solvecraft/docs/features.md

# Features

SolidCraft's commands by area, generated by `cargo xtask features` from the command registry (`solidcraft-cli commands`). Planned commands are marked in their rows. Every command runs the same way from the toolbar, a script, `solidcraft-cli exec <id> '<json>'`, the control channel and MCP; parameters are in the [command reference](book/src/reference/commands.md) (`cargo xtask book`). Status and plans: [ROADMAP](../ROADMAP.md).

## Sketch

| Command | Id | Toolbar |
|---|---|---|
| Center Point Arc | `sketch.arc.center_point` | SKETCH › CREATE |
| Tangent Arc | `sketch.arc.tangent` | SKETCH › CREATE |
| 3-Point Arc | `sketch.arc.three_point` | SKETCH › CREATE |
| 3D Arc | `sketch.arc3d` | – |
| AutoConstrain | `sketch.auto_constrain` | SKETCH › CONSTRAINTS |
| AutoConstrain from datum | `sketch.auto_constrain_from_datum` | SKETCH › CONSTRAINTS |
| Auto-Project Edges on Reference | `sketch.auto_project` | – |
| Blend Curve | `sketch.blend_curve` | SKETCH › MODIFY |
| Break | `sketch.break` | SKETCH › MODIFY |
| Break Link | `sketch.break_link` | – |
| Cancel Sketch | `sketch.cancel` | SKETCH › FINISH SKETCH |
| Centerline | `sketch.centerline` | SKETCH › CREATE |
| Chain | `sketch.chain` | – |
| Distance and Angle Chamfer | `sketch.chamfer.distance_angle` | SKETCH › MODIFY |
| Equal Distance Chamfer | `sketch.chamfer.equal_distance` | SKETCH › MODIFY |
| Two Distance Chamfer | `sketch.chamfer.two_distance` | SKETCH › MODIFY |
| Center Diameter Circle (C) | `sketch.circle.center` | SKETCH › CREATE |
| 3-Point Circle | `sketch.circle.three_point` | SKETCH › CREATE |
| 3-Tangent Circle | `sketch.circle.three_tangent` | SKETCH › CREATE |
| 2-Point Circle | `sketch.circle.two_point` | SKETCH › CREATE |
| 2-Tangent Circle | `sketch.circle.two_tangent` | SKETCH › CREATE |
| Conic Curve | `sketch.conic` | SKETCH › CREATE |
| Sketch Constrainer | `sketch.constrainer` | SKETCH › CREATE |
| Coincident | `sketch.constraint.coincident` | SKETCH › CONSTRAINTS |
| Collinear | `sketch.constraint.collinear` | SKETCH › CONSTRAINTS |
| Concentric | `sketch.constraint.concentric` | SKETCH › CONSTRAINTS |
| Curvature | `sketch.constraint.curvature` | SKETCH › CONSTRAINTS |
| Equal | `sketch.constraint.equal` | SKETCH › CONSTRAINTS |
| Fix/UnFix | `sketch.constraint.fix` | SKETCH › CONSTRAINTS |
| Horizontal/Vertical | `sketch.constraint.horizontal_vertical` | SKETCH › CONSTRAINTS |
| MidPoint | `sketch.constraint.midpoint` | SKETCH › CONSTRAINTS |
| Parallel | `sketch.constraint.parallel` | SKETCH › CONSTRAINTS |
| Perpendicular | `sketch.constraint.perpendicular` | SKETCH › CONSTRAINTS |
| Polygon | `sketch.constraint.polygon` | SKETCH › CONSTRAINTS |
| Symmetry | `sketch.constraint.symmetry` | SKETCH › CONSTRAINTS |
| Tangent | `sketch.constraint.tangent` | SKETCH › CONSTRAINTS |
| Normal/Construction (X) | `sketch.construction` | SKETCH › CREATE |
| Copy Sketch Entities | `sketch.copy` | – |
| Create Sketch | `sketch.create` | SOLID › CREATE |
| Cut Sketch Entities | `sketch.cut` | – |
| Delete Sketch Entities | `sketch.delete` | – |
| Sketch Dimension (D) | `sketch.dimension` | SKETCH › CREATE |
| Move Dimension Text | `sketch.dimension_text` | – |
| Drag Sketch Geometry | `sketch.drag` | – |
| End Sketch Drag | `sketch.drag_end` | – |
| Draw Dimensioned Sketch Geometry | `sketch.draw.dimensioned` | – |
| Drawing Size | `sketch.drawing_bounds` | – |
| Edit Sketch | `sketch.edit` | – |
| Edit Text | `sketch.edit_text` | – |
