mirror of
https://github.com/bherbruck/solidcraft.git
synced 2026-11-06 20:02:16 +00:00
Brennen Herbruck
45f8e2916e
cargo xtask kernel-cases --kernel both, solidcraft-cli built with smlib
at c65fc91a (fork bf7c272), SMLib through SOLIDCRAFT_KERNEL=smlib. 372
cases: default 235 pass, smlib 269. SMLib's gains are booleans (50 to
66), fillets (32 to 41), shell (5 to 11) and STEP import (13 to 17, its
solids now SMLib bodies); its losses are sweeps (54 to 51 pass, 15 not
supported yet on SMLib) and threads (17 fail, of which the default kernel
hangs on 4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
476 KiB
476 KiB
Kernel regression rig
Generated by cargo xtask kernel-cases. Every geometry case the old kernel (truck) got wrong, as an issue, a PR or a crash report recorded it, is a use case in tests/kernel-cases/ with its own right answer: numbers from analysis or a hand calculation (analytic) where the geometry has them, and otherwise the invariants (invariants): the operation succeeds, or refuses cleanly where that is the right answer; each body is one closed shell that passes the record's structure and geometry checks and, in builds with SMLib, SMLib's own check; the expected face, edge and vertex counts. Never a kernel's output, and never a commercial kernel's.
Each kernel is graded against the case, never against the other kernel. default is the kernel SolidCraft ships today; smlib runs with SOLIDCRAFT_KERNEL=smlib. A failing case stays failing until its kernel is fixed; there is no workaround on SolidCraft's side. See tests/kernel-cases/README.md for the format.
Coverage
| Area | Cases | default | smlib |
|---|---|---|---|
| booleans | 89 | 32 fail, 2 hang, 50 pass, 5 unsupported | 18 fail, 2 hang, 66 pass, 3 unsupported |
| crashes | 10 | 3 fail, 2 hang, 5 pass | 2 fail, 2 hang, 6 pass |
| fillets | 50 | 9 fail, 32 pass, 9 unsupported | 8 fail, 41 pass, 1 unsupported |
| import | 23 | 1 crash, 9 fail, 13 pass | 4 fail, 17 pass, 2 unsupported |
| sheet-metal | 57 | 2 fail, 55 pass | 3 fail, 54 pass |
| shell | 18 | 13 fail, 5 pass | 6 fail, 11 pass, 1 unsupported |
| sweeps | 83 | 1 crash, 22 fail, 6 hang, 54 pass | 1 crash, 15 fail, 1 hang, 51 pass, 15 unsupported |
| tessellation | 14 | 3 fail, 11 pass | 1 fail, 13 pass |
| threads | 28 | 14 fail, 4 hang, 10 pass | 17 fail, 1 hang, 10 pass |
372 cases from 473 sources; answers: 324 analytic, 48 invariants.
Results
| Case | Sources | What went wrong | Answer | default | smlib |
|---|---|---|---|---|---|
| booleans/1107-join-hollow-hub-with-nine-blades | tangency-labs/solidcraft#1107 | a hollow hub (tube r 21.5..23) joined with nine disjoint blades whose roots lie wholly in the wall: one valid solid, the cavity stays the hub's. Blades here are r1 round bars (the report's are lofted fan blades) | analytic | FAIL: record_valid the operation failed: pcurve of loop 4 use 0 (Some([17.082163710380097, -15.401288354283027, 9.42459 (want ok); smlib_check the operation failed: pcurve of loop 4 use 0 (Some([17.082163710380094, -15.401288354283022, 9.42459 (want ok) | pass |
| booleans/114-extrude-join-on-curved-body-coincident-wall | tangency-labs/solidcraft#114 | extruding a profile onto a cylinder with zero taper: the new wall is the old wall continued (coincident cylindrical faces), join failed | analytic | pass | pass |
| booleans/1140-hollow-lofted-tube-cut-in-half-and-joined | tangency-labs/solidcraft#1140 | a spiral round tube (radius growing 76 to 210 mm over one turn, 12 mm wall) built as 8 lofted bands, each minus a lofted bore, cut in half through the axis plane z=0 and the halves joined: must give one body | invariants | FAIL: record_valid the operation failed: pcurve of loop 0 use 1 (Some([95.80000016013133, -3.428471146999651e-8, 75.786 (want ok) | pass |
| booleans/1195-text-cut-into-plate | tangency-labs/solidcraft#1195 | text cut into a plate: a boundary curve's end meeting a point whatever its parameter (glyph outlines through a text cut) | invariants | pass | pass |
| booleans/1279-cut-with-tool-cylinder-coaxial-with-hole | tangency-labs/solidcraft#1279 | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | FAIL: step 4 (solid.cylinder): SMLib boolean: SMLib's check refuses the result: 6 failed tests: SmFace::Test #33 Face has Coincident Edges: Face has Coincident Edges. |
| booleans/13-split-body-by-a-plane | tangency-labs/solidcraft#13 | split a body by a plane (the split-by-a-face path tripped a debug assertion, 'Two same vertices cannot construct an edge') | analytic | pass | pass |
| booleans/1355-concentric-hole-through-drilled-recess | tangency-labs/solidcraft#1355 tangency-labs/solidcraft#1736 | a drilled O8.5 recess (118 deg drill point) in a plate, then a O4 hole through its centre: the second cut 'does not work' | analytic | pass | pass |
| booleans/1647-box-cylinder-general-intersect | tangency-labs/solidcraft#1647 | a box and a cylinder in general position (nothing coincident or tangent): Intersect refused as an implausible volume | analytic | pass | pass |
| booleans/1649-crossing-cylinders-union-far-from-origin | tangency-labs/solidcraft#1649 | union of two crossing cylinders, both moved (1000,-700,300) mm: volume lost with position | analytic | FAIL: record_valid geometry: portable B-rep: edge 8: curve end misses its end vertex by 0.0023531882294339375 mm (toler (want ok) | pass |
| booleans/168-rim-touching-coin-along-a-circle-only | tangency-labs/solidcraft#168 | a rim on a coin's top face that meets the coin along one circle only (no shared area, no shared volume): it must not be joined into it | analytic | FAIL: smlib_check SMLib check: 3 failed tests: SmEdgeuse::Test #11 Bad UVTrimCurve: Edgeuse->UVTrimCurve has zero leng (want ok); body_count 1 (want 2) | FAIL: shells Coin: 2 (want 1); record_valid the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); smlib_check the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); body_count 1 (want 2) |
| booleans/1717-two-overlapping-sphere-cuts | tangency-labs/solidcraft#1717 tangency-labs/solidcraft#2158 | a second sphere cut overlapping an earlier sphere cut on a box edge: 'no result' | analytic | FAIL: step 3 (solid.sphere): boolean Cut: the operation failed: no result | pass |
| booleans/1730-cut-short-of-far-face-keeps-skin | tangency-labs/solidcraft#1730 | an extrude cut whose profile stops 0.25 mm short of a wall's far face must leave that skin (it was grown through) | analytic | pass | pass |
| booleans/1858-shallow-cuts-after-earlier-pocket | tangency-labs/solidcraft#1765 tangency-labs/solidcraft#1858 | two 1.5 mm circular cuts overlapping an earlier 0.75 mm pocket (timeline roll-back, insert, redefine): the cut came out empty | analytic | pass | pass |
| booleans/1865-tube-and-sector-meeting-along-cylinder-walls | tangency-labs/solidcraft#1865 tangency-labs/solidcraft#1910 tangency-labs/solidcraft#1983 tangency-labs/solidcraft#2034 | a union of two solids that meet along cylindrical faces: a tube (r10..12, z 0..20) and a 90 deg ring sector (same radii, z 10..30) whose curved faces are the tube's own, overlapping it axially; refused ('planar faces only') or, by the faceted fallback, left 1710 faceted faces | analytic | pass | pass |
| booleans/1910-coaxial-cylinders-intersect | tangency-labs/solidcraft#1910 tangency-labs/solidcraft#1865 | intersection of two cylinders of one radius on one axis (z 0..30 and 22..46) whose round sides lie in each other over the shared 8 mm | analytic | not supported yet: step 3 (solid.combine): boolean Intersect: the operation failed: no result; the operation failed: not supported yet: the exact fallback for where the bodies mee | pass |
| booleans/1927-delete-pocket-face-restores-plate | tangency-labs/solidcraft#1927 | Delete Face on the 0.5 mm deep O15 recess of a plate: the face around the gap must keep its surface | analytic | pass | pass |
| booleans/1949-extrude-side-drawn-in-collinear-pieces | tangency-labs/solidcraft#1949 | a profile side drawn as two collinear lines extrudes into one flat face, not two with an edge between them | analytic | pass | pass |
| booleans/1949-tapered-extrude-side-in-collinear-pieces | tangency-labs/solidcraft#1949 | with a taper too, a side drawn in two collinear pieces is one face | analytic | pass | pass |
| booleans/1984-near-coaxial-pin-overlaps-bore-wall | tangency-labs/solidcraft#1984 | the overlap of a pin 0.00056 mm off the axis of a bore of its own radius (r=3, 9.65 long): a thin crescent. The report's STEP round trip is left out; this is the geometry | analytic | pass | pass |
| booleans/1984-rivet-with-flush-heads-a-hair-off-its-hole | tangency-labs/solidcraft#1984 | a rivet (shank r=2, heads r=4 flat on both faces of a 1.5 mm sheet) 0.004 mm off the axis of its hole: overlap with the sheet is the shank's crescent; the heads touch the sheet faces over an area but add no volume | analytic | FAIL: body_count 0 (want 1); volume_mm3 0 (want 0.024) | pass |
| booleans/2003-mirror-feature-join-flush-with-mirror-plane | tangency-labs/solidcraft#2003 | mirror a feature with Join: the image meets its original along the mirror plane and the join was refused for its volume | analytic | pass | pass |
| booleans/2008-coaxial-cylinders-join-one-wall | tangency-labs/solidcraft#2008 tangency-labs/solidcraft#1986 | a join of coaxial cylinders of one radius whose walls overlap leaves one cylindrical wall in one face (it came out as a stack of faces, so a later chamfer on its top edge refused) | analytic | pass | pass |
| booleans/2055-countersink-holes-from-several-sketch-points | tangency-labs/solidcraft#2055 | a countersunk hole at two sketch points at once, in a design with several bodies: 'there is no body to cut or intersect' (one point works) | analytic | pass | pass |
| booleans/2076-rectangular-pattern-of-cylinder-join | tangency-labs/solidcraft#2076 | a rectangular pattern of a cylinder join (pin-fin plate) scales quadratically in time | analytic | pass | pass |
| booleans/2464-extrude-join-leaves-hidden-body-alone | tangency-labs/solidcraft#2464 tangency-labs/solidcraft#2465 | an Extrude Join onto a plate with a hidden coincident copy: the hidden body must not be joined in | analytic | FAIL: body_count 1 (want 2); volume_mm3 8816 (want 16816) | FAIL: body_count 1 (want 2); volume_mm3 8816 (want 16816) |
| booleans/2524-circular-pattern-of-bore-cut | tangency-labs/solidcraft#2524 | a circular pattern (count 2, 360 deg, about Y) of a cut made off-axis: 'boolean Cut: no result' | analytic | pass | pass |
| booleans/2564-joined-side-run-wrapping-past-loop-start | tangency-labs/solidcraft#2564 tangency-labs/solidcraft#1949 | an extrude of an outline whose bottom side is drawn as two collinear pieces that wrap past the loop's first segment ((10,0)->(20,0) ... (0,0)->(10,0)): the bottom is one face | analytic | pass | pass |
| booleans/2580-clip-round-small-hole-of-long-plate | tangency-labs/solidcraft#2580 tangency-labs/solidcraft#2579 | a 16 mm box cut out round a small (r 1.8) hole of a 3 m long, 2 mm plate keeps the hole in both faces | analytic | pass | pass |
| booleans/2583-taper-side-drawn-in-collinear-pieces | tangency-labs/solidcraft#2583 | a tapered extrude of a 20x10 rectangle whose bottom side is drawn as two collinear pieces: the sloped side is one face | analytic | pass | pass |
| booleans/2601-taper-with-start-offset | tangency-labs/solidcraft#2601 | a tapered extrude whose start is offset along the sketch normal (the app says: not supported yet: taper with two-sided, symmetric or offset extents) | analytic | pass | pass |
| booleans/2754-taper-extrude-line-arc-corner | tangency-labs/solidcraft#2754 | a tapered extrude of a profile in which an arc meets a line at a corner (a half disc) | analytic | not supported yet: step 5 (solid.extrude): not supported yet: tapered profiles where an arc meets another edge at a corner | FAIL: step 5 (solid.extrude): SMLib extrude: SMLib's result is not a closed solid |
| booleans/2755-mirror-copy-keeps-seed-targets | tangency-labs/solidcraft#2755 | the mirror copy of a primitive cut changes only the seed's targets, not a body the seed was told to leave alone | analytic | pass | pass |
| booleans/2755-pattern-copies-keep-seed-targets | tangency-labs/solidcraft#2755 | copies of a primitive cut made with a rectangular pattern change only the seed's targets, not a body the seed was told to leave alone | analytic | pass | pass |
| booleans/2801-prism-edge-in-round-cornered-slab-end-face | tangency-labs/solidcraft#2801 | a join of a triangular prism and a thin slab with rounded corners (r 4.9) that share their bottom plane, the prism's edge in that plane lying in the slab's end face | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 3 (Some([5.099999999999999, -67.0, 2.220446049250313e-16] (want ok); smlib_check the operation failed: pcurve of loop 0 use 3 (Some([5.099999999999999, -67.0, 2.220446049250313e-16] (want ok) | FAIL: step 11 (solid.combine): SMLib boolean: SMLib's check refuses the result: 2 failed tests: SmTrimmingTools::Test #0 Edge/Edge Gap: Gap between edge endPoints exc |
| booleans/2810-taper-extrude-arcs-meeting-at-corners | tangency-labs/solidcraft#2810 tangency-labs/solidcraft#2813 | a tapered extrude of a loop of arcs on three circles meeting at sharp corners (a circle with a lobe on each side); the walls must meet at the corners | analytic | pass | FAIL: faces 14 (want 6) |
| booleans/2826-cut-up-to-face-leaves-no-skin | tangency-labs/solidcraft#2826 tangency-labs/solidcraft#2827 | a cut that ends exactly in a face of its target (the plate's top face) must open the hole, not leave a zero-thickness skin over it | analytic | pass | pass |
| booleans/2896-join-arm-end-into-ring-wall | tangency-labs/solidcraft#2896 | a join of a ring (R30/R24, 6 tall) and an arm with a convex R5 end whose tip runs 0.1 mm into the ring's outer wall (curved faces that nearly graze) | analytic | pass | pass |
| booleans/2896-join-arm-end-near-ring-wall-gap | tangency-labs/solidcraft#2896 | a join of a ring and an arm whose R5 convex tip stops 0.01 mm short of the ring's outer wall: nothing overlaps, so nothing fuses | analytic | FAIL: shells Ring: 2 (want 1); body_count 1 (want 2) | FAIL: shells Ring: 2 (want 1); body_count 1 (want 2) |
| booleans/2904-countersunk-hole-with-distant-body | tangency-labs/solidcraft#2904 | a countersunk hole in a small plate, near a rounded corner, while an unrelated body sits 120 mm away: only the plate may change, and the countersink must be complete | analytic | pass | pass |
| booleans/2928-join-cap-touching-lips-with-offset-walls | tangency-labs/solidcraft#2928 | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | HANG: no result after 180 s | FAIL: volume_mm3 1066.017651 (want 769.468975) |
| booleans/3027-pin-seated-line-to-line-in-bore | tangency-labs/solidcraft#3027 | a pin (r4) seated line to line in a bore (r4, exactly coaxial) of a bush: the two cylinder walls coincide | analytic | pass | pass |
| booleans/307-tangent-hole-contacts-ring-against-grid | tangency-labs/solidcraft#307 | four pairs of through holes whose circles touch at exactly one point (ring holes at (+-25,0),(0,+-25) against grid holes at (+-15,0),(0,+-15)); the symmetric contacts must be treated alike and split no cylinder face | analytic | FAIL: smlib_check SMLib check: 4 failed tests: SmFace::Test #32 Face has Coincident Vertices: Face has Coincient Verti (want ok) | not supported yet: step 6 (solid.cylinder): SMLib boolean: export: SMLib export: not supported yet: a solid touching itself along an edge |
| booleans/308-blind-cut-ending-inside-a-cylinder | tangency-labs/solidcraft#308 | a hinge leaf (40x30x3) with a joined r4 knuckle cylinder along X and a O4 pin hole, then a 3.3 mm blind cut of x 12..28, y 29..40 ending inside the cylinder: the result grew a sphere and a freeform face | analytic | pass | pass |
| booleans/3092-ring-on-perforated-plate | tangency-labs/solidcraft#3092 tangency-labs/solidcraft#2844 | a ring (r 19.6/20.8, 20 tall) joined onto the top of an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes: the ring's foot crosses many hole edges | analytic | FAIL: smlib_check SMLib check: 1 failed tests: SmFace::Test #38 Intersecting Face Loops: Face Loops must be disjoint i (want ok) | pass |
| booleans/3175-cut-beside-sealed-void | tangency-labs/solidcraft#3175 | a cut over the bottom edge of a revolved cylinder that holds a sealed spherical void on its axis: the body must not come out empty or refused | analytic | pass | pass |
| booleans/3243-rim-and-rounded-tooth-join | tangency-labs/solidcraft#3243 | a join of a cylindrical rim (r 15.27..16.65, to z=5) and a rounded tooth trimmed to the same two cylinders that overlaps it by 0.01 mm in Z | invariants | FAIL: step 10 (solid.combine): boolean Union: the operation failed: no result | pass |
| booleans/3303-inward-cut-of-frustum-top-face | tangency-labs/solidcraft#3303 tangency-labs/solidcraft#3309 | cutting the complete circular top face of a widening conical frustum inward: the cylindrical tool touches the cone only at its rim | analytic | not supported yet: step 8 (solid.extrude): boolean Cut: the operation failed: no result; the operation failed: coincident faces were left in place: pushing them apart would change | pass |
| booleans/3327-cut-ending-flush-with-side-wall | tangency-labs/solidcraft#3327 tangency-labs/solidcraft#2963 | a cut whose end face lies exactly in a side wall of its target (a window notch): the cut must open the wall, with no skin left in it | analytic | pass | pass |
| booleans/3378-circular-pattern-of-join-that-merged-targets | tangency-labs/solidcraft#3378 | a circular pattern of a join whose two targets (rim and hub) were merged into one body by that join | analytic | pass | pass |
| booleans/3379-circular-pattern-of-thin-spoke-on-ring | tangency-labs/solidcraft#3379 | a circular pattern (count 5) of a spoke thinner than the ring it joins (faces 0.5 mm inside the rim and hub faces) | analytic | pass | pass |
| booleans/3383-combine-tool-into-rotated-occurrence | tangency-labs/solidcraft#3383 | a root body joined into a body inside a component whose occurrence is turned a quarter turn: the tool must stay where it is in the world | analytic | FAIL: shells Plate: 2 (want 1); volume_mm3 17000 (want 16750); bbox.min [-20, -10, -20] (want [-20, -10, -25]); bbox.max [20, 25, 20] (want [20, 5, 20]) | FAIL: shells Plate: 2 (want 1); volume_mm3 17000 (want 16750); bbox.min [-20, -10, -20] (want [-20, -10, -25]); bbox.max [20, 25, 20] (want [20, 5, 20]) |
| booleans/3447-split-along-plane-of-a-face | tangency-labs/solidcraft#3447 tangency-labs/solidcraft#2979 | split body where the splitting plane contains an end face (with a boss on it and an R1 fillet on the face's edge) | analytic | FAIL: step 4 (solid.split_body): the section through the body does not close | FAIL: step 4 (solid.split_body): the section through the body does not close |
| booleans/3455-join-of-64-separate-pegs | tangency-labs/solidcraft#3455 | one combine of 64 separate pegs that do not touch: 36 s on truck, growing 4-9x per doubling; must finish in seconds | analytic | pass | HANG: no result after 180 s |
| booleans/3456-deep-cut-through-drilled-taper-leaves-base | tangency-labs/solidcraft#3456 tangency-labs/solidcraft#3497 | a deep cut that removes everything above z=2 of a tapered body with nine through-bores, leaving the 2 mm drilled base | analytic | pass | pass |
| booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs | tangency-labs/solidcraft#3460 | Combine cut (keep tools) of an enclosure by its lid whose insert is flush with the inner walls and carries four small half-moon tabs that cross them; the cut must not return the target unchanged | analytic | pass | pass |
| booleans/3485-boss-joined-on-rod-top-keeps-side-whole | tangency-labs/solidcraft#3485 tangency-labs/solidcraft#3062 | a boss joined on a rod's top face (the join runs the boss on into the rod); the rod's side must stay one face, not seamed at the boss's foot | analytic | pass | pass |
| booleans/3497-collinear-cylinders-partial-height-intersection | tangency-labs/solidcraft#3497 tangency-labs/solidcraft#3456 | intersection of two collinear R2 H12 cylinders offset by 0.75 along the axis (curved walls coincide over part of the height) | analytic | not supported yet: step 3 (solid.combine): boolean Intersect: the operation failed: no result; the operation failed: not supported yet: the exact fallback for where the bodies mee | pass |
| booleans/3497-pin-overlapping-bore-by-20-microns | tangency-labs/solidcraft#3497 tangency-labs/solidcraft#3456 | a pin r=3.02 intersected with a tube whose bore is r=3: a thin annulus (0.02 mm overlap on a curved wall) | analytic | pass | pass |
| booleans/3526-intersect-keeps-every-lump | tangency-labs/solidcraft#3526 tangency-labs/solidcraft#3888 | intersect of a two-lump target (two spheres joined while apart) with a box holding the bottom half of each | analytic | FAIL: body_count 0 (want 1); shells 0 (want 2); volume_mm3 0 (want 268.0826) | pass |
| booleans/3604-cut-with-g2-swept-tool-along-projected-edge | tangency-labs/solidcraft#3604 tangency-labs/solidcraft#3613 | cut of a box by a swept G2 corner-removal tool along a projected edge chain (left-rear corner; the symmetric front-left chain works) | invariants | FAIL: step 13 (solid.combine): boolean Cut: the operation failed: no result | FAIL: step 12 (solid.sweep): the path curves are not connected end to end |
| booleans/3612-circular-pattern-of-spoke-tangent-to-hub | tangency-labs/solidcraft#3612 tangency-labs/solidcraft#3379 | a spoke whose inner face x=12 is exactly tangent to the hub cylinder r=12 (line contact), joined to the rim, patterned 5 times around the hub's axis | analytic | FAIL: step 5 (solid.pattern.circular): lumps: shell boundaries intersect or touch; cavity ownership is ambiguous | FAIL: step 4 (solid.box): invalid input: native B-rep: portable B-rep: face 3 loop 1: loop encloses no (u, v) area (signed area 0) |
| booleans/3633-sphere-intersect-pyramid-apex-at-centre | tangency-labs/solidcraft#3633 tangency-labs/solidcraft#3682 | a sphere r=10 intersected with a square pyramid whose apex is the sphere's centre and whose sides lie in the planes of the sphere primitive's patch edges | analytic | FAIL: step 9 (solid.combine): boolean Intersect: the operation failed: no result | not supported yet: step 8 (solid.loft): not supported yet: SMLib loft to a point |
| booleans/3652-mirror-of-a-mirror-feature | tangency-labs/solidcraft#3652 | mirror a Mirror feature (the first mirror's hole) about a second plane: 'Mirror1 cannot be patterned or mirrored yet' | analytic | FAIL: step 7 (solid.mirror): Mirror1 cannot be patterned or mirrored yet | FAIL: step 7 (solid.mirror): Mirror1 cannot be patterned or mirrored yet |
| booleans/3665-join-extrude-column-on-floor-and-curved-walls | tangency-labs/solidcraft#3665 tangency-labs/solidcraft#3666 | a join extrude of a column standing on a channel's flat floor and lying along both its curved walls (column circle tangent to both walls) | analytic | FAIL: smlib_check SMLib check: 2 failed tests: SmFace::Test #32 Face has Coincident Vertices: Face has Coincient Verti (want ok) | not supported yet: step 10 (solid.extrude): SMLib boolean: export: SMLib export: not supported yet: a solid touching itself along an edge |
| booleans/3671-intersect-tool-in-top-face-beside-rib | tangency-labs/solidcraft#3671 | intersect with a tapered pocket tool whose top face lies in the block's top face, 0.5 mm short of a rib | analytic | pass | pass |
| booleans/3702-board-in-cavity-of-filleted-rim-case | tangency-labs/solidcraft#3702 | a 0.2 mm board lying in the open cavity of a case with a filleted circular rim: cutting it from the case must leave the case unchanged (it was taken for wholly inside) | analytic | pass | pass |
| booleans/3703-two-face-extrudes-join-keep-the-step | tangency-labs/solidcraft#3703 | two joined face extrudes on one box (top face, then the right side face): the stepped shape must stay | analytic | pass | pass |
| booleans/3729-extrude-to-point-on-step-edge | tangency-labs/solidcraft#3729 | extrude to a point lying exactly on the top edge of a step: must end at the plane z=20 through the point |
analytic | FAIL: volume_mm3 5089.982614 (want 5070.6858); bbox.max [10, 10, 22.732051] (want [10, 10, 20]) | FAIL: volume_mm3 5089.997564 (want 5070.6858); bbox.max [10, 10, 22.732051] (want [10, 10, 20]) |
| booleans/3782-emboss-on-cylinder-pick-on-far-half | tangency-labs/solidcraft#3782 tangency-labs/solidcraft#3425 | emboss on a cylinder with the face pick on the half of the wall opposite the sketch | invariants | FAIL: step 5 (solid.emboss): invalid input: cylinder emboss: saved selection no longer identifies the sketch's cylindrical face | FAIL: step 5 (solid.emboss): invalid input: cylinder emboss: saved selection no longer identifies the sketch's cylindrical face |
| booleans/3816-circular-pattern-of-body-about-offset-axis | tangency-labs/solidcraft#3816 | circular pattern of a body about an axis {origin,dir} that does not pass through the world origin | analytic | pass | pass |
| booleans/3830-split-cup-by-extended-spline-surface | tangency-labs/solidcraft#3830 | split a thin-walled cup (shell of a d30 cylinder) with a surface body: an extruded spline surface, extended at both ends | analytic | HANG: no result after 180 s | HANG: no result after 180 s |
| booleans/3841-join-touching-along-one-circle-only | tangency-labs/solidcraft#3841 tangency-labs/solidcraft#168 | Join of a ring (r10..15) onto a coin (r10) that touch only along a circle: no fusion that moves the ring | invariants | FAIL: smlib_check SMLib check: 3 failed tests: SmEdgeuse::Test #11 Bad UVTrimCurve: Edgeuse->UVTrimCurve has zero leng (want ok); body_count 1 (want 2) | FAIL: shells Coin: 2 (want 1); record_valid the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); smlib_check the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); body_count 1 (want 2) |
| booleans/3850-cross-cut-touching-round-side | tangency-labs/solidcraft#3850 tangency-labs/solidcraft#3741 | a O50 x 50 cylinder with a 25 mm square through-hole, then a cross cut by a O40 circle split into two halves by a line (both halves picked, merged into one round tool whose end face x=25 touches the cylinder's side along y=0): the result must be one shell, not a good shell plus a zero-area one | analytic | FAIL: record_valid the operation failed: lumps: cannot mesh a complete shell boundary (want ok); smlib_check the operation failed: lumps: cannot mesh a complete shell boundary (want ok); shells 2 (want 1) | pass |
| booleans/3850-hole-through-wall-after-cross-cut | tangency-labs/solidcraft#3850 tangency-labs/solidcraft#3741 | the O10 through-all hole across the wall of the body from the cross-cut case (the report's failing step: 'lumps: cannot mesh a complete shell boundary') | analytic | FAIL: step 17 (solid.extrude): lumps: cannot mesh a complete shell boundary | pass |
| booleans/3887-ring-standing-on-perforated-plate | tangency-labs/solidcraft#3887 tangency-labs/solidcraft#2844 | a ring (r19.6/20.8, 20 tall) joined onto an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes; the ring's foot crosses the holes | analytic | FAIL: smlib_check SMLib check: 1 failed tests: SmFace::Test #38 Intersecting Face Loops: Face Loops must be disjoint i (want ok) | pass |
| booleans/3968-hole-as-wide-as-a-cones-top | tangency-labs/solidcraft#3968 | a hole of diameter 10 drilled into the top of a truncated cone whose top is also diameter 10 (the hole wall meets the cone at the top rim) | analytic | FAIL: step 5 (solid.hole): boolean Cut: the operation failed: no result | pass |
| booleans/4008-symmetric-revolve-cut-ends-in-side-face | tangency-labs/solidcraft#4008 | symmetric 180 deg revolve cut about a vertical edge of a block, the tool's end faces lying in the block's side face | analytic | FAIL: step 8 (solid.revolve): the cut could not be computed reliably: it would change the body away from the tool, at (-1.557, 12.991, 16.000) (outside the tool's reg | pass |
| booleans/4011-mirror-of-cut-under-wall | tangency-labs/solidcraft#4011 | a blind hole mirrored to a spot where half its top disc lies under a wall's foot | analytic | pass | pass |
| booleans/4058-walls-joined-flush-round-a-floor | tangency-labs/solidcraft#4058 tangency-labs/solidcraft#4059 | a 10 mm ring (rounded corners) extruded 40 mm as a Join round a floor's outline: it touches the floor back to back on its flat sides and rounded corners | analytic | FAIL: step 14 (solid.extrude): boolean Union: the operation failed: no result | pass |
| booleans/4095-slab-cut-standing-off-a-bore-r10 | tangency-labs/solidcraft#4095 | a slab cut whose +x face stands 6.73e-05 mm (0.90 x the coincidence tolerance 7.48e-05) off a through-bore's wall (R=10), beside the bore | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([-10.0000673497, -8.0, 20.0]) to Some([-10.000067 (want ok); smlib_check SMLib check: 2 failed tests: SmFace::Test #32 Face has Coincident Vertices: Face has Coincient Verti (want ok) | pass |
| booleans/4095-slab-cut-standing-off-a-bore-r15 | tangency-labs/solidcraft#4095 | a slab cut whose +x face stands 6.60e-05 mm (0.60 x the coincidence tolerance 1.10e-04) off a through-bore's wall (R=15), beside the bore | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([-15.000066, -8.0, 20.0]) to Some([-15.000066, -8 (want ok); smlib_check SMLib check: 2 failed tests: SmFace::Test #32 Face has Coincident Vertices: Face has Coincient Verti (want ok) | pass |
| booleans/423-through-all-cut-must-not-reach-behind-sketch-plane | tangency-labs/solidcraft#423 | a one-sided Through All cut from a sketch plane at x=98 toward -x, with its wall 0.0022 mm from a face of a notch beyond the plane: the cut must remove nothing at x > 98 | analytic | pass | pass |
| booleans/451-cut-block-crossing-hollow-sphere-tool | tangency-labs/solidcraft#451 | a 12x8x8 block (x 8..20) crossing the inner sphere r=18.5 of a hollow spherical-shell tool: the cut keeps the part inside r=18.5 | analytic | FAIL: step 9 (solid.combine): boolean Cut: the operation failed: no result | FAIL: step 9 (solid.combine): lumps: cannot mesh a complete shell boundary |
| booleans/451-cut-block-inside-hollow-sphere-tool | tangency-labs/solidcraft#451 | a block wholly inside the void of a hollow spherical-shell tool (r 18.5 to 40): cutting leaves it untouched, the tool never reaches it | analytic | pass | FAIL: step 9 (solid.combine): lumps: cannot mesh a complete shell boundary |
| booleans/500-coaxial-cylinder-cut-from-thin-disc | tangency-labs/solidcraft#500 | a radius 20 cylinder cut out of a coaxial radius 40 disc spanning x -1..1 lost about 2.6% of the volume | analytic | pass | pass |
| booleans/559-through-hole-into-shelled-box-rim | tangency-labs/solidcraft#559 | a 1 mm through-all hole straight down into the 2 mm rim of a shelled box: 'implausible volume' / no result | analytic | pass | pass |
| booleans/562-press-pull-floor-beside-rounds | tangency-labs/solidcraft#562 | Press Pull of a floor whose neighbours are rounds (vertical corner fillets): 'a neighbouring edge is not straight' | analytic | pass | pass |
| booleans/831-tapered-extrude-d-shape-arc-meets-line | tangency-labs/solidcraft#831 | tapered extrude of a D shape (an arc meeting a line at a sharp corner): refused as 'tapered profiles where an arc meets another edge at a corner' | analytic | not supported yet: step 5 (solid.extrude): not supported yet: tapered profiles where an arc meets another edge at a corner | pass |
| booleans/831-tapered-extrude-text-glyph | tangency-labs/solidcraft#831 | tapered extrude of a text glyph (Bezier outline): refused with a misleading 'mixing lines and arcs' error | invariants | pass | pass |
| crashes/1219-bore-fillet-then-grooves-cut | tangency-labs/solidcraft#1219 | 24 small grooves cut into a bore whose top edge has an unrelated 1 mm fillet: 73 s and 24 boolean retries instead of 0.2 s | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 1 (Some([-68.19934052346665, 0.29992031010887626, 19.0003 (want ok); smlib_check SMLib check: 1 failed tests: SmBrep::Test #61 Valid: Bad Edge fails pE->ValidateGeometry(FALSE) chec (want ok) | pass |
| crashes/140-join-pad-hanging-past-the-edge | tangency-labs/solidcraft#140 | a join whose tool face lies flat on the target but only half backed by it (the pad hangs 10 mm past the edge) must not add material | analytic | pass | pass |
| crashes/1985-step-export-enclosure-screw-hole | tangency-labs/solidcraft#1985 tangency-labs/solidcraft#2243 | a small enclosure (rounded box, inner cut, corner gusset with a screw hole, two standoffs, USB cut-out) whose STEP export never finished (the export meshes its own file back) | invariants | pass | pass |
| crashes/2243-step-export-flanged-enclosure | tangency-labs/solidcraft#2243 tangency-labs/solidcraft#1985 | a flanged enclosure with two standoffs and no screw hole whose STEP export also never finished | invariants | pass | pass |
| crashes/2357-join-ring-of-90-cylinder-segments | tangency-labs/solidcraft#2357 | one join of a ring of 90 straight cylinder segments, each overlapping its neighbour at a 4 degree joint: a caught truck panic, then a refusal after 21 minutes | invariants | HANG: no result after 180 s | HANG: no result after 180 s |
| crashes/2992-join-disk-and-36-twisted-loft-blades | tangency-labs/solidcraft#2992 | join of a disk and a circular pattern of 36 twisted lofted blades (embedded 2.54 mm in the disk): blocks for minutes | invariants | HANG: no result after 180 s | HANG: no result after 180 s |
| crashes/3540-cut-with-coincident-cylinder-face | tangency-labs/solidcraft#3540 | a groove cut whose r33 arcs lie exactly on the r33 cylinder of an earlier slot cut and overlap it in Z: minutes of CPU | analytic | pass | pass |
| crashes/3685-delete-fillet-face-beside-seam | tangency-labs/solidcraft#1559 tangency-labs/solidcraft#3685 | Delete Face on a fillet face next to a face whose edge a boolean/fillet rebuilt as an intersection curve: must never panic (truck: not implemented: intersection curve cannot connect by homotopy) | analytic | pass | pass |
| crashes/4092-loft-ribs-rounded-pad-union-panics | tangency-labs/solidcraft#4092 | join extrude of a rounded pad over a lofted body with ring and ribs: repeated truck intersection_curve panics, then 'boolean Union: no result' | invariants | FAIL: step 50 (solid.extrude): boolean Union: the operation failed: no result | FAIL: step 50 (solid.extrude): SMLib boolean: operation: SMLib failed (status 1001) |
| crashes/4092-loft-ribs-rounded-pad-union-reduced | tangency-labs/solidcraft#4092 | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | FAIL: step 40 (solid.extrude): boolean Union: the operation failed: no result | FAIL: step 40 (solid.extrude): SMLib boolean: operation: SMLib failed (status 1001) |
| fillets/1008-fillet-tray-floor-and-three-of-four-corners | tangency-labs/solidcraft#1008 | an R10 round on the four inside floor edges and three of the four inside vertical corners of an open tray, so one corner keeps a sharp vertical edge where two floor rounds meet (rebuilt from the report's edge picks: the original design is not in the report) | analytic | pass | pass |
| fillets/1080-chamfer-beside-openings-fits | tangency-labs/solidcraft#1080 tangency-labs/solidcraft#1124 | a 4 mm chamfer on the top front edge of a cube with three square openings stays clear of the openings (they start 5 mm in) | analytic | pass | pass |
| fillets/1080-chamfer-runs-into-openings-refused | tangency-labs/solidcraft#1080 tangency-labs/solidcraft#1124 | a 9 mm chamfer on the top front edge of a cube with square openings 5 mm in must be refused: it would cut through the rims of the openings | invariants | pass | pass |
| fillets/1191-fillet-both-rims-of-a-tube-top | tangency-labs/solidcraft#1191 | an R2 round on the outer and inner rim circles of a tube's top face (the report's ten picks on a ring-shaped top: the round failed after 0.10.1; rebuilt as a plain tube since the design is not in the report) | analytic | pass | pass |
| fillets/1207-fillet-concave-arc-at-boss | tangency-labs/solidcraft#1207 | an R2 round on the concave arc where a bar top meets a boss that only partly sits on it | analytic | not supported yet: step 3 (solid.fillet): not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be | pass |
| fillets/1207-fillet-straight-edge-ending-on-boss | tangency-labs/solidcraft#1207 | an R2 round along the straight top edge of a bar that runs out against a cylindrical boss | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 3 (Some([15.19868415359896, 12.999999999966905, 10.0]) to (want ok); smlib_check the operation failed: pcurve of loop 0 use 3 (Some([15.19868415359896, 12.999999999966905, 10.0]) to (want ok) | pass |
