* claim: #2089 (3MF production extension: review follow-ups)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3MF import: production extension review follow-ups (#2089)
Follow-ups from the review of #2127:
- Only the root model's build is read; other parts' build sections are
ignored as the spec asks (a slicer's child build pointing at a thumbnail
no longer matters).
- A model part that can't be read fails only the placements that need it;
the package-wide caps (part names, 1 GB of model XML) still refuse the
package. The root XML is dropped once parsed and each part is read
against the remaining budget.
- Loops are reported apart from depth, keyed by (part, object).
- Messages name parts as written; objects are kept in id order so parts are
read in the same order every run; %XX escapes in part names are decoded;
the model unit is a local of the parser.
- Tests: a component without p:path stays in its part (T1), the same id in
two parts is no loop (T2), a slicer-shaped project (T3), the placement
budget across parts (T4), a loop through three parts and a chain past the
depth cap (T5), broken parts and child builds (T6), escaped names; the
hostile-parts test asserts its messages; the mutation test also mutates
the parts' XML and zips it again.
- Guide: what slicer-only data is not read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3353
* Sheet metal: mirrored and copied sheet bodies stay sheet metal
Mirroring a sheet metal body into a new body gave a plain solid: the
opposite-hand bracket had no flat pattern, DXF or bend table
("`Body1 (2)` is not a sheet metal body"). Copies from a body pattern or
Move with copy lost their sheet model the same way.
A copy now takes the sheet model with it (SheetBody::copied). A rigid
copy moves the flat frame. A mirror moves the frame with its x axis
turned round, so the thickness side stays, and mirrors everything in
flat coordinates (x -> -x): base, flange bend lines (run from their far
end, with their end extensions, slopes and tears swapped), panel shapes,
cut-outs, pockets, bores, letters and base sketch lines. Arcs stay exact
and loops keep their sense. A perforation field of a mirrored copy runs
its grid from the right, so its holes are the mirror image too. The flat
length, bends and K-factor are unchanged, and the copy takes further
sheet metal features of its own.
Mirror with combine is unchanged: the joined body has no single sheet
model yet. Mirroring or patterning flange features is still refused.
Sheet models are derived from the timeline, so no design format change.
* Format: note the saved from_right of a mirrored sheet's perforation field
The new `from_right` flag is saved in the design, so it gets a pending
format note. No migration: a field without it runs from the left as
before.
* CI: give the slowest tests a shard each
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: spread the slow tests on pull requests too, and keep both junit files
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: pull requests skip the goldens and the action matrix sample unless the kernel changes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: which pull requests run the goldens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: run the tests in one job on a big runner, slowest first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: allow the 32 vCPU runner label in actionlint, read junit.xml in the golden hint
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix recovery for unsaved background tabs (#2884)
* Recovery: scheduled autosaves of every tab write on the worker thread (#2884)
After #3139, Autosaver::save waits for the write and Autosaver::tick runs
it on a worker. The scheduled path now goes through tick (which skips a
tab whose previous write is still running), so several dirty tabs no
longer write on the window thread each interval (#3044). save stays for
Save, close and shutdown. Each tab's autosaver has no clock of its own:
the shared cadence decides when it is due. The tests wait for the
writes a tick started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recovery: closing a tab waits for its running autosave before removing the entry (#2884)
With the autosave on a worker thread, discard could remove the files and
the lock while a write was still running; the write then recreated the
entry without a lock, and the next launch offered a design closed with
Don't Save. discard now ends the running write first, as Drop does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens
* ui: per-tab accent behaviour and a larger application bar with a Start page button
* icons: silhouette master and flat assistant and agent link icons (open for review)
* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)
* icons: wire the silhouette master to inspect.silhouette; record the accepted icons
* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers
* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins
* ui: ribbon painting to the compact design
* ui: smaller icon button highlight and assistant mark on the bubble corner
* ui: short ribbon labels that wrap at spaces
* ui: ribbon buttons fit their labels and Finish Sketch shows its full name
* ui: constraint gallery, workspace menu, section list headings and richer tooltips
* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design
* ui: document tabs as rounded chips with a dimmer inactive label
* ui: document tabs fit their names and show close only when active or hovered
* icons: close and plus masters for the document tabs (open for review)
* ui: centre the new-tab plus and overflow button on the bar
* ui: a quiet rule under the ribbon tabs on non-contextual tabs
* ui: the application bar mark separates its faces with the bar colour, not white
* ui: open ribbon section label uses the selected tint and a chevron
* ui: dim the tab close and plus icons until hovered
* ui: every ribbon dropdown uses the chevron, the workspace card included
* ui: the active document tab uses the design's surface colour
* ui: the bug button's right padding mirrors its icon side
* ui: square constraint cells and a rule before the grid
* ui: constraint cells back to their earlier size, keeping the rule
* ui: smaller constraint cells and icons, centred in the section
* ui: constraint cells fit the height of the large buttons' icon and label
* ui: sketch Create titles share the other labels' line
* ui: format the application bar and ribbon changes
* ui: active tab surface token and the colour and hover tests that follow the redesign
* tests: the merged parameter and narrow toolbar tests follow the compact ribbon
* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations
* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS.
