diff --git a/tests/kernel-cases/fillets/skipped.json b/tests/kernel-cases/fillets/skipped.json new file mode 100644 index 0000000000..b6ed754cab --- /dev/null +++ b/tests/kernel-cases/fillets/skipped.json @@ -0,0 +1,1150 @@ +[ + { + "source": "tangency-labs/solidcraft#4160", + "why": "sketch fillet of two 3D-sketch curves refused (\"a must be a line\"): 3D sketch, not solid geometry" + }, + { + "source": "tangency-labs/solidcraft#4157", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4145", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: both faces next to the edge must be planar)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4140", + "why": "private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild)" + }, + { + "source": "tangency-labs/solidcraft#4137", + "why": "empty report: the body was never filled in, no geometry or error recorded" + }, + { + "source": "tangency-labs/solidcraft#4133", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4097", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#4083", + "why": "private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild)" + }, + { + "source": "tangency-labs/solidcraft#4079", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: both ends touch the same face\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4076", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4066", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 3.5 mm is too large for this chamfer: the result changes 1732 mm\u00b3 of the part, more than the chamfer can (at most 328 mm\u00b3)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4047", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4034", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#4027", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3982", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3971", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3943", + "why": "could not be reproduced on a plain rebuild (cylinder with a shaft; a 10 mm peg chamfers at 1 mm); the private design is needed" + }, + { + "source": "tangency-labs/solidcraft#3910", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3854", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3853", + "why": "other area: sheet-metal" + }, + { + "source": "tangency-labs/solidcraft#3763", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#3747", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#3746", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: both faces next to the edge must be planar)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3739", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3735", + "why": "empty report: the body was never filled in, no geometry or error recorded" + }, + { + "source": "tangency-labs/solidcraft#3721", + "why": "other area: shell (including the plastic lip on a shelled rim)" + }, + { + "source": "tangency-labs/solidcraft#3694", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3686", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: degenerate rolling-ball spine\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3684", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the resampled spine (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3651", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend does not cross the edge between the end faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3644", + "why": "auto-filed from a private design: only the pick points and the error \"invalid parameters for `solid.chamfer`: no edge at [0.000000000000002136321436930869, -5.9999999999999885, -183]: the nearest edge is 258.940 mm away\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3630", + "why": "report without a reproducible description (picture only or several vague problems)" + }, + { + "source": "tangency-labs/solidcraft#3611", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3606", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3587", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is taller than the walls\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3575", + "why": "private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild)" + }, + { + "source": "tangency-labs/solidcraft#3573", + "why": "other area: shell (including the plastic lip on a shelled rim)" + }, + { + "source": "tangency-labs/solidcraft#3572", + "why": "report without a reproducible description (picture only or several vague problems)" + }, + { + "source": "tangency-labs/solidcraft#3565", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3562", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend's end on its end face\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3561", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius that fits is 0.075 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3549", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3533", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3520", + "why": "auto-filed from a private design: only the pick points and the error \"invalid parameters for `sketch.fillet`: the lines must share a corner point\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3508", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the edge\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3501", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the edge ends must be planar\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3493", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3468", + "why": "other area: shell (offset face next to a fillet)" + }, + { + "source": "tangency-labs/solidcraft#3464", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius that fits is 1 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3462", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3454", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#3445", + "why": "empty template: only a pick and a 20.5 mm distance are recorded, no description or error" + }, + { + "source": "tangency-labs/solidcraft#3442", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3436", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3418", + "why": "other area: sheet-metal" + }, + { + "source": "tangency-labs/solidcraft#3401", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3398", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3392", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3377", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3370", + "why": "UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369" + }, + { + "source": "tangency-labs/solidcraft#3342", + "why": "documented limit of G2 fillets (curved or non-perpendicular ends are refused with a clear message): no closed form for the corner blend" + }, + { + "source": "tangency-labs/solidcraft#3333", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3317", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than a corner radius (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3284", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3282", + "why": "empty report: the body was never filled in, no geometry or error recorded" + }, + { + "source": "tangency-labs/solidcraft#3233", + "why": "report without a reproducible description (picture only or several vague problems)" + }, + { + "source": "tangency-labs/solidcraft#3180", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend uses up a neighbouring face with more edges\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3172", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3169", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3125", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 