| Ellipse | `sketch.ellipse` | SKETCH › CREATE |
| Save As DXF | `sketch.export_dxf` | – |
| Extend | `sketch.extend` | SKETCH › MODIFY |
| Fillet | `sketch.fillet` | SKETCH › MODIFY |
| Finish Sketch | `sketch.finish` | SKETCH › FINISH SKETCH |
| Finish with AutoConstrain | `sketch.finish_auto_constrain` | SKETCH › FINISH SKETCH |
| Fit Curves to Mesh Section | `sketch.fit_curves_to_section` | SKETCH › CREATE |
| Constraint Glyphs | `sketch.glyphs` | – |
| Include 3D Geometry | `sketch.include_3d` | SKETCH › CREATE |
| Infinite Line | `sketch.infinite` | – |
| Insert DXF | `sketch.insert_dxf` | SKETCH › INSERT |
| Insert SVG | `sketch.insert_svg` | SKETCH › INSERT |
| Inspect Sketch | `sketch.inspect` | – |
| Intersect | `sketch.intersect` | SKETCH › CREATE |
| Intersection Curve | `sketch.intersection_curve` | SKETCH › CREATE |
| Isoparametric Curve | `sketch.isoparametric_curve` | SKETCH › CREATE |
| Line (L) | `sketch.line` | SKETCH › CREATE |
| Midpoint Line | `sketch.line.midpoint` | SKETCH › CREATE |
| 3D Line | `sketch.line3d` | – |
| Loose Ends | `sketch.loose_ends` | – |
| Tie Loose Ends | `sketch.loose_ends.tie` | – |
| Mirror | `sketch.mirror` | SKETCH › PATTERN |
| Move/Copy Sketch Entities | `sketch.move` | SKETCH › MODIFY |
| Move 3D Point | `sketch.move3d` | – |
| Drag Sketch Point | `sketch.move_point` | – |
| Offset (O) | `sketch.offset` | SKETCH › MODIFY |
| Break Offset Association | `sketch.offset.break` | – |
| Sketch Palette Options | `sketch.options` | – |
| Paste Sketch Entities | `sketch.paste` | – |
| Circular Pattern | `sketch.pattern.circular` | SKETCH › PATTERN |
| Rectangular Pattern | `sketch.pattern.rectangular` | SKETCH › PATTERN |
| Point | `sketch.point` | SKETCH › CREATE |
| 3D Point | `sketch.point3d` | – |
| Circumscribed Polygon | `sketch.polygon.circumscribed` | SKETCH › CREATE |
| Edge Polygon | `sketch.polygon.edge` | SKETCH › CREATE |
| Inscribed Polygon | `sketch.polygon.inscribed` | SKETCH › CREATE |
| Project (P) | `sketch.project` | SKETCH › CREATE |
| Project To Surface | `sketch.project_to_surface` | SKETCH › CREATE |
| Center Rectangle | `sketch.rectangle.center` | SKETCH › CREATE |
| Rounded Rectangle | `sketch.rectangle.rounded` | SKETCH › CREATE |
| 3-Point Rectangle | `sketch.rectangle.three_point` | SKETCH › CREATE |
| 2-Point Rectangle (R) | `sketch.rectangle.two_point` | SKETCH › CREATE |
| Redefine Sketch Plane | `sketch.redefine` | – |
| Sketch Scale | `sketch.scale` | SKETCH › MODIFY |
| Center Point Arc Slot | `sketch.slot.arc_center` | SKETCH › CREATE |
| Three Point Arc Slot | `sketch.slot.arc_three_point` | SKETCH › CREATE |
| Center Point Slot | `sketch.slot.center_point` | SKETCH › CREATE |
| Center to Center Slot | `sketch.slot.center_to_center` | SKETCH › CREATE |
| Overall Slot | `sketch.slot.overall` | SKETCH › CREATE |
| Snap Inference | `sketch.snap` | – |
| Solve Sketch | `sketch.solve` | – |
| Control Point Spline | `sketch.spline.control_point` | SKETCH › CREATE |
| Control Point Spline (Degree 5) | `sketch.spline.control_point_5` | SKETCH › CREATE |
| Fit Point Spline | `sketch.spline.fit_point` | SKETCH › CREATE |
| 3D Spline | `sketch.spline3d` | – |
| Spun Profile | `sketch.spun_profile` | SKETCH › CREATE |
| Text | `sketch.text` | SKETCH › CREATE |
| Toggle Driven Dimension | `sketch.toggle_driven` | – |
| Transform (G) | `sketch.transform` | SKETCH › MODIFY |
| Trim (T) | `sketch.trim` | SKETCH › MODIFY |
| Trim Along Path | `sketch.trim.path` | – |

