Every tapped hole now drills the tap maker's tabulated drill. ISO metric takes Yamawa YEU23's
drill size column for cutting taps (printed p.704, M coarse; pp.704 to 706, MF fine): M8 drills
6.8 mm and M12 10.3 mm, where the major less the pitch gave 6.75 and 10.25. A custom metric size
the table lacks keeps the major less the pitch. UNC/UNF (Guhring), G, Rp, Rc and NPT (Yamawa)
were tabulated already. The Thread command's suggested hole for a metric size follows.
The Hole dialog's Tap drill diameter is now a field, the tap maker's drill by default, and the
command's `diameter` with a thread is checked the same way: a drill is accepted from the
internal thread's standard minor diameter (or the tap maker's drill where that lies below it:
Rp, Rc, NPT) to 5% over the tap maker's drill. Outside that the command names the range and
why. The field's tooltip gives the drill, the minor diameter and the range. Presets keep a
chosen drill.
A saved design keeps the diameter it stored, so it builds as before, and editing such a hole
keeps its drill: no preference and no format change. Scripts that give a thread without a
diameter drill the new default; ladder 05/007, 11/003 and rig case threads/2115 follow
analytically, and their golden entries are re-measured from runs (tier 05 re-sorted by time).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
Ladder 06/017's golden entry was edited by hand when the chamfered tip moved to ISO 724's d3.
Re-measured by running the case (solidcraft-cli kernel-cases on SMLib): its counts, area and
volume are the ones written by hand; its time is the run's. The tier's order by time holds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`tip` was none|chamfer, chamfer cutting every free end. It is now none|start|both: `start`
chamfers the end the thread starts from, refused when that end is not free (a shoulder, or a
stop inside the face), and `both` every free end as `chamfer` did. The dialog's Tip pick offers
None, Start and Both; `tip: chamfer` in a command names its replacements.
The thread's end options (runouts, tip, chamfer angle and depth) came without a format
change file; `pending/thread-ends.rs` records them and rewrites a saved `tip: chamfer` to
`both`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ISO 4753's chamfered end bounds the end's diameter by the minor diameter. The default took the
modelled root (the basic d1) for it, so the cone's small circle lay on the root cylinder and
the chamfer ring pinched to nothing wherever the groove reached the end. The default is now
the external minor diameter d3 = d - 1.226869 P of ISO 724, below d1: the cone crosses the
root, each end is a whole disk of d3 inside a whole conical ring. ISO 4753 is for ISO metric
threads; the other forms, whose root is already their design minor, give chamfer_depth.
Ladder 06/017's analytic volume follows (1945.354522563); its golden entry re-measured.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The inner corner of a 20 x 20 x 10 notch in the 60 x 40 x 20 box, three
concave r5 rounds with corner: g2: one valid body of 13 faces within the box,
the patch's twelve seams jumping at most 1e-3 per mm clear of the hole's six
corners (2.7e-4 measured; the ball corner jumps 0.2). The continuity check
looks within 11 mm of the corner: the vertical round, 2.5 mm long past its
setback, meets its faces 11.2 mm out with every round's G1 jump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
expected.json `continuity`: over the tangent seams wholly within `within_mm`
of `near`, the curvature jump across them (exact surfaces, 65 stations a
seam) at most `curvature_jump_per_mm` clear (`clear_mm` along the seam) of the
vertices where two of them turn, where a neighbour's own G1 seam ends.
07/015, the box corner's three r5 rounds with corner: g2: one valid body of 10
faces within the box, its patch's twelve seams jumping at most 1e-3 per mm
clear of the hole's six corners by 1.2 mm (2.7e-4 measured; the ball corner
of 009 jumps 0.2). Its golden entry is the passing run's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The corner pick (#5173) counts the edges meeting at a picked point; seams already
did not count, and now a tangent join between two spans of one smooth curve does
not either (4332: a chamfer on a spline rim was refused as two edges).
