* ci: repair local nextest scheduling and Windows fixtures
* test: refresh MSVC robustness references and isolate GNU policy
Integrate the Windows reference records from #3361 and the target-environment
selection and recording policy from #4159. Keep shared records and comparison
tolerances intact, and retain seed 36 as an existing failure tracked by #3583.
Co-authored-by: Ray <raykholo@users.noreply.github.com>
Co-authored-by: chris <christopher.nourse@gmail.com>
* test: make CI subprocess and revolve fixtures deterministic
---------
Co-authored-by: Ray <raykholo@users.noreply.github.com>
Co-authored-by: chris <christopher.nourse@gmail.com>
The retries in boolean_whole_inner mesh every candidate to compare its
volume. A nudged union at the coarse tolerance could come out with a face
on a cone whose trim loop ran metres along the cone's continuation (edges
up to 12.7 m outside a 155 mm part); meshing it took seconds to minutes per
face and once never finished, though its volume (+-1e10 mm3) failed the
check anyway.
check() first samples the candidate's edges (16 per edge) and discards a
candidate with a point further outside the operands' mesh box than 5% of
their size (or a non-finite point): no edge of a union, cut or
intersection can lie there. The reason goes into the new
BooleanDiagnostics::rejected (omitted from JSON when empty). Results of
sound candidates are unchanged.
On the reporting design the PitchTail join drops from 18.7 s to 4.3 s with
the same result; the regression tests synthesize a cone face whose loop
runs off its surface.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
- Pull requests that can change a robustness golden check every seed but the 17 slowest, in the
same nextest run as the other tests instead of a second step after it (16-30 minutes on its own).
The slow seeds (about four fifths of the goldens' time) still run in the merge queue, on main and
nightly. A failed golden still prints how to re-record it, and junit.xml now holds the whole run.
- The slowest tests start first (nextest priority), so a shard no longer ends with one of them
running alone.
- tspline::tests::hostile_tsplines_never_panic joins the heavy tests pull requests skip (up to
12 minutes on a GitHub runner; the same kind of check as hostile_params_never_panic).
- The ci profile builds dependencies without line tables: the test archive pull requests' shards
download goes from 3.4 GB to 2.2 GB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boolean nudge tried both ways: no sliver where a cut's end touches a round side (#897, #827)
Robustness seed 14 cuts a cylinder whose end lies exactly on the apex of the
plate's arc side. Since the display tessellation plans (#805) the generator sees
the arc's true extent, so the cut's base lands on -10 instead of -10.000000000000002
and the end is tangent to the arc. The direct boolean fails there and the
last-resort tool nudge pushed the end into the arc, leaving a planar sliver a
tenth of a millimetre wide; shell then picked that sliver and refused it. The
13 October merges were not the cause (the bisect lands on #805).
The nudge is now tried both ways and the simpler result (fewer faces) is kept,
so the opposite nudge parts the touching faces instead. The same change joins
the hinge barrel in #827, whose top lies tangent to the lid's underside where
the mounting leaf ends. Each result still passes the same checks as before.
Goldens: seeds 14, 26 and 85 now build to the end, 31 and 78 come out with
fewer faces. Seeds 6, 43 and 73 still stop at shell: their joins now succeed and
shell reaches corners it can't offset (a cusp where a box face touches an arc,
coplanar faces facing opposite ways), which is unchanged.
Fixes#897Fixes#827
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Nudge the other way only when the first nudge fails or leaves a sliver
Trying both nudges and keeping the one with fewer faces could prefer a result
that keeps two pieces joined by a hair over one that separates them (the
centred coplanar revolve cut). The opposite nudge now runs only when the first
one failed or left a face narrower than 1/200 of the part, and it is taken
when it works with fewer of those.
Goldens re-recorded on current main: seeds 14, 26 and 85 build to the end,
31 and 78 with fewer faces. The other changed seeds are main's own since its
last full record, identical with and without this change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Nudge the other way only for slivers the nudge made
On the sensor enclosure's lid the first nudge left thin faces the operands
already had (thin walls, small rounds), so the opposite nudge ran a second
boolean for nothing and the press/pull took 79 s against main's 55 s. The
opposite nudge now runs only when the first one failed or left more slivers
than the operands brought; the press/pull test takes 36 s against 42 s on main
(same machine, one after the other).
Goldens re-recorded on top of #940.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Goldens on current main: seeds 31, 43 and 78 with the two-way nudge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the hinge and tangent-cut tests beside the #871 fillet test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Goldens: seeds 33 and 91 as main's fillet changes build them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Goldens: keep main's #950 record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
tests/robustness/goldens.json records what each of seeds 0-95 builds: its steps, how it ended (ok, or the kind and the start of the error it was refused with) and, for the design it left, the bodies' total volume and area (within a relative 1e-6) and their face, edge and shell counts. tests::robustness_goldens fails on any change; ROBUSTNESS_GOLDENS_BLESS="why" records one, with the reason and the seeds it moved. Pull requests that touch crates/kernel run every 8th seed; pushes to main and the nightly run every seed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A coincident face is pushed apart only when the space it moves through holds nothing that changes the result; otherwise the boolean falls through to the exact strategies.
Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The oracle no longer uses Fusion measurements. tests/oracle/<case>/ now holds the 76 recipes
(our own format, with recorded measurements and tool-specific fields removed) and an
expected.json per case:
- 55 analytic cases: closed-form values from tools/oracle-analytic/ (stdlib Python, formulas
in each case's "method").
- 21 FreeCAD cases: the same recipe built with FreeCAD's public scripting API by
tools/freecad-oracle/ (an external program, not a dependency), with a reference.stl for 20.
solvecraft-cli oracle compares body count, volume, area, centre of mass, bbox, face counts
where the geometry fixes them, and, against reference.stl, the sampled Hausdorff distance and
the principal moments (spatial.rs from #301). cargo xtask oracle reads tests/oracle, writes
docs/oracle.md with the source of each value, and supports known_failure marks for tracked
bugs. CI runs it on every PR; a manual workflow regenerates the FreeCAD values. step-corpus,
seam normalisation and the through-all emulation, which only existed to compare with Fusion,
are removed.
75/76 pass; 75-sm-bracket-holes is a known failure (#296).
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: bherbruck <bherbruck@herbrucks.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
jyviko