* Sketch: an ellipse comes with its axes, and D measures its half-axes
An ellipse could only be sized by its minor radius, drawn like a circle's
radius, and there was no way to give its full axes. sketch.ellipse now also
adds the major and minor axes as construction lines through the centre.
The major axis runs from the major end to the point opposite it; the minor
one is perpendicular to it, ends on the ellipse, and both are bisected by
the centre. That adds six coordinates and six equations, so the ellipse
keeps its five degrees of freedom, and it needs no new constraint kind and
no format change.
With the axes in place every ellipse size is an ordinary dimension. D on an
axis line gives its length, the whole axis. D on the outline gives a half-
axis, the distance from the centre to an axis end, chosen the way a line
chooses horizontal or vertical but in the ellipse's own frame: text pulled
across the major axis measures along it (the major half-axis), text pulled
out past an end of it measures across it (the minor one). The end on the
text's side is used. Near the boundary between the two, a dimension being
placed keeps the half-axis it had (sketch.dimension's previous_axis, which
the Dimension tool sends), so the preview does not flip. A half-axis and
its whole axis determine each other, so the second becomes a driven
dimension through the existing redundancy path.
Deleting the ellipse leaves its axes, as deleting a Center Rectangle's
edges leaves its construction diagonals. Ellipses without axes, from
existing designs, keep the minor radius as before, and type radius still
gives it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Guide: an ellipse's axes and half-axis dimensions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test that an ellipse's half-axis preview keeps its axis near the boundary
The Dimension tool sends the half-axis its last preview chose, so near the
boundary between the major and the minor half-axis the preview keeps it.
This covers that path from the tool, from both sides of the boundary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's axes select and drag with it, as a rectangle's diagonals do
A double-click on a Center Rectangle's edge or diagonal selects its edges
and both diagonals, and dragging a diagonal moves the rectangle without
changing it, because its lines share corner points. An ellipse's axes are
held by constraints instead, so a double-click selected only the ellipse
(and Delete then left the axes behind), and dragging the major axis moved
the ellipse but stretched its minor half-axis.
Sketch::ellipse_axes now finds an ellipse's construction axes (the
detection sketch.dimension already used, moved into the sketch crate).
Sketch::chain treats an ellipse and its two axes as joined, so a
double-click on any of them selects all three. Dragging either axis moves
the ellipse and both axes as one, keeping both half-axes. Dragging the
outline still sets the minor half-axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a corner test reads its line's id instead of assuming l1
sketch.ellipse now adds two axis lines, which take the first line ids, so
the extend test reads the id of the line it draws from the reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's axes cut a trim, as a Center Rectangle's diagonals do
Trim, extend and break take every other curve as a cutter, construction
lines included, so an ellipse's construction axes stop them as a Center
Rectangle's diagonals do. A test now states it for both shapes, and the
guide says it. The freeform cutter test keeps the axes it used to delete
and asserts the piece a trim removes: from where the major axis crosses
the circle to where the ellipse does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test dragging an ellipse's outline with its axes present
Dragging the outline sets the minor half-axis, and the minor axis line,
held on the ellipse at one end, follows it; the centre and the major
half-axis stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: other dimension types on an ellipse with axes keep the minor radius
Only auto, major and minor give a half-axis on an ellipse drawn with its
axes. Any other type (radius, diameter, horizontal and the rest) gives
what it gives on an ellipse without axes, as the parameter doc says,
instead of quietly becoming a half-axis chosen by the text. The arm for
a missing text_at is dropped: with no text the rule already picks the
minor half-axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test an ellipse's half-axis dead zone from the major side too
The tests only showed a previous minor half-axis being kept near the
boundary; the point they used on the major side is major by geometry
alone. A point inside the band where geometry says minor now shows a
previous major half-axis kept, in the engine and in the Dimension
tool's preview.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a placed ellipse half-axis is the one its preview showed
On an ellipse already sized, a half-axis is added as a driven dimension
on the click, and that command left out the half-axis the preview kept
near the boundary, so the click could place the other one. It now
passes it as the preview does.
