mirror of
https://github.com/bherbruck/solidcraft.git
synced 2026-11-04 11:05:56 +00:00
kernel-cases: the ladder's golden recorded after the thread rework
Recorded on SMLib replay 2c5baae (screw sweep walls exact and within their tolerance, the radial sweep, the point solve on long rational surfaces) with the thread rework: 06/008 (two starts) and 06/009 (runout) now graded and passing, 06/011-017 new (Tr, Acme, S, ASME buttress, an internal Tr nut, left hand, the chamfered tip), and 06/003, 004 and 007 grading the extent and the collar. 132/135 pass; left: 07/013 corner setback, 07/015 G2 corners (unsupported) and 07/016 three sequential corner rounds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
jyviko
+98
-91
@@ -13,7 +13,7 @@ The **frontier** is the first case of a tier, in ladder order, that fails (fail,
|
||||
| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 10 | 10 pass | – |
|
||||
| 04-spline-profiles | spline profiles, sweeps and lofts | 12 | 12 pass | – |
|
||||
| 05-holes-and-taps | holes and tapped holes | 13 | 13 pass | – |
|
||||
| 06-threads | modelled threads | 10 | 8 pass, 2 unsupported | – |
|
||||
| 06-threads | modelled threads | 17 | 17 pass | – |
|
||||
| 07-fillets | constant, variable and corner fillets | 17 | 1 fail, 14 pass, 2 unsupported | 016-corner-three-sequential-r5-r3-r7 |
|
||||
| 08-chamfers | chamfers | 8 | 8 pass | – |
|
||||
| 09-shells-and-offsets | shells and offsets | 15 | 15 pass | – |
|
||||
@@ -28,131 +28,138 @@ Times are the commands' own, in seconds, from the case's process; **golden** is
|
||||
|
||||
| Case | What | Answer | Result | s | golden s | changes |
|
||||
|---|---|---|---|---|---|---|
|
||||
| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.002 | 0.002 | |
|
||||
| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.005 | 0.005 | |
|
||||
| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.014 | 0.014 | |
|
||||
| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.003 | 0.003 | |
|
||||
| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.003 | 0.003 | |
|
||||
| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.016 | 0.016 | |
|
||||
| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.028 | 0.028 | |
|
||||
| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.463 | 0.463 | |
|
||||
| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.025 | 0.025 | |
|
||||
| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.496 | 0.496 | |
|
||||
| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.006 | 0.006 | |
|
||||
| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | 0.007 | |
|
||||
| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.011 | 0.011 | |
|
||||
| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.006 | 0.006 | |
|
||||
| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.007 | 0.007 | |
|
||||
| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.012 | 0.012 | |
|
||||
| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.012 | 0.012 | |
|
||||
| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | |
|
||||
| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.013 | 0.013 | |
|
||||
| ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.013 | 0.013 | |
|
||||
| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.013 | 0.013 | |
|
||||
| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.013 | 0.013 | |
|
||||
| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.016 | 0.016 | |
|
||||
| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.014 | 0.014 | |
|
||||
| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.015 | 0.015 | |
|
||||
| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.015 | 0.015 | |
|
||||
| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.016 | 0.016 | |
|
||||
| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.019 | 0.019 | |
|
||||
| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.018 | 0.018 | |
|
||||
| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.023 | 0.023 | |
|
||||
| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.026 | 0.026 | |
|
||||
| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.026 | 0.026 | |
|
||||
| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.030 | 0.030 | |
|
||||
| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.035 | 0.035 | |
|
||||
| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.023 | 0.023 | |
|
||||
| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.027 | 0.027 | |
|
||||
| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.027 | 0.027 | |
|
||||
| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.028 | 0.028 | |
|
||||
| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.035 | 0.035 | |
|
||||
| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.039 | 0.039 | |
|
||||
| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.043 | 0.043 | |