| fillets/1213-round-end-circle-of-bent-tube | tangency-labs/solidcraft#1213 tangency-labs/solidcraft#1291 | an R3 round on the end circle of a lofted tube whose axis bends (a 60 degree torus section) | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([2.999961609466277, 0.03799226106586362, 20.00000 (want ok) | pass |
| fillets/1262-fillet-boss-bottom-arc | tangency-labs/solidcraft#1262 | a 0.8 mm round on the exposed half circle at the bottom of a cylindrical boss joined to a box side | analytic | pass | pass |
| fillets/1390-chamfer-hole-rim-touching-bottom | tangency-labs/solidcraft#1390 tangency-labs/solidcraft#1574 tangency-labs/solidcraft#1428 | a 3 mm chamfer on the rim of a hole that is tangent to the bottom face runs off that face and must not add material below the part | invariants | pass | pass |
| fillets/1488-fillet-slab-end-after-nudged-loft-join | tangency-labs/solidcraft#1488 tangency-labs/solidcraft#1517 | an R1 fillet on the end edge of a 3.5 mm slab after a pleated loft was joined flush with its inner face (the join needs a tool retry; later fillets must still work) | invariants | pass | pass |
| fillets/1557-fillet-vertical-corners-after-bottom-rounds | tangency-labs/solidcraft#1557 tangency-labs/solidcraft#1581 | vertical corner fillets R2 on a 25x25x10 box whose four bottom edges are already rounded R2 (the round meets the earlier mitre) | analytic | pass | FAIL: step 6 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) |
| fillets/1667-fillet-rim-line-beside-quarter-turns | tangency-labs/solidcraft#1667 tangency-labs/solidcraft#1702 | an R5 round of the top rim of a 297 mm long box whose corners are R5 (a 287 mm line beside 7.85 mm quarter turns) | analytic | pass | FAIL: step 3 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) |
| fillets/1668-fillet-both-sides-of-thin-wall | tangency-labs/solidcraft#1668 tangency-labs/solidcraft#1720 | an R5 round on an outer top edge and the matching inner (concave) edge of a 2 mm wall in one feature fits, as it does one after the other | analytic | pass | pass |
| fillets/190-fillet-rim-as-tall-as-wall | tangency-labs/solidcraft#190 tangency-labs/solidcraft#318 | an R2 round of the top edge of a disc 2 mm high (the round is as tall as the wall, so it meets the bottom face) | analytic | pass | pass |
| fillets/193-paste-copies-the-fillets | tangency-labs/solidcraft#193 tangency-labs/solidcraft#214 tangency-labs/solidcraft#363 tangency-labs/solidcraft#613 | a block with two R2 top edges rounded, copied and pasted 40 mm over: the copy must carry its own fillets | analytic | pass | pass |
| fillets/1986-chamfer-arc-edge-of-joined-sectors | tangency-labs/solidcraft#1986 | a 3 mm chamfer on the outer top arc of a 120 degree annular sector joined to a lower inner sector (the joined outer wall must not limit the chamfer) | analytic | not supported yet: step 15 (solid.chamfer): not supported yet: the blend is larger than the neighbouring faces (site 1853) (the operation failed: not supported yet: only straight | pass |
| fillets/199-fillet-uses-up-end-face | tangency-labs/solidcraft#199 tangency-labs/solidcraft#317 | an R3 round on the four vertical edges of a 14x6x10 box: the two rounds on each 6 mm end face meet exactly (the face is used up) | analytic | pass | pass |
| fillets/219-pattern-of-filleted-pockets | tangency-labs/solidcraft#219 | a plate with 6 pockets made by patterning one pocket and the R3.2 round of its four corner edges, the pocket height set by a parameter | analytic | pass | pass |
| fillets/2341-pattern-of-chamfered-bosses | tangency-labs/solidcraft#2341 tangency-labs/solidcraft#2774 tangency-labs/solidcraft#2775 tangency-labs/solidcraft#2342 | a 2 x 2 grid made by a feature pattern of a boss and its two chamfers (a concave root chamfer and a convex tip chamfer) | analytic | pass | pass |
| fillets/237-fillet-concave-edge-between-two-cylinders | tangency-labs/solidcraft#237 tangency-labs/solidcraft#238 | an R6 round on the vertical edge where two cylinder walls meet (the concave corner of two merged discs), the two walls meeting at an angle | analytic | pass | pass |
| fillets/2498-fillet-tiny-end-edges-rounded-rectangle | tangency-labs/solidcraft#2498 tangency-labs/solidcraft#2506 | an R2 round of the top loop of a 26.4x8.6x8.4 rounded rectangle whose end edges are only 0.02 mm long (corner radius 4.29) | analytic | pass | pass |
| fillets/2672-chamfer-one-pick-large-plate | tangency-labs/solidcraft#2672 tangency-labs/solidcraft#3295 | one pick on a stadium boss top rim chamfers the whole tangent loop, also when the part is more than 200 mm across | analytic | pass | pass |
| fillets/2708-fillet-curvature-continuous-angled-ends | tangency-labs/solidcraft#2708 tangency-labs/solidcraft#2739 | a curvature-continuous (G2) fillet of size 5 on a straight edge that ends on two slanted planar faces | analytic | pass | FAIL: volume_mm3 11867.72421 (want 11854.052069) |
| fillets/2719-chamfer-as-wide-as-corner-round | tangency-labs/solidcraft#2719 | a 1 mm chamfer round a bottom loop whose corners are R1 rounds: each corner cone closes to a point on the bottom face | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([-18.99999999999999, -19.0, 0.0]) to Some([-19.0, (want ok); smlib_check the operation failed: pcurve of loop 0 use 0 (Some([-18.99999999999999, -19.0, 0.0]) to Some([-19.0, (want ok) | FAIL: step 3 (solid.chamfer): SMLib chamfer: operation: SMLib failed (status 1001) |
| fillets/2752-fillet-rim-of-flat-cut-on-sphere | tangency-labs/solidcraft#2752 tangency-labs/solidcraft#2787 | an R1 round round the rim of a radius-2 sphere cut flat at z=1 | analytic | not supported yet: step 3 (solid.fillet): not supported yet: the ball doesn't fit along the resampled spine (the operation failed: not supported yet: only straight edges can be bl | pass |
| fillets/2797-chamfer-two-distances-circular-rim | tangency-labs/solidcraft#2797 tangency-labs/solidcraft#3300 tangency-labs/solidcraft#2893 | a Two Distances chamfer (1 mm on the top face, 0.5 mm down the wall) on the circular rim between a plane and a cylinder | analytic | pass | not supported yet: step 2 (solid.chamfer): invalid input: not supported yet: a chamfer with two different setbacks (two distances, or a distance and an angle) with the SMLib kerne |
| fillets/2811-fillet-rib-roots | tangency-labs/solidcraft#2811 | an R1.5 fillet of the 32 vertical root edges of 8 ribs between two walls of a grille tray (a performance case: the time must not blow up) | analytic | pass | pass |
| fillets/2852-fillet-outer-round-concentric-with-inner | tangency-labs/solidcraft#2852 | an R18 round on the outside top edges of a 3 mm thick upside-down U, concentric with the R15 round of its inside edges | analytic | pass | pass |
| fillets/2907-chamfer-two-end-outlines-rounded-top | tangency-labs/solidcraft#2907 tangency-labs/solidcraft#3861 | a 1.5 mm chamfer of both end outlines (sides, top and the two top arcs) of a prism with rounded top corners, bottom edges left alone | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 1 (Some([0.0, 26.0, 18.5]) to Some([0.6931089443069371, 2 (want ok) | pass |
| fillets/324-fillet-over-hole-overlap | tangency-labs/solidcraft#324 tangency-labs/solidcraft#1885 | a 4 mm fillet on a top edge whose round overlaps the rim of a through hole (the hole breaks into the round) | analytic | FAIL: step 6 (solid.fillet): fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius th | FAIL: step 6 (solid.fillet): SMLib fillet: operation: SMLib's result is not a closed solid |
| fillets/3276-chamfer-edge-of-1mm-protrusion-on-joined-l | tangency-labs/solidcraft#3276 | three extrudes joined into an L-shaped body with a 1 mm protrusion, then a chamfer on the protrusion's outer edge (the report: the corners are no longer 90 degrees and the chamfer fails) | analytic | pass | pass |
| fillets/334-fillet-top-outline-after-concave-rounds | tangency-labs/solidcraft#334 tangency-labs/solidcraft#335 | an R2 round on the whole top outline of two merged cylinders after their two concave vertical edges were rounded R5 | analytic | pass | pass |
| fillets/3369-fillet-edge-ends-on-tangent-seam | tangency-labs/solidcraft#3369 tangency-labs/solidcraft#3922 | an R2 round on a straight edge whose ends sit on the tangent seam between a flat top and a rounded end | analytic | not supported yet: step 9 (solid.fillet): not supported yet: the faces at the edge ends must be planar | FAIL: step 9 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) |
| fillets/3435-fillet-larger-than-top-ring | tangency-labs/solidcraft#3435 tangency-labs/solidcraft#3441 | a fillet of radius 6.9 on a cylinder rim whose flat top ring (round the joined boss) is only 4.3 mm wide must be refused, not grow the part | invariants | FAIL: succeeded where the case expects a refusal | pass |
| fillets/3655-chamfer-edge-order-box | tangency-labs/solidcraft#3655 tangency-labs/solidcraft#3660 | a plain box with all 12 edges chamfered, the edges listed in an order that was refused | analytic | not supported yet: step 5 (solid.chamfer): not supported yet: the blend is larger than the neighbouring faces | pass |
| fillets/3753-circular-pattern-of-hole-and-its-rim-chamfer | tangency-labs/solidcraft#3753 | a circular pattern (6 copies about Y) of a through hole and the 1 mm chamfer on its rim (the report: the pattern is refused because the copied chamfer 'would grow the part'); rebuilt as a hole in a disc, the original design is not in the report | analytic | pass | pass |
| fillets/3779-chamfer-all-spline-spans | tangency-labs/solidcraft#3779 tangency-labs/solidcraft#3804 | a 0.1 mm chamfer on all eight top-rim spans of a 20 x 20 pillow whose four sides are fit splines (two cubic spans each) | invariants | not supported yet: step 8 (solid.chamfer): not supported yet: the blend is larger than the neighbouring faces (site 1853) (the operation failed: not supported yet: only straight e | pass |
| fillets/3779-fillet-all-spline-spans | tangency-labs/solidcraft#3779 tangency-labs/solidcraft#3804 | a 0.1 mm fillet on all eight top-rim spans of a 20 x 20 pillow whose four sides are fit splines (two cubic spans each) | invariants | not supported yet: step 8 (solid.fillet): not supported yet: the blend is larger than the neighbouring faces | pass |
| fillets/3868-chamfer-concave-edge-adds-material | tangency-labs/solidcraft#3868 | a chamfer of an inside (concave) edge fills the corner and adds material, one on the outside edge removes it | analytic | pass | pass |
| fillets/4055-chamfer-bar-edge-over-joined-pin | tangency-labs/solidcraft#4055 | a 3 mm chamfer on the bottom long edge of a bar joined on top of a pin, where the chamfer is wider than the 2 mm gap between that edge and the pin | analytic | FAIL: smlib_check SMLib check: 1 failed tests: SmFace::Test #38 Intersecting Face Loops: Face Loops must be disjoint i (want ok); volume_mm3 35528.57632 (want 35581.857895) | pass |
| fillets/4101-chamfer-tapered-plug-corners | tangency-labs/solidcraft#4101 | the four edges of a block end face chamfered where the block sides are 1 degree off square: exact volume of the plane-clipped prism (the corner edges of about 0.0001 mm are real geometry) | analytic | pass | pass |
| fillets/4141-fillet-corner-after-wedge-cut-beside-bspline | tangency-labs/solidcraft#4141 | an R5 round on the corner edge left by a wedge cut through a body vertex next to a B-spline face | invariants | not supported yet: step 11 (solid.fillet): not supported yet: the blend is larger than the neighbouring faces | pass |
| fillets/4143-fillet-notch-rim-on-bspline-ramp | tangency-labs/solidcraft#4143 | an R4 round on the rim of an R5 notch where its cylinder meets an extruded B-spline ramp, both ends running into a square wall | invariants | not supported yet: step 13 (solid.fillet): not supported yet: the blend is larger than the neighbouring faces | FAIL: step 13 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) |
| fillets/485-fillet-d-prism-top-outline-arc-and-flat | tangency-labs/solidcraft#485 tangency-labs/solidcraft#604 | an R0.5 round on both top perimeter edges (the arc and the flat) of a D-shaped prism, the two edges meeting at sharp 90 degree corners | analytic | pass | pass |
| fillets/556-fillet-edge-ending-on-curved-boss | tangency-labs/solidcraft#556 tangency-labs/solidcraft#646 | an R0.5 round on a single straight bottom edge of a box whose end runs out against a cylindrical boss wall | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([39.5, 8.010421183869017, 0.0]) to Some([49.81441 (want ok); smlib_check the operation failed: pcurve of loop 0 use 0 (Some([39.5, 8.010421183869017, 0.0]) to Some([49.81441 (want ok) | pass |
| fillets/783-fillet-pick-far-from-any-edge-refused | tangency-labs/solidcraft#783 tangency-labs/solidcraft#820 | a fillet whose edge pick is 15 mm from the nearest edge must be refused, not applied to some other edge | invariants | pass | pass |
| fillets/814-chamfer-hex-hole-corners | tangency-labs/solidcraft#814 tangency-labs/solidcraft#1067 | a 2 mm chamfer on the six vertical corners of a hexagonal hole: one bevel each, not a notch | analytic | pass | pass |
| fillets/851-fillet-three-edges-at-knife-edge-arc-corner | tangency-labs/solidcraft#851 tangency-labs/solidcraft#854 tangency-labs/solidcraft#926 tangency-labs/solidcraft#935 tangency-labs/solidcraft#1294 | three edges meeting at the front corner of a plate with a concave arc wall that runs out in a knife-edge tip: top front edge, arc top edge and front upright, R2 together | invariants | FAIL: record_valid the operation failed: pcurve of loop 0 use 1 (Some([62.16666666666963, -5.480541191988027e-7, 7.9999 (want ok) | pass |
| fillets/862-fillet-curvature-continuous-box-edge | tangency-labs/solidcraft#862 | a curvature-continuous (G2) fillet of size 6 on one edge of a 20 mm cube | analytic | pass | FAIL: volume_mm3 7902.559861 (want 7892.380952) |
| fillets/896-fillet-smooth-seam-refused | tangency-labs/solidcraft#896 tangency-labs/solidcraft#936 | a fillet picked on the seam where a rounded edge runs tangent into the flat top has no corner to round and is refused as an invalid pick | invariants | pass | pass |
| import/1721-closed-bspline-tube-face | tangency-labs/solidcraft#1721 tangency-labs/solidcraft#3880 | a cylinder r=10 h=30 whose side is a closed (rational B-spline) tube face wrapping all the way round a closed non-periodic surface: it must mesh and measure as the full tube | analytic | FAIL: record_valid geometry: portable B-rep: face 1 loop 0 use 0: pcurve starts 1 from the end of the use before it, on (want ok); smlib_check SMLib check: 8 failed tests: SmFace::Test #37 Bad Loop Nesting: Face InnerLoop must lie inside the F (want ok) | not supported yet: step 1 (file.insert_step): tests/kernel-cases/import/1721-closed-bspline-tube-face/input.step: the operation failed: STEP import: no bodies (solid #89: not impo |
| import/2043-outer-bound-opposing-surface-sense | tangency-labs/solidcraft#1974 tangency-labs/solidcraft#2043 | a block whose every plane's axis points into the part and whose faces say same_sense .F. while their FACE_OUTER_BOUND loops run counter-clockwise about the outward normal: the loops are outer bounds, not holes | analytic | pass | pass |
| import/258-cone-point-vertex | tangency-labs/solidcraft#258 | the same STEP cone with a VERTEX_LOOP at the apex: the mesh stopped 30 mm short of the apex | analytic | pass | pass |
| import/258-cone-to-point | tangency-labs/solidcraft#258 | a STEP cone 20 mm across coming to a point 30 mm up (no vertex at the apex): the cone face was meshed flat at its base, so the measured shape was far off | analytic | pass | pass |
| import/258-tiny-pin | tangency-labs/solidcraft#258 | a STEP pin 0.5 mm across, 2 mm long: meshed 1.16 mm off at a 0.5 mm tolerance | analytic | FAIL: record_valid geometry: portable B-rep: face 1 loop 0 use 0: pcurve starts 6.283185307179586 from the end of the u (want ok); smlib_check SMLib check: 8 failed tests: SmFace::Test #37 Bad Loop Nesting: Face InnerLoop must lie inside the F (want ok) | pass |
| import/3098-bspline-edges-over-tiny-knot-span | tangency-labs/solidcraft#3098 | a block whose 12 straight edges are degree-1 B-spline curves over a knot span of 1e-7 (as NX writes short edges); the faces must be kept | analytic | FAIL: step 1 (file.insert_step): tests/kernel-cases/import/3098-bspline-edges-over-tiny-knot-span/input.step: the operation failed: STEP import: no bodies (solid 'blo | pass |
| import/3208-extruded-ellipse-face-over-parameter-seam | tangency-labs/solidcraft#3120 tangency-labs/solidcraft#3208 | a prism over a circular segment whose curved side lies on a SURFACE_OF_LINEAR_EXTRUSION of an ELLIPSE (a = b = 10) and spans the ellipse's parameter origin (-60 to +60 degrees): the face must cover only the narrow segment side, not wrap the ellipse | analytic | pass | pass |
| import/3352-vertex-off-its-edge-curve | tangency-labs/solidcraft#3351 tangency-labs/solidcraft#3352 | a 300 mm square surface whose corner vertex sits 0.19 mm off the end of its edge's curve (the file declares 0.01 mm accuracy): the face must be kept, the vertex snapped onto the curve | analytic | pass | pass |
| import/3359-iges-trim-pieces-written-end-to-start | tangency-labs/solidcraft#3358 tangency-labs/solidcraft#3359 | a box of six trimmed planes whose composite trim curves have their 2nd and 4th pieces written end to start: every loop must still close | analytic | pass | pass |
| import/3730-void-oriented-shell-false | tangency-labs/solidcraft#3730 tangency-labs/solidcraft#3872 | a block with a closed cavity written as BREP_WITH_VOIDS whose void shell (outward-facing faces) is turned by ORIENTED_CLOSED_SHELL .F.; the cavity must be taken out, not added | analytic | pass | pass |
| import/3806-iges-revolved-arc-spherical-cap-dome | tangency-labs/solidcraft#3806 tangency-labs/solidcraft#3813 | a dome: an IGES surface of revolution (120) of a 60-to-90 degree circular arc (100) of radius 50 centred on the axis, trimmed by a circle at the rim, over a flat base disc; the cap must be 50 mm across and 6.7 mm tall, not a whole sphere | analytic | pass | pass |
| import/3845-iges-trim-pieces-miss-by-a-gap | tangency-labs/solidcraft#3845 tangency-labs/solidcraft#3846 | a box of six trimmed planes where the edge (0,0,0)-(0,20,0) stops 0.01 mm short of its end corner in both faces that use it: the small gap must be closed, giving a closed box instead of two dropped faces | analytic | FAIL: faces 4 (want 6); area_mm2 1400 (want 2200) | FAIL: step 1 (file.insert_step): tests/kernel-cases/import/3845-iges-trim-pieces-miss-by-a-gap/input.igs: the operation failed: STEP import: no bodies (solid 'Body1': |
| import/3871-cone-base-circle-with-vertex-loop | tangency-labs/solidcraft#3871 tangency-labs/solidcraft#3901 | the same cone with a VERTEX_LOOP at its point on the cone face: the point must still be reached, not read as a flat disc | analytic | pass | pass |
| import/3871-cone-bounded-only-by-its-base-circle | tangency-labs/solidcraft#3871 tangency-labs/solidcraft#3901 tangency-labs/solidcraft#3880 | a cone whose face is bounded only by its base circle (no vertex at the point) must reach its point, not come in as a flat disc | analytic | pass | pass |
| import/3880-cylinder-seam-edge | tangency-labs/solidcraft#3880 | a cylinder r=10 h=30 whose side face is written with a seam edge: one closed solid with 3 faces | analytic | pass | pass |
| import/3880-nurbs-hemisphere-dome | tangency-labs/solidcraft#3880 | a hemisphere r=20 whose curved face is a rational B-spline surface, flat disc below | analytic | FAIL: record_valid geometry: portable B-rep: face 1 loop 0 use 0: pcurve starts 1 from the end of the use before it, on (want ok); smlib_check SMLib check: 1 failed tests: SmTrimmingTools::Test #1 UVEdge/UVEdge Gap: too large U Dir gap between (want ok) | not supported yet: step 1 (file.insert_step): tests/kernel-cases/import/3880-nurbs-hemisphere-dome/input.step: the operation failed: STEP import: no bodies (solid #73: not importe |
| import/3886-iges-bspline-curve-over-tiny-knot-span | tangency-labs/solidcraft#3885 tangency-labs/solidcraft#3886 | a box of six trimmed planes with one edge written as a B-spline curve (126) over a knot span of 1e-7: both faces it bounds must be kept | analytic | pass | pass |
| import/3912-iges-hole-trim-first-piece-reversed | tangency-labs/solidcraft#3912 | a 10 x 10 trimmed patch with a 4 x 4 square hole whose composite trim curve starts with a reversed piece: the hole stays a hole | analytic | pass | pass |
| import/3913-iges-trim-curve-first-piece-reversed | tangency-labs/solidcraft#3912 tangency-labs/solidcraft#3913 | a box of six trimmed planes whose composite trim curves start with a piece written end to start (1st and 3rd pieces reversed): every loop must still close | analytic | FAIL: step 1 (file.insert_step): tests/kernel-cases/import/3913-iges-trim-curve-first-piece-reversed/input.igs: the operation failed: STEP import: no bodies (solid 'B | FAIL: step 1 (file.insert_step): tests/kernel-cases/import/3913-iges-trim-curve-first-piece-reversed/input.igs: the operation failed: STEP import: no bodies (solid 'B |
| import/3963-closed-spline-edge-vertex-past-start | tangency-labs/solidcraft#3963 | a 20 mm square face bounded by one closed degree-1 B-spline edge whose only vertex sits at parameter 2e-7, just past the curve's start: the face must be kept, not dropped or crashed on | analytic | CRASH: step 1 (file.insert_step): tests/kernel-cases/import/3963-closed-spline-edge-vertex-past-start/input.step: the operation failed: STEP import: no bodies (solid ' | pass |
| import/3972-iges-two-separate-closed-boxes | tangency-labs/solidcraft#3928 tangency-labs/solidcraft#3972 | an IGES file of twelve trimmed planes forming two separate closed boxes (10x20x30, one 100 mm along x): they must come in as two solids, not one open body | analytic | FAIL: smlib_check SMLib check: 4 failed tests: SmShell::Test #22 SmFaceuse_TYPE: sShellFaceuses and sFaceuses2 are equ (want ok); body_count 1 (want 2) | FAIL: smlib_check SMLib check: 4 failed tests: SmShell::Test #22 SmFaceuse_TYPE: sShellFaceuses and sFaceuses2 are equ (want ok); body_count 1 (want 2) |
| import/4005-cylinder-written-as-near-zero-cone | tangency-labs/solidcraft#4005 | a cylinder r=5 h=10 whose side is a CONICAL_SURFACE with a semi-angle of 8e-12 rad (a cylinder to within rounding, as the exporter wrote it): the face must be read, not refused as a 'bad cone' | analytic | FAIL: smlib_check SMLib check: 2 failed tests: SmShell::Test #22 SmFaceuse_TYPE: sShellFaceuses and sFaceuses2 are equ (want ok); faces 2 (want 3); edges 2 (want 3); volume_mm3 261.772931 (want 785.3982); area_mm2 157.063759 (want 471.2389) | pass |
| import/4006-plane-written-as-cone-of-nearly-right-angle | tangency-labs/solidcraft#4006 | an annular plate r 4..10, 3 thick, whose top face is a CONICAL_SURFACE of semi-angle pi/2 - 7e-12 (a plane to within rounding, as the exporter wrote it): the face must be read, not refused as a 'bad cone', and the body stays closed | analytic | FAIL: faces 3 (want 4); volume_mm3 527.743525 (want 791.6813); area_mm2 527.754304 (want 791.6813) | FAIL: step 1 (file.insert_step): tests/kernel-cases/import/4006-plane-written-as-cone-of-nearly-right-angle/input.step: the operation failed: STEP import: no bodies ( |
| sheet-metal/1040-convert-a-1200-mm-strip-1-mm-thick | tangency-labs/solidcraft#1040 | a 1200 x 100 x 1 strip (diagonal over 1000 times its thickness) converted to sheet metal: refused with no outline on that face | analytic | pass | pass |
| sheet-metal/1040-convert-a-990-mm-strip-keeps-its-1-mm-hole | tangency-labs/solidcraft#1040 | a 990 x 100 x 1 strip with holes of 10, 4, 2 and 1 mm: the 1 mm hole fell out of the outline when the mesh sagged by almost the thickness | analytic | pass | FAIL: step 6 (sheet.convert): no outline on that face |
| sheet-metal/1092-convert-a-channel-with-its-bends-modelled | tangency-labs/solidcraft#1092 tangency-labs/solidcraft#1314 | a U channel modelled with its bend radii (R2 inside, R4 outside), a 6 mm hole in one wall and a label engraved 0.2 deep in its web, converted at the bends' outer arcs | analytic | pass | pass |
| sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius | tangency-labs/solidcraft#1092 tangency-labs/solidcraft#1314 | an L section modelled with a bend of R2 inside and R4 outside, converted at that bend under a rule of R3: the bend becomes one bend of the rule's radius at the legs' virtual sharp | analytic | pass | pass |
| sheet-metal/1092-convert-an-engraved-plate | tangency-labs/solidcraft#1092 tangency-labs/solidcraft#1314 | a 60 x 40 x 1 plate with a 20 x 10 x 0.1 engraving in its top face converted to sheet metal (refused as not a plate of even thickness; the engraving becomes a pocket of the sheet) | analytic | pass | pass |
| sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend | tangency-labs/solidcraft#1095 | a flange unfolded, a triangular cut-out with a corner on the sheet's own edge at the middle of the bend zone, refolded: sew failed (this wire is not simple) | analytic | FAIL: smlib_check SMLib check: 4 failed tests: SmFace::Test #32 Face has Coincident Vertices: Face has Coincient Verti (want ok) | FAIL: step 11 (solid.extrude): SMLib export: the mapped B-rep does not validate: portable B-rep: a closed shell bounds two regions and encloses one |
| sheet-metal/1280-hole-square-to-a-45-degree-flange | tangency-labs/solidcraft#1280 | a 5 mm hole drilled square to the face of a 45 degree flange: the drill cap's certificate refused it by 1e-11 mm | analytic | pass | pass |
| sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge | tangency-labs/solidcraft#1285 tangency-labs/solidcraft#1340 | an 80 x 50 x 2 plate with a 40 wide, 30 high wall on part of its front edge, converted at the wall's outside bend edge: refused because the bend's setback used up an edge of a face | analytic | pass | pass |
| sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece | tangency-labs/solidcraft#1295 tangency-labs/solidcraft#1338 | a 100 x 60 sheet with a 45 degree 40 mm flange and a slot cut across the flange just past its bend: the rest of the flange keeps no material joining it to the base | analytic | pass | pass |
| sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees | tangency-labs/solidcraft#1311 | a 100 x 60 plate turned 62 degrees about the origin with a 90 degree inside flange on one edge: the trimmed corner falls on the sew grid and the flange failed to close | analytic | pass | pass |
| sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief | tangency-labs/solidcraft#1232 tangency-labs/solidcraft#1481 | a 120 x 90 base with two edge flange features (bottom and left edges with a round relief, top and right edges with a square one) over a rule whose relief is a notch, unfolded | analytic | pass | pass |
| sheet-metal/1797-tray-with-torn-corners-at-72-degrees-folded | tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799 | a tray whose flanges lean at 72 degrees with the tear corner relief: the torn ends are helices over slanted bends | invariants | pass | pass |
| sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet | tangency-labs/solidcraft#1979 tangency-labs/solidcraft#1980 | on a folded sheet a rectangular cut-out and then twenty 4 mm holes in one sketch: a cut after a cut was dropped without a word, and many holes ran out of budget | analytic | pass | pass |
| sheet-metal/262-fold-a-tab-just-inside-its-root | tangency-labs/solidcraft#262 tangency-labs/solidcraft#277 | a 20 x 20 tab folded 90 degrees on a line 1 mm inside its root, where the bend zone stays clear of the blank's outline | analytic | pass | pass |
| sheet-metal/262-fold-at-a-tab-root-refused | tangency-labs/solidcraft#262 tangency-labs/solidcraft#277 | a fold exactly at a tab's root, where the bend zone (+-BA/2) would reach the blank's outline beside the tab, needs a bend relief | invariants | pass | pass |
| sheet-metal/264-fold-one-of-two-collinear-tabs | tangency-labs/solidcraft#264 tangency-labs/solidcraft#279 | a 100 x 40 blank with two 15 x 7 tabs on one line, one tab folded 90 degrees on a line that the other tab also lies on | analytic | pass | pass |
| sheet-metal/264-one-fold-across-two-collinear-tabs | tangency-labs/solidcraft#264 | one fold line spanning both of two collinear tabs folds both | analytic | pass | pass |
| sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges | tangency-labs/solidcraft#296 tangency-labs/solidcraft#355 | an 80 x 40 base with a 30 mm flange on the y = 0 edge and a 15 mm flange on the x = 80 edge, and a round hole through the base beside them: sew failed with a non-manifold edge contact | invariants | pass | pass |
| sheet-metal/3078-flange-on-the-side-edge-of-a-flange | tangency-labs/solidcraft#3078 tangency-labs/solidcraft#3274 | an edge flange on the side edge of an existing wall, meeting a flange on the base across the existing bend with a round corner relief (not supported yet: a flange on the side of another flange) | invariants | pass | pass |
| sheet-metal/3234-edge-flange-on-the-bend-line-refused | tangency-labs/solidcraft#3234 tangency-labs/solidcraft#3273 | a second edge flange picked on the bend line of an existing flange made a doubled flange with a gap and two shells in one body | invariants | pass | pass |
| sheet-metal/3316-convert-a-plate-keeps-its-place | tangency-labs/solidcraft#3316 | a 100 x 60 x 2 plate converted from its top face moved down by one thickness (z -2..0 instead of 0..2) | analytic | pass | pass |
| sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet | tangency-labs/solidcraft#3324 tangency-labs/solidcraft#3325 tangency-labs/solidcraft#3418 | a fillet on a sheet metal corner changes the body but not its sheet model, so the flat pattern would be a sharp rectangle: it must refuse | invariants | pass | pass |
| sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern | tangency-labs/solidcraft#3353 tangency-labs/solidcraft#3354 | a sheet metal body mirrored into a new body must still be sheet metal (flat pattern, bend table): it was a plain solid | analytic | FAIL: step 13 (sheet.flat_pattern): invalid parameters for sheet.flat_pattern: Body1 (2) is not a sheet metal body |
FAIL: step 13 (sheet.flat_pattern): invalid parameters for sheet.flat_pattern: Body1 (2) is not a sheet metal body |
| sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs | tangency-labs/solidcraft#3417 tangency-labs/solidcraft#3421 tangency-labs/solidcraft#3280 | a 60 mm rhombus (120 and 60 degree corners) with a 90 degree flange on each of its four edges and a square corner relief 8 mm across: the reliefs at the two 120 degree corners would overlap | invariants | pass | pass |
| sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-72-degrees | tangency-labs/solidcraft#349 | a 2000 x 2500 tray with four 38.6 mm flanges at 72 degrees whose sketch is driven by parameters W and H, shrunk to 400 x 300 and unfolded (the solver leaves 1e-13 mm residuals: the planar region arrangement failed) | analytic | pass | pass |
| sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees | tangency-labs/solidcraft#349 | a 2000 x 2500 tray with four 38.6 mm flanges at 90 degrees whose sketch is driven by parameters W and H, shrunk to 400 x 300 and unfolded (the solver leaves 1e-13 mm residuals: the planar region arrangement failed) | analytic | pass | pass |
| sheet-metal/405-tray-with-72-degree-flanges-folded | tangency-labs/solidcraft#405 tangency-labs/solidcraft#406 | a 120 x 90 tray with four 38.6 mm flanges at 72 degrees closed with the rule's gap: the corners used to stay open as a V | invariants | pass | pass |
| sheet-metal/405-unfold-a-tray-with-72-degree-flanges | tangency-labs/solidcraft#405 tangency-labs/solidcraft#406 | a 120 x 90 tray with four 38.6 mm flanges at 72 degrees, closed at the corners with the rule's gap, unfolded | analytic | pass | pass |
| sheet-metal/416-round-hole-and-slanted-slot-across-a-bend | tangency-labs/solidcraft#416 tangency-labs/solidcraft#425 tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799 | a 160 x 100 plate with a 90 degree flange, unfolded, a 20 mm round hole and a 10 x 24 slot turned 30 degrees cut across the bend zone, refolded: the cut-out walls fold to curves on the bend's cylinder | analytic | pass | pass |
| sheet-metal/436-edge-flanges-at-105-and-120-degrees-on-opposite-edges | tangency-labs/solidcraft#436 tangency-labs/solidcraft#447 | one edge flange feature with its own angle and height on each of two opposite edges: 105 degrees and 30 mm, 120 degrees and 25 mm | analytic | pass | pass |
| sheet-metal/436-edge-flanges-with-their-own-height-on-opposite-edges | tangency-labs/solidcraft#436 tangency-labs/solidcraft#447 | one edge flange feature whose two edges carry their own heights (30 and 25 mm) over the feature's 20 mm default | analytic | pass | pass |
| sheet-metal/436-unfold-a-tray-with-four-angles-and-heights | tangency-labs/solidcraft#436 tangency-labs/solidcraft#447 tangency-labs/solidcraft#501 | one edge flange feature whose four edges carry 75, 90, 105 and 120 degrees and heights 38.6, 38.6, 30 and 25, with corners between unequal angles closed, unfolded | analytic | pass | pass |
| sheet-metal/479-unfold-a-tray-with-round-relieved-corners | tangency-labs/solidcraft#479 | a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape round, unfolded | analytic | pass | pass |
| sheet-metal/488-unfold-a-tray-with-square-relieved-corners | tangency-labs/solidcraft#488 | a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape rectangular, unfolded | analytic | pass | pass |
| sheet-metal/514-refold-an-L-bracket-after-unfolding-it | tangency-labs/solidcraft#514 | an L bracket unfolded and refolded: the refold must give the folded part back | analytic | pass | pass |
| sheet-metal/514-unfold-an-L-bracket | tangency-labs/solidcraft#514 | a 60 x 40 base with a 20 mm 90 degree flange on one edge, unfolded: the flat plate is the base, the bend allowance and the flange's straight | analytic | pass | pass |
| sheet-metal/529-a-hundred-slots-and-four-folds | tangency-labs/solidcraft#529 tangency-labs/solidcraft#430 tangency-labs/solidcraft#964 | a 200 x 300 panel with a hundred 4.4 x 20 slots and four 90 degree folds (one per side tab): the flat geometry ran out of its processing budget above 77 slots | analytic | pass | pass |
| sheet-metal/541-box-cut-straight-through-a-flat-sheet | tangency-labs/solidcraft#541 | a solid.box cut straight through a 100 x 60 x 2.5 sheet was refused, though the same rectangle as an extrude cut works | analytic | pass | pass |
| sheet-metal/542-round-hole-in-a-flat-sheet-and-its-flat-pattern | tangency-labs/solidcraft#542 tangency-labs/solidcraft#552 | a 3.2 mm round hole cut through a 100 x 60 x 2.5 sheet, which the flat pattern must report as a circle | analytic | pass | pass |
| sheet-metal/560-hole-through-a-sheet-metal-base | tangency-labs/solidcraft#560 tangency-labs/solidcraft#656 | solid.hole square to a flat sheet metal panel was refused as sheet machining that cannot be preserved | analytic | pass | pass |
| sheet-metal/570-flange-refuses-thickness-it-would-ignore | tangency-labs/solidcraft#570 tangency-labs/solidcraft#594 tangency-labs/solidcraft#572 | sheet.flange given thickness, k_factor and bend_radius, which the rule alone defines, used to ignore them silently and build the 2.5 mm default | invariants | pass | pass |
| sheet-metal/601-return-lip-on-a-flanges-far-edge | tangency-labs/solidcraft#593 tangency-labs/solidcraft#601 | an edge flange stands on the far edge of another edge flange (a lip turned in over the base), both 90 degrees | analytic | pass | pass |
| sheet-metal/634-flange-beside-the-leg-of-an-L-folded | tangency-labs/solidcraft#634 | the same bar with its leg and a 15 mm inside flange on the bar's top edge, folded | analytic | pass | pass |
| sheet-metal/634-unfold-a-flange-beside-the-leg-of-an-L | tangency-labs/solidcraft#634 | a 160 x 30 bar with a 20 x 30 leg past its top edge at the left end, and a 90 degree 15 mm inside flange on the bar's top edge (x 20..160), unfolded: the flange's trim cut the leg away | analytic | pass | pass |
| sheet-metal/638-fold-both-collinear-tabs-one-after-the-other | tangency-labs/solidcraft#638 tangency-labs/solidcraft#652 tangency-labs/solidcraft#963 | two collinear tabs folded in two features on the same line; the second fold used to be refused as crossing a slanted edge | analytic | pass | pass |
| sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank | tangency-labs/solidcraft#639 tangency-labs/solidcraft#653 tangency-labs/solidcraft#963 | a tab (x 45..60, y 60..90) on an inside edge of an L-shaped blank folded 90 degrees at x = 59 with the fixed point on the other leg; refused as folding tabs that join again | analytic | pass | pass |
