The housing's change at the new pin (81 faces, 15111.545 mm3 against its answer
15138.533, from solidcore#2735) is a regression the gate should show, not record:
filed as tangency-labs/solidcore#2908.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bisected over solidcore's first-parent history 5d2635d36..9856ffee5 with SolidCraft's fixes:
the rim cut's extra face comes with the exact surface extension (a6314d4b3 or f4e0ec2d0,
solidcore#2769), the basin's shell with the offset's exact extension margin (4d2b4d35a or
95192d385), and the ladder housing's change with solidcore#2735, which makes the M16 groove
cut grazing the boss's root round valid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The merge queue's run (this pin on today's main) builds the r3 round into the r2 round
within the closed form's tolerance, so the line #11875 added goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rim cut after the far-end round (one face more), the basin's shell (status 1001) and
the whole-body intersection's small round (no closed outline). The first two pass at
5d2635d36, so they come from solidcore after it; the third fails at 5d2635d36 too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The variable round r 2 to 5 along a box edge builds its closed form at the new pin, as
blend_variable::tests::variable_radius_on_a_box_edge does since #11875's pin: its
known_failure goes. The other 89 reference cases are as before (87 pass, 2 known).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pass at the new pin, off the list: the four issue_851 two-round cases,
a_round_next_to_a_round_of_another_radius, a_propagated_chain_that_cannot_build_says_how_to_blend_the_edge_alone
and fillet_takes_exactly_the_picked_edges (the smooth-vertex End solidcore#2364 brought is gone).
The ladder golden is main's again for 07-fillets/012 and 021, which build as at 8ddce9016;
11-cumulative-parts/004-housing is recorded failing at the new pin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
fillet_refuse_rounds_breaking_through now refuses one fillet rig case that builds with it
off (1668-fillet-both-sides-of-thin-wall-r7, closed form 39509.938), down from 11 at
8ddce9016; the other 270 cases come out the same. fillet_round_ends_on_outline fails the
same tests with the same numbers as at 5d2635d36. Both stay off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1080-fillet-notched-block-top-outline-r8, 1207-fillet-box-end-edge-into-unblended-round-partial-chain,
5158-fillet-adjacent-plate-edges-as-thick-as-plate and
every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain meet their continuity
again: the smooth-vertex End solidcore#2364 brought is gone from them at the new pin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#12171 reworded the refusal ("moving Notch to position 0 breaks Notch ..."), so the
history case fails on every pin bump, which runs every rig area. This is raykholo's
one-line change from #12392, identical, so either can land first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At 9856ffee5 solidcore puts the four r 3 rounds back when the top of the 40 x 30 x 10
box moves down 9 (refused before, solidcore#2020): 6 faces and the closed form's volume
within 1e-6, as at -8 and -9.5. The test takes -9 with the other moves instead of
expecting the refusal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
jyviko's lists for the pin before this one: the six tests and the rig case 5d2635d36
fixed are off the lists, its regressions are on them with the solidcore PR that made
each, and the ladder's 07-fillets/012 and 021 are re-recorded. Re-measured at 9856ffee5
in the commits after this one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both crates now come from the same solidcore commit. Builds on #11875 (jyviko), which
moved the pin to 5d2635d36: its compile fixes (the per-kernel blend serial ranges go,
solidcore#2480 keys the station memo by definition) and its fix choices carry over.
Compile fixes for the newer API:
- Offset refusals are typed (solidcore#2654): a fold is OffsetFailure::Folds, walls
touching and a vanishing edge are read from the error's kind.
- The fitted surface extension is gone (solidcore a5de86aaf, issue #2730): extend_sheet takes solidcore's
exact extension (extended_by_distance) instead of solving for the distance to ask.
Flags: the six solidcore retired into its defaults leave fixes() (fillet_blend_corner,
fillet_round_on_round_as_definition, fillet_nx1_tangent_side_edge_same_convexity,
gap_array_append_updates_longest, masked_array_uses_bit_shift,
hash_table_grow_preserves_removed_records); the two new ones are on
(brep_ray_classifies_current_trims, revolution_frame_from_profile_origin).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #12041
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Plane at Angle: use axis direction only with a pivot (#12041)
Add a direction_only option that projects the axis onto the base and
turns about a pivot (or the base origin), with dialog checkbox and
conditional Pivot pick. Older designs keep turning about the full line.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* i18n: add ar, he, vi for Use axis direction only (#12041)
Complete catalogs need every English message; the pending locale file
was missing those three so cargo xtask i18n --check failed.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Sketch Break and Extend: tests for a cut or stop on a center rectangle's centre
Breaking a center rectangle's diagonal at the centre leaves two points there, and extending a line up to the centre ends it on one diagonal only. These tests fail on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Break and Extend: a cut or stop on a held midpoint ends there, as Trim does
Break dropped the broken line's Midpoint and joined the pieces at a new point held only on the cutter, so a center rectangle's centre came loose and a corner drag pulled the two points apart. It now uses Trim's rule (one helper, hold_cut): the pieces meet at the held point, which moves its hold to the cutter's middle when the sketch already implies that, and otherwise stays on the cutter.
Extend stopped on a point it lays on the curve it meets unless that curve ends there. A point held at another line's middle (a center rectangle's centre) is now a stop too, so the extension joins it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2364
* Sketch Dimension: an origin axis can be picked as a reference (#2364)
The dimension tool ignored clicks on an origin axis and the engine's
sketch.dimension did not resolve x/y. Axis picks now map to the sketch's
linked axis line, as Symmetry and the other line constraints already do,
in all three entry points (click-then-pick, select-then-D, and the command).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: tests for a circle centre and a line against the sketch axes (#3137, #3320)
Folds in the cases from #3298: a circle's centre point dimensioned to the
x / y axis (#3137), and a line's angle and an end's distance to the x axis
(#3320). The axis resolution from #2364 already covers them; a plain circle
or arc with a line still measures to its edge (#1803).
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: the axis test picks the line off its midpoint, which is a point pick (#4872)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Fillet, Chamfer, Offset Face (and Press Pull on a curved face, which opens
it), Draft, Replace Face and Delete Faces sent only the picked points. The
feature then checked every body's edges for them and evaluated on the body
whose mesh box is nearest the first point (`body_at`):
- In an assembly, a bore or pin inside a housing that comes first in the
body list was looked for on the housing, which has no face there, and the
command failed with "no face at [...]".
- In a large design, `body_at` meshed every body (and Fillet/Chamfer worked
out every body's edges) on each preview and apply: seconds per change.
These dialogs now name the body when every pick lies on one, as Shell does
since #4555; picks on several bodies name none, as before. Press Pull passes
a given body on to Offset Face.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7476
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Create Sketch: the flat faces of a cone take an attached sketch (#7476)
The cone primitive was evaluated as an unnamed tool, so its faces had
only geometric names, which a face attachment refuses as not exact.
Its faces are now named from the revolve that builds it, as a
cylinder's are: `bottom`, `side` and, on a cut-off cone, `top`. A
sketch on its base or top attaches by that history name and follows
the cone's height.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fix compile after the layer split
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: Mesh export: mesh bodies in parallel and weld seams through a grid
* Mesh export: mesh bodies on threads and find seam splits through a grid
STL, OBJ and 3MF exports meshed and welded one body after the other on
one core. Each body is now meshed (and welded) on its own thread with
map_on_threads, as the model cache encodes them; results stay in body
order and every body is welded on its own, so the files are the same,
byte for byte. Of several failing bodies the first one's error is the
export's, as before.
The search for vertices lying on open sides (T-junctions) looked at
every open-side vertex for every open side. It now bins those vertices
on a grid and looks only in the cells around each side; the vertices it
finds come out in the same ascending order, so the splits are the same.
A side whose box spans more cells than there are vertices, or that is
not finite, still looks at all of them. A test compares the result with
the previous all-pairs search (kept in the test module) on a cube meshed
at six resolutions per face with jittered vertices and broken triangles.
ASCII STL and OBJ write each line into the text instead of formatting
a string per line and appending it (same bytes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fix compile after the layer split
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
canvas.insert, canvas.decal, canvas.edit, canvas.calibrate and canvas.delete
now publish typed input and output schemas. Each parameter is read the way
the handler reads it today and refused with the handler's own message, and
the replies are built from the same types the output schemas describe, so the
JSON they return does not change. Their lines leave unconverted.txt.
The plane check of sketch.create's plane reader is split out so the canvas
contract can use it without changing what it accepts.
Part of #2829.
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: sketch font is included in vendored sources (#12162)
Co-Authored-By: Codex <noreply@openai.com>
* fix: include the sketch default font in vendored sources
Co-Authored-By: Codex <noreply@openai.com>
---------
Co-authored-by: Codex <noreply@openai.com>
* claim: #12313
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Plastic rules: input and output schemas for Manage, Assign and List Plastic Rules (#12313)
The three plastic rule commands get typed contracts and replies, in a
new `schema/plastic.rs` laid out like the sheet metal rules', and leave
`schema/unconverted.txt`.
- Each key reads as its handler reads it, with the handler's message:
the rule name as `plastic.manage_rules` trims and limits it, `bodies`
through `config::NameList` (which mirrors `params::string_list`), the
ten rule values as `LengthExpr` and `AngleExpr`.
- `name` and `bodies` are optional in the types and required in the
schemas (a `require` transform), so a call without them still gets
the handler's own message.
- Keys of the wrong type that the handlers ignore today (a non-boolean
`active` or `delete`, a rule value that is neither a number nor text,
a non-text `from`, `material` or `rule`) are refused; in warn the call
still works, with a warning. A test pins each one.
- The handlers build their replies from the reply types through a small
`typed_reply`; the JSON is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assign Plastic Rule: the schema's `bodies` is a name or a non-empty list, not null
The field is `Option<NameList>`, so its published schema allowed `null`
(from the `Option`) and an empty list (from `NameList`), both of which
the handler refuses ("`bodies` must list bodies"). It now has its own
schema: a name, or a list of 1 to 10 000 names. The reader is unchanged,
so strict still gives the handler's message for those calls. The schema
test adds both cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
component.insert_design, update_links, relink, break_link, links, extract,
copies and replace_with_link now publish typed input and output schemas.
Each parameter is read as its handler reads it today, with the same error
messages, and each reply is built from the typed value and serializes to the
same JSON as before. Their lines leave unconverted.txt.
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11039
* Insert SVG: shapes a file only defines or hides are not imported (#11039)
read_svg drew every shape it met, whatever its parents were, so a circle
inside defs, clipPath, mask, symbol, marker or pattern, or one hidden by
display: none, became a sketch curve a browser never shows (and could
punch a hole in an extrude). Those elements and their contents are now
skipped; the stack still follows the end tags, so what comes after reads
as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* The command reference: the parameters as a table, with their type and whether they are required (#5237)
The command reference shows each command's parameters as one raw line of
registry notation, so a reader has to read it as code to learn what a
command takes. The generated page now lists the same parameters as a table:
the name, the type, whether the command needs it, and what the registry
says about it. The complete parameter text stays in the automation details,
so nothing is lost for the scripts that read it.
The table is generated from the command registry, like the rest of the page,
so it cannot drift from the commands. The notation is read by a small parser
that knows what the registry writes: names written apart share the type
that follows them, a question mark marks a parameter optional, a pipe
between names offers alternative names for one parameter, a pipe after the
colon lists the types it accepts, a parenthesis says what the parameter
does, and the text after an arrow is the reply the command gives, not a
parameter.
Co-Authored-By: Claude <noreply@anthropic.com>
* test: the parameter table keeps its description literal
The parameter table shows registry text, so a description that carries
inline Markdown must be shown literally: backticks, emphasis and links
are characters, not syntax.
The type of a parameter ends where its sentence ends, so the sentence
that follows it is not part of the type.
Both tests fail on the current code.
* fix: render the parameter description as prose
The description cell of the parameter table is registry text, and the
rest of the file already renders registry text with prose(): backticks,
emphasis and links are characters, not syntax. table_cell() only kept
the table and the page intact, so a description like `#name = expression`
came out as a code span and a description with `*bold*` came out as
emphasis.
The name and the type keep table_cell(): they are identifiers and
notation, and they are not Markdown prose.
* fix: cut the parameter type at the end of the sentence
A type runs to the end of the clause, so the sentence that follows it
belongs to the command, not to the type: `construction?: bool. Returns
sides {bottom, right, top, left}` showed the whole sentence as the type
of `construction`, and the description of `sides` with it.
The type now ends at a full stop followed by a space and a capital
letter. A dotted or multiword type such as `sketch.rectangle` or
`number or expression` does not match that pattern, so it keeps its
current handling.
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11941
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* User parameters: input and output schemas for Add, Rename, Delete, Comment, Favorite and Move (#11941)
describe_command now gives the exact parameters and reply of the six
commands that manage a design's user parameters by name, and the warn
and strict parameter checks use them. The handlers read their
parameters from the raw JSON, so the contracts in the new
schema/parameters.rs read each key as its handler does, with its
message; `value` stays as parameters.add's other name for `expression`,
and `comment` is required in the schema but left to the handler's
message in the type. The replies are built from typed values instead of
json! literals, with the same JSON; parameters.add's reply flattens an
untagged AddedValue (a number's value or a text parameter's text).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the schemas count a `null` expression and Move's neighbour as left out
`parameters.add` reads a `null` `expression` or `value` as left out
(`expr_arg`), so the schema's "expression or value" alternatives now
also need the key's type (number or text): `{"expression": null}` alone
no longer matches, while `{"expression": null, "value": 3}` does.
`parameters.move` needs exactly one of `before` and `after`. The schema
now says so with a `oneOf` whose alternatives each need their key as
text, so a `null` neighbour (read as left out) counts as neither, and
both or neither is refused. `conforms` doesn't read `oneOf`, so the test
pins it and counts the matching alternatives itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
- timeline.redefine maps a surface revolve's {origin, dir} axis through an edit-only table entry
- a new surface revolve still goes whole through to_active_frame (picked edge and face axes)
- tests: made and edited in a moved and a turned component against the solid revolve; a picked edge axis
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #12155
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Motion studies: input and output schemas for Motion Study, List and Delete (#12155)
describe_command now gives the exact parameters and reply of
motion.study, motion.list and motion.delete, and the warn and strict
parameter checks use them. The handler reads its parameters from the
raw JSON, so the contracts in schema/motion.rs read each key as it
does, with its message (a study by id or name, steps, and keys of
[step, value] points); whether the study, joint and value exist stays
the handler's to check. The replies are built from typed values
instead of json! literals, with the same JSON, through `typed_reply`
(the contact commands' helper, renamed now that it serves both);
motion.list's traces stay as motion_trace.rs builds them.
The parameter audit found two tests in cmd/motion_tests.rs sending
`delete: true` to motion.delete, a key only Edit Contact Set takes; a
`deletion` helper now sends it only there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Motion Study: a point's step must be a number in the schema, as the handler reads it
The schema typed both elements of a key's point as "a number or text",
so `["0", 20]` matched it although the handler refuses a step that isn't
a number ("points are [step, value]"). The two are now typed apart with
`prefixItems`: the step a number, the value a number or an expression,
each under 1e9 in size, as `study_key_problem` and the handler read them.
Elements after those two, which the handler ignores, are left free.
The 1e9 limit, written twice in the key check, is now the named
`MAX_POINT_MAGNITUDE`, used by the check and the schema alike. A new test
checks nine point shapes against both the schema and the key check, so
the two can't drift apart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #12222
* Web app: clippy for wasm passes with -D warnings (#12222)
cargo clippy -p solidcraft-web --target wasm32-unknown-unknown stopped at
drop(file) in safe_write.rs and showed 12 more warnings only that target
has. Each is fixed where it is:
- safe_write::create_atomic and control_auth::write_token_file_with close
their File by scope (a block; Result::map's closure) instead of drop(),
which clippy's drop_non_drop flags where File is a stub.
- Native-only imports, the AHEAD constant and the point-cloud worker's
Condvar are behind cfg(not(target_arch = "wasm32")); Exported::bodies
and Start::Later, read or built only natively, allow dead_code there.
- home::ask_present uses ctx in its browser branch; the browser blur stub's
begin returns a Scope, as the native one does.
- The web app drops three map_err(JsValue::from) on dyn_into's error,
which is a JsValue already.
Native builds behave the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
browser.collapse_all, browser.expand_all, browser.group, browser.move,
browser.order, browser.rename_group, browser.ungroup, browser.visibility
and body.rename now publish input and output schemas, so agents and
scripts can read exactly which parameters they take and what they
return, and the warn and strict parameter checks cover them.
Each parameter is read the way the handler reads it today, with the same
error messages. The replies are built from typed values and serialize to
the same JSON as before. Part of #2829.
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Extract a component whose body was built in another component
component.extract now takes along the outside features that built, changed or moved
in a body the component owns, when they touch nothing that stays outside. Otherwise
it names the feature that blocks it. Fixes#12142.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel case: extracting a component with a body moved in now succeeds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11766
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render presets: input and output schemas for the native studio and quality profile commands (#11766)
describe_command now gives the exact parameters and reply of
render.preset.resolve and render.preset.apply (review and apply a
native studio composition) and render.quality.prepare (review a fixed
sampling budget), and the warn and strict parameter checks use them.
The handlers already read their parameters with strict serde types;
those types move to the new schema/render_presets.rs, gain descriptions
and JsonSchema, and become the contracts. The replies are built from
typed StudioComposition and QualityPlan values instead of json!
literals, with the same JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render presets schema: `set` names the setup's fields
As on #11762 and #11742: `patched_settings` reads a `set` patch onto
the saved setup as a RenderSetup, which refuses unknown fields, so the
schema now names the setup's 14 fields with additionalProperties false
(still at most 13 at once). A new test covers it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11862
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Physical materials: input and output schemas for New, Edit, Inspect and Delete Physical Material (#11862)
describe_command now gives the exact parameters and reply of
material.create, material.edit, material.inspect and material.delete,
and the warn and strict parameter checks use them. The handlers read
their parameters from the raw JSON, so the contracts in the new
schema/materials.rs read each key as its handler does, with its
message: `null` keeps its meaning (`color: null` and `physical_card:
null` clear), the look keys reuse the appearance commands' types, and
the card keeps the handler's own check, with its schema from
schema/material_properties.rs (whose card_schema becomes pub(super)).
The replies are built from typed values instead of json! literals, with
the same JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Colour schema: a colour's text form allows what color_param reads
inspect::color_param trims the text and drops any number of leading
`#`, so " #ff00ff " and "##ff00ff" are colours to appearance.assign
and the material commands, but ColorParam's published pattern refused
them. The pattern is now built from schema::types' whitespace class (as
AxisDir's is), which becomes pub(crate), and a test pins it next to the
reader's answers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Colour pattern: a byte may be `+` and one hex digit, as the reader takes it
`inspect::color_param` parses each of the three bytes with
`u8::from_str_radix`, which accepts a leading `+`, so "+fff00" is read as
[15, 255, 0] today. The schema's pattern asked for six hex digits and
would have made strict refuse a colour the handler accepts. The pattern
now allows either two hex digits or `+` and one digit per byte, and the
test pins both the reader's answer and the pattern's text, since
`conforms` doesn't read patterns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11761
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render HDR: input and output schemas for Inspect HDR Source and Save Render Settings with HDR (#11761)
describe_command now gives render.hdr.inspect's and
render.settings.capture_hdr's exact parameters and reply, and the warn
and strict parameter checks use them. The handlers already read their
parameters with strict serde types; those types move to the new
schema/render_hdr.rs, gain descriptions and JsonSchema, and become the
contracts, so the check is no stricter than the handlers. The replies
are built from typed HdrInspected and HdrCaptured values instead of
json! literals, with the same JSON. `expected_sha256` is the doc crate's
HdrId, whose schema is written by hand (64 lowercase hex digits or null).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render HDR schema: `set` names the setup's fields, and its job may be the saved one's
`patched_settings` puts a `set` patch's keys onto the saved setup and
reads the result as a RenderSetup, which refuses unknown fields. The
schema now names the setup's 14 fields with additionalProperties false
(still at most 13 at once), so `set: {"widht": 10}` is refused, as the
handler refuses it; the values stay the handler's to check. The
description now says the setup the changes make (a saved one keeps the
fields left out) needs a cpu_raytrace or gpu_path job, not that every
patch must give one. A new test covers the field names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11375
Co-authored-by: Cursor <cursoragent@cursor.com>
* Web: tab title follows a renamed design (#11375).
When an OPFS design is renamed, open tabs keep the new path and a borrowed design name so the tab matches the file list.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #11088
* test(ui): cover Paste New into a selected parent
* test(ui): use SolidCore Vec3 in clipboard regression
* test(ui): verify copied face attachment through menu
* style(ui): apply clipboard test formatting
---------
Co-authored-by: ermanyop-stack <278786764+ermanyop-stack@users.noreply.github.com>
Document::placements scanned every occurrence for each component it visited,
so its cost was placements times occurrences, on every world placement. The
new OccurrenceTree (crates/doc/src/occurrence_tree.rs) lists each component's
children once, in one pass and in document order; placements walks it with
the same order, caps and stop behaviour, through placements_with, which takes
each occurrence's transform from the caller. inside_component reads the same
index instead of scanning per component.
Tests compare the walk with the scanning one on 13 shapes and on hostile
generated documents, at its caps, in document order and with a given
transform. Release, 97,540 placements: about 120 ms -> 15.5 ms, the same in
either run order (docs/perf.md).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* timeline.reorder: say when nothing moved, and return the new index (#12140)
A position past the end was capped to the last slot; when the feature was
already there the command reported success with no sign nothing moved. The
reply now gives position (index now), from and moved, with a note that says
why nothing moved or that the last slot was used. A move that puts a feature
ahead of what it uses says so, and the command refuses before changing the
design if the feature would not land at the asked position.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* timeline.reorder: word a refused move by its direction; note a marker-only change
A feature moved later can fail for reasons other than order, such as a cut that
removes its body, so the move-earlier hint is given only when it moved earlier.
With `active`, a feature left in place gets a note saying only the history
marker moved, or that nothing moved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: offline script marker diagnostics for #3956
Co-Authored-By: Codex <noreply@openai.com>
* Report script build markers in offline web test timeouts
Expose the existing started and shared dataset markers in diagnostic state. Preserve missing markers as null without changing readiness or retry behavior.
Co-Authored-By: Codex <noreply@openai.com>
---------
Co-authored-by: Codex <noreply@openai.com>
* Arabic: one spelling of component in the Browser rows start closed note, dialog wording in the tab-close tip
* Arabic: no direction marks in the MCP compact output note
* Arabic: general term for the surface grain angle, Output name in the image import note and the Output inspector header
* Arabic: one word for the mouse in the right-click notes of the intersection curve pick and the Play History button
* Arabic: bridging term in the Hole dialog, intersection curve help pronoun, ground shadow tip wording
* Arabic: pan term in the drag-keeps-mode help and the vertical pan direction option
* Arabic: Move Sketch Points name, Move tool name in the drag highlight preference, file format wording in the newer-file notices
* claim: Parameter Sweep's schema requires parameter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter Sweep: the schema requires `parameter`, as text
`inspect.parameter_sweep` refuses a call without `parameter`, or with a
`null` or numeric one ("`parameter` is required (parameters.list)"), but
its published schema (#10978) neither required the key nor ruled out
`null`: the field's `#[schemars(required)]` has no effect on a key with
`serde(default)`, and `Option<String>` publishes `["string", "null"]`.
The contract keeps the key optional in its type, so the handler, not the
check, gives its own message when it's left out; the schema now requires
it through a struct-level transform, as the contact commands do, and
types it as a string. A new test checks the schema against a call
without the key, with `null` and with a number; it fails without this
change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Sketch modify: name the public command in the split and trim errors (#4712)
Part of #4712.
The split inside the sketch modify tools refused in the name of the
internal `split` step, and the free-form trim in the name of the
internal `trim` one: `invalid parameters for `split`: a circle needs
two points to split at` names a command nobody can write, so an agent
or script reading the message has nowhere to go.
Both now name the public command the caller used: `sketch.modify` for
the split shared by trim and break, `sketch.trim` for the trim. The
descriptions are unchanged.
Co-authored-by: Hermes Agent <noreply@anthropic.com>
* Sketch modify: the split names the command the caller used (#4712)
`sketch.modify` is not a command a caller can write: the registered
sketch commands are `sketch.trim`, `sketch.trim.path` and `sketch.break`.
The split shared by trim and break therefore refused in the name of a
command that does not exist, and a script reading the message had
nowhere to go.
`split_at` takes the command of its caller and refuses in that name:
`sketch.trim` when the trim splits the curve, `sketch.break` when the
break does. Both callers already had the command in hand.
The test now states the decision: the refusal of `sketch.break` carries
`sketch.break`, and the rendered text names no other command.
Co-authored-by: Hermes Agent <noreply@anthropic.com>
---------
Co-authored-by: Hermes Agent <noreply@anthropic.com>
* Extrude: Two Sides keeps each distance on the side Direction gives it
Distance 2 stays on the side Direction gives it, whatever the sign of Distance 1, and its value box shows on the canvas. Rebased onto main as one change.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Two Sides extrude: keep older designs' sides by a marker, and the full profile search
- A saved two-sided extrude is marked `second_follows_first` instead of having a literal
negative distance rewritten: expressions such as `-width` keep the old sides when their
parameters change, `-0 mm` keeps its span, and a feature's named inputs keep their values.
- Live sketch drags and the restored model cache use the full profile search evaluation uses,
so a sketch whose only closed boundary is projected keeps its profiles.
- The canvas Distance 2 box stays while its text does not evaluate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: give the extrude added on main the second_follows_first field
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Appearance: theme picker with carousel, grid, filters and Day/Night slots
* Appearance: theme picker arrows move a screenful of themes
* Theme picker: translations, token metrics, wheel helper in navigation, reveal tolerance
* Theme picker: keep both new Appearance preferences after the rebase
* Appearance: adapt theme picker to egui 0.37
* claim: #2398
* Extrude: the distance arrow stops at a parallel face and outlines it (#2398)
While Extrude's distance arrow is dragged, a flat face parallel to the
profile and lying over it takes the distance exactly once the tip comes
within 8 screen points of its plane, and the face is outlined as a hovered
face is. A cut dragged through a block so stops at its far side. Faces
beside the profile don't catch the arrow; Alt/Ctrl (free drag) turns it off.
The distance stays a number in the existing parameter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude face stop: clippy (test-only current, +=)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude face stops: a preference, on by default, keeps the old round steps (#2398)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude face stops: follow world_state returning a Result (#2398)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude face stops: import Vec/Plane from solidcore_record after the layer split
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* joints: support custom names in dialog and type-based default names
Allow users to specify a custom name in the Joint dialog and generate
type-prefixed default names (e.g. "Planar Joint1", "Revolute Joint1")
instead of generic "Joint{n}".
- Add `name` field to `JointForm` and display a text row in the Joint
dialog with a dynamic placeholder matching the chosen type.
- Update `new_joint_name` in `cmd/joints.rs` to take `JointKind` and
prefix auto-generated names with the joint kind label.
- Prioritize non-empty custom names and pass them through `joint.create`,
`joint.as_built`, and `joint.edit`.
- Pre-populate the existing joint name in `edit_joint` to allow renaming
directly from the Edit Joint dialog.
* joints: add tests for custom and type-based joint naming
Verify that the joint dialog and engine command layer correctly generate
type-prefixed default names and respect user-specified custom names.
- Add engine-layer test `new_joints_generate_type_prefixed_names_or_keep_custom_name`
to verify `joint.create` and `joint.as_built` naming logic.
- Add UI-layer test `joint_dialog_applies_custom_name_or_falls_back_to_type_default`
to ensure the `JointForm` captures and submits names correctly.
* Format dialogs_assembly_tests.rs (trailing blank line)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8256
* Add initial Bulgarian translation (114 keys)
* Delete claim.txt
* Delete translate.py
* Delete assets/locales/bg.json
* Restore the bg catalog the locale list needs, fix indent
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bulgarian: translate the strings the catalog tests require, drop ids that no longer exist
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10963
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Copy, Cut and Paste: input and output schemas (#10963)
sketch.copy, sketch.cut and sketch.paste get typed contracts and reply
types in schema/sketch_clipboard.rs and leave unconverted.txt. `at` and
`translate` read as the paste reads them, with its message; the replies
are built from Copied and Pasted, with the same JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch clipboard: import Vec2 from solidcore_record after the layer split
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #10442
* Viewport: no dark patch between nearby bodies (#10442)
The ground shadow was one ellipse under the box around all shown bodies,
darkest in its middle, which for two bodies side by side is the empty
floor between them. Bodies whose footprints meet now share one ellipse
(as before) and bodies apart get one each, on the same ground level and
with the same rings; more than 64 groups fall back to the single ellipse.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5431
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Create Sketch: pick an origin plane through a body in front of it (#5431)
While a dialog waits for a plane, the origin and construction planes are
drawn over the bodies, but picking sorted them by depth, so the face of a
body in front always took the click. When the nearest face hides the
nearest plane under the pointer, the planes now sort just ahead of that
face (in their own depth order, still behind a profile on it). A face at
the same depth as a plane still wins the tie (#31), and nothing changes
when no dialog is waiting for a plane.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* view_confirm_corner: draw the line where the view shows it
Create Sketch now picks the origin XY plane through the extruded box, so the
sketch is flipped to face the view and (50, 0) -> (70, 10) fell outside it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5961
* Sketch: sketch.move_points moves several points, each to its own target (#5961)
A script editing a traced outline could move one sketch point per call,
and only by its id: an agent that had to move two points of a
490-segment polyline redrew the whole sketch instead, breaking every
dimension and feature built on it.
sketch.move_points {moves: [{point | near, to}], tolerance?} drags each
point to its own target in one edit (one undo step), as sketch.move_point
drags one, and the sketch is solved. `near` picks the sketch point
closest to a coordinate, refused when none lies within `tolerance`
(default 0.1 mm) or two are as close. Every point is found before any
moves. The reply gives each point's id, its target, where it ended up and
whether it got there, so a fixed or constrained point is reported rather
than silently left in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new command label to a pending locale file
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fix the new command for the sketch store and geometry split
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Carry the new command label in every complete catalog
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* sketch.move_points reads the sketch through sketch_store
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Open a design from a newer SolidCraft with a warning instead of refusing it
A newer format number or an unknown change no longer blocks opening. What
this version can read opens; a feature it can't read stays on the timeline
with an error, and fields, sections and container parts it doesn't know are
named in the reply and written back by Save, under the file's own number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Saving a newer design from the CLI, and editing a feature this version can't read
`run --save` writes a design holding a feature only a newer build can build;
`--out` still stops, since it would export the part without that feature.
Edit Feature on such a feature says why instead of opening the palette.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate the newer-design notice for the complete catalogs; clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7273
* Viewport: drag a component as a GPU layer of its own
Each step of a Move triad drag placed the component anew, and the
viewport then rebuilt the model scene and uploaded it again. The dragged
bodies are now drawn from the scene built where the drag found them,
moved on the GPU by the drag's motion; the rest of the model stays as it
was. In the viewport a step meshes, builds and uploads no geometry;
only the transform (and the ground shadow) changes.
- gpu: Frame::moving draws a second scene with its own model matrix
(U.model, applied in every vertex entry, instanced parts included);
blocks, evaluated chunks and instanced triangles pass between the
model scene and the layer instead of being uploaded again; glass is
sorted in the layer's frame; the AO prepass and see-through pass
cover it; the frame key includes the layer.
- doc: ModelBody::display_moved_from gives the rigid motion between two
worlds' copies of one solid.
- ui-egui: the model scene without the dragged bodies is built once;
dragged bodies are matched by name; the step's body boxes are the
start boxes moved; selected or hovered dragged bodies light where they
stand. A drag back where it began keeps its layer. A section, an
analysis, continuity seams or no GPU draw the drag as before;
capturing the move makes the scene whole again.
* feat(ui): a setting to keep the highlight under the pointer while Move drags
A Move triad drag drawn as a GPU layer picks nothing under the pointer, which keeps a step from
meshing the dragged bodies where they stand and from looking up the Browser row a highlight
follows. Preferences > Tools > Assembly Move > "Highlight what is under the pointer while dragging
a component" (`move_drag_highlights`, off by default) picks and highlights as before.
Also: the drag layer test takes `as_chunks` (clippy 1.99's `chunks_exact_to_as_chunks`).
* fix(ui): say when the Move drag highlight setting applies
The label names Move's arrows, and the tooltip says that with a section or an analysis shown the drag highlights all the same, and that a part dragged along its joints never does.
* claim: tap marking records once in the model cache
* Model cache: write each tap marking record once and share it between states
Problem: every state of a saved model wrote the cosmetic tap markings of all the features
before it, so the records grew with the square of the features. A design of 400 marked
cylinders wrote 34 of its 37 MB manifest that way: past the 32 MiB limit the save thinned the
cache (590 of 806 states left out, opening evaluates them again) and wrote the manifest
several times while choosing what to keep.
Solution: the records keep a list of markings, each written once (keyed by its text, as the
sheet bodies are); a state names its markings as runs of places, like its bodies and
sketches. A marking at the same place in the state written just before, equal to the bit, is
found without writing it as text. A thinned model keeps the whole list and counts it once;
the reader counts the markings with what a state holds. The cache format is now /6: an older
cache is a miss and the design is evaluated as before. The design document is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Saved model: count each tap marking by its text against the held limit
A state clones every marking it lists, so a run repeating one large marking could hold far more than MAX_HELD items of memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A selected face was filled flat in `sel_face`. An imported mesh (STL, OBJ)
is a single face, so clicking it in the viewport painted the whole part as
one flat blue silhouette and hid every wall, pocket and edge. The fill is
now lit like the hover fill, which already was.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an outline drawn inside a shape past its neck is refused, not looped
An inward offset of a closed outline wider than half a neck of the
shape would pinch it into two; one chain can't be that, and its pieces,
each joined only to its neighbours, ran back over each other in a loop.