The remembered half-axis also comes only from a draft whose text was
placed (one without text is the minor half-axis by default and biased
the first placement), is kept per sketch as well as per picks, and is
forgotten once a dimension is placed or the picks are cleared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: say how an ellipse's axes are recognised and what that costs
The axes are read from the constraints, with no mark in the design, so
the doc comment says which lines count, that deleting the midpoint or
point-on-curve constraint leaves an ellipse without axes, and that each
lookup scans curves times constraints.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse with one axis deleted still picks its half-axis by the text
With one construction axis deleted, D on the ellipse fell back to the minor radius wherever the
text was pulled, because the half-axis choice needed both axes. It now reads what is left of
them and chooses as before: the major half-axis goes to the major end (also from the far side,
when the point opposite is gone with its line), the minor one to its axis end, or as the minor
radius when the minor axis is the one deleted. An ellipse with neither axis keeps the minor
radius.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the one-axis half-axis test checks what is measured to
The test for an ellipse with one axis deleted checked only the reply's axis and value, which
both ends of an axis give alike. It now checks the dimension's kind and end: the axis end on
the text's side, the major end from either side once the point opposite is gone, a radius once
the minor axis is. With the major axis deleted and no text the reply names the minor axis and
measures to its end, where it used to be a radius with no axis named.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's minor radius is drawn as its half-axis, without R
A radius on an ellipse is the minor half-axis, and it was drawn as a circle's radius: one
leader from the centre towards the text, marked R, which measures nothing a reader can see.
It is now drawn as the distance from the centre to the minor axis end on the text's side,
the way the half-axis is drawn while the ellipse has its axes, and labelled with the length
alone. This is what D gives once the minor axis line is deleted, and on an ellipse with no
axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's half-axis keeps a radius's stored text
The half-axis frame read the stored text from the middle of the half-axis, so a radius placed
on an ellipse in an existing design would show its text somewhere else. The text is stored from
the centre again, as a radius's always was, and the side drawn to follows it. An unplaced one
sits where a linear dimension to the minor axis end puts its text, and stacked texts step out
from the centre as a radius's do. A view test reads the painted label, so the drawing cannot
go back to R unnoticed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse moved, turned or scaled takes its axes along
Move, Sketch Transform and Scale moved only the curves picked, so an ellipse moved without its
axes left them where they were: its centre no longer halved them, the minor end left the
ellipse, and the sketch stayed unsolved. A Center Rectangle's diagonals share its corners and
always go along; an ellipse's axes share only the major end. The axes now go with the ellipse,
as they do when it is dragged. Copy is unchanged: it copies no constraints, for a rectangle
either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a preference draws ellipses without their axes, as before
Drawing an ellipse with its construction axes changes what the Ellipse tool makes out of the
box, so the old ellipse stays one setting away: Preferences › Sketch › Draw ellipses with their
axes, on by default. Off, the tool draws the ellipse alone. sketch.ellipse takes axes: false
for the same, and keeps drawing the axes when it is not given.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: sketch.ellipse refuses an axes value that is not true or false
A string such as "false" was read as not given, so the axes were drawn; it is now refused as
the text commands refuse a non-boolean bold or italic. The move test also covers an ellipse
whose minor axis was deleted: the major axis left goes along.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: D picks a half-axis on an ellipse without axes too
An ellipse with no axis lines (both deleted, a mirrored copy, one from an older design) gave the
minor radius wherever the text was pulled, so its major half-axis could not be dimensioned on
it. The half-axis is now chosen by where the text is on every ellipse: the major one to the
ellipse's own major end, the minor one as its minor radius. With no text it is the minor
radius, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: with one half-axis dimensioned, D on the ellipse gives the other
D on an ellipse chose the half-axis by where the text was pulled even when that half-axis was
already held by a dimension, so the second D usually guessed the one already there and was
refused as over-constrained. With a driving dimension already on one half-axis (to an axis
end, the minor radius, or the whole axis along its line or between its ends), D with no type
now gives the other, in either order and with or without the axis lines. With both held it
chooses as before; an explicit major or minor is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the held half-axis rule is documented and its cases tested
The Dimension command's parameters and the guide now say that with one half-axis held, D on
the ellipse gives the other. Tests cover the whole axis held as a distance between its ends
and as its line's length with the other axis deleted, and check that a mirrored ellipse has
no axes. The placement test undoes its first dimension, so its second half still tests where
the text is rather than the held half-axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Transform previews an ellipse with its axes
OK in Sketch Transform moves, turns and scales an ellipse's axes with it, but the window drew
