mirror of
https://github.com/bherbruck/solidcraft.git
synced 2026-11-06 20:02:16 +00:00
jyviko
ba38fbd2af
The inner corner of a 20 x 20 x 10 notch in the 60 x 40 x 20 box, three concave r5 rounds with corner: g2: one valid body of 13 faces within the box, the patch's twelve seams jumping at most 1e-3 per mm clear of the hole's six corners (2.7e-4 measured; the ball corner jumps 0.2). The continuity check looks within 11 mm of the corner: the vertical round, 2.5 mm long past its setback, meets its faces 11.2 mm out with every round's G1 jump. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1160 lines
106 KiB
Python
1160 lines
106 KiB
Python
"""The kernel complexity ladder's cases (tests/kernel-cases/ladder): every recipe and every
|
|
expected answer, with its derivation in `method`. Plain Python 3, standard library only.
|
|
|
|
python3 tools/kernel-ladder/cases.py
|
|
|
|
rewrites each case's recipe.json and expected.json and adds new cases to ladder.json (at the end
|
|
of their tier, until `cargo xtask kernel-cases --ladder --record` sorts them by time). It never
|
|
touches golden.json, and keeps the recorded order of cases already listed. Never change a value
|
|
to match a kernel's output: if they disagree, find out which one is wrong."""
|
|
import json
|
|
import math
|
|
import os
|
|
import sys
|
|
|
|
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
|
|
from ladder_lib import * # noqa: E402,F403
|
|
from reported import LOFT_RIBS_PAD, PLEATED_SKINS # noqa: E402
|
|
|
|
def up(tier, name):
|
|
return f"../../{tier}/{name}"
|
|
|
|
T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11 = (
|
|
"01-primitives", "02-booleans", "03-analytic-profiles", "04-spline-profiles", "05-holes-and-taps",
|
|
"06-threads", "07-fillets", "08-chamfers", "09-shells-and-offsets", "10-patterns-and-mirrors", "11-cumulative-parts")
|
|
BOX = box([0, 0, 0], 60, 40, 20, body_name="Part")
|
|
VB = 60 * 40 * 20
|
|
BBOX = {"min": [0, 0, 0], "max": [60, 40, 20]}
|
|
|
|
# ---------------------------------------------------------------- 01 primitives
|
|
case(T1, "001-box", "a 60x40x20 box: the stock every later tier starts from", [BOX],
|
|
{"body_count": 1, "volume_mm3": VB, "area_mm2": 2 * (2400 + 1200 + 800), "faces": 6, "edges": 12, "vertices": 8, "bbox": BBOX},
|
|
"V = 60*40*20; A = 2(60*40 + 60*20 + 40*20); a box has 6 faces, 12 edges, 8 vertices")
|
|
case(T1, "002-cylinder", "a cylinder r10 h30", [cyl([0, 0, 0], 10, 30)],
|
|
{"body_count": 1, "volume_mm3": PI * 100 * 30, "area_mm2": 2 * PI * 100 + 2 * PI * 10 * 30, "faces": 3,
|
|
"bbox": {"min": [-10, -10, 0], "max": [10, 10, 30]}},
|
|
"V = pi r^2 h; A = 2 pi r^2 + 2 pi r h; faces: two disks and one whole cylinder")
|
|
l = math.hypot(10, 30)
|
|
case(T1, "003-cone", "a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line)",
|
|
sketch(vplane([0, 0, 0]), line([[0, 0], [10, 0], [0, 30]], ids=["b", "s", "ax"], closed=True)) + [C("solid.revolve", axis="ax")],
|
|
{"body_count": 1, "volume_mm3": PI * 100 * 30 / 3, "area_mm2": PI * 100 + PI * 10 * l, "faces": 2,
|
|
"bbox": {"min": [-10, -10, 0], "max": [10, 10, 30]}},
|
|
"V = pi r^2 h / 3; A = pi r^2 + pi r sqrt(r^2 + h^2); a disk and the cone face")
|
|
R, r, h = 10, 5, 20
|
|
l = math.hypot(R - r, h)
|
|
case(T1, "004-frustum", "a cone frustum r10 -> r5, h20 (revolved trapezoid)",
|
|
sketch(vplane([0, 0, 0]), line([[0, 0], [10, 0], [5, 20], [0, 20]], ids=["b", "s", "t", "ax"], closed=True)) + [C("solid.revolve", axis="ax")],
|
|
{"body_count": 1, "volume_mm3": PI * h / 3 * (R * R + R * r + r * r), "area_mm2": PI * (R * R + r * r) + PI * (R + r) * l, "faces": 3},
|
|
"V = pi h/3 (R^2 + R r + r^2); A = pi (R^2 + r^2) + pi (R + r) sqrt((R-r)^2 + h^2)")
|
|
case(T1, "005-sphere", "a sphere r10", [C("solid.sphere", radius=10)],
|
|
{"body_count": 1, "volume_mm3": 4 / 3 * PI * 1000, "area_mm2": 4 * PI * 100, "faces": 1,
|
|
"bbox": {"min": [-10, -10, -10], "max": [10, 10, 10]}},
|
|
"V = 4/3 pi r^3; A = 4 pi r^2; one face")
|
|
case(T1, "006-torus", "a torus R20 r5", [C("solid.torus", major=20, minor=5)],
|
|
{"body_count": 1, "volume_mm3": 2 * PI * PI * 20 * 25, "area_mm2": 4 * PI * PI * 20 * 5, "faces": 1,
|
|
"bbox": {"min": [-25, -25, -5], "max": [25, 25, 5]}},
|
|
"V = 2 pi^2 R r^2; A = 4 pi^2 R r; one face")
|
|
B1 = up(T1, "001-box")
|
|
|
|
# ---------------------------------------------------------------- 02 booleans
|
|
case(T2, "001-coincident-face-join", "a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box",
|
|
[box([0, 0, 20], 60, 40, 10, operation="join", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": 72000.0, "faces": 6, "edges": 12, "vertices": 8, "bbox": {"min": [0, 0, 0], "max": [60, 40, 30]}},
|
|
"the boxes share the whole face z=20 and every side is coplanar: the union is the box 60x40x30, V = 72000, its coplanar sides merged into 6 faces", base=B1)
|
|
case(T2, "002-coplanar-overlap-join", "two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar",
|
|
[box([30, 20, 0], 60, 40, 20, operation="join", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": 2 * VB - 30 * 20 * 20, "faces": 10},
|
|
"V = 2*48000 - 30*20*20; the plan outline is an 8-sided polygon: 8 sides + top + bottom", base=B1)
|
|
case(T2, "003-pocket-flush-with-top", "a 20x20x10 pocket whose tool's top is the stock's top face",
|
|
[box([20, 10, 10], 20, 20, 10, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB - 4000, "faces": 11},
|
|
"V = 48000 - 20*20*10; faces: 6 + 4 pocket walls + pocket floor", base=B1)
|
|
case(T2, "004-edge-on-edge-no-overlap", "a cut tool that shares only the top front edge of the stock",
|
|
[box([0, -10, 20], 60, 10, 10, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB, "faces": 6, "edges": 12, "vertices": 8},
|
|
"the tool touches the stock only along the edge y=0, z=20: nothing is removed, the box stays as it was", base=B1)
|
|
case(T2, "005-vertex-on-face-no-overlap", "an inverted cone whose apex touches the middle of the top face, cut",
|
|
sketch(vplane([30, 20, 0]), line([[0, 20], [10, 30], [0, 30]], ids=["s", "t", "ax"], closed=True)) + [C("solid.revolve", axis="ax", operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB, "faces": 6, "edges": 12, "vertices": 8},
|
|
"the cone (apex (30,20,20), base r10 at z=30) meets the stock only at its apex: the cut removes nothing", base=B1)
|
|
case(T2, "006-tangent-along-line-no-overlap", "a cylinder r10 along X lying on the top face (tangent along a line), cut",
|
|
[cyl([-5, 20, 30], 10, 70, axis="X", operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB, "faces": 6, "edges": 12, "vertices": 8},
|
|
"the cylinder (axis y=20, z=30) touches the top face z=20 only along the line y=20: nothing is removed", base=B1)
|
|
case(T2, "007-near-tangent-gap-1e-3", "a cylinder r10 along X 1e-3 mm above the top face, cut",
|
|
[cyl([-5, 20, 30.001], 10, 70, axis="X", operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB, "faces": 6, "edges": 12, "vertices": 8},
|
|
"gap 1e-3 mm: no contact, nothing is removed", base=B1)
|
|
case(T2, "008-near-tangent-gap-1e-6", "a cylinder r10 along X 1e-6 mm above the top face, cut",
|
|
[cyl([-5, 20, 30.000001], 10, 70, axis="X", operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB, "faces": 6, "edges": 12, "vertices": 8},
|
|
"gap 1e-6 mm: no contact; even a kernel that treats it as touching must remove nothing", base=B1)
|
|
hh = 1e-3
|
|
seg = 100 * math.acos((10 - hh) / 10) - (10 - hh) * math.sqrt(2 * 10 * hh - hh * hh)
|
|
case(T2, "009-near-tangent-overlap-1e-3", "a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep",
|
|
[cyl([-5, 20, 29.999], 10, 70, axis="X", operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB - 60 * seg, "faces": 8},
|
|
f"circular segment of depth h=1e-3 in r=10: A = r^2 acos((r-h)/r) - (r-h) sqrt(2rh - h^2) = {seg:.3e} mm^2, times 60; the groove runs the whole length, so it splits the top face in two and adds one cylinder face: 6 - 1 + 2 + 1", base=B1)
|
|
case(T2, "010-near-tangent-overlap-1e-6", "a cylinder r10 along X dipping 1e-6 mm into the top face, cut",
|
|
[cyl([-5, 20, 29.999999], 10, 70, axis="X", operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB},
|
|
"a groove 1e-6 deep (V change ~1e-8) is at the kernels' tolerance: a groove or no change are both right; graded: one valid body, V = 48000", base=B1, source="invariants")
|
|
case(T2, "011-tangent-along-circle-through-hole", "a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut",
|
|
[cyl([30, 20, -1], 10, 22, operation="cut", targets=["Part"]), C("solid.sphere", radius=10, center=[30, 20, 20], operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 100 * 20, "faces": 7},
|
|
"the lower half of the sphere lies inside the hole, tangent to its wall along the circle z=20, the upper half is outside: the sphere removes nothing more; V = 48000 - pi 100 20", base=B1)
|
|
case(T2, "012-tangent-along-circle-bowl", "a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly",
|
|
[cyl([30, 20, 10], 10, 11, operation="cut", targets=["Part"]), C("solid.sphere", radius=10, center=[30, 20, 10], operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 100 * 10 - 2 / 3 * PI * 1000, "faces": 8},
|
|
"the sphere's equator is the floor's edge circle (tangent to the hole wall along it): removed = pi r^2 10 + 2/3 pi r^3; faces 6 + wall + bowl", base=B1)
|
|
area = quad(lambda y: math.sqrt(100 - y * y) - 5, -2, 2)
|
|
case(T2, "013-cut-across-cylinder-seam", "a 10x4 notch through a cylinder r10 across its +X side (where the seam lies)",
|
|
[cyl([0, 0, 0], 10, 20, body_name="Part"), box([5, -2, -1], 10, 4, 22, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": PI * 100 * 20 - 20 * area, "faces": 6},
|
|
f"removed section = int_-2^2 (sqrt(100 - y^2) - 5) dy = {area:.9f} (Gauss), times 20; faces: cylinder, 2 disks, 3 notch planes")
|
|
def cap(x):
|
|
return quad(lambda y: math.sqrt(100 - x * x - y * y) - 5, -2, 2)
|
|
pole = quad(cap, -2, 2)
|
|
case(T2, "014-cut-through-sphere-pole", "a 4x4 square post cut off the top of a sphere r10 through its pole",
|
|
[C("solid.sphere", radius=10, body_name="Part"), box([-2, -2, 5], 4, 4, 6, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": 4 / 3 * PI * 1000 - pole, "faces": 6},
|
|
f"removed = int over the square |x|,|y|<=2 of (sqrt(100 - x^2 - y^2) - 5) = {pole:.9f} (nested Gauss); faces: sphere, 4 sides, floor z=5")
|
|
case(T2, "015-knife-edge-wedge-cut", "a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's",
|
|
sketch(plane([0, 41, 0], [1, 0, 0], [0, 0, 1]), line([[0, 0], [60, 20], [0, 20]], closed=True)) + [C("solid.extrude", distance=42, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB / 2, "faces": 5, "edges": 9, "vertices": 6},
|
|
"the tool removes the half above the plane through the edge x=0,z=0 and the edge x=60,z=20: a wedge 60x40x20/2 = 24000 with a knife edge at x=0, z=0", base=B1)
|
|
case(T2, "016-v-groove-pinches-bottom-to-line", "a V groove whose apex touches the bottom face along a line, cut through: two pieces",
|
|
sketch(plane([0, 41, 0], [1, 0, 0], [0, 0, 1]), line([[15, 25], [30, 0], [45, 25]], closed=True)) + [C("solid.extrude", distance=42, operation="cut", targets=["Part"])],
|
|
{"body_count": 2, "volume_mm3": VB - 0.5 * 24 * 20 * 40},
|
|
"apex (30, 0) on the bottom face, flanks through (18, 20) and (42, 20): removed triangle 24 wide x 20 high, times 40; the pieces meet only along the line x=30, z=0, so the regularized result is two solids", base=B1)
|
|
case(T2, "017-cylinder-tangent-top-and-bottom", "a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps",
|
|
[cyl([-5, 20, 10], 10, 70, axis="X", operation="cut", targets=["Part"])],
|
|
{"body_count": 2, "volume_mm3": VB - PI * 100 * 60},
|
|
"the cylinder (axis y=20, z=10) spans the full height at y=20: removed pi r^2 60; the halves meet only along the lines y=20, z=0 and z=20: two solids", base=B1)
|
|
case(T2, "018-hole-tangent-to-side-face", "a through hole r10 tangent to the front face: the front face pinched to a line",
|
|
[cyl([30, 10, -1], 10, 22, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 100 * 20},
|
|
"the hole touches y=0 along the line x=30: removed pi r^2 20, the material behind keeps one body", base=B1)
|
|
case(T2, "019-notch-flush-with-end-face", "a notch 40x20 through the height, its end flush with the stock's end face: a U",
|
|
[box([20, 10, -1], 40, 20, 22, operation="cut", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB - 40 * 20 * 20, "faces": 10},
|
|
"the tool's end face is x=60, the stock's: V = 48000 - 16000; the U outline has 8 sides, + top + bottom", base=B1)
|
|
case(T2, "020-part-back-wall", "the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends",
|
|
[box([0, 30, 20], 60, 10, 15, operation="join", targets=["Part"])],
|
|
{"body_count": 1, "volume_mm3": VB + 60 * 10 * 15, "faces": 8, "bbox": {"min": [0, 0, 0], "max": [60, 40, 35]}},
|
|
"an L section (6 sides) extruded along X: 8 faces; the coplanar back and end faces merge", base=B1)
|
|
C2 = up(T2, "020-part-back-wall")
|
|
V2 = VB + 9000
|
|
case(T2, "021-holes-touching-at-a-point", "two through holes r5 whose circles touch at one point (30, 20)",
|
|
[cyl([25, 20, -1], 5, 22, operation="cut"), cyl([35, 20, -1], 5, 22, operation="cut")],
|
|
{"body_count": 1, "volume_mm3": VB - 2 * PI * 25 * 20, "faces": 8},
|
|
"V = 60 40 20 - 2 pi 5^2 20; faces: 6 of the box + 2 bores (top and bottom each one loop round both holes, through their common vertex twice)", base=B1)
|
|
# The tool's square 1.5 x 1.5 outside r 1.6 (the hole wall): A1 = int_x0^1.5 (1.5 - sqrt(1.6^2 - x^2)) dx, x0 = sqrt(1.6^2 - 1.5^2).