When the outline itself doesn't cross itself and its offset would, the
offset is refused like other offsets the shape can't take. An outline
that already crosses itself (a bow tie) keeps its crossing offset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Loop guard: the arc's direction comes with its source, not with the offset piece
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Loop guard: a touch counts, lines along each other count, tolerances from the outline's size
An outline split where it crosses itself only touches itself there and
was taken for simple, so its offset was refused: between pieces that
aren't neighbours a touch now counts as crossing. A neck exactly twice
the distance gives two lines lying along each other, which cross at no
point: such an overlap now counts too. The tolerances come from the
outline's own size plus the coordinates' rounding, not from how far it
lies from the origin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch offset: pass the arc direction from the outline after the dog bone change
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Sketch: a selection held back in part follows the pointer, not past it
Dragging a selection part of which cannot move (a rectangle with a corner
on the origin, all four sides selected) took the dragged side nearly twice
as far as the pointer. `sketch.drag` reported the grab where the average of
all dragged points went; the held corner kept that behind the side, and the
next frame's catch-up overshot. It now reports how the dragged point that
got furthest toward the pointer moved, so what can follow moves 1:1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch drag test: unwrap the world state after the engine change
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7126
* Sheet metal: a corner torn between flanges of two features closes (#7126)
With the rule's corner relief `tear`, a flange made after another,
meeting it at a corner of the base, left the corner open: its setback
stopped the earlier bend at the corner while that panel ran on R + T
past it (an (R + T) x BA rectangle missing in the flat), and the new
panel stopped at the corner, R from the earlier panel's inner face
rather than the rule's gap. Folded, a hole about R + T across showed at
the base corner. A corner between the flanges of one feature is torn
(#809); one between two features was not.
Such a butt corner is now closed and torn: the new panel ends the gap
from the earlier panel's inner face, and both bends run on to where
their panels' ends start, each end on the plane through its start at
the corner (on the bend's outer face) and the outer edge of its panel's
end. In the flat that end is (cos(th - phi) - cos th)/(1 - cos th) of
the way along at the turn phi (sin phi at 90 degrees), one Bezier of
degree 9 (`tear_curved`). Folded, the corner closes but for a sliver.
In a thick sheet the bends' inner faces would cross beside the corner
(at 90 degrees where R^2 < (R + T)(R - g): with the gap 0.8 from about
2 mm). There the new bend's end eases toward (1 - cos phi)/(1 - cos th)
of the way along (`tear_ease`, still one Bezier), as little as keeps the
bends apart; the earlier bend and both panels' ends stay as they are.
A corner that can't be torn so (opposite or over-90-degree bends, a gap
wider than the radius, overlap in the flat) keeps what it had, with a
note.
The test that pinned a two-feature corner as never torn keeps its
open-corner half; the two-feature corner moves to the new tests, which
cover sheets from 0.9 to 3 mm.
Fixes#7126.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: aligned across the line, horizontal or vertical by the pull past an end
Review on #7355: the aligned length must stay the default, and the box
rule shrank its zone to a thin strip on a shallow line. Now `auto` is
the distance between the two points everywhere across from them
(between the perpendiculars through them, and a tenth of their distance
past), and only a clear pull past an end changes it: up or down from
that end gives the horizontal distance, sideways the vertical one. The
two meet on the diagonals through the end, so both zones stay wide on a
shallow or steep line. Midpoint pairs keep main's box rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: two midpoints keep the distance between them past their box's corners
As before #7355 and on main: text above or below the midpoints' bounding box
measures horizontally, beside it vertically, and anywhere else (inside it or
past its corners) the distance between them. The corners fell through to the
line rule and became horizontal or vertical (found in review).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Update egui/eframe to 0.37 (WIP)
egui, eframe and egui-wgpu 0.36 -> 0.37. SolidCraft's egui-wgpu patch is
rebased onto 0.37.0; the vendored accesskit_macos is dropped (0.27.2 has
the #7535 fix).
Not finished: 36 solidcraft-ui-egui lib tests fail, and the full lib run
crashes with SIGSEGV when tests run in parallel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: clear texture deltas that egui 0.37 refuses to drop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop non-finite pointer input before egui; keep test time monotonic
egui 0.37 debug-asserts on NaN wheel deltas, on time moving backwards in the
pointer history, and on add_space inside a Grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hold a click that follows typing in the same frame until the next frame
egui 0.37 drops a field's focus on a click elsewhere when the field first
reads its style, before it reads the frame's typing, so text typed in the
frame of a click was lost.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Name a document tab's close button "Close tab"
egui 0.37 names an unnamed widget after its tooltip, so the tab's × became a
second control named Close beside a dialog's. The space mouse guard test now
clicks where each button was: by name it found nothing behind the guard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Turn on egui's default_fonts: 0.37 no longer does
The built-in Hack is the UI's symbol fallback (#2955). The app got it through
eframe, but solidcraft-ui-egui on its own (its tests) did not.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Text menu: act on the selection the menu click took the focus from
egui 0.37 drops a field's focus on a click elsewhere before the field draws,
and an unfocused field loses its selection, so Copy, Cut and Paste from the
right-click menu saw no selection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Placement field: keep its native height under egui 0.37's interact floor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: pin the theme's 2/3 point radii; measure Japanese ribbon labels with a Japanese face
egui 0.37 rounds widgets 4 points by default, which the theme deliberately
does not follow. The ribbon test measured Japanese with missing glyphs, whose
width changed in 0.37; with BIZ UDPGothic, 駆動 wraps after its particle like
変換 does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: click the render inspector's Perspective checkbox by position
egui 0.37 orders the accessibility tree differently, so the name found the
stage's Perspective segment first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate "Close tab" for the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point the focus workarounds at emilk/egui#8763
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cargo.lock: update only what egui 0.37 needs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web: Id::new -> Id::unique for the wasm-only windows
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: keep its hint centred under egui 0.37's interact floor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* egui 0.37 renames in code main added since the branch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* egui 0.37 renames in code main added since the last rebase
Id::new to Id::unique, ui.id() to ui.scope_id(), WidgetType to Role, the
wheel events' source, and the button stroke read from the widget visuals.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review: disclosures report expanded, late screenshots drained, chat width reset on both sides
A disclosure's node says whether it is open as expanded, as egui's own
collapsing header does. The screenshot channel is drained every frame, so a
shot whose request was cancelled is dropped. Resetting the chat panel's width
forgets both sides' state, as before 0.37, and the request stays with its
window when tabs switch. Tests main added since the last rebase clear their
texture deltas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: register the Catalan catalog
Add `ca` to the locale list, between Bosnian and Czech, and attribute
assets/locales/ca.json.
* Catalan (ca): translate preferences and the 61 new messages
- preferences: every prefs.* message is now Catalan (355 strings).
- the 61 messages added upstream since the last catch-up: the layout page,
sketch options, navigation options and the custom navbar anchors.
- drop the four keys upstream no longer has: thread.direction,
thread.left_hand, thread.right_hand and ui.print_face_one_body.
Work in progress: ui.*, cmd.*, render.*, the loose sentences and help.*
still mix Spanish and Catalan.
* Catalan (ca): translate the first half of ui.*
400 messages: the 3D mouse settings and calibration, the agent chat and the
AI preferences.
* Catalan (ca): translate ui.* up to the equation and edit-in-place messages
200 more messages: the toolbar and browser controls, colour vision, design
properties, the details panels and editing a linked part in place.
* Catalan (ca): translate ui.* up to the navigation bridge
200 more messages: the ribbon headings, the history panel, the graphics
presets, the physical material review and the mesh formats.
* Catalan (ca): finish ui.*, 1,284 messages
The ribbon headings, the properties, the slicer and point cloud panels, the
view angles and the workspace descriptions are now Catalan. ui.* has no
Spanish left.
* Catalan (ca): translate the command names, 508 messages
Every cmd.* entry, including the render library, the sheet metal tools, the
sketch tools and the named views.
* Catalan (ca): translate the CPU render settings and the environment panel
200 more messages: the CPU light rigs, the reflection targets, the resource
profiles, the preflight details and the stage and HDR environments.
* Catalan (ca): translate the render errors, the shot framing and the inspector
200 more messages: every render error, the frame presets and guides, the image
status, the HDR source details and the appearance inspector.
* Catalan (ca): translate the render library, the lights and the looks
200 more messages: the resource catalog, the physical light editor, the colour
looks and the GPU material and glass overrides.
* Catalan (ca): translate the render output, results and ribbon
200 more messages: the output editor and its size limits, the presentation
filters, the completed-image results, the aging and physical references and
the render ribbon.
* Catalan (ca): finish render.*, 2,392 messages
The saved shots, the stage panels, the studio lights, the subsurface and volume
transport, the wear layers and the render browser. render.* has no Spanish left.
* Catalan (ca): translate the standalone labels, 200 messages
The browser and panel labels, the sheet metal bends and reliefs, the boss, rib,
rest and snap fit drag hints and the issue report steps.
* Catalan (ca): translate the export, folder and material labels, 200 more
The export menu, the sheet metal bend table and reliefs, the font and history
options, the joint labels and the issue report help.
* Catalan (ca): translate the remaining panel labels, 200 more
The report and recovery messages, the profile and edge pickers, the rules
editor, the screenshot steps and the sketch selection prompts.
* Catalan (ca): translate the sheet metal, AI preferences and browser strings
200 more: the standing-up offer for Y-up files, the trim and stitch tools, the
AI availability and permission settings and the browser node names.
* Catalan (ca): translate the crash reports and a large part of help.*
200 more: the copies, the crash reporter, the DXF export progress, the file
loading statuses and the help texts for the sketch and solid tools.
* Catalan (ca): translate the home page, the hole presets and the material editor
200 more: the start page and its dates, the install steps, the issue report
notices, the assembly move handles, the material property card and the motion
keys.
* Catalan (ca): translate the navigation bar and the input presets
200 more: the navigation modes, the navbar customiser and its descriptions,
the network share warning, the fastener dimensions and the picking prompts.
* Catalan (ca): finish the catalog, 5,591 messages
The search box, the settings notes, the sheet metal personal rules, the sketch
report and text tools, the timeline menus, the updater and the web file
prompts. The catalog now has no Spanish left.
* Catalan (ca): translate the 634 messages the pending script had missed
The script only flagged strings identical to the Spanish or English catalog, so
every untouched string that differed from es.json stayed in Spanish: the whole
help.* reference, the import report, the joint limits, most preferences and the
fillet and continuity tips. They are now Catalan, and the script counts a
message as done only when a block file contains it.
* Catalan (ca): keep the sketch hints and stop splitting l·l
The sketch tool hints and engine errors are not in en.json, so they live in a
pending file: add the Catalan messages there instead of letting them fall back
to English. The new asset gets its attribution row under attribution/pending,
so this branch no longer edits ATTRIBUTION.md directly.
The painted-text sweep split labels on the bare middle dot, which is Catalan's
l·l inside a word: "Cancel·la" became "Cancel" and the test reported English
where the catalog is translated. Split only on the spaced middle dot.
* i18n: carry the complete catalogs in the pending sketch hints
A pending file that adds English messages also adds them for the catalogs
delivered complete (ar, he, ja, vi, zh), or i18n --check fails. They keep the
English text, as in the Spanish catch-up branch.
* i18n: attribute the pending hints and fix the break message
The pending sketch hints add an asset, so they get the same attribution row as
in the Spanish catch-up branch (same file, so the two merges without a
conflict). The engine has nothing to break, so say so in English.
* Catalan (ca): translate the 30 new messages
The blur preferences, the dimension step settings and the fillet turn modes
arrived upstream after this branch was opened; merge main and translate them.
* i18n: use US spelling in the pending hints and add en-GB
The English catalog is US-spelled, so the English fallbacks say center; en-GB
keeps centre for the four messages that differ.
* Catalan (ca): fold the pending hints and catch up with main
`main` folded `sketch-tool-hints.json` into every catalog when #10895 merged
and deleted the pending file. This branch still carried it, so the merged tree
failed `cargo xtask lists` with 186 duplicate ids and one repeated attribution
row. The 26 hints now live in `ca.json` and the two pending files go; the
catalog row in `attribution/pending/catalan-catalog.md` stays.
The 118 messages `en.json` gained since this branch opened are translated: the
26 hints and 92 new ones (AI HTTP and instructions preferences, surface-map
import, the ribbon-tabs-only view, hidden-edge selection, recovery, the custom
view navigator and a handful of dialog tips). The obsolete
`cmd.inspect_colored_components_disable` is gone, so `ca.json` matches
`en.json` key for key.
The shaded-with-hidden-edges label said `Sombreado`, which is Spanish.
---------
Co-authored-by: CaRLymx <24634598+carlymx@users.noreply.github.com>
* Point clouds: a PLY file's edges and faces as beads and triangles (#5151)
A PLY file's `edge` and `face` elements become segments and triangles
between the cloud's points (a face as a fan), each with its own properties;
a file with them is read whole, since thinning would cut them. A point's
numbers vary along the segments and across the triangles that meet there,
an element's are constant on it.
Segments with `width` and `height` are drawn as beads of that stadium
cross-section, meeting mitred where one runs into the next, from one
indexed template; without them, as lines. Points no segment or triangle
ends on stay dots. A range filter cuts an element where its value crosses
an end, on the GPU and in the tracks alike: each element weighs its
measure (a dot 1, a segment its length, a triangle its area, each kind
over its own total) and spreads it exactly over the values it covers, a
segment's evenly and a triangle's as the tent its corners make.
Columns saved without the element they are on are on the points, so
designs saved with point properties alone still open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: past max_points a PLY is thinned again; the near plane cuts elements exactly
A PLY with edges or faces and more vertices than `max_points` was refused, where it used to be
thinned. It is thinned again: thinning would cut its edges and faces, so they are left out, with
a warning, and raising `max_points` keeps them.
A segment or triangle crossing the near plane moved its corners behind the eye to a made-up
place, which pulled a wedge across the view. A triangle now keeps its true clip-space corners,
which the rasteriser clips exactly. A bead is cut where its axis crosses the plane, a crossing
exact because clip-space coordinates are affine along a line, and its numbers are exact there.
A ramp accepts MAX_BINS bands but an element was split into 4097, so a ramp finer than that lost
measure: half of a segment at 8192. Only the whole numbers have more bands than MAX_BINS.
`xtask mesh-decisions` reads any field named `triangles` as a mesh; a cloud's own complex holds
none, so its three modules are skipped with that reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: a ramp's measure is whole past both its ends; a column on the points says nothing
A ramp of MAX_BINS bands has one band below it and one above it, so an element running past both
ends crosses MAX_BINS + 1 bands past its first. The limit was one short, and such an element lost
what lay above the ramp.
A column on the points now leaves `on` out when saved, so a design holding only points keeps the
form it had, as the field's comment and the pending format note already say.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: a set filter keeps part of a bead whose ends differ; an unreadable point takes only what ends on it
The set filter's whole-element test read the first corner alone, so a bead whose
first end was not kept vanished, while the range tracks counted the part kept. It
now drops a bead only when one value at every corner is not kept; otherwise the
fragments decide, as for triangles.
A PLY with edges or faces and one unreadable vertex was refused whole. It now
keeps the subcomplex the readable points span, renumbered, with its numbers, and
warns about what it left out. A file with numbers on its points gains the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: build the triangle corner weights without a dynamic vector write
The Windows D3D12 shader compiler rejected w[vi] = 1.0 (error X3500).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Dialogs: remember values and options for this app session (off by default)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Dialogs: translate the remember-values help text again
The help text changed to say the setting is off by default, and the
complete catalogs (ar, he, ja, vi, zh) lost their translation of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: recall gives a new face a fresh thread suggestion and rebuilds Move/Hole mode inputs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: format recall
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Status line: say which file an Open or Insert brought in, and whether it got a new tab
"Open done" and "Insert done" were English text built in code, so they stayed English in every
language and didn't say what was opened. They now read "Opened <file> in a new tab", "Opened
<file>" when a blank design was replaced, or "Inserted <file>", from the message catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status line: an opened design is named as its tab names it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status line: an Open's test and Korean strings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status line: an Open's message in the chosen language, and none for a design that found no tab
The message is built outside the window's language scope, so it takes the locale from the preference as the other statuses of the file loader do
An opened design is named as its tab shows it (a default name translated), an inserted one as its component is named
An open that finds no tab left keeps the error and answers it, instead of naming the design shown as opened
The test injects the finished open instead of running and polling a worker
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status line: a design to recover that finds no tab stays offered
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status line: a design to recover that hits the tab limit stays offered too
An Open or recovery with every tab taken was refused before the design
was read, and a design to recover was dropped from the list on that path.
It goes back in the list, as when its read fails. The staged-open test
reads the new status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A bend that cut-outs across it split into several cylinder faces came out slit, silently: only
the picked piece was bent, the rest of the bend was cut away with the cut-out, and the volume came
out short. Picking the other pieces too was refused ("two faces of the sheet that meet along more
than one edge"). A picked bend cylinder now takes every coaxial piece of the same radius between
the same two faces, on both skins; in the flat, a face that meets its bend neighbour along several
collinear runs gets one bend edge, and the notches between them and the bend zone's pieces there
become holes of the sheet.
Test: a_bend_split_by_slots_across_it_converts_as_one_bend (slots cut through a tray's unfolded
bends, one piece picked or every piece): the volume, flat size, outline area, bends and the three
cut-outs are the source's.
Fixes#7530.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11048
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Intersection Curve: take two sketch curves, no helper surfaces (#11048)
Intersection Curve now also takes curves of other sketches. Each curve
stands in for the surface you would get by extruding it along its own
sketch's normal, both ways and as far as needed, so two sketch curves
(or a curve and a face) give their 3D crossing without the two Surface >
Extrude features it used to take. The surface is never added to the
model. Sketches on parallel planes are refused with an error saying why.
The result stays a linked 3D wire that follows edits to either curve.
In the tool, a curve of another sketch fills a side like a face does;
after the first pick the status bar asks for the second, a right-click
starts the picks over, and the hint returns once the curve is made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Intersection Curve: keep other tools' right-click, update the tooltip, add a UI scenario (#11048)
The right-click change now applies to Intersection Curve only: Project to
Surface and Spun Profile behave as on main again.
The toolbar tooltip now says Intersection Curve also takes curves of other
sketches, in every catalog that has it, using each language's wording from
the Project to Surface tooltip.
New UI scenario intersection_curve_from_two_sketch_curves: a line on XY and
a line on YZ give one linked 3D wire along X at y = 0, z = 5; it also checks
the second-pick prompt and that a right-click starts the picks over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GG4jU9aCv381PgLCsseQMP
* Intersection Curve: a picked spline wall meets whole, in one curve (#11048, #9009)
On the SMLib kernel a fit-point spline's wall is one face per span, and
Mesh::surface_patch keeps smooth-joined faces apart, so a face pick met
only the span under the pick and gave part of the crossing (#9009 again,
for faces as well as for sketch curves). A face pick now takes the faces
joined across seams and smooth joins, never across a crease.
The imprint also splits a crossing at every face boundary of either
side, so a crossing came as one wire per span. The pieces are now joined
end to end into one wire, keeping their exact curves; a piece that runs
the other way is reversed as a record curve.
A curve side's sweep is sized from the other body's exact bounds, not
its display mesh. The #9009 test's premise that the spans are one
surface_patch no longer holds and is removed; its checks are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Intersection Curve: a picked face joins only tangent spline faces, from exact geometry (#11048)
Which faces a face pick means is now decided on the exact surfaces, not the
display mesh: the picked face and the spline faces joined to it at least
tangentially (the kernel's seam check), so a spline wall's spans still meet
as one (#9009) while a plane, a round or any analytic face is that face
alone. The pieces of a crossing are joined within ten times the kernel's
intersection tolerance instead of a fixed 1e-4 mm.
Tests: a flat face beside a round and the round itself each give their own
crossing; two sketch curves give one curve at 1/100 and 100 times the size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known-failing tests: the picked spline wall's intersection curve passes now (#11048, #9009)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Book: sketching step by step, with three clips and a numbered screenshot
The sketching page now opens with a first sketch in four steps: start a sketch on the Top
plane, draw a 60 x 40 rectangle and a 12 mm circle with typed values, dimension the circle
until the sketch is fully constrained, and finish. Each step has a short clip, and the last a
screenshot numbering the Sketch tools, a constraint, a dimension, the sketch's state and
Finish Sketch.
doc_shots.py gains what these needed: a setup that runs before recording, so a clip starts
where the last one ended; sketch framing; Enter sent as two input frames; and clips that keep
their pauses (hovering a plane).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: the sketching page's general notes get a heading after Step by step
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: sketching adds Offset and Trim; the sketching figures again on 0.29.0
Two more clips after the sketching walkthrough: Offset draws the rectangle's outline 4 mm inside
it with one click (Chain), and Trim cuts a notch where a circle crosses the top side. All the
sketching figures are made again on SolidCraft 0.29.0, with the clips keeping a moment on each
result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: solid features step by step, with four clips
The solid features page now opens with the sketch from the sketching page made into an open
box in four steps, each with a short clip: extrude it 12 mm, shell it with the top open,
round its outer top edges, then make it 20 mm tall from the timeline while the shell and the
fillet rebuild. The panel table and what follows get a heading of their own.
doc_shots.py: the feature shots share their steps with the setups that lead up to the next
shot, and fail when a feature on the timeline carries a warning or an error, so no figure
shows one. Shell comes before Fillet for that reason: shelling through the rounds needed the
kernel's boolean retry. trim_idle.py takes --hold, the seconds of each idle stretch to keep
(default 0.1 as before); the doc clips keep 0.8 s, so a reader sees each result. The app gets
up to three minutes to answer on a busy machine.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: features add Hole and Circular Pattern; the Parameters dialog, numbered
The features walkthrough gains two steps before the timeline edit: a 4 mm hole on the box's
floor, then Circular Pattern repeating it four times around the tube. The edit at the end now
rebuilds all of it. The parameters page gets a screenshot of the Parameters dialog numbering
apply as you go, user parameters, model parameters by feature, an expression and its value.
The features clips are made again on SolidCraft 0.29.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: components and joints step by step, with three clips
The components and joints page now opens with a two-leaf hinge in three steps, each with a
short clip: the two bodies made into components from the Bodies folder's menu (the first one
grounded), a revolute joint on their barrel ends with Flip turning Leaf B the right way round,
and a drag that swings Leaf B about the hinge while grounded Leaf A stays put. What follows
gets a heading of its own.
doc_shots.py builds the leaves from commands, with Leaf B lifted and set back so the joint
visibly brings it into place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: assemblies add Drive Joints; the assembly clips again on 0.29.0
A fourth step drives the hinge with Drive Joints: the slider swings Leaf B while a ghost shows
where it started, and OK keeps the new angle. The assembly clips are made again on SolidCraft
0.29.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Book: getting started, sheet metal and import/export get pictures
Getting started gains a section on the start page: a numbered screenshot (new design, open,
import, recent, samples, the File menu) and a clip opening a sample from it. Sheet metal opens
with a tray in three steps, each with a clip: a base flange from a sketched rectangle, edge
flanges from two top edges, and the flat pattern with its bends. Import and export opens with
the File menu, numbered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10940
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Emboss: an emboss or deboss that changes nothing says so (#10940)
solid.emboss on a body its tool missed (a sketch on the far side of the
material, a depth that stops short) was recorded as a success with no
warning, so a sheet metal part looked embossed when it was not. The
evaluation now compares the bodies before and after and adds a warning
when none changed. A working emboss or deboss is silent.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Emboss: the changed-nothing warning names what to check, not a cause it can't know (#10940)
CodeRabbit pointed out that an emboss can change nothing for other reasons
than missing the body (for example a profile that lies inside material that
is already there), so the warning no longer claims the profile misses the
body. It says the operation changed nothing and suggests checking where the
profile lies, which side of the face the sketch is on, and the depth.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Emboss test: put the missing sketch below the sheet, since main's sheet metal emboss now cuts from its underside (#10940)
On current main a deboss from the XY plane reaches the sheet (it is changed and gets
the sheet metal flat-pattern warning), so the test no longer showed an emboss that
changes nothing. A sketch 5 mm below the sheet misses it on both bases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #11271
* Polygon By side: Length and Sides boxes, the typed length a side dimension (#11271)
The edge polygon tool showed no value boxes after its first click. It now
shows Length (the side from the first click) and Sides, as the inscribed
and circumscribed modes show Radius and Sides. A typed length places the
second corner and becomes a Length dimension on the first side:
sketch.draw.dimensioned takes a `length` role for sketch.polygon.edge,
an alternative to its radius (as_drawn still adds the radius when no
length is given; both together are refused).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Polygon By side test: read the design's own state so it compiles against main (#11271)
Main's Session::world_state() now returns a Result, so the new test failed
Quick compile on the merge. The sketch is in no component, so the design's
own state shows the same sketch on both the old and new bases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Polygon By side test: take Vec2 from solidcore_record, where main moved it (#11271)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The fillet keeping of #5677 swaps an arc's ends when its sweep jumps by more
than half a turn with both its lines turned. Judged against a reference that
shows the corner mirrored (positions before a move, or a mirrored start), a
fillet the solve left exactly where it was looks turned, and the swap made it
its long complement: a 45-degree fillet on a 135-degree corner became a
315-degree arc with both lines cutting back through it, while the solve
reported ok.
The swap is now decided by the lines: an arc whose tangent lines all leave it
after the solve already rounds its corner and keeps its ends. A swap still
gives a corner its arc back when its lines cut back through it. A second test
keeps a real fillet over three quarters of a turn whose corner mirrored as the
long arc its lines leave (a narrower fix, letting a swap only shorten an arc,
would break it).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A lip kept its rim face as a plain point, so it got no persistent face
name. When a parameter made the box taller, the point stayed below the new
rim and the lip failed ("the plastic feature's placement is no longer on
its body face"). The face is now a face pick, as a boss's is, and the lip
names its body like the other placed plastic features. Both are saved as
the same [x, y, z], so files don't change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon: an option to fold it to its tab row (#10112)
Preferences > Layout > "Show only the ribbon's tabs" (off by default), the
Ribbon Tabs Only command (view.ribbon_tabs_only), and its settings-profile key.
Rebuilt on main's redesigned Layout page.
* Ribbon Tabs Only: switching tabs with a panel menu open no longer keeps the overlay open (#10112)
A tab click now forgets the open panel drop-down of the previous tab, so the pointer leaving or Escape still closes the overlay.
* Ribbon Tabs Only: count its settings-profile key in the profile membership test (#10112)
* MCP: compact inspect_design and tool JSON, off by default (--compact / SOLIDCRAFT_MCP_COMPACT)
Split out of #2901 per review: the smaller inspect_design changed the default
for everyone, so it is now an MCP server option that is off unless asked for.
- solidcraft-cli mcp --compact, or SOLIDCRAFT_MCP_COMPACT=1 (true/yes/on;
0/false/no/off/empty leave it off; anything else is an error at start-up).
solidcraft_mcp::Options::resolve is the one place that decides, so an app
Preferences setting can feed it later.
- With it on, inspect_design summarises sketches (id, name, plane, counts of
points, curves, constraints and profiles, dof, status), returns full contents
only for the sketches named in `sketches` (names/ids, true, false or
"summary"), takes a `bodies` filter and measures only those; unknown names
list the existing ones. Tool JSON is compact rather than pretty-printed.
- Off, tools/list, argument checks, inspect_design and tool JSON are exactly
as before.
- document.inspect gains an opt-in `sketch_counts` (plane, points,
constraints); without it its reply is unchanged.
Tests: both modes in the MCP suite, Options parsing, and the CLI flag and
variable end to end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP compact output: a Preferences setting too (AI › Agents through MCP)
The desktop app's Preferences › AI gets "Compact output" under a new "Agents
through MCP" section, off by default and shown with the chat off too. The app
reports it on the control channel as `mcp.options` ({"compact": bool}); the
agent chat lets its own MCP server read it.
A bridged MCP server (`solidcraft-cli mcp --connect`) asks the app when an
agent first lists or calls a tool and keeps the answer for the session, so the
tools it listed keep their shape. An app not running yet, or busy past 2 s, is
asked again on the next call; an app from before the setting counts as off.
`--compact` and SOLIDCRAFT_MCP_COMPACT=1 still turn it on whatever the app says.
Tests: the server follows the app's answer (waits for it, keeps it, the flag
still wins); the checkbox reaches `mcp.options` and Restore Defaults clears it;
the chat gate allows `mcp.options`. docs/mcp.md and docs/control-protocol.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP compact output: review fixes (mcp.options never blocks, headless test, locales, prefs doc)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP compact output: the setting is a section of the AI page; the bridged test answers mcp.options
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP compact output: the preference test sets it through ui.prefs; rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP compact output: look for a newly started app before asking its options; counts from sketch.inspect for an older app
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4332
* Two-distance and distance-angle chamfers of free-form rims: a test on the SMLib kernel (#4332)
A spline, Bézier or text outline's rim used to be refused by the two-distance and
distance-angle chamfers. The SMLib kernel (#11351) chamfers it along the rim; this test pins
that down on a four-Bézier oval, picked as its tangent chain the way a pick takes it: the
volume taken off is the analytic one for two distances (both ways round) and for a distance
and an angle.
* Sketch: the geometry of a pierce, a point where another sketch's curve crosses this plane (#3599)
* Sketch: the Pierce constraint, a point on a curve of another sketch (#3599)
* Engine: draw a Pierce constraint at the point it holds (#3599)
* Engine: the pierce tests wait for the command that is not written yet
* style: rustfmt, the imports of the pierce geometry in the order rustfmt wants
The rebase onto the current main resolved the rename of Plane, Vec2 and Vec3
from solidcraft_geom to solidcore_record and left the two use lines in the
order the resolution wrote them. rustfmt wants them the other way round, and
the fmt phase of the gate reads the whole tree.
No token of the file changed: the same 2983 tokens before and after, only the
order of the two use lines moved.
---------
Co-authored-by: bherbruck <bherbruck@gmail.com>
Co-authored-by: vdirienzo <vdirienzo@users.noreply.github.com>
* claim: #10745
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Control channel: ui.menu refuses missing targets, reports the History item menu, and tells the joint menu items apart (#10745)
- ui.menu looks a target up and refuses one the design doesn't have ("no body `NoSuchBody`").
- The History bar's feature menu is the shared context menu (Target::Timeline), so ui.menu
reports it, ui.menuPick runs its items and {"type":"timeline","feature":id} opens it.
Its Show All toggle moves to TreeState so the menu can list Delete after the marker.
- Edit Joint Limits is ui.editJointLimits and opens Edit Joint with Limits expanded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Icon audit: open the section and canvas menus on a real section and canvas; a hidden section has a menu too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui.menu: check a group's or folder's scope and folder name; Delete after the marker gets its own id
A group or folder target is refused unless its scope is a row of its component (`c<id>` or a
placement of it) and the folder is bodies, sketches or construction. The History item menu's
delete of everything after the marker is ui.deleteAfterMarker, so ui.menuPick can tell it from
Delete (review on #10746).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui.menu: a component's own c<id> scope is the design root's only; test that Delete after the marker deletes
The browser draws a part's folders and groups under its placements (o:<path>), so a c<id> scope
for any component but the root names a row that isn't there (review on #10746). The History test
now picks ui.deleteAfterMarker and checks the features are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui.menu: a placement scope must be spelt as the browser keys it
o:012 parses to placement 12 but isn't the row's key (o:12), so Show/Hide would store a key no
row reads (review on #10746).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History item menu: no Delete after the marker when nothing shown is after it
A timeline target for a feature the bar's component filter leaves out listed no features, so the
item did nothing (review on #10746).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui.menu: a plane target must be construction geometry
The plane menu's Show/Hide keys the feature's name as an origin item, so any other feature got a
menu whose actions don't fit it (review on #10746).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui.menu: accept the view navigator's and selection filter's menus, which main added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* AGENTS.md and the contributing skill: say how to work as an agent
Two rules that the loop's own agents follow but the repository never
wrote down, so every agent that reads it had to rediscover them:
* The code, the comments, the commit messages and the docs are in English,
always. A comment in another language is a defect: the people who
maintain the code cannot review it. A user-visible string is not inline
in the code either; it goes to the message catalogs, and the UI text
skill says how to name and translate it.
* Parallel work runs in parallel, and dependent work stays sequential.
One subagent per independent part, with a self-contained brief, and no
two subagents writing the same file. A fix and the test that proves it,
a refactor and the callers it breaks: those stay in order.
AGENTS.md is the router, so it gets the two rules in one line each, and
skills/solidcraft-contributing/SKILL.md gets the "Working as an agent"
section with the detail.
* AGENTS.md: fit the two agent rules under the router cap
`cargo xtask skills` reads the router as a router: one line per rule,
with the detail in the skill the line points at. The two new lines
broke that contract twice over. They carried their own detail (a
comment in another language is a defect; one subagent per part, no two
writing the same file) instead of pointing at the "Working as an
agent" section that already holds it, and the file grew to 5361
characters, over the 5000 a router may have.
So the two lines shrink to what a router line is, and five clauses
that repeated a rule the pointed-at skill already states in full give
up their place:
* "Act when the code, docs and rules settle a question" is in the
contributing skill, in more detail.
* The unsafe allowlist is the crash-safety skill's own list.
* "No second PR for an issue a lower-numbered one closes" and "never
force-push main, no pushes just to catch up with main" are the
contributing skill's claim and push rules.
