Release 0.22.0

* Release 0.22.0: version bump, design format 35

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Release 0.22.0: tests no longer expect the folded render and material changes to be pending

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

.config/nextest.toml

@@ -42,7 +42,6 @@ filter = "binary(action_matrix) & test(=action_matrix_sample)"
 threads-required = 12
 priority = 100
 
-
 # The slowest tests start first, so a shard does not end with one of them running alone on a
 # core while the others sit idle (seed_81 alone takes about 20 minutes under CI load). Medians
 # from the CI test timings (the junit artifacts), slowest first; a test over ~100 s belongs here.
@@ -69,3 +68,60 @@ filter = """
 ))
 """
 priority = 100
+
+# Each nextest test has its own process/device. Concurrent cold lavapipe path
+# compiles contend for CPU and can exhaust the 600 s pipeline setup budget.
+# Serialize this module per CI shard; other tests retain their normal parallelism.
+[test-groups.gpu-path]
+max-threads = 1
+
+[[profile.ci.overrides]]
+filter = "package(=solidcraft-gpu) & test(/^path::/)"
+test-group = "gpu-path"
+
+# Full local validation opts into its own scheduling policy. Keep GitHub CI's
+# worker reservation and slow-test priorities above independent of this runner.
+[profile.local-ci]
+inherits = "ci"
+
+[[profile.local-ci.overrides]]
+filter = "binary(action_matrix) & test(=action_matrix_sample)"
+threads-required = "num-cpus"
+priority = 100
+
+[[profile.local-ci.overrides]]
+filter = "(package(solidcraft-engine) & test(=tests::robustness_goldens::seed_81)) | (package(solidcraft-kernel) & test(=tspline::tests::hostile_tsplines_never_panic))"
+priority = 99
+
+[[profile.local-ci.overrides]]
+filter = """
+(package(solidcraft-engine) & (
+    test(/^tests::robustness_goldens::seed_(81|45|20|24|95|02|57|40|18|48|32|46|85|61)$/)
+    | test(/^tests::robustness::/)
+    | test(=tests::hostile_params_never_panic)
+    | test(=cmd::clearance::tests::distances_are_exact_on_edges_and_curved_faces)
+    | test(=cmd::clipboard::tests::a_pasted_coil_joins_the_pasted_body)
+    | test(=tests::pleat_join::the_pleats_join_at_every_wall_from_2_4_to_2_6_mm)
+    | test(=tests::flush_join_loft::a_flange_flush_with_the_end_of_a_bent_tapered_tube_joins)
+    | test(=cmd::sheet::tests::perforated_sheet_takes_a_thousand_round_holes)
+    | test(=boolean_regression_tests::joined_loft_frames_plan_their_display_at_every_quality)
+))
+| (package(solidcraft-engine) & (binary(atomic_commands) | binary(step_export_regressions)))
+| (package(solidcraft-kernel) & (
+    test(=curveblend::tests::rolling_ball_turns_about_a_rounded_corner_of_its_radius)
+    | test(=tests::fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole)
+    | test(=tspline::tests::hostile_tsplines_never_panic)
+    | test(=fill::tests::regular_rims_of_three_to_eight_sides_fill_with_one_face_and_close_the_cup)
+    | test(/^issue_788_tests::equal_bores_crossing_/)
+))
+"""
+priority = 98
+
+# Native Windows shader/device creation must not overlap within the local run.
+[test-groups.windows-gpu]
+max-threads = 1
+
+[[profile.local-ci.overrides]]
+platform = "cfg(windows)"
+filter = "package(solidcraft-gpu) | package(solidcraft) | (package(solidcraft-ui-egui) & test(/(offscreen|gpu)/))"
+test-group = "windows-gpu"

.gitattributes

@@ -0,0 +1,3 @@
+# Preserve canonical source receipts and the runtime icon-discovery snapshot.
+.gitattributes text eol=lf
+/assets/icons/ui/design/requested_icons.txt text eol=lf

ATTRIBUTION.md

@@ -14,9 +14,33 @@ Editable drawing code, native projects and shipped exports are collected under `
 
 | File | Author | Source | Licence |
 |---|---|---|---|
+| assets/render/catalog/capabilities.json | SolidCraft contributors | Byte-identical runtime export of docs/render-materials/capabilities.json; generated and checked by tools/render-library/generate.py | MIT OR Apache-2.0 |
+| assets/render/catalog/environments.json | SolidCraft contributors | Byte-identical runtime export of docs/render-materials/environments.json; generated and checked by tools/render-library/generate.py | MIT OR Apache-2.0 |
+| assets/render/catalog/lighting.json | SolidCraft contributors | Byte-identical runtime export of docs/render-materials/lighting.json; generated and checked by tools/render-library/generate.py | MIT OR Apache-2.0 |
+| assets/render/catalog/materials.json | SolidCraft contributors | Byte-identical runtime export of docs/render-materials/materials.json; generated and checked by tools/render-library/generate.py | MIT OR Apache-2.0 |
+| assets/render/catalog/quality-presets.json | SolidCraft contributors | Byte-identical runtime export of docs/render-materials/quality-presets.json; generated and checked by tools/render-library/generate.py | MIT OR Apache-2.0 |
+| assets/render/catalog/scene-presets.json | SolidCraft contributors | Byte-identical runtime export of docs/render-materials/scene-presets.json; generated and checked by tools/render-library/generate.py | MIT OR Apache-2.0 |
 | examples/chebyshev-motion-trace.json | SolidCraft contributors | Original parametric Chebyshev lambda mechanism and associative-trace demo, constructed from analytic circle intersections; classical link proportions documented at https://doi.org/10.1002/rcs.70095; no external CAD geometry or artwork | MIT OR Apache-2.0 |
+| examples/material-card.json | SolidCraft contributors | original analytic box and explicitly synthetic engineering card; invented illustrative constants, no external material dataset | MIT OR Apache-2.0 |
+| examples/studio/author_sweep.py | SolidCraft contributors | original editable CAD scene and authoring metadata; no external assets | MIT OR Apache-2.0 |
+| examples/studio/author_scene.py | SolidCraft contributors | original editable CAD scene and authoring metadata; no external assets | MIT OR Apache-2.0 |
+| examples/studio/materials.json | SolidCraft contributors | original editable CAD scene and authoring metadata; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-exploded-sweep.json | SolidCraft contributors | original editable CAD scene and authoring metadata; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-exploded-render.json | SolidCraft contributors | original editable CAD scene and authoring metadata; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-exploded.json | SolidCraft contributors | original editable CAD scene and authoring metadata; no external assets | MIT OR Apache-2.0 |
+| examples/studio/stage1-sweep.json | SolidCraft contributors | original tangent circular-arc CAD cyclorama; no external assets | MIT OR Apache-2.0 |
+| examples/studio/stage1.json | SolidCraft contributors | original editable CAD studio scene; no imported geometry or external image assets | MIT OR Apache-2.0 |
+| examples/studio/stage1-render.json | SolidCraft contributors | original studio camera and lighting parameters | MIT OR Apache-2.0 |
 | examples/render-studio.json | SolidCraft contributors | original procedural box/cylinder enclosure script for the integrated Render workspace | MIT OR Apache-2.0 |
 | examples/render-opaque-studio.json | SolidCraft contributors | original procedural sphere study varying opaque metal fraction and roughness independently; no external assets or engineering data | MIT OR Apache-2.0 |
+| crates/gpu/src/path/denoise.wgsl | SolidCraft contributors | original bounded edge-aware a-trous spatial filter; GPU2 donor d710e31, no external shader source | MIT OR Apache-2.0 |
+| crates/gpu/src/path/denoise_guides.wgsl | SolidCraft contributors | original deterministic centre-ray material and geometry guide pass; GPU2 donor d710e31, no external shader source | MIT OR Apache-2.0 |
+| crates/gpu/src/path/shadows.wgsl | SolidCraft contributors | original bounded area, sun and environment visibility transport; GPU2 donor d710e31, no external shader source | MIT OR Apache-2.0 |
+| crates/gpu/src/path/textures.wgsl | SolidCraft contributors | original planar colour and normal map sampling; GPU2 donor d710e31, no external shader source | MIT OR Apache-2.0 |
+| assets/appearances/starter_pack.rs | SolidCraft contributors | original illustrative optical recipes, authored scalar values and future procedural resource descriptors; no measured or external material dataset | MIT OR Apache-2.0 |
+| examples/material-finishes.json | SolidCraft contributors | original procedural sphere study of six illustrative opaque finishes with generic material densities; no external assets or measured optical data | MIT OR Apache-2.0 |
+| examples/render-path-studio.json | SolidCraft contributors | original procedural opaque enclosure, teal insert and metal fasteners for progressive rendering; no imported models | MIT OR Apache-2.0 |
+| crates/gpu/src/path/path.wgsl | SolidCraft contributors | original software BVH traversal and path integration using the existing SolidCraft surface/studio equations; no external shader source | MIT OR Apache-2.0 |
 | crates/gpu/src/pbr.rs | SolidCraft contributors | original WGSL translation of SolidCraft's opaque surface and fixed studio reference, embedded as Rust source; no external shader code | MIT OR Apache-2.0 |
 | assets/icons/app/macos/source/SolidCraft.icon/icon.json | SolidCraft contributors | approved Icon Composer composition and appearance settings for the original SolidCraft artwork | MIT OR Apache-2.0 |
 | assets/icons/app/macos/source/SolidCraft.icon/Assets/02-grid.svg | SolidCraft contributors | original perspective grid with elliptical radial alpha, exported from VectorCraft | MIT OR Apache-2.0 |
@@ -25,6 +49,8 @@ Editable drawing code, native projects and shipped exports are collected under `
 | assets/icons/app/macos/exports/Assets.car | SolidCraft contributors | Apple actool compilation of assets/icons/app/macos/source/SolidCraft.icon for macOS; contains original artwork only | MIT OR Apache-2.0 |
 | assets/archive/icons/macos-v1/source/icon.vectorcraft | SolidCraft contributors | retained editable historical VectorCraft source, with named face and background layers; redundant exports retired | MIT OR Apache-2.0 |
 | assets/icons/app/macos/exports/icon.icns | SolidCraft contributors | macOS fallback compiled by Apple's actool from the approved assets/icons/app/macos/source/SolidCraft.icon composition | MIT OR Apache-2.0 |
+| assets/models/test_boat.bin | 3DBenchy.com | 3DBenchy.com | Public Domain |
+| assets/models/make_test_boat.py | SolidCraft contributors | original script that packs a model into the compact file above | MIT OR Apache-2.0 |
 | docs/screenshots/class-a-blend.png | SolidCraft contributors | screenshot of SolidCraft itself: two boxes bridged by `surface.blend` (a 40x10 sheet, `solidcraft-cli snapshot` of plan/evidence script ev_blend) | MIT OR Apache-2.0 |
 | docs/screenshots/class-a-crown.png | SolidCraft contributors | screenshot of SolidCraft itself: a patch crowned with `surface.patch crown=0.3` over a saddle rim (`solidcraft-cli snapshot`) | MIT OR Apache-2.0 |
 | docs/screenshots/class-a-boundary.png | SolidCraft contributors | screenshot of SolidCraft itself: a patch through two sketch lines built by `surface.boundary` with `crown: 0.4` (`solidcraft-cli snapshot`) | MIT OR Apache-2.0 |
@@ -96,6 +122,7 @@ Editable drawing code, native projects and shipped exports are collected under `
 | tests/oracle/63-hinge-knuckle/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/63-hinge-knuckle/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
 | tests/oracle/65-sketch-gear-tooth/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/65-sketch-gear-tooth/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
 | assets/appearances/library.rs | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
+| assets/appearances/opaque_finishes.rs | SolidCraft contributors | original illustrative opaque finish values; no external dataset, textures or measured engineering data | MIT OR Apache-2.0 |
 | assets/fonts/biz-udp-gothic/OFL.txt | The BIZ UDGothic Project Authors | Unmodified accompanying font licence | SIL OFL 1.1 |
 | assets/fonts/ibm-plex-mono/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
 | assets/fonts/ibm-plex-sans/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
@@ -343,6 +370,7 @@ Editable drawing code, native projects and shipped exports are collected under `
 | assets/icons/ui/design/svg/flat/stop.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/flat/shield.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/status_recovery.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
+| assets/icons/ui/design/svg/model/frame_member.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/placeholder.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/plane.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/plane_angle.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
@@ -526,9 +554,9 @@ crates/engine/src/tests/gltf_import.rs); no third-party models are committed.
 ## FreeCAD and Rhino import library
 
 FreeCAD `.FCStd` and Rhino `.3dm` files are read with [cadmpeg](https://github.com/cadmpeg/cadmpeg)
-0.6.1 (Apache-2.0), linked as the crates `cadmpeg-core`, `cadmpeg-ir`, `cadmpeg-registry`,
+0.6.3 (Apache-2.0), linked as the crates `cadmpeg-core`, `cadmpeg-ir`, `cadmpeg-registry`,
 `cadmpeg-container`, `cadmpeg-codec-freecad`, `cadmpeg-codec-rhino` and `cadmpeg-codec-step`
-in native builds (`crates/io/src/native_cad.rs`). Only those open-format codecs are built: no
+in native and browser builds (`crates/io/src/native_cad.rs`). Only those open-format codecs are built: no
 default features, so cadmpeg's codecs for commercial CAD formats and its ShapeManager/ACIS
 codec are not compiled in. Its licence text is in THIRD-PARTY-LICENSES.txt; no code from it is
 copied into SolidCraft.
@@ -561,3 +589,453 @@ A frame whose meshes the GPU refuses to stage (device lost or out of memory) is
 skipped with a warning instead of panicking (#1469).
 Paint callbacks are prepared only after a drawable is acquired, so a skipped
 surface frame cannot strand cached meshes without their GPU initialization.
+
+## Runtime studio lighting mathematics
+
+`crates/gpu/src/path/path.wgsl` implements the power-heuristic estimator from the
+mathematical description in [PBRT fourth edition, section 13.4](https://pbr-book.org/4ed/Light_Transport_I_Surface_Reflection/A_Better_Path_Tracer).
+No PBRT code or assets were copied. `crates/render/src/job/lighting.rs` evaluates
+[Krzysztof Narkowicz's published 2016 ACES rational fit](https://knarkowicz.wordpress.com/2016/01/06/aces-filmic-tone-mapping-curve/)
+using its published coefficients (author licenses the fit under CC0/MIT).
+These original implementations are under SolidCraft's MIT OR Apache-2.0 licence.
+
+## Original coffee framing variant
+
+| File | Author | Provenance | Licence |
+|---|---|---|---|
+| examples/studio/author_coffee_framing.py | SolidCraft contributors | original editable composition, camera and documentation; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-framing.json | SolidCraft contributors | original editable composition, camera and documentation; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-framing-sweep.json | SolidCraft contributors | original editable composition, camera and documentation; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-framing-render.json | SolidCraft contributors | original editable composition, camera and documentation; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-framing.md | SolidCraft contributors | original editable composition, camera and documentation; no external assets | MIT OR Apache-2.0 |
+
+## Original cylindrical coffee housing variant
+
+| File | Author | Provenance | Licence |
+|---|---|---|---|
+| examples/studio/author_coffee_cylinder.py | SolidCraft contributors | original parametric cylindrical CAD construction and editable command recipes; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-cylinder.json | SolidCraft contributors | original cylindrical housing on the original exploded coffee composition; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-cylinder-sweep.json | SolidCraft contributors | original cylindrical housing and continuous CAD cyclorama; no external assets | MIT OR Apache-2.0 |
+| examples/studio/coffee-cylinder-render.json | SolidCraft contributors | original camera, studio lighting and optical settings retained from the framing variant | MIT OR Apache-2.0 |
+| examples/studio/coffee-cylinder.md | SolidCraft contributors | original dimensional recipe, provenance and validation limitations | MIT OR Apache-2.0 |
+
+## Runtime environment sampling
+
+`crates/render/src/lighting/environment.rs` and the environment/sun portions of
+`crates/gpu/src/path/path.wgsl` are original SolidCraft implementations of
+solid-angle importance sampling and MIS, informed by the mathematical description
+in [PBRT fourth edition, sections 12.5](https://pbr-book.org/4ed/Light_Sources/Infinite_Area_Lights)
+and [13.4](https://pbr-book.org/4ed/Light_Transport_I_Surface_Reflection/A_Better_Path_Tracer).
+The procedural gradient and inline RGBE test fixtures are original mathematical
+colours, not downloaded imagery. No third-party environment images or shader code
+are included. Licence: MIT OR Apache-2.0.
+
+## Original tumbler showcase assets
+
+The CAD room, tumblers, window opening, wood/weave patterns and RGBE sky below
+are original SolidCraft contributor work. No third-party scene, photograph, HDRI,
+texture, or AI-generated artwork was used. Python authoring sources are included.
+All listed files use the repository MIT OR Apache-2.0 licence.
+
+| File | Source / author | Use | License |
+| --- | --- | --- | --- |
+| examples/studio/author_showcase.py | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/author_tumblers.py | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/textures/ATTRIBUTION.md | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/textures/author_textures.py | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/textures/environment-manifest.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/textures/manifest.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-hdr-textures-blocked-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-hdr-textures-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-materials.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-sun-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-sun-textures-blocked-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-sun-textures-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-sun.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-textures-blocked-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers-textures-render.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+| examples/studio/tumblers.json | Original SolidCraft contributors | Editable scene / runtime resource / reproducible authoring metadata | MIT OR Apache-2.0 |
+
+The original studio generators produce local ignored PNG maps and an RGBE gradient.
+Generated image bytes are not source assets; their authorship, licences and expected
+hashes are documented under `examples/studio/textures`. Rendered evidence belongs
+on the results branch. No photographs, scans or external image assets are included.
+
+## Additional render and showcase resources
+
+| File | Author | Source | Licence |
+|---|---|---|---|
+| assets/render/starter/tools/check_all.py | SolidCraft contributors | original read-only authored/native resource validation orchestration and evidence receipts | MIT OR Apache-2.0 |
+| assets/render/starter/tools/test_check_all.py | SolidCraft contributors | original validation-runner regression fixtures and subprocess tests | MIT OR Apache-2.0 |
+| assets/render/starter/tools/requirements.txt | SolidCraft contributors | pinned offline authoring tool requirements; no application dependency changes | MIT OR Apache-2.0 |
+| crates/render/examples/validate_starter.rs | SolidCraft contributors | original native resource conformance checker using public SolidCraft decoding, normalization, sampling and mip APIs | MIT OR Apache-2.0 |
+| .gitattributes | SolidCraft contributors | original canonical line-ending policy for the existing runtime icon-discovery manifest; no artwork or icon-assignment changes | MIT OR Apache-2.0 |
+| assets/render/.gitattributes | SolidCraft contributors | original canonical line-ending policy for SHA-256-pinned renderer authoring resources | MIT OR Apache-2.0 |
+| docs/render-materials/.gitattributes | SolidCraft contributors | original canonical line-ending policy for SHA-256-pinned renderer authoring resources | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/assembly-bench-soft.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/automotive-turntable.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/black-metal-strips.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/cnc-overhead.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/esd-bench-neutral.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/fdm-neutral-inspection.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/garage-door.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/hangar-skylight.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/home-workbench.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/makerspace-worklights.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/mechanical-bay.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/neutral-comparison.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/neutral-side-softbox.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/paint-inspection-bands.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/printed-part-photo.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/rework-offset-strips.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/robot-led-editorial.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/showroom-ribbons.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/spacecraft-clean-bay.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/sun-free-overcast.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/vacuum-black.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/warm-table-window.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/white-enveloping-studio.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/exports/woodshop-window.hdr | SolidCraft contributors | original analytic relative-radiance HDR export; recipe, linear-sRGB primaries and SHA-256 in assets/render/starter/environments/manifest.json; not measured photometry | MIT OR Apache-2.0 |
+| assets/render/starter/environments/manifest.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/environments/source/recipes.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/lighting/exports/rigs.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/lighting/recipe.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-001/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-001/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-001/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-001/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-001/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-002/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-002/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-002/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-002/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-002/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-003/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-003/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-003/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-003/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-003/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-004/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-004/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-004/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-004/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-004/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-005/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-005/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-005/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-005/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-005/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-006/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-006/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-006/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-006/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-006/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-007/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-007/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-007/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-007/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-007/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-008/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-008/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-008/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-008/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-008/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-009/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-009/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-009/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-009/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-009/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-010/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-010/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-010/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-010/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-010/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-011/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-011/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-011/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-011/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-011/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-012/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-012/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-012/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-012/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-012/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-013/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-013/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-013/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-013/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-013/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-014/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-014/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-014/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-014/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-014/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-015/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-015/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-015/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-015/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-015/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-016/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-016/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-016/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-016/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-016/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-017/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-017/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-017/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-017/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-017/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-018/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-018/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-018/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-018/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-018/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-019/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-019/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-019/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-019/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-019/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-020/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-020/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-020/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-020/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-020/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-021/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-021/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-021/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-021/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-021/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-022/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-022/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-022/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-022/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-022/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-023/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-023/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-023/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-023/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-023/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-024/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-024/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-024/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-024/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-024/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-025/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-025/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-025/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-025/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-025/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-026/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-026/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-026/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-026/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-026/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-027/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-027/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-027/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-027/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-027/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-028/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-028/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-028/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-028/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-028/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-029/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-029/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-029/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-029/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-029/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-030/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-030/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-030/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-030/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-030/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-031/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-031/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-031/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-031/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-031/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-032/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-032/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-032/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-032/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-032/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-033/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-033/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-033/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-033/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-033/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-034/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-034/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-034/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-034/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-034/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-035/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-035/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-035/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-035/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-035/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-036/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-036/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-036/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-036/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-036/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-037/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-037/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-037/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-037/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-037/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-038/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-038/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-038/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-038/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-038/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-039/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-039/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-039/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-039/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-039/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-040/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-040/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-040/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-040/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-040/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-041/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-041/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-041/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-041/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-041/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-042/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-042/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-042/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-042/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-042/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-043/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-043/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-043/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-043/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-043/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-044/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-044/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-044/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-044/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-044/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-045/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-045/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-045/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-045/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-045/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-046/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-046/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-046/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-046/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-046/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-047/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-047/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-047/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-047/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-047/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-048/base_color.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-048/height.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-048/metallic.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-048/normal_open_gl.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/exports/SURF-048/roughness.png | SolidCraft contributors | original deterministic periodic PBR map export; recipe, role, scale and SHA-256 in assets/render/starter/materials/manifest.json; not measured material data | MIT OR Apache-2.0 |
+| assets/render/starter/materials/manifest.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/materials/source/recipes.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/pack.json | SolidCraft contributors | original clean-room renderer resource recipe or manifest; authored/unbound scope and source receipts in assets/render/starter/README.md | MIT OR Apache-2.0 |
+| assets/render/starter/tools/environments.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/starter/tools/lighting.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/starter/tools/materials.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/starter/tools/test_environments.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/starter/tools/test_lighting.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/starter/tools/test_materials.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/starter/tools/validate_pack.py | SolidCraft contributors | original clean-room offline resource authoring, numerical verification or validation tool; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/selene/licenses/UFL.txt | Canonical Ltd. | exact Ubuntu Font Licence 1.0 notice retained from https://github.com/0xlillith/solidcraft-rover/blob/b32437915372d32b71419dc8f5143fe22ff1e869/UFL.txt for the modelled Ubuntu Light lettering | Ubuntu Font Licence 1.0 |
+| assets/render/selene/materials/appearance-pack.json | SolidCraft contributors | original clean-room English appearance authoring data: 48 illustrative opaque PBR projections with separate advanced target specifications; no measured dataset or external assets | MIT OR Apache-2.0 |
+| assets/render/selene/materials/appearance-swatches.json | SolidCraft contributors | original analytic command script for 48 opaque box swatches and a support base, derived only from the adjacent original appearance pack; no external artwork or engineering properties | MIT OR Apache-2.0 |
+| assets/render/selene/models/SELENE-functional.solidcraft | SolidCraft contributors (native enhancements); 0xlillith (original rover); SychPL / Mateusz Sych (supplied showcase assembly); Canonical Ltd. (lettering outlines) | native-command derivative of the unchanged author-supplied source, with original bearing, suspension, gripper, electronics and presentation work; source and final hashes in assets/render/selene/SOURCE.md and VALIDATION.md | Model and showcase contributions: MIT OR Apache-2.0 (explicit SychPL grant https://github.com/tangency-labs/solidcraft/pull/5494#issuecomment-6375788360); lettering: Ubuntu Font Licence 1.0, notice retained in assets/render/selene/licenses/UFL.txt |
+| assets/render/selene/motion/interference-pairs.json | SolidCraft contributors | original authored exact-body pair selection for bounded native clearance checks on the functional SELENE derivative; not a generated collision result | MIT OR Apache-2.0 |
+| assets/render/selene/motion/mechanism-acceptance.json | SolidCraft contributors | original kinematic acceptance criteria, inspected source-container bindings and analytic planning checks from cited public SolidCraft documentation and the admitted native source; derivative runtime acceptance is recorded separately | MIT OR Apache-2.0 |
+| assets/render/selene/motion/preflight-commands.json | SolidCraft contributors | original read-only inventory script using existing project commands; no source-model selectors or state mutations | MIT OR Apache-2.0 |
+| assets/render/selene/motion/sample-sequence.json | SolidCraft contributors | original future lunar sampling and sealed-vial dynamics state specification; no simulation or physical calibration result | MIT OR Apache-2.0 |
+| assets/render/selene/scenes/roles.json | SolidCraft contributors | original semantic role and candidate-material authoring specification for the prepared SELENE demo; no native geometry or external assets bundled | MIT OR Apache-2.0 |
+| assets/render/selene/scenes/shots.json | SolidCraft contributors | original shot, framing and staged-sequence authoring specification for the prepared SELENE demo; no render or simulation result claimed | MIT OR Apache-2.0 |
+| assets/render/selene/scenes/stages.json | SolidCraft contributors | original stage composition and light-ownership authoring specification derived from the project render catalog; scientific context linked in scenes/README.md | MIT OR Apache-2.0 |
+| assets/render/selene/source-lock.json | SolidCraft contributors | original source-admission metadata and public-reference inventory pinning the supplied improved SELENE native file; original-model and font notices preserved in SOURCE.md | MIT OR Apache-2.0 |
+| assets/render/selene/source/SELENE-showcase.solidcraft | 0xlillith (original rover); SychPL / Mateusz Sych (showcase assembly and helpers); SolidCraft contributors (emblem); Canonical Ltd. (lettering outlines) | unchanged author-published native file from https://github.com/SychPL/solidcraft/blob/32ec1720447e3fcc6bb6cc53a63fb5b39cfa21b9/SELENE-showcase.solidcraft; source hash and license evidence in assets/render/selene/SOURCE.md | Model and showcase contributions: MIT OR Apache-2.0 (explicit SychPL grant https://github.com/tangency-labs/solidcraft/pull/5494#issuecomment-6375788360); lettering: Ubuntu Font Licence 1.0, notice retained in assets/render/selene/licenses/UFL.txt |
+| assets/render/selene/tools/bearings.py | SolidCraft contributors | original native-command authoring of grooved bearings, rolling-element kinematics, clamp hubs and arm/head clearances; analytic geometry, no copied CAD source | MIT OR Apache-2.0 |
+| assets/render/selene/tools/build.py | SolidCraft contributors | original Python development tool for pinned-source native command replay, staged checkpoints, command-trace and geometry health checks; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/selene/tools/electronics.py | SolidCraft contributors | original native-command Raspberry Pi 5 visual reconstruction using public manufacturer mechanical dimensions; original package envelopes and connector internals, no manufacturer CAD or artwork copied | MIT OR Apache-2.0 |
+| assets/render/selene/tools/export_views.py | SolidCraft contributors | original native MCP preview export tool for three reusable showcase views; changes only transient visibility and cameras and verifies the source master hash | MIT OR Apache-2.0 |
+| assets/render/selene/tools/finishes.py | SolidCraft contributors | original native physical-material proxy and opaque PBR assignment generator preserving the supplied rover palette | MIT OR Apache-2.0 |
+| assets/render/selene/tools/mechanisms.py | SolidCraft contributors | original native-command gripper sleeves, pads, wheel ownership, joint limits and inspection studies with independent analytic suspension relation | MIT OR Apache-2.0 |
+| assets/render/selene/tools/prepare.py | SolidCraft contributors | original Python development tool for bounded native-container inspection and reviewed opaque body-assignment preparation; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/selene/tools/presentation.py | SolidCraft contributors | original native-command browser organization, camera/render setups and closed sample-vial glass preparation | MIT OR Apache-2.0 |
+| assets/render/selene/tools/suspension.py | SolidCraft contributors | original native-command trailing-arm suspension, telescoping coilover loops, plain bushings, carrier gussets and local motion clearances derived from the admitted rover geometry; independent analytic pin-distance relation, no copied external CAD | MIT OR Apache-2.0 |
+| assets/render/selene/tools/validate_native.py | SolidCraft contributors | original bounded native MCP verification tool for sampled SELENE kinematics, independent analytic follower and world-coordinate checks, optional exact-name interference pairs and unchanged input hashes; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/selene/tools/validate_prepared.py | SolidCraft contributors | original Python development validator for prepared SELENE resources, source status, references, hashes and command projections; no application runtime dependency | MIT OR Apache-2.0 |
+| assets/render/selene/tools/yaw_supports.py | SolidCraft contributors | original native-command plain yaw journals, flanged brass thrust bushings, recessed axial retaining pins and mounting-head clearances derived from the admitted rover geometry; no copied external CAD | MIT OR Apache-2.0 |
+| assets/render/selene/ui/demo-flow.json | SolidCraft contributors | original progressive-disclosure UI integration specification for the existing Render workspace; no copied UI artwork or runtime registration | MIT OR Apache-2.0 |
+| docs/render-materials/baseline-setup-commands.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/capabilities.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/environment-presets.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/environments.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/lighting.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/lunar-physics-fixtures.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/materials.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/provenance.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/quality-presets.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/roadmap.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/scene-presets.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/selene-bindings.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/simulation-requirements.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/studio-presets.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/ui-integration.json | SolidCraft contributors | original English UI integration specification and exact source-revision mappings from SolidCraft's own implemented shell, UI kit and accepted icons; no copied artwork or runtime registration | MIT OR Apache-2.0 |
+| docs/render-materials/ux.json | SolidCraft contributors | original clean-room English catalog, preset or analytic planning data; external references documented in docs/render-materials/SOURCES.md; no external assets bundled | MIT OR Apache-2.0 |
+| docs/render-materials/validate_catalog.py | SolidCraft contributors | original Python development validator for catalog references, preset composition and analytic specification fixtures; no application runtime dependency | MIT OR Apache-2.0 |
+
+### Built-in render resource adapters (personal integration batch, 2026-10-22)
+
+The original adapters in `crates/engine/src/cmd/render/library.rs`, the generated lookup `library_data.rs` and its generator `tools/render-library/generate.py` project the already attributed starter and SELENE resources without replacing their bytes or authoring manifests. The added scalar texture channels, explicit color/V conventions and immutable-source/GPU-payload sharing are original contributor work under MIT OR Apache-2.0. No external code, commercial CAD data or new third-party imagery was imported. Source metadata and the original authoring attribution remain authoritative; pending runtime acceptance is not a photometric or engineering qualification.
+
+## Physical reference resource additions
+
+| File | Author | Source | Licence |
+|---|---|---|---|
+| assets/render/physical/bindings.json | SolidCraft contributors | original physical-reference curation, associations or derived schema-1 export; per-fact public sources retained without relicensing their publications | MIT OR Apache-2.0 |
+| assets/render/physical/exports/coverage.json | SolidCraft contributors | original physical-reference curation, associations or derived schema-1 export; per-fact public sources retained without relicensing their publications | MIT OR Apache-2.0 |
+| assets/render/physical/exports/native-cards.json | SolidCraft contributors | original physical-reference curation, associations or derived schema-1 export; per-fact public sources retained without relicensing their publications | MIT OR Apache-2.0 |
+| assets/render/physical/profiles.json | SolidCraft contributors | original physical-reference curation, associations or derived schema-1 export; per-fact public sources retained without relicensing their publications | MIT OR Apache-2.0 |
+| assets/render/physical/quantities.json | SolidCraft contributors | original physical-reference curation, associations or derived schema-1 export; per-fact public sources retained without relicensing their publications | MIT OR Apache-2.0 |
+| assets/render/physical/sources.json | SolidCraft contributors | original physical-reference curation, associations or derived schema-1 export; per-fact public sources retained without relicensing their publications | MIT OR Apache-2.0 |
+| assets/render/physical/tools/check_physical.py | SolidCraft contributors | original offline physical-reference validation and projection tool | MIT OR Apache-2.0 |
+| assets/render/physical/tools/physical.py | SolidCraft contributors | original offline physical-reference validation and projection tool | MIT OR Apache-2.0 |
+| assets/render/physical/tools/test_physical.py | SolidCraft contributors | original offline physical-reference validation and projection tool | MIT OR Apache-2.0 |
+| assets/render/physical/tools/export_library.py | SolidCraft contributors | original explicit reference-library planner and native no-loss export verifier; no external code | MIT OR Apache-2.0 |
+| assets/render/physical/tools/test_export_library.py | SolidCraft contributors | original regressions for native capability refusal, source identity and physical-card preservation | MIT OR Apache-2.0 |
+
+| tools/render-library/selene_studio.py | SolidCraft contributors | original bounded native MCP studio orchestration with pinned editable master, explicit GPU policy and request/export receipts; no generated model or image substitutes | MIT OR Apache-2.0 |
+
+| tools/render-library/selene_recipe.py | SolidCraft contributors | original full-detail SELENE material/light composition and analytic camera fit; unchanged pinned native master, no external imagery or measured optical dataset | MIT OR Apache-2.0 |
+| tools/render-library/test_selene_recipe.py | SolidCraft contributors | original independent projection, scaling, nonmutation and input-refusal fixtures for the SELENE studio recipe | MIT OR Apache-2.0 |
+
+| assets/render/selene/scenes/studio-hero.json | SolidCraft contributors | original executable render intent and verified provenance for the selected native SELENE studio showcase; authored RGB appearance and relative light units, not measured optics or simulation results | MIT OR Apache-2.0 |
+| tools/render-library/publish_selene.py | SolidCraft contributors | original bounded native-frame publication checks for explicit visual review, source identity, resource hashes, PNG CRCs and scanline limits; copies completed native bytes without image synthesis or resampling | MIT OR Apache-2.0 |
+| tools/render-library/test_publish_selene.py | SolidCraft contributors | original tiny analytic PNG fixtures for source-size, CRC, expansion, dimensions and explicit-publication-consent regressions | MIT OR Apache-2.0 |
+
+| tools/render-library/package_selene.py | SolidCraft contributors | original byte-preserving packaging of the reviewed native SELENE PNG, public provenance and checksums; bounded resource/PNG verification, no fonts, executables or new render execution | MIT OR Apache-2.0 |
+| .github/workflows/selene-showcase.yml | SolidCraft contributors | original read-only artifact-delivery workflow for the reviewed native SELENE export; existing pinned repository actions, no compilation, package installation, secret use or renderer claims | MIT OR Apache-2.0 |
+
+| tools/render-library/verify_linear_master.py | SolidCraft contributors | original independent validation driver for native linear EXR output using the official OpenEXR Python reader as an external test oracle; no codec implementation copied or production dependency added | MIT OR Apache-2.0 |
+
+## Aging, effects and backgrounds showcase, 2026-10-23
+
+| File | Author | Source | Licence |
+|---|---|---|---|
+| tools/render-showcase/instrument.py | SolidCraft contributors | original native-scene authoring, checksum-verified editorial assembly or bounded delivery tool; no third-party source or font binary copied | MIT OR Apache-2.0 |
+| tools/render-showcase/compose.py | SolidCraft contributors | original native-scene authoring, checksum-verified editorial assembly or bounded delivery tool; no third-party source or font binary copied | MIT OR Apache-2.0 |
+| tools/render-showcase/package.py | SolidCraft contributors | original native-scene authoring, checksum-verified editorial assembly or bounded delivery tool; no third-party source or font binary copied | MIT OR Apache-2.0 |
+
+| distribution/SolidCraft-Render-Showcase.zip | SolidCraft contributors and the explicitly credited original model/UI/resource authors | byte-verified selected collaborator package of reviewed native media, editable sample, recipes and public provenance; contained attribution and existing SELENE lettering notices retained; no fonts or executable binaries | MIT OR Apache-2.0 for new contributions; referenced original notices retained |
+| distribution/SolidCraft-Render-Showcase.json | SolidCraft contributors | original verified delivery archive manifest with exact SHA-256, member count and bounded scope | MIT OR Apache-2.0 |

CONTRIBUTING.md

@@ -186,8 +186,14 @@ no LTO, and debug assertions off (truck has debug-only assertions that reject va
 builds several times faster than `--release`. If a test fails only in a plain debug build, say so
 in the PR. `cargo xtask test` builds the tests with it and then runs every test binary at once
 (`cargo test` runs them one after another); arguments after `--` go to each binary, e.g.
-`cargo xtask test -- shell`. Tests run beside each other on a busy machine, so a test must not
-depend on wall-clock timing.
+`cargo xtask test -- shell`. Set `SOLIDCRAFT_TEST_JOBS` to a positive integer to opt into a
+shared bound on top-level test/side commands for `cargo xtask test` and `cargo xtask ci`.
+For example, `SOLIDCRAFT_TEST_JOBS=2` allows two commands at once; the sequential wasm/doc
+worker consumes one of those slots. Every binary and side check still runs after failures.
+Without the variable the existing concurrency is unchanged. `RUST_TEST_THREADS`,
+`ACTION_MATRIX_JOBS` and Cargo's build-job setting remain independent caller overrides;
+this limit does not choose their values or change test filters, timeouts or baselines.
+Tests run beside each other on a busy machine, so a test must not depend on wall-clock timing.
 
 **Ready pull requests test what they touch.** CI maps changed files to workspace packages and
 runs Clippy, the test build and tests for those and their dependents. The

Cargo.lock

@@ -590,9 +590,9 @@ checksum = "fc652a48c352aef3ea3aed32080501cf3ef6ed5da78602a020c991775b0aff04"
 
 [[package]]
 name = "cadmpeg-codec-freecad"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2a5257265c2549cf59a8457b3c7aadcc96c95abe20205232553766993a808812"
+checksum = "3c4a8fa61748cbb3ce80838b00a8cebfe553460583941f5aba6e2b97c16b4d37"
 dependencies = [
  "cadmpeg-container",
  "cadmpeg-core",
@@ -601,14 +601,14 @@ dependencies = [
  "serde",
  "serde_json",
  "tempfile",
- "zip 8.6.0",
+ "zip",
 ]
 
 [[package]]
 name = "cadmpeg-codec-rhino"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7d88b42fb91c7e5af4c75c0433029771f7e3233a0b72ec3d0b2e5ff2c72bed07"
+checksum = "d7af41440d4c1d69e88e612de02cc3c9bad79d03429531e640ac924fef53c6bf"
 dependencies = [
  "cadmpeg-container",
  "cadmpeg-core",
@@ -625,53 +625,53 @@ dependencies = [
 
 [[package]]
 name = "cadmpeg-codec-step"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e83a52258c129a683f77fb360ca30af54ae34339625ad890be12621128a5811c"
+checksum = "35e1b6d17cf26b31f59f2edab8ef5c29d2a33216c581fd913f012ad4869bd559"
 dependencies = [
  "base64",
  "cadmpeg-container",
  "cadmpeg-core",
  "cadmpeg-ir",
  "encoding_rs",
+ "serde",
  "serde_json",
  "thiserror 2.0.21",
- "zip 8.6.0",
+ "zip",
 ]
 
 [[package]]
 name = "cadmpeg-container"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c110508cd9155e905f52906de505dfd42dc70a0321f5e90b5f68c28ba207686e"
+checksum = "5ab7bcef48ac7480b4917820272d85cd2c9533e17904e15b0e4d22f19a6045bd"
 dependencies = [
  "cadmpeg-core",
  "crc32fast",
  "flate2",
- "zip 8.6.0",
- "zstd 0.14.2",
+ "zip",
 ]
 
 [[package]]
 name = "cadmpeg-core"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "21b1147e51a74e7c52da5b393a0344597238cdc622fac6443eb2fd526759f6fa"
+checksum = "e86bb7a40521832504bb1f5953a1c706b2c52aad73bf6d84e1b35e5cb0beae3f"
 dependencies = [
  "flate2",
  "memchr",
  "roxmltree",
+ "ruzstd",
  "serde",
  "serde_json",
  "thiserror 2.0.21",
- "zstd 0.14.2",
 ]
 
 [[package]]
 name = "cadmpeg-ir"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "71ff19f019f013d97e353bb802c5d2e253c2859aaa5422009aa933dc2f2e7dbc"
+checksum = "b570a1a8c579e407a9fd7bb10fa1900f8827f1d578b8fcb4ea2a056b5f323c72"
 dependencies = [
  "base64",
  "cadmpeg-core",
@@ -684,9 +684,9 @@ dependencies = [
 
 [[package]]
 name = "cadmpeg-registry"
-version = "0.6.1"
+version = "0.6.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "66046f1a694926707bea8944f861e699964b04c68972708588f97e14ccee3c5d"
+checksum = "b2be23469a9bca0b684f1811118fffb581ebd32ded08e6cc8b0716a41f8c1377"
 dependencies = [
  "cadmpeg-codec-freecad",
  "cadmpeg-codec-rhino",
@@ -996,6 +996,15 @@ dependencies = [
  "cfg-if",
 ]
 
+[[package]]
+name = "crossbeam-channel"
+version = "0.5.17"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "98b0cc327b5bc766e7fda9c9260cc0fa81b43a8e240440422dff70788e3f9ef1"
+dependencies = [
+ "crossbeam-utils",
+]
+
 [[package]]
 name = "crossbeam-deque"
 version = "0.8.8"
@@ -2271,6 +2280,16 @@ dependencies = [
  "syn 2.0.119",
 ]
 
+[[package]]
+name = "keyboard-types"
+version = "0.8.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0fbe853b403ae61a04233030ae8a79d94975281ed9770a1f9e246732b534b28d"
+dependencies = [
+ "bitflags 2.13.2",
+ "serde",
+]
+
 [[package]]
 name = "keyring"
 version = "3.6.3"
@@ -2480,6 +2499,24 @@ dependencies = [
  "pxfm",
 ]
 
+[[package]]
+name = "muda"
+version = "0.21.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "4340e89c178916e62879c5c36b7f699019369be413e496178a6983ce91b8bc03"
+dependencies = [
+ "crossbeam-channel",
+ "dpi",
+ "keyboard-types",
+ "objc2 0.6.5",
+ "objc2-app-kit 0.3.2",
+ "objc2-core-foundation",
+ "objc2-foundation 0.3.2",
+ "png",
+ "thiserror 2.0.21",
+ "windows-sys 0.61.2",
+]
+
 [[package]]
 name = "multiversion_no_op"
 version = "1.0.0"
@@ -3749,6 +3786,15 @@ version = "1.0.23"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "cf54715a573b99ac80df0bc206da022bcd442c974952c7b9720069370852e21f"
 
+[[package]]
+name = "ruzstd"
+version = "0.9.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "69e4ce4a039f42bf25920b95667e4d789e98749ab11bbb8d2c2936f788421bb5"
+dependencies = [
+ "twox-hash",
+]
+
 [[package]]
 name = "same-file"
 version = "1.0.6"
@@ -4162,7 +4208,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "block2 0.6.2",
  "eframe",
@@ -4172,6 +4218,7 @@ dependencies = [
  "hidapi",
  "keyring",
  "log",
+ "muda",
  "objc2 0.6.5",
  "objc2-app-kit 0.3.2",
  "objc2-foundation 0.3.2",
@@ -4193,11 +4240,11 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-3dx-client"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 
 [[package]]
 name = "solidcraft-cli"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "image",
  "log",
@@ -4209,7 +4256,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-derive"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -4218,7 +4265,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-doc"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "log",
  "serde",
@@ -4235,7 +4282,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-engine"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "log",
  "schemars",
@@ -4254,7 +4301,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-geom"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "serde",
  "serde_json",
@@ -4263,15 +4310,18 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-gpu"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
+ "image",
  "log",
  "naga",
  "pollster 0.4.0",
+ "robust",
  "serde",
  "serde_json",
  "solidcraft-engine",
  "solidcraft-geom",
+ "solidcraft-io",
  "solidcraft-kernel",
  "solidcraft-render",
  "thiserror 2.0.21",
@@ -4280,7 +4330,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-io"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "cadmpeg-core",
  "cadmpeg-ir",
@@ -4298,12 +4348,12 @@ dependencies = [
  "solidcraft-geom",
  "solidcraft-kernel",
  "thiserror 2.0.21",
- "zip 9.0.4",
+ "zip",
 ]
 
 [[package]]
 name = "solidcraft-kernel"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "log",
  "proptest",
@@ -4323,7 +4373,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-mcp"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "serde_json",
  "solidcraft-engine",
@@ -4332,7 +4382,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-render"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "image",
  "moxcms",
@@ -4346,7 +4396,7 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-sketch"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "serde",
  "serde_json",
@@ -4357,14 +4407,14 @@ dependencies = [
 
 [[package]]
 name = "solidcraft-space-mouse"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "serde",
 ]
 
 [[package]]
 name = "solidcraft-ui-egui"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "arboard",
  "egui",
@@ -4372,6 +4422,7 @@ dependencies = [
  "image",
  "log",
  "minisign-verify",
+ "nix 0.31.3",
  "pollster 0.4.0",
  "proc-macro2",
  "semver",
@@ -4387,12 +4438,12 @@ dependencies = [
  "ttf-parser",
  "web-time",
  "winreg",
- "zip 9.0.4",
+ "zip",
 ]
 
 [[package]]
 name = "solidcraft-web"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "eframe",
  "egui",
@@ -4841,6 +4892,12 @@ version = "0.25.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "d2df906b07856748fa3f6e0ad0cbaa047052d4a7dd609e231c4f72cee8c36f31"
 
+[[package]]
+name = "twox-hash"
+version = "2.1.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "86a801b3cea342a06d468c8710662aa29e5e05e4f5c0d62f00bbb7f2ad7941c2"
+
 [[package]]
 name = "type-map"
 version = "0.5.1"
@@ -5922,7 +5979,7 @@ checksum = "e450f9b2ed1dff33c94c12589a87338689467b9c4f5d8a5710bd09a847d2c8a7"
 
 [[package]]
 name = "xtask"
-version = "0.21.0-rc.1"
+version = "0.22.0"
 dependencies = [
  "proc-macro2",
  "serde_json",
@@ -6215,20 +6272,6 @@ dependencies = [
  "syn 3.0.6",
 ]
 
-[[package]]
-name = "zip"
-version = "8.6.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2d04a6b5381502aa6087c94c669499eb1602eb9c5e8198e534de571f7154809b"
-dependencies = [
- "crc32fast",
- "flate2",
- "indexmap",
- "memchr",
- "typed-path",
- "zstd 0.13.3",
-]
-
 [[package]]
 name = "zip"
 version = "9.0.4"
@@ -6268,52 +6311,6 @@ dependencies = [
  "simd-adler32",
 ]
 
-[[package]]
-name = "zstd"
-version = "0.13.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e91ee311a569c327171651566e07972200e76fcfe2242a4fa446149a3881c08a"
-dependencies = [
- "zstd-safe 7.3.0",
-]
-
-[[package]]
-name = "zstd"
-version = "0.14.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "057cfd910cfac363a0ada849592624b4c9ff2e10bef504c3433810d78ed96f93"
-dependencies = [
- "zstd-safe 8.1.0",
-]
-
-[[package]]
-name = "zstd-safe"
-version = "7.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "64d80649ab6db9d9f6f9c80a40becd948eda4714a0a5ac8c4d157a32231c7882"
-dependencies = [
- "zstd-sys",
-]
-
-[[package]]
-name = "zstd-safe"
-version = "8.1.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bdd44c6a7284e91f3717755b24315a302edd9153a01f753c3cba3d765e8eafac"
-dependencies = [
- "zstd-sys",
-]
-
-[[package]]
-name = "zstd-sys"
-version = "2.1.1+zstd.1.5.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "aeec9eaf2dffbbd09201e23bd0ffcbaa33bb8e9266a10734fd7ed90a85eca078"
-dependencies = [
- "cc",
- "pkg-config",
-]
-
 [[package]]
 name = "zune-core"
 version = "0.5.3"

Cargo.toml

@@ -5,7 +5,7 @@ members = ["crates/*", "apps/*", "xtask"]
 exclude = ["vendor"]
 
 [workspace.package]
-version = "0.21.0-rc.1"
+version = "0.22.0"
 edition = "2024"
 license = "MIT OR Apache-2.0"
 rust-version = "1.95"
@@ -13,6 +13,7 @@ authors = ["SolidCraft contributors"]
 repository = "https://github.com/bherbruck/solidcraft"
 
 [workspace.dependencies]
+robust = "1.2"
 # internal
 solidcraft-geom = { path = "crates/geom" }
 solidcraft-sketch = { path = "crates/sketch" }
@@ -67,17 +68,20 @@ encoding_rs = "0.8"
 # read by crates/io itself, so no image decoding or file access comes with it.
 gltf = { version = "1.4", default-features = false, features = ["names"] }
 
-# FreeCAD and Rhino import (Apache-2.0, pure Rust apart from zstd; native builds only).
+# FreeCAD and Rhino import (Apache-2.0, pure Rust; native and browser builds).
 # Pinned: its IR and codec APIs change between minor versions. Open formats only: no default
 # features, so cadmpeg's codecs for commercial formats (f3d, sldprt, inventor, catia, creo, nx)
 # and its ShapeManager/ACIS `sat` codec are not compiled in. `step` is the writer we restate through.
-cadmpeg-core = "=0.6.1"
-cadmpeg-ir = "=0.6.1"
-cadmpeg-registry = { version = "=0.6.1", default-features = false, features = ["fcstd", "rhino", "step"] }
+cadmpeg-core = "=0.6.3"
+cadmpeg-ir = "=0.6.3"
+cadmpeg-registry = { version = "=0.6.3", default-features = false, features = ["fcstd", "rhino", "step"] }
 
 # fonts (sketch text outlines; MIT OR Apache-2.0, pure Rust)
 ttf-parser = { version = "0.25", default-features = false, features = ["std"] }
 
+# Ends a process group with the system call (MIT; already in the tree through zip).
+nix = { version = "0.31", default-features = false, features = ["signal"] }
+
 # images
 image = { version = "0.25", default-features = false, features = ["png", "hdr"] }
 png = "0.18.1"

ROADMAP.md

@@ -51,24 +51,28 @@ PCB / Package, Render, Animation, Simulation, Manufacture/CAM, Drawings.
 |---|---|---|---|
 | M0 | Vertical slice | done | — |
 | M1 | Sketch depth: command coverage implemented — projection/intersect/include as linked geometry (auto-project on faces, lost-reference warnings, break link), full SKETCH create/modify set (slots, polygons, tangent arcs/circles, ellipse, fit/control splines, conic, text, trim/extend/break, fillet/chamfer, offset, mirror, patterns, move/scale, blend curve, centerline), constraints incl. curvature and polygon with over-constraint refusal, Shift-picked line midpoints in Horizontal/Vertical using persisted points and ordinary constraints (#2087), driven/arc-length/linear-diameter dimensions, AutoConstrain, DXF/SVG insert, 3D sketch curves (Project To Surface, Intersection Curve, Isoparametric Curve, Spun Profile), exact free-form profiles (B-spline/NURBS edges, any spline degree, curves cut by crossings), sweeps and pipes along 3D sketch curves, canvases and decals, curvature combs. Exact free-form Extend and certified associative offsets now preserve geometry and IDs through edits, deletion and reopen. Occurrence-frame 3D wires now store explicit coordinate spaces and retain points and analytic fits through moves, refresh, undo and reopen. Constructive sketch solving (Owen 1991, Fudos & Hoffmann 1997) ahead of the numerical solver: points and rigid clusters are placed on the branch the sketch had, so dimension edits and drags keep their solution; edits that would turn a sketch over are refused; drags re-solve only the sketch per frame. Remaining workflow repairs: mixed offset junctions, legacy natural-spline seams, and damaged legacy wire links lacking frame provenance | in progress | 4 |
-| M2 | Robust modelling: coplanar booleans in the kernel, holes (placed on faces and on sketch points), threads (cosmetic, then modelled), patterns, mirror, shell, draft, split, construction geometry | in progress | 16 |
+| M2 | Robust modelling: coplanar booleans in the kernel, holes (placed on faces, at distances from reference edges, and on sketch points), threads (cosmetic, then modelled), patterns, mirror, shell, draft, split, construction geometry | in progress | 16 |
 | M3 | General fillets and chamfers (curved edges, chains, vertex blends); saddle rolling-ball surfaces now use continuous seam sections and arc-length fitting with shared contact boundaries and bounded accuracy checks; tiny rim edges remain selected instead of nearby wall seams when filleting (#2498) | in progress | 30 |
-| M4 | Files: STEP import (done — [docs/step-import.md](docs/step-import.md)), FreeCAD/Rhino solids through cadmpeg (done, desktop and CLI), 3MF export and 3MF/STL import as mesh bodies (done), 3MF with B-rep face tags ([docs/formats/3mf-face-tags.md](docs/formats/3mf-face-tags.md), done), constant-section parametric mesh reconstruction, DXF sketches, OBJ import | in progress | 6 |
+| M4 | Files: STEP import (done — [docs/step-import.md](docs/step-import.md)), FreeCAD/Rhino solids through cadmpeg (done, desktop, browser and CLI), 3MF export and 3MF/STL import as mesh bodies (done), 3MF with B-rep face tags ([docs/formats/3mf-face-tags.md](docs/formats/3mf-face-tags.md), done), constant-section parametric mesh reconstruction, DXF sketches, OBJ import | in progress | 6 |
 | M5 | Persistent naming of faces and edges (docs/book/src/dev/naming.md): faces named from their exact kernel-reported history (sketch curve sides, caps, revolve sections, primitive sides, blends, shell inner walls, pattern/mirror copies; split pieces told apart by the faces around them, lumps of a cut body named after their faces), edges by their faces; fillets/chamfers, sketches on faces, shell/draft/offset/replace faces, hole placements, joint origins and face appearances resolve by name first and warn when the entity split or vanished: done. sheet metal edges by base sketch line and flange side, shell inner faces, sweep and loft roles: done. kernel-reported face history: done (merged faces answer to every name; operations without history yet fall back to geometric names, flagged unverified; format 14 keeps older designs' geometric names). Left: history through sheet metal, plastic, surface and emboss features; FaceSource certificates through history | in progress | 20 |
-| M6 | UI depth: selection feedback and origin (done), timeline editing (done: hover and selection highlight modifier faces, including fillets and chamfers; edit feature, history marker drag, dependency-checked single and multi-item reorder, suppress, rename, delete with dependents, re-resolved references; redefining selections refreshes persistent edge/face references while retaining feature identity and dimension names; responsive feature history with width-driven icons/names/title, snapping width resize, bottom/left/browser-stack docking, shared-column collapse, rollback bar, multi-selection and persistent folders), right-docked dialogs (done), live previews for every feature dialog (done), keyboard-first commands with on-canvas value boxes and sketch inline dimensions (done), drag manipulators with automatic join/cut (done: extrude incl. two sides, fillet, shell, hole depth, move, pattern spacing, revolve rotator, extrude taper), dark theme (done), right-click menu with Repeat (done), measure tool (done), section analysis (done), selection filter (done), drag-solve of sketch points (done); appearance controls now preserve body/face/component targeting, named transparent looks, reuse/search and override removal; preferences | in progress | 6 |
+| M6 | UI depth: selection feedback and origin (done), timeline editing (done: hover and selection highlight modifier faces, including fillets and chamfers; edit feature, history marker drag, dependency-checked single and multi-item reorder, suppress, rename, delete with dependents, re-resolved references; redefining selections refreshes persistent edge/face references while retaining feature identity and dimension names; responsive feature history with width-driven icons/names/title, snapping width resize, bottom/left/browser-stack docking, shared-column collapse, rollback bar, multi-selection and persistent folders), right-docked dialogs (done), live previews for every feature dialog (done), keyboard-first commands with on-canvas value boxes and sketch inline dimensions (done), drag manipulators with automatic join/cut (done: extrude incl. two sides, fillet, shell, hole depth, move, pattern spacing, revolve rotator, extrude taper), dark theme (done), right-click menu with Repeat (done), measure tool (done), section analysis (done), selection filter (done), drag-solve of sketch points (done); appearance controls now preserve body/face/component targeting, named transparent looks, reuse/search and override removal; Browser Expand All / Collapse All (`browser.expand_all`, `browser.collapse_all`) on the design and component menus; preferences | in progress | 6 |
 | M7 | Thin extrude (walls along open or closed curves: centre, inside, outside or two sides; mitred corners, crossing walls joined; #721), sweep, loft (incl. to a point), rib and web (to next / depth), emboss (planar faces and exact radial emboss/deboss of bounded orthogonal profiles on complete exterior cylinders/sleeves), thread (cosmetic, and modelled M3–M20 outside and inside: the ISO profile screwed in as a faceted cut), coil (smooth B-spline helical walls), pipe, pattern on path, patterns of bodies and components, replace face (parallel), align, remove, feature copy/paste: done. Unique eligible cylindrical targets are inferred for new Emboss features. Left: general curved-face emboss and exact (unfaceted) modelled threads | in progress | 12 |
 | M8 | Surface workspace (#772). Done: Patch (sketch regions; edge loops filled G0, plus `crown`), Stitch, Thicken (planes and cylinders), Extend (straight edges of planar surfaces), Trim (by a plane, a face or sketch curves swept onto the surface, keeping a side or the picked regions; mutual trim of two surfaces, extended to meet and stitched, #767), Delete Face (healing), Boundary Fill, zebra/draft/curvature-map analysis, Surface Extrude/Revolve/Sweep/Loft from open and closed curves, Offset, Unstitch and Reverse Normal; the continuity-driven core (`kernel/src/bridge.rs`, G0–G3 Hermite rows) with **Blend** (`surface.blend`, #764: edge chains along one or several faces, closed rims paired seam to seam or from picked seams, a dialog), **Match** (`surface.match`), **Boundary** (`surface.boundary`, #763 — two sketch curves exact with G0–G3, three or four as the flat patch of their loop, and curve networks: Coons and Gordon surfaces through sketch, 3D-sketch or edge curves, a point for a three-sided side, G1/G2 against the faces along one direction's edges, joined into their body on request; G1/G2 on two sides that meet at a corner waits for the Gregory-type corner), **Fair** (`surface.fair`, CV fairing), **continuity analysis** (`inspect.continuity`, #770; a toolbar tool with edge markers and a legend, and curvature combs along face isocurves) and a multi-section **loft** with per-end continuity and crown, and guide rails on solid and surface lofts (one or two, scaling or stretching the sections between; #201). Also in the Class-A pass: G1…G4 blend curves in the sketch, chord and variable-radius fillets on curved edges (with honest refusals where the fit cannot hold), and a G2 corner patch where filleted edges meet (kernel; the command refuses until the patch's sections can be sewn to the blends' contacts). Left: bias/form-factor fillet sections (design recorded), a Gregory-type corner, surface Fillet between separate surface bodies (#769), Ruled (#762), Untrim (#761), curved-face Extend (#760), and every remaining #757–#772 item | deferred | — |
-| M9 | Components and assemblies: New Component / Create Components from Bodies, active component, per-component origin/bodies/sketches/timeline entries, occurrences with transforms, Copy/Paste vs Paste New, nested Browser tree with visibility and isolate; Ground, Move/Copy of occurrences, joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) by joint origins with limits and Drive Joints, closed kinematic loops (four-bar, slider-crank: the loop's other joints follow the driven one on its branch, and driving stops where a loop can no longer close), cams (`joint.cam`: a revolute cam drives a slider or revolute follower along a closed sketch profile or the cam's edges, knife, roller or flat followers, worked out again when the profile changes; drives, studies, closed loops, contact sets), As-built Joint, Rigid Group, Contact Sets (driving and motion studies stop where bodies in a set would pass through each other), Motion Study (joint values keyed along a timeline, playback, export of occurrence positions as JSON/CSV), motion analysis (joint values and a point's path charted over a study as value, velocity and acceleration; the parts that collide along a study, with the steps where they do), Exploded views (automatic or by hand, shown without changing placements); interference, per-component physical properties; STEP with assembly structure; URDF export for robot simulators (links with meshes, mass and inertia; joint chains whose values match Drive Joints; docs/urdf.md). Physical properties now measure material-aware component/occurrence placements, descendants and repeated instances, including pending moves and body reassignment offsets; contact geometry and automatic exploded centres respect those offsets. Groundwork done: component tree, occurrences with transforms (instances, Paste New), world placement, active component as authoring frame, ground, Capture/Revert Position, moving bodies and sketches. UI: ASSEMBLE panel dialogs for New Component, Joint (snaps on faces, edges, circles and vertices; animated motion preview; offsets, flip, limits), As-built Joint, Joint Origin, Rigid Group, Drive Joints (live slider), Motion Link, Cam and Interference (overlaps shown red); joints in the timeline and the Browser | in progress | 32 |
+| M9 | Components and assemblies: New Component / Create Components from Bodies, active component, per-component origin/bodies/sketches/timeline entries, occurrences with transforms, Copy/Paste vs Paste New, nested Browser tree with visibility and isolate; Ground, Move/Copy of occurrences, joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) by joint origins with limits and Drive Joints, closed kinematic loops (four-bar, slider-crank: the loop's other joints follow the driven one on its branch, and driving stops where a loop can no longer close), cams (`joint.cam`: a revolute cam drives a slider or revolute follower along a closed sketch profile or the cam's edges, knife, roller or flat followers, worked out again when the profile changes; drives, studies, closed loops, contact sets), As-built Joint, Rigid Group, Contact Sets (driving and motion studies stop where bodies in a set would pass through each other), Motion Study (joint values keyed along a timeline, playback, export of occurrence positions as JSON/CSV), motion analysis (joint values and a point's path charted over a study as value, velocity and acceleration; the parts that collide along a study, with the steps where they do), Exploded views (automatic or by hand, shown without changing placements, and exported as an animation coming apart and back together); interference, per-component physical properties; STEP with assembly structure; URDF export for robot simulators (links with meshes, mass and inertia; joint chains whose values match Drive Joints; docs/urdf.md). Physical properties now measure material-aware component/occurrence placements, descendants and repeated instances, including pending moves and body reassignment offsets; contact geometry and automatic exploded centres respect those offsets. Groundwork done: component tree, occurrences with transforms (instances, Paste New), world placement, active component as authoring frame, ground, Capture/Revert Position, moving bodies and sketches. UI: ASSEMBLE panel dialogs for New Component, Joint (snaps on faces, edges, circles and vertices; animated motion preview; offsets, flip, limits), As-built Joint, Joint Origin, Rigid Group, Drive Joints (live slider), Motion Link, Cam and Interference (overlaps shown red); joints in the timeline and the Browser | in progress | 32 |
 | M10 | Sheet metal: flange (base, edge, contour), hem, unfold/refold, convert, flat pattern + DXF, rules: done. PLASTIC enclosure subset: Boss, Rib, Web, Lip/Groove, Snap Fit, Rest, Plastic Rules (library, edit, assign; rule draft and clearance as feature defaults): done, tested against hand-computed geometry. UI: SHEET METAL and PLASTIC tabs with dialogs (live preview, Edit Feature, pre-selection) for Flange, Hem, Unfold/Refold, Convert, Sheet Metal Rules, Create Flat Pattern (flat view with bend lines, bend table CSV/JSON and DXF export with exact circle/arc/line cutouts), Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Fold (bend along a sketch line); flanges meeting at a corner closed at any angle with the rule's gap; edge flanges with their own angle and height per edge in one feature; corner reliefs (notch, round, rectangular, tear) chosen by the rule; Convert to Sheet Metal from a solid or shelled body by its bend edges (flat faces, sharp bends) | in progress | 36 |
 | M11 | 2D drawings | deferred | — |
 | M12 | Release: cross-platform packages, verification and deliberate publication implemented; original current-UI demo refreshed. Trusted distribution signing and broader performance work remain | in progress | 16 |
 | M14 | Configurations: a table of rows (parameter expressions and feature suppressions per row) switched with config.activate (undoable, all or nothing), kept through parameter renames and feature deletes (config.configure, config.table, config.column/row/activate). Per-row body materials and appearances (library looks, custom colour/opacity and clearing overrides), undoable activation and save/reopen: done. Ordered typed configuration rules, atomic validation and structured rule editing: done. Component appearance and certified semantic face style columns, atomic preview/apply and independent-copy remapping: done. Exact constructed sketch-side and immutable imported-face lineage now preserve legacy names and reject retargeting. Left: ambiguous shifted/two-sided caps | in progress | 4 |
 | M13 | Never lose work: atomic saves (temporary file, flush, rename; a crash at any moment leaves the old file or the new one) with the replaced version kept as `<file>.bak`; autosave of unsaved changes to the recovery folder every 5 minutes (preference) and after big operations, only when something changed; "Recover unsaved design?" on the next launch (`doc.recovery_list`, `doc.recover`, `doc.recovery_discard`); a kill-mid-save test (process killed while saving a 0.5 MB design 25 times). File format: `"format": "solidcraft/12"`, older formats upgraded step by step (`doc::format`), newer ones refused with a message, out-of-range numbers and broken placements refused; a corpus of designs saved by M0, components-era, joints-era and current builds (apps/solidcraft-cli/tests/corpus) that must open and evaluate as saved; damaged and hostile variants (truncation, bit flips, hostile values, removed keys, repeated features, deep nesting) never panic | done | 6 |
+| M15 | Frames and weldments (#4003): structural members along 2D and 3D sketch lines, butt and mitre corners, trim to faces and bodies, end caps, gussets, cosmetic welds and a cut list. Done: the profile library (`frame.profile.list`, `frame.profile.properties`, `frame.profile.insert`): bar, round bar, rectangular and round tube, angle, channel and I-beam, each SolidCraft's own parametric definition with exact fillet arcs and exact section properties (area, centroid, second moments), tested against hand-computed values; members (`frame.member`): one body per straight line of a 2D or 3D frame sketch, following parameter edits, with a built-in profile (its dimensions parameter expressions) or a profile sketch (its drawn material by alternating nested loops), anchor, angle and mirror; each member's name kept with its line. Left: corners, trims, end caps, gussets, welds, cut list, FRAME tab and dialogs | in progress | 60 |
 
 M6 navigation preferences include **Touchpad**: Shift + pointer movement pans, Alt/Option +
 pointer movement orbits without a mouse button, and vertical scrolling zooms. Other presets
 retain their saved two-finger scroll preference; camera motion is available through
 `view.navigate` and modifier-aware `ui.move` automation.
+With the **Fusion** preset and two-finger pan enabled, two fingers pan and Shift + two fingers
+orbit freely, with pinch zoom and mouse bindings unchanged. The shared navigation handler
+applies the same gestures to model and Render views and blocks orbit on flat pages.
 
 UI redesign (#2016): the File/start view (#2027) uses shared light/dark navigation,
 action tiles, recent rows and sample cards, with recovery review and Save As/Export
@@ -139,6 +143,12 @@ completed drawings publish atomically. The browser still exports synchronously.
 
 ## Render foundation
 
+- Original starter appearances (#1722): 34 opaque recipes through existing commands, with six explicitly unavailable glass recipes and preserved legacy looks; see [the contract](docs/render-starter-appearances.md).
+
+- Bounded linear film accumulation (#1696) supplies caller-admitted mean/variance storage and complete-pass views; actual progressive consumers remain separate. See [the film contract](docs/render-film.md).
+
+- Definition-local visual mapping (#1214) supplies a bounded numerical frame, physical repeat coordinates and a deterministic one-time grain-axis suggestion. It adds no saved record or texture consumer; see [the mapping contract](docs/render-visual-mapping.md).
+
 - Explicit texture normalization (#1218) produces completed float RGBA with
   role-aware linear color/data semantics, bounded matrix/TRC ICC conversion and
   opt-in EXIF orientation. It retains high-precision raw samples and records lossy
@@ -583,6 +593,10 @@ completed drawings publish atomically. The browser still exports synchronously.
   continuous collision detection; local thin walls and small details remain limitations.
   See [contact-set limits and recovery](docs/contact-sets.md).
 
+## Assembly dragging
+
+The design's first part is grounded when it is made, and a left-button drag repositions a free part (`occurrence.drag`: one undo step, exact occurrence paths including repeated jointed definitions, any floating-chain member carries the chain, grounded parts and joints hold where present, Escape cancels).
+
 ## 3D sketch bridges
 
 3D sketch drawing snaps to points on other visible sketch planes without flattening them onto

THIRD-PARTY-LICENSES.txt

@@ -1,6 +1,6 @@
 Third-party software in SolidCraft
 
-SolidCraft (the desktop app, solidcraft-cli and the web app) is built from the 560 crates below.
+SolidCraft (the desktop app, solidcraft-cli and the web app) is built from the 559 crates below.
 Generated by `cargo xtask licences` from Cargo.lock and the crates' own licence files.
 SolidCraft's own licence is in LICENSE-MIT and LICENSE-APACHE, and NOTICE.
 
@@ -60,13 +60,13 @@ bytemuck_derive 1.12.1  (Zlib OR Apache-2.0 OR MIT)
 byteorder 1.5.0  (Unlicense OR MIT)
 byteorder-lite 0.1.0  (Unlicense OR MIT)
 bytes 1.12.1  (MIT)
-cadmpeg-codec-freecad 0.6.1  (Apache-2.0)
-cadmpeg-codec-rhino 0.6.1  (Apache-2.0)
-cadmpeg-codec-step 0.6.1  (Apache-2.0)
-cadmpeg-container 0.6.1  (Apache-2.0)
-cadmpeg-core 0.6.1  (Apache-2.0)
-cadmpeg-ir 0.6.1  (Apache-2.0)
-cadmpeg-registry 0.6.1  (Apache-2.0)
+cadmpeg-codec-freecad 0.6.3  (Apache-2.0)
+cadmpeg-codec-rhino 0.6.3  (Apache-2.0)
+cadmpeg-codec-step 0.6.3  (Apache-2.0)
+cadmpeg-container 0.6.3  (Apache-2.0)
+cadmpeg-core 0.6.3  (Apache-2.0)
+cadmpeg-ir 0.6.3  (Apache-2.0)
+cadmpeg-registry 0.6.3  (Apache-2.0)
 calloop 0.13.0  (MIT)
 calloop 0.14.5  (MIT)
 calloop-wayland-source 0.3.0  (MIT)
@@ -95,6 +95,7 @@ core_detect 1.0.0  (MIT/Apache-2.0)
 cpufeatures 0.2.17  (MIT OR Apache-2.0)
 cpufeatures 0.3.1  (MIT OR Apache-2.0)
 crc32fast 1.5.2  (MIT OR Apache-2.0)
+crossbeam-channel 0.5.17  (MIT OR Apache-2.0)
 crossbeam-deque 0.8.8  (MIT OR Apache-2.0)
 crossbeam-epoch 0.9.21  (MIT OR Apache-2.0)
 crossbeam-utils 0.8.23  (MIT OR Apache-2.0)
@@ -210,6 +211,7 @@ jni-sys 0.4.1  (MIT OR Apache-2.0)
 jni-sys-macros 0.4.1  (MIT OR Apache-2.0)
 js-sys 0.3.106  (MIT OR Apache-2.0)
 katexit 0.1.5  (MIT OR Apache-2.0)
+keyboard-types 0.8.3  (MIT OR Apache-2.0)
 keyring 3.6.3  (MIT OR Apache-2.0)
 khronos-egl 6.0.0  (MIT/Apache-2.0)
 kurbo 0.13.1  (Apache-2.0 OR MIT)
@@ -234,6 +236,7 @@ minisign-verify 0.3.0  (MIT)
 miniz_oxide 0.8.9  (MIT OR Zlib OR Apache-2.0)
 miniz_oxide 0.9.1  (MIT OR Zlib OR Apache-2.0)
 moxcms 0.8.1  (BSD-3-Clause OR Apache-2.0)
+muda 0.21.2  (Apache-2.0 OR MIT)
 multiversion_no_op 1.0.0  (Apache-2.0 OR MIT)
 naga 30.0.1  (MIT OR Apache-2.0)
 naga-types 30.0.1  (MIT OR Apache-2.0)
@@ -352,6 +355,7 @@ rustls-platform-verifier 0.7.1  (MIT OR Apache-2.0)
 rustls-platform-verifier-android 0.2.0  (MIT OR Apache-2.0)
 rustls-webpki 0.103.15  (ISC)
 rustversion 1.0.23  (MIT OR Apache-2.0)
+ruzstd 0.9.1  (MIT)
 schannel 0.1.29  (MIT)
 schemars 1.2.3  (MIT)
 schemars_derive 1.2.3  (MIT)
@@ -429,6 +433,7 @@ truck-shapeops 0.4.0  (Apache-2.0)
 truck-stepio 0.3.0  (Apache-2.0)
 truck-topology 0.6.0  (Apache-2.0)
 ttf-parser 0.25.1  (MIT OR Apache-2.0)
+twox-hash 2.1.5  (MIT)
 type-map 0.5.1  (MIT/Apache-2.0)
 typed-path 0.12.3  (MIT OR Apache-2.0)
 typeid 1.0.3  (MIT OR Apache-2.0)
@@ -546,16 +551,10 @@ zeroize_derive 1.5.0  (Apache-2.0 OR MIT)
 zerotrie 0.2.5  (Unicode-3.0)
 zerovec 0.11.8  (Unicode-3.0)
 zerovec-derive 0.11.6  (Unicode-3.0)
-zip 8.6.0  (MIT)
 zip 9.0.4  (MIT)
 zlib-rs 0.6.8  (Zlib)
 zmij 1.0.23  (MIT)
 zopfli 0.8.3  (Apache-2.0)
-zstd 0.13.3  (MIT)
-zstd 0.14.2  (BSD-3-Clause)
-zstd-safe 7.3.0  (BSD-3-Clause)
-zstd-safe 8.1.0  (BSD-3-Clause)
-zstd-sys 2.1.1+zstd.1.5.7  (BSD-3-Clause)
 zune-core 0.5.3  (MIT OR Apache-2.0 OR Zlib)
 zune-jpeg 0.5.15  (MIT OR Apache-2.0 OR Zlib)
 zvariant 4.2.0  (MIT)
@@ -1108,26 +1107,27 @@ ahash 0.8.12, arrayvec 0.7.8, async-channel 2.5.0, async-executor 1.14.0, async-
 4.7.1, atomic-waker 1.1.2, base64 0.23.1, bitflags 1.3.2, bitflags 2.13.2, blocking 1.7.0, bumpalo
 3.20.3, cfg-if 1.0.5, cgl 0.3.2, concurrent-queue 2.5.0, core-foundation 0.10.1, core-foundation
 0.9.4, core-foundation-sys 0.8.7, core-graphics 0.23.2, core-graphics-types 0.1.3, core_detect
-1.0.0, crossbeam-deque 0.8.8, crossbeam-epoch 0.9.21, crossbeam-utils 0.8.23, dbus-secret-service
-4.1.0, displaydoc 0.2.7, either 1.19.0, equivalent 1.0.2, errno 0.3.14, euclid 0.22.14,
-event-listener 5.4.2, event-listener-strategy 0.5.4, fastrand 2.5.0, flate2 1.1.10, form_urlencoded
-1.2.2, futures-lite 2.6.1, gethostname 1.1.0, gif 0.14.2, glow 0.17.0, gltf 1.4.1, gltf-derive
-1.4.1, gltf-json 1.4.1, hashbrown 0.16.1, hashbrown 0.17.1, hermit-abi 0.5.3, httparse 1.10.1, idna
-1.1.0, idna_adapter 1.2.2, indexmap 2.14.2, itertools 0.13.0, itertools 0.15.0, js-sys 0.3.106,
-khronos-egl 6.0.0, lazy_static 1.5.1, linux-raw-sys 0.12.1, linux-raw-sys 0.4.15, lock_api 0.4.14,
-log 0.4.34, num 0.4.3, num-bigint 0.4.8, num-complex 0.4.6, num-integer 0.1.47, num-iter 0.1.46,
-num-rational 0.4.2, num-traits 0.2.19, once_cell 1.21.4, openssl-probe 0.2.1, ordered-stream 0.2.0,
-parking 2.2.1, parking_lot 0.12.5, parking_lot_core 0.9.12, percent-encoding 2.3.2, piper 0.2.5,
-plain 0.2.3, png 0.18.1, polling 3.11.0, pollster 0.4.0, pollster 1.0.1, rayon 1.12.0, rayon-core
-1.13.0, renderdoc-sys 1.1.0, robust 1.2.0, ron 0.12.2, roxmltree 0.21.1, rustc-hash 1.1.0, rustix
-0.38.44, rustix 1.1.5, rustls 0.23.46, rustls-native-certs 0.8.5, scoped-tls 1.0.1, scopeguard
-1.2.0, secret-service 4.0.0, security-framework 2.11.1, security-framework 3.7.0,
-security-framework-sys 2.17.0, signal-hook-registry 1.4.8, simd_cesu8 1.2.0, smallvec 1.16.2,
-smol_str 0.2.2, stable_deref_trait 1.2.1, syn 1.0.109, tempfile 3.27.0, ttf-parser 0.25.1,
-unicode-segmentation 1.13.3, unicode-width 0.2.2, url 2.5.8, uuid 1.27.0, wasi
-0.11.1+wasi-snapshot-preview1, wasip2 1.0.4+wasi-0.2.12, wasm-bindgen 0.2.129, wasm-bindgen-futures
-0.4.79, wasm-bindgen-macro 0.2.129, wasm-bindgen-macro-support 0.2.129, wasm-bindgen-shared 0.2.129,
-web-sys 0.3.106, weezl 0.1.12, wit-bindgen 0.57.1
+1.0.0, crossbeam-channel 0.5.17, crossbeam-deque 0.8.8, crossbeam-epoch 0.9.21, crossbeam-utils
+0.8.23, dbus-secret-service 4.1.0, displaydoc 0.2.7, either 1.19.0, equivalent 1.0.2, errno 0.3.14,
+euclid 0.22.14, event-listener 5.4.2, event-listener-strategy 0.5.4, fastrand 2.5.0, flate2 1.1.10,
+form_urlencoded 1.2.2, futures-lite 2.6.1, gethostname 1.1.0, gif 0.14.2, glow 0.17.0, gltf 1.4.1,
+gltf-derive 1.4.1, gltf-json 1.4.1, hashbrown 0.16.1, hashbrown 0.17.1, hermit-abi 0.5.3, httparse
+1.10.1, idna 1.1.0, idna_adapter 1.2.2, indexmap 2.14.2, itertools 0.13.0, itertools 0.15.0, js-sys
+0.3.106, keyboard-types 0.8.3, khronos-egl 6.0.0, lazy_static 1.5.1, linux-raw-sys 0.12.1,
+linux-raw-sys 0.4.15, lock_api 0.4.14, log 0.4.34, muda 0.21.2, num 0.4.3, num-bigint 0.4.8,
+num-complex 0.4.6, num-integer 0.1.47, num-iter 0.1.46, num-rational 0.4.2, num-traits 0.2.19,
+once_cell 1.21.4, openssl-probe 0.2.1, ordered-stream 0.2.0, parking 2.2.1, parking_lot 0.12.5,
+parking_lot_core 0.9.12, percent-encoding 2.3.2, piper 0.2.5, plain 0.2.3, png 0.18.1, polling
+3.11.0, pollster 0.4.0, pollster 1.0.1, rayon 1.12.0, rayon-core 1.13.0, renderdoc-sys 1.1.0, robust
+1.2.0, ron 0.12.2, roxmltree 0.21.1, rustc-hash 1.1.0, rustix 0.38.44, rustix 1.1.5, rustls 0.23.46,
+rustls-native-certs 0.8.5, scoped-tls 1.0.1, scopeguard 1.2.0, secret-service 4.0.0,
+security-framework 2.11.1, security-framework 3.7.0, security-framework-sys 2.17.0,
+signal-hook-registry 1.4.8, simd_cesu8 1.2.0, smallvec 1.16.2, smol_str 0.2.2, stable_deref_trait
+1.2.1, syn 1.0.109, tempfile 3.27.0, ttf-parser 0.25.1, unicode-segmentation 1.13.3, unicode-width
+0.2.2, url 2.5.8, uuid 1.27.0, wasi 0.11.1+wasi-snapshot-preview1, wasip2 1.0.4+wasi-0.2.12,
+wasm-bindgen 0.2.129, wasm-bindgen-futures 0.4.79, wasm-bindgen-macro 0.2.129,
+wasm-bindgen-macro-support 0.2.129, wasm-bindgen-shared 0.2.129, web-sys 0.3.106, weezl 0.1.12,
+wit-bindgen 0.57.1
 ================================================================================
 
 Apache License
@@ -4030,7 +4030,605 @@ Apache License
    limitations under the License.
 
 ================================================================================
-crossbeam-deque 0.8.8, crossbeam-epoch 0.9.21, crossbeam-utils 0.8.23
+crossbeam-channel 0.5.17
+================================================================================
+
+===============================================================================
+
+matching.go
+https://creativecommons.org/licenses/by/3.0/legalcode
+
+Creative Commons Legal Code
+
+Attribution 3.0 Unported
+
+    CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE
+    LEGAL SERVICES. DISTRIBUTION OF THIS LICENSE DOES NOT CREATE AN
+    ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS
+    INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
+    REGARDING THE INFORMATION PROVIDED, AND DISCLAIMS LIABILITY FOR
+    DAMAGES RESULTING FROM ITS USE.
+
+License
+
+THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CREATIVE
+COMMONS PUBLIC LICENSE ("CCPL" OR "LICENSE"). THE WORK IS PROTECTED BY
+COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS
+AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.
+
+BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HERE, YOU ACCEPT AND AGREE
+TO BE BOUND BY THE TERMS OF THIS LICENSE. TO THE EXTENT THIS LICENSE MAY
+BE CONSIDERED TO BE A CONTRACT, THE LICENSOR GRANTS YOU THE RIGHTS
+CONTAINED HERE IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND
+CONDITIONS.
+
+1. Definitions
+
+ a. "Adaptation" means a work based upon the Work, or upon the Work and
+    other pre-existing works, such as a translation, adaptation,
+    derivative work, arrangement of music or other alterations of a
+    literary or artistic work, or phonogram or performance and includes
+    cinematographic adaptations or any other form in which the Work may be
+    recast, transformed, or adapted including in any form recognizably
+    derived from the original, except that a work that constitutes a
+    Collection will not be considered an Adaptation for the purpose of
+    this License. For the avoidance of doubt, where the Work is a musical
+    work, performance or phonogram, the synchronization of the Work in
+    timed-relation with a moving image ("synching") will be considered an
+    Adaptation for the purpose of this License.
+ b. "Collection" means a collection of literary or artistic works, such as
+    encyclopedias and anthologies, or performances, phonograms or
+    broadcasts, or other works or subject matter other than works listed
+    in Section 1(f) below, which, by reason of the selection and
+    arrangement of their contents, constitute intellectual creations, in
+    which the Work is included in its entirety in unmodified form along
+    with one or more other contributions, each constituting separate and
+    independent works in themselves, which together are assembled into a
+    collective whole. A work that constitutes a Collection will not be
+    considered an Adaptation (as defined above) for the purposes of this
+    License.
+ c. "Distribute" means to make available to the public the original and
+    copies of the Work or Adaptation, as appropriate, through sale or
+    other transfer of ownership.
+ d. "Licensor" means the individual, individuals, entity or entities that
+    offer(s) the Work under the terms of this License.
+ e. "Original Author" means, in the case of a literary or artistic work,
+    the individual, individuals, entity or entities who created the Work
+    or if no individual or entity can be identified, the publisher; and in
+    addition (i) in the case of a performance the actors, singers,
+    musicians, dancers, and other persons who act, sing, deliver, declaim,
+    play in, interpret or otherwise perform literary or artistic works or
+    expressions of folklore; (ii) in the case of a phonogram the producer
+    being the person or legal entity who first fixes the sounds of a
+    performance or other sounds; and, (iii) in the case of broadcasts, the
+    organization that transmits the broadcast.
+ f. "Work" means the literary and/or artistic work offered under the terms
+    of this License including without limitation any production in the
+    literary, scientific and artistic domain, whatever may be the mode or
+    form of its expression including digital form, such as a book,
+    pamphlet and other writing; a lecture, address, sermon or other work
+    of the same nature; a dramatic or dramatico-musical work; a
+    choreographic work or entertainment in dumb show; a musical
+    composition with or without words; a cinematographic work to which are
+    assimilated works expressed by a process analogous to cinematography;
+    a work of drawing, painting, architecture, sculpture, engraving or
+    lithography; a photographic work to which are assimilated works
+    expressed by a process analogous to photography; a work of applied
+    art; an illustration, map, plan, sketch or three-dimensional work
+    relative to geography, topography, architecture or science; a
+    performance; a broadcast; a phonogram; a compilation of data to the
+    extent it is protected as a copyrightable work; or a work performed by
+    a variety or circus performer to the extent it is not otherwise
+    considered a literary or artistic work.
+ g. "You" means an individual or entity exercising rights under this
+    License who has not previously violated the terms of this License with
+    respect to the Work, or who has received express permission from the
+    Licensor to exercise rights under this License despite a previous
+    violation.
+ h. "Publicly Perform" means to perform public recitations of the Work and
+    to communicate to the public those public recitations, by any means or
+    process, including by wire or wireless means or public digital
+    performances; to make available to the public Works in such a way that
+    members of the public may access these Works from a place and at a
+    place individually chosen by them; to perform the Work to the public
+    by any means or process and the communication to the public of the
+    performances of the Work, including by public digital performance; to
+    broadcast and rebroadcast the Work by any means including signs,
+    sounds or images.
+ i. "Reproduce" means to make copies of the Work by any means including
+    without limitation by sound or visual recordings and the right of
+    fixation and reproducing fixations of the Work, including storage of a
+    protected performance or phonogram in digital form or other electronic
+    medium.
+
+2. Fair Dealing Rights. Nothing in this License is intended to reduce,
+limit, or restrict any uses free from copyright or rights arising from
+limitations or exceptions that are provided for in connection with the
+copyright protection under copyright law or other applicable laws.
+
+3. License Grant. Subject to the terms and conditions of this License,
+Licensor hereby grants You a worldwide, royalty-free, non-exclusive,
+perpetual (for the duration of the applicable copyright) license to
+exercise the rights in the Work as stated below:
+
+ a. to Reproduce the Work, to incorporate the Work into one or more
+    Collections, and to Reproduce the Work as incorporated in the
+    Collections;
+ b. to create and Reproduce Adaptations provided that any such Adaptation,
+    including any translation in any medium, takes reasonable steps to
+    clearly label, demarcate or otherwise identify that changes were made
+    to the original Work. For example, a translation could be marked "The
+    original work was translated from English to Spanish," or a
+    modification could indicate "The original work has been modified.";
+ c. to Distribute and Publicly Perform the Work including as incorporated
+    in Collections; and,
+ d. to Distribute and Publicly Perform Adaptations.
+ e. For the avoidance of doubt:
+
+     i. Non-waivable Compulsory License Schemes. In those jurisdictions in
+        which the right to collect royalties through any statutory or
+        compulsory licensing scheme cannot be waived, the Licensor
+        reserves the exclusive right to collect such royalties for any
+        exercise by You of the rights granted under this License;
+    ii. Waivable Compulsory License Schemes. In those jurisdictions in
+        which the right to collect royalties through any statutory or
+        compulsory licensing scheme can be waived, the Licensor waives the
+        exclusive right to collect such royalties for any exercise by You
+        of the rights granted under this License; and,
+   iii. Voluntary License Schemes. The Licensor waives the right to
+        collect royalties, whether individually or, in the event that the
+        Licensor is a member of a collecting society that administers
+        voluntary licensing schemes, via that society, from any exercise
+        by You of the rights granted under this License.
+
+The above rights may be exercised in all media and formats whether now
+known or hereafter devised. The above rights include the right to make
+such modifications as are technically necessary to exercise the rights in
+other media and formats. Subject to Section 8(f), all rights not expressly
+granted by Licensor are hereby reserved.
+
+4. Restrictions. The license granted in Section 3 above is expressly made
+subject to and limited by the following restrictions:
+
+ a. You may Distribute or Publicly Perform the Work only under the terms
+    of this License. You must include a copy of, or the Uniform Resource
+    Identifier (URI) for, this License with every copy of the Work You
+    Distribute or Publicly Perform. You may not offer or impose any terms
+    on the Work that restrict the terms of this License or the ability of
+    the recipient of the Work to exercise the rights granted to that
+    recipient under the terms of the License. You may not sublicense the
+    Work. You must keep intact all notices that refer to this License and
+    to the disclaimer of warranties with every copy of the Work You
+    Distribute or Publicly Perform. When You Distribute or Publicly
+    Perform the Work, You may not impose any effective technological
+    measures on the Work that restrict the ability of a recipient of the
+    Work from You to exercise the rights granted to that recipient under
+    the terms of the License. This Section 4(a) applies to the Work as
+    incorporated in a Collection, but this does not require the Collection
+    apart from the Work itself to be made subject to the terms of this
+    License. If You create a Collection, upon notice from any Licensor You
+    must, to the extent practicable, remove from the Collection any credit
+    as required by Section 4(b), as requested. If You create an
+    Adaptation, upon notice from any Licensor You must, to the extent
+    practicable, remove from the Adaptation any credit as required by
+    Section 4(b), as requested.
+ b. If You Distribute, or Publicly Perform the Work or any Adaptations or
+    Collections, You must, unless a request has been made pursuant to
+    Section 4(a), keep intact all copyright notices for the Work and
+    provide, reasonable to the medium or means You are utilizing: (i) the
+    name of the Original Author (or pseudonym, if applicable) if supplied,
+    and/or if the Original Author and/or Licensor designate another party
+    or parties (e.g., a sponsor institute, publishing entity, journal) for
+    attribution ("Attribution Parties") in Licensor's copyright notice,
+    terms of service or by other reasonable means, the name of such party
+    or parties; (ii) the title of the Work if supplied; (iii) to the
+    extent reasonably practicable, the URI, if any, that Licensor
+    specifies to be associated with the Work, unless such URI does not
+    refer to the copyright notice or licensing information for the Work;
+    and (iv) , consistent with Section 3(b), in the case of an Adaptation,
+    a credit identifying the use of the Work in the Adaptation (e.g.,
+    "French translation of the Work by Original Author," or "Screenplay
+    based on original Work by Original Author"). The credit required by
+    this Section 4 (b) may be implemented in any reasonable manner;
+    provided, however, that in the case of a Adaptation or Collection, at
+    a minimum such credit will appear, if a credit for all contributing
+    authors of the Adaptation or Collection appears, then as part of these
+    credits and in a manner at least as prominent as the credits for the
+    other contributing authors. For the avoidance of doubt, You may only
+    use the credit required by this Section for the purpose of attribution
+    in the manner set out above and, by exercising Your rights under this
+    License, You may not implicitly or explicitly assert or imply any
+    connection with, sponsorship or endorsement by the Original Author,
+    Licensor and/or Attribution Parties, as appropriate, of You or Your
+    use of the Work, without the separate, express prior written
+    permission of the Original Author, Licensor and/or Attribution
+    Parties.
+ c. Except as otherwise agreed in writing by the Licensor or as may be
+    otherwise permitted by applicable law, if You Reproduce, Distribute or
+    Publicly Perform the Work either by itself or as part of any
+    Adaptations or Collections, You must not distort, mutilate, modify or
+    take other derogatory action in relation to the Work which would be
+    prejudicial to the Original Author's honor or reputation. Licensor
+    agrees that in those jurisdictions (e.g. Japan), in which any exercise
+    of the right granted in Section 3(b) of this License (the right to
+    make Adaptations) would be deemed to be a distortion, mutilation,
+    modification or other derogatory action prejudicial to the Original
+    Author's honor and reputation, the Licensor will waive or not assert,
+    as appropriate, this Section, to the fullest extent permitted by the
+    applicable national law, to enable You to reasonably exercise Your
+    right under Section 3(b) of this License (right to make Adaptations)
+    but not otherwise.
+
+5. Representations, Warranties and Disclaimer
+
+UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR
+OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY
+KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
+INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY,
+FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF
+LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS,
+WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION
+OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU.
+
+6. Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
+LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR
+ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES
+ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS
+BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+
+7. Termination
+
+ a. This License and the rights granted hereunder will terminate
+    automatically upon any breach by You of the terms of this License.
+    Individuals or entities who have received Adaptations or Collections
+    from You under this License, however, will not have their licenses
+    terminated provided such individuals or entities remain in full
+    compliance with those licenses. Sections 1, 2, 5, 6, 7, and 8 will
+    survive any termination of this License.
+ b. Subject to the above terms and conditions, the license granted here is
+    perpetual (for the duration of the applicable copyright in the Work).
+    Notwithstanding the above, Licensor reserves the right to release the
+    Work under different license terms or to stop distributing the Work at
+    any time; provided, however that any such election will not serve to
+    withdraw this License (or any other license that has been, or is
+    required to be, granted under the terms of this License), and this
+    License will continue in full force and effect unless terminated as
+    stated above.
+
+8. Miscellaneous
+
+ a. Each time You Distribute or Publicly Perform the Work or a Collection,
+    the Licensor offers to the recipient a license to the Work on the same
+    terms and conditions as the license granted to You under this License.
+ b. Each time You Distribute or Publicly Perform an Adaptation, Licensor
+    offers to the recipient a license to the original Work on the same
+    terms and conditions as the license granted to You under this License.
+ c. If any provision of this License is invalid or unenforceable under
+    applicable law, it shall not affect the validity or enforceability of
+    the remainder of the terms of this License, and without further action
+    by the parties to this agreement, such provision shall be reformed to
+    the minimum extent necessary to make such provision valid and
+    enforceable.
+ d. No term or provision of this License shall be deemed waived and no
+    breach consented to unless such waiver or consent shall be in writing
+    and signed by the party to be charged with such waiver or consent.
+ e. This License constitutes the entire agreement between the parties with
+    respect to the Work licensed here. There are no understandings,
+    agreements or representations with respect to the Work not specified
+    here. Licensor shall not be bound by any additional provisions that
+    may appear in any communication from You. This License may not be
+    modified without the mutual written agreement of the Licensor and You.
+ f. The rights granted under, and the subject matter referenced, in this
+    License were drafted utilizing the terminology of the Berne Convention
+    for the Protection of Literary and Artistic Works (as amended on
+    September 28, 1979), the Rome Convention of 1961, the WIPO Copyright
+    Treaty of 1996, the WIPO Performances and Phonograms Treaty of 1996
+    and the Universal Copyright Convention (as revised on July 24, 1971).
+    These rights and subject matter take effect in the relevant
+    jurisdiction in which the License terms are sought to be enforced
+    according to the corresponding provisions of the implementation of
+    those treaty provisions in the applicable national law. If the
+    standard suite of rights granted under applicable copyright law
+    includes additional rights not granted under this License, such
+    additional rights are deemed to be included in the License; this
+    License is not intended to restrict the license of any rights under
+    applicable law.
+
+
+Creative Commons Notice
+
+    Creative Commons is not a party to this License, and makes no warranty
+    whatsoever in connection with the Work. Creative Commons will not be
+    liable to You or any party on any legal theory for any damages
+    whatsoever, including without limitation any general, special,
+    incidental or consequential damages arising in connection to this
+    license. Notwithstanding the foregoing two (2) sentences, if Creative
+    Commons has expressly identified itself as the Licensor hereunder, it
+    shall have all rights and obligations of Licensor.
+
+    Except for the limited purpose of indicating to the public that the
+    Work is licensed under the CCPL, Creative Commons does not authorize
+    the use by either party of the trademark "Creative Commons" or any
+    related trademark or logo of Creative Commons without the prior
+    written consent of Creative Commons. Any permitted use will be in
+    compliance with Creative Commons' then-current trademark usage
+    guidelines, as may be published on its website or otherwise made
+    available upon request from time to time. For the avoidance of doubt,
+    this trademark restriction does not form part of this License.
+
+    Creative Commons may be contacted at https://creativecommons.org/.
+
+===============================================================================
+
+The Go Programming Language
+https://golang.org/LICENSE
+
+Copyright (c) 2009 The Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===============================================================================
+
+The Rust Programming Language
+https://github.com/rust-lang/rust/blob/master/LICENSE-MIT
+
+Permission is hereby granted, free of charge, to any
+person obtaining a copy of this software and associated
+documentation files (the "Software"), to deal in the
+Software without restriction, including without
+limitation the rights to use, copy, modify, merge,
+publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software
+is furnished to do so, subject to the following
+conditions:
+
+The above copyright notice and this permission notice
+shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
+IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+
+===============================================================================
+
+The Rust Programming Language
+https://github.com/rust-lang/rust/blob/master/LICENSE-APACHE
+
+                              Apache License
+                        Version 2.0, January 2004
+                     http://www.apache.org/licenses/
+
+TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+1. Definitions.
+
+   "License" shall mean the terms and conditions for use, reproduction,
+   and distribution as defined by Sections 1 through 9 of this document.
+
+   "Licensor" shall mean the copyright owner or entity authorized by
+   the copyright owner that is granting the License.
+
+   "Legal Entity" shall mean the union of the acting entity and all
+   other entities that control, are controlled by, or are under common
+   control with that entity. For the purposes of this definition,
+   "control" means (i) the power, direct or indirect, to cause the
+   direction or management of such entity, whether by contract or
+   otherwise, or (ii) ownership of fifty percent (50%) or more of the
+   outstanding shares, or (iii) beneficial ownership of such entity.
+
+   "You" (or "Your") shall mean an individual or Legal Entity
+   exercising permissions granted by this License.
+
+   "Source" form shall mean the preferred form for making modifications,
+   including but not limited to software source code, documentation
+   source, and configuration files.
+
+   "Object" form shall mean any form resulting from mechanical
+   transformation or translation of a Source form, including but
+   not limited to compiled object code, generated documentation,
+   and conversions to other media types.
+
+   "Work" shall mean the work of authorship, whether in Source or
+   Object form, made available under the License, as indicated by a
+   copyright notice that is included in or attached to the work
+   (an example is provided in the Appendix below).
+
+   "Derivative Works" shall mean any work, whether in Source or Object
+   form, that is based on (or derived from) the Work and for which the
+   editorial revisions, annotations, elaborations, or other modifications
+   represent, as a whole, an original work of authorship. For the purposes
+   of this License, Derivative Works shall not include works that remain
+   separable from, or merely link (or bind by name) to the interfaces of,
+   the Work and Derivative Works thereof.
+
+   "Contribution" shall mean any work of authorship, including
+   the original version of the Work and any modifications or additions
+   to that Work or Derivative Works thereof, that is intentionally
+   submitted to Licensor for inclusion in the Work by the copyright owner
+   or by an individual or Legal Entity authorized to submit on behalf of
+   the copyright owner. For the purposes of this definition, "submitted"
+   means any form of electronic, verbal, or written communication sent
+   to the Licensor or its representatives, including but not limited to
+   communication on electronic mailing lists, source code control systems,
+   and issue tracking systems that are managed by, or on behalf of, the
+   Licensor for the purpose of discussing and improving the Work, but
+   excluding communication that is conspicuously marked or otherwise
+   designated in writing by the copyright owner as "Not a Contribution."
+
+   "Contributor" shall mean Licensor and any individual or Legal Entity
+   on behalf of whom a Contribution has been received by Licensor and
+   subsequently incorporated within the Work.
+
+2. Grant of Copyright License. Subject to the terms and conditions of
+   this License, each Contributor hereby grants to You a perpetual,
+   worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+   copyright license to reproduce, prepare Derivative Works of,
+   publicly display, publicly perform, sublicense, and distribute the
+   Work and such Derivative Works in Source or Object form.
+
+3. Grant of Patent License. Subject to the terms and conditions of
+   this License, each Contributor hereby grants to You a perpetual,
+   worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+   (except as stated in this section) patent license to make, have made,
+   use, offer to sell, sell, import, and otherwise transfer the Work,
+   where such license applies only to those patent claims licensable
+   by such Contributor that are necessarily infringed by their
+   Contribution(s) alone or by combination of their Contribution(s)
+   with the Work to which such Contribution(s) was submitted. If You
+   institute patent litigation against any entity (including a
+   cross-claim or counterclaim in a lawsuit) alleging that the Work
+   or a Contribution incorporated within the Work constitutes direct
+   or contributory patent infringement, then any patent licenses
+   granted to You under this License for that Work shall terminate
+   as of the date such litigation is filed.
+
+4. Redistribution. You may reproduce and distribute copies of the
+   Work or Derivative Works thereof in any medium, with or without
+   modifications, and in Source or Object form, provided that You
+   meet the following conditions:
+
+   (a) You must give any other recipients of the Work or
+       Derivative Works a copy of this License; and
+
+   (b) You must cause any modified files to carry prominent notices
+       stating that You changed the files; and
+
+   (c) You must retain, in the Source form of any Derivative Works
+       that You distribute, all copyright, patent, trademark, and
+       attribution notices from the Source form of the Work,
+       excluding those notices that do not pertain to any part of
+       the Derivative Works; and
+
+   (d) If the Work includes a "NOTICE" text file as part of its
+       distribution, then any Derivative Works that You distribute must
+       include a readable copy of the attribution notices contained
+       within such NOTICE file, excluding those notices that do not
+       pertain to any part of the Derivative Works, in at least one
+       of the following places: within a NOTICE text file distributed
+       as part of the Derivative Works; within the Source form or
+       documentation, if provided along with the Derivative Works; or,
+       within a display generated by the Derivative Works, if and
+       wherever such third-party notices normally appear. The contents
+       of the NOTICE file are for informational purposes only and
+       do not modify the License. You may add Your own attribution
+       notices within Derivative Works that You distribute, alongside
+       or as an addendum to the NOTICE text from the Work, provided
+       that such additional attribution notices cannot be construed
+       as modifying the License.
+
+   You may add Your own copyright statement to Your modifications and
+   may provide additional or different license terms and conditions
+   for use, reproduction, or distribution of Your modifications, or
+   for any such Derivative Works as a whole, provided Your use,
+   reproduction, and distribution of the Work otherwise complies with
+   the conditions stated in this License.
+
+5. Submission of Contributions. Unless You explicitly state otherwise,
+   any Contribution intentionally submitted for inclusion in the Work
+   by You to the Licensor shall be under the terms and conditions of
+   this License, without any additional terms or conditions.
+   Notwithstanding the above, nothing herein shall supersede or modify
+   the terms of any separate license agreement you may have executed
+   with Licensor regarding such Contributions.
+
+6. Trademarks. This License does not grant permission to use the trade
+   names, trademarks, service marks, or product names of the Licensor,
+   except as required for reasonable and customary use in describing the
+   origin of the Work and reproducing the content of the NOTICE file.
+
+7. Disclaimer of Warranty. Unless required by applicable law or
+   agreed to in writing, Licensor provides the Work (and each
+   Contributor provides its Contributions) on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+   implied, including, without limitation, any warranties or conditions
+   of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+   PARTICULAR PURPOSE. You are solely responsible for determining the
+   appropriateness of using or redistributing the Work and assume any
+   risks associated with Your exercise of permissions under this License.
+
+8. Limitation of Liability. In no event and under no legal theory,
+   whether in tort (including negligence), contract, or otherwise,
+   unless required by applicable law (such as deliberate and grossly
+   negligent acts) or agreed to in writing, shall any Contributor be
+   liable to You for damages, including any direct, indirect, special,
+   incidental, or consequential damages of any character arising as a
+   result of this License or out of the use or inability to use the
+   Work (including but not limited to damages for loss of goodwill,
+   work stoppage, computer failure or malfunction, or any and all
+   other commercial damages or losses), even if such Contributor
+   has been advised of the possibility of such damages.
+
+9. Accepting Warranty or Additional Liability. While redistributing
+   the Work or Derivative Works thereof, You may choose to offer,
+   and charge a fee for, acceptance of support, warranty, indemnity,
+   or other liability obligations and/or rights consistent with this
+   License. However, in accepting such obligations, You may act only
+   on Your own behalf and on Your sole responsibility, not on behalf
+   of any other Contributor, and only if You agree to indemnify,
+   defend, and hold each Contributor harmless for any liability
+   incurred by, or claims asserted against, such Contributor by reason
+   of your accepting any such warranty or additional liability.
+
+END OF TERMS AND CONDITIONS
+
+APPENDIX: How to apply the Apache License to your work.
+
+   To apply the Apache License to your work, attach the following
+   boilerplate notice, with the fields enclosed by brackets "[]"
+   replaced with your own identifying information. (Don't include
+   the brackets!)  The text should be enclosed in the appropriate
+   comment syntax for the file format. We also recommend that a
+   file or class name and description of purpose be included on the
+   same "printed page" as the copyright notice for easier
+   identification within third-party archives.
+
+Copyright [yyyy] [name of copyright owner]
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+	http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+================================================================================
+crossbeam-channel 0.5.17, crossbeam-deque 0.8.8, crossbeam-epoch 0.9.21, crossbeam-utils 0.8.23
 ================================================================================
 
 The MIT License (MIT)
@@ -7716,6 +8314,30 @@ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.
 
+================================================================================
+keyboard-types 0.8.3
+================================================================================
+
+Copyright (c) 2017 Pyfisch
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
 ================================================================================
 keyring 3.6.3
 ================================================================================
@@ -9452,6 +10074,56 @@ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+================================================================================
+muda 0.21.2
+================================================================================
+
+MIT License
+
+Copyright (c) 2022-2022 Tauri Programme within The Commons Conservancy
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
+================================================================================
+muda 0.21.2
+================================================================================
+
+SPDXVersion: SPDX-2.1
+DataLicense: CC0-1.0
+PackageName: muda
+DataFormat: SPDXRef-1
+PackageSupplier: Organization: The Tauri Programme in the Commons Conservancy
+PackageHomePage: https://tauri.app
+PackageLicenseDeclared: Apache-2.0
+PackageLicenseDeclared: MIT
+PackageCopyrightText: 2020-2022, The Tauri Programme in the Commons Conservancy
+PackageSummary: <text>Menu Utilities for Desktop Applications.
+                </text>
+PackageComment: <text>The package includes the following libraries; see
+Relationship information.
+                </text>
+Created: 2022-12-05T09:00:00Z
+PackageDownloadLocation: git://github.com/tauri-apps/muda
+PackageDownloadLocation: git+https://github.com/tauri-apps/muda.git
+PackageDownloadLocation: git+ssh://github.com/tauri-apps/muda.git
+Creator: Person: Daniel Thompson-Yvetot
+
 ================================================================================
 multiversion_no_op 1.0.0
 ================================================================================
@@ -11781,6 +12453,32 @@ OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 The files under third-party/chromium are licensed as described in
 third-party/chromium/LICENSE.
 
+================================================================================
+ruzstd 0.9.1
+================================================================================
+
+MIT License
+
+Copyright (c) 2019 Moritz Borcherding
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
 ================================================================================
 schannel 0.1.29
 ================================================================================
@@ -13042,6 +13740,32 @@ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 THE SOFTWARE.
 
+================================================================================
+twox-hash 2.1.5
+================================================================================
+
+The MIT License (MIT)
+
+Copyright (c) 2015 Jake Goulding
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
 ================================================================================
 type-map 0.5.1
 ================================================================================
@@ -15663,7 +16387,7 @@ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.
 
 ================================================================================
-zip 8.6.0, zip 9.0.4
+zip 9.0.4
 ================================================================================
 
 The MIT License (MIT)
@@ -15918,89 +16642,6 @@ Apache License
    See the License for the specific language governing permissions and
    limitations under the License.
 