|
|
x0 = math.sqrt(2.56 - 2.25)
|
|
Fc = lambda x: (x * math.sqrt(2.56 - x * x) + 2.56 * math.asin(x / 1.6)) / 2
|
|
A1 = 1.5 * (1.5 - x0) - (Fc(1.5) - Fc(x0))
|
|
case(T2, "022-cylinder-grazing-a-hole-edge",
|
|
"a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result'",
|
|
[box([-6, -6, -5], 12, 12, 5.1, body_name="Part"), cyl([0, 0, -4], 1.6, 4.1, operation="cut"),
|
|
box([0, 0, -3.9], 1.5, 1.5, 7.1, operation="new", body_name="Tool"), cyl([0.0003, 0, -4], 1.5, 7.5, operation="cut", targets=["Tool"]),
|
|
C("solid.combine", target="Part", tools=["Tool"], operation="cut")],
|
|
{"body_count": 1, "volume_mm3": 734.4 - PI * 1.6 ** 2 * 4.1 - A1 * 4.0},
|
|
"part 12x12x5.1 = 734.4 minus the hole pi*1.6^2*4.1 = 32.97 (hole z -4..0.1, part top z 0.1). The tool (z -3.9..3.2, the square 1.5x1.5 where r >= 1.5) overlaps solid only where r >= 1.6: "
|
|
"area A1 = integral_0^1.5 (1.5 - min(1.5, sqrt(2.56-x^2))) dx = 0.31409, over the 4.0 mm of shared z: 1.25638 mm3 (the 0.0003 offset moves this by about 3e-3). "
|
|
"V = 734.4 - 32.9662 - 1.2564 = 700.1695. Reduced from the report's STEP geometry (no pocket or rotation); the answer is for this geometry",
|
|
sources=["tangency-labs/solidcraft#1279"])
|
|
def arc_c(center, start, sweep):
|
|
return C("sketch.arc.center_point", center=center, start=start, sweep=sweep)
|
|
case(T2, "023-lips-1e-4-off-the-walls-joined",
|
|
"two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: "
|
|
"the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction",
|
|
[C("sketch.create", plane="XY", name="Base"),
|
|
line([[5, -10], [5, 10]]), arc_c([0, 10], [5, 10], 180), line([[-5, 10], [-5, -10]]), arc_c([0, -10], [-5, -10], 180),
|
|
line([[3, -10], [3, 10]]), arc_c([0, 10], [3, 10], 180), line([[-3, 10], [-3, -10]]), arc_c([0, -10], [-3, -10], 180),
|
|
C("sketch.finish"),
|
|
C("solid.extrude", sketch="Base", profiles=[{"point": [4, 0]}], distance=2, operation="new", body_name="Base"),
|
|
C("sketch.create", plane="XY", offset=2, name="Lips"),
|
|
arc_c([0.0001, 10], [5.0001, 10], 180), line([[-4.9999, 10], [-3.9999, 10]]), arc_c([0.0001, 10], [-3.9999, 10], -180), line([[4.0001, 10], [5.0001, 10]]),
|
|
arc_c([-0.0001, -10], [-5.0001, -10], 180), line([[4.9999, -10], [3.9999, -10]]), arc_c([-0.0001, -10], [3.9999, -10], -180), line([[-4.0001, -10], [-5.0001, -10]]),
|
|
C("sketch.finish"),
|
|
C("solid.extrude", sketch="Lips", distance=18, operation="join", profiles="all")],
|
|
{"body_count": 1, "volume_mm3": 160 + 194 * PI},
|
|
"base area = 2 straight rails (2 x 20) x 2 + full annulus pi(25-9) = 80 + 16 pi, times 2 mm = 160 + 32 pi. Each lip is a half annulus pi(25-16)/2 = 4.5 pi, two lips x 18 mm = 162 pi. "
|
|
"The lips sit above z=2, the base is below, so nothing overlaps (the crescent overhang is above z=2 too): V = 160 + 194 pi = 769.469. One body",
|
|
sources=["tangency-labs/solidcraft#2928"])
|
|
case(T2, "024-wall-halves-merged-into-a-flange",
|
|
"the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: \"the selected planar face no longer exists\")",
|
|
sketch(vplane([0.0, 0.0, 0.0]), C("sketch.line", points=[[8, 0], [30, 0], [30, 6], [18, 6], [18, 22], [8, 22]], infer=False, closed=True), name="P")
|
|
+ [C("solid.revolve", axis="Z", angle="360 deg", operation="new", body_name="Hub"),
|
|
C("solid.extrude", face=[12, 12 * math.sqrt(3), 6], distance=5, operation="join")],
|
|
{"body_count": 1, "volume_mm3": PI * ((900 - 64) * 6 + (324 - 64) * 16) + PI * (900 - 324) * 5},
|
|
"hub = revolve of (8,0) (30,0) (30,6) (18,6) (18,22) (8,22) about Z: V = pi [(30^2 - 8^2) 6 + (18^2 - 8^2) 16] = 28826.6. "
|
|
"Extruding the whole annulus z = 6, r 18..30 outward (upward) 5 mm adds pi (30^2 - 18^2) 5 = 9047.8 (the new ring sits on the flange and touches the hub wall r = 18).",
|
|
sources=["tangency-labs/solidcraft#726", "tangency-labs/solidcraft#494", "tangency-labs/solidcraft#2114"])
|
|
# 18 chords across a disc r37; the layers' regions between them, four bands left out of the second layer.
|
|
CHORD_Y = [-32, -29, -24, -21, -16, -13, -8, -5, 0, 3, 8, 11, 16, 19, 24, 27, 32, 35]
|
|
BANDS = [(-29, -24), (-13, -8), (8, 11), (24, 27)]
|
|
def chords(name):
|
|
return sketch("XY", C("sketch.circle.center", center=[0, 0], radius=37),
|
|
*[line([[-math.sqrt(1369 - y * y), y], [math.sqrt(1369 - y * y), y]]) for y in CHORD_Y], name=name)
|
|
ys = [-37] + CHORD_Y + [37]
|
|
picks = [{"point": [0, (a + b) / 2]} for a, b in zip(ys, ys[1:]) if (a, b) not in BANDS]
|
|
band_area = sum(quad(lambda y: 2 * math.sqrt(1369 - y * y), a, b) for a, b in BANDS)
|
|
case(T2, "025-flush-chord-layers-joined",
|
|
"a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) "
|
|
"joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid",
|
|
chords("S1") + chords("S3")
|
|
+ sketch("XY", C("sketch.circle.center", center=[0, 0], radius=37), C("sketch.circle.center", center=[0, 0], radius=35), name="Rings")
|
|
+ [C("solid.extrude", sketch="Rings", profiles="all", distance=1.2, direction="negative", body_name="Body1"),
|
|
C("solid.extrude", sketch="S1", profiles=picks, distance=2.4, direction="negative", **{"from": [0, 0, -1.2]}, operation="join"),
|
|
C("solid.extrude", sketch="Rings", profiles=[{"point": [36, 0]}], distance=2, direction="negative", **{"from": [36, 0, -3.6]}, operation="new", body_name="Body2"),
|
|
C("solid.extrude", sketch="S3", profiles="all", distance=2.4, direction="negative", **{"from": [36, 0, -5.6]}, operation="new", body_name="Body3"),
|
|
C("solid.combine", target="Body2", tools=["Body3"], operation="join"),
|
|
C("solid.combine", target="Body1", tools=["Body2"], operation="join")],
|
|
{"body_count": 1, "shells": 1, "volume_mm3": PI * 1369 * 1.2 + (PI * 1369 - band_area) * 2.4 + PI * (1369 - 1225) * 2 + PI * 1369 * 2.4},
|
|
"the layers only meet face to face, so V is their sum: Body1 = pi 37^2 1.2 + (pi 37^2 - the four bands y -29..-24, -13..-8, 8..11, 24..27 of the disc, Int 2 sqrt(37^2 - y^2) dy) 2.4; "
|
|
"Body2 = pi (37^2-35^2) 2; Body3 = pi 37^2 2.4. The bands run out to the rim, so the space inside r35 under Body1 opens to the outside: one shell (the reporter's 52-command script, generic dimensions)",
|
|
sources=["tangency-labs/solidcraft#5197", "tangency-labs/solidcraft#3396"])
|
|
|
|
# ---------------------------------------------------------------- 03 analytic profiles
|
|
A = 2400 + PI * 400 / 2
|
|
case(T3, "001-extrude-rect-with-arc-end", "a 60x40 profile with a semicircular end r20, extruded 20",
|
|
sketch("XY", line([[60, 40], [0, 40], [0, 0], [60, 0]]), C("sketch.arc.three_point", start=[60, 0], end=[60, 40], through=[80, 20])) + [C("solid.extrude", distance=20)],
|
|
{"body_count": 1, "volume_mm3": A * 20, "area_mm2": 2 * A + 20 * (60 + 40 + 60 + PI * 20), "faces": 6},
|
|
"A = 60*40 + pi 20^2 / 2; V = 20 A; sides: 3 planes and a half cylinder")
|
|
case(T3, "002-extrude-annulus", "an annulus r20/r10 extruded 15",
|
|
sketch("XY", C("sketch.circle.center", center=[0, 0], radius=20), C("sketch.circle.center", center=[0, 0], radius=10)) + [C("solid.extrude", distance=15, profiles=[{"point": [15, 0]}])],
|
|
{"body_count": 1, "volume_mm3": PI * 300 * 15, "area_mm2": 2 * PI * 300 + 2 * PI * 30 * 15, "faces": 4},
|
|
"V = pi (20^2 - 10^2) 15; faces: two annuli, two cylinders")
|
|
rt = 10 - 20 * math.tan(math.radians(5))
|
|
case(T3, "003-extrude-tapered-circle", "a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum",
|
|
sketch("XY", C("sketch.circle.center", center=[0, 0], radius=10)) + [C("solid.extrude", distance=20, taper=-5)],
|
|
{"body_count": 1, "volume_mm3": PI * 20 / 3 * (100 + 10 * rt + rt * rt), "faces": 3},
|
|
f"positive taper grows outward (tests/oracle/05): top radius 10 - 20 tan5 = {rt:.9f}; V = pi h/3 (R^2 + R r + r^2)")
|
|
case(T3, "004-revolve-full-off-axis", "a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube",
|
|
sketch(vplane([0, 0, 0]), line([[10, 0], [20, 0], [20, 30], [10, 30]], closed=True)) + [C("solid.revolve", axis="Z")],
|
|
{"body_count": 1, "volume_mm3": PI * 300 * 30, "area_mm2": 2 * PI * 300 + 2 * PI * 30 * 30, "faces": 4},
|
|
"V = pi (20^2 - 10^2) 30; faces: two annuli, two cylinders")
|
|
case(T3, "005-revolve-touching-axis-hemisphere", "a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere",
|
|
sketch(vplane([0, 0, 0]), line([[0, 20], [0, 0], [20, 0]]), C("sketch.arc.center_point", center=[0, 0], start=[20, 0], end=[0, 20])) + [C("solid.revolve", axis="Z")],
|
|
{"body_count": 1, "volume_mm3": 2 / 3 * PI * 8000, "area_mm2": 3 * PI * 400, "faces": 2},
|
|
"V = 2/3 pi r^3; A = 2 pi r^2 + pi r^2; the profile edge on the axis makes no face")
|
|
case(T3, "006-revolve-partial-90", "a 10x10 rectangle 10 mm off the axis revolved 90 deg",
|
|
sketch(vplane([0, 0, 0]), line([[10, 0], [20, 0], [20, 10], [10, 10]], closed=True)) + [C("solid.revolve", axis="Z", angle=90)],
|
|
{"body_count": 1, "volume_mm3": PI * 300 * 10 / 4, "faces": 6},
|
|
"a quarter of the tube: V = (90/360) pi (20^2 - 10^2) 10; faces: 2 ends, 2 cylinders, top, bottom")
|
|
case(T3, "007-revolve-180-touching-axis", "a 15x20 rectangle on the axis revolved 180 deg: a half cylinder",
|
|
sketch(vplane([0, 0, 0]), line([[0, 0], [15, 0], [15, 20], [0, 20]], closed=True)) + [C("solid.revolve", axis="Z", angle=180)],
|
|
{"body_count": 1, "volume_mm3": PI * 225 * 20 / 2, "area_mm2": PI * 225 + PI * 15 * 20 + 30 * 20, "faces": 4},
|
|
"V = pi r^2 h / 2; the two end rectangles are coplanar and meet on the axis: one 30x20 face; + half disks top and bottom + half cylinder")
|
|
case(T3, "008-extrude-slot", "a slot (centres 40 apart, width 20) extruded 10",
|
|
sketch("XY", C("sketch.slot.center_to_center", p0=[0, 0], p1=[40, 0], width=20)) + [C("solid.extrude", distance=10)],
|
|
{"body_count": 1, "volume_mm3": (800 + PI * 100) * 10, "area_mm2": 2 * (800 + PI * 100) + 10 * (80 + 2 * PI * 10), "faces": 6},
|
|
"A = 40*20 + pi 10^2; faces: 2 planes, 2 half cylinders, top, bottom")
|
|
Vboss = PI * 64 * 10
|
|
Aslot = 15 * 8 + PI * 16
|
|
case(T3, "009-part-boss-and-slot", "the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base",
|
|
sketch(vplane([15, 15, 0]), line([[0, 20], [8, 20], [8, 30], [0, 30]], ids=["b", "s", "t", "ax"], closed=True)) + [C("solid.revolve", axis="ax", operation="join", targets=["Part"], name="Boss")]
|
|
+ sketch("XY", C("sketch.slot.center_to_center", p0=[35, 10], p1=[50, 10], width=8)) + [C("solid.extrude", distance=20, operation="cut", targets=["Part"], name="Slot")],
|
|
{"body_count": 1, "volume_mm3": V2 + Vboss - 20 * Aslot, "faces": 14},
|
|
"back-wall part (57000) + pi 8^2 10 - 20 (15*8 + pi 4^2); faces 8 + boss side and top + slot's 2 planes and 2 half cylinders", base=C2)
|
|
C3 = up(T3, "009-part-boss-and-slot")
|
|
V3 = V2 + Vboss - 20 * Aslot
|
|
case(T3, "010-revolve-horn-torus-270",
|
|
"the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees",
|
|
sketch(vplane([0.0, 0.0, 0.0]), C("sketch.arc.center_point", center=[14, 0], start=[14, -14], end=[14, 14]),
|
|
C("sketch.line", points=[[14, 14], [14, -14]], infer=False), name="P")
|
|
+ [C("solid.revolve", axis="Z", angle="270 deg", operation="new")],
|
|
{"body_count": 1, "volume_mm3": 270 / 360 * 2 * PI * (14 + 4 * 14 / (3 * PI)) * PI * 196 / 2},
|
|
"Pappus: the half disc (the side away from the axis) has area pi 14^2 / 2 and centroid at 14 + 4 * 14 / (3 pi) from the axis: "
|
|
"V = (270/360) 2 pi (14 + 4*14/(3 pi)) pi 14^2 / 2 = 28932.2 (the design measures 28930.7).",
|
|
sources=["tangency-labs/solidcraft#4007"])
|
|
|
|
# ---------------------------------------------------------------- 04 spline profiles
|
|
P = [[40, 10], [30, 30], [10, 30], [0, 10]]
|
|
Ab = 40 * 10 + bez_area_under(P, 10)
|
|
case(T4, "001-extrude-bezier-arch", "a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10",
|
|
sketch("XY", line([[0, 10], [0, 0], [40, 0], [40, 10]]), C("sketch.spline.control_point", points=P)) + [C("solid.extrude", distance=10)],
|
|
{"body_count": 1, "volume_mm3": Ab * 10, "faces": 6, "bbox": {"min": [0, 0, 0], "max": [40, 25, 10]}},
|
|
"a 4-point cubic control-point spline is one Bezier segment; A = 400 + int (y-10) dx over the arch (Green, exact Gauss) = %.9f; max y = 10 + 0.75*20" % Ab)
|
|
Q = [[20, 0], [30, 10], [10, 20], [15, 30]]
|
|
Vq = PI * quad(lambda t: bez(Q, t)[0] ** 2 * dbez(Q, t)[1], 0, 1)
|
|
Aq = PI * 400 + PI * 225 + 2 * PI * quad_split(lambda t: bez(Q, t)[0] * norm(dbez(Q, t)), 0, 1, 50)
|
|
case(T4, "002-revolve-bezier-profile", "a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z",
|
|
sketch(vplane([0, 0, 0]), line([[15, 30], [0, 30], [0, 0], [20, 0]]), C("sketch.spline.control_point", points=Q)) + [C("solid.revolve", axis="Z")],
|
|
{"body_count": 1, "volume_mm3": Vq, "area_mm2": Aq, "faces": 3},
|
|
"z(t) = 30 t is linear, so V = pi int r(t)^2 z'(t) dt (exact Gauss) = %.9f; A = disks pi 20^2 + pi 15^2 + 2 pi int r |B'| dt" % Vq)
|
|
W = [[0, 0], [0, 20], [20, 20], [20, 40]]
|
|
Lw = bez_len(W)
|
|
assert bez_min_radius(W) > 3
|
|
case(T4, "003-pipe-along-bezier", "a pipe d4 along a planar Bezier path",
|
|
sketch(vplane([0, 0, 0]), C("sketch.spline.control_point", points=W), name="Path") + [C("solid.pipe", path_sketch="Path", path=["s1"], diameter=4)],
|
|
{"body_count": 1, "volume_mm3": PI * 4 * Lw, "area_mm2": 2 * PI * 2 * Lw + 2 * PI * 4},
|
|
f"a disk swept square to a planar path whose curvature radius stays above {bez_min_radius(W):.2f} > 2: V = pi r^2 L, A = 2 pi r L + 2 pi r^2, L = {Lw:.9f}")
|
|
case(T4, "004-sweep-square-along-bezier", "a 4x4 square swept along the same Bezier path",
|
|
sketch(vplane([0, 0, 0]), C("sketch.spline.control_point", points=W), name="Path")
|
|
+ sketch("XY", C("sketch.rectangle.center", center=[0, 0], corner=[2, 2]), name="Square")
|
|
+ [C("solid.sweep", sketch="Square", path_sketch="Path", path=["s1"])],
|
|
{"body_count": 1, "volume_mm3": 16 * Lw, "area_mm2": 16 * Lw + 2 * 16},
|
|
"the square's centre is on the planar path and it stays square to it: V = A L; side faces: the inner and outer walls have s(L -/+ a dtheta), the two others s L each, total 4 s L; + 2 ends")
|
|
case(T4, "005-loft-square-frustum", "a loft between a 40 square at z=0 and a 20 square at z=30",
|
|
sketch("XY", C("sketch.rectangle.center", center=[0, 0], corner=[20, 20]), name="S0")
|
|
+ sketch(plane([0, 0, 30], [1, 0, 0], [0, 1, 0]), C("sketch.rectangle.center", center=[0, 0], corner=[10, 10]), name="S1")
|
|
+ [C("solid.loft", sections=[{"sketch": "S0"}, {"sketch": "S1"}])],
|
|
{"body_count": 1, "volume_mm3": 30 / 3 * (1600 + 400 + 800), "area_mm2": 1600 + 400 + 4 * 30 * math.hypot(30, 10), "faces": 6},
|
|
"two sections loft ruled: a square frustum, V = h/3 (A0 + A1 + sqrt(A0 A1)); sides 4 trapezoids (40+20)/2 * sqrt(30^2+10^2)")
|
|
case(T4, "006-loft-circle-frustum", "a loft between circles r20 at z=0 and r10 at z=30",
|
|
sketch("XY", C("sketch.circle.center", center=[0, 0], radius=20), name="S0")
|
|
+ sketch(plane([0, 0, 30], [1, 0, 0], [0, 1, 0]), C("sketch.circle.center", center=[0, 0], radius=10), name="S1")
|
|
+ [C("solid.loft", sections=[{"sketch": "S0"}, {"sketch": "S1"}])],
|
|
{"body_count": 1, "volume_mm3": PI * 30 / 3 * 700, "faces": 3},
|
|
"a ruled loft between coaxial circles is a cone frustum: V = pi h/3 (R^2 + R r + r^2)")
|
|
r3c = lambda z: 10 + (z - 20) ** 2 / 40
|
|
case(T4, "007-loft-three-circles", "a smooth loft through circles r20, r10, r20 at z = 0, 20, 40",
|
|
sketch("XY", C("sketch.circle.center", center=[0, 0], radius=20), name="S0")
|
|
+ sketch(plane([0, 0, 20], [1, 0, 0], [0, 1, 0]), C("sketch.circle.center", center=[0, 0], radius=10), name="S1")
|
|
+ sketch(plane([0, 0, 40], [1, 0, 0], [0, 1, 0]), C("sketch.circle.center", center=[0, 0], radius=20), name="S2")
|
|
+ [C("solid.loft", sections=[{"sketch": "S0"}, {"sketch": "S1"}, {"sketch": "S2"}])],
|
|
{"body_count": 1, "tolerance": {"rel": 1e-5}, "volume_mm3": PI * quad(lambda z: r3c(z) ** 2, 0, 40), "area_mm2": 800 * PI + 2 * PI * quad(lambda z: r3c(z) * math.sqrt(1 + ((z - 20) / 20) ** 2), 0, 40),
|
|
"faces": 3, "edges": 3, "vertices": 2, "center_of_mass": [0, 0, 20], "bbox": {"min": [-20, -20, 0], "max": [20, 20, 40]}},
|
|
"three sections loft smooth at degree 2 (crates/kernel/src/smlib_sweeps.rs, loft: ruled from two, quadratic from three), through equally spaced, "
|
|
"concentric circles: every row of control points is interpolated by the same quadratic in the loft parameter, so each section of the loft is a circle, "
|
|
"r(z) = 10 + (z - 20)^2 / 40 (the quadratic through r 20, 10, 20 at z 0, 20, 40; z is linear in the parameter). V = pi int r^2 dz = 22400 pi / 3; "
|
|
"A = 2 pi 20^2 + 2 pi int r sqrt(1 + r'^2) dz (Gauss, exact on the polynomial volume). Faces: two disks and the lofted face; edges: the two circles and the seam; "
|
|
"vertices: one on each circle. Centre of mass (0, 0, 20) by symmetry; bbox: r <= 20 (the quadratic's maximum is at the ends)")
