{
  "commands": [
    {
      "command": "file.new",
      "params": {
        "name": "Original exploded bench coffee machine"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Studio floor",
        "corner": [
          -6000,
          -6000,
          -5
        ],
        "length": 12000,
        "width": 12000,
        "height": 5,
        "operation": "new"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Housing plinth profile",
        "plane": {
          "origin": [
            0,
            8,
            30
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -70.0,
          -65.0
        ],
        "p1": [
          70.0,
          65.0
        ],
        "radius": 24
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 12,
        "operation": "new",
        "body_name": "Housing plinth"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Housing shell profile",
        "plane": {
          "origin": [
            0,
            8,
            55
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -65.0,
          -58.0
        ],
        "p1": [
          65.0,
          58.0
        ],
        "radius": 23
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -60.0,
          -53.0
        ],
        "p1": [
          60.0,
          53.0
        ],
        "radius": 18
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 210,
        "operation": "new",
        "body_name": "Housing shell",
        "profiles": [
          {
            "point": [
              -62.5,
              0
            ]
          }
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          -46,
          -60,
          88
        ],
        "length": 92,
        "width": 35,
        "height": 149,
        "operation": "cut",
        "targets": [
          "Housing shell"
        ],
        "name": "Open brewing bay"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Housing upper shoulder profile",
        "plane": {
          "origin": [
            0,
            8,
            265
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -65.0,
          -58.0
        ],
        "p1": [
          65.0,
          58.0
        ],
        "radius": 23
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 8,
        "operation": "new",
        "body_name": "Housing upper shoulder"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Internal chassis",
        "corner": [
          -42,
          38,
          63
        ],
        "length": 84,
        "width": 5,
        "height": 189,
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Open brewing head",
        "base": [
          0,
          -76,
          307
        ],
        "radius": 43,
        "height": 95,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          0,
          -77,
          307
        ],
        "radius": 31,
        "height": 97,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Open brewing head"
        ],
        "name": "Horizontal open brew bore"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Brewing head roof profile",
        "plane": {
          "origin": [
            0,
            -6,
            352
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -57.5,
          -51.5
        ],
        "p1": [
          57.5,
          51.5
        ],
        "radius": 25
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 7,
        "operation": "new",
        "body_name": "Brewing head roof"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          -18,
          -9,
          351
        ],
        "length": 36,
        "width": 7,
        "height": 9,
        "operation": "cut",
        "targets": [
          "Brewing head roof"
        ],
        "name": "Capsule loading slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Brewing collar",
        "base": [
          0,
          -88,
          307
        ],
        "radius": 35,
        "height": 9,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          0,
          -89,
          307
        ],
        "radius": 28,
        "height": 11,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Brewing collar"
        ],
        "name": "Open brew throat"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Shower screen",
        "base": [
          0,
          10,
          307
        ],
        "radius": 27,
        "height": 2,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          -10,
          9,
          300
        ],
        "radius": 1.6,
        "height": 4,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Shower screen"
        ],
        "name": "Shower aperture"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          0,
          9,
          300
        ],
        "radius": 1.6,
        "height": 4,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Shower screen"
        ],
        "name": "Shower aperture"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          10,
          9,
          300
        ],
        "radius": 1.6,
        "height": 4,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Shower screen"
        ],
        "name": "Shower aperture"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          -10,
          9,
          314
        ],
        "radius": 1.6,
        "height": 4,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Shower screen"
        ],
        "name": "Shower aperture"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          0,
          9,
          314
        ],
        "radius": 1.6,
        "height": 4,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Shower screen"
        ],
        "name": "Shower aperture"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          10,
          9,
          314
        ],
        "radius": 1.6,
        "height": 4,
        "axis": "Y",
        "operation": "cut",
        "targets": [
          "Shower screen"
        ],
        "name": "Shower aperture"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Lever centerline profile",
        "plane": {
          "origin": [
            0,