-================================================================================
-zstd 0.13.3
-================================================================================
-
-The MIT License (MIT)
-Copyright (c) 2016 Alexandre Bury
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-================================================================================
-zstd 0.14.2, zstd-safe 7.3.0, zstd-safe 8.1.0, zstd-sys 2.1.1+zstd.1.5.7
-================================================================================
-
-BSD 3-Clause License
-
-Copyright (c) 2026, Alexandre Bury
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-3. Neither the name of the copyright holder nor the names of its
-   contributors may be used to endorse or promote products derived from
-   this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-================================================================================
-zstd-sys 2.1.1+zstd.1.5.7
-================================================================================
-
-The auto-generated bindings are under the 3-clause BSD license:
-
-BSD License
-
-For Zstandard software
-
-Copyright (c) Meta Platforms, Inc. and affiliates. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
- * Neither the name Facebook, nor Meta, nor the names of its contributors may
-   be used to endorse or promote products derived from this software without
-   specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
 ================================================================================
 zune-core 0.5.3, zune-jpeg 0.5.15
 ================================================================================
@@ -16068,13 +16709,13 @@ accesskit_winit 0.32.2: Apache-2.0 (https://github.com/AccessKit/accesskit)
 array-macro 2.1.8: MIT OR Apache-2.0 (https://codeberg.org/xfix/array-macro)
 block2 0.5.1: MIT (https://github.com/madsmtm/objc2)
 block2 0.6.2: MIT (https://github.com/madsmtm/objc2)
-cadmpeg-codec-freecad 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-codec-rhino 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-codec-step 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-container 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-core 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-ir 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-registry 0.6.1: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-codec-freecad 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-codec-rhino 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-codec-step 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-container 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-core 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-ir 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-registry 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
 clipboard-win 5.4.1: BSL-1.0 (https://github.com/DoumanAsh/clipboard-win)
 convert_case 0.4.0: MIT (https://github.com/rutrum/convert-case)
 dispatch 0.2.0: MIT (http://github.com/SSheldon/rust-dispatch)

apps/solidcraft-cli/Cargo.toml

@@ -19,6 +19,11 @@ path = "src/main.rs"
 name = "solvecraft-cli"
 path = "src/alias.rs"
 
+[features]
+default = ["raytrace-cpu"]
+bundled-render-library = ["solidcraft-engine/bundled-render-library"]
+raytrace-cpu = ["solidcraft-engine/raytrace-cpu"]
+
 [dependencies]
 solidcraft-engine = { workspace = true }
 solidcraft-gpu = { workspace = true }

apps/solidcraft-cli/examples/studio_evidence.rs

@@ -0,0 +1,151 @@
+//! Reproducible evidence through the production command/job interfaces.
+//! Usage: studio_evidence RECIPE.json RENDER-PARAMS.json OUTPUT.png
+//! Writes the editable design, command timings and actual adapter/job metadata beside PNG.
+//! Accepts runtime requests as well as inline or named saved render jobs.
+use serde_json::{Value, json};
+use solidcraft_engine::{
+    Session,
+    doc::render_settings::{RenderJob, RenderSetup},
+    render::job::{CpuHost, ErrorCode, JobId, Phase},
+};
+use std::{
+    io::Read,
+    path::Path,
+    time::{Duration, Instant},
+};
+
+fn read_json(path: &str) -> Result<Value, String> {
+    let mut bytes = Vec::new();
+    std::fs::File::open(path).map_err(|e| format!("{path}: {e}"))?.take(16_777_217).read_to_end(&mut bytes).map_err(|e| e.to_string())?;
+    if bytes.len() > 16_777_216 {
+        return Err("evidence input exceeds 16 MiB".into());
+    }
+    serde_json::from_slice(&bytes).map_err(|e| format!("{path}: {e}"))
+}
+
+// Only decide which optional host must be installed. The production command
+// still validates and resolves the actual request without a second wire format.
+fn needs_gpu(session: &Session, params: &Value) -> Result<bool, String> {
+    let inline = params.get("settings").filter(|value| !value.is_null());
+    let named = params.get("setup").filter(|value| !value.is_null());
+    if inline.is_some() && named.is_some() {
+        return Err("choose either setup or settings".into());
+    }
+    let inline_setup = inline
+        .filter(|value| value.get("job").is_some_and(|job| !job.is_null()))
+        .map(|value| serde_json::from_value::<RenderSetup>(value.clone()).map_err(|e| e.to_string()))
+        .transpose()?;
+    let setup = if let Some(name) = named.and_then(Value::as_str) {
+        Some(session.doc.render.setups.get(name).ok_or("no saved render setup with that name")?)
+    } else {
+        inline_setup.as_ref()
+    };
+    if let Some(setup) = setup
+        && let Some(job) = &setup.job
+    {
+        if params.as_object().is_some_and(|object| object.keys().any(|key| !matches!(key.as_str(), "setup" | "settings" | "replace"))) {
+            return Err("saved render jobs cannot be mixed with runtime controls".into());
+        }
+        setup.validate().map_err(|e| e.to_string())?;
+        return Ok(matches!(job, RenderJob::GpuPath { .. }));
+    }
+    Ok(params.get("progressive").and_then(Value::as_bool) == Some(true))
+}
+
+fn run() -> Result<(), String> {
+    let args: Vec<String> = std::env::args().skip(1).collect();
+    let [recipe_path, params_path, output_path] = args.as_slice() else {
+        return Err("usage: studio_evidence RECIPE.json RENDER-PARAMS.json OUTPUT.png".into());
+    };
+    let output = Path::new(output_path);
+    if !output.extension().is_some_and(|e| e.eq_ignore_ascii_case("png")) {
+        return Err("output must have a .png extension".into());
+    }
+    let recipe = read_json(recipe_path)?;
+    let params = read_json(params_path)?;
+    let mut session = Session::default();
+    eprintln!("Generating original CAD scene from {recipe_path}");
+    let generation_start = Instant::now();
+    let (commands, command_timings) = session.run_script_timed(&recipe, false).map_err(|e| e.to_string())?;
+    let generation_seconds = generation_start.elapsed().as_secs_f64();
+    let design_path = output.with_extension("solidcraft");
+    session.execute("file.save_as", &json!({"path":design_path})).map_err(|e| e.to_string())?;
+    let scene = solidcraft_engine::product_scene::extract(&session).map_err(|e| e.to_string())?;
+    let bodies: Vec<Value> = scene
+        .meshes
+        .iter()
+        .map(|mesh| json!({"name":mesh.name,"vertices":mesh.mesh.positions.len(),"triangles":mesh.mesh.triangles.len()}))
+        .collect();
+    drop(scene);
+
+    let cpu_host_start = Instant::now();
+    session.set_render_job_host(Some(CpuHost::for_platform().map_err(|e| e.to_string())?)).map_err(|e| e.to_string())?;
+    let cpu_host_seconds = cpu_host_start.elapsed().as_secs_f64();
+    // Match runtime and saved-job dispatch. CPU evidence must not require a
+    // Vulkan device, parse GPU policy or initialize a GPU host.
+    let (adapter_report, gpu_host_seconds) = if needs_gpu(&session, &params)? {
+        let gpu_host_start = Instant::now();
+        let policy = solidcraft_gpu::select::Policy::from_env().map_err(|e| e.to_string())?;
+        let (adapter, report) =
+            solidcraft_gpu::select::pick_vulkan(policy, |_| true).ok_or("no Vulkan adapter satisfies the requested GPU policy")?;
+        session.register_render_job_host(solidcraft_gpu::path::host_on_adapter(&adapter).map_err(|e| e.to_string())?).map_err(|e| e.to_string())?;
+        (Some(report), Some(gpu_host_start.elapsed().as_secs_f64()))
+    } else {
+        (None, None)
+    };
+    let preflight = session.execute("render.preflight", &params).map_err(|e| e.to_string())?;
+    let start = Instant::now();
+    let started = session.execute("render.start", &params).map_err(|e| e.to_string())?;
+    let executor = started
+        .get("resolved")
+        .and_then(|resolved| resolved.get("executor"))
+        .and_then(Value::as_str)
+        .ok_or("started job did not report the resolved image executor")?
+        .to_owned();
+    let id: JobId = serde_json::from_value(started.get("job").cloned().ok_or("missing job id")?).map_err(|e| e.to_string())?;
+    let handle = session.render_job_handle(id).map_err(|e| e.to_string())?;
+    eprintln!("Rendering through production {executor} executor");
+    if let Some(adapter) = &adapter_report {
+        eprintln!("GPU adapter: {adapter:?}");
+    }
+    let status = loop {
+        match handle.wait_timeout(Duration::from_secs(10)) {
+            Ok(status) => break status,
+            Err(error) if error.code == ErrorCode::TimedOut && start.elapsed() < Duration::from_secs(3600) => {
+                let status = handle.status().map_err(|e| e.to_string())?;
+                eprintln!(
+                    "Render progress: {:?} {}/{} after {:.1}s",
+                    status.progress.phase,
+                    status.progress.done,
+                    status.progress.total,
+                    start.elapsed().as_secs_f64()
+                );
+            }
+            Err(error) => {
+                let _ = handle.cancel();
+                return Err(error.to_string());
+            }
+        }
+    };
+    let render_and_encode_seconds = start.elapsed().as_secs_f64();
+    if status.progress.phase != Phase::Completed {
+        return Err(status.error.map_or_else(|| "render did not complete".into(), |e| e.to_string()));
+    }
+    let exported = session.execute("render.export", &json!({"job":id,"path":output_path,"overwrite":true})).map_err(|e| e.to_string())?;
+    let report = json!({
+        "recipe":recipe_path,"render_params":params,"executor":executor,"adapter":adapter_report,
+        "environment":{"SOLIDCRAFT_GPU":std::env::var("SOLIDCRAFT_GPU").ok(),"WGPU_BACKEND":std::env::var("WGPU_BACKEND").ok()},
+        "cad_generation_seconds":generation_seconds,"cpu_host_setup_seconds":cpu_host_seconds,"gpu_host_setup_seconds":gpu_host_seconds,
+        "render_and_encode_seconds":render_and_encode_seconds,
+        "timing_scope":"wall time from render.start through completed PNG encoding; includes job preparation and readback, excludes CAD generation, preflight and initial CPU/GPU host setup; GPU setup timing includes adapter selection and pipelines when requested",
+        "bodies":bodies,"commands":commands,"command_timings":command_timings,
+        "preflight":preflight,"export":exported,"editable_design":design_path
+    });
+    std::fs::write(output.with_extension("json"), serde_json::to_vec_pretty(&report).map_err(|e| e.to_string())?).map_err(|e| e.to_string())?;
+    println!("{}", serde_json::to_string_pretty(&report).map_err(|e| e.to_string())?);
+    Ok(())
+}
+
+fn main() -> Result<(), String> {
+    run()
+}

apps/solidcraft-cli/src/bench_agent.rs

@@ -36,8 +36,9 @@ impl Script {
         );
     }
 
+    /// A part placed after it is built: free, even as the design's first part (#2804).
     fn component(&mut self, name: &str) {
-        self.c("component.create", json!({"name": name}));
+        self.c("component.create", json!({"name": name, "grounded": false}));
     }
 
     fn root(&mut self) {

apps/solidcraft-cli/src/bench_assistant.rs

@@ -0,0 +1,701 @@
+//! `bench-assistant`: the standard Assistant model test (v1, #4851), run against a desktop app.
+//!
+//! The app is already running with `--control PORT`; everything goes through its control channel
+//! (`docs/control-protocol.md`), so the command needs no window code of its own. For each task it
+//! starts a new design, runs the task's prescribed setup (a box, for some), adds the endpoint as an
+//! API agent with All permissions, starts a new chat, sends the prompt once and waits for the turn
+//! to end. The result is checked on the design (`document.inspect` with measurements), never on
+//! what the model says, except for the one question whose answer is the reply. A failed task is
+//! put in one of the issue's failure categories from the conversation's items.
+//!
+//! ```text
+//! solidcraft-cli bench-assistant --connect 127.0.0.1:PORT --base-url URL --model NAME
+//!     [--token T] [--tasks 1,2,5] [--repeat N] [--timeout-s 300]
+//!     [--json out.json] [--markdown out.md]
+//! ```
+//! prints a table of the results; `--markdown` writes the issue's comment template filled in,
+//! `--json` every task's rules, conversation and design before and after.
+
+use std::io::{BufRead, BufReader, Write};
+use std::net::{SocketAddr, TcpStream};
+use std::time::{Duration, Instant};
+
+use serde_json::{Value, json};
+
+/// Standard test v1, as #4851 states it. Changing a prompt or a rule makes it another test.
+const TASKS: &str = r#"[
+  {"id": "01-cube", "prompt": "Make a 20 mm cube.", "check": {"bodies": 1, "volume": 8000, "bbox_size": [20, 20, 20]}},
+  {"id": "02-cylinder", "prompt": "Make a cylinder 30 mm in diameter and 50 mm tall.", "check": {"bodies": 1, "volume": 35342.92, "bbox_size": [30, 30, 50]}},
+  {"id": "03-block", "prompt": "Create a block 60 mm long, 40 mm wide and 10 mm thick.", "check": {"bodies": 1, "volume": 24000, "bbox_size": [10, 40, 60]}},
+  {"id": "04-sketch-extrude", "prompt": "Sketch a 50 by 30 mm rectangle on the XY plane and extrude it 15 mm.", "check": {"bodies": 1, "volume": 22500, "bbox_size": [15, 30, 50], "feature_kinds": ["Extrude"]}},
+  {"id": "05-plate-hole", "prompt": "Make a plate 80 x 60 x 10 mm with a 20 mm diameter hole straight through the middle.", "check": {"bodies": 1, "volume": 44858.41, "bbox_size": [10, 60, 80], "note": "80*60*10 - pi*10^2*10"}},
+  {"id": "06-fillet-box", "prompt": "Round all the edges of the box with a 3 mm radius.", "setup": [{"command": "solid.box", "params": {"length": 40, "width": 40, "height": 40}}], "check": {"bodies": 1, "volume": 63108.53, "tol": 0.003, "feature_kinds": ["Fillet"], "note": "all 12 edges of a 40 mm cube rounded r=3"}},
+  {"id": "07-move-body", "prompt": "Move the box 50 mm along the X axis.", "setup": [{"command": "solid.box", "params": {"length": 20, "width": 20, "height": 20}}], "check": {"bodies": 1, "volume": 8000, "bbox_min": [50, 0, 0]}},
+  {"id": "08-rename-body", "prompt": "Rename the body to Bracket.", "setup": [{"command": "solid.box", "params": {"length": 30, "width": 20, "height": 10}}], "check": {"bodies": 1, "volume": 6000, "body_name": "Bracket"}},
+  {"id": "09-volume-question", "prompt": "What is the volume of the part?", "setup": [{"command": "solid.box", "params": {"length": 30, "width": 20, "height": 10}}], "check": {"bodies": 1, "volume": 6000, "unchanged": true, "reply_number": "6[ ,. ]?000(?![0-9])|6(\\.0+)? ?cm"}},
+  {"id": "10-two-holes", "prompt": "Make a 100 x 50 x 5 mm plate and drill two 10 mm holes through it, each 15 mm in from the short ends and centred across the width.", "check": {"bodies": 1, "volume": 24214.6, "bbox_size": [5, 50, 100], "note": "100*50*5 - 2*pi*5^2*5"}},
+  {"id": "11-any-change", "prompt": "can you use the software to make a change to the current shape, any change at all", "setup": [{"command": "solid.box", "params": {"length": 30, "width": 20, "height": 10}}], "check": {"changed": true, "note": "verbatim user prompt from #4846; pass = the design changed"}}
+]"#;
+
+/// The agent the test adds. A fixed id replaces it on every run instead of adding another.
+const AGENT_ID: &str = "api-bench-assistant";
+const AGENT_NAME: &str = "bench";
+/// Longest control reply read (the channel's own request limit).
+const MAX_REPLY: usize = 16 << 20;
+/// Most result data kept for `--json`.
+const MAX_RESULTS: usize = 64 << 20;
+/// Deadline of the requests that only set up or read (each is answered at once by the app).
+const REQUEST_TIMEOUT: Duration = Duration::from_secs(120);
+/// How often a running turn is polled.
+const POLL: Duration = Duration::from_millis(250);
+/// After this long, an idle chat with no reply yet counts as a turn that ended without one.
+const START_GRACE: Duration = Duration::from_secs(30);
+/// Absolute tolerance of the lowest corner, in millimetres.
+const MIN_CORNER_TOL: f64 = 0.05;
+
+/// A JSON-lines connection to the app. Requests are sent once; a lost reply is never retried,
+/// so nothing runs twice.
+struct Control {
+    addr: SocketAddr,
+    token: String,
+    reader: BufReader<TcpStream>,
+    id: u64,
+}
+
+impl Control {
+    fn connect(addr: &str, token: Option<&str>) -> Result<Self, String> {
+        let addr: SocketAddr = addr.parse().map_err(|_| format!("--connect: `{addr}` is not an IP address and port"))?;
+        if !addr.ip().is_loopback() || addr.port() == 0 {
+            return Err("--connect requires a loopback address and a nonzero port (the app listens on 127.0.0.1)".into());
+        }
+        let token = solidcraft_engine::control_auth::client_token(addr.port(), token)
+            .map(|t| t.token)
+            .ok_or("no control token: pass --token, set SOLIDCRAFT_CONTROL_TOKEN, or run on the app's computer (its token file)")?;
+        if token.len() > 4096 {
+            return Err("the control token is longer than 4096 bytes".into());
+        }
+        Self::open(addr, token)
+    }
+
+    fn open(addr: SocketAddr, token: String) -> Result<Self, String> {
+        let stream = TcpStream::connect_timeout(&addr, Duration::from_secs(5)).map_err(|e| format!("connecting to {addr}: {e}"))?;
+        Ok(Self { addr, token, reader: BufReader::new(stream), id: 0 })
+    }
+
+    /// A new connection to the same app: a request that outlived its deadline keeps the old one
+    /// busy until it is answered.
+    fn reopen(&self) -> Result<Self, String> {
+        Self::open(self.addr, self.token.clone())
+    }
+
+    fn call(&mut self, method: &str, params: Value, deadline: Instant) -> Result<Value, String> {
+        let left = || deadline.checked_duration_since(Instant::now()).filter(|d| !d.is_zero()).ok_or_else(|| "timeout".to_string());
+        let io = |e: std::io::Error| match e.kind() {
+            std::io::ErrorKind::TimedOut | std::io::ErrorKind::WouldBlock => "timeout".to_string(),
+            _ => format!("control channel: {e}"),
+        };
+        self.reader.get_ref().set_write_timeout(Some(left()?)).map_err(io)?;
+        self.id += 1;
+        // The first request on a connection carries the token; sending it on every one is allowed.
+        let request = json!({"id": self.id, "method": method, "params": params, "token": self.token});
+        writeln!(self.reader.get_mut(), "{request}").map_err(io)?;
+        let mut line = Vec::new();
+        loop {
+            self.reader.get_ref().set_read_timeout(Some(left()?)).map_err(io)?;
+            let bytes = self.reader.fill_buf().map_err(io)?;
+            if bytes.is_empty() {
+                return Err("the app closed the control connection".into());
+            }
+            let newline = bytes.iter().position(|b| *b == b'\n');
+            let used = newline.map_or(bytes.len(), |n| n + 1);
+            if line.len() + used > MAX_REPLY {
+                return Err("a control reply is larger than 16 MiB".into());
+            }
+            line.extend_from_slice(bytes.get(..used).unwrap_or_default());
+            self.reader.consume(used);
+            if newline.is_some() {
+                break;
+            }
+        }
+        let reply: Value = serde_json::from_slice(&line).map_err(|e| format!("control reply: {e}"))?;
+        if reply["id"].as_u64() != Some(self.id) {
+            return Err("control reply for another request".into());
+        }
+        if reply["ok"] != true {
+            return Err(format!("{method}: {}", reply["error"].as_str().unwrap_or("failed")));
+        }
+        reply.get("result").cloned().ok_or_else(|| format!("{method}: reply without a result"))
+    }
+
+    fn execute(&mut self, command: &str, params: Value) -> Result<Value, String> {
+        self.call("engine.execute", json!({"command": command, "params": params, "animate": false}), Instant::now() + REQUEST_TIMEOUT)
+    }
+
+    fn chat(&mut self, params: Value) -> Result<Value, String> {
+        self.call("ui.agent_chat", params, Instant::now() + REQUEST_TIMEOUT)
+    }
+
+    fn inspect(&mut self) -> Result<Value, String> {
+        let design = self.call("document.inspect", json!({"measure": true}), Instant::now() + REQUEST_TIMEOUT)?;
+        if design.is_object() { Ok(design) } else { Err("document.inspect returned no design".into()) }
+    }
+}
+
+fn tasks() -> Result<Vec<Value>, String> {
+    serde_json::from_str(TASKS).map_err(|e| format!("embedded tasks: {e}"))
+}
+
+fn triple(value: &Value) -> Option<[f64; 3]> {
+    match value.as_array()?.as_slice() {
+        [x, y, z] => {
+            let n = |v: &Value| v.as_f64().filter(|n| n.is_finite());
+            Some([n(x)?, n(y)?, n(z)?])
+        }
+        _ => None,
+    }
+}
+
+/// What the model said (thoughts left out).
+fn reply(items: &[Value]) -> String {
+    items.iter().filter(|i| i["thought"] != true).filter_map(|i| i["agent"].as_str()).collect::<Vec<_>>().join("\n")
+}
+
+/// v1's reply pattern `6[ ,. ]?000(?![0-9])|6(\.0+)? ?cm`: "6000", "6 000", "6,000", "6.000" not
+/// followed by a digit, or "6 cm", "6.0cm", … (a narrow no-break space also separates thousands).
+fn volume_reply(text: &str) -> bool {
+    text.match_indices('6').any(|(at, _)| {
+        let tail = text.get(at + 1..).unwrap_or_default();
+        let thousands = |t: &str| t.strip_prefix("000").is_some_and(|rest| !rest.starts_with(|c: char| c.is_ascii_digit()));
+        let separated = tail.strip_prefix([' ', ',', '.', '\u{202f}']).is_some_and(thousands);
+        let cm = {
+            let t = tail.strip_prefix(".0").map_or(tail, |t| t.trim_start_matches('0'));
+            t.strip_prefix(' ').unwrap_or(t).starts_with("cm")
+        };
+        thousands(tail) || separated || cm
+    })
+}
+
+/// The design as the user sees it, without what reading or saving changes (path, saved state,
+/// revision, selection, undo depth, evaluation timings).
+fn content(design: &Value) -> Value {
+    let mut v = design.clone();
+    if let Some(o) = v.as_object_mut() {
+        for key in ["path", "dirty", "revision", "selection", "undo", "redo"] {
+            o.remove(key);
+        }
+    }
+    for feature in v.get_mut("timeline").and_then(Value::as_array_mut).into_iter().flatten() {
+        if let Some(o) = feature.as_object_mut() {
+            o.remove("ms");
+            o.remove("boolean_diagnostics");
+        }
+    }
+    v
+}
+
+/// Whether the design changed: its content, or a step on the undo stack (a colour, say, that the
+/// inspection does not list).
+fn changed(before: &Value, after: &Value) -> bool {
+    content(before) != content(after) || after["undo"].as_u64() > before["undo"].as_u64()
+}
+
+/// The rules a task's result breaks (none: it passed). `before` and `after` are
+/// `document.inspect {measure: true}` before the prompt and after the turn.
+pub(super) fn check(rule: &Value, before: &Value, after: &Value, items: &[Value]) -> Vec<String> {
+    let Some(all) = after["bodies"].as_array() else { return vec!["the design could not be read".into()] };
+    // Bodies the user sees; a hidden one (a tool body, a hidden original) is not the result.
+    let bodies: Vec<&Value> = all.iter().filter(|b| b["visible"] != false).collect();
+    let mut errors = Vec::new();
+    if let Some(n) = rule["bodies"].as_u64()
+        && bodies.len() as u64 != n
+    {
+        errors.push(format!("{} bodies, expected {n}", bodies.len()));
+    }
+    if let Some(expected) = rule["volume"].as_f64() {
+        let tol = rule["tol"].as_f64().unwrap_or(0.01);
+        let volumes: Vec<f64> = bodies.iter().filter_map(|b| b["volume_mm3"].as_f64()).filter(|v| v.is_finite()).collect();
+        let total: f64 = volumes.iter().sum();
+        if volumes.len() != bodies.len() || (total - expected).abs() > expected * tol {
+            errors.push(format!("volume {total:.1} mm³, expected {expected} mm³ ±{}%", tol * 100.0));
+        }
+    }
+    let first = bodies.first().copied().unwrap_or(&Value::Null);
+    let min = triple(&first["bbox"]["min"]);
+    if let Some(mut expected) = triple(&rule["bbox_size"]) {
+        expected.sort_by(f64::total_cmp);
+        let size = min.zip(triple(&first["bbox"]["max"])).map(|(lo, hi)| {
+            let mut size = [hi[0] - lo[0], hi[1] - lo[1], hi[2] - lo[2]];
+            size.sort_by(f64::total_cmp);
+            size
+        });
+        if !size.is_some_and(|s| s.iter().zip(expected).all(|(a, e)| (a - e).abs() <= 0.01 * e.max(1.0))) {
+            errors.push(format!("size {size:?}, expected {expected:?} in any orientation"));
+        }
+    }
+    if let Some(expected) = triple(&rule["bbox_min"])
+        && !min.is_some_and(|m| m.iter().zip(expected).all(|(a, e)| (a - e).abs() <= MIN_CORNER_TOL))
+    {
+        errors.push(format!("lowest corner {min:?}, expected {expected:?}"));
+    }
+    if let Some(name) = rule["body_name"].as_str()
+        && !bodies.iter().any(|b| b["name"] == name)
+    {
+        errors.push(format!("no body named {name}"));
+    }
+    for kind in rule["feature_kinds"].as_array().into_iter().flatten().filter_map(Value::as_str) {
+        let live = |f: &&Value| f["suppressed"] != true && f["rolled_back"] != true && f["error"].is_null();
+        if !after["timeline"].as_array().into_iter().flatten().filter(live).any(|f| f["type"].as_str().is_some_and(|t| t.contains(kind))) {
+            errors.push(format!("no {kind} in the timeline"));
+        }
+    }
+    if rule["changed"] == true || rule["unchanged"] == true {
+        let changed = before.is_object() && changed(before, after);
+        if rule["changed"] == true && !changed {
+            errors.push("the design did not change".into());
+        }
+        if rule["unchanged"] == true && (changed || !before.is_object()) {
+            errors.push("the design changed".into());
+        }
+    }
+    if rule["reply_number"].is_string() && !volume_reply(&reply(items)) {
+        errors.push("the reply does not give the volume".into());
+    }
+    errors
+}
+
+/// A tool call written into the reply as JSON: `{"name": …`, `{"command": …`, `{"function": …`,
+/// `{"tool": …`.
+fn call_as_text(text: &str) -> bool {
+    text.match_indices('{').any(|(at, _)| {
+        let rest = text.get(at + 1..).unwrap_or_default().trim_start();
+        ["\"name\"", "\"command\"", "\"function\"", "\"tool\""]
+            .iter()
+            .any(|key| rest.strip_prefix(key).is_some_and(|r| r.trim_start().starts_with(':')))
+    })
+}
+
+/// How a failed task failed, in the issue's words, from the conversation's items.
+pub(super) fn classify(items: &[Value], timed_out: bool) -> &'static str {
+    if timed_out {
+        return "timeout";
+    }
+    let tools: Vec<&Value> = items.iter().filter(|i| i.get("tool").is_some()).collect();
+    // A failed call, or a batch whose answer reports a failed step (`"ok": false`).
+    let failed: Vec<String> = tools
+        .iter()
+        .map(|t| t["output"].as_str().unwrap_or_default())
+        .zip(&tools)
+        .filter(|(output, t)| t["status"] == "Failed" || serde_json::from_str::<Value>(output).is_ok_and(|v| v["ok"] == false))
+        .map(|(output, _)| output.to_lowercase())
+        .collect();
+    let notices: Vec<String> = items.iter().filter_map(|i| i["notice"].as_str()).map(str::to_lowercase).collect();
+    let answer = reply(items);
+    if notices.iter().any(|n| n.contains("http 400")) {
+        return "the endpoint refused tools (HTTP 400)";
+    }
+    if notices.iter().any(|n| n.contains("max_turn_requests")) || answer.contains("requests for one message") {
+        return "hit the request limit";
+    }
+    if call_as_text(&answer) {
+        return "wrote the call as text";
+    }
+    if failed.iter().any(|o| o.contains("unknown command") || o.starts_with("unknown tool")) {
+        return "wrong or unknown command";
+    }
+    if failed.iter().any(|o| o.contains("invalid parameters") || o.starts_with("not run:") || o.contains("not valid json")) {
+        return "wrong arguments";
+    }
+    if !failed.is_empty() || notices.iter().any(|n| n.starts_with("http ")) || items.iter().any(|i| i["error"] == true) {
+        return "gave up after errors";
+    }
+    if tools.is_empty() {
+        return if answer.trim().is_empty() { "an empty reply" } else { "only talked" };
+    }
+    "wrong result"
+}
+
+/// One run's results in the issue's comment template (`run`: which repetition).
+pub(super) fn markdown(model: &str, version: &str, results: &[Value], run: u64) -> String {
+    let clean = |s: &str| s.replace(['\n', '\r', '|'], " ");
+    let rows: Vec<&Value> = results.iter().filter(|r| r["repeat"] == run).collect();
+    let passed = rows.iter().filter(|r| r["passed"] == true).count();
+    let mut out = format!(
+        "### {} (<quant>, <download size>)\nRuntime: <Ollama/LM Studio/... version>, context <num_ctx if changed>\nSolidCraft: {}\nResult: {passed}/11\n| # | pass/fail | how it failed |\n|---|---|---|\n",
+        clean(model),
+        clean(version)
+    );
+    for n in 1..=11 {
+        match rows.iter().find(|r| r["task"] == n) {
+            Some(r) if r["passed"] == true => out.push_str(&format!("| {n} | pass | |\n")),
+            Some(r) => out.push_str(&format!("| {n} | fail | {} |\n", clean(r["failure"].as_str().unwrap_or_default()))),
+            None => out.push_str(&format!("| {n} | | not run |\n")),
+        }
+    }
+    out.push_str(if rows.len() == 11 {
+        "Notes: <anything odd, e.g. very slow, needed a retry>\n"
+    } else {
+        "Notes: partial run; the tasks marked \"not run\" were left out.\n"
+    });
+    out
+}
+
+fn write(path: &str, text: &str) -> Result<(), String> {
+    solidcraft_engine::io::vfs::write(path, text.as_bytes()).map_err(|e| format!("{path}: {e}"))
+}
+
+struct Options<'a> {
+    connect: &'a str,
+    token: Option<&'a str>,
+    base_url: &'a str,
+    model: &'a str,
+    tasks: Vec<usize>,
+    repeat: u64,
+    timeout: Duration,
+    json: Option<&'a str>,
+    markdown: Option<&'a str>,
+}
+
+fn options(args: &[String]) -> Result<Options<'_>, String> {
+    const FLAGS: [&str; 9] = ["--connect", "--token", "--base-url", "--model", "--tasks", "--repeat", "--timeout-s", "--json", "--markdown"];
+    let mut given = std::collections::BTreeMap::new();
+    let mut args = args.iter();
+    while let Some(flag) = args.next() {
+        let Some(flag) = FLAGS.iter().find(|f| **f == flag.as_str()) else { return Err(format!("unknown bench-assistant option: {flag}")) };
+        let value = args
+            .next()
+            .filter(|v| !v.starts_with("--") && !v.is_empty() && v.len() <= 4096)
+            .ok_or_else(|| format!("{flag} needs a value (at most 4096 bytes)"))?;
+        if given.insert(*flag, value.as_str()).is_some() {
+            return Err(format!("{flag} given twice"));
+        }
+    }
+    let required = |key: &str| given.get(key).copied().ok_or_else(|| format!("bench-assistant needs {key}"));
+    let number = |key: &str, default: u64, max: u64| -> Result<u64, String> {
+        given
+            .get(key)
+            .map_or(Ok(default), |s| s.parse::<u64>().ok().filter(|n| (1..=max).contains(n)).ok_or_else(|| format!("{key} must be 1 to {max}")))
+    };
+    let tasks = match given.get("--tasks") {
+        None => (1..=11).collect(),
+        Some(list) => {
+            let mut tasks = Vec::new();
+            for n in list.split(',') {
+                let n = n
+                    .trim()
+                    .parse::<usize>()
+                    .ok()
+                    .filter(|n| (1..=11).contains(n))
+                    .ok_or("--tasks takes task numbers 1 to 11, separated by commas")?;
+                if tasks.contains(&n) {
+                    return Err(format!("--tasks lists task {n} twice"));
+                }
+                tasks.push(n);
+            }
+            tasks
+        }
+    };
+    Ok(Options {
+        connect: required("--connect")?,
+        token: given.get("--token").copied(),
+        base_url: required("--base-url")?,
+        model: required("--model")?,
+        tasks,
+        repeat: number("--repeat", 1, 100)?,
+        timeout: Duration::from_secs(number("--timeout-s", 300, 3600)?),
+        json: given.get("--json").copied(),
+        markdown: given.get("--markdown").copied(),
+    })
+}
+
+/// Waits for the turn the prompt started to end. Returns the chat's last state and whether the
+/// deadline passed first.
+fn wait_for_turn(control: &mut Control, mut chat: Value, began: Instant, end: Instant) -> Result<(Value, bool), String> {
+    let mut seen_busy = false;
+    loop {
+        let state = chat["state"].as_str().unwrap_or_default();
+        let turn = !chat["turn"].is_null();
+        let queued = chat["pending"].as_array().is_some_and(|p| !p.is_empty());
+        seen_busy |= state == "busy" || turn;
+        let idle = !matches!(state, "busy" | "starting") && !turn && !queued;
+        // A turn can start and end between two polls: then the conversation has its answer.
+        let answered = chat["items"].as_array().into_iter().flatten().any(|i| i.get("user").is_none());
+        if idle && (seen_busy || answered || matches!(state, "exited" | "auth" | "off") || began.elapsed() >= START_GRACE) {
+            return Ok((chat, false));
+        }
+        let Some(left) = end.checked_duration_since(Instant::now()).filter(|d| !d.is_zero()) else { return Ok((chat, true)) };
+        std::thread::sleep(POLL.min(left));
+        match control.call("ui.agent_chat", json!({}), end) {
+            Ok(next) => chat = next,
+            Err(e) if e == "timeout" => return Ok((chat, true)),
+            Err(e) => return Err(e),
+        }
+    }
+}
+
+pub fn run(args: &[String]) -> Result<(), String> {
+    let o = options(args)?;
+    let tasks = tasks()?;
+    let mut control = Control::connect(o.connect, o.token)?;
+    let help = control.call("ui.help", json!({}), Instant::now() + REQUEST_TIMEOUT)?;
+    let version = help["version"].as_str().filter(|s| !s.is_empty() && s.len() <= 256).ok_or("the app reported no version")?.to_string();
+    let config = control.chat(json!({
+        "features": true,
+        "add_agent": {"id": AGENT_ID, "name": AGENT_NAME, "kind": "api", "base_url": o.base_url, "model": o.model},
+    }))?;
+    if !config["agents"].as_array().into_iter().flatten().any(|a| a["id"] == AGENT_ID) {
+        return Err("the app did not add the benchmark's agent".into());
+    }
+    // Put the user's permission setting back afterwards.
+    let permissions = config["permissions"].as_str().map(str::to_string);
+    let result = run_tasks(&mut control, &o, &tasks, &version);
+    let _ = control.chat(json!({"stop": true}));
+    if let Some(p) = permissions {
+        let _ = control.chat(json!({"permissions": p}));
+    }
+    result
+}
+
+fn run_tasks(control: &mut Control, o: &Options, tasks: &[Value], version: &str) -> Result<(), String> {
+    let mut results: Vec<Value> = Vec::new();
+    let mut kept = 0;
+    let mut stdout = std::io::stdout().lock();
+    let mut say = |line: String| writeln!(stdout, "{line}").map_err(|e| format!("stdout: {e}"));
+    say(format!("bench-assistant v1: {} on SolidCraft {version}", o.model))?;
+    say("| run | # | task | pass/fail | how it failed | seconds |\n|---|---|---|---|---|---|".into())?;
+    for run in 1..=o.repeat {
+        for &n in &o.tasks {
+            let task = tasks.get(n - 1).ok_or("missing embedded task")?;
+            // A fresh design and a fresh chat, with nothing of the last task still running.
+            control.chat(json!({"stop": true}))?;
+            control.execute("file.new", json!({"name": "Benchmark"}))?;
+            for step in task["setup"].as_array().into_iter().flatten() {
+                control.execute(step["command"].as_str().ok_or("embedded setup without a command")?, step["params"].clone())?;
+            }
+            control.chat(json!({"agent": AGENT_ID, "permissions": "all", "new_chat": true, "attach_view": false}))?;
+            let before = control.inspect()?;
+            let began = Instant::now();
+            let end = began + o.timeout;
+            let (chat, timed_out) = match control.call("ui.agent_chat", json!({"send": task["prompt"]}), end) {
+                Ok(chat) => wait_for_turn(control, chat, began, end)?,
+                Err(e) if e == "timeout" => (json!({}), true),
+                Err(e) => return Err(e),
+            };
+            if timed_out {
+                // The late reply would arrive on the old connection; stop the model on a new one
+                // before reading the design.
+                *control = control.reopen()?;
+            }
+            // Stop the agent before reading the result, so nothing changes the design meanwhile.
+            let stopped = control.chat(json!({"stop": true}))?;
+            let items = stopped["items"].as_array().or(chat["items"].as_array()).cloned().unwrap_or_default();
+            let after = control.inspect()?;
+            let failed_rules = check(&task["check"], &before, &after, &items);
+            let passed = failed_rules.is_empty();
+            let failure = if passed { "" } else { classify(&items, timed_out) };
+            let seconds = began.elapsed().as_secs_f64();
+            say(format!(
+                "| {run} | {n} | {} | {} | {failure} | {seconds:.0} |",
+                task["id"].as_str().unwrap_or_default(),
+                if passed { "pass" } else { "fail" }
+            ))?;
+            let result = json!({
+                "task": n, "id": task["id"], "prompt": task["prompt"], "repeat": run, "passed": passed, "failure": failure,
+                "failed_rules": failed_rules, "timed_out": timed_out, "seconds": seconds, "check": task["check"],
+                "items": items, "before": before, "after": after,
+            });
+            kept += result.to_string().len();
+            if kept > MAX_RESULTS {
+                return Err("the results passed 64 MiB; run fewer tasks or repetitions".into());
+            }
+            results.push(result);
+            // Written after every task, so an interrupted run keeps what it measured.
+            if let Some(path) = o.json {
+                let all = json!({"test": "v1", "model": o.model, "base_url": o.base_url, "solidcraft": version, "results": results});
+                write(path, &serde_json::to_string_pretty(&all).map_err(|e| e.to_string())?)?;
+            }
+            if let Some(path) = o.markdown {
+                write(path, &(1..=run).map(|r| markdown(o.model, version, &results, r)).collect::<Vec<_>>().join("\n"))?;
+            }
+        }
+    }
+    for run in 1..=o.repeat {
+        let rows: Vec<&Value> = results.iter().filter(|r| r["repeat"] == run).collect();
+        say(format!("run {run}: {}/{} passed", rows.iter().filter(|r| r["passed"] == true).count(), rows.len()))?;
+    }
+    Ok(())
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    fn design(bodies: Value, timeline: Value) -> Value {
+        json!({"name": "Benchmark", "params": [], "timeline": timeline, "bodies": bodies, "sketches": [], "undo": 1, "revision": 3, "dirty": true})
+    }
+
+    fn body(name: &str, volume: f64, min: [f64; 3], max: [f64; 3]) -> Value {
+        json!({"name": name, "volume_mm3": volume, "bbox": {"min": min, "max": max}, "visible": true})
+    }
+
+    #[test]
+    fn the_embedded_tasks_are_v1() {
+        let tasks = tasks().unwrap();
+        assert_eq!(tasks.len(), 11);
+        assert_eq!(tasks[0]["prompt"], "Make a 20 mm cube.");
+        assert_eq!(tasks[10]["prompt"], "can you use the software to make a change to the current shape, any change at all");
+        assert_eq!(tasks[5]["check"]["tol"], 0.003);
+        assert_eq!(tasks[6]["check"]["bbox_min"], json!([50, 0, 0]));
+        let boxes: Vec<_> = tasks.iter().filter(|t| t["setup"].is_array()).map(|t| t["id"].as_str().unwrap()).collect();
+        assert_eq!(boxes, ["06-fillet-box", "07-move-body", "08-rename-body", "09-volume-question", "11-any-change"]);
+    }
+
+    #[test]
+    fn pass_rules() {
+        let tasks = tasks().unwrap();
+        let rule = |n: usize| tasks[n - 1]["check"].clone();
+        let empty = design(json!([]), json!([]));
+        let pass = |n: usize, before: &Value, after: &Value, items: &[Value]| check(&rule(n), before, after, items);
+        // 3: any orientation, within 1%.
+        let block = design(json!([body("Body1", 24_100.0, [0.0; 3], [40.0, 10.0, 60.2])]), json!([{"type": "Box"}]));
+        assert!(pass(3, &empty, &block, &[]).is_empty());
+        let thick = design(json!([body("Body1", 24_000.0, [0.0; 3], [40.0, 12.0, 60.0])]), json!([]));
+        assert_eq!(pass(3, &empty, &thick, &[]).len(), 1);
+        let two = design(json!([body("A", 12_000.0, [0.0; 3], [60.0, 40.0, 5.0]), body("B", 12_000.0, [0.0; 3], [60.0, 40.0, 5.0])]), json!([]));
+        assert!(!pass(3, &empty, &two, &[]).is_empty());
+        // A hidden body is not part of the result.
+        let mut hidden = two.clone();
+        hidden["bodies"][1]["visible"] = json!(false);
+        hidden["bodies"][0]["volume_mm3"] = json!(24_000.0);
+        hidden["bodies"][0]["bbox"]["max"] = json!([60.0, 40.0, 10.0]);
+        assert!(pass(3, &empty, &hidden, &[]).is_empty());
+        // 4: the timeline needs a working Extrude.
+        let plate = |kind: Value| design(json!([body("Body1", 22_500.0, [0.0; 3], [50.0, 30.0, 15.0])]), kind);
+        assert!(pass(4, &empty, &plate(json!([{"type": "Sketch"}, {"type": "Extrude"}])), &[]).is_empty());
+        assert!(!pass(4, &empty, &plate(json!([{"type": "Box"}])), &[]).is_empty());
+        for flag in [json!({"suppressed": true}), json!({"rolled_back": true}), json!({"error": "failed"})] {
+            let mut feature = json!({"type": "Extrude"});
+            feature.as_object_mut().unwrap().extend(flag.as_object().unwrap().clone());
+            assert!(!pass(4, &empty, &plate(json!([feature])), &[]).is_empty(), "{flag}");
+        }
+        // 6: the fillet's tolerance is 0.3%.
+        let start = design(json!([body("Body1", 64_000.0, [0.0; 3], [40.0; 3])]), json!([{"type": "Box"}]));
+        let filleted = |v: f64| design(json!([body("Body1", v, [0.0; 3], [40.0; 3])]), json!([{"type": "Box"}, {"type": "Fillet"}]));
+        assert!(pass(6, &start, &filleted(63_108.53 * 1.002), &[]).is_empty());
+        assert!(!pass(6, &start, &filleted(63_108.53 * 1.004), &[]).is_empty());
+        // 7: the lowest corner.
+        let moved = |x: f64| design(json!([body("Body1", 8000.0, [x, 0.0, 0.0], [x + 20.0, 20.0, 20.0])]), json!([]));
+        assert!(pass(7, &empty, &moved(50.0), &[]).is_empty());
+        assert!(!pass(7, &empty, &moved(0.0), &[]).is_empty());
+        // 8: the name.
+        let named = |name: &str| design(json!([body(name, 6000.0, [0.0; 3], [30.0, 20.0, 10.0])]), json!([]));
+        assert!(pass(8, &empty, &named("Bracket"), &[]).is_empty());
+        assert!(!pass(8, &empty, &named("Body1"), &[]).is_empty());
+        // 9: unchanged, and the reply gives the volume.
+        let start = named("Body1");
+        let said = |text: &str| [json!({"user": "What is the volume of the part?"}), json!({"agent": text, "thought": false})];
+        let mut read = start.clone();
+        read["revision"] = json!(7);
+        read["dirty"] = json!(false);
+        read["selection"] = json!([{"body": "Body1"}]);
+        assert!(pass(9, &start, &read, &said("The volume is 6000 mm³.")).is_empty());
+        assert!(!pass(9, &start, &read, &said("About 60 cm³.")).is_empty());
+        assert!(!pass(9, &start, &named("Bracket"), &said("6 000 mm³")).is_empty());
+        let mut undone = start.clone();
+        undone["undo"] = json!(2);
+        assert!(!pass(9, &start, &undone, &said("6000 mm³")).is_empty());
+        // 11: any change counts; reading does not.
+        assert!(pass(11, &start, &named("Bracket"), &[]).is_empty());
+        assert!(pass(11, &start, &undone, &[]).is_empty());
+        assert!(!pass(11, &start, &read, &[]).is_empty());
+        // An unreadable design passes nothing.
+        assert!(!pass(11, &start, &json!({}), &[]).is_empty());
+    }
+
+    #[test]
+    fn the_volume_reply() {
+        for yes in ["6000", "6 000 mm³", "6,000", "6.000", "6\u{202f}000", "6 cm³", "6.00cm3", "is 6000."] {
+            assert!(volume_reply(yes), "{yes}");
+        }
+        for no in ["60000", "6,0001", "60 cm³", "600", "6.01 cm³", ""] {
+            assert!(!volume_reply(no), "{no}");
+        }
+    }
+
+    #[test]
+    fn failure_categories() {
+        for (items, expected) in [
+            (
+                json!([{"user": "Make a 20 mm cube."}, {"agent": "{\"name\": \"execute\", \"arguments\": {}}", "thought": false}]),
+                "wrote the call as text",
+            ),
+            (
+                json!([{"notice": "HTTP 400: registry.ollama.ai/library/gemma3:4b does not support tools", "error": true}]),
+                "the endpoint refused tools (HTTP 400)",
+            ),
+            (json!([{"user": "Make a 20 mm cube."}, {"agent": "", "thought": false}]), "an empty reply"),
+            (json!([{"agent": "Let me think", "thought": true}]), "an empty reply"),
+            (json!([{"agent": "Sure, here is how to make a cube.", "thought": false}]), "only talked"),
+            (
+                json!([{"tool": "1", "status": "Failed", "output": "unknown command `solid.cube` (did you mean `solid.box`?)"}]),
+                "wrong or unknown command",
+            ),
+            (json!([{"tool": "1", "status": "Failed", "output": "unknown tool `make_cube`"}]), "wrong or unknown command"),
+            (json!([{"tool": "1", "status": "Failed", "output": "invalid parameters for `solid.box`: `length` is required"}]), "wrong arguments"),
+            (json!([{"tool": "1", "status": "Failed", "output": "Not run: the tool arguments were not valid JSON"}]), "wrong arguments"),
+            (json!([{"tool": "1", "status": "Failed", "output": "no body `Box`"}]), "gave up after errors"),
+            (
+                json!([{"tool": "1", "status": "Completed", "output": "{\"ok\": false, \"failed\": {\"error\": \"unknown command `solid.delete`\"}}"}]),
+                "wrong or unknown command",
+            ),
+            (
+                json!([{"tool": "1", "status": "Completed"}, {"agent": "\n(stopped after 24 requests for one message; send another message to go on)"}]),
+                "hit the request limit",
+            ),
+            (json!([{"tool": "1", "status": "Completed", "output": "{}"}]), "wrong result"),
+        ] {
+            let items = items.as_array().unwrap();
+            assert_eq!(classify(items, false), expected, "{items:?}");
+            assert_eq!(classify(items, true), "timeout");
+        }
+    }
+
+    #[test]
+    fn markdown_is_the_comment_template() {
+        let rows: Vec<Value> =
+            (1..=11).map(|n| json!({"task": n, "repeat": 1, "passed": n != 2, "failure": if n == 2 { "an empty reply" } else { "" }})).collect();
+        let report = markdown("qwen2.5:7b", "0.19.0", &rows, 1);
+        assert!(report.starts_with(
+            "### qwen2.5:7b (<quant>, <download size>)\nRuntime: <Ollama/LM Studio/... version>, context <num_ctx if changed>\nSolidCraft: 0.19.0\nResult: 10/11\n| # | pass/fail | how it failed |\n|---|---|---|\n| 1 | pass | |\n| 2 | fail | an empty reply |\n"
+        ));
+        assert!(report.ends_with("| 11 | pass | |\nNotes: <anything odd, e.g. very slow, needed a retry>\n"));
+        let partial = markdown("m|x", "v", &rows[..1], 1);
+        assert!(partial.starts_with("### m x ("));
+        assert!(partial.contains("Result: 1/11") && partial.contains("| 2 | | not run |") && partial.contains("partial run"));
+    }
+
+    #[test]
+    fn options_are_checked_before_connecting() {
+        for extra in [
+            &["--repeat", "0"][..],
+            &["--repeat", "101"],
+            &["--timeout-s", "3601"],
+            &["--tasks", "0"],
+            &["--tasks", "12"],
+            &["--tasks", "1,1"],
+            &["--model", "again"],
+            &["--unexpected", "1"],
+            &["--token"],
+        ] {
+            let mut args: Vec<String> =
+                ["--connect", "127.0.0.1:9", "--model", "m", "--base-url", "http://127.0.0.1:11434/v1"].iter().map(|s| s.to_string()).collect();
+            args.extend(extra.iter().map(|s| s.to_string()));
+            assert!(options(&args).is_err(), "{extra:?}");
+        }
+        let args: Vec<String> =
+            ["--connect", "127.0.0.1:9", "--model", "m", "--base-url", "u", "--tasks", "2, 5"].iter().map(|s| s.to_string()).collect();
+        let o = options(&args).unwrap();
+        assert_eq!((o.tasks, o.repeat, o.timeout), (vec![2, 5], 1, Duration::from_secs(300)));
+        assert!(Control::connect("10.0.0.1:9271", Some("t")).is_err());
+        assert!(Control::connect("localhost", Some("t")).is_err());
+    }
+}

apps/solidcraft-cli/src/crashes.rs

@@ -6,11 +6,14 @@ use std::sync::Mutex;
 use serde_json::{Value, json};
 use solidcraft_engine::crash;
 
-const USAGE: &str = "usage: solidcraft-cli crashes [list [--json] | show <id> | replay <id> | dir | clear [<id>]]";
+/// The command's usage, from the same lines the top-level usage lists.
+fn usage() -> String {
+    crate::command_usage("crashes")
+}
 
 pub fn run(args: &[String]) -> Result<(), String> {
     let dir = crash::default_dir().ok_or("no crash folder on this system")?;
-    let id = || args.get(1).map(String::as_str).ok_or_else(|| USAGE.to_string());
+    let id = || args.get(1).map(String::as_str).ok_or_else(usage);
     match args.first().map(String::as_str) {
         None | Some("list") => {
             let reports = crash::list(&dir);
@@ -43,7 +46,7 @@ pub fn run(args: &[String]) -> Result<(), String> {
             println!("deleted {} report(s)", crash::clear(&dir, args.get(1).map(String::as_str)));
             Ok(())
         }
-        _ => Err(USAGE.to_string()),
+        _ => Err(usage()),
     }
 }
 

apps/solidcraft-cli/src/fuzz.rs

@@ -16,9 +16,16 @@ fn flag<T: std::str::FromStr>(args: &[String], name: &str, default: T) -> T {
     args.iter().position(|a| a == name).and_then(|i| args.get(i + 1)).and_then(|v| v.parse().ok()).unwrap_or(default)
 }
 
+/// The options `fuzz` takes, and the ones that stand alone.
+const OPTIONS: &[&str] = &["--from", "--count", "--jobs", "--timeout", "--steps", "--out", "--report"];
+const SWITCHES: &[&str] = &["--minimise"];
+
 /// One seed: a design and a boolean case, as JSON on stdout (progress on stderr).
 pub fn one(args: &[String]) -> Result<(), String> {
     let seed: u64 = args.first().and_then(|s| s.parse().ok()).ok_or("fuzz-one <seed> [--steps N] [--minimise]")?;
+    // The seed is the first argument; the rest are options, and an option `fuzz-one` doesn't
+    // take is refused rather than ignored.
+    crate::known_args("fuzz-one", &args[1..], &["--steps"], SWITCHES, false)?;
     let steps = flag(args, "--steps", 8usize);
     let minimise = args.iter().any(|a| a == "--minimise");
     // Panics caught inside the kernel: harmless natively, fatal in the web build.
@@ -64,6 +71,9 @@ struct Job {
 /// Run seeds `--from`…`--from + --count` in `--jobs` processes, `--timeout` seconds each;
 /// write failing scripts to `--out` and a summary to `--report`.
 pub fn run(args: &[String]) -> Result<(), String> {
+    // An option `fuzz` doesn't take is refused before a seed runs: it would otherwise be
+    // ignored, and the run would go on for minutes with the wrong settings.
+    crate::known_args("fuzz", args, OPTIONS, SWITCHES, false)?;
     let from = flag(args, "--from", 0u64);
     let count = flag(args, "--count", 100u64);
     let last = from.checked_add(count.saturating_sub(1)).ok_or("seed range exceeds u64::MAX: reduce --from or --count")?;

apps/solidcraft-cli/src/main.rs

@@ -6,13 +6,16 @@
 //! solidcraft-cli script <design.solidcraft> [--out script.json]     the design's history as a command script
 //! solidcraft-cli bench-open <design.solidcraft | part.step> [--parse-only] [--save OUT.solidcraft] [--display LEVEL [--edit NAME EXPR]] [--ops script.json] loading timings as JSON lines
 //! solidcraft-cli bench-agent [--scale F] [--save F] [--script-out F] a ~1,300-body design built command by command, timed
+//! solidcraft-cli bench-assistant --connect 127.0.0.1:PORT [--token T] --base-url URL --model NAME [--tasks 1,2,5] [--repeat N]
+//!                                 [--timeout-s 300] [--json out.json] [--markdown out.md]
+//!                                                             the standard Assistant model test (#4851) on a running app
 //! solidcraft-cli snapshot <script|design> [--in design|part.step] --out shot.png [--width W] [--height H] [--view iso|front|top|…|NAME | --camera JSON] [--no-grid] [--no-axes]
 //!                                                             [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27]
 //! solidcraft-cli exec <command> [json-params]                 run one command on an empty design
 //! solidcraft-cli commands                                     the command registry as JSON
 //! solidcraft-cli recipe <recipe.json>                         translate an oracle recipe to a script
 //! solidcraft-cli oracle <case-dir>...                         replay recipes and compare with expected.json
-//! solidcraft-cli mcp [--in design|script] [--connect HOST:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]
+//! solidcraft-cli mcp [--headless] [--in design|script] [--connect HOST:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]
 //!                    [--param-check off|warn|strict]
 //!                                                             MCP server on stdio (docs/mcp.md)
 //! solidcraft-cli licences                                     SolidCraft's licence and the third-party licences
@@ -24,6 +27,7 @@
 #![forbid(unsafe_code)]
 
 mod bench_agent;
+mod bench_assistant;
 mod crashes;
 mod fuzz;
 mod logger;
@@ -42,57 +46,98 @@ mod app_icon;
 use solidcraft_engine::Session;
 use solidcraft_engine::view::Guides;
 
-const USAGE: &str = "usage:
-  solidcraft-cli run <script.json|design.solidcraft|part.step> [--in design.solidcraft|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]
-  solidcraft-cli run --in <design.solidcraft|part.step> [--out FILE]...
-      (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)
-      (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;
-       --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)
-  solidcraft-cli eval <script.json|design.solidcraft|part.step> [--json-out FILE]     (alias: inspect; or --in FILE)
-      (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,
-       as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)
-  solidcraft-cli script <design.solidcraft|script.json> [--out script.json]
-      (the design's history as a command script that eval and run replay)
-  solidcraft-cli bench-open <design.solidcraft | part.step> [--parse-only] [--save OUT.solidcraft] [--display LEVEL [--edit NAME EXPR]] [--ops script.json]
-      (--ops: after opening, run each command of the script and undo it, timing the command, the
-       evaluations it caused and the view it leaves: placing and meshing what changed)
-  solidcraft-cli bench-agent [--scale F] [--save design.solidcraft] [--script-out script.json]
-  solidcraft-cli snapshot <script|design> [--in design.solidcraft|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]
-      [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27]
-  solidcraft-cli snapshot --in <design.solidcraft|part.step> --out shot.png ...
-      (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;
-       --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;
-       --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);
-       --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;
-       --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside
-         it shows) and color #rrggbb, either or both, once per body;
-       --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body
-         is visible inside the material it meets; a later --body overrides it;
-       --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world
-         coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON)
-  solidcraft-cli render <script|design> --out image.png [--setup NAME] [--width W] [--height H] [--transparent] [--overwrite] [--timeout SECONDS]
-  solidcraft-cli exec <command> [json-params]
-  solidcraft-cli commands
-  solidcraft-cli recipe <recipe.json>
-  solidcraft-cli oracle <case-dir>... [--json]
-  solidcraft-cli fuzz [--from N] [--count N] [--jobs J] [--timeout S] [--steps N] [--minimise] [--out DIR] [--report FILE]
-  solidcraft-cli mcp [--in design.solidcraft|script.json] [--connect 127.0.0.1:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]
-                     [--param-check off|warn|strict]
-  solidcraft-cli crashes [list [--json] | show <id> | replay <id> | dir | clear [<id>]]
-  solidcraft-cli licences
-  solidcraft-cli gpu [--policy auto|hardware|software|cpu]
-      (the GPU adapters a headless render can open, best first, the one the policy picks and the tier it
-       lands on: gpu, gpu-software, or the CPU rasterizer (auto with no adapter, or cpu); the policy defaults
-       to SOLIDCRAFT_GPU, else auto; exits with an error when hardware or software finds no such adapter)
-  solidcraft-cli icon --out icon.png [--size 256] | --out icon.ico
-  --debug, with any command: what SolidCraft logs (why a body has no display plan, why a save left its
-      model cache out), on stderr; RUST_LOG=error|warn|info|debug|trace sets one level for every crate
-";
+/// One command the CLI takes: the name to type, the usage it prints for `--help`,
+/// and whether the top-level usage lists it (an alias answers to another command's name).
+struct Command {
+    name: &'static str,
+    usage: &'static str,
+    listed: bool,
+}
+
+/// `run`'s lines in the usage.
+const USAGE_RUN: &str = "  solidcraft-cli run <script.json|design.solidcraft|part.step> [--in design.solidcraft|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]\n  solidcraft-cli run --in <design.solidcraft|part.step> [--out FILE]...\n      (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n      (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n       --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n";
+/// `eval`'s lines in the usage.
+const USAGE_EVAL: &str = "  solidcraft-cli eval <script.json|design.solidcraft|part.step> [--json-out FILE]     (alias: inspect; or --in FILE)\n      (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n       as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n";
+/// `script`'s lines in the usage.
+const USAGE_SCRIPT: &str = "  solidcraft-cli script <design.solidcraft|script.json> [--out script.json]\n      (the design's history as a command script that eval and run replay)\n";
+/// `bench-open`'s lines in the usage.
+const USAGE_BENCH_OPEN: &str = "  solidcraft-cli bench-open <design.solidcraft | part.step> [--parse-only] [--save OUT.solidcraft] [--display LEVEL [--edit NAME EXPR]] [--ops script.json]\n      (--ops: after opening, run each command of the script and undo it, timing the command, the\n       evaluations it caused and the view it leaves: placing and meshing what changed)\n";
+/// `bench-agent`'s lines in the usage.
+const USAGE_BENCH_AGENT: &str = "  solidcraft-cli bench-agent [--scale F] [--save design.solidcraft] [--script-out script.json]\n";
+/// `bench-assistant`'s lines in the usage.
+const USAGE_BENCH_ASSISTANT: &str = "  solidcraft-cli bench-assistant --connect 127.0.0.1:PORT [--token T] --base-url URL --model NAME [--tasks 1,2,5] [--repeat N] [--timeout-s 300] [--json out.json] [--markdown out.md]\n";
+/// `snapshot`'s lines in the usage.
+const USAGE_SNAPSHOT: &str = "  solidcraft-cli snapshot <script|design> [--in design.solidcraft|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n      [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27]\n  solidcraft-cli snapshot --in <design.solidcraft|part.step> --out shot.png ...\n      (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n       --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n       --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n       --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n       --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n         it shows) and color #rrggbb, either or both, once per body;\n       --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n         is visible inside the material it meets; a later --body overrides it;\n       --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n         coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON)\n";
+/// `render`'s lines in the usage.
+const USAGE_RENDER: &str = "  solidcraft-cli render <script|design> --out image.png [--setup NAME] [--width W] [--height H] [--transparent] [--overwrite] [--timeout SECONDS]\n      [--progressive] [--samples N] [--max-depth N] [--seed N] [--exposure EV] [--lighting FILE.json] [--environment FILE.json] [--tone-map reinhard|aces_fitted]\n";
+/// `exec`'s lines in the usage.
+const USAGE_EXEC: &str = "  solidcraft-cli exec <command> [json-params]\n";
+/// `commands`'s lines in the usage.
+const USAGE_COMMANDS: &str = "  solidcraft-cli commands\n";
+/// `recipe`'s lines in the usage.
+const USAGE_RECIPE: &str = "  solidcraft-cli recipe <recipe.json>\n";
+/// `oracle`'s lines in the usage.
+const USAGE_ORACLE: &str = "  solidcraft-cli oracle <case-dir>... [--json]\n";
+/// `fuzz`'s lines in the usage.
+const USAGE_FUZZ: &str =
+    "  solidcraft-cli fuzz [--from N] [--count N] [--jobs J] [--timeout S] [--steps N] [--minimise] [--out DIR] [--report FILE]\n";
+/// `mcp`'s lines in the usage.
+const USAGE_MCP: &str = "  solidcraft-cli mcp [--headless] [--in design.solidcraft|script.json] [--connect 127.0.0.1:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]\n                     [--param-check off|warn|strict] [--render-gpu]\n";
+/// `crashes`'s lines in the usage.
+const USAGE_CRASHES: &str = "  solidcraft-cli crashes [list [--json] | show <id> | replay <id> | dir | clear [<id>]]\n";
+/// `licences`'s lines in the usage.
+const USAGE_LICENCES: &str = "  solidcraft-cli licences\n";
+/// `gpu`'s lines in the usage.
+const USAGE_GPU: &str = "  solidcraft-cli gpu [--policy auto|hardware|software|cpu]\n      (the GPU adapters a headless render can open, best first, the one the policy picks and the tier it\n       lands on: gpu, gpu-software, or the CPU rasterizer (auto with no adapter, or cpu); the policy defaults\n       to SOLIDCRAFT_GPU, else auto; exits with an error when hardware or software finds no such adapter)\n";
+/// `icon`'s lines in the usage.
+const USAGE_ICON: &str = "  solidcraft-cli icon --out icon.png [--size 256] | --out icon.ico\n";
+/// `fuzz-one`'s lines in the usage: a seed and the flags of one fuzz run.
+const USAGE_FUZZ_ONE: &str = "  solidcraft-cli fuzz-one <seed> [--steps N] [--minimise]\n";
+/// `bench-edit`'s lines in the usage: the parameter a script changes.
+const USAGE_BENCH_EDIT: &str = "  solidcraft-cli bench-edit <script.json|recipe.json> <param> <expr>\n";
+/// `save-stress`'s lines in the usage: the file saved over and over.
+const USAGE_SAVE_STRESS: &str = "  solidcraft-cli save-stress <path> <rounds>\n";
+/// The flags every command takes, at the end of the top-level usage.
+const USAGE_DEBUG: &str = "  --debug, with any command: what SolidCraft logs (why a body has no display plan, why a save left its\n      model cache out), on stderr; RUST_LOG=error|warn|info|debug|trace sets one level for every crate\n";
+
+/// The commands the CLI takes, in the order the top-level usage lists them.
+const COMMANDS: &[Command] = &[
+    Command { name: "run", usage: USAGE_RUN, listed: true },
+    Command { name: "eval", usage: USAGE_EVAL, listed: true },
+    Command { name: "inspect", usage: USAGE_EVAL, listed: false },
+    Command { name: "script", usage: USAGE_SCRIPT, listed: true },
+    Command { name: "bench-open", usage: USAGE_BENCH_OPEN, listed: true },
+    Command { name: "bench-agent", usage: USAGE_BENCH_AGENT, listed: true },
+    Command { name: "bench-assistant", usage: USAGE_BENCH_ASSISTANT, listed: true },
+    Command { name: "snapshot", usage: USAGE_SNAPSHOT, listed: true },
+    Command { name: "render", usage: USAGE_RENDER, listed: true },
+    Command { name: "exec", usage: USAGE_EXEC, listed: true },
+    Command { name: "commands", usage: USAGE_COMMANDS, listed: true },
+    Command { name: "recipe", usage: USAGE_RECIPE, listed: true },
+    Command { name: "oracle", usage: USAGE_ORACLE, listed: true },
+    Command { name: "fuzz", usage: USAGE_FUZZ, listed: true },
+    Command { name: "fuzz-one", usage: USAGE_FUZZ_ONE, listed: false },
+    Command { name: "mcp", usage: USAGE_MCP, listed: true },
+    Command { name: "crashes", usage: USAGE_CRASHES, listed: true },
+    Command { name: "licences", usage: USAGE_LICENCES, listed: true },
+    Command { name: "licenses", usage: USAGE_LICENCES, listed: false },
+    Command { name: "gpu", usage: USAGE_GPU, listed: true },
+    Command { name: "icon", usage: USAGE_ICON, listed: true },
+    Command { name: "bench-edit", usage: USAGE_BENCH_EDIT, listed: false },
+    Command { name: "save-stress", usage: USAGE_SAVE_STRESS, listed: false },
+];
 
 fn main() -> ExitCode {
     let mut args: Vec<String> = std::env::args().skip(1).collect();
     logger::init(&mut args);
     let r = match args.first().map(String::as_str) {
+        // Asked-for help is not an error: the command's usage on stdout, exit 0. It is read
+        // before the command runs, so `--help` never starts a run (a fuzz run, a server).
+        Some(cmd) if wants_help(&args[1..]) && is_command(cmd) => {
+            use std::io::Write as _;
+            let _ = std::io::stdout().lock().write_all(command_usage(cmd).as_bytes());
+            Ok(())
+        }
         Some("run") => cmd_run(&args[1..]),
         Some("eval" | "inspect") => cmd_eval(&args[1..]),
         Some("script") => cmd_script(&args[1..]),
@@ -113,7 +158,7 @@ fn main() -> ExitCode {
                 }
             })
         }
-        Some("recipe") => args.get(1).ok_or_else(|| USAGE.to_string()).and_then(|p| {
+        Some("recipe") => args.get(1).ok_or_else(usage).and_then(|p| {
             let v = read_json(p)?;
             recipe::to_script(&v).map(|s| println!("{}", pretty(&s)))
         }),
@@ -136,6 +181,8 @@ fn main() -> ExitCode {
         Some("bench-open") => cmd_bench_open(&args[1..]),
         // A ~1,300-body design built command by command, as an agent builds one over MCP.
         Some("bench-agent") => bench_agent::run(&args[1..]),
+        // The standard Assistant model test (#4851), run against a desktop app over its control channel.
+        Some("bench-assistant") => bench_assistant::run(&args[1..]),
         Some("--version" | "-V") => {
             println!("solidcraft-cli {}", env!("CARGO_PKG_VERSION"));
             Ok(())
@@ -143,10 +190,10 @@ fn main() -> ExitCode {
         // Asked-for help is not an error: usage on stdout, exit 0.
         Some("--help" | "-h" | "help") => {
             use std::io::Write as _;
-            let _ = std::io::stdout().lock().write_all(USAGE.as_bytes());
+            let _ = std::io::stdout().lock().write_all(usage().as_bytes());
             Ok(())
         }
-        _ => Err(USAGE.to_string()),
+        _ => Err(usage()),
     };
     match r {
         Ok(()) => ExitCode::SUCCESS,
@@ -161,6 +208,35 @@ fn pretty(v: &Value) -> String {
     serde_json::to_string_pretty(v).unwrap_or_default()
 }
 
+/// The whole usage: every command's lines under one `usage:` line. The lines come from the
+/// same place a command's own `--help` prints, so the two cannot drift apart.
+fn usage() -> String {
+    let mut s = String::from("usage:\n");
+    for c in COMMANDS.iter().filter(|c| c.listed) {
+        s.push_str(c.usage);
+    }
+    s.push_str(USAGE_DEBUG);
+    s
+}
+
+/// A command's own usage: its lines under a `usage:` line.
+fn command_usage(cmd: &str) -> String {
+    match COMMANDS.iter().find(|c| c.name == cmd) {
+        Some(c) => format!("usage:\n{}", c.usage),
+        None => usage(),
+    }
+}
+
+/// Whether the name is a command the CLI takes.
+fn is_command(cmd: &str) -> bool {
+    COMMANDS.iter().any(|c| c.name == cmd)
+}
+
+/// Whether the arguments ask for help.
+fn wants_help(args: &[String]) -> bool {
+    args.iter().any(|a| a == "--help" || a == "-h")
+}
+
 pub fn read_json(path: &str) -> Result<Value, String> {
     // Through the engine's file access, which refuses anything that is not a regular file and
     // reads no more than the cap: a character device or a FIFO would otherwise never end.
@@ -266,7 +342,7 @@ fn cmd_run(args: &[String]) -> Result<(), String> {
     let base = flag(args, "--in");
     let path = positional(args);
     if path.is_none() && base.is_none() {
-        return Err(USAGE.to_string());
+        return Err(usage());
     }
     let want_results = args.iter().any(|a| a == "--results");
     // `--profile` times each command and splits out its kernel time; it implies `--timings`.
@@ -326,13 +402,14 @@ fn open(base: Option<&str>, path: Option<&String>) -> Result<Session, String> {
         }
         (Some(b), None) => load(b),
         (None, Some(p)) => load(p),
-        (None, None) => Err(USAGE.to_string()),
+        (None, None) => Err(usage()),
     }
 }
 
 /// Refuses an option `cmd` doesn't take, and one missing its value: a typo, or another
-/// command's option, would otherwise be ignored without a word.
-fn known_flags(cmd: &str, args: &[String], valued: &[&str], switches: &[&str]) -> Result<(), String> {
+/// command's option, would otherwise be ignored without a word. `positionals` says whether the
+/// command takes a word of its own (a file, a seed): `fuzz` takes none, and would start a run.
+fn known_args(cmd: &str, args: &[String], valued: &[&str], switches: &[&str], positionals: bool) -> Result<(), String> {
     let mut i = 0;
     while let Some(a) = args.get(i) {
         if valued.contains(&a.as_str()) {
@@ -340,7 +417,9 @@ fn known_flags(cmd: &str, args: &[String], valued: &[&str], switches: &[&str]) -
                 Some(v) if !v.starts_with("--") => i += 2,
                 _ => return Err(format!("{cmd}: {a} needs a value")),
             }
-        } else if a.starts_with("--") && !switches.contains(&a.as_str()) {
+        } else if switches.contains(&a.as_str()) {
+            i += 1;
+        } else if a.starts_with("--") || !positionals {
             return Err(format!("{cmd} doesn't take {a} (it takes {})", [valued, switches].concat().join(", ")));
         } else {
             i += 1;
@@ -364,7 +443,7 @@ fn timeline_ok(s: &Session) -> Result<(), String> {
 
 fn cmd_eval(args: &[String]) -> Result<(), String> {
     let json_out = json_out(args)?;
-    let path = flag(args, "--in").or_else(|| positional(args).map(String::as_str)).ok_or_else(|| USAGE.to_string())?;
+    let path = flag(args, "--in").or_else(|| positional(args).map(String::as_str)).ok_or_else(usage)?;
     let mut s = load(path)?;
     let m = s.execute("inspect.measure", &json!({})).map_err(|e| e.to_string())?;
     let d = s.execute("document.inspect", &json!({})).map_err(|e| e.to_string())?;
@@ -382,7 +461,7 @@ fn cmd_eval(args: &[String]) -> Result<(), String> {
 /// A design's history as a command script (`timeline.export_script`): printed, or written to
 /// `--out`; what the script leaves out goes to stderr.
 fn cmd_script(args: &[String]) -> Result<(), String> {
-    let path = positional(args).ok_or_else(|| USAGE.to_string())?;
+    let path = positional(args).ok_or_else(usage)?;
     let s = &mut load(path)?;
     let out = flag(args, "--out");
     let r = s.execute("timeline.export_script", &json!({"path": out})).map_err(|e| e.to_string())?;
@@ -443,14 +522,15 @@ fn install_renderer() {
 
 fn cmd_snapshot(args: &[String]) -> Result<(), String> {
     install_renderer();
-    known_flags(
+    known_args(
         "snapshot",
         args,
         &["--in", "--out", "--width", "--height", "--view", "--camera", "--body", "--tool", "--section"],
         &["--no-grid", "--no-axes"],
+        true,
     )?;
     if positional(args).is_none() && flag(args, "--in").is_none() {
-        return Err(USAGE.to_string());
+        return Err(usage());
     }
     let out = flag(args, "--out").ok_or("snapshot needs --out FILE.png")?;
     let size = |name: &str, default: u32| match flag(args, name) {
@@ -534,7 +614,7 @@ fn ico(images: &[(usize, Vec<u8>)]) -> Result<Vec<u8>, String> {
 
 fn cmd_exec(args: &[String]) -> Result<(), String> {
     install_renderer();
-    let id = args.first().ok_or_else(|| USAGE.to_string())?;
+    let id = args.first().ok_or_else(usage)?;
     let p: Value = match args.get(1) {
         Some(t) => serde_json::from_str(t).map_err(|e| format!("params: {e}"))?,
         None => json!({}),
@@ -549,6 +629,10 @@ fn cmd_exec(args: &[String]) -> Result<(), String> {
 /// a running app's control port. stdout carries only protocol messages. Files the agent's tool
 /// calls reach are confined to `solidcraft_mcp::agent_scope` unless `--allow-any-path` is given.
 fn cmd_mcp(args: &[String]) -> Result<(), String> {
+    let render_gpu = args.iter().any(|arg| arg == "--render-gpu");
+    if render_gpu && flag(args, "--connect").is_some() {
+        return Err("mcp: --render-gpu installs a headless image host; a connected application owns its own device".into());
+    }
     install_renderer();
     let scope = (!args.iter().any(|a| a == "--allow-any-path"))
         .then(|| solidcraft_mcp::agent_scope(flags(args, "--allow-path").into_iter().map(std::path::PathBuf::from)));
@@ -592,18 +676,45 @@ fn cmd_mcp(args: &[String]) -> Result<(), String> {
             }
             Box::new(remote)
         }
-        (None, Some(path)) => Box::new(solidcraft_mcp::Headless::new(load_checked(path, param_check)?)),
+        (None, Some(path)) => {
+            let mut headless = solidcraft_mcp::Headless::new(load_checked(path, param_check)?);
+            if render_gpu {
+                headless.session.register_render_job_host(solidcraft_gpu::path::host().map_err(|e| e.to_string())?).map_err(|e| e.to_string())?;
+            }
+            Box::new(headless)
+        }
         (None, None) => {
+            if !args.iter().any(|a| a == "--headless")
+                && let Some(port) = discover_app()
+            {
+                eprintln!("solidcraft mcp: bridged to the running app at 127.0.0.1:{port} (--headless starts a session of its own)");
+                return serve_mcp(Box::new(solidcraft_mcp::Remote::new(&format!("127.0.0.1:{port}"), flag(args, "--token"))), scope);
+            }
             let mut headless = solidcraft_mcp::Headless::default();
             headless.session.param_check = param_check;
+            if render_gpu {
+                headless.session.register_render_job_host(solidcraft_gpu::path::host().map_err(|e| e.to_string())?).map_err(|e| e.to_string())?;
+            }
             Box::new(headless)
         }
     };
+    serve_mcp(backend, scope)
+}
+
+fn serve_mcp(backend: Box<dyn solidcraft_mcp::Backend>, scope: Option<solidcraft_engine::io::vfs::PathScope>) -> Result<(), String> {
     let stdin = std::io::stdin();
     let stdout = std::io::stdout();
     solidcraft_mcp::Server::new(backend).with_path_scope(scope).serve(stdin.lock(), stdout.lock()).map_err(|e| e.to_string())
 }
 
+/// The port of the running desktop app: the one its discovery file names, if something listens
+/// there (a file left by an app that crashed names a closed port).
+fn discover_app() -> Option<u16> {
+    let port = solidcraft_engine::control_auth::read_current_port()?;
+    let addr = std::net::SocketAddr::from(([127, 0, 0, 1], port));
+    std::net::TcpStream::connect_timeout(&addr, std::time::Duration::from_millis(500)).ok().map(|_| port)
+}
+
 /// `save-stress <path> <rounds>`: save a design of a few hundred kilobytes `rounds` times, its
 /// parameter `save_round` set to the round number each time.
 fn cmd_save_stress(args: &[String]) -> Result<(), String> {
@@ -716,9 +827,10 @@ pub(crate) fn cmd_bench_open(args: &[String]) -> Result<(), String> {
     let t = std::time::Instant::now();
     let s = Session::opened(doc, saved.as_ref());
     drop(read);
-    // Taken from the file: nothing evaluated (SOLIDCRAFT_NO_MODEL_CACHE evaluates anyway).
+    // Taken from the file: nothing evaluated (SOLIDCRAFT_NO_MODEL_CACHE evaluates anyway), or
+    // only the features whose state a thinned file left out.
     let adopted = saved.is_some() && s.model.last_recomputed == 0;
-    println!("{}", json!({"step": "evaluate", "ms": t.elapsed().as_secs_f64() * 1000.0, "adopted": adopted}));
+    println!("{}", json!({"step": "evaluate", "ms": t.elapsed().as_secs_f64() * 1000.0, "adopted": adopted, "recomputed": s.model.last_recomputed}));
     for r in &s.model.results {
         println!("{}", json!({"step": "feature", "id": r.id, "name": r.name, "ms": r.ms, "error": r.error}));
     }

apps/solidcraft-cli/src/render.rs

@@ -1,25 +1,89 @@
 //! Complete headless image-job workflow through the same engine commands as the UI/MCP.
-use serde_json::json;
+use serde_json::{Value, json};
 use solidcraft_engine::{
-    doc::render_settings::RenderSetup,
-    render::job::{CpuHost, JobId, Phase},
+    Session,
+    doc::render_settings::{RenderJob, RenderSetup},
+    render::job::{CpuHost, JobId, Phase, ToneMap},
 };
 
+/// Only explicit runtime CLI flags are stored here. A typed setup owns these
+/// values even when a supplied flag happens to match the saved value.
+#[derive(Default)]
+struct RuntimeOptions {
+    progressive: bool,
+    transparent: bool,
+    samples: Option<u32>,
+    max_depth: Option<u32>,
+    seed: Option<u32>,
+    lighting: Option<String>,
+    tone_map: Option<ToneMap>,
+    environment: Option<String>,
+}
+
+impl RuntimeOptions {
+    fn explicit_flag(&self) -> Option<&'static str> {
+        [
+            (self.progressive, "--progressive"),
+            (self.transparent, "--transparent"),
+            (self.samples.is_some(), "--samples"),
+            (self.max_depth.is_some(), "--max-depth"),
+            (self.seed.is_some(), "--seed"),
+            (self.lighting.is_some(), "--lighting"),
+            (self.tone_map.is_some(), "--tone-map"),
+            (self.environment.is_some(), "--environment"),
+        ]
+        .into_iter()
+        .find_map(|(present, flag)| present.then_some(flag))
+    }
+
+    fn request(&self, session: &Session, settings: RenderSetup) -> Result<(Value, bool), String> {
+        if let Some(job) = &settings.job {
+            if let Some(flag) = self.explicit_flag() {
+                return Err(format!("{flag} cannot accompany a typed saved render setup; change the saved job options instead"));
+            }
+            settings.validate().map_err(|e| e.to_string())?;
+            session.doc.render.validate_resources(&settings).map_err(|e| e.to_string())?;
+            let needs_gpu = matches!(job, RenderJob::GpuPath { .. });
+            return Ok((json!({"settings":settings}), needs_gpu));
+        }
+        // Legacy setups and unnamed requests retain their runtime wire contract.
+        settings.validate().map_err(|e| e.to_string())?;
+        let mut params = json!({"settings":settings,"transparent_background":self.transparent,
+            "progressive":self.progressive,"samples":self.samples,"max_depth":self.max_depth,"seed":self.seed});
+        if let Some(path) = &self.lighting {
+            let text = solidcraft_engine::io::vfs::read_to_string(path, 65536).map_err(|e| format!("could not read lighting: {e}"))?;
+            let lighting: solidcraft_engine::render::job::StudioLighting = serde_json::from_str(&text).map_err(|e| e.to_string())?;
+            params["lighting"] = json!(lighting);
+        }
+        if let Some(tone_map) = self.tone_map {
+            params["tone_map"] = json!(tone_map);
+        }
+        if let Some(path) = &self.environment {
+            let text = solidcraft_engine::io::vfs::read_to_string(path, 65536).map_err(|e| format!("could not read environment: {e}"))?;
+            params["environment"] = serde_json::from_str(&text).map_err(|e| e.to_string())?;
+        }
+        Ok((params, self.progressive))
+    }
+}
+
 pub fn run(args: &[String]) -> Result<(), String> {
     let input = args.first().filter(|p| !p.starts_with('-')).ok_or("render requires an input design or script")?;
     let mut out = None;
     let mut setup = None;
     let mut width = None;
     let mut height = None;
-    let mut transparent = false;
+    let mut exposure = None;
+    let mut runtime = RuntimeOptions::default();
     let mut overwrite = false;
     let mut timeout = 120u64;
     let mut i = 1;
     while let Some(arg) = args.get(i) {
         match arg.as_str() {
-            "--transparent" => transparent = true,
+            "--progressive" => runtime.progressive = true,
+            "--transparent" => runtime.transparent = true,
             "--overwrite" => overwrite = true,
-            "--out" | "--setup" | "--width" | "--height" | "--timeout" => {
+            "--out" | "--setup" | "--width" | "--height" | "--timeout" | "--samples" | "--max-depth" | "--seed" | "--exposure" | "--lighting"
+            | "--tone-map" | "--environment" => {
                 i += 1;
                 let value = args.get(i).ok_or_else(|| format!("missing value for {arg}"))?;
                 match arg.as_str() {
@@ -27,6 +91,20 @@ pub fn run(args: &[String]) -> Result<(), String> {
                     "--setup" => setup = Some(value.clone()),
                     "--width" => width = Some(value.parse::<u32>().map_err(|_| "invalid width")?),
                     "--height" => height = Some(value.parse::<u32>().map_err(|_| "invalid height")?),
+                    "--samples" => runtime.samples = Some(value.parse::<u32>().map_err(|_| "invalid samples")?),
+                    "--max-depth" => runtime.max_depth = Some(value.parse::<u32>().map_err(|_| "invalid depth")?),
+                    "--seed" => runtime.seed = Some(value.parse::<u32>().map_err(|_| "invalid seed")?),
+                    "--exposure" => exposure = Some(value.parse::<f64>().map_err(|_| "invalid exposure")?),
+                    // Defer file reads until a saved job has rejected conflicting controls.
+                    "--environment" => runtime.environment = Some(value.clone()),
+                    "--lighting" => runtime.lighting = Some(value.clone()),
+                    "--tone-map" => {
+                        runtime.tone_map = Some(match value.as_str() {
+                            "reinhard" => ToneMap::Reinhard,
+                            "aces_fitted" => ToneMap::AcesFitted,
+                            _ => return Err("tone-map must be reinhard or aces_fitted".into()),
+                        })
+                    }
                     _ => timeout = value.parse::<u64>().map_err(|_| "invalid timeout")?,
                 }
             }
@@ -39,18 +117,10 @@ pub fn run(args: &[String]) -> Result<(), String> {
     }
     let out = out.ok_or("render requires --out FILE.png")?;
     let mut session = crate::load(input)?;
-    session.set_render_job_host(Some(CpuHost::for_platform().map_err(|e| e.to_string())?)).map_err(|e| e.to_string())?;
-    session.execute("render.scene", &json!({})).map_err(|e| e.to_string())?;
-    let mut settings = if let Some(name) = setup {
-        session.doc.render.setups.get(&name).cloned().ok_or("no saved render setup with that name")?
+    let mut settings = if let Some(name) = setup.as_deref() {
+        session.doc.render.setups.get(name).cloned().ok_or("no saved render setup with that name")?
     } else {
-        let mut settings = RenderSetup::default();
-        if let Some(camera) = session.camera {
-            settings.camera = camera;
-        } else {
-            settings.camera.fit(&solidcraft_engine::product_scene::extract(&session).map_err(|e| e.to_string())?.bounds);
-        }
-        settings
+        RenderSetup::default()
     };
     if let Some(width) = width {
         settings.width = width;
@@ -58,7 +128,27 @@ pub fn run(args: &[String]) -> Result<(), String> {
     if let Some(height) = height {
         settings.height = height;
     }
-    let params = json!({"settings":settings,"transparent_background":transparent});
+    if let Some(exposure) = exposure {
+        settings.exposure_ev = exposure;
+    }
+    // Resolve saved intent before opening a GPU or explicitly settling geometry.
+    // Width/height/exposure only change this validated inline settings clone.
+    let (mut params, needs_gpu) = runtime.request(&session, settings)?;
+    session.set_render_job_host(Some(CpuHost::for_platform().map_err(|e| e.to_string())?)).map_err(|e| e.to_string())?;
+    if needs_gpu {
+        session.register_render_job_host(solidcraft_gpu::path::host().map_err(|e| e.to_string())?).map_err(|e| e.to_string())?;
+    }
+    session.execute("render.scene", &json!({})).map_err(|e| e.to_string())?;
+    if setup.is_none() {
+        let camera = if let Some(camera) = session.camera {
+            camera
+        } else {
+            let mut camera = RenderSetup::default().camera;
+            camera.fit(&solidcraft_engine::product_scene::extract(&session).map_err(|e| e.to_string())?.bounds);
+            camera
+        };
+        params["settings"]["camera"] = json!(camera);
+    }
     let preflight = session.execute("render.preflight", &params).map_err(|e| e.to_string())?;
     let started = session.execute("render.start", &params).map_err(|e| e.to_string())?;
     let id: JobId = serde_json::from_value(started["job"].clone()).map_err(|e| e.to_string())?;

apps/solidcraft-cli/tests/action_matrix.rs

@@ -1412,7 +1412,7 @@ fn a_sketch_on_a_patterned_boss_top() {
 fn construction_geometry_and_holes_on_a_moved_component() {
     let moved = || {
         vec![
-            json!({"command": "component.create", "params": {"name": "Arm"}}),
+            json!({"command": "component.create", "params": {"name": "Arm", "grounded": false}}),
             json!({"command": "solid.box", "params": {"corner": [20, 0, 0], "length": 10, "width": 4, "height": 4, "body_name": "ArmBody"}}),
             json!({"command": "component.activate", "params": {"component": 0}}),
             json!({"command": "occurrence.move", "params": {"occurrence": "Arm:1", "translate": [0, 50, 0]}}),

apps/solidcraft-cli/tests/corpus/scripts/components-arm.json

@@ -1,6 +1,6 @@
 {"commands": [
  {"command": "solid.box", "params": {"length": 10, "width": 10, "height": 10, "body_name": "Base"}},
- {"command": "component.create", "params": {"name": "Arm"}},
+ {"command": "component.create", "params": {"name": "Arm", "grounded": false}},
  {"command": "solid.box", "params": {"corner": [20, 0, 0], "length": 10, "width": 4, "height": 4, "body_name": "ArmBody"}},
  {"command": "solid.fillet", "params": {"edges": [[25, 4, 4]], "radius": 1}},
  {"command": "component.activate", "params": {"component": 0}},

apps/solidcraft-cli/tests/help_output.rs

@@ -1,6 +1,84 @@
 //! An explicit help request prints usage to stdout and succeeds; an unknown command still fails.
 
-use std::process::Command;
+use std::process::{Command, Stdio};
+use std::time::{Duration, Instant};
+
+/// Every command the CLI takes, with the name its own usage names: `inspect` is `eval`, and
+/// `licenses` is `licences`.
+const COMMANDS: &[(&str, &str)] = &[
+    ("run", "run"),
+    ("eval", "eval"),
+    ("inspect", "eval"),
+    ("script", "script"),
+    ("bench-open", "bench-open"),
+    ("bench-agent", "bench-agent"),
+    ("snapshot", "snapshot"),
+    ("render", "render"),
+    ("exec", "exec"),
+    ("commands", "commands"),
+    ("recipe", "recipe"),
+    ("oracle", "oracle"),
+    ("fuzz", "fuzz"),
+    ("fuzz-one", "fuzz-one"),
+    ("mcp", "mcp"),
+    ("crashes", "crashes"),
+    ("licences", "licences"),
+    ("licenses", "licences"),
+    ("gpu", "gpu"),
+    ("icon", "icon"),
+    ("bench-edit", "bench-edit"),
+    ("save-stress", "save-stress"),
+];
+
+/// The commands the usage lists: the aliases answer to another command's name.
+const LISTED: &[&str] = &[
+    "run",
+    "eval",
+    "script",
+    "bench-open",
+    "bench-agent",
+    "snapshot",
+    "render",
+    "exec",
+    "commands",
+    "recipe",
+    "oracle",
+    "fuzz",
+    "mcp",
+    "crashes",
+    "licences",
+    "gpu",
+    "icon",
+];
+
+/// The command names a text mentions after `solidcraft-cli `, each one only once.
+fn mentioned(text: &str) -> Vec<&str> {
+    let mut names: Vec<&str> = text.split("solidcraft-cli ").skip(1).filter_map(|rest| rest.split_whitespace().next()).collect();
+    names.sort_unstable();
+    names.dedup();
+    names
+}
+
+/// Runs the binary and waits at most `limit` for it to finish. `None` means it was still
+/// running and was killed: the fuzz run `fuzz --help` used to start goes on for minutes.
+fn run_within(limit: Duration, args: &[&str]) -> Option<(Option<i32>, String, String)> {
+    let mut child = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli")).args(args).stdout(Stdio::piped()).stderr(Stdio::piped()).spawn().unwrap();
+    let started = Instant::now();
+    loop {
+        match child.try_wait().unwrap() {
+            Some(status) => {
+                let out = child.wait_with_output().unwrap();
+                return Some((status.code(), String::from_utf8_lossy(&out.stdout).into_owned(), String::from_utf8_lossy(&out.stderr).into_owned()));
+            }
+            None if started.elapsed() >= limit => {
+                let _ = child.kill();
+                let _ = child.wait();
+                return None;
+            }
+            None => std::thread::sleep(Duration::from_millis(25)),
+        }
+    }
+}
 
 #[test]
 fn help_prints_usage_and_succeeds() {
@@ -21,3 +99,61 @@ fn unknown_command_still_fails_with_usage() {
     assert!(output.stdout.is_empty());
     assert!(String::from_utf8_lossy(&output.stderr).starts_with("error: usage:"));
 }
+
+#[test]
+fn every_command_prints_its_own_usage() {
+    for (cmd, named) in COMMANDS {
+        for flag in ["--help", "-h"] {
+            let output = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli")).args([*cmd, flag]).output().unwrap();
+            assert!(output.status.success(), "{cmd} {flag}: {}", String::from_utf8_lossy(&output.stderr));
+            let stdout = String::from_utf8_lossy(&output.stdout);
+            assert!(stdout.starts_with("usage:"), "{cmd} {flag}: {stdout}");
+            assert_eq!(mentioned(&stdout), vec![*named], "{cmd} {flag} printed another command's usage: {stdout}");
+            assert!(output.stderr.is_empty(), "{cmd} {flag}: {}", String::from_utf8_lossy(&output.stderr));
+        }
+    }
+}
+
+#[test]
+fn the_top_level_usage_still_lists_every_command() {
+    let output = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli")).arg("--help").output().unwrap();
+    let stdout = String::from_utf8_lossy(&output.stdout);
+    for cmd in LISTED {
+        assert!(stdout.contains(&format!("solidcraft-cli {cmd}")), "{cmd}: {stdout}");
+    }
+}
+
+#[test]
+fn fuzz_help_does_not_start_a_fuzz_run() {
+    let Some((code, stdout, stderr)) = run_within(Duration::from_secs(20), &["fuzz", "--help"]) else {
+        panic!("`fuzz --help` kept running: it started a fuzz run instead of printing the usage");
+    };
+    assert_eq!(code, Some(0), "{stderr}");
+    assert!(stdout.starts_with("usage:"), "{stdout}");
+    assert_eq!(mentioned(&stdout), vec!["fuzz"], "{stdout}");
+    assert!(stderr.is_empty(), "{stderr}");
+}
+
+#[test]
+fn fuzz_refuses_an_argument_it_does_not_take() {
+    for arg in ["--not-a-flag", "stray"] {
+        let Some((code, _stdout, stderr)) = run_within(Duration::from_secs(20), &["fuzz", arg]) else {
+            panic!("`fuzz {arg}` kept running: it started a fuzz run instead of refusing the argument");
+        };
+        assert_ne!(code, Some(0), "`fuzz {arg}` succeeded");
+        assert!(stderr.contains(arg), "`fuzz {arg}`: {stderr}");
+    }
+}
+
+#[test]
+fn render_help_keeps_the_registered_gpu_request_controls() {
+    for args in [vec!["--help"], vec!["render", "--help"]] {
+        let output = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli")).args(&args).output().unwrap();
+        assert!(output.status.success(), "{args:?}: {}", String::from_utf8_lossy(&output.stderr));
+        assert!(output.stderr.is_empty());
+        let stdout = String::from_utf8_lossy(&output.stdout);
+        for flag in ["--progressive", "--samples", "--max-depth", "--seed", "--exposure", "--lighting", "--environment", "--tone-map"] {
+            assert!(stdout.contains(flag), "{args:?} lost {flag}: {stdout}");
+        }
+    }
+}

apps/solidcraft-cli/tests/mcp_connect.rs

@@ -89,3 +89,65 @@ fn mcp_connect_without_a_port_is_refused_at_start() {
         assert!(stderr.contains("HOST:PORT"), "{addr}: {stderr}");
     }
 }
+
+/// `mcp` with no arguments finds the running app through the discovery file and uses that
+/// launch's token; with no app behind the file it stays a headless session.
+#[test]
+fn mcp_without_arguments_finds_the_running_app() {
+    let listener = TcpListener::bind("127.0.0.1:0").unwrap();
+    let port = listener.local_addr().unwrap().port();
+    let control_dir = std::env::temp_dir().join(format!("solidcraft-mcp-discover-{}-{port}", std::process::id()));
+    std::fs::create_dir_all(&control_dir).unwrap();
+    let token = "fedcba9876543210".repeat(4);
+    std::fs::write(control_dir.join(format!("{port}.token")), &token).unwrap();
+    std::fs::write(control_dir.join("current.port"), format!("{port}\n")).unwrap();
+    let app = std::thread::spawn(move || {
+        // The discovery probe connects and leaves without a request; the tool call follows.
+        let (stream, line) = loop {
+            let (stream, _) = listener.accept().unwrap();
+            let mut line = String::new();
+            BufReader::new(stream.try_clone().unwrap()).read_line(&mut line).unwrap();
+            if !line.is_empty() {
+                break (stream, line);
+            }
+        };
+        let req: Value = serde_json::from_str(&line).unwrap();
+        let ok = req["token"] == json!(token);
+        let reply = json!({"id": req["id"], "ok": ok, "result": {"bodies": [], "method": req["method"]}, "error": "unauthorized"});
+        writeln!(&stream, "{reply}").unwrap();
+    });
+    let mut child = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli"))
+        .args(["mcp", "--allow-any-path"])
+        .env("SOLIDCRAFT_CONTROL_DIR", &control_dir)
+        .env_remove("SOLIDCRAFT_CONTROL_TOKEN")
+        .stdin(Stdio::piped())
+        .stdout(Stdio::piped())
+        .stderr(Stdio::piped())
+        .spawn()
+        .unwrap();
+    let mut stdin = child.stdin.take().unwrap();
+    let mut stdout = BufReader::new(child.stdout.take().unwrap());
+    writeln!(stdin, "{}", json!({"jsonrpc": "2.0", "id": 1, "method": "tools/call", "params": {"name": "measure", "arguments": {}}})).unwrap();
+    let mut line = String::new();
+    stdout.read_line(&mut line).unwrap();
+    let r: Value = serde_json::from_str(&line).unwrap_or_else(|e| panic!("{e}: {line:?}"));
+    assert_ne!(r["result"]["isError"], true, "{r}");
+    assert!(r["result"]["content"][0]["text"].as_str().unwrap_or_default().contains("engine.execute"), "{r}");
+    app.join().unwrap();
+    drop(stdin);
+    assert!(child.wait().unwrap().success());
+
+    // The file names a port nothing listens on (the app crashed): a headless session instead.
+    let closed = TcpListener::bind("127.0.0.1:0").unwrap();
+    let dead = closed.local_addr().unwrap().port();
+    drop(closed);
+    std::fs::write(control_dir.join("current.port"), format!("{dead}\n")).unwrap();
+    let out = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli"))
+        .args(["mcp", "--allow-any-path"])
+        .env("SOLIDCRAFT_CONTROL_DIR", &control_dir)
+        .stdin(Stdio::null())
+        .output()
+        .unwrap();
+    assert!(!String::from_utf8_lossy(&out.stderr).contains("bridged to the running app"), "{}", String::from_utf8_lossy(&out.stderr));
+    std::fs::remove_dir_all(&control_dir).ok();
+}

apps/solidcraft-cli/tests/mcp_render_host.rs

@@ -0,0 +1,9 @@
+//! Explicit native GPU registration must not change bridged MCP ownership.
+use std::process::Command;
+#[test]
+fn connected_application_rejects_headless_gpu_installation_before_connecting() {
+    let result = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli")).args(["mcp", "--render-gpu", "--connect", "127.0.0.1:1"]).output().unwrap();
+    assert!(!result.status.success());
+    let message = String::from_utf8_lossy(&result.stderr);
+    assert!(message.contains("connected application owns its own device"), "{message}");
+}

apps/solidcraft-cli/tests/model_cache.rs

@@ -7,7 +7,7 @@ use std::sync::Arc;
 
 use serde_json::{Value, json};
 use solidcraft_engine::Session;
-use solidcraft_engine::doc::{ModelBody, ModelState};
+use solidcraft_engine::doc::{ModelBody, ModelState, SavedModel};
 
 fn corpus() -> Vec<PathBuf> {
     let dir = Path::new(env!("CARGO_MANIFEST_DIR")).join("tests/corpus");
@@ -149,6 +149,87 @@ fn imported_assemblies_open_from_their_model_as_evaluated() {
     check("imported hinge", s);
 }
 
+/// `built` saved with `saved`, a model of it that keeps only some states (as a file without room
+/// for all of them does, #3220), opens as the design evaluated again: evaluating just the
+/// features whose state the file left out, then after suppressing a feature at, before or after
+/// each state it kept, after undoing that, and with the marker moved there and back.
+fn check_thinned(name: &str, built: &Session, saved: &SavedModel) {
+    let design = built.design();
+    let bytes =
+        solidcraft_engine::io::write_design_container_with_cache(&design, solidcraft_engine::io::DesignCompression::Fast, None, Some(saved)).unwrap();
+    assert!(solidcraft_engine::io::read_design_geometry(&bytes).is_some(), "{name}: the file keeps the final state");
+    let path = temp(&name.replace(' ', "-"));
+    std::fs::write(&path, &bytes).unwrap();
+    let mut cached = open(&path);
+    let mut rebuilt = Session::new(solidcraft_engine::io::read_design(&bytes).unwrap());
+    let features = saved.records["features"].as_array().unwrap();
+    let unkept = features.iter().filter(|f| f["skipped"] == false && f.get("state").is_none()).count();
+    assert!(unkept > 0, "{name}: some states left out");
+    assert_eq!(cached.model.recomputed, unkept, "{name}: evaluated just the features whose state the file left out");
+    assert_eq!(model(name, &cached), model(name, &rebuilt), "{name}: opened from the file's model");
+    let n = cached.doc.features.len();
+    let mut at: Vec<usize> = features
+        .iter()
+        .enumerate()
+        .filter(|(_, f)| f["skipped"] == false && f.get("state").is_some())
+        .flat_map(|(k, _)| [k.saturating_sub(1), k, k + 1])
+        .filter(|i| *i < n)
+        .collect();
+    at.dedup();
+    for i in at {
+        let edit = json!({"feature": cached.doc.features[i].id, "suppressed": true});
+        let (a, b) = (cached.execute("timeline.suppress", &edit), rebuilt.execute("timeline.suppress", &edit));
+        assert_eq!(a.is_ok(), b.is_ok(), "{name}: suppressing feature {i}");
+        assert_eq!(model(name, &cached), model(name, &rebuilt), "{name}: feature {i} suppressed");
+        if a.is_ok() {
+            cached.execute("edit.undo", &json!({})).unwrap();
+            rebuilt.execute("edit.undo", &json!({})).unwrap();
+            assert_eq!(model(name, &cached), model(name, &rebuilt), "{name}: suppressing feature {i} undone");
+        }
+        for marker in [json!({"position": i}), json!({})] {
+            cached.execute("timeline.rollback", &marker).unwrap();
+            rebuilt.execute("timeline.rollback", &marker).unwrap();
+            assert_eq!(model(name, &cached), model(name, &rebuilt), "{name}: the marker at {marker}, from feature {i}");
+        }
+    }
+    let _ = std::fs::remove_file(&path);
+}
+
+/// A model too big for its file keeps the final state, then the slowest features' states as fit
+/// (#3220). Both the smallest such model (the final state, and states that add no body to it)
+/// and one that keeps more open as the design evaluated again. The placed components' design has
+/// a cut whose fingerprint reads where the bodies before it lie, which a state left out does not
+/// say until it is evaluated.
+#[test]
+fn thinned_models_open_as_evaluated() {
+    let corpus = Path::new(env!("CARGO_MANIFEST_DIR")).join("tests/corpus/components-arm.solidcraft");
+    for sample in ["Sample Plate", "Plastic Enclosure", "components-arm"] {
+        let built = match solidcraft_engine::sample::samples().into_iter().find(|s| s.name == sample) {
+            Some(s) => {
+                let mut built = Session::default();
+                for c in (s.script)()["commands"].as_array().unwrap() {
+                    built.execute(c["command"].as_str().unwrap(), &c["params"]).unwrap();
+                }
+                built
+            }
+            None => open(&corpus),
+        };
+        let saved = built.model.saved(&built.design()).unwrap();
+        // Every body a megabyte (the records fit in the room left over): each budget keeps one more
+        // body's worth of states.
+        let body = 1 << 20;
+        let pieces: Vec<Vec<(usize, usize)>> = (0..saved.bodies.len()).map(|i| vec![(i, body)]).collect();
+        let thinned: Vec<SavedModel> =
+            (0..=saved.bodies.len()).filter_map(|n| saved.thinned(&pieces, n * body + body - 1).map(|(m, _, _)| m)).collect();
+        let kept = |m: &SavedModel| m.records["features"].as_array().unwrap().iter().filter(|f| f.get("state").is_some()).count();
+        let smallest = thinned.first().unwrap();
+        assert!(smallest.records["states"].as_array().unwrap().len() < saved.records["states"].as_array().unwrap().len(), "{sample}");
+        let more = thinned.iter().find(|m| kept(m) > kept(smallest) && kept(m) < built.doc.features.len()).unwrap();
+        check_thinned(&format!("{sample} smallest"), &built, smallest);
+        check_thinned(&format!("{sample} thinned"), &built, more);
+    }
+}
+
 /// Opened from its model, a design evaluates only from the first feature an edit changes: the
 /// saved states before it are kept as they were read (the same states, not evaluated again).
 #[test]

apps/solidcraft-cli/tests/run_results.rs

@@ -59,6 +59,84 @@ fn cli_loads_both_design_encodings_by_contents() {
     }
 }
 
+/// #1369: a pending concept that did not land in the numbered release must not be silently
+/// dropped on open/resave, in either encoding or before replacing an existing destination.
+#[test]
+fn unknown_pending_concepts_preserve_the_open_design_and_output_files() {
+    use solidcraft_engine::{Session, doc, io};
+
+    let dir = Scratch::new();
+    for version in [33, doc::format::FORMAT] {
+        let mut experimental = doc::Document::new("Experimental");
+        experimental.format = doc::format::format_string(version);
+        experimental.format_pending.push("experimental-card".into());
+        for (extension, bytes) in [("json", io::write_design(&experimental)), ("solidcraft", io::write_design_container(&experimental).unwrap())] {
+            let source = dir.0.join(format!("experimental-{version}.{extension}"));
+            std::fs::write(&source, &bytes).unwrap();
+            let mut session = Session::default();
+            session.execute("solid.box", &json!({"length": 2, "width": 3, "height": 4})).unwrap();
+            let original = session.doc.clone();
+            let original_path = session.path.clone();
+            let undo = session.undo.len();
+            let dirty = session.is_dirty();
+            let err = session.execute("doc.open", &json!({"path": source})).unwrap_err().to_string();
+            assert!(err.contains("experimental-card") && err.contains("update SolidCraft"), "{err}");
+            assert_eq!(session.doc, original);
+            assert_eq!(session.path, original_path);
+            assert_eq!(session.undo.len(), undo);
+            assert_eq!(session.is_dirty(), dirty);
+
+            for existing in [false, true] {
+                let destination = dir.0.join(format!("output-{version}-{extension}-{existing}.{extension}"));
+                let backup = io::backup_path(&destination);
+                if existing {
+                    std::fs::write(&destination, b"existing design").unwrap();
+                    std::fs::write(&backup, b"existing backup").unwrap();
+                }
+                let output = cli().args(["run", "--in"]).arg(&source).arg("--save").arg(&destination).output().unwrap();
+                assert_eq!(output.status.code(), Some(1));
+                let error = String::from_utf8_lossy(&output.stderr);
+                assert!(error.contains("experimental-card") && error.contains("update SolidCraft"), "{error}");
+                if existing {
+                    assert_eq!(std::fs::read(&destination).unwrap(), b"existing design");
+                    assert_eq!(std::fs::read(&backup).unwrap(), b"existing backup");
+                } else {
+                    assert!(!destination.exists() && !backup.exists());
+                }
+                assert_eq!(std::fs::read(&source).unwrap(), bytes);
+            }
+        }
+    }
+}
+
+#[test]
+fn known_pending_concepts_and_released_files_round_trip_with_inert_metadata() {
+    use solidcraft_engine::{doc, io};
+
+    let dir = Scratch::new();
+    let current = doc::Document::new("Supported");
+    let mut released = current.clone();
+    released.format = doc::format::format_string(33);
+    released.format_pending.clear();
+    let mut experimental = released.clone();
+    experimental.format_pending.push("reserved-body-names".into());
+    for (index, mut document) in [current, released, experimental].into_iter().enumerate() {
+        document.metadata.0.insert("com.example.tool".into(), json!({"format_pending": ["experimental-card"], "physical_card": {"density": 700}}));
+        for (extension, bytes) in [("json", io::write_design(&document)), ("solidcraft", io::write_design_container(&document).unwrap())] {
+            let source = dir.0.join(format!("supported-{index}.{extension}"));
+            let destination = dir.0.join(format!("resaved-{index}.{extension}"));
+            std::fs::write(&source, &bytes).unwrap();
+            let output = cli().args(["run", "--in"]).arg(&source).arg("--save").arg(&destination).output().unwrap();
+            assert!(output.status.success(), "{}", String::from_utf8_lossy(&output.stderr));
+            let reopened = io::read_design(&std::fs::read(&destination).unwrap()).unwrap();
+            assert_eq!(reopened.metadata, document.metadata);
+            assert_eq!(reopened.name, document.name);
+            assert_eq!(reopened.features, document.features);
+            assert_eq!(std::fs::read(&source).unwrap(), bytes);
+        }
+    }
+}
+
 #[test]
 fn results_still_save_and_export_the_script_once() {
     let dir = Scratch::new();
@@ -209,3 +287,175 @@ fn timings_and_profile_report_each_command() {
     assert!(!output.status.success());
     assert!(String::from_utf8_lossy(&output.stderr).contains("--timings needs a script"));
 }
+
+fn render_setup_script(dir: &Scratch, job: Value) -> PathBuf {
+    let path = dir.0.join("render.json");
+    std::fs::write(
+        &path,
+        json!({"commands":[
+            {"command":"solid.box","params":{"length":10,"width":10,"height":10}},
+            {"command":"render.settings.set","params":{"name":"Portable setup","set":{"width":16,"height":16,"job":job}}}
+        ]})
+        .to_string(),
+    )
+    .unwrap();
+    path
+}
+
+#[cfg(feature = "raytrace-cpu")]
+#[test]
+fn render_uses_typed_cpu_setups_from_scripts_and_saved_designs() {
+    for options in [json!({}), json!({"progressive":{"samples_per_pixel":3,"seed":81},"lights":[]})] {
+        let dir = Scratch::new();
+        let script = render_setup_script(&dir, json!({"method":"cpu_raytrace","options":options}));
+        let image = dir.0.join("script.png");
+        let result = json_output(
+            cli()
+                .arg("render")
+                .arg(&script)
+                .args(["--setup", "Portable setup", "--out"])
+                .arg(&image)
+                .env("SOLIDCRAFT_GPU", "must-not-be-read-for-cpu")
+                .output()
+                .unwrap(),
+        );
+        assert_eq!(result["preflight"]["resolved"]["executor"], "cpu-raytrace");
+        assert_eq!(result["export"]["frame"]["executor"], "cpu-raytrace");
+        assert_eq!(result["preflight"]["request"]["integrator"], "raytrace");
+        assert_eq!(result["preflight"]["request"]["raytrace"].get("progressive"), options.get("progressive"));
+        let png = image::load_from_memory(&std::fs::read(&image).unwrap()).unwrap();
+        assert_eq!((png.width(), png.height()), (16, 16));
+
+        let saved = dir.0.join("portable.solidcraft");
+        json_output(cli().arg("run").arg(&script).arg("--save").arg(&saved).output().unwrap());
+        let original = std::fs::read(&saved).unwrap();
+        let overridden = dir.0.join("overridden.png");
+        let result = json_output(
+            cli()
+                .arg("render")
+                .arg(&saved)
+                .args(["--setup", "Portable setup", "--out"])
+                .arg(&overridden)
+                .args(["--width", "12", "--height", "8", "--exposure", "1.25"])
+                .env("SOLIDCRAFT_GPU", "must-not-be-read-for-cpu")
+                .output()
+                .unwrap(),
+        );
+        assert_eq!(result["preflight"]["request"]["width"], 12);
+        assert_eq!(result["preflight"]["request"]["height"], 8);
+        assert_eq!(result["preflight"]["request"]["raytrace"]["exposure_ev"], 1.25);
+        assert_eq!(result["export"]["frame"]["executor"], "cpu-raytrace");
+        assert_eq!(result["preflight"]["request"]["raytrace"].get("progressive"), options.get("progressive"));
+        let png = image::load_from_memory(&std::fs::read(overridden).unwrap()).unwrap();
+        assert_eq!((png.width(), png.height()), (12, 8));
+        assert_eq!(std::fs::read(saved).unwrap(), original, "CLI overrides must not rewrite saved intent");
+    }
+}
+
+#[test]
+fn render_preserves_typed_raster_and_legacy_runtime_controls() {
+    for job in [Value::Null, json!({"method":"raster","transparent_background":true})] {
+        let dir = Scratch::new();
+        let script = render_setup_script(&dir, job.clone());
+        let out = dir.0.join("raster.png");
+        let mut command = cli();
+        command
+            .arg("render")
+            .arg(&script)
+            .args(["--setup", "Portable setup", "--out"])
+            .arg(&out)
+            .env("SOLIDCRAFT_GPU", "must-not-be-read-for-raster");
+        if job.is_null() {
+            command.arg("--transparent");
+        }
+        let result = json_output(command.output().unwrap());
+        assert_eq!(result["preflight"]["resolved"]["executor"], "cpu-product");
+        assert_eq!(result["export"]["frame"]["executor"], "cpu-product");
+        assert_eq!(result["preflight"]["request"]["transparent_background"], true);
+        assert!(std::fs::read(out).unwrap().starts_with(b"\x89PNG\r\n\x1a\n"));
+    }
+}
+
+#[test]
+fn typed_render_rejects_explicit_runtime_flags_before_gpu_or_option_file_reads() {
+    let dir = Scratch::new();
+    let script = render_setup_script(&dir, json!({"method":"gpu_path","options":{"samples":64,"seed":0}}));
+    let out = dir.0.join("existing.png");
+    std::fs::write(&out, b"previous completed image").unwrap();
+    for flags in [
+        &["--progressive"][..],
+        &["--transparent"][..],
+        &["--samples", "64"][..],
+        &["--max-depth", "8"][..],
+        &["--seed", "0"][..],
+        &["--lighting", "deliberately-missing-lighting.json"][..],
+        &["--tone-map", "reinhard"][..],
+        &["--environment", "deliberately-missing-environment.json"][..],
+    ] {
+        let output = cli()
+            .arg("render")
+            .arg(&script)
+            .args(["--setup", "Portable setup", "--out"])
+            .arg(&out)
+            .arg("--overwrite")
+            .args(flags)
+            .env("SOLIDCRAFT_GPU", "must-not-be-read-for-conflicts")
+            .output()
+            .unwrap();
+        assert_eq!(output.status.code(), Some(1));
+        let error = String::from_utf8_lossy(&output.stderr);
+        assert!(error.contains(&format!("{} cannot accompany a typed saved render setup", flags[0])), "{error}");
+        assert!(output.stdout.is_empty());
+        assert_eq!(std::fs::read(&out).unwrap(), b"previous completed image");
+    }
+}
+
+#[test]
+fn typed_gpu_render_selects_its_host_without_a_progressive_runtime_flag() {
+    // A deliberately invalid policy proves that dispatch reached the GPU host
+    // without depending on an adapter or accepting a CPU fallback. The legacy
+    // --progressive path must still reach that same host-selection boundary.
+    for job in [json!({"method":"gpu_path","options":{"samples":2}}), Value::Null] {
+        let dir = Scratch::new();
+        let script = render_setup_script(&dir, job.clone());
+        let out = dir.0.join("gpu.png");
+        let mut command = cli();
+        command.arg("render").arg(&script).args(["--setup", "Portable setup", "--out"]).arg(&out).env("SOLIDCRAFT_GPU", "not-a-gpu-policy");
+        if job.is_null() {
+            command.arg("--progressive");
+        }
+        let output = command.output().unwrap();
+        assert_eq!(output.status.code(), Some(1));
+        let error = String::from_utf8_lossy(&output.stderr);
+        assert!(error.contains("SOLIDCRAFT_GPU must be auto, hardware, software or cpu"), "{error}");
+        assert!(!out.exists());
+    }
+}
+
+#[test]
+fn render_setup_overrides_obey_shared_validation_before_host_initialization() {
+    let dir = Scratch::new();
+    let script = render_setup_script(&dir, json!({"method":"cpu_raytrace","options":{"progressive":{"samples_per_pixel":64}}}));
+    let out = dir.0.join("invalid.png");
+    // 1024 * 1024 * 64 exceeds the unchanged default Compact camera-sample
+    // budget. Admission must name that envelope before initializing any host.
+    for (flags, message) in [
+        (&["--width", "1024", "--height", "1024"][..], "CPU Compact exceeds its 16777216 camera-sample admission"),
+        (&["--width", "0"][..], "render output must be at least"),
+        (&["--exposure", "NaN"][..], "render exposure must be finite"),
+    ] {
+        let output = cli()
+            .arg("render")
+            .arg(&script)
+            .args(["--setup", "Portable setup", "--out"])
+            .arg(&out)
+            .args(flags)
+            .env("SOLIDCRAFT_GPU", "must-not-be-read-for-invalid-settings")
+            .output()
+            .unwrap();
+        assert_eq!(output.status.code(), Some(1));
+        let error = String::from_utf8_lossy(&output.stderr);
+        assert!(error.contains(message), "{error}");
+        assert!(!out.exists());
+    }
+}

apps/solidcraft-web/Cargo.toml

@@ -13,6 +13,10 @@ workspace = true
 name = "solidcraft-web"
 path = "src/main.rs"
 