where OK would leave only the picked curves, so the axes stayed put in the preview until OK. An
ellipse picked alone is now drawn with the axis lines it has.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the typed-radius ellipse test counts the ellipse's axes
Main's #10282 test drew an ellipse with typed radii and expected one curve; with the
ellipse_axes preference on by default the tool also draws the two axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's remaining axis still drags and selects it
With one axis deleted, dragging the other axis did not hold the ellipse (with the minor axis
left, the drag squashed it), and a double-click on the ellipse or that axis selected only the
one curve. The drag and Sketch::chain now read whichever axes are left through
ellipse_axis_lines, as Transform and Move already do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: drop the unreachable third arm of the held half-axis check
A distance from the centre to the major end or the point opposite it is already matched by the first arm, so the third arm and its major_end closure never ran.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: D on an ellipse's axis line is the whole axis wherever the value is pulled
An axis line took the free line's rule, so on a turned ellipse a value pulled beside or above the box the axis spans gave its horizontal or vertical distance. An ellipse's axis is a construction axis, so auto now always gives its length, which the held half-axis check already counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's axis is never a side of a Fillet or Chamfer corner
A line drawn from an ellipse's major end shares that point with the major axis, so Fillet or Chamfer there took the two as a corner (two lines skip the construction filter) and rounded the line into the axis. The axes are left out of a corner, picked by its point or as a and b.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test the move reply, extend and the one-axis Transform preview for ellipse axes
The reply of sketch.move, sketch.transform and sketch.scale lists the axis lines, Extend stops at an axis, and Sketch Transform previews an ellipse with the one axis left after the other was deleted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: with Draw ellipses with their axes off, D on an ellipse is its minor radius as before
The preference brought back the old drawing only; D on an ellipse had changed with no way back. sketch.dimension takes half_axes (default true, refused when not true or false); false makes auto on an ellipse the minor radius wherever the text is. The Dimension tool and the context menu's Sketch Dimension pass it from the preference, and with it off a radius on an ellipse is drawn and labelled R as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: read an ellipse's axes in one pass over the constraints
ellipse_axis_lines scanned every constraint for every curve, so 500 ellipses with their axes (1500 curves, 2000 constraints) took 1.6 s to read and Move on all of them 2.0 s. It now collects the lines the centre bisects first: 3 ms and 0.36 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the dimension and corner parameters say how an ellipse's axis lines take part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: Draw ellipses with their axes says D gives the minor radius when off
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: ask only the ellipses centred on a line's midpoint whether it is their axis
is_ellipse_axis read every ellipse's axes to answer for one line. An axis is bisected by its ellipse's centre, so it now asks only the ellipses centred on a point that bisects the line. The answer is the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a horizontal or vertical dimension across a level major axis holds it for D on the ellipse
half_axes_held counted a distance, a length and a radius, but not a horizontal or vertical dimension across the major axis, which is its length when the axis lies that way. D on the outline could then take the held major half-axis and be refused as determined; it now gives the minor one. Across a slanted axis such a dimension is only a projection and does not count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: a draft on an ellipse is drawn with the axes preference it was made with
The frame read the preference as it is now, while the dimension added is the draft's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a horizontal or vertical dimension across an upright minor axis holds it too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: drop the unused Sketch::ellipse_axes; ellipse_axis_lines says how the axes are read
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's own axes do not cut it, so Trim takes a lone ellipse whole and stops at real crossings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Fillet and Chamfer offer no corner at an ellipse's axis end, as the engine takes none
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a deleted ellipse leaves its centre on its axes, as a Center Rectangle's centre stays
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: ellipse axis docs say what they do, and the corner picker tests a curve's ends before its axis role
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the trim-at-a-crossing test checks that part of the ellipse is left
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse axis moved, turned or scaled on its own takes its ellipse along, as a drag does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a selection dragged by an ellipse axis takes the ellipse along, as the axis alone does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the Sketch preferences page lists Draw ellipses with their axes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the ellipse axes help text says D gives the minor radius, drawn and labelled R as before, wherever the value is pulled
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With a profile or face picked, clicking a face, vertex or parallel plane that is
not in the profile's plane now sets Extrude to To Object, not one more profile.