            -28,
            0
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            0,
            1
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -77,
            306
          ],
          [
            -77,
            365
          ]
        ],
        "ids": [
          "lever_left"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          -77,
          365
        ],
        "through": [
          -72.6066,
          375.6066
        ],
        "end": [
          -62,
          380
        ],
        "id": "lever_bend_left"
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -62,
            380
          ],
          [
            62,
            380
          ]
        ],
        "ids": [
          "lever_top"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          62,
          380
        ],
        "through": [
          72.6066,
          375.6066
        ],
        "end": [
          77,
          365
        ],
        "id": "lever_bend_right"
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            77,
            365
          ],
          [
            77,
            306
          ]
        ],
        "ids": [
          "lever_right"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.pipe",
      "params": {
        "path_sketch": "Lever centerline profile",
        "path": [
          "lever_left",
          "lever_bend_left",
          "lever_top",
          "lever_bend_right",
          "lever_right"
        ],
        "diameter": 9,
        "operation": "new",
        "body_name": "Bent chrome lever"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Left lever ball",
        "center": [
          -77,
          -28,
          306
        ],
        "radius": 8,
        "operation": "new"
      }
    },
    {
      "command": "solid.sphere",
      "params": {
        "body_name": "Right lever ball",
        "center": [
          77,
          -28,
          306
        ],
        "radius": 8,
        "operation": "new"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Smoky D tank profile",
        "plane": {
          "origin": [
            225,
            35,
            99
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -43,
            0
          ],
          [
            -43,
            45
          ],
          [
            43,
            45
          ],
          [
            43,
            0
          ],
          [
            42.948204616822416,
            -2.1099099960789744
          ],
          [
            42.79294324690447,
            -4.214737034171106
          ],
          [
            42.53458992848558,
            -6.309410401580555
          ],
          [
            42.17376705733891,
            -8.388883846693515
          ],
          [
            41.71134388736539,
            -10.448147735840346
          ],
          [
            41.148434436484976,
            -12.48224112194188
          ],
          [
            40.486394802869896,
            -14.486263695865462
          ],
          [
            39.72681989798533,
            -16.455387591698862
          ],
          [
            38.87153960430806,
            -18.38486901750213
          ],
          [
            37.92261436697927,
            -20.2700596835179
          ],
          [
            36.8823302300117,
            -22.10641800030853
          ],
          [
            35.75319332900945,
            -23.889520019842895
          ],
          [
            34.537923853667735,
            -25.615070093174634
          ],
          [
            33.23944949459769,
            -27.278911219036758
          ],
          [
            31.860898390263245,
            -28.87703505842179
          ],
          [
            30.405591591021544,
            -30.405591591021544
          ],
          [
            28.87703505842179,
            -31.86089839026324
          ],
          [
            27.278911219036758,
            -33.239449494597686
          ],
          [
            25.61507009317464,
            -34.53792385366773
          ],
          [
            23.889520019842898,
            -35.75319332900945
          ],
          [
            22.10641800030853,
            -36.8823302300117
          ],
          [
            20.270059683517907,
            -37.92261436697926
          ],
          [
            18.384869017502133,
            -38.87153960430806
          ],
          [
            16.455387591698862,
            -39.72681989798533
          ],
          [
            14.486263695865462,
            -40.486394802869896
          ],
          [
            12.48224112194188,
            -41.14843443648498
          ],
          [
            10.448147735840351,
            -41.71134388736539
          ],
          [
            8.388883846693519,
            -42.17376705733891
          ],
          [
            6.309410401580555,
            -42.53458992848558
          ],
          [
            4.2147370341711135,
            -42.792943246904464
          ],
          [
            2.1099099960789793,
            -42.948204616822416
          ],
          [
            2.6329906181668092e-15,
            -43.0
          ],
          [
            -2.1099099960789744,
            -42.948204616822416
          ],
          [
            -4.214737034171108,
            -42.79294324690447
          ],
          [
            -6.309410401580551,
            -42.53458992848558
          ],
          [
            -8.388883846693512,
            -42.17376705733891
          ],
          [
            -10.448147735840346,
            -41.71134388736539
          ],
          [
            -12.482241121941874,
            -41.14843443648498
          ],
          [
            -14.486263695865457,
            -40.486394802869896
          ],
          [
            -16.45538759169886,
            -39.72681989798533
          ],
          [
            -18.38486901750212,
            -38.87153960430807
          ],
          [
            -20.2700596835179,
            -37.92261436697927