1 mm is too large for this chamfer: the result changes 77 mm\u00b3 of the part, more than the chamfer can (at most 22 mm\u00b3)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3119", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3115", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3091", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 20 mm is too large for this fillet: it runs past the faces beside the edge into other geometry; the largest radius that fits is 19.21 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3085", + "why": "other area: import (STEP geometry or crashes); the STEP fixture is not in the source" + }, + { + "source": "tangency-labs/solidcraft#3082", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: only straight edges\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3075", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#3064", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 6 mm is too large for this fillet: it runs past the faces beside the edge into other geometry\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3062", + "why": "claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2986", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2983", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2976", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2972", + "why": "auto-filed from a private design: only the pick points and the error \"invalid input: the edge at [0.012, -28.000, 18.000] is smooth: the faces on either side meet tangentially there, so there is no corner to fillet; pick the sharp\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2971", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2966", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2921", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2874", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2822", + "why": "other area: threads" + }, + { + "source": "tangency-labs/solidcraft#2800", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 5 mm is too large for this fillet: it runs past the faces beside the edge into other geometry; the largest radius that fits is 4.429 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2794", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: blending a loop with sharp corners next to arcs\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2784", + "why": "could not be reproduced on a plain rebuild (cylinder with a shaft; a 10 mm peg chamfers at 1 mm); the private design is needed" + }, + { + "source": "tangency-labs/solidcraft#2781", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 5.5 mm is too large for this chamfer: the result changes 2557 mm\u00b3 of the part, more than the chamfer can (at most 423 mm\u00b3)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2771", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is taller than the walls\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2711", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#2706", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the edge ends must be perpendicular to the edge\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2704", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2703", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2699", + "why": "report without a reproducible description (picture only or several vague problems)" + }, + { + "source": "tangency-labs/solidcraft#2695", + "why": "request that a chamfer too large clips instead of erroring (depends on a private design that could not be reproduced); the clipping behaviour is not defined" + }, + { + "source": "tangency-labs/solidcraft#2694", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is taller than the walls\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2692", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2690", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2686", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#2663", + "why": "meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2654", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: only straight edges\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2653", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2593", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the edge ends must be planar\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2591", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#2589", + "why": "auto-filed from a private design: only the pick points and the error \"invalid input: the edge at [6.000, 50.000, 4.000] is smooth: the faces on either side meet tangentially there, so there is no corner to chamfer; pick the sharp \" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2573", + "why": "empty report: the body was never filled in, no geometry or error recorded" + }, + { + "source": "tangency-labs/solidcraft#2567", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2538", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2533", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2532", + "why": "empty report: the body was never filled in, no geometry or error recorded" + }, + { + "source": "tangency-labs/solidcraft#2519", + "why": "empty report: the body was never filled in, no geometry or error recorded" + }, + { + "source": "tangency-labs/solidcraft#2500", + "why": "auto-filed from a private design: only the pick points and the error \"invalid parameters for `sketch.fillet`: the radius is too large for that corner (it needs 5.000 mm of each line)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2477", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: chamfers ending at a concave corner\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2472", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2439", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a fillet larger than the faces next to it; the largest radius that fits is 50.82 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2422", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the edge\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2420", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2408", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2394", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2383", + "why": "auto-filed from a private design: only the pick points and the error \"invalid input: the edge at [-165.794, 33.018, 10.000] is smooth: the faces on either side meet tangentially there, so there is no corner to chamfer; pick the sh\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2379", + "why": "auto-filed from a private design: only the pick points and the error \"invalid parameters for `sketch.fillet`: fillets and chamfers work on two lines\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2375", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the edge ends must be planar\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2320", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#2318", + "why": "other area: import (STEP geometry or crashes); the STEP fixture is not in the source" + }, + { + "source": "tangency-labs/solidcraft#2301", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#2296", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2269", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2245", + "why": "auto-filed from a private design: only the pick points and the error \"fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2230", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: an end face almost along the