| sheet-metal/659-ellipse-cutout-across-a-bend | tangency-labs/solidcraft#659 tangency-labs/solidcraft#692 | a 160 x 100 plate with a 90 degree flange, unfolded, a 24 x 12 ellipse cut across the bend zone and refolded: the cut's wall folds to a curve on the bend's cylinder | analytic | pass | pass |
| sheet-metal/659-ellipse-cutout-in-a-flat-sheet | tangency-labs/solidcraft#659 tangency-labs/solidcraft#692 | a 20 x 12 ellipse cut through a 100 x 60 x 2.5 sheet: it became 0.001 mm chords, one face each | analytic | pass | pass |
| sheet-metal/685-fold-with-the-fixed-point-on-the-top-face | tangency-labs/solidcraft#958 | a large thin blank folded across its whole width with the fixed point exactly on the sheet's top face | analytic | pass | pass |
| sheet-metal/702-flange-along-what-a-cutout-leaves | tangency-labs/solidcraft#702 | a 200 x 100 plate whose bottom-left 100 x 60 is cut away, and a 90 degree 40 mm inside flange picked on what is left of the bottom edge (x 100..200) | analytic | pass | pass |
| sheet-metal/723-tray-with-torn-corners-folded | tangency-labs/solidcraft#723 tangency-labs/solidcraft#809 tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799 | a 120 x 90 tray with four 20 mm 90 degree flanges and the tear corner relief: each torn bend end is a helical cut across the bend | invariants | pass | pass |
| sheet-metal/723-unfold-a-tray-with-torn-corners | tangency-labs/solidcraft#723 tangency-labs/solidcraft#809 tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799 | a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape tear, unfolded | analytic | pass | pass |
| sheet-metal/725-convert-a-shelled-tray-and-unfold-it | tangency-labs/solidcraft#647 tangency-labs/solidcraft#725 tangency-labs/solidcraft#1285 tangency-labs/solidcraft#1340 | a 100 x 60 x 30 box shelled to 2 mm, converted to sheet metal by its four bottom edges and unfolded | analytic | pass | pass |
| sheet-metal/774-convert-a-plate-with-nine-round-holes | tangency-labs/solidcraft#774 tangency-labs/solidcraft#977 | a 30 x 30 x 2 plate with nine 4 mm holes converted to sheet metal (refused as not a plate of even thickness: the holes were read as polygons) | analytic | pass | pass |
| sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded | tangency-labs/solidcraft#839 | a 200 x 100 plate with its corners rounded 8 and one 40 mm inside flange on its bottom edge, unfolded: the trim made the outline's arcs chords | analytic | pass | pass |
| sheet-metal/955-hole-drilled-into-a-sheet-metal-rim | tangency-labs/solidcraft#955 | a 2 mm hole drilled 10 mm deep into the rim of a 4 mm sheet, along the panel; it is a bore the panel keeps | analytic | pass | pass |
| sheet-metal/978-edge-flange-beside-a-ledge-as-tall-as-its-setback | tangency-labs/solidcraft#978 | a 90 degree inside flange of radius 1 on an edge that has a ledge beside it exactly as tall as the flange's setback (3 mm): sew failed with a degenerate edge | invariants | pass | pass |
| shell/12-offset-one-split-face-piece | tangency-labs/solidcraft#12 | Offset Face on one piece of a split face moves only that piece, not the coplanar neighbour | analytic | pass | pass |
| shell/1494-shell-box-with-cylinder-on-edge-line | tangency-labs/solidcraft#1494 | a 47.5x45x30 box with a cylinder r7.5 joined on its side whose axis lies in the plane of the box's front face (y=0), shelled 1 mm open at the bottom | invariants | FAIL: step 3 (solid.shell): offset: a corner whose faces don't meet the same way after the move | FAIL: step 3 (solid.shell): SMLib shell: operation: SMLib failed (status 1001) |
| shell/1525-shell-box-with-rounds-chamfer-and-fillet | tangency-labs/solidcraft#1525 | a 50x50x30 box with r10 vertical rounds, a 5 mm chamfer round the base and a 4 mm fillet where the chamfer meets the wall, shelled 2 mm open at the top | invariants | FAIL: step 5 (solid.shell): offset: only bodies with planes, cylinders, cones, spheres and tori (a face at [10.00, 0.00, 6.66]) | FAIL: step 4 (solid.fillet): SMLib fillet: SMLib's check refuses the result: 3 failed tests: SmBrep::Test #59 Tolerance: Edge tolerance relative to brep tolerance (of |
| shell/1972-shell-one-half-sphere-leaves-the-other | tangency-labs/solidcraft#1972 | a sphere split into two hemispheres; shelling the flat face of one must hollow that half only, the other half stays solid | analytic | FAIL: smlib_check SMLib check: 4 failed tests: SmFace::Test #36 Face Near missing Seam: Face Surface Seam has suspicio (want ok) | pass |
| shell/2531-shell-point-pick-after-parameter-edit | tangency-labs/solidcraft#2531 | a shell opened by a point pick keeps opening only that face after a parameter edit moves the body under the stored point | analytic | FAIL: faces 10 (want 11); volume_mm3 17376 (want 22112) | FAIL: volume_mm3 17952 (want 22112) |
| shell/2939-offset-face-sphere | tangency-labs/solidcraft#2939 | Offset Face on a sphere's round face | analytic | pass | pass |
| shell/3103-shell-tapered-cylinder | tangency-labs/solidcraft#3103 | a cone frustum (r20 at the base, r15 at the top, 30 tall) shelled 2 mm open at the top | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([-12.972412489914536, 1.0839936279907245e-9, 29.9 (want ok); smlib_check the operation failed: pcurve of loop 0 use 0 (Some([-12.972412489914536, 1.0839936279907245e-9, 29.9 (want ok) | pass |
| shell/3283-offset-face-cylinder-wall | tangency-labs/solidcraft#3283 tangency-labs/solidcraft#3650 | Offset Face on the outer cylindrical wall of a tube (the picker only accepted planar faces) | analytic | pass | pass |
| shell/3468-offset-face-boss-wall-next-to-fillet | tangency-labs/solidcraft#3468 tangency-labs/solidcraft#3898 | Offset Face on a boss wall whose base has a 2 mm fillet: the boss grows to r 11 and the fillet follows | analytic | FAIL: step 4 (solid.offset_face): offset: a corner whose faces don't meet the same way after the move | FAIL: step 4 (solid.offset_face): SMLib offset faces: SMLib's check refuses the result: 4 failed tests: SmBrep::Test #59 Tolerance: Edge tolerance relative to brep to |
| shell/3506-split-body-then-shell-both-halves | tangency-labs/solidcraft#3506 | a box split in two at z=10, then each half shelled 2 mm open on the mating face | analytic | pass | pass |
| shell/3576-shell-tapered-box-rounded-corners | tangency-labs/solidcraft#3576 tangency-labs/solidcraft#3573 | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([57.81738299786144, 35.84870237103483, 2.0]) to S (want ok); smlib_check the operation failed: pcurve of loop 0 use 1 (Some([55.848702371033994, 37.81738299786145, 2.0]) to (want ok) | FAIL: step 6 (solid.shell): SMLib shell: SMLib's check refuses the result: 12 failed tests: SmBSplineSurface::Test #5 Bad NonMonotonic CPts: SmBSplineSurface Control |
| shell/3669-shell-lofted-square-frustum | tangency-labs/solidcraft#3669 tangency-labs/solidcraft#2990 | a loft between a 40 mm and a 20 mm square 80 mm apart, shelled 2 mm open at the small end | analytic | pass | pass |
| shell/391-deboss-text-on-flange-of-filleted-shelled-body | tangency-labs/solidcraft#391 | text debossed 0.6 mm into the flat flange top of a filleted and shelled tapered housing, well away from the curved walls | invariants | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([42.37656695189378, 23.85763450177594, 3.5]) to S (want ok); smlib_check the operation failed: pcurve of loop 0 use 0 (Some([42.37656695189378, 23.85763450177594, 3.5]) to S (want ok) | not supported yet: step 8 (solid.extrude): not supported yet: SMLib draft extrusion with a straight foot |
| shell/4009-closed-shell-internal-void | tangency-labs/solidcraft#4009 | shell with no face removed: a closed hollow body with a sealed internal void | analytic | FAIL: step 5 (solid.shell): invalid parameters for solid.shell: select 1…1000 faces |
FAIL: step 5 (solid.shell): invalid parameters for solid.shell: select 1…1000 faces |
| shell/4010-shell-open-at-through-hole-wall | tangency-labs/solidcraft#4010 | plate with a through hole shelled 2.5 mm with only the hole's wall removed | analytic | FAIL: step 6 (solid.shell): offset: a corner whose faces don't meet the same way after the move | pass |
| shell/566-shell-swept-bar-with-bend | tangency-labs/solidcraft#566 | a 8x5 bar swept along a line-arc-line path (quarter circle r30 between two 30 mm legs), shelled 0.5 mm open at its start | analytic | FAIL: step 10 (solid.shell): offset: a corner whose faces don't meet the same way after the move | pass |
| shell/745-offset-face-on-body-with-distant-freeform-boss | tangency-labs/solidcraft#745 tangency-labs/solidcraft#3893 | Offset Face on a planar end of a body that has a spline-outlined boss far from the moved face | invariants | FAIL: step 7 (solid.offset_face): offset: only bodies with planes, cylinders, cones, spheres and tori (a face at [35.00, 5.00, 10.00]) | pass |
| shell/745-offset-face-then-cut-boss-away | tangency-labs/solidcraft#745 tangency-labs/solidcraft#3893 | the same end offset, then the boss and the box beyond x=24 cut away, which leaves an analytic body | analytic | FAIL: step 7 (solid.offset_face): offset: only bodies with planes, cylinders, cones, spheres and tori (a face at [35.00, 5.00, 10.00]) | pass |
| sweeps/1093-circular-pattern-of-a-lofted-join-blade | tangency-labs/solidcraft#1093 tangency-labs/solidcraft#1107 | a tapered lofted blade (6 x 3 root embedded 2 mm into a disk, 3 x 1.5 tip) joined to a disk and patterned 9 times round the axis as joins (31 minutes with eight retries, or "cavity ownership is ambiguous") | analytic | pass | pass |
| sweeps/1140-loft-hollow-tube-bands-halved-and-joined | tangency-labs/solidcraft#1140 | two hollow lofted tube bands (outer r 30, bore r 18 on R100, 5 sections each, 45 degrees each), each cut in half through its axis plane z = 0 and the halves joined into one body ("no result" after ten minutes of fallbacks) | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 3 (Some([91.92386223510539, 91.92386223510539, -1.2621774 (want ok) | pass |
| sweeps/1184-loft-ring-sections-keep-the-hole | tangency-labs/solidcraft#1184 tangency-labs/solidcraft#1254 tangency-labs/solidcraft#2435 tangency-labs/solidcraft#2447 | a loft between two ring sections (outer r 20, inner r 12) 20 mm apart (the hole was dropped and a solid disc built) | analytic | pass | not supported yet: step 9 (solid.loft): not supported yet: SMLib loft through sections with holes |
| sweeps/1269-sweep-parallel-orientation-oblique-cylinder | tangency-labs/solidcraft#1269 | a circle of radius 5 on XY swept with orientation parallel along a path rising 20 mm while leaning 20 mm in x (the profile does not turn: a sheared cylinder) | analytic | pass | pass |
| sweeps/1269-sweep-twisted-square-ninety-degrees | tangency-labs/solidcraft#1269 | a 10 x 10 square swept 40 mm along a straight path while turning 90 degrees about the path | analytic | pass | not supported yet: step 7 (solid.sweep): not supported yet: SMLib sweep with a twist or an end scale |
| sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg | tangency-labs/solidcraft#1391 tangency-labs/solidcraft#1556 | a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 20 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane ("Union: no result") | analytic | FAIL: shells Tube: 2 (want 1) | pass |
| sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg | tangency-labs/solidcraft#1391 tangency-labs/solidcraft#1556 | a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 40 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane ("Union: no result") | analytic | FAIL: shells Tube: 2 (want 1) | pass |
| sweeps/1411-coil-intersected-with-a-cylinder-holding-it | tangency-labs/solidcraft#1411 | a 4-turn coil (centre diameter 40, wire 3 mm, pitch 8) intersected with a cylinder of radius 25 and height 40 that holds it (crash report: unclean exit in solid.coil) | analytic | pass | pass |
| sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs | tangency-labs/solidcraft#1490 | a wall 2.5 mm thick with a 30 x 20 window cut through it and a loft (34 x 24 growing to 38 x 28 over 3.5 mm) joined into the window so that its strips overhang the wall on both faces ("Union: no result" at some wall thicknesses) | analytic | pass | pass |
| sweeps/1666-loft-zigzag-to-flat-rectangle | tangency-labs/solidcraft#1666 | a ruled loft from an 18-vertex zig-zag section to a flat 52 x 3 rectangle with 18 vertices (8 of them collinear), whose twisted ruled faces were exported as crossing triangles | analytic | pass | pass |
| sweeps/1669-mirrored-window-and-loft-on-a-hollow-case | tangency-labs/solidcraft#1669 | a closed hollow box (60 x 60 x 40, 2.5 mm walls) with a window cut in one end wall and a loft joined into it, both mirrored about the middle plane x = 30 onto the far wall ("Union: no result" on the mirror only) | analytic | pass | pass |
| sweeps/1853-revolve-cut-half-a-slot-about-its-centreline | tangency-labs/solidcraft#1853 tangency-labs/solidcraft#1866 | half a slot (r 3, centres 14 apart) revolved a full turn about its own centreline, which lies in the top face of a plate, as a cut (no result after about 10 s of retries) | analytic | pass | pass |
| sweeps/1856-disk-and-36-twisted-lofted-blades-joined | tangency-labs/solidcraft#2992 tangency-labs/solidcraft#1856 | a disk joined to 36 patterned twisted lofted blades (each a loft of 9 rectangle sections turning 7.5 degrees apart, rooted 2 mm inside the disk): hang of minutes | analytic | HANG: no result after 180 s | HANG: no result after 180 s |
| sweeps/1866-revolve-half-slot-profile-180 | tangency-labs/solidcraft#1866 | half a slot (r 3, centres 14 apart; the segment before the axis edge comes back to the axis along an arc) revolved 180 deg about its centreline | analytic | pass | pass |
| sweeps/1866-revolve-half-slot-profile-90 | tangency-labs/solidcraft#1866 | half a slot (r 3, centres 14 apart; the segment before the axis edge comes back to the axis along an arc) revolved 90 deg about its centreline | analytic | pass | pass |
| sweeps/2005-closed-sweep-twisted-cut-inside-a-torus | tangency-labs/solidcraft#2005 tangency-labs/solidcraft#2010 | an 8 x 8 square swept a full turn round a circle of radius 30 with a 180 degree twist, cut from a torus (R 30, r 8) that holds it (no result, or minutes) | analytic | pass | not supported yet: step 11 (solid.sweep): not supported yet: SMLib sweep with a twist or an end scale |
| sweeps/2005-closed-sweep-twisted-new-body | tangency-labs/solidcraft#2005 tangency-labs/solidcraft#2010 | an 8 x 8 square swept a full turn round a circle of radius 30 with a 90 degree twist, as a new body (the sweep that closes on itself) | analytic | pass | not supported yet: step 7 (solid.sweep): not supported yet: SMLib sweep with a twist or an end scale |
| sweeps/201-loft-one-guide-rail-cone-frustum | tangency-labs/solidcraft#201 tangency-labs/solidcraft#3371 | a loft from a circle of radius 5 to a circle of radius 10, 20 mm above, guided by one straight rail through (5,0,0) and (10,0,20) | analytic | pass | not supported yet: step 10 (solid.loft): not supported yet: SMLib loft along guide rails |
| sweeps/2056-rib-grows-along-the-sketch-normal-to-the-part | tangency-labs/solidcraft#2056 tangency-labs/solidcraft#2057 | a rib drawn on a plane 20 mm in front of a block (parallel to XZ, a 40 mm line along X) with direction normal, growing toward the block | analytic | pass | pass |
| sweeps/2183-revolve-profile-crosses-the-axis-refused | tangency-labs/solidcraft#2453 tangency-labs/solidcraft#2183 | a rectangle that straddles the revolve axis (x from -5 to 15 about the sketch y axis) | invariants | pass | pass |
| sweeps/2295-revolve-cut-torus-by-an-overlapping-ring | tangency-labs/solidcraft#2295 | a torus (R 10, r 5) cut by a disc of radius 5 centred at (15,0) in the XZ plane revolved about Z (the disc overlaps the torus tube) | analytic | pass | pass |
| sweeps/2435-loft-rectangular-ring-sections | tangency-labs/solidcraft#2435 tangency-labs/solidcraft#2447 | a loft between two rectangular ring sections (a rectangle with a rectangular hole), 24 mm apart, tapering outer 40 x 30 to 28 x 20 and hole 20 x 14 to 12 x 6 | analytic | pass | not supported yet: step 9 (solid.loft): not supported yet: SMLib loft through sections with holes |
| sweeps/2516-revolve-about-a-named-construction-axis | tangency-labs/solidcraft#3796 tangency-labs/solidcraft#3619 tangency-labs/solidcraft#2516 | a rectangle revolved about a construction axis picked by name ("unknown sketch line Axis1") |
analytic | FAIL: step 5 (solid.revolve): unknown sketch line Axis1 |
FAIL: step 5 (solid.revolve): unknown sketch line Axis1 |
| sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore | tangency-labs/solidcraft#2552 | a square-wire coil (diameter 10, section 0.9 inside, pitch 1.5, height 10) cut as a helical groove into the wall of a bore of radius 4.1 in a 30 x 30 x 12 block (crash report: unclean exit in solid.coil) | analytic | HANG: no result after 180 s | CRASH: process exited (signal: 11 (SIGSEGV) (core dumped)) without a result: |
| sweeps/2570-loft-circle-to-a-non-star-shaped-comb | tangency-labs/solidcraft#2570 tangency-labs/solidcraft#3670 | a loft between a circle and a 20-edge comb outline (not star-shaped from its centroid: the teeth turn the vertex directions back on themselves), 40 mm apart (the circle was wound about ten times, the app froze) | invariants | FAIL: record_valid geometry: portable B-rep: face 21 loop 0: outer loop runs clockwise in (u, v) (signed area -1.154845 (want ok); smlib_check SMLib check: 4 failed tests: SmBrep::Test #4 Bad Gap: Edge/Surface gap across Edgeuse larger than to (want ok); bbox.min [-18.151366, -22.51753, -0] (want [-18, -2, 0]); bbox.max [20.634025, 37.723464, 40] (want [18, 18, 40]) | FAIL: step 7 (solid.loft): invalid input: an arc turns more than once |
| sweeps/2607-revolve-axis-outside-the-sketch-plane-refused | tangency-labs/solidcraft#3736 tangency-labs/solidcraft#2607 | a profile on the XZ plane revolved about the world Y axis, which does not lie in the sketch plane | invariants | pass | pass |
| sweeps/2667-revolve-half-disc-sphere | tangency-labs/solidcraft#2667 | a half disc of radius 6 on the axis revolved a full turn (mutation survivor: half_disc area factor) | analytic | pass | pass |
| sweeps/2667-revolve-half-disc-three-quarters | tangency-labs/solidcraft#2667 | the same half disc revolved 270 degrees (mutation survivor: full_circle test of the sweep angle) | analytic | pass | pass |
| sweeps/2667-sweep-hostile-end-scale-refused | tangency-labs/solidcraft#2667 | a sweep with an end scale of 500 (the engine allows 0.01 to 100): the option check (SweepControl::check) must refuse it | invariants | pass | pass |
| sweeps/271-loft-cut-with-targets-keeps-the-bystander | tangency-labs/solidcraft#271 tangency-labs/solidcraft#286 tangency-labs/solidcraft#299 | a loft cut limited by targets to one body while a second body lies inside the loft | analytic | pass | pass |
| sweeps/2820-pipe-cut-oblique-hole-through-a-block | tangency-labs/solidcraft#2820 | a pipe of diameter 6 cut through a 40 x 40 x 20 block along a line leaning 30 degrees from the vertical | analytic | pass | pass |
| sweeps/2820-pipe-hollow-with-a-wall-along-a-bend | tangency-labs/solidcraft#2820 | a hollow pipe (outer diameter 10, wall 2) along a path of two lines joined by a tangent R20 quarter arc | analytic | pass | FAIL: step 6 (solid.pipe): SMLib sweep: SMLib failed (status 1001) |
| sweeps/2847-loft-rectangles-turning-through-half-a-turn | tangency-labs/solidcraft#2847 tangency-labs/solidcraft#3452 | a loft through 19 identical 6 x 4 rectangles on planes turning about the Z axis every 10 degrees from 0 to 180 degrees, centred 30 mm from the axis (volume came out 6 % of the expected at 180 degrees, no error) | analytic | FAIL: smlib_check SMLib check: 1 failed tests: SmBrep::Test #8 Bad Infinite Region: m_pInfiniteRegion is incorrect [ow (want ok); volume_mm3 125.665718 (want 2261.946711); bbox.max [33, 33.222229, 2] (want [33, 33, 2]) | FAIL: volume_mm3 -127.306602 (want 2261.946711); bbox.max [33, 33.208374, 2] (want [33, 33, 2]) |
| sweeps/2862-three-pipes-meeting-at-one-point | tangency-labs/solidcraft#2862 | three pipes of diameter 4.4 and length 20 along +X, +Y and +Z, all ending at the origin, joined (a non-planar tripod junction: kernel panics, then no result) | analytic | FAIL: step 9 (solid.pipe): boolean Union: the operation failed: no result | not supported yet: step 7 (solid.pipe): not supported yet: SMLib sweep along a path of points (a 3D sketch curve) |
| sweeps/2891-twisted-sweep-cut-through-a-tube | tangency-labs/solidcraft#2891 tangency-labs/solidcraft#3695 | a 20 x 20 square swept 250 mm along the axis of a tube (ID 20, OD 30, 250 long) with a 30 degree twist, cut from it (the twisted cut froze the app) | analytic | FAIL: step 12 (solid.sweep): boolean Cut: the operation failed: no result | not supported yet: step 12 (solid.sweep): not supported yet: SMLib sweep with a twist or an end scale |
| sweeps/2947-revolve-300-degrees-intersected-by-a-plate | tangency-labs/solidcraft#2947 tangency-labs/solidcraft#2948 | a rectangle section revolved 300 degrees about Z, then intersected with a plate (slab /y/ <= 5) crossing the ring at the start/end gap side and the far side (boolean gave up: "loop not inside any face piece") | analytic | pass | pass |
| sweeps/3006-second-sweep-from-a-plane-along-a-closed-path | tangency-labs/solidcraft#3006 | a circle of radius 3 on a plane at 0.5 of a closed circular path (R 30) swept round it, then a 5 x 5 square on a plane at 0.75 swept round the same path and joined (it did not follow the path) | analytic | FAIL: smlib_check SMLib check: 12 failed tests: SmFace::Test #36 Face Near missing Seam: Face Surface Seam has suspici (want ok) | FAIL: step 13 (solid.sweep): SMLib export: the mapped B-rep does not validate: portable B-rep: a closed shell bounds two regions and encloses one |
| sweeps/3088-coil-thread-joined-flush-with-a-cylinder | tangency-labs/solidcraft#3088 tangency-labs/solidcraft#3758 | a 4-turn square coil (4 mm wire, pitch 9, outer diameter 30.8, section inside) joined round a cylinder of radius 15 and height 40, its ends flush with the cylinder end faces (hang of several minutes, crash report) | analytic | HANG: no result after 180 s | pass |
| sweeps/3111-loft-rectangular-ring-to-circular-ring | tangency-labs/solidcraft#3111 | a loft from a rectangular ring (two nested rectangles) to a circular ring (two concentric circles) 30 mm above: a hollow transition piece | invariants | pass | not supported yet: step 9 (solid.loft): not supported yet: SMLib loft through sections with holes |
| sweeps/3156-revolve-join-end-faces-flush-with-a-face | tangency-labs/solidcraft#3156 tangency-labs/solidcraft#3224 | a rectangle revolved plus and minus 90 degrees about an axis in a plate top face: both planar end faces lie in that face and the join needed a tool nudge | analytic | pass | pass |
| sweeps/3191-revolve-cut-leaves-a-cone | tangency-labs/solidcraft#3911 tangency-labs/solidcraft#3191 | a triangle sharing the cylinder side and top rim revolved as a cut to leave a cone (the cut never completed) | analytic | FAIL: step 5 (solid.revolve): invalid input: the profile crosses the revolve axis | FAIL: step 5 (solid.revolve): invalid input: the profile crosses the revolve axis |
| sweeps/3326-loft-20mm-square-to-a-circle | tangency-labs/solidcraft#3326 tangency-labs/solidcraft#3402 | a loft from a 20 mm square to a circle of radius 10 offset 20 mm (the loft tool symbol): the loft geometry looked wrong | invariants | pass | pass |
| sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle | tangency-labs/solidcraft#3345 | a 4 x 3 profile drawn at the middle of the bottom line of a closed 60 x 40 rounded-rectangle path (corner radius 8) and swept round the whole path (walls offset, fillets turned the wrong way) | analytic | FAIL: volume_mm3 2225.797307 (want 2235.185789); bbox.min [-45.497256, -35.488093, -1.5] (want [-32, -22, -1.5]); bbox.max [45.497256, 35.488093, 1.5] (want [32, 22, 1.5]) | FAIL: bbox.min [-46.165028, -36.165028, -1.5] (want [-32, -22, -1.5]); bbox.max [46.165028, 36.165028, 1.5] (want [32, 22, 1.5]) |
| sweeps/3412-loft-sections-in-one-plane-refused | tangency-labs/solidcraft#3412 | a loft through two circles drawn on the same plane (no volume between them; it built a flat zero-volume body and reported success) | invariants | pass | pass |
| sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner | tangency-labs/solidcraft#3505 | the inner side wall of the vertical leg of a mitred swept bar extruded outward by 3 mm (the wall is a B-spline net in a plane, "the selected planar face no longer exists") | analytic | FAIL: step 9 (solid.extrude): invalid parameters for face profile: the selected planar face no longer exists; choose another face or an explicit fixed plane |
not supported yet: step 8 (solid.sweep): not supported yet: SMLib sweep along a path with corners (SMLib's sweep follows smooth paths) |
| sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam | tangency-labs/solidcraft#3528 | a ball of radius 4 centred on the dome of a revolved mushroom cap (azimuth 15 degrees, across an internal seam of the revolved faces), cut from it: removed nearly the whole ball | analytic | pass | FAIL: volume_mm3 48118.357835 (want 46424.505878) |
| sweeps/3541-loft-two-circles-into-a-cone-flipped-plane | tangency-labs/solidcraft#3541 | a loft from a circle of radius 8 to a circle of radius 20, 30 mm below it (sections given small first, the small one drawn on a plane turned over (normal pointing down)): "a horizontal narrowing is created" instead of a cone | analytic | pass | pass |
| sweeps/3541-loft-two-circles-into-a-cone-same-sense | tangency-labs/solidcraft#3541 | a loft from a circle of radius 8 to a circle of radius 20, 30 mm below it (sections given small first, the small one drawn on a plane facing the same way): "a horizontal narrowing is created" instead of a cone | analytic | pass | pass |
| sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder | tangency-labs/solidcraft#3832 | a 7-turn coil (centre diameter 80, wire 1 mm, pitch -2 so it winds downward) cut from a cylinder that holds it entirely (boolean Cut: no result) | analytic | pass | pass |
| sweeps/3862-coil-square-wire-outside-the-diameter | tangency-labs/solidcraft#3862 tangency-labs/solidcraft#3915 | a clockwise 5-turn coil of 4 mm square wire placed outside a 40 mm diameter, pitch 8 (the section, position and direction parameters) | analytic | pass | pass |
| sweeps/3897-sweep-ring-along-a-short-arc-joined-to-a-collar | tangency-labs/solidcraft#3897 | a ring profile (radii 79.815 and 78.285) swept along a 22.5 degree arc of radius 94.815 whose start is at the ring centre, joined to a ring-shaped collar under the profile (froze at "Computing") | analytic | pass | pass |
| sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder | tangency-labs/solidcraft#3936 | a loft from the circle on top of a cylinder (r 10, height 15) to a 40 x 30 rectangle 30 mm above, joined to the cylinder (builds as a new body in 2 ms, the join never returns) | invariants | HANG: no result after 180 s | pass |
| sweeps/396-loft-join-standing-on-a-box-face | tangency-labs/solidcraft#396 tangency-labs/solidcraft#577 | a conical loft standing on a box top face, joined to the box (one body reported, two touching shells in the result) | analytic | pass | pass |
| sweeps/4007-revolve-half-disc-horn-torus-270-degrees | tangency-labs/solidcraft#4007 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | pass |
| sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face | tangency-labs/solidcraft#4008 | a 7 x 21 rectangle 2.6 mm from a block vertical edge revolved as a symmetric 180 degree cut about that edge: both end faces of the tool lie in the block left face (refused as "could not be computed reliably") | analytic | FAIL: step 6 (solid.revolve): the cut could not be computed reliably: it would change the body away from the tool, at (-0.924, 12.796, 2.000) (outside the tool's regi | pass |
| sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern | tangency-labs/solidcraft#4056 tangency-labs/solidcraft#4080 | a surface loft between a vertical line on XZ (bow) and a slanted line in the plane x = 100 (stern), bow to stern, guided by a keel rail lying in the bow sketch plane and a sheer rail at z = 20 (refused: "a guide rail crosses section 2's plane") | analytic | pass | pass |
| sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow | tangency-labs/solidcraft#4056 tangency-labs/solidcraft#4080 | a surface loft between a vertical line on XZ (bow) and a slanted line in the plane x = 100 (stern), stern to bow, guided by a keel rail lying in the bow sketch plane and a sheer rail at z = 20 (refused: "a guide rail crosses section 2's plane") | analytic | FAIL: step 13 (surface.loft): invalid input: a guide rail crosses section 2's plane 100.000 mm from its curves: a rail has to pass through every section | FAIL: step 13 (surface.loft): invalid input: a guide rail crosses section 2's plane 100.000 mm from its curves: a rail has to pass through every section |
| sweeps/443-loft-intersect-cone-meets-wall-below-top | tangency-labs/solidcraft#443 | a cylinder (r 35, h 10) intersected with a conical loft (r 45 at z = -1 to r 33 at z = 11) that crosses its wall 1 mm below the top face (body came back unchanged) | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([-34.0, 7.915749896921301e-14, 10.0]) to Some([34 (want ok) | pass |
| sweeps/450-revolve-spherical-shell-sketched-off-the-origin | tangency-labs/solidcraft#450 tangency-labs/solidcraft#452 | a half ring between two arcs (both radial lines on the axis) revolved a full turn from a sketch plane 10 mm above the origin (volume +34 %) | analytic | CRASH: process exited (signal: 11 (SIGSEGV) (core dumped)) without a result: | FAIL: shells Body1: 2 (want 1); record_valid the operation failed: lumps: cannot mesh a complete shell boundary (want ok); smlib_check the operation failed: lumps: cannot mesh a complete shell boundary (want ok); volume_mm3 294558.478017 (want 241560.724326) |
| sweeps/487-cut-disc-by-revolved-adjacent-profiles | tangency-labs/solidcraft#487 tangency-labs/solidcraft#490 | a disc cut by the body made from two adjacent profiles revolved on the axis, around the disc flat end | analytic | pass | pass |
| sweeps/487-revolve-two-adjacent-profiles-on-the-axis | tangency-labs/solidcraft#487 tangency-labs/solidcraft#490 | two rectangles sharing an edge, both resting on the axis, revolved together (zero-area faces along the axis) | analytic | pass | pass |
| sweeps/494-extrude-the-flange-face-of-a-fresh-revolve | tangency-labs/solidcraft#726 tangency-labs/solidcraft#494 tangency-labs/solidcraft#2114 | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | pass |
| sweeps/561-extrude-the-end-face-of-a-loft | tangency-labs/solidcraft#561 tangency-labs/solidcraft#677 | the small end face of a square-to-square loft (40 mm side to 20 mm over 40 mm) extruded 10 mm (loft faces had no attachable source) | analytic | pass | pass |
| sweeps/561-extrude-the-end-face-of-a-sweep | tangency-labs/solidcraft#561 tangency-labs/solidcraft#677 | the end cap of a mitred swept bar (8 x 5 section, 30 up then 40 across) extruded 6 mm further along the path | analytic | FAIL: shells Bar: 2 (want 1); record_valid the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); smlib_check the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok) | not supported yet: step 8 (solid.sweep): not supported yet: SMLib sweep along a path with corners (SMLib's sweep follows smooth paths) |
| sweeps/561-extrude-the-start-face-of-a-coil | tangency-labs/solidcraft#561 tangency-labs/solidcraft#677 | the start face of a 3-turn square-wire coil (4 mm wire, pitch 8, centre diameter 40) extruded 5 mm | analytic | pass | pass |
| sweeps/726-revolve-full-turn-planar-faces-whole | tangency-labs/solidcraft#726 tangency-labs/solidcraft#1687 | a flanged hub profile (six edges, none on the axis) revolved a full turn: the planar faces must come out whole, not as three patches | analytic | pass | pass |
| sweeps/726-revolve-partial-turn-planar-faces-whole | tangency-labs/solidcraft#726 tangency-labs/solidcraft#1718 | the same flanged hub profile revolved 240 degrees: its planar faces (three annular sectors and two end faces) must come out whole | analytic | pass | pass |
| sweeps/757-surface-loft-ruled-strip-between-two-lines | tangency-labs/solidcraft#757 tangency-labs/solidcraft#847 | a surface loft between the line (0,0,0)-(10,0,0) and the line (0,0,20)-(10,6,20): a ruled (bilinear) strip | analytic | pass | pass |
| sweeps/757-surface-revolve-line-cone-frustum-sheet | tangency-labs/solidcraft#757 tangency-labs/solidcraft#824 | a line from (5,0) to (10,20) revolved a full turn into a surface body (a cone frustum wall, no caps) | analytic | pass | pass |
| sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc | tangency-labs/solidcraft#757 tangency-labs/solidcraft#843 | a slanted line (from (20,0,0) to (30,0,10)) swept as a surface round a quarter circle of radius 20 about Z | analytic | pass | pass |
| sweeps/771-sweep-end-scale-cone-frustum | tangency-labs/solidcraft#771 tangency-labs/solidcraft#1269 | a circle of radius 5 swept 30 mm along a straight path with end scale 2 | analytic | FAIL: faces 4 (want 3) | not supported yet: step 7 (solid.sweep): not supported yet: SMLib sweep with a twist or an end scale |
| sweeps/771-sweep-one-guide-rail-cone-frustum | tangency-labs/solidcraft#771 tangency-labs/solidcraft#1806 | a circle of radius 5 swept 20 mm up a straight path with one guide rail from its point (5,0,0) to (10,0,20) | analytic | pass | not supported yet: step 10 (solid.sweep): not supported yet: SMLib sweep along guide rails |
| sweeps/771-sweep-two-guide-rails-cone-frustum | tangency-labs/solidcraft#771 tangency-labs/solidcraft#1806 | a circle of radius 5 swept 20 mm up a straight path between two guide rails from (5,0,0) to (10,0,20) and from (-5,0,0) to (-10,0,20) | analytic | pass | not supported yet: step 11 (solid.sweep): not supported yet: SMLib sweep along guide rails |
| sweeps/793-coil-cut-by-a-box-above-a-plane | tangency-labs/solidcraft#793 | the same coil trimmed flat by cutting away everything above z = 12.5 with a box (trimming a coil to length) | analytic | HANG: no result after 180 s | FAIL: step 3 (solid.combine): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([13.434874451541004, 13.434916434571074, 12.499999999999998]) to Some([13.43487445154 |
| sweeps/793-coil-split-by-a-plane-across-its-axis | tangency-labs/solidcraft#793 | a 6-turn coil (centre diameter 40, wire 2 mm, pitch 4) split by the plane z = 12.5 square to its axis ("boolean Intersect: no result") | analytic | HANG: no result after 180 s | FAIL: step 2 (solid.split_body): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([13.434874451540997, 13.434916434571077, 12.499999999999998]) to Some([13.43487445 |
| sweeps/844-join-two-overlapping-swept-arc-walls | tangency-labs/solidcraft#844 | two swept walls (12 mm thick, 60 mm high) along concentric half circles of radius 50 and 58 turned 90 degrees apart, overlapping in thickness by 4 mm over a quarter turn and sharing the planes z = 0 and z = 60 (join gave an error, minutes, or an open body) | analytic | FAIL: shells WallA: 2 (want 1); record_valid the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); smlib_check the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok) | FAIL: step 14 (solid.sweep): SMLib boolean: operation: SMLib failed (status 1006) |
| sweeps/881-loft-zigzag-pleat-vertex-pairing | tangency-labs/solidcraft#881 tangency-labs/solidcraft#956 | a ruled loft between two 18-vertex zig-zag sections with the same start vertex and winding, whose first-vertex direction is ambiguous from the section centroid | analytic | pass | pass |
| sweeps/96-loft-cut-box-sections-pad-first | tangency-labs/solidcraft#122 tangency-labs/solidcraft#96 | a loft cut through a 100 x 60 x 30 block from its whole 100 x 60 outline at z = 20 (edges flush with the side faces) down to a 10 x 10 pad in a corner at z = 11, sections given pad first (the cut panicked for one order) | analytic | FAIL: shells Basin: 2 (want 1); record_valid the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); smlib_check the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); body_count 1 (want 2) | FAIL: step 8 (solid.loft): SMLib boolean: export: SMLib export: the mapped B-rep does not validate: portable B-rep: an open, wire or vertex shell lies in one region |