          ],
          [
            -22.106418000308526,
            -36.8823302300117
          ],
          [
            -23.889520019842884,
            -35.75319332900945
          ],
          [
            -25.615070093174634,
            -34.537923853667735
          ],
          [
            -27.27891121903675,
            -33.23944949459769
          ],
          [
            -28.877035058421793,
            -31.860898390263237
          ],
          [
            -30.40559159102154,
            -30.405591591021544
          ],
          [
            -31.86089839026323,
            -28.877035058421797
          ],
          [
            -33.23944949459769,
            -27.278911219036758
          ],
          [
            -34.53792385366773,
            -25.61507009317464
          ],
          [
            -35.75319332900945,
            -23.889520019842895
          ],
          [
            -36.882330230011696,
            -22.106418000308537
          ],
          [
            -37.92261436697926,
            -20.270059683517907
          ],
          [
            -38.87153960430806,
            -18.384869017502126
          ],
          [
            -39.72681989798533,
            -16.455387591698866
          ],
          [
            -40.48639480286989,
            -14.486263695865475
          ],
          [
            -41.148434436484976,
            -12.482241121941883
          ],
          [
            -41.71134388736539,
            -10.448147735840354
          ],
          [
            -42.17376705733891,
            -8.38888384669353
          ],
          [
            -42.53458992848558,
            -6.309410401580558
          ],
          [
            -42.792943246904464,
            -4.214737034171115
          ],
          [
            -42.948204616822416,
            -2.1099099960789727
          ]
        ],
        "closed": true,
        "infer": false
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 171,
        "operation": "new",
        "body_name": "Smoky D tank"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Tank cavity profile",
        "plane": {
          "origin": [
            225,
            35,
            103
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -40,
            0
          ],
          [
            -40,
            42
          ],
          [
            40,
            42
          ],
          [
            40,
            0
          ],
          [
            39.9518182482069,
            -1.9627069730967206
          ],
          [
            39.80738906688788,
            -3.920685613182424
          ],
          [
            39.56706039859124,
            -5.8692189782144695
          ],
          [
            39.23141121612922,
            -7.8036128806451295
          ],
          [
            38.801250127781756,
            -9.719207196130554
          ],
          [
            38.27761342928835,
            -11.611387090178493
          ],
          [
            37.66176260732083,
            -13.475594135688802
          ],
          [
            36.95518130045147,
            -15.307337294603592
          ],
          [
            36.159571724937734,
            -17.102203737211283
          ],
          [
            35.276850573934205,
            -18.855869473039906
          ],
          [
            34.30914440001089,
            -20.564109767728866
          ],
          [
            33.25878449210181,
            -22.222809320784087
          ],
          [
            32.1283012592258,
            -23.827972179697333
          ],
          [
            30.92041813450948,
            -25.37573136654582
          ],
          [
            29.63804501419837,
            -26.862358193880734
          ],
          [
            28.284271247461902,
            -28.284271247461902
          ],
          [
            26.862358193880734,
            -29.638045014198365
          ],
          [
            25.37573136654582,
            -30.920418134509475
          ],
          [
            23.82797217969734,
            -32.12830125922579
          ],
          [
            22.22280932078409,
            -33.25878449210181
          ],
          [
            20.564109767728866,
            -34.30914440001089
          ],
          [
            18.855869473039913,
            -35.2768505739342
          ],
          [
            17.102203737211287,
            -36.159571724937734
          ],
          [
            15.307337294603593,
            -36.95518130045147
          ],
          [
            13.475594135688802,
            -37.66176260732083
          ],
          [
            11.611387090178493,
            -38.27761342928836
          ],
          [
            9.71920719613056,
            -38.801250127781756
          ],
          [
            7.803612880645133,
            -39.23141121612922
          ],
          [
            5.8692189782144695,
            -39.56706039859124
          ],
          [
            3.920685613182431,
            -39.80738906688787
          ],
          [
            1.962706973096725,
            -39.9518182482069
          ],
          [
            2.4492935982947065e-15,
            -40.0
          ],
          [
            -1.9627069730967204,
            -39.9518182482069
          ],
          [
            -3.920685613182426,
            -39.80738906688788
          ],
          [
            -5.869218978214466,
            -39.56706039859124
          ],
          [
            -7.803612880645128,
            -39.23141121612922
          ],
          [
            -9.719207196130554,
            -38.801250127781756
          ],
          [
            -11.611387090178486,
            -38.27761342928836
          ],
          [
            -13.475594135688798,
            -37.66176260732083
          ],
          [
            -15.307337294603588,
            -36.95518130045147
          ],
          [
            -17.102203737211276,
            -36.159571724937734
          ],
          [