3383: the first occurrence is grounded by default on main, so the recipe
ungrounds it before moving it. 5024: a hole's position must lie on a face, so the
centre is on the box's top edge; the volume is half of the drilled cut, exact.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The r7 on the vertical edge runs on (tangent chain) up the side's arc on the
r5 round, a circle of radius 5: its contact line on that face would be the arc
offset 7 towards its centre, so no such round exists and the right answer is
a clean refusal. 018 picks a radius that fits (r2: 11 faces, inside the box).
cases.py now writes 013 (the corner setback, graded by its convexity bounds)
instead of marking it missing; its tolerance is the interval's exact half
width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
003 and 004 passed on one valid body alone. 003 is now the flange less
its M30 groove (stopped clear of the root round, run out through the
chamfer) and three M8 tap drills; 004 is 10/008 less the M16 groove on
the shelled boss, which cuts the wall only. With bboxes. Both hold on
SMLib (worst 1.4e-7 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It passed on one valid body alone. Each d3 vent goes through the shelled
top skin into the cavity and meets nothing else, so the case is 09/011
less 4 pi 1.5^2 1.5; with the bbox. Holds on SMLib (1e-6 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
010, 011 and 014 passed on one valid body alone. 010 (top rounds in
mitres, shelled open below) and 014 (drafted box with tilted rounds:
every level section loses the same elliptic corner) now check closed-form
volumes, exact counts and bbox (014 also its centre of mass). 011, the
running part shelled 1.5, checks the part less its cavity built feature
by feature, the offset faces meeting sharp at concave edges as in the
rest of the tier (a distance-based offset would differ by 0.3%). All hold
on SMLib (worst 1e-6 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It passed on one valid body alone. It now checks the chamfer's prism, the
two r2 rounds below it and the columns they carry on up into the chamfer
face (the section's first moment), with exact counts and bbox. Holds on
SMLib (8e-9 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
010, 011 and 012 passed on one valid body alone. 010 (r7 then an r3 chain
round its arc) and 011 (two r5 rounds in a mitre) now check closed-form
volumes, counts and bbox; 012's variable round takes only its edge and
runs on into the vertical round's column, so its volume is graded as the
interval between that end carried on as a constant r5 tube and as its
growing radius. All hold on SMLib (worst 4e-8 relative; 012 at the
growing-radius end).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
010 passed on one valid body alone: it now checks the tier-05 part less
the M16 groove (stopped w above the boss's shoulder, run out at its free
top) and the bbox. Two new cases with closed forms: 018, an M10 cut both
hands, whose crossing grooves leave the material fraction squared
(2 pi L int r m^2 dr, exact for L a whole number of pitches); 019, a
two-start Tr40x14(P7), six pitches of the Tr40x7 section. All hold on
SMLib (worst 2e-6 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
07, 08, 09, 11 and 12 passed on one valid body alone. Each now checks
its volume, bbox and (where derived) counts, area and centre of mass:
the three-section loft is the degree-2 interpolant r = 10 + (z-20)^2/40;
the square-to-circle loft a ruled prismatoid, its mixed area from the
sides ruled to rational quarter arcs; the periodic fit spline the cyclic
C2 chord-length cubic; the pleated skins star polygons on fixed rays,
their crossing integrated exactly per wedge; the cap's union integrated
as y-intervals over x and z. All hold on SMLib (worst 9e-8 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The generator had fallen behind the tree: it no longer wrote 02/021-025,
03/010, 04/011-012 and 09/012-015, and its 07/016 lacked the second round's
tangent_chain. Each is now built in cases.py; the two reporters' scripts
(04/011, 04/012) are kept verbatim in reported.py. Regenerating reproduces
the tree exactly; the only file changes are the generator's own format
(volumes to 9 decimals, one-space indent, a final newline), all under 1e-8
relative.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three r5 rounds at (60,40,20) set back 8: the volume between the convex
hull of the body on the corner cube's faces and the rounds' prisms (both
bounds closed form or a sampled hull below the true one), the box's bbox,
and SMLib's setback-patch topology (15 faces, 36 edges, 23 vertices).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Recorded on SMLib replay 2c5baae (screw sweep walls exact and within their
tolerance, the radial sweep, the point solve on long rational surfaces) with
the thread rework: 06/008 (two starts) and 06/009 (runout) now graded and
passing, 06/011-017 new (Tr, Acme, S, ASME buttress, an internal Tr nut,
left hand, the chamfered tip), and 06/003, 004 and 007 grading the extent and
the collar. 132/135 pass; left: 07/013 corner setback, 07/015 G2 corners
(unsupported) and 07/016 three sequential corner rounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ladder 06/009 had no way to ask for one: "solid.thread has no runout (vanishing thread)
length". With SMLib's smlib_screw_sweep_radial (replay e7acea1):
- smlib: the FFI binding and Brep::screw_sweep_radial, the profile moved off the axis by a
piecewise linear law of the turn; crate test: a tooth moved out 1 mm over three turns has
A 2π (c turns + ∫ offset dt).