| sweeps/96-loft-cut-box-sections-top-first | tangency-labs/solidcraft#122 tangency-labs/solidcraft#96 | a loft cut through a 100 x 60 x 30 block from its whole 100 x 60 outline at z = 20 (edges flush with the side faces) down to a 10 x 10 pad in a corner at z = 11, sections given top first (the cut panicked for one order) | analytic | FAIL: shells Basin: 2 (want 1); record_valid the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); smlib_check the operation failed: lumps: shell boundaries intersect or touch; cavity ownership is ambiguous (want ok); body_count 1 (want 2) | FAIL: step 8 (solid.loft): SMLib boolean: export: SMLib export: the mapped B-rep does not validate: portable B-rep: an open, wire or vertex shell lies in one region |
| sweeps/96-shallow-loft-cut-starting-in-the-top-face | tangency-labs/solidcraft#96 | a loft cut from a 556.68 x 99 rectangle on the top face of a 900 x 480 x 160 slab down 4 mm to an 80 x 80 square (a kernel panic in healing; the sides are about 0.9 degrees from horizontal) | analytic | pass | pass |
| sweeps/96-sweep-rectangle-round-a-mitred-corner | tangency-labs/solidcraft#96 | an 8 x 5 rectangle swept along a path of a 30 mm vertical line and a 40 mm horizontal line meeting at a sharp corner (walls mitred) | analytic | pass | not supported yet: step 8 (solid.sweep): not supported yet: SMLib sweep along a path with corners (SMLib's sweep follows smooth paths) |
| sweeps/968-loft-hollow-elbow-60deg-5sections | tangency-labs/solidcraft#968 tangency-labs/solidcraft#1084 | a bent tube (circles r 30 lofted through 5 sections along an R100 arc turning 60 degrees) with a bore (r 18, sections running 5 mm of arc past both ends) cut out of it: a hollow elbow ("no result" for some section counts, not their neighbours) | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 1 (Some([100.0000000000009, 0.0, -17.999999999999996]) to (want ok) | pass |
| sweeps/968-loft-hollow-elbow-90deg-10sections | tangency-labs/solidcraft#968 tangency-labs/solidcraft#1084 | a bent tube (circles r 30 lofted through 10 sections along an R100 arc turning 90 degrees) with a bore (r 18, sections running 5 mm of arc past both ends) cut out of it: a hollow elbow ("no result" for some section counts, not their neighbours) | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([6.123235057019227e-15, 100.00000000000101, -18.0 (want ok) | pass |
| tessellation/1263-concave-arc-knife-edge-plate | tangency-labs/solidcraft#1263 | a plate with a concave quarter-round wall that meets the back face tangentially at a knife-edge tip (a box and a box less a cylinder, united): its display tessellation used to fail with 'boundary does not lie on the surface' before anything was filleted | analytic | pass | pass |
| tessellation/1615-crossed-lofted-tubes | tangency-labs/solidcraft#1615 tangency-labs/solidcraft#1653 | two lofted tubes that cross and are joined (the bike-frame case): the trimmed loft faces along the intersection curves used to mesh with a flat sheet across the tube and slivers inside it | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([-10.000000000000243, 5.32800127382499e-10, -9.99 (want ok); smlib_check the operation failed: pcurve of loop 0 use 0 (Some([-10.000000000000243, 5.32800127382499e-10, -9.99 (want ok) | pass |
| tessellation/1648-sphere-touches-box-edge-union | tangency-labs/solidcraft#1648 tangency-labs/solidcraft#1850 | a sphere that touches a box's bottom edge at one point: the union leaves a sliver face pinched to zero height, whose loop touches itself within tolerance, and it must still mesh | analytic | pass | pass |
| tessellation/1666-loft-18-gon-ruled-sides | tangency-labs/solidcraft#1666 tangency-labs/solidcraft#1670 | a loft between two 18-vertex polylines whose side faces are twisted ruled (bilinear) patches: each used to be exported as two flat triangles with crossing diagonals | analytic | pass | pass |
| tessellation/1666-loft-twisted-square | tangency-labs/solidcraft#1666 tangency-labs/solidcraft#1670 | a loft from a 20x20 square to the same square turned 45 degrees, 30 mm higher: its four side faces are strongly twisted ruled patches, the case a two-triangle mesh gets visibly wrong | analytic | pass | pass |
| tessellation/1753-bowl-rim-cut-by-cylinder | tangency-labs/solidcraft#1753 | a revolved bowl whose rim is cut by a large cylinder (R320, axis across the bowl): the cut edge is an intersection curve between the cylinder and the cone walls, whose two faces used to put different vertices on it, so the STL/3MF export had a 0.001 mm crack | analytic | FAIL: watertight Bowl: 3 open, 0 over-shared mesh edges (want no open edges) | pass |
| tessellation/1813-sphere-lens-thinner-than-tolerance | tangency-labs/solidcraft#2712 tangency-labs/solidcraft#1813 | a sphere whose centre lies on a box's top face, poking out of the box's side as a lens-shaped face thinner than the mesh tolerance; the face must still be meshed | analytic | pass | pass |
| tessellation/2069-chamfered-ring-notch-moved-far | tangency-labs/solidcraft#2069 | a 210-degree ring with a chamfered outer edge, notched through its chamfer cone and then moved 1000 mm: where the notch meets the cone the mesh used to leave a crack, and the measured volume then grew with the distance from the origin | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 0 (Some([1025.9229635399038, 2.0, 9.999999999999998]) to (want ok) | pass |
| tessellation/2528-stadium-joined-with-overlapping-cylinder | tangency-labs/solidcraft#2528 | a rounded slot (a box with a half-cylinder on each end) joined with a cylinder that overlaps one end: the cylinder walls meet along vertical seams and intersection edges, where wedge-shaped mis-tessellated facets showed up | analytic | pass | pass |
| tessellation/311-ramp-cut-cylinder-blank | tangency-labs/solidcraft#311 | an inclined cut across a round blank, which used to pinch the cylindrical wall inward (a 4.4 mm chord deficit) in the display and STL mesh | analytic | pass | pass |
| tessellation/466-revolved-cone-tip-stays-smooth | tangency-labs/solidcraft#466 | a six-line profile revolved a full turn about its first line, with a cone ending in a point: the tip came out with dents every 120 degrees instead of a smooth cone (rebuilt as a pencil-like profile with a collinear frustum and tip; the original design is not in the report) | analytic | pass | pass |
| tessellation/784-stl-open-edges-filleted-and-drilled | tangency-labs/solidcraft#784 tangency-labs/solidcraft#811 | two bodies whose STL export used to have open edges where faces were meshed apart: a 40x30x20 box with all twelve edges rounded 2 mm, and a cylinder R15 x 20 with a coaxial 6 mm bore | analytic | pass | FAIL: watertight RoundedBox: 0 open, 8 over-shared mesh edges (want no open edges); record_valid the operation failed: pcurve of loop 0 use 2 (Some([2.0, 30.0, 2.0]) to Some([0.0, 28.0, 2.0])): the (want ok); smlib_check the operation failed: pcurve of loop 0 use 2 (Some([2.0, 30.0, 2.0]) to Some([0.0, 28.0, 2.0])): the (want ok) |
| tessellation/818-blind-hole-splits-vertical-edges | tangency-labs/solidcraft#818 | a blind hole cut into a ring whose six concave corners are filleted: the cut used to split every vertical edge (the outer seam and all twelve fillet tangent edges) at the hole's depth, and the fillet corners drew black | analytic | pass | pass |
| tessellation/819-cup-pocket-splits-wall-seam | tangency-labs/solidcraft#819 tangency-labs/solidcraft#921 | a disc with a pocket that splits the outer cylinder wall's seam edges at the pocket floor: the wall used to be meshed with fans cutting through the disc, so the measured volume and the STL read too small | analytic | pass | pass |
| threads/1250-external-m10x1.5-shaft-full-length | tangency-labs/solidcraft#1250 | a modelled external M10 thread over the whole length of a 10 mm shaft (8 turns) | analytic | FAIL: smlib_check SMLib check: 6 failed tests: SmEdgeuse::Test #11 Bad UVTrimCurve: Edgeuse->UVTrimCurve has zero leng (want ok) | FAIL: step 2 (solid.thread): SMLib boolean: SMLib's check refuses the result: 2 failed tests: SmFace::Test #34 Face has partially Coincident Edges: Face has partially |
| threads/1395-long-external-m6-thread-24-turns | tangency-labs/solidcraft#1395 | a long modelled external thread: M6 over a 24 mm shaft (24 turns), the kind that once ran out of depth in the boolean | analytic | FAIL: smlib_check SMLib check: 40 failed tests: SmLoop::Test #2 Bad Loop Orient: A UpperLoopuse->Edgeuse's 'Inside' is (want ok) | FAIL: step 2 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 1 (Some([-1.738532668045337, 1.7385379467804876, -2.949029909160572e-17]) to Some([-1.73853839 |
| threads/1443-m5x0.7-thread-in-5mm-hole | tangency-labs/solidcraft#1443 tangency-labs/solidcraft#3060 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853 | a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole | analytic | pass | pass |
| threads/1995-m8x1-thread-in-7mm-hole | tangency-labs/solidcraft#1995 | an M8x1 modelled thread in a 7 mm hole through a block (the report: the thread also changed the block's outer surface and made too many faces) | analytic | FAIL: smlib_check SMLib check: 45 failed tests: SmEdgeuse::Test #11 Bad UVTrimCurve: Edgeuse->UVTrimCurve has zero len (want ok) | FAIL: step 3 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 1 (Some([2.862740053704183, 2.0136333789738825, 1.4963877373859766]) to Some([-2.8627400537041 |
| threads/2038-cut-threaded-stud-from-bored-block | tangency-labs/solidcraft#2038 | cutting an externally threaded stud out of a block bored at the tap drill (to make the internal thread): the boolean found no result | analytic | HANG: no result after 180 s | FAIL: step 4 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([6.735685053790036, 6.735671302570509, -5.000000000000002]) to Some([4.018069973126635 |
| threads/2038-internal-then-external-thread-on-one-body | tangency-labs/solidcraft#2038 | two modelled threads on one body, an internal one then an external one (the second was refused: no cylindrical face there to thread) | analytic | HANG: no result after 180 s | FAIL: step 3 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 4 (Some([-2.583065773355961, 6.236083486130154, -3.382710778154774e-17]) to Some([0.6966280122 |
| threads/2038-join-two-threaded-bodies | tangency-labs/solidcraft#2038 | joining a body with an internal modelled thread to one with an external modelled thread, touching in a plane (the join ran for over ten minutes) | analytic | HANG: no result after 180 s | FAIL: step 3 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 4 (Some([-2.583065773355961, 6.236083486130154, -3.382710778154774e-17]) to Some([0.6966280122 |
| threads/2115-tapped-hole-drill-is-major-minus-pitch | tangency-labs/solidcraft#3311 tangency-labs/solidcraft#2115 tangency-labs/solidcraft#2367 tangency-labs/solidcraft#2440 tangency-labs/solidcraft#2441 | tapped holes (Hole with a thread size, no diameter) are drilled at the tap drill, not at the major diameter | analytic | pass | pass |
| threads/2152-m3x0.2-thread-in-3mm-hole | tangency-labs/solidcraft#2152 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853 | a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole | analytic | pass | pass |
| threads/2193-modelled-m33x3.5-thread | tangency-labs/solidcraft#2193 tangency-labs/solidcraft#2263 tangency-labs/solidcraft#4153 | a modelled M33x3.5 thread, a size the thread menu lacked (designation typed by hand), on a 33 mm shaft (4 turns) | analytic | FAIL: smlib_check SMLib check: 6 failed tests: SmEdgeuse::Test #11 Bad UVTrimCurve: Edgeuse->UVTrimCurve has zero leng (want ok) | FAIL: step 2 (solid.thread): SMLib boolean: SMLib's check refuses the result: 3 failed tests: SmFace::Test #34 Face has partially Coincident Edges: Face has partially |
| threads/2209-fine-m44x1-thread-on-shaft | tangency-labs/solidcraft#2209 | a fine modelled thread on a large shaft (M44x1 on a 44 mm shaft, 4 turns), which once cut about 9% too much | analytic | HANG: no result after 180 s | FAIL: step 2 (solid.thread): SMLib boolean: SMLib's check refuses the result: 1 failed tests: SmFace::Test #34 Face has partially Coincident Edges: Face has partially |
| threads/2209-m44x1.5-thread-on-flange-hub | tangency-labs/solidcraft#2209 | a full-diameter M44x1.5 modelled thread on the hub of a flange, which once failed to rebuild a closed shell | analytic | FAIL: smlib_check SMLib check: 351 failed tests: SmEdgeuse::Test #11 Bad UVTrimCurve: Edgeuse->UVTrimCurve has zero le (want ok) | FAIL: step 3 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([17.993100249475514, 12.658923469723806, 12.61506452654108]) to Some([-17.993100249475 |
| threads/2369-m8-thread-in-6.3mm-hole-refused | tangency-labs/solidcraft#2369 tangency-labs/solidcraft#2688 tangency-labs/solidcraft#2853 tangency-labs/solidcraft#1018 | a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole | analytic | pass | pass |
| threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole | tangency-labs/solidcraft#2406 | an M8 modelled thread in a 6.8 mm pilot hole (the case where the thread 'was not visible') | analytic | FAIL: smlib_check SMLib check: 19 failed tests: SmLoop::Test #2 Bad Loop Orient: A UpperLoopuse->Edgeuse's 'Inside' is (want ok) | FAIL: step 3 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 1 (Some([-2.780947480741209, -1.9561009967174812, 1.2599347416400593]) to Some([2.780947480741 |
| threads/2526-three-modelled-threads-in-one-body | tangency-labs/solidcraft#2526 | three modelled threads, internal and external, in one body with a hub and a plain hole beside the bore (each thread used to facet the rest of the part and the next thread was refused) | analytic | FAIL: step 6 (solid.thread): no cylindrical face there to thread | FAIL: step 5 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([-3.4104950138828145, -2.089969146215104, 30.000000000000007]) to Some([-0.93378481328 |
| threads/2705-m14-thread-on-14.6mm-shaft-refused | tangency-labs/solidcraft#2705 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853 | a modelled thread on a shaft that isn't the thread's size: refused with the size to use, never a silent change of the shaft | analytic | pass | pass |
| threads/2822-modelled-thread-in-filleted-cube | tangency-labs/solidcraft#2822 | a modelled M3 thread in a hole through a block whose vertical edges are rounded (the fillets showed as black lines after the thread) | analytic | FAIL: smlib_check SMLib check: 173 failed tests: SmFace::Test #34 Face has partially Coincident Edges: Face has partia (want ok) | FAIL: step 7 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([11.022407162037219, 10.719154778204942, 0.24820214174911687]) to Some([8.994053254378 |
| threads/2969-m48x0.75-thread-in-48mm-hole | tangency-labs/solidcraft#2969 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853 | a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole | analytic | pass | pass |
| threads/3311-two-tapped-holes-both-modelled-threaded | tangency-labs/solidcraft#3311 | a second modelled thread on the same body (the first thread faceted every other hole), over each hole's full length | analytic | FAIL: step 5 (solid.thread): no cylindrical face there to thread | FAIL: step 4 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([10.956692141520428, 12.309678320897202, 2.0383000842727483e-17]) to Some([9.043311931 |
| threads/3366-m20-thread-in-20mm-hole | tangency-labs/solidcraft#3366 tangency-labs/solidcraft#3367 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853 | a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole | analytic | pass | pass |
| threads/3368-faceted-prism-pocket-cut-and-boss-join | tangency-labs/solidcraft#3368 | booleans of a finely faceted body (a 1200-sided prism, 1202 flat faces, the kind of body a modelled thread leaves) with box tools: they must finish in bounded time with the exact result, not run for minutes | analytic | pass | pass |
| threads/3368-faceted-prism-with-bore-and-cross-hole | tangency-labs/solidcraft#3368 | a finely faceted body (a 1200-sided prism) with a curved partner: a vertical bore and a horizontal cross hole drilled through it (the case where the B-rep ladder is bounded but must still decide) | analytic | FAIL: record_valid the operation failed: pcurve of loop 0 use 57 (Some([-29.89940005346547, -2.453604579473993, 3.27378 (want ok); smlib_check the operation failed: pcurve of loop 0 use 57 (Some([-29.89940005346547, -2.453604579473993, 3.27378 (want ok); volume_mm3 26829.949748 (want 25792.3465); bbox.min [-30.34151, -30, 0] (want [-30, -30, 0]) | pass |
| threads/3368-two-faceted-prisms-cut-then-joined | tangency-labs/solidcraft#3368 | two finely faceted bodies (1000-sided prisms, flat faces only): a faceted stud cut out of a faceted disc, then a faceted cap joined on top touching in a plane; both booleans must finish in bounded time with the exact result | analytic | pass | HANG: no result after 180 s |
| threads/3914-sketch-on-top-face-of-threaded-rounded-block | tangency-labs/solidcraft#3914 | Create Sketch on the top face of a block with a modelled thread and rounded corners, then a boss from it | analytic | FAIL: step 5 (sketch.create): invalid parameters for sketch.create: face capture work limit exceeded; use an exact body and face index |
FAIL: step 3 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([7.955185675925581, 8.561690443590084, 0.9964288343534452]) to Some([12.04481432407442 |
| threads/3952-modelled-thread-in-blind-hole-of-revolved-ring | tangency-labs/solidcraft#3952 | a modelled thread in a small blind hole drilled into a revolved ring, off its axis ('faceted boolean: inconsistent volumes') | analytic | FAIL: smlib_check SMLib check: 269 failed tests: SmFace::Test #34 Face has partially Coincident Edges: Face has partia (want ok) | FAIL: step 9 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([20.516265215511172, -1.0755765706655467, 22.0]) to Some([19.994014397500948, -0.74195 |
| threads/4149-internal-thread-below-counterbore-filleted-rim | tangency-labs/solidcraft#4149 | a modelled M10x1.5 internal thread, full length of the bore below a counterbore, in a cylinder with its rim rounded (stack overflow) | analytic | FAIL: smlib_check SMLib check: 117 failed tests: SmLoop::Test #2 Bad Loop Orient: A UpperLoopuse->Edgeuse's 'Inside' i (want ok) | FAIL: step 4 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([1.9133830447635627, 4.619347644845553, -3.469446951953614e-18]) to Some([-1.913372921 |
| threads/602-fillet-hex-head-beside-modelled-thread | tangency-labs/solidcraft#602 tangency-labs/solidcraft#618 | rounding the top edges of a hex head on a shaft with a modelled thread (it froze the app) | analytic | FAIL: smlib_check SMLib check: 35 failed tests: SmLoop::Test #2 Bad Loop Orient: A UpperLoopuse->Edgeuse's 'Inside' is (want ok) | FAIL: step 9 (solid.thread): SMLib export: pcurve: pcurve of loop 0 use 1 (Some([2.5000000000000018, -3.353876639995629e-15, 0.24997448866668603]) to Some([-0.9560955 |
| threads/995-m5-thread-in-5mm-hole | tangency-labs/solidcraft#995 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853 | a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole | analytic | pass | pass |
Sources
| Source | Cases |
|---|---|
| tangency-labs/solidcraft#1008 | fillets/1008-fillet-tray-floor-and-three-of-four-corners |
| tangency-labs/solidcraft#1018 | threads/1443-m5x0.7-thread-in-5mm-hole, threads/2152-m3x0.2-thread-in-3mm-hole, threads/2369-m8-thread-in-6.3mm-hole-refused, threads/2705-m14-thread-on-14.6mm-shaft-refused, threads/2969-m48x0.75-thread-in-48mm-hole, threads/3366-m20-thread-in-20mm-hole, threads/995-m5-thread-in-5mm-hole |
| tangency-labs/solidcraft#1040 | sheet-metal/1040-convert-a-1200-mm-strip-1-mm-thick, sheet-metal/1040-convert-a-990-mm-strip-keeps-its-1-mm-hole |
| tangency-labs/solidcraft#1067 | fillets/814-chamfer-hex-hole-corners |
| tangency-labs/solidcraft#1080 | fillets/1080-chamfer-beside-openings-fits, fillets/1080-chamfer-runs-into-openings-refused |
| tangency-labs/solidcraft#1084 | sweeps/968-loft-hollow-elbow-60deg-5sections, sweeps/968-loft-hollow-elbow-90deg-10sections |
| tangency-labs/solidcraft#1092 | sheet-metal/1092-convert-a-channel-with-its-bends-modelled, sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius, sheet-metal/1092-convert-an-engraved-plate |
| tangency-labs/solidcraft#1093 | sweeps/1093-circular-pattern-of-a-lofted-join-blade |
| tangency-labs/solidcraft#1095 | sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend |
| tangency-labs/solidcraft#1107 | booleans/1107-join-hollow-hub-with-nine-blades, sweeps/1093-circular-pattern-of-a-lofted-join-blade |
| tangency-labs/solidcraft#1124 | fillets/1080-chamfer-beside-openings-fits, fillets/1080-chamfer-runs-into-openings-refused |
| tangency-labs/solidcraft#114 | booleans/114-extrude-join-on-curved-body-coincident-wall |
| tangency-labs/solidcraft#1140 | booleans/1140-hollow-lofted-tube-cut-in-half-and-joined, sweeps/1140-loft-hollow-tube-bands-halved-and-joined |
| tangency-labs/solidcraft#1184 | sweeps/1184-loft-ring-sections-keep-the-hole |
| tangency-labs/solidcraft#1191 | fillets/1191-fillet-both-rims-of-a-tube-top |
| tangency-labs/solidcraft#1195 | booleans/1195-text-cut-into-plate |
| tangency-labs/solidcraft#12 | shell/12-offset-one-split-face-piece |
| tangency-labs/solidcraft#1207 | fillets/1207-fillet-concave-arc-at-boss, fillets/1207-fillet-straight-edge-ending-on-boss |
| tangency-labs/solidcraft#1213 | fillets/1213-round-end-circle-of-bent-tube |
| tangency-labs/solidcraft#1219 | crashes/1219-bore-fillet-then-grooves-cut |
| tangency-labs/solidcraft#122 | sweeps/96-loft-cut-box-sections-pad-first, sweeps/96-loft-cut-box-sections-top-first |
| tangency-labs/solidcraft#1232 | sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief |
| tangency-labs/solidcraft#1250 | threads/1250-external-m10x1.5-shaft-full-length |
| tangency-labs/solidcraft#1254 | sweeps/1184-loft-ring-sections-keep-the-hole |
| tangency-labs/solidcraft#1262 | fillets/1262-fillet-boss-bottom-arc |
| tangency-labs/solidcraft#1263 | tessellation/1263-concave-arc-knife-edge-plate |
| tangency-labs/solidcraft#1269 | sweeps/1269-sweep-parallel-orientation-oblique-cylinder, sweeps/1269-sweep-twisted-square-ninety-degrees, sweeps/771-sweep-end-scale-cone-frustum |
| tangency-labs/solidcraft#1279 | booleans/1279-cut-with-tool-cylinder-coaxial-with-hole |
| tangency-labs/solidcraft#1280 | sheet-metal/1280-hole-square-to-a-45-degree-flange |
| tangency-labs/solidcraft#1285 | sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge, sheet-metal/725-convert-a-shelled-tray-and-unfold-it |
| tangency-labs/solidcraft#1291 | fillets/1213-round-end-circle-of-bent-tube |
| tangency-labs/solidcraft#1294 | fillets/851-fillet-three-edges-at-knife-edge-arc-corner |
| tangency-labs/solidcraft#1295 | sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece |
| tangency-labs/solidcraft#13 | booleans/13-split-body-by-a-plane |
| tangency-labs/solidcraft#1311 | sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees |
| tangency-labs/solidcraft#1314 | sheet-metal/1092-convert-a-channel-with-its-bends-modelled, sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius, sheet-metal/1092-convert-an-engraved-plate |
| tangency-labs/solidcraft#1338 | sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece |
| tangency-labs/solidcraft#1340 | sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge, sheet-metal/725-convert-a-shelled-tray-and-unfold-it |
| tangency-labs/solidcraft#1355 | booleans/1355-concentric-hole-through-drilled-recess |
| tangency-labs/solidcraft#1390 | fillets/1390-chamfer-hole-rim-touching-bottom |
| tangency-labs/solidcraft#1391 | sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg, sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg |
| tangency-labs/solidcraft#1395 | threads/1395-long-external-m6-thread-24-turns |
| tangency-labs/solidcraft#140 | crashes/140-join-pad-hanging-past-the-edge |
| tangency-labs/solidcraft#1411 | sweeps/1411-coil-intersected-with-a-cylinder-holding-it |
| tangency-labs/solidcraft#1428 | fillets/1390-chamfer-hole-rim-touching-bottom |
| tangency-labs/solidcraft#1443 | threads/1443-m5x0.7-thread-in-5mm-hole |
| tangency-labs/solidcraft#1481 | sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief |
| tangency-labs/solidcraft#1488 | fillets/1488-fillet-slab-end-after-nudged-loft-join |
| tangency-labs/solidcraft#1490 | sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs |
| tangency-labs/solidcraft#1494 | shell/1494-shell-box-with-cylinder-on-edge-line |
| tangency-labs/solidcraft#1517 | fillets/1488-fillet-slab-end-after-nudged-loft-join |
| tangency-labs/solidcraft#1525 | shell/1525-shell-box-with-rounds-chamfer-and-fillet |
| tangency-labs/solidcraft#1556 | sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg, sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg |
| tangency-labs/solidcraft#1557 | fillets/1557-fillet-vertical-corners-after-bottom-rounds |
| tangency-labs/solidcraft#1559 | crashes/3685-delete-fillet-face-beside-seam |
| tangency-labs/solidcraft#1574 | fillets/1390-chamfer-hole-rim-touching-bottom |
| tangency-labs/solidcraft#1581 | fillets/1557-fillet-vertical-corners-after-bottom-rounds |
| tangency-labs/solidcraft#1615 | tessellation/1615-crossed-lofted-tubes |
| tangency-labs/solidcraft#1647 | booleans/1647-box-cylinder-general-intersect |
| tangency-labs/solidcraft#1648 | tessellation/1648-sphere-touches-box-edge-union |
| tangency-labs/solidcraft#1649 | booleans/1649-crossing-cylinders-union-far-from-origin |
| tangency-labs/solidcraft#1653 | tessellation/1615-crossed-lofted-tubes |
| tangency-labs/solidcraft#1666 | sweeps/1666-loft-zigzag-to-flat-rectangle, tessellation/1666-loft-18-gon-ruled-sides, tessellation/1666-loft-twisted-square |
| tangency-labs/solidcraft#1667 | fillets/1667-fillet-rim-line-beside-quarter-turns |
| tangency-labs/solidcraft#1668 | fillets/1668-fillet-both-sides-of-thin-wall |
| tangency-labs/solidcraft#1669 | sweeps/1669-mirrored-window-and-loft-on-a-hollow-case |
| tangency-labs/solidcraft#1670 | tessellation/1666-loft-18-gon-ruled-sides, tessellation/1666-loft-twisted-square |
| tangency-labs/solidcraft#168 | booleans/168-rim-touching-coin-along-a-circle-only, booleans/3841-join-touching-along-one-circle-only |
| tangency-labs/solidcraft#1687 | sweeps/726-revolve-full-turn-planar-faces-whole |
| tangency-labs/solidcraft#1702 | fillets/1667-fillet-rim-line-beside-quarter-turns |
| tangency-labs/solidcraft#1717 | booleans/1717-two-overlapping-sphere-cuts |
| tangency-labs/solidcraft#1718 | sweeps/726-revolve-partial-turn-planar-faces-whole |
| tangency-labs/solidcraft#1720 | fillets/1668-fillet-both-sides-of-thin-wall |
| tangency-labs/solidcraft#1721 | import/1721-closed-bspline-tube-face |
| tangency-labs/solidcraft#1730 | booleans/1730-cut-short-of-far-face-keeps-skin |
| tangency-labs/solidcraft#1736 | booleans/1355-concentric-hole-through-drilled-recess |
| tangency-labs/solidcraft#1753 | tessellation/1753-bowl-rim-cut-by-cylinder |
| tangency-labs/solidcraft#1765 | booleans/1858-shallow-cuts-after-earlier-pocket |
| tangency-labs/solidcraft#1797 | sheet-metal/1797-tray-with-torn-corners-at-72-degrees-folded, sheet-metal/416-round-hole-and-slanted-slot-across-a-bend, sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners |
| tangency-labs/solidcraft#1799 | sheet-metal/1797-tray-with-torn-corners-at-72-degrees-folded, sheet-metal/416-round-hole-and-slanted-slot-across-a-bend, sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners |
| tangency-labs/solidcraft#1806 | sweeps/771-sweep-one-guide-rail-cone-frustum, sweeps/771-sweep-two-guide-rails-cone-frustum |
| tangency-labs/solidcraft#1813 | tessellation/1813-sphere-lens-thinner-than-tolerance |
| tangency-labs/solidcraft#1850 | tessellation/1648-sphere-touches-box-edge-union |
| tangency-labs/solidcraft#1853 | sweeps/1853-revolve-cut-half-a-slot-about-its-centreline |
| tangency-labs/solidcraft#1856 | sweeps/1856-disk-and-36-twisted-lofted-blades-joined |
| tangency-labs/solidcraft#1858 | booleans/1858-shallow-cuts-after-earlier-pocket |
| tangency-labs/solidcraft#1865 | booleans/1865-tube-and-sector-meeting-along-cylinder-walls, booleans/1910-coaxial-cylinders-intersect |
| tangency-labs/solidcraft#1866 | sweeps/1853-revolve-cut-half-a-slot-about-its-centreline, sweeps/1866-revolve-half-slot-profile-180, sweeps/1866-revolve-half-slot-profile-90 |
| tangency-labs/solidcraft#1885 | fillets/324-fillet-over-hole-overlap |
| tangency-labs/solidcraft#190 | fillets/190-fillet-rim-as-tall-as-wall |
| tangency-labs/solidcraft#1910 | booleans/1865-tube-and-sector-meeting-along-cylinder-walls, booleans/1910-coaxial-cylinders-intersect |
| tangency-labs/solidcraft#1927 | booleans/1927-delete-pocket-face-restores-plate |
| tangency-labs/solidcraft#193 | fillets/193-paste-copies-the-fillets |
| tangency-labs/solidcraft#1949 | booleans/1949-extrude-side-drawn-in-collinear-pieces, booleans/1949-tapered-extrude-side-in-collinear-pieces, booleans/2564-joined-side-run-wrapping-past-loop-start |
| tangency-labs/solidcraft#1972 | shell/1972-shell-one-half-sphere-leaves-the-other |
| tangency-labs/solidcraft#1974 | import/2043-outer-bound-opposing-surface-sense |
| tangency-labs/solidcraft#1979 | sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet |
| tangency-labs/solidcraft#1980 | sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet |
| tangency-labs/solidcraft#1983 | booleans/1865-tube-and-sector-meeting-along-cylinder-walls |
| tangency-labs/solidcraft#1984 | booleans/1984-near-coaxial-pin-overlaps-bore-wall, booleans/1984-rivet-with-flush-heads-a-hair-off-its-hole |
| tangency-labs/solidcraft#1985 | crashes/1985-step-export-enclosure-screw-hole, crashes/2243-step-export-flanged-enclosure |
| tangency-labs/solidcraft#1986 | booleans/2008-coaxial-cylinders-join-one-wall, fillets/1986-chamfer-arc-edge-of-joined-sectors |
| tangency-labs/solidcraft#199 | fillets/199-fillet-uses-up-end-face |
| tangency-labs/solidcraft#1995 | threads/1995-m8x1-thread-in-7mm-hole |
| tangency-labs/solidcraft#2003 | booleans/2003-mirror-feature-join-flush-with-mirror-plane |
| tangency-labs/solidcraft#2005 | sweeps/2005-closed-sweep-twisted-cut-inside-a-torus, sweeps/2005-closed-sweep-twisted-new-body |
| tangency-labs/solidcraft#2008 | booleans/2008-coaxial-cylinders-join-one-wall |
| tangency-labs/solidcraft#201 | sweeps/201-loft-one-guide-rail-cone-frustum |
| tangency-labs/solidcraft#2010 | sweeps/2005-closed-sweep-twisted-cut-inside-a-torus, sweeps/2005-closed-sweep-twisted-new-body |
| tangency-labs/solidcraft#2034 | booleans/1865-tube-and-sector-meeting-along-cylinder-walls |
| tangency-labs/solidcraft#2038 | threads/2038-cut-threaded-stud-from-bored-block, threads/2038-internal-then-external-thread-on-one-body, threads/2038-join-two-threaded-bodies |
| tangency-labs/solidcraft#2043 | import/2043-outer-bound-opposing-surface-sense |
| tangency-labs/solidcraft#2055 | booleans/2055-countersink-holes-from-several-sketch-points |
| tangency-labs/solidcraft#2056 | sweeps/2056-rib-grows-along-the-sketch-normal-to-the-part |
| tangency-labs/solidcraft#2057 | sweeps/2056-rib-grows-along-the-sketch-normal-to-the-part |
| tangency-labs/solidcraft#2069 | tessellation/2069-chamfered-ring-notch-moved-far |
| tangency-labs/solidcraft#2076 | booleans/2076-rectangular-pattern-of-cylinder-join |
| tangency-labs/solidcraft#2114 | sweeps/494-extrude-the-flange-face-of-a-fresh-revolve |
| tangency-labs/solidcraft#2115 | threads/2115-tapped-hole-drill-is-major-minus-pitch |
| tangency-labs/solidcraft#214 | fillets/193-paste-copies-the-fillets |
| tangency-labs/solidcraft#2152 | threads/2152-m3x0.2-thread-in-3mm-hole |
| tangency-labs/solidcraft#2158 | booleans/1717-two-overlapping-sphere-cuts |
| tangency-labs/solidcraft#2183 | sweeps/2183-revolve-profile-crosses-the-axis-refused |
| tangency-labs/solidcraft#219 | fillets/219-pattern-of-filleted-pockets |
| tangency-labs/solidcraft#2193 | threads/2193-modelled-m33x3.5-thread |
| tangency-labs/solidcraft#2209 | threads/2209-fine-m44x1-thread-on-shaft, threads/2209-m44x1.5-thread-on-flange-hub |
| tangency-labs/solidcraft#2243 | crashes/1985-step-export-enclosure-screw-hole, crashes/2243-step-export-flanged-enclosure |
| tangency-labs/solidcraft#2263 | threads/2193-modelled-m33x3.5-thread |
| tangency-labs/solidcraft#2295 | sweeps/2295-revolve-cut-torus-by-an-overlapping-ring |
| tangency-labs/solidcraft#2341 | fillets/2341-pattern-of-chamfered-bosses |
| tangency-labs/solidcraft#2342 | fillets/2341-pattern-of-chamfered-bosses |
| tangency-labs/solidcraft#2357 | crashes/2357-join-ring-of-90-cylinder-segments |
| tangency-labs/solidcraft#2367 | threads/2115-tapped-hole-drill-is-major-minus-pitch |
| tangency-labs/solidcraft#2369 | threads/2369-m8-thread-in-6.3mm-hole-refused |
| tangency-labs/solidcraft#237 | fillets/237-fillet-concave-edge-between-two-cylinders |
| tangency-labs/solidcraft#238 | fillets/237-fillet-concave-edge-between-two-cylinders |
| tangency-labs/solidcraft#2406 | threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole |
| tangency-labs/solidcraft#2435 | sweeps/1184-loft-ring-sections-keep-the-hole, sweeps/2435-loft-rectangular-ring-sections |
| tangency-labs/solidcraft#2440 | threads/2115-tapped-hole-drill-is-major-minus-pitch |
| tangency-labs/solidcraft#2441 | threads/2115-tapped-hole-drill-is-major-minus-pitch |
| tangency-labs/solidcraft#2447 | sweeps/1184-loft-ring-sections-keep-the-hole, sweeps/2435-loft-rectangular-ring-sections |
| tangency-labs/solidcraft#2453 | sweeps/2183-revolve-profile-crosses-the-axis-refused |
| tangency-labs/solidcraft#2464 | booleans/2464-extrude-join-leaves-hidden-body-alone |
| tangency-labs/solidcraft#2465 | booleans/2464-extrude-join-leaves-hidden-body-alone |
| tangency-labs/solidcraft#2498 | fillets/2498-fillet-tiny-end-edges-rounded-rectangle |
| tangency-labs/solidcraft#2506 | fillets/2498-fillet-tiny-end-edges-rounded-rectangle |
| tangency-labs/solidcraft#2516 | sweeps/2516-revolve-about-a-named-construction-axis |
| tangency-labs/solidcraft#2524 | booleans/2524-circular-pattern-of-bore-cut |
| tangency-labs/solidcraft#2526 | threads/2526-three-modelled-threads-in-one-body |
| tangency-labs/solidcraft#2528 | tessellation/2528-stadium-joined-with-overlapping-cylinder |
| tangency-labs/solidcraft#2531 | shell/2531-shell-point-pick-after-parameter-edit |
| tangency-labs/solidcraft#2552 | sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore |
| tangency-labs/solidcraft#2564 | booleans/2564-joined-side-run-wrapping-past-loop-start |
| tangency-labs/solidcraft#2570 | sweeps/2570-loft-circle-to-a-non-star-shaped-comb |
| tangency-labs/solidcraft#2579 | booleans/2580-clip-round-small-hole-of-long-plate |
| tangency-labs/solidcraft#258 | import/258-cone-point-vertex, import/258-cone-to-point, import/258-tiny-pin |
| tangency-labs/solidcraft#2580 | booleans/2580-clip-round-small-hole-of-long-plate |
| tangency-labs/solidcraft#2583 | booleans/2583-taper-side-drawn-in-collinear-pieces |
| tangency-labs/solidcraft#2601 | booleans/2601-taper-with-start-offset |
| tangency-labs/solidcraft#2607 | sweeps/2607-revolve-axis-outside-the-sketch-plane-refused |
| tangency-labs/solidcraft#262 | sheet-metal/262-fold-a-tab-just-inside-its-root, sheet-metal/262-fold-at-a-tab-root-refused |
| tangency-labs/solidcraft#264 | sheet-metal/264-fold-one-of-two-collinear-tabs, sheet-metal/264-one-fold-across-two-collinear-tabs |
| tangency-labs/solidcraft#2667 | sweeps/2667-revolve-half-disc-sphere, sweeps/2667-revolve-half-disc-three-quarters, sweeps/2667-sweep-hostile-end-scale-refused |
| tangency-labs/solidcraft#2672 | fillets/2672-chamfer-one-pick-large-plate |
| tangency-labs/solidcraft#2688 | threads/2369-m8-thread-in-6.3mm-hole-refused |
| tangency-labs/solidcraft#2705 | threads/2705-m14-thread-on-14.6mm-shaft-refused |
| tangency-labs/solidcraft#2708 | fillets/2708-fillet-curvature-continuous-angled-ends |
| tangency-labs/solidcraft#271 | sweeps/271-loft-cut-with-targets-keeps-the-bystander |
| tangency-labs/solidcraft#2712 | tessellation/1813-sphere-lens-thinner-than-tolerance |
| tangency-labs/solidcraft#2719 | fillets/2719-chamfer-as-wide-as-corner-round |
| tangency-labs/solidcraft#2739 | fillets/2708-fillet-curvature-continuous-angled-ends |
| tangency-labs/solidcraft#2752 | fillets/2752-fillet-rim-of-flat-cut-on-sphere |
| tangency-labs/solidcraft#2754 | booleans/2754-taper-extrude-line-arc-corner |
| tangency-labs/solidcraft#2755 | booleans/2755-mirror-copy-keeps-seed-targets, booleans/2755-pattern-copies-keep-seed-targets |
| tangency-labs/solidcraft#277 | sheet-metal/262-fold-a-tab-just-inside-its-root, sheet-metal/262-fold-at-a-tab-root-refused |
| tangency-labs/solidcraft#2774 | fillets/2341-pattern-of-chamfered-bosses |
