solvecraft/docs/kernel-cases.md

Kernel regression rig

Generated by cargo xtask kernel-cases. Every geometry case the old kernel (truck) got wrong, as an issue, a PR or a crash report recorded it, is a use case in tests/kernel-cases/ with its own right answer: numbers from analysis or a hand calculation (analytic) where the geometry has them, and otherwise the invariants (invariants): the operation succeeds, or refuses cleanly where that is the right answer; each body is one closed shell that passes the record's structure and geometry checks and SMLib's own check; the expected face, edge and vertex counts. Never a kernel's output, and never a commercial kernel's.

The cases run on SMLib, SolidCraft's kernel. A failing case stays failing until the kernel is fixed; there is no workaround on SolidCraft's side. A failed SMLib call leaves its inputs for replay in the run's output folder (target/kernel-cases/dumps/<area>-<case>/). See tests/kernel-cases/README.md for the format.

Coverage

Area	Cases	Results
booleans	89	14 fail, 1 hang, 73 pass, 1 unsupported
crashes	10	3 fail, 1 hang, 6 pass
fillets	50	6 fail, 41 pass, 3 unsupported
import	23	1 fail, 22 pass
sheet-metal	57	4 fail, 1 hang, 52 pass
shell	18	5 fail, 13 pass
sweeps	83	1 crash, 7 fail, 1 hang, 74 pass
tessellation	14	1 fail, 13 pass
threads	28	3 fail, 2 hang, 23 pass

372 cases from 473 sources; answers: 324 analytic, 48 invariants.

