Regenerate generated files and fold pending files [skip ci]

Update egui/eframe to 0.37 (#9933 )
* Update egui/eframe to 0.37 (WIP) egui, eframe and egui-wgpu 0.36 -> 0.37. SolidCraft's egui-wgpu patch is rebased onto 0.37.0; the vendored accesskit_macos is dropped (0.27.2 has the #7535 fix). Not finished: 36 solidcraft-ui-egui lib tests fail, and the full lib run crashes with SIGSEGV when tests run in parallel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: clear texture deltas that egui 0.37 refuses to drop Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop non-finite pointer input before egui; keep test time monotonic egui 0.37 debug-asserts on NaN wheel deltas, on time moving backwards in the pointer history, and on add_space inside a Grid. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Hold a click that follows typing in the same frame until the next frame egui 0.37 drops a field's focus on a click elsewhere when the field first reads its style, before it reads the frame's typing, so text typed in the frame of a click was lost. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Name a document tab's close button "Close tab" egui 0.37 names an unnamed widget after its tooltip, so the tab's × became a second control named Close beside a dialog's. The space mouse guard test now clicks where each button was: by name it found nothing behind the guard. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Turn on egui's default_fonts: 0.37 no longer does The built-in Hack is the UI's symbol fallback (#2955). The app got it through eframe, but solidcraft-ui-egui on its own (its tests) did not. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Text menu: act on the selection the menu click took the focus from egui 0.37 drops a field's focus on a click elsewhere before the field draws, and an unfocused field loses its selection, so Copy, Cut and Paste from the right-click menu saw no selection. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Placement field: keep its native height under egui 0.37's interact floor Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: pin the theme's 2/3 point radii; measure Japanese ribbon labels with a Japanese face egui 0.37 rounds widgets 4 points by default, which the theme deliberately does not follow. The ribbon test measured Japanese with missing glyphs, whose width changed in 0.37; with BIZ UDPGothic, 駆動 wraps after its particle like 変換 does. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: click the render inspector's Perspective checkbox by position egui 0.37 orders the accessibility tree differently, so the name found the stage's Perspective segment first. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Translate "Close tab" for the complete catalogs Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Point the focus workarounds at emilk/egui#8763 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Cargo.lock: update only what egui 0.37 needs Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Web: Id::new -> Id::unique for the wasm-only windows Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Command search: keep its hint centred under egui 0.37's interact floor Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * egui 0.37 renames in code main added since the branch Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * egui 0.37 renames in code main added since the last rebase Id::new to Id::unique, ui.id() to ui.scope_id(), WidgetType to Role, the wheel events' source, and the button stroke read from the widget visuals. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Review: disclosures report expanded, late screenshots drained, chat width reset on both sides A disclosure's node says whether it is open as expanded, as egui's own collapsing header does. The screenshot channel is drained every frame, so a shot whose request was cancelled is dropped. Resetting the chat panel's width forgets both sides' state, as before 0.37, and the request stays with its window when tabs switch. Tests main added since the last rebase clear their texture deltas. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 11:35:55 +00:00 · 2026-11-05 11:14:17 +00:00 · 2026-11-05 10:31:50 +00:00 · 2026-11-05 10:31:17 +00:00 · 2026-11-05 10:23:20 +00:00 · 2026-11-05 10:35:00 +00:00
735 changed files with 66731 additions and 9735 deletions
@@ -0,0 +1,20 @@
+# yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json
+reviews:
+  auto_review:
+    # Dependabot bumps are checked by CI; skip CodeRabbit reviews on them.
+    ignore_usernames:
+      - "dependabot[bot]"
+  path_instructions:
+    - path: "**"
+      instructions: |
+        Project rule: don't change anyone's existing defaults unless the change is purely additive and belongs in the application.
+        Flag any change to something a user already relies on: a default setting or preference value, what a command or tool does when used the usual way, the UI's default layout or behaviour, a keyboard or mouse shortcut, or the result an existing saved design rebuilds to.
+        Don't flag purely additive changes: a new command, a new setting whose default keeps today's behaviour, or a new option that appears only when someone chooses it. Don't flag bug fixes that only turn a crash or an error into the result the feature always promised.
+        When you flag one, start the comment with "Changes a default:", say what a user sees before and after, whether a setting keeps the old behaviour, and whether the PR description's `Changes a default:` line says so.
+  pre_merge_checks:
+    custom_checks:
+      - name: "Existing defaults unchanged"
+        mode: "warning"
+        instructions: |
+          Pass if the pull request changes no default a user already relies on (default setting or preference values, what a command or tool does when used the usual way, the UI's default layout or behaviour, shortcuts, or the result an existing saved design rebuilds to), or if its changes are purely additive.
+          Fail otherwise, naming each changed default and what a user sees before and after. Also fail if the description says `Changes a default: no` while the code changes one.
@@ -3,13 +3,13 @@
 SolidCraft is a clean-room, pure-Rust parametric 3D CAD app (sketch solver, feature timeline, B-rep kernel, an egui UI that agents drive). This file is a router: the hard rules, then the skill to read for your task. Humans: CONTRIBUTING.md.

 ## Start here
-Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelled `help wanted`, `good first issue`, `needs-triage`; architecture in `docs/architecture.md`. Act when the code, docs and rules settle a question; ask only when it changes what users see. Local `plan/` notes are optional.
+Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelled `help wanted`, `good first issue`, `needs-triage`; architecture in `docs/architecture.md`. Local `plan/` notes are optional.

 ## Hard rules (what enforces each)
 - Independent: never copy another product's code, icons, text or templates; never drive or take data from commercial CAD. `skills/solidcraft-ground-rules/SKILL.md`.
 - No GPL/LGPL/AGPL code, not even reading it (OpenCASCADE, FreeCAD, SolveSpace, CadQuery, LibreCAD, QCAD): `cargo xtask licences --check`.
 - Every asset is original or openly licensed with a row in ATTRIBUTION.md; read `assets/AGENTS.md` before icon work: `cargo xtask assets`, `cargo xtask icons`.
- Never crash: no unwrap/expect/panic/unsafe in non-test code (unsafe allowlist in crash-safety), errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
+- Never crash: no unwrap/expect/panic/unsafe in non-test code, errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
 - Model decisions (what an operation does, which bodies it touches, which face or edge a point or name means, depths, nearness) use exact geometry; a mesh is for display, export, previews and mesh bodies (`xtask/mesh-decisions.txt` only shrinks): `cargo xtask mesh-decisions`.
 - New kernel cases go to solidcore: `cargo xtask lists`.
 - Everything is a command and programmatic calls never open dialogs: `skills/solidcraft-commands/SKILL.md`.
@@ -21,12 +21,14 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
 - A design-format change is ONE new file in `crates/doc/src/format/pending/`: `scripts/test-format-pending.sh`.
 - A command has input and output schemas (will become required; `schema/unconverted.txt` only shrinks): `skills/solidcraft-commands/SKILL.md`.
 - New UI strings go in `assets/locales/pending/<slug>.json`, ATTRIBUTION rows in `attribution/pending/<slug>.md`: `cargo xtask lists`.
- A changed default keeps the old behaviour behind a preference and fills the PR's `Changes a default:` line, and no second PR for an issue a lower-numbered one closes: `pr-checks.yml`.
+- A changed default keeps the old behaviour behind a preference and fills the PR's `Changes a default:` line: `pr-checks.yml`.
 - A regression test goes in the area's existing test file, never a per-bug file (#3226).
- Look at open PRs first, claim with a draft PR (lowest number wins), one topic per PR, never force-push `main`, no pushes just to catch up with `main`: `skills/solidcraft-contributing/SKILL.md`.
+- Look at open PRs first, claim with a draft PR (lowest number wins), one topic per PR: `skills/solidcraft-contributing/SKILL.md`.
 - A PR's title and first sentence make sense to someone who never saw your chat or the issue: `skills/solidcraft-contributing/SKILL.md`.
+- Code, comments, commit messages and docs are in English, always: `skills/solidcraft-contributing/SKILL.md` ("Working as an agent").
+- Independent work runs in parallel, dependent work stays sequential: `skills/solidcraft-contributing/SKILL.md` ("Working as an agent").
 - Show observable changes with real screenshots or a recording, captured yourself.
- Run `cargo xtask ci` before every commit, without switching branches while it runs. `cargo xtask skills` keeps this file and `skills/` honest.
+- Run `cargo xtask ci` before every commit. `cargo xtask skills` keeps this file and `skills/` honest.

 ## Working on X: read the skill first
 | Working on | Read |
@@ -317,7 +317,6 @@ Editable drawing code, native projects and shipped exports are collected under `
 | assets/icons/ui/design/svg/model/circle_ttt.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/coil.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/colored_components.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
-| assets/icons/ui/design/svg/model/colored_components_off.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/combine.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/model/component.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |

@@ -784,6 +783,51 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
 | `assets/locales/pending/sketch-offset-instances.json` | SolidCraft contributors | Original offset instance-count label and translations | MIT OR Apache-2.0 |
 | assets/icons/ui/design/svg/flat/settings_profile.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original analytic head and shoulder geometry for settings profiles | MIT OR Apache-2.0 |
 | tests/kernel-cases/import/4561-convert-box-mesh-with-a-zero-area-triangle/box-degenerate.stl | SolidCraft contributors | synthetic ASCII STL written by hand: a box with one zero-area triangle, for the kernel regression case of tangency-labs/solidcraft#4561 | MIT OR Apache-2.0 |
+| assets/locales/pending/theme-blur-ui.json | SolidCraft contributors | Original blur controls, notices and translations | MIT OR Apache-2.0 |
+| crates/ui-egui/tests/fixtures/theme-blur.json | SolidCraft contributors | Original theme for blur option scenarios and manager review | MIT OR Apache-2.0 |
+| assets/locales/ka.json | David Machakhelidze (devius) | Original Georgian translation of SolidCraft's English catalog, written with Claude Code from the meaning of each English string; terminology and doubtful strings decided by a native Georgian speaker; no commercial CAD text used | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-mark.svg | SolidCraft contributors | static SolidCraft mark: the five faces and gradients of assets/icons/app/macos/source/SolidCraft.icon/Assets/03-solid-blue-cutout.svg (the final frame of assets/styles/web/loading-logo.svg), cropped to the mark's bounds; original artwork | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-mark-mono-black.svg | SolidCraft contributors | one-colour (black) version of assets/branding/logo/solidcraft-mark.svg, same paths; original artwork | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-mark-mono-white.svg | SolidCraft contributors | one-colour (white) version of assets/branding/logo/solidcraft-mark.svg, same paths; original artwork | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-mark-512.png | SolidCraft contributors | transparent 512 px render of assets/branding/logo/solidcraft-mark.svg (cairosvg); original artwork | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-mark-1024.png | SolidCraft contributors | transparent 1024 px render of assets/branding/logo/solidcraft-mark.svg (cairosvg); original artwork | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-mark-2048.png | SolidCraft contributors | transparent 2048 px render of assets/branding/logo/solidcraft-mark.svg (cairosvg); original artwork | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-wordmark.svg | SolidCraft contributors | the name SolidCraft set like the loading logo's wordmark (bold, +0.02 em tracking, #15499e) in IBM Plex Sans Bold from assets/fonts/ibm-plex-sans (SIL OFL 1.1, IBM Corp.), outlined to paths; no font file is embedded | MIT OR Apache-2.0 |
+| assets/branding/logo/solidcraft-lockup-horizontal.svg | SolidCraft contributors | assets/branding/logo/solidcraft-mark.svg beside assets/branding/logo/solidcraft-wordmark.svg, in the proportions of assets/branding/web/source/og.png; original artwork | MIT OR Apache-2.0 |
+| assets/styles/ui/themes/onyx.json | SolidCraft contributors | original Onyx stone-grey palette, option overlays and semantic icon-role mapping; existing SolidCraft artwork is unchanged | MIT OR Apache-2.0 |
+| docs/book/src/media/ui-tour/window.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (`solidcraft --sample`, default dark theme, software renderer, 1280x800) with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/ui-tour/navigate.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (`--sample`, default dark theme, software renderer) orbiting, panning and zooming, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| assets/locales/pending/sketch-tool-hints.json | carlymx | Original sketch tool hints and engine error translations | MIT OR Apache-2.0 |
+| assets/locales/pending/primitive-pick-field-tips.json | SolidCraft contributors | Original primitive pick-field tooltip translations | MIT OR Apache-2.0 |
+| assets/locales/pending/ribbon-panel-hover.json | SolidCraft contributors | Original ribbon panel menu preference labels and translations | MIT OR Apache-2.0 |
+| docs/screenshots/box-insert-designer.gif | Shawn Marx | original recording made with BoxInsertDesigner's own Motion export (its three.js viewer) of its example game `examples/ccg-example` (https://github.com/ShawnMarx/BoxInsertDesigner): a card game box insert whose trays were built by SolidCraft through `solidcraft-cli`; the published card, board and box art in it is pixelated beyond recognition, and no logos or game names are shown (2.5× playback, 800 px wide) | MIT OR Apache-2.0 |
+| docs/screenshots/box-insert-designer.mp4 | Shawn Marx | original recording made with BoxInsertDesigner's own Motion export (its three.js viewer) of its example game `examples/ccg-example` (https://github.com/ShawnMarx/BoxInsertDesigner): a card game box insert whose trays were built by SolidCraft through `solidcraft-cli`; the published card, board and box art in it is pixelated beyond recognition, and no logos or game names are shown (1280×720) | MIT OR Apache-2.0 |
+| assets/locales/pending/agent-http-consent.json | SolidCraft contributors | Original endpoint-specific HTTP consent messages and translations | MIT OR Apache-2.0 |
+| assets/locales/pending/ground-shadow-placement.json | SolidCraft contributors | Original ground-shadow placement preference messages and translations | MIT OR Apache-2.0 |
+| docs/book/src/media/assemblies/components.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) making components from two original hinge-leaf bodies, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/assemblies/joint.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) creating a revolute joint between two hinge leaves, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/assemblies/drag.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) dragging a jointed hinge leaf, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/assemblies/drive.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) driving a revolute joint between two hinge leaves, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/features/extrude.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) extruding a sketch's profile, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/features/shell.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) shelling a block, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/features/fillet.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) filleting four edges, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/features/edit.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) editing a feature from the timeline, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/features/hole.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) placing a hole, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/features/pattern.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) patterning a hole around an axis, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/parameters/dialog.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (default dark theme, software renderer) showing the Parameters dialog, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/files/menu.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (`--sample`, default dark theme, software renderer) showing the File menu, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/getting-started/start.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (default dark theme, software renderer, 1280x800) showing the start page with its built-in sample thumbnails, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/getting-started/sample.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) opening the built-in Sample Plate from the start page, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sheet-metal/base.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) making a sheet metal base flange, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sheet-metal/flange.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) adding sheet metal edge flanges, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sheet-metal/flat.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) showing a sheet metal flat pattern, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sketching/create.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) starting a sketch on the Top plane, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sketching/draw.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) drawing a rectangle and a circle with typed values, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sketching/dimension.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) dimensioning a sketch until it is fully constrained, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sketching/parts.png | SolidCraft contributors | screenshot of SolidCraft 0.29.0 itself (default dark theme, software renderer, 1280x800) showing a fully constrained sketch, with original numbered callouts (digits set in DejaVu Sans Bold), captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sketching/offset.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) offsetting a sketch outline, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| docs/book/src/media/sketching/trim.mp4 | SolidCraft contributors | original screen recording of the actual SolidCraft 0.29.0 English desktop UI (default dark theme, software renderer) trimming a notch in a sketch, with the original drawn pointer of examples/demo/overlay.py and labels set in DejaVu Sans Bold, captured with examples/demo/doc_shots.py | MIT OR Apache-2.0 |
+| assets/locales/ca.json | carlymx | Catalan translation of the English catalog, contributed upstream | MIT OR Apache-2.0 |

 ## Code adapted from sibling projects

@@ -835,7 +879,7 @@ into THIRD-PARTY-LICENSES.txt when `main` regenerates it.
 ## FreeCAD and Rhino import library

 FreeCAD `.FCStd` and Rhino `.3dm` files are read with [cadmpeg](https://github.com/cadmpeg/cadmpeg)
-0.6.3 (Apache-2.0), linked as the crates `cadmpeg-core`, `cadmpeg-ir`, `cadmpeg-registry`,
+0.6.7 (Apache-2.0), linked as the crates `cadmpeg-core`, `cadmpeg-ir`, `cadmpeg-registry`,
 `cadmpeg-container`, `cadmpeg-codec-freecad`, `cadmpeg-codec-rhino` and `cadmpeg-codec-step`
 in native and browser builds (`crates/io/src/native_cad.rs`). Only those open-format codecs are built: no
 default features, so cadmpeg's codecs for commercial CAD formats and its ShapeManager/ACIS
@@ -853,11 +897,10 @@ copied into SolidCraft.

 | Directory | Source | Licence | Changes |
 |---|---|---|---|
-| vendor/accesskit_macos | accesskit_macos 0.26.3, https://github.com/AccessKit/accesskit (The AccessKit contributors) | MIT OR Apache-2.0 | the subclassing adapter and its tests from 0.27.2: dropping the adapter keeps AppKit's key-value observers (vendor/README.md) |

 ## Vendored renderer compatibility fix

-`vendor/egui-wgpu` is egui-wgpu 0.36.2 from https://github.com/emilk/egui
+`vendor/egui-wgpu` is egui-wgpu 0.37.0 from https://github.com/emilk/egui
 (MIT OR Apache-2.0; both original licence texts are included). Rust sources and
 its original `egui.wgsl` shader are retained; no images or other artwork are copied.
 SolidCraft's narrow patch selects a safe 1x MSAA path on the chosen OpenGL adapter
@@ -88,6 +88,8 @@ The [architecture page](docs/architecture.md) has the layer table. The short ver

 - `crates/geom`: vectors, planes, meshes, measures.
 - `crates/sketch`: our own constraint solver, plus profile finding.
+- `crates/dynamics`: multibody dynamics: rigid bodies, joint constraints, gravity and springs,
+  integrated in time (RFC #9719). It depends only on `geom`.
 - `crates/kernel`: the B-rep kernel boundary. It wraps [truck](https://github.com/ricosjp/truck),
  and it's the only crate allowed to touch truck. Fillets, chamfers, shell/offset, Delete Face,
  Split Face, STEP/IGES read and write, and face provenance are our own code here. Patched
@@ -472,6 +474,16 @@ the same area), first resolve the command registry and source conflicts, then ru
 The generator tests cover stable ordering and additions that leave existing lines
 unchanged. The initial switch to sorted rows is a one-time larger diff.

+## Pictures in the user guide
+
+The user guide's screenshots and short clips (`docs/book/src/media/`) are captured from the real
+app by `examples/demo/doc_shots.py`, one function per figure. Each run starts a fresh app with its
+own settings, so your preferences never show. When a change makes a figure out of date, run
+`python3 examples/demo/doc_shots.py <page or shot>` (it needs Xvfb, ffmpeg, Pillow and a release
+build) and commit the new file. A new figure is a new function there, an ATTRIBUTION row in
+`attribution/pending/`, and a `<video>` (clips) or image link on the page. Keep a still under
+about 250 KB and a clip under about 1 MB.
+
 ## Licence

 By contributing you agree that your contribution is licensed as MIT OR Apache-2.0, like the rest
@@ -4,9 +4,9 @@ version = 4

 [[package]]
 name = "accesskit"
-version = "0.24.1"
+version = "0.25.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d3b7f7f85a7e5f68090000ed7622545829afd484d210358702ae4cb97dd0c320"
+checksum = "4e883d1d28c5fd5568c79ed2d2bd48d9f2fd3945c8974ed0f53690ceddb051be"
 dependencies = [
 "enumn",
 "serde",
@@ -15,12 +15,12 @@ dependencies = [

 [[package]]
 name = "accesskit_atspi_common"
-version = "0.18.1"
+version = "0.21.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1e8c61bee90b42a772d39d06a740207dc71a4e780004ace1db8d99fb1baaa954"
+checksum = "24f5baf62e34a4a6c30e3d697e4782f821a7337049c44c3b40576a27dfbb580d"
 dependencies = [
 "accesskit",
- "accesskit_consumer 0.36.0",
+ "accesskit_consumer",
 "atspi-common",
 "phf",
 "serde",
@@ -29,41 +29,37 @@ dependencies = [

 [[package]]
 name = "accesskit_consumer"
-version = "0.35.0"
+version = "0.39.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "53cf47daed85312e763fbf85ceca136e0d7abc68e0a7e12abe11f48172bc3b10"
+checksum = "f3da8f27636015191b2264ee1df681503170a632cafd832fdc1edfdd4e3a2fd3"
 dependencies = [
 "accesskit",
- "hashbrown 0.16.1",
+ "hashbrown 0.17.1",
 ]

 [[package]]
-name = "accesskit_consumer"
-version = "0.36.0"
+name = "accesskit_ios"
+version = "0.2.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "25e0d7e25d06f4dc21d1774d67146e9e80d6789216cbd4d1e88185b0095dba60"
+checksum = "a5280724673bbfa8b30a838c013500b719392989be3b97c5a9964062c252c232"
 dependencies = [
 "accesskit",
- "hashbrown 0.16.1",
-]
-
-[[package]]
-name = "accesskit_consumer"
-version = "0.38.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5d10a236f96f87d70732e44520046785431ef01d5bcd6b041317bfadd2f88245"
-dependencies = [
- "accesskit",
- "hashbrown 0.16.1",
+ "accesskit_consumer",
+ "hashbrown 0.17.1",
+ "objc2 0.5.3",
+ "objc2-foundation 0.2.2",
+ "objc2-ui-kit 0.2.2",
 ]

 [[package]]
 name = "accesskit_macos"
-version = "0.26.3"
+version = "0.27.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "123828ceeec755b05255e3976cb0852993202de98a0626c97dd8d34246991f84"
 dependencies = [
 "accesskit",
- "accesskit_consumer 0.38.0",
- "hashbrown 0.16.1",
+ "accesskit_consumer",
+ "hashbrown 0.17.1",
 "objc2 0.5.3",
 "objc2-app-kit 0.2.2",
 "objc2-foundation 0.2.2",
@@ -71,9 +67,9 @@ dependencies = [

 [[package]]
 name = "accesskit_unix"
-version = "0.21.1"
+version = "0.24.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b016ca8db0ea0ea2ceff29a9d6240391492d960716aa471967c00e8cc8cb197c"
+checksum = "30d5192871228c54f1b0fb4a85cef000e11a3804f25d2165f14afa0daa67f3f6"
 dependencies = [
 "accesskit",
 "accesskit_atspi_common",
@@ -89,13 +85,13 @@ dependencies = [

 [[package]]
 name = "accesskit_windows"
-version = "0.32.1"
+version = "0.35.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "eff7009f1a532e917d66970a1e80c965140c6cfbbabbdde3d64e5431e6c78e21"
+checksum = "498668b90da9995302a0055aaecad4756932333da2ddef6baee1c00844c430fc"
 dependencies = [
 "accesskit",
- "accesskit_consumer 0.35.0",
- "hashbrown 0.16.1",
+ "accesskit_consumer",
+ "hashbrown 0.17.1",
 "static_assertions",
 "windows",
 "windows-core",
@@ -103,11 +99,12 @@ dependencies = [

 [[package]]
 name = "accesskit_winit"
-version = "0.32.2"
+version = "0.34.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1fe9a94394896352cc4660ca2288bd4ef883d83238853c038b44070c8f134313"
+checksum = "cd4ab4437b520ff03088fbe48676a11e7d44a929535e64b31432c1073e48dbcc"
 dependencies = [
 "accesskit",
+ "accesskit_ios",
 "accesskit_macos",
 "accesskit_unix",
 "accesskit_windows",
@@ -203,6 +200,7 @@ dependencies = [
 "parking_lot",
 "percent-encoding",
 "windows-sys 0.60.2",
+ "wl-clipboard-rs",
 "x11rb",
 ]

@@ -564,9 +562,9 @@ checksum = "fc652a48c352aef3ea3aed32080501cf3ef6ed5da78602a020c991775b0aff04"

 [[package]]
 name = "cadmpeg-codec-freecad"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3c4a8fa61748cbb3ce80838b00a8cebfe553460583941f5aba6e2b97c16b4d37"
+checksum = "6fe0ed1935ace2c203b87107a064818dec2bb2ec2f250c4ad121767f3da75d1b"
 dependencies = [
 "cadmpeg-container",
 "cadmpeg-core",
@@ -580,9 +578,9 @@ dependencies = [

 [[package]]
 name = "cadmpeg-codec-rhino"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d7af41440d4c1d69e88e612de02cc3c9bad79d03429531e640ac924fef53c6bf"
+checksum = "7dd2b76bd1d9301c949fbd731fd22cff9d37d10d1f481c754b557c2187bd0171"
 dependencies = [
 "cadmpeg-container",
 "cadmpeg-core",
@@ -599,9 +597,9 @@ dependencies = [

 [[package]]
 name = "cadmpeg-codec-step"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "35e1b6d17cf26b31f59f2edab8ef5c29d2a33216c581fd913f012ad4869bd559"
+checksum = "f3cbce33ed681a28b62d8b01ae64cca2b01f11f31b9a3e5e2455b9ffde915712"
 dependencies = [
 "base64",
 "cadmpeg-container",
@@ -616,9 +614,9 @@ dependencies = [

 [[package]]
 name = "cadmpeg-container"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5ab7bcef48ac7480b4917820272d85cd2c9533e17904e15b0e4d22f19a6045bd"
+checksum = "03f0d1c22b875294c5fbf4a4738aec8f8c0a4ad035eb28ece404f1dec21f371a"
 dependencies = [
 "cadmpeg-core",
 "crc32fast",
@@ -628,9 +626,9 @@ dependencies = [

 [[package]]
 name = "cadmpeg-core"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e86bb7a40521832504bb1f5953a1c706b2c52aad73bf6d84e1b35e5cb0beae3f"
+checksum = "795bdc6e2a10ecc0627138874c17e2948a3925cd22c6c6b0c2e4f6621d92f89c"
 dependencies = [
 "flate2",
 "memchr",
@@ -643,9 +641,9 @@ dependencies = [

 [[package]]
 name = "cadmpeg-ir"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b570a1a8c579e407a9fd7bb10fa1900f8827f1d578b8fcb4ea2a056b5f323c72"
+checksum = "5592036516aaf2574b159a86a3d1ae872dc245261de86e4c0ce6773fed00a249"
 dependencies = [
 "base64",
 "cadmpeg-core",
@@ -658,9 +656,9 @@ dependencies = [

 [[package]]
 name = "cadmpeg-registry"
-version = "0.6.3"
+version = "0.6.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b2be23469a9bca0b684f1811118fffb581ebd32ded08e6cc8b0716a41f8c1377"
+checksum = "fc163233d5f664337267192848505854de6aeed4843181adf87f58baddcee9a0"
 dependencies = [
 "cadmpeg-codec-freecad",
 "cadmpeg-codec-rhino",
@@ -687,42 +685,18 @@ dependencies = [
 "thiserror 1.0.69",
 ]

-[[package]]
-name = "calloop"
-version = "0.14.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "43b32313e937c8721c9d17ee9bf60699a6402b4b7c2cb6ac1bee0ffcaa4b4e5e"
-dependencies = [
- "bitflags 2.13.2",
- "polling",
- "rustix 1.1.5",
- "tracing",
-]
-
 [[package]]
 name = "calloop-wayland-source"
 version = "0.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "95a66a987056935f7efce4ab5668920b5d0dac4a7c99991a67395f13702ddd20"
 dependencies = [
- "calloop 0.13.0",
+ "calloop",
 "rustix 0.38.44",
 "wayland-backend",
 "wayland-client",
 ]

-[[package]]
-name = "calloop-wayland-source"
-version = "0.4.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "138efcf0940a02ebf0cc8d1eff41a1682a46b431630f4c52450d6265876021fa"
-dependencies = [
- "calloop 0.14.5",
- "rustix 1.1.5",
- "wayland-backend",
- "wayland-client",
-]
-
 [[package]]
 name = "cbc"
 version = "0.1.2"
@@ -1123,9 +1097,9 @@ checksum = "d0881ea181b1df73ff77ffaaf9c7544ecc11e82fba9b5f27b262a3c73a332555"

 [[package]]
 name = "ecolor"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0656a7530b9e2841ee7a5f983965bdd9840c32f4012f759cfd44b912cced6b34"
+checksum = "31bcbef0d4263a63eb32c4834e5d711613035ce1333468e107d928923e21e6e2"
 dependencies = [
 "bytemuck",
 "emath",
@@ -1134,9 +1108,9 @@ dependencies = [

 [[package]]
 name = "eframe"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "55ad41fac6e3149abb4866e93df37dbd33baa95db525c3368c944584e95a5dc2"
+checksum = "9c5642501a65ca657d05f00c643a5c14ff2346cb3818032bfe23d58e1f8e5f84"
 dependencies = [
 "ahash",
 "bytemuck",
@@ -1159,6 +1133,7 @@ dependencies = [
 "profiling",
 "raw-window-handle",
 "ron",
+ "send_wrapper",
 "serde",
 "static_assertions",
 "wasm-bindgen",
@@ -1171,9 +1146,9 @@ dependencies = [

 [[package]]
 name = "egui"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dc938cc27cd911415e1e4d151bc56ff9df063d8db081374e87aeb805ea74b2ba"
+checksum = "bec9144f49b7a28b5f395d3147e325b4fe3e77ba686eac11d1bdf0a7da3f375f"
 dependencies = [
 "accesskit",
 "ahash",
@@ -1193,7 +1168,7 @@ dependencies = [

 [[package]]
 name = "egui-wgpu"
-version = "0.36.2"
+version = "0.37.0"
 dependencies = [
 "ahash",
 "bytemuck",
@@ -1211,32 +1186,34 @@ dependencies = [

 [[package]]
 name = "egui-winit"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "98466000559d66ba4db786a30448b01483946add4188e7f10f522a27b4fb89cc"
+checksum = "e4e449f4c4a2a60c7ccb4ba7fa4078417bfe1f9ddc03b5e05ce75748e33a70de"
 dependencies = [
 "accesskit_winit",
 "arboard",
+ "block2 0.6.2",
 "bytemuck",
 "egui",
 "log",
 "objc2 0.6.5",
+ "objc2-app-kit 0.3.2",
 "objc2-foundation 0.3.2",
 "objc2-ui-kit 0.3.2",
 "profiling",
 "raw-window-handle",
 "serde",
- "smithay-clipboard",
 "web-time",
 "webbrowser",
+ "windows-sys 0.61.2",
 "winit",
 ]

 [[package]]
 name = "egui_glow"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "606ed4167daf341e5753d703285c4c1d562324b2c07aa8f405cd7d066fe58f3b"
+checksum = "9275ca5cc35a6b7c94e0e8cedf22542f66cb0cf45ed8ab2657c78ff49fec7268"
 dependencies = [
 "bytemuck",
 "egui",
@@ -1254,9 +1231,9 @@ checksum = "0e9c71c2167ca323c882b99918929403426e2373ea17242ff5653e0d5e1058be"

 [[package]]
 name = "emath"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "52c8d4141cf0f60fb2f7aefaf352d3ffa5171ef0ab09731c64391801e95e48f1"
+checksum = "e73ce90f54750be8672c02be0743fe47530e6f251e066f0ee2869b59eb297af5"
 dependencies = [
 "bytemuck",
 "serde",
@@ -1330,9 +1307,9 @@ dependencies = [

 [[package]]
 name = "epaint"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a0ec0308dc23130fc1a7d4623a8534c2ed069c6dc84e258ee4f3de99615aa1a3"
+checksum = "97bac86ae3dde93fc3951e790951caea739ff39a6c89d909cdaf1d9278dbb1bd"
 dependencies = [
 "ahash",
 "bytemuck",
@@ -1350,15 +1327,16 @@ dependencies = [
 "skrifa",
 "smallvec",
 "unicode-general-category",
+ "unicode-properties",
 "unicode-segmentation",
 "vello_cpu",
 ]

 [[package]]
 name = "epaint_default_fonts"
-version = "0.36.2"
+version = "0.37.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "773fa9c96dd0dbef887e39d0ed6177f141cce4d68e6041df77570aa3702dfa13"
+checksum = "cfc1cc505827f4c23eedc297975a0fd038268d41293f389dd8ff3b574aefab19"

 [[package]]
 name = "equivalent"
@@ -1444,6 +1422,12 @@ version = "0.1.14"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "aedcfb3409746eddb02b9e19ebda1c3394f759a152e48ee875a0844d1b955484"

+[[package]]
+name = "fixedbitset"
+version = "0.5.7"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1d674e81391d1e1ab681a28d99df07927c6d4aa5b027d7da16ba32d1d21ecd99"
+
 [[package]]
 name = "flate2"
 version = "1.1.10"
@@ -1455,6 +1439,12 @@ dependencies = [
 "zlib-rs",
 ]

+[[package]]
+name = "foldhash"
+version = "0.1.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d9c4f5dac5e15c24eb999c26181a6ca40b39fe946cbe4c263c7209467bc83af2"
+
 [[package]]
 name = "foldhash"
 version = "0.2.0"
@@ -1651,12 +1641,12 @@ dependencies = [

 [[package]]
 name = "glifo"
-version = "0.2.0"
+version = "0.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ed4a1bb24121291d27230c1b1b44e07d6a9b28cefdb32fe1581dfb84e14f940a"
+checksum = "282a26c1e23de04bdab3e34a21b6f877a479b96737792516b9b8b8f69b6661be"
 dependencies = [
 "bytemuck",
- "foldhash",
+ "foldhash 0.2.0",
 "hashbrown 0.17.1",
 "log",
 "peniko",
@@ -1826,6 +1816,15 @@ dependencies = [
 "smallvec",
 ]

+[[package]]
+name = "hashbrown"
+version = "0.15.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9229cfe53dfd69f0609a49f65461bd93001ea1ef889cd5529dd176593f5338a1"
+dependencies = [
+ "foldhash 0.1.5",
+]
+
 [[package]]
 name = "hashbrown"
 version = "0.16.1"
@@ -1834,7 +1833,7 @@ checksum = "841d1cc9bed7f9236f321df977030373f4a4163ae1a7dbfe1a51a2c1a51d9100"
 dependencies = [
 "allocator-api2",
 "equivalent",
- "foldhash",
+ "foldhash 0.2.0",
 ]

 [[package]]
@@ -1843,7 +1842,7 @@ version = "0.17.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "ed5909b6e89a2db4456e54cd5f673791d7eca6732202bbf2a9cc504fe2f9b84a"
 dependencies = [
- "foldhash",
+ "foldhash 0.2.0",
 ]

 [[package]]
@@ -2500,6 +2499,15 @@ version = "0.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "2bf50223579dc7cdcfb3bfcacf7069ff68243f8c363f62ffa99cf000a6b9c451"

+[[package]]
+name = "nom"
+version = "8.0.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "df9761775871bdef83bee530e60050f7e54b1105350d6884eb0fb4f46c2f9405"
+dependencies = [
+ "memchr",
+]
+
 [[package]]
 name = "num"
 version = "0.4.3"
@@ -2956,6 +2964,16 @@ dependencies = [
 "pin-project-lite",
 ]

+[[package]]
+name = "os_pipe"
+version = "1.2.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7d8fae84b431384b68627d0f9b3b1245fcf9f46f6c0e3dc902e9dce64edd1967"
+dependencies = [
+ "libc",
+ "windows-sys 0.61.2",
+]
+
 [[package]]
 name = "parking"
 version = "2.2.1"
@@ -3005,10 +3023,21 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9b4f627cb1b25917193a259e49bdad08f671f8d9708acfd5fe0a8c1455d87220"

 [[package]]
-name = "phf"
-version = "0.13.1"
+name = "petgraph"
+version = "0.8.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c1562dc717473dbaa4c1f85a36410e03c047b2e7df7f45ee938fbef64ae7fadf"
+checksum = "8701b58ea97060d5e5b155d383a69952a60943f0e6dfe30b04c287beb0b27455"
+dependencies = [
+ "fixedbitset",
+ "hashbrown 0.15.5",
+ "indexmap",
+]
+
+[[package]]
+name = "phf"
+version = "0.14.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "010378780309880b08997fae13be7834dba947d36393bd372f2b1556deb2a2f6"
 dependencies = [
 "phf_macros",
 "phf_shared",
@@ -3017,9 +3046,9 @@ dependencies = [

 [[package]]
 name = "phf_generator"
-version = "0.13.1"
+version = "0.14.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "135ace3a761e564ec88c03a77317a7c6b80bb7f7135ef2544dbe054243b89737"
+checksum = "aeb62e0959d5a1bebc965f4d15d9e2b7cea002b6b0f5ba8cde6cc26738467100"
 dependencies = [
 "fastrand",
 "phf_shared",
@@ -3027,9 +3056,9 @@ dependencies = [

 [[package]]
 name = "phf_macros"
-version = "0.13.1"
+version = "0.14.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "812f032b54b1e759ccd5f8b6677695d5268c588701effba24601f6932f8269ef"
+checksum = "5fa8d0ca26d424d27630da600c6624696e7dec8bf7b3b492b383c5dc49e5e085"
 dependencies = [
 "phf_generator",
 "phf_shared",
@@ -3040,9 +3069,9 @@ dependencies = [

 [[package]]
 name = "phf_shared"
-version = "0.13.1"
+version = "0.14.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e57fef6bc5981e38c2ce2d63bfa546861309f875b8a75f092d1d54ae2d64f266"
+checksum = "c6fd9027e2d9319be6349febd1db4e8d02aa544921200c9b777720ac34a3aa89"
 dependencies = [
 "siphasher",
 ]
@@ -3762,6 +3791,12 @@ version = "1.0.28"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "8a7852d02fc848982e0c167ef163aaff9cd91dc640ba85e263cb1ce46fae51cd"

+[[package]]
+name = "send_wrapper"
+version = "0.6.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "cd0b0ec5f1c1ca621c432a25813d8d60c88abe6d3e08a3eb9cf37d97a0fe3d73"
+
 [[package]]
 name = "serde"
 version = "1.0.229"
@@ -3986,8 +4021,8 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3457dea1f0eb631b4034d61d4d8c32074caa6cd1ab2d59f2327bd8461e2c0016"
 dependencies = [
 "bitflags 2.13.2",
- "calloop 0.13.0",
- "calloop-wayland-source 0.3.0",
+ "calloop",
+ "calloop-wayland-source",
 "cursor-icon",
 "libc",
 "log",
@@ -4004,44 +4039,6 @@ dependencies = [
 "xkeysym",
 ]

-[[package]]
-name = "smithay-client-toolkit"
-version = "0.20.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0512da38f5e2b31201a93524adb8d3136276fa4fe4aafab4e1f727a82b534cc0"
-dependencies = [
- "bitflags 2.13.2",
- "calloop 0.14.5",
- "calloop-wayland-source 0.4.1",
- "cursor-icon",
- "libc",
- "log",
- "memmap2",
- "rustix 1.1.5",
- "thiserror 2.0.21",
- "wayland-backend",
- "wayland-client",
- "wayland-csd-frame",
- "wayland-cursor",
- "wayland-protocols",
- "wayland-protocols-experimental",
- "wayland-protocols-misc",
- "wayland-protocols-wlr",
- "wayland-scanner",
- "xkeysym",
-]
-
-[[package]]
-name = "smithay-clipboard"
-version = "0.7.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "71704c03f739f7745053bde45fa203a46c58d25bc5c4efba1d9a60e9dba81226"
-dependencies = [
- "libc",
- "smithay-client-toolkit 0.20.0",
- "wayland-backend",
-]
-
 [[package]]
 name = "smol_str"
 version = "0.2.2"
@@ -4102,6 +4099,7 @@ dependencies = [
 "ureq",
 "windows-sys 0.61.2",
 "winit",
+ "winreg",
 "x11rb",
 "zbus 5.19.0",
 ]
@@ -4152,6 +4150,17 @@ dependencies = [
 "web-time",
 ]

+[[package]]
+name = "solidcraft-dynamics"
+version = "0.40.0-rc.2"
+dependencies = [
+ "serde",
+ "serde_json",
+ "solidcore-record",
+ "solidcraft-geom",
+ "thiserror 2.0.21",
+]
+
 [[package]]
 name = "solidcraft-engine"
 version = "0.40.0-rc.2"
@@ -4651,7 +4660,6 @@ version = "0.1.44"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "63e71662fa4b2a2c3a26f570f037eb95bb1f85397f3cd8076caed2f026a6d100"
 dependencies = [
- "log",
 "pin-project-lite",
 "tracing-attributes",
 "tracing-core",
@@ -4677,6 +4685,17 @@ dependencies = [
 "once_cell",
 ]

+[[package]]
+name = "tree_magic_mini"
+version = "3.2.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b8765b90061cba6c22b5831f675da109ae5561588290f9fa2317adab2714d5a6"
+dependencies = [
+ "memchr",
+ "nom",
+ "petgraph",
+]
+
 [[package]]
 name = "ttf-parser"
 version = "0.25.1"
@@ -4751,6 +4770,12 @@ version = "1.0.26"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "d245f478577f809a851594d02313b640fb437e0bb33866753cff937863096954"

+[[package]]
+name = "unicode-properties"
+version = "0.1.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "993ad287eb20e8ba755312801cfe1413e0f25d604075863acaddca10b04c1833"
+
 [[package]]
 name = "unicode-segmentation"
 version = "1.13.3"
@@ -4834,9 +4859,9 @@ dependencies = [

 [[package]]
 name = "vello_common"
-version = "0.1.0"
+version = "0.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b2e9aed918117e8152c9eddfd8362d73c465c23f26c44786aa331707b8a64fa2"
+checksum = "bbb2141a2bca6e6d598e471fd4d1d7eed8e020aad6a28187edda07f091a325dd"
 dependencies = [
 "bytemuck",
 "fearless_simd",
@@ -4849,9 +4874,9 @@ dependencies = [

 [[package]]
 name = "vello_cpu"
-version = "0.1.0"
+version = "0.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ac7349e1f55f6b801c7c277958df4ea53e7f20f21e8014910ad888b2ecda93ea"
+checksum = "ace506ca414548966fcf3c283be94eb1cad8254de488791ee698bf438b0890a9"
 dependencies = [
 "bytemuck",
 "glifo",
@@ -5026,32 +5051,6 @@ dependencies = [
 "wayland-scanner",
 ]

-[[package]]
-name = "wayland-protocols-experimental"
-version = "20250721.0.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "40a1f863128dcaaec790d7b4b396cc9b9a7a079e878e18c47e6c2d2c5a8dcbb1"
-dependencies = [
- "bitflags 2.13.2",
- "wayland-backend",
- "wayland-client",
- "wayland-protocols",
- "wayland-scanner",
-]
-
-[[package]]
-name = "wayland-protocols-misc"
-version = "0.3.12"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6e9567599ef23e09b8dad6e429e5738d4509dfc46b3b21f32841a304d16b29c8"
-dependencies = [
- "bitflags 2.13.2",
- "wayland-backend",
- "wayland-client",
- "wayland-protocols",
- "wayland-scanner",
-]
-
 [[package]]
 name = "wayland-protocols-plasma"
 version = "0.3.12"
@@ -5629,7 +5628,7 @@ dependencies = [
 "bitflags 2.13.2",
 "block2 0.5.1",
 "bytemuck",
- "calloop 0.13.0",
+ "calloop",
 "cfg_aliases",
 "concurrent-queue",
 "core-foundation 0.9.4",
@@ -5650,7 +5649,7 @@ dependencies = [
 "raw-window-handle",
 "redox_syscall 0.4.1",
 "rustix 0.38.44",
- "smithay-client-toolkit 0.19.2",
+ "smithay-client-toolkit",
 "smol_str",
 "tracing",
 "unicode-segmentation",
@@ -5693,6 +5692,24 @@ version = "0.57.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "1ebf944e87a7c253233ad6766e082e3cd714b5d03812acc24c318f549614536e"

+[[package]]
+name = "wl-clipboard-rs"
+version = "0.9.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "959c7ac3b8afde864f7a7448ac16f29b2b83350b7eccbf77fb781c3999aa6848"
+dependencies = [
+ "libc",
+ "log",
+ "os_pipe",
+ "rustix 1.1.5",
+ "thiserror 2.0.21",
+ "tree_magic_mini",
+ "wayland-backend",
+ "wayland-client",
+ "wayland-protocols",
+ "wayland-protocols-wlr",
+]
+
 [[package]]
 name = "writeable"
 version = "0.6.4"
@@ -22,6 +22,7 @@ solidcraft-kernel = { path = "crates/kernel" }
 solidcraft-smlib = { path = "crates/smlib" }
 solidcraft-step = { path = "crates/step" }
 solidcraft-render = { path = "crates/render" }
+solidcraft-dynamics = { path = "crates/dynamics" }
 solidcraft-gpu = { path = "crates/gpu" }
 solidcraft-doc = { path = "crates/doc" }
 solidcraft-io = { path = "crates/io" }
@@ -81,9 +82,9 @@ gethostname = "1"
 # Pinned: its IR and codec APIs change between minor versions. Open formats only: no default
 # features, so cadmpeg's codecs for commercial formats (f3d, sldprt, inventor, catia, creo, nx)
 # and its ShapeManager/ACIS `sat` codec are not compiled in. `step` is the writer we restate through.
-cadmpeg-core = "=0.6.3"
-cadmpeg-ir = "=0.6.3"
-cadmpeg-registry = { version = "=0.6.3", default-features = false, features = ["fcstd", "rhino", "step"] }
+cadmpeg-core = "=0.6.7"
+cadmpeg-ir = "=0.6.7"
+cadmpeg-registry = { version = "=0.6.7", default-features = false, features = ["fcstd", "rhino", "step"] }

 # fonts (sketch text outlines; MIT OR Apache-2.0, pure Rust)
 ttf-parser = { version = "0.25", default-features = false, features = ["std", "variable-fonts"] }
@@ -102,11 +103,12 @@ tiny-skia = { version = "0.12", default-features = false, features = ["std", "si
 toml = "1"

 # ui
-egui = "0.36"
-eframe = { version = "0.36", default-features = false, features = ["persistence"] }
+# default_fonts: the built-in Hack is the UI's symbol fallback (#2955); 0.37 no longer turns it on.
+egui = { version = "0.37", features = ["default_fonts"] }
+eframe = { version = "0.37", default-features = false, features = ["persistence"] }
 # Instant/SystemTime that also work in the browser (std panics on wasm32-unknown-unknown).
 web-time = "1"
-egui-wgpu = "0.36"
+egui-wgpu = "0.37"
 # the wgpu egui-wgpu uses, for compute (crates/gpu); backends come from the apps' features
 wgpu = { version = "30", default-features = false, features = ["std", "wgsl"] }
 naga = { version = "30", default-features = false }
@@ -161,12 +163,9 @@ debug = "line-tables-only"
 egui-wgpu = { path = "vendor/egui-wgpu" }

 # Deliver trackpad pinch and rotation gestures on Wayland (zwp_pointer_gestures_v1), which
-# winit 0.30 never binds and eframe 0.36 still requires winit 0.30.
+# winit 0.30 never binds and eframe 0.37 still requires winit 0.30.
 winit = { path = "vendor/winit" }

-# macOS: dropping the accessibility adapter leaves AppKit's key-value observers intact (#7535).
-accesskit_macos = { path = "vendor/accesskit_macos" }
-
 # Mutation testing (cargo-mutants, docs/mutation-testing.md): the ci profile with incremental
 # builds, since every mutant rebuilds the crates above the one it changes.
 [profile.mutants]
@@ -225,6 +225,12 @@ completed drawings publish atomically. The browser still exports synchronously.

 ## Render foundation

+- Wood surface images (#1345): native CPU and GPU opaque rendering share physical
+  repeat frames and filtered mip chains. Imported maps retain exact bytes and
+  declared provenance in the design, reopen offline, and expose grain-angle
+  controls. Scalar face appearances suppress body maps. Planar projection and
+  CPU encoding/optical limits remain explicit; see [portable surfaces](docs/render-portable-surfaces-and-stages.md).
+
 - Original starter appearances (#1722): 34 opaque recipes through existing commands, with six explicitly unavailable glass recipes and preserved legacy looks; see [the contract](docs/render-starter-appearances.md).

 - Bounded linear film accumulation (#1696) supplies caller-admitted mean/variance storage and complete-pass views; actual progressive consumers remain separate. See [the film contract](docs/render-film.md).
@@ -1,18 +1,17 @@
 Third-party software in SolidCraft

-SolidCraft (the desktop app, solidcraft-cli and the web app) is built from the 537 crates below.
+SolidCraft (the desktop app, solidcraft-cli and the web app) is built from the 540 crates below.
 Generated by `cargo xtask licences` from Cargo.lock and the crates' own licence files.
 SolidCraft's own licence is in LICENSE-MIT and LICENSE-APACHE, and NOTICE.

-accesskit 0.24.1  (MIT OR Apache-2.0)
-accesskit_atspi_common 0.18.1  (MIT OR Apache-2.0)
-accesskit_consumer 0.35.0  (MIT OR Apache-2.0)
-accesskit_consumer 0.36.0  (MIT OR Apache-2.0)
-accesskit_consumer 0.38.0  (MIT OR Apache-2.0)
-accesskit_macos 0.26.3  (MIT OR Apache-2.0)
-accesskit_unix 0.21.1  (MIT OR Apache-2.0)
-accesskit_windows 0.32.1  (MIT OR Apache-2.0)
-accesskit_winit 0.32.2  (Apache-2.0)
+accesskit 0.25.2  (MIT OR Apache-2.0)
+accesskit_atspi_common 0.21.1  (MIT OR Apache-2.0)
+accesskit_consumer 0.39.2  (MIT OR Apache-2.0)
+accesskit_ios 0.2.2  (MIT OR Apache-2.0)
+accesskit_macos 0.27.2  (MIT OR Apache-2.0)
+accesskit_unix 0.24.1  (MIT OR Apache-2.0)
+accesskit_windows 0.35.2  (MIT OR Apache-2.0)
+accesskit_winit 0.34.2  (Apache-2.0)
 adler2 2.0.1  (0BSD OR MIT OR Apache-2.0)
 aes 0.8.4  (MIT OR Apache-2.0)
 ahash 0.8.12  (MIT OR Apache-2.0)
@@ -57,17 +56,15 @@ bytemuck_derive 1.12.1  (Zlib OR Apache-2.0 OR MIT)
 byteorder 1.5.0  (Unlicense OR MIT)
 byteorder-lite 0.1.0  (Unlicense OR MIT)
 bytes 1.12.1  (MIT)
-cadmpeg-codec-freecad 0.6.3  (Apache-2.0)
-cadmpeg-codec-rhino 0.6.3  (Apache-2.0)
-cadmpeg-codec-step 0.6.3  (Apache-2.0)
-cadmpeg-container 0.6.3  (Apache-2.0)
-cadmpeg-core 0.6.3  (Apache-2.0)
-cadmpeg-ir 0.6.3  (Apache-2.0)
-cadmpeg-registry 0.6.3  (Apache-2.0)
+cadmpeg-codec-freecad 0.6.7  (Apache-2.0)
+cadmpeg-codec-rhino 0.6.7  (Apache-2.0)
+cadmpeg-codec-step 0.6.7  (Apache-2.0)
+cadmpeg-container 0.6.7  (Apache-2.0)
+cadmpeg-core 0.6.7  (Apache-2.0)
+cadmpeg-ir 0.6.7  (Apache-2.0)
+cadmpeg-registry 0.6.7  (Apache-2.0)
 calloop 0.13.0  (MIT)
-calloop 0.14.5  (MIT)
 calloop-wayland-source 0.3.0  (MIT)
-calloop-wayland-source 0.4.1  (MIT)
 cbc 0.1.2  (MIT OR Apache-2.0)
 cfg-if 1.0.5  (MIT OR Apache-2.0)
 cgl 0.3.2  (MIT / Apache-2.0)
@@ -109,21 +106,21 @@ document-features 0.2.12  (MIT OR Apache-2.0)
 downcast-rs 1.2.1  (MIT/Apache-2.0)
 dpi 0.1.2  (Apache-2.0 AND MIT)
 dyn-clone 1.0.20  (MIT OR Apache-2.0)
-ecolor 0.36.2  (MIT OR Apache-2.0)
-eframe 0.36.2  (MIT OR Apache-2.0)
-egui 0.36.2  (MIT OR Apache-2.0)
-egui-wgpu 0.36.2  (MIT OR Apache-2.0)
-egui-winit 0.36.2  (MIT OR Apache-2.0)
-egui_glow 0.36.2  (MIT OR Apache-2.0)
+ecolor 0.37.0  (MIT OR Apache-2.0)
+eframe 0.37.0  (MIT OR Apache-2.0)
+egui 0.37.0  (MIT OR Apache-2.0)
+egui-wgpu 0.37.0  (MIT OR Apache-2.0)
+egui-winit 0.37.0  (MIT OR Apache-2.0)
+egui_glow 0.37.0  (MIT OR Apache-2.0)
 either 1.19.0  (MIT OR Apache-2.0)
-emath 0.36.2  (MIT OR Apache-2.0)
+emath 0.37.0  (MIT OR Apache-2.0)
 encoding_rs 0.8.42  ((Apache-2.0 OR MIT) AND BSD-3-Clause)
 endi 1.1.1  (MIT)
 enumflags2 0.7.12  (MIT OR Apache-2.0)
 enumflags2_derive 0.7.12  (MIT OR Apache-2.0)
 enumn 0.1.14  (MIT OR Apache-2.0)
-epaint 0.36.2  (MIT OR Apache-2.0)
-epaint_default_fonts 0.36.2  ((MIT OR Apache-2.0) AND OFL-1.1 AND Ubuntu-font-1.0)
+epaint 0.37.0  (MIT OR Apache-2.0)
+epaint_default_fonts 0.37.0  ((MIT OR Apache-2.0) AND OFL-1.1 AND Ubuntu-font-1.0)
 equivalent 1.0.2  (Apache-2.0 OR MIT)
 errno 0.3.14  (MIT OR Apache-2.0)
 error-code 3.4.0  (BSL-1.0)
@@ -134,7 +131,9 @@ fastrand 2.5.0  (Apache-2.0 OR MIT)
 fax 0.2.7  (MIT)
 fdeflate 0.3.7  (MIT OR Apache-2.0)
 fearless_simd 0.4.1  (Apache-2.0 OR MIT)
+fixedbitset 0.5.7  (MIT OR Apache-2.0)
 flate2 1.1.10  (MIT OR Apache-2.0)
+foldhash 0.1.5  (Zlib)
 foldhash 0.2.0  (Zlib)
 font-types 0.12.6  (MIT OR Apache-2.0)
 foreign-types 0.5.0  (MIT/Apache-2.0)
@@ -154,7 +153,7 @@ getrandom 0.2.17  (MIT OR Apache-2.0)
 getrandom 0.3.4  (MIT OR Apache-2.0)
 getrandom 0.4.3  (MIT OR Apache-2.0)
 gif 0.14.2  (MIT OR Apache-2.0)
-glifo 0.2.0  (Apache-2.0 OR MIT)
+glifo 0.3.0  (Apache-2.0 OR MIT)
 glow 0.17.0  (MIT OR Apache-2.0 OR Zlib)
 gltf 1.4.1  (MIT OR Apache-2.0)
 gltf-derive 1.4.1  (MIT OR Apache-2.0)
@@ -168,6 +167,7 @@ gpu-allocator 0.28.0  (MIT OR Apache-2.0)
 guillotiere 0.7.0  (MIT/Apache-2.0)
 half 2.7.1  (MIT OR Apache-2.0)
 harfrust 0.12.0  (MIT)
+hashbrown 0.15.5  (MIT OR Apache-2.0)
 hashbrown 0.16.1  (MIT OR Apache-2.0)
 hashbrown 0.17.1  (MIT OR Apache-2.0)
 hermit-abi 0.5.3  (MIT OR Apache-2.0)
@@ -234,6 +234,7 @@ ndk-sys 0.6.0+11769913  (MIT OR Apache-2.0)
 nix 0.29.0  (MIT)
 nix 0.31.3  (MIT)
 nohash-hasher 0.2.0  (Apache-2.0 OR MIT)
+nom 8.0.0  (MIT)
 num 0.4.3  (MIT OR Apache-2.0)
 num-bigint 0.4.8  (MIT OR Apache-2.0)
 num-complex 0.4.6  (MIT OR Apache-2.0)
@@ -275,15 +276,17 @@ orbclient 0.3.55  (MIT)
 ordered-float 2.10.1  (MIT)
 ordered-float 5.5.0  (MIT)
 ordered-stream 0.2.0  (MIT OR Apache-2.0)
+os_pipe 1.2.3  (MIT)
 parking 2.2.1  (Apache-2.0 OR MIT)
 parking_lot 0.12.5  (MIT OR Apache-2.0)
 parking_lot_core 0.9.12  (MIT OR Apache-2.0)
 peniko 0.6.1  (Apache-2.0 OR MIT)
 percent-encoding 2.3.2  (MIT OR Apache-2.0)
-phf 0.13.1  (MIT)
-phf_generator 0.13.1  (MIT)
-phf_macros 0.13.1  (MIT)
-phf_shared 0.13.1  (MIT)
+petgraph 0.8.3  (MIT OR Apache-2.0)
+phf 0.14.0  (MIT)
+phf_generator 0.14.0  (MIT)
+phf_macros 0.14.0  (MIT)
+phf_shared 0.14.0  (MIT)
 pin-project 1.1.13  (Apache-2.0 OR MIT)
 pin-project-internal 1.1.13  (Apache-2.0 OR MIT)
 pin-project-lite 0.2.17  (Apache-2.0 OR MIT)
@@ -352,6 +355,7 @@ security-framework 3.7.0  (MIT OR Apache-2.0)
 security-framework-sys 2.17.0  (MIT OR Apache-2.0)
 self_cell 1.3.0  (Apache-2.0 OR GPL-2.0-only)
 semver 1.0.28  (MIT OR Apache-2.0)
+send_wrapper 0.6.0  (MIT/Apache-2.0)
 serde 1.0.229  (MIT OR Apache-2.0)
 serde-value 0.7.0  (MIT)
 serde_core 1.0.229  (MIT OR Apache-2.0)
@@ -375,8 +379,6 @@ slab 0.4.12  (MIT)
 slotmap 1.1.1  (Zlib)
 smallvec 1.16.2  (MIT OR Apache-2.0)
 smithay-client-toolkit 0.19.2  (MIT)
-smithay-client-toolkit 0.20.0  (MIT)
-smithay-clipboard 0.7.3  (MIT)
 smol_str 0.2.2  (MIT OR Apache-2.0)
 solidcore 1.0.1  (Apache-2.0)
 solidcore-record 0.1.0  (Apache-2.0)
@@ -409,6 +411,7 @@ toml_writer 1.1.3+spec-1.1.0  (MIT OR Apache-2.0)
 tracing 0.1.44  (MIT)
 tracing-attributes 0.1.31  (MIT)
 tracing-core 0.1.36  (MIT)
+tree_magic_mini 3.2.2  (MIT)
 ttf-parser 0.25.1  (MIT OR Apache-2.0)
 twox-hash 2.1.5  (MIT)
 type-map 0.5.1  (MIT/Apache-2.0)
@@ -419,6 +422,7 @@ uds_windows 1.2.1  (MIT)
 unicode-bidi 0.3.18  (MIT OR Apache-2.0)
 unicode-general-category 1.1.0  (Apache-2.0)
 unicode-ident 1.0.26  ((MIT OR Apache-2.0) AND Unicode-3.0)
+unicode-properties 0.1.5  ((MIT OR Apache-2.0) AND Unicode-3.0)
 unicode-segmentation 1.13.3  (MIT OR Apache-2.0)
 unicode-width 0.2.2  (MIT OR Apache-2.0)
 untrusted 0.9.0  (ISC)
@@ -428,8 +432,8 @@ url 2.5.8  (MIT OR Apache-2.0)
 utf8-zero 0.8.1  (MIT OR Apache-2.0)
 utf8_iter 1.0.4  (Apache-2.0 OR MIT)
 uuid 1.27.0  (Apache-2.0 OR MIT)
-vello_common 0.1.0  (Apache-2.0 OR MIT)
-vello_cpu 0.1.0  (Apache-2.0 OR MIT)
+vello_common 0.2.0  (Apache-2.0 OR MIT)
+vello_cpu 0.2.0  (Apache-2.0 OR MIT)
 wasi 0.11.1+wasi-snapshot-preview1  (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT)
 wasip2 1.0.4+wasi-0.2.12  (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT)
 wasm-bindgen 0.2.129  (MIT OR Apache-2.0)
@@ -442,8 +446,6 @@ wayland-client 0.31.15  (MIT)
 wayland-csd-frame 0.3.0  (MIT)
 wayland-cursor 0.31.14  (MIT)
 wayland-protocols 0.32.13  (MIT)
-wayland-protocols-experimental 20250721.0.1  (MIT)
-wayland-protocols-misc 0.3.12  (MIT)
 wayland-protocols-plasma 0.3.12  (MIT)
 wayland-protocols-wlr 0.3.12  (MIT)
 wayland-scanner 0.31.11  (MIT)
@@ -500,6 +502,7 @@ winit 0.30.13  (Apache-2.0)
 winnow 1.0.4  (MIT)
 winreg 0.56.0  (MIT)
 wit-bindgen 0.57.1  (Apache-2.0 WITH LLVM-exception OR Apache-2.0 OR MIT)
+wl-clipboard-rs 0.9.5  (MIT OR Apache-2.0)
 writeable 0.6.4  (Unicode-3.0)
 x11-dl 2.21.0  (MIT)
 x11rb 0.13.2  (MIT OR Apache-2.0)
@@ -570,13 +573,14 @@ num_enum 0.7.6, num_enum_derive 0.7.6, once_cell 1.21.4, ordered-stream 0.2.0, p
 pin-project 1.1.13, pin-project-internal 1.1.13, pin-project-lite 0.2.17, piper 0.2.5, polling
 3.11.0, portable-atomic 1.15.0, portable-atomic-util 0.2.8, proc-macro-crate 3.5.0, proc-macro2
 1.0.107, quote 1.0.47, ref-cast 1.0.27, ref-cast-impl 1.0.27, rustc-hash 1.1.0, rustc-hash 2.1.3,
-rustix 0.38.44, rustix 1.1.5, rustversion 1.0.23, semver 1.0.28, serde 1.0.229, serde_core 1.0.229,
-serde_derive 1.0.229, serde_derive_internals 0.30.0, serde_json 1.0.151, serde_path_to_error 0.1.20,
-serde_repr 0.1.21, simd_cesu8 1.2.0, smol_str 0.2.2, syn 2.0.119, syn 3.0.6, thiserror 1.0.69,
-thiserror 2.0.21, thiserror-impl 1.0.69, thiserror-impl 2.0.21, typed-path 0.13.0, typeid 1.0.3,
-unicode-ident 1.0.26, utf8-zero 0.8.1, wasi 0.11.1+wasi-snapshot-preview1, wasip2 1.0.4+wasi-0.2.12,
-wit-bindgen 0.57.1, x11-dl 2.21.0, xdg-home 1.3.0, zbus-lockstep 0.5.2, zbus-lockstep-macros 0.5.2,
-zbus_names 3.0.0, zmij 1.0.23, zvariant_utils 2.1.0, zvariant_utils 4.2.0
+rustix 0.38.44, rustix 1.1.5, rustversion 1.0.23, semver 1.0.28, send_wrapper 0.6.0, serde 1.0.229,
+serde_core 1.0.229, serde_derive 1.0.229, serde_derive_internals 0.30.0, serde_json 1.0.151,
+serde_path_to_error 0.1.20, serde_repr 0.1.21, simd_cesu8 1.2.0, smol_str 0.2.2, syn 2.0.119, syn
+3.0.6, thiserror 1.0.69, thiserror 2.0.21, thiserror-impl 1.0.69, thiserror-impl 2.0.21, typed-path
+0.13.0, typeid 1.0.3, unicode-ident 1.0.26, utf8-zero 0.8.1, wasi 0.11.1+wasi-snapshot-preview1,
+wasip2 1.0.4+wasi-0.2.12, wit-bindgen 0.57.1, x11-dl 2.21.0, xdg-home 1.3.0, zbus-lockstep 0.5.2,
+zbus-lockstep-macros 0.5.2, zbus_names 3.0.0, zmij 1.0.23, zvariant_utils 2.1.0, zvariant_utils
+4.2.0
 ================================================================================

 Permission is hereby granted, free of charge, to any
@@ -1086,25 +1090,26 @@ ahash 0.8.12, arrayvec 0.7.8, async-channel 2.5.0, async-executor 1.14.0, async-
 0.9.4, core-foundation-sys 0.8.7, core-graphics 0.23.2, core-graphics-types 0.1.3, core_detect
 1.0.0, crossbeam-channel 0.5.17, crossbeam-deque 0.8.8, crossbeam-epoch 0.9.21, crossbeam-utils
 0.8.23, dbus-secret-service 4.1.0, displaydoc 0.2.7, either 1.19.0, equivalent 1.0.2, errno 0.3.14,
-euclid 0.22.14, event-listener 5.4.2, event-listener-strategy 0.5.4, fastrand 2.5.0, flate2 1.1.10,
-form_urlencoded 1.2.2, futures-lite 2.6.1, gethostname 1.1.0, gif 0.14.2, glow 0.17.0, gltf 1.4.1,
-gltf-derive 1.4.1, gltf-json 1.4.1, hashbrown 0.16.1, hashbrown 0.17.1, hermit-abi 0.5.3, httparse
-1.10.1, idna 1.1.0, idna_adapter 1.2.2, indexmap 2.14.2, itertools 0.15.0, js-sys 0.3.106,
-keyboard-types 0.8.3, khronos-egl 6.0.0, lazy_static 1.5.1, linux-raw-sys 0.12.1, linux-raw-sys
-0.4.15, lock_api 0.4.14, log 0.4.34, muda 0.21.2, num 0.4.3, num-bigint 0.4.8, num-complex 0.4.6,
-num-integer 0.1.47, num-iter 0.1.46, num-rational 0.4.2, num-traits 0.2.19, once_cell 1.21.4,
-openssl-probe 0.2.1, ordered-stream 0.2.0, parking 2.2.1, parking_lot 0.12.5, parking_lot_core
-0.9.12, percent-encoding 2.3.2, piper 0.2.5, plain 0.2.3, png 0.18.1, polling 3.11.0, pollster
-0.4.0, pollster 1.0.1, rayon 1.12.0, rayon-core 1.13.0, renderdoc-sys 1.1.0, robust 1.2.0, ron
-0.12.2, roxmltree 0.21.1, rustc-hash 1.1.0, rustix 0.38.44, rustix 1.1.5, rustls 0.23.46,
-rustls-native-certs 0.8.5, scoped-tls 1.0.1, scopeguard 1.2.0, secret-service 4.0.0,
-security-framework 2.11.1, security-framework 3.7.0, security-framework-sys 2.17.0,
-signal-hook-registry 1.4.8, simd_cesu8 1.2.0, smallvec 1.16.2, smol_str 0.2.2, stable_deref_trait
-1.2.1, tempfile 3.27.0, ttf-parser 0.25.1, unicode-bidi 0.3.18, unicode-segmentation 1.13.3,
-unicode-width 0.2.2, url 2.5.8, uuid 1.27.0, wasi 0.11.1+wasi-snapshot-preview1, wasip2
-1.0.4+wasi-0.2.12, wasm-bindgen 0.2.129, wasm-bindgen-futures 0.4.79, wasm-bindgen-macro 0.2.129,
-wasm-bindgen-macro-support 0.2.129, wasm-bindgen-shared 0.2.129, web-sys 0.3.106, weezl 0.1.12,
-wit-bindgen 0.57.1
+euclid 0.22.14, event-listener 5.4.2, event-listener-strategy 0.5.4, fastrand 2.5.0, fixedbitset
+0.5.7, flate2 1.1.10, form_urlencoded 1.2.2, futures-lite 2.6.1, gethostname 1.1.0, gif 0.14.2, glow
+0.17.0, gltf 1.4.1, gltf-derive 1.4.1, gltf-json 1.4.1, hashbrown 0.15.5, hashbrown 0.16.1,
+hashbrown 0.17.1, hermit-abi 0.5.3, httparse 1.10.1, idna 1.1.0, idna_adapter 1.2.2, indexmap
+2.14.2, itertools 0.15.0, js-sys 0.3.106, keyboard-types 0.8.3, khronos-egl 6.0.0, lazy_static
+1.5.1, linux-raw-sys 0.12.1, linux-raw-sys 0.4.15, lock_api 0.4.14, log 0.4.34, muda 0.21.2, num
+0.4.3, num-bigint 0.4.8, num-complex 0.4.6, num-integer 0.1.47, num-iter 0.1.46, num-rational 0.4.2,
+num-traits 0.2.19, once_cell 1.21.4, openssl-probe 0.2.1, ordered-stream 0.2.0, parking 2.2.1,
+parking_lot 0.12.5, parking_lot_core 0.9.12, percent-encoding 2.3.2, petgraph 0.8.3, piper 0.2.5,
+plain 0.2.3, png 0.18.1, polling 3.11.0, pollster 0.4.0, pollster 1.0.1, rayon 1.12.0, rayon-core
+1.13.0, renderdoc-sys 1.1.0, robust 1.2.0, ron 0.12.2, roxmltree 0.21.1, rustc-hash 1.1.0, rustix
+0.38.44, rustix 1.1.5, rustls 0.23.46, rustls-native-certs 0.8.5, scoped-tls 1.0.1, scopeguard
+1.2.0, secret-service 4.0.0, security-framework 2.11.1, security-framework 3.7.0,
+security-framework-sys 2.17.0, send_wrapper 0.6.0, signal-hook-registry 1.4.8, simd_cesu8 1.2.0,
+smallvec 1.16.2, smol_str 0.2.2, stable_deref_trait 1.2.1, tempfile 3.27.0, ttf-parser 0.25.1,
+unicode-bidi 0.3.18, unicode-properties 0.1.5, unicode-segmentation 1.13.3, unicode-width 0.2.2, url
+2.5.8, uuid 1.27.0, wasi 0.11.1+wasi-snapshot-preview1, wasip2 1.0.4+wasi-0.2.12, wasm-bindgen
+0.2.129, wasm-bindgen-futures 0.4.79, wasm-bindgen-macro 0.2.129, wasm-bindgen-macro-support
+0.2.129, wasm-bindgen-shared 0.2.129, web-sys 0.3.106, weezl 0.1.12, wit-bindgen 0.57.1,
+wl-clipboard-rs 0.9.5
 ================================================================================

 Apache License
@@ -1310,7 +1315,7 @@ See the License for the specific language governing permissions and
 limitations under the License.