+[features]
+default = []
+bundled-render-library = ["solidcraft-engine/bundled-render-library"]
+
 [dependencies]
 solidcraft-engine = { workspace = true }
 solidcraft-ui-egui = { workspace = true }

apps/solidcraft-web/src/disk.rs

@@ -294,7 +294,7 @@ mod web {
         let options = Object::new();
         let _ = Reflect::set(&options, &"multiple".into(), &JsValue::FALSE);
         let extensions = Array::new();
-        for e in [".solidcraft", ".solvecraft", ".json", ".step", ".stp", ".3mf", ".stl", ".obj", ".glb", ".gltf"] {
+        for e in [".solidcraft", ".solvecraft", ".json", ".step", ".stp", ".3mf", ".stl", ".obj", ".glb", ".gltf", ".fcstd", ".3dm"] {
             extensions.push(&e.into());
         }
         let accept = Object::new();

apps/solidcraft-web/src/files.rs

@@ -499,8 +499,9 @@ fn input_picker(files: &Rc<Files>, intent: Intent) {
     let Some(doc) = web_sys::window().and_then(|w| w.document()) else { return };
     let Ok(input) = doc.create_element("input").map(|e| e.unchecked_into::<web_sys::HtmlInputElement>()) else { return };
     input.set_type("file");
-    // Everything the browser build imports, from the format registry (no cadmpeg formats here).
-    let accept = solidcraft_engine::io::formats::open_extensions(false).iter().map(|e| format!(".{e}")).collect::<Vec<_>>().join(",");
+    // Everything the browser build imports, from the format registry: cadmpeg is pure Rust, so
+    // FreeCAD and Rhino files are part of it.
+    let accept = solidcraft_engine::io::formats::open_extensions(true).iter().map(|e| format!(".{e}")).collect::<Vec<_>>().join(",");
     input.set_accept(&accept);
     // Attached (hidden) while it is open: some browsers ignore a click on a detached input.
     let _ = input.set_attribute("style", "display:none");

apps/solidcraft-web/src/main.rs

@@ -131,6 +131,7 @@ mod web {
         /// The language the fonts were last set up for (a CJK UI leads with the CJK face).
         font_language: String,
         space_mouse: SpaceMouse,
+        wheel_gestures: solidcraft_ui_egui::WebWheelGestures,
     }
 
     impl Shell {
@@ -509,6 +510,10 @@ mod web {
             UNSAVED.with(|u| u.set(solidcraft_ui_egui::documents::any_dirty(&self.app)));
         }
         fn raw_input_hook(&mut self, ctx: &egui::Context, raw: &mut egui::RawInput) {
+            let now = raw.time.unwrap_or_else(|| ctx.input(|i| i.time));
+            if let Some(delay) = self.wheel_gestures.update(raw, now) {
+                ctx.request_repaint_after(delay);
+            }
             files::take_drops(&self.files, raw);
             // Before the app's own hook, which adds the control channel's events.
             self.space_mouse.raw_input_hook(ctx, self.app.preferences.space_mouse_enabled, raw);
@@ -673,6 +678,7 @@ mod web {
                             cjk_bytes: None,
                             font_language,
                             space_mouse: SpaceMouse::default(),
+                            wheel_gestures: solidcraft_ui_egui::WebWheelGestures::default(),
                         }))
                     }),
                 )

apps/solidcraft-web/src/space_mouse.rs

@@ -246,11 +246,11 @@ mod tests {
         let axis =
             |source, rest, full| solidcraft_ui_egui::space_mouse::AxisCalibration { source, reversed: false, rest, dead_zone: 0, full: [full; 2] };
         // A short-range device: 15 of its 50 is under the raw dead zone, but 105 of 350 calibrated.
-        let short = Calibration { dead_zone_share: 0.0, axes: std::array::from_fn(|r| axis(r, 0, 50)) };
+        let short = Calibration { dead_zone_share: 0.0, kind: Default::default(), axes: std::array::from_fn(|r| axis(r, 0, 50)) };
         let push = Axes { translation: [15, 0, 0], rotation: [0; 3] };
         assert!(!push.moving() && moving(push, Some(short)));
         // A device resting at 100 on every axis: past the raw dead zone, but at rest calibrated.
-        let offset = Calibration { dead_zone_share: 0.0, axes: std::array::from_fn(|r| axis(r, 100, 350)) };
+        let offset = Calibration { dead_zone_share: 0.0, kind: Default::default(), axes: std::array::from_fn(|r| axis(r, 100, 350)) };
         let resting = Axes { translation: [100; 3], rotation: [100; 3] };
         assert!(resting.moving() && !moving(resting, Some(offset)));
         // Without a calibration, as read.

apps/solidcraft/Cargo.toml

@@ -7,6 +7,11 @@ license.workspace = true
 publish = false
 default-run = "solidcraft"
 
+[features]
+default = ["raytrace-cpu", "bundled-render-library"]
+bundled-render-library = ["solidcraft-engine/bundled-render-library"]
+raytrace-cpu = ["solidcraft-engine/raytrace-cpu"]
+
 # The workspace lints, except unsafe_code: denied, not forbidden, so that src/open_documents.rs
 # (macOS file-open events), src/native_crash.rs (Windows exception filter) and src/native_frame.rs
 # (Windows resize border) can allow it: none has a safe API. Keep the rest in sync with [workspace.lints].
@@ -70,6 +75,7 @@ windows-sys = { version = "0.61", features = [
 ] }
 
 [target.'cfg(target_os = "macos")'.dependencies]
+muda = { version = "0.21.2", default-features = false }
 # The 3D mouse through the 3Dconnexion driver, which keeps the device to itself (src/space_mouse.rs).
 solidcraft-3dx-client = { workspace = true }
 # The 3D mouse (src/space_mouse.rs), in the shared-device open mode so that a running 3DxWare
@@ -78,7 +84,7 @@ hidapi = { version = "2.6.7", default-features = false, features = ["macos-share
 # Files opened from Finder and the Dock (src/open_documents.rs); all already come with eframe and rfd.
 objc2 = "0.6"
 objc2-app-kit = { version = "0.3", default-features = false, features = ["std", "NSApplication", "NSResponder"] }
-objc2-foundation = { version = "0.3", default-features = false, features = ["std", "block2", "NSArray", "NSNotification", "NSOperation", "NSString", "NSURL"] }
+objc2-foundation = { version = "0.3", default-features = false, features = ["std", "block2", "NSArray", "NSNotification", "NSOperation", "NSProcessInfo", "NSString", "NSURL"] }
 block2 = "0.6"
 
 [target.'cfg(all(unix, not(target_os = "macos")))'.dependencies]

apps/solidcraft/src/control_server.rs

@@ -11,6 +11,7 @@ use std::time::{Duration, Instant};
 use serde_json::{Value, json};
 use solidcraft_engine::MAX_LINE;
 use solidcraft_engine::control_auth;
+use solidcraft_engine::control_pending;
 use solidcraft_ui_egui::ControlRequest;
 
 /// Connections served at once, so a flood must not be able to spawn threads without end.
@@ -19,7 +20,7 @@ const MAX_CONNECTIONS: usize = 16;
 const MAX_BAD_LINES: usize = 8;
 
 static OPEN: AtomicUsize = AtomicUsize::new(0);
-/// The token files this launch wrote (its `--control` port, the agent chat's endpoint), removed
+/// The token files this launch wrote (its control port, the agent chat's endpoint), removed
 /// when the app ends.
 static TOKEN_FILES: std::sync::Mutex<Vec<std::path::PathBuf>> = std::sync::Mutex::new(Vec::new());
 
@@ -34,17 +35,45 @@ fn new_token() -> Option<String> {
 pub fn remove_token_file() {
     if let Ok(files) = TOKEN_FILES.lock() {
         for p in files.iter() {
-            let _ = std::fs::remove_file(p);
+            control_auth::remove_token_file(p);
         }
     }
+    if let Some(port) = APP_PORT.lock().ok().and_then(|p| *p) {
+        control_auth::remove_current_port(port);
+    }
 }
 
-pub fn start(port: u16, ctx: egui::Context) -> Receiver<ControlRequest> {
+/// The port the app's own channel listens on, for removing the discovery file at exit.
+static APP_PORT: std::sync::Mutex<Option<u16>> = std::sync::Mutex::new(None);
+
+pub fn start(listen_on: control_auth::Listen, ctx: egui::Context) -> Receiver<ControlRequest> {
     let (tx, rx) = channel::<ControlRequest>();
     // Every connection must show the token before anything runs (docs/control-protocol.md).
     match control_auth::env_token().or_else(new_token) {
         Some(token) => {
-            listen(port, token, tx, ctx, false);
+            let listener = match listen_on {
+                control_auth::Listen::Exact(port) => TcpListener::bind(("127.0.0.1", port)),
+                control_auth::Listen::Default => control_auth::bind_with_fallback(control_auth::DEFAULT_PORT, control_auth::PORT_TRIES),
+            };
+            match listener {
+                Ok(l) => {
+                    if let Some(port) = listen_on_listener(l, token, tx, ctx, false) {
+                        if matches!(listen_on, control_auth::Listen::Default) {
+                            eprintln!("solidcraft: control channel on the default port 127.0.0.1:{port} (Preferences > Assistant turns it off)");
+                        }
+                        // The discovery file: where `solidcraft-cli mcp` finds this app with no arguments.
+                        match control_auth::write_current_port(port) {
+                            Ok(_) => {
+                                if let Ok(mut p) = APP_PORT.lock() {
+                                    *p = Some(port);
+                                }
+                            }
+                            Err(e) => eprintln!("solidcraft: could not write the control discovery file ({e})"),
+                        }
+                    }
+                }
+                Err(e) => eprintln!("solidcraft: control server failed to bind 127.0.0.1: {e}"),
+            }
         }
         None => eprintln!("solidcraft: control server not started: no random token available"),
     }
@@ -60,20 +89,20 @@ pub fn listen_agent(tx: Sender<ControlRequest>, ctx: egui::Context) -> Option<u1
         eprintln!("solidcraft: agent chat endpoint not started: no random token available");
         return None;
     };
-    listen(0, token, tx, ctx, true)
-}
-
-/// Listen on `port` (0: a free port the system picks) with `token`; the port it listens on.
-/// `patient`: every request may wait as long as a batch (a person decides on it).
-fn listen(port: u16, token: String, tx: Sender<ControlRequest>, ctx: egui::Context, patient: bool) -> Option<u16> {
-    let listener = match TcpListener::bind(("127.0.0.1", port)) {
+    let listener = match TcpListener::bind(("127.0.0.1", 0)) {
         Ok(l) => l,
         Err(e) => {
-            eprintln!("solidcraft: control server failed to bind 127.0.0.1:{port}: {e}");
+            eprintln!("solidcraft: control server failed to bind 127.0.0.1: {e}");
             return None;
         }
     };
-    let port = listener.local_addr().map(|a| a.port()).unwrap_or(port);
+    listen_on_listener(listener, token, tx, ctx, true)
+}
+
+/// Serve `listener` (loopback) with `token`; the port it listens on.
+/// `patient`: every request may wait as long as a batch (a person decides on it).
+fn listen_on_listener(listener: TcpListener, token: String, tx: Sender<ControlRequest>, ctx: egui::Context, patient: bool) -> Option<u16> {
+    let port = listener.local_addr().ok()?.port();
     match control_auth::token_path(port) {
         Some(path) => match control_auth::write_token_file(&path, &token) {
             Ok(()) => {
@@ -176,6 +205,8 @@ const WAITS: Waits = Waits { short: Duration::from_secs(60), long: Duration::fro
 struct Pending {
     id: Value,
     method: String,
+    /// The request in messages ("`engine.execute` (solid.fillet)").
+    what: String,
     reply: Receiver<Value>,
 }
 
@@ -296,6 +327,35 @@ fn watch(reply: Receiver<Value>, ticket: Ticket) -> Receiver<Value> {
     late_rx
 }
 
+/// The reply text for a request that outlasts its wait. A request that only reads changes
+/// nothing when it finishes; an export or a save still writes its file, and any other request
+/// still applies, as it was not cancelled.
+fn timeout_message(what: &str, effect: control_pending::Effect) -> String {
+    match effect {
+        control_pending::Effect::ReadsOnly => {
+            format!("timeout: {what} is still running in the app ({}); ask `control.pending` for its answer", effect.when_done())
+        }
+        control_pending::Effect::WritesFile => format!(
+            "timeout: {what} is still running in the app and will still write the file when it finishes (it was not cancelled: \
+             don't send it again; the design does not change); ask `control.pending` for its result"
+        ),
+        control_pending::Effect::Changes => format!(
+            "timeout: {what} is still running in the app and will still apply when it finishes (it was not cancelled: don't send it \
+             again); ask `control.pending` for its result"
+        ),
+    }
+}
+
+/// The reply text for a request refused because an earlier one on the connection still runs.
+fn busy_message(p: &Pending, method: &str) -> String {
+    let method: String = method.chars().take(128).collect();
+    format!(
+        "busy: request {} ({}) is still running, so `{method}` was not run; ask `control.pending` for that request's result, then \
+         send this one again",
+        p.id, p.what
+    )
+}
+
 fn serve(stream: TcpStream, token: &str, tx: Sender<ControlRequest>, ctx: egui::Context, patient: bool) {
     serve_with(stream, token, tx, ctx, patient, WAITS, &RUNNING);
 }
@@ -364,7 +424,7 @@ fn serve_with(
                     }
                 } else if let Some(p) = pending.as_ref().filter(|_| late.is_none()) {
                     // Nothing more is queued behind it, to run unseen when it ends.
-                    json!({"ok": false, "busy": true, "error": format!("busy: request {} (`{}`) is still running; ask `control.pending` for its result", p.id, p.method)})
+                    json!({"ok": false, "busy": true, "error": busy_message(p, &method)})
                 } else {
                     if late.is_some() {
                         // Finished, and the client moved on without asking: it is dropped.
@@ -372,6 +432,8 @@ fn serve_with(
                     }
                     // A batch replaces many short requests: the whole of it may take long (#743).
                     let wait = if patient || method == "engine.batch" { waits.long } else { waits.short };
+                    let what = control_pending::describe(&method, &params);
+                    let effect = control_pending::effect(&method, &params);
                     let (req, rrx) = ControlRequest::new(method.clone(), params);
                     let ticket = running.add(connection, &id, &req);
                     if tx.send(req).is_err() {
@@ -381,8 +443,8 @@ fn serve_with(
                     match rrx.recv_timeout(wait) {
                         Ok(r) => r,
                         Err(_) => {
-                            let r = json!({"ok": false, "running": true, "error": format!("timeout: `{method}` is still running in the app and will still apply; ask `control.pending` for its result")});
-                            pending = Some(Pending { id: id.clone(), method, reply: watch(rrx, ticket) });
+                            let r = json!({"ok": false, "running": true, "error": timeout_message(&what, effect)});
+                            pending = Some(Pending { id: id.clone(), method, what, reply: watch(rrx, ticket) });
                             r
                         }
                     }
@@ -577,6 +639,25 @@ mod tests {
         assert_eq!((&r["result"]["pending"], &r["result"]["done"]), (&json!(7), &json!(true)), "{r}");
     }
 
+    /// A timed-out request that only reads is not said to "still apply", nor is one that only
+    /// writes a file (an export, #1989); a change is, by name.
+    #[test]
+    fn timeout_text_tells_reads_from_changes() {
+        let says = |method: &str, p: Value| timeout_message(&control_pending::describe(method, &p), control_pending::effect(method, &p));
+        let read = says("ui.inspect", json!({}));
+        assert!(read.starts_with("timeout") && read.contains("only reads") && !read.contains("will still apply"), "{read}");
+        let read = says("engine.execute", json!({"command": "sketch.inspect"}));
+        assert!(read.contains("only reads") && read.contains("sketch.inspect"), "{read}");
+        let change = says("engine.execute", json!({"command": "solid.fillet"}));
+        assert!(change.starts_with("timeout") && change.contains("will still apply") && change.contains("solid.fillet"), "{change}");
+        let export = says("engine.execute", json!({"command": "file.export", "params": {"path": "/tmp/wall.step"}}));
+        assert!(export.contains("will still write the file") && !export.contains("apply") && export.contains("file.export"), "{export}");
+        let save = says("engine.execute", json!({"command": "file.save"}));
+        assert!(save.contains("will still write the file") && !save.contains("apply"), "{save}");
+        let render = says("ui.render", json!({"path": "/tmp/a.png"}));
+        assert!(render.contains("will still write the file"), "{render}");
+    }
+
     /// #205: a connection runs nothing until a request carries the launch's token; a wrong or
     /// missing token, or garbage, is refused and the connection closed. Once shown, the token
     /// need not be repeated on that connection.

apps/solidcraft/src/main.rs

@@ -8,8 +8,10 @@
 //! A `.step`/`.stp` file opens as a new design holding the file's bodies (an Import feature); a
 //! `.3mf`/`.stl`/`.obj`/`.glb`/`.gltf` file as a new design holding mesh bodies.
 //!
+//! `SOLIDCRAFT_SETTINGS_DIR` selects an explicit absolute settings directory without legacy adoption.
 //! `--control <port>` (or `SOLIDCRAFT_CONTROL_PORT`) starts a localhost JSON-lines control
 //! server: `{"id":1,"method":"engine.execute","params":{"command":"solid.box","params":{…}}}`.
+//! Without them the channel still opens, on the default port, unless Preferences turns it off.
 //! See `solidcraft_ui_egui::control` and docs/control-protocol.md.
 #![cfg_attr(all(target_os = "windows", not(debug_assertions)), windows_subsystem = "windows")]
 #![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]
@@ -25,6 +27,8 @@ mod native_crash;
 #[cfg(target_os = "windows")]
 mod native_frame;
 #[cfg(target_os = "macos")]
+mod native_menu;
+#[cfg(target_os = "macos")]
 mod open_documents;
 #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
 mod space_mouse;
@@ -81,6 +85,8 @@ struct App {
     gpu: Option<LostWatch>,
     #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
     space_mouse: space_mouse::SpaceMouse,
+    #[cfg(target_os = "macos")]
+    native_menu: Option<native_menu::NativeMenu>,
 }
 
 impl eframe::App for App {
@@ -123,6 +129,10 @@ impl eframe::App for App {
         for f in if self.solve.file_picker_busy() { Vec::new() } else { open_documents::take() } {
             self.solve.open_path_async(&f);
         }
+        #[cfg(target_os = "macos")]
+        if let Some(menu) = &mut self.native_menu {
+            menu.tick(&mut self.solve, ctx);
+        }
         self.solve.logic(ctx);
         #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
         if !self.solve.file_picker_busy() {
@@ -132,10 +142,17 @@ impl eframe::App for App {
             ctx.send_viewport_cmd(egui::ViewportCommand::Close);
         }
     }
-    fn raw_input_hook(&mut self, _ctx: &egui::Context, raw: &mut egui::RawInput) {
+    fn raw_input_hook(&mut self, ctx: &egui::Context, raw: &mut egui::RawInput) {
+        #[cfg(target_os = "macos")]
+        if let Some(menu) = &mut self.native_menu {
+            menu.raw_input_hook(&mut self.solve, ctx, raw);
+        }
         // Before the app's own hook, which adds the control channel's events.
         #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
         self.space_mouse.raw_input_hook(self.solve.preferences.space_mouse_enabled, raw);
+        // The 3D mouse's buttons, before the app reads the frame: Esc and held modifiers join its input.
+        #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
+        solidcraft_ui_egui::space_mouse::buttons_hook(&mut self.solve, ctx, self.space_mouse.buttons(), raw);
         self.solve.raw_input_hook(raw);
     }
     fn ui(&mut self, ui: &mut egui::Ui, _frame: &mut eframe::Frame) {
@@ -273,6 +290,7 @@ fn services(cc: &eframe::CreationContext<'_>) -> Services {
             Box::pin(async move { future.await.map(|p| p.path().to_string_lossy().into_owned()) })
         })),
         graphics_path: graphics_path().map(|p| p.to_string_lossy().to_string()),
+        window_system: window_system_now(),
         http_get: Some(std::sync::Arc::new(http_get)),
         http_download: Some(std::sync::Arc::new(http_download)),
         // Already an installed app: only the browser build offers to install.
@@ -442,14 +460,15 @@ fn http_call(url: &str, timeout: std::time::Duration) -> Result<ureq::http::Resp
 }
 
 /// The per-user settings folder: eframe's storage (`app.ron`) and the anti-aliasing preference.
-fn settings_dir() -> Option<std::path::PathBuf> {
-    eframe::storage_dir("SolidCraft")
+fn settings_dir() -> Result<Option<std::path::PathBuf>, String> {
+    let selected = std::env::var_os("SOLIDCRAFT_SETTINGS_DIR");
+    startup::settings_directory(selected.as_deref(), eframe::storage_dir("SolidCraft"))
 }
 
 /// The anti-aliasing preference, kept next to eframe's storage (it is needed before the
 /// window opens).
 fn graphics_path() -> Option<std::path::PathBuf> {
-    settings_dir().map(|d| d.join("graphics.json"))
+    settings_dir().ok().flatten().map(|d| d.join("graphics.json"))
 }
 
 /// Compatibility shim (docs/compatibility.md): on the first launch after the rename, copy the
@@ -459,7 +478,7 @@ fn graphics_path() -> Option<std::path::PathBuf> {
 /// old app id's `~/.var/app` folder; that copy comes first, as it is the newest. The old folders
 /// are never changed.
 fn adopt_legacy_settings() {
-    let (Some(current), Some(legacy)) = (settings_dir(), eframe::storage_dir("SolveCraft")) else { return };
+    let (Some(current), Some(legacy)) = (settings_dir().ok().flatten(), eframe::storage_dir("SolveCraft")) else { return };
     let legacy_eframe = eframe::storage_dir(solidcraft_engine::io::LEGACY_APP_ID);
     let old_flatpak = solidcraft_engine::io::legacy_flatpak_path(&current);
     if let Err(e) = adopt_settings(&current, old_flatpak.as_deref(), &legacy, legacy_eframe.as_deref()) {
@@ -556,8 +575,14 @@ fn app_viewport() -> Result<egui::ViewportBuilder, eframe::Error> {
 const APP_ID: &str = solidcraft_engine::io::APP_ID;
 
 fn main() -> eframe::Result {
+    #[cfg(target_os = "macos")]
+    objc2_foundation::NSProcessInfo::processInfo().setProcessName(objc2_foundation::ns_string!("SolidCraft"));
     mark("main");
-    adopt_legacy_settings();
+    // Validate before legacy adoption, crash markers or any user preference read.
+    let settings = settings_dir().map_err(|error| eframe::Error::AppCreation(error.into()))?;
+    if std::env::var_os("SOLIDCRAFT_SETTINGS_DIR").is_none() {
+        adopt_legacy_settings();
+    }
     let mut safe_mode = startup::env_on(std::env::var(startup::SAFE_MODE_ENV).ok().as_deref());
     let mut control_port: Option<u16> = solidcraft_engine::geom::env::var("CONTROL_PORT").and_then(|p| p.parse().ok());
     let mut files = Vec::new();
@@ -594,7 +619,6 @@ fn main() -> eframe::Result {
     }
     // Settings that don't read are moved aside; launches that never got a window are counted,
     // and after a few in a row this one starts in safe mode (docs/book/src/guide/troubleshooting.md).
-    let settings = settings_dir();
     let mut notes: Vec<String> = Vec::new();
     let mut failed_starts = 0;
     if let Some(dir) = &settings {
@@ -657,12 +681,24 @@ fn main() -> eframe::Result {
     #[cfg(all(unix, not(target_os = "macos")))]
     let mut options = options;
     #[cfg(all(unix, not(target_os = "macos")))]
-    if prefer_x11(
-        std::env::var_os("DISPLAY").is_some(),
-        std::env::var_os("WAYLAND_DISPLAY").is_some(),
-        std::env::var("XDG_CURRENT_DESKTOP").ok().as_deref(),
-        solidcraft_engine::geom::env::var("WAYLAND").as_deref(),
-    ) {
+    let x11 = {
+        // SOLIDCRAFT_WAYLAND wins over Preferences › Graphics › Window system (#3083).
+        let environment = solidcraft_engine::geom::env::var("WAYLAND");
+        let preference = window_system_preference();
+        let wayland_override = environment.as_deref().or(window_system_override(preference.as_deref()));
+        let wayland_display = std::env::var_os("WAYLAND_DISPLAY").is_some();
+        let x11 = prefer_x11(
+            std::env::var_os("DISPLAY").is_some(),
+            wayland_display,
+            std::env::var("XDG_CURRENT_DESKTOP").ok().as_deref(),
+            wayland_override,
+        );
+        // Without a Wayland socket winit opens on X11 anyway.
+        let _ = WINDOW_SYSTEM.set(if x11 || !wayland_display { "x11" } else { "wayland" });
+        x11
+    };
+    #[cfg(all(unix, not(target_os = "macos")))]
+    if x11 {
         options.event_loop_builder = Some(Box::new(|b| {
             use winit::platform::x11::EventLoopBuilderExtX11;
             b.with_x11();
@@ -727,8 +763,10 @@ fn main() -> eframe::Result {
                 ));
             }
             mark("viewport pipelines");
-            if let Some(port) = control_port {
-                let rx = control_server::start(port, cc.egui_ctx.clone());
+            // `--control`/the environment name a port; otherwise the preference (on by default)
+            // opens the default one (docs/control-protocol.md).
+            if let Some(listen_on) = solidcraft_engine::control_auth::plan(control_port, app.preferences.agent_control) {
+                let rx = control_server::start(listen_on, cc.egui_ctx.clone());
                 app = app.with_control(rx);
             }
             // The agent chat's MCP bridge reaches the app through an endpoint of its own, started
@@ -779,6 +817,18 @@ fn main() -> eframe::Result {
             }
             #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
             let space_mouse = space_mouse::SpaceMouse::start(&cc.egui_ctx);
+            #[cfg(target_os = "macos")]
+            let native_menu = match native_menu::NativeMenu::new(&app, &cc.egui_ctx) {
+                Ok(menu) => Some(menu),
+                Err(error) => {
+                    app.set_status(format!("System menu: {error}"), true);
+                    None
+                }
+            };
+            #[cfg(target_os = "macos")]
+            {
+                app.native_file_menu = native_menu.is_some();
+            }
             mark("app created");
             solidcraft_engine::crash::phase("first frame");
             Ok(Box::new(App {
@@ -789,6 +839,8 @@ fn main() -> eframe::Result {
                 gpu,
                 #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
                 space_mouse,
+                #[cfg(target_os = "macos")]
+                native_menu,
             }))
         }),
     );
@@ -856,6 +908,36 @@ fn no_window(error: eframe::Error, tried_cpu: bool, settings: Option<&std::path:
     Err(error)
 }
 
+/// Linux: the window system this run opened with (`wayland` or `x11`), for Preferences (#3083).
+#[cfg(all(unix, not(target_os = "macos")))]
+static WINDOW_SYSTEM: std::sync::OnceLock<&'static str> = std::sync::OnceLock::new();
+
+/// The window system this run uses, where there is a choice (Linux).
+fn window_system_now() -> Option<&'static str> {
+    #[cfg(all(unix, not(target_os = "macos")))]
+    return WINDOW_SYSTEM.get().copied();
+    #[cfg(not(all(unix, not(target_os = "macos"))))]
+    None
+}
+
+/// Preferences › Graphics › Window system (`graphics.json`'s `window_system`), read before the
+/// window opens.
+#[cfg(all(unix, not(target_os = "macos")))]
+fn window_system_preference() -> Option<String> {
+    graphics().and_then(|v| v.get("window_system").and_then(serde_json::Value::as_str).map(str::to_string))
+}
+
+/// The window system preference as the `SOLIDCRAFT_WAYLAND` value it stands for: `wayland` is
+/// `1`, `x11` is `0`, and `auto` (or anything else) leaves the choice to [`prefer_x11`].
+#[cfg(all(unix, not(target_os = "macos")))]
+fn window_system_override(preference: Option<&str>) -> Option<&'static str> {
+    match preference.map(str::trim) {
+        Some("wayland") => Some("1"),
+        Some("x11") => Some("0"),
+        _ => None,
+    }
+}
+
 /// Whether to run through XWayland rather than native Wayland. winit has no file drag-and-drop
 /// on Wayland (only on X11), so dropping files from the file manager showed a "no" cursor: use
 /// XWayland when it's there. Except on niri, whose XWayland (xwayland-satellite) breaks window
@@ -893,6 +975,19 @@ mod backend_tests {
         assert!(prefer_x11(true, true, Some("niri"), Some("0")));
         assert!(!prefer_x11(false, true, Some("niri"), Some("0")));
     }
+
+    /// Preferences › Graphics › Window system stands for the same values (#3083).
+    #[test]
+    fn the_window_system_preference_maps_to_the_override() {
+        use super::window_system_override as over;
+        assert_eq!(
+            (over(Some("wayland")), over(Some("x11")), over(Some("auto")), over(None), over(Some("junk"))),
+            (Some("1"), Some("0"), None, None, None)
+        );
+        // Wayland chosen on GNOME keeps native Wayland; X11 chosen on niri goes through XWayland.
+        assert!(!prefer_x11(true, true, Some("GNOME"), over(Some("wayland"))));
+        assert!(prefer_x11(true, true, Some("niri"), over(Some("x11"))));
+    }
 }
 
 #[cfg(test)]

apps/solidcraft/src/native_menu.rs

@@ -0,0 +1,189 @@
+//! macOS system menus, owned and updated on eframe's main thread.
+
+use std::sync::mpsc::{Receiver, sync_channel};
+
+use muda::{
+    AboutMetadata, Menu, MenuEvent, MenuItem, PredefinedMenuItem, Submenu,
+    accelerator::{Accelerator, Code, Modifiers},
+};
+use solidcraft_ui_egui::{SolveApp, toolbar::FileAction};
+
+pub struct NativeMenu {
+    menu: Menu,
+    actions: Vec<(MenuItem, FileAction)>,
+    help_actions: Vec<(MenuItem, &'static str)>,
+    events: Receiver<MenuEvent>,
+    recent: Submenu,
+    recent_paths: Vec<String>,
+}
+
+impl NativeMenu {
+    pub fn new(app: &SolveApp, ctx: &egui::Context) -> muda::Result<Self> {
+        let menu = Menu::new();
+        let application = Submenu::new("SolidCraft", true);
+        let file = Submenu::new(app.tr("ui.file"), true);
+        let edit = Submenu::new(app.tr_label("Edit"), true);
+        let recent = Submenu::new(app.tr("ui.open_recent"), true);
+        let window = Submenu::new("Window", true);
+        let help = Submenu::new(app.tr("ui.help"), true);
+        let mut help_actions = Vec::new();
+        let mut actions = Vec::new();
+        let mut add = |parent: &Submenu, label: &str, action: FileAction, shortcut: Option<Accelerator>| -> muda::Result<()> {
+            let item = MenuItem::new(label, Self::action_enabled(&action, app, ctx), shortcut);
+            parent.append(&item)?;
+            actions.push((item, action));
+            Ok(())
+        };
+        application.append(&PredefinedMenuItem::about(
+            Some("About SolidCraft"),
+            Some(AboutMetadata { name: Some("SolidCraft".into()), version: Some(env!("CARGO_PKG_VERSION").into()), ..Default::default() }),
+        ))?;
+        application.append(&PredefinedMenuItem::separator())?;
+        add(
+            &application,
+            &format!("{}\u{2026}", app.tr("ui.preferences")),
+            FileAction::Settings,
+            Some(Accelerator::new(Modifiers::META, Code::Comma)),
+        )?;
+        add(&application, &format!("{}\u{2026}", app.tr("ui.keyboard_shortcuts")), FileAction::Shortcuts, None)?;
+        application.append(&PredefinedMenuItem::separator())?;
+        application.append(&PredefinedMenuItem::services(None))?;
+        application.append(&PredefinedMenuItem::separator())?;
+        application.append_items(&[
+            &PredefinedMenuItem::hide(Some("Hide SolidCraft")),
+            &PredefinedMenuItem::hide_others(None),
+            &PredefinedMenuItem::show_all(None),
+            &PredefinedMenuItem::separator(),
+        ])?;
+        add(&application, &format!("{} SolidCraft", app.tr("ui.quit")), FileAction::Quit, Some(Accelerator::new(Modifiers::META, Code::KeyQ)))?;
+        add(&file, app.tr("ui.new_design"), FileAction::New, Some(Accelerator::new(Modifiers::META, Code::KeyN)))?;
+        add(&file, &format!("{}\u{2026}", app.tr("ui.open")), FileAction::Open, Some(Accelerator::new(Modifiers::META, Code::KeyO)))?;
+        file.append(&recent)?;
+        file.append(&PredefinedMenuItem::separator())?;
+        for (label, command) in
+            [("Insert STEP\u{2026}", "file.insert_step"), ("Insert Mesh\u{2026}", "file.insert_mesh"), ("Insert Design", "component.insert_design")]
+        {
+            add(&file, app.tr_label(label), FileAction::Command(command), None)?;
+        }
+        file.append(&PredefinedMenuItem::separator())?;
+        add(&file, app.tr("ui.save"), FileAction::Save, Some(Accelerator::new(Modifiers::META, Code::KeyS)))?;
+        add(
+            &file,
+            &format!("{}\u{2026}", app.tr("ui.save_as")),
+            FileAction::SaveAs,
+            Some(Accelerator::new(Modifiers::META | Modifiers::SHIFT, Code::KeyS)),
+        )?;
+        add(&file, app.tr_label("Save As JSON\u{2026}"), FileAction::SaveJson, None)?;
+        file.append(&PredefinedMenuItem::separator())?;
+        for (label, action) in [
+            ("Export STL\u{2026}", FileAction::ExportMesh("stl")),
+            ("Export 3MF\u{2026}", FileAction::ExportMesh("3mf")),
+            ("Export STEP\u{2026}", FileAction::Export("step")),
+            ("Export Current View as DXF\u{2026}", FileAction::Command("file.export_view_dxf")),
+            ("Export OBJ\u{2026}", FileAction::Export("obj")),
+            ("Export URDF\u{2026}", FileAction::Export("urdf")),
+            ("Export Design as JSON\u{2026}", FileAction::Export("json")),
+        ] {
+            add(&file, app.tr_label(label), action, None)?;
+        }
+        file.append(&PredefinedMenuItem::separator())?;
+        add(&file, app.tr_label("Design Properties"), FileAction::Command("document.metadata"), None)?;
+        add(&edit, app.tr("ui.undo"), FileAction::Undo, Some(Accelerator::new(Modifiers::META, Code::KeyZ)))?;
+        add(&edit, app.tr("ui.redo"), FileAction::Redo, Some(Accelerator::new(Modifiers::META | Modifiers::SHIFT, Code::KeyZ)))?;
+        add(&window, app.tr_label("Agent Chat"), FileAction::AgentChat, None)?;
+        window.append(&PredefinedMenuItem::separator())?;
+        window.append_items(&[
+            &PredefinedMenuItem::minimize(None),
+            &PredefinedMenuItem::maximize(None),
+            &PredefinedMenuItem::fullscreen(None),
+            &PredefinedMenuItem::separator(),
+            &PredefinedMenuItem::bring_all_to_front(None),
+        ])?;
+        for (action, label) in [
+            ("docs", "Documentation"),
+            ("shortcuts", "Keyboard Shortcuts"),
+            ("messages", "Messages\u{2026}"),
+            ("report", "Report an Issue\u{2026}"),
+            ("crashes", "Crash Reports\u{2026}"),
+        ] {
+            let item = MenuItem::new(app.tr_label(label), true, None);
+            help.append(&item)?;
+            help_actions.push((item, action));
+        }
+        menu.append_items(&[&application, &file, &edit, &window, &help])?;
+        let (sender, events) = sync_channel(64);
+        let ctx = ctx.clone();
+        MenuEvent::set_event_handler(Some(move |event| {
+            let _ = sender.try_send(event);
+            ctx.request_repaint();
+        }));
+        menu.init_for_nsapp();
+        let mut native = Self { menu, actions, help_actions, events, recent, recent_paths: Vec::new() };
+        native.update_recent(app)?;
+        Ok(native)
+    }
+
+    pub fn raw_input_hook(&mut self, app: &mut SolveApp, ctx: &egui::Context, raw: &mut egui::RawInput) {
+        for event in self.events.try_iter().take(64) {
+            if let Some((_, action)) = self.help_actions.iter().find(|(item, _)| item.id() == &event.id) {
+                solidcraft_ui_egui::help::run(app, ctx, action);
+            }
+            if let Some((_, action)) = self.actions.iter().find(|(item, _)| item.id() == &event.id) {
+                if matches!(action, FileAction::Undo | FileAction::Redo) && ctx.egui_wants_keyboard_input() {
+                    raw.events.push(egui::Event::Key {
+                        key: egui::Key::Z,
+                        physical_key: None,
+                        pressed: true,
+                        repeat: false,
+                        modifiers: egui::Modifiers { command: true, mac_cmd: true, shift: matches!(action, FileAction::Redo), ..Default::default() },
+                    });
+                } else {
+                    action.run(app);
+                }
+            }
+        }
+    }
+
+    fn action_enabled(action: &FileAction, app: &SolveApp, ctx: &egui::Context) -> bool {
+        action.enabled(app)
+            || (matches!(action, FileAction::Undo | FileAction::Redo) && ctx.egui_wants_keyboard_input() && FileAction::Settings.enabled(app))
+    }
+
+    pub fn tick(&mut self, app: &mut SolveApp, ctx: &egui::Context) {
+        for (item, action) in &self.actions {
+            let enabled = Self::action_enabled(action, app, ctx);
+            if item.is_enabled() != enabled {
+                item.set_enabled(enabled);
+            }
+        }
+        if !self.recent_paths.iter().eq(app.home.recent.iter().take(32))
+            && let Err(error) = self.update_recent(app)
+        {
+            app.set_status(format!("Recent designs menu: {error}"), true);
+        }
+    }
+
+    fn update_recent(&mut self, app: &SolveApp) -> muda::Result<()> {
+        while self.recent.remove_at(0).is_some() {}
+        self.actions.retain(|(_, action)| !matches!(action, FileAction::OpenRecent(_) | FileAction::ClearRecent));
+        self.recent_paths = app.home.recent.iter().take(32).cloned().collect();
+        for path in &self.recent_paths {
+            let action = FileAction::OpenRecent(path.clone());
+            let item = MenuItem::new(path, action.enabled(app), None);
+            self.recent.append(&item)?;
+            self.actions.push((item, action));
+        }
+        self.recent.append(&PredefinedMenuItem::separator())?;
+        let clear = MenuItem::new(app.tr("ui.clear_recent"), !self.recent_paths.is_empty(), None);
+        self.recent.append(&clear)?;
+        self.actions.push((clear, FileAction::ClearRecent));
+        Ok(())
+    }
+}
+
+impl Drop for NativeMenu {
+    fn drop(&mut self) {
+        MenuEvent::set_event_handler(None::<fn(MenuEvent)>);
+        self.menu.remove_for_nsapp();
+    }
+}

apps/solidcraft/src/space_mouse/hidraw.rs

@@ -15,6 +15,12 @@ const DEV: &str = "/dev";
 /// a read with nothing to read returns at once and the reader can see whether it should stop.
 pub const O_NONBLOCK: i32 = 0o4000;
 
+/// Opens a hidraw node the way the Direct reader reads it: read-only and non-blocking.
+pub fn open(path: &Path) -> std::io::Result<std::fs::File> {
+    use std::os::unix::fs::OpenOptionsExt;
+    std::fs::OpenOptions::new().read(true).custom_flags(O_NONBLOCK).open(path)
+}
+
 /// How long the reader waits when the device has nothing to say, which is also the most a report
 /// can be delayed.
 const IDLE_POLL: Duration = Duration::from_millis(5);
@@ -76,6 +82,44 @@ fn ids(uevent: &str) -> Option<(u16, u16)> {
 mod tests {
     use super::*;
 
+    /// A real EACCES, as a user without the udev rule gets: a file of the user's own with no permission
+    /// bits. Skipped for root, which can open anything.
+    #[test]
+    fn a_device_without_permission_is_denied_and_the_daemon_takes_over_within_the_backoff() {
+        use std::os::unix::fs::{MetadataExt, PermissionsExt};
+        if std::fs::metadata("/proc/self").is_ok_and(|meta| meta.uid() == 0) {
+            return;
+        }
+        let dir = std::env::temp_dir().join(format!("sc-hidraw-denied-{}", std::process::id()));
+        std::fs::create_dir_all(&dir).unwrap();
+        let node = dir.join("hidraw0");
+        std::fs::write(&node, [0_u8; 4]).unwrap();
+        std::fs::set_permissions(&node, std::fs::Permissions::from_mode(0o000)).unwrap();
+        let denied = open(&node);
+        std::fs::set_permissions(&node, std::fs::Permissions::from_mode(0o600)).unwrap();
+        assert!(open(&node).is_ok(), "the same node opens once it is readable");
+        std::fs::remove_dir_all(&dir).ok();
+        assert_eq!(denied.err().map(|error| error.kind()), Some(std::io::ErrorKind::PermissionDenied));
+        // The failure is the choice's `since_failed`, with an injected clock: inside the backoff the
+        // daemon is read, whichever driver was asked for; after it the device is tried again.
+        use super::super::{Pick, SpaceMouseDriver, UNREADABLE_RETRY, choose, direct_usable};
+        for wanted in [SpaceMouseDriver::Automatic, SpaceMouseDriver::Spacenavd, SpaceMouseDriver::Direct] {
+            for ago in [Duration::ZERO, Duration::from_secs(29)] {
+                assert_eq!(choose(wanted, true, direct_usable(true, Some(ago), UNREADABLE_RETRY)), Some(Pick::Spacenavd), "{wanted:?} {ago:?}");
+            }
+        }
+        assert_eq!(choose(SpaceMouseDriver::Direct, true, direct_usable(true, Some(UNREADABLE_RETRY), UNREADABLE_RETRY)), Some(Pick::Direct));
+        // And the daemon's own reader delivers over a fake connection.
+        let (mut daemon, client) = std::os::unix::net::UnixStream::pair().unwrap();
+        let mut record = [0_u8; 32];
+        record[4..8].copy_from_slice(&100_i32.to_ne_bytes());
+        std::io::Write::write_all(&mut daemon, &record).unwrap();
+        drop(daemon);
+        let mut seen = 0;
+        super::super::spacenavd::read(client, |_| seen += 1, |_, _| {}, || false, Duration::from_secs(3600));
+        assert_eq!(seen, 1);
+    }
+
     #[test]
     fn reports_come_through_idle_gaps_until_the_device_ends_or_a_stop() {
         use crate::space_mouse::fake::Script;

apps/solidcraft/src/space_mouse/spacenavd.rs

@@ -3,7 +3,8 @@
 //! to its clients, so a program that reads the HID device itself bypasses that setup. Over its
 //! socket the daemon sends fixed 32-byte records: eight native-endian `i32`, the first the kind of
 //! record (0 for motion, then x y z rx ry rz and the milliseconds since the last record).
-//! Other records (button presses, from newer daemons also configuration changes) are ignored.
+//! Button records (1 pressed, 2 released, then the button's number from 0) are read too; other
+//! records (from newer daemons also configuration changes) are ignored.
 //!
 //! The socket is plain file I/O, so no library is needed, and it needs no udev rule: the daemon
 //! is what has access to the device.
@@ -11,6 +12,7 @@
 use std::io::Read;
 use std::os::unix::net::UnixStream;
 use std::path::Path;
+use std::time::{Duration, Instant};
 
 use solidcraft_ui_egui::space_mouse::{Axes, FULL_SCALE};
 
@@ -54,6 +56,22 @@ fn decode(record: &[u8; RECORD_BYTES]) -> Option<Axes> {
     })
 }
 
+/// The button a button record is about, from 0, and whether it went down; `None` for any other
+/// record, or a button past the 32 a bitmask holds.
+fn button(record: &[u8; RECORD_BYTES]) -> Option<(u32, bool)> {
+    let mut data = [0_i32; 2];
+    for (slot, bytes) in data.iter_mut().zip(record.as_chunks::<4>().0) {
+        *slot = i32::from_ne_bytes(*bytes);
+    }
+    let [kind, number] = data;
+    let number = u32::try_from(number).ok().filter(|&n| n < 32)?;
+    match kind {
+        1 => Some((number, true)),
+        2 => Some((number, false)),
+        _ => None,
+    }
+}
+
 /// A daemon value in our raw units. Out-of-range values stay in `i16`: they are input from another
 /// process.
 fn unit(value: impl Into<i64>) -> i16 {
@@ -61,14 +79,30 @@ fn unit(value: impl Into<i64>) -> i16 {
     i16::try_from(scaled.clamp(i64::from(i16::MIN), i64::from(i16::MAX))).unwrap_or_default()
 }
 
-/// Hands every motion record to `publish` until the daemon closes the connection or fails, or
-/// `stop` says so. A stream with a read timeout (`set_read_timeout`) times out when the daemon is
-/// quiet, which is no record and no disconnect: `stop` is asked, and the read goes on, with what
-/// of a record had arrived kept. A partial record at the end is dropped.
-pub fn read(mut stream: impl Read, mut publish: impl FnMut(Axes), mut stop: impl FnMut() -> bool) {
+/// Hands every motion record to `publish` and every button record to `pressed` until the daemon
+/// closes the connection or fails, or `stop` says so. A stream with a read timeout
+/// (`set_read_timeout`) times out when the daemon is quiet, which is no record and no disconnect:
+/// `stop` is asked, and the read goes on, with what of a record had arrived kept. `stop` is also asked
+/// at least every `check_every` while records keep arriving, so a daemon that never pauses for that
+/// long (a moving cap sends every few milliseconds) does not keep the reader from noticing that the
+/// device it prefers is back. A partial record at the end is dropped.
+pub fn read(
+    mut stream: impl Read,
+    mut publish: impl FnMut(Axes),
+    mut pressed: impl FnMut(u32, bool),
+    mut stop: impl FnMut() -> bool,
+    check_every: Duration,
+) {
     let mut record = [0_u8; RECORD_BYTES];
     let mut filled = 0;
+    let mut asked = Instant::now();
     loop {
+        if asked.elapsed() >= check_every {
+            asked = Instant::now();
+            if stop() {
+                return;
+            }
+        }
         match stream.read(record.get_mut(filled..).unwrap_or_default()) {
             Ok(0) => {
                 log::info!("3D mouse: spacenavd connection ended");
@@ -80,11 +114,14 @@ pub fn read(mut stream: impl Read, mut publish: impl FnMut(Axes), mut stop: impl
                     filled = 0;
                     if let Some(axes) = decode(&record) {
                         publish(axes);
+                    } else if let Some((number, down)) = button(&record) {
+                        pressed(number, down);
                     }
                 }
             }
             Err(error) if error.kind() == std::io::ErrorKind::Interrupted => {}
             Err(error) if matches!(error.kind(), std::io::ErrorKind::WouldBlock | std::io::ErrorKind::TimedOut) => {
+                asked = Instant::now();
                 if stop() {
                     return;
                 }
@@ -134,6 +171,10 @@ mod tests {
     fn other_records_and_hostile_values_are_harmless() {
         // A button record (kind 1, press) and one of an unknown kind are not motion.
         assert_eq!(decode(&record([1, 0, 1, 0, 0, 0, 0, 0])), None);
+        // Nor are hostile button numbers a button.
+        assert_eq!(button(&record([1, -1, 0, 0, 0, 0, 0, 0])), None);
+        assert_eq!(button(&record([1, i32::MAX, 0, 0, 0, 0, 0, 0])), None);
+        assert_eq!(button(&record([7, 3, 0, 0, 0, 0, 0, 0])), None);
         assert_eq!(decode(&record([7, 500, 500, 500, 500, 500, 500, 0])), None);
         // Nothing overflows on the extremes of `i32`.
         let extreme = decode(&record([0, i32::MIN, i32::MIN, i32::MAX, i32::MAX, i32::MIN, i32::MIN, -1]));
@@ -147,14 +188,17 @@ mod tests {
         let (mut daemon, client) = UnixStream::pair().expect("a socket pair");
         let mut bytes = Vec::new();
         bytes.extend(record([0, 100, 0, 0, 0, 0, 0, 8]));
-        bytes.extend(record([2, 1, 0, 0, 0, 0, 0, 0])); // a button release: skipped
+        bytes.extend(record([1, 4, 0, 0, 0, 0, 0, 0])); // button 4 down
+        bytes.extend(record([2, 4, 0, 0, 0, 0, 0, 0])); // and up
+        bytes.extend(record([1, 40, 0, 0, 0, 0, 0, 0])); // past the 32 a bitmask holds: skipped
         bytes.extend(record([0, 0, 0, 0, 0, 0, 0, 900]));
         bytes.extend([1, 2, 3]); // the daemon went away mid-record
         daemon.write_all(&bytes).expect("written");
         drop(daemon);
-        let mut seen = Vec::new();
-        read(client, |axes| seen.push(axes.translation), || false);
+        let (mut seen, mut buttons) = (Vec::new(), Vec::new());
+        read(client, |axes| seen.push(axes.translation), |number, down| buttons.push((number, down)), || false, Duration::from_secs(3600));
         assert_eq!(seen, [[70, 0, 0], [0, 0, 0]]);
+        assert_eq!(buttons, [(4, true), (4, false)]);
     }
 
     #[test]
@@ -168,10 +212,12 @@ mod tests {
         read(
             script,
             |axes| seen.push(axes.translation),
+            |_, _| {},
             || {
                 asked += 1;
                 false
             },
+            Duration::from_secs(3600),
         );
         assert_eq!(seen, [[70, 0, 0]]);
         assert_eq!(asked, 4, "each timeout asks whether to stop");
@@ -184,10 +230,44 @@ mod tests {
         let mut script = Script::new();
         script.data(&bytes).timeout(std::io::ErrorKind::WouldBlock).data(&bytes);
         let mut seen = 0;
-        read(script, |_| seen += 1, || true);
+        read(script, |_| seen += 1, |_, _| {}, || true, Duration::from_secs(3600));
         assert_eq!(seen, 1, "the record before the timeout arrived; the one after never was read");
     }
 
+    /// A daemon that never goes quiet (a moving cap sends every few milliseconds) is still asked whether to
+    /// stop, at the interval given, so the reader can go back to a device that returned.
+    #[test]
+    fn a_busy_daemon_is_asked_whether_to_stop_on_a_timer() {
+        // Ends by itself after half a second, so a read that never asks fails the assertion below
+        // instead of hanging the test.
+        struct Busy(Instant);
+        impl Read for Busy {
+            fn read(&mut self, buf: &mut [u8]) -> std::io::Result<usize> {
+                if self.0.elapsed() > Duration::from_millis(500) {
+                    return Ok(0);
+                }
+                std::thread::sleep(Duration::from_millis(2));
+                let bytes = record([0, 100, 0, 0, 0, 0, 0, 8]);
+                let size = bytes.len().min(buf.len());
+                buf[..size].copy_from_slice(&bytes[..size]);
+                Ok(size)
+            }
+        }
+        let (mut seen, mut asked) = (0, 0);
+        read(
+            Busy(Instant::now()),
+            |_| seen += 1,
+            |_, _| {},
+            || {
+                asked += 1;
+                asked == 3
+            },
+            Duration::from_millis(10),
+        );
+        assert_eq!(asked, 3, "asked on the timer although no read ever timed out");
+        assert!(seen > 3, "records kept coming meanwhile: {seen}");
+    }
+
     #[test]
     fn no_daemon_means_no_connection() {
         let missing = std::env::temp_dir().join(format!("sc-no-spnav-{}.sock", std::process::id()));

apps/solidcraft/src/startup.rs

@@ -21,6 +21,25 @@ pub const RENDERER_ENV: &str = "SOLIDCRAFT_RENDERER";
 pub const FAILED_STARTS_FOR_SAFE_MODE: u32 = 2;
 const MARKER: &str = "starting";
 
+/// Explicit application-settings isolation for side-by-side builds and native UI
+/// acceptance. A supplied invalid path refuses startup rather than falling back
+/// to the user's ordinary settings. No directory is read or created here.
+pub fn settings_directory(override_path: Option<&std::ffi::OsStr>, default: Option<PathBuf>) -> Result<Option<PathBuf>, String> {
+    match override_path {
+        None => Ok(default),
+        Some(raw) => {
+            let path = PathBuf::from(raw);
+            if raw.is_empty() || !path.is_absolute() {
+                return Err("SOLIDCRAFT_SETTINGS_DIR must be a nonempty absolute directory path".into());
+            }
+            if path.exists() && !path.is_dir() {
+                return Err("SOLIDCRAFT_SETTINGS_DIR names a file, not a directory".into());
+            }
+            Ok(Some(path))
+        }
+    }
+}
+
 /// Whether an environment value switches something on.
 pub fn env_on(v: Option<&str>) -> bool {
     v.map(str::trim).is_some_and(|v| !v.is_empty() && v != "0" && !v.eq_ignore_ascii_case("false"))
@@ -214,6 +233,19 @@ mod tests {
         d
     }
 
+    #[test]
+    fn isolated_settings_are_explicit_absolute_and_never_fall_back() {
+        let default = std::env::temp_dir().join("ordinary-settings");
+        assert_eq!(settings_directory(None, Some(default.clone())).unwrap(), Some(default.clone()));
+        let selected = std::env::temp_dir().join("solidcraft-isolated-settings-fixture");
+        assert_eq!(settings_directory(Some(selected.as_os_str()), Some(default.clone())).unwrap(), Some(selected));
+        for raw in ["", "relative/settings", "../ordinary"] {
+            assert!(settings_directory(Some(std::ffi::OsStr::new(raw)), Some(default.clone())).is_err());
+        }
+        let file = std::env::current_exe().unwrap();
+        assert!(settings_directory(Some(file.as_os_str()), Some(default)).is_err());
+    }
+
     #[test]
     fn switches_read_from_the_environment() {
         assert!(env_on(Some("1")) && env_on(Some("yes")) && !env_on(Some("0")) && !env_on(Some(" ")) && !env_on(None) && !env_on(Some("false")));

assets/appearances/opaque_finishes.rs

@@ -0,0 +1,11 @@
+//! Original illustrative opaque finishes; not measured optical or engineering data.
+//! (name, sRGB color, metal fraction, perceptual roughness). IOR is an illustrative 1.5.
+//! Separate names preserve the scalar library's appearance and saved assignments.
+pub const OPAQUE_FINISHES: [(&str, [u8; 3], f64, f64); 6] = [
+    ("Steel - Satin PBR", [158, 164, 172], 1.0, 0.4),
+    ("Aluminum - Satin PBR", [204, 208, 214], 1.0, 0.3),
+    ("Copper - Clean PBR", [204, 122, 80], 1.0, 0.25),
+    ("ABS - Molded PBR", [222, 222, 216], 0.0, 0.4),
+    ("PLA - Smooth PBR", [110, 160, 222], 0.0, 0.35),
+    ("Wood - Oak Uniform PBR Preview", [190, 146, 92], 0.0, 0.65),
+];

assets/appearances/starter_pack.rs

@@ -0,0 +1,292 @@
+//! Original starter visual data, MIT OR Apache-2.0. No external material library.
+use crate::appearance_pack::{Category, GlassBoundary, GlassRecipe, OpaqueRecipe, TextureAxis, TextureRecipe, VisualPreset};
+
+const WOOD: &str = "Uniform opaque preview only; grain resources/mapping are not applied";
+const SOLAR: &str = "Uniform opaque preview only; no cell grid, busbars, electricity or efficiency claim";
+const REGOLITH: &str = "Uniform opaque preview only; no granular displacement or measured lunar optical data";
+const OPAQUE: &str = "Illustrative opaque isotropic PBR; no measured alloy, polymer or engineering properties";
+
+const fn look(color: [u8; 3], metallic: f64, roughness: f64, dielectric_ior: f64) -> OpaqueRecipe {
+    OpaqueRecipe { color, metallic, roughness, dielectric_ior }
+}
+const fn maps(id: &'static str, repeat_mm: [f64; 2], grain: bool) -> Option<TextureRecipe> {
+    Some(TextureRecipe { id, repeat_mm, grain_axis: if grain { Some(TextureAxis::V) } else { None } })
+}
+const fn glass(transmission_linear_rgb: [f64; 3], ior: f64, reference_path_mm: f64, boundary: GlassBoundary) -> GlassRecipe {
+    GlassRecipe { transmission_linear_rgb, dielectric_ior: ior, reference_path_mm, boundary }
+}
+
+pub const STARTER_PACK: [VisualPreset; 40] = [
+    VisualPreset::opaque(
+        "starter.wood.oak-honey",
+        "Wood - Honey Oak Uniform Preview",
+        Category::Wood,
+        look([190, 145, 88], 0.0, 0.64, 1.5),
+        WOOD,
+        maps("starter.wood.oak-honey.maps-v1", [120.0, 240.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.oak-smoked",
+        "Wood - Smoked Oak Uniform Preview",
+        Category::Wood,
+        look([91, 72, 55], 0.0, 0.68, 1.5),
+        WOOD,
+        maps("starter.wood.oak-smoked.maps-v1", [120.0, 240.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.walnut-dark",
+        "Wood - Dark Walnut Uniform Preview",
+        Category::Wood,
+        look([99, 66, 43], 0.0, 0.60, 1.5),
+        WOOD,
+        maps("starter.wood.walnut-dark.maps-v1", [100.0, 220.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.maple-light",
+        "Wood - Light Maple Uniform Preview",
+        Category::Wood,
+        look([221, 192, 141], 0.0, 0.57, 1.5),
+        WOOD,
+        maps("starter.wood.maple-light.maps-v1", [100.0, 200.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.cherry-warm",
+        "Wood - Warm Cherry Uniform Preview",
+        Category::Wood,
+        look([164, 99, 65], 0.0, 0.58, 1.5),
+        WOOD,
+        maps("starter.wood.cherry-warm.maps-v1", [110.0, 220.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.ash-pale",
+        "Wood - Pale Ash Uniform Preview",
+        Category::Wood,
+        look([209, 186, 146], 0.0, 0.70, 1.5),
+        WOOD,
+        maps("starter.wood.ash-pale.maps-v1", [120.0, 260.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.birch-cream",
+        "Wood - Cream Birch Uniform Preview",
+        Category::Wood,
+        look([228, 206, 163], 0.0, 0.63, 1.5),
+        WOOD,
+        maps("starter.wood.birch-cream.maps-v1", [100.0, 200.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.wood.teak-golden",
+        "Wood - Golden Teak Uniform Preview",
+        Category::Wood,
+        look([167, 122, 66], 0.0, 0.61, 1.5),
+        WOOD,
+        maps("starter.wood.teak-golden.maps-v1", [110.0, 250.0], true),
+    ),
+    VisualPreset::opaque(
+        "starter.metal.carbon-steel-polished",
+        "Metal - Polished Carbon Steel",
+        Category::Metal,
+        look([161, 166, 173], 1.0, 0.16, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.stainless-soft-satin",
+        "Metal - Soft Satin Stainless",
+        Category::Metal,
+        look([187, 193, 201], 1.0, 0.36, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.aluminum-bead-blast",
+        "Metal - Bead Blast Aluminum",
+        Category::Metal,
+        look([195, 201, 210], 1.0, 0.58, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.aluminum-silver-polish",
+        "Metal - Silver Polish Aluminum",
+        Category::Metal,
+        look([218, 224, 232], 1.0, 0.13, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.copper-aged-warm",
+        "Metal - Warm Aged Copper",
+        Category::Metal,
+        look([171, 95, 57], 1.0, 0.48, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.brass-champagne",
+        "Metal - Champagne Satin Brass",
+        Category::Metal,
+        look([205, 173, 102], 1.0, 0.32, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.bronze-dark-cast",
+        "Metal - Dark Cast Bronze",
+        Category::Metal,
+        look([133, 95, 58], 1.0, 0.66, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.titanium-matte",
+        "Metal - Matte Gray Titanium",
+        Category::Metal,
+        look([147, 149, 157], 1.0, 0.53, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.gold-warm",
+        "Metal - Warm Reflective Gold",
+        Category::Metal,
+        look([235, 190, 82], 1.0, 0.18, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.metal.silver-cool",
+        "Metal - Cool Reflective Silver",
+        Category::Metal,
+        look([225, 230, 237], 1.0, 0.12, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.plastic.abs-charcoal",
+        "Plastic - Charcoal ABS",
+        Category::Plastic,
+        look([43, 45, 48], 0.0, 0.44, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.plastic.abs-warm-white",
+        "Plastic - Warm White ABS",
+        Category::Plastic,
+        look([232, 229, 220], 0.0, 0.40, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque("starter.plastic.pla-coral", "Plastic - Coral PLA", Category::Plastic, look([218, 99, 83], 0.0, 0.43, 1.5), OPAQUE, None),
+    VisualPreset::opaque(
+        "starter.plastic.petg-cyan-opaque",
+        "Plastic - Opaque Cyan PETG",
+        Category::Plastic,
+        look([36, 148, 167], 0.0, 0.29, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.plastic.nylon-ivory",
+        "Plastic - Ivory Nylon",
+        Category::Plastic,
+        look([220, 213, 190], 0.0, 0.62, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.plastic.pc-graphite-opaque",
+        "Plastic - Opaque Graphite PC",
+        Category::Plastic,
+        look([70, 76, 84], 0.0, 0.27, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.plastic.hdpe-natural-opaque",
+        "Plastic - Opaque Natural HDPE",
+        Category::Plastic,
+        look([221, 222, 207], 0.0, 0.48, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque("starter.plastic.pom-black", "Plastic - Black POM", Category::Plastic, look([29, 31, 35], 0.0, 0.32, 1.5), OPAQUE, None),
+    VisualPreset::opaque(
+        "starter.plastic.tpu-matte-black",
+        "Plastic - Matte Black TPU",
+        Category::Plastic,
+        look([31, 30, 32], 0.0, 0.83, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::opaque(
+        "starter.plastic.peek-amber-opaque",
+        "Plastic - Opaque Amber PEEK",
+        Category::Plastic,
+        look([157, 119, 62], 0.0, 0.51, 1.5),
+        OPAQUE,
+        None,
+    ),
+    VisualPreset::glass(
+        "starter.glass.clear-soda-lime",
+        "Glass Recipe - Clear Soda Lime",
+        glass([0.92, 0.98, 0.96], 1.52, 3.0, GlassBoundary::Closed),
+    ),
+    VisualPreset::glass("starter.glass.low-iron-clear", "Glass Recipe - Low Iron Clear", glass([0.98, 0.99, 1.0], 1.50, 4.0, GlassBoundary::Closed)),
+    VisualPreset::glass("starter.glass.smoky-neutral", "Glass Recipe - Smoky Neutral", glass([0.35, 0.38, 0.42], 1.52, 3.0, GlassBoundary::Closed)),
+    VisualPreset::glass("starter.glass.amber-tint", "Glass Recipe - Amber Tint", glass([0.84, 0.38, 0.08], 1.51, 3.0, GlassBoundary::Closed)),
+    VisualPreset::glass("starter.glass.cobalt-blue", "Glass Recipe - Cobalt Blue", glass([0.06, 0.14, 0.76], 1.53, 3.0, GlassBoundary::Closed)),
+    VisualPreset::glass(
+        "starter.glass.thin-clear",
+        "Glass Recipe - Thin Clear Sheet",
+        glass([0.95, 0.98, 0.99], 1.50, 2.0, GlassBoundary::Thin { thickness_mm: 2.0 }),
+    ),
+    VisualPreset::opaque(
+        "starter.solar.mono-blue",
+        "Solar Panel - Mono Blue Uniform Preview",
+        Category::Solar,
+        look([20, 41, 85], 0.0, 0.20, 1.5),
+        SOLAR,
+        maps("starter.solar.mono-blue.maps-v1", [160.0, 160.0], false),
+    ),
+    VisualPreset::opaque(
+        "starter.solar.thin-film-dark",
+        "Solar Panel - Dark Thin Film Uniform Preview",
+        Category::Solar,
+        look([28, 33, 42], 0.0, 0.28, 1.5),
+        SOLAR,
+        maps("starter.solar.thin-film-dark.maps-v1", [100.0, 200.0], false),
+    ),
+    VisualPreset::opaque(
+        "starter.regolith.mare-charcoal",
+        "Regolith - Mare Charcoal Uniform Preview",
+        Category::Regolith,
+        look([56, 56, 55], 0.0, 0.97, 1.5),
+        REGOLITH,
+        maps("starter.regolith.mare-charcoal.maps-v1", [200.0, 200.0], false),
+    ),
+    VisualPreset::opaque(
+        "starter.regolith.highland-pale",
+        "Regolith - Highland Pale Uniform Preview",
+        Category::Regolith,
+        look([116, 113, 106], 0.0, 0.93, 1.5),
+        REGOLITH,
+        maps("starter.regolith.highland-pale.maps-v1", [200.0, 200.0], false),
+    ),
+    VisualPreset::opaque(
+        "starter.regolith.dust-neutral",
+        "Regolith - Neutral Dust Uniform Preview",
+        Category::Regolith,
+        look([86, 85, 81], 0.0, 1.0, 1.5),
+        REGOLITH,
+        maps("starter.regolith.dust-neutral.maps-v1", [150.0, 150.0], false),
+    ),
+    VisualPreset::opaque(
+        "starter.regolith.agglutinate-dark",
+        "Regolith - Dark Agglutinate Uniform Preview",
+        Category::Regolith,
+        look([66, 63, 60], 0.0, 0.89, 1.5),
+        REGOLITH,
+        maps("starter.regolith.agglutinate-dark.maps-v1", [200.0, 200.0], false),
+    ),
+];

assets/icons/ui/STYLE_GUIDE.md

@@ -78,7 +78,7 @@ Its projected circle uses the same axes; do not arbitrarily flatten the ellipse.
 
 Only use the stable `source` identifiers below in model SVGs. The renderer maps roles to
 light/dark theme values. `currentColor` is the background line-art role, not a way
-to add arbitrary colours. All values and accents come from `design/palette.toml`.
+to add arbitrary colours. Default display values and semantic accents come from `design/palette.toml`. Theme files may override those display roles and ramps through `icon_palette`; source identifiers and accent assignments stay unchanged.
 
 | Role | Author helper | Light value | Use |
 | --- | --- | --- | --- |
@@ -96,9 +96,9 @@ The source hexes identify paint roles, not the displayed colour. **Never recolou
 SVG to apply a workspace accent.** Keep these identifiers and every finished shape
 unchanged; the runtime and review page resolve them through `design/palette.toml`.
 
-That file is the single colour authority: edit `light`/`dark` in the relevant
+That file is the default colour authority: edit `light`/`dark` in the relevant
 `accents` ramp; `active-3` is its primary stroke and `active-1/2` are shaded faces.
-Do not edit a role's `source` identifier. `variants` holds colour-vision adjustments.
+Do not edit a role's `source` identifier. Theme `icon_palette` overrides affect display colours only; colour-vision variants still take precedence. `variants` holds colour-vision adjustments.
 A role with `use = "active-3"` follows that stroke automatically.
 
 | Meaning | Accent | Assignment |

assets/icons/ui/design/aliases.toml

@@ -29,6 +29,7 @@ ground = "c_fix"
 
 # Same finished drawing, different semantic operation. Colours live only in palette.toml.
 sketch_break = { master = "break", accent = "sketch" }
+sketch_cancel = { master = "close", accent = "sketch" }
 sketch_dxf = { master = "dxf", accent = "sketch" }
 sketch_move = { master = "move", accent = "sketch" }
 sketch_scale = { master = "scale", accent = "sketch" }

assets/icons/ui/design/requested_icons.txt

@@ -104,6 +104,7 @@ flange	false
 flat	false
 fold	false
 folder	false
+frame_member	false
 gear	false
 graph	false
 ground	false
@@ -211,6 +212,7 @@ shield	false
 silhouette	false
 sketch	false
 sketch_break	false
+sketch_cancel	false
 sketch_chamfer	false
 sketch_chamfer_angle	false
 sketch_chamfer_equal	false

assets/icons/ui/design/svg/model/frame_member.svg

@@ -0,0 +1,22 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 64 64">
+  <title>Frame Member</title>
+  <path d="M9.25 18.86L17.63 23.7" fill="none" stroke="#ffffff" stroke-width="4.4" stroke-linejoin="round" stroke-linecap="round"/>
+  <path d="M9.25 18.86L17.63 23.7" fill="none" stroke="#236ead" stroke-width="2.2" stroke-linejoin="round" stroke-linecap="round"/>
+  <circle cx="9.25" cy="18.86" r="3" fill="#236ead"/>
+  <path d="M11.88 20.39L40.62 36.98L40.62 50.25L11.88 33.66Z" fill="#328bd3"/>
+  <path d="M23.38 13.75L52.12 30.34L40.62 36.98L11.88 20.39Z" fill="#b9ddf8"/>
+  <path d="M52.12 30.34L40.62 36.98L40.62 50.25L52.12 43.61ZM49.8 34.35L42.94 38.31L42.94 46.24L49.8 42.28Z" fill="#8e9faf" fill-rule="evenodd"/>
+  <defs><clipPath id="fm_hole"><path d="M49.8 34.35L42.94 38.31L42.94 46.24L49.8 42.28Z" fill="none"/></clipPath></defs>
+  <g clip-path="url(#fm_hole)">
+  <path d="M49.8 34.35L42.94 38.31L42.94 46.24L49.8 42.28Z" fill="#236ead"/>
+  <path d="M49.8 34.35L49.8 42.28L42.86 38.27L42.86 30.34Z" fill="#328bd3"/>
+  <path d="M49.8 42.28L42.94 46.24L35.99 42.23L42.86 38.27Z" fill="#b9ddf8"/>
+  </g>
+  <path d="M49.8 34.35L42.94 38.31L42.94 46.24L49.8 42.28Z" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linejoin="round" stroke-linecap="round"/>
+  <path d="M23.38 13.75L52.12 30.34L52.12 43.61L40.62 50.25L11.88 33.66L11.88 20.39Z" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linejoin="round" stroke-linecap="round"/>
+  <path d="M11.88 20.39L40.62 36.98L52.12 30.34" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linejoin="round" stroke-linecap="round"/>
+  <path d="M40.62 36.98L40.62 50.25" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linejoin="round" stroke-linecap="round"/>
+  <path d="M41.74 37.62L54.75 45.14" fill="none" stroke="#ffffff" stroke-width="4.4" stroke-linejoin="round" stroke-linecap="round"/>
+  <path d="M41.74 37.62L54.75 45.14" fill="none" stroke="#236ead" stroke-width="2.2" stroke-linejoin="round" stroke-linecap="round"/>
+  <circle cx="54.75" cy="45.14" r="3" fill="#236ead"/>
+</svg>

assets/icons/ui/source/markers.rs

@@ -1,4 +1,4 @@
-//! Constraint, assembly snap and dimension marker artwork.
+//! Constraint, assembly snap, hole placement and dimension marker artwork.
 use crate::dialogs_assembly::SnapKind;
 use crate::theme::Tokens;
 use egui::{Color32, Pos2, Stroke, vec2};
@@ -57,6 +57,39 @@ pub(crate) fn snap(painter: &egui::Painter, c: Pos2, tip: Option<Pos2>, kind: Sn
         painter.galley(at, g, t.text);
     }
 }
+/// A place a hole can snap to, before the cursor reaches it: a small hollow mark of its kind
+/// (a square for a face's centre, a ring for a round edge's centre).
+pub(crate) fn snap_hint(painter: &egui::Painter, c: Pos2, kind: SnapKind, col: Color32) {
+    let ic = Tokens::get().icons;
+    for stroke in [Stroke::new(3.5, ic.marker_halo), Stroke::new(1.4, col)] {
+        match kind {
+            SnapKind::FaceCenter => {
+                painter.rect_stroke(egui::Rect::from_center_size(c, vec2(8.0, 8.0)), 1.0, stroke, egui::StrokeKind::Middle);
+            }
+            SnapKind::CircleCenter => {
+                painter.circle_stroke(c, 4.5, stroke);
+            }
+            SnapKind::EdgeMid | SnapKind::Vertex => {
+                let r = 5.0;
+                let diamond = vec![c + vec2(0.0, -r), c + vec2(r, 0.0), c + vec2(0.0, r), c + vec2(-r, 0.0)];
+                painter.add(egui::Shape::convex_polygon(diamond, Color32::TRANSPARENT, stroke));
+            }
+        }
+    }
+    painter.circle_filled(c, 1.3, col);
+}
+
+/// A placed hole's drag handle: a ring round the hole's centre with a cross through it, filled
+/// while it is hovered or dragged.
+pub(crate) fn hole_handle(painter: &egui::Painter, c: Pos2, col: Color32, hot: bool) {
+    let ic = Tokens::get().icons;
+    let r = 6.0;
+    painter.circle_filled(c, r + 3.5, ic.marker_halo);
+    painter.circle(c, r, if hot { col } else { col.gamma_multiply(0.35) }, Stroke::new(1.6, col));
+    let ink = Stroke::new(1.3, if hot { ic.highlight } else { col });
+    painter.line_segment([c - vec2(r + 3.0, 0.0), c + vec2(r + 3.0, 0.0)], ink);
+    painter.line_segment([c - vec2(0.0, r + 3.0), c + vec2(0.0, r + 3.0)], ink);
+}
 pub(crate) fn glyph_icon(name: &str) -> Option<&'static str> {
     Some(match name {
         "Coincident" => "c_coincident",
@@ -75,8 +108,8 @@ pub(crate) fn glyph_icon(name: &str) -> Option<&'static str> {
 }
 pub(crate) fn glyph_letter(name: &str) -> &'static str {
     match name {
-        "Horizontal" => "H",
-        "Vertical" => "V",
+        "Horizontal" => "-",
+        "Vertical" => "|",
         _ => "?",
     }
 }

assets/locales/cs.json

@@ -72,6 +72,7 @@
   "Choose…": "Vybrat…",
   "Circular": "Kruhově",
   "Circumference": "Obvod",
+  "Clockwise": "Ve směru hodinových ručiček",
   "Close draft": "Zavřít koncept",
   "Collisions": "Kolize",
   "Colour": "Barva",
@@ -322,6 +323,7 @@
   "Search commands": "Hledat příkazy",
   "Search this library": "Prohledat tuto knihovnu",
   "Section": "Řez",
+  "Section position": "Poloha průřezu",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Vybrat jiné: podržte levé tlačítko na modelu (nebo pravé tlačítko › Vybrat jiné…) a zobrazí se vše pod kurzorem; dalším kliknutím na stejné místo vyberete další prvek. Dvojklikem prostředním tlačítkem přejdete na výchozí pohled (Předvolby › Navigace).",
   "Select bodies (a face picks its body)": "Vyberte tělesa (plocha vybere své těleso)",
   "Select bodies or faces instead": "Vyberte místo toho tělesa nebo plochy",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft se zavřel dříve, než se tyto návrhy uložily. Lze otevřít jejich poslední automatické uložení.",
   "Specialise": "Specializovat",
   "Speed": "Rychlost",
+  "Square": "Čtverec",
   "Stand it up": "Postavit",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Postavit: otočení o čtvrt otáčky kolem osy X jako jeden prvek Posunutí, který lze vrátit.",
   "Stand this part up?": "Postavit tento díl?",
+  "Start angle": "Počáteční úhel",
   "Start bulge": "Vypouklost začátku",
   "Start continuity": "Návaznost začátku",
   "Step": "Krok",
@@ -412,6 +416,7 @@
   "angle, height": "úhel, výška",
   "appearance.dielectric_ior": "Index lomu dielektrika",
   "appearance.metallic": "Kovovost",
+  "appearance.only_available": "Pouze dostupné vzhledy",
   "appearance.pbr_help": "Tento povrch zobrazíte v renderu nebo v produktovém PNG. Bez lomu a průchodu světla.",
   "appearance.pbr_opaque": "Neprůhledné PBR",
   "appearance.roughness": "Drsnost",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Vložit STEP",
   "cmd.file_save_mesh": "Uložit jako síť",
   "cmd.file_slicers": "Nainstalované slicery",
+  "cmd.frame_member": "Prvek rámu",
+  "cmd.frame_profile_insert": "Vložit profil",
+  "cmd.frame_profile_list": "Knihovna profilů",
+  "cmd.frame_profile_properties": "Vlastnosti profilu",
   "cmd.inspect_accessibility": "Analýza přístupnosti",
   "cmd.inspect_center_of_mass": "Těžiště",
   "cmd.inspect_clearance": "Vůle",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Nový fyzický materiál",
   "cmd.material_delete": "Smazat fyzický materiál",
   "cmd.material_edit": "Upravit fyzický materiál",
+  "cmd.material_inspect": "Zkontrolovat fyzický materiál",
   "cmd.material_list": "Seznam materiálů",
   "cmd.material_properties_directional": "Směrový modul pružnosti",
   "cmd.material_properties_validate": "Ověřit data fyzického materiálu",
@@ -615,6 +625,8 @@
   "cmd.plastic_rules": "Seznam pravidel pro plasty",
   "cmd.plastic_snap_fit": "Zacvakávací spoj",
   "cmd.render_backends": "Renderovací jádra",
+  "cmd.render_camera_fit": "Zarámovat objekt renderu",
+  "cmd.render_camera_get": "Prohlédnout kameru renderu",
   "cmd.render_cancel": "Zrušit render",
   "cmd.render_export": "Exportovat obrázek renderu",
   "cmd.render_preflight": "Zkontrolovat požadavek na render",
@@ -622,6 +634,7 @@
   "cmd.render_settings_apply": "Použít kameru renderu",
   "cmd.render_settings_get": "Nastavení renderu",
   "cmd.render_settings_set": "Uložit nastavení renderu",
+  "cmd.render_stage_backdrop": "Uložit fyzické pozadí renderu",
   "cmd.render_start": "Renderovat obrázek",
   "cmd.render_status": "Průběh renderu",
   "cmd.select_clear": "Zrušit výběr",
@@ -997,20 +1010,51 @@
   "recovery.min_ago": "před {count} min",
   "recovery.never_saved": "nikdy neuloženo",
   "render.background": "Pozadí scény",
+  "render.bloom_enable": "Záře ve výstupu",
+  "render.bloom_help": "Kreativní záře z lineárních jasů se třemi normalizovanými průchody. Poloměr v pixelech výstupu, přičtení před sRGB. Nejde o simulaci čočky, objemu ani zlepšení konvergence. Surové EXR se nemění.",
+  "render.bloom_opaque": "Záře vyžaduje neprůhledný výstup. Průhledné PNG se odmítne, neprovede se skryté sloučení.",
+  "render.bloom_radius": "Poloměr záře",
+  "render.bloom_strength": "Síla záře",
+  "render.bloom_threshold": "Lineární práh jasů",
+  "render.cpu_aa_help": "Prostorové vzorky: více vzorků zlepší hrany a prodlouží vykreslení.",
+  "render.cpu_key_rim": "Hlavní a obrysové",
+  "render.cpu_lighting": "Předvolba osvětlení",
+  "render.cpu_neutral": "Neutrální",
+  "render.cpu_opaque_required": "CPU trasování vyžaduje neprůhledné pozadí. Vypněte průhledné pozadí.",
+  "render.cpu_options_pending": "Panel podporuje vzorky hran, předvolby světel, stíny a expozici. Další volby jsou v API.",
+  "render.cpu_primary_samples": "Vzorky hran na pixel",
+  "render.cpu_shadows": "Vrhat stíny",
+  "render.cpu_summary": "Neprůhledný CPU PNG · světla · stíny · bez skla a textur",
+  "render.cpu_warm_cool": "Teplé a studené",
+  "render.exr_pending": "GPU může uchovat surové lineární EXR. Komprese, vícevrstvé obrazy a pomocné průchody zatím nejsou dostupné.",
   "render.fit": "Přizpůsobit produktu",
+  "render.gpu_depth": "Maximální hloubka cesty",
+  "render.gpu_options_help": "Tyto volby platí pro tuto úlohu. Expozice vychází z uloženého nastavení.",
+  "render.gpu_path_failed": "Trasování cest GPU není dostupné",
+  "render.gpu_path_first_setup": "První příprava na této GPU může trvat několik minut; SolidCraft lze mezitím používat. Při dalších spuštěních se použijí zkompilované shadery, pokud je ovladač uchová.",
+  "render.gpu_path_preparing": "Trasování cest GPU: kompilace shaderů…",
+  "render.gpu_seed": "Náhodné semeno",
+  "render.gpu_unavailable": "Trasování cest GPU není na tomto zařízení připraveno.",
+  "render.image_advanced": "Pokročilé nastavení GPU",
   "render.image_cancelled": "Render zrušen",
   "render.image_cancelling": "Rušení",
   "render.image_completed": "Obrázek připraven k exportu",
   "render.image_encoding": "Kódování PNG",
-  "render.image_export": "Exportovat PNG",
+  "render.image_export": "Exportovat hotový obrázek",
+  "render.image_exposure": "Expozice",
   "render.image_failed": "Render selhal",
   "render.image_height": "Výška",
   "render.image_help": "Náhledový obrázek z CPU · PNG · přibližná průhlednost",
+  "render.image_host_missing": "Není dostupný vykreslovací hostitel.",
+  "render.image_method": "Metoda obrazu",
   "render.image_overwrite": "Nahradit existující soubor",
   "render.image_preparing": "Příprava obrázku",
+  "render.image_progressive": "Progresivní render",
   "render.image_queued": "Čeká na render",
   "render.image_reduce": "Zkuste menší obrázek nebo jednodušší scénu.",
   "render.image_running": "Renderování obrázku",
+  "render.image_samples": "Vzorků na pixel",
+  "render.image_scene_stale": "Před kontrolou nebo spuštěním dokončete modelování nebo obnovte scénu.",
   "render.image_stale": "Tento obrázek používá scénu zachycenou před pozdějšími změnami.",
   "render.image_start": "Spustit render",
   "render.image_supported": "Požadavek na render je podporován; fronta a paměť se znovu ověří při spuštění.",
@@ -1020,17 +1064,135 @@
   "render.image_unknown": "Stav renderu není k dispozici",
   "render.image_use_largest": "Použít největší velikost v tomto poměru stran:",
   "render.image_width": "Šířka",
+  "render.material_absorption": "Absorpce R · G · B (na mm)",
+  "render.material_add": "Přidat nebo upravit těleso",
+  "render.material_assignments": "Přiřazení těles",
+  "render.material_binding_enable": "Zahrnout úpravy tohoto tělesa",
+  "render.material_box": "Osově zarovnaný kvádr",
+  "render.material_browse": "Vybrat obrázek…",
+  "render.material_certification": "Uzavřené sklo používá geometrickou vzdálenost. GPU příprava ověřuje topologii, orientaci, překryvy a optická rozhraní; kontrola jen přijímá požadavek.",
+  "render.material_choose_body": "Vybrat těleso scény",
+  "render.material_closed": "Uzavřená objemová síť",
+  "render.material_coat": "Čirý povlak na základním materiálu",
+  "render.material_coat_enable": "Zapnout čirý povlak",
+  "render.material_coat_help": "Ilustrativní dielektrický povlak na stávajícím neprůhledném vzhledu. Nulová váha ponechá základ beze změny.",
+  "render.material_color_map": "Obraz základní barvy (sRGB)",
+  "render.material_custom": "Vlastní ilustrativní optika",
+  "render.material_enable": "Použít tyto úpravy materiálů GPU",
+  "render.material_filter": "Filtrovat tělesa scény…",
+  "render.material_filter_help": "Zobrazuje se nejvýše 128 shod. U velkých scén zpřesněte filtr.",
+  "render.material_glass": "Sklo a optická absorpce",
+  "render.material_glass_enable": "Použít fyzikální sklo na těleso",
+  "render.material_glass_exclusive": "Tento renderer nepodporuje sklo s povlakem nebo mapami na témže tělese.",
+  "render.material_glass_help": "Původní ilustrativní recepty. Vzorky ukazují propustnost, ne render. Absorpce je −ln(lineární propustnosti) / referenční vzdálenost; alfa se nemění.",
+  "render.material_gpu_required": "Aktivní úpravy vyžadují GPU tracing. Před kontrolou nebo spuštěním vyberte GPU nebo úpravy vypněte.",
+  "render.material_ior": "Index lomu (IOR)",
+  "render.material_limits": "Nejvýše 128 nastavení těles, 32 oddělených skel, 64 povlaků a 128 vazeb textur. Shodné mapy sdílejí paměť; limity zařízení a celkové paměti zůstávají aktivní.",
+  "render.material_map_invalid": "Cesty map musí být omezené místní cesty; síla normál musí být konečná mezi 0 a 1.",
+  "render.material_map_required": "Před použitím map vyberte obraz barvy nebo normál.",
+  "render.material_maps": "Rovinné mapy barvy a normál",
+  "render.material_maps_enable": "Zapnout mapy neprůhledného tělesa",
+  "render.material_maps_help": "PNG/JPEG do 1024×1024; celkem 16 MiB kódovaných dat. U a V jsou kolmé vektory opakování ve světových mm (nejvýše 128 opakování). Barva je sRGB, normály OpenGL +Y. Soubory se zachytí při kontrole/spuštění.",
+  "render.material_normal_map": "Obraz normál (OpenGL, +Y)",
+  "render.material_normal_strength": "Síla normál (0–1)",
+  "render.material_origin": "Počátek mapování X · Y · Z (mm)",
+  "render.material_refresh": "Obnovit tělesa scény",
+  "render.material_refresh_needed": "Scéna se změnila. Před přidáním cíle obnovte seznam.",
+  "render.material_remove": "Odstranit přiřazení",
+  "render.material_repeat_u": "Jedno opakování U X · Y · Z (mm)",
+  "render.material_repeat_v": "Jedno opakování V X · Y · Z (mm)",
+  "render.material_revalidate": "Znovu ověřit těleso",
+  "render.material_revalidate_needed": "Přiřazení patří ke starší revizi scény. Před renderem znovu ověřte přesnou identitu tělesa.",
+  "render.material_roughness": "Drsnost povlaku (0,045–1)",
+  "render.material_shadow": "Propouštět přímé stínové paprsky",
+  "render.material_target_missing": "Pořadí a název tělesa již nesouhlasí. Odstraňte přiřazení a znovu výslovně vyberte těleso.",
+  "render.material_thickness": "Tloušťka vrstvy (mm)",
+  "render.material_thin": "Tenká vrstva",
+  "render.material_title": "Materiály GPU obrazu",
+  "render.material_transient": "Dočasné optické úpravy pro tuto kartu. Neukládají se do návrhu, nastavení renderu ani knihovny materiálů.",
+  "render.material_weight": "Váha povlaku (0–1)",
+  "render.method_cpu": "Trasování paprsků CPU",
+  "render.method_gpu": "Trasování cest GPU",
+  "render.method_raster": "CPU rastr",
   "render.navigation_help": "Kamera se ovládá stejně jako v návrhu (Předvolby › Navigace). Uložit nastavení zaznamená aktuální kameru.",
   "render.opaque_image_summary": "Náhledové PNG · neprůhledné PBR · smíšená průhlednost",
   "render.opaque_preview_help": "Neprůhledné PBR a jednoduché barvy; smíšená průhlednost. Lom světla, HDRI a finální render zatím nejsou k dispozici.",
+  "render.output_format_status": "PNG je přesný dokončený obraz. Volitelné GPU EXR uchovává lineární FLOAT32 radianci před filtry. Export nikdy nenahrazuje výsledek náhledem nebo jinou úlohou.",
   "render.perspective": "Perspektivní kamera",
   "render.preview": "Integrovaný náhled",
   "render.preview_help": "Rastrové stínování a smíšená průhlednost. Lom světla, HDRI a finální render zatím nejsou k dispozici.",
+  "render.progressive_image_summary": "Náhledové PNG · neprůhledné PBR · postupné vzorkování",
   "render.reload_settings": "Znovu načíst uložené nastavení",
   "render.restore_camera": "Obnovit uloženou kameru",
+  "render.result_actual_help": "Jeden pixel obrázku na jeden pixel obrazovky.",
+  "render.result_capture": "Zachycená revize",
+  "render.result_current": "Zachycená revize modelu je aktuální.",
+  "render.result_empty": "Zatím není hotový obrázek. Zkontrolujte nastavení a spusťte vykreslování.",
+  "render.result_fit": "Přizpůsobit obrázek",
+  "render.result_job": "Úloha",
+  "render.result_navigation": "Posun a přiblížení používají nastavení navigace. Mezerník + tažení posouvá.",
+  "render.result_open": "Otevřít hotový obrázek na hlavním plátně.",
+  "render.result_preview": "Živý náhled",
+  "render.result_retained": "Zobrazuje se poslední hotový obrázek; novější vykreslení jej zatím nenahradilo.",
+  "render.result_title": "Výsledek vykreslení",
   "render.return_design": "Zpět k návrhu",
+  "render.ribbon_backgrounds": "Pozadí",
+  "render.ribbon_check": "Kontrola",
+  "render.ribbon_check_help": "Ověřit přesný aktuální návrh renderu. Bez skrytého přepnutí vykreslovače, zmenšení nebo nahrazení zdrojů.",
+  "render.ribbon_edit_lights": "Upravit světla",
+  "render.ribbon_environment_help": "HDR osvětlení, pozadí kamery a fyzické plochy jsou samostatné ovládací prvky s potvrzením nahrazení.",
+  "render.ribbon_finish_dialog": "Nejprve dokončete dialog souboru nebo potvrzení.",
+  "render.ribbon_frame": "Zarámovat",
+  "render.ribbon_hdr_library": "Knihovna HDR",
+  "render.ribbon_job_active": "Render již běží; před spuštěním dalšího jej výslovně zrušte.",
+  "render.ribbon_light_rigs": "Sestavy světel",
+  "render.ribbon_lights_help": "Zkontrolovat světelné sestavy nebo upravit podporovaná světla; aktuální nastavení nahradí až výslovné použití.",
+  "render.ribbon_materials": "Materiály",
+  "render.ribbon_materials_help": "Otevřít inspektor vzhledu a původní povrchy. Optické úpravy nemění skrytě technické vlastnosti.",
+  "render.ribbon_no_active_job": "Není aktivní render ke zrušení.",
+  "render.ribbon_no_result": "Před exportem dokončete render.",
+  "render.ribbon_no_saved_camera": "Před obnovením kamery uložte záběr.",
+  "render.ribbon_saved_camera": "Uložená kamera",
+  "render.ribbon_shots": "Záběry",
+  "render.ribbon_studios": "Studia",
+  "render.ribbon_studios_help": "Procházejte dostupná studia a před použitím zkontrolujte nahrazované prvky. Koncepty zůstávají označené.",
+  "render.ribbon_surface_maps": "Mapy povrchu",
   "render.save_setup": "Uložit nastavení",
   "render.setup_name": "Název nastavení",
+  "render.studio_add_area": "Přidat plošné světlo",
+  "render.studio_ambient": "Konstantní zář prostředí",
+  "render.studio_aperture": "Poloměr clony",
+  "render.studio_area": "Plošné světlo",
+  "render.studio_area_help": "Nejvýše čtyři jednostranné obdélníky. Kolmé poloviční hrany U a V určují velikost; U × V míří na osvětlenou stranu. Souřadnice jsou světové milimetry.",
+  "render.studio_center": "Střed X, Y, Z (mm)",
+  "render.studio_denoise": "Potlačit šum v hotovém obrazu",
+  "render.studio_denoise_help": "Závěrečný filtr respektuje hrany; může změkčit detaily. Sklo a ostré zrcadlové povrchy se nefiltrují.",
+  "render.studio_direction": "Směr ke slunci (X, Y, Z)",
+  "render.studio_environment": "Prostředí",
+  "render.studio_environment_bounds": "Intenzita prostředí musí být 0–100 a otočení −360° až 360°.",
+  "render.studio_environment_none": "Bez mapy prostředí",
+  "render.studio_focus": "Osová zaostřovací vzdálenost",
+  "render.studio_half_u": "Poloviční hrana U (mm)",
+  "render.studio_half_v": "Poloviční hrana V (mm)",
+  "render.studio_hdr": "Soubor Radiance HDR",
+  "render.studio_hdr_browse": "Vybrat HDR…",
+  "render.studio_hdr_help": "Radiance .hdr, panorama 2:1, nejvýše 2048 × 1024. EXR není dostupné. Předpoklad barev platí jen při neurčených primárních barvách.",
+  "render.studio_hdr_required": "Vyberte místní soubor .hdr.",
+  "render.studio_hdr_srgb": "Neurčené primární barvy chápat jako lineární sRGB",
+  "render.studio_intensity": "Intenzita prostředí",
+  "render.studio_lens": "Hloubka ostrosti",
+  "render.studio_lens_perspective": "Hloubka ostrosti vyžaduje perspektivní kameru.",
+  "render.studio_lighting": "Studiové osvětlení",
+  "render.studio_lighting_enable": "Použít vlastní studiové osvětlení",
+  "render.studio_radiance": "Lineární RGB zář",
+  "render.studio_remove_area": "Odebrat plošné světlo",
+  "render.studio_rotation": "Otočení prostředí",
+  "render.studio_runtime_help": "Optické úpravy těles jsou v Materiálech GPU obrazu. Ovládání studia a materiálů je dočasné a nemění uložené vzhledy.",
+  "render.studio_sky": "Umělecká obloha",
+  "render.studio_sky_help": "Původní přechod oblohy pro osvětlení; nejde o kalibrovaný model atmosféry.",
+  "render.studio_sun": "Slunce",
+  "render.studio_sun_radius": "Úhlový poloměr",
+  "render.studio_tone_map": "Mapování tónů",
   "render.unavailable_preview": "Toto nastavení vyžaduje nedostupný profil náhledu.",
   "render.unsaved": "Neuložené změny náhledu",
   "render.use_preview": "Použít integrovaný náhled",
@@ -1116,12 +1278,115 @@
   "toolbar.customize_note": "Karta {tab}. Zaškrtnutím příkazu přidáte jeho tlačítko na panel nástrojů. Můžete také přetáhnout řádek z rozbalovací nabídky panelu na panel nástrojů, odstranit tlačítko přetažením mimo panel nástrojů nebo použít připínáček na řádku rozbalovací nabídky.",
   "toolbar.image": "OBRÁZEK",
   "toolbar.render": "RENDER",
+  "toolbar.render_appearance": "VZHLED",
+  "toolbar.render_camera": "KAMERA",
+  "toolbar.render_environment": "PROSTŘEDÍ",
+  "toolbar.render_lighting": "OSVĚTLENÍ",
   "toolbar.render_scene": "SCÉNA",
   "trace.points": "Bodů podél cesty: {count}",
   "trace.stopped_by_contact": "Končí ve vzorku {sample}: {a} by prošlo skrz {b}",
   "trace.stopped_by_loop": "Končí ve vzorku {sample}: smyčku přes {joint} už nelze dále uzavřít",
   "ui.1_degree_of_freedom": "1 stupeň volnosti",
+  "ui.3d_mouse_axes_reassigned": "Osy jsou v Předvolbách přeřazené a to platí i po této kalibraci.",
+  "ui.3d_mouse_button": "Tlačítko {number}",
+  "ui.3d_mouse_button_nothing": "Nic",
+  "ui.3d_mouse_button_settings": "Nastavení 3D myši",
+  "ui.3d_mouse_buttons": "Tlačítka",
+  "ui.3d_mouse_buttons_hint": "Stiskněte tlačítko na 3D myši, ať ho tu najdete, a vyberte, co má dělat.",
+  "ui.3d_mouse_buttons_no_device": "Připojte 3D myš a nastavte, co dělají její tlačítka.",
+  "ui.3d_mouse_buttons_reset": "Obnovit výchozí tlačítka",
+  "ui.3d_mouse_calibrate": "Kalibrovat…",
+  "ui.3d_mouse_calibrate_tip": "Pohybujte hlavicí podle pokynů v okně, aby se SolidCraft naučil, kterým směrem a jak daleko se pohybuje každá osa této 3D myši. Uloží se pro tuto 3D myš.",
+  "ui.3d_mouse_calibrate_title": "Kalibrace 3D myši",
+  "ui.3d_mouse_calibrate_wait": "Jednou pohněte 3D myší, aby ji SolidCraft uviděl.",
+  "ui.3d_mouse_calibrated": "Zkalibrováno",
+  "ui.3d_mouse_calibration": "Kalibrace 3D myši",
+  "ui.3d_mouse_calibration_done": "Hotovo. Uložte ji a použije se vždy, když bude tato 3D myš připojená.",
+  "ui.3d_mouse_calibration_no_response": "Jedna osa se skoro nepohnula, takže ji nelze zkalibrovat. Začněte znovu a pokaždé hlavicí pohněte dál.",
+  "ui.3d_mouse_circles_help": "Kruhy ukazují, co zařízení posílá po kalibraci. Zkušební model ukazuje, co s tím udělá pohled po obrácení, rychlosti a přiřazení os.",
+  "ui.3d_mouse_dead_zone": "Mrtvá zóna",
+  "ui.3d_mouse_dead_zone_tip": "Jak daleko se musí hlavice pohnout, než se pohne pohled, jako podíl jejího plného rozsahu. Zvyšte ji, pokud pohled ujíždí, i když je hlavice v klidu.",
+  "ui.3d_mouse_denied": "SolidCraft vidí 3D myš, ale nesmí ji číst. Pravidlo udev najdete v poznámkách k nastavení 3D myši.",
+  "ui.3d_mouse_denied_short": "Nalezeno, ale nelze číst",
+  "ui.3d_mouse_driven_by": "Který kalibrovaný pohyb zařízení ovládá tuto osu. Když vyberete pohyb, který už používá jiná osa, obě se prohodí.",
+  "ui.3d_mouse_driven_by_label": "ovládá",
+  "ui.3d_mouse_driver": "Ovladač 3D myši",
+  "ui.3d_mouse_driver_auto": "Automaticky",
+  "ui.3d_mouse_driver_direct": "Přímo (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Zatím se čte přes spacenavd: zařízení samotné se nepodařilo otevřít.",
+  "ui.3d_mouse_driver_only_direct": "Zařízení se čte přímo; spacenavd neběží",
+  "ui.3d_mouse_driver_only_spacenavd": "Čte se přes spacenavd, jiná možnost není",
+  "ui.3d_mouse_forget": "Zapomenout kalibraci",
+  "ui.3d_mouse_ghost_left_viewport": "Vlevo ve výřezu",
+  "ui.3d_mouse_ghost_left_window": "Vlevo v okně",
+  "ui.3d_mouse_ghost_position": "Poloha",
+  "ui.3d_mouse_ghost_right_viewport": "Vpravo ve výřezu",
+  "ui.3d_mouse_hint": "Posun a otáčení pohledu současně; náčrty používají jen posun a přiblížení.",
+  "ui.3d_mouse_kind_cap": "Návrat do středu",
+  "ui.3d_mouse_kind_question": "Jaký typ 3D myši to je?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "Hodnota zůstává, dokud ji držíte, jako u zařízení typu „Návrat do středu“.",
+  "ui.3d_mouse_looks_like_trackball": "Hodnota se vrací zpět, jakmile přestanete hýbat, jako u trackballu.",
+  "ui.3d_mouse_motion_rotation_x": "Rotace X",
+  "ui.3d_mouse_motion_rotation_y": "Rotace Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotace Z",
+  "ui.3d_mouse_motion_translation_x": "Posun X",
+  "ui.3d_mouse_motion_translation_y": "Posun Y",
+  "ui.3d_mouse_motion_translation_z": "Posun Z",
+  "ui.3d_mouse_navigate": "Navigace pomocí 3D myši",
+  "ui.3d_mouse_none": "3D myš nenalezena",
+  "ui.3d_mouse_not_calibrated": "Nezkalibrováno",
+  "ui.3d_mouse_offer": "Kalibrace 3D myši opraví prohozené nebo obrácené osy a nastaví její rychlost a pocit z ovládání.",
+  "ui.3d_mouse_offer_never": "Už nezobrazovat",
+  "ui.3d_mouse_offer_swap": "Přepnout na Hidraw (přímý ovladač)",
+  "ui.3d_mouse_reading": "Hodnoty",
+  "ui.3d_mouse_reset_axes": "Obnovit přiřazení os",
+  "ui.3d_mouse_reset_view": "Obnovit pohled",
+  "ui.3d_mouse_restore": "Obnovit výchozí nastavení 3D myši",
+  "ui.3d_mouse_restore_ask": "Vrátit nastavení 3D myši na výchozí hodnoty? Kalibrace a přiřazení tlačítek zůstanou.",
+  "ui.3d_mouse_section": "3D myš",
+  "ui.3d_mouse_show_in_view": "Zobrazit 3D myš ve 3D pohledu",
+  "ui.3d_mouse_show_in_view_tip": "Obrázek vaší 3D myši v levém dolním rohu, který se hýbe s ní.",
+  "ui.3d_mouse_skip": "Moje zařízení to neumí",
+  "ui.3d_mouse_skip_tip": "Přeskočí tento pohyb v obou směrech a kalibrace ho vynechá.",
   "ui.3d_mouse_speed": "Rychlost 3D myši",
+  "ui.3d_mouse_step_lift": "Zvedněte hlavici nahoru, podržte a pusťte.",
+  "ui.3d_mouse_step_press": "Zatlačte hlavici dolů, podržte a pusťte.",
+  "ui.3d_mouse_step_pull": "Přitáhněte hlavici k sobě, podržte a pusťte.",
+  "ui.3d_mouse_step_push": "Odtlačte hlavici od sebe, podržte a pusťte.",
+  "ui.3d_mouse_step_rest": "Dejte ruku z hlavice a nechte ji v klidu.",
+  "ui.3d_mouse_step_rest_trackball": "Dejte ruku z kuličky a nechte ji v klidu.",
+  "ui.3d_mouse_step_ring_clockwise": "Otočte rolovacím kroužkem o pár cvaknutí po směru hodinových ručiček.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Otočte rolovacím kroužkem o pár cvaknutí proti směru hodinových ručiček.",
+  "ui.3d_mouse_step_roll_away": "Několikrát kutálejte kuličkou od sebe, pak ji nechte zastavit.",
+  "ui.3d_mouse_step_roll_left": "Několikrát kutálejte kuličkou doleva, pak ji nechte zastavit.",
+  "ui.3d_mouse_step_roll_right": "Několikrát kutálejte kuličkou doprava, pak ji nechte zastavit.",
+  "ui.3d_mouse_step_roll_toward": "Několikrát kutálejte kuličkou k sobě, pak ji nechte zastavit.",
+  "ui.3d_mouse_step_slide_left": "Posuňte hlavici doleva, podržte a pusťte.",
+  "ui.3d_mouse_step_slide_right": "Posuňte hlavici doprava, podržte a pusťte.",
+  "ui.3d_mouse_step_spin_clockwise": "Několikrát roztočte kuličku po směru hodinových ručiček, pak ji nechte zastavit.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Několikrát roztočte kuličku proti směru hodinových ručiček, pak ji nechte zastavit.",
+  "ui.3d_mouse_step_tilt_away": "Nakloňte vršek hlavice od sebe (okraj nejblíž vám jde nahoru), podržte a pusťte.",
+  "ui.3d_mouse_step_tilt_left": "Nakloňte hlavici doleva (levá hrana dolů), podržte a pusťte.",
+  "ui.3d_mouse_step_tilt_right": "Nakloňte hlavici doprava (pravá hrana dolů), podržte a pusťte.",
+  "ui.3d_mouse_step_tilt_toward": "Nakloňte vršek hlavice k sobě (okraj nejblíž vám jde dolů), podržte a pusťte.",
+  "ui.3d_mouse_step_touch": "Položte ruku na hlavici, ale netlačte na ni.",
+  "ui.3d_mouse_step_twist_clockwise": "Otočte hlavici po směru hodinových ručiček, podržte a pusťte.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Otočte hlavici proti směru hodinových ručiček, podržte a pusťte.",
+  "ui.3d_mouse_switch_cap": "Kalibrovat jako návrat do středu",
+  "ui.3d_mouse_switch_trackball": "Kalibrovat jako trackball",
+  "ui.3d_mouse_view_axis": "Osa pohledu",
+  "ui.3d_mouse_view_off": "Vypnuto",
+  "ui.3d_mouse_view_off_tip": "Profil ovladače 3D myši tuto osu vypíná, takže její pohyb s pohledem nehýbe. Když tu vyberete pohyb jiné osy, prohodí se s ní a s pohledem přestane hýbat.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbit vlevo / vpravo",
+  "ui.3d_mouse_view_orbit_up_down": "Orbit nahoru / dolů",
+  "ui.3d_mouse_view_pan_sideways": "Posun vlevo / vpravo",
+  "ui.3d_mouse_view_pan_up_down": "Posun nahoru / dolů",
+  "ui.3d_mouse_view_roll": "Natočení",
+  "ui.3d_mouse_view_unmapped": "Osa {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "Čeká na pohyb",
+  "ui.3d_mouse_wiggle": "Pokud máte nějakou připojenou, zahýbejte s ní.",
   "ui.3d_sketch": "3D náčrt",
   "ui.activate": "Aktivovat",
   "ui.active_component": "Aktivní komponenta",
@@ -1351,6 +1616,7 @@
   "ui.blocked": "Blokováno",
   "ui.bodies": "Tělesa",
   "ui.bodies_all_if_none": "Tělesa (všechna, pokud žádné)",
+  "ui.bottom": "Zespodu",
   "ui.box": "Kvádr",
   "ui.break": "Přerušit",
   "ui.browser_bodies_one": "{count} těleso",
@@ -1503,6 +1769,7 @@
   "ui.grid_follows_view_hint": "Boční pohledy zobrazí mřížku na svislé rovině, která je k nim přivrácená, místo na zemi",
   "ui.ground_shadow": "Stín na podložce",
   "ui.groupSelected": "Seskupit vybrané",
+  "ui.hatch": "Šrafování",
   "ui.heading_add_ins": "DOPLŇKY",
   "ui.heading_assemble": "SESTAVA",
   "ui.heading_box": "KVÁDR",
@@ -1576,6 +1843,8 @@
   "ui.hideOrigin": "Skrýt počátek",
   "ui.hidePlanes": "Skrýt roviny",
   "ui.hideProfile": "Skrýt profil",
+  "ui.hide_origin_by_default": "Ve výchozím stavu skrýt počátek",
+  "ui.hide_origin_note": "Nové návrhy začínají se skrytou složkou Počátek. Návrh si ponechá vlastní nastavení počátku, jakmile ho zobrazíte nebo skryjete.",
   "ui.history_back": "O krok zpět",
   "ui.history_below_browser": "Pod prohlížečem",
   "ui.history_first": "Přejít na začátek",
@@ -1793,59 +2062,6 @@
   "ui.smooth_wheel_zoom": "Plynulé přiblížení kolečkem",
   "ui.smooth_wheel_zoom_tip": "Vypnutím se každý pohyb kolečka projeví okamžitě, bez dobíhání",
   "ui.snap": "Přichytávání",
-  "ui.space_mouse_axes_reassigned": "Osy jsou v Předvolbách přeřazené a to platí i po této kalibraci.",
-  "ui.space_mouse_calibrate": "Kalibrovat…",
-  "ui.space_mouse_calibrate_tip": "Pohybujte hlavicí podle pokynů v okně, aby se SolidCraft naučil, kterým směrem a jak daleko se pohybuje každá osa této 3D myši. Uloží se pro tuto 3D myš.",
-  "ui.space_mouse_calibrate_title": "Kalibrace 3D myši",
-  "ui.space_mouse_calibrated": "Zkalibrováno",
-  "ui.space_mouse_calibration": "Kalibrace 3D myši",
-  "ui.space_mouse_calibration_done": "Hotovo. Uložte ji a použije se vždy, když bude tato 3D myš připojená.",
-  "ui.space_mouse_calibration_no_response": "Jedna osa se skoro nepohnula, takže ji nelze zkalibrovat. Začněte znovu a pokaždé hlavicí pohněte dál.",
-  "ui.space_mouse_dead_zone": "Mrtvá zóna",
-  "ui.space_mouse_dead_zone_tip": "Jak daleko se musí hlavice pohnout, než se pohne pohled, jako podíl jejího plného rozsahu. Zvyšte ji, pokud pohled ujíždí, i když je hlavice v klidu.",
-  "ui.space_mouse_driven_by": "Který kalibrovaný pohyb zařízení ovládá tuto osu. Když vyberete pohyb, který už používá jiná osa, obě se prohodí.",
-  "ui.space_mouse_driven_by_label": "ovládá",
-  "ui.space_mouse_driver": "Ovladač 3D myši",
-  "ui.space_mouse_driver_auto": "Automaticky",
-  "ui.space_mouse_driver_direct": "Přímo (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Zařízení se čte přímo; spacenavd neběží",
-  "ui.space_mouse_driver_only_spacenavd": "Čte se přes spacenavd, jiná možnost není",
-  "ui.space_mouse_forget": "Zapomenout kalibraci",
-  "ui.space_mouse_hint": "Posun a otáčení pohledu současně; náčrty používají jen posun a přiblížení.",
-  "ui.space_mouse_motion_rotation_x": "Rotace X",
-  "ui.space_mouse_motion_rotation_y": "Rotace Y",
-  "ui.space_mouse_motion_rotation_z": "Rotace Z",
-  "ui.space_mouse_motion_translation_x": "Posun X",
-  "ui.space_mouse_motion_translation_y": "Posun Y",
-  "ui.space_mouse_motion_translation_z": "Posun Z",
-  "ui.space_mouse_navigate": "Navigace pomocí SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "3D myš nenalezena",
-  "ui.space_mouse_not_calibrated": "Nezkalibrováno",
-  "ui.space_mouse_reading": "Hodnoty",
-  "ui.space_mouse_reset_axes": "Obnovit přiřazení os",
-  "ui.space_mouse_step_lift": "Zvedněte hlavici nahoru, podržte a pusťte.",
-  "ui.space_mouse_step_press": "Zatlačte hlavici dolů, podržte a pusťte.",
-  "ui.space_mouse_step_pull": "Přitáhněte hlavici k sobě, podržte a pusťte.",
-  "ui.space_mouse_step_push": "Odtlačte hlavici od sebe, podržte a pusťte.",
-  "ui.space_mouse_step_rest": "Dejte ruku z hlavice a nechte ji v klidu.",
-  "ui.space_mouse_step_slide_left": "Posuňte hlavici doleva, podržte a pusťte.",
-  "ui.space_mouse_step_slide_right": "Posuňte hlavici doprava, podržte a pusťte.",
-  "ui.space_mouse_step_tilt_back": "Nakloňte hlavici dozadu (přední hrana nahoru), podržte a pusťte.",
-  "ui.space_mouse_step_tilt_forward": "Nakloňte hlavici dopředu (přední hrana dolů), podržte a pusťte.",
-  "ui.space_mouse_step_tilt_left": "Nakloňte hlavici doleva (levá hrana dolů), podržte a pusťte.",
-  "ui.space_mouse_step_tilt_right": "Nakloňte hlavici doprava (pravá hrana dolů), podržte a pusťte.",
-  "ui.space_mouse_step_twist_clockwise": "Otočte hlavici po směru hodinových ručiček, podržte a pusťte.",
-  "ui.space_mouse_step_twist_counterclockwise": "Otočte hlavici proti směru hodinových ručiček, podržte a pusťte.",
-  "ui.space_mouse_view_axis": "Osa pohledu",
-  "ui.space_mouse_view_off": "Vypnuto",
-  "ui.space_mouse_view_off_tip": "Profil ovladače 3D myši tuto osu vypíná, takže její pohyb s pohledem nehýbe. Když tu vyberete pohyb jiné osy, prohodí se s ní a s pohledem přestane hýbat.",
-  "ui.space_mouse_view_orbit_sideways": "Orbit vlevo / vpravo",
-  "ui.space_mouse_view_orbit_up_down": "Orbit nahoru / dolů",
-  "ui.space_mouse_view_pan_sideways": "Posun vlevo / vpravo",
-  "ui.space_mouse_view_pan_up_down": "Posun nahoru / dolů",
-  "ui.space_mouse_view_roll": "Natočení",
-  "ui.space_mouse_view_unmapped": "Osa {n}",
-  "ui.space_mouse_view_zoom": "Zoom",
   "ui.spacing": "Rozteč",
   "ui.spacing_2": "Rozteč 2",
   "ui.sphere": "Koule",