            -18.85586947303991,
            -35.276850573934205
          ],
          [
            -20.564109767728862,
            -34.30914440001089
          ],
          [
            -22.22280932078408,
            -33.25878449210181
          ],
          [
            -23.827972179697333,
            -32.1283012592258
          ],
          [
            -25.375731366545814,
            -30.920418134509482
          ],
          [
            -26.862358193880738,
            -29.63804501419836
          ],
          [
            -28.2842712474619,
            -28.284271247461902
          ],
          [
            -29.638045014198354,
            -26.86235819388074
          ],
          [
            -30.92041813450948,
            -25.37573136654582
          ],
          [
            -32.12830125922579,
            -23.82797217969734
          ],
          [
            -33.25878449210181,
            -22.222809320784087
          ],
          [
            -34.30914440001088,
            -20.564109767728873
          ],
          [
            -35.2768505739342,
            -18.855869473039913
          ],
          [
            -36.159571724937734,
            -17.10220373721128
          ],
          [
            -36.95518130045147,
            -15.307337294603595
          ],
          [
            -37.661762607320824,
            -13.475594135688812
          ],
          [
            -38.27761342928835,
            -11.611387090178496
          ],
          [
            -38.801250127781756,
            -9.719207196130563
          ],
          [
            -39.23141121612922,
            -7.803612880645145
          ],
          [
            -39.56706039859124,
            -5.869218978214472
          ],
          [
            -39.80738906688787,
            -3.920685613182433
          ],
          [
            -39.9518182482069,
            -1.9627069730967186
          ]
        ],
        "closed": true,
        "infer": false
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 169,
        "operation": "cut",
        "targets": [
          "Smoky D tank"
        ],
        "name": "Open tank cavity with four millimetre base"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Separate tank lid profile",
        "plane": {
          "origin": [
            225,
            35,
            304
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -45,
            0
          ],
          [
            -45,
            47
          ],
          [
            45,
            47
          ],
          [
            45,
            0
          ]
        ],
        "ids": [
          "outerleft",
          "outerback",
          "outerright"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          45,
          0
        ],
        "end": [
          -45,
          0
        ],
        "through": [
          0,
          -45
        ],
        "id": "outerfront"
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 5,
        "operation": "new",
        "body_name": "Separate tank lid"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Tank lid grip profile",
        "plane": {
          "origin": [
            225,
            41,
            309
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -19.0,
          -6.0
        ],
        "p1": [
          19.0,
          6.0
        ],
        "radius": 5
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 5,
        "operation": "new",
        "body_name": "Tank lid grip"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Clear ribbed bin profile",
        "plane": {
          "origin": [
            -157,
            -23,
            58
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -33.0,
            -30
          ],
          [
            -31.2,
            -32
          ],
          [
            -29.5,
            -30
          ],
          [
            -27.5,
            -30
          ],
          [
            -25.7,
            -32
          ],
          [
            -24.0,
            -30
          ],
          [
            -22.0,
            -30
          ],
          [
            -20.2,
            -32
          ],
          [
            -18.5,
            -30
          ],
          [
            -16.5,
            -30
          ],
          [
            -14.7,
            -32
          ],
          [
            -13.0,
            -30
          ],
          [
            -11.0,
            -30
          ],
          [
            -9.2,
            -32
          ],
          [
            -7.5,
            -30
          ],
          [
            -5.5,
            -30
          ],
          [
            -3.7,
            -32
          ],
          [
            -2.0,
            -30
          ],
          [
            0.0,
            -30
          ],
          [
            1.8,
            -32
          ],
          [
            3.5,
            -30
          ],
          [
            5.5,
            -30
          ],
          [
            7.3,
            -32
          ],
          [
            9.0,
            -30
          ],
          [
            11.0,
            -30
          ],
          [
            12.8,
            -32
          ],
          [
            14.5,
            -30
          ],
          [
            16.5,
            -30
          ],
          [
            18.3,
            -32
          ],
          [
            20.0,
            -30
          ],
          [
            22.0,
            -30
          ],
          [
            23.8,
            -32
          ],
          [
            25.5,
            -30
          ],
          [
            27.5,
            -30
          ],
          [
            29.3,
            -32
          ],
          [
            31.0,
            -30
          ],
          [
            33,
            -30
          ],
          [
            33,
            30
          ],
          [
            -33,
            30
          ]
        ],
        "closed": true,
        "infer": false
      }
    },