## Solid modelling

| Command | Id | Toolbar |
|---|---|---|
| Align | `solid.align` | SOLID › MODIFY |
| Boundary Fill | `solid.boundary_fill` | SOLID › CREATE |
| Bounding Solid | `solid.bounding_solid` | SOLID › CREATE |
| Box | `solid.box` | SOLID › CREATE |
| Chamfer | `solid.chamfer` | SOLID › MODIFY |
| Coil | `solid.coil` | SOLID › CREATE |
| Combine | `solid.combine` | SOLID › MODIFY |
| Cone | `solid.cone` | SOLID › CREATE |
| Cylinder | `solid.cylinder` | SOLID › CREATE |
| Draft | `solid.draft` | SOLID › MODIFY |
| Emboss | `solid.emboss` | SOLID › CREATE |
| Extrude (E) | `solid.extrude` | SOLID › CREATE |
| Fillet (F) | `solid.fillet` | SOLID › MODIFY |
| Hole (H) | `solid.hole` | SOLID › CREATE |
| Loft | `solid.loft` | SOLID › CREATE |
| Mirror | `solid.mirror` | SOLID › CREATE |
| Move/Copy (M) | `solid.move` | SOLID › MODIFY |
| Offset Face | `solid.offset_face` | SOLID › MODIFY |
| Circular Pattern | `solid.pattern.circular` | SOLID › CREATE |
| Pattern on Path | `solid.pattern.path` | SOLID › CREATE |
| Rectangular Pattern | `solid.pattern.rectangular` | SOLID › CREATE |
| Pipe | `solid.pipe` | SOLID › CREATE |
| Press Pull (Q) | `solid.press_pull` | SOLID › MODIFY |
| Remove | `solid.remove` | SOLID › MODIFY |
| Replace Face | `solid.replace_face` | SOLID › MODIFY |
| Revolve | `solid.revolve` | SOLID › CREATE |
| Rib | `solid.rib` | SOLID › CREATE |
| Scale | `solid.scale` | SOLID › MODIFY |
| Shell | `solid.shell` | SOLID › MODIFY |
| Sphere | `solid.sphere` | SOLID › CREATE |
| Split Body | `solid.split_body` | SOLID › MODIFY |
| Split Face | `solid.split_face` | SOLID › MODIFY |
| Sweep | `solid.sweep` | SOLID › CREATE |
| Thread | `solid.thread` | SOLID › CREATE |
| Torus | `solid.torus` | SOLID › CREATE |
| Web | `solid.web` | SOLID › CREATE |

## Surfaces

| Command | Id | Toolbar |
|---|---|---|
| Blend Surface | `surface.blend` | SURFACE › CREATE |
| Boundary Surface | `surface.boundary` | SURFACE › CREATE |
| Extend | `surface.extend` | SURFACE › MODIFY |
| Surface Extrude | `surface.extrude` | SURFACE › CREATE |
| Fair Surface | `surface.fair` | SURFACE › MODIFY |
| Surface Fillet *(planned: [#769](https://github.com/bherbruck/solidcraft/issues/769))* | `surface.fillet` | SURFACE › MODIFY |
| Surface Loft | `surface.loft` | SURFACE › CREATE |
| Match Surface | `surface.match` | SURFACE › MODIFY |
| Offset Surface | `surface.offset` | SURFACE › CREATE |
| Patch | `surface.patch` | SURFACE › CREATE |
| Reverse Normal | `surface.reverse_normal` | SURFACE › MODIFY |
| Surface Revolve | `surface.revolve` | SURFACE › CREATE |
| Ruled Surface | `surface.ruled` | SURFACE › CREATE |
| Stitch | `surface.stitch` | SURFACE › MODIFY |
| Surface Sweep | `surface.sweep` | SURFACE › CREATE |
| Thicken | `surface.thicken` | SURFACE › CREATE |
| Trim | `surface.trim` | SURFACE › MODIFY |
| Unstitch | `surface.unstitch` | SURFACE › MODIFY |
| Untrim | `surface.untrim` | SURFACE › MODIFY |