Results

Case	Sources	What went wrong	Answer	Result
booleans/1107-join-hollow-hub-with-nine-blades	tangency-labs/solidcraft#1107	a hollow hub (tube r 21.5..23) joined with nine disjoint blades whose roots lie wholly in the wall: one valid solid, the cavity stays the hub's. Blades here are r1 round bars (the report's are lofted fan blades)	analytic	pass
booleans/114-extrude-join-on-curved-body-coincident-wall	tangency-labs/solidcraft#114	extruding a profile onto a cylinder with zero taper: the new wall is the old wall continued (coincident cylindrical faces), join failed	analytic	pass
booleans/1140-hollow-lofted-tube-cut-in-half-and-joined	tangency-labs/solidcraft#1140	a spiral round tube (radius growing 76 to 210 mm over one turn, 12 mm wall) built as 8 lofted bands, each minus a lofted bore, cut in half through the axis plane z=0 and the halves joined: must give one body	invariants	pass
booleans/1195-text-cut-into-plate	tangency-labs/solidcraft#1195	text cut into a plate: a boundary curve's end meeting a point whatever its parameter (glyph outlines through a text cut)	invariants	pass
booleans/1279-cut-with-tool-cylinder-coaxial-with-hole	tangency-labs/solidcraft#1279	a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result'	analytic	FAIL: step 4 (solid.cylinder): SMLib boolean: SMLib's check refuses the result: 6 failed tests: SmFace::Test #33 Face has Coincident Edges: Face has Coincident Edges.
booleans/13-split-body-by-a-plane	tangency-labs/solidcraft#13	split a body by a plane (the split-by-a-face path tripped a debug assertion, 'Two same vertices cannot construct an edge')	analytic	pass
booleans/1355-concentric-hole-through-drilled-recess	tangency-labs/solidcraft#1355 tangency-labs/solidcraft#1736	a drilled O8.5 recess (118 deg drill point) in a plate, then a O4 hole through its centre: the second cut 'does not work'	analytic	pass
booleans/1647-box-cylinder-general-intersect	tangency-labs/solidcraft#1647	a box and a cylinder in general position (nothing coincident or tangent): Intersect refused as an implausible volume	analytic	pass
booleans/1649-crossing-cylinders-union-far-from-origin	tangency-labs/solidcraft#1649	union of two crossing cylinders, both moved (1000,-700,300) mm: volume lost with position	analytic	pass
booleans/168-rim-touching-coin-along-a-circle-only	tangency-labs/solidcraft#168	a rim on a coin's top face that meets the coin along one circle only (no shared area, no shared volume): it must not be joined into it	analytic	FAIL: shells Coin: 2 (want 1); body_count 1 (want 2)
booleans/1717-two-overlapping-sphere-cuts	tangency-labs/solidcraft#1717 tangency-labs/solidcraft#2158	a second sphere cut overlapping an earlier sphere cut on a box edge: 'no result'	analytic	pass
booleans/1730-cut-short-of-far-face-keeps-skin	tangency-labs/solidcraft#1730	an extrude cut whose profile stops 0.25 mm short of a wall's far face must leave that skin (it was grown through)	analytic	pass
booleans/1858-shallow-cuts-after-earlier-pocket	tangency-labs/solidcraft#1765 tangency-labs/solidcraft#1858	two 1.5 mm circular cuts overlapping an earlier 0.75 mm pocket (timeline roll-back, insert, redefine): the cut came out empty	analytic	pass
booleans/1865-tube-and-sector-meeting-along-cylinder-walls	tangency-labs/solidcraft#1865 tangency-labs/solidcraft#1910 tangency-labs/solidcraft#1983 tangency-labs/solidcraft#2034	a union of two solids that meet along cylindrical faces: a tube (r10..12, z 0..20) and a 90 deg ring sector (same radii, z 10..30) whose curved faces are the tube's own, overlapping it axially; refused ('planar faces only') or, by the faceted fallback, left 1710 faceted faces	analytic	pass
booleans/1910-coaxial-cylinders-intersect	tangency-labs/solidcraft#1910 tangency-labs/solidcraft#1865	intersection of two cylinders of one radius on one axis (z 0..30 and 22..46) whose round sides lie in each other over the shared 8 mm	analytic	pass
booleans/1927-delete-pocket-face-restores-plate	tangency-labs/solidcraft#1927	Delete Face on the 0.5 mm deep O15 recess of a plate: the face around the gap must keep its surface	analytic	pass
booleans/1949-extrude-side-drawn-in-collinear-pieces	tangency-labs/solidcraft#1949	a profile side drawn as two collinear lines extrudes into one flat face, not two with an edge between them	analytic	pass
booleans/1949-tapered-extrude-side-in-collinear-pieces	tangency-labs/solidcraft#1949	with a taper too, a side drawn in two collinear pieces is one face	analytic	pass
booleans/1984-near-coaxial-pin-overlaps-bore-wall	tangency-labs/solidcraft#1984	the overlap of a pin 0.00056 mm off the axis of a bore of its own radius (r=3, 9.65 long): a thin crescent. The report's STEP round trip is left out; this is the geometry	analytic	pass
booleans/1984-rivet-with-flush-heads-a-hair-off-its-hole	tangency-labs/solidcraft#1984	a rivet (shank r=2, heads r=4 flat on both faces of a 1.5 mm sheet) 0.004 mm off the axis of its hole: overlap with the sheet is the shank's crescent; the heads touch the sheet faces over an area but add no volume	analytic	pass
booleans/2003-mirror-feature-join-flush-with-mirror-plane	tangency-labs/solidcraft#2003	mirror a feature with Join: the image meets its original along the mirror plane and the join was refused for its volume	analytic	pass
booleans/2008-coaxial-cylinders-join-one-wall	tangency-labs/solidcraft#2008 tangency-labs/solidcraft#1986	a join of coaxial cylinders of one radius whose walls overlap leaves one cylindrical wall in one face (it came out as a stack of faces, so a later chamfer on its top edge refused)	analytic	pass
booleans/2055-countersink-holes-from-several-sketch-points	tangency-labs/solidcraft#2055	a countersunk hole at two sketch points at once, in a design with several bodies: 'there is no body to cut or intersect' (one point works)	analytic	pass
booleans/2076-rectangular-pattern-of-cylinder-join	tangency-labs/solidcraft#2076	a rectangular pattern of a cylinder join (pin-fin plate) scales quadratically in time	analytic	pass
booleans/2464-extrude-join-leaves-hidden-body-alone	tangency-labs/solidcraft#2464 tangency-labs/solidcraft#2465	an Extrude Join onto a plate with a hidden coincident copy: the hidden body must not be joined in	analytic	pass
booleans/2524-circular-pattern-of-bore-cut	tangency-labs/solidcraft#2524	a circular pattern (count 2, 360 deg, about Y) of a cut made off-axis: 'boolean Cut: no result'	analytic	pass
booleans/2564-joined-side-run-wrapping-past-loop-start	tangency-labs/solidcraft#2564 tangency-labs/solidcraft#1949	an extrude of an outline whose bottom side is drawn as two collinear pieces that wrap past the loop's first segment ((10,0)->(20,0) ... (0,0)->(10,0)): the bottom is one face	analytic	pass
booleans/2580-clip-round-small-hole-of-long-plate	tangency-labs/solidcraft#2580 tangency-labs/solidcraft#2579	a 16 mm box cut out round a small (r 1.8) hole of a 3 m long, 2 mm plate keeps the hole in both faces	analytic	pass
booleans/2583-taper-side-drawn-in-collinear-pieces	tangency-labs/solidcraft#2583	a tapered extrude of a 20x10 rectangle whose bottom side is drawn as two collinear pieces: the sloped side is one face	analytic	pass
booleans/2601-taper-with-start-offset	tangency-labs/solidcraft#2601	a tapered extrude whose start is offset along the sketch normal (the app says: not supported yet: taper with two-sided, symmetric or offset extents)	analytic	pass
booleans/2754-taper-extrude-line-arc-corner	tangency-labs/solidcraft#2754	a tapered extrude of a profile in which an arc meets a line at a corner (a half disc)	analytic	pass
booleans/2755-mirror-copy-keeps-seed-targets	tangency-labs/solidcraft#2755	the mirror copy of a primitive cut changes only the seed's targets, not a body the seed was told to leave alone	analytic	pass
booleans/2755-pattern-copies-keep-seed-targets	tangency-labs/solidcraft#2755	copies of a primitive cut made with a rectangular pattern change only the seed's targets, not a body the seed was told to leave alone	analytic	pass
booleans/2801-prism-edge-in-round-cornered-slab-end-face	tangency-labs/solidcraft#2801	a join of a triangular prism and a thin slab with rounded corners (r 4.9) that share their bottom plane, the prism's edge in that plane lying in the slab's end face	analytic	pass
booleans/2810-taper-extrude-arcs-meeting-at-corners	tangency-labs/solidcraft#2810 tangency-labs/solidcraft#2813	a tapered extrude of a loop of arcs on three circles meeting at sharp corners (a circle with a lobe on each side); the walls must meet at the corners	analytic	pass
booleans/2826-cut-up-to-face-leaves-no-skin	tangency-labs/solidcraft#2826 tangency-labs/solidcraft#2827	a cut that ends exactly in a face of its target (the plate's top face) must open the hole, not leave a zero-thickness skin over it	analytic	pass
booleans/2896-join-arm-end-into-ring-wall	tangency-labs/solidcraft#2896	a join of a ring (R30/R24, 6 tall) and an arm with a convex R5 end whose tip runs 0.1 mm into the ring's outer wall (curved faces that nearly graze)	analytic	pass
booleans/2896-join-arm-end-near-ring-wall-gap	tangency-labs/solidcraft#2896	a join of a ring and an arm whose R5 convex tip stops 0.01 mm short of the ring's outer wall: nothing overlaps, so nothing fuses	analytic	pass
booleans/2904-countersunk-hole-with-distant-body	tangency-labs/solidcraft#2904	a countersunk hole in a small plate, near a rounded corner, while an unrelated body sits 120 mm away: only the plate may change, and the countersink must be complete	analytic	pass
booleans/2928-join-cap-touching-lips-with-offset-walls	tangency-labs/solidcraft#2928	two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction	analytic	FAIL: volume_mm3 1066.022935 (want 769.468975)
booleans/3027-pin-seated-line-to-line-in-bore	tangency-labs/solidcraft#3027	a pin (r4) seated line to line in a bore (r4, exactly coaxial) of a bush: the two cylinder walls coincide	analytic	pass
booleans/307-tangent-hole-contacts-ring-against-grid	tangency-labs/solidcraft#307	four pairs of through holes whose circles touch at exactly one point (ring holes at (+-25,0),(0,+-25) against grid holes at (+-15,0),(0,+-15)); the symmetric contacts must be treated alike and split no cylinder face	analytic	FAIL: measure Plate: the operation failed: not supported yet: tessellation: face 0 (plane): triangulation does not (want measurable); body_count 0 (want 1); faces 0 (want 14); volume_mm3 0 (want 46858.407346)
booleans/308-blind-cut-ending-inside-a-cylinder	tangency-labs/solidcraft#308	a hinge leaf (40x30x3) with a joined r4 knuckle cylinder along X and a O4 pin hole, then a 3.3 mm blind cut of x 12..28, y 29..40 ending inside the cylinder: the result grew a sphere and a freeform face	analytic	pass
booleans/3092-ring-on-perforated-plate	tangency-labs/solidcraft#3092 tangency-labs/solidcraft#2844	a ring (r 19.6/20.8, 20 tall) joined onto the top of an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes: the ring's foot crosses many hole edges	analytic	FAIL: measure Plate: the operation failed: not supported yet: tessellation: face 1 (plane): triangulation does not (want measurable); body_count 0 (want 1); volume_mm3 0 (want 6744.776237)
booleans/3175-cut-beside-sealed-void	tangency-labs/solidcraft#3175	a cut over the bottom edge of a revolved cylinder that holds a sealed spherical void on its axis: the body must not come out empty or refused	analytic	pass
booleans/3243-rim-and-rounded-tooth-join	tangency-labs/solidcraft#3243	a join of a cylindrical rim (r 15.27..16.65, to z=5) and a rounded tooth trimmed to the same two cylinders that overlaps it by 0.01 mm in Z	invariants	pass
booleans/3303-inward-cut-of-frustum-top-face	tangency-labs/solidcraft#3303 tangency-labs/solidcraft#3309	cutting the complete circular top face of a widening conical frustum inward: the cylindrical tool touches the cone only at its rim	analytic	pass
booleans/3327-cut-ending-flush-with-side-wall	tangency-labs/solidcraft#3327 tangency-labs/solidcraft#2963	a cut whose end face lies exactly in a side wall of its target (a window notch): the cut must open the wall, with no skin left in it	analytic	pass
booleans/3378-circular-pattern-of-join-that-merged-targets	tangency-labs/solidcraft#3378	a circular pattern of a join whose two targets (rim and hub) were merged into one body by that join	analytic	pass
booleans/3379-circular-pattern-of-thin-spoke-on-ring	tangency-labs/solidcraft#3379	a circular pattern (count 5) of a spoke thinner than the ring it joins (faces 0.5 mm inside the rim and hub faces)	analytic	pass
booleans/3383-combine-tool-into-rotated-occurrence	tangency-labs/solidcraft#3383	a root body joined into a body inside a component whose occurrence is turned a quarter turn: the tool must stay where it is in the world	analytic	FAIL: shells Plate: 2 (want 1); volume_mm3 17000 (want 16750); bbox.min [-20, -10, -20] (want [-20, -10, -25]); bbox.max [20, 25, 20] (want [20, 5, 20])
booleans/3447-split-along-plane-of-a-face	tangency-labs/solidcraft#3447 tangency-labs/solidcraft#2979	split body where the splitting plane contains an end face (with a boss on it and an R1 fillet on the face's edge)	analytic	pass
booleans/3455-join-of-64-separate-pegs	tangency-labs/solidcraft#3455	one combine of 64 separate pegs that do not touch: 36 s on truck, growing 4-9x per doubling; must finish in seconds	analytic	HANG: no result after 20 s
booleans/3456-deep-cut-through-drilled-taper-leaves-base	tangency-labs/solidcraft#3456 tangency-labs/solidcraft#3497	a deep cut that removes everything above z=2 of a tapered body with nine through-bores, leaving the 2 mm drilled base	analytic	pass
booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs	tangency-labs/solidcraft#3460	Combine cut (keep tools) of an enclosure by its lid whose insert is flush with the inner walls and carries four small half-moon tabs that cross them; the cut must not return the target unchanged	analytic	pass
booleans/3485-boss-joined-on-rod-top-keeps-side-whole	tangency-labs/solidcraft#3485 tangency-labs/solidcraft#3062	a boss joined on a rod's top face (the join runs the boss on into the rod); the rod's side must stay one face, not seamed at the boss's foot	analytic	pass
booleans/3497-collinear-cylinders-partial-height-intersection	tangency-labs/solidcraft#3497 tangency-labs/solidcraft#3456	intersection of two collinear R2 H12 cylinders offset by 0.75 along the axis (curved walls coincide over part of the height)	analytic	pass
booleans/3497-pin-overlapping-bore-by-20-microns	tangency-labs/solidcraft#3497 tangency-labs/solidcraft#3456	a pin r=3.02 intersected with a tube whose bore is r=3: a thin annulus (0.02 mm overlap on a curved wall)	analytic	pass
booleans/3526-intersect-keeps-every-lump	tangency-labs/solidcraft#3526 tangency-labs/solidcraft#3888	intersect of a two-lump target (two spheres joined while apart) with a box holding the bottom half of each	analytic	pass
booleans/3604-cut-with-g2-swept-tool-along-projected-edge	tangency-labs/solidcraft#3604 tangency-labs/solidcraft#3613	cut of a box by a swept G2 corner-removal tool along a projected edge chain (left-rear corner; the symmetric front-left chain works)	invariants	FAIL: step 12 (solid.sweep): the path curves are not connected end to end
booleans/3612-circular-pattern-of-spoke-tangent-to-hub	tangency-labs/solidcraft#3612 tangency-labs/solidcraft#3379	a spoke whose inner face x=12 is exactly tangent to the hub cylinder r=12 (line contact), joined to the rim, patterned 5 times around the hub's axis	analytic	FAIL: step 4 (solid.box): SMLib boolean: SMLib's check refuses the result: 2 failed tests: SmTrimmingTools::Test #3 Loop Orientation: Face Loop has bad orientation [o
booleans/3633-sphere-intersect-pyramid-apex-at-centre	tangency-labs/solidcraft#3633 tangency-labs/solidcraft#3682	a sphere r=10 intersected with a square pyramid whose apex is the sphere's centre and whose sides lie in the planes of the sphere primitive's patch edges	analytic	pass
booleans/3652-mirror-of-a-mirror-feature	tangency-labs/solidcraft#3652	mirror a Mirror feature (the first mirror's hole) about a second plane: 'Mirror1 cannot be patterned or mirrored yet'	analytic	pass
booleans/3665-join-extrude-column-on-floor-and-curved-walls	tangency-labs/solidcraft#3665 tangency-labs/solidcraft#3666	a join extrude of a column standing on a channel's flat floor and lying along both its curved walls (column circle tangent to both walls)	analytic	FAIL: measure Housing: the operation failed: not supported yet: tessellation: face 9 (plane): boundary crosses its (want measurable); body_count 0 (want 1); volume_mm3 0 (want 62248.4964)
booleans/3671-intersect-tool-in-top-face-beside-rib	tangency-labs/solidcraft#3671	intersect with a tapered pocket tool whose top face lies in the block's top face, 0.5 mm short of a rib	analytic	pass
booleans/3702-board-in-cavity-of-filleted-rim-case	tangency-labs/solidcraft#3702	a 0.2 mm board lying in the open cavity of a case with a filleted circular rim: cutting it from the case must leave the case unchanged (it was taken for wholly inside)	analytic	pass
booleans/3703-two-face-extrudes-join-keep-the-step	tangency-labs/solidcraft#3703	two joined face extrudes on one box (top face, then the right side face): the stepped shape must stay	analytic	pass
booleans/3729-extrude-to-point-on-step-edge	tangency-labs/solidcraft#3729	extrude to a point lying exactly on the top edge of a step: must end at the plane z=20 through the point	analytic	pass
booleans/3782-emboss-on-cylinder-pick-on-far-half	tangency-labs/solidcraft#3782 tangency-labs/solidcraft#3425	emboss on a cylinder with the face pick on the half of the wall opposite the sketch	invariants	FAIL: step 5 (solid.emboss): rebuilding the B-rep: portable B-rep: face 2 loop 0 use 1: pcurve middle lifts off its edge's curve by 20 mm (tolerance 0.000044192448978
booleans/3816-circular-pattern-of-body-about-offset-axis	tangency-labs/solidcraft#3816	circular pattern of a body about an axis {origin,dir} that does not pass through the world origin	analytic	pass
booleans/3830-split-cup-by-extended-spline-surface	tangency-labs/solidcraft#3830	split a thin-walled cup (shell of a d30 cylinder) with a surface body: an extruded spline surface, extended at both ends	analytic	not supported yet: step 10 (surface.extend): invalid input: not supported yet: extending a surface of more than one face (this one has 3)
booleans/3841-join-touching-along-one-circle-only	tangency-labs/solidcraft#3841 tangency-labs/solidcraft#168	Join of a ring (r10..15) onto a coin (r10) that touch only along a circle: no fusion that moves the ring	invariants	FAIL: shells Coin: 2 (want 1); body_count 1 (want 2)
booleans/3850-cross-cut-touching-round-side	tangency-labs/solidcraft#3850 tangency-labs/solidcraft#3741	a O50 x 50 cylinder with a 25 mm square through-hole, then a cross cut by a O40 circle split into two halves by a line (both halves picked, merged into one round tool whose end face x=25 touches the cylinder's side along y=0): the result must be one shell, not a good shell plus a zero-area one	analytic	pass
booleans/3850-hole-through-wall-after-cross-cut	tangency-labs/solidcraft#3850 tangency-labs/solidcraft#3741	the O10 through-all hole across the wall of the body from the cross-cut case (the report's failing step: 'lumps: cannot mesh a complete shell boundary')	analytic	pass
booleans/3887-ring-standing-on-perforated-plate	tangency-labs/solidcraft#3887 tangency-labs/solidcraft#2844	a ring (r19.6/20.8, 20 tall) joined onto an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes; the ring's foot crosses the holes	analytic	FAIL: measure Plate: the operation failed: not supported yet: tessellation: face 1 (plane): triangulation does not (want measurable); body_count 0 (want 1); volume_mm3 0 (want 6744.7762)
booleans/3968-hole-as-wide-as-a-cones-top	tangency-labs/solidcraft#3968	a hole of diameter 10 drilled into the top of a truncated cone whose top is also diameter 10 (the hole wall meets the cone at the top rim)	analytic	pass
booleans/4008-symmetric-revolve-cut-ends-in-side-face	tangency-labs/solidcraft#4008	symmetric 180 deg revolve cut about a vertical edge of a block, the tool's end faces lying in the block's side face	analytic	pass
booleans/4011-mirror-of-cut-under-wall	tangency-labs/solidcraft#4011	a blind hole mirrored to a spot where half its top disc lies under a wall's foot	analytic	pass
booleans/4058-walls-joined-flush-round-a-floor	tangency-labs/solidcraft#4058 tangency-labs/solidcraft#4059	a 10 mm ring (rounded corners) extruded 40 mm as a Join round a floor's outline: it touches the floor back to back on its flat sides and rounded corners	analytic	pass
booleans/4095-slab-cut-standing-off-a-bore-r10	tangency-labs/solidcraft#4095	a slab cut whose +x face stands 6.73e-05 mm (0.90 x the coincidence tolerance 7.48e-05) off a through-bore's wall (R=10), beside the bore	analytic	pass
booleans/4095-slab-cut-standing-off-a-bore-r15	tangency-labs/solidcraft#4095	a slab cut whose +x face stands 6.60e-05 mm (0.60 x the coincidence tolerance 1.10e-04) off a through-bore's wall (R=15), beside the bore	analytic	pass
booleans/423-through-all-cut-must-not-reach-behind-sketch-plane	tangency-labs/solidcraft#423	a one-sided Through All cut from a sketch plane at x=98 toward -x, with its wall 0.0022 mm from a face of a notch beyond the plane: the cut must remove nothing at x > 98	analytic	pass
booleans/451-cut-block-crossing-hollow-sphere-tool	tangency-labs/solidcraft#451	a 12x8x8 block (x 8..20) crossing the inner sphere r=18.5 of a hollow spherical-shell tool: the cut keeps the part inside r=18.5	analytic	pass
booleans/451-cut-block-inside-hollow-sphere-tool	tangency-labs/solidcraft#451	a block wholly inside the void of a hollow spherical-shell tool (r 18.5 to 40): cutting leaves it untouched, the tool never reaches it	analytic	pass
booleans/500-coaxial-cylinder-cut-from-thin-disc	tangency-labs/solidcraft#500	a radius 20 cylinder cut out of a coaxial radius 40 disc spanning x -1..1 lost about 2.6% of the volume	analytic	pass
booleans/559-through-hole-into-shelled-box-rim	tangency-labs/solidcraft#559	a 1 mm through-all hole straight down into the 2 mm rim of a shelled box: 'implausible volume' / no result	analytic	pass
booleans/562-press-pull-floor-beside-rounds	tangency-labs/solidcraft#562	Press Pull of a floor whose neighbours are rounds (vertical corner fillets): 'a neighbouring edge is not straight'	analytic	FAIL: step 3 (solid.press_pull): SMLib boolean: SMLib's check refuses the result: 21 failed tests: SmBrep::Test #59 Tolerance: Edge tolerance relative to brep toleran
booleans/831-tapered-extrude-d-shape-arc-meets-line	tangency-labs/solidcraft#831	tapered extrude of a D shape (an arc meeting a line at a sharp corner): refused as 'tapered profiles where an arc meets another edge at a corner'	analytic	pass
booleans/831-tapered-extrude-text-glyph	tangency-labs/solidcraft#831	tapered extrude of a text glyph (Bezier outline): refused with a misleading 'mixing lines and arcs' error	invariants	FAIL: step 4 (solid.extrude): SMLib extrude: the draft cannot continue the walls exactly: the curve from (0.6600, 2.3989, 0.0000) is neither a line nor an arc
crashes/1219-bore-fillet-then-grooves-cut	tangency-labs/solidcraft#1219	24 small grooves cut into a bore whose top edge has an unrelated 1 mm fillet: 73 s and 24 boolean retries instead of 0.2 s	analytic	pass
crashes/140-join-pad-hanging-past-the-edge	tangency-labs/solidcraft#140	a join whose tool face lies flat on the target but only half backed by it (the pad hangs 10 mm past the edge) must not add material	analytic	pass
crashes/1985-step-export-enclosure-screw-hole	tangency-labs/solidcraft#1985 tangency-labs/solidcraft#2243	a small enclosure (rounded box, inner cut, corner gusset with a screw hole, two standoffs, USB cut-out) whose STEP export never finished (the export meshes its own file back)	invariants	pass
crashes/2243-step-export-flanged-enclosure	tangency-labs/solidcraft#2243 tangency-labs/solidcraft#1985	a flanged enclosure with two standoffs and no screw hole whose STEP export also never finished	invariants	pass
crashes/2357-join-ring-of-90-cylinder-segments	tangency-labs/solidcraft#2357	one join of a ring of 90 straight cylinder segments, each overlapping its neighbour at a 4 degree joint: a caught truck panic, then a refusal after 21 minutes	invariants	FAIL: step 3 (solid.combine): SMLib boolean: SMLib's check refuses the result: 90 failed tests: SmBSplineCurve::Test #13 Bad CurveCusp: 2D BSplineCurve Warning: Extre
crashes/2992-join-disk-and-36-twisted-loft-blades	tangency-labs/solidcraft#2992	join of a disk and a circular pattern of 36 twisted lofted blades (embedded 2.54 mm in the disk): blocks for minutes	invariants	HANG: no result after 20 s
crashes/3540-cut-with-coincident-cylinder-face	tangency-labs/solidcraft#3540	a groove cut whose r33 arcs lie exactly on the r33 cylinder of an earlier slot cut and overlap it in Z: minutes of CPU	analytic	pass
crashes/3685-delete-fillet-face-beside-seam	tangency-labs/solidcraft#1559 tangency-labs/solidcraft#3685	Delete Face on a fillet face next to a face whose edge a boolean/fillet rebuilt as an intersection curve: must never panic (truck: not implemented: intersection curve cannot connect by homotopy)	analytic	pass
crashes/4092-loft-ribs-rounded-pad-union-panics	tangency-labs/solidcraft#4092	join extrude of a rounded pad over a lofted body with ring and ribs: repeated truck intersection_curve panics, then 'boolean Union: no result'	invariants	FAIL: step 50 (solid.extrude): SMLib boolean: operation: SMLib failed (status 1001)
crashes/4092-loft-ribs-rounded-pad-union-reduced	tangency-labs/solidcraft#4092	the same without the top flange: the join fails with 'boolean Union: no result'	invariants	FAIL: step 40 (solid.extrude): SMLib boolean: operation: SMLib failed (status 1001)
fillets/1008-fillet-tray-floor-and-three-of-four-corners	tangency-labs/solidcraft#1008	an R10 round on the four inside floor edges and three of the four inside vertical corners of an open tray, so one corner keeps a sharp vertical edge where two floor rounds meet (rebuilt from the report's edge picks: the original design is not in the report)	analytic	pass
fillets/1080-chamfer-beside-openings-fits	tangency-labs/solidcraft#1080 tangency-labs/solidcraft#1124	a 4 mm chamfer on the top front edge of a cube with three square openings stays clear of the openings (they start 5 mm in)	analytic	pass
fillets/1080-chamfer-runs-into-openings-refused	tangency-labs/solidcraft#1080 tangency-labs/solidcraft#1124	a 9 mm chamfer on the top front edge of a cube with square openings 5 mm in must be refused: it would cut through the rims of the openings	invariants	pass
fillets/1191-fillet-both-rims-of-a-tube-top	tangency-labs/solidcraft#1191	an R2 round on the outer and inner rim circles of a tube's top face (the report's ten picks on a ring-shaped top: the round failed after 0.10.1; rebuilt as a plain tube since the design is not in the report)	analytic	pass
fillets/1207-fillet-concave-arc-at-boss	tangency-labs/solidcraft#1207	an R2 round on the concave arc where a bar top meets a boss that only partly sits on it	analytic	not supported yet: step 3 (solid.fillet): not supported yet: the fillet is larger than the faces beside its edges allow
fillets/1207-fillet-straight-edge-ending-on-boss	tangency-labs/solidcraft#1207	an R2 round along the straight top edge of a bar that runs out against a cylindrical boss	analytic	pass
fillets/1213-round-end-circle-of-bent-tube	tangency-labs/solidcraft#1213 tangency-labs/solidcraft#1291	an R3 round on the end circle of a lofted tube whose axis bends (a 60 degree torus section)	analytic	pass
fillets/1262-fillet-boss-bottom-arc	tangency-labs/solidcraft#1262	a 0.8 mm round on the exposed half circle at the bottom of a cylindrical boss joined to a box side	analytic	FAIL: step 3 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001)
fillets/1390-chamfer-hole-rim-touching-bottom	tangency-labs/solidcraft#1390 tangency-labs/solidcraft#1574 tangency-labs/solidcraft#1428	a 3 mm chamfer on the rim of a hole that is tangent to the bottom face runs off that face and must not add material below the part	invariants	pass
fillets/1488-fillet-slab-end-after-nudged-loft-join	tangency-labs/solidcraft#1488 tangency-labs/solidcraft#1517	an R1 fillet on the end edge of a 3.5 mm slab after a pleated loft was joined flush with its inner face (the join needs a tool retry; later fillets must still work)	invariants	pass
fillets/1557-fillet-vertical-corners-after-bottom-rounds	tangency-labs/solidcraft#1557 tangency-labs/solidcraft#1581	vertical corner fillets R2 on a 25x25x10 box whose four bottom edges are already rounded R2 (the round meets the earlier mitre)	analytic	FAIL: faces 14 (want 18)
fillets/1667-fillet-rim-line-beside-quarter-turns	tangency-labs/solidcraft#1667 tangency-labs/solidcraft#1702	an R5 round of the top rim of a 297 mm long box whose corners are R5 (a 287 mm line beside 7.85 mm quarter turns)	analytic	FAIL: volume_mm3 1779142.942702 (want 1776536.244667)
fillets/1668-fillet-both-sides-of-thin-wall	tangency-labs/solidcraft#1668 tangency-labs/solidcraft#1720	an R5 round on an outer top edge and the matching inner (concave) edge of a 2 mm wall in one feature fits, as it does one after the other	analytic	pass
fillets/190-fillet-rim-as-tall-as-wall	tangency-labs/solidcraft#190 tangency-labs/solidcraft#318	an R2 round of the top edge of a disc 2 mm high (the round is as tall as the wall, so it meets the bottom face)	analytic	pass
fillets/193-paste-copies-the-fillets	tangency-labs/solidcraft#193 tangency-labs/solidcraft#214 tangency-labs/solidcraft#363 tangency-labs/solidcraft#613	a block with two R2 top edges rounded, copied and pasted 40 mm over: the copy must carry its own fillets	analytic	pass
fillets/1986-chamfer-arc-edge-of-joined-sectors	tangency-labs/solidcraft#1986	a 3 mm chamfer on the outer top arc of a 120 degree annular sector joined to a lower inner sector (the joined outer wall must not limit the chamfer)	analytic	pass
fillets/199-fillet-uses-up-end-face	tangency-labs/solidcraft#199 tangency-labs/solidcraft#317	an R3 round on the four vertical edges of a 14x6x10 box: the two rounds on each 6 mm end face meet exactly (the face is used up)	analytic	pass
fillets/219-pattern-of-filleted-pockets	tangency-labs/solidcraft#219	a plate with 6 pockets made by patterning one pocket and the R3.2 round of its four corner edges, the pocket height set by a parameter	analytic	pass
fillets/2341-pattern-of-chamfered-bosses	tangency-labs/solidcraft#2341 tangency-labs/solidcraft#2774 tangency-labs/solidcraft#2775 tangency-labs/solidcraft#2342	a 2 x 2 grid made by a feature pattern of a boss and its two chamfers (a concave root chamfer and a convex tip chamfer)	analytic	FAIL: step 9 (solid.chamfer): SMLib chamfer: operation: SMLib failed (status 1001)
fillets/237-fillet-concave-edge-between-two-cylinders	tangency-labs/solidcraft#237 tangency-labs/solidcraft#238	an R6 round on the vertical edge where two cylinder walls meet (the concave corner of two merged discs), the two walls meeting at an angle	analytic	pass
fillets/2498-fillet-tiny-end-edges-rounded-rectangle	tangency-labs/solidcraft#2498 tangency-labs/solidcraft#2506	an R2 round of the top loop of a 26.4x8.6x8.4 rounded rectangle whose end edges are only 0.02 mm long (corner radius 4.29)	analytic	pass
fillets/2672-chamfer-one-pick-large-plate	tangency-labs/solidcraft#2672 tangency-labs/solidcraft#3295	one pick on a stadium boss top rim chamfers the whole tangent loop, also when the part is more than 200 mm across	analytic	FAIL: faces 12 (want 15); volume_mm3 215013.754884 (want 214980.737398)
fillets/2708-fillet-curvature-continuous-angled-ends	tangency-labs/solidcraft#2708 tangency-labs/solidcraft#2739	a curvature-continuous (G2) fillet of size 5 on a straight edge that ends on two slanted planar faces	analytic	pass
fillets/2719-chamfer-as-wide-as-corner-round	tangency-labs/solidcraft#2719	a 1 mm chamfer round a bottom loop whose corners are R1 rounds: each corner cone closes to a point on the bottom face	analytic	pass
fillets/2752-fillet-rim-of-flat-cut-on-sphere	tangency-labs/solidcraft#2752 tangency-labs/solidcraft#2787	an R1 round round the rim of a radius-2 sphere cut flat at z=1	analytic	FAIL: step 3 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001)
fillets/2797-chamfer-two-distances-circular-rim	tangency-labs/solidcraft#2797 tangency-labs/solidcraft#3300 tangency-labs/solidcraft#2893	a Two Distances chamfer (1 mm on the top face, 0.5 mm down the wall) on the circular rim between a plane and a cylinder	analytic	pass
fillets/2811-fillet-rib-roots	tangency-labs/solidcraft#2811	an R1.5 fillet of the 32 vertical root edges of 8 ribs between two walls of a grille tray (a performance case: the time must not blow up)	analytic	pass