assets/locales/da.json

@@ -72,6 +72,7 @@
   "Choose…": "Vælg…",
   "Circular": "Cirkulær",
   "Circumference": "Omkreds",
+  "Clockwise": "Med uret",
   "Close draft": "Luk kladde",
   "Collisions": "Kollisioner",
   "Colour": "Farve",
@@ -322,6 +323,7 @@
   "Search commands": "Søg efter kommandoer",
   "Search this library": "Søg i dette bibliotek",
   "Section": "Snit",
+  "Section position": "Profilets placering",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Vælg andet: Hold venstre museknap nede uden at flytte markøren på modellen (eller højreklik › Vælg andet…) for at vise alt under markøren. Klik igen samme sted for at vælge næste objekt. Dobbeltklik på den midterste museknap for at gå til Hjem (Indstillinger › Navigation).",
   "Select bodies (a face picks its body)": "Vælg emner (en flade vælger sit emne)",
   "Select bodies or faces instead": "Vælg emner eller flader i stedet",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft lukkede, før disse designs blev gemt. Den seneste automatiske lagring kan åbnes.",
   "Specialise": "Specialisér",
   "Speed": "Hastighed",
+  "Square": "Kvadrat",
   "Stand it up": "Stil op",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Stil op: En kvart omdrejning om X som én flyttefeature, der kan fortrydes.",
   "Stand this part up?": "Stil dette emne op?",
+  "Start angle": "Startvinkel",
   "Start bulge": "Udbuling ved starten",
   "Start continuity": "Overgang ved starten",
   "Step": "Trin",
@@ -412,6 +416,7 @@
   "angle, height": "vinkel, højde",
   "appearance.dielectric_ior": "Dielektrisk brydningsindeks",
   "appearance.metallic": "Metallisk",
+  "appearance.only_available": "Kun tilgængelige udseender",
   "appearance.pbr_help": "Se denne overflade i Rendering eller i en billedfil. Lyset brydes ikke og passerer ikke gennem overfladen.",
   "appearance.pbr_opaque": "Uigennemsigtig PBR",
   "appearance.roughness": "Ruhed",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Indsæt STEP",
   "cmd.file_save_mesh": "Gem som mesh",
   "cmd.file_slicers": "Installerede slicere",
+  "cmd.frame_member": "Rammeelement",
+  "cmd.frame_profile_insert": "Indsæt profil",
+  "cmd.frame_profile_list": "Profilbibliotek",
+  "cmd.frame_profile_properties": "Profilegenskaber",
   "cmd.inspect_accessibility": "Tilgængelighedsanalyse",
   "cmd.inspect_center_of_mass": "Massecentrum",
   "cmd.inspect_clearance": "Frigangskontrol",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Nyt fysisk materiale",
   "cmd.material_delete": "Slet fysisk materiale",
   "cmd.material_edit": "Redigér fysisk materiale",
+  "cmd.material_inspect": "Inspicér fysisk materiale",
   "cmd.material_list": "Vis materialer",
   "cmd.material_properties_directional": "Retningsafhængigt elasticitetsmodul",
   "cmd.material_properties_validate": "Validér fysiske materialedata",
@@ -1121,7 +1131,106 @@
   "trace.stopped_by_contact": "Slutter ved prøve {sample}: {a} ville gå gennem {b}",
   "trace.stopped_by_loop": "Slutter ved prøve {sample}: Løkken gennem {joint} kan ikke lukkes yderligere",
   "ui.1_degree_of_freedom": "1 frihedsgrad",
+  "ui.3d_mouse_axes_reassigned": "Akserne er omtildelt i Indstillinger, og det gælder stadig oven på denne kalibrering.",
+  "ui.3d_mouse_button": "Knap {number}",
+  "ui.3d_mouse_button_nothing": "Ingenting",
+  "ui.3d_mouse_button_settings": "Indstillinger for 3D-mus",
+  "ui.3d_mouse_buttons": "Knapper",
+  "ui.3d_mouse_buttons_hint": "Tryk på en knap på din 3D-mus for at finde den her, og vælg så, hvad den gør.",
+  "ui.3d_mouse_buttons_no_device": "Tilslut en 3D-mus for at vælge, hvad dens knapper gør.",
+  "ui.3d_mouse_buttons_reset": "Gendan standardknapper",
+  "ui.3d_mouse_calibrate": "Kalibrér…",
+  "ui.3d_mouse_calibrate_tip": "Bevæg knoppen som vist i vinduet, så SolidCraft kan registrere retningen og bevægelsesområdet for hver akse. Indstillingerne gemmes til denne 3D-mus.",
+  "ui.3d_mouse_calibrate_title": "Kalibrér 3D-mus",
+  "ui.3d_mouse_calibrate_wait": "Bevæg 3D-musen én gang, så SolidCraft kan se den.",
+  "ui.3d_mouse_calibrated": "Kalibreret",
+  "ui.3d_mouse_calibration": "Kalibrering af 3D-mus",
+  "ui.3d_mouse_calibration_done": "Færdig. Gem kalibreringen, så den bruges, hver gang denne 3D-mus tilsluttes.",
+  "ui.3d_mouse_calibration_no_response": "En af akserne bevægede sig for lidt til at kunne kalibreres. Start forfra, og bevæg knoppen længere hver gang.",
+  "ui.3d_mouse_circles_help": "Cirklerne viser, hvad enheden sender efter kalibrering. Testmodellen viser, hvad visningen gør med det efter omvending, hastighed og akseplacering.",
+  "ui.3d_mouse_dead_zone": "Dødzone",
+  "ui.3d_mouse_dead_zone_tip": "Hvor langt knoppen skal bevæges, før visningen reagerer, angivet som en andel af dens fulde bevægelse. Øg værdien, hvis visningen bevæger sig, når du ikke rører knoppen.",
+  "ui.3d_mouse_denied": "SolidCraft kan se en 3D-mus, men må ikke læse den. Se opsætningsnoterne til 3D-mus for udev-reglen.",
+  "ui.3d_mouse_denied_short": "Fundet, men kan ikke læses",
+  "ui.3d_mouse_driven_by": "Hvilken kalibreret bevægelse af enheden der styrer denne akse. Vælger du en bevægelse, som en anden akse allerede bruger, bytter de to plads.",
+  "ui.3d_mouse_driven_by_label": "styres af",
+  "ui.3d_mouse_driver": "3D-musedriver",
+  "ui.3d_mouse_driver_auto": "Automatisk",
+  "ui.3d_mouse_driver_direct": "Direkte (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Læser indtil videre gennem spacenavd: selve enheden kunne ikke åbnes.",
+  "ui.3d_mouse_driver_only_direct": "Læser enheden direkte; spacenavd kører ikke",
+  "ui.3d_mouse_driver_only_spacenavd": "Læser gennem spacenavd, den eneste mulighed",
+  "ui.3d_mouse_forget": "Slet kalibrering",
+  "ui.3d_mouse_ghost_left_viewport": "Venstre visningsområde",
+  "ui.3d_mouse_ghost_left_window": "Venstre vindue",
+  "ui.3d_mouse_ghost_position": "Placering",
+  "ui.3d_mouse_ghost_right_viewport": "Højre visningsområde",
+  "ui.3d_mouse_hint": "Flyt og rotér visningen samtidigt; skitser bruger kun panorering og zoom.",
+  "ui.3d_mouse_kind_cap": "Vend tilbage til midten",
+  "ui.3d_mouse_kind_question": "Hvilken slags 3D-mus er det?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "Værdien bliver, mens du holder, som på en enhed af typen „Vend tilbage til midten“.",
+  "ui.3d_mouse_looks_like_trackball": "Værdien falder tilbage, så snart du stopper, som på en trackball.",
+  "ui.3d_mouse_motion_rotation_x": "Rotation X",
+  "ui.3d_mouse_motion_rotation_y": "Rotation Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotation Z",
+  "ui.3d_mouse_motion_translation_x": "Forskydning X",
+  "ui.3d_mouse_motion_translation_y": "Forskydning Y",
+  "ui.3d_mouse_motion_translation_z": "Forskydning Z",
+  "ui.3d_mouse_navigate": "Navigér med 3D-musen",
+  "ui.3d_mouse_none": "Ingen 3D-mus fundet",
+  "ui.3d_mouse_not_calibrated": "Ikke kalibreret",
+  "ui.3d_mouse_offer": "Kalibrering af din 3D-mus retter ombyttede eller vendte akser og indstiller dens hastighed og fornemmelse.",
+  "ui.3d_mouse_offer_never": "Vis ikke igen",
+  "ui.3d_mouse_offer_swap": "Skift til Hidraw (direkte driver)",
+  "ui.3d_mouse_reading": "Aflæser",
+  "ui.3d_mouse_reset_axes": "Nulstil aksetildeling",
+  "ui.3d_mouse_reset_view": "Nulstil visning",
+  "ui.3d_mouse_restore": "Gendan 3D-musens standardværdier",
+  "ui.3d_mouse_restore_ask": "Sæt 3D-musens indstillinger tilbage til standard? Din kalibrering og knaptildeling bliver.",
+  "ui.3d_mouse_section": "3D-mus",
+  "ui.3d_mouse_show_in_view": "Vis 3D-musen i 3D-visningen",
+  "ui.3d_mouse_show_in_view_tip": "Et billede af din 3D-mus i nederste venstre hjørne, der bevæger sig, når du bevæger den.",
+  "ui.3d_mouse_skip": "Min enhed kan ikke det",
+  "ui.3d_mouse_skip_tip": "Springer bevægelsen over begge veje, og kalibreringen udelader den.",
   "ui.3d_mouse_speed": "3D-musens hastighed",
+  "ui.3d_mouse_step_lift": "Løft knoppen op, hold den, og slip.",
+  "ui.3d_mouse_step_press": "Tryk knoppen ned, hold den, og slip.",
+  "ui.3d_mouse_step_pull": "Træk knoppen mod dig, hold den, og slip.",
+  "ui.3d_mouse_step_push": "Skub knoppen væk fra dig, hold den, og slip.",
+  "ui.3d_mouse_step_rest": "Fjern hånden fra knoppen, og lad den stå stille.",
+  "ui.3d_mouse_step_rest_trackball": "Fjern hånden fra kuglen, og lad den ligge stille.",
+  "ui.3d_mouse_step_ring_clockwise": "Drej rullehjulet et par klik med uret.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Drej rullehjulet et par klik mod uret.",
+  "ui.3d_mouse_step_roll_away": "Rul kuglen væk fra dig et par gange, og lad den stoppe.",
+  "ui.3d_mouse_step_roll_left": "Rul kuglen mod venstre et par gange, og lad den stoppe.",
+  "ui.3d_mouse_step_roll_right": "Rul kuglen mod højre et par gange, og lad den stoppe.",
+  "ui.3d_mouse_step_roll_toward": "Rul kuglen ind mod dig et par gange, og lad den stoppe.",
+  "ui.3d_mouse_step_slide_left": "Skub knoppen mod venstre, hold den, og slip.",
+  "ui.3d_mouse_step_slide_right": "Skub knoppen mod højre, hold den, og slip.",
+  "ui.3d_mouse_step_spin_clockwise": "Drej kuglen rundt med uret et par gange, og lad den stoppe.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Drej kuglen rundt mod uret et par gange, og lad den stoppe.",
+  "ui.3d_mouse_step_tilt_away": "Vip toppen af knoppen væk fra dig (kanten nærmest dig går op), hold den, og slip.",
+  "ui.3d_mouse_step_tilt_left": "Vip knoppen mod venstre (venstre kant ned), hold den, og slip.",
+  "ui.3d_mouse_step_tilt_right": "Vip knoppen mod højre (højre kant ned), hold den, og slip.",
+  "ui.3d_mouse_step_tilt_toward": "Vip toppen af knoppen ind mod dig (kanten nærmest dig går ned), hold den, og slip.",
+  "ui.3d_mouse_step_touch": "Hvil hånden på knoppen uden at skubbe til den.",
+  "ui.3d_mouse_step_twist_clockwise": "Drej knoppen med uret, hold den, og slip.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Drej knoppen mod uret, hold den, og slip.",
+  "ui.3d_mouse_switch_cap": "Kalibrer som vend tilbage til midten",
+  "ui.3d_mouse_switch_trackball": "Kalibrér som trackball",
+  "ui.3d_mouse_view_axis": "Visningsakse",
+  "ui.3d_mouse_view_off": "Fra",
+  "ui.3d_mouse_view_off_tip": "3D-musedriverens profil slår denne akse fra, så dens bevægelse flytter ikke visningen. Vælger du en anden akses bevægelse her, bytter de to plads, og den bevægelse flytter ikke længere visningen.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbit venstre / højre",
+  "ui.3d_mouse_view_orbit_up_down": "Orbit op / ned",
+  "ui.3d_mouse_view_pan_sideways": "Panorér venstre / højre",
+  "ui.3d_mouse_view_pan_up_down": "Panorér op / ned",
+  "ui.3d_mouse_view_roll": "Rul",
+  "ui.3d_mouse_view_unmapped": "Akse {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "Venter på bevægelse",
+  "ui.3d_mouse_wiggle": "Hvis du har en tilsluttet, så bevæg den lidt.",
   "ui.3d_sketch": "3D-skitse",
   "ui.activate": "Aktivér",
   "ui.active_component": "Aktiv komponent",
@@ -1351,6 +1460,7 @@
   "ui.blocked": "Blokeret",
   "ui.bodies": "Emner",
   "ui.bodies_all_if_none": "Emner (alle, hvis ingen er valgt)",
+  "ui.bottom": "Nedenfra",
   "ui.box": "Boks",
   "ui.break": "Bryd",
   "ui.browser_bodies_one": "{count} emne",
@@ -1503,6 +1613,7 @@
   "ui.grid_follows_view_hint": "Sidevisninger viser gitteret på det lodrette plan, der vender mod dem, i stedet for grundplanet",
   "ui.ground_shadow": "Skygge på grundplan",
   "ui.groupSelected": "Gruppér valgte",
+  "ui.hatch": "Skravering",
   "ui.heading_add_ins": "ADD-INS",
   "ui.heading_assemble": "SAMLING",
   "ui.heading_box": "BOKS",
@@ -1793,34 +1904,6 @@
   "ui.smooth_wheel_zoom": "Jævn zoom med musehjul",
   "ui.smooth_wheel_zoom_tip": "Slå fra for at anvende hver hjulbevægelse straks uden efterfølgende udjævning",
   "ui.snap": "Fastgør til geometri",
-  "ui.space_mouse_calibrate": "Kalibrér…",
-  "ui.space_mouse_calibrate_tip": "Bevæg knoppen som vist i vinduet, så SolidCraft kan registrere retningen og bevægelsesområdet for hver akse. Indstillingerne gemmes til denne 3D-mus.",
-  "ui.space_mouse_calibrate_title": "Kalibrér 3D-mus",
-  "ui.space_mouse_calibrated": "Kalibreret",
-  "ui.space_mouse_calibration": "Kalibrering af 3D-mus",
-  "ui.space_mouse_calibration_done": "Færdig. Gem indstillingerne, så de bruges, hver gang denne 3D-mus tilsluttes.",
-  "ui.space_mouse_calibration_no_response": "En af akserne bevægede sig for lidt til at kunne kalibreres. Start forfra, og bevæg knoppen længere hver gang.",
-  "ui.space_mouse_dead_zone": "Dødzone",
-  "ui.space_mouse_dead_zone_tip": "Hvor langt knoppen skal bevæges, før visningen reagerer, angivet som en andel af dens fulde bevægelse. Øg værdien, hvis visningen bevæger sig, når du ikke rører knoppen.",
-  "ui.space_mouse_forget": "Nulstil kalibrering",
-  "ui.space_mouse_hint": "Flyt og rotér visningen samtidigt; skitser bruger kun panorering og zoom.",
-  "ui.space_mouse_navigate": "Navigér med SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Ingen 3D-mus fundet",
-  "ui.space_mouse_not_calibrated": "Ikke kalibreret",
-  "ui.space_mouse_reading": "Aflæser",
-  "ui.space_mouse_step_lift": "Løft knoppen op, hold den dér, og slip.",
-  "ui.space_mouse_step_press": "Tryk knoppen ned, hold den dér, og slip.",
-  "ui.space_mouse_step_pull": "Træk knoppen mod dig, hold den dér, og slip.",
-  "ui.space_mouse_step_push": "Skub knoppen væk fra dig, hold den dér, og slip.",
-  "ui.space_mouse_step_rest": "Fjern hånden fra knoppen, og lad den stå stille.",
-  "ui.space_mouse_step_slide_left": "Skub knoppen mod venstre, hold den dér, og slip.",
-  "ui.space_mouse_step_slide_right": "Skub knoppen mod højre, hold den dér, og slip.",
-  "ui.space_mouse_step_tilt_back": "Vip knoppen bagud (forkanten op), hold den dér, og slip.",
-  "ui.space_mouse_step_tilt_forward": "Vip knoppen fremad (forkanten ned), hold den dér, og slip.",
-  "ui.space_mouse_step_tilt_left": "Vip knoppen mod venstre (venstre kant ned), hold den dér, og slip.",
-  "ui.space_mouse_step_tilt_right": "Vip knoppen mod højre (højre kant ned), hold den dér, og slip.",
-  "ui.space_mouse_step_twist_clockwise": "Drej knoppen med uret, hold den dér, og slip.",
-  "ui.space_mouse_step_twist_counterclockwise": "Drej knoppen mod uret, hold den dér, og slip.",
   "ui.spacing": "Afstand",
   "ui.spacing_2": "Afstand 2",
   "ui.sphere": "Kugle",

assets/locales/de.json

@@ -85,6 +85,7 @@
   "Choose…": "Auswählen…",
   "Circular": "Kreisförmig",
   "Circumference": "Umfang",
+  "Clockwise": "Im Uhrzeigersinn",
   "Close draft": "Entwurf schließen",
   "Collapse": "Einklappen",
   "Collisions": "Kollisionen",
@@ -404,6 +405,7 @@
   "Search this library": "Diese Bibliothek durchsuchen",
   "Second plane": "Zweite Ebene",
   "Section": "Schnitt",
+  "Section position": "Lage des Querschnitts",
   "Sections (one sketch each)": "Querschnitte (je eine Skizze)",
   "Select Other": "Andere auswählen",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Anderes auswählen: Halten Sie die linke Taste ruhig auf dem Modell gedrückt (oder Rechtsklick › Anderes auswählen…), um alles unter dem Cursor aufzulisten; klicken Sie erneut an dieselbe Stelle, um das nächste Element dort auszuwählen. Doppelklick mit der mittleren Taste wechselt zur Startansicht (Einstellungen › Navigation).",
@@ -432,9 +434,11 @@
   "Specialise": "Spezialisieren",
   "Speed": "Geschwindigkeit",
   "Splitting tool": "Trennwerkzeug",
+  "Square": "Quadrat",
   "Stand it up": "Aufrichten",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Aufrichten: eine Vierteldrehung um X, als ein Verschieben-Merkmal, das sich rückgängig machen lässt.",
   "Stand this part up?": "Dieses Teil aufrichten?",
+  "Start angle": "Startwinkel",
   "Start bulge": "Startausbauchung",
   "Start continuity": "Startstetigkeit",
   "Step": "Schritt",
@@ -520,6 +524,7 @@
   "angle, height": "Winkel, Höhe",
   "appearance.dielectric_ior": "Brechungsindex des Dielektrikums",
   "appearance.metallic": "Metallanteil",
+  "appearance.only_available": "Nur verfügbare Erscheinungsbilder",
   "appearance.pbr_help": "Diese Oberfläche in Render oder einem Produkt-PNG ansehen. Keine Brechung oder Transmission.",
   "appearance.pbr_opaque": "Opakes PBR",
   "appearance.roughness": "Rauheit",
@@ -641,6 +646,10 @@
   "cmd.file_insert_step": "STEP einfügen",
   "cmd.file_save_mesh": "Als Netz speichern",
   "cmd.file_slicers": "Installierte Slicer",
+  "cmd.frame_member": "Rahmenelement",
+  "cmd.frame_profile_insert": "Profil einfügen",
+  "cmd.frame_profile_list": "Profilbibliothek",
+  "cmd.frame_profile_properties": "Profileigenschaften",
   "cmd.inspect_accessibility": "Zugänglichkeitsanalyse",
   "cmd.inspect_center_of_mass": "Massenschwerpunkt",
   "cmd.inspect_clearance": "Freiraum",
@@ -680,6 +689,7 @@
   "cmd.material_create": "Neues physikalisches Material",
   "cmd.material_delete": "Physisches Material löschen",
   "cmd.material_edit": "Physisches Material bearbeiten",
+  "cmd.material_inspect": "Physikalisches Material prüfen",
   "cmd.material_list": "Materialien auflisten",
   "cmd.material_properties_directional": "Richtungsabhängiger Elastizitätsmodul",
   "cmd.material_properties_validate": "Physikalische Materialdaten prüfen",
@@ -726,13 +736,32 @@
   "cmd.plastic_rules": "Kunststoffregeln auflisten",
   "cmd.plastic_snap_fit": "Rastverbindung",
   "cmd.render_backends": "Render-Backends",
+  "cmd.render_camera_fit": "Renderobjekt einpassen",
+  "cmd.render_camera_get": "Renderkamera prüfen",
   "cmd.render_cancel": "Rendering abbrechen",
   "cmd.render_export": "PNG exportieren",
+  "cmd.render_hdr_inspect": "HDR-Quelle untersuchen",
+  "cmd.render_library_appearance_apply": "Opakes Bibliotheksaussehen anwenden",
+  "cmd.render_library_describe": "Render-Ressource untersuchen",
+  "cmd.render_library_environment_apply": "Integrierte HDR-Umgebung anwenden",
+  "cmd.render_library_list": "Render-Bibliothek durchsuchen",
+  "cmd.render_library_physical_prepare": "Prepare Physical Reference",
+  "cmd.render_library_studio_apply": "Erstellte Studiolichter anwenden",
+  "cmd.render_library_studio_prepare": "Erstellte Studiolichter vorbereiten",
+  "cmd.render_library_surface_bind": "Save Surface Binding",
+  "cmd.render_library_surface_prepare": "Erstellte Oberflächenmaps vorbereiten",
+  "cmd.render_library_surface_unbind": "Remove Surface Binding",
+  "cmd.render_library_targets": "Ziele für Render-Ressourcen suchen",
   "cmd.render_preflight": "Renderanfrage prüfen",
+  "cmd.render_result_pin": "Angezeigtes Render-Ergebnis behalten",
   "cmd.render_scene": "Renderszene prüfen",
   "cmd.render_settings_apply": "Renderkamera anwenden",
+  "cmd.render_settings_capture_hdr": "Render-Einstellungen mit HDR speichern",
   "cmd.render_settings_get": "Rendereinstellungen",
   "cmd.render_settings_set": "Rendereinstellungen speichern",
+  "cmd.render_stage_backdrop": "Physischen Renderhintergrund speichern",
+  "cmd.render_stage_clear": "Remove Render Stage",
+  "cmd.render_stage_ground": "Save Render Ground",
   "cmd.render_start": "Bild rendern",
   "cmd.render_status": "Renderfortschritt",
   "cmd.select_clear": "Auswahl aufheben",
@@ -1054,6 +1083,8 @@
   "manage.material_hint": "Wählen Sie Körper und deren physikalisches Material aus.",
   "manage.parameters_hint": "Bearbeiten Sie Ausdrücke und Einheiten. Änderungen werden mit der Eingabetaste oder beim Verlassen eines Feldes übernommen.",
   "manage.rules_hint": "Wählen Sie eine Regel zum Bearbeiten oder erstellen Sie eine neue. Bestätigen Sie, um die Regel zu speichern.",
+  "material.editor.axes_numeric": "1 / 2 / 3",
+  "material.editor.axes_wood": "L / R / T",
   "measure.at": "Bei",
   "measure.item": "Element {number}",
   "messages.ago_h": "vor {n} Std.",
@@ -1117,13 +1148,35 @@
   "recovery.just_now": "gerade eben",
   "recovery.min_ago": "vor {count} Min.",
   "recovery.never_saved": "nie gespeichert",
+  "render.add_ground": "Add fitted ground to setup",
   "render.background": "Szenenhintergrund",
+  "render.bloom_enable": "Darstellungs-Bloom",
+  "render.bloom_help": "Kreativer Ausgabeglanz aus linearen Glanzlichtern mit drei normierten Durchläufen. Radius in Ausgabepixeln; Addition vor sRGB. Keine Linsen-, Volumen- oder Konvergenzsimulation. Das rohe EXR bleibt unverändert.",
+  "render.bloom_opaque": "Bloom benötigt eine deckende Ausgabe. Transparentes PNG wird abgelehnt, nicht still abgeflacht.",
+  "render.bloom_radius": "Bloom-Radius",
+  "render.bloom_strength": "Bloom-Stärke",
+  "render.bloom_threshold": "Linearer Glanzlichtschwellwert",
+  "render.camera_pitch": "Kameraneigung",
+  "render.camera_set": "Render-Kamera einstellen",
+  "render.clear_stage": "Remove saved stage",
+  "render.cpu_budget": "CPU-Ressourcenprofil",
+  "render.cpu_budget_bodies": "Körperobergrenze",
+  "render.cpu_budget_compact": "Kompakt (bisherige Grenzen)",
+  "render.cpu_budget_details": "Ressourcengrenzen",
+  "render.cpu_budget_help": "Größere Grenzen ausdrücklich wählen. Auflösung und Samples werden nie automatisch reduziert.",
+  "render.cpu_budget_memory": "Speicherobergrenze pro Auftrag",
+  "render.cpu_budget_not_guarantee": "Dies sind Zulassungsgrenzen, keine RAM-Reservierung oder Geschwindigkeitsgarantie. Geometrie, Film und Vorschauen teilen das Speicherbudget. Das Rendern bleibt abbrechbar.",
+  "render.cpu_budget_resize": "Der Entwurf überschreitet das CPU-Profil oder sein Kamera-Sample-Budget. Kleinere Abmessungen ausdrücklich bestätigen oder ein größeres Profil wählen.",
+  "render.cpu_budget_studio": "Studio (große Bilder)",
+  "render.cpu_budget_triangles": "Dreiecksobergrenze",
+  "render.cpu_budget_workstation": "Workstation (komplexe Szenen)",
+  "render.exr_pending": "Die GPU kann rohe lineare EXR-Dateien behalten. Kompression, mehrschichtige Bilder und zusätzliche Renderpässe bleiben nicht verfügbar.",
   "render.fit": "Produkt einpassen",
   "render.image_cancelled": "Rendering abgebrochen",
   "render.image_cancelling": "Wird abgebrochen",
   "render.image_completed": "Bild bereit zum Export",
   "render.image_encoding": "PNG wird kodiert",
-  "render.image_export": "PNG exportieren",
+  "render.image_export": "Fertiges Bild exportieren",
   "render.image_failed": "Rendering fehlgeschlagen",
   "render.image_height": "Höhe",
   "render.image_help": "CPU-Vorschaubild · PNG · angenäherte Transparenz",
@@ -1141,17 +1194,98 @@
   "render.image_unknown": "Renderstatus nicht verfügbar",
   "render.image_use_largest": "Größte Größe mit diesem Seitenverhältnis verwenden:",
   "render.image_width": "Breite",
+  "render.include_rig_cards": "Include passive cards and flags",
+  "render.library_applied": "Ressourcenvariante angewendet. Vollständigen Renderauftrag vor dem Start prüfen.",
+  "render.library_apply_hdr": "Mit dieser HDR-Umgebung speichern",
+  "render.library_apply_maps": "Erstellte GPU-Oberflächenmaps verwenden",
+  "render.library_apply_studio": "Erstellte Studiovariante speichern",
+  "render.library_apply_uniform": "Einheitliches opakes Aussehen anwenden",
+  "render.library_authored_help": "Original erstellte Ressourcen dienen der Darstellung, nicht als gemessene technische Daten. Jede Aktion wendet nur ihre angegebene Variante an.",
+  "render.library_blocked": "Diese Ressource benötigt noch Kalibrierung oder eine externe Sonne und kann noch nicht angewendet werden.",
+  "render.library_center": "Mittelpunkt des Lichtaufbaus",
+  "render.library_emitters_only_ack": "Nur Strahler verwenden; dokumentierte passive Karten auslassen",
+  "render.library_environment_concepts": "Umgebungskonzepte",
+  "render.library_extent": "Objektausdehnung",
+  "render.library_hdr": "Integrierte HDR-Umgebungen",
+  "render.library_hdr_help": "Bettet das originale HDR in die gespeicherte Einstellung ein. Der Längengradursprung wird ausdrücklich umgerechnet; nach dem Speichern ist keine externe Datei nötig.",
+  "render.library_light_concepts": "Beleuchtungskonzepte",
+  "render.library_maps_help": "Built-in maps can be saved with pinned sources and local occurrence mapping. Temporary optical overrides remain a separate mode.",
+  "render.library_material_concepts": "Materialkonzepte",
+  "render.library_next": "Nächste Seite",
+  "render.library_physical_profiles": "Physical reference profiles",
+  "render.library_previous": "Vorherige Seite",
+  "render.library_quality_concepts": "Qualitätsspezifikationen",
+  "render.library_replace_environment": "Vorhandene Umgebung ausdrücklich ersetzen",
+  "render.library_replace_studio": "Replace saved lighting, environment and stage",
+  "render.library_results": "Passende Ressourcen",
+  "render.library_rig_help": "Fit once at an explicit center and physical extent. Complete rigs include passive cards; calibration blockers still refuse. Conservative emitter/card clearance is checked before saving.",
+  "render.library_rigs": "Erstellte Lichtaufbauten",
+  "render.library_save_maps": "Save maps to this setup",
+  "render.library_scene_bounds": "Erfasste Szenengrenzen verwenden",
+  "render.library_scenes": "Szenenspezifikationen",
+  "render.library_search": "Bibliothek durchsuchen",
+  "render.library_selene": "SELENE: opake Oberflächen",
+  "render.library_specification_only": "Nur Spezifikation: keine vollständig ausführbare Voreinstellung. Erforderliche Effekte, Ressourcen und Objektrollen müssen noch implementiert und gebunden werden.",
+  "render.library_surfaces": "Erstellte PBR-Oberflächen",
+  "render.library_target": "Zielkörper",
+  "render.library_title": "Render-Ressourcenbibliothek",
+  "render.library_uniform_ack": "Einheitliche Näherung ohne räumliche oder erweiterte Effekte verwenden",
+  "render.material_color_replace": "Basismap ersetzt Körperfarbe",
+  "render.material_limits": "Höchstens 128 Körperüberschreibungen, 32 getrennte Glaskörper, 64 Beschichtungen und 128 Texturbindungen. Identische Maps teilen Speicher; Geräte- und Gesamtspeichergrenzen bleiben aktiv.",
+  "render.material_metallic_map": "Metallanteil-Map (linear)",
+  "render.material_roughness_map": "Rauheitsmap (linear)",
+  "render.material_v_up": "Textur-V zeigt im Bild nach oben",
   "render.navigation_help": "Die Kamera bewegt sich wie im Konstruieren (Einstellungen › Navigation). Setup speichern übernimmt die aktuelle Kamera.",
   "render.opaque_image_summary": "Vorschau-PNG · opakes PBR · Transparenz durch Blending",
   "render.opaque_preview_help": "Opakes PBR und einfache Farben; Transparenz durch Blending. Brechung, HDRI und finales Rendering sind noch nicht verfügbar.",
+  "render.output_format_status": "PNG enthält das exakte fertige Anzeigebild. Optionales GPU-EXR bewahrt rohe lineare FLOAT32-Strahldichte vor Filtern. Export ersetzt nie durch Vorschaucache oder anderen Auftrag.",
+  "render.passive_stage": "Render-only stage",
+  "render.passive_stage_help": "Finite passive panels belong only to rendered images. They do not add CAD bodies or mass. Placement is fixed after applying; intersecting product bounds refuse. CPU does not provide diffuse bounce lighting.",
   "render.perspective": "Perspektivische Kamera",
+  "render.physical_acknowledge": "I understand this partial reference needs grade, condition and source review",
+  "render.physical_associations": "Physical candidates and roles",
+  "render.physical_copy_plan": "Copy plan with sources and omissions",
+  "render.physical_material_name": "Proposed reference material name",
+  "render.physical_omissions": "Properties not representable in the native card",
+  "render.physical_plan_only": "Read-only plan prepared. No material was created or assigned. Keep its extended profile and omissions when reviewing the native card.",
+  "render.physical_prepare_plan": "Prepare creation plan (does not apply)",
+  "render.physical_separate": "Appearance is not material identification. These are sourced references, not certified effective properties. Existing mass, engineering materials and optics are unchanged.",
+  "render.physical_unknown": "No numerical candidate is established. Grade, formulation or construction must be specified; unknown is not zero.",
   "render.preview": "Integrierte Vorschau",
   "render.preview_help": "Rasterdarstellung mit gemischter Transparenz. Brechung, HDRI und finales Rendering sind noch nicht verfügbar.",
   "render.reload_settings": "Gespeicherte Einstellungen laden",
+  "render.replace_saved_surface": "Replace an existing saved binding for this target",
   "render.restore_camera": "Gespeicherte Kamera laden",
+  "render.result_reduced_display": "Anzeigevorschau auf die Geräte-/Cachegrenze reduziert. PNG und Export behalten die volle Auflösung; native 100%-Ansicht ist hier nicht verfügbar.",
   "render.return_design": "Zurück zu Design",
+  "render.ribbon_backgrounds": "Hintergründe",
+  "render.ribbon_check": "Prüfen",
+  "render.ribbon_check_help": "Genau den aktuellen Renderentwurf prüfen. Kein stiller Rendererwechsel, keine Verkleinerung oder Ersetzung.",
+  "render.ribbon_edit_lights": "Licht ändern",
+  "render.ribbon_environment_help": "HDR-Beleuchtung, Kamerahintergründe und physische Bühnen sind getrennte Einstellungen mit ausdrücklicher Ersetzungsbestätigung.",
+  "render.ribbon_finish_dialog": "Zuerst den Datei- oder Bestätigungsdialog abschließen.",
+  "render.ribbon_frame": "Einpassen",
+  "render.ribbon_hdr_library": "HDR-Bibliothek",
+  "render.ribbon_job_active": "Ein Render läuft bereits; vor einem neuen Auftrag ausdrücklich abbrechen.",
+  "render.ribbon_light_rigs": "Lichtaufbauten",
+  "render.ribbon_lights_help": "Lichtaufbauten prüfen oder unterstützte Lichter bearbeiten; erst ausdrücklich Anwenden ersetzt die Einrichtung.",
+  "render.ribbon_materials": "Materialien",
+  "render.ribbon_materials_help": "Gemeinsamen Erscheinungsinspektor und Originaloberflächen öffnen. Optik ändert keine technischen Eigenschaften stillschweigend.",
+  "render.ribbon_no_active_job": "Kein aktiver Render zum Abbrechen.",
+  "render.ribbon_no_result": "Vor dem Export muss ein Render abgeschlossen sein.",
+  "render.ribbon_no_saved_camera": "Vor dem Wiederherstellen eine Aufnahme speichern.",
+  "render.ribbon_saved_camera": "Gespeicherte Kamera",
+  "render.ribbon_shots": "Aufnahmen",
+  "render.ribbon_studios": "Studios",
+  "render.ribbon_studios_help": "Implementierte Studios durchsuchen und Ersetzungen vor dem Anwenden prüfen. Konzepte bleiben gekennzeichnet.",
+  "render.ribbon_surface_maps": "Oberflächen",
   "render.save_setup": "Setup speichern",
+  "render.saved_maps_runtime_conflict": "Saved surface bindings cannot be mixed with temporary optical overrides or an unsaved HDR. Save the HDR or remove the temporary inputs explicitly.",
+  "render.saved_surface_remove": "Remove saved binding",
+  "render.saved_surfaces": "Saved surface bindings",
+  "render.saved_surfaces_help": "Pinned built-in maps follow the selected occurrence in local millimeters. A replaced or missing target is an error, never an automatic reassignment.",
   "render.setup_name": "Name des Setups",
+  "render.stage_panel_count": "Saved panels",
   "render.unavailable_preview": "Dieses Setup verlangt ein nicht verfügbares Vorschauprofil.",
   "render.unsaved": "Ungespeicherte Vorschauänderungen",
   "render.use_preview": "Integrierte Vorschau verwenden",
@@ -1187,6 +1321,8 @@
   "settings.msaa_applies_on_restart": "Die Kantenglättung wird beim nächsten Start von SolidCraft übernommen",
   "settings.msaa_reset": "{setting}: {requested}× wird von diesem Grafikgerät nicht unterstützt; jetzt {reset}× (unterstützt: {supported}).",
   "settings.msaa_unsupported": "Von diesem Grafikgerät nicht unterstützt",
+  "settings.reference_geometry_through_bodies": "Referenzgeometrie durch Körper hindurch anzeigen",
+  "settings.reference_geometry_through_bodies_help": "Konturen inaktiver Skizzen und Bezugsebenen über schattierten Körpern zeichnen",
   "settings.reset_intro": "Diese Einstellungen funktionieren auf diesem Computer nicht und würden den Start von SolidCraft verhindern. Sie wurden daher geändert:",
   "settings.reset_title": "Einstellungen wurden geändert",
   "settings.supersampling_note": "Zeichnet die Ansicht in höherer Auflösung und rechnet sie herunter: glattere Kanten, Linien und Raster auf Bildschirmen unter 4K. Kostet GPU-Zeit: etwa 2,25-mal so viele Pixel bei 1,5× und 4-mal bei 2×.",
@@ -1237,12 +1373,115 @@
   "toolbar.customize_note": "Registerkarte {tab}. Markieren Sie einen Befehl, um ihm eine Schaltfläche in der Werkzeugleiste zu geben. Sie können auch eine Zeile aus dem Aufklappmenü eines Panels auf die Werkzeugleiste ziehen, eine Schaltfläche zum Entfernen aus der Werkzeugleiste ziehen oder die Stecknadel einer Menüzeile verwenden.",
   "toolbar.image": "BILD",
   "toolbar.render": "RENDERN",
+  "toolbar.render_appearance": "ERSCHEINUNG",
+  "toolbar.render_camera": "KAMERA",
+  "toolbar.render_environment": "UMGEBUNG",
+  "toolbar.render_lighting": "BELEUCHTUNG",
   "toolbar.render_scene": "SZENE",
   "trace.points": "{count} Punkte entlang der Bahn",
   "trace.stopped_by_contact": "Endet bei Probe {sample}: {a} würde {b} durchdringen",
   "trace.stopped_by_loop": "Endet bei Probe {sample}: die Schleife über {joint} lässt sich nicht weiter schließen",
   "ui.1_degree_of_freedom": "1 Freiheitsgrad",
+  "ui.3d_mouse_axes_reassigned": "Die Achsen sind in den Einstellungen neu zugeordnet, und das gilt auch nach dieser Kalibrierung.",
+  "ui.3d_mouse_button": "Taste {number}",
+  "ui.3d_mouse_button_nothing": "Nichts",
+  "ui.3d_mouse_button_settings": "3D-Maus-Einstellungen",
+  "ui.3d_mouse_buttons": "Tasten",
+  "ui.3d_mouse_buttons_hint": "Drücken Sie eine Taste an Ihrer 3D-Maus, um sie hier zu finden, und wählen Sie dann, was sie tut.",
+  "ui.3d_mouse_buttons_no_device": "Schließen Sie eine 3D-Maus an, um ihre Tasten zu belegen.",
+  "ui.3d_mouse_buttons_reset": "Standardbelegung wiederherstellen",
+  "ui.3d_mouse_calibrate": "Kalibrieren…",
+  "ui.3d_mouse_calibrate_tip": "Bewegen Sie die Kappe so, wie das Fenster es verlangt. So lernt SolidCraft, in welche Richtung und wie weit jede Achse dieser 3D-Maus geht. Wird für diese 3D-Maus gespeichert.",
+  "ui.3d_mouse_calibrate_title": "3D-Maus kalibrieren",
+  "ui.3d_mouse_calibrate_wait": "Bewegen Sie die 3D-Maus einmal, damit SolidCraft sie erkennt.",
+  "ui.3d_mouse_calibrated": "Kalibriert",
+  "ui.3d_mouse_calibration": "3D-Maus-Kalibrierung",
+  "ui.3d_mouse_calibration_done": "Fertig. Speichern Sie die Kalibrierung, damit sie immer gilt, wenn diese 3D-Maus angeschlossen ist.",
+  "ui.3d_mouse_calibration_no_response": "Eine Achse hat sich kaum bewegt und lässt sich nicht kalibrieren. Beginnen Sie von vorn und bewegen Sie die Kappe jedes Mal weiter.",
+  "ui.3d_mouse_circles_help": "Die Kreise zeigen, was das Gerät nach der Kalibrierung sendet. Das Testmodell zeigt, was die Ansicht daraus macht, nach Umkehren, Geschwindigkeit und Achsenzuordnung.",
+  "ui.3d_mouse_dead_zone": "Totzone",
+  "ui.3d_mouse_dead_zone_tip": "Wie weit sich die Kappe bewegen muss, bevor sich die Ansicht bewegt, als Anteil ihres vollen Wegs. Erhöhen Sie sie, wenn die Ansicht wandert, obwohl die Kappe ruht.",
+  "ui.3d_mouse_denied": "SolidCraft sieht eine 3D-Maus, darf sie aber nicht lesen. Die udev-Regel steht in den Einrichtungshinweisen zur 3D-Maus.",
+  "ui.3d_mouse_denied_short": "Gefunden, aber nicht lesbar",
+  "ui.3d_mouse_driven_by": "Welche kalibrierte Bewegung des Geräts diese Achse steuert. Wählen Sie eine, die schon eine andere Achse nutzt, werden die beiden getauscht.",
+  "ui.3d_mouse_driven_by_label": "gesteuert von",
+  "ui.3d_mouse_driver": "3D-Maus-Treiber",
+  "ui.3d_mouse_driver_auto": "Automatisch",
+  "ui.3d_mouse_driver_direct": "Direkt (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Wird vorerst über spacenavd gelesen: das Gerät selbst ließ sich nicht öffnen.",
+  "ui.3d_mouse_driver_only_direct": "Das Gerät wird direkt gelesen; spacenavd läuft nicht",
+  "ui.3d_mouse_driver_only_spacenavd": "Lesen über spacenavd, die einzige verfügbare Möglichkeit",
+  "ui.3d_mouse_forget": "Kalibrierung verwerfen",
+  "ui.3d_mouse_ghost_left_viewport": "Ansicht links",
+  "ui.3d_mouse_ghost_left_window": "Fenster links",
+  "ui.3d_mouse_ghost_position": "Position",
+  "ui.3d_mouse_ghost_right_viewport": "Ansicht rechts",
+  "ui.3d_mouse_hint": "Ansicht gleichzeitig verschieben und drehen; Skizzen verwenden nur Schwenken und Zoomen.",
+  "ui.3d_mouse_kind_cap": "Zurück zur Mitte",
+  "ui.3d_mouse_kind_question": "Was für eine 3D-Maus ist es?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "Der Wert bleibt stehen, solange Sie halten, wie bei einem Gerät vom Typ „Zurück zur Mitte“.",
+  "ui.3d_mouse_looks_like_trackball": "Der Wert fällt zurück, sobald Sie aufhören, wie bei einem Trackball.",
+  "ui.3d_mouse_motion_rotation_x": "Rotation X",
+  "ui.3d_mouse_motion_rotation_y": "Rotation Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotation Z",
+  "ui.3d_mouse_motion_translation_x": "Translation X",
+  "ui.3d_mouse_motion_translation_y": "Translation Y",
+  "ui.3d_mouse_motion_translation_z": "Translation Z",
+  "ui.3d_mouse_navigate": "Mit der 3D-Maus navigieren",
+  "ui.3d_mouse_none": "Keine 3D-Maus gefunden",
+  "ui.3d_mouse_not_calibrated": "Nicht kalibriert",
+  "ui.3d_mouse_offer": "Die Kalibrierung Ihrer 3D-Maus behebt vertauschte oder umgekehrte Achsen und stellt Geschwindigkeit und Gefühl ein.",
+  "ui.3d_mouse_offer_never": "Nicht mehr anzeigen",
+  "ui.3d_mouse_offer_swap": "Zu Hidraw wechseln (direkter Treiber)",
+  "ui.3d_mouse_reading": "Werte",
+  "ui.3d_mouse_reset_axes": "Achsenzuordnung zurücksetzen",
+  "ui.3d_mouse_reset_view": "Ansicht zurücksetzen",
+  "ui.3d_mouse_restore": "3D-Maus-Standardwerte wiederherstellen",
+  "ui.3d_mouse_restore_ask": "3D-Maus-Einstellungen auf die Standardwerte zurücksetzen? Kalibrierung und Tastenbelegung bleiben.",
+  "ui.3d_mouse_section": "3D-Maus",
+  "ui.3d_mouse_show_in_view": "3D-Maus in der 3D-Ansicht anzeigen",
+  "ui.3d_mouse_show_in_view_tip": "Ein Bild Ihrer 3D-Maus unten links, das sich mit ihr bewegt.",
+  "ui.3d_mouse_skip": "Mein Gerät kann das nicht",
+  "ui.3d_mouse_skip_tip": "Überspringt diese Bewegung in beide Richtungen; die Kalibrierung lässt sie aus.",
   "ui.3d_mouse_speed": "Geschwindigkeit der 3D-Maus",
+  "ui.3d_mouse_step_lift": "Kappe nach oben ziehen, halten, dann loslassen.",
+  "ui.3d_mouse_step_press": "Kappe nach unten drücken, halten, dann loslassen.",
+  "ui.3d_mouse_step_pull": "Kappe zu sich heranziehen, halten, dann loslassen.",
+  "ui.3d_mouse_step_push": "Kappe von sich wegschieben, halten, dann loslassen.",
+  "ui.3d_mouse_step_rest": "Nehmen Sie die Hand von der Kappe und lassen Sie sie ruhen.",
+  "ui.3d_mouse_step_rest_trackball": "Nehmen Sie die Hand von der Kugel und lassen Sie sie ruhen.",
+  "ui.3d_mouse_step_ring_clockwise": "Drehen Sie den Scrollring ein paar Rasten im Uhrzeigersinn.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Drehen Sie den Scrollring ein paar Rasten gegen den Uhrzeigersinn.",
+  "ui.3d_mouse_step_roll_away": "Rollen Sie die Kugel ein paarmal von sich weg und lassen Sie sie dann auslaufen.",
+  "ui.3d_mouse_step_roll_left": "Rollen Sie die Kugel ein paarmal nach links und lassen Sie sie dann auslaufen.",
+  "ui.3d_mouse_step_roll_right": "Rollen Sie die Kugel ein paarmal nach rechts und lassen Sie sie dann auslaufen.",
+  "ui.3d_mouse_step_roll_toward": "Rollen Sie die Kugel ein paarmal zu sich hin und lassen Sie sie dann auslaufen.",
+  "ui.3d_mouse_step_slide_left": "Kappe nach links schieben, halten, dann loslassen.",
+  "ui.3d_mouse_step_slide_right": "Kappe nach rechts schieben, halten, dann loslassen.",
+  "ui.3d_mouse_step_spin_clockwise": "Drehen Sie die Kugel ein paarmal im Uhrzeigersinn und lassen Sie sie dann auslaufen.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Drehen Sie die Kugel ein paarmal gegen den Uhrzeigersinn und lassen Sie sie dann auslaufen.",
+  "ui.3d_mouse_step_tilt_away": "Oberseite der Kappe von sich weg kippen (die Ihnen nächste Kante geht nach oben), halten, dann loslassen.",
+  "ui.3d_mouse_step_tilt_left": "Kappe nach links kippen (linke Kante runter), halten, dann loslassen.",
+  "ui.3d_mouse_step_tilt_right": "Kappe nach rechts kippen (rechte Kante runter), halten, dann loslassen.",
+  "ui.3d_mouse_step_tilt_toward": "Oberseite der Kappe zu sich kippen (die Ihnen nächste Kante geht nach unten), halten, dann loslassen.",
+  "ui.3d_mouse_step_touch": "Legen Sie die Hand auf die Kappe, ohne zu drücken.",
+  "ui.3d_mouse_step_twist_clockwise": "Kappe im Uhrzeigersinn drehen, halten, dann loslassen.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Kappe gegen den Uhrzeigersinn drehen, halten, dann loslassen.",
+  "ui.3d_mouse_switch_cap": "Als Zurück zur Mitte kalibrieren",
+  "ui.3d_mouse_switch_trackball": "Als Trackball kalibrieren",
+  "ui.3d_mouse_view_axis": "Ansichtsachse",
+  "ui.3d_mouse_view_off": "Aus",
+  "ui.3d_mouse_view_off_tip": "Das Profil des 3D-Maus-Treibers schaltet diese Achse ab, daher bewegt ihre Bewegung die Ansicht nicht. Wählen Sie hier die Bewegung einer anderen Achse, werden die beiden getauscht und sie bewegt die Ansicht nicht mehr.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbit links / rechts",
+  "ui.3d_mouse_view_orbit_up_down": "Orbit hoch / runter",
+  "ui.3d_mouse_view_pan_sideways": "Schwenken links / rechts",
+  "ui.3d_mouse_view_pan_up_down": "Schwenken hoch / runter",
+  "ui.3d_mouse_view_roll": "Rollen",
+  "ui.3d_mouse_view_unmapped": "Achse {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "Warte auf Bewegung",
+  "ui.3d_mouse_wiggle": "Falls eine angeschlossen ist, bewegen Sie sie kurz.",
   "ui.3d_sketch": "3D-Skizze",
   "ui.activate": "Aktivieren",
   "ui.active_component": "Aktive Komponente",
@@ -1472,6 +1711,7 @@
   "ui.blocked": "Verdeckt",
   "ui.bodies": "Körper",
   "ui.bodies_all_if_none": "Körper (alle, wenn keine)",
+  "ui.bottom": "Unten",
   "ui.box": "Block",
   "ui.break": "Unterbrechen",
   "ui.browser_bodies_one": "{count} Körper",
@@ -1627,6 +1867,7 @@
   "ui.grid_follows_view_hint": "Seitenansichten zeigen das Raster auf der aufrechten Ebene, die ihnen zugewandt ist, statt auf dem Boden",
   "ui.ground_shadow": "Bodenschatten",
   "ui.groupSelected": "Auswahl gruppieren",
+  "ui.hatch": "Schraffur",
   "ui.heading_add_ins": "ADD-INS",
   "ui.heading_assemble": "ZUSAMMENBAU",
   "ui.heading_box": "BLOCK",
@@ -1893,6 +2134,12 @@
   "ui.sent_to_slicer": "An {slicer} gesendet",
   "ui.sheet_gap": "Spalt",
   "ui.shell": "Hülle",
+  "ui.shortcut_capture_add_key": "Eine normale Taste hinzufügen. Escape bricht ab.",
+  "ui.shortcut_capture_hint": "Eine Belegung anklicken, dann Modifikatortasten und eine Taste drücken. Weitere Modifikatoren innerhalb einer Sekunde hinzufügen; zum Bestätigen alle Tasten loslassen. Escape bricht ab.",
+  "ui.shortcut_capture_press": "Modifikatortasten und eine Taste drücken. Escape bricht ab.",
+  "ui.shortcut_capture_release": "Zum Bestätigen alle Tasten loslassen. Escape bricht ab.",
+  "ui.shortcut_capture_settling": "Tastenkürzel wird bestätigt… Escape bricht ab.",
+  "ui.shortcut_multiple_keys": "Modifikatortasten und nur eine weitere Taste verwenden. Zum Wiederholen die Belegung anklicken.",
   "ui.show": "Einblenden",
   "ui.showAll": "Alle einblenden",
   "ui.showAllBodies": "Alle Volumenkörper einblenden",
@@ -1922,59 +2169,6 @@
   "ui.smooth_wheel_zoom": "Sanftes Zoomen mit dem Rad",
   "ui.smooth_wheel_zoom_tip": "Ausschalten, um jedes Radereignis sofort anzuwenden, ohne Nachlauf",
   "ui.snap": "Einrasten",
-  "ui.space_mouse_axes_reassigned": "Die Achsen sind in den Einstellungen neu zugeordnet, und das gilt auch nach dieser Kalibrierung.",
-  "ui.space_mouse_calibrate": "Kalibrieren…",
-  "ui.space_mouse_calibrate_tip": "Bewegen Sie die Kappe so, wie das Fenster es verlangt. So lernt SolidCraft, in welche Richtung und wie weit jede Achse dieser 3D-Maus geht. Wird für diese 3D-Maus gespeichert.",
-  "ui.space_mouse_calibrate_title": "3D-Maus kalibrieren",
-  "ui.space_mouse_calibrated": "Kalibriert",
-  "ui.space_mouse_calibration": "3D-Maus-Kalibrierung",
-  "ui.space_mouse_calibration_done": "Fertig. Speichern Sie die Kalibrierung, damit sie immer gilt, wenn diese 3D-Maus angeschlossen ist.",
-  "ui.space_mouse_calibration_no_response": "Eine Achse hat sich kaum bewegt und lässt sich nicht kalibrieren. Beginnen Sie von vorn und bewegen Sie die Kappe jedes Mal weiter.",
-  "ui.space_mouse_dead_zone": "Totzone",
-  "ui.space_mouse_dead_zone_tip": "Wie weit sich die Kappe bewegen muss, bevor sich die Ansicht bewegt, als Anteil ihres vollen Wegs. Erhöhen Sie sie, wenn die Ansicht wandert, obwohl die Kappe ruht.",
-  "ui.space_mouse_driven_by": "Welche kalibrierte Bewegung des Geräts diese Achse steuert. Wählen Sie eine, die schon eine andere Achse nutzt, werden die beiden getauscht.",
-  "ui.space_mouse_driven_by_label": "gesteuert von",
-  "ui.space_mouse_driver": "3D-Maus-Treiber",
-  "ui.space_mouse_driver_auto": "Automatisch",
-  "ui.space_mouse_driver_direct": "Direkt (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Das Gerät wird direkt gelesen; spacenavd läuft nicht",
-  "ui.space_mouse_driver_only_spacenavd": "Lesen über spacenavd, die einzige verfügbare Möglichkeit",
-  "ui.space_mouse_forget": "Kalibrierung vergessen",
-  "ui.space_mouse_hint": "Ansicht gleichzeitig verschieben und drehen; Skizzen verwenden nur Schwenken und Zoomen.",
-  "ui.space_mouse_motion_rotation_x": "Rotation X",
-  "ui.space_mouse_motion_rotation_y": "Rotation Y",
-  "ui.space_mouse_motion_rotation_z": "Rotation Z",
-  "ui.space_mouse_motion_translation_x": "Translation X",
-  "ui.space_mouse_motion_translation_y": "Translation Y",
-  "ui.space_mouse_motion_translation_z": "Translation Z",
-  "ui.space_mouse_navigate": "Mit SpaceNavigator / SpaceMouse navigieren",
-  "ui.space_mouse_none": "Keine 3D-Maus gefunden",
-  "ui.space_mouse_not_calibrated": "Nicht kalibriert",
-  "ui.space_mouse_reading": "Werte",
-  "ui.space_mouse_reset_axes": "Achsenzuordnung zurücksetzen",
-  "ui.space_mouse_step_lift": "Kappe nach oben ziehen, halten, dann loslassen.",
-  "ui.space_mouse_step_press": "Kappe nach unten drücken, halten, dann loslassen.",
-  "ui.space_mouse_step_pull": "Kappe zu sich heranziehen, halten, dann loslassen.",
-  "ui.space_mouse_step_push": "Kappe von sich wegschieben, halten, dann loslassen.",
-  "ui.space_mouse_step_rest": "Nehmen Sie die Hand von der Kappe und lassen Sie sie ruhen.",
-  "ui.space_mouse_step_slide_left": "Kappe nach links schieben, halten, dann loslassen.",
-  "ui.space_mouse_step_slide_right": "Kappe nach rechts schieben, halten, dann loslassen.",
-  "ui.space_mouse_step_tilt_back": "Kappe nach hinten kippen (Vorderkante hoch), halten, dann loslassen.",
-  "ui.space_mouse_step_tilt_forward": "Kappe nach vorn kippen (Vorderkante runter), halten, dann loslassen.",
-  "ui.space_mouse_step_tilt_left": "Kappe nach links kippen (linke Kante runter), halten, dann loslassen.",
-  "ui.space_mouse_step_tilt_right": "Kappe nach rechts kippen (rechte Kante runter), halten, dann loslassen.",
-  "ui.space_mouse_step_twist_clockwise": "Kappe im Uhrzeigersinn drehen, halten, dann loslassen.",
-  "ui.space_mouse_step_twist_counterclockwise": "Kappe gegen den Uhrzeigersinn drehen, halten, dann loslassen.",
-  "ui.space_mouse_view_axis": "Ansichtsachse",
-  "ui.space_mouse_view_off": "Aus",
-  "ui.space_mouse_view_off_tip": "Das Profil des 3D-Maus-Treibers schaltet diese Achse ab, daher bewegt ihre Bewegung die Ansicht nicht. Wählen Sie hier die Bewegung einer anderen Achse, werden die beiden getauscht und sie bewegt die Ansicht nicht mehr.",
-  "ui.space_mouse_view_orbit_sideways": "Orbit links / rechts",
-  "ui.space_mouse_view_orbit_up_down": "Orbit hoch / runter",
-  "ui.space_mouse_view_pan_sideways": "Schwenken links / rechts",
-  "ui.space_mouse_view_pan_up_down": "Schwenken hoch / runter",
-  "ui.space_mouse_view_roll": "Rollen",
-  "ui.space_mouse_view_unmapped": "Achse {n}",
-  "ui.space_mouse_view_zoom": "Zoom",
   "ui.spacing": "Abstand",
   "ui.spacing_2": "Abstand 2",
   "ui.sphere": "Sphäre",
@@ -2016,7 +2210,7 @@
   "ui.top": "Oben",
   "ui.torus": "Torus",
   "ui.total_angle": "Gesamtwinkel",
-  "ui.trackpad_pan_tip": "Trackpad-Gesten schwenken (aus: sie zoomen wie das Rad); Mausrad zoomt, Daumenrad schwenkt seitlich, Pinch zoomt immer",
+  "ui.trackpad_pan_tip": "Scrollen mit zwei Fingern verschiebt die Ansicht; bei Fusion dreht Umschalt + zwei Finger die Ansicht. Aus: Scrollen zoomt. Mausrad und Pinch-Geste zoomen; das Daumenrad verschiebt seitlich.",
   "ui.trim": "Kürzen",
   "ui.twist": "Verdrehung",
   "ui.two_finger_scroll_pans": "Zwei-Finger-Scrollen schwenkt",

assets/locales/en-GB.json

@@ -7,6 +7,8 @@
   "Modeled": "Modelled",
   "cmd.construct_point_center": "Point At Centre Of Circle/Sphere/Torus",
   "cmd.inspect_center_of_mass": "Centre of Mass",
+  "cmd.render_aging_describe": "Layered Surface Aging",
+  "cmd.render_effects_describe": "Lens and Creative Effects",
   "cmd.sketch_arc_center_point": "Centre Point Arc",
   "cmd.sketch_circle_center": "Centre Diameter Circle",
   "cmd.sketch_rectangle_center": "Centre Rectangle",
@@ -14,8 +16,83 @@
   "cmd.sketch_slot_center_point": "Centre Point Slot",
   "cmd.sketch_slot_center_to_center": "Centre to Centre Slot",
   "pattern.alignment_hint": "Counts include the original. Centre balances copies; Flip chooses the extra side for even totals.",
+  "render.aging_add": "Add aging layer",
+  "render.aging_airborne": "Airborne dust / participating medium",
+  "render.aging_airborne_help": "Airborne dust is a separate finite homogeneous scattering volume. It changes transport and raw EXR, not the surface-aging stack. Existing volume/glass/denoising restrictions remain explicit; no atmosphere is added automatically.",
+  "render.aging_all_bodies": "All eligible opaque bodies",
+  "render.aging_chips": "Chipped paint",
+  "render.aging_class_any": "All opaque material classes",
+  "render.aging_class_dielectric": "Nonmetallic surfaces only",
+  "render.aging_class_metal": "Metallic surfaces only",
+  "render.aging_color": "Layer colour · sRGB",
+  "render.aging_coverage": "Coverage",
+  "render.aging_dust": "Deposited dust",
+  "render.aging_empty": "No aging layers: the original surfaces remain unchanged.",
+  "render.aging_fading": "Faded coating",
+  "render.aging_grime": "Grime & staining",
+  "render.aging_help": "Combine up to eight optical layers, in order. Rust and patina are authored appearances, not age/corrosion simulations. Scale is in world millimetres. No geometry, mass or engineering property is changed; glass and passive stages are excluded.",
+  "render.aging_metallic": "Layer metallic fraction",
+  "render.aging_origin": "Field origin · world mm",
+  "render.aging_patina": "Copper-green patina",
+  "render.aging_refresh_targets": "Inspect current bodies",
+  "render.aging_roughness": "Layer roughness",
+  "render.aging_rust": "Oxidized iron / rust",
+  "render.aging_scale": "Pattern scale",
+  "render.aging_scratches": "Fine scratches",
+  "render.aging_target": "Target & coordinates",
+  "render.aging_target_help": "A named target must still match its captured index and name. Global masks are world-anchored; they do not follow moving parts. This is neither cavity detection nor true edge wear. Filter the list to reach additional bodies.",
+  "render.aging_target_search": "Filter body names",
+  "render.aging_upward": "Upward-facing deposition",
+  "render.backdrop_x": "Centre X",
+  "render.backdrop_y": "Centre Y",
+  "render.background_camera_section": "Camera background · PNG presentation",
+  "render.background_completed_frozen": "The displayed result is a frozen completed image. Editing a background does not repaint that result automatically. Use Regrade for camera-only changes, or Render for a new physical stage.",
+  "render.background_hdr_separate": "The current HDR resources illuminate and reflect on surfaces; they are not automatically displayed as a panorama behind the subject. Changing a gradient does not rotate or recolour the lighting.",
+  "render.background_lighting_section": "HDR illumination · separate from camera background",
+  "render.background_no_alpha_override": "A camera background is not added to transparent output silently. Raw-master regrading uses captured coverage and does not reapply denoising; the source EXR remains unchanged.",
+  "render.background_regrade": "Apply to retained raw master",
+  "render.background_stage_occlusion": "This shot includes physical stage geometry. A large floor or wall can fill the frame and hide a camera-only background. Clear or resize the stage deliberately, or change its physical reflectance. Regrading cannot remove captured geometry.",
+  "render.background_workflow": "Choose the background you intend: a camera-only colour/gradient, a physical stage that receives light, or HDR illumination. They are independent. Live Preview is a modelling view; render a new image or regrade a retained master to see camera finishing.",
+  "render.chromatic_offset": "Chromatic edge offset",
+  "render.effects_gpu_only": "These effects require GPU path tracing. Changing the page never switches the renderer automatically.",
+  "render.effects_help": "Combine ordered colour looks and image-space lens effects. Rendering and raw-master regrading use the same saved settings. Raw EXR stays unchanged. These are original artistic controls, not calibrated lens or branded-film emulations.",
+  "render.effects_reset_lens": "Reset lens effects",
+  "render.effects_seed": "Pattern seed",
+  "render.film_grain": "Photographic grain",
+  "render.flare_ghosts": "Ghost rings per source",
+  "render.flare_halo": "Flare halo",
+  "render.flare_streak": "Anamorphic-style streak",
+  "render.flare_strength": "Highlight flare strength",
+  "render.flare_threshold": "Scene-linear flare threshold",
+  "render.layer_down": "Move down",
+  "render.layer_enabled": "Layer enabled",
+  "render.layer_remove": "Remove layer",
+  "render.layer_strength": "Layer strength",
+  "render.layer_up": "Move up",
+  "render.lens_effects_help": "Flare uses up to four separated bright sources in the actual linear image. Ghosts, halo, streaks, chromatic offsets and radial distortion are artistic image-space approximations. Spatial effects need opaque output; outside samples extend the image edge. Grain is deterministic. No physics, EXR or geometry is altered.",
+  "render.lens_effects_title": "Lens-inspired & photographic",
+  "render.look_add": "Add colour look",
+  "render.look_bleach": "Bleach-bypass-inspired",
+  "render.look_cool": "Cool",
+  "render.look_cyanotype": "Cyanotype-inspired",
+  "render.look_faded": "Faded print",
+  "render.look_mono": "Monochrome",
+  "render.look_sepia": "Sepia",
+  "render.look_strength": "Look strength",
+  "render.look_teal_orange": "Teal / orange",
+  "render.look_title": "Creative look stack",
+  "render.look_warm": "Warm",
   "render.opaque_preview_help": "Opaque PBR and simple colours; blended transparency. Refraction, HDRI and final rendering are not available yet.",
+  "render.page_aging": "Aging & contamination",
+  "render.page_background": "Backgrounds",
+  "render.page_effects": "Lens & finishing effects",
+  "render.radial_distortion": "Radial distortion",
+  "render.ribbon_aging": "Aging",
+  "render.ribbon_effects": "Effects",
+  "render.sharpening": "Detail sharpening",
+  "render.soft_focus": "Soft focus",
   "sketch_text.align_center": "Centre",
+  "ui.3d_mouse_step_pull": "Pull the cap towards you, hold it, then let go.",
   "ui.center": "Centre",
   "ui.centerline": "Centreline",
   "ui.customizeToolbar": "Customise Toolbar…",
@@ -24,7 +101,6 @@
   "ui.layout_compact": "Compact",
   "ui.layout_floating": "Floating",
   "ui.ribbon_labels": "Show text under ribbon icons",
-  "ui.space_mouse_step_pull": "Pull the cap towards you, hold it, then let go.",
   "ui.workspace_layout": "Workspace layout",
   "ui.zoom_to_cursor_tip": "The wheel zooms towards the point under the cursor (off: towards the view's centre)",
   "update.prefs_flatpak": "Flatpak updates this copy ({version}): run {command} or use your software centre. SolidCraft doesn't check."

assets/locales/fr.json

@@ -72,6 +72,7 @@
   "Choose…": "Choisir…",
   "Circular": "Circulaire",
   "Circumference": "Circonférence",
+  "Clockwise": "Horaire",
   "Close draft": "Fermer le brouillon",
   "Collisions": "Collisions",
   "Colour": "Couleur",
@@ -322,6 +323,7 @@
   "Search commands": "Rechercher des commandes",
   "Search this library": "Rechercher dans cette bibliothèque",
   "Section": "Coupe",
+  "Section position": "Position de la section",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Sélectionner un autre élément : maintenir le bouton gauche immobile sur le modèle (ou clic droit › Sélectionner un autre…) pour lister tout ce qui se trouve sous le curseur ; cliquer de nouveau au même endroit pour sélectionner l'élément suivant. Double-cliquer avec le bouton du milieu pour revenir à l'accueil (Préférences › Navigation).",
   "Select bodies (a face picks its body)": "Sélectionner des corps (une face sélectionne son corps)",
   "Select bodies or faces instead": "Sélectionner plutôt des corps ou des faces",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft s'est fermé avant l'enregistrement de ces conceptions. Leur dernier enregistrement automatique peut être ouvert.",
   "Specialise": "Spécialiser",
   "Speed": "Vitesse",
+  "Square": "Carré",
   "Stand it up": "Redresser",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Redresser : un quart de tour autour de X, sous forme d'une fonction Déplacer que vous pouvez annuler.",
   "Stand this part up?": "Redresser cette pièce ?",
+  "Start angle": "Angle de départ",
   "Start bulge": "Renflement de début",
   "Start continuity": "Continuité de début",
   "Step": "Étape",
@@ -412,6 +416,7 @@
   "angle, height": "angle, hauteur",
   "appearance.dielectric_ior": "Indice de réfraction (diélectrique)",
   "appearance.metallic": "Métallique",
+  "appearance.only_available": "Apparences disponibles uniquement",
   "appearance.pbr_help": "Voir cette surface dans l'espace Rendu ou dans un PNG du produit. Sans réfraction ni transmission.",
   "appearance.pbr_opaque": "PBR opaque",
   "appearance.roughness": "Rugosité",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Insérer un STEP",
   "cmd.file_save_mesh": "Enregistrer comme maillage",
   "cmd.file_slicers": "Slicers installés",
+  "cmd.frame_member": "Élément de structure",
+  "cmd.frame_profile_insert": "Insérer un profilé",
+  "cmd.frame_profile_list": "Bibliothèque de profilés",
+  "cmd.frame_profile_properties": "Propriétés du profilé",
   "cmd.inspect_accessibility": "Analyse d'accessibilité",
   "cmd.inspect_center_of_mass": "Centre de gravité",
   "cmd.inspect_clearance": "Jeu",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Nouveau matériau physique",
   "cmd.material_delete": "Supprimer le matériau physique",
   "cmd.material_edit": "Modifier le matériau physique",
+  "cmd.material_inspect": "Inspecter le matériau physique",
   "cmd.material_list": "Lister les matériaux",
   "cmd.material_properties_directional": "Module d'élasticité directionnel",
   "cmd.material_properties_validate": "Valider les données du matériau physique",
@@ -1044,13 +1054,13 @@
   "sample.bracket.name": "Équerre en tôle",
   "sample.enclosure.about": "Boîte en coque avec lèvre, bossages de vis, appui et clip",
   "sample.enclosure.name": "Boîtier plastique",
-  "sample.flange.about": "Moyeu et bride avec un réseau circulaire piloté par un paramètre",
+  "sample.flange.about": "Moyeu et bride avec une répétition circulaire pilotée par un paramètre",
   "sample.flange.name": "Bride boulonnée",
   "sample.hinge.about": "Deux composants et une liaison pivot, entraînée à 60°",
   "sample.hinge.name": "Assemblage de charnière",
   "sample.plate.about": "Plaque paramétrique avec congés, perçages et un bossage alésé",
   "sample.plate.name": "Plaque d'exemple",
-  "sample.vents.about": "Rainures en réseau rectangulaire : lignes, colonnes et pas sont des paramètres",
+  "sample.vents.about": "Rainures en répétition rectangulaire : lignes, colonnes et pas sont des paramètres",
   "sample.vents.name": "Plaque d'aération",
   "search.command_keys": "Entrée exécuter     Maj+Entrée exécuter et garder ouvert     Échap fermer",
   "search.commands": "Commandes",
@@ -1072,6 +1082,8 @@
   "settings.msaa_applies_on_restart": "L'anticrénelage s'appliquera au prochain démarrage de SolidCraft",
   "settings.msaa_reset": "{setting} : {requested}× n'est pas pris en charge par ce périphérique graphique ; la valeur est désormais {reset}× (pris en charge : {supported}).",
   "settings.msaa_unsupported": "Non pris en charge par ce périphérique graphique",
+  "settings.reference_geometry_through_bodies": "Afficher la géométrie de référence à travers les corps",
+  "settings.reference_geometry_through_bodies_help": "Afficher les contours des esquisses inactives et les plans de référence par-dessus les corps ombrés",
   "settings.reset_intro": "Ces réglages ne fonctionnent pas sur cet ordinateur et empêcheraient SolidCraft de démarrer ; ils ont donc été modifiés :",
   "settings.reset_title": "Des réglages ont été modifiés",
   "settings.supersampling_note": "Dessine la vue à une résolution plus élevée puis la réduit : arêtes, lignes et grille plus lisses sur les écrans de définition inférieure à la 4K. Cela coûte du temps GPU : environ 2,25× plus de pixels à 1,5× et 4× plus à 2×.",
@@ -1127,7 +1139,106 @@
   "trace.stopped_by_contact": "Se termine à l'échantillon {sample} : {a} traverserait {b}",
   "trace.stopped_by_loop": "Se termine à l'échantillon {sample} : la boucle passant par {joint} ne peut plus se fermer",
   "ui.1_degree_of_freedom": "1 degré de liberté",
+  "ui.3d_mouse_axes_reassigned": "Les axes sont réattribués dans les Préférences, et cela s'applique toujours en plus de ce calibrage.",
+  "ui.3d_mouse_button": "Bouton {number}",
+  "ui.3d_mouse_button_nothing": "Rien",
+  "ui.3d_mouse_button_settings": "Réglages de la souris 3D",
+  "ui.3d_mouse_buttons": "Boutons",
+  "ui.3d_mouse_buttons_hint": "Appuyez sur un bouton de votre souris 3D pour le trouver ici, puis choisissez ce qu'il fait.",
+  "ui.3d_mouse_buttons_no_device": "Branchez une souris 3D pour choisir ce que font ses boutons.",
+  "ui.3d_mouse_buttons_reset": "Rétablir les boutons par défaut",
+  "ui.3d_mouse_calibrate": "Calibrer…",
+  "ui.3d_mouse_calibrate_tip": "Déplacez le capuchon comme la fenêtre le demande, pour que SolidCraft apprenne dans quel sens et jusqu'où va chaque axe de cette souris 3D. Enregistré pour cette souris 3D.",
+  "ui.3d_mouse_calibrate_title": "Calibrer la souris 3D",
+  "ui.3d_mouse_calibrate_wait": "Bougez la souris 3D une fois pour que SolidCraft la voie.",
+  "ui.3d_mouse_calibrated": "Calibrée",
+  "ui.3d_mouse_calibration": "Calibrage de la souris 3D",
+  "ui.3d_mouse_calibration_done": "Terminé. Enregistrez-le pour l'utiliser chaque fois que cette souris 3D est connectée.",
+  "ui.3d_mouse_calibration_no_response": "Un axe a à peine bougé, il ne peut donc pas être calibré. Recommencez en déplaçant le capuchon plus loin à chaque fois.",
+  "ui.3d_mouse_circles_help": "Les cercles montrent ce que l'appareil envoie après calibrage. Le modèle d'essai montre ce que la vue en fait, après inversion, vitesse et affectation des axes.",
+  "ui.3d_mouse_dead_zone": "Zone morte",
+  "ui.3d_mouse_dead_zone_tip": "De combien le capuchon doit bouger avant que la vue ne bouge, en part de sa course complète. Augmentez-la si la vue dérive alors que le capuchon est au repos.",
+  "ui.3d_mouse_denied": "SolidCraft voit une souris 3D mais n'a pas le droit de la lire. La règle udev est dans les notes d'installation de la souris 3D.",
+  "ui.3d_mouse_denied_short": "Trouvée, mais illisible",
+  "ui.3d_mouse_driven_by": "Quel mouvement calibré de l'appareil pilote cet axe. Choisir un mouvement déjà utilisé par un autre axe les échange.",
+  "ui.3d_mouse_driven_by_label": "piloté par",
+  "ui.3d_mouse_driver": "Pilote de la souris 3D",
+  "ui.3d_mouse_driver_auto": "Automatique",
+  "ui.3d_mouse_driver_direct": "Direct (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Lecture via spacenavd pour l'instant : l'appareil lui-même n'a pas pu être ouvert.",
+  "ui.3d_mouse_driver_only_direct": "Lecture directe du périphérique ; spacenavd n'est pas lancé",
+  "ui.3d_mouse_driver_only_spacenavd": "Lecture via spacenavd, seule possibilité disponible",
+  "ui.3d_mouse_forget": "Oublier le calibrage",
+  "ui.3d_mouse_ghost_left_viewport": "Vue à gauche",
+  "ui.3d_mouse_ghost_left_window": "Fenêtre à gauche",
+  "ui.3d_mouse_ghost_position": "Position",
+  "ui.3d_mouse_ghost_right_viewport": "Vue à droite",
+  "ui.3d_mouse_hint": "Déplace et fait pivoter la vue en même temps ; dans les esquisses, seuls le panoramique et le zoom sont utilisés.",
+  "ui.3d_mouse_kind_cap": "Retour au centre",
+  "ui.3d_mouse_kind_question": "Quel type de souris 3D est-ce ?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "La valeur reste tant que vous maintenez, comme sur un appareil de type « Retour au centre ».",
+  "ui.3d_mouse_looks_like_trackball": "La valeur retombe dès que vous arrêtez de bouger, comme sur un trackball.",
+  "ui.3d_mouse_motion_rotation_x": "Rotation X",
+  "ui.3d_mouse_motion_rotation_y": "Rotation Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotation Z",
+  "ui.3d_mouse_motion_translation_x": "Translation X",
+  "ui.3d_mouse_motion_translation_y": "Translation Y",
+  "ui.3d_mouse_motion_translation_z": "Translation Z",
+  "ui.3d_mouse_navigate": "Naviguer avec la souris 3D",
+  "ui.3d_mouse_none": "Aucune souris 3D trouvée",
+  "ui.3d_mouse_not_calibrated": "Non calibrée",
+  "ui.3d_mouse_offer": "Calibrer votre souris 3D corrige les axes échangés ou inversés et règle sa vitesse et sa sensation.",
+  "ui.3d_mouse_offer_never": "Ne plus afficher",
+  "ui.3d_mouse_offer_swap": "Passer à Hidraw (pilote direct)",
+  "ui.3d_mouse_reading": "Lecture",
+  "ui.3d_mouse_reset_axes": "Réinitialiser l'attribution des axes",
+  "ui.3d_mouse_reset_view": "Réinitialiser la vue",
+  "ui.3d_mouse_restore": "Rétablir les réglages de la souris 3D",
+  "ui.3d_mouse_restore_ask": "Remettre les réglages de la souris 3D par défaut ? Votre calibrage et l'assignation des boutons sont conservés.",
+  "ui.3d_mouse_section": "Souris 3D",
+  "ui.3d_mouse_show_in_view": "Afficher la souris 3D dans la vue 3D",
+  "ui.3d_mouse_show_in_view_tip": "Une image de votre souris 3D dans le coin inférieur gauche, qui bouge quand vous la bougez.",
+  "ui.3d_mouse_skip": "Mon appareil ne peut pas le faire",
+  "ui.3d_mouse_skip_tip": "Ignore ce mouvement dans les deux sens ; la calibration le laisse de côté.",
   "ui.3d_mouse_speed": "Vitesse de la souris 3D",
+  "ui.3d_mouse_step_lift": "Soulevez le capuchon, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_press": "Appuyez sur le capuchon, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_pull": "Tirez le capuchon vers vous, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_push": "Poussez le capuchon loin de vous, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_rest": "Lâchez le capuchon et laissez-le immobile.",
+  "ui.3d_mouse_step_rest_trackball": "Lâchez la boule et laissez-la immobile.",
+  "ui.3d_mouse_step_ring_clockwise": "Tournez l'anneau de défilement de quelques crans dans le sens horaire.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Tournez l'anneau de défilement de quelques crans dans le sens antihoraire.",
+  "ui.3d_mouse_step_roll_away": "Faites rouler la boule loin de vous plusieurs fois, puis laissez-la s'arrêter.",
+  "ui.3d_mouse_step_roll_left": "Faites rouler la boule vers la gauche plusieurs fois, puis laissez-la s'arrêter.",
+  "ui.3d_mouse_step_roll_right": "Faites rouler la boule vers la droite plusieurs fois, puis laissez-la s'arrêter.",
+  "ui.3d_mouse_step_roll_toward": "Faites rouler la boule vers vous plusieurs fois, puis laissez-la s'arrêter.",
+  "ui.3d_mouse_step_slide_left": "Glissez le capuchon vers la gauche, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_slide_right": "Glissez le capuchon vers la droite, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_spin_clockwise": "Faites tourner la boule dans le sens horaire plusieurs fois, puis laissez-la s'arrêter.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Faites tourner la boule dans le sens antihoraire plusieurs fois, puis laissez-la s'arrêter.",
+  "ui.3d_mouse_step_tilt_away": "Inclinez le haut du capuchon loin de vous (le bord le plus proche monte), maintenez, puis relâchez.",
+  "ui.3d_mouse_step_tilt_left": "Inclinez le capuchon vers la gauche (bord gauche vers le bas), maintenez, puis relâchez.",
+  "ui.3d_mouse_step_tilt_right": "Inclinez le capuchon vers la droite (bord droit vers le bas), maintenez, puis relâchez.",
+  "ui.3d_mouse_step_tilt_toward": "Inclinez le haut du capuchon vers vous (le bord le plus proche descend), maintenez, puis relâchez.",
+  "ui.3d_mouse_step_touch": "Posez la main sur le capuchon sans le pousser.",
+  "ui.3d_mouse_step_twist_clockwise": "Tournez le capuchon dans le sens horaire, maintenez, puis relâchez.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Tournez le capuchon dans le sens antihoraire, maintenez, puis relâchez.",
+  "ui.3d_mouse_switch_cap": "Calibrer comme retour au centre",
+  "ui.3d_mouse_switch_trackball": "Calibrer comme un trackball",
+  "ui.3d_mouse_view_axis": "Axe de la vue",
+  "ui.3d_mouse_view_off": "Désactivé",
+  "ui.3d_mouse_view_off_tip": "Le profil du pilote de la souris 3D désactive cet axe : son mouvement ne déplace pas la vue. Choisir ici le mouvement d'un autre axe les échange, et ce mouvement cesse de déplacer la vue.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbite gauche / droite",
+  "ui.3d_mouse_view_orbit_up_down": "Orbite haut / bas",
+  "ui.3d_mouse_view_pan_sideways": "Panoramique gauche / droite",
+  "ui.3d_mouse_view_pan_up_down": "Panoramique haut / bas",
+  "ui.3d_mouse_view_roll": "Roulis",
+  "ui.3d_mouse_view_unmapped": "Axe {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "En attente de mouvement",
+  "ui.3d_mouse_wiggle": "Si vous en avez une de branchée, remuez-la.",
   "ui.3d_sketch": "Esquisse 3D",
   "ui.activate": "Activer",
   "ui.active_component": "Composant actif",
@@ -1357,6 +1468,7 @@
   "ui.blocked": "Inaccessible",
   "ui.bodies": "Corps",
   "ui.bodies_all_if_none": "Corps (tous si aucun)",
+  "ui.bottom": "Dessous",
   "ui.box": "Boîte",
   "ui.break": "Fractionner",
   "ui.browser_bodies_one": "{count} corps",
@@ -1374,7 +1486,7 @@
   "ui.chamfer_type": "Type de chanfrein",
   "ui.change_workspace": "Changer d'espace de travail",
   "ui.circle": "Cercle",
-  "ui.circular_pattern": "Réseau circulaire",
+  "ui.circular_pattern": "Répétition circulaire",
   "ui.clear": "Effacer",
   "ui.clear_recent": "Effacer les récents",
   "ui.clear_the_selection": "Effacer la sélection",
@@ -1509,11 +1621,12 @@
   "ui.grid_follows_view_hint": "Dans les vues de côté, la grille s'affiche sur le plan vertical qui leur fait face plutôt que sur le sol",
   "ui.ground_shadow": "Ombre au sol",
   "ui.groupSelected": "Grouper la sélection",
+  "ui.hatch": "Hachures",
   "ui.heading_add_ins": "COMPLÉMENTS",
   "ui.heading_assemble": "ASSEMBLER",
   "ui.heading_box": "BOÎTE",
   "ui.heading_chamfer": "CHANFREIN",
-  "ui.heading_circular_pattern": "RÉSEAU CIRCULAIRE",
+  "ui.heading_circular_pattern": "RÉPÉTITION CIRCULAIRE",
   "ui.heading_coil": "HÉLICE",
   "ui.heading_combine": "COMBINER",
   "ui.heading_configure": "CONFIGURER",
@@ -1546,14 +1659,14 @@
   "ui.heading_offset_plane": "PLAN DÉCALÉ",
   "ui.heading_ok": "OK",
   "ui.heading_parameters": "PARAMÈTRES",
-  "ui.heading_pattern": "RÉSEAU",
-  "ui.heading_pattern_on_path": "RÉSEAU SUR TRAJECTOIRE",
+  "ui.heading_pattern": "RÉPÉTITION",
+  "ui.heading_pattern_on_path": "RÉPÉTITION SUR TRAJECTOIRE",
   "ui.heading_pipe": "TUYAU",
   "ui.heading_plane_at_angle": "PLAN INCLINÉ",
   "ui.heading_plastic": "PLASTIQUE",
   "ui.heading_position": "POSITION",
   "ui.heading_prepare": "PRÉPARER",
-  "ui.heading_rectangular_pattern": "RÉSEAU RECTANGULAIRE",
+  "ui.heading_rectangular_pattern": "RÉPÉTITION RECTANGULAIRE",
   "ui.heading_revolve": "RÉVOLUTION",
   "ui.heading_right": "DROITE",
   "ui.heading_save_mesh": "ENREGISTRER COMME MAILLAGE",
@@ -1683,7 +1796,7 @@
   "ui.part_size_shared": "Reconstruit la pièce en remplaçant les entités ajoutées. Toutes les occurrences de ce composant sont mises à jour.",
   "ui.paste": "Coller",
   "ui.path": "Trajectoire",
-  "ui.pattern_on_path": "Réseau sur trajectoire",
+  "ui.pattern_on_path": "Répétition sur trajectoire",
   "ui.perpendicular": "Perpendicularité",
   "ui.perspective_view": "Vue en perspective",
   "ui.pinToShortcuts": "Épingler aux raccourcis",
@@ -1720,7 +1833,7 @@
   "ui.rail_fit": "Ajustement au rail",
   "ui.reachable": "Accessible",
   "ui.rectangle": "Rectangle",
-  "ui.rectangular_pattern": "Réseau rectangulaire",
+  "ui.rectangular_pattern": "Répétition rectangulaire",
   "ui.redo": "Rétablir",
   "ui.relink_design_changed": "L’assemblage a changé pendant le choix d’une source. Relancez Relier à nouveau la source.",
   "ui.relink_done": "Source reliée à nouveau pour toutes les instances.",
@@ -1799,59 +1912,6 @@
   "ui.smooth_wheel_zoom": "Zoom fluide à la molette",
   "ui.smooth_wheel_zoom_tip": "Désactiver pour appliquer chaque cran de molette immédiatement, sans lissage",
   "ui.snap": "Accrochage",
-  "ui.space_mouse_axes_reassigned": "Les axes sont réattribués dans les Préférences, et cela s'applique toujours en plus de ce calibrage.",
-  "ui.space_mouse_calibrate": "Calibrer…",
-  "ui.space_mouse_calibrate_tip": "Déplacez le capuchon comme la fenêtre le demande, pour que SolidCraft apprenne dans quel sens et jusqu'où va chaque axe de cette souris 3D. Enregistré pour cette souris 3D.",
-  "ui.space_mouse_calibrate_title": "Calibrer la souris 3D",
-  "ui.space_mouse_calibrated": "Calibrée",
-  "ui.space_mouse_calibration": "Calibrage de la souris 3D",
-  "ui.space_mouse_calibration_done": "Terminé. Enregistrez-le pour l'utiliser chaque fois que cette souris 3D est connectée.",
-  "ui.space_mouse_calibration_no_response": "Un axe a à peine bougé, il ne peut donc pas être calibré. Recommencez en déplaçant le capuchon plus loin à chaque fois.",
-  "ui.space_mouse_dead_zone": "Zone morte",
-  "ui.space_mouse_dead_zone_tip": "De combien le capuchon doit bouger avant que la vue ne bouge, en part de sa course complète. Augmentez-la si la vue dérive alors que le capuchon est au repos.",
-  "ui.space_mouse_driven_by": "Quel mouvement calibré de l'appareil pilote cet axe. Choisir un mouvement déjà utilisé par un autre axe les échange.",
-  "ui.space_mouse_driven_by_label": "piloté par",
-  "ui.space_mouse_driver": "Pilote de la souris 3D",
-  "ui.space_mouse_driver_auto": "Automatique",
-  "ui.space_mouse_driver_direct": "Direct (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Lecture directe du périphérique ; spacenavd n'est pas lancé",
-  "ui.space_mouse_driver_only_spacenavd": "Lecture via spacenavd, seule possibilité disponible",
-  "ui.space_mouse_forget": "Oublier le calibrage",
-  "ui.space_mouse_hint": "Déplace et fait pivoter la vue en même temps ; dans les esquisses, seuls le panoramique et le zoom sont utilisés.",
-  "ui.space_mouse_motion_rotation_x": "Rotation X",
-  "ui.space_mouse_motion_rotation_y": "Rotation Y",
-  "ui.space_mouse_motion_rotation_z": "Rotation Z",
-  "ui.space_mouse_motion_translation_x": "Translation X",
-  "ui.space_mouse_motion_translation_y": "Translation Y",
-  "ui.space_mouse_motion_translation_z": "Translation Z",
-  "ui.space_mouse_navigate": "Naviguer avec SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Aucune souris 3D trouvée",
-  "ui.space_mouse_not_calibrated": "Non calibrée",
-  "ui.space_mouse_reading": "Lecture",
-  "ui.space_mouse_reset_axes": "Réinitialiser l'attribution des axes",
-  "ui.space_mouse_step_lift": "Soulevez le capuchon, maintenez, puis relâchez.",
-  "ui.space_mouse_step_press": "Appuyez sur le capuchon, maintenez, puis relâchez.",
-  "ui.space_mouse_step_pull": "Tirez le capuchon vers vous, maintenez, puis relâchez.",
-  "ui.space_mouse_step_push": "Poussez le capuchon loin de vous, maintenez, puis relâchez.",
-  "ui.space_mouse_step_rest": "Lâchez le capuchon et laissez-le immobile.",
-  "ui.space_mouse_step_slide_left": "Glissez le capuchon vers la gauche, maintenez, puis relâchez.",
-  "ui.space_mouse_step_slide_right": "Glissez le capuchon vers la droite, maintenez, puis relâchez.",
-  "ui.space_mouse_step_tilt_back": "Inclinez le capuchon vers l'arrière (bord avant vers le haut), maintenez, puis relâchez.",
-  "ui.space_mouse_step_tilt_forward": "Inclinez le capuchon vers l'avant (bord avant vers le bas), maintenez, puis relâchez.",
-  "ui.space_mouse_step_tilt_left": "Inclinez le capuchon vers la gauche (bord gauche vers le bas), maintenez, puis relâchez.",
-  "ui.space_mouse_step_tilt_right": "Inclinez le capuchon vers la droite (bord droit vers le bas), maintenez, puis relâchez.",
-  "ui.space_mouse_step_twist_clockwise": "Tournez le capuchon dans le sens horaire, maintenez, puis relâchez.",
-  "ui.space_mouse_step_twist_counterclockwise": "Tournez le capuchon dans le sens antihoraire, maintenez, puis relâchez.",
-  "ui.space_mouse_view_axis": "Axe de la vue",
-  "ui.space_mouse_view_off": "Désactivé",
-  "ui.space_mouse_view_off_tip": "Le profil du pilote de la souris 3D désactive cet axe : son mouvement ne déplace pas la vue. Choisir ici le mouvement d'un autre axe les échange, et ce mouvement cesse de déplacer la vue.",
-  "ui.space_mouse_view_orbit_sideways": "Orbite gauche / droite",
-  "ui.space_mouse_view_orbit_up_down": "Orbite haut / bas",
-  "ui.space_mouse_view_pan_sideways": "Panoramique gauche / droite",
-  "ui.space_mouse_view_pan_up_down": "Panoramique haut / bas",
-  "ui.space_mouse_view_roll": "Roulis",
-  "ui.space_mouse_view_unmapped": "Axe {n}",
-  "ui.space_mouse_view_zoom": "Zoom",
   "ui.spacing": "Espacement",
   "ui.spacing_2": "Espacement 2",
   "ui.sphere": "Sphère",

assets/locales/gl.json

@@ -72,6 +72,7 @@
   "Choose…": "Escoller…",
   "Circular": "Circular",
   "Circumference": "Circunferencia",
+  "Clockwise": "Horario",
   "Close draft": "Pechar o borrador",
   "Collisions": "Colisións",
   "Colour": "Cor",
@@ -322,6 +323,7 @@
   "Search commands": "Buscar ordes",
   "Search this library": "Buscar nesta biblioteca",
   "Section": "Sección",
+  "Section position": "Posición da sección",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Seleccionar outro: mantén o botón esquerdo quieto sobre o modelo (ou clic dereito › Seleccionar outro…) para listar todo o que hai baixo o cursor; fai clic de novo no mesmo punto para seleccionar o seguinte. Fai dobre clic co botón central para ir ao Inicio (Preferencias › Navegación).",
   "Select bodies (a face picks its body)": "Selecciona corpos (unha cara escolle o seu corpo)",
   "Select bodies or faces instead": "Seleccionar corpos ou caras no seu lugar",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft pechouse antes de gardar estes deseños. Pódese abrir a súa última gravación automática.",
   "Specialise": "Especializar",
   "Speed": "Velocidade",
+  "Square": "Cadrado",
   "Stand it up": "Poñela de pé",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Poñela de pé: un cuarto de volta arredor de X, como unha operación Mover que podes desfacer.",
   "Stand this part up?": "Poñer esta peza de pé?",
+  "Start angle": "Ángulo inicial",
   "Start bulge": "Abaulamento inicial",
   "Start continuity": "Continuidade inicial",
   "Step": "Paso",
@@ -412,6 +416,7 @@
   "angle, height": "ángulo, altura",
   "appearance.dielectric_ior": "IOR dieléctrico",
   "appearance.metallic": "Metálico",
+  "appearance.only_available": "Só aparencias dispoñibles",
   "appearance.pbr_help": "Ve esta superficie en Render ou nun PNG de produto. Sen refracción nin transmisión.",
   "appearance.pbr_opaque": "PBR opaco",
   "appearance.roughness": "Rugosidade",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Inserir STEP",
   "cmd.file_save_mesh": "Gardar como malla",
   "cmd.file_slicers": "Laminadores instalados",
+  "cmd.frame_member": "Membro estrutural",
+  "cmd.frame_profile_insert": "Inserir perfil",
+  "cmd.frame_profile_list": "Biblioteca de perfís",
+  "cmd.frame_profile_properties": "Propiedades do perfil",
   "cmd.inspect_accessibility": "Análise de accesibilidade",
   "cmd.inspect_center_of_mass": "Centro de masas",
   "cmd.inspect_clearance": "Folga",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Material físico novo",
   "cmd.material_delete": "Eliminar o material físico",
   "cmd.material_edit": "Editar o material físico",
+  "cmd.material_inspect": "Inspeccionar o material físico",
   "cmd.material_list": "Listar os materiais",
   "cmd.material_properties_directional": "Módulo elástico direccional",
   "cmd.material_properties_validate": "Validar os datos do material físico",
@@ -1121,7 +1131,106 @@
   "trace.stopped_by_contact": "Remata na mostra {sample}: {a} atravesaría {b}",
   "trace.stopped_by_loop": "Remata na mostra {sample}: o bucle a través de {joint} non pode pecharse máis",
   "ui.1_degree_of_freedom": "1 grao de liberdade",
+  "ui.3d_mouse_axes_reassigned": "Os eixes están reasignados en Preferencias, e iso segue aplicándose sobre esta calibración.",
+  "ui.3d_mouse_button": "Botón {number}",
+  "ui.3d_mouse_button_nothing": "Nada",
+  "ui.3d_mouse_button_settings": "Axustes do rato 3D",
+  "ui.3d_mouse_buttons": "Botóns",
+  "ui.3d_mouse_buttons_hint": "Preme un botón do teu rato 3D para atopalo aquí e escolle que fai.",
+  "ui.3d_mouse_buttons_no_device": "Conecta un rato 3D para escoller que fan os seus botóns.",
+  "ui.3d_mouse_buttons_reset": "Restaurar os botóns predeterminados",
+  "ui.3d_mouse_calibrate": "Calibrar…",
+  "ui.3d_mouse_calibrate_tip": "Move o capuchón como pide a xanela para que SolidCraft aprenda cara a onde e ata onde vai cada eixe deste rato 3D. Gárdase para este rato 3D.",
+  "ui.3d_mouse_calibrate_title": "Calibrar o rato 3D",
+  "ui.3d_mouse_calibrate_wait": "Move o rato 3D unha vez para que SolidCraft o vexa.",
+  "ui.3d_mouse_calibrated": "Calibrado",
+  "ui.3d_mouse_calibration": "Calibración do rato 3D",
+  "ui.3d_mouse_calibration_done": "Feito. Gárdaa para usala sempre que este rato 3D estea conectado.",
+  "ui.3d_mouse_calibration_no_response": "Un eixe case non se moveu, así que non se pode calibrar. Volve comezar e move o capuchón máis lonxe cada vez.",
+  "ui.3d_mouse_circles_help": "Os círculos mostran o que envía o dispositivo tras a calibración. O modelo de proba mostra o que fai a vista con iso, tras a inversión, a velocidade e a asignación de eixes.",
+  "ui.3d_mouse_dead_zone": "Zona morta",
+  "ui.3d_mouse_dead_zone_tip": "Canto ten que moverse o capuchón antes de que se mova a vista, como parte do seu percorrido completo. Auméntaa se a vista se despraza co capuchón en repouso.",
+  "ui.3d_mouse_denied": "SolidCraft ve un rato 3D, pero non ten permiso para lelo. A regra udev está nas notas de configuración do rato 3D.",
+  "ui.3d_mouse_denied_short": "Atopado, pero non se pode ler",
+  "ui.3d_mouse_driven_by": "Que movemento calibrado do dispositivo controla este eixe. Se escolles un que xa usa outro eixe, intercámbianse.",
+  "ui.3d_mouse_driven_by_label": "controlado por",
+  "ui.3d_mouse_driver": "Controlador do rato 3D",
+  "ui.3d_mouse_driver_auto": "Automático",
+  "ui.3d_mouse_driver_direct": "Directo (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Lendo polo de agora a través de spacenavd: non se puido abrir o dispositivo.",
+  "ui.3d_mouse_driver_only_direct": "Lectura directa do dispositivo; spacenavd non está en execución",
+  "ui.3d_mouse_driver_only_spacenavd": "Lectura mediante spacenavd, a única opción dispoñible",
+  "ui.3d_mouse_forget": "Esquecer a calibración",
+  "ui.3d_mouse_ghost_left_viewport": "Vista esquerda",
+  "ui.3d_mouse_ghost_left_window": "Xanela esquerda",
+  "ui.3d_mouse_ghost_position": "Posición",
+  "ui.3d_mouse_ghost_right_viewport": "Vista dereita",
+  "ui.3d_mouse_hint": "Move e rota a vista á vez; os bosquexos só usan desprazamento e zoom.",
+  "ui.3d_mouse_kind_cap": "Retorno ao centro",
+  "ui.3d_mouse_kind_question": "Que tipo de rato 3D é?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "A lectura mantense mentres a suxeitas, como nun dispositivo de tipo «Retorno ao centro».",
+  "ui.3d_mouse_looks_like_trackball": "A lectura volve atrás en canto deixas de moverte, como nun trackball.",
+  "ui.3d_mouse_motion_rotation_x": "Rotación X",
+  "ui.3d_mouse_motion_rotation_y": "Rotación Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotación Z",
+  "ui.3d_mouse_motion_translation_x": "Translación X",
+  "ui.3d_mouse_motion_translation_y": "Translación Y",
+  "ui.3d_mouse_motion_translation_z": "Translación Z",
+  "ui.3d_mouse_navigate": "Navegar co rato 3D",
+  "ui.3d_mouse_none": "Non se atopou ningún rato 3D",
+  "ui.3d_mouse_not_calibrated": "Sen calibrar",
+  "ui.3d_mouse_offer": "Calibrar o teu rato 3D corrixe os eixes trocados ou invertidos e axusta a súa velocidade e sensación.",
+  "ui.3d_mouse_offer_never": "Non mostrar de novo",
+  "ui.3d_mouse_offer_swap": "Cambiar a Hidraw (controlador directo)",
+  "ui.3d_mouse_reading": "Lectura",
+  "ui.3d_mouse_reset_axes": "Restablecer asignación de eixes",
+  "ui.3d_mouse_reset_view": "Restablecer vista",
+  "ui.3d_mouse_restore": "Restaurar valores do rato 3D",
+  "ui.3d_mouse_restore_ask": "Volver aos valores predeterminados da configuración do rato 3D? A calibración e a asignación de botóns consérvanse.",
+  "ui.3d_mouse_section": "Rato 3D",
+  "ui.3d_mouse_show_in_view": "Mostrar o rato 3D na vista 3D",
+  "ui.3d_mouse_show_in_view_tip": "Unha imaxe do teu rato 3D na esquina inferior esquerda que se move cando o moves.",
+  "ui.3d_mouse_skip": "O meu dispositivo non fai isto",
+  "ui.3d_mouse_skip_tip": "Omite este movemento nos dous sentidos; a calibración déixao fóra.",
   "ui.3d_mouse_speed": "Velocidade do rato 3D",
+  "ui.3d_mouse_step_lift": "Levanta o capuchón, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_press": "Preme o capuchón cara abaixo, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_pull": "Tira do capuchón cara a ti, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_push": "Empurra o capuchón lonxe de ti, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_rest": "Solta o capuchón e déixao quieto.",
+  "ui.3d_mouse_step_rest_trackball": "Solta a bóla e déixaa quieta.",
+  "ui.3d_mouse_step_ring_clockwise": "Xira o anel de desprazamento uns clics no sentido horario.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Xira o anel de desprazamento uns clics no sentido antihorario.",
+  "ui.3d_mouse_step_roll_away": "Fai rodar a bóla lonxe de ti unhas cantas veces e déixaa parar.",
+  "ui.3d_mouse_step_roll_left": "Fai rodar a bóla á esquerda unhas cantas veces e déixaa parar.",
+  "ui.3d_mouse_step_roll_right": "Fai rodar a bóla á dereita unhas cantas veces e déixaa parar.",
+  "ui.3d_mouse_step_roll_toward": "Fai rodar a bóla cara a ti unhas cantas veces e déixaa parar.",
+  "ui.3d_mouse_step_slide_left": "Despraza o capuchón á esquerda, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_slide_right": "Despraza o capuchón á dereita, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_spin_clockwise": "Xira a bóla no sentido horario unhas cantas veces e déixaa parar.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Xira a bóla no sentido antihorario unhas cantas veces e déixaa parar.",
+  "ui.3d_mouse_step_tilt_away": "Inclina a parte de arriba do capuchón lonxe de ti (o bordo máis próximo sobe), mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_tilt_left": "Inclina o capuchón á esquerda (bordo esquerdo abaixo), mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_tilt_right": "Inclina o capuchón á dereita (bordo dereito abaixo), mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_tilt_toward": "Inclina a parte de arriba do capuchón cara a ti (o bordo máis próximo baixa), mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_touch": "Apoia a man no capuchón sen empurralo.",
+  "ui.3d_mouse_step_twist_clockwise": "Xira o capuchón no sentido horario, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Xira o capuchón no sentido antihorario, mantén a posición e despois sóltao.",
+  "ui.3d_mouse_switch_cap": "Calibrar como retorno ao centro",
+  "ui.3d_mouse_switch_trackball": "Calibrar como trackball",
+  "ui.3d_mouse_view_axis": "Eixe da vista",
+  "ui.3d_mouse_view_off": "Desactivado",
+  "ui.3d_mouse_view_off_tip": "O perfil do controlador do rato 3D desactiva este eixe, así que o seu movemento non move a vista. Se escolles aquí o movemento doutro eixe, intercámbianse e ese movemento deixa de mover a vista.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbitar á esquerda / dereita",
+  "ui.3d_mouse_view_orbit_up_down": "Orbitar arriba / abaixo",
+  "ui.3d_mouse_view_pan_sideways": "Desprazar á esquerda / dereita",
+  "ui.3d_mouse_view_pan_up_down": "Desprazar arriba / abaixo",
+  "ui.3d_mouse_view_roll": "Xirar sobre a vista",
+  "ui.3d_mouse_view_unmapped": "Eixe {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "Agardando movemento",
+  "ui.3d_mouse_wiggle": "Se tes un conectado, móveo un pouco.",
   "ui.3d_sketch": "Bosquexo 3D",
   "ui.activate": "Activar",
   "ui.active_component": "Compoñente activo",
@@ -1351,6 +1460,7 @@
   "ui.blocked": "Bloqueado",
   "ui.bodies": "Corpos",
   "ui.bodies_all_if_none": "Corpos (todos se non hai ningún)",
+  "ui.bottom": "Inferior",
   "ui.box": "Caixa",
   "ui.break": "Romper",
   "ui.browser_bodies_one": "{count} corpo",
@@ -1503,6 +1613,7 @@
   "ui.grid_follows_view_hint": "As vistas laterais mostran a grella no plano vertical que ten diante en vez do chan",
   "ui.ground_shadow": "Sombra no chan",
   "ui.groupSelected": "Agrupar a selección",
+  "ui.hatch": "Raiado",
   "ui.heading_add_ins": "COMPLEMENTOS",
   "ui.heading_assemble": "ENSAMBLAR",
   "ui.heading_box": "CAIXA",
@@ -1793,59 +1904,6 @@
   "ui.smooth_wheel_zoom": "Zoom suave coa roda",
   "ui.smooth_wheel_zoom_tip": "Desactívao para aplicar cada movemento da roda de inmediato, sen suavizado",
   "ui.snap": "Axuste",
-  "ui.space_mouse_axes_reassigned": "Os eixes están reasignados en Preferencias, e iso segue aplicándose sobre esta calibración.",
-  "ui.space_mouse_calibrate": "Calibrar…",
-  "ui.space_mouse_calibrate_tip": "Move o capuchón como pide a xanela para que SolidCraft aprenda cara a onde e ata onde vai cada eixe deste rato 3D. Gárdase para este rato 3D.",
-  "ui.space_mouse_calibrate_title": "Calibrar o rato 3D",
-  "ui.space_mouse_calibrated": "Calibrado",
-  "ui.space_mouse_calibration": "Calibración do rato 3D",
-  "ui.space_mouse_calibration_done": "Feito. Gárdaa para usala sempre que este rato 3D estea conectado.",
-  "ui.space_mouse_calibration_no_response": "Un eixe case non se moveu, así que non se pode calibrar. Volve comezar e move o capuchón máis lonxe cada vez.",
-  "ui.space_mouse_dead_zone": "Zona morta",
-  "ui.space_mouse_dead_zone_tip": "Canto ten que moverse o capuchón antes de que se mova a vista, como parte do seu percorrido completo. Auméntaa se a vista se despraza co capuchón en repouso.",
-  "ui.space_mouse_driven_by": "Que movemento calibrado do dispositivo controla este eixe. Se escolles un que xa usa outro eixe, intercámbianse.",
-  "ui.space_mouse_driven_by_label": "controlado por",
-  "ui.space_mouse_driver": "Controlador do rato 3D",
-  "ui.space_mouse_driver_auto": "Automático",
-  "ui.space_mouse_driver_direct": "Directo (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Lectura directa do dispositivo; spacenavd non está en execución",
-  "ui.space_mouse_driver_only_spacenavd": "Lectura mediante spacenavd, a única opción dispoñible",
-  "ui.space_mouse_forget": "Esquecer a calibración",
-  "ui.space_mouse_hint": "Move e rota a vista á vez; os bosquexos só usan desprazamento e zoom.",
-  "ui.space_mouse_motion_rotation_x": "Rotación X",
-  "ui.space_mouse_motion_rotation_y": "Rotación Y",
-  "ui.space_mouse_motion_rotation_z": "Rotación Z",
-  "ui.space_mouse_motion_translation_x": "Translación X",
-  "ui.space_mouse_motion_translation_y": "Translación Y",
-  "ui.space_mouse_motion_translation_z": "Translación Z",
-  "ui.space_mouse_navigate": "Navegar con SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Non se atopou ningún rato 3D",
-  "ui.space_mouse_not_calibrated": "Sen calibrar",
-  "ui.space_mouse_reading": "Lectura",
-  "ui.space_mouse_reset_axes": "Restablecer asignación de eixes",
-  "ui.space_mouse_step_lift": "Levanta o capuchón, mantéño e sóltao.",
-  "ui.space_mouse_step_press": "Preme o capuchón cara abaixo, mantéño e sóltao.",
-  "ui.space_mouse_step_pull": "Tira do capuchón cara a ti, mantéño e sóltao.",
-  "ui.space_mouse_step_push": "Empurra o capuchón lonxe de ti, mantéño e sóltao.",
-  "ui.space_mouse_step_rest": "Solta o capuchón e déixao quieto.",
-  "ui.space_mouse_step_slide_left": "Despraza o capuchón á esquerda, mantéño e sóltao.",
-  "ui.space_mouse_step_slide_right": "Despraza o capuchón á dereita, mantéño e sóltao.",
-  "ui.space_mouse_step_tilt_back": "Inclina o capuchón cara atrás (bordo dianteiro arriba), mantéño e sóltao.",
-  "ui.space_mouse_step_tilt_forward": "Inclina o capuchón cara adiante (bordo dianteiro abaixo), mantéño e sóltao.",
-  "ui.space_mouse_step_tilt_left": "Inclina o capuchón á esquerda (bordo esquerdo abaixo), mantéño e sóltao.",
-  "ui.space_mouse_step_tilt_right": "Inclina o capuchón á dereita (bordo dereito abaixo), mantéño e sóltao.",
-  "ui.space_mouse_step_twist_clockwise": "Xira o capuchón no sentido horario, mantéño e sóltao.",
-  "ui.space_mouse_step_twist_counterclockwise": "Xira o capuchón no sentido antihorario, mantéño e sóltao.",
-  "ui.space_mouse_view_axis": "Eixe da vista",
-  "ui.space_mouse_view_off": "Desactivado",
-  "ui.space_mouse_view_off_tip": "O perfil do controlador do rato 3D desactiva este eixe, así que o seu movemento non move a vista. Se escolles aquí o movemento doutro eixe, intercámbianse e ese movemento deixa de mover a vista.",
-  "ui.space_mouse_view_orbit_sideways": "Orbitar á esquerda / dereita",
-  "ui.space_mouse_view_orbit_up_down": "Orbitar arriba / abaixo",
-  "ui.space_mouse_view_pan_sideways": "Desprazar á esquerda / dereita",
-  "ui.space_mouse_view_pan_up_down": "Desprazar arriba / abaixo",
-  "ui.space_mouse_view_roll": "Xirar sobre a vista",
-  "ui.space_mouse_view_unmapped": "Eixe {n}",
-  "ui.space_mouse_view_zoom": "Zoom",
   "ui.spacing": "Espazado",
   "ui.spacing_2": "Espazado 2",
   "ui.sphere": "Esfera",