## Construction geometry

| Command | Id | Toolbar |
|---|---|---|
| Axis Through Edge | `construct.axis.edge` | SOLID › CONSTRUCT |
| Axis Perpendicular To Face | `construct.axis.normal_to_face` | SOLID › CONSTRUCT |
| Axis Through Cylinder/Cone/Torus | `construct.axis.through_cylinder` | SOLID › CONSTRUCT |
| Axis Through Two Planes | `construct.axis.two_planes` | SOLID › CONSTRUCT |
| Axis Through Two Points | `construct.axis.two_points` | SOLID › CONSTRUCT |
| Plane Along Path | `construct.plane.along_path` | SOLID › CONSTRUCT |
| Plane at Angle | `construct.plane.at_angle` | SOLID › CONSTRUCT |
| Midplane | `construct.plane.midplane` | SOLID › CONSTRUCT |
| Offset Plane | `construct.plane.offset` | SOLID › CONSTRUCT |
| Perpendicular Plane | `construct.plane.perpendicular` | SOLID › CONSTRUCT |
| Tangent Plane | `construct.plane.tangent` | SOLID › CONSTRUCT |
| Plane Through Three Points | `construct.plane.three_points` | SOLID › CONSTRUCT |
| Plane Through Two Edges | `construct.plane.two_edges` | SOLID › CONSTRUCT |
| Point Along Path | `construct.point.along_path` | SOLID › CONSTRUCT |
| Point At Center Of Circle/Sphere/Torus | `construct.point.center` | SOLID › CONSTRUCT |
| Point At Edge And Plane | `construct.point.edge_plane` | SOLID › CONSTRUCT |
| Point Through Three Planes | `construct.point.three_planes` | SOLID › CONSTRUCT |
| Point Through Two Edges | `construct.point.two_edges` | SOLID › CONSTRUCT |
| Point At Vertex | `construct.point.vertex` | SOLID › CONSTRUCT |

## Sheet metal

| Command | Id | Toolbar |
|---|---|---|
| Convert to Sheet Metal | `sheet.convert` | SHEET METAL › CREATE |
| Export Bend Table | `sheet.export_bend_table` | – |
| Export Flat Pattern as DXF | `sheet.export_dxf` | – |
| Flange | `sheet.flange` | SHEET METAL › CREATE |
| Create Flat Pattern | `sheet.flat_pattern` | SHEET METAL › CREATE |
| Fold | `sheet.fold` | SHEET METAL › CREATE |
| Hem | `sheet.hem` | SHEET METAL › CREATE |
| Sheet Metal Rules | `sheet.manage_rules` | SHEET METAL › MODIFY |
| Path Flange | `sheet.path_flange` | SHEET METAL › CREATE |
| Perforate | `sheet.perforate` | SHEET METAL › CREATE |
| Refold | `sheet.refold` | SHEET METAL › MODIFY |
| List Sheet Metal Rules | `sheet.rules` | – |
| Unfold | `sheet.unfold` | SHEET METAL › MODIFY |

## Plastic parts

| Command | Id | Toolbar |
|---|---|---|
| Assign Plastic Rule | `plastic.assign_rule` | PLASTIC › SETUP |
| Boss | `plastic.boss` | PLASTIC › CREATE |
| Lip | `plastic.lip` | PLASTIC › CREATE |
| Manage Plastic Rules | `plastic.manage_rules` | PLASTIC › SETUP |
| Rest | `plastic.rest` | PLASTIC › CREATE |
| List Plastic Rules | `plastic.rules` | – |
| Snap Fit | `plastic.snap_fit` | PLASTIC › CREATE |

## Components

| Command | Id | Toolbar |
|---|---|---|
| Activate Component | `component.activate` | – |
| Break Link | `component.break_link` | – |
| Capture Position | `component.capture_position` | SOLID › POSITION |
| Find Identical Copies | `component.copies` | – |
| Paste Bodies | `component.copy_bodies` | – |
| New Component | `component.create` | SOLID › ASSEMBLE |
| Cycle Component Color | `component.cycle_color` | – |
| Delete Component | `component.delete` | – |
| Extract to File | `component.extract` | – |
| Create Components from Bodies | `component.from_bodies` | – |
| Insert Design | `component.insert_design` | SOLID › ASSEMBLE |
| List Links | `component.links` | – |
| List Components | `component.list` | – |
| Part Properties | `component.metadata` | – |
| Change Part Properties | `component.metadata.set` | – |
| Move Bodies to Component | `component.move_bodies` | – |
| Move Sketches to Component | `component.move_sketches` | – |
| Paste New | `component.paste_new` | – |
| Component Physical Properties | `component.properties` | – |
| Relink Source | `component.relink` | – |
| Rename Component | `component.rename` | – |
| Replace with Link | `component.replace_with_link` | – |
| Revert Position | `component.revert_position` | SOLID › POSITION |
| Unlock Contents | `component.unlock` | – |
| Update Links | `component.update_links` | – |