    {
      "command": "sketch.rectangle.two_point",
      "params": {
        "p0": [
          -30,
          -27
        ],
        "p1": [
          30,
          27
        ]
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 72,
        "operation": "new",
        "body_name": "Clear ribbed bin",
        "profiles": [
          {
            "point": [
              31,
              0
            ]
          }
        ]
      }
    },
    {
      "command": "solid.box",
      "params": {
        "body_name": "Bin base tool",
        "corner": [
          -190,
          -53,
          57
        ],
        "length": 66,
        "width": 60,
        "height": 4,
        "operation": "new"
      }
    },
    {
      "command": "solid.combine",
      "params": {
        "target": "Clear ribbed bin",
        "tools": [
          "Bin base tool"
        ],
        "operation": "join"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Drip tray profile",
        "plane": {
          "origin": [
            0,
            -143,
            22
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -57,
            0
          ],
          [
            -57,
            43
          ],
          [
            57,
            43
          ],
          [
            57,
            0
          ]
        ],
        "ids": [
          "outerleft",
          "outerback",
          "outerright"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          57,
          0
        ],
        "end": [
          -57,
          0
        ],
        "through": [
          0,
          -57
        ],
        "id": "outerfront"
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -53,
            0
          ],
          [
            -53,
            39
          ],
          [
            53,
            39
          ],
          [
            53,
            0
          ]
        ],
        "ids": [
          "innerleft",
          "innerback",
          "innerright"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          53,
          0
        ],
        "end": [
          -53,
          0
        ],
        "through": [
          0,
          -53
        ],
        "id": "innerfront"
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 16,
        "operation": "new",
        "body_name": "Drip tray",
        "profiles": [
          {
            "point": [
              0,
              41.0
            ]
          }
        ]
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Tray base tool profile",
        "plane": {
          "origin": [
            0,
            -143,
            21
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -57,
            0
          ],
          [
            -57,
            43
          ],
          [
            57,
            43
          ],
          [
            57,
            0
          ]
        ],
        "ids": [
          "outerleft",
          "outerback",
          "outerright"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          57,
          0
        ],
        "end": [
          -57,
          0
        ],
        "through": [
          0,
          -57
        ],
        "id": "outerfront"
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 4,
        "operation": "new",
        "body_name": "Tray base tool"
      }
    },
    {
      "command": "solid.combine",
      "params": {
        "target": "Drip tray",
        "tools": [
          "Tray base tool"
        ],
        "operation": "join"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Perforated stainless grate profile",
        "plane": {
          "origin": [
            0,
            -143,
            65
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            -53,
            0
          ],
          [
            -53,
            39
          ],
          [
            53,
            39
          ],
          [
            53,
            0
          ]
        ],
        "ids": [
          "outerleft",
          "outerback",
          "outerright"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          53,
          0
        ],
        "end": [
          -53,
          0
        ],
        "through": [
          0,
          -53
        ],
        "id": "outerfront"
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -36,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -24,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -12,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          0,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          12,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          24,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          36,
          -30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -36,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -24,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -12,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          0,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          12,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          24,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          36,
          -18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -36,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -24,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -12,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          0,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          12,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          24,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          36,
          -6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -36,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -24,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -12,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          0,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          12,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          24,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          36,
          6