* claim: #3249
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* inspect.interference/clearance: list mesh bodies as unchecked
Mesh bodies (STL, 3MF and OBJ imports) were filtered out before any pair
was formed, so two overlapping STL imports reported count 0 and an empty
unchecked list, which reads as "no collision". Each mesh body is now
listed in `unchecked` as {a: name, b: null, reason: "mesh body: not
checked"} by both commands. inspect.clearance also stops refusing a mesh
body named in `bodies` or `against` as "no solid body"; it is listed
instead. The parameter docs and the assemblies guide say so.
Fixes#3249
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: separate the mesh-body note from the paragraph above
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
While editing a dimension's value, a single click on another driving
dimension now inserts its parameter name (a double-click no longer needed,
and its second click does not insert it twice). A lone value such as `10`
or `10 mm` is replaced by the name; an expression in progress keeps what
was typed and gets the name at the cursor (replacing selected text), so
`10 + ` becomes `10 + d10`. The cursor ends after the name and the field
keeps the keyboard.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.
With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Mouse gestures: a ring of tools on the right button, per studio and customizable
Preferences > Navigation gets a Mouse gestures switch and a Customize window (number of
tools and their place, per studio). Gestures need the SolidWorks mouse mode and turn the
right-drag orbit off. The ring is 280/350 pt, one zone per tool, alternating tints (three
when the count is odd). The radial context menu is unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
* Mouse gestures: the ring opens on the right-button press; the right-click menus are off while gestures are on
The ring opens at once on the press, even while a tool or dialog is active. While gestures are
active the viewport's right-click context menu, the right-click that finishes a tool and the
radial context menu no longer fire. With gestures off nothing changes.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
* Mouse gestures: the ring opens after 4 px with the right button held; a plain right-click keeps its menu
The ring no longer opens on the press. It opens where the button went down once
the pointer has moved 4 points with the button held, even while a tool is in
progress. A right-click that does not move opens the usual context menu (or
finishes the tool) again; the release that ends a gesture opens no menu. The
radial menu stays off while gestures are active.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
* Re-trigger CI (the run was cancelled when approved-for-ci was added)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #3324
* Sheet metal: refuse a flat pattern that no longer matches the body
A feature that is not sheet metal can change a sheet body's material
without its sheet model knowing: a mirror combined into it, an extrude
joined onto it, a fillet or chamfer on a corner. The flat pattern, the
DXF and the bend table then wrote the sheet as it was before, a part
other than the one in the design, with no warning.
The evaluator now notes, per sheet, the first such feature: one that
changes the body's shape while its sheet model stays the same. That
feature warns, and sheet.flat_pattern, sheet.export_dxf (also with
per_body) and sheet.export_bend_table refuse with "not supported yet",
naming it. A sheet metal feature, or machining the sheet keeps as
cut-outs, rebuilds the body from the model: it clears the note and
warns that the change is not kept. Moving the body, splitting its faces
and cosmetic threads leave the flat pattern as it is.
* Sheet metal: a modelled thread is refused in the flat pattern too
Only a cosmetic thread leaves a sheet body's material as it is. A
modelled thread cuts the thread profile into the hole, which the flat
pattern does not have, and a later sheet metal feature dropped it
without a word. It now marks the sheet like a fillet does: it warns,
the flat pattern, DXF and bend table refuse naming it, and the feature
that rebuilds the body says the thread is not kept.
The two reliefs that would overlap are still resolved one after the other: the
second one is left out, with a note. The corners come out in flange-index
order, so which of the two keeps its relief depends on the order the flanges
were made in.
Two corners that share an edge never come this far: each relief reaches
exactly r along that edge, and a relief is refused unless 2r fits in it. Two
corners that do not share one can: the square relief at a corner of 120°
reaches 2r from it along the bisector, so at the two 120° corners opposite
each other in a rhombus the two reach each other.
Two reliefs that would overlap are now left out together, each with a note
naming the other, so that which of them is cut does not depend on the order
the flanges were made in.
Fixes#3417.
Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com>
Co-authored-by: Claude Code <noreply@anthropic.com>
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).
Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal: a corner relief no longer depends on the order the corners are cut in
The corner reliefs are planned against the base as it is before any of them is
cut, and the two reliefs at the ends of one edge are compared with each
other. Before, every relief was cut into the base as it went, so the corner
after it saw the relief of the corner before it: the square relief reaches
further from its corner than the round one does (4 / cos(α / 2) against 4), so
on a short edge it was left out where the round one was cut, and which of the
two corners kept its relief depended on the order the flanges were made in.
The reliefs themselves are unchanged: a round about the corner through the
angle the base fills there, or the square with that side (a kite where the
corner is not square, its cuts square to the two edges). What is new is that
they are planned first and cut together, so that a corner's relief depends on
the base and on the other reliefs, and not on the order they are cut in. Two
reliefs that would overlap are still refused, now with a note that says so.
Covered: the four relief shapes at corners of 60° and 120°, with the flanges
of equal and of unequal height, through the kernel and through the engine
(where the flat pattern and the DXF keep one clean loop).
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sheet metal: cover the corner reliefs at a corner that is not square
The engine and the UI had no test at all for a base whose corners are 60° and
120°: the flat pattern, the DXF, the unfold and the rule manager's own square
relief were all untested there. They work; this says so.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sheet metal: say what happens when a corner relief is left out
The guide now says that the reliefs at the corners of one edge are cut
together, and that two of them that would overlap leave the second one out.
A relief that cannot be cut is reported, not dropped.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sheet metal: write the corner relief's expected corners out
The engine test hard-coded the corners of the trimmed base; it works them out
instead, and the numbers the test and the sketch share are written with the
precision they need.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com>
Co-authored-by: Claude Code <noreply@anthropic.com>
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section
A headless picture dropped a body's opacity: the scene carried only a colour, so a design with
a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and
in a design's thumbnail, although the window has always drawn it as glass. There was then no
way to look at the body a cut would remove inside the material it meets: only a volume to
measure and reason about, which hides exactly the errors a picture makes obvious (a tool that
stops short, or lands in the wrong place).
- `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design
(`model_body_opacity`), and a selected body stays solid so the selection colour reads.
- The GPU capture routes a see-through body into the scene's glass at its own alpha, as the
viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer),
then the see-through ones blended over them, far sides before near sides and without writing
depth, so what lies inside shows and a line between the two is not hidden.
- `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool
colour, the rest see-through) and `--section z=27` run the commands the app itself runs
(`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Tests: measure the tool colour as it is drawn through a see-through target
The tool-colour filter was derived on paper and demanded a red more than twice either other
channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity
0.3); and the colour check painted the tool, which a solid target hides.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fmt
* Snapshot options: strip the colour's # rather than slicing it; README
Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write,
even where a length check has already made it safe. The error a failed assignment reports now
names the body rather than claiming it came from --body, since --tool reaches it too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* --tool: assign the bodies around the tool in groups, not one command at a time
Each appearance.assign is an undo step with a document snapshot behind it, so one per body
made --tool cost grow with the size of the design for no reason: the bodies around the tool
all get the same opacity, and the ones that share a colour can be named in one call. A design
whose bodies all wear the default grey now costs two commands whatever its size.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Rasterizer: say where its glass and the GPU's differ
Splitting each see-through body by facing orders its own two layers; it does not sort across
bodies, which the GPU does. Worth stating rather than leaving a reader to find it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Bill of materials: part properties on components and assembly.bom
A component definition now carries part properties (part number,
description, revision, other tools' keys) and free text properties,
saved with the component and shared by its occurrences.
component.metadata and component.metadata.set read and change them in
one undo step; Paste New copies them; parts.insert numbers standard
parts from their standard and size, and parts.resize renumbers them.
assembly.bom counts the placed components (flat: parts at any depth
through their subassemblies; top: direct children), grouped by part
number or by definition, sorted by part number, and writes CSV (fixed,
quoted columns) or JSON. The app gets a Bill of Materials window on the
INSPECT panel that lists, edits and exports the rows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: name a merged row's equal definitions once
Two standard parts with the same size are separate definitions with the
same name; their row now reads "SHCS M6x20" instead of repeating it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Window widths test: close the Bill of Materials window between commands
The test closes the floating windows a command opens before starting
the next one; the Bill of Materials window was left open and measured
against the next dialogs' limits.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: sub-parts in their part's row, and part properties without re-evaluating
assembly.bom takes group_children: true. A part with a part number keeps
what is placed inside it (a bolt's washer and nut) in its own row, listed
under it as children (items 1.1, 1.2, with each and count) instead of rows
of their own; bolts with different contents stay different rows, and
total_occurrences is the same either way. The window has a switch for it
and shows the children under their part; the CSV lists them after their row.