fillets/2852-fillet-outer-round-concentric-with-inner	tangency-labs/solidcraft#2852	an R18 round on the outside top edges of a 3 mm thick upside-down U, concentric with the R15 round of its inside edges	analytic	pass
fillets/2907-chamfer-two-end-outlines-rounded-top	tangency-labs/solidcraft#2907 tangency-labs/solidcraft#3861	a 1.5 mm chamfer of both end outlines (sides, top and the two top arcs) of a prism with rounded top corners, bottom edges left alone	analytic	pass
fillets/324-fillet-over-hole-overlap	tangency-labs/solidcraft#324 tangency-labs/solidcraft#1885	a 4 mm fillet on a top edge whose round overlaps the rim of a through hole (the hole breaks into the round)	analytic	not supported yet: step 6 (solid.fillet): not supported yet: the fillet is larger than the faces beside its edges allow
fillets/3276-chamfer-edge-of-1mm-protrusion-on-joined-l	tangency-labs/solidcraft#3276	three extrudes joined into an L-shaped body with a 1 mm protrusion, then a chamfer on the protrusion's outer edge (the report: the corners are no longer 90 degrees and the chamfer fails)	analytic	pass
fillets/334-fillet-top-outline-after-concave-rounds	tangency-labs/solidcraft#334 tangency-labs/solidcraft#335	an R2 round on the whole top outline of two merged cylinders after their two concave vertical edges were rounded R5	analytic	pass
fillets/3369-fillet-edge-ends-on-tangent-seam	tangency-labs/solidcraft#3369 tangency-labs/solidcraft#3922	an R2 round on a straight edge whose ends sit on the tangent seam between a flat top and a rounded end	analytic	pass
fillets/3435-fillet-larger-than-top-ring	tangency-labs/solidcraft#3435 tangency-labs/solidcraft#3441	a fillet of radius 6.9 on a cylinder rim whose flat top ring (round the joined boss) is only 4.3 mm wide must be refused, not grow the part	invariants	pass
fillets/3655-chamfer-edge-order-box	tangency-labs/solidcraft#3655 tangency-labs/solidcraft#3660	a plain box with all 12 edges chamfered, the edges listed in an order that was refused	analytic	pass
fillets/3753-circular-pattern-of-hole-and-its-rim-chamfer	tangency-labs/solidcraft#3753	a circular pattern (6 copies about Y) of a through hole and the 1 mm chamfer on its rim (the report: the pattern is refused because the copied chamfer 'would grow the part'); rebuilt as a hole in a disc, the original design is not in the report	analytic	pass
fillets/3779-chamfer-all-spline-spans	tangency-labs/solidcraft#3779 tangency-labs/solidcraft#3804	a 0.1 mm chamfer on all eight top-rim spans of a 20 x 20 pillow whose four sides are fit splines (two cubic spans each)	invariants	pass
fillets/3779-fillet-all-spline-spans	tangency-labs/solidcraft#3779 tangency-labs/solidcraft#3804	a 0.1 mm fillet on all eight top-rim spans of a 20 x 20 pillow whose four sides are fit splines (two cubic spans each)	invariants	pass
fillets/3868-chamfer-concave-edge-adds-material	tangency-labs/solidcraft#3868	a chamfer of an inside (concave) edge fills the corner and adds material, one on the outside edge removes it	analytic	pass
fillets/4055-chamfer-bar-edge-over-joined-pin	tangency-labs/solidcraft#4055	a 3 mm chamfer on the bottom long edge of a bar joined on top of a pin, where the chamfer is wider than the 2 mm gap between that edge and the pin	analytic	not supported yet: step 3 (solid.chamfer): not supported yet: the chamfer is larger than the faces beside its edges allow
fillets/4101-chamfer-tapered-plug-corners	tangency-labs/solidcraft#4101	the four edges of a block end face chamfered where the block sides are 1 degree off square: exact volume of the plane-clipped prism (the corner edges of about 0.0001 mm are real geometry)	analytic	pass
fillets/4141-fillet-corner-after-wedge-cut-beside-bspline	tangency-labs/solidcraft#4141	an R5 round on the corner edge left by a wedge cut through a body vertex next to a B-spline face	invariants	pass
fillets/4143-fillet-notch-rim-on-bspline-ramp	tangency-labs/solidcraft#4143	an R4 round on the rim of an R5 notch where its cylinder meets an extruded B-spline ramp, both ends running into a square wall	invariants	pass
fillets/485-fillet-d-prism-top-outline-arc-and-flat	tangency-labs/solidcraft#485 tangency-labs/solidcraft#604	an R0.5 round on both top perimeter edges (the arc and the flat) of a D-shaped prism, the two edges meeting at sharp 90 degree corners	analytic	pass
fillets/556-fillet-edge-ending-on-curved-boss	tangency-labs/solidcraft#556 tangency-labs/solidcraft#646	an R0.5 round on a single straight bottom edge of a box whose end runs out against a cylindrical boss wall	analytic	pass
fillets/783-fillet-pick-far-from-any-edge-refused	tangency-labs/solidcraft#783 tangency-labs/solidcraft#820	a fillet whose edge pick is 15 mm from the nearest edge must be refused, not applied to some other edge	invariants	pass
fillets/814-chamfer-hex-hole-corners	tangency-labs/solidcraft#814 tangency-labs/solidcraft#1067	a 2 mm chamfer on the six vertical corners of a hexagonal hole: one bevel each, not a notch	analytic	pass
fillets/851-fillet-three-edges-at-knife-edge-arc-corner	tangency-labs/solidcraft#851 tangency-labs/solidcraft#854 tangency-labs/solidcraft#926 tangency-labs/solidcraft#935 tangency-labs/solidcraft#1294	three edges meeting at the front corner of a plate with a concave arc wall that runs out in a knife-edge tip: top front edge, arc top edge and front upright, R2 together	invariants	pass
fillets/862-fillet-curvature-continuous-box-edge	tangency-labs/solidcraft#862	a curvature-continuous (G2) fillet of size 6 on one edge of a 20 mm cube	analytic	pass
fillets/896-fillet-smooth-seam-refused	tangency-labs/solidcraft#896 tangency-labs/solidcraft#936	a fillet picked on the seam where a rounded edge runs tangent into the flat top has no corner to round and is refused as an invalid pick	invariants	pass
import/1721-closed-bspline-tube-face	tangency-labs/solidcraft#1721 tangency-labs/solidcraft#3880	a cylinder r=10 h=30 whose side is a closed (rational B-spline) tube face wrapping all the way round a closed non-periodic surface: it must mesh and measure as the full tube	analytic	pass
import/2043-outer-bound-opposing-surface-sense	tangency-labs/solidcraft#1974 tangency-labs/solidcraft#2043	a block whose every plane's axis points into the part and whose faces say same_sense .F. while their FACE_OUTER_BOUND loops run counter-clockwise about the outward normal: the loops are outer bounds, not holes	analytic	pass
import/258-cone-point-vertex	tangency-labs/solidcraft#258	the same STEP cone with a VERTEX_LOOP at the apex: the mesh stopped 30 mm short of the apex	analytic	pass
import/258-cone-to-point	tangency-labs/solidcraft#258	a STEP cone 20 mm across coming to a point 30 mm up (no vertex at the apex): the cone face was meshed flat at its base, so the measured shape was far off	analytic	pass
import/258-tiny-pin	tangency-labs/solidcraft#258	a STEP pin 0.5 mm across, 2 mm long: meshed 1.16 mm off at a 0.5 mm tolerance	analytic	pass
import/3098-bspline-edges-over-tiny-knot-span	tangency-labs/solidcraft#3098	a block whose 12 straight edges are degree-1 B-spline curves over a knot span of 1e-7 (as NX writes short edges); the faces must be kept	analytic	pass
import/3208-extruded-ellipse-face-over-parameter-seam	tangency-labs/solidcraft#3120 tangency-labs/solidcraft#3208	a prism over a circular segment whose curved side lies on a SURFACE_OF_LINEAR_EXTRUSION of an ELLIPSE (a = b = 10) and spans the ellipse's parameter origin (-60 to +60 degrees): the face must cover only the narrow segment side, not wrap the ellipse	analytic	pass
import/3352-vertex-off-its-edge-curve	tangency-labs/solidcraft#3351 tangency-labs/solidcraft#3352	a 300 mm square surface whose corner vertex sits 0.19 mm off the end of its edge's curve (the file declares 0.01 mm accuracy): the face must be kept, the vertex snapped onto the curve	analytic	pass
import/3359-iges-trim-pieces-written-end-to-start	tangency-labs/solidcraft#3358 tangency-labs/solidcraft#3359	a box of six trimmed planes whose composite trim curves have their 2nd and 4th pieces written end to start: every loop must still close	analytic	pass
import/3730-void-oriented-shell-false	tangency-labs/solidcraft#3730 tangency-labs/solidcraft#3872	a block with a closed cavity written as BREP_WITH_VOIDS whose void shell (outward-facing faces) is turned by ORIENTED_CLOSED_SHELL .F.; the cavity must be taken out, not added	analytic	pass
import/3806-iges-revolved-arc-spherical-cap-dome	tangency-labs/solidcraft#3806 tangency-labs/solidcraft#3813	a dome: an IGES surface of revolution (120) of a 60-to-90 degree circular arc (100) of radius 50 centred on the axis, trimmed by a circle at the rim, over a flat base disc; the cap must be 50 mm across and 6.7 mm tall, not a whole sphere	analytic	pass
import/3845-iges-trim-pieces-miss-by-a-gap	tangency-labs/solidcraft#3845 tangency-labs/solidcraft#3846	a box of six trimmed planes where the edge (0,0,0)-(0,20,0) stops 0.01 mm short of its end corner in both faces that use it: the small gap must be closed, giving a closed box instead of two dropped faces	analytic	FAIL: smlib_check SMLib check: 2 failed tests: SmTrimmingTools::Test #0 Edge/Edge Gap: Gap between an edge endPoint an (want ok)
import/3871-cone-base-circle-with-vertex-loop	tangency-labs/solidcraft#3871 tangency-labs/solidcraft#3901	the same cone with a VERTEX_LOOP at its point on the cone face: the point must still be reached, not read as a flat disc	analytic	pass
import/3871-cone-bounded-only-by-its-base-circle	tangency-labs/solidcraft#3871 tangency-labs/solidcraft#3901 tangency-labs/solidcraft#3880	a cone whose face is bounded only by its base circle (no vertex at the point) must reach its point, not come in as a flat disc	analytic	pass
import/3880-cylinder-seam-edge	tangency-labs/solidcraft#3880	a cylinder r=10 h=30 whose side face is written with a seam edge: one closed solid with 3 faces	analytic	pass
import/3880-nurbs-hemisphere-dome	tangency-labs/solidcraft#3880	a hemisphere r=20 whose curved face is a rational B-spline surface, flat disc below	analytic	pass
import/3886-iges-bspline-curve-over-tiny-knot-span	tangency-labs/solidcraft#3885 tangency-labs/solidcraft#3886	a box of six trimmed planes with one edge written as a B-spline curve (126) over a knot span of 1e-7: both faces it bounds must be kept	analytic	pass
import/3912-iges-hole-trim-first-piece-reversed	tangency-labs/solidcraft#3912	a 10 x 10 trimmed patch with a 4 x 4 square hole whose composite trim curve starts with a reversed piece: the hole stays a hole	analytic	pass
import/3913-iges-trim-curve-first-piece-reversed	tangency-labs/solidcraft#3912 tangency-labs/solidcraft#3913	a box of six trimmed planes whose composite trim curves start with a piece written end to start (1st and 3rd pieces reversed): every loop must still close	analytic	pass
import/3963-closed-spline-edge-vertex-past-start	tangency-labs/solidcraft#3963	a 20 mm square face bounded by one closed degree-1 B-spline edge whose only vertex sits at parameter 2e-7, just past the curve's start: the face must be kept, not dropped or crashed on	analytic	pass
import/3972-iges-two-separate-closed-boxes	tangency-labs/solidcraft#3928 tangency-labs/solidcraft#3972	an IGES file of twelve trimmed planes forming two separate closed boxes (10x20x30, one 100 mm along x): they must come in as two solids, not one open body	analytic	pass
import/4005-cylinder-written-as-near-zero-cone	tangency-labs/solidcraft#4005	a cylinder r=5 h=10 whose side is a CONICAL_SURFACE with a semi-angle of 8e-12 rad (a cylinder to within rounding, as the exporter wrote it): the face must be read, not refused as a 'bad cone'	analytic	pass
import/4006-plane-written-as-cone-of-nearly-right-angle	tangency-labs/solidcraft#4006	an annular plate r 4..10, 3 thick, whose top face is a CONICAL_SURFACE of semi-angle pi/2 - 7e-12 (a plane to within rounding, as the exporter wrote it): the face must be read, not refused as a 'bad cone', and the body stays closed	analytic	pass
sheet-metal/1040-convert-a-1200-mm-strip-1-mm-thick	tangency-labs/solidcraft#1040	a 1200 x 100 x 1 strip (diagonal over 1000 times its thickness) converted to sheet metal: refused with no outline on that face	analytic	pass
sheet-metal/1040-convert-a-990-mm-strip-keeps-its-1-mm-hole	tangency-labs/solidcraft#1040	a 990 x 100 x 1 strip with holes of 10, 4, 2 and 1 mm: the 1 mm hole fell out of the outline when the mesh sagged by almost the thickness	analytic	FAIL: measure Plate: the operation failed: not supported yet: tessellation: face 0 (plane): triangulation does not (want measurable); body_count 0 (want 1); volume_mm3 0 (want 98904.966822)
sheet-metal/1092-convert-a-channel-with-its-bends-modelled	tangency-labs/solidcraft#1092 tangency-labs/solidcraft#1314	a U channel modelled with its bend radii (R2 inside, R4 outside), a 6 mm hole in one wall and a label engraved 0.2 deep in its web, converted at the bends' outer arcs	analytic	pass
sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius	tangency-labs/solidcraft#1092 tangency-labs/solidcraft#1314	an L section modelled with a bend of R2 inside and R4 outside, converted at that bend under a rule of R3: the bend becomes one bend of the rule's radius at the legs' virtual sharp	analytic	pass
sheet-metal/1092-convert-an-engraved-plate	tangency-labs/solidcraft#1092 tangency-labs/solidcraft#1314	a 60 x 40 x 1 plate with a 20 x 10 x 0.1 engraving in its top face converted to sheet metal (refused as not a plate of even thickness; the engraving becomes a pocket of the sheet)	analytic	pass
sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend	tangency-labs/solidcraft#1095	a flange unfolded, a triangular cut-out with a corner on the sheet's own edge at the middle of the bend zone, refolded: sew failed (this wire is not simple)	analytic	FAIL: step 11 (solid.extrude): SMLib export: the mapped B-rep does not validate: portable B-rep: a closed shell bounds two regions and encloses one
sheet-metal/1280-hole-square-to-a-45-degree-flange	tangency-labs/solidcraft#1280	a 5 mm hole drilled square to the face of a 45 degree flange: the drill cap's certificate refused it by 1e-11 mm	analytic	pass
sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge	tangency-labs/solidcraft#1285 tangency-labs/solidcraft#1340	an 80 x 50 x 2 plate with a 40 wide, 30 high wall on part of its front edge, converted at the wall's outside bend edge: refused because the bend's setback used up an edge of a face	analytic	pass
sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece	tangency-labs/solidcraft#1295 tangency-labs/solidcraft#1338	a 100 x 60 sheet with a 45 degree 40 mm flange and a slot cut across the flange just past its bend: the rest of the flange keeps no material joining it to the base	analytic	pass
sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees	tangency-labs/solidcraft#1311	a 100 x 60 plate turned 62 degrees about the origin with a 90 degree inside flange on one edge: the trimmed corner falls on the sew grid and the flange failed to close	analytic	pass
sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief	tangency-labs/solidcraft#1232 tangency-labs/solidcraft#1481	a 120 x 90 base with two edge flange features (bottom and left edges with a round relief, top and right edges with a square one) over a rule whose relief is a notch, unfolded	analytic	pass
sheet-metal/1797-tray-with-torn-corners-at-72-degrees-folded	tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799	a tray whose flanges lean at 72 degrees with the tear corner relief: the torn ends are helices over slanted bends	invariants	pass
sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet	tangency-labs/solidcraft#1979 tangency-labs/solidcraft#1980	on a folded sheet a rectangular cut-out and then twenty 4 mm holes in one sketch: a cut after a cut was dropped without a word, and many holes ran out of budget	analytic	pass
sheet-metal/262-fold-a-tab-just-inside-its-root	tangency-labs/solidcraft#262 tangency-labs/solidcraft#277	a 20 x 20 tab folded 90 degrees on a line 1 mm inside its root, where the bend zone stays clear of the blank's outline	analytic	pass
sheet-metal/262-fold-at-a-tab-root-refused	tangency-labs/solidcraft#262 tangency-labs/solidcraft#277	a fold exactly at a tab's root, where the bend zone (+-BA/2) would reach the blank's outline beside the tab, needs a bend relief	invariants	pass
sheet-metal/264-fold-one-of-two-collinear-tabs	tangency-labs/solidcraft#264 tangency-labs/solidcraft#279	a 100 x 40 blank with two 15 x 7 tabs on one line, one tab folded 90 degrees on a line that the other tab also lies on	analytic	pass
sheet-metal/264-one-fold-across-two-collinear-tabs	tangency-labs/solidcraft#264	one fold line spanning both of two collinear tabs folds both	analytic	pass
sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges	tangency-labs/solidcraft#296 tangency-labs/solidcraft#355	an 80 x 40 base with a 30 mm flange on the y = 0 edge and a 15 mm flange on the x = 80 edge, and a round hole through the base beside them: sew failed with a non-manifold edge contact	invariants	pass
sheet-metal/3078-flange-on-the-side-edge-of-a-flange	tangency-labs/solidcraft#3078 tangency-labs/solidcraft#3274	an edge flange on the side edge of an existing wall, meeting a flange on the base across the existing bend with a round corner relief (not supported yet: a flange on the side of another flange)	invariants	pass
sheet-metal/3234-edge-flange-on-the-bend-line-refused	tangency-labs/solidcraft#3234 tangency-labs/solidcraft#3273	a second edge flange picked on the bend line of an existing flange made a doubled flange with a gap and two shells in one body	invariants	pass
sheet-metal/3316-convert-a-plate-keeps-its-place	tangency-labs/solidcraft#3316	a 100 x 60 x 2 plate converted from its top face moved down by one thickness (z -2..0 instead of 0..2)	analytic	pass
sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet	tangency-labs/solidcraft#3324 tangency-labs/solidcraft#3325 tangency-labs/solidcraft#3418	a fillet on a sheet metal corner changes the body but not its sheet model, so the flat pattern would be a sharp rectangle: it must refuse	invariants	pass
sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern	tangency-labs/solidcraft#3353 tangency-labs/solidcraft#3354	a sheet metal body mirrored into a new body must still be sheet metal (flat pattern, bend table): it was a plain solid	analytic	FAIL: step 13 (sheet.flat_pattern): invalid parameters for sheet.flat_pattern: Body1 (2) is not a sheet metal body
sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs	tangency-labs/solidcraft#3417 tangency-labs/solidcraft#3421 tangency-labs/solidcraft#3280	a 60 mm rhombus (120 and 60 degree corners) with a 90 degree flange on each of its four edges and a square corner relief 8 mm across: the reliefs at the two 120 degree corners would overlap	invariants	pass
sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-72-degrees	tangency-labs/solidcraft#349	a 2000 x 2500 tray with four 38.6 mm flanges at 72 degrees whose sketch is driven by parameters W and H, shrunk to 400 x 300 and unfolded (the solver leaves 1e-13 mm residuals: the planar region arrangement failed)	analytic	pass
sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees	tangency-labs/solidcraft#349	a 2000 x 2500 tray with four 38.6 mm flanges at 90 degrees whose sketch is driven by parameters W and H, shrunk to 400 x 300 and unfolded (the solver leaves 1e-13 mm residuals: the planar region arrangement failed)	analytic	pass
sheet-metal/405-tray-with-72-degree-flanges-folded	tangency-labs/solidcraft#405 tangency-labs/solidcraft#406	a 120 x 90 tray with four 38.6 mm flanges at 72 degrees closed with the rule's gap: the corners used to stay open as a V	invariants	pass
sheet-metal/405-unfold-a-tray-with-72-degree-flanges	tangency-labs/solidcraft#405 tangency-labs/solidcraft#406	a 120 x 90 tray with four 38.6 mm flanges at 72 degrees, closed at the corners with the rule's gap, unfolded	analytic	pass
sheet-metal/416-round-hole-and-slanted-slot-across-a-bend	tangency-labs/solidcraft#416 tangency-labs/solidcraft#425 tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799	a 160 x 100 plate with a 90 degree flange, unfolded, a 20 mm round hole and a 10 x 24 slot turned 30 degrees cut across the bend zone, refolded: the cut-out walls fold to curves on the bend's cylinder	analytic	pass
sheet-metal/436-edge-flanges-at-105-and-120-degrees-on-opposite-edges	tangency-labs/solidcraft#436 tangency-labs/solidcraft#447	one edge flange feature with its own angle and height on each of two opposite edges: 105 degrees and 30 mm, 120 degrees and 25 mm	analytic	pass
sheet-metal/436-edge-flanges-with-their-own-height-on-opposite-edges	tangency-labs/solidcraft#436 tangency-labs/solidcraft#447	one edge flange feature whose two edges carry their own heights (30 and 25 mm) over the feature's 20 mm default	analytic	pass
sheet-metal/436-unfold-a-tray-with-four-angles-and-heights	tangency-labs/solidcraft#436 tangency-labs/solidcraft#447 tangency-labs/solidcraft#501	one edge flange feature whose four edges carry 75, 90, 105 and 120 degrees and heights 38.6, 38.6, 30 and 25, with corners between unequal angles closed, unfolded	analytic	pass
sheet-metal/479-unfold-a-tray-with-round-relieved-corners	tangency-labs/solidcraft#479	a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape round, unfolded	analytic	pass
sheet-metal/488-unfold-a-tray-with-square-relieved-corners	tangency-labs/solidcraft#488	a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape rectangular, unfolded	analytic	pass
sheet-metal/514-refold-an-L-bracket-after-unfolding-it	tangency-labs/solidcraft#514	an L bracket unfolded and refolded: the refold must give the folded part back	analytic	pass
sheet-metal/514-unfold-an-L-bracket	tangency-labs/solidcraft#514	a 60 x 40 base with a 20 mm 90 degree flange on one edge, unfolded: the flat plate is the base, the bend allowance and the flange's straight	analytic	pass
sheet-metal/529-a-hundred-slots-and-four-folds	tangency-labs/solidcraft#529 tangency-labs/solidcraft#430 tangency-labs/solidcraft#964	a 200 x 300 panel with a hundred 4.4 x 20 slots and four 90 degree folds (one per side tab): the flat geometry ran out of its processing budget above 77 slots	analytic	HANG: no result after 20 s
sheet-metal/541-box-cut-straight-through-a-flat-sheet	tangency-labs/solidcraft#541	a solid.box cut straight through a 100 x 60 x 2.5 sheet was refused, though the same rectangle as an extrude cut works	analytic	pass
sheet-metal/542-round-hole-in-a-flat-sheet-and-its-flat-pattern	tangency-labs/solidcraft#542 tangency-labs/solidcraft#552	a 3.2 mm round hole cut through a 100 x 60 x 2.5 sheet, which the flat pattern must report as a circle	analytic	pass
sheet-metal/560-hole-through-a-sheet-metal-base	tangency-labs/solidcraft#560 tangency-labs/solidcraft#656	solid.hole square to a flat sheet metal panel was refused as sheet machining that cannot be preserved	analytic	pass
sheet-metal/570-flange-refuses-thickness-it-would-ignore	tangency-labs/solidcraft#570 tangency-labs/solidcraft#594 tangency-labs/solidcraft#572	sheet.flange given thickness, k_factor and bend_radius, which the rule alone defines, used to ignore them silently and build the 2.5 mm default	invariants	pass
sheet-metal/601-return-lip-on-a-flanges-far-edge	tangency-labs/solidcraft#593 tangency-labs/solidcraft#601	an edge flange stands on the far edge of another edge flange (a lip turned in over the base), both 90 degrees	analytic	pass
sheet-metal/634-flange-beside-the-leg-of-an-L-folded	tangency-labs/solidcraft#634	the same bar with its leg and a 15 mm inside flange on the bar's top edge, folded	analytic	pass
sheet-metal/634-unfold-a-flange-beside-the-leg-of-an-L	tangency-labs/solidcraft#634	a 160 x 30 bar with a 20 x 30 leg past its top edge at the left end, and a 90 degree 15 mm inside flange on the bar's top edge (x 20..160), unfolded: the flange's trim cut the leg away	analytic	pass
sheet-metal/638-fold-both-collinear-tabs-one-after-the-other	tangency-labs/solidcraft#638 tangency-labs/solidcraft#652 tangency-labs/solidcraft#963	two collinear tabs folded in two features on the same line; the second fold used to be refused as crossing a slanted edge	analytic	pass
sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank	tangency-labs/solidcraft#639 tangency-labs/solidcraft#653 tangency-labs/solidcraft#963	a tab (x 45..60, y 60..90) on an inside edge of an L-shaped blank folded 90 degrees at x = 59 with the fixed point on the other leg; refused as folding tabs that join again	analytic	pass
sheet-metal/659-ellipse-cutout-across-a-bend	tangency-labs/solidcraft#659 tangency-labs/solidcraft#692	a 160 x 100 plate with a 90 degree flange, unfolded, a 24 x 12 ellipse cut across the bend zone and refolded: the cut's wall folds to a curve on the bend's cylinder	analytic	pass
sheet-metal/659-ellipse-cutout-in-a-flat-sheet	tangency-labs/solidcraft#659 tangency-labs/solidcraft#692	a 20 x 12 ellipse cut through a 100 x 60 x 2.5 sheet: it became 0.001 mm chords, one face each	analytic	pass
sheet-metal/685-fold-with-the-fixed-point-on-the-top-face	tangency-labs/solidcraft#958	a large thin blank folded across its whole width with the fixed point exactly on the sheet's top face	analytic	pass
sheet-metal/702-flange-along-what-a-cutout-leaves	tangency-labs/solidcraft#702	a 200 x 100 plate whose bottom-left 100 x 60 is cut away, and a 90 degree 40 mm inside flange picked on what is left of the bottom edge (x 100..200)	analytic	pass
sheet-metal/723-tray-with-torn-corners-folded	tangency-labs/solidcraft#723 tangency-labs/solidcraft#809 tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799	a 120 x 90 tray with four 20 mm 90 degree flanges and the tear corner relief: each torn bend end is a helical cut across the bend	invariants	pass
sheet-metal/723-unfold-a-tray-with-torn-corners	tangency-labs/solidcraft#723 tangency-labs/solidcraft#809 tangency-labs/solidcraft#1797 tangency-labs/solidcraft#1799	a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape tear, unfolded	analytic	pass
sheet-metal/725-convert-a-shelled-tray-and-unfold-it	tangency-labs/solidcraft#647 tangency-labs/solidcraft#725 tangency-labs/solidcraft#1285 tangency-labs/solidcraft#1340	a 100 x 60 x 30 box shelled to 2 mm, converted to sheet metal by its four bottom edges and unfolded	analytic	pass
sheet-metal/774-convert-a-plate-with-nine-round-holes	tangency-labs/solidcraft#774 tangency-labs/solidcraft#977	a 30 x 30 x 2 plate with nine 4 mm holes converted to sheet metal (refused as not a plate of even thickness: the holes were read as polygons)	analytic	pass
sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded	tangency-labs/solidcraft#839	a 200 x 100 plate with its corners rounded 8 and one 40 mm inside flange on its bottom edge, unfolded: the trim made the outline's arcs chords	analytic	pass
sheet-metal/955-hole-drilled-into-a-sheet-metal-rim	tangency-labs/solidcraft#955	a 2 mm hole drilled 10 mm deep into the rim of a 4 mm sheet, along the panel; it is a bore the panel keeps	analytic	FAIL: step 6 (solid.hole): SMLib boolean: SMLib's check refuses the result: 1 failed tests: SmBSplineCurve::Test #7 Bad CurveKink: 2D BSplineCurve Warning: Kink at in
sheet-metal/978-edge-flange-beside-a-ledge-as-tall-as-its-setback	tangency-labs/solidcraft#978	a 90 degree inside flange of radius 1 on an edge that has a ledge beside it exactly as tall as the flange's setback (3 mm): sew failed with a degenerate edge	invariants	pass
shell/12-offset-one-split-face-piece	tangency-labs/solidcraft#12	Offset Face on one piece of a split face moves only that piece, not the coplanar neighbour	analytic	FAIL: step 3 (solid.offset_face): SMLib offset faces: operation: SMLib failed (status 1001)
shell/1494-shell-box-with-cylinder-on-edge-line	tangency-labs/solidcraft#1494	a 47.5x45x30 box with a cylinder r7.5 joined on its side whose axis lies in the plane of the box's front face (y=0), shelled 1 mm open at the bottom	invariants	FAIL: step 3 (solid.shell): SMLib shell: operation: SMLib failed (status 1001)
shell/1525-shell-box-with-rounds-chamfer-and-fillet	tangency-labs/solidcraft#1525	a 50x50x30 box with r10 vertical rounds, a 5 mm chamfer round the base and a 4 mm fillet where the chamfer meets the wall, shelled 2 mm open at the top	invariants	pass
shell/1972-shell-one-half-sphere-leaves-the-other	tangency-labs/solidcraft#1972	a sphere split into two hemispheres; shelling the flat face of one must hollow that half only, the other half stays solid	analytic	pass
shell/2531-shell-point-pick-after-parameter-edit	tangency-labs/solidcraft#2531	a shell opened by a point pick keeps opening only that face after a parameter edit moves the body under the stored point	analytic	pass
shell/2939-offset-face-sphere	tangency-labs/solidcraft#2939	Offset Face on a sphere's round face	analytic	pass
shell/3103-shell-tapered-cylinder	tangency-labs/solidcraft#3103	a cone frustum (r20 at the base, r15 at the top, 30 tall) shelled 2 mm open at the top	analytic	pass
shell/3283-offset-face-cylinder-wall	tangency-labs/solidcraft#3283 tangency-labs/solidcraft#3650	Offset Face on the outer cylindrical wall of a tube (the picker only accepted planar faces)	analytic	pass
shell/3468-offset-face-boss-wall-next-to-fillet	tangency-labs/solidcraft#3468 tangency-labs/solidcraft#3898	Offset Face on a boss wall whose base has a 2 mm fillet: the boss grows to r 11 and the fillet follows	analytic	FAIL: step 4 (solid.offset_face): SMLib offset faces: operation: SMLib failed (status 1001)
shell/3506-split-body-then-shell-both-halves	tangency-labs/solidcraft#3506	a box split in two at z=10, then each half shelled 2 mm open on the mating face	analytic	pass
shell/3576-shell-tapered-box-rounded-corners	tangency-labs/solidcraft#3576 tangency-labs/solidcraft#3573	a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design)	invariants	pass
shell/3669-shell-lofted-square-frustum	tangency-labs/solidcraft#3669 tangency-labs/solidcraft#2990	a loft between a 40 mm and a 20 mm square 80 mm apart, shelled 2 mm open at the small end	analytic	pass
shell/391-deboss-text-on-flange-of-filleted-shelled-body	tangency-labs/solidcraft#391	text debossed 0.6 mm into the flat flange top of a filleted and shelled tapered housing, well away from the curved walls	invariants	pass
shell/4009-closed-shell-internal-void	tangency-labs/solidcraft#4009	shell with no face removed: a closed hollow body with a sealed internal void	analytic	FAIL: step 5 (solid.shell): invalid parameters for solid.shell: select 1…1000 faces
shell/4010-shell-open-at-through-hole-wall	tangency-labs/solidcraft#4010	plate with a through hole shelled 2.5 mm with only the hole's wall removed	analytic	pass
shell/566-shell-swept-bar-with-bend	tangency-labs/solidcraft#566	a 8x5 bar swept along a line-arc-line path (quarter circle r30 between two 30 mm legs), shelled 0.5 mm open at its start	analytic	FAIL: step 9 (solid.sweep): SMLib export: pcurve: pcurve of loop 0 use 3 (Some([4.0, -2.5, 0.00020561684819202892]) to Some([3.999999999999998, -2.4999999999999996, -
shell/745-offset-face-on-body-with-distant-freeform-boss	tangency-labs/solidcraft#745 tangency-labs/solidcraft#3893	Offset Face on a planar end of a body that has a spline-outlined boss far from the moved face	invariants	pass
shell/745-offset-face-then-cut-boss-away	tangency-labs/solidcraft#745 tangency-labs/solidcraft#3893	the same end offset, then the boss and the box beyond x=24 cut away, which leaves an analytic body	analytic	pass
sweeps/1093-circular-pattern-of-a-lofted-join-blade	tangency-labs/solidcraft#1093 tangency-labs/solidcraft#1107	a tapered lofted blade (6 x 3 root embedded 2 mm into a disk, 3 x 1.5 tip) joined to a disk and patterned 9 times round the axis as joins (31 minutes with eight retries, or "cavity ownership is ambiguous")	analytic	pass
sweeps/1140-loft-hollow-tube-bands-halved-and-joined	tangency-labs/solidcraft#1140	two hollow lofted tube bands (outer r 30, bore r 18 on R100, 5 sections each, 45 degrees each), each cut in half through its axis plane z = 0 and the halves joined into one body ("no result" after ten minutes of fallbacks)	analytic	pass
sweeps/1184-loft-ring-sections-keep-the-hole	tangency-labs/solidcraft#1184 tangency-labs/solidcraft#1254 tangency-labs/solidcraft#2435 tangency-labs/solidcraft#2447	a loft between two ring sections (outer r 20, inner r 12) 20 mm apart (the hole was dropped and a solid disc built)	analytic	pass
sweeps/1269-sweep-parallel-orientation-oblique-cylinder	tangency-labs/solidcraft#1269	a circle of radius 5 on XY swept with orientation parallel along a path rising 20 mm while leaning 20 mm in x (the profile does not turn: a sheared cylinder)	analytic	pass
sweeps/1269-sweep-twisted-square-ninety-degrees	tangency-labs/solidcraft#1269	a 10 x 10 square swept 40 mm along a straight path while turning 90 degrees about the path	analytic	pass
sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg	tangency-labs/solidcraft#1391 tangency-labs/solidcraft#1556	a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 20 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane ("Union: no result")	analytic	pass
sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg	tangency-labs/solidcraft#1391 tangency-labs/solidcraft#1556	a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 40 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane ("Union: no result")	analytic	pass
sweeps/1411-coil-intersected-with-a-cylinder-holding-it	tangency-labs/solidcraft#1411	a 4-turn coil (centre diameter 40, wire 3 mm, pitch 8) intersected with a cylinder of radius 25 and height 40 that holds it (crash report: unclean exit in solid.coil)	analytic	pass
sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs	tangency-labs/solidcraft#1490	a wall 2.5 mm thick with a 30 x 20 window cut through it and a loft (34 x 24 growing to 38 x 28 over 3.5 mm) joined into the window so that its strips overhang the wall on both faces ("Union: no result" at some wall thicknesses)	analytic	pass
sweeps/1666-loft-zigzag-to-flat-rectangle	tangency-labs/solidcraft#1666	a ruled loft from an 18-vertex zig-zag section to a flat 52 x 3 rectangle with 18 vertices (8 of them collinear), whose twisted ruled faces were exported as crossing triangles	analytic	pass
sweeps/1669-mirrored-window-and-loft-on-a-hollow-case	tangency-labs/solidcraft#1669	a closed hollow box (60 x 60 x 40, 2.5 mm walls) with a window cut in one end wall and a loft joined into it, both mirrored about the middle plane x = 30 onto the far wall ("Union: no result" on the mirror only)	analytic	pass
sweeps/1853-revolve-cut-half-a-slot-about-its-centreline	tangency-labs/solidcraft#1853 tangency-labs/solidcraft#1866	half a slot (r 3, centres 14 apart) revolved a full turn about its own centreline, which lies in the top face of a plate, as a cut (no result after about 10 s of retries)	analytic	FAIL: step 8 (solid.revolve): SMLib export: pcurve: pcurve of loop 0 use 0 (Some([-10.0, 1.8369701987210297e-16, 10.0]) to Some([-7.0, -3.0, 10.0])): no pcurve within
sweeps/1856-disk-and-36-twisted-lofted-blades-joined	tangency-labs/solidcraft#2992 tangency-labs/solidcraft#1856	a disk joined to 36 patterned twisted lofted blades (each a loft of 9 rectangle sections turning 7.5 degrees apart, rooted 2 mm inside the disk): hang of minutes	analytic	pass
sweeps/1866-revolve-half-slot-profile-180	tangency-labs/solidcraft#1866	half a slot (r 3, centres 14 apart; the segment before the axis edge comes back to the axis along an arc) revolved 180 deg about its centreline	analytic	pass
sweeps/1866-revolve-half-slot-profile-90	tangency-labs/solidcraft#1866	half a slot (r 3, centres 14 apart; the segment before the axis edge comes back to the axis along an arc) revolved 90 deg about its centreline	analytic	pass
sweeps/2005-closed-sweep-twisted-cut-inside-a-torus	tangency-labs/solidcraft#2005 tangency-labs/solidcraft#2010	an 8 x 8 square swept a full turn round a circle of radius 30 with a 180 degree twist, cut from a torus (R 30, r 8) that holds it (no result, or minutes)	analytic	pass
sweeps/2005-closed-sweep-twisted-new-body	tangency-labs/solidcraft#2005 tangency-labs/solidcraft#2010	an 8 x 8 square swept a full turn round a circle of radius 30 with a 90 degree twist, as a new body (the sweep that closes on itself)	analytic	pass
sweeps/201-loft-one-guide-rail-cone-frustum	tangency-labs/solidcraft#201 tangency-labs/solidcraft#3371	a loft from a circle of radius 5 to a circle of radius 10, 20 mm above, guided by one straight rail through (5,0,0) and (10,0,20)	analytic	pass
sweeps/2056-rib-grows-along-the-sketch-normal-to-the-part	tangency-labs/solidcraft#2056 tangency-labs/solidcraft#2057	a rib drawn on a plane 20 mm in front of a block (parallel to XZ, a 40 mm line along X) with direction normal, growing toward the block	analytic	pass
sweeps/2183-revolve-profile-crosses-the-axis-refused	tangency-labs/solidcraft#2453 tangency-labs/solidcraft#2183	a rectangle that straddles the revolve axis (x from -5 to 15 about the sketch y axis)	invariants	pass
sweeps/2295-revolve-cut-torus-by-an-overlapping-ring	tangency-labs/solidcraft#2295	a torus (R 10, r 5) cut by a disc of radius 5 centred at (15,0) in the XZ plane revolved about Z (the disc overlaps the torus tube)	analytic	pass
sweeps/2435-loft-rectangular-ring-sections	tangency-labs/solidcraft#2435 tangency-labs/solidcraft#2447	a loft between two rectangular ring sections (a rectangle with a rectangular hole), 24 mm apart, tapering outer 40 x 30 to 28 x 20 and hole 20 x 14 to 12 x 6	analytic	pass
sweeps/2516-revolve-about-a-named-construction-axis	tangency-labs/solidcraft#3796 tangency-labs/solidcraft#3619 tangency-labs/solidcraft#2516	a rectangle revolved about a construction axis picked by name ("unknown sketch line Axis1")	analytic	pass
sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore	tangency-labs/solidcraft#2552	a square-wire coil (diameter 10, section 0.9 inside, pitch 1.5, height 10) cut as a helical groove into the wall of a bore of radius 4.1 in a 30 x 30 x 12 block (crash report: unclean exit in solid.coil)	analytic	HANG: no result after 20 s
sweeps/2570-loft-circle-to-a-non-star-shaped-comb	tangency-labs/solidcraft#2570 tangency-labs/solidcraft#3670	a loft between a circle and a 20-edge comb outline (not star-shaped from its centroid: the teeth turn the vertex directions back on themselves), 40 mm apart (the circle was wound about ten times, the app froze)	invariants	FAIL: step 7 (solid.loft): invalid input: an arc turns more than once
sweeps/2607-revolve-axis-outside-the-sketch-plane-refused	tangency-labs/solidcraft#3736 tangency-labs/solidcraft#2607	a profile on the XZ plane revolved about the world Y axis, which does not lie in the sketch plane	invariants	pass
sweeps/2667-revolve-half-disc-sphere	tangency-labs/solidcraft#2667	a half disc of radius 6 on the axis revolved a full turn (mutation survivor: half_disc area factor)	analytic	pass
sweeps/2667-revolve-half-disc-three-quarters	tangency-labs/solidcraft#2667	the same half disc revolved 270 degrees (mutation survivor: full_circle test of the sweep angle)	analytic	pass
sweeps/2667-sweep-hostile-end-scale-refused	tangency-labs/solidcraft#2667	a sweep with an end scale of 500 (the engine allows 0.01 to 100): the option check (SweepControl::check) must refuse it	invariants	pass
sweeps/271-loft-cut-with-targets-keeps-the-bystander	tangency-labs/solidcraft#271 tangency-labs/solidcraft#286 tangency-labs/solidcraft#299	a loft cut limited by targets to one body while a second body lies inside the loft	analytic	pass
sweeps/2820-pipe-cut-oblique-hole-through-a-block	tangency-labs/solidcraft#2820	a pipe of diameter 6 cut through a 40 x 40 x 20 block along a line leaning 30 degrees from the vertical	analytic	pass
sweeps/2820-pipe-hollow-with-a-wall-along-a-bend	tangency-labs/solidcraft#2820	a hollow pipe (outer diameter 10, wall 2) along a path of two lines joined by a tangent R20 quarter arc	analytic	pass
sweeps/2847-loft-rectangles-turning-through-half-a-turn	tangency-labs/solidcraft#2847 tangency-labs/solidcraft#3452	a loft through 19 identical 6 x 4 rectangles on planes turning about the Z axis every 10 degrees from 0 to 180 degrees, centred 30 mm from the axis (volume came out 6 % of the expected at 180 degrees, no error)	analytic	FAIL: measure Body1: the operation failed: SMLib mass properties: SMLib rejected the input (SM_ERR_INVALID_INPUT) (want measurable); body_count 0 (want 1); volume_mm3 0 (want 2261.946711); bbox.min [null, null, null] (want [-33, 0, -2]); bbox.max [null, null, null] (want [33, 33, 2])
sweeps/2862-three-pipes-meeting-at-one-point	tangency-labs/solidcraft#2862	three pipes of diameter 4.4 and length 20 along +X, +Y and +Z, all ending at the origin, joined (a non-planar tripod junction: kernel panics, then no result)	analytic	pass
sweeps/2891-twisted-sweep-cut-through-a-tube	tangency-labs/solidcraft#2891 tangency-labs/solidcraft#3695	a 20 x 20 square swept 250 mm along the axis of a tube (ID 20, OD 30, 250 long) with a 30 degree twist, cut from it (the twisted cut froze the app)	analytic	pass
sweeps/2947-revolve-300-degrees-intersected-by-a-plate	tangency-labs/solidcraft#2947 tangency-labs/solidcraft#2948	a rectangle section revolved 300 degrees about Z, then intersected with a plate (slab /y/ <= 5) crossing the ring at the start/end gap side and the far side (boolean gave up: "loop not inside any face piece")	analytic	pass
sweeps/3006-second-sweep-from-a-plane-along-a-closed-path	tangency-labs/solidcraft#3006	a circle of radius 3 on a plane at 0.5 of a closed circular path (R 30) swept round it, then a 5 x 5 square on a plane at 0.75 swept round the same path and joined (it did not follow the path)	analytic	FAIL: step 12 (solid.sweep): SMLib sweep: SMLib's check refuses the result: 1 failed tests: SmTrimmingTools::Test #2 UVEdge/UVEdge Gap: too large V Dir gap between lo
sweeps/3088-coil-thread-joined-flush-with-a-cylinder	tangency-labs/solidcraft#3088 tangency-labs/solidcraft#3758	a 4-turn square coil (4 mm wire, pitch 9, outer diameter 30.8, section inside) joined round a cylinder of radius 15 and height 40, its ends flush with the cylinder end faces (hang of several minutes, crash report)	analytic	pass
sweeps/3111-loft-rectangular-ring-to-circular-ring	tangency-labs/solidcraft#3111	a loft from a rectangular ring (two nested rectangles) to a circular ring (two concentric circles) 30 mm above: a hollow transition piece	invariants	pass
sweeps/3156-revolve-join-end-faces-flush-with-a-face	tangency-labs/solidcraft#3156 tangency-labs/solidcraft#3224	a rectangle revolved plus and minus 90 degrees about an axis in a plate top face: both planar end faces lie in that face and the join needed a tool nudge	analytic	pass
sweeps/3191-revolve-cut-leaves-a-cone	tangency-labs/solidcraft#3911 tangency-labs/solidcraft#3191	a triangle sharing the cylinder side and top rim revolved as a cut to leave a cone (the cut never completed)	analytic	pass
sweeps/3326-loft-20mm-square-to-a-circle	tangency-labs/solidcraft#3326 tangency-labs/solidcraft#3402	a loft from a 20 mm square to a circle of radius 10 offset 20 mm (the loft tool symbol): the loft geometry looked wrong	invariants	pass
sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle	tangency-labs/solidcraft#3345	a 4 x 3 profile drawn at the middle of the bottom line of a closed 60 x 40 rounded-rectangle path (corner radius 8) and swept round the whole path (walls offset, fillets turned the wrong way)	analytic	pass
sweeps/3412-loft-sections-in-one-plane-refused	tangency-labs/solidcraft#3412	a loft through two circles drawn on the same plane (no volume between them; it built a flat zero-volume body and reported success)	invariants	pass
sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner	tangency-labs/solidcraft#3505	the inner side wall of the vertical leg of a mitred swept bar extruded outward by 3 mm (the wall is a B-spline net in a plane, "the selected planar face no longer exists")	analytic	pass
sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam	tangency-labs/solidcraft#3528	a ball of radius 4 centred on the dome of a revolved mushroom cap (azimuth 15 degrees, across an internal seam of the revolved faces), cut from it: removed nearly the whole ball	analytic	pass
sweeps/3541-loft-two-circles-into-a-cone-flipped-plane	tangency-labs/solidcraft#3541	a loft from a circle of radius 8 to a circle of radius 20, 30 mm below it (sections given small first, the small one drawn on a plane turned over (normal pointing down)): "a horizontal narrowing is created" instead of a cone	analytic	pass
sweeps/3541-loft-two-circles-into-a-cone-same-sense	tangency-labs/solidcraft#3541	a loft from a circle of radius 8 to a circle of radius 20, 30 mm below it (sections given small first, the small one drawn on a plane facing the same way): "a horizontal narrowing is created" instead of a cone	analytic	pass
sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder	tangency-labs/solidcraft#3832	a 7-turn coil (centre diameter 80, wire 1 mm, pitch -2 so it winds downward) cut from a cylinder that holds it entirely (boolean Cut: no result)	analytic	pass
sweeps/3862-coil-square-wire-outside-the-diameter	tangency-labs/solidcraft#3862 tangency-labs/solidcraft#3915	a clockwise 5-turn coil of 4 mm square wire placed outside a 40 mm diameter, pitch 8 (the section, position and direction parameters)	analytic	pass
sweeps/3897-sweep-ring-along-a-short-arc-joined-to-a-collar	tangency-labs/solidcraft#3897	a ring profile (radii 79.815 and 78.285) swept along a 22.5 degree arc of radius 94.815 whose start is at the ring centre, joined to a ring-shaped collar under the profile (froze at "Computing")	analytic	CRASH: process exited (signal: 11 (SIGSEGV)) without a result:
sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder	tangency-labs/solidcraft#3936	a loft from the circle on top of a cylinder (r 10, height 15) to a 40 x 30 rectangle 30 mm above, joined to the cylinder (builds as a new body in 2 ms, the join never returns)	invariants	pass
sweeps/396-loft-join-standing-on-a-box-face	tangency-labs/solidcraft#396 tangency-labs/solidcraft#577	a conical loft standing on a box top face, joined to the box (one body reported, two touching shells in the result)	analytic	pass
sweeps/4007-revolve-half-disc-horn-torus-270-degrees	tangency-labs/solidcraft#4007	the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees	analytic	FAIL: step 5 (solid.revolve): SMLib revolve: SMLib's check refuses the result: 2 failed tests: SmSurfOfRevolution::Test #2 Parameterization: Bad GenCurve Anal and NUR
sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face	tangency-labs/solidcraft#4008	a 7 x 21 rectangle 2.6 mm from a block vertical edge revolved as a symmetric 180 degree cut about that edge: both end faces of the tool lie in the block left face (refused as "could not be computed reliably")	analytic	pass
sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern	tangency-labs/solidcraft#4056 tangency-labs/solidcraft#4080	a surface loft between a vertical line on XZ (bow) and a slanted line in the plane x = 100 (stern), bow to stern, guided by a keel rail lying in the bow sketch plane and a sheer rail at z = 20 (refused: "a guide rail crosses section 2's plane")	analytic	pass
sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow	tangency-labs/solidcraft#4056 tangency-labs/solidcraft#4080	a surface loft between a vertical line on XZ (bow) and a slanted line in the plane x = 100 (stern), stern to bow, guided by a keel rail lying in the bow sketch plane and a sheer rail at z = 20 (refused: "a guide rail crosses section 2's plane")	analytic	pass
sweeps/443-loft-intersect-cone-meets-wall-below-top	tangency-labs/solidcraft#443	a cylinder (r 35, h 10) intersected with a conical loft (r 45 at z = -1 to r 33 at z = 11) that crosses its wall 1 mm below the top face (body came back unchanged)	analytic	pass
sweeps/450-revolve-spherical-shell-sketched-off-the-origin	tangency-labs/solidcraft#450 tangency-labs/solidcraft#452	a half ring between two arcs (both radial lines on the axis) revolved a full turn from a sketch plane 10 mm above the origin (volume +34 %)	analytic	pass
sweeps/487-cut-disc-by-revolved-adjacent-profiles	tangency-labs/solidcraft#487 tangency-labs/solidcraft#490	a disc cut by the body made from two adjacent profiles revolved on the axis, around the disc flat end	analytic	pass
sweeps/487-revolve-two-adjacent-profiles-on-the-axis	tangency-labs/solidcraft#487 tangency-labs/solidcraft#490	two rectangles sharing an edge, both resting on the axis, revolved together (zero-area faces along the axis)	analytic	pass
sweeps/494-extrude-the-flange-face-of-a-fresh-revolve	tangency-labs/solidcraft#726 tangency-labs/solidcraft#494 tangency-labs/solidcraft#2114	the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists")	analytic	pass
sweeps/561-extrude-the-end-face-of-a-loft	tangency-labs/solidcraft#561 tangency-labs/solidcraft#677	the small end face of a square-to-square loft (40 mm side to 20 mm over 40 mm) extruded 10 mm (loft faces had no attachable source)	analytic	pass
sweeps/561-extrude-the-end-face-of-a-sweep	tangency-labs/solidcraft#561 tangency-labs/solidcraft#677	the end cap of a mitred swept bar (8 x 5 section, 30 up then 40 across) extruded 6 mm further along the path	analytic	pass
sweeps/561-extrude-the-start-face-of-a-coil	tangency-labs/solidcraft#561 tangency-labs/solidcraft#677	the start face of a 3-turn square-wire coil (4 mm wire, pitch 8, centre diameter 40) extruded 5 mm	analytic	pass
sweeps/726-revolve-full-turn-planar-faces-whole	tangency-labs/solidcraft#726 tangency-labs/solidcraft#1687	a flanged hub profile (six edges, none on the axis) revolved a full turn: the planar faces must come out whole, not as three patches	analytic	pass
sweeps/726-revolve-partial-turn-planar-faces-whole	tangency-labs/solidcraft#726 tangency-labs/solidcraft#1718	the same flanged hub profile revolved 240 degrees: its planar faces (three annular sectors and two end faces) must come out whole	analytic	pass
sweeps/757-surface-loft-ruled-strip-between-two-lines	tangency-labs/solidcraft#757 tangency-labs/solidcraft#847	a surface loft between the line (0,0,0)-(10,0,0) and the line (0,0,20)-(10,6,20): a ruled (bilinear) strip	analytic	pass
sweeps/757-surface-revolve-line-cone-frustum-sheet	tangency-labs/solidcraft#757 tangency-labs/solidcraft#824	a line from (5,0) to (10,20) revolved a full turn into a surface body (a cone frustum wall, no caps)	analytic	pass
sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc	tangency-labs/solidcraft#757 tangency-labs/solidcraft#843	a slanted line (from (20,0,0) to (30,0,10)) swept as a surface round a quarter circle of radius 20 about Z	analytic	pass
sweeps/771-sweep-end-scale-cone-frustum	tangency-labs/solidcraft#771 tangency-labs/solidcraft#1269	a circle of radius 5 swept 30 mm along a straight path with end scale 2	analytic	pass
sweeps/771-sweep-one-guide-rail-cone-frustum	tangency-labs/solidcraft#771 tangency-labs/solidcraft#1806	a circle of radius 5 swept 20 mm up a straight path with one guide rail from its point (5,0,0) to (10,0,20)	analytic	pass
sweeps/771-sweep-two-guide-rails-cone-frustum	tangency-labs/solidcraft#771 tangency-labs/solidcraft#1806	a circle of radius 5 swept 20 mm up a straight path between two guide rails from (5,0,0) to (10,0,20) and from (-5,0,0) to (-10,0,20)	analytic	pass
sweeps/793-coil-cut-by-a-box-above-a-plane	tangency-labs/solidcraft#793	the same coil trimmed flat by cutting away everything above z = 12.5 with a box (trimming a coil to length)	analytic	pass
sweeps/793-coil-split-by-a-plane-across-its-axis	tangency-labs/solidcraft#793	a 6-turn coil (centre diameter 40, wire 2 mm, pitch 4) split by the plane z = 12.5 square to its axis ("boolean Intersect: no result")	analytic	pass
sweeps/844-join-two-overlapping-swept-arc-walls	tangency-labs/solidcraft#844	two swept walls (12 mm thick, 60 mm high) along concentric half circles of radius 50 and 58 turned 90 degrees apart, overlapping in thickness by 4 mm over a quarter turn and sharing the planes z = 0 and z = 60 (join gave an error, minutes, or an open body)	analytic	pass
sweeps/881-loft-zigzag-pleat-vertex-pairing	tangency-labs/solidcraft#881 tangency-labs/solidcraft#956	a ruled loft between two 18-vertex zig-zag sections with the same start vertex and winding, whose first-vertex direction is ambiguous from the section centroid	analytic	pass
sweeps/96-loft-cut-box-sections-pad-first	tangency-labs/solidcraft#122 tangency-labs/solidcraft#96	a loft cut through a 100 x 60 x 30 block from its whole 100 x 60 outline at z = 20 (edges flush with the side faces) down to a 10 x 10 pad in a corner at z = 11, sections given pad first (the cut panicked for one order)	analytic	FAIL: step 8 (solid.loft): SMLib boolean: export: SMLib export: the mapped B-rep does not validate: portable B-rep: an open, wire or vertex shell lies in one region
sweeps/96-loft-cut-box-sections-top-first	tangency-labs/solidcraft#122 tangency-labs/solidcraft#96	a loft cut through a 100 x 60 x 30 block from its whole 100 x 60 outline at z = 20 (edges flush with the side faces) down to a 10 x 10 pad in a corner at z = 11, sections given top first (the cut panicked for one order)	analytic	FAIL: step 8 (solid.loft): SMLib boolean: export: SMLib export: the mapped B-rep does not validate: portable B-rep: an open, wire or vertex shell lies in one region
sweeps/96-shallow-loft-cut-starting-in-the-top-face	tangency-labs/solidcraft#96	a loft cut from a 556.68 x 99 rectangle on the top face of a 900 x 480 x 160 slab down 4 mm to an 80 x 80 square (a kernel panic in healing; the sides are about 0.9 degrees from horizontal)	analytic	pass
sweeps/96-sweep-rectangle-round-a-mitred-corner	tangency-labs/solidcraft#96	an 8 x 5 rectangle swept along a path of a 30 mm vertical line and a 40 mm horizontal line meeting at a sharp corner (walls mitred)	analytic	pass
sweeps/968-loft-hollow-elbow-60deg-5sections	tangency-labs/solidcraft#968 tangency-labs/solidcraft#1084	a bent tube (circles r 30 lofted through 5 sections along an R100 arc turning 60 degrees) with a bore (r 18, sections running 5 mm of arc past both ends) cut out of it: a hollow elbow ("no result" for some section counts, not their neighbours)	analytic	pass
sweeps/968-loft-hollow-elbow-90deg-10sections	tangency-labs/solidcraft#968 tangency-labs/solidcraft#1084	a bent tube (circles r 30 lofted through 10 sections along an R100 arc turning 90 degrees) with a bore (r 18, sections running 5 mm of arc past both ends) cut out of it: a hollow elbow ("no result" for some section counts, not their neighbours)	analytic	pass
tessellation/1263-concave-arc-knife-edge-plate	tangency-labs/solidcraft#1263	a plate with a concave quarter-round wall that meets the back face tangentially at a knife-edge tip (a box and a box less a cylinder, united): its display tessellation used to fail with 'boundary does not lie on the surface' before anything was filleted	analytic	pass
tessellation/1615-crossed-lofted-tubes	tangency-labs/solidcraft#1615 tangency-labs/solidcraft#1653	two lofted tubes that cross and are joined (the bike-frame case): the trimmed loft faces along the intersection curves used to mesh with a flat sheet across the tube and slivers inside it	analytic	pass
tessellation/1648-sphere-touches-box-edge-union	tangency-labs/solidcraft#1648 tangency-labs/solidcraft#1850	a sphere that touches a box's bottom edge at one point: the union leaves a sliver face pinched to zero height, whose loop touches itself within tolerance, and it must still mesh	analytic	pass
tessellation/1666-loft-18-gon-ruled-sides	tangency-labs/solidcraft#1666 tangency-labs/solidcraft#1670	a loft between two 18-vertex polylines whose side faces are twisted ruled (bilinear) patches: each used to be exported as two flat triangles with crossing diagonals	analytic	pass
tessellation/1666-loft-twisted-square	tangency-labs/solidcraft#1666 tangency-labs/solidcraft#1670	a loft from a 20x20 square to the same square turned 45 degrees, 30 mm higher: its four side faces are strongly twisted ruled patches, the case a two-triangle mesh gets visibly wrong	analytic	pass
tessellation/1753-bowl-rim-cut-by-cylinder	tangency-labs/solidcraft#1753	a revolved bowl whose rim is cut by a large cylinder (R320, axis across the bowl): the cut edge is an intersection curve between the cylinder and the cone walls, whose two faces used to put different vertices on it, so the STL/3MF export had a 0.001 mm crack	analytic	pass
tessellation/1813-sphere-lens-thinner-than-tolerance	tangency-labs/solidcraft#2712 tangency-labs/solidcraft#1813	a sphere whose centre lies on a box's top face, poking out of the box's side as a lens-shaped face thinner than the mesh tolerance; the face must still be meshed	analytic	pass
tessellation/2069-chamfered-ring-notch-moved-far	tangency-labs/solidcraft#2069	a 210-degree ring with a chamfered outer edge, notched through its chamfer cone and then moved 1000 mm: where the notch meets the cone the mesh used to leave a crack, and the measured volume then grew with the distance from the origin	analytic	pass
tessellation/2528-stadium-joined-with-overlapping-cylinder	tangency-labs/solidcraft#2528	a rounded slot (a box with a half-cylinder on each end) joined with a cylinder that overlaps one end: the cylinder walls meet along vertical seams and intersection edges, where wedge-shaped mis-tessellated facets showed up	analytic	pass
tessellation/311-ramp-cut-cylinder-blank	tangency-labs/solidcraft#311	an inclined cut across a round blank, which used to pinch the cylindrical wall inward (a 4.4 mm chord deficit) in the display and STL mesh	analytic	pass
tessellation/466-revolved-cone-tip-stays-smooth	tangency-labs/solidcraft#466	a six-line profile revolved a full turn about its first line, with a cone ending in a point: the tip came out with dents every 120 degrees instead of a smooth cone (rebuilt as a pencil-like profile with a collinear frustum and tip; the original design is not in the report)	analytic	pass
tessellation/784-stl-open-edges-filleted-and-drilled	tangency-labs/solidcraft#784 tangency-labs/solidcraft#811	two bodies whose STL export used to have open edges where faces were meshed apart: a 40x30x20 box with all twelve edges rounded 2 mm, and a cylinder R15 x 20 with a coaxial 6 mm bore	analytic	pass
tessellation/818-blind-hole-splits-vertical-edges	tangency-labs/solidcraft#818	a blind hole cut into a ring whose six concave corners are filleted: the cut used to split every vertical edge (the outer seam and all twelve fillet tangent edges) at the hole's depth, and the fillet corners drew black	analytic	FAIL: edges 42 (want 40)
tessellation/819-cup-pocket-splits-wall-seam	tangency-labs/solidcraft#819 tangency-labs/solidcraft#921	a disc with a pocket that splits the outer cylinder wall's seam edges at the pocket floor: the wall used to be meshed with fans cutting through the disc, so the measured volume and the STL read too small	analytic	pass
threads/1250-external-m10x1.5-shaft-full-length	tangency-labs/solidcraft#1250	a modelled external M10 thread over the whole length of a 10 mm shaft (8 turns)	analytic	pass
threads/1395-long-external-m6-thread-24-turns	tangency-labs/solidcraft#1395	a long modelled external thread: M6 over a 24 mm shaft (24 turns), the kind that once ran out of depth in the boolean	analytic	pass
threads/1443-m5x0.7-thread-in-5mm-hole	tangency-labs/solidcraft#1443 tangency-labs/solidcraft#3060 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853	a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole	analytic	pass
threads/1995-m8x1-thread-in-7mm-hole	tangency-labs/solidcraft#1995	an M8x1 modelled thread in a 7 mm hole through a block (the report: the thread also changed the block's outer surface and made too many faces)	analytic	pass
threads/2038-cut-threaded-stud-from-bored-block	tangency-labs/solidcraft#2038	cutting an externally threaded stud out of a block bored at the tap drill (to make the internal thread): the boolean found no result	analytic	FAIL: step 5 (solid.combine): SMLib boolean: operation: SMLib failed (status 1001)
threads/2038-internal-then-external-thread-on-one-body	tangency-labs/solidcraft#2038	two modelled threads on one body, an internal one then an external one (the second was refused: no cylindrical face there to thread)	analytic	pass
threads/2038-join-two-threaded-bodies	tangency-labs/solidcraft#2038	joining a body with an internal modelled thread to one with an external modelled thread, touching in a plane (the join ran for over ten minutes)	analytic	pass
threads/2115-tapped-hole-drill-is-major-minus-pitch	tangency-labs/solidcraft#3311 tangency-labs/solidcraft#2115 tangency-labs/solidcraft#2367 tangency-labs/solidcraft#2440 tangency-labs/solidcraft#2441	tapped holes (Hole with a thread size, no diameter) are drilled at the tap drill, not at the major diameter	analytic	pass
threads/2152-m3x0.2-thread-in-3mm-hole	tangency-labs/solidcraft#2152 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853	a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole	analytic	pass
threads/2193-modelled-m33x3.5-thread	tangency-labs/solidcraft#2193 tangency-labs/solidcraft#2263 tangency-labs/solidcraft#4153	a modelled M33x3.5 thread, a size the thread menu lacked (designation typed by hand), on a 33 mm shaft (4 turns)	analytic	pass
threads/2209-fine-m44x1-thread-on-shaft	tangency-labs/solidcraft#2209	a fine modelled thread on a large shaft (M44x1 on a 44 mm shaft, 4 turns), which once cut about 9% too much	analytic	pass
threads/2209-m44x1.5-thread-on-flange-hub	tangency-labs/solidcraft#2209	a full-diameter M44x1.5 modelled thread on the hub of a flange, which once failed to rebuild a closed shell	analytic	pass
threads/2369-m8-thread-in-6.3mm-hole-refused	tangency-labs/solidcraft#2369 tangency-labs/solidcraft#2688 tangency-labs/solidcraft#2853 tangency-labs/solidcraft#1018	a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole	analytic	pass
threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole	tangency-labs/solidcraft#2406	an M8 modelled thread in a 6.8 mm pilot hole (the case where the thread 'was not visible')	analytic	pass
threads/2526-three-modelled-threads-in-one-body	tangency-labs/solidcraft#2526	three modelled threads, internal and external, in one body with a hub and a plain hole beside the bore (each thread used to facet the rest of the part and the next thread was refused)	analytic	pass
threads/2705-m14-thread-on-14.6mm-shaft-refused	tangency-labs/solidcraft#2705 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853	a modelled thread on a shaft that isn't the thread's size: refused with the size to use, never a silent change of the shaft	analytic	pass
threads/2822-modelled-thread-in-filleted-cube	tangency-labs/solidcraft#2822	a modelled M3 thread in a hole through a block whose vertical edges are rounded (the fillets showed as black lines after the thread)	analytic	pass
threads/2969-m48x0.75-thread-in-48mm-hole	tangency-labs/solidcraft#2969 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853	a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole	analytic	pass
threads/3311-two-tapped-holes-both-modelled-threaded	tangency-labs/solidcraft#3311	a second modelled thread on the same body (the first thread faceted every other hole), over each hole's full length	analytic	pass
threads/3366-m20-thread-in-20mm-hole	tangency-labs/solidcraft#3366 tangency-labs/solidcraft#3367 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853	a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole	analytic	pass
threads/3368-faceted-prism-pocket-cut-and-boss-join	tangency-labs/solidcraft#3368	booleans of a finely faceted body (a 1200-sided prism, 1202 flat faces, the kind of body a modelled thread leaves) with box tools: they must finish in bounded time with the exact result, not run for minutes	analytic	pass
threads/3368-faceted-prism-with-bore-and-cross-hole	tangency-labs/solidcraft#3368	a finely faceted body (a 1200-sided prism) with a curved partner: a vertical bore and a horizontal cross hole drilled through it (the case where the B-rep ladder is bounded but must still decide)	analytic	pass
threads/3368-two-faceted-prisms-cut-then-joined	tangency-labs/solidcraft#3368	two finely faceted bodies (1000-sided prisms, flat faces only): a faceted stud cut out of a faceted disc, then a faceted cap joined on top touching in a plane; both booleans must finish in bounded time with the exact result	analytic	HANG: no result after 20 s
threads/3914-sketch-on-top-face-of-threaded-rounded-block	tangency-labs/solidcraft#3914	Create Sketch on the top face of a block with a modelled thread and rounded corners, then a boss from it	analytic	HANG: no result after 20 s
threads/3952-modelled-thread-in-blind-hole-of-revolved-ring	tangency-labs/solidcraft#3952	a modelled thread in a small blind hole drilled into a revolved ring, off its axis ('faceted boolean: inconsistent volumes')	analytic	pass
threads/4149-internal-thread-below-counterbore-filleted-rim	tangency-labs/solidcraft#4149	a modelled M10x1.5 internal thread, full length of the bore below a counterbore, in a cylinder with its rim rounded (stack overflow)	analytic	FAIL: step 4 (solid.thread): an M10 thread does not fit a 8.50 mm shaft
threads/602-fillet-hex-head-beside-modelled-thread	tangency-labs/solidcraft#602 tangency-labs/solidcraft#618	rounding the top edges of a hex head on a shaft with a modelled thread (it froze the app)	analytic	FAIL: step 9 (solid.thread): SMLib boolean: operation: SMLib failed (status 1001)
threads/995-m5-thread-in-5mm-hole	tangency-labs/solidcraft#995 tangency-labs/solidcraft#1018 tangency-labs/solidcraft#2853	a modelled thread on a hole that isn't the thread's size: refused with the size to use, never a silent change of the hole	analytic	pass