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -36,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -24,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -12,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          0,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          12,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          24,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          36,
          18
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -36,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -24,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -12,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          0,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          12,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          24,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          36,
          30
        ],
        "radius": 2.2
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 2,
        "operation": "new",
        "body_name": "Perforated stainless grate",
        "profiles": [
          {
            "point": [
              0,
              38
            ]
          }
        ]
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Rounded tray cap profile",
        "plane": {
          "origin": [
            112,
            -143,
            40
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -19.0,
          -27.0
        ],
        "p1": [
          19.0,
          27.0
        ],
        "radius": 15
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 16,
        "operation": "new",
        "body_name": "Rounded tray cap"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Louvred service panel profile",
        "plane": {
          "origin": [
            -122,
            143,
            173
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            0,
            1
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -47,
          -91
        ],
        "p1": [
          47,
          91
        ],
        "radius": 8
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          -62
        ],
        "p1": [
          31,
          -58
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          -47
        ],
        "p1": [
          31,
          -43
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          -32
        ],
        "p1": [
          31,
          -28
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          -17
        ],
        "p1": [
          31,
          -13
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          -2
        ],
        "p1": [
          31,
          2
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          13
        ],
        "p1": [
          31,
          17
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          28
        ],
        "p1": [
          31,
          32
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          43
        ],
        "p1": [
          31,
          47
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -31,
          58
        ],
        "p1": [
          31,
          62
        ],
        "radius": 1.5
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -38,
          -81
        ],
        "radius": 2.4
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          -38,
          81
        ],
        "radius": 2.4
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          38,
          -81
        ],
        "radius": 2.4
      }
    },
    {
      "command": "sketch.circle.center",
      "params": {
        "center": [
          38,
          81
        ],
        "radius": 2.4
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 3,
        "operation": "new",
        "body_name": "Louvred service panel",
        "profiles": [
          {
            "point": [
              43,
              0
            ]
          }
        ]
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 1",
        "base": [
          -99,
          -68,
          87
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          -99,
          -71,
          87
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 1"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          -102.3,
          -72,
          86.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 1"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 2",
        "base": [
          -99,
          -68,
          142
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          -99,
          -71,
          142
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 2"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          -102.3,
          -72,
          141.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 2"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 3",
        "base": [
          -99,
          -68,
          197
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          -99,
          -71,
          197
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 3"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          -102.3,
          -72,
          196.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 3"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 4",
        "base": [
          -99,
          -68,
          252
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          -99,
          -71,
          252
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 4"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          -102.3,
          -72,
          251.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 4"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 5",
        "base": [
          99,
          -68,
          87
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          99,
          -71,
          87
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 5"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          95.7,
          -72,
          86.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 5"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 6",