| tangency-labs/solidcraft#2775 | fillets/2341-pattern-of-chamfered-bosses |
| tangency-labs/solidcraft#2787 | fillets/2752-fillet-rim-of-flat-cut-on-sphere |
| tangency-labs/solidcraft#279 | sheet-metal/264-fold-one-of-two-collinear-tabs |
| tangency-labs/solidcraft#2797 | fillets/2797-chamfer-two-distances-circular-rim |
| tangency-labs/solidcraft#2801 | booleans/2801-prism-edge-in-round-cornered-slab-end-face |
| tangency-labs/solidcraft#2810 | booleans/2810-taper-extrude-arcs-meeting-at-corners |
| tangency-labs/solidcraft#2811 | fillets/2811-fillet-rib-roots |
| tangency-labs/solidcraft#2813 | booleans/2810-taper-extrude-arcs-meeting-at-corners |
| tangency-labs/solidcraft#2820 | sweeps/2820-pipe-cut-oblique-hole-through-a-block, sweeps/2820-pipe-hollow-with-a-wall-along-a-bend |
| tangency-labs/solidcraft#2822 | threads/2822-modelled-thread-in-filleted-cube |
| tangency-labs/solidcraft#2826 | booleans/2826-cut-up-to-face-leaves-no-skin |
| tangency-labs/solidcraft#2827 | booleans/2826-cut-up-to-face-leaves-no-skin |
| tangency-labs/solidcraft#2844 | booleans/3092-ring-on-perforated-plate, booleans/3887-ring-standing-on-perforated-plate |
| tangency-labs/solidcraft#2847 | sweeps/2847-loft-rectangles-turning-through-half-a-turn |
| tangency-labs/solidcraft#2852 | fillets/2852-fillet-outer-round-concentric-with-inner |
| tangency-labs/solidcraft#2853 | threads/1443-m5x0.7-thread-in-5mm-hole, threads/2152-m3x0.2-thread-in-3mm-hole, threads/2369-m8-thread-in-6.3mm-hole-refused, threads/2705-m14-thread-on-14.6mm-shaft-refused, threads/2969-m48x0.75-thread-in-48mm-hole, threads/3366-m20-thread-in-20mm-hole, threads/995-m5-thread-in-5mm-hole |
| tangency-labs/solidcraft#286 | sweeps/271-loft-cut-with-targets-keeps-the-bystander |
| tangency-labs/solidcraft#2862 | sweeps/2862-three-pipes-meeting-at-one-point |
| tangency-labs/solidcraft#2891 | sweeps/2891-twisted-sweep-cut-through-a-tube |
| tangency-labs/solidcraft#2893 | fillets/2797-chamfer-two-distances-circular-rim |
| tangency-labs/solidcraft#2896 | booleans/2896-join-arm-end-into-ring-wall, booleans/2896-join-arm-end-near-ring-wall-gap |
| tangency-labs/solidcraft#2904 | booleans/2904-countersunk-hole-with-distant-body |
| tangency-labs/solidcraft#2907 | fillets/2907-chamfer-two-end-outlines-rounded-top |
| tangency-labs/solidcraft#2928 | booleans/2928-join-cap-touching-lips-with-offset-walls |
| tangency-labs/solidcraft#2939 | shell/2939-offset-face-sphere |
| tangency-labs/solidcraft#2947 | sweeps/2947-revolve-300-degrees-intersected-by-a-plate |
| tangency-labs/solidcraft#2948 | sweeps/2947-revolve-300-degrees-intersected-by-a-plate |
| tangency-labs/solidcraft#296 | sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges |
| tangency-labs/solidcraft#2963 | booleans/3327-cut-ending-flush-with-side-wall |
| tangency-labs/solidcraft#2969 | threads/2969-m48x0.75-thread-in-48mm-hole |
| tangency-labs/solidcraft#2979 | booleans/3447-split-along-plane-of-a-face |
| tangency-labs/solidcraft#299 | sweeps/271-loft-cut-with-targets-keeps-the-bystander |
| tangency-labs/solidcraft#2990 | shell/3669-shell-lofted-square-frustum |
| tangency-labs/solidcraft#2992 | crashes/2992-join-disk-and-36-twisted-loft-blades, sweeps/1856-disk-and-36-twisted-lofted-blades-joined |
| tangency-labs/solidcraft#3006 | sweeps/3006-second-sweep-from-a-plane-along-a-closed-path |
| tangency-labs/solidcraft#3027 | booleans/3027-pin-seated-line-to-line-in-bore |
| tangency-labs/solidcraft#3060 | threads/1443-m5x0.7-thread-in-5mm-hole |
| tangency-labs/solidcraft#3062 | booleans/3485-boss-joined-on-rod-top-keeps-side-whole |
| tangency-labs/solidcraft#307 | booleans/307-tangent-hole-contacts-ring-against-grid |
| tangency-labs/solidcraft#3078 | sheet-metal/3078-flange-on-the-side-edge-of-a-flange |
| tangency-labs/solidcraft#308 | booleans/308-blind-cut-ending-inside-a-cylinder |
| tangency-labs/solidcraft#3088 | sweeps/3088-coil-thread-joined-flush-with-a-cylinder |
| tangency-labs/solidcraft#3092 | booleans/3092-ring-on-perforated-plate |
| tangency-labs/solidcraft#3098 | import/3098-bspline-edges-over-tiny-knot-span |
| tangency-labs/solidcraft#3103 | shell/3103-shell-tapered-cylinder |
| tangency-labs/solidcraft#311 | tessellation/311-ramp-cut-cylinder-blank |
| tangency-labs/solidcraft#3111 | sweeps/3111-loft-rectangular-ring-to-circular-ring |
| tangency-labs/solidcraft#3120 | import/3208-extruded-ellipse-face-over-parameter-seam |
| tangency-labs/solidcraft#3156 | sweeps/3156-revolve-join-end-faces-flush-with-a-face |
| tangency-labs/solidcraft#317 | fillets/199-fillet-uses-up-end-face |
| tangency-labs/solidcraft#3175 | booleans/3175-cut-beside-sealed-void |
| tangency-labs/solidcraft#318 | fillets/190-fillet-rim-as-tall-as-wall |
| tangency-labs/solidcraft#3191 | sweeps/3191-revolve-cut-leaves-a-cone |
| tangency-labs/solidcraft#3208 | import/3208-extruded-ellipse-face-over-parameter-seam |
| tangency-labs/solidcraft#3224 | sweeps/3156-revolve-join-end-faces-flush-with-a-face |
| tangency-labs/solidcraft#3234 | sheet-metal/3234-edge-flange-on-the-bend-line-refused |
| tangency-labs/solidcraft#324 | fillets/324-fillet-over-hole-overlap |
| tangency-labs/solidcraft#3243 | booleans/3243-rim-and-rounded-tooth-join |
| tangency-labs/solidcraft#3273 | sheet-metal/3234-edge-flange-on-the-bend-line-refused |
| tangency-labs/solidcraft#3274 | sheet-metal/3078-flange-on-the-side-edge-of-a-flange |
| tangency-labs/solidcraft#3276 | fillets/3276-chamfer-edge-of-1mm-protrusion-on-joined-l |
| tangency-labs/solidcraft#3280 | sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs |
| tangency-labs/solidcraft#3283 | shell/3283-offset-face-cylinder-wall |
| tangency-labs/solidcraft#3295 | fillets/2672-chamfer-one-pick-large-plate |
| tangency-labs/solidcraft#3300 | fillets/2797-chamfer-two-distances-circular-rim |
| tangency-labs/solidcraft#3303 | booleans/3303-inward-cut-of-frustum-top-face |
| tangency-labs/solidcraft#3309 | booleans/3303-inward-cut-of-frustum-top-face |
| tangency-labs/solidcraft#3311 | threads/2115-tapped-hole-drill-is-major-minus-pitch, threads/3311-two-tapped-holes-both-modelled-threaded |
| tangency-labs/solidcraft#3316 | sheet-metal/3316-convert-a-plate-keeps-its-place |
| tangency-labs/solidcraft#3324 | sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet |
| tangency-labs/solidcraft#3325 | sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet |
| tangency-labs/solidcraft#3326 | sweeps/3326-loft-20mm-square-to-a-circle |
| tangency-labs/solidcraft#3327 | booleans/3327-cut-ending-flush-with-side-wall |
| tangency-labs/solidcraft#334 | fillets/334-fillet-top-outline-after-concave-rounds |
| tangency-labs/solidcraft#3345 | sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle |
| tangency-labs/solidcraft#335 | fillets/334-fillet-top-outline-after-concave-rounds |
| tangency-labs/solidcraft#3351 | import/3352-vertex-off-its-edge-curve |
| tangency-labs/solidcraft#3352 | import/3352-vertex-off-its-edge-curve |
| tangency-labs/solidcraft#3353 | sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern |
| tangency-labs/solidcraft#3354 | sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern |
| tangency-labs/solidcraft#3358 | import/3359-iges-trim-pieces-written-end-to-start |
| tangency-labs/solidcraft#3359 | import/3359-iges-trim-pieces-written-end-to-start |
| tangency-labs/solidcraft#3366 | threads/3366-m20-thread-in-20mm-hole |
| tangency-labs/solidcraft#3367 | threads/3366-m20-thread-in-20mm-hole |
| tangency-labs/solidcraft#3368 | threads/3368-faceted-prism-pocket-cut-and-boss-join, threads/3368-faceted-prism-with-bore-and-cross-hole, threads/3368-two-faceted-prisms-cut-then-joined |
| tangency-labs/solidcraft#3369 | fillets/3369-fillet-edge-ends-on-tangent-seam |
| tangency-labs/solidcraft#3371 | sweeps/201-loft-one-guide-rail-cone-frustum |
| tangency-labs/solidcraft#3378 | booleans/3378-circular-pattern-of-join-that-merged-targets |
| tangency-labs/solidcraft#3379 | booleans/3379-circular-pattern-of-thin-spoke-on-ring, booleans/3612-circular-pattern-of-spoke-tangent-to-hub |
| tangency-labs/solidcraft#3383 | booleans/3383-combine-tool-into-rotated-occurrence |
| tangency-labs/solidcraft#3402 | sweeps/3326-loft-20mm-square-to-a-circle |
| tangency-labs/solidcraft#3412 | sweeps/3412-loft-sections-in-one-plane-refused |
| tangency-labs/solidcraft#3417 | sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs |
| tangency-labs/solidcraft#3418 | sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet |
| tangency-labs/solidcraft#3421 | sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs |
| tangency-labs/solidcraft#3425 | booleans/3782-emboss-on-cylinder-pick-on-far-half |
| tangency-labs/solidcraft#3435 | fillets/3435-fillet-larger-than-top-ring |
| tangency-labs/solidcraft#3441 | fillets/3435-fillet-larger-than-top-ring |
| tangency-labs/solidcraft#3447 | booleans/3447-split-along-plane-of-a-face |
| tangency-labs/solidcraft#3452 | sweeps/2847-loft-rectangles-turning-through-half-a-turn |
| tangency-labs/solidcraft#3455 | booleans/3455-join-of-64-separate-pegs |
| tangency-labs/solidcraft#3456 | booleans/3456-deep-cut-through-drilled-taper-leaves-base, booleans/3497-collinear-cylinders-partial-height-intersection, booleans/3497-pin-overlapping-bore-by-20-microns |
| tangency-labs/solidcraft#3460 | booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs |
| tangency-labs/solidcraft#3468 | shell/3468-offset-face-boss-wall-next-to-fillet |
| tangency-labs/solidcraft#3485 | booleans/3485-boss-joined-on-rod-top-keeps-side-whole |
| tangency-labs/solidcraft#349 | sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-72-degrees, sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees |
| tangency-labs/solidcraft#3497 | booleans/3456-deep-cut-through-drilled-taper-leaves-base, booleans/3497-collinear-cylinders-partial-height-intersection, booleans/3497-pin-overlapping-bore-by-20-microns |
| tangency-labs/solidcraft#3505 | sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner |
| tangency-labs/solidcraft#3506 | shell/3506-split-body-then-shell-both-halves |
| tangency-labs/solidcraft#3526 | booleans/3526-intersect-keeps-every-lump |
| tangency-labs/solidcraft#3528 | sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam |
| tangency-labs/solidcraft#3540 | crashes/3540-cut-with-coincident-cylinder-face |
| tangency-labs/solidcraft#3541 | sweeps/3541-loft-two-circles-into-a-cone-flipped-plane, sweeps/3541-loft-two-circles-into-a-cone-same-sense |
| tangency-labs/solidcraft#355 | sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges |
| tangency-labs/solidcraft#3573 | shell/3576-shell-tapered-box-rounded-corners |
| tangency-labs/solidcraft#3576 | shell/3576-shell-tapered-box-rounded-corners |
| tangency-labs/solidcraft#3604 | booleans/3604-cut-with-g2-swept-tool-along-projected-edge |
| tangency-labs/solidcraft#3612 | booleans/3612-circular-pattern-of-spoke-tangent-to-hub |
| tangency-labs/solidcraft#3613 | booleans/3604-cut-with-g2-swept-tool-along-projected-edge |
| tangency-labs/solidcraft#3619 | sweeps/2516-revolve-about-a-named-construction-axis |
| tangency-labs/solidcraft#363 | fillets/193-paste-copies-the-fillets |
| tangency-labs/solidcraft#3633 | booleans/3633-sphere-intersect-pyramid-apex-at-centre |
| tangency-labs/solidcraft#3650 | shell/3283-offset-face-cylinder-wall |
| tangency-labs/solidcraft#3652 | booleans/3652-mirror-of-a-mirror-feature |
| tangency-labs/solidcraft#3655 | fillets/3655-chamfer-edge-order-box |
| tangency-labs/solidcraft#3660 | fillets/3655-chamfer-edge-order-box |
| tangency-labs/solidcraft#3665 | booleans/3665-join-extrude-column-on-floor-and-curved-walls |
| tangency-labs/solidcraft#3666 | booleans/3665-join-extrude-column-on-floor-and-curved-walls |
| tangency-labs/solidcraft#3669 | shell/3669-shell-lofted-square-frustum |
| tangency-labs/solidcraft#3670 | sweeps/2570-loft-circle-to-a-non-star-shaped-comb |
| tangency-labs/solidcraft#3671 | booleans/3671-intersect-tool-in-top-face-beside-rib |
| tangency-labs/solidcraft#3682 | booleans/3633-sphere-intersect-pyramid-apex-at-centre |
| tangency-labs/solidcraft#3685 | crashes/3685-delete-fillet-face-beside-seam |
| tangency-labs/solidcraft#3695 | sweeps/2891-twisted-sweep-cut-through-a-tube |
| tangency-labs/solidcraft#3702 | booleans/3702-board-in-cavity-of-filleted-rim-case |
| tangency-labs/solidcraft#3703 | booleans/3703-two-face-extrudes-join-keep-the-step |
| tangency-labs/solidcraft#3729 | booleans/3729-extrude-to-point-on-step-edge |
| tangency-labs/solidcraft#3730 | import/3730-void-oriented-shell-false |
| tangency-labs/solidcraft#3736 | sweeps/2607-revolve-axis-outside-the-sketch-plane-refused |
| tangency-labs/solidcraft#3741 | booleans/3850-cross-cut-touching-round-side, booleans/3850-hole-through-wall-after-cross-cut |
| tangency-labs/solidcraft#3753 | fillets/3753-circular-pattern-of-hole-and-its-rim-chamfer |
| tangency-labs/solidcraft#3758 | sweeps/3088-coil-thread-joined-flush-with-a-cylinder |
| tangency-labs/solidcraft#3779 | fillets/3779-chamfer-all-spline-spans, fillets/3779-fillet-all-spline-spans |
| tangency-labs/solidcraft#3782 | booleans/3782-emboss-on-cylinder-pick-on-far-half |
| tangency-labs/solidcraft#3796 | sweeps/2516-revolve-about-a-named-construction-axis |
| tangency-labs/solidcraft#3804 | fillets/3779-chamfer-all-spline-spans, fillets/3779-fillet-all-spline-spans |
| tangency-labs/solidcraft#3806 | import/3806-iges-revolved-arc-spherical-cap-dome |
| tangency-labs/solidcraft#3813 | import/3806-iges-revolved-arc-spherical-cap-dome |
| tangency-labs/solidcraft#3816 | booleans/3816-circular-pattern-of-body-about-offset-axis |
| tangency-labs/solidcraft#3830 | booleans/3830-split-cup-by-extended-spline-surface |
| tangency-labs/solidcraft#3832 | sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder |
| tangency-labs/solidcraft#3841 | booleans/3841-join-touching-along-one-circle-only |
| tangency-labs/solidcraft#3845 | import/3845-iges-trim-pieces-miss-by-a-gap |
| tangency-labs/solidcraft#3846 | import/3845-iges-trim-pieces-miss-by-a-gap |
| tangency-labs/solidcraft#3850 | booleans/3850-cross-cut-touching-round-side, booleans/3850-hole-through-wall-after-cross-cut |
| tangency-labs/solidcraft#3861 | fillets/2907-chamfer-two-end-outlines-rounded-top |
| tangency-labs/solidcraft#3862 | sweeps/3862-coil-square-wire-outside-the-diameter |
| tangency-labs/solidcraft#3868 | fillets/3868-chamfer-concave-edge-adds-material |
| tangency-labs/solidcraft#3871 | import/3871-cone-base-circle-with-vertex-loop, import/3871-cone-bounded-only-by-its-base-circle |
| tangency-labs/solidcraft#3872 | import/3730-void-oriented-shell-false |
| tangency-labs/solidcraft#3880 | import/1721-closed-bspline-tube-face, import/3871-cone-bounded-only-by-its-base-circle, import/3880-cylinder-seam-edge, import/3880-nurbs-hemisphere-dome |
| tangency-labs/solidcraft#3885 | import/3886-iges-bspline-curve-over-tiny-knot-span |
| tangency-labs/solidcraft#3886 | import/3886-iges-bspline-curve-over-tiny-knot-span |
| tangency-labs/solidcraft#3887 | booleans/3887-ring-standing-on-perforated-plate |
| tangency-labs/solidcraft#3888 | booleans/3526-intersect-keeps-every-lump |
| tangency-labs/solidcraft#3893 | shell/745-offset-face-on-body-with-distant-freeform-boss, shell/745-offset-face-then-cut-boss-away |
| tangency-labs/solidcraft#3897 | sweeps/3897-sweep-ring-along-a-short-arc-joined-to-a-collar |
| tangency-labs/solidcraft#3898 | shell/3468-offset-face-boss-wall-next-to-fillet |
| tangency-labs/solidcraft#3901 | import/3871-cone-base-circle-with-vertex-loop, import/3871-cone-bounded-only-by-its-base-circle |
| tangency-labs/solidcraft#391 | shell/391-deboss-text-on-flange-of-filleted-shelled-body |
| tangency-labs/solidcraft#3911 | sweeps/3191-revolve-cut-leaves-a-cone |
| tangency-labs/solidcraft#3912 | import/3912-iges-hole-trim-first-piece-reversed, import/3913-iges-trim-curve-first-piece-reversed |
| tangency-labs/solidcraft#3913 | import/3913-iges-trim-curve-first-piece-reversed |
| tangency-labs/solidcraft#3914 | threads/3914-sketch-on-top-face-of-threaded-rounded-block |
| tangency-labs/solidcraft#3915 | sweeps/3862-coil-square-wire-outside-the-diameter |
| tangency-labs/solidcraft#3922 | fillets/3369-fillet-edge-ends-on-tangent-seam |
| tangency-labs/solidcraft#3928 | import/3972-iges-two-separate-closed-boxes |
| tangency-labs/solidcraft#3936 | sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder |
| tangency-labs/solidcraft#3952 | threads/3952-modelled-thread-in-blind-hole-of-revolved-ring |
| tangency-labs/solidcraft#396 | sweeps/396-loft-join-standing-on-a-box-face |
| tangency-labs/solidcraft#3963 | import/3963-closed-spline-edge-vertex-past-start |
| tangency-labs/solidcraft#3968 | booleans/3968-hole-as-wide-as-a-cones-top |
| tangency-labs/solidcraft#3972 | import/3972-iges-two-separate-closed-boxes |
| tangency-labs/solidcraft#4005 | import/4005-cylinder-written-as-near-zero-cone |
| tangency-labs/solidcraft#4006 | import/4006-plane-written-as-cone-of-nearly-right-angle |
| tangency-labs/solidcraft#4007 | sweeps/4007-revolve-half-disc-horn-torus-270-degrees |
| tangency-labs/solidcraft#4008 | booleans/4008-symmetric-revolve-cut-ends-in-side-face, sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face |
| tangency-labs/solidcraft#4009 | shell/4009-closed-shell-internal-void |
| tangency-labs/solidcraft#4010 | shell/4010-shell-open-at-through-hole-wall |
| tangency-labs/solidcraft#4011 | booleans/4011-mirror-of-cut-under-wall |
| tangency-labs/solidcraft#405 | sheet-metal/405-tray-with-72-degree-flanges-folded, sheet-metal/405-unfold-a-tray-with-72-degree-flanges |
| tangency-labs/solidcraft#4055 | fillets/4055-chamfer-bar-edge-over-joined-pin |
| tangency-labs/solidcraft#4056 | sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern, sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow |
| tangency-labs/solidcraft#4058 | booleans/4058-walls-joined-flush-round-a-floor |
| tangency-labs/solidcraft#4059 | booleans/4058-walls-joined-flush-round-a-floor |
| tangency-labs/solidcraft#406 | sheet-metal/405-tray-with-72-degree-flanges-folded, sheet-metal/405-unfold-a-tray-with-72-degree-flanges |
| tangency-labs/solidcraft#4080 | sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern, sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow |
| tangency-labs/solidcraft#4092 | crashes/4092-loft-ribs-rounded-pad-union-panics, crashes/4092-loft-ribs-rounded-pad-union-reduced |
| tangency-labs/solidcraft#4095 | booleans/4095-slab-cut-standing-off-a-bore-r10, booleans/4095-slab-cut-standing-off-a-bore-r15 |
| tangency-labs/solidcraft#4101 | fillets/4101-chamfer-tapered-plug-corners |
| tangency-labs/solidcraft#4141 | fillets/4141-fillet-corner-after-wedge-cut-beside-bspline |
| tangency-labs/solidcraft#4143 | fillets/4143-fillet-notch-rim-on-bspline-ramp |
| tangency-labs/solidcraft#4149 | threads/4149-internal-thread-below-counterbore-filleted-rim |
| tangency-labs/solidcraft#4153 | threads/2193-modelled-m33x3.5-thread |
| tangency-labs/solidcraft#416 | sheet-metal/416-round-hole-and-slanted-slot-across-a-bend |
| tangency-labs/solidcraft#423 | booleans/423-through-all-cut-must-not-reach-behind-sketch-plane |
| tangency-labs/solidcraft#425 | sheet-metal/416-round-hole-and-slanted-slot-across-a-bend |
| tangency-labs/solidcraft#430 | sheet-metal/529-a-hundred-slots-and-four-folds |
| tangency-labs/solidcraft#436 | sheet-metal/436-edge-flanges-at-105-and-120-degrees-on-opposite-edges, sheet-metal/436-edge-flanges-with-their-own-height-on-opposite-edges, sheet-metal/436-unfold-a-tray-with-four-angles-and-heights |
| tangency-labs/solidcraft#443 | sweeps/443-loft-intersect-cone-meets-wall-below-top |
| tangency-labs/solidcraft#447 | sheet-metal/436-edge-flanges-at-105-and-120-degrees-on-opposite-edges, sheet-metal/436-edge-flanges-with-their-own-height-on-opposite-edges, sheet-metal/436-unfold-a-tray-with-four-angles-and-heights |
| tangency-labs/solidcraft#450 | sweeps/450-revolve-spherical-shell-sketched-off-the-origin |
| tangency-labs/solidcraft#451 | booleans/451-cut-block-crossing-hollow-sphere-tool, booleans/451-cut-block-inside-hollow-sphere-tool |
| tangency-labs/solidcraft#452 | sweeps/450-revolve-spherical-shell-sketched-off-the-origin |
| tangency-labs/solidcraft#466 | tessellation/466-revolved-cone-tip-stays-smooth |
| tangency-labs/solidcraft#479 | sheet-metal/479-unfold-a-tray-with-round-relieved-corners |
| tangency-labs/solidcraft#485 | fillets/485-fillet-d-prism-top-outline-arc-and-flat |
| tangency-labs/solidcraft#487 | sweeps/487-cut-disc-by-revolved-adjacent-profiles, sweeps/487-revolve-two-adjacent-profiles-on-the-axis |
| tangency-labs/solidcraft#488 | sheet-metal/488-unfold-a-tray-with-square-relieved-corners |
| tangency-labs/solidcraft#490 | sweeps/487-cut-disc-by-revolved-adjacent-profiles, sweeps/487-revolve-two-adjacent-profiles-on-the-axis |
| tangency-labs/solidcraft#494 | sweeps/494-extrude-the-flange-face-of-a-fresh-revolve |
| tangency-labs/solidcraft#500 | booleans/500-coaxial-cylinder-cut-from-thin-disc |
| tangency-labs/solidcraft#501 | sheet-metal/436-unfold-a-tray-with-four-angles-and-heights |
| tangency-labs/solidcraft#514 | sheet-metal/514-refold-an-L-bracket-after-unfolding-it, sheet-metal/514-unfold-an-L-bracket |
| tangency-labs/solidcraft#529 | sheet-metal/529-a-hundred-slots-and-four-folds |
| tangency-labs/solidcraft#541 | sheet-metal/541-box-cut-straight-through-a-flat-sheet |
| tangency-labs/solidcraft#542 | sheet-metal/542-round-hole-in-a-flat-sheet-and-its-flat-pattern |
| tangency-labs/solidcraft#552 | sheet-metal/542-round-hole-in-a-flat-sheet-and-its-flat-pattern |
| tangency-labs/solidcraft#556 | fillets/556-fillet-edge-ending-on-curved-boss |
| tangency-labs/solidcraft#559 | booleans/559-through-hole-into-shelled-box-rim |
| tangency-labs/solidcraft#560 | sheet-metal/560-hole-through-a-sheet-metal-base |
| tangency-labs/solidcraft#561 | sweeps/561-extrude-the-end-face-of-a-loft, sweeps/561-extrude-the-end-face-of-a-sweep, sweeps/561-extrude-the-start-face-of-a-coil |
| tangency-labs/solidcraft#562 | booleans/562-press-pull-floor-beside-rounds |
| tangency-labs/solidcraft#566 | shell/566-shell-swept-bar-with-bend |
| tangency-labs/solidcraft#570 | sheet-metal/570-flange-refuses-thickness-it-would-ignore |
| tangency-labs/solidcraft#572 | sheet-metal/570-flange-refuses-thickness-it-would-ignore |
| tangency-labs/solidcraft#577 | sweeps/396-loft-join-standing-on-a-box-face |
| tangency-labs/solidcraft#593 | sheet-metal/601-return-lip-on-a-flanges-far-edge |
| tangency-labs/solidcraft#594 | sheet-metal/570-flange-refuses-thickness-it-would-ignore |
| tangency-labs/solidcraft#601 | sheet-metal/601-return-lip-on-a-flanges-far-edge |
| tangency-labs/solidcraft#602 | threads/602-fillet-hex-head-beside-modelled-thread |
| tangency-labs/solidcraft#604 | fillets/485-fillet-d-prism-top-outline-arc-and-flat |
| tangency-labs/solidcraft#613 | fillets/193-paste-copies-the-fillets |
| tangency-labs/solidcraft#618 | threads/602-fillet-hex-head-beside-modelled-thread |
| tangency-labs/solidcraft#634 | sheet-metal/634-flange-beside-the-leg-of-an-L-folded, sheet-metal/634-unfold-a-flange-beside-the-leg-of-an-L |
| tangency-labs/solidcraft#638 | sheet-metal/638-fold-both-collinear-tabs-one-after-the-other |
| tangency-labs/solidcraft#639 | sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank |
| tangency-labs/solidcraft#646 | fillets/556-fillet-edge-ending-on-curved-boss |
| tangency-labs/solidcraft#647 | sheet-metal/725-convert-a-shelled-tray-and-unfold-it |
| tangency-labs/solidcraft#652 | sheet-metal/638-fold-both-collinear-tabs-one-after-the-other |
| tangency-labs/solidcraft#653 | sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank |
| tangency-labs/solidcraft#656 | sheet-metal/560-hole-through-a-sheet-metal-base |
| tangency-labs/solidcraft#659 | sheet-metal/659-ellipse-cutout-across-a-bend, sheet-metal/659-ellipse-cutout-in-a-flat-sheet |
| tangency-labs/solidcraft#677 | sweeps/561-extrude-the-end-face-of-a-loft, sweeps/561-extrude-the-end-face-of-a-sweep, sweeps/561-extrude-the-start-face-of-a-coil |
| tangency-labs/solidcraft#692 | sheet-metal/659-ellipse-cutout-across-a-bend, sheet-metal/659-ellipse-cutout-in-a-flat-sheet |
| tangency-labs/solidcraft#702 | sheet-metal/702-flange-along-what-a-cutout-leaves |
| tangency-labs/solidcraft#723 | sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners |
| tangency-labs/solidcraft#725 | sheet-metal/725-convert-a-shelled-tray-and-unfold-it |
| tangency-labs/solidcraft#726 | sweeps/494-extrude-the-flange-face-of-a-fresh-revolve, sweeps/726-revolve-full-turn-planar-faces-whole, sweeps/726-revolve-partial-turn-planar-faces-whole |
| tangency-labs/solidcraft#745 | shell/745-offset-face-on-body-with-distant-freeform-boss, shell/745-offset-face-then-cut-boss-away |
| tangency-labs/solidcraft#757 | sweeps/757-surface-loft-ruled-strip-between-two-lines, sweeps/757-surface-revolve-line-cone-frustum-sheet, sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc |
| tangency-labs/solidcraft#771 | sweeps/771-sweep-end-scale-cone-frustum, sweeps/771-sweep-one-guide-rail-cone-frustum, sweeps/771-sweep-two-guide-rails-cone-frustum |
| tangency-labs/solidcraft#774 | sheet-metal/774-convert-a-plate-with-nine-round-holes |
| tangency-labs/solidcraft#783 | fillets/783-fillet-pick-far-from-any-edge-refused |
| tangency-labs/solidcraft#784 | tessellation/784-stl-open-edges-filleted-and-drilled |
| tangency-labs/solidcraft#793 | sweeps/793-coil-cut-by-a-box-above-a-plane, sweeps/793-coil-split-by-a-plane-across-its-axis |
| tangency-labs/solidcraft#809 | sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners |
| tangency-labs/solidcraft#811 | tessellation/784-stl-open-edges-filleted-and-drilled |
| tangency-labs/solidcraft#814 | fillets/814-chamfer-hex-hole-corners |
| tangency-labs/solidcraft#818 | tessellation/818-blind-hole-splits-vertical-edges |
| tangency-labs/solidcraft#819 | tessellation/819-cup-pocket-splits-wall-seam |
| tangency-labs/solidcraft#820 | fillets/783-fillet-pick-far-from-any-edge-refused |
| tangency-labs/solidcraft#824 | sweeps/757-surface-revolve-line-cone-frustum-sheet |
| tangency-labs/solidcraft#831 | booleans/831-tapered-extrude-d-shape-arc-meets-line, booleans/831-tapered-extrude-text-glyph |
| tangency-labs/solidcraft#839 | sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded |
| tangency-labs/solidcraft#843 | sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc |
| tangency-labs/solidcraft#844 | sweeps/844-join-two-overlapping-swept-arc-walls |
| tangency-labs/solidcraft#847 | sweeps/757-surface-loft-ruled-strip-between-two-lines |
| tangency-labs/solidcraft#851 | fillets/851-fillet-three-edges-at-knife-edge-arc-corner |
| tangency-labs/solidcraft#854 | fillets/851-fillet-three-edges-at-knife-edge-arc-corner |
| tangency-labs/solidcraft#862 | fillets/862-fillet-curvature-continuous-box-edge |
| tangency-labs/solidcraft#881 | sweeps/881-loft-zigzag-pleat-vertex-pairing |
| tangency-labs/solidcraft#896 | fillets/896-fillet-smooth-seam-refused |
| tangency-labs/solidcraft#921 | tessellation/819-cup-pocket-splits-wall-seam |
| tangency-labs/solidcraft#926 | fillets/851-fillet-three-edges-at-knife-edge-arc-corner |
| tangency-labs/solidcraft#935 | fillets/851-fillet-three-edges-at-knife-edge-arc-corner |
| tangency-labs/solidcraft#936 | fillets/896-fillet-smooth-seam-refused |
| tangency-labs/solidcraft#955 | sheet-metal/955-hole-drilled-into-a-sheet-metal-rim |
| tangency-labs/solidcraft#956 | sweeps/881-loft-zigzag-pleat-vertex-pairing |
| tangency-labs/solidcraft#958 | sheet-metal/685-fold-with-the-fixed-point-on-the-top-face |
| tangency-labs/solidcraft#96 | sweeps/96-loft-cut-box-sections-pad-first, sweeps/96-loft-cut-box-sections-top-first, sweeps/96-shallow-loft-cut-starting-in-the-top-face, sweeps/96-sweep-rectangle-round-a-mitred-corner |
| tangency-labs/solidcraft#963 | sheet-metal/638-fold-both-collinear-tabs-one-after-the-other, sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank |
| tangency-labs/solidcraft#964 | sheet-metal/529-a-hundred-slots-and-four-folds |
| tangency-labs/solidcraft#968 | sweeps/968-loft-hollow-elbow-60deg-5sections, sweeps/968-loft-hollow-elbow-90deg-10sections |
| tangency-labs/solidcraft#977 | sheet-metal/774-convert-a-plate-with-nine-round-holes |
| tangency-labs/solidcraft#978 | sheet-metal/978-edge-flange-beside-a-ledge-as-tall-as-its-setback |
| tangency-labs/solidcraft#995 | threads/995-m5-thread-in-5mm-hole |
Coverage by source
| Source | Looked at | Became cases | Skipped |
|---|---|---|---|
| PR, not merged | 99 | 22 | 77 |
| issue or PR, newer than this list | 5 | 1 | 4 |
| issue, closed | 234 | 102 | 132 |
| issue, open | 827 | 171 | 656 |
| kernel-paused PR | 55 | 18 | 37 |
| merged PR | 314 | 132 | 182 |
| truck-geometry PR | 39 | 27 | 12 |
| all | 1573 | 473 | 1100 |
Looked at and skipped
booleans
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#24 | not geometry: a diagnostics/warning feature (report which boolean fallback ran and by how much), no wrong result |
| tangency-labs/solidcraft#25 | test infrastructure (spatial reference comparison), no geometry failure |
| tangency-labs/solidcraft#141 | needs the basin design (a floor of four 0.5 degree facets around a drain with a boss ring, from #119/#126); not attached, no recipe in the issue |
| tangency-labs/solidcraft#195 | sketch.create refusal on a user's face; needs the user's design, no geometry spec |
| tangency-labs/solidcraft#206 | no design attached (a 146-curved-face target); only the join's params and the failure text |
| tangency-labs/solidcraft#255 | performance only, no wrong result |
| tangency-labs/solidcraft#287 | performance only, no wrong result |
| tangency-labs/solidcraft#291 | feature request (integer arithmetic), no geometry case |
| tangency-labs/solidcraft#331 | kernel evaluation or tracking, not a geometry failure |
| tangency-labs/solidcraft#344 | sketch.create refusal on a user's face; needs the user's design, no geometry spec |
| tangency-labs/solidcraft#367 | needs the example plastic enclosure (not attached); only the drilled-hole params and the failure text |
| tangency-labs/solidcraft#415 | sketch.create refusal on two intersecting cylinders plus a feature request; no dimensions to rebuild |
| tangency-labs/solidcraft#424 | other area: threads |
| tangency-labs/solidcraft#446 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#456 | no design attached (cut with a freeform tool from a sketch 'to' a point); only the params and failure text |
| tangency-labs/solidcraft#458 | no design attached: a cut from a sketch that projects the body's top edges; the steps in the report are not enough to rebuild it |
| tangency-labs/solidcraft#466 | other area: tessellation (revolved cone tip shows indentations; the profile coordinates are not given) |
| tangency-labs/solidcraft#467 | no reproduction data (screenshot or video only) |
| tangency-labs/solidcraft#522 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#586 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#608 | no design attached: a second cut onto a face with an existing cut leaving a tiny edge; only the extrude cut's parameters |
| tangency-labs/solidcraft#611 | performance only, no wrong result |
| tangency-labs/solidcraft#632 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#669 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#746 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#759 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#763 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#767 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#770 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#772 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#823 | other area: import (an imported STEP body: 'lumps: nested shells do not alternate material and void'); the file is not attached |
| tangency-labs/solidcraft#858 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#864 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#873 | the hexagon positions 'next to' the screw are not given, so the touching contact cannot be rebuilt faithfully; the report has only the join's params |
| tangency-labs/solidcraft#887 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#938 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#953 | no design attached: a cup with a square on its inside floor; the square's size and position are not given |
| tangency-labs/solidcraft#967 | tracking issue for the Hole tool audit; its open refusals (slanted faces, #559) are covered by the case 559-through-hole-into-shelled-box-rim and the hole matrix; the rest is UI |
| tangency-labs/solidcraft#987 | other area: threads |
| tangency-labs/solidcraft#990 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#999 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1002 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1008 | other area: fillets |
| tangency-labs/solidcraft#1025 | private design not attached (join of 23 cone/cylinder tools); no recipe |
| tangency-labs/solidcraft#1125 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1126 | no design attached: a Draft of a face with non-perpendicular neighbours about a custom neutral plane; only the Draft parameters |
| tangency-labs/solidcraft#1133 | no design attached (a text sketch extruded from another object, tool with 21 freeform faces) |
| tangency-labs/solidcraft#1137 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1191 | other area: fillets |
| tangency-labs/solidcraft#1202 | no reproduction data (screenshot or video only) |
| tangency-labs/solidcraft#1216 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1225 | needs the user's design (extrudecrash.txt attachment): tapered extrude of tangent circles on an existing body; steps not reproducible from the text |
| tangency-labs/solidcraft#1253 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1308 | property-test PR, tests not a failing case |
| tangency-labs/solidcraft#1317 | UI or customization PR, not geometry |
| tangency-labs/solidcraft#1328 | no reproduction data (screenshot or video only) |
| tangency-labs/solidcraft#1343 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1409 | feature request: Emboss on non-planar ('complex') faces; the current refusal is documented, and no geometry or design is given |
| tangency-labs/solidcraft#1431 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#1436 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1437 | extrude join result beyond the sketch; needs the user's design (earlier features not given) |
| tangency-labs/solidcraft#1440 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1441 | no design attached and the report text is empty beyond the feature's parameters |
| tangency-labs/solidcraft#1451 | other area: import (a STEP model from a public site, not attached; join of a 1 mm extrusion refused) |
| tangency-labs/solidcraft#1466 | surface-modelling feature or proposal, not a failing solid operation |
| tangency-labs/solidcraft#1467 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1471 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1508 | sketch projection of solid edges (sketch area), not a kernel failure |
| tangency-labs/solidcraft#1511 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1531 | feature request (partial taper where the sides would cross); the refusal is intended; needs the user's plate |
| tangency-labs/solidcraft#1552 | feature request: sketch entities as Split Body tools; not a wrong result |
| tangency-labs/solidcraft#1603 | other area: sheet-metal |
| tangency-labs/solidcraft#1662 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1672 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1737 | extrude join leaves a gap after a fillet; the base solid is only in a screenshot |
| tangency-labs/solidcraft#1760 | no design attached ('CPR Sensor' split by a construction plane: 'Intersect: no result') |
| tangency-labs/solidcraft#1788 | extra seam edge from a mirrored sketch, marked possibly intentional; no dimensions |
| tangency-labs/solidcraft#1807 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1834 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1848 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1882 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1891 | profiling or tracing tooling, not geometry |
| tangency-labs/solidcraft#1926 | no design attached; a freeze in a symmetric cut, only a screenshot |
| tangency-labs/solidcraft#1944 | empty report: no parameters, no text |
| tangency-labs/solidcraft#1946 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#1963 | empty report: no parameters, no text |
| tangency-labs/solidcraft#1964 | screenshot only, no parameters or text; no recipe |