* "Do not switch branches while the gate runs" is in the contributing
skill too.
No rule is lost: each one still has exactly one place that states it,
and that place is a skill. The router is 4970 characters.
Open GitHub issue form filled the issue through the link only up to
2,000 characters, with every space and line break encoded as three, so
most reports opened GitHub with the title alone and their text on the
clipboard, and many arrived empty (#10556, #10654).
The link now encodes only what a query value can't carry (a space is
`+`) and is limited by what GitHub keeps: 6,000 characters, and 7,000
once its sign-in page encodes it again. A report too long for that still
goes through the clipboard, whole.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7641
* Sketch on a thickened surface follows the face (#7641)
Thicken dropped the kernel's face history, so Create Sketch refused
every face of the solid. Carry that history through, the same way
Shell and Trim do.
The regression covers the offset face and an end wall, and checks
that a boss on the offset face follows a thickness change and reopens.
* claim: #9623
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Sheet metal and plastic rules: Thickness in a rule's expressions is the rule's thickness
A rule's expressions read `Thickness` as the rule's thickness only while the
design had no parameter of that name; with one, the default gap, reliefs and
a `Thickness` bend radius took the parameter instead (a 2 mm rule beside
Thickness = 10 mm closed corners to a 10 mm gap). Now `Thickness` is always
the rule's, as documented; the rule's own thickness still reads the design's
parameters, so `thickness: Thickness` keeps naming the design parameter.
Renaming a parameter called Thickness, its users and what it drives follow
the same reading: only a rule's thickness field refers to it. Renaming a
parameter to Thickness is refused while another rule field uses it, since
that field would then read the rule's thickness instead.
Fixes#9623
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Claim #9736
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: a move not captured yet is an unsaved change (#9736)
A component moved without capturing its position left the design reading
as saved: file.save wrote the file without the move and said nothing, and
closing the tab didn't ask. Now:
- Session::is_dirty is true while a move is pending, so closing a tab or
quitting asks "save changes?".
- file.save and file.save_as refuse while a move is pending, naming the
component and the capture and revert commands.
- In the app, Save As (and Save As JSON, Save a copy, Download design)
asks the Capture Position question first, as Save already did; a tab
closing after "Save" waits for that answer, and Cancel keeps it open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Close: the save-changes card waits behind the Capture Position question (#9736)
Saving a tab that closes asks the Capture Position question first; the
"save changes?" card stayed drawn over it and took a second answer. It
now hides and ignores answers until the question is answered. The design
container doc says a save stops for a move not captured.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: an exploded view shown is not a move to save (#9736)
explode.show displays a view through the pending moves, as an uncaptured
move does. Those placements last only while the view is shown, so they
don't make the design unsaved and don't stop a save
(Session::moved_uncaptured). A move on top of a shown view still does.
The relink test saved with a move pending; it captures it first now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: the pending-move save test reads the world state as main now gives it
world_state() returns a Result since the kernel merge; the test unwraps it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Docs: add BoxInsertDesigner to the showcase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: attribution rows for the BoxInsertDesigner showcase recording
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The joint origin input only accepted faces, edges and vertices, so the world origin and sketch points could not be picked to place a joint. Extend the origin input's snap mask with ORIGIN and POINTS and resolve a sketch point (and the empty-body world-origin vertex) to a world snap in snap_of, so a joint can be placed on the design origin or a hole centre like Fusion.
* Sketch Project: a face or edge of a part's second placement projects where that placement is (#9957)
Projecting the face of `Block (Part:2)` failed with "face of Block: the
face no longer exists". The pick's body name was turned into the
definition's own name, and the model a sketch reads holds only each
component's first placement, so the face was looked for on the first
placement, somewhere else.
Sketch picks now keep the name the browser shows, and the further
placements a sketch's links name are placed into the model it reads
(`with_placed_copies`), when the sketch is evaluated and when a link is
added or refreshed. Only the named ones are placed. A link to a body
the model lacks also makes the sketch follow every placement, so moving
the copy moves what was projected from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Project: a projection from a second placement follows renames of its part and body (#9957)
The link keeps the copy by the name the browser shows (`Block (Part:2)`),
which a rename of the component or of the body changes. component.rename
and body.rename now rename it in the sketches' links as well.
The copies a sketch reads are found through their component's bodies,
not by going through every body for every placement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Scale dialog gets a Type row, Uniform or Per axis. Per axis shows
X, Y and Z rows and sends factors, which solid.scale already takes. A
Scale made with factors opens per axis with its three values; before,
they rode along as an extra and the dialog's factor did nothing.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4644
* Add the Fair Surface and Match Surface dialogs (#4644)
Neither command had a dialog, so the toolbar and command search ran them
with no parameters and they failed with "`body` is required".
Fair Surface picks the surface or some of its faces and sets the
strength, the iterations, whether the edges are kept and an optional
tolerance (blank: 0.001 of the body's size). Match Surface picks the
surface or face to rebuild, the target and an edge chain of the target,
and the continuity (G1, G2 or G3, default G2). Both preview, and Edit
Feature restores the saved picks and settings. New labels go through
the catalogs with English, Japanese, Chinese, German and Korean text.
* Keep surface-dialog strings pending with complete translations (#4644)
* Fair tolerance is a length; Fair and Match picks reopen on their saved bodies
The Fair dialog's tolerance now goes through the same design-unit length
conversion as the other surface lengths, on OK and when an edit is refilled.
Editing a Fair or Match feature looks its face and edge picks up on the body
they were saved on, so a coincident face or edge of another body cannot take
their place.
* Surface dialogs: strings stay in the pending catalog only (#4644)
* Surface dialogs: edge picks use the session world, as main's edge_sel now does (#4644)
* Surface dialogs: refuse to refill when a saved pick no longer resolves, and pass body names by reference (#4644)
* Surface dialogs: Fair and Match now open dialogs, so the refused-command tab test no longer lists them (#4644)
* Stderr: a closed stderr no longer stops the app, the CLI or the MCP server (#10111)
`eprintln!` panics with "failed printing to stderr" when stderr is a
pipe its reader has closed. A process another program starts writes
into such a pipe: `solidcraft mcp` under an agent, and the app that
one starts, which inherits it. #10111 is the app stopping that way
while an agent (Codex) connected. `solidcraft_geom::note!` (re-exported
as `solidcraft_engine::note!`) writes the same line and ignores a
failed write, as the CLI's logger already does; the app, the CLI, the
MCP server, the crash hook and the crates they run use it instead of
`eprintln!` outside tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stderr: test that a closed stderr leaves the CLI's exit code as it is (#10111)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stderr: the old name's alias and the fuzz command don't stop on a closed stderr either (#10111)
`solvecraft-cli` writes its deprecation notice before it starts
`solidcraft-cli`, so an agent still configured with the old name got the
panic before the MCP server started (found in review). It and the fuzz
command now write through `note!` too, and the test covers the alias.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: the component menu keeps its everyday actions and groups the rest in flyouts
A component's or placement's right-click menu had grown to about thirty entries in seven
blocks. Activate, Edit in Place, Open Linked Design, Move/Copy, Show/Hide, Isolate, the
clipboard, Delete, Rename, Appearance, Physical Material and Properties stay on the menu;
Ground, Capture and Revert Position, Unlock Contents and Turn Up Axis move to a Position
flyout, Relink Source or Extract to File and the exports to File, New Component, New Group
and Paste New to New, and Show All Bodies, Cycle Component Color, Expand All and Collapse
All to Display. context_menu::entries lists a menu with its flyouts, as ui.menuPick reads it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: the component menu nests its flyouts by topic, and flyouts no longer scroll
Position (Ground, Capture and Revert Position, Unlock Contents, Turn Up Axis), Component
(New Component, Rename, Appearance, Physical Material, Cycle Component Color, Relink Source
or Extract to File, Properties; Design on the design's row), Export (Export, Save As Mesh,
Send to Slicer) and Browser (New Group, Expand All, Collapse All) each open a flyout; Paste
New stays with the clipboard and Show All Bodies with Show/Hide. Flyouts open inside flyouts,
so Appearance keeps its quick choices inside Component; the keys walk in and out of them.
A flyout no longer scrolls or sits away from its row: every flyout has its own area, measured
whole, where a short one used to squeeze every later one into its height. A component's only
body is no longer offered as a component of its own on a folded Bodies folder's entries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: the component menu starts with what a double-click does, and keeps the old order of its sections
A linked component's menu starts with Edit in Place and Open Linked Design when a double-click
edits it in place (double_click_components), and with Activate otherwise. Position, Component
and Export follow Move/Copy, then the clipboard, then Show/Hide and Isolate, with Browser last,
as the sections came before the flyouts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Show All Bodies is on a component's menu only while a body is hidden
It is listed while a body is hidden itself, in a hidden placement, or in a hidden Bodies folder or
group of bodies, anywhere in the design, since that is what it shows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Relink Source and Extract to File sit right below Rename in the Component flyout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Placement and Organize flyouts, Turn Up Axis back as a flyout, and flyout fixes
Placement (Ground, Turn Up Axis, Capture and Revert Position, Unlock Contents) follows
Move/Copy above the first separator, Turn Up Axis opens its two turns in a flyout again, and
the Browser flyout is called Organize. The Component flyout has three blocks: New Component
with Relink Source or Extract to File, then Appearance, Physical Material and Cycle Component
Color, then Rename and Properties.
A flyout of a flyout that opened to the left opens to the left too instead of covering the
menu, Left back to the menu chooses the row that opened the flyout, ui.menuPick refuses a row
that only opens a flyout, and the icon audit checks every level. The guides and the control
protocol describe the new menu paths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: ui.menu gives a flyout's rows their placeholder flag too
ui.menu set placeholder only on the top-level rows, so a client reading
a flyout row's placeholder got nothing. The icon audit now reads the flag
of the flyout rows instead of resolving their icons itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11505
* Selection filter: started from command search, it offers Faces, Bodies, Components (#11505)
Command search ran select.filter with no parameters, which could only fail
with "missing field `mode`". Started from the UI (command search, a
shortcut, ui.start), it now opens its three modes as a menu with the
current one marked, as View > Visual style and Navigation tool do (#8868).
Programmatic calls keep their contract and open nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8201
* Sketch Mirror: use an origin axis that is not in the sketch plane (#8201)
A sketch on a part face does not hold the world X, Y or Z axis, so Mirror refused the pick. It now mirrors about the axis's projection into the sketch plane and keeps that line linked as fixed reference geometry. An axis perpendicular to the plane stays refused because it has no line in the plane. The sketch's own X and Y axes keep working as before.
* claim: #3523
* Linux 3D mouse: decode spacenavd's axes in its documented frame (#3523)
spacenavd reports x to the right, y up and z away from the user, with the
rotations about those axes. The decoder treated y as away and z as up, so
with a stock spacenavd push and lift traded places, as did sideways tilt
and twist. Map the daemon's axes to the raw HID frame as translation
[x, -z, -y] and rotation [rx, -rz, -ry].
The decode still runs before a device's calibration and the per-axis
motion choice, so both apply unchanged on top of the corrected reading.
The tests now move each daemon axis on its own, in both directions, so a
swap of two axes can no longer pass.
Adds DeepSeek and Qwen presets to both endpoint protocols: OpenAI-compatible (api.deepseek.com, dashscope-intl compatible-mode/v1) and Anthropic-compatible (api.deepseek.com/anthropic, dashscope-intl apps/anthropic).
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #2217
* Dialogs: drag a value's label sideways to change it (#2217)
A value row's label (expr_row, hint_row) now scrubs a literal value: about a
hundredth of its size per point of drag, on that step's grid, Shift ten times
finer, Ctrl/Cmd ten times coarser. The unit and decimal mark stay as typed, a
size never turns negative, and expressions and parameters are left alone. The
text changes as if typed, so previews follow and OK still makes one command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Label drag: measure from the press point, cap values, keep scrub kit-private
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix: Revolve axis origin takes expressions instead of silently zero
- AxisRef::Line origin is a PointExpr evaluated with parameter values in the design unit (format note in pending)
- An unreadable origin or dir is a BadParams error instead of (0, 0, 0)
- Edit Feature keeps the saved expressions of an untouched origin or dir, for solid and surface revolves, in moved components too
- Face role names stay stable with a parameter-driven axis
* chore: Re-run PR checks after the description fix
* fix: Edit Feature of a revolve maps nothing where nothing is placed
- unplaced designs skip world_state and the pick table, as before the merge
- the untouched-edit test checks that OK applied the edit (CodeRabbit)
---------
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #8220
* Agent chat: Custom instructions in Preferences, added to the system note (#8220)
Preferences > AI gets a multi-line Custom instructions field, saved with
the other AI preferences (agent_instructions, kept by page resets like
other user-written text). The chat adds the text after its own system
note when a session starts, by the routes #9811 set up: ACP session/new
(the Claude adapter's _meta key, the standard systemPrompt field, the
Antigravity key) and the system message or field of every API protocol.
Connect and New chat set it, so an edit applies from the next chat and
never changes the one running. Blank text adds nothing; at most 4000
characters are kept, in the field, over ui.agent_chat and from a hand-
edited settings file. ui.agent_chat takes and reports `instructions`.
* Custom instructions: typing in the field stays in the field
The text area did not report itself to Preferences search as a key sink, so with
the field focused, search took the typed characters and moved focus away. The
field now notes the sink while it has focus, like the other preference fields,
and the #8220 test types into it.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
The tool face of Split Body is now a face pick: it is named when it is
picked and found again by that name, as other face picks are, so a split
by a rail's face follows the rail when a parameter moves it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #12066
* Hole: a hole on a face that another part touches drills its own part (#12066)
A hole placed by position with no direction drills against the outward
normal of the face at the point. That face was looked for on every body,
so where another part touched the face at the hole, the part made first
won. The hole then drilled away from the part `targets` named and cut only
the tool's run-in pocket into it, without an error.
A hole that names its bodies now goes by their faces wherever one of them
passes through its position, when it is made (hole_direction_at) and when
a design is evaluated (hole_dir_into_face). Saved holes whose direction
leaves their own body's face there are mirrored into it, as format 18 does
for a thin plate's far side; the pending format note records it. A hole
whose bodies have no face at its position (placed on another part's face
to drill the part behind it) goes by every body's faces, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PVKpSUSGYjbrBhfZGjqZEE
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The value text is drawn level, in an upright box, and the line runs
through its middle. The layout stopped the line where the box's farthest
corner reaches along it (half.x*|u.x| + half.y*|u.y|), not where the line
leaves the box (min(half.x/|u.x|, half.y/|u.y|)). They agree only when the
line is level or upright: at 45 degrees a radius leader stopped about
12 px short of its text, and an aligned dimension's line broke too wide
around its value.
One helper, box_exit, gives where the line leaves the box, for the radial
leader, the linear break and the leader to a text pulled past the
extension lines. Whether the text fits between the arrows still goes by
the whole box. A text box that isn't finite counts as empty, and one
larger than a sketch can be is held to MAX_COORD.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10428
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Primitives: a pick field waits for its pick and says what it is for
Clicking Face, Reference 1 or 2 in the Cylinder window, or Point in the
Box, Sphere and Torus windows, and then clicking something the field
does not take (empty space, the cylinder's own preview) gave the
keyboard to Diameter, so the field no longer looked active and nothing
said why the click picked nothing. A pick field clicked into now keeps
the keyboard until a click picks something, and a click it does not
take leaves a note under the form saying what the field is for.
These fields also get their own tooltips: Face is the face or vertex
the cylinder stands on, Reference 1 and 2 are straight edges of that
face the distances below are measured from, and Point is a vertex,
edge, face, sketch point or the origin whose point fills X, Y and Z.
Fixes#10428
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #6818
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Hole: the handle drawn with the shared marker (#6818)
A Single hole's drag handle (Move holes by clicking or dragging) is drawn with the placement
marker from place_gizmo/look.rs instead of its own ring and cross, so a hole and a Rest on the
same model show one language for the same action. place_gizmo::marker is the one crate-visible
door: it runs the marker's hover and drag motions under the handle's id and draws the crosshair,
never dimmed. Hole keeps its snapping, the click that takes a hole out, its handle names and its
hover text.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Hole: hole_handle removed (#6818)
The shared marker draws the handle now; nothing else used it.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Hole: the marker takes no colours it does not use (#6818)
place_gizmo::marker took a &Tokens only to hand it to crosshair, which reads its colours itself,
so the hole's show fetched tokens nothing read. The argument and that fetch go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: a test sees the handle drawn as the shared marker (#6818)
The hole tests found the handle by its published position, which the look does not change. This
one reads what the frame paints round it: the white dot and four dashed arms at rest, no ring
round the centre, arrowheads when pointed at, solid shafts while it drags. It fails with the old
ring and cross back on the call line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Place handles: marker hover eases in 120 ms, drag in 220 ms (Refs #6818)
The marker answered the pointer in 220 ms and a drag in 360 ms, which felt slow on review. Both
stay in look.rs as the one place a later preference can read them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Evaluation: a construction axis moved past a feature makes it evaluate again (#9544)
The state digest in a feature's cache key left out the construction
geometry before it, and the context digest hashes construction features
without their order. A feature started from the same key with or without
the axis before it, so after a move it kept its old result, and a cached
state restored whole brought back the construction list it was made with.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Evaluation: say plainly what an empty construction list hashes (#9544)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9236
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* GPU path tracer: don't rerun a setup that crashed in the driver (#9236)
A driver that takes the process down while it compiles the path tracer
(RADV on an RX 7600) is beyond error scopes and unwind guards. A running
setup now keeps gpu-path-setup.json (its adapter key) in the settings
folder, removed when the setup answers or the app closes normally. A
launch that finds it for the same adapter leaves the setup failed with an
explanation and a Try again button; CPU ray tracing stays available, and
a driver update changes the key and so tries again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Appearance: a picture of your own behind the model
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Background picture: a label that fits its row
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11949
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contact sets: input and output schemas for the seven contact commands (#11949)
describe_command now gives the exact parameters and reply of
contact.enable_sets, enable_all, disable_all, create, edit, list and
check, and the warn and strict parameter checks use them. The handlers
read their parameters from the raw JSON, so the contracts in
schema/motion.rs read each key as its handler does, with its message:
`occurrences` (OccurrenceKeys) and `set` are required in the schemas
but left to the handlers' messages in the types, through a small
`require` transform. The replies are built from typed values instead of
json! literals, with the same JSON; the listed sets mirror the doc
crate's ContactSet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
A 2D TRIMMED_CURVE in a pcurve read its basis straight through read_curve,
past the depth check that only the cached entry points (curve_in, curve_2d,
surface_in) made. A trimmed curve whose basis is itself, or a loop of two,
recursed until the stack overflowed and the app closed.
The depth check now sits in read_curve and read_surface, which every curve
and surface read passes through, so any chain of references, a cycle
included, ends at MAX_GEOM_DEPTH with an error that names the entity:
"curve #9: definitions nested more than 12 deep, or referring to
themselves". The other nested entities (surface, seam, intersection and
bounded surface curves, pcurves, 3D offset curves, offset, trimmed,
revolution and extrusion surfaces) already went through the checked entry
points; they now share the one check.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch: keep profile outlines and trim/extend cuts between mouse moves
* Sketch: keep profile outlines and trim/extend cuts between mouse moves
Hovering a large sketch sampled every profile's loops into polylines for
each point asked, and Trim/Extend intersected the hovered curve with every
other curve on every mouse move.
- Loop2::contains rejects points clearly outside a box from the loop's end
and control points before sampling; Region2::outline samples the loops
once (RegionOutline). Profile keeps both in OnceLocks and answers
Profile::contains from them (viewport pick, profile_at_point, profile
selection by points). Answers are unchanged: the box margin covers
rounding, and non-finite values or negative conic weights skip the box.
- sketch_modify splits the cuts on a curve (TrimHover) from choosing the
piece around the cursor. The UI keeps one per sketch state and curve,
and Extend's preview per sketch state, curve and growing end (afresh
when the sketch has an infinite line).
Plate with 400 circles (801 profiles), release, per mouse move: UI frame
5.19 -> 1.11 ms, with Trim 9.45 -> 1.50 ms; 30 lines x 30 splines: Trim
piece 6.10 -> 0.0002 ms. Equivalence tests compare with the old answers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: keep the profile outline helpers in the sketch crate
The outer loop's box, the clearly-outside test and the outline sampled
once move from geom into crates/sketch/src/profiles.rs as private items
built from geom's public types, so the PR leaves crates/geom untouched.
Profile::contains answers exactly as before; the geom test moves to the
sketch profile tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Box window: a picked point fills Corner and Center in the design's unit
A vertex, edge or face picked into the Box window's Point input wrote its X, Y and Z as millimetre text whatever the design's length unit was, so an inch design showed "50.8 mm" where the other fields read inches. The fields now take the point through length_input::model, as Move and the Hole references do, so they read "2 in" there and stay "50.8 mm" in a millimetre design. The same applies to the Sphere and Torus centre.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box window: a picked point reads to a millionth of the design's unit
length_input::model divides without rounding, so a vertex at 38.1 mm read "1.5000000000000002 in" in an inch design. length_input::shown rounds to a millionth of the design's unit, as the millimetre text did before, and the test pins that case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box window: a picked point keeps the micrometre in every design unit
length_input::shown rounds to a millionth of the design's unit, and the picked point's text is what OK sends, so in a metre design a vertex could move by up to half a millimetre. Document::design_length keeps the micrometre in every unit and still writes 38.1 mm as "1.5 in". The test now covers a metre design with a point that is not round in mm, and the Sphere and Torus centre.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic: view-mode name, face term and Fillet command name in the hidden-edge selection preference
* Arabic: translate the sketch tool hints and errors, clearer Fillet phrase in the hidden-edge selection help
* Sketch Trim: a cut on a shape's centre ends the piece there, with no second point
Trimming half of a center rectangle's diagonal left two points at the centre. Trim dropped the diagonal's Midpoint constraint and ended the kept half on a new point held only on the other diagonal, so the old centre was free and the new end slid along the other diagonal. Dragging a corner pulled them apart.
A cut that lands on a point held at the middle of the trimmed line or of the cutter now ends the kept piece on that point. When the trimmed line held it, the Midpoint moves to the cutter if the point is the cutter's middle too (a rectangle's diagonals bisect each other), and otherwise the point is held on the cutter as a new end would be.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Trim: weld the cut end before a parallel distance moves onto it
A distance between parallel lines that measured from the trimmed line's end moves to the kept piece's start. When that start is a cut welded to a centre point, the move named the new point, which the trim then removed along with the dimension. The weld now happens first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Trim: test that a parallel distance moves onto the welded centre
Trimming the start half of a center rectangle's diagonal moves a distance to a parallel line onto the kept half's start, which is the centre. The test fails if the weld runs after that move: the dimension then names the cut point and is removed with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Trim: the centre comment names the case that reaches it
Only a line carries a Midpoint, so the comment's ellipse case could not reach this code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Trim: a crossing line whose middle is only near the cut gets no midpoint hold
Trimming a line at its held midpoint moved that hold onto the cutter whenever the cutter's middle sat at the cut, so a crossing line that merely happened to have its middle there was tied to the point. The hold now moves only when the sketch makes the two lines diagonals of a parallelogram (each pair of opposite sides held parallel, horizontal or vertical), as a center rectangle's are; otherwise the point stays on the cutter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Trim: ask the solver whether a cutter's middle is held at a cut midpoint
Moving a cut midpoint's hold onto the cutter only for a parallelogram of parallel, horizontal or vertical sides missed rectangles the sketch holds another way: with the bottom side held square to a side instead of horizontal, trimming a diagonal at the centre left the centre held only on the other diagonal, one degree of freedom freer than before. The hold now moves when the sketch already implies it, that is when adding it to the sketch as it was takes away no degree of freedom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Trim: solve for the implied midpoint only when a cut lands on one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
a_long_expression_opens_wide_while_edited_and_enter_applies_it moved the cursor to the end of the wrapped field with Ctrl+End. The control channel's cmd flag also sets ctrl, and on macOS egui treats Ctrl with End as an unhandled Emacs-style chord, so the cursor stayed where the click put it. The typed " * 2" did not land at the end, the parameter kept its old expression, and the test failed on macOS while it passed on Linux.
The test now uses Command+Down with ctrl off, which egui maps to the end of the text on every platform. What the test checks is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11584
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the sketch follows a dimension's value while it is typed (#11584)
While a new dimension's value was typed, only the dimension moved: the sketch's curves, points, constraint glyphs and other dimensions stayed at the old size until Enter. The typed value was already solved in a scratch session; it is now solved in the frame it is typed, and the open sketch is drawn from that solve, for every kind of curve, within the display cache's limits per sketch. Esc draws the design again. Picking and snapping of curves and points stay on the design, and no hover highlight of the design is painted while a value is typed. A value that does not solve keeps the last one that did.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: the sketch scene follows each solve of a typed value, not its address (#11584)
The sketch scene was keyed on the preview's address, which a later solve can have once the drawn one is freed; the scene would then stay at the old value. Each solve now has a number, and the scene is keyed on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: while a value is typed, no design profile is lit over the sketch, and its curves are sampled before its fills (#11584)
The profile under the pointer was lit where the design has it, over the sketch drawn at the typed value; it is no longer, and the highlight is built again when the value is let go. The typed sketch's profiles were sampled before its curves from the one budget, so a sketch whose fills used it up lost its curves; the curves now go first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: a selected profile is not lit over the sketch while a value is typed either (#11584)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: the view goes to the typed preview only once a value is typed (#11584)
A picked dimension's value box opened with a draft that is the design as it is, and the view already treated it as the typed preview: the profile under the pointer, the selection and the hover went dark before anything was typed. The preview now starts with the first key, completion or reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: a reference picked into the value is solved at once (#11584)
The overlays read the preview before the editor solves a changed value, so for the click's frame they drew the solve before the reference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: a selected sketch curve is not lit where the design has it while a value is typed (#11584)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: the pointer's x, y readout is not drawn while a value is typed, as the hover is not (#11584)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: curvature combs, the design's teeth, are not drawn while a value is typed (#11584)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: while a value is typed only the open sketch loses its hover and profile highlights; other sketches keep theirs (#11584)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11718
* Sketch Transform: turn and scale about a picked point, such as a rectangle's corner (#11718)
The Transform window turned and scaled the picked entities only about the
middle of their box. It now has a Center field, as Move does. A sketch point
picked there is the point Scale and Angle work about, and Position moves it.
The box, its corner handles and the knob in the view follow the same pivot.
With Center empty, Transform works as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Transform: a click on a corner picks it as Center while Center waits for a pick (#11718)
The rectangle corner the issue wants to turn about sits under the box's
corner handle, so a click there started a scale. While the Center field
waits for a pick, the box's handles leave clicks to the sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Transform: the handles work again once Center has its point (#11718)
Center is the window's last field, so a pick there left it active, and the
box's handles stayed off until another field was clicked. They are now off
only while Center is empty and waiting for its pick.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon: a tool pinned into the Finish Sketch group shows pressed
The Finish Sketch and Finish Editing groups never drew the pressed state for any of their buttons, so a drawing tool dragged into them (the group at the ribbon's right edge takes drops) looked like a one-shot action while it ran. Only Finish, Cancel and Finish Edit are now left out of the pressed state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon: test that Finish, Cancel and Finish Edit stay plain under a press
None of the three runs as a tool or leaves a dialog behind, so a press is the one way they could light up. The tests now press each one and fail if any of them is dropped from the exclusion. Finish Edit is pressed and released in the edit-in-place test, so the release is also the click that finishes the edit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon: Finish with AutoConstrain stays plain under a press like Finish
Finish with AutoConstrain belongs to the Finish Sketch group and ends the sketch like Finish, but it was not in the list of buttons left out of the pressed state, so once pinned as a button it lit while the pointer was held on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8768
* feat: Browser folders start closed and find a body only when asked, behind a preference
Preferences › Layout › Browser rows start closed (`browser_rows_start_closed`, off by
default) starts the Browser's folders closed, and placements too whatever "Components start
open" (#9274) says. Rows then open with their arrow, Expand All or Find in Browser, which opens
just the rows down to its body and closes again the ones the last find opened. A body picked in
the 3D view leaves the Browser as it is, and only the body Find in Browser found has the rows
above it marked, so a large assembly's placements are not named again after each edit.
With the preference off, folders start open, placements start as "Components start open"
says, and a pick in the 3D view opens the Browser down to its body, as on main. Find in Browser
looks the body's placement up once and opens its rows before drawing, instead of each row
testing the revealed path while it is drawn.
* Browser tests: read the row order from the Browser's content frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9719
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamics: rigid-body solver core with joints, gravity and springs (#9719)
A new L1 crate, solidcraft-dynamics (geom only): rigid bodies in maximal coordinates, joint constraint equations with analytic Jacobians for rigid, revolute, slider, cylindrical, planar and ball joints, gravity, linear spring-dampers and constant loads; the index-1 equations of motion solved through a rank-revealing Schur complement (repeated joint equations are solved, not refused); RK4 and Dormand-Prince 5(4) with position and velocity projection; joint values, rates, reactions and energies at every output sample; caps on bodies, joints, rows, steps and samples; Result errors only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dynamics: take Vec3 from the record crate after the layer split, refresh the lock file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
- section() kept the loose fit whenever it had fewer curves, even when it had merged 2 mm walls and an R2 round into one R2.85 arc that misses the walls, leaving the outline open
- The tight fit is now also kept when the loose one strays from the exact crossings (on planes and rulings) and the tight one does not; capped work, other curves count as near
- Test: a box with R2 corner rounds and four tapered grooves stopping 2 mm short, cut at Y=20
Co-authored-by: P'tite Tête <asso@ptitetete.com>
The probe ran `nvram` through PATH, which a Finder launch may not list
and which a look-alike earlier in it could change. The doc comment that
said exec would need unsafe is replaced by a description of what the
code does. Behaviour is otherwise unchanged.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #10220
* Web app: keep unsaved work in the browser instead of the leave-page box (#10220)
A new preference, off by default, on Preferences > General > Saving (web
app only): "Keep unsaved work in this browser instead of asking when the
tab closes". With it on, each open design with unsaved changes keeps a
copy in the browser's private storage (keep-<page>-<design>.sc/.json),
written once the design has been still for 0.8 s (at most 4 s after the
first change it lacks) and again on pagehide or when the page is hidden.
While every copy is current, beforeunload doesn't ask. A copy goes when
its design is saved, closed, or the preference is turned off.
The next visit offers the copies newer than their design's last save in
SolidCraft's own window, "Restore unsaved design: <name>, changed
<time>?", one window for several, with Restore, Open saved version, and
Discard. A page holds a Web Lock while it runs, so another open tab's
copies are never offered or removed.
With the preference off, the single autosave and the browser's prompt
work exactly as before.
* Web app: the restore window comes from the UI kit's recovery module (#10220)
The kit's text and divider helpers are private to the UI crate, so the
"Restore unsaved design?" window moves to recovery_ui
(browser_copies_window), beside the desktop recovery window, and the web
shell only maps its answer. Also keeps the window handle for the page
listeners instead of using the one moved into the app.
* Web app: restore window buttons sit in one row (#10220)
* Web app: keep unsaved work and still ask, unless told not to (#10220)
Keeping a copy in the browser no longer replaces the browser's leave-page
box by itself. A second option, shown once work is kept and on by default,
leaves the box in place; off, the box appears only while a copy isn't current.
* Web app: kept-copy review fixes (#10220)
A failed write of a kept copy waits 30 s before the next try, a recovery
copy is dropped only after the remembered saved file has opened, the
preference is documented under its current label, and the ui.prefs list
is sorted again.
* claim: #10223
* Quick-access bar: pin ribbon commands to the application bar (#10223)
A command's menu (a ribbon button, a section drop-down row or a command
search result) has Add to Quick Access: the command's own icon joins the
application bar after Save, Undo and Redo. A click starts it as its
ribbon button does, a drag along the bar reorders the buttons, and the
button's menu has Remove from Quick Access. Empty, and so not drawn, by
default; it holds up to 24 commands.
The list is kept with the toolbar's customisations (`quick_access` in
the toolbar's saved document), so it is saved, exported with the
keyboard shortcuts and carried by settings profiles.
* Quick access: a pinned family variant no longer replaces the ribbon choice
A quick-access click now starts the pinned command with start_pinned, so it
starts exactly that command and leaves the sketch family remembered choice
(the main ribbon button) unchanged.
* claim: #8517
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* web: editing embed for host pages (?embed=editor, #8517)
A host page that keeps the files itself and frames SolidCraft for modelling needs
the modelling UI without the application chrome. `?embed=editor` runs the web app
as such an embed:
- no application bar (logo, File menu, document tabs, update, help, report a bug)
and no start page; the layout is docked;
- the ribbon, browser, timeline and properties stay; Ctrl+Z and Ctrl+Y still undo
and redo;
- Ctrl+N, Ctrl+O, Ctrl+S, Ctrl+W and Ctrl+, are left to the host;
- nothing is kept in the browser (no stored designs, autosave, recovery prompt,
preferences or leave-page prompt), as with the existing viewer embed.
The existing `?embed&open=` viewer embed is unchanged. SolveApp gets one flag,
`embed_editor`, for desktop and test hosts too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* control: document.export / document.import / document.saved for a host (#8517)
An editing embed's host keeps the design itself. Three control methods
(window.solidcraft.request in the browser; the desktop control channel too; not
the agent chat's, whose method list is unchanged):
- `document.export` -> {name, revision, dirty, format: "json", text}: the active
design as a `.json` design file holds it. `revision` is the one
`document.revision` answers, so a host that follows the design compares one number.