        "base": [
          99,
          -68,
          142
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          99,
          -71,
          142
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 6"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          95.7,
          -72,
          141.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 6"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 7",
        "base": [
          99,
          -68,
          197
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          99,
          -71,
          197
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 7"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          95.7,
          -72,
          196.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 7"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Zinc screw 8",
        "base": [
          99,
          -68,
          252
        ],
        "radius": 2.1,
        "height": 14,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "base": [
          99,
          -71,
          252
        ],
        "radius": 4.3,
        "height": 4,
        "axis": "Y",
        "operation": "join",
        "targets": [
          "Zinc screw 8"
        ],
        "name": "Screw pan head"
      }
    },
    {
      "command": "solid.box",
      "params": {
        "corner": [
          95.7,
          -72,
          251.3
        ],
        "length": 6.6,
        "width": 2.4,
        "height": 1.4,
        "operation": "cut",
        "targets": [
          "Zinc screw 8"
        ],
        "name": "Driver slot"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "S cable centerline profile",
        "plane": {
          "origin": [
            70,
            -75,
            9
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          52,
          94
        ],
        "through": [
          92,
          54
        ],
        "end": [
          132,
          94
        ],
        "id": "cable_a"
      }
    },
    {
      "command": "sketch.arc.three_point",
      "params": {
        "start": [
          132,
          94
        ],
        "through": [
          172,
          134
        ],
        "end": [
          212,
          94
        ],
        "id": "cable_b"
      }
    },
    {
      "command": "sketch.line",
      "params": {
        "points": [
          [
            212,
            94
          ],
          [
            212,
            66
          ]
        ],
        "ids": [
          "cable_end"
        ],
        "infer": false
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.pipe",
      "params": {
        "path_sketch": "S cable centerline profile",
        "path": [
          "cable_a",
          "cable_b",
          "cable_end"
        ],
        "diameter": 5,
        "operation": "new",
        "body_name": "Black S power cable"
      }
    },
    {
      "command": "sketch.create",
      "params": {
        "name": "Two pin plug profile",
        "plane": {
          "origin": [
            282,
            -30,
            3
          ],
          "x_dir": [
            1,
            0,
            0
          ],
          "y_dir": [
            0,
            1,
            0
          ]
        }
      }
    },
    {
      "command": "sketch.rectangle.rounded",
      "params": {
        "p0": [
          -12.0,
          -17.5
        ],
        "p1": [
          12.0,
          17.5
        ],
        "radius": 7
      }
    },
    {
      "command": "sketch.finish",
      "params": {}
    },
    {
      "command": "solid.extrude",
      "params": {
        "distance": 16,
        "operation": "new",
        "body_name": "Two pin plug"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plug pin 206",
        "base": [
          276,
          -64,
          11
        ],
        "radius": 2,
        "height": 18,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "solid.cylinder",
      "params": {
        "body_name": "Plug pin 218",
        "base": [
          288,
          -64,
          11
        ],
        "radius": 2,
        "height": 18,
        "axis": "Y",
        "operation": "new"
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Housing plinth",
          "Housing shell",
          "Housing upper shoulder",
          "Open brewing head",
          "Brewing head roof",
          "Drip tray",
          "Rounded tray cap"
        ],
        "color": "#101318",
        "pbr": {
          "metallic": 0,
          "roughness": 0.3,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Separate tank lid",
          "Tank lid grip",
          "Louvred service panel"
        ],
        "color": "#171a1f",
        "pbr": {
          "metallic": 0,
          "roughness": 0.55,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Brewing collar",
          "Bent chrome lever",
          "Left lever ball",
          "Right lever ball",
          "Plug pin 206",
          "Plug pin 218"
        ],
        "color": "#d5d9dd",
        "pbr": {
          "metallic": 1,
          "roughness": 0.12,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Internal chassis",
          "Shower screen",
          "Perforated stainless grate"
        ],
        "color": "#aeb4bb",
        "pbr": {
          "metallic": 1,
          "roughness": 0.25,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Zinc screw 1",
          "Zinc screw 2",
          "Zinc screw 3",
          "Zinc screw 4",
          "Zinc screw 5",
          "Zinc screw 6",
          "Zinc screw 7",
          "Zinc screw 8"
        ],
        "color": "#b0b5bc",
        "pbr": {
          "metallic": 1,
          "roughness": 0.32,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Black S power cable",
          "Two pin plug"
        ],
        "color": "#141414",
        "pbr": {
          "metallic": 0,
          "roughness": 0.8,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Studio floor"
        ],
        "color": "#e8e8e8",
        "pbr": {
          "metallic": 0,