|
|
# 008: one side x = 20 (y -20..20, linear) ruled to the arc -45..45 deg of r10 (rational quadratic); four alike.
|
|
def quarter_arc(t, w=math.cos(PI / 4)):
|
|
c, s = 10 * math.cos(PI / 4), 10 * math.sin(PI / 4)
|
|
D = (1 - t) ** 2 + 2 * w * t * (1 - t) + t * t
|
|
N = ((1 - t) ** 2 * c + 2 * w * t * (1 - t) * 10 / math.cos(PI / 4) + t * t * c, ((1 - t) ** 2 * -s + t * t * s))
|
|
dD = -2 * (1 - t) + 2 * w * (1 - 2 * t) + 2 * t
|
|
dN = (-2 * (1 - t) * c + 2 * w * (1 - 2 * t) * 10 / math.cos(PI / 4) + 2 * t * c, 2 * (1 - t) * s + 2 * t * s)
|
|
return [N[k] / D for k in range(2)], [(dN[k] * D - N[k] * dD) / D ** 2 for k in range(2)]
|
|
def mixed(t):
|
|
(x1, y1), (dx1, dy1) = quarter_arc(t)
|
|
x0, y0, dx0, dy0 = 20, -20 + 40 * t, 0, 40
|
|
return (x0 * dy1 - y0 * dx1 + x1 * dy0 - y1 * dx0) / 4
|
|
Msq = 4 * quad_split(mixed, 0, 1, 20, 32)
|
|
case(T4, "008-loft-square-to-circle", "a loft from a 40 square at z=0 to a circle r10 at z=30",
|
|
sketch("XY", C("sketch.rectangle.center", center=[0, 0], corner=[20, 20]), name="S0")
|
|
+ sketch(plane([0, 0, 30], [1, 0, 0], [0, 1, 0]), C("sketch.circle.center", center=[0, 0], radius=10), name="S1")
|
|
+ [C("solid.loft", sections=[{"sketch": "S0"}, {"sketch": "S1"}])],
|
|
{"body_count": 1, "tolerance": {"rel": 1e-5}, "volume_mm3": 10 * (1600 + 100 * PI + Msq), "center_of_mass": [0, 0, 30 * (1600 / 12 + Msq / 6 + 100 * PI / 4) / ((1600 + Msq + 100 * PI) / 3)],
|
|
"faces": 6, "edges": 12, "vertices": 8, "bbox": {"min": [-20, -20, 0], "max": [20, 20, 30]}},
|
|
"two sections loft ruled; the circle is split at the square's corner directions (45 deg + k 90 deg) into four quarter arcs, and each side is ruled to its arc "
|
|
"at equal parameter (the side's linear one, the arc's standard rational quadratic, weights 1, cos45, 1). A section at height s h is the curve (1-s) C0 + s C1, "
|
|
"whose area is (1-s)^2 A0 + 2 s (1-s) M + s^2 A1 (M = 1/4 loop int (C0 x dC1 + C1 x dC0), Gauss) = %.9f: V = h (A0 + M + A1)/3, z_c = h (A0/12 + M/6 + A1/4) / ((A0 + M + A1)/3), "
|
|
"A0 = 1600, A1 = 100 pi. (Pairing the side with the arc by its angle instead gives M = 720.2, V 0.13%% more; by the arc's weights 727.1, 0.39%% more.) "
|
|
"Faces: the two caps and four ruled sides; edges 4 + 4 + the four rulings from the corners; vertices 4 + 4; on the axis by the four-fold symmetry" % Msq)
|
|
FIT = [[20, 0], [10, 17], [-10, 17], [-20, 0], [-10, -17], [10, -17]]
|
|
spans = cyclic_spline(FIT)
|
|
Afit = sum(quad(lambda s: 0.5 * (f(s)[0][0] * f(s)[1][1] - f(s)[1][0] * f(s)[0][1]), 0, hh, 16) for hh, f in spans)
|
|
Lfit = sum(quad_split(lambda s: math.hypot(f(s)[0][1], f(s)[1][1]), 0, hh, 20, 16) for hh, f in spans)
|
|
hh1, f1 = spans[1] # the span (10, 17) -> (-10, 17): y' = 0 at its middle by symmetry
|
|
Yfit = f1(hh1 / 2)[1][0]
|
|
assert abs(f1(hh1 / 2)[1][1]) < 1e-12
|
|
case(T4, "009-extrude-periodic-fit-spline", "a closed periodic fit-point spline through 6 points, extruded 10",
|
|
sketch("XY", C("sketch.spline.fit_point", points=[[20, 0], [10, 17], [-10, 17], [-20, 0], [-10, -17], [10, -17]], periodic=True)) + [C("solid.extrude", distance=10)],
|
|
{"body_count": 1, "tolerance": {"rel": 1e-5}, "volume_mm3": 10 * Afit, "area_mm2": 2 * Afit + 10 * Lfit, "center_of_mass": [0, 0, 5], "faces": 8, "edges": 18, "vertices": 12,
|
|
"bbox": {"min": [-20, -Yfit, 0], "max": [20, Yfit, 10]}},
|
|
"a periodic fit spline is the cyclic C2 cubic through its points with chord-length knots (crates/sketch/src/periodic.rs); A = 1/2 loop int (x y' - y x') over its six spans "
|
|
"(Gauss, exact on the polynomials) = %.9f, its length L by Gauss = %.9f; V = 10 A, area 2 A + 10 L. Faces: one side face per span + the caps; edges 6 + 6 + 6 vertical; "
|
|
"vertices 12. The points are symmetric about both axes, so the curve is: x reaches 20 at (+-20, 0) (vertical tangent there), y reaches %.9f between (10, 17) and (-10, 17); "
|
|
"centre of mass (0, 0, 5)" % (Afit, Lfit, Yfit))
|
|
Pw = [[40, 22], [37, 34], [23, 34], [20, 22]]
|
|
Awin = bez_area_under(Pw, 22)
|
|
case(T4, "010-part-bezier-window", "the running part: a Bezier-arched window cut through the back wall",
|
|
sketch(plane([0, 40, 0], [1, 0, 0], [0, 0, 1]), line([[20, 22], [40, 22]]), C("sketch.spline.control_point", points=Pw)) + [C("solid.extrude", distance=10, operation="cut", targets=["Part"], name="Window")],
|
|
{"body_count": 1, "volume_mm3": V3 - 10 * Awin, "faces": 16},
|
|
"the arch over z=22 from x=20 to 40 rises to z = 22 + 0.75*12 = 31, under the wall top (35): removed 10 * %.9f; + window floor and arch faces" % Awin, base=C3)
|
|
C4 = up(T4, "010-part-bezier-window")
|
|
V4 = V3 - 10 * Awin
|
|
# 011: every outline of the reporter's script has its 48 vertices on the rays k 7.5 deg.
|
|
secs = {}
|
|
for c in PLEATED_SKINS:
|
|
if c["command"] == "sketch.create":
|
|
name, z = c["params"]["name"], float(c["params"]["offset"])
|
|
if c["command"] == "sketch.line":
|
|
pts = c["params"]["points"]
|
|
for k, p in enumerate(pts):
|
|
ang = math.atan2(p[1], p[0]) % (2 * PI)
|
|
assert abs(ang - k * PI / 24) < 1e-4 or abs(ang - k * PI / 24 + 2 * PI) < 1e-4, (name, k, ang)
|
|
secs[name] = (z, [math.hypot(*p) for p in pts])
|
|
NP, AL = 48, PI / 24
|
|
def loft(lo, hi):
|
|
(z0, r0), (z1, r1) = secs[lo], secs[hi]
|
|
return lambda z: [a + (b - a) * (z - z0) / (z1 - z0) for a, b in zip(r0, r1)]
|
|
co, ci, lo_, li = loft("ConeLo", "ConeHi"), loft("ConeInLo", "ConeInHi"), loft("LipLo", "LipHi"), loft("LipInLo", "LipInHi")
|
|
def star_area(r):
|
|
return 0.5 * math.sin(AL) * sum(r[k] * r[(k + 1) % NP] for k in range(NP))
|
|
def simpson(f, a, b):
|
|
return (b - a) / 6 * (f(a) + 4 * f((a + b) / 2) + f(b))
|
|
Vc = simpson(lambda z: star_area(co(z)) - star_area(ci(z)), -1, 88.3)
|
|
Vl = simpson(lambda z: star_area(lo_(z)) - star_area(li(z)), -1, 6)
|
|
for z in [-1 + 0.01 * i for i in range(731)]:
|
|
assert all(a < b for a, b in zip(ci(z), co(z))) and all(a < b for a, b in zip(li(z), lo_(z)))
|
|
def inv(ra, rb): # 1/r(phi) = A sin(phi) + B sin(AL - phi), with r(0) = ra, r(AL) = rb
|
|
return (1 / (rb * math.sin(AL)), 1 / (ra * math.sin(AL)))
|
|
def rad(L, ph):
|
|
return 1 / (L[0] * math.sin(ph) + L[1] * math.sin(AL - ph))
|
|
def tri(L, a, b):
|
|
return 0.5 * rad(L, a) * rad(L, b) * math.sin(b - a)
|
|
def overlap_area(z):
|
|
R = [co(z), ci(z), lo_(z), li(z)]
|
|
tot = 0.0
|
|
for k in range(NP):
|
|
Ls = [inv(r[k], r[(k + 1) % NP]) for r in R]
|
|
cuts = [0.0, AL]
|
|
for i in range(4):
|
|
for j in range(i + 1, 4):
|
|
dA, dB = Ls[i][0] - Ls[j][0], Ls[i][1] - Ls[j][1]
|
|
# dA sin(ph) + dB sin(AL - ph) = 0
|
|
den = dA - dB * math.cos(AL)
|
|
ph = math.atan2(-dB * math.sin(AL), den) % PI
|
|
if 0 < ph < AL:
|
|
cuts.append(ph)
|
|
cuts.sort()
|
|
for a, b in zip(cuts, cuts[1:]):
|
|
m = (a + b) / 2
|
|
out = min((0, 2), key=lambda i: rad(Ls[i], m))
|
|
inn = max((1, 3), key=lambda i: rad(Ls[i], m))
|
|
if rad(Ls[out], m) > rad(Ls[inn], m):
|
|
tot += tri(Ls[out], a, b) - tri(Ls[inn], a, b)
|
|
return tot
|
|
Vov = sum(quad(overlap_area, -1 + 7 * i / 400, -1 + 7 * (i + 1) / 400, 8) for i in range(400))
|
|
case(T4, "011-crossing-pleated-loft-skins-joined",
|
|
"a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: "
|
|
"truck panicked ('tolerance must be no less than 1e-6') or gave no result",
|
|
PLEATED_SKINS, {"body_count": 1, "volume_mm3": Vc + Vl - Vov, "faces": 388, "bbox": {"min": [-120, -120, -1], "max": [120, 120, 88.3]}, "tolerance": {"rel": 1e-5}},
|
|
"the reporter's own script (pleated_union.py, 24 pleats). Every outline has its 48 vertices on the rays k 7.5 deg, so each ruled loft's section at height z is the star polygon "
|
|
"with the radii interpolated linearly along those rays (its faces are bilinear between straight edges), of area 1/2 sin7.5 sum r_k r_k+1, quadratic in z (Simpson exact). "
|
|
"Each skin is its loft less the inner loft, which lies inside it on every ray over the skin's height and runs a mm past both ends: cone skin %.6f, lip skin %.6f. "
|
|
"They cross between z = -0.88 and 0.28; their common part, per wedge between two rays the region between the larger inner and the smaller outer straight edge "
|
|
"(cut where edges cross, exact triangles), integrated over z by Gauss: %.6f. V = cone + lip - common. Faces: the four sets of 48 sides each cut in two by the crossing, + the "
|
|
"four end annuli (the two bottoms at z = -1 apart: r 114.69..115.79 and 113.35..114.44). Bbox: the lip's top outline reaches r 120 on the axes, the cone runs z -1..88.3"
|
|
% (Vc, Vl, Vov),
|
|
source="analytic", sources=["tangency-labs/solidcraft#4623", "tangency-labs/solidcraft#4180", "tangency-labs/solidcraft#4881"])