| tangency-labs/solidcraft#1965 | not a geometry failure: booleans on mesh bodies are refused by design ('a boolean needs a solid body') |
| tangency-labs/solidcraft#1967 | other area: sweeps (loft reported as not working, no details) |
| tangency-labs/solidcraft#1995 | other area: threads |
| tangency-labs/solidcraft#2048 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2059 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2064 | performance only, no wrong result |
| tangency-labs/solidcraft#2073 | not boolean geometry: inspect.hole_stacks (an inspection command for aligned holes), no wrong kernel result |
| tangency-labs/solidcraft#2074 | part library or fastener fill feature, not a failing operation |
| tangency-labs/solidcraft#2075 | not boolean geometry: parts.fasten (assembly fasteners sized to hole stacks) |
| tangency-labs/solidcraft#2090 | not boolean geometry: inspect.clearance measuring (a shared volume against the union), a measurement feature |
| tangency-labs/solidcraft#2156 | clearance/interference measurement of a pin in its bore (inspect.clearance), not a modelling boolean; the facet crossing tolerance is not a right-answer number a recipe can state |
| tangency-labs/solidcraft#2205 | persistent face names (exact history of a prism boolean) only; the solid it gives is already right, so no geometry answer to grade |
| tangency-labs/solidcraft#2274 | part library or fastener fill feature, not a failing operation |
| tangency-labs/solidcraft#2343 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#2407 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2418 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2428 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#2450 | other area: tessellation (Section Analysis shows a white line at the part's edge; display only) |
| tangency-labs/solidcraft#2454 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2461 | other area: sheet metal ('this machining intersects a folded bend or a nonparallel panel') |
| tangency-labs/solidcraft#2466 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2495 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2497 | not boolean geometry: assembly joint relations (parallel, angle, point on plane) |
| tangency-labs/solidcraft#2503 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2509 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#2522 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2525 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2527 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2534 | no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it |
| tangency-labs/solidcraft#2541 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2543 | other area: import (mesh body from an imported file: a boolean needs a solid body, by design) |
| tangency-labs/solidcraft#2545 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#2551 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2553 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2565 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2566 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2572 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#2574 | feature request, not a wrong result (a hexagonal or skip-instance pattern option) |
| tangency-labs/solidcraft#2581 | UI only: no geometry |
| tangency-labs/solidcraft#2586 | needs the user's design: draft refused on faces next to the drafted walls, only the command is reported |
| tangency-labs/solidcraft#2599 | other area: assemblies (joint.as_built does not follow a parameter change), not kernel geometry |
| tangency-labs/solidcraft#2602 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2610 | no description, only a screenshot or nothing: no geometry to rebuild |
| tangency-labs/solidcraft#2696 | CI/test infrastructure only (xtask skips the nightly boolean_props tests), no geometry |
| tangency-labs/solidcraft#2740 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2750 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2765 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2766 | needs the user's design: draft refused on faces next to the drafted walls, only the command is reported |
| tangency-labs/solidcraft#2768 | documentation |
| tangency-labs/solidcraft#2770 | needs the user's design (a 22 KB Gridfinity base shared with the author's permission); not rebuilt or committed |
| tangency-labs/solidcraft#2783 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2798 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2799 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2803 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2843 | UI only: no geometry |
| tangency-labs/solidcraft#2873 | UI/feature request: press-pull on a round face has no selection path; no wrong geometry to grade |
| tangency-labs/solidcraft#2876 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#2882 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2885 | UI: the pattern got a construction axis name the command does not accept; no wrong geometry |
| tangency-labs/solidcraft#2887 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2890 | UI only: no geometry |
| tangency-labs/solidcraft#2911 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2941 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2946 | other area: import (B-spline patch and loosely-fitted imported faces; no small public geometry rebuilt) |
| tangency-labs/solidcraft#2949 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2950 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2959 | UI: selecting the whole sketch line (with its fillet) as a split tool; no wrong geometry |
| tangency-labs/solidcraft#2965 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2968 | UI or customization PR, not geometry |
| tangency-labs/solidcraft#2970 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2973 | no description, only a screenshot or nothing: no geometry to rebuild |
| tangency-labs/solidcraft#2979 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#2997 | no description, only a screenshot or nothing: no geometry to rebuild |
| tangency-labs/solidcraft#3007 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3013 | performance only, no wrong result |
| tangency-labs/solidcraft#3019 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3026 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3034 | UI only: no geometry |
| tangency-labs/solidcraft#3035 | perf only: the motivating design is private, no wrong result |
| tangency-labs/solidcraft#3038 | other area: import (mesh body from an imported file: a boolean needs a solid body, by design) |
| tangency-labs/solidcraft#3042 | UI: no visual feedback when a patterned hole misses the surface; no geometry |
| tangency-labs/solidcraft#3050 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3051 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3056 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3079 | needs the user's design: the sketch loop is not closed, no geometry to rebuild |
| tangency-labs/solidcraft#3090 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3100 | other area: import (split of a body imported from STEP; the file is not available) |
| tangency-labs/solidcraft#3101 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3104 | performance only, no wrong result |
| tangency-labs/solidcraft#3112 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3117 | no description, only a screenshot or nothing: no geometry to rebuild |
| tangency-labs/solidcraft#3118 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3126 | sphere placement UI (centre taken from the picked point); the cut itself is not wrong |
| tangency-labs/solidcraft#3130 | other area: threads |
| tangency-labs/solidcraft#3132 | feature request (pick target bodies in Edit Extrude); no wrong result |
| tangency-labs/solidcraft#3134 | performance only, no wrong result |
| tangency-labs/solidcraft#3138 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3147 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3149 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3157 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3176 | needs the user's design: draft refused on faces next to the drafted walls, only the command is reported |
| tangency-labs/solidcraft#3185 | other area: crashes (a boolean retry hang on a broken candidate; the design from the report is private) |
| tangency-labs/solidcraft#3192 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3193 | no description, only a screenshot or nothing: no geometry to rebuild |
| tangency-labs/solidcraft#3194 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3205 | UI only: no geometry |
| tangency-labs/solidcraft#3211 | no description, only a screenshot or nothing: no geometry to rebuild |
| tangency-labs/solidcraft#3212 | other area: import (an imported assembly, nested shells) |
| tangency-labs/solidcraft#3226 | test layout housekeeping |
| tangency-labs/solidcraft#3227 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3232 | no description or geometry: only that an intersect does not seem to work |
| tangency-labs/solidcraft#3247 | feature request, not a wrong result (a hexagonal or skip-instance pattern option) |
| tangency-labs/solidcraft#3251 | other area: import (mesh body from an imported file: a boolean needs a solid body, by design) |
| tangency-labs/solidcraft#3255 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3268 | profiling or tracing tooling, not geometry |
| tangency-labs/solidcraft#3271 | UI only: no geometry |
| tangency-labs/solidcraft#3272 | fix for #2970 (bore guard in a two-profile join): geometry only in the user's design, no dimensions |
| tangency-labs/solidcraft#3276 | other area: fillets (the failing step is the fillet/chamfer after three extrudes; no dimensions given) |
| tangency-labs/solidcraft#3279 | sketch pattern editing (sketch.pattern.circular), not solid geometry |
| tangency-labs/solidcraft#3293 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3302 | UI: the pattern was started with nothing selected; no geometry |
| tangency-labs/solidcraft#3324 | other area: sheet metal (flat pattern and DXF ignore non-sheet features) |
| tangency-labs/solidcraft#3374 | other area: import (mesh body from an imported file: a boolean needs a solid body, by design) |
| tangency-labs/solidcraft#3396 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3403 | needs the user's design: only the failing command's parameters are reported, no geometry to rebuild |
| tangency-labs/solidcraft#3404 | needs a user's design (plate with a tab profile) that can't be rebuilt: the report names only the failing join extrude |
| tangency-labs/solidcraft#3405 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3406 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face) |
| tangency-labs/solidcraft#3411 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of three bodies, 'Union: no result') |
| tangency-labs/solidcraft#3426 | UI only: the extrude preview's initial direction on a picked face, no wrong geometry |
| tangency-labs/solidcraft#3427 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3428 | other area: crashes (kernel panic in a cut with an imported STEP bolt; the STEP file is from a parts library and can't be rebuilt) |
| tangency-labs/solidcraft#3448 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude of two profiles, 'Union: no result', cylinders) |
| tangency-labs/solidcraft#3450 | solid.move pivot/point-to-point selection UI, no geometry failure |
| tangency-labs/solidcraft#3479 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (rectangular pattern of a chamfer and an extrude: 'no edge near ...') |
| tangency-labs/solidcraft#3486 | solid.move pivot/point-to-point selection UI, no geometry failure |
| tangency-labs/solidcraft#3496 | other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported') |
| tangency-labs/solidcraft#3498 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face) |
| tangency-labs/solidcraft#3514 | other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry) |
| tangency-labs/solidcraft#3517 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#3518 | needs a user's design that can't be rebuilt synthetically: a plane split (XZ) of one body of a 41-body design, no geometry given; plain plane splits are covered by case 13 |
| tangency-labs/solidcraft#3525 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#3531 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3539 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (thin extrude of a curve, join) |
| tangency-labs/solidcraft#3547 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (cut through an extruded spline) |
| tangency-labs/solidcraft#3551 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#3563 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3569 | UI or customization PR, not geometry |
| tangency-labs/solidcraft#3578 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of a revolve with a chamfered box: the description is too vague to rebuild) |
| tangency-labs/solidcraft#3586 | other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry) |
| tangency-labs/solidcraft#3592 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#3594 | feature (wrap sketches onto cylinders), not a failing operation |
| tangency-labs/solidcraft#3598 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (a fake edge left after an extrude chain on a chamfer) |
| tangency-labs/solidcraft#3602 | needs a user's design that can't be rebuilt synthetically: a split by a sketch line (l8 of sketch 9) of one body, the body is not given; plain splits are covered by case 13 |
| tangency-labs/solidcraft#3607 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3608 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (circular pattern of an extrude feature, cut 'no result') |
| tangency-labs/solidcraft#3632 | UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry |
| tangency-labs/solidcraft#3634 | UI only: hole tool auto-switching to multi-hole mode |
| tangency-labs/solidcraft#3645 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3648 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3649 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude refusing for zero-thickness edge contact; the contact is not described, see #3841 for the circular-edge case) |
| tangency-labs/solidcraft#3656 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3657 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3667 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3680 | other area: sheet metal (a hole in sheet-metal material is refused) |
| tangency-labs/solidcraft#3707 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3709 | no geometry: a video of cutting a bolt in another CAD tool, no model or command |
| tangency-labs/solidcraft#3725 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3727 | UI only: sketch.pattern.circular was run with no sketch being edited |
| tangency-labs/solidcraft#3732 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (French report: Combine cut keeping the tool gives nothing, parts are named Equerre and Rallonge2) |
| tangency-labs/solidcraft#3734 | not geometry: the failing step is a profile that is not closed in the user's sketch |
| tangency-labs/solidcraft#3753 | other area: fillets (a chamfer inside a circular pattern is too large for the edge, 'grow the part'; the pattern itself is not at fault) |
| tangency-labs/solidcraft#3756 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#3757 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design) |
| tangency-labs/solidcraft#3767 | not geometry: a face lineage refusal ('no supported stable semantic lineage') on a user's body |
| tangency-labs/solidcraft#3777 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3785 | not geometry: feature request (pattern along a closed path around a rounded rectangle) |
| tangency-labs/solidcraft#3787 | other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported') |
| tangency-labs/solidcraft#3789 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3791 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3793 | no geometry: a screenshot only, the report gives no command or model |
| tangency-labs/solidcraft#3803 | other area: UI only (pattern of a sketch feature is not offered: 'Sketch2 cannot be patterned') |
| tangency-labs/solidcraft#3808 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face) |
| tangency-labs/solidcraft#3811 | UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir}) |
| tangency-labs/solidcraft#3823 | not geometry: an expression error (e is not a parameter) |
| tangency-labs/solidcraft#3824 | other area: threads (a threaded hole needs a cylindrical face: 'no cylindrical face there to thread') |
| tangency-labs/solidcraft#3843 | UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir}) |
| tangency-labs/solidcraft#3844 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (holes of an extrude cut, flange_thickenss parameter, not visible in the final result) |
| tangency-labs/solidcraft#3865 | UI only: shift-click multiple selection in the Combine dialog |
| tangency-labs/solidcraft#3866 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design) |
| tangency-labs/solidcraft#3869 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design) |
| tangency-labs/solidcraft#3879 | other area: import (the extrude acts on an imported object's orientation / a STEP file's face) |
| tangency-labs/solidcraft#3900 | transform input validation (refuses non-affine matrices); not a geometry failure |
| tangency-labs/solidcraft#3904 | UI only: selecting several non-coplanar profiles in Extrude (which profiles the dialog accepts), no wrong geometry |
| tangency-labs/solidcraft#3907 | performance only, no wrong result |
| tangency-labs/solidcraft#3926 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut from a face of a user's body) |
| tangency-labs/solidcraft#3932 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3948 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3961 | UI only: should hidden bodies be left out of a cut: a visibility policy, the cut itself is right |
| tangency-labs/solidcraft#3975 | not geometry: feature request (rework of the hole tool's positioning) |
| tangency-labs/solidcraft#3976 | refactor or rollup PR with no behaviour change to grade |
| tangency-labs/solidcraft#3978 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#3992 | kernel evaluation or tracking, not a geometry failure |
| tangency-labs/solidcraft#3997 | kernel evaluation or tracking, not a geometry failure |
| tangency-labs/solidcraft#4002 | construct.plane.three_points selection UI |
| tangency-labs/solidcraft#4012 | kernel evaluation or tracking, not a geometry failure |
| tangency-labs/solidcraft#4017 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#4024 | fill tolerance check in geom, no geometry case |
| tangency-labs/solidcraft#4036 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#4041 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut 'up to' another body: 'nothing lies between the profile and the To object') |
| tangency-labs/solidcraft#4042 | UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry |
| tangency-labs/solidcraft#4070 | not geometry: hole not created, the report gives only the sketch point id |
| tangency-labs/solidcraft#4075 | needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry |
| tangency-labs/solidcraft#4077 | UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry |
| tangency-labs/solidcraft#4098 | not geometry: documentation of the taper sign (a positive taper makes the walls lean outward); the behaviour is not wrong |
| tangency-labs/solidcraft#4111 | UI only: Press/Pull opens Extrude on a selection with no planar face or profile |
| tangency-labs/solidcraft#4124 | other area: import (the extrude acts on an imported object's orientation / a STEP file's face) |
| tangency-labs/solidcraft#4148 | revolve join 'no result' on a sketch not given in the report; needs the user's design |
crashes
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#661 | truck intersection_curve unwrap in solid.hole at a position on a design only in the reporter's crash folder; no recipe to rebuild |
| tangency-labs/solidcraft#924 | Windows-versus-Linux differences in the robustness goldens; platform float behaviour, no case geometry |
| tangency-labs/solidcraft#1023 | hole hang shown only in a video and a private design file; no recipe to rebuild |
| tangency-labs/solidcraft#1024 | not geometry: Windows heap corruption in the thread unit-test process (dependency/memory bug), and threads are another area (other area: threads) |
| tangency-labs/solidcraft#1104 | truck intersection_curve unwrap in solid.extrude: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically |
| tangency-labs/solidcraft#1123 | unclean exit in solid.extrude after a slot sketch dragged many times: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically |
| tangency-labs/solidcraft#1147 | perf only, no wrong result: 1,300-body design built over MCP is slow in the engine and the UI (fixed by #1148/#1152/#1154/#1158) |
| tangency-labs/solidcraft#1337 | extrude 'to object' on an imported STEP bracket: needs the user's STEP file |
| tangency-labs/solidcraft#1351 | unclean exit in solid.combine after a mirror of an extruded sketch: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically |
| tangency-labs/solidcraft#1374 | other area: tessellation (STEP import meshing runs out of memory on a private 480-solid file; the mesher's curve division) |
| tangency-labs/solidcraft#1400 | other area: tessellation (a far-out boundary parameter spikes a face; meshing takes minutes) |
| tangency-labs/solidcraft#1411 | other area: threads (solid.coil crash, no geometry beyond the command; coil is a helical sweep) |
| tangency-labs/solidcraft#1597 | not geometry: kernel roadmap and contribution guide |
| tangency-labs/solidcraft#1856 | 20-tooth lofted helical pinion join is slow: the scripts are only in a downloadable zip (the body gives the join command, not the sketches and lofts); duplicate in spirit of #2992 (case 2992) |
| tangency-labs/solidcraft#1957 | unclean exit in file.export of a bird-house design: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically; the STEP-export hang family is case 1985 |
| tangency-labs/solidcraft#2037 | multi-face extrusion preview/OK freeze and failing cut on an imported STEP model: needs the user's STEP file, and a UI/preview responsiveness report |
| tangency-labs/solidcraft#2038 | other area: threads (second modelled thread on one body; join of two faceted threaded bodies) |
| tangency-labs/solidcraft#2451 | other area: threads (solid.thread unclean exit) |
| tangency-labs/solidcraft#2467 | not geometry: renaming a body recomputes the features after it on the window thread (perf/UI only, no wrong result) |
| tangency-labs/solidcraft#2470 | other area: threads (solid.thread stack overflow on a modelled thread) |
| tangency-labs/solidcraft#2508 | other area: tessellation (bound on runaway closing polylines in the mesher); the STEP export hang itself is case 1985 |
| tangency-labs/solidcraft#2552 | other area: threads (solid.coil crash, helical sweep cut; no backtrace) |
| tangency-labs/solidcraft#2570 | loft freeze from a design with an arc profile and a non-convex polyline profile that the report does not give; the web build only |
| tangency-labs/solidcraft#2796 | other area: threads (solid.thread unclean exit) |
| tangency-labs/solidcraft#2891 | other area: sweeps (twisted sweep cut through a tube freezes) |
| tangency-labs/solidcraft#2974 | perf only, no wrong result: a counterbored hole pattern is ~8x slower with a joined cylinder elsewhere; results already match hand calculation |
| tangency-labs/solidcraft#3066 | unclean exit in solid.extrude with a parametric sketch (nozL): needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically |
| tangency-labs/solidcraft#3085 | fillet/chamfer crash after combine with an imported STEP body: needs the user's STEP file (and edge selection is UI) |
| tangency-labs/solidcraft#3088 | other area: threads (solid.coil join crash, no backtrace) |
| tangency-labs/solidcraft#3207 | perf only: faster slow unit tests (clearance, inside_index, fill reference), same answers |
| tangency-labs/solidcraft#3368 | other area: threads (finely faceted booleans, repro is a modelled-thread join; thread cases cover it) |
| tangency-labs/solidcraft#3386 | other area: threads (solid.thread unclean exit) |
| tangency-labs/solidcraft#3410 | other area: threads (faceted-boolean stack overflow on a modelled thread, #2470) |
| tangency-labs/solidcraft#3430 | not a kernel operation: unclean exit at startup in the graphics surface configure on macOS |
| tangency-labs/solidcraft#3473 | unclean exit in a 16-fold circular pattern of a cylinder cut driven by parameters: the recipe is only in an attached replay.json, and the issue gives no dimensions |
| tangency-labs/solidcraft#3695 | other area: sweeps (twisted sweep cut through a tube, bounded intersection work) |
| tangency-labs/solidcraft#3731 | perf only, no wrong result: joins onto drafted walls are 20-100x slower than onto vertical ones (results are correct apart from a 4e-4 mm retry displacement); the 67-flute design takes tens of minutes and a one-line recipe can't pin it |
| tangency-labs/solidcraft#3737 | not geometry: UI highlight work on the main thread while orbiting an imported model (edge highlight) |
| tangency-labs/solidcraft#3745 | not geometry: hover highlight of a large thread freezes the UI (fixed by #3766/#3818) |
| tangency-labs/solidcraft#3818 | not geometry: hover highlight of a helical edge (mesh tangent chain), UI freeze fixed, same results |
| tangency-labs/solidcraft#3892 | not geometry: browser tree frame time on a large nested STEP assembly (UI) |
| tangency-labs/solidcraft#3897 | other area: sweeps (ring profile swept along a short arc with Join freezes) |
| tangency-labs/solidcraft#3962 | unclean exit in solid.combine cut on macOS: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically |
| tangency-labs/solidcraft#4031 | spade CDT assertion in solid.extrude of a face with Join: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically (no geometry given) |
| tangency-labs/solidcraft#4102 | booleans on a FreeCAD-exported STEP are ~15x slower: needs the 104 KB FreeCAD STEP file (written by another CAD, can't be rebuilt by hand), results are correct (perf only) |
| tangency-labs/solidcraft#4149 | other area: threads (solid.thread stack overflow on an internal M10x1.5 modelled thread) |
fillets
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#9 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#10 | meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild |
| tangency-labs/solidcraft#15 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#29 | other area: shell (including the plastic lip on a shelled rim) |
| tangency-labs/solidcraft#46 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#52 | feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source |
| tangency-labs/solidcraft#58 | saddle fillet between two cylinders: volume, area and counts are right and the defect is a 0.05 mm surface deviation from the rolling-ball envelope: needs a surface-deviation grading field the rig lacks (tests/oracle/35 holds the geometry) |
| tangency-labs/solidcraft#68 | other area: booleans |
| tangency-labs/solidcraft#102 | fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form |
| tangency-labs/solidcraft#108 | fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form |
| tangency-labs/solidcraft#109 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#121 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#132 | feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source |
| tangency-labs/solidcraft#215 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be perpendicular to the edge" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#293 | feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81 |
| tangency-labs/solidcraft#311 | other area: tessellation |
| tangency-labs/solidcraft#362 | fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form |
| tangency-labs/solidcraft#388 | feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81 |
| tangency-labs/solidcraft#391 | other area: booleans |
| tangency-labs/solidcraft#397 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the ends of the edges must be square to them (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#404 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#431 | fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame) |
| tangency-labs/solidcraft#438 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the ends of the edges must be square to them (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#477 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#493 | sketch attachment to cut walls and chamfer faces: sketch plane selection, not blend geometry |
| tangency-labs/solidcraft#612 | other area: import (STEP export of fillet faces as B-splines) |
| tangency-labs/solidcraft#618 | other area: threads |
| tangency-labs/solidcraft#625 | sketch attachment to cut walls and chamfer faces: sketch plane selection, not blend geometry |
| tangency-labs/solidcraft#675 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#691 | auto-filed from a private design: only the pick points and the error "not supported yet: degenerate rolling-ball spine" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#749 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#752 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#764 | surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer |
| tangency-labs/solidcraft#769 | surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer |
| tangency-labs/solidcraft#775 | topological naming after a timeline edit (shell thickness changed): fillet picks follow, no solid geometry of its own |
| tangency-labs/solidcraft#776 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#777 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#789 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#796 | other area: tessellation |
| tangency-labs/solidcraft#810 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#811 | other area: tessellation |
| tangency-labs/solidcraft#818 | other area: booleans |
| tangency-labs/solidcraft#827 | other area: booleans |
| tangency-labs/solidcraft#828 | auto-filed from a private design: only the pick points and the error "not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#855 | variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request |
| tangency-labs/solidcraft#882 | other area: booleans |
| tangency-labs/solidcraft#884 | fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame) |
| tangency-labs/solidcraft#903 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#949 | fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame) |
| tangency-labs/solidcraft#962 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#978 | other area: sheet-metal |
| tangency-labs/solidcraft#984 | auto-filed from a private design: only the pick points and the error "not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#989 | auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#992 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#1001 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1026 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1030 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#1039 | auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1066 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#1090 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1092 | other area: sheet-metal |
| tangency-labs/solidcraft#1113 | other area: tessellation |
| tangency-labs/solidcraft#1136 | feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source |
| tangency-labs/solidcraft#1176 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1183 | other area: booleans |
| tangency-labs/solidcraft#1198 | other area: import (STEP export of fillet faces as B-splines) |
| tangency-labs/solidcraft#1208 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1219 | other area: booleans |
| tangency-labs/solidcraft#1228 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1249 | surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer |
| tangency-labs/solidcraft#1263 | other area: tessellation |
| tangency-labs/solidcraft#1275 | other area: booleans |
| tangency-labs/solidcraft#1276 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1281 | other area: tessellation |
| tangency-labs/solidcraft#1282 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1293 | no longer reproduces; the hinge knuckle cap circle is oracle case 63-hinge-knuckle |
| tangency-labs/solidcraft#1303 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1314 | other area: sheet-metal |
| tangency-labs/solidcraft#1356 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1370 | auto-filed from a private design: only the pick points and the error "not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1372 | chamfer chain ending at two existing bevels: only the removed volume (49.147) is quoted, the U-shaped part is not described |
| tangency-labs/solidcraft#1384 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1389 | auto-filed from a private design: only the pick points and the error "curve blend: could not fit the rolling-ball surface within the accuracy and section limits (the operation failed: not supported yet: only straight edges can be " are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1394 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1420 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1421 | other area: booleans |
| tangency-labs/solidcraft#1533 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1535 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#1543 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1553 | render interchange (glTF/Blender export), no geometry |
| tangency-labs/solidcraft#1572 | auto-filed from a private design: only the pick points and the error "not supported yet: each end of the edge must touch exactly one more face" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1573 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1597 | meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild |
| tangency-labs/solidcraft#1617 | other area: booleans |
| tangency-labs/solidcraft#1642 | surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer |
| tangency-labs/solidcraft#1684 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#1690 | other area: booleans |
| tangency-labs/solidcraft#1691 | other area: booleans |
| tangency-labs/solidcraft#1692 | other area: booleans |
| tangency-labs/solidcraft#1719 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1728 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1774 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1792 | auto-filed from a private design: only the pick points and the error "not supported yet: only straight edges" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1824 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1826 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1854 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#1875 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1876 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1933 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#1940 | auto-filed from a private design: only the pick points and the error "not supported yet: seams on both sides of a corner of the edge chain (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1945 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1951 | auto-filed from a private design: only the pick points and the error "not supported yet: 10 mm is too large for this chamfer: it runs past the faces beside the edge into other geometry; the largest size that fits is 7.5 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1955 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces; the largest radius that fits is 4 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2002 | feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81 |
| tangency-labs/solidcraft#2040 | other area: booleans |
| tangency-labs/solidcraft#2041 | other area: booleans |