- `document.import {text, name?}`: replaces the active design with that text,
timeline and parameters as saved, opened saved with a new `document_id`. It runs
as a design opened in a tab of its own, with the old tab closed without asking,
so whatever was open in the old design leaves with it. A text that does not read
leaves the design as it was. Waits behind a file loading or a design change, as
commands do, and evaluates on the window thread.
- `document.saved {revision}`: the host saved that revision; refused when the
design has changed since.
They are control methods, not commands: they act on the app's open design. The
browser API test gets a round trip through all three.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: aduijs <7501203+aduijs@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure
with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574
against strips 7881.678). That body is the strips' outside the block its patch lies in: its
rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails
where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at
most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is
that block; the upper one, at most the strips' volume, stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one
without it is refused ("saved model: rounds"), as is a model without any of its other lists:
the states, the preview and the thinned model all came back empty. The io tests' saved_model
and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part
stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made
by rounds: the list is empty, and every expectation stays as it was.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70)
Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point
classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's
knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles.
Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one.
The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing
changed), so the binding expects 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a strip's tangent and curvature run-offs are the distance long across the surface
SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects
CreateExtendedSurface until the parameter line through the side's middle is that long), so each
run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for
both. The parabola-length formula (418.18) was truck's.
Ruling d2 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: one smooth angle, and a round too small to change the part is refused
The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value
for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about
r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which
answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds,
tolerance / (sec(d/2) - 1). d is the least turn along the edge
(tangent_edge::least_angle_along, at tangent_all_along's stations).
Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest
radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth
(SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
smlib_chamfer turns the distance into a ball radius d sqrt((1 - c)/(1 + c)), c the faces'
binormals' dot (capi chamfer_radius); at #851's cusp the binormals agree, the radius is 0 and
the call is SM_ERR_INVALID_INPUT before the fillet executive runs (gdb: chamfer_edges sees
radius 0; the dump's why is empty). SolidCraft hands every chamfer to SMLib, so the
ball-contact chord (the ball of radius d: 3.822 wide at d = 2, 159.2365 removed) is SMLib's to
build.
Ruling d4 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the
corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib
fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is
ignored until it builds. It replaces the refusal test that expected TooLarge.
Ruling d8 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20
(the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the
The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner
cases the same SMLib (replay/1.0.1 and those commits) builds come off too.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow
their faces first and then what is left of the others; smlib_blend_dropping says which picks'
edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel
returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at
(0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on
its bottom front edge with the front left upright: the block is R21's alone, in closed form).
Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer
ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form,
where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the
known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife edge's 0.5 chamfer builds
SMLib's trim took a fillet meeting its face at more than 78 degrees for one with no side
(smlib-batch-4-rulings 971e567); the chord of the knife edge's 0.5 chamfer meets the flat face at
81 degrees. The case comes off the known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its
loop's normal, summed from the cross products of its chords, pointed down;
fixed in SMLib). With the fix every letter grows, and the join builds at 3°
and 15° by the Round rule and by the default rule (tangent for spline
outlines), where before 15° was expected to be refused.
Exact where the outline derives it: a letter's section at height z is its
outline offset by e = z tan a, by the Round rule of area A + P e + C e² while
the offset trims nothing (Steiner; C half each loop's turning less
tan(t/2) - t/2 at each reflex corner), so the letter is
A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o
at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its
mass properties integrate to 1e-8). The concave joins of r, n, g and e are
tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the
formula), the t's by 15° (9.9e-5 over), and on the block the letters grow
into each other, so the whole word is checked for what holds exactly: one
closed body with the block, and half-way up every point of each straight
letter's outline inside the solid (the t drafted inward failed that).
With SMLib's fix (smlib-batch-4-text-loops 82133b2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges asked G1 at every blend seam. Its front wall
leans 19 over 20 and the others 10 over 20, so at each rim corner the two mitred rounds meet the
sloped corner edge at different heights (0.155625 and 0.276393 below the top): the deeper round
runs on past the corner edge and is cut by the plane of the other's wall, a crease by
construction, the gap below the shallower round filled on that plane. The check now measures
the rounds' contact seams, on the top and on each wall, where the rounds are tangent. The
volume is unchanged.
With SMLib smlib-batch-4-mitre (1c15364): the case passes (V 144530.427946 against
144530.427909, 15 faces, sound); before it, only the four corner creases failed the check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* smlib: Brep::classify_point says exactly where a point lies against a body
Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone
tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a
vertex. A box and a cylinder just off its curved wall in measure's tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::classify_point decides inside, outside or on the boundary exactly
SMLib's point classification at the body's own tolerance, on the exact faces and edges, in
place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point
within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh
body's triangles are its exact shape: on them within the record's tolerance, else by ray
crossings. The kernel's own probes move to it; Body::contains goes once its last callers have.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* doc: a hole decides whether it exits at its drill point's shoulder exactly
Material past the depth needs a body with the point inside, air before it needs every body to
have it outside; a point within a body's tolerance of the exit face is neither.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* engine tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* ui, cli tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::contains, the mesh test, is gone
Every caller asks Body::classify_point now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds
waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it,
SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64
Linux and are no longer ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
The gate on aarch64 Linux reports 16 fillet cases FIXED with the pinned SMLib: the sloped and
equal-slope basin rim chamfers and rounds past their rims (1080-*, 5835-*), the pocket rim
chamfer past the floor, and the three pocket rim rounds now mitred at the pocket's corners
(every-pocket-*). No other area's gate reports a case fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: the re-blend's removed picks formatted as rustfmt lays them out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: blend_smlib laid out by the 2024 edition's rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet: the radius-too-large choice in plain nouns
"If too large: Stop and say so / Largest that fits / Narrow where needed"
becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in
every language of the catalog, with the error and the tip that name them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: a round that would cut through its wall into a hollow is refused
The owner's rule of 2026-10-30: a round running past a rim of its faces
into open air builds; one whose section would remove material through to
a hollow behind its edge (a slit into the hollow, a cut through the part)
is refused as too large, so the fillet names the largest radius that fits.
Decided exactly in the section of a straight convex edge between planar
faces: the round's centre is at depth r below both planes, and it opens
where its arc uncovers a boundary point strictly inside the wedge with no
material beyond it toward the centre (the body's exact point
classification). Looked at: straight edges parallel to the round's (a
hollow's corner), cylinders about parallel axes (a rounded corner), and a
picked concave parallel edge's own round, which fills the corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
The round's centre (32 - r, 42 - r) leaves the hollow's corner (30, 40)
outside its circle, opening the wall, where sqrt2 (r - 2) = r: the case
expects the refusal naming 6.828. 2852's R30, refused naming 25.24, now
passes too: both come off the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
`cargo xtask known-failing --junit PATH` reads nextest's junit (a file, or every .xml under a
directory, so all of a run's junit artifacts at once) and fails on a test that failed and the
list does not name, and on a listed test that passed (FIXED: take its line off, as the kernel
rig's gate does). A listed test that did not run is neither, since a pull request tests only the
packages it touches. The list has the rig's KNOWN_FAILING format (`<test> <cause>`, sorted, the
rig's own parser), with `<test>` nextest's `<binary id>::<test name>`; `cargo xtask lists`
checks it is sorted. The list starts empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
Native Linux tests and the GPU path test shards no longer fail on any failed test: nextest's
"tests failed" exit (100) goes to `cargo xtask known-failing --junit`, which fails on a failure
the list does not name and on a listed test that passes. Any other nextest exit (a build error,
a bad filter) still fails the step at once. The tests skill says to list a failing test with its
cause, in place of ignoring it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the known-failing list takes develop's 10 failing tests
Develop 38fd4a4f6 (CI run 41157648345, after the SMLib eaa998a pin) fails 10 cargo tests; each
is listed with the cause its failure message gives. Seven are SMLib refusals or results off
their derived volumes (fillet, chamfer and shell), the cli action matrix and naming corpus
among them; the two corner_g2 tests are the fitted G2 corner patch bulging past the box, which
the explicit G2 corner fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
Develop 38fd4a4f6's Reference tests fail 34, 35, 77, 78 and 81 (STEP export finds fillet edges
4.6e-5 to 6.1e-5 off their surfaces against 2e-5), 37 (the apex blend 0.193 off), 80 (the
taper-to-fit area) and 83 (thicken status 1001). Each expected.json names its cause in
known_failure, which the oracle already reads: a known failure that passes fails the job.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sweep path: a curve of several pieces is turned round whole
The path chain oriented its first piece, not its first curve: a first curve
of several exact pieces (a fit spline, an ellipse, a projected free-form
edge) was never turned round, so a path whose next curve meets it at its
start was refused as "not connected end to end". The chain now orients
curve by curve: the first runs toward the second where they meet at one
end only (else from the end nearest the profile), each next one starts
where the previous ended, with one joint tolerance for both questions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 2fc375f (tangency-labs/smlib#71, #72, #73)
A sheet's side is extended exactly the distance asked, or the call says it cannot (#71);
NVIDIA's -Werror build passes again (#72); a body splits by a sheet of several faces as it
is, smlib_split_body_by_sheet (#73). The C API is ABI 6 (the new entry), so the binding
expects 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Extend grows a surface of several faces face by face
A surface body of more than one face (a fit-point spline's spans extruded, #3830) was refused.
Each face with a picked edge is now extended alone by SMLib's extension of its surface, and the
faces are sewn back together, each the face it was. A side that lengthens onto a face meeting it
tangent takes that face along, past its edge continuing the picked one; across a crease the
neighbour grows only when its edge is picked too, otherwise the extension is refused. Faces whose
lengthened sides no longer meet are refused. Up to a target keeps the pieces every grown face
lies in.
3830's extensions now build; its split still fails (the tool point picks one span, and a face
tool cuts with that face's surface alone), so it stays on the list with that reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
A face tool cut with that face's surface alone, so a face of a surface body made of spans joined
tangent (a fit-point spline extruded, #3830) cut nothing where its span ends inside the body.
Split Body by a face of a surface body now takes the faces joined to it tangentially (the exact
check Extend uses, within the one angle for smooth) and slices with them as they are, through
SMLib's slice by a sheet (smlib_split_body_by_sheet, tangency-labs/smlib 7a01f1b), its sides those
of the picked face. A sheet that only nicks the body cuts nothing, as before; a lone face, or a
face of a solid, still cuts with its surface extended.
3830 comes off the booleans list. Its answer counted the two halves of the cup and not the surface
that cut it, which stays as a body of its own (4879 removes its surface for that reason): three
bodies, the volume unchanged.
Needs SMLib 7a01f1b pinned (SMLIB_REV, prebuilt; its SMLIB_ABI_VERSION 6, which crates/smlib now expects) to link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
The tangent and curvature run-offs of the quarter cylinder r 10 strip, 5 across the surface,
are its section swept 20 along z: exactly 10 pi/2 20 + 5 x 20 = 414.159265. measure is SMLib's
integration on the exact surface (1e-8), not a mesh, so the run-off check is 1e-6 relative and
the 'measured on meshes' notes go. Red until SMLib's extension is solved to its distance
(smlib-extend-converges 590d8a1): eaa998a's curvature run-off is 4.986 long, area 413.882.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a control spline can carry its own knots and weights
A sketch spline over control points was always the clamped uniform B-spline
over them, so a free-form edge whose knots are not evenly spaced (or whose
weights are not 1) could only come into a sketch as one curve per Bezier
span. A control spline now may save `nurbs`: its clamped knots and its
weights. Its points, polyline, exact pieces (one a knot span; conics for a
rational quadratic), the solver's distance and curvature, links, parallel
re-projection and inspect.sketch all read them; a loaded design's are
checked. One pending format file (spline-knots).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch projection: a free-form edge comes in as the one exact spline it is
A projected spline edge of several Bezier spans came into the sketch as one
curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path
naming the corner named one span of it (#3604). The kernel now reads such an
edge (a spline, or an elliptical arc of several spans) as the one clamped
B-spline it is over the edge's interval, its knots and weights its own, and
the sketch takes it as one control spline whose ends sit on the edge's
vertices. Planar regions still read edges span by span. The 3604 case builds
with its original path and leaves KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
The owner's ruling: a round or chamfer that runs past an outer edge of its face into open air
builds, tangent where it has room and cut by the face beyond where it runs out. SMLib's branch
smlib-blends-past-rims builds them by the rig's analytic answers. Off the known-failing list:
the disc's rim past its 2 mm wall (190), the hole's top rim R12 past the plate's bottom, the
chamfer past the cylinder's bottom (2893), each closing on the wall continued as itself, and
926's chamfer ending on the boss's wall, which now builds to its answer too.
The sloped basins' R4 rim rounds (1080, mitred rounds built together where one overflows) build
to their analytic volumes (to 6e-9), and stay listed with that reason: their continuity check
(g1 at every blend seam) takes in the mitres' creases, G0 by the mitre ruling.
2893-chamfer-two-distances-elliptical-rim is graded as a solid (the owner: it builds) and stays
listed, waiting on the ruling on unequal chamfers along a rim whose angle varies.
5158-fillet-round-just-past-a-10mm-face stays listed with its cause found: the round passes
5e-6 under the box's top back edge, inside the body's tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: test that a round of a round's end has no seam with that round's faces
The r1 round of a block's top edge, chained onto the end curve of the r2
round of its arc at a cylinder (rig fillets/every-block-cylinder-crease-
top-edge-after-arc-round-r1), ends where it runs into the cylinder. That
edge is no seam of the r1 round: the cylinder is a face of the r2 round,
not of the r1. blend_seams takes it for one today (the r2 round's name
F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a
contact seam at 60 degrees.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: a blend's seams split its edge's name at the | between its two faces
A blend face's name holds the edge it replaced, <face>|<face>, and a side
of that edge can be a blend face whose own name holds a |. Whether a face
is a contact of the blend was read as the edge's name starting or ending
with the face's name next to a |, so the r2 round's own face F2:side read
as a contact of the r1 round F4:blend:F1:+y|F3:blend:F1:+z|F2:side. The
edge's name is now split into its two faces, a blend side read whole as
the two faces of its own edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: five refused blends build, off the known-failing list
926 (the chamfer ending on the boss's wall), the oblique cut's r0.1
round, the every-block r1 round (its seam with the cylinder is no
contact seam, after the blend_seams fix), the up-down squares' concave
chamfers and the shelled box's lip chamfer build with SMLib branch
smlib-blend-refusals (f8650b8 and later). 1207 r0.5 passes SMLib's check
on its rails now and stays listed for the next cause: its end rib on the
boss, which starts where the round and the boss are tangent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the trough and the pocket whose floors fall to a drain build
SMLib now offsets a vertex where four faces meet (two walls and two facets at the floor's
corners, four facets at the drain) to two vertices joined by a new edge (tangency-labs/smlib
branch smlib-shells). Both volumes match their closed forms. The pocket's lining, hanging from
the top's rim round the pocket, stands apart from the slab's outer walls with the cavity rising
between them to the open top: the case says two shells in the one body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the plate with a hole through its arc side shells open at its far end
SMLib's merge now intersects the offsets of an edge's faces where they could not be mated along
it (the hole's offset poking out through the half-round side's; tangency-labs/solidcore#1795):
one closed valid solid with the one face open, as the owner ruled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the ring cut frame and the up-down join shell
SMLib's inset now keeps only the regions that are cavity, not the one the offsets close where
they overlap (between the two faces of #545's 0.5 floor, round the up-down join's two empty
octants). The frame's core under the recess is hollowed to a sealed void, so the case says two
shells and its closed form, 21044 mm³.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
SMLib keeps the skirt top's offset where its loops wind the other way under the opening, the
cavity's floor (the owner's ruling of 2026-10-31: build it; a lip thinner than the wall is no
break-through).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
The ring cut frame's and the up-down join's shells build now, and so do the up-down join's and
modern-plastic's chamfers (SMLib smlib-blend-refusals). #616's lid in the corpus still fails
SMLib's loop check, the shelled box shelled again at an inner wall is unchanged, and the
oblique cut of a cylinder's fillet still fails SmSurfOfRevolution's Test #7: 3 actions of 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib history test: every operand's order is the identity on its record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: rustfmt the board fixture example and the coplanar asserts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: fillets keeps one case per regime; 17 replications of a case in the same regime go
The sloped-basin chamfers and rounds at 0.5 mm rims repeat the 1 mm rim's regimes; two of the
three knife-edge chamfer tips, the r1 and box r3 curvature corners, the r1 tangent corner, the
1 mm pocket-rim and hole-rim chamfers short of the floor and the r1 together-round each repeat a kept case's regime
and grades. #854 moves to 851-chamfer-arc-top-edge-9-5, and the cases that cited a dropped one
cite the kept one or state its formula.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: five cases outside fillets repeat a kept case's regime and go
A square cut is the slanted plane's ordinary crossing; the cam's half turn is the quarter turn's
contact at a symmetric angle; the r15 slab stands inside the same coincidence tolerance as the r10;
the 90 degree unfold and the 40 degree flange repeat the 72 degree and 20 degree cases' formulas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two G0 window patches graded on the box the part they close keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the cut mirrored loft graded on the box its sections pin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases
wait for the new algorithm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by seams alone runs its loop the other way, never turns over
A loop that uses each of its edges once each way (a whole torus within its tube and ring seams)
is the same set of uses run backwards, so it says nothing of the face's side. One written
clockwise in (u, v) turned the face over, against its same_sense: the torus came in inside out
with a warning. Such a loop is now reversed and the face keeps its side.
Test: seam_only_torus_imports_as_a_whole_ring, both orders of the two seams, volume 2π²Rr².
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by a slit alone is the whole of its closed surface
A loop that runs out along a chain of edges and straight back (a meridian from a sphere's pole
stopping short of the other, out and back) encloses no (u, v) area, yet on a closed surface it
bounds all of it less a cut of none. The reader only read such a face when the slit already ran
pole to pole (and moved the sphere's frame onto it only then), so the 2 mm ball whose meridian
stops at 2.5 rad was refused for its empty loop.
The slit is now made the face's seams, so its loop bounds the surface's whole domain: on a
sphere, a revolution whose profile ends on its axis, or a spline closed round u that collapses
at both ends, the slit's meridian is run on to both poles, out and back (a sphere's frame put
on the slit first, whichever two points it joins); on a torus, the circle the slit lies along is
closed and the other circle through its start is the second seam. The seams on a sphere are its
own meridians (angle 0 on the equator), so their pcurves are exact lines on its form.
Tests: non_antipodal_seam_sphere_imports_as_a_whole_ball passes (its known-failing line goes);
seam_only_torus_imports_as_a_whole_ring adds a torus bounded by a slit along its tube.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues:
the reported part's bar (with the sketch solver's residues) whose sides run tangent into the
cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face
bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight
box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch
stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg corner at r5 and r7
Two more fillet cases, the reported part's concave arc and front top edge rounded together at
r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's
tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the
bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: blends that end where their face runs tangent into another
Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far
end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent
into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top
tangentially there. Each blend ends on a face tangent to the one it rolls on.
- Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at
r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a
semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and
G1 seams, or the analytic volume where the blend has a closed section.
- Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along
x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after
the other (1 then 2).
- STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges
rounded together.
- A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator,
its front edge alone and both edges together.
The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic
cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not
along a seam, so it is not this ending.
On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status
1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5
out of the front face, and the rounds meeting with normals 180 degrees apart where their
contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted
peg (its corner refused as unsupported).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: fillet corners graded curvature-continuous, the default to be
Six fillet cases that pick their edges with no type, so they take the fillet's default, which the
owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as
an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body:
- an oblique convex corner (a block drafted 15 deg);
- a four-edge and a five-edge apex corner (pyramids lofted to a point);
- a pocket's concave corner;
- a mixed corner (a step: one concave edge, two convex);
- a corner beside a cylinder (the top corner of a half cylinder).
All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round,
whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two
rounds at 8.45 degrees (G0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's front chamfer builds
With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge
crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that
carries that fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the curvature-continuous corner cases pick the curvature fillet
The six corner cases added in 3a854104a took the fillet's default type, on the premise that the
default would become curvature-continuous. The default stays the circular round, so each case
now asks for the curvature fillet itself (type curvature: curvature-continuous sections and
corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one
valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*.
The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as
KNOWN_FAILING now says:
- the corner beside a cylinder: the curvature fillet builds its sections only between planar
faces;
- the four- and five-edge apex corners: refused because the default setback is shorter than
where the rounds' contact lines meet (3.90 and 3.51 mm from the apex);
- the mixed corner: SMLib sets back a corner only where its edges are all convex or all
concave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the
concave chamfer's rail on the cylinder ends where it crosses the seam along which the front
face runs tangent into the cylinder, continued past the vertex, and its end rib on the front
face is built from there. report-peg-concave-chamfer-d2 and
report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two
chamfers together still fail, now at the mixed-convexity corner where they meet: its line says
so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168,
kernel lib only its listed failures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: constant rounds of the exact classes, and a tee's round
A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a
cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines
are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2),
(2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on
its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that
SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
The rounds now come as the rational surfaces their classes give, closed ones as two faces split
at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees.
Their KNOWN_FAILING lines go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
Twelve listed cases build on the new blend's end event and exact classes, or were already
built on develop: they come off the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the
round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and
graded on the exact volumes, and come off the shell known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Drawings hidden lines: read develop's B-rep records
Edges come from the record's edge list, cut to their interval (C3::of_edge), and
faces from its face list; a cylinder, cone, sphere or torus chart takes its bounds
from where its NURBS form lies on its label (S3::of_face). A rigidly placed
revolution has main's revolution chart; other placements stay refused. Moving a body
to its centre goes through Brep::moved. Loops are read against the natural normal of
the face's parameters where a chart wraps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden-line fixtures: build develop's records from the fixtures' data
Fixtures keep their bounded curves and surfaces and their own edge numbers; a private
builder makes the canonical record, and the local prepare puts the edges back in the
fixture's numbering. Assertions are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: tests of the bounded edges, face charts and placed revolutions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* drawing-hlr doc: what is drawn and refused on develop's records
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* hlr tests: a placed revolution is refused when its placement is not rigid
The new model has one record for main's Revolution, which was drawn, and its
PlacedRevolution, which was refused. An identity placement is now the former, so
this test's fixture takes a non-rigid one. The refusal it asserts is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
A leader off either surface is refused like a curve with no spline to follow. Tests: a traced rim
drawn on the circle and plane within tolerance, the same leader 1 mm off refused, and kernel bodies
with arcs through the production prepare against closed forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: kernel bodies through the production prepare against closed forms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Tests from main: the world state is a Result here
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A blend's pick measures close edges on their curves, not their polylines
A polyline can be a chord off its edge, more than two edges are apart near a
tangent point. A pick exactly on a ball's rim took the straight edge the rim is
tangent to, and solidcore built a chamfer of that edge with a clean check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
(cherry picked from commit c786db6bf4)
* Merge fixes from the first SMLib test pass
Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step).
A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another
order, and the swap left the name on a piece of the wrong feature.
A replaced analysis keeps its status slot. A command with no world picks does not place the model
first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the
touching key the merge added; only the contracts that read it take it.
Two of main's tests listed as failing on SMLib, with why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Merge fixes from the ui test pass and the gates
Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the
messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's
comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its
tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay
pressed while on. Two of main's ui tests listed as failing on SMLib, with why.
Gates: fixed thread tables become slices, one collapsed if, rustfmt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A silhouette takes its facing from the surface's normals
A flat triangle beside the outline can tip the other way from the surface it approximates, and its
edges joined the outline. On SMLib's sphere that made 192 segments instead of the equator's 64, 100
curves and 95 profiles from the tight fit of #7989. Each corner's normal is used where it is close
to the triangle's own; a mesh without such normals (none, zero, not numbers, or averaged across
creases) keeps the triangle's normal, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Clippy and rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Stepwise open checks every feature under the session's mode
OpenSteps::start evaluated under the default check mode, and finish kept those results under the session's mode: an each_step or off session opened in steps recomputed nothing. start now takes the mode (the app passes its session's), and a mode that changed before finish evaluates the design again under the new one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Clippy without SMLib: the planar-sheet edge reader is built only with it
Its one caller is in the smlib-only sheets module, so without the feature it was dead code and
clippy -D warnings refused the kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
Eight fillet cases for the blend's cross-section by its order of contact with the faces, each
graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next):
- a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the
areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default
thumbweight's definition;
- a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of
the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each
section's added area by Green's theorem along the plate, the section and the pipe's arc; the
order-2 section is built from the faces' feet of the point at distance d from both, which on
the pipe are not linear in d;
- a boss root curvature-rounded 2, the square corner's section revolved (Pappus);
- a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone,
and the volume is the cone's sections integrated along the edge.
Three fail today and are listed: the two curvature rounds whose faces are not a square corner of
planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the
variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib
7ac037e.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two
planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment
about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases
built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket,
every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their
volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x
up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the
distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and
G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on
the plate pass on SMLib's section and leave the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a
square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests
and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate
from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed
until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4):
Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns
the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded
less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to
1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet
takes a turn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the
ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the
blend rework too) and the Y junction (refused for room at its triple points).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope
removes; the law with a corner is its own test, listed as failing until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
removed_by_balls integrates, in each plane square to a right-angled edge, the corner the union
of the balls leaves (by rays from the edge, the least entry over the balls), cut to the body's
section. The law with a corner through a middle point is its own test, listed as failing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: a spline radius whose balls fold over one another at its peak is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within
1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed
as failing passes on SMLib's step 3 and leaves the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
The new section builds their edges on the surfaces, so STEP export no longer finds them 4.6e-5
to 6.1e-5 off. develop's Reference tests (60393a718) report all three as passing while marked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
A sphere split into two halves along a circle about its axis, each half covering a pole with no
seam, gets a seam per half from the first vertex of its loop to the pole. The circles between the
halves group their frames so they turn together, and when the two seams are not a whole number of
quarters apart no one turn fits both: the group kept its frames, a half's form ran past one turn,
SMLib's trim (SMLib and solidcore alike) across the form's end crossed the face, and the mesh
folded over the ball (a rotor's ball showed torn; its half had 196 times its area in triangles).
When no one turn fits the group, each spilling face is now turned on its own to start on a quarter
line. On the rotor file this also clears three other faces that were filled leniently and a
0.076 mm edge gap; regression test in step_in/tests.rs with the area and volume of each half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
(cherry picked from commit b3188e005d427043b918267449c2336a1777e54f)
* SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
A variable round is the envelope of the balls rolled along the edge, which takes less than a
quarter round in each section. The expectations are now that union, the law continued past the
edge's ends along its end slopes, integrated by Gauss-Legendre panels in x and t; 2, 4 and 8
panels agree to 1e-9 of the body's values, and 77's removed volume matches a brute-force union of
balls to 2.5e-10. The nearest-ball search now scans the balls the ray meets around ball x
(|x - s| < r(s) sqrt(sin 2t)) on their own, which near the faces and where 78's radius closes to 0
are narrower than the global scan's step. Regenerating keeps each case's known_failure. 79, a
constant radius, is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
SMLib builds a variable round's law corners as its balls' union (the corner
ball's zone at a dip, the sides' crossing at a peak): the kernel's corner
through a middle point (39.5410) and the crate's 4 -> 2 -> 4 law (39.5421) pass.
Rig 1207 (the bar's top edge rounded after the boss's arc, r0.5) builds and
grades on the same SMLib; it failed on c820346.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: every fillet and chamfer case rounds its tangent chain
The owner's ruling of 2026-11-01: the rig and the ladder round with tangent_chain true, how a
user's default pick behaves. The 38 fillets-area recipes and the ladder's 07-fillets/016 and 018
that passed false now pass true. The shell recipes keep theirs: a shell's tangent_chain is its
open-face chain, a different feature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
Where a case's point is one edge of a tangent chain rounded alone, a copy keeps tangent_chain
false as its own case (SMLib rounds exactly the picked edges, ending at the smooth vertex); their
expectations stay as they were, to be re-derived:
- fillets/1207-fillet-box-end-edge-into-unblended-round-partial-chain;
- fillets/every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain;
- fillets/1207-fillet-bar-top-edge-after-boss-arc-round-partial-chain, renamed from
...-no-tangent-chain: with the chain on it is exactly 1207-fillet-bar-top-edge-after-boss-arc-round,
which the rig already has;
- ladder/07-fillets/020 and 021, the r5/r3/r7 and r5/r3/r2 corners (016 and 018) with the r3 on
its edge alone: with the chain on, the r3 runs on along the r5 round's end arc and down the
vertical edge the third round was to take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
fillets/every-block-cylinder-tangent-concave-arc-r2-partial-chain: the pick takes one piece of the
concave half circle, which SMLib splits; with the chain off its other pieces are left out, and the
blend is refused at the piece's end (the base gate's outcome). With the chain on the case rounds
the whole half circle. The copy keeps its expectation, to be re-derived.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two chains that now build graded by their exact volumes
With the tangent chain on, two cases round more than the edge they pick, and their old
expectations were the single edge's:
- 1207-fillet-box-end-edge-into-unblended-round: the r1 chain is the end face's top edge, the r3
round's end arc and the back upright; 34 A + (pi/2) A (3 - c) by Pappus on the arc:
V = 7953.139216 (it built 7953.139216, the old 7957.505 passed only inside 1e-3), 10 faces.
- 851-fillet-top-front-then-front-left-upright: the upright's chain runs up the first round's
end arc on x = 0 and along the left top edge, so the corner becomes the R2 ball's eighth:
V0 less the first round's spandrel to the wall (35.344727) less 27 (4 - pi) + 2 pi/3:
V = 9530.777979 (built 9530.777987), 10 faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
- every-fillet-after-fillet-curvature-front-then-side-r3: the side edge's chain runs round the
first curvature round's end curve, whose radius of curvature has a weighted mean of 3 (its
setback) and is unbounded at the ends, so somewhere below 3: the size-3 blend's contact line
folds back on itself. Refused, "larger than the faces beside its edges allow", as ladder
07-fillets/016's r7 on the r5 arc. (It was solid or refused for running on tangentially.)
- every-block-cylinder-tangent-concave-arc-r2-no-tangent-chain: the chain takes every piece of
the half circle and ends at the convex edges it runs on into; it builds the analytic 19091.9620,
so the outcome is solid (the refusal alternative was the chain-off one's).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright: with the tangent chain on,
each R2 chain runs along the end curve of an R2 round on a curved face (the arc round's end on the
front face; the first round's end on the wall), where the rolling ball sits on that round's own
centre line, so the piece is the ball about (39.2538, -19, 8): the three-edge rolling-ball corner.
SMLib fails with status 1001; the same piece on a plane end arc builds (front-left upright).
Expectations unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
With the tangent chain on, 016's and 018's r3 runs on along the r5 round's end arc and down the
vertical edge, so the third pick (60, 40, 8) is 3 from both of that round's contact lines and
names no edge: refused, asking for a point along one edge. The corners they were made for are
020 and 021 (the r3 alone), whose golden entries are 016's and 018's (021 measured on f12a101).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
SMLib's Ball corner is always the rational patch exactly on the sphere (owner ruling, blend
design §23), so the corner counts as an 'other' face beside the three cylinders and six planes.
The removed volume still checks the corner against r³ − πr³/6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
The round's cylinder keeps the frame it was made on when it is turned (SMLib's SwapUV no longer
re-derives it): its origin sits at x = −20 on the same axis line, (x, 2, 8) along x, radius 2.
Same cylinder; one number in the record moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
On the CI runners the boss root and the hole rim, both size-2/size-1 curvature rounds, build
correctly but take more than 180 s: the order-2 section's span certificate and the round's
definition are evaluated station by station. The per-case limit is the one the thread cases use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Lid ring sketch test: find the ring under the pick, not by main's kernel's name
On SMLib the lip join's exact history names the lid underside's ring a piece
of the lid's own start (F14:start#[...]), as the naming rule says for a face
that came from the feature's input; main's kernel named it after the case's
top it rests on (F2:top). The test looked the ring up by that name and so
stopped before the attachment it guards. It now takes the underside piece
under the pick point, which the cap certificate attaches on either kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Viewport culling test: each box's triangles from its mesh, not 12
SMLib meshes a 10 mm box in 108 triangles, so the hard-coded 12 a box stopped
the test before it reached the culling. The expected counts are now each
body's span in the scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Timeline chip test: a fillet that really reduces
The R20 fillet with fit reduce on one top edge of a 10 mm box builds on SMLib
without a reduced-radius warning, so the fixture had no warned feature. It
now rounds the four vertical edges at R6, reduced to the full round (5), as
the copy-warning test beside it does, and checks the warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
A seam's two sides are the same face, and edge names list each face an edge
bounds once, so SMLib's extruded circle names its side's seam F2:side:c1, with
no separator. The name grammar now says one face also means a seam. The #5858
test no longer counts one '|' an edge: every part of every edge name is a
whole face name of the edge, one per face it bounds, two for the rims and one
only for the side's seam (checked to run bottom to top on the circle).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
SMLib's setback corner takes a G1 fill only once certified convex, and refuses a setback too
short for that as SMLIB_ERR_NO_ROOM with SMLIB_FIT_SETBACK_AT_LEAST, the smallest setback that
builds. The kernel reads it (solidcraft-smlib binds smlib_blend_fit_size) and names it; the
Fillet dialog says it in plain words. Other room refusals keep their words. The r5 box corner
set back 5.5 is refused naming 5.962, which builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
Each round runs whole to its section square to its edge at its setback (the owner's rule, at
least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the
setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1.