 ================================================================================
-allocator-api2 0.2.21, async-trait 0.1.92, dyn-clone 1.0.20, enumn 0.1.14, glifo 0.2.0, itoa 1.0.18,
+allocator-api2 0.2.21, async-trait 0.1.92, dyn-clone 1.0.20, enumn 0.1.14, glifo 0.3.0, itoa 1.0.18,
 libc 0.2.190, litrs 1.0.0, num_enum 0.7.6, num_enum_derive 0.7.6, proc-macro2 1.0.107, quote 1.0.47,
 ref-cast 1.0.27, ref-cast-impl 1.0.27, rustc-hash 2.1.3, rustversion 1.0.23, semver 1.0.28, serde
 1.0.229, serde_core 1.0.229, serde_derive 1.0.229, serde_derive_internals 0.30.0, serde_json
@@ -1530,7 +1535,7 @@ android-activity 0.6.1, arboard 3.6.1, color 0.3.3, fdeflate 0.3.7, fearless_sim
 image 0.25.10, image-webp 0.2.4, linebender_resource_handle 0.1.1, miniz_oxide 0.8.9, miniz_oxide
 0.9.1, naga 30.0.1, naga-types 30.0.1, pin-project 1.1.13, pin-project-internal 1.1.13,
 pin-project-lite 0.2.17, portable-atomic 1.15.0, portable-atomic-util 0.2.8, range-alloc 0.1.5,
-raw-window-handle 0.6.2, simdutf8 0.1.5, vello_common 0.1.0, vello_cpu 0.1.0, wgpu 30.0.1, wgpu-core
+raw-window-handle 0.6.2, simdutf8 0.1.5, vello_common 0.2.0, vello_cpu 0.2.0, wgpu 30.0.1, wgpu-core
 30.0.1, wgpu-core-deps-apple 30.0.1, wgpu-core-deps-emscripten 30.0.1, wgpu-core-deps-wasm 30.0.1,
 wgpu-core-deps-windows-linux-android 30.0.1, wgpu-hal 30.0.1, wgpu-naga-bridge 30.0.1, wgpu-types
 30.0.1
@@ -2588,7 +2593,7 @@ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

 ================================================================================
-bit-set 0.10.0, bit-vec 0.9.1, downcast-rs 1.2.1, egui-wgpu 0.36.2, presser 0.3.1
+bit-set 0.10.0, bit-vec 0.9.1, downcast-rs 1.2.1, egui-wgpu 0.37.0, presser 0.3.1
 ================================================================================

 Apache License
@@ -3134,7 +3139,7 @@ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

 ================================================================================
-calloop 0.13.0, calloop 0.14.5, smithay-client-toolkit 0.19.2, smithay-client-toolkit 0.20.0
+calloop 0.13.0, smithay-client-toolkit 0.19.2
 ================================================================================

 Copyright (c) 2018 Victor Berger
@@ -3158,7 +3163,7 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 THE SOFTWARE.

 ================================================================================
-calloop-wayland-source 0.3.0, calloop-wayland-source 0.4.1
+calloop-wayland-source 0.3.0
 ================================================================================

 Copyright (c) 2023 Kirill Chibisov
@@ -5231,7 +5236,7 @@ have been licensed under extremely permissive terms.
 ------------------------------------------------------------------------------

 ================================================================================
-egui-wgpu 0.36.2
+egui-wgpu 0.37.0
 ================================================================================

 Copyright (c) 2018-2021 Emil Ernerfeldt <emil.ernerfeldt@gmail.com>
@@ -5261,7 +5266,7 @@ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

 ================================================================================
-either 1.19.0, itertools 0.15.0
+either 1.19.0, itertools 0.15.0, petgraph 0.8.3
 ================================================================================

 Copyright (c) 2015
@@ -5709,6 +5714,36 @@ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
 IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

+================================================================================
+fixedbitset 0.5.7
+================================================================================
+
+Copyright (c) 2015-2017
+
+Permission is hereby granted, free of charge, to any
+person obtaining a copy of this software and associated
+documentation files (the "Software"), to deal in the
+Software without restriction, including without
+limitation the rights to use, copy, modify, merge,
+publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software
+is furnished to do so, subject to the following
+conditions:
+
+The above copyright notice and this permission notice
+shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
+IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+
 ================================================================================
 flate2 1.1.10
 ================================================================================
@@ -5740,7 +5775,7 @@ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

 ================================================================================
-foldhash 0.2.0
+foldhash 0.1.5, foldhash 0.2.0
 ================================================================================

 Copyright (c) 2024 Orson Peters
@@ -6511,7 +6546,7 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.

 ================================================================================
-glifo 0.2.0
+glifo 0.3.0
 ================================================================================

 Copyright 2025 the Vello Authors
@@ -7138,7 +7173,7 @@ OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.

 ================================================================================
-hashbrown 0.16.1, hashbrown 0.17.1
+hashbrown 0.15.5, hashbrown 0.16.1, hashbrown 0.17.1
 ================================================================================

 Copyright (c) 2016 Amanieu d'Antras
@@ -9459,6 +9494,31 @@ OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

+================================================================================
+nom 8.0.0
+================================================================================
+
+Copyright (c) 2014-2019 Geoffroy Couprie
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
 ================================================================================
 num_enum 0.7.6, num_enum_derive 0.7.6
 ================================================================================
@@ -9547,6 +9607,30 @@ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
 IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

+================================================================================
+os_pipe 1.2.3
+================================================================================
+
+The MIT License (MIT)
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
 ================================================================================
 parking 2.2.1
 ================================================================================
@@ -9562,7 +9646,7 @@ option. All files in the project carrying such notice may not be
 copied, modified, or distributed except according to those terms.

 ================================================================================
-phf 0.13.1, phf_generator 0.13.1, phf_macros 0.13.1, phf_shared 0.13.1
+phf 0.14.0, phf_generator 0.14.0, phf_macros 0.14.0, phf_shared 0.14.0
 ================================================================================

 The MIT License (MIT)
@@ -12377,30 +12461,6 @@ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
 IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

-================================================================================
-smithay-clipboard 0.7.3
-================================================================================
-
-Copyright (c) 2018 Lucas Timmins & Victor Berger
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.
-
 ================================================================================
 solidcore 1.0.1
 ================================================================================
@@ -12973,6 +13033,32 @@ OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
 IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

+================================================================================
+tree_magic_mini 3.2.2
+================================================================================
+
+MIT License
+
+Copyright (c) 2017 Aaron Hancock
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+
 ================================================================================
 ttf-parser 0.25.1
 ================================================================================
@@ -13795,7 +13881,7 @@ carrying such notice may not be copied, modified, or distributed except
 according to those terms.

 ================================================================================
-unicode-bidi 0.3.18, unicode-segmentation 1.13.3, unicode-width 0.2.2
+unicode-bidi 0.3.18, unicode-properties 0.1.5, unicode-segmentation 1.13.3, unicode-width 0.2.2
 ================================================================================

 Copyright (c) 2015 The Rust Project Developers
@@ -13869,7 +13955,51 @@ dealings in these Data Files or Software without prior written
 authorization of the copyright holder.

 ================================================================================
-unicode-segmentation 1.13.3, unicode-width 0.2.2
+unicode-properties 0.1.5
+================================================================================
+
+UNICODE LICENSE V3
+
+COPYRIGHT AND PERMISSION NOTICE
+
+Copyright © 1991-2026 Unicode, Inc.
+
+NOTICE TO USER: Carefully read the following legal agreement. BY
+DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING DATA FILES, AND/OR
+SOFTWARE, YOU UNEQUIVOCALLY ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE
+TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO NOT
+DOWNLOAD, INSTALL, COPY, DISTRIBUTE OR USE THE DATA FILES OR SOFTWARE.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of data files and any associated documentation (the "Data Files") or
+software and any associated documentation (the "Software") to deal in the
+Data Files or Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, and/or sell
+copies of the Data Files or Software, and to permit persons to whom the
+Data Files or Software are furnished to do so, provided that either (a)
+this copyright and permission notice appear with all copies of the Data
+Files or Software, or (b) this copyright and permission notice appear in
+associated Documentation.
+
+THE DATA FILES AND SOFTWARE ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
+THIRD PARTY RIGHTS.
+
+IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE
+BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,
+OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA
+FILES OR SOFTWARE.
+
+Except as contained in this notice, the name of a copyright holder shall
+not be used in advertising or otherwise to promote the sale, use or other
+dealings in these Data Files or Software without prior written
+authorization of the copyright holder.
+
+================================================================================
+unicode-properties 0.1.5, unicode-segmentation 1.13.3, unicode-width 0.2.2
 ================================================================================

 Licensed under the Apache License, Version 2.0
@@ -14015,7 +14145,7 @@ IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 DEALINGS IN THE SOFTWARE.

 ================================================================================
-vello_common 0.1.0, vello_cpu 0.1.0
+vello_common 0.2.0, vello_cpu 0.2.0
 ================================================================================

 Copyright 2020 the Vello Authors
@@ -14046,8 +14176,8 @@ DEALINGS IN THE SOFTWARE.

 ================================================================================
 wayland-backend 0.3.17, wayland-client 0.31.15, wayland-cursor 0.31.14, wayland-protocols 0.32.13,
-wayland-protocols-experimental 20250721.0.1, wayland-protocols-misc 0.3.12, wayland-protocols-plasma
-0.3.12, wayland-protocols-wlr 0.3.12, wayland-scanner 0.31.11, wayland-sys 0.31.11
+wayland-protocols-plasma 0.3.12, wayland-protocols-wlr 0.3.12, wayland-scanner 0.31.11, wayland-sys
+0.31.11
 ================================================================================

 Copyright (c) 2015 Elinor Berger
@@ -14942,6 +15072,36 @@ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 THE SOFTWARE.

+================================================================================
+wl-clipboard-rs 0.9.5
+================================================================================
+
+Copyright (c) 2019 Ivan Molodetskikh
+
+Permission is hereby granted, free of charge, to any
+person obtaining a copy of this software and associated
+documentation files (the "Software"), to deal in the
+Software without restriction, including without
+limitation the rights to use, copy, modify, merge,
+publish, distribute, sublicense, and/or sell copies of
+the Software, and to permit persons to whom the Software
+is furnished to do so, subject to the following
+conditions:
+
+The above copyright notice and this permission notice
+shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
+ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
+TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
+SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
+IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+
 ================================================================================
 x11rb 0.13.2, x11rb-protocol 0.13.2
 ================================================================================
@@ -15967,35 +16127,34 @@ Crates whose package carries no licence file (their licence is named in Cargo.to
 texts are as in SolidCraft's own LICENSE-MIT and LICENSE-APACHE)
 ================================================================================

-accesskit 0.24.1: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_atspi_common 0.18.1: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_consumer 0.35.0: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_consumer 0.36.0: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_consumer 0.38.0: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_macos 0.26.3: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_unix 0.21.1: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_windows 0.32.1: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
-accesskit_winit 0.32.2: Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit 0.25.2: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_atspi_common 0.21.1: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_consumer 0.39.2: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_ios 0.2.2: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_macos 0.27.2: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_unix 0.24.1: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_windows 0.35.2: MIT OR Apache-2.0 (https://github.com/AccessKit/accesskit)
+accesskit_winit 0.34.2: Apache-2.0 (https://github.com/AccessKit/accesskit)
 block2 0.5.1: MIT (https://github.com/madsmtm/objc2)
 block2 0.6.2: MIT (https://github.com/madsmtm/objc2)
-cadmpeg-codec-freecad 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-codec-rhino 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-codec-step 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-container 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-core 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-ir 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
-cadmpeg-registry 0.6.3: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-codec-freecad 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-codec-rhino 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-codec-step 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-container 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-core 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-ir 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
+cadmpeg-registry 0.6.7: Apache-2.0 (https://github.com/cadmpeg/cadmpeg)
 clipboard-win 5.4.1: BSL-1.0 (https://github.com/DoumanAsh/clipboard-win)
 dispatch 0.2.0: MIT (http://github.com/SSheldon/rust-dispatch)
 dispatch2 0.3.1: Zlib OR Apache-2.0 OR MIT (https://github.com/madsmtm/objc2)
-ecolor 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui)
-eframe 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/eframe)
-egui 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui)
-egui-winit 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/egui-winit)
-egui_glow 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/egui_glow)
-emath 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/emath)
-epaint 0.36.2: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/epaint)
-epaint_default_fonts 0.36.2: (MIT OR Apache-2.0) AND OFL-1.1 AND Ubuntu-font-1.0 (https://github.com/emilk/egui/tree/main/crates/epaint_default_fonts)
+ecolor 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui)
+eframe 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/eframe)
+egui 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui)
+egui-winit 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/egui-winit)
+egui_glow 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/egui_glow)
+emath 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/emath)
+epaint 0.37.0: MIT OR Apache-2.0 (https://github.com/emilk/egui/tree/main/crates/epaint)
+epaint_default_fonts 0.37.0: (MIT OR Apache-2.0) AND OFL-1.1 AND Ubuntu-font-1.0 (https://github.com/emilk/egui/tree/main/crates/epaint_default_fonts)
 jni 0.22.4: MIT OR Apache-2.0 (https://github.com/jni-rs/jni-rs)
 jni-macros 0.22.4: MIT OR Apache-2.0 (https://github.com/jni-rs/jni-rs)
 jni-sys-macros 0.4.1: MIT OR Apache-2.0 (https://github.com/jni-rs/jni-sys)
@@ -11,7 +11,7 @@ use std::process::{Command, ExitCode};
 const TARGET: &str = "solidcraft-cli";

 fn main() -> ExitCode {
-    eprintln!("solvecraft-cli is deprecated and will be removed in a later release: use solidcraft-cli");
+    solidcraft_engine::note!("solvecraft-cli is deprecated and will be removed in a later release: use solidcraft-cli");
    let sibling = std::env::current_exe()
        .ok()
        .and_then(|exe| exe.parent().map(|dir| dir.join(format!("{TARGET}{}", std::env::consts::EXE_SUFFIX))))
@@ -23,7 +23,7 @@ fn main() -> ExitCode {
            None => ExitCode::FAILURE,
        },
        Err(e) => {
-            eprintln!("solvecraft-cli: could not run {}: {e}", program.to_string_lossy());
+            solidcraft_engine::note!("solvecraft-cli: could not run {}: {e}", program.to_string_lossy());
            ExitCode::FAILURE
        }
    }
@@ -33,8 +33,8 @@ pub fn one(args: &[String]) -> Result<(), String> {
    std::panic::set_hook(Box::new(|_| {
        PANICS.fetch_add(1, std::sync::atomic::Ordering::SeqCst);
    }));
-    eprintln!("design {seed}");
-    let run = fuzz::run_with(seed, steps, &mut |st| eprintln!("step {}", serde_json::to_string(st).unwrap_or_default()));
+    solidcraft_engine::note!("design {seed}");
+    let run = fuzz::run_with(seed, steps, &mut |st| solidcraft_engine::note!("step {}", serde_json::to_string(st).unwrap_or_default()));
    let mut design = json!({
        "outcome": run.outcome,
        "steps": run.steps.iter().map(|s| s.kind).collect::<Vec<_>>(),
@@ -45,13 +45,13 @@ pub fn one(args: &[String]) -> Result<(), String> {
    if run.outcome.is_bug() {
        design["script"] = run.script();
        if minimise {
-            eprintln!("minimise");
+            solidcraft_engine::note!("minimise");
            let m = fuzz::minimise(&run);
            design["minimal"] = json!({"outcome": m.outcome, "steps": m.steps.iter().map(|s| s.kind).collect::<Vec<_>>(), "script": m.script()});
        }
    }
    let (a, b) = solidcraft_engine::fuzz::boolean_shapes(seed);
-    eprintln!("boolean {seed} {} {}", serde_json::to_string(&a).unwrap_or_default(), serde_json::to_string(&b).unwrap_or_default());
+    solidcraft_engine::note!("boolean {seed} {} {}", serde_json::to_string(&a).unwrap_or_default(), serde_json::to_string(&b).unwrap_or_default());
    let b = boolean_case(seed);
    let bp = PANICS.swap(0, std::sync::atomic::Ordering::SeqCst);
    println!("{}", json!({"seed": seed, "design": design, "boolean": b, "boolean_panics": bp}));
@@ -162,11 +162,14 @@ fn record(v: &Value, out_dir: Option<&str>) {
    let d = &v["design"];
    let bug = matches!(d["outcome"]["kind"].as_str(), Some("failed" | "panic" | "invalid" | "volume"));
    if bug || v.get("timeout").is_some() || v.get("crash").is_some() {
-        eprintln!("seed {seed}: {}", if bug { format!("{} {}", d["outcome"]["kind"], d["outcome"]["detail"]) } else { format!("{v}") });
+        solidcraft_engine::note!(
+            "seed {seed}: {}",
+            if bug { format!("{} {}", d["outcome"]["kind"], d["outcome"]["detail"]) } else { format!("{v}") }
+        );
    }
    let bk = v["boolean"]["outcome"].as_str().unwrap_or("ok");
    if bk != "ok" {
-        eprintln!("seed {seed}: boolean {bk} {}", v["boolean"]["detail"]);
+        solidcraft_engine::note!("seed {seed}: boolean {bk} {}", v["boolean"]["detail"]);
    }
    if let Some(dir) = out_dir {
        use std::io::Write;
@@ -18,7 +18,7 @@
 //! solidcraft-cli oracle <case-dir>...                         replay recipes and compare with expected.json
 //! solidcraft-cli kernel-cases [--json] [--dumps=DIR] [--validation=MODE] <case-dir>... the kernel regression rig (tests/kernel-cases)
 //! solidcraft-cli mcp [--headless] [--in design|script] [--connect HOST:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]
-//!                    [--param-check off|warn|strict]
+//!                    [--param-check off|warn|strict] [--compact]
 //!                                                             MCP server on stdio (docs/mcp.md)
 //! solidcraft-cli mcp setup [--dry-run] [--client NAME] [--live] (alias: mcp install) add it to OpenCode, Claude Desktop, Claude Code, Cursor
 //! solidcraft-cli licences                                     SolidCraft's licence and the third-party licences
@@ -91,7 +91,7 @@ const USAGE_KERNEL_CASES: &str = "  solidcraft-cli kernel-cases <case-dir>... [-
 const USAGE_FUZZ: &str =
    "  solidcraft-cli fuzz [--from N] [--count N] [--jobs J] [--timeout S] [--steps N] [--minimise] [--out DIR] [--report FILE]\n";
 /// `mcp`'s lines in the usage.
-const USAGE_MCP: &str = "  solidcraft-cli mcp [--headless] [--in design.sc|script.json] [--connect 127.0.0.1:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]\n                     [--param-check off|warn|strict] [--render-gpu]\n  solidcraft-cli mcp setup [--dry-run] [--client opencode|claude-desktop|claude-code|cursor] [--live]\n      (adds a `solidcraft` server, with this program's path, to each installed AI client; --live adds `solidcraft-live` for the running app; alias: mcp install)\n";
+const USAGE_MCP: &str = "  solidcraft-cli mcp [--headless] [--in design.sc|script.json] [--connect 127.0.0.1:PORT [--token T]] [--allow-path DIR]... [--allow-any-path]\n                     [--param-check off|warn|strict] [--render-gpu] [--compact]\n      (--compact, SOLIDCRAFT_MCP_COMPACT=1 or the app's Preferences › AI (with --connect): compact tool output for\n       agents: inspect_design summarises sketches and takes `sketches` by name and a `bodies` filter, and tool JSON\n       is not pretty-printed; off by default)\n  solidcraft-cli mcp setup [--dry-run] [--client opencode|claude-desktop|claude-code|cursor] [--live]\n      (adds a `solidcraft` server, with this program's path, to each installed AI client; --live adds `solidcraft-live` for the running app; alias: mcp install)\n";
 /// `crashes`'s lines in the usage.
 const USAGE_CRASHES: &str = "  solidcraft-cli crashes [list [--json] | show <id> | replay <id> | dir | clear [<id>]]\n";
 /// `licences`'s lines in the usage.
@@ -154,7 +154,7 @@ fn main() -> ExitCode {
        }
    };
    if let Err(e) = max_file_size(&mut args) {
-        eprintln!("error: {e}");
+        solidcraft_engine::note!("error: {e}");
        return ExitCode::FAILURE;
    }
    let r = match args.first().map(String::as_str) {
@@ -235,7 +235,7 @@ fn main() -> ExitCode {
    match r {
        Ok(()) => ExitCode::SUCCESS,
        Err(e) => {
-            eprintln!("error: {e}");
+            solidcraft_engine::note!("error: {e}");
            ExitCode::FAILURE
        }
    }
@@ -351,7 +351,7 @@ fn run_script_warning(s: &mut Session, path: &str, script: &Value) -> Result<Vec
 /// Step `step`'s `param_warnings` on stderr, one per line, named after the script at `path`.
 fn print_param_warnings(path: &str, step: usize, r: &Value) {
    for w in r.get("param_warnings").and_then(Value::as_array).into_iter().flatten() {
-        eprintln!("{path}: step {}: {}", step + 1, w.as_str().unwrap_or_default());
+        solidcraft_engine::note!("{path}: step {}: {}", step + 1, w.as_str().unwrap_or_default());
    }
 }

@@ -598,10 +598,10 @@ fn cmd_script(args: &[String]) -> Result<(), String> {
    let out = flag(args, "--out");
    let r = s.execute("timeline.export_script", &json!({"path": out})).map_err(|e| e.to_string())?;
    for what in r["omitted"].as_array().into_iter().flatten().filter_map(Value::as_str) {
-        eprintln!("note: the script leaves out {what}");
+        solidcraft_engine::note!("note: the script leaves out {what}");
    }
    match out {
-        Some(out) => eprintln!("{out}: {} steps", r["steps"]),
+        Some(out) => solidcraft_engine::note!("{out}: {} steps", r["steps"]),
        None => println!("{}", pretty(&r["script"])),
    }
    Ok(())
@@ -632,7 +632,7 @@ fn cmd_gpu(args: &[String]) -> Result<(), String> {
    );
    match s.lands_on {
        Some(solidcraft_gpu::select::Landing::Cpu) => {
-            eprintln!("warning: {}", solidcraft_engine::capture::CPU_WARNING);
+            solidcraft_engine::note!("warning: {}", solidcraft_engine::capture::CPU_WARNING);
            Ok(())
        }
        Some(_) => Ok(()),
@@ -709,7 +709,7 @@ fn cmd_snapshot(args: &[String]) -> Result<(), String> {
    std::fs::write(out, &png.bytes).map_err(|e| format!("{out}: {e}"))?;
    let mut reply = json!({"path": out, "width": w, "height": h, "bytes": png.bytes.len(), "renderer": png.renderer});
    if let Some(w) = solidcraft_engine::capture::warning(png.renderer) {
-        eprintln!("warning: {w}");
+        solidcraft_engine::note!("warning: {w}");
        reply["warning"] = json!(w);
    }
    println!("{}", pretty(&reply));
@@ -792,11 +792,15 @@ fn cmd_mcp(args: &[String]) -> Result<(), String> {
        return Err("mcp: --render-gpu installs a headless image host; a connected application owns its own device".into());
    }
    install_renderer();
+    let options = solidcraft_mcp::Options::from_args_and_env(args).map_err(|e| format!("mcp: {e}"))?;
+    if options.compact {
+        eprintln!("solidcraft mcp: compact output (inspect_design summarises sketches; tool JSON is not pretty-printed)");
+    }
    let scope = (!args.iter().any(|a| a == "--allow-any-path"))
        .then(|| solidcraft_mcp::agent_scope(flags(args, "--allow-path").into_iter().map(std::path::PathBuf::from)));
    if let Some(s) = &scope {
        let roots: Vec<String> = s.roots().iter().map(|r| r.display().to_string()).collect();
-        eprintln!(
+        solidcraft_engine::note!(
            "solidcraft mcp: files limited to {} and the folders of designs opened or saved here (--allow-path DIR adds one, --allow-any-path lifts the limit)",
            roots.join(", ")
        );
@@ -804,7 +808,7 @@ fn cmd_mcp(args: &[String]) -> Result<(), String> {
            .and_then(|p| std::path::Path::new(p).parent())
            .map(|d| if d.as_os_str().is_empty() { std::path::Path::new(".") } else { d });
        if let Some(why) = design_dir.and_then(solidcraft_engine::io::vfs::design_folder_refusal) {
-            eprintln!("solidcraft mcp: the design's folder is left out because {why}; add it with --allow-path if you mean it");
+            solidcraft_engine::note!("solidcraft mcp: the design's folder is left out because {why}; add it with --allow-path if you mean it");
        }
    }
    // How calls that break a command's parameter contract are treated, headless or bridged.
@@ -818,7 +822,7 @@ fn cmd_mcp(args: &[String]) -> Result<(), String> {
            // Serve without the app too: the tools connect once it runs, and say it isn't until then.
            let mut remote = solidcraft_mcp::Remote::new(addr, flag(args, "--token")).with_param_check(param_check);
            if let Err(e) = remote.try_connect() {
-                eprintln!(
+                solidcraft_engine::note!(
                    "solidcraft mcp: no SolidCraft app at {addr} yet ({e}); start it with `solidcraft --control {port}` \
                     (or SOLIDCRAFT_CONTROL_PORT={port}), tool calls connect once it runs"
                );
@@ -835,9 +839,9 @@ fn cmd_mcp(args: &[String]) -> Result<(), String> {
        (None, None) => {
            let auto = !args.iter().any(|a| a == "--headless");
            if auto && let Some(port) = discover_app() {
-                eprintln!("solidcraft mcp: bridged to the running app at 127.0.0.1:{port} (--headless starts a session of its own)");
+                solidcraft_engine::note!("solidcraft mcp: bridged to the running app at 127.0.0.1:{port} (--headless starts a session of its own)");
                let remote = solidcraft_mcp::Remote::new(&format!("127.0.0.1:{port}"), flag(args, "--token")).with_param_check(param_check);
-                return serve_mcp(Box::new(remote), scope);
+                return serve_mcp(Box::new(remote), scope, options);
            }
            let mut headless = solidcraft_mcp::Headless::default();
            headless.session.param_check = param_check;
@@ -852,13 +856,17 @@ fn cmd_mcp(args: &[String]) -> Result<(), String> {
            }
        }
    };
-    serve_mcp(backend, scope)
+    serve_mcp(backend, scope, options)
 }

-fn serve_mcp(backend: Box<dyn solidcraft_mcp::Backend>, scope: Option<solidcraft_engine::io::vfs::PathScope>) -> Result<(), String> {
+fn serve_mcp(
+    backend: Box<dyn solidcraft_mcp::Backend>,
+    scope: Option<solidcraft_engine::io::vfs::PathScope>,
+    options: solidcraft_mcp::Options,
+) -> Result<(), String> {
    let stdin = std::io::stdin();
    let stdout = std::io::stdout();
-    solidcraft_mcp::Server::new(backend).with_path_scope(scope).serve(stdin.lock(), stdout.lock()).map_err(|e| e.to_string())
+    solidcraft_mcp::Server::new(backend).with_path_scope(scope).with_options(options).serve(stdin.lock(), stdout.lock()).map_err(|e| e.to_string())
 }

 /// The port of the running desktop app: the one its discovery file names, if something listens
@@ -188,3 +188,26 @@ fn max_file_size_raises_the_limit_and_refuses_bad_sizes() {
    assert!(!output.status.success() && !stderr.contains("too large"), "{stderr}");
    let _ = std::fs::remove_dir_all(&dir);
 }
+
+/// #10111: a line for a stderr whose reader has gone (the pipe closed before it, as an agent may
+/// leave the MCP server's, and the app that one starts) is dropped, and the command ends as it
+/// would with stderr open: here a script that isn't there fails with 1, where `eprintln!`
+/// panicked with "failed printing to stderr" (101).
+#[test]
+fn a_closed_stderr_does_not_stop_the_cli() {
+    for _ in 0..5 {
+        let mut child = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli"))
+            .args(["run", "no-such-script.json"])
+            .stdout(Stdio::null())
+            .stderr(Stdio::piped())
+            .spawn()
+            .unwrap();
+        drop(child.stderr.take());
+        assert_eq!(child.wait().unwrap().code(), Some(1));
+    }
+    // The old name's alias writes its deprecation notice first: an agent still configured with
+    // `solvecraft-cli mcp` must get the server, not that panic.
+    let mut child = Command::new(env!("CARGO_BIN_EXE_solvecraft-cli")).arg("--help").stdout(Stdio::null()).stderr(Stdio::piped()).spawn().unwrap();
+    drop(child.stderr.take());
+    assert_eq!(child.wait().unwrap().code(), Some(0));
+}
@@ -0,0 +1,48 @@
+//! `mcp --compact` and `SOLIDCRAFT_MCP_COMPACT` turn on compact tool output; without them the
+//! server's tools are as they always were.
+
+use std::io::Write;
+use std::process::{Command, Stdio};
+
+use serde_json::{Value, json};
+
+/// `inspect_design`'s input schema as `solidcraft-cli mcp` with `args` and `env` lists it, or
+/// the server's stderr when it does not start.
+fn inspect_schema(args: &[&str], env: Option<&str>) -> Result<Value, String> {
+    let mut cmd = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli"));
+    // --headless: never bridge to (and read the preference of) an app the developer has running.
+    cmd.args(["mcp", "--headless", "--allow-any-path"]).args(args).stdin(Stdio::piped()).stdout(Stdio::piped()).stderr(Stdio::piped());
+    match env {
+        Some(v) => cmd.env("SOLIDCRAFT_MCP_COMPACT", v),
+        None => cmd.env_remove("SOLIDCRAFT_MCP_COMPACT"),
+    };
+    let mut child = cmd.spawn().unwrap();
+    {
+        let mut stdin = child.stdin.take().unwrap();
+        // The server may refuse to start and close stdin first.
+        let _ = writeln!(stdin, "{}", json!({"jsonrpc": "2.0", "id": 1, "method": "tools/list"}));
+    }
+    let out = child.wait_with_output().unwrap();
+    if !out.status.success() {
+        return Err(String::from_utf8_lossy(&out.stderr).into_owned());
+    }
+    let reply: Value = serde_json::from_slice(&out.stdout).unwrap();
+    let tools = reply["result"]["tools"].as_array().cloned().unwrap_or_default();
+    Ok(tools.into_iter().find(|t| t["name"] == "inspect_design").map(|t| t["inputSchema"].clone()).unwrap_or(Value::Null))
+}
+
+#[test]
+fn compact_output_is_off_unless_asked() {
+    let plain = inspect_schema(&[], None).unwrap();
+    assert_eq!(plain["properties"]["sketches"]["type"], "boolean", "{plain}");
+    assert!(plain["properties"].get("bodies").is_none(), "{plain}");
+    assert_eq!(inspect_schema(&[], Some("0")).unwrap(), plain);
+
+    for (args, env) in [(&["--compact"][..], None), (&[][..], Some("1")), (&[][..], Some("true"))] {
+        let compact = inspect_schema(args, env).unwrap();
+        assert!(compact["properties"]["bodies"].is_object(), "{args:?} {env:?}: {compact}");
+    }
+
+    let e = inspect_schema(&[], Some("maybe")).unwrap_err();
+    assert!(e.contains("SOLIDCRAFT_MCP_COMPACT"), "{e}");
+}
@@ -60,15 +60,25 @@ fn mcp_connect_serves_before_the_app_runs_and_reaches_it_once_it_does() {
    let listener = TcpListener::bind(&addr).unwrap();
    let app = std::thread::spawn(move || {
        let (stream, _) = listener.accept().unwrap();
-        let mut line = String::new();
-        BufReader::new(stream.try_clone().unwrap()).read_line(&mut line).unwrap();
-        let req: Value = serde_json::from_str(&line).unwrap();
-        let reply = if req["token"] == json!(token) {
-            json!({"id": req["id"], "ok": true, "result": {"bodies": [], "method": req["method"]}})
-        } else {
-            json!({"id": req["id"], "ok": false, "error": format!("unauthorized: token {}", req["token"])})
-        };
-        writeln!(&stream, "{reply}").unwrap();
+        let mut lines = BufReader::new(stream.try_clone().unwrap());
+        loop {
+            let mut line = String::new();
+            lines.read_line(&mut line).unwrap();
+            let req: Value = serde_json::from_str(&line).unwrap();
+            // The server first asks for the agents' output options (the compact preference: off).
+            let options = req["method"] == "mcp.options";
+            let reply = if req["token"] != json!(token) {
+                json!({"id": req["id"], "ok": false, "error": format!("unauthorized: token {}", req["token"])})
+            } else if options {
+                json!({"id": req["id"], "ok": true, "result": {"compact": false}})
+            } else {
+                json!({"id": req["id"], "ok": true, "result": {"bodies": [], "method": req["method"]}})
+            };
+            writeln!(&stream, "{reply}").unwrap();
+            if !options {
+                break;
+            }
+        }
    });
    let r = ask(4, "tools/call", measure);
    assert_ne!(r["result"]["isError"], true, "{r}");
@@ -111,10 +121,21 @@ fn mcp_without_arguments_finds_the_running_app() {
                break (stream, line);
            }
        };
-        let req: Value = serde_json::from_str(&line).unwrap();
-        let ok = req["token"] == json!(token);
-        let reply = json!({"id": req["id"], "ok": ok, "result": {"bodies": [], "method": req["method"]}, "error": "unauthorized"});
-        writeln!(&stream, "{reply}").unwrap();
+        let mut lines = BufReader::new(stream.try_clone().unwrap());
+        let mut line = line;
+        // The server first asks for the agents' output options (the compact preference: off).
+        loop {
+            let req: Value = serde_json::from_str(&line).unwrap();
+            let ok = req["token"] == json!(token);
+            let options = req["method"] == "mcp.options";
+            let result = if options { json!({"compact": false}) } else { json!({"bodies": [], "method": req["method"]}) };
+            writeln!(&stream, "{}", json!({"id": req["id"], "ok": ok, "result": result, "error": "unauthorized"})).unwrap();
+            if !options {
+                break;
+            }
+            line.clear();
+            lines.read_line(&mut line).unwrap();
+        }
    });
    let mut child = Command::new(env!("CARGO_BIN_EXE_solidcraft-cli"))
        .args(["mcp", "--allow-any-path"])
@@ -25,6 +25,7 @@ solidcraft-engine = { workspace = true }
 solidcraft-ui-egui = { workspace = true }
 egui = { workspace = true }
 log = { workspace = true }
+serde_json = { workspace = true }
 url = "2"
 percent-encoding = "2"

@@ -33,7 +34,6 @@ eframe = { workspace = true, features = ["default_fonts", "wgpu", "accesskit"] }
 wasm-bindgen = "0.2"
 wasm-bindgen-futures = "0.4"
 js-sys = "0.3"
-serde_json = { workspace = true }
 web-sys = { version = "0.3", features = [
    "Window", "Document", "Element", "HtmlElement", "HtmlCanvasElement", "Location", "Navigator", "StorageManager",
    "FileSystemHandle", "FileSystemDirectoryHandle", "FileSystemFileHandle", "FileSystemGetFileOptions", "FileSystemGetDirectoryOptions", "FileSystemWritableFileStream",
@@ -553,7 +553,7 @@ mod web {
    /// Open a design remembered from an earlier session (a recent one, after a reload): ask once
    /// for access to the file (call in the click), read it into the engine's files and queue it
    /// to open. A file that is gone is forgotten and dropped from the recent designs.
-    pub fn restore(files: &Rc<Files>, path: &str) {
+    pub fn restore(files: &Rc<Files>, path: &str, on_opened: Option<Box<dyn FnOnce()>>) {
        let Some((id, name)) = parse(path) else { return };
        let (files, path, id, name) = (files.clone(), path.to_string(), id.to_string(), name.to_string());
        spawn_local(async move {
@@ -568,6 +568,9 @@ mod web {
                    files.opened.borrow_mut().push(path);
                    files.wake();
                    touch(&id).await;
+                    if let Some(done) = on_opened {
+                        done();
+                    }
                }
                Err(e) => {
                    let gone = e.contains("NotFoundError") || e.contains("could not be found") || e.contains("no longer remembers");
@@ -5,7 +5,8 @@
 //! and go out as downloads (exports, and "Download design"). Where the File System Access API
 //! exists a design also lives on the computer's disk, saved and opened through the browser's file
 //! dialogs (`disk.rs`). An autosave of unsaved work is kept in OPFS and offered again after a
-//! reload or a crash.
+//! reload or a crash. With "keep unsaved work in this browser" on, each open design's unsaved
+//! changes are kept there instead, one copy per design (`keep.rs`, #10220).

 use std::cell::{Cell, RefCell};
 use std::rc::Rc;
@@ -13,7 +14,7 @@ use std::rc::Rc;
 use js_sys::{Array, Function, Object, Reflect, Uint8Array};
 use solidcraft_engine::io::vfs;

-use crate::disk;
+use crate::{disk, keep};
 use wasm_bindgen::{JsCast as _, JsValue, closure::Closure};
 use wasm_bindgen_futures::{JsFuture, spawn_local};
 use web_sys::{
@@ -79,6 +80,16 @@ pub struct Files {
    pub recovery: RefCell<Option<(String, Option<String>)>>,
    /// The app's context, to wake it when a browser call finishes.
    pub ctx: RefCell<Option<egui::Context>>,
+    /// This page's id: the copies it keeps are named after it (`keep::entry_id`).
+    pub keep_page: RefCell<String>,
+    /// Kept copies stored by this page, and the design revision each holds once its write ended.
+    pub kept: RefCell<std::collections::HashMap<String, Option<u64>>>,
+    /// Kept copies being written or removed now (one browser call at a time per copy).
+    pub keeping: RefCell<std::collections::HashSet<String>>,
+    /// When (ms) the last write of a copy failed, to wait before trying again (`keep::may_write`).
+    pub kept_failed: RefCell<std::collections::HashMap<String, f64>>,
+    /// Copies earlier pages left, newer than their design's last save: offered at start.
+    pub keep_offered: RefCell<Vec<keep::Entry>>,
 }

 impl Files {
@@ -288,6 +299,9 @@ pub fn start(files: &Rc<Files>) {
            let _ = JsFuture::from(p).await;
        });
    }
+    let page = keep::page_id(js_sys::Date::now(), js_sys::Math::random());
+    hold_page_lock(&page);
+    *files.keep_page.borrow_mut() = page;
    let files = files.clone();
    spawn_local(async move {
        match disk::known_ids().await {
@@ -300,6 +314,7 @@ pub fn start(files: &Rc<Files>) {
                    files.say("This page can't use the browser's file storage (it needs https or localhost): designs are kept in local storage, a few MB at most.", false);
                }
                let mut entries = Vec::new();
+                let kept = kept_copies(&all);
                let has_recovery = all.iter().any(|(n, _, _)| n == RECOVERY);
                let legacy = (!has_recovery).then(|| LEGACY_RECOVERY.into_iter().find(|l| all.iter().any(|(n, _, _)| n == l))).flatten();
                for (name, bytes, modified) in all {
@@ -315,7 +330,7 @@ pub fn start(files: &Rc<Files>) {
                        *files.recovery.borrow_mut() = Some((n, meta["path"].as_str().map(str::to_string)));
                        continue;
                    }
-                    if name != RECOVERY {
+                    if name != RECOVERY && keep::parse_name(&name).is_none() {
                        entries.push(Entry { name: name.clone(), size: bytes.len() as u64, modified });
                    }
                    vfs::insert(&format!("{OPFS}{name}"), bytes);
@@ -326,6 +341,7 @@ pub fn start(files: &Rc<Files>) {
                if !vfs::exists(&format!("{OPFS}{RECOVERY}")) {
                    *files.recovery.borrow_mut() = None;
                }
+                sort_kept(&files, kept, &live_pages().await);
            }
            Err(e) => files.say(format!("browser storage: {e}"), true),
        }
@@ -343,7 +359,7 @@ pub fn flush(files: &Rc<Files>) {
                {
                    let mut e = files.entries.borrow_mut();
                    e.retain(|x| x.name != name);
-                    if name != RECOVERY && name != RECOVERY_META {
+                    if name != RECOVERY && name != RECOVERY_META && keep::parse_name(&name).is_none() {
                        e.push(Entry { name: name.clone(), size: bytes.len() as u64, modified: js_sys::Date::now() });
                        e.sort_by_key(|a| a.name.to_lowercase());
                    }
@@ -473,7 +489,15 @@ pub fn recovery_path() -> String {
 /// A recovery file lives in OPFS, but its relative links belong to the original design's
 /// folder (which can be on disk). Resolve them before Open sees the temporary file location.
 pub fn prepare_recovery(original_path: Option<&str>) -> Result<String, String> {
-    let path = recovery_path();
+    prepare_copy(recovery_path(), original_path)
+}
+
+/// The same for a kept copy (#10220).
+pub fn prepare_kept(id: &str, original_path: Option<&str>) -> Result<String, String> {
+    prepare_copy(format!("{OPFS}{}", keep::design_file(id)), original_path)
+}
+
+fn prepare_copy(path: String, original_path: Option<&str>) -> Result<String, String> {
    let bytes = vfs::read(&path, solidcraft_engine::io::MAX_DESIGN_BYTES).map_err(|e| e.to_string())?;
    let mut doc = solidcraft_engine::io::read_design(&bytes).map_err(|e| e.to_string())?;
    solidcraft_engine::resolve_design_links(&mut doc, original_path);
@@ -646,3 +670,149 @@ pub fn take_drops(files: &Rc<Files>, raw: &mut egui::RawInput, theme: bool) {
        });
    }
 }
+
+/// Hold this page's browser lock while it runs, so other tabs know its kept copies are in use
+/// (`keep.rs`). Browsers without the Web Locks API hold none; their copies are then offered by
+/// any later page.
+fn hold_page_lock(page: &str) {
+    let Some(locks) = web_locks() else { return };
+    let Ok(request) = Reflect::get(&locks, &"request".into()).and_then(|f| f.dyn_into::<Function>().map_err(JsValue::from)) else { return };
+    // A promise that never settles: the lock is let go only when the page goes.
+    let hold = Closure::<dyn FnMut(JsValue) -> js_sys::Promise>::new(|_lock: JsValue| js_sys::Promise::new(&mut |_, _| {}));
+    let name = format!("{}{page}", keep::LOCK_PREFIX);
+    if let Err(e) = request.call2(&locks, &name.into(), hold.as_ref().unchecked_ref()) {
+        log::info!("keep: no page lock: {}", err(e));
+    }
+    // The callback lives as long as the page.
+    hold.forget();
+}
+
+fn web_locks() -> Option<JsValue> {
+    let nav = web_sys::window()?.navigator();
+    Reflect::get(&nav, &"locks".into()).ok().filter(|l| l.is_object())
+}
+
+/// The pages still open (in this browser profile) that hold their lock.
+async fn live_pages() -> Vec<String> {
+    let query = async {
+        let locks = web_locks().ok_or("no Web Locks")?;
+        let f: Function = Reflect::get(&locks, &"query".into()).map_err(err)?.dyn_into().map_err(|_| "no query".to_string())?;
+        let p: js_sys::Promise = f.call0(&locks).map_err(err)?.dyn_into().map_err(|_| "no promise".to_string())?;
+        let state = JsFuture::from(p).await.map_err(err)?;
+        let held: Array = Reflect::get(&state, &"held".into()).map_err(err)?.dyn_into().map_err(|_| "no list".to_string())?;
+        Ok::<_, String>(
+            held.iter()
+                .take(10_000)
+                .filter_map(|l| Reflect::get(&l, &"name".into()).ok()?.as_string())
+                .filter_map(|n| n.strip_prefix(keep::LOCK_PREFIX).map(str::to_string))
+                .collect(),
+        )
+    };
+    query.await.unwrap_or_else(|e| {
+        log::info!("keep: open pages unknown ({e})");
+        Vec::new()
+    })
+}
+
+/// The kept copies among the stored files: (copy, when its design's file was last written), and
+/// the ids of designs stored without their metadata.
+struct Found {
+    copies: Vec<(keep::Entry, Option<f64>)>,
+    orphans: Vec<String>,
+}
+
+fn kept_copies(all: &[(String, Vec<u8>, f64)]) -> Found {
+    let modified = |path: &str| path.strip_prefix(OPFS).and_then(|n| all.iter().find(|(name, _, _)| name == n)).map(|(_, _, m)| *m);
+    let mut copies = Vec::new();
+    let mut designs = Vec::new();
+    for (name, bytes, _) in all {
+        match keep::parse_name(name) {
+            Some((id, keep::Part::Meta)) => {
+                if let Some(e) = keep::Entry::parse(id, bytes) {
+                    let saved = e.path.as_deref().and_then(modified);
+                    copies.push((e, saved));
+                }
+            }
+            Some((id, keep::Part::Design)) => designs.push(id.to_string()),
+            None => {}
+        }
+    }
+    // A copy is whole only with its design.
+    copies.retain(|(e, _)| designs.contains(&e.id));
+    let orphans = designs.into_iter().filter(|id| !copies.iter().any(|(e, _)| &e.id == id)).collect();
+    Found { copies, orphans }
+}
+
+/// Offer the copies earlier pages left that hold unsaved work, and remove those their design's
+/// later save made stale (and parts without the rest), leaving open pages' copies alone.
+fn sort_kept(files: &Rc<Files>, found: Found, live: &[String]) {
+    let mut offered = Vec::new();
+    let mut gone = Vec::new();
+    for (e, saved) in found.copies {
+        match keep::fate(&e, live, saved) {
+            keep::Fate::Offer => offered.push(e),
+            keep::Fate::Drop => gone.push(e.id),
+            keep::Fate::Leave => {}
+        }
+    }
+    gone.extend(found.orphans.into_iter().filter(|id| !keep::page_of(id).is_some_and(|p| live.iter().any(|l| l == p))));
+    keep::order_offered(&mut offered);
+    *files.keep_offered.borrow_mut() = offered;
+    for id in gone {
+        remove_kept(files, &id);
+    }
+}
+
+/// The path (in the engine's files) a kept copy opens from.
+pub fn kept_path(id: &str) -> String {
+    format!("{OPFS}{}", keep::design_file(id))
+}
+
+/// Write the copy of a design with unsaved changes (`bytes`, described by `entry`) that holds
+/// its revision `revision`. Its metadata goes last, so a copy is never offered half written.
+pub fn write_kept(files: &Rc<Files>, entry: &keep::Entry, bytes: Vec<u8>, revision: u64) {
+    let id = entry.id.clone();
+    if !files.keeping.borrow_mut().insert(id.clone()) {
+        return;
+    }
+    files.kept.borrow_mut().entry(id.clone()).or_insert(None);
+    let meta = entry.to_json();
+    let files = files.clone();
+    spawn_local(async move {
+        let r = async {
+            write_file(&keep::design_file(&id), &bytes).await?;
+            write_file(&keep::meta_file(&id), meta.as_bytes()).await
+        };
+        match r.await {
+            Ok(()) => {
+                files.kept.borrow_mut().insert(id.clone(), Some(revision));
+                files.kept_failed.borrow_mut().remove(&id);
+            }
+            Err(e) => {
+                files.kept_failed.borrow_mut().insert(id.clone(), js_sys::Date::now());
+                files.say(format!("keeping unsaved work in this browser: {e}"), true)
+            }
+        }
+        files.keeping.borrow_mut().remove(&id);
+        files.wake();
+    });
+}
+
+/// Remove kept copy `id` (its design was saved, closed, discarded or restored).
+pub fn remove_kept(files: &Rc<Files>, id: &str) {
+    let id = id.to_string();
+    if !files.keeping.borrow_mut().insert(id.clone()) {
+        return;
+    }
+    let _ = vfs::remove(&kept_path(&id));
+    files.kept_failed.borrow_mut().remove(&id);
+    let files = files.clone();
+    spawn_local(async move {
+        // The metadata first: what's left without it is never offered.
+        let _ = remove_file(&keep::meta_file(&id)).await;
+        let _ = remove_file(&keep::design_file(&id)).await;
+        files.kept.borrow_mut().remove(&id);
+        files.keeping.borrow_mut().remove(&id);
+        files.wake();
+    });
+}
@@ -0,0 +1,360 @@
+//! Keep unsaved work in this browser (#10220): the decisions, in plain Rust (tested natively).
+//!
+//! With Preferences › General › "Keep unsaved work in this browser instead of asking when the tab
+//! closes" on, each open design with unsaved changes has a copy in the browser's private storage:
+//! `keep-<id>.sc` (the design) and `keep-<id>.json` (its name, its file and when it last
+//! changed). The copy is written shortly after each change ([`due`]) and again when the page is
+//! hidden, so it is already current when the tab closes; the page then doesn't ask through the
+//! browser's "leave site?" box ([`asks_before_unload`]). A design that is saved, closed or
+//! discarded has its copy removed. The next visit offers the copies newer than their design's
+//! last save ([`fate`]) in SolidCraft's own window, answered with [`plan`].
+//!
+//! An id is `<page>-<n>`: the page that wrote it (each page load has its own) and the design's
+//! number in that page. A page holds a browser lock named after it while it runs, so another tab
+//! never offers, or removes, the copies of a page that is still open.
+#![cfg_attr(not(target_arch = "wasm32"), allow(dead_code))]
+
+use serde_json::{Value, json};
+
+/// The start of every kept file's name.
+pub const PREFIX: &str = "keep-";
+/// The browser lock a page holds while it runs: this, then its page id.
+pub const LOCK_PREFIX: &str = "solidcraft.keep.";
+/// A copy is written once the design has been still this long (ms)…
+pub const QUIET_MS: f64 = 800.0;
+/// …or at the latest this long after the first change it doesn't hold yet (ms).
+pub const MAX_WAIT_MS: f64 = 4000.0;
+/// The most copies offered at once (the rest wait for the next visit).
+pub const MAX_OFFERED: usize = 32;
+const MAX_ID: usize = 64;
+const MAX_NAME: usize = 256;
+const MAX_PATH: usize = 4096;
+/// Copies' metadata is small: a damaged or hostile one is not read.
+pub const MAX_META_BYTES: usize = 64 * 1024;
+
+/// Ids are short and safe in a file name: ASCII letters, digits and dashes, with a page part.
+pub fn valid_id(id: &str) -> bool {
+    !id.is_empty() && id.len() <= MAX_ID && id.chars().all(|c| c.is_ascii_alphanumeric() || c == '-') && page_of(id).is_some()
+}
+
+/// The page that wrote copy `id`.
+pub fn page_of(id: &str) -> Option<&str> {
+    id.rsplit_once('-').map(|(page, _)| page).filter(|p| !p.is_empty())
+}
+
+/// This page's id, from the time it started (ms since 1970) and a random number in 0..1:
+/// letters and digits only.
+pub fn page_id(now_ms: f64, random: f64) -> String {
+    let now = if now_ms.is_finite() && now_ms > 0.0 { now_ms.min(1e15) as u64 } else { 0 };
+    let random = if random.is_finite() { (random.clamp(0.0, 1.0) * f64::from(0xff_ffff)) as u64 } else { 0 };
+    format!("{now:x}{random:06x}")
+}
+
+/// The copy of design `uid` (`Session::uid`) open in page `page`.
+pub fn entry_id(page: &str, uid: u64) -> String {
+    format!("{page}-{uid}")
+}
+
+/// The stored file names of copy `id`: its design and its metadata.
+pub fn design_file(id: &str) -> String {
+    format!("{PREFIX}{id}.{}", solidcraft_engine::io::DESIGN_EXT)
+}
+pub fn meta_file(id: &str) -> String {
+    format!("{PREFIX}{id}.json")
+}
+
+/// Which part of a copy a stored file is.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub enum Part {
+    Design,
+    Meta,
+}
+
+/// A stored file's copy id and part; `None` for every other file.
+pub fn parse_name(name: &str) -> Option<(&str, Part)> {
+    let rest = name.strip_prefix(PREFIX)?;
+    let (id, part) = if let Some(id) = rest.strip_suffix(".json") {
+        (id, Part::Meta)
+    } else {
+        (rest.strip_suffix(solidcraft_engine::io::DESIGN_EXT)?.strip_suffix('.')?, Part::Design)
+    };
+    valid_id(id).then_some((id, part))
+}
+
+/// A kept copy, as its metadata describes it.
+#[derive(Clone, Debug, PartialEq)]
+pub struct Entry {
+    pub id: String,
+    /// The design's name.
+    pub name: String,
+    /// Its file (`None`: never saved).
+    pub path: Option<String>,
+    /// When the design last changed (ms since 1970).
+    pub changed_at: f64,
+}
+
+impl Entry {
+    pub fn to_json(&self) -> String {
+        json!({"name": self.name, "path": self.path, "changed_at": self.changed_at}).to_string()
+    }
+
+    /// Read copy `id`'s metadata. Anything malformed, oversized or not finite is no copy.
+    pub fn parse(id: &str, bytes: &[u8]) -> Option<Entry> {
+        if !valid_id(id) || bytes.len() > MAX_META_BYTES {
+            return None;
+        }
+        let v: Value = serde_json::from_slice(bytes).ok()?;
+        let name = v.get("name")?.as_str()?.chars().take(MAX_NAME).collect::<String>();
+        let path = match v.get("path") {
+            None | Some(Value::Null) => None,
+            Some(p) => Some(p.as_str().filter(|p| !p.is_empty() && p.len() <= MAX_PATH)?.to_string()),
+        };
+        let changed_at = v.get("changed_at")?.as_f64().filter(|t| t.is_finite() && *t >= 0.0)?;
+        Some(Entry { id: id.to_string(), name, path, changed_at })
+    }
+}
+
+/// Whether a copy that last changed at `changed_at` holds work its design's file doesn't:
+/// the file was last written at `saved_at` (ms since 1970; `None` or unknown: never saved, or
+/// the time can't be read, so the copy is kept rather than lost).
+pub fn newer_than_save(changed_at: f64, saved_at: Option<f64>) -> bool {
+    match saved_at {
+        Some(saved) if saved.is_finite() && saved > 0.0 => changed_at > saved,
+        _ => true,
+    }
+}
+
+/// What the next visit does with a copy it finds.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub enum Fate {
+    /// Offer it: "Restore unsaved design…?".
+    Offer,
+    /// Its design was saved after it: remove it without asking.
+    Drop,
+    /// Its page is still open (another tab): leave it alone.
+    Leave,
+}
+
+/// The copy `entry`, whose design's file was last written at `saved_at`, while the pages
+/// `live` are open.
+pub fn fate(entry: &Entry, live: &[String], saved_at: Option<f64>) -> Fate {
+    if page_of(&entry.id).is_some_and(|p| live.iter().any(|l| l == p)) {
+        Fate::Leave
+    } else if newer_than_save(entry.changed_at, saved_at) {
+        Fate::Offer
+    } else {
+        Fate::Drop
+    }
+}
+
+/// Copies to offer first: the most recently changed, at most [`MAX_OFFERED`].
+pub fn order_offered(entries: &mut Vec<Entry>) {
+    entries.sort_by(|a, b| b.changed_at.total_cmp(&a.changed_at).then_with(|| a.id.cmp(&b.id)));
+    entries.truncate(MAX_OFFERED);
+}
+
+/// Whether a design's copy is due to be written at `now`: the design last changed at
+/// `last_change`, and the copy has lacked a change since `first_unwritten` (all ms).
+pub fn due(now: f64, first_unwritten: f64, last_change: f64) -> bool {
+    now - last_change >= QUIET_MS || now - first_unwritten >= MAX_WAIT_MS
+}
+
+/// How long after a failed write of a design's copy it isn't tried again (ms).
+pub const RETRY_MS: f64 = 30_000.0;
+
+/// Whether a copy whose write last failed at `failed_at` (ms; `None`: it hasn't) may be written
+/// at `now`: not before [`RETRY_MS`] has passed, so a full or denied store isn't hit every tick.
+pub fn may_write(now: f64, failed_at: Option<f64>) -> bool {
+    failed_at.is_none_or(|t| !(now >= t) || now - t >= RETRY_MS)
+}
+
+/// Whether `wanted` is the design now open, given the open design's path.
+pub fn is_open(open: Option<&str>, wanted: &str) -> bool {
+    open == Some(wanted)
+}
+
+/// Whether leaving the page asks through the browser's "leave site?" box: there is unsaved work,
+/// and either the user still wants to be asked or it isn't all kept in the browser yet (with the
+/// keep preference off it never is, so there the box always stays).
+pub fn asks_before_unload(persists: bool, keep: bool, also_ask: bool, any_unsaved: bool, all_kept: bool) -> bool {
+    persists && any_unsaved && (also_ask || !(keep && all_kept))
+}
+
+/// An answer in the "Restore unsaved design?" window.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub enum Answer {
+    /// Open the copy, with its unsaved changes, as the design it was (saving goes to its file).
+    Restore,
+    /// Open the design's file as last saved; the copy goes.
+    OpenSaved,
+    /// The copy goes.
+    Discard,
+}
+
+/// What an answer does.
+#[derive(Clone, Debug, PartialEq, Eq)]
+pub struct Plan {
+    /// Open the copy (and, once it is open, give it back its name and file).
+    pub open_copy: bool,
+    /// Open this saved file.
+    pub open_saved: Option<String>,
+    /// Remove the copy.
+    pub drop_copy: bool,
+}
+
+/// What `answer` does to copy `entry`; `saved_exists`: its file can still be opened. `None`: the
+/// answer isn't offered for it (Open saved version of a design never saved, or gone).
+pub fn plan(answer: Answer, entry: &Entry, saved_exists: bool) -> Option<Plan> {
+    match answer {
+        Answer::Restore => Some(Plan { open_copy: true, open_saved: None, drop_copy: true }),
+        Answer::OpenSaved => {
+            let path = entry.path.clone().filter(|_| saved_exists)?;
+            Some(Plan { open_copy: false, open_saved: Some(path), drop_copy: true })
+        }
+        Answer::Discard => Some(Plan { open_copy: false, open_saved: None, drop_copy: true }),
+    }
+}
+
+/// The answers the window offers for `entry`, in order.
+pub fn answers(entry: &Entry, saved_exists: bool) -> Vec<Answer> {
+    [Answer::Restore, Answer::OpenSaved, Answer::Discard].into_iter().filter(|a| plan(*a, entry, saved_exists).is_some()).collect()
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    fn entry(id: &str, changed_at: f64, path: Option<&str>) -> Entry {
+        Entry { id: id.into(), name: "Bracket".into(), path: path.map(str::to_string), changed_at }
+    }
+
+    #[test]
+    fn a_failed_write_waits_before_the_next_try() {
+        assert!(may_write(1000.0, None));
+        assert!(!may_write(1000.0 + RETRY_MS - 1.0, Some(1000.0)));
+        assert!(may_write(1000.0 + RETRY_MS, Some(1000.0)));
+        // A clock that went back doesn't block for good.
+        assert!(may_write(10.0, Some(1000.0)));
+    }
+
+    #[test]
+    fn a_design_counts_as_opened_only_at_its_own_path() {
+        assert!(is_open(Some("a.sc"), "a.sc"));
+        assert!(!is_open(Some("b.sc"), "a.sc"));
+        assert!(!is_open(None, "a.sc"));
+    }
+
+    #[test]
+    fn copies_are_named_by_page_and_design_and_nothing_else_reads_as_one() {
+        let page = page_id(1_700_000_000_000.0, 0.5);
+        assert!(page.chars().all(|c| c.is_ascii_hexdigit()));
+        let id = entry_id(&page, 7);
+        assert!(valid_id(&id));
+        assert_eq!(page_of(&id), Some(page.as_str()));
+        assert_eq!(parse_name(&design_file(&id)), Some((id.as_str(), Part::Design)));
+        assert_eq!(parse_name(&meta_file(&id)), Some((id.as_str(), Part::Meta)));
+        for other in ["part.sc", "recovery.sc", "recovery.json", "keep-.sc", "keep-x.sc", "keep-a/b-1.sc", "keep-a-1.step", "keep-a-1sc"] {
+            assert_eq!(parse_name(other), None, "{other}");
+        }
+        // Hostile clocks still give a usable id.
+        for (now, random) in [(f64::NAN, f64::NAN), (f64::INFINITY, -1.0), (-5.0, 9.0)] {
+            assert!(valid_id(&entry_id(&page_id(now, random), 1)));
+        }
+    }
+
+    #[test]
+    fn metadata_round_trips_and_hostile_metadata_is_no_copy() {
+        let e = entry("a1-3", 1234.0, Some("/opfs/Bracket.sc"));
+        assert_eq!(Entry::parse("a1-3", e.to_json().as_bytes()), Some(e.clone()));
+        let never_saved = entry("a1-4", 99.0, None);
+        assert_eq!(Entry::parse("a1-4", never_saved.to_json().as_bytes()), Some(never_saved));
+        for bad in [
+            "",
+            "[]",
+            r#"{"name":"x","changed_at":"soon"}"#,
+            r#"{"name":"x","changed_at":-1}"#,
+            r#"{"name":"x","changed_at":1e999}"#,
+            r#"{"name":"x","path":7,"changed_at":1}"#,
+            r#"{"name":"x","path":"","changed_at":1}"#,
+            r#"{"changed_at":1}"#,
+        ] {
+            assert_eq!(Entry::parse("a1-3", bad.as_bytes()), None, "{bad}");
+        }
+        assert_eq!(Entry::parse("../x", e.to_json().as_bytes()), None);
+        assert_eq!(Entry::parse("a1-3", &vec![b' '; MAX_META_BYTES + 1]), None);
+        let long = json!({"name": "n".repeat(10_000), "changed_at": 1}).to_string();
+        assert_eq!(Entry::parse("a1-3", long.as_bytes()).map(|e| e.name.len()), Some(MAX_NAME));
+    }
+
+    #[test]
+    fn a_copy_newer_than_the_last_save_is_offered_an_older_one_dropped_an_open_pages_left() {
+        let e = entry("p1-1", 2000.0, Some("/opfs/Bracket.sc"));
+        // Changed after the file was last written: offered.
+        assert_eq!(fate(&e, &[], Some(1000.0)), Fate::Offer);
+        // Saved since (in this tab or another): nothing to offer.
+        assert_eq!(fate(&e, &[], Some(2000.0)), Fate::Drop);
+        assert_eq!(fate(&e, &[], Some(3000.0)), Fate::Drop);
+        // Never saved, or the save time can't be read: kept rather than lost.
+        for saved in [None, Some(0.0), Some(f64::NAN), Some(f64::INFINITY), Some(-4.0)] {
+            assert_eq!(fate(&e, &[], saved), Fate::Offer, "{saved:?}");
+        }
+        // Its page is still open in another tab: neither offered nor removed.
+        assert_eq!(fate(&e, &["p1".into()], Some(1000.0)), Fate::Leave);
+        assert_eq!(fate(&e, &["p1".into()], Some(3000.0)), Fate::Leave);
+        assert_eq!(fate(&e, &["p2".into()], Some(1000.0)), Fate::Offer);
+    }
+
+    #[test]
+    fn the_newest_copies_are_offered_first_and_at_most_a_windowful() {
+        let mut list: Vec<Entry> = (0..40).map(|i| entry(&format!("p-{i}"), f64::from(i), None)).collect();
+        order_offered(&mut list);
+        assert_eq!(list.len(), MAX_OFFERED);
+        assert_eq!(list.first().map(|e| e.id.as_str()), Some("p-39"));
+    }
+
+    #[test]
+    fn a_copy_is_written_once_the_design_is_still_or_after_the_longest_wait() {
+        // Still changing, not waited long: not yet.
+        assert!(!due(1000.0, 900.0, 900.0));
+        // Still for QUIET_MS: due.
+        assert!(due(900.0 + QUIET_MS, 900.0, 900.0));
+        // Changing all the time: due after MAX_WAIT_MS anyway.
+        assert!(!due(5000.0, 2000.0, 4900.0));
+        assert!(due(2000.0 + MAX_WAIT_MS, 2000.0, 2000.0 + MAX_WAIT_MS - 1.0));
+    }
+
+    #[test]
+    fn the_browser_asks_before_unload_unless_told_not_to_and_every_copy_is_current() {
+        // Keeping off: exactly as before, unsaved work asks, whatever the second option says.
+        assert!(asks_before_unload(true, false, true, true, true));
+        assert!(asks_before_unload(true, false, true, true, false));
+        assert!(asks_before_unload(true, false, false, true, true));
+        // Keeping on, asking on (the default): both, the box and the copy.
+        assert!(asks_before_unload(true, true, true, true, true));
+        // Keeping on, asking off, every unsaved design kept: no browser box.
+        assert!(!asks_before_unload(true, true, false, true, true));
+        // Keeping on, asking off, a copy still being written (or failed): the browser still asks.
+        assert!(asks_before_unload(true, true, false, true, false));
+        // Nothing unsaved, or an embedded page that keeps nothing: never.
+        assert!(!asks_before_unload(true, true, true, false, false));
+        assert!(!asks_before_unload(true, false, true, false, false));
+        assert!(!asks_before_unload(false, false, true, true, false));
+    }
+
+    #[test]
+    fn restore_open_saved_and_discard_each_do_one_thing_and_always_remove_the_copy() {
+        let saved = entry("p-1", 5.0, Some("/opfs/Bracket.sc"));
+        assert_eq!(plan(Answer::Restore, &saved, true), Some(Plan { open_copy: true, open_saved: None, drop_copy: true }));
+        assert_eq!(
+            plan(Answer::OpenSaved, &saved, true),
+            Some(Plan { open_copy: false, open_saved: Some("/opfs/Bracket.sc".into()), drop_copy: true })
+        );
+        assert_eq!(plan(Answer::Discard, &saved, true), Some(Plan { open_copy: false, open_saved: None, drop_copy: true }));
+        assert_eq!(answers(&saved, true), [Answer::Restore, Answer::OpenSaved, Answer::Discard]);
+        // A design never saved, or whose file is gone, has no saved version to open.
+        let never = entry("p-2", 5.0, None);
+        assert_eq!(plan(Answer::OpenSaved, &never, true), None);
+        assert_eq!(plan(Answer::OpenSaved, &saved, false), None);
+        assert_eq!(answers(&never, false), [Answer::Restore, Answer::Discard]);
+    }
+}
@@ -48,7 +48,7 @@ impl Download {
        }
        if solidcraft_ui_egui::documents::any_dirty(app) {
            let mut answer = None;
-            let closed = ui_kit::Window::new(egui::Id::new("open_link"), "status_warning", solidcraft_ui_egui::i18n::tr("web.open_link"))
+            let closed = ui_kit::Window::new(egui::Id::unique("open_link"), "status_warning", solidcraft_ui_egui::i18n::tr("web.open_link"))
                .required()
                .show_body(ctx, |ui| {
                    ui.label(solidcraft_ui_egui::i18n::tr("web.open_link_confirm"));
@@ -3,7 +3,8 @@
 //! Runs the same [`solidcraft_ui_egui::SolveApp`] as the desktop app through eframe's web runner
 //! (wgpu: WebGPU where available, WebGL2 otherwise). Build with `trunk build --release` from this
 //! directory (output in `dist/web`). URL flags: `?webgl` forces WebGL2 (remembered until
-//! `?webgpu`), `?sample` opens the sample part.
+//! `?webgpu`), `?sample` opens the sample part, `?embed=editor` runs it as an editing embed in a
+//! host page (no application bar or start page; nothing kept in the browser; #8517).
 #![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]