|
|
# 012: the union's length along y at each (x, z), integrated over x and z (Gauss on panels split at the pieces' bounds).
|
|
# rib outline in (y, z): corners rounded r1.5; pieces: ('l', p, q) or ('a', centre)
|
|
RIB = [((18.0, 37.5), (19.5, 36.0), (19.5, 37.5)), ((19.5, 36.0), (24.4516191451179, 36.0), None),
|
|
((24.4516191451179, 36.0), (25.20742568340403, 38.79566835134765), (24.4516191451179, 37.5)),
|
|
((25.20742568340403, 38.79566835134765), (20.25580653828613, 41.68411285266642), None),
|
|
((20.25580653828613, 41.68411285266642), (18.0, 40.38844450131877), (19.5, 40.38844450131877)), ((18.0, 40.38844450131877), (18.0, 37.5), None)]
|
|
def rib_span(z):
|
|
ys = []
|
|
for p, q, c in RIB:
|
|
if c is None:
|
|
if (p[1] - z) * (q[1] - z) <= 0 and p[1] != q[1]:
|
|
ys.append(p[0] + (q[0] - p[0]) * (z - p[1]) / (q[1] - p[1]))
|
|
elif p[1] == q[1] == z:
|
|
ys += [p[0], q[0]]
|
|
else:
|
|
r = math.dist(p, c); dz = z - c[1]
|
|
if abs(dz) <= r:
|
|
for s in (-1, 1):
|
|
y = c[0] + s * math.sqrt(r * r - dz * dz)
|
|
# on the arc: within the angular range between p and q (quarter-ish arcs, < 180 deg)
|
|
a0, a1, a = (math.atan2(v[1] - c[1], v[0] - c[0]) for v in (p, q, (y, z)))
|
|
span = (a1 - a0) % (2 * PI); off = (a - a0) % (2 * PI)
|
|
if span > PI: span, off = 2 * PI - span, (a0 - a) % (2 * PI)
|
|
if off <= span + 1e-12:
|
|
ys.append(y)
|
|
return (min(ys), max(ys)) if ys else None
|
|
def body(x, z):
|
|
if z < 21: a, b = 18, 18
|
|
elif z < 38: s = (z - 21) / 17; a, b = 18 + 12 * s, 18 + 2 * s
|
|
else: a, b = 30, 20
|
|
return b * math.sqrt(1 - x * x / (a * a)) if abs(x) < a else None
|
|
def in_pad(x, z):
|
|
if abs(x) > 8 or z < 36 or z > 59: return False
|
|
cx, cz = min(max(abs(x), 0), 5), min(max(z, 39), 56)
|
|
return math.hypot(abs(x) - cx, z - cz) <= 3 if (abs(x) > 5 and (z < 39 or z > 56)) else True
|
|
def length(x, z):
|
|
iv = []
|
|
yb = body(x, z)
|
|
if yb is not None: iv.append((-yb, yb))
|
|
if abs(x) <= 5 and abs(z - 47) < 12:
|
|
h = math.sqrt(144 - (z - 47) ** 2); iv.append((30 - h, 30 + h))
|
|
if 4 <= abs(x) <= 8:
|
|
s = rib_span(z)
|
|
if s: iv.append(s)
|
|
if in_pad(x, z): iv.append((18, 25))
|
|
iv.sort(); tot, cur = 0.0, None
|
|
for a, b in iv:
|
|
if cur is None or a > cur[1]:
|
|
if cur: tot += cur[1] - cur[0]
|
|
cur = [a, b]
|
|
else: cur[1] = max(cur[1], b)
|
|
return tot + (cur[1] - cur[0] if cur else 0)
|
|
XB = [0, 4, 5, 8, 18, 30]; ZB = [0, 21, 35, 36, 36.0 + 1e-9, 38, 39, 41.68411285266642, 56, 59, 64]
|
|
def vol(nx, nz):
|
|
tot = 0.0
|
|
for x0, x1 in zip(XB, XB[1:]):
|
|
for z0, z1 in zip(ZB, ZB[1:]):
|
|
# body edge x = a(z) is curved for 21 < z < 38 beyond x 18: split x finely there
|
|
fx = lambda x: sum(quad(lambda z: length(x, z), z0 + (z1 - z0) * j / nz, z0 + (z1 - z0) * (j + 1) / nz, 6) for j in range(nz))
|
|
tot += sum(quad(fx, x0 + (x1 - x0) * i / nx, x0 + (x1 - x0) * (i + 1) / nx, 6) for i in range(nx))
|
|
return 2 * tot
|
|
Vcap = vol(48, 48)
|
|
case(T4, "012-loft-ribs-joined-to-a-rounded-pad", "the same without the top flange: the join fails with 'boolean Union: no result'",
|
|
LOFT_RIBS_PAD, {"body_count": 1, "volume_mm3": Vcap, "bbox": {"min": [-30, -20, 0], "max": [30, 42, 64]}, "tolerance": {"rel": 1e-4}},
|
|
"the pad (X -8..8, Y 18..25, Z 36..59) overlaps the body, ribs and ring, so the join is one connected solid. Pieces, each an interval in y at given (x, z): the neck r18 (z 0..21); "
|
|
"the ruled loft from the circle r18 to the ellipse 30 x 20 (an affine image of the circle, so each section is the ellipse of semi-axes 18 + 12 s, 18 + 2 s, s = (z-21)/17); "
|
|
"the chamber (ellipse 30 x 20, z 38..64); the ring (disc r12 about y 30, z 47, x -5..5); the two ribs (x -8..-4 and 4..8; their outline of three lines and three r1.5 corner arcs is convex); "
|
|
"the pad (y 18..25, x -8..8, z 36..59, r3 corners). V = 2 int_0^30 int_0^64 |union of the intervals| dz dx (Gauss on panels split at x 4, 5, 8, 18 and the z bounds; "
|
|
"it converges to 1e-6) = %.6f. Bbox: the chamber's ellipse (x +-30, y -20), the ring's top y 42, z 0..64" % Vcap,
|
|
source="analytic", sources=["tangency-labs/solidcraft#4092"])
|
|
|
|
# ---------------------------------------------------------------- 05 holes and taps
|
|
def H(**p):
|
|
return C("solid.hole", **p)
|
|
top = [30, 20, 20]
|
|
case(T5, "001-simple-through", "a d10 through hole in the stock's top", [H(position=top, diameter=10)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 25 * 20, "faces": 7}, "removed pi 5^2 20; + one cylinder face", base=B1)
|
|
case(T5, "002-simple-blind-flat", "a d10 blind hole 10 deep, flat bottom", [H(position=top, diameter=10, depth=10)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 25 * 10, "faces": 8}, "removed pi 5^2 10; + wall and floor", base=B1)
|
|
ch = 5 / math.tan(math.radians(59))
|
|
case(T5, "003-drilled-blind-118", "a d10 drilled hole 10 deep to the shoulder with a 118 deg point",
|
|
[H(position=top, diameter=10, depth=10, type="drilled", tip_angle=118)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 25 * 10 - PI * 25 * ch / 3, "faces": 8},
|
|
"depth to the shoulder (tests/oracle/18); point cone h = r / tan59; removed pi r^2 10 + pi r^2 h/3; + wall and cone", base=B1)
|
|
case(T5, "004-counterbore", "a counterbored hole: d6.6 through, d11 x 6.4 counterbore",
|
|
[H(position=top, diameter=6.6, type="counterbore", cb_diameter=11, cb_depth=6.4)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 3.3 ** 2 * (20 - 6.4) - PI * 5.5 ** 2 * 6.4, "faces": 9},
|
|
"removed pi 3.3^2 (20 - 6.4) + pi 5.5^2 6.4; + bore, counterbore wall, its floor annulus", base=B1)
|
|
hc = (6 - 3.3) / math.tan(math.radians(45))
|
|
case(T5, "005-countersink", "a countersunk hole: d6.6 through, d12 x 90 deg countersink",
|
|
[H(position=top, diameter=6.6, type="countersink", cs_diameter=12, cs_angle=90)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * hc / 3 * (36 + 6 * 3.3 + 3.3 ** 2) - PI * 3.3 ** 2 * (20 - hc), "faces": 8},
|
|
"countersink frustum r6 -> r3.3 over (6-3.3)/tan45 = 2.7; + bore below it; + cone and bore faces", base=B1)
|
|
case(T5, "006-tapped-m6-through", "an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread",
|
|
[H(position=top, thread="M6")],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 6.25 * 20, "faces": 7}, "M6 coarse pitch 1: tap drill 6 - 1 = 5; removed pi 2.5^2 20; the cosmetic thread adds no geometry", base=B1)
|
|
ch8 = 3.375 / math.tan(math.radians(59))
|
|
case(T5, "007-tapped-m8-blind", "an M8 tapped blind hole 12 deep with a 118 deg drill point",
|
|
[H(position=top, thread="M8", depth=12, type="drilled", tip_angle=118)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 3.375 ** 2 * 12 - PI * 3.375 ** 2 * ch8 / 3, "faces": 8},
|
|
"M8 coarse pitch 1.25: tap drill (major - pitch) 6.75; removed pi r^2 12 to the shoulder + the point cone pi r^2 (r/tan59)/3", base=B1)
|
|
r, Rc = 2.1, 20
|
|
vint = quad(lambda y: 2 * math.sqrt(max(r * r - y * y, 0)) * 2 * math.sqrt(Rc * Rc - y * y), -r, r, 128)
|
|
case(T5, "008-tapped-m5-into-curved-face", "an M5 tapped hole drilled radially through a cylinder r20 lying along X",
|
|
[cyl([0, 0, 0], 20, 60, axis="X", body_name="Part"), H(position=[30, 0, 20], thread="M5")],
|
|
{"body_count": 1, "volume_mm3": PI * 400 * 60 - vint, "faces": 4},
|
|
f"tap drill 5 - 0.8 = 4.2; the hole (axis Z) crosses the cylinder (axis X, R=20): V_int = int_-r^r 2 sqrt(r^2 - y^2) 2 sqrt(R^2 - y^2) dy = {vint:.9f}")
|
|
case(T5, "009-hole-0.5-from-edge", "a d10 through hole whose wall is 0.5 mm from the end face",
|
|
[H(position=[5.5, 20, 20], diameter=10)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 25 * 20, "faces": 7}, "removed pi 5^2 20, a 0.5 mm web left", base=B1)
|
|
case(T5, "010-hole-tangent-to-end-face", "a d10 through hole tangent to the end face x=0",
|
|
[H(position=[5, 20, 20], diameter=10)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 25 * 20}, "the wall touches x=0 along a line: removed pi 5^2 20, one body", base=B1)
|
|
case(T5, "011-crossing-holes-steinmetz", "two d10 through holes whose axes cross: vertical and along Y at z=10",
|
|
[H(position=top, diameter=10), H(position=[30, 0, 10], diameter=10)],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 25 * 20 - PI * 25 * 40 + 16 * 125 / 3, "faces": 10},
|
|
"equal radii, crossing axes: the common part is the Steinmetz solid 16 r^3 / 3; removed pi r^2 (20 + 40) - 16 r^3/3. "
|
|
"Faces: the stock's 6 and two per hole. With equal radii the walls cross along two ellipses that meet at the two "
|
|
"points where the walls are tangent (x = 25 and 35, y = 20, z = 10), so each wall is left in two pieces (the vertical "
|
|
"one above and below the other hole, the horizontal one either side of the vertical hole) that touch only at those "
|
|
"points: no edge joins them, so they are separate faces", base=B1)
|
|
rr, off = 2.5, 2.0
|
|
lo, hi = max(-rr, off - rr), min(rr, off + rr)
|
|
vx = quad(lambda u: 4 * math.sqrt(max(rr * rr - u * u, 0)) * math.sqrt(max(rr * rr - (u - off) ** 2, 0)), lo, hi, 256)
|
|
case(T5, "012-crossing-tapped-holes-offset", "two M6 tapped holes (d5) crossing with axes 2 mm apart",
|
|
[H(position=top, thread="M6"), H(position=[32, 0, 10], thread="M6")],
|
|
{"body_count": 1, "volume_mm3": VB - PI * 6.25 * 20 - PI * 6.25 * 40 + vx},
|
|
f"common part of perpendicular cylinders r=2.5 with axes 2 apart: int 2 sqrt(r^2-u^2) 2 sqrt(r^2-(u-2)^2) du = {vx:.9f}", base=B1)
|
|
V5 = V4 - PI * 6.25 * 20 - PI * 2.1 ** 2 * 8 - PI * 1.65 ** 2 * 35
|
|
case(T5, "013-part-holes", "the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base",
|
|
[H(position=[52, 22, 20], thread="M6"), H(position=[15, 15, 30], thread="M5", depth=8), H(position=[5, 35, 35], diameter=3.3)],
|
|
{"body_count": 1, "volume_mm3": V5, "faces": 20},
|
|
"removed pi 2.5^2 20 (M6, tap drill 5) + pi 2.1^2 8 (M5, tap drill 4.2, flat) + pi 1.65^2 35; faces +1 +2 +1", base=C4)
|
|
C5 = up(T5, "013-part-holes")
|
|
|
|
# ---------------------------------------------------------------- 06 threads
|
|
def thr(face, **p):
|
|
return C("solid.thread", face=face, modeled=True, **p)
|
|
def ext_volume(d, P, sections):
|
|
"""2 pi int int r m(r) over the stock's meridian section, given as [(z0, z1, rmax(z))]."""
|
|
r1, m = iso_material_fraction_ext(d, P)
|
|
def ring(rmax):
|
|
a = quad(lambda r: r, 0, min(rmax, r1)) if rmax > 0 else 0.0
|
|
b = quad(lambda r: r * m(r), r1, rmax, 64) if rmax > r1 else 0.0
|
|
return a + b
|
|
return 2 * PI * sum(quad(lambda z: ring(f(z)), z0, z1, 64) for z0, z1, f in sections)
|
|
TOL_T = {"rel": 5e-3}
|
|
TMETH = ("ISO 68-1 basic profile (60 deg, root flat P/4 at d - 5H/4 ... minor d1 = d - 1.0825 P, crest flat P/8): a helical groove of fixed section is a screw motion, "
|
|
"so averaged over the turn every meridian half-plane holds the same section and V = 2 pi int int r m(r) dr dz over the stock's section, m the material fraction per pitch; "
|
|
"the groove runs out past free ends. Tolerance 0.5%: solid.thread cuts faceted by design (chords within P/200 on the body, P/100 on the tool)")
|
|
cylT = [cyl([0, 0, 0], 5, 30, body_name="Part")]
|
|
case(T6, "001-external-m10-full", "a modelled M10 thread over the whole of a d10 x 30 cylinder", cylT + [thr([5, 0, 15], designation="M10")],
|
|
{"body_count": 1, "volume_mm3": ext_volume(10, 1.5, [(0, 30, lambda z: 5)]), "tolerance": TOL_T},
|
|
TMETH + "; P = 1.5, L = 30")
|
|
case(T6, "002-external-m10x1-fine", "a modelled fine M10x1 thread over a d10 x 30 cylinder", cylT + [thr([5, 0, 15], designation="M10x1")],
|
|
{"body_count": 1, "volume_mm3": ext_volume(10, 1.0, [(0, 30, lambda z: 5)]), "tolerance": TOL_T},
|
|
TMETH + "; P = 1, L = 30")
|
|
# A square stop inside the material takes exactly length/P turns: the groove's section is symmetric
|
|
# about its centre line, so what the sweep's last section leaves uncut ahead of the stop it cuts
|
|
# behind it, in mirror image. Its first moment does not cancel, by under 0.002 mm of the centre here.
|
|
v3 = PI * 25 * 15 + ext_volume(10, 1.5, [(15, 30, lambda z: 5)])
|
|
z3 = (PI * 25 * 15 * 7.5 + ext_volume(10, 1.5, [(15, 30, lambda z: 5)]) * 22.5) / v3
|
|
case(T6, "003-external-m10-partial-length", "a modelled M10 thread over 15 of the 30 mm from the top end (`from`): it stops square in the middle of the face",
|
|
cylT + [thr([5, 0, 15], designation="M10", length=15, **{"from": [0, 0, 30]})],
|
|
{"body_count": 1, "volume_mm3": v3, "center_of_mass": [0, 0, z3], "bbox": {"min": [-5, -5, 0], "max": [5, 5, 30]}, "tolerance": {"rel": 5e-4}},
|
|
TMETH.replace("Tolerance 0.5%: solid.thread cuts faceted by design (chords within P/200 on the body, P/100 on the tool)", "") +
|
|
"; the thread runs from the top end (z=30, out past it into the air) down to z=15, where it stops square: there the groove's section is symmetric about its centre line, "
|
|
"so the sweep's last section cuts behind the stop what it leaves ahead of it, and the stop removes exactly as if the groove ended at z=15: "
|
|
"V = pi 5^2 15 + 2 pi int_15^30 int r m(r) dr dz. The centre of mass is on the axis (ten whole turns; the stop's pieces are under 0.02 mm off it) at "
|
|
"z = (pi 25 15 x 7.5 + V_threaded x 22.5) / V; the stop's first moment, O(w^2), moves it under 0.002 mm. A pick at z=15 alone would be refused: both ends are free. "
|
|
"Tolerance 0.05%: the groove is SMLib's exact screw sweep")
|
|
shaft = [cyl([0, 0, 0], 8, 10, body_name="Part"), cyl([0, 0, 10], 5, 25, operation="join", targets=["Part"])]