- kernel: sweep_helix_radial, sharing sweep_helix's checks (helix_profile).
- doc: `ease_in`, `ease_out` (a length, or ISO 3508's standard 2.5 P or short 1.25 P) fade the
groove over that length, its section moving out of the material as it turns (outward for a
shaft, inward for a nut). ease_in is at the end the thread starts from. The runout lies past
the full-form length: beyond a square stop, before a shoulder up to its clearance; at a free
end inside the face. Runouts longer than the thread are refused. No end gets one by default,
so saved threads keep their geometry.
The cut is the integral over the turn of the clipped section's 2π∫ r dA: engine test (2.5 P
and 1.25 P between two collars) within the sweep's wall tolerance times the runouts' wall area
(0.029 against a 0.036 mm³ bound), ladder 06/009 (004's shaft, a 2 P runout before the
shoulder) graded in closed form (measured 1.7e-6 off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`tip: chamfer` cuts ISO 4753's chamfered end at each free end a modelled external thread
reaches, after the groove, so the last teeth taper into the cone instead of ending in a
ragged first turn: the material outside a cone `chamfer_angle` to the axis (default 45°)
reaching d_f = d - 2 `chamfer_depth` at the face's end (default the external minor diameter,
the largest the standard allows), a revolved ring cut by one boolean per end. Past the end the
ring keeps to the radii the groove's overrun already cuts. An internal thread is refused (its
entry takes the hole's countersink), as is a tip with no free end or on a cosmetic thread.
The cone is axisymmetric and cut after the screw-symmetric groove, so the volume is the stock's
chamfered section with the thread's material fraction: engine test (both ends 45°, and 30°
x 0.5 mm at a shaft's one free end above a collar) within 1e-4, ladder 06/017 (measured
2.4e-7 off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ladder 06/008 had no way to ask for one: "solid.thread has no start count". `starts: n` (1 to
8) cuts n grooves of lead n x P, the j-th a j/n turn round from the first (the same helix j
pitches along), in one boolean with their union. A designation that gives the lead
(M16xPh3P1.5, Tr40x14(P7)) gives the starts, and a `starts` that disagrees is refused. The
helix's self-clearance check and the turn limit use the lead.
Over the same length n grooves of lead nP take the volume of one start of pitch P: engine test
(2 and 3 starts, M10xPh3P1.5) within 1e-4 of the closed form, ladder 06/008 graded as 001
(measured 3.5e-7 off).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the ISO metric 60° thread existed. Forms now (crates/doc/src/thread_forms.rs, values and
sources in docs/threads.md): ISO metric (ISO 68-1), trapezoidal (ISO 2904 design profile, ISO
2902 sizes), general purpose Acme (ASME B1.5), metric buttress 3°/30° (DIN 513), buttress inch
7°/45° (ASME B1.9 basic profile). Each has its groove as a straight-flanked polygon, its standard
sizes (none for ASME buttress), its designations (M10, M16xPh3P1.5, Tr40x14(P7), S20x4,
1/2-10 ACME, 2.5-8 BUTT) and the size that fits a face. The square thread is refused: no current
standard defines it.