|
||||
| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.042 | 0.042 | |
|
||||
| ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.060 | 0.060 | |
|
||||
| ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.067 | 0.067 | |
|
||||
| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.108 | 0.108 | |
|
||||
| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.176 | 0.176 | |
|
||||
| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.036 | 1.036 | |
|
||||
| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.111 | 0.111 | |
|
||||
| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.185 | 0.185 | |
|
||||
| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.053 | 1.053 | |
|
||||
| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.007 | 0.007 | |
|
||||
| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.012 | 0.012 | |
|
||||
| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.014 | 0.014 | |
|
||||
| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.016 | 0.016 | |
|
||||
| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.016 | 0.016 | |
|
||||
| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.028 | 0.028 | |
|
||||
| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.033 | 0.033 | |
|
||||
| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.034 | 0.034 | |
|
||||
| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.039 | 0.039 | |
|
||||
| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.065 | 0.065 | |
|
||||
| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.072 | 0.072 | |
|
||||
| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.074 | 0.074 | |
|
||||
| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.008 | 0.008 | |
|
||||
| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.014 | 0.014 | |
|
||||
| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.060 | 0.060 | |
|
||||
| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.066 | 0.066 | |
|
||||
| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.079 | 0.079 | |
|
||||
| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.010 | 0.010 | |
|
||||
| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.015 | 0.015 | |
|
||||
| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.021 | 0.021 | |
|
||||
| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.029 | 0.029 | |
|
||||
| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.031 | 0.031 | |
|
||||
| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.037 | 0.037 | |
|
||||
| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.035 | 0.035 | |
|
||||
| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.039 | 0.039 | |
|
||||
| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.079 | 0.079 | |
|
||||
| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.081 | 0.081 | |
|
||||
| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.095 | 0.095 | |
|
||||
| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.499 | 0.499 | |
|
||||
| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.130 | 1.130 | |
|
||||
| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.018 | 0.018 | |
|
||||
| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.043 | 0.043 | |
|
||||
| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.081 | 0.081 | |
|
||||
| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.086 | 0.086 | |
|
||||
| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.106 | 0.106 | |
|
||||
| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.475 | 0.475 | |
|
||||
| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.126 | 1.126 | |
|
||||
| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.018 | 0.018 | |
|
||||
| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.018 | 0.018 | |
|
||||
| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.019 | 0.019 | |
|
||||
| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.019 | 0.019 | |
|
||||
| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.023 | 0.023 | |
|
||||
| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.024 | 0.024 | |
|
||||
| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.023 | 0.023 | |
|
||||
| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.025 | 0.025 | |
|
||||
| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.030 | 0.030 | |
|
||||
| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.049 | 0.049 | |
|
||||
| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.053 | 0.053 | |
|
||||
| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.061 | 0.061 | |
|
||||
| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.061 | 0.061 | |
|
||||
| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.064 | 0.064 | |
|
||||
| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.068 | 0.068 | |
|
||||
| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.072 | 0.072 | |
|
||||
| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.235 | 0.235 | |
|
||||
| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 0.622 | 0.622 | |
|
||||
| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.660 | 0.660 | |
|
||||
| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 0.726 | 0.726 | |
|
||||
| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 1.219 | 1.219 | |
|
||||
| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 1.231 | 1.231 | |
|
||||
| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.337 | 1.337 | |
|
||||
| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.390 | 1.390 | |
|
||||
| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.362 | 2.362 | |
|
||||
| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) | invariants | not supported yet: solid.thread has no start count: multi-start threads | – | – | |
|
||||
| ladder/06-threads/009-thread-runout-length | an M10 thread that vanishes over a 2-pitch runout before a shoulder | invariants | not supported yet: solid.thread has no runout (vanishing thread) length | – | – | |
|
||||
| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.003 | 0.003 | |
|
||||
| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.082 | 0.082 | |
|
||||
| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.222 | 0.222 | |
|
||||
| ladder/06-threads/012-external-acme-3-4-6 | a modelled 3/4-6 ACME thread (ASME B1.5, general purpose) on a 3/4 in shaft, six turns | analytic | pass | 0.579 | 0.579 | |
|
||||
| ladder/06-threads/013-external-s20x4 | a modelled metric buttress S20x4 thread (DIN 513, 3/30 deg) on a d20 shaft, six turns | analytic | pass | 0.597 | 0.597 | |
|
||||
| ladder/06-threads/011-external-tr20x4 | a modelled trapezoidal Tr20x4 thread (ISO 2904) on a d20 shaft, six turns | analytic | pass | 0.612 | 0.612 | |
|
||||
| ladder/06-threads/015-internal-tr20x4-nut | a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block | analytic | pass | 0.615 | 0.615 | |
|
||||
| ladder/06-threads/014-external-buttress-asme-1.5-8 | a modelled 1.5-8 buttress thread (ASME B1.9 basic profile, 7/45 deg) on a 1.5 in shaft, six turns | analytic | pass | 0.673 | 0.673 | |
|
||||
| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.701 | 0.701 | |
|
||||
| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm from the top end (`from`): it stops square in the middle of the face | analytic | pass | 0.827 | 0.827 | |
|
||||
| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.107 | 1.107 | |
|
||||
| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet: it stops clear of the fillet | analytic | pass | 1.364 | 1.364 | |
|
||||
| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder: it stops clear of it, the collar whole | analytic | pass | 1.367 | 1.367 | |
|
||||
| ladder/06-threads/009-thread-runout-length | 004's M10 thread run from the free top end, vanishing over a 3 mm (2 P) runout before the d16 shoulder | analytic | pass | 1.432 | 1.432 | |
|
||||
| ladder/06-threads/016-external-m10-left-hand | 001's modelled M10 thread, left-handed: the same volume, turning the other way | analytic | pass | 1.564 | 1.564 | |
|
||||
| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.637 | 1.637 | |
|
||||
| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.652 | 1.652 | |
|
||||
| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.412 | 2.412 | |
|
||||
| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) over a d10 x 30 cylinder | analytic | pass | 3.155 | 3.155 | |
|
||||
| ladder/06-threads/017-external-m10-chamfered-tip | 001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the minor diameter, cut after the groove | analytic | pass | 3.245 | 3.245 | |
|
||||
| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.005 | 0.005 | |
|
||||
| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.007 | 0.007 | |
|
||||
| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.007 | 0.007 | |
|
||||
| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.010 | 0.010 | |
|
||||
| ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.011 | 0.011 | |
|
||||
| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.011 | 0.011 | |
|
||||
| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.012 | 0.012 | |
|
||||
| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | 0.012 | |
|
||||
| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.014 | 0.014 | |
|
||||
| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | 0.018 | |
|
||||
| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.019 | 0.019 | |
|
||||
| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.020 | 0.020 | |
|
||||
| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.019 | 0.019 | |
|
||||
| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) | 0.026 | 0.026 | |