| tangency-labs/solidcraft#2042 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2044 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#2051 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2081 | auto-filed from a private design: only the pick points and the error "not supported yet: seams on both sides of a corner of the edge chain (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2083 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2116 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2128 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2135 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2170 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2174 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#2189 | auto-filed from a private design: only the pick points and the error "curve blend: could not fit the rolling-ball surface within the accuracy and section limits" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2192 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2194 | claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild |
| tangency-labs/solidcraft#2213 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2215 | auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2230 | auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2245 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2269 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2296 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2301 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#2318 | other area: import (STEP geometry or crashes); the STEP fixture is not in the source |
| tangency-labs/solidcraft#2320 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#2375 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be planar" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2379 | auto-filed from a private design: only the pick points and the error "invalid parameters for sketch.fillet: fillets and chamfers work on two lines" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2383 | auto-filed from a private design: only the pick points and the error "invalid input: the edge at [-165.794, 33.018, 10.000] is smooth: the faces on either side meet tangentially there, so there is no corner to chamfer; pick the sh" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2394 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2408 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2420 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2422 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2439 | auto-filed from a private design: only the pick points and the error "not supported yet: a fillet larger than the faces next to it; the largest radius that fits is 50.82 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2472 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2477 | auto-filed from a private design: only the pick points and the error "not supported yet: chamfers ending at a concave corner" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2485 | mitre between separately created bottom rounds plus the upright, R2, on a shelled 40 x 80 x 27 box: the mitre pick is not given and no closed form; the same rounds-meeting-a-mitre geometry is case 1557 |
| tangency-labs/solidcraft#2487 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#2488 | surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer |
| tangency-labs/solidcraft#2490 | chamfer of a straight lip at a tangent wall junction: the reconstruction file is not in the source and 20 mm slot, 60 mm extrusion and R60 cut are not enough to rebuild it |
| tangency-labs/solidcraft#2500 | auto-filed from a private design: only the pick points and the error "invalid parameters for sketch.fillet: the radius is too large for that corner (it needs 5.000 mm of each line)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2519 | empty report: the body was never filled in, no geometry or error recorded |
| tangency-labs/solidcraft#2532 | empty report: the body was never filled in, no geometry or error recorded |
| tangency-labs/solidcraft#2533 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2538 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2567 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2573 | empty report: the body was never filled in, no geometry or error recorded |
| tangency-labs/solidcraft#2589 | auto-filed from a private design: only the pick points and the error "invalid input: the edge at [6.000, 50.000, 4.000] is smooth: the faces on either side meet tangentially there, so there is no corner to chamfer; pick the sharp " are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2591 | other area: booleans |
| tangency-labs/solidcraft#2593 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be planar" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2653 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2654 | auto-filed from a private design: only the pick points and the error "not supported yet: only straight edges" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2663 | meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild |
| tangency-labs/solidcraft#2686 | other area: booleans |
| tangency-labs/solidcraft#2690 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2692 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2694 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2695 | request that a chamfer too large clips instead of erroring (depends on a private design that could not be reproduced); the clipping behaviour is not defined |
| tangency-labs/solidcraft#2699 | report without a reproducible description (picture only or several vague problems) |
| tangency-labs/solidcraft#2703 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2704 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2706 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be perpendicular to the edge" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2711 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#2771 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2781 | auto-filed from a private design: only the pick points and the error "not supported yet: 5.5 mm is too large for this chamfer: the result changes 2557 mm³ of the part, more than the chamfer can (at most 423 mm³)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2784 | could not be reproduced on a plain rebuild (cylinder with a shaft; a 10 mm peg chamfers at 1 mm); the private design is needed |
| tangency-labs/solidcraft#2794 | auto-filed from a private design: only the pick points and the error "not supported yet: blending a loop with sharp corners next to arcs" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2800 | auto-filed from a private design: only the pick points and the error "not supported yet: 5 mm is too large for this fillet: it runs past the faces beside the edge into other geometry; the largest radius that fits is 4.429 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2822 | other area: threads |
| tangency-labs/solidcraft#2856 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#2874 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2894 | right answer is a design choice (refuse, or cut through the faces) for chamfers wider than the faces they join: not gradeable without picking one |
| tangency-labs/solidcraft#2921 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2966 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2971 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2972 | auto-filed from a private design: only the pick points and the error "invalid input: the edge at [0.012, -28.000, 18.000] is smooth: the faces on either side meet tangentially there, so there is no corner to fillet; pick the sharp" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2976 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#2983 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#2986 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#3062 | claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild |
| tangency-labs/solidcraft#3064 | auto-filed from a private design: only the pick points and the error "not supported yet: 6 mm is too large for this fillet: it runs past the faces beside the edge into other geometry" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3075 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#3082 | auto-filed from a private design: only the pick points and the error "not supported yet: only straight edges" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3085 | other area: import (STEP geometry or crashes); the STEP fixture is not in the source |
| tangency-labs/solidcraft#3091 | auto-filed from a private design: only the pick points and the error "not supported yet: 20 mm is too large for this fillet: it runs past the faces beside the edge into other geometry; the largest radius that fits is 19.21 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3106 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#3115 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#3119 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3125 | auto-filed from a private design: only the pick points and the error "not supported yet: 1 mm is too large for this chamfer: the result changes 77 mm³ of the part, more than the chamfer can (at most 22 mm³)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3150 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#3169 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#3172 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3179 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#3180 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend uses up a neighbouring face with more edges" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3190 | curved chain ending across two planar end faces (an L-shaped wall on a plate with slanted sides): fixture not described precisely enough to rebuild, no closed-form volume |
| tangency-labs/solidcraft#3233 | report without a reproducible description (picture only or several vague problems) |
| tangency-labs/solidcraft#3282 | empty report: the body was never filled in, no geometry or error recorded |
| tangency-labs/solidcraft#3284 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3297 | claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild |
| tangency-labs/solidcraft#3317 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than a corner radius (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3333 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3342 | documented limit of G2 fillets (curved or non-perpendicular ends are refused with a clear message): no closed form for the corner blend |
| tangency-labs/solidcraft#3370 | UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369 |
| tangency-labs/solidcraft#3377 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3392 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3398 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3400 | UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369 |
| tangency-labs/solidcraft#3401 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3418 | other area: sheet-metal |
| tangency-labs/solidcraft#3436 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3437 | UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369 |
| tangency-labs/solidcraft#3442 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3445 | empty template: only a pick and a 20.5 mm distance are recorded, no description or error |
| tangency-labs/solidcraft#3454 | other area: booleans |
| tangency-labs/solidcraft#3462 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3464 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius that fits is 1 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3465 | other area: booleans |
| tangency-labs/solidcraft#3468 | other area: shell (offset face next to a fillet) |
| tangency-labs/solidcraft#3493 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3501 | auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be planar" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3508 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3520 | auto-filed from a private design: only the pick points and the error "invalid parameters for sketch.fillet: the lines must share a corner point" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3533 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3548 | curved chain ending across two planar end faces (an L-shaped wall on a plate with slanted sides): fixture not described precisely enough to rebuild, no closed-form volume |
| tangency-labs/solidcraft#3549 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#3552 | claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild |
| tangency-labs/solidcraft#3561 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius that fits is 0.075 mm" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3562 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend's end on its end face" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3565 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3572 | report without a reproducible description (picture only or several vague problems) |
| tangency-labs/solidcraft#3573 | other area: shell (including the plastic lip on a shelled rim) |
| tangency-labs/solidcraft#3575 | private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild) |
| tangency-labs/solidcraft#3576 | other area: shell (including the plastic lip on a shelled rim) |
| tangency-labs/solidcraft#3587 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3606 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3611 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3630 | report without a reproducible description (picture only or several vague problems) |
| tangency-labs/solidcraft#3644 | auto-filed from a private design: only the pick points and the error "invalid parameters for solid.chamfer: no edge at [0.000000000000002136321436930869, -5.9999999999999885, -183]: the nearest edge is 258.940 mm away" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3651 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend does not cross the edge between the end faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3684 | auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the resampled spine (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3686 | auto-filed from a private design: only the pick points and the error "not supported yet: degenerate rolling-ball spine" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3694 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3716 | surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer |
| tangency-labs/solidcraft#3721 | other area: shell (including the plastic lip on a shelled rim) |
| tangency-labs/solidcraft#3735 | empty report: the body was never filled in, no geometry or error recorded |
| tangency-labs/solidcraft#3739 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3746 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3747 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#3763 | UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry |
| tangency-labs/solidcraft#3842 | refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline) |
| tangency-labs/solidcraft#3853 | other area: sheet-metal |
| tangency-labs/solidcraft#3854 | auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild |
| tangency-labs/solidcraft#3860 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#3864 | other area: import (STEP geometry or crashes); the STEP fixture is not in the source |
| tangency-labs/solidcraft#3898 | other area: shell (offset face next to a fillet) |
| tangency-labs/solidcraft#3908 | claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild |
| tangency-labs/solidcraft#3910 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3943 | could not be reproduced on a plain rebuild (cylinder with a shaft; a 10 mm peg chamfers at 1 mm); the private design is needed |
| tangency-labs/solidcraft#3971 | auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3982 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4027 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4034 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4047 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4066 | auto-filed from a private design: only the pick points and the error "not supported yet: 3.5 mm is too large for this chamfer: the result changes 1732 mm³ of the part, more than the chamfer can (at most 328 mm³)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4076 | auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4079 | auto-filed from a private design: only the pick points and the error "not supported yet: both ends touch the same face" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4083 | private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild) |
| tangency-labs/solidcraft#4097 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#4106 | sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade |
| tangency-labs/solidcraft#4133 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4137 | empty report: the body was never filled in, no geometry or error recorded |
| tangency-labs/solidcraft#4140 | private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild) |
| tangency-labs/solidcraft#4145 | auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4157 | auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild |
| tangency-labs/solidcraft#4160 | sketch fillet of two 3D-sketch curves refused ("a must be a line"): 3D sketch, not solid geometry |
import
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#11 | export-only: STEP export merging user-split faces; no import geometry |
| tangency-labs/solidcraft#14 | needs Fusion-written IGES files (commercial CAD output) that can't be rebuilt; the IGES reader's synthetic cases are 3359, 3806, 3845, 3886, 3912, 3913, 3972 |
| tangency-labs/solidcraft#200 | feature request (.f3z history import), no geometry |
| tangency-labs/solidcraft#327 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#461 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#469 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#626 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#688 | feature request (FreeCAD .FCStd import), no geometry |
| tangency-labs/solidcraft#1017 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#1033 | performance only (large PCB STEP loads slowly), no wrong result |
| tangency-labs/solidcraft#1120 | UI face selection on an imported STEP, no geometry spec |
| tangency-labs/solidcraft#1161 | feature request (external I/O library), no geometry |
| tangency-labs/solidcraft#1369 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#1397 | CI corpus of real-world files, tolerance-based; not a hand-writable geometry case |
| tangency-labs/solidcraft#1452 | periodic cylinder trim in a two-body STEP; needs the reporter's files, not attached and not rebuildable from the description |
| tangency-labs/solidcraft#1468 | needs the reporter's STEP file (seam artefact in display); looks like tessellation, other area: tessellation |
| tangency-labs/solidcraft#1600 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#1606 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#1609 | metadata/assembly naming of IGES parts, no geometry consequence |
| tangency-labs/solidcraft#1613 | Fusion .f3d exchange provider (closed PR), not geometry |
| tangency-labs/solidcraft#1626 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#1706 | needs the Fusion-written threaded part (wrong coordinates and negative volume); cause unknown, cannot be rebuilt synthetically |
| tangency-labs/solidcraft#1708 | F3D import (editable history), not STEP/IGES geometry |
| tangency-labs/solidcraft#1709 | F3D import (editable history), not STEP/IGES geometry |
| tangency-labs/solidcraft#1777 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#1783 | FreeCAD file refused on a resource budget; needs the reporter's file |
| tangency-labs/solidcraft#1784 | memory use of a 38 MB STEP import; crash/performance, no hand-writable geometry; other area: crashes |
| tangency-labs/solidcraft#1928 | export-only: revolved faces scaled across their axis written as NURBS |
| tangency-labs/solidcraft#1934 | hang on a user's STEP file (gehaeuse82.stp), performance; no synthetic repro |
| tangency-labs/solidcraft#2052 | DXF import, not STEP/IGES |
| tangency-labs/solidcraft#2127 | 3MF import, not STEP/IGES |
| tangency-labs/solidcraft#2579 | other area: booleans (divide_face loses a small hole in a large tilted plate) |
| tangency-labs/solidcraft#2605 | SVG import UI, no geometry |
| tangency-labs/solidcraft#2748 | parameter import, no geometry |
| tangency-labs/solidcraft#2776 | parameter import performance, no geometry |
| tangency-labs/solidcraft#2809 | performance only (orientation meshing of periodic faces, minutes per part), no wrong result |
| tangency-labs/solidcraft#2814 | performance only (opening a large assembly takes an hour), no wrong result |
| tangency-labs/solidcraft#2872 | placement after 'stand it up' makes a sketch/extrude land elsewhere: UI/placement, not import geometry; no file to rebuild |
| tangency-labs/solidcraft#2875 | performance only (orient each instanced part once) |
| tangency-labs/solidcraft#2918 | performance/contract tests for repeated instances, no wrong geometry |
| tangency-labs/solidcraft#2998 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#2999 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#3046 | performance only (parallel read of distinct parts) |
| tangency-labs/solidcraft#3047 | performance only (mesh an instanced part once) |
| tangency-labs/solidcraft#3093 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#3102 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#3108 | performance only (STEP load time), no wrong result |
| tangency-labs/solidcraft#3209 | FreeCAD/Rhino import decode caps, not STEP/IGES |
| tangency-labs/solidcraft#3216 | CSV parameter import, no geometry |
| tangency-labs/solidcraft#3221 | design file size limit when saving a large STEP import, not geometry |
| tangency-labs/solidcraft#3223 | UI/placement after 'stand it up' (extrude lands at 90 degrees); no file to rebuild; same class as #2872 |
| tangency-labs/solidcraft#3237 | MCP feature request (reverse engineering STEP files), no geometry |
| tangency-labs/solidcraft#3289 | assembly cap/refusal policy for huge assemblies (50,000 instances), needs a huge synthetic assembly and is not a geometry answer |
| tangency-labs/solidcraft#3394 | export-only: STEP export drops cone faces for other readers (fixed by #3557) |
| tangency-labs/solidcraft#3431 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#3476 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#3537 | tolerance persistence across saving a design, not import geometry |
| tangency-labs/solidcraft#3557 | export-only: loop order of merged cone and cylinder faces on STEP export |
| tangency-labs/solidcraft#3595 | performance only (orbit stutter with ~100 bodies) |
| tangency-labs/solidcraft#3708 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#3713 | not geometry (importer coverage, progress UI, export, timing tests or feature request) |
| tangency-labs/solidcraft#3720 | performance only (viewport lag with a 1,163-body assembly) |
| tangency-labs/solidcraft#3754 | document/file format or storage, not geometry |
| tangency-labs/solidcraft#3784 | CI goldens differing on Windows, not an import geometry case |
| tangency-labs/solidcraft#3847 | other area: tessellation (display plans for threads and pointed ends of STEP parts) |
| tangency-labs/solidcraft#3849 | other area: tessellation (display plans for STEP threads and pointed ends) |
| tangency-labs/solidcraft#3858 | 3MF import naming, not STEP/IGES geometry |
| tangency-labs/solidcraft#3859 | 3MF import naming, not STEP/IGES geometry |
| tangency-labs/solidcraft#3924 | AP242 tessellated parts as mesh bodies: a feature with no graded geometry, and the TRIANGULATED_SURFACE_SET entity layout could not be written reliably from the specification here; needs the tangency-labs/models file |
| tangency-labs/solidcraft#3925 | AP242 tessellated parts as mesh bodies: same as #3924 |
| tangency-labs/solidcraft#3974 | refactor PR (STEP geometry as plain data), no behaviour change to grade |
| tangency-labs/solidcraft#4007 | export-only: writer nondeterminism for a revolved horn torus; the reading side would need the collapsed-pole spline of the written file |
| tangency-labs/solidcraft#4021 | performance only (display plans and model cache for large assemblies) |
| tangency-labs/solidcraft#4086 | STEP-import file too large: size limit, no geometry |
| tangency-labs/solidcraft#4100 | component/joint bookkeeping after deleting an inserted STEP, not geometry |
| tangency-labs/solidcraft#4130 | STL opening error with only a screenshot; no file |
sheet-metal
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#30 | profile picks by index, not geometry |
| tangency-labs/solidcraft#40 | sketch projection ids, not geometry |
| tangency-labs/solidcraft#50 | UI only, no geometry (viewport highlight) |
| tangency-labs/solidcraft#59 | the hem's default side is the owner's decision (the oracle case 73-sm-hem fixes it inward); no right answer to grade |
| tangency-labs/solidcraft#117 | profile picks by curves, not geometry |
| tangency-labs/solidcraft#118 | other area: booleans (error messages of a failed boolean) |
| tangency-labs/solidcraft#271 | docs wording only |
| tangency-labs/solidcraft#286 | docs wording only |
| tangency-labs/solidcraft#299 | docs wording only |
| tangency-labs/solidcraft#390 | other area: booleans (a draft on a flange end face) |
| tangency-labs/solidcraft#391 | other area: booleans (a text deboss cut on a filleted and shelled body: boolean Cut, no result) |
| tangency-labs/solidcraft#470 | sketch attachment to a sheet panel, not geometry |
| tangency-labs/solidcraft#474 | sketch attachment to a sheet panel, not geometry |
| tangency-labs/solidcraft#482 | file format note, no geometry |
| tangency-labs/solidcraft#495 | sketch attachment to thickness faces, not geometry |
| tangency-labs/solidcraft#533 | assemblies: inserting a design as a linked component, not geometry |
| tangency-labs/solidcraft#534 | assemblies: an ignored regression test for #533, not geometry |
| tangency-labs/solidcraft#535 | face naming, no geometry |
| tangency-labs/solidcraft#539 | face naming (an ignored regression test), no geometry |
| tangency-labs/solidcraft#566 | other area: shell (a swept bar and sheet metal parts refused by shell) |
| tangency-labs/solidcraft#602 | other area: threads (threads on objects, crash) |
| tangency-labs/solidcraft#607 | the bend table and bend lines after cut-outs: bend table values are not a graded quantity of the rig |
| tangency-labs/solidcraft#622 | UI only, the agent cursor's menus |
| tangency-labs/solidcraft#677 | face attachments of sheet metal features, not geometry |
| tangency-labs/solidcraft#700 | file format and naming, no geometry |
| tangency-labs/solidcraft#732 | perforation: the hole count follows the layout (staggered or square, margins), which has no closed form; the cut budget part is graded in 529-a-hundred-slots-and-four-folds |
| tangency-labs/solidcraft#758 | feature specification for surface.offset, no failing geometry |
| tangency-labs/solidcraft#888 | docs wording only |
| tangency-labs/solidcraft#889 | docs wording only |
| tangency-labs/solidcraft#893 | docs wording only |
| tangency-labs/solidcraft#894 | docs wording only |
| tangency-labs/solidcraft#956 | other area: sweeps (loft vertex pairing) |
| tangency-labs/solidcraft#982 | test infrastructure (offline web test) |
| tangency-labs/solidcraft#1041 | perforation field: the hole count follows the layout (margins to the outline and bends), no closed form |
| tangency-labs/solidcraft#1089 | flat-pattern DXF output only, no solid geometry |
| tangency-labs/solidcraft#1231 | a user's design: only the refused selection is recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1251 | test infrastructure (feature walks) |
| tangency-labs/solidcraft#1284 | flat-pattern DXF output only, no solid geometry |
| tangency-labs/solidcraft#1324 | flat-pattern DXF output only, no solid geometry |
| tangency-labs/solidcraft#1325 | a user's design: only the refused selection is recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1326 | a user's design: only the refused selection is recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1391 | other area: booleans (a prism joined flush to a lofted tube's end face: Union: no result) |
| tangency-labs/solidcraft#1446 | other area: booleans (a text cut in one exact boolean) |
| tangency-labs/solidcraft#1475 | a user's design: only the refused selection is recorded, no geometry to rebuild |
| tangency-labs/solidcraft#1483 | UI only, no geometry |
| tangency-labs/solidcraft#1484 | UI only, no geometry |
| tangency-labs/solidcraft#1501 | parameter references of a mirror plane's origin, no failing geometry |
| tangency-labs/solidcraft#1556 | other area: booleans (the retry for #1391) |
| tangency-labs/solidcraft#1603 | a user's design: only the refused selection is recorded, no geometry to rebuild (a folded drip tray edited through its parameters) |
| tangency-labs/solidcraft#1683 | parameter references of hole positions, no failing geometry |
| tangency-labs/solidcraft#1851 | robustness goldens, test infrastructure |
| tangency-labs/solidcraft#1929 | robustness goldens, test infrastructure |
| tangency-labs/solidcraft#2009 | no repro that fixes a right answer: screenshots of an extrude joined to a flange and a chamfer; the flat pattern part is the refusal in #3324 |
| tangency-labs/solidcraft#2272 | face naming, no geometry |
| tangency-labs/solidcraft#2275 | face naming, no geometry |
| tangency-labs/solidcraft#2286 | chat UI, no geometry |
| tangency-labs/solidcraft#2298 | chat backend, no geometry |
| tangency-labs/solidcraft#2399 | a user's design: only the refused selection is recorded, no geometry to rebuild (a small body joined at a sheet corner, then flanged) |
| tangency-labs/solidcraft#2409 | construction geometry references, not solid geometry |
| tangency-labs/solidcraft#2461 | auto-report with command parameters only (an extrude cut on a face of a sheet metal bracket refused for touching a bend); the bracket is not in the report and the refusal is the documented behaviour, no number to grade |
| tangency-labs/solidcraft#2621 | sketch dragging behaviour, no solid geometry |
| tangency-labs/solidcraft#2729 | feature request: per-segment flanges on one edge, no failing geometry |
| tangency-labs/solidcraft#2732 | feature wish list for flange parameters, no geometry |
| tangency-labs/solidcraft#2763 | UI only, no geometry |
| tangency-labs/solidcraft#2894 | other area: fillets (chamfers past the faces) |
| tangency-labs/solidcraft#2987 | user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade |
| tangency-labs/solidcraft#3154 | a user's design: only the refused selection is recorded, no geometry to rebuild |
| tangency-labs/solidcraft#3170 | feature request: overlapping corner joins (butt, partial or full overlap); nothing to compare against yet |
| tangency-labs/solidcraft#3187 | UI only, no geometry |
| tangency-labs/solidcraft#3188 | UI only, no geometry |
| tangency-labs/solidcraft#3370 | other area: fillets |
| tangency-labs/solidcraft#3397 | assembly joint drive, no geometry |
| tangency-labs/solidcraft#3439 | sketch dimensions, no solid geometry |
| tangency-labs/solidcraft#3472 | open pull request for the overlap corner join feature #3170; a feature, no failing geometry |
| tangency-labs/solidcraft#3500 | user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade (the report has no steps at all) |
| tangency-labs/solidcraft#3502 | user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade |
| tangency-labs/solidcraft#3516 | feature request: an edge flange extent defined by vertices or edges; no failing geometry |
| tangency-labs/solidcraft#3581 | sketch move, no solid geometry |
| tangency-labs/solidcraft#3680 | auto-report with command parameters only (a 5 mm drilled hole at one point of a sheet metal bracket, refused as unsupported 3D machining); no design, and holes in flat sheet are covered by 560 and 955 |
| tangency-labs/solidcraft#3719 | feature request for cables, not sheet metal geometry |
| tangency-labs/solidcraft#3722 | origin plane colours, UI only |
| tangency-labs/solidcraft#3819 | sketch pattern preview, UI only |
| tangency-labs/solidcraft#3908 | other area: fillets (chamfering the rims of a flange's holes; closed unmerged) |
| tangency-labs/solidcraft#3937 | UI only, no geometry |
| tangency-labs/solidcraft#3946 | UI only, no geometry |
| tangency-labs/solidcraft#4094 | feature request: a contour flange that joins an existing sheet; the chained edge flange workaround it describes already builds, so there is no failing geometry |
| tangency-labs/solidcraft#4096 | open draft for the contour flange request #4094; a feature, no failing geometry |
| tangency-labs/solidcraft#4100 | assembly bookkeeping when deleting an inserted STEP, no geometry |
| tangency-labs/solidcraft#4155 | user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade |
shell
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#142 | no concrete recipe: a general saddle/four-face corner construction request; its geometry is exercised by case 1494 |
| tangency-labs/solidcraft#209 | no geometry given (a screenshot and 'the shell removed everything'); needs the user's design |
| tangency-labs/solidcraft#1379 | needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal, so no wrong result is recorded |
| tangency-labs/solidcraft#1969 | needs the user's design (a sphere split into 6 faces picked by point); a closed hollow sphere is the same operation as case 4009 |
| tangency-labs/solidcraft#1996 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset of a snap-fit bottom face in an 8-body design) |
| tangency-labs/solidcraft#2259 | needs the eight-command script of #2258 (a shelled arched block, two cylinder cuts); neither it nor the arch dimensions are in the PR, and the failure hangs on 2e-6 mm vertex gaps that a re-guessed profile would not reproduce |
| tangency-labs/solidcraft#2421 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#2432 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#2445 | no body or recipe given (a screenshot only) |
| tangency-labs/solidcraft#2452 | no body or recipe given ('complex body' only) |
| tangency-labs/solidcraft#2478 | not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment), no wrong shape |
| tangency-labs/solidcraft#2480 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a revolved profile with a freeform face) |
| tangency-labs/solidcraft#2493 | not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment) |
| tangency-labs/solidcraft#2556 | empty report: no body, pick or error given |
| tangency-labs/solidcraft#2557 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 12 on an 8-body design) |
| tangency-labs/solidcraft#2745 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 11) |
| tangency-labs/solidcraft#2761 | other area: 2D sketch offset of text outlines (sketch.offset), not a solid operation |
| tangency-labs/solidcraft#2795 | not geometry: UI, the plane editor says 'select a plane first' when editing an offset plane |
| tangency-labs/solidcraft#2886 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#2905 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell .125 in on an 8-feature part) |
| tangency-labs/solidcraft#2917 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#2935 | empty report: no body, pick or error given |
| tangency-labs/solidcraft#2978 | not geometry: UI, the mouse position is offset from the buttons |
| tangency-labs/solidcraft#3000 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell direction both) |
| tangency-labs/solidcraft#3031 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#3074 | needs the user's design (2 bodies, the face pick is not resolved: 'select at least one face'); a pick-resolution defect, not a shape with a known answer |
| tangency-labs/solidcraft#3105 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two opposite faces of a box in a 2-body design; the pick missed the faces) |
| tangency-labs/solidcraft#3158 | empty report: no body, pick or error given |
| tangency-labs/solidcraft#3159 | other area: 2D sketch offset of a spline (sketch.offset), not a solid operation |
| tangency-labs/solidcraft#3161 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#3163 | empty report: no body, pick or error given |
| tangency-labs/solidcraft#3181 | empty report: no body, pick or error given |
| tangency-labs/solidcraft#3290 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset face on a 13-feature, 2-body design) |
| tangency-labs/solidcraft#3341 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#3346 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#3492 | not geometry: UI, 'select the curves to offset first' (sketch offset with an empty selection) |