edge\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2215", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2213", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2192", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2189", + "why": "auto-filed from a private design: only the pick points and the error \"curve blend: could not fit the rolling-ball surface within the accuracy and section limits\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2174", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#2170", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2135", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2128", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2116", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a blend ending in an earlier round\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2083", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2081", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: seams on both sides of a corner of the edge chain (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2051", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2042", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2040", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1955", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces; the largest radius that fits is 4 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1951", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: 10 mm is too large for this chamfer: it runs past the faces beside the edge into other geometry; the largest size that fits is 7.5 mm\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1945", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1940", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: seams on both sides of a corner of the edge chain (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1933", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1876", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1875", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1824", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1792", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: only straight edges\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1774", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1728", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is taller than the walls\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1719", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1692", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1691", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1690", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1617", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1597", + "why": "meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1573", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1572", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: each end of the edge must touch exactly one more face\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1553", + "why": "render interchange (glTF/Blender export), no geometry" + }, + { + "source": "tangency-labs/solidcraft#1535", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1389", + "why": "auto-filed from a private design: only the pick points and the error \"curve blend: could not fit the rolling-ball surface within the accuracy and section limits (the operation failed: not supported yet: only straight edges can be \" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1384", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1370", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1303", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1293", + "why": "no longer reproduces; the hinge knuckle cap circle is oracle case 63-hinge-knuckle" + }, + { + "source": "tangency-labs/solidcraft#1276", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1275", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1263", + "why": "other area: tessellation" + }, + { + "source": "tangency-labs/solidcraft#1228", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1219", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1208", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1198", + "why": "other area: import (STEP export of fillet faces as B-splines)" + }, + { + "source": "tangency-labs/solidcraft#1183", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1113", + "why": "other area: tessellation" + }, + { + "source": "tangency-labs/solidcraft#1092", + "why": "other area: sheet-metal" + }, + { + "source": "tangency-labs/solidcraft#1090", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1039", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1030", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#1026", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1001", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#992", + "why": "auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#989", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#984", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#903", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the blend is larger than the neighbouring faces\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#884", + "why": "fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame)" + }, + { + "source": "tangency-labs/solidcraft#882", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#828", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: both faces next to the edge must be planar)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#827", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#818", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#796", + "why": "other area: tessellation" + }, + { + "source": "tangency-labs/solidcraft#775", + "why": "topological naming after a timeline edit (shell thickness changed): fillet picks follow, no solid geometry of its own" + }, + { + "source": "tangency-labs/solidcraft#769", + "why": "surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer" + }, + { + "source": "tangency-labs/solidcraft#764", + "why": "surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer" + }, + { + "source": "tangency-labs/solidcraft#691", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: degenerate rolling-ball spine\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#612", + "why": "other area: import (STEP export of fillet faces as B-splines)" + }, + { + "source": "tangency-labs/solidcraft#493", + "why": "sketch attachment to cut walls and chamfer faces: sketch plane selection, not blend geometry" + }, + { + "source": "tangency-labs/solidcraft#438", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the ends of the edges must be square to them (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#431", + "why": "fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame)" + }, + { + "source": "tangency-labs/solidcraft#397", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the ends of the edges must be square to them (the operation failed: not supported yet: only straight edges can be blended)\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#391", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#311", + "why": "other area: tessellation" + }, + { + "source": "tangency-labs/solidcraft#293", + "why": "feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81" + }, + { + "source": "tangency-labs/solidcraft#215", + "why": "auto-filed from a private design: only the pick points and the error \"not supported yet: the faces at the edge ends must be perpendicular to the edge\" are recorded, no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#68", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#58", + "why": "saddle