assets/locales/hu.json

@@ -72,6 +72,7 @@
   "Choose…": "Válasszon…",
   "Circular": "Kör alakú",
   "Circumference": "Kerület",
+  "Clockwise": "Óramutató járásával megegyező",
   "Close draft": "Vázlat bezárása",
   "Collisions": "Ütközések",
   "Colour": "Szín",
@@ -321,6 +322,7 @@
   "Search commands": "Parancsok keresése",
   "Search this library": "Keresés ebben a könyvtárban",
   "Section": "Metszet",
+  "Section position": "Szelvény helyzete",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Más kijelölése: tartsa nyomva a bal gombot egy helyen a modellen (vagy jobb kattintás › Más kijelölése…) a kurzor alatti elemek listázásához; kattintson újra ugyanarra a helyre a következő elem kijelöléséhez. A középső gomb dupla kattintása a kezdőnézetre vált (Beállítások › Navigáció).",
   "Select bodies (a face picks its body)": "Testek kijelölése (egy lap a testét jelöli ki)",
   "Select bodies or faces instead": "Inkább testek vagy lapok kijelölése",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "A SolidCraft bezárult, mielőtt ezek a tervek mentve lettek volna. Az utolsó automatikus mentésük megnyitható.",
   "Specialise": "Specializálás",
   "Speed": "Sebesség",
+  "Square": "Négyzet",
   "Stand it up": "Felállítás",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Felállítás: negyedfordulat az X körül, egyetlen visszavonható Mozgatás elemként.",
   "Stand this part up?": "Felállítja ezt az alkatrészt?",
+  "Start angle": "Kezdőszög",
   "Start bulge": "Kezdő ívelés",
   "Start continuity": "Kezdő folytonosság",
   "Step": "Lépés",
@@ -411,6 +415,7 @@
   "angle, height": "szög, magasság",
   "appearance.dielectric_ior": "Dielektromos törésmutató",
   "appearance.metallic": "Fémes",
+  "appearance.only_available": "Csak elérhető megjelenések",
   "appearance.pbr_help": "Tekintse meg ezt a felületet Renderelésben vagy termék-PNG-ben. Nincs fénytörés vagy áteresztés.",
   "appearance.pbr_opaque": "Átlátszatlan PBR",
   "appearance.roughness": "Érdesség",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "STEP beszúrása",
   "cmd.file_save_mesh": "Mentés hálóként",
   "cmd.file_slicers": "Telepített szeletelők",
+  "cmd.frame_member": "Szerkezeti elem",
+  "cmd.frame_profile_insert": "Profil beszúrása",
+  "cmd.frame_profile_list": "Profilkönyvtár",
+  "cmd.frame_profile_properties": "Profil tulajdonságai",
   "cmd.inspect_accessibility": "Hozzáférhetőség-elemzés",
   "cmd.inspect_center_of_mass": "Tömegközéppont",
   "cmd.inspect_clearance": "Hézag",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Új fizikai anyag",
   "cmd.material_delete": "Fizikai anyag törlése",
   "cmd.material_edit": "Fizikai anyag szerkesztése",
+  "cmd.material_inspect": "Fizikai anyag vizsgálata",
   "cmd.material_list": "Anyagok listázása",
   "cmd.material_properties_directional": "Irányfüggő rugalmassági modulus",
   "cmd.material_properties_validate": "Fizikai anyagadatok ellenőrzése",
@@ -1120,7 +1130,50 @@
   "trace.stopped_by_contact": "Vége a(z) {sample}. mintánál: {a} áthatolna ezen: {b}",
   "trace.stopped_by_loop": "Vége a(z) {sample}. mintánál: a(z) {joint} csuklón átmenő hurok nem zárható tovább",
   "ui.1_degree_of_freedom": "1 szabadságfok",
+  "ui.3d_mouse_calibrate": "Kalibrálás…",
+  "ui.3d_mouse_calibrate_tip": "Mozgassa a kupakot az ablak kérése szerint, hogy a SolidCraft megtanulja, merre és mennyire mozdul a 3D-egér mindegyik tengelye. Ehhez a 3D-egérhez mentve.",
+  "ui.3d_mouse_calibrate_title": "3D-egér kalibrálása",
+  "ui.3d_mouse_calibrate_wait": "Mozdítsa meg egyszer a 3D-egeret, hogy a SolidCraft lássa.",
+  "ui.3d_mouse_calibrated": "Kalibrálva",
+  "ui.3d_mouse_calibration": "3D-egér kalibrálása",
+  "ui.3d_mouse_calibration_done": "Kész. Mentse, hogy a 3D-egér csatlakoztatásakor mindig használatos legyen.",
+  "ui.3d_mouse_calibration_no_response": "Az egyik tengely alig mozdult, így nem kalibrálható. Kezdje elölről, és minden alkalommal mozgassa a kupakot messzebb.",
+  "ui.3d_mouse_circles_help": "A körök azt mutatják, mit küld az eszköz kalibrálás után. A tesztmodell azt mutatja, mit tesz ezzel a nézet a megfordítás, sebesség és tengelykiosztás után.",
+  "ui.3d_mouse_dead_zone": "Holtsáv",
+  "ui.3d_mouse_dead_zone_tip": "Mennyit kell mozdítani a kupakot, mielőtt a nézet mozdulna, a teljes elmozdulás arányában. Növelje, ha a nézet sodródik, miközben a kupak nyugalomban van.",
+  "ui.3d_mouse_denied": "A SolidCraft látja a 3D-egeret, de nem olvashatja. Az udev-szabályt a 3D-egér beállítási jegyzetei tartalmazzák.",
+  "ui.3d_mouse_denied_short": "Megvan, de nem olvasható",
+  "ui.3d_mouse_driver_fallback": "Egyelőre a spacenavd-n át olvassa: magát az eszközt nem sikerült megnyitni.",
+  "ui.3d_mouse_forget": "Kalibrálás elfelejtése",
+  "ui.3d_mouse_ghost_left_viewport": "Bal nézet",
+  "ui.3d_mouse_ghost_left_window": "Bal ablak",
+  "ui.3d_mouse_ghost_position": "Helyzet",
+  "ui.3d_mouse_ghost_right_viewport": "Jobb nézet",
+  "ui.3d_mouse_hint": "A nézetet együtt mozgatja és forgatja; a vázlatok csak pásztázást és nagyítást használnak.",
+  "ui.3d_mouse_navigate": "Navigálás a 3D-egérrel",
+  "ui.3d_mouse_none": "Nem található 3D-egér",
+  "ui.3d_mouse_not_calibrated": "Nincs kalibrálva",
+  "ui.3d_mouse_offer": "A 3D-egér kalibrálása kijavítja a felcserélt vagy megfordított tengelyeket, és beállítja a sebességét és az érzetét.",
+  "ui.3d_mouse_offer_never": "Ne jelenjen meg többé",
+  "ui.3d_mouse_offer_swap": "Váltás Hidrawra (közvetlen illesztőprogram)",
+  "ui.3d_mouse_reading": "Beolvasás",
+  "ui.3d_mouse_reset_view": "Nézet alaphelyzetbe állítása",
+  "ui.3d_mouse_restore": "3D-egér alapértékeinek visszaállítása",
+  "ui.3d_mouse_restore_ask": "Visszaállítja a 3D-egér beállításait az alapértékekre? A kalibrálás és a gombkiosztás megmarad.",
   "ui.3d_mouse_speed": "3D-egér sebessége",
+  "ui.3d_mouse_step_lift": "Emelje fel a kupakot, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_press": "Nyomja le a kupakot, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_pull": "Húzza a kupakot maga felé, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_push": "Tolja a kupakot magától el, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_rest": "Vegye le a kezét a kupakról, és hagyja nyugodtan.",
+  "ui.3d_mouse_step_slide_left": "Csúsztassa a kupakot balra, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_slide_right": "Csúsztassa a kupakot jobbra, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_tilt_left": "Billentse balra a kupakot (a bal él lefelé), tartsa, majd engedje el.",
+  "ui.3d_mouse_step_tilt_right": "Billentse jobbra a kupakot (a jobb él lefelé), tartsa, majd engedje el.",
+  "ui.3d_mouse_step_twist_clockwise": "Csavarja el a kupakot az óramutató járásával megegyezően, tartsa, majd engedje el.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Csavarja el a kupakot az óramutató járásával ellentétesen, tartsa, majd engedje el.",
+  "ui.3d_mouse_waiting": "Mozgásra vár",
+  "ui.3d_mouse_wiggle": "Ha van csatlakoztatva egy, mozgassa meg egy kicsit.",
   "ui.3d_sketch": "3D vázlat",
   "ui.activate": "Aktiválás",
   "ui.active_component": "Aktív komponens",
@@ -1502,6 +1555,7 @@
   "ui.grid_follows_view_hint": "Az oldalnézetek a talaj helyett a feléjük néző függőleges síkon mutatják a rácsot",
   "ui.ground_shadow": "Talajárnyék",
   "ui.groupSelected": "Kijelöltek csoportosítása",
+  "ui.hatch": "Sraffozás",
   "ui.heading_add_ins": "BŐVÍTMÉNYEK",
   "ui.heading_assemble": "ÖSSZESZERELÉS",
   "ui.heading_box": "DOBOZ",
@@ -1792,34 +1846,6 @@
   "ui.smooth_wheel_zoom": "Sima görgőnagyítás",
   "ui.smooth_wheel_zoom_tip": "Kapcsolja ki az egyes görgőesemények azonnali alkalmazásához, kifutás nélkül",
   "ui.snap": "Illesztés",
-  "ui.space_mouse_calibrate": "Kalibrálás…",
-  "ui.space_mouse_calibrate_tip": "Mozgassa a kupakot az ablak kérése szerint, hogy a SolidCraft megtanulja, merre és mennyire mozdul a 3D-egér mindegyik tengelye. Ehhez a 3D-egérhez mentve.",
-  "ui.space_mouse_calibrate_title": "3D-egér kalibrálása",
-  "ui.space_mouse_calibrated": "Kalibrálva",
-  "ui.space_mouse_calibration": "3D-egér kalibrálása",
-  "ui.space_mouse_calibration_done": "Kész. Mentse, hogy a 3D-egér csatlakoztatásakor mindig használatos legyen.",
-  "ui.space_mouse_calibration_no_response": "Az egyik tengely alig mozdult, így nem kalibrálható. Kezdje elölről, és minden alkalommal mozgassa a kupakot messzebb.",
-  "ui.space_mouse_dead_zone": "Holtsáv",
-  "ui.space_mouse_dead_zone_tip": "Mennyit kell mozdítani a kupakot, mielőtt a nézet mozdulna, a teljes elmozdulás arányában. Növelje, ha a nézet sodródik, miközben a kupak nyugalomban van.",
-  "ui.space_mouse_forget": "Kalibrálás elfelejtése",
-  "ui.space_mouse_hint": "A nézetet együtt mozgatja és forgatja; a vázlatok csak pásztázást és nagyítást használnak.",
-  "ui.space_mouse_navigate": "Navigálás SpaceNavigator / SpaceMouse eszközzel",
-  "ui.space_mouse_none": "Nem található 3D-egér",
-  "ui.space_mouse_not_calibrated": "Nincs kalibrálva",
-  "ui.space_mouse_reading": "Beolvasás",
-  "ui.space_mouse_step_lift": "Emelje fel a kupakot, tartsa, majd engedje el.",
-  "ui.space_mouse_step_press": "Nyomja le a kupakot, tartsa, majd engedje el.",
-  "ui.space_mouse_step_pull": "Húzza a kupakot maga felé, tartsa, majd engedje el.",
-  "ui.space_mouse_step_push": "Tolja a kupakot magától el, tartsa, majd engedje el.",
-  "ui.space_mouse_step_rest": "Vegye le a kezét a kupakról, és hagyja nyugodtan.",
-  "ui.space_mouse_step_slide_left": "Csúsztassa a kupakot balra, tartsa, majd engedje el.",
-  "ui.space_mouse_step_slide_right": "Csúsztassa a kupakot jobbra, tartsa, majd engedje el.",
-  "ui.space_mouse_step_tilt_back": "Billentse hátra a kupakot (az elülső él felfelé), tartsa, majd engedje el.",
-  "ui.space_mouse_step_tilt_forward": "Billentse előre a kupakot (az elülső él lefelé), tartsa, majd engedje el.",
-  "ui.space_mouse_step_tilt_left": "Billentse balra a kupakot (a bal él lefelé), tartsa, majd engedje el.",
-  "ui.space_mouse_step_tilt_right": "Billentse jobbra a kupakot (a jobb él lefelé), tartsa, majd engedje el.",
-  "ui.space_mouse_step_twist_clockwise": "Csavarja el a kupakot az óramutató járásával megegyezően, tartsa, majd engedje el.",
-  "ui.space_mouse_step_twist_counterclockwise": "Csavarja el a kupakot az óramutató járásával ellentétesen, tartsa, majd engedje el.",
   "ui.spacing": "Térköz",
   "ui.spacing_2": "2. térköz",
   "ui.sphere": "Gömb",

assets/locales/id.json

@@ -72,6 +72,7 @@
   "Choose…": "Pilih…",
   "Circular": "Melingkar",
   "Circumference": "Keliling",
+  "Clockwise": "Searah jarum jam",
   "Close draft": "Tutup draf",
   "Collisions": "Tabrakan",
   "Colour": "Warna",
@@ -321,6 +322,7 @@
   "Search commands": "Cari perintah",
   "Search this library": "Cari di pustaka ini",
   "Section": "Penampang",
+  "Section position": "Posisi penampang",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Select Other: tahan tombol kiri diam di model (atau klik kanan › Select Other…) untuk mendaftar semua yang ada di bawah kursor; klik lagi di titik yang sama untuk memilih benda berikutnya. Klik dua kali tombol tengah untuk ke Home (Preferensi › Navigasi).",
   "Select bodies (a face picks its body)": "Pilih bodi (memilih muka berarti memilih bodinya)",
   "Select bodies or faces instead": "Pilih bodi atau muka saja",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft tertutup sebelum desain ini disimpan. Simpan otomatis terakhirnya dapat dibuka.",
   "Specialise": "Spesialisasikan",
   "Speed": "Kecepatan",
+  "Square": "Persegi",
   "Stand it up": "Tegakkan",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Tegakkan: putaran seperempat terhadap X, sebagai satu fitur Move yang dapat dibatalkan.",
   "Stand this part up?": "Tegakkan part ini?",
+  "Start angle": "Sudut awal",
   "Start bulge": "Bulge awal",
   "Start continuity": "Kontinuitas awal",
   "Step": "Langkah",
@@ -411,6 +415,7 @@
   "angle, height": "sudut, tinggi",
   "appearance.dielectric_ior": "IOR Dielektrik",
   "appearance.metallic": "Metalik",
+  "appearance.only_available": "Hanya tampilan yang tersedia",
   "appearance.pbr_help": "Lihat permukaan ini di Render atau PNG produk. Tanpa refraksi atau transmisi.",
   "appearance.pbr_opaque": "PBR Opak",
   "appearance.roughness": "Kekasaran",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "Sisipkan STEP",
   "cmd.file_save_mesh": "Simpan Sebagai Mesh",
   "cmd.file_slicers": "Slicer Terpasang",
+  "cmd.frame_member": "Batang Rangka",
+  "cmd.frame_profile_insert": "Sisipkan Profil",
+  "cmd.frame_profile_list": "Pustaka Profil",
+  "cmd.frame_profile_properties": "Properti Profil",
   "cmd.inspect_accessibility": "Analisis Aksesibilitas",
   "cmd.inspect_center_of_mass": "Pusat Massa",
   "cmd.inspect_clearance": "Kelonggaran",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Material Fisik Baru",
   "cmd.material_delete": "Hapus Material Fisik",
   "cmd.material_edit": "Edit Material Fisik",
+  "cmd.material_inspect": "Periksa Material Fisik",
   "cmd.material_list": "Daftar Material",
   "cmd.material_properties_directional": "Modulus Elastis Arah",
   "cmd.material_properties_validate": "Validasi Data Material Fisik",
@@ -1120,7 +1130,50 @@
   "trace.stopped_by_contact": "Berakhir di sampel {sample}: {a} akan menembus {b}",
   "trace.stopped_by_loop": "Berakhir di sampel {sample}: loop melalui {joint} tidak dapat menutup lebih jauh",
   "ui.1_degree_of_freedom": "1 derajat kebebasan",
+  "ui.3d_mouse_calibrate": "Kalibrasi…",
+  "ui.3d_mouse_calibrate_tip": "Gerakkan cap sesuai permintaan jendela, agar SolidCraft mempelajari arah dan jarak setiap sumbu mouse 3D ini. Disimpan untuk mouse 3D ini.",
+  "ui.3d_mouse_calibrate_title": "Kalibrasi mouse 3D",
+  "ui.3d_mouse_calibrate_wait": "Gerakkan mouse 3D sekali agar SolidCraft dapat melihatnya.",
+  "ui.3d_mouse_calibrated": "Terkalibrasi",
+  "ui.3d_mouse_calibration": "Kalibrasi mouse 3D",
+  "ui.3d_mouse_calibration_done": "Selesai. Simpan untuk dipakai setiap kali mouse 3D ini terhubung.",
+  "ui.3d_mouse_calibration_no_response": "Satu sumbu hampir tidak bergerak, sehingga tidak dapat dikalibrasi. Mulai ulang dan gerakkan cap lebih jauh setiap kali.",
+  "ui.3d_mouse_circles_help": "Lingkaran menunjukkan apa yang dikirim perangkat setelah kalibrasi. Model uji menunjukkan apa yang dilakukan tampilan dengannya, setelah pembalikan, kecepatan, dan penetapan sumbu.",
+  "ui.3d_mouse_dead_zone": "Zona mati",
+  "ui.3d_mouse_dead_zone_tip": "Seberapa jauh cap harus bergerak sebelum tampilan bergerak, sebagai bagian dari total jangkauannya. Naikkan jika tampilan bergeser saat cap diam.",
+  "ui.3d_mouse_denied": "SolidCraft melihat mouse 3D tetapi tidak diizinkan membacanya. Lihat catatan penyiapan mouse 3D untuk aturan udev.",
+  "ui.3d_mouse_denied_short": "Ditemukan, tetapi tidak bisa dibaca",
+  "ui.3d_mouse_driver_fallback": "Sementara dibaca lewat spacenavd: perangkatnya sendiri tidak dapat dibuka.",
+  "ui.3d_mouse_forget": "Lupakan kalibrasi",
+  "ui.3d_mouse_ghost_left_viewport": "Viewport kiri",
+  "ui.3d_mouse_ghost_left_window": "Jendela kiri",
+  "ui.3d_mouse_ghost_position": "Posisi",
+  "ui.3d_mouse_ghost_right_viewport": "Viewport kanan",
+  "ui.3d_mouse_hint": "Gerakkan dan putar tampilan bersama; sketsa hanya memakai pan dan zoom.",
+  "ui.3d_mouse_navigate": "Navigasi dengan mouse 3D",
+  "ui.3d_mouse_none": "Mouse 3D tidak ditemukan",
+  "ui.3d_mouse_not_calibrated": "Belum dikalibrasi",
+  "ui.3d_mouse_offer": "Mengkalibrasi mouse 3D memperbaiki sumbu yang tertukar atau terbalik dan mengatur kecepatan serta rasanya.",
+  "ui.3d_mouse_offer_never": "Jangan tampilkan lagi",
+  "ui.3d_mouse_offer_swap": "Beralih ke Hidraw (driver langsung)",
+  "ui.3d_mouse_reading": "Pembacaan",
+  "ui.3d_mouse_reset_view": "Atur ulang tampilan",
+  "ui.3d_mouse_restore": "Pulihkan bawaan mouse 3D",
+  "ui.3d_mouse_restore_ask": "Kembalikan pengaturan mouse 3D ke bawaan? Kalibrasi dan pemetaan tombol tetap ada.",
   "ui.3d_mouse_speed": "Kecepatan mouse 3D",
+  "ui.3d_mouse_step_lift": "Angkat cap ke atas, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_press": "Tekan cap ke bawah, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_pull": "Tarik cap ke arah Anda, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_push": "Dorong cap menjauh dari Anda, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_rest": "Lepaskan tangan dari cap dan biarkan diam.",
+  "ui.3d_mouse_step_slide_left": "Geser cap ke kiri, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_slide_right": "Geser cap ke kanan, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_tilt_left": "Miringkan cap ke kiri (tepi kiri turun), tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_tilt_right": "Miringkan cap ke kanan (tepi kanan turun), tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_twist_clockwise": "Putar cap searah jarum jam, tahan, lalu lepaskan.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Putar cap berlawanan arah jarum jam, tahan, lalu lepaskan.",
+  "ui.3d_mouse_waiting": "Menunggu gerakan",
+  "ui.3d_mouse_wiggle": "Jika Anda memasang satu, goyangkan sedikit.",
   "ui.3d_sketch": "Sketsa 3D",
   "ui.activate": "Aktifkan",
   "ui.active_component": "Komponen aktif",
@@ -1502,6 +1555,7 @@
   "ui.grid_follows_view_hint": "Tampilan samping menampilkan grid pada bidang tegak yang menghadapnya, bukan pada dasar",
   "ui.ground_shadow": "Bayangan dasar",
   "ui.groupSelected": "Kelompokkan yang Dipilih",
+  "ui.hatch": "Arsir",
   "ui.heading_add_ins": "ADD-IN",
   "ui.heading_assemble": "RAKIT",
   "ui.heading_box": "KOTAK",
@@ -1792,34 +1846,6 @@
   "ui.smooth_wheel_zoom": "Zoom roda halus",
   "ui.smooth_wheel_zoom_tip": "Matikan untuk menerapkan setiap peristiwa roda segera, tanpa ekor penghalusan",
   "ui.snap": "Snap",
-  "ui.space_mouse_calibrate": "Kalibrasi…",
-  "ui.space_mouse_calibrate_tip": "Gerakkan cap sesuai permintaan jendela, agar SolidCraft mempelajari arah dan jarak setiap sumbu mouse 3D ini. Disimpan untuk mouse 3D ini.",
-  "ui.space_mouse_calibrate_title": "Kalibrasi mouse 3D",
-  "ui.space_mouse_calibrated": "Terkalibrasi",
-  "ui.space_mouse_calibration": "Kalibrasi mouse 3D",
-  "ui.space_mouse_calibration_done": "Selesai. Simpan untuk dipakai setiap kali mouse 3D ini terhubung.",
-  "ui.space_mouse_calibration_no_response": "Satu sumbu hampir tidak bergerak, sehingga tidak dapat dikalibrasi. Mulai ulang dan gerakkan cap lebih jauh setiap kali.",
-  "ui.space_mouse_dead_zone": "Zona mati",
-  "ui.space_mouse_dead_zone_tip": "Seberapa jauh cap harus bergerak sebelum tampilan bergerak, sebagai bagian dari total jangkauannya. Naikkan jika tampilan bergeser saat cap diam.",
-  "ui.space_mouse_forget": "Lupakan kalibrasi",
-  "ui.space_mouse_hint": "Gerakkan dan putar tampilan bersama; sketsa hanya memakai pan dan zoom.",
-  "ui.space_mouse_navigate": "Navigasi dengan SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Mouse 3D tidak ditemukan",
-  "ui.space_mouse_not_calibrated": "Belum dikalibrasi",
-  "ui.space_mouse_reading": "Pembacaan",
-  "ui.space_mouse_step_lift": "Angkat cap ke atas, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_press": "Tekan cap ke bawah, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_pull": "Tarik cap ke arah Anda, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_push": "Dorong cap menjauh dari Anda, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_rest": "Lepaskan tangan dari cap dan biarkan diam.",
-  "ui.space_mouse_step_slide_left": "Geser cap ke kiri, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_slide_right": "Geser cap ke kanan, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_tilt_back": "Miringkan cap ke belakang (tepi depan naik), tahan, lalu lepaskan.",
-  "ui.space_mouse_step_tilt_forward": "Miringkan cap ke depan (tepi depan turun), tahan, lalu lepaskan.",
-  "ui.space_mouse_step_tilt_left": "Miringkan cap ke kiri (tepi kiri turun), tahan, lalu lepaskan.",
-  "ui.space_mouse_step_tilt_right": "Miringkan cap ke kanan (tepi kanan turun), tahan, lalu lepaskan.",
-  "ui.space_mouse_step_twist_clockwise": "Putar cap searah jarum jam, tahan, lalu lepaskan.",
-  "ui.space_mouse_step_twist_counterclockwise": "Putar cap berlawanan arah jarum jam, tahan, lalu lepaskan.",
   "ui.spacing": "Jarak antar",
   "ui.spacing_2": "Jarak antar 2",
   "ui.sphere": "Bola",

assets/locales/it.json

@@ -72,6 +72,7 @@
   "Choose…": "Scegli…",
   "Circular": "Circolare",
   "Circumference": "Circonferenza",
+  "Clockwise": "Orario",
   "Close draft": "Chiudi bozza",
   "Collisions": "Collisioni",
   "Colour": "Colore",
@@ -325,6 +326,7 @@
   "Search commands": "Cerca comandi",
   "Search this library": "Cerca in questa libreria",
   "Section": "Sezione",
+  "Section position": "Posizione della sezione",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Seleziona altro: tieni premuto il pulsante sinistro senza muovere il puntatore sul modello (o fai clic destro › Seleziona altro…) per elencare gli oggetti sotto il cursore; fai di nuovo clic nello stesso punto per selezionare l'oggetto successivo. Fai doppio clic con il pulsante centrale per tornare alla vista iniziale (Preferenze › Navigazione).",
   "Select bodies (a face picks its body)": "Seleziona corpi (una faccia seleziona il corpo a cui appartiene)",
   "Select bodies or faces instead": "Seleziona invece corpi o facce",
@@ -348,9 +350,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft si è chiuso prima del salvataggio di questi progetti. È possibile aprire il loro ultimo salvataggio automatico.",
   "Specialise": "Specializza",
   "Speed": "Velocità",
+  "Square": "Quadrato",
   "Stand it up": "Raddrizza",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Raddrizza: un quarto di giro attorno a X, come singola lavorazione Sposta annullabile.",
   "Stand this part up?": "Raddrizzare questa parte?",
+  "Start angle": "Angolo iniziale",
   "Start bulge": "Rigonfiamento iniziale",
   "Start continuity": "Continuità iniziale",
   "Step": "Passo",
@@ -415,6 +419,7 @@
   "angle, height": "angolo, altezza",
   "appearance.dielectric_ior": "Indice di rifrazione dielettrico",
   "appearance.metallic": "Metallicità",
+  "appearance.only_available": "Solo aspetti disponibili",
   "appearance.pbr_help": "Visualizza questa superficie in Rendering o in un PNG del prodotto. Senza rifrazione né trasmissione.",
   "appearance.pbr_opaque": "PBR opaco",
   "appearance.roughness": "Rugosità",
@@ -533,6 +538,10 @@
   "cmd.file_insert_step": "Inserisci STEP",
   "cmd.file_save_mesh": "Salva come mesh",
   "cmd.file_slicers": "Slicer installati",
+  "cmd.frame_member": "Membro strutturale",
+  "cmd.frame_profile_insert": "Inserisci profilo",
+  "cmd.frame_profile_list": "Libreria profili",
+  "cmd.frame_profile_properties": "Proprietà del profilo",
   "cmd.inspect_accessibility": "Analisi di accessibilità",
   "cmd.inspect_center_of_mass": "Centro di massa",
   "cmd.inspect_clearance": "Distanza libera",
@@ -572,6 +581,7 @@
   "cmd.material_create": "Nuovo materiale fisico",
   "cmd.material_delete": "Elimina materiale fisico",
   "cmd.material_edit": "Modifica materiale fisico",
+  "cmd.material_inspect": "Ispeziona materiale fisico",
   "cmd.material_list": "Elenca materiali",
   "cmd.material_properties_directional": "Modulo elastico direzionale",
   "cmd.material_properties_validate": "Convalida dati del materiale fisico",
@@ -1124,7 +1134,106 @@
   "trace.stopped_by_contact": "Termina al campione {sample}: {a} attraverserebbe {b}",
   "trace.stopped_by_loop": "Termina al campione {sample}: la catena chiusa che passa per {joint} non può chiudersi ulteriormente",
   "ui.1_degree_of_freedom": "1 grado di libertà",
+  "ui.3d_mouse_axes_reassigned": "Gli assi sono riassegnati nelle Preferenze, e questo vale anche dopo questa calibrazione.",
+  "ui.3d_mouse_button": "Pulsante {number}",
+  "ui.3d_mouse_button_nothing": "Niente",
+  "ui.3d_mouse_button_settings": "Impostazioni del mouse 3D",
+  "ui.3d_mouse_buttons": "Pulsanti",
+  "ui.3d_mouse_buttons_hint": "Premi un pulsante del tuo mouse 3D per trovarlo qui, poi scegli cosa fa.",
+  "ui.3d_mouse_buttons_no_device": "Collega un mouse 3D per scegliere cosa fanno i suoi pulsanti.",
+  "ui.3d_mouse_buttons_reset": "Ripristina i pulsanti predefiniti",
+  "ui.3d_mouse_calibrate": "Calibra…",
+  "ui.3d_mouse_calibrate_tip": "Muovi la manopola come chiede la finestra, così SolidCraft impara in che direzione e quanto va ogni asse di questo mouse 3D. Viene salvata per questo mouse 3D.",
+  "ui.3d_mouse_calibrate_title": "Calibra mouse 3D",
+  "ui.3d_mouse_calibrate_wait": "Muovi il mouse 3D una volta così SolidCraft lo vede.",
+  "ui.3d_mouse_calibrated": "Calibrato",
+  "ui.3d_mouse_calibration": "Calibrazione del mouse 3D",
+  "ui.3d_mouse_calibration_done": "Fatto. Salvala per usarla ogni volta che questo mouse 3D è collegato.",
+  "ui.3d_mouse_calibration_no_response": "Un asse si è mosso appena, quindi non si può calibrare. Ricomincia e muovi la manopola più a fondo ogni volta.",
+  "ui.3d_mouse_circles_help": "I cerchi mostrano ciò che il dispositivo invia dopo la calibrazione. Il modello di prova mostra cosa ne fa la vista, dopo inversione, velocità e assegnazione degli assi.",
+  "ui.3d_mouse_dead_zone": "Zona morta",
+  "ui.3d_mouse_dead_zone_tip": "Quanto deve muoversi la manopola prima che si muova la vista, come quota della sua corsa completa. Aumentala se la vista si sposta con la manopola a riposo.",
+  "ui.3d_mouse_denied": "SolidCraft vede un mouse 3D ma non ha il permesso di leggerlo. La regola udev è nelle note di configurazione del mouse 3D.",
+  "ui.3d_mouse_denied_short": "Trovato, ma non leggibile",
+  "ui.3d_mouse_driven_by": "Quale movimento calibrato del dispositivo comanda questo asse. Se ne scegli uno già usato da un altro asse, i due si scambiano.",
+  "ui.3d_mouse_driven_by_label": "comandato da",
+  "ui.3d_mouse_driver": "Driver del mouse 3D",
+  "ui.3d_mouse_driver_auto": "Automatico",
+  "ui.3d_mouse_driver_direct": "Diretto (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Per ora legge tramite spacenavd: il dispositivo stesso non si è potuto aprire.",
+  "ui.3d_mouse_driver_only_direct": "Lettura diretta del dispositivo; spacenavd non è in esecuzione",
+  "ui.3d_mouse_driver_only_spacenavd": "Lettura tramite spacenavd, l'unica possibilità disponibile",
+  "ui.3d_mouse_forget": "Dimentica calibrazione",
+  "ui.3d_mouse_ghost_left_viewport": "Vista a sinistra",
+  "ui.3d_mouse_ghost_left_window": "Finestra a sinistra",
+  "ui.3d_mouse_ghost_position": "Posizione",
+  "ui.3d_mouse_ghost_right_viewport": "Vista a destra",
+  "ui.3d_mouse_hint": "Sposta e ruota la vista insieme; gli schizzi usano solo panoramica e zoom.",
+  "ui.3d_mouse_kind_cap": "Ritorno al centro",
+  "ui.3d_mouse_kind_question": "Che tipo di mouse 3D è?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "Il valore resta finché tieni, come in un dispositivo di tipo «Ritorno al centro».",
+  "ui.3d_mouse_looks_like_trackball": "Il valore torna indietro appena smetti di muovere, come in una trackball.",
+  "ui.3d_mouse_motion_rotation_x": "Rotazione X",
+  "ui.3d_mouse_motion_rotation_y": "Rotazione Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotazione Z",
+  "ui.3d_mouse_motion_translation_x": "Traslazione X",
+  "ui.3d_mouse_motion_translation_y": "Traslazione Y",
+  "ui.3d_mouse_motion_translation_z": "Traslazione Z",
+  "ui.3d_mouse_navigate": "Naviga con il mouse 3D",
+  "ui.3d_mouse_none": "Nessun mouse 3D trovato",
+  "ui.3d_mouse_not_calibrated": "Non calibrato",
+  "ui.3d_mouse_offer": "Calibrare il mouse 3D corregge gli assi scambiati o invertiti e imposta velocità e sensibilità.",
+  "ui.3d_mouse_offer_never": "Non mostrare più",
+  "ui.3d_mouse_offer_swap": "Passa a Hidraw (driver diretto)",
+  "ui.3d_mouse_reading": "Lettura",
+  "ui.3d_mouse_reset_axes": "Ripristina assegnazione assi",
+  "ui.3d_mouse_reset_view": "Ripristina vista",
+  "ui.3d_mouse_restore": "Ripristina impostazioni mouse 3D",
+  "ui.3d_mouse_restore_ask": "Riportare le impostazioni del mouse 3D ai valori predefiniti? Calibrazione e assegnazione dei pulsanti restano.",
+  "ui.3d_mouse_section": "Mouse 3D",
+  "ui.3d_mouse_show_in_view": "Mostra il mouse 3D nella vista 3D",
+  "ui.3d_mouse_show_in_view_tip": "Un'immagine del tuo mouse 3D nell'angolo in basso a sinistra, che si muove quando lo muovi.",
+  "ui.3d_mouse_skip": "Il mio dispositivo non può farlo",
+  "ui.3d_mouse_skip_tip": "Salta questo movimento in entrambi i versi; la calibrazione lo esclude.",
   "ui.3d_mouse_speed": "Velocità del mouse 3D",
+  "ui.3d_mouse_step_lift": "Solleva la manopola, tienila, poi lasciala.",
+  "ui.3d_mouse_step_press": "Premi la manopola verso il basso, tienila, poi lasciala.",
+  "ui.3d_mouse_step_pull": "Tira la manopola verso di te, tienila, poi lasciala.",
+  "ui.3d_mouse_step_push": "Spingi la manopola lontano da te, tienila, poi lasciala.",
+  "ui.3d_mouse_step_rest": "Togli la mano dalla manopola e lasciala ferma.",
+  "ui.3d_mouse_step_rest_trackball": "Togli la mano dalla sfera e lasciala ferma.",
+  "ui.3d_mouse_step_ring_clockwise": "Gira la ghiera di scorrimento di qualche scatto in senso orario.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Gira la ghiera di scorrimento di qualche scatto in senso antiorario.",
+  "ui.3d_mouse_step_roll_away": "Fai rotolare la sfera lontano da te qualche volta, poi lasciala fermare.",
+  "ui.3d_mouse_step_roll_left": "Fai rotolare la sfera verso sinistra qualche volta, poi lasciala fermare.",
+  "ui.3d_mouse_step_roll_right": "Fai rotolare la sfera verso destra qualche volta, poi lasciala fermare.",
+  "ui.3d_mouse_step_roll_toward": "Fai rotolare la sfera verso di te qualche volta, poi lasciala fermare.",
+  "ui.3d_mouse_step_slide_left": "Fai scorrere la manopola a sinistra, tienila, poi lasciala.",
+  "ui.3d_mouse_step_slide_right": "Fai scorrere la manopola a destra, tienila, poi lasciala.",
+  "ui.3d_mouse_step_spin_clockwise": "Ruota la sfera in senso orario qualche volta, poi lasciala fermare.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Ruota la sfera in senso antiorario qualche volta, poi lasciala fermare.",
+  "ui.3d_mouse_step_tilt_away": "Inclina la parte superiore della manopola lontano da te (il bordo più vicino sale), tienila, poi lasciala.",
+  "ui.3d_mouse_step_tilt_left": "Inclina la manopola a sinistra (bordo sinistro in basso), tienila, poi lasciala.",
+  "ui.3d_mouse_step_tilt_right": "Inclina la manopola a destra (bordo destro in basso), tienila, poi lasciala.",
+  "ui.3d_mouse_step_tilt_toward": "Inclina la parte superiore della manopola verso di te (il bordo più vicino scende), tienila, poi lasciala.",
+  "ui.3d_mouse_step_touch": "Appoggia la mano sulla manopola senza spingerla.",
+  "ui.3d_mouse_step_twist_clockwise": "Ruota la manopola in senso orario, tienila, poi lasciala.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Ruota la manopola in senso antiorario, tienila, poi lasciala.",
+  "ui.3d_mouse_switch_cap": "Calibra come ritorno al centro",
+  "ui.3d_mouse_switch_trackball": "Calibra come trackball",
+  "ui.3d_mouse_view_axis": "Asse della vista",
+  "ui.3d_mouse_view_off": "Disattivato",
+  "ui.3d_mouse_view_off_tip": "Il profilo del driver del mouse 3D disattiva questo asse, quindi il suo movimento non muove la vista. Se qui scegli il movimento di un altro asse, i due si scambiano e quel movimento smette di muovere la vista.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbita sinistra / destra",
+  "ui.3d_mouse_view_orbit_up_down": "Orbita su / giù",
+  "ui.3d_mouse_view_pan_sideways": "Panoramica sinistra / destra",
+  "ui.3d_mouse_view_pan_up_down": "Panoramica su / giù",
+  "ui.3d_mouse_view_roll": "Rollio",
+  "ui.3d_mouse_view_unmapped": "Asse {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "In attesa di movimento",
+  "ui.3d_mouse_wiggle": "Se ne hai uno collegato, muovilo un po'.",
   "ui.3d_sketch": "Schizzo 3D",
   "ui.activate": "Attiva",
   "ui.active_component": "Componente attivo",
@@ -1354,6 +1463,7 @@
   "ui.blocked": "Bloccato",
   "ui.bodies": "Corpi",
   "ui.bodies_all_if_none": "Corpi (tutti se nessuno)",
+  "ui.bottom": "Inferiore",
   "ui.box": "Parallelepipedo",
   "ui.break": "Spezza",
   "ui.browser_bodies_one": "{count} corpo",
@@ -1506,6 +1616,7 @@
   "ui.grid_follows_view_hint": "Le viste laterali mostrano la griglia sul piano verticale rivolto verso di esse anziché sul piano di appoggio",
   "ui.ground_shadow": "Ombra sul piano di appoggio",
   "ui.groupSelected": "Raggruppa selezionati",
+  "ui.hatch": "Tratteggio",
   "ui.heading_add_ins": "COMPONENTI AGGIUNTIVI",
   "ui.heading_assemble": "ASSEMBLA",
   "ui.heading_box": "PARALLELEPIPEDO",
@@ -1796,59 +1907,6 @@
   "ui.smooth_wheel_zoom": "Zoom fluido con rotellina",
   "ui.smooth_wheel_zoom_tip": "Disattiva per applicare immediatamente ogni evento della rotellina, senza coda di interpolazione",
   "ui.snap": "Aggancio",
-  "ui.space_mouse_axes_reassigned": "Gli assi sono riassegnati nelle Preferenze, e questo vale anche dopo questa calibrazione.",
-  "ui.space_mouse_calibrate": "Calibra…",
-  "ui.space_mouse_calibrate_tip": "Muovi la manopola come chiede la finestra, così SolidCraft impara in che direzione e quanto va ogni asse di questo mouse 3D. Viene salvata per questo mouse 3D.",
-  "ui.space_mouse_calibrate_title": "Calibra mouse 3D",
-  "ui.space_mouse_calibrated": "Calibrato",
-  "ui.space_mouse_calibration": "Calibrazione del mouse 3D",
-  "ui.space_mouse_calibration_done": "Fatto. Salvala per usarla ogni volta che questo mouse 3D è collegato.",
-  "ui.space_mouse_calibration_no_response": "Un asse si è mosso appena, quindi non si può calibrare. Ricomincia e muovi la manopola più a fondo ogni volta.",
-  "ui.space_mouse_dead_zone": "Zona morta",
-  "ui.space_mouse_dead_zone_tip": "Quanto deve muoversi la manopola prima che si muova la vista, come quota della sua corsa completa. Aumentala se la vista si sposta con la manopola a riposo.",
-  "ui.space_mouse_driven_by": "Quale movimento calibrato del dispositivo comanda questo asse. Se ne scegli uno già usato da un altro asse, i due si scambiano.",
-  "ui.space_mouse_driven_by_label": "comandato da",
-  "ui.space_mouse_driver": "Driver del mouse 3D",
-  "ui.space_mouse_driver_auto": "Automatico",
-  "ui.space_mouse_driver_direct": "Diretto (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Lettura diretta del dispositivo; spacenavd non è in esecuzione",
-  "ui.space_mouse_driver_only_spacenavd": "Lettura tramite spacenavd, l'unica possibilità disponibile",
-  "ui.space_mouse_forget": "Dimentica calibrazione",
-  "ui.space_mouse_hint": "Sposta e ruota la vista insieme; gli schizzi usano solo panoramica e zoom.",
-  "ui.space_mouse_motion_rotation_x": "Rotazione X",
-  "ui.space_mouse_motion_rotation_y": "Rotazione Y",
-  "ui.space_mouse_motion_rotation_z": "Rotazione Z",
-  "ui.space_mouse_motion_translation_x": "Traslazione X",
-  "ui.space_mouse_motion_translation_y": "Traslazione Y",
-  "ui.space_mouse_motion_translation_z": "Traslazione Z",
-  "ui.space_mouse_navigate": "Naviga con SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Nessun mouse 3D trovato",
-  "ui.space_mouse_not_calibrated": "Non calibrato",
-  "ui.space_mouse_reading": "Lettura",
-  "ui.space_mouse_reset_axes": "Ripristina assegnazione assi",
-  "ui.space_mouse_step_lift": "Solleva la manopola, tienila, poi lasciala.",
-  "ui.space_mouse_step_press": "Premi la manopola verso il basso, tienila, poi lasciala.",
-  "ui.space_mouse_step_pull": "Tira la manopola verso di te, tienila, poi lasciala.",
-  "ui.space_mouse_step_push": "Spingi la manopola lontano da te, tienila, poi lasciala.",
-  "ui.space_mouse_step_rest": "Togli la mano dalla manopola e lasciala ferma.",
-  "ui.space_mouse_step_slide_left": "Fai scorrere la manopola a sinistra, tienila, poi lasciala.",
-  "ui.space_mouse_step_slide_right": "Fai scorrere la manopola a destra, tienila, poi lasciala.",
-  "ui.space_mouse_step_tilt_back": "Inclina la manopola all'indietro (bordo anteriore in alto), tienila, poi lasciala.",
-  "ui.space_mouse_step_tilt_forward": "Inclina la manopola in avanti (bordo anteriore in basso), tienila, poi lasciala.",
-  "ui.space_mouse_step_tilt_left": "Inclina la manopola a sinistra (bordo sinistro in basso), tienila, poi lasciala.",
-  "ui.space_mouse_step_tilt_right": "Inclina la manopola a destra (bordo destro in basso), tienila, poi lasciala.",
-  "ui.space_mouse_step_twist_clockwise": "Ruota la manopola in senso orario, tienila, poi lasciala.",
-  "ui.space_mouse_step_twist_counterclockwise": "Ruota la manopola in senso antiorario, tienila, poi lasciala.",
-  "ui.space_mouse_view_axis": "Asse della vista",
-  "ui.space_mouse_view_off": "Disattivato",
-  "ui.space_mouse_view_off_tip": "Il profilo del driver del mouse 3D disattiva questo asse, quindi il suo movimento non muove la vista. Se qui scegli il movimento di un altro asse, i due si scambiano e quel movimento smette di muovere la vista.",
-  "ui.space_mouse_view_orbit_sideways": "Orbita sinistra / destra",
-  "ui.space_mouse_view_orbit_up_down": "Orbita su / giù",
-  "ui.space_mouse_view_pan_sideways": "Panoramica sinistra / destra",
-  "ui.space_mouse_view_pan_up_down": "Panoramica su / giù",
-  "ui.space_mouse_view_roll": "Rollio",
-  "ui.space_mouse_view_unmapped": "Asse {n}",
-  "ui.space_mouse_view_zoom": "Zoom",
   "ui.spacing": "Spaziatura",
   "ui.spacing_2": "Spaziatura 2",
   "ui.sphere": "Sfera",

assets/locales/ko.json

@@ -72,6 +72,7 @@
   "Choose…": "선택…",
   "Circular": "원형",
   "Circumference": "원주",
+  "Clockwise": "시계 방향",
   "Close draft": "초안 닫기",
   "Collisions": "충돌",
   "Colour": "색상",
@@ -323,6 +324,7 @@
   "Search commands": "명령 검색",
   "Search this library": "이 라이브러리 검색",
   "Section": "단면",
+  "Section position": "단면 위치",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "다른 항목 선택: 모델 위에서 왼쪽 버튼을 가만히 누르고 있거나(또는 오른쪽 클릭 › 다른 항목 선택…) 커서 아래의 모든 항목을 나열합니다. 같은 위치를 다시 클릭하면 다음 항목이 선택됩니다. 가운데 버튼을 더블 클릭하면 홈으로 이동합니다(환경설정 › 탐색).",
   "Select bodies (a face picks its body)": "바디 선택(면을 클릭하면 해당 바디 선택)",
   "Select bodies or faces instead": "대신 바디 또는 면을 선택하세요",
@@ -346,9 +348,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "이 디자인들이 저장되기 전에 SolidCraft가 종료되었습니다. 마지막 자동 저장본을 열 수 있습니다.",
   "Specialise": "특수화",
   "Speed": "속도",
+  "Square": "정사각형",
   "Stand it up": "세우기",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "세우기: X축 기준 90도 회전으로, 실행 취소할 수 있는 하나의 이동 피처로 적용됩니다.",
   "Stand this part up?": "이 부품을 세울까요?",
+  "Start angle": "시작 각도",
   "Start bulge": "시작 벌지",
   "Start continuity": "시작 연속성",
   "Step": "단계",
@@ -413,6 +417,7 @@
   "angle, height": "각도, 높이",
   "appearance.dielectric_ior": "유전체 굴절률",
   "appearance.metallic": "금속성",
+  "appearance.only_available": "사용 가능한 외관만",
   "appearance.pbr_help": "이 표면은 렌더링 작업 공간이나 제품 PNG에서 확인하세요. 굴절과 투과는 지원하지 않습니다.",
   "appearance.pbr_opaque": "불투명 PBR",
   "appearance.roughness": "거칠기",
@@ -531,6 +536,10 @@
   "cmd.file_insert_step": "STEP 삽입",
   "cmd.file_save_mesh": "메쉬로 저장",
   "cmd.file_slicers": "설치된 슬라이서",
+  "cmd.frame_member": "프레임 부재",
+  "cmd.frame_profile_insert": "프로파일 삽입",
+  "cmd.frame_profile_list": "프로파일 라이브러리",
+  "cmd.frame_profile_properties": "프로파일 속성",
   "cmd.inspect_accessibility": "접근성 분석",
   "cmd.inspect_center_of_mass": "무게중심",
   "cmd.inspect_clearance": "여유 간격",
@@ -570,6 +579,7 @@
   "cmd.material_create": "새 물리 재질",
   "cmd.material_delete": "물리 재질 삭제",
   "cmd.material_edit": "물리 재질 편집",
+  "cmd.material_inspect": "물리 재질 검사",
   "cmd.material_list": "재질 목록",
   "cmd.material_properties_directional": "방향별 탄성 계수",
   "cmd.material_properties_validate": "물리 재질 데이터 검증",
@@ -616,13 +626,32 @@
   "cmd.plastic_rules": "플라스틱 규칙 목록",
   "cmd.plastic_snap_fit": "스냅핏",
   "cmd.render_backends": "렌더링 백엔드",
+  "cmd.render_camera_fit": "렌더 대상 화면 맞춤",
+  "cmd.render_camera_get": "렌더 카메라 확인",
   "cmd.render_cancel": "렌더링 취소",
   "cmd.render_export": "PNG 내보내기",
+  "cmd.render_hdr_inspect": "HDR 소스 검사",
+  "cmd.render_library_appearance_apply": "라이브러리 불투명 외관 적용",
+  "cmd.render_library_describe": "렌더 리소스 검사",
+  "cmd.render_library_environment_apply": "내장 HDR 환경 적용",
+  "cmd.render_library_list": "렌더 라이브러리 탐색",
+  "cmd.render_library_physical_prepare": "Prepare Physical Reference",
+  "cmd.render_library_studio_apply": "제작된 스튜디오 조명 적용",
+  "cmd.render_library_studio_prepare": "제작된 스튜디오 조명 준비",
+  "cmd.render_library_surface_bind": "Save Surface Binding",
+  "cmd.render_library_surface_prepare": "제작된 표면 맵 준비",
+  "cmd.render_library_surface_unbind": "Remove Surface Binding",
+  "cmd.render_library_targets": "렌더 리소스 대상 찾기",
   "cmd.render_preflight": "렌더 요청 확인",
+  "cmd.render_result_pin": "표시된 렌더 결과 유지",
   "cmd.render_scene": "렌더링 장면 검사",
   "cmd.render_settings_apply": "렌더링 카메라 적용",
+  "cmd.render_settings_capture_hdr": "HDR과 렌더 설정 저장",
   "cmd.render_settings_get": "렌더링 설정",
   "cmd.render_settings_set": "렌더링 설정 저장",
+  "cmd.render_stage_backdrop": "물리 렌더 배경 저장",
+  "cmd.render_stage_clear": "Remove Render Stage",
+  "cmd.render_stage_ground": "Save Render Ground",
   "cmd.render_start": "이미지 렌더링",
   "cmd.render_status": "렌더링 진행 상황",
   "cmd.select_clear": "선택 지우기",
@@ -1000,13 +1029,33 @@
   "recovery.just_now": "방금",
   "recovery.min_ago": "{count}분 전",
   "recovery.never_saved": "저장된 적 없음",
+  "render.add_ground": "Add fitted ground to setup",
   "render.background": "장면 배경",
+  "render.bloom_enable": "표시 블룸",
+  "render.bloom_help": "양의 선형 하이라이트를 세 번의 정규화 필터로 확산하는 출력 전용 효과입니다. 반경은 출력 픽셀 단위이며 sRGB 전에 더합니다. 렌즈·볼륨·수렴 개선이 아니며 원본 EXR은 변하지 않습니다.",
+  "render.bloom_opaque": "블룸에는 불투명 출력이 필요합니다. 투명 PNG를 몰래 합성하지 않고 거부합니다.",
+  "render.bloom_radius": "블룸 반경",
+  "render.bloom_strength": "블룸 강도",
+  "render.bloom_threshold": "선형 하이라이트 임계값",
+  "render.clear_stage": "Remove saved stage",
+  "render.cpu_budget": "CPU 리소스 프로필",
+  "render.cpu_budget_bodies": "바디 수 상한",
+  "render.cpu_budget_compact": "컴팩트 (기존 제한)",
+  "render.cpu_budget_details": "리소스 제한",
+  "render.cpu_budget_help": "더 큰 제한은 명시적으로 선택합니다. 해상도와 샘플 수를 자동으로 줄이지 않습니다.",
+  "render.cpu_budget_memory": "작업 메모리 상한",
+  "render.cpu_budget_not_guarantee": "이 값은 허용 상한이며 RAM 예약이나 속도 보장이 아닙니다. 형상, 필름, 보관된 미리보기가 메모리 예산을 공유합니다. 렌더링은 취소할 수 있습니다.",
+  "render.cpu_budget_resize": "설정이 CPU 프로필이나 카메라 샘플 예산을 초과합니다. 더 작은 크기를 명시적으로 적용하거나 더 큰 프로필을 선택하세요.",
+  "render.cpu_budget_studio": "스튜디오 (큰 이미지)",
+  "render.cpu_budget_triangles": "삼각형 수 상한",
+  "render.cpu_budget_workstation": "워크스테이션 (대규모 장면)",
+  "render.exr_pending": "GPU는 원본 선형 EXR을 보존할 수 있습니다. 압축, 다중 레이어 이미지 및 보조 렌더 패스는 아직 사용할 수 없습니다.",
   "render.fit": "제품에 맞추기",
   "render.image_cancelled": "렌더링 취소됨",
   "render.image_cancelling": "취소 중",
   "render.image_completed": "이미지 내보내기 준비됨",
   "render.image_encoding": "PNG 인코딩 중",
-  "render.image_export": "PNG 내보내기",
+  "render.image_export": "완료된 이미지 내보내기",
   "render.image_failed": "렌더링 실패",
   "render.image_height": "높이",
   "render.image_help": "CPU 미리 보기 이미지 · PNG · 근사 투명도",
@@ -1024,17 +1073,98 @@
   "render.image_unknown": "렌더 상태를 확인할 수 없습니다",
   "render.image_use_largest": "이 비율에서 가장 큰 크기 사용:",
   "render.image_width": "너비",
+  "render.include_rig_cards": "Include passive cards and flags",
+  "render.library_applied": "리소스 변환을 적용했습니다. 시작 전에 전체 렌더 요청을 확인하세요.",
+  "render.library_apply_hdr": "이 HDR 환경과 함께 저장",
+  "render.library_apply_maps": "제작된 GPU 표면 맵 사용",
+  "render.library_apply_studio": "제작된 스튜디오 변환 저장",
+  "render.library_apply_uniform": "균일한 불투명 외관 적용",
+  "render.library_authored_help": "독자적으로 제작한 리소스는 표현용이며 측정된 공학 데이터가 아닙니다. 각 동작은 명시된 변환만 적용합니다.",
+  "render.library_blocked": "이 리소스에는 미해결 보정 또는 외부 태양 광원이 필요하여 아직 적용할 수 없습니다.",
+  "render.library_center": "리그 중심",
+  "render.library_emitters_only_ack": "광원만 사용하고 명시된 수동 반사판은 생략",
+  "render.library_environment_concepts": "환경 구상",
+  "render.library_extent": "대상 크기",
+  "render.library_hdr": "내장 HDR 환경",
+  "render.library_hdr_help": "원본 HDR을 저장 설정에 포함합니다. 제작된 경도 원점을 명시적으로 변환하며 저장 후 외부 파일이 필요하지 않습니다.",
+  "render.library_light_concepts": "조명 구상",
+  "render.library_maps_help": "Built-in maps can be saved with pinned sources and local occurrence mapping. Temporary optical overrides remain a separate mode.",
+  "render.library_material_concepts": "재질 구상",
+  "render.library_next": "다음 페이지",
+  "render.library_physical_profiles": "Physical reference profiles",
+  "render.library_previous": "이전 페이지",
+  "render.library_quality_concepts": "품질 사양",
+  "render.library_replace_environment": "기존 환경을 명시적으로 교체",
+  "render.library_replace_studio": "Replace saved lighting, environment and stage",
+  "render.library_results": "일치하는 리소스",
+  "render.library_rig_help": "Fit once at an explicit center and physical extent. Complete rigs include passive cards; calibration blockers still refuse. Conservative emitter/card clearance is checked before saving.",
+  "render.library_rigs": "제작된 조명 리그",
+  "render.library_save_maps": "Save maps to this setup",
+  "render.library_scene_bounds": "캡처된 장면 범위 사용",
+  "render.library_scenes": "장면 사양",
+  "render.library_search": "라이브러리 검색",
+  "render.library_selene": "SELENE 불투명 외관",
+  "render.library_specification_only": "사양만 제공되며 완전히 실행 가능한 프리셋이 아닙니다. 필요한 효과, 리소스 및 대상 역할은 명시적인 구현과 연결이 필요합니다.",
+  "render.library_surfaces": "제작된 PBR 표면",
+  "render.library_target": "대상 바디",
+  "render.library_title": "렌더 리소스 라이브러리",
+  "render.library_uniform_ack": "공간 변화나 고급 효과 없는 균일 근사 사용",
+  "render.material_color_replace": "기본 맵으로 바디 색상 교체",
+  "render.material_limits": "최대 128개 바디 설정, 분리된 유리 32개, 코팅 64개, 텍스처 연결 128개. 같은 맵은 메모리를 공유하며 실제 장치 및 전체 메모리 제한은 유지됩니다.",
+  "render.material_metallic_map": "금속성 맵 (선형)",
+  "render.material_roughness_map": "거칠기 맵 (선형)",
+  "render.material_v_up": "텍스처 V축은 이미지 위쪽",
   "render.navigation_help": "카메라는 디자인에서와 같이 움직입니다(환경설정 › 탐색). 설정 저장은 현재 카메라를 기록합니다.",
   "render.opaque_image_summary": "미리보기 PNG · 불투명 PBR · 블렌딩 투명도",
   "render.opaque_preview_help": "불투명 PBR 및 단색 표시, 블렌딩 투명도를 지원합니다. 굴절, HDRI 및 최종 렌더링은 아직 지원하지 않습니다.",
+  "render.output_format_status": "PNG는 완료된 표시 이미지 그대로입니다. 선택적 GPU EXR은 표시 필터 전 선형 FLOAT32 방사 휘도를 보존합니다. 미리보기 캐시나 다른 작업으로 바꾸어 내보내지 않습니다.",
+  "render.passive_stage": "Render-only stage",
+  "render.passive_stage_help": "Finite passive panels belong only to rendered images. They do not add CAD bodies or mass. Placement is fixed after applying; intersecting product bounds refuse. CPU does not provide diffuse bounce lighting.",
   "render.perspective": "원근 카메라",
+  "render.physical_acknowledge": "I understand this partial reference needs grade, condition and source review",
+  "render.physical_associations": "Physical candidates and roles",
+  "render.physical_copy_plan": "Copy plan with sources and omissions",
+  "render.physical_material_name": "Proposed reference material name",
+  "render.physical_omissions": "Properties not representable in the native card",
+  "render.physical_plan_only": "Read-only plan prepared. No material was created or assigned. Keep its extended profile and omissions when reviewing the native card.",
+  "render.physical_prepare_plan": "Prepare creation plan (does not apply)",
+  "render.physical_separate": "Appearance is not material identification. These are sourced references, not certified effective properties. Existing mass, engineering materials and optics are unchanged.",
+  "render.physical_unknown": "No numerical candidate is established. Grade, formulation or construction must be specified; unknown is not zero.",
   "render.preview": "통합 미리보기",
   "render.preview_help": "래스터 셰이딩과 블렌딩 투명도를 사용합니다. 굴절, HDRI 및 최종 렌더링은 아직 지원하지 않습니다.",
   "render.reload_settings": "저장된 설정 다시 불러오기",
+  "render.replace_saved_surface": "Replace an existing saved binding for this target",
   "render.restore_camera": "저장된 카메라 복원",
+  "render.result_reduced_display": "표시 미리보기를 뷰포트 장치 또는 캐시 제한에 맞춰 축소했습니다. 보관된 PNG와 내보내기는 전체 해상도를 유지합니다. 이 축소 보기에서는 원본 100% 검사가 불가능합니다.",
   "render.return_design": "설계로 돌아가기",
+  "render.ribbon_backgrounds": "배경",
+  "render.ribbon_check": "검사",
+  "render.ribbon_check_help": "렌더에 제출할 현재 설정을 그대로 검증합니다. 엔진 전환, 축소, 리소스 교체를 몰래 수행하지 않습니다.",
+  "render.ribbon_edit_lights": "조명 편집",
+  "render.ribbon_environment_help": "HDR 조명, 카메라 전용 배경, 물리 무대는 독립된 설정이며 교체에는 명시적 확인이 필요합니다.",
+  "render.ribbon_finish_dialog": "먼저 파일 또는 확인 대화 상자를 완료하세요.",
+  "render.ribbon_frame": "화면 맞춤",
+  "render.ribbon_hdr_library": "HDR 라이브러리",
+  "render.ribbon_job_active": "렌더링이 진행 중입니다. 새 작업 전에 명시적으로 취소하세요.",
+  "render.ribbon_light_rigs": "조명 구성",
+  "render.ribbon_lights_help": "조명 구성을 검토하거나 지원 조명을 편집합니다. 명시적으로 적용하기 전에는 현재 설정을 교체하지 않습니다.",
+  "render.ribbon_materials": "재질",
+  "render.ribbon_materials_help": "공용 외관 검사기와 원본 표면 라이브러리를 엽니다. 광학 편집은 공학 속성을 임의로 변경하지 않습니다.",
+  "render.ribbon_no_active_job": "취소할 활성 렌더링이 없습니다.",
+  "render.ribbon_no_result": "이미지를 내보내려면 렌더링을 완료하세요.",
+  "render.ribbon_no_saved_camera": "카메라 복원 전에 샷을 저장하세요.",
+  "render.ribbon_saved_camera": "저장 카메라",
+  "render.ribbon_shots": "샷",
+  "render.ribbon_studios": "스튜디오",
+  "render.ribbon_studios_help": "구현된 스튜디오를 찾아보고 적용 전에 교체 항목을 검토합니다. 개념 장면은 구분됩니다.",
+  "render.ribbon_surface_maps": "표면 맵",
   "render.save_setup": "설정 저장",
+  "render.saved_maps_runtime_conflict": "Saved surface bindings cannot be mixed with temporary optical overrides or an unsaved HDR. Save the HDR or remove the temporary inputs explicitly.",
+  "render.saved_surface_remove": "Remove saved binding",
+  "render.saved_surfaces": "Saved surface bindings",
+  "render.saved_surfaces_help": "Pinned built-in maps follow the selected occurrence in local millimeters. A replaced or missing target is an error, never an automatic reassignment.",
   "render.setup_name": "설정 이름",
+  "render.stage_panel_count": "Saved panels",
   "render.unavailable_preview": "이 설정은 사용할 수 없는 미리보기 프로필을 요청합니다.",
   "render.unsaved": "저장하지 않은 미리보기 변경 사항",
   "render.use_preview": "통합 미리보기 사용",
@@ -1070,6 +1200,8 @@
   "settings.msaa_applies_on_restart": "안티앨리어싱은 다음에 SolidCraft를 시작할 때 적용됩니다",
   "settings.msaa_reset": "{setting}: {requested}×는 이 그래픽 장치에서 지원되지 않아 {reset}×로 변경했습니다(지원: {supported}).",
   "settings.msaa_unsupported": "이 그래픽 장치에서 지원되지 않음",
+  "settings.reference_geometry_through_bodies": "바디를 통해 참조 형상 표시",
+  "settings.reference_geometry_through_bodies_help": "비활성 스케치 윤곽과 기준 평면을 음영 처리된 바디 위에 그립니다",
   "settings.reset_intro": "다음 설정은 이 컴퓨터에서 작동하지 않아 SolidCraft를 시작할 수 없게 하므로 변경되었습니다:",
   "settings.reset_title": "설정이 변경되었습니다",
   "settings.supersampling_note": "뷰를 더 높은 해상도로 그린 뒤 축소합니다. 4K 미만 화면에서 모서리, 선, 그리드가 더 매끄러워집니다. GPU 시간이 듭니다: 1.5×에서 약 2.25배, 2×에서 4배의 픽셀.",
@@ -1120,12 +1252,115 @@
   "toolbar.customize_note": "{tab} 탭입니다. 명령을 선택하면 도구 모음에 해당 버튼이 추가됩니다. 패널의 드롭다운에서 행을 도구 모음으로 끌거나, 버튼을 도구 모음 밖으로 끌어 제거하거나, 드롭다운 행의 고정 핀을 사용할 수도 있습니다.",
   "toolbar.image": "이미지",
   "toolbar.render": "렌더링",
+  "toolbar.render_appearance": "외관",
+  "toolbar.render_camera": "카메라",
+  "toolbar.render_environment": "환경",
+  "toolbar.render_lighting": "조명",
   "toolbar.render_scene": "장면",
   "trace.points": "경로를 따라 {count}개 점",
   "trace.stopped_by_contact": "샘플 {sample}에서 끝남: {a}이(가) {b}을(를) 통과합니다",
   "trace.stopped_by_loop": "샘플 {sample}에서 끝남: {joint}을(를) 지나는 루프를 더 이상 닫을 수 없습니다",
   "ui.1_degree_of_freedom": "자유도 1개",
+  "ui.3d_mouse_axes_reassigned": "축이 환경설정에서 다시 지정되어 있으며, 이 보정 후에도 적용됩니다.",
+  "ui.3d_mouse_button": "버튼 {number}",
+  "ui.3d_mouse_button_nothing": "없음",
+  "ui.3d_mouse_button_settings": "3D 마우스 설정",
+  "ui.3d_mouse_buttons": "버튼",
+  "ui.3d_mouse_buttons_hint": "3D 마우스의 버튼을 누르면 여기에 나타납니다. 동작을 고르세요.",
+  "ui.3d_mouse_buttons_no_device": "버튼 동작을 정하려면 3D 마우스를 연결하세요.",
+  "ui.3d_mouse_buttons_reset": "기본 버튼으로 되돌리기",
+  "ui.3d_mouse_calibrate": "보정…",
+  "ui.3d_mouse_calibrate_tip": "창의 안내대로 캡을 움직이면 SolidCraft가 이 3D 마우스의 각 축이 어느 방향으로 얼마나 움직이는지 학습합니다. 이 3D 마우스에 저장됩니다.",
+  "ui.3d_mouse_calibrate_title": "3D 마우스 보정",
+  "ui.3d_mouse_calibrate_wait": "SolidCraft가 인식할 수 있도록 3D 마우스를 한 번 움직여 주세요.",
+  "ui.3d_mouse_calibrated": "보정됨",
+  "ui.3d_mouse_calibration": "3D 마우스 보정",
+  "ui.3d_mouse_calibration_done": "완료했습니다. 저장하면 이 3D 마우스를 연결할 때마다 사용됩니다.",
+  "ui.3d_mouse_calibration_no_response": "거의 움직이지 않은 축이 있어 보정할 수 없습니다. 처음부터 다시 하고 매번 캡을 더 멀리 움직이세요.",
+  "ui.3d_mouse_circles_help": "원은 보정 후 장치가 보내는 값을 보여 줍니다. 테스트 모델은 반전, 속도, 축 할당을 거쳐 화면이 그 값으로 하는 일을 보여 줍니다.",
+  "ui.3d_mouse_dead_zone": "데드존",
+  "ui.3d_mouse_dead_zone_tip": "뷰가 움직이기 전에 캡이 움직여야 하는 정도로, 전체 이동 범위에 대한 비율입니다. 캡을 건드리지 않았는데 뷰가 움직이면 높이세요.",
+  "ui.3d_mouse_denied": "SolidCraft가 3D 마우스를 찾았지만 읽을 권한이 없습니다. udev 규칙은 3D 마우스 설정 안내를 참고하세요.",
+  "ui.3d_mouse_denied_short": "찾았지만 읽을 수 없음",
+  "ui.3d_mouse_driven_by": "이 축을 움직이는 장치의 보정된 동작입니다. 다른 축이 이미 쓰는 동작을 고르면 둘이 서로 바뀝니다.",
+  "ui.3d_mouse_driven_by_label": "제어 동작",
+  "ui.3d_mouse_driver": "3D 마우스 드라이버",
+  "ui.3d_mouse_driver_auto": "자동",
+  "ui.3d_mouse_driver_direct": "직접 (hidraw)",
+  "ui.3d_mouse_driver_fallback": "지금은 spacenavd를 통해 읽는 중입니다. 장치 자체를 열 수 없었습니다.",
+  "ui.3d_mouse_driver_only_direct": "장치를 직접 읽는 중 (spacenavd가 실행 중이 아님)",
+  "ui.3d_mouse_driver_only_spacenavd": "spacenavd로 읽는 중 (다른 방법이 없음)",
+  "ui.3d_mouse_forget": "보정 삭제",
+  "ui.3d_mouse_ghost_left_viewport": "뷰포트 왼쪽",
+  "ui.3d_mouse_ghost_left_window": "창 왼쪽",
+  "ui.3d_mouse_ghost_position": "위치",
+  "ui.3d_mouse_ghost_right_viewport": "뷰포트 오른쪽",
+  "ui.3d_mouse_hint": "뷰를 함께 이동하고 회전합니다. 스케치는 이동과 확대/축소만 사용합니다.",
+  "ui.3d_mouse_kind_cap": "중앙 복귀",
+  "ui.3d_mouse_kind_question": "어떤 종류의 3D 마우스인가요?",
+  "ui.3d_mouse_kind_trackball": "트랙볼",
+  "ui.3d_mouse_looks_like_cap": "잡고 있는 동안 값이 그대로 유지됩니다. ‘중앙 복귀’ 방식 장치처럼요.",
+  "ui.3d_mouse_looks_like_trackball": "움직임을 멈추면 바로 값이 돌아옵니다. 트랙볼처럼요.",
+  "ui.3d_mouse_motion_rotation_x": "회전 X",
+  "ui.3d_mouse_motion_rotation_y": "회전 Y",
+  "ui.3d_mouse_motion_rotation_z": "회전 Z",
+  "ui.3d_mouse_motion_translation_x": "이동 X",
+  "ui.3d_mouse_motion_translation_y": "이동 Y",
+  "ui.3d_mouse_motion_translation_z": "이동 Z",
+  "ui.3d_mouse_navigate": "3D 마우스로 탐색",
+  "ui.3d_mouse_none": "3D 마우스를 찾을 수 없음",
+  "ui.3d_mouse_not_calibrated": "보정 안 됨",
+  "ui.3d_mouse_offer": "3D 마우스를 보정하면 바뀌거나 반전된 축이 바로잡히고 속도와 조작감이 맞춰집니다.",
+  "ui.3d_mouse_offer_never": "다시 표시하지 않음",
+  "ui.3d_mouse_offer_swap": "Hidraw(직접 드라이버)로 전환",
+  "ui.3d_mouse_reading": "읽은 값",
+  "ui.3d_mouse_reset_axes": "축 지정 초기화",
+  "ui.3d_mouse_reset_view": "뷰 초기화",
+  "ui.3d_mouse_restore": "3D 마우스 기본값 복원",
+  "ui.3d_mouse_restore_ask": "3D 마우스 설정을 기본값으로 되돌릴까요? 보정과 버튼 할당은 그대로 유지됩니다.",
+  "ui.3d_mouse_section": "3D 마우스",
+  "ui.3d_mouse_show_in_view": "3D 뷰에 3D 마우스 표시",
+  "ui.3d_mouse_show_in_view_tip": "왼쪽 아래에 3D 마우스 그림을 띄워 움직임을 따라 보여 줍니다.",
+  "ui.3d_mouse_skip": "내 장치는 이 동작을 못 해요",
+  "ui.3d_mouse_skip_tip": "이 동작을 양방향 모두 건너뛰고 보정에서 뺍니다.",
   "ui.3d_mouse_speed": "3D 마우스 속도",
+  "ui.3d_mouse_step_lift": "캡을 위로 들어 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_press": "캡을 아래로 눌러 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_pull": "캡을 몸 쪽으로 당겨 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_push": "캡을 앞쪽으로 밀어 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_rest": "캡에서 손을 떼고 가만히 두세요.",
+  "ui.3d_mouse_step_rest_trackball": "볼에서 손을 떼고 가만히 두세요.",
+  "ui.3d_mouse_step_ring_clockwise": "스크롤 링을 시계 방향으로 몇 칸 돌리세요.",
+  "ui.3d_mouse_step_ring_counterclockwise": "스크롤 링을 시계 반대 방향으로 몇 칸 돌리세요.",
+  "ui.3d_mouse_step_roll_away": "볼을 바깥쪽으로 몇 번 굴린 다음 멈추게 두세요.",
+  "ui.3d_mouse_step_roll_left": "볼을 왼쪽으로 몇 번 굴린 다음 멈추게 두세요.",
+  "ui.3d_mouse_step_roll_right": "볼을 오른쪽으로 몇 번 굴린 다음 멈추게 두세요.",
+  "ui.3d_mouse_step_roll_toward": "볼을 몸 쪽으로 몇 번 굴린 다음 멈추게 두세요.",
+  "ui.3d_mouse_step_slide_left": "캡을 왼쪽으로 밀어 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_slide_right": "캡을 오른쪽으로 밀어 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_spin_clockwise": "볼을 시계 방향으로 몇 번 돌린 다음 멈추게 두세요.",
+  "ui.3d_mouse_step_spin_counterclockwise": "볼을 시계 반대 방향으로 몇 번 돌린 다음 멈추게 두세요.",
+  "ui.3d_mouse_step_tilt_away": "캡 윗부분을 바깥쪽으로 기울여(가까운 쪽 가장자리가 올라감) 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_tilt_left": "캡을 왼쪽으로 기울여(왼쪽 가장자리를 아래로) 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_tilt_right": "캡을 오른쪽으로 기울여(오른쪽 가장자리를 아래로) 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_tilt_toward": "캡 윗부분을 몸 쪽으로 기울여(가까운 쪽 가장자리가 내려감) 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_touch": "캡을 누르지 말고 손만 올려 두세요.",
+  "ui.3d_mouse_step_twist_clockwise": "캡을 시계 방향으로 돌려 유지한 다음 놓으세요.",
+  "ui.3d_mouse_step_twist_counterclockwise": "캡을 시계 반대 방향으로 돌려 유지한 다음 놓으세요.",
+  "ui.3d_mouse_switch_cap": "중앙 복귀형으로 보정",
+  "ui.3d_mouse_switch_trackball": "트랙볼로 보정",
+  "ui.3d_mouse_view_axis": "뷰 축",
+  "ui.3d_mouse_view_off": "끔",
+  "ui.3d_mouse_view_off_tip": "3D 마우스 드라이버 프로필이 이 축을 끄므로, 이 축의 동작으로는 뷰가 움직이지 않습니다. 여기서 다른 축의 동작을 고르면 둘이 바뀌고, 그 동작은 더 이상 뷰를 움직이지 않습니다.",
+  "ui.3d_mouse_view_orbit_sideways": "좌우 궤도",
+  "ui.3d_mouse_view_orbit_up_down": "상하 궤도",
+  "ui.3d_mouse_view_pan_sideways": "좌우 이동",
+  "ui.3d_mouse_view_pan_up_down": "상하 이동",
+  "ui.3d_mouse_view_roll": "롤",
+  "ui.3d_mouse_view_unmapped": "축 {n}",
+  "ui.3d_mouse_view_zoom": "확대/축소",
+  "ui.3d_mouse_waiting": "움직임 대기 중",
+  "ui.3d_mouse_wiggle": "연결되어 있다면 살짝 움직여 보세요.",
   "ui.3d_sketch": "3D 스케치",
   "ui.activate": "활성화",
   "ui.active_component": "활성 컴포넌트",
@@ -1355,6 +1590,7 @@
   "ui.blocked": "막힘",
   "ui.bodies": "바디",
   "ui.bodies_all_if_none": "바디 (없으면 전체)",
+  "ui.bottom": "저면",
   "ui.box": "박스",
   "ui.break": "끊기",
   "ui.browser_bodies_one": "{count}개 바디",
@@ -1507,6 +1743,7 @@
   "ui.grid_follows_view_hint": "측면 뷰에서는 지면 대신 마주 보는 수직 평면에 격자를 표시합니다",
   "ui.ground_shadow": "바닥 그림자",
   "ui.groupSelected": "선택 항목 그룹화",
+  "ui.hatch": "해칭",
   "ui.heading_add_ins": "애드인",
   "ui.heading_assemble": "조립",
   "ui.heading_box": "박스",
@@ -1768,6 +2005,12 @@
   "ui.sent_to_slicer": "{slicer}(으)로 보냈습니다",
   "ui.sheet_gap": "틈",
   "ui.shell": "쉘",
+  "ui.shortcut_capture_add_key": "일반 키 하나를 추가하세요. Esc를 누르면 취소됩니다.",
+  "ui.shortcut_capture_hint": "단축키를 클릭한 다음 보조 키와 일반 키 하나를 누르세요. 1초 이내에 보조 키를 추가하고 모든 키를 놓아 확정하세요. Esc를 누르면 취소됩니다.",
+  "ui.shortcut_capture_press": "보조 키와 일반 키 하나를 누르세요. Esc를 누르면 취소됩니다.",
+  "ui.shortcut_capture_release": "모든 키를 놓아 확정하세요. Esc를 누르면 취소됩니다.",
+  "ui.shortcut_capture_settling": "단축키 확인 중… Esc를 누르면 취소됩니다.",
+  "ui.shortcut_multiple_keys": "보조 키와 일반 키 하나만 사용하세요. 단축키를 클릭하여 다시 시도하세요.",
   "ui.show": "표시",
   "ui.showAll": "모두 표시",
   "ui.showAllBodies": "모두 표시",
@@ -1797,59 +2040,6 @@
   "ui.smooth_wheel_zoom": "부드러운 휠 확대/축소",
   "ui.smooth_wheel_zoom_tip": "끄면 휠 이벤트를 부드러운 꼬리 없이 즉시 적용합니다",
   "ui.snap": "스냅",
-  "ui.space_mouse_axes_reassigned": "축이 환경설정에서 다시 지정되어 있으며, 이 보정 후에도 적용됩니다.",
-  "ui.space_mouse_calibrate": "보정…",
-  "ui.space_mouse_calibrate_tip": "창의 안내대로 캡을 움직이면 SolidCraft가 이 3D 마우스의 각 축이 어느 방향으로 얼마나 움직이는지 학습합니다. 이 3D 마우스에 저장됩니다.",
-  "ui.space_mouse_calibrate_title": "3D 마우스 보정",
-  "ui.space_mouse_calibrated": "보정됨",
-  "ui.space_mouse_calibration": "3D 마우스 보정",
-  "ui.space_mouse_calibration_done": "완료했습니다. 저장하면 이 3D 마우스를 연결할 때마다 사용됩니다.",
-  "ui.space_mouse_calibration_no_response": "거의 움직이지 않은 축이 있어 보정할 수 없습니다. 처음부터 다시 하고 매번 캡을 더 멀리 움직이세요.",
-  "ui.space_mouse_dead_zone": "데드존",
-  "ui.space_mouse_dead_zone_tip": "보기가 움직이기 전에 캡이 움직여야 하는 정도로, 전체 이동 범위에 대한 비율입니다. 캡을 건드리지 않았는데 보기가 움직이면 높이세요.",
-  "ui.space_mouse_driven_by": "이 축을 움직이는 장치의 보정된 동작입니다. 다른 축이 이미 쓰는 동작을 고르면 둘이 서로 바뀝니다.",
-  "ui.space_mouse_driven_by_label": "제어 동작",
-  "ui.space_mouse_driver": "3D 마우스 드라이버",
-  "ui.space_mouse_driver_auto": "자동",
-  "ui.space_mouse_driver_direct": "직접 (hidraw)",
-  "ui.space_mouse_driver_only_direct": "장치를 직접 읽는 중 (spacenavd가 실행 중이 아님)",
-  "ui.space_mouse_driver_only_spacenavd": "spacenavd로 읽는 중 (다른 방법이 없음)",
-  "ui.space_mouse_forget": "보정 삭제",
-  "ui.space_mouse_hint": "뷰를 함께 이동하고 회전합니다. 스케치는 이동과 확대/축소만 사용합니다.",
-  "ui.space_mouse_motion_rotation_x": "회전 X",
-  "ui.space_mouse_motion_rotation_y": "회전 Y",
-  "ui.space_mouse_motion_rotation_z": "회전 Z",
-  "ui.space_mouse_motion_translation_x": "이동 X",
-  "ui.space_mouse_motion_translation_y": "이동 Y",
-  "ui.space_mouse_motion_translation_z": "이동 Z",
-  "ui.space_mouse_navigate": "SpaceNavigator / SpaceMouse로 탐색",
-  "ui.space_mouse_none": "3D 마우스를 찾을 수 없음",
-  "ui.space_mouse_not_calibrated": "보정 안 됨",
-  "ui.space_mouse_reading": "읽은 값",
-  "ui.space_mouse_reset_axes": "축 지정 초기화",
-  "ui.space_mouse_step_lift": "캡을 위로 들어 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_press": "캡을 아래로 눌러 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_pull": "캡을 몸 쪽으로 당겨 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_push": "캡을 앞쪽으로 밀어 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_rest": "캡에서 손을 떼고 가만히 두세요.",
-  "ui.space_mouse_step_slide_left": "캡을 왼쪽으로 밀어 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_slide_right": "캡을 오른쪽으로 밀어 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_tilt_back": "캡을 뒤로 기울여(앞쪽 가장자리를 위로) 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_tilt_forward": "캡을 앞으로 기울여(앞쪽 가장자리를 아래로) 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_tilt_left": "캡을 왼쪽으로 기울여(왼쪽 가장자리를 아래로) 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_tilt_right": "캡을 오른쪽으로 기울여(오른쪽 가장자리를 아래로) 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_twist_clockwise": "캡을 시계 방향으로 돌려 유지한 다음 놓으세요.",
-  "ui.space_mouse_step_twist_counterclockwise": "캡을 시계 반대 방향으로 돌려 유지한 다음 놓으세요.",
-  "ui.space_mouse_view_axis": "보기 축",
-  "ui.space_mouse_view_off": "끔",
-  "ui.space_mouse_view_off_tip": "3D 마우스 드라이버 프로필이 이 축을 끄므로, 이 축의 동작으로는 뷰가 움직이지 않습니다. 여기서 다른 축의 동작을 고르면 둘이 바뀌고, 그 동작은 더 이상 뷰를 움직이지 않습니다.",
-  "ui.space_mouse_view_orbit_sideways": "좌우 궤도",
-  "ui.space_mouse_view_orbit_up_down": "상하 궤도",
-  "ui.space_mouse_view_pan_sideways": "좌우 이동",
-  "ui.space_mouse_view_pan_up_down": "상하 이동",
-  "ui.space_mouse_view_roll": "롤",
-  "ui.space_mouse_view_unmapped": "축 {n}",
-  "ui.space_mouse_view_zoom": "확대/축소",
   "ui.spacing": "간격",
   "ui.spacing_2": "간격 2",
   "ui.sphere": "구",
@@ -1891,7 +2081,7 @@
   "ui.top": "상면",
   "ui.torus": "토러스",
   "ui.total_angle": "전진 각도",
-  "ui.trackpad_pan_tip": "트랙패드 제스처로 이동(끔: 휠처럼 확대/축소). 마우스 휠은 확대/축소, 엄지 휠은 좌우 이동, 핀치는 항상 확대/축소합니다",
+  "ui.trackpad_pan_tip": "두 손가락 스크롤로 화면을 이동합니다. Fusion에서는 Shift + 두 손가락 스크롤로 회전합니다. 끄면 스크롤로 확대/축소합니다. 마우스 휠과 핀치는 확대/축소하고, 엄지 휠은 좌우로 이동합니다.",
   "ui.trim": "트림",
   "ui.twist": "비틀림",
   "ui.two_finger_scroll_pans": "두 손가락 스크롤로 이동",

assets/locales/ms.json

@@ -72,6 +72,7 @@
   "Choose…": "Pilih…",
   "Circular": "Bulat",
   "Circumference": "Lilitan",
+  "Clockwise": "Ikut arah jam",
   "Close draft": "Tutup draf",
   "Collisions": "Perlanggaran",
   "Colour": "Warna",
@@ -322,6 +323,7 @@
   "Search commands": "Cari arahan",
   "Search this library": "Cari dalam koleksi ini",
   "Section": "Keratan",
+  "Section position": "Kedudukan keratan",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Pilih Lain: tahan butang kiri pada model tanpa bergerak (atau klik kanan › Pilih Lain…) untuk senarai objek di bawah kursor. Klik tempat sama untuk objek seterusnya. Klik dua kali butang tengah untuk ke Utama (Tetapan › Navigasi).",
   "Select bodies (a face picks its body)": "Pilih jasad (klik muka untuk pilih jasadnya)",
   "Select bodies or faces instead": "Pilih jasad atau muka",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft ditutup sebelum reka bentuk disimpan. Buka simpanan automatik terakhirnya.",
   "Specialise": "Khususkan",
   "Speed": "Kelajuan",
+  "Square": "Segi empat sama",
   "Stand it up": "Tegakkan",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Tegakkan: suku putaran pada X, satu ciri Alih yang boleh dibatalkan.",
   "Stand this part up?": "Tegakkan bahagian ini?",
+  "Start angle": "Sudut mula",
   "Start bulge": "Bonjolan permulaan",
   "Start continuity": "Keselanjaran permulaan",
   "Step": "Langkah",
@@ -412,6 +416,7 @@
   "angle, height": "sudut, ketinggian",
   "appearance.dielectric_ior": "IOR Dielektrik",
   "appearance.metallic": "Sifat Logam",
+  "appearance.only_available": "Rupa yang tersedia sahaja",
   "appearance.pbr_help": "Lihat dalam Render atau PNG produk. Tiada pembiasan atau penembusan cahaya.",
   "appearance.pbr_opaque": "PBR Legap",
   "appearance.roughness": "Kekasaran",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Sisip STEP",
   "cmd.file_save_mesh": "Simpan sebagai Mesh",
   "cmd.file_slicers": "Penghiris Terpasang",
+  "cmd.frame_member": "Anggota Rangka",
+  "cmd.frame_profile_insert": "Sisipkan Profil",
+  "cmd.frame_profile_list": "Pustaka Profil",
+  "cmd.frame_profile_properties": "Sifat Profil",
   "cmd.inspect_accessibility": "Analisis Kebolehcapaian",
   "cmd.inspect_center_of_mass": "Pusat Jisim",
   "cmd.inspect_clearance": "Kelegaan",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Bahan Fizikal Baharu",
   "cmd.material_delete": "Padam Bahan Fizikal",
   "cmd.material_edit": "Sunting Bahan Fizikal",
+  "cmd.material_inspect": "Periksa Bahan Fizikal",
   "cmd.material_list": "Senarai Bahan",
   "cmd.material_properties_directional": "Modulus Keanjalan Berarah",
   "cmd.material_properties_validate": "Sahkan Data Bahan Fizikal",
@@ -1121,7 +1131,106 @@
   "trace.stopped_by_contact": "Berakhir pada sampel {sample}: {a} akan menembusi {b}",
   "trace.stopped_by_loop": "Berakhir pada sampel {sample}: gelung melalui {joint} tidak lagi dapat ditutup",
   "ui.1_degree_of_freedom": "1 darjah kebebasan",
+  "ui.3d_mouse_axes_reassigned": "Paksi ditetapkan semula dalam Keutamaan, dan itu masih terpakai di atas penentukuran ini.",
+  "ui.3d_mouse_button": "Butang {number}",
+  "ui.3d_mouse_button_nothing": "Tiada",
+  "ui.3d_mouse_button_settings": "Tetapan tetikus 3D",
+  "ui.3d_mouse_buttons": "Butang",
+  "ui.3d_mouse_buttons_hint": "Tekan butang pada tetikus 3D anda untuk mencarinya di sini, kemudian pilih fungsinya.",
+  "ui.3d_mouse_buttons_no_device": "Sambungkan tetikus 3D untuk menetapkan fungsi butangnya.",
+  "ui.3d_mouse_buttons_reset": "Pulihkan butang lalai",
+  "ui.3d_mouse_calibrate": "Tentukur…",
+  "ui.3d_mouse_calibrate_tip": "Gerakkan penutup seperti yang diminta tetingkap, supaya SolidCraft mempelajari arah dan jarak setiap paksi tetikus 3D ini. Disimpan untuk tetikus 3D ini.",
+  "ui.3d_mouse_calibrate_title": "Tentukur tetikus 3D",
+  "ui.3d_mouse_calibrate_wait": "Gerakkan tetikus 3D sekali supaya SolidCraft dapat melihatnya.",
+  "ui.3d_mouse_calibrated": "Telah ditentukur",
+  "ui.3d_mouse_calibration": "Penentukuran tetikus 3D",
+  "ui.3d_mouse_calibration_done": "Selesai. Simpan untuk digunakan setiap kali tetikus 3D ini disambungkan.",
+  "ui.3d_mouse_calibration_no_response": "Satu paksi hampir tidak bergerak, jadi tidak dapat ditentukur. Mulakan semula dan gerakkan penutup lebih jauh setiap kali.",
+  "ui.3d_mouse_circles_help": "Bulatan menunjukkan apa yang dihantar peranti selepas penentukuran. Model ujian menunjukkan apa yang dilakukan paparan dengannya, selepas songsangan, kelajuan dan penetapan paksi.",
+  "ui.3d_mouse_dead_zone": "Zon mati",
+  "ui.3d_mouse_dead_zone_tip": "Sejauh mana penutup perlu bergerak sebelum pandangan bergerak, sebagai bahagian daripada julat penuhnya. Naikkan jika pandangan hanyut semasa penutup dalam keadaan rehat.",
+  "ui.3d_mouse_denied": "SolidCraft nampak tetikus 3D tetapi tidak dibenarkan membacanya. Lihat nota persediaan tetikus 3D untuk peraturan udev.",
+  "ui.3d_mouse_denied_short": "Dijumpai, tetapi tidak boleh dibaca",
+  "ui.3d_mouse_driven_by": "Gerakan peranti yang telah ditentukur yang memacu paksi ini. Memilih gerakan yang sudah digunakan paksi lain akan menukar kedua-duanya.",
+  "ui.3d_mouse_driven_by_label": "dipacu oleh",
+  "ui.3d_mouse_driver": "Pemacu tetikus 3D",
+  "ui.3d_mouse_driver_auto": "Automatik",
+  "ui.3d_mouse_driver_direct": "Terus (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Buat masa ini dibaca melalui spacenavd: peranti itu sendiri tidak dapat dibuka.",
+  "ui.3d_mouse_driver_only_direct": "Membaca peranti secara terus; spacenavd tidak berjalan",
+  "ui.3d_mouse_driver_only_spacenavd": "Membaca melalui spacenavd, satu-satunya cara yang ada",
+  "ui.3d_mouse_forget": "Lupakan penentukuran",
+  "ui.3d_mouse_ghost_left_viewport": "Viewport kiri",
+  "ui.3d_mouse_ghost_left_window": "Tetingkap kiri",
+  "ui.3d_mouse_ghost_position": "Kedudukan",
+  "ui.3d_mouse_ghost_right_viewport": "Viewport kanan",
+  "ui.3d_mouse_hint": "Alih dan putar pandangan serentak; dalam lakaran, hanya sorot dan zum digunakan.",
+  "ui.3d_mouse_kind_cap": "Kembali ke tengah",
+  "ui.3d_mouse_kind_question": "Apakah jenis tetikus 3D ini?",
+  "ui.3d_mouse_kind_trackball": "Bola jejak",
+  "ui.3d_mouse_looks_like_cap": "Bacaan kekal selagi anda menahannya, seperti peranti jenis “Kembali ke tengah”.",
+  "ui.3d_mouse_looks_like_trackball": "Bacaan kembali sebaik sahaja anda berhenti bergerak, seperti bola jejak.",
+  "ui.3d_mouse_motion_rotation_x": "Putaran X",
+  "ui.3d_mouse_motion_rotation_y": "Putaran Y",
+  "ui.3d_mouse_motion_rotation_z": "Putaran Z",
+  "ui.3d_mouse_motion_translation_x": "Anjakan X",
+  "ui.3d_mouse_motion_translation_y": "Anjakan Y",
+  "ui.3d_mouse_motion_translation_z": "Anjakan Z",
+  "ui.3d_mouse_navigate": "Navigasi dengan tetikus 3D",
+  "ui.3d_mouse_none": "Tiada tetikus 3D ditemui",
+  "ui.3d_mouse_not_calibrated": "Belum ditentukur",
+  "ui.3d_mouse_offer": "Menentukur tetikus 3D membetulkan paksi yang bertukar atau terbalik dan menetapkan kelajuan serta rasanya.",
+  "ui.3d_mouse_offer_never": "Jangan tunjuk lagi",
+  "ui.3d_mouse_offer_swap": "Tukar ke Hidraw (pemacu terus)",
+  "ui.3d_mouse_reading": "Bacaan",
+  "ui.3d_mouse_reset_axes": "Tetapkan semula penetapan paksi",
+  "ui.3d_mouse_reset_view": "Set semula paparan",
+  "ui.3d_mouse_restore": "Pulihkan lalai tetikus 3D",
+  "ui.3d_mouse_restore_ask": "Tetapkan semula tetapan tetikus 3D kepada lalai? Penentukuran dan pemetaan butang kekal.",
+  "ui.3d_mouse_section": "Tetikus 3D",
+  "ui.3d_mouse_show_in_view": "Tunjukkan tetikus 3D dalam paparan 3D",
+  "ui.3d_mouse_show_in_view_tip": "Gambar tetikus 3D anda di sudut kiri bawah, yang bergerak apabila anda menggerakkannya.",
+  "ui.3d_mouse_skip": "Peranti saya tidak boleh buat ini",
+  "ui.3d_mouse_skip_tip": "Langkau gerakan ini kedua-dua arah; penentukuran tidak menggunakannya.",
   "ui.3d_mouse_speed": "Kelajuan tetikus 3D",
+  "ui.3d_mouse_step_lift": "Angkat penutup ke atas, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_press": "Tekan penutup ke bawah, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_pull": "Tarik penutup ke arah anda, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_push": "Tolak penutup menjauhi anda, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_rest": "Alihkan tangan anda daripada penutup dan biarkan ia diam.",
+  "ui.3d_mouse_step_rest_trackball": "Alihkan tangan anda daripada bola dan biarkan ia diam.",
+  "ui.3d_mouse_step_ring_clockwise": "Putar gelang tatal ikut arah jam beberapa klik.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Putar gelang tatal lawan arah jam beberapa klik.",
+  "ui.3d_mouse_step_roll_away": "Gulingkan bola menjauhi anda beberapa kali, kemudian biarkan ia berhenti.",
+  "ui.3d_mouse_step_roll_left": "Gulingkan bola ke kiri beberapa kali, kemudian biarkan ia berhenti.",
+  "ui.3d_mouse_step_roll_right": "Gulingkan bola ke kanan beberapa kali, kemudian biarkan ia berhenti.",
+  "ui.3d_mouse_step_roll_toward": "Gulingkan bola ke arah anda beberapa kali, kemudian biarkan ia berhenti.",
+  "ui.3d_mouse_step_slide_left": "Luncurkan penutup ke kiri, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_slide_right": "Luncurkan penutup ke kanan, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_spin_clockwise": "Pusing bola ikut arah jam beberapa kali, kemudian biarkan ia berhenti.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Pusing bola lawan arah jam beberapa kali, kemudian biarkan ia berhenti.",
+  "ui.3d_mouse_step_tilt_away": "Condongkan bahagian atas penutup menjauhi anda (tepi terdekat naik), tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_tilt_left": "Condongkan penutup ke kiri (tepi kiri turun), tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_tilt_right": "Condongkan penutup ke kanan (tepi kanan turun), tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_tilt_toward": "Condongkan bahagian atas penutup ke arah anda (tepi terdekat turun), tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_touch": "Letakkan tangan anda pada penutup tanpa menolaknya.",
+  "ui.3d_mouse_step_twist_clockwise": "Pusing penutup ikut arah jam, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Pusing penutup lawan arah jam, tahan, kemudian lepaskan.",
+  "ui.3d_mouse_switch_cap": "Tentukur sebagai kembali ke tengah",
+  "ui.3d_mouse_switch_trackball": "Tentukur sebagai bola jejak",
+  "ui.3d_mouse_view_axis": "Paksi paparan",
+  "ui.3d_mouse_view_off": "Mati",
+  "ui.3d_mouse_view_off_tip": "Profil pemacu tetikus 3D mematikan paksi ini, jadi gerakannya tidak menggerakkan paparan. Memilih gerakan paksi lain di sini menukar kedua-duanya, dan gerakan itu tidak lagi menggerakkan paparan.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbit kiri / kanan",
+  "ui.3d_mouse_view_orbit_up_down": "Orbit atas / bawah",
+  "ui.3d_mouse_view_pan_sideways": "Pan kiri / kanan",
+  "ui.3d_mouse_view_pan_up_down": "Pan atas / bawah",
+  "ui.3d_mouse_view_roll": "Gelek",
+  "ui.3d_mouse_view_unmapped": "Paksi {n}",
+  "ui.3d_mouse_view_zoom": "Zum",
+  "ui.3d_mouse_waiting": "Menunggu pergerakan",
+  "ui.3d_mouse_wiggle": "Jika anda ada yang disambungkan, gerakkannya sedikit.",
   "ui.3d_sketch": "Lakaran 3D",
   "ui.activate": "Aktifkan",
   "ui.active_component": "Komponen aktif",
@@ -1351,6 +1460,7 @@
   "ui.blocked": "Disekat",
   "ui.bodies": "Jasad",
   "ui.bodies_all_if_none": "Jasad (semua jika tiada)",
+  "ui.bottom": "Bawah",
   "ui.box": "Kotak",
   "ui.break": "Putuskan",
   "ui.browser_bodies_one": "{count} jasad",
@@ -1503,6 +1613,7 @@
   "ui.grid_follows_view_hint": "Pandangan sisi guna grid satah tegak yang menghadapnya, bukan satah tanah",
   "ui.ground_shadow": "Bayang tanah",
   "ui.groupSelected": "Kumpulkan Pilihan",
+  "ui.hatch": "Lorek",
   "ui.heading_add_ins": "TAMBAHAN",
   "ui.heading_assemble": "PASANG",
   "ui.heading_box": "KOTAK",
@@ -1793,34 +1904,6 @@
   "ui.smooth_wheel_zoom": "Zum roda lancar",
   "ui.smooth_wheel_zoom_tip": "Matikan untuk mengezum serta-merta bagi setiap putaran roda tetikus, tanpa gerakan susulan",
   "ui.snap": "Lekap",
-  "ui.space_mouse_calibrate": "Tentukur…",
-  "ui.space_mouse_calibrate_tip": "Gerakkan penutup seperti yang diminta tetingkap, supaya SolidCraft mempelajari arah dan jarak setiap paksi tetikus 3D ini. Disimpan untuk tetikus 3D ini.",
-  "ui.space_mouse_calibrate_title": "Tentukur tetikus 3D",
-  "ui.space_mouse_calibrated": "Telah ditentukur",
-  "ui.space_mouse_calibration": "Penentukuran tetikus 3D",
-  "ui.space_mouse_calibration_done": "Selesai. Simpan untuk digunakan setiap kali tetikus 3D ini disambungkan.",
-  "ui.space_mouse_calibration_no_response": "Satu paksi hampir tidak bergerak, jadi tidak dapat ditentukur. Mulakan semula dan gerakkan penutup lebih jauh setiap kali.",
-  "ui.space_mouse_dead_zone": "Zon mati",
-  "ui.space_mouse_dead_zone_tip": "Sejauh mana penutup perlu bergerak sebelum pandangan bergerak, sebagai bahagian daripada julat penuhnya. Naikkan jika pandangan hanyut semasa penutup dalam keadaan rehat.",
-  "ui.space_mouse_forget": "Lupakan penentukuran",
-  "ui.space_mouse_hint": "Alih dan putar pandangan serentak; dalam lakaran, hanya sorot dan zum digunakan.",
-  "ui.space_mouse_navigate": "Navigasi dengan SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Tiada tetikus 3D ditemui",
-  "ui.space_mouse_not_calibrated": "Belum ditentukur",
-  "ui.space_mouse_reading": "Bacaan",
-  "ui.space_mouse_step_lift": "Angkat penutup ke atas, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_press": "Tekan penutup ke bawah, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_pull": "Tarik penutup ke arah anda, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_push": "Tolak penutup menjauhi anda, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_rest": "Alihkan tangan anda daripada penutup dan biarkan ia diam.",
-  "ui.space_mouse_step_slide_left": "Luncurkan penutup ke kiri, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_slide_right": "Luncurkan penutup ke kanan, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_tilt_back": "Condongkan penutup ke belakang (tepi depan naik), tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_tilt_forward": "Condongkan penutup ke hadapan (tepi depan turun), tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_tilt_left": "Condongkan penutup ke kiri (tepi kiri turun), tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_tilt_right": "Condongkan penutup ke kanan (tepi kanan turun), tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_twist_clockwise": "Pusing penutup ikut arah jam, tahan, kemudian lepaskan.",
-  "ui.space_mouse_step_twist_counterclockwise": "Pusing penutup lawan arah jam, tahan, kemudian lepaskan.",
   "ui.spacing": "Selang",
   "ui.spacing_2": "Selang 2",
   "ui.sphere": "Sfera",

assets/locales/nl.json

@@ -72,6 +72,7 @@
   "Choose…": "Kiezen…",
   "Circular": "Cirkelvormig",
   "Circumference": "Omtrek",
+  "Clockwise": "Met de klok mee",
   "Close draft": "Concept sluiten",
   "Collisions": "Botsingen",
   "Colour": "Kleur",
@@ -321,6 +322,7 @@
   "Search commands": "Opdrachten zoeken",
   "Search this library": "Deze bibliotheek doorzoeken",
   "Section": "Doorsnede",
+  "Section position": "Positie van de doorsnede",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Overige selecteren: houd de linkermuisknop stil op het model (of klik met rechts › Overige selecteren…) om alles onder de cursor weer te geven; klik opnieuw op dezelfde plek om het volgende item daar te selecteren. Dubbelklik met de middelste knop om naar Home te gaan (Voorkeuren › Navigatie).",
   "Select bodies (a face picks its body)": "Lichamen selecteren (een vlak kiest zijn lichaam)",
   "Select bodies or faces instead": "In plaats daarvan lichamen of vlakken selecteren",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft is gesloten voordat deze ontwerpen zijn opgeslagen. Hun laatste automatische opslag kan worden geopend.",
   "Specialise": "Specialiseren",
   "Speed": "Snelheid",
+  "Square": "Vierkant",
   "Stand it up": "Rechtop zetten",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Rechtop zetten: een kwartslag om X, als één Verplaatsen-kenmerk dat u ongedaan kunt maken.",
   "Stand this part up?": "Dit onderdeel rechtop zetten?",
+  "Start angle": "Beginhoek",
   "Start bulge": "Beginbolling",
   "Start continuity": "Begincontinuïteit",
   "Step": "Stap",
@@ -411,6 +415,7 @@
   "angle, height": "hoek, hoogte",
   "appearance.dielectric_ior": "Diëlektrische IOR",
   "appearance.metallic": "Metaalachtig",
+  "appearance.only_available": "Alleen beschikbare verschijningen",
   "appearance.pbr_help": "Bekijk dit oppervlak in Render of een product-PNG. Geen breking of transmissie.",
   "appearance.pbr_opaque": "Ondoorzichtige PBR",
   "appearance.roughness": "Ruwheid",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "STEP invoegen",
   "cmd.file_save_mesh": "Opslaan als mesh",
   "cmd.file_slicers": "Geïnstalleerde slicers",
+  "cmd.frame_member": "Constructiedeel",
+  "cmd.frame_profile_insert": "Profiel invoegen",
+  "cmd.frame_profile_list": "Profielbibliotheek",
+  "cmd.frame_profile_properties": "Profieleigenschappen",
   "cmd.inspect_accessibility": "Toegankelijkheidsanalyse",
   "cmd.inspect_center_of_mass": "Zwaartepunt",
   "cmd.inspect_clearance": "Speling",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Nieuw fysiek materiaal",
   "cmd.material_delete": "Fysiek materiaal verwijderen",
   "cmd.material_edit": "Fysiek materiaal bewerken",
+  "cmd.material_inspect": "Fysiek materiaal inspecteren",
   "cmd.material_list": "Materialen weergeven",
   "cmd.material_properties_directional": "Richtingsafhankelijke elasticiteitsmodulus",
   "cmd.material_properties_validate": "Gegevens fysiek materiaal valideren",
@@ -1120,7 +1130,50 @@
   "trace.stopped_by_contact": "Eindigt bij monster {sample}: {a} zou door {b} heen gaan",
   "trace.stopped_by_loop": "Eindigt bij monster {sample}: de lus via {joint} kan niet verder sluiten",
   "ui.1_degree_of_freedom": "1 vrijheidsgraad",
+  "ui.3d_mouse_calibrate": "Kalibreren…",
+  "ui.3d_mouse_calibrate_tip": "Beweeg de dop zoals het venster vraagt, zodat SolidCraft leert welke kant elke as van deze 3D-muis op gaat en hoe ver. Opgeslagen voor deze 3D-muis.",
+  "ui.3d_mouse_calibrate_title": "3D-muis kalibreren",
+  "ui.3d_mouse_calibrate_wait": "Beweeg de 3D-muis één keer, zodat SolidCraft hem ziet.",
+  "ui.3d_mouse_calibrated": "Gekalibreerd",
+  "ui.3d_mouse_calibration": "Kalibratie van 3D-muis",
+  "ui.3d_mouse_calibration_done": "Gereed. Sla op om het te gebruiken wanneer deze 3D-muis is aangesloten.",
+  "ui.3d_mouse_calibration_no_response": "Een as bewoog nauwelijks en kan dus niet worden gekalibreerd. Begin opnieuw en beweeg de dop telkens verder.",
+  "ui.3d_mouse_circles_help": "De cirkels tonen wat het apparaat na kalibratie stuurt. Het testmodel toont wat de weergave ermee doet, na omkeren, snelheid en asindeling.",
+  "ui.3d_mouse_dead_zone": "Dode zone",
+  "ui.3d_mouse_dead_zone_tip": "Hoe ver de dop moet bewegen voordat de weergave dat doet, als aandeel van de volledige slag. Verhoog dit als de weergave afdrijft terwijl de dop in rust is.",
+  "ui.3d_mouse_denied": "SolidCraft ziet een 3D-muis maar mag hem niet lezen. Zie de installatienotities voor de 3D-muis voor de udev-regel.",
+  "ui.3d_mouse_denied_short": "Gevonden, maar niet leesbaar",
+  "ui.3d_mouse_driver_fallback": "Voorlopig via spacenavd gelezen: het apparaat zelf kon niet worden geopend.",
+  "ui.3d_mouse_forget": "Kalibratie vergeten",
+  "ui.3d_mouse_ghost_left_viewport": "Viewport links",
+  "ui.3d_mouse_ghost_left_window": "Venster links",
+  "ui.3d_mouse_ghost_position": "Positie",
+  "ui.3d_mouse_ghost_right_viewport": "Viewport rechts",
+  "ui.3d_mouse_hint": "Verplaats en roteer de weergave samen; schetsen gebruiken alleen pannen en zoomen.",
+  "ui.3d_mouse_navigate": "Navigeren met de 3D-muis",
+  "ui.3d_mouse_none": "Geen 3D-muis gevonden",
+  "ui.3d_mouse_not_calibrated": "Niet gekalibreerd",
+  "ui.3d_mouse_offer": "Je 3D-muis kalibreren verhelpt verwisselde of omgekeerde assen en stelt snelheid en gevoel in.",
+  "ui.3d_mouse_offer_never": "Niet meer tonen",
+  "ui.3d_mouse_offer_swap": "Naar Hidraw wisselen (direct)",
+  "ui.3d_mouse_reading": "Uitlezen",
+  "ui.3d_mouse_reset_view": "Weergave resetten",
+  "ui.3d_mouse_restore": "3D-muis standaardwaarden herstellen",
+  "ui.3d_mouse_restore_ask": "De 3D-muisinstellingen terugzetten naar de standaardwaarden? Je kalibratie en knoppentoewijzing blijven staan.",
   "ui.3d_mouse_speed": "Snelheid van 3D-muis",
+  "ui.3d_mouse_step_lift": "Til de dop omhoog, houd vast en laat dan los.",
+  "ui.3d_mouse_step_press": "Druk de dop omlaag, houd vast en laat dan los.",
+  "ui.3d_mouse_step_pull": "Trek de dop naar u toe, houd vast en laat dan los.",
+  "ui.3d_mouse_step_push": "Duw de dop van u af, houd vast en laat dan los.",
+  "ui.3d_mouse_step_rest": "Haal uw hand van de dop en laat hem stilstaan.",
+  "ui.3d_mouse_step_slide_left": "Schuif de dop naar links, houd vast en laat dan los.",
+  "ui.3d_mouse_step_slide_right": "Schuif de dop naar rechts, houd vast en laat dan los.",
+  "ui.3d_mouse_step_tilt_left": "Kantel de dop naar links (linkerrand omlaag), houd vast en laat dan los.",
+  "ui.3d_mouse_step_tilt_right": "Kantel de dop naar rechts (rechterrand omlaag), houd vast en laat dan los.",
+  "ui.3d_mouse_step_twist_clockwise": "Draai de dop met de klok mee, houd vast en laat dan los.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Draai de dop tegen de klok in, houd vast en laat dan los.",
+  "ui.3d_mouse_waiting": "Wacht op beweging",
+  "ui.3d_mouse_wiggle": "Als je er een hebt aangesloten, beweeg hem even.",
   "ui.3d_sketch": "3D-schets",
   "ui.activate": "Activeren",
   "ui.active_component": "Actief component",
@@ -1502,6 +1555,7 @@
   "ui.grid_follows_view_hint": "Zijaanzichten tonen het raster op het rechtopstaande vlak dat naar hen toe gericht is in plaats van op de grond",
   "ui.ground_shadow": "Grondschaduw",
   "ui.groupSelected": "Selectie groeperen",
+  "ui.hatch": "Arcering",
   "ui.heading_add_ins": "INVOEGMODULES",
   "ui.heading_assemble": "SAMENSTELLEN",
   "ui.heading_box": "KUB",
@@ -1792,34 +1846,6 @@
   "ui.smooth_wheel_zoom": "Vloeiend zoomen met wiel",
   "ui.smooth_wheel_zoom_tip": "Uitschakelen om elke wielgebeurtenis direct toe te passen, zonder uitloop",
   "ui.snap": "Snap",
-  "ui.space_mouse_calibrate": "Kalibreren…",
-  "ui.space_mouse_calibrate_tip": "Beweeg de dop zoals het venster vraagt, zodat SolidCraft leert welke kant elke as van deze 3D-muis op gaat en hoe ver. Opgeslagen voor deze 3D-muis.",
-  "ui.space_mouse_calibrate_title": "3D-muis kalibreren",
-  "ui.space_mouse_calibrated": "Gekalibreerd",
-  "ui.space_mouse_calibration": "Kalibratie van 3D-muis",
-  "ui.space_mouse_calibration_done": "Gereed. Sla op om het te gebruiken wanneer deze 3D-muis is aangesloten.",
-  "ui.space_mouse_calibration_no_response": "Een as bewoog nauwelijks en kan dus niet worden gekalibreerd. Begin opnieuw en beweeg de dop telkens verder.",
-  "ui.space_mouse_dead_zone": "Dode zone",
-  "ui.space_mouse_dead_zone_tip": "Hoe ver de dop moet bewegen voordat de weergave dat doet, als aandeel van de volledige slag. Verhoog dit als de weergave afdrijft terwijl de dop in rust is.",
-  "ui.space_mouse_forget": "Kalibratie vergeten",
-  "ui.space_mouse_hint": "Verplaats en roteer de weergave samen; schetsen gebruiken alleen pannen en zoomen.",
-  "ui.space_mouse_navigate": "Navigeren met SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Geen 3D-muis gevonden",
-  "ui.space_mouse_not_calibrated": "Niet gekalibreerd",
-  "ui.space_mouse_reading": "Uitlezen",
-  "ui.space_mouse_step_lift": "Til de dop omhoog, houd vast en laat dan los.",
-  "ui.space_mouse_step_press": "Druk de dop omlaag, houd vast en laat dan los.",
-  "ui.space_mouse_step_pull": "Trek de dop naar u toe, houd vast en laat dan los.",
-  "ui.space_mouse_step_push": "Duw de dop van u af, houd vast en laat dan los.",
-  "ui.space_mouse_step_rest": "Haal uw hand van de dop en laat hem stilstaan.",
-  "ui.space_mouse_step_slide_left": "Schuif de dop naar links, houd vast en laat dan los.",
-  "ui.space_mouse_step_slide_right": "Schuif de dop naar rechts, houd vast en laat dan los.",
-  "ui.space_mouse_step_tilt_back": "Kantel de dop naar achteren (voorrand omhoog), houd vast en laat dan los.",
-  "ui.space_mouse_step_tilt_forward": "Kantel de dop naar voren (voorrand omlaag), houd vast en laat dan los.",
-  "ui.space_mouse_step_tilt_left": "Kantel de dop naar links (linkerrand omlaag), houd vast en laat dan los.",
-  "ui.space_mouse_step_tilt_right": "Kantel de dop naar rechts (rechterrand omlaag), houd vast en laat dan los.",
-  "ui.space_mouse_step_twist_clockwise": "Draai de dop met de klok mee, houd vast en laat dan los.",
-  "ui.space_mouse_step_twist_counterclockwise": "Draai de dop tegen de klok in, houd vast en laat dan los.",
   "ui.spacing": "Tussenruimte",
   "ui.spacing_2": "Tussenruimte 2",
   "ui.sphere": "Bol",