## Assembly joints

| Command | Id | Toolbar |
|---|---|---|
| As-Built Joint | `joint.as_built` | SOLID › ASSEMBLE |
| Cam | `joint.cam` | SOLID › ASSEMBLE |
| Joint (J) | `joint.create` | SOLID › ASSEMBLE |
| Delete Joint | `joint.delete` | – |
| Drive Joints | `joint.drive` | SOLID › ASSEMBLE |
| Edit Joint | `joint.edit` | – |
| Gear | `joint.gear` | SOLID › ASSEMBLE |
| Inspect Joint | `joint.inspect` | – |
| Joint Limits | `joint.limits` | – |
| List Joints | `joint.list` | – |
| Motion Link | `joint.motion_link` | SOLID › ASSEMBLE |
| Joint Origin | `joint.origin` | SOLID › CREATE |
| Rack and Pinion | `joint.rack_pinion` | SOLID › ASSEMBLE |
| Reach Point | `joint.reach` | – |
| Rigid Group | `joint.rigid_group` | SOLID › ASSEMBLE |
| Screw | `joint.screw` | SOLID › ASSEMBLE |
| Solve Joints | `joint.solve` | – |
| Sweep Joint | `joint.sweep` | – |

## Configurations

| Command | Id | Toolbar |
|---|---|---|
| Activate Configuration | `config.activate` | – |
| Configuration Column | `config.column` | – |
| Configure | `config.configure` | SOLID › CONFIGURE |
| Preview Configuration | `config.preview` | – |
| Configuration Row | `config.row` | – |
| Configuration Rule | `config.rule` | – |
| Configuration Rules | `config.rules` | – |
| Display Configuration Table | `config.table` | SOLID › CONFIGURE |

## Timeline

| Command | Id | Toolbar |
|---|---|---|
| Add Recorded Feature | `timeline.add` | – |
| Compute All | `timeline.compute_all` | SOLID › MODIFY |
| Copy Features | `timeline.copy` | – |
| Delete (Delete) | `timeline.delete` | SOLID › MODIFY |
| Feature Dependents | `timeline.dependents` | – |
| Edit Feature | `timeline.edit` | – |
| Export Command Script | `timeline.export_script` | – |
| New Feature Folder | `timeline.group` | – |
| Inspect Feature | `timeline.inspect` | – |
| Move Timeline Items | `timeline.move_many` | – |
| Move Features to Folder | `timeline.move_to_group` | – |
| Paste Features | `timeline.paste` | – |
| Edit Feature | `timeline.redefine` | – |
| Rename | `timeline.rename` | – |
| Rename Feature Folder | `timeline.rename_group` | – |
| Reorder Feature | `timeline.reorder` | – |
| Reorder Features | `timeline.reorder_many` | – |
| Roll History Marker | `timeline.roll_to` | – |
| Move Timeline Marker | `timeline.rollback` | – |
| Suppress Feature | `timeline.suppress` | – |
| Remove Feature Folders | `timeline.ungroup` | – |

## Inspect

| Command | Id | Toolbar |
|---|---|---|
| Accessibility Analysis | `inspect.accessibility` | SKETCH › INSPECT |
| Center of Mass | `inspect.center_of_mass` | SKETCH › INSPECT |
| Clearance | `inspect.clearance` | – |
| Enable Component Colors | `inspect.colored_components` | SOLID › INSPECT |
| Compare Bodies | `inspect.compare` | – |
| Continuity Analysis | `inspect.continuity` | SURFACE › INSPECT |
| Curvature Comb Analysis | `inspect.curvature_comb` | SKETCH › INSPECT |
| Curvature Map Analysis | `inspect.curvature_map` | SKETCH › INSPECT |
| Draft Analysis | `inspect.draft` | SKETCH › INSPECT |
| Environment Map Analysis | `inspect.environment_map` | SKETCH › INSPECT |
| Interference | `inspect.interference` | SOLID › INSPECT |
| Isocurve Analysis | `inspect.isocurve` | SKETCH › INSPECT |
| Measure (I) | `inspect.measure` | SOLID › INSPECT |
| Minimum Radius Analysis | `inspect.minimum_radius` | SKETCH › INSPECT |
| Parameter Sweep | `inspect.parameter_sweep` | – |
| Section Analysis | `inspect.section` | SOLID › INSPECT |
| Silhouette | `inspect.silhouette` | – |
| Zebra Analysis | `inspect.zebra` | SKETCH › INSPECT |