Outside the box the sections span the body is the three strips', so its volume is theirs within
that box's. A later r3 round at the mitred corner makes the body all three at once make
(7928.142563938, 15 faces), as the engine and the model-cache tests have it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
A primitive cut skips the sheets kernel::apart (exact bounds grown by the record tolerance)
finds clear of its tool; the bend check leaves the clear case to kernel::boolean, which answers
it from the same exact boxes with no intersection work. The mesh-box helpers are gone, and their
four lines leave xtask/mesh-decisions.txt (172 sites left).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: AGENTS.md loses a stray merge-conflict marker line at its end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
Main made vi a complete catalog; develop's new message (ui.fillet_error_setback_short) had no vi
entry, so every_complete_catalog_carries_every_english_message failed on the merged tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
1213: the loft is a cubic skin through the five sections (ellipses between
them), not a torus; its volume 131601.597487935 by quadrature less the exact
rolling-ball removal 233.662461919 gives 131367.935026 (was a Pappus estimate
on a torus, 131360.148, at rel 5e-4).
4782: the section's area in closed form, 25 pi/3 - 5 sqrt(75) + 25, so
V = 630.2934873 (was a grid estimate, 630.293125).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
They take 37 s and 34 s alone on the box, but CI runs 8 cases at once on slower runners. Their
G2 certificate cost is the open item (tangency-labs/smlib#106, moved to solidcore#2344).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
Develop's list was taken on develop alone. Main's code (tap-marking reach, cut and hole box
checks, join pieces, print faces, placed measuring, selection items, imported mesh payloads) and
the branch's own exact_edges and named_vertex use meshes too; three listed functions were renamed
by main (face_outline and plate_recesses into FaceSlice, paste into build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* After the merge: main's new tests on the SMLib kernel
- Cut To the far side of a curved wall (#8634): the tool stops past the first crossing of the
face ahead of the profile; SMLib's whole bore is one face that a line crosses twice, so the
single-crossing rule found none and the cut took nothing.
- Clearing view analyses goes through refresh_display, as main's #10687 made the others, so an
open feature editor keeps OK and Cancel after Zebra.
- vi, a complete catalog on main, gets the setback-too-short message.
- fillets/KNOWN_FAILING: 4782's cause is now its continuity check (SMLib f916a8d builds the
expected volume).
- Known failing, as main's tests assume truck: the spline wall's spans as one mesh patch, a
hole touching an edge at a point leaving one body, and a copy of a copy's triangles matching
a fresh mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
A twist about a straight path maps a profile circle centred on the path's
line onto itself, so its swept wall is exactly the cylinder. The skin
through the stations stayed within 3.9e-9 of it (6.6e-9 on the outer wall),
and a boolean with another body on that cylinder failed with status 1001
(solidcore#2184; the kernel's handling of a B-spline face lying on a
cylinder stays open there).
sweep_controlled now builds those walls exactly when the path is lines
along the profile's normal and there is no end scale or rails: a profile
whose every loop is such a circle is swept untwisted, and such holes in
another outer loop are cut as exact cylinders from the skinned sweep of
the rest. Other loops, and an axis-centred arc inside a loop of other
curves, are skinned as before; a failed cut falls back to skinning all.
Regression test in smlib_sweeps_tests.rs: #2184's tubes joined at 10, 16,
18, 20 and 30 degrees give one closed body of 11.5625 pi with cylinder
walls; a twisted hexagon with the bore keeps a cylinder bore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU
* After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- `hole_misses` (main's #10701, through brett's branch) decided from the targets' mesh boxes. It now uses their exact boxes (`Body::exact_bounds`). An unknown box still leaves the hole not known to miss.
- With #10303's two shortcuts and `hole_misses` off the mesh, `body_box`, `mesh_box` and `padded_box` have no caller left, and are deleted.
- `project`'s intersection link passes its one face to `meeting_edges` as a one-element patch. This branch picks one face, not #9009's mesh patch.
- xtask/mesh-decisions.txt drops the six sites that no longer use a mesh here: `apply_traced_with`, `cut_end_past_face`, `beyond_cylinder_reach`, `hole_misses`, `body_box`/`mesh_box`/`padded_box`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
`frames::split_move` returns a Result on this branch: an unplaceable model is an error, not a silent no-split.
- Move/Copy of a component (main's #9914) propagates it, as its other calls do.
- `to_local` had the solid.move check twice after the merge (brett's Option one and ours). Ours stays, after the no-picks/not-placed return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: main's two new tests take world_state's Result, as the rest of their files do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it.
Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere:
- Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre.
- Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`.
- STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included.
- Iso curves and SSI of the label are refused; the face's form is what evaluates.
Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds.
Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Since f916a8d:
- #120: every target again, plus the warnings fix;
- #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit;
- #122: tests gated on counts;
- #123: the Mixed corner;
- #124: the End at a smooth vertex;
- #125: four or more rounds, and open setbacks;
- #126: the equal-area thumbweight guard;
- #127: the trunk merge.
The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* smlib export tests: rustfmt's line for the rounded cube's edge midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all.
New failures, recorded as they are, each with its reason. They passed on f916a8d.
- **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume.
- **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only.
- **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added.
Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input:
the union's post-process keeps pointers to edges it has deleted. A golden
entry's `unstable` reason makes the gate compare that case's status only
and name it in its output; recording keeps the reason, and only an edit of
the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge with main: its new code on develop's exact bounds, types and thread fields
- The sheet cut's cull (#10301) and the tapped wall's (#10227) use each
body's exact box (`exact_box`), not its display mesh.
- model.threads replies with develop's thread fields: form, hand (right,
left or both) and starts.
- surface.boundary's schema checks a network curve's continuity as the
handler does, and words a list entry's error as it does.
- Main's new tests take develop's Hole fields and world_state's Result.
- mesh-decisions: contact_sweep's triangle check is now `depth` (main
split `hits`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now
Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that
passed on f916a8d, and passes two listed ones. Each new line says what the
test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause.
shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and
oracle 37-pyramid-apex-blend pass and leave their lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's six new sketch-only commands are exempt from a kernel case
sketch.construction_line (and its horizontal and vertical forms) and
sketch.spline.insert_point, remove_point and reverse change only the 2D
sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- The per-target cut loop skips a body whose exact box lies clear of
every tool's, as main's version did with mesh boxes. The sheet culls
(#10226, #10301) and this one now leave the far sheets and bodies alone:
a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the
known-failing list.
- a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face:
a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is
far past the bodies' tolerances); touching and 0.1 mm in still cut.
- Known failing, with reasons: main's edge lookup by a stored point
(#11286, on the display mesh) is not taken; SMLib refuses the
wrong-way chamfer for its tangent chain first.
- EXEMPT: main's eight new sketch-only commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
62 of the commands main added change no geometry: the view and render
panes, rendering lights and results, appearance tools, settings profiles,
point clouds (drawn as points, never a body), the selection, two sketch
edits, component links and History bar visibility, edit.repeat,
timeline.play, inspect.compare_picture (a picture against the outline),
and component.paste_from_design, which pastes the app's cross-window
clipboard that no command fills. Each joins EXEMPT's first section under
its family's reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: construct.plane.axis_point gets construction cases
The plane through a box edge and its far corner, graded against its
closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal
of a point on the axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass
0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2
by the parallel-axis theorem.
- occurrence.align: a block's end face onto a base's top face: a quarter
turn about y, centre (70,20,20), box (65,15,10)-(75,25,30).
- joint.find_limits: a slider between two stops: min -20, max 10 mm.
- component.move_features, browser.reparent and
component.move_sketches.to_parts: items moved into a turned and moved
part keep their world place (volumes, centres and boxes by hand).
The mass case assigns a material it creates, so material.create and
material.assign leave EXEMPT. PATHS names the new command modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: export and print face cases in the import area
- file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box
written and read back (the meshes converted to a solid): V 6000,
A 2200, 6 faces, box (5,-10,0)-(35,10,10).
- file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints,
and the base's mesh, written in metres, reads back as the
1 x 0.5 x 0.2 box (V 0.1, A 1.6).
- body.print_face: a cylinder's flat end is accepted, its side refused.
PATHS adds the URDF writer and the print face modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #11259
* fix: preserve transferred profile frames when capturing positions
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: brett19 <brett19@gmail.com>
Co-authored-by: jyviko <jyviko@gmail.com>
* Measure: the area of a curved face on the exact surface, not the display mesh (#9086)
* Measure: a non-straight border edge leaves the band to the mesh; fix the Vec3 imports (#9086)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Inspect menu: Component Colors is a normal on/off item
The Component Colors entry in Inspect > Check was labelled "Enable Component Colors" and
swapped to "Disable Component Colors" with a different icon while on. It is now labelled
"Component Colors" in both states, keeps one icon, and shows a check mark when on, like Draft
Analysis and the other toggles beside it. The command id and parameters are unchanged.
The now-unused "disable" strings and the colored_components_off icon are removed. Other
languages' old "Enable ..." wording is dropped so they fall back to English until retranslated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the Component Colors label in the fully translated catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Checkable menu rows tell screen readers whether they are on
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Georgian: Component Colors loses its Enable/Disable wording
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3413
* feat(gpu): extend viewport AO to the virtual ground
* test(gpu): retain measured AO render attachments
* perf: initialize ground AO pipeline with concurrent jobs
* fix(gpu): size ground AO receiver for the current frame radius
* fix(viewport): retain orbit caches when ground AO visibility changes
* claim: #7520
* Hole: drill only the shown bodies when no target is picked (#7520)
A Hole that names no bodies drilled every body in its path, hidden ones
too, and its dialog preview replaced the hidden bodies with drilled ones.
Like a cut (#3961), it now takes the shown bodies of the active component
as its participants while some are hidden, stored so showing the others
later changes nothing. With nothing hidden, or everything, it still drills
every body.
Its face points are named on the bodies it drills first, so a hidden
body's face in the same plane no longer takes the picked face's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Hole: drill the picked body though it is hidden (#7520)
Review on #7562: with the picked face's body hidden (picked through Select
Other, or hidden while the dialog is open), the shown-bodies default left it
out, so the hole drilled only shown bodies further along, or nothing, without
a message. The body whose face holds the hole's position now joins the shown
ones, unless a shown body has a face there too (a face shared by a shown and
a hidden body is the shown one's, as a pick in the view takes it).
The test also covers editing a hole made with nothing hidden while a body it
drills is hidden: timeline.redefine stores participants only when the edit
passes them, so the hole keeps its empty scope and the hidden body its bore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
* Hole: test that a hole made with a body hidden replays the same (#7520)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Hole: follow the face-name lookup now returning a Result (#7520)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Hole: tests follow main's Vec3 and world_state (#7520)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Hole: format (#7520)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Hole: with every body hidden, drill them all as before (#7520)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7191
* Report a bug: limit answers by characters and show the room left (#7191)
The answers were cut to 2,000 bytes, silently: 666 characters of
Chinese or Japanese. They now keep 2,000 characters, as the text field's
own limit counts them, in the form, in the report and in a crash draft.
Under 200 characters left, an answer says how many there are. The
report's budget grows so three full answers in any script still fit
beside the technical details.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: leave the crash draft's description as it was
It is the app's own English text, well under the limit in bytes as in
characters; leaving the line alone keeps it apart from #7189's change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9557
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation: a middle or right drag keeps the mode it started with (#9557)
The mode of a middle or right drag was worked out again from the keys
held on every frame, so letting go of Shift partway through a Fusion
Shift+middle orbit turned the rest of the drag into a pan. It is now taken
when the drag starts and kept until its button is released, as a left
drag with the mapping's keys already was. Preferences > Navigation > "A
drag keeps the navigation it started with" (on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* test: the file chooser says when it is not the desktop's own (#10159)
rfd falls back to zenity in silence when the XDG portal is not there, and the
user gets a foreign window with no explanation. The host must be able to say so.
RED: the test fails with 'without a D-Bus session bus the file chooser is not the
desktop's own: the user has to be told'.
* fix: say when the file chooser is not the desktop's own (#10159)
rfd opens the file chooser through the XDG desktop portal; without the portal it
falls back to zenity, a window that does not belong to the app, and the app never
says so. The user gets a foreign window and no explanation.
The host now asks the session bus, on a thread of its own, whether the portal is
there, and keeps the answer. When a file is opened and the chooser is not the
desktop's own, the reason goes to the session log (Help > Messages), which is
where a user looks for it.
* fix: the file chooser messages read as notices, not assertions (#10159)
The maintainer asked for two things on the pull request: the strings of the
pending catalogue read like a test assertion ("the user has to be told...")
rather than a notice a person would see, and the doc comment above
desktop_chooser_fallback was there twice.
The three reasons are now plain messages, in every locale of the file: they
say what the chooser is and why, and stop there. The doc comment of the
function is now the only one, and it says what it did.
Only the version moves: SolidCraft builds against 0.6.7 unchanged. 0.6.7 applies App::Part
and link placements once, writes a sphere's seam ring as a valid loop, and indexes the
lookups that made large assemblies slow to decode. Two real FreeCAD documents that 0.6.3
refused as invalid open with it.
Claude-Session: https://claude.ai/code/session_01MvsHJx9gzG4447TABcpZFo
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10977
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter Sweep: input and output schemas (#10977)
inspect.parameter_sweep gets a typed contract and reply types in
schema/parameter_sweep.rs and leaves unconverted.txt. Each key reads as
the handler reads it, with its message; the reply is built from
ParameterSweep and its item types, with the same JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter Sweep schema: a missing parameter reaches the handler's message
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* parameter_sweep schema: do not publish a null default on the required parameter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Where one body stands on another (a post on a plate), the post's bottom,
seen through the cut, and the plate's top are the same plane. In the CPU
rasterizer (headless pictures without a GPU) the plate's top won that
depth tie and showed through the post's cut. The cut now wins a tie by a
few f32 steps (DEPTH_EPS).
The viewport already draws this right since #6363 and #6728; a GPU
regression test now covers it, both creation orders, orthographic and
perspective, with both depth formats.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* UI kit: one shared needs-attention mark, used by the agent chat's badge
The agent chat's "waiting" badge becomes `ui_kit::attention_mark` (a count, or
a plain dot) in `ui_kit/attention.rs`, so other things that wait for the user
(linked designs that changed, #5354) share one mark. The count is drawn
exactly as before. No change in behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* UI kit: sort the attention re-export
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ui_kit attention mark: take the corner inset from Tokens::space_3
The inset came from the agent chat panel as plain numbers, which font_sizes_and_dense_form_metrics_come_from_tokens refuses outside theme::Tokens (review on #5424). space_3 is 3.0, so nothing moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Carel Theron <careltheron@Carels-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
The live product preview's signature included the session revision, which
every command moves: a selection click extracted every body and built every
product vertex again (118 ms on a 200-body assembly) before the key comparison
skipped the upload. The signature is now the document and world state (held,
so their addresses are not reused) and every input of body visibility,
including hidden folders and the active sketch.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Past a failed step a scripted drag solves the next steps at once and takes
those that fail in a row as tried; the first that solved was then solved
again by the walk. It now becomes the sketch from its solved copy, so no
step is solved twice. A batch holds one step per core (at most 8), and on
one core or in the browser build, where a batch would run its steps one
after another, the walk solves the steps itself. The walk takes the same
steps with the same outcomes, so results and counted solves don't change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9007
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Circular pattern: cut copies of a hole that lie apart in one go, and check missed copies cheaply (#9007)
The check for copies that remove no material intersected every copy with
the whole body; a point test along the hole's axis (and through the middle
of the copy's overlap with the body) now proves most copies take material
and only the rest are intersected. Copies the kernel's coarse box test
takes for meeting are measured on finer meshes and, when clearly apart,
joined with join_apart and cut once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format (#9007)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Look for a copy's material through the middle of each of its faces (#9007)
A tool of two pieces (two circles cut at once) turned by 45 degrees has the
middle of its box between the pieces; the lines along the axes through it
miss both, and the copy was intersected. The lines through the middle of
each face's box run along each cylinder's axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Circular pattern: cut copies that notch the same round face one by one (#9007)
Copies whose boxes only finer meshes show apart were cut in one go. When
several of them notch the same curved face of the target (grooves along a
bore), the result kept extra lines on that face: a revolved ring with 37
grooves came out in 184 faces instead of the 151 a one-by-one cut leaves,
at the same volume. Such copies are now cut in turn; copies that only
share flat faces (through holes in a tube wall) are still cut at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Circular pattern: tell copies apart and find copies that cut nothing on exact shapes (#9007)
The checks this pull request added decided on meshes, which `cargo xtask
mesh-decisions` now refuses. They decide on the exact shapes instead:
- Two tools whose boxes meet are apart when their union comes out in two
pieces that share no face, edge or vertex (crossing, nested and touching
tools do not).
- A copy takes material when a point along its axis, the axes of its round
faces or the middle of the box it shares with a target is inside both, by
exact point classification; only copies that test cannot place are
intersected.
- Copies that notch the same round face are no longer cut one by one: cut
in one go they now leave the same faces as one by one (a revolved bore
with 37 grooves: 80 faces either way, as on main).
The test of copies that come close now uses 8.5 mm, where they overlap; at
9 mm they are 0.012 mm apart and are cut in one go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8823
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal: returns on a notched tray close at the corner away from the notch (#8823)
Closing two returns at a corner was refused when either return already lay
over another flange in the flat pattern, even far from that corner. On a tray
with a notch, the walls on either side of the notch's inner corner both unfold
into the notch, so the return on one of them lies over the other there; the
return's opposite convex corner was then left open ("closed, the flanges would
overlap in the flat pattern") and the two returns ran through each other.
A closure is now refused only when it makes the two returns overlap or adds to
what either already shares with another flange in the flat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* English: command labels in title case, other labels in sentence case (#9085)
The rest of #9085 after #9194 (the plural and the spelling) and #9907
(the Preferences page names). Command labels are in title case (422 of
430 were already); the seven in sentence case follow, and Fix/UnFix
reads Fix/Unfix. The UI text skill states the rule. The user docs name
the Preferences footer's button by its current label, Restore page
defaults (#10295).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar menu test: the echo names the command by its own label
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* UI text skill: state the case rule in one short sentence, under the 3600 limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Localization doc: the case rule in full, with examples
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Localization doc: the example button is Restore page defaults now
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: make engine errors translatable
Engine errors (`EngineError::BadParams` and the offset/path errors the kernel
returns) were shown in English regardless of the active locale.
- Add `tr_engine_error`, which maps the known messages to `sketch.error.*`
keys and returns anything unknown unchanged.
- Normalise the `invalid parameters for `<command>`: ` prefix before matching,
and interpolate the offset id into the translated message.
- Route `friendly_error` through `tr_engine_error`.
- Avoid redundant status writes in `run_points`/`run_entities`.
- Ship the es-ES pending strings for the sketch tool hints.
* Spanish (es-ES): catch up with en.json
Translate the 734 messages `es.json` was missing and fix `ui.project`
("Proyecto" → "Proyectar", the action behind the sketch project tool).
The catalogue now matches `en.json` key for key (5,591 entries), keeps every
placeholder intact and stays alphabetically sorted. That includes the 61
messages added upstream since the last catch-up (92a9a5e0).
Terminology: "Turntable" → «Plato giratorio», "hover" → «pasar el puntero»,
"card" → «tarjeta».
* i18n: attribute the sketch hints and keep the offset error neutral
The pending sketch hints file adds an asset, so it gets its own row under
attribution/pending rather than editing ATTRIBUTION.md.
The engine reuses the offset-ends error for trim, extend and break, so the
message no longer tells the user to trim: it asks them to edit the source
curves instead.
* i18n: translate shortcut-started tool hints and fix the break message
Shortcuts are handled in logic(), before ui() installs the language scope, so a
tool started by its key stored the English hint even with another language
selected. Install the scope for the whole frame.
The engine has nothing to break, so say so: "nothing to break here".
* i18n: scope a tool start so its hint uses the app language
A direct start can run outside the frame scope (and a shortcut runs in logic),
so the hint was built with the thread default. Open the scope where the tool
starts.
* Spanish (es-ES): translate the 30 new messages
The blur preferences, the dimension step settings and the fillet turn modes
arrived upstream after the last catch-up.
* i18n: scope command errors and use US spelling in the hints
The native menu runs Undo and Redo before the frame scope exists, so an error
from them was translated in the thread default language.
The pending hints mixed British spellings into the English source; the English
catalog is US-spelled, so the fallbacks say center and en-GB keeps centre.
* claim: #10854
* Agent chat: tell the agent the design changed by hand since its last reply (#10854)
The chat remembers the design as the agent last saw it, at the end of a
turn it answered or worked in. When the next message goes and the design
is no longer that one, a note goes before the message for the agent (not
into the conversation, like the note after an interruption): the user
changed the design by hand, which parameters changed from what to what,
which features are new, edited or removed, where the History marker went,
and to read the design again before reusing positions, picks or sizes.
A new chat and a stopped backend forget it, so a session that has seen
nothing gets no note. Each list names at most 12 items and counts the
rest; names and expressions are cut at 60 characters.
* Agent chat docs: the design-changed note asks the agent to read the design again (#10854)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Loft: profiles picked one after another in one sketch are one section (#11720)
The Loft dialog made every picked profile its own section, so two picks in
one sketch (both halves of a split outline, say) became two sections in one
plane and the loft was refused. Consecutive picks in one sketch now form one
section {sketch, profiles: [...]}; a later return to that sketch is still a
section of its own, so the there-and-back loft of #8221 is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Loft: an unchanged edit keeps a section of all profiles "all" (#11720)
An edit loads a section of "all" as each profile of its sketch; now that
those picks make one section, OK saved them as indices. Indices fill a
letter's counters that "all" keeps as holes, so a later rebuild could
change the loft. Like Extrude, Revolve and Emboss, a section that was
"all" stays "all" while the picks are unchanged and cover every profile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
same_nurbs compared the weights of a face's NURBS form and the rebuilt
analytic surface's NURBS within an absolute 1e-12. A weight is found from
the control points, so its rounding grows with the coordinates: 3.8e-12 at
coordinates of about 320 on a cone. The face was refused with "a NURBS form
that is not its analytic surface". Weights now compare within
1e-12 * max(1, |coordinates|), as same_nurbs_curve already does for points.
* claim: #11434
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Preferences: the theme arrows move by the themes that fit in view
The previous and next arrows beside the theme cards in Preferences >
Appearance moved the row by one card per click, although their hover
text says "Previous themes" and "Next themes". With 26 themes and about
six cards in view, reaching the last theme took some twenty clicks.
The shared carousel now moves by the number of cards that fit at the
current width, so one click shows the next screenful. The last page
ends on the last card, the first page starts on the first, and the
arrow at an end stays dimmed and inert. The step follows the window
width, and the row still opens on the chosen theme.
Fixes#11434
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #11895
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration table: input and output schemas for Configure, Configuration Column, Row and Rule (#11895)
describe_command now gives the exact parameters and reply of the four
commands that change a design's configuration table, and the warn and
strict parameter checks use them. The handlers read their parameters
from the raw JSON, so the new contracts in schema/config.rs read each
key as its handler does, with its message: lists of names as
params::string_list (whose json_brief and MAX_STRING_LIST become
pub(crate)), exactly one column target, faces picked or a face column's
key, a row's cells, and rules (whose schema describes them; the handler
keeps its own check). What only the design can answer stays the
handler's. All four reply with ConfigTableReply, as config.table does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9625
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Name the value at fault when a hole, sheet rule, joint or extrude is refused (#9625)
Several refusals were right but named a check the input had passed, so
the user changed the wrong field:
- solid.hole: an unknown `fit` was reported as an unknown bolt size; it
now says the fit must be close, normal or loose. A countersink angle
out of range was reported as a countersink too narrow; the angle and
the width are now checked apart. A `diameter` number out of range was
reported as missing; it now gives the range, as other parameters do.
- Sheet rules: a thickness of 10000 mm or more said "must be positive";
it now gives both limits. The K-factor and the bend radius are named
on their own, and the message no longer implies a radius of 0 is
refused.
- joint.drive: a number out of range said "numbers or expressions"; it
now gives the range.
- Extrude: a distance past the kernel's limit said `end = 1000000000`;
it now says the extrusion is too long and gives the limit.
Fixes#9625
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Refuse a too-long extrusion before the kernel and match the countersink floor (#9625)
The kernel is paused, and its `finite()` check also guards a revolve's
angle and a cylinder's and a torus's sizes, so its message must not say
"extrusion". crates/kernel is back as it was; the doc evaluator now
refuses an extrude (plain, tapered, or redefined from the Edit Extrude
dialog) whose end lies 10000000 mm or more from the sketch plane,
mirroring the kernel's limit, and says so. A cylinder of radius 2e7
keeps the kernel's own message.
The countersink check refused 0.1° while the message said "more than
0°". The floor stays (the cone grows as 1 / tan of the half angle) and
the message now names it: more than 0.115°.
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Allow optional hidden-edge picking in Shaded with hidden edges
Keep visible-only picking as the default. Cover the preference, hover cache,
section and body visibility, and Fillet inputs in the existing UI tests.
Use platform-absolute fixture paths in the Windows CI argument-parser test.
* Respect section caps and visible-edge ties in hidden-edge picking
* Keep section caps as occluders behind nearer kept faces
* claim: #11882
* Agent chat: a prompt's bubble is as tall as its message (#11882)
The prompt's Copy message row (#10741) was laid out right to left and centred
across its height. egui gives such a row all the height left in the
conversation's view, so a prompt near the top of a conversation stretched
down over the empty view, with Copy message floating in the middle. The row
is top-aligned now.
* Agent chat: keep the test's harness bound (#11882)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Arabic: rim term and the shell-first step in the Lip help
* Arabic: Up/Down keys in the dimension step preferences, frame-rate note matches the English
Added as assets/locales/pending/finnish-catch-up-2026-11.json so it
folds after merge: help texts, the redesigned Preferences (sketch,
navigation, dimension values, panel blur), fillet corner, setback and
turn options, threads, import report, browser and viewport messages.
cargo xtask i18n lists nothing missing for fi.
Co-authored-by: Janiz-zzz <267742026+Janiz-zzz@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The handler's strict parameter type moves to schema/render_shots.rs as
ShotParams, with descriptions and JsonSchema, and becomes the contract of all
three commands; the handler reads the same type. It builds ShotChange instead
of a json! literal, and takes its operation as a ShotOperation enum.
Co-authored-by: Claude <noreply@anthropic.com>
* Snap points: a flat face offers its corners, edge middles and every hole's centre (#11476)
A flat face now offers its whole outline as snap points, read from the
exact faces and edges: every corner, the middle of every straight edge
and the centre of every round edge, holes included, as well as the centre
of its area. Corners on a closed circle's seam, or where the kernel split
one circle into pieces, are left out.
snap_points_from gives each point with where it came from (SnapSource):
the face it was picked on, the face's outward normal and a point inside
its edge, so a tool can keep the point by name (joint.create's edge,
corner and on) and turn a frame to the face. SnapPoint itself does not
change, so code that builds one keeps compiling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Snap points: a round face's end centres say which way their end faces (#11476)
The centres at a cylinder's or cone's two ends now carry a normal in their
SnapSource: the axis pointing out of that end, which is the normal of the
face a hole opens onto or of a pin's end. A joint origin taken from one can
then lie on that face, as the centres a flat face offers already do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Snap points: a hole centred on its face keeps its own point and rim (#11476)
Snap points were one point when they lay at one place, whatever their kind,
so a hole centred on its face was lost behind the face's centre, and with it
the rim its point keeps. Now only points of one kind are merged: the face's
centre and the hole's centre both stay, and only the hole's has its rim.
SnapSource::normal's doc now says it is also the axis out of a cylinder's or
cone's end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Snap points: a washer's two rims keep a centre each (#11476)
Centres at one place are one point only when they are on one circle: the
inner and outer rims of a washer face now keep a centre each, with its own
rim, while the pieces the kernel split one circle into are still one point.
SnapSource::normal's doc now says that at a round face's end it is the
axis out of that end of the face, which at a blind hole's bottom points
into the material below, not out of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Snap points: rims are told apart by their radii's size, not their place (#11476)
Two centres at one place were one circle when their rims' radii differed by
less than the place's tolerance, which grows with the distance from the
origin: 60 m out, rims of 4 and 4.05 counted as one and one lost its point.
The radii are now compared with a tolerance from the radii themselves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Snap points: nearby points stay apart far from the origin (#11476)
Points of one kind at one place were merged within a tolerance of 1e-6 of
their distance from the origin, 0.06 mm at 60 m, so two small holes there
whose centres are 0.05 apart lost one centre. Places now use 1e-9 of that
distance (0.06 µm at 60 m): well above the rounding of coordinates and of a
circle fitted to an imported edge, so a point found twice is still one, and
far below any feature. The radii keep their own tolerance.
The merge is its own function, so its test can give it points directly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Alfonso Tamés <mufufu@Mufufu-MacBook-Pro.local>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Book: a numbered window screenshot and a navigation clip, from a capture script
The window tour now opens with a screenshot of the real window, its parts numbered in the
order the page describes them, and a short looping clip of orbit, pan, zoom and Home.
examples/demo/doc_shots.py makes both, and any later figure: each shot is a function that
starts a fresh app (its own settings) under Xvfb, drives it over the control channel with
the demo's Demo driver, and writes a still (numbered callouts, palette-optimised PNG) or an
H.264 clip (the drawn pointer of overlay.py, short button labels, idle cut by trim_idle.py)
into docs/book/src/media/. CONTRIBUTING.md says how to redo a figure when the UI changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc_shots: clips keep a moment on each result; the window tour again on 0.29.0
trim_idle.py takes --hold S, the seconds of each idle stretch to keep (default 0.1, as before,
so the README demo is unchanged). The guide's clips keep 0.8 s, so a reader can see what each
step did before the next begins. The window screenshot and the navigation clip are made again
with it, on SolidCraft 0.29.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9943: keep orbit gizmo drag tracking past the window edge
* Warp the orbit gizmo drag back to the window centre at the edge (#9943)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A design that crashes or hangs the app while it is being reopened was
reopened blindly every launch, bricking the app each time. A launch that
reopens designs now marks them in the recovery folder; the marker is
cleared as each design finishes opening. A launch that finds the marker
left behind skips those designs once and says which one the last session
stopped on, so the app starts usable and the loop breaks.
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #10540
* Ribbon: only switch the tab when a command actually starts (#10540)
select_command_tab ran before the command's own checks, so a command that
only reports a missing parameter or nothing to work on still moved the
ribbon. The ribbon now moves when the command starts and a refused command
puts the tab back, as a disabled command already never leaves it. View
display toggles and choices menus keep the ribbon's tab however they are
started, matching F6, the navigation bar and the view cube.
Written by Qwen.
* rustfmt (#10540)
Written by Qwen.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #10240
* Lost GPU: a loss met by a queue write restarts the app instead of crashing (#10240)
The per-frame probe (#6528) finds a device the driver reset before the
frame's uploads, but the driver resets a device at any moment: a reset
that lands after the probe is still met first by a queue write or the
present, and wgpu-core unwraps the driver's Lost there
(PendingWrites::activate) instead of losing the device. That panic
ended the app and wrote a crash report.
- egui-wgpu: the painter runs each frame under DeviceLost::survive. A
panic the frame meets is taken for the loss once the probe then finds
the device lost (the probe's path loses the device and runs its lost
callback); the painter draws nothing more and the app restarts as for
any lost device, keeping unsaved changes for recovery. Any other panic
carries on unwinding.
- Crash reports: a panic inside wgpu-core that unwraps Lost is the
device loss, not a bug, and is not reported. A command that meets it
fails; the next frame's probe restarts the app.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* View navigator: a custom body as the navigator, and a right-click menu to switch types
A right-click anywhere on the view navigator opens a menu with its three types: Axes, Cube and
Custom. Custom opens the Custom View Navigator panel (a feature panel with OK and Cancel): pick a
body in the view, its texture (Themed: the cube's colours; Modeled: the body's own appearance and
the view's edge colour), and whether the cube's rotation arrows and Home button go around it. The
navigator previews the panel's choices while it is open; Cancel leaves it as it was.
The custom navigator draws the body at the cube's size through a small depth-buffered raster, so
hidden faces stay hidden; hovering a face highlights it, a click looks straight at it (and frames
the model with navigator_fit on), a drag orbits. Until a body is chosen it draws the cube.
The body is kept as a packed snapshot (16-bit, base64) with the preferences and in settings
profiles, so it stays across runs and designs and travels with an exported profile. Bodies over
10,000 triangles, and long or flat ones (thinnest width under a fifth of the widest), are refused.
New command view.navigator (style, body, texture, arrows, home) does the same without opening
anything; new preferences navigator_texture, navigator_arrows and navigator_home, and a Custom
choice for navigator_style. Defaults are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: a hovered face in Modeled takes the view's selection colours
In the Modeled texture the face under the pointer is filled and outlined the way the view selects
a face of the model (sel_face, sel_edge), not in the cube's hover blue and accent, which Themed
keeps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: a hovered face in Modeled lights up as the view's mouse-over does
The face under the pointer keeps its own colour, a little lighter (hover_face_lift) and still
shaded, with its edges in the view's mouse-over edge colour (hover_edge), as the 3D view shows a
face under the pointer; not the selection colours. Themed keeps the cube's hover blue and accent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: rotation arrows and Home on by default
navigator_arrows and navigator_home start on, so a new custom navigator has the cube's arrows and
Home button around it; the Custom View Navigator panel turns either off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: the strings in every complete language, and test fixes
- The new messages in Arabic, Hebrew and Vietnamese (complete catalogs, like Japanese and Chinese).
- The navigator's raster goes through one colour helper, listed with its reason among the files
allowed colour literals (the design's appearance shaded into pixels).
- nav_settings joins the requested-icon manifest (the view.navigator command's icon).