| tangency-labs/solidcraft#3524 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a 3 mm shell of a body with 41 cylinder faces; the failure is in an internal boolean cut) |
| tangency-labs/solidcraft#3567 | not geometry: construction-plane editing, 'plane offsets nested too deeply' |
| tangency-labs/solidcraft#3574 | other area: 2D sketch offset of a spline (sketch.offset), not a solid operation |
| tangency-labs/solidcraft#3585 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred |
| tangency-labs/solidcraft#3603 | not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment) |
| tangency-labs/solidcraft#3621 | not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment) |
| tangency-labs/solidcraft#3672 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (surface.thicken of a 9-feature body) |
| tangency-labs/solidcraft#3721 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (filleted extruded box in a 2-body design) |
| tangency-labs/solidcraft#3742 | other area: 2D sketch offset (sketch.offset, 'collapses an arc'), not a solid operation |
| tangency-labs/solidcraft#3774 | not geometry: a feature request (clearance input on Combine cut) |
| tangency-labs/solidcraft#3795 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two faces, 4 mm; only a screenshot of the result) |
| tangency-labs/solidcraft#3828 | other area: 2D sketch offset of splines (sketch.offset), not a solid operation |
| tangency-labs/solidcraft#3933 | needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal |
| tangency-labs/solidcraft#4029 | not geometry: construction-plane attachment jumps to another face after editing the offset |
| tangency-labs/solidcraft#4052 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (0.1 mm shell of a chamfered and filleted part) |
| tangency-labs/solidcraft#4073 | empty report: no body, pick or error given |
| tangency-labs/solidcraft#4120 | needs the user's design (3-body design; the pick is not resolved: 'select at least one face') |
| tangency-labs/solidcraft#4144 | needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (three faces, 2 mm; move larger than the wall) |
sweeps
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#85 | not geometry: batch rollback and deleting a sketch removes its pipe (document history) |
| tangency-labs/solidcraft#171 | not geometry: the CLI panics when its stdout pipe is closed |
| tangency-labs/solidcraft#174 | not geometry: the fix for the closed stdout pipe panic (#171) |
| tangency-labs/solidcraft#407 | not geometry: component placement frames when an extrude or revolve uses a sketch of another component (assembly) |
| tangency-labs/solidcraft#442 | other area: booleans (inspect.interference misses a 0.36 mm3 overlap with a small rib) |
| tangency-labs/solidcraft#536 | not geometry: inspect.interference pruning for large body counts |
| tangency-labs/solidcraft#705 | UI: Extrude and Revolve leave the Profiles field empty when the last sketch is used |
| tangency-labs/solidcraft#709 | UI: unit labels in the primitive dialogs |
| tangency-labs/solidcraft#1099 | not geometry: startup crash on D3D12, tessellation pipeline fallback |
| tangency-labs/solidcraft#1213 | other area: fillets (a round or chamfer on the end circle of a bent lofted tube) |
| tangency-labs/solidcraft#1402 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (sweep join of six profiles; design not attached) |
| tangency-labs/solidcraft#1496 | other area: import (STEP export of shelled revolved bodies) |
| tangency-labs/solidcraft#1555 | not geometry: headless pictures on the GPU |
| tangency-labs/solidcraft#1775 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (loft cut of two sketches) |
| tangency-labs/solidcraft#1928 | other area: import (STEP export of revolved faces scaled across their axis) |
| tangency-labs/solidcraft#1967 | no repro: 'the Loft operation isn't working', no sections, no parameters, no design |
| tangency-labs/solidcraft#1981 | not geometry: joint sweep (driving an assembly joint), not a solid sweep |
| tangency-labs/solidcraft#1988 | UI: hidden bodies are joined by a loft join (visibility scoping of the join participants); the loft with explicit targets is held by case 271 |
| tangency-labs/solidcraft#2004 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve cut, "implausible result volume 298.2432") |
| tangency-labs/solidcraft#2216 | UI: an edge cannot be picked as a sweep path ("select the path first"); no geometry |
| tangency-labs/solidcraft#2242 | UI: the arc sweep value box covered the end-point pick (the sketch arc "sweep", not a solid sweep) |
| tangency-labs/solidcraft#2276 | not geometry: inspect.parameter_sweep checks a design over a parameter range (a design-check command, not a sweep feature) |
| tangency-labs/solidcraft#2333 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (a 5 degree symmetric revolve join to skin a hole in a cylinder; no dimensions) |
| tangency-labs/solidcraft#2350 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (crash while running a 5-section loft join named RainRidge; sketches not given) |
| tangency-labs/solidcraft#2442 | empty report: the sweep failure arrived with no content |
| tangency-labs/solidcraft#2486 | other area: shell (shelling revolved barrels; held by the shell rig) |
| tangency-labs/solidcraft#2515 | empty report: no body, no parameters, no geometry |
| tangency-labs/solidcraft#2576 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (loft join of two sketches) |
| tangency-labs/solidcraft#2656 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (sweep cut along an arc and a line) |
| tangency-labs/solidcraft#2673 | tessellation: artefacts on the arc of a revolved half pill seen in a screenshot, with no dimensions that fix the sketch (display is owned elsewhere) |
| tangency-labs/solidcraft#2747 | no geometry: "revolve does not work on a selected face of a cube" with no axis or dimensions; a face profile has no axis lying in its plane to revolve about |
| tangency-labs/solidcraft#2791 | other area: booleans (lens-profile cut into a revolved quarter sphere; the profile is not given in the report) |
| tangency-labs/solidcraft#2802 | UI: leave sketch mode when Extrude starts; no geometry |
| tangency-labs/solidcraft#2811 | other area: fillets (performance of filleting many rib roots) |
| tangency-labs/solidcraft#2815 | UI: the pull request finishing the sketch when Extrude or Revolve starts |
| tangency-labs/solidcraft#2816 | not reproduced and no geometry: a surface sweep that went the opposite way from the path; the sketches were not attached (the sweep starts at the path end nearest the profile) |
| tangency-labs/solidcraft#2883 | UI: the dialog was opened with no profiles picked ("select profiles of two or more sketches first"); working as designed |
| tangency-labs/solidcraft#2954 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (twisted annular sweep cut; the design was lost) |
| tangency-labs/solidcraft#2990 | other area: shell (shelling a loft; held by the shell rig as 3669-shell-lofted-square-frustum) |
| tangency-labs/solidcraft#2993 | not reproduced and no geometry: a circle swept along a fit-point spline follows the path on current builds; the design with the failing sketch placement was not attached |
| tangency-labs/solidcraft#3063 | UI: the dialog was opened with no sections picked; the reporter wants a spline loft that is not described |
| tangency-labs/solidcraft#3076 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join of three profiles against a body with 29 curved faces) |
| tangency-labs/solidcraft#3215 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (a 15-profile revolve cut that runs for minutes) |
| tangency-labs/solidcraft#3241 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join) |
| tangency-labs/solidcraft#3308 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (loft join of two sketches) |
| tangency-labs/solidcraft#3318 | other area: booleans (symmetric through-all lens cut on a revolved ring that shares its outline cylinder; the reproduction is an example file not given in the report) |
| tangency-labs/solidcraft#3433 | not geometry: GPU path tracer shader cache |
| tangency-labs/solidcraft#3545 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join) |
| tangency-labs/solidcraft#3635 | feature request: start and end conditions for extrude, hole and loft; no geometry |
| tangency-labs/solidcraft#3636 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (coil join, Union no result; the target body is not given and the pitch was typed with a decimal comma) |
| tangency-labs/solidcraft#3691 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (a 90 degree revolve joined to the bottom of a letter L; the design is only in an attached file) |
| tangency-labs/solidcraft#3697 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "unexpected result" with only a screenshot) |
| tangency-labs/solidcraft#3717 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result") |
| tangency-labs/solidcraft#3724 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result") |
| tangency-labs/solidcraft#3726 | UI: the dialog was opened with no sections picked ("select the sections, one sketch each first"); no geometry |
| tangency-labs/solidcraft#3752 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result") |
| tangency-labs/solidcraft#3781 | UI feature request: a target-body picker in the Extrude, Sweep and Revolve dialogs (the command already takes targets, held by the loft targets case 271) |
| tangency-labs/solidcraft#3790 | feature request: square and triangular pipe sections, no geometry to grade (the pipe takes a circular section only) |
| tangency-labs/solidcraft#3806 | other area: import (IGES surface of revolution of an arc read as a whole sphere; held by the import rig as 3806-iges-revolved-arc-spherical-cap-dome) |
| tangency-labs/solidcraft#3813 | other area: import (the fix for #3806, IGES revolved arc) |
| tangency-labs/solidcraft#3818 | other area: tessellation (hovering a long helical edge) |
| tangency-labs/solidcraft#3837 | not geometry: exploded view steps, easing and trail lines (assembly presentation) |
| tangency-labs/solidcraft#3840 | not geometry: the pull request for the exploded view steps (#3837) |
| tangency-labs/solidcraft#3880 | other area: import (STEP conformance regression sweep) |
| tangency-labs/solidcraft#3901 | other area: import (STEP conformance parts, cones to a point) |
| tangency-labs/solidcraft#3960 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result") |
| tangency-labs/solidcraft#3987 | other area: import (revolve, sweep and loft joined to a part nested in a STEP assembly) |
| tangency-labs/solidcraft#4005 | other area: import (STEP export writes a cylinder as a cone of semi-angle 8e-12; the revolve itself is right, and the import rig holds this as 4005-cylinder-written-as-near-zero-cone) |
| tangency-labs/solidcraft#4006 | other area: import (STEP export of a revolve written as a cone of semi-angle pi/2; the revolve itself is right, and the import rig holds this as 4006-plane-written-as-cone-of-nearly-right-angle) |
| tangency-labs/solidcraft#4037 | empty report: the loft failure arrived with no content |
| tangency-labs/solidcraft#4092 | reproduction JSON cut off in the source (the 50-command script stops mid-way, rib shapes not given in the text) |
| tangency-labs/solidcraft#4093 | reproduction script cut off in the source (a 3-turn guided thread sweep cut; the generator stops mid-way) and the run takes about 48 s, over the case budget |
| tangency-labs/solidcraft#4139 | no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result") |
tessellation
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#15 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#48 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#63 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#78 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#79 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#92 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#95 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#125 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#133 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#134 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#173 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#175 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#202 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#256 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#301 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#335 | other area: fillets |
| tangency-labs/solidcraft#346 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#352 | other area: sweeps (projection of faces split by hidden seams is a sketch-projection feature, not a mesh defect) |
| tangency-labs/solidcraft#358 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#472 | feature: Patch fills non-planar edge loops with one smooth face (#250); not a tessellation defect |
| tangency-labs/solidcraft#550 | other area: sheet-metal |
| tangency-labs/solidcraft#581 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#615 | other area: booleans (a mesh body is not a solid for a cut; the refusal is by design) |
| tangency-labs/solidcraft#620 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#623 | other area: booleans |
| tangency-labs/solidcraft#636 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#642 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#650 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#654 | other area: booleans |
| tangency-labs/solidcraft#658 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#667 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#673 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#706 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#714 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#720 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#742 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#744 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#756 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#762 | feature: surface.ruled strips off an edge chain, no defect |
| tangency-labs/solidcraft#766 | feature: surface.unstitch and surface.reverse_normal commands, no defect |
| tangency-labs/solidcraft#775 | other area: fillets |
| tangency-labs/solidcraft#796 | other area: fillets |
| tangency-labs/solidcraft#797 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#800 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#802 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#803 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#805 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#806 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#813 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#829 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#837 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#842 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#849 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#856 | implements the unstitch and reverse-normal commands of #766; a feature, not a defect |
| tangency-labs/solidcraft#870 | re-records a robustness golden after the tessellation plans; no geometry of its own |
| tangency-labs/solidcraft#878 | a Windows-only robustness golden (seed 0) differing during render integration; no geometry of its own |
| tangency-labs/solidcraft#900 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#906 | other area: fillets |
| tangency-labs/solidcraft#914 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#916 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#917 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#936 | other area: fillets |
| tangency-labs/solidcraft#940 | re-records robustness goldens after the body mesh moved back to the reference mesher; no recipe of its own |
| tangency-labs/solidcraft#961 | other area: booleans |
| tangency-labs/solidcraft#974 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#983 | GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right |
| tangency-labs/solidcraft#1003 | other area: booleans |
| tangency-labs/solidcraft#1004 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1012 | GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right |
| tangency-labs/solidcraft#1019 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1022 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1038 | performance only: a small hole takes 7.5 s while meshing its intersection edges; no wrong geometry |
| tangency-labs/solidcraft#1046 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1087 | diagnostic feature: sampled G0/G1/G2 seam reports; no defect |
| tangency-labs/solidcraft#1098 | GPU startup crash: the tessellation shader fails to compile on D3D12 with FXC |
| tangency-labs/solidcraft#1099 | GPU startup crash fix: CPU fallback for the tessellation pipeline |
| tangency-labs/solidcraft#1113 | other area: fillets |
| tangency-labs/solidcraft#1142 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1152 | other area: import |
| tangency-labs/solidcraft#1157 | the fix for #882 (one unmeshed fillet strip of an owner's design): no small synthetic recipe with a closed-form answer |
| tangency-labs/solidcraft#1163 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#1200 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#1213 | other area: fillets |
| tangency-labs/solidcraft#1218 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1223 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1237 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1252 | other area: crashes |
| tangency-labs/solidcraft#1259 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#1267 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1272 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1287 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#1289 | other area: threads |
| tangency-labs/solidcraft#1291 | other area: fillets |
| tangency-labs/solidcraft#1300 | other area: threads |
| tangency-labs/solidcraft#1307 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#1309 | performance only: point-in-trim tests skip runs of segments; same meshes as before |
| tangency-labs/solidcraft#1313 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1319 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#1320 | display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected |
| tangency-labs/solidcraft#1327 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1332 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1339 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1345 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1346 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1348 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#1358 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1364 | other area: booleans |
| tangency-labs/solidcraft#1368 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1374 | other area: import |
| tangency-labs/solidcraft#1385 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1400 | other area: import |
| tangency-labs/solidcraft#1425 | display-quality refinement as you zoom (viewport only); the kernel's B-rep and measured mesh are not affected |
| tangency-labs/solidcraft#1434 | GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right |
| tangency-labs/solidcraft#1442 | report with no description, only a screenshot of an unnamed part: nothing to rebuild |
| tangency-labs/solidcraft#1454 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1455 | other area: booleans |
| tangency-labs/solidcraft#1459 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1460 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1461 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1462 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1464 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1468 | other area: import |
| tangency-labs/solidcraft#1477 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1492 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1493 | other area: import |
| tangency-labs/solidcraft#1494 | other area: shell |
| tangency-labs/solidcraft#1512 | other area: import |
| tangency-labs/solidcraft#1553 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1579 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1605 | other area: import |
| tangency-labs/solidcraft#1640 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1651 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1652 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1654 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1655 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1656 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1658 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1677 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1693 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1694 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1695 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1696 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1698 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1699 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1700 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1721 | other area: import |
| tangency-labs/solidcraft#1722 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1723 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1724 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1726 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#1739 | GPU depth fighting between the origin gizmo and a face (fixed by #1768); no B-rep cause |
| tangency-labs/solidcraft#1742 | other area: import |
| tangency-labs/solidcraft#1743 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1768 | GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right |
| tangency-labs/solidcraft#1773 | GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right |
| tangency-labs/solidcraft#1776 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#1799 | other area: sheet-metal |
| tangency-labs/solidcraft#1812 | empty description; it only edits the boolean property-test harness, no geometry stated |
| tangency-labs/solidcraft#1902 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1907 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1910 | other area: booleans |
| tangency-labs/solidcraft#1912 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1978 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#1983 | other area: booleans |
| tangency-labs/solidcraft#2015 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2034 | other area: booleans |
| tangency-labs/solidcraft#2054 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2056 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2057 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2067 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#2086 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2095 | timing of a thread's faceted cut in a kernel profile; no geometry defect |
| tangency-labs/solidcraft#2102 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2115 | other area: threads |
| tangency-labs/solidcraft#2130 | GPU/UI only: the face hover highlight flickers while panning on a touchpad |
| tangency-labs/solidcraft#2134 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2153 | GPU display only: zebra analysis flickers on horizontal faces of a bolted flange while the camera rotates; the B-rep is a plain extruded and patterned flange |
| tangency-labs/solidcraft#2156 | other area: booleans |
| tangency-labs/solidcraft#2191 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#2235 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#2325 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2367 | other area: threads |
| tangency-labs/solidcraft#2450 | display only: Section Analysis draws a white line along the edge of a circular-pattern of a revolve; the report has no revolve profile or section plane, and the solid itself is not claimed wrong |
| tangency-labs/solidcraft#2482 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#2487 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2488 | other area: fillets |
| tangency-labs/solidcraft#2508 | other area: import |
| tangency-labs/solidcraft#2513 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2526 | other area: threads |
| tangency-labs/solidcraft#2560 | UI only: the Save as Mesh button stays disabled until bodies are selected |
| tangency-labs/solidcraft#2568 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2603 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2662 | test-coverage audit of mutants in the tessellator; no geometry defect |
| tangency-labs/solidcraft#2675 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2698 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#2769 | feature request: an option to export a finer STL (the Save as Mesh dialog has no tolerance); not a defect |
| tangency-labs/solidcraft#2780 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2809 | other area: import |
| tangency-labs/solidcraft#2811 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#2846 | feature request: a chord-tolerance option for Save as Mesh; the default export is not wrong geometry |
| tangency-labs/solidcraft#2865 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#2867 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#2868 | other area: threads |
| tangency-labs/solidcraft#2880 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#2895 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#2922 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#2924 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#2947 | other area: booleans |
| tangency-labs/solidcraft#2948 | other area: booleans |
| tangency-labs/solidcraft#3001 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#3012 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#3020 | other area: booleans |
| tangency-labs/solidcraft#3047 | other area: import |
| tangency-labs/solidcraft#3059 | GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right |
| tangency-labs/solidcraft#3071 | mesher unit case on a hand-built rational B-spline patch; no command builds that face (it came from an imported purchased part), so no synthetic recipe shows the self-crossing sliver |
| tangency-labs/solidcraft#3072 | the fix for #3071 (self-crossing sliver face): no command-level repro, see #3071 |
| tangency-labs/solidcraft#3127 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#3142 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3178 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#3207 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#3208 | other area: import |
| tangency-labs/solidcraft#3249 | not a tessellation defect: inspect.interference/clearance skip mesh bodies (feature gap for imported mesh bodies) |
| tangency-labs/solidcraft#3258 | not a tessellation defect: lists mesh bodies as unchecked in inspect.interference/clearance |
| tangency-labs/solidcraft#3311 | other area: threads |
| tangency-labs/solidcraft#3368 | other area: booleans |
| tangency-labs/solidcraft#3369 | other area: fillets |
| tangency-labs/solidcraft#3370 | other area: fillets |
| tangency-labs/solidcraft#3400 | other area: fillets |
| tangency-labs/solidcraft#3410 | other area: booleans |
| tangency-labs/solidcraft#3437 | other area: fillets |
| tangency-labs/solidcraft#3480 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3503 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3504 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3528 | other area: booleans |
| tangency-labs/solidcraft#3616 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3699 | UI only: the extrude preview direction |
| tangency-labs/solidcraft#3700 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#3712 | adds chord tolerance and facet angle options to Save as Mesh; no geometry defect |
| tangency-labs/solidcraft#3722 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3755 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3847 | other area: threads |
| tangency-labs/solidcraft#3849 | other area: threads |
| tangency-labs/solidcraft#3873 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#3899 | other area: crashes (a non-affine matrix reaches only the kernel's transform_matrix API; no command passes a matrix and solid.scale already refuses a zero factor, so no recipe reaches it) |
| tangency-labs/solidcraft#3906 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#3922 | other area: fillets |
| tangency-labs/solidcraft#3924 | other area: import |
| tangency-labs/solidcraft#3925 | other area: import |
| tangency-labs/solidcraft#3942 | other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact) |
| tangency-labs/solidcraft#3981 | performance or caching only: no wrong geometry, nothing graded by shape |
| tangency-labs/solidcraft#4021 | other area: import |
| tangency-labs/solidcraft#4105 | UI only: no geometry or mesh in the report |
| tangency-labs/solidcraft#4127 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
| tangency-labs/solidcraft#4154 | rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry |
threads
| Source | Why skipped |
|---|---|
| tangency-labs/solidcraft#287 | performance umbrella: multithreading, SIMD, caching; nothing to grade |
| tangency-labs/solidcraft#424 | Insert Part bolts carry cosmetic threads by design (the comment asks for a modelled option); no geometry defect |
| tangency-labs/solidcraft#519 | feature request: a thread as 1 to 3 faces so it can be offset; no closed-form face count to grade |
| tangency-labs/solidcraft#524 | design preference (thread adds material instead of cutting into the part) and a groove-end convention at shoulders with no derivable number; the hole-too-wide fill it was linked to is case 1443-m5x0.7-thread-in-5mm-hole |
| tangency-labs/solidcraft#873 | other area: booleans (a hexagon join beside a screw: 'join cannot preserve the original faces'; no thread involved) |
| tangency-labs/solidcraft#987 | auto-report with a fillet's four edge picks and a screenshot only ('a ghost in the thread creation'): no design, no thread parameters, nothing to rebuild or compute |
| tangency-labs/solidcraft#1020 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#1024 | test-process memory corruption on Windows in the thread tests, not a geometry result with a right answer |
| tangency-labs/solidcraft#1201 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#1289 | other area: tessellation (imported STEP threads displayed with artifacts; the B-rep was fine) |
| tangency-labs/solidcraft#1300 | other area: tessellation (display of imported modelled threads) |
| tangency-labs/solidcraft#1524 | assembly joints (gear, rack and screw couplings between motions): no kernel geometry |
| tangency-labs/solidcraft#1527 | other area: booleans (last-resort nudge of a pleat loft join; not a thread) |
| tangency-labs/solidcraft#1675 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#1731 | no repro geometry: 'planar boolean: shell not oriented and closed' with only a face point; the family of case 3311-two-tapped-holes-both-modelled-threaded |
| tangency-labs/solidcraft#1759 | UI only: the Thread dialog's size suggestion |
| tangency-labs/solidcraft#1794 | no repro geometry: 'no cylindrical face there to thread' with only a face point of a private design; the family of case 2038-internal-then-external-thread-on-one-body |
| tangency-labs/solidcraft#2079 | tracker for modelled threads; the geometry is in cases 2038-* and 2526-* |
| tangency-labs/solidcraft#2095 | performance: kernel profile timings of a thread's faceted cut |
| tangency-labs/solidcraft#2243 | other area: import (STEP export read-back hangs meshing a seam cylinder hole) |
| tangency-labs/solidcraft#2264 | UI only: modelled-thread preview in the dialog |
| tangency-labs/solidcraft#2265 | UI only: reopening a Thread feature lost its face selection |
| tangency-labs/solidcraft#2451 | other area: crashes (a crash report with only a face point, no design) |
| tangency-labs/solidcraft#2467 | window-thread / UI responsiveness, not modelled threads: no geometry |
| tangency-labs/solidcraft#2468 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#2470 | other area: crashes (a crash report with only a face point, no design) |
| tangency-labs/solidcraft#2679 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#2796 | other area: crashes (a crash report with only a face point, no design) |
| tangency-labs/solidcraft#2868 | UI only: cosmetic thread markings as a display preference |
| tangency-labs/solidcraft#2892 | no repro geometry: 'planar boolean: tree too deep' for an M22x2.5 modelled thread, with only a face point |
| tangency-labs/solidcraft#2908 | test flakiness of the off-window-thread tests: not geometry |
| tangency-labs/solidcraft#2929 | test flakiness of the off-window-thread tests: not geometry |
| tangency-labs/solidcraft#3110 | not kernel geometry: the automatic-size lookup refuses a 78 mm shaft (no standard size); a cosmetic thread leaves the model unchanged |
| tangency-labs/solidcraft#3130 | auto-report with command parameters only (an M5 drilled hole at a point the comment reads as off the part): no design; a drilled M5 hole in a block works, so there is no geometry to grade |
| tangency-labs/solidcraft#3131 | no repro geometry: 'the face is too far from the thread's diameter' with only a face point; the family of case 2369 |
| tangency-labs/solidcraft#3133 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#3135 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#3145 | feature request: threads without turning the whole body into facets; no number to grade (the multi-thread case 2526-three-modelled-threads-in-one-body covers the symptom) |
| tangency-labs/solidcraft#3165 | empty report (the body was not pasted) |
| tangency-labs/solidcraft#3183 | no repro geometry: 'planar boolean: tree too deep' redefining a thread after a fillet; sizes of the private design unknown |
| tangency-labs/solidcraft#3307 | no repro: a hole with a thread size is a cosmetic thread by default (see case 2115-tapped-hole-drill-is-major-minus-pitch) |
| tangency-labs/solidcraft#3337 | no repro geometry: 'planar boolean: shell not oriented and closed' with only a face point; the same family as case 3311-two-tapped-holes-both-modelled-threaded |
| tangency-labs/solidcraft#3340 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#3386 | other area: crashes (a crash report with only a face point, no design) |
| tangency-labs/solidcraft#3467 | no repro geometry: 'planar boolean: shell not oriented and closed' with only the face point of a private design; the same family as case 3311-two-tapped-holes-both-modelled-threaded |
| tangency-labs/solidcraft#3519 | UI only: the Thread dialog was applied with no cylindrical face selected |
| tangency-labs/solidcraft#3609 | CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry |
| tangency-labs/solidcraft#3622 | test flakiness: not geometry |
| tangency-labs/solidcraft#3710 | no repro geometry: the report has only the face point of a private design (an app that stopped responding) |
| tangency-labs/solidcraft#3737 | UI only: orbit and zoom freeze in edge highlighting on the main thread |
| tangency-labs/solidcraft#3738 | UI and data: tapped-hole catalogue of metric fine, UNC and UNF sizes with tabulated pilot drills; no closed form |
| tangency-labs/solidcraft#3745 | UI only: hover highlight of a large thread computed on the main thread |
| tangency-labs/solidcraft#3824 | auto-report with command parameters only (an M5 drilled hole from sketch point 8, failing 'no cylindrical face there to thread'): the sketch's face is not in the report, and a drilled M5 hole from a point on a flat block face works |
| tangency-labs/solidcraft#3847 | other area: tessellation (display plans for threads and pointed ends of imported STEP bodies) |
| tangency-labs/solidcraft#3849 | other area: tessellation (display plans for STEP threads and pointed ends) |
| tangency-labs/solidcraft#3870 | other area: tessellation (hover and select a thread as one piece: display and picking groups) |
| tangency-labs/solidcraft#4033 | visual only: the thread's facets look faceted; the report has no design, only a face point |
| tangency-labs/solidcraft#4085 | no new geometry: M6 on a 7 mm shaft is a shaft thicker than the thread, the family of case 2705 |
| tangency-labs/solidcraft#4087 | feature request: the thread as a few selectable faces rather than many facets; no closed-form face count, no number to grade |
| tangency-labs/solidcraft#4093 | other area: sweeps (a guided helical sweep cut whose exported mesh has open boundaries; not the Thread feature) |