|
|
# At a shoulder the groove stops with its widest part clear of it: its centre a half groove width w short
|
|
# of the shoulder, w taken at the tool's outer edge 0.05 P past the crest (the section reaches past the
|
|
# surface so the cut leaves no skin). The collar is whole.
|
|
def ext_half_width(d, P):
|
|
H = math.sqrt(3) / 2 * P
|
|
return (P / 4 + 2 * (d / 2 + 0.05 * P - (d / 2 - 5 * H / 8)) * math.tan(PI / 6)) / 2
|
|
w10 = ext_half_width(10, 1.5)
|
|
SHOULDER = ("the shaft's lower end is a shoulder (the d16 collar lies past it, in the groove's way), so the groove stops there with its widest part clear of it: "
|
|
"its centre w = (P/4 + 2 (d/2 + 0.05P - r_root) tan30)/2 = %.6f mm above the shoulder (its half width at the tool's outer edge, 0.05 P past the crest), "
|
|
"and the square stop inside material removes exactly as if the groove ended at its centre (see 003); the top end is free, the groove runs out into the air. " % w10)
|
|
vt4 = ext_volume(10, 1.5, [(10 + w10, 35, lambda z: 5)])
|
|
v4 = PI * 64 * 10 + PI * 25 * w10 + vt4
|
|
z4 = (PI * 64 * 10 * 5 + PI * 25 * w10 * (10 + w10 / 2) + vt4 * (10 + w10 + 35) / 2) / v4
|
|
case(T6, "004-external-m10-to-shoulder", "a modelled M10 thread on a d10 shaft running down to a d16 shoulder: it stops clear of it, the collar whole", shaft + [thr([5, 0, 25], designation="M10")],
|
|
{"body_count": 1, "volume_mm3": v4, "center_of_mass": [0, 0, z4], "bbox": {"min": [-8, -8, 0], "max": [8, 8, 35]}, "tolerance": {"rel": 5e-4}},
|
|
SHOULDER + "V = pi 8^2 10 (the collar) + pi 5^2 w + 2 pi int_{10+w}^35 int r m(r) dr dz (m as in 001); the centre of mass from the three parts' moments (the threaded part's at its "
|
|
"middle, the screw averaging every meridian alike; its stop moves it under 0.002 mm). Tolerance 0.05%: the groove is SMLib's exact screw sweep; a groove running a pitch into the collar "
|
|
"(the old free-end overrun) removes 0.9% more")
|
|
dI, PI_ = 10, 1.5
|
|
g = iso_groove_fraction_int(dI, PI_)
|
|
vg = 20 * 2 * PI * quad(lambda r: r * g(r), 4.25, 5)
|
|
case(T6, "005-internal-m10-through", "a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block",
|
|
[box([0, 0, 0], 30, 30, 20, body_name="Part"), H(position=[15, 15, 20], diameter=8.5), thr([19.25, 15, 10], designation="M10")],
|
|
{"body_count": 1, "volume_mm3": 18000 - PI * 4.25 ** 2 * 20 - vg, "tolerance": TOL_T},
|
|
"ISO 68-1 internal basic profile: groove P/8 wide at the major diameter, growing 2 tan30 per mm inward; the drilled hole r4.25 is above the minor r4.188, so the groove removes 2 pi int_4.25^5 r g(r) dr per mm; screw motion argument as in 001; both ends run out")
|
|
case(T6, "006-external-m10-into-chamfer", "a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer",
|
|
cylT + [C("solid.chamfer", edges=[[5, 0, 30]], distance=1), thr([5, 0, 15], designation="M10")],
|
|
{"body_count": 1, "volume_mm3": ext_volume(10, 1.5, [(0, 29, lambda z: 5), (29, 30, lambda z: 5 - (z - 29))]), "tolerance": TOL_T},
|
|
TMETH + "; the stock's section is r <= 5 below z=29 and r <= 5 - (z-29) in the chamfer; the groove runs one pitch past z=29, which covers the chamfer down to r=4.2 (above the root r=4.188 only for 0.01 mm)")
|
|
# The r1 fillet at the shoulder adds the ring of the corner square [5,6]x[10,11] less the quarter disc about
|
|
# (6, 11): 2 pi (1 x 5.5 - pi/4 (6 - 4/(3 pi))). The cylinder face then starts at z=11.
|
|
vf7 = 2 * PI * (5.5 - PI / 4 * (6 - 4 / (3 * PI)))
|
|
zf7 = 2 * PI * (5.5 * 10.5 - PI / 4 * (6 - 4 / (3 * PI)) * (11 - 4 / (3 * PI))) / vf7
|
|
vt7 = ext_volume(10, 1.5, [(11 + w10, 35, lambda z: 5)])
|
|
v7 = PI * 64 * 10 + vf7 + PI * 25 * (1 + w10) + vt7
|
|
z7 = (PI * 64 * 10 * 5 + vf7 * zf7 + PI * 25 * (1 + w10) * (10 + (1 + w10) / 2) + vt7 * (11 + w10 + 35) / 2) / v7
|
|
case(T6, "007-external-m10-at-filleted-shoulder", "a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet: it stops clear of the fillet",
|
|
shaft + [C("solid.fillet", edges=[[5, 0, 10]], radius=1), thr([5, 0, 25], designation="M10")],
|
|
{"body_count": 1, "volume_mm3": v7, "center_of_mass": [0, 0, z7], "bbox": {"min": [-8, -8, 0], "max": [8, 8, 35]}, "tolerance": {"rel": 5e-4}},
|
|
"the fillet's ring: the corner square [5,6]x[10,11] less the quarter disc about (6,11), V_f = 2 pi (5.5 - pi/4 (6 - 4/(3 pi))), its centroid z from the same moments; "
|
|
"the cylinder face starts at z=11, where the fillet meets it. " + SHOULDER.replace("lower end is a shoulder (the d16 collar", "lower end (z=11) is a shoulder (the fillet and the collar") +
|
|
"V = pi 8^2 10 + V_f + pi 5^2 (1 + w) + 2 pi int_{11+w}^35 int r m(r) dr dz. Tolerance 0.05%: SMLib's exact screw sweep")
|
|
case(T6, "008-multi-start-thread", "a two-start M10 thread (lead 3, pitch 1.5) over a d10 x 30 cylinder", cylT + [thr([5, 0, 15], designation="M10", starts=2)],
|
|
{"body_count": 1, "volume_mm3": ext_volume(10, 1.5, [(0, 30, lambda z: 5)]), "tolerance": {"rel": 1e-4}},
|
|
TMETH.replace("Tolerance 0.5%: solid.thread cuts faceted by design (chords within P/200 on the body, P/100 on the tool)", "Tolerance 0.01%: SMLib's exact screw sweep") +
|
|
"; two grooves of lead 2P, the second a half turn round from the first: every meridian half-plane holds the same sections a pitch apart as 001's one groove, "
|
|
"so the material fraction and the volume are 001's")
|
|
# The runout: the section moves out of the shaft as it turns, h = d/2 - root + 0.05 P at the shoulder
|
|
# end to 0 three mm (2 P) on; the cut per radian of turn is f(o) = int r w(r - o) dr from the moved root
|
|
# out to d/2, a cubic in the offset o until the root reaches the surface (Simpson exact).
|
|
def m10_f(o, P=1.5, d=10):
|
|
root = d / 2 - 5 * math.sqrt(3) / 16 * P
|
|
q1 = 2 * math.tan(PI / 6)
|
|
q0 = P / 4 - q1 * root - q1 * o
|
|
a = root + o
|
|
if a >= d / 2:
|
|
return 0.0
|
|
F = lambda r: q0 * r * r / 2 + q1 * r ** 3 / 3
|
|
return F(d / 2) - F(a)
|
|
P10 = 1.5
|
|
root10 = 5 - 5 * math.sqrt(3) / 16 * P10
|
|
h10 = 5 - root10 + 0.05 * P10
|
|
top10 = 5 - root10
|
|
mean10 = sum((m10_f(a) + 4 * m10_f((a + b) / 2) + m10_f(b)) * (b - a) / 6 for a, b in [(top10 * i / 64, top10 * (i + 1) / 64) for i in range(64)]) / h10
|
|
s_lo = 10 + w10
|
|
v9 = PI * 64 * 10 + PI * 25 * 25 - 2 * PI * (m10_f(0) * (35 - (s_lo + 3)) / P10 + 3 / P10 * mean10)
|
|
case(T6, "009-thread-runout-length", "004's M10 thread run from the free top end, vanishing over a 3 mm (2 P) runout before the d16 shoulder",
|
|
shaft + [thr([5, 0, 25], designation="M10", ease_out=3, **{"from": [0, 0, 35]})],
|
|
{"body_count": 1, "volume_mm3": v9, "bbox": {"min": [-8, -8, 0], "max": [8, 8, 35]}, "tolerance": {"rel": 1e-4}},
|
|
SHOULDER.replace("so the groove stops there with its widest part clear of it", "so the groove (its runout included) stops with its widest part clear of it") +
|
|
"The runout (ease_out, at the end away from `from`) moves the groove's section out of the shaft as it turns, linearly from h = d/2 - root + 0.05P at s = 10 + w to 0 at s + 3: "
|
|
"the cut per radian is f(o) = int r w(r - o) dr from root + o to 5 (w the section's width at its own radius), the runout removes 2 pi (3/P) mean(f) (Simpson, exact on the cubic), "
|
|
"the full-depth groove from s + 3 to the free top end 2 pi f(0) (35 - s - 3)/P (the overrun past the free end as in 001). "
|
|
"V = pi 8^2 10 + pi 5^2 25 - both. Tolerance 0.01%: SMLib's exact radial screw sweep")
|
|
def groove(d, P, sections):
|
|
"""What a modelled external groove removes over the stock's meridian section [(z0, z1, rmax(z))]."""
|
|
return sum(PI * quad(lambda z: f(z) ** 2, z0, z1, 64) for z0, z1, f in sections) - ext_volume(d, P, sections)
|
|
w16 = ext_half_width(16, 2)
|
|
case(T6, "010-part-threaded-boss", "the running part with a modelled M16 thread on its d16 boss",
|
|
[thr([23, 15, 25], designation="M16")],
|
|
{"body_count": 1, "volume_mm3": V5 - groove(16, 2, [(20 + w16, 30, lambda z: 8)]), "bbox": {"min": [0, 0, 0], "max": [60, 40, 35]}, "tolerance": {"rel": 1e-4}},
|
|
"the boss (r8, z 20..30) stands on the base's top face, a shoulder: the groove stops with its centre w = %.6f above it (004's rule, M16 P = 2) and runs out past the free top end; "
|
|
"its root r = 8 - 5H/8 = 6.917 stays clear of the M5 tap drill (r 2.1) in the boss. V = the tier-05 part - (pi 8^2 (30 - 20 - w) - 2 pi int_{20+w}^30 int r m(r) dr dz), m as in 001; "
|
|
"the bbox is the part's. Later tiers build on the part before this step and 11-cumulative-parts adds the thread last" % w16, base=C5)
|
|
|
|
# The other standard forms (crates/doc/src/thread_forms.rs, docs/threads.md): a groove of a fixed
|
|
# straight-flanked section, its tooth `flat` wide at the crest radius and widening by tan a + tan b
|
|
# per unit of depth, removes 2 pi int r w(r) dr per turn (Pappus, the screw motion).
|
|
def form_turn(P, flat, crest, a, b, r0, r1, internal=False):
|
|
t = math.tan(math.radians(a)) + math.tan(math.radians(b))
|
|
w = lambda r: P - flat - ((r - crest) if internal else (crest - r)) * t
|
|
return 2 * PI * quad(lambda r: r * w(r), r0, r1, 16)
|
|
INCH = 25.4
|
|
TOL_F = {"rel": 1e-4}
|
|
FMETH = ("groove volume per turn 2 pi int r w(r) dr over the material it cuts (Pappus on the axial section; a screw motion), w(r) = P - flat - depth (tan a + tan b); "
|
|
"six whole turns between free ends, so V = stock - 6 x that. Tolerance 0.01%: SMLib's exact screw sweep. ")
|
|
def shaft_form(name, what, form, desig, d, P, flat, a, b, r3, extra="", **p):
|
|
L = 6 * P
|
|
v = PI * (d / 2) ** 2 * L - 6 * form_turn(P, flat, d / 2, a, b, r3, d / 2)
|
|
case(T6, name, what, [cyl([0, 0, 0], d / 2, L, body_name="Part"), thr([d / 2, 0, L / 2], form=form, designation=desig, **p)],
|
|
{"body_count": 1, "volume_mm3": v, "tolerance": TOL_F}, FMETH + extra)
|
|
t15, t145 = math.tan(math.radians(15)), math.tan(math.radians(14.5))
|
|
shaft_form("011-external-tr20x4", "a modelled trapezoidal Tr20x4 thread (ISO 2904) on a d20 shaft, six turns", "trapezoidal", "Tr20x4", 20, 4,
|
|
2 * (1 - t15), 15, 15, 10 - 2 - 0.25,
|
|
"ISO 2904: 30 deg, H1 = P/2, crest flat P/2 (1 - tan15) = 0.366 P, external minor d3 = d - 2 (H1 + ac) = 15.5 (ac = 0.25 for P 2..5)")
|
|
shaft_form("012-external-acme-3-4-6", "a modelled 3/4-6 ACME thread (ASME B1.5, general purpose) on a 3/4 in shaft, six turns", "acme", "3/4-6 ACME", 0.75 * INCH, INCH / 6,
|
|
INCH / 12 * (1 - t145), 14.5, 14.5, 0.375 * INCH - INCH / 12 - 0.010 * INCH,
|
|
"ASME B1.5: 29 deg, h = P/2, crest flat 0.3707 P, external minor d - P - 0.020 in (10 threads per inch or coarser)")
|
|
t3 = math.tan(math.radians(3)) + math.tan(math.radians(30))
|
|
shaft_form("013-external-s20x4", "a modelled metric buttress S20x4 thread (DIN 513, 3/30 deg) on a d20 shaft, six turns", "buttress", "S20x4", 20, 4,
|
|
(4 - 3 * t3) / 2, 3, 30, 10 - 0.86777 * 4,
|
|
"DIN 513-1: 3 deg load flank, 30 deg clearance flank, H1 = 0.75 P, flats (P - 0.75 P (tan3 + tan30))/2 = 0.26384 P, external minor d3 = d - 2 x 0.86777 P = 13.058 (IS 4696-3 table)")
|
|
t7 = math.tan(math.radians(7)) + 1
|
|
P8 = INCH / 8
|
|
shaft_form("014-external-buttress-asme-1.5-8", "a modelled 1.5-8 buttress thread (ASME B1.9 basic profile, 7/45 deg) on a 1.5 in shaft, six turns", "buttress_asme", "1.5-8 BUTT",
|
|
1.5 * INCH, P8, (P8 - 0.6 * P8 * t7) / 2, 7, 45, 0.75 * INCH - 0.6 * P8,
|
|
"ASME B1.9 basic profile: 7 deg load flank, 45 deg clearance flank, h = 0.6 P, flats (P - 0.6 P (tan7 + tan45))/2 = 0.16316 P; the root radius and allowances are not modelled")
|
|
dT, PT = 20, 4
|
|
vnut = 6 * form_turn(PT, 2 * (1 - t15), (dT - PT) / 2, 15, 15, (dT - PT) / 2, dT / 2 + 0.25, internal=True)
|
|
case(T6, "015-internal-tr20x4-nut", "a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block",
|
|
[box([-20, -20, 0], 40, 40, 24, body_name="Part"), cyl([0, 0, -1], 8, 26, body_name="Bore"), C("solid.combine", target="Part", tools=["Bore"], operation="cut"),
|
|
thr([8, 0, 12], designation="Tr20x4")],
|
|
{"body_count": 1, "volume_mm3": 40 * 40 * 24 - PI * 64 * 24 - vnut, "tolerance": TOL_F},
|
|
FMETH.replace("between free ends", "through the block, both ends free") + "ISO 2904 internal: the nut's crest flat 0.366 P at D1 = d - P = 16, its root at D4 = d + 2 ac = 20.5; "
|
|
"the groove from the bore wall r 8 out to r 10.25, w(r) = P - 0.366 P - (r - 8) 2 tan15")
|
|
case(T6, "016-external-m10-left-hand", "001's modelled M10 thread, left-handed: the same volume, turning the other way", cylT + [thr([5, 0, 15], designation="M10", hand="left")],
|
|
{"body_count": 1, "volume_mm3": ext_volume(10, 1.5, [(0, 30, lambda z: 5)]), "tolerance": {"rel": 1e-4}},
|
|
TMETH.replace("Tolerance 0.5%: solid.thread cuts faceted by design (chords within P/200 on the body, P/100 on the tool)", "Tolerance 0.01%: SMLib's exact screw sweep") +
|
|
"; a mirror image of 001's groove, so the same volume")