|
||||
| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.030 | 0.030 | |
|
||||
| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | |
|
||||
| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.029 | 0.029 | |
|
||||
| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.031 | 0.031 | |
|
||||
| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.039 | 0.039 | |
|
||||
| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.044 | 0.044 | |
|
||||
| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.389 | 0.389 | |
|
||||
| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.405 | 0.405 | |
|
||||
| ladder/07-fillets/013-corner-setback | three r5 rounds at a corner with setbacks of 8 mm along each edge | invariants | not supported yet: solid.fillet has no corner setback distances | – | – | |
|
||||
| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.006 | 0.006 | |
|
||||
| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.006 | 0.006 | |
|
||||
| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.007 | 0.007 | |
|
||||
| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.008 | 0.008 | |
|
||||
| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.010 | 0.010 | |
|
||||
| ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | |
|
||||
| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.018 | 0.018 | |
|
||||
| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.027 | 0.027 | |
|
||||
| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | |
|
||||
| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.519 | 0.519 | |
|
||||
| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.009 | 0.009 | |
|
||||
| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.039 | 0.039 | |
|
||||
| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.514 | 0.514 | |
|
||||
| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.016 | 0.016 | |
|
||||
| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.031 | 0.031 | |
|
||||
| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.040 | 0.040 | |
|
||||
| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.042 | 0.042 | |
|
||||
| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.054 | 0.054 | |
|
||||
| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.090 | 0.090 | |
|
||||
| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.090 | 0.090 | |
|
||||
| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.098 | 0.098 | |
|
||||
| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.123 | 0.123 | |
|
||||
| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.692 | 0.692 | |
|
||||
| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.868 | 0.868 | |
|
||||
| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.043 | 0.043 | |
|
||||
| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.066 | 0.066 | |
|
||||
| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.094 | 0.094 | |
|
||||
| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.095 | 0.095 | |
|
||||
| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.101 | 0.101 | |
|
||||
| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.132 | 0.132 | |
|
||||
| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.685 | 0.685 | |
|
||||
| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.853 | 0.853 | |
|
||||
| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.017 | 0.017 | |
|
||||
| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.036 | 0.036 | |
|
||||
| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.039 | 0.039 | |
|
||||
| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.155 | 0.155 | |
|
||||
| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.244 | 0.244 | |
|
||||
| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.353 | 0.353 | |
|
||||
| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.670 | 0.670 | |
|
||||
| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.469 | 1.469 | |
|
||||
| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.071 | 0.071 | |
|
||||
| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.503 | 0.503 | |
|
||||
| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.769 | 1.769 | |
|
||||
| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.096 | 2.096 | |
|
||||
| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.035 | 0.035 | |
|
||||
| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.050 | 0.050 | |
|
||||
| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.153 | 0.153 | |
|
||||
| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.236 | 0.236 | |
|
||||
| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.346 | 0.346 | |
|
||||
| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.678 | 0.678 | |
|
||||
| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.482 | 1.482 | |
|
||||
| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.059 | 0.059 | |