          "roughness": 0.65,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Smoky D tank"
        ],
        "color": "#c2c6ca",
        "pbr": {
          "metallic": 0,
          "roughness": 0.05,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "appearance.assign",
      "params": {
        "bodies": [
          "Clear ribbed bin"
        ],
        "color": "#e4eff1",
        "pbr": {
          "metallic": 0,
          "roughness": 0.05,
          "dielectric_ior": 1.5
        }
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Open brewing head"
        ],
        "translate": [
          0,
          0,
          28
        ],
        "copy": false,
        "name": "Framing: Open brewing head"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Brewing collar"
        ],
        "translate": [
          0,
          0,
          28
        ],
        "copy": false,
        "name": "Framing: Brewing collar"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Shower screen"
        ],
        "translate": [
          0,
          0,
          28
        ],
        "copy": false,
        "name": "Framing: Shower screen"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Brewing head roof"
        ],
        "translate": [
          0,
          0,
          40
        ],
        "copy": false,
        "name": "Framing: Brewing head roof"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Bent chrome lever"
        ],
        "translate": [
          0,
          0,
          40
        ],
        "copy": false,
        "name": "Framing: Bent chrome lever"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Left lever ball"
        ],
        "translate": [
          0,
          0,
          40
        ],
        "copy": false,
        "name": "Framing: Left lever ball"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Right lever ball"
        ],
        "translate": [
          0,
          0,
          40
        ],
        "copy": false,
        "name": "Framing: Right lever ball"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Smoky D tank"
        ],
        "translate": [
          100,
          8,
          0
        ],
        "copy": false,
        "name": "Framing: Smoky D tank"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Separate tank lid"
        ],
        "translate": [
          100,
          8,
          22
        ],
        "copy": false,
        "name": "Framing: Separate tank lid"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Tank lid grip"
        ],
        "translate": [
          100,
          8,
          22
        ],
        "copy": false,
        "name": "Framing: Tank lid grip"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Clear ribbed bin"
        ],
        "translate": [
          -70,
          -15,
          0
        ],
        "copy": false,
        "name": "Framing: Clear ribbed bin"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Louvred service panel"
        ],
        "translate": [
          -110,
          15,
          0
        ],
        "copy": false,
        "name": "Framing: Louvred service panel"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Drip tray"
        ],
        "translate": [
          0,
          -34,
          0
        ],
        "copy": false,
        "name": "Framing: Drip tray"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Perforated stainless grate"
        ],
        "translate": [
          0,
          -34,
          0
        ],
        "copy": false,
        "name": "Framing: Perforated stainless grate"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Rounded tray cap"
        ],
        "translate": [
          38,
          -34,
          0
        ],
        "copy": false,
        "name": "Framing: Rounded tray cap"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Black S power cable"
        ],
        "translate": [
          50,
          8,
          0
        ],
        "copy": false,
        "name": "Framing: Black S power cable"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Two pin plug"
        ],
        "translate": [
          50,
          8,
          0
        ],
        "copy": false,
        "name": "Framing: Two pin plug"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plug pin 206"
        ],
        "translate": [
          50,
          8,
          0
        ],
        "copy": false,
        "name": "Framing: Plug pin 206"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Plug pin 218"
        ],
        "translate": [
          50,
          8,
          0
        ],
        "copy": false,
        "name": "Framing: Plug pin 218"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 1"
        ],
        "translate": [
          -28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 1"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 2"
        ],
        "translate": [
          -28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 2"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 3"
        ],
        "translate": [
          -28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 3"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 4"
        ],
        "translate": [
          -28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 4"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 5"
        ],
        "translate": [
          28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 5"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 6"
        ],
        "translate": [
          28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 6"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 7"
        ],
        "translate": [
          28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 7"
      }
    },
    {
      "command": "solid.move",
      "params": {
        "bodies": [
          "Zinc screw 8"
        ],
        "translate": [
          28,
          0,
          0
        ],
        "copy": false,
        "name": "Framing: Zinc screw 8"
      }
    }
  ]
}