Clicking into the Profiles box first makes the next picks profiles again.
Preference extrude_auto_to_object (Tools) turns it off.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Redesign General preferences
* Update Preferences regression fixtures and gallery coverage
* Keep measured Preferences faces out of neutral exclusions
* Keep the profile name entry in Preferences search results
The redesigned Profiles section had no search-visible control, so a query
such as "profiles" dropped the whole section and the name field could not
be reached with a search active. Report the entry row as a hit so the
section stays on the results page, and point the typing-focus regression
test at the redesigned "Profile name" field and "Save as new" button. It
still checks that typed profile names stay out of the search box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* ui_kit: search_picker, a filtered dropdown with a custom entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: endpoints list their models with names, say when listing fails, and OpenClaw and OpenRouter presets (#2582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: a typed model goes to endpoints and to agents that offer a model option
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the header's model pickers search and take a custom model
The popup can't grow once it is open, so search_picker now fixes the height of what changes below
its box when it opens: the custom row or a late list could otherwise end up out of reach.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AI preferences: pick an endpoint's model when adding it and on its card (#2582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: model picker rows read from the left, and a refused typed model says which
From running it: list_picker centres its text, which reads badly for a long list of ids, and an
agent's own refusal can say no more than "Internal error". The search box also asks for a repaint
while it waits for the focus, so an idle window does not stop short of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: docs for the model picker
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: an endpoint's answer that is no model list says so, an empty list too, and editing lists with the kept key
A 200 without a `data` array (a web page where the endpoint should be, as OpenClaw's gateway
serves until its chat endpoint is enabled) was cached as a successful, empty listing, so the
picker stayed blank with nothing to say and never asked again. Now it is an error with its own
note, an empty list says so, and both are asked for again the next time.
The Edit dialog lists its endpoint's models when it opens, with the kept key read from the
keychain on the listing's thread, as the card does; the key stays out of the field.
The method-not-found test expects the refusal notice that names the model, as every refused
model gets since this branch.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: models from several providers fold under their providers inside the picker
As Chemiseblanc does in #10187: with two or more groups, `search_picker` draws each group as a
header with a chevron, the name and how many of its choices are listed, and a click folds or opens
it. Before anything is typed only the current value's group (and the one the caller asks for) is
open; a group with a match opens once something is typed; a fold made by hand stays until the popup
closes. Enter takes the first row shown, so never one folded away. A lone group keeps its plain
heading.
The header's model picker feeds its providers in as groups, so the separate provider drop-down
goes; the control channel's `provider` now says which group opens first. A header click gives the
focus back to the search box, so typing goes on filtering.
The dialog's listing test checks what kind of listing it got rather than translated words, which
the listing thread may render in another language than the test's.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: rustfmt the provider groups
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: an endpoint's models named `Vendor: Model` fold under their vendors
OpenRouter lists `openai/gpt-6.1-terra` as "OpenAI: GPT-6.1 Terra". A listing whose ids read
`vendor/model` and whose names read `Vendor: Model` now names its providers, so the picker folds
it under its vendors like a multi-provider agent; the rows read the model's name, and the id stays
in the tooltip and in the search. An agent's own `Provider: …` word still comes first. One vendor
is one flat list, as before.
The Add dialog's picker has no current model to prefer, so with nothing to prefer every group
starts open; folding is a click away.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9873
* Add the Preferences design reference: pages, figures, measurements, tokens
* Fix the selection look in the design reference to match the app
* claim: #9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the system note reaches agents beyond the Claude adapter
The note only went out as `_meta.systemPrompt.append`, an extension of the
Claude adapter, so Codex and Antigravity never saw it. It now also goes in
the standard ACP `systemPrompt` field for agents that offer it, and in
`_meta.antigravity.systemPrompt.append` for Antigravity.