`hand: right | left | both`: a left-handed groove is the screw motion about the reversed axis
rising along it; both cuts the two grooves, crossing, in one boolean. `steep_flank` turns a
buttress. The design diameters are checked against the published tables (ISO 2904/DIN 103,
DIN 513 via IS 4696-3); every form's cut against 2π∫ r w(r) dr per turn to 1e-4 in engine tests
and to 1e-4 in ladder 06/011 to 016 (they measure within 5e-7).
FeatureKind::Thread holds every option the command has (form, hand, starts, ease_in, ease_out,
tip, chamfer_angle, chamfer_depth, steep_flank, all defaulted so saved threads load unchanged);
starts, runouts and the chamfered tip are refused as not built yet. suggested_thread_in takes the
form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A thread of some length ran from "the end of the face nearest the pick", a coin toss for a
pick in the middle (rig 602's 4 mm thread meant for the free bottom end ran at the head end,
cutting 1.17 mm into the hex), and every thread end at a face end got a one-pitch overrun,
which at a shoulder gouged the material past it (ladder 06/004 cut 0.9% of its volume out of
the collar).
- kernel: material_in_ring, the exact intersection of a body with a ring about a cylinder
face's axis, by an SMLib boolean.
- doc: a face end is free when no material lies past it, over the span the groove's one-pitch
overrun reaches beyond its first pitch, within the radii the groove cuts (a cap, a chamfer
the groove runs out through, a counterbore). At a free end the groove runs out as before; at
a closed one (a shoulder, a head, a blind hole's bottom) it stops with its widest part clear
of it; inside the face it stops square.
- doc: a thread of some length starts at the end nearest `from`, else at the face's only free
end, else at the end the pick lies within a third of the face of; a pick in the middle of a
face whose ends are alike is refused, naming `from`. A length as long as the face runs the
whole face. `up_to` a plane or a point's place along the axis. New fields `from`, `up_to`
default to none, so saved threads keep their meaning where it was not a coin toss.
- engine: solid.thread takes extent (full|length|up_to), from and up_to.
- ladder 06/003 (now with `from`), 004 and 007 are graded by volume and centre of mass in
closed form (a square stop inside material removes exactly length/P turns, the section being
symmetric); rig 602's method says why the thread is at the bottom, tolerance 0.02%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three new cases in closed form: two through holes touching at a point
(02/021), the stock shelled with no face open (09/012, a sealed void, two
shells) and a dome shelled from its flat base (09/013, its rim the circle
r18). Nine rig cases copied into their tiers: a cylinder grazing a hole's
edge (1279), lips 1e-4 off a base's walls (2928), wall halves merged into a
flange (494), flush chord layers (5197), the horn torus revolve (4007),
crossing pleated loft skins (4623), loft ribs joined to a rounded pad (4092),
a drafted box with rounds shelled (3576) and a shelled dome with its ring
joined back (4847). Golden recorded on SMLib replay 8017df9: 123/128 pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The case's base is a stadium ring (r 3..5 arcs, centres 20 apart, z 0..2),
as its description and expected volume (2 (80 + 16 pi) for the base) say,
but its extrude picked no profile, and "all profiles" is every drawn region:
the ring and the stadium island inside it. The base came out filled and the
join 1066 mm3. SMLib's union was exact for those operands. The extrude now
picks the ring (the region at (4, 0)).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
solid.shell refused an empty face list ("select 1…1000 faces"), and the
shell feature found its body from the first face picked. SMLib shells with no
face opened (the void sealed inside, its own shell): the command now takes
`faces: []`, the feature shells the one body there is or the one named
(`body`), and an outside or both-ways shell pushes no open face out of the
cavity. Rig shell/4009 declares the void's shell (`shells: 2`), as its method
says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rig case shell/4711 (a 60 x 40 x 10 block, an r3 through hole at (22.5, 7), a 10 x 10 notch on
the front edge, shelled 2 open at the bottom) failed with "SMLib shell: operation: SMLib failed
(status 1027)". The hole is 4 = 2 x 2 from the front face: the hole wall's offset (r5) is tangent
to the front's at (22.5, 2), the walls meet along a line and the cavity would pinch to zero
thickness there, which is no solid. Refusing it is right; the refusal did not say why.