Sources

Source	Cases
tangency-labs/solidcraft#1008	fillets/1008-fillet-tray-floor-and-three-of-four-corners
tangency-labs/solidcraft#1018	threads/1443-m5x0.7-thread-in-5mm-hole, threads/2152-m3x0.2-thread-in-3mm-hole, threads/2369-m8-thread-in-6.3mm-hole-refused, threads/2705-m14-thread-on-14.6mm-shaft-refused, threads/2969-m48x0.75-thread-in-48mm-hole, threads/3366-m20-thread-in-20mm-hole, threads/995-m5-thread-in-5mm-hole
tangency-labs/solidcraft#1040	sheet-metal/1040-convert-a-1200-mm-strip-1-mm-thick, sheet-metal/1040-convert-a-990-mm-strip-keeps-its-1-mm-hole
tangency-labs/solidcraft#1067	fillets/814-chamfer-hex-hole-corners
tangency-labs/solidcraft#1080	fillets/1080-chamfer-beside-openings-fits, fillets/1080-chamfer-runs-into-openings-refused
tangency-labs/solidcraft#1084	sweeps/968-loft-hollow-elbow-60deg-5sections, sweeps/968-loft-hollow-elbow-90deg-10sections
tangency-labs/solidcraft#1092	sheet-metal/1092-convert-a-channel-with-its-bends-modelled, sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius, sheet-metal/1092-convert-an-engraved-plate
tangency-labs/solidcraft#1093	sweeps/1093-circular-pattern-of-a-lofted-join-blade
tangency-labs/solidcraft#1095	sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend
tangency-labs/solidcraft#1107	booleans/1107-join-hollow-hub-with-nine-blades, sweeps/1093-circular-pattern-of-a-lofted-join-blade
tangency-labs/solidcraft#1124	fillets/1080-chamfer-beside-openings-fits, fillets/1080-chamfer-runs-into-openings-refused
tangency-labs/solidcraft#114	booleans/114-extrude-join-on-curved-body-coincident-wall
tangency-labs/solidcraft#1140	booleans/1140-hollow-lofted-tube-cut-in-half-and-joined, sweeps/1140-loft-hollow-tube-bands-halved-and-joined
tangency-labs/solidcraft#1184	sweeps/1184-loft-ring-sections-keep-the-hole
tangency-labs/solidcraft#1191	fillets/1191-fillet-both-rims-of-a-tube-top
tangency-labs/solidcraft#1195	booleans/1195-text-cut-into-plate
tangency-labs/solidcraft#12	shell/12-offset-one-split-face-piece
tangency-labs/solidcraft#1207	fillets/1207-fillet-concave-arc-at-boss, fillets/1207-fillet-straight-edge-ending-on-boss
tangency-labs/solidcraft#1213	fillets/1213-round-end-circle-of-bent-tube
tangency-labs/solidcraft#1219	crashes/1219-bore-fillet-then-grooves-cut
tangency-labs/solidcraft#122	sweeps/96-loft-cut-box-sections-pad-first, sweeps/96-loft-cut-box-sections-top-first
tangency-labs/solidcraft#1232	sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief
tangency-labs/solidcraft#1250	threads/1250-external-m10x1.5-shaft-full-length
tangency-labs/solidcraft#1254	sweeps/1184-loft-ring-sections-keep-the-hole
tangency-labs/solidcraft#1262	fillets/1262-fillet-boss-bottom-arc
tangency-labs/solidcraft#1263	tessellation/1263-concave-arc-knife-edge-plate
tangency-labs/solidcraft#1269	sweeps/1269-sweep-parallel-orientation-oblique-cylinder, sweeps/1269-sweep-twisted-square-ninety-degrees, sweeps/771-sweep-end-scale-cone-frustum
tangency-labs/solidcraft#1279	booleans/1279-cut-with-tool-cylinder-coaxial-with-hole
tangency-labs/solidcraft#1280	sheet-metal/1280-hole-square-to-a-45-degree-flange
tangency-labs/solidcraft#1285	sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge, sheet-metal/725-convert-a-shelled-tray-and-unfold-it
tangency-labs/solidcraft#1291	fillets/1213-round-end-circle-of-bent-tube
tangency-labs/solidcraft#1294	fillets/851-fillet-three-edges-at-knife-edge-arc-corner
tangency-labs/solidcraft#1295	sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece
tangency-labs/solidcraft#13	booleans/13-split-body-by-a-plane
tangency-labs/solidcraft#1311	sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees
tangency-labs/solidcraft#1314	sheet-metal/1092-convert-a-channel-with-its-bends-modelled, sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius, sheet-metal/1092-convert-an-engraved-plate
tangency-labs/solidcraft#1338	sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece
tangency-labs/solidcraft#1340	sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge, sheet-metal/725-convert-a-shelled-tray-and-unfold-it
tangency-labs/solidcraft#1355	booleans/1355-concentric-hole-through-drilled-recess
tangency-labs/solidcraft#1390	fillets/1390-chamfer-hole-rim-touching-bottom
tangency-labs/solidcraft#1391	sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg, sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg
tangency-labs/solidcraft#1395	threads/1395-long-external-m6-thread-24-turns
tangency-labs/solidcraft#140	crashes/140-join-pad-hanging-past-the-edge
tangency-labs/solidcraft#1411	sweeps/1411-coil-intersected-with-a-cylinder-holding-it
tangency-labs/solidcraft#1428	fillets/1390-chamfer-hole-rim-touching-bottom
tangency-labs/solidcraft#1443	threads/1443-m5x0.7-thread-in-5mm-hole
tangency-labs/solidcraft#1481	sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief
tangency-labs/solidcraft#1488	fillets/1488-fillet-slab-end-after-nudged-loft-join
tangency-labs/solidcraft#1490	sweeps/1490-loft-joined-into-a-window-of-a-wall-that-it-overhangs
tangency-labs/solidcraft#1494	shell/1494-shell-box-with-cylinder-on-edge-line
tangency-labs/solidcraft#1517	fillets/1488-fillet-slab-end-after-nudged-loft-join
tangency-labs/solidcraft#1525	shell/1525-shell-box-with-rounds-chamfer-and-fillet
tangency-labs/solidcraft#1556	sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-20deg, sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg
tangency-labs/solidcraft#1557	fillets/1557-fillet-vertical-corners-after-bottom-rounds
tangency-labs/solidcraft#1559	crashes/3685-delete-fillet-face-beside-seam
tangency-labs/solidcraft#1574	fillets/1390-chamfer-hole-rim-touching-bottom
tangency-labs/solidcraft#1581	fillets/1557-fillet-vertical-corners-after-bottom-rounds
tangency-labs/solidcraft#1615	tessellation/1615-crossed-lofted-tubes
tangency-labs/solidcraft#1647	booleans/1647-box-cylinder-general-intersect
tangency-labs/solidcraft#1648	tessellation/1648-sphere-touches-box-edge-union
tangency-labs/solidcraft#1649	booleans/1649-crossing-cylinders-union-far-from-origin
tangency-labs/solidcraft#1653	tessellation/1615-crossed-lofted-tubes
tangency-labs/solidcraft#1666	sweeps/1666-loft-zigzag-to-flat-rectangle, tessellation/1666-loft-18-gon-ruled-sides, tessellation/1666-loft-twisted-square
tangency-labs/solidcraft#1667	fillets/1667-fillet-rim-line-beside-quarter-turns
tangency-labs/solidcraft#1668	fillets/1668-fillet-both-sides-of-thin-wall
tangency-labs/solidcraft#1669	sweeps/1669-mirrored-window-and-loft-on-a-hollow-case
tangency-labs/solidcraft#1670	tessellation/1666-loft-18-gon-ruled-sides, tessellation/1666-loft-twisted-square
tangency-labs/solidcraft#168	booleans/168-rim-touching-coin-along-a-circle-only, booleans/3841-join-touching-along-one-circle-only
tangency-labs/solidcraft#1687	sweeps/726-revolve-full-turn-planar-faces-whole
tangency-labs/solidcraft#1702	fillets/1667-fillet-rim-line-beside-quarter-turns
tangency-labs/solidcraft#1717	booleans/1717-two-overlapping-sphere-cuts
tangency-labs/solidcraft#1718	sweeps/726-revolve-partial-turn-planar-faces-whole
tangency-labs/solidcraft#1720	fillets/1668-fillet-both-sides-of-thin-wall
tangency-labs/solidcraft#1721	import/1721-closed-bspline-tube-face
tangency-labs/solidcraft#1730	booleans/1730-cut-short-of-far-face-keeps-skin
tangency-labs/solidcraft#1736	booleans/1355-concentric-hole-through-drilled-recess
tangency-labs/solidcraft#1753	tessellation/1753-bowl-rim-cut-by-cylinder
tangency-labs/solidcraft#1765	booleans/1858-shallow-cuts-after-earlier-pocket
tangency-labs/solidcraft#1797	sheet-metal/1797-tray-with-torn-corners-at-72-degrees-folded, sheet-metal/416-round-hole-and-slanted-slot-across-a-bend, sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners
tangency-labs/solidcraft#1799	sheet-metal/1797-tray-with-torn-corners-at-72-degrees-folded, sheet-metal/416-round-hole-and-slanted-slot-across-a-bend, sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners
tangency-labs/solidcraft#1806	sweeps/771-sweep-one-guide-rail-cone-frustum, sweeps/771-sweep-two-guide-rails-cone-frustum
tangency-labs/solidcraft#1813	tessellation/1813-sphere-lens-thinner-than-tolerance
tangency-labs/solidcraft#1850	tessellation/1648-sphere-touches-box-edge-union
tangency-labs/solidcraft#1853	sweeps/1853-revolve-cut-half-a-slot-about-its-centreline
tangency-labs/solidcraft#1856	sweeps/1856-disk-and-36-twisted-lofted-blades-joined
tangency-labs/solidcraft#1858	booleans/1858-shallow-cuts-after-earlier-pocket
tangency-labs/solidcraft#1865	booleans/1865-tube-and-sector-meeting-along-cylinder-walls, booleans/1910-coaxial-cylinders-intersect
tangency-labs/solidcraft#1866	sweeps/1853-revolve-cut-half-a-slot-about-its-centreline, sweeps/1866-revolve-half-slot-profile-180, sweeps/1866-revolve-half-slot-profile-90
tangency-labs/solidcraft#1885	fillets/324-fillet-over-hole-overlap
tangency-labs/solidcraft#190	fillets/190-fillet-rim-as-tall-as-wall
tangency-labs/solidcraft#1910	booleans/1865-tube-and-sector-meeting-along-cylinder-walls, booleans/1910-coaxial-cylinders-intersect
tangency-labs/solidcraft#1927	booleans/1927-delete-pocket-face-restores-plate
tangency-labs/solidcraft#193	fillets/193-paste-copies-the-fillets
tangency-labs/solidcraft#1949	booleans/1949-extrude-side-drawn-in-collinear-pieces, booleans/1949-tapered-extrude-side-in-collinear-pieces, booleans/2564-joined-side-run-wrapping-past-loop-start
tangency-labs/solidcraft#1972	shell/1972-shell-one-half-sphere-leaves-the-other
tangency-labs/solidcraft#1974	import/2043-outer-bound-opposing-surface-sense
tangency-labs/solidcraft#1979	sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet
tangency-labs/solidcraft#1980	sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet
tangency-labs/solidcraft#1983	booleans/1865-tube-and-sector-meeting-along-cylinder-walls
tangency-labs/solidcraft#1984	booleans/1984-near-coaxial-pin-overlaps-bore-wall, booleans/1984-rivet-with-flush-heads-a-hair-off-its-hole
tangency-labs/solidcraft#1985	crashes/1985-step-export-enclosure-screw-hole, crashes/2243-step-export-flanged-enclosure
tangency-labs/solidcraft#1986	booleans/2008-coaxial-cylinders-join-one-wall, fillets/1986-chamfer-arc-edge-of-joined-sectors
tangency-labs/solidcraft#199	fillets/199-fillet-uses-up-end-face
tangency-labs/solidcraft#1995	threads/1995-m8x1-thread-in-7mm-hole
tangency-labs/solidcraft#2003	booleans/2003-mirror-feature-join-flush-with-mirror-plane
tangency-labs/solidcraft#2005	sweeps/2005-closed-sweep-twisted-cut-inside-a-torus, sweeps/2005-closed-sweep-twisted-new-body
tangency-labs/solidcraft#2008	booleans/2008-coaxial-cylinders-join-one-wall
tangency-labs/solidcraft#201	sweeps/201-loft-one-guide-rail-cone-frustum
tangency-labs/solidcraft#2010	sweeps/2005-closed-sweep-twisted-cut-inside-a-torus, sweeps/2005-closed-sweep-twisted-new-body
tangency-labs/solidcraft#2034	booleans/1865-tube-and-sector-meeting-along-cylinder-walls
tangency-labs/solidcraft#2038	threads/2038-cut-threaded-stud-from-bored-block, threads/2038-internal-then-external-thread-on-one-body, threads/2038-join-two-threaded-bodies
tangency-labs/solidcraft#2043	import/2043-outer-bound-opposing-surface-sense
tangency-labs/solidcraft#2055	booleans/2055-countersink-holes-from-several-sketch-points
tangency-labs/solidcraft#2056	sweeps/2056-rib-grows-along-the-sketch-normal-to-the-part
tangency-labs/solidcraft#2057	sweeps/2056-rib-grows-along-the-sketch-normal-to-the-part
tangency-labs/solidcraft#2069	tessellation/2069-chamfered-ring-notch-moved-far
tangency-labs/solidcraft#2076	booleans/2076-rectangular-pattern-of-cylinder-join
tangency-labs/solidcraft#2114	sweeps/494-extrude-the-flange-face-of-a-fresh-revolve
tangency-labs/solidcraft#2115	threads/2115-tapped-hole-drill-is-major-minus-pitch
tangency-labs/solidcraft#214	fillets/193-paste-copies-the-fillets
tangency-labs/solidcraft#2152	threads/2152-m3x0.2-thread-in-3mm-hole
tangency-labs/solidcraft#2158	booleans/1717-two-overlapping-sphere-cuts
tangency-labs/solidcraft#2183	sweeps/2183-revolve-profile-crosses-the-axis-refused
tangency-labs/solidcraft#219	fillets/219-pattern-of-filleted-pockets
tangency-labs/solidcraft#2193	threads/2193-modelled-m33x3.5-thread
tangency-labs/solidcraft#2209	threads/2209-fine-m44x1-thread-on-shaft, threads/2209-m44x1.5-thread-on-flange-hub
tangency-labs/solidcraft#2243	crashes/1985-step-export-enclosure-screw-hole, crashes/2243-step-export-flanged-enclosure
tangency-labs/solidcraft#2263	threads/2193-modelled-m33x3.5-thread
tangency-labs/solidcraft#2295	sweeps/2295-revolve-cut-torus-by-an-overlapping-ring
tangency-labs/solidcraft#2341	fillets/2341-pattern-of-chamfered-bosses
tangency-labs/solidcraft#2342	fillets/2341-pattern-of-chamfered-bosses
tangency-labs/solidcraft#2357	crashes/2357-join-ring-of-90-cylinder-segments
tangency-labs/solidcraft#2367	threads/2115-tapped-hole-drill-is-major-minus-pitch
tangency-labs/solidcraft#2369	threads/2369-m8-thread-in-6.3mm-hole-refused
tangency-labs/solidcraft#237	fillets/237-fillet-concave-edge-between-two-cylinders
tangency-labs/solidcraft#238	fillets/237-fillet-concave-edge-between-two-cylinders
tangency-labs/solidcraft#2406	threads/2406-modelled-m8-thread-in-6.8mm-pilot-hole
tangency-labs/solidcraft#2435	sweeps/1184-loft-ring-sections-keep-the-hole, sweeps/2435-loft-rectangular-ring-sections
tangency-labs/solidcraft#2440	threads/2115-tapped-hole-drill-is-major-minus-pitch
tangency-labs/solidcraft#2441	threads/2115-tapped-hole-drill-is-major-minus-pitch
tangency-labs/solidcraft#2447	sweeps/1184-loft-ring-sections-keep-the-hole, sweeps/2435-loft-rectangular-ring-sections
tangency-labs/solidcraft#2453	sweeps/2183-revolve-profile-crosses-the-axis-refused
tangency-labs/solidcraft#2464	booleans/2464-extrude-join-leaves-hidden-body-alone
tangency-labs/solidcraft#2465	booleans/2464-extrude-join-leaves-hidden-body-alone
tangency-labs/solidcraft#2498	fillets/2498-fillet-tiny-end-edges-rounded-rectangle
tangency-labs/solidcraft#2506	fillets/2498-fillet-tiny-end-edges-rounded-rectangle
tangency-labs/solidcraft#2516	sweeps/2516-revolve-about-a-named-construction-axis
tangency-labs/solidcraft#2524	booleans/2524-circular-pattern-of-bore-cut
tangency-labs/solidcraft#2526	threads/2526-three-modelled-threads-in-one-body
tangency-labs/solidcraft#2528	tessellation/2528-stadium-joined-with-overlapping-cylinder
tangency-labs/solidcraft#2531	shell/2531-shell-point-pick-after-parameter-edit
tangency-labs/solidcraft#2552	sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore
tangency-labs/solidcraft#2564	booleans/2564-joined-side-run-wrapping-past-loop-start
tangency-labs/solidcraft#2570	sweeps/2570-loft-circle-to-a-non-star-shaped-comb
tangency-labs/solidcraft#2579	booleans/2580-clip-round-small-hole-of-long-plate
tangency-labs/solidcraft#258	import/258-cone-point-vertex, import/258-cone-to-point, import/258-tiny-pin
tangency-labs/solidcraft#2580	booleans/2580-clip-round-small-hole-of-long-plate
tangency-labs/solidcraft#2583	booleans/2583-taper-side-drawn-in-collinear-pieces
tangency-labs/solidcraft#2601	booleans/2601-taper-with-start-offset
tangency-labs/solidcraft#2607	sweeps/2607-revolve-axis-outside-the-sketch-plane-refused
tangency-labs/solidcraft#262	sheet-metal/262-fold-a-tab-just-inside-its-root, sheet-metal/262-fold-at-a-tab-root-refused
tangency-labs/solidcraft#264	sheet-metal/264-fold-one-of-two-collinear-tabs, sheet-metal/264-one-fold-across-two-collinear-tabs
tangency-labs/solidcraft#2667	sweeps/2667-revolve-half-disc-sphere, sweeps/2667-revolve-half-disc-three-quarters, sweeps/2667-sweep-hostile-end-scale-refused
tangency-labs/solidcraft#2672	fillets/2672-chamfer-one-pick-large-plate
tangency-labs/solidcraft#2688	threads/2369-m8-thread-in-6.3mm-hole-refused
tangency-labs/solidcraft#2705	threads/2705-m14-thread-on-14.6mm-shaft-refused
tangency-labs/solidcraft#2708	fillets/2708-fillet-curvature-continuous-angled-ends
tangency-labs/solidcraft#271	sweeps/271-loft-cut-with-targets-keeps-the-bystander
tangency-labs/solidcraft#2712	tessellation/1813-sphere-lens-thinner-than-tolerance
tangency-labs/solidcraft#2719	fillets/2719-chamfer-as-wide-as-corner-round
tangency-labs/solidcraft#2739	fillets/2708-fillet-curvature-continuous-angled-ends
tangency-labs/solidcraft#2752	fillets/2752-fillet-rim-of-flat-cut-on-sphere
tangency-labs/solidcraft#2754	booleans/2754-taper-extrude-line-arc-corner
tangency-labs/solidcraft#2755	booleans/2755-mirror-copy-keeps-seed-targets, booleans/2755-pattern-copies-keep-seed-targets
tangency-labs/solidcraft#277	sheet-metal/262-fold-a-tab-just-inside-its-root, sheet-metal/262-fold-at-a-tab-root-refused
tangency-labs/solidcraft#2774	fillets/2341-pattern-of-chamfered-bosses
tangency-labs/solidcraft#2775	fillets/2341-pattern-of-chamfered-bosses
tangency-labs/solidcraft#2787	fillets/2752-fillet-rim-of-flat-cut-on-sphere
tangency-labs/solidcraft#279	sheet-metal/264-fold-one-of-two-collinear-tabs
tangency-labs/solidcraft#2797	fillets/2797-chamfer-two-distances-circular-rim
tangency-labs/solidcraft#2801	booleans/2801-prism-edge-in-round-cornered-slab-end-face
tangency-labs/solidcraft#2810	booleans/2810-taper-extrude-arcs-meeting-at-corners
tangency-labs/solidcraft#2811	fillets/2811-fillet-rib-roots
tangency-labs/solidcraft#2813	booleans/2810-taper-extrude-arcs-meeting-at-corners
tangency-labs/solidcraft#2820	sweeps/2820-pipe-cut-oblique-hole-through-a-block, sweeps/2820-pipe-hollow-with-a-wall-along-a-bend
tangency-labs/solidcraft#2822	threads/2822-modelled-thread-in-filleted-cube
tangency-labs/solidcraft#2826	booleans/2826-cut-up-to-face-leaves-no-skin
tangency-labs/solidcraft#2827	booleans/2826-cut-up-to-face-leaves-no-skin
tangency-labs/solidcraft#2844	booleans/3092-ring-on-perforated-plate, booleans/3887-ring-standing-on-perforated-plate
tangency-labs/solidcraft#2847	sweeps/2847-loft-rectangles-turning-through-half-a-turn
tangency-labs/solidcraft#2852	fillets/2852-fillet-outer-round-concentric-with-inner
tangency-labs/solidcraft#2853	threads/1443-m5x0.7-thread-in-5mm-hole, threads/2152-m3x0.2-thread-in-3mm-hole, threads/2369-m8-thread-in-6.3mm-hole-refused, threads/2705-m14-thread-on-14.6mm-shaft-refused, threads/2969-m48x0.75-thread-in-48mm-hole, threads/3366-m20-thread-in-20mm-hole, threads/995-m5-thread-in-5mm-hole
tangency-labs/solidcraft#286	sweeps/271-loft-cut-with-targets-keeps-the-bystander
tangency-labs/solidcraft#2862	sweeps/2862-three-pipes-meeting-at-one-point
tangency-labs/solidcraft#2891	sweeps/2891-twisted-sweep-cut-through-a-tube
tangency-labs/solidcraft#2893	fillets/2797-chamfer-two-distances-circular-rim
tangency-labs/solidcraft#2896	booleans/2896-join-arm-end-into-ring-wall, booleans/2896-join-arm-end-near-ring-wall-gap
tangency-labs/solidcraft#2904	booleans/2904-countersunk-hole-with-distant-body
tangency-labs/solidcraft#2907	fillets/2907-chamfer-two-end-outlines-rounded-top
tangency-labs/solidcraft#2928	booleans/2928-join-cap-touching-lips-with-offset-walls
tangency-labs/solidcraft#2939	shell/2939-offset-face-sphere
tangency-labs/solidcraft#2947	sweeps/2947-revolve-300-degrees-intersected-by-a-plate
tangency-labs/solidcraft#2948	sweeps/2947-revolve-300-degrees-intersected-by-a-plate
tangency-labs/solidcraft#296	sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges
tangency-labs/solidcraft#2963	booleans/3327-cut-ending-flush-with-side-wall
tangency-labs/solidcraft#2969	threads/2969-m48x0.75-thread-in-48mm-hole
tangency-labs/solidcraft#2979	booleans/3447-split-along-plane-of-a-face
tangency-labs/solidcraft#299	sweeps/271-loft-cut-with-targets-keeps-the-bystander
tangency-labs/solidcraft#2990	shell/3669-shell-lofted-square-frustum
tangency-labs/solidcraft#2992	crashes/2992-join-disk-and-36-twisted-loft-blades, sweeps/1856-disk-and-36-twisted-lofted-blades-joined
tangency-labs/solidcraft#3006	sweeps/3006-second-sweep-from-a-plane-along-a-closed-path
tangency-labs/solidcraft#3027	booleans/3027-pin-seated-line-to-line-in-bore
tangency-labs/solidcraft#3060	threads/1443-m5x0.7-thread-in-5mm-hole
tangency-labs/solidcraft#3062	booleans/3485-boss-joined-on-rod-top-keeps-side-whole
tangency-labs/solidcraft#307	booleans/307-tangent-hole-contacts-ring-against-grid
tangency-labs/solidcraft#3078	sheet-metal/3078-flange-on-the-side-edge-of-a-flange
tangency-labs/solidcraft#308	booleans/308-blind-cut-ending-inside-a-cylinder
tangency-labs/solidcraft#3088	sweeps/3088-coil-thread-joined-flush-with-a-cylinder
tangency-labs/solidcraft#3092	booleans/3092-ring-on-perforated-plate
tangency-labs/solidcraft#3098	import/3098-bspline-edges-over-tiny-knot-span
tangency-labs/solidcraft#3103	shell/3103-shell-tapered-cylinder
tangency-labs/solidcraft#311	tessellation/311-ramp-cut-cylinder-blank
tangency-labs/solidcraft#3111	sweeps/3111-loft-rectangular-ring-to-circular-ring
tangency-labs/solidcraft#3120	import/3208-extruded-ellipse-face-over-parameter-seam
tangency-labs/solidcraft#3156	sweeps/3156-revolve-join-end-faces-flush-with-a-face
tangency-labs/solidcraft#317	fillets/199-fillet-uses-up-end-face
tangency-labs/solidcraft#3175	booleans/3175-cut-beside-sealed-void
tangency-labs/solidcraft#318	fillets/190-fillet-rim-as-tall-as-wall
tangency-labs/solidcraft#3191	sweeps/3191-revolve-cut-leaves-a-cone
tangency-labs/solidcraft#3208	import/3208-extruded-ellipse-face-over-parameter-seam
tangency-labs/solidcraft#3224	sweeps/3156-revolve-join-end-faces-flush-with-a-face
tangency-labs/solidcraft#3234	sheet-metal/3234-edge-flange-on-the-bend-line-refused
tangency-labs/solidcraft#324	fillets/324-fillet-over-hole-overlap
tangency-labs/solidcraft#3243	booleans/3243-rim-and-rounded-tooth-join
tangency-labs/solidcraft#3273	sheet-metal/3234-edge-flange-on-the-bend-line-refused
tangency-labs/solidcraft#3274	sheet-metal/3078-flange-on-the-side-edge-of-a-flange
tangency-labs/solidcraft#3276	fillets/3276-chamfer-edge-of-1mm-protrusion-on-joined-l
tangency-labs/solidcraft#3280	sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs
tangency-labs/solidcraft#3283	shell/3283-offset-face-cylinder-wall
tangency-labs/solidcraft#3295	fillets/2672-chamfer-one-pick-large-plate
tangency-labs/solidcraft#3300	fillets/2797-chamfer-two-distances-circular-rim
tangency-labs/solidcraft#3303	booleans/3303-inward-cut-of-frustum-top-face
tangency-labs/solidcraft#3309	booleans/3303-inward-cut-of-frustum-top-face
tangency-labs/solidcraft#3311	threads/2115-tapped-hole-drill-is-major-minus-pitch, threads/3311-two-tapped-holes-both-modelled-threaded
tangency-labs/solidcraft#3316	sheet-metal/3316-convert-a-plate-keeps-its-place
tangency-labs/solidcraft#3324	sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet
tangency-labs/solidcraft#3325	sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet
tangency-labs/solidcraft#3326	sweeps/3326-loft-20mm-square-to-a-circle
tangency-labs/solidcraft#3327	booleans/3327-cut-ending-flush-with-side-wall
tangency-labs/solidcraft#334	fillets/334-fillet-top-outline-after-concave-rounds
tangency-labs/solidcraft#3345	sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle
tangency-labs/solidcraft#335	fillets/334-fillet-top-outline-after-concave-rounds
tangency-labs/solidcraft#3351	import/3352-vertex-off-its-edge-curve
tangency-labs/solidcraft#3352	import/3352-vertex-off-its-edge-curve
tangency-labs/solidcraft#3353	sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern
tangency-labs/solidcraft#3354	sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern
tangency-labs/solidcraft#3358	import/3359-iges-trim-pieces-written-end-to-start
tangency-labs/solidcraft#3359	import/3359-iges-trim-pieces-written-end-to-start
tangency-labs/solidcraft#3366	threads/3366-m20-thread-in-20mm-hole
tangency-labs/solidcraft#3367	threads/3366-m20-thread-in-20mm-hole
tangency-labs/solidcraft#3368	threads/3368-faceted-prism-pocket-cut-and-boss-join, threads/3368-faceted-prism-with-bore-and-cross-hole, threads/3368-two-faceted-prisms-cut-then-joined
tangency-labs/solidcraft#3369	fillets/3369-fillet-edge-ends-on-tangent-seam
tangency-labs/solidcraft#3371	sweeps/201-loft-one-guide-rail-cone-frustum
tangency-labs/solidcraft#3378	booleans/3378-circular-pattern-of-join-that-merged-targets
tangency-labs/solidcraft#3379	booleans/3379-circular-pattern-of-thin-spoke-on-ring, booleans/3612-circular-pattern-of-spoke-tangent-to-hub
tangency-labs/solidcraft#3383	booleans/3383-combine-tool-into-rotated-occurrence
tangency-labs/solidcraft#3402	sweeps/3326-loft-20mm-square-to-a-circle
tangency-labs/solidcraft#3412	sweeps/3412-loft-sections-in-one-plane-refused
tangency-labs/solidcraft#3417	sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs
tangency-labs/solidcraft#3418	sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet
tangency-labs/solidcraft#3421	sheet-metal/3417-rhombus-with-a-flange-on-each-edge-and-square-reliefs
tangency-labs/solidcraft#3425	booleans/3782-emboss-on-cylinder-pick-on-far-half
tangency-labs/solidcraft#3435	fillets/3435-fillet-larger-than-top-ring
tangency-labs/solidcraft#3441	fillets/3435-fillet-larger-than-top-ring
tangency-labs/solidcraft#3447	booleans/3447-split-along-plane-of-a-face
tangency-labs/solidcraft#3452	sweeps/2847-loft-rectangles-turning-through-half-a-turn
tangency-labs/solidcraft#3455	booleans/3455-join-of-64-separate-pegs
tangency-labs/solidcraft#3456	booleans/3456-deep-cut-through-drilled-taper-leaves-base, booleans/3497-collinear-cylinders-partial-height-intersection, booleans/3497-pin-overlapping-bore-by-20-microns
tangency-labs/solidcraft#3460	booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs
tangency-labs/solidcraft#3468	shell/3468-offset-face-boss-wall-next-to-fillet
tangency-labs/solidcraft#3485	booleans/3485-boss-joined-on-rod-top-keeps-side-whole
tangency-labs/solidcraft#349	sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-72-degrees, sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees
tangency-labs/solidcraft#3497	booleans/3456-deep-cut-through-drilled-taper-leaves-base, booleans/3497-collinear-cylinders-partial-height-intersection, booleans/3497-pin-overlapping-bore-by-20-microns
tangency-labs/solidcraft#3505	sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner
tangency-labs/solidcraft#3506	shell/3506-split-body-then-shell-both-halves
tangency-labs/solidcraft#3526	booleans/3526-intersect-keeps-every-lump
tangency-labs/solidcraft#3528	sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam
tangency-labs/solidcraft#3540	crashes/3540-cut-with-coincident-cylinder-face
tangency-labs/solidcraft#3541	sweeps/3541-loft-two-circles-into-a-cone-flipped-plane, sweeps/3541-loft-two-circles-into-a-cone-same-sense
tangency-labs/solidcraft#355	sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges
tangency-labs/solidcraft#3573	shell/3576-shell-tapered-box-rounded-corners
tangency-labs/solidcraft#3576	shell/3576-shell-tapered-box-rounded-corners
tangency-labs/solidcraft#3604	booleans/3604-cut-with-g2-swept-tool-along-projected-edge
tangency-labs/solidcraft#3612	booleans/3612-circular-pattern-of-spoke-tangent-to-hub
tangency-labs/solidcraft#3613	booleans/3604-cut-with-g2-swept-tool-along-projected-edge
tangency-labs/solidcraft#3619	sweeps/2516-revolve-about-a-named-construction-axis
tangency-labs/solidcraft#363	fillets/193-paste-copies-the-fillets
tangency-labs/solidcraft#3633	booleans/3633-sphere-intersect-pyramid-apex-at-centre
tangency-labs/solidcraft#3650	shell/3283-offset-face-cylinder-wall
tangency-labs/solidcraft#3652	booleans/3652-mirror-of-a-mirror-feature
tangency-labs/solidcraft#3655	fillets/3655-chamfer-edge-order-box
tangency-labs/solidcraft#3660	fillets/3655-chamfer-edge-order-box
tangency-labs/solidcraft#3665	booleans/3665-join-extrude-column-on-floor-and-curved-walls
tangency-labs/solidcraft#3666	booleans/3665-join-extrude-column-on-floor-and-curved-walls
tangency-labs/solidcraft#3669	shell/3669-shell-lofted-square-frustum
tangency-labs/solidcraft#3670	sweeps/2570-loft-circle-to-a-non-star-shaped-comb
tangency-labs/solidcraft#3671	booleans/3671-intersect-tool-in-top-face-beside-rib
tangency-labs/solidcraft#3682	booleans/3633-sphere-intersect-pyramid-apex-at-centre
tangency-labs/solidcraft#3685	crashes/3685-delete-fillet-face-beside-seam
tangency-labs/solidcraft#3695	sweeps/2891-twisted-sweep-cut-through-a-tube
tangency-labs/solidcraft#3702	booleans/3702-board-in-cavity-of-filleted-rim-case
tangency-labs/solidcraft#3703	booleans/3703-two-face-extrudes-join-keep-the-step
tangency-labs/solidcraft#3729	booleans/3729-extrude-to-point-on-step-edge
tangency-labs/solidcraft#3730	import/3730-void-oriented-shell-false
tangency-labs/solidcraft#3736	sweeps/2607-revolve-axis-outside-the-sketch-plane-refused
tangency-labs/solidcraft#3741	booleans/3850-cross-cut-touching-round-side, booleans/3850-hole-through-wall-after-cross-cut
tangency-labs/solidcraft#3753	fillets/3753-circular-pattern-of-hole-and-its-rim-chamfer
tangency-labs/solidcraft#3758	sweeps/3088-coil-thread-joined-flush-with-a-cylinder
tangency-labs/solidcraft#3779	fillets/3779-chamfer-all-spline-spans, fillets/3779-fillet-all-spline-spans
tangency-labs/solidcraft#3782	booleans/3782-emboss-on-cylinder-pick-on-far-half
tangency-labs/solidcraft#3796	sweeps/2516-revolve-about-a-named-construction-axis
tangency-labs/solidcraft#3804	fillets/3779-chamfer-all-spline-spans, fillets/3779-fillet-all-spline-spans
tangency-labs/solidcraft#3806	import/3806-iges-revolved-arc-spherical-cap-dome
tangency-labs/solidcraft#3813	import/3806-iges-revolved-arc-spherical-cap-dome
tangency-labs/solidcraft#3816	booleans/3816-circular-pattern-of-body-about-offset-axis
tangency-labs/solidcraft#3830	booleans/3830-split-cup-by-extended-spline-surface
tangency-labs/solidcraft#3832	sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder
tangency-labs/solidcraft#3841	booleans/3841-join-touching-along-one-circle-only
tangency-labs/solidcraft#3845	import/3845-iges-trim-pieces-miss-by-a-gap
tangency-labs/solidcraft#3846	import/3845-iges-trim-pieces-miss-by-a-gap
tangency-labs/solidcraft#3850	booleans/3850-cross-cut-touching-round-side, booleans/3850-hole-through-wall-after-cross-cut
tangency-labs/solidcraft#3861	fillets/2907-chamfer-two-end-outlines-rounded-top
tangency-labs/solidcraft#3862	sweeps/3862-coil-square-wire-outside-the-diameter
tangency-labs/solidcraft#3868	fillets/3868-chamfer-concave-edge-adds-material
tangency-labs/solidcraft#3871	import/3871-cone-base-circle-with-vertex-loop, import/3871-cone-bounded-only-by-its-base-circle
tangency-labs/solidcraft#3872	import/3730-void-oriented-shell-false
tangency-labs/solidcraft#3880	import/1721-closed-bspline-tube-face, import/3871-cone-bounded-only-by-its-base-circle, import/3880-cylinder-seam-edge, import/3880-nurbs-hemisphere-dome
tangency-labs/solidcraft#3885	import/3886-iges-bspline-curve-over-tiny-knot-span
tangency-labs/solidcraft#3886	import/3886-iges-bspline-curve-over-tiny-knot-span
tangency-labs/solidcraft#3887	booleans/3887-ring-standing-on-perforated-plate
tangency-labs/solidcraft#3888	booleans/3526-intersect-keeps-every-lump
tangency-labs/solidcraft#3893	shell/745-offset-face-on-body-with-distant-freeform-boss, shell/745-offset-face-then-cut-boss-away
tangency-labs/solidcraft#3897	sweeps/3897-sweep-ring-along-a-short-arc-joined-to-a-collar
tangency-labs/solidcraft#3898	shell/3468-offset-face-boss-wall-next-to-fillet
tangency-labs/solidcraft#3901	import/3871-cone-base-circle-with-vertex-loop, import/3871-cone-bounded-only-by-its-base-circle
tangency-labs/solidcraft#391	shell/391-deboss-text-on-flange-of-filleted-shelled-body
tangency-labs/solidcraft#3911	sweeps/3191-revolve-cut-leaves-a-cone
tangency-labs/solidcraft#3912	import/3912-iges-hole-trim-first-piece-reversed, import/3913-iges-trim-curve-first-piece-reversed
tangency-labs/solidcraft#3913	import/3913-iges-trim-curve-first-piece-reversed
tangency-labs/solidcraft#3914	threads/3914-sketch-on-top-face-of-threaded-rounded-block
tangency-labs/solidcraft#3915	sweeps/3862-coil-square-wire-outside-the-diameter
tangency-labs/solidcraft#3922	fillets/3369-fillet-edge-ends-on-tangent-seam
tangency-labs/solidcraft#3928	import/3972-iges-two-separate-closed-boxes
tangency-labs/solidcraft#3936	sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder
tangency-labs/solidcraft#3952	threads/3952-modelled-thread-in-blind-hole-of-revolved-ring
tangency-labs/solidcraft#396	sweeps/396-loft-join-standing-on-a-box-face
tangency-labs/solidcraft#3963	import/3963-closed-spline-edge-vertex-past-start
tangency-labs/solidcraft#3968	booleans/3968-hole-as-wide-as-a-cones-top
tangency-labs/solidcraft#3972	import/3972-iges-two-separate-closed-boxes
tangency-labs/solidcraft#4005	import/4005-cylinder-written-as-near-zero-cone
tangency-labs/solidcraft#4006	import/4006-plane-written-as-cone-of-nearly-right-angle
tangency-labs/solidcraft#4007	sweeps/4007-revolve-half-disc-horn-torus-270-degrees
tangency-labs/solidcraft#4008	booleans/4008-symmetric-revolve-cut-ends-in-side-face, sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face
tangency-labs/solidcraft#4009	shell/4009-closed-shell-internal-void
tangency-labs/solidcraft#4010	shell/4010-shell-open-at-through-hole-wall
tangency-labs/solidcraft#4011	booleans/4011-mirror-of-cut-under-wall
tangency-labs/solidcraft#405	sheet-metal/405-tray-with-72-degree-flanges-folded, sheet-metal/405-unfold-a-tray-with-72-degree-flanges
tangency-labs/solidcraft#4055	fillets/4055-chamfer-bar-edge-over-joined-pin
tangency-labs/solidcraft#4056	sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern, sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow
tangency-labs/solidcraft#4058	booleans/4058-walls-joined-flush-round-a-floor
tangency-labs/solidcraft#4059	booleans/4058-walls-joined-flush-round-a-floor
tangency-labs/solidcraft#406	sheet-metal/405-tray-with-72-degree-flanges-folded, sheet-metal/405-unfold-a-tray-with-72-degree-flanges
tangency-labs/solidcraft#4080	sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern, sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow
tangency-labs/solidcraft#4092	crashes/4092-loft-ribs-rounded-pad-union-panics, crashes/4092-loft-ribs-rounded-pad-union-reduced
tangency-labs/solidcraft#4095	booleans/4095-slab-cut-standing-off-a-bore-r10, booleans/4095-slab-cut-standing-off-a-bore-r15
tangency-labs/solidcraft#4101	fillets/4101-chamfer-tapered-plug-corners
tangency-labs/solidcraft#4141	fillets/4141-fillet-corner-after-wedge-cut-beside-bspline
tangency-labs/solidcraft#4143	fillets/4143-fillet-notch-rim-on-bspline-ramp
tangency-labs/solidcraft#4149	threads/4149-internal-thread-below-counterbore-filleted-rim
tangency-labs/solidcraft#4153	threads/2193-modelled-m33x3.5-thread
tangency-labs/solidcraft#416	sheet-metal/416-round-hole-and-slanted-slot-across-a-bend
tangency-labs/solidcraft#423	booleans/423-through-all-cut-must-not-reach-behind-sketch-plane
tangency-labs/solidcraft#425	sheet-metal/416-round-hole-and-slanted-slot-across-a-bend
tangency-labs/solidcraft#430	sheet-metal/529-a-hundred-slots-and-four-folds
tangency-labs/solidcraft#436	sheet-metal/436-edge-flanges-at-105-and-120-degrees-on-opposite-edges, sheet-metal/436-edge-flanges-with-their-own-height-on-opposite-edges, sheet-metal/436-unfold-a-tray-with-four-angles-and-heights
tangency-labs/solidcraft#443	sweeps/443-loft-intersect-cone-meets-wall-below-top
tangency-labs/solidcraft#447	sheet-metal/436-edge-flanges-at-105-and-120-degrees-on-opposite-edges, sheet-metal/436-edge-flanges-with-their-own-height-on-opposite-edges, sheet-metal/436-unfold-a-tray-with-four-angles-and-heights
tangency-labs/solidcraft#450	sweeps/450-revolve-spherical-shell-sketched-off-the-origin
tangency-labs/solidcraft#451	booleans/451-cut-block-crossing-hollow-sphere-tool, booleans/451-cut-block-inside-hollow-sphere-tool
tangency-labs/solidcraft#452	sweeps/450-revolve-spherical-shell-sketched-off-the-origin
tangency-labs/solidcraft#466	tessellation/466-revolved-cone-tip-stays-smooth
tangency-labs/solidcraft#479	sheet-metal/479-unfold-a-tray-with-round-relieved-corners
tangency-labs/solidcraft#485	fillets/485-fillet-d-prism-top-outline-arc-and-flat
tangency-labs/solidcraft#487	sweeps/487-cut-disc-by-revolved-adjacent-profiles, sweeps/487-revolve-two-adjacent-profiles-on-the-axis
tangency-labs/solidcraft#488	sheet-metal/488-unfold-a-tray-with-square-relieved-corners
tangency-labs/solidcraft#490	sweeps/487-cut-disc-by-revolved-adjacent-profiles, sweeps/487-revolve-two-adjacent-profiles-on-the-axis
tangency-labs/solidcraft#494	sweeps/494-extrude-the-flange-face-of-a-fresh-revolve
tangency-labs/solidcraft#500	booleans/500-coaxial-cylinder-cut-from-thin-disc
tangency-labs/solidcraft#501	sheet-metal/436-unfold-a-tray-with-four-angles-and-heights
tangency-labs/solidcraft#514	sheet-metal/514-refold-an-L-bracket-after-unfolding-it, sheet-metal/514-unfold-an-L-bracket
tangency-labs/solidcraft#529	sheet-metal/529-a-hundred-slots-and-four-folds
tangency-labs/solidcraft#541	sheet-metal/541-box-cut-straight-through-a-flat-sheet
tangency-labs/solidcraft#542	sheet-metal/542-round-hole-in-a-flat-sheet-and-its-flat-pattern
tangency-labs/solidcraft#552	sheet-metal/542-round-hole-in-a-flat-sheet-and-its-flat-pattern
tangency-labs/solidcraft#556	fillets/556-fillet-edge-ending-on-curved-boss
tangency-labs/solidcraft#559	booleans/559-through-hole-into-shelled-box-rim
tangency-labs/solidcraft#560	sheet-metal/560-hole-through-a-sheet-metal-base
tangency-labs/solidcraft#561	sweeps/561-extrude-the-end-face-of-a-loft, sweeps/561-extrude-the-end-face-of-a-sweep, sweeps/561-extrude-the-start-face-of-a-coil
tangency-labs/solidcraft#562	booleans/562-press-pull-floor-beside-rounds
tangency-labs/solidcraft#566	shell/566-shell-swept-bar-with-bend
tangency-labs/solidcraft#570	sheet-metal/570-flange-refuses-thickness-it-would-ignore
tangency-labs/solidcraft#572	sheet-metal/570-flange-refuses-thickness-it-would-ignore
tangency-labs/solidcraft#577	sweeps/396-loft-join-standing-on-a-box-face
tangency-labs/solidcraft#593	sheet-metal/601-return-lip-on-a-flanges-far-edge
tangency-labs/solidcraft#594	sheet-metal/570-flange-refuses-thickness-it-would-ignore
tangency-labs/solidcraft#601	sheet-metal/601-return-lip-on-a-flanges-far-edge
tangency-labs/solidcraft#602	threads/602-fillet-hex-head-beside-modelled-thread
tangency-labs/solidcraft#604	fillets/485-fillet-d-prism-top-outline-arc-and-flat
tangency-labs/solidcraft#613	fillets/193-paste-copies-the-fillets
tangency-labs/solidcraft#618	threads/602-fillet-hex-head-beside-modelled-thread
tangency-labs/solidcraft#634	sheet-metal/634-flange-beside-the-leg-of-an-L-folded, sheet-metal/634-unfold-a-flange-beside-the-leg-of-an-L
tangency-labs/solidcraft#638	sheet-metal/638-fold-both-collinear-tabs-one-after-the-other
tangency-labs/solidcraft#639	sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank
tangency-labs/solidcraft#646	fillets/556-fillet-edge-ending-on-curved-boss
tangency-labs/solidcraft#647	sheet-metal/725-convert-a-shelled-tray-and-unfold-it
tangency-labs/solidcraft#652	sheet-metal/638-fold-both-collinear-tabs-one-after-the-other
tangency-labs/solidcraft#653	sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank
tangency-labs/solidcraft#656	sheet-metal/560-hole-through-a-sheet-metal-base
tangency-labs/solidcraft#659	sheet-metal/659-ellipse-cutout-across-a-bend, sheet-metal/659-ellipse-cutout-in-a-flat-sheet
tangency-labs/solidcraft#677	sweeps/561-extrude-the-end-face-of-a-loft, sweeps/561-extrude-the-end-face-of-a-sweep, sweeps/561-extrude-the-start-face-of-a-coil
tangency-labs/solidcraft#692	sheet-metal/659-ellipse-cutout-across-a-bend, sheet-metal/659-ellipse-cutout-in-a-flat-sheet
tangency-labs/solidcraft#702	sheet-metal/702-flange-along-what-a-cutout-leaves
tangency-labs/solidcraft#723	sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners
tangency-labs/solidcraft#725	sheet-metal/725-convert-a-shelled-tray-and-unfold-it
tangency-labs/solidcraft#726	sweeps/494-extrude-the-flange-face-of-a-fresh-revolve, sweeps/726-revolve-full-turn-planar-faces-whole, sweeps/726-revolve-partial-turn-planar-faces-whole
tangency-labs/solidcraft#745	shell/745-offset-face-on-body-with-distant-freeform-boss, shell/745-offset-face-then-cut-boss-away
tangency-labs/solidcraft#757	sweeps/757-surface-loft-ruled-strip-between-two-lines, sweeps/757-surface-revolve-line-cone-frustum-sheet, sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc
tangency-labs/solidcraft#771	sweeps/771-sweep-end-scale-cone-frustum, sweeps/771-sweep-one-guide-rail-cone-frustum, sweeps/771-sweep-two-guide-rails-cone-frustum
tangency-labs/solidcraft#774	sheet-metal/774-convert-a-plate-with-nine-round-holes
tangency-labs/solidcraft#783	fillets/783-fillet-pick-far-from-any-edge-refused
tangency-labs/solidcraft#784	tessellation/784-stl-open-edges-filleted-and-drilled
tangency-labs/solidcraft#793	sweeps/793-coil-cut-by-a-box-above-a-plane, sweeps/793-coil-split-by-a-plane-across-its-axis
tangency-labs/solidcraft#809	sheet-metal/723-tray-with-torn-corners-folded, sheet-metal/723-unfold-a-tray-with-torn-corners
tangency-labs/solidcraft#811	tessellation/784-stl-open-edges-filleted-and-drilled
tangency-labs/solidcraft#814	fillets/814-chamfer-hex-hole-corners
tangency-labs/solidcraft#818	tessellation/818-blind-hole-splits-vertical-edges
tangency-labs/solidcraft#819	tessellation/819-cup-pocket-splits-wall-seam
tangency-labs/solidcraft#820	fillets/783-fillet-pick-far-from-any-edge-refused
tangency-labs/solidcraft#824	sweeps/757-surface-revolve-line-cone-frustum-sheet
tangency-labs/solidcraft#831	booleans/831-tapered-extrude-d-shape-arc-meets-line, booleans/831-tapered-extrude-text-glyph
tangency-labs/solidcraft#839	sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded
tangency-labs/solidcraft#843	sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc
tangency-labs/solidcraft#844	sweeps/844-join-two-overlapping-swept-arc-walls
tangency-labs/solidcraft#847	sweeps/757-surface-loft-ruled-strip-between-two-lines
tangency-labs/solidcraft#851	fillets/851-fillet-three-edges-at-knife-edge-arc-corner
tangency-labs/solidcraft#854	fillets/851-fillet-three-edges-at-knife-edge-arc-corner
tangency-labs/solidcraft#862	fillets/862-fillet-curvature-continuous-box-edge
tangency-labs/solidcraft#881	sweeps/881-loft-zigzag-pleat-vertex-pairing
tangency-labs/solidcraft#896	fillets/896-fillet-smooth-seam-refused
tangency-labs/solidcraft#921	tessellation/819-cup-pocket-splits-wall-seam
tangency-labs/solidcraft#926	fillets/851-fillet-three-edges-at-knife-edge-arc-corner
tangency-labs/solidcraft#935	fillets/851-fillet-three-edges-at-knife-edge-arc-corner
tangency-labs/solidcraft#936	fillets/896-fillet-smooth-seam-refused
tangency-labs/solidcraft#955	sheet-metal/955-hole-drilled-into-a-sheet-metal-rim
tangency-labs/solidcraft#956	sweeps/881-loft-zigzag-pleat-vertex-pairing
tangency-labs/solidcraft#958	sheet-metal/685-fold-with-the-fixed-point-on-the-top-face
tangency-labs/solidcraft#96	sweeps/96-loft-cut-box-sections-pad-first, sweeps/96-loft-cut-box-sections-top-first, sweeps/96-shallow-loft-cut-starting-in-the-top-face, sweeps/96-sweep-rectangle-round-a-mitred-corner
tangency-labs/solidcraft#963	sheet-metal/638-fold-both-collinear-tabs-one-after-the-other, sheet-metal/639-fold-tab-on-inside-edge-of-an-L-blank
tangency-labs/solidcraft#964	sheet-metal/529-a-hundred-slots-and-four-folds
tangency-labs/solidcraft#968	sweeps/968-loft-hollow-elbow-60deg-5sections, sweeps/968-loft-hollow-elbow-90deg-10sections
tangency-labs/solidcraft#977	sheet-metal/774-convert-a-plate-with-nine-round-holes
tangency-labs/solidcraft#978	sheet-metal/978-edge-flange-beside-a-ledge-as-tall-as-its-setback
tangency-labs/solidcraft#995	threads/995-m5-thread-in-5mm-hole