|
|
|
|
# Both hands: two grooves of the same section crossing. At radius r, along every line parallel to the axis the
|
|
# right-hand groove takes a fraction g(r) = 1 - m(r) of each pitch and the left-hand one the same, their phases
|
|
# drifting apart by two pitches a turn: over the turn the overlap averages g^2 (the side vectors of the (theta, z)
|
|
# domain, (L, L) and (-P, P) in the two grooves' phases, are periods, L = 20 P), so the material left is m^2.
|
|
r1b, mb = iso_material_fraction_ext(10, 1.5)
|
|
vboth = 2 * PI * 30 * (quad(lambda r: r, 0, r1b) + quad(lambda r: r * mb(r) ** 2, r1b, 5, 64))
|
|
case(T6, "018-external-m10-both-hands", "001's modelled M10 thread cut both ways: a right- and a left-handed groove crossing on a d10 x 30 cylinder",
|
|
cylT + [thr([5, 0, 15], designation="M10", hand="both")],
|
|
{"body_count": 1, "volume_mm3": vboth, "tolerance": {"rel": 1e-4}},
|
|
"each groove alone leaves 001's material fraction m(r) (ISO 68-1 basic profile; 016 is the left hand alone). Along a line parallel to the axis at radius r each groove takes the "
|
|
"fraction g = 1 - m of every pitch, the two phases drifting apart by two pitches a turn; over a turn the overlap of the two takes g^2 (exact here: in the two grooves' phases the "
|
|
"(theta, z) domain is spanned by (L, L) and (-P, P), both periods, L = 20 P), so the material left is 1 - 2g + g^2 = m^2: V = 2 pi L int_0^5 r m(r)^2 dr "
|
|
"(= stock - 2 x groove + crossing). Both grooves run out past the free ends. No bbox: the crest survives only in diamonds, two windows of 45 deg a turn where the two crests meet, "
|
|
"so how far the part reaches along x and y depends on where the grooves' phases line up round the axis. Tolerance 0.01%: SMLib's exact screw sweeps")
|
|
P7, d40 = 7, 40
|
|
case(T6, "019-external-tr40x14-p7-two-start", "a modelled two-start trapezoidal Tr40x14(P7) thread (ISO 2904, ISO 2903) on a d40 shaft, three leads long",
|
|
[cyl([0, 0, 0], d40 / 2, 6 * P7, body_name="Part"), thr([d40 / 2, 0, 3 * P7], designation="Tr40x14(P7)")],
|
|
{"body_count": 1, "volume_mm3": PI * 400 * 6 * P7 - 6 * form_turn(P7, P7 / 2 * (1 - t15), 20, 15, 15, 20 - P7 / 2 - 0.5, 20),
|
|
"bbox": {"min": [-20, -20, 0], "max": [20, 20, 42]}, "tolerance": TOL_F},
|
|
FMETH.replace("six whole turns between free ends", "two grooves of lead 14 a half turn apart, so every meridian half-plane holds a groove section every pitch 7, as one "
|
|
"groove of pitch 7 would: over 42 mm (three leads, six pitches) between free ends") + "ISO 2904 for P 7: 30 deg, H1 = P/2, crest flat 0.366 P, "
|
|
"ac = 0.5 (P 6..12), external minor d3 = d - 2 (H1 + ac) = 32")
|
|
|
|
rf10 = 5 - 5 * math.sqrt(3) / 2 * 1.5 / 8
|
|
case(T6, "017-external-m10-chamfered-tip", "001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the minor diameter, cut after the groove",
|
|
cylT + [thr([5, 0, 15], designation="M10", tip="chamfer")],
|
|
{"body_count": 1, "volume_mm3": ext_volume(10, 1.5, [(0, 5 - rf10, lambda z: rf10 + z), (5 - rf10, 25 + rf10, lambda z: 5), (25 + rf10, 30, lambda z: rf10 + 30 - z)]),
|
|
"tolerance": {"rel": 1e-4}},
|
|
TMETH.replace("Tolerance 0.5%: solid.thread cuts faceted by design (chords within P/200 on the body, P/100 on the tool)", "Tolerance 0.01%: SMLib's exact screw sweep") +
|
|
"; the chamfer is axisymmetric and cut after the groove, so it only lowers the stock's outer radius: r <= d_f/2 + distance from the end (45 deg), d_f the minor diameter d - 5H/4 = 8.376 "
|
|
"(ISO 4753 chamfered end: the end's diameter at most the minor diameter)")
|
|
|
|
# ---------------------------------------------------------------- 07 fillets
|
|
F = lambda edges, r, **p: C("solid.fillet", edges=edges, radius=r, **p)
|
|
case(T7, "001-single-edge-r5", "an r5 round on the stock's top front edge", [F([[30, 0, 20]], 5)],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 25 * 60, "faces": 7}, "removed (1 - pi/4) r^2 L", base=B1)
|
|
V72 = VB - 4 * SPANDREL * 25 * 20
|
|
case(T7, "002-four-vertical-edges-r5", "r5 rounds on the four vertical edges", [F([[0, 0, 10], [60, 0, 10], [60, 40, 10], [0, 40, 10]], 5)],
|
|
{"body_count": 1, "volume_mm3": V72, "faces": 10}, "removed 4 (1 - pi/4) r^2 20", base=B1)
|
|
c = 5 - 5 / math.sqrt(2)
|
|
case(T7, "003-tangent-chain-r3", "an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs",
|
|
[F([[30, 0, 20], [60, 20, 20], [30, 40, 20], [0, 20, 20], [c, c, 20], [60 - c, c, 20], [60 - c, 40 - c, 20], [c, 40 - c, 20]], 3)],
|
|
{"body_count": 1, "volume_mm3": V72 - SPANDREL * 9 * 160 - SPANDREL * 9 * 2 * PI * (5 - XBAR * 3), "faces": 18},
|
|
"straight runs 2*50 + 2*30 = 160 remove (1-pi/4) r^2 each mm; at each corner the round is a torus quarter: Pappus, the section (1-pi/4) r^2 with its centroid r(10-3pi)/(12-3pi) in from the wall, at radius 5 - that, over a quarter turn",
|
|
base=up(T7, "002-four-vertical-edges-r5"))
|
|
case(T7, "004-convex-and-concave-r5", "an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one",
|
|
sketch("XY", line([[0, 0], [40, 0], [40, 10], [10, 10], [10, 40], [0, 40]], closed=True)) + [C("solid.extrude", distance=20), F([[10, 10, 10], [0, 0, 10]], 5)],
|
|
{"body_count": 1, "volume_mm3": 700 * 20, "faces": 10},
|
|
"the concave round adds (1-pi/4) r^2 20, the convex one removes the same: V = 700*20")
|
|
case(T7, "005-variable-r5-to-r1", "a variable round on the top front edge, r5 at x=0 to r1 at x=60",
|
|
[F([[30, 0, 20]], 5, type="variable", radius2=1, start=[0, 0, 20])],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 60 * (25 + 5 + 1) / 3, "faces": 7},
|
|
"linear radius, quarter-round sections (tests/oracle/77): V = abc - (1-pi/4) L (a^2 + ab + b^2)/3", base=B1)
|
|
case(T7, "006-variable-r5-to-zero", "a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex",
|
|
[F([[30, 0, 20]], 5, type="variable", radius2=0, start=[0, 0, 20])],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 60 * 25 / 3, "faces": 7},
|
|
"as 005 with b=0 (tests/oracle/78): the round closes to the corner, which stays", base=B1)
|
|
case(T7, "007-variable-r5-to-1e-3", "a variable round on the top front edge, r5 down to 1e-3 mm",
|
|
[F([[30, 0, 20]], 5, type="variable", radius2=0.001, start=[0, 0, 20])],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 60 * (25 + 5e-3 + 1e-6) / 3, "faces": 7},
|
|
"as 005 with b = 1e-3: the round's end is a 1e-3 mm quarter circle on the end face", base=B1)
|
|
case(T7, "008-constant-r1e-3", "a constant 1e-3 mm round on the top front edge",
|
|
[F([[30, 0, 20]], 0.001)],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 1e-6 * 60, "faces": 7}, "removed (1-pi/4) 1e-6 60, a valid 1e-3 round face", base=B1)
|
|
corner = [[30, 40, 20], [60, 20, 20], [60, 40, 10]]
|
|
case(T7, "009-corner-three-equal-r5", "r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner",
|
|
[F(corner, 5)],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 25 * (60 + 40 + 20 - 15) - 125 * (1 - PI / 6), "faces": 10},
|
|
"each edge zone outside the corner cube removes (1-pi/4) r^2 (L - r); the corner cube r^3 keeps a sphere octant pi r^3/6", base=B1)
|
|
case(T7, "010-corner-unequal-r7-r3", "an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge",
|
|
[F([corner[2]], 7), F([[60, 15, 20]], 3)],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 49 * 20 - SPANDREL * 9 * (33 + 53) - SPANDREL * 9 * (PI / 2) * (7 - XBAR * 3),
|
|
"faces": 10, "edges": 22, "vertices": 14, "bbox": BBOX, "tolerance": {"rel": 1e-5}},
|
|
"the r7 vertical round removes (1-pi/4) 7^2 20; the r3 chain runs along x = 60 (y 0..33) and y = 40 (x 0..53), straight, removing (1-pi/4) 3^2 each mm, and round the "
|
|
"r7 arc's top edge as a torus quarter: Pappus, the section (1-pi/4) 3^2 with its centroid 3 (10-3pi)/(12-3pi) in from the wall, at radius 7 - that, over pi/2 (as 003). "
|
|
"Faces: 6 planes + the r7 cylinder + the r3 chain's cylinder, torus, cylinder; edges: 5 round the bottom, 5 round the top, 5 vertical (two r7 tangent lines, the box's "
|
|
"three other verticals), the chain's three on the walls and two end arcs, its two seams; vertices from Euler (V - E + F = 2): 14", base=B1)
|
|
case(T7, "016-corner-three-sequential-r5-r3-r7", 'rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them: refused, the r7 cannot exist',
|
|
[F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 7)], {"outcome": "refused"},
|
|
"the r7 runs on (tangent chain) up the side x=60 along its arc on the r5 round, a circle of radius 5 about the r5 axis: the r7's contact line on that face would be the arc offset 7 towards its centre, radius 5 - 7 < 0, so the blend passes through itself; and along the seam of the r5 and r3 rounds no ball over r3 fits the r3 round. No such round exists, so the right answer is a clean refusal (SMLib: no room for the rolling ball). 018 is the same corner with a radius that fits.", base=B1, source="invariants")
|
|
case(T7, "018-corner-three-sequential-r5-r3-r2", 'rounds r5 and r3 on the two top edges at a corner, then r2 on the vertical edge under them, run on up into the corner',
|
|
[F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 2)], {"body_count": 1, "faces": 11, "bbox": BBOX},
|
|
"as 016 with a radius that fits (r < 3, the smaller top round): the r2 runs up the vertical edge and on along the side's arc on the r5 round and the seam between the two rounds, tapering to a point where they become tangent. Faces: the box's 6 and the two top rounds, + 3 for the r2 (along the vertical edge, up the arc, along the seam); one valid body inside the box", base=B1, source="invariants")
|
|
case(T7, "011-chain-ending-at-corner", "r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp",
|
|
[F([corner[0], corner[1]], 5)],
|
|
{"body_count": 1, "volume_mm3": VB - SPANDREL * 25 * 100 + 125 * (5 / 3 - PI / 2), "faces": 8, "edges": 17, "vertices": 11, "bbox": BBOX, "tolerance": {"rel": 1e-5}},
|
|
"the two rounds remove (1-pi/4) 5^2 (60 + 40), less their common part in the corner cube, counted twice: in it (u, v, w from the round axes' corner) both remove where "
|
|
"u, v > sqrt(25 - w^2), int_0^5 (5 - sqrt(25 - w^2))^2 dw = 5^3 (5/3 - pi/2). They meet in a mitre (an elliptic arc down to the sharp vertical edge). Faces 6 + 2; edges: "
|
|
"4 bottom, 4 vertical, 4 round the top face, 2 round-wall tangent lines, 2 end arcs, the mitre; vertices 11 (Euler)", base=B1)
|
|
# 012: the variable round's end carried on past x = 55 into the vertical round's column, trimmed by it.
|
|
def corner_extension(rf, n=400):
|
|
tot = 0.0
|
|
for i in range(n):
|
|
x = 55 + 5 * (i + 0.5) / n
|
|
vmax = math.sqrt(max(25 - (x - 55) ** 2, 0))
|
|
r = rf(x)
|
|
c = 5 - r
|
|
def above(v):
|
|
dv = v - c
|
|
return max(0.0, 5 - (c + math.sqrt(max(r * r - dv * dv, 0)))) if dv < r else 5 - c
|
|
tot += quad_split(above, c, vmax, 40, 16) * 5 / n if vmax > c else 0.0
|
|
return tot
|
|
ext_const = 125 * PI / 4 - 250 / 3
|
|
ext_grow = corner_extension(lambda x: 1 + 4 * x / 55)
|
|
v12a = VB - SPANDREL * 25 * 20 - SPANDREL * 55 * 31 / 3
|
|
v12lo, v12hi = v12a - ext_grow, v12a - ext_const
|
|
case(T7, "012-variable-into-rounded-corner", "a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it",
|
|
[F([corner[2]], 5), F([[30, 40, 20]], 1, type="variable", radius2=5, start=[0, 40, 20])],
|
|
{"body_count": 1, "volume_mm3": (v12lo + v12hi) / 2, "faces": 8, "edges": 18, "vertices": 12, "bbox": BBOX, "tolerance": {"rel": (v12hi - v12lo) / (v12hi + v12lo) + 1e-6}},
|
|
"a variable round takes only its picked edge (no tangent chain: crates/doc/src/eval.rs), y = 40 from x = 0 (r1) to x = 55 (r5), where it meets the vertical r5 round's "
|
|
"tangent line: removed (1-pi/4) 55 (1 + 5 + 25)/3 (005) and (1-pi/4) 5^2 20. Past x = 55 the round's end runs on into the vertical round's quarter column, trimmed by its "
|
|
"cylinder: as a constant r5 tube that takes int_0^5 sqrt(25 - v^2)(5 - sqrt(25 - v^2)) dv = 125 pi/4 - 250/3 = %.6f; with its radius still growing at 4/55 per mm, %.6f "
|
|
"(numerical, the round's section against the cylinder). V lies between: graded as the interval's middle with its half width as the tolerance. Faces 6 + 2; edges 18, "
|
|
"vertices 12 (5 round the bottom, 5 vertical, 5 round the top face, the round's line on the back wall, its end arc on x = 0, its trim on the cylinder)" % (ext_const, ext_grow), base=B1)
|
|
# 013: convex, so in the corner cube C (side 8) it lies between the hull of its sections on C's faces and the rounds' prisms.
