# The fillets cases that fail today on solidcore, one a line: `<case> <why it fails today>`. Sorted.
# The kernel rig gate fails on a case that fails and is not listed, and on a listed case that passes.
# Baseline: solidcore pin 8ddce9016, tests/kernel-cases run by `cargo xtask kernel-cases`, x86_64 Linux.
1080-fillet-equal-slope-basin-1-mm-rim-loop-4 [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0',  want >= g1 at every blend seam
1080-fillet-sloped-basin-1-mm-rim-r4-2-edges [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0',  want >= g1 at every blend seam
1080-fillet-sloped-basin-1-mm-rim-r4-4-edges [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0',  want >= g1 at every blend seam
2893-chamfer-distance-and-angle-past-the-wall-refused [fail] refused, but not because "angle": step 2 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT)
2893-chamfer-two-distances-elliptical-rim [fail] refused, but not because "not supported yet": step 3 (solid.chamfer): SMLib chamfer: operation: SMLib failed (status 1001) (tangent propagation blended the picked edges' tangent chain with them; with it off, tangent_chain: 
4782-fillet-bar-edge-wider-than-both-faces [fail] continuity_order: got Box: no null seams want >= g1 at every blend seam
9-fillet-corner-curvature-with-reduce-fit [unsupported] solid.fillet builds `corner: g2` with `fit: exact` only
9-fillet-corner-curvature-with-taper-fit [unsupported] solid.fillet builds `corner: g2` with `fit: exact` only
cov-fillet-g2-corner-beside-a-cylinder [fail] step 6 (solid.fillet): the open setback corner is not a closed solid, as on SMLib d01d7b0
cov-fillet-g2-five-edge-apex-corner [fail] step 12 (solid.fillet): invalid input: the setback must be more than 3.5056 mm at the corner (-0.000, 0.000, 30.000): the rounds' contact lines meet 3
cov-fillet-g2-four-edge-apex-corner [fail] step 11 (solid.fillet): invalid input: the setback must be more than 3.9027 mm at the corner (0.000, 0.000, 30.000): the rounds' contact lines meet 3.
cov-fillet-g2-mixed-corner [unsupported] refused as on SMLib d01d7b0: a G2 corner is set back only where every edge meeting it is rounded and all are convex or all concave
cov-fillet-g2-oblique-three-edge-corner [unsupported] refused on solidcore: its three edges meet at different wedge angles, and one curvature fillet takes the first edge's equal-area thumbweight for every edge (solidcore#2250, issuecomment-6563419897); SMLib d01d7b0 fails it too
cov-fillet-g2-pocket-corner [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0
cov-junction-boss-tilt-20-root-round [fail] fillet status 1001 on a cylinder tilted 20 degrees into the plate, as on SMLib
cov-junction-boss-tilt-40-root-round [fail] fillet status 1001 on a cylinder tilted 40 degrees into the plate, as on SMLib
cov-junction-tee-equal-round [fail] the result is not a closed solid, as on SMLib: equal pipes' intersection is two plane ellipses crossing, a corner the old corner code cannot join (the corner step)
cov-junction-y-junction-120-round [unsupported] refused as on SMLib: the faces between the three intersection curves narrow to nothing at the two triple points, so the room check trips (the corner step)
report-drafted-peg-front-and-concave-rounds-together-r2 [unsupported] step 13 (solid.fillet): invalid input: not supported yet: the fillet meets a corner of this kind, which SMLib's blends do not handle yet (where its ed
report-fillet-curvature-three-edges-at-bar-corner [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING)
report-fillet-curvature-three-edges-at-bar-corner-solver-residues [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING)