Coverage by source

Source	Looked at	Became cases	Skipped
PR, not merged	99	22	77
issue or PR, newer than this list	5	1	4
issue, closed	234	102	132
issue, open	827	171	656
kernel-paused PR	55	18	37
merged PR	314	132	182
truck-geometry PR	39	27	12
all	1573	473	1100

Looked at and skipped

booleans

Source	Why skipped
tangency-labs/solidcraft#24	not geometry: a diagnostics/warning feature (report which boolean fallback ran and by how much), no wrong result
tangency-labs/solidcraft#25	test infrastructure (spatial reference comparison), no geometry failure
tangency-labs/solidcraft#141	needs the basin design (a floor of four 0.5 degree facets around a drain with a boss ring, from #119/#126); not attached, no recipe in the issue
tangency-labs/solidcraft#195	sketch.create refusal on a user's face; needs the user's design, no geometry spec
tangency-labs/solidcraft#206	no design attached (a 146-curved-face target); only the join's params and the failure text
tangency-labs/solidcraft#255	performance only, no wrong result
tangency-labs/solidcraft#287	performance only, no wrong result
tangency-labs/solidcraft#291	feature request (integer arithmetic), no geometry case
tangency-labs/solidcraft#331	kernel evaluation or tracking, not a geometry failure
tangency-labs/solidcraft#344	sketch.create refusal on a user's face; needs the user's design, no geometry spec
tangency-labs/solidcraft#367	needs the example plastic enclosure (not attached); only the drilled-hole params and the failure text
tangency-labs/solidcraft#415	sketch.create refusal on two intersecting cylinders plus a feature request; no dimensions to rebuild
tangency-labs/solidcraft#424	other area: threads
tangency-labs/solidcraft#446	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#456	no design attached (cut with a freeform tool from a sketch 'to' a point); only the params and failure text
tangency-labs/solidcraft#458	no design attached: a cut from a sketch that projects the body's top edges; the steps in the report are not enough to rebuild it
tangency-labs/solidcraft#466	other area: tessellation (revolved cone tip shows indentations; the profile coordinates are not given)
tangency-labs/solidcraft#467	no reproduction data (screenshot or video only)
tangency-labs/solidcraft#522	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#586	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#608	no design attached: a second cut onto a face with an existing cut leaving a tiny edge; only the extrude cut's parameters
tangency-labs/solidcraft#611	performance only, no wrong result
tangency-labs/solidcraft#632	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#669	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#746	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#759	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#763	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#767	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#770	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#772	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#823	other area: import (an imported STEP body: 'lumps: nested shells do not alternate material and void'); the file is not attached
tangency-labs/solidcraft#858	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#864	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#873	the hexagon positions 'next to' the screw are not given, so the touching contact cannot be rebuilt faithfully; the report has only the join's params
tangency-labs/solidcraft#887	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#938	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#953	no design attached: a cup with a square on its inside floor; the square's size and position are not given
tangency-labs/solidcraft#967	tracking issue for the Hole tool audit; its open refusals (slanted faces, #559) are covered by the case 559-through-hole-into-shelled-box-rim and the hole matrix; the rest is UI
tangency-labs/solidcraft#987	other area: threads
tangency-labs/solidcraft#990	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#999	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1002	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1008	other area: fillets
tangency-labs/solidcraft#1025	private design not attached (join of 23 cone/cylinder tools); no recipe
tangency-labs/solidcraft#1125	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1126	no design attached: a Draft of a face with non-perpendicular neighbours about a custom neutral plane; only the Draft parameters
tangency-labs/solidcraft#1133	no design attached (a text sketch extruded from another object, tool with 21 freeform faces)
tangency-labs/solidcraft#1137	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1191	other area: fillets
tangency-labs/solidcraft#1202	no reproduction data (screenshot or video only)
tangency-labs/solidcraft#1216	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1225	needs the user's design (extrudecrash.txt attachment): tapered extrude of tangent circles on an existing body; steps not reproducible from the text
tangency-labs/solidcraft#1253	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1308	property-test PR, tests not a failing case
tangency-labs/solidcraft#1317	UI or customization PR, not geometry
tangency-labs/solidcraft#1328	no reproduction data (screenshot or video only)
tangency-labs/solidcraft#1343	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1409	feature request: Emboss on non-planar ('complex') faces; the current refusal is documented, and no geometry or design is given
tangency-labs/solidcraft#1431	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#1436	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1437	extrude join result beyond the sketch; needs the user's design (earlier features not given)
tangency-labs/solidcraft#1440	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1441	no design attached and the report text is empty beyond the feature's parameters
tangency-labs/solidcraft#1451	other area: import (a STEP model from a public site, not attached; join of a 1 mm extrusion refused)
tangency-labs/solidcraft#1466	surface-modelling feature or proposal, not a failing solid operation
tangency-labs/solidcraft#1467	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1471	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1508	sketch projection of solid edges (sketch area), not a kernel failure
tangency-labs/solidcraft#1511	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1531	feature request (partial taper where the sides would cross); the refusal is intended; needs the user's plate
tangency-labs/solidcraft#1552	feature request: sketch entities as Split Body tools; not a wrong result
tangency-labs/solidcraft#1603	other area: sheet-metal
tangency-labs/solidcraft#1662	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1672	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1737	extrude join leaves a gap after a fillet; the base solid is only in a screenshot
tangency-labs/solidcraft#1760	no design attached ('CPR Sensor' split by a construction plane: 'Intersect: no result')
tangency-labs/solidcraft#1788	extra seam edge from a mirrored sketch, marked possibly intentional; no dimensions
tangency-labs/solidcraft#1807	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1834	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1848	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1882	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1891	profiling or tracing tooling, not geometry
tangency-labs/solidcraft#1926	no design attached; a freeze in a symmetric cut, only a screenshot
tangency-labs/solidcraft#1944	empty report: no parameters, no text
tangency-labs/solidcraft#1946	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#1963	empty report: no parameters, no text
tangency-labs/solidcraft#1964	screenshot only, no parameters or text; no recipe
tangency-labs/solidcraft#1965	not a geometry failure: booleans on mesh bodies are refused by design ('a boolean needs a solid body')
tangency-labs/solidcraft#1967	other area: sweeps (loft reported as not working, no details)
tangency-labs/solidcraft#1995	other area: threads
tangency-labs/solidcraft#2048	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2059	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2064	performance only, no wrong result
tangency-labs/solidcraft#2073	not boolean geometry: inspect.hole_stacks (an inspection command for aligned holes), no wrong kernel result
tangency-labs/solidcraft#2074	part library or fastener fill feature, not a failing operation
tangency-labs/solidcraft#2075	not boolean geometry: parts.fasten (assembly fasteners sized to hole stacks)
tangency-labs/solidcraft#2090	not boolean geometry: inspect.clearance measuring (a shared volume against the union), a measurement feature
tangency-labs/solidcraft#2156	clearance/interference measurement of a pin in its bore (inspect.clearance), not a modelling boolean; the facet crossing tolerance is not a right-answer number a recipe can state
tangency-labs/solidcraft#2205	persistent face names (exact history of a prism boolean) only; the solid it gives is already right, so no geometry answer to grade
tangency-labs/solidcraft#2274	part library or fastener fill feature, not a failing operation
tangency-labs/solidcraft#2343	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#2407	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2418	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2428	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#2450	other area: tessellation (Section Analysis shows a white line at the part's edge; display only)
tangency-labs/solidcraft#2454	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2461	other area: sheet metal ('this machining intersects a folded bend or a nonparallel panel')
tangency-labs/solidcraft#2466	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2495	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2497	not boolean geometry: assembly joint relations (parallel, angle, point on plane)
tangency-labs/solidcraft#2503	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2509	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#2522	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2525	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2527	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2534	no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it
tangency-labs/solidcraft#2541	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2543	other area: import (mesh body from an imported file: a boolean needs a solid body, by design)
tangency-labs/solidcraft#2545	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#2551	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2553	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2565	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2566	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2572	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#2574	feature request, not a wrong result (a hexagonal or skip-instance pattern option)
tangency-labs/solidcraft#2581	UI only: no geometry
tangency-labs/solidcraft#2586	needs the user's design: draft refused on faces next to the drafted walls, only the command is reported
tangency-labs/solidcraft#2599	other area: assemblies (joint.as_built does not follow a parameter change), not kernel geometry
tangency-labs/solidcraft#2602	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2610	no description, only a screenshot or nothing: no geometry to rebuild
tangency-labs/solidcraft#2696	CI/test infrastructure only (xtask skips the nightly boolean_props tests), no geometry
tangency-labs/solidcraft#2740	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2750	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2765	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2766	needs the user's design: draft refused on faces next to the drafted walls, only the command is reported
tangency-labs/solidcraft#2768	documentation
tangency-labs/solidcraft#2770	needs the user's design (a 22 KB Gridfinity base shared with the author's permission); not rebuilt or committed
tangency-labs/solidcraft#2783	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2798	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2799	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2803	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2843	UI only: no geometry
tangency-labs/solidcraft#2873	UI/feature request: press-pull on a round face has no selection path; no wrong geometry to grade
tangency-labs/solidcraft#2876	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#2882	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2885	UI: the pattern got a construction axis name the command does not accept; no wrong geometry
tangency-labs/solidcraft#2887	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2890	UI only: no geometry
tangency-labs/solidcraft#2911	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2941	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2946	other area: import (B-spline patch and loosely-fitted imported faces; no small public geometry rebuilt)
tangency-labs/solidcraft#2949	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2950	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2959	UI: selecting the whole sketch line (with its fillet) as a split tool; no wrong geometry
tangency-labs/solidcraft#2965	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2968	UI or customization PR, not geometry
tangency-labs/solidcraft#2970	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2973	no description, only a screenshot or nothing: no geometry to rebuild
tangency-labs/solidcraft#2979	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#2997	no description, only a screenshot or nothing: no geometry to rebuild
tangency-labs/solidcraft#3007	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3013	performance only, no wrong result
tangency-labs/solidcraft#3019	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3026	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3034	UI only: no geometry
tangency-labs/solidcraft#3035	perf only: the motivating design is private, no wrong result
tangency-labs/solidcraft#3038	other area: import (mesh body from an imported file: a boolean needs a solid body, by design)
tangency-labs/solidcraft#3042	UI: no visual feedback when a patterned hole misses the surface; no geometry
tangency-labs/solidcraft#3050	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3051	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3056	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3079	needs the user's design: the sketch loop is not closed, no geometry to rebuild
tangency-labs/solidcraft#3090	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3100	other area: import (split of a body imported from STEP; the file is not available)
tangency-labs/solidcraft#3101	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3104	performance only, no wrong result
tangency-labs/solidcraft#3112	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3117	no description, only a screenshot or nothing: no geometry to rebuild
tangency-labs/solidcraft#3118	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3126	sphere placement UI (centre taken from the picked point); the cut itself is not wrong
tangency-labs/solidcraft#3130	other area: threads
tangency-labs/solidcraft#3132	feature request (pick target bodies in Edit Extrude); no wrong result
tangency-labs/solidcraft#3134	performance only, no wrong result
tangency-labs/solidcraft#3138	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3147	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3149	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3157	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3176	needs the user's design: draft refused on faces next to the drafted walls, only the command is reported
tangency-labs/solidcraft#3185	other area: crashes (a boolean retry hang on a broken candidate; the design from the report is private)
tangency-labs/solidcraft#3192	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3193	no description, only a screenshot or nothing: no geometry to rebuild
tangency-labs/solidcraft#3194	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3205	UI only: no geometry
tangency-labs/solidcraft#3211	no description, only a screenshot or nothing: no geometry to rebuild
tangency-labs/solidcraft#3212	other area: import (an imported assembly, nested shells)
tangency-labs/solidcraft#3226	test layout housekeeping
tangency-labs/solidcraft#3227	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3232	no description or geometry: only that an intersect does not seem to work
tangency-labs/solidcraft#3247	feature request, not a wrong result (a hexagonal or skip-instance pattern option)
tangency-labs/solidcraft#3251	other area: import (mesh body from an imported file: a boolean needs a solid body, by design)
tangency-labs/solidcraft#3255	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3268	profiling or tracing tooling, not geometry
tangency-labs/solidcraft#3271	UI only: no geometry
tangency-labs/solidcraft#3272	fix for #2970 (bore guard in a two-profile join): geometry only in the user's design, no dimensions
tangency-labs/solidcraft#3276	other area: fillets (the failing step is the fillet/chamfer after three extrudes; no dimensions given)
tangency-labs/solidcraft#3279	sketch pattern editing (sketch.pattern.circular), not solid geometry
tangency-labs/solidcraft#3293	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3302	UI: the pattern was started with nothing selected; no geometry
tangency-labs/solidcraft#3324	other area: sheet metal (flat pattern and DXF ignore non-sheet features)
tangency-labs/solidcraft#3374	other area: import (mesh body from an imported file: a boolean needs a solid body, by design)
tangency-labs/solidcraft#3396	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3403	needs the user's design: only the failing command's parameters are reported, no geometry to rebuild
tangency-labs/solidcraft#3404	needs a user's design (plate with a tab profile) that can't be rebuilt: the report names only the failing join extrude
tangency-labs/solidcraft#3405	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3406	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)
tangency-labs/solidcraft#3411	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of three bodies, 'Union: no result')
tangency-labs/solidcraft#3426	UI only: the extrude preview's initial direction on a picked face, no wrong geometry
tangency-labs/solidcraft#3427	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3428	other area: crashes (kernel panic in a cut with an imported STEP bolt; the STEP file is from a parts library and can't be rebuilt)
tangency-labs/solidcraft#3448	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude of two profiles, 'Union: no result', cylinders)
tangency-labs/solidcraft#3450	solid.move pivot/point-to-point selection UI, no geometry failure
tangency-labs/solidcraft#3479	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (rectangular pattern of a chamfer and an extrude: 'no edge near ...')
tangency-labs/solidcraft#3486	solid.move pivot/point-to-point selection UI, no geometry failure
tangency-labs/solidcraft#3496	other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')
tangency-labs/solidcraft#3498	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)
tangency-labs/solidcraft#3514	other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)
tangency-labs/solidcraft#3517	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#3518	needs a user's design that can't be rebuilt synthetically: a plane split (XZ) of one body of a 41-body design, no geometry given; plain plane splits are covered by case 13
tangency-labs/solidcraft#3525	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#3531	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3539	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (thin extrude of a curve, join)
tangency-labs/solidcraft#3547	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (cut through an extruded spline)
tangency-labs/solidcraft#3551	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#3563	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3569	UI or customization PR, not geometry
tangency-labs/solidcraft#3578	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of a revolve with a chamfered box: the description is too vague to rebuild)
tangency-labs/solidcraft#3586	other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)
tangency-labs/solidcraft#3592	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#3594	feature (wrap sketches onto cylinders), not a failing operation
tangency-labs/solidcraft#3598	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (a fake edge left after an extrude chain on a chamfer)
tangency-labs/solidcraft#3602	needs a user's design that can't be rebuilt synthetically: a split by a sketch line (l8 of sketch 9) of one body, the body is not given; plain splits are covered by case 13
tangency-labs/solidcraft#3607	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3608	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (circular pattern of an extrude feature, cut 'no result')
tangency-labs/solidcraft#3632	UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry
tangency-labs/solidcraft#3634	UI only: hole tool auto-switching to multi-hole mode
tangency-labs/solidcraft#3645	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3648	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3649	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude refusing for zero-thickness edge contact; the contact is not described, see #3841 for the circular-edge case)
tangency-labs/solidcraft#3656	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3657	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3667	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3680	other area: sheet metal (a hole in sheet-metal material is refused)
tangency-labs/solidcraft#3707	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3709	no geometry: a video of cutting a bolt in another CAD tool, no model or command
tangency-labs/solidcraft#3725	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3727	UI only: sketch.pattern.circular was run with no sketch being edited
tangency-labs/solidcraft#3732	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (French report: Combine cut keeping the tool gives nothing, parts are named Equerre and Rallonge2)
tangency-labs/solidcraft#3734	not geometry: the failing step is a profile that is not closed in the user's sketch
tangency-labs/solidcraft#3753	other area: fillets (a chamfer inside a circular pattern is too large for the edge, 'grow the part'; the pattern itself is not at fault)
tangency-labs/solidcraft#3756	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#3757	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)
tangency-labs/solidcraft#3767	not geometry: a face lineage refusal ('no supported stable semantic lineage') on a user's body
tangency-labs/solidcraft#3777	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3785	not geometry: feature request (pattern along a closed path around a rounded rectangle)
tangency-labs/solidcraft#3787	other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')
tangency-labs/solidcraft#3789	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3791	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3793	no geometry: a screenshot only, the report gives no command or model
tangency-labs/solidcraft#3803	other area: UI only (pattern of a sketch feature is not offered: 'Sketch2 cannot be patterned')
tangency-labs/solidcraft#3808	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)
tangency-labs/solidcraft#3811	UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})
tangency-labs/solidcraft#3823	not geometry: an expression error (e is not a parameter)
tangency-labs/solidcraft#3824	other area: threads (a threaded hole needs a cylindrical face: 'no cylindrical face there to thread')
tangency-labs/solidcraft#3843	UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})
tangency-labs/solidcraft#3844	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (holes of an extrude cut, flange_thickenss parameter, not visible in the final result)
tangency-labs/solidcraft#3865	UI only: shift-click multiple selection in the Combine dialog
tangency-labs/solidcraft#3866	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)
tangency-labs/solidcraft#3869	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)
tangency-labs/solidcraft#3879	other area: import (the extrude acts on an imported object's orientation / a STEP file's face)
tangency-labs/solidcraft#3900	transform input validation (refuses non-affine matrices); not a geometry failure
tangency-labs/solidcraft#3904	UI only: selecting several non-coplanar profiles in Extrude (which profiles the dialog accepts), no wrong geometry
tangency-labs/solidcraft#3907	performance only, no wrong result
tangency-labs/solidcraft#3926	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut from a face of a user's body)
tangency-labs/solidcraft#3932	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3948	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3961	UI only: should hidden bodies be left out of a cut: a visibility policy, the cut itself is right
tangency-labs/solidcraft#3975	not geometry: feature request (rework of the hole tool's positioning)
tangency-labs/solidcraft#3976	refactor or rollup PR with no behaviour change to grade
tangency-labs/solidcraft#3978	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#3992	kernel evaluation or tracking, not a geometry failure
tangency-labs/solidcraft#3997	kernel evaluation or tracking, not a geometry failure
tangency-labs/solidcraft#4002	construct.plane.three_points selection UI
tangency-labs/solidcraft#4012	kernel evaluation or tracking, not a geometry failure
tangency-labs/solidcraft#4017	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#4024	fill tolerance check in geom, no geometry case
tangency-labs/solidcraft#4036	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#4041	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut 'up to' another body: 'nothing lies between the profile and the To object')
tangency-labs/solidcraft#4042	UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry
tangency-labs/solidcraft#4070	not geometry: hole not created, the report gives only the sketch point id
tangency-labs/solidcraft#4075	needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry
tangency-labs/solidcraft#4077	UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry
tangency-labs/solidcraft#4098	not geometry: documentation of the taper sign (a positive taper makes the walls lean outward); the behaviour is not wrong
tangency-labs/solidcraft#4111	UI only: Press/Pull opens Extrude on a selection with no planar face or profile
tangency-labs/solidcraft#4124	other area: import (the extrude acts on an imported object's orientation / a STEP file's face)
tangency-labs/solidcraft#4148	revolve join 'no result' on a sketch not given in the report; needs the user's design

crashes

Source	Why skipped
tangency-labs/solidcraft#661	truck intersection_curve unwrap in solid.hole at a position on a design only in the reporter's crash folder; no recipe to rebuild
tangency-labs/solidcraft#924	Windows-versus-Linux differences in the robustness goldens; platform float behaviour, no case geometry
tangency-labs/solidcraft#1023	hole hang shown only in a video and a private design file; no recipe to rebuild
tangency-labs/solidcraft#1024	not geometry: Windows heap corruption in the thread unit-test process (dependency/memory bug), and threads are another area (other area: threads)
tangency-labs/solidcraft#1104	truck intersection_curve unwrap in solid.extrude: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically
tangency-labs/solidcraft#1123	unclean exit in solid.extrude after a slot sketch dragged many times: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically
tangency-labs/solidcraft#1147	perf only, no wrong result: 1,300-body design built over MCP is slow in the engine and the UI (fixed by #1148/#1152/#1154/#1158)
tangency-labs/solidcraft#1337	extrude 'to object' on an imported STEP bracket: needs the user's STEP file
tangency-labs/solidcraft#1351	unclean exit in solid.combine after a mirror of an extruded sketch: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically
tangency-labs/solidcraft#1374	other area: tessellation (STEP import meshing runs out of memory on a private 480-solid file; the mesher's curve division)
tangency-labs/solidcraft#1400	other area: tessellation (a far-out boundary parameter spikes a face; meshing takes minutes)
tangency-labs/solidcraft#1411	other area: threads (solid.coil crash, no geometry beyond the command; coil is a helical sweep)
tangency-labs/solidcraft#1597	not geometry: kernel roadmap and contribution guide
tangency-labs/solidcraft#1856	20-tooth lofted helical pinion join is slow: the scripts are only in a downloadable zip (the body gives the join command, not the sketches and lofts); duplicate in spirit of #2992 (case 2992)
tangency-labs/solidcraft#1957	unclean exit in file.export of a bird-house design: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically; the STEP-export hang family is case 1985
tangency-labs/solidcraft#2037	multi-face extrusion preview/OK freeze and failing cut on an imported STEP model: needs the user's STEP file, and a UI/preview responsiveness report
tangency-labs/solidcraft#2038	other area: threads (second modelled thread on one body; join of two faceted threaded bodies)
tangency-labs/solidcraft#2451	other area: threads (solid.thread unclean exit)
tangency-labs/solidcraft#2467	not geometry: renaming a body recomputes the features after it on the window thread (perf/UI only, no wrong result)
tangency-labs/solidcraft#2470	other area: threads (solid.thread stack overflow on a modelled thread)
tangency-labs/solidcraft#2508	other area: tessellation (bound on runaway closing polylines in the mesher); the STEP export hang itself is case 1985
tangency-labs/solidcraft#2552	other area: threads (solid.coil crash, helical sweep cut; no backtrace)
tangency-labs/solidcraft#2570	loft freeze from a design with an arc profile and a non-convex polyline profile that the report does not give; the web build only
tangency-labs/solidcraft#2796	other area: threads (solid.thread unclean exit)
tangency-labs/solidcraft#2891	other area: sweeps (twisted sweep cut through a tube freezes)
tangency-labs/solidcraft#2974	perf only, no wrong result: a counterbored hole pattern is ~8x slower with a joined cylinder elsewhere; results already match hand calculation
tangency-labs/solidcraft#3066	unclean exit in solid.extrude with a parametric sketch (nozL): needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically
tangency-labs/solidcraft#3085	fillet/chamfer crash after combine with an imported STEP body: needs the user's STEP file (and edge selection is UI)
tangency-labs/solidcraft#3088	other area: threads (solid.coil join crash, no backtrace)
tangency-labs/solidcraft#3207	perf only: faster slow unit tests (clearance, inside_index, fill reference), same answers
tangency-labs/solidcraft#3368	other area: threads (finely faceted booleans, repro is a modelled-thread join; thread cases cover it)
tangency-labs/solidcraft#3386	other area: threads (solid.thread unclean exit)
tangency-labs/solidcraft#3410	other area: threads (faceted-boolean stack overflow on a modelled thread, #2470)
tangency-labs/solidcraft#3430	not a kernel operation: unclean exit at startup in the graphics surface configure on macOS
tangency-labs/solidcraft#3473	unclean exit in a 16-fold circular pattern of a cylinder cut driven by parameters: the recipe is only in an attached replay.json, and the issue gives no dimensions
tangency-labs/solidcraft#3695	other area: sweeps (twisted sweep cut through a tube, bounded intersection work)
tangency-labs/solidcraft#3731	perf only, no wrong result: joins onto drafted walls are 20-100x slower than onto vertical ones (results are correct apart from a 4e-4 mm retry displacement); the 67-flute design takes tens of minutes and a one-line recipe can't pin it
tangency-labs/solidcraft#3737	not geometry: UI highlight work on the main thread while orbiting an imported model (edge highlight)
tangency-labs/solidcraft#3745	not geometry: hover highlight of a large thread freezes the UI (fixed by #3766/#3818)
tangency-labs/solidcraft#3818	not geometry: hover highlight of a helical edge (mesh tangent chain), UI freeze fixed, same results
tangency-labs/solidcraft#3892	not geometry: browser tree frame time on a large nested STEP assembly (UI)
tangency-labs/solidcraft#3897	other area: sweeps (ring profile swept along a short arc with Join freezes)
tangency-labs/solidcraft#3962	unclean exit in solid.combine cut on macOS: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically
tangency-labs/solidcraft#4031	spade CDT assertion in solid.extrude of a face with Join: needs the reporter's private design or replay (only a crash report), so it can't be rebuilt synthetically (no geometry given)
tangency-labs/solidcraft#4102	booleans on a FreeCAD-exported STEP are ~15x slower: needs the 104 KB FreeCAD STEP file (written by another CAD, can't be rebuilt by hand), results are correct (perf only)
tangency-labs/solidcraft#4149	other area: threads (solid.thread stack overflow on an internal M10x1.5 modelled thread)