## Files

| Command | Id | Toolbar |
|---|---|---|
| Export | `file.export` | – |
| Export Current View as DXF | `file.export_view_dxf` | – |
| Insert Mesh | `file.insert_mesh` | SOLID › INSERT |
| Insert STEP | `file.insert_step` | SOLID › INSERT |
| New Design (Ctrl+N) | `file.new` | – |
| Open with EasyPrint | `file.open_in_easyprint` | – |
| Save (Ctrl+S) | `file.save` | – |
| Save As (Ctrl+Shift+S) | `file.save_as` | – |
| Save As Mesh | `file.save_mesh` | INSERT › FILES |
| Send to Slicer | `file.send_to_slicer` | INSERT › FILES |
| Installed Slicers | `file.slicers` | – |

## Documents

| Command | Id | Toolbar |
|---|---|---|
| Open (Ctrl+O) | `doc.open` | – |
| Recover Design | `doc.recover` | – |
| Discard Recovered Design | `doc.recovery_discard` | – |
| Recoverable Designs | `doc.recovery_list` | – |

## Edit

| Command | Id | Toolbar |
|---|---|---|
| Checkpoint | `edit.checkpoint` | – |
| Redo (Ctrl+Y) | `edit.redo` | – |
| Restore Checkpoint | `edit.restore_checkpoint` | – |
| Undo (Ctrl+Z) | `edit.undo` | – |

## `appearance.*`

| Command | Id | Toolbar |
|---|---|---|
| Appearance (A) | `appearance.assign` | SOLID › MODIFY |
| Appearance Library | `appearance.library` | – |
| List Appearances | `appearance.list` | – |

## `assembly.*`

| Command | Id | Toolbar |
|---|---|---|
| Bill of Materials | `assembly.bom` | SOLID › INSPECT |

## `body.*`

| Command | Id | Toolbar |
|---|---|---|
| Rename Body | `body.rename` | – |

## `browser.*`

| Command | Id | Toolbar |
|---|---|---|
| Collapse All | `browser.collapse_all` | – |
| Expand All | `browser.expand_all` | – |
| New Group | `browser.group` | – |
| Move Browser Items | `browser.move` | – |
| Order Browser Items | `browser.order` | – |
| Rename Group | `browser.rename_group` | – |
| Ungroup | `browser.ungroup` | – |
| Show/Hide | `browser.visibility` | – |

## `canvas.*`

| Command | Id | Toolbar |
|---|---|---|
| Calibrate Canvas | `canvas.calibrate` | – |
| Decal | `canvas.decal` | SKETCH › INSERT |
| Delete Canvas | `canvas.delete` | – |
| Edit Canvas | `canvas.edit` | SKETCH › INSERT |
| Canvas | `canvas.insert` | SKETCH › INSERT |
| Canvas to Sketch | `canvas.to_sketch` | – |

## `contact.*`

| Command | Id | Toolbar |
|---|---|---|
| Check Contact | `contact.check` | – |
| New Contact Set | `contact.create` | SOLID › ASSEMBLE |
| Disable Contact | `contact.disable_all` | SOLID › ASSEMBLE |
| Edit Contact Set | `contact.edit` | – |
| Enable All Contact | `contact.enable_all` | SOLID › ASSEMBLE |
| Enable Contact Sets | `contact.enable_sets` | SOLID › ASSEMBLE |
| List Contact Sets | `contact.list` | – |

## `diagnostics.*`

| Command | Id | Toolbar |
|---|---|---|
| Crash Report | `diagnostics.crash_report` | – |
| Crash Reports | `diagnostics.crash_reports` | – |
| Delete Crash Reports | `diagnostics.crash_reports.clear` | – |
| Crash Test | `diagnostics.crash_test` | – |