- A visible edge piece is kept only when the stretch seen with it, across the edge's segments, is
at least two samples long: a hidden edge no longer shows a sliver at a silhouette corner.
- The navigator layout test treats Custom without a body as the cube it draws; the panel and
size tests no longer assume an empty undo list, the style before opening, or a coarse sphere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: profiles carry its texture, arrows and Home
Settings profiles keep a fixed set of preference keys (#9907), which the custom navigator's newer
settings are not part of. They travel in the profile's own `view_navigator` entry, next to its
body (`view_gizmo`): captured, checked (a value this version can't read is left out) and applied,
leaving the fixed key set unchanged. The cube's arrow inversion (#10286) applies to the custom
navigator's arrows too, through the shared arrows().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: follow main's Vec3 move and fallible world_state
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: list view.navigator in the rig's EXEMPT, refuse a stored body that can't save again, right-click without a widget over the navigator
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: keep the body unless picked again, save only a profile that reads back, no navigator menu through a popup
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: refuse a stored body with a triangle past its points
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: a stored body meets the triangle and aspect limits a picked one does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Custom view navigator: a body at the 5:1 limit stays inside it once packed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* i18n(uk): translate the 80 messages main gained after batch 11
* i18n(uk): translate the messages main gained after 2 November
Add Ukrainian for the 158 English messages upstream added since the last
sync, and update 10 existing translations whose English text changed.
The new messages go in assets/locales/pending/uk-sync-2-nov.json, as the
locale files are not edited for new messages. The changed English text is
updated in assets/locales/uk.json, because a pending file cannot change an
existing message.
* i18n(uk): translate the messages main gained after the 3 November sync
Add Ukrainian for the 174 English messages upstream added since the last
sync, and update 56 existing translations whose English text changed.
The new messages go in assets/locales/pending/uk-sync-2-nov.json, as the
locale files are not edited for new messages. The changed English text is
updated in assets/locales/uk.json, because a pending file cannot change an
existing message.
* i18n(uk): apply CodeRabbit review fixes
Use the catalog's established wording: 'вибрати' in the keyboard hint,
name the linked component in the double-click help, and use the command
labels 'Упор', 'Бобишка' and 'Клацкове з'єднання' in the placement group.
* i18n(uk): use "Защіпкове з'єднання" for Snap Fit
The catalog called the plastic snap-fit joint "Клацкове з'єднання", a
calque of "snap". Use the standard "Защіпкове з'єднання" and
"защіпковий гачок" in the command label, help, sample description and
the design tools placement group. The drag hint already said "защіпку".
* i18n(uk): replace calques and outdated terms
Use "збіг" for coincident, "виступ" for lip, "ступиця" for hub, "шаблон" for preset, and "наддискретизація" for supersampling. Render and panel host texts now say "рендерер" or "середовище"/"вікно" instead of "хост".
* Sketch: an ellipse comes with its axes, and D measures its half-axes
An ellipse could only be sized by its minor radius, drawn like a circle's
radius, and there was no way to give its full axes. sketch.ellipse now also
adds the major and minor axes as construction lines through the centre.
The major axis runs from the major end to the point opposite it; the minor
one is perpendicular to it, ends on the ellipse, and both are bisected by
the centre. That adds six coordinates and six equations, so the ellipse
keeps its five degrees of freedom, and it needs no new constraint kind and
no format change.
With the axes in place every ellipse size is an ordinary dimension. D on an
axis line gives its length, the whole axis. D on the outline gives a half-
axis, the distance from the centre to an axis end, chosen the way a line
chooses horizontal or vertical but in the ellipse's own frame: text pulled
across the major axis measures along it (the major half-axis), text pulled
out past an end of it measures across it (the minor one). The end on the
text's side is used. Near the boundary between the two, a dimension being
placed keeps the half-axis it had (sketch.dimension's previous_axis, which
the Dimension tool sends), so the preview does not flip. A half-axis and
its whole axis determine each other, so the second becomes a driven
dimension through the existing redundancy path.
Deleting the ellipse leaves its axes, as deleting a Center Rectangle's
edges leaves its construction diagonals. Ellipses without axes, from
existing designs, keep the minor radius as before, and type radius still
gives it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Guide: an ellipse's axes and half-axis dimensions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test that an ellipse's half-axis preview keeps its axis near the boundary
The Dimension tool sends the half-axis its last preview chose, so near the
boundary between the major and the minor half-axis the preview keeps it.
This covers that path from the tool, from both sides of the boundary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's axes select and drag with it, as a rectangle's diagonals do
A double-click on a Center Rectangle's edge or diagonal selects its edges
and both diagonals, and dragging a diagonal moves the rectangle without
changing it, because its lines share corner points. An ellipse's axes are
held by constraints instead, so a double-click selected only the ellipse
(and Delete then left the axes behind), and dragging the major axis moved
the ellipse but stretched its minor half-axis.
Sketch::ellipse_axes now finds an ellipse's construction axes (the
detection sketch.dimension already used, moved into the sketch crate).
Sketch::chain treats an ellipse and its two axes as joined, so a
double-click on any of them selects all three. Dragging either axis moves
the ellipse and both axes as one, keeping both half-axes. Dragging the
outline still sets the minor half-axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a corner test reads its line's id instead of assuming l1
sketch.ellipse now adds two axis lines, which take the first line ids, so
the extend test reads the id of the line it draws from the reply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's axes cut a trim, as a Center Rectangle's diagonals do
Trim, extend and break take every other curve as a cutter, construction
lines included, so an ellipse's construction axes stop them as a Center
Rectangle's diagonals do. A test now states it for both shapes, and the
guide says it. The freeform cutter test keeps the axes it used to delete
and asserts the piece a trim removes: from where the major axis crosses
the circle to where the ellipse does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test dragging an ellipse's outline with its axes present
Dragging the outline sets the minor half-axis, and the minor axis line,
held on the ellipse at one end, follows it; the centre and the major
half-axis stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: other dimension types on an ellipse with axes keep the minor radius
Only auto, major and minor give a half-axis on an ellipse drawn with its
axes. Any other type (radius, diameter, horizontal and the rest) gives
what it gives on an ellipse without axes, as the parameter doc says,
instead of quietly becoming a half-axis chosen by the text. The arm for
a missing text_at is dropped: with no text the rule already picks the
minor half-axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test an ellipse's half-axis dead zone from the major side too
The tests only showed a previous minor half-axis being kept near the
boundary; the point they used on the major side is major by geometry
alone. A point inside the band where geometry says minor now shows a
previous major half-axis kept, in the engine and in the Dimension
tool's preview.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a placed ellipse half-axis is the one its preview showed
On an ellipse already sized, a half-axis is added as a driven dimension
on the click, and that command left out the half-axis the preview kept
near the boundary, so the click could place the other one. It now
passes it as the preview does.
The remembered half-axis also comes only from a draft whose text was
placed (one without text is the minor half-axis by default and biased
the first placement), is kept per sketch as well as per picks, and is
forgotten once a dimension is placed or the picks are cleared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: say how an ellipse's axes are recognised and what that costs
The axes are read from the constraints, with no mark in the design, so
the doc comment says which lines count, that deleting the midpoint or
point-on-curve constraint leaves an ellipse without axes, and that each
lookup scans curves times constraints.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse with one axis deleted still picks its half-axis by the text
With one construction axis deleted, D on the ellipse fell back to the minor radius wherever the
text was pulled, because the half-axis choice needed both axes. It now reads what is left of
them and chooses as before: the major half-axis goes to the major end (also from the far side,
when the point opposite is gone with its line), the minor one to its axis end, or as the minor
radius when the minor axis is the one deleted. An ellipse with neither axis keeps the minor
radius.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the one-axis half-axis test checks what is measured to
The test for an ellipse with one axis deleted checked only the reply's axis and value, which
both ends of an axis give alike. It now checks the dimension's kind and end: the axis end on
the text's side, the major end from either side once the point opposite is gone, a radius once
the minor axis is. With the major axis deleted and no text the reply names the minor axis and
measures to its end, where it used to be a radius with no axis named.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's minor radius is drawn as its half-axis, without R
A radius on an ellipse is the minor half-axis, and it was drawn as a circle's radius: one
leader from the centre towards the text, marked R, which measures nothing a reader can see.
It is now drawn as the distance from the centre to the minor axis end on the text's side,
the way the half-axis is drawn while the ellipse has its axes, and labelled with the length
alone. This is what D gives once the minor axis line is deleted, and on an ellipse with no
axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's half-axis keeps a radius's stored text
The half-axis frame read the stored text from the middle of the half-axis, so a radius placed
on an ellipse in an existing design would show its text somewhere else. The text is stored from
the centre again, as a radius's always was, and the side drawn to follows it. An unplaced one
sits where a linear dimension to the minor axis end puts its text, and stacked texts step out
from the centre as a radius's do. A view test reads the painted label, so the drawing cannot
go back to R unnoticed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse moved, turned or scaled takes its axes along
Move, Sketch Transform and Scale moved only the curves picked, so an ellipse moved without its
axes left them where they were: its centre no longer halved them, the minor end left the
ellipse, and the sketch stayed unsolved. A Center Rectangle's diagonals share its corners and
always go along; an ellipse's axes share only the major end. The axes now go with the ellipse,
as they do when it is dragged. Copy is unchanged: it copies no constraints, for a rectangle
either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a preference draws ellipses without their axes, as before
Drawing an ellipse with its construction axes changes what the Ellipse tool makes out of the
box, so the old ellipse stays one setting away: Preferences › Sketch › Draw ellipses with their
axes, on by default. Off, the tool draws the ellipse alone. sketch.ellipse takes axes: false
for the same, and keeps drawing the axes when it is not given.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: sketch.ellipse refuses an axes value that is not true or false
A string such as "false" was read as not given, so the axes were drawn; it is now refused as
the text commands refuse a non-boolean bold or italic. The move test also covers an ellipse
whose minor axis was deleted: the major axis left goes along.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: D picks a half-axis on an ellipse without axes too
An ellipse with no axis lines (both deleted, a mirrored copy, one from an older design) gave the
minor radius wherever the text was pulled, so its major half-axis could not be dimensioned on
it. The half-axis is now chosen by where the text is on every ellipse: the major one to the
ellipse's own major end, the minor one as its minor radius. With no text it is the minor
radius, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: with one half-axis dimensioned, D on the ellipse gives the other
D on an ellipse chose the half-axis by where the text was pulled even when that half-axis was
already held by a dimension, so the second D usually guessed the one already there and was
refused as over-constrained. With a driving dimension already on one half-axis (to an axis
end, the minor radius, or the whole axis along its line or between its ends), D with no type
now gives the other, in either order and with or without the axis lines. With both held it
chooses as before; an explicit major or minor is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the held half-axis rule is documented and its cases tested
The Dimension command's parameters and the guide now say that with one half-axis held, D on
the ellipse gives the other. Tests cover the whole axis held as a distance between its ends
and as its line's length with the other axis deleted, and check that a mirrored ellipse has
no axes. The placement test undoes its first dimension, so its second half still tests where
the text is rather than the held half-axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Transform previews an ellipse with its axes
OK in Sketch Transform moves, turns and scales an ellipse's axes with it, but the window drew
where OK would leave only the picked curves, so the axes stayed put in the preview until OK. An
ellipse picked alone is now drawn with the axis lines it has.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the typed-radius ellipse test counts the ellipse's axes
Main's #10282 test drew an ellipse with typed radii and expected one curve; with the
ellipse_axes preference on by default the tool also draws the two axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's remaining axis still drags and selects it
With one axis deleted, dragging the other axis did not hold the ellipse (with the minor axis
left, the drag squashed it), and a double-click on the ellipse or that axis selected only the
one curve. The drag and Sketch::chain now read whichever axes are left through
ellipse_axis_lines, as Transform and Move already do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: drop the unreachable third arm of the held half-axis check
A distance from the centre to the major end or the point opposite it is already matched by the first arm, so the third arm and its major_end closure never ran.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: D on an ellipse's axis line is the whole axis wherever the value is pulled
An axis line took the free line's rule, so on a turned ellipse a value pulled beside or above the box the axis spans gave its horizontal or vertical distance. An ellipse's axis is a construction axis, so auto now always gives its length, which the held half-axis check already counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's axis is never a side of a Fillet or Chamfer corner
A line drawn from an ellipse's major end shares that point with the major axis, so Fillet or Chamfer there took the two as a corner (two lines skip the construction filter) and rounded the line into the axis. The axes are left out of a corner, picked by its point or as a and b.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test the move reply, extend and the one-axis Transform preview for ellipse axes
The reply of sketch.move, sketch.transform and sketch.scale lists the axis lines, Extend stops at an axis, and Sketch Transform previews an ellipse with the one axis left after the other was deleted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: with Draw ellipses with their axes off, D on an ellipse is its minor radius as before
The preference brought back the old drawing only; D on an ellipse had changed with no way back. sketch.dimension takes half_axes (default true, refused when not true or false); false makes auto on an ellipse the minor radius wherever the text is. The Dimension tool and the context menu's Sketch Dimension pass it from the preference, and with it off a radius on an ellipse is drawn and labelled R as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: read an ellipse's axes in one pass over the constraints
ellipse_axis_lines scanned every constraint for every curve, so 500 ellipses with their axes (1500 curves, 2000 constraints) took 1.6 s to read and Move on all of them 2.0 s. It now collects the lines the centre bisects first: 3 ms and 0.36 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the dimension and corner parameters say how an ellipse's axis lines take part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: Draw ellipses with their axes says D gives the minor radius when off
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: ask only the ellipses centred on a line's midpoint whether it is their axis
is_ellipse_axis read every ellipse's axes to answer for one line. An axis is bisected by its ellipse's centre, so it now asks only the ellipses centred on a point that bisects the line. The answer is the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a horizontal or vertical dimension across a level major axis holds it for D on the ellipse
half_axes_held counted a distance, a length and a radius, but not a horizontal or vertical dimension across the major axis, which is its length when the axis lies that way. D on the outline could then take the held major half-axis and be refused as determined; it now gives the minor one. Across a slanted axis such a dimension is only a projection and does not count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dimension: a draft on an ellipse is drawn with the axes preference it was made with
The frame read the preference as it is now, while the dimension added is the draft's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a horizontal or vertical dimension across an upright minor axis holds it too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: drop the unused Sketch::ellipse_axes; ellipse_axis_lines says how the axes are read
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse's own axes do not cut it, so Trim takes a lone ellipse whole and stops at real crossings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Fillet and Chamfer offer no corner at an ellipse's axis end, as the engine takes none
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a deleted ellipse leaves its centre on its axes, as a Center Rectangle's centre stays
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: ellipse axis docs say what they do, and the corner picker tests a curve's ends before its axis role
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the trim-at-a-crossing test checks that part of the ellipse is left
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an ellipse axis moved, turned or scaled on its own takes its ellipse along, as a drag does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a selection dragged by an ellipse axis takes the ellipse along, as the axis alone does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the Sketch preferences page lists Draw ellipses with their axes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the ellipse axes help text says D gives the minor radius, drawn and labelled R as before, wherever the value is pulled
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #794
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Shell: pick a body from the Browser for a closed hollow (#794)
Faces/Body accepted only faces, so a Browser body click never filled the
Shell dialog. Accept bodies, build faces:[] with that body, restore empty-face
shells as a body pick, and keep the chip/highlights on the body itself.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Shell: refuse faces that sit on a different body than the Browser-picked one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Standard parts: input and output schemas (#11003)
parts.library, parts.insert, parts.fastener and parts.resize get typed
contracts and reply types in schema/parts.rs and leave unconverted.txt.
Each key reads as the handler reads it, with its message; the replies
are built from PartsLibrary, InsertedPart and ResizedPart, with the same
JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Standard parts schema: Vec3 comes from solidcore_record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Standard parts schema: hole picks must start with a list
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* parts.insert schema: the first hole pick must be a point, not any list
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11103
* Hole: Bridge option for counterbores (#11103)
A counterbore hole takes an optional `bridge` length: two 3D-printing
layers that thick below the counterbore's floor, a slot along X across
the counterbore and then a square, both 0.02 mm wider than the hole, so
a printer bridges the step instead of sagging into it. Empty (the
default) keeps a plain counterbore.
The clearance keeps the bore, cut straight through both layers as for a
plain counterbore, clear of their sides: at exactly the hole's width it
ran tangent along them and broke through. The command and the geometry
refuse a layer that is not a positive length, layers that don't fit in
the hole below the counterbore, and a bridge on any other hole type.
The Hole dialog shows a Bridge field below Drill Point for counterbores.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: translate the Bridge label for the complete catalogs (#11103)
Arabic, Hebrew, Japanese, Vietnamese and Chinese carry every English
message, so `cargo xtask i18n --check` needs the new label in each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: bridged counterbores refuse layers past a through hole's exit, too narrow a counterbore and a malformed bridge (#11103)
- Through all, the second bridge layer must end inside a body (exact point classification),
short of the exit face; the tool's reach is no measure of the material.
- A bridged counterbore must be at least 0.04 mm wider than the hole, so the slot's ends have
room on its wall (no square root of a negative number reaches the extrude).
- `solid.hole` refuses a `bridge` that is given but not a length expression (`true`, `[]`, `""`)
instead of making a plain counterbore; `null` still leaves it out.
- Loop2 and Seg2 now come from solidcore_record (main moved them).
- The "nothing saved" check looks for the `"bridge"` key: `format_pending` names
`bridged-counterbore` in every design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Unit defaults test: solid.hole has the bridge field too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11443
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render library: input and output schemas for List, Describe, Targets and Preview (#11443)
Describe, Targets and Preview read their strict parameter types from
schema/render_library.rs, which become their contracts. List keeps its two
readers (the physical profiles' takes availability: null, the other
catalogs' doesn't); its contract takes what either takes. The handlers build
LibraryPage, LibraryResource, LibraryTargets and LibraryPreview instead of
json! literals; a catalog resource is read into ResourceSummary through a
small Listed reader. The physical profiles' replies keep their JSON, which the
schemas describe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render library schema: the list says which availability each catalog takes
render.library.list has two readers: the physical profiles' takes
availability all, usable or null; the other catalogs' (and a call
without kind, which lists surfaces) take all, usable, specification or
blocked, but not null. The schema now says so with an anyOf on kind.
The type still takes what either reader takes: the readers check the
query and the page before availability, so refusing it in the type
would change which message a call with two mistakes gets in strict.
A new test checks that the schema takes ten calls exactly when the
handler does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11723
* Assembly: Move Occurrence says when the part's joints put it back (#11723)
A part that rigid joints hold to something grounded was moved, then put
back by the joint solve after the command, while occurrence.move still
replied with the moved transform. occurrence.move now solves the joints
before it replies. When they put the part back, the reply gives where the
part is, adds reverted: true and a warning that names the joint holding it
and what to change instead. A free chain of parts follows the move as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move Occurrence: the warning names the joint for a part in a repeated assembly too (#11723)
A part inside an assembly placed more than once has no path of its own, so
the reverted-move warning asked for one instead of naming the joint. It now
looks at the placement the caller named, or else the first one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move Occurrence: list the part's joints when no single joint holds it back (#11723)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: hidden occurrences draw no joint-origin triads
A named joint origin's triad (red/green/blue axes, white dot) was drawn for every
origin, so hidden inserted hardware still showed one at its placement. It now
follows the occurrence's visibility (and its parents') and the Joints folder of
the design and of the placement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: a copy's joint-origin triad follows that copy's visibility
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#10871 reworded Lip's refusal on a face that is not a shelled rim to
"Lip needs the rim of a shelled body: ...", but the plastic rig case
cov-lip-on-a-face-without-an-opening-refused still looked for "pick the
rim face of a shelled body". The case now matches the new message, so the
kernel rig's plastic shard passes again on main.
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds assets/branding/logo with the static mark (colour, one-colour
black and white), transparent 512/1024/2048 px PNGs, an outlined
wordmark and a horizontal lockup, all drawn from the app icon's
blue cutout layer. assets/branding/README.md covers use, colours,
clear space, minimum size and the name.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Desktop: closing a design stops its kernel work; same result on any kernel
A design's jobs now run under a stop token that closing or replacing the
design fires: an operation under it refuses to start, and one running ends
at solidcore's next check. The kernel it ran on is not used again. Calls
that answer from a body itself always finish, since a stopped call can leave
what it borrows half-changed, and what fills a body's shared cells is not
stopped.
Every kernel call starts clean (the same random rays, no stations from
earlier calls), so a design builds the same on any kernel of the pool, down
to its B-rep records. The pool is bounded: at most 8 kernels wait between
calls, and at 256 running calls a new call fails rather than grow or wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stop tokens: a copy never stops its design; a stopped job can't decide a refusal
A copy replacing its own design stopped the token it shares with the design
it came from, so that design's later work would be refused. Only the design
itself stops it now. Which face a refusal names no longer depends on whether
the job that found it had been stopped: the refusal is kept with the body,
and a stopped job's probes were all refused, which named the wrong face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:35:39 +00:00
1053 changed files with 107385 additions and 63594 deletions
SolidCraft is a clean-room, pure-Rust parametric 3D CAD app (sketch solver, feature timeline, B-rep kernel, an egui UI that agents drive). This file is a router: the hard rules, then the skill to read for your task. Humans: CONTRIBUTING.md.
## Start here
Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelled `help wanted`, `good first issue`, `needs-triage`; architecture in `docs/architecture.md`. Act when the code, docs and rules settle a question; ask only when it changes what users see. Local `plan/` notes are optional.
Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelled `help wanted`, `good first issue`, `needs-triage`; architecture in `docs/architecture.md`. Local `plan/` notes are optional.
## Hard rules (what enforces each)
- Independent: never copy another product's code, icons, text or templates; never drive or take data from commercial CAD. `skills/solidcraft-ground-rules/SKILL.md`.
- No GPL/LGPL/AGPL code, not even reading it (OpenCASCADE, FreeCAD, SolveSpace, CadQuery, LibreCAD, QCAD): `cargo xtask licences --check`.
- Every asset is original or openly licensed with a row in ATTRIBUTION.md; read `assets/AGENTS.md` before icon work: `cargo xtask assets`, `cargo xtask icons`.
- Never crash: no unwrap/expect/panic/unsafe in non-test code (unsafe allowlist in crash-safety), errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
- Never crash: no unwrap/expect/panic/unsafe in non-test code, errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
- Model decisions (what an operation does, which bodies it touches, which face or edge a point or name means, depths, nearness) use exact geometry; a mesh is for display, export, previews and mesh bodies (`xtask/mesh-decisions.txt` only shrinks): `cargo xtask mesh-decisions`.
- New kernel cases go to solidcore: `cargo xtask lists`.
- Everything is a command and programmatic calls never open dialogs: `skills/solidcraft-commands/SKILL.md`.
@@ -21,12 +21,14 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
- A design-format change is ONE new file in `crates/doc/src/format/pending/`: `scripts/test-format-pending.sh`.
- A command has input and output schemas (will become required; `schema/unconverted.txt` only shrinks): `skills/solidcraft-commands/SKILL.md`.
- New UI strings go in `assets/locales/pending/<slug>.json`, ATTRIBUTION rows in `attribution/pending/<slug>.md`: `cargo xtask lists`.
- A changed default keeps the old behaviour behind a preference and fills the PR's `Changes a default:` line, and no second PR for an issue a lower-numbered one closes: `pr-checks.yml`.
- A changed default keeps the old behaviour behind a preference and fills the PR's `Changes a default:` line: `pr-checks.yml`.
- A regression test goes in the area's existing test file, never a per-bug file (#3226).
- Look at open PRs first, claim with a draft PR (lowest number wins), one topic per PR, never force-push `main`, no pushes just to catch up with `main`: `skills/solidcraft-contributing/SKILL.md`.
- Look at open PRs first, claim with a draft PR (lowest number wins), one topic per PR: `skills/solidcraft-contributing/SKILL.md`.
- A PR's title and first sentence make sense to someone who never saw your chat or the issue: `skills/solidcraft-contributing/SKILL.md`.
- Code, comments, commit messages and docs are in English, always: `skills/solidcraft-contributing/SKILL.md` ("Working as an agent").
- Independent work runs in parallel, dependent work stays sequential: `skills/solidcraft-contributing/SKILL.md` ("Working as an agent").
- Show observable changes with real screenshots or a recording, captured yourself.
- Run `cargo xtask ci` before every commit, without switching branches while it runs. `cargo xtask skills` keeps this file and `skills/` honest.
- Run `cargo xtask ci` before every commit. `cargo xtask skills` keeps this file and `skills/` honest.
@@ -82,7 +82,6 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/fonts/ibm-plex-mono/IBMPlexMono-Regular.ttf | IBM Corp. (IBM Plex Mono) | https://github.com/IBM/plex (via google/fonts), unmodified; licence text in assets/fonts/ibm-plex-mono/OFL.txt; the interface monospace font | SIL OFL 1.1 |
| assets/fonts/ibm-plex-sans/IBMPlexSans-Variable.ttf | IBM Corp. (IBM Plex Sans, variable wdth and wght) | https://github.com/IBM/plex (via google/fonts), unmodified; licence text in assets/fonts/ibm-plex-sans/OFL.txt; the default interface font | SIL OFL 1.1 |
| docs/book/src/generated/tool-preview.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/tool-preview.json`; gitignored) | MIT OR Apache-2.0 |
| assets/fonts/liberation-sans/LiberationSans-Regular.ttf | Red Hat, Inc. (Liberation Fonts 2.x; digitized data Google) | https://github.com/liberationfonts (Debian fonts-liberation), unmodified; licence text in assets/fonts/liberation-sans/OFL.txt; used for sketch Text outlines | SIL OFL 1.1 |
| assets/fonts/biz-udp-gothic/BIZUDPGothic-Regular.ttf | The BIZ UDGothic Project Authors | https://github.com/googlefonts/morisawa-biz-ud-gothic (Google Fonts), unmodified; licence text in assets/fonts/biz-udp-gothic/OFL.txt; used for web UI Japanese font | SIL OFL 1.1 |
| assets/fonts/craft-ui-sc/CraftUI-SC.otf | Adobe / Google Inc. (Noto Sans SC); SolidCraft subset | https://github.com/notofonts/noto-cjk Sans/SubsetOTF/SC Regular, glyph-subset for assets/locales/zh.json and renamed Craft UI SC (OFL reserved-name); licence text in assets/fonts/craft-ui-sc/OFL.txt; web UI Simplified Chinese | SIL OFL 1.1 |
| assets/fonts/craft-ui-tc/CraftUI-TC.otf | Adobe / Google Inc. (Noto Sans TC); SolidCraft subset | https://github.com/notofonts/noto-cjk Sans/SubsetOTF/TC Regular, glyph-subset for assets/locales/zh-TW.json and renamed Craft UI TC (OFL reserved-name); licence text in assets/fonts/craft-ui-tc/OFL.txt; web UI Traditional Chinese | SIL OFL 1.1 |
@@ -147,7 +146,6 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/fonts/craft-ui-tc/OFL.txt | Adobe / Google Inc. (Noto CJK); SolidCraft header | Accompanying OFL for CraftUI-TC.otf | SIL OFL 1.1 |
| assets/fonts/ibm-plex-mono/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/ibm-plex-sans/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/liberation-sans/OFL.txt | Red Hat, Inc.; Liberation Fonts contributors | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/icons/app/linux/exports/hicolor/128x128/apps/io.tangencylabs.solidcraft.png | SolidCraft contributors | Generated from assets/icons/app/shared/source/app_icon.rs with the original CLI/ICO encoders | MIT OR Apache-2.0 |
| assets/icons/app/linux/exports/hicolor/16x16/apps/io.tangencylabs.solidcraft.png | SolidCraft contributors | Generated from assets/icons/app/shared/source/app_icon.rs with the original CLI/ICO encoders | MIT OR Apache-2.0 |
| assets/icons/app/linux/exports/hicolor/24x24/apps/io.tangencylabs.solidcraft.png | SolidCraft contributors | Generated from assets/icons/app/shared/source/app_icon.rs with the original CLI/ICO encoders | MIT OR Apache-2.0 |
@@ -317,7 +315,6 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/icons/ui/design/svg/model/circle_ttt.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/coil.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/colored_components.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/colored_components_off.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/combine.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/component.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
@@ -787,6 +784,63 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| assets/locales/pending/theme-blur-ui.json | SolidCraft contributors | Original blur controls, notices and translations | MIT OR Apache-2.0 |
| crates/ui-egui/tests/fixtures/theme-blur.json | SolidCraft contributors | Original theme for blur option scenarios and manager review | MIT OR Apache-2.0 |
| assets/locales/ka.json | David Machakhelidze (devius) | Original Georgian translation of SolidCraft's English catalog, written with Claude Code from the meaning of each English string; terminology and doubtful strings decided by a native Georgian speaker; no commercial CAD text used | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-mark.svg | SolidCraft contributors | static SolidCraft mark: the five faces and gradients of assets/icons/app/macos/source/SolidCraft.icon/Assets/03-solid-blue-cutout.svg (the final frame of assets/styles/web/loading-logo.svg), cropped to the mark's bounds; original artwork | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-mark-mono-black.svg | SolidCraft contributors | one-colour (black) version of assets/branding/logo/solidcraft-mark.svg, same paths; original artwork | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-mark-mono-white.svg | SolidCraft contributors | one-colour (white) version of assets/branding/logo/solidcraft-mark.svg, same paths; original artwork | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-mark-512.png | SolidCraft contributors | transparent 512 px render of assets/branding/logo/solidcraft-mark.svg (cairosvg); original artwork | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-mark-1024.png | SolidCraft contributors | transparent 1024 px render of assets/branding/logo/solidcraft-mark.svg (cairosvg); original artwork | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-mark-2048.png | SolidCraft contributors | transparent 2048 px render of assets/branding/logo/solidcraft-mark.svg (cairosvg); original artwork | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-wordmark.svg | SolidCraft contributors | the name SolidCraft set like the loading logo's wordmark (bold, +0.02 em tracking, #15499e) in IBM Plex Sans Bold from assets/fonts/ibm-plex-sans (SIL OFL 1.1, IBM Corp.), outlined to paths; no font file is embedded | MIT OR Apache-2.0 |
| assets/branding/logo/solidcraft-lockup-horizontal.svg | SolidCraft contributors | assets/branding/logo/solidcraft-mark.svg beside assets/branding/logo/solidcraft-wordmark.svg, in the proportions of assets/branding/web/source/og.png; original artwork | MIT OR Apache-2.0 |
| assets/styles/ui/themes/onyx.json | SolidCraft contributors | original Onyx stone-grey palette, option overlays and semantic icon-role mapping; existing SolidCraft artwork is unchanged | MIT OR Apache-2.0 |
| docs/book/src/media/ui-tour/window.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (`solidcraft --sample`, default dark theme, software renderer, 1280x800) with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/ui-tour/navigate.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (`--sample`, default dark theme, software renderer) orbiting, panning and zooming, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| assets/locales/pending/sketch-tool-hints.json | carlymx | Original sketch tool hints and engine error translations | MIT OR Apache-2.0 |
| assets/locales/pending/primitive-pick-field-tips.json | SolidCraft contributors | Original primitive pick-field tooltip translations | MIT OR Apache-2.0 |
| assets/locales/pending/ribbon-panel-hover.json | SolidCraft contributors | Original ribbon panel menu preference labels and translations | MIT OR Apache-2.0 |
| docs/screenshots/box-insert-designer.gif | Shawn Marx | original recording made with BoxInsertDesigner's own Motion export (its three.js viewer) of its example game `examples/ccg-example` (https://github.com/ShawnMarx/BoxInsertDesigner): a card game box insert whose trays were built by SolidCraft through `solidcraft-cli`; the published card, board and box art in it is pixelated beyond recognition, and no logos or game names are shown (2.5× playback, 800 px wide) | MIT OR Apache-2.0 |
| docs/screenshots/box-insert-designer.mp4 | Shawn Marx | original recording made with BoxInsertDesigner's own Motion export (its three.js viewer) of its example game `examples/ccg-example` (https://github.com/ShawnMarx/BoxInsertDesigner): a card game box insert whose trays were built by SolidCraft through `solidcraft-cli`; the published card, board and box art in it is pixelated beyond recognition, and no logos or game names are shown (1280×720) | MIT OR Apache-2.0 |
| assets/locales/pending/agent-http-consent.json | SolidCraft contributors | Original endpoint-specific HTTP consent messages and translations | MIT OR Apache-2.0 |
| assets/locales/pending/ground-shadow-placement.json | SolidCraft contributors | Original ground-shadow placement preference messages and translations | MIT OR Apache-2.0 |
| docs/book/src/media/assemblies/components.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) making components from two original hinge-leaf bodies, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/assemblies/joint.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) creating a revolute joint between two hinge leaves, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/assemblies/drag.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) dragging a jointed hinge leaf, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/assemblies/drive.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) driving a revolute joint between two hinge leaves, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/features/extrude.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) extruding a sketch's profile, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/features/shell.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) shelling a block, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/features/fillet.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) filleting four edges, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/features/edit.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) editing a feature from the timeline, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/features/hole.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) placing a hole, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/features/pattern.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) patterning a hole around an axis, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/parameters/dialog.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (default dark theme, software renderer) showing the Parameters dialog, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/files/menu.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (`--sample`, default dark theme, software renderer) showing the File menu, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/getting-started/start.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (default dark theme, software renderer, 1280x800) showing the start page with its built-in sample thumbnails, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/getting-started/sample.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) opening the built-in Sample Plate from the start page, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sheet-metal/base.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) making a sheet metal base flange, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sheet-metal/flange.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) adding sheet metal edge flanges, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sheet-metal/flat.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) showing a sheet metal flat pattern, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sketching/create.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) starting a sketch on the Top plane, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sketching/draw.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) drawing a rectangle and a circle with typed values, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sketching/dimension.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) dimensioning a sketch until it is fully constrained, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sketching/parts.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (default dark theme, software renderer, 1280x800) showing a fully constrained sketch, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sketching/offset.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) offsetting a sketch outline, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| docs/book/src/media/sketching/trim.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) trimming a notch in a sketch, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
| assets/locales/ca.json | carlymx | Catalan translation of the English catalog, contributed upstream | MIT OR Apache-2.0 |
| assets/locales/pending/sketch-mirror-auto-line.json | SolidCraft contributors | Original Mirror preference label and translations | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-01-extrude5-edge-frame.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-04-preview-outer-l11.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-05-preview-inner-l8.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-06-result-outer-120.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-07-preview-360.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-08-cancelled.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-13-colliding-id.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-14-surface-l1.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/demo-15-surface-result.png | SamD98 | screenshot of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| docs/screenshots/7452/revolve-selected-edge.mp4 | SamD98 | screen recording of the actual SolidCraft desktop UI showing the revolve axis pick on the Cat Post Topper repro design (docs/screenshots/7452/revolve-edge-frame.solidcraft), for #7452 | MIT OR Apache-2.0 |
| assets/locales/bg.json | Yasen-55 | Original translation | MIT OR Apache-2.0 |
| crates/sketch/assets/fonts/liberation-sans/LiberationSans-Regular.ttf | Red Hat, Inc. (Liberation Fonts 2.x; digitized data Google) | https://github.com/liberationfonts (Debian fonts-liberation), unmodified; licence text in crates/sketch/assets/fonts/liberation-sans/OFL.txt; used for sketch Text outlines | SIL OFL 1.1 |
| crates/sketch/assets/fonts/liberation-sans/OFL.txt | Red Hat, Inc.; Liberation Fonts contributors | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/locales/pending/drag-to-zoom.json | SolidCraft contributors | Original drag-to-zoom labels and translations | MIT OR Apache-2.0 |
## Code adapted from sibling projects
@@ -838,7 +892,7 @@ into THIRD-PARTY-LICENSES.txt when `main` regenerates it.