 #[cfg(target_arch = "wasm32")]
@@ -18,6 +19,8 @@ mod easyprint;
 mod files;
 #[cfg(target_arch = "wasm32")]
 mod install;
+#[cfg(any(target_arch = "wasm32", test))]
+mod keep;
 #[cfg(target_arch = "wasm32")]
 mod linked;
 #[cfg(any(target_arch = "wasm32", test))]
@@ -42,6 +45,8 @@ fn query_flag(query: &str, name: &str) -> bool {
 struct Launch {
    open: Option<String>,
    embed: bool,
+    /// `?embed=editor` (#8517): an editing embed in a host page that keeps the files itself.
+    editor: bool,
 }

 #[cfg(any(target_arch = "wasm32", test))]
@@ -52,16 +57,19 @@ impl Launch {
        for (key, value) in url::form_urlencoded::parse(query.trim_start_matches('?').as_bytes()) {
            match key.as_ref() {
                "open" if launch.open.is_none() => launch.open = Some(value.into_owned()),
+                "embed" if value == "editor" => launch.editor = true,
                "embed" => embed = true,
                _ => {}
            }
        }
-        launch.embed = embed && launch.open.is_some();
+        launch.embed = embed && launch.open.is_some() && !launch.editor;
        launch
    }

+    /// The browser's own storage (designs, autosave, recovery, preferences) is used: not when
+    /// embedded, where the host keeps what is kept.
    fn persists(&self) -> bool {
-        !self.embed
+        !self.embed && !self.editor
    }

    fn full_app_url(&self, mut url: url::Url) -> String {
@@ -171,12 +179,14 @@ mod web {

    use solidcraft_engine::Session;
    use solidcraft_engine::io::vfs;
+    use solidcraft_ui_egui::ui_kit::BackingTooltipExt as _;
    use solidcraft_ui_egui::{Services, SolveApp, ui_kit};
    use wasm_bindgen::JsCast as _;

    use crate::api::Api;
    use crate::disk::{self, SaveTarget};
    use crate::files::{self, Files, Intent};
+    use crate::keep;
    use crate::space_mouse::SpaceMouse;

    const CANVAS_ID: &str = "solidcraft_canvas";
@@ -236,7 +246,9 @@ mod web {
    }

    /// The browser's "leave site? changes you made may not be saved" prompt while a design has
-    /// unsaved changes (the page can't show its own dialog when it is being closed).
+    /// unsaved changes (the page can't show its own dialog when it is being closed). With "keep
+    /// unsaved work in this browser" on and "still ask" off, there is nothing to ask once every
+    /// unsaved design's copy is current (`keep::asks_before_unload`, #10220).
    fn ask_before_unload(window: &web_sys::Window) {
        let on_unload = wasm_bindgen::closure::Closure::<dyn FnMut(web_sys::BeforeUnloadEvent)>::new(|e: web_sys::BeforeUnloadEvent| {
            if UNSAVED.with(std::cell::Cell::get) {
@@ -249,6 +261,50 @@ mod web {
        on_unload.forget();
    }

+    /// With "keep unsaved work in this browser" on, the page brings every unsaved design's copy up
+    /// to date when it is hidden or goes (`pagehide`, `visibilitychange`): the browser may not
+    /// wait for that write, so the copies are written shortly after each change as well
+    /// (`Shell::keep_tick`, #10220).
+    fn keep_when_hidden(window: &web_sys::Window, runner: &eframe::WebRunner) {
+        let keep_now = {
+            let runner = runner.clone();
+            move || {
+                if let Some(mut shell) = runner.app_mut::<Shell>() {
+                    shell.keep_tick(None, true);
+                }
+            }
+        };
+        let on_hide = {
+            let keep_now = keep_now.clone();
+            wasm_bindgen::closure::Closure::<dyn FnMut(web_sys::Event)>::new(move |_: web_sys::Event| keep_now())
+        };
+        let on_visibility = wasm_bindgen::closure::Closure::<dyn FnMut(web_sys::Event)>::new(move |_: web_sys::Event| {
+            let hidden = web_sys::window()
+                .and_then(|w| w.document())
+                .and_then(|d| js_sys::Reflect::get(&d, &"visibilityState".into()).ok())
+                .and_then(|v| v.as_string())
+                .is_some_and(|v| v == "hidden");
+            if hidden {
+                keep_now();
+            }
+        });
+        let _ = window.add_event_listener_with_callback("pagehide", on_hide.as_ref().unchecked_ref());
+        if let Some(document) = window.document() {
+            let _ = document.add_event_listener_with_callback("visibilitychange", on_visibility.as_ref().unchecked_ref());
+        }
+        // The listeners live as long as the page.
+        on_hide.forget();
+        on_visibility.forget();
+    }
+
+    /// One open design followed for its kept copy: its revision, when that last changed, and since
+    /// when its copy has lacked a change (`None`: current, or being written).
+    struct Track {
+        revision: u64,
+        last_change: f64,
+        first_unwritten: Option<f64>,
+    }
+
    /// eframe cancels the browser's action for every Tab it gets, so the browser couldn't switch
    /// tabs while the app has the keyboard. Its tab-switching keys stop here, on the way down to
    /// the canvas, before eframe sees them; the browser then acts on them as usual.
@@ -321,6 +377,10 @@ mod web {
        /// The settings this tab wrote or loaded last, and those another tab wrote since (#8644).
        prefs_writer: crate::PrefsWriter,
        other_tab_prefs: PrefsInbox,
+        /// The open designs followed for their kept copy, by `Session::uid` (#10220).
+        keep_track: std::collections::HashMap<u64, Track>,
+        /// Every unsaved design's kept copy is current (and the preference is on).
+        all_kept: bool,
    }

    impl Shell {
@@ -435,8 +495,14 @@ mod web {
                self.sync_recents();
            }
            let now = ctx.input(|i| i.time);
+            // With "keep unsaved work in this browser" on, each design's own copy takes over from
+            // the single autosave (#10220).
+            if self.app.preferences.keep_unsaved_in_browser && self.autosaved.is_some() {
+                files::autosave(&self.files, None);
+                self.autosaved = None;
+            }
            // Unsaved work is kept (at most every AUTOSAVE_S); saved work needs no autosave.
-            if self.files.ready.get() && self.files.recovery.borrow().is_none() {
+            if self.files.ready.get() && self.files.recovery.borrow().is_none() && !self.app.preferences.keep_unsaved_in_browser {
                let s = &self.app.session;
                let changed = s.is_dirty() && self.autosaved != Some(s.revision);
                let wait = AUTOSAVE_S - (now - self.autosaved_at);
@@ -455,6 +521,175 @@ mod web {
            if !self.files.ready.get() || !self.files.incoming.borrow().is_empty() {
                ctx.request_repaint_after(std::time::Duration::from_millis(100));
            }
+            self.all_kept = self.keep_tick(Some(ctx), false);
+        }
+
+        /// Keep each open design's unsaved changes in the browser, when the preference asks for
+        /// it: a design's copy is written once it has been still a moment (`keep::due`), or at
+        /// once with `now` (the page is being hidden); a copy whose design is saved or closed, or
+        /// with the preference off, goes. Answers whether every unsaved design's copy is current.
+        fn keep_tick(&mut self, ctx: Option<&egui::Context>, now: bool) -> bool {
+            if !self.launch.persists() || !self.files.ready.get() {
+                return false;
+            }
+            let Shell { app, files, keep_track, .. } = self;
+            let on = app.preferences.keep_unsaved_in_browser;
+            let time = js_sys::Date::now();
+            let page = files.keep_page.borrow().clone();
+            let mut wanted = std::collections::HashSet::new();
+            let mut all_kept = true;
+            let mut wake: Option<f64> = None;
+            let mut error = None;
+            let mut soon = |ms: f64| wake = Some(wake.map_or(ms, |w: f64| w.min(ms)));
+            if on {
+                for s in solidcraft_ui_egui::documents::open_sessions(app).into_iter().filter(|s| s.is_dirty()) {
+                    let id = keep::entry_id(&page, s.uid);
+                    wanted.insert(s.uid);
+                    let t = keep_track.entry(s.uid).or_insert(Track { revision: s.revision, last_change: time, first_unwritten: None });
+                    if t.revision != s.revision {
+                        t.revision = s.revision;
+                        t.last_change = time;
+                    }
+                    if files.kept.borrow().get(&id).copied().flatten() == Some(s.revision) {
+                        t.first_unwritten = None;
+                        continue;
+                    }
+                    all_kept = false;
+                    if files.keeping.borrow().contains(&id) {
+                        soon(100.0);
+                        continue;
+                    }
+                    let first = *t.first_unwritten.get_or_insert(time);
+                    let failed = files.kept_failed.borrow().get(&id).copied();
+                    if !keep::may_write(time, failed) {
+                        // The last write failed: try again after a while.
+                        soon(keep::RETRY_MS);
+                        continue;
+                    }
+                    if now || keep::due(time, first, t.last_change) {
+                        match solidcraft_engine::io::write_design_container(&s.design()) {
+                            Ok(bytes) => {
+                                let entry = keep::Entry { id, name: s.doc.name.clone(), path: s.path.clone(), changed_at: t.last_change };
+                                files::write_kept(files, &entry, bytes, s.revision);
+                                t.first_unwritten = None;
+                            }
+                            Err(e) => {
+                                files.kept_failed.borrow_mut().insert(id, time);
+                                error = Some(format!("keeping unsaved work in this browser: {e}"));
+                            }
+                        }
+                        soon(100.0);
+                    } else {
+                        soon((keep::QUIET_MS - (time - t.last_change)).min(keep::MAX_WAIT_MS - (time - first)).max(16.0));
+                    }
+                }
+            }
+            // This page's copies no design needs any more: saved, closed, or the preference off.
+            let stale: Vec<String> = files
+                .kept
+                .borrow()
+                .keys()
+                .filter(|id| keep::page_of(id) == Some(page.as_str()))
+                .filter(|id| !wanted.iter().any(|uid| keep::entry_id(&page, *uid) == **id))
+                .cloned()
+                .collect();
+            for id in stale {
+                files::remove_kept(files, &id);
+                soon(100.0);
+            }
+            keep_track.retain(|uid, _| wanted.contains(uid));
+            if let Some(e) = error {
+                app.set_status(e, true);
+            }
+            if let (Some(ctx), Some(ms)) = (ctx, wake) {
+                ctx.request_repaint_after(std::time::Duration::from_secs_f64(ms / 1000.0));
+            }
+            on && all_kept
+        }
+
+        /// Offer the copies an earlier visit kept (#10220): "Restore unsaved design: <name>,
+        /// changed <time>?", one window for all of them, each with Restore, Open saved version
+        /// (when it has a file) and Discard.
+        fn keep_prompt(&mut self, ctx: &egui::Context) {
+            let offered = self.files.keep_offered.borrow().clone();
+            if offered.is_empty() || !self.files.ready.get() {
+                return;
+            }
+            let now = (js_sys::Date::now() / 1000.0) as u64;
+            let rows: Vec<_> = offered
+                .iter()
+                .map(|e| solidcraft_ui_egui::recovery_ui::BrowserCopy {
+                    name: &e.name,
+                    when: solidcraft_ui_egui::recovery_ui::ago_between(now, (e.changed_at / 1000.0) as u64),
+                    open_saved: keep::answers(e, self.saved_exists(e)).contains(&keep::Answer::OpenSaved),
+                })
+                .collect();
+            let act = solidcraft_ui_egui::recovery_ui::browser_copies_window(ctx, &self.app.preferences.language, &rows);
+            let Some((index, answer)) = act else { return };
+            let Some(entry) = offered.get(index) else { return };
+            let answer = match answer {
+                solidcraft_ui_egui::recovery_ui::CopyAnswer::Restore => keep::Answer::Restore,
+                solidcraft_ui_egui::recovery_ui::CopyAnswer::OpenSaved => keep::Answer::OpenSaved,
+                solidcraft_ui_egui::recovery_ui::CopyAnswer::Discard => keep::Answer::Discard,
+            };
+            self.keep_answer(entry, answer);
+        }
+
+        /// Whether a kept copy's design file can still be opened: in the browser's storage, or a
+        /// file on the computer this browser remembers.
+        fn saved_exists(&self, e: &keep::Entry) -> bool {
+            e.path.as_deref().is_some_and(|p| vfs::exists(p) || disk::parse(p).is_some_and(|(id, _)| self.files.disk_known.borrow().contains(id)))
+        }
+
+        /// Act on an answer in the "Restore unsaved design?" window (`keep::plan`).
+        fn keep_answer(&mut self, entry: &keep::Entry, answer: keep::Answer) {
+            let Some(plan) = keep::plan(answer, entry, self.saved_exists(entry)) else { return };
+            if plan.open_copy {
+                let copy = match files::prepare_kept(&entry.id, entry.path.as_deref()) {
+                    Ok(copy) => copy,
+                    Err(error) => {
+                        self.app.set_status(error, true);
+                        return;
+                    }
+                };
+                self.app.open_path(&copy);
+                if self.app.session.path.as_deref() != Some(copy.as_str()) {
+                    // Not opened (the status says why): it stays offered.
+                    return;
+                }
+                // It is its own design again (saving goes to its file), with its changes unsaved.
+                self.app.session.path = entry.path.clone();
+                self.app.session.doc_mut().name = entry.name.clone();
+                self.app.session.mark_unsaved();
+                self.app.home.open = false;
+            }
+            if let Some(path) = &plan.open_saved {
+                if vfs::exists(path) {
+                    self.app.open_path(path);
+                    if !keep::is_open(self.app.session.path.as_deref(), path) {
+                        // Not opened (the status says why): the copy stays offered.
+                        return;
+                    }
+                } else {
+                    // A file on the computer: the browser asks for access again, in this click.
+                    // The copy goes once the file has opened, not before: if access is refused,
+                    // the picker is dismissed or the file is gone, it stays offered.
+                    let (files, id) = (self.files.clone(), entry.id.clone());
+                    disk::restore(
+                        &self.files,
+                        path,
+                        Some(Box::new(move || {
+                            files.keep_offered.borrow_mut().retain(|e| e.id != id);
+                            files::remove_kept(&files, &id);
+                        })),
+                    );
+                    return;
+                }
+            }
+            if plan.drop_copy {
+                self.files.keep_offered.borrow_mut().retain(|e| e.id != entry.id);
+                files::remove_kept(&self.files, &entry.id);
+            }
        }

        /// The start page's recent designs are the stored ones: the remembered order first (those
@@ -491,7 +726,7 @@ mod web {
                return;
            }
            let mut act: Option<(&'static str, String)> = None;
-            let closed = solidcraft_ui_egui::ui_kit::Window::new(egui::Id::new("sc_browser_files"), "folder", "Files in this browser")
+            let closed = solidcraft_ui_egui::ui_kit::Window::new(egui::Id::unique("sc_browser_files"), "folder", "Files in this browser")
                // Room for long names; the kit still caps the window at the browser's width.
                .cards(4.0)
                .show_body(ctx, |ui| {
@@ -500,7 +735,7 @@ mod web {
                            files::pick_from_disk(&self.files, Intent::Open);
                        }
                        if ui_kit::button(ui, "Insert from computer…", ui_kit::Button::Normal)
-                            .on_hover_text(solidcraft_ui_egui::i18n::tr("web.files.insert_drawings_hint"))
+                            .backing_on_hover_text(solidcraft_ui_egui::i18n::tr("web.files.insert_drawings_hint"))
                            .clicked()
                        {
                            files::pick_from_disk(&self.files, Intent::Insert);
@@ -554,7 +789,7 @@ mod web {
                                        let design = solidcraft_engine::io::is_design_path(&e.name);
                                        if !design
                                            && ui_kit::button(ui, "Insert", ui_kit::Button::Small)
-                                                .on_hover_text(solidcraft_ui_egui::i18n::tr("web.files.insert_stored_drawings_hint"))
+                                                .backing_on_hover_text(solidcraft_ui_egui::i18n::tr("web.files.insert_stored_drawings_hint"))
                                                .clicked()
                                        {
                                            act = Some(("insert", e.name.clone()));
@@ -564,7 +799,7 @@ mod web {
                                            self.rename_focus = true;
                                        }
                                        if ui_kit::button(ui, "Save to computer…", ui_kit::Button::Small)
-                                            .on_hover_text("A copy in a file you choose; the stored design stays here")
+                                            .backing_on_hover_text("A copy in a file you choose; the stored design stays here")
                                            .clicked()
                                        {
                                            act = Some(("save_copy", e.name.clone()));
@@ -655,7 +890,7 @@ mod web {
        fn recovery_prompt(&mut self, ctx: &egui::Context) {
            let Some((name, path)) = self.files.recovery.borrow().clone() else { return };
            let mut answer = None;
-            let _ = solidcraft_ui_egui::ui_kit::Window::new(egui::Id::new("sc_browser_recovery"), "restore", "Recover unsaved work?")
+            let _ = solidcraft_ui_egui::ui_kit::Window::new(egui::Id::unique("sc_browser_recovery"), "restore", "Recover unsaved work?")
                .required()
                .show_body(ctx, |ui| {
                    ui.label(format!("“{name}” had unsaved changes when this page last closed."));
@@ -691,6 +926,13 @@ mod web {
            files::autosave(&self.files, None);
        }

+        /// Whether leaving the page asks through the browser's own box (`keep::asks_before_unload`).
+        fn asks_before_unload(&self) -> bool {
+            let any = solidcraft_ui_egui::documents::any_dirty(&self.app);
+            let prefs = &self.app.preferences;
+            keep::asks_before_unload(self.launch.persists(), prefs.keep_unsaved_in_browser, prefs.keep_unsaved_also_asks, any, self.all_kept)
+        }
+
        /// Whether the shell already has the on-demand face the live language needs.
        fn script_font_ready(&self) -> bool {
            match solidcraft_ui_egui::fonts::web_script_font_kind(solidcraft_ui_egui::i18n::effective_language(&self.app.preferences.language)) {
@@ -802,7 +1044,7 @@ mod web {
            self.api.poll();
            self.space_mouse.logic(&mut self.app, ctx);
            self.files_tick(ctx);
-            UNSAVED.with(|u| u.set(solidcraft_ui_egui::documents::any_dirty(&self.app)));
+            UNSAVED.with(|u| u.set(self.asks_before_unload()));
            DESIGN_SHOWN.with(|d| d.set(solidcraft_ui_egui::toolbar::design_shown(&self.app)));
        }
        fn raw_input_hook(&mut self, ctx: &egui::Context, raw: &mut egui::RawInput) {
@@ -822,7 +1064,7 @@ mod web {
        }
        fn ui(&mut self, ui: &mut egui::Ui, _frame: &mut eframe::Frame) {
            self.linked.tick(&mut self.app, ui.ctx());
-            UNSAVED.with(|u| u.set(self.launch.persists() && solidcraft_ui_egui::documents::any_dirty(&self.app)));
+            UNSAVED.with(|u| u.set(self.asks_before_unload()));
            if self.launch.embed {
                ui_kit::Container::new(ui.ctx(), ui_kit::Surface::Chrome).edge("embed_header", ui_kit::Edge::Top).show(ui, |ui| {
                    if ui_kit::button(ui, solidcraft_ui_egui::i18n::tr("web.open_full"), ui_kit::Button::Normal).clicked()
@@ -837,10 +1079,15 @@ mod web {
            if self.launch.persists() {
                self.file_panel(&ctx);
                self.recovery_prompt(&ctx);
+                self.keep_prompt(&ctx);
            }
            self.watch_text_for_font(&ctx);
            self.store_prefs(&ctx);
        }
+        #[cfg(target_arch = "wasm32")]
+        fn as_any_mut(&mut self) -> Option<&mut dyn std::any::Any> {
+            Some(&mut *self)
+        }
        fn persist_egui_memory(&self) -> bool {
            // eframe keeps this under one fixed key: only stable uses it, so a pre-release never rewrites it.
            self.launch.persists() && crate::channel::current().is_empty()
@@ -915,7 +1162,8 @@ mod web {
            {
                create.instance_descriptor.backends = eframe::wgpu::Backends::GL;
            }
-            let result = eframe::WebRunner::new()
+            let runner = eframe::WebRunner::new();
+            let result = runner
                .start(
                    canvas,
                    options,
@@ -927,7 +1175,7 @@ mod web {
                        }
                        let (panel, opener, saver, shown) = (files.clone(), files.clone(), files.clone(), files.clone());
                        let (restorable, restorer) = (files.clone(), files.clone());
-                        let services = if launch.embed { Services::default() } else { Services {
+                        let services = if !launch.persists() { Services::default() } else { Services {
                            // Open shows the browser's open dialog for a design where it has one
                            // (the file keeps its handle, so Save writes back to it), else the
                            // browser's files window. A command that reads another kind of file
@@ -959,7 +1207,7 @@ mod web {
                            can_restore: Some(Box::new(move |path: &str| {
                                disk::parse(path).is_some_and(|(id, _)| restorable.disk_known.borrow().contains(id))
                            })),
-                            restore_file: Some(Box::new(move |path: &str| disk::restore(&restorer, path))),
+                            restore_file: Some(Box::new(move |path: &str| disk::restore(&restorer, path, None))),
                            download_design: Some(Box::new(files::download)),
                            easyprint_upload: Some(std::sync::Arc::new(crate::easyprint::upload)),
                            browser_files: Some(Box::new(move || shown.panel.set(true))),
@@ -971,6 +1219,7 @@ mod web {
                        let (sender, receiver) = std::sync::mpsc::channel();
                        let mut app = SolveApp::new(Session::default(), services).with_control(receiver);
                        app.embedded = launch.embed;
+                        app.embed_editor = launch.editor;
                        // Listening before reading: settings another tab writes from now on are
                        // newer than those read here.
                        let other_tab_prefs = PrefsInbox::default();
@@ -1025,10 +1274,18 @@ mod web {
                            wheel_gestures: solidcraft_ui_egui::WebWheelGestures::default(),
                            prefs_writer: crate::PrefsWriter::default(),
                            other_tab_prefs,
+                            keep_track: Default::default(),
+                            all_kept: false,
                        }))
                    }),
                )
                .await;
+            if result.is_ok()
+                && crate::Launch::parse(&query()).persists()
+                && let Some(window) = web_sys::window()
+            {
+                keep_when_hidden(&window, &runner);
+            }
            if let Some(el) = document.get_element_by_id(LOADING_ID) {
                match result {
                    Ok(()) => dismiss_loading(el),
@@ -1081,6 +1338,17 @@ mod tests {
        assert!(full.fragment().is_none());
    }

+    #[test]
+    fn embed_editor_needs_no_design_link_and_keeps_nothing_in_the_browser() {
+        let editor = Launch::parse("?embed=editor");
+        assert!(editor.editor && !editor.embed && !editor.persists());
+        let linked = Launch::parse("?embed=editor&open=https://example.org/a.sc");
+        assert!(linked.editor && !linked.embed, "an editing embed may open a linked design, still editable");
+        let viewer = Launch::parse("?embed=viewer&open=https://example.org/a.sc");
+        assert!(viewer.embed && !viewer.editor, "any other value is the viewer embed, as before");
+        assert!(!Launch::parse("?other=editor").editor);
+    }
+
    #[test]
    fn design_links_refuse_hostile_schemes_credentials_and_sizes() {
        assert!(design_url("https://example.org/arm.solidcraft?download=1", "http://solidcraft.io").is_ok());
@@ -81,6 +81,7 @@ windows-sys = { version = "0.61", features = [
    "Win32_UI_HiDpi",
    "Win32_UI_WindowsAndMessaging",
 ] }
+winreg = "0.56"

 [target.'cfg(target_os = "macos")'.dependencies]
 muda = { version = "0.21.2", default-features = false }
@@ -92,7 +93,7 @@ hidapi = { version = "2.6.7", default-features = false, features = ["macos-share
 # Files opened from Finder and the Dock (src/open_documents.rs), and the fullscreen title-bar
 # inset (src/main.rs); all already come with eframe and rfd.
 objc2 = "0.6"
-objc2-app-kit = { version = "0.3", default-features = false, features = ["std", "NSApplication", "NSResponder", "NSWindow"] }
+objc2-app-kit = { version = "0.3", default-features = false, features = ["std", "NSAccessibility", "NSApplication", "NSResponder", "NSWindow", "NSWorkspace"] }
 objc2-foundation = { version = "0.3", default-features = false, features = ["std", "block2", "NSArray", "NSNotification", "NSOperation", "NSProcessInfo", "NSString", "NSURL"] }
 block2 = "0.6"
 # Native crash capture (src/native_crash_macos.rs): the signal handler, the faulting module
@@ -68,7 +68,9 @@ pub fn start(listen_on: control_auth::Listen, ctx: egui::Context) -> Receiver<Co
                Ok(l) => {
                    if let Some(port) = listen_on_listener(l, token.clone(), tx, ctx, false) {
                        if matches!(listen_on, control_auth::Listen::Default) {
-                            eprintln!("solidcraft: control channel on the default port 127.0.0.1:{port} (Preferences > Assistant turns it off)");
+                            solidcraft_engine::note!(
+                                "solidcraft: control channel on the default port 127.0.0.1:{port} (Preferences > Assistant turns it off)"
+                            );
                        }
                        // The discovery file: where `solidcraft-cli mcp` finds this app with no arguments.
                        match control_auth::write_current_port(port) {
@@ -77,14 +79,14 @@ pub fn start(listen_on: control_auth::Listen, ctx: egui::Context) -> Receiver<Co
                                    *p = Some((port, token));
                                }
                            }
-                            Err(e) => eprintln!("solidcraft: could not write the control discovery file ({e})"),
+                            Err(e) => solidcraft_engine::note!("solidcraft: could not write the control discovery file ({e})"),
                        }
                    }
                }
-                Err(e) => eprintln!("solidcraft: control server failed to bind 127.0.0.1: {e}"),
+                Err(e) => solidcraft_engine::note!("solidcraft: control server failed to bind 127.0.0.1: {e}"),
            }
        }
-        None => eprintln!("solidcraft: control server not started: no random token available"),
+        None => solidcraft_engine::note!("solidcraft: control server not started: no random token available"),
    }
    rx
 }
@@ -95,13 +97,13 @@ pub fn start(listen_on: control_auth::Listen, ctx: egui::Context) -> Receiver<Co
 /// requests go to `tx`, where the chat's gate reads them; one may wait long for the user's Allow.
 pub fn listen_agent(tx: Sender<ControlRequest>, ctx: egui::Context) -> Option<u16> {
    let Some(token) = new_token() else {
-        eprintln!("solidcraft: agent chat endpoint not started: no random token available");
+        solidcraft_engine::note!("solidcraft: agent chat endpoint not started: no random token available");
        return None;
    };
    let listener = match TcpListener::bind(("127.0.0.1", 0)) {
        Ok(l) => l,
        Err(e) => {
-            eprintln!("solidcraft: control server failed to bind 127.0.0.1: {e}");
+            solidcraft_engine::note!("solidcraft: control server failed to bind 127.0.0.1: {e}");
            return None;
        }
    };
@@ -115,19 +117,21 @@ fn listen_on_listener(listener: TcpListener, token: String, tx: Sender<ControlRe
    match control_auth::token_path(port) {
        Some(path) => match control_auth::write_token_file(&path, &token) {
            Ok(()) => {
-                eprintln!("solidcraft: control server listening on 127.0.0.1:{port} (token in {})", path.display());
+                solidcraft_engine::note!("solidcraft: control server listening on 127.0.0.1:{port} (token in {})", path.display());
                if let Ok(mut files) = TOKEN_FILES.lock() {
                    files.push((path, token.clone()));
                }
            }
-            Err(e) => eprintln!(
+            Err(e) => solidcraft_engine::note!(
                "solidcraft: control server listening on 127.0.0.1:{port}, but its token file {} could not be written ({e}); \
                 clients need SOLIDCRAFT_CONTROL_TOKEN",
                path.display()
            ),
        },
        None => {
-            eprintln!("solidcraft: control server listening on 127.0.0.1:{port}; no data folder for its token, clients need SOLIDCRAFT_CONTROL_TOKEN")
+            solidcraft_engine::note!(
+                "solidcraft: control server listening on 127.0.0.1:{port}; no data folder for its token, clients need SOLIDCRAFT_CONTROL_TOKEN"
+            )
        }
    }
    let token = std::sync::Arc::new(token);
@@ -0,0 +1,100 @@
+//! Is the file chooser that opens the desktop's own? (#10159)
+//!
+//! `rfd` opens the file chooser through the XDG desktop portal; without the portal it falls
+//! back to zenity, a window that does not belong to the app and that the app never mentions.
+//! The desktop's own chooser is the portal one, so the app has to know when it is not the one
+//! that opens, and say so in the session log.
+//!
+//! The session bus is asked once, on a thread of its own: a bus that answers late must not
+//! hold the window. What it answered is kept, and read when a file is opened.
+
+use std::sync::atomic::{AtomicBool, AtomicU8, Ordering};
+
+/// The portal's bus name: the desktop's own file chooser lives behind it.
+const PORTAL: &str = "org.freedesktop.portal.Desktop";
+
+/// The bus has not answered yet.
+const UNKNOWN: u8 = 0;
+/// There is no session bus to reach the portal on.
+const NO_SESSION_BUS: u8 = 1;
+/// The bus is there but the portal does not answer on it.
+const NO_PORTAL_SERVICE: u8 = 2;
+/// The bus is there and the portal answers on it.
+const PORTAL_THERE: u8 = 3;
+
+/// What the session bus said about the portal.
+static BUS: AtomicU8 = AtomicU8::new(UNKNOWN);
+/// A file chooser is opening: whether it is the desktop's own is to be said.
+static OPENING: AtomicBool = AtomicBool::new(false);
+
+/// Ask the session bus, on a thread of its own, whether the portal is there.
+pub fn start(ctx: &egui::Context) {
+    let thread_ctx = ctx.clone();
+    let probe = move || {
+        let answer = match session_bus() {
+            None => NO_SESSION_BUS,
+            Some(connection) => match portal_on(&connection) {
+                true => PORTAL_THERE,
+                false => NO_PORTAL_SERVICE,
+            },
+        };
+        BUS.store(answer, Ordering::Relaxed);
+        // The answer is in: a file chooser waiting for it can be told now.
+        thread_ctx.request_repaint();
+    };
+    if let Err(e) = std::thread::Builder::new().name("desktop-chooser".into()).spawn(probe) {
+        log::warn!("file chooser: no thread to ask the session bus: {e}");
+        // Nothing will answer: the desktop's own chooser cannot be told apart from the start.
+        BUS.store(PORTAL_THERE, Ordering::Relaxed);
+    }
+}
+
+/// The session bus, when there is one to talk to.
+fn session_bus() -> Option<zbus::blocking::Connection> {
+    zbus::blocking::Connection::session().ok()
+}
+
+/// Whether the portal answers on the bus: it is either running on it or waiting to be started.
+fn portal_on(connection: &zbus::blocking::Connection) -> bool {
+    let Ok(bus) = zbus::blocking::fdo::DBusProxy::new(connection) else { return false };
+    let named = |names: Vec<zbus::names::OwnedBusName>| names.iter().any(|name| name.as_str() == PORTAL);
+    // A portal that is running is on the bus; one that is not running yet is still there when
+    // the bus can start it, which is what the portal's service file is for.
+    match (bus.list_names().map(named), bus.list_activatable_names().map(named)) {
+        (Ok(running), Ok(startable)) => running || startable,
+        (Ok(running), Err(_)) => running,
+        (Err(_), Ok(startable)) => startable,
+        // The bus does not answer: nothing answers on it.
+        (Err(_), Err(_)) => false,
+    }
+}
+
+/// A file chooser is opening: ask for a frame, so that the reason it is not the desktop's own
+/// is said (#10159).
+pub fn note_opening(ctx: &egui::Context) {
+    OPENING.store(true, Ordering::Relaxed);
+    ctx.request_repaint();
+}
+
+/// The reason the file chooser that is opening is not the desktop's own, if it is not.
+///
+/// The decision is the one the test states: without a session bus there is no bus to reach the
+/// portal on; with a bus but no portal on it, `rfd` falls back to zenity; and under XWayland the
+/// window is an X11 one while the session is a Wayland one, which the portal refuses to parent
+/// its chooser to.
+pub fn take_reason() -> Option<&'static str> {
+    if !OPENING.load(Ordering::Relaxed) {
+        return None;
+    }
+    let (dbus_session, portal_service) = match BUS.load(Ordering::Relaxed) {
+        NO_SESSION_BUS => (false, false),
+        NO_PORTAL_SERVICE => (true, false),
+        PORTAL_THERE => (true, true),
+        // The bus has not answered yet: wait for it, and say nothing yet.
+        _ => return None,
+    };
+    OPENING.store(false, Ordering::Relaxed);
+    let wayland_display = std::env::var_os("WAYLAND_DISPLAY").is_some();
+    let x11_display = super::window_system_now() == Some("x11");
+    super::desktop_chooser_fallback(dbus_session, portal_service, wayland_display, x11_display)
+}
@@ -0,0 +1,63 @@
+//! Cached accessibility signal, observed only while a theme offers blur. No UI-thread IO.
+use std::sync::{
+    Arc,
+    atomic::{AtomicBool, AtomicU8, Ordering},
+};
+
+#[derive(Default)]
+struct Reading {
+    needed: AtomicBool,
+    started: AtomicBool,
+    value: AtomicU8,
+}
+
+pub fn cached(ctx: &egui::Context) -> Box<dyn Fn(bool) -> Option<bool>> {
+    let state = Arc::new(Reading::default());
+    let ctx = ctx.clone();
+    Box::new(move |needed| {
+        state.needed.store(needed, Ordering::Relaxed);
+        if needed && !state.started.swap(true, Ordering::Relaxed) {
+            let weak = Arc::downgrade(&state);
+            let ctx = ctx.clone();
+            if let Err(error) = std::thread::Builder::new().name("desktop-transparency".into()).spawn(move || {
+                while let Some(state) = weak.upgrade() {
+                    if state.needed.load(Ordering::Relaxed) {
+                        let code = match read() {
+                            Some(true) => 1,
+                            Some(false) => 2,
+                            None => 0,
+                        };
+                        if state.value.swap(code, Ordering::Relaxed) != code {
+                            ctx.request_repaint();
+                        }
+                    }
+                    drop(state);
+                    std::thread::sleep(std::time::Duration::from_secs(5));
+                }
+            }) {
+                log::warn!("desktop transparency: could not observe accessibility setting: {error}");
+            }
+        }
+        match state.value.load(Ordering::Relaxed) {
+            1 => Some(true),
+            2 => Some(false),
+            _ => None,
+        }
+    })
+}
+
+#[cfg(target_os = "windows")]
+fn read() -> Option<bool> {
+    let key =
+        winreg::RegKey::predef(winreg::enums::HKEY_CURRENT_USER).open_subkey(r"Software\Microsoft\Windows\CurrentVersion\Themes\Personalize").ok()?;
+    match key.get_value::<u32, _>("EnableTransparency").ok()? {
+        0 => Some(true),
+        1 => Some(false),
+        _ => None,
+    }
+}
+
+#[cfg(target_os = "macos")]
+fn read() -> Option<bool> {
+    objc2::rc::autoreleasepool(|_| Some(objc2_app_kit::NSWorkspace::sharedWorkspace().accessibilityDisplayShouldReduceTransparency()))
+}
@@ -112,7 +112,7 @@ pub fn restart(software: bool, lost_at: u64, reason: &str) {
 pub fn end() -> ! {
    let watchdog = std::thread::Builder::new().name("solidcraft-exit".into()).spawn(|| {
        std::thread::sleep(END_GRACE);
-        eprintln!("SolidCraft graphics: still closing after the device was lost; aborting");
+        solidcraft_engine::note!("SolidCraft graphics: still closing after the device was lost; aborting");
        std::process::abort();
    });
    if let Err(e) = watchdog {
@@ -23,7 +23,11 @@ mod app_icon;
 mod come_forward;
 mod control_server;
 #[cfg(target_os = "linux")]
+mod desktop_chooser;
+#[cfg(target_os = "linux")]
 mod desktop_theme;
+#[cfg(any(target_os = "windows", target_os = "macos"))]
+mod desktop_transparency;
 mod device_lost;
 #[cfg(target_os = "windows")]
 mod native_crash;
@@ -75,7 +79,7 @@ fn mark(step: &str) {
    static START: std::sync::OnceLock<(std::time::Instant, bool)> = std::sync::OnceLock::new();
    let (start, on) = START.get_or_init(|| (std::time::Instant::now(), solidcraft_engine::geom::env::var_os("PROFILE_STARTUP").is_some()));
    if *on {
-        eprintln!("startup {:>6.0} ms  {step}", start.elapsed().as_secs_f64() * 1000.0);
+        solidcraft_engine::note!("startup {:>6.0} ms  {step}", start.elapsed().as_secs_f64() * 1000.0);
    }
 }

@@ -240,6 +244,12 @@ impl eframe::App for App {
            menu.tick(&mut self.solve, ctx);
        }
        self.solve.logic(ctx);
+        // The file chooser that opened is not the desktop's own: the user has to be told (#10159).
+        #[cfg(target_os = "linux")]
+        if let Some(reason) = desktop_chooser::take_reason() {
+            let text = self.solve.tr(reason).to_string();
+            self.solve.set_status(text, false);
+        }
        self.dialog_folder.design(self.solve.session.path.as_deref());
        #[cfg(any(target_os = "windows", target_os = "linux", target_os = "macos"))]
        if !self.solve.file_picker_busy() {
@@ -293,6 +303,8 @@ impl eframe::App for App {
            log::warn!("a picture was still being drawn as the app closed");
        }
        solidcraft_ui_egui::recovery_ui::close(&mut self.solve);
+        // A GPU path tracer setup still running did not stop the app (#9236).
+        solidcraft_ui_egui::render_workspace::close(&mut self.solve);
        solidcraft_ui_egui::open_elsewhere::close(&mut self.solve);
        // Before a restart (`Drop for App`) starts the next instance, which would otherwise get
        // nothing from the 3D mouse driver (`solidcraft_3dx_client::stop`).
@@ -356,7 +368,7 @@ impl App {
        let Some(gpu) = self.gpu.as_mut().filter(|g| g.lost_at.is_none() && g.lost.is_lost()) else { return };
        let reason = gpu.lost.reason().unwrap_or_default();
        log::error!("graphics: the device was lost ({reason}); closing to start again");
-        eprintln!("SolidCraft graphics: the device was lost ({reason}); starting again");
+        solidcraft_engine::note!("SolidCraft graphics: the device was lost ({reason}); starting again");
        solidcraft_engine::crash::phase(&format!("graphics device lost: {reason}"));
        gpu.lost_at = Some(device_lost::now_secs());
        gpu.reason = reason;
@@ -469,12 +481,19 @@ fn fullscreen_content_insets(raw: &mut egui::RawInput, title_height: f32, zoom:

 fn services(cc: &eframe::CreationContext<'_>, folder: &DialogFolder) -> Services {
    let parent = rfd::AsyncFileDialog::new().set_parent(cc);
+    // The file chooser that opens may not be the desktop's own: the user is told when it does
+    // not (#10159).
+    #[cfg(target_os = "linux")]
+    let chooser_ctx = cc.egui_ctx.clone();
    let open_parent = parent.clone();
    let program_parent = parent.clone();
    let file_parent = parent.clone();
    let (open_folder, file_folder, save_folder) = (folder.clone(), folder.clone(), folder.clone());
    Services {
        pick_open: Some(Box::new(move |first: &[&str]| {
+            // The chooser that opens may not be the desktop's own (#10159).
+            #[cfg(target_os = "linux")]
+            desktop_chooser::note_opening(&chooser_ctx);
            // The file type the command reads comes first, so the picker opens on it (#1801).
            let mut dialog = open_folder.start(open_parent.clone());
            if !first.is_empty() {
@@ -539,6 +558,10 @@ fn services(cc: &eframe::CreationContext<'_>, folder: &DialogFolder) -> Services
        desktop_dark: Some(desktop_theme::start(&cc.egui_ctx)),
        #[cfg(not(target_os = "linux"))]
        desktop_dark: None,
+        #[cfg(any(target_os = "windows", target_os = "macos"))]
+        reduce_transparency: Some(desktop_transparency::cached(&cc.egui_ctx)),
+        #[cfg(not(any(target_os = "windows", target_os = "macos")))]
+        reduce_transparency: None,
        http_get: Some(std::sync::Arc::new(http_get)),
        http_download: Some(std::sync::Arc::new(http_download)),
        // Already an installed app: only the browser build offers to install.
@@ -779,6 +802,28 @@ fn graphics() -> Option<serde_json::Value> {
    graphics_path().and_then(|p| std::fs::read_to_string(p).ok()).and_then(|s| serde_json::from_str::<serde_json::Value>(&s).ok())
 }

+fn restore_preferences(app: &mut SolveApp, stored_ui: Option<&str>, saved_graphics: Option<&serde_json::Value>, safe_mode: bool) {
+    if let Some(p) = stored_ui.filter(|_| !safe_mode) {
+        app.load_prefs(p);
+    }
+    // Even safe mode edits the real graphics.json. Keep its choices in Preferences so an
+    // anti-aliasing change cannot erase them; safe mode's renderer still uses its own defaults.
+    restore_graphics_preferences(app, saved_graphics);
+}
+
+/// Restore startup choices after loading the separately saved UI preferences.
+fn restore_graphics_preferences(app: &mut SolveApp, saved: Option<&serde_json::Value>) {
+    app.preferences.graphics_adapter = saved.and_then(|v| v.get("adapter").and_then(serde_json::Value::as_str)).unwrap_or_default().to_string();
+    // graphics.json chooses the window before app.ron is loaded. Reflect that saved choice,
+    // not the current session's window system (which an environment override may change).
+    app.preferences.window_system = saved
+        .and_then(|v| v.get("window_system").and_then(serde_json::Value::as_str))
+        .map(str::trim)
+        .filter(|choice| matches!(*choice, "wayland" | "x11"))
+        .unwrap_or("auto")
+        .to_string();
+}
+
 /// The graphics backend preference (`graphics.json`'s `backend`: `auto`, `dx12`, `vulkan`, `gl`).
 fn backend_preference() -> Option<String> {
    graphics().and_then(|v| v.get("backend").and_then(serde_json::Value::as_str).map(str::to_string))
@@ -948,7 +993,7 @@ fn main() -> eframe::Result {
    if let Some(value) = max_file_size {
        let applied = startup::max_file_size(value.as_deref()).and_then(|bytes| solidcraft_engine::io::limits::set_override(Some(bytes)));
        if let Err(error) = applied {
-            eprintln!("SolidCraft: {error}");
+            solidcraft_engine::note!("SolidCraft: {error}");
            return Err(eframe::Error::AppCreation(std::io::Error::other(error).into()));
        }
    }
@@ -980,7 +1025,7 @@ fn main() -> eframe::Result {
    let fallback_note = std::env::var(startup::FALLBACK_NOTE_ENV).ok().map(|s| s.chars().take(4096).collect::<String>());
    if let Some(note) = &fallback_note {
        log::warn!("{note}");
-        eprintln!("SolidCraft: {note}");
+        solidcraft_engine::note!("SolidCraft: {note}");
        notes.push(note.clone());
    }
    let saved_samples = if safe_mode { None } else { msaa() };
@@ -997,6 +1042,8 @@ fn main() -> eframe::Result {
            solidcraft_engine::crash::install(dir, build)
        })
        .unwrap_or_default();
+    // The recovery folder also holds the reopen guard marker (#5064); read once, reused below.
+    let recovery_dir = solidcraft_engine::recovery::default_dir();
    // A crash in native code (a graphics driver) says where it happened: the exception or signal
    // and the module on Windows and macOS, and on every system the startup step the app was in.
    #[cfg(target_os = "windows")]
@@ -1079,6 +1126,10 @@ fn main() -> eframe::Result {
            solidcraft_ui_egui::fonts::load_system_fonts_in_background(&cc.egui_ctx);
            mark("fonts");
            let dialog_folder = DialogFolder::default();
+            // The file chooser that opens may not be the desktop's own: the session bus is asked
+            // now, so the answer is there when a file is opened (#10159).
+            #[cfg(target_os = "linux")]
+            desktop_chooser::start(&cc.egui_ctx);
            let mut app = SolveApp::new(Session::default(), services(cc, &dialog_folder));
            app.apply_off_thread = Some(solidcraft_ui_egui::dialogs::APPLY_AT_ONCE);
            app.custom_titlebar = custom_titlebar;
@@ -1087,21 +1138,20 @@ fn main() -> eframe::Result {
                // Windows: the taskbar button shows the mark even when slow first frames keep the
                // taskbar waiting for the window's icon.
                if !native_frame::set_class_icon(cc) {
-                    eprintln!("SolidCraft window: no class icon; the taskbar may show a generic one");
+                    solidcraft_engine::note!("SolidCraft window: no class icon; the taskbar may show a generic one");
                }
                // The OS hit test offers the resize border, at the window's DPI, from the first
                // message (#1381).
                app.native_resize_border = custom_titlebar && native_frame::install(cc);
                if custom_titlebar && !app.native_resize_border {
-                    eprintln!("SolidCraft window: no native resize border; egui edge zones instead");
+                    solidcraft_engine::note!("SolidCraft window: no native resize border; egui edge zones instead");
                }
            }
            app.integrated_titlebar = cfg!(target_os = "macos");
            app.cpu_meshing = safe_mode;
            app.graphics_fallback = fallback_note.clone();
-            if let Some(p) = cc.storage.and_then(|s| solidcraft_ui_egui::prefs::stored(|k| s.get_string(k))).filter(|_| !safe_mode) {
-                app.load_prefs(&p);
-            }
+            let stored_ui = cc.storage.and_then(|s| solidcraft_ui_egui::prefs::stored(|k| s.get_string(k)));
+            restore_preferences(&mut app, stored_ui.as_deref(), graphics().as_ref(), safe_mode);
            if let Some(path) = &theme_file
                && let Err(e) = solidcraft_ui_egui::prefs::follow_theme_file_for_run(&mut app, path)
            {
@@ -1114,10 +1164,6 @@ fn main() -> eframe::Result {
                lost_at: None,
                reason: String::new(),
            });
-            if !safe_mode {
-                app.preferences.graphics_adapter =
-                    graphics().and_then(|v| v.get("adapter").and_then(serde_json::Value::as_str).map(str::to_string)).unwrap_or_default();
-            }
            if let Some(rs) = &cc.wgpu_render_state {
                app.services.graphics_adapters = rs
                    .available_adapters
@@ -1129,9 +1175,10 @@ fn main() -> eframe::Result {
                    .collect();
                let info = rs.adapter.get_info();
                if !app.preferences.graphics_adapter.is_empty() && !info.name.eq_ignore_ascii_case(app.preferences.graphics_adapter.as_str()) {
-                    eprintln!(
+                    solidcraft_engine::note!(
                        "SolidCraft graphics: preferred adapter {:?} was not used; using {:?} instead",
-                        app.preferences.graphics_adapter, info.name
+                        app.preferences.graphics_adapter,
+                        info.name
                    );
                }
                let samples = scene_msaa_request(saved_samples);
@@ -1139,7 +1186,7 @@ fn main() -> eframe::Result {
                    eframe::egui_wgpu::supported_msaa_samples(&rs.adapter, &rs.device, rs.target_format, depth)
                });
                let scene_samples = scene_samples(info.backend, u32::from(samples), &supported);
-                eprintln!("SolidCraft graphics: {:?}, MSAA {scene_samples}x (requested {}x)", rs.adapter.get_info().backend, samples);
+                solidcraft_engine::note!("SolidCraft graphics: {:?}, MSAA {scene_samples}x (requested {}x)", rs.adapter.get_info().backend, samples);
                solidcraft_engine::crash::phase("viewport pipelines (shader compile)");
                let scene_samples = app.set_wgpu_split(rs, depth_bits, STENCIL_BITS, scene_samples);
                app.msaa_supported = supported;
@@ -1190,8 +1237,25 @@ fn main() -> eframe::Result {
            };
            // No design given: the designs open at the last quit, when the preference asks (#5542).
            // Not when driven over the control channel, whose clients expect a fresh design.
-            let files =
-                if files.is_empty() && !sample && control_port.is_none() { solidcraft_ui_egui::documents::designs_to_reopen(&app) } else { files };
+            // A design that stopped the last session while it was being reopened is skipped this
+            // time, so one bad file cannot brick every launch (#5064).
+            app.reopen_guard_dir = recovery_dir.clone();
+            let files = if files.is_empty() && !sample && control_port.is_none() {
+                let (reopen, skipped) = solidcraft_ui_egui::documents::reopen_plan(&app, recovery_dir.as_deref());
+                if !skipped.is_empty() {
+                    let names: Vec<String> = skipped
+                        .iter()
+                        .map(|p| std::path::Path::new(p).file_name().map(|n| n.to_string_lossy().into_owned()).unwrap_or_else(|| p.clone()))
+                        .collect();
+                    notes.push(format!(
+                        "The last session stopped while reopening {}. It was not reopened this time; open it yourself if you need it.",
+                        names.join(", ")
+                    ));
+                }
+                reopen
+            } else {
+                files
+            };
            for f in &files {
                app.open_path_async(f);
            }
@@ -1207,9 +1271,9 @@ fn main() -> eframe::Result {
                app.home.show(rev);
            }
            // Autosave, and offer what crashed sessions left behind.
-            if let Some(dir) = solidcraft_engine::recovery::default_dir() {
+            if let Some(dir) = recovery_dir.as_ref() {
                let every = if app.autosave_minutes > 0.0 { app.autosave_minutes * 60.0 } else { f64::MAX / 4.0 };
-                solidcraft_ui_egui::recovery_ui::start(&mut app, &dir, std::time::Duration::from_secs_f64(every.min(1e9)));
+                solidcraft_ui_egui::recovery_ui::start(&mut app, dir, std::time::Duration::from_secs_f64(every.min(1e9)));
                // Safe mode keeps autosaving but offers nothing: the entries wait for a normal start.
                if safe_mode {
                    app.recoverable.clear();
@@ -1283,7 +1347,7 @@ fn wgpu_options(cpu: bool, preference: Option<&str>) -> eframe::egui_wgpu::WgpuC
        let retry = std::env::var(startup::RETRY_BACKEND_ENV).ok();
        let preference = if cpu { preference } else { retry.as_deref().or(preference) };
        if let Some(backends) = startup::choose_backends(cfg!(target_os = "windows"), env_set, cpu, preference, startup::has_hardware_adapter) {
-            eprintln!("SolidCraft graphics: starting {backends:?}");
+            solidcraft_engine::note!("SolidCraft graphics: starting {backends:?}");
            setup.instance_descriptor.backends = backends;
        }
        let intel_mac = cfg!(all(target_os = "macos", target_arch = "x86_64"));
@@ -1309,7 +1373,7 @@ fn wgpu_options(cpu: bool, preference: Option<&str>) -> eframe::egui_wgpu::WgpuC
 /// event loop or a failed device; each retry advances through the APIs, then software once.
 fn no_window(error: eframe::Error, tried_cpu: bool, failed: eframe::wgpu::Backends, settings: Option<&std::path::Path>) -> eframe::Result {
    log::error!("the window could not open: {error}");
-    eprintln!("SolidCraft: the window could not open: {error}");
+    solidcraft_engine::note!("SolidCraft: the window could not open: {error}");
    // This failure was handled, so neither the marker nor the journal should call it a crash.
    if let Some(dir) = settings {
        startup::started(dir);
@@ -1322,7 +1386,7 @@ fn no_window(error: eframe::Error, tried_cpu: bool, failed: eframe::wgpu::Backen
        let previous = std::env::var(startup::FALLBACK_NOTE_ENV).unwrap_or_default();
        let note = startup::fallback_note(&previous, failed, next, &error.to_string());
        log::warn!("{note}");
-        eprintln!("SolidCraft: {note}");
+        solidcraft_engine::note!("SolidCraft: {note}");
        let mut command = std::process::Command::new(exe);
        command.args(std::env::args_os().skip(1)).env(startup::FALLBACK_NOTE_ENV, note);
        if next == "cpu" {
@@ -1397,6 +1461,47 @@ fn prefer_x11(display: bool, wayland_display: bool, desktop: Option<&str>, wayla
    display && !(niri && wayland_display)
 }

+#[cfg(all(unix, not(target_os = "macos")))]
+const CHOOSER_NO_SESSION_BUS: &str = "file.open.portal_fallback.no_session_bus";
+#[cfg(all(unix, not(target_os = "macos")))]
+const CHOOSER_NO_PORTAL_SERVICE: &str = "file.open.portal_fallback.no_portal_service";
+#[cfg(all(unix, not(target_os = "macos")))]
+const CHOOSER_XWAYLAND: &str = "file.open.portal_fallback.xwayland";
+
+/// Whether the chooser that opens is NOT the desktop's own, and why.
+///
+/// `rfd` opens the file chooser through the XDG desktop portal; when the portal is not there it
+/// falls back to zenity, which opens a window that does not belong to SolidCraft and that the
+/// application never mentions. The application has to know that: this decision is what the warning
+/// is built on.
+///
+/// * `dbus_session`: the session bus is there (`DBUS_SESSION_BUS_ADDRESS`).
+/// * `portal_service`: the file chooser portal answers on it.
+/// * `wayland_display`: a Wayland session runs (`WAYLAND_DISPLAY`).
+/// * `x11_display`: the window is an X11 one (`DISPLAY`, or XWayland).
+///
+/// `None` means the desktop's own chooser is the one that opens and there is nothing to say;
+/// `Some` carries the reason to report.
+#[cfg(all(unix, not(target_os = "macos")))]
+#[cfg_attr(not(target_os = "linux"), allow(dead_code))]
+fn desktop_chooser_fallback(dbus_session: bool, portal_service: bool, wayland_display: bool, x11_display: bool) -> Option<&'static str> {
+    // Without a session bus there is no bus to reach the portal on, so the chooser is not the
+    // desktop's own whatever else is there.
+    if !dbus_session {
+        return Some(CHOOSER_NO_SESSION_BUS);
+    }
+    // The bus is there but the portal does not answer on it: `rfd` falls back to zenity.
+    if !portal_service {
+        return Some(CHOOSER_NO_PORTAL_SERVICE);
+    }
+    // Under XWayland the window is an X11 one while the session is a Wayland one, and the portal
+    // refuses to parent its chooser to an X11 window: `rfd` falls back to zenity.
+    if wayland_display && x11_display {
+        return Some(CHOOSER_XWAYLAND);
+    }
+    None
+}
+
 #[cfg(all(test, unix, not(target_os = "macos")))]
 mod backend_tests {
    use super::prefer_x11;
@@ -1432,6 +1537,30 @@ mod backend_tests {
        assert!(prefer_x11(true, true, Some("niri"), over(Some("x11"))));
    }

+    /// The file chooser must say when it is NOT the desktop's own: `rfd` falls back to zenity
+    /// when the XDG portal is not there, and the user gets a foreign window with no explanation.
+    #[test]
+    fn the_file_picker_says_when_it_is_not_the_desktops_own_chooser() {
+        use super::desktop_chooser_fallback;
+        // The normal case: the portal is there, the desktop's own chooser opens, nothing to say.
+        assert_eq!(desktop_chooser_fallback(true, true, true, false), None);
+        // No session bus: the portal can not be reached at all, so `rfd` falls back to zenity.
+        assert!(
+            desktop_chooser_fallback(false, true, true, false).is_some(),
+            "without a D-Bus session bus the file chooser is not the desktop's own: the user has to be told"
+        );
+        // The bus is there but the portal service is not: same fallback, same warning.
+        assert!(
+            desktop_chooser_fallback(true, false, true, false).is_some(),
+            "without the desktop portal service the file chooser is not the desktop's own: the user has to be told"
+        );
+        // XWayland: the parent window is an X11 one and the portal refuses it, so `rfd` falls back.
+        assert!(
+            desktop_chooser_fallback(true, true, true, true).is_some(),
+            "under XWayland the portal rejects the parent window: the user has to be told"
+        );
+    }
+
    #[test]
    fn the_desktops_title_bar_only_when_asked_for() {
        use super::titlebar_choice;
@@ -1663,7 +1792,7 @@ mod viewport_tests {
                viewport.fullscreen = Some(fullscreen);
                viewport.native_pixels_per_point = Some(retina);
                super::fullscreen_content_insets(&mut raw, 32.0, zoom);
-                let _ = ctx.run_ui(raw, |ui| super::content_ui(app, ui));
+                ctx.run_ui(raw, |ui| super::content_ui(app, ui)).textures_delta.clear();
            };
            // Enter, leave, and enter again: no stale inset when returning to a normal window.
            for fullscreen in [false, true, false, true] {
@@ -1709,6 +1838,88 @@ mod viewport_tests {

 #[cfg(test)]
 mod msaa_tests {
+    /// Safe mode uses default UI settings but edits the real graphics.json for the next start.
+    #[test]
+    fn safe_mode_preserves_graphics_choices_when_changing_antialiasing() {
+        use serde_json::{Value, json};
+        use solidcraft_ui_egui::scenario::Harness;
+
+        for choice in ["wayland", "x11"] {
+            let mut h = Harness::new();
+            let path = h.dir.join("graphics.json");
+            let saved = json!({"window_system": choice, "adapter": "Selected GPU", "backend": "vulkan", "msaa": 8});
+            std::fs::write(&path, saved.to_string()).unwrap();
+            h.app.services.graphics_path = Some(path.to_string_lossy().into_owned());
+            let defaults = h.app.preferences.clone();
+            let stored_ui = json!({"preferences": {"window_system": "auto", "graphics_adapter": "Stale GPU", "msaa": 2,
+                "display_quality": "fine"}})
+            .to_string();
+            super::restore_preferences(&mut h.app, Some(&stored_ui), Some(&saved), true);
+
+            assert_eq!(h.app.preferences.window_system, choice);
+            assert_eq!(h.app.preferences.graphics_adapter, "Selected GPU");
+            assert_eq!(h.app.preferences.msaa, defaults.msaa, "safe mode ignores saved anti-aliasing");
+            assert_eq!(h.app.preferences.display_quality, defaults.display_quality, "safe mode ignores saved UI settings");
+            assert_eq!(serde_json::from_str::<Value>(&std::fs::read_to_string(&path).unwrap()).unwrap(), saved, "startup does not write settings");
+
+            assert_eq!(h.call("ui.prefs", json!({"open": "Graphics"}))["ok"], true);
+            assert_eq!(h.call("ui.prefs", json!({"msaa": 1}))["ok"], true);
+            assert_eq!(h.call("ui.prefs", json!({"button": "ok"}))["ok"], true);
+            let after: Value = serde_json::from_str(&std::fs::read_to_string(&path).unwrap()).unwrap();
+            assert_eq!(after, json!({"window_system": choice, "adapter": "Selected GPU", "backend": "vulkan", "msaa": 1}));
+
+            let mut normal = Harness::new();
+            super::restore_preferences(&mut normal.app, Some(&stored_ui), Some(&after), false);
+            assert_eq!(normal.app.preferences.window_system, choice);
+            assert_eq!(normal.app.preferences.graphics_adapter, "Selected GPU");
+            assert_eq!(normal.app.preferences.display_quality, "fine", "normal startup still restores UI settings");
+        }
+    }
+
+    #[test]
+    fn missing_or_invalid_startup_window_system_uses_automatic() {
+        use serde_json::json;
+
+        for saved in [None, Some(json!(null)), Some(json!({})), Some(json!({"window_system": 7})), Some(json!({"window_system": "unknown"}))] {
+            let mut app = super::SolveApp::new(super::Session::default(), super::Services::default());
+            app.preferences.window_system = "wayland".into();
+            super::restore_graphics_preferences(&mut app, saved.as_ref());
+            assert_eq!(app.preferences.window_system, "auto", "{saved:?}");
+        }
+    }
+
+    /// A manual graphics.json choice wins over stale app.ron preferences and survives an
+    /// unrelated graphics edit (#10116), including on a fresh launch with no saved UI state.
+    #[test]
+    fn startup_window_system_survives_changing_antialiasing() {
+        use serde_json::{Value, json};
+        use solidcraft_ui_egui::scenario::Harness;
+
+        for choice in ["wayland", "x11", "auto", " wayland ", " x11 "] {
+            for stale in [None, Some("auto"), Some("wayland"), Some("x11")] {
+                let mut h = Harness::new();
+                if let Some(stale) = stale {
+                    h.app.load_prefs(&json!({"preferences": {"window_system": stale}}).to_string());
+                }
+                let path = h.dir.join("graphics.json");
+                std::fs::write(&path, json!({"window_system": choice, "backend": "vulkan", "adapter": "Selected GPU", "msaa": 4}).to_string())
+                    .unwrap();
+                h.app.services.graphics_path = Some(path.to_string_lossy().into_owned());
+                let saved: Value = serde_json::from_str(&std::fs::read_to_string(&path).unwrap()).unwrap();
+                super::restore_graphics_preferences(&mut h.app, Some(&saved));
+
+                let result = h.call("ui.prefs", json!({"msaa": 2}));
+                assert_eq!(result["ok"], true, "{result}");
+                let after: Value = serde_json::from_str(&std::fs::read_to_string(&path).unwrap()).unwrap();
+                assert_eq!(after["window_system"], choice.trim(), "saved choice {choice:?}, stale UI choice {stale:?}");
+                assert_eq!(result["result"]["window_system"], choice.trim());
+                assert_eq!(after["msaa"], 2);
+                assert_eq!(after["backend"], "vulkan");
+                assert_eq!(after["adapter"], "Selected GPU");
+            }
+        }
+    }
+
    #[test]
    fn first_launch_adopts_the_previous_release_settings() {
        let d = std::env::temp_dir().join(format!("solidcraft-adopt-settings-{}", std::process::id()));
@@ -434,7 +434,7 @@ mod tests {
        let mut app = SolveApp::new(solidcraft_engine::Session::default(), solidcraft_ui_egui::Services::default());
        app.home.open = false;
        let ctx = Context::default();
-        let _ = ctx.run_ui(egui::RawInput { focused: true, ..Default::default() }, |_| {});
+        ctx.run_ui(egui::RawInput { focused: true, ..Default::default() }, |_| {}).textures_delta.clear();
        let mut bridge = NavBridge { shared: Arc::new(Mutex::new(Shared::default())) };
        let queue = |bridge: &NavBridge| {
            let mut shared = bridge.shared.lock().unwrap();
@@ -1914,6 +1914,7 @@ mod tests {

    fn wheel() -> egui::Event {
        egui::Event::MouseWheel {
+            source: egui::MouseWheelSource::Unknown,
            unit: egui::MouseWheelUnit::Line,
            delta: egui::vec2(0.0, -1.0),
            modifiers: Default::default(),
@@ -40,10 +40,10 @@ fn connect_to(path: &Path) -> Option<UnixStream> {