assets/locales/pl.json

@@ -73,6 +73,7 @@
   "Choose…": "Wybierz…",
   "Circular": "Kołowy",
   "Circumference": "Obwód",
+  "Clockwise": "Zgodnie z ruchem wskazówek zegara",
   "Close draft": "Zamknij szkic zgłoszenia",
   "Collisions": "Kolizje",
   "Colour": "Kolor",
@@ -339,6 +340,7 @@
   "Search commands": "Szukaj poleceń",
   "Search this library": "Przeszukaj tę bibliotekę",
   "Section": "Przekrój",
+  "Section position": "Położenie przekroju",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Wybierz inny: przytrzymaj nieruchomo lewy przycisk na modelu (lub prawy przycisk › Wybierz inny…), aby wyświetlić wszystko pod kursorem; kliknij ponownie w tym samym miejscu, aby zaznaczyć kolejny obiekt. Dwukrotne kliknięcie środkowym przyciskiem przechodzi do widoku głównego (Preferencje › Nawigacja).",
   "Select bodies (a face picks its body)": "Zaznacz bryły (ściana wybiera swoją bryłę)",
   "Select bodies or faces instead": "Zamiast tego zaznacz bryły lub ściany",
@@ -362,9 +364,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft zamknął się, zanim te projekty zostały zapisane. Można otworzyć ich ostatni autozapis.",
   "Specialise": "Uszczegółów",
   "Speed": "Prędkość",
+  "Square": "Kwadrat",
   "Stand it up": "Postaw",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Postaw: obrót o ćwierć obrotu wokół osi X, jako jedna funkcja Przesuń, którą można cofnąć.",
   "Stand this part up?": "Postawić tę część?",
+  "Start angle": "Kąt początkowy",
   "Start bulge": "Wybrzuszenie początku",
   "Start continuity": "Ciągłość początku",
   "Step": "Krok",
@@ -460,6 +464,7 @@
   "angle, height": "kąt, wysokość",
   "appearance.dielectric_ior": "Współczynnik załamania dielektryka (IOR)",
   "appearance.metallic": "Metaliczność",
+  "appearance.only_available": "Tylko dostępne wyglądy",
   "appearance.pbr_help": "Zobacz tę powierzchnię w renderowaniu lub w obrazie PNG produktu. Bez załamania i przepuszczania światła.",
   "appearance.pbr_opaque": "Nieprzezroczysty PBR",
   "appearance.roughness": "Chropowatość",
@@ -578,6 +583,10 @@
   "cmd.file_insert_step": "Wstaw STEP",
   "cmd.file_save_mesh": "Zapisz jako siatkę",
   "cmd.file_slicers": "Zainstalowane slicery",
+  "cmd.frame_member": "Element ramy",
+  "cmd.frame_profile_insert": "Wstaw profil",
+  "cmd.frame_profile_list": "Biblioteka profili",
+  "cmd.frame_profile_properties": "Właściwości profilu",
   "cmd.inspect_accessibility": "Analiza dostępności",
   "cmd.inspect_center_of_mass": "Środek masy",
   "cmd.inspect_clearance": "Prześwit",
@@ -617,6 +626,7 @@
   "cmd.material_create": "Nowy materiał fizyczny",
   "cmd.material_delete": "Usuń materiał fizyczny",
   "cmd.material_edit": "Edytuj materiał fizyczny",
+  "cmd.material_inspect": "Sprawdź materiał fizyczny",
   "cmd.material_list": "Lista materiałów",
   "cmd.material_properties_directional": "Kierunkowy moduł sprężystości",
   "cmd.material_properties_validate": "Sprawdź dane materiału fizycznego",
@@ -1245,6 +1255,8 @@
   "settings.msaa_applies_on_restart": "Wygładzanie krawędzi zadziała po ponownym uruchomieniu SolidCraft",
   "settings.msaa_reset": "{setting}: {requested}× nie jest obsługiwane przez to urządzenie graficzne; ustawiono {reset}× (obsługiwane: {supported}).",
   "settings.msaa_unsupported": "Nieobsługiwane przez to urządzenie graficzne",
+  "settings.reference_geometry_through_bodies": "Pokaż geometrię odniesienia przez bryły",
+  "settings.reference_geometry_through_bodies_help": "Rysuj kontury nieaktywnych szkiców i płaszczyzny odniesienia na cieniowanych bryłach",
   "settings.reset_intro": "Te ustawienia nie działają na tym komputerze i uniemożliwiłyby uruchomienie SolidCraft, więc zostały zmienione:",
   "settings.reset_title": "Zmieniono ustawienia",
   "settings.supersampling_note": "Rysuje widok w wyższej rozdzielczości i go zmniejsza: gładsze krawędzie, linie i siatka na ekranach poniżej 4K. Kosztuje czas GPU: ok. 2,25× więcej pikseli przy 1,5× i 4× przy 2×.",
@@ -1303,7 +1315,106 @@
   "trace.stopped_by_contact": "Kończy się na próbce {sample}: {a} przeszedłby przez {b}",
   "trace.stopped_by_loop": "Kończy się na próbce {sample}: pętla przez {joint} nie może się bardziej zamknąć",
   "ui.1_degree_of_freedom": "1 stopień swobody",
+  "ui.3d_mouse_axes_reassigned": "Osie są przypisane na nowo w Ustawieniach i to nadal obowiązuje razem z tą kalibracją.",
+  "ui.3d_mouse_button": "Przycisk {number}",
+  "ui.3d_mouse_button_nothing": "Nic",
+  "ui.3d_mouse_button_settings": "Ustawienia myszy 3D",
+  "ui.3d_mouse_buttons": "Przyciski",
+  "ui.3d_mouse_buttons_hint": "Naciśnij przycisk na myszy 3D, aby go tu znaleźć, a potem wybierz, co ma robić.",
+  "ui.3d_mouse_buttons_no_device": "Podłącz mysz 3D, aby ustawić, co robią jej przyciski.",
+  "ui.3d_mouse_buttons_reset": "Przywróć domyślne przyciski",
+  "ui.3d_mouse_calibrate": "Kalibruj…",
+  "ui.3d_mouse_calibrate_tip": "Przesuwaj nakładkę zgodnie z poleceniami okna, aby SolidCraft nauczył się kierunku i zakresu każdej osi tej myszy 3D. Zapisywane dla tej myszy 3D.",
+  "ui.3d_mouse_calibrate_title": "Kalibracja myszy 3D",
+  "ui.3d_mouse_calibrate_wait": "Rusz raz myszą 3D, aby SolidCraft ją zobaczył.",
+  "ui.3d_mouse_calibrated": "Skalibrowano",
+  "ui.3d_mouse_calibration": "Kalibracja myszy 3D",
+  "ui.3d_mouse_calibration_done": "Gotowe. Zapisz, aby używać kalibracji po każdym podłączeniu tej myszy 3D.",
+  "ui.3d_mouse_calibration_no_response": "Jedna oś prawie się nie poruszyła, więc nie można jej skalibrować. Zacznij od nowa i za każdym razem wychylaj nakładkę mocniej.",
+  "ui.3d_mouse_circles_help": "Koła pokazują, co urządzenie wysyła po kalibracji. Model testowy pokazuje, co widok z tym robi po odwróceniu, szybkości i przypisaniu osi.",
+  "ui.3d_mouse_dead_zone": "Strefa martwa",
+  "ui.3d_mouse_dead_zone_tip": "O ile trzeba wychylić nakładkę, zanim widok się poruszy, jako część pełnego wychylenia. Zwiększ, jeśli widok dryfuje przy nieruszanej nakładce.",
+  "ui.3d_mouse_denied": "SolidCraft widzi mysz 3D, ale nie ma pozwolenia, by ją odczytać. Regułę udev opisują uwagi o konfiguracji myszy 3D.",
+  "ui.3d_mouse_denied_short": "Znaleziono, ale nie można odczytać",
+  "ui.3d_mouse_driven_by": "Który skalibrowany ruch urządzenia steruje tą osią. Wybranie ruchu używanego już przez inną oś zamienia je miejscami.",
+  "ui.3d_mouse_driven_by_label": "sterowana przez",
+  "ui.3d_mouse_driver": "Sterownik myszy 3D",
+  "ui.3d_mouse_driver_auto": "Automatyczny",
+  "ui.3d_mouse_driver_direct": "Bezpośredni (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Na razie odczyt przez spacenavd: samego urządzenia nie udało się otworzyć.",
+  "ui.3d_mouse_driver_only_direct": "Urządzenie jest czytane bezpośrednio; spacenavd nie działa",
+  "ui.3d_mouse_driver_only_spacenavd": "Odczyt przez spacenavd, jedyna dostępna droga",
+  "ui.3d_mouse_forget": "Zapomnij kalibrację",
+  "ui.3d_mouse_ghost_left_viewport": "Lewy widok",
+  "ui.3d_mouse_ghost_left_window": "Lewe okno",
+  "ui.3d_mouse_ghost_position": "Położenie",
+  "ui.3d_mouse_ghost_right_viewport": "Prawy widok",
+  "ui.3d_mouse_hint": "Przesuwaj i obracaj widok jednocześnie; w szkicach działa tylko przesuwanie i powiększanie.",
+  "ui.3d_mouse_kind_cap": "Powrót do środka",
+  "ui.3d_mouse_kind_question": "Jaki to rodzaj myszy 3D?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "Odczyt zostaje, dopóki trzymasz, jak w urządzeniu typu „Powrót do środka”.",
+  "ui.3d_mouse_looks_like_trackball": "Odczyt wraca, gdy tylko przestajesz ruszać, jak w trackballu.",
+  "ui.3d_mouse_motion_rotation_x": "Obrót X",
+  "ui.3d_mouse_motion_rotation_y": "Obrót Y",
+  "ui.3d_mouse_motion_rotation_z": "Obrót Z",
+  "ui.3d_mouse_motion_translation_x": "Przesunięcie X",
+  "ui.3d_mouse_motion_translation_y": "Przesunięcie Y",
+  "ui.3d_mouse_motion_translation_z": "Przesunięcie Z",
+  "ui.3d_mouse_navigate": "Nawiguj za pomocą myszy 3D",
+  "ui.3d_mouse_none": "Nie znaleziono myszy 3D",
+  "ui.3d_mouse_not_calibrated": "Nieskalibrowano",
+  "ui.3d_mouse_offer": "Kalibracja myszy 3D naprawia zamienione lub odwrócone osie oraz ustawia jej szybkość i odczucie.",
+  "ui.3d_mouse_offer_never": "Nie pokazuj więcej",
+  "ui.3d_mouse_offer_swap": "Przełącz na Hidraw (sterownik bezpośredni)",
+  "ui.3d_mouse_reading": "Odczyt",
+  "ui.3d_mouse_reset_axes": "Przywróć przypisanie osi",
+  "ui.3d_mouse_reset_view": "Resetuj widok",
+  "ui.3d_mouse_restore": "Przywróć ustawienia myszy 3D",
+  "ui.3d_mouse_restore_ask": "Przywrócić domyślne ustawienia myszy 3D? Kalibracja i przypisanie przycisków zostają.",
+  "ui.3d_mouse_section": "Mysz 3D",
+  "ui.3d_mouse_show_in_view": "Pokazuj mysz 3D w widoku 3D",
+  "ui.3d_mouse_show_in_view_tip": "Obraz twojej myszy 3D w lewym dolnym rogu, który porusza się razem z nią.",
+  "ui.3d_mouse_skip": "Moje urządzenie tego nie potrafi",
+  "ui.3d_mouse_skip_tip": "Pomija ten ruch w obu kierunkach; kalibracja go nie uwzględnia.",
   "ui.3d_mouse_speed": "Czułość myszy 3D",
+  "ui.3d_mouse_step_lift": "Unieś nakładkę, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_press": "Wciśnij nakładkę w dół, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_pull": "Pociągnij nakładkę do siebie, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_push": "Popchnij nakładkę od siebie, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_rest": "Zdejmij dłoń z nakładki i nie ruszaj jej.",
+  "ui.3d_mouse_step_rest_trackball": "Zdejmij dłoń z kulki i nie ruszaj jej.",
+  "ui.3d_mouse_step_ring_clockwise": "Obróć pierścień przewijania o kilka kliknięć zgodnie z ruchem wskazówek zegara.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Obróć pierścień przewijania o kilka kliknięć przeciwnie do ruchu wskazówek zegara.",
+  "ui.3d_mouse_step_roll_away": "Potocz kulkę kilka razy od siebie, a potem pozwól jej się zatrzymać.",
+  "ui.3d_mouse_step_roll_left": "Potocz kulkę kilka razy w lewo, a potem pozwól jej się zatrzymać.",
+  "ui.3d_mouse_step_roll_right": "Potocz kulkę kilka razy w prawo, a potem pozwól jej się zatrzymać.",
+  "ui.3d_mouse_step_roll_toward": "Potocz kulkę kilka razy do siebie, a potem pozwól jej się zatrzymać.",
+  "ui.3d_mouse_step_slide_left": "Przesuń nakładkę w lewo, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_slide_right": "Przesuń nakładkę w prawo, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_spin_clockwise": "Zakręć kulką kilka razy zgodnie z ruchem wskazówek zegara, a potem pozwól jej się zatrzymać.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Zakręć kulką kilka razy przeciwnie do ruchu wskazówek zegara, a potem pozwól jej się zatrzymać.",
+  "ui.3d_mouse_step_tilt_away": "Przechyl górę nakładki od siebie (krawędź najbliżej ciebie idzie w górę), przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_tilt_left": "Przechyl nakładkę w lewo (lewa krawędź w dół), przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_tilt_right": "Przechyl nakładkę w prawo (prawa krawędź w dół), przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_tilt_toward": "Przechyl górę nakładki do siebie (krawędź najbliżej ciebie idzie w dół), przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_touch": "Połóż dłoń na nakładce, nie naciskając jej.",
+  "ui.3d_mouse_step_twist_clockwise": "Obróć nakładkę zgodnie z ruchem wskazówek zegara, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Obróć nakładkę przeciwnie do ruchu wskazówek zegara, przytrzymaj, a następnie puść.",
+  "ui.3d_mouse_switch_cap": "Kalibruj jako powrót do środka",
+  "ui.3d_mouse_switch_trackball": "Kalibruj jako trackball",
+  "ui.3d_mouse_view_axis": "Oś widoku",
+  "ui.3d_mouse_view_off": "Wyłączona",
+  "ui.3d_mouse_view_off_tip": "Profil sterownika myszy 3D wyłącza tę oś, więc jej ruch nie porusza widokiem. Wybranie tu ruchu innej osi zamienia je miejscami, a ten ruch przestaje poruszać widokiem.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbita w lewo / prawo",
+  "ui.3d_mouse_view_orbit_up_down": "Orbita w górę / dół",
+  "ui.3d_mouse_view_pan_sideways": "Przesuwanie w lewo / prawo",
+  "ui.3d_mouse_view_pan_up_down": "Przesuwanie w górę / dół",
+  "ui.3d_mouse_view_roll": "Przechył",
+  "ui.3d_mouse_view_unmapped": "Oś {n}",
+  "ui.3d_mouse_view_zoom": "Powiększenie",
+  "ui.3d_mouse_waiting": "Czekam na ruch",
+  "ui.3d_mouse_wiggle": "Jeśli masz podłączoną, poruszaj nią chwilę.",
   "ui.3d_sketch": "Szkic 3D",
   "ui.activate": "Aktywuj",
   "ui.active_component": "Aktywny komponent",
@@ -1535,6 +1646,7 @@
   "ui.blocked": "Zablokowane",
   "ui.bodies": "Bryły",
   "ui.bodies_all_if_none": "Bryły (wszystkie, jeśli brak)",
+  "ui.bottom": "Dół",
   "ui.box": "Prostopadłościan",
   "ui.break": "Podziel",
   "ui.browser_bodies_one": "{count} bryła",
@@ -1687,6 +1799,7 @@
   "ui.grid_follows_view_hint": "Widoki boczne pokazują siatkę na pionowej płaszczyźnie zwróconej do nich zamiast na podłożu",
   "ui.ground_shadow": "Cień na podłożu",
   "ui.groupSelected": "Grupuj zaznaczone",
+  "ui.hatch": "Kreskowanie",
   "ui.heading_add_ins": "DODATKI",
   "ui.heading_assemble": "ZŁOŻENIE",
   "ui.heading_box": "PROSTOPADŁOŚCIAN",
@@ -1984,59 +2097,6 @@
   "ui.smooth_wheel_zoom": "Płynne powiększanie kółkiem",
   "ui.smooth_wheel_zoom_tip": "Wyłącz, aby każdy ruch kółka działał od razu, bez wygładzania",
   "ui.snap": "Przyciąganie",
-  "ui.space_mouse_axes_reassigned": "Osie są przypisane inaczej w Preferencjach i to przypisanie nadal działa niezależnie od tej kalibracji.",
-  "ui.space_mouse_calibrate": "Kalibruj…",
-  "ui.space_mouse_calibrate_tip": "Przesuwaj nakładkę zgodnie z poleceniami okna, aby SolidCraft nauczył się kierunku i zakresu każdej osi tej myszy 3D. Zapisywane dla tej myszy 3D.",
-  "ui.space_mouse_calibrate_title": "Kalibracja myszy 3D",
-  "ui.space_mouse_calibrated": "Skalibrowano",
-  "ui.space_mouse_calibration": "Kalibracja myszy 3D",
-  "ui.space_mouse_calibration_done": "Gotowe. Zapisz, aby używać kalibracji po każdym podłączeniu tej myszy 3D.",
-  "ui.space_mouse_calibration_no_response": "Jedna oś prawie się nie poruszyła, więc nie można jej skalibrować. Zacznij od nowa i za każdym razem wychylaj nakładkę mocniej.",
-  "ui.space_mouse_dead_zone": "Strefa martwa",
-  "ui.space_mouse_dead_zone_tip": "O ile trzeba wychylić nakładkę, zanim widok się poruszy, jako część pełnego wychylenia. Zwiększ, jeśli widok dryfuje przy nieruszanej nakładce.",
-  "ui.space_mouse_driven_by": "Który skalibrowany ruch urządzenia steruje tą osią. Wybranie ruchu używanego już przez inną oś zamienia je miejscami.",
-  "ui.space_mouse_driven_by_label": "sterowana przez",
-  "ui.space_mouse_driver": "Sterownik myszy 3D",
-  "ui.space_mouse_driver_auto": "Automatycznie",
-  "ui.space_mouse_driver_direct": "Bezpośrednio (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Bezpośredni odczyt urządzenia; spacenavd nie działa",
-  "ui.space_mouse_driver_only_spacenavd": "Odczyt przez spacenavd, jedyny dostępny sposób",
-  "ui.space_mouse_forget": "Zapomnij kalibrację",
-  "ui.space_mouse_hint": "Przesuwaj i obracaj widok jednocześnie; w szkicach działa tylko przesuwanie i powiększanie.",
-  "ui.space_mouse_motion_rotation_x": "Obrót X",
-  "ui.space_mouse_motion_rotation_y": "Obrót Y",
-  "ui.space_mouse_motion_rotation_z": "Obrót Z",
-  "ui.space_mouse_motion_translation_x": "Przesunięcie X",
-  "ui.space_mouse_motion_translation_y": "Przesunięcie Y",
-  "ui.space_mouse_motion_translation_z": "Przesunięcie Z",
-  "ui.space_mouse_navigate": "Nawiguj za pomocą SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Nie znaleziono myszy 3D",
-  "ui.space_mouse_not_calibrated": "Nieskalibrowano",
-  "ui.space_mouse_reading": "Odczyt",
-  "ui.space_mouse_reset_axes": "Resetuj przypisanie osi",
-  "ui.space_mouse_step_lift": "Unieś nakładkę, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_press": "Wciśnij nakładkę w dół, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_pull": "Pociągnij nakładkę do siebie, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_push": "Popchnij nakładkę od siebie, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_rest": "Zdejmij dłoń z nakładki i nie ruszaj jej.",
-  "ui.space_mouse_step_slide_left": "Przesuń nakładkę w lewo, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_slide_right": "Przesuń nakładkę w prawo, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_tilt_back": "Przechyl nakładkę do tyłu (przednia krawędź w górę), przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_tilt_forward": "Przechyl nakładkę do przodu (przednia krawędź w dół), przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_tilt_left": "Przechyl nakładkę w lewo (lewa krawędź w dół), przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_tilt_right": "Przechyl nakładkę w prawo (prawa krawędź w dół), przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_twist_clockwise": "Obróć nakładkę zgodnie z ruchem wskazówek zegara, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_step_twist_counterclockwise": "Obróć nakładkę przeciwnie do ruchu wskazówek zegara, przytrzymaj, a następnie puść.",
-  "ui.space_mouse_view_axis": "Oś widoku",
-  "ui.space_mouse_view_off": "Wyłączona",
-  "ui.space_mouse_view_off_tip": "Profil sterownika myszy 3D wyłącza tę oś, więc jej ruch nie porusza widokiem. Wybranie tutaj ruchu innej osi zamienia je miejscami, a ten ruch przestaje poruszać widokiem.",
-  "ui.space_mouse_view_orbit_sideways": "Obracanie w lewo / w prawo",
-  "ui.space_mouse_view_orbit_up_down": "Obracanie w górę / w dół",
-  "ui.space_mouse_view_pan_sideways": "Przesuwanie w lewo / w prawo",
-  "ui.space_mouse_view_pan_up_down": "Przesuwanie w górę / w dół",
-  "ui.space_mouse_view_roll": "Przechylenie",
-  "ui.space_mouse_view_unmapped": "Oś {n}",
-  "ui.space_mouse_view_zoom": "Powiększanie",
   "ui.spacing": "Odstęp",
   "ui.spacing_2": "Odstęp 2",
   "ui.sphere": "Sfera",

assets/locales/pt-BR.json

@@ -72,6 +72,7 @@
   "Choose…": "Escolher…",
   "Circular": "Circular",
   "Circumference": "Circunferência",
+  "Clockwise": "Horário",
   "Close draft": "Fechar rascunho",
   "Collisions": "Colisões",
   "Colour": "Cor",
@@ -322,6 +323,7 @@
   "Search commands": "Pesquisar comandos",
   "Search this library": "Pesquisar nesta biblioteca",
   "Section": "Seção",
+  "Section position": "Posição da seção",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Selecionar outro: mantenha o botão esquerdo parado sobre o modelo (ou clique com o botão direito › Selecionar outro…) para listar tudo sob o cursor; clique de novo no mesmo ponto para selecionar o próximo item ali. Clique duas vezes com o botão do meio para ir ao Início (Preferências › Navegação).",
   "Select bodies (a face picks its body)": "Selecione corpos (uma face seleciona seu corpo)",
   "Select bodies or faces instead": "Selecionar corpos ou faces em vez disso",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "O SolidCraft fechou antes de estes projetos serem salvos. O último salvamento automático deles pode ser aberto.",
   "Specialise": "Especializar",
   "Speed": "Velocidade",
+  "Square": "Quadrado",
   "Stand it up": "Colocar em pé",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Colocar em pé: um quarto de volta em torno de X, como um recurso Mover que pode ser desfeito.",
   "Stand this part up?": "Colocar esta peça em pé?",
+  "Start angle": "Ângulo inicial",
   "Start bulge": "Abaulamento inicial",
   "Start continuity": "Continuidade inicial",
   "Step": "Passo",
@@ -412,6 +416,7 @@
   "angle, height": "ângulo, altura",
   "appearance.dielectric_ior": "IOR dielétrico",
   "appearance.metallic": "Metálico",
+  "appearance.only_available": "Somente aparências disponíveis",
   "appearance.pbr_help": "Veja esta superfície em Renderizar ou em um PNG de produto. Sem refração nem transmissão.",
   "appearance.pbr_opaque": "PBR opaco",
   "appearance.roughness": "Rugosidade",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Inserir STEP",
   "cmd.file_save_mesh": "Salvar como malha",
   "cmd.file_slicers": "Fatiadores instalados",
+  "cmd.frame_member": "Membro estrutural",
+  "cmd.frame_profile_insert": "Inserir perfil",
+  "cmd.frame_profile_list": "Biblioteca de perfis",
+  "cmd.frame_profile_properties": "Propriedades do perfil",
   "cmd.inspect_accessibility": "Análise de acessibilidade",
   "cmd.inspect_center_of_mass": "Centro de massa",
   "cmd.inspect_clearance": "Folga",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Novo material físico",
   "cmd.material_delete": "Excluir material físico",
   "cmd.material_edit": "Editar material físico",
+  "cmd.material_inspect": "Inspecionar material físico",
   "cmd.material_list": "Listar materiais",
   "cmd.material_properties_directional": "Módulo de elasticidade direcional",
   "cmd.material_properties_validate": "Validar dados do material físico",
@@ -755,12 +765,19 @@
   "cmd.timeline_suppress": "Suprimir recurso",
   "cmd.view_ambient_occlusion": "Oclusão de ambiente",
   "cmd.view_apply": "Restaurar vista nomeada",
+  "cmd.view_back": "Vista traseira",
+  "cmd.view_bottom": "Vista inferior",
   "cmd.view_delete": "Excluir vista nomeada",
+  "cmd.view_front": "Vista frontal",
   "cmd.view_graphics_preset": "Predefinição gráfica",
+  "cmd.view_isometric": "Vista isométrica",
+  "cmd.view_left": "Vista esquerda",
   "cmd.view_list": "Listar vistas nomeadas",
   "cmd.view_navigate": "Navegar na vista",
   "cmd.view_rename": "Renomear vista nomeada",
+  "cmd.view_right": "Vista direita",
   "cmd.view_save": "Nova vista nomeada",
+  "cmd.view_top": "Vista superior",
   "color.copy": "Clique para copiar os valores da cor",
   "color.edit": "Clique para editar a cor",
   "color.gamma": "Mostrando valores de cor no espaço gama 0-255",
@@ -1121,7 +1138,106 @@
   "trace.stopped_by_contact": "Termina na amostra {sample}: {a} atravessaria {b}",
   "trace.stopped_by_loop": "Termina na amostra {sample}: o laço por {joint} não pode fechar mais",
   "ui.1_degree_of_freedom": "1 grau de liberdade",
+  "ui.3d_mouse_axes_reassigned": "Os eixos estão reatribuídos nas Preferências, e isso continua valendo sobre esta calibração.",
+  "ui.3d_mouse_button": "Botão {number}",
+  "ui.3d_mouse_button_nothing": "Nada",
+  "ui.3d_mouse_button_settings": "Configurações do mouse 3D",
+  "ui.3d_mouse_buttons": "Botões",
+  "ui.3d_mouse_buttons_hint": "Aperte um botão do seu mouse 3D para encontrá-lo aqui e escolha o que ele faz.",
+  "ui.3d_mouse_buttons_no_device": "Conecte um mouse 3D para escolher o que os botões fazem.",
+  "ui.3d_mouse_buttons_reset": "Restaurar os botões padrão",
+  "ui.3d_mouse_calibrate": "Calibrar…",
+  "ui.3d_mouse_calibrate_tip": "Mova a tampa como a janela pedir, para que o SolidCraft aprenda para onde e até onde vai cada eixo deste mouse 3D. Salvo para este mouse 3D.",
+  "ui.3d_mouse_calibrate_title": "Calibrar mouse 3D",
+  "ui.3d_mouse_calibrate_wait": "Mova o mouse 3D uma vez para o SolidCraft vê-lo.",
+  "ui.3d_mouse_calibrated": "Calibrado",
+  "ui.3d_mouse_calibration": "Calibração do mouse 3D",
+  "ui.3d_mouse_calibration_done": "Pronto. Salve para usá-la sempre que este mouse 3D estiver conectado.",
+  "ui.3d_mouse_calibration_no_response": "Um eixo quase não se moveu, então não dá para calibrá-lo. Recomece e mova a tampa mais longe a cada vez.",
+  "ui.3d_mouse_circles_help": "Os círculos mostram o que o dispositivo envia após a calibração. O modelo de teste mostra o que a vista faz com isso, após inversão, velocidade e atribuição de eixos.",
+  "ui.3d_mouse_dead_zone": "Zona morta",
+  "ui.3d_mouse_dead_zone_tip": "Quanto a tampa precisa se mover antes de a vista se mover, como fração do curso completo. Aumente se a vista se mexer com a tampa parada.",
+  "ui.3d_mouse_denied": "O SolidCraft vê um mouse 3D, mas não tem permissão para lê-lo. A regra udev está nas notas de configuração do mouse 3D.",
+  "ui.3d_mouse_denied_short": "Encontrado, mas não legível",
+  "ui.3d_mouse_driven_by": "Qual movimento calibrado do dispositivo controla este eixo. Escolher um que outro eixo já usa troca os dois.",
+  "ui.3d_mouse_driven_by_label": "controlado por",
+  "ui.3d_mouse_driver": "Driver do mouse 3D",
+  "ui.3d_mouse_driver_auto": "Automático",
+  "ui.3d_mouse_driver_direct": "Direto (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Lendo por enquanto pelo spacenavd: não foi possível abrir o dispositivo em si.",
+  "ui.3d_mouse_driver_only_direct": "Lendo o dispositivo diretamente; o spacenavd não está em execução",
+  "ui.3d_mouse_driver_only_spacenavd": "Lendo pelo spacenavd, a única opção disponível",
+  "ui.3d_mouse_forget": "Esquecer calibração",
+  "ui.3d_mouse_ghost_left_viewport": "Viewport à esquerda",
+  "ui.3d_mouse_ghost_left_window": "Janela à esquerda",
+  "ui.3d_mouse_ghost_position": "Posição",
+  "ui.3d_mouse_ghost_right_viewport": "Viewport à direita",
+  "ui.3d_mouse_hint": "Move e gira a vista juntos; esboços usam apenas deslocamento e zoom.",
+  "ui.3d_mouse_kind_cap": "Retorno ao centro",
+  "ui.3d_mouse_kind_question": "Que tipo de mouse 3D é?",
+  "ui.3d_mouse_kind_trackball": "Trackball",
+  "ui.3d_mouse_looks_like_cap": "O valor se mantém enquanto você segura, como em um dispositivo do tipo “Retorno ao centro”.",
+  "ui.3d_mouse_looks_like_trackball": "O valor volta assim que você para de mover, como em um trackball.",
+  "ui.3d_mouse_motion_rotation_x": "Rotação X",
+  "ui.3d_mouse_motion_rotation_y": "Rotação Y",
+  "ui.3d_mouse_motion_rotation_z": "Rotação Z",
+  "ui.3d_mouse_motion_translation_x": "Translação X",
+  "ui.3d_mouse_motion_translation_y": "Translação Y",
+  "ui.3d_mouse_motion_translation_z": "Translação Z",
+  "ui.3d_mouse_navigate": "Navegar com o mouse 3D",
+  "ui.3d_mouse_none": "Nenhum mouse 3D encontrado",
+  "ui.3d_mouse_not_calibrated": "Não calibrado",
+  "ui.3d_mouse_offer": "Calibrar o mouse 3D corrige eixos trocados ou invertidos e ajusta a velocidade e a sensação.",
+  "ui.3d_mouse_offer_never": "Não mostrar novamente",
+  "ui.3d_mouse_offer_swap": "Mudar para Hidraw (driver direto)",
+  "ui.3d_mouse_reading": "Leitura",
+  "ui.3d_mouse_reset_axes": "Redefinir atribuição de eixos",
+  "ui.3d_mouse_reset_view": "Redefinir visualização",
+  "ui.3d_mouse_restore": "Restaurar padrões do mouse 3D",
+  "ui.3d_mouse_restore_ask": "Voltar as configurações do mouse 3D aos padrões? A calibração e o mapeamento dos botões continuam.",
+  "ui.3d_mouse_section": "Mouse 3D",
+  "ui.3d_mouse_show_in_view": "Mostrar o mouse 3D na vista 3D",
+  "ui.3d_mouse_show_in_view_tip": "Uma imagem do seu mouse 3D no canto inferior esquerdo, que se move quando você o move.",
+  "ui.3d_mouse_skip": "Meu dispositivo não faz isso",
+  "ui.3d_mouse_skip_tip": "Pula este movimento nos dois sentidos; a calibração o deixa de fora.",
   "ui.3d_mouse_speed": "Velocidade do mouse 3D",
+  "ui.3d_mouse_step_lift": "Levante a tampa, segure e solte.",
+  "ui.3d_mouse_step_press": "Pressione a tampa para baixo, segure e solte.",
+  "ui.3d_mouse_step_pull": "Puxe a tampa na sua direção, segure e solte.",
+  "ui.3d_mouse_step_push": "Empurre a tampa para longe de você, segure e solte.",
+  "ui.3d_mouse_step_rest": "Tire a mão da tampa e deixe-a parada.",
+  "ui.3d_mouse_step_rest_trackball": "Tire a mão da bola e deixe-a parada.",
+  "ui.3d_mouse_step_ring_clockwise": "Gire o anel de rolagem alguns cliques no sentido horário.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Gire o anel de rolagem alguns cliques no sentido anti-horário.",
+  "ui.3d_mouse_step_roll_away": "Role a bola para longe de você algumas vezes e deixe-a parar.",
+  "ui.3d_mouse_step_roll_left": "Role a bola para a esquerda algumas vezes e deixe-a parar.",
+  "ui.3d_mouse_step_roll_right": "Role a bola para a direita algumas vezes e deixe-a parar.",
+  "ui.3d_mouse_step_roll_toward": "Role a bola na sua direção algumas vezes e deixe-a parar.",
+  "ui.3d_mouse_step_slide_left": "Deslize a tampa para a esquerda, segure e solte.",
+  "ui.3d_mouse_step_slide_right": "Deslize a tampa para a direita, segure e solte.",
+  "ui.3d_mouse_step_spin_clockwise": "Gire a bola no sentido horário algumas vezes e deixe-a parar.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Gire a bola no sentido anti-horário algumas vezes e deixe-a parar.",
+  "ui.3d_mouse_step_tilt_away": "Incline o topo da tampa para longe de você (a borda mais próxima sobe), segure e solte.",
+  "ui.3d_mouse_step_tilt_left": "Incline a tampa para a esquerda (borda esquerda para baixo), segure e solte.",
+  "ui.3d_mouse_step_tilt_right": "Incline a tampa para a direita (borda direita para baixo), segure e solte.",
+  "ui.3d_mouse_step_tilt_toward": "Incline o topo da tampa na sua direção (a borda mais próxima desce), segure e solte.",
+  "ui.3d_mouse_step_touch": "Apoie a mão na tampa sem empurrá-la.",
+  "ui.3d_mouse_step_twist_clockwise": "Gire a tampa no sentido horário, segure e solte.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Gire a tampa no sentido anti-horário, segure e solte.",
+  "ui.3d_mouse_switch_cap": "Calibrar como retorno ao centro",
+  "ui.3d_mouse_switch_trackball": "Calibrar como trackball",
+  "ui.3d_mouse_view_axis": "Eixo da vista",
+  "ui.3d_mouse_view_off": "Desligado",
+  "ui.3d_mouse_view_off_tip": "O perfil do driver do mouse 3D desliga este eixo, então o movimento dele não move a vista. Escolher aqui o movimento de outro eixo troca os dois, e esse movimento deixa de mover a vista.",
+  "ui.3d_mouse_view_orbit_sideways": "Orbitar esquerda / direita",
+  "ui.3d_mouse_view_orbit_up_down": "Orbitar cima / baixo",
+  "ui.3d_mouse_view_pan_sideways": "Deslocar esquerda / direita",
+  "ui.3d_mouse_view_pan_up_down": "Deslocar cima / baixo",
+  "ui.3d_mouse_view_roll": "Girar a vista",
+  "ui.3d_mouse_view_unmapped": "Eixo {n}",
+  "ui.3d_mouse_view_zoom": "Zoom",
+  "ui.3d_mouse_waiting": "Aguardando movimento",
+  "ui.3d_mouse_wiggle": "Se você tiver um conectado, mexa nele um pouco.",
   "ui.3d_sketch": "Esboço 3D",
   "ui.activate": "Ativar",
   "ui.active_component": "Componente ativo",
@@ -1351,6 +1467,7 @@
   "ui.blocked": "Bloqueado",
   "ui.bodies": "Corpos",
   "ui.bodies_all_if_none": "Corpos (todos se nenhum)",
+  "ui.bottom": "Base",
   "ui.box": "Caixa",
   "ui.break": "Quebrar",
   "ui.browser_bodies_one": "{count} corpo",
@@ -1503,6 +1620,7 @@
   "ui.grid_follows_view_hint": "As vistas laterais mostram a grade no plano vertical voltado para elas, em vez do solo",
   "ui.ground_shadow": "Sombra no chão",
   "ui.groupSelected": "Agrupar seleção",
+  "ui.hatch": "Hachura",
   "ui.heading_add_ins": "COMPLEMENTOS",
   "ui.heading_assemble": "MONTAR",
   "ui.heading_box": "CAIXA",
@@ -1793,59 +1911,6 @@
   "ui.smooth_wheel_zoom": "Zoom suave com a roda",
   "ui.smooth_wheel_zoom_tip": "Desative para aplicar cada evento da roda na hora, sem rastro de suavização",
   "ui.snap": "Encaixe",
-  "ui.space_mouse_axes_reassigned": "Os eixos estão reatribuídos nas Preferências, e isso continua valendo sobre esta calibração.",
-  "ui.space_mouse_calibrate": "Calibrar…",
-  "ui.space_mouse_calibrate_tip": "Mova a tampa como a janela pedir, para que o SolidCraft aprenda para onde e até onde vai cada eixo deste mouse 3D. Salvo para este mouse 3D.",
-  "ui.space_mouse_calibrate_title": "Calibrar mouse 3D",
-  "ui.space_mouse_calibrated": "Calibrado",
-  "ui.space_mouse_calibration": "Calibração do mouse 3D",
-  "ui.space_mouse_calibration_done": "Pronto. Salve para usá-la sempre que este mouse 3D estiver conectado.",
-  "ui.space_mouse_calibration_no_response": "Um eixo quase não se moveu, então não dá para calibrá-lo. Recomece e mova a tampa mais longe a cada vez.",
-  "ui.space_mouse_dead_zone": "Zona morta",
-  "ui.space_mouse_dead_zone_tip": "Quanto a tampa precisa se mover antes de a vista se mover, como fração do curso completo. Aumente se a vista se mexer com a tampa parada.",
-  "ui.space_mouse_driven_by": "Qual movimento calibrado do dispositivo controla este eixo. Escolher um que outro eixo já usa troca os dois.",
-  "ui.space_mouse_driven_by_label": "controlado por",
-  "ui.space_mouse_driver": "Driver do mouse 3D",
-  "ui.space_mouse_driver_auto": "Automático",
-  "ui.space_mouse_driver_direct": "Direto (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Lendo o dispositivo diretamente; o spacenavd não está em execução",
-  "ui.space_mouse_driver_only_spacenavd": "Lendo pelo spacenavd, a única opção disponível",
-  "ui.space_mouse_forget": "Esquecer calibração",
-  "ui.space_mouse_hint": "Move e gira a vista juntos; esboços usam apenas deslocamento e zoom.",
-  "ui.space_mouse_motion_rotation_x": "Rotação X",
-  "ui.space_mouse_motion_rotation_y": "Rotação Y",
-  "ui.space_mouse_motion_rotation_z": "Rotação Z",
-  "ui.space_mouse_motion_translation_x": "Translação X",
-  "ui.space_mouse_motion_translation_y": "Translação Y",
-  "ui.space_mouse_motion_translation_z": "Translação Z",
-  "ui.space_mouse_navigate": "Navegar com SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Nenhum mouse 3D encontrado",
-  "ui.space_mouse_not_calibrated": "Não calibrado",
-  "ui.space_mouse_reading": "Leitura",
-  "ui.space_mouse_reset_axes": "Redefinir atribuição de eixos",
-  "ui.space_mouse_step_lift": "Levante a tampa, segure e solte.",
-  "ui.space_mouse_step_press": "Pressione a tampa para baixo, segure e solte.",
-  "ui.space_mouse_step_pull": "Puxe a tampa na sua direção, segure e solte.",
-  "ui.space_mouse_step_push": "Empurre a tampa para longe de você, segure e solte.",
-  "ui.space_mouse_step_rest": "Tire a mão da tampa e deixe-a parada.",
-  "ui.space_mouse_step_slide_left": "Deslize a tampa para a esquerda, segure e solte.",
-  "ui.space_mouse_step_slide_right": "Deslize a tampa para a direita, segure e solte.",
-  "ui.space_mouse_step_tilt_back": "Incline a tampa para trás (borda da frente para cima), segure e solte.",
-  "ui.space_mouse_step_tilt_forward": "Incline a tampa para a frente (borda da frente para baixo), segure e solte.",
-  "ui.space_mouse_step_tilt_left": "Incline a tampa para a esquerda (borda esquerda para baixo), segure e solte.",
-  "ui.space_mouse_step_tilt_right": "Incline a tampa para a direita (borda direita para baixo), segure e solte.",
-  "ui.space_mouse_step_twist_clockwise": "Gire a tampa no sentido horário, segure e solte.",
-  "ui.space_mouse_step_twist_counterclockwise": "Gire a tampa no sentido anti-horário, segure e solte.",
-  "ui.space_mouse_view_axis": "Eixo da vista",
-  "ui.space_mouse_view_off": "Desligado",
-  "ui.space_mouse_view_off_tip": "O perfil do driver do mouse 3D desliga este eixo, então o movimento dele não move a vista. Escolher aqui o movimento de outro eixo troca os dois, e esse movimento deixa de mover a vista.",
-  "ui.space_mouse_view_orbit_sideways": "Orbitar esquerda / direita",
-  "ui.space_mouse_view_orbit_up_down": "Orbitar cima / baixo",
-  "ui.space_mouse_view_pan_sideways": "Deslocar esquerda / direita",
-  "ui.space_mouse_view_pan_up_down": "Deslocar cima / baixo",
-  "ui.space_mouse_view_roll": "Girar a vista",
-  "ui.space_mouse_view_unmapped": "Eixo {n}",
-  "ui.space_mouse_view_zoom": "Zoom",
   "ui.spacing": "Espaçamento",
   "ui.spacing_2": "Espaçamento 2",
   "ui.sphere": "Esfera",

assets/locales/ro.json

@@ -72,6 +72,7 @@
   "Choose…": "Alegeți…",
   "Circular": "Circular",
   "Circumference": "Circumferință",
+  "Clockwise": "În sens orar",
   "Close draft": "Închide ciorna",
   "Collisions": "Coliziuni",
   "Colour": "Culoare",
@@ -321,6 +322,7 @@
   "Search commands": "Caută comenzi",
   "Search this library": "Caută în această bibliotecă",
   "Section": "Secțiune",
+  "Section position": "Poziția secțiunii",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Selectează altul: țineți apăsat butonul stâng nemișcat pe model (sau clic dreapta › Selectează altul…) pentru a lista tot ce se află sub cursor; faceți clic din nou în același loc pentru a selecta următorul element. Dublu clic pe butonul din mijloc pentru a merge Acasă (Preferințe › Navigare).",
   "Select bodies (a face picks its body)": "Selectați corpuri (o față alege corpul ei)",
   "Select bodies or faces instead": "Selectați în schimb corpuri sau fețe",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft s-a închis înainte ca aceste proiecte să fie salvate. Ultima lor salvare automată poate fi deschisă.",
   "Specialise": "Specializează",
   "Speed": "Viteză",
+  "Square": "Pătrat",
   "Stand it up": "Ridică-l în picioare",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Ridică-l în picioare: un sfert de rotație în jurul lui X, ca o singură operație de mutare ce poate fi anulată.",
   "Stand this part up?": "Ridicați această piesă în picioare?",
+  "Start angle": "Unghi de început",
   "Start bulge": "Bombare inițială",
   "Start continuity": "Continuitate inițială",
   "Step": "Pas",
@@ -411,6 +415,7 @@
   "angle, height": "unghi, înălțime",
   "appearance.dielectric_ior": "IOR dielectric",
   "appearance.metallic": "Metalic",
+  "appearance.only_available": "Doar aspecte disponibile",
   "appearance.pbr_help": "Vizualizați această suprafață în Randare sau într-un PNG de produs. Fără refracție sau transmisie.",
   "appearance.pbr_opaque": "PBR opac",
   "appearance.roughness": "Rugozitate",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "Inserează STEP",
   "cmd.file_save_mesh": "Salvează ca plasă",
   "cmd.file_slicers": "Slicere instalate",
+  "cmd.frame_member": "Element de cadru",
+  "cmd.frame_profile_insert": "Inserare profil",
+  "cmd.frame_profile_list": "Bibliotecă de profile",
+  "cmd.frame_profile_properties": "Proprietăți profil",
   "cmd.inspect_accessibility": "Analiza accesibilității",
   "cmd.inspect_center_of_mass": "Centru de masă",
   "cmd.inspect_clearance": "Joc",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Material fizic nou",
   "cmd.material_delete": "Șterge materialul fizic",
   "cmd.material_edit": "Editează materialul fizic",
+  "cmd.material_inspect": "Inspectează materialul fizic",
   "cmd.material_list": "Listează materialele",
   "cmd.material_properties_directional": "Modul de elasticitate direcțional",
   "cmd.material_properties_validate": "Validează datele materialului fizic",
@@ -1120,7 +1130,50 @@
   "trace.stopped_by_contact": "Se termină la eșantionul {sample}: {a} ar trece prin {b}",
   "trace.stopped_by_loop": "Se termină la eșantionul {sample}: bucla prin {joint} nu se mai poate închide",
   "ui.1_degree_of_freedom": "1 grad de libertate",
+  "ui.3d_mouse_calibrate": "Calibrează…",
+  "ui.3d_mouse_calibrate_tip": "Mișcați capacul așa cum cere fereastra, ca SolidCraft să învețe în ce direcție merge fiecare axă a acestui mouse 3D și cât de departe. Salvat pentru acest mouse 3D.",
+  "ui.3d_mouse_calibrate_title": "Calibrează mouse-ul 3D",
+  "ui.3d_mouse_calibrate_wait": "Mișcă o dată mouse-ul 3D ca SolidCraft să îl vadă.",
+  "ui.3d_mouse_calibrated": "Calibrat",
+  "ui.3d_mouse_calibration": "Calibrarea mouse-ului 3D",
+  "ui.3d_mouse_calibration_done": "Gata. Salvați-o pentru a o folosi ori de câte ori acest mouse 3D este conectat.",
+  "ui.3d_mouse_calibration_no_response": "O axă abia s-a mișcat, deci nu poate fi calibrată. Reîncepeți și mișcați capacul mai mult de fiecare dată.",
+  "ui.3d_mouse_circles_help": "Cercurile arată ce trimite dispozitivul după calibrare. Modelul de test arată ce face vizualizarea cu acestea, după inversare, viteză și atribuirea axelor.",
+  "ui.3d_mouse_dead_zone": "Zonă moartă",
+  "ui.3d_mouse_dead_zone_tip": "Cât trebuie să se miște capacul înainte ca vizualizarea să se miște, ca fracțiune din cursa completă. Măriți-o dacă vizualizarea derivă cât capacul este în repaus.",
+  "ui.3d_mouse_denied": "SolidCraft vede un mouse 3D, dar nu are voie să îl citească. Regula udev este în notele de configurare a mouse-ului 3D.",
+  "ui.3d_mouse_denied_short": "Găsit, dar nu poate fi citit",
+  "ui.3d_mouse_driver_fallback": "Deocamdată se citește prin spacenavd: dispozitivul în sine nu a putut fi deschis.",
+  "ui.3d_mouse_forget": "Uită calibrarea",
+  "ui.3d_mouse_ghost_left_viewport": "Viewport stânga",
+  "ui.3d_mouse_ghost_left_window": "Fereastră stânga",
+  "ui.3d_mouse_ghost_position": "Poziție",
+  "ui.3d_mouse_ghost_right_viewport": "Viewport dreapta",
+  "ui.3d_mouse_hint": "Mută și rotește vizualizarea împreună; schițele folosesc doar panoramare și zoom.",
+  "ui.3d_mouse_navigate": "Navighează cu mouse-ul 3D",
+  "ui.3d_mouse_none": "Niciun mouse 3D găsit",
+  "ui.3d_mouse_not_calibrated": "Necalibrat",
+  "ui.3d_mouse_offer": "Calibrarea mouse-ului 3D corectează axele inversate sau schimbate între ele și îi reglează viteza și senzația.",
+  "ui.3d_mouse_offer_never": "Nu mai afișa",
+  "ui.3d_mouse_offer_swap": "Treci la Hidraw (driver direct)",
+  "ui.3d_mouse_reading": "Valoare citită",
+  "ui.3d_mouse_reset_view": "Resetează vizualizarea",
+  "ui.3d_mouse_restore": "Restaurează implicitele mouse-ului 3D",
+  "ui.3d_mouse_restore_ask": "Revii la valorile implicite ale setărilor mouse-ului 3D? Calibrarea și atribuirea butoanelor rămân.",
   "ui.3d_mouse_speed": "Viteza mouse-ului 3D",
+  "ui.3d_mouse_step_lift": "Ridicați capacul în sus, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_press": "Apăsați capacul în jos, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_pull": "Trageți capacul spre dumneavoastră, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_push": "Împingeți capacul de la dumneavoastră, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_rest": "Luați mâna de pe capac și lăsați-l nemișcat.",
+  "ui.3d_mouse_step_slide_left": "Glisați capacul spre stânga, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_slide_right": "Glisați capacul spre dreapta, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_tilt_left": "Înclinați capacul spre stânga (marginea stângă în jos), țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_tilt_right": "Înclinați capacul spre dreapta (marginea dreaptă în jos), țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_twist_clockwise": "Răsuciți capacul în sensul acelor de ceasornic, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Răsuciți capacul în sens invers acelor de ceasornic, țineți-l, apoi eliberați-l.",
+  "ui.3d_mouse_waiting": "Se așteaptă mișcare",
+  "ui.3d_mouse_wiggle": "Dacă ai unul conectat, mișcă-l puțin.",
   "ui.3d_sketch": "Schiță 3D",
   "ui.activate": "Activează",
   "ui.active_component": "Componentă activă",
@@ -1502,6 +1555,7 @@
   "ui.grid_follows_view_hint": "Vederile laterale afișează grila pe planul vertical orientat spre ele, în loc de sol",
   "ui.ground_shadow": "Umbra la sol",
   "ui.groupSelected": "Grupează selecția",
+  "ui.hatch": "Hașură",
   "ui.heading_add_ins": "EXTENSII",
   "ui.heading_assemble": "ASAMBLARE",
   "ui.heading_box": "CUTIE",
@@ -1792,34 +1846,6 @@
   "ui.smooth_wheel_zoom": "Zoom lin cu rotița",
   "ui.smooth_wheel_zoom_tip": "Dezactivați pentru a aplica imediat fiecare eveniment al rotiței, fără coadă de netezire",
   "ui.snap": "Agățare",
-  "ui.space_mouse_calibrate": "Calibrează…",
-  "ui.space_mouse_calibrate_tip": "Mișcați capacul așa cum cere fereastra, ca SolidCraft să învețe în ce direcție merge fiecare axă a acestui mouse 3D și cât de departe. Salvat pentru acest mouse 3D.",
-  "ui.space_mouse_calibrate_title": "Calibrează mouse-ul 3D",
-  "ui.space_mouse_calibrated": "Calibrat",
-  "ui.space_mouse_calibration": "Calibrarea mouse-ului 3D",
-  "ui.space_mouse_calibration_done": "Gata. Salvați-o pentru a o folosi ori de câte ori acest mouse 3D este conectat.",
-  "ui.space_mouse_calibration_no_response": "O axă abia s-a mișcat, deci nu poate fi calibrată. Reîncepeți și mișcați capacul mai mult de fiecare dată.",
-  "ui.space_mouse_dead_zone": "Zonă moartă",
-  "ui.space_mouse_dead_zone_tip": "Cât trebuie să se miște capacul înainte ca vizualizarea să se miște, ca fracțiune din cursa completă. Măriți-o dacă vizualizarea derivă cât capacul este în repaus.",
-  "ui.space_mouse_forget": "Uită calibrarea",
-  "ui.space_mouse_hint": "Mută și rotește vizualizarea împreună; schițele folosesc doar panoramare și zoom.",
-  "ui.space_mouse_navigate": "Navighează cu SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Niciun mouse 3D găsit",
-  "ui.space_mouse_not_calibrated": "Necalibrat",
-  "ui.space_mouse_reading": "Valoare citită",
-  "ui.space_mouse_step_lift": "Ridicați capacul în sus, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_press": "Apăsați capacul în jos, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_pull": "Trageți capacul spre dumneavoastră, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_push": "Împingeți capacul de la dumneavoastră, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_rest": "Luați mâna de pe capac și lăsați-l nemișcat.",
-  "ui.space_mouse_step_slide_left": "Glisați capacul spre stânga, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_slide_right": "Glisați capacul spre dreapta, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_tilt_back": "Înclinați capacul spre spate (marginea din față în sus), țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_tilt_forward": "Înclinați capacul spre față (marginea din față în jos), țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_tilt_left": "Înclinați capacul spre stânga (marginea stângă în jos), țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_tilt_right": "Înclinați capacul spre dreapta (marginea dreaptă în jos), țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_twist_clockwise": "Răsuciți capacul în sensul acelor de ceasornic, țineți-l, apoi eliberați-l.",
-  "ui.space_mouse_step_twist_counterclockwise": "Răsuciți capacul în sens invers acelor de ceasornic, țineți-l, apoi eliberați-l.",
   "ui.spacing": "Spațiere",
   "ui.spacing_2": "Spațierea 2",
   "ui.sphere": "Sferă",

assets/locales/ru.json

@@ -72,6 +72,7 @@
   "Choose…": "Выбрать…",
   "Circular": "Круговой",
   "Circumference": "Окружность",
+  "Clockwise": "По часовой стрелке",
   "Close draft": "Закрыть анализ уклонов",
   "Collisions": "Столкновения",
   "Colour": "Цвет",
@@ -321,6 +322,7 @@
   "Search commands": "Поиск команд",
   "Search this library": "Поиск в этой библиотеке",
   "Section": "Сечение",
+  "Section position": "Положение сечения",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Выбрать другое: удерживайте левую кнопку на модели (или правый щелчок › Выбрать другое…), чтобы увидеть всё под курсором; повторный щелчок в том же месте выбирает следующий объект. Двойной щелчок средней кнопкой — «Главная» (Настройки › Навигация).",
   "Select bodies (a face picks its body)": "Выберите тела (выбор грани выбирает её тело)",
   "Select bodies or faces instead": "Вместо этого выберите тела или грани",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft закрылся до сохранения этих дизайнов. Можно открыть последнюю автосохранённую версию.",
   "Specialise": "Специализировать",
   "Speed": "Скорость",
+  "Square": "Квадрат",
   "Stand it up": "Поставить вертикально",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Поставить вертикально: четверть оборота вокруг X одной операцией «Переместить», которую можно отменить.",
   "Stand this part up?": "Поставить эту деталь вертикально?",
+  "Start angle": "Начальный угол",
   "Start bulge": "Выпуклость в начале",
   "Start continuity": "Непрерывность в начале",
   "Step": "Шаг",
@@ -411,6 +415,7 @@
   "angle, height": "угол, высота",
   "appearance.dielectric_ior": "Показатель преломления диэлектрика",
   "appearance.metallic": "Металличность",
+  "appearance.only_available": "Только доступные внешние виды",
   "appearance.pbr_help": "Просмотр поверхности во вкладке Рендер или на PNG изделия. Без преломления и пропускания света.",
   "appearance.pbr_opaque": "Непрозрачный PBR",
   "appearance.roughness": "Шероховатость",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "Вставить STEP",
   "cmd.file_save_mesh": "Сохранить как меш",
   "cmd.file_slicers": "Установленные слайсеры",
+  "cmd.frame_member": "Элемент рамы",
+  "cmd.frame_profile_insert": "Вставить профиль",
+  "cmd.frame_profile_list": "Библиотека профилей",
+  "cmd.frame_profile_properties": "Свойства профиля",
   "cmd.inspect_accessibility": "Анализ доступности",
   "cmd.inspect_center_of_mass": "Центр масс",
   "cmd.inspect_clearance": "Зазор",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Новый физический материал",
   "cmd.material_delete": "Удалить физический материал",
   "cmd.material_edit": "Изменить физический материал",
+  "cmd.material_inspect": "Проверить физический материал",
   "cmd.material_list": "Список материалов",
   "cmd.material_properties_directional": "Направленный модуль упругости",
   "cmd.material_properties_validate": "Проверить данные физического материала",
@@ -1120,7 +1130,106 @@
   "trace.stopped_by_contact": "Заканчивается на отсчёте {sample}: {a} прошёл бы сквозь {b}",
   "trace.stopped_by_loop": "Заканчивается на отсчёте {sample}: контур через {joint} дальше не замыкается",
   "ui.1_degree_of_freedom": "1 степень свободы",
+  "ui.3d_mouse_axes_reassigned": "Оси переназначены в настройках, и это действует и поверх этой калибровки.",
+  "ui.3d_mouse_button": "Кнопка {number}",
+  "ui.3d_mouse_button_nothing": "Ничего",
+  "ui.3d_mouse_button_settings": "Настройки 3D-мыши",
+  "ui.3d_mouse_buttons": "Кнопки",
+  "ui.3d_mouse_buttons_hint": "Нажмите кнопку на 3D-мыши, чтобы найти её здесь, и выберите, что она делает.",
+  "ui.3d_mouse_buttons_no_device": "Подключите 3D-мышь, чтобы назначить её кнопки.",
+  "ui.3d_mouse_buttons_reset": "Вернуть кнопки по умолчанию",
+  "ui.3d_mouse_calibrate": "Калибровать…",
+  "ui.3d_mouse_calibrate_tip": "Двигайте колпачок так, как просит окно, чтобы SolidCraft узнал, куда и насколько далеко движется каждая ось этой 3D-мыши. Сохраняется для этой 3D-мыши.",
+  "ui.3d_mouse_calibrate_title": "Калибровка 3D-мыши",
+  "ui.3d_mouse_calibrate_wait": "Один раз подвигайте 3D-мышь, чтобы SolidCraft её увидел.",
+  "ui.3d_mouse_calibrated": "Откалибрована",
+  "ui.3d_mouse_calibration": "Калибровка 3D-мыши",
+  "ui.3d_mouse_calibration_done": "Готово. Сохраните её, чтобы она применялась всякий раз, когда подключена эта 3D-мышь.",
+  "ui.3d_mouse_calibration_no_response": "Одна ось почти не сдвинулась, поэтому её нельзя откалибровать. Начните заново и каждый раз двигайте колпачок дальше.",
+  "ui.3d_mouse_circles_help": "Круги показывают, что устройство отправляет после калибровки. Тестовая модель показывает, что вид делает с этим после инверсии, скорости и назначения осей.",
+  "ui.3d_mouse_dead_zone": "Мёртвая зона",
+  "ui.3d_mouse_dead_zone_tip": "Насколько нужно сдвинуть колпачок, прежде чем сдвинется вид, в доле от полного хода. Увеличьте, если вид смещается, когда колпачок в покое.",
+  "ui.3d_mouse_denied": "SolidCraft видит 3D-мышь, но не имеет права её читать. Правило udev описано в заметках по настройке 3D-мыши.",
+  "ui.3d_mouse_denied_short": "Найдена, но недоступна для чтения",
+  "ui.3d_mouse_driven_by": "Какое откалиброванное движение устройства управляет этой осью. Если выбрать движение, которое уже использует другая ось, они поменяются местами.",
+  "ui.3d_mouse_driven_by_label": "управляется",
+  "ui.3d_mouse_driver": "Драйвер 3D-мыши",
+  "ui.3d_mouse_driver_auto": "Автоматически",
+  "ui.3d_mouse_driver_direct": "Напрямую (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Пока чтение идёт через spacenavd: само устройство открыть не удалось.",
+  "ui.3d_mouse_driver_only_direct": "Чтение напрямую с устройства; spacenavd не запущен",
+  "ui.3d_mouse_driver_only_spacenavd": "Чтение через spacenavd, других вариантов нет",
+  "ui.3d_mouse_forget": "Забыть калибровку",
+  "ui.3d_mouse_ghost_left_viewport": "Область просмотра слева",
+  "ui.3d_mouse_ghost_left_window": "Окно слева",
+  "ui.3d_mouse_ghost_position": "Положение",
+  "ui.3d_mouse_ghost_right_viewport": "Область просмотра справа",
+  "ui.3d_mouse_hint": "Совместное перемещение и вращение вида; в эскизе — только панорама и масштаб.",
+  "ui.3d_mouse_kind_cap": "Возврат в центр",
+  "ui.3d_mouse_kind_question": "Какая у вас 3D-мышь?",
+  "ui.3d_mouse_kind_trackball": "Трекбол",
+  "ui.3d_mouse_looks_like_cap": "Значение держится, пока вы удерживаете, — как у устройства типа «Возврат в центр».",
+  "ui.3d_mouse_looks_like_trackball": "Значение возвращается, как только вы останавливаетесь, — как у трекбола.",
+  "ui.3d_mouse_motion_rotation_x": "Вращение X",
+  "ui.3d_mouse_motion_rotation_y": "Вращение Y",
+  "ui.3d_mouse_motion_rotation_z": "Вращение Z",
+  "ui.3d_mouse_motion_translation_x": "Смещение X",
+  "ui.3d_mouse_motion_translation_y": "Смещение Y",
+  "ui.3d_mouse_motion_translation_z": "Смещение Z",
+  "ui.3d_mouse_navigate": "Навигация с помощью 3D-мыши",
+  "ui.3d_mouse_none": "3D-мышь не найдена",
+  "ui.3d_mouse_not_calibrated": "Не откалибрована",
+  "ui.3d_mouse_offer": "Калибровка 3D-мыши исправляет перепутанные или перевёрнутые оси и настраивает скорость и ощущения.",
+  "ui.3d_mouse_offer_never": "Больше не показывать",
+  "ui.3d_mouse_offer_swap": "Переключить на Hidraw (прямой драйвер)",
+  "ui.3d_mouse_reading": "Показания",
+  "ui.3d_mouse_reset_axes": "Сбросить назначение осей",
+  "ui.3d_mouse_reset_view": "Сбросить вид",
+  "ui.3d_mouse_restore": "Восстановить настройки 3D-мыши",
+  "ui.3d_mouse_restore_ask": "Вернуть настройки 3D-мыши к значениям по умолчанию? Калибровка и назначение кнопок останутся.",
+  "ui.3d_mouse_section": "3D-мышь",
+  "ui.3d_mouse_show_in_view": "Показывать 3D-мышь в 3D-виде",
+  "ui.3d_mouse_show_in_view_tip": "Изображение вашей 3D-мыши в левом нижнем углу, которое двигается вместе с ней.",
+  "ui.3d_mouse_skip": "Моё устройство так не умеет",
+  "ui.3d_mouse_skip_tip": "Пропускает это движение в обе стороны; калибровка его не учитывает.",
   "ui.3d_mouse_speed": "Скорость 3D-мыши",
+  "ui.3d_mouse_step_lift": "Поднимите колпачок вверх, удержите и отпустите.",
+  "ui.3d_mouse_step_press": "Нажмите на колпачок вниз, удержите и отпустите.",
+  "ui.3d_mouse_step_pull": "Потяните колпачок на себя, удержите и отпустите.",
+  "ui.3d_mouse_step_push": "Толкните колпачок от себя, удержите и отпустите.",
+  "ui.3d_mouse_step_rest": "Уберите руку с колпачка и не трогайте его.",
+  "ui.3d_mouse_step_rest_trackball": "Уберите руку с шара и не трогайте его.",
+  "ui.3d_mouse_step_ring_clockwise": "Поверните кольцо прокрутки на несколько щелчков по часовой стрелке.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Поверните кольцо прокрутки на несколько щелчков против часовой стрелки.",
+  "ui.3d_mouse_step_roll_away": "Прокатите шар от себя несколько раз и дайте ему остановиться.",
+  "ui.3d_mouse_step_roll_left": "Прокатите шар влево несколько раз и дайте ему остановиться.",
+  "ui.3d_mouse_step_roll_right": "Прокатите шар вправо несколько раз и дайте ему остановиться.",
+  "ui.3d_mouse_step_roll_toward": "Прокатите шар к себе несколько раз и дайте ему остановиться.",
+  "ui.3d_mouse_step_slide_left": "Сдвиньте колпачок влево, удержите и отпустите.",
+  "ui.3d_mouse_step_slide_right": "Сдвиньте колпачок вправо, удержите и отпустите.",
+  "ui.3d_mouse_step_spin_clockwise": "Покрутите шар по часовой стрелке несколько раз и дайте ему остановиться.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Покрутите шар против часовой стрелки несколько раз и дайте ему остановиться.",
+  "ui.3d_mouse_step_tilt_away": "Наклоните верх колпачка от себя (ближний край поднимается), удержите и отпустите.",
+  "ui.3d_mouse_step_tilt_left": "Наклоните колпачок влево (левый край вниз), удержите и отпустите.",
+  "ui.3d_mouse_step_tilt_right": "Наклоните колпачок вправо (правый край вниз), удержите и отпустите.",
+  "ui.3d_mouse_step_tilt_toward": "Наклоните верх колпачка к себе (ближний край опускается), удержите и отпустите.",
+  "ui.3d_mouse_step_touch": "Положите руку на колпачок, не нажимая на него.",
+  "ui.3d_mouse_step_twist_clockwise": "Поверните колпачок по часовой стрелке, удержите и отпустите.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Поверните колпачок против часовой стрелки, удержите и отпустите.",
+  "ui.3d_mouse_switch_cap": "Калибровать как возврат в центр",
+  "ui.3d_mouse_switch_trackball": "Калибровать как трекбол",
+  "ui.3d_mouse_view_axis": "Ось вида",
+  "ui.3d_mouse_view_off": "Выкл.",
+  "ui.3d_mouse_view_off_tip": "Профиль драйвера 3D-мыши отключает эту ось, поэтому её движение не двигает вид. Если выбрать здесь движение другой оси, они поменяются местами, и это движение перестанет двигать вид.",
+  "ui.3d_mouse_view_orbit_sideways": "Орбита влево / вправо",
+  "ui.3d_mouse_view_orbit_up_down": "Орбита вверх / вниз",
+  "ui.3d_mouse_view_pan_sideways": "Сдвиг влево / вправо",
+  "ui.3d_mouse_view_pan_up_down": "Сдвиг вверх / вниз",
+  "ui.3d_mouse_view_roll": "Крен",
+  "ui.3d_mouse_view_unmapped": "Ось {n}",
+  "ui.3d_mouse_view_zoom": "Масштаб",
+  "ui.3d_mouse_waiting": "Ожидание движения",
+  "ui.3d_mouse_wiggle": "Если 3D-мышь подключена, слегка подвигайте её.",
   "ui.3d_sketch": "3D-эскиз",
   "ui.activate": "Активировать",
   "ui.active_component": "Активный компонент",
@@ -1350,6 +1459,7 @@
   "ui.blocked": "Заблокировано",
   "ui.bodies": "Тела",
   "ui.bodies_all_if_none": "Тела (все, если не выбраны)",
+  "ui.bottom": "Снизу",
   "ui.box": "Бокс",
   "ui.break": "Разорвать",
   "ui.browser_bodies_one": "{count} тело",
@@ -1502,6 +1612,7 @@
   "ui.grid_follows_view_hint": "На боковых видах сетка показывается на вертикальной плоскости, обращённой к вам, а не на земле",
   "ui.ground_shadow": "Тень на земле",
   "ui.groupSelected": "Группировать выбранное",
+  "ui.hatch": "Штриховка",
   "ui.heading_add_ins": "НАДСТРОЙКИ",
   "ui.heading_assemble": "СБОРКА",
   "ui.heading_box": "БОКС",
@@ -1792,59 +1903,6 @@
   "ui.smooth_wheel_zoom": "Плавное масштабирование колесом",
   "ui.smooth_wheel_zoom_tip": "Отключите, чтобы каждое движение колеса применялось сразу, без сглаживания",
   "ui.snap": "Привязка",
-  "ui.space_mouse_axes_reassigned": "Оси переназначены в настройках, и это действует и поверх этой калибровки.",
-  "ui.space_mouse_calibrate": "Калибровать…",
-  "ui.space_mouse_calibrate_tip": "Двигайте колпачок так, как просит окно, чтобы SolidCraft узнал, куда и насколько далеко движется каждая ось этой 3D-мыши. Сохраняется для этой 3D-мыши.",
-  "ui.space_mouse_calibrate_title": "Калибровка 3D-мыши",
-  "ui.space_mouse_calibrated": "Откалибрована",
-  "ui.space_mouse_calibration": "Калибровка 3D-мыши",
-  "ui.space_mouse_calibration_done": "Готово. Сохраните её, чтобы она применялась всякий раз, когда подключена эта 3D-мышь.",
-  "ui.space_mouse_calibration_no_response": "Одна ось почти не сдвинулась, поэтому её нельзя откалибровать. Начните заново и каждый раз двигайте колпачок дальше.",
-  "ui.space_mouse_dead_zone": "Мёртвая зона",
-  "ui.space_mouse_dead_zone_tip": "Насколько нужно сдвинуть колпачок, прежде чем сдвинется вид, в доле от полного хода. Увеличьте, если вид смещается, когда колпачок в покое.",
-  "ui.space_mouse_driven_by": "Какое откалиброванное движение устройства управляет этой осью. Если выбрать движение, которое уже использует другая ось, они поменяются местами.",
-  "ui.space_mouse_driven_by_label": "управляется",
-  "ui.space_mouse_driver": "Драйвер 3D-мыши",
-  "ui.space_mouse_driver_auto": "Автоматически",
-  "ui.space_mouse_driver_direct": "Напрямую (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Чтение напрямую с устройства; spacenavd не запущен",
-  "ui.space_mouse_driver_only_spacenavd": "Чтение через spacenavd, других вариантов нет",
-  "ui.space_mouse_forget": "Забыть калибровку",
-  "ui.space_mouse_hint": "Совместное перемещение и вращение вида; в эскизе — только панорама и масштаб.",
-  "ui.space_mouse_motion_rotation_x": "Вращение X",
-  "ui.space_mouse_motion_rotation_y": "Вращение Y",
-  "ui.space_mouse_motion_rotation_z": "Вращение Z",
-  "ui.space_mouse_motion_translation_x": "Смещение X",
-  "ui.space_mouse_motion_translation_y": "Смещение Y",
-  "ui.space_mouse_motion_translation_z": "Смещение Z",
-  "ui.space_mouse_navigate": "Навигация через SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "3D-мышь не найдена",
-  "ui.space_mouse_not_calibrated": "Не откалибрована",
-  "ui.space_mouse_reading": "Показания",
-  "ui.space_mouse_reset_axes": "Сбросить назначение осей",
-  "ui.space_mouse_step_lift": "Поднимите колпачок вверх, удержите и отпустите.",
-  "ui.space_mouse_step_press": "Нажмите на колпачок вниз, удержите и отпустите.",
-  "ui.space_mouse_step_pull": "Потяните колпачок на себя, удержите и отпустите.",
-  "ui.space_mouse_step_push": "Толкните колпачок от себя, удержите и отпустите.",
-  "ui.space_mouse_step_rest": "Уберите руку с колпачка и не трогайте его.",
-  "ui.space_mouse_step_slide_left": "Сдвиньте колпачок влево, удержите и отпустите.",
-  "ui.space_mouse_step_slide_right": "Сдвиньте колпачок вправо, удержите и отпустите.",
-  "ui.space_mouse_step_tilt_back": "Наклоните колпачок назад (передний край вверх), удержите и отпустите.",
-  "ui.space_mouse_step_tilt_forward": "Наклоните колпачок вперёд (передний край вниз), удержите и отпустите.",
-  "ui.space_mouse_step_tilt_left": "Наклоните колпачок влево (левый край вниз), удержите и отпустите.",
-  "ui.space_mouse_step_tilt_right": "Наклоните колпачок вправо (правый край вниз), удержите и отпустите.",
-  "ui.space_mouse_step_twist_clockwise": "Поверните колпачок по часовой стрелке, удержите и отпустите.",
-  "ui.space_mouse_step_twist_counterclockwise": "Поверните колпачок против часовой стрелки, удержите и отпустите.",
-  "ui.space_mouse_view_axis": "Ось вида",
-  "ui.space_mouse_view_off": "Выкл.",
-  "ui.space_mouse_view_off_tip": "Профиль драйвера 3D-мыши отключает эту ось, поэтому её движение не двигает вид. Если выбрать здесь движение другой оси, они поменяются местами, и это движение перестанет двигать вид.",
-  "ui.space_mouse_view_orbit_sideways": "Орбита влево / вправо",
-  "ui.space_mouse_view_orbit_up_down": "Орбита вверх / вниз",
-  "ui.space_mouse_view_pan_sideways": "Сдвиг влево / вправо",
-  "ui.space_mouse_view_pan_up_down": "Сдвиг вверх / вниз",
-  "ui.space_mouse_view_roll": "Крен",
-  "ui.space_mouse_view_unmapped": "Ось {n}",
-  "ui.space_mouse_view_zoom": "Масштаб",
   "ui.spacing": "Интервал",
   "ui.spacing_2": "Интервал 2",
   "ui.sphere": "Сфера",

assets/locales/sv.json

@@ -72,6 +72,7 @@
   "Choose…": "Välj…",
   "Circular": "Cirkulär",
   "Circumference": "Omkrets",
+  "Clockwise": "Medurs",
   "Close draft": "Stäng utkast",
   "Collisions": "Kollisioner",
   "Colour": "Färg",
@@ -321,6 +322,7 @@
   "Search commands": "Sök kommandon",
   "Search this library": "Sök i detta bibliotek",
   "Section": "Sektion",
+  "Section position": "Profilens läge",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Markera annan: håll vänsterknappen stilla på modellen (eller högerklicka › Markera annan…) för att lista allt under markören; klicka igen på samma plats för att markera nästa objekt där. Dubbelklicka med mittenknappen för att gå till Hem (Inställningar › Navigering).",
   "Select bodies (a face picks its body)": "Markera kroppar (en yta väljer sin kropp)",
   "Select bodies or faces instead": "Markera kroppar eller ytor istället",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft stängdes innan dessa konstruktioner sparades. Deras senaste autospar kan öppnas.",
   "Specialise": "Specialisera",
   "Speed": "Hastighet",
+  "Square": "Kvadrat",
   "Stand it up": "Res upp den",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Res upp den: ett kvartsvarv runt X, som en enda Flytta-funktion som du kan ångra.",
   "Stand this part up?": "Resa upp denna del?",
+  "Start angle": "Startvinkel",
   "Start bulge": "Startbukt",
   "Start continuity": "Startkontinuitet",
   "Step": "Steg",
@@ -411,6 +415,7 @@
   "angle, height": "vinkel, höjd",
   "appearance.dielectric_ior": "Dielektriskt IOR",
   "appearance.metallic": "Metallisk",
+  "appearance.only_available": "Endast tillgängliga utseenden",
   "appearance.pbr_help": "Visa den här ytan i Rendering eller en produkt-PNG. Ingen refraktion eller transmission.",
   "appearance.pbr_opaque": "Ogenomskinlig PBR",
   "appearance.roughness": "Skrovlighet",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "Infoga STEP",
   "cmd.file_save_mesh": "Spara som mesh",
   "cmd.file_slicers": "Installerade slicers",
+  "cmd.frame_member": "Ramdel",
+  "cmd.frame_profile_insert": "Infoga profil",
+  "cmd.frame_profile_list": "Profilbibliotek",
+  "cmd.frame_profile_properties": "Profilegenskaper",
   "cmd.inspect_accessibility": "Tillgänglighetsanalys",
   "cmd.inspect_center_of_mass": "Masscentrum",
   "cmd.inspect_clearance": "Frigång",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Nytt fysiskt material",
   "cmd.material_delete": "Ta bort fysiskt material",
   "cmd.material_edit": "Redigera fysiskt material",
+  "cmd.material_inspect": "Granska fysiskt material",
   "cmd.material_list": "Lista material",
   "cmd.material_properties_directional": "Riktningsberoende elasticitetsmodul",
   "cmd.material_properties_validate": "Validera fysiska materialdata",
@@ -1120,7 +1130,50 @@
   "trace.stopped_by_contact": "Slutar vid prov {sample}: {a} skulle gå igenom {b}",
   "trace.stopped_by_loop": "Slutar vid prov {sample}: slingan genom {joint} kan inte stängas längre",
   "ui.1_degree_of_freedom": "1 frihetsgrad",
+  "ui.3d_mouse_calibrate": "Kalibrera…",
+  "ui.3d_mouse_calibrate_tip": "Flytta knappen som fönstret ber om, så att SolidCraft lär sig åt vilket håll och hur långt varje axel på denna 3D-mus går. Sparas för denna 3D-mus.",
+  "ui.3d_mouse_calibrate_title": "Kalibrera 3D-mus",
+  "ui.3d_mouse_calibrate_wait": "Rör 3D-musen en gång så att SolidCraft ser den.",
+  "ui.3d_mouse_calibrated": "Kalibrerad",
+  "ui.3d_mouse_calibration": "Kalibrering av 3D-mus",
+  "ui.3d_mouse_calibration_done": "Klart. Spara den för att använda den när denna 3D-mus är ansluten.",
+  "ui.3d_mouse_calibration_no_response": "En axel rörde sig knappt, så den kan inte kalibreras. Börja om och flytta knappen längre varje gång.",
+  "ui.3d_mouse_circles_help": "Cirklarna visar vad enheten skickar efter kalibrering. Testmodellen visar vad vyn gör med det, efter inversion, hastighet och axeltilldelning.",
+  "ui.3d_mouse_dead_zone": "Dödzon",
+  "ui.3d_mouse_dead_zone_tip": "Hur långt knappen måste röra sig innan vyn gör det, som andel av dess fulla rörelse. Höj den om vyn driver medan knappen vilar.",
+  "ui.3d_mouse_denied": "SolidCraft ser en 3D-mus men får inte läsa den. Se installationsanteckningarna för 3D-musen om udev-regeln.",
+  "ui.3d_mouse_denied_short": "Hittad, men går inte att läsa",
+  "ui.3d_mouse_driver_fallback": "Läser tills vidare via spacenavd: själva enheten kunde inte öppnas.",
+  "ui.3d_mouse_forget": "Glöm kalibrering",
+  "ui.3d_mouse_ghost_left_viewport": "Vyn vänster",
+  "ui.3d_mouse_ghost_left_window": "Fönster vänster",
+  "ui.3d_mouse_ghost_position": "Placering",
+  "ui.3d_mouse_ghost_right_viewport": "Vyn höger",
+  "ui.3d_mouse_hint": "Flytta och rotera vyn tillsammans; skisser använder endast panorering och zoom.",
+  "ui.3d_mouse_navigate": "Navigera med 3D-musen",
+  "ui.3d_mouse_none": "Ingen 3D-mus hittades",
+  "ui.3d_mouse_not_calibrated": "Inte kalibrerad",
+  "ui.3d_mouse_offer": "Att kalibrera din 3D-mus rättar förväxlade eller omvända axlar och ställer in hastighet och känsla.",
+  "ui.3d_mouse_offer_never": "Visa inte igen",
+  "ui.3d_mouse_offer_swap": "Byt till Hidraw (direkt drivrutin)",
+  "ui.3d_mouse_reading": "Avläsning",
+  "ui.3d_mouse_reset_view": "Återställ vyn",
+  "ui.3d_mouse_restore": "Återställ 3D-musens standardvärden",
+  "ui.3d_mouse_restore_ask": "Vill du återställa 3D-musens inställningar till standard? Din kalibrering och knapptilldelning behålls.",
   "ui.3d_mouse_speed": "3D-musens hastighet",
+  "ui.3d_mouse_step_lift": "Lyft knappen uppåt, håll den och släpp sedan.",
+  "ui.3d_mouse_step_press": "Tryck ned knappen, håll den och släpp sedan.",
+  "ui.3d_mouse_step_pull": "Dra knappen mot dig, håll den och släpp sedan.",
+  "ui.3d_mouse_step_push": "Skjut knappen bort från dig, håll den och släpp sedan.",
+  "ui.3d_mouse_step_rest": "Ta bort handen från knappen och låt den vara stilla.",
+  "ui.3d_mouse_step_slide_left": "Skjut knappen åt vänster, håll den och släpp sedan.",
+  "ui.3d_mouse_step_slide_right": "Skjut knappen åt höger, håll den och släpp sedan.",
+  "ui.3d_mouse_step_tilt_left": "Luta knappen åt vänster (vänsterkanten nedåt), håll den och släpp sedan.",
+  "ui.3d_mouse_step_tilt_right": "Luta knappen åt höger (högerkanten nedåt), håll den och släpp sedan.",
+  "ui.3d_mouse_step_twist_clockwise": "Vrid knappen medurs, håll den och släpp sedan.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Vrid knappen moturs, håll den och släpp sedan.",
+  "ui.3d_mouse_waiting": "Väntar på rörelse",
+  "ui.3d_mouse_wiggle": "Om du har en ansluten, rör lite på den.",
   "ui.3d_sketch": "3D-skiss",
   "ui.activate": "Aktivera",
   "ui.active_component": "Aktiv komponent",
@@ -1502,6 +1555,7 @@
   "ui.grid_follows_view_hint": "Sidovyer visar rutnätet på det upprätta planet som vetter mot dem istället för marken",
   "ui.ground_shadow": "Markskugga",
   "ui.groupSelected": "Gruppera markerade",
+  "ui.hatch": "Skraffering",
   "ui.heading_add_ins": "TILLÄGG",
   "ui.heading_assemble": "MONTERA",
   "ui.heading_box": "LÅDA",
@@ -1792,34 +1846,6 @@
   "ui.smooth_wheel_zoom": "Jämn hjulzoom",
   "ui.smooth_wheel_zoom_tip": "Stäng av för att tillämpa varje hjulhändelse direkt, utan utjämningsfördröjning",
   "ui.snap": "Snappa",
-  "ui.space_mouse_calibrate": "Kalibrera…",
-  "ui.space_mouse_calibrate_tip": "Flytta knappen som fönstret ber om, så att SolidCraft lär sig åt vilket håll och hur långt varje axel på denna 3D-mus går. Sparas för denna 3D-mus.",
-  "ui.space_mouse_calibrate_title": "Kalibrera 3D-mus",
-  "ui.space_mouse_calibrated": "Kalibrerad",
-  "ui.space_mouse_calibration": "Kalibrering av 3D-mus",
-  "ui.space_mouse_calibration_done": "Klart. Spara den för att använda den när denna 3D-mus är ansluten.",
-  "ui.space_mouse_calibration_no_response": "En axel rörde sig knappt, så den kan inte kalibreras. Börja om och flytta knappen längre varje gång.",
-  "ui.space_mouse_dead_zone": "Dödzon",
-  "ui.space_mouse_dead_zone_tip": "Hur långt knappen måste röra sig innan vyn gör det, som andel av dess fulla rörelse. Höj den om vyn driver medan knappen vilar.",
-  "ui.space_mouse_forget": "Glöm kalibrering",
-  "ui.space_mouse_hint": "Flytta och rotera vyn tillsammans; skisser använder endast panorering och zoom.",
-  "ui.space_mouse_navigate": "Navigera med SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Ingen 3D-mus hittades",
-  "ui.space_mouse_not_calibrated": "Inte kalibrerad",
-  "ui.space_mouse_reading": "Avläsning",
-  "ui.space_mouse_step_lift": "Lyft knappen uppåt, håll den och släpp sedan.",
-  "ui.space_mouse_step_press": "Tryck ned knappen, håll den och släpp sedan.",
-  "ui.space_mouse_step_pull": "Dra knappen mot dig, håll den och släpp sedan.",
-  "ui.space_mouse_step_push": "Skjut knappen bort från dig, håll den och släpp sedan.",
-  "ui.space_mouse_step_rest": "Ta bort handen från knappen och låt den vara stilla.",
-  "ui.space_mouse_step_slide_left": "Skjut knappen åt vänster, håll den och släpp sedan.",
-  "ui.space_mouse_step_slide_right": "Skjut knappen åt höger, håll den och släpp sedan.",
-  "ui.space_mouse_step_tilt_back": "Luta knappen bakåt (framkanten uppåt), håll den och släpp sedan.",
-  "ui.space_mouse_step_tilt_forward": "Luta knappen framåt (framkanten nedåt), håll den och släpp sedan.",
-  "ui.space_mouse_step_tilt_left": "Luta knappen åt vänster (vänsterkanten nedåt), håll den och släpp sedan.",
-  "ui.space_mouse_step_tilt_right": "Luta knappen åt höger (högerkanten nedåt), håll den och släpp sedan.",
-  "ui.space_mouse_step_twist_clockwise": "Vrid knappen medurs, håll den och släpp sedan.",
-  "ui.space_mouse_step_twist_counterclockwise": "Vrid knappen moturs, håll den och släpp sedan.",
   "ui.spacing": "Avstånd",
   "ui.spacing_2": "Avstånd 2",
   "ui.sphere": "Sfär",

assets/locales/tr.json

@@ -72,6 +72,7 @@
   "Choose…": "Seç…",
   "Circular": "Dairesel",
   "Circumference": "Çevre",
+  "Clockwise": "Saat yönünde",
   "Close draft": "Taslağı kapat",
   "Collisions": "Çarpışmalar",
   "Colour": "Renk",
@@ -321,6 +322,7 @@
   "Search commands": "Komutlarda ara",
   "Search this library": "Bu kitaplıkta ara",
   "Section": "Kesit",
+  "Section position": "Kesit konumu",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Diğerini seç: İmlecin altındaki her şeyi listelemek için sol tuşu model üzerinde hareket ettirmeden basılı tutun (veya sağ tık › Diğerini seç…); oradaki bir sonraki öğeyi seçmek için aynı noktaya tekrar tıklayın. Başlangıç görünümüne dönmek için orta tuşla çift tıklayın (Ayarlar › Gezinme).",
   "Select bodies (a face picks its body)": "Gövdeleri seçin (bir yüz kendi gövdesini seçer)",
   "Select bodies or faces instead": "Bunun yerine gövde veya yüz seçin",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft bu tasarımlar kaydedilmeden önce kapandı. Son otomatik kayıtları açılabilir.",
   "Specialise": "Özelleştir",
   "Speed": "Hız",
+  "Square": "Kare",
   "Stand it up": "Dik çevir",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Dik çevir: X etrafında çeyrek tur; geri alınabilen tek bir Taşı özelliği olarak eklenir.",
   "Stand this part up?": "Bu parça dik çevrilsin mi?",
+  "Start angle": "Başlangıç açısı",
   "Start bulge": "Başlangıç şişkinliği",
   "Start continuity": "Başlangıç sürekliliği",
   "Step": "Adım",
@@ -411,6 +415,7 @@
   "angle, height": "açı, yükseklik",
   "appearance.dielectric_ior": "Dielektrik kırılma indisi",
   "appearance.metallic": "Metaliklik",
+  "appearance.only_available": "Yalnızca kullanılabilir görünümler",
   "appearance.pbr_help": "Bu yüzeyi Render'da veya bir ürün PNG'sinde görüntüleyin. Kırılma veya geçirgenlik yok.",
   "appearance.pbr_opaque": "Opak PBR",
   "appearance.roughness": "Pürüzlülük",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "STEP ekle",
   "cmd.file_save_mesh": "Ağ olarak kaydet",
   "cmd.file_slicers": "Yüklü dilimleyiciler",
+  "cmd.frame_member": "Çerçeve Elemanı",
+  "cmd.frame_profile_insert": "Profil Ekle",
+  "cmd.frame_profile_list": "Profil Kitaplığı",
+  "cmd.frame_profile_properties": "Profil Özellikleri",
   "cmd.inspect_accessibility": "Erişilebilirlik analizi",
   "cmd.inspect_center_of_mass": "Kütle merkezi",
   "cmd.inspect_clearance": "Açıklık",
@@ -568,6 +577,7 @@
   "cmd.material_create": "Yeni fiziksel malzeme",
   "cmd.material_delete": "Fiziksel malzemeyi sil",
   "cmd.material_edit": "Fiziksel malzemeyi düzenle",
+  "cmd.material_inspect": "Fiziksel malzemeyi incele",
   "cmd.material_list": "Malzemeleri listele",
   "cmd.material_properties_directional": "Yöne bağlı elastisite modülü",
   "cmd.material_properties_validate": "Fiziksel malzeme verilerini kontrol et",
@@ -1120,7 +1130,106 @@
   "trace.stopped_by_contact": "Örnek {sample} noktasında biter: {a}, {b} içinden geçecek",
   "trace.stopped_by_loop": "Örnek {sample} noktasında biter: {joint} üzerinden geçen döngü daha fazla kapanamaz",
   "ui.1_degree_of_freedom": "1 serbestlik derecesi",
+  "ui.3d_mouse_axes_reassigned": "Eksenler Tercihler'de yeniden atanmış; bu, bu kalibrasyonun üstüne de uygulanır.",
+  "ui.3d_mouse_button": "Düğme {number}",
+  "ui.3d_mouse_button_nothing": "Hiçbir şey",
+  "ui.3d_mouse_button_settings": "3B fare ayarları",
+  "ui.3d_mouse_buttons": "Düğmeler",
+  "ui.3d_mouse_buttons_hint": "Burada bulmak için 3B farenizdeki bir düğmeye basın, sonra ne yapacağını seçin.",
+  "ui.3d_mouse_buttons_no_device": "Düğmelerinin ne yapacağını seçmek için bir 3B fare bağlayın.",
+  "ui.3d_mouse_buttons_reset": "Varsayılan düğmelere dön",
+  "ui.3d_mouse_calibrate": "Kalibre et…",
+  "ui.3d_mouse_calibrate_tip": "Pencerenin istediği gibi başlığı hareket ettirin; SolidCraft bu 3B farenin her ekseninin hangi yöne ve ne kadar gittiğini öğrensin. Bu 3B fare için kaydedilir.",
+  "ui.3d_mouse_calibrate_title": "3B fareyi kalibre et",
+  "ui.3d_mouse_calibrate_wait": "SolidCraft'ın görebilmesi için 3D fareyi bir kez hareket ettirin.",
+  "ui.3d_mouse_calibrated": "Kalibre edildi",
+  "ui.3d_mouse_calibration": "3B fare kalibrasyonu",
+  "ui.3d_mouse_calibration_done": "Bitti. Bu 3B fare her bağlandığında kullanılması için kaydedin.",
+  "ui.3d_mouse_calibration_no_response": "Bir eksen neredeyse hiç hareket etmedi, bu yüzden kalibre edilemiyor. Baştan başlayın ve başlığı her seferinde daha fazla hareket ettirin.",
+  "ui.3d_mouse_circles_help": "Daireler, aygıtın kalibrasyondan sonra gönderdiğini gösterir. Test modeli, görünümün bunu ters çevirme, hız ve eksen atamasından sonra ne yaptığını gösterir.",
+  "ui.3d_mouse_dead_zone": "Ölü bölge",
+  "ui.3d_mouse_dead_zone_tip": "Görünüm hareket etmeden önce başlığın ne kadar hareket etmesi gerektiği, tam hareket aralığının oranı olarak. Başlık dururken görünüm kayıyorsa artırın.",
+  "ui.3d_mouse_denied": "SolidCraft bir 3D fare görüyor ama onu okumasına izin verilmiyor. udev kuralı için 3D fare kurulum notlarına bakın.",
+  "ui.3d_mouse_denied_short": "Bulundu, ancak okunamıyor",
+  "ui.3d_mouse_driven_by": "Bu ekseni cihazın hangi kalibre edilmiş hareketinin yönettiği. Başka bir eksenin zaten kullandığını seçerseniz ikisi yer değiştirir.",
+  "ui.3d_mouse_driven_by_label": "kumanda eden",
+  "ui.3d_mouse_driver": "3B fare sürücüsü",
+  "ui.3d_mouse_driver_auto": "Otomatik",
+  "ui.3d_mouse_driver_direct": "Doğrudan (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Şimdilik spacenavd üzerinden okunuyor: aygıtın kendisi açılamadı.",
+  "ui.3d_mouse_driver_only_direct": "Aygıt doğrudan okunuyor; spacenavd çalışmıyor",
+  "ui.3d_mouse_driver_only_spacenavd": "spacenavd üzerinden okunuyor, tek seçenek bu",
+  "ui.3d_mouse_forget": "Kalibrasyonu unut",
+  "ui.3d_mouse_ghost_left_viewport": "Sol görünüm",
+  "ui.3d_mouse_ghost_left_window": "Sol pencere",
+  "ui.3d_mouse_ghost_position": "Konum",
+  "ui.3d_mouse_ghost_right_viewport": "Sağ görünüm",
+  "ui.3d_mouse_hint": "Görünümü aynı anda kaydırın ve döndürün; eskizlerde yalnızca kaydırma ve yakınlaştırma kullanılır.",
+  "ui.3d_mouse_kind_cap": "Merkeze dönüş",
+  "ui.3d_mouse_kind_question": "Ne tür bir 3B fare?",
+  "ui.3d_mouse_kind_trackball": "İztopu",
+  "ui.3d_mouse_looks_like_cap": "Tuttuğunuz sürece değer yerinde kalıyor, “Merkeze dönüş” türü bir aygıttaki gibi.",
+  "ui.3d_mouse_looks_like_trackball": "Hareketi bırakır bırakmaz değer geri dönüyor, iztopunda olduğu gibi.",
+  "ui.3d_mouse_motion_rotation_x": "Dönme X",
+  "ui.3d_mouse_motion_rotation_y": "Dönme Y",
+  "ui.3d_mouse_motion_rotation_z": "Dönme Z",
+  "ui.3d_mouse_motion_translation_x": "Öteleme X",
+  "ui.3d_mouse_motion_translation_y": "Öteleme Y",
+  "ui.3d_mouse_motion_translation_z": "Öteleme Z",
+  "ui.3d_mouse_navigate": "3D fare ile gezin",
+  "ui.3d_mouse_none": "3B fare bulunamadı",
+  "ui.3d_mouse_not_calibrated": "Kalibre edilmedi",
+  "ui.3d_mouse_offer": "3D farenizi kalibre etmek, yer değiştirmiş veya ters dönmüş eksenleri düzeltir; hızını ve hissini ayarlar.",
+  "ui.3d_mouse_offer_never": "Bir daha gösterme",
+  "ui.3d_mouse_offer_swap": "Hidraw'a geç (doğrudan sürücü)",
+  "ui.3d_mouse_reading": "Okunan değer",
+  "ui.3d_mouse_reset_axes": "Eksen atamasını sıfırla",
+  "ui.3d_mouse_reset_view": "Görünümü sıfırla",
+  "ui.3d_mouse_restore": "3D fare varsayılanlarını geri yükle",
+  "ui.3d_mouse_restore_ask": "3D fare ayarları varsayılanlara döndürülsün mü? Kalibrasyon ve düğme eşlemesi korunur.",
+  "ui.3d_mouse_section": "3D fare",
+  "ui.3d_mouse_show_in_view": "3B fareyi 3B görünümde göster",
+  "ui.3d_mouse_show_in_view_tip": "Sol alt köşede, siz hareket ettirdikçe hareket eden bir 3B fare resmi.",
+  "ui.3d_mouse_skip": "Cihazım bunu yapamıyor",
+  "ui.3d_mouse_skip_tip": "Bu hareketi iki yönde de atlar; kalibrasyon onu dışarıda bırakır.",
   "ui.3d_mouse_speed": "3D fare hızı",
+  "ui.3d_mouse_step_lift": "Başlığı yukarı kaldırın, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_press": "Başlığı aşağı bastırın, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_pull": "Başlığı kendinize doğru çekin, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_push": "Başlığı sizden uzağa itin, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_rest": "Elinizi başlıktan çekin ve hareketsiz bırakın.",
+  "ui.3d_mouse_step_rest_trackball": "Elinizi toptan çekin ve hareketsiz bırakın.",
+  "ui.3d_mouse_step_ring_clockwise": "Kaydırma halkasını saat yönünde birkaç tık çevirin.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Kaydırma halkasını saat yönünün tersine birkaç tık çevirin.",
+  "ui.3d_mouse_step_roll_away": "Topu birkaç kez sizden uzağa yuvarlayın, sonra durmasını bekleyin.",
+  "ui.3d_mouse_step_roll_left": "Topu birkaç kez sola yuvarlayın, sonra durmasını bekleyin.",
+  "ui.3d_mouse_step_roll_right": "Topu birkaç kez sağa yuvarlayın, sonra durmasını bekleyin.",
+  "ui.3d_mouse_step_roll_toward": "Topu birkaç kez kendinize doğru yuvarlayın, sonra durmasını bekleyin.",
+  "ui.3d_mouse_step_slide_left": "Başlığı sola kaydırın, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_slide_right": "Başlığı sağa kaydırın, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_spin_clockwise": "Topu birkaç kez saat yönünde döndürün, sonra durmasını bekleyin.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Topu birkaç kez saat yönünün tersine döndürün, sonra durmasını bekleyin.",
+  "ui.3d_mouse_step_tilt_away": "Başlığın üstünü sizden uzağa eğin (size en yakın kenar yukarı kalkar), tutun, sonra bırakın.",
+  "ui.3d_mouse_step_tilt_left": "Başlığı sola eğin (sol kenar aşağı), tutun, sonra bırakın.",
+  "ui.3d_mouse_step_tilt_right": "Başlığı sağa eğin (sağ kenar aşağı), tutun, sonra bırakın.",
+  "ui.3d_mouse_step_tilt_toward": "Başlığın üstünü kendinize doğru eğin (size en yakın kenar aşağı iner), tutun, sonra bırakın.",
+  "ui.3d_mouse_step_touch": "Elinizi başlığa itmeden koyun.",
+  "ui.3d_mouse_step_twist_clockwise": "Başlığı saat yönünde çevirin, tutun, sonra bırakın.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Başlığı saat yönünün tersine çevirin, tutun, sonra bırakın.",
+  "ui.3d_mouse_switch_cap": "Merkeze dönüş olarak kalibre et",
+  "ui.3d_mouse_switch_trackball": "İztopu olarak kalibre et",
+  "ui.3d_mouse_view_axis": "Görünüm ekseni",
+  "ui.3d_mouse_view_off": "Kapalı",
+  "ui.3d_mouse_view_off_tip": "3D fare sürücüsünün profili bu ekseni kapatıyor, bu yüzden hareketi görünümü oynatmaz. Burada başka bir eksenin hareketini seçerseniz ikisi yer değiştirir ve o hareket görünümü oynatmayı bırakır.",
+  "ui.3d_mouse_view_orbit_sideways": "Sola / sağa yörünge",
+  "ui.3d_mouse_view_orbit_up_down": "Yukarı / aşağı yörünge",
+  "ui.3d_mouse_view_pan_sideways": "Sola / sağa kaydır",
+  "ui.3d_mouse_view_pan_up_down": "Yukarı / aşağı kaydır",
+  "ui.3d_mouse_view_roll": "Yuvarlanma",
+  "ui.3d_mouse_view_unmapped": "Eksen {n}",
+  "ui.3d_mouse_view_zoom": "Yakınlaştır",
+  "ui.3d_mouse_waiting": "Hareket bekleniyor",
+  "ui.3d_mouse_wiggle": "Takılı bir tane varsa biraz oynatın.",
   "ui.3d_sketch": "3D eskiz",
   "ui.activate": "Etkinleştir",
   "ui.active_component": "Etkin bileşen",
@@ -1350,6 +1459,7 @@
   "ui.blocked": "Engellenmiş",
   "ui.bodies": "Gövdeler",
   "ui.bodies_all_if_none": "Gövdeler (yoksa tümü)",
+  "ui.bottom": "Alt",
   "ui.box": "Kutu",
   "ui.break": "Kır",
   "ui.browser_bodies_one": "{count} gövde",
@@ -1502,6 +1612,7 @@
   "ui.grid_follows_view_hint": "Yan görünümlerde ızgara, zemin yerine onlara bakan dik düzlemde gösterilir",
   "ui.ground_shadow": "Zemin gölgesi",
   "ui.groupSelected": "Seçimi grupla",
+  "ui.hatch": "Tarama",
   "ui.heading_add_ins": "EKLENTİLER",
   "ui.heading_assemble": "MONTAJ",
   "ui.heading_box": "KUTU",
@@ -1792,59 +1903,6 @@
   "ui.smooth_wheel_zoom": "Yumuşak tekerlek yakınlaştırması",
   "ui.smooth_wheel_zoom_tip": "Her tekerlek hareketini yumuşatma olmadan hemen uygulamak için kapatın",
   "ui.snap": "Yakala",
-  "ui.space_mouse_axes_reassigned": "Eksenler Tercihler'de yeniden atanmış; bu, bu kalibrasyonun üstüne de uygulanır.",
-  "ui.space_mouse_calibrate": "Kalibre et…",
-  "ui.space_mouse_calibrate_tip": "Pencerenin istediği gibi başlığı hareket ettirin; SolidCraft bu 3B farenin her ekseninin hangi yöne ve ne kadar gittiğini öğrensin. Bu 3B fare için kaydedilir.",
-  "ui.space_mouse_calibrate_title": "3B fareyi kalibre et",
-  "ui.space_mouse_calibrated": "Kalibre edildi",
-  "ui.space_mouse_calibration": "3B fare kalibrasyonu",
-  "ui.space_mouse_calibration_done": "Bitti. Bu 3B fare her bağlandığında kullanılması için kaydedin.",
-  "ui.space_mouse_calibration_no_response": "Bir eksen neredeyse hiç hareket etmedi, bu yüzden kalibre edilemiyor. Baştan başlayın ve başlığı her seferinde daha fazla hareket ettirin.",
-  "ui.space_mouse_dead_zone": "Ölü bölge",
-  "ui.space_mouse_dead_zone_tip": "Görünüm hareket etmeden önce başlığın ne kadar hareket etmesi gerektiği, tam hareket aralığının oranı olarak. Başlık dururken görünüm kayıyorsa artırın.",
-  "ui.space_mouse_driven_by": "Bu ekseni cihazın hangi kalibre edilmiş hareketinin yönettiği. Başka bir eksenin zaten kullandığını seçerseniz ikisi yer değiştirir.",
-  "ui.space_mouse_driven_by_label": "kumanda eden",
-  "ui.space_mouse_driver": "3B fare sürücüsü",
-  "ui.space_mouse_driver_auto": "Otomatik",
-  "ui.space_mouse_driver_direct": "Doğrudan (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Aygıt doğrudan okunuyor; spacenavd çalışmıyor",
-  "ui.space_mouse_driver_only_spacenavd": "spacenavd üzerinden okunuyor, tek seçenek bu",
-  "ui.space_mouse_forget": "Kalibrasyonu unut",
-  "ui.space_mouse_hint": "Görünümü aynı anda kaydırın ve döndürün; eskizlerde yalnızca kaydırma ve yakınlaştırma kullanılır.",
-  "ui.space_mouse_motion_rotation_x": "Dönme X",
-  "ui.space_mouse_motion_rotation_y": "Dönme Y",
-  "ui.space_mouse_motion_rotation_z": "Dönme Z",
-  "ui.space_mouse_motion_translation_x": "Öteleme X",
-  "ui.space_mouse_motion_translation_y": "Öteleme Y",
-  "ui.space_mouse_motion_translation_z": "Öteleme Z",
-  "ui.space_mouse_navigate": "SpaceNavigator / SpaceMouse ile gezin",
-  "ui.space_mouse_none": "3B fare bulunamadı",
-  "ui.space_mouse_not_calibrated": "Kalibre edilmedi",
-  "ui.space_mouse_reading": "Okunan değer",
-  "ui.space_mouse_reset_axes": "Eksen atamasını sıfırla",
-  "ui.space_mouse_step_lift": "Başlığı yukarı kaldırın, tutun, sonra bırakın.",
-  "ui.space_mouse_step_press": "Başlığı aşağı bastırın, tutun, sonra bırakın.",
-  "ui.space_mouse_step_pull": "Başlığı kendinize doğru çekin, tutun, sonra bırakın.",
-  "ui.space_mouse_step_push": "Başlığı sizden uzağa itin, tutun, sonra bırakın.",
-  "ui.space_mouse_step_rest": "Elinizi başlıktan çekin ve hareketsiz bırakın.",
-  "ui.space_mouse_step_slide_left": "Başlığı sola kaydırın, tutun, sonra bırakın.",
-  "ui.space_mouse_step_slide_right": "Başlığı sağa kaydırın, tutun, sonra bırakın.",
-  "ui.space_mouse_step_tilt_back": "Başlığı geriye eğin (ön kenar yukarı), tutun, sonra bırakın.",
-  "ui.space_mouse_step_tilt_forward": "Başlığı öne eğin (ön kenar aşağı), tutun, sonra bırakın.",
-  "ui.space_mouse_step_tilt_left": "Başlığı sola eğin (sol kenar aşağı), tutun, sonra bırakın.",
-  "ui.space_mouse_step_tilt_right": "Başlığı sağa eğin (sağ kenar aşağı), tutun, sonra bırakın.",
-  "ui.space_mouse_step_twist_clockwise": "Başlığı saat yönünde çevirin, tutun, sonra bırakın.",
-  "ui.space_mouse_step_twist_counterclockwise": "Başlığı saat yönünün tersine çevirin, tutun, sonra bırakın.",
-  "ui.space_mouse_view_axis": "Görünüm ekseni",
-  "ui.space_mouse_view_off": "Kapalı",
-  "ui.space_mouse_view_off_tip": "3D fare sürücüsünün profili bu ekseni kapatıyor, bu yüzden hareketi görünümü oynatmaz. Burada başka bir eksenin hareketini seçerseniz ikisi yer değiştirir ve o hareket görünümü oynatmayı bırakır.",
-  "ui.space_mouse_view_orbit_sideways": "Sola / sağa yörünge",
-  "ui.space_mouse_view_orbit_up_down": "Yukarı / aşağı yörünge",
-  "ui.space_mouse_view_pan_sideways": "Sola / sağa kaydır",
-  "ui.space_mouse_view_pan_up_down": "Yukarı / aşağı kaydır",
-  "ui.space_mouse_view_roll": "Yuvarlanma",
-  "ui.space_mouse_view_unmapped": "Eksen {n}",
-  "ui.space_mouse_view_zoom": "Yakınlaştır",
   "ui.spacing": "Aralık",
   "ui.spacing_2": "Aralık 2",
   "ui.sphere": "Küre",

assets/locales/uk.json

@@ -72,6 +72,7 @@
   "Choose…": "Вибрати…",
   "Circular": "Круговий",
   "Circumference": "Довжина кола",
+  "Clockwise": "За годинниковою стрілкою",
   "Close draft": "Закрити чернетку",
   "Collisions": "Зіткнення",
   "Colour": "Колір",
@@ -322,6 +323,7 @@
   "Search commands": "Пошук команд",
   "Search this library": "Пошук у цій бібліотеці",
   "Section": "Переріз",
+  "Section position": "Положення перерізу",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Вибір іншого: утримуйте ліву кнопку нерухомо на моделі (або клацніть правою › Вибрати інше…), щоб побачити список усього під курсором; клацніть ще раз у тому ж місці, щоб вибрати наступний об'єкт там. Двічі клацніть середньою кнопкою, щоб перейти до головного виду (Налаштування › Навігація).",
   "Select bodies (a face picks its body)": "Виділяти тіла (грань виділяє своє тіло)",
   "Select bodies or faces instead": "Натомість виділіть тіла або грані",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft закрився до того, як ці проєкти було збережено. Можна відкрити їхнє останнє автозбереження.",
   "Specialise": "Спеціалізувати",
   "Speed": "Швидкість",
+  "Square": "Квадрат",
   "Stand it up": "Вирівняти",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Вирівняти: поворот на чверть оберту навколо X як одна операція переміщення, яку можна скасувати.",
   "Stand this part up?": "Вирівняти цю деталь?",
+  "Start angle": "Початковий кут",
   "Start bulge": "Роздуття початку",
   "Start continuity": "Неперервність початку",
   "Step": "Крок",
@@ -412,6 +416,7 @@
   "angle, height": "кут, висота",
   "appearance.dielectric_ior": "Діелектричний IOR",
   "appearance.metallic": "Металевість",
+  "appearance.only_available": "Лише доступні зовнішні вигляди",
   "appearance.pbr_help": "Перегляньте цю поверхню в режимі рендерингу або як PNG-зображення виробу. Без заломлення чи пропускання.",
   "appearance.pbr_opaque": "Непрозорий PBR",
   "appearance.roughness": "Шорсткість",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Вставити STEP",
   "cmd.file_save_mesh": "Зберегти як сітку",
   "cmd.file_slicers": "Встановлені слайсери",
+  "cmd.frame_member": "Елемент рами",
+  "cmd.frame_profile_insert": "Вставити профіль",
+  "cmd.frame_profile_list": "Бібліотека профілів",
+  "cmd.frame_profile_properties": "Властивості профілю",
   "cmd.inspect_accessibility": "Аналіз доступності",
   "cmd.inspect_center_of_mass": "Центр мас",
   "cmd.inspect_clearance": "Зазор",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Новий фізичний матеріал",
   "cmd.material_delete": "Видалити фізичний матеріал",
   "cmd.material_edit": "Редагувати фізичний матеріал",
+  "cmd.material_inspect": "Перевірити фізичний матеріал",
   "cmd.material_list": "Список матеріалів",
   "cmd.material_properties_directional": "Спрямований модуль пружності",
   "cmd.material_properties_validate": "Перевірити дані фізичного матеріалу",
@@ -1121,7 +1131,106 @@
   "trace.stopped_by_contact": "Закінчується на відліку {sample}: {a} пройшов би крізь {b}",
   "trace.stopped_by_loop": "Закінчується на відліку {sample}: контур через {joint} далі не замикається",
   "ui.1_degree_of_freedom": "1 ступінь вільності",
+  "ui.3d_mouse_axes_reassigned": "Осі перепризначено в налаштуваннях, і це діє й поверх цього калібрування.",
+  "ui.3d_mouse_button": "Кнопка {number}",
+  "ui.3d_mouse_button_nothing": "Нічого",
+  "ui.3d_mouse_button_settings": "Налаштування 3D-миші",
+  "ui.3d_mouse_buttons": "Кнопки",
+  "ui.3d_mouse_buttons_hint": "Натисніть кнопку на 3D-миші, щоб знайти її тут, і виберіть, що вона робить.",
+  "ui.3d_mouse_buttons_no_device": "Під'єднайте 3D-мишу, щоб призначити її кнопки.",
+  "ui.3d_mouse_buttons_reset": "Повернути типові кнопки",
+  "ui.3d_mouse_calibrate": "Калібрувати…",
+  "ui.3d_mouse_calibrate_tip": "Рухайте ковпачок так, як просить вікно, щоб SolidCraft дізнався, куди й наскільки далеко рухається кожна вісь цієї 3D-миші. Зберігається для цієї 3D-миші.",
+  "ui.3d_mouse_calibrate_title": "Калібрування 3D-миші",
+  "ui.3d_mouse_calibrate_wait": "Один раз порухайте 3D-мишу, щоб SolidCraft її побачив.",
+  "ui.3d_mouse_calibrated": "Відкалібровано",
+  "ui.3d_mouse_calibration": "Калібрування 3D-миші",
+  "ui.3d_mouse_calibration_done": "Готово. Збережіть його, щоб воно застосовувалося щоразу, коли підключено цю 3D-мишу.",
+  "ui.3d_mouse_calibration_no_response": "Одна вісь майже не зрушила, тому її не можна відкалібрувати. Почніть спочатку й щоразу рухайте ковпачок далі.",
+  "ui.3d_mouse_circles_help": "Кола показують, що пристрій надсилає після калібрування. Тестова модель показує, що вигляд робить із цим після інверсії, швидкості та призначення осей.",
+  "ui.3d_mouse_dead_zone": "Мертва зона",
+  "ui.3d_mouse_dead_zone_tip": "Наскільки треба зсунути ковпачок, перш ніж зрушить вигляд, у частці від повного ходу. Збільште, якщо вигляд зміщується, коли ковпачок у спокої.",
+  "ui.3d_mouse_denied": "SolidCraft бачить 3D-мишу, але не має права її читати. Правило udev описано в нотатках із налаштування 3D-миші.",
+  "ui.3d_mouse_denied_short": "Знайдено, але не читається",
+  "ui.3d_mouse_driven_by": "Який відкалібрований рух пристрою керує цією віссю. Якщо вибрати рух, який уже використовує інша вісь, вони поміняються місцями.",
+  "ui.3d_mouse_driven_by_label": "керується",
+  "ui.3d_mouse_driver": "Драйвер 3D-миші",
+  "ui.3d_mouse_driver_auto": "Автоматично",
+  "ui.3d_mouse_driver_direct": "Напряму (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Наразі читання йде через spacenavd: сам пристрій відкрити не вдалося.",
+  "ui.3d_mouse_driver_only_direct": "Читання напряму з пристрою; spacenavd не запущено",
+  "ui.3d_mouse_driver_only_spacenavd": "Читання через spacenavd, інших варіантів немає",
+  "ui.3d_mouse_forget": "Забути калібрування",
+  "ui.3d_mouse_ghost_left_viewport": "Ліворуч у вікні перегляду",
+  "ui.3d_mouse_ghost_left_window": "Ліворуч у вікні",
+  "ui.3d_mouse_ghost_position": "Розташування",
+  "ui.3d_mouse_ghost_right_viewport": "Праворуч у вікні перегляду",
+  "ui.3d_mouse_hint": "Переміщуйте й обертайте вид разом; в ескізах доступні лише панорамування та масштаб.",
+  "ui.3d_mouse_kind_cap": "Повернення до центру",
+  "ui.3d_mouse_kind_question": "Яка у вас 3D-миша?",
+  "ui.3d_mouse_kind_trackball": "Трекбол",
+  "ui.3d_mouse_looks_like_cap": "Значення тримається, поки ви утримуєте, — як у пристрою типу «Повернення до центру».",
+  "ui.3d_mouse_looks_like_trackball": "Значення повертається, щойно ви зупиняєтеся, — як у трекбола.",
+  "ui.3d_mouse_motion_rotation_x": "Обертання X",
+  "ui.3d_mouse_motion_rotation_y": "Обертання Y",
+  "ui.3d_mouse_motion_rotation_z": "Обертання Z",
+  "ui.3d_mouse_motion_translation_x": "Зміщення X",
+  "ui.3d_mouse_motion_translation_y": "Зміщення Y",
+  "ui.3d_mouse_motion_translation_z": "Зміщення Z",
+  "ui.3d_mouse_navigate": "Навігація за допомогою 3D-миші",
+  "ui.3d_mouse_none": "3D-мишу не знайдено",
+  "ui.3d_mouse_not_calibrated": "Не відкалібровано",
+  "ui.3d_mouse_offer": "Калібрування 3D-миші виправляє переплутані або обернені осі та налаштовує швидкість і відчуття.",
+  "ui.3d_mouse_offer_never": "Більше не показувати",
+  "ui.3d_mouse_offer_swap": "Перемкнути на Hidraw (прямий драйвер)",
+  "ui.3d_mouse_reading": "Показники",
+  "ui.3d_mouse_reset_axes": "Скинути призначення осей",
+  "ui.3d_mouse_reset_view": "Скинути вигляд",
+  "ui.3d_mouse_restore": "Відновити налаштування 3D-миші",
+  "ui.3d_mouse_restore_ask": "Повернути налаштування 3D-миші до типових? Калібрування і призначення кнопок залишаться.",
+  "ui.3d_mouse_section": "3D-миша",
+  "ui.3d_mouse_show_in_view": "Показувати 3D-мишу в 3D-вигляді",
+  "ui.3d_mouse_show_in_view_tip": "Зображення вашої 3D-миші в лівому нижньому куті, що рухається разом із нею.",
+  "ui.3d_mouse_skip": "Мій пристрій так не вміє",
+  "ui.3d_mouse_skip_tip": "Пропускає цей рух в обидва боки; калібрування його не враховує.",
   "ui.3d_mouse_speed": "Швидкість 3D-миші",
+  "ui.3d_mouse_step_lift": "Підніміть ковпачок угору, утримайте й відпустіть.",
+  "ui.3d_mouse_step_press": "Натисніть ковпачок униз, утримайте й відпустіть.",
+  "ui.3d_mouse_step_pull": "Потягніть ковпачок до себе, утримайте й відпустіть.",
+  "ui.3d_mouse_step_push": "Штовхніть ковпачок від себе, утримайте й відпустіть.",
+  "ui.3d_mouse_step_rest": "Приберіть руку з ковпачка й не торкайтеся його.",
+  "ui.3d_mouse_step_rest_trackball": "Приберіть руку з кулі й не торкайтеся її.",
+  "ui.3d_mouse_step_ring_clockwise": "Поверніть кільце прокручування на кілька клацань за годинниковою стрілкою.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Поверніть кільце прокручування на кілька клацань проти годинникової стрілки.",
+  "ui.3d_mouse_step_roll_away": "Прокотіть кулю від себе кілька разів і дайте їй зупинитися.",
+  "ui.3d_mouse_step_roll_left": "Прокотіть кулю ліворуч кілька разів і дайте їй зупинитися.",
+  "ui.3d_mouse_step_roll_right": "Прокотіть кулю праворуч кілька разів і дайте їй зупинитися.",
+  "ui.3d_mouse_step_roll_toward": "Прокотіть кулю до себе кілька разів і дайте їй зупинитися.",
+  "ui.3d_mouse_step_slide_left": "Зсуньте ковпачок ліворуч, утримайте й відпустіть.",
+  "ui.3d_mouse_step_slide_right": "Зсуньте ковпачок праворуч, утримайте й відпустіть.",
+  "ui.3d_mouse_step_spin_clockwise": "Покрутіть кулю за годинниковою стрілкою кілька разів і дайте їй зупинитися.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Покрутіть кулю проти годинникової стрілки кілька разів і дайте їй зупинитися.",
+  "ui.3d_mouse_step_tilt_away": "Нахиліть верх ковпачка від себе (ближній край піднімається), утримайте й відпустіть.",
+  "ui.3d_mouse_step_tilt_left": "Нахиліть ковпачок ліворуч (лівий край униз), утримайте й відпустіть.",
+  "ui.3d_mouse_step_tilt_right": "Нахиліть ковпачок праворуч (правий край униз), утримайте й відпустіть.",
+  "ui.3d_mouse_step_tilt_toward": "Нахиліть верх ковпачка до себе (ближній край опускається), утримайте й відпустіть.",
+  "ui.3d_mouse_step_touch": "Покладіть руку на ковпачок, не натискаючи на нього.",
+  "ui.3d_mouse_step_twist_clockwise": "Поверніть ковпачок за годинниковою стрілкою, утримайте й відпустіть.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Поверніть ковпачок проти годинникової стрілки, утримайте й відпустіть.",
+  "ui.3d_mouse_switch_cap": "Калібрувати як повернення до центру",
+  "ui.3d_mouse_switch_trackball": "Калібрувати як трекбол",
+  "ui.3d_mouse_view_axis": "Вісь вигляду",
+  "ui.3d_mouse_view_off": "Вимк.",
+  "ui.3d_mouse_view_off_tip": "Профіль драйвера 3D-миші вимикає цю вісь, тож її рух не рухає вигляд. Якщо вибрати тут рух іншої осі, вони поміняються місцями, і цей рух перестане рухати вигляд.",
+  "ui.3d_mouse_view_orbit_sideways": "Орбіта ліворуч / праворуч",
+  "ui.3d_mouse_view_orbit_up_down": "Орбіта вгору / вниз",
+  "ui.3d_mouse_view_pan_sideways": "Зсув ліворуч / праворуч",
+  "ui.3d_mouse_view_pan_up_down": "Зсув угору / вниз",
+  "ui.3d_mouse_view_roll": "Крен",
+  "ui.3d_mouse_view_unmapped": "Вісь {n}",
+  "ui.3d_mouse_view_zoom": "Масштаб",
+  "ui.3d_mouse_waiting": "Очікування руху",
+  "ui.3d_mouse_wiggle": "Якщо 3D-миша підключена, трохи порухайте нею.",
   "ui.3d_sketch": "3D-ескіз",
   "ui.activate": "Активувати",
   "ui.active_component": "Активний компонент",
@@ -1351,6 +1460,7 @@
   "ui.blocked": "Заблоковані",
   "ui.bodies": "Тіла",
   "ui.bodies_all_if_none": "Тіла (усі, якщо не вибрано)",
+  "ui.bottom": "Знизу",
   "ui.box": "Куб",
   "ui.break": "Розірвати",
   "ui.browser_bodies_one": "{count} тіло",
@@ -1503,6 +1613,7 @@
   "ui.grid_follows_view_hint": "Бічні види показують сітку на вертикальній площині, повернутій до них, а не на землі",
   "ui.ground_shadow": "Тінь на землі",
   "ui.groupSelected": "Згрупувати виділене",
+  "ui.hatch": "Штрихування",
   "ui.heading_add_ins": "НАДБУДОВИ",
   "ui.heading_assemble": "СКЛАДАННЯ",
   "ui.heading_box": "КУБ",
@@ -1793,59 +1904,6 @@
   "ui.smooth_wheel_zoom": "Плавне масштабування колесом",
   "ui.smooth_wheel_zoom_tip": "Вимкніть, щоб застосовувати кожну подію колеса негайно, без плавного завершення",
   "ui.snap": "Прив'язка",
-  "ui.space_mouse_axes_reassigned": "Осі перепризначено в налаштуваннях, і це діє й поверх цього калібрування.",
-  "ui.space_mouse_calibrate": "Калібрувати…",
-  "ui.space_mouse_calibrate_tip": "Рухайте ковпачок так, як просить вікно, щоб SolidCraft дізнався, куди й наскільки далеко рухається кожна вісь цієї 3D-миші. Зберігається для цієї 3D-миші.",
-  "ui.space_mouse_calibrate_title": "Калібрування 3D-миші",
-  "ui.space_mouse_calibrated": "Відкалібровано",
-  "ui.space_mouse_calibration": "Калібрування 3D-миші",
-  "ui.space_mouse_calibration_done": "Готово. Збережіть його, щоб воно застосовувалося щоразу, коли підключено цю 3D-мишу.",
-  "ui.space_mouse_calibration_no_response": "Одна вісь майже не зрушила, тому її не можна відкалібрувати. Почніть спочатку й щоразу рухайте ковпачок далі.",
-  "ui.space_mouse_dead_zone": "Мертва зона",
-  "ui.space_mouse_dead_zone_tip": "Наскільки треба зсунути ковпачок, перш ніж зрушить вигляд, у частці від повного ходу. Збільште, якщо вигляд зміщується, коли ковпачок у спокої.",
-  "ui.space_mouse_driven_by": "Який відкалібрований рух пристрою керує цією віссю. Якщо вибрати рух, який уже використовує інша вісь, вони поміняються місцями.",
-  "ui.space_mouse_driven_by_label": "керується",
-  "ui.space_mouse_driver": "Драйвер 3D-миші",
-  "ui.space_mouse_driver_auto": "Автоматично",
-  "ui.space_mouse_driver_direct": "Напряму (hidraw)",
-  "ui.space_mouse_driver_only_direct": "Читання напряму з пристрою; spacenavd не запущено",
-  "ui.space_mouse_driver_only_spacenavd": "Читання через spacenavd, інших варіантів немає",
-  "ui.space_mouse_forget": "Забути калібрування",
-  "ui.space_mouse_hint": "Переміщуйте й обертайте вид разом; в ескізах доступні лише панорамування та масштаб.",
-  "ui.space_mouse_motion_rotation_x": "Обертання X",
-  "ui.space_mouse_motion_rotation_y": "Обертання Y",
-  "ui.space_mouse_motion_rotation_z": "Обертання Z",
-  "ui.space_mouse_motion_translation_x": "Зміщення X",
-  "ui.space_mouse_motion_translation_y": "Зміщення Y",
-  "ui.space_mouse_motion_translation_z": "Зміщення Z",
-  "ui.space_mouse_navigate": "Навігація за допомогою SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "3D-мишу не знайдено",
-  "ui.space_mouse_not_calibrated": "Не відкалібровано",
-  "ui.space_mouse_reading": "Показники",
-  "ui.space_mouse_reset_axes": "Скинути призначення осей",
-  "ui.space_mouse_step_lift": "Підніміть ковпачок угору, утримайте й відпустіть.",
-  "ui.space_mouse_step_press": "Натисніть ковпачок униз, утримайте й відпустіть.",
-  "ui.space_mouse_step_pull": "Потягніть ковпачок до себе, утримайте й відпустіть.",
-  "ui.space_mouse_step_push": "Штовхніть ковпачок від себе, утримайте й відпустіть.",
-  "ui.space_mouse_step_rest": "Приберіть руку з ковпачка й не торкайтеся його.",
-  "ui.space_mouse_step_slide_left": "Зсуньте ковпачок ліворуч, утримайте й відпустіть.",
-  "ui.space_mouse_step_slide_right": "Зсуньте ковпачок праворуч, утримайте й відпустіть.",
-  "ui.space_mouse_step_tilt_back": "Нахиліть ковпачок назад (передній край угору), утримайте й відпустіть.",
-  "ui.space_mouse_step_tilt_forward": "Нахиліть ковпачок уперед (передній край униз), утримайте й відпустіть.",
-  "ui.space_mouse_step_tilt_left": "Нахиліть ковпачок ліворуч (лівий край униз), утримайте й відпустіть.",
-  "ui.space_mouse_step_tilt_right": "Нахиліть ковпачок праворуч (правий край униз), утримайте й відпустіть.",
-  "ui.space_mouse_step_twist_clockwise": "Поверніть ковпачок за годинниковою стрілкою, утримайте й відпустіть.",
-  "ui.space_mouse_step_twist_counterclockwise": "Поверніть ковпачок проти годинникової стрілки, утримайте й відпустіть.",
-  "ui.space_mouse_view_axis": "Вісь вигляду",
-  "ui.space_mouse_view_off": "Вимк.",
-  "ui.space_mouse_view_off_tip": "Профіль драйвера 3D-миші вимикає цю вісь, тож її рух не рухає вигляд. Якщо вибрати тут рух іншої осі, вони поміняються місцями, і цей рух перестане рухати вигляд.",
-  "ui.space_mouse_view_orbit_sideways": "Орбіта ліворуч / праворуч",
-  "ui.space_mouse_view_orbit_up_down": "Орбіта вгору / вниз",
-  "ui.space_mouse_view_pan_sideways": "Зсув ліворуч / праворуч",
-  "ui.space_mouse_view_pan_up_down": "Зсув угору / вниз",
-  "ui.space_mouse_view_roll": "Крен",
-  "ui.space_mouse_view_unmapped": "Вісь {n}",
-  "ui.space_mouse_view_zoom": "Масштаб",
   "ui.spacing": "Крок",
   "ui.spacing_2": "Крок 2",
   "ui.sphere": "Куля",