Fixes#9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9293
* Assistant: a sign-in confirmed in one tab holds in every tab (#9293)
The latest sign-in evidence per agent is window state: keep it across
tab switches, new tabs and replaced designs instead of resetting it with
the tab's conversation, so a new tab no longer marks the agent as signed
out when discovery's login probe is older than the chat's proof.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3305
* fix(agent-chat): support ACP configuration options (#3305)
Handle current select options for model, thinking effort and mode, with confirmed snapshots and legacy compatibility. Full quality gate attempted; draft delivery authorized with unrelated geometry/property/timing failures documented in PR #3867.
* fix(agent-chat): keep configuration selectors inline (#3305)
Use compact value pickers and bounded wrapping to preserve conversation space; verified at normal and narrow widths with the installed OpenCode V2 server.
* style(agent-chat): format tool events
* Persistent naming: a proposal from a second implementation
A design proposal for the persistent-naming failures still open (#4341,
#5198, #5308, #5857, #5858, #5860, #5861), from building persistent naming
in Form Studio: fall back by lineage, never by geometry alone; a suppressed
maker is not a lost reference; names saved as structured one-level values;
ordinals from the feature, not the kernel's face order; split picks resolve
to all pieces; body identity apart from the display name. Documentation
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming proposal: body identity follows the #5308 plan
Change 6 now agrees with bluecmd's plan on #5308: an id minted from
next_id and stored per feature slot, better than the derived identity
the first version proposed. It adds that a stored id is only as stable
as the slot assignment, which today follows each lump's least face
name, and gives the lineage signature from the #5308 discussion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5439
* Agent chat: each design tab keeps its own conversation (#5439)
* Adapt chat-per-tab changes to the new Pending context and cursor tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5015
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Assistant: add Anthropic-compatible API agents (#5015)
The Add agent wizard now offers Anthropic-compatible endpoints beside OpenAI-compatible ones. The API backend speaks the Anthropic Messages protocol with the same MCP bridge, tool gate, limits, undo and keychain rules: x-api-key and anthropic-version, a top-level system note, input_schema tools, content-block answers and one user tool_result message per round. Test sends a short message because compatible endpoints (Qwen's) need not list models.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
* docs: ribbon UX redesign proposal (mockups and notes)
Seven mockup images and a short description of the proposed ribbon shell, with floating and
compact layout options. Pictures only; no app changes. The sketch variant with tab locks is
left out.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: update the UX mockups to the current command set
Adds the Sketch Pattern panel, Perforate, new joints and motion commands, Fair and Match Surface,
and the Render workspace; the workspace switcher now matches the app (Design and Render available,
Animation, Simulation, Manufacture and Drawing later). Command map covers all 389 commands.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: draw the UX mockups with the reviewed icon SVGs and accents
Ribbon, browser, history and navigation icons now come from the icon system in #853, with the
Sketch tab in the Sketch green and constraints in red.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: address review on the UX proposal README
Describe the current toolbar in our own terms, and list only Design and Render as the workspaces in
scope.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Grok Build is added as one more entry in the agent discovery list, over ACP, like the others. Thanks @cfaulkingham.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Agent chat prototype: drive an ACP agent the user already has from a side panel
A desktop-only chat panel (off by default) that starts a coding agent over the
Agent Client Protocol and gives it SolidCraft's MCP server, bridged to the open
window through the token-protected control channel with the default folder
limits. It finds installed agents (Claude Code and Codex adapters, Gemini CLI,
Copilot, Qwen, OpenCode, goose) with version and login state, streams text,
tool calls and plans, shows the agent's permission requests, and when an agent
isn't signed in shows its own login methods without handling any credential.
Design notes and findings: docs/design/in-app-agent-chat.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: say only what the end-to-end run showed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: gate, one undo per message, docking, process groups, discovery polish
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Settings → AI, several agents with a switcher, OpenAI-compatible endpoints, permission modes, toolbar button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: translations, tool cards, Add agent dialog fixes, test agent saves on its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: third-party licences for the keychain crates; clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: badge text from the theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Auto-allow model edits is the default permission mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
PaddleStroke