## `document.*`

| Command | Id | Toolbar |
|---|---|---|
| Inspect Design | `document.inspect` | – |
| Design Properties | `document.metadata` | – |
| Remove Design Property | `document.metadata.remove` | – |
| Change Design Properties | `document.metadata.set` | – |
| Design Revision | `document.revision` | – |
| Change Design Units | `document.units` | – |

## `engine.*`

| Command | Id | Toolbar |
|---|---|---|
| List Commands | `engine.commands` | – |
| Describe Command | `engine.describe` | – |

## `explode.*`

| Command | Id | Toolbar |
|---|---|---|
| Exploded View | `explode.create` | SOLID › ASSEMBLE |
| Delete Exploded View | `explode.delete` | – |
| List Exploded Views | `explode.list` | – |
| Show Exploded View | `explode.show` | – |

## `expr.*`

| Command | Id | Toolbar |
|---|---|---|
| Evaluate Expression | `expr.evaluate` | – |

## `face.*`

| Command | Id | Toolbar |
|---|---|---|
| Delete Face | `face.delete` | SOLID › MODIFY |

## `frame.*`

| Command | Id | Toolbar |
|---|---|---|
| Frame Member | `frame.member` | WELDMENTS › CREATE |
| Insert Profile | `frame.profile.insert` | – |
| Profile Library | `frame.profile.list` | – |
| Profile Properties | `frame.profile.properties` | – |

## `library.*`

| Command | Id | Toolbar |
|---|---|---|
| Apply Local Library Entry | `library.apply` | – |
| Export Design Library | `library.export` | – |
| Inspect Local Library | `library.inspect` | – |

## `material.*`

| Command | Id | Toolbar |
|---|---|---|
| Physical Material | `material.assign` | SOLID › MODIFY |
| New Physical Material | `material.create` | – |
| Delete Physical Material | `material.delete` | – |
| Edit Physical Material | `material.edit` | – |
| Inspect Physical Material | `material.inspect` | – |
| List Materials | `material.list` | – |
| Directional Elastic Modulus | `material.properties.directional` | – |
| Validate Physical Material Data | `material.properties.validate` | – |

## `mesh.*`

| Command | Id | Toolbar |
|---|---|---|
| Convert Mesh | `mesh.convert` | – |

## `model.*`

| Command | Id | Toolbar |
|---|---|---|
| List Edges | `model.edges` | – |
| List Faces | `model.faces` | – |
| List Threads | `model.threads` | – |

## `motion.*`

| Command | Id | Toolbar |
|---|---|---|
| Delete Motion Study | `motion.delete` | – |
| Export Motion Study | `motion.export` | – |
| Export Motion Animation | `motion.export_animation` | – |
| Motion Interference | `motion.interference` | – |
| List Motion Studies | `motion.list` | – |
| Play Motion Study | `motion.play` | – |
| Plot Motion Study | `motion.plot` | – |
| Motion Study | `motion.study` | SOLID › ASSEMBLE |
| Motion Trace | `motion.trace` | SOLID › ASSEMBLE |
| Edit Motion Trace | `motion.trace.edit` | – |
| Keep Motion Trace | `motion.trace.keep` | – |

## `occurrence.*`

| Command | Id | Toolbar |
|---|---|---|
| Paste (Instance) | `occurrence.copy` | – |
| Drag Occurrence | `occurrence.drag` | – |
| Ground | `occurrence.ground` | – |
| Move Occurrence | `occurrence.move` | – |
| Occurrence Physical Properties | `occurrence.properties` | – |
| Move to Component | `occurrence.reparent` | – |

## `parameters.*`

| Command | Id | Toolbar |
|---|---|---|
| Add User Parameter | `parameters.add` | – |
| Change Parameters | `parameters.change` | SOLID › MODIFY |
| Comment Parameter | `parameters.comment` | – |
| Complete Expression | `parameters.complete` | – |
| Delete Parameter | `parameters.delete` | – |
| Export Parameters | `parameters.export` | – |
| Favourite Parameter | `parameters.favorite` | – |
| Parameter Graph | `parameters.graph` | – |
| Import Parameters | `parameters.import` | – |
| List Parameters | `parameters.list` | – |
| Move Parameter | `parameters.move` | – |
| Rename Parameter | `parameters.rename` | – |
| Parameter Users | `parameters.users` | – |

## `parts.*`

| Command | Id | Toolbar |
|---|---|---|
| Insert Fastener | `parts.fastener` | SOLID › INSERT |
| Insert Part | `parts.insert` | – |
| Standard Parts | `parts.library` | – |
| Change Part Size | `parts.resize` | – |