SMLib now refuses an offset whose walls would meet with its own status, SMLIB_ERR_WALLS_TOUCH
(-1110). The smlib crate reads it as Error::WallsTouch; the kernel's offset backend turns it into
a sentence with the wall, as blends turn NoRoom into one: "shell: the 2 mm walls would meet along
a line (between a hole and the side, for example), which leaves no solid there; use a thinner or
thicker wall, or move the feature". Thicker builds too (SMLib shells 4711 at 2.5, the walls
crossing and merging between the hole and the front), so the sentence offers both.
4711 expects that refusal and its message ("outcome": "refused", "refusal"), its "what" and
"method" saying why: the wall is 4 = 2 x 2, the walls meet along a line. Tests: the smlib crate
shells 4711 built from primitives (2 refused as WallsTouch, 1.5 and 2.5 valid), the kernel a
plate whose hole is 3 from its side at 1.5 (refused, with "the 1.5 mm walls would meet along a
line").
Results (run-sc.sh against SMLib a759622's code, which differs from the tree run only in
comments and docs; baseline 858f381fc-5448b9a): rig 410/447 (409
before; 4711 fail -> pass as the refusal, nothing else changed), ladder 109/116 (unchanged),
kernel lib 535 passed / 202 failed (one new test; the same failing set), smlib crate 53 / 2
(one new test; the same failing set).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0113gDVmStT5tCGKW9Fxgc5K
SMLib now builds a round or chamfer whose rail runs off its face across a cliff (an opening's
rim, the body's outline): the blend is made as if its faces continued and what it removes is
subtracted, so it never bridges an opening (owner decision for rig 5158/5181; fork commit
"SMLib, capi: a convex blend overflowing a cliff is subtracted from the body"). The tests that
expected a refusal for such blends now expect the body, each answer from the geometry:
- variable_radius_on_a_box_edge: 2 -> 50 on the 10x20x30 box's top edge builds at
3546.18767939 (circular sections in y = const, the r x r square less the quarter disc,
clipped to the box; rel 1e-4).
- variable_radius_from_a_spline: the "big" law builds at 6000 - 726.5334566720 (de Boor law,
split at the knot and where r crosses 10).
- a_chamfer_meets_sloped_end_planes: chamfer 25 removes 11500 - 4625 * slope
(integral of 40 - 2 * slope * y over z >= y - 5).
- g2_fillet_refuses_invalid_geometry: G2 at 25 builds at 6138.1606889 (the quintic section
with control points at thirds, clipped to 20x20, along 20).
- fillet_max_each_reduces_only_where_the_radius_does_not_fit: both edges take 4, 24438.7317761.
- hostile_inputs_are_errors: chamfer 30 on the cube builds at 1000 (y + z <= 10 along 20);
R50 still fails.
- kernel-cases fillets/1080: the 9 mm chamfer into the openings builds at 3350
(method in expected.json).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0113gDVmStT5tCGKW9Fxgc5K
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With touching: separate (the default) a join groups the joined body's
pieces by face contact. The groups that hold the material of the body
before the feature stay in it (each unless it touches one already kept;
the first group where the lineage doesn't say), and so do the groups that
touch nothing: a virtual grouping later operations take as one body. Every
other group that touches another along an edge or at a point becomes a
body of its own, and the feature's notice says so. The joined body keeps
its name and never holds an edge or point contact. A join that only
grouped pieces apart gives no notice, so KeptSeparate::Apart is gone.
one_body still keeps every piece in one body.