 /// The axes of one record, or `None` for a record that is not motion.
 ///
-/// The daemon's frame is right-handed with x to the right, y away from the user and z up; ours is
-/// the device's raw one, x right, y towards the user and z down, so y and z (and the rotations
-/// about them) change sign. With nothing set in `spnavcfg` the two give the same motion; what
-/// the user swaps or inverts there then carries over.
+/// The daemon reports x to the right, y up and z away from the user; our raw HID frame is x
+/// right, y towards the user and z down. Swap and negate y/z and ry/rz to match that frame.
+/// With nothing set in `spnavcfg` the two readers give the same motion; what the user swaps
+/// or inverts there then carries over.
 fn decode(record: &[u8; RECORD_BYTES]) -> Option<Axes> {
    let mut data = [0_i32; 8];
    for (slot, bytes) in data.iter_mut().zip(record.as_chunks::<4>().0) {
@@ -51,8 +51,8 @@ fn decode(record: &[u8; RECORD_BYTES]) -> Option<Axes> {
    }
    let [kind, x, y, z, rx, ry, rz, _period] = data;
    (kind == 0).then(|| Axes {
-        translation: [unit(x), unit(-i64::from(y)), unit(-i64::from(z))],
-        rotation: [unit(rx), unit(-i64::from(ry)), unit(-i64::from(rz))],
+        translation: [unit(x), unit(-i64::from(z)), unit(-i64::from(y))],
+        rotation: [unit(rx), unit(-i64::from(rz)), unit(-i64::from(ry))],
    })
 }

@@ -149,22 +149,28 @@ mod tests {

    #[test]
    fn motion_records_become_axes_in_the_devices_raw_frame() {
-        // Full deflection of the daemon's x, y and z is the device's full scale, and y and z flip.
-        assert_eq!(decode(&record([0, 500, 500, 500, 0, 0, 0, 8])), Some(Axes { translation: [350, -350, -350], rotation: [0; 3] }));
-        // Rotations follow translations: right-handed in both frames, so ry and rz flip as y and z do.
-        assert_eq!(decode(&record([0, 0, 0, 0, 250, 250, 250, 8])), Some(Axes { translation: [0; 3], rotation: [175, -175, -175] }));
+        // Each daemon axis reaches only its matching raw HID axis, in both directions.
+        for (daemon_axis, raw_axis, sign) in [(0, 0, 1), (1, 2, -1), (2, 1, -1), (3, 3, 1), (4, 5, -1), (5, 4, -1)] {
+            for value in [-500, 500] {
+                let mut data = [0; 8];
+                data[daemon_axis + 1] = value;
+                let mut expected = [0; 6];
+                expected[raw_axis] = sign * (value * 350 / 500) as i16;
+                assert_eq!(decode(&record(data)), Some(Axes::from(expected)), "daemon axis {daemon_axis}, value {value}");
+            }
+        }
        // Rest is a motion record of zeros.
        assert_eq!(decode(&record([0, 0, 0, 0, 0, 0, 0, 1200])), Some(Axes::default()));
    }

    #[test]
    fn what_spnavcfg_swaps_reaches_the_view() {
-        // The daemon sends a push away as y. With Y and Z swapped in spnavcfg it sends the same push
-        // as z, and the view gets a lift (raw z) instead of the zoom (raw y).
-        let before = decode(&record([0, 0, 500, 0, 0, 0, 0, 8])).map(|axes| axes.translation);
-        let after = decode(&record([0, 0, 0, 500, 0, 0, 0, 8])).map(|axes| axes.translation);
-        assert_eq!(before, Some([0, -350, 0]));
-        assert_eq!(after, Some([0, 0, -350]));
+        // A push away is daemon z (raw y); swapping Y/Z makes it a lift (raw z).
+        // The same swap changes a sideways tilt (daemon rz, raw ry) into a twist (raw rz).
+        let before = decode(&record([0, 0, 0, 500, 0, 0, 250, 8]));
+        let after = decode(&record([0, 0, 500, 0, 0, 250, 0, 8]));
+        assert_eq!(before, Some(Axes { translation: [0, -350, 0], rotation: [0, -175, 0] }));
+        assert_eq!(after, Some(Axes { translation: [0, 0, -350], rotation: [0, 0, -175] }));
    }

    #[test]
@@ -179,7 +185,7 @@ mod tests {
        // Nothing overflows on the extremes of `i32`.
        let extreme = decode(&record([0, i32::MIN, i32::MIN, i32::MAX, i32::MAX, i32::MIN, i32::MIN, -1]));
        assert_eq!(extreme.map(|axes| axes.translation[0]), Some(i16::MIN));
-        assert_eq!(extreme.map(|axes| axes.translation[1]), Some(i16::MAX));
+        assert_eq!(extreme.map(|axes| axes.translation), Some([i16::MIN, i16::MIN, i16::MAX]));
        assert_eq!(extreme.map(|axes| axes.rotation[0]), Some(i16::MAX));
    }

@@ -311,13 +311,18 @@ pub const SYSTEM_VERSION_COMPAT_ENV: &str = "SYSTEM_VERSION_COMPAT";
 #[cfg(target_os = "macos")]
 pub const OCLP_NVRAM_KEY: &str = "4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:OCLP-Version";

+/// Where macOS keeps its `nvram` tool.
+#[cfg(target_os = "macos")]
+const NVRAM_TOOL: &str = "/usr/sbin/nvram";
+
 /// `true` if the OCLP NVRAM key is present on this system.
 ///
-/// Runs `nvram <key>` and treats exit 0 as present. Any error (missing binary,
-/// permission denied, key absent) returns `false` — this is a best-effort probe.
+/// Runs `/usr/sbin/nvram <key>` and treats exit 0 as present. The full path keeps a `PATH` that
+/// lacks `/usr/sbin`, or lists a look-alike first, from changing the answer. Any error (missing
+/// binary, permission denied, key absent) returns `false`: this is a best-effort probe.
 #[cfg(target_os = "macos")]
 pub fn oclp_nvram_present() -> bool {
-    std::process::Command::new("nvram").arg(OCLP_NVRAM_KEY).output().map(|o| o.status.success()).unwrap_or(false)
+    std::process::Command::new(NVRAM_TOOL).arg(OCLP_NVRAM_KEY).output().map(|o| o.status.success()).unwrap_or(false)
 }

 /// Whether to re-launch with `SYSTEM_VERSION_COMPAT=1`: it is not set yet and OCLP shows through
@@ -334,8 +339,8 @@ fn compat_wanted(compat_set: bool, nvram: impl FnOnce() -> bool) -> bool {
 ///
 /// `SYSTEM_VERSION_COMPAT=1` must be present **before** the process starts: setting it
 /// with `std::env::set_var` inside `main` is too late because the macOS frameworks have
-/// already queried the OS version by then. Re-launching is the only safe approach that
-/// works without `unsafe` (a true `execve` replacement would require it).
+/// already queried the OS version by then, so the program starts itself again with the variable
+/// set and waits for that child.
 ///
 /// Returns `Ok(false)` immediately when:
 /// - `SYSTEM_VERSION_COMPAT` is already set (re-launched process, no loop), or
@@ -352,7 +357,7 @@ pub fn relaunch_with_version_compat() -> Result<bool, String> {
        return Ok(false);
    }
    log::info!("startup: OCLP detected; re-launching with {}=1", SYSTEM_VERSION_COMPAT_ENV);
-    eprintln!("SolidCraft: OCLP detected; re-launching with {}=1", SYSTEM_VERSION_COMPAT_ENV);
+    solidcraft_engine::note!("SolidCraft: OCLP detected; re-launching with {}=1", SYSTEM_VERSION_COMPAT_ENV);
    let exe = std::env::current_exe().map_err(|e| format!("could not find own executable: {e}"))?;
    let status = std::process::Command::new(&exe)
        .args(std::env::args_os().skip(1))
@@ -17,6 +17,7 @@ assets/
    ui/design/tools/                 # authoring bases, checks and included review app
    ui/source/                       # Rust viewport glyphs, markers and navigation
  branding/web/source/og.png          # shared social preview card
+  branding/logo/                     # print/web logo files; guide in branding/README.md
  styles/ui/palettes.rs               # light/dark defaults
  styles/web/loading.css             # web loading/canvas styles
  appearances/library.rs             # built-in visual presets
@@ -0,0 +1,73 @@
+# SolidCraft brand kit
+
+Logo files for stickers, shirts, the web and social posts. Everything in `logo/` is drawn
+from the app icon (`assets/icons/app/macos/source/SolidCraft.icon/Assets/03-solid-blue-cutout.svg`),
+which is also the last frame of the loading animation (`assets/styles/web/loading-logo.svg`).
+The SVGs are plain paths: no scripts, fonts, animation or external links, so any printer can use them.
+
+## Files
+
+| File | Use it for |
+|---|---|
+| `logo/solidcraft-mark.svg` | The mark in full colour. First choice for stickers, print and the web. |
+| `logo/solidcraft-mark-mono-black.svg` | One-colour print on light material: screen-printed shirts, stamps, engraving, vinyl. |
+| `logo/solidcraft-mark-mono-white.svg` | One-colour print on dark material, such as a white print on a dark shirt. |
+| `logo/solidcraft-mark-512.png`, `-1024.png`, `-2048.png` | Transparent square PNGs for places that don't take SVG: avatars, social posts, slides, print shops that ask for a bitmap (send the 2048). |
+| `logo/solidcraft-wordmark.svg` | The name on its own, outlined to paths. |
+| `logo/solidcraft-lockup-horizontal.svg` | Mark and name side by side: headers, banners, shirt fronts, wide stickers. |
+| `web/source/og.png` | The existing link preview card for the docs site. |
+
+The gaps between the faces are part of the logo. In the colour and one-colour files they are
+transparent, so the material shows through. For a die-cut sticker, cut around the outer shape
+and let the backing colour (white is best) fill the gaps.
+
+## Colours
+
+The mark's five faces each use a two-stop gradient from the icon source:
+
+| Face | From | To |
+|---|---|---|
+| Top | `#51adff` | `#2b83f1` |
+| Left | `#258df5` | `#1461da` |
+| Right | `#1b66cf` | `#124596` |
+| Lower step (top) | `#459fff` | `#2379e7` |
+| Upper step (inner side) | `#1d63c6` | `#15499e` |
+
+Other colours, all already used in the project:
+
+| Colour | Hex | Where it comes from |
+|---|---|---|
+| Wordmark blue | `#15499e` | loading logo `--word` |
+| Interface accent | `#2678da` | light theme `accent` token (`assets/styles/ui/palettes.rs`) |
+| Light background | `#e8ebf0` | web loading screen (`assets/styles/web/loading.css`) |
+| Dark background | `#1f232b` | dark theme `file_background` token |
+| Black / white | `#000000` / `#ffffff` | one-colour versions only |
+
+If a printer can't do gradients, use the one-colour files, or fill every face with `#2678da`.
+
+## Clear space and size
+
+- Keep empty space around the mark of at least one fifth of its height on every side. Treat
+  the lockup the same way, measured from the mark.
+- Smallest mark: 16 px tall on screen, 12 mm tall in print. Below that the gaps fill in.
+- Smallest lockup: 120 px wide on screen, 40 mm wide in print.
+
+## Don'ts
+
+- Don't recolour it outside the colours above.
+- Don't stretch, squash, rotate, skew or crop it. Scale it evenly.
+- Don't add shadows, outlines, glows, bevels or other effects.
+- Don't fill or close the gaps between the faces, or move the faces apart.
+- Don't rearrange the lockup, retype the name in another font, or put the mark on a busy
+  background where it loses contrast.
+
+## Name and logo
+
+The SolidCraft code and these files are licensed MIT OR Apache-2.0 (see the [README](../../README.md#licence)),
+so you may copy and change them. The name SolidCraft and this logo identify the SolidCraft
+project. Use them to refer to the project, for example in an article, a talk, or a sticker for a
+meetup. If you publish a fork or a modified build, give it its own name and logo so people
+don't mistake it for SolidCraft.
+
+The wordmark is set in IBM Plex Sans Bold (SIL Open Font License 1.1, the interface font in
+`assets/fonts/ibm-plex-sans/`) and outlined, so you don't need the font to print it.
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="116.406 53.364 2748.71 904.436" width="2749" height="904" role="img"><title>SolidCraft</title><defs><linearGradient id="sc1" x1="619.14" y1="179.734" x2="694.687" y2="396.761" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#1d63c6"/><stop offset="1" stop-color="#15499e"/></linearGradient><linearGradient id="sc2" x1="619.14" y1="413.244" x2="790.839" y2="605.547" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#459fff"/><stop offset="1" stop-color="#2379e7"/></linearGradient><linearGradient id="sc3" x1="632.876" y1="399.508" x2="783.971" y2="968.175" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#1b66cf"/><stop offset="1" stop-color="#124596"/></linearGradient><linearGradient id="sc4" x1="207.063" y1="303.357" x2="426.837" y2="968.175" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#258df5"/><stop offset="1" stop-color="#1461da"/></linearGradient><linearGradient id="sc5" x1="385.63" y1="53.364" x2="522.989" y2="510.769" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#51adff"/><stop offset="1" stop-color="#2b83f1"/></linearGradient></defs><g><path d="M547.883 282.66 L709.797 188.211 L709.797 375.985 Z" fill="url(#sc1)"/><path d="M727.797 593.626 L727.797 407.136 L889.571 500.381 Z" fill="url(#sc2)"/><path d="M530 521.17 L691.797 427.912 L691.797 655.928 L907.594 531.545 L907.594 740.159 L530 957.8 Z" fill="url(#sc3)"/><path d="M116.406 510.769 L116.406 303.529 L494 521.17 L494 957.8 L314.203 854.167 L314.203 624.777 Z" fill="url(#sc4)"/><path d="M134.374 272.334 L512 53.364 L691.828 157.015 L476.117 282.846 L673.752 396.761 L512 489.993 Z" fill="url(#sc5)"/></g><path fill="#15499e" transform="translate(1092.78 632.20) scale(0.36281)" d="M303 12Q212 12 147.5 -20Q83 -52 38 -101L138 -202Q173 -162 217.5 -142Q262 -122 313 -122Q369 -122 396 -145Q423 -168 423 -206Q423 -225 416.5 -240.5Q410 -256 392.5 -266.5Q375 -277 342 -281L273 -290Q200 -300 152.5 -326.5Q105 -353 82 -396.5Q59 -440 59 -498Q59 -561 90.5 -608.5Q122 -656 180.5 -683Q239 -710 321 -710Q400 -710 460 -684.5Q520 -659 563 -612L462 -510Q437 -539 401.5 -557.5Q366 -576 312 -576Q261 -576 236 -558Q211 -540 211 -508Q211 -484 219.5 -469Q228 -454 246.5 -446Q265 -438 294 -433L363 -422Q435 -411 482 -385Q529 -359 552 -317Q575 -275 575 -215Q575 -148 543.5 -97Q512 -46 451 -17Q390 12 303 12ZM926 12Q849 12 794 -21.5Q739 -55 709.5 -117Q680 -179 680 -263Q680 -348 709.5 -409Q739 -470 794 -503.5Q849 -537 926 -537Q1003 -537 1058 -503.5Q1113 -470 1142.5 -409Q1172 -348 1172 -263Q1172 -179 1142.5 -117Q1113 -55 1058 -21.5Q1003 12 926 12ZM926 -105Q970 -105 994 -132.5Q1018 -160 1018 -209V-316Q1018 -366 994 -393Q970 -420 926 -420Q883 -420 858.5 -393Q834 -366 834 -316V-209Q834 -160 858.5 -132.5Q883 -105 926 -105ZM1511 0H1444Q1368 0 1332.5 -37Q1297 -74 1297 -144V-740H1445V-115H1511ZM1694 -581Q1649 -581 1628.5 -602Q1608 -623 1608 -654V-676Q1608 -708 1628.5 -728.5Q1649 -749 1694 -749Q1739 -749 1759.5 -728.5Q1780 -708 1780 -676V-654Q1780 -623 1759.5 -602Q1739 -581 1694 -581ZM1620 0V-525H1768V0ZM2248 0V-88H2243Q2232 -45 2192.5 -16.5Q2153 12 2102 12Q2036 12 1991 -19.5Q1946 -51 1923 -112.5Q1900 -174 1900 -263Q1900 -352 1923 -413Q1946 -474 1991 -505.5Q2036 -537 2102 -537Q2153 -537 2192.5 -509Q2232 -481 2243 -437H2248V-740H2396V0ZM2151 -108Q2179 -108 2201 -117Q2223 -126 2235.5 -143.5Q2248 -161 2248 -185V-340Q2248 -364 2235.5 -381.5Q2223 -399 2201 -408Q2179 -417 2151 -417Q2109 -417 2081.5 -387.5Q2054 -358 2054 -308V-217Q2054 -168 2081.5 -138Q2109 -108 2151 -108ZM2844 12Q2750 12 2680.5 -28Q2611 -68 2573 -147Q2535 -226 2535 -344Q2535 -462 2573 -543.5Q2611 -625 2680.5 -667.5Q2750 -710 2844 -710Q2940 -710 3003.5 -670Q3067 -630 3105 -546L2974 -478Q2961 -522 2930.5 -548.5Q2900 -575 2844 -575Q2777 -575 2736.5 -531.5Q2696 -488 2696 -405V-293Q2696 -211 2736.5 -167Q2777 -123 2844 -123Q2900 -123 2933.5 -153.5Q2967 -184 2983 -227L3107 -155Q3068 -76 3004 -32Q2940 12 2844 12ZM3373 0H3225V-525H3373V-411H3378Q3384 -440 3400 -466Q3416 -492 3443.5 -508.5Q3471 -525 3512 -525H3538V-387H3501Q3458 -387 3429.5 -379.5Q3401 -372 3387 -355Q3373 -338 3373 -307ZM4105 0H4023Q3996 0 3972.5 -13.5Q3949 -27 3935 -53.5Q3921 -80 3921 -117V-130L3953 -92H3917Q3905 -41 3864 -14.5Q3823 12 3763 12Q3684 12 3642 -30.5Q3600 -73 3600 -141Q3600 -197 3627.5 -233Q3655 -269 3705.5 -287Q3756 -305 3825 -305H3908V-338Q3908 -376 3888 -398.5Q3868 -421 3821 -421Q3777 -421 3751 -402Q3725 -383 3708 -359L3620 -437Q3652 -484 3701 -510.5Q3750 -537 3832 -537Q3943 -537 3999.5 -487.5Q4056 -438 4056 -345V-115H4105ZM3908 -221H3836Q3793 -221 3771 -206Q3749 -191 3749 -162V-147Q3749 -119 3767 -105Q3785 -91 3818 -91Q3843 -91 3863 -98Q3883 -105 3895.5 -120Q3908 -135 3908 -159ZM4250 0V-410H4176V-525H4250V-587Q4250 -663 4290.5 -701.5Q4331 -740 4407 -740H4503V-625H4398V-525H4503V-410H4398V0ZM4877 0H4789Q4713 0 4673 -39Q4633 -78 4633 -153V-410H4559V-525H4596Q4626 -525 4637 -539.5Q4648 -554 4648 -581V-667H4781V-525H4885V-410H4781V-115H4877Z"/></svg>
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="116.406 53.364 791.188 904.436" width="791" height="904" role="img"><title>SolidCraft</title><g fill="#000000"><path d="M547.883 282.66 L709.797 188.211 L709.797 375.985 Z"/><path d="M727.797 593.626 L727.797 407.136 L889.571 500.381 Z"/><path d="M530 521.17 L691.797 427.912 L691.797 655.928 L907.594 531.545 L907.594 740.159 L530 957.8 Z"/><path d="M116.406 510.769 L116.406 303.529 L494 521.17 L494 957.8 L314.203 854.167 L314.203 624.777 Z"/><path d="M134.374 272.334 L512 53.364 L691.828 157.015 L476.117 282.846 L673.752 396.761 L512 489.993 Z"/></g></svg>
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="116.406 53.364 791.188 904.436" width="791" height="904" role="img"><title>SolidCraft</title><g fill="#ffffff"><path d="M547.883 282.66 L709.797 188.211 L709.797 375.985 Z"/><path d="M727.797 593.626 L727.797 407.136 L889.571 500.381 Z"/><path d="M530 521.17 L691.797 427.912 L691.797 655.928 L907.594 531.545 L907.594 740.159 L530 957.8 Z"/><path d="M116.406 510.769 L116.406 303.529 L494 521.17 L494 957.8 L314.203 854.167 L314.203 624.777 Z"/><path d="M134.374 272.334 L512 53.364 L691.828 157.015 L476.117 282.846 L673.752 396.761 L512 489.993 Z"/></g></svg>
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="116.406 53.364 791.188 904.436" width="791" height="904" role="img"><title>SolidCraft</title><defs><linearGradient id="sc1" x1="619.14" y1="179.734" x2="694.687" y2="396.761" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#1d63c6"/><stop offset="1" stop-color="#15499e"/></linearGradient><linearGradient id="sc2" x1="619.14" y1="413.244" x2="790.839" y2="605.547" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#459fff"/><stop offset="1" stop-color="#2379e7"/></linearGradient><linearGradient id="sc3" x1="632.876" y1="399.508" x2="783.971" y2="968.175" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#1b66cf"/><stop offset="1" stop-color="#124596"/></linearGradient><linearGradient id="sc4" x1="207.063" y1="303.357" x2="426.837" y2="968.175" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#258df5"/><stop offset="1" stop-color="#1461da"/></linearGradient><linearGradient id="sc5" x1="385.63" y1="53.364" x2="522.989" y2="510.769" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#51adff"/><stop offset="1" stop-color="#2b83f1"/></linearGradient></defs><g><path d="M547.883 282.66 L709.797 188.211 L709.797 375.985 Z" fill="url(#sc1)"/><path d="M727.797 593.626 L727.797 407.136 L889.571 500.381 Z" fill="url(#sc2)"/><path d="M530 521.17 L691.797 427.912 L691.797 655.928 L907.594 531.545 L907.594 740.159 L530 957.8 Z" fill="url(#sc3)"/><path d="M116.406 510.769 L116.406 303.529 L494 521.17 L494 957.8 L314.203 854.167 L314.203 624.777 Z" fill="url(#sc4)"/><path d="M134.374 272.334 L512 53.364 L691.828 157.015 L476.117 282.846 L673.752 396.761 L512 489.993 Z" fill="url(#sc5)"/></g></svg>
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="38.0 -749.0 4847.0 761.0" width="4847" height="761" role="img"><title>SolidCraft</title><path fill="#15499e" d="M303 12Q212 12 147.5 -20Q83 -52 38 -101L138 -202Q173 -162 217.5 -142Q262 -122 313 -122Q369 -122 396 -145Q423 -168 423 -206Q423 -225 416.5 -240.5Q410 -256 392.5 -266.5Q375 -277 342 -281L273 -290Q200 -300 152.5 -326.5Q105 -353 82 -396.5Q59 -440 59 -498Q59 -561 90.5 -608.5Q122 -656 180.5 -683Q239 -710 321 -710Q400 -710 460 -684.5Q520 -659 563 -612L462 -510Q437 -539 401.5 -557.5Q366 -576 312 -576Q261 -576 236 -558Q211 -540 211 -508Q211 -484 219.5 -469Q228 -454 246.5 -446Q265 -438 294 -433L363 -422Q435 -411 482 -385Q529 -359 552 -317Q575 -275 575 -215Q575 -148 543.5 -97Q512 -46 451 -17Q390 12 303 12ZM926 12Q849 12 794 -21.5Q739 -55 709.5 -117Q680 -179 680 -263Q680 -348 709.5 -409Q739 -470 794 -503.5Q849 -537 926 -537Q1003 -537 1058 -503.5Q1113 -470 1142.5 -409Q1172 -348 1172 -263Q1172 -179 1142.5 -117Q1113 -55 1058 -21.5Q1003 12 926 12ZM926 -105Q970 -105 994 -132.5Q1018 -160 1018 -209V-316Q1018 -366 994 -393Q970 -420 926 -420Q883 -420 858.5 -393Q834 -366 834 -316V-209Q834 -160 858.5 -132.5Q883 -105 926 -105ZM1511 0H1444Q1368 0 1332.5 -37Q1297 -74 1297 -144V-740H1445V-115H1511ZM1694 -581Q1649 -581 1628.5 -602Q1608 -623 1608 -654V-676Q1608 -708 1628.5 -728.5Q1649 -749 1694 -749Q1739 -749 1759.5 -728.5Q1780 -708 1780 -676V-654Q1780 -623 1759.5 -602Q1739 -581 1694 -581ZM1620 0V-525H1768V0ZM2248 0V-88H2243Q2232 -45 2192.5 -16.5Q2153 12 2102 12Q2036 12 1991 -19.5Q1946 -51 1923 -112.5Q1900 -174 1900 -263Q1900 -352 1923 -413Q1946 -474 1991 -505.5Q2036 -537 2102 -537Q2153 -537 2192.5 -509Q2232 -481 2243 -437H2248V-740H2396V0ZM2151 -108Q2179 -108 2201 -117Q2223 -126 2235.5 -143.5Q2248 -161 2248 -185V-340Q2248 -364 2235.5 -381.5Q2223 -399 2201 -408Q2179 -417 2151 -417Q2109 -417 2081.5 -387.5Q2054 -358 2054 -308V-217Q2054 -168 2081.5 -138Q2109 -108 2151 -108ZM2844 12Q2750 12 2680.5 -28Q2611 -68 2573 -147Q2535 -226 2535 -344Q2535 -462 2573 -543.5Q2611 -625 2680.5 -667.5Q2750 -710 2844 -710Q2940 -710 3003.5 -670Q3067 -630 3105 -546L2974 -478Q2961 -522 2930.5 -548.5Q2900 -575 2844 -575Q2777 -575 2736.5 -531.5Q2696 -488 2696 -405V-293Q2696 -211 2736.5 -167Q2777 -123 2844 -123Q2900 -123 2933.5 -153.5Q2967 -184 2983 -227L3107 -155Q3068 -76 3004 -32Q2940 12 2844 12ZM3373 0H3225V-525H3373V-411H3378Q3384 -440 3400 -466Q3416 -492 3443.5 -508.5Q3471 -525 3512 -525H3538V-387H3501Q3458 -387 3429.5 -379.5Q3401 -372 3387 -355Q3373 -338 3373 -307ZM4105 0H4023Q3996 0 3972.5 -13.5Q3949 -27 3935 -53.5Q3921 -80 3921 -117V-130L3953 -92H3917Q3905 -41 3864 -14.5Q3823 12 3763 12Q3684 12 3642 -30.5Q3600 -73 3600 -141Q3600 -197 3627.5 -233Q3655 -269 3705.5 -287Q3756 -305 3825 -305H3908V-338Q3908 -376 3888 -398.5Q3868 -421 3821 -421Q3777 -421 3751 -402Q3725 -383 3708 -359L3620 -437Q3652 -484 3701 -510.5Q3750 -537 3832 -537Q3943 -537 3999.5 -487.5Q4056 -438 4056 -345V-115H4105ZM3908 -221H3836Q3793 -221 3771 -206Q3749 -191 3749 -162V-147Q3749 -119 3767 -105Q3785 -91 3818 -91Q3843 -91 3863 -98Q3883 -105 3895.5 -120Q3908 -135 3908 -159ZM4250 0V-410H4176V-525H4250V-587Q4250 -663 4290.5 -701.5Q4331 -740 4407 -740H4503V-625H4398V-525H4503V-410H4398V0ZM4877 0H4789Q4713 0 4673 -39Q4633 -78 4633 -153V-410H4559V-525H4596Q4626 -525 4637 -539.5Q4648 -554 4648 -581V-667H4781V-525H4885V-410H4781V-115H4877Z"/></svg>
@@ -60,7 +60,6 @@ circle_ttt	false
 close	false
 coil	false
 colored_components	false
-colored_components_off	false
 combine	false
 compare	false
 component	false
@@ -161,6 +160,7 @@ min_radius	false
 mirror	false
 motion_link	false
 move	false
+nav_settings	false
 new	false
 normal	false
 offset	false
@@ -1,21 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 64 64">
-  <title>Disable component colors</title>
-  <path d="M9.235 17.706L15.059 20.882L15.059 48.941L9.235 44.926Z" fill="#328bd3"/>
-  <path d="M35.176 9.235L15.059 20.882L15.059 48.941L36.765 35.139Z" fill="#236ead"/>
-  <path d="M29.046 5L35.176 8.176L15.196 19.718L9.066 16.541Z" fill="#b9ddf8"/>
-  <path d="M29.046 5.529L35.176 8.706L35.176 36.235L15.059 49.471L9.235 45.765L9.066 17.071Z" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M9.066 17.6L15.059 20.882L34.647 9.235" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M15.059 20.882L15.059 47.067" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M32.222 18.595L44.949 25.944L44.949 51.122L32.222 43.774Z" fill="#328bd3"/>
-  <path d="M54.934 20.173L44.949 25.944L44.949 51.122L54.934 45.352Z" fill="#236ead"/>
-  <path d="M42.059 12.412L54.934 20.173L44.949 25.944L32 17.706Z" fill="#b9ddf8"/>
-  <path d="M41.159 11.766L54.934 20.173L54.934 45.352L44.949 51.122L31.164 42.715L31.164 17.536Z" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M32.222 18.595L44.949 25.944L54.934 20.173" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M44.949 25.944L44.949 51.122" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M18.299 39.062L31.015 46.411L31.015 59L18.299 51.652Z" fill="#328bd3"/>
-  <path d="M41.921 40.121L31.015 46.411L31.015 59L41.921 52.711Z" fill="#236ead"/>
-  <path d="M29.194 32.773L41.921 40.121L31.015 46.411L18.299 39.062Z" fill="#b9ddf8"/>
-  <path d="M29.194 32.773L41.921 40.121L41.921 52.711L31.015 59L18.299 51.652L18.299 39.062Z" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M18.299 39.062L31.015 46.411L41.921 40.121" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-  <path d="M31.015 46.411L31.015 59" fill="none" stroke="#34465b" stroke-width="2.55" stroke-linecap="round" stroke-linejoin="round"/>
-</svg>
@@ -79,17 +79,6 @@ pub(crate) fn snap_hint(painter: &egui::Painter, c: Pos2, kind: SnapKind, col: C
    painter.circle_filled(c, 1.3, col);
 }

