Files
1993eg1 168a074c4c Add Shell command guide (#14332)
* Add Shell command guide

Adds a practical guide for Shell: Faces/Body, Thickness, Direction (Inside, Outside, Both) and Tangent chain, with an open-top box example. Tested on v0.40.0-rc.3.

* Round the rim after Shell

Advise rounding the edges around the opening after Shell, matching the features guide, since Shell can fail on a round tangent to the opening (#13910). Removed the untested wall-vs-fillet tip. Per CodeRabbit review.
2026-11-10 03:31:14 +00:00

2.2 KiB
Raw Permalink Blame History

Hollow out a solid to an even wall thickness, leaving the faces you pick open: a box with an open top, an enclosure, or a cup.

Before you start

  • You need a solid body.
  • Pick the faces to remove. They become the openings. Pick the top face of a block to get an open box.
  • To make a closed hollow part with no openings, click the body instead of a face.
  • Round or chamfer the edges around the opening after you shell, not before. Shell can fail on a round that runs into the opening.

Options

Choice in the dialog Meaning Example or reason to choose it
Faces/Body The faces to remove, or the body for a closed hollow part. The top face of a block for an open box.
Thickness The wall thickness. 0.125 in for a small enclosure.
Direction Inside keeps the outside size and builds the wall inward. Outside keeps the inside size and builds the wall outward. Both splits the wall across the original faces. Inside when the outside size is on the print. Outside when the inside size matters, such as a pocket a part must fit in.
Tangent chain (under Options) Also removes faces that run smoothly into the ones you picked, such as a fillet around the top edge. On by default. Turn it off to remove only the faces you clicked.

Try it: an open-top box

  1. Make a 4 in × 3 in × 2 in block (sketch a rectangle, Extrude 2 in).
  2. Click Shell and click the top face. Faces/Body shows 1 selected.
  3. Set Thickness to 0.125 in and Direction to Inside.
  4. Click OK. The block is an open box, still 4 in × 3 in × 2 in outside, with 0.125 in walls and floor.
  5. To try Outside, edit the shell and set Direction to Outside. The inside is now 4 in × 3 in and the outside grows by the wall.

Tips and common mistakes

  • Do pick Direction from the dimension that matters. Inside holds the outside size, Outside holds the inside size.
  • Do shell first and round the rim after. Shell then doesn't have to follow the rounds.
  • Don't click the body when you want an opening. Clicking the body makes a closed hollow part with no way in.

See also

{{#command solid.fillet}} rounds the rim after you shell. {{#command solid.extrude}} makes the block to start from.