## `render.*`

| Command | Id | Toolbar |
|---|---|---|
| Layered Surface Aging | `render.aging.describe` | – |
| Render Backends | `render.backends` | – |
| Frame Render Subject | `render.camera.fit` | – |
| Inspect Render Camera | `render.camera.get` | – |
| Set Render Camera | `render.camera.set` | – |
| Cancel Render | `render.cancel` | – |
| Lens and Creative Effects | `render.effects.describe` | – |
| Export Render Image | `render.export` | – |
| Inspect HDR Source | `render.hdr.inspect` | – |
| Apply Library Opaque Appearance | `render.library.appearance.apply` | – |
| Inspect Render Library Resource | `render.library.describe` | – |
| Apply Built-in HDR Environment | `render.library.environment.apply` | – |
| Browse Render Library | `render.library.list` | – |
| Prepare Physical Reference | `render.library.physical.prepare` | – |
| Inspect Original Surface Map | `render.library.preview` | – |
| Apply Authored Studio Lights | `render.library.studio.apply` | – |
| Prepare Authored Studio Lights | `render.library.studio.prepare` | – |
| Save Surface Binding | `render.library.surface.bind` | – |
| Prepare Authored Surface Maps | `render.library.surface.prepare` | – |
| Remove Surface Binding | `render.library.surface.unbind` | – |
| Find Render Library Targets | `render.library.targets` | – |
| Save Optical Binding | `render.optics.bind` | – |
| Remove Optical Binding | `render.optics.unbind` | – |
| Check Render Request | `render.preflight` | – |
| Apply Native Studio | `render.preset.apply` | – |
| Review Native Studio | `render.preset.resolve` | – |
| Review Fixed Sampling Budget | `render.quality.prepare` | – |
| Retain Displayed Render Result | `render.result.pin` | – |
| Regrade Linear Master | `render.result.regrade` | – |
| Inspect Render Scene | `render.scene` | RENDER › SCENE |
| Apply Render Camera | `render.settings.apply` | – |
| Save Render Settings with HDR | `render.settings.capture_hdr` | – |
| Render Settings | `render.settings.get` | – |
| Save Render Settings | `render.settings.set` | – |
| Duplicate Render Shot | `render.shot.duplicate` | – |
| Remove Render Shot | `render.shot.remove` | – |
| Rename Render Shot | `render.shot.rename` | – |
| Save Physical Render Background | `render.stage.backdrop` | – |
| Remove Render Stage | `render.stage.clear` | – |
| Save Render Ground | `render.stage.ground` | – |
| Render Image | `render.start` | RENDER › IMAGE |
| Render Progress | `render.status` | – |

## `select.*`

| Command | Id | Toolbar |
|---|---|---|
| Clear Selection | `select.clear` | – |
| Select | `select.set` | – |

## `selection.*`

| Command | Id | Toolbar |
|---|---|---|
| Delete | `selection.delete` | – |

## `view.*`

| Command | Id | Toolbar |
|---|---|---|
| Ambient Occlusion | `view.ambient_occlusion` | – |
| Restore Named View | `view.apply` | – |
| Back View (Ctrl+2) | `view.back` | – |
| Bottom View (Ctrl+6) | `view.bottom` | – |
| Delete Named View | `view.delete` | – |
| Fit (F6) | `view.fit` | – |
| Front View (Ctrl+1) | `view.front` | – |
| Graphics Preset | `view.graphics_preset` | – |
| Grid | `view.grid` | – |
| Ground shadow | `view.ground_shadow` | – |
| History layout | `view.history_layout` | – |
| Home view | `view.home` | – |
| Isometric View (Ctrl+7) | `view.isometric` | – |
| Workspace layout | `view.layout` | – |
| Left View (Ctrl+3) | `view.left` | – |
| List Named Views | `view.list` | – |
| Navigate View | `view.navigate` | – |
| Navigation bar | `view.navigation_bar` | – |
| Normal to Selection | `view.normal_to` | – |
| Perspective view | `view.perspective` | – |
| Rename Named View | `view.rename` | – |
| Right View (Ctrl+4) | `view.right` | – |
| New Named View | `view.save` | – |
| Continuous orbit | `view.spin` | – |
| Navigation tool | `view.tool` | – |
| Top View (Ctrl+5) | `view.top` | – |
| Visual style | `view.visual_style` | – |