-/// A placed hole's drag handle: a ring round the hole's centre with a cross through it, filled
-/// while it is hovered or dragged.
-pub(crate) fn hole_handle(painter: &egui::Painter, c: Pos2, col: Color32, hot: bool) {
-    let ic = Tokens::get().icons;
-    let r = 6.0;
-    painter.circle_filled(c, r + 3.5, ic.marker_halo);
-    painter.circle(c, r, if hot { col } else { col.gamma_multiply(0.35) }, Stroke::new(1.6, col));
-    let ink = Stroke::new(1.3, if hot { ic.highlight } else { col });
-    painter.line_segment([c - vec2(r + 3.0, 0.0), c + vec2(r + 3.0, 0.0)], ink);
-    painter.line_segment([c - vec2(0.0, r + 3.0), c + vec2(0.0, r + 3.0)], ink);
-}
 pub(crate) fn glyph_icon(name: &str) -> Option<&'static str> {
    Some(match name {
        "Coincident" => "c_coincident",
@@ -55,8 +55,7 @@ pub(crate) fn face_text(painter: &egui::Painter, face: &Facet, ink: Color32, fon
    painter.ctx().add_plugin(LabelAtlas);
    let text = Shape::Text(egui::epaint::TextShape::new(Pos2::ZERO, galley, ink));
    let atlas = painter.ctx().fonts(|f| f.font_image_size());
-    let primitives =
-        painter.ctx().tessellate(vec![egui::epaint::ClippedShape { clip_rect: Rect::EVERYTHING, shape: text }], painter.ctx().pixels_per_point());
+    let primitives = painter.ctx().tessellate(vec![egui::epaint::ClippedShape::new(Rect::EVERYTHING, text)], painter.ctx().pixels_per_point());
    for primitive in primitives {
        if let egui::epaint::Primitive::Mesh(mut mesh) = primitive.primitive {
            mesh.texture_id = LABEL_PIXELS;
@@ -85,6 +85,7 @@
  "Bottom Right": "أسفل اليمين",
  "Boundary": "الحد",
  "Bounding box": "الصندوق المحيط",
+  "Bridge": "جسر",
  "CHECK": "تحقق",
  "COMPONENTS": "المكوّنات",
  "CONFIGURATIONS": "التكوينات",
@@ -628,6 +629,8 @@
  "Suppress Selected Folders": "تعطيل المجلدات المحددة",
  "Suppressed": "مُعطّل",
  "Surface": "السطح",
+  "Surface or face": "سطح أو وجه",
+  "Surface or faces": "سطح أو أوجه",
  "Surface, or faces to turn over": "السطح، أو الأوجه المراد قلبها",
  "Surfaces": "الأسطح",
  "Swap Ends": "تبديل الطرفين",
@@ -641,6 +644,7 @@
  "Target": "الهدف",
  "Target Body": "الجسم الهدف",
  "Target Face (optional)": "الوجه الهدف (اختياري)",
+  "Target edges": "الحواف المستهدفة",
  "Tear": "تمزيق",
  "Technical details": "التفاصيل التقنية",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "الرسم المتقطع دليل مستوى محفوظ. حدد وجهًا جديدًا لإصلاح الارتباط.",
@@ -648,6 +652,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "يجب أن يكون الاتجاه محورًا أو منحنى رسم مستقيمًا يقع في مستوى الرسم",
  "The mirror line cannot also be mirrored": "لا يمكن عكس خط المرآة نفسه",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "يجب أن يكون خط المرآة منحنى مستقيمًا من هذا الرسم، وليس أحد محاور نقطة الأصل",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "محور الأصل عمودي على مستوى الرسم، لذا ليس له خط في المستوى",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "نسخة المؤلف المحفوظة مفقودة. حدد موضع مؤلف صالحًا قبل إعادة الربط.",
  "Then": "ثم",
  "These features will be deleted:": "ستُحذف هذه الميزات:",
@@ -739,27 +744,32 @@
  "a picked edge's body is gone": "جسم الحافة المحددة لم يعد موجودًا",
  "add a key for a joint first": "أضف أولًا مفتاحًا لمفصل",
  "ai.connected_toast": "أصبح SolidCraft متاحًا في {clients}. أعد تشغيلها لاستخدامه (التفضيلات > المساعد).",
+  "ai.http.allow": "السماح باتصال HTTP غير آمن",
+  "ai.http.confirm": "السماح لهذه النقطة الطرفية",
+  "ai.http.warning": "سيُرسَل مفتاح API والمحادثة دون تشفير. يمكن لأي شخص لديه وصول إلى الشبكة قراءتهما أو تغييرهما. استخدم هذا الخيار فقط على شبكة تثق بها.",
  "ai.prefs.allow_control": "السماح لوكلاء الذكاء الاصطناعي بالاتصال",
  "ai.prefs.allow_control_note": "قناة محلية (MCP). لا شيء يغادر هذا الحاسوب.\n\nيفتح قناة تحكم على هذا الحاسوب فقط (127.0.0.1، المنفذ 27878 أو أول منفذ متاح بعده). على البرنامج الذي يتصل أن يقدّم أيضًا رمزًا سريًا لا يقرؤه إلا حساب المستخدم الخاص بك، ويُنشأ من جديد عند كل تشغيل. يُطبّق في المرة القادمة التي يبدأ فيها SolidCraft. عند الإيقاف: لا شيء يستمع ما لم تشغّل SolidCraft مع --control.",
  "ai.prefs.availability": "التوفر",
  "ai.prefs.background_commands": "تشغيل الأوامر البطيئة في الخلفية",
  "ai.prefs.connect_apps": "إضافة SolidCraft إلى تطبيقات الذكاء الاصطناعي",
-  "ai.prefs.connect_apps_note": "إيقافه يزيل الإدخالات مجدداً.\n\nعند بدء تشغيل SolidCraft، يُضاف كخادم MCP إلى تطبيقات الذكاء الاصطناعي الموجودة على هذا الحاسوب (OpenCode وClaude Desktop وClaude Code وCursor وCodex وGemini CLI وCopilot CLI وWindsurf وZed وVS Code)، ليتمكن الوكيل من استخدامه دون أي إعداد. لا يُضاف إلا مُدخل solidcraft أو يُحدَّث مساره؛ ويُترك المُدخل الذي غيّرته كما هو، ويُنسخ الملف احتياطيًا أولًا. عند الإيقاف تُزال المُدخلات التي أضافها. الأمر «المساعدة > ربط مساعدي الذكاء الاصطناعي…» يفعل ذلك يدويًا.",
+  "ai.prefs.connect_apps_note": "إيقافه يزيل الإدخالات مجددًا.\n\nعند بدء تشغيل SolidCraft، يُضاف كخادم MCP إلى تطبيقات الذكاء الاصطناعي الموجودة على هذا الحاسوب (OpenCode وClaude Desktop وClaude Code وCursor وCodex وGemini CLI وCopilot CLI وWindsurf وZed وVS Code)، ليتمكن الوكيل من استخدامه دون أي إعداد. لا يُضاف إلا مُدخل solidcraft أو يُحدَّث مساره؛ ويُترك المُدخل الذي غيّرته كما هو، ويُنسخ الملف احتياطيًا أولًا. عند الإيقاف تُزال المُدخلات التي أضافها. الأمر «المساعدة > ربط مساعدي الذكاء الاصطناعي…» يفعل ذلك يدويًا.",
  "ai.prefs.connect_at_start": "توصيل آخر وكيل عند البدء",
  "ai.prefs.connect_at_start_note": "يبدأ في الخلفية الوكيل الذي اتصلت به آخر مرة (أو الوكيل الافتراضي) في كل مرة يبدأ فيها SolidCraft، ليكون جاهزًا للمحادثة. لا يحدث ذلك عند بدء SolidCraft مع --control. إذا تعذّر الاتصال، يعرض المساعد «فشل الاتصال» وزر «إعادة المحاولة».",
-  "ai.prefs.follow_camera": "اتباع الكاميرا",
+  "ai.prefs.follow_camera": "تتبّع الكاميرا",
  "ai.prefs.follow_camera_off": "تتبّع الكاميرا التلقائي متوقف.",
  "ai.prefs.follow_camera_on": "تتجه الكاميرا نحو الرسومات التي ينشئها الوكيل.",
+  "ai.prefs.instructions": "تعليمات مخصصة",
+  "ai.prefs.instructions_note": "تُرسَل إلى الوكيل في بداية كل محادثة، بعد تعليمات SolidCraft الخاصة: طريقتك المفضلة في العمل والقواعد التي يجب الالتزام بها. يسري أي تغيير من المحادثة التالية (اتصال أو محادثة جديدة).",
  "ai.prefs.intro": "وكلاء الذكاء الاصطناعي في SolidCraft.",
-  "ai.prefs.make_default": "تعيين كافتراضي",
+  "ai.prefs.make_default": "تعيين افتراضيًا",
  "ai.prefs.no_agents": "لا يوجد وكلاء بعد. أضف وكيلًا أو حدّث القائمة للعثور على الوكلاء المثبّتين.",
  "ai.prefs.no_saved_approvals": "لا توجد موافقات محفوظة.",
  "ai.prefs.open_at_start": "فتح المحادثة عند البدء",
  "ai.prefs.open_at_start_note": "يعرض لوحة المساعد (أو نافذتها المستقلة) في كل مرة يبدأ فيها SolidCraft. لا يحدث ذلك عند بدء SolidCraft مع --control.",
  "ai.prefs.override_all_warning": "قد يحفظ هذا الوكيل التصميم أو يكتب فوقه أو يصدّره أو يستبدله دون أن يسأل.",
-  "ai.prefs.permission_all": "فعل كل شيء",
-  "ai.prefs.permission_all_summary": "لا يسأل أبداً",
-  "ai.prefs.permission_ask": "السؤال أولاً",
+  "ai.prefs.permission_all": "تنفيذ كل شيء",
+  "ai.prefs.permission_all_summary": "لا يسأل أبدًا",
+  "ai.prefs.permission_ask": "السؤال أولًا",
  "ai.prefs.permission_ask_summary": "يسأل عن كل تغيير",
  "ai.prefs.permission_edits": "إجراء تعديلات",
  "ai.prefs.permission_edits_summary": "يعدّل بحرية ويسأل عن الباقي",
@@ -963,8 +973,7 @@
  "cmd.inspect_analysis": "تحليل العرض",
  "cmd.inspect_center_of_mass": "مركز الكتلة",
  "cmd.inspect_clearance": "الخلوص",
-  "cmd.inspect_colored_components": "تفعيل ألوان المكوّنات",
-  "cmd.inspect_colored_components_disable": "تعطيل ألوان المكوّنات",
+  "cmd.inspect_colored_components": "ألوان المكوّنات",
  "cmd.inspect_compare": "مقارنة الأجسام",
  "cmd.inspect_compare_picture": "مقارنة بصورة مرجعية",
  "cmd.inspect_continuity": "تحليل الاستمرارية",
@@ -1081,6 +1090,9 @@
  "cmd.render.compare.divider": "تحريك فاصل مقارنة التصيير",
  "cmd.render.result.discard": "تجاهل نتيجة التصيير",
  "cmd.render.result.select": "تحديد نتيجة التصيير",
+  "cmd.render.surface.import": "استيراد خرائط السطح",
+  "cmd.render.texture.list": "عرض صور السطح المضمّنة",
+  "cmd.render.texture.remove": "إزالة صورة السطح المضمّنة",
  "cmd.render_aging_describe": "تقادم السطح بالطبقات",
  "cmd.render_backends": "محركات التصيير",
  "cmd.render_batch": "تصيير كل اللقطات",
@@ -1296,6 +1308,7 @@
  "cmd.timeline_stop": "إيقاف السجل",
  "cmd.timeline_suppress": "تعطيل الميزة",
  "cmd.ui.assistant": "إظهار المساعد أو إخفاؤه",
+  "cmd.view.navigator": "متصفح العرض المخصص",
  "cmd.view.render_browser": "متصفح التصيير",
  "cmd.view.render_dock": "نقل لوحة التصيير",
  "cmd.view.render_focus": "عرض تركيز التصيير",
@@ -1323,6 +1336,7 @@
  "cmd.view_previous_tab": "علامة التبويب السابقة",
  "cmd.view_rename": "إعادة تسمية عرض مسمّى",
  "cmd.view_render_frame": "أدلة إطار التصيير",
+  "cmd.view_ribbon_tabs_only": "علامات تبويب الشريط فقط",
  "cmd.view_right": "العرض الأيمن",
  "cmd.view_save": "عرض مسمّى جديد",
  "cmd.view_shots_strip": "شريط اللقطات",
@@ -1394,15 +1408,22 @@
  "dialog.computing": "جارٍ الحساب… {seconds} ث",
  "dialog.could_not_be_checked": "تعذّر فحصه",
  "dialog.custom_axis": "↖ محور مخصص",
+  "dialog.cylinder_face_tip": "وجه النموذج أو رأسه الذي تقوم عليه الأسطوانة: انقر هنا ثم انقر عليه في العرض. إذا تُرك فارغًا، تحدد X وY وZ موضعها.",
  "dialog.dimension_insert_hint": "انقر على بُعد قائد آخر لإدراج اسمه",
  "dialog.dimension_name": "البُعد: {name}",
+  "dialog.dimension_step_down": "إنقاص بمقدار {step}",
+  "dialog.dimension_step_expression": "يتغير الرقم فقط بالخطوات؛ يبقى التعبير كما كُتب",
+  "dialog.dimension_step_up": "زيادة بمقدار {step}",
  "dialog.edit_title": "تعديل {title}",
  "dialog.no_shown_body": "لا يوجد جسم ظاهر لتغييره: أظهر جسمًا، أو اختر «جسم جديد»",
  "dialog.pattern_sketch_not_object": "اختر أجسامًا أو ميزات: الرسم ليس أيًّا منهما. كرّر منحنياته بأداة النمط أو المرآة داخل الرسم، أو ابثقه أولًا.",
+  "dialog.primitive_point_tip": "نقطة تملأ X وY وZ: انقر هنا ثم على رأس أو حافة أو وجه من النموذج، أو على نقطة من رسم، أو على نقطة الأصل.",
+  "dialog.reference_edge_tip": "حافة مستقيمة من الوجه المختار تُقاس منها المسافة أدناه: انقر هنا ثم على الحافة.",
  "dialog.select": "↖ تحديد",
  "dialog.selected_count": "↖ {count} محدد",
  "dialog.selection_constraint": "قيد {id}",
  "dialog.selection_external_curve": "{sketch} · منحنى {id}",
+  "dialog.selection_external_point": "{point} · {sketch}",
  "dialog.selection_guidance": "حدد مُدخلًا لتغييره. انقر على العناصر المحددة لإزالتها؛ Ctrl/Cmd مع النقر يبدّل تحديدها أيضًا. راجع المعاينة ثم اضغط موافق.",
  "dialog.selection_midpoint": "نقطة المنتصف · {id}",
  "dialog.selection_profile": "{sketch} · مقطع {number}",
@@ -1420,6 +1441,7 @@
  "document.read_only_save": "فُتح هذا التصميم للقراءة فقط: احفظه كملف جديد",
  "document.save_changes": "حفظ التغييرات على {name}؟",
  "document.save_copy": "حفظ نسخة…",
+  "document.tab_unsaved_changes": "تغييرات غير محفوظة",
  "document.unsaved_changes": "في {name} تغييرات غير محفوظة. إن لم تحفظها فستضيع.",
  "drive.rigid": "{joint} مفصل صلب: يثبّت أجزاءه في مكانها، لذا لا يوجد ما يمكن تحريكه. لتتحرك الأجزاء، غيّر نوعه في «تعديل المفصل»: «دوراني» للدوران، «منزلق» للانزلاق، «أسطواني» لكليهما.",
  "drive.stopped_by_contact": "توقف عند {value}: سيخترق {a} الجسم {b}",
@@ -1440,10 +1462,16 @@
  "each rail's curves must be in one sketch": "يجب أن تكون منحنيات كل دليل في رسم واحد",
  "feature computation ended without a result": "انتهى حساب الميزة دون نتيجة",
  "file.open.drawing_filter": "التصاميم وملفات CAD والشبكات والرسومات",
+  "file.open.portal_fallback.no_portal_service": "منتقي الملفات الذي فُتح ليس تابعًا لسطح المكتب: خدمة منتقي الملفات في سطح المكتب غير متاحة.",
+  "file.open.portal_fallback.no_session_bus": "منتقي الملفات الذي فُتح ليس تابعًا لسطح المكتب: لا يوجد ناقل جلسات D-Bus.",
+  "file.open.portal_fallback.xwayland": "منتقي الملفات الذي فُتح ليس تابعًا لسطح المكتب: في XWayland ترفض البوابة النافذة الأصلية.",
  "file_load.built": "بُني حتى الآن: {built} من {total} ميزة.",
  "file_load.converting": "تحويل الجسم الصلب {done} من {total}",
+  "file_load.inserted": "تم إدراج {name}",
  "file_load.inserting": "إدراج الهندسة",
  "file_load.link_item": "{name} ({done} من {total})",
+  "file_load.opened": "تم فتح {name}",
+  "file_load.opened_in_tab": "تم فتح {name} في علامة تبويب جديدة",
  "file_load.opening": "فتح التصميم",
  "file_load.preparing_thumbnail": "تجهيز الصورة المصغّرة...",
  "file_load.preparing_view": "تجهيز العرض...",
@@ -1600,7 +1628,7 @@
  "help.parts.resize": "يغيّر مقاس قطعة قياسية مدرجة أو طولها ويعيد بناءها، وتبقيها مفاصلها مثبتة في مكانها. استخدمه عندما يتبين أن برغيًا أطول من اللازم أو أن ثقبًا يحتاج إلى مقاس آخر.",
  "help.plastic.assign_rule": "يعيّن قاعدة بلاستيك لأجسام، فتأخذ ميزاتها البلاستيكية ميلها وخلوصها منها كقيم افتراضية. استخدمه لإعداد قطعة مقولبة مرة واحدة لكل ميزاتها.",
  "help.plastic.boss": "يضيف نتوءًا لمسمار على وجه: عمودًا مع ثقب اختياري وميل وتقويس عند الجذر وأضلاع تقوية. استخدمه لنقاط البراغي في الهياكل المقولبة أو المطبوعة.",
-  "help.plastic.lip": "يضيف شفة أو أخدودًا مطابقًا على طول حافة جسم مفرَّغ. استخدمه ليتمركز نصفا الهيكل أحدهما على الآخر ويُغلقا بإحكام.",
+  "help.plastic.lip": "يضيف شفة أو أخدودًا مطابقًا على طول إطار جسم مفرَّغ (فرّغ الجسم بفتح أحد وجوهه أولًا، ثم اختر الإطار المحيط بتلك الفتحة). استخدمه ليتمركز نصفا الهيكل أحدهما على الآخر ويُغلقا بإحكام.",
  "help.plastic.manage_rules": "ينشئ قواعد البلاستيك ويعدّلها: المادة وسماكة الجدار وأنصاف الأقطار والخلوص والميل. استخدمها للحفاظ على اتساق ميزات القطعة المقولبة.",
  "help.plastic.rest": "يضيف مسندًا على وجه: وسادة مستديرة أو مستطيلة، مصمتة أو مجوفة، مع ميل. استخدمه كدعامة أو مُباعِد في هيكل مقولب.",
  "help.plastic.snap_fit": "يضيف خطاف وصلة كبس على وجه، بطوله وسماكته ونتوء التثبيت. استخدمه لتثبيت القطع معًا بلا براغي.",
@@ -1679,7 +1707,7 @@
  "help.sketch.insert_svg": "يقرأ مسارات مخطط SVG إلى رسم بالمقياس والدوران والموضع الذي تحدده. استخدمه لتحويل شعار أو محيط متجهي إلى منحنيات يمكنك بثقها.",
  "help.sketch.inspect": "يفتح تقريرًا عن الرسم المفتوح: عدد درجات الحرية المتبقية وهل هو مقيد بالكامل. استخدمه لمعرفة ما لا يزال يتحرك قبل إنهاء الرسم.",
  "help.sketch.intersect": "يضيف المنحنيات أو النقاط التي تقطع فيها أجسام أو أوجه أو حواف أو رسوم أخرى مستوى الرسم. تبقى مرتبطة وتتبع النموذج عندما يتغير.",
-  "help.sketch.intersection_curve": "ينشئ منحنيات ثلاثية الأبعاد حيث يلتقي جسمان أو وجهان، مرتبطة بهما. استخدمها مسارات أو قضبان توجيه تتبع النموذج.",
+  "help.sketch.intersection_curve": "ينشئ منحنيات ثلاثية الأبعاد حيث يلتقي جسمان أو وجهان أو منحنيات رسوم أخرى، مرتبطة بهما. استخدمها مسارات أو قضبان توجيه تتبع النموذج.",
  "help.sketch.isoparametric_curve": "ينشئ منحنى ثلاثي الأبعاد على اتجاه U أو V للوجه عبر نقطة تختارها، مرتبطًا بالوجه. استخدمه مسارًا أو خط تقسيم يتبع السطح.",
  "help.sketch.line": "يرسم خطوطًا متصلة نقطة بنقطة، كسلسلة مفتوحة أو محيط مغلق. هو الأداة الأساسية لمعظم المقاطع.",
  "help.sketch.line.midpoint": "يرسم خطًا من منتصفه إلى أحد طرفيه، ويعكس الطرف الآخر. استخدمه للخطوط المتمركزة على نقطة، مثل حافة متناظرة.",
@@ -1785,6 +1813,7 @@
  "help.view.navigate": "يدير العرض أو يُزيحه أو يغيّر تكبيره بخطوات، مثل ربع دورة إلى اليسار. استخدمه لتحريك الكاميرا بدقة بدلًا من السحب.",
  "help.view.navigation_bar": "يُظهر شريط التنقل أسفل منطقة العرض أو يخفيه. أخفِه لمساحة أكبر، وأظهره للوصول إلى أدوات العرض بالفأرة.",
  "help.view.rename": "يمنح عرضًا مسمّى محفوظًا اسمًا جديدًا. يبقى العرض نفسه كما هو.",
+  "help.view.ribbon_tabs_only": "يطوي الشريط إلى صف علامات التبويب، فتحصل منطقة العرض على المساحة التي كانت تشغلها لوحاته. انقر علامة تبويب لإظهار لوحاتها فوق منطقة العرض؛ واختر هذا الأمر مرة أخرى لإبقاء الشريط كاملًا ظاهرًا.",
  "help.view.save": "يحفظ موضع الكاميرا الحالي كعرض مسمّى في التصميم. استخدمه للعودة إلى الزاوية نفسها لاحقًا، مثلًا للقطات الشاشة.",
  "help.view.spin": "يدوّر العرض حول النموذج باستمرار حتى النقرة أو المفتاح التالي. استخدمه لعرض النموذج من جميع الجهات.",
  "help.view.tool": "يثبّت أداة كاميرا، التدوير أو الإزاحة أو التكبير، بحيث يحرّك السحب بزر الفأرة الأيسر العرض حتى توقفها. استخدمه على لوحة اللمس أو بدون زر فأرة أوسط.",
@@ -1918,7 +1947,7 @@
  "joint.limit_loop": "{side} {value}: لا يمكن لحلقة مغلقة أن تنغلق بعده",
  "joint.limit_range": "{side}: لا تلامس ضمن {range}، تُرك كما كان",
  "joint.limit_turn": "{side} {value}: لا تلامس ضمن دورة واحدة",
-  "joint.limits_overlapping": "متداخلة بالفعل هنا: {pairs}. لا توقف البحث إلا إذا تداخلت أعمق.",
+  "joint.limits_overlapping": "متداخلة بالفعل هنا: {pairs}. لا توقف البحث إلا إذا ازداد تداخلها.",
  "joint.one_body": "كلا الاختيارين على {body}. اختر الثاني على قطعة أخرى.",
  "joint.one_component": "هذه القطع أجسام لمكوّن واحد: {bodies}. المفصل يحرّك مكوّنًا مقابل آخر، لذا تحتاج كل قطعة إلى مكوّن خاص بها.",
  "joint.rigid_group_one_component": "هذه الأجسام وعددها {count} كلها في مكوّن واحد (أو في التصميم نفسه): استخدم {command} أولًا.",
@@ -1933,7 +1962,7 @@
  "joint_move.fine": "الخطوة بعيدًا عن المحور",
  "joint_move.fixed": "لا يملك هذا الجزء محور مفصل قابلًا للحركة.",
  "joint_move.help": "تحريك — اسحب سهمًا أو قوسًا. يلغى السحب الحالي بمفتاح Esc.",
-  "joint_move.legacy_hint": "إيقاف: لوحة التحريك السابقة.",
+  "joint_move.legacy_hint": "عند الإيقاف: لوحة التحريك السابقة.",
  "joint_move.precision": "اسحب خارج الدليل المتقطع للخطوة الدقيقة.",
  "joint_move.rotation": "الدوران من نقطة البداية",
  "joint_move.select": "اختر وجهًا أو جزءًا واحدًا من التجميع، ثم اختر تحريك.",
@@ -1999,6 +2028,7 @@
  "material.selection.mixed": "مواد مختلفة",
  "measure.at": "عند",
  "measure.item": "العنصر {number}",
+  "measure.line_to_centre": "من الخط إلى المركز",
  "measure.quick_copied": "تم نسخ القياس",
  "measure.quick_copy": "انقر لنسخ القياس",
  "measure.quick_edges": "{count} حواف",
@@ -2029,6 +2059,8 @@
  "nav.blender.help": "السحب بالزر الأوسط يدوّر العرض، وShift مع الأوسط يُزيحه، وCtrl مع الأوسط يكبّره؛ والسحب بالأيمن لا يحرك الكاميرا",
  "nav.creo.help": "السحب بالزر الأوسط يدوّر العرض، وShift مع الأوسط يُزيحه، وCtrl مع السحب العمودي بالأوسط يكبّره أو يصغّره (السحب لأسفل للتكبير)؛ وتدوير العجلة يكبّره أو يصغّره",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "يستمر السحب بالزر الأوسط أو الأيمن في التدوير أو التحريك أو التكبير كما بدأ حتى تحرير الزر، مهما ضُغطت المفاتيح أو حُرّرت في أثناء ذلك. عند الإيقاف: تقرر المفاتيح المضغوطة في كل لحظة من السحب.",
+  "nav.drag_keeps_mode.label": "يحتفظ السحب بطريقة التنقل التي بدأ بها",
  "nav.free_orbit.help": "الفأرة والفأرة ثلاثية الأبعاد تدوّران العرض عبر القطبين وتحافظان على اللف. يُعطَّل التقاط المحاور بـ Shift.",
  "nav.free_orbit.label": "تدوير حر",
  "nav.free_orbit.snap_help": "الفأرة والفأرة ثلاثية الأبعاد تدوّران العرض عبر القطبين وتحافظان على اللف. اضغط مطولًا على Shift أثناء سحب التدوير لالتقاط اتجاه العرض واللف.",
@@ -2240,7 +2272,7 @@
  "prefs.anti_aliasing_amd_dx12": "يستخدم تنعيم الحواف 1× لأن فحص بدء التشغيل لم يرسم شيئًا مع أخذ العينات المتعددة ونجح عند 1×. يمكنك اختيار إعداد آخر أعلاه؛ أعد التشغيل لتطبيقه إن نجح الفحص.",
  "prefs.anti_aliasing_note": "ينعّم الحواف المسننة.",
  "prefs.appearance.colour_vision_help": "يغيّر الألوان ذات الدلالة: حالات الرسم والمحاور والثنيات والتحليلات والأيقونات.",
-  "prefs.appearance.desktop_only": "لسطح المكتب فقط",
+  "prefs.appearance.desktop_only": "لتطبيق سطح المكتب فقط",
  "prefs.appearance.follow_help": "يعيد التحميل عندما تعيد أداة أخرى كتابة الملف.",
  "prefs.appearance.interface_scale": "مقياس الواجهة",
  "prefs.appearance.next_themes": "السمات التالية",
@@ -2250,11 +2282,11 @@
  "prefs.appearance.theme_count": "{count} سمات",
  "prefs.appearance.theme_own": "ألوان السمة",
  "prefs.appearance.viewport_colours": "ألوان العرض ثلاثي الأبعاد",
-  "prefs.appearance.viewport_logo": "منفذ العرض والشعار",
+  "prefs.appearance.viewport_logo": "منطقة العرض والشعار",
  "prefs.applies_on_restart": "يُطبَّق عند إعادة التشغيل",
  "prefs.assistant": "المساعد",
  "prefs.assistant_connecting": "الاتصال",
-  "prefs.assistant_follow_help": "تحرّك عروض Look At للرسم المنظور مع المؤشر.",
+  "prefs.assistant_follow_help": "النظر إلى الرسومات يحرّك العرض مع المؤشر.",
  "prefs.assistant_limit": "الحد",
  "prefs.assistant_limited": "محدود",
  "prefs.assistant_pointer_speed": "سرعة المؤشر",
@@ -2262,13 +2294,24 @@
  "prefs.assistant_seconds_aria": "الثواني",
  "prefs.assistant_use_care": "استخدم بحذر",
  "prefs.auto_operation": "اختيار العملية تلقائيًا",
-  "prefs.auto_operation_note": "ضم أو جسم جديد أو قطع، حسب ما تلامسه المادة.",
+  "prefs.auto_operation_note": "ضم أو جسم جديد أو قص، حسب ما تلامسه المادة.",
  "prefs.axes": "المحاور",
  "prefs.axis": "المحور",
+  "prefs.background_choose": "اختيار صورة…",
+  "prefs.background_image": "الصورة",
+  "prefs.background_unreadable": "تعذرت قراءة صورة الخلفية",
+  "prefs.blur_cost": "تكلفة العرض النسبية. زيادة الأشرطة تعني عادةً مزيدًا من العمل.",
+  "prefs.blur_device": "غير متاح على جهاز الرسوميات أو مسار العرض هذا",
+  "prefs.blur_guard": "خُفّضت جودة التمويه للحفاظ على استجابة الإطارات. لم يتغير نصف القطر.",
+  "prefs.blur_off": "إيقاف",
+  "prefs.blur_reduce_transparency": "معطّل بسبب إعداد تقليل الشفافية في النظام",
+  "prefs.blur_software": "غير متاح مع الرسوميات البرمجية (gpu-software)",
+  "prefs.blur_source": "غير متاح في عرض مساحة العمل هذا",
+  "prefs.blur_web": "غير متاح في مسار عرض الويب هذا",
  "prefs.bodies_folders": "مجلدات الأجسام",
  "prefs.bodies_folders_always": "دائمًا",
  "prefs.bodies_folders_never": "أبدًا",
-  "prefs.bodies_folders_several": "عدة",
+  "prefs.bodies_folders_several": "عند التعدد",
  "prefs.bottom": "أسفل",
  "prefs.bottom_centre": "أسفل الوسط",
  "prefs.bottom_right": "أسفل اليمين",
@@ -2278,6 +2321,8 @@
  "prefs.browser_eye_left": "أيقونة الإظهار بجانب سهم الطي",
  "prefs.browser_eye_left_note": "تعرض صفوف المستعرض أيقونة الإظهار/الإخفاء بجانب سهم الطي كما كانت من قبل، بدلًا من عمود عند نهاية الصفوف.",
  "prefs.browser_reveal_on_hover": "إظهار عند مرور المؤشر",
+  "prefs.browser_rows_start_closed": "صفوف المستعرض تبدأ مغلقة",
+  "prefs.browser_rows_start_closed_note": "تبدأ المواضع والمجلدات في المستعرض مغلقة، فيعرض التصميم الذي يضم مكونات كثيرة صفوفه العليا. يُفتح كل صف بسهمه أو بـ«توسيع الكل» أو بـ«البحث في المستعرض» الذي يفتح الصفوف المؤدية إلى الجسم فقط، ويغلق من جديد الصفوف التي فتحها البحث السابق. اختيار جسم في العرض ثلاثي الأبعاد يترك المستعرض كما هو. عند إيقافه تبدأ المجلدات مفتوحة، وتبدأ المواضع كما يحدّد خيار «المكوّنات مفتوحة من البداية»، ويفتح الاختيار في العرض ثلاثي الأبعاد المستعرضَ حتى صف الجسم، كما كان من قبل.",
  "prefs.browser_show_note": "«ظاهر» يُبقي المستعرض على الشاشة. «إظهار عند مرور المؤشر» يُخفيه حتى يمر المؤشر فوق مكانه أو فوق الشريط الرفيع عند حافته اليسرى، ويبقى مفتوحًا ما دام المؤشر داخله أو كانت قائمة منه مفتوحة.",
  "prefs.browser_shown": "ظاهر",
  "prefs.built_in": "مدمج",
@@ -2288,6 +2333,7 @@
  "prefs.carousel_previous": "السابق",
  "prefs.choose_font": "اختيار ملف خط…",
  "prefs.click": "نقر",
+  "prefs.command_dialog_values": "مربعات حوار الأوامر",
  "prefs.contact_shading": "تظليل التلامس الناعم",
  "prefs.contact_shading_note": "تظليل ناعم حيث تقترب القطع من بعضها.",
  "prefs.context_menu": "القائمة السياقية",
@@ -2323,6 +2369,13 @@
  "prefs.dialogs_edge": "عند حافة العرض",
  "prefs.dialogs_left_column": "في العمود الأيسر",
  "prefs.dialogs_note": "مكان فتح حوارات الأوامر: مثبتة عند حافة العرض، أو في العمود الأيسر مكان المستعرض والسجل، اللذين يعودان كما كانا عند إغلاق الحوار.",
+  "prefs.dimension_step_angle": "ما تضيفه أسهم النافذة والسهمان لأعلى ولأسفل والعجلة إلى الزاوية",
+  "prefs.dimension_step_length": "ما تضيفه أسهم النافذة والسهمان لأعلى ولأسفل والعجلة إلى الطول",
+  "prefs.dimension_steps": "خطوات النافذة",
+  "prefs.dimension_values": "قيم الأبعاد",
+  "prefs.dimension_values_note": "مكان كتابة قيمة البعد. للنافذة أسهم تغيّرها بخطوات؛ تضع أداة البعد النص أولًا.",
+  "prefs.dimension_values_view": "في العرض",
+  "prefs.dimension_values_window": "في نافذة",
  "prefs.display": "العرض",
  "prefs.edges": "الحواف والتظليل",
  "prefs.extend": "توسيع",
@@ -2360,7 +2413,7 @@
  "prefs.graphics_note": "وازن بين السرعة والنعومة. كل خيار يعرض أثره على عيّنة.",
  "prefs.graphics_page.current_view": "العرض الحالي",
  "prefs.graphics_page.fastest": "الأسرع",
-  "prefs.graphics_page.fold_items": "طي العناصر",
+  "prefs.graphics_page.fold_items": "تلخيص العناصر",
  "prefs.graphics_page.in_view": "داخل العرض",
  "prefs.graphics_page.live_details": "تفاصيل مباشرة",
  "prefs.graphics_page.own_mix": "مزيجك الخاص",
@@ -2369,13 +2422,15 @@
  "prefs.graphics_page.restart": "تلزم إعادة التشغيل",
  "prefs.graphics_page.sharpest": "الأكثر وضوحًا",
  "prefs.graphics_page.single_surface_analysis": "تحليل سطح واحد",
-  "prefs.graphics_page.status_chips": "شرائح الحالة",
+  "prefs.graphics_page.status_chips": "شارات الحالة",
  "prefs.graphics_page.subtitle": "وازن بين السرعة والنعومة.",
  "prefs.graphics_page.supersampling": "التنعيم الفائق",
  "prefs.graphics_page.supersampling_adaptive": "فقط أثناء سكون العرض",
  "prefs.graphics_page.surfaces_edges": "الأسطح والحواف",
  "prefs.graphics_page.view_bar": "أيضًا في شريط العرض",
  "prefs.graphics_presets_note": "الإعدادات المسبقة تضبط الخيارات أدناه معًا.",
+  "prefs.ground_shadow_follows_model": "ظل الأرض يتبع النموذج",
+  "prefs.ground_shadow_follows_model_help": "ضع الظل أسفل أدنى جسم مرئي. عند التعطيل، يبقى ظل النماذج المرفوعة على مستوى الأرض عند نقطة الأصل.",
  "prefs.hide_constraint_glyphs_zoomed_out": "إخفاء رموز القيود عند التصغير",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "تختفي رموز القيود من العرض عندما يُصغَّر الرسم بقدر يجعلها تزحمه. معطّل: تبقى بحجم ثابت على الشاشة عند أي مستوى تكبير.",
  "prefs.history": "السجل",
@@ -2402,6 +2457,10 @@
  "prefs.invert_curved_roll_arrows_note": "سهما التدوير المنحنيان عند زاوية المكعب يدوران العرض داخل مستوى الشاشة. عند التشغيل: سهم التدوير مع عقارب الساعة يدور عكسها، وسهم العكس يدور معها. عند الإيقاف: يدور كل سهم بالعرض حسب انحنائه.",
  "prefs.invert_navigator_arrows": "عكس أسهم تدوير مكعب العرض",
  "prefs.invert_navigator_arrows_note": "تدوّر الأسهم المحيطة بالمكعب الكاميرا في الاتجاه الذي تشير إليه، كما في Fusion وInventor: السهم الموجود على اليسار يشير إلى اليمين ويدوّر الكاميرا إلى اليمين. عند الإيقاف: يدوّر السهم المكعب نحو الجهة التي يقع فيها، فيدوّر السهم الأيسر الكاميرا إلى اليسار. لا يتأثر سهما الدوران المنحنيان.",
+  "prefs.keep_unsaved_also_asks": "السؤال أيضًا عند إغلاق علامة التبويب",
+  "prefs.keep_unsaved_also_asks_tip": "عند إيقاف هذا الخيار، تُغلق علامة التبويب دون مربع المتصفح بعد تحديث نسخة كل تصميم غير محفوظ.",
+  "prefs.keep_unsaved_in_browser": "الاحتفاظ بالعمل غير المحفوظ في هذا المتصفح",
+  "prefs.keep_unsaved_in_browser_tip": "تُحدَّث التغييرات غير المحفوظة لكل تصميم مفتوح باستمرار في التخزين الخاص بهذا المتصفح. وتعرض الزيارة التالية استعادتها.",
  "prefs.keep_work_on_tab_switch": "إبقاء مربعات الحوار والأدوات مفتوحة عند التبديل بين التصاميم",
  "prefs.keep_work_on_tab_switch_note": "تحتفظ كل علامة تبويب تصميم بمربع الحوار أو الأداة المفتوحة، بما حددته وكتبته فيها، وبعلامة تبويب شريط الأدوات. وتجدها كما هي عند العودة إلى التصميم. عند الإيقاف: يؤدي التبديل بين التصاميم إلى إلغائها وعرض علامة التبويب «النموذج».",
  "prefs.labels": "التسميات",
@@ -2413,10 +2472,12 @@
  "prefs.layout_page.card": "بطاقة",
  "prefs.layout_page.column": "عمود",
  "prefs.layout_page.hover": "عند مرور المؤشر",
+  "prefs.layout_page.hover_panel_menus": "تبديل قوائم اللوحات عند مرور المؤشر",
+  "prefs.layout_page.hover_panel_menus_help": "انقر على اسم لوحة في الشريط لفتح قائمتها. مرّر المؤشر فوق اسم لوحة أخرى للتبديل. حرّك المؤشر خارج الشريط والقائمة المفتوحة لإغلاقها.",
  "prefs.layout_page.icons_labels": "الأيقونات + التسميات",
  "prefs.layout_page.ok_cancel": "موافق وإلغاء",
  "prefs.layout_page.on_hover": "عند مرور المؤشر",
-  "prefs.layout_page.open": "فتح",
+  "prefs.layout_page.open": "تُفتح",
  "prefs.layout_page.origin_bodies": "الأصل والأجسام في الأعلى",
  "prefs.layout_page.panels": "اللوحات",
  "prefs.layout_page.pinned_menus": "استبعاد الأوامر المثبتة من القوائم",
@@ -2456,8 +2517,8 @@
  "prefs.navigation.cube_compact": "المكعب",
  "prefs.navigation.device": "الجهاز",
  "prefs.navigation.free": "حر",
-  "prefs.navigation.orbit_style": "نمط الدوران",
-  "prefs.navigation.radial_help": "اضغط مطولاً أو انقر سريعاً بالزر الأيمن لعرض حلقة من الأدوات.",
+  "prefs.navigation.orbit_style": "نمط التدوير",
+  "prefs.navigation.radial_help": "اضغط مطولًا أو انقر سريعًا بالزر الأيمن لعرض حلقة من الأدوات.",
  "prefs.navigation.turntable": "طاولة دوارة",
  "prefs.navigation_note": "كيف تحرك الفأرة ولوحة اللمس والفأرة ثلاثية الأبعاد العرض.",
  "prefs.navigator_fit": "ملاءمة النموذج بعد تغيير العرض من متصفح العرض",
@@ -2475,7 +2536,7 @@
  "prefs.origin_plane_names_note": "الأسماء المعروضة في المستعرض والحوارات والقوائم. {top} هو XY و{front} هو XZ و{right} هو YZ، والمحور Z للأعلى. تحتفظ الأوامر والسكربتات والتصاميم المحفوظة بـ XY وXZ وYZ.",
  "prefs.overall_speed": "السرعة العامة",
  "prefs.parameter_list_rows": "صفوف قائمة المعاملات",
-  "prefs.parameter_list_rows_tip": "الحد الأقصى للمعلمات التي يسردها السهم لأسفل في مربع تعبير فارغ.",
+  "prefs.parameter_list_rows_tip": "الحد الأقصى للمعاملات التي يسردها السهم لأسفل في مربع تعبير فارغ.",
  "prefs.persistent_ribbon_pressed": "تمييز أوامر الشريط النشطة",
  "prefs.persistent_ribbon_pressed_help": "تمييز أوامر الشريط أثناء تفعيل تأثيراتها. أوقف هذا الخيار للاحتفاظ بالمظهر المحايد السابق ومساعدة الأوامر.",
  "prefs.perspective_fov": "مجال الرؤية",
@@ -2515,6 +2576,8 @@
  "prefs.quality_smoother": "أنعم",
  "prefs.quick_measure": "قياس سريع في زاوية العرض",
  "prefs.quick_measure_note": "مقاس العناصر المحددة في الزاوية اليمنى السفلية من العرض: طول الحافة (أو Ø وR للحافة الدائرية)، ومساحة الوجه، وموضع النقطة، والمسافة والزاوية بين عنصرين، ومجموع عدة حواف أو أوجه. النقر ينسخه.",
+  "prefs.remember_dialog_values": "تذكّر قيم مربعات حوار الأوامر",
+  "prefs.remember_dialog_values.help": "معطّل افتراضيًا. عند تفعيله، بعد نجاح الأمر، يُعاد استخدام قيمه وخياراته الآمنة في المرة التالية التي تفتح فيها الأمر نفسه، حتى إغلاق SolidCraft.",
  "prefs.render_previous_geometry_budget": "استخدام ميزانية الهندسة السابقة لمعاينة التصيير",
  "prefs.render_previous_geometry_budget_help": "استعادة حد الهندسة الثابت السابق (512 ميبيبايت على سطح المكتب 64 بت، و128 ميبيبايت على المنصات الأخرى) بدلًا من الميزانية المعتمدة على الجهاز.",
  "prefs.reports_saved": "{n} محفوظة",
@@ -2523,6 +2586,8 @@
  "prefs.ribbon_click_ends_tool_note": "النقر على زر الشريط المضيء لأداة الرسم المستخدمة ينهي الأداة، فيعود النقر في العرض إلى التحديد. عند الإيقاف: يبدأ النقر الأداة من جديد.",
  "prefs.ribbon_reveal": "إظهار مكان نتائج البحث في الشريط",
  "prefs.ribbon_reveal_note": "عند تمرير المؤشر فوق نتيجة في «البحث في الأوامر» يظهر مكان الأمر في الشريط: تبويبه أو زره أو صفه في القائمة المنسدلة للوحة. ويومض هناك الأمر الذي بدأ من البحث، ويُعلِّم الأمر الجاري من قائمة منسدلة لوحتَه.",
+  "prefs.ribbon_tabs_only": "إظهار علامات تبويب الشريط فقط",
+  "prefs.ribbon_tabs_only_note": "يُطوى الشريط إلى صف علامات التبويب. يؤدي النقر على علامة تبويب إلى إظهار لوحاتها فوق منطقة العرض حتى يبدأ أمر أو يغادرها المؤشر. يبدّل الأمر «علامات تبويب الشريط فقط» في تبويب العرض، أو اختصاره، هذا الخيار.",
  "prefs.right_click": "نقر أيمن",
  "prefs.saving": "البدء والحفظ",
  "prefs.scale_note": "أو Ctrl + / Ctrl − في النافذة. الأزرار 28 px عند 100%.",
@@ -2533,6 +2598,8 @@
  "prefs.section_hatch_by_part": "حسب الجزء",
  "prefs.section_hatch_one": "نمط واحد",
  "prefs.select": "تحديد",
+  "prefs.select_hidden_edges": "تحديد الحواف المخفية في نمط «مظلل مع الحواف المخفية»",
+  "prefs.select_hidden_edges_help": "يتيح تحديد الحواف عبر الأوجه عند تفعيل نمط «مظلل مع الحواف المخفية»، بما في ذلك عند استخدام التقويس. عند الإيقاف يبقى سلوك التحديد كما في v0.30.1. تظل الأجسام المخفية غير قابلة للتحديد.",
  "prefs.select_one_item": "تحديد عنصر واحد",
  "prefs.select_other_hidden": "تحديد العناصر الهندسية المخفية باستخدام «تحديد عنصر آخر»",
  "prefs.select_other_hidden_help": "عند التفعيل: تضمين الأجسام والمخططات المخفية والحواف المحجوبة قرب المؤشر. عند التعطيل: استخدام القائمة الأصلية للعناصر الهندسية المرئية أسفل المؤشر.",
@@ -2544,19 +2611,21 @@
  "prefs.shortcuts_import": "استيراد",
  "prefs.shortcuts_intro": "مفاتيح كل أمر.",
  "prefs.shortcuts_not_assigned": "غير معيّن",
-  "prefs.shortcuts_press": "اضغط مفتاحاً...",
+  "prefs.shortcuts_press": "اضغط مفتاحًا...",
  "prefs.single_surface_analysis": "استخدام تحليل سطح واحد",
  "prefs.single_surface_analysis_help": "عند إيقاف هذا الخيار، يمكن إبقاء تظليل السطح وتحليل الاستمرارية مفعّلين معًا. عند تشغيله، يبقى آخر تحليل تم بدؤه أو تغييره فقط.",
  "prefs.sketch.align_points": "المحاذاة مع نقاط الرسم الأخرى",
  "prefs.sketch.align_points_note": "تتحاذى الخطوط أثناء الرسم مع النقاط على المحورين معًا.",
  "prefs.sketch.auto_dimensions": "إضافة كل الأبعاد للأشكال الجديدة",
  "prefs.sketch.auto_dimensions_note": "القيم المدخلة وكل بُعد يثبّت الشكل.",
-  "prefs.sketch.auto_locate": "التحديد انطلاقًا من أصل الرسم",
+  "prefs.sketch.auto_locate": "تحديد الموضع من أصل الرسم",
  "prefs.sketch.auto_locate_note": "مع إضافة كل الأبعاد.",
-  "prefs.sketch.center_arc": "قوس المركز يتبع المؤشر",
+  "prefs.sketch.center_arc": "القوس بنقطة مركز يتبع المؤشر",
  "prefs.sketch.click_selects": "النقر يحدد",
  "prefs.sketch.conflict_colour": "لون التعارض",
  "prefs.sketch.drawing": "الرسم",
+  "prefs.sketch.ellipse_axes": "رسم القطوع الناقصة مع محاورها",
+  "prefs.sketch.ellipse_axes_note": "المحوران الأكبر والأصغر كخطوط مساعدة، لتحديد أبعاد أنصاف المحاور والمحاور. عند الإيقاف: القطع الناقص وحده، ويعطي D عليه نصف قطره الأصغر أينما سُحبت القيمة، مرسومًا ومُعلَّمًا بـ R كما في السابق.",
  "prefs.sketch.exit_keep": "إبقاء",
  "prefs.sketch.exit_previous": "العودة إلى العرض السابق",
  "prefs.sketch.exit_unless_rotated": "إلا إذا تم التدوير",
@@ -2568,7 +2637,7 @@
  "prefs.sketch.prefer_free_points": "تفضيل النقاط القابلة للتحريك عند تداخلها",
  "prefs.sketch.project_options": "السؤال عن خيارات الإسقاط أولًا",
  "prefs.sketch.recent_snap": "الالتقاط عند تقاطع دليلين",
-  "prefs.sketch.select_other_hidden": "اختيار آخر يشمل الهندسة المخفية",
+  "prefs.sketch.select_other_hidden": "تحديد آخر يشمل الهندسة المخفية",
  "prefs.sketch.shortcut_cycles_modes": "الاختصار مجددًا يبدّل الوضع",
  "prefs.sketch.shortcut_cycles_modes_tip": "عند الإيقاف: تبدأ الأداة مجددًا.",
  "prefs.sketch.snapping_guides": "الالتقاط والأدلة",
@@ -2650,6 +2719,10 @@
  "prefs.theme_follow_off": "إيقاف",
  "prefs.theme_follow_stop": "إيقاف الاتباع",
  "prefs.theme_import_hint": "انقر لاختيار ملف سمة، أو أفلت ملفًا هنا، أو اضغط Ctrl+V (Cmd+V على Mac) بعد نسخ سمة",
+  "prefs.theme_notice_dismiss": "إخفاء",
+  "prefs.theme_option_blur": "تمويه خلف اللوحات",
+  "prefs.theme_option_blur_help": "تمويه خلف اللوحات شبه الشفافة، بالبكسل الفعلي. الصفر يوقف التمويه.",
+  "prefs.theme_option_invalid": "القيمة المحفوظة للخيار {option} غير صالحة؛ تُستخدم القيمة الافتراضية للسمة. تبقى القيمة المحفوظة كما هي.",
  "prefs.theme_option_opacity": "العتامة",
  "prefs.theme_option_opacity_help": "اضبط عتامة اللوحات العائمة. يُطبّق حد أدنى للعتامة للحفاظ على وضوح النص فوق ألوان منطقة العرض.",
  "prefs.theme_option_tab_colours": "ألوان علامات التبويب",
@@ -2658,6 +2731,7 @@
  "prefs.theme_option_tab_fade_ms_help": "تتغيّر ألوان اللوحات ومنطقة العرض تدريجيًا عند تبديل علامات التبويب. القيمة صفر تبدّلها فورًا.",
  "prefs.theme_options_badge": "الخيارات",
  "prefs.theme_options_more": "المزيد · {count}",
+  "prefs.theme_options_newer": "تتطلب هذه السمة إصدارًا أحدث من SolidCraft. بعد الترقية، أعد استيراد السمة الأصلية لاستعادة تعريفات خياراتها.",
  "prefs.theme_options_reset": "إعادة تعيين",
  "prefs.theme_options_unavailable": "غير متاح على هذا الجهاز",
  "prefs.theme_paste": "لصق السمة",
@@ -2686,7 +2760,7 @@
  "prefs.validation.each_step": "بعد كل خطوة",
  "prefs.validation.label": "فحص النواة الكامل",
  "prefs.validation.off": "متوقف (تجريبي)",
-  "prefs.validation_note": "بعد كل خطوة: يفحص كل عملية سحب ودمج وتقويس.\nمرة لكل ميزة: يفحص ناتج كل ميزة مرة واحدة.\nمتوقف (تجريبي): لا فحص.",
+  "prefs.validation_note": "بعد كل خطوة: يفحص كل عملية كنس وعملية منطقية وتقويس.\nمرة لكل ميزة: يفحص ناتج كل ميزة مرة واحدة.\nمتوقف (تجريبي): لا فحص.",
  "prefs.value_boxes_in_view": "إظهار القيم بجانب مقابضها",
  "prefs.value_boxes_in_view_tip": "مسافة البثق ونصف قطر التدوير... في مربع داخل العرض.",
  "prefs.view": "سلوك العرض",
@@ -2721,6 +2795,12 @@
  "recovery.just_now": "الآن",
  "recovery.min_ago": "قبل {count} دقيقة",
  "recovery.never_saved": "لم يُحفظ قط",
+  "recovery.open_saved": "فتح النسخة المحفوظة",
+  "recovery.restore": "استعادة",
+  "recovery.restore_intro": "التغييرات التي لم تُحفظ عند آخر إغلاق لهذه الصفحة محفوظة في هذا المتصفح.",
+  "recovery.restore_row": "{name}، تغيّر {when}",
+  "recovery.restore_title": "استعادة التصاميم غير المحفوظة؟",
+  "recovery.restore_title_one": "استعادة التصميم غير المحفوظ: {name}، تغيّر {when}؟",
  "refused.change": "تعذّر تغيير {body}.",
  "refused.cut": "تعذّر قطع {body}.",
  "refused.face_curved": "أحد أوجهه المنحنية لا يمكن استخدامه في النمذجة.",
@@ -3242,9 +3322,11 @@
  "render.frame_wide": "16:9 · عريض",
  "render.gpu_depth": "أقصى عمق للمسار",
  "render.gpu_options_help": "تُحفظ العيّنات والعمق والبذرة والتعريض مع هذا الإعداد. تُحفظ طريقة الصورة النشطة فقط.",
+  "render.gpu_path_crashed": "أُغلق SolidCraft أثناء إعداده على محوّل الرسوميات هذا في المرة السابقة، على الأرجح داخل برنامج تشغيل الرسوميات، لذا لن يُعاد إعداده تلقائيًا. استخدم تتبع الأشعة على المعالج المركزي بدلًا منه، أو حاول مرة أخرى (يعيد تحديث برنامج التشغيل المحاولة أيضًا).",
  "render.gpu_path_failed": "متتبع المسارات على GPU غير متاح",
  "render.gpu_path_first_setup": "قد يستغرق الإعداد الأول على وحدة GPU هذه عدة دقائق؛ ويبقى SolidCraft قابلًا للاستخدام أثناءها. تعيد المرات اللاحقة استخدام المظللات المترجمة حيث يحتفظ بها برنامج التشغيل.",
  "render.gpu_path_preparing": "متتبع المسارات على GPU: ترجمة المظللات…",
+  "render.gpu_path_retry": "حاول مرة أخرى",
  "render.gpu_seed": "البذرة العشوائية",
  "render.gpu_unavailable": "تتبع المسارات على GPU غير جاهز على هذا الجهاز.",
  "render.ground_apply": "ملاءمة الأرضية وحفظها",
@@ -3858,6 +3940,7 @@
  "render.stage_panels.extent": "الامتداد",
  "render.stage_panels.fit_save": "ملاءمة وحفظ",
  "render.stage_panels.gpu_required": "يتطلب تتبّع المسار على GPU",
+  "render.stage_panels.grain_angle": "زاوية عروق الخشب",
  "render.stage_panels.keep": "احتفاظ",
  "render.stage_panels.kept": "ما يُحتفظ به",
  "render.stage_panels.kept_fields": "الكاميرا، وأخذ العيّنات، والأبعاد، والروابط البصرية، وهندسة CAD، والخصائص الهندسية.",
@@ -3976,6 +4059,19 @@
  "render.subsurface_enable": "مسار عشوائي للتشتت الداخلي",
  "render.subsurface_help": "للعوازل المغلقة فقط. التشتت وامتصاص RGB معاملان منفصلان لكل mm. تتشتت المسارات داخل الهندسة الفعلية، ثم تنكسر أو تنعكس عند الحد. عطّل نفاذ الظل المستقيم وإزالة تشويش السطح والحجم الخارجي؛ واستخدم طبقة فرينل واحدة. ليس مظلل انتشار ولا شبكة كثافة ولا مادة مقيسة. الأوساط الكثيفة قد تحتاج مزيدًا من العيّنات وعمق المسار.",
  "render.subsurface_rate": "معدل اصطدامات التشتت",
+  "render.surface_import.author": "المؤلف",
+  "render.surface_import.busy": "جارٍ استيراد الصورة…",
+  "render.surface_import.complete": "اختر صورة وأدخل مؤلفها ومصدرها وترخيصها.",
+  "render.surface_import.embedded": "صورة مستوردة",
+  "render.surface_import.failed": "لم يكتمل استيراد الصورة.",
+  "render.surface_import.license": "الترخيص / الملكية",
+  "render.surface_import.raytrace_required": "تتطلب الصور تتبع الأشعة على CPU أو GPU. اختره في الإخراج.",
+  "render.surface_import.repeat_u": "تكرار U",
+  "render.surface_import.repeat_v": "تكرار V",
+  "render.surface_import.save": "حفظ الصورة على الجسم",
+  "render.surface_import.saved_cpu": "احفظ الخرائط لاستخدامها في التصيير على CPU.",
+  "render.surface_import.source": "المصدر",
+  "render.surface_import.title": "استيراد صورة",
  "render.tone_aces_fitted": "ACES مُلاءَم",
  "render.tone_reinhard": "راينهارد",
  "render.transmission_scope": "يدعم زجاج GPU الأوساط المنفصلة المعتمدة. لا تتوفر الأوساط المتداخلة غير المقيدة ولا مقدّر نفاذ خالٍ من التشويش.",
@@ -4052,6 +4148,8 @@
  "sample.plate.name": "لوح نموذجي",
  "sample.vents.about": "شقوق في نمط مستطيلي: الصفوف والأعمدة والخطوة معاملات",
  "sample.vents.name": "لوح تهوية",
+  "scale.per_axis": "لكل محور",
+  "scale.uniform": "موحّد",
  "search.command_keys": "Enter تشغيل     Shift+Enter تشغيل مع الإبقاء مفتوحًا     Esc إغلاق",
  "search.commands": "الأوامر",
  "search.design": "في هذا التصميم",
@@ -4091,7 +4189,7 @@
  "settings.display_quality_note": "المستويات الأدق ترسم الأوجه والحواف المنحنية بنعومة أكبر وتستغرق وقتًا أطول لإنشاء الشبكة. يتغير العرض فقط، لا التصميم ولا الملفات المصدّرة.",
  "settings.double_click_components": "النقر المزدوج على مكوّن لتنشيطه",
  "settings.frame_rate_details_note": "يضيف رسمًا لأزمنة الإطارات الأخيرة مع المثلثات المرسومة فوقه، ومدرّجًا تكراريًا لأزمنة الإطارات، وما رسمته وحدة GPU. انقر معدل الإطارات في العرض لإظهارها أو إخفائها.",
-  "settings.frame_rate_note": "يعرض الإطارات في الثانية في الزاوية اليمنى السفلية من العرض. أثناء تفعيله يُعاد رسم العرض باستمرار.",
+  "settings.frame_rate_note": "يعرض الإطارات في الثانية في الزاوية اليمنى السفلية من العرض.",
  "settings.insert_lists_open_designs": "إدراج تصميم يسرد التصاميم المفتوحة أولًا",
  "settings.measure_axis_distances": "مسافات المحاور في القياس",
  "settings.measure_axis_distances_help": "إظهار مركّبات الأبعاد على محاور العالم بجانب المسافة الكلية أثناء فتح أداة القياس.",
@@ -4142,6 +4240,32 @@
  "sketch.dof_left": "تبقّت {count} درجات حرية",
  "sketch.dof_left_one": "تبقّت {count} درجة حرية",
  "sketch.draw_curves": "الرسم كـ {linetype}",
+  "sketch.error.closed_curve_two_crossings": "يحتاج المنحنى المغلق إلى نقطتي تقاطع لقصّه",
+  "sketch.error.nothing_to_break": "لا يوجد هنا ما يمكن كسره",
+  "sketch.error.offset_fillet_chamfer": "`{id}` منحنى إزاحة، وزواياه تتبع منحنياته المصدر: قوّس زوايا المنحنيات المصدر أو اشطفها قبل الإزاحة، أو فك ارتباط الإزاحة أولًا",
+  "sketch.error.offset_trim": "`{id}` منحنى إزاحة، وأطرافه تتبع منحنياته المصدر: عدّل المنحنيات المصدر بدلًا من ذلك، أو فك ارتباط الإزاحة أولًا",
+  "sketch.hint.arc.center_point": "قوس: انقر المركز ثم البداية، ودُر في أي اتجاه وانقر النهاية، أو اكتب زاوية القوس بإشارة موجبة أو سالبة",
+  "sketch.hint.arc.three_point": "قوس: انقر البداية ثم النهاية، ثم نقطة على القوس",
+  "sketch.hint.arc3d": "قوس ثلاثي الأبعاد: انقر البداية ثم النهاية، ثم نقطة على القوس (يمكن أن تقع النقاط خارج مستوى الرسم)",
+  "sketch.hint.break": "كسر: انقر على منحنى في الموضع الذي يُقسم عنده",
+  "sketch.hint.circle.center": "دائرة: انقر المركز، ثم نقطة على الدائرة",
+  "sketch.hint.constraint.generic": "قيد: اختر عناصر الرسم",
+  "sketch.hint.constraint.horizontal_vertical": "أفقي/رأسي: اختر خطًا، أو نقطتين، أو نقطة وخطًا؛ اضغط Shift مع الاستمرار لاختيار منتصف خط",
+  "sketch.hint.constraint.midpoint": "نقطة المنتصف: اختر نقطة وخطًا، أو خطين لتوسيط الثاني على الأول",
+  "sketch.hint.dimension": "البُعد: اختر عنصرًا أو عنصرين واكتب القيمة (أو انقر لوضعه أولًا)؛ انقر على بُعد لتعديله؛ اضغط Enter للتطبيق",
+  "sketch.hint.extend": "تمديد: انقر على منحنى قرب الطرف المراد تمديده (Shift: انقر منحنيين لتمديدهما معًا حتى نقطة التقائهما)",
+  "sketch.hint.fallback": "انقر في الرسم",
+  "sketch.hint.line": "خط: انقر النقاط؛ انقر بالزر الأيمن أو اضغط Esc للإنهاء",
+  "sketch.hint.line3d": "خط ثلاثي الأبعاد: انقر نقاطًا في الفضاء؛ انقر بالزر الأيمن أو اضغط Esc للإنهاء (يمكن أن تقع النقاط خارج مستوى الرسم)",
+  "sketch.hint.open_done": "تم الفتح",
+  "sketch.hint.point3d": "نقطة ثلاثية الأبعاد: انقر حيث توضع النقطة ثلاثية الأبعاد",
+  "sketch.hint.rectangle.center": "مستطيل من المركز: انقر المركز، ثم زاوية",
+  "sketch.hint.rectangle.rounded": "مستطيل مستدير الزوايا: انقر زاويتين متقابلتين (اضغط Tab للانتقال إلى خانة نصف القطر وكتابة نصف قطر الزوايا)",
+  "sketch.hint.rectangle.three_point": "مستطيل بثلاث نقاط: انقر نقطتين على أحد الأضلاع، ثم العرض",
+  "sketch.hint.rectangle.two_point": "مستطيل: انقر زاويتين متقابلتين",
+  "sketch.hint.slot": "شق: انقر الطرفين، ثم العرض",
+  "sketch.hint.spline3d": "منحنى شريحي ثلاثي الأبعاد: انقر نقاط الملاءمة في الفضاء ثلاثي الأبعاد؛ انقر بالزر الأيمن أو اضغط Esc للإنهاء",
+  "sketch.hint.trim": "قص: انقر على الجزء المراد إزالته من المنحنى، أو اسحب عبر الأجزاء المراد إزالتها",
  "sketch.make_selection": "تحويل التحديد إلى {linetype}",
  "sketch.open_ends": "مفتوحة {count}",
  "sketch.status_conflict": "تعارض القيود",
@@ -4201,13 +4325,13 @@
  "thread.automatic_size": "حجم تلقائي",
  "thread.chamfer_depth_needed": "مطلوب لهذا الشكل",
  "thread.designation": "التسمية",
-  "thread.drill_range": "مثقاب صانع اللقمة {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
+  "thread.drill_range": "مثقاب التسنين الذي يوصي به صانعو ذكور التسنين {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
  "thread.drill_range_custom": "المثقاب هو القطر الأكبر ناقص الخطوة، {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
-  "thread.drill_range_taper": "مثقاب صانع اللقمة {drill} مم. القطر الأصغر القياسي عند نهاية السن {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
+  "thread.drill_range_taper": "مثقاب التسنين الذي يوصي به صانعو ذكور التسنين {drill} مم. القطر الأصغر القياسي عند نهاية السن {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
  "thread.end_square": "قائمة",
  "thread.fade_short": "1.25 P (ISO 3508)",
  "thread.fade_standard": "2.5 P (ISO 3508)",
-  "thread.fits_the_face": "يناسب الوجه، مثلاً {example}",
+  "thread.fits_the_face": "يناسب الوجه، مثلًا {example}",
  "thread.form_bspp": "سن أنابيب G (ISO 228-1)",
  "thread.form_bspt": "سن أنابيب مخروطي R، Rc (ISO 7-1)",
  "thread.form_npt": "سن أنابيب مخروطي NPT (ASME B1.20.1)",
@@ -4363,6 +4487,7 @@
  "ui.3d_sketch": "رسم ثلاثي الأبعاد",
  "ui.activate": "تنشيط",
  "ui.active_component": "المكوّن النشط",
+  "ui.addToQuickAccess": "إضافة إلى الوصول السريع",
  "ui.add_configuration": "إضافة تكوين",
  "ui.add_parameter": "إضافة معامل",
  "ui.agent_chat": "محادثة الوكيل",
@@ -4464,7 +4589,7 @@
  "ui.agent_chat_no_images": "هذا الوكيل لا يقبل الصور",
  "ui.agent_chat_no_picture": "لا توجد صورة في الحافظة",
  "ui.agent_chat_no_tool_call": "لم يستخدم النموذج أدوات SolidCraft، لذا لم يتغيّر التصميم. اختر نموذجًا يدعم استدعاء الأدوات؛ راجع «النماذج المحلية» في دليل محادثة الوكيل.",
-  "ui.agent_chat_node_too_old": "إصدار Node.js ‏{version} قديم جدًا لهذا الوكيل. ثبّت Node.js 20.10 أو أحدث، ثم اضغط على تحديث.",
+  "ui.agent_chat_node_too_old": "إصدار Node.js {version} قديم جدًا لهذا الوكيل. ثبّت Node.js 20.10 أو أحدث، ثم اضغط تحديث.",
  "ui.agent_chat_none_found": "لم يُعثر على وكيل برمجي. ثبّت أحد هذه ثم اضغط تحديث:",
  "ui.agent_chat_none_found_short": "لم يُعثر على وكيل",
  "ui.agent_chat_not_installed": "غير مثبت",
@@ -4505,7 +4630,7 @@
  "ui.agent_chat_send_now_tip": "إيقاف خطوة الوكيل الحالية وإرسال هذه بعدها (Ctrl+Enter)",
  "ui.agent_chat_setup_body": "يتواصل SolidCraft مع وكيل برمجة مثبّت على هذا الحاسوب. اختر واحدًا من التفضيلات › الوكيل.",
  "ui.agent_chat_setup_title": "إعداد مساعد",
-  "ui.agent_chat_side": "إرساء المحادثة",
+  "ui.agent_chat_side": "تثبيت المحادثة",
  "ui.agent_chat_signed_in": "سجّل الدخول",
  "ui.agent_chat_state_auth": "يلزم تسجيل الدخول",
  "ui.agent_chat_state_busy": "جارٍ العمل…",
@@ -4570,10 +4695,10 @@
  "ui.ai_key_note": "يُخزّن في سلسلة مفاتيح النظام، وليس في إعدادات SolidCraft أبدًا. اتركه فارغًا لخادم محلي.",
  "ui.ai_keychain_error": "رفضت سلسلة مفاتيح النظام: {error}",
  "ui.ai_kind": "النوع",
-  "ui.ai_mode_all": "فعل كل شيء",
+  "ui.ai_mode_all": "تنفيذ كل شيء",
  "ui.ai_mode_all_note": "لا شيء يسأل أولًا. تبقى تقارير الأعطال محظورة وتظل حدود المجلدات سارية.",
  "ui.ai_mode_all_warning": "يمكن للوكيل حفظ تصميمك والكتابة فوقه وتصديره واستبداله دون سؤال. استخدم هذا فقط مع وكيل تثق به، وعلى تصاميم حفظتها.",
-  "ui.ai_mode_ask": "السؤال أولاً",
+  "ui.ai_mode_ask": "السؤال أولًا",
  "ui.ai_mode_ask_note": "كل تغيير في التصميم وكل إجراء على الملفات ينتظر سماحك.",
  "ui.ai_mode_edits": "إجراء تعديلات",
  "ui.ai_mode_edits_note": "أوامر النمذجة تعمل دون سؤال؛ أما الحفظ والفتح والتصدير وإجراءات الملفات أو الإجراءات الهدّامة الأخرى فتسأل.",
@@ -4697,6 +4822,7 @@
  "ui.click_selects_whole_bodies": "النقر يحدد الأجسام كاملة",
  "ui.click_then_press_key": "انقر ثم اضغط المفتاح الجديد",
  "ui.close": "إغلاق",
+  "ui.close_tab": "إغلاق علامة التبويب",
  "ui.coil": "ملف حلزوني",
  "ui.coincident": "متطابق",
  "ui.collapse": "طي",
@@ -4744,21 +4870,21 @@
  "ui.construction.ribbon_label": "خطوط مساعدة",
  "ui.construction.side_hint": "خط إنشائي: انقر الجهة التي يمتد نحوها الخط؛ انقر بزر الفأرة الأيمن للبدء من جديد",
  "ui.context_menu": "القائمة السياقية",
-  "ui.continuity_crease": "تجعّد",
+  "ui.continuity_crease": "ثنية",
  "ui.continuity_curvature": "الانحناء",
  "ui.continuity_curvature_change": "تغيّر الانحناء",
  "ui.continuity_curvature_change_tip": "تغيّر الانحناء (G3): يتغير الانحناء أيضًا بسلاسة عبر خط الالتقاء.",
  "ui.continuity_curvature_tip": "متصل الانحناء (G2): تمر الانعكاسات دون انكسار.",
-  "ui.continuity_g0": "G0 تجعّد",
+  "ui.continuity_g0": "G0 ثنية",
  "ui.continuity_g1": "G1 مماس",
  "ui.continuity_g2": "G2 انحناء",
  "ui.continuity_gap": "فجوة",
  "ui.continuity_position": "الموضع",
-  "ui.continuity_position_tip": "الموضع (G0): تلتقي الأسطح، مع تجعّد عند التقائها.",
+  "ui.continuity_position_tip": "الموضع (G0): تلتقي الأسطح، مع ثنية عند التقائها.",
  "ui.continuity_smooth_curvature_change": "تغيّر انحناء سلس",
  "ui.continuity_smooth_curvature_change_tip": "تغيّر انحناء سلس (G4): حتى طريقة تغيّر الانحناء تستمر بسلاسة عبر خط الالتقاء.",
  "ui.continuity_tangent": "مماس",
-  "ui.continuity_tangent_tip": "مماس (G1): لا تجعّد، لكن الانحناء يقفز عبر خط الالتقاء.",
+  "ui.continuity_tangent_tip": "مماس (G1): لا ثنية، لكن الانحناء يقفز عبر خط الالتقاء.",
  "ui.copy": "نسخ",
  "ui.copy_details": "نسخ التفاصيل",
  "ui.copy_details_tip": "انسخ الرسالة كاملة للبحث عنها أو للإبلاغ عنها.",
@@ -4784,6 +4910,7 @@
  "ui.default_modelling_orientation": "اتجاه النمذجة الافتراضي",
  "ui.delete": "حذف",
  "ui.delete_select_first": "حدّد أولًا ما تريد حذفه: الميزات أو الأجسام أو المكوّنات أو هندسة الرسم",
+  "ui.dependents_select_first": "حدّد أولًا ما تريد سرد معتمداته",
  "ui.depth": "العمق",
  "ui.design": "التصميم",
  "ui.design_properties.author": "المؤلف",
@@ -4909,10 +5036,15 @@
  "ui.extract_done": "أصبح المكوّن تصميمًا مستقلًا، مرتبطًا هنا.",
  "ui.extrude": "بثق",
  "ui.extrude_auto_to_object": "البثق إلى هدف مختار",
-  "ui.extrude_auto_to_object_tip": "وجه أو رأس أو مستوى موازٍ يغيّر المدى إلى «إلى كائن».",
+  "ui.extrude_auto_to_object_tip": "وجه أو رأس أو مستوى موازٍ يغيّر الامتداد إلى «إلى كائن».",
  "ui.factor": "المعامل",
  "ui.fade": "تلاشٍ",
  "ui.fade_length": "طول التلاشي",
+  "ui.fair_iterations": "عدد التكرارات",
+  "ui.fair_keep_edges": "الحفاظ على الحواف",
+  "ui.fair_strength": "شدة التنعيم",
+  "ui.fair_surface_title": "تنعيم السطح",
+  "ui.fair_tolerance_default": "0.001 من حجم الجسم",
  "ui.feature_history": "سجل الميزات",
  "ui.feature_options": "خيارات الميزة",
  "ui.features": "الميزات",
@@ -4939,9 +5071,13 @@
  "ui.fillet_setback": "مسافة الإرجاع",
  "ui.fillet_setback_hint": "{factor} × نصف القطر",
  "ui.fillet_setback_least": "أكثر من {least}",
-  "ui.fillet_setback_tip": "حيث تبدأ رقعة الزاوية الناعمة: المسافة على طول كل حافة من الزاوية. الافتراضي {factor} ضعف نصف القطر. يجب أن تكون أكبر من أقل مسافة إرجاع، حيث تلتقي الاستدارات بدونها: نصف القطر حيث تكون الأوجه متعامدة.",
+  "ui.fillet_setback_tip": "حيث تبدأ رقعة الزاوية الناعمة: المسافة على طول كل حافة من الزاوية. الافتراضي {factor} ضعف نصف القطر. يجب أن تكون أكبر من أقل مسافة إرجاع، وهي التي تلتقي عندها التقويسات دون إرجاع: نصف القطر حين تكون الأوجه متعامدة.",
  "ui.fillet_smooth_radius": "تغيّر ناعم لنصف القطر",
-  "ui.fillet_type_choices_tip": "نصف قطر ثابت: نصف قطر واحد على طول الحافة.\nطول الوتر: يبقى عرض التقويس نفسه مهما كانت الزاوية بين الوجوه.\nنصف قطر متغيّر: نصف قطر عند كل طرف، ومزيد على طول الحافة إن أضفته.\nمتصل الانحناء: مقطع بلا انكسار في الانعكاسات حيث يلتقي بالوجوه المستوية (G2).\nمنحنى: يتبع نصف القطر على طول الحافة أنصاف أقطار تحكّم تحدّدها.",
+  "ui.fillet_turn": "الالتفاف",
+  "ui.fillet_turn_mitre": "وصلة مائلة",
+  "ui.fillet_turn_swept": "ملتف",
+  "ui.fillet_turn_tip": "حيث يلتف تقويسان حول حافة ركن حادة بينهما، مثل التقويسات على قاعدة نتوء عند حوافه القائمة.\nوصلة مائلة: يمتد التقويسان حتى يلتقيا في وصلة مائلة.\nملتف: يتوقف التقويسان عند حافة الركن ويلتفان حولها، والركن طارة مماسة لكليهما. فقط لتقويسين بنصف قطر واحد حول حافة ركن مستقيمة ومحدبة.",
+  "ui.fillet_type_choices_tip": "نصف قطر ثابت: نصف قطر واحد على طول الحافة.\nطول الوتر: يبقى عرض التقويس نفسه مهما كانت الزاوية بين الوجوه.\nنصف قطر متغيّر: نصف قطر عند كل طرف، ومزيد على طول الحافة إن أضفته.\nمتصل الانحناء: مقطع بلا انكسار في الانعكاسات حيث يلتقي بالوجوه المستوية (G2).\nمنحنى شريحي: يتبع نصف القطر على طول الحافة أنصاف أقطار تحكّم تحدّدها.",
  "ui.fillet_type_curvature": "متصل الانحناء",
  "ui.fillet_type_tip": "المقطع عبر الحافة. متصل الانحناء: مقطع متصل الانحناء (G2) بين وجوه مستوية، فتمر الانعكاسات من الوجوه إلى التقويس دون انكسار.",
  "ui.filter_commands_or_keys": "تصفية الأوامر أو المفاتيح",
@@ -4986,6 +5122,7 @@
  "ui.heading_construct": "إنشاء مرجعي",
  "ui.heading_create": "إنشاء",
  "ui.heading_create_sketch": "إنشاء رسم",
+  "ui.heading_custom_view_navigator": "متصفح العرض المخصص",
  "ui.heading_cylinder": "أسطوانة",
  "ui.heading_design": "التصميم",
  "ui.heading_draft": "ميل السحب",
@@ -5053,7 +5190,7 @@
  "ui.hidePlanes": "إخفاء المستويات",
  "ui.hideProfile": "إخفاء المقطع",
  "ui.hide_component_history": "إخفاء سجله",
-  "ui.hide_origin_by_default": "إخفاء مجلد الأصل في التصاميم الجديدة",
+  "ui.hide_origin_by_default": "إخفاء مجلد نقطة الأصل في التصاميم الجديدة",
  "ui.hide_origin_note": "تبدأ التصاميم الجديدة ومجلد نقطة الأصل مخفي. يحتفظ كل تصميم بإعداد نقطة الأصل الخاص به بمجرد إظهارها أو إخفائها.",
  "ui.history_back": "الرجوع خطوة",
  "ui.history_below_browser": "أسفل المستعرض",
@@ -5093,6 +5230,7 @@
  "ui.inspect": "فحص",
  "ui.instances": "النسخ",
  "ui.intersect": "تقاطع",
+  "ui.intersection_curve_second_pick": "منحنى التقاطع: انقر على الوجه أو المنحنى الثاني (انقر بزر الماوس الأيمن للبدء من جديد)",
  "ui.iso_4753": "ISO 4753",
  "ui.isolate": "عزل",
  "ui.join": "ضم",
@@ -5121,6 +5259,7 @@
  "ui.manipulator_free_alt": "السحب الحر للمُعالج أيضًا مع Alt/Option",
  "ui.manipulator_free_alt_tip": "عند التفعيل: Alt/Option أو Ctrl/Cmd على أسهم البثق / أداة التحويل يعطّل التقاط القيم. عند الإيقاف: Ctrl/Cmd فقط.",
  "ui.manufacture": "التصنيع",
+  "ui.match_surface_title": "مطابقة السطح",
  "ui.material_review.axes": "محاور محلية للمادة؛ لم يُحدد اتجاه للجسم.",
  "ui.material_review.claims": "المصادر والتراخيص ادعاءات غير موثّقة. القيم المفقودة تبقى مجهولة.",
  "ui.material_review.compressive_strength": "مقاومة الانضغاط",
@@ -5143,6 +5282,9 @@
  "ui.material_review.title": "مراجعة بيانات المادة الفيزيائية",
  "ui.material_review.unknown": "مجهول",
  "ui.material_review.yield_strength": "مقاومة الخضوع",
+  "ui.mcp_agents": "الوكلاء عبر MCP",
+  "ui.mcp_compact": "مخرجات مضغوطة",
+  "ui.mcp_compact_note": "للوكلاء المتصلين عبر خادم MCP ‏(solidcraft-cli mcp): يلخّص inspect_design الرسومات، ولا تُنسَّق نتائج الأدوات، فتستهلك رموزًا أقل. يسري على جلسات الوكلاء التي تبدأ بعد التغيير؛ ويفعّله أيضًا ‎--compact أو SOLIDCRAFT_MCP_COMPACT=1.",
  "ui.measure": "قياس",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "3MF مع وسوم الأوجه",
@@ -5184,6 +5326,7 @@
  "ui.options": "الخيارات",
  "ui.orbit": "تدوير العرض",
  "ui.orbit_around": "التدوير حول",
+  "ui.organize": "تنظيم",
  "ui.orientation": "الاتجاه",
  "ui.origin": "نقطة الأصل",
  "ui.palette_construction_mode": "وضع الخطوط المساعدة (X)",
@@ -5228,6 +5371,7 @@
  "ui.point_cloud_add_filter": "إضافة مرشح…",
  "ui.point_cloud_auto_range": "نطاق تلقائي",
  "ui.point_cloud_color_by": "التلوين حسب",
+  "ui.point_cloud_dots": "نقاط منفردة",
  "ui.point_cloud_file_colors": "ألوان الملف",
  "ui.point_cloud_filter_by": "التصفية حسب",
  "ui.point_cloud_height_high": "أعلى ارتفاع",
@@ -5272,6 +5416,7 @@
  "ui.quality": "الجودة",
  "ui.quantity": "الكمية",
  "ui.quantity_2": "الكمية 2",
+  "ui.quick_access_full": "يتسع شريط الوصول السريع لـ {count} أمرًا؛ أزل أحدها لإضافة آخر",
  "ui.quit": "خروج",
  "ui.radial_context_menu": "قائمة سياقية دائرية",
  "ui.radius": "نصف القطر",
@@ -5289,6 +5434,7 @@
  "ui.relink_not_linked": "هذا المكوّن غير مرتبط بتصميم مصدر.",
  "ui.relink_select_one": "حدد مكوّنًا مرتبطًا واحدًا أو إحدى نسخه أولًا.",
  "ui.relink_source_all": "إعادة ربط المصدر (كل النسخ)…",
+  "ui.removeFromQuickAccess": "إزالة من الوصول السريع",
  "ui.removeFromToolbar": "إزالة من شريط الأدوات",
  "ui.removeSection": "إزالة المقطع",
  "ui.render": "التصيير",
@@ -5297,6 +5443,8 @@
  "ui.repeat_nothing": "لا يوجد ما يُكرَّر بعد: ابدأ أداة أو مربع حوار أولًا.",
  "ui.replace_with_link_done": "أصبحت النسخ الآن مواضع للتصميم المرتبط.",
  "ui.report_a_bug": "الإبلاغ عن خطأ",
+  "ui.report_characters_left_one": "الأحرف المتبقية: {count}",
+  "ui.report_characters_left_other": "الأحرف المتبقية: {count}",
  "ui.reset": "إعادة تعيين",
  "ui.reset_all": "إعادة تعيين الكل",
  "ui.reset_the_settings_on_this_page": "إعادة تعيين إعدادات هذه الصفحة",
@@ -5581,6 +5729,14 @@
  "values must be numbers or expressions": "يجب أن تكون القيم أعدادًا أو تعابير",
  "view.auto_ortho_faces": "منظوري أثناء التدوير، ومتعامد على الأوجه",
  "view.render_inspector": "مفتش التصيير",
+  "view_gizmo.arrows": "أسهم التدوير",
+  "view_gizmo.home": "زر العرض الرئيسي",
+  "view_gizmo.no_such_body": "لا يوجد في هذا التصميم جسم بهذا الاسم.",
+  "view_gizmo.note": "اختر جسمًا في العرض. يُحفظ مع تفضيلاتك وملفات تعريف الإعدادات، ويظهر في كل تصميم. انقر أحد أوجهه للنظر إليه مباشرة.",
+  "view_gizmo.texture": "الخامة",
+  "view_gizmo.themed": "حسب السمة",
+  "view_gizmo.too_detailed": "مفصّل أكثر مما يناسب متصفح العرض (أكثر من 10,000 مثلث)",
+  "view_gizmo.too_thin": "طويل ورفيع أكثر مما يناسب متصفح العرض: يجب ألا يقل أرفع جانب عن خُمس أطول جانب",