assets/locales/vi.json

@@ -72,6 +72,7 @@
   "Choose…": "Chọn…",
   "Circular": "Tròn",
   "Circumference": "Chu vi",
+  "Clockwise": "Theo chiều kim đồng hồ",
   "Close draft": "Đóng bản nháp",
   "Collisions": "Va chạm",
   "Colour": "Màu sắc",
@@ -322,6 +323,7 @@
   "Search commands": "Tìm kiếm lệnh",
   "Search this library": "Tìm trong thư viện này",
   "Section": "Mặt cắt",
+  "Section position": "Vị trí mặt cắt",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "Chọn đối tượng khác: giữ nút chuột trái đứng yên trên mô hình (hoặc nhấp chuột phải › Chọn đối tượng khác…) để liệt kê mọi đối tượng dưới con trỏ; nhấp lại vào cùng vị trí đó để chọn đối tượng kế tiếp. Nhấp đúp chuột giữa để về Góc nhìn chuẩn (Tùy chọn cài đặt › Điều hướng).",
   "Select bodies (a face picks its body)": "Chọn thân khối (chọn một mặt sẽ chọn cả thân khối)",
   "Select bodies or faces instead": "Chọn thân khối hoặc bề mặt thay thế",
@@ -345,9 +347,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft đã đóng trước khi các thiết kế này được lưu. Bạn có thể mở bản tự động lưu gần nhất của chúng.",
   "Specialise": "Chuyên biệt hóa",
   "Speed": "Tốc độ",
+  "Square": "Hình vuông",
   "Stand it up": "Dựng đứng đối tượng",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Dựng đứng đối tượng: xoay 90° quanh trục X, dưới dạng một tính năng Di chuyển có thể hoàn tác.",
   "Stand this part up?": "Dựng đứng chi tiết này lên?",
+  "Start angle": "Góc bắt đầu",
   "Start bulge": "Độ phình đầu",
   "Start continuity": "Độ liên tục đầu",
   "Step": "Bước",
@@ -412,6 +416,7 @@
   "angle, height": "góc, chiều cao",
   "appearance.dielectric_ior": "Chỉ số khúc xạ điện môi (IOR)",
   "appearance.metallic": "Độ kim loại",
+  "appearance.only_available": "Chỉ các kiểu bề ngoài khả dụng",
   "appearance.pbr_help": "Xem bề mặt này trong chế độ Kết xuất hoặc ảnh PNG sản phẩm. Không có khúc xạ hay truyền sáng.",
   "appearance.pbr_opaque": "PBR không trong suốt",
   "appearance.roughness": "Độ nhám bề mặt",
@@ -530,6 +535,10 @@
   "cmd.file_insert_step": "Chèn tệp STEP",
   "cmd.file_save_mesh": "Lưu dưới dạng lưới đa giác",
   "cmd.file_slicers": "Phần mềm cắt lớp đã cài đặt",
+  "cmd.frame_member": "Thanh khung",
+  "cmd.frame_profile_insert": "Chèn tiết diện",
+  "cmd.frame_profile_list": "Thư viện tiết diện",
+  "cmd.frame_profile_properties": "Thuộc tính tiết diện",
   "cmd.inspect_accessibility": "Phân tích khả năng gia công tiếp cận",
   "cmd.inspect_center_of_mass": "Trọng tâm",
   "cmd.inspect_clearance": "Khoảng cách an toàn",
@@ -569,6 +578,7 @@
   "cmd.material_create": "Tạo vật liệu vật lý mới",
   "cmd.material_delete": "Xóa vật liệu vật lý",
   "cmd.material_edit": "Chỉnh sửa vật liệu vật lý",
+  "cmd.material_inspect": "Kiểm tra vật liệu vật lý",
   "cmd.material_list": "Danh sách vật liệu",
   "cmd.material_properties_directional": "Mô đun đàn hồi theo hướng",
   "cmd.material_properties_validate": "Xác thực dữ liệu thuộc tính vật liệu",
@@ -1121,7 +1131,106 @@
   "trace.stopped_by_contact": "Kết thúc tại mẫu {sample}: {a} sẽ xuyên qua {b}",
   "trace.stopped_by_loop": "Kết thúc tại mẫu {sample}: vòng lặp qua {joint} không thể khép kín thêm được nữa",
   "ui.1_degree_of_freedom": "1 bậc tự do",
+  "ui.3d_mouse_axes_reassigned": "Các trục được gán lại trong Tùy chọn, và điều đó vẫn áp dụng cùng với hiệu chuẩn này.",
+  "ui.3d_mouse_button": "Nút {number}",
+  "ui.3d_mouse_button_nothing": "Không có",
+  "ui.3d_mouse_button_settings": "Cài đặt chuột 3D",
+  "ui.3d_mouse_buttons": "Nút",
+  "ui.3d_mouse_buttons_hint": "Nhấn một nút trên chuột 3D để tìm nó ở đây, rồi chọn chức năng.",
+  "ui.3d_mouse_buttons_no_device": "Kết nối chuột 3D để chọn chức năng cho các nút của nó.",
+  "ui.3d_mouse_buttons_reset": "Khôi phục nút mặc định",
+  "ui.3d_mouse_calibrate": "Hiệu chuẩn…",
+  "ui.3d_mouse_calibrate_tip": "Di chuyển núm điều khiển theo yêu cầu của cửa sổ để SolidCraft biết mỗi trục của chuột 3D này đi theo hướng nào và xa bao nhiêu. Được lưu cho chuột 3D này.",
+  "ui.3d_mouse_calibrate_title": "Hiệu chuẩn chuột 3D",
+  "ui.3d_mouse_calibrate_wait": "Hãy di chuyển chuột 3D một lần để SolidCraft nhận ra nó.",
+  "ui.3d_mouse_calibrated": "Đã hiệu chuẩn",
+  "ui.3d_mouse_calibration": "Hiệu chuẩn chuột 3D",
+  "ui.3d_mouse_calibration_done": "Xong. Hãy lưu để dùng mỗi khi chuột 3D này được kết nối.",
+  "ui.3d_mouse_calibration_no_response": "Một trục hầu như không di chuyển nên không thể hiệu chuẩn. Hãy bắt đầu lại và di chuyển núm điều khiển xa hơn mỗi lần.",
+  "ui.3d_mouse_circles_help": "Các vòng tròn cho thấy thiết bị gửi gì sau khi hiệu chuẩn. Mô hình thử cho thấy khung nhìn làm gì với nó, sau đảo chiều, tốc độ và gán trục.",
+  "ui.3d_mouse_dead_zone": "Vùng chết",
+  "ui.3d_mouse_dead_zone_tip": "Núm điều khiển phải di chuyển bao xa thì khung nhìn mới di chuyển, tính theo tỷ lệ hành trình tối đa. Hãy tăng giá trị này nếu khung nhìn bị trôi khi núm đang đứng yên.",
+  "ui.3d_mouse_denied": "SolidCraft thấy một chuột 3D nhưng không được phép đọc nó. Xem ghi chú thiết lập chuột 3D để biết quy tắc udev.",
+  "ui.3d_mouse_denied_short": "Đã thấy, nhưng không đọc được",
+  "ui.3d_mouse_driven_by": "Chuyển động đã hiệu chuẩn nào của thiết bị điều khiển trục này. Chọn chuyển động mà trục khác đang dùng sẽ hoán đổi hai trục.",
+  "ui.3d_mouse_driven_by_label": "điều khiển bởi",
+  "ui.3d_mouse_driver": "Trình điều khiển chuột 3D",
+  "ui.3d_mouse_driver_auto": "Tự động",
+  "ui.3d_mouse_driver_direct": "Trực tiếp (hidraw)",
+  "ui.3d_mouse_driver_fallback": "Tạm thời đọc qua spacenavd: không mở được chính thiết bị.",
+  "ui.3d_mouse_driver_only_direct": "Đang đọc thiết bị trực tiếp; spacenavd không chạy",
+  "ui.3d_mouse_driver_only_spacenavd": "Đang đọc qua spacenavd, cách duy nhất có sẵn",
+  "ui.3d_mouse_forget": "Xóa hiệu chuẩn",
+  "ui.3d_mouse_ghost_left_viewport": "Khung nhìn bên trái",
+  "ui.3d_mouse_ghost_left_window": "Cửa sổ bên trái",
+  "ui.3d_mouse_ghost_position": "Vị trí",
+  "ui.3d_mouse_ghost_right_viewport": "Khung nhìn bên phải",
+  "ui.3d_mouse_hint": "Di chuyển và xoay khung nhìn đồng thời; môi trường phác thảo chỉ sử dụng dời khung nhìn và thu phóng.",
+  "ui.3d_mouse_kind_cap": "Trở về giữa",
+  "ui.3d_mouse_kind_question": "Đây là loại chuột 3D nào?",
+  "ui.3d_mouse_kind_trackball": "Bi xoay",
+  "ui.3d_mouse_looks_like_cap": "Giá trị giữ nguyên khi bạn giữ, giống thiết bị kiểu “Trở về giữa”.",
+  "ui.3d_mouse_looks_like_trackball": "Giá trị trở về ngay khi bạn ngừng di chuyển, giống bi xoay.",
+  "ui.3d_mouse_motion_rotation_x": "Xoay X",
+  "ui.3d_mouse_motion_rotation_y": "Xoay Y",
+  "ui.3d_mouse_motion_rotation_z": "Xoay Z",
+  "ui.3d_mouse_motion_translation_x": "Tịnh tiến X",
+  "ui.3d_mouse_motion_translation_y": "Tịnh tiến Y",
+  "ui.3d_mouse_motion_translation_z": "Tịnh tiến Z",
+  "ui.3d_mouse_navigate": "Điều hướng bằng chuột 3D",
+  "ui.3d_mouse_none": "Không tìm thấy chuột 3D",
+  "ui.3d_mouse_not_calibrated": "Chưa hiệu chuẩn",
+  "ui.3d_mouse_offer": "Hiệu chuẩn chuột 3D sẽ sửa các trục bị hoán đổi hoặc đảo ngược và chỉnh tốc độ cũng như cảm giác.",
+  "ui.3d_mouse_offer_never": "Không hiện lại",
+  "ui.3d_mouse_offer_swap": "Chuyển sang Hidraw (điều khiển trực tiếp)",
+  "ui.3d_mouse_reading": "Giá trị đọc",
+  "ui.3d_mouse_reset_axes": "Đặt lại phép gán trục",
+  "ui.3d_mouse_reset_view": "Đặt lại khung nhìn",
+  "ui.3d_mouse_restore": "Khôi phục mặc định chuột 3D",
+  "ui.3d_mouse_restore_ask": "Đặt cài đặt chuột 3D về mặc định? Hiệu chuẩn và gán nút được giữ nguyên.",
+  "ui.3d_mouse_section": "Chuột 3D",
+  "ui.3d_mouse_show_in_view": "Hiện chuột 3D trong khung nhìn 3D",
+  "ui.3d_mouse_show_in_view_tip": "Hình chuột 3D của bạn ở góc dưới bên trái, chuyển động theo bạn.",
+  "ui.3d_mouse_skip": "Thiết bị của tôi không làm được điều này",
+  "ui.3d_mouse_skip_tip": "Bỏ qua chuyển động này theo cả hai chiều; việc hiệu chuẩn sẽ không dùng nó.",
   "ui.3d_mouse_speed": "Tốc độ chuột 3D",
+  "ui.3d_mouse_step_lift": "Nâng núm điều khiển lên, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_press": "Nhấn núm điều khiển xuống, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_pull": "Kéo núm điều khiển về phía bạn, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_push": "Đẩy núm điều khiển ra xa bạn, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_rest": "Bỏ tay khỏi núm điều khiển và để yên.",
+  "ui.3d_mouse_step_rest_trackball": "Bỏ tay khỏi viên bi và để yên.",
+  "ui.3d_mouse_step_ring_clockwise": "Xoay vòng cuộn theo chiều kim đồng hồ vài nấc.",
+  "ui.3d_mouse_step_ring_counterclockwise": "Xoay vòng cuộn ngược chiều kim đồng hồ vài nấc.",
+  "ui.3d_mouse_step_roll_away": "Lăn viên bi ra xa bạn vài lần, rồi để nó dừng lại.",
+  "ui.3d_mouse_step_roll_left": "Lăn viên bi sang trái vài lần, rồi để nó dừng lại.",
+  "ui.3d_mouse_step_roll_right": "Lăn viên bi sang phải vài lần, rồi để nó dừng lại.",
+  "ui.3d_mouse_step_roll_toward": "Lăn viên bi về phía bạn vài lần, rồi để nó dừng lại.",
+  "ui.3d_mouse_step_slide_left": "Trượt núm điều khiển sang trái, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_slide_right": "Trượt núm điều khiển sang phải, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_spin_clockwise": "Xoay viên bi theo chiều kim đồng hồ vài lần, rồi để nó dừng lại.",
+  "ui.3d_mouse_step_spin_counterclockwise": "Xoay viên bi ngược chiều kim đồng hồ vài lần, rồi để nó dừng lại.",
+  "ui.3d_mouse_step_tilt_away": "Nghiêng phần trên núm điều khiển ra xa bạn (cạnh gần bạn nhất nâng lên), giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_tilt_left": "Nghiêng núm điều khiển sang trái (cạnh trái hạ xuống), giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_tilt_right": "Nghiêng núm điều khiển sang phải (cạnh phải hạ xuống), giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_tilt_toward": "Nghiêng phần trên núm điều khiển về phía bạn (cạnh gần bạn nhất hạ xuống), giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_touch": "Đặt tay lên núm điều khiển nhưng không đẩy.",
+  "ui.3d_mouse_step_twist_clockwise": "Xoay núm điều khiển theo chiều kim đồng hồ, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_step_twist_counterclockwise": "Xoay núm điều khiển ngược chiều kim đồng hồ, giữ nguyên, rồi thả ra.",
+  "ui.3d_mouse_switch_cap": "Hiệu chuẩn theo kiểu trở về giữa",
+  "ui.3d_mouse_switch_trackball": "Hiệu chuẩn như bi xoay",
+  "ui.3d_mouse_view_axis": "Trục khung nhìn",
+  "ui.3d_mouse_view_off": "Tắt",
+  "ui.3d_mouse_view_off_tip": "Hồ sơ của trình điều khiển chuột 3D tắt trục này, nên chuyển động của nó không làm khung nhìn di chuyển. Chọn chuyển động của trục khác ở đây sẽ hoán đổi hai trục, và chuyển động đó không còn di chuyển khung nhìn.",
+  "ui.3d_mouse_view_orbit_sideways": "Xoay quanh trái / phải",
+  "ui.3d_mouse_view_orbit_up_down": "Xoay quanh lên / xuống",
+  "ui.3d_mouse_view_pan_sideways": "Kéo trái / phải",
+  "ui.3d_mouse_view_pan_up_down": "Kéo lên / xuống",
+  "ui.3d_mouse_view_roll": "Lăn",
+  "ui.3d_mouse_view_unmapped": "Trục {n}",
+  "ui.3d_mouse_view_zoom": "Thu phóng",
+  "ui.3d_mouse_waiting": "Đang chờ chuyển động",
+  "ui.3d_mouse_wiggle": "Nếu bạn đã cắm một chiếc, hãy lắc nhẹ nó.",
   "ui.3d_sketch": "3D Phác thảo",
   "ui.activate": "Kích hoạt",
   "ui.active_component": "Cụm chi tiết đang kích hoạt",
@@ -1351,6 +1460,7 @@
   "ui.blocked": "Bị chặn",
   "ui.bodies": "Các thân khối",
   "ui.bodies_all_if_none": "Thân khối (tất cả nếu không chọn)",
+  "ui.bottom": "Dưới",
   "ui.box": "Khối hộp",
   "ui.break": "Ngắt",
   "ui.browser_bodies_one": "{count} thân khối",
@@ -1503,6 +1613,7 @@
   "ui.grid_follows_view_hint": "Các góc nhìn cạnh hiển thị lưới trên mặt phẳng thẳng đứng hướng về phía camera thay vì trên mặt sàn",
   "ui.ground_shadow": "Bóng đổ mặt sàn",
   "ui.groupSelected": "Gộp nhóm vùng chọn",
+  "ui.hatch": "Gạch mặt cắt",
   "ui.heading_add_ins": "TIỆN ÍCH MỞ RỘNG",
   "ui.heading_assemble": "LẮP RÁP",
   "ui.heading_box": "KHỐI HỘP",
@@ -1793,34 +1904,6 @@
   "ui.smooth_wheel_zoom": "Thu phóng mượt bằng con lăn",
   "ui.smooth_wheel_zoom_tip": "Tắt tùy chọn này để áp dụng từng sự kiện con lăn ngay lập tức mà không có hiệu ứng làm mượt chuyển động",
   "ui.snap": "Bắt điểm",
-  "ui.space_mouse_calibrate": "Hiệu chuẩn…",
-  "ui.space_mouse_calibrate_tip": "Di chuyển núm điều khiển theo yêu cầu của cửa sổ để SolidCraft biết mỗi trục của chuột 3D này đi theo hướng nào và xa bao nhiêu. Được lưu cho chuột 3D này.",
-  "ui.space_mouse_calibrate_title": "Hiệu chuẩn chuột 3D",
-  "ui.space_mouse_calibrated": "Đã hiệu chuẩn",
-  "ui.space_mouse_calibration": "Hiệu chuẩn chuột 3D",
-  "ui.space_mouse_calibration_done": "Xong. Hãy lưu để dùng mỗi khi chuột 3D này được kết nối.",
-  "ui.space_mouse_calibration_no_response": "Một trục hầu như không di chuyển nên không thể hiệu chuẩn. Hãy bắt đầu lại và di chuyển núm điều khiển xa hơn mỗi lần.",
-  "ui.space_mouse_dead_zone": "Vùng chết",
-  "ui.space_mouse_dead_zone_tip": "Núm điều khiển phải di chuyển bao xa thì góc nhìn mới di chuyển, tính theo tỷ lệ hành trình tối đa. Hãy tăng giá trị này nếu góc nhìn bị trôi khi núm đang đứng yên.",
-  "ui.space_mouse_forget": "Xóa hiệu chuẩn",
-  "ui.space_mouse_hint": "Di chuyển và xoay khung nhìn đồng thời; môi trường phác thảo chỉ sử dụng dời góc nhìn và thu phóng.",
-  "ui.space_mouse_navigate": "Điều hướng bằng SpaceNavigator / SpaceMouse",
-  "ui.space_mouse_none": "Không tìm thấy chuột 3D",
-  "ui.space_mouse_not_calibrated": "Chưa hiệu chuẩn",
-  "ui.space_mouse_reading": "Giá trị đọc",
-  "ui.space_mouse_step_lift": "Nâng núm điều khiển lên, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_press": "Nhấn núm điều khiển xuống, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_pull": "Kéo núm điều khiển về phía bạn, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_push": "Đẩy núm điều khiển ra xa bạn, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_rest": "Bỏ tay khỏi núm điều khiển và để yên.",
-  "ui.space_mouse_step_slide_left": "Trượt núm điều khiển sang trái, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_slide_right": "Trượt núm điều khiển sang phải, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_tilt_back": "Nghiêng núm điều khiển về sau (cạnh trước nâng lên), giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_tilt_forward": "Nghiêng núm điều khiển về trước (cạnh trước hạ xuống), giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_tilt_left": "Nghiêng núm điều khiển sang trái (cạnh trái hạ xuống), giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_tilt_right": "Nghiêng núm điều khiển sang phải (cạnh phải hạ xuống), giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_twist_clockwise": "Xoay núm điều khiển theo chiều kim đồng hồ, giữ nguyên, rồi thả ra.",
-  "ui.space_mouse_step_twist_counterclockwise": "Xoay núm điều khiển ngược chiều kim đồng hồ, giữ nguyên, rồi thả ra.",
   "ui.spacing": "Khoảng cách",
   "ui.spacing_2": "Khoảng cách 2",
   "ui.sphere": "Hình cầu",

assets/locales/zh-TW.json

@@ -72,6 +72,7 @@
   "Choose…": "選擇…",
   "Circular": "環形",
   "Circumference": "周長",
+  "Clockwise": "順時針",
   "Close draft": "關閉草稿",
   "Collisions": "碰撞",
   "Colour": "顏色",
@@ -321,6 +322,7 @@
   "Search commands": "搜尋命令",
   "Search this library": "搜尋此零件庫",
   "Section": "剖面",
+  "Section position": "截面位置",
   "Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "「選擇其他」：在模型上按住左鍵（或右鍵點擊 › 選擇其他…）列出游標下的所有物件；在同一位置再次點擊可選擇該處的下一個物件。雙擊中鍵轉到主檢視（偏好設定 › 導覽）。",
   "Select bodies (a face picks its body)": "選擇實體（點擊面即選擇其所屬實體）",
   "Select bodies or faces instead": "改為選擇實體或面",
@@ -344,9 +346,11 @@
   "SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft 在這些設計儲存前已關閉。可以開啟它們的上次自動儲存。",
   "Specialise": "專用操作",
   "Speed": "速度",
+  "Square": "正方形",
   "Stand it up": "將其立起",
   "Stand it up: a quarter turn about X, as one Move feature you can undo.": "將其立起：繞 X 軸旋轉四分之一週，作為一個可復原的移動特徵。",
   "Stand this part up?": "立起此零件？",
+  "Start angle": "起始角度",
   "Start bulge": "起始鼓度",
   "Start continuity": "起始連續性",
   "Step": "步驟",
@@ -411,6 +415,7 @@
   "angle, height": "角度、高度",
   "appearance.dielectric_ior": "介電折射率",
   "appearance.metallic": "金屬度",
+  "appearance.only_available": "僅顯示可用外觀",
   "appearance.pbr_help": "在彩現工作區或產品 PNG 中檢視此表面。不支援折射或透射。",
   "appearance.pbr_opaque": "不透明 PBR",
   "appearance.roughness": "粗糙度",
@@ -529,6 +534,10 @@
   "cmd.file_insert_step": "插入 STEP",
   "cmd.file_save_mesh": "另存為網格",
   "cmd.file_slicers": "已安裝的切片軟體",
+  "cmd.frame_member": "框架構件",
+  "cmd.frame_profile_insert": "插入型材",
+  "cmd.frame_profile_list": "型材庫",
+  "cmd.frame_profile_properties": "型材屬性",
   "cmd.inspect_accessibility": "可達性分析",
   "cmd.inspect_center_of_mass": "質心",
   "cmd.inspect_clearance": "間隙",
@@ -568,6 +577,7 @@
   "cmd.material_create": "新建物理材質",
   "cmd.material_delete": "刪除物理材質",
   "cmd.material_edit": "編輯物理材質",
+  "cmd.material_inspect": "檢查物理材質",
   "cmd.material_list": "列出材質",
   "cmd.material_properties_directional": "方向彈性模量",
   "cmd.material_properties_validate": "驗證物理材質資料",
@@ -1120,7 +1130,50 @@
   "trace.stopped_by_contact": "在取樣 {sample} 處結束：{a} 會穿過 {b}",
   "trace.stopped_by_loop": "在取樣 {sample} 處結束：經過 {joint} 的環路無法再閉合",
   "ui.1_degree_of_freedom": "1 個自由度",
+  "ui.3d_mouse_calibrate": "校準…",
+  "ui.3d_mouse_calibrate_tip": "按視窗提示移動搖桿帽，SolidCraft 會記住這個 3D 滑鼠每個軸的方向和行程。校準結果按此 3D 滑鼠儲存。",
+  "ui.3d_mouse_calibrate_title": "校準 3D 滑鼠",
+  "ui.3d_mouse_calibrate_wait": "請移動一次 3D 滑鼠，讓 SolidCraft 能夠辨識它。",
+  "ui.3d_mouse_calibrated": "已校準",
+  "ui.3d_mouse_calibration": "3D 滑鼠校準",
+  "ui.3d_mouse_calibration_done": "完成。儲存後，每次連線此 3D 滑鼠都會使用它。",
+  "ui.3d_mouse_calibration_no_response": "有一個軸幾乎沒有移動，因此無法校準。請重新開始，並且每次把搖桿帽移得更遠。",
+  "ui.3d_mouse_circles_help": "圓圈顯示裝置在校準後送出的內容。測試模型顯示檢視在反向、速度與軸指定之後如何處理它。",
+  "ui.3d_mouse_dead_zone": "死區",
+  "ui.3d_mouse_dead_zone_tip": "檢視開始移動前搖桿帽需要移動的距離，以其全行程的比例表示。如果搖桿帽靜止時檢視仍在漂移，請調大。",
+  "ui.3d_mouse_denied": "SolidCraft 看得到 3D 滑鼠，但沒有權限讀取。udev 規則請見 3D 滑鼠的設定說明。",
+  "ui.3d_mouse_denied_short": "已找到，但無法讀取",
+  "ui.3d_mouse_driver_fallback": "目前改透過 spacenavd 讀取：無法開啟裝置本身。",
+  "ui.3d_mouse_forget": "清除校準",
+  "ui.3d_mouse_ghost_left_viewport": "視埠左側",
+  "ui.3d_mouse_ghost_left_window": "視窗左側",
+  "ui.3d_mouse_ghost_position": "位置",
+  "ui.3d_mouse_ghost_right_viewport": "視埠右側",
+  "ui.3d_mouse_hint": "同時移動和旋轉檢視；草圖中僅支援平移和縮放。",
+  "ui.3d_mouse_navigate": "使用 3D 滑鼠導覽",
+  "ui.3d_mouse_none": "未找到 3D 滑鼠",
+  "ui.3d_mouse_not_calibrated": "未校準",
+  "ui.3d_mouse_offer": "校準 3D 滑鼠可以修正互換或反向的軸，並調整它的速度和手感。",
+  "ui.3d_mouse_offer_never": "不再顯示",
+  "ui.3d_mouse_offer_swap": "切換到 Hidraw（直接驅動）",
+  "ui.3d_mouse_reading": "讀值",
+  "ui.3d_mouse_reset_view": "重設檢視",
+  "ui.3d_mouse_restore": "還原 3D 滑鼠預設值",
+  "ui.3d_mouse_restore_ask": "要將 3D 滑鼠設定還原為預設值嗎？校準和按鈕對應會保留。",
   "ui.3d_mouse_speed": "3D 滑鼠速度",
+  "ui.3d_mouse_step_lift": "向上提起搖桿帽，保持住，然後鬆開。",
+  "ui.3d_mouse_step_press": "向下按壓搖桿帽，保持住，然後鬆開。",
+  "ui.3d_mouse_step_pull": "把搖桿帽拉向自己，保持住，然後鬆開。",
+  "ui.3d_mouse_step_push": "把搖桿帽推離自己，保持住，然後鬆開。",
+  "ui.3d_mouse_step_rest": "請把手從搖桿帽上移開，讓它保持靜止。",
+  "ui.3d_mouse_step_slide_left": "向左推動搖桿帽，保持住，然後鬆開。",
+  "ui.3d_mouse_step_slide_right": "向右推動搖桿帽，保持住，然後鬆開。",
+  "ui.3d_mouse_step_tilt_left": "向左傾斜搖桿帽（左緣向下），保持住，然後鬆開。",
+  "ui.3d_mouse_step_tilt_right": "向右傾斜搖桿帽（右緣向下），保持住，然後鬆開。",
+  "ui.3d_mouse_step_twist_clockwise": "順時針扭轉搖桿帽，保持住，然後鬆開。",
+  "ui.3d_mouse_step_twist_counterclockwise": "逆時針扭轉搖桿帽，保持住，然後鬆開。",
+  "ui.3d_mouse_waiting": "等待移動",
+  "ui.3d_mouse_wiggle": "如果已插上，請輕輕晃動一下。",
   "ui.3d_sketch": "3D 草圖",
   "ui.activate": "啟用",
   "ui.active_component": "作用中元件",
@@ -1502,6 +1555,7 @@
   "ui.grid_follows_view_hint": "在側檢視中，將網格顯示在朝向該檢視的豎直平面上，而不是地面上",
   "ui.ground_shadow": "地面陰影",
   "ui.groupSelected": "群組所選",
+  "ui.hatch": "剖面線",
   "ui.heading_add_ins": "增益集",
   "ui.heading_assemble": "組裝",
   "ui.heading_box": "長方體",
@@ -1792,34 +1846,6 @@
   "ui.smooth_wheel_zoom": "平滑滾輪縮放",
   "ui.smooth_wheel_zoom_tip": "關閉後每個滾輪事件立即生效，不做平滑延遲",
   "ui.snap": "鎖點",
-  "ui.space_mouse_calibrate": "校準…",
-  "ui.space_mouse_calibrate_tip": "按視窗提示移動搖桿帽，SolidCraft 會記住這個 3D 滑鼠每個軸的方向和行程。校準結果按此 3D 滑鼠儲存。",
-  "ui.space_mouse_calibrate_title": "校準 3D 滑鼠",
-  "ui.space_mouse_calibrated": "已校準",
-  "ui.space_mouse_calibration": "3D 滑鼠校準",
-  "ui.space_mouse_calibration_done": "完成。儲存後，每次連線此 3D 滑鼠都會使用它。",
-  "ui.space_mouse_calibration_no_response": "有一個軸幾乎沒有移動，因此無法校準。請重新開始，並且每次把搖桿帽移得更遠。",
-  "ui.space_mouse_dead_zone": "死區",
-  "ui.space_mouse_dead_zone_tip": "檢視開始移動前搖桿帽需要移動的距離，以其全行程的比例表示。如果搖桿帽靜止時檢視仍在漂移，請調大。",
-  "ui.space_mouse_forget": "清除校準",
-  "ui.space_mouse_hint": "同時移動和旋轉檢視；草圖中僅支援平移和縮放。",
-  "ui.space_mouse_navigate": "使用 SpaceNavigator / SpaceMouse 導覽",
-  "ui.space_mouse_none": "未找到 3D 滑鼠",
-  "ui.space_mouse_not_calibrated": "未校準",
-  "ui.space_mouse_reading": "讀值",
-  "ui.space_mouse_step_lift": "向上提起搖桿帽，保持住，然後鬆開。",
-  "ui.space_mouse_step_press": "向下按壓搖桿帽，保持住，然後鬆開。",
-  "ui.space_mouse_step_pull": "把搖桿帽拉向自己，保持住，然後鬆開。",
-  "ui.space_mouse_step_push": "把搖桿帽推離自己，保持住，然後鬆開。",
-  "ui.space_mouse_step_rest": "請把手從搖桿帽上移開，讓它保持靜止。",
-  "ui.space_mouse_step_slide_left": "向左推動搖桿帽，保持住，然後鬆開。",
-  "ui.space_mouse_step_slide_right": "向右推動搖桿帽，保持住，然後鬆開。",
-  "ui.space_mouse_step_tilt_back": "向後傾斜搖桿帽（前緣向上），保持住，然後鬆開。",
-  "ui.space_mouse_step_tilt_forward": "向前傾斜搖桿帽（前緣向下），保持住，然後鬆開。",
-  "ui.space_mouse_step_tilt_left": "向左傾斜搖桿帽（左緣向下），保持住，然後鬆開。",
-  "ui.space_mouse_step_tilt_right": "向右傾斜搖桿帽（右緣向下），保持住，然後鬆開。",
-  "ui.space_mouse_step_twist_clockwise": "順時針扭轉搖桿帽，保持住，然後鬆開。",
-  "ui.space_mouse_step_twist_counterclockwise": "逆時針扭轉搖桿帽，保持住，然後鬆開。",
   "ui.spacing": "間距",
   "ui.spacing_2": "間距 2",
   "ui.sphere": "球體",

assets/materials/library.rs

@@ -1,9 +1,14 @@
 //! Built-in physical materials: densities in g/cm³ and sRGB colours.
+
+/// The default material's name: what a body without a usable material of its own is made of.
+/// Assigning it clears a body's assignment.
+pub const DEFAULT_MATERIAL: &str = "Default";
+/// Density of the default material (g/cm³).
 pub const DEFAULT_DENSITY: f64 = 1.29;
 
 /// Physical materials: name and density (g/cm³).
 pub const MATERIALS: [(&str, f64); 14] = [
-    ("Default", DEFAULT_DENSITY),
+    (DEFAULT_MATERIAL, DEFAULT_DENSITY),
     ("Steel", 7.85),
     ("Stainless Steel", 8.0),
     ("Aluminum", 2.70),

assets/models/make_test_boat.py

@@ -0,0 +1,79 @@
+#!/usr/bin/env python3
+"""Packs the boat for the 3D mouse test model in Preferences into assets/models/test_boat.bin, from a
+binary STL of the low-poly boat (about 850 triangles). Needs numpy.
+
+    python3 assets/models/make_test_boat.py SOURCE.stl assets/models/test_boat.bin
+
+No reduction happens here: the vertices are welded, and each welded vertex is split by the angle
+between the faces that meet there (more than 40 degrees apart is a crease), so smooth surfaces share
+a vertex normal and edges stay sharp. The model is centred and scaled into a unit box, then
+quantised. File layout, little-endian: u32 vertex count, u32 triangle count, f32 centre (x, y, z),
+f32 half size of the longest side; then per vertex its position as i16 x 3 (32767 is the half size)
+and its normal as i8 x 3 (127 is a unit); then per triangle three u16 vertex indices. The model
+sits with z up.
+"""
+import struct
+import sys
+
+import numpy as np
+
+CREASE_DEGREES = 40.0
+
+
+def main() -> None:
+    source, target = sys.argv[1], sys.argv[2]
+    data = open(source, "rb").read()
+    count = struct.unpack_from("<I", data, 80)[0]
+    record = np.dtype([("n", "<f4", 3), ("v", "<f4", (3, 3)), ("attr", "<u2")])
+    tris = np.frombuffer(data, dtype=record, count=count, offset=84)["v"].astype(np.float64)
+    points, inverse = np.unique(np.round(tris.reshape(-1, 3), 3), axis=0, return_inverse=True)
+    faces = inverse.reshape(-1, 3)
+    keep = (faces[:, 0] != faces[:, 1]) & (faces[:, 1] != faces[:, 2]) & (faces[:, 0] != faces[:, 2])
+    faces = faces[keep]
+    a, b, c = points[faces[:, 0]], points[faces[:, 1]], points[faces[:, 2]]
+    cross = np.cross(b - a, c - a)
+    area = np.linalg.norm(cross, axis=1)
+    ok = area > 1e-9
+    faces, cross, area = faces[ok], cross[ok], area[ok]
+    face_normal = cross / area[:, None]
+    # Split each welded vertex into one vertex per group of faces that agree (within the crease angle).
+    cos_limit = np.cos(np.radians(CREASE_DEGREES))
+    corners = {}
+    for f, tri in enumerate(faces):
+        for k in range(3):
+            corners.setdefault(int(tri[k]), []).append((f, k))
+    out_points, out_normals, index = [], [], np.zeros(faces.shape, dtype=np.int64)
+    for v, incident in corners.items():
+        groups = []  # each: [summed normal, [(face, corner)]]
+        for f, k in incident:
+            n = face_normal[f]
+            for g in groups:
+                mean = g[0] / np.linalg.norm(g[0])
+                if mean @ n > cos_limit:
+                    g[0] = g[0] + n * area[f]
+                    g[1].append((f, k))
+                    break
+            else:
+                groups.append([n * area[f], [(f, k)]])
+        for total, members in groups:
+            length = np.linalg.norm(total)
+            out_normals.append(total / length if length > 0 else np.array([0.0, 0.0, 1.0]))
+            out_points.append(points[v])
+            for f, k in members:
+                index[f, k] = len(out_points) - 1
+    out_points, out_normals = np.array(out_points), np.array(out_normals)
+    low, high = out_points.min(axis=0), out_points.max(axis=0)
+    centre, half = (low + high) / 2.0, float((high - low).max() / 2.0)
+    positions = np.clip(np.round((out_points - centre) / half * 32767.0), -32767, 32767).astype("<i2")
+    normals = np.clip(np.round(out_normals * 127.0), -127, 127).astype("i1")
+    assert len(out_points) <= 65535
+    with open(target, "wb") as out:
+        out.write(struct.pack("<II3ff", len(out_points), len(index), *centre.tolist(), half))
+        for p, n in zip(positions, normals):
+            out.write(p.tobytes() + n.tobytes())
+        out.write(index.astype("<u2").tobytes())
+    print(f"{len(out_points)} vertices, {len(index)} triangles, centre {centre}, half size {half}")
+
+
+if __name__ == "__main__":
+    main()

assets/render/.gitattributes

@@ -0,0 +1,6 @@
+# Recipe and generator receipts hash canonical bytes on every platform.
+*.json text eol=lf
+*.py text eol=lf
+*.md text eol=lf
+*.png binary
+*.hdr binary

assets/render/catalog/README.md

@@ -0,0 +1,14 @@
+# Runtime render catalog exports
+
+These JSON files are necessary runtime exports of the editable authoring catalogs in
+`docs/render-materials/`. Do not edit both copies. `python -B tools/render-library/generate.py`
+copies the original bytes and updates the Rust lookup; `--check` verifies exact equality.
+The application includes these asset exports, never files from the documentation tree.
+
+The 192 texture maps and 24 HDR files are separate from this metadata. They are included
+only with the engine's `bundled-render-library` feature. Desktop builds enable it by
+default. Standalone CLI and web builds do not; use their same-named feature to opt in.
+Discovery and uniform appearances remain available without the image pack. Requests
+requiring missing bytes fail explicitly before document mutation; no network is used.
+GPU/UI test targets opt in deliberately. Exercise the engine's no-pack negative tests
+separately from its feature-enabled resource tests.

assets/render/catalog/quality-presets.json

@@ -0,0 +1,759 @@
+{
+  "metadata": {
+    "schema_version": "0.2.0",
+    "language": "en",
+    "status": "specified_unbound",
+    "provenance_id": "ORIGINAL-2026-10-CATALOG"
+  },
+  "items": [
+    {
+      "id": "Q-001",
+      "name": "Interactive Draft",
+      "status": "specified_unbound",
+      "goal": "preview",
+      "resolution": {
+        "width": 960,
+        "height": 540
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 8,
+        "maximum_samples": 64,
+        "relative_error_target": 0.12,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 4,
+        "maximum_transmission_depth": 2,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_buffer",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-002",
+      "name": "Balanced Product",
+      "status": "specified_unbound",
+      "goal": "presentation",
+      "resolution": {
+        "width": 1600,
+        "height": 900
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 32,
+        "maximum_samples": 512,
+        "relative_error_target": 0.035,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 8,
+        "maximum_transmission_depth": 6,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": true,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_buffer",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-065",
+        "CAP-073",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-003",
+      "name": "Product Portfolio",
+      "status": "specified_unbound",
+      "goal": "presentation",
+      "resolution": {
+        "width": 2560,
+        "height": 1440
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 64,
+        "maximum_samples": 2048,
+        "relative_error_target": 0.015,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 12,
+        "maximum_transmission_depth": 10,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": true,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_buffer",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-065",
+        "CAP-073",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-004",
+      "name": "Glass and Layers",
+      "status": "specified_unbound",
+      "goal": "optics",
+      "resolution": {
+        "width": 2560,
+        "height": 1440
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 128,
+        "maximum_samples": 4096,
+        "relative_error_target": 0.01,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 20,
+        "maximum_transmission_depth": 16,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": true,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-025",
+        "CAP-026",
+        "CAP-027",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-065",
+        "CAP-073",
+        "CAP-074",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-005",
+      "name": "LED Optical Study",
+      "status": "specified_unbound",
+      "goal": "optics",
+      "resolution": {
+        "width": 2560,
+        "height": 1440
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 128,
+        "maximum_samples": 4096,
+        "relative_error_target": 0.01,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 20,
+        "maximum_transmission_depth": 16,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-025",
+        "CAP-026",
+        "CAP-027",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-074",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-006",
+      "name": "Lunar Hero Master",
+      "status": "specified_unbound",
+      "goal": "lunar",
+      "resolution": {
+        "width": 3840,
+        "height": 2160
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 256,
+        "maximum_samples": 8192,
+        "relative_error_target": 0.005,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 24,
+        "maximum_transmission_depth": 20,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-025",
+        "CAP-026",
+        "CAP-027",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-074",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085",
+        "CAP-105"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-007",
+      "name": "Lunar Sample Macro",
+      "status": "specified_unbound",
+      "goal": "lunar",
+      "resolution": {
+        "width": 3072,
+        "height": 3072
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 256,
+        "maximum_samples": 8192,
+        "relative_error_target": 0.005,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 24,
+        "maximum_transmission_depth": 20,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-025",
+        "CAP-026",
+        "CAP-027",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-074",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085",
+        "CAP-105"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-008",
+      "name": "Animation Preview",
+      "status": "specified_unbound",
+      "goal": "animation",
+      "resolution": {
+        "width": 1280,
+        "height": 720
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 16,
+        "maximum_samples": 256,
+        "relative_error_target": 0.06,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 8,
+        "maximum_transmission_depth": 6,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": true
+      },
+      "motion": {
+        "enabled": true,
+        "shutter_fraction": 0.5,
+        "temporal_samples": 8,
+        "requires_approved_bake": true,
+        "sample_budget_policy": "One shutter-time sample per camera path, stratified over temporal_samples intervals; temporal_samples does not multiply the spatial sample budget.",
+        "shutter_alignment": "centered_on_frame_time",
+        "frame_rate_binding": "positive_finite_shot_frame_rate_hz_required"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-053",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-074",
+        "CAP-078",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085",
+        "CAP-111",
+        "CAP-112",
+        "CAP-119"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-009",
+      "name": "Animation Final",
+      "status": "specified_unbound",
+      "goal": "animation",
+      "resolution": {
+        "width": 3840,
+        "height": 2160
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 128,
+        "maximum_samples": 4096,
+        "relative_error_target": 0.012,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 16,
+        "maximum_transmission_depth": 12,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": true
+      },
+      "motion": {
+        "enabled": true,
+        "shutter_fraction": 0.5,
+        "temporal_samples": 32,
+        "requires_approved_bake": true,
+        "sample_budget_policy": "One shutter-time sample per camera path, stratified over temporal_samples intervals; temporal_samples does not multiply the spatial sample budget.",
+        "shutter_alignment": "centered_on_frame_time",
+        "frame_rate_binding": "positive_finite_shot_frame_rate_hz_required"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-053",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-074",
+        "CAP-078",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085",
+        "CAP-105",
+        "CAP-111",
+        "CAP-112",
+        "CAP-119"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    },
+    {
+      "id": "Q-010",
+      "name": "Reference Convergence",
+      "status": "specified_unbound",
+      "goal": "reference",
+      "resolution": {
+        "width": 2048,
+        "height": 2048
+      },
+      "integrator_intent": "path_tracing",
+      "sampling": {
+        "minimum_samples": 1024,
+        "maximum_samples": 16384,
+        "relative_error_target": 0.002,
+        "error_estimator": "Versioned relative standard error of scene-linear luminance with a documented dark-signal floor; adapter must bind an estimator before use.",
+        "maximum_samples_action": "Finish with an unconverged flag when the target is not met.",
+        "scope": "Estimated Monte Carlo uncertainty for the bound estimator, not total optical error, finite-depth bias, rare-path coverage or temporal error.",
+        "stopping_rule_binding": "Require a versioned pixel/tile aggregation rule and dark-signal floor before execution."
+      },
+      "transport": {
+        "maximum_depth": 32,
+        "maximum_transmission_depth": 24,
+        "russian_roulette_after_depth": 3,
+        "roulette_policy": "Compensated stochastic termination; finite depth is a declared truncation."
+      },
+      "denoising": {
+        "enabled": false,
+        "preserve_raw": true,
+        "temporal_validation_required": false
+      },
+      "motion": {
+        "enabled": false,
+        "shutter_fraction": 0.0,
+        "temporal_samples": 0,
+        "requires_approved_bake": false,
+        "sample_budget_policy": "No time integration.",
+        "shutter_alignment": "instantaneous",
+        "frame_rate_binding": "not_applicable"
+      },
+      "output": {
+        "master": "linear_exr",
+        "presentation": "png",
+        "color_transform": "project_declared",
+        "exposure_policy": "manual_locked"
+      },
+      "seed": 21026,
+      "required_capabilities": [
+        "CAP-001",
+        "CAP-002",
+        "CAP-003",
+        "CAP-004",
+        "CAP-005",
+        "CAP-006",
+        "CAP-025",
+        "CAP-026",
+        "CAP-027",
+        "CAP-057",
+        "CAP-058",
+        "CAP-059",
+        "CAP-073",
+        "CAP-074",
+        "CAP-081",
+        "CAP-083",
+        "CAP-085"
+      ],
+      "budget_policy": "Resolve memory and time against the selected executor; never switch devices or downgrade silently.",
+      "baseline_compatibility": "Future authoring target; resolve every field against the current executor before use.",
+      "validation": [
+        "Measure convergence in dark regolith and bright metal or glass regions.",
+        "Compare raw and finished results; preserve labels, fibers and thin wires.",
+        "Report elapsed time, peak memory and incomplete quality targets.",
+        "Compare multiple seeds and increased sample/depth budgets; an estimated noise threshold alone does not establish reference accuracy."
+      ],
+      "provenance_id": "ORIGINAL-2026-10-CATALOG",
+      "seed_policy": "Base seed; bind a versioned frame/pixel/sample/time-stratum stream policy and record it in the render manifest."
+    }
+  ]
+}

assets/render/physical/INTEGRATION.md

@@ -0,0 +1,153 @@
+# Physical material integration contract
+
+This resource slice is based on `6d79d44fa403581e4508d7c9df5e163ff85085bf`.
+It does not edit the parallel renderer implementation or the native document
+format. The native candidate-card schema is in
+[`crates/doc/src/physical_material.rs`](../../../crates/doc/src/physical_material.rs).
+The personal integration branch separately implements design-owned cards and
+library v2; capability checks must use the actual executing build.
+
+## Three independent representations
+
+1. **Extended reference profile:** the authoritative physical data with quantities,
+   individual source values, SI conversions, conditions, ranges, uncertainty,
+   directions and unresolved applicability. It is not a solver material model.
+2. **Native schema-1 card:** only the supported scalar point properties and complete
+   admitted elastic blocks. Unsupported data remains in the extended profile and
+   is listed in `not_projected`; it is never silently discarded.
+3. **Assigned document material:** the application's material object, its explicit
+   mass density, optional physical card and optional appearance. A profile link in
+   the render catalog is not evidence that this object has been created or assigned.
+
+`exports/native-cards.json` is a bundle of individually valid card objects plus
+projection metadata. It is not `solidcraft-library/1`, `solidcraft-library/2`, or
+an application command script. Do not pass its whole envelope as a single card.
+
+## Supported current commands
+
+The baseline read-only API is:
+
+```json
+{"command":"material.properties.validate","params":{"card":"<individual card object>"}}
+```
+
+Replace the placeholder string with the actual JSON object. It validates
+numerical/structural consistency and reports missing conditions and source review;
+it does not assign, persist or authenticate the data.
+
+The parallel personal runtime's persistence contract, inspected in its engine
+source, is `material.create` / `material.edit` with an explicit `physical_card`:
+
+```text
+material.create {name, density_g_cm3, physical_card}
+material.edit   {material, physical_card}
+```
+
+A host must first verify that its registered command specification supports
+`physical_card`; older command implementations may ignore fields they do not know.
+The generated `prepare` plan names this prerequisite and is not executed here.
+It does not issue `material.assign`, guess body names or create geometry.
+
+On the persistence implementation, **editing the physical card does not silently
+replace the document's mass density**. A discrepancy between card density in kg/m3
+and assigned density in g/cm3 must be shown and explicitly resolved. The creation
+plan uses the same selected point density in both fields. A range, missing density
+or unselected formulation cannot create a falsely precise material.
+
+For an existing body, retain its current physical material until a user explicitly
+selects a compatible reference profile. Changing a visual finish must retain
+physical fields, mass, joint geometry, body dimensions and material axes. Conversely,
+changing an engineering card must not recolor the body or replace its PBR maps.
+All document mutations must use the engine command/undo transaction, not direct
+JSON mutation or a Python runtime dependency.
+
+## Projection policy
+
+The current native schema permits density, isotropic/orthotropic elasticity,
+scalar tensile/compressive/yield/shear strengths, thermal conductivity/expansion
+and specific heat. This exporter deliberately does not manufacture missing
+constants to fill those fields.
+
+- An isotropic block requires a same-source compatible E and Poisson ratio. Where
+  Poisson ratio is explicitly derived from the same source's E and G, the formula
+  and derived status are retained and identified in the native condition text.
+- A single directional Young modulus is not a complete orthotropic tensor. Wood
+  flexural values and printed XY/Z coupon values stay directional in the extended
+  data; no isotropic substitute is introduced.
+- Lower/upper bounds and intervals do not become native nominal point values.
+  They remain listed omissions. No midpoint or minimum-as-typical substitution.
+- Directional thermal data is not copied into three axes. A repeated thermal
+  diagonal is allowed only for a profile explicitly marked as an isotropic
+  reference approximation, which the native state text discloses.
+- Each native property retains its own temperature, moisture and strain-rate
+  fields. Other source conditions, including an interval or test method, are
+  retained in its state text. Unknown conditions are null, not assumed room values.
+- Electrical data, hardness scales, radiative properties, porosity and transition
+  temperatures remain in the richer profile. Typed runtime support for these
+  quantities is separate work; preserve the extended data when designing it.
+
+A structurally valid empty card is not a usable numerical material. The bundle
+labels it `extended_data_only`; the coverage and native report separate those
+eleven records from the 48 nonempty partial cards.
+
+## Layers, compounds and analogues
+
+`bindings.json` states whether a concept is a bulk body, layer, deposit, treated
+surface, composite, textile, panel, granular material, device or assembly. Read
+both `physical_role` and every reference's `relation` before offering assignment.
+
+A constituent reference cannot be directly used as the effective mass density or
+stiffness of a foam, laminate, populated PCB, honeycomb or multi-layer blanket.
+Layer properties need thickness/coverage; homogenized properties need an explicit
+construction and admissible model. Do not turn an unqualified comparison into a
+default because it is the first reference in a list.
+
+Lunar-like concepts use named terrestrial simulants only where stated. Bulk
+packing density differs from grain density. Angle of repose is not substituted
+for an internal friction angle, and terrestrial packing data does not certify
+vacuum, gravity or thermal behavior on the Moon.
+
+## Future library v2 export
+
+The integrated runtime's `solidcraft_io::catalog` owns library serialization.
+It computes entry revisions from its compact serde representation of provenance
+and definition. Do not calculate an assumed equivalent Python hash or hand-write
+a catalog revision: cross-language float spelling and omitted fields can differ.
+
+The next runtime adapter should construct `ValidatedCard` through native admission,
+use the runtime's catalog types, retain provenance and the extended-profile ID,
+and generate the canonical revision through `Entry::new` / `content_revision`.
+Tests must cover import, undo/redo, saved reopen, unchanged appearance, density
+comparison and retention of unsupported extended fields. This slice performs
+none of those document mutations and does not claim them tested.
+
+## Validation boundaries
+
+The supplied runner can invoke a trusted installed CLI only for read-only card
+validation. The report identifies its binary hash and explicitly says that it
+was not rebuilt by this gate. Numeric admission is not a source-license decision,
+a physical experiment, a constitutive validation, a safety factor, a whole-app
+build, or evidence of physics-driven rendering.
+
+
+## Safe native library exporter
+
+`tools/export_library.py --acknowledge-reference` prepares a non-executing plan
+for the 46 point-density references and identifies 13 omitted profiles. Omission
+is explicit: the application requires a scalar mass density, but these profiles
+have no defensible scalar value. Full source profiles remain authoritative.
+
+With `--cli` the helper checks the executable's registered command contract before
+creating a new review folder or running a material mutation. It requires explicit
+physical-card support, native inspection and library-v2 export. It uses a fresh
+CLI process, no geometry and no existing user design. The actual application
+serializes the v2 catalog and its revisions; Python does not approximate serde
+canonicalization. Every card, source, condition and density is compared before
+and after a separate-process cold reopen/re-export. The extended unsupported
+properties remain in this package, not falsely marked as embedded in schema 1.
+
+The helper is an offline authoring/integration tool, not an application dependency.
+It never runs `material.assign` or changes a PBR appearance. Passing plan and
+refusal tests does not imply that modern-runtime persistence was executed; only
+a successful helper receipt establishes that separate result. Baseline read-only
+native admission and complete library export are deliberately distinct gates.

assets/render/physical/README.md

@@ -0,0 +1,133 @@
+# Sourced physical material references
+
+Expanded data checkpoint: **2026-10-22**. Physical engineering data is maintained
+separately from the authored render appearance. The original source files below
+are authoritative; exported native cards are reproducible projections, not a
+second independently edited dataset.
+
+## Delivered coverage
+
+| Collection | Current coverage |
+| --- | --- |
+| Named reference profiles | **59**, with **416 numerical records** covering **46 quantity types** |
+| Public primary source records | **50**, with locators, retrieval date and review limitations |
+| Material concept specifications | **600/600** have an explicit physical role, identification requirements and unknowns |
+| Concepts with reference candidates | **306**; these can be substrate, constituent, comparison or named-grade candidates |
+| Concepts still requiring a specific formulation | **294**; no unrelated numerical material is substituted |
+| Authored PBR surface associations | **48/48** linked to reviewed reference candidates and explicit physical-role rules |
+| Schema-1 native projections | **59 envelopes**: **48 nonempty**, **11 extended-only**, **113 native property blocks** |
+| References eligible for material creation | **46** have a supported point density; other references do not acquire an invented mass density |
+
+A surface reference association is **not identification of a manufactured part**.
+A metallic-looking coating is not a metal substrate; a fibre is not a laminate;
+feedstock is not an isotropic printed part; loose granular density is not grain
+density. References remain explicitly named and require grade, processing and
+conditions to match the intended application. No physical material is silently
+assigned to a body, and no appearance edit changes its engineering data.
+
+## Data and relationships
+
+- [profiles.json](profiles.json): the 59 exact material identities, numerical
+  values/ranges, original units, SI conversion, measurement conditions and limits.
+- [sources.json](sources.json): primary-source URLs, selected locators and review
+  records. Public availability is not a redistribution licence or authentication.
+- [quantities.json](quantities.json): units, dimensions and bounds. Hardness scales,
+  thermal transitions, frequencies and directional measurements remain distinct.
+- [bindings.json](bindings.json): all 600 concept specifications and 48 authored
+  surface relationships, including substrate/stack/recipe dependencies.
+- [exports/native-cards.json](exports/native-cards.json): conservative native
+  schema-1 projections, with every excluded property identified and retained in
+  the extended profiles. This is not itself a native library import file.
+- [exports/coverage.json](exports/coverage.json): generated coverage and exclusions.
+
+The references cover metals and solders, engineering polymers, silicones and
+resins, additive-manufacturing feedstock and specimens, woods, cork/MDF, glass and
+ceramics, PCB and composite constituents, coatings and terrestrial lunar
+simulants. New named references include PMMA sheet, PVC stock, Kevlar 49 fibre,
+cured epoxy, UV epoxy and specific alkyd, stoving-enamel and acrylic coatings.
+
+## Properties preserved
+
+Mechanical records include density, Young/shear/Poisson measurements, tensile,
+yield, compression, shear, flexural properties, elongation, fracture/tear data
+and explicitly identified hardness scales where published. Thermal records
+include conductivity, expansion, heat capacity, glass transition, melting,
+decomposition and qualified service-temperature statements. Electrical records
+retain frequency-specific permittivity/loss, resistivity and dielectric strength.
+Optical, moisture, granular and application-thickness records retain their own
+units and meaning; they are not reinterpreted as native elastic constants.
+
+Each numerical record preserves a source, original value/unit, conversion,
+qualifier, condition fields and limitations. A range is not reduced to its
+midpoint; a lower-bound strength is not a typical value. Missing conditions and
+uncertainties remain null/unknown. Per-property cure schedules survive native
+projection. An isotropic elastic block refuses mismatched source, temperature,
+moisture, rate, state or direction rather than combining unrelated constants.
+
+Some new coating profiles contain only published temperature or film-thickness
+information. Their cured density, modulus and strength remain unknown. In
+particular, liquid/mixed-resin density and package weight are not cured-film
+material properties. See [source review](SOURCE_REVIEW.md).
+
+## Validate and inspect
+
+All tools use Python 3.11+ standard-library code. From the repository root:
+
+```sh
+python -B assets/render/physical/tools/physical.py validate
+python -B -m unittest discover -s assets/render/physical/tools -p 'test_*.py'
+python -B assets/render/physical/tools/check_physical.py --cli /trusted/solidcraft-cli
+python -B assets/render/physical/tools/physical.py resolve SURF-001
+python -B assets/render/physical/tools/physical.py prepare steel-c45 --acknowledge-reference
+```
+
+The native check calls the read-only `material.properties.validate` command. It
+checks numerical admission and property preservation, **not** source authenticity,
+material assignment, solver correctness, persistence or library import. Evidence
+and executable hashes stay in ignored `target/physical-material-review/`.
+
+## Native library export without data loss
+
+Generate a non-executing plan for all point-density references:
+
+```sh
+python -B assets/render/physical/tools/export_library.py --acknowledge-reference
+```
+
+With a trusted runtime that actually supports physical-card persistence and
+library v2, create and verify a separate reference library:
+
+```sh
+python -B assets/render/physical/tools/export_library.py \
+  --acknowledge-reference --cli /trusted/card-capable/solidcraft-cli
+```
+
+Optional repeated `--profile ID` arguments restrict the selection. The exporter
+first verifies the command contract, then uses a fresh CLI design with no
+geometry, writes a native v2 library and design into a new `target/` directory,
+checks every card/source/condition/density, asks the native library inspector to
+verify content revisions, and cold-reopens/re-exports the design. It does not
+manually approximate Rust's canonical revision serialization. Existing files,
+live GUI sessions, user models and body assignments are untouched.
+
+**The baseline Pegasus CLI validates cards but cannot persist them in materials;
+the exporter therefore refuses it before creating anything.** Unit tests and that
+refusal are not a successful end-to-end v2 export. A successful modern-runtime run
+writes its own receipt; no such runtime receipt is implied by the authored data.
+The complete extended dataset must accompany the narrower native library.
+Electrical, hardness, ranges, directional measurements and unsupported quantities
+must not be claimed to have been embedded in schema 1 merely because a profile
+has a native projection.
+
+## Integration and publication
+
+Use [INTEGRATION.md](INTEGRATION.md) to connect the records to the separate Render
+branch. `runtime_assignment` remains false until actual target selection and
+application acceptance are performed. No native document migration, material-card
+schema expansion, rendering shader, solver, model, appearance texture or optical
+preset is changed here. Full workspace CI remains a separate integration gate.
+
+All new curation, validators and tooling are original contributor work under
+MIT OR Apache-2.0. Publisher data remains attributed to its sources; supplier
+brand/grade names do not imply affiliation or certification. Selected numerical
+facts are documented without bundling supplier tables, PDFs, artwork or code.

assets/render/physical/SOURCE_REVIEW.md

@@ -0,0 +1,140 @@
+# Source review and interpretation limits
+
+Research date: 2026-10-22. Exact URLs and source locators are stored in
+[sources.json](sources.json); each numerical record in [profiles.json](profiles.json)
+points to one of those references. Selection and normalization are original work.
+Supplier publications retain their own rights and are not bundled or relicensed.
+
+## Evidence levels
+
+The profiles distinguish typical values, published intervals, lower/upper bounds
+and explicitly calculated values. A manufacturer datasheet is evidence for the
+named grade and stated test, not identification of an object from its rendering.
+No record claims certified design allowables. A public URL and retrieval date are
+traceability metadata, not a signed source archive or proof that the URL can never
+change. Verify the relevant current datasheet and certificate before engineering use.
+
+Missing temperature, strain rate, specimen orientation or test method is marked
+unknown. Published crosshead speed is retained as speed, not guessed strain rate.
+A source's plus/minus notation is preserved without inventing its confidence level.
+
+## Conflicts and exclusions retained for review
+
+| Source or material | Treatment |
+| --- | --- |
+| Sandmeyer 304/304L | Use the identified main physical/plate tables; do not average different FAQ values. Typical plate strengths are not minimum-grade specifications. |
+| Elgiloy Nickel 200 | Keep the cited metric expansion value; a conflicting imperial entry is not used to create a second inconsistent constant. |
+| SAC305 solder | A field with resistivity units but a conductivity label is excluded rather than silently reinterpreted. Solid alloy data does not identify flux-bearing paste. |
+| PolyLite ABS | Product-page and wiki densities disagree, so density remains unresolved. The suspect modulus unit is not repaired by intuition. The retained XY/Z strengths remain directional. |
+| Isola 370HR | The modulus row cites a flexural test; retain it as flexural modulus, not a complete orthotropic elastic tensor. Dielectric-strength unit entries are not silently reconciled. |
+| Fused silica | A softening value is not used as a melting point; uncertain or inconsistent auxiliary optical entries were excluded. |
+| Amorim TPS | Use the cited aerospace table rather than mix differing values from another brand page. Room-condition reference properties do not prove ablation performance. |
+
+Every exclusion stays explicit in the relevant profile. Reference candidates that
+would imply wrong chemistry were removed during association review: HDPE is not a
+vinyl-flooring default; a glass profile is not a polymer interlayer; MDF is not an
+unspecified insulation core. Wrought 6061 may only be an explicitly labelled
+comparison for an unidentified casting, never a cast-alloy strength certificate.
+
+## Materials requiring special treatment
+
+### Wood and engineered panels
+
+USDA clear-wood results identify species, moisture and test orientation. Clear
+specimen means are not graded structural-lumber design values. Their bending
+modulus is not renamed tensile modulus or combined with an invented Poisson ratio.
+The specific-gravity basis is retained. For the cited 12% moisture rows, wet mass
+at the stated specimen volume is derived as `SG * 1000 * (1 + 0.12)` kg/m3, with
+1000 kg/m3 explicitly identified as the water-reference convention. That formula
+is recorded, checked and not extrapolated to another moisture content.
+
+Birch specimen properties are a veneer/constituent reference, not effective plywood
+properties. Panel layup, glue, moisture, thickness class and density must be known.
+MEDITE PREMIER >12 to 19 mm values are bounded panel specifications; the missing
+board density is not invented. Cork's MDFACADE product name is not confused with
+medium-density fibreboard.
+
+### Printing and composites
+
+Printed PLA/ABS coupon directions and reported spreads remain distinct. Feedstock
+solid density is not an infilled-part envelope density. SLS PA12 is not automatically
+a valid MJF material model. TPU density intervals remain intervals.
+
+AS4 fibre data describes a constituent. AS4/8552 unidirectional laminate data
+requires the stated fibre volume, cure and orientation. Neither describes a woven
+twill part simply because its texture resembles carbon fibre. The woven aramid
+surface remains unresolved until a particular fibre/resin/layup is selected.
+
+### Electronics, elastomers and coatings
+
+FR-4 dielectric values retain frequency, and expansion retains axis and thermal
+regime. A solder-mask appearance is not a single FR-4 property card for the whole
+board. Copper thickness, laminate construction, mask, components and interfaces
+need separate treatment.
+
+Dragon Skin 20's stress at 100% extension is not Young modulus. A reference casting
+silicone is not automatically qualified for cable insulation, optical lenses or
+space seals. Filled potting and IC mould compounds need their actual filler/cure
+recipe; unfilled casting epoxy is only a labelled comparison.
+
+AZ-93 thermal emittance and solar absorptance retain their coating context and
+thickness condition. They are not visible RGB, material emission strength or a
+bulk heat capacity. A coating's nominal application thickness is not an automatic
+thickness assignment to a CAD model.
+
+### Lunar-like resources
+
+The four Exolith datasets are terrestrial laboratory analogues. Grain density,
+packing density, void ratio, porosity and apparatus-dependent repose angle remain
+separate. They do not identify a geological site, vacuum condition, internal
+friction law or reduced-gravity mechanical response. Rock concepts are not assigned
+loose-soil density merely to increase numeric coverage.
+
+## Review backlog
+
+The 294 concepts without an applicable named reference need a selected recipe,
+grade or multi-material construction. The 306 with candidates still require review
+of their stated relation and conditions; some references are constituents or
+explicit comparisons, not effective-property defaults. No numerical completeness
+percentage is derived from these association counts.
+
+Further evidence is especially needed for actual paint/cure stacks, woven aramid
+laminates, named glass/polymer optical grades, flexible-cable formulations, filled
+thermal interfaces, resin systems, foams, friction materials and aerospace-qualified
+processes. Temperature-dependent curves, fatigue, creep, damping, outgassing and
+failure envelopes should be added as documented quantities/models, not filled with
+uncited family averages.
+
+
+## Added source review — 2026-10-22
+
+Eight additional primary supplier/manufacturer references add 43 selected records,
+bringing the dataset to 59 profiles, 50 source records and 416 numerical records.
+All 48 authored surfaces now have an explicit reference-candidate relationship.
+This does not make the 600 concepts numerically complete or identify their actual
+manufacturing recipe.
+
+PMMA sheet preserves published intervals for stiffness, Poisson ratio, heat
+capacity, thermal expansion/conductivity and electrical resistivity; no midpoint
+is selected for elasticity. Rigid PVC stock data does not identify plasticized
+cable insulation. Kevlar 49 axial fibre data does not establish cured laminate or
+meta-aramid paper/honeycomb properties; those mappings remain separate.
+
+Sikafloor 161 HC compressive and flexural data retain the 28-day cure at 23 C;
+its Shore D datum retains the 7-day cure. The manufacturer's mixed-liquid density
+is not assigned to the cured resin. UV22 retains two different glass-transition
+ranges, distinguishing UV-only cure from thermal post-cure. Its refractive index
+is not a spectral model or certified optical transmission curve.
+
+C71 Speedline, Stoving Enamel Hammer and Acrythane SC601 remain named coating
+candidates with only the published temperature and/or coverage-basis dry-film
+thickness recorded. Temperature statements without duration are upper-bound
+manufacturer references, not continuous-use allowables. No cured density, modulus,
+strength or film mass is inferred from paint package weights, liquid densities,
+nominal coverage, visual roughness or colour. Those unknowns remain visible.
+
+The inspected Kuhn PVC page contains blank mechanical cells and a hardness row
+with inconsistent units. Neither is imported. Public reference metadata preserves
+the source relationship without claiming that an openly accessible supplier page
+has a permissive dataset licence. No PDF, table layout, prose, logo or image from
+those publishers is included in this repository.

assets/render/physical/exports/coverage.json

@@ -0,0 +1,65 @@
+{
+  "schema": "solidcraft-physical-coverage/1",
+  "profile_count": 59,
+  "source_count": 50,
+  "property_records": 416,
+  "catalog_specifications": 600,
+  "concepts_with_reference_candidates": 306,
+  "concepts_needing_specific_recipe": 294,
+  "surface_specifications": 48,
+  "surfaces_with_reference_candidates": 48,
+  "native_property_blocks": 113,
+  "nonempty_native_cards": 48,
+  "extended_only_profiles": 11,
+  "profiles_with_point_density": 46,
+  "quantities": {
+    "angle_of_repose": 8,
+    "compressive_modulus": 2,
+    "compressive_strength": 14,
+    "decomposition_temperature": 2,
+    "density": 49,
+    "dielectric_strength": 7,
+    "dry_film_thickness": 4,
+    "electrical_conductivity_iacs": 3,
+    "elongation_break": 19,
+    "flexural_modulus": 14,
+    "flexural_strength": 16,
+    "fracture_toughness": 1,
+    "glass_transition": 11,
+    "grain_density": 4,
+    "hardness_brinell": 2,
+    "hardness_janka": 10,
+    "hardness_knoop": 2,
+    "hardness_shore_a": 2,
+    "hardness_shore_d": 11,
+    "heat_deflection": 9,
+    "internal_bond_strength": 1,
+    "loss_tangent": 9,
+    "mean_particle_size": 4,
+    "melting_temperature": 7,
+    "poisson_ratio": 8,
+    "porosity": 4,
+    "refractive_index": 6,
+    "relative_permittivity": 10,
+    "service_temperature": 2,
+    "shear_modulus": 3,
+    "shear_strength": 10,
+    "solar_absorptance": 1,
+    "specific_gravity": 10,
+    "specific_heat": 16,
+    "stress_at_strain": 1,
+    "tear_strength": 1,
+    "tensile_strength": 24,
+    "thermal_conductivity": 24,
+    "thermal_emittance": 1,
+    "thermal_expansion": 26,
+    "thickness_swelling": 1,
+    "void_ratio": 4,
+    "volume_resistivity": 14,
+    "water_absorption": 3,
+    "yield_strength": 10,
+    "young_modulus": 26
+  },
+  "runtime_assignment": false,
+  "numerically_complete_catalog_claim": false
+}

assets/render/physical/quantities.json

@@ -0,0 +1,209 @@
+{
+  "schema": "solidcraft-physical-quantities/1",
+  "units": {
+    "density": "kg/m^3",
+    "young_modulus": "Pa",
+    "poisson_ratio": "1",
+    "shear_modulus": "Pa",
+    "tensile_strength": "Pa",
+    "yield_strength": "Pa",
+    "compressive_strength": "Pa",
+    "flexural_strength": "Pa",
+    "flexural_modulus": "Pa",
+    "elongation_break": "1",
+    "thermal_conductivity": "W/(m K)",
+    "thermal_expansion": "1/K",
+    "specific_heat": "J/(kg K)",
+    "glass_transition": "K",
+    "melting_temperature": "K",
+    "heat_deflection": "K",
+    "volume_resistivity": "ohm m",
+    "relative_permittivity": "1",
+    "loss_tangent": "1",
+    "dielectric_strength": "V/m",
+    "water_absorption": "1",
+    "hardness_shore_a": "1",
+    "hardness_shore_d": "1",
+    "hardness_knoop": "1",
+    "hardness_janka": "N",
+    "service_temperature": "K",
+    "specific_gravity": "1",
+    "stress_at_strain": "Pa",
+    "tear_strength": "N/m",
+    "refractive_index": "1",
+    "decomposition_temperature": "K",
+    "compressive_modulus": "Pa",
+    "electrical_conductivity_iacs": "1",
+    "fracture_toughness": "Pa sqrt(m)",
+    "shear_strength": "Pa",
+    "hardness_brinell": "1",
+    "grain_density": "kg/m^3",
+    "porosity": "1",
+    "void_ratio": "1",
+    "mean_particle_size": "m",
+    "angle_of_repose": "rad",
+    "thermal_emittance": "1",
+    "solar_absorptance": "1",
+    "dry_film_thickness": "m",
+    "internal_bond_strength": "Pa",
+    "thickness_swelling": "1"
+  },
+  "conversions": {
+    "kg/m^3": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "g/cm^3": {
+      "scale": 1000.0,
+      "offset": 0.0
+    },
+    "Pa": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "kPa": {
+      "scale": 1000.0,
+      "offset": 0.0
+    },
+    "MPa": {
+      "scale": 1000000.0,
+      "offset": 0.0
+    },
+    "GPa": {
+      "scale": 1000000000.0,
+      "offset": 0.0
+    },
+    "psi": {
+      "scale": 6894.757293168,
+      "offset": 0.0
+    },
+    "ksi": {
+      "scale": 6894757.293168,
+      "offset": 0.0
+    },
+    "1": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "%": {
+      "scale": 0.01,
+      "offset": 0.0
+    },
+    "W/(m K)": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "1/K": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "ppm/K": {
+      "scale": 1e-06,
+      "offset": 0.0
+    },
+    "1/degF": {
+      "scale": 1.8,
+      "offset": 0.0
+    },
+    "J/(kg K)": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "J/(g K)": {
+      "scale": 1000.0,
+      "offset": 0.0
+    },
+    "K": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "degC": {
+      "scale": 1.0,
+      "offset": 273.15
+    },
+    "ohm m": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "ohm cm": {
+      "scale": 0.01,
+      "offset": 0.0
+    },
+    "microohm cm": {
+      "scale": 1e-08,
+      "offset": 0.0
+    },
+    "ohm mm^2/m": {
+      "scale": 1e-06,
+      "offset": 0.0
+    },
+    "V/m": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "kV/mm": {
+      "scale": 1000000.0,
+      "offset": 0.0
+    },
+    "V/mil": {
+      "scale": 39370.07874015748,
+      "offset": 0.0
+    },
+    "N": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "N/m": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "pli": {
+      "scale": 175.1268352465,
+      "offset": 0.0
+    },
+    "lb/in^3": {
+      "scale": 27679.904710203,
+      "offset": 0.0
+    },
+    "Btu/(h ft degF)": {
+      "scale": 1.730734666371,
+      "offset": 0.0
+    },
+    "Btu/(lb degF)": {
+      "scale": 4186.8,
+      "offset": 0.0
+    },
+    "MPa sqrt(m)": {
+      "scale": 1000000.0,
+      "offset": 0.0
+    },
+    "Pa sqrt(m)": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "degF": {
+      "scale": 0.5555555555555556,
+      "offset": 255.3722222222222
+    },
+    "micrometre": {
+      "scale": 1e-06,
+      "offset": 0.0
+    },
+    "mil": {
+      "scale": 2.54e-05,
+      "offset": 0.0
+    },
+    "degree": {
+      "scale": 0.017453292519943295,
+      "offset": 0.0
+    },
+    "rad": {
+      "scale": 1.0,
+      "offset": 0.0
+    },
+    "m": {
+      "scale": 1.0,
+      "offset": 0.0
+    }
+  }
+}

assets/render/physical/sources.json

@@ -0,0 +1,505 @@
+{
+  "schema": "solidcraft-physical-sources/1",
+  "sources": [
+    {
+      "id": "sandmeyer-304",
+      "title": "Sandmeyer Steel Alloy 304/304L plate",
+      "url": "https://www.sandmeyersteel.com/alloy-304-304l/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Main Physical Properties and Typical Mechanical Properties (.375 in plate), not FAQ",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "alfa-6061",
+      "title": "Alfa Chemistry aluminium alloy 6061",
+      "url": "https://alloys.alfa-chemistry.com/aluminum-alloy-6061.html",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical properties and T6 sheet (0.020-0.500 in) typical properties",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "metalcor-ti5",
+      "title": "Metalcor titanium grade 5 3.7164/65",
+      "url": "https://www.metalcor.de/en/datenblatt/125/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Mechanical and Physical Properties at 20 C",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "cda-c11000",
+      "title": "Copper Development Association C11000",
+      "url": "https://alloys.copper.org/alloy/C11000",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical properties table; property-specific temperatures",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "cda-c36000",
+      "title": "Copper Development Association C36000",
+      "url": "https://alloys.copper.org/alloy/C36000",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical properties table; property-specific temperatures",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "cda-c93200",
+      "title": "Copper Development Association C93200",
+      "url": "https://alloys.copper.org/alloy/C93200",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical properties table; property-specific temperatures",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "elgiloy-ni200",
+      "title": "Elgiloy Nickel 200 and 201 strip",
+      "url": "https://www.elgiloy.com/strip-nickel-200-and-201-alloys",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical properties; room-temperature modulus table",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "feinhuette-sac305",
+      "title": "Feinhuette SAC305 electronic solder",
+      "url": "https://www.feinhuette.de/en/metals/sn965ag3cu05",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical Data",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-abs-stock",
+      "title": "Ensinger TECARAN ABS grey",
+      "url": "https://www.ensingerplastics.com/en/shapes/tecaran-abs-grey",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Facts and Technical details; exact grade/stock-shape values",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-pom-c",
+      "title": "Ensinger TECAFORM AH natural POM-C",
+      "url": "https://www.ensingerplastics.com/en-gb/shapes/acetal-tecaform-ah-natural",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Facts and Technical details; exact grade/stock-shape values",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-peek",
+      "title": "Ensinger TECAPEEK natural PEEK",
+      "url": "https://www.ensingerplastics.com/en/shapes/peek-tecapeek-natural",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Facts and Technical details; exact grade/stock-shape values",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-pc",
+      "title": "Ensinger TECANAT natural PC",
+      "url": "https://www.ensingerplastics.com/en-gb/shapes/polycarbonate-tecanat-natural",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Facts and Technical details; exact grade/stock-shape values",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-pa6-stock",
+      "title": "Ensinger TECAMID 6 natural PA6",
+      "url": "https://www.ensingerplastics.com/en/shapes/pa6-tecamid-6-natural",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Facts and Technical details; exact grade/stock-shape values",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-ptfe",
+      "title": "Ensinger TECAFLON PTFE natural",
+      "url": "https://www.ensingerplastics.com/en/shapes/tecaflon-ptfe-natural",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Facts and Technical details",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "goodfellow-kapton",
+      "title": "Goodfellow Kapton HN PI coil",
+      "url": "https://www.goodfellow.com/global/kapton-hn-pi-coil-group",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Technical properties of supplied coil",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ovako-c45",
+      "title": "Ovako C45 steel navigator",
+      "url": "https://steelnavigator.ovako.com/steel-grades/c45/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Other properties; general grade, not an unspecified heat-treatment strength",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-pp",
+      "title": "Ensinger TECAFINE PP grey",
+      "url": "https://www.ensingerplastics.com/en-sg/shapes/polypropylene-tecafine-pp-grey",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Technical details for stock shape",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "ensinger-hdpe",
+      "title": "Ensinger TECAFINE PE 300 black",
+      "url": "https://www.ensingerplastics.com/en-gb/shapes/polyethylene-tecafine-pe-300-black",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Technical details for stock shape",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "schott-borofloat",
+      "title": "SCHOTT BOROFLOAT 33 technical details",
+      "url": "https://www.schott.com/en-us/products/borofloat-p1000314/technical-details",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical, thermal, mechanical and optical tables",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "crystran-silica",
+      "title": "Crystran fused silica SiO2",
+      "url": "https://www.crystran.com/optical-materials/fused-silica-sio2/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Optical material data table; inconsistent molecular/softening labels not imported",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "crystran-sapphire",
+      "title": "Crystran sapphire Al2O3",
+      "url": "https://www.crystran.com/optical-materials/sapphire-al2o3/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical and optical constants; crystal orientation explicit",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "coorstek-ad96",
+      "title": "CoorsTek alumina AD-96",
+      "url": "https://www2.coorstek.com/en/materials/alumina/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "AD-96 column, nominal material-property comparison",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "smoothon-ds20",
+      "title": "Smooth-On Dragon Skin 20",
+      "url": "https://www.smooth-on.com/products/dragon-skin-20/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Technical data; 100% modulus is a finite-strain stress, not Young modulus",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "smoothon-ep690",
+      "title": "Smooth-On EpoxAcast 690",
+      "url": "https://www.smooth-on.com/products/epoxacast-690/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Cured casting technical properties",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "polymaker-pla",
+      "title": "Polymaker PolyLite PLA technical sheet",
+      "url": "https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/pla/polylite-tm-pla",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Thermal and XY/Z mechanical properties of specified printed test specimens",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "polymaker-abs",
+      "title": "Polymaker PolyLite ABS product specification",
+      "url": "https://shop.polymaker.com/products/polylite-abs/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Mechanical XY/Z and thermal table; conflicting density/modulus excluded",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "polymaker-abs-wiki",
+      "title": "Polymaker PolyLite ABS wiki sheet",
+      "url": "https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/abs-asa/polylite-tm-abs",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Density discrepancy, retained for resolution rather than averaged",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "polymaker-tpu",
+      "title": "Polymaker PolyFlex TPU95 technical sheet",
+      "url": "https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/tpu/polyflex-tm-tpu95",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Material density range and nominal Shore hardness",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "eos-pa2200",
+      "title": "EOS PA 2200 PA12 reference",
+      "url": "https://www.eos.info/polymer-solutions/polymer-materials/biocompatible",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "PA 2200 typical part properties; not the different CarbonReduced record",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "isola-370hr",
+      "title": "Isola 370HR laminate and prepreg",
+      "url": "https://www.isola-group.com/pcb-laminates-prepreg/370hr-laminate-prepreg/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Typical Values, revision E (2024-06); not construction-specific Dk tables",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "hexcel-as4",
+      "title": "Hexcel HexTow AS4 continuous fibre and laminate data",
+      "url": "https://www.hexcel.com/Products/Carbon-Fiber/HexTow-Continuous-Carbon-Fiber/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "AS4 12K fibre and AS4/8552 unidirectional laminate columns",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "usda-wood-2021",
+      "title": "USDA Wood Handbook 2021 Chapter 5",
+      "url": "https://research.fs.usda.gov/download/treesearch/62244.pdf",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Table 5-3a, printed pages 5-4, 5-6 and 5-7; 12% moisture clear wood",
+      "license": "US federal government publication; source notice should still be reviewed",
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "amorim-md-facade",
+      "title": "Amorim MDFACADE decorative cork board",
+      "url": "https://www.amorimcorkinsulation.com/en/applications/Decorative-board-Cork-at-sight/162/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Technical Features, additive-free decorative expanded cork",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "amorim-tps",
+      "title": "Amorim aerospace TPS P45/P50",
+      "url": "https://amorimcorksolutions.com/en-us/materials-applications/aerospace/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Metric TPS materials table; this page is distinct from legacy brand-page values",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "std-polyester-powder",
+      "title": "Standard Group MT-D1036 polyester powder",
+      "url": "https://www.std-coatings.com/Powder/564.html",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Powder properties, colour-dependent specific-gravity range; not an Interpon product",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "az93",
+      "title": "AZ Technology AZ-93 inorganic coating",
+      "url": "https://www.aztechnology.com/product/1/az-93",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Cured AZ-93 specifications; radiative properties are not visible RGB or volumetric emission",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "az-primer",
+      "title": "AZ Technology MLP-300-AZ primer",
+      "url": "https://www.aztechnology.com/product/29/mlp-300-az",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Cured primer specifications",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "medite-premier",
+      "title": "MEDITE PREMIER datasheet prem-ds-en-13",
+      "url": "https://medite-smartply.files.svdcdn.com/production/files/MEDITE-PREMIER-Datasheet-prem-ds-en-13.pdf",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "PDF page 5, Technical Specification Sheet; >12 to 19 mm column",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "exolith-lms-1",
+      "title": "Exolith Lab LMS-1 mare simulant",
+      "url": "https://exolithsimulants.com/collections/regolith-simulants/products/lms-1-lunar-mare-simulant",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical Properties; terrestrial simulant reference, not an Apollo sample",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "exolith-lhs-1",
+      "title": "Exolith Lab LHS-1 highlands simulant",
+      "url": "https://exolithsimulants.com/collections/regolith-simulants/products/lhs-1-lunar-highlands-simulant",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical Properties; terrestrial simulant reference, not an Apollo sample",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "exolith-lms-1d",
+      "title": "Exolith Lab LMS-1D mare dust simulant",
+      "url": "https://exolithsimulants.com/collections/regolith-simulants/products/lms-1d",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical Properties; terrestrial simulant reference, not an Apollo sample",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "exolith-lhs-1d",
+      "title": "Exolith Lab LHS-1D highlands dust simulant",
+      "url": "https://exolithsimulants.com/collections/regolith-simulants/products/lhs-1d-lunar-highland-dust-simulant",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical Properties; terrestrial simulant reference, not an Apollo sample",
+      "license": null,
+      "review": "Selected numerical facts transcribed with original structure; no supplier document, image, implementation or complete table is redistributed."
+    },
+    {
+      "id": "goodfellow-pmma-sheet",
+      "title": "Goodfellow PMMA film and sheet reference",
+      "url": "https://www.goodfellow.com/eu/pmma-film-group",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical, electrical, mechanical and thermal property sections; ranges retain their endpoints.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "goodfellow-kevlar49",
+      "title": "Goodfellow Kevlar 49 polyaramid fibre",
+      "url": "https://www.goodfellow.com/global/kevlar-49-polyaramid-fibre-group",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Physical, thermal and mechanical properties of the supplied fibre, not a cured woven laminate.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "kuhn-pvc-stock",
+      "title": "Kuhn PVC stock-material reference",
+      "url": "https://www.kuhn-marsberg.de/en/product/PVC/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Density, thermal conductivity and electrical properties; ambiguous hardness-unit and empty cells excluded.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "sika-161-cured",
+      "title": "Sika Sikafloor 161 HC cured resin reference",
+      "url": "https://phl.sika.com/en/construction/flooring/industry-wet-areas/epoxy-flooring-system/sikafloor-161-hc.html",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Cured resin hardness at 7 days and strengths at 28 days, +23 C. Mixed-resin density is not cured density.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "masterbond-uv22",
+      "title": "Master Bond UV22 UV-cured epoxy",
+      "url": "https://www.masterbond.com/tds/uv22",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Typical properties and cure-specific glass-transition ranges; no numerical outgassing result imported.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "hmg-c71",
+      "title": "HMG C71 Speedline machinery enamel",
+      "url": "https://hmgpaint.mybigcommerce.com/c71-speedline/",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Manufacturer product description: temperature resistance up to 170 C, dependent on colour; matt, satin and gloss variants.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "hmg-hammer-stoving",
+      "title": "HMG Stoving Enamel Hammer TOPSTV",
+      "url": "https://www.hmgpaint.com/products/all-products/topcoat/1928/stoving-enamel-hammer",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Technical properties: coverage basis at 25 micrometres DFT and temperature resistance 160 C.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    },
+    {
+      "id": "hmg-sc601-clear",
+      "title": "HMG Acrythane SC601 Clearcoat",
+      "url": "https://hmgpaint.com/products/all-products/topcoat/1942/acrythane-sc601-clearcoat",
+      "accessed_on": "2026-10-22",
+      "kind": "public_reference",
+      "locator": "Two-component acrylic/isocyanate clearcoat; stated coverage basis 25 micrometres DFT. No cured density or modulus stated.",
+      "license": null,
+      "review": "Selected numerical facts and explicit source conditions, not a copied supplier table. Publicly indexed manufacturer/supplier data were reviewed; publisher rights are not relicensed. No safety or grade certificate is implied."
+    }
+  ]
+}

assets/render/physical/tools/check_physical.py

@@ -0,0 +1,107 @@
+#!/usr/bin/env python3
+"""Run physical-data checks and optional read-only native card admission.
+
+The optional --cli must point to a trusted existing SolidCraft CLI executable.
+It only runs material.properties.validate in fresh CLI processes; it never runs
+material.create, material.assign, opens a user's document or writes a native design.
+Evidence stays under ignored target/. This is not aggregate workspace CI.
+"""
+from __future__ import annotations
+import argparse
+import copy
+from datetime import datetime, timezone
+import hashlib
+import json
+from pathlib import Path
+import subprocess
+import sys
+import time
+
+import physical
+
+
+def digest_file(path):
+    h=hashlib.sha256()
+    with path.open('rb') as f:
+        for block in iter(lambda:f.read(1024*1024),b''):h.update(block)
+    return h.hexdigest()
+
+
+def snapshot():
+    paths=[p for p in physical.PACK.rglob('*') if p.is_file() and '__pycache__' not in p.parts]
+    paths += [physical.ROOT/p for p in ('docs/render-materials/materials.json','assets/render/starter/materials/manifest.json',
+                                      'crates/doc/src/physical_material.rs','crates/engine/src/cmd/material_properties.rs','ATTRIBUTION.md')]
+    return {p.relative_to(physical.ROOT).as_posix():digest_file(p) for p in sorted(paths)}
+
+
+def invoke(cli,card):
+    payload=json.dumps({'card':card},ensure_ascii=True,separators=(',',':'),allow_nan=False)
+    physical.require(len(payload)<65536,'native candidate exceeds invocation budget')
+    result=subprocess.run([str(cli),'exec','material.properties.validate',payload],cwd=physical.ROOT,
+                          capture_output=True,timeout=30)
+    physical.require(len(result.stdout)+len(result.stderr)<4*1024*1024,'native output exceeds budget')
+    if result.returncode:return result,None
+    return result,json.loads(result.stdout,object_pairs_hook=physical.unique,parse_constant=physical.reject_constant)
+
+
+def native_check(cli,items):
+    physical.require(cli.is_file(),'trusted native CLI not found')
+    identity={'name':cli.name,'sha256':digest_file(cli),'rebuilt_by_this_gate':False}
+    receipts=[]
+    for i,item in enumerate(items):
+        result,value=invoke(cli,item['card'])
+        physical.require(result.returncode==0 and isinstance(value,dict) and value.get('valid') is True,
+                         f"native card admission failed: {item['profile_id']}: {result.stderr.decode(errors='replace')[-500:]}")
+        report=value.get('validation',{})
+        expected=sorted(r['data']['kind'] for r in item['card']['properties'])
+        physical.require(sorted(report.get('property_kinds',[]))==expected,'native property kinds changed or were dropped')
+        receipts.append({'profile_id':item['profile_id'],'valid':True,'property_kinds':expected,
+                         'empty_projection':not expected,'source_review_required':report.get('source_review_required'),
+                         'missing_condition_fields':report.get('missing_condition_fields'),
+                         'isotropic_moduli':report.get('isotropic_moduli')})
+        if (i+1)%12==0:print(json.dumps({'native_cards_checked':i+1,'total':len(items)}),flush=True)
+    template=next(x['card'] for x in items if x['profile_id']=='steel-c45')
+    bad=[]
+    x=copy.deepcopy(template);next(r for r in x['properties'] if r['data']['kind']=='elasticity')['data']['model']['poisson_ratio']=.5;bad.append(('unstable-isotropic',x))
+    x=copy.deepcopy(template);x['properties'][0]['source_id']='missing';bad.append(('unknown-source',x))
+    x=copy.deepcopy(template);x['properties'].append(copy.deepcopy(x['properties'][0]));bad.append(('duplicate-property',x))
+    x=copy.deepcopy(template);next(r for r in x['properties'] if r['data']['kind']=='density')['data']['kg_m3']=-1;bad.append(('negative-density',x))
+    refused=[]
+    for label,card in bad:
+        result,value=invoke(cli,card)
+        physical.require(result.returncode!=0 or isinstance(value,dict) and value.get('valid') is False,
+                         f'hostile card was accepted: {label}')
+        refused.append(label)
+    return {'binary':identity,'admitted_card_envelopes':len(receipts),
+            'nonempty_cards':sum(not r['empty_projection'] for r in receipts),
+            'empty_cards_not_ready':sum(r['empty_projection'] for r in receipts),
+            'hostile_cases_refused':refused,'receipts':receipts,'persistence_tested':False,'body_assignment_tested':False}
+
+
+def main():
+    parser=argparse.ArgumentParser(description=__doc__);parser.add_argument('--cli',type=Path)
+    args=parser.parse_args();stamp=datetime.now(timezone.utc).strftime('%Y%m%dT%H%M%S.%fZ')
+    folder=physical.ROOT/'target/physical-material-review'/stamp;folder.mkdir(parents=True,exist_ok=False)
+    start=time.monotonic();before=snapshot();report={'schema':'solidcraft-physical-check/1','status':'fail','source_inputs':before,
+      'python':sys.version.split()[0],'full_workspace_ci':'not_run_by_this_gate','runtime_assignment':False}
+    exit_code=1
+    try:
+        result=subprocess.run([sys.executable,'-B','-m','unittest','discover','-s','assets/render/physical/tools','-p','test_*.py'],
+                              cwd=physical.ROOT,capture_output=True,timeout=120)
+        (folder/'python-tests.stdout.txt').write_bytes(result.stdout);(folder/'python-tests.stderr.txt').write_bytes(result.stderr)
+        physical.require(result.returncode==0,'physical Python regressions failed')
+        report['python_tests']=result.stderr.decode(errors='replace')[-1000:]
+        report['coverage']=physical.validate()
+        bundle=physical.read(physical.PACK/'exports/native-cards.json')
+        report['native']=native_check(args.cli,bundle['items']) if args.cli else {'status':'not_requested'}
+        after=snapshot();physical.require(before==after,'physical/source inputs changed during validation')
+        report['source_inputs_unchanged']=True;report['status']='pass';exit_code=0
+    except (OSError,ValueError,TypeError,KeyError,subprocess.SubprocessError) as error:
+        report['error']=str(error)
+    report['seconds']=round(time.monotonic()-start,3)
+    (folder/'report.json').write_bytes(physical.encoded(report))
+    print(json.dumps({'status':report['status'],'report':str((folder/'report.json').relative_to(physical.ROOT)),
+                      'native_requested':bool(args.cli),'runtime_assignment':False,'error':report.get('error')},indent=2))
+    return exit_code
+
+if __name__=='__main__':raise SystemExit(main())

assets/render/physical/tools/export_library.py

@@ -0,0 +1,178 @@
+#!/usr/bin/env python3
+"""Export chosen reference materials through a trusted card-capable SolidCraft CLI.
+
+A fresh command-line session creates no geometry or body assignments. The native
+application owns library-v2 serialization and content revisions. All output stays
+in a new review directory under target/. Older scalar-only executables refuse
+before any material is created. Public reference data is not design certification.
+"""
+from __future__ import annotations
+
+import argparse
+from datetime import datetime, timezone
+import hashlib
+import json
+from pathlib import Path
+import subprocess
+import sys
+import tempfile
+
+import physical as p
+
+MAX_OUTPUT = 16 * 1024 * 1024
+PACK_ID = "tangency.physical-references"
+SOURCE_FILES = ("profiles.json", "sources.json", "bindings.json", "quantities.json",
+                "exports/native-cards.json", "tools/physical.py", "tools/export_library.py")
+
+
+def input_pins() -> dict[str, str]:
+    return {name: p.sha(p.PACK/name) for name in SOURCE_FILES}
+
+
+def selection(ids: list[str] | None, acknowledge: bool) -> dict:
+    p.require(acknowledge, "Explicit --acknowledge-reference is required")
+    before = input_pins()
+    p.validate()
+    profiles, sources, _ = p.load()
+    selected, omitted = [], []
+    names = sorted(profiles) if ids is None else ids
+    p.require(isinstance(names, list) and 0 < len(names) <= 256, "Select 1..256 profiles")
+    p.require(all(isinstance(name, str) for name in names) and len(names) == len(set(names)), "Duplicate or invalid selected profile")
+    for id in names:
+        p.require(id in profiles, f"Unknown profile: {id}")
+        native = p.native_card(profiles[id], sources)
+        density = next((row for row in native['card']['properties'] if row['data']['kind'] == 'density'), None)
+        if density is None:
+            omitted.append({'profile_id': id, 'reason': 'No supported point density; no nominal midpoint or unrelated substrate is substituted.'})
+            continue
+        selected.append({'profile_id': id, 'material_form': profiles[id]['material_form'],
+                         'command': p.prepare(id, True)['commands'][0],
+                         'extended_property_ids': [row['id'] for row in native['not_projected']]})
+    p.require(selected, "No selected reference has a supported point density")
+    p.require(before == input_pins(), "Source revision changed during plan preparation")
+    return {'schema': 'solidcraft-physical-library-plan/1', 'executed': False,
+            'reference_selection_required': True, 'assigns_bodies': False,
+            'id': PACK_ID, 'input_sha256': before, 'materials': selected, 'omitted': omitted,
+            'preserve_extended_profiles': True,
+            'required_contract': 'material.create physical_card, material.inspect, solidcraft-library/2'}
+
+
+def registry_check(registry: object) -> None:
+    p.require(isinstance(registry, list) and len(registry) <= 4096, "Invalid native command registry")
+    p.require(all(isinstance(row, dict) and isinstance(row.get('id'), str) for row in registry), "Malformed native command record")
+    commands = {row['id']: row for row in registry}
+    p.require(len(commands) == len(registry), "Duplicate command ID")
+    for name in ('file.new', 'material.create', 'material.inspect', 'library.export', 'library.inspect'):
+        p.require(name in commands, f"Native command unavailable: {name}")
+    p.require(all(isinstance(commands[name].get('params'), str) for name in ('material.create', 'library.export')), 'Malformed native parameter documentation')
+    p.require('physical_card' in commands['material.create'].get('params', ''),
+              "This executable cannot preserve physical cards; scalar material creation is refused")
+    p.require('solidcraft-library/2' in commands['library.export'].get('params', ''),
+              "Native library-v2 export is required; scalar export would lose engineering data")
+
+
+def invoke(cli: Path, arguments: list[str]) -> object:
+    # Capture into temporary files, then enforce the JSON byte budget before reading.
+    with tempfile.TemporaryFile() as out, tempfile.TemporaryFile() as err:
+        result = subprocess.run([str(cli), *arguments], cwd=p.ROOT, stdout=out, stderr=err, timeout=180)
+        p.require(out.tell() <= MAX_OUTPUT and err.tell() <= MAX_OUTPUT, "CLI output exceeds the diagnostic budget")
+        err.seek(0)
+        p.require(result.returncode == 0, 'Native command failed: ' + err.read(2048).decode(errors='replace'))
+        out.seek(0)
+        return json.load(out, object_pairs_hook=p.unique, parse_constant=p.reject_constant)
+
+
+def verify_catalog(catalog: object, plan: dict) -> None:
+    p.require(isinstance(catalog, dict) and catalog.get('format') == 'solidcraft-library/2', "Native export did not produce library v2")
+    p.require(catalog.get('id') == PACK_ID, "Wrong native library identity")
+    entries = catalog.get('entries')
+    p.require(isinstance(entries, list) and len(entries) == len(plan['materials']), "Missing or extra native materials")
+    expected = {row['command']['params']['name']: row['command']['params'] for row in plan['materials']}
+    found = set()
+    for entry in entries:
+        p.require(isinstance(entry, dict), "Invalid native entry")
+        definition = entry.get('definition', {})
+        p.require(isinstance(definition, dict) and definition.get('kind') == 'material', "Unexpected appearance entry")
+        value = definition.get('value', {})
+        p.require(isinstance(value, dict), "Invalid material definition")
+        name = value.get('name')
+        p.require(name in expected and name not in found, "Unknown or duplicate exported material")
+        found.add(name)
+        reference = expected[name]
+        p.require(value.get('density_g_cm3') == reference['density_g_cm3'], "Assigned reference density changed")
+        p.require(value.get('physical_card') == reference['physical_card'], "A physical card, source or condition was changed or dropped")
+        p.require(value.get('appearance') is None, "Physical export must not assign a visual appearance")
+        revision = entry.get('revision', '')
+        p.require(isinstance(revision, str) and len(revision) == 64 and all(c in '0123456789abcdef' for c in revision), "Invalid native revision")
+    # Revisions are subsequently verified by the real library.inspect command,
+    # not a parallel Python approximation of serde's ordering/float formatting.
+
+
+def library_command(path: Path) -> dict:
+    return {'command': 'library.export', 'params': {
+        'path': str(path), 'id': PACK_ID, 'name': 'Physical references - select grade and conditions',
+        'format': 'solidcraft-library/2', 'overwrite': False,
+        'provenance': {'license': 'MIT OR Apache-2.0', 'author': 'SolidCraft contributors',
+                       'source_url': 'https://github.com/0xlillith/solidcraft/tree/assets/material-physical-properties/assets/render/physical'}}}
+
+
+def export(cli: Path, plan: dict) -> dict:
+    cli = cli.resolve(strict=True)
+    p.require(cli.is_file(), "Trusted CLI executable not found")
+    p.require(plan.get("input_sha256") == input_pins(), "Stale physical reference plan")
+    registry_check(invoke(cli, ['commands']))
+    # No live app, existing document, source profile, output file or library is touched.
+    stamp = datetime.now(timezone.utc).strftime('%Y%m%dT%H%M%S.%fZ')
+    folder = p.ROOT / 'target/physical-library-exports' / stamp
+    p.require(not folder.exists(), "Review output already exists")
+    folder.mkdir(parents=True, exist_ok=False)
+    output, cold = folder/'physical-reference-library.json', folder/'cold-reopened-library.json'
+    design = folder/'physical-reference-library-design.json'
+    script = folder/'create.json'
+    commands = [{'command': 'file.new', 'params': {'name': 'Physical reference library'}}]
+    commands += [row['command'] for row in plan['materials']]
+    commands.append(library_command(output))
+    script.write_bytes(p.encoded({'commands': commands}))
+    before = input_pins()
+    p.require(before == plan['input_sha256'], 'Source changed after native preflight')
+    invoke(cli, ['run', str(script), '--results', '--save', str(design)])
+    catalog = p.read(output)
+    verify_catalog(catalog, plan)
+    inspected = invoke(cli, ['exec', 'library.inspect', json.dumps({'path': str(output)})])
+    p.require(isinstance(inspected, dict) and inspected.get('catalog') == catalog, "Native library inspection disagrees with its export")
+    # New process, cold document load and native re-export must preserve every card.
+    reopen = folder/'reopen.json'
+    reopen.write_bytes(p.encoded({'commands': [library_command(cold)]}))
+    invoke(cli, ['run', str(reopen), '--in', str(design), '--results'])
+    restored = p.read(cold)
+    verify_catalog(restored, plan)
+    p.require(restored == catalog, "Cold reopen changed the native material library")
+    p.require(before == input_pins(), "Source revision changed during library export")
+    receipt = {'schema': 'solidcraft-physical-library-export-receipt/1', 'status': 'pass',
+               'cli_sha256': p.sha(cli), 'input_sha256': before, 'library_sha256': p.sha(output),
+               'material_count': len(plan['materials']), 'omitted': plan['omitted'],
+               'native_inspection': True, 'cold_reopen': True, 'body_assignment': False,
+               'engineering_certification': False, 'extended_data_embedded': False,
+               'library': str(output.relative_to(p.ROOT))}
+    (folder/'receipt.json').write_bytes(p.encoded(receipt))
+    return receipt
+
+
+def main() -> int:
+    parser = argparse.ArgumentParser(description=__doc__)
+    parser.add_argument('--profile', action='append', help='Exact reference ID; default selects all point-density references')
+    parser.add_argument('--acknowledge-reference', action='store_true')
+    parser.add_argument('--cli', type=Path, help='Trusted card-capable executable; absent means a non-executing JSON plan only')
+    args = parser.parse_args()
+    try:
+        plan = selection(args.profile, args.acknowledge_reference)
+        result = export(args.cli, plan) if args.cli else plan
+        print(json.dumps(result, indent=2, ensure_ascii=True, allow_nan=False))
+        return 0
+    except (OSError, ValueError, KeyError, TypeError, subprocess.SubprocessError) as error:
+        print(json.dumps({'status': 'fail', 'error': str(error)}), file=sys.stderr)
+        return 1
+
+
+if __name__ == '__main__':
+    raise SystemExit(main())