fillets

Source	Why skipped
tangency-labs/solidcraft#9	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#10	meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild
tangency-labs/solidcraft#15	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#29	other area: shell (including the plastic lip on a shelled rim)
tangency-labs/solidcraft#46	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#52	feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source
tangency-labs/solidcraft#58	saddle fillet between two cylinders: volume, area and counts are right and the defect is a 0.05 mm surface deviation from the rolling-ball envelope: needs a surface-deviation grading field the rig lacks (tests/oracle/35 holds the geometry)
tangency-labs/solidcraft#68	other area: booleans
tangency-labs/solidcraft#102	fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form
tangency-labs/solidcraft#108	fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form
tangency-labs/solidcraft#109	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#121	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#132	feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source
tangency-labs/solidcraft#215	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be perpendicular to the edge" are recorded, no geometry to rebuild
tangency-labs/solidcraft#293	feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81
tangency-labs/solidcraft#311	other area: tessellation
tangency-labs/solidcraft#362	fillets/chamfers ending at angled faces and sloped pocket rims (#215, tapered pockets): fixtures are not in the source and the removed volume has no simple closed form
tangency-labs/solidcraft#388	feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81
tangency-labs/solidcraft#391	other area: booleans
tangency-labs/solidcraft#397	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the ends of the edges must be square to them (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#404	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#431	fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame)
tangency-labs/solidcraft#438	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the ends of the edges must be square to them (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#477	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#493	sketch attachment to cut walls and chamfer faces: sketch plane selection, not blend geometry
tangency-labs/solidcraft#612	other area: import (STEP export of fillet faces as B-splines)
tangency-labs/solidcraft#618	other area: threads
tangency-labs/solidcraft#625	sketch attachment to cut walls and chamfer faces: sketch plane selection, not blend geometry
tangency-labs/solidcraft#675	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#691	auto-filed from a private design: only the pick points and the error "not supported yet: degenerate rolling-ball spine" are recorded, no geometry to rebuild
tangency-labs/solidcraft#749	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#752	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#764	surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer
tangency-labs/solidcraft#769	surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer
tangency-labs/solidcraft#775	topological naming after a timeline edit (shell thickness changed): fillet picks follow, no solid geometry of its own
tangency-labs/solidcraft#776	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#777	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#789	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#796	other area: tessellation
tangency-labs/solidcraft#810	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#811	other area: tessellation
tangency-labs/solidcraft#818	other area: booleans
tangency-labs/solidcraft#827	other area: booleans
tangency-labs/solidcraft#828	auto-filed from a private design: only the pick points and the error "not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#855	variable, chord, tapered and spline-radius fillets: reference cases already exist in tests/oracle (77 to 81), and the setback corner type is a feature request
tangency-labs/solidcraft#882	other area: booleans
tangency-labs/solidcraft#884	fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame)
tangency-labs/solidcraft#903	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#949	fixture is a private design or STEP file not in the source (plate with window and block, battery case, clip frame)
tangency-labs/solidcraft#962	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#978	other area: sheet-metal
tangency-labs/solidcraft#984	auto-filed from a private design: only the pick points and the error "not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#989	auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#992	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#1001	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1026	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1030	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#1039	auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1066	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#1090	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1092	other area: sheet-metal
tangency-labs/solidcraft#1113	other area: tessellation
tangency-labs/solidcraft#1136	feature request or closed feature PR: setback corner patch / bounded endpoint patches for three unequal radii or a lofted basin; no closed form, fixture not in the source
tangency-labs/solidcraft#1176	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1183	other area: booleans
tangency-labs/solidcraft#1198	other area: import (STEP export of fillet faces as B-splines)
tangency-labs/solidcraft#1208	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1219	other area: booleans
tangency-labs/solidcraft#1228	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1249	surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer
tangency-labs/solidcraft#1263	other area: tessellation
tangency-labs/solidcraft#1275	other area: booleans
tangency-labs/solidcraft#1276	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1281	other area: tessellation
tangency-labs/solidcraft#1282	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1293	no longer reproduces; the hinge knuckle cap circle is oracle case 63-hinge-knuckle
tangency-labs/solidcraft#1303	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1314	other area: sheet-metal
tangency-labs/solidcraft#1356	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1370	auto-filed from a private design: only the pick points and the error "not supported yet: a curved seam where the edge chain turns (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1372	chamfer chain ending at two existing bevels: only the removed volume (49.147) is quoted, the U-shaped part is not described
tangency-labs/solidcraft#1384	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1389	auto-filed from a private design: only the pick points and the error "curve blend: could not fit the rolling-ball surface within the accuracy and section limits (the operation failed: not supported yet: only straight edges can be " are recorded, no geometry to rebuild
tangency-labs/solidcraft#1394	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1420	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1421	other area: booleans
tangency-labs/solidcraft#1533	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1535	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#1543	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1553	render interchange (glTF/Blender export), no geometry
tangency-labs/solidcraft#1572	auto-filed from a private design: only the pick points and the error "not supported yet: each end of the edge must touch exactly one more face" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1573	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1597	meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild
tangency-labs/solidcraft#1617	other area: booleans
tangency-labs/solidcraft#1642	surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer
tangency-labs/solidcraft#1684	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#1690	other area: booleans
tangency-labs/solidcraft#1691	other area: booleans
tangency-labs/solidcraft#1692	other area: booleans
tangency-labs/solidcraft#1719	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1728	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1774	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1792	auto-filed from a private design: only the pick points and the error "not supported yet: only straight edges" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1824	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1826	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1854	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#1875	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1876	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1933	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#1940	auto-filed from a private design: only the pick points and the error "not supported yet: seams on both sides of a corner of the edge chain (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1945	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1951	auto-filed from a private design: only the pick points and the error "not supported yet: 10 mm is too large for this chamfer: it runs past the faces beside the edge into other geometry; the largest size that fits is 7.5 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#1955	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces; the largest radius that fits is 4 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2002	feature: the fit option (reduce or taper a radius that is too large) and the suggested radius; the largest radius that fits at an exactly consumed face is a design choice, and the taper law has reference cases in tests/oracle/77-81
tangency-labs/solidcraft#2040	other area: booleans
tangency-labs/solidcraft#2041	other area: booleans
tangency-labs/solidcraft#2042	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2044	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#2051	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2081	auto-filed from a private design: only the pick points and the error "not supported yet: seams on both sides of a corner of the edge chain (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2083	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2116	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2128	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2135	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2170	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2174	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#2189	auto-filed from a private design: only the pick points and the error "curve blend: could not fit the rolling-ball surface within the accuracy and section limits" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2192	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2194	claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild
tangency-labs/solidcraft#2213	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2215	auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2230	auto-filed from a private design: only the pick points and the error "not supported yet: an end face almost along the edge" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2245	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2269	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2296	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2301	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#2318	other area: import (STEP geometry or crashes); the STEP fixture is not in the source
tangency-labs/solidcraft#2320	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#2375	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be planar" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2379	auto-filed from a private design: only the pick points and the error "invalid parameters for sketch.fillet: fillets and chamfers work on two lines" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2383	auto-filed from a private design: only the pick points and the error "invalid input: the edge at [-165.794, 33.018, 10.000] is smooth: the faces on either side meet tangentially there, so there is no corner to chamfer; pick the sh" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2394	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2408	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2420	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2422	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2439	auto-filed from a private design: only the pick points and the error "not supported yet: a fillet larger than the faces next to it; the largest radius that fits is 50.82 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2472	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2477	auto-filed from a private design: only the pick points and the error "not supported yet: chamfers ending at a concave corner" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2485	mitre between separately created bottom rounds plus the upright, R2, on a shelled 40 x 80 x 27 box: the mitre pick is not given and no closed form; the same rounds-meeting-a-mitre geometry is case 1557
tangency-labs/solidcraft#2487	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#2488	surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer
tangency-labs/solidcraft#2490	chamfer of a straight lip at a tangent wall junction: the reconstruction file is not in the source and 20 mm slot, 60 mm extrusion and R60 cut are not enough to rebuild it
tangency-labs/solidcraft#2500	auto-filed from a private design: only the pick points and the error "invalid parameters for sketch.fillet: the radius is too large for that corner (it needs 5.000 mm of each line)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2519	empty report: the body was never filled in, no geometry or error recorded
tangency-labs/solidcraft#2532	empty report: the body was never filled in, no geometry or error recorded
tangency-labs/solidcraft#2533	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2538	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2567	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2573	empty report: the body was never filled in, no geometry or error recorded
tangency-labs/solidcraft#2589	auto-filed from a private design: only the pick points and the error "invalid input: the edge at [6.000, 50.000, 4.000] is smooth: the faces on either side meet tangentially there, so there is no corner to chamfer; pick the sharp " are recorded, no geometry to rebuild
tangency-labs/solidcraft#2591	other area: booleans
tangency-labs/solidcraft#2593	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be planar" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2653	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2654	auto-filed from a private design: only the pick points and the error "not supported yet: only straight edges" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2663	meta: roadmap, mutation coverage or fuzzer report, no single geometry to rebuild
tangency-labs/solidcraft#2686	other area: booleans
tangency-labs/solidcraft#2690	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2692	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2694	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2695	request that a chamfer too large clips instead of erroring (depends on a private design that could not be reproduced); the clipping behaviour is not defined
tangency-labs/solidcraft#2699	report without a reproducible description (picture only or several vague problems)
tangency-labs/solidcraft#2703	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2704	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2706	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be perpendicular to the edge" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2711	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#2771	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2781	auto-filed from a private design: only the pick points and the error "not supported yet: 5.5 mm is too large for this chamfer: the result changes 2557 mm³ of the part, more than the chamfer can (at most 423 mm³)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2784	could not be reproduced on a plain rebuild (cylinder with a shaft; a 10 mm peg chamfers at 1 mm); the private design is needed
tangency-labs/solidcraft#2794	auto-filed from a private design: only the pick points and the error "not supported yet: blending a loop with sharp corners next to arcs" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2800	auto-filed from a private design: only the pick points and the error "not supported yet: 5 mm is too large for this fillet: it runs past the faces beside the edge into other geometry; the largest radius that fits is 4.429 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2822	other area: threads
tangency-labs/solidcraft#2856	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#2874	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2894	right answer is a design choice (refuse, or cut through the faces) for chamfers wider than the faces they join: not gradeable without picking one
tangency-labs/solidcraft#2921	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2966	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2971	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2972	auto-filed from a private design: only the pick points and the error "invalid input: the edge at [0.012, -28.000, 18.000] is smooth: the faces on either side meet tangentially there, so there is no corner to fillet; pick the sharp" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2976	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#2983	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#2986	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#3062	claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild
tangency-labs/solidcraft#3064	auto-filed from a private design: only the pick points and the error "not supported yet: 6 mm is too large for this fillet: it runs past the faces beside the edge into other geometry" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3075	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#3082	auto-filed from a private design: only the pick points and the error "not supported yet: only straight edges" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3085	other area: import (STEP geometry or crashes); the STEP fixture is not in the source
tangency-labs/solidcraft#3091	auto-filed from a private design: only the pick points and the error "not supported yet: 20 mm is too large for this fillet: it runs past the faces beside the edge into other geometry; the largest radius that fits is 19.21 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3106	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#3115	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#3119	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3125	auto-filed from a private design: only the pick points and the error "not supported yet: 1 mm is too large for this chamfer: the result changes 77 mm³ of the part, more than the chamfer can (at most 22 mm³)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3150	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#3169	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#3172	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3179	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#3180	auto-filed from a private design: only the pick points and the error "not supported yet: the blend uses up a neighbouring face with more edges" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3190	curved chain ending across two planar end faces (an L-shaped wall on a plate with slanted sides): fixture not described precisely enough to rebuild, no closed-form volume
tangency-labs/solidcraft#3233	report without a reproducible description (picture only or several vague problems)
tangency-labs/solidcraft#3282	empty report: the body was never filled in, no geometry or error recorded
tangency-labs/solidcraft#3284	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3297	claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild
tangency-labs/solidcraft#3317	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than a corner radius (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3333	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3342	documented limit of G2 fillets (curved or non-perpendicular ends are refused with a clear message): no closed form for the corner blend
tangency-labs/solidcraft#3370	UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369
tangency-labs/solidcraft#3377	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3392	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3398	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3400	UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369
tangency-labs/solidcraft#3401	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3418	other area: sheet-metal
tangency-labs/solidcraft#3436	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3437	UI selection: the dialog's Tangent Chain picked up smooth seam edges and kept them when unticked; the geometry of the slot is case 3369
tangency-labs/solidcraft#3442	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3445	empty template: only a pick and a 20.5 mm distance are recorded, no description or error
tangency-labs/solidcraft#3454	other area: booleans
tangency-labs/solidcraft#3462	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3464	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius that fits is 1 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3465	other area: booleans
tangency-labs/solidcraft#3468	other area: shell (offset face next to a fillet)
tangency-labs/solidcraft#3493	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3501	auto-filed from a private design: only the pick points and the error "not supported yet: the faces at the edge ends must be planar" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3508	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the edge" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3520	auto-filed from a private design: only the pick points and the error "invalid parameters for sketch.fillet: the lines must share a corner point" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3533	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3548	curved chain ending across two planar end faces (an L-shaped wall on a plate with slanted sides): fixture not described precisely enough to rebuild, no closed-form volume
tangency-labs/solidcraft#3549	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#3552	claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild
tangency-labs/solidcraft#3561	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both); the largest radius that fits is 0.075 mm" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3562	auto-filed from a private design: only the pick points and the error "not supported yet: the blend's end on its end face" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3565	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3572	report without a reproducible description (picture only or several vague problems)
tangency-labs/solidcraft#3573	other area: shell (including the plastic lip on a shelled rim)
tangency-labs/solidcraft#3575	private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild)
tangency-labs/solidcraft#3576	other area: shell (including the plastic lip on a shelled rim)
tangency-labs/solidcraft#3587	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is taller than the walls" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3606	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3611	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3630	report without a reproducible description (picture only or several vague problems)
tangency-labs/solidcraft#3644	auto-filed from a private design: only the pick points and the error "invalid parameters for solid.chamfer: no edge at [0.000000000000002136321436930869, -5.9999999999999885, -183]: the nearest edge is 258.940 mm away" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3651	auto-filed from a private design: only the pick points and the error "not supported yet: the blend does not cross the edge between the end faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3684	auto-filed from a private design: only the pick points and the error "not supported yet: the ball doesn't fit along the resampled spine (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3686	auto-filed from a private design: only the pick points and the error "not supported yet: degenerate rolling-ball spine" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3694	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3716	surface modelling (surface.blend and surface fillets, class-A continuity): a different feature, no closed-form right answer
tangency-labs/solidcraft#3721	other area: shell (including the plastic lip on a shelled rim)
tangency-labs/solidcraft#3735	empty report: the body was never filled in, no geometry or error recorded
tangency-labs/solidcraft#3739	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3746	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3747	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#3763	UI only: manipulators, previews, labels, navigation, dialogs or units, no solid geometry
tangency-labs/solidcraft#3842	refactor, performance or bookkeeping change with no geometry of its own (error wording, a size type, an action-matrix baseline)
tangency-labs/solidcraft#3853	other area: sheet-metal
tangency-labs/solidcraft#3854	auto-filed from a private design: only the pick points are recorded (no error text or description), no geometry to rebuild
tangency-labs/solidcraft#3860	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#3864	other area: import (STEP geometry or crashes); the STEP fixture is not in the source
tangency-labs/solidcraft#3898	other area: shell (offset face next to a fillet)
tangency-labs/solidcraft#3908	claim or fix PR whose repro design is not in the source (or could not be reproduced from the text): no geometry to rebuild
tangency-labs/solidcraft#3910	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3943	could not be reproduced on a plain rebuild (cylinder with a shaft; a 10 mm peg chamfers at 1 mm); the private design is needed
tangency-labs/solidcraft#3971	auto-filed from a private design: only the pick points and the error "fillet: the rounds would leave openings in the surface (they overlap where a wall or a face is narrower than both)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#3982	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4027	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4034	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4047	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: only straight edges can be blended)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4066	auto-filed from a private design: only the pick points and the error "not supported yet: 3.5 mm is too large for this chamfer: the result changes 1732 mm³ of the part, more than the chamfer can (at most 328 mm³)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4076	auto-filed from a private design: only the pick points and the error "not supported yet: a blend ending in an earlier round" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4079	auto-filed from a private design: only the pick points and the error "not supported yet: both ends touch the same face" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4083	private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild)
tangency-labs/solidcraft#4097	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#4106	sketch fillet/chamfer (2D sketch editing, constraints and dimensions), not a solid.fillet or solid.chamfer operation: no solid geometry to grade
tangency-labs/solidcraft#4133	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4137	empty report: the body was never filled in, no geometry or error recorded
tangency-labs/solidcraft#4140	private design: only the picks are recorded and the failure depends on picking order or on edges moved by an earlier edit (no geometry to rebuild)
tangency-labs/solidcraft#4145	auto-filed from a private design: only the pick points and the error "not supported yet: a vertex of the edge chain where other faces meet (the operation failed: not supported yet: both faces next to the edge must be planar)" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4157	auto-filed from a private design: only the pick points and the error "not supported yet: the blend is larger than the neighbouring faces" are recorded, no geometry to rebuild
tangency-labs/solidcraft#4160	sketch fillet of two 3D-sketch curves refused ("a must be a line"): 3D sketch, not solid geometry

import

Source	Why skipped
tangency-labs/solidcraft#11	export-only: STEP export merging user-split faces; no import geometry
tangency-labs/solidcraft#14	needs Fusion-written IGES files (commercial CAD output) that can't be rebuilt; the IGES reader's synthetic cases are 3359, 3806, 3845, 3886, 3912, 3913, 3972
tangency-labs/solidcraft#200	feature request (.f3z history import), no geometry
tangency-labs/solidcraft#327	document/file format or storage, not geometry
tangency-labs/solidcraft#461	document/file format or storage, not geometry
tangency-labs/solidcraft#469	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#626	document/file format or storage, not geometry
tangency-labs/solidcraft#688	feature request (FreeCAD .FCStd import), no geometry
tangency-labs/solidcraft#1017	document/file format or storage, not geometry
tangency-labs/solidcraft#1033	performance only (large PCB STEP loads slowly), no wrong result
tangency-labs/solidcraft#1120	UI face selection on an imported STEP, no geometry spec
tangency-labs/solidcraft#1161	feature request (external I/O library), no geometry
tangency-labs/solidcraft#1369	document/file format or storage, not geometry
tangency-labs/solidcraft#1397	CI corpus of real-world files, tolerance-based; not a hand-writable geometry case
tangency-labs/solidcraft#1452	periodic cylinder trim in a two-body STEP; needs the reporter's files, not attached and not rebuildable from the description
tangency-labs/solidcraft#1468	needs the reporter's STEP file (seam artefact in display); looks like tessellation, other area: tessellation
tangency-labs/solidcraft#1600	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#1606	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#1609	metadata/assembly naming of IGES parts, no geometry consequence
tangency-labs/solidcraft#1613	Fusion .f3d exchange provider (closed PR), not geometry
tangency-labs/solidcraft#1626	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#1706	needs the Fusion-written threaded part (wrong coordinates and negative volume); cause unknown, cannot be rebuilt synthetically
tangency-labs/solidcraft#1708	F3D import (editable history), not STEP/IGES geometry
tangency-labs/solidcraft#1709	F3D import (editable history), not STEP/IGES geometry
tangency-labs/solidcraft#1777	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#1783	FreeCAD file refused on a resource budget; needs the reporter's file
tangency-labs/solidcraft#1784	memory use of a 38 MB STEP import; crash/performance, no hand-writable geometry; other area: crashes
tangency-labs/solidcraft#1928	export-only: revolved faces scaled across their axis written as NURBS
tangency-labs/solidcraft#1934	hang on a user's STEP file (gehaeuse82.stp), performance; no synthetic repro
tangency-labs/solidcraft#2052	DXF import, not STEP/IGES
tangency-labs/solidcraft#2127	3MF import, not STEP/IGES
tangency-labs/solidcraft#2579	other area: booleans (divide_face loses a small hole in a large tilted plate)
tangency-labs/solidcraft#2605	SVG import UI, no geometry
tangency-labs/solidcraft#2748	parameter import, no geometry
tangency-labs/solidcraft#2776	parameter import performance, no geometry
tangency-labs/solidcraft#2809	performance only (orientation meshing of periodic faces, minutes per part), no wrong result
tangency-labs/solidcraft#2814	performance only (opening a large assembly takes an hour), no wrong result
tangency-labs/solidcraft#2872	placement after 'stand it up' makes a sketch/extrude land elsewhere: UI/placement, not import geometry; no file to rebuild
tangency-labs/solidcraft#2875	performance only (orient each instanced part once)
tangency-labs/solidcraft#2918	performance/contract tests for repeated instances, no wrong geometry
tangency-labs/solidcraft#2998	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#2999	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#3046	performance only (parallel read of distinct parts)
tangency-labs/solidcraft#3047	performance only (mesh an instanced part once)
tangency-labs/solidcraft#3093	document/file format or storage, not geometry
tangency-labs/solidcraft#3102	document/file format or storage, not geometry
tangency-labs/solidcraft#3108	performance only (STEP load time), no wrong result
tangency-labs/solidcraft#3209	FreeCAD/Rhino import decode caps, not STEP/IGES
tangency-labs/solidcraft#3216	CSV parameter import, no geometry
tangency-labs/solidcraft#3221	design file size limit when saving a large STEP import, not geometry
tangency-labs/solidcraft#3223	UI/placement after 'stand it up' (extrude lands at 90 degrees); no file to rebuild; same class as #2872
tangency-labs/solidcraft#3237	MCP feature request (reverse engineering STEP files), no geometry
tangency-labs/solidcraft#3289	assembly cap/refusal policy for huge assemblies (50,000 instances), needs a huge synthetic assembly and is not a geometry answer
tangency-labs/solidcraft#3394	export-only: STEP export drops cone faces for other readers (fixed by #3557)
tangency-labs/solidcraft#3431	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#3476	document/file format or storage, not geometry
tangency-labs/solidcraft#3537	tolerance persistence across saving a design, not import geometry
tangency-labs/solidcraft#3557	export-only: loop order of merged cone and cylinder faces on STEP export
tangency-labs/solidcraft#3595	performance only (orbit stutter with ~100 bodies)
tangency-labs/solidcraft#3708	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#3713	not geometry (importer coverage, progress UI, export, timing tests or feature request)
tangency-labs/solidcraft#3720	performance only (viewport lag with a 1,163-body assembly)
tangency-labs/solidcraft#3754	document/file format or storage, not geometry
tangency-labs/solidcraft#3784	CI goldens differing on Windows, not an import geometry case
tangency-labs/solidcraft#3847	other area: tessellation (display plans for threads and pointed ends of STEP parts)
tangency-labs/solidcraft#3849	other area: tessellation (display plans for STEP threads and pointed ends)
tangency-labs/solidcraft#3858	3MF import naming, not STEP/IGES geometry
tangency-labs/solidcraft#3859	3MF import naming, not STEP/IGES geometry
tangency-labs/solidcraft#3924	AP242 tessellated parts as mesh bodies: a feature with no graded geometry, and the TRIANGULATED_SURFACE_SET entity layout could not be written reliably from the specification here; needs the tangency-labs/models file
tangency-labs/solidcraft#3925	AP242 tessellated parts as mesh bodies: same as #3924
tangency-labs/solidcraft#3974	refactor PR (STEP geometry as plain data), no behaviour change to grade
tangency-labs/solidcraft#4007	export-only: writer nondeterminism for a revolved horn torus; the reading side would need the collapsed-pole spline of the written file
tangency-labs/solidcraft#4021	performance only (display plans and model cache for large assemblies)
tangency-labs/solidcraft#4086	STEP-import file too large: size limit, no geometry
tangency-labs/solidcraft#4100	component/joint bookkeeping after deleting an inserted STEP, not geometry
tangency-labs/solidcraft#4130	STL opening error with only a screenshot; no file

sheet-metal

Source	Why skipped
tangency-labs/solidcraft#30	profile picks by index, not geometry
tangency-labs/solidcraft#40	sketch projection ids, not geometry
tangency-labs/solidcraft#50	UI only, no geometry (viewport highlight)
tangency-labs/solidcraft#59	the hem's default side is the owner's decision (the oracle case 73-sm-hem fixes it inward); no right answer to grade
tangency-labs/solidcraft#117	profile picks by curves, not geometry
tangency-labs/solidcraft#118	other area: booleans (error messages of a failed boolean)
tangency-labs/solidcraft#271	docs wording only
tangency-labs/solidcraft#286	docs wording only
tangency-labs/solidcraft#299	docs wording only
tangency-labs/solidcraft#390	other area: booleans (a draft on a flange end face)
tangency-labs/solidcraft#391	other area: booleans (a text deboss cut on a filleted and shelled body: boolean Cut, no result)
tangency-labs/solidcraft#470	sketch attachment to a sheet panel, not geometry
tangency-labs/solidcraft#474	sketch attachment to a sheet panel, not geometry
tangency-labs/solidcraft#482	file format note, no geometry
tangency-labs/solidcraft#495	sketch attachment to thickness faces, not geometry
tangency-labs/solidcraft#533	assemblies: inserting a design as a linked component, not geometry
tangency-labs/solidcraft#534	assemblies: an ignored regression test for #533, not geometry
tangency-labs/solidcraft#535	face naming, no geometry
tangency-labs/solidcraft#539	face naming (an ignored regression test), no geometry
tangency-labs/solidcraft#566	other area: shell (a swept bar and sheet metal parts refused by shell)
tangency-labs/solidcraft#602	other area: threads (threads on objects, crash)
tangency-labs/solidcraft#607	the bend table and bend lines after cut-outs: bend table values are not a graded quantity of the rig
tangency-labs/solidcraft#622	UI only, the agent cursor's menus
tangency-labs/solidcraft#677	face attachments of sheet metal features, not geometry
tangency-labs/solidcraft#700	file format and naming, no geometry
tangency-labs/solidcraft#732	perforation: the hole count follows the layout (staggered or square, margins), which has no closed form; the cut budget part is graded in 529-a-hundred-slots-and-four-folds
tangency-labs/solidcraft#758	feature specification for surface.offset, no failing geometry
tangency-labs/solidcraft#888	docs wording only
tangency-labs/solidcraft#889	docs wording only
tangency-labs/solidcraft#893	docs wording only
tangency-labs/solidcraft#894	docs wording only
tangency-labs/solidcraft#956	other area: sweeps (loft vertex pairing)
tangency-labs/solidcraft#982	test infrastructure (offline web test)
tangency-labs/solidcraft#1041	perforation field: the hole count follows the layout (margins to the outline and bends), no closed form
tangency-labs/solidcraft#1089	flat-pattern DXF output only, no solid geometry
tangency-labs/solidcraft#1231	a user's design: only the refused selection is recorded, no geometry to rebuild
tangency-labs/solidcraft#1251	test infrastructure (feature walks)
tangency-labs/solidcraft#1284	flat-pattern DXF output only, no solid geometry
tangency-labs/solidcraft#1324	flat-pattern DXF output only, no solid geometry
tangency-labs/solidcraft#1325	a user's design: only the refused selection is recorded, no geometry to rebuild
tangency-labs/solidcraft#1326	a user's design: only the refused selection is recorded, no geometry to rebuild
tangency-labs/solidcraft#1391	other area: booleans (a prism joined flush to a lofted tube's end face: Union: no result)
tangency-labs/solidcraft#1446	other area: booleans (a text cut in one exact boolean)
tangency-labs/solidcraft#1475	a user's design: only the refused selection is recorded, no geometry to rebuild
tangency-labs/solidcraft#1483	UI only, no geometry
tangency-labs/solidcraft#1484	UI only, no geometry
tangency-labs/solidcraft#1501	parameter references of a mirror plane's origin, no failing geometry
tangency-labs/solidcraft#1556	other area: booleans (the retry for #1391)
tangency-labs/solidcraft#1603	a user's design: only the refused selection is recorded, no geometry to rebuild (a folded drip tray edited through its parameters)
tangency-labs/solidcraft#1683	parameter references of hole positions, no failing geometry
tangency-labs/solidcraft#1851	robustness goldens, test infrastructure
tangency-labs/solidcraft#1929	robustness goldens, test infrastructure
tangency-labs/solidcraft#2009	no repro that fixes a right answer: screenshots of an extrude joined to a flange and a chamfer; the flat pattern part is the refusal in #3324
tangency-labs/solidcraft#2272	face naming, no geometry
tangency-labs/solidcraft#2275	face naming, no geometry
tangency-labs/solidcraft#2286	chat UI, no geometry
tangency-labs/solidcraft#2298	chat backend, no geometry
tangency-labs/solidcraft#2399	a user's design: only the refused selection is recorded, no geometry to rebuild (a small body joined at a sheet corner, then flanged)
tangency-labs/solidcraft#2409	construction geometry references, not solid geometry
tangency-labs/solidcraft#2461	auto-report with command parameters only (an extrude cut on a face of a sheet metal bracket refused for touching a bend); the bracket is not in the report and the refusal is the documented behaviour, no number to grade
tangency-labs/solidcraft#2621	sketch dragging behaviour, no solid geometry
tangency-labs/solidcraft#2729	feature request: per-segment flanges on one edge, no failing geometry
tangency-labs/solidcraft#2732	feature wish list for flange parameters, no geometry
tangency-labs/solidcraft#2763	UI only, no geometry
tangency-labs/solidcraft#2894	other area: fillets (chamfers past the faces)
tangency-labs/solidcraft#2987	user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade
tangency-labs/solidcraft#3154	a user's design: only the refused selection is recorded, no geometry to rebuild
tangency-labs/solidcraft#3170	feature request: overlapping corner joins (butt, partial or full overlap); nothing to compare against yet
tangency-labs/solidcraft#3187	UI only, no geometry
tangency-labs/solidcraft#3188	UI only, no geometry
tangency-labs/solidcraft#3370	other area: fillets
tangency-labs/solidcraft#3397	assembly joint drive, no geometry
tangency-labs/solidcraft#3439	sketch dimensions, no solid geometry
tangency-labs/solidcraft#3472	open pull request for the overlap corner join feature #3170; a feature, no failing geometry
tangency-labs/solidcraft#3500	user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade (the report has no steps at all)
tangency-labs/solidcraft#3502	user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade
tangency-labs/solidcraft#3516	feature request: an edge flange extent defined by vertices or edges; no failing geometry
tangency-labs/solidcraft#3581	sketch move, no solid geometry
tangency-labs/solidcraft#3680	auto-report with command parameters only (a 5 mm drilled hole at one point of a sheet metal bracket, refused as unsupported 3D machining); no design, and holes in flat sheet are covered by 560 and 955
tangency-labs/solidcraft#3719	feature request for cables, not sheet metal geometry
tangency-labs/solidcraft#3722	origin plane colours, UI only
tangency-labs/solidcraft#3819	sketch pattern preview, UI only
tangency-labs/solidcraft#3908	other area: fillets (chamfering the rims of a flange's holes; closed unmerged)
tangency-labs/solidcraft#3937	UI only, no geometry
tangency-labs/solidcraft#3946	UI only, no geometry
tangency-labs/solidcraft#4094	feature request: a contour flange that joins an existing sheet; the chained edge flange workaround it describes already builds, so there is no failing geometry
tangency-labs/solidcraft#4096	open draft for the contour flange request #4094; a feature, no failing geometry
tangency-labs/solidcraft#4100	assembly bookkeeping when deleting an inserted STEP, no geometry
tangency-labs/solidcraft#4155	user error: an edge flange on a body that is not sheet metal ("there is no sheet metal body"), working as designed; no geometry to grade