|
||||
| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.536 | 0.536 | |
|
||||
| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.665 | 1.665 | |
|
||||
| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.150 | 2.150 | |
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -4,9 +4,9 @@
|
||||
"cases": [
|
||||
"ladder/01-primitives/001-box",
|
||||
"ladder/01-primitives/005-sphere",
|
||||
"ladder/01-primitives/003-cone",
|
||||
"ladder/01-primitives/004-frustum",
|
||||
"ladder/01-primitives/002-cylinder",
|
||||
"ladder/01-primitives/003-cone",
|
||||
"ladder/01-primitives/006-torus"
|
||||
],
|
||||
"tier": "01-primitives",
|
||||
@@ -15,24 +15,24 @@
|
||||
{
|
||||
"cases": [
|
||||
"ladder/02-booleans/004-edge-on-edge-no-overlap",
|
||||
"ladder/02-booleans/016-v-groove-pinches-bottom-to-line",
|
||||
"ladder/02-booleans/015-knife-edge-wedge-cut",
|
||||
"ladder/02-booleans/020-part-back-wall",
|
||||
"ladder/02-booleans/001-coincident-face-join",
|
||||
"ladder/02-booleans/014-cut-through-sphere-pole",
|
||||
"ladder/02-booleans/020-part-back-wall",
|
||||
"ladder/02-booleans/016-v-groove-pinches-bottom-to-line",
|
||||
"ladder/02-booleans/003-pocket-flush-with-top",
|
||||
"ladder/02-booleans/019-notch-flush-with-end-face",
|
||||
"ladder/02-booleans/002-coplanar-overlap-join",
|
||||
"ladder/02-booleans/008-near-tangent-gap-1e-6",
|
||||
"ladder/02-booleans/010-near-tangent-overlap-1e-6",
|
||||
"ladder/02-booleans/007-near-tangent-gap-1e-3",
|
||||
"ladder/02-booleans/017-cylinder-tangent-top-and-bottom",
|
||||
"ladder/02-booleans/006-tangent-along-line-no-overlap",
|
||||
"ladder/02-booleans/018-hole-tangent-to-side-face",
|
||||
"ladder/02-booleans/007-near-tangent-gap-1e-3",
|
||||
"ladder/02-booleans/010-near-tangent-overlap-1e-6",
|
||||
"ladder/02-booleans/009-near-tangent-overlap-1e-3",
|
||||
"ladder/02-booleans/017-cylinder-tangent-top-and-bottom",
|
||||
"ladder/02-booleans/005-vertex-on-face-no-overlap",
|
||||
"ladder/02-booleans/011-tangent-along-circle-through-hole",
|
||||
"ladder/02-booleans/018-hole-tangent-to-side-face",
|
||||
"ladder/02-booleans/013-cut-across-cylinder-seam",
|
||||
"ladder/02-booleans/008-near-tangent-gap-1e-6",
|
||||
"ladder/02-booleans/011-tangent-along-circle-through-hole",
|
||||
"ladder/02-booleans/012-tangent-along-circle-bowl",
|
||||
"ladder/02-booleans/022-cylinder-grazing-a-hole-edge",
|
||||
"ladder/02-booleans/021-holes-touching-at-a-point",
|
||||
@@ -45,15 +45,15 @@
|
||||
},
|
||||
{
|
||||
"cases": [
|
||||
"ladder/03-analytic-profiles/006-revolve-partial-90",
|
||||
"ladder/03-analytic-profiles/008-extrude-slot",
|
||||
"ladder/03-analytic-profiles/001-extrude-rect-with-arc-end",
|
||||
"ladder/03-analytic-profiles/007-revolve-180-touching-axis",
|
||||
"ladder/03-analytic-profiles/006-revolve-partial-90",
|
||||
"ladder/03-analytic-profiles/008-extrude-slot",
|
||||
"ladder/03-analytic-profiles/003-extrude-tapered-circle",
|
||||
"ladder/03-analytic-profiles/002-extrude-annulus",
|
||||
"ladder/03-analytic-profiles/004-revolve-full-off-axis",
|
||||
"ladder/03-analytic-profiles/003-extrude-tapered-circle",
|
||||
"ladder/03-analytic-profiles/009-part-boss-and-slot",
|
||||
"ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere",
|
||||
"ladder/03-analytic-profiles/009-part-boss-and-slot",
|
||||
"ladder/03-analytic-profiles/010-revolve-horn-torus-270"
|
||||
],
|
||||
"tier": "03-analytic-profiles",
|
||||
@@ -61,13 +61,13 @@
|
||||
},
|
||||
{
|
||||
"cases": [
|
||||
"ladder/04-spline-profiles/001-extrude-bezier-arch",
|
||||
"ladder/04-spline-profiles/005-loft-square-frustum",
|
||||
"ladder/04-spline-profiles/001-extrude-bezier-arch",
|
||||
"ladder/04-spline-profiles/008-loft-square-to-circle",
|
||||
"ladder/04-spline-profiles/009-extrude-periodic-fit-spline",
|
||||
"ladder/04-spline-profiles/006-loft-circle-frustum",
|
||||
"ladder/04-spline-profiles/004-sweep-square-along-bezier",
|
||||
"ladder/04-spline-profiles/007-loft-three-circles",
|
||||
"ladder/04-spline-profiles/006-loft-circle-frustum",
|
||||
"ladder/04-spline-profiles/003-pipe-along-bezier",
|
||||
"ladder/04-spline-profiles/002-revolve-bezier-profile",
|
||||
"ladder/04-spline-profiles/010-part-bezier-window",
|
||||
@@ -80,17 +80,17 @@
|
||||
{
|
||||
"cases": [
|
||||
"ladder/05-holes-and-taps/006-tapped-m6-through",
|
||||
"ladder/05-holes-and-taps/001-simple-through",
|
||||
"ladder/05-holes-and-taps/009-hole-0.5-from-edge",
|
||||
"ladder/05-holes-and-taps/010-hole-tangent-to-end-face",
|
||||
"ladder/05-holes-and-taps/003-drilled-blind-118",
|
||||
"ladder/05-holes-and-taps/007-tapped-m8-blind",
|
||||
"ladder/05-holes-and-taps/002-simple-blind-flat",
|
||||
"ladder/05-holes-and-taps/001-simple-through",
|
||||
"ladder/05-holes-and-taps/004-counterbore",