SMLib's export copies an edge or vertex that touching solids share once
per solid, so the record never listed those contacts:
Brep::region_contacts now takes such copies (the same curve and interval
between vertices at the same points, a vertex at the same point) as the
edge or vertex they share. A contact SMLib leaves out of the topology (the
3612 spoke tangent to its hub) is found on the exact geometry, the least
distance within the record tolerance, and reported as KeptSeparate::
Touching ("along a line or at a point").
The pending format change join-touching-bodies stays: older designs kept
pieces touching along an edge or at a point in one body too. Its notes say
so, and the reopened legacy emboss still expects touching: one_body.
Tests restored to their form before cc49081df and 733d3bd19: kernel-cases
2896-join-arm-end-near-ring-wall-gap (one body of two shells), 3379, 3455
and 3526 (no touching: one_body); the engine tests of posts joined while
apart (twice), two cubes for interference, a ring with a cylinder, the
buried tab and a_join_adds_only_its_sketch's 0.1 mm gap.
join_meeting_nothing_keeps_the_first_body expects one body and no notice.
The #3378 spoke stays 1 mm inside the hub.
New tests: blocks touching along an edge are split with the along-an-edge
notice; blocks apart stay one body without one; a ring with an arm on its
corner edge and a hub apart gives ring and hub in one body and the arm on
its own (doc); the engine's notice for an edge contact; the record's
contacts of cubes sharing an edge or a vertex (kernel).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The r3 on the top edge at x = 60 takes tangent_chain: false, so it
rounds that edge alone and not the r5 round's tangent chain with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit cf46e2a713c45ae0427e831cae1dc1d3b858febc)
A feature's touching parameter says what a join makes of solids that
share no volume and no area: separate (the default) splits the joined
body's pieces that share no face into bodies of their own, named, with
history and lineage, as a cut's pieces are; one_body keeps one body of
several pieces. The state records how the kept-apart pieces met
(KeptSeparate: along an edge, at a point, apart) for the feature's
notice.
Older builds kept every join's pieces in one body: the pending format
change join-touching-bodies gives each joining feature of an older design
touching: one_body, so existing designs keep their bodies.
kernel-cases 2896-join-arm-end-near-ring-wall-gap: the arm meets nothing,
so it now stays a body of its own (body_count 2, one shell each).
kernel-cases that join solids apart to make the body they test ask for
it with touching: one_body: 3379 (the hub joined to the ring before the
spokes reach it), 3455 (64 pegs in one body) and 3526 (a two-lump target
for an intersect).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit 2c2aaed86f4be60f7f88e40bc24b60de60085148)
A whole circle is one closed edge now, so the outer wall and the hole wall each have a seam; the
rig counts seam edges (4005, 4006), and 1c490ddd's count without them broke those cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLib is the only kernel now. cargo xtask kernel-cases ran every case once
per kernel asked for (--kernel default|smlib|both), setting
SOLIDCRAFT_KERNEL per run, and wrote a column per kernel; solidcraft-cli no
longer reads that variable.
The rig and the ladder run each case once, through solidcraft-cli built with
--features smlib (cargo run passes it), and report one result per case:
--kernel and the env var are gone. Each run has an output folder (--out,
default target/kernel-cases, target/kernel-ladder for the ladder) holding
results.json (every case's full result, which --results used to write on
request) and dumps/<area>-<case>/: every case runs with
solidcraft-cli kernel-cases --dumps=<out>/dumps, so a failed SMLib call
leaves its inputs for replay.