shell

Source	Why skipped
tangency-labs/solidcraft#142	no concrete recipe: a general saddle/four-face corner construction request; its geometry is exercised by case 1494
tangency-labs/solidcraft#209	no geometry given (a screenshot and 'the shell removed everything'); needs the user's design
tangency-labs/solidcraft#1379	needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal, so no wrong result is recorded
tangency-labs/solidcraft#1969	needs the user's design (a sphere split into 6 faces picked by point); a closed hollow sphere is the same operation as case 4009
tangency-labs/solidcraft#1996	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset of a snap-fit bottom face in an 8-body design)
tangency-labs/solidcraft#2259	needs the eight-command script of #2258 (a shelled arched block, two cylinder cuts); neither it nor the arch dimensions are in the PR, and the failure hangs on 2e-6 mm vertex gaps that a re-guessed profile would not reproduce
tangency-labs/solidcraft#2421	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#2432	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#2445	no body or recipe given (a screenshot only)
tangency-labs/solidcraft#2452	no body or recipe given ('complex body' only)
tangency-labs/solidcraft#2478	not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment), no wrong shape
tangency-labs/solidcraft#2480	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a revolved profile with a freeform face)
tangency-labs/solidcraft#2493	not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)
tangency-labs/solidcraft#2556	empty report: no body, pick or error given
tangency-labs/solidcraft#2557	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 12 on an 8-body design)
tangency-labs/solidcraft#2745	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 11)
tangency-labs/solidcraft#2761	other area: 2D sketch offset of text outlines (sketch.offset), not a solid operation
tangency-labs/solidcraft#2795	not geometry: UI, the plane editor says 'select a plane first' when editing an offset plane
tangency-labs/solidcraft#2886	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#2905	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell .125 in on an 8-feature part)
tangency-labs/solidcraft#2917	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#2935	empty report: no body, pick or error given
tangency-labs/solidcraft#2978	not geometry: UI, the mouse position is offset from the buttons
tangency-labs/solidcraft#3000	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell direction both)
tangency-labs/solidcraft#3031	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#3074	needs the user's design (2 bodies, the face pick is not resolved: 'select at least one face'); a pick-resolution defect, not a shape with a known answer
tangency-labs/solidcraft#3105	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two opposite faces of a box in a 2-body design; the pick missed the faces)
tangency-labs/solidcraft#3158	empty report: no body, pick or error given
tangency-labs/solidcraft#3159	other area: 2D sketch offset of a spline (sketch.offset), not a solid operation
tangency-labs/solidcraft#3161	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#3163	empty report: no body, pick or error given
tangency-labs/solidcraft#3181	empty report: no body, pick or error given
tangency-labs/solidcraft#3290	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset face on a 13-feature, 2-body design)
tangency-labs/solidcraft#3341	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#3346	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#3492	not geometry: UI, 'select the curves to offset first' (sketch offset with an empty selection)
tangency-labs/solidcraft#3524	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a 3 mm shell of a body with 41 cylinder faces; the failure is in an internal boolean cut)
tangency-labs/solidcraft#3567	not geometry: construction-plane editing, 'plane offsets nested too deeply'
tangency-labs/solidcraft#3574	other area: 2D sketch offset of a spline (sketch.offset), not a solid operation
tangency-labs/solidcraft#3585	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred
tangency-labs/solidcraft#3603	not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)
tangency-labs/solidcraft#3621	not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)
tangency-labs/solidcraft#3672	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (surface.thicken of a 9-feature body)
tangency-labs/solidcraft#3721	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (filleted extruded box in a 2-body design)
tangency-labs/solidcraft#3742	other area: 2D sketch offset (sketch.offset, 'collapses an arc'), not a solid operation
tangency-labs/solidcraft#3774	not geometry: a feature request (clearance input on Combine cut)
tangency-labs/solidcraft#3795	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two faces, 4 mm; only a screenshot of the result)
tangency-labs/solidcraft#3828	other area: 2D sketch offset of splines (sketch.offset), not a solid operation
tangency-labs/solidcraft#3933	needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal
tangency-labs/solidcraft#4029	not geometry: construction-plane attachment jumps to another face after editing the offset
tangency-labs/solidcraft#4052	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (0.1 mm shell of a chamfered and filleted part)
tangency-labs/solidcraft#4073	empty report: no body, pick or error given
tangency-labs/solidcraft#4120	needs the user's design (3-body design; the pick is not resolved: 'select at least one face')
tangency-labs/solidcraft#4144	needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (three faces, 2 mm; move larger than the wall)

sweeps

Source	Why skipped
tangency-labs/solidcraft#85	not geometry: batch rollback and deleting a sketch removes its pipe (document history)
tangency-labs/solidcraft#171	not geometry: the CLI panics when its stdout pipe is closed
tangency-labs/solidcraft#174	not geometry: the fix for the closed stdout pipe panic (#171)
tangency-labs/solidcraft#407	not geometry: component placement frames when an extrude or revolve uses a sketch of another component (assembly)
tangency-labs/solidcraft#442	other area: booleans (inspect.interference misses a 0.36 mm3 overlap with a small rib)
tangency-labs/solidcraft#536	not geometry: inspect.interference pruning for large body counts
tangency-labs/solidcraft#705	UI: Extrude and Revolve leave the Profiles field empty when the last sketch is used
tangency-labs/solidcraft#709	UI: unit labels in the primitive dialogs
tangency-labs/solidcraft#1099	not geometry: startup crash on D3D12, tessellation pipeline fallback
tangency-labs/solidcraft#1213	other area: fillets (a round or chamfer on the end circle of a bent lofted tube)
tangency-labs/solidcraft#1402	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (sweep join of six profiles; design not attached)
tangency-labs/solidcraft#1496	other area: import (STEP export of shelled revolved bodies)
tangency-labs/solidcraft#1555	not geometry: headless pictures on the GPU
tangency-labs/solidcraft#1775	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (loft cut of two sketches)
tangency-labs/solidcraft#1928	other area: import (STEP export of revolved faces scaled across their axis)
tangency-labs/solidcraft#1967	no repro: 'the Loft operation isn't working', no sections, no parameters, no design
tangency-labs/solidcraft#1981	not geometry: joint sweep (driving an assembly joint), not a solid sweep
tangency-labs/solidcraft#1988	UI: hidden bodies are joined by a loft join (visibility scoping of the join participants); the loft with explicit targets is held by case 271
tangency-labs/solidcraft#2004	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve cut, "implausible result volume 298.2432")
tangency-labs/solidcraft#2216	UI: an edge cannot be picked as a sweep path ("select the path first"); no geometry
tangency-labs/solidcraft#2242	UI: the arc sweep value box covered the end-point pick (the sketch arc "sweep", not a solid sweep)
tangency-labs/solidcraft#2276	not geometry: inspect.parameter_sweep checks a design over a parameter range (a design-check command, not a sweep feature)
tangency-labs/solidcraft#2333	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (a 5 degree symmetric revolve join to skin a hole in a cylinder; no dimensions)
tangency-labs/solidcraft#2350	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (crash while running a 5-section loft join named RainRidge; sketches not given)
tangency-labs/solidcraft#2442	empty report: the sweep failure arrived with no content
tangency-labs/solidcraft#2486	other area: shell (shelling revolved barrels; held by the shell rig)
tangency-labs/solidcraft#2515	empty report: no body, no parameters, no geometry
tangency-labs/solidcraft#2576	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (loft join of two sketches)
tangency-labs/solidcraft#2656	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (sweep cut along an arc and a line)
tangency-labs/solidcraft#2673	tessellation: artefacts on the arc of a revolved half pill seen in a screenshot, with no dimensions that fix the sketch (display is owned elsewhere)
tangency-labs/solidcraft#2747	no geometry: "revolve does not work on a selected face of a cube" with no axis or dimensions; a face profile has no axis lying in its plane to revolve about
tangency-labs/solidcraft#2791	other area: booleans (lens-profile cut into a revolved quarter sphere; the profile is not given in the report)
tangency-labs/solidcraft#2802	UI: leave sketch mode when Extrude starts; no geometry
tangency-labs/solidcraft#2811	other area: fillets (performance of filleting many rib roots)
tangency-labs/solidcraft#2815	UI: the pull request finishing the sketch when Extrude or Revolve starts
tangency-labs/solidcraft#2816	not reproduced and no geometry: a surface sweep that went the opposite way from the path; the sketches were not attached (the sweep starts at the path end nearest the profile)
tangency-labs/solidcraft#2883	UI: the dialog was opened with no profiles picked ("select profiles of two or more sketches first"); working as designed
tangency-labs/solidcraft#2954	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (twisted annular sweep cut; the design was lost)
tangency-labs/solidcraft#2990	other area: shell (shelling a loft; held by the shell rig as 3669-shell-lofted-square-frustum)
tangency-labs/solidcraft#2993	not reproduced and no geometry: a circle swept along a fit-point spline follows the path on current builds; the design with the failing sketch placement was not attached
tangency-labs/solidcraft#3063	UI: the dialog was opened with no sections picked; the reporter wants a spline loft that is not described
tangency-labs/solidcraft#3076	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join of three profiles against a body with 29 curved faces)
tangency-labs/solidcraft#3215	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (a 15-profile revolve cut that runs for minutes)
tangency-labs/solidcraft#3241	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join)
tangency-labs/solidcraft#3308	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (loft join of two sketches)
tangency-labs/solidcraft#3318	other area: booleans (symmetric through-all lens cut on a revolved ring that shares its outline cylinder; the reproduction is an example file not given in the report)
tangency-labs/solidcraft#3433	not geometry: GPU path tracer shader cache
tangency-labs/solidcraft#3545	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join)
tangency-labs/solidcraft#3635	feature request: start and end conditions for extrude, hole and loft; no geometry
tangency-labs/solidcraft#3636	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (coil join, Union no result; the target body is not given and the pitch was typed with a decimal comma)
tangency-labs/solidcraft#3691	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (a 90 degree revolve joined to the bottom of a letter L; the design is only in an attached file)
tangency-labs/solidcraft#3697	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "unexpected result" with only a screenshot)
tangency-labs/solidcraft#3717	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result")
tangency-labs/solidcraft#3724	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result")
tangency-labs/solidcraft#3726	UI: the dialog was opened with no sections picked ("select the sections, one sketch each first"); no geometry
tangency-labs/solidcraft#3752	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result")
tangency-labs/solidcraft#3781	UI feature request: a target-body picker in the Extrude, Sweep and Revolve dialogs (the command already takes targets, held by the loft targets case 271)
tangency-labs/solidcraft#3790	feature request: square and triangular pipe sections, no geometry to grade (the pipe takes a circular section only)
tangency-labs/solidcraft#3806	other area: import (IGES surface of revolution of an arc read as a whole sphere; held by the import rig as 3806-iges-revolved-arc-spherical-cap-dome)
tangency-labs/solidcraft#3813	other area: import (the fix for #3806, IGES revolved arc)
tangency-labs/solidcraft#3818	other area: tessellation (hovering a long helical edge)
tangency-labs/solidcraft#3837	not geometry: exploded view steps, easing and trail lines (assembly presentation)
tangency-labs/solidcraft#3840	not geometry: the pull request for the exploded view steps (#3837)
tangency-labs/solidcraft#3880	other area: import (STEP conformance regression sweep)
tangency-labs/solidcraft#3901	other area: import (STEP conformance parts, cones to a point)
tangency-labs/solidcraft#3960	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result")
tangency-labs/solidcraft#3987	other area: import (revolve, sweep and loft joined to a part nested in a STEP assembly)
tangency-labs/solidcraft#4005	other area: import (STEP export writes a cylinder as a cone of semi-angle 8e-12; the revolve itself is right, and the import rig holds this as 4005-cylinder-written-as-near-zero-cone)
tangency-labs/solidcraft#4006	other area: import (STEP export of a revolve written as a cone of semi-angle pi/2; the revolve itself is right, and the import rig holds this as 4006-plane-written-as-cone-of-nearly-right-angle)
tangency-labs/solidcraft#4037	empty report: the loft failure arrived with no content
tangency-labs/solidcraft#4092	reproduction JSON cut off in the source (the 50-command script stops mid-way, rib shapes not given in the text)
tangency-labs/solidcraft#4093	reproduction script cut off in the source (a 3-turn guided thread sweep cut; the generator stops mid-way) and the run takes about 48 s, over the case budget
tangency-labs/solidcraft#4139	no geometry: an auto-report with only the failing command's parameters (sketch and profile ids), no sketch, axis or body to rebuild from (revolve join, "boolean Union: no result")

tessellation

Source	Why skipped
tangency-labs/solidcraft#15	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#48	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#63	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#78	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#79	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#92	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#95	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#125	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#133	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#134	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#173	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#175	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#202	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#256	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#301	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#335	other area: fillets
tangency-labs/solidcraft#346	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#352	other area: sweeps (projection of faces split by hidden seams is a sketch-projection feature, not a mesh defect)
tangency-labs/solidcraft#358	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#472	feature: Patch fills non-planar edge loops with one smooth face (#250); not a tessellation defect
tangency-labs/solidcraft#550	other area: sheet-metal
tangency-labs/solidcraft#581	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#615	other area: booleans (a mesh body is not a solid for a cut; the refusal is by design)
tangency-labs/solidcraft#620	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#623	other area: booleans
tangency-labs/solidcraft#636	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#642	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#650	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#654	other area: booleans
tangency-labs/solidcraft#658	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#667	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#673	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#706	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#714	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#720	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#742	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#744	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#756	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#762	feature: surface.ruled strips off an edge chain, no defect
tangency-labs/solidcraft#766	feature: surface.unstitch and surface.reverse_normal commands, no defect
tangency-labs/solidcraft#775	other area: fillets
tangency-labs/solidcraft#796	other area: fillets
tangency-labs/solidcraft#797	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#800	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#802	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#803	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#805	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#806	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#813	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#829	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#837	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#842	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#849	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#856	implements the unstitch and reverse-normal commands of #766; a feature, not a defect
tangency-labs/solidcraft#870	re-records a robustness golden after the tessellation plans; no geometry of its own
tangency-labs/solidcraft#878	a Windows-only robustness golden (seed 0) differing during render integration; no geometry of its own
tangency-labs/solidcraft#900	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#906	other area: fillets
tangency-labs/solidcraft#914	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#916	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#917	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#936	other area: fillets
tangency-labs/solidcraft#940	re-records robustness goldens after the body mesh moved back to the reference mesher; no recipe of its own
tangency-labs/solidcraft#961	other area: booleans
tangency-labs/solidcraft#974	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#983	GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right
tangency-labs/solidcraft#1003	other area: booleans
tangency-labs/solidcraft#1004	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1012	GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right
tangency-labs/solidcraft#1019	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1022	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1038	performance only: a small hole takes 7.5 s while meshing its intersection edges; no wrong geometry
tangency-labs/solidcraft#1046	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1087	diagnostic feature: sampled G0/G1/G2 seam reports; no defect
tangency-labs/solidcraft#1098	GPU startup crash: the tessellation shader fails to compile on D3D12 with FXC
tangency-labs/solidcraft#1099	GPU startup crash fix: CPU fallback for the tessellation pipeline
tangency-labs/solidcraft#1113	other area: fillets
tangency-labs/solidcraft#1142	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1152	other area: import
tangency-labs/solidcraft#1157	the fix for #882 (one unmeshed fillet strip of an owner's design): no small synthetic recipe with a closed-form answer
tangency-labs/solidcraft#1163	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#1200	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#1213	other area: fillets
tangency-labs/solidcraft#1218	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1223	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1237	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1252	other area: crashes
tangency-labs/solidcraft#1259	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#1267	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1272	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1287	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#1289	other area: threads
tangency-labs/solidcraft#1291	other area: fillets
tangency-labs/solidcraft#1300	other area: threads
tangency-labs/solidcraft#1307	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#1309	performance only: point-in-trim tests skip runs of segments; same meshes as before
tangency-labs/solidcraft#1313	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1319	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#1320	display-plan / display-quality plumbing for the viewport; the kernel's measured mesh and B-rep are not affected
tangency-labs/solidcraft#1327	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1332	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1339	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1345	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1346	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1348	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#1358	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1364	other area: booleans
tangency-labs/solidcraft#1368	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1374	other area: import
tangency-labs/solidcraft#1385	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1400	other area: import
tangency-labs/solidcraft#1425	display-quality refinement as you zoom (viewport only); the kernel's B-rep and measured mesh are not affected
tangency-labs/solidcraft#1434	GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right
tangency-labs/solidcraft#1442	report with no description, only a screenshot of an unnamed part: nothing to rebuild
tangency-labs/solidcraft#1454	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1455	other area: booleans
tangency-labs/solidcraft#1459	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1460	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1461	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1462	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1464	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1468	other area: import
tangency-labs/solidcraft#1477	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1492	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1493	other area: import
tangency-labs/solidcraft#1494	other area: shell
tangency-labs/solidcraft#1512	other area: import
tangency-labs/solidcraft#1553	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1579	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1605	other area: import
tangency-labs/solidcraft#1640	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1651	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1652	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1654	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1655	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1656	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1658	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1677	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1693	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1694	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1695	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1696	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1698	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1699	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1700	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1721	other area: import
tangency-labs/solidcraft#1722	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1723	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1724	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1726	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#1739	GPU depth fighting between the origin gizmo and a face (fixed by #1768); no B-rep cause
tangency-labs/solidcraft#1742	other area: import
tangency-labs/solidcraft#1743	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1768	GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right
tangency-labs/solidcraft#1773	GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right
tangency-labs/solidcraft#1776	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#1799	other area: sheet-metal
tangency-labs/solidcraft#1812	empty description; it only edits the boolean property-test harness, no geometry stated
tangency-labs/solidcraft#1902	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1907	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1910	other area: booleans
tangency-labs/solidcraft#1912	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1978	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#1983	other area: booleans
tangency-labs/solidcraft#2015	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2034	other area: booleans
tangency-labs/solidcraft#2054	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2056	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2057	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2067	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#2086	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2095	timing of a thread's faceted cut in a kernel profile; no geometry defect
tangency-labs/solidcraft#2102	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2115	other area: threads
tangency-labs/solidcraft#2130	GPU/UI only: the face hover highlight flickers while panning on a touchpad
tangency-labs/solidcraft#2134	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2153	GPU display only: zebra analysis flickers on horizontal faces of a bolted flange while the camera rotates; the B-rep is a plain extruded and patterned flange
tangency-labs/solidcraft#2156	other area: booleans
tangency-labs/solidcraft#2191	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#2235	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#2325	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2367	other area: threads
tangency-labs/solidcraft#2450	display only: Section Analysis draws a white line along the edge of a circular-pattern of a revolve; the report has no revolve profile or section plane, and the solid itself is not claimed wrong
tangency-labs/solidcraft#2482	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#2487	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2488	other area: fillets
tangency-labs/solidcraft#2508	other area: import
tangency-labs/solidcraft#2513	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2526	other area: threads
tangency-labs/solidcraft#2560	UI only: the Save as Mesh button stays disabled until bodies are selected
tangency-labs/solidcraft#2568	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2603	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2662	test-coverage audit of mutants in the tessellator; no geometry defect
tangency-labs/solidcraft#2675	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2698	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#2769	feature request: an option to export a finer STL (the Save as Mesh dialog has no tolerance); not a defect
tangency-labs/solidcraft#2780	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2809	other area: import
tangency-labs/solidcraft#2811	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#2846	feature request: a chord-tolerance option for Save as Mesh; the default export is not wrong geometry
tangency-labs/solidcraft#2865	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#2867	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#2868	other area: threads
tangency-labs/solidcraft#2880	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#2895	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#2922	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#2924	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#2947	other area: booleans
tangency-labs/solidcraft#2948	other area: booleans
tangency-labs/solidcraft#3001	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#3012	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#3020	other area: booleans
tangency-labs/solidcraft#3047	other area: import
tangency-labs/solidcraft#3059	GPU/viewport drawing only (depth, highlight, shaders): the B-rep and its mesh are right
tangency-labs/solidcraft#3071	mesher unit case on a hand-built rational B-spline patch; no command builds that face (it came from an imported purchased part), so no synthetic recipe shows the self-crossing sliver
tangency-labs/solidcraft#3072	the fix for #3071 (self-crossing sliver face): no command-level repro, see #3071
tangency-labs/solidcraft#3127	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#3142	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3178	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#3207	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#3208	other area: import
tangency-labs/solidcraft#3249	not a tessellation defect: inspect.interference/clearance skip mesh bodies (feature gap for imported mesh bodies)
tangency-labs/solidcraft#3258	not a tessellation defect: lists mesh bodies as unchecked in inspect.interference/clearance
tangency-labs/solidcraft#3311	other area: threads
tangency-labs/solidcraft#3368	other area: booleans
tangency-labs/solidcraft#3369	other area: fillets
tangency-labs/solidcraft#3370	other area: fillets
tangency-labs/solidcraft#3400	other area: fillets
tangency-labs/solidcraft#3410	other area: booleans
tangency-labs/solidcraft#3437	other area: fillets
tangency-labs/solidcraft#3480	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3503	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3504	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3528	other area: booleans
tangency-labs/solidcraft#3616	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3699	UI only: the extrude preview direction
tangency-labs/solidcraft#3700	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#3712	adds chord tolerance and facet angle options to Save as Mesh; no geometry defect
tangency-labs/solidcraft#3722	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3755	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3847	other area: threads
tangency-labs/solidcraft#3849	other area: threads
tangency-labs/solidcraft#3873	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#3899	other area: crashes (a non-affine matrix reaches only the kernel's transform_matrix API; no command passes a matrix and solid.scale already refuses a zero factor, so no recipe reaches it)
tangency-labs/solidcraft#3906	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#3922	other area: fillets
tangency-labs/solidcraft#3924	other area: import
tangency-labs/solidcraft#3925	other area: import
tangency-labs/solidcraft#3942	other area: import (mesh-body conversion and mesh-to-solid reconstruction, not a tessellation artefact)
tangency-labs/solidcraft#3981	performance or caching only: no wrong geometry, nothing graded by shape
tangency-labs/solidcraft#4021	other area: import
tangency-labs/solidcraft#4105	UI only: no geometry or mesh in the report
tangency-labs/solidcraft#4127	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry
tangency-labs/solidcraft#4154	rendering pipeline (CPU/GPU renderer, lighting, materials); no B-rep or mesh geometry

threads

Source	Why skipped
tangency-labs/solidcraft#287	performance umbrella: multithreading, SIMD, caching; nothing to grade
tangency-labs/solidcraft#424	Insert Part bolts carry cosmetic threads by design (the comment asks for a modelled option); no geometry defect
tangency-labs/solidcraft#519	feature request: a thread as 1 to 3 faces so it can be offset; no closed-form face count to grade
tangency-labs/solidcraft#524	design preference (thread adds material instead of cutting into the part) and a groove-end convention at shoulders with no derivable number; the hole-too-wide fill it was linked to is case 1443-m5x0.7-thread-in-5mm-hole
tangency-labs/solidcraft#873	other area: booleans (a hexagon join beside a screw: 'join cannot preserve the original faces'; no thread involved)
tangency-labs/solidcraft#987	auto-report with a fillet's four edge picks and a screenshot only ('a ghost in the thread creation'): no design, no thread parameters, nothing to rebuild or compute
tangency-labs/solidcraft#1020	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#1024	test-process memory corruption on Windows in the thread tests, not a geometry result with a right answer
tangency-labs/solidcraft#1201	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#1289	other area: tessellation (imported STEP threads displayed with artifacts; the B-rep was fine)
tangency-labs/solidcraft#1300	other area: tessellation (display of imported modelled threads)
tangency-labs/solidcraft#1524	assembly joints (gear, rack and screw couplings between motions): no kernel geometry
tangency-labs/solidcraft#1527	other area: booleans (last-resort nudge of a pleat loft join; not a thread)
tangency-labs/solidcraft#1675	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#1731	no repro geometry: 'planar boolean: shell not oriented and closed' with only a face point; the family of case 3311-two-tapped-holes-both-modelled-threaded
tangency-labs/solidcraft#1759	UI only: the Thread dialog's size suggestion
tangency-labs/solidcraft#1794	no repro geometry: 'no cylindrical face there to thread' with only a face point of a private design; the family of case 2038-internal-then-external-thread-on-one-body
tangency-labs/solidcraft#2079	tracker for modelled threads; the geometry is in cases 2038-* and 2526-*
tangency-labs/solidcraft#2095	performance: kernel profile timings of a thread's faceted cut
tangency-labs/solidcraft#2243	other area: import (STEP export read-back hangs meshing a seam cylinder hole)
tangency-labs/solidcraft#2264	UI only: modelled-thread preview in the dialog
tangency-labs/solidcraft#2265	UI only: reopening a Thread feature lost its face selection
tangency-labs/solidcraft#2451	other area: crashes (a crash report with only a face point, no design)
tangency-labs/solidcraft#2467	window-thread / UI responsiveness, not modelled threads: no geometry
tangency-labs/solidcraft#2468	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#2470	other area: crashes (a crash report with only a face point, no design)
tangency-labs/solidcraft#2679	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#2796	other area: crashes (a crash report with only a face point, no design)
tangency-labs/solidcraft#2868	UI only: cosmetic thread markings as a display preference
tangency-labs/solidcraft#2892	no repro geometry: 'planar boolean: tree too deep' for an M22x2.5 modelled thread, with only a face point
tangency-labs/solidcraft#2908	test flakiness of the off-window-thread tests: not geometry
tangency-labs/solidcraft#2929	test flakiness of the off-window-thread tests: not geometry
tangency-labs/solidcraft#3110	not kernel geometry: the automatic-size lookup refuses a 78 mm shaft (no standard size); a cosmetic thread leaves the model unchanged
tangency-labs/solidcraft#3130	auto-report with command parameters only (an M5 drilled hole at a point the comment reads as off the part): no design; a drilled M5 hole in a block works, so there is no geometry to grade
tangency-labs/solidcraft#3131	no repro geometry: 'the face is too far from the thread's diameter' with only a face point; the family of case 2369
tangency-labs/solidcraft#3133	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#3135	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#3145	feature request: threads without turning the whole body into facets; no number to grade (the multi-thread case 2526-three-modelled-threads-in-one-body covers the symptom)
tangency-labs/solidcraft#3165	empty report (the body was not pasted)
tangency-labs/solidcraft#3183	no repro geometry: 'planar boolean: tree too deep' redefining a thread after a fillet; sizes of the private design unknown
tangency-labs/solidcraft#3307	no repro: a hole with a thread size is a cosmetic thread by default (see case 2115-tapped-hole-drill-is-major-minus-pitch)
tangency-labs/solidcraft#3337	no repro geometry: 'planar boolean: shell not oriented and closed' with only a face point; the same family as case 3311-two-tapped-holes-both-modelled-threaded
tangency-labs/solidcraft#3340	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#3386	other area: crashes (a crash report with only a face point, no design)
tangency-labs/solidcraft#3467	no repro geometry: 'planar boolean: shell not oriented and closed' with only the face point of a private design; the same family as case 3311-two-tapped-holes-both-modelled-threaded
tangency-labs/solidcraft#3519	UI only: the Thread dialog was applied with no cylindrical face selected
tangency-labs/solidcraft#3609	CPU or window threads (off-thread evaluation, freezes), not modelled threads: no geometry
tangency-labs/solidcraft#3622	test flakiness: not geometry
tangency-labs/solidcraft#3710	no repro geometry: the report has only the face point of a private design (an app that stopped responding)
tangency-labs/solidcraft#3737	UI only: orbit and zoom freeze in edge highlighting on the main thread
tangency-labs/solidcraft#3738	UI and data: tapped-hole catalogue of metric fine, UNC and UNF sizes with tabulated pilot drills; no closed form
tangency-labs/solidcraft#3745	UI only: hover highlight of a large thread computed on the main thread
tangency-labs/solidcraft#3824	auto-report with command parameters only (an M5 drilled hole from sketch point 8, failing 'no cylindrical face there to thread'): the sketch's face is not in the report, and a drilled M5 hole from a point on a flat block face works
tangency-labs/solidcraft#3847	other area: tessellation (display plans for threads and pointed ends of imported STEP bodies)
tangency-labs/solidcraft#3849	other area: tessellation (display plans for STEP threads and pointed ends)
tangency-labs/solidcraft#3870	other area: tessellation (hover and select a thread as one piece: display and picking groups)
tangency-labs/solidcraft#4033	visual only: the thread's facets look faceted; the report has no design, only a face point
tangency-labs/solidcraft#4085	no new geometry: M6 on a 7 mm shaft is a shaft thicker than the thread, the family of case 2705
tangency-labs/solidcraft#4087	feature request: the thread as a few selectable faces rather than many facets; no closed-form face count, no number to grade
tangency-labs/solidcraft#4093	other area: sweeps (a guided helical sweep cut whose exported mesh has open boundaries; not the Thread feature)