  "web.files.insert_drawings_hint": "ملفات CAD أو شبكات أو DXF أو SVG إلى التصميم المفتوح",
  "web.files.insert_stored_drawings_hint": "إلى التصميم المفتوح (ملفات CAD، شبكات، DXF، SVG)",
  "web.open_full": "فتح في SolidCraft",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analiza dostupnosti",
  "cmd.inspect_center_of_mass": "Centar mase",
  "cmd.inspect_clearance": "Provjera zazora",
-  "cmd.inspect_colored_components": "Omogući boje komponenti",
-  "cmd.inspect_colored_components_disable": "Onemogući boje komponenti",
  "cmd.inspect_compare": "Uporedi tijela",
  "cmd.inspect_compare_picture": "Uporedi sliku",
  "cmd.inspect_continuity": "Analiza kontinuiteta",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Učitava putanje SVG crteža u skicu, skalirane, zakrenute i postavljene gdje zadate. Koristite ga da logotip ili vektorski obris pretvorite u krive koje možete ekstrudirati.",
  "help.sketch.inspect": "Otvara izvještaj o otvorenoj skici: koliko je stepeni slobode preostalo i je li potpuno ograničena. Koristite ga da saznate šta se još pomjera prije nego što završite skicu.",
  "help.sketch.intersect": "Dodaje krive ili tačke gdje tijela, lica, ivice ili druge skice sijeku ravan skice. Ostaju povezane i prate model kada se promijeni.",
-  "help.sketch.intersection_curve": "Pravi 3D krive tamo gdje se dva tijela ili lica sastaju, povezane s njima. Koristite ih kao putanje ili vodilice koje prate model.",
+  "help.sketch.intersection_curve": "Pravi 3D krive tamo gdje se dva tijela, lica ili krive drugih skica sastaju, povezane s njima. Koristite ih kao putanje ili vodilice koje prate model.",
  "help.sketch.isoparametric_curve": "Pravi 3D krivu u smjeru U ili V lica kroz tačku koju izaberete, povezanu s licem. Koristite je kao putanju ili liniju razdvajanja koja prati površ.",
  "help.sketch.line": "Crta povezane linije tačku po tačku, kao otvoreni lanac ili zatvoren obris. To je osnovni alat za većinu profila.",
  "help.sketch.line.midpoint": "Crta liniju od njene središnje tačke do jednog kraja, a drugi kraj se preslikava. Koristite je za linije centrirane na tački, npr. simetričnu ivicu.",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analýza přístupnosti",
  "cmd.inspect_center_of_mass": "Těžiště",
  "cmd.inspect_clearance": "Vůle",
-  "cmd.inspect_colored_components": "Zapnout barvy komponent",
-  "cmd.inspect_colored_components_disable": "Vypnout barvy komponent",
  "cmd.inspect_compare": "Porovnat tělesa",
  "cmd.inspect_compare_picture": "Porovnat obrázek",
  "cmd.inspect_continuity": "Analýza spojitosti",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Načte cesty výkresu SVG do náčrtu, ve zvoleném měřítku, natočení a poloze. Použijte to k přeměně loga nebo vektorového obrysu na křivky, které lze vysunout.",
  "help.sketch.inspect": "Otevře zprávu o otevřeném náčrtu: kolik stupňů volnosti zbývá a zda je plně zavazbený. Použijte to ke zjištění, co se ještě hýbe, než náčrt dokončíte.",
  "help.sketch.intersect": "Přidá křivky nebo body, kde tělesa, plochy, hrany nebo jiné náčrty protínají rovinu náčrtu. Zůstanou propojené a sledují model, když se změní.",
-  "help.sketch.intersection_curve": "Vytvoří 3D křivky tam, kde se setkávají dvě tělesa nebo plochy, propojené s nimi. Použijte je jako cesty nebo vodicí dráhy, které sledují model.",
+  "help.sketch.intersection_curve": "Vytvoří 3D křivky tam, kde se setkávají dvě tělesa, plochy nebo křivky jiných náčrtů, propojené s nimi. Použijte je jako cesty nebo vodicí dráhy, které sledují model.",
  "help.sketch.isoparametric_curve": "Vytvoří 3D křivku ve směru U nebo V plochy bodem, který vyberete, propojenou s plochou. Použijte ji jako cestu nebo dělicí čáru, která sleduje povrch.",
  "help.sketch.line": "Kreslí spojené úsečky bod po bodu, jako otevřený řetězec nebo uzavřený obrys. Je to základní nástroj pro většinu profilů.",
  "help.sketch.line.midpoint": "Nakreslí úsečku od jejího středu k jednomu konci, přičemž druhý konec se zrcadlí. Použijte to pro úsečky vystředěné na bod, například souměrnou hranu.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Ukázková deska",
  "sample.vents.about": "Drážky v obdélníkovém poli: řádky, sloupce a rozteč jsou parametry",
  "sample.vents.name": "Větrací deska",
+  "scale.per_axis": "Podle os",
+  "scale.uniform": "Rovnoměrně",
  "search.command_keys": "Enter spustit     Shift+Enter spustit a ponechat otevřené     Esc zavřít",
  "search.commands": "Příkazy",
  "search.design": "V tomto návrhu",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Tilgængelighedsanalyse",
  "cmd.inspect_center_of_mass": "Massecentrum",
  "cmd.inspect_clearance": "Frigangskontrol",
-  "cmd.inspect_colored_components": "Aktivér komponentfarver",
-  "cmd.inspect_colored_components_disable": "Deaktivér komponentfarver",
  "cmd.inspect_compare": "Sammenlign emner",
  "cmd.inspect_compare_picture": "Sammenlign billede",
  "cmd.inspect_continuity": "Kontinuitetsanalyse",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Læser stierne i en SVG-tegning ind i en skitse, skaleret, drejet og placeret, som du angiver. Brug den til at gøre et logo eller en vektorkontur til kurver, du kan ekstrudere.",
  "help.sketch.inspect": "Åbner en rapport om den åbne skitse: hvor mange frihedsgrader der er tilbage, og om den er fuldt bundet. Brug den til at finde ud af, hvad der stadig kan bevæge sig, før du afslutter skitsen.",
  "help.sketch.intersect": "Tilføjer de kurver eller punkter, hvor emner, flader, kanter eller andre skitser krydser skitseplanet. De forbliver linkede og følger modellen, når den ændres.",
-  "help.sketch.intersection_curve": "Opretter 3D-kurver, hvor to emner eller flader mødes, linket til dem. Brug dem som baner eller styrekurver, der følger modellen.",
+  "help.sketch.intersection_curve": "Opretter 3D-kurver, hvor to emner, flader eller kurver fra andre skitser mødes, linket til dem. Brug dem som baner eller styrekurver, der følger modellen.",
  "help.sketch.isoparametric_curve": "Opretter en 3D-kurve langs en flades U- eller V-retning gennem et punkt, du vælger, linket til fladen. Brug den som bane eller delelinje, der følger overfladen.",
  "help.sketch.line": "Tegner forbundne linjer punkt for punkt som en åben kæde eller en lukket kontur. Det er det grundlæggende værktøj til de fleste profiler.",
  "help.sketch.line.midpoint": "Tegner en linje fra dens midtpunkt ud til den ene ende, og den anden ende spejles. Brug den til linjer centreret om et punkt, f.eks. en symmetrisk kant.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Eksempelplade",
  "sample.vents.about": "Slidser i et rektangulært mønster: Rækker, kolonner og deling er parametre",
  "sample.vents.name": "Ventilationsplade",
+  "scale.per_axis": "Per akse",
+  "scale.uniform": "Ensartet",
  "search.command_keys": "Enter kør     Shift+Enter kør og hold åben     Esc luk",
  "search.commands": "Kommandoer",
  "search.design": "I dette design",
@@ -628,6 +628,8 @@
  "Suppress Selected Folders": "Ausgewählte Ordner unterdrücken",
  "Suppressed": "Unterdrückt",
  "Surface": "Flächenkörper",
+  "Surface or face": "Flächenkörper oder Fläche",
+  "Surface or faces": "Flächenkörper oder Flächen",
  "Surface, or faces to turn over": "Fläche oder umzudrehende Flächen",
  "Surfaces": "Flächen",
  "Swap Ends": "Enden vertauschen",
@@ -641,6 +643,7 @@
  "Target": "Ziel",
  "Target Body": "Zielkörper",
  "Target Face (optional)": "Zielfläche (optional)",
+  "Target edges": "Zielkanten",
  "Tear": "Reißen",
  "Technical details": "Technische Details",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "Die gestrichelte Skizze ist eine gespeicherte Ebenenführung. Wählen Sie eine neue Fläche, um die Anbindung zu reparieren.",
@@ -648,6 +651,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Die Richtung muss eine Achse oder eine gerade Skizzenkurve in der Skizzenebene sein",
  "The mirror line cannot also be mirrored": "Die Spiegellinie kann nicht gleichzeitig gespiegelt werden",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "Die Spiegellinie muss eine gerade Kurve dieser Skizze sein, keine Ursprungsachse",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "Die Ursprungsachse steht senkrecht auf der Skizzenebene und hat daher keine Linie in ihr",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "Das gespeicherte Autorvorkommen fehlt. Wählen Sie vor dem erneuten Anbinden eine gültige Autorplatzierung.",
  "Then": "Then",
  "These features will be deleted:": "Diese Merkmale werden gelöscht:",
@@ -739,6 +743,9 @@
  "a picked edge's body is gone": "der Körper einer gewählten Kante existiert nicht mehr",
  "add a key for a joint first": "zuerst einen Schlüssel für ein Gelenk hinzufügen",
  "ai.connected_toast": "SolidCraft ist jetzt in {clients} verfügbar. Starten Sie diese neu, um es zu nutzen (Einstellungen > Assistent).",
+  "ai.http.allow": "Unsicheres HTTP erlauben",
+  "ai.http.confirm": "Für diesen Endpunkt erlauben",
+  "ai.http.warning": "Der API-Schlüssel und die Unterhaltung werden unverschlüsselt gesendet. Jeder mit Zugriff auf das Netzwerk kann sie lesen oder verändern. Verwenden Sie dies nur in einem vertrauenswürdigen Netzwerk.",
  "ai.prefs.allow_control": "KI-Agenten verbinden lassen",
  "ai.prefs.allow_control_note": "Ein lokaler Kanal (MCP). Nichts verlässt diesen Computer.\n\nÖffnet einen Steuerkanal nur auf diesem Computer (127.0.0.1, Port 27878 oder der nächste freie). Ein verbindendes Programm muss zusätzlich ein geheimes Token vorweisen, das nur Ihr Benutzerkonto lesen kann und bei jedem Start neu erzeugt wird. Wirkt ab dem nächsten Start von SolidCraft. Aus: Es wartet nichts auf Verbindungen, außer Sie starten SolidCraft mit --control.",
  "ai.prefs.availability": "Verfügbarkeit",
@@ -960,8 +967,6 @@
  "cmd.inspect_accessibility": "Zugänglichkeitsanalyse",
  "cmd.inspect_center_of_mass": "Massenschwerpunkt",
  "cmd.inspect_clearance": "Freiraum",
-  "cmd.inspect_colored_components": "Komponentenfarben einschalten",
-  "cmd.inspect_colored_components_disable": "Komponentenfarben ausschalten",
  "cmd.inspect_compare": "Körper vergleichen",
  "cmd.inspect_continuity": "Kontinuitätsprüfung",
  "cmd.inspect_curvature_comb": "Krümmungskamm-Analyse",
@@ -1076,6 +1081,9 @@
  "cmd.render.compare.divider": "Render-Vergleichstrenner verschieben",
  "cmd.render.result.discard": "Renderergebnis verwerfen",
  "cmd.render.result.select": "Renderergebnis auswählen",
+  "cmd.render.surface.import": "Oberflächentexturen importieren",
+  "cmd.render.texture.list": "Eingebettete Oberflächenbilder auflisten",
+  "cmd.render.texture.remove": "Eingebettetes Oberflächenbild entfernen",
  "cmd.render_aging_describe": "Mehrschichtige Oberflächenalterung",
  "cmd.render_backends": "Render-Backends",
  "cmd.render_batch": "Alle Aufnahmen rendern",
@@ -1291,6 +1299,7 @@
  "cmd.timeline_stop": "Verlauf anhalten",
  "cmd.timeline_suppress": "Merkmal unterdrücken",
  "cmd.ui.assistant": "Assistenten ein-/ausblenden",
+  "cmd.view.navigator": "Eigener Ansichtsnavigator",
  "cmd.view.render_browser": "Render-Browser",
  "cmd.view.render_dock": "Render-Panel verschieben",
  "cmd.view.render_focus": "Render-Fokusansicht",
@@ -1389,11 +1398,17 @@
  "dialog.computing": "Wird berechnet… {seconds} s",
  "dialog.could_not_be_checked": "nicht prüfbar",
  "dialog.custom_axis": "↖ Eigene Achse",
+  "dialog.cylinder_face_tip": "Die Fläche oder der Eckpunkt des Modells, auf dem der Zylinder steht: hier klicken, dann in der Ansicht darauf klicken. Leer gelassen platzieren ihn X, Y und Z.",
  "dialog.dimension_insert_hint": "Doppelklicken Sie auf eine andere steuernde Bemaßung, um ihren Namen einzufügen",
  "dialog.dimension_name": "Bemaßung: {name}",
+  "dialog.dimension_step_down": "Um {step} verringern",
+  "dialog.dimension_step_expression": "Nur eine Zahl lässt sich schrittweise ändern; ein Ausdruck bleibt, wie er eingegeben ist",
+  "dialog.dimension_step_up": "Um {step} erhöhen",
  "dialog.edit_title": "{title} bearbeiten",
  "dialog.no_shown_body": "Kein sichtbarer Körper zum Ändern vorhanden. Blenden Sie einen Körper ein oder wählen Sie „Neuer Körper“.",
  "dialog.pattern_sketch_not_object": "Körper oder Funktionen wählen: Eine Skizze ist keines von beiden. Ihre Kurven mit Muster oder Spiegeln in der Skizze wiederholen oder sie zuerst extrudieren.",
+  "dialog.primitive_point_tip": "Ein Punkt, der X, Y und Z füllt: hier klicken, dann einen Eckpunkt, eine Kante oder Fläche des Modells, einen Punkt einer Skizze oder den Ursprung anklicken.",
+  "dialog.reference_edge_tip": "Eine gerade Kante der gewählten Fläche, von der aus der Abstand darunter gemessen wird: hier klicken, dann die Kante anklicken.",
  "dialog.select": "↖ Auswählen",
  "dialog.selected_count": "↖ {count} ausgewählt",
  "dialog.selection_constraint": "Bedingung {id}",
@@ -1415,6 +1430,7 @@
  "document.read_only_save": "Dieses Design wurde schreibgeschützt geöffnet: Speichern Sie es als neue Datei",
  "document.save_changes": "Änderungen in {name} speichern?",
  "document.save_copy": "Kopie speichern…",
+  "document.tab_unsaved_changes": "Ungespeicherte Änderungen",
  "document.unsaved_changes": "{name} enthält ungespeicherte Änderungen. Wenn Sie nicht speichern, gehen sie verloren.",
  "drive.rigid": "{joint} ist ein starres Gelenk. Es hält die verbundenen Teile fest zusammen und ermöglicht daher keine Bewegung. Um die Teile beweglich zu machen, ändern Sie den Gelenktyp unter „Gelenk bearbeiten“: Drehgelenk für Drehbewegungen, Schubgelenk für lineare Bewegungen oder Zylindergelenk für beides.",
  "drive.stopped_by_contact": "Angehalten bei {value}: {a} würde {b} durchdringen",
@@ -1435,10 +1451,16 @@
  "each rail's curves must be in one sketch": "die Kurven jeder Führungskurve müssen in derselben Skizze liegen",
  "feature computation ended without a result": "die Berechnung des Merkmals wurde ohne Ergebnis beendet",
  "file.open.drawing_filter": "Designs, CAD-Dateien, Netze und Zeichnungen",
+  "file.open.portal_fallback.no_portal_service": "Die geöffnete Dateiauswahl ist nicht die des Desktops: Der Dateiauswahl-Dienst des Desktops ist nicht verfügbar.",
+  "file.open.portal_fallback.no_session_bus": "Die geöffnete Dateiauswahl ist nicht die des Desktops: Es gibt keinen D-Bus-Sitzungsbus.",
+  "file.open.portal_fallback.xwayland": "Die geöffnete Dateiauswahl ist nicht die des Desktops: Unter XWayland lehnt das Portal das Elternfenster ab.",
  "file_load.built": "Bisher erstellt: {built} von {total} Merkmalen.",
  "file_load.converting": "Volumenkörper {done} von {total} wird konvertiert",
+  "file_load.inserted": "{name} eingefügt",
  "file_load.inserting": "Geometrie wird eingefügt",
  "file_load.link_item": "{name} ({done} von {total})",
+  "file_load.opened": "{name} geöffnet",
+  "file_load.opened_in_tab": "{name} in neuem Tab geöffnet",
  "file_load.opening": "Design wird geöffnet",
  "file_load.preparing_thumbnail": "Vorschaubild wird vorbereitet...",
  "file_load.preparing_view": "Ansicht wird vorbereitet...",
@@ -1674,7 +1696,7 @@
  "help.sketch.insert_svg": "Liest die Pfade einer SVG-Zeichnung in eine Skizze ein, skaliert, gedreht und an der gewünschten Stelle. Damit machen Sie aus einem Logo oder einer Vektorkontur Kurven, die sich extrudieren lassen.",
  "help.sketch.inspect": "Öffnet einen Bericht zur offenen Skizze: wie viele Freiheitsgrade übrig sind und ob sie vollständig bestimmt ist. Damit sehen Sie, was sich noch bewegt, bevor Sie die Skizze abschließen.",
  "help.sketch.intersect": "Fügt die Kurven oder Punkte hinzu, an denen Körper, Flächen, Kanten oder andere Skizzen die Skizzenebene schneiden. Sie bleiben verknüpft und folgen Änderungen am Modell.",
-  "help.sketch.intersection_curve": "Erzeugt 3D-Kurven, wo sich zwei Körper oder Flächen treffen, mit diesen verknüpft. Als Pfade oder Leitkurven, die dem Modell folgen.",
+  "help.sketch.intersection_curve": "Erzeugt 3D-Kurven, wo sich zwei Körper, Flächen oder Kurven anderer Skizzen treffen, mit diesen verknüpft. Als Pfade oder Leitkurven, die dem Modell folgen.",
  "help.sketch.isoparametric_curve": "Erzeugt eine 3D-Kurve in U- oder V-Richtung einer Fläche durch einen gewählten Punkt, mit der Fläche verknüpft. Als Pfad oder Trennlinie, die der Fläche folgt.",
  "help.sketch.line": "Zeichnet verbundene Linien Punkt für Punkt, als offene Kette oder geschlossene Kontur. Das Grundwerkzeug für die meisten Profile.",
  "help.sketch.line.midpoint": "Zeichnet eine Linie von ihrem Mittelpunkt zu einem Ende, das andere Ende gespiegelt. Für Linien, die auf einem Punkt mittig liegen, etwa eine symmetrische Kante.",
@@ -1982,6 +2004,7 @@
  "material.selection.mixed": "Unterschiedliche Materialien",
  "measure.at": "Bei",
  "measure.item": "Element {number}",
+  "measure.line_to_centre": "Linie zum Mittelpunkt",
  "measure.quick_copied": "Messwert kopiert",
  "measure.quick_copy": "Klicken, um den Messwert zu kopieren",
  "measure.quick_edges": "{count} Kanten",
@@ -2012,6 +2035,8 @@
  "nav.blender.help": "Mittlere Maustaste dreht, Umschalt+Mitte verschiebt, Strg+Mitte zoomt; rechtes Ziehen lässt die Kamera unverändert",
  "nav.creo.help": "Ziehen mit der mittleren Maustaste dreht, Umschalt+Mitte verschiebt, Strg+Mitte zoomt beim vertikalen Ziehen (nach unten zum Vergrößern); das Mausrad zoomt",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "Ein Ziehen mit der mittleren oder rechten Taste dreht, verschiebt oder zoomt weiter wie begonnen, bis die Taste losgelassen wird, egal welche Tasten dabei gedrückt oder losgelassen werden. Aus: Die gehaltenen Tasten entscheiden in jedem Moment des Ziehens.",
+  "nav.drag_keeps_mode.label": "Ziehen behält die Navigation bei, mit der es begann",
  "nav.free_orbit.help": "Maus und 3D-Maus drehen über beide Pole hinweg und behalten die Rollneigung bei. Das Einrasten mit Umschalt ist deaktiviert.",
  "nav.free_orbit.label": "Freie Drehung",
  "nav.free_orbit.snap_help": "Maus und 3D-Maus drehen über beide Pole hinweg und behalten die Rollausrichtung bei. Halten Sie beim Ziehen zum Drehen die Umschalttaste gedrückt, um Blickrichtung und Rollausrichtung einrasten zu lassen.",
@@ -2248,6 +2273,14 @@
  "prefs.auto_operation_note": "Vereinigung, Neuer Körper oder Schnitt, je nachdem, was das Material berührt.",
  "prefs.axes": "Achsen",
  "prefs.axis": "Achse",
+  "prefs.blur_cost": "Relativer Renderaufwand. Mehr Balken bedeuten meist mehr Arbeit.",
+  "prefs.blur_device": "Auf diesem Grafikgerät oder Renderpfad nicht verfügbar",
+  "prefs.blur_guard": "Die Unschärfequalität wurde für flüssigere Bilder verringert. Der Radius bleibt unverändert.",
+  "prefs.blur_off": "Aus",
+  "prefs.blur_reduce_transparency": "Durch die Systemeinstellung zur Transparenzreduzierung deaktiviert",
+  "prefs.blur_software": "Mit Softwaregrafik nicht verfügbar (gpu-software)",
+  "prefs.blur_source": "In dieser Arbeitsbereichsansicht nicht verfügbar",
+  "prefs.blur_web": "Auf diesem Web-Renderpfad nicht verfügbar",
  "prefs.bodies_folders": "Körperordner",
  "prefs.bodies_folders_always": "Immer",
  "prefs.bodies_folders_never": "Nie",
@@ -2261,6 +2294,8 @@
  "prefs.browser_eye_left": "Auge neben dem Aufklapppfeil",
  "prefs.browser_eye_left_note": "Browserzeilen zeigen ihr Auge zum Ein- und Ausblenden wie bisher neben dem Aufklapppfeil statt in einer Spalte am rechten Zeilenende.",
  "prefs.browser_reveal_on_hover": "Beim Überfahren einblenden",
+  "prefs.browser_rows_start_closed": "Browser-Zeilen beginnen geschlossen",
+  "prefs.browser_rows_start_closed_note": "Platzierungen und Ordner im Browser beginnen geschlossen, sodass ein Entwurf mit vielen Komponenten seine obersten Zeilen zeigt. Jede öffnet sich mit ihrem Pfeil, „Alle ausklappen“ oder „Im Browser suchen“, das nur die Zeilen bis zu seinem Körper öffnet und die von der letzten Suche geöffneten wieder schließt. Ein in der 3D-Ansicht gewählter Körper lässt den Browser, wie er ist. Ist es aus, beginnen die Ordner geöffnet, Platzierungen so, wie „Komponenten zu Beginn aufgeklappt“ es festlegt, und eine Auswahl in der 3D-Ansicht öffnet den Browser bis zu ihrem Körper, wie bisher.",
  "prefs.browser_show_note": "Angezeigt lässt den Browser auf dem Bildschirm. Beim Überfahren einblenden blendet ihn aus, bis der Zeiger über seinen Platz oder die schmale Lasche an seinem linken Rand kommt; er bleibt offen, solange der Zeiger darin ist oder ein Menü daraus offen ist.",
  "prefs.browser_shown": "Angezeigt",
  "prefs.built_in": "Integriert",
@@ -2271,6 +2306,7 @@
  "prefs.carousel_previous": "Zurück",
  "prefs.choose_font": "Schriftdatei auswählen…",
  "prefs.click": "Klicken",
+  "prefs.command_dialog_values": "Befehlsdialoge",
  "prefs.contact_shading": "Weiche Kontaktschattierung",
  "prefs.contact_shading_note": "Erzeugt weiche Schatten an Stellen, an denen sich Bauteile nahekommen.",
  "prefs.context_menu": "Kontextmenü",
@@ -2306,6 +2342,13 @@
  "prefs.dialogs_edge": "Am Rand der Ansicht",
  "prefs.dialogs_left_column": "In der linken Spalte",
  "prefs.dialogs_note": "Wo Befehlsdialoge öffnen: am Rand der Ansicht angedockt oder in der linken Spalte anstelle von Browser und Verlauf, die beim Schließen des Dialogs wie zuvor zurückkehren.",
+  "prefs.dimension_step_angle": "Was die Pfeile des Fensters, Auf/Ab und das Mausrad zu einem Winkel addieren",
+  "prefs.dimension_step_length": "Was die Pfeile des Fensters, Auf/Ab und das Mausrad zu einer Länge addieren",
+  "prefs.dimension_steps": "Schritte im Fenster",
+  "prefs.dimension_values": "Bemaßungswerte",
+  "prefs.dimension_values_note": "Wo der Wert einer Bemaßung eingegeben wird. Ein Fenster hat Pfeile, die ihn schrittweise ändern; das Bemaßungswerkzeug platziert zuerst den Text.",
+  "prefs.dimension_values_view": "In der Ansicht",
+  "prefs.dimension_values_window": "In einem Fenster",
  "prefs.display": "Anzeige",
  "prefs.edges": "Kanten und Schattierung",
  "prefs.extend": "Erweitern",
@@ -2359,6 +2402,8 @@
  "prefs.graphics_page.surfaces_edges": "Flächen und Kanten",
  "prefs.graphics_page.view_bar": "Auch in der Ansichtsleiste",
  "prefs.graphics_presets_note": "Mit den Profilen werden die unten aufgeführten Optionen gemeinsam eingestellt.",
+  "prefs.ground_shadow_follows_model": "Bodenschatten folgt dem Modell",
+  "prefs.ground_shadow_follows_model_help": "Den Schatten unter dem niedrigsten sichtbaren Körper platzieren. Wenn deaktiviert, bleibt der Schatten angehobener Modelle auf der Bodenebene durch den Ursprung.",
  "prefs.hide_constraint_glyphs_zoomed_out": "Bindungssymbole bei starkem Herauszoomen ausblenden",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "Bindungssymbole verschwinden, wenn die Skizze so weit herausgezoomt ist, dass sie sie überladen würden. Aus: sie behalten bei jedem Zoom eine feste Bildschirmgröße.",
  "prefs.history": "Verlauf",
@@ -2394,6 +2439,8 @@
  "prefs.layout_page.card": "Karte",
  "prefs.layout_page.column": "Spalte",
  "prefs.layout_page.hover": "Bei Mauszeiger",
+  "prefs.layout_page.hover_panel_menus": "Bereichsmenüs beim Darüberfahren wechseln",
+  "prefs.layout_page.hover_panel_menus_help": "Klicken Sie auf einen Bereichsnamen, um das Menü zu öffnen. Bewegen Sie den Zeiger auf einen anderen Bereichsnamen, um das Menü zu wechseln. Außerhalb des Menübands und des geöffneten Menüs schließt es sich.",
  "prefs.layout_page.icons_labels": "Symbole + Beschriftungen",
  "prefs.layout_page.ok_cancel": "OK und Abbrechen",
  "prefs.layout_page.on_hover": "Bei Mauszeiger",
@@ -2496,6 +2543,8 @@
  "prefs.quality_smoother": "Stärker geglättet",
  "prefs.quick_measure": "Schnellmessung in der Ecke der Ansicht",
  "prefs.quick_measure_note": "Zeigt unten rechts in der Ansicht die Größe der Auswahl an: bei einer Kante die Länge, bei einer kreisförmigen Kante zusätzlich Durchmesser (Ø) und Radius (R), bei einer Fläche den Flächeninhalt, bei einem Punkt die Position, bei zwei Elementen Abstand und Winkel sowie bei mehreren Kanten oder Flächen die Gesamtlänge bzw. Gesamtfläche. Ein Klick kopiert den Messwert.",
+  "prefs.remember_dialog_values": "Befehlsdialogwerte merken",
+  "prefs.remember_dialog_values.help": "Standardmäßig aus. Wenn aktiviert, werden nach erfolgreicher Ausführung eines Befehls seine sicheren Werte und Optionen beim nächsten Öffnen desselben Befehls wiederverwendet, bis SolidCraft geschlossen wird.",
  "prefs.render_previous_geometry_budget": "Bisheriges Geometriebudget für die Render-Vorschau verwenden",
  "prefs.render_previous_geometry_budget_help": "Stellt die bisherige feste Obergrenze für die Geometrie wieder her (512 MiB auf 64-Bit-Desktop-Systemen, andernfalls 128 MiB) anstelle des geräteabhängigen Budgets.",
  "prefs.reports_saved": "{n} gespeichert",
@@ -2511,6 +2560,8 @@
  "prefs.search": "Einstellungen suchen",
  "prefs.search_empty": "Keine passenden Einstellungen",
  "prefs.select": "Auswählen",
+  "prefs.select_hidden_edges": "Verdeckte Kanten in der schattierten Ansicht mit verdeckten Kanten auswählen",
+  "prefs.select_hidden_edges_help": "Kanten durch Flächen auswählen, wenn die schattierte Ansicht mit verdeckten Kanten aktiv ist, auch zum Verrunden. Aus behält das Auswahlverhalten von v0.30.1 bei. Ausgeblendete Körper bleiben ausgeschlossen.",
  "prefs.select_one_item": "Ein Element auswählen",
  "prefs.select_other_hidden": "Verborgene Geometrie mit „Andere auswählen“ auswählen",
  "prefs.select_other_hidden_help": "Ein: Verborgene Körper, Skizzen und verdeckte Kanten nahe dem Zeiger einbeziehen. Aus: Die ursprüngliche Liste sichtbarer Geometrie direkt unter dem Zeiger verwenden.",
@@ -2535,6 +2586,8 @@
  "prefs.sketch.click_selects": "Klick wählt",
  "prefs.sketch.conflict_colour": "Konfliktfarbe",
  "prefs.sketch.drawing": "Zeichnen",
+  "prefs.sketch.ellipse_axes": "Ellipsen mit ihren Achsen zeichnen",
+  "prefs.sketch.ellipse_axes_note": "Haupt- und Nebenachse als Konstruktionslinien, damit Halbachsen und Achsen bemaßt werden können. Aus: nur die Ellipse, und D darauf ergibt ihren Nebenradius, wohin der Wert auch gezogen wird, gezeichnet und mit R beschriftet wie bisher.",
  "prefs.sketch.exit_keep": "Beibehalten",
  "prefs.sketch.exit_previous": "Zur Ansicht davor zurückkehren",
  "prefs.sketch.exit_unless_rotated": "Außer bei Drehung",
@@ -2628,6 +2681,10 @@
  "prefs.theme_follow_off": "Aus",
  "prefs.theme_follow_stop": "Nicht mehr folgen",
  "prefs.theme_import_hint": "Klicken, um eine Designdatei zu wählen, eine hierher ziehen oder mit kopiertem Design Strg+V (Cmd+V auf dem Mac) drücken",
+  "prefs.theme_notice_dismiss": "Ausblenden",
+  "prefs.theme_option_blur": "Unschärfe hinter Panels",
+  "prefs.theme_option_blur_help": "Unschärfe hinter durchscheinenden Panels in physischen Pixeln. Null bedeutet aus.",
+  "prefs.theme_option_invalid": "Der gespeicherte Wert für {option} ist ungültig; der Designstandard wird verwendet. Der gespeicherte Wert bleibt erhalten.",
  "prefs.theme_option_opacity": "Deckkraft",
  "prefs.theme_option_opacity_help": "Deckkraft schwebender Bedienfelder anpassen. Eine Mindestdeckkraft schützt die Lesbarkeit über den Ansichtsfarben.",
  "prefs.theme_option_tab_colours": "Tabfarben",
@@ -2636,6 +2693,7 @@
  "prefs.theme_option_tab_fade_ms_help": "Panel- und Ansichtsfarben beim Tabwechsel überblenden. Null wechselt sofort.",
  "prefs.theme_options_badge": "Optionen",
  "prefs.theme_options_more": "Mehr · {count}",
+  "prefs.theme_options_newer": "Dieses Design benötigt eine neuere Version von SolidCraft. Nach dem Upgrade das Originaldesign erneut importieren, um seine Optionsdefinitionen wiederherzustellen.",
  "prefs.theme_options_reset": "Zurücksetzen",
  "prefs.theme_options_unavailable": "Auf diesem Gerät nicht verfügbar",
  "prefs.theme_paste": "Design einfügen",
@@ -3220,9 +3278,11 @@
  "render.frame_wide": "16:9 · Breitbild",
  "render.gpu_depth": "Maximale Pfadtiefe",
  "render.gpu_options_help": "Samples, Tiefe, Startwert und Belichtung werden mit diesem Setup gespeichert. Es wird nur die aktive Bildmethode gespeichert.",
+  "render.gpu_path_crashed": "SolidCraft wurde beim letzten Einrichten auf diesem Grafikadapter beendet, wahrscheinlich im Grafiktreiber, und richtet ihn deshalb nicht von selbst erneut ein. Verwenden Sie stattdessen Raytracing auf der CPU oder versuchen Sie es erneut (nach einem Treiberupdate wird es ebenfalls erneut versucht).",
  "render.gpu_path_failed": "GPU-Pathtracer nicht verfügbar",
  "render.gpu_path_first_setup": "Das erste Setup auf dieser GPU kann mehrere Minuten dauern; SolidCraft bleibt währenddessen bedienbar. Spätere Starts verwenden die kompilierten Shader erneut, sofern der Treiber sie behält.",
  "render.gpu_path_preparing": "GPU-Pathtracer: Shader werden kompiliert…",
+  "render.gpu_path_retry": "Erneut versuchen",
  "render.gpu_seed": "Zufallsstartwert",
  "render.gpu_unavailable": "GPU-Pathtracing ist auf diesem Gerät nicht bereit.",
  "render.ground_apply": "Boden anpassen und speichern",
@@ -3836,6 +3896,7 @@
  "render.stage_panels.extent": "Ausdehnung",
  "render.stage_panels.fit_save": "Einpassen und speichern",
  "render.stage_panels.gpu_required": "Benötigt GPU-Pfadverfolgung",
+  "render.stage_panels.grain_angle": "Maserungswinkel",
  "render.stage_panels.keep": "Behalten",
  "render.stage_panels.kept": "Beibehalten",
  "render.stage_panels.kept_fields": "Kamera, Abtastung, Abmessungen, optische Bindungen, CAD-Geometrie und technische Eigenschaften.",
@@ -3954,6 +4015,19 @@
  "render.subsurface_enable": "Random Walk für innere Streuung",
  "render.subsurface_help": "Nur für geschlossene Dielektrika. Streuung und RGB-Absorption sind getrennte Koeffizienten pro mm. Pfade streuen innerhalb der tatsächlichen Geometrie und werden dann an der Grenzfläche gebrochen oder reflektiert. Deaktivieren Sie die Transmission gerader Schattenstrahlen, das Entrauschen von Oberflächen und das äußere Volumen; verwenden Sie eine Fresnel-Schicht. Kein Diffusions-Shader, kein Dichtegitter und kein gemessenes Material. Dichte Medien können mehr Samples und Pfadtiefe benötigen.",
  "render.subsurface_rate": "Streukollisionsrate",
+  "render.surface_import.author": "Autor",
+  "render.surface_import.busy": "Bild wird importiert…",
+  "render.surface_import.complete": "Wählen Sie ein Bild und geben Sie Autor, Quelle und Lizenz an.",
+  "render.surface_import.embedded": "Importiertes Bild",
+  "render.surface_import.failed": "Der Bildimport wurde nicht abgeschlossen.",
+  "render.surface_import.license": "Lizenz / Eigentum",
+  "render.surface_import.raytrace_required": "Bilder erfordern CPU- oder GPU-Raytracing. Wählen Sie es unter Ausgabe.",
+  "render.surface_import.repeat_u": "Wiederholung U",
+  "render.surface_import.repeat_v": "Wiederholung V",
+  "render.surface_import.save": "Bild am Körper speichern",
+  "render.surface_import.saved_cpu": "Speichern Sie Texturen für das CPU-Rendering.",
+  "render.surface_import.source": "Quelle",
+  "render.surface_import.title": "Bild importieren",
  "render.tone_aces_fitted": "ACES angepasst",
  "render.tone_reinhard": "Reinhard",
  "render.transmission_scope": "GPU-Glas unterstützt zertifizierte getrennte Medien. Unbeschränkt verschachtelte Medien und ein rauschfreier Transmissionsschätzer werden nicht bereitgestellt.",
@@ -4030,6 +4104,8 @@
  "sample.plate.name": "Beispielplatte",
  "sample.vents.about": "Langlöcher in einem Rechteckmuster: Zeilen, Spalten und Abstand sind Parameter",
  "sample.vents.name": "Lüftungsplatte",
+  "scale.per_axis": "Je Achse",
+  "scale.uniform": "Gleichmäßig",
  "search.command_keys": "Eingabe ausführen     Umschalt+Eingabe ausführen und offen lassen     Esc schließen",
  "search.commands": "Befehle",
  "search.design": "In diesem Design",
@@ -4672,6 +4748,7 @@
  "ui.click_selects_whole_bodies": "Klick wählt ganze Körper aus",
  "ui.click_then_press_key": "Klicken, dann die neue Taste drücken",
  "ui.close": "Schließen",
+  "ui.close_tab": "Tab schließen",
  "ui.coil": "Schraube",
  "ui.coincident": "Koinzident",
  "ui.collapse": "Einklappen",
@@ -4759,6 +4836,7 @@
  "ui.default_modelling_orientation": "Standard-Modellierungsorientierung",
  "ui.delete": "Löschen",
  "ui.delete_select_first": "Wählen Sie zuerst aus, was gelöscht werden soll: Features, Körper, Komponenten oder Skizzengeometrie",
+  "ui.dependents_select_first": "Wählen Sie zuerst aus, wessen Abhängige aufgelistet werden sollen",
  "ui.depth": "Tiefe",
  "ui.design": "Design",
  "ui.design_properties.author": "Autor",
@@ -4886,6 +4964,11 @@
  "ui.factor": "Faktor",
  "ui.fade": "Auslauf",
  "ui.fade_length": "Auslauflänge",
+  "ui.fair_iterations": "Iterationen",
+  "ui.fair_keep_edges": "Kanten behalten",
+  "ui.fair_strength": "Stärke",
+  "ui.fair_surface_title": "FLÄCHENBEGRADIGUNG",
+  "ui.fair_tolerance_default": "0,001 der Körpergröße",
  "ui.feature_history": "Feature-Verlauf",
  "ui.feature_options": "Funktionsoptionen",
  "ui.features": "Funktionen",
@@ -4914,6 +4997,10 @@
  "ui.fillet_setback_least": "Mehr als {least}",
  "ui.fillet_setback_tip": "Wo das glatte Eckflächenstück beginnt: wie weit von der Ecke entlang jeder Kante. Standard ist {factor} × der Radius. Er muss größer sein als der kleinste Rücksprung, wo sich die Rundungen ohne ihn treffen: der Radius, wo die Flächen rechtwinklig zueinander stehen.",
  "ui.fillet_smooth_radius": "Radius glatt ändern",
+  "ui.fillet_turn": "Wendungen",
+  "ui.fillet_turn_mitre": "Gehrung",
+  "ui.fillet_turn_swept": "Geschwenkt",
+  "ui.fillet_turn_tip": "Wo zwei Rundungen um eine scharfe Eckkante zwischen ihnen herumlaufen, etwa die Rundungen am Fuß eines Zapfens an seinen senkrechten Kanten.\nGehrung: Die Rundungen laufen weiter, bis sie sich in einer Gehrung treffen.\nGeschwenkt: Die Rundungen enden an der Eckkante und schwenken um sie herum; die Ecke ist ein Torus, tangential zu beiden. Nur für Rundungen mit einem Radius um eine gerade, konvexe Eckkante.",
  "ui.fillet_type_choices_tip": "Konstanter Radius: ein Radius entlang der ganzen Kante.\nSehnenlänge: die Breite der Rundung bleibt gleich, in welchem Winkel die Flächen auch aufeinandertreffen.\nVariabler Radius: ein Radius an jedem Ende und weitere entlang der Kante, wenn Sie sie hinzufügen.\nKrümmungsstetig: ein Querschnitt ohne Knick in den Spiegelungen, wo er auf ebene Flächen trifft (G2).\nSpline: der Radius entlang der Kante folgt Steuerradien, die Sie festlegen.",
  "ui.fillet_type_curvature": "Krümmungsstetig",
  "ui.fillet_type_tip": "Der Querschnitt über die Kante. Krümmungsstetig: ein krümmungsstetiger Querschnitt (G2) zwischen ebenen Flächen, sodass Spiegelungen ohne Knick von den Flächen in die Rundung laufen.",
@@ -4959,6 +5046,7 @@
  "ui.heading_construct": "KONSTRUKTION",
  "ui.heading_create": "ERSTELLEN",
  "ui.heading_create_sketch": "SKIZZE ERSTELLEN",
+  "ui.heading_custom_view_navigator": "EIGENER ANSICHTSNAVIGATOR",
  "ui.heading_cylinder": "ZYLINDER",
  "ui.heading_design": "DESIGN",
  "ui.heading_draft": "ABZIEHEN",
@@ -5063,6 +5151,7 @@
  "ui.inspect": "Prüfen",
  "ui.instances": "Instanzen",
  "ui.intersect": "Schnitt",
+  "ui.intersection_curve_second_pick": "Schnittkurve: zweite Fläche oder Kurve anklicken (Rechtsklick zum Neubeginn)",
  "ui.isolate": "Isolieren",
  "ui.join": "Verbinden",
  "ui.joint_play": "▶ Abspielen",
@@ -5090,6 +5179,7 @@
  "ui.manipulator_free_alt": "Freies Ziehen des Manipulators auch mit Alt/Option",
  "ui.manipulator_free_alt_tip": "An: Alt/Option oder Strg/Cmd auf Extrusions-/Gizmo-Pfeilen deaktiviert das Einrasten von Werten. Aus: nur Strg/Cmd.",
  "ui.manufacture": "Fertigung",
+  "ui.match_surface_title": "FLÄCHENANPASSUNG",
  "ui.material_review.axes": "Materiallokale Achsen; keine Körperausrichtung zugewiesen.",
  "ui.material_review.claims": "Quellen und Lizenzen sind ungeprüfte Angaben. Fehlende Werte bleiben unbekannt.",
  "ui.material_review.compressive_strength": "Druckfestigkeit",
@@ -5112,6 +5202,9 @@
  "ui.material_review.title": "Physikalische Materialdaten prüfen",
  "ui.material_review.unknown": "Unbekannt",
  "ui.material_review.yield_strength": "Streckgrenze",
+  "ui.mcp_agents": "Agenten über MCP",
+  "ui.mcp_compact": "Kompakte Ausgabe",
+  "ui.mcp_compact_note": "Für Agenten, die über den MCP-Server (solidcraft-cli mcp) verbunden sind: inspect_design fasst Skizzen zusammen und Werkzeugergebnisse werden nicht formatiert, sodass sie weniger Tokens verbrauchen. Gilt für Agentensitzungen, die nach der Änderung beginnen; --compact oder SOLIDCRAFT_MCP_COMPACT=1 schalten es ebenfalls ein.",
  "ui.measure": "Messen",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "3MF mit Flächenmarken",
@@ -5153,6 +5246,7 @@
  "ui.options": "Optionen",
  "ui.orbit": "Drehen",
  "ui.orbit_around": "Umkreisen um",
+  "ui.organize": "Organisieren",
  "ui.orientation": "Ausrichtung",
  "ui.origin": "Ursprung",
  "ui.palette_construction_mode": "Konstruktionsmodus (X)",
@@ -5197,6 +5291,7 @@
  "ui.point_cloud_add_filter": "Filter hinzufügen…",
  "ui.point_cloud_auto_range": "Bereich automatisch",
  "ui.point_cloud_color_by": "Färben nach",
+  "ui.point_cloud_dots": "Einzelpunkte",
  "ui.point_cloud_file_colors": "Farben der Datei",
  "ui.point_cloud_filter_by": "Filtern nach",
  "ui.point_cloud_height_high": "Oberste Höhe",
@@ -5266,6 +5361,8 @@
  "ui.repeat_nothing": "Noch nichts zu wiederholen: Starten Sie zuerst ein Werkzeug oder einen Dialog.",
  "ui.replace_with_link_done": "Die Kopien sind jetzt Platzierungen des verknüpften Designs.",
  "ui.report_a_bug": "Fehler melden",
+  "ui.report_characters_left_one": "{count} Zeichen übrig",
+  "ui.report_characters_left_other": "{count} Zeichen übrig",
  "ui.reset": "Zurücksetzen",
  "ui.reset_all": "Alle zurücksetzen",
  "ui.reset_the_settings_on_this_page": "Einstellungen auf dieser Seite zurücksetzen",
@@ -5547,6 +5644,14 @@
  "values must be numbers or expressions": "Werte müssen Zahlen oder Ausdrücke sein",
  "view.auto_ortho_faces": "Perspektivisch beim Drehen, orthografisch auf Flächen",
  "view.render_inspector": "Render-Inspektor",
+  "view_gizmo.arrows": "Drehpfeile",
+  "view_gizmo.home": "Schaltfläche „Ausgangsansicht“",
+  "view_gizmo.no_such_body": "Diese Konstruktion hat keinen Körper mit diesem Namen.",
+  "view_gizmo.note": "Wählen Sie einen Körper in der Ansicht. Er wird mit Ihren Einstellungen und Einstellungsprofilen gespeichert und in jeder Konstruktion angezeigt. Klicken Sie auf eine seiner Flächen, um direkt darauf zu blicken.",
+  "view_gizmo.texture": "Textur",
+  "view_gizmo.themed": "Design",
+  "view_gizmo.too_detailed": "Zu detailliert für den Ansichtsnavigator (über 10.000 Dreiecke)",
+  "view_gizmo.too_thin": "Zu lang und dünn für den Ansichtsnavigator: Die dünnste Seite muss mindestens ein Fünftel der längsten sein",
  "web.files.insert_drawings_hint": "CAD-Dateien, Netze, DXF oder SVG in das geöffnete Design",
  "web.files.insert_stored_drawings_hint": "In das geöffnete Design (CAD-Dateien, Netze, DXF, SVG)",
  "web.open_full": "In SolidCraft öffnen",
@@ -22,8 +22,7 @@
  "cmd.component_cycle_color": "Cycle Component Colour",
  "cmd.construct_point_center": "Point At Centre Of Circle/Sphere/Torus",
  "cmd.inspect_center_of_mass": "Centre of Mass",
-  "cmd.inspect_colored_components": "Enable Component Colours",
-  "cmd.inspect_colored_components_disable": "Disable Component Colours",
+  "cmd.inspect_colored_components": "Component Colours",
  "cmd.parameters_favorite": "Favourite Parameter",
  "cmd.render_aging_describe": "Layered Surface Aging",
  "cmd.render_effects_describe": "Lens and Creative Effects",
@@ -69,6 +68,7 @@
  "help.solid.split_face": "Divides the selected faces along a plane, the face of another body or sketch curves, without cutting the body. Use it to give part of a face its own draft, colour or offset.",
  "help.third_party": "Third-party licences",
  "home.new_mm_hint": "Millimetres · opens in Design",
+  "measure.line_to_centre": "Line to centre",
  "navbar.custom.anchor.bottom_centre": "Bottom centre",
  "navbar.custom.anchor.top_centre": "Top centre",
  "navbar.custom.customise": "Customise navigation bar…",
@@ -86,6 +86,7 @@
  "prefs.max_file_size_web": "The web app opens STEP and import files up to 512 MB and designs up to 256 MB: a browser tab can't hold larger files. The desktop app can raise these limits.",
  "prefs.megabytes": "MB",
  "prefs.network_locations_note": "For organisations that keep designs on file servers. Off: only servers you allow.",
+  "prefs.select_hidden_edges_help": "Select edges through faces when Shaded with hidden edges is active, including for Fillet. Off keeps v0.30.1 selection behaviour. Hidden bodies stay unselectable.",
  "prefs.sketch.center_arc": "Centre-point arc follows the cursor",
  "prefs.sketch.conflict_colour": "Conflict colour",
  "prefs.sketch.tracking_guides": "Centre and midpoint guides",
@@ -234,6 +235,12 @@
  "render.studio_area_help": "Up to four one-sided rectangles. Orthogonal half-edges U and V define size; U × V faces the lit side. Coordinates are world-space millimetres.",
  "render.studio_center": "Centre X, Y, Z (mm)",
  "render.studio_hdr_help": "Radiance .hdr, 2:1 panorama, up to 2048 × 1024. EXR is unavailable. The colour assumption applies only when primaries are unspecified.",
+  "render.surface_import.complete": "Choose an image and enter its author, source and licence.",
+  "render.surface_import.license": "Licence / ownership",
+  "sketch.hint.arc.center_point": "Arc: click centre and start, go round either way and click the end, or type a signed sweep",
+  "sketch.hint.circle.center": "Circle: click the centre, then a point on the circle",
+  "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to centre the second on the first",
+  "sketch.hint.rectangle.center": "Centre rectangle: click the centre, then a corner",
  "sketch_text.align_center": "Centre",
  "ui.3d_mouse_kind_cap": "Return to Centre",
  "ui.3d_mouse_looks_like_cap": "The reading stays put while you hold it, the way a Return to Centre device does.",
@@ -261,6 +268,7 @@
  "ui.layout_compact": "Compact",
  "ui.layout_floating": "Floating",
  "ui.material_review.claims": "Sources and licences are unverified claims. Missing values remain unknown.",
+  "ui.organize": "Organise",
  "ui.point_cloud_color_by": "Colour By",
  "ui.point_cloud_file_colors": "File Colours",
  "ui.point_cloud_no_file_colors": "The file has no colours",
@@ -85,6 +85,7 @@
  "Bottom Right": "Bottom Right",
  "Boundary": "Boundary",
  "Bounding box": "Bounding box",
+  "Bridge": "Bridge",
  "CHECK": "CHECK",
  "COMPONENTS": "COMPONENTS",
  "CONFIGURATIONS": "CONFIGURATIONS",
@@ -628,6 +629,8 @@
  "Suppress Selected Folders": "Suppress Selected Folders",
  "Suppressed": "Suppressed",
  "Surface": "Surface",
+  "Surface or face": "Surface or face",
+  "Surface or faces": "Surface or faces",
  "Surface, or faces to turn over": "Surface, or faces to turn over",
  "Surfaces": "Surfaces",
  "Swap Ends": "Swap Ends",
@@ -641,6 +644,7 @@
  "Target": "Target",
  "Target Body": "Target Body",
  "Target Face (optional)": "Target Face (optional)",
+  "Target edges": "Target edges",
  "Tear": "Tear",
  "Technical details": "Technical details",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.",
@@ -648,6 +652,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "The direction must be an axis or a straight sketch curve that lies in the sketch plane",
  "The mirror line cannot also be mirrored": "The mirror line cannot also be mirrored",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "The mirror line must be a straight curve of this sketch, not an origin axis",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "The origin axis is perpendicular to the sketch plane, so it has no line in the plane",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "The saved author occurrence is missing. Select a valid author placement before rebinding.",
  "Then": "Then",
  "These features will be deleted:": "These features will be deleted:",
@@ -739,6 +744,9 @@
  "a picked edge's body is gone": "a picked edge's body is gone",
  "add a key for a joint first": "add a key for a joint first",
  "ai.connected_toast": "SolidCraft is now available in {clients}. Restart them to use it (Preferences > Assistant).",
+  "ai.http.allow": "Allow insecure HTTP",
+  "ai.http.confirm": "Allow for this endpoint",
+  "ai.http.warning": "The API key and conversation will be sent unencrypted. Anyone with access to the network may read or change them. Use this only on a network you trust.",
  "ai.prefs.allow_control": "Let AI agents connect",
  "ai.prefs.allow_control_note": "A local channel (MCP). Nothing leaves this computer.\n\nOpens a control channel on this computer only (127.0.0.1, port 27878 or the next free one). A program that connects must also show a secret token that only your user account can read, made fresh at every start. Takes effect the next time SolidCraft starts. Off: nothing listens unless you start SolidCraft with --control.",
  "ai.prefs.availability": "Availability",
@@ -750,6 +758,8 @@
  "ai.prefs.follow_camera": "Follow the camera",
  "ai.prefs.follow_camera_off": "Automatic camera following is off.",
  "ai.prefs.follow_camera_on": "The camera turns to face sketches the agent creates.",
+  "ai.prefs.instructions": "Custom instructions",
+  "ai.prefs.instructions_note": "Sent to the agent at the start of every chat, after SolidCraft's own instructions: how you like to work, rules to keep to. A change applies from the next chat (Connect or New chat).",
  "ai.prefs.intro": "AI agents in SolidCraft.",
  "ai.prefs.make_default": "Make default",
  "ai.prefs.no_agents": "No agents yet. Add an agent or refresh to find installed agents.",
@@ -963,8 +973,7 @@
  "cmd.inspect_analysis": "View Analysis",
  "cmd.inspect_center_of_mass": "Center of Mass",
  "cmd.inspect_clearance": "Clearance",
-  "cmd.inspect_colored_components": "Enable Component Colors",
-  "cmd.inspect_colored_components_disable": "Disable Component Colors",
+  "cmd.inspect_colored_components": "Component Colors",
  "cmd.inspect_compare": "Compare Bodies",
  "cmd.inspect_compare_picture": "Compare Picture",
  "cmd.inspect_continuity": "Continuity Analysis",
@@ -1081,6 +1090,9 @@
  "cmd.render.compare.divider": "Move Render Comparison Divider",
  "cmd.render.result.discard": "Discard Render Result",
  "cmd.render.result.select": "Select Render Result",
+  "cmd.render.surface.import": "Import Surface Maps",
+  "cmd.render.texture.list": "List Embedded Surface Images",
+  "cmd.render.texture.remove": "Remove Embedded Surface Image",
  "cmd.render_aging_describe": "Layered Surface Aging",
  "cmd.render_backends": "Render Backends",
  "cmd.render_batch": "Render All Shots",
@@ -1172,7 +1184,7 @@
  "cmd.sketch_arc_tangent": "Tangent Arc",
  "cmd.sketch_arc_three_point": "3-Point Arc",
  "cmd.sketch_auto_constrain": "AutoConstrain",
-  "cmd.sketch_auto_constrain_from_datum": "AutoConstrain from datum",
+  "cmd.sketch_auto_constrain_from_datum": "AutoConstrain from Datum",
  "cmd.sketch_auto_project": "Auto-Project Edges on Reference",
  "cmd.sketch_blend_curve": "Blend Curve",
  "cmd.sketch_cancel": "Cancel Sketch",
@@ -1186,7 +1198,7 @@
  "cmd.sketch_circle_two_point": "2-Point Circle",
  "cmd.sketch_circle_two_tangent": "2-Tangent Circle",
  "cmd.sketch_constrainer": "Sketch Constrainer",
-  "cmd.sketch_constraint_fix": "Fix/UnFix",
+  "cmd.sketch_constraint_fix": "Fix/Unfix",
  "cmd.sketch_constraint_midpoint": "MidPoint",
  "cmd.sketch_construction": "Normal/Construction",
  "cmd.sketch_copy": "Copy Sketch Entities",
@@ -1296,6 +1308,7 @@
  "cmd.timeline_stop": "Stop History",
  "cmd.timeline_suppress": "Suppress Feature",
  "cmd.ui.assistant": "Toggle Assistant",
+  "cmd.view.navigator": "Custom View Navigator",
  "cmd.view.render_browser": "Render Browser",
  "cmd.view.render_dock": "Move Render Dock",
  "cmd.view.render_focus": "Render Focus View",
@@ -1311,25 +1324,26 @@
  "cmd.view_front": "Front View",
  "cmd.view_graphics_preset": "Graphics Preset",
  "cmd.view_grid": "Grid",
-  "cmd.view_ground_shadow": "Ground shadow",
-  "cmd.view_home": "Home view",
+  "cmd.view_ground_shadow": "Ground Shadow",
+  "cmd.view_home": "Home View",
  "cmd.view_isometric": "Isometric View",
  "cmd.view_left": "Left View",
  "cmd.view_list": "List Named Views",
  "cmd.view_navigate": "Navigate View",
-  "cmd.view_navigation_bar": "Navigation bar",
+  "cmd.view_navigation_bar": "Navigation Bar",
  "cmd.view_next_tab": "Next Tab",
  "cmd.view_normal_to": "Normal to Selection",
  "cmd.view_previous_tab": "Previous Tab",
  "cmd.view_rename": "Rename Named View",
  "cmd.view_render_frame": "Render Frame Guides",
+  "cmd.view_ribbon_tabs_only": "Ribbon Tabs Only",
  "cmd.view_right": "Right View",
  "cmd.view_save": "New Named View",
  "cmd.view_shots_strip": "Shots Strip",
-  "cmd.view_spin": "Continuous orbit",
-  "cmd.view_tool": "Navigation tool",
+  "cmd.view_spin": "Continuous Orbit",
+  "cmd.view_tool": "Navigation Tool",
  "cmd.view_top": "Top View",
-  "cmd.view_visual_style": "Visual style",
+  "cmd.view_visual_style": "Visual Style",
  "color.blue": "Blue",
  "color.copy": "Click to copy color values",
  "color.edit": "Click to edit color",
@@ -1394,15 +1408,22 @@
  "dialog.computing": "Computing… {seconds} s",
  "dialog.could_not_be_checked": "could not be checked",
  "dialog.custom_axis": "↖ Custom Axis",
+  "dialog.cylinder_face_tip": "The face or vertex of the model the cylinder stands on: click here, then click it in the view. Left empty, X, Y and Z place it.",
  "dialog.dimension_insert_hint": "Click another driving dimension to insert its name",
  "dialog.dimension_name": "Dimension: {name}",
+  "dialog.dimension_step_down": "Down by {step}",
+  "dialog.dimension_step_expression": "Only a number steps; an expression stays as typed",
+  "dialog.dimension_step_up": "Up by {step}",
  "dialog.edit_title": "EDIT {title}",
  "dialog.no_shown_body": "No shown body to change: show one, or choose New Body",
  "dialog.pattern_sketch_not_object": "Pick bodies or features: a sketch is neither. Repeat its curves with the sketch's own Pattern or Mirror, or extrude it first.",
+  "dialog.primitive_point_tip": "A point that fills X, Y and Z: click here, then click a vertex, edge or face of the model, a point of a sketch, or the origin.",
+  "dialog.reference_edge_tip": "A straight edge of the picked face to measure the distance below from: click here, then click the edge.",
  "dialog.select": "↖ Select",
  "dialog.selected_count": "↖ {count} selected",
  "dialog.selection_constraint": "Constraint {id}",
  "dialog.selection_external_curve": "{sketch} · curve {id}",
+  "dialog.selection_external_point": "{point} · {sketch}",
  "dialog.selection_guidance": "Select an input to change it. Click selected objects to remove them; Ctrl/Cmd-click also toggles them. Review the preview, then press OK.",
  "dialog.selection_midpoint": "Midpoint · {id}",
  "dialog.selection_profile": "{sketch} · profile {number}",
@@ -1420,6 +1441,7 @@
  "document.read_only_save": "This design was opened read-only: save it as a new file",
  "document.save_changes": "Save changes to {name}?",
  "document.save_copy": "Save a Copy…",
+  "document.tab_unsaved_changes": "Unsaved changes",
  "document.unsaved_changes": "{name} has unsaved changes. If you don't save, they are lost.",
  "drive.rigid": "{joint} is a rigid joint: it holds its parts still, so it has nothing to drive. To let them move, change its type in Edit Joint: Revolute to rotate, Slider to slide, Cylindrical for both.",
  "drive.stopped_by_contact": "Stopped at {value}: {a} would pass through {b}",
@@ -1440,10 +1462,16 @@
  "each rail's curves must be in one sketch": "each rail's curves must be in one sketch",
  "feature computation ended without a result": "feature computation ended without a result",
  "file.open.drawing_filter": "Designs, CAD files, meshes and drawings",
+  "file.open.portal_fallback.no_portal_service": "The file chooser that opened is not the desktop's own: the desktop portal service is not available.",
+  "file.open.portal_fallback.no_session_bus": "The file chooser that opened is not the desktop's own: there is no D-Bus session bus.",
+  "file.open.portal_fallback.xwayland": "The file chooser that opened is not the desktop's own: under XWayland the portal refuses the parent window.",
  "file_load.built": "Built so far: {built} of {total} features.",
  "file_load.converting": "Converting solid {done} of {total}",
+  "file_load.inserted": "Inserted {name}",
  "file_load.inserting": "Inserting geometry",
  "file_load.link_item": "{name} ({done} of {total})",
+  "file_load.opened": "Opened {name}",
+  "file_load.opened_in_tab": "Opened {name} in a new tab",
  "file_load.opening": "Opening design",
  "file_load.preparing_thumbnail": "Preparing the thumbnail...",
  "file_load.preparing_view": "Preparing the view...",
@@ -1600,7 +1628,7 @@
  "help.parts.resize": "Changes the size or length of an inserted standard part and rebuilds it; its joints keep it seated. Use it when a screw turns out too long or a hole needs another size.",
  "help.plastic.assign_rule": "Assigns a plastic rule to bodies, so their plastic features take its draft and clearance as defaults. Use it to set up a moulded part once for all its features.",
  "help.plastic.boss": "Adds a screw boss on a face: a post with an optional hole, draft, root fillet and supporting ribs. Use it for screw points in moulded or printed housings.",
-  "help.plastic.lip": "Adds a lip or a matching groove along the rim of a shelled body. Use it so that two housing halves locate on each other and close tightly.",
+  "help.plastic.lip": "Adds a lip or a matching groove along the rim of a shelled body (Shell a face open first, then pick the rim around that opening). Use it so that two housing halves locate on each other and close tightly.",
  "help.plastic.manage_rules": "Creates and edits plastic rules: material, wall thickness, radii, clearance and draft. Use them to keep the features of a moulded part consistent.",
  "help.plastic.rest": "Adds a rest on a face: a round or rectangular pad, solid or hollow, with draft. Use it as a support or standoff in a moulded housing.",
  "help.plastic.snap_fit": "Adds a snap-fit hook on a face, with its length, thickness and catch. Use it to clip parts together without screws.",
@@ -1679,7 +1707,7 @@
  "help.sketch.insert_svg": "Reads the paths of an SVG drawing into a sketch, scaled, turned and placed where you set. Use it to turn a logo or vector outline into curves you can extrude.",
  "help.sketch.inspect": "Opens a report on the open sketch: how many degrees of freedom are left and whether it is fully constrained. Use it to find out what still moves before you finish the sketch.",
  "help.sketch.intersect": "Adds the curves or points where bodies, faces, edges or other sketches cross the sketch plane. They stay linked and follow the model when it changes.",
-  "help.sketch.intersection_curve": "Creates 3D curves where two bodies or faces meet, linked to them. Use them as paths or guide rails that follow the model.",
+  "help.sketch.intersection_curve": "Creates 3D curves where two bodies, faces or curves of other sketches meet, linked to them. Use them as paths or guide rails that follow the model.",
  "help.sketch.isoparametric_curve": "Creates a 3D curve along a face's U or V direction through a point you pick, linked to the face. Use it as a path or split line that follows the surface.",
  "help.sketch.line": "Draws connected lines point by point, as an open chain or a closed outline. It is the basic tool for most profiles.",
  "help.sketch.line.midpoint": "Draws a line from its midpoint out to one end, with the other end mirrored. Use it for lines centred on a point, such as a symmetric edge.",
@@ -1785,6 +1813,7 @@
  "help.view.navigate": "Turns, pans or zooms the view by steps, such as a quarter turn left. Use it to move the camera precisely instead of dragging.",
  "help.view.navigation_bar": "Shows or hides the navigation bar at the bottom of the viewport. Hide it for more room, show it to reach the view tools by mouse.",
  "help.view.rename": "Gives a saved named view a new name. The view itself stays the same.",
+  "help.view.ribbon_tabs_only": "Folds the ribbon to its tab row, so the view gets the room its panels took. Click a tab to show its panels over the view; choose this again to keep the whole ribbon shown.",
  "help.view.save": "Saves the current camera position as a named view in the design. Use it to come back to the same angle later, for example for screenshots.",
  "help.view.spin": "Orbits the view around the model continuously until the next click or key. Use it to present a model from all sides.",
  "help.view.tool": "Latches a camera tool, orbit, pan or zoom, so that dragging with the left mouse button moves the view until you switch it off. Use it on a trackpad or without a middle mouse button.",
@@ -1999,6 +2028,7 @@
  "material.selection.mixed": "Different materials",
  "measure.at": "At",
  "measure.item": "Item {number}",
+  "measure.line_to_centre": "Line to center",
  "measure.quick_copied": "Measurement copied",
  "measure.quick_copy": "Click to copy the measurement",
  "measure.quick_edges": "{count} edges",
@@ -2029,6 +2059,8 @@
  "nav.blender.help": "Middle drag orbits, Shift+middle pans, Ctrl+middle zooms; right drag leaves the camera alone",
  "nav.creo.help": "Middle drag orbits, Shift+middle pans, Ctrl+middle drag vertically zooms (down to zoom in); scroll the wheel to zoom",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "A middle or right drag goes on orbiting, panning or zooming as it began until the button is released, whatever keys are pressed or let go meanwhile. Off: the keys held decide at every moment of the drag.",