## FreeCAD and Rhino import library
FreeCAD `.FCStd` and Rhino `.3dm` files are read with [cadmpeg](https://github.com/cadmpeg/cadmpeg)
0.6.3 (Apache-2.0), linked as the crates `cadmpeg-core`, `cadmpeg-ir`, `cadmpeg-registry`,
0.6.7 (Apache-2.0), linked as the crates `cadmpeg-core`, `cadmpeg-ir`, `cadmpeg-registry`,
`cadmpeg-container`, `cadmpeg-codec-freecad`, `cadmpeg-codec-rhino` and `cadmpeg-codec-step`
in native and browser builds (`crates/io/src/native_cad.rs`). Only those open-format codecs are built: no
default features, so cadmpeg's codecs for commercial CAD formats and its ShapeManager/ACIS
@@ -856,11 +910,10 @@ copied into SolidCraft.
| Directory | Source | Licence | Changes |
|---|---|---|---|
| vendor/accesskit_macos | accesskit_macos 0.26.3, https://github.com/AccessKit/accesskit (The AccessKit contributors) | MIT OR Apache-2.0 | the subclassing adapter and its tests from 0.27.2: dropping the adapter keeps AppKit's key-value observers (vendor/README.md) |
## Vendored renderer compatibility fix
`vendor/egui-wgpu` is egui-wgpu 0.36.2 from https://github.com/emilk/egui
`vendor/egui-wgpu` is egui-wgpu 0.37.0 from https://github.com/emilk/egui
(MIT OR Apache-2.0; both original licence texts are included). Rust sources and
its original `egui.wgsl` shader are retained; no images or other artwork are copied.
SolidCraft's narrow patch selects a safe 1x MSAA path on the chosen OpenGL adapter
Desktop view DXF export runs in the file-operation worker with five-stage progress and
cooperative cancellation. Curve tolerance (0.0001–1 mm, default 0.01 mm) is remembered alongside
the hidden-edge setting. Cancelled exports preserve the model and the previous destination;
@@ -231,6 +225,12 @@ completed drawings publish atomically. The browser still exports synchronously.
## Render foundation
- Wood surface images (#1345): native CPU and GPU opaque rendering share physical
repeat frames and filtered mip chains. Imported maps retain exact bytes and
declared provenance in the design, reopen offline, and expose grain-angle
controls. Scalar face appearances suppress body maps. Planar projection and
CPU encoding/optical limits remain explicit; see [portable surfaces](docs/render-portable-surfaces-and-stages.md).
- Original starter appearances (#1722): 34 opaque recipes through existing commands, with six explicitly unavailable glass recipes and preserved legacy looks; see [the contract](docs/render-starter-appearances.md).
- Bounded linear film accumulation (#1696) supplies caller-admitted mean/variance storage and complete-pass views; actual progressive consumers remain separate. See [the film contract](docs/render-film.md).
//! solidcraft-cli mcp setup [--dry-run] [--client NAME] [--live] (alias: mcp install) add it to OpenCode, Claude Desktop, Claude Code, Cursor
//! solidcraft-cli licences SolidCraft's licence and the third-party licences
@@ -64,7 +64,7 @@ struct Command {
/// `run`'s lines in the usage.
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--profile-out trace.json] [--json-out FILE] [--allow-errors] [--validation each_step|each_feature|off]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--validation: when SMLib's full check runs on the features computed (diagnostics.validation), default each_feature)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n (--profile also records where the time goes, SMLib's calls, kernel operations, features, commands and import stages,\n and prints the table to stderr: count, total, self time and longest per span; --profile-out FILE writes the spans\n as a Chrome trace for chrome://tracing or ui.perfetto.dev; SOLIDCRAFT_PROFILE=1 does the same for any command)\n";
/// `eval`'s lines in the usage.
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] [--profile] [--profile-out trace.json] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n (--profile and --profile-out as for run)\n";
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] [--profile] [--profile-out trace.json] [--validation each_step|each_feature|off] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n (--profile, --profile-out and --validation as for run)\n";
/// `script`'s lines in the usage.
constUSAGE_SCRIPT: &str=" solidcraft-cli script <design.sc|script.json> [--out script.json]\n (the design's history as a command script that eval and run replay)\n";
constUSAGE_MCP: &str=" solidcraft-cli mcp [--headless] [--in design.sc|script.json] [--connect 127.0.0.1:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]\n [--param-check off|warn|strict] [--render-gpu]\n solidcraft-cli mcp setup [--dry-run] [--client opencode|claude-desktop|claude-code|cursor] [--live]\n (adds a `solidcraft` server, with this program's path, to each installed AI client; --live adds `solidcraft-live` for the running app; alias: mcp install)\n";
constUSAGE_MCP: &str=" solidcraft-cli mcp [--headless] [--in design.sc|script.json] [--connect 127.0.0.1:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]\n [--param-check off|warn|strict] [--render-gpu] [--compact]\n (--compact, SOLIDCRAFT_MCP_COMPACT=1 or the app's Preferences › AI (with --connect): compact tool output for\n agents: inspect_design summarises sketches and takes `sketches` by name and a `bodies` filter, and tool JSON\n is not pretty-printed; off by default)\n solidcraft-cli mcp setup [--dry-run] [--client opencode|claude-desktop|claude-code|cursor] [--live]\n (adds a `solidcraft` server, with this program's path, to each installed AI client; --live adds `solidcraft-live` for the running app; alias: mcp install)\n";
/// `crashes`'s lines in the usage.
constUSAGE_CRASHES: &str=" solidcraft-cli crashes [list [--json] | show <id> | replay <id> | dir | clear [<id>]]\n";
/// Runs `solidcraft-cli eval` (and its `inspect` alias), opening the input design or script with the requested `--validation` mode and reporting both `inspect.measure` and `document.inspect`.
| AppImage | Uses the Linux 256 px image and `.DirIcon` alias |
| FreeBSD | Shares Linux hicolor images and freedesktop metadata |
| Web | HTML/Trunk and `manifest.webmanifest` stay in `apps/solidcraft-web/`; copies the Japanese font/licence to `fonts/` and the Noto Sans Arabic, KR, SC and TC fonts with their licences to `fonts/<family>/` (fetched when a drawing's text needs them), uses the collected CSS, and copies the Linux 32/256/512 px images to `icons/` for the favicon and installed app |
| Web | HTML/Trunk and `manifest.webmanifest` stay in `apps/solidcraft-web/`; copies Japanese font/licence to `fonts/`, uses the collected CSS, and copies the Linux 32/256/512 px images to `icons/` for the favicon and installed app |
| Docs and link previews | `xtask book` copies the shared card to the existing `/solidcraft/og.png` public path |
## Code and provenance
Resources remain compiled by their owning layer through existing APIs:
`ui-egui::icons::paint_icon` and `Tokens` at L5, model presets in L2 `doc`, and sketch
fonts at L1. State, projection, interaction, commands and GPU bindings stay in
fonts at L1. The sketch crate owns its built-in Liberation Sans font and OFL
licence under `crates/sketch/assets/fonts/liberation-sans/`, so Cargo source
packages and vendored builds include both files. State, projection, interaction, commands and GPU bindings stay in
their current modules. Embedded data uses `CARGO_MANIFEST_DIR`; application code
needs no runtime resource registry or repository lookup.
| `logo/solidcraft-mark-mono-white.svg` | One-colour print on dark material, such as a white print on a dark shirt. |
| `logo/solidcraft-mark-512.png`, `-1024.png`, `-2048.png` | Transparent square PNGs for places that don't take SVG: avatars, social posts, slides, print shops that ask for a bitmap (send the 2048). |
| `logo/solidcraft-wordmark.svg` | The name on its own, outlined to paths. |
| `logo/solidcraft-lockup-horizontal.svg` | Mark and name side by side: headers, banners, shirt fronts, wide stickers. |
| `web/source/og.png` | The existing link preview card for the docs site. |
The gaps between the faces are part of the logo. In the colour and one-colour files they are
transparent, so the material shows through. For a die-cut sticker, cut around the outer shape
and let the backing colour (white is best) fill the gaps.
## Colours
The mark's five faces each use a two-stop gradient from the icon source:
"cmd.inspect_colored_components":"Omogući boje komponenti",
"cmd.inspect_colored_components_disable":"Onemogući boje komponenti",
"cmd.inspect_compare":"Uporedi tijela",
"cmd.inspect_compare_picture":"Uporedi sliku",
"cmd.inspect_continuity":"Analiza kontinuiteta",
@@ -1623,7 +1621,7 @@
"help.sketch.insert_svg":"Učitava putanje SVG crteža u skicu, skalirane, zakrenute i postavljene gdje zadate. Koristite ga da logotip ili vektorski obris pretvorite u krive koje možete ekstrudirati.",
"help.sketch.inspect":"Otvara izvještaj o otvorenoj skici: koliko je stepeni slobode preostalo i je li potpuno ograničena. Koristite ga da saznate šta se još pomjera prije nego što završite skicu.",
"help.sketch.intersect":"Dodaje krive ili tačke gdje tijela, lica, ivice ili druge skice sijeku ravan skice. Ostaju povezane i prate model kada se promijeni.",
"help.sketch.intersection_curve":"Pravi 3D krive tamo gdje se dva tijela ili lica sastaju, povezane s njima. Koristite ih kao putanje ili vodilice koje prate model.",
"help.sketch.intersection_curve":"Pravi 3D krive tamo gdje se dva tijela, lica ili krive drugih skica sastaju, povezane s njima. Koristite ih kao putanje ili vodilice koje prate model.",
"help.sketch.isoparametric_curve":"Pravi 3D krivu u smjeru U ili V lica kroz tačku koju izaberete, povezanu s licem. Koristite je kao putanju ili liniju razdvajanja koja prati površ.",
"help.sketch.line":"Crta povezane linije tačku po tačku, kao otvoreni lanac ili zatvoren obris. To je osnovni alat za većinu profila.",
"help.sketch.line.midpoint":"Crta liniju od njene središnje tačke do jednog kraja, a drugi kraj se preslikava. Koristite je za linije centrirane na tački, npr. simetričnu ivicu.",
"help.sketch.insert_svg":"Læser stierne i en SVG-tegning ind i en skitse, skaleret, drejet og placeret, som du angiver. Brug den til at gøre et logo eller en vektorkontur til kurver, du kan ekstrudere.",
"help.sketch.inspect":"Åbner en rapport om den åbne skitse: hvor mange frihedsgrader der er tilbage, og om den er fuldt bundet. Brug den til at finde ud af, hvad der stadig kan bevæge sig, før du afslutter skitsen.",
"help.sketch.intersect":"Tilføjer de kurver eller punkter, hvor emner, flader, kanter eller andre skitser krydser skitseplanet. De forbliver linkede og følger modellen, når den ændres.",
"help.sketch.intersection_curve":"Opretter 3D-kurver, hvor to emner eller flader mødes, linket til dem. Brug dem som baner eller styrekurver, der følger modellen.",
"help.sketch.intersection_curve":"Opretter 3D-kurver, hvor to emner, flader eller kurver fra andre skitser mødes, linket til dem. Brug dem som baner eller styrekurver, der følger modellen.",
"help.sketch.isoparametric_curve":"Opretter en 3D-kurve langs en flades U- eller V-retning gennem et punkt, du vælger, linket til fladen. Brug den som bane eller delelinje, der følger overfladen.",
"help.sketch.line":"Tegner forbundne linjer punkt for punkt som en åben kæde eller en lukket kontur. Det er det grundlæggende værktøj til de fleste profiler.",
"help.sketch.line.midpoint":"Tegner en linje fra dens midtpunkt ud til den ene ende, og den anden ende spejles. Brug den til linjer centreret om et punkt, f.eks. en symmetrisk kant.",
@@ -3809,6 +3807,8 @@
"sample.plate.name":"Eksempelplade",
"sample.vents.about":"Slidser i et rektangulært mønster: Rækker, kolonner og deling er parametre",
"sample.vents.name":"Ventilationsplade",
"scale.per_axis":"Per akse",
"scale.uniform":"Ensartet",
"search.command_keys":"Enter kør Shift+Enter kør og hold åben Esc luk",
"Surface, or faces to turn over":"Fläche oder umzudrehende Flächen",
"Surfaces":"Flächen",
"Swap Ends":"Enden vertauschen",
@@ -641,6 +643,7 @@
"Target":"Ziel",
"Target Body":"Zielkörper",
"Target Face (optional)":"Zielfläche (optional)",
"Target edges":"Zielkanten",
"Tear":"Reißen",
"Technical details":"Technische Details",
"The dashed sketch is a saved plane guide. Select a new face to repair the attachment.":"Die gestrichelte Skizze ist eine gespeicherte Ebenenführung. Wählen Sie eine neue Fläche, um die Anbindung zu reparieren.",
@@ -648,6 +651,7 @@
"The direction must be an axis or a straight sketch curve that lies in the sketch plane":"Die Richtung muss eine Achse oder eine gerade Skizzenkurve in der Skizzenebene sein",
"The mirror line cannot also be mirrored":"Die Spiegellinie kann nicht gleichzeitig gespiegelt werden",
"The mirror line must be a straight curve of this sketch, not an origin axis":"Die Spiegellinie muss eine gerade Kurve dieser Skizze sein, keine Ursprungsachse",
"The origin axis is perpendicular to the sketch plane, so it has no line in the plane":"Die Ursprungsachse steht senkrecht auf der Skizzenebene und hat daher keine Linie in ihr",
"The saved author occurrence is missing. Select a valid author placement before rebinding.":"Das gespeicherte Autorvorkommen fehlt. Wählen Sie vor dem erneuten Anbinden eine gültige Autorplatzierung.",
"Then":"Then",
"These features will be deleted:":"Diese Merkmale werden gelöscht:",
@@ -689,6 +693,7 @@
"Unsuppress Selected Folders":"Unterdrückung der ausgewählten Ordner aufheben",
"Updating the preview":"Vorschau wird aktualisiert",
"Use active author placement":"Aktive Autorplatzierung verwenden",
"Use axis direction only":"Nur Achsenrichtung verwenden",
"Use selected face as fixed plane":"Ausgewählte Fläche als feste Ebene verwenden",
@@ -739,6 +744,9 @@
"a picked edge's body is gone":"der Körper einer gewählten Kante existiert nicht mehr",
"add a key for a joint first":"zuerst einen Schlüssel für ein Gelenk hinzufügen",
"ai.connected_toast":"SolidCraft ist jetzt in {clients} verfügbar. Starten Sie diese neu, um es zu nutzen (Einstellungen > Assistent).",
"ai.http.allow":"Unsicheres HTTP erlauben",
"ai.http.confirm":"Für diesen Endpunkt erlauben",
"ai.http.warning":"Der API-Schlüssel und die Unterhaltung werden unverschlüsselt gesendet. Jeder mit Zugriff auf das Netzwerk kann sie lesen oder verändern. Verwenden Sie dies nur in einem vertrauenswürdigen Netzwerk.",
"ai.prefs.allow_control_note":"Ein lokaler Kanal (MCP). Nichts verlässt diesen Computer.\n\nÖffnet einen Steuerkanal nur auf diesem Computer (127.0.0.1, Port 27878 oder der nächste freie). Ein verbindendes Programm muss zusätzlich ein geheimes Token vorweisen, das nur Ihr Benutzerkonto lesen kann und bei jedem Start neu erzeugt wird. Wirkt ab dem nächsten Start von SolidCraft. Aus: Es wartet nichts auf Verbindungen, außer Sie starten SolidCraft mit --control.",
"dialog.cylinder_face_tip":"Die Fläche oder der Eckpunkt des Modells, auf dem der Zylinder steht: hier klicken, dann in der Ansicht darauf klicken. Leer gelassen platzieren ihn X, Y und Z.",
"dialog.dimension_insert_hint":"Doppelklicken Sie auf eine andere steuernde Bemaßung, um ihren Namen einzufügen",
"dialog.no_shown_body":"Kein sichtbarer Körper zum Ändern vorhanden. Blenden Sie einen Körper ein oder wählen Sie „Neuer Körper“.",
"dialog.pattern_sketch_not_object":"Körper oder Funktionen wählen: Eine Skizze ist keines von beiden. Ihre Kurven mit Muster oder Spiegeln in der Skizze wiederholen oder sie zuerst extrudieren.",
"dialog.primitive_point_tip":"Ein Punkt, der X, Y und Z füllt: hier klicken, dann einen Eckpunkt, eine Kante oder Fläche des Modells, einen Punkt einer Skizze oder den Ursprung anklicken.",
"dialog.reference_edge_tip":"Eine gerade Kante der gewählten Fläche, von der aus der Abstand darunter gemessen wird: hier klicken, dann die Kante anklicken.",
"dialog.select":"↖ Auswählen",
"dialog.selected_count":"↖ {count} ausgewählt",
"dialog.selection_constraint":"Bedingung {id}",
@@ -1442,10 +1454,16 @@
"each rail's curves must be in one sketch":"die Kurven jeder Führungskurve müssen in derselben Skizze liegen",
"feature computation ended without a result":"die Berechnung des Merkmals wurde ohne Ergebnis beendet",
"file.open.drawing_filter":"Designs, CAD-Dateien, Netze und Zeichnungen",
"file.open.portal_fallback.no_portal_service":"Die geöffnete Dateiauswahl ist nicht die des Desktops: Der Dateiauswahl-Dienst des Desktops ist nicht verfügbar.",
"file.open.portal_fallback.no_session_bus":"Die geöffnete Dateiauswahl ist nicht die des Desktops: Es gibt keinen D-Bus-Sitzungsbus.",
"file.open.portal_fallback.xwayland":"Die geöffnete Dateiauswahl ist nicht die des Desktops: Unter XWayland lehnt das Portal das Elternfenster ab.",
"file_load.built":"Bisher erstellt: {built} von {total} Merkmalen.",
"file_load.converting":"Volumenkörper {done} von {total} wird konvertiert",
"file_load.inserted":"{name} eingefügt",
"file_load.inserting":"Geometrie wird eingefügt",
"file_load.link_item":"{name} ({done} von {total})",
"file_load.opened":"{name} geöffnet",
"file_load.opened_in_tab":"{name} in neuem Tab geöffnet",
"file_load.opening":"Design wird geöffnet",
"file_load.preparing_thumbnail":"Vorschaubild wird vorbereitet...",
"file_load.preparing_view":"Ansicht wird vorbereitet...",
@@ -1681,7 +1699,7 @@
"help.sketch.insert_svg":"Liest die Pfade einer SVG-Zeichnung in eine Skizze ein, skaliert, gedreht und an der gewünschten Stelle. Damit machen Sie aus einem Logo oder einer Vektorkontur Kurven, die sich extrudieren lassen.",
"help.sketch.inspect":"Öffnet einen Bericht zur offenen Skizze: wie viele Freiheitsgrade übrig sind und ob sie vollständig bestimmt ist. Damit sehen Sie, was sich noch bewegt, bevor Sie die Skizze abschließen.",
"help.sketch.intersect":"Fügt die Kurven oder Punkte hinzu, an denen Körper, Flächen, Kanten oder andere Skizzen die Skizzenebene schneiden. Sie bleiben verknüpft und folgen Änderungen am Modell.",
"help.sketch.intersection_curve":"Erzeugt 3D-Kurven, wo sich zwei Körper oder Flächen treffen, mit diesen verknüpft. Als Pfade oder Leitkurven, die dem Modell folgen.",
"help.sketch.intersection_curve":"Erzeugt 3D-Kurven, wo sich zwei Körper, Flächen oder Kurven anderer Skizzen treffen, mit diesen verknüpft. Als Pfade oder Leitkurven, die dem Modell folgen.",
"help.sketch.isoparametric_curve":"Erzeugt eine 3D-Kurve in U- oder V-Richtung einer Fläche durch einen gewählten Punkt, mit der Fläche verknüpft. Als Pfad oder Trennlinie, die der Fläche folgt.",
"help.sketch.line":"Zeichnet verbundene Linien Punkt für Punkt, als offene Kette oder geschlossene Kontur. Das Grundwerkzeug für die meisten Profile.",
"help.sketch.line.midpoint":"Zeichnet eine Linie von ihrem Mittelpunkt zu einem Ende, das andere Ende gespiegelt. Für Linien, die auf einem Punkt mittig liegen, etwa eine symmetrische Kante.",
@@ -2020,6 +2038,8 @@
"nav.blender.help":"Mittlere Maustaste dreht, Umschalt+Mitte verschiebt, Strg+Mitte zoomt; rechtes Ziehen lässt die Kamera unverändert",
"nav.creo.help":"Ziehen mit der mittleren Maustaste dreht, Umschalt+Mitte verschiebt, Strg+Mitte zoomt beim vertikalen Ziehen (nach unten zum Vergrößern); das Mausrad zoomt",
"nav.creo.label":"Creo",
"nav.drag_keeps_mode.help":"Ein Ziehen mit der mittleren oder rechten Taste dreht, verschiebt oder zoomt weiter wie begonnen, bis die Taste losgelassen wird, egal welche Tasten dabei gedrückt oder losgelassen werden. Aus: Die gehaltenen Tasten entscheiden in jedem Moment des Ziehens.",
"nav.drag_keeps_mode.label":"Ziehen behält die Navigation bei, mit der es begann",
"nav.free_orbit.help":"Maus und 3D-Maus drehen über beide Pole hinweg und behalten die Rollneigung bei. Das Einrasten mit Umschalt ist deaktiviert.",
"nav.free_orbit.label":"Freie Drehung",
"nav.free_orbit.snap_help":"Maus und 3D-Maus drehen über beide Pole hinweg und behalten die Rollausrichtung bei. Halten Sie beim Ziehen zum Drehen die Umschalttaste gedrückt, um Blickrichtung und Rollausrichtung einrasten zu lassen.",
"network.always_allow":"Diesen Server immer erlauben",
@@ -2277,6 +2298,8 @@
"prefs.browser_eye_left":"Auge neben dem Aufklapppfeil",
"prefs.browser_eye_left_note":"Browserzeilen zeigen ihr Auge zum Ein- und Ausblenden wie bisher neben dem Aufklapppfeil statt in einer Spalte am rechten Zeilenende.",
"prefs.browser_rows_start_closed_note":"Platzierungen und Ordner im Browser beginnen geschlossen, sodass ein Entwurf mit vielen Komponenten seine obersten Zeilen zeigt. Jede öffnet sich mit ihrem Pfeil, „Alle ausklappen“ oder „Im Browser suchen“, das nur die Zeilen bis zu seinem Körper öffnet und die von der letzten Suche geöffneten wieder schließt. Ein in der 3D-Ansicht gewählter Körper lässt den Browser, wie er ist. Ist es aus, beginnen die Ordner geöffnet, Platzierungen so, wie „Komponenten zu Beginn aufgeklappt“ es festlegt, und eine Auswahl in der 3D-Ansicht öffnet den Browser bis zu ihrem Körper, wie bisher.",
"prefs.browser_show_note":"Angezeigt lässt den Browser auf dem Bildschirm. Beim Überfahren einblenden blendet ihn aus, bis der Zeiger über seinen Platz oder die schmale Lasche an seinem linken Rand kommt; er bleibt offen, solange der Zeiger darin ist oder ein Menü daraus offen ist.",
"prefs.contact_shading_note":"Erzeugt weiche Schatten an Stellen, an denen sich Bauteile nahekommen.",
"prefs.context_menu":"Kontextmenü",
@@ -2330,10 +2354,11 @@
"prefs.dimension_values_view":"In der Ansicht",
"prefs.dimension_values_window":"In einem Fenster",
"prefs.display":"Anzeige",
"prefs.drawings":"Zeichnungen",
"prefs.edges":"Kanten und Schattierung",
"prefs.extend":"Erweitern",
"prefs.extra_navigation":"Mit Strg und gedrückter linker Maustaste auf einer freien Fläche drehen. Leertaste gedrückt halten, um die Ansicht zu verschieben.",
"prefs.extrude_arrow_face_stops":"Extrusionspfeil hält an Flächen",
"prefs.extrude_arrow_face_stops_note":"Beim Ziehen des Abstandspfeils von Extrusion hält er an ebenen Flächen parallel zum Profil, etwa an der Rückseite eines Blocks, in den geschnitten wird, und hebt die Fläche hervor. Aus: Der Pfeil bewegt sich nur in runden Schritten.",
"prefs.extrude_view_isometric":"Beim Öffnen von Extrudieren isometrisch ausrichten",
"prefs.extrude_view_return":"Beim Schließen von Extrudieren zur vorigen Ansicht zurück",
"prefs.follows_os":"Wie im Betriebssystem",
@@ -2383,6 +2408,8 @@
"prefs.graphics_page.surfaces_edges":"Flächen und Kanten",
"prefs.graphics_page.view_bar":"Auch in der Ansichtsleiste",
"prefs.graphics_presets_note":"Mit den Profilen werden die unten aufgeführten Optionen gemeinsam eingestellt.",
"prefs.ground_shadow_follows_model":"Bodenschatten folgt dem Modell",
"prefs.ground_shadow_follows_model_help":"Den Schatten unter dem niedrigsten sichtbaren Körper platzieren. Wenn deaktiviert, bleibt der Schatten angehobener Modelle auf der Bodenebene durch den Ursprung.",
"prefs.hide_constraint_glyphs_zoomed_out":"Bindungssymbole bei starkem Herauszoomen ausblenden",
"prefs.hide_constraint_glyphs_zoomed_out_note":"Bindungssymbole verschwinden, wenn die Skizze so weit herausgezoomt ist, dass sie sie überladen würden. Aus: sie behalten bei jedem Zoom eine feste Bildschirmgröße.",
"prefs.history":"Verlauf",
@@ -2418,6 +2445,8 @@
"prefs.layout_page.card":"Karte",
"prefs.layout_page.column":"Spalte",
"prefs.layout_page.hover":"Bei Mauszeiger",
"prefs.layout_page.hover_panel_menus":"Bereichsmenüs beim Darüberfahren wechseln",
"prefs.layout_page.hover_panel_menus_help":"Klicken Sie auf einen Bereichsnamen, um das Menü zu öffnen. Bewegen Sie den Zeiger auf einen anderen Bereichsnamen, um das Menü zu wechseln. Außerhalb des Menübands und des geöffneten Menüs schließt es sich.",
"prefs.move_drag_highlights":"Hervorheben, was unter dem Zeiger liegt, während die Pfeile von Verschieben eine Komponente ziehen",
"prefs.move_drag_highlights_tip":"Aus: Solange die Pfeile von Verschieben eine Komponente ziehen, wird nichts unter dem Zeiger hervorgehoben; so bleiben große Baugruppen flüssig. Mit einem Schnitt oder einer Analyse wird es trotzdem hervorgehoben, und ein entlang seiner Gelenke gezogenes Teil hebt nie etwas hervor.",
"prefs.navigation":"Navigation",
"prefs.navigation.axes_signed":"Achsen",
"prefs.navigation.cube_compact":"Würfel",
@@ -2520,6 +2551,8 @@
"prefs.quality_smoother":"Stärker geglättet",
"prefs.quick_measure":"Schnellmessung in der Ecke der Ansicht",
"prefs.quick_measure_note":"Zeigt unten rechts in der Ansicht die Größe der Auswahl an: bei einer Kante die Länge, bei einer kreisförmigen Kante zusätzlich Durchmesser (Ø) und Radius (R), bei einer Fläche den Flächeninhalt, bei einem Punkt die Position, bei zwei Elementen Abstand und Winkel sowie bei mehreren Kanten oder Flächen die Gesamtlänge bzw. Gesamtfläche. Ein Klick kopiert den Messwert.",
"prefs.remember_dialog_values.help":"Standardmäßig aus. Wenn aktiviert, werden nach erfolgreicher Ausführung eines Befehls seine sicheren Werte und Optionen beim nächsten Öffnen desselben Befehls wiederverwendet, bis SolidCraft geschlossen wird.",
"prefs.render_previous_geometry_budget":"Bisheriges Geometriebudget für die Render-Vorschau verwenden",
"prefs.render_previous_geometry_budget_help":"Stellt die bisherige feste Obergrenze für die Geometrie wieder her (512 MiB auf 64-Bit-Desktop-Systemen, andernfalls 128 MiB) anstelle des geräteabhängigen Budgets.",
"prefs.select_hidden_edges":"Verdeckte Kanten in der schattierten Ansicht mit verdeckten Kanten auswählen",
"prefs.select_hidden_edges_help":"Kanten durch Flächen auswählen, wenn die schattierte Ansicht mit verdeckten Kanten aktiv ist, auch zum Verrunden. Aus behält das Auswahlverhalten von v0.30.1 bei. Ausgeblendete Körper bleiben ausgeschlossen.",
"prefs.select_one_item":"Ein Element auswählen",
"prefs.select_other_hidden":"Verborgene Geometrie mit „Andere auswählen“ auswählen",
"prefs.select_other_hidden_help":"Ein: Verborgene Körper, Skizzen und verdeckte Kanten nahe dem Zeiger einbeziehen. Aus: Die ursprüngliche Liste sichtbarer Geometrie direkt unter dem Zeiger verwenden.",
@@ -2559,6 +2594,8 @@
"prefs.sketch.click_selects":"Klick wählt",
"prefs.sketch.conflict_colour":"Konfliktfarbe",
"prefs.sketch.drawing":"Zeichnen",
"prefs.sketch.ellipse_axes":"Ellipsen mit ihren Achsen zeichnen",
"prefs.sketch.ellipse_axes_note":"Haupt- und Nebenachse als Konstruktionslinien, damit Halbachsen und Achsen bemaßt werden können. Aus: nur die Ellipse, und D darauf ergibt ihren Nebenradius, wohin der Wert auch gezogen wird, gezeichnet und mit R beschriftet wie bisher.",
"prefs.sketch.exit_unless_rotated":"Außer bei Drehung",
@@ -2592,6 +2629,7 @@
"prefs.sketch_exit_view_note":"Legt fest, zu welcher Ansicht nach „Skizze beenden“, „Abbrechen“ oder zweimaligem Drücken der Esc-Taste gewechselt wird.",
"prefs.sketch_face_activates_part":"Skizzieren auf der Fläche eines Teils aktiviert dieses Teil",
"prefs.sketch_face_activates_part_note":"Eine Skizze, die auf einer Fläche am Körper einer anderen Komponente begonnen wird, aktiviert zuerst diese Komponente, sodass die Skizze zu ihr gehört und im Browser bei diesem Teil bleibt. Das Teil bleibt danach aktiv. Aus: Die Skizze gehört zur aktiven Komponente.",
"prefs.sketch_mirror_auto_line":"Vorausgewählte Konstruktionslinie zum Spiegeln verwenden",
"prefs.sketch_open_look_at":"Beim Öffnen einer Skizze auf sie ausrichten",
"prefs.sketch_open_look_at_note":"Aus: Beim Erstellen oder Bearbeiten einer Skizze bleibt die Ansicht, wie sie ist. „Ansehen“ richtet die Ansicht bei Bedarf auf die Skizze aus.",
"prefs.sketch_recent_snap":"Automatisch an zuletzt verwendete Mittelpunkte fangen",
@@ -3249,9 +3287,11 @@
"render.frame_wide":"16:9 · Breitbild",
"render.gpu_depth":"Maximale Pfadtiefe",
"render.gpu_options_help":"Samples, Tiefe, Startwert und Belichtung werden mit diesem Setup gespeichert. Es wird nur die aktive Bildmethode gespeichert.",
"render.gpu_path_crashed":"SolidCraft wurde beim letzten Einrichten auf diesem Grafikadapter beendet, wahrscheinlich im Grafiktreiber, und richtet ihn deshalb nicht von selbst erneut ein. Verwenden Sie stattdessen Raytracing auf der CPU oder versuchen Sie es erneut (nach einem Treiberupdate wird es ebenfalls erneut versucht).",
"render.gpu_path_failed":"GPU-Pathtracer nicht verfügbar",
"render.gpu_path_first_setup":"Das erste Setup auf dieser GPU kann mehrere Minuten dauern; SolidCraft bleibt währenddessen bedienbar. Spätere Starts verwenden die kompilierten Shader erneut, sofern der Treiber sie behält.",
"render.gpu_path_preparing":"GPU-Pathtracer: Shader werden kompiliert…",
"render.gpu_path_retry":"Erneut versuchen",
"render.gpu_seed":"Zufallsstartwert",
"render.gpu_unavailable":"GPU-Pathtracing ist auf diesem Gerät nicht bereit.",