|
|
v13out = VB - SPANDREL * 25 * (60 + 40 + 20 - 15) - 125 * (1 - PI / 6) - (512 - 225 * SPANDREL - 125 * (1 - PI / 6))
|
|
v13lo, v13hi = v13out + 299.0201, v13out + 512 - 225 * SPANDREL - 125 * (math.sqrt(2) - 1)
|
|
case(T7, "013-corner-setback", 'three r5 rounds at the corner (60,40,20) with setbacks of 8 mm along each edge',
|
|
[F(corner, 5, setbacks=[{"vertex": [60, 40, 20], "distance": 8}])],
|
|
{"body_count": 1, "volume_mm3": (v13lo + v13hi) / 2, "faces": 15, "edges": 36, "vertices": 23, "bbox": BBOX,
|
|
"tolerance": {"rel": (v13hi - v13lo) / (v13hi + v13lo) + 1e-6}},
|
|
"outside the corner cube C = [52,60]x[32,40]x[12,20] the body is the sphere corner's (009: V0 = 47377.120025868, of which 512 - 225 (1-pi/4) - 125 (1-pi/6) lies in C); the body is convex, so in C it holds the hull of its points on C's faces (the rounds' sections at the setback planes x=52, y=32, z=12 and the cube's corners outside the patch: 299.0201 by a hull of the sections sampled, below the true hull) and lies within the planes tangent to it along those sections, the three rounds' prisms (512 - 225 (1-pi/4) - 125 (sqrt2-1): the corner cube of r keeps the cylinders' common octant (2-sqrt2) r^3). The volume is the middle of [47271.9757, 47384.8935] with that half width as its tolerance. The box is unchanged. SMLib's setback patch is two quadrilaterals per side meeting at its centre: 6 box faces, 3 rounds, 6 patch pieces; vertices: 4 untouched box corners, 2 at each round's far end, the 6 section ends (where the patch starts, 8 from the vertex along each edge), the 6 side middles and the centre (23); edges by Euler, 23 + 15 - 2", base=B1, source="invariants")
|
|
case(T7, "014-curved-edge-r2", "an r2 round on the top edge of a cylinder r10 h20",
|
|
[cyl([0, 0, 0], 10, 20, body_name="Part"), F([[10, 0, 20]], 2)],
|
|
{"body_count": 1, "volume_mm3": PI * 100 * 20 - SPANDREL * 4 * 2 * PI * (10 - XBAR * 2), "faces": 4},
|
|
"a torus round: Pappus on the removed section (1-pi/4) r^2 at radius 10 - r(10-3pi)/(12-3pi)")
|
|
case(T7, "015-corner-g2-patch", "three r5 rounds at a corner with the g2 corner patch",
|
|
[F(corner, 5, corner="g2")],
|
|
{"body_count": 1, "faces": 10, "bbox": {"min": [0, 0, 0], "max": [60, 40, 20]},
|
|
"continuity": {"near": [60, 40, 20], "within_mm": 15, "clear_mm": 1.2, "curvature_jump_per_mm": 0.001}},
|
|
"the corner set back 1.5 r = 7.5 and filled with one patch G2 to the three rounds and the three faces; no closed-form volume; "
|
|
"one valid body, the same faces as 009, within the box; across the patch's seams the curvature jump is at most 1e-3 per mm "
|
|
"(the ball's corner, 009, jumps 1/r = 0.2) clear of the six points where a round's section ends on a face, where the round's "
|
|
"own G1 seam with the face ends (the patch passes from one curvature to the other within 15% of each side: 1.2 mm covers it)",
|
|
base=B1, source="invariants")
|
|
notch = [[50, 20, 10], [40, 30, 10], [40, 20, 15]]
|
|
case(T7, "019-concave-corner-g2-patch", "three concave r5 rounds at the inner corner of a 20x20x10 notch, with the g2 corner patch",
|
|
[box([40, 20, 10], 30, 30, 20, body_name="Notch"), C("solid.combine", target="Part", tools=["Notch"], operation="cut"),
|
|
F(notch, 5, corner="g2")],
|
|
{"body_count": 1, "faces": 13, "bbox": {"min": [0, 0, 0], "max": [60, 40, 20]},
|
|
"continuity": {"near": [40, 20, 10], "within_mm": 11, "clear_mm": 1.2, "curvature_jump_per_mm": 0.001}},
|
|
"the notch's inner corner (40,20,10), three concave edges, set back 1.5 r = 7.5 and filled with one patch G2 to the three "
|
|
"rounds and the three faces; one valid body with the faces of the ball corner (13); across the patch's seams the curvature "
|
|
"jump is at most 1e-3 per mm (the ball's corner jumps 1/r = 0.2) clear of the six points where a round's section ends on a face (within 11 mm of the corner: the hole reaches 7.5 sqrt 2; "
|
|
"the vertical round, 2.5 mm long past its setback, meets its faces 11.2 mm out, with the G1 jump every round has)",
|
|
base=B1, source="invariants")
|
|
V7 = V5 - 2 * SPANDREL * 25 * 20 - SPANDREL * 9 * 60 + SPANDREL * 1 * 2 * PI * (8 + XBAR * 1)
|
|
case(T7, "017-part-rounds", "the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top",
|
|
[F([[0, 0, 10], [60, 0, 10]], 5), F([[30, 30, 35]], 3), F([[23, 15, 20]], 1)],
|
|
{"body_count": 1, "volume_mm3": V7, "faces": 24},
|
|
"removed 2 (1-pi/4) 25 20 + (1-pi/4) 9 60; the concave r1 at the boss adds (1-pi/4) 1 2 pi (8 + (10-3pi)/(12-3pi)); none of them reaches a hole, the slot or the window", base=C5)
|
|
C7 = up(T7, "017-part-rounds")
|
|
|
|
# ---------------------------------------------------------------- 08 chamfers
|
|
K = lambda edges, d, **p: C("solid.chamfer", edges=edges, distance=d, **p)
|
|
case(T8, "001-equal-5", "a 5 mm chamfer on the top front edge", [K([[30, 0, 20]], 5)],
|
|
{"body_count": 1, "volume_mm3": VB - 12.5 * 60, "faces": 7}, "removed d^2/2 L", base=B1)
|
|
case(T8, "002-two-distances-5-3", "a 5 x 3 chamfer on the top front edge", [K([[30, 0, 20]], 5, distance2=3)],
|
|
{"body_count": 1, "volume_mm3": VB - 7.5 * 60, "faces": 7}, "removed d1 d2 / 2 L", base=B1)
|
|
case(T8, "003-distance-angle-5-30", "a chamfer 5 mm at 30 deg on the top front edge", [K([[30, 0, 20]], 5, angle=30)],
|
|
{"body_count": 1, "volume_mm3": VB - 0.5 * 5 * 5 * math.tan(math.radians(30)) * 60, "faces": 7}, "legs 5 and 5 tan30: removed 5 * 5 tan30 / 2 * 60", base=B1)
|
|
d = 3
|
|
case(T8, "004-corner-three-equal-3", "3 mm chamfers on the three edges meeting at a corner",
|
|
[K(corner, 3)],
|
|
{"body_count": 1, "volume_mm3": VB - (d * d / 2 * 120 - d ** 3 + d ** 3 / 4), "faces": 9},
|
|
"the union of the three prisms {b+c<=d}, {a+c<=d}, {a+b<=d} (a, b, c distances from the corner faces): sum d^2/2 L - 3 d^3/3 + the triple part d^3/4 (exact integral)", base=B1)
|
|
case(T8, "005-corner-two-mitred-3", "3 mm chamfers on two top edges meeting at a corner (mitred)",
|
|
[K(corner[:2], 3)],
|
|
{"body_count": 1, "volume_mm3": VB - (d * d / 2 * 100 - d ** 3 / 3), "faces": 8},
|
|
"two prisms meeting in a mitre: d^2/2 (60 + 40) - d^3/3", base=B1)
|
|
case(T8, "006-curved-edge-2", "a 2 mm chamfer on the top edge of a cylinder r10 h20",
|
|
[cyl([0, 0, 0], 10, 20, body_name="Part"), K([[10, 0, 20]], 2)],
|
|
{"body_count": 1, "volume_mm3": PI * 100 * 20 - 2 * 2 * PI * (10 - 2 / 3), "faces": 4},
|
|
"a cone chamfer: Pappus on the triangle (area 2) with its centroid at radius 10 - 2/3")
|
|
case(T8, "007-chamfer-then-fillets", "a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it",
|
|
[K([[30, 0, 20]], 3), F([[0, 0, 5], [60, 0, 5]], 2)],
|
|
{"body_count": 1, "volume_mm3": VB - 4.5 * 60 - 2 * SPANDREL * 4 * 17 - 2 * SPANDREL * 4 * 2 * XBAR, "faces": 9, "edges": 21, "vertices": 14, "bbox": BBOX, "tolerance": {"rel": 1e-5}},
|
|
"the chamfer removes 3^2/2 60. The front vertical edges then run z 0..17; each r2 round removes (1-pi/4) 2^2 17 below and runs on up into the chamfer face z = 17 + y: "
|
|
"over its section it removes a column y high, int y dA = (1-pi/4) 2^2 x 2 (10-3pi)/(12-3pi) (the section's centroid). Faces 6 + chamfer + 2 rounds; vertices: 6 round the bottom, "
|
|
"4 of the top face, the front face's 2 top corners, the 2 tops of the rounds' tangent lines on the ends (z = 19): 14; edges 21 (Euler)", base=B1)
|
|
V8 = V7 - 0.5 * 2 * PI * (8 - 1 / 3) - 2 * 60
|
|
case(T8, "008-part-chamfers", "the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge",
|
|
[K([[23, 15, 30]], 1), K([[30, 40, 35]], 2)],
|
|
{"body_count": 1, "volume_mm3": V8, "faces": 26},
|
|
"removed 0.5 * 2 pi (8 - 1/3) (Pappus) + 2 * 60", base=C7)
|
|
C8 = up(T8, "008-part-chamfers")
|
|
|
|
# ---------------------------------------------------------------- 09 shells and offsets
|
|
S = lambda faces, t, **p: C("solid.shell", faces=faces, thickness=t, **p)
|
|
case(T9, "001-box-open-top-t2", "the stock shelled 2 mm, open at the top", [S([[30, 20, 20]], 2)],
|
|
{"body_count": 1, "volume_mm3": VB - 56 * 36 * 18, "faces": 11}, "cavity 56x36x18; faces 5 outer + rim + 5 inner", base=B1)
|
|
case(T9, "002-cylinder-open-top-t1", "a cylinder r10 h30 shelled 1 mm, open at the top",
|
|
[cyl([0, 0, 0], 10, 30, body_name="Part"), S([[0, 0, 30]], 1)],
|
|
{"body_count": 1, "volume_mm3": PI * 100 * 30 - PI * 81 * 29, "faces": 5}, "cavity r9 x 29")
|
|
case(T9, "003-tube-two-open-faces", "the stock shelled 2 mm, open top and bottom", [S([[30, 20, 20], [30, 20, 0]], 2)],
|
|
{"body_count": 1, "volume_mm3": 20 * (2400 - 56 * 36), "faces": 10}, "a rectangular tube: 20 (60*40 - 56*36)", base=B1)
|
|
case(T9, "004-thin-wall-0.2", "the stock shelled 0.2 mm, open at the top", [S([[30, 20, 20]], 0.2)],
|
|
{"body_count": 1, "volume_mm3": VB - 59.6 * 39.6 * 19.8, "faces": 11}, "cavity 59.6 x 39.6 x 19.8", base=B1)
|
|
case(T9, "005-shell-rounds-r5-t2", "the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3",
|
|
[S([[30, 20, 20]], 2)],
|
|
{"body_count": 1, "volume_mm3": V72 - 18 * (56 * 36 - 4 * SPANDREL * 9), "faces": 19},
|
|
"the cavity is the 56x36 rounded rectangle with r 5-2 = 3 corners, 18 deep", base=up(T7, "002-four-vertical-edges-r5"))
|
|
case(T9, "006-shell-rounds-r1-thinner-than-t2", "the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp",
|
|
[F([[0, 0, 10], [60, 0, 10], [60, 40, 10], [0, 40, 10]], 1), S([[30, 20, 20]], 2)],
|
|
{"body_count": 1, "volume_mm3": 20 * (2400 - 4 * SPANDREL) - 18 * 56 * 36, "faces": 15},
|
|
"an inward offset of r1 by 2 vanishes: the cavity is a sharp 56x36x18 box", base=B1)
|
|
case(T9, "007-offset-top-face-5", "the stock's top face offset 5 mm", [C("solid.offset_face", faces=[[30, 20, 20]], distance=5)],
|
|
{"body_count": 1, "volume_mm3": 60 * 40 * 25, "faces": 6}, "a 60x40x25 box", base=B1)
|
|
case(T9, "008-offset-cylinder-wall-2", "a cylinder r10 h20 with its side face offset 2 mm",
|
|
[cyl([0, 0, 0], 10, 20, body_name="Part"), C("solid.offset_face", faces=[[10, 0, 10]], distance=2)],
|
|
{"body_count": 1, "volume_mm3": PI * 144 * 20, "faces": 3}, "a cylinder r12 h20")
|
|
case(T9, "009-shell-outside-t2", "the stock shelled 2 mm outward, open at the top", [S([[30, 20, 20]], 2, direction="outside")],
|
|
{"body_count": 1, "volume_mm3": 64 * 44 * 22 - VB, "faces": 11}, "walls grown out of the closed faces: 64 x 44 x 22 less the original box", base=B1)
|
|
MITRE = 5 / 3 - PI / 2 # two equal rounds' common part at a mitred corner, per r^3 (07/011)
|
|
case(T9, "010-shell-under-rounded-top", "the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom",
|
|
[F([[30, 0, 20], [60, 20, 20], [30, 40, 20], [0, 20, 20]], 3), S([[30, 20, 0]], 2)],
|
|
{"body_count": 1, "volume_mm3": (VB - SPANDREL * 9 * 200 + 4 * 27 * MITRE) - (56 * 36 * 18 - SPANDREL * 1 * 184 + 4 * 1 * MITRE),
|
|
"faces": 19, "edges": 40, "vertices": 24, "bbox": BBOX, "tolerance": {"rel": 1e-5}},
|
|
"the vertical edges stay sharp, so each pair of top rounds meets in a mitre at a corner (08/011's identity): outside, (1-pi/4) 3^2 (2 60 + 2 40) removed, "
|
|
"less 4 x 3^3 (5/3 - pi/2) counted twice; the cavity is the 56 x 36 x 18 box (open at z = 0) with its top edges rounded 3 - 2 = 1, mitred alike. V = outside - cavity. "
|
|
"Faces: 9 outside (bottom ring aside: top, 4 sides, 4 rounds), 9 inside, the bottom ring; vertices: 8 at the mitres' ends outside, 8 inside, 8 round the ring; "
|
|
"edges 40 (Euler-Poincare with the ring's two loops)", base=B1)
|
|
# 011: the tier-08 part's cavity at t = 1.5 (offset faces extended to meet at concave edges).
|
|
t9 = 1.5
|
|
SQ9 = t9 * t9
|
|
chord9 = lambda y: 2 * math.sqrt(max(3.15 ** 2 - (y - 35) ** 2, 0))
|
|
ov_ch = quad_split(lambda y: chord9(y) * max(0, 33.5 - (73 - t9 * math.sqrt(2) - y)), 73 - t9 * math.sqrt(2) - 33.5, 38.15, 200, 16)
|
|
ov_rd = quad_split(lambda y: chord9(y) * max(0, 33.5 - (32 + math.sqrt(max(SQ9 - (y - 33) ** 2, 0)))), 31.85, 33, 200, 16)
|
|
def dist_arch(x, z):
|
|
lo, hi = (0.0, 0.5) if x >= 30 else (0.5, 1.0)
|
|
f = lambda u: math.dist(bez(Pw, u), (x, z))
|
|
for _ in range(100):
|
|
m1, m2 = lo + (hi - lo) * 0.382, lo + (hi - lo) * 0.618
|
|
if f(m1) < f(m2):
|
|
hi = m2
|
|
else:
|
|
lo = m1
|
|
return f((lo + hi) / 2)
|
|
def half_len(z):
|
|
if dist_arch(30, z) > t9:
|
|
return 0.0
|
|
a, b = 30.0, 40.0
|
|
for _ in range(60):
|
|
m = (a + b) / 2
|
|
if dist_arch(m, z) <= t9:
|
|
a = m
|
|
else:
|
|
b = m
|
|
return a - 30
|
|
ov_win = quad_split(lambda z: 2 * half_len(z) * max(0.0, 33 - math.sqrt(max(SQ9 - (z - 32) ** 2, 0)) - 31.5), 32, 31 + t9, 50, 16)
|
|
th9 = PI - math.acos(3 / math.sqrt(153))
|
|
lb9 = 6.5 + 28.5 - (37 - t9 * math.sqrt(2))
|
|
Vcav9 = (57 * (37 * 18.5 + 7 * 15) - 2 * SPANDREL * 3.5 ** 2 * 18.5 - 57 * SPANDREL * SQ9 - 57 * (t9 * math.sqrt(2) - 1) ** 2 / 2
|
|
+ PI * 6.5 ** 2 * 10 - 2 * PI * (6.5 - lb9 / 3) * lb9 * lb9 / 2 + 2 * PI * (6.5 + XBAR * 2.5) * SPANDREL * 6.25
|
|
- PI * 3.6 ** 2 * 6.5 - PI * 2.1 ** 2 * t9 - 2 * PI * (2.1 + t9 / 2) * SQ9
|
|
- 18.5 * (15 * 11 + PI * 5.5 ** 2) - PI * 16 * 18.5 - PI * 3.15 ** 2 * 33.5 + ov_ch + ov_rd
|
|
- 7 * (Awin + (bez_len(Pw) + 20) * t9 + PI * SQ9 + 2 * SQ9 * (math.tan(th9 / 2) - th9 / 2)) + ov_win)
|
|
cav_round_extra = 57 * SQ9 * SPANDREL + 2 * PI * (2.1 + t9 / 2) * SQ9 - 2 * PI * (2.1 + 4 * t9 / (3 * PI)) * PI * SQ9 / 4 + 7 * 2 * SQ9 * (math.tan(th9 / 2) - th9 / 2)
|
|
V9 = V8 - Vcav9
|
|
case(T9, "011-part-shell", "the running part shelled 1.5 mm open at the bottom",
|
|
[S([[30, 20, 0]], 1.5)],
|
|
{"body_count": 1, "volume_mm3": V9, "bbox": {"min": [0, 0, 0], "max": [60, 40, 35]}, "tolerance": {"rel": 1e-4}},
|
|
"V = the tier-08 part - its cavity, the part's inside at 1.5 from every face but the open bottom, the offset faces extended to meet at the part's concave edges "
|
|
"(as every shell in this tier: sharp inner corners). Cavity: the L section (x 1.5..58.5; y 1.5..38.5 under z 18.5, y 31.5..38.5 under z 33.5) less the r5 -> r3.5 front "
|
|
"rounds, the wall's r3 -> r1.5 round and its 2 mm chamfer -> a (1.5 sqrt2 - 1) chamfer; the boss column r6.5 z 18.5..28.5 with its 1 mm chamfer -> 0.121, the concave r1 "
|
|