fillet between two cylinders: volume, area and counts are right and the defect is a 0.05 mm surface deviation from the rolling-ball envelope: needs a surface-deviation grading field the rig lacks (tests/oracle/35 holds the geometry)" + }, + { + "source": "tangency-labs/solidcraft#52", + "why": "feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source" + }, + { + "source": "tangency-labs/solidcraft#46", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#29", + "why": "other area: shell (including the plastic lip on a shelled rim)" + }, + { + "source": "tangency-labs/solidcraft#15", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#10", + "why": "meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#9", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#4106", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#3908", + "why": "claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3898", + "why": "other area: shell (offset face next to a fillet)" + }, + { + "source": "tangency-labs/solidcraft#3864", + "why": "other area: import (STEP geometry or crashes); the STEP fixture is not in the source" + }, + { + "source": "tangency-labs/solidcraft#3860", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#3842", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#3716", + "why": "surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer" + }, + { + "source": "tangency-labs/solidcraft#3576", + "why": "other area: shell (including the plastic lip on a shelled rim)" + }, + { + "source": "tangency-labs/solidcraft#3552", + "why": "claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3548", + "why": "curved chain ending across two planar end faces (an L-shaped wall on a plate with slanted sides): fixture not described precisely enough to rebuild, no closed-form volume" + }, + { + "source": "tangency-labs/solidcraft#3465", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#3437", + "why": "UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369" + }, + { + "source": "tangency-labs/solidcraft#3400", + "why": "UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369" + }, + { + "source": "tangency-labs/solidcraft#3297", + "why": "claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#3190", + "why": "curved chain ending across two planar end faces (an L-shaped wall on a plate with slanted sides): fixture not described precisely enough to rebuild, no closed-form volume" + }, + { + "source": "tangency-labs/solidcraft#3179", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#3150", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#3106", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#2894", + "why": "right answer is a design choice (refuse, or cut through the faces) for chamfers wider than the faces they join: not gradeable without picking one" + }, + { + "source": "tangency-labs/solidcraft#2856", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#2490", + "why": "chamfer of a straight lip at a tangent wall junction: the reconstruction file is not in the source and 20 mm slot, 60 mm extrusion and R60 cut are not enough to rebuild it" + }, + { + "source": "tangency-labs/solidcraft#2488", + "why": "surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer" + }, + { + "source": "tangency-labs/solidcraft#2487", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#2485", + "why": "mitre between separately created bottom rounds plus the upright, R2, on a shelled 40 x 80 x 27 box: the mitre pick is not given and no closed form; the same rounds-meeting-a-mitre geometry is case 1557" + }, + { + "source": "tangency-labs/solidcraft#2194", + "why": "claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild" + }, + { + "source": "tangency-labs/solidcraft#2044", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#2041", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#2002", + "why": "feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81" + }, + { + "source": "tangency-labs/solidcraft#1854", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1826", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1684", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#1642", + "why": "surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer" + }, + { + "source": "tangency-labs/solidcraft#1543", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1533", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1421", + "why": "other area: booleans" + }, + { + "source": "tangency-labs/solidcraft#1420", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1394", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1372", + "why": "chamfer chain ending at two existing bevels: only the removed volume (49.147) is quoted, the U-shaped part is not described" + }, + { + "source": "tangency-labs/solidcraft#1356", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#1314", + "why": "other area: sheet-metal" + }, + { + "source": "tangency-labs/solidcraft#1282", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1281", + "why": "other area: tessellation" + }, + { + "source": "tangency-labs/solidcraft#1249", + "why": "surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer" + }, + { + "source": "tangency-labs/solidcraft#1176", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#1136", + "why": "feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source" + }, + { + "source": "tangency-labs/solidcraft#1066", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#978", + "why": "other area: sheet-metal" + }, + { + "source": "tangency-labs/solidcraft#962", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#949", + "why": "fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame)" + }, + { + "source": "tangency-labs/solidcraft#855", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#811", + "why": "other area: tessellation" + }, + { + "source": "tangency-labs/solidcraft#810", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#789", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#777", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#776", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#752", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#749", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#675", + "why": "variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request" + }, + { + "source": "tangency-labs/solidcraft#625", + "why": "sketch attachment to cut walls and chamfer faces: sketch plane selection, not blend geometry" + }, + { + "source": "tangency-labs/solidcraft#618", + "why": "other area: threads" + }, + { + "source": "tangency-labs/solidcraft#477", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#404", + "why": "refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)" + }, + { + "source": "tangency-labs/solidcraft#388", + "why": "feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81" + }, + { + "source": "tangency-labs/solidcraft#362", + "why": "fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form" + }, + { + "source": "tangency-labs/solidcraft#132", + "why": "feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source" + }, + { + "source": "tangency-labs/solidcraft#121", + "why": "sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade" + }, + { + "source": "tangency-labs/solidcraft#109", + "why": "UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#108", + "why": "fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form" + }, + { + "source": "tangency-labs/solidcraft#102", + "why": "fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form" + } +] \ No newline at end of file