+  "nav.drag_keeps_mode.label": "A drag keeps the navigation it started with",
  "nav.free_orbit.help": "Mouse and 3D mouse rotate through both poles and preserve roll. Shift axis snapping is disabled.",
  "nav.free_orbit.label": "Free orbit",
  "nav.free_orbit.snap_help": "Mouse and 3D mouse rotate through both poles and preserve roll. Hold Shift during an orbit drag to snap the view direction and roll.",
@@ -2265,6 +2297,17 @@
  "prefs.auto_operation_note": "Join, New Body or Cut, from what the material touches.",
  "prefs.axes": "Axes",
  "prefs.axis": "Axis",
+  "prefs.background_choose": "Choose picture…",
+  "prefs.background_image": "Picture",
+  "prefs.background_unreadable": "Could not read the background picture",
+  "prefs.blur_cost": "Relative rendering cost. More bars usually mean more work.",
+  "prefs.blur_device": "Unavailable on this graphics device or rendering path",
+  "prefs.blur_guard": "Blur quality was reduced to keep frames responsive. The radius is unchanged.",
+  "prefs.blur_off": "Off",
+  "prefs.blur_reduce_transparency": "Disabled by the system's Reduce transparency setting",
+  "prefs.blur_software": "Unavailable with software graphics (gpu-software)",
+  "prefs.blur_source": "Unavailable in this workspace view",
+  "prefs.blur_web": "Unavailable on this web rendering path",
  "prefs.bodies_folders": "Bodies folders",
  "prefs.bodies_folders_always": "Always",
  "prefs.bodies_folders_never": "Never",
@@ -2278,6 +2321,8 @@
  "prefs.browser_eye_left": "Eye beside the fold arrow",
  "prefs.browser_eye_left_note": "Browser rows show their show/hide eye next to the fold arrow, as before, instead of in a column at the right end of the rows.",
  "prefs.browser_reveal_on_hover": "Reveal on hover",
+  "prefs.browser_rows_start_closed": "Browser rows start closed",
+  "prefs.browser_rows_start_closed_note": "Placements and folders in the Browser start closed, so a design with many components shows its top-level rows. Each opens with its arrow, Expand All or Find in Browser, which opens just the rows down to its body and closes again the ones the last find opened. A body picked in the 3D view leaves the Browser as it is. When off, folders start open, placements start as Components start open says, and a pick in the 3D view opens the Browser down to its body, as before.",
  "prefs.browser_show_note": "Shown keeps the browser on screen. Reveal on hover keeps it out of sight until the pointer comes over its place or the thin tab at its left edge, and it stays open while the pointer is inside it or a menu from it is open.",
  "prefs.browser_shown": "Shown",
  "prefs.built_in": "Built in",
@@ -2288,6 +2333,7 @@
  "prefs.carousel_previous": "Previous",
  "prefs.choose_font": "Choose font file…",
  "prefs.click": "Click",
+  "prefs.command_dialog_values": "Command dialogs",
  "prefs.contact_shading": "Soft contact shading",
  "prefs.contact_shading_note": "Soft shading where parts come close.",
  "prefs.context_menu": "Context menu",
@@ -2323,6 +2369,13 @@
  "prefs.dialogs_edge": "At the view's edge",
  "prefs.dialogs_left_column": "In the left column",
  "prefs.dialogs_note": "Where command dialogs open: docked at the view's edge, or in the left column in place of the browser and the History, which come back as they were when the dialog closes.",
+  "prefs.dimension_step_angle": "What the window's arrows, Up/Down and the wheel add to an angle",
+  "prefs.dimension_step_length": "What the window's arrows, Up/Down and the wheel add to a length",
+  "prefs.dimension_steps": "Window steps",
+  "prefs.dimension_values": "Dimension values",
+  "prefs.dimension_values_note": "Where you type a dimension's value. A window has arrows that step it; the Dimension tool places the text first.",
+  "prefs.dimension_values_view": "In the view",
+  "prefs.dimension_values_window": "In a window",
  "prefs.display": "Display",
  "prefs.edges": "Edges and shading",
  "prefs.extend": "Extend",
@@ -2376,6 +2429,8 @@
  "prefs.graphics_page.surfaces_edges": "Surfaces and edges",
  "prefs.graphics_page.view_bar": "Also in the view bar",
  "prefs.graphics_presets_note": "Presets set the choices below together.",
+  "prefs.ground_shadow_follows_model": "Ground shadow follows the model",
+  "prefs.ground_shadow_follows_model_help": "Place the shadow below the lowest visible body. When off, raised models keep their shadow on the origin ground plane.",
  "prefs.hide_constraint_glyphs_zoomed_out": "Hide constraint glyphs when zoomed out",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "Constraint glyphs leave the view when the sketch is zoomed out far enough that they would clutter it. Off: they stay at a fixed screen size at every zoom.",
  "prefs.history": "History",
@@ -2402,6 +2457,10 @@
  "prefs.invert_curved_roll_arrows_note": "The two curved arrows at the cube's corner roll the view within the screen plane. On: the clockwise arrow rolls counterclockwise and the counterclockwise arrow rolls clockwise. Off: each arrow rolls the view the way it curls.",
  "prefs.invert_navigator_arrows": "Invert the view cube rotation arrows",
  "prefs.invert_navigator_arrows_note": "The arrows around the cube orbit the camera the way they point, as in Fusion and Inventor: the arrow on the left points right and swings the camera right. Off: an arrow rotates the cube toward the side it sits on, so the left arrow swings the camera left. The curved roll arrows are not affected.",
+  "prefs.keep_unsaved_also_asks": "Still ask when the tab closes",
+  "prefs.keep_unsaved_also_asks_tip": "With this off, the tab closes without the browser's box once every unsaved design's copy is current.",
+  "prefs.keep_unsaved_in_browser": "Keep unsaved work in this browser",
+  "prefs.keep_unsaved_in_browser_tip": "Each open design's unsaved changes are kept up to date in this browser's private storage. The next visit offers to restore them.",
  "prefs.keep_work_on_tab_switch": "Keep dialogs and tools open when switching designs",
  "prefs.keep_work_on_tab_switch_note": "Each design tab keeps its open dialog or tool, with what you picked and typed in it, and its toolbar tab. They are there again when you come back to the design. Off: switching designs cancels them and shows the Model tab.",
  "prefs.labels": "Labels",
@@ -2413,6 +2472,8 @@
  "prefs.layout_page.card": "Card",
  "prefs.layout_page.column": "Column",
  "prefs.layout_page.hover": "Hover",
+  "prefs.layout_page.hover_panel_menus": "Switch panel menus on hover",
+  "prefs.layout_page.hover_panel_menus_help": "Click a ribbon panel name to open its menu. Hover another panel name to switch. Move outside the ribbon and open menu to close it.",
  "prefs.layout_page.icons_labels": "Icons + labels",
  "prefs.layout_page.ok_cancel": "OK and Cancel",
  "prefs.layout_page.on_hover": "On hover",
@@ -2515,6 +2576,8 @@
  "prefs.quality_smoother": "smoother",
  "prefs.quick_measure": "Quick measurement in the view's corner",
  "prefs.quick_measure_note": "The selection's size in the view's bottom right corner: an edge's length, or Ø and R for a round one, a face's area, a point's position, two items' distance and angle, several edges' or faces' total. A click copies it.",
+  "prefs.remember_dialog_values": "Remember command dialog values",
+  "prefs.remember_dialog_values.help": "Off by default. When on, after a command succeeds, its safe values and options are reused the next time you open the same command, until SolidCraft closes.",
  "prefs.render_previous_geometry_budget": "Use previous Render preview geometry budget",
  "prefs.render_previous_geometry_budget_help": "Restore the previous fixed geometry limit (512 MiB on 64-bit desktop, 128 MiB elsewhere) instead of the device-based budget.",
  "prefs.reports_saved": "{n} saved",
@@ -2523,6 +2586,8 @@
  "prefs.ribbon_click_ends_tool_note": "A click on the lit ribbon button of the sketch tool in use ends the tool, so clicks in the view select again. Off: the click starts the tool again.",
  "prefs.ribbon_reveal": "Show search results in the ribbon",
  "prefs.ribbon_reveal_note": "Hovering a result in Search commands shows where the command sits in the ribbon: its tab, its button or its row in a panel's drop-down. A command started from the search blinks there, and a running command from a drop-down marks its panel.",
+  "prefs.ribbon_tabs_only": "Show only the ribbon's tabs",
+  "prefs.ribbon_tabs_only_note": "The ribbon folds to its tab row. Clicking a tab shows its panels over the view until a command starts or the pointer leaves them. Ribbon Tabs Only in the View tab, or its shortcut, switches this.",
  "prefs.right_click": "Right click",
  "prefs.saving": "Start and save",
  "prefs.scale_note": "Also Ctrl + / Ctrl − in the window. Buttons are 28 px at 100%.",
@@ -2533,6 +2598,8 @@
  "prefs.section_hatch_by_part": "By part",
  "prefs.section_hatch_one": "One style",
  "prefs.select": "Select",
+  "prefs.select_hidden_edges": "Select hidden edges in Shaded with hidden edges",
+  "prefs.select_hidden_edges_help": "Select edges through faces when Shaded with hidden edges is active, including for Fillet. Off keeps v0.30.1 selection behavior. Hidden bodies stay unselectable.",
  "prefs.select_one_item": "Select one item",
  "prefs.select_other_hidden": "Select hidden geometry with Select Other",
  "prefs.select_other_hidden_help": "On: include hidden bodies, sketches and occluded edges near the pointer. Off: use the original list of visible geometry under the pointer.",
@@ -2557,6 +2624,8 @@
  "prefs.sketch.click_selects": "Click selects",
  "prefs.sketch.conflict_colour": "Conflict color",
  "prefs.sketch.drawing": "Drawing",
+  "prefs.sketch.ellipse_axes": "Draw ellipses with their axes",
+  "prefs.sketch.ellipse_axes_note": "The major and minor axes as construction lines, so the half-axes and axes can be dimensioned. Off: the ellipse alone, and D on it gives its minor radius wherever the value is pulled, drawn and labelled R as before.",
  "prefs.sketch.exit_keep": "Keep",
  "prefs.sketch.exit_previous": "Return to the view before",
  "prefs.sketch.exit_unless_rotated": "Unless turned",
@@ -2650,6 +2719,10 @@
  "prefs.theme_follow_off": "Off",
  "prefs.theme_follow_stop": "Stop following",
  "prefs.theme_import_hint": "Click to choose a theme file, drop one here, or press Ctrl+V (Cmd+V on a Mac) with a theme copied",
+  "prefs.theme_notice_dismiss": "Dismiss",
+  "prefs.theme_option_blur": "Blur behind panels",
+  "prefs.theme_option_blur_help": "Blur behind translucent panels, in physical pixels. Zero is off.",
+  "prefs.theme_option_invalid": "Saved value for {option} is invalid; using the theme default. The saved value is kept.",
  "prefs.theme_option_opacity": "Opacity",
  "prefs.theme_option_opacity_help": "Adjust floating panel opacity. A readability floor protects text over viewport colors.",
  "prefs.theme_option_tab_colours": "Tab colors",
@@ -2658,6 +2731,7 @@
  "prefs.theme_option_tab_fade_ms_help": "Fade panel and viewport colors when switching tabs. Zero switches instantly.",
  "prefs.theme_options_badge": "Options",
  "prefs.theme_options_more": "More · {count}",
+  "prefs.theme_options_newer": "This theme requires a newer SolidCraft. Upgrade, then reimport the original theme to recover its option definitions.",
  "prefs.theme_options_reset": "Reset",
  "prefs.theme_options_unavailable": "Unavailable on this device",
  "prefs.theme_paste": "Paste theme",
@@ -2721,6 +2795,12 @@
  "recovery.just_now": "just now",
  "recovery.min_ago": "{count} min ago",
  "recovery.never_saved": "never saved",
+  "recovery.open_saved": "Open saved version",
+  "recovery.restore": "Restore",
+  "recovery.restore_intro": "Changes that weren't saved when this page last closed are kept in this browser.",
+  "recovery.restore_row": "{name}, changed {when}",
+  "recovery.restore_title": "Restore unsaved designs?",
+  "recovery.restore_title_one": "Restore unsaved design: {name}, changed {when}?",
  "refused.change": "Couldn't change {body}.",
  "refused.cut": "Couldn't cut {body}.",
  "refused.face_curved": "One of its curved faces can't be used for modelling.",
@@ -3242,9 +3322,11 @@
  "render.frame_wide": "16:9 · Widescreen",
  "render.gpu_depth": "Maximum path depth",
  "render.gpu_options_help": "Samples, depth, seed and exposure are saved with this setup. Only the active image method is saved.",
+  "render.gpu_path_crashed": "SolidCraft closed while setting it up on this graphics adapter last time, most likely inside the graphics driver, so it is not set up again by itself. Choose CPU ray tracing instead, or try again (a driver update also tries again).",
  "render.gpu_path_failed": "GPU path tracer unavailable",
  "render.gpu_path_first_setup": "The first setup on this GPU can take several minutes; SolidCraft stays usable meanwhile. Later starts reuse the compiled shaders where the driver keeps them.",
  "render.gpu_path_preparing": "GPU path tracer: compiling shaders…",
+  "render.gpu_path_retry": "Try again",
  "render.gpu_seed": "Random seed",
  "render.gpu_unavailable": "GPU path tracing is not ready on this device.",
  "render.ground_apply": "Fit and save ground",
@@ -3858,6 +3940,7 @@
  "render.stage_panels.extent": "Extent",
  "render.stage_panels.fit_save": "Fit and save",
  "render.stage_panels.gpu_required": "Needs GPU path tracing",
+  "render.stage_panels.grain_angle": "Grain angle",
  "render.stage_panels.keep": "Keep",
  "render.stage_panels.kept": "Kept",
  "render.stage_panels.kept_fields": "Camera, sampling, dimensions, optical bindings, CAD geometry and engineering properties.",
@@ -3976,6 +4059,19 @@
  "render.subsurface_enable": "Interior scattering random walk",
  "render.subsurface_help": "Closed dielectric only. Scattering and RGB absorption are separate per-mm coefficients. Paths scatter inside actual geometry, then refract or reflect at the boundary. Disable straight shadow transmission, surface denoising and exterior volume; use one Fresnel stratum. Not a diffusion shader, density grid or measured material. Dense media may need more samples and path depth.",
  "render.subsurface_rate": "Scattering collision rate",
+  "render.surface_import.author": "Author",
+  "render.surface_import.busy": "Importing image…",
+  "render.surface_import.complete": "Choose an image and enter its author, source and license.",
+  "render.surface_import.embedded": "Imported image",
+  "render.surface_import.failed": "The image import did not finish.",
+  "render.surface_import.license": "License / ownership",
+  "render.surface_import.raytrace_required": "Images require CPU or GPU ray tracing. Choose it in Output.",
+  "render.surface_import.repeat_u": "Repeat U",
+  "render.surface_import.repeat_v": "Repeat V",
+  "render.surface_import.save": "Save image on body",
+  "render.surface_import.saved_cpu": "Save maps to use them with CPU rendering.",
+  "render.surface_import.source": "Source",
+  "render.surface_import.title": "Import image",
  "render.tone_aces_fitted": "ACES fitted",
  "render.tone_reinhard": "Reinhard",
  "render.transmission_scope": "GPU glass supports certified disjoint media. Unrestricted nested media and a noise-free transmission estimator are not provided.",
@@ -4052,6 +4148,8 @@
  "sample.plate.name": "Sample Plate",
  "sample.vents.about": "Slots in a rectangular pattern: rows, columns and pitch are parameters",
  "sample.vents.name": "Vent Plate",
+  "scale.per_axis": "Per axis",
+  "scale.uniform": "Uniform",
  "search.command_keys": "Enter run     Shift+Enter run and keep open     Esc close",
  "search.commands": "Commands",
  "search.design": "In this design",
@@ -4142,6 +4240,32 @@
  "sketch.dof_left": "{count} degrees of freedom left",
  "sketch.dof_left_one": "{count} degree of freedom left",
  "sketch.draw_curves": "Draw as {linetype}",
+  "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+  "sketch.error.nothing_to_break": "nothing to break here",
+  "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+  "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+  "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+  "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+  "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+  "sketch.hint.break": "Break: click a curve where it should split",
+  "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+  "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+  "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+  "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+  "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+  "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+  "sketch.hint.fallback": "Click in the sketch",
+  "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+  "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+  "sketch.hint.open_done": "Open done",
+  "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+  "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+  "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+  "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+  "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+  "sketch.hint.slot": "Slot: click both ends, then the width",
+  "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+  "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
  "sketch.make_selection": "Convert the selection to {linetype}",
  "sketch.open_ends": "Open {count}",
  "sketch.status_conflict": "constraints conflict",
@@ -4363,6 +4487,7 @@
  "ui.3d_sketch": "3D Sketch",
  "ui.activate": "Activate",
  "ui.active_component": "Active component",
+  "ui.addToQuickAccess": "Add to Quick Access",
  "ui.add_configuration": "Add configuration",
  "ui.add_parameter": "Add parameter",
  "ui.agent_chat": "Agent chat",
@@ -4697,6 +4822,7 @@
  "ui.click_selects_whole_bodies": "Click selects whole bodies",
  "ui.click_then_press_key": "Click, then press the new key",
  "ui.close": "Close",
+  "ui.close_tab": "Close tab",
  "ui.coil": "Coil",
  "ui.coincident": "Coincident",
  "ui.collapse": "Collapse",
@@ -4784,6 +4910,7 @@
  "ui.default_modelling_orientation": "Default modeling orientation",
  "ui.delete": "Delete",
  "ui.delete_select_first": "Select what to delete first: features, bodies, components or sketch geometry",
+  "ui.dependents_select_first": "Select what to list the dependents of first",
  "ui.depth": "Depth",
  "ui.design": "Design",
  "ui.design_properties.author": "Author",
@@ -4913,6 +5040,11 @@
  "ui.factor": "Factor",
  "ui.fade": "Fade",
  "ui.fade_length": "Fade Length",
+  "ui.fair_iterations": "Iterations",
+  "ui.fair_keep_edges": "Keep edges",
+  "ui.fair_strength": "Strength",
+  "ui.fair_surface_title": "FAIR SURFACE",
+  "ui.fair_tolerance_default": "0.001 of body size",
  "ui.feature_history": "Feature history",
  "ui.feature_options": "Feature Options",
  "ui.features": "Features",
@@ -4941,6 +5073,10 @@
  "ui.fillet_setback_least": "More than {least}",
  "ui.fillet_setback_tip": "Where the smooth corner patch starts: how far along each edge from the corner. The default is {factor} × the radius. It must be more than the least setback, where the rounds meet without one: the radius where the faces are square to each other.",
  "ui.fillet_smooth_radius": "Smooth radius change",
+  "ui.fillet_turn": "Turns",
+  "ui.fillet_turn_mitre": "Mitre",
+  "ui.fillet_turn_swept": "Swept",
+  "ui.fillet_turn_tip": "Where two rounds turn round a sharp corner edge between them, such as the rounds along a boss's base at its upright edges.\nMitre: the rounds run on until they meet in a mitre.\nSwept: the rounds stop at the corner edge and turn round it, the corner a torus tangent to both. Only for rounds of one radius round a straight, convex corner edge.",
  "ui.fillet_type_choices_tip": "Constant radius: one radius all along the edge.\nChord length: the width across the round stays the same, whatever angle the faces meet at.\nVariable radius: a radius at each end, and more along the edge if you add them.\nCurvature continuous: a section without a kink in reflections where it meets flat faces (G2).\nSpline: the radius along the edge follows control radii you set.",
  "ui.fillet_type_curvature": "Curvature continuous",
  "ui.fillet_type_tip": "The section across the edge. Curvature continuous: a curvature-continuous (G2) section between planar faces, so reflections run from the faces into the round without a kink.",
@@ -4986,6 +5122,7 @@
  "ui.heading_construct": "CONSTRUCT",
  "ui.heading_create": "CREATE",
  "ui.heading_create_sketch": "CREATE SKETCH",
+  "ui.heading_custom_view_navigator": "CUSTOM VIEW NAVIGATOR",
  "ui.heading_cylinder": "CYLINDER",
  "ui.heading_design": "DESIGN",
  "ui.heading_draft": "DRAFT",
@@ -5093,6 +5230,7 @@
  "ui.inspect": "Inspect",
  "ui.instances": "Instances",
  "ui.intersect": "Intersect",
+  "ui.intersection_curve_second_pick": "Intersection curve: click the second face or curve (right-click to start over)",
  "ui.iso_4753": "ISO 4753",
  "ui.isolate": "Isolate",
  "ui.join": "Join",
@@ -5121,6 +5259,7 @@
  "ui.manipulator_free_alt": "Manipulator free drag also on Alt/Option",
  "ui.manipulator_free_alt_tip": "On: Alt/Option or Ctrl/Cmd on extrude / gizmo arrows disables value snapping. Off: Ctrl/Cmd only.",
  "ui.manufacture": "Manufacture",
+  "ui.match_surface_title": "MATCH SURFACE",
  "ui.material_review.axes": "Material-local axes; no body orientation is assigned.",
  "ui.material_review.claims": "Sources and licenses are unverified claims. Missing values remain unknown.",
  "ui.material_review.compressive_strength": "Compressive strength",
@@ -5143,6 +5282,9 @@
  "ui.material_review.title": "Review Physical Material Data",
  "ui.material_review.unknown": "Unknown",
  "ui.material_review.yield_strength": "Yield strength",
+  "ui.mcp_agents": "Agents through MCP",
+  "ui.mcp_compact": "Compact output",
+  "ui.mcp_compact_note": "For agents connected through the MCP server (solidcraft-cli mcp): inspect_design summarises sketches and tool results are not pretty-printed, so they use fewer tokens. Applies to agent sessions started after the change; --compact or SOLIDCRAFT_MCP_COMPACT=1 also turn it on.",
  "ui.measure": "Measure",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "3MF with face tags",
@@ -5184,6 +5326,7 @@
  "ui.options": "Options",
  "ui.orbit": "Orbit",
  "ui.orbit_around": "Orbit around",
+  "ui.organize": "Organize",
  "ui.orientation": "Orientation",
  "ui.origin": "Origin",
  "ui.palette_construction_mode": "Construction mode (X)",
@@ -5228,6 +5371,7 @@
  "ui.point_cloud_add_filter": "Add filter…",
  "ui.point_cloud_auto_range": "Automatic Range",
  "ui.point_cloud_color_by": "Color By",
+  "ui.point_cloud_dots": "Dots",
  "ui.point_cloud_file_colors": "File Colors",
  "ui.point_cloud_filter_by": "Filter by",
  "ui.point_cloud_height_high": "Highest",
@@ -5272,6 +5416,7 @@
  "ui.quality": "Quality",
  "ui.quantity": "Quantity",
  "ui.quantity_2": "Quantity 2",
+  "ui.quick_access_full": "The quick-access bar holds {count} commands; remove one to add another",
  "ui.quit": "Quit",
  "ui.radial_context_menu": "Radial context menu",
  "ui.radius": "Radius",
@@ -5289,6 +5434,7 @@
  "ui.relink_not_linked": "This component is not linked to a source design.",
  "ui.relink_select_one": "Select one linked component or one of its instances first.",
  "ui.relink_source_all": "Relink Source (All Instances)…",
+  "ui.removeFromQuickAccess": "Remove from Quick Access",
  "ui.removeFromToolbar": "Remove from Toolbar",
  "ui.removeSection": "Remove Section",
  "ui.render": "Render",
@@ -5297,6 +5443,8 @@
  "ui.repeat_nothing": "Nothing to repeat yet: start a tool or dialog first.",
  "ui.replace_with_link_done": "The copies are now placements of the linked design.",
  "ui.report_a_bug": "Report a bug",
+  "ui.report_characters_left_one": "{count} character left",
+  "ui.report_characters_left_other": "{count} characters left",
  "ui.reset": "Reset",
  "ui.reset_all": "Reset All",
  "ui.reset_the_settings_on_this_page": "Reset the settings on this page",
@@ -5581,6 +5729,14 @@
  "values must be numbers or expressions": "values must be numbers or expressions",
  "view.auto_ortho_faces": "Perspective while orbiting, ortho on faces",
  "view.render_inspector": "Render Inspector",
+  "view_gizmo.arrows": "Rotation arrows",
+  "view_gizmo.home": "Home button",
+  "view_gizmo.no_such_body": "This design has no body of that name.",
+  "view_gizmo.note": "Pick a body in the view. It is kept with your preferences and settings profiles, and shown in every design. Click one of its faces to look straight at it.",
+  "view_gizmo.texture": "Texture",
+  "view_gizmo.themed": "Themed",
+  "view_gizmo.too_detailed": "Too detailed for the view navigator (over 10,000 triangles)",
+  "view_gizmo.too_thin": "Too long and thin for the view navigator: its thinnest side must be at least a fifth of its longest",
  "web.files.insert_drawings_hint": "CAD files, meshes, DXF or SVG into the open design",
  "web.files.insert_stored_drawings_hint": "Into the open design (CAD files, meshes, DXF, SVG)",
  "web.open_full": "Open in SolidCraft",
@@ -956,8 +956,6 @@
  "cmd.inspect_accessibility": "Analyse d'accessibilité",
  "cmd.inspect_center_of_mass": "Centre de gravité",
  "cmd.inspect_clearance": "Jeu",
-  "cmd.inspect_colored_components": "Activer les couleurs des composants",
-  "cmd.inspect_colored_components_disable": "Désactiver les couleurs des composants",
  "cmd.inspect_compare": "Comparer les corps",
  "cmd.inspect_compare_picture": "Comparer les images",
  "cmd.inspect_continuity": "Analyse de continuité",
@@ -1365,11 +1363,14 @@
  "dialog.computing": "Calcul… {seconds} s",
  "dialog.could_not_be_checked": "non vérifiable",
  "dialog.custom_axis": "↖ Axe personnalisé",
+  "dialog.cylinder_face_tip": "La face ou le sommet du modèle sur lequel le cylindre est posé : cliquer ici, puis dessus dans la vue. Laissé vide, X, Y et Z le placent.",
  "dialog.dimension_insert_hint": "Double-cliquez sur une autre cote pilotante pour insérer son nom",
  "dialog.dimension_name": "Cote : {name}",
  "dialog.edit_title": "MODIFIER {title}",
  "dialog.no_shown_body": "Aucun corps affiché à modifier : affichez-en un ou choisissez Nouveau corps",
  "dialog.pattern_sketch_not_object": "Choisissez des corps ou des fonctions : une esquisse n'est ni l'un ni l'autre. Répétez ses courbes avec la Répétition ou la Symétrie de l'esquisse, ou extrudez-la d'abord.",
+  "dialog.primitive_point_tip": "Un point qui remplit X, Y et Z : cliquer ici, puis sur un sommet, une arête ou une face du modèle, sur un point d'une esquisse ou sur l'origine.",
+  "dialog.reference_edge_tip": "Une arête droite de la face choisie, depuis laquelle la distance ci-dessous est mesurée : cliquer ici, puis sur l'arête.",
  "dialog.select": "↖ Sélectionner",
  "dialog.selected_count": "↖ {count} sélectionné(s)",
  "dialog.selection_constraint": "Contrainte {id}",
@@ -1391,6 +1392,7 @@
  "document.read_only_save": "Cette conception a été ouverte en lecture seule : enregistrez-la dans un nouveau fichier",
  "document.save_changes": "Enregistrer les modifications de {name} ?",
  "document.save_copy": "Enregistrer une copie…",
+  "document.tab_unsaved_changes": "Modifications non enregistrées",
  "document.unsaved_changes": "{name} contient des modifications non enregistrées. Si vous n'enregistrez pas, elles seront perdues.",
  "drive.rigid": "{joint} est une liaison rigide : elle maintient ses pièces immobiles, il n'y a donc rien à piloter. Pour les laisser bouger, changer son type dans Modifier la liaison : Revolute pour tourner, Slider pour coulisser, Cylindrical pour les deux.",
  "drive.stopped_by_contact": "Arrêté à {value} : {a} traverserait {b}",
@@ -1622,7 +1624,7 @@
  "help.sketch.insert_svg": "Lit les tracés d'un dessin SVG dans une esquisse, mis à l'échelle, tournés et placés comme vous le définissez. À utiliser pour transformer un logo ou un contour vectoriel en courbes que vous pouvez extruder.",
  "help.sketch.inspect": "Ouvre un rapport sur l'esquisse ouverte : combien de degrés de liberté il reste et si elle est entièrement contrainte. À utiliser pour savoir ce qui bouge encore avant de terminer l'esquisse.",
  "help.sketch.intersect": "Ajoute les courbes ou points où des corps, faces, arêtes ou d'autres esquisses traversent le plan d'esquisse. Ils restent liés et suivent le modèle lorsqu'il change.",
-  "help.sketch.intersection_curve": "Crée des courbes 3D là où deux corps ou faces se rencontrent, liées à eux. À utiliser comme trajectoires ou rails guides qui suivent le modèle.",
+  "help.sketch.intersection_curve": "Crée des courbes 3D là où deux corps, faces ou courbes d'autres esquisses se rencontrent, liées à eux. À utiliser comme trajectoires ou rails guides qui suivent le modèle.",
  "help.sketch.isoparametric_curve": "Crée une courbe 3D le long de la direction U ou V d'une face, par un point que vous choisissez, liée à la face. À utiliser comme trajectoire ou ligne de partage qui suit la surface.",
  "help.sketch.line": "Dessine des lignes connectées point par point, en chaîne ouverte ou en contour fermé. C'est l'outil de base de la plupart des profils.",
  "help.sketch.line.midpoint": "Dessine une ligne de son milieu vers une extrémité, l'autre extrémité étant son symétrique. À utiliser pour des lignes centrées sur un point, comme une arête symétrique.",
@@ -3000,9 +3002,11 @@
  "render.frame_wide": "16:9 · Écran large",
  "render.gpu_depth": "Profondeur maximale des chemins",
  "render.gpu_options_help": "Les échantillons, la profondeur, la graine et l'exposition sont enregistrés avec ce préréglage. Seule la méthode d'image active est enregistrée.",
+  "render.gpu_path_crashed": "SolidCraft s’est fermé pendant sa dernière préparation sur cet adaptateur graphique, très probablement dans le pilote graphique ; il n’est donc plus préparé de lui-même. Utilisez le lancer de rayons sur le CPU, ou réessayez (une mise à jour du pilote réessaie aussi).",
  "render.gpu_path_failed": "Traceur de chemins GPU indisponible",
  "render.gpu_path_first_setup": "La première initialisation sur ce GPU peut prendre plusieurs minutes ; SolidCraft reste utilisable pendant ce temps. Les démarrages suivants réutilisent les shaders compilés lorsque le pilote les conserve.",
  "render.gpu_path_preparing": "Traceur de chemins GPU : compilation des shaders…",
+  "render.gpu_path_retry": "Réessayer",
  "render.gpu_seed": "Graine aléatoire",
  "render.gpu_unavailable": "Le tracé de chemins GPU n'est pas prêt sur cet appareil.",
  "render.ground_apply": "Ajuster et enregistrer le sol",
@@ -3810,6 +3814,8 @@
  "sample.plate.name": "Plaque d'exemple",
  "sample.vents.about": "Rainures en répétition rectangulaire : lignes, colonnes et pas sont des paramètres",
  "sample.vents.name": "Plaque d'aération",
+  "scale.per_axis": "Par axe",
+  "scale.uniform": "Uniforme",
  "search.command_keys": "Entrée exécuter     Maj+Entrée exécuter et garder ouvert     Échap fermer",
  "search.commands": "Commandes",
  "search.design": "Dans cette conception",
@@ -4439,6 +4445,7 @@
  "ui.click_selects_whole_bodies": "Un clic sélectionne des corps entiers",
  "ui.click_then_press_key": "Cliquer, puis appuyer sur la nouvelle touche",
  "ui.close": "Fermer",
+  "ui.close_tab": "Fermer l’onglet",
  "ui.coil": "Hélice",
  "ui.coincident": "Coïncidence",
  "ui.collapse": "Réduire",
@@ -4922,6 +4929,7 @@
  "ui.point_cloud_add_filter": "Ajouter un filtre…",
  "ui.point_cloud_auto_range": "Plage automatique",
  "ui.point_cloud_color_by": "Colorer par",
+  "ui.point_cloud_dots": "Points isolés",
  "ui.point_cloud_file_colors": "Couleurs du fichier",
  "ui.point_cloud_filter_by": "Filtrer par",
  "ui.point_cloud_height_high": "Plus haut",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Análise de accesibilidade",
  "cmd.inspect_center_of_mass": "Centro de masas",
  "cmd.inspect_clearance": "Folga",
-  "cmd.inspect_colored_components": "Activar as cores dos compoñentes",
-  "cmd.inspect_colored_components_disable": "Desactivar as cores dos compoñentes",
  "cmd.inspect_compare": "Comparar corpos",
  "cmd.inspect_compare_picture": "Comparar a imaxe",
  "cmd.inspect_continuity": "Análise de continuidade",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Le os trazados dun debuxo SVG nun bosquexo, escalados, xirados e colocados onde indiques. Úsao para converter un logotipo ou un contorno vectorial en curvas que podes extruír.",
  "help.sketch.inspect": "Abre un informe do bosquexo aberto: cantos graos de liberdade quedan e se está totalmente restrinxido. Úsao para saber o que aínda se move antes de rematar o bosquexo.",
  "help.sketch.intersect": "Engade as curvas ou os puntos onde corpos, caras, arestas ou outros bosquexos cruzan o plano do bosquexo. Quedan ligados e seguen o modelo cando cambia.",
-  "help.sketch.intersection_curve": "Crea curvas 3D onde se atopan dous corpos ou caras, ligadas a eles. Úsaas como traxectorias ou guías que seguen o modelo.",
+  "help.sketch.intersection_curve": "Crea curvas 3D onde se atopan dous corpos, caras ou curvas doutros bosquexos, ligadas a eles. Úsaas como traxectorias ou guías que seguen o modelo.",
  "help.sketch.isoparametric_curve": "Crea unha curva 3D na dirección U ou V dunha cara por un punto que escollas, ligada á cara. Úsaa como traxectoria ou liña de división que segue a superficie.",
  "help.sketch.line": "Debuxa liñas conectadas punto a punto, como cadea aberta ou como contorno pechado. É a ferramenta básica para a maioría dos perfís.",
  "help.sketch.line.midpoint": "Debuxa unha liña desde o seu punto medio ata un extremo, co outro extremo reflectido. Úsao para liñas centradas nun punto, como unha aresta simétrica.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Placa de exemplo",
  "sample.vents.about": "Ranuras nun patrón rectangular: filas, columnas e paso son parámetros",
  "sample.vents.name": "Placa de ventilación",
+  "scale.per_axis": "Por eixo",
+  "scale.uniform": "Uniforme",
  "search.command_keys": "Intro executar     Maiús+Intro executar e manter aberto     Esc pechar",
  "search.commands": "Ordes",
  "search.design": "Neste deseño",
@@ -85,6 +85,7 @@
  "Bottom Right": "למטה מימין",
  "Boundary": "גבול",
  "Bounding box": "תיבה תוחמת",
+  "Bridge": "גשר",
  "CHECK": "בדיקה",
  "COMPONENTS": "רכיבים",
  "CONFIGURATIONS": "תצורות",
@@ -628,6 +629,8 @@
  "Suppress Selected Folders": "השבתת התיקיות שנבחרו",
  "Suppressed": "מושבת",
  "Surface": "משטח",
+  "Surface or face": "משטח או פאה",
+  "Surface or faces": "משטח או פאות",
  "Surface, or faces to turn over": "משטח, או פאות להיפוך",
  "Surfaces": "משטחים",
  "Swap Ends": "החלפת קצוות",
@@ -641,6 +644,7 @@
  "Target": "יעד",
  "Target Body": "גוף יעד",
  "Target Face (optional)": "פאת יעד (אופציונלי)",
+  "Target edges": "מקצועות יעד",
  "Tear": "קריעה",
  "Technical details": "פרטים טכניים",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "הסקיצה המקווקוות מסמנת מישור שמור. יש לבחור פאה חדשה כדי לתקן את ההצמדה.",
@@ -648,6 +652,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "הכיוון חייב להיות ציר או עקומת סקיצה ישרה הנמצאת במישור הסקיצה",
  "The mirror line cannot also be mirrored": "אי אפשר לשקף גם את קו השיקוף עצמו",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "קו השיקוף חייב להיות עקומה ישרה של הסקיצה הזו, ולא אחד מצירי הראשית",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "ציר הראשית ניצב למישור הסקיצה, ולכן אין לו קו במישור",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "מופע היצירה השמור חסר. יש לבחור מיקום יצירה תקין לפני הקישור מחדש.",
  "Then": "אז",
  "These features will be deleted:": "הפיצ'רים הבאים יימחקו:",
@@ -739,6 +744,9 @@
  "a picked edge's body is gone": "הגוף של המקצוע שנבחר כבר לא קיים",
  "add a key for a joint first": "יש להוסיף תחילה מפתח למפרק",
  "ai.connected_toast": "SolidCraft זמין עכשיו ב־{clients}. יש להפעיל אותם מחדש כדי להשתמש בו (הגדרות > עוזר).",
+  "ai.http.allow": "אפשר HTTP לא מאובטח",
+  "ai.http.confirm": "אפשר עבור נקודת קצה זו",
+  "ai.http.warning": "מפתח ה־API והשיחה יישלחו ללא הצפנה. כל מי שיש לו גישה לרשת יכול לקרוא או לשנות אותם. יש להשתמש באפשרות זו רק ברשת מהימנה.",
  "ai.prefs.allow_control": "לאפשר לסוכני AI להתחבר",
  "ai.prefs.allow_control_note": "ערוץ מקומי (MCP). שום דבר לא יוצא מהמחשב הזה.\n\nפותח ערוץ בקרה במחשב זה בלבד (127.0.0.1, פורט 27878 או הפנוי הבא). תוכנה שמתחברת צריכה גם להציג אסימון סודי שרק חשבון המשתמש שלך יכול לקרוא, ונוצר מחדש בכל הפעלה. ייכנס לתוקף בהפעלה הבאה של SolidCraft. כבוי: שום דבר אינו מאזין, אלא אם SolidCraft מופעל עם --control.",
  "ai.prefs.availability": "זמינות",
@@ -750,6 +758,8 @@
  "ai.prefs.follow_camera": "לעקוב אחר המצלמה",
  "ai.prefs.follow_camera_off": "מעקב המצלמה האוטומטי כבוי.",
  "ai.prefs.follow_camera_on": "המצלמה פונה אל הסקיצות שהסוכן יוצר.",
+  "ai.prefs.instructions": "הוראות מותאמות אישית",
+  "ai.prefs.instructions_note": "נשלחות לסוכן בתחילת כל צ'אט, אחרי ההוראות של SolidCraft עצמה: דרך העבודה המועדפת עליך וכללים שיש להקפיד עליהם. שינוי חל מהצ'אט הבא (התחברות או צ'אט חדש).",
  "ai.prefs.intro": "סוכני AI ב־SolidCraft.",
  "ai.prefs.make_default": "לקבוע כברירת מחדל",
  "ai.prefs.no_agents": "אין עדיין סוכנים. אפשר להוסיף סוכן או לרענן כדי למצוא סוכנים מותקנים.",
@@ -963,8 +973,7 @@
  "cmd.inspect_analysis": "ניתוח תצוגה",
  "cmd.inspect_center_of_mass": "מרכז מסה",
  "cmd.inspect_clearance": "מרווח",
-  "cmd.inspect_colored_components": "הפעלת צבעי רכיבים",
-  "cmd.inspect_colored_components_disable": "ביטול צבעי רכיבים",
+  "cmd.inspect_colored_components": "צבעי רכיבים",
  "cmd.inspect_compare": "השוואת גופים",
  "cmd.inspect_compare_picture": "השוואה לתמונת ייחוס",
  "cmd.inspect_continuity": "ניתוח רציפות",
@@ -1081,6 +1090,9 @@
  "cmd.render.compare.divider": "הזז את מחיצת ההשוואה של הרינדור",
  "cmd.render.result.discard": "השלך תוצאת רינדור",
  "cmd.render.result.select": "בחר תוצאת רינדור",
+  "cmd.render.surface.import": "ייבוא מפות משטח",
+  "cmd.render.texture.list": "הצגת תמונות משטח מוטמעות",
+  "cmd.render.texture.remove": "הסרת תמונת משטח מוטמעת",
  "cmd.render_aging_describe": "הזדקנות משטח בשכבות",
  "cmd.render_backends": "מנועי הדמיה",
  "cmd.render_batch": "רינדור כל הצילומים",
@@ -1296,6 +1308,7 @@
  "cmd.timeline_stop": "עצירת ציר הזמן",
  "cmd.timeline_suppress": "השבתת פיצ'ר",
  "cmd.ui.assistant": "הצגה או הסתרה של העוזר",
+  "cmd.view.navigator": "ניווט תצוגה מותאם אישית",
  "cmd.view.render_browser": "דפדפן רינדור",
  "cmd.view.render_dock": "הזז את עגינת הרינדור",
  "cmd.view.render_focus": "תצוגת מיקוד רינדור",
@@ -1323,6 +1336,7 @@
  "cmd.view_previous_tab": "הכרטיסייה הקודמת",
  "cmd.view_rename": "שינוי שם תצוגה שמורה",
  "cmd.view_render_frame": "מדריכי מסגרת רינדור",
+  "cmd.view_ribbon_tabs_only": "רק לשוניות הסרט",
  "cmd.view_right": "תצוגה ימנית",
  "cmd.view_save": "תצוגה שמורה חדשה",
  "cmd.view_shots_strip": "סרגל צילומים",
@@ -1394,15 +1408,22 @@
  "dialog.computing": "מחשב… {seconds} שנ'",
  "dialog.could_not_be_checked": "לא ניתן היה לבדוק",
  "dialog.custom_axis": "↖ ציר מותאם",
+  "dialog.cylinder_face_tip": "הפאה או הקודקוד של המודל שעליהם הגליל ניצב: יש ללחוץ כאן ואז עליהם בתצוגה. אם נשאר ריק, X, Y ו-Z ממקמים אותו.",
  "dialog.dimension_insert_hint": "יש ללחוץ על מידה מניעה אחרת כדי להוסיף את שמה",
  "dialog.dimension_name": "מידה: {name}",
+  "dialog.dimension_step_down": "הפחתה ב־{step}",
+  "dialog.dimension_step_expression": "רק מספר משתנה בצעדים; ביטוי נשאר כפי שנכתב",
+  "dialog.dimension_step_up": "הוספה של {step}",
  "dialog.edit_title": "עריכת {title}",
  "dialog.no_shown_body": "אין גוף מוצג לשינוי: הציגו גוף, או בחרו „גוף חדש”",
  "dialog.pattern_sketch_not_object": "בחרו גופים או פיצ'רים: סקיצה אינה אף אחד מהם. חזרו על העקומות שלה בעזרת המערך או השיקוף של הסקיצה עצמה, או בצעו לה שליפה קודם.",
+  "dialog.primitive_point_tip": "נקודה שממלאת את X, Y ו-Z: יש ללחוץ כאן ואז על קודקוד, מקצוע או פאה של המודל, על נקודה של סקיצה, או על הראשית.",
+  "dialog.reference_edge_tip": "מקצוע ישר של הפאה שנבחרה שממנו נמדד המרחק שלמטה: יש ללחוץ כאן ואז על המקצוע.",
  "dialog.select": "↖ בחירה",
  "dialog.selected_count": "↖ {count} נבחרו",
  "dialog.selection_constraint": "אילוץ {id}",
  "dialog.selection_external_curve": "{sketch} · עקומה {id}",
+  "dialog.selection_external_point": "{point} · {sketch}",
  "dialog.selection_guidance": "יש לבחור קלט כדי לשנות אותו. לחיצה על אובייקט שנבחר מסירה אותו; גם Ctrl/Cmd+לחיצה מחליפה את מצבו. לאחר בדיקת התצוגה המקדימה יש ללחוץ על אישור.",
  "dialog.selection_midpoint": "נקודת אמצע · {id}",
  "dialog.selection_profile": "{sketch} · פרופיל {number}",
@@ -1420,6 +1441,7 @@
  "document.read_only_save": "התכן הזה נפתח לקריאה בלבד: יש לשמור אותו כקובץ חדש",
  "document.save_changes": "לשמור את השינויים ב־{name}?",
  "document.save_copy": "שמירת עותק…",
+  "document.tab_unsaved_changes": "שינויים שלא נשמרו",
  "document.unsaved_changes": "ב־{name} יש שינויים שלא נשמרו. ללא שמירה, הם יאבדו.",
  "drive.rigid": "{joint} הוא מפרק קשיח: הוא מחזיק את החלקים שלו במקומם, ולכן אין מה להניע. כדי שהחלקים יזוזו, שנו את הסוג שלו ב״עריכת מפרק״: Revolute לסיבוב, Slider להחלקה, Cylindrical לשניהם.",
  "drive.stopped_by_contact": "נעצר ב־{value}: {a} היה עובר דרך {b}",
@@ -1440,10 +1462,16 @@
  "each rail's curves must be in one sketch": "עקומות כל מסילה חייבות להיות בסקיצה אחת",
  "feature computation ended without a result": "חישוב הפיצ'ר הסתיים ללא תוצאה",
  "file.open.drawing_filter": "תכנים, קובצי CAD, רשתות משולשים ושרטוטים",
+  "file.open.portal_fallback.no_portal_service": "בורר הקבצים שנפתח אינו של שולחן העבודה: שירות בחירת הקבצים של שולחן העבודה אינו זמין.",
+  "file.open.portal_fallback.no_session_bus": "בורר הקבצים שנפתח אינו של שולחן העבודה: אין אוטובוס הפעלה של D-Bus.",
+  "file.open.portal_fallback.xwayland": "בורר הקבצים שנפתח אינו של שולחן העבודה: תחת XWayland הפורטל דוחה את חלון האב.",
  "file_load.built": "נבנו עד כה: {built} מתוך {total} פיצ'רים.",
  "file_load.converting": "המרת גוף מוצק {done} מתוך {total}",
+  "file_load.inserted": "{name} הוכנס",
  "file_load.inserting": "הוספת גאומטריה",
  "file_load.link_item": "{name} ({done} מתוך {total})",
+  "file_load.opened": "{name} נפתח",
+  "file_load.opened_in_tab": "{name} נפתח בלשונית חדשה",
  "file_load.opening": "פותח את התכן",
  "file_load.preparing_thumbnail": "מכין את התמונה הממוזערת...",
  "file_load.preparing_view": "מכין את התצוגה...",
@@ -1679,7 +1707,7 @@
  "help.sketch.insert_svg": "קריאת הנתיבים של שרטוט SVG לתוך סקיצה, בקנה המידה, בסיבוב ובמיקום שנקבעו. כך הופכים לוגו או קו מתאר וקטורי לעקומות שניתן לשחל.",
  "help.sketch.inspect": "פותח דוח על הסקיצה הפתוחה: כמה דרגות חופש נותרו והאם היא מאולצת במלואה. השתמשו בו כדי לגלות מה עדיין זז לפני שמסיימים את הסקיצה.",
  "help.sketch.intersect": "מוסיף את העקומות או הנקודות שבהן גופים, פאות, קצוות או סקיצות אחרות חותכים את מישור הסקיצה. הן נשארות מקושרות ועוקבות אחר המודל כשהוא משתנה.",
-  "help.sketch.intersection_curve": "יוצר עקומות תלת־ממדיות במקום שבו שני גופים או פאות נפגשים, מקושרות אליהם. מתאים למסלולים או למסילות הנחיה שעוקבים אחר המודל.",
+  "help.sketch.intersection_curve": "יוצר עקומות תלת־ממדיות במקום שבו שני גופים, פאות או עקומות של סקיצות אחרות נפגשים, מקושרות אליהם. מתאים למסלולים או למסילות הנחיה שעוקבים אחר המודל.",
  "help.sketch.isoparametric_curve": "יוצר עקומה תלת־ממדית לאורך כיוון U או V של פאה דרך נקודה שבוחרים, מקושרת לפאה. מתאים למסלול או לקו פיצול שעוקבים אחר המשטח.",
  "help.sketch.line": "משרטט ישרים מחוברים נקודה אחר נקודה, כשרשרת פתוחה או כקו מתאר סגור. זה הכלי הבסיסי לרוב הפרופילים.",
  "help.sketch.line.midpoint": "משרטט ישר מנקודת האמצע שלו אל אחד הקצוות, כשהקצה השני משוקף. מתאים לישרים הממורכזים סביב נקודה, כמו קצה סימטרי.",
@@ -1785,6 +1813,7 @@
  "help.view.navigate": "סיבוב, הזזה או זום של התצוגה בצעדים, כמו רבע סיבוב שמאלה. מתאים להזזה מדויקת של המצלמה במקום גרירה.",
  "help.view.navigation_bar": "הצגה או הסתרה של סרגל הניווט בתחתית חלון התצוגה. אפשר להסתיר אותו לשטח נוסף, או להציג אותו כדי להגיע אל כלי התצוגה בעכבר.",
  "help.view.rename": "מתן שם חדש לתצוגה שמורה. התצוגה עצמה נשארת כפי שהיא.",
+  "help.view.ribbon_tabs_only": "מקפל את הסרט לשורת הלשוניות שלו, כך שחלון התצוגה מקבל את המקום שתפסו הלוחות. לחיצה על לשונית מציגה את הלוחות שלה מעל התצוגה; בחירה חוזרת בפקודה משאירה את הסרט כולו מוצג.",
  "help.view.save": "שמירת מיקום המצלמה הנוכחי כתצוגה בשם בתכן. מתאים לחזרה לאותה זווית בהמשך, למשל לצילומי מסך.",
  "help.view.spin": "הקפת המודל בתצוגה באופן רציף עד ללחיצה או למקש הבא. מתאים להצגת מודל מכל הצדדים.",
  "help.view.tool": "נעילת כלי מצלמה, מסלול, הזזה או זום, כך שגרירה בכפתור השמאלי של העכבר מזיזה את התצוגה עד שמכבים אותו. מתאים למשטח מגע או כשאין כפתור עכבר אמצעי.",
@@ -1999,6 +2028,7 @@
  "material.selection.mixed": "חומרים שונים",
  "measure.at": "מיקום",
  "measure.item": "פריט {number}",
+  "measure.line_to_centre": "מהקו למרכז",
  "measure.quick_copied": "המדידה הועתקה",
  "measure.quick_copy": "לחיצה מעתיקה את המדידה",
  "measure.quick_edges": "{count} מקצועות",
@@ -2029,6 +2059,8 @@
  "nav.blender.help": "גרירה אמצעית מסובבת, Shift וגרירה אמצעית מזיזים, Ctrl וגרירה אמצעית מבצעים זום; גרירה ימנית לא מזיזה את המצלמה",
  "nav.creo.help": "גרירה בלחצן האמצעי מסובבת את התצוגה, Shift והלחצן האמצעי מזיזים אותה, Ctrl וגרירה אנכית בלחצן האמצעי משנים את הזום (גרירה מטה להגדלה); גלילת הגלגלת משנה גם היא את הזום",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "גרירה בכפתור האמצעי או הימני ממשיכה לסובב, להזיז או לשנות זום כפי שהתחילה עד שמשחררים את הכפתור, בלי קשר למקשים שנלחצים או משתחררים בינתיים. כבוי: המקשים הלחוצים קובעים בכל רגע של הגרירה.",
+  "nav.drag_keeps_mode.label": "גרירה שומרת על הניווט שבו התחילה",
  "nav.free_orbit.help": "העכבר והעכבר התלת־ממדי מסובבים דרך שני הקטבים ושומרים על הגלגול. הצמדת הצירים עם Shift מושבתת.",
  "nav.free_orbit.label": "סיבוב חופשי",
  "nav.free_orbit.snap_help": "העכבר והעכבר התלת־ממדי מסובבים דרך שני הקטבים ושומרים על הגלגול. יש להחזיק את Shift בזמן גרירת סיבוב כדי להצמיד את כיוון התצוגה ואת הגלגול.",
@@ -2265,6 +2297,17 @@
  "prefs.auto_operation_note": "איחוד, גוף חדש או חיתוך, לפי מה שהחומר נוגע בו.",
  "prefs.axes": "צירים",
  "prefs.axis": "ציר",
+  "prefs.background_choose": "בחירת תמונה…",
+  "prefs.background_image": "תמונה",
+  "prefs.background_unreadable": "לא ניתן לקרוא את תמונת הרקע",
+  "prefs.blur_cost": "עלות עיבוד יחסית. יותר פסים מציינים בדרך כלל יותר עבודה.",
+  "prefs.blur_device": "לא זמין בהתקן הגרפי או בנתיב העיבוד הזה",
+  "prefs.blur_guard": "איכות הטשטוש הופחתה כדי לשמור על תגובתיות הפריימים. הרדיוס לא השתנה.",
+  "prefs.blur_off": "כבוי",
+  "prefs.blur_reduce_transparency": "מושבת עקב הגדרת הפחתת השקיפות של המערכת",
+  "prefs.blur_software": "לא זמין עם עיבוד גרפי בתוכנה (gpu-software)",
+  "prefs.blur_source": "לא זמין בתצוגת סביבת העבודה הזו",
+  "prefs.blur_web": "לא זמין בנתיב העיבוד הזה בדפדפן",
  "prefs.bodies_folders": "תיקיות גופים",
  "prefs.bodies_folders_always": "תמיד",
  "prefs.bodies_folders_never": "אף פעם",
@@ -2278,6 +2321,8 @@
  "prefs.browser_eye_left": "סמל העין ליד חץ הקיפול",
  "prefs.browser_eye_left_note": "שורות עץ התכן מציגות את סמל העין ליד חץ הקיפול, כמו קודם, במקום בעמודה בקצה הימני של השורות.",
  "prefs.browser_reveal_on_hover": "הצגה בריחוף",
+  "prefs.browser_rows_start_closed": "שורות עץ התכן מוצגות סגורות",
+  "prefs.browser_rows_start_closed_note": "מיקומים ותיקיות בעץ התכן מוצגים סגורים, כך שתכן עם רכיבים רבים מציג את השורות העליונות שלו. כל שורה נפתחת בחץ שלה, ב„הרחבת הכול” או ב„איתור בעץ התכן”, שפותח רק את השורות שמובילות לגוף שלו וסוגר שוב את אלה שהאיתור הקודם פתח. גוף שנבחר בתצוגה התלת־ממדית משאיר את עץ התכן כפי שהוא. כשהאפשרות כבויה התיקיות מוצגות פתוחות, המיקומים מוצגים כפי שקובעת האפשרות „רכיבים פתוחים מההתחלה”, ובחירה בתצוגה התלת־ממדית פותחת את עץ התכן עד לגוף שלה, כמו קודם.",
  "prefs.browser_show_note": "״מוצג״ משאיר את הדפדפן על המסך. ״הצגה בריחוף״ מסתיר אותו עד שהמצביע מגיע למקומו או ללשונית הדקה בקצהו השמאלי, והוא נשאר פתוח כל עוד המצביע בתוכו או שתפריט ממנו פתוח.",
  "prefs.browser_shown": "מוצג",
  "prefs.built_in": "מובנה",
@@ -2288,6 +2333,7 @@
  "prefs.carousel_previous": "הקודם",
  "prefs.choose_font": "בחירת קובץ גופן…",
  "prefs.click": "לחיצה",
+  "prefs.command_dialog_values": "תיבות דו-שיח של פקודות",
  "prefs.contact_shading": "הצללת מגע רכה",
  "prefs.contact_shading_note": "הצללה רכה במקומות שבהם חלקים מתקרבים.",
  "prefs.context_menu": "תפריט הקשר",
@@ -2323,6 +2369,13 @@
  "prefs.dialogs_edge": "בקצה התצוגה",
  "prefs.dialogs_left_column": "בעמודה השמאלית",
  "prefs.dialogs_note": "היכן נפתחות תיבות הדו־שיח של הפקודות: מעוגנות בקצה התצוגה, או בעמודה השמאלית במקום הדפדפן וההיסטוריה, שחוזרים כפי שהיו כשהתיבה נסגרת.",
+  "prefs.dimension_step_angle": "מה שהחצים בחלון, למעלה/למטה והגלגלת מוסיפים לזווית",
+  "prefs.dimension_step_length": "מה שהחצים בחלון, למעלה/למטה והגלגלת מוסיפים לאורך",
+  "prefs.dimension_steps": "צעדי החלון",
+  "prefs.dimension_values": "ערכי מידות",
+  "prefs.dimension_values_note": "היכן מקלידים את ערך המידה. לחלון יש חצים שמשנים אותו בצעדים; כלי המידה מציב קודם את הטקסט.",
+  "prefs.dimension_values_view": "בתצוגה",
+  "prefs.dimension_values_window": "בחלון",
  "prefs.display": "תצוגה",
  "prefs.edges": "מקצועות והצללה",
  "prefs.extend": "הרחבה",
@@ -2376,6 +2429,8 @@
  "prefs.graphics_page.surfaces_edges": "משטחים וקצוות",
  "prefs.graphics_page.view_bar": "גם בסרגל התצוגה",
  "prefs.graphics_presets_note": "הגדרות קבועות מראש קובעות יחד את הבחירות שלמטה.",
+  "prefs.ground_shadow_follows_model": "צל הקרקע עוקב אחר המודל",
+  "prefs.ground_shadow_follows_model_help": "מקם את הצל מתחת לגוף הגלוי הנמוך ביותר. כשהאפשרות כבויה, הצל של מודלים מוגבהים נשאר במישור הקרקע העובר בראשית הצירים.",
  "prefs.hide_constraint_glyphs_zoomed_out": "הסתרת סמלי אילוצים בהקטנה",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "סמלי האילוצים נעלמים כשהשרטוט מוקטן מספיק כדי שלא יעמיסו על התצוגה. כבוי: הם נשארים בגודל מסך קבוע בכל זום.",
  "prefs.history": "ציר הזמן",
@@ -2402,6 +2457,10 @@
  "prefs.invert_curved_roll_arrows_note": "שני החצים המעוגלים בפינת הקובייה מסובבים את התצוגה במישור המסך. פועל: החץ עם כיוון השעון מסובב נגד כיוון השעון, והחץ נגד כיוון השעון מסובב עם כיוון השעון. כבוי: כל חץ מסובב את התצוגה לפי העקום שלו.",
  "prefs.invert_navigator_arrows": "היפוך חצי סיבוב קוביית התצוגה",
  "prefs.invert_navigator_arrows_note": "החצים סביב הקובייה מחוויים את המצלמה לכיוון שהחץ מצביע, כמו ב-Fusion ו-Inventor: החץ שמשמאל מצביע ימימה ומניע את המצלמה ימימה. כבוי: החץ מסובב את הקובייה אל הצד שבו הוא יושב, כך שחץ שמאל מניע את המצלמה שמאלה. חצי הגלילה המעוגלים אינם מושפעים.",
+  "prefs.keep_unsaved_also_asks": "לשאול גם כשהכרטיסייה נסגרת",
+  "prefs.keep_unsaved_also_asks_tip": "כשאפשרות זו כבויה, הכרטיסייה נסגרת ללא חלון הדפדפן לאחר שהעותק של כל תכן שלא נשמר עודכן.",
+  "prefs.keep_unsaved_in_browser": "לשמור עבודה שלא נשמרה בדפדפן זה",
+  "prefs.keep_unsaved_in_browser_tip": "השינויים שלא נשמרו בכל תכן פתוח נשמרים מעודכנים באחסון הפרטי של דפדפן זה. בביקור הבא תוצע שחזורם.",
  "prefs.keep_work_on_tab_switch": "השארת תיבות דו־שיח וכלים פתוחים במעבר בין עיצובים",
  "prefs.keep_work_on_tab_switch_note": "כל לשונית עיצוב שומרת את תיבת הדו־שיח או הכלי הפתוחים בה, עם מה שבחרת והקלדת בהם, ואת לשונית סרגל הכלים שלה. הם מחכים לך כשתחזור לעיצוב. כבוי: מעבר בין עיצובים מבטל אותם ומציג את הלשונית מודל.",
  "prefs.labels": "תוויות",
@@ -2413,6 +2472,8 @@
  "prefs.layout_page.card": "כרטיס",
  "prefs.layout_page.column": "עמודה",
  "prefs.layout_page.hover": "מעבר עכבר",
+  "prefs.layout_page.hover_panel_menus": "מעבר בין תפריטי לוחות בריחוף",
+  "prefs.layout_page.hover_panel_menus_help": "לחצו על שם לוח ברצועת הכלים כדי לפתוח את התפריט שלו. העבירו את הסמן מעל שם של לוח אחר כדי לעבור לתפריט שלו. הזיזו את הסמן אל מחוץ לרצועת הכלים ולתפריט הפתוח כדי לסגור אותו.",
  "prefs.layout_page.icons_labels": "סמלים + תוויות",
  "prefs.layout_page.ok_cancel": "אישור וביטול",
  "prefs.layout_page.on_hover": "בעת מעבר עכבר",
@@ -2515,6 +2576,8 @@
  "prefs.quality_smoother": "חלק יותר",
  "prefs.quick_measure": "מדידה מהירה בפינת התצוגה",
  "prefs.quick_measure_note": "מציג את מידות הבחירה בפינה הימנית התחתונה של התצוגה, מעל ההיסטוריה: אורך מקצוע (או Ø ו-R למקצוע עגול), שטח פאה, מיקום נקודה, המרחק והזווית בין שני פריטים, והסכום של כמה מקצועות או פאות. לחיצה מעתיקה אותו.",
+  "prefs.remember_dialog_values": "זכור ערכים בתיבות דו-שיח של פקודות",
+  "prefs.remember_dialog_values.help": "כבוי כברירת מחדל. כשהוא פועל, לאחר הצלחת פקודה, הערכים והאפשרויות הבטוחים שלה ישמשו שוב בפעם הבאה שתפתח את אותה פקודה, עד לסגירת SolidCraft.",
  "prefs.render_previous_geometry_budget": "שימוש בתקציב הגאומטריה הקודם לתצוגה מקדימה של רינדור",
  "prefs.render_previous_geometry_budget_help": "שחזור מגבלת הגאומטריה הקבועה הקודמת (512 MiB במחשב שולחני של 64 סיביות, 128 MiB בפלטפורמות אחרות) במקום התקציב המבוסס על ההתקן.",
  "prefs.reports_saved": "{n} שמורים",
@@ -2523,6 +2586,8 @@
  "prefs.ribbon_click_ends_tool_note": "לחיצה על לחצן הסרט המודגש של כלי השרטוט שבשימוש מסיימת את הכלי, כך שלחיצות בתצוגה בוחרות שוב. כבוי: הלחיצה מפעילה את הכלי מחדש.",
  "prefs.ribbon_reveal": "הצגת תוצאות חיפוש בסרט",
  "prefs.ribbon_reveal_note": "מעבר עם הסמן מעל תוצאה בחיפוש פקודות מראה היכן הפקודה נמצאת בסרט: הלשונית, הכפתור או השורה שלה בתפריט הנפתח של לוח. פקודה שהופעלה מהחיפוש מהבהבת שם, ופקודה פעילה מתפריט נפתח מסמנת את הלוח שלה.",
+  "prefs.ribbon_tabs_only": "הצגת לשוניות הסרט בלבד",
+  "prefs.ribbon_tabs_only_note": "הסרט מתקפל לשורת הלשוניות שלו. לחיצה על לשונית מציגה את הלוחות שלה מעל התצוגה עד שפקודה מתחילה או שהמצביע עוזב אותם. הפקודה ״רק לשוניות הסרט״ בלשונית תצוגה, או קיצור המקשים שלה, מחליפה הגדרה זו.",
  "prefs.right_click": "לחיצה ימנית",
  "prefs.saving": "הפעלה ושמירה",
  "prefs.scale_note": "גם Ctrl + / Ctrl − בחלון. הכפתורים בגודל 28 px ב־100%.",
@@ -2533,6 +2598,8 @@
  "prefs.section_hatch_by_part": "לפי חלק",
  "prefs.section_hatch_one": "סגנון אחד",
  "prefs.select": "בחירה",
+  "prefs.select_hidden_edges": "בחירת קצוות מוסתרים בתצוגה מוצללת עם קצוות מוסתרים",
+  "prefs.select_hidden_edges_help": "מאפשר לבחור קצוות דרך פאות בתצוגה מוצללת עם קצוות מוסתרים, גם עבור Fillet. כיבוי שומר על אופן הבחירה של v0.30.1. גופים שהוסתרו עדיין אינם ניתנים לבחירה.",
  "prefs.select_one_item": "בחירת פריט אחד",
  "prefs.select_other_hidden": "בחירת גאומטריה מוסתרת באמצעות בחירה אחרת",
  "prefs.select_other_hidden_help": "מופעל: כולל גופים, סקיצות וקצוות מוסתרים בקרבת הסמן. כבוי: שימוש ברשימה המקורית של גאומטריה גלויה מתחת לסמן.",
@@ -2557,6 +2624,8 @@
  "prefs.sketch.click_selects": "לחיצה בוחרת",
  "prefs.sketch.conflict_colour": "צבע התנגשות",
  "prefs.sketch.drawing": "שרטוט",
+  "prefs.sketch.ellipse_axes": "שרטוט אליפסות עם הצירים שלהן",
+  "prefs.sketch.ellipse_axes_note": "הציר הראשי והציר המשני כקווי עזר, כדי שאפשר יהיה לתת מידות לחצאי הצירים ולצירים. כבוי: האליפסה בלבד, ו-D עליה נותן את הרדיוס המשני שלה בכל מקום שאליו נגרר הערך, משורטט ומסומן R כמו קודם.",
  "prefs.sketch.exit_keep": "שמירה",
  "prefs.sketch.exit_previous": "חזרה לתצוגה הקודמת",
  "prefs.sketch.exit_unless_rotated": "אלא אם סובבה",
@@ -2650,6 +2719,10 @@
  "prefs.theme_follow_off": "כבוי",
  "prefs.theme_follow_stop": "הפסקת המעקב",
  "prefs.theme_import_hint": "לחצו כדי לבחור קובץ ערכת נושא, שחררו קובץ כאן, או הקישו Ctrl+V ‏(Cmd+V ב-Mac) אחרי שהעתקתם ערכת נושא",
+  "prefs.theme_notice_dismiss": "הסתרה",
+  "prefs.theme_option_blur": "טשטוש מאחורי לוחות",
+  "prefs.theme_option_blur_help": "טשטוש מאחורי לוחות שקופים למחצה, בפיקסלים פיזיים. אפס מכבה את הטשטוש.",
+  "prefs.theme_option_invalid": "הערך השמור עבור {option} אינו תקין; נעשה שימוש בברירת המחדל של ערכת הנושא. הערך השמור נשמר ללא שינוי.",
  "prefs.theme_option_opacity": "אטימות",
  "prefs.theme_option_opacity_help": "כוונון אטימות הלוחות הצפים. רמת אטימות מינימלית שומרת על קריאות הטקסט על רקע צבעי חלון התצוגה.",
  "prefs.theme_option_tab_colours": "צבעי כרטיסיות",
@@ -2658,6 +2731,7 @@
  "prefs.theme_option_tab_fade_ms_help": "שנה בהדרגה את צבעי הלוח ואזור התצוגה בעת מעבר בין כרטיסיות. ערך אפס מבצע את המעבר מיד.",
  "prefs.theme_options_badge": "אפשרויות",
  "prefs.theme_options_more": "עוד · {count}",
+  "prefs.theme_options_newer": "ערכת נושא זו דורשת גרסה חדשה יותר של SolidCraft. לאחר השדרוג יש לייבא שוב את ערכת הנושא המקורית כדי לשחזר את הגדרות האפשרויות שלה.",
  "prefs.theme_options_reset": "איפוס",
  "prefs.theme_options_unavailable": "לא זמין במכשיר זה",
  "prefs.theme_paste": "הדבקת ערכת נושא",
@@ -2721,6 +2795,12 @@
  "recovery.just_now": "זה עתה",
  "recovery.min_ago": "לפני {count} דק'",
  "recovery.never_saved": "לא נשמר מעולם",
+  "recovery.open_saved": "פתיחת הגרסה השמורה",
+  "recovery.restore": "שחזור",
+  "recovery.restore_intro": "שינויים שלא נשמרו כשדף זה נסגר לאחרונה שמורים בדפדפן זה.",
+  "recovery.restore_row": "{name}, שונה {when}",
+  "recovery.restore_title": "לשחזר תכנים שלא נשמרו?",
+  "recovery.restore_title_one": "לשחזר תכן שלא נשמר: {name}, שונה {when}?",
  "refused.change": "לא ניתן היה לשנות את {body}.",
  "refused.cut": "לא ניתן היה לחתוך את {body}.",
  "refused.face_curved": "אחת הפאות המעוקלות שלו אינה ניתנת לשימוש במידול.",
@@ -3242,9 +3322,11 @@
  "render.frame_wide": "16:9 · רחב",
  "render.gpu_depth": "עומק מסלול מרבי",
  "render.gpu_options_help": "הדגימות, העומק, הזרע והחשיפה נשמרים עם ההגדרה הזאת. נשמרת רק שיטת התמונה הפעילה.",
+  "render.gpu_path_crashed": "SolidCraft נסגר בזמן ההכנה על מתאם גרפי זה בפעם הקודמת, ככל הנראה בתוך מנהל ההתקן הגרפי, ולכן ההכנה לא תתבצע שוב מעצמה. יש להשתמש במעקב קרניים על המעבד במקום זאת, או לנסות שוב (עדכון מנהל ההתקן גם מנסה שוב).",
  "render.gpu_path_failed": "מעקב המסלולים ב־GPU אינו זמין",