"-> r2.5 at its root (Pappus), less the M5 hole grown 1.5 (r3.6, its floor's edge kept sharp); less the slot grown to width 11, the M6 tap drill to r4, the d3.3 hole to r3.15 "
|
|
"(its overlaps with the wall's inner round and chamfer, %.4f and %.4f, added back), the window grown 1.5 through the wall's 7 mm inside (Steiner, A + L t + pi t^2, its two "
|
|
"corners sharp: + 2 t^2 (tan(th/2) - th/2)), and its overlap with the inner round (%.4f) added back = %.6f. A distance-based offset (concave edges rounded r1.5) "
|
|
"would leave a cavity %.2f larger. Bbox: the part's" % (ov_ch, ov_rd, ov_win, Vcav9, cav_round_extra), base=C8)
|
|
C9 = up(T9, "011-part-shell")
|
|
case(T9, "012-closed-shell-sealed-void", "the stock shelled 2 mm with no face open: a closed body with a sealed void", [S([], 2)],
|
|
{"body_count": 1, "shells": 2, "volume_mm3": VB - 56 * 36 * 16, "faces": 12},
|
|
"void 56x36x16: V = 48000 - 32256; faces 6 outer + 6 inner; one body, an outer and an inner shell", base=B1)
|
|
DOME = sketch(vplane([0, 0, 0]), line([[0, 0], [20, 0]]), C("sketch.arc.center_point", center=[0, 0], start=[20, 0], end=[0, 20]), line([[0, 20], [0, 0]]))
|
|
case(T9, "013-dome-shelled-from-base", "a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane",
|
|
DOME + [C("solid.revolve", axis="Z", angle="360 deg", operation="new"), S([[10, 0, 0]], 2)],
|
|
{"body_count": 1, "volume_mm3": 2 / 3 * PI * (20 ** 3 - 18 ** 3), "faces": 3},
|
|
"V = (2/3) pi (20^3 - 18^3); faces: outer sphere, inner sphere, base ring")
|
|
dr5 = 20 * math.tan(math.radians(5))
|
|
tan5 = math.tan(math.radians(5))
|
|
def drafted_corner(r):
|
|
a, b = r * math.sqrt(1 + 2 * tan5 * tan5), r
|
|
p = math.sqrt((a * a + b * b) / 2)
|
|
return p * p - a * b * math.atan(a / b)
|
|
o14 = 2 * math.sqrt(1 + tan5 * tan5)
|
|
sec_out = lambda z: 4 * (60 - tan5 * z) * (40 - tan5 * z) - 4 * drafted_corner(4)
|
|
sec_in = lambda z: 4 * (60 - tan5 * z - o14) * (40 - tan5 * z - o14) - 4 * drafted_corner(2)
|
|
V14 = quad(sec_out, 0, 40) - quad(sec_in, 2, 40)
|
|
Z14 = (quad(lambda z: z * sec_out(z), 0, 40) - quad(lambda z: z * sec_in(z), 2, 40)) / V14
|
|
case(T9, "014-drafted-box-with-rounds-shelled",
|
|
"a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design)",
|
|
sketch("XY", C("sketch.rectangle.center", center=[0, 0], corner=[60, 40]))
|
|
+ [C("solid.extrude", distance=40, taper="-5 deg", operation="new"),
|
|
F([[sx * (60 - dr5), sy * (40 - dr5), 20] for sx, sy in [(1, 1), (1, -1), (-1, 1), (-1, -1)]], 4), S([[0, 0, 40]], 2)],
|
|
{"body_count": 1, "volume_mm3": V14, "faces": 19, "edges": 48, "vertices": 32, "center_of_mass": [0, 0, Z14], "bbox": {"min": [-60, -40, 0], "max": [60, 40, 40]},
|
|
"tolerance": {"rel": 1e-5}},
|
|
"the record's geometry check must hold too (every edge of the four inner rounds lies on its faces; the old offset left them up to 0.02 mm off, which other STEP readers reject). "
|
|
"A round of radius r between two faces drafted 5 deg is a cylinder along their slanted common edge; a level plane cuts it in an ellipse of semi-axes r and r sqrt(1 + 2 tan^2 5) "
|
|
"(the axis leans that much from vertical), tangent to the section's two side lines, and every level section is the same corner moved along: the corner's loss "
|
|
"c(r) = p^2 - a b atan(a/b), p = sqrt((a^2 + b^2)/2), is constant (r^2 (1 - pi/4) undrafted). Outside: int_0^40 (120 - 2 z tan5)(80 - 2 z tan5) dz - 4 c(4) 40; the cavity "
|
|
"(sides moved in 2 sqrt(1 + tan^2 5) level, floor z = 2, rounds 4 - 2 = 2): int_2^40 ... - 4 c(2) 38; V = outside - cavity, the centre of mass on the axis at the moments' "
|
|
"z. Faces 9 outside, 9 inside, the rim; vertices 8 per loop of four; edges 48 (the rim has two loops)",
|
|
source="analytic", sources=["tangency-labs/solidcraft#3576", "tangency-labs/solidcraft#3573"])
|
|
case(T9, "015-shelled-dome-ring-joined-back",
|
|
"a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result'",
|
|
sketch(vplane([0, 0, 0]), line([[0, 0], [20, 0]]), C("sketch.arc.three_point", start=[20, 0], through=[14.142136, 14.142136], end=[0, 20]), line([[0, 20], [0, 0]]), name="Quarter")
|
|
+ [C("solid.revolve", sketch="Quarter", axis="y", body_name="Dome"), S([[0, 0, 0]], 2),
|
|
C("solid.extrude", face=[19, 0, 0], face_body="Dome", distance=10, direction="negative", operation="join")],
|
|
{"body_count": 1, "volume_mm3": 2 / 3 * PI * (20 ** 3 - 18 ** 3) + 760 * PI - 2 * PI / 3 * 76 ** 1.5},
|
|
"shell: (2/3) pi (20^3 - 18^3). The ring's prism r 18..20, z 0..10 lies inside the dome's wall where r^2 + z^2 <= 20^2 (r >= 18 keeps it outside the cavity) and pokes out elsewhere: "
|
|
"it adds 760 pi - Int_18^20 2 pi r sqrt(400 - r^2) dr = 760 pi - (2 pi/3) 76^1.5",
|
|
sources=["tangency-labs/solidcraft#4847"])
|
|
|
|
# ---------------------------------------------------------------- 10 patterns and mirrors
|
|
case(T10, "001-rect-pattern-holes", "a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate",
|
|
[box([0, 0, 0], 60, 40, 10, body_name="Part"), H(position=[10, 10, 10], diameter=5, name="H"),
|
|
C("solid.pattern.rectangular", features=["H"], dir1=[1, 0, 0], count1=3, spacing1=20, dir2=[0, 1, 0], count2=2, spacing2=20)],
|
|
{"body_count": 1, "volume_mm3": 24000 - 6 * PI * 6.25 * 10, "faces": 12}, "six holes pi 2.5^2 10")
|
|
case(T10, "002-circular-pattern-holes", "a d6 hole patterned 8 times round a disk r30 h10",
|
|
[cyl([0, 0, 0], 30, 10, body_name="Part"), H(position=[20, 0, 10], diameter=6, name="H"), C("solid.pattern.circular", features=["H"], axis="Z", count=8)],
|
|
{"body_count": 1, "volume_mm3": PI * 900 * 10 - 8 * PI * 9 * 10, "faces": 11}, "eight holes pi 3^2 10")
|
|
# union of 6 disks r5 centred on a circle r6: polar integral of the covered radial intervals
|
|
def covered(theta):
|
|
iv = []
|
|
for k in range(6):
|
|
a = theta - k * PI / 3
|
|
disc = 36 * math.cos(a) ** 2 - 11
|
|
if disc > 0 and math.cos(a) > 0:
|
|
iv.append((6 * math.cos(a) - math.sqrt(disc), 6 * math.cos(a) + math.sqrt(disc)))
|
|
iv.sort()
|
|
tot, cur = 0.0, None
|
|
for a, b in iv:
|
|
if cur is None or a > cur[1]:
|
|
if cur: tot += (cur[1] ** 2 - cur[0] ** 2) / 2
|
|
cur = [a, b]
|
|
else:
|
|
cur[1] = max(cur[1], b)
|
|
return tot + ((cur[1] ** 2 - cur[0] ** 2) / 2 if cur else 0)
|
|
Au = 12 * quad_split(covered, 0, PI / 6, 400, 32)
|
|
Au_check = 6 * PI * 25 # sanity: less than the disks' sum
|
|
assert Au < Au_check
|
|
case(T10, "003-overlapping-pattern-leaves-core", "six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free",
|
|
[cyl([0, 0, 0], 20, 10, body_name="Part"), cyl([6, 0, -1], 5, 12, operation="cut", targets=["Part"], name="H"), C("solid.pattern.circular", features=["H"], axis="Z", count=6)],
|
|
{"body_count": 2, "volume_mm3": PI * 400 * 10 - Au * 10},
|
|
f"neighbouring cuts overlap (centres 6 apart < 10) but none reaches the axis (6 > 5): a core is cut free; the union's area {Au:.9f} by a polar integral of the covered radial intervals")
|
|
case(T10, "004-mirror-body-joined", "a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide",
|
|
[box([0, 0, 0], 30, 40, 20, body_name="Part"), H(position=[20, 20, 20], diameter=10),
|
|
C("solid.mirror", bodies=["Part"], plane={"origin": [30, 0, 0], "normal": [1, 0, 0]}, combine=True)],
|
|
{"body_count": 1, "volume_mm3": VB - 2 * PI * 25 * 20, "faces": 8}, "the stock with two holes at x=20 and 40; the mirror face merges away")
|
|
case(T10, "005-mirror-feature", "a d10 hole in the stock mirrored about x=30 as a feature",
|
|
[H(position=[20, 20, 20], diameter=10, name="H"), C("solid.mirror", features=["H"], plane={"origin": [30, 0, 0], "normal": [1, 0, 0]})],
|
|
{"body_count": 1, "volume_mm3": VB - 2 * PI * 25 * 20, "faces": 8}, "two holes pi 5^2 20", base=B1)
|
|
case(T10, "006-circular-pattern-counterbores", "a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10",
|
|
[cyl([0, 0, 0], 30, 10, body_name="Part"), H(position=[20, 0, 10], diameter=5, type="counterbore", cb_diameter=9, cb_depth=3, name="CB"),
|
|
C("solid.pattern.circular", features=["CB"], axis="Z", count=6)],
|
|
{"body_count": 1, "volume_mm3": PI * 900 * 10 - 6 * (PI * 6.25 * 7 + PI * 20.25 * 3), "faces": 21}, "each removes pi 2.5^2 7 + pi 4.5^2 3; 3 faces each")
|
|
case(T10, "007-pattern-bodies", "a pin r3 h10 patterned 4 times at 10 mm as bodies",
|
|
[cyl([0, 0, 0], 3, 10, body_name="Pin"), C("solid.pattern.rectangular", bodies=["Pin"], dir1=[1, 0, 0], count1=4, spacing1=10)],
|
|
{"body_count": 4, "volume_mm3": 4 * PI * 9 * 10, "faces": 12}, "four separate pins")
|
|
case(T10, "008-part-vents", "the running part with a d3 vent hole in its top patterned 4 times at 5 mm",
|
|
[H(position=[30, 24, 20], diameter=3, name="Vent"), C("solid.pattern.rectangular", features=["Vent"], dir1=[1, 0, 0], count1=4, spacing1=5)],
|
|
{"body_count": 1, "volume_mm3": V9 - 4 * PI * 1.5 ** 2 * 1.5, "bbox": {"min": [0, 0, 0], "max": [60, 40, 35]}, "tolerance": {"rel": 1e-4}},
|
|
"pattern = 4 x the feature: each d3 vent goes through the shelled top skin (z 18.5..20) into the cavity and meets nothing else (the M6 hole's tube is 7.3 away, "
|
|
"the wall's 6 past y = 24): V = 09/011 - 4 pi 1.5^2 1.5; the bbox is the part's", base=C9)
|
|
C10 = up(T10, "008-part-vents")
|
|
|
|
# ---------------------------------------------------------------- 11 cumulative parts
|
|
VL = 40 * 816 + SPANDREL * 25 * 40 - 12.5 * 40 - 2 * PI * 16 * 8
|
|
case(T11, "001-bracket", "an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg",
|
|
sketch(plane([0, 40, 0], [1, 0, 0], [0, 0, 1]), line([[0, 0], [60, 0], [60, 8], [8, 8], [8, 50], [0, 50]], closed=True)) + [C("solid.extrude", distance=40, body_name="Part"),
|
|
F([[8, 20, 8]], 5), K([[0, 20, 0]], 5), H(position=[40, 20, 8], diameter=8), H(position=[8, 20, 30], diameter=8)],
|
|
{"body_count": 1, "volume_mm3": VL, "faces": 12},
|
|
"L section 60*8 + 8*42 = 816 times 40; + (1-pi/4) 25 40 (concave round) - 12.5*40 (chamfer) - 2 pi 4^2 8 (holes, 8 thick legs); features apart from each other")
|
|
Vf = PI * ((1600 - 64) * 10 + (225 - 64) * 20) - 6 * PI * 16 * 10 - 1.125 * 2 * PI * 14.5 + SPANDREL * 9 * 2 * PI * (15 + 3 * XBAR)
|
|
FL = sketch(vplane([0, 0, 0]), line([[8, 0], [40, 0], [40, 10], [15, 10], [15, 30], [8, 30]], closed=True)) + [C("solid.revolve", axis="Z", body_name="Part"),
|
|
H(position=[28, 0, 10], diameter=8, name="Bolt"), C("solid.pattern.circular", features=["Bolt"], axis="Z", count=6),
|
|
K([[15, 0, 30]], 1.5), F([[15, 0, 10]], 3)]
|
|
case(T11, "002-flange", "a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round", FL,
|
|
{"body_count": 1, "volume_mm3": Vf, "faces": 14},
|
|
"pi((40^2-8^2)10 + (15^2-8^2)20) - 6 pi 4^2 10 - 1.125 * 2 pi 14.5 (chamfer, Pappus) + (1-pi/4) 9 * 2 pi (15 + 3(10-3pi)/(12-3pi)) (concave round)")
|
|
w30 = ext_half_width(30, 3.5)
|
|
case(T11, "003-threaded-flange", "the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk",
|
|
[thr([15, 0, 20], designation="M30"), H(position=[0, 28, 10], thread="M8", name="Tap"), C("solid.pattern.circular", features=["Tap"], axis="Z", count=3)],
|
|
{"body_count": 1, "volume_mm3": Vf - groove(30, 3.5, [(13 + w30, 28.5, lambda z: 15), (28.5, 30, lambda z: 15 - (z - 28.5))]) - 3 * PI * 3.375 ** 2 * 10,
|
|
"bbox": {"min": [-40, -40, 0], "max": [40, 40, 30]}, "tolerance": {"rel": 1e-4}},
|
|
"the hub's cylinder (r15) runs from the r3 round at its root (z 13) to the 1.5 chamfer at its top (z 28.5): the M30 groove (P 3.5) stops w = %.6f clear of the round, "
|
|
"a shoulder (06/007's rule), and runs out through the chamfer, a free end (06/006's): it removes the stock less 2 pi int int r m(r) dr dz over z 13 + w..28.5 at r 15 and the chamfer "
|
|
"(r 15 - (z - 28.5)); the bore r8 is inside the root r 13.1. The M8 tap drills (6.75) go through the 10 mm disk at r 28, 90 deg + k 120, clear of the bolt holes (30 deg apart): "
|
|
"3 pi 3.375^2 10. Bbox: the flange's" % w30, base=up(T11, "002-flange"))
|
|
case(T11, "004-housing", "the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss",
|
|
[thr([23, 15, 25], designation="M16")],
|
|
{"body_count": 1, "volume_mm3": V9 - 4 * PI * 1.5 ** 2 * 1.5 - groove(16, 2, [(21 + w16, 29, lambda z: 8), (29, 30, lambda z: 8 - (z - 29))]),
|
|
"bbox": {"min": [0, 0, 0], "max": [60, 40, 35]}, "tolerance": {"rel": 1e-4}},
|
|
"10/008 less the M16 groove on the boss: its cylinder runs from the r1 root round (z 21, a shoulder: the groove stops w = %.6f clear of it) to the 1 mm top chamfer "
|
|
"(z 29, run out through it, a free end); the groove's root r 6.917 stays outside the boss's 1.5 wall's inside (r 6.5), so it cuts the wall only. Bbox: the part's" % w16, base=C10)
|
|
|
|
# manifest: tiers in order, cases in authoring order until --record sorts them by time
|
|
WHAT = {
|
|
T1: "primitives with closed-form volumes", T2: "booleans in the degeneracy classes, and cuts that end in a single line",
|
|
T3: "extrudes and revolves of line-and-arc profiles", T4: "spline profiles, sweeps and lofts", T5: "holes and tapped holes",
|
|
T6: "modelled threads", T7: "constant, variable and corner fillets", T8: "chamfers", T9: "shells and offsets",
|
|
T10: "patterns and mirrors", T11: "parts combining every tier"}
|
|
mpath = os.path.join(ROOT, "ladder.json")
|
|
order = [T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T11]
|
|
try:
|
|
with open(mpath) as f:
|
|
listed = {t["tier"]: t["cases"] for t in json.load(f)["tiers"]}
|
|
except FileNotFoundError:
|
|
listed = {}
|
|
tiers = []
|
|
for t in order:
|
|
made = [f"ladder/{t}/{n}" for tt, n in CASES if tt == t]
|
|
# The recorded order first, then cases new to the tier in the order they are made here.
|
|
kept = [c for c in listed.get(t, []) if c in made or not c.startswith("ladder/")]
|
|
tiers.append({"tier": t, "what": WHAT[t], "cases": kept + [c for c in made if c not in kept]})
|
|
m = {"what": "the kernel complexity ladder: tiers in order of complexity, each building on the shapes before it; cases within a tier in order of measured time (cargo xtask kernel-cases --ladder --record)",
|
|
"tiers": tiers}
|
|
with open(mpath, "w") as f:
|
|
json.dump(m, f, indent=2, sort_keys=True)
|
|
f.write("\n")
|
|
print(len(CASES), "cases")
|