|
||||
"ladder/05-holes-and-taps/005-countersink",
|
||||
"ladder/05-holes-and-taps/011-crossing-holes-steinmetz",
|
||||
"ladder/05-holes-and-taps/008-tapped-m5-into-curved-face",
|
||||
"ladder/05-holes-and-taps/012-crossing-tapped-holes-offset",
|
||||
"ladder/05-holes-and-taps/005-countersink",
|
||||
"ladder/05-holes-and-taps/008-tapped-m5-into-curved-face",
|
||||
"ladder/05-holes-and-taps/013-part-holes"
|
||||
],
|
||||
"tier": "05-holes-and-taps",
|
||||
@@ -98,22 +98,22 @@
|
||||
},
|
||||
{
|
||||
"cases": [
|
||||
"ladder/06-threads/003-external-m10-partial-length",
|
||||
"ladder/06-threads/012-external-acme-3-4-6",
|
||||
"ladder/06-threads/013-external-s20x4",
|
||||
"ladder/06-threads/011-external-tr20x4",
|
||||
"ladder/06-threads/015-internal-tr20x4-nut",
|
||||
"ladder/06-threads/014-external-buttress-asme-1.5-8",
|
||||
"ladder/06-threads/010-part-threaded-boss",
|
||||
"ladder/06-threads/003-external-m10-partial-length",
|
||||
"ladder/06-threads/005-internal-m10-through",
|
||||
"ladder/06-threads/004-external-m10-to-shoulder",
|
||||
"ladder/06-threads/007-external-m10-at-filleted-shoulder",
|
||||
"ladder/06-threads/004-external-m10-to-shoulder",
|
||||
"ladder/06-threads/009-thread-runout-length",
|
||||
"ladder/06-threads/016-external-m10-left-hand",
|
||||
"ladder/06-threads/001-external-m10-full",
|
||||
"ladder/06-threads/006-external-m10-into-chamfer",
|
||||
"ladder/06-threads/002-external-m10x1-fine",
|
||||
"ladder/06-threads/008-multi-start-thread",
|
||||
"ladder/06-threads/009-thread-runout-length",
|
||||
"ladder/06-threads/011-external-tr20x4",
|
||||
"ladder/06-threads/012-external-acme-3-4-6",
|
||||
"ladder/06-threads/013-external-s20x4",
|
||||
"ladder/06-threads/014-external-buttress-asme-1.5-8",
|
||||
"ladder/06-threads/015-internal-tr20x4-nut",
|
||||
"ladder/06-threads/016-external-m10-left-hand",
|
||||
"ladder/06-threads/017-external-m10-chamfered-tip"
|
||||
],
|
||||
"tier": "06-threads",
|
||||
@@ -122,18 +122,18 @@
|
||||
{
|
||||
"cases": [
|
||||
"ladder/07-fillets/015-corner-g2-patch",
|
||||
"ladder/07-fillets/008-constant-r1e-3",
|
||||
"ladder/07-fillets/001-single-edge-r5",
|
||||
"ladder/07-fillets/006-variable-r5-to-zero",
|
||||
"ladder/07-fillets/011-chain-ending-at-corner",
|
||||
"ladder/07-fillets/005-variable-r5-to-r1",
|
||||
"ladder/07-fillets/004-convex-and-concave-r5",
|
||||
"ladder/07-fillets/009-corner-three-equal-r5",
|
||||
"ladder/07-fillets/008-constant-r1e-3",
|
||||
"ladder/07-fillets/002-four-vertical-edges-r5",
|
||||
"ladder/07-fillets/007-variable-r5-to-1e-3",
|
||||
"ladder/07-fillets/010-corner-unequal-r7-r3",
|
||||
"ladder/07-fillets/004-convex-and-concave-r5",
|
||||
"ladder/07-fillets/016-corner-three-sequential-r5-r3-r7",
|
||||
"ladder/07-fillets/012-variable-into-rounded-corner",
|
||||
"ladder/07-fillets/010-corner-unequal-r7-r3",
|
||||
"ladder/07-fillets/014-curved-edge-r2",
|
||||
"ladder/07-fillets/003-tangent-chain-r3",
|
||||
"ladder/07-fillets/017-part-rounds",
|
||||
@@ -144,11 +144,11 @@
|
||||
},
|
||||
{
|
||||
"cases": [
|
||||
"ladder/08-chamfers/003-distance-angle-5-30",
|
||||
"ladder/08-chamfers/002-two-distances-5-3",
|
||||
"ladder/08-chamfers/003-distance-angle-5-30",
|
||||
"ladder/08-chamfers/005-corner-two-mitred-3",
|
||||
"ladder/08-chamfers/004-corner-three-equal-3",
|
||||
"ladder/08-chamfers/001-equal-5",
|
||||
"ladder/08-chamfers/004-corner-three-equal-3",
|
||||
"ladder/08-chamfers/007-chamfer-then-fillets",
|
||||
"ladder/08-chamfers/006-curved-edge-2",
|
||||
"ladder/08-chamfers/008-part-chamfers"
|
||||
@@ -158,18 +158,18 @@
|
||||
},
|
||||
{
|
||||
"cases": [
|
||||
"ladder/09-shells-and-offsets/007-offset-top-face-5",
|
||||
"ladder/09-shells-and-offsets/012-closed-shell-sealed-void",
|
||||
"ladder/09-shells-and-offsets/001-box-open-top-t2",
|
||||
"ladder/09-shells-and-offsets/003-tube-two-open-faces",
|
||||
"ladder/09-shells-and-offsets/004-thin-wall-0.2",
|
||||
"ladder/09-shells-and-offsets/007-offset-top-face-5",
|
||||
"ladder/09-shells-and-offsets/001-box-open-top-t2",
|
||||
"ladder/09-shells-and-offsets/009-shell-outside-t2",
|
||||
"ladder/09-shells-and-offsets/008-offset-cylinder-wall-2",
|
||||
"ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2",
|
||||
"ladder/09-shells-and-offsets/002-cylinder-open-top-t1",
|
||||
"ladder/09-shells-and-offsets/005-shell-rounds-r5-t2",
|
||||
"ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled",
|
||||
"ladder/09-shells-and-offsets/010-shell-under-rounded-top",
|
||||
"ladder/09-shells-and-offsets/005-shell-rounds-r5-t2",
|
||||
"ladder/09-shells-and-offsets/013-dome-shelled-from-base",
|
||||
"ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back",
|
||||
"ladder/09-shells-and-offsets/011-part-shell"
|
||||
|
||||
Reference in New Issue
Block a user