"render.ground_apply":"Boden anpassen und speichern",
@@ -3865,6 +3905,7 @@
"render.stage_panels.extent":"Ausdehnung",
"render.stage_panels.fit_save":"Einpassen und speichern",
"render.stage_panels.kept_fields":"Kamera, Abtastung, Abmessungen, optische Bindungen, CAD-Geometrie und technische Eigenschaften.",
@@ -3983,6 +4024,19 @@
"render.subsurface_enable":"Random Walk für innere Streuung",
"render.subsurface_help":"Nur für geschlossene Dielektrika. Streuung und RGB-Absorption sind getrennte Koeffizienten pro mm. Pfade streuen innerhalb der tatsächlichen Geometrie und werden dann an der Grenzfläche gebrochen oder reflektiert. Deaktivieren Sie die Transmission gerader Schattenstrahlen, das Entrauschen von Oberflächen und das äußere Volumen; verwenden Sie eine Fresnel-Schicht. Kein Diffusions-Shader, kein Dichtegitter und kein gemessenes Material. Dichte Medien können mehr Samples und Pfadtiefe benötigen.",
"render.subsurface_rate":"Streukollisionsrate",
"render.surface_import.author":"Autor",
"render.surface_import.busy":"Bild wird importiert…",
"render.surface_import.complete":"Wählen Sie ein Bild und geben Sie Autor, Quelle und Lizenz an.",
"render.surface_import.save":"Bild am Körper speichern",
"render.surface_import.saved_cpu":"Speichern Sie Texturen für das CPU-Rendering.",
"render.surface_import.source":"Quelle",
"render.surface_import.title":"Bild importieren",
"render.tone_aces_fitted":"ACES angepasst",
"render.tone_reinhard":"Reinhard",
"render.transmission_scope":"GPU-Glas unterstützt zertifizierte getrennte Medien. Unbeschränkt verschachtelte Medien und ein rauschfreier Transmissionsschätzer werden nicht bereitgestellt.",
@@ -4059,6 +4113,8 @@
"sample.plate.name":"Beispielplatte",
"sample.vents.about":"Langlöcher in einem Rechteckmuster: Zeilen, Spalten und Abstand sind Parameter",
"sample.vents.name":"Lüftungsplatte",
"scale.per_axis":"Je Achse",
"scale.uniform":"Gleichmäßig",
"search.command_keys":"Eingabe ausführen Umschalt+Eingabe ausführen und offen lassen Esc schließen",
"ui.mcp_compact_note":"Für Agenten, die über den MCP-Server (solidcraft-cli mcp) verbunden sind: inspect_design fasst Skizzen zusammen und Werkzeugergebnisse werden nicht formatiert, sodass sie weniger Tokens verbrauchen. Gilt für Agentensitzungen, die nach der Änderung beginnen; --compact oder SOLIDCRAFT_MCP_COMPACT=1 schalten es ebenfalls ein.",
"ui.measure":"Messen",
"ui.mesh_format_3mf":"3MF",
"ui.mesh_format_3mf_tagged":"3MF mit Flächenmarken",
"ui.part_size_needs_a_part":"Wählen Sie ein eingefügtes Standardbauteil (Schraube, Mutter, Scheibe oder Stift) aus, um seine Größe zu ändern. Einen Körper vergrößern oder verkleinern Sie mit Skalieren.",
"view_gizmo.no_such_body":"Diese Konstruktion hat keinen Körper mit diesem Namen.",
"view_gizmo.note":"Wählen Sie einen Körper in der Ansicht. Er wird mit Ihren Einstellungen und Einstellungsprofilen gespeichert und in jeder Konstruktion angezeigt. Klicken Sie auf eine seiner Flächen, um direkt darauf zu blicken.",
"view_gizmo.texture":"Textur",
"view_gizmo.themed":"Design",
"view_gizmo.too_detailed":"Zu detailliert für den Ansichtsnavigator (über 10.000 Dreiecke)",
"view_gizmo.too_thin":"Zu lang und dünn für den Ansichtsnavigator: Die dünnste Seite muss mindestens ein Fünftel der längsten sein",
"web.files.insert_drawings_hint":"CAD-Dateien, Netze, DXF oder SVG in das geöffnete Design",
"web.files.insert_stored_drawings_hint":"In das geöffnete Design (CAD-Dateien, Netze, DXF, SVG)",
"cmd.render_effects_describe":"Lens and Creative Effects",
@@ -87,6 +86,7 @@
"prefs.max_file_size_web":"The web app opens STEP and import files up to 512 MB and designs up to 256 MB: a browser tab can't hold larger files. The desktop app can raise these limits.",
"prefs.megabytes":"MB",
"prefs.network_locations_note":"For organisations that keep designs on file servers. Off: only servers you allow.",
"prefs.select_hidden_edges_help":"Select edges through faces when Shaded with hidden edges is active, including for Fillet. Off keeps v0.30.1 selection behaviour. Hidden bodies stay unselectable.",
"prefs.sketch.center_arc":"Centre-point arc follows the cursor",
"prefs.sketch.conflict_colour":"Conflict colour",
"prefs.sketch.tracking_guides":"Centre and midpoint guides",
@@ -235,6 +235,12 @@
"render.studio_area_help":"Up to four one-sided rectangles. Orthogonal half-edges U and V define size; U × V faces the lit side. Coordinates are world-space millimetres.",
"render.studio_center":"Centre X, Y, Z (mm)",
"render.studio_hdr_help":"Radiance .hdr, 2:1 panorama, up to 2048 × 1024. EXR is unavailable. The colour assumption applies only when primaries are unspecified.",
"render.surface_import.complete":"Choose an image and enter its author, source and licence.",
"cmd.inspect_colored_components":"Activer les couleurs des composants",
"cmd.inspect_colored_components_disable":"Désactiver les couleurs des composants",
"cmd.inspect_compare":"Comparer les corps",
"cmd.inspect_compare_picture":"Comparer les images",
"cmd.inspect_continuity":"Analyse de continuité",
@@ -1365,11 +1363,14 @@
"dialog.computing":"Calcul… {seconds} s",
"dialog.could_not_be_checked":"non vérifiable",
"dialog.custom_axis":"↖ Axe personnalisé",
"dialog.cylinder_face_tip":"La face ou le sommet du modèle sur lequel le cylindre est posé : cliquer ici, puis dessus dans la vue. Laissé vide, X, Y et Z le placent.",
"dialog.dimension_insert_hint":"Double-cliquez sur une autre cote pilotante pour insérer son nom",
"dialog.dimension_name":"Cote : {name}",
"dialog.edit_title":"MODIFIER {title}",
"dialog.no_shown_body":"Aucun corps affiché à modifier: affichez-en un ou choisissez Nouveau corps",
"dialog.pattern_sketch_not_object":"Choisissez des corps ou des fonctions : une esquisse n'est ni l'un ni l'autre. Répétez ses courbes avec la Répétition ou la Symétrie de l'esquisse, ou extrudez-la d'abord.",
"dialog.primitive_point_tip":"Un point qui remplit X, Y et Z : cliquer ici, puis sur un sommet, une arête ou une face du modèle, sur un point d'une esquisse ou sur l'origine.",
"dialog.reference_edge_tip":"Une arête droite de la face choisie, depuis laquelle la distance ci-dessous est mesurée : cliquer ici, puis sur l'arête.",
"help.sketch.insert_svg":"Lit les tracés d'un dessin SVG dans une esquisse, mis à l'échelle, tournés et placés comme vous le définissez. À utiliser pour transformer un logo ou un contour vectoriel en courbes que vous pouvez extruder.",
"help.sketch.inspect":"Ouvre un rapport sur l'esquisse ouverte: combien de degrés de liberté il reste et si elle est entièrement contrainte. À utiliser pour savoir ce qui bouge encore avant de terminer l'esquisse.",
"help.sketch.intersect":"Ajoute les courbes ou points où des corps, faces, arêtes ou d'autres esquisses traversent le plan d'esquisse. Ils restent liés et suivent le modèle lorsqu'il change.",
"help.sketch.intersection_curve":"Crée des courbes 3D là où deux corps ou faces se rencontrent, liées à eux. À utiliser comme trajectoires ou rails guides qui suivent le modèle.",
"help.sketch.intersection_curve":"Crée des courbes 3D là où deux corps, faces ou courbes d'autres esquisses se rencontrent, liées à eux. À utiliser comme trajectoires ou rails guides qui suivent le modèle.",
"help.sketch.isoparametric_curve":"Crée une courbe 3D le long de la direction U ou V d'une face, par un point que vous choisissez, liée à la face. À utiliser comme trajectoire ou ligne de partage qui suit la surface.",
"help.sketch.line":"Dessine des lignes connectées point par point, en chaîne ouverte ou en contour fermé. C'est l'outil de base de la plupart des profils.",
"help.sketch.line.midpoint":"Dessine une ligne de son milieu vers une extrémité, l'autre extrémité étant son symétrique. À utiliser pour des lignes centrées sur un point, comme une arête symétrique.",
@@ -2200,6 +2201,8 @@
"prefs.edges":"Arêtes et ombrage",
"prefs.extend":"Étendre",
"prefs.extra_navigation":"Ctrl+glisser gauche dans le vide fait orbiter; maintenir Espace pour un panoramique.",
"prefs.extrude_arrow_face_stops":"La flèche d'extrusion s'arrête aux faces",
"prefs.extrude_arrow_face_stops_note":"En faisant glisser la flèche de distance d'Extrusion, elle s'arrête aux faces planes parallèles au profil, comme l'autre côté d'un bloc qu'on découpe, et souligne la face. Désactivé : la flèche avance seulement par pas ronds.",
"prefs.extrude_view_isometric":"Passer la vue en isométrique à l'ouverture de l'extrusion",
"prefs.extrude_view_return":"Revenir à la vue précédente à la fermeture de l'extrusion",
"prefs.follows_os":"Suit le système",
@@ -2279,6 +2282,8 @@
"prefs.mouse":"Souris et pavé tactile",
"prefs.mouse_heading":"Souris",
"prefs.mouse_mapping":"Affectation des boutons de la souris",
"prefs.move_drag_highlights":"Mettre en évidence ce qui est sous le pointeur pendant que les flèches de Déplacer font glisser un composant",
"prefs.move_drag_highlights_tip":"Désactivé : pendant que les flèches de Déplacer font glisser un composant, rien n’est mis en évidence sous le pointeur, ce qui garde les grands assemblages fluides. Avec une coupe ou une analyse affichée, la mise en évidence reste, et une pièce glissée le long de ses liaisons n’en montre jamais.",
"prefs.navigation":"Navigation",
"prefs.navigation_note":"Comment la souris, le pavé tactile et la souris 3D déplacent la vue.",
"prefs.navigator_fit":"Cadrer le modèle après un changement de vue du repère de navigation",
@@ -3001,9 +3006,11 @@
"render.frame_wide":"16:9 · Écran large",
"render.gpu_depth":"Profondeur maximale des chemins",
"render.gpu_options_help":"Les échantillons, la profondeur, la graine et l'exposition sont enregistrés avec ce préréglage. Seule la méthode d'image active est enregistrée.",
"render.gpu_path_crashed":"SolidCraft s’est fermé pendant sa dernière préparation sur cet adaptateur graphique, très probablement dans le pilote graphique ; il n’est donc plus préparé de lui-même. Utilisez le lancer de rayons sur le CPU, ou réessayez (une mise à jour du pilote réessaie aussi).",
"render.gpu_path_failed":"Traceur de chemins GPU indisponible",
"render.gpu_path_first_setup":"La première initialisation sur ce GPU peut prendre plusieurs minutes; SolidCraft reste utilisable pendant ce temps. Les démarrages suivants réutilisent les shaders compilés lorsque le pilote les conserve.",
"render.gpu_path_preparing":"Traceur de chemins GPU: compilation des shaders…",
"render.gpu_path_retry":"Réessayer",
"render.gpu_seed":"Graine aléatoire",
"render.gpu_unavailable":"Le tracé de chemins GPU n'est pas prêt sur cet appareil.",
"render.ground_apply":"Ajuster et enregistrer le sol",
@@ -3811,6 +3818,8 @@
"sample.plate.name":"Plaque d'exemple",
"sample.vents.about":"Rainures en répétition rectangulaire: lignes, colonnes et pas sont des paramètres",
"sample.vents.name":"Plaque d'aération",
"scale.per_axis":"Par axe",
"scale.uniform":"Uniforme",
"search.command_keys":"Entrée exécuter Maj+Entrée exécuter et garder ouvert Échap fermer",
"search.commands":"Commandes",
"search.design":"Dans cette conception",
@@ -4440,6 +4449,7 @@
"ui.click_selects_whole_bodies":"Un clic sélectionne des corps entiers",
"ui.click_then_press_key":"Cliquer, puis appuyer sur la nouvelle touche",
"ui.close":"Fermer",
"ui.close_tab":"Fermer l’onglet",
"ui.coil":"Hélice",
"ui.coincident":"Coïncidence",
"ui.collapse":"Réduire",
@@ -4923,6 +4933,7 @@
"ui.point_cloud_add_filter":"Ajouter un filtre…",
"ui.point_cloud_auto_range":"Plage automatique",
"ui.point_cloud_color_by":"Colorer par",
"ui.point_cloud_dots":"Points isolés",
"ui.point_cloud_file_colors":"Couleurs du fichier",
"cmd.inspect_accessibility":"Análise de accesibilidade",
"cmd.inspect_center_of_mass":"Centro de masas",
"cmd.inspect_clearance":"Folga",
"cmd.inspect_colored_components":"Activar as cores dos compoñentes",
"cmd.inspect_colored_components_disable":"Desactivar as cores dos compoñentes",
"cmd.inspect_compare":"Comparar corpos",
"cmd.inspect_compare_picture":"Comparar a imaxe",
"cmd.inspect_continuity":"Análise de continuidade",
@@ -1623,7 +1621,7 @@
"help.sketch.insert_svg":"Le os trazados dun debuxo SVG nun bosquexo, escalados, xirados e colocados onde indiques. Úsao para converter un logotipo ou un contorno vectorial en curvas que podes extruír.",
"help.sketch.inspect":"Abre un informe do bosquexo aberto: cantos graos de liberdade quedan e se está totalmente restrinxido. Úsao para saber o que aínda se move antes de rematar o bosquexo.",
"help.sketch.intersect":"Engade as curvas ou os puntos onde corpos, caras, arestas ou outros bosquexos cruzan o plano do bosquexo. Quedan ligados e seguen o modelo cando cambia.",
"help.sketch.intersection_curve":"Crea curvas 3D onde se atopan dous corpos ou caras, ligadas a eles. Úsaas como traxectorias ou guías que seguen o modelo.",
"help.sketch.intersection_curve":"Crea curvas 3D onde se atopan dous corpos, caras ou curvas doutros bosquexos, ligadas a eles. Úsaas como traxectorias ou guías que seguen o modelo.",
"help.sketch.isoparametric_curve":"Crea unha curva 3D na dirección U ou V dunha cara por un punto que escollas, ligada á cara. Úsaa como traxectoria ou liña de división que segue a superficie.",
"help.sketch.line":"Debuxa liñas conectadas punto a punto, como cadea aberta ou como contorno pechado. É a ferramenta básica para a maioría dos perfís.",
"help.sketch.line.midpoint":"Debuxa unha liña desde o seu punto medio ata un extremo, co outro extremo reflectido. Úsao para liñas centradas nun punto, como unha aresta simétrica.",
@@ -3809,6 +3807,8 @@
"sample.plate.name":"Placa de exemplo",
"sample.vents.about":"Ranuras nun patrón rectangular: filas, columnas e paso son parámetros",
"sample.vents.name":"Placa de ventilación",
"scale.per_axis":"Por eixo",
"scale.uniform":"Uniforme",
"search.command_keys":"Intro executar Maiús+Intro executar e manter aberto Esc pechar",
"cmd.inspect_colored_components":"Omogući boje komponenti",
"cmd.inspect_colored_components_disable":"Onemogući boje komponenti",
"cmd.inspect_compare":"Usporedi tijela",
"cmd.inspect_compare_picture":"Usporedi sliku",
"cmd.inspect_continuity":"Analiza kontinuiteta",
@@ -1623,7 +1621,7 @@
"help.sketch.insert_svg":"Čita putanje SVG crteža u skicu, skalirane, zakrenute i postavljene kako zadate. Upotrijebite ga za pretvaranje logotipa ili vektorskog obrisa u krivulje koje možete ekstrudirati.",
"help.sketch.inspect":"Otvara izvješće o otvorenoj skici: koliko je stupnjeva slobode preostalo i je li potpuno ograničena. Upotrijebite ga kako biste saznali što se još pomiče prije dovršetka skice.",
"help.sketch.intersect":"Dodaje krivulje ili točke u kojima tijela, lica, bridovi ili druge skice presijecaju ravninu skice. Ostaju povezane i prate model kad se promijeni.",
"help.sketch.intersection_curve":"Izrađuje 3D krivulje na mjestu gdje se dva tijela ili lica susreću, povezane s njima. Upotrijebite ih kao putanje ili vodilice koje prate model.",
"help.sketch.intersection_curve":"Izrađuje 3D krivulje na mjestu gdje se dva tijela, lica ili krivulje drugih skica susreću, povezane s njima. Upotrijebite ih kao putanje ili vodilice koje prate model.",
"help.sketch.isoparametric_curve":"Izrađuje 3D krivulju u smjeru U ili V lica kroz točku koju odaberete, povezanu s licem. Upotrijebite je kao putanju ili liniju razdvajanja koja prati plohu.",
"help.sketch.line":"Crta povezane linije točku po točku, kao otvoreni lanac ili zatvoreni obris. To je osnovni alat za većinu profila.",
"help.sketch.line.midpoint":"Crta liniju od njezine središnje točke do jednog kraja, a drugi kraj zrcali. Upotrijebite ga za linije centrirane na točku, primjerice simetričan brid.",
"help.sketch.insert_svg":"Beolvassa egy SVG-rajz útvonalait egy vázlatba, az Ön által megadott léptékkel, elforgatással és helyen. Használja egy logó vagy vektoros körvonal kihúzható görbékké alakítására.",
"help.sketch.inspect":"Jelentést nyit a megnyitott vázlatról: hány szabadságfok maradt, és teljesen kényszerezett-e. Használja annak kiderítésére, mi mozdul még, mielőtt befejezi a vázlatot.",
"help.sketch.intersect":"Hozzáadja azokat a görbéket vagy pontokat, ahol testek, lapok, élek vagy más vázlatok metszik a vázlatsíkot. Kapcsoltak maradnak, és követik a modellt, ha az megváltozik.",
"help.sketch.intersection_curve":"3D görbéket hoz létre ott, ahol két test vagy lap találkozik, hozzájuk kapcsolva. Használja őket útvonalként vagy vezérgörbeként, amely követi a modellt.",
"help.sketch.intersection_curve":"3D görbéket hoz létre ott, ahol két test, lap vagy más vázlatok görbéi találkozik, hozzájuk kapcsolva. Használja őket útvonalként vagy vezérgörbeként, amely követi a modellt.",
"help.sketch.isoparametric_curve":"3D görbét hoz létre egy lap U vagy V iránya mentén egy kiválasztott ponton át, a laphoz kapcsolva. Használja útvonalként vagy osztóvonalként, amely követi a felületet.",
"help.sketch.line":"Összefüggő vonalakat rajzol pontról pontra, nyitott láncként vagy zárt körvonalként. Ez a legtöbb profil alapeszköze.",
"help.sketch.line.midpoint":"Vonalat rajzol a felezőpontjától az egyik végéig, a másik véget tükrözve. Használja egy pontra középen álló vonalakhoz, például szimmetrikus élhez.",
@@ -3809,6 +3807,8 @@
"sample.plate.name":"Mintalemez",
"sample.vents.about":"Hornyok téglalap mintában: a sorok, oszlopok és osztás paraméterek",
"sample.vents.name":"Szellőzőlemez",
"scale.per_axis":"Tengelyenként",
"scale.uniform":"Egyenletes",
"search.command_keys":"Enter futtatás Shift+Enter futtatás és nyitva tartás Esc bezárás",
"cmd.inspect_colored_components":"Aktifkan Warna Komponen",
"cmd.inspect_colored_components_disable":"Nonaktifkan Warna Komponen",
"cmd.inspect_compare":"Bandingkan Bodi",
"cmd.inspect_compare_picture":"Bandingkan dengan Gambar",
"cmd.inspect_continuity":"Analisis Kontinuitas",
@@ -1623,7 +1621,7 @@
"help.sketch.insert_svg":"Membaca path gambar SVG ke dalam sketsa, diskalakan, diputar, dan ditempatkan sesuai pengaturan Anda. Gunakan untuk mengubah logo atau kontur vektor menjadi kurva yang dapat diekstrusi.",
"help.sketch.inspect":"Membuka laporan tentang sketsa yang terbuka: berapa derajat kebebasan yang tersisa dan apakah sketsa terbatasi penuh. Gunakan untuk mengetahui apa yang masih bergerak sebelum Anda menyelesaikan sketsa.",
"help.sketch.intersect":"Menambahkan kurva atau titik tempat bodi, muka, tepi, atau sketsa lain memotong bidang sketsa. Semuanya tetap tertaut dan mengikuti model saat model berubah.",
"help.sketch.intersection_curve":"Membuat kurva 3D di tempat dua bodi atau muka bertemu, tertaut padanya. Gunakan sebagai jalur atau rel pemandu yang mengikuti model.",
"help.sketch.intersection_curve":"Membuat kurva 3D di tempat dua bodi, muka, atau kurva sketsa lain bertemu, tertaut padanya. Gunakan sebagai jalur atau rel pemandu yang mengikuti model.",
"help.sketch.isoparametric_curve":"Membuat kurva 3D sepanjang arah U atau V sebuah muka melalui titik yang Anda pilih, tertaut ke muka itu. Gunakan sebagai jalur atau garis pisah yang mengikuti permukaan.",
"help.sketch.line":"Menggambar garis-garis tersambung titik demi titik, sebagai rantai terbuka atau kontur tertutup. Ini alat dasar untuk sebagian besar profil.",
"help.sketch.line.midpoint":"Menggambar garis dari titik tengahnya ke satu ujung, dengan ujung lainnya dicerminkan. Gunakan untuk garis yang dipusatkan pada sebuah titik, seperti tepi simetris.",
@@ -3809,6 +3807,8 @@
"sample.plate.name":"Pelat Contoh",
"sample.vents.about":"Slot dalam pola persegi panjang: baris, kolom, dan pitch adalah parameter",
"sample.vents.name":"Pelat Ventilasi",
"scale.per_axis":"Per sumbu",
"scale.uniform":"Seragam",
"search.command_keys":"Enter jalankan Shift+Enter jalankan dan tetap buka Esc tutup",
"dialog.cylinder_face_tip":"La faccia o il vertice del modello su cui poggia il cilindro: fai clic qui, poi su di esso nella vista. Se resta vuoto, lo posizionano X, Y e Z.",
"dialog.dimension_insert_hint":"Fai doppio clic su un’altra quota di controllo per inserirne il nome",
"dialog.dimension_name":"Quota: {name}",
"dialog.edit_title":"MODIFICA {title}",
"dialog.no_shown_body":"Nessun corpo visibile da modificare: mostrane uno o scegli Nuovo corpo",
"dialog.pattern_sketch_not_object":"Seleziona corpi o lavorazioni: uno schizzo non è nessuno dei due. Ripeti le sue curve con Ripetizione o Specchia dello schizzo stesso, oppure estrudilo prima.",
"dialog.primitive_point_tip":"Un punto che compila X, Y e Z: fai clic qui, poi su un vertice, uno spigolo o una faccia del modello, su un punto di uno schizzo oppure sull'origine.",
"dialog.reference_edge_tip":"Uno spigolo rettilineo della faccia scelta da cui si misura la distanza sotto: fai clic qui, poi sullo spigolo.",
"dialog.select":"↖ Seleziona",
"dialog.selected_count":"↖ Selezionati: {count}",
"dialog.selection_constraint":"Vincolo {id}",
@@ -1624,7 +1625,7 @@
"help.sketch.insert_svg":"Legge i tracciati di un disegno SVG in uno schizzo, scalati, ruotati e posizionati come imposti. Usalo per trasformare un logo o un contorno vettoriale in curve che puoi estrudere.",
"help.sketch.inspect":"Apre un rapporto sullo schizzo aperto: quanti gradi di libertà restano e se è completamente vincolato. Usalo per scoprire cosa si muove ancora prima di terminare lo schizzo.",
"help.sketch.intersect":"Aggiunge le curve o i punti in cui corpi, facce, spigoli o altri schizzi attraversano il piano dello schizzo. Restano collegati e seguono il modello quando cambia.",
"help.sketch.intersection_curve":"Crea curve 3D dove si incontrano due corpi o facce, collegate a essi. Usale come percorsi o guide che seguono il modello.",
"help.sketch.intersection_curve":"Crea curve 3D dove si incontrano due corpi, facce o curve di altri schizzi, collegate a essi. Usale come percorsi o guide che seguono il modello.",
"help.sketch.isoparametric_curve":"Crea una curva 3D lungo la direzione U o V di una faccia passante per un punto che scegli, collegata alla faccia. Usala come percorso o linea di divisione che segue la superficie.",
"help.sketch.line":"Disegna linee collegate punto per punto, come catena aperta o contorno chiuso. È lo strumento di base per la maggior parte dei profili.",
"help.sketch.line.midpoint":"Disegna una linea dal suo punto medio fino a un'estremità, con l'altra estremità speculare. Usalo per linee centrate su un punto, come un bordo simmetrico.",
@@ -3812,6 +3813,8 @@
"sample.plate.name":"Piastra di esempio",
"sample.vents.about":"Asole in ripetizione rettangolare: righe, colonne e passo sono parametri",
"sample.vents.name":"Piastra di ventilazione",
"scale.per_axis":"Per asse",
"scale.uniform":"Uniforme",
"search.command_keys":"Invio esegui Maiusc+Invio esegui e tieni aperto Esc chiudi",
"cmd.inspect_colored_components":"Aktifkan Warna Komponen",
"cmd.inspect_colored_components_disable":"Nyahaktifkan Warna Komponen",
"cmd.inspect_compare":"Bandingkan Jasad",
"cmd.inspect_compare_picture":"Banding dengan Imej",
"cmd.inspect_continuity":"Analisis Keselanjaran",
@@ -1623,7 +1621,7 @@
"help.sketch.insert_svg":"Membaca laluan lukisan SVG ke dalam lakaran, diskalakan, diputar dan diletakkan mengikut tetapan anda. Gunakan untuk menukar logo atau garis luar vektor kepada lengkung yang boleh disemperit.",
"help.sketch.inspect":"Membuka laporan tentang lakaran yang terbuka: berapa banyak darjah kebebasan yang tinggal dan sama ada ia terkekang sepenuhnya. Gunakan untuk mengetahui apa yang masih bergerak sebelum anda menamatkan lakaran.",
"help.sketch.intersect":"Menambah lengkung atau titik tempat jasad, muka, tepi atau lakaran lain melintasi satah lakaran. Ia kekal terpaut dan mengikut model apabila model berubah.",
"help.sketch.intersection_curve":"Mencipta lengkung 3D tempat dua jasad atau muka bertemu, terpaut kepadanya. Gunakan sebagai laluan atau rel pemandu yang mengikut model.",
"help.sketch.intersection_curve":"Mencipta lengkung 3D tempat dua jasad, muka atau lengkung lakaran lain bertemu, terpaut kepadanya. Gunakan sebagai laluan atau rel pemandu yang mengikut model.",
"help.sketch.isoparametric_curve":"Mencipta lengkung 3D di sepanjang arah U atau V muka melalui titik yang anda pilih, terpaut kepada muka itu. Gunakan sebagai laluan atau garis belahan yang mengikut permukaan.",
"help.sketch.line":"Melukis garis bersambung titik demi titik, sebagai rantaian terbuka atau garis luar tertutup. Ia ialah alat asas bagi kebanyakan profil.",
"help.sketch.line.midpoint":"Melukis garis daripada titik tengahnya ke satu hujung, dengan hujung satu lagi dicerminkan. Gunakan untuk garis yang berpusat pada satu titik, seperti tepi simetri.",
@@ -3809,6 +3807,8 @@
"sample.plate.name":"Plat Contoh",
"sample.vents.about":"Corak slot segi empat tepat: baris, lajur dan pic sebagai parameter",
"sample.vents.name":"Plat Pengudaraan",
"scale.per_axis":"Mengikut paksi",
"scale.uniform":"Seragam",
"search.command_keys":"Enter jalankan Shift+Enter jalankan dan kekalkan terbuka Esc tutup",
"help.sketch.insert_svg":"Leser banene fra en SVG-tegning inn i en skisse, skalert, dreid og plassert slik du angir. Bruk det til å gjøre en logo eller vektorkontur om til kurver du kan ekstrudere.",
"help.sketch.inspect":"Åpner en rapport om den åpne skissen: hvor mange frihetsgrader som gjenstår og om den er fullstendig bundet. Bruk det til å finne ut hva som fortsatt beveger seg før du fullfører skissen.",
"help.sketch.intersect":"Legger til kurvene eller punktene der kropper, flater, kanter eller andre skisser krysser skisseplanet. De forblir koblet og følger modellen når den endres.",
"help.sketch.intersection_curve":"Oppretter 3D-kurver der to kropper eller flater møtes, koblet til dem. Bruk dem som baner eller føringskurver som følger modellen.",
"help.sketch.intersection_curve":"Oppretter 3D-kurver der to kropper, flater eller kurver fra andre skisser møtes, koblet til dem. Bruk dem som baner eller føringskurver som følger modellen.",
"help.sketch.isoparametric_curve":"Oppretter en 3D-kurve langs U- eller V-retningen til en flate gjennom et punkt du velger, koblet til flaten. Bruk den som en bane eller delelinje som følger flaten.",
"help.sketch.line":"Tegner sammenhengende linjer punkt for punkt, som en åpen kjede eller en lukket kontur. Det er det grunnleggende verktøyet for de fleste profiler.",
"help.sketch.line.midpoint":"Tegner en linje fra midtpunktet og ut til den ene enden, med den andre enden speilet. Bruk det til linjer sentrert på et punkt, for eksempel en symmetrisk kant.",
@@ -3809,6 +3807,8 @@
"sample.plate.name":"Eksempelplate",
"sample.vents.about":"Spor i et rektangulært mønster: rader, kolonner og stigning er parametere",
"sample.vents.name":"Ventilasjonsplate",
"scale.per_axis":"Per akse",
"scale.uniform":"Jevn",
"search.command_keys":"Enter kjør Shift+Enter kjør og behold åpen Esc lukk",
"help.sketch.insert_svg":"Leest de paden van een SVG-tekening in een schets, geschaald, gedraaid en geplaatst waar je instelt. Gebruik dit om een logo of vectorcontour om te zetten in curven die je kunt extruderen.",
"help.sketch.inspect":"Opent een rapport over de geopende schets: hoeveel vrijheidsgraden er nog over zijn en of hij volledig beperkt is. Gebruik dit om te zien wat nog beweegt voordat je de schets voltooit.",
"help.sketch.intersect":"Voegt de curven of punten toe waar lichamen, vlakken, randen of andere schetsen het schetsvlak kruisen. Ze blijven gekoppeld en volgen het model wanneer dat verandert.",
"help.sketch.intersection_curve":"Maakt 3D-curven waar twee lichamen of vlakken samenkomen, eraan gekoppeld. Gebruik ze als paden of geleiders die het model volgen.",
"help.sketch.intersection_curve":"Maakt 3D-curven waar twee lichamen, vlakken of curven van andere schetsen samenkomen, eraan gekoppeld. Gebruik ze als paden of geleiders die het model volgen.",
"help.sketch.isoparametric_curve":"Maakt een 3D-curve langs de U- of V-richting van een vlak door een punt dat je kiest, gekoppeld aan het vlak. Gebruik dit als pad of splitslijn die het oppervlak volgt.",
"help.sketch.line":"Tekent verbonden lijnen punt voor punt, als open keten of gesloten contour. Het is het basisgereedschap voor de meeste profielen.",
"help.sketch.line.midpoint":"Tekent een lijn vanuit zijn middelpunt naar één uiteinde, waarbij het andere uiteinde wordt gespiegeld. Gebruik dit voor lijnen die op een punt zijn gecentreerd, zoals een symmetrische rand.",
@@ -3820,6 +3818,8 @@
"sample.plate.name":"Voorbeeldplaat",
"sample.vents.about":"Sleuven in een rechthoekig patroon: rijen, kolommen en spoed zijn parameters",
"sample.vents.name":"Ventilatieplaat",
"scale.per_axis":"Per as",
"scale.uniform":"Uniform",
"search.command_keys":"Enter uitvoeren Shift+Enter uitvoeren en open houden Esc sluiten",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
bherbruck