assets/render/physical/tools/physical.py

@@ -0,0 +1,348 @@
+#!/usr/bin/env python3
+"""Validate physical references and prepare non-executing schema-1 material cards.
+
+JSON masters retain provenance, directional data, limits and unsupported quantities.
+No CAD document is opened, no body is assigned and no missing constant is invented.
+"""
+from __future__ import annotations
+import argparse
+from collections import Counter
+import hashlib
+import json
+import math
+from pathlib import Path
+import re
+import sys
+
+ROOT = Path(__file__).resolve().parents[4]
+PACK = ROOT / 'assets/render/physical'
+MAX_BYTES = 8 * 1024 * 1024
+ID = re.compile(r'[a-z][a-z0-9-]{0,63}\Z')
+CORE = {'density','elasticity','tensile_strength','yield_strength','compressive_strength','shear_strength','thermal_conductivity','thermal_expansion','specific_heat'}
+PRESSURE = {'young_modulus','shear_modulus','tensile_strength','yield_strength','compressive_strength','shear_strength','flexural_strength','flexural_modulus','compressive_modulus','stress_at_strain','internal_bond_strength'}
+TEMPERATURE = {'glass_transition','melting_temperature','heat_deflection','service_temperature','decomposition_temperature'}
+DIMENSIONLESS = {'poisson_ratio','elongation_break','relative_permittivity','loss_tangent','water_absorption','hardness_shore_a','hardness_shore_d','hardness_brinell','hardness_knoop','specific_gravity','electrical_conductivity_iacs','refractive_index','porosity','void_ratio','thermal_emittance','solar_absorptance','thickness_swelling'}
+CONVERSIONS = {
+ 'kg/m^3':('density',1.,0.), 'g/cm^3':('density',1000.,0.), 'lb/in^3':('density',27679.904710203,0.),
+ 'Pa':('pressure',1.,0.), 'kPa':('pressure',1e3,0.), 'MPa':('pressure',1e6,0.), 'GPa':('pressure',1e9,0.),
+ 'psi':('pressure',6894.757293168,0.), 'ksi':('pressure',6894757.293168,0.),
+ '1':('ratio',1.,0.), '%':('ratio',.01,0.), 'W/(m K)':('conductivity',1.,0.),
+ 'Btu/(h ft degF)':('conductivity',1.730734666371,0.), '1/K':('expansion',1.,0.),
+ 'ppm/K':('expansion',1e-6,0.), '1/degF':('expansion',1.8,0.),
+ 'J/(kg K)':('heat',1.,0.), 'J/(g K)':('heat',1000.,0.), 'Btu/(lb degF)':('heat',4186.8,0.),
+ 'K':('temperature',1.,0.), 'degC':('temperature',1.,273.15), 'degF':('temperature',5/9,255.3722222222222),
+ 'ohm m':('resistivity',1.,0.), 'ohm cm':('resistivity',.01,0.), 'microohm cm':('resistivity',1e-8,0.), 'ohm mm^2/m':('resistivity',1e-6,0.),
+ 'V/m':('field',1.,0.), 'kV/mm':('field',1e6,0.), 'V/mil':('field',1/.0000254,0.),
+ 'N':('force',1.,0.), 'N/m':('tear',1.,0.), 'pli':('tear',175.1268352465,0.),
+ 'Pa sqrt(m)':('toughness',1.,0.), 'MPa sqrt(m)':('toughness',1e6,0.),
+ 'm':('length',1.,0.), 'micrometre':('length',1e-6,0.), 'mil':('length',.0000254,0.),
+ 'rad':('angle',1.,0.), 'degree':('angle',math.pi/180,0.)}
+QUANTITY = {q:('pressure','Pa') for q in PRESSURE}
+QUANTITY.update({q:('temperature','K') for q in TEMPERATURE})
+QUANTITY.update({q:('ratio','1') for q in DIMENSIONLESS})
+QUANTITY.update({'density':('density','kg/m^3'),'grain_density':('density','kg/m^3'),
+ 'thermal_conductivity':('conductivity','W/(m K)'), 'thermal_expansion':('expansion','1/K'),
+ 'specific_heat':('heat','J/(kg K)'), 'volume_resistivity':('resistivity','ohm m'),
+ 'dielectric_strength':('field','V/m'), 'hardness_janka':('force','N'), 'tear_strength':('tear','N/m'),
+ 'fracture_toughness':('toughness','Pa sqrt(m)'), 'mean_particle_size':('length','m'),
+ 'dry_film_thickness':('length','m'), 'angle_of_repose':('angle','rad')})
+
+class Invalid(ValueError):
+    """A physical reference violates the reviewed contract."""
+
+def require(ok, message):
+    if not ok: raise Invalid(message)
+
+def unique(pairs):
+    out = {}
+    for key, value in pairs:
+        require(key not in out, f'duplicate JSON field: {key}')
+        out[key] = value
+    return out
+
+def reject_constant(value):
+    raise Invalid(f'non-finite JSON constant: {value}')
+
+def read(path):
+    require(path.is_file() and not path.is_symlink(), f'expected regular input: {path.name}')
+    require(path.stat().st_size <= MAX_BYTES, f'oversized input: {path.name}')
+    raw = path.read_bytes();require(len(raw) <= MAX_BYTES, 'input grew beyond byte budget')
+    data = json.loads(raw, object_pairs_hook=unique, parse_constant=reject_constant)
+    require(isinstance(data, dict), 'expected JSON object')
+    return data
+
+def text(value, label, limit=2048):
+    require(isinstance(value,str) and 0 < len(value.encode('utf-8')) <= limit and not any(ord(c)<32 for c in value), f'invalid {label}')
+
+def number(value, low=-1e30, high=1e30):
+    require(type(value) in (int,float) and low <= value <= high and math.isfinite(value), 'invalid bounded number')
+    return float(value)
+
+def close(a,b):
+    return math.isclose(a,b,rel_tol=2e-11,abs_tol=1e-14*max(abs(b),1e-20))
+
+def sha(path):
+    return hashlib.sha256(path.read_bytes()).hexdigest()
+
+def encoded(value):
+    return (json.dumps(value,ensure_ascii=True,indent=2,allow_nan=False)+'\n').encode()
+
+def check_conditions(c):
+    base={'temperature_k','temperature_interval_k','moisture_dry_basis_kg_kg','strain_rate_per_s','state','direction','test_method'}
+    numeric={'crosshead_speed_mm_min','frequency_hz','specimen_thickness_mm','engineering_strain','heating_rate_k_min',
+             'test_stress_pa','wavelength_nm','minimum_film_thickness_m','immersion_hours','specimen_mass_kg'}
+    strings={'environment','thermal_regime','density_basis','excitation'}
+    require(isinstance(c,dict) and base<=set(c)<=base|numeric|strings|{'lower_thickness_exclusive','thickness_range_mm'},'unknown or missing condition field')
+    for key in numeric & set(c): number(c[key],0,1e18)
+    for key in strings & set(c): text(c[key],key,256)
+    if 'lower_thickness_exclusive' in c: require(type(c['lower_thickness_exclusive']) is bool,'thickness endpoint flag must be Boolean')
+    if 'thickness_range_mm' in c:
+        bounds=c['thickness_range_mm']
+        require(isinstance(bounds,list) and len(bounds)==2 and 0<number(bounds[0])<number(bounds[1]),'invalid specimen thickness range')
+    if c['temperature_k'] is not None: number(c['temperature_k'],1e-20,20000)
+
+def check_property(p, sources):
+    require(isinstance(p,dict),'property must be an object')
+    required={'id','quantity','value','unit','qualifier','source_id','source_locator','original','conditions','note','uncertainty'}
+    require(required <= set(p) <= required|{'derivation'},'unknown or missing property fields')
+    text(p['id'],'property ID',128)
+    q=p['quantity'];require(q in QUANTITY and p['unit']==QUANTITY[q][1],'unknown quantity or wrong SI unit')
+    require(p['source_id'] in sources,'unresolved property source');text(p['source_locator'],'source locator')
+    require(p['qualifier'] in {'typical','reported_range','lower_bound','upper_bound','derived'},'invalid qualifier')
+    orig=p['original'];require(isinstance(orig,dict) and set(orig)=={'value','unit','scale_to_si','offset_to_si'},'invalid original quantity')
+    require(orig['unit'] in CONVERSIONS,'unknown source unit')
+    dim,scale,offset=CONVERSIONS[orig['unit']]
+    require(dim==QUANTITY[q][0],'source quantity has incompatible dimensions')
+    require(number(orig['scale_to_si'])==scale and number(orig['offset_to_si'])==offset,'conversion recipe altered')
+    value,raw=p['value'],orig['value'];is_range=isinstance(value,list)
+    require(is_range==isinstance(raw,list),'range/scalar mismatch')
+    if is_range:
+        require(len(value)==len(raw)==2 and p['qualifier']=='reported_range','range needs two endpoints and range qualifier')
+        require(number(value[0])<=number(value[1]),'reversed range')
+    else: require(p['qualifier']!='reported_range','scalar cannot claim range')
+    for v,r in zip(value if is_range else [value],raw if is_range else [raw]):
+        v,r=number(v),number(r);require(close(v,r*scale+offset),'SI value does not reproduce cited original')
+        if q not in {'thermal_expansion','poisson_ratio'}: require(v>=0,'negative physical value')
+        if q in TEMPERATURE|{'density','grain_density','young_modulus','shear_modulus','specific_heat','thermal_conductivity','relative_permittivity','refractive_index'}:require(v>0,'positive physical quantity required')
+        if q in {'porosity','thermal_emittance','solar_absorptance'}:require(v<=1,'fraction above one')
+        if q.startswith('hardness_shore_'):require(v<=100,'Shore hardness above 100')
+    c=p['conditions'];check_conditions(c)
+    for key in ['temperature_k','moisture_dry_basis_kg_kg','strain_rate_per_s']:
+        require(key in c,'condition field must be explicit even when unknown')
+        if c[key] is not None:number(c[key],0,1e12)
+    if c.get('temperature_interval_k') is not None:
+        interval=c['temperature_interval_k'];require(isinstance(interval,list) and len(interval)==2,'temperature interval shape')
+        require(0<number(interval[0])<=number(interval[1])<=20000,'temperature interval bounds')
+    for key in ('state','direction','test_method'):text(c.get(key),key,1024)
+    if p['uncertainty'] is not None:
+        u=p['uncertainty'];require(isinstance(u,dict) and set(u)=={'reported_plus_minus','interpretation'},'invalid uncertainty')
+        number(u['reported_plus_minus'],0);text(u['interpretation'],'uncertainty interpretation')
+    require((p['qualifier']=='derived')==('derivation' in p),'derived value needs a calculation receipt')
+
+def check_derivation(record, properties):
+    d=record['derivation'];require(isinstance(d,dict),'invalid derivation')
+    require(all(key in properties for key in d.get('input_property_ids',[])),'missing derivation input')
+    if d.get('formula')=='young_modulus/(2*shear_modulus)-1':
+        require(record['quantity']=='poisson_ratio','wrong modulus-derived quantity')
+        e,g=properties['young_modulus'],properties['shear_modulus']
+        require(e['source_id']==g['source_id']==record['source_id'],'mixed-source elastic derivation')
+        expected=number(e['value'])/(2*number(g['value'],1e-30))-1
+        require(-1<expected<.5 and close(record['value'],expected),'incorrect derived Poisson ratio')
+    elif d.get('formula')=='specific_gravity*1000*(1+moisture_dry_basis_kg_kg)':
+        require(record['quantity']=='density','wrong moisture-derived quantity')
+        moisture=number(d.get('moisture_dry_basis_kg_kg'),0,100)
+        require(d.get('water_reference_density_kg_m3')==1000 and record['conditions']['moisture_dry_basis_kg_kg']==moisture,'moisture-density conditions mismatch')
+        expected=number(properties['specific_gravity']['value'])*1000*(1+moisture)
+        require(close(record['value'],expected),'incorrect moisture-derived density')
+    else:raise Invalid('unreviewed derivation formula')
+
+def validate_data(data, source_data, binding, registry, root=ROOT):
+    require(data.get('schema')=='solidcraft-physical-reference-profiles/1' and data.get('runtime_assignment') is False,'unknown profile schema or false runtime claim')
+    require(source_data.get('schema')=='solidcraft-physical-sources/1','unknown source schema')
+    require(binding.get('schema')=='solidcraft-physical-bindings/1','unknown binding schema')
+    require(registry.get('units')=={q:u for q,(_,u) in QUANTITY.items()},'quantity registry changed without validator review')
+    require(registry.get('conversions')=={k:{'scale':v[1],'offset':v[2]} for k,v in CONVERSIONS.items()},'unit conversion registry drift')
+    require(isinstance(source_data.get('sources'),list) and 1<=len(source_data['sources'])<=256,'source count')
+    sources={}
+    for s in source_data['sources']:
+        require(isinstance(s,dict) and isinstance(s.get('id'),str) and ID.fullmatch(s['id']) is not None and s['id'] not in sources,'invalid/duplicate source')
+        text(s.get('title'),'source title',256);text(s.get('url'),'source URL')
+        require(s['url'].startswith('https://') and s.get('kind')=='public_reference','source must identify public HTTPS reference')
+        require(s.get('license') is None or isinstance(s['license'],str),'invalid source rights metadata')
+        sources[s['id']]=s
+    profiles={};require(isinstance(data.get('profiles'),list) and 1<=len(data['profiles'])<=256,'profile count')
+    for p in data['profiles']:
+        require(isinstance(p,dict) and isinstance(p.get('id'),str) and ID.fullmatch(p['id']) is not None and p['id'] not in profiles,'invalid/duplicate profile')
+        require(p.get('family') in {'wood','polymer','glass','metal','other'},'unknown native material family')
+        require(p.get('source_id') in sources and p.get('certified_design_allowables') is False,'invalid provenance or false certification')
+        require(type(p.get('isotropic_reference_model')) is bool,'isotropic policy must be Boolean')
+        text(p.get('designation'),'designation',256);text(p.get('reference_state'),'state',800)
+        allowed={'id','designation','family','material_form','reference_state','identity_status','isotropic_reference_model','source_id','properties','limitations','certified_design_allowables','quarantined_source_ids'}
+        require(set(p)<=allowed,'unknown profile field')
+        require(all(x in sources for x in p.get('quarantined_source_ids',[])),'unresolved quarantined source')
+        require(isinstance(p.get('properties'),list) and len(p['properties'])<=128,'property list bounds')
+        seen={}
+        for r in p['properties']:
+            check_property(r,sources);require(r['id'] not in seen,'duplicate property ID');seen[r['id']]=r
+        for r in seen.values():
+            if r['qualifier']=='derived':check_derivation(r,seen)
+        profiles[p['id']]=p
+    expected={'catalog':('docs/render-materials/materials.json',600),'surfaces':('assets/render/starter/materials/manifest.json',48)}
+    authorities={}
+    for key,(path,count) in expected.items():
+        spec=binding.get('inputs',{}).get(key,{})
+        require(spec.get('path')==path and type(spec.get('count')) is int and spec['count']==count,'authority path/count mismatch')
+        require(spec.get('sha256')==sha(root/path),'catalog changed: explicit binding review required')
+        authorities[key]=read(root/path)['items'];require(len(authorities[key])==count,'authority count mismatch')
+    concepts={c['id']:c for c in authorities['catalog']}
+    require(len(binding.get('catalog',[]))==600 and len(binding.get('surfaces',[]))==48,'all concepts/surfaces need physical specifications')
+    checked={}
+    for b in binding['catalog']:
+        id=b.get('catalog_id');require(id in concepts and id not in checked and b.get('name')==concepts[id]['name'],'invalid/duplicate concept binding')
+        require(b.get('auto_assign_body') is False and b.get('preserve_existing_material') is True and b.get('unknown_is_zero') is False,'appearance must not overwrite host physics')
+        require(b.get('physical_role') in binding.get('role_definitions',{}),'unknown physical role')
+        require(isinstance(b.get('required_definition_fields'),list) and len(b['required_definition_fields'])>0,'physical requirements cannot be empty')
+        refs=b.get('references');require(isinstance(refs,list) and len(refs)<=16,'reference list bounds');pairs=set()
+        for ref in refs:
+            require(ref.get('profile_id') in profiles,'unresolved physical reference');text(ref.get('relation'),'reference relationship',256)
+            pair=(ref['profile_id'],ref['relation']);require(pair not in pairs,'duplicate reference');pairs.add(pair)
+        require(b.get('status')==('reference_selection_required' if refs else 'specific_recipe_required'),'status conflicts with references')
+        checked[id]=b
+    surface_ids=set();originals={s['id']:s for s in authorities['surfaces']}
+    for s in binding['surfaces']:
+        id=s.get('surface_id');require(id in originals and id not in surface_ids,'invalid surface ID');original=originals[id]
+        require(s.get('catalog_ids')==original['catalog_ids']==s.get('physical_binding_ids'),'surface physical association drift')
+        require(s.get('name')==original['name'] and s.get('auto_assign_body') is False and s.get('preserve_existing_material') is True,'surface scope/name mismatch')
+        first=checked[original['catalog_ids'][0]]
+        require(s.get('status')==first['status'] and s.get('physical_role')==first['physical_role'],'surface status/role drift');surface_ids.add(id)
+    return profiles,sources
+
+def load():
+    data,sources,binding,registry=[read(PACK/name) for name in ('profiles.json','sources.json','bindings.json','quantities.json')]
+    profiles,source_map=validate_data(data,sources,binding,registry)
+    return profiles,source_map,binding
+
+def native_condition(p,r):
+    c=r['conditions'];extra={k:v for k,v in c.items() if k not in {'state','temperature_k','moisture_dry_basis_kg_kg','strain_rate_per_s'} and v is not None}
+    state=c['state']+' | '+r['qualifier']+' reference; source review required; not design allowables.'
+    if extra:state+=' | '+json.dumps(extra,sort_keys=True,separators=(',',':'))
+    if r['uncertainty'] is not None:state+=' | Reported uncertainty retained in extended profile.'
+    if r['qualifier']=='derived':state+=' | Derived value; formula retained in extended profile.'
+    require(len(state.encode())<=1024,'native condition overflow')
+    return {k:c[k] for k in ('temperature_k','moisture_dry_basis_kg_kg','strain_rate_per_s')}|{'state':state}
+
+def native_card(p,sources):
+    selected=[];used=set();properties=p['properties'];by_q={}
+    for r in properties:by_q.setdefault(r['quantity'],[]).append(r)
+    def point(q):
+        rows=by_q.get(q,[])
+        if len(rows)!=1:return None
+        r=rows[0]
+        return r if type(r['value']) in (int,float) and r['qualifier'] in {'typical','derived'} and r['conditions']['direction'] in {'not_reported','isotropic'} else None
+    def add(r,data,extra=()):
+        selected.append({'data':data,'source_id':r['source_id'],'conditions':native_condition(p,r)})
+        used.add(r['id']);used.update(extra)
+    rho=point('density')
+    if rho:add(rho,{'kind':'density','kg_m3':rho['value']})
+    cp=point('specific_heat')
+    if cp:add(cp,{'kind':'specific_heat','j_kg_k':cp['value']})
+    for q in ('tensile_strength','yield_strength','compressive_strength','shear_strength'):
+        r=point(q)
+        if r:add(r,{'kind':q,'pa':r['value']})
+    if p['isotropic_reference_model']:
+        e,nu=point('young_modulus'),point('poisson_ratio')
+        if e and nu:
+            keys=('temperature_k','temperature_interval_k','moisture_dry_basis_kg_kg','strain_rate_per_s','state','direction','environment','thermal_regime','specimen_thickness_mm','heating_rate_k_min')
+            require(e['source_id']==nu['source_id'] and all(e['conditions'].get(k)==nu['conditions'].get(k) for k in keys),'mixed elastic source/conditions')
+            require(-1<number(nu['value'])<.5,'unstable isotropic Poisson ratio')
+            add(e,{'kind':'elasticity','model':{'symmetry':'isotropic','young_modulus_pa':e['value'],'poisson_ratio':nu['value']}},[nu['id']])
+            selected[-1]['conditions']['state']+=' | Isotropic reference model; not validated part behavior.'
+            if nu['qualifier']=='derived':selected[-1]['conditions']['state']+=' Poisson ratio derived from same-source E and G, not independently measured.'
+        for q,field in [('thermal_conductivity','w_m_k'),('thermal_expansion','per_k')]:
+            r=point(q)
+            if r:
+                add(r,{'kind':q,field:[r['value']]*3,'axes':'material123'})
+                selected[-1]['conditions']['state']+=' | Isotropic reference approximation, not measured directional tensor.'
+    selected.sort(key=lambda r:r['data']['kind']);source_ids=sorted({r['source_id'] for r in selected} or {p['source_id']})
+    card={'schema_version':1,'designation':p['designation'],'family':p['family'],
+          'sources':[{'id':id,'title':sources[id]['title'],'kind':'public_reference','license':sources[id]['license'],'reference':sources[id]['url']} for id in source_ids],
+          'properties':selected}
+    return {'profile_id':p['id'],'card':card,
+            'native_projection_status':'partial_native_card' if selected else 'extended_data_only',
+            'exported_property_ids':sorted(used),
+            'not_projected':[{'id':r['id'],'quantity':r['quantity'],'reason':'Retained in extended profile: unsupported native quantity, range/bound, directional measurement or incomplete constitutive model.'} for r in properties if r['id'] not in used],
+            'missing_native_kinds':sorted(CORE-{r['data']['kind'] for r in selected}),
+            'reference_selection_required':True,'runtime_assignment':False}
+
+def make_exports():
+    profiles,sources,bindings=load();cards=[native_card(p,sources) for p in profiles.values()]
+    pin={name:sha(PACK/name) for name in ('sources.json','profiles.json','quantities.json','bindings.json')}
+    data={'schema':'solidcraft-physical-card-bundle/1','native_card_schema':1,'native_library_format':False,
+          'source_sha256':pin,'generator_sha256':sha(Path(__file__)),'runtime_assignment':False,'items':cards}
+    coverage={'schema':'solidcraft-physical-coverage/1','profile_count':len(profiles),'source_count':len(sources),
+              'property_records':sum(len(p['properties']) for p in profiles.values()),'catalog_specifications':len(bindings['catalog']),
+              'concepts_with_reference_candidates':sum(bool(c['references']) for c in bindings['catalog']),
+              'concepts_needing_specific_recipe':sum(not c['references'] for c in bindings['catalog']),
+              'surface_specifications':len(bindings['surfaces']),
+              'surfaces_with_reference_candidates':sum(s['status']=='reference_selection_required' for s in bindings['surfaces']),
+              'native_property_blocks':sum(len(c['card']['properties']) for c in cards),
+              'nonempty_native_cards':sum(bool(c['card']['properties']) for c in cards),
+              'extended_only_profiles':sum(not c['card']['properties'] for c in cards),
+              'profiles_with_point_density':sum(any(r['data']['kind']=='density' for r in c['card']['properties']) for c in cards),
+              'quantities':dict(sorted(Counter(r['quantity'] for p in profiles.values() for r in p['properties']).items())),
+              'runtime_assignment':False,'numerically_complete_catalog_claim':False}
+    return {'native-cards.json':data,'coverage.json':coverage}
+
+def build():
+    outputs=make_exports();folder=PACK/'exports';folder.mkdir(exist_ok=True)
+    for name,data in outputs.items():
+        path=folder/name;require(not path.is_symlink(),'refusing symlink export');path.write_bytes(encoded(data))
+    return outputs['coverage.json']
+
+def validate():
+    outputs=make_exports()
+    for name,data in outputs.items():
+        path=PACK/'exports'/name
+        require(path.is_file() and not path.is_symlink() and path.read_bytes()==encoded(data),f'stale export: {name}; review source changes before rebuilding')
+    return {'status':'pass',**outputs['coverage.json']}
+
+def resolve(id):
+    profiles,_,binding=load()
+    if id.startswith('SURF-'):
+        row=next((s for s in binding['surfaces'] if s['surface_id']==id),None)
+        require(row is not None,'unknown surface ID');id=row['catalog_ids'][0]
+    row=next((c for c in binding['catalog'] if c['catalog_id']==id),None)
+    require(row is not None,'unknown catalog ID')
+    return {'binding':row,'profiles':[profiles[r['profile_id']] for r in row['references']],'runtime_assignment':False}
+
+def prepare(id,acknowledge):
+    require(acknowledge,'--acknowledge-reference is required; these are not certified design allowables')
+    profiles,sources,_=load();require(id in profiles,'unknown reference profile')
+    p=profiles[id];result=native_card(p,sources)
+    densities=[v for v in result['card']['properties'] if v['data']['kind']=='density']
+    require(len(densities)==1,'no single supported density; select a reviewed point value/grade before material creation')
+    name='REF '+p['designation'];require(len(name.encode())<=128,'material name too long')
+    return {'schema':'solidcraft-physical-command-plan/1',
+            'requires':['material.create must explicitly support physical_card; refuse older command contracts',
+                        'review grade, form, temperature, moisture, process and density basis before execution',
+                        'body assignment is a separate explicit operation; preserve existing appearances'],
+            'executed':False,'assigns_bodies':False,'profile_id':id,
+            'commands':[{'command':'material.create','params':{'name':name,'density_g_cm3':densities[0]['data']['kg_m3']/1000,'physical_card':result['card']}}],
+            'extended_profile':'assets/render/physical/profiles.json#'+id,'limitations':p['limitations'],
+            'omitted_native_properties':result['not_projected']}
+
+def main():
+    parser=argparse.ArgumentParser(description=__doc__)
+    parser.add_argument('command',choices=['build','validate','resolve','prepare']);parser.add_argument('id',nargs='?')
+    parser.add_argument('--acknowledge-reference',action='store_true');args=parser.parse_args()
+    try:
+        if args.command=='build':result=build()
+        elif args.command=='validate':result=validate()
+        elif args.command=='resolve':result=resolve(args.id or '')
+        else:result=prepare(args.id or '',args.acknowledge_reference)
+        print(json.dumps(result,ensure_ascii=True,indent=2,allow_nan=False));return 0
+    except (ValueError,OSError,TypeError,KeyError,AttributeError,RecursionError) as error:
+        print(json.dumps({'status':'fail','error':str(error)}),file=sys.stderr);return 1
+
+if __name__=='__main__':
+    raise SystemExit(main())

assets/render/physical/tools/test_export_library.py

@@ -0,0 +1,121 @@
+"""Regression checks for explicit, no-loss physical-library export planning."""
+import copy
+from pathlib import Path
+import tempfile
+import unittest
+from unittest.mock import patch
+
+import export_library as e
+import physical as p
+
+
+def modern_registry():
+    rows = [{'id': name, 'params': ''} for name in ('file.new', 'material.create', 'material.inspect', 'library.export', 'library.inspect')]
+    rows[1]['params'] = 'physical_card: schema 1'
+    rows[3]['params'] = 'format solidcraft-library/2'
+    return rows
+
+
+def projected_catalog(plan):
+    entries = []
+    for i, row in enumerate(plan['materials']):
+        params = row['command']['params']
+        entries.append({'id': e.PACK_ID + '/material-' + str(i), 'revision': 'a'*64,
+                        'definition': {'kind': 'material', 'value': copy.deepcopy(params)}})
+    return {'format': 'solidcraft-library/2', 'id': e.PACK_ID, 'entries': entries}
+
+
+class ExportLibraryTests(unittest.TestCase):
+    @classmethod
+    def setUpClass(cls):
+        cls.plan = e.selection(None, True)
+
+    def test_plan_covers_every_point_density_without_part_assignment(self):
+        self.assertEqual(len(self.plan['materials']), 46)
+        self.assertEqual(len(self.plan['omitted']), 13)
+        self.assertFalse(self.plan['assigns_bodies'])
+        self.assertFalse(self.plan['executed'])
+        self.assertTrue(self.plan['preserve_extended_profiles'])
+        ids = {x['profile_id'] for x in self.plan['materials']}
+        omitted = {x['profile_id'] for x in self.plan['omitted']}
+        self.assertFalse(ids & omitted)
+        self.assertEqual(len(ids | omitted), 59)
+        for row in self.plan['materials']:
+            self.assertEqual(row['command']['command'], 'material.create')
+            self.assertEqual(set(row['command']['params']), {'name', 'density_g_cm3', 'physical_card'})
+
+    def test_acknowledgement_unknown_duplicate_and_empty_selections_refuse(self):
+        for ids, acknowledge in [(None, False), ([], True), (['unknown'], True), (['steel-c45']*2, True)]:
+            with self.subTest(ids=ids), self.assertRaises(p.Invalid):
+                e.selection(ids, acknowledge)
+
+    def test_ranges_and_coatings_without_density_are_not_assigned(self):
+        omitted = {x['profile_id'] for x in self.plan['omitted']}
+        self.assertTrue({'c71-enamel', 'hmg-stoving-hammer', 'hmg-sc601-clear', 'uv22-coating'} <= omitted)
+        with self.assertRaises(p.Invalid):
+            e.selection(['c71-enamel'], True)
+        plan = e.selection(['pmma-goodfellow-sheet'], True)
+        params = plan['materials'][0]['command']['params']
+        self.assertAlmostEqual(params['density_g_cm3'], 1.19)
+        self.assertNotIn('elasticity', {r['data']['kind'] for r in params['physical_card']['properties']})
+
+    def test_old_scalar_registry_refuses_and_modern_contract_is_recognized(self):
+        e.registry_check(modern_registry())
+        for field, replacement in [(1, 'density and colour only'), (3, 'scalar library/1')]:
+            rows = modern_registry()
+            rows[field]['params'] = replacement
+            with self.assertRaises(p.Invalid):
+                e.registry_check(rows)
+        for value in [None, {}, [None], modern_registry()+[modern_registry()[0]]]:
+            with self.subTest(value=value), self.assertRaises(p.Invalid):
+                e.registry_check(value)
+
+    def test_catalog_retains_every_native_value_source_and_condition(self):
+        catalog = projected_catalog(self.plan)
+        e.verify_catalog(catalog, self.plan)
+        for mutation in ('drop_card', 'density', 'appearance', 'source', 'state', 'revision', 'duplicate', 'missing'):
+            value = copy.deepcopy(catalog)
+            material = value['entries'][0]['definition']['value']
+            if mutation == 'drop_card':material.pop('physical_card')
+            elif mutation == 'density':material['density_g_cm3'] *= 2
+            elif mutation == 'appearance':material['appearance'] = {'name': 'unrequested optical change'}
+            elif mutation == 'source':material['physical_card']['sources'][0]['reference'] = 'changed'
+            elif mutation == 'state':material['physical_card']['properties'][0]['conditions']['state'] = 'wrong condition'
+            elif mutation == 'revision':value['entries'][0]['revision'] = 'not a revision'
+            elif mutation == 'duplicate':value['entries'][1] = copy.deepcopy(value['entries'][0])
+            elif mutation == 'missing':value['entries'].pop()
+            with self.subTest(mutation=mutation), self.assertRaises(p.Invalid):
+                e.verify_catalog(value, self.plan)
+
+    def test_legacy_refusal_does_not_create_output_or_run_mutations(self):
+        rows = modern_registry()
+        rows[1]['params'] = 'no card persistence'
+        with tempfile.TemporaryDirectory() as temporary:
+            root = Path(temporary)
+            cli = root/'trusted-cli-fixture'
+            cli.write_bytes(b'unit test marker; not executable')
+            with patch.object(p, 'ROOT', root), patch.object(e, 'invoke', return_value=rows) as invoke:
+                with self.assertRaises(p.Invalid):e.export(cli, self.plan)
+                invoke.assert_called_once_with(cli.resolve(), ['commands'])
+                self.assertFalse((root/'target').exists())
+
+    def test_stale_plan_refuses_before_executable_invocation(self):
+        plan = copy.deepcopy(self.plan)
+        plan['input_sha256']['profiles.json'] = '0'*64
+        with tempfile.TemporaryDirectory() as temporary:
+            cli = Path(temporary)/'fixture'
+            cli.write_bytes(b'fixture')
+            with patch.object(e, 'invoke') as invoke:
+                with self.assertRaises(p.Invalid):e.export(cli, plan)
+                invoke.assert_not_called()
+
+    def test_library_command_has_no_overwrite_and_no_body_targets(self):
+        command = e.library_command(Path('review.json'))
+        self.assertEqual(command['command'], 'library.export')
+        self.assertEqual(command['params']['format'], 'solidcraft-library/2')
+        self.assertIs(command['params']['overwrite'], False)
+        self.assertNotIn('targets', command['params'])
+
+
+if __name__ == '__main__':
+    unittest.main()

assets/render/physical/tools/test_physical.py

@@ -0,0 +1,277 @@
+"""Regression tests for reference data, physical scope and loss-aware projection."""
+import copy
+import json
+import math
+from pathlib import Path
+import tempfile
+import unittest
+
+import physical as p
+
+class PhysicalTests(unittest.TestCase):
+    @classmethod
+    def setUpClass(cls):
+        cls.data,cls.sources,cls.bindings,cls.registry=[p.read(p.PACK/name) for name in ('profiles.json','sources.json','bindings.json','quantities.json')]
+        cls.profiles,cls.source_map=p.validate_data(cls.data,cls.sources,cls.bindings,cls.registry)
+
+    def mutated(self,which,change):
+        args=copy.deepcopy([self.data,self.sources,self.bindings,self.registry]);change(args[which])
+        with self.assertRaises((p.Invalid,KeyError,TypeError)):p.validate_data(*args)
+
+    def row(self,id,quantity):
+        return next(x for x in self.profiles[id]['properties'] if x['quantity']==quantity)
+
+    def test_all_profiles_and_associations_validate(self):
+        self.assertGreaterEqual(len(self.profiles),51)
+        self.assertEqual(len(self.bindings['catalog']),600)
+        self.assertEqual(len(self.bindings['surfaces']),48)
+
+    def test_duplicate_json_fields_and_nonfinite_literals_refuse(self):
+        with self.assertRaises(p.Invalid):json.loads('{"density":1,"density":2}',object_pairs_hook=p.unique)
+        for value in ('NaN','Infinity','-Infinity'):
+            with self.assertRaises(p.Invalid):json.loads('{"value":'+value+'}',parse_constant=p.reject_constant)
+
+    def test_numeric_boolean_text_infinity_and_huge_integers_refuse(self):
+        for v in (True,False,'1',float('nan'),float('inf'),10**400,-10**400):
+            with self.subTest(v=repr(v)[:20]),self.assertRaises(p.Invalid):p.number(v)
+
+    def test_units_and_source_arithmetic_are_checked(self):
+        row=copy.deepcopy(self.row('aluminium-6061-t6','young_modulus'))
+        for change in (lambda x:x.update(unit='MPa'),lambda x:x.update(value=x['value']/1000),
+                       lambda x:x['original'].update(scale_to_si=1),lambda x:x['original'].update(unit='degC')):
+            bad=copy.deepcopy(row);change(bad)
+            with self.assertRaises(p.Invalid):p.check_property(bad,self.source_map)
+
+    def test_temperature_conversions_are_affine_not_scalar(self):
+        r=self.row('epoxy-690','heat_deflection')
+        self.assertAlmostEqual(r['value'],(115-32)*5/9+273.15,places=9)
+        self.assertIsNone(r['conditions']['temperature_k'])
+        self.assertAlmostEqual(self.row('pom-c','glass_transition')['value'],213.15)
+
+    def test_electrical_resistivity_and_breakdown_have_distinct_units(self):
+        self.assertAlmostEqual(self.row('steel-304-plate','volume_resistivity')['value'],74e-8)
+        self.assertAlmostEqual(self.row('ptfe','dielectric_strength')['value'],80e6)
+        self.assertAlmostEqual(self.row('silicone-ds20','dielectric_strength')['value'],350/.0000254,delta=1e-4)
+
+    def test_ranges_never_become_a_midpoint(self):
+        result=p.native_card(self.profiles['tpu95-feedstock'],self.source_map)
+        self.assertFalse(any(r['data']['kind']=='density' for r in result['card']['properties']))
+        with self.assertRaises(p.Invalid):p.prepare('tpu95-feedstock',True)
+
+    def test_reversed_range_and_wrong_range_qualifier_refuse(self):
+        r=copy.deepcopy(self.row('tpu95-feedstock','density'));r['value'].reverse()
+        with self.assertRaises(p.Invalid):p.check_property(r,self.source_map)
+        r=copy.deepcopy(self.row('tpu95-feedstock','density'));r['qualifier']='typical'
+        with self.assertRaises(p.Invalid):p.check_property(r,self.source_map)
+
+    def test_limits_are_not_native_nominal_strengths(self):
+        result=p.native_card(self.profiles['titanium-grade5'],self.source_map)
+        kinds={r['data']['kind'] for r in result['card']['properties']}
+        self.assertNotIn('yield_strength',kinds);self.assertNotIn('tensile_strength',kinds)
+
+    def test_missing_poisson_ratio_does_not_invent_elasticity(self):
+        for id in ('steel-304-plate','peek','pa6-stock','epoxy-690'):
+            result=p.native_card(self.profiles[id],self.source_map)
+            self.assertNotIn('elasticity',{r['data']['kind'] for r in result['card']['properties']})
+
+    def test_native_steel_c45_analytic_elastic_constants(self):
+        result=p.native_card(self.profiles['steel-c45'],self.source_map)
+        model=next(r['data']['model'] for r in result['card']['properties'] if r['data']['kind']=='elasticity')
+        self.assertEqual(model['young_modulus_pa'],210e9)
+        self.assertAlmostEqual(model['young_modulus_pa']/(2*(1+model['poisson_ratio'])),80.76923076923077e9)
+
+    def test_derived_poisson_is_not_presented_as_measured(self):
+        result=p.native_card(self.profiles['c11000'],self.source_map)
+        elastic=next(r for r in result['card']['properties'] if r['data']['kind']=='elasticity')
+        self.assertIn('derived',elastic['conditions']['state'])
+        self.assertAlmostEqual(elastic['data']['model']['poisson_ratio'],17000/(2*6400)-1)
+
+    def test_derived_value_without_receipt_refuses(self):
+        r=copy.deepcopy(self.row('c11000','poisson_ratio'));del r['derivation']
+        with self.assertRaises(p.Invalid):p.check_property(r,self.source_map)
+
+    def test_wood_moisture_density_not_dry_mass_specific_gravity(self):
+        r=self.row('wood-white-oak','density')
+        self.assertAlmostEqual(r['value'],761.6)
+        self.assertNotEqual(r['value'],680)
+        self.assertEqual(r['conditions']['moisture_dry_basis_kg_kg'],.12)
+
+    def test_wood_flexure_not_isotropic_young_modulus(self):
+        result=p.native_card(self.profiles['wood-white-oak'],self.source_map)
+        self.assertNotIn('elasticity',{r['data']['kind'] for r in result['card']['properties']})
+        self.assertNotIn('compressive_strength',{r['data']['kind'] for r in result['card']['properties']})
+        self.assertIn('flexural_modulus',{r['quantity'] for r in result['not_projected']})
+
+    def test_print_directions_and_uncertainty_are_preserved(self):
+        profile=self.profiles['pla-printed']
+        strengths=[x for x in profile['properties'] if x['quantity']=='tensile_strength']
+        self.assertEqual({x['conditions']['direction'] for x in strengths},{'XY','Z'})
+        self.assertTrue(all(x['uncertainty'] is not None for x in strengths))
+        self.assertNotIn('tensile_strength',{r['data']['kind'] for r in p.native_card(profile,self.source_map)['card']['properties']})
+
+    def test_finite_strain_stress_never_becomes_elastic_modulus(self):
+        profile=self.profiles['silicone-ds20']
+        self.assertEqual(self.row('silicone-ds20','stress_at_strain')['conditions']['engineering_strain'],1)
+        self.assertNotIn('young_modulus',{r['quantity'] for r in profile['properties']})
+
+    def test_source_conflicts_stay_quarantined(self):
+        profile=self.profiles['abs-printed']
+        self.assertTrue(profile['quarantined_source_ids'])
+        self.assertNotIn('density',{r['quantity'] for r in profile['properties']})
+        with self.assertRaises(p.Invalid):p.prepare('abs-printed',True)
+
+    def test_fr4_frequency_and_cte_regimes_stay_distinct(self):
+        profile=self.profiles['fr4-370hr']
+        eps=[r for r in profile['properties'] if r['quantity']=='relative_permittivity']
+        self.assertEqual(len({r['conditions']['frequency_hz'] for r in eps}),5)
+        z=[r for r in profile['properties'] if r['quantity']=='thermal_expansion' and r['conditions']['direction']=='Z']
+        self.assertEqual({r['conditions']['thermal_regime'] for r in z},{'pre-Tg','post-Tg'})
+        self.assertNotIn('elasticity',{r['data']['kind'] for r in p.native_card(profile,self.source_map)['card']['properties']})
+
+    def test_silica_and_sapphire_are_not_the_same_material_model(self):
+        self.assertTrue(self.profiles['fused-silica']['isotropic_reference_model'])
+        self.assertFalse(self.profiles['sapphire']['isotropic_reference_model'])
+        self.assertNotIn('thermal_expansion',{r['data']['kind'] for r in p.native_card(self.profiles['sapphire'],self.source_map)['card']['properties']})
+
+    def test_references_do_not_relicense_supplier_publications(self):
+        self.assertIsNone(self.source_map['isola-370hr']['license'])
+        self.assertIsNone(self.source_map['schott-borofloat']['license'])
+
+    def test_simulant_bulk_and_grain_density_remain_distinct(self):
+        self.assertEqual(self.row('lms-1','density')['value'],1560)
+        self.assertEqual(self.row('lms-1','grain_density')['value'],2920)
+        self.assertIn('NOT measured lunar soil',self.profiles['lms-1']['reference_state'])
+
+    def test_coating_preserves_substrate_and_has_no_invented_density(self):
+        result=p.resolve('SURF-045')
+        self.assertEqual(result['binding']['physical_role'],'layer')
+        self.assertTrue(result['binding']['preserve_existing_material'])
+        self.assertFalse(result['binding']['auto_assign_body'])
+        with self.assertRaises(p.Invalid):p.prepare('az93-coating',True)
+
+    def test_no_preparation_without_explicit_reference_acknowledgement(self):
+        with self.assertRaises(p.Invalid):p.prepare('steel-c45',False)
+        result=p.prepare('steel-c45',True)
+        self.assertFalse(result['executed']);self.assertFalse(result['assigns_bodies'])
+        self.assertEqual(result['commands'][0]['params']['density_g_cm3'],7.8)
+        self.assertEqual(result['commands'][0]['command'],'material.create')
+        self.assertNotIn('appearance',result['commands'][0]['params'])
+
+    def test_unresolved_ids_fail_not_fallback_to_generic_material(self):
+        for id in ('MAT-999','SURF-999','__proto__',''):
+            with self.assertRaises(p.Invalid):p.resolve(id)
+
+    def test_false_ready_certification_and_zero_unknown_claims_refuse(self):
+        self.mutated(0,lambda d:d.update(runtime_assignment=True))
+        self.mutated(0,lambda d:d['profiles'][0].update(certified_design_allowables=True))
+        self.mutated(2,lambda d:d['catalog'][0].update(unknown_is_zero=True))
+        self.mutated(2,lambda d:d['catalog'][0].update(auto_assign_body=True))
+
+    def test_duplicate_profiles_sources_properties_refuse(self):
+        self.mutated(0,lambda d:d['profiles'].append(d['profiles'][0]))
+        self.mutated(1,lambda d:d['sources'].append(d['sources'][0]))
+        self.mutated(0,lambda d:d['profiles'][0]['properties'].append(d['profiles'][0]['properties'][0]))
+
+    def test_catalog_surface_drift_and_missing_records_refuse(self):
+        self.mutated(2,lambda d:d['catalog'].pop())
+        self.mutated(2,lambda d:d['surfaces'].pop())
+        self.mutated(2,lambda d:d['surfaces'][0].update(physical_binding_ids=['MAT-003']))
+        self.mutated(2,lambda d:d['inputs']['catalog'].update(sha256='0'*64))
+        self.mutated(2,lambda d:d['inputs']['catalog'].update(path='../../secret'))
+
+    def test_undefined_property_source_and_profile_refuse(self):
+        self.mutated(0,lambda d:d['profiles'][0]['properties'][0].update(source_id='absent'))
+        self.mutated(2,lambda d:d['catalog'][0]['references'][0].update(profile_id='absent'))
+
+    def test_nonfinite_frequency_and_unknown_conditions_refuse(self):
+        r=copy.deepcopy(self.row('fr4-370hr','relative_permittivity'))
+        r['conditions']['frequency_hz']=float('nan')
+        with self.assertRaises(p.Invalid):p.check_property(r,self.source_map)
+        r=copy.deepcopy(self.row('fr4-370hr','relative_permittivity'));r['conditions']['temperature']=20
+        with self.assertRaises(p.Invalid):p.check_property(r,self.source_map)
+
+    def test_negative_and_impossible_fraction_refuse(self):
+        for id,q,value in [('steel-c45','density',-1),('lms-1','porosity',2)]:
+            r=copy.deepcopy(self.row(id,q));r['value']=value
+            r['original']={'value':value,'unit':r['unit'],'scale_to_si':1.,'offset_to_si':0.}
+            with self.assertRaises(p.Invalid):p.check_property(r,self.source_map)
+
+    def test_native_projection_has_bounded_unique_kinds(self):
+        for profile in self.profiles.values():
+            card=p.native_card(profile,self.source_map)['card']
+            self.assertLessEqual(len(card['properties']),16)
+            kinds=[r['data']['kind'] for r in card['properties']]
+            self.assertEqual(len(kinds),len(set(kinds)))
+            self.assertTrue(all(len(r['conditions']['state'].encode())<=1024 for r in card['properties']))
+
+    def test_authority_bytes_and_exports_are_deterministic(self):
+        first=p.make_exports();second=p.make_exports()
+        self.assertEqual(p.encoded(first),p.encoded(second))
+        self.assertFalse(first['coverage.json']['numerically_complete_catalog_claim'])
+
+    def test_bounded_input_and_array_top_level_refuse(self):
+        with tempfile.TemporaryDirectory() as folder:
+            path=Path(folder)/'input.json';path.write_text('[]')
+            with self.assertRaises(p.Invalid):p.read(path)
+            with path.open('wb') as stream:stream.truncate(p.MAX_BYTES+1)
+            with self.assertRaises(p.Invalid):p.read(path)
+
+    def test_empty_native_projection_is_explicit_not_reported_ready(self):
+        for id in ('fr4-370hr','az93-coating','mdf-premier-18'):
+            result=p.native_card(self.profiles[id],self.source_map)
+            self.assertEqual(result['native_projection_status'],'extended_data_only')
+            self.assertFalse(result['card']['properties'])
+            self.assertTrue(result['not_projected'])
+
+    def test_wrong_chemistry_is_not_a_convenient_density_fallback(self):
+        by_id={row['catalog_id']:row for row in self.bindings['catalog']}
+        for id,wrong in [('MAT-145','hdpe'),('MAT-248','borofloat-33'),('MAT-439','mdf-premier-18')]:
+            self.assertNotIn(wrong,{r['profile_id'] for r in by_id[id]['references']})
+        self.assertNotIn('c11000',{r['profile_id'] for r in by_id['MAT-398']['references']})
+
+    def test_no_reference_profile_is_duplicated_with_two_roles(self):
+        for row in self.bindings['catalog']:
+            ids=[r['profile_id'] for r in row['references']]
+            self.assertEqual(len(ids),len(set(ids)),row['catalog_id'])
+
+    def test_incomplete_coverage_is_not_reported_numerically_complete(self):
+        c=p.make_exports()['coverage.json']
+        self.assertEqual(c['nonempty_native_cards']+c['extended_only_profiles'],c['profile_count'])
+        self.assertEqual(c['concepts_with_reference_candidates']+c['concepts_needing_specific_recipe'],600)
+        self.assertFalse(c['numerically_complete_catalog_claim'])
+        self.assertEqual(c['surfaces_with_reference_candidates'],48)
+
+    def test_cured_resin_state_survives_native_projection(self):
+        result=p.native_card(self.profiles['sikafloor161-cured'],self.source_map)
+        row=next(r for r in result['card']['properties'] if r['data']['kind']=='compressive_strength')
+        self.assertIn('28 days',row['conditions']['state'])
+        self.assertEqual(row['conditions']['temperature_k'],296.15)
+        self.assertNotIn('density',{r['data']['kind'] for r in result['card']['properties']})
+
+    def test_distinct_elastic_conditions_cannot_be_mixed(self):
+        for field,value in [('state','other temper'),('moisture_dry_basis_kg_kg',.1),('strain_rate_per_s',1.0)]:
+            profile=copy.deepcopy(self.profiles['steel-c45'])
+            nu=next(r for r in profile['properties'] if r['quantity']=='poisson_ratio')
+            nu['conditions'][field]=value
+            with self.subTest(field=field),self.assertRaises(p.Invalid):
+                p.native_card(profile,self.source_map)
+
+    def test_new_reference_ranges_and_fibre_axes_are_not_flattened(self):
+        pmma=p.native_card(self.profiles['pmma-goodfellow-sheet'],self.source_map)
+        self.assertNotIn('elasticity',{r['data']['kind'] for r in pmma['card']['properties']})
+        fibre=p.native_card(self.profiles['kevlar49-fibre'],self.source_map)
+        self.assertNotIn('elasticity',{r['data']['kind'] for r in fibre['card']['properties']})
+        self.assertNotIn('tensile_strength',{r['data']['kind'] for r in fibre['card']['properties']})
+        self.assertNotIn('thermal_expansion',{r['data']['kind'] for r in fibre['card']['properties']})
+
+    def test_named_coating_candidates_do_not_invent_bulk_density(self):
+        for id in ('c71-enamel','hmg-stoving-hammer','hmg-sc601-clear','uv22-coating'):
+            profile=self.profiles[id]
+            self.assertNotIn('density',{r['quantity'] for r in profile['properties']})
+            with self.assertRaises(p.Invalid):p.prepare(id,True)
+
+    def test_para_aramid_not_assigned_as_meta_aramid_honeycomb(self):
+        row=next(r for r in self.bindings['catalog'] if r['catalog_id']=='MAT-482')
+        self.assertNotIn('kevlar49-fibre',{r['profile_id'] for r in row['references']})
+
+if __name__=='__main__':unittest.main()

assets/render/selene/ELECTRONICS.md

@@ -0,0 +1,40 @@
+# Raspberry Pi 5 visual reconstruction
+
+The electronics work uses original SolidCraft geometry to replace the source board's generic port and GPIO envelopes with recognizable packages, connectors and contacts. It is a dimension-informed visual model for close inspection and rendering. It is not a complete electrical BOM, netlist, PCB fabrication file or manufacturer-certified enclosure model.
+
+## Reference geometry
+
+The [Raspberry Pi 5 mechanical drawing](https://datasheets.raspberrypi.com/rpi5/raspberry-pi-5-mechanical-drawing.pdf) gives an approximately **85 × 56 mm** board outline, **58 × 49 mm** mounting-hole spacing, **3.5 mm** offsets to the nearby edges and **2.7 mm** mounting-hole diameter. The manufacturer explicitly describes its dimensions as approximate and leaves some components out of the drawing. These are visual reference dimensions, not manufacturing tolerances.
+
+The existing SELENE PCB uses a **1.6 mm** modeled thickness. Its final placement must be read from the evaluated source: the source timeline contains later translations, so the early sketch plane is not the assembled board elevation. The component generator preserves the original mounting position and documents its exact world-coordinate origin.
+
+The [official GPIO documentation](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#gpio-and-the-40-pin-header) establishes a **2.54 mm** pitch. The visual header therefore uses two rows of 20 individually modeled pins, with a separate dark carrier and visible solder/pad details.
+
+## Component identity and connector inventory
+
+The manufacturer's [Pi 5 introduction](https://www.raspberrypi.com/news/introducing-raspberry-pi-5/) identifies the BCM2712 application processor, LPDDR4X memory, RP1 I/O controller, DA9091 power-management IC, CYW43455 wireless chip and BCM54213 Ethernet PHY. The PHY is visibly rotated 45 degrees. These identities guide named geometry rather than copied chip artwork or logos.
+
+The [current official board documentation](https://www.raspberrypi.com/documentation/computers/sbcs.html#raspberry-pi-5-ports) provides the connector inventory:
+
+| Interface | Visual modeling target |
+|---|---|
+| USB-A | Two stacked USB 2.0 ports with black tongues, two USB 3.0 ports with blue tongues; hollow metal shells and visible contacts. |
+| Ethernet | RJ45 cavity, eight contact representations and two LED windows. |
+| GPIO | 40 pins in two rows of 20. |
+| Display output | Two micro-HDMI connector shells and contact representations. |
+| Power | USB-C shell and tongue. |
+| Camera/display | Two 22-contact MIPI FFC connectors at 0.5 mm pitch. |
+| PCIe | One 16-contact FFC connector at 0.5 mm pitch. |
+| Auxiliary headers | Four-pin fan, three-pin UART, two-pin RTC and four-pin PoE. |
+| Storage | Underside microSD cage and contact representations. |
+| Board details | Power button, status LED, shields, crystals, inductors, representative passives and plated holes. |
+
+The [manufacturer's PCIe connector specification](https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf) independently confirms the 16-contact, 0.5 mm-pitch interface. Detailed solder terminations, internal contact spring shapes and production-specific component populations remain simplified.
+
+## Rendering and assembly contract
+
+A separate component groups the new electronics and attaches rigidly to the original avionics assembly. Ports have openings, tongues and contacts; separate materials distinguish solder mask, package epoxy, ceramic, connector polymer, shields, heat spreaders, solder and gold-colored plating. Appearance values are illustrative PBR controls. A bulk Brass material on a gold-colored contact is a density proxy, not a claim that the contact is solid gold.
+
+Exact body counts, removed placeholder names, generator hash and native validation results belong in the generated build evidence. No count or completed validation result is inferred from this reference document. Before shipping, check the evaluated component position, mounting-hole and header spacing, representative connector cavities, the rigid attachment and a close-up native render.
+
+All added geometry and documentation are original. No Raspberry Pi trademark artwork, manufacturer CAD, PCB texture or photograph is distributed with the model.

assets/render/selene/MECHANISMS.md

@@ -0,0 +1,137 @@
+# SELENE mechanism design and verification contract
+
+The improved native source already contains assembly structure, solar-actuator loops, wheel links and a tour. The functional derivative builds on those mechanisms through SolidCraft commands. This document distinguishes inspected source facts from reconstruction targets and the numeric checks needed to accept the result. It does not certify an unexecuted generator or replace native validation evidence.
+
+## Source assembly
+
+Read-only inspection of the pinned source in [SOURCE.md](SOURCE.md) confirms 49 joints, nine motion links and the 120-step `SELENE tour`. Joint IDs below belong to that source and must be resolved again if a derivative deletes and recreates joints.
+
+| Source mechanism | Native source identity | Relation |
+|---|---|---|
+| Wheel train | `Wheel axis -1:-90` through `Wheel axis 1:90`, IDs 1–6 | Five links, ratio +1 between neighboring wheel joints. |
+| Solar wings | Port/starboard tilt, IDs 9–10 | Mirrored rotation, ratio −1. |
+| Solar actuators | Four sets of root pin, stroke and wing pin, IDs 18–29 | Each rod follows a closed loop; slider limits −6 to +0.4 mm. |
+| Sensor and dish yaw | Turret ID 7, dish ID 16 | Source demonstrator gear, radii 24:36, ratio −2/3. |
+| Moving demonstration track | `Track slide`, ID 48 | Source rack coupling to wheel ID 1, nominal radius 38 mm, reversed. |
+| Vial cap | `Vial cap thread`, ID 49 | Cylindrical joint; 1.5 mm axial travel per full turn; slide limits 0–6 mm. |
+
+The source turret elevation is saved at −12 degrees. New bearing geometry and motion links must be constructed in a deliberately restored common neutral pose; mixing that saved pose with zero-angle link offsets can rotate new parts unexpectedly.
+
+## Reconstruction targets
+
+The individual component scripts and the executed derivative are the authority for implementation. The following bounds are deliberately narrower than the source's broad demonstration ranges. They define an inspection envelope to be checked, not a proof of global collision freedom.
+
+| Driver | Intended limits, degrees | Purpose |
+|---|---:|---|
+| Sensor azimuth | −135 to +135 | Independent pointing with a bounded cable envelope. |
+| Sensor elevation | −25 to +45 | Controlled sensor-head tilt. |
+| Dish azimuth | −120 to +120 | Independent dish pointing. |
+| Dish elevation | −35 to +40 | Controlled dish tilt. |
+| Arm azimuth | −45 to +45 | Keep a conservative showcase sweep. |
+| Shoulder | −35 to +15 | Restrict travel around the modeled clevis. |
+| Elbow | −30 to +55 | Articulate the rebuilt link stack. |
+| Wrist and tool tilt | −45 to +45 each | Bound the local tool envelope. |
+| Port solar wing | 0 to +30 | Remain within the inherited actuator stroke. |
+| Starboard solar wing | −30 to 0 | Mirror the port driver. |
+| Gripper jaw driver | −15 to +18 | Move two independently mounted jaws with opposite signs. |
+| Suspension arm | −4 to +1.5 | Short-travel closed-loop damper demonstration. |
+
+Remove the source's illustrative sensor-to-dish gear link so either assembly can point without moving the other. Transfer wheel shafts, flanges, hubs and retaining hardware to the parts they physically rotate with. The track remains an optional visualization helper. A 40 mm nominal coupling may match the grouser envelope, but it does not solve discrete grouser contact, slip or rover traction.
+
+The gripper requires separate jaw components, concentric pivot sleeves, opposite revolute motion and contact pads. A revolute joint by itself is insufficient if the jaw is still part of the fixed gripper body. The geometric envelope needs a sweep check independently of the linked angle values.
+
+## Rolling-element bearings
+
+The bearing reconstruction separates the outer race, inner race, cage and each ball. The outer race follows its housing; the inner race follows the shaft. The cage revolves around the shaft axis, and each ball spins relative to the cage while its center orbits with it. Grooved races and spaced cage bridges provide a recognizable section and visible rolling elements.
+
+Let **R** be pitch radius, **r** ball radius, and **θ** the shaft angle relative to the housing. For radial contact and an ideal no-slip bearing with a fixed outer ring:
+
+```text
+cage angle relative to housing = 0.5 × (1 − r/R) × θ
+ball spin relative to cage     = −0.5 × (R/r − r/R) × θ
+ball spin relative to housing  = −(R/r) × cage angle
+```
+
+The sign assumes all revolute axes use the same positive direction. The ball's CAD joint is relative to the cage; substituting an absolute spin rate there produces the wrong motion. These relations follow the cage and rolling-element frequencies in [Schaeffler, An Overview of Bearing Vibration Analysis, section 3](https://www.schaeffler.com/remotemedien/media/_shared_media/08_media_library/01_publications/schaeffler_2/technicalpaper_1/download_1/vibration_analysis_en_en.pdf), specialized to zero contact angle.
+
+The design uses visual clearance between ideal raceway surfaces and balls. It does not solve Hertzian contact, lubrication, cage slip, preload, bearing life or load ratings. The equations drive a kinematic demonstration; no ball-to-race contact force is inferred.
+
+For every bearing, validate a neutral pose, an interior nonzero shaft angle and its return to neutral. Compare both cage angle and relative ball spin with the equations. Also compare a ball's center of mass with its expected orbit; angle labels alone cannot prove that the component frame is correct. The spherical appearance of a ball makes spin visually ambiguous, so the joint readback is part of the evidence.
+
+## Plain yaw supports
+
+[yaw_supports.py](tools/yaw_supports.py) replaces the three source stacks of solid yaw disks with plain journal and thrust geometry. The fixed housing, rotating disk, existing component ownership and joint frames remain in place. Each housing receives a flanged brass bushing; its rotating disk gains an integral hollow steel journal. A stationary retaining pin captures the rotor inside a recess below the unchanged mast or clevis mounting plane.
+
+| Support | Fixed housing / rotor diameter, mm | Steel journal diameter, mm | Brass bore diameter, mm | Retaining pin diameter, mm |
+|---|---:|---:|---:|---:|
+| Arm | 42 / 36 | 12 | 12.2 | 5 |
+| Dish | 20 / 18 | 6 | 6.2 | 2.4 |
+| Sensor turret | 28 / 26 | 8 | 8.2 | 3.6 |
+
+The flanged thrust seats are 0.3 mm thick, with nominal seated contact against the rotating disks. Journal radial clearance is 0.1 mm; the retaining pins clear the hollow journals by 0.15 mm radially. Recessed heads provide 0.1 mm axial retention play. Four local reliefs also remove the dish housing's approximately 21.33 mm³ overlap with each original mounting head. This stage adds six bodies and no components or joints. Retainer threads use nominal cylindrical seats; fit classes, preload, friction, wear and structural capacity require separate engineering work.
+
+The official 0.18.2 reduced native fixture reproduced the actual support and neighboring mast/clevis envelopes. Its 101 commands produced 20 bodies and 67 features without timeline errors or warnings. All 44 scoped interference checks, six source-range endpoint drives, nine analytic volume checks and twelve seating/separation measurements passed; each rebuilt journal, bushing and retainer is one connected shell. The largest volume discrepancy was 0.0156%, within the stated 0.02% numerical tolerance. Native section and exterior views were inspected. This fixture evidence does not replace final integration validation; the derivative's narrower pointing limits above remain unchanged.
+
+## Closed-loop checks
+
+### Solar actuators
+
+For each actuator, rotate the tip point **T** about the wing hinge **H** and compute:
+
+```text
+stroke(θ) = length(T(θ) − R) − length(T(0) − R)
+```
+
+Here **R** is the fixed root pin. The source port hinge is at `(0, −140, 158)`, the root at `(x, −91, 134)`, and the tip at `(x, −180.40678269379407, 169.70686616300375)`, with `x = −62` or `+62`. Positive port tilt rotates about +X. At **20 degrees**, the expected stroke is approximately **−2.8662098186 mm**. The starboard wing has mirrored geometry and a negative drive angle. Verify all four sliders, not only one.
+
+The [SolidCraft mechanism reference](https://github.com/tangency-labs/solidcraft/blob/ac1768e08b83ed33212459951f5b50aa7a57cddc/skills/solidcraft-mechanisms/reference.md) documents this closed-loop pattern, `flip: true` for co-directed frames and comparison with independent length calculations. Do not key the root pins, sliders or wing pins in a study; they are followers.
+
+### Suspension dampers
+
+The short-travel reconstruction gives each drive carrier its own hinge and splits each damper into barrel and rod. With the chosen neutral frame, the root and tip separation is 22 mm. Its analytic stroke relation is:
+
+```text
+stroke(θ) = hypot(35 cos θ − 20 sin θ − 35,
+                  −35 sin θ − 20 cos θ − 2) − 22
+```
+
+Angles in this formula are radians. Expected strokes are **−2.4462732115 mm at −4 degrees** and **+0.9155981856 mm at +1.5 degrees**. Validate every closed loop against its actual reconstructed world points before using these numbers. Solid coil springs and rigid motor wires do not deform; hide them in moving inspection profiles unless a later animation model replaces them.
+
+The suspension generator retains the original `Damper piston …` and `Suspension bearing …` body labels to avoid costly late rebuilds of the source history. The piston label also names the new rod component; the pivot ring functions as a brass plain bushing and the carrier ring as a fixed spacer. Those retained labels do not alter the geometry or joint behavior.
+
+### Screw cap
+
+The expected axial displacement is `1.5 × angle_degrees / 360` mm. A 360-degree drive gives 1.5 mm; 1,440 degrees gives 6 mm. The angular and axial limits should describe the same four-turn travel. This is an ideal screw coupling; modeled thread surface contact and sealing compression require separate work.
+
+## Native acceptance
+
+Use the model's own saved studies and exact joint names. Save the final derivative with all independent drivers at the agreed neutral pose. A study should return its drivers to neutral so opening another study starts predictably.
+
+The pinned authoring executor is the official v0.18.2 CLI described in [SOURCE.md](SOURCE.md), producing format 28 for compatibility with the personal render branch. Once the master is saved and its bytes are fixed, run the independent validator from the repository root:
+
+```sh
+PYTHONDONTWRITEBYTECODE=1 python3 assets/render/selene/tools/validate_native.py \
+  --cli /path/to/solidcraft-cli \
+  --model assets/render/selene/models/SELENE-functional.solidcraft \
+  --out target/selene/validation-final \
+  --interference-pairs assets/render/selene/motion/interference-pairs.json
+```
+
+Use a new output directory for every run. The default suite performs 25 sampled driven cases and a final neutral check. Before each case it reads all independent joint coordinates, resets those that are nonzero, and verifies every primary coordinate is neutral. It compares actual native joint readbacks and world-coordinate centers of mass, retaining requests, responses, hashes, tolerances and failures. It drives an in-memory copy and never saves test poses to the master. The input model and pinned original must have identical hashes before and after validation.
+
+Run full-model native processes serially. The validator confines its native subprocess to two Rayon workers and sets one glibc allocation arena with 64 KiB mmap and trim thresholds. These resource settings are recorded in the report alongside the unchanged geometric tolerances.
+
+Optional `--interference-pairs path/to/pairs.json` accepts a JSON array of exact body-name pairs. The committed [selection](motion/interference-pairs.json) requests seven neutral-pose checks for opposing arm links, the tool wrist, gripper jaws and PCB connector clearances. Each pair receives its own bounded native interference check. The result records whether conservative broad-phase exclusion or exact Boolean intersection resolved it. Missing bodies, skipped or unchecked pairs, truncation and budget exhaustion remain failures or incomplete checks. A request to run the suite is not a passing result; report the returned status and evidence path explicitly.
+
+The minimum evidence for each accepted mechanism is:
+
+- A native timeline with no unreviewed errors or geometry warnings.
+- A grounded assembly chain and a clean joint graph; no unexplained floating mechanism, loop conflict or coupling error.
+- Actual movement of the intended occurrence, with positions or centers of mass checked before and after.
+- Numeric follower agreement at selected interior and endpoint values, with native degrees/mm distinguished from persisted radians/mm.
+- Scoped interference checks between parts that must clear each other. Timeouts and unchecked pairs remain incomplete checks, never passes.
+- A native view or render showing the actual geometry. A diagram or an inferred body count cannot substitute for this review.
+
+Broad all-body pair checks are expensive and can confuse deliberate mating contact with penetration. Check the relevant opposing link plates, clevis/race seats, shaft/bore and gripper contacts explicitly. A few passing samples do not prove clearance across every possible combination of joint angles.
+
+Lunar gravity, loads, motor torque, thermal behavior, flexible wiring, suspension spring dynamics, granular terrain and autonomous sample capture remain separate simulation and animation work.

assets/render/selene/README.md

@@ -0,0 +1,89 @@
+# SELENE functional showcase
+
+This package develops the **author-supplied improved SELENE** into an editable native model for close-up rendering and subsequent mechanism animation. The input is SychPL's `SELENE-showcase.solidcraft`, matched byte for byte to his published file. The original is retained unchanged; the enhanced derivative is [models/SELENE-functional.solidcraft](models/SELENE-functional.solidcraft).
+
+Open the derivative in the personal SolidCraft render branch. The model contains the geometry, component ownership, joints, motion links, physical-material proxies, appearances, browser groups, saved views and inspection studies. Python is only a development tool for reproducing the changes; opening and using the design does not require Python.
+
+![SELENE functional showcase in native Design shading](exports/SELENE-overview.png)
+
+*Actual native Design preview of the neutral master. Close-ups and the product-render executor's current limits are documented in [RENDER.md](RENDER.md).*
+
+## What changed
+
+| Area | Native implementation |
+|---|---|
+| Rolling-element bearings | Ten open radial bearings at the arm and sensor head. Each has grooved steel races, eight individually represented balls and a brass cage. The inner race follows the shaft, the outer race follows the housing, and linked revolutes drive cage orbit and relative ball spin. |
+| Arm joints | Revised plate spacing, bored seats, stepped clamp hubs, shafts, spacers, locking screws and a machined wrist tongue. Rigid decorative hydraulic cylinders that would detach during movement are removed. |
+| Gripper | Two separate moving jaw components, concentric brass plain sleeves, opposite revolute motion and elastomer contact pads. Its commanded range is −15° to +18° at the driver. |
+| Suspension | Six hinged trailing carriers with reinforcing gussets. Separate hollow damper barrels and rods form six closed revolute–slider–revolute loops. Local support reliefs clear the moving eyes and arms over the bounded travel. |
+| Drivetrain | Wheel shafts, hubs, flanges and retaining screws belong to the rotating wheels. Wheel joints attach to the moving carriers. The optional demonstration track uses a 40 mm nominal rolling radius. |
+| Yaw supports and pointing | Three solid-disk placeholders become journal supports with flanged brass bushings, hollow rotating journals and recessed axial retaining pins. Sensor and dish pointing are independent; the illustrative gear coupling is removed. |
+| Raspberry Pi 5 | A board with rounded corners, mounting holes, plated pads and vias, plus 491 new bodies for packages, shields, passives, headers, connector housings, contacts, solder details and mounting tabs. Hollow ports replace solid envelopes. |
+| Materials and appearance | Retained orange/charcoal identity with distinct metals, polymer, elastomer, FR4, silicon and optical surfaces. Opaque bodies carry PBR values; physical density proxies are explicitly separate from optical properties. |
+| Sample laboratory | Each glass vial is one hollow native solid with an integral bottom, retaining its original external dimensions. The existing screw-driven cap retains 1.5 mm travel per revolution. The source rock is grounded as demonstration scenery. |
+| Inspection | Body groups by function, ten named views with render setup records, seven focused motion studies, and an adapted copy of the author's original tour. |
+
+The native build and independent acceptance run have separate evidence. See [VALIDATION.md](VALIDATION.md) for the final hash, actual counts, executor, completed checks and remaining limitations. [MECHANISMS.md](MECHANISMS.md) gives the joint conventions and independent equations; [ELECTRONICS.md](ELECTRONICS.md) explains the board reconstruction and its fidelity boundaries.
+
+## Using the model
+
+The file opens in the neutral pose: all independent drivers are at zero, including sensor elevation. Saved views are named `SELENE - Whole rover`, `Electronics`, `Shoulder bearing`, `Elbow bearing`, `Gripper`, `Sensor head`, `Sample laboratory`, `Drivetrain`, `Suspension` and `Solar cells`, each with the same `SELENE - ` prefix.
+
+Use the seven inspection studies for drivetrain, solar deployment, arm articulation, gripper, independent sensor pointing, sample cap and suspension. They return their independent drivers to neutral. The inherited tour is named **`SELENE - Legacy author tour (adapted limits)`**; it preserves the author's keyed motion while resolving recreated wheel joints and clamping the selected limits. A keyed study is an authoring resource, not evidence that every frame of every combined pose has been cleared.
+
+For suspension motion, hide the six rigid spring solids and twelve motor leads. They remain useful neutral-pose render details but do not deform. The `motion` visibility profile in [tools/presentation.py](tools/presentation.py) performs this selection and also hides the optional track and source flexible-hose display geometry. Export or save inspection poses to a separate file; keep the master neutral.
+
+The source cap has an ideal screw relation. The six complete vials remain in the sample laboratory assembly. Independent grasp, release, free flight and capture are future work; the current cap motion does not implement those events.
+
+## Reproduce the native derivative
+
+Use Python 3.11+ and the **official SolidCraft v0.18.2 CLI** identified in [SOURCE.md](SOURCE.md). That executor writes `solidcraft/28`, readable by the personal render branch's format-29 reader. The newer official v0.19.0 writes format 30 and is unsuitable as a drop-in authoring replacement for that branch. No format marker is edited to bypass compatibility.
+
+From the repository root:
+
+```sh
+PYTHONDONTWRITEBYTECODE=1 python3 assets/render/selene/tools/build.py \
+  --cli /path/to/solidcraft-cli \
+  --work target/selene/rebuild \
+  --output target/selene/SELENE-functional.solidcraft
+```
+
+The builder checks the pinned original, evaluates it, then uses only native commands. Stages run in fresh processes so the large model's undo history remains bounded. Each stage retains its command script, full native results, timing trace and saved checkpoint under the selected work directory. Every checkpoint must have a clean feature timeline, unique live body names and a clean joint graph. The build history records hashes of the source, executor, recipes, results and checkpoints.
+
+Resume an interrupted build by repeating the command with `--resume`. The builder rejects changed recipes, executables, results or checkpoints. `--until` stops at a named stage for inspection. Inspect failures in their logs; use a separate work directory when changing an already completed stage.
+
+Run independent acceptance on the saved derivative:
+
+```sh
+PYTHONDONTWRITEBYTECODE=1 python3 assets/render/selene/tools/validate_native.py \
+  --cli /path/to/solidcraft-cli \
+  --model target/selene/SELENE-functional.solidcraft \
+  --interference-pairs assets/render/selene/motion/interference-pairs.json \
+  --out target/selene/acceptance
+```
+
+This drives an in-memory copy and compares native joint readbacks and occurrence centers of mass with independent calculations. It never saves test poses over the master. Optional exact-name interference pairs are bounded and report unchecked pairs as incomplete. Detailed execution evidence stays in `target/`; production native files and English documentation are the shipped resources.
+
+## Render preparation and the wider catalog
+
+The full-detail [native 4K studio render](RENDER.md#full-detail-4k-path-traced-studio-image-2026-10-22) now provides a path-traced showcase of the unchanged functional master. It preserves all original visible geometry, uses explicit glass and authored materials, and ships with its exact [request/provenance manifest](scenes/studio-hero.json). The Design previews remain distinct geometry-inspection resources.
+
+The ten saved camera/setup records and the model's body appearances are concrete native resources. [RENDER.md](RENDER.md) documents the actual image workflow and any executor limits. Transparent viewport appearances alone do not establish physical refraction, and density does not supply roughness, friction, electrical behavior or optical transmission.
+
+The existing [48-appearance pack](materials/appearance-pack.json), [33 semantic roles](scenes/roles.json), [ten stage specifications](scenes/stages.json), [12 shots](scenes/shots.json), [UI flow](ui/demo-flow.json) and [future sample dynamics sequence](motion/sample-sequence.json) remain a broader authoring specification. The source is now pinned; those resources still need their individual geometry bindings and renderer admission. The catalog's `runtime_ready: false` status is intentional. No lunar terrain, dust dynamics, calibrated optical library or throw-and-catch simulation is implied by the native model's completion.
+
+```sh
+python3 docs/render-materials/validate_catalog.py
+python3 assets/render/selene/tools/validate_prepared.py
+cargo xtask ci
+```
+
+The Python checks validate prepared data and the source contract. They do not replace native geometry, mechanism or visual checks. Repository-wide gate status is recorded separately in the validation report.
+
+## Provenance and scope
+
+[SOURCE.md](SOURCE.md) and [source-lock.json](source-lock.json) pin the exact source bytes and author history. The original rover is credited to 0xlillith, the improved showcase assembly to SychPL, and the emblem to SolidCraft contributors. Ubuntu Light lettering retains its [Ubuntu Font Licence notice](licenses/UFL.txt). The source branch has no separate file-specific license declaration for the showcase additions; that provenance distinction is preserved.
+
+New geometry, procedural scripts and documentation are original contributions under MIT OR Apache-2.0. Exact non-Markdown asset rows are in [ATTRIBUTION.md](../../../ATTRIBUTION.md). Manufacturer CAD, PCB artwork, logos and netlists are not embedded.
+
+The model demonstrates geometric detail and ideal kinematics. It is not a manufacturing release, a complete electrical design, a load-rated bearing selection or a physics simulation. Joint limits are a documented inspection envelope; sampled checks do not certify every simultaneous arm, solar and suspension configuration.

assets/render/selene/RENDER.md

@@ -0,0 +1,124 @@
+# SELENE native rendering and reproducible studio showcase
+
+## Full-detail 4K path-traced studio image (2026-10-22)
+
+![SELENE native studio render](exports/SELENE-studio-4k.png)
+
+The selected [3840 x 2400 PNG](exports/SELENE-studio-4k.png) is a completed native SolidCraft GPU-path render of the latest functional master, not a Design screenshot, a generated illustration, a painted geometry replacement or an upscaled preview. The exact request, original resource hashes, editable source and executable identities are retained in [studio-hero.json](scenes/studio-hero.json).
+
+| Property | Verified value |
+|---|---|
+| Editable authority | `models/SELENE-functional.solidcraft`, original bytes unchanged |
+| Functional source commit | `cf8e651022deee528b26c303fde58bf3eb8a22a5` |
+| Native model SHA-256 | `3bd2bfa1c6336394c4a4208d30b52c80d06658a3bd7ea57cc93b774411d1bd68` |
+| Evaluated native bodies | 2,116; zero timeline errors or warnings |
+| Original visible subject | 2,094 bodies; 2,144,099 triangles |
+| Separate render-only stage | One passive ground rectangle; 2 triangles |
+| Optical bodies | 12 explicitly selected closed dielectric bodies; topology and medium-overlap checks retained |
+| Authored surface detail | 48 exact body bindings across six original surface families |
+| Output | 3840 x 2400, RGBA8 PNG, sRGB |
+| Sampling | 1,024 samples per pixel; maximum path depth 16; seed 21026 |
+| Presentation | ACES-fitted tone mapping and edge-aware a-trous denoising |
+| Lighting | Original RIG-002 rectangular emitters, explicit 1/16 creative radiance gain, original HDR-002 fill at intensity 0.12 |
+| Camera | Perspective fit to all captured body bounding boxes; 8% frame margin |
+| Native executable source | `895704a2fdc96dabb9a2afb2e548a8896e4b1e79` |
+| Native executable SHA-256 | `3421d538c571647c1f24fd74d63487c4ba4ab597980cfeea111a01c0db94e699` |
+| Completed PNG SHA-256 | `40a492e7979137d0f4027300da3d8af7ca1008c1aab2c309259e65d309a17316` |
+| PNG length | 2,388,114 bytes; chunk CRCs, bounded scanlines and final-frame hash verified |
+
+The image uses the original saved visibility and neutral pose. There is no mesh simplification, geometry removal, hidden resolution downgrade, engineering-material reassignment or software-device fallback. The native job's logical admission estimate was 2,814,770,732 bytes; this is not a peak-RSS or GPU-memory measurement. Hardware-only policy and Vulkan were enforced on Pegasus; the hardware survey identifies its AMD Radeon 8060S.
+
+### Reproduction
+
+Build the native CLI once, then reuse the loaded model and device:
+
+```sh
+cargo build --locked --profile ci -p solidcraft-cli --bin solidcraft-cli
+python -i tools/render-library/selene_studio.py --cli /path/to/solidcraft-cli   --out /new/output/directory
+```
+
+In the resulting interactive studio:
+
+```python
+from selene_recipe import hero_request
+request = hero_request(studio, width=3840, height=2400, samples=1024)
+receipt = studio.render("selene-studio-4k", request, timeout=7200)
+studio.close()
+```
+
+The helper checks the pinned master and binary, public-command preparation, resource hashes, actual executor, exact requested dimensions and exported frame bytes. The frame is not automatically declared visually accepted. The original camera-fit/publication tools and seven independent Python tests are under `tools/render-library/`; provisional images, native-pixel crops and execution logs stay outside the shipped resource collection.
+
+### Quality and scope
+
+The complete image and four unscaled detail crops were visually reviewed: subject and gripper framing, mechanical edges, electronic connectors, glass and highlights remain readable. Residual Monte Carlo grain is visible at native pixel scale in some vial/lens regions; the current denoiser deliberately does not reconstruct those transmission paths. This is a high-quality native showcase, not proof of zero residual noise or a completed maximum-quality renderer roadmap.
+
+RGB absorption and material recipes are illustrative authored optical choices, not measured glass spectra or engineering properties. The explicit rig gain is a creative lighting adjustment, not an unchanged photometric calibration. Normal maps alter shading, not CAD geometry. LED diffusers are transmitted surfaces, not validated volumetric/mesh emitters. The static image does not establish collision-free motion, contact physics, lunar dust or dynamics.
+
+Native renderer tests passed 457/457. The hardware GPU suite passed 95 tests with three explicitly ignored tests, and the official 12-crate library/web WASM check passed. Whole-workspace type checking, strict lint, resource/persistence command checks and camera/publication tests have their own evidence. Interactive GUI acceptance and whole-project CI are not inferred from this image. The focused Render-workspace harness also passed 58 tests with no failures; its click-stability repair and remaining whole-project acceptance scope are recorded in the batch ledger and PR #7.
+
+## Historical Design previews and earlier CPU-product evidence
+
+The sections below preserve the earlier `10ada1b4` CPU-product/Design observations. Their resource ceilings describe that legacy raster executor, **not** the current native GPU path or the explicit larger CPU raytrace profiles. The whole-master GPU limitation described in that historical workflow is now resolved by the completed image above.
+
+
+The enhanced native master is the editable authority. Its ten named camera and render-setup records make close inspections reproducible. Body appearances distinguish metals, painted structure, elastomer, FR4, packages, contacts and optical surfaces. The orange and charcoal identity is retained.
+
+## Reusable Design previews
+
+The package ships three previews generated directly by SolidCraft from the final neutral master: a whole-rover overview, the Raspberry Pi assembly and an exposed elbow bearing. They use native Design shading. They are intended for the model's README and showcase preparation; they are not photographs or path-traced optical renders. No raster image generator or painted replacement geometry is involved.
+
+| Preview | Resource | Purpose |
+|---|---|---|
+| Whole rover | [SELENE-overview.png](exports/SELENE-overview.png) | Overall form, component placement and retained visual identity. |
+| Electronics | [SELENE-electronics.png](exports/SELENE-electronics.png) | Board, mounting, packages and connector mouths, viewed from the +X side. |
+| Open bearing | [SELENE-bearing.png](exports/SELENE-bearing.png) | Grooved races, individual balls and the brass cage. |
+
+Regenerate them in a fresh output directory:
+
+```sh
+PYTHONDONTWRITEBYTECODE=1 python3 assets/render/selene/tools/export_views.py \
+  --cli /path/to/solidcraft-cli \
+  --model assets/render/selene/models/SELENE-functional.solidcraft \
+  --out target/selene/previews
+```
+
+The exporter opens the entire native model once, changes only transient body visibility and cameras, and requests three native MCP screenshots. It saves no changes to the master and verifies its SHA-256 afterward. The output report records the actual capture metadata, image hashes, dimensions, cameras and executor hash. Its default size is 1400 × 1000 pixels.
+
+The body selector for electronics retains the PCB, all `Pi5 ` componentry and the `Pi M2.5` mounting hardware. The bearing selector isolates `Bearing Elbow port`. The full overview hides the optional track and source flexible-hose display geometry. None of these visibility changes delete geometry.
+
+## Actual product-render checks
+
+The personal fork at `10ada1b45a4eb285ce752ac72f9aaa968ff8b5c4` was compiled and exercised using its native `cpu-product` executor. The binary reports version 0.18.2 and writes native format 29. Its binary SHA-256 was `2a5485f7c7832d29b6340988837316e247b94eeeb9d4f7333ee616cea38c6826`.
+
+Two bounded opaque PBR images passed native preflight and rendering:
+
+| Actual subject | Visible bodies | Triangles | Admitted job estimate | Output |
+|---|---:|---:|---:|---|
+| Fresh single arm-bearing fixture generated by `bearings.py` | 20 | 93,654 | 43,594,876 bytes | 768 × 576 PNG, 51,705 bytes |
+| Pi isolated from the actual integrated stage-03 model | 504 | 103,004 | 50,848,960 bytes | 768 × 576 PNG, 42,351 bytes |
+
+Both returned no preflight warnings and were visually inspected. The Pi geometry was taken from the integrated rover checkpoint, not a replacement board illustration. The single-bearing image was a reduced fixture of the production geometry; it was not a rendering of the whole rover. Their raw logs, transient native files and review images belong under ignored `target/selene/render-review/`. The final model and reusable Design previews have separate hashes in [VALIDATION.md](VALIDATION.md).
+
+That historical `cpu-product` raster path uses three fixed directional studio lights. Pure metals look dark away from their highlights because it does not provide an ambient or HDRI contribution in this path. This behavior does not mean the material assignments were lost. Use the Design previews to inspect geometry, and inspect PBR behavior with the product executor's actual lighting limits in mind.
+
+## Historical whole-model CPU-product resource limit
+
+At this fork revision the CPU product-image path admits at most **262,144 triangles**, **128 MiB of source geometry**, **384 MiB per job estimate** and **128 million projected pixel tests**. A single arm ball has 10,224 reference-mesh triangles; the 64 arm balls alone account for 654,336 triangles, before the head bearings or rover are included. The full-detail model therefore exceeds this CPU product triangle cap.
+
+Reducing output dimensions reduces image buffers, not reference-mesh triangle count. Changing viewport display quality does not lower the meshes used by this product renderer. Do not bypass the admission check or silently remove mechanical detail from the master. Use the whole native Design preview, isolate a component for current CPU PBR work, or author a separately documented reduced-visibility render scene. A future whole-rover render executor must admit the complete scene or explicitly support a documented mesh-detail policy.
+
+CAD evaluation is additional to the render-job estimate. Opening the integrated stage-03 model during these checks took about 102 seconds and peaked near 3.76 GiB RSS. Later assemblies are larger. Run the native builder, validation and full-model image export **sequentially**. The provided tools constrain native worker threads and use an explicit allocator policy; detailed evidence records resource failures and recovered attempts rather than treating them as passes.
+
+## Material and optical boundaries
+
+- Opaque PBR values are authored visual parameters, not measured BRDF data. Painted orange and charcoal surfaces retain dielectric/coated appearances; exposed races, balls, contacts and shafts have separate metal responses.
+- Engineering-material density is a nominal proxy. It does not establish the complete component mass, electrical specification, thermal performance or contact friction.
+- Each glass vial is one hollow native solid with an integral bottom. This supplies coherent geometry for later closed-medium admission.
+- Viewport opacity is not physical refraction. Camera lenses, diffusers and vials require explicit optical descriptors, lighting and medium validation; the current studio recipe above supplies and validates them without rewriting the native master.
+- No lunar terrain, illumination ephemeris, dust simulation, HDRI or manufacturer PCB artwork is bundled in the native derivative.
+
+## Preparing animation shots
+
+Use the seven focused studies to inspect the actual joint chains. Hide the six rigid suspension coils and twelve motor leads while the suspension moves; these neutral render details do not deform. The `motion` profile in `presentation.py` selects that view. Removed arm hydraulic display cylinders do not reappear during motion.
+
+Keep the final master neutral and export motion/render copies separately. The adapted author tour and focused studies are kinematic authoring resources. A complete animated shot still needs its selected combined path checked for collisions, a timing choice, flexible-detail treatment and any physical contact model it intends to claim. Throwing and catching a free vial remains future dynamics work.

assets/render/selene/SOURCE.md

@@ -0,0 +1,70 @@
+# SELENE native source and lineage
+
+The owner supplied **`SELENE-showcase.solidcraft`**, the improved mechanism demonstration published by **SychPL (Mateusz Sych)**. Its bytes match the file added to the author's `media/selene-showcase` branch on 2026-10-21. The unchanged source is retained at [source/SELENE-showcase.solidcraft](source/SELENE-showcase.solidcraft); [source-lock.json](source-lock.json) pins its identity and records the review.
+
+The functional showcase is a new derivative of this file. The older `Rover-v7.solidcraft` remains a historical reference, not the modeling input.
+
+## Exact identity
+
+| Field | Verified value |
+|---|---|
+| Author repository | `SychPL/solidcraft` |
+| Source branch | `media/selene-showcase` |
+| Commit | `32ec1720447e3fcc6bb6cc53a63fb5b39cfa21b9` |
+| Published timestamp | `2026-10-21T20:00:01Z` |
+| Repository path | `SELENE-showcase.solidcraft` |
+| Git blob SHA-1 | `a06fee2c8a839f5efccc75ae6de4e68f951cb266` |
+| SHA-256 | `1b0df486f30da157db27a33e0b5ed67f13d527d4dfdc6c334717a1df4e5b8677` |
+| Length | 314,452 bytes |
+| Native container | ZIP with `document.json` and `container.json` |
+| Native source format | `solidcraft/23` |
+| Units | Millimeters; Z up. Stored angles are radians; joint commands accept degrees. |
+
+The [source commit](https://github.com/SychPL/solidcraft/commit/32ec1720447e3fcc6bb6cc53a63fb5b39cfa21b9) identifies the design as Rover-v7 with closed-loop actuators, links, gears and the SELENE tour study. Both the Git blob hash and SHA-256 were computed independently from the supplied attachment on 2026-10-22.
+
+Read-only container inspection found **3,378 features, 47 component definitions, 47 occurrences, 49 joints, nine motion links and one motion study**. These are source-document counts. They do not establish that every feature evaluates, that every body survives the timeline, or that the assembly is collision-free. Native evaluation and derivative checks are separate evidence.
+
+## Following the original clue
+
+The owner's [exact pinned mechanism reference](https://github.com/tangency-labs/solidcraft/blob/ac1768e08b83ed33212459951f5b50aa7a57cddc/skills/solidcraft-mechanisms/reference.md) describes the SELENE solar-actuator loops, wheel and solar motion links, grounded modules and visibility treatment. It also specifies command units, joint-origin conventions and validation methods. Those descriptions led to the author's showcase history.
+
+| Evidence | What it establishes |
+|---|---|
+| [Native source at `32ec1720`](https://github.com/SychPL/solidcraft/blob/32ec1720447e3fcc6bb6cc53a63fb5b39cfa21b9/SELENE-showcase.solidcraft) | The exact improved design supplied by the owner. |
+| [Parent media commit `df2e7423`](https://github.com/SychPL/solidcraft/commit/df2e74230e6659409d65501b5d9396b55c6503d3) | Three earlier GIF demonstrations, with credit to 0xlillith and Apache-2.0/MIT for the original model. |
+| [Author's showcase comment on PR 1540](https://github.com/tangency-labs/solidcraft/pull/1540#issuecomment-6205857321) | The combined demonstration and the motivation for its added mechanisms. |
+| [Motion export PR 1680](https://github.com/tangency-labs/solidcraft/pull/1680) | The exact showcase filename and tour/export examples. |
+| [Original rover repository](https://github.com/0xlillith/solidcraft-rover/tree/b32437915372d32b71419dc8f5143fe22ff1e869) | The owner's original Rover-v7 model and its attribution. |
+
+The source lock preserves the earlier bounded public search as historical evidence. That search had inspected the media branch before the native file was added. Its former `awaiting_native_source` outcome is superseded by the supplied file and the new author commit; it is not a current blocker.
+
+## Authorship and notices
+
+The [original rover attribution](https://github.com/0xlillith/solidcraft-rover/blob/b32437915372d32b71419dc8f5143fe22ff1e869/ATTRIBUTION.md) offers the original model under **MIT OR Apache-2.0** and credits the SolidCraft emblem to SolidCraft contributors. The original modeled lettering follows **Ubuntu Light** outlines by Canonical Ltd., under the **Ubuntu Font Licence 1.0**. Its exact notice is retained in [licenses/UFL.txt](licenses/UFL.txt). No font binary is added.
+
+SychPL is credited for the improved assembly, helper geometry and showcase study.
+On 2026-10-23T22:13:37Z, [SychPL explicitly licensed their additions](https://github.com/tangency-labs/solidcraft/pull/5494#issuecomment-6375788360)
+under **MIT OR Apache-2.0**, at the recipient's option. The grant expressly covers
+redistribution and derived files, including `SELENE-functional.solidcraft`.
+The author media branch itself has no separate licence file; the linked public
+author declaration supplies the previously missing permission. The original
+rover and Ubuntu Font Licence notices above remain applicable and unchanged.
+
+New procedural geometry, English documentation and command generators in this derivative are original contributions. Raspberry Pi references inform dimensions and component identity; manufacturer CAD, logos, PCB artwork, electrical netlists and photographs are not embedded. No commercial CAD assets or GPL geometry implementations are imported.
+
+## Authoring runtime and format compatibility
+
+The reconstruction workflow selects the official **SolidCraft v0.18.2 Linux x86_64 CLI**. Its [published release](https://github.com/tangency-labs/solidcraft/releases/tag/v0.18.2) identifies source commit `4927214976ff20758fde35af03bd6b2d6cf73e18`. The release archive SHA-256 is `9d0c922ac72204f34ad22ca7a171be78016ab002e304ace3c07d34d187d830ff`; the extracted CLI SHA-256 is `e50fe78292d569c36052b24f46f1732bc4e43d1ecdac6a64092aa1cee3b97086`. The executor is an external development dependency and is not bundled as a model asset.
+
+This runtime writes **`solidcraft/28`**, which the personal render branch's format-29 reader can migrate. The unchanged source remains in format 23. The newer official v0.19.0 writes format 30, beyond that render branch's reader, so its isolated component fixtures remain development evidence rather than the authoritative final build. Final acceptance must name the actual executor and final model hash; success in a different runtime does not replace that run. No native format marker is rewritten by these tools.
+
+## Reproducibility boundaries
+
+- Keep the pinned source unchanged. Author geometry, appearances, components, joints and studies through SolidCraft commands into a separately named derivative.
+- Record the executor version and binary hash with each native build. A newer native format is not backwards compatible merely because geometry looks similar. Do not edit a file's format marker to bypass this restriction.
+- Bind exact evaluated body names and component identities. Feature declarations alone are not a body inventory.
+- Verify joint movement and followers against independent calculations. A successful command without actual movement is not a successful mechanism test.
+- Preserve execution failures and incomplete checks explicitly. Do not carry validation claims from a lost intermediate checkpoint into a newly rebuilt model.
+- A native model suitable for inspection and render preparation is not a certified manufacturing design, an electrical design, or a physically simulated lunar rover.
+
+The prepared appearance catalog, scene specifications and future dynamics sequence have their own evidence status. Admitting this source does not automatically bind or validate those resources.

assets/render/selene/VALIDATION.md

@@ -0,0 +1,147 @@
+# SELENE native validation
+
+This report distinguishes evaluation of the complete saved rover, independent checks of its motion, reduced geometry fixtures and actual image generation. A clean feature timeline alone does not establish mechanical clearance, and a reduced fixture does not establish a collision-free whole rover.
+
+## Native artifact and executors
+
+The saved derivative is [models/SELENE-functional.solidcraft](models/SELENE-functional.solidcraft), **439,883 bytes**, native format **`solidcraft/28`**. Its SHA-256 is:
+
+```text
+3bd2bfa1c6336394c4a4208d30b52c80d06658a3bd7ea57cc93b774411d1bd68
+```
+
+The unchanged source is `source/SELENE-showcase.solidcraft`, 314,452 bytes, SHA-256 `1b0df486f30da157db27a33e0b5ed67f13d527d4dfdc6c334717a1df4e5b8677`. It is byte-identical to SychPL's published improved showcase file; [SOURCE.md](SOURCE.md) pins its author commit and license evidence. Native evaluation of that source found 1,418 bodies and no feature errors or warnings. Its container has 3,378 history features, 47 components excluding root, 47 occurrences, 49 joints, nine motion links and one motion study.
+
+The authoring and final acceptance executor is the official SolidCraft v0.18.2 Linux CLI, SHA-256 `e50fe78292d569c36052b24f46f1732bc4e43d1ecdac6a64092aa1cee3b97086`. It writes `solidcraft/28`. The personal render branch's format-29 reader accepts that format. The native container is only read for inspection and selector construction; all CAD changes are made through SolidCraft commands.
+
+The personal fork at `10ada1b45a4eb285ce752ac72f9aaa968ff8b5c4` was also compiled successfully and used for bounded product-render checks. Its CLI SHA-256 is `2a5485f7c7832d29b6340988837316e247b94eeeb9d4f7333ee616cea38c6826`. This separately built executable is not substituted into the authoring checkpoint chain.
+
+## Complete-model build and motion acceptance
+
+The full native build passed **17 saved stages and 2,318 native commands**, including the explicit inventory and graph inspections. Its final timeline has **zero errors and zero warnings**; all live body names are unique. The final native joint graph reports no errors, conflicts or floating occurrences.
+
+| Native inventory | Supplied source | Functional derivative |
+|---|---:|---:|
+| Evaluated bodies | 1,418 | 2,116 |
+| Components excluding root | 47 | 172 |
+| Occurrences | 47 | 172 |
+| History features | 3,378 | 5,484 |
+| Joints | 49 | 180 |
+| Motion links | 9 | 99 |
+| Motion studies | 1 | 8 |
+
+The final joint inventory contains 135 revolutes, 11 sliders, 33 rigid joints and one cylindrical joint. The saved document also contains **121 browser groups, ten named views and ten render setup records**. The build history and final native inventory are in `target/selene/native-build/`.
+
+Independent final-master acceptance **passed all 33 cases and 880 numerical comparisons** in a fresh official v0.18.2 process. The run completed on 2026-10-22, from 08:40:24 to 08:53:15 UTC, with exit code 0. It exercised 26 kinematic/neutral cases and seven selected neutral-pose interference pairs. Both the master and original source remained byte-for-byte unchanged. All 19 independent drivers were neutral on open and after the final reset; the tested graph inspections reported no errors, conflicts or floating occurrences.
+
+| Kinematic case family | Cases | Accepted exercise |
+|---|---:|---|
+| Drivetrain | 1 | Six wheels follow the driver; a 90° turn gives −62.831853 mm demonstration-track travel at the 40 mm nominal radius. Independent wheel and track world-position checks pass. |
+| Solar deployment | 1 | The selected 20° deployment closes all four actuator loops and agrees with the independently calculated strokes. |
+| Independent pointing | 2 | Sensor and dish pointing are driven independently, with native follower and world-position checks. |
+| Gripper | 2 | Driver endpoints −15° and +18°, opposite follower values and jaw world positions. |
+| Sample cap | 2 | 360° and 1440° rotation produce 1.5 mm and 6 mm axial travel respectively. |
+| Suspension | 12 | Each of six carriers is driven to both −4° and +1.5°. Closed-loop strokes and carrier world centers of mass match independent calculations. |
+| Rolling-element bearings | 5 | Shoulder, elbow, wrist, tool tilt and sensor elevation drivers exercise all ten bearing cages and 80 ball-spin relations, with one orbital witness per bearing. |
+| Neutral reset | 1 | All 19 independent driver coordinates return to zero. |
+| **Kinematic total** | **26** | **All passed.** |
+
+The 880 numerical comparisons include repeated neutral-coordinate readbacks between cases; they are not 880 distinct poses. Numerical agreement is a solver check, not a manufacturing tolerance claim.
+
+| Numerical quantity | Comparisons | Maximum absolute error | Acceptance tolerance |
+|---|---:|---:|---:|
+| Joint angles | 756 | 7.106 × 10⁻¹⁵° | 10⁻⁶° |
+| Linear joint coordinates | 19 | 3.777 × 10⁻¹¹ mm | 10⁻⁵ mm |
+| Suspension strokes, included above | 12 | 3.927 × 10⁻¹² mm | 10⁻⁵ mm |
+| World center-of-mass coordinates | 105 | 4.443 × 10⁻⁵ mm | 0.002 mm |
+| Bearing orbit coordinates, included above | 30 | 1.318 × 10⁻⁵ mm | 0.002 mm |
+
+The largest linear error was a solar actuator stroke; the largest world-coordinate error was the dish yaw mount's center-of-mass height.
+
+| Selected neutral-pose pair | Completed method | Result |
+|---|---|---|
+| `Shoulder link -9` / `Elbow link -9` | Exact solid intersection | Clear |
+| `Elbow link -9` / `Distal wrist link -9` | Exact solid intersection | Clear |
+| `Tool wrist machined tongue` / `Tool tilt joint shaft` | Exact solid intersection | Clear |
+| `Gripper jaw -1` / `Gripper jaw 1` | Conservative broad-phase separation | Clear |
+| `Raspberry Pi 5 PCB` / `Pi5 USB2 mounting tab 1` | Exact solid intersection | Clear |
+| `Raspberry Pi 5 PCB` / `Pi5 USB3 mounting tab 2` | Exact solid intersection | Clear |
+| `Raspberry Pi 5 PCB` / `Pi5 GPIO pin 40` | Exact solid intersection | Clear |
+
+These are **six exact intersection checks and one broad-phase clearance**, all with zero reported overlaps, unchecked or skipped pairs, no truncation and no exhausted budget. They are selected checks at neutral, not an exhaustive swept collision analysis.
+
+The complete local machine-readable report is `target/selene/validation-final/validation.json`, schema `1.0.0`, 228,492 bytes, SHA-256 `0ccbf279f27885f6a4646a691a03915ca9ae22ae2f6bfef9574b856392474130`. It records every case, comparison, drive and interference result. The validator's SHA-256 is `b032962210e86a516193bd549d9137dcff93dbff4a3e038ca9a08de3493e1aac`. The repository's resource rules keep raw execution reports in ignored `target/`; the shipped validator and committed case selection reproduce them.
+
+The reproducible builder saves every completed stage, validates complete native command and timing traces, rejects timeline errors or warnings, requires unique live body names and checks the native joint graph. Resume verifies source, executable, recipe, result and checkpoint hashes. The independent validator opens the final saved file in a new process and checks requested values, follower values and world-coordinate measurements against separate calculations. It does not save its test poses over the master.
+
+The selected interference pairs in [motion/interference-pairs.json](motion/interference-pairs.json) are deliberately bounded. Any timeout, unchecked pair or failed command is incomplete evidence, not a clearance pass. They do not exhaust all body pairs or all simultaneous configurations.
+
+## Reduced-fixture evidence
+
+These checks were completed before integrating the corresponding production commands. Their scope remains local even when the same geometry is present in the full rover.
+
+| Subject | Actual evidence | Result and scope |
+|---|---|---|
+| Rolling-element kinematics | An arm bearing and a sensor-head bearing each driven by 30°; all eight relative ball spins and one orbital position checked in each case. | Arm cage 12.679558011° and relative ball spin −94.643843725°; head cage 13.360248447° and relative ball spin −135.576157538°. Maximum world orbital error 1.474 × 10⁻¹⁰ mm. Ideal no-slip relations, without contact-force simulation. |
+| Bearing clearances | Eleven core arm/bearing pairs and four head-retention pairs: 14 completed exact Boolean checks and one bounding-box exclusion. Core fixture: 288 bodies, 736 features, 117 components, 115 joints and 90 links. | No overlap reported and no pair unresolved after retries. Both fixture inventories have zero feature errors/warnings. These official v0.19.0 fixtures precede the production arm set-screw tips' final 0.05 mm extension; the named local pairs do not establish all-body or all-pose clearance. |
+| Raspberry Pi 5 | Official v0.19.0 fixture: 748 commands, 492 bodies and 1,202 features. Two analytic volumes, all 40 GPIO centers, six exact Boolean pairs and a separate broad-phase check of 26 major package envelopes. | PCB volume error 0.000514094% against a 0.01% tolerance; maximum GPIO center error 1.422 × 10⁻¹⁴ mm. No reported overlaps, unchecked pairs or timeline errors/warnings. Component layout remains a visual reconstruction. |
+| Gripper | Native checks at −15°, 0° and +18°, plus a 661-point analytic sweep at 0.05° and a continuous vertex/stationary-point separation bound. | Minimum jaw-to-jaw gap 5.735342 mm; minimum pad-to-pad gap 6.360460 mm. The local jaw envelopes remain in opposite half-planes over the continuous driver interval. Pin/sleeve radial clearance is 0.05 mm. This is a local gripper proof. |
+| Suspension | Retained-source-label fixture: 71 commands, 15 bodies, 43 features; both −4° and +1.5° endpoints; 12 pair-pose checks over eight unique pairs, including six exact Boolean intersections. | No timeline errors/warnings or reported overlaps; no unchecked pairs. Maximum slider-equation error 3.927 × 10⁻¹² mm and world center-of-mass error 1.973 × 10⁻⁹ mm. |
+| Yaw journals | Official v0.18.2 fixture: 101 commands, 20 bodies, 67 features; six support-only rotation cases, 44 pair-pose checks over 26 unique pairs, including 29 exact Boolean intersections; nine volume checks and 12 seating/distance measurements. | All cases passed; no timeline errors/warnings, unchecked pairs or reported overlaps. Maximum analytic volume error 0.0155823%, within the 0.02% tolerance. |
+| Integral glass vials | Official v0.18.2 fixture: 55 commands, six cups, one component and 49 features. The 22-command production subrecipe matches the validated recipe exactly. | Maximum analytic volume error 0.0080213%, COM error 0.000108088 mm and bounding-box error 0.000155825 mm. Each cup has one kernel shell; names, ownership, Glass material and opacity 0.30 are preserved. |
+
+The yaw fixture exposed an existing overlap of approximately 21.33 mm³ between each of four dish mounting screw heads and their stationary support. Four local reliefs remove those overlaps. The support-only fixture exercises arm/turret ±160° and dish ±150° to inspect the axisymmetric interfaces; the complete rover retains its narrower documented joint limits. Those local rotations do not expand the rover's accepted motion envelope.
+
+The journal supports have nominal 0.1 mm radial journal clearance, 0.15 mm radial pin clearance and 0.1 mm axial retention play. Display-mesh distance measurements of the tiny retainer gaps were 0.0644–0.0826 mm. These are mesh approximations; the nominal analytic dimensions and completed solid-interference results are recorded separately.
+
+The vial fixture also exported 57,264 native STL triangles. After coordinate welding at 10⁻⁶ mm, the mesh has six connected components and zero boundary, nonmanifold or inconsistent-winding edges, and zero degenerate triangles. Each vessel retains its 11.6 mm outside diameter and 27 mm height, with a 0.8 mm wall and 1 mm integral floor. Its fixture SHA-256 is `76f0cb4e25e7beb2f04a1ccd84619144441f9d580129f0325c29ef8d774ef2a6`; detailed evidence is in `target/selene/vial-repair/validation-report.json`. Mesh closure does not establish physical dielectric renderer support.
+
+Two initial bearing checks exhausted their eight-second budgets. With 30-second budgets, the shoulder-clevis/outer-race check completed in 12.122 seconds and the ball/inner-race check in 10.382 seconds, both clear. The original timeout reports remain alongside the successful retries. Their initial zero-overlap counts were not accepted as passes.
+
+The electronics and core bearing fixtures use official v0.19.0, format 30; they are development fixtures, not the distributed master. Their production commands were subsequently replayed in the complete rover with v0.18.2. The retained-label suspension fixture's SHA-256 is `1da6c92ba9ff2c421dc5b475f9971b458d3d43bbb048147df0cdeb70fefb9a11`; the yaw fixture's is `65ba6b033e301bd6cc4c91caa31d2ea67c69064d970355ff0597609adc62efcd`. The unchanged electronics generator is `67a69a7e613ad59dcf474dc6ecd9d9fb8439aa193e2e2ee458c282b65186fd9d`; its fixture is `578d9ba7b00738552ef9201c57489520fd86275c7fcfa23818adcdaed07aae04`.
+
+Local report locations in a development checkout are `target/selene/bearings/compact-phase-report.json`, `target/selene/bearings/review-gripper-presentation.json`, `target/selene/electronics/validation-report.json`, `target/selene/suspension/retained-labels/validation-report.json` and `target/selene/yaw-support-audit/validation-report.json`. Detailed generated logs, fixture files and diagnostic images stay outside the production asset package.
+
+## Image evidence
+
+The compiled personal fork reopened the complete final master and generated three actual **1400 × 1000 native Design PNGs**. All three were visually reviewed and are shipped under `exports/`. The overview shows the neutral rover, the electronics view exposes the connector mouths and populated board, and the bearing view isolates its races, balls and cage. The capture opened all 2,116 bodies with a clean timeline and left the master hash unchanged.
+
+| Shipped preview | Bytes | SHA-256 |
+|---|---:|---|
+| [SELENE-overview.png](exports/SELENE-overview.png) | 423,686 | `44d317ca9b0f77c3ac5d43409f0b6b281b9d6724d58a3c8edd8ca2db19a0bc63` |
+| [SELENE-electronics.png](exports/SELENE-electronics.png) | 225,933 | `cd8af0700ce6a4cc0aa00bdfa5d246e4b3ed491847795636c65d9a8ead45991e` |
+| [SELENE-bearing.png](exports/SELENE-bearing.png) | 284,094 | `ed3a3da01946019c9c380bf8515013eca3a05c7bf5161ff4bb98ee36eb5ef92b` |
+
+The native capture metadata identifies the CPU rasterizer and its expected warning: surface-analysis colors, highlights and legends are not drawn. These previews do not claim physical PBR or transmission. Cameras, executor hash and capture metadata are recorded in `target/selene/final-previews/export-report.json`; [tools/export_views.py](tools/export_views.py) reproduces the three selections without saving transient visibility or camera changes over the master.
+
+Two actual `cpu-product` renders from the compiled personal fork passed preflight and image generation with no warnings: a single bearing fixture (20 visible bodies, 93,654 triangles) and the Pi isolated from the integrated rover checkpoint (504 visible bodies, 103,004 triangles). Both outputs were 768 × 576 PNGs and were visually inspected. The bearing is a reduced fixture; the electronics image uses actual integrated geometry. See [RENDER.md](RENDER.md) for exact resource estimates, rendering scope and limitations.
+
+The complete rover exceeds this revision's 262,144-triangle CPU product admission limit. The 64 arm-bearing balls alone contain 654,336 reference-mesh triangles. That code path has not produced a whole-rover PBR image. Native Design previews and bounded product renders are different evidence.
+
+## Repository checks
+
+The catalog and prepared-resource validators passed with the source status `pinned_native`. The wider scene catalog intentionally remains `runtime_ready: false`: the native model's completion does not bind every proposed stage, material role or future dynamics event.
+
+The required repository-wide `cargo xtask ci` command was attempted with Rust 1.95.0 and the required socket permissions. Formatting, asset attribution, icon checks (17 tests), license checks, generated lists and dependency-layer checks (17 crates) passed. CI then stopped at a pre-existing `clippy::nonminimal_bool` diagnostic in `crates/geom/src/fill_general.rs:166`, under `-D warnings`. That application source is unchanged by this work. Later workspace tests and WebAssembly checks were not reached. The whole repository gate is therefore **not green**; the successful native CLI build and asset checks do not replace it.
+
+The final `cargo xtask ci` attempt, after adding the shipped master and all three previews, reproduced that same baseline Clippy failure. Its exact output is retained locally in `target/selene/ci-final.log`. Its asset and icon gates passed. The catalog and prepared-resource validators also passed with zero errors, and the final whitespace check was clean. No application Rust source is changed by this package.
+
+## Resource failures and recovered attempts
+
+The working environment has an 8 GiB memory limit. Three earlier native attempts were killed for exceeding it: one overlapped a second cold full-model open; two involved late renames of original suspension bodies. Late original-body renames forced a long history rebuild while prior evaluated state remained resident. The production recipe retains those original labels and splits suspension geometry into smaller saved stages. Geometry, ownership and joint intent remain explicit.
+
+Full-model native processes now run sequentially. The provided tools set two native worker threads and an allocator policy of `MALLOC_ARENA_MAX=1`, `MALLOC_MMAP_THRESHOLD_=65536` and `MALLOC_TRIM_THRESHOLD_=65536`. These are process-memory settings, not geometry simplifications. Failed attempts and their logs are retained under `target/selene/failed-attempts/`; they are not counted as successful validation.
+
+Strict container inspection also rejected one intermediate suspension checkpoint because the inherited tour still referenced the original wheel joint ID after wheel reparenting. The builder now refreshes that study by exact joint names before saving the suspension checkpoint. The corrected stage completed with 172 components and 180 joints, and the rejected file remains diagnostic evidence only.
+
+The first presentation attempt failed at the original touching vial-wall/bottom union and saved no presentation checkpoint. The validated replacement removes each split pair and creates an envelope with a blind bore, retaining the original wall name, external dimensions, component and appearance. Its base coordinates account for the source's already baked `Move9` translation. The failed union log remains under `target/selene/failed-attempts/vial-touching-union/`.
+
+## Remaining physical and animation scope
+
+The rover is an editable geometric and kinematic showcase. The rolling bearings use ideal linked revolutes; the suspension uses rigid links and a closed pin–slider–pin loop. Neither provides contact forces, spring dynamics, damping, backlash, stress, fatigue or a rated load capacity. Fasteners have nominal seats rather than fully modeled thread engagement.
+
+The six rigid spring solids and twelve motor leads remain neutral-pose render details and must be hidden for suspension movement. The motion visibility profile handles this. Flexible hose display geometry and rigid decorative arm hydraulic cylinders are excluded from the relevant moving presentation.
+
+The Pi is an original visual reconstruction based on cited public mechanical dimensions. It is not manufacturer CAD, a PCB netlist, exact component artwork or an electrical design. Opaque PBR parameters are authored appearances; nominal material density does not establish measured mass, thermal behavior or friction. Glass viewport opacity is not a physical transmission model.
+
+The adapted legacy tour and seven focused studies are animation authoring resources. Their presence does not certify every frame, every combined pose, obstacle clearance or a future throw-and-catch sequence. Those checks belong to the specific animation shot and any physical simulator chosen later.

assets/render/selene/licenses/UFL.txt

@@ -0,0 +1,96 @@
+-------------------------------
+UBUNTU FONT LICENCE Version 1.0
+-------------------------------
+
+PREAMBLE
+This licence allows the licensed fonts to be used, studied, modified and
+redistributed freely. The fonts, including any derivative works, can be
+bundled, embedded, and redistributed provided the terms of this licence
+are met. The fonts and derivatives, however, cannot be released under
+any other licence. The requirement for fonts to remain under this
+licence does not require any document created using the fonts or their
+derivatives to be published under this licence, as long as the primary
+purpose of the document is not to be a vehicle for the distribution of
+the fonts.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this licence and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Original Version" refers to the collection of Font Software components
+as received under this licence.
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to
+a new environment.
+
+"Copyright Holder(s)" refers to all individuals and companies who have a
+copyright ownership of the Font Software.
+
+"Substantially Changed" refers to Modified Versions which can be easily
+identified as dissimilar to the Font Software by users of the Font
+Software comparing the Original Version with the Modified Version.
+
+To "Propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification and with or without charging
+a redistribution fee), making available to the public, and in some
+countries other activities as well.
+
+PERMISSION & CONDITIONS
+This licence does not grant any rights under trademark law and all such
+rights are reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of the Font Software, to propagate the Font Software, subject to
+the below conditions:
+
+1) Each copy of the Font Software must contain the above copyright
+notice and this licence. These can be included either as stand-alone
+text files, human-readable headers or in the appropriate machine-
+readable metadata fields within text or binary files as long as those
+fields can be easily viewed by the user.
+
+2) The font name complies with the following:
+(a) The Original Version must retain its name, unmodified.
+(b) Modified Versions which are Substantially Changed must be renamed to
+avoid use of the name of the Original Version or similar names entirely.
+(c) Modified Versions which are not Substantially Changed must be
+renamed to both (i) retain the name of the Original Version and (ii) add
+additional naming elements to distinguish the Modified Version from the
+Original Version. The name of such Modified Versions must be the name of
+the Original Version, with "derivative X" where X represents the name of
+the new work, appended to that name.
+
+3) The name(s) of the Copyright Holder(s) and any contributor to the
+Font Software shall not be used to promote, endorse or advertise any
+Modified Version, except (i) as required by this licence, (ii) to
+acknowledge the contribution(s) of the Copyright Holder(s) or (iii) with
+their explicit written permission.
+
+4) The Font Software, modified or unmodified, in part or in whole, must
+be distributed entirely under this licence, and must not be distributed
+under any other licence. The requirement for fonts to remain under this
+licence does not affect any document created using the Font Software,
+except any version of the Font Software extracted from a document
+created using the Font Software may only be distributed under this
+licence.
+
+TERMINATION
+This licence becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
+COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER
+DEALINGS IN THE FONT SOFTWARE.