Changing part properties re-evaluated the model, re-seated every joint and
rebuilt the placed model: 361 ms per change with 30 jointed bolts. A change
that only touches components' metadata and properties now takes the same
path as a render-only change (proved on the whole Document), also for its
undo and redo: 0.6 ms.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Bill of materials: look the structure up once, not per subassembly
Deciding whether a subassembly is a part (it has bodies of its own) scanned
every body of the model for each subassembly, and each body looked up its
feature by a linear search of the timeline: subassemblies × bodies × features.
assembly.bom now indexes the placements, the body owners
(Document::body_owners: one pass over the bodies with the timeline in a map,
the same rule as model_body_component) and the numbered components once per
call. 600 bodies and features with 60 subassemblies: 8.1 ms → 1.3 ms; the
old cost grows with the cube of the design's size.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Centralise tool modifiers with classic defaults and preview-safe Ctrl.
Route sketch/selection chords through a shared resolver. Keep Alt snap
suppress and dual toggle as defaults; optional Shift add-only and Ctrl
snap mapping. Skip preview rollback while a manipulator drag is active.
* Address #1616 review: classic snap suppress, single viewport owner, docs.
Default suppress to Ctrl/Cmd or Alt; drop navigation set_suppressed; remove unused label_key; add preview rollback gate test; document sketch modifiers.
* fix(#1616): correct Modifiers primary in tests; simplify rollback fixture.
* Treat Ctrl as primary off macOS, and rustfmt the modifier files.
* claim: #2424
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Sketch Offset: constrain to the ends of an offset spline (#2424)
An associated offset spline hid all of its generated fit nodes, its two
end points included, so nothing snapped to them, and a curve drawn from
one shared the node and was refused ("invalid offset output point roles").
- An open offset's end points are shown and snapped to again; its
interior fit nodes stay private.
- After every sketch edit, a curve that took an offset node gets its own
point there, coincident with the node: the offset keeps sole ownership
and the curve follows the offset when its source moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Scenario: lines snap to and close onto an offset spline's ends (#2424)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Pull requests that can change a robustness golden check every seed but the 17 slowest, in the
same nextest run as the other tests instead of a second step after it (16-30 minutes on its own).
The slow seeds (about four fifths of the goldens' time) still run in the merge queue, on main and
nightly. A failed golden still prints how to re-record it, and junit.xml now holds the whole run.
- The slowest tests start first (nextest priority), so a shard no longer ends with one of them
running alone.
- tspline::tests::hostile_tsplines_never_panic joins the heavy tests pull requests skip (up to
12 minutes on a GitHub runner; the same kind of check as hostile_params_never_panic).
- The ci profile builds dependencies without line tables: the test archive pull requests' shards
download goes from 3.4 GB to 2.2 GB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2089
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3MF import: read objects in other model parts (production extension) (#2089)
Slicers save multi-part projects with the 3MF Production extension: the
root model's objects are components with `p:path` naming another model
part of the package, which holds the meshes. The reader skipped those
components and build items, so such files did not open at all.
Components and build items now keep the part they name, and the parts
objects name are read once each (looked up through an index of the zip
entries), with the number of part names and their total size capped.
Each part's unit is applied as it is read, so parts in different units
fit together. Cycle detection keys on (part, object), so parts that
place each other in a loop are refused.
Tests: components and build items in another part, part names in any
case, a part in centimetres under a root in millimetres, and hostile
packages (missing part, a path out of the package, an empty path, an
unknown object, a part that is no model, a loop between parts, more
part names than a package can hold). The 3MF mutation fuzz also runs
on a production-extension package.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3MF import: count every placement toward the budget (#2089)
An object that only places other objects added nothing to the triangle
budget, so a few objects each placing hundreds of components multiplied
at every level up to the depth cap (300 components, 3 levels: about 1 s;
deeper never finished). That was already true for one model part and now
reaches across parts. Every placement now costs at least one unit, so
such a file stops at the budget.
Test: six levels of 300 components over an empty object (300^6
placements) stop with a budget error in well under a second; without
the change the test does not finish.
Suggested in review by @jyviko.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Joints: a face or circle origin keeps its turn as the face tilts
A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Joints: origins on an edge of a face, at its middle or a corner
`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Show each dimension's parameter name while creating or editing it, and let
users insert another driving dimension at the expression cursor or selection.
Use the available editor width and keep Apply aligned with the right edge.
Add a tools dropdown with Measure, named user parameter expressions, and
access to the existing parameter table for adding and editing parameters.
Preserve the unfinished dimension expression while either window is open.
Cover reference insertion, dependent updates, parameter selection, dialog
round trips, applying and cancellation with UI integration tests. Update the
parameter guide.
Signed-off-by: Karl Von Richter<karl@embeint.com>
Tyler Chiriboga