The ladder's golden holds one entry per case: golden.json is the last
recording's smlib entries, which predate SMLib running every case (its
reason says so); record it again after the first SMLib-only run.
docs/kernel-cases.md (until the next run regenerates it),
tests/kernel-cases/README.md, docs/kernel-smlib-sweeps-shell.md (its truck
column and comparisons dropped), xtask's and solidcraft-cli's usage text:
one kernel. Nothing was run.
clippy -p xtask --all-targets: clean.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A rig case whose SMLib call fails left nothing to replay it from: nothing called
solidcraft_smlib::set_dump_dir. `solidcraft-cli kernel-cases --dumps=DIR` now points SMLib's
dump folder at DIR/<area>-<case> before each case runs, so a failing call leaves its
arguments and B-reps there (smlib_brep_read reads them back into a scratch C program), and
turns it off after the run. Off without the flag. The kernel exposes it as
smlib_dump_dir, beside smlib_built (the CLI reaches SMLib only through the kernel).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The case expected two bodies for a combine join of an arm 0.01 mm clear of a
ring. A join's tool that meets no target goes into the target as a separate
lump and the tool body is consumed (doc eval Operation::Join; the engine test
join_meeting_nothing_keeps_the_first_body): one body, Ring, of two shells,
with the volumes' sum. The case's point, nothing fuses, is kept: shells 2 and
the summed volume.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
ladder/05/011 expected 8 faces (the stock's 6 and one per hole). With equal
radii the two walls cross along two ellipses that meet at the two points
where the walls are tangent (x = 25 and 35, y = 20, z = 10), so each wall is
left in two pieces that touch only at those points, with no edge between
them: separate faces, 10 in all. SMLib makes those 10 (volume exact); truck's
8 came with an invalid record. Derivation in the case's method.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The case's own method says one body with an inner shell (the void of
radius 18.5 inside the ball of radius 40), but without a "shells" entry
the rig asks one shell per body. It now asks two, as the method derives.
SMLib still fails the case on its volume: 294558 mm3, near the sum of
the two balls (294604) rather than their difference (241561), so the
inner shell is not taken as a void.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel runs exact helical sweeps and never resizes; the check that
refuses a thread off its hole's or shaft's size is the engine's sugar
(AGENTS.md). So the seven cases (995, 1443, 2152, 2969, 3366, 2369,
2705) go back to expecting that refusal and its message, as 1375e905 had
them, reversing 1588dd70.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
All operations move to SMLib at once, so the selector is no longer the booleans' own:
`SOLIDCRAFT_KERNEL=smlib|truck` (read once, unset is truck, the same refusals for an unknown
value or SMLib in a build without it) is answered by `solidcraft_kernel::backend()`
(crates/kernel/src/backend.rs), which every operation's dispatch calls. The boolean's SMLib path
moves to smlib_boolean.rs. The regression rig's kernel check (`boolean_kernel`) now answers from
the switch, and the rig and CLI set SOLIDCRAFT_KERNEL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
784, 1753 and the two 1666 lofts came from holes in exported meshes, so
each now also requires a mesh with no open or over-shared edge. On today's
kernel 784 and both lofts are watertight; 1753's bowl, its rim cut by a
cylinder, still has 3 open mesh edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two faults made simple curved solids look open (#818's blind hole: 80 open edges, a stadium
slot: 52):
- It meshed with `refine`, the measuring mesh, which splits triangles across curved faces on
their own and leaves T-junctions on the edges they share with neighbours. It now checks the
display mesh, whose faces share each edge's points.
- It matched vertices by rounding to a 1e-6 mm grid, which splits points a rounding error apart
across a cell boundary. It now joins vertices closer than `tolerance.weld_mm` (default 1e-4 mm).
Both cases now have 0 open edges, also with the weld at 1e-6 mm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2822, 3952 and 4149 cut long modelled threads into filleted or revolved
bodies; each takes minutes on today's kernel, so they get timeout_s 600
instead of the default 180.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- tests/kernel-cases/sources.json gives each looked-at number's kind: an open or closed issue, a
merged PR, one of the frozen truck-geometry PRs, a kernel-paused PR. The report's coverage by
source counts how many of each were looked at, became cases or were skipped.
- crashes/2357: one join of a ring of 90 overlapping cylinder segments. The right answer is one
closed ring body. The old kernel still panics in its intersection curves and runs past the
timeout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jyviko