  "render.gpu_path_first_setup": "ההגדרה הראשונה ב־GPU הזה עשויה להימשך כמה דקות; SolidCraft נשאר זמין לשימוש בינתיים. הפעלות מאוחרות יותר משתמשות שוב בשיידרים שהודרו, כשמנהל ההתקן שומר אותן.",
  "render.gpu_path_preparing": "מעקב מסלולים ב־GPU: הידור שיידרים…",
+  "render.gpu_path_retry": "לנסות שוב",
  "render.gpu_seed": "זרע אקראי",
  "render.gpu_unavailable": "מעקב מסלולים ב־GPU אינו מוכן במכשיר הזה.",
  "render.ground_apply": "התאמת הקרקע ושמירתה",
@@ -3858,6 +3940,7 @@
  "render.stage_panels.extent": "ממדי התחום",
  "render.stage_panels.fit_save": "התאמה ושמירה",
  "render.stage_panels.gpu_required": "נדרש מעקב נתיב ב-GPU",
+  "render.stage_panels.grain_angle": "זווית סיבי העץ",
  "render.stage_panels.keep": "שמור",
  "render.stage_panels.kept": "נשמר",
  "render.stage_panels.kept_fields": "מצלמה, דגימה, ממדים, קישורים אופטיים, גאומטריית CAD ותכונות הנדסיות.",
@@ -3976,6 +4059,19 @@
  "render.subsurface_enable": "הילוך אקראי לפיזור פנימי",
  "render.subsurface_help": "לדיאלקטרי סגור בלבד. פיזור ובליעת RGB הם מקדמים נפרדים לכל mm. המסלולים מתפזרים בתוך הגאומטריה בפועל, ואז נשברים או מוחזרים בגבול. יש לבטל העברת צל ישרה, הסרת רעש משטחית ונפח חיצוני; ולהשתמש בשכבת פרנל אחת. אינו שיידר דיפוזיה, אינו רשת צפיפות ואינו חומר מדוד. תווך צפוף עשוי לדרוש יותר דגימות ועומק מסלול.",
  "render.subsurface_rate": "קצב התנגשויות הפיזור",
+  "render.surface_import.author": "יוצר",
+  "render.surface_import.busy": "מתבצע ייבוא תמונה…",
+  "render.surface_import.complete": "בחר תמונה והזן את היוצר, המקור והרישיון שלה.",
+  "render.surface_import.embedded": "תמונה מיובאת",
+  "render.surface_import.failed": "ייבוא התמונה לא הושלם.",
+  "render.surface_import.license": "רישיון / בעלות",
+  "render.surface_import.raytrace_required": "תמונות מחייבות מעקב קרניים ב־CPU או ב־GPU. יש לבחור זאת תחת פלט.",
+  "render.surface_import.repeat_u": "חזרת U",
+  "render.surface_import.repeat_v": "חזרת V",
+  "render.surface_import.save": "שמירת תמונה על הגוף",
+  "render.surface_import.saved_cpu": "יש לשמור את המפות לשימוש בהדמיה ב־CPU.",
+  "render.surface_import.source": "מקור",
+  "render.surface_import.title": "ייבוא תמונה",
  "render.tone_aces_fitted": "ACES מותאם",
  "render.tone_reinhard": "ריינהרד",
  "render.transmission_scope": "זכוכית GPU תומכת בתווכים נפרדים מאושרים. תווכים מקוננים ללא הגבלה ומעריך העברה ללא רעש אינם מסופקים.",
@@ -4052,6 +4148,8 @@
  "sample.plate.name": "לוח לדוגמה",
  "sample.vents.about": "חריצים במערך מלבני: מספר השורות, מספר העמודות והפסיעה הם פרמטרים",
  "sample.vents.name": "לוח אוורור",
+  "scale.per_axis": "לפי ציר",
+  "scale.uniform": "אחיד",
  "search.command_keys": "Enter הרצה     Shift+Enter הרצה והשארה פתוח     Esc סגירה",
  "search.commands": "פקודות",
  "search.design": "בתכן זה",
@@ -4142,6 +4240,32 @@
  "sketch.dof_left": "נותרו {count} דרגות חופש",
  "sketch.dof_left_one": "נותרה {count} דרגת חופש",
  "sketch.draw_curves": "שרטוט כ־{linetype}",
+  "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+  "sketch.error.nothing_to_break": "nothing to break here",
+  "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+  "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+  "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+  "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+  "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+  "sketch.hint.break": "Break: click a curve where it should split",
+  "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+  "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+  "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+  "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+  "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+  "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+  "sketch.hint.fallback": "Click in the sketch",
+  "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+  "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+  "sketch.hint.open_done": "Open done",
+  "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+  "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+  "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+  "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+  "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+  "sketch.hint.slot": "Slot: click both ends, then the width",
+  "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+  "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
  "sketch.make_selection": "המרת הבחירה ל־{linetype}",
  "sketch.open_ends": "קצוות פתוחים: {count}",
  "sketch.status_conflict": "אילוצים סותרים",
@@ -4363,6 +4487,7 @@
  "ui.3d_sketch": "סקיצה תלת־ממדית",
  "ui.activate": "הפעלה",
  "ui.active_component": "רכיב פעיל",
+  "ui.addToQuickAccess": "הוספה לגישה מהירה",
  "ui.add_configuration": "הוספת תצורה",
  "ui.add_parameter": "הוספת פרמטר",
  "ui.agent_chat": "צ'אט עם סוכן",
@@ -4697,6 +4822,7 @@
  "ui.click_selects_whole_bodies": "לחיצה בוחרת גופים שלמים",
  "ui.click_then_press_key": "יש ללחוץ ואז להקיש על המקש החדש",
  "ui.close": "סגירה",
+  "ui.close_tab": "סגירת הלשונית",
  "ui.coil": "סליל",
  "ui.coincident": "מתלכד",
  "ui.collapse": "כיווץ",
@@ -4784,6 +4910,7 @@
  "ui.default_modelling_orientation": "כיוון מידול ברירת מחדל",
  "ui.delete": "מחיקה",
  "ui.delete_select_first": "בחרו קודם מה למחוק: תכונות, גופים, רכיבים או גאומטריית סקיצה",
+  "ui.dependents_select_first": "בחרו קודם מה להציג את התלויים שלו",
  "ui.depth": "עומק",
  "ui.design": "תכן",
  "ui.design_properties.author": "מחבר",
@@ -4913,6 +5040,11 @@
  "ui.factor": "מקדם",
  "ui.fade": "דעיכה",
  "ui.fade_length": "אורך דעיכה",
+  "ui.fair_iterations": "מספר איטרציות",
+  "ui.fair_keep_edges": "שמירה על המקצועות",
+  "ui.fair_strength": "עוצמה",
+  "ui.fair_surface_title": "החלקת משטח",
+  "ui.fair_tolerance_default": "0.001 מגודל הגוף",
  "ui.feature_history": "ציר הזמן",
  "ui.feature_options": "אפשרויות פיצ'ר",
  "ui.features": "פיצ'רים",
@@ -4941,6 +5073,10 @@
  "ui.fillet_setback_least": "יותר מ-{least}",
  "ui.fillet_setback_tip": "היכן מתחיל טלאי הפינה החלק: המרחק לאורך כל קצה מהפינה. ברירת המחדל היא פי {factor} מהרדיוס. עליה להיות גדולה מהנסיגה המזערית, שבה העיגולים נפגשים בלעדיה: הרדיוס כשהפאות ניצבות זו לזו.",
  "ui.fillet_smooth_radius": "שינוי רדיוס חלק",
+  "ui.fillet_turn": "פניות",
+  "ui.fillet_turn_mitre": "מיטר",
+  "ui.fillet_turn_swept": "מסובב",
+  "ui.fillet_turn_tip": "היכן ששני עיגולים מסתובבים סביב קצה פינה חד ביניהם, כמו העיגולים בבסיס בליטה ליד הקצוות הזקופים שלה.\nמיטר: העיגולים נמשכים עד שהם נפגשים במיטר.\nמסובב: העיגולים נעצרים בקצה הפינה ומסתובבים סביבו, והפינה היא טורוס המשיק לשניהם. רק לעיגולים ברדיוס אחד סביב קצה פינה ישר וקמור.",
  "ui.fillet_type_choices_tip": "רדיוס קבוע: רדיוס אחד לכל אורך הקצה.\nאורך מיתר: רוחב העיגול נשאר זהה, בכל זווית שבה הפאות נפגשות.\nרדיוס משתנה: רדיוס בכל קצה, ועוד לאורך הקצה אם מוסיפים.\nרציף בעקמומיות: חתך בלי שבר בהשתקפויות היכן שהוא פוגש פאות מישוריות (G2).\nספליין: הרדיוס לאורך הקצה עוקב אחרי רדיוסי בקרה שאתם קובעים.",
  "ui.fillet_type_curvature": "רציף בעקמומיות",
  "ui.fillet_type_tip": "החתך לרוחב הקצה. רציף בעקמומיות: חתך רציף בעקמומיות (G2) בין פאות מישוריות, כך שההשתקפויות עוברות מהפאות אל העיגול בלי שבר.",
@@ -4986,6 +5122,7 @@
  "ui.heading_construct": "עזר",
  "ui.heading_create": "יצירה",
  "ui.heading_create_sketch": "יצירת סקיצה",
+  "ui.heading_custom_view_navigator": "ניווט תצוגה מותאם אישית",
  "ui.heading_cylinder": "גליל",
  "ui.heading_design": "תכן",
  "ui.heading_draft": "שיפוע יציקה",
@@ -5093,6 +5230,7 @@
  "ui.inspect": "בדיקה",
  "ui.instances": "מופעים",
  "ui.intersect": "חיתוך משותף",
+  "ui.intersection_curve_second_pick": "עקומת חיתוך: יש ללחוץ על הפאה או העקומה השנייה (לחיצה ימנית להתחלה מחדש)",
  "ui.iso_4753": "ISO 4753",
  "ui.isolate": "בידוד",
  "ui.join": "איחוד",
@@ -5121,6 +5259,7 @@
  "ui.manipulator_free_alt": "גרירה חופשית של הידית גם עם Alt/Option",
  "ui.manipulator_free_alt_tip": "פעיל: Alt/Option או Ctrl/Cmd על חיצי השליפה / הידית מבטלים הצמדת ערכים. כבוי: Ctrl/Cmd בלבד.",
  "ui.manufacture": "ייצור",
+  "ui.match_surface_title": "התאמת משטח",
  "ui.material_review.axes": "צירים מקומיים של החומר; לא הוגדרה אוריינטציה לגוף.",
  "ui.material_review.claims": "המקורות והרישיונות הם טענות שלא אומתו. ערכים חסרים נשארים לא ידועים.",
  "ui.material_review.compressive_strength": "חוזק לחיצה",
@@ -5143,6 +5282,9 @@
  "ui.material_review.title": "בדיקת נתוני חומר פיזיקליים",
  "ui.material_review.unknown": "לא ידוע",
  "ui.material_review.yield_strength": "חוזק כניעה",
+  "ui.mcp_agents": "סוכנים דרך MCP",
+  "ui.mcp_compact": "פלט מקוצר",
+  "ui.mcp_compact_note": "לסוכנים שמחוברים דרך שרת ה-MCP ‏(solidcraft-cli mcp): ‏inspect_design מסכם סקיצות ותוצאות הכלים אינן מעוצבות, כך שהן צורכות פחות טוקנים. חל על הפעלות סוכן שמתחילות אחרי השינוי; גם ‎--compact או SOLIDCRAFT_MCP_COMPACT=1 מפעילים אותו.",
  "ui.measure": "מדידה",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "3MF עם תגי פאות",
@@ -5184,6 +5326,7 @@
  "ui.options": "אפשרויות",
  "ui.orbit": "סיבוב מבט",
  "ui.orbit_around": "סיבוב מבט סביב",
+  "ui.organize": "ארגון",
  "ui.orientation": "אוריינטציה",
  "ui.origin": "ראשית",
  "ui.palette_construction_mode": "מצב עזר (X)",
@@ -5228,6 +5371,7 @@
  "ui.point_cloud_add_filter": "הוספת מסנן…",
  "ui.point_cloud_auto_range": "טווח אוטומטי",
  "ui.point_cloud_color_by": "צביעה לפי",
+  "ui.point_cloud_dots": "נקודות בודדות",
  "ui.point_cloud_file_colors": "צבעי הקובץ",
  "ui.point_cloud_filter_by": "סינון לפי",
  "ui.point_cloud_height_high": "הגובה המרבי",
@@ -5272,6 +5416,7 @@
  "ui.quality": "איכות",
  "ui.quantity": "כמות",
  "ui.quantity_2": "כמות 2",
+  "ui.quick_access_full": "סרגל הגישה המהירה מכיל {count} פקודות; יש להסיר אחת כדי להוסיף אחרת",
  "ui.quit": "יציאה",
  "ui.radial_context_menu": "תפריט הקשר מעגלי",
  "ui.radius": "רדיוס",
@@ -5289,6 +5434,7 @@
  "ui.relink_not_linked": "רכיב זה אינו מקושר לתכן מקור.",
  "ui.relink_select_one": "יש לבחור תחילה רכיב מקושר אחד או אחד המופעים שלו.",
  "ui.relink_source_all": "קישור מחדש למקור (כל המופעים)…",
+  "ui.removeFromQuickAccess": "הסרה מהגישה המהירה",
  "ui.removeFromToolbar": "הסרה מסרגל הכלים",
  "ui.removeSection": "הסרת מקטע",
  "ui.render": "הדמיה",
@@ -5297,6 +5443,8 @@
  "ui.repeat_nothing": "אין עדיין מה לחזור עליו: התחל קודם כלי או תיבת דו־שיח.",
  "ui.replace_with_link_done": "העותקים הם עכשיו מיקומים של התכן המקושר.",
  "ui.report_a_bug": "דיווח על באג",
+  "ui.report_characters_left_one": "תווים שנותרו: {count}",
+  "ui.report_characters_left_other": "תווים שנותרו: {count}",
  "ui.reset": "איפוס",
  "ui.reset_all": "איפוס הכול",
  "ui.reset_the_settings_on_this_page": "איפוס ההגדרות בדף זה",
@@ -5581,6 +5729,14 @@
  "values must be numbers or expressions": "הערכים חייבים להיות מספרים או ביטויים",
  "view.auto_ortho_faces": "פרספקטיבה בזמן סיבוב, אורתוגרפי על פאות",
  "view.render_inspector": "מפקח רינדור",
+  "view_gizmo.arrows": "חיצי סיבוב",
+  "view_gizmo.home": "לחצן תצוגת בית",
+  "view_gizmo.no_such_body": "אין בעיצוב הזה גוף בשם הזה.",
+  "view_gizmo.note": "בחרו גוף בתצוגה. הוא נשמר עם ההעדפות ופרופילי ההגדרות שלכם ומוצג בכל עיצוב. לחצו על אחת מפאותיו כדי להביט בה ישירות.",
+  "view_gizmo.texture": "מרקם",
+  "view_gizmo.themed": "לפי ערכת הנושא",
+  "view_gizmo.too_detailed": "מפורט מדי לניווט התצוגה (יותר מ-10,000 משולשים)",
+  "view_gizmo.too_thin": "ארוך ודק מדי לניווט התצוגה: הצד הדק ביותר חייב להיות לפחות חמישית מהצד הארוך ביותר",
  "web.files.insert_drawings_hint": "קובצי CAD, רשתות משולשים, DXF או SVG אל התכן הפתוח",
  "web.files.insert_stored_drawings_hint": "אל התכן הפתוח (קובצי CAD, רשתות משולשים, DXF, SVG)",
  "web.open_full": "פתיחה ב־SolidCraft",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analiza dostupnosti",
  "cmd.inspect_center_of_mass": "Središte mase",
  "cmd.inspect_clearance": "Provjera zazora",
-  "cmd.inspect_colored_components": "Omogući boje komponenti",
-  "cmd.inspect_colored_components_disable": "Onemogući boje komponenti",
  "cmd.inspect_compare": "Usporedi tijela",
  "cmd.inspect_compare_picture": "Usporedi sliku",
  "cmd.inspect_continuity": "Analiza kontinuiteta",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Čita putanje SVG crteža u skicu, skalirane, zakrenute i postavljene kako zadate. Upotrijebite ga za pretvaranje logotipa ili vektorskog obrisa u krivulje koje možete ekstrudirati.",
  "help.sketch.inspect": "Otvara izvješće o otvorenoj skici: koliko je stupnjeva slobode preostalo i je li potpuno ograničena. Upotrijebite ga kako biste saznali što se još pomiče prije dovršetka skice.",
  "help.sketch.intersect": "Dodaje krivulje ili točke u kojima tijela, lica, bridovi ili druge skice presijecaju ravninu skice. Ostaju povezane i prate model kad se promijeni.",
-  "help.sketch.intersection_curve": "Izrađuje 3D krivulje na mjestu gdje se dva tijela ili lica susreću, povezane s njima. Upotrijebite ih kao putanje ili vodilice koje prate model.",
+  "help.sketch.intersection_curve": "Izrađuje 3D krivulje na mjestu gdje se dva tijela, lica ili krivulje drugih skica susreću, povezane s njima. Upotrijebite ih kao putanje ili vodilice koje prate model.",
  "help.sketch.isoparametric_curve": "Izrađuje 3D krivulju u smjeru U ili V lica kroz točku koju odaberete, povezanu s licem. Upotrijebite je kao putanju ili liniju razdvajanja koja prati plohu.",
  "help.sketch.line": "Crta povezane linije točku po točku, kao otvoreni lanac ili zatvoreni obris. To je osnovni alat za većinu profila.",
  "help.sketch.line.midpoint": "Crta liniju od njezine središnje točke do jednog kraja, a drugi kraj zrcali. Upotrijebite ga za linije centrirane na točku, primjerice simetričan brid.",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Hozzáférhetőség-elemzés",
  "cmd.inspect_center_of_mass": "Tömegközéppont",
  "cmd.inspect_clearance": "Hézag",
-  "cmd.inspect_colored_components": "Komponensszínek bekapcsolása",
-  "cmd.inspect_colored_components_disable": "Komponensszínek kikapcsolása",
  "cmd.inspect_compare": "Testek összehasonlítása",
  "cmd.inspect_compare_picture": "Kép összehasonlítása",
  "cmd.inspect_continuity": "Folytonosságelemzés",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Beolvassa egy SVG-rajz útvonalait egy vázlatba, az Ön által megadott léptékkel, elforgatással és helyen. Használja egy logó vagy vektoros körvonal kihúzható görbékké alakítására.",
  "help.sketch.inspect": "Jelentést nyit a megnyitott vázlatról: hány szabadságfok maradt, és teljesen kényszerezett-e. Használja annak kiderítésére, mi mozdul még, mielőtt befejezi a vázlatot.",
  "help.sketch.intersect": "Hozzáadja azokat a görbéket vagy pontokat, ahol testek, lapok, élek vagy más vázlatok metszik a vázlatsíkot. Kapcsoltak maradnak, és követik a modellt, ha az megváltozik.",
-  "help.sketch.intersection_curve": "3D görbéket hoz létre ott, ahol két test vagy lap találkozik, hozzájuk kapcsolva. Használja őket útvonalként vagy vezérgörbeként, amely követi a modellt.",
+  "help.sketch.intersection_curve": "3D görbéket hoz létre ott, ahol két test, lap vagy más vázlatok görbéi találkozik, hozzájuk kapcsolva. Használja őket útvonalként vagy vezérgörbeként, amely követi a modellt.",
  "help.sketch.isoparametric_curve": "3D görbét hoz létre egy lap U vagy V iránya mentén egy kiválasztott ponton át, a laphoz kapcsolva. Használja útvonalként vagy osztóvonalként, amely követi a felületet.",
  "help.sketch.line": "Összefüggő vonalakat rajzol pontról pontra, nyitott láncként vagy zárt körvonalként. Ez a legtöbb profil alapeszköze.",
  "help.sketch.line.midpoint": "Vonalat rajzol a felezőpontjától az egyik végéig, a másik véget tükrözve. Használja egy pontra középen álló vonalakhoz, például szimmetrikus élhez.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Mintalemez",
  "sample.vents.about": "Hornyok téglalap mintában: a sorok, oszlopok és osztás paraméterek",
  "sample.vents.name": "Szellőzőlemez",
+  "scale.per_axis": "Tengelyenként",
+  "scale.uniform": "Egyenletes",
  "search.command_keys": "Enter futtatás     Shift+Enter futtatás és nyitva tartás     Esc bezárás",
  "search.commands": "Parancsok",
  "search.design": "Ebben a tervben",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analisis Aksesibilitas",
  "cmd.inspect_center_of_mass": "Pusat Massa",
  "cmd.inspect_clearance": "Kelonggaran",
-  "cmd.inspect_colored_components": "Aktifkan Warna Komponen",
-  "cmd.inspect_colored_components_disable": "Nonaktifkan Warna Komponen",
  "cmd.inspect_compare": "Bandingkan Bodi",
  "cmd.inspect_compare_picture": "Bandingkan dengan Gambar",
  "cmd.inspect_continuity": "Analisis Kontinuitas",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Membaca path gambar SVG ke dalam sketsa, diskalakan, diputar, dan ditempatkan sesuai pengaturan Anda. Gunakan untuk mengubah logo atau kontur vektor menjadi kurva yang dapat diekstrusi.",
  "help.sketch.inspect": "Membuka laporan tentang sketsa yang terbuka: berapa derajat kebebasan yang tersisa dan apakah sketsa terbatasi penuh. Gunakan untuk mengetahui apa yang masih bergerak sebelum Anda menyelesaikan sketsa.",
  "help.sketch.intersect": "Menambahkan kurva atau titik tempat bodi, muka, tepi, atau sketsa lain memotong bidang sketsa. Semuanya tetap tertaut dan mengikuti model saat model berubah.",
-  "help.sketch.intersection_curve": "Membuat kurva 3D di tempat dua bodi atau muka bertemu, tertaut padanya. Gunakan sebagai jalur atau rel pemandu yang mengikuti model.",
+  "help.sketch.intersection_curve": "Membuat kurva 3D di tempat dua bodi, muka, atau kurva sketsa lain bertemu, tertaut padanya. Gunakan sebagai jalur atau rel pemandu yang mengikuti model.",
  "help.sketch.isoparametric_curve": "Membuat kurva 3D sepanjang arah U atau V sebuah muka melalui titik yang Anda pilih, tertaut ke muka itu. Gunakan sebagai jalur atau garis pisah yang mengikuti permukaan.",
  "help.sketch.line": "Menggambar garis-garis tersambung titik demi titik, sebagai rantai terbuka atau kontur tertutup. Ini alat dasar untuk sebagian besar profil.",
  "help.sketch.line.midpoint": "Menggambar garis dari titik tengahnya ke satu ujung, dengan ujung lainnya dicerminkan. Gunakan untuk garis yang dipusatkan pada sebuah titik, seperti tepi simetris.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Pelat Contoh",
  "sample.vents.about": "Slot dalam pola persegi panjang: baris, kolom, dan pitch adalah parameter",
  "sample.vents.name": "Pelat Ventilasi",
+  "scale.per_axis": "Per sumbu",
+  "scale.uniform": "Seragam",
  "search.command_keys": "Enter jalankan     Shift+Enter jalankan dan tetap buka     Esc tutup",
  "search.commands": "Perintah",
  "search.design": "Di desain ini",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analisi di accessibilità",
  "cmd.inspect_center_of_mass": "Centro di massa",
  "cmd.inspect_clearance": "Distanza libera",
-  "cmd.inspect_colored_components": "Attiva colori dei componenti",
-  "cmd.inspect_colored_components_disable": "Disattiva colori dei componenti",
  "cmd.inspect_compare": "Confronta corpi",
  "cmd.inspect_compare_picture": "Confronta immagine",
  "cmd.inspect_continuity": "Analisi di continuità",
@@ -1366,11 +1364,14 @@
  "dialog.computing": "Calcolo in corso… {seconds} s",
  "dialog.could_not_be_checked": "impossibile verificare",
  "dialog.custom_axis": "↖ Asse personalizzato",
+  "dialog.cylinder_face_tip": "La faccia o il vertice del modello su cui poggia il cilindro: fai clic qui, poi su di esso nella vista. Se resta vuoto, lo posizionano X, Y e Z.",
  "dialog.dimension_insert_hint": "Fai doppio clic su un’altra quota di controllo per inserirne il nome",
  "dialog.dimension_name": "Quota: {name}",
  "dialog.edit_title": "MODIFICA {title}",
  "dialog.no_shown_body": "Nessun corpo visibile da modificare: mostrane uno o scegli Nuovo corpo",
  "dialog.pattern_sketch_not_object": "Seleziona corpi o lavorazioni: uno schizzo non è nessuno dei due. Ripeti le sue curve con Ripetizione o Specchia dello schizzo stesso, oppure estrudilo prima.",
+  "dialog.primitive_point_tip": "Un punto che compila X, Y e Z: fai clic qui, poi su un vertice, uno spigolo o una faccia del modello, su un punto di uno schizzo oppure sull'origine.",
+  "dialog.reference_edge_tip": "Uno spigolo rettilineo della faccia scelta da cui si misura la distanza sotto: fai clic qui, poi sullo spigolo.",
  "dialog.select": "↖ Seleziona",
  "dialog.selected_count": "↖ Selezionati: {count}",
  "dialog.selection_constraint": "Vincolo {id}",
@@ -1392,6 +1393,7 @@
  "document.read_only_save": "Questa progettazione è stata aperta in sola lettura: salvala come nuovo file",
  "document.save_changes": "Salvare le modifiche a {name}?",
  "document.save_copy": "Salva una copia…",
+  "document.tab_unsaved_changes": "Modifiche non salvate",
  "document.unsaved_changes": "{name} contiene modifiche non salvate. Se non salvi, andranno perse.",
  "drive.rigid": "{joint} è un giunto rigido: tiene ferme le sue parti, quindi non c'è nulla da azionare. Per farle muovere, cambia il suo tipo in Modifica giunto: Rotante per ruotare, Scorrevole per scorrere, Cilindrico per entrambi.",
  "drive.stopped_by_contact": "Arrestato a {value}: {a} attraverserebbe {b}",
@@ -1623,7 +1625,7 @@
  "help.sketch.insert_svg": "Legge i tracciati di un disegno SVG in uno schizzo, scalati, ruotati e posizionati come imposti. Usalo per trasformare un logo o un contorno vettoriale in curve che puoi estrudere.",
  "help.sketch.inspect": "Apre un rapporto sullo schizzo aperto: quanti gradi di libertà restano e se è completamente vincolato. Usalo per scoprire cosa si muove ancora prima di terminare lo schizzo.",
  "help.sketch.intersect": "Aggiunge le curve o i punti in cui corpi, facce, spigoli o altri schizzi attraversano il piano dello schizzo. Restano collegati e seguono il modello quando cambia.",
-  "help.sketch.intersection_curve": "Crea curve 3D dove si incontrano due corpi o facce, collegate a essi. Usale come percorsi o guide che seguono il modello.",
+  "help.sketch.intersection_curve": "Crea curve 3D dove si incontrano due corpi, facce o curve di altri schizzi, collegate a essi. Usale come percorsi o guide che seguono il modello.",
  "help.sketch.isoparametric_curve": "Crea una curva 3D lungo la direzione U o V di una faccia passante per un punto che scegli, collegata alla faccia. Usala come percorso o linea di divisione che segue la superficie.",
  "help.sketch.line": "Disegna linee collegate punto per punto, come catena aperta o contorno chiuso. È lo strumento di base per la maggior parte dei profili.",
  "help.sketch.line.midpoint": "Disegna una linea dal suo punto medio fino a un'estremità, con l'altra estremità speculare. Usalo per linee centrate su un punto, come un bordo simmetrico.",
@@ -3811,6 +3813,8 @@
  "sample.plate.name": "Piastra di esempio",
  "sample.vents.about": "Asole in ripetizione rettangolare: righe, colonne e passo sono parametri",
  "sample.vents.name": "Piastra di ventilazione",
+  "scale.per_axis": "Per asse",
+  "scale.uniform": "Uniforme",
  "search.command_keys": "Invio esegui     Maiusc+Invio esegui e tieni aperto     Esc chiudi",
  "search.commands": "Comandi",
  "search.design": "In questo progetto",
@@ -85,6 +85,7 @@
  "Bottom Right": "右下",
  "Boundary": "境界",
  "Bounding box": "境界ボックス",
+  "Bridge": "ブリッジ",
  "CHECK": "チェック",
  "COMPONENTS": "コンポーネント",
  "CONFIGURATIONS": "構成",
@@ -628,6 +629,8 @@
  "Suppress Selected Folders": "選択したフォルダーを抑制",
  "Suppressed": "抑制",
  "Surface": "サーフェス",
+  "Surface or face": "サーフェスまたは面",
+  "Surface or faces": "サーフェスまたは面",
  "Surface, or faces to turn over": "サーフェス、または裏返す面",
  "Surfaces": "サーフェス",
  "Swap Ends": "端点を入れ替え",
@@ -641,6 +644,7 @@
  "Target": "ターゲット",
  "Target Body": "ターゲットボディ",
  "Target Face (optional)": "対象面 (オプション)",
+  "Target edges": "ターゲットのエッジ",
  "Tear": "引き裂き",
  "Technical details": "技術情報",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "破線のスケッチは保存された平面ガイドです。新しい面を選択してアタッチメントを修復してください。",
@@ -648,6 +652,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向は、軸、またはスケッチ平面上にある直線のスケッチ曲線にしてください",
  "The mirror line cannot also be mirrored": "ミラー線自体をミラーすることはできません",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "ミラー線は、原点の軸ではなく、このスケッチの直線にしてください",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "原点軸はスケッチ平面に垂直なため、平面内に線がありません",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "保存された作成元のオカレンスが見つかりません。再バインドする前に有効な作成元配置を選択してください。",
  "Then": "次を実行 (Then)",
  "These features will be deleted:": "以下のフィーチャーが削除されます:",
@@ -739,6 +744,9 @@
  "a picked edge's body is gone": "選択したエッジのボディが存在しなくなりました",
  "add a key for a joint first": "先にジョイントのキーを追加してください",
  "ai.connected_toast": "SolidCraft が {clients} で使えるようになりました。使うには再起動してください（設定 > アシスタント）。",
+  "ai.http.allow": "安全でない HTTP を許可",
+  "ai.http.confirm": "このエンドポイントで許可",
+  "ai.http.warning": "API キーと会話は暗号化されずに送信されます。ネットワークにアクセスできる人は、内容を読み取ったり改ざんしたりする可能性があります。信頼できるネットワークでのみ使用してください。",
  "ai.prefs.allow_control": "AIエージェントの接続を許可",
  "ai.prefs.allow_control_note": "ローカルチャネル（MCP）です。このコンピューターから外には何も送信しません。\n\nこのコンピューター内だけのコントロールチャンネル（127.0.0.1、ポート 27878 または次に空いているポート）を開きます。接続するプログラムは、起動のたびに作られ、あなたのユーザーアカウントだけが読める秘密のトークンも提示する必要があります。次に SolidCraft を起動したときから有効です。オフ：--control を付けて起動しない限り、何も待ち受けません。",
  "ai.prefs.availability": "利用設定",
@@ -750,6 +758,8 @@
  "ai.prefs.follow_camera": "カメラを追従",
  "ai.prefs.follow_camera_off": "カメラの自動追従はオフです。",
  "ai.prefs.follow_camera_on": "エージェントが作成するスケッチにカメラを向けます。",
+  "ai.prefs.instructions": "カスタム指示",
+  "ai.prefs.instructions_note": "各チャットの開始時に、SolidCraft 自身の指示の後に続けてエージェントへ送られます。作業の進め方や守ってほしいルールを書いてください。変更は次のチャット（接続または新しいチャット）から適用されます。",
  "ai.prefs.intro": "SolidCraftのAIエージェント。",
  "ai.prefs.make_default": "既定にする",
  "ai.prefs.no_agents": "エージェントはまだありません。追加するか、更新してインストール済みのエージェントを検索してください。",
@@ -963,8 +973,7 @@
  "cmd.inspect_analysis": "表示解析",
  "cmd.inspect_center_of_mass": "重心",
  "cmd.inspect_clearance": "クリアランス",
-  "cmd.inspect_colored_components": "コンポーネントの色分けを有効化",
-  "cmd.inspect_colored_components_disable": "コンポーネントの色分けを無効化",
+  "cmd.inspect_colored_components": "コンポーネントの色分け",
  "cmd.inspect_compare": "ボディを比較",
  "cmd.inspect_compare_picture": "参考画像と比較",
  "cmd.inspect_continuity": "連続性解析",
@@ -1081,6 +1090,9 @@
  "cmd.render.compare.divider": "レンダー比較の境界を移動",
  "cmd.render.result.discard": "レンダリング結果を破棄",
  "cmd.render.result.select": "レンダリング結果を選択",
+  "cmd.render.surface.import": "サーフェスマップをインポート",
+  "cmd.render.texture.list": "埋め込みサーフェス画像の一覧",
+  "cmd.render.texture.remove": "埋め込みサーフェス画像を削除",
  "cmd.render_aging_describe": "レイヤー式表面エイジング",
  "cmd.render_backends": "レンダリング バックエンド",
  "cmd.render_batch": "すべてのショットをレンダリング",
@@ -1296,6 +1308,7 @@
  "cmd.timeline_stop": "履歴を停止",
  "cmd.timeline_suppress": "フィーチャーを抑制",
  "cmd.ui.assistant": "アシスタントの表示切り替え",
+  "cmd.view.navigator": "カスタム ビューナビゲーター",
  "cmd.view.render_browser": "Renderブラウザー",
  "cmd.view.render_dock": "レンダードックを移動",
  "cmd.view.render_focus": "Renderフォーカス表示",
@@ -1323,6 +1336,7 @@
  "cmd.view_previous_tab": "前のタブ",
  "cmd.view_rename": "名前付きビューの名前を変更",
  "cmd.view_render_frame": "レンダーフレームガイド",
+  "cmd.view_ribbon_tabs_only": "リボンのタブのみ",
  "cmd.view_right": "右側面ビュー",
  "cmd.view_save": "新規名前付きビュー",
  "cmd.view_shots_strip": "ショットストリップ",
@@ -1394,15 +1408,22 @@
  "dialog.computing": "計算中… {seconds} 秒",
  "dialog.could_not_be_checked": "チェックできません",
  "dialog.custom_axis": "↖ カスタム軸",
+  "dialog.cylinder_face_tip": "円柱が立つモデルの面または頂点: ここをクリックしてから、ビューでそれをクリック。空のままなら X、Y、Z で配置します。",
  "dialog.dimension_insert_hint": "別の駆動寸法をクリックして名前を挿入",
  "dialog.dimension_name": "寸法: {name}",
+  "dialog.dimension_step_down": "{step} 減らす",
+  "dialog.dimension_step_expression": "増減できるのは数値だけです。式はそのまま残ります",
+  "dialog.dimension_step_up": "{step} 増やす",
  "dialog.edit_title": "{title}を編集",
  "dialog.no_shown_body": "変更できる表示中のボディがありません。ボディを表示するか、新規ボディを選択してください",
  "dialog.pattern_sketch_not_object": "ボディかフィーチャーを選んでください。スケッチはどちらでもありません。曲線はスケッチ内のパターンかミラーで繰り返すか、先に押し出してください。",
+  "dialog.primitive_point_tip": "X、Y、Z を埋める点: ここをクリックしてから、モデルの頂点、エッジ、面、スケッチの点、または原点をクリック。",
+  "dialog.reference_edge_tip": "下の距離を測る基準となる、選んだ面の直線エッジ: ここをクリックしてからエッジをクリック。",
  "dialog.select": "↖ 選択",
  "dialog.selected_count": "↖ {count} 個選択中",
  "dialog.selection_constraint": "拘束 {id}",
  "dialog.selection_external_curve": "{sketch} · 曲線 {id}",
+  "dialog.selection_external_point": "{point} · {sketch}",
  "dialog.selection_guidance": "入力欄を選んで変更します。選択済みのオブジェクトをクリックすると解除できます。Ctrl/Cmd を押しながらクリックしても切り替えられます。プレビューを確認してから OK を押してください。",
  "dialog.selection_midpoint": "中点 · {id}",
  "dialog.selection_profile": "{sketch} · プロファイル {number}",
@@ -1420,6 +1441,7 @@
  "document.read_only_save": "このデザインは読み取り専用で開かれています：新しいファイルとして保存してください",
  "document.save_changes": "{name} への変更を保存しますか？",
  "document.save_copy": "コピーを保存…",
+  "document.tab_unsaved_changes": "未保存の変更",
  "document.unsaved_changes": "{name} には保存されていない変更があります。保存しない場合、変更内容は失われます。",
  "drive.rigid": "{joint} は剛体ジョイントです。部品をその場に固定するため、駆動するものがありません。動かすには「ジョイントを編集」で種類を変更してください: 回転させるなら Revolute、スライドさせるなら Slider、両方なら Cylindrical。",
  "drive.stopped_by_contact": "{value} で停止: {a} が {b} を通り抜けてしまいます",
@@ -1440,10 +1462,16 @@
  "each rail's curves must be in one sketch": "各レールの曲線は1つのスケッチ内にある必要があります",
  "feature computation ended without a result": "フィーチャーの計算が結果なしで終了しました",
  "file.open.drawing_filter": "デザイン、CADファイル、メッシュ、図面",
+  "file.open.portal_fallback.no_portal_service": "開いたファイル選択はデスクトップのものではありません。デスクトップのファイル選択サービスが利用できません。",
+  "file.open.portal_fallback.no_session_bus": "開いたファイル選択はデスクトップのものではありません。D-Bus セッションがありません。",
+  "file.open.portal_fallback.xwayland": "開いたファイル選択はデスクトップのものではありません。XWayland ではポータルが親ウィンドウを拒否します。",
  "file_load.built": "構築済み: 全{total}フィーチャー中{built}件。",
  "file_load.converting": "ソリッドを変換中: {done}/{total}",
+  "file_load.inserted": "{name} を挿入しました",
  "file_load.inserting": "ジオメトリを挿入中",
  "file_load.link_item": "{name} ({done}/{total})",
+  "file_load.opened": "{name} を開きました",
+  "file_load.opened_in_tab": "{name} を新しいタブで開きました",
  "file_load.opening": "デザインを開いています",
  "file_load.preparing_thumbnail": "サムネイルを準備中...",
  "file_load.preparing_view": "ビューを準備中...",
@@ -1679,7 +1707,7 @@
  "help.sketch.insert_svg": "SVG 図面のパスをスケッチに読み込み、指定した位置に拡大縮小・回転して配置します。ロゴやベクター輪郭を、押し出しできる曲線にするときに使います。",
  "help.sketch.inspect": "開いているスケッチのレポートを開きます。残りの自由度と、完全に拘束されているかどうかを表示します。スケッチを終える前に、まだ動く部分を確認するときに使います。",
  "help.sketch.intersect": "ボディ、面、エッジ、ほかのスケッチがスケッチ平面と交差する曲線または点を追加します。リンクが保たれ、モデルが変わると追従します。",
-  "help.sketch.intersection_curve": "2つのボディまたは面が接する位置に、それらにリンクした 3D 曲線を作成します。モデルに追従するパスやガイドレールとして使います。",
+  "help.sketch.intersection_curve": "2つのボディ、面、またはほかのスケッチの曲線が接する位置に、それらにリンクした 3D 曲線を作成します。モデルに追従するパスやガイドレールとして使います。",
  "help.sketch.isoparametric_curve": "選んだ点を通る面の U または V 方向に沿った 3D 曲線を、面にリンクして作成します。表面に追従するパスや分割線として使います。",
  "help.sketch.line": "点を順に指定して、つながった直線を開いた連なりまたは閉じた外形として描きます。ほとんどの輪郭に使う基本のツールです。",
  "help.sketch.line.midpoint": "中点から一方の端まで直線を描き、もう一方の端は反対側に対称に作られます。対称なエッジなど、点を中心にした直線に使います。",
@@ -1785,6 +1813,7 @@
  "help.view.navigate": "左に90度回転するなど、ステップごとにビューを回転、移動、ズームします。ドラッグではなく、カメラを正確に動かすときに使います。",
  "help.view.navigation_bar": "ビューポート下部のナビゲーションバーを表示または非表示にします。広く使いたいときは非表示に、マウスでビューツールを使うときは表示にします。",
  "help.view.rename": "保存した名前付きビューの名前を変更します。ビュー自体は変わりません。",
+  "help.view.ribbon_tabs_only": "リボンをタブの行だけに折りたたみ、パネルが使っていた場所をビューに充てます。タブをクリックするとそのパネルがビューの上に表示されます。もう一度選ぶとリボン全体を表示したままにします。",
  "help.view.save": "現在のカメラ位置を名前付きビューとしてデザインに保存します。スクリーンショット用など、後で同じ角度に戻るときに使います。",
  "help.view.spin": "次のクリックまたはキー操作まで、モデルのまわりでビューを連続して周回させます。モデルをあらゆる方向から見せるときに使います。",
  "help.view.tool": "オービット、パン、ズームのカメラツールを固定し、オフにするまで左ボタンのドラッグでビューを動かせるようにします。トラックパッドや、中ボタンのないマウスで使います。",
@@ -1999,6 +2028,7 @@
  "material.selection.mixed": "異なる材料",
  "measure.at": "位置",
  "measure.item": "項目 {number}",
+  "measure.line_to_centre": "線から中心まで",
  "measure.quick_copied": "測定値をコピーしました",
  "measure.quick_copy": "クリックで測定値をコピー",
  "measure.quick_edges": "エッジ {count} 本",
@@ -2029,6 +2059,8 @@
  "nav.blender.help": "中ドラッグで回転、Shift+中ドラッグでパン、Ctrl+中ドラッグでズーム。右ドラッグではカメラは動きません。",
  "nav.creo.help": "マウスの中ボタンドラッグで回転、Shift+中ボタンで平行移動、Ctrl+中ボタンの上下ドラッグでズーム（下方向で拡大）。ホイールの回転でもズーム",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "中ボタンまたは右ボタンのドラッグは、途中でキーを押したり離したりしても、ボタンを離すまで開始時の回転・パン・ズームを続けます。オフにすると、ドラッグ中の各時点で押しているキーによって決まります。",
+  "nav.drag_keeps_mode.label": "ドラッグは開始時のナビゲーションを維持",
  "nav.free_orbit.help": "マウスと3Dマウスで、極点を越えて回転し、ロールを保ちます。\nShiftによる軸スナップは無効になります。",
  "nav.free_orbit.label": "自由回転",
  "nav.free_orbit.snap_help": "マウスと3Dマウスで両極を越えて回転でき、ロールも保持されます。オービットのドラッグ中にShiftを押すと、視線方向とロールがスナップします。",
@@ -2265,6 +2297,17 @@
  "prefs.auto_operation_note": "材料が接触する対象に応じて結合、新規ボディ、切り取りを選びます。",
  "prefs.axes": "軸",
  "prefs.axis": "軸",
+  "prefs.background_choose": "画像を選択…",
+  "prefs.background_image": "画像",
+  "prefs.background_unreadable": "背景画像を読み込めませんでした",
+  "prefs.blur_cost": "相対的な描画負荷です。バーが多いほど、通常は処理量が増えます。",
+  "prefs.blur_device": "このグラフィックスデバイスまたは描画経路では利用できません",
+  "prefs.blur_guard": "画面の応答性を保つため、ぼかしの品質を下げました。半径は変更されていません。",
+  "prefs.blur_off": "オフ",
+  "prefs.blur_reduce_transparency": "システムの透明度を下げる設定により無効です",
+  "prefs.blur_software": "ソフトウェア描画では利用できません (gpu-software)",
+  "prefs.blur_source": "このワークスペース表示では利用できません",
+  "prefs.blur_web": "このウェブ描画経路では利用できません",
  "prefs.bodies_folders": "ボディフォルダー",
  "prefs.bodies_folders_always": "常に表示",
  "prefs.bodies_folders_never": "表示しない",
@@ -2278,6 +2321,8 @@
  "prefs.browser_eye_left": "折りたたみ矢印の隣の目のアイコン",
  "prefs.browser_eye_left_note": "ブラウザーの各行の表示切り替えを、行の右端の列ではなく、以前のように折りたたみ矢印の隣に表示します。",
  "prefs.browser_reveal_on_hover": "ホバーで表示",
+  "prefs.browser_rows_start_closed": "ブラウザーの行を閉じた状態で始める",
+  "prefs.browser_rows_start_closed_note": "ブラウザーの配置とフォルダーを閉じた状態で表示するため、多数のコンポーネントを含むデザインでは最上位の行だけが表示されます。各行は矢印、「すべて展開」または「ブラウザで検索」で開きます。「ブラウザで検索」はボディまでの行だけを開き、前回の検索で開いた行を再び閉じます。3Dビューでボディを選んでもブラウザーはそのままです。オフのときはフォルダーが開いた状態で始まり、配置は「コンポーネントを最初から展開」の設定に従い、3Dビューで選ぶとブラウザーがそのボディまで開きます（以前と同じ）。",
  "prefs.browser_show_note": "「表示」はブラウザーを常に画面に表示します。「ホバーで表示」はポインターがその位置か左端の細いタブに来るまで隠し、ポインターが中にある間やそのメニューが開いている間は表示したままにします。",
  "prefs.browser_shown": "表示",
  "prefs.built_in": "組み込み",
@@ -2288,6 +2333,7 @@
  "prefs.carousel_previous": "前へ",
  "prefs.choose_font": "フォントファイルを選択…",
  "prefs.click": "クリック",
+  "prefs.command_dialog_values": "コマンドダイアログ",
  "prefs.contact_shading": "柔らかな接触陰影",
  "prefs.contact_shading_note": "部品が近接する部分に柔らかな陰影を付けます。",
  "prefs.context_menu": "コンテキストメニュー",
@@ -2323,6 +2369,13 @@
  "prefs.dialogs_edge": "ビューの端",
  "prefs.dialogs_left_column": "左の列",
  "prefs.dialogs_note": "コマンドダイアログを開く場所：ビューの端にドッキングするか、左の列でブラウザーと履歴の代わりに表示します。ダイアログを閉じるとブラウザーと履歴は元どおりに戻ります。",
+  "prefs.dimension_step_angle": "ウィンドウの矢印、上下キー、ホイールで角度に加える量",
+  "prefs.dimension_step_length": "ウィンドウの矢印、上下キー、ホイールで長さに加える量",
+  "prefs.dimension_steps": "ウィンドウの増減量",
+  "prefs.dimension_values": "寸法値の入力",
+  "prefs.dimension_values_note": "寸法値を入力する場所です。ウィンドウでは矢印で値を増減でき、寸法ツールは先に文字を配置します。",
+  "prefs.dimension_values_view": "ビュー内",
+  "prefs.dimension_values_window": "ウィンドウ",
  "prefs.display": "表示",
  "prefs.edges": "エッジと陰影",
  "prefs.extend": "拡張",
@@ -2376,6 +2429,8 @@
  "prefs.graphics_page.surfaces_edges": "サーフェスとエッジ",
  "prefs.graphics_page.view_bar": "ビューバーにも表示",
  "prefs.graphics_presets_note": "プリセットは以下の設定をまとめて変更します。",
+  "prefs.ground_shadow_follows_model": "地面の影をモデルに追従させる",
+  "prefs.ground_shadow_follows_model_help": "表示中のボディの最下部に影を配置します。オフの場合、持ち上げたモデルの影は原点を通る地面上に残ります。",
  "prefs.hide_constraint_glyphs_zoomed_out": "ズームアウト時に拘束グリフを隠す",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "スケッチを十分にズームアウトすると、拘束グリフは表示されず画面を散らかしません。オフ: ズームに関係なく固定の画面サイズのままです。",
  "prefs.history": "履歴",
@@ -2402,6 +2457,10 @@
  "prefs.invert_curved_roll_arrows_note": "キューブの隅にある2つのカーブした矢印は、画面内でビューをロールします。オン: 時計回りの矢印が反時計回りに、反時計回りの矢印が時計回りにロールします。オフ: 各矢印は、そのカーブの向きにビューをロールします。",
  "prefs.invert_navigator_arrows": "ビューキューブの回転矢印を反転",
  "prefs.invert_navigator_arrows_note": "キューブの周りの矢印が、矢印の指す方向にカメラを回します（Fusion や Inventor と同じ動き）：左の矢印は右を指し、カメラを右に振ります。オフ: 矢印は、そのある面の方へキューブを回すため、左の矢印はカメラを左に振ります。カーブしたロール矢印は影響を受けません。",
+  "prefs.keep_unsaved_also_asks": "タブを閉じるときにも確認する",
+  "prefs.keep_unsaved_also_asks_tip": "オフにすると、未保存の各デザインのコピーが最新であれば、ブラウザーの確認なしでタブが閉じます。",
+  "prefs.keep_unsaved_in_browser": "未保存の作業をこのブラウザーに保持する",
+  "prefs.keep_unsaved_in_browser_tip": "開いている各デザインの未保存の変更を、このブラウザーのプライベートストレージに常に最新の状態で保持します。次回のアクセス時に復元を提案します。",
  "prefs.keep_work_on_tab_switch": "デザインを切り替えてもダイアログとツールを開いたままにする",
  "prefs.keep_work_on_tab_switch_note": "各デザインのタブが、開いているダイアログまたはツール（選択や入力した内容を含む）とツールバーのタブを保持します。デザインに戻ると元のまま表示されます。オフ: デザインを切り替えるとそれらはキャンセルされ、モデル タブが表示されます。",
  "prefs.labels": "ラベル",
@@ -2413,6 +2472,8 @@
  "prefs.layout_page.card": "カード",
  "prefs.layout_page.column": "列",
  "prefs.layout_page.hover": "ホバー時",
+  "prefs.layout_page.hover_panel_menus": "ポイントしてパネルメニューを切り替える",
+  "prefs.layout_page.hover_panel_menus_help": "リボンのパネル名をクリックしてメニューを開きます。別のパネル名にポインターを合わせると切り替わります。リボンと開いているメニューの外に移動すると閉じます。",
  "prefs.layout_page.icons_labels": "アイコン＋ラベル",
  "prefs.layout_page.ok_cancel": "OK とキャンセル",
  "prefs.layout_page.on_hover": "ホバー時",
@@ -2515,6 +2576,8 @@
  "prefs.quality_smoother": "より滑らか",
  "prefs.quick_measure": "ビューの隅にクイック測定",
  "prefs.quick_measure_note": "選択したものの寸法をビューの右下、履歴の上に表示します: エッジの長さ（円形のものは Ø と R）、面の面積、点の位置、2 つの項目の距離と角度、複数のエッジや面の合計。クリックでコピーします。",
+  "prefs.remember_dialog_values": "コマンドダイアログの値を記憶",
+  "prefs.remember_dialog_values.help": "既定ではオフです。オンにすると、コマンドが成功した後、SolidCraft を閉じるまで、同じコマンドを次に開いたときに安全な値とオプションを再利用します。",
  "prefs.render_previous_geometry_budget": "レンダープレビューで以前のジオメトリ予算を使用",
  "prefs.render_previous_geometry_budget_help": "デバイスに基づく予算の代わりに、以前の固定ジオメトリ上限（64ビットデスクトップでは512 MiB、その他では128 MiB）に戻します。",
  "prefs.reports_saved": "{n} 件保存済み",
@@ -2523,6 +2586,8 @@
  "prefs.ribbon_click_ends_tool_note": "使用中のスケッチツールの点灯したリボンボタンをクリックするとツールが終了し、ビューのクリックで再び選択できます。オフ: クリックするとツールが最初から開始されます。",
  "prefs.ribbon_reveal": "検索結果をリボンに表示",
  "prefs.ribbon_reveal_note": "コマンド検索で結果にポインターを合わせると、そのコマンドがリボンのどこにあるか（タブ、ボタン、またはパネルのドロップダウン内の行）を表示します。検索から開始したコマンドはそこで点滅し、ドロップダウンから実行中のコマンドはそのパネルに印が付きます。",
+  "prefs.ribbon_tabs_only": "リボンのタブだけを表示",
+  "prefs.ribbon_tabs_only_note": "リボンをタブの行だけに折りたたみます。タブをクリックすると、コマンドが始まるかポインターが離れるまで、そのパネルがビューの上に表示されます。表示タブの「リボンのタブのみ」またはそのショートカットで切り替えます。",
  "prefs.right_click": "右クリック",
  "prefs.saving": "起動と保存",
  "prefs.scale_note": "ウィンドウ内では Ctrl + / Ctrl − でも変更できます。100% のボタンは 28 px です。",
@@ -2533,6 +2598,8 @@
  "prefs.section_hatch_by_part": "部品ごと",
  "prefs.section_hatch_one": "単一スタイル",
  "prefs.select": "選択",
+  "prefs.select_hidden_edges": "隠線表示で隠れた辺を選択する",
+  "prefs.select_hidden_edges_help": "「Shaded with hidden edges」で面の向こうの辺を選択し、Filletにも使用できます。オフではv0.30.1相当の選択動作になります。非表示のボディは選択対象になりません。",
  "prefs.select_one_item": "項目を 1 つ選択",
  "prefs.select_other_hidden": "「他を選択」で非表示のジオメトリを選択",
  "prefs.select_other_hidden_help": "オン: ポインター付近の非表示のボディやスケッチ、遮られたエッジを含めます。オフ: ポインター直下の表示中のジオメトリだけを元のリストに表示します。",
@@ -2557,6 +2624,8 @@
  "prefs.sketch.click_selects": "クリックで選択",
  "prefs.sketch.conflict_colour": "競合色",
  "prefs.sketch.drawing": "作図",
+  "prefs.sketch.ellipse_axes": "楕円を軸と一緒に描く",
+  "prefs.sketch.ellipse_axes_note": "長軸と短軸をコンストラクション線として描き、半軸と軸に寸法を付けられるようにします。オフ: 楕円のみを描き、D で短半径を寸法にします。値をどこへ引いても、これまでどおり R 付きで描かれます。",
  "prefs.sketch.exit_keep": "維持",
  "prefs.sketch.exit_previous": "開始前のビューに戻る",
  "prefs.sketch.exit_unless_rotated": "回転した場合を除く",
@@ -2650,6 +2719,10 @@
  "prefs.theme_follow_off": "オフ",
  "prefs.theme_follow_stop": "追従を停止",
  "prefs.theme_import_hint": "クリックしてテーマファイルを選ぶか、ここにドロップするか、テーマをコピーした状態で Ctrl+V（Mac では Cmd+V）を押します",
+  "prefs.theme_notice_dismiss": "非表示",
+  "prefs.theme_option_blur": "パネル背面のぼかし",
+  "prefs.theme_option_blur_help": "半透明パネルの背面のぼかしを物理ピクセル単位で指定します。0でオフになります。",
+  "prefs.theme_option_invalid": "{option} の保存値が無効なため、テーマの既定値を使用します。保存値は保持されます。",
  "prefs.theme_option_opacity": "不透明度",
  "prefs.theme_option_opacity_help": "フローティングパネルの不透明度を調整します。ビューポートの色に重なっても文字が読めるように下限が適用されます。",
  "prefs.theme_option_tab_colours": "タブの色",
@@ -2658,6 +2731,7 @@
  "prefs.theme_option_tab_fade_ms_help": "タブの切り替え時にパネルとビューポートの色を徐々に変えます。0で即座に切り替えます。",
  "prefs.theme_options_badge": "オプション",
  "prefs.theme_options_more": "その他 · {count}",
+  "prefs.theme_options_newer": "このテーマには新しいバージョンの SolidCraft が必要です。更新後、元のテーマを再インポートしてオプション定義を復元してください。",
  "prefs.theme_options_reset": "リセット",
  "prefs.theme_options_unavailable": "このデバイスでは利用できません",
  "prefs.theme_paste": "テーマを貼り付け",
@@ -2721,6 +2795,12 @@
  "recovery.just_now": "たった今",
  "recovery.min_ago": "{count}分前",
  "recovery.never_saved": "未保存",
+  "recovery.open_saved": "保存済みのバージョンを開く",
+  "recovery.restore": "復元",
+  "recovery.restore_intro": "このページを前回閉じたときに保存されていなかった変更は、このブラウザーに保持されています。",
+  "recovery.restore_row": "{name}、{when}に変更",
+  "recovery.restore_title": "未保存のデザインを復元しますか？",
+  "recovery.restore_title_one": "未保存のデザイン {name}（{when}に変更）を復元しますか？",
  "refused.change": "{body} を変更できませんでした。",
  "refused.cut": "{body} をカットできませんでした。",
  "refused.face_curved": "曲面の 1 つがモデリングに使えません。",
@@ -3242,9 +3322,11 @@
  "render.frame_wide": "16:9 · ワイドスクリーン",
  "render.gpu_depth": "最大パス深度",
  "render.gpu_options_help": "サンプル数、深度、シード、露出をこの設定に保存します。保存するのは選択中の画像方式だけです。",
+  "render.gpu_path_crashed": "前回このグラフィックアダプターでの準備中に SolidCraft が終了しました。グラフィックドライバー内で終了した可能性が高いため、自動では再度準備しません。代わりに CPU レイトレーシングを使うか、もう一度試してください（ドライバーを更新した場合も再試行されます）。",
  "render.gpu_path_failed": "GPUパストレーサーを利用できません",
  "render.gpu_path_first_setup": "このGPUでの初回セットアップには数分かかることがあります。その間もSolidCraftは使用できます。以降の起動では、ドライバーが保持していればコンパイル済みのシェーダーを再利用します。",
  "render.gpu_path_preparing": "GPUパストレーサー：シェーダーをコンパイル中…",
+  "render.gpu_path_retry": "もう一度試す",
  "render.gpu_seed": "乱数シード",
  "render.gpu_unavailable": "このデバイスでは GPU パストレーシングの準備ができていません。",
  "render.ground_apply": "床をフィットして保存",
@@ -3858,6 +3940,7 @@
  "render.stage_panels.extent": "範囲",
  "render.stage_panels.fit_save": "フィットして保存",
  "render.stage_panels.gpu_required": "GPUパストレーシングが必要です",
+  "render.stage_panels.grain_angle": "木目の角度",
  "render.stage_panels.keep": "保持",
  "render.stage_panels.kept": "保持",
  "render.stage_panels.kept_fields": "カメラ、サンプリング、画像寸法、光学設定、CAD形状、工学的特性。",
@@ -3976,6 +4059,19 @@
  "render.subsurface_enable": "内部散乱ランダムウォーク",
  "render.subsurface_help": "閉じた誘電体専用。散乱とRGB吸収は別々の毎mm係数です。実際の形状内で散乱し、境界で屈折・反射します。直線透過影、表面ノイズ除去、外部ボリュームを無効にし、フレネル層数を1にします。拡散シェーダー、密度グリッド、実測物性ではありません。高密度ではサンプル数と深度が必要です。",
  "render.subsurface_rate": "散乱衝突率",
+  "render.surface_import.author": "作者",
+  "render.surface_import.busy": "画像をインポート中…",
+  "render.surface_import.complete": "画像を選び、作者、出典、ライセンスを入力してください。",
+  "render.surface_import.embedded": "インポートした画像",
+  "render.surface_import.failed": "画像のインポートが完了しませんでした。",
+  "render.surface_import.license": "ライセンス / 所有権",
+  "render.surface_import.raytrace_required": "画像にはCPUまたはGPUのレイトレーシングが必要です。出力で選択してください。",
+  "render.surface_import.repeat_u": "U方向の繰り返し",
+  "render.surface_import.repeat_v": "V方向の繰り返し",
+  "render.surface_import.save": "ボディに画像を保存",
+  "render.surface_import.saved_cpu": "CPUレンダリングで使うにはマップを保存してください。",
+  "render.surface_import.source": "出典",
+  "render.surface_import.title": "画像をインポート",
  "render.tone_aces_fitted": "ACES近似",
  "render.tone_reinhard": "Reinhard",
  "render.transmission_scope": "GPUガラスは検証された非交差媒体に対応します。無制限の入れ子媒体やノイズのない透過推定器は提供しません。",
@@ -4052,6 +4148,8 @@
  "sample.plate.name": "サンプル プレート",
  "sample.vents.about": "矩形パターンに並んだスロット: 行数、列数、ピッチはパラメータ",
  "sample.vents.name": "通気プレート",
+  "scale.per_axis": "軸ごと",
+  "scale.uniform": "均等",
  "search.command_keys": "Enter 実行     Shift+Enter 実行して開いたままにする     Esc 閉じる",
  "search.commands": "コマンド",
  "search.design": "このデザイン内",
@@ -4142,6 +4240,32 @@
  "sketch.dof_left": "残り自由度 {count}",
  "sketch.dof_left_one": "残り自由度 {count}",
  "sketch.draw_curves": "{linetype}として描く",
+  "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+  "sketch.error.nothing_to_break": "nothing to break here",
+  "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+  "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+  "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+  "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+  "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+  "sketch.hint.break": "Break: click a curve where it should split",
+  "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+  "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+  "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+  "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+  "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+  "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+  "sketch.hint.fallback": "Click in the sketch",
+  "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+  "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+  "sketch.hint.open_done": "Open done",
+  "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+  "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+  "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+  "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+  "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+  "sketch.hint.slot": "Slot: click both ends, then the width",
+  "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+  "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
  "sketch.make_selection": "選択を{linetype}にする",
  "sketch.open_ends": "開放 {count}",
  "sketch.status_conflict": "拘束が競合しています",
@@ -4363,6 +4487,7 @@
  "ui.3d_sketch": "3D スケッチ",
  "ui.activate": "アクティブ化",
  "ui.active_component": "アクティブなコンポーネント",
+  "ui.addToQuickAccess": "クイックアクセスに追加",
  "ui.add_configuration": "構成を追加",
  "ui.add_parameter": "パラメーターを追加",
  "ui.agent_chat": "エージェントチャット",
@@ -4697,6 +4822,7 @@
  "ui.click_selects_whole_bodies": "クリックでボディ全体を選択",
  "ui.click_then_press_key": "クリックした後、割り当てるキーを押してください",
  "ui.close": "閉じる",
+  "ui.close_tab": "タブを閉じる",
  "ui.coil": "コイル",
  "ui.coincident": "一致",
  "ui.collapse": "折りたたむ",
@@ -4784,6 +4910,7 @@
  "ui.default_modelling_orientation": "モデリングのデフォルト方向",
  "ui.delete": "削除",
  "ui.delete_select_first": "先に削除するものを選択してください: フィーチャ、ボディ、コンポーネント、スケッチ ジオメトリ",
+  "ui.dependents_select_first": "先に、依存先を表示する対象を選択してください",
  "ui.depth": "深さ",
  "ui.design": "デザイン",
  "ui.design_properties.author": "作成者",
@@ -4913,6 +5040,11 @@
  "ui.factor": "倍率",
  "ui.fade": "切り上げ",
  "ui.fade_length": "切り上げ長さ",
+  "ui.fair_iterations": "反復回数",
+  "ui.fair_keep_edges": "エッジを保持",
+  "ui.fair_strength": "強度",
+  "ui.fair_surface_title": "サーフェスフェアリング",
+  "ui.fair_tolerance_default": "ボディサイズの 0.001 倍",
  "ui.feature_history": "フィーチャー履歴",
  "ui.feature_options": "フィーチャーオプション",
  "ui.features": "フィーチャー",
@@ -4941,6 +5073,10 @@
  "ui.fillet_setback_least": "{least} より大きく",
  "ui.fillet_setback_tip": "なめらかなコーナーパッチが始まる位置: コーナーから各エッジに沿った距離。既定値は半径の {factor} 倍。最小セットバック (セットバックなしでラウンド同士が交わる位置。面どうしが直角なら半径) より大きくする必要があります。",
  "ui.fillet_smooth_radius": "半径をなめらかに変化",
+  "ui.fillet_turn": "曲がり角",
+  "ui.fillet_turn_mitre": "留め継ぎ",
+  "ui.fillet_turn_swept": "回転",
+  "ui.fillet_turn_tip": "2 つのフィレットが間にある鋭いコーナーエッジを回り込む所（ボスの根元のフィレットが立ち上がりエッジを回る所など）。\n留め継ぎ: フィレットは延びて留め継ぎで出会います。\n回転: フィレットはコーナーエッジで止まり、その周りを回ります。コーナーは両方に接するトーラスです。同じ半径のフィレットが、まっすぐな凸のコーナーエッジを回る場合のみ。",
  "ui.fillet_type_choices_tip": "一定の半径: エッジ全体で一つの半径。\n弦長: 面がどんな角度で交わっても、フィレットの幅が同じ。\n可変半径: 両端の半径と、追加すればエッジ沿いの半径。\n曲率連続: 平面と接する所で映り込みが折れない断面 (G2)。\nスプライン: エッジ沿いの半径が、設定した制御半径に従います。",
  "ui.fillet_type_curvature": "曲率連続",
  "ui.fillet_type_tip": "エッジを横切る断面。曲率連続: 平面の間の曲率連続 (G2) 断面で、映り込みが面からフィレットへ折れずにつながります。",
@@ -4986,6 +5122,7 @@
  "ui.heading_construct": "構築",
  "ui.heading_create": "作成",
  "ui.heading_create_sketch": "スケッチを作成",
+  "ui.heading_custom_view_navigator": "カスタム ビューナビゲーター",
  "ui.heading_cylinder": "円柱",
  "ui.heading_design": "デザイン",
  "ui.heading_draft": "勾配",
@@ -5093,6 +5230,7 @@
  "ui.inspect": "検査",
  "ui.instances": "インスタンス",
  "ui.intersect": "交差",
+  "ui.intersection_curve_second_pick": "交差曲線: 2 つ目の面または曲線をクリックします (右クリックでやり直し)",
  "ui.iso_4753": "ISO 4753",
  "ui.isolate": "分離表示",
  "ui.join": "結合",
@@ -5121,6 +5259,7 @@
  "ui.manipulator_free_alt": "マニピュレータのフリードラッグを Alt/Option でも有効",
  "ui.manipulator_free_alt_tip": "オン: 押し出し/ギズモ矢印で Alt/Option または Ctrl/Cmd が値スナップを無効にします。オフ: Ctrl/Cmd のみ。",
  "ui.manufacture": "製造",
+  "ui.match_surface_title": "サーフェス一致",
  "ui.material_review.axes": "材料ローカル軸。ボディの方向は割り当てません。",
  "ui.material_review.claims": "出典とライセンスの申告は未確認です。欠落値は不明のままです。",
  "ui.material_review.compressive_strength": "圧縮強度",
@@ -5143,6 +5282,9 @@
  "ui.material_review.title": "物理材料データを確認",
  "ui.material_review.unknown": "不明",
  "ui.material_review.yield_strength": "降伏強度",
+  "ui.mcp_agents": "MCP 経由のエージェント",
+  "ui.mcp_compact": "コンパクトな出力",
+  "ui.mcp_compact_note": "MCP サーバー (solidcraft-cli mcp) 経由で接続したエージェント向け: inspect_design はスケッチを要約し、ツールの結果は整形されないため、トークンが少なくて済みます。変更後に開始したエージェントのセッションから適用されます。--compact または SOLIDCRAFT_MCP_COMPACT=1 でも有効になります。",
  "ui.measure": "計測",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "面タグ付き 3MF",
@@ -5184,6 +5326,7 @@
  "ui.options": "オプション",
  "ui.orbit": "回転",
  "ui.orbit_around": "回転中心",
+  "ui.organize": "整理",
  "ui.orientation": "向き",
  "ui.origin": "原点",
  "ui.palette_construction_mode": "補助線モード (X)",
@@ -5228,6 +5371,7 @@
  "ui.point_cloud_add_filter": "フィルターを追加…",
  "ui.point_cloud_auto_range": "範囲を自動設定",
  "ui.point_cloud_color_by": "色の付け方",
+  "ui.point_cloud_dots": "単独の点",
  "ui.point_cloud_file_colors": "ファイルの色",
  "ui.point_cloud_filter_by": "フィルター",
  "ui.point_cloud_height_high": "最高の高さ",
@@ -5272,6 +5416,7 @@
  "ui.quality": "品質",
  "ui.quantity": "数量",
  "ui.quantity_2": "数量 2",
+  "ui.quick_access_full": "クイックアクセスバーに置けるコマンドは {count} 個までです。追加するには 1 つ削除してください",
  "ui.quit": "終了",
  "ui.radial_context_menu": "パイ メニュー",
  "ui.radius": "半径",
@@ -5289,6 +5434,7 @@
  "ui.relink_not_linked": "このコンポーネントは参照元の設計にリンクされていません。",
  "ui.relink_select_one": "リンクされたコンポーネントまたはそのインスタンスを1つ選択してください。",
  "ui.relink_source_all": "参照元を再リンク（すべてのインスタンス）…",
+  "ui.removeFromQuickAccess": "クイックアクセスから削除",
  "ui.removeFromToolbar": "ツールバーから削除",
  "ui.removeSection": "セクションを解除",
  "ui.render": "レンダリング",
@@ -5297,6 +5443,8 @@
  "ui.repeat_nothing": "まだ繰り返すものがありません。先にツールかダイアログを開始してください。",
  "ui.replace_with_link_done": "コピーはリンクされたデザインの配置になりました。",
  "ui.report_a_bug": "不具合を報告",
+  "ui.report_characters_left_one": "残り {count} 文字",
+  "ui.report_characters_left_other": "残り {count} 文字",
  "ui.reset": "リセット",
  "ui.reset_all": "すべてリセット",
  "ui.reset_the_settings_on_this_page": "このページの設定をリセット",
@@ -5581,6 +5729,14 @@
  "values must be numbers or expressions": "値は数値または式にしてください",
  "view.auto_ortho_faces": "回転中は透視投影、面を正面に見ると平行投影",
  "view.render_inspector": "レンダーインスペクター",
+  "view_gizmo.arrows": "回転矢印",
+  "view_gizmo.home": "ホーム ボタン",
+  "view_gizmo.no_such_body": "このデザインにその名前のボディはありません。",
+  "view_gizmo.note": "ビューでボディを選択してください。ボディは環境設定と設定プロファイルに保存され、すべてのデザインで表示されます。面をクリックすると、その面を正面から見ます。",
+  "view_gizmo.texture": "テクスチャ",
+  "view_gizmo.themed": "テーマ",
+  "view_gizmo.too_detailed": "ビューナビゲーターには細かすぎます (10,000 三角形を超えています)",
+  "view_gizmo.too_thin": "ビューナビゲーターには細長すぎます: 最も薄い辺が最も長い辺の 5 分の 1 以上である必要があります",
  "web.files.insert_drawings_hint": "CADファイル、メッシュ、DXF、SVGを開いているデザインに挿入",
  "web.files.insert_stored_drawings_hint": "開いているデザインに挿入（CADファイル、メッシュ、DXF、SVG）",
  "web.open_full": "SolidCraft で開く",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analisis Kebolehcapaian",
  "cmd.inspect_center_of_mass": "Pusat Jisim",
  "cmd.inspect_clearance": "Kelegaan",
-  "cmd.inspect_colored_components": "Aktifkan Warna Komponen",
-  "cmd.inspect_colored_components_disable": "Nyahaktifkan Warna Komponen",
  "cmd.inspect_compare": "Bandingkan Jasad",
  "cmd.inspect_compare_picture": "Banding dengan Imej",
  "cmd.inspect_continuity": "Analisis Keselanjaran",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Membaca laluan lukisan SVG ke dalam lakaran, diskalakan, diputar dan diletakkan mengikut tetapan anda. Gunakan untuk menukar logo atau garis luar vektor kepada lengkung yang boleh disemperit.",
  "help.sketch.inspect": "Membuka laporan tentang lakaran yang terbuka: berapa banyak darjah kebebasan yang tinggal dan sama ada ia terkekang sepenuhnya. Gunakan untuk mengetahui apa yang masih bergerak sebelum anda menamatkan lakaran.",
  "help.sketch.intersect": "Menambah lengkung atau titik tempat jasad, muka, tepi atau lakaran lain melintasi satah lakaran. Ia kekal terpaut dan mengikut model apabila model berubah.",
-  "help.sketch.intersection_curve": "Mencipta lengkung 3D tempat dua jasad atau muka bertemu, terpaut kepadanya. Gunakan sebagai laluan atau rel pemandu yang mengikut model.",
+  "help.sketch.intersection_curve": "Mencipta lengkung 3D tempat dua jasad, muka atau lengkung lakaran lain bertemu, terpaut kepadanya. Gunakan sebagai laluan atau rel pemandu yang mengikut model.",
  "help.sketch.isoparametric_curve": "Mencipta lengkung 3D di sepanjang arah U atau V muka melalui titik yang anda pilih, terpaut kepada muka itu. Gunakan sebagai laluan atau garis belahan yang mengikut permukaan.",
  "help.sketch.line": "Melukis garis bersambung titik demi titik, sebagai rantaian terbuka atau garis luar tertutup. Ia ialah alat asas bagi kebanyakan profil.",
  "help.sketch.line.midpoint": "Melukis garis daripada titik tengahnya ke satu hujung, dengan hujung satu lagi dicerminkan. Gunakan untuk garis yang berpusat pada satu titik, seperti tepi simetri.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Plat Contoh",
  "sample.vents.about": "Corak slot segi empat tepat: baris, lajur dan pic sebagai parameter",
  "sample.vents.name": "Plat Pengudaraan",
+  "scale.per_axis": "Mengikut paksi",
+  "scale.uniform": "Seragam",
  "search.command_keys": "Enter jalankan     Shift+Enter jalankan dan kekalkan terbuka     Esc tutup",
  "search.commands": "Arahan",
  "search.design": "Dalam reka bentuk ini",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Tilgjengelighetsanalyse",
  "cmd.inspect_center_of_mass": "Massesenter",
  "cmd.inspect_clearance": "Klaring",
-  "cmd.inspect_colored_components": "Aktiver komponentfarger",
-  "cmd.inspect_colored_components_disable": "Deaktiver komponentfarger",
  "cmd.inspect_compare": "Sammenlign kropper",
  "cmd.inspect_compare_picture": "Sammenlign bilde",
  "cmd.inspect_continuity": "Kontinuitetsanalyse",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Leser banene fra en SVG-tegning inn i en skisse, skalert, dreid og plassert slik du angir. Bruk det til å gjøre en logo eller vektorkontur om til kurver du kan ekstrudere.",
  "help.sketch.inspect": "Åpner en rapport om den åpne skissen: hvor mange frihetsgrader som gjenstår og om den er fullstendig bundet. Bruk det til å finne ut hva som fortsatt beveger seg før du fullfører skissen.",
  "help.sketch.intersect": "Legger til kurvene eller punktene der kropper, flater, kanter eller andre skisser krysser skisseplanet. De forblir koblet og følger modellen når den endres.",
-  "help.sketch.intersection_curve": "Oppretter 3D-kurver der to kropper eller flater møtes, koblet til dem. Bruk dem som baner eller føringskurver som følger modellen.",
+  "help.sketch.intersection_curve": "Oppretter 3D-kurver der to kropper, flater eller kurver fra andre skisser møtes, koblet til dem. Bruk dem som baner eller føringskurver som følger modellen.",
  "help.sketch.isoparametric_curve": "Oppretter en 3D-kurve langs U- eller V-retningen til en flate gjennom et punkt du velger, koblet til flaten. Bruk den som en bane eller delelinje som følger flaten.",
  "help.sketch.line": "Tegner sammenhengende linjer punkt for punkt, som en åpen kjede eller en lukket kontur. Det er det grunnleggende verktøyet for de fleste profiler.",
  "help.sketch.line.midpoint": "Tegner en linje fra midtpunktet og ut til den ene enden, med den andre enden speilet. Bruk det til linjer sentrert på et punkt, for eksempel en symmetrisk kant.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Eksempelplate",
  "sample.vents.about": "Spor i et rektangulært mønster: rader, kolonner og stigning er parametere",
  "sample.vents.name": "Ventilasjonsplate",
+  "scale.per_axis": "Per akse",
+  "scale.uniform": "Jevn",
  "search.command_keys": "Enter kjør     Shift+Enter kjør og behold åpen     Esc lukk",
  "search.commands": "Kommandoer",
  "search.design": "I dette designet",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Toegankelijkheidsanalyse",
  "cmd.inspect_center_of_mass": "Zwaartepunt",
  "cmd.inspect_clearance": "Speling",
-  "cmd.inspect_colored_components": "Componentkleuren inschakelen",
-  "cmd.inspect_colored_components_disable": "Componentkleuren uitschakelen",
  "cmd.inspect_compare": "Lichamen vergelijken",
  "cmd.inspect_compare_picture": "Afbeelding vergelijken",
  "cmd.inspect_continuity": "Continuïteitsanalyse",
@@ -1368,6 +1366,9 @@
  "dialog.custom_axis": "↖ Aangepaste as",
  "dialog.dimension_insert_hint": "Klik op een andere aandrijvende maat om de naam ervan in te voegen",
  "dialog.dimension_name": "Maat: {name}",
+  "dialog.dimension_step_down": "{step} omlaag",
+  "dialog.dimension_step_expression": "Alleen een getal verspringt; een uitdrukking blijft zoals ingevoerd",
+  "dialog.dimension_step_up": "{step} omhoog",
  "dialog.edit_title": "{title} BEWERKEN",
  "dialog.no_shown_body": "Geen zichtbaar lichaam om te wijzigen: toon er een of kies Nieuw lichaam",
  "dialog.pattern_sketch_not_object": "Kies lichamen of kenmerken: een schets is geen van beide. Herhaal de curven ervan met het eigen Patroon of Spiegelen van de schets, of extrudeer de schets eerst.",
@@ -1392,6 +1393,7 @@
  "document.read_only_save": "Dit ontwerp is alleen-lezen geopend: sla het op als nieuw bestand",
  "document.save_changes": "Wijzigingen in {name} opslaan?",
  "document.save_copy": "Kopie opslaan…",
+  "document.tab_unsaved_changes": "Niet-opgeslagen wijzigingen",
  "document.unsaved_changes": "{name} heeft niet-opgeslagen wijzigingen. Als u niet opslaat, gaan ze verloren.",
  "drive.rigid": "{joint} is een starre verbinding: die houdt zijn onderdelen vast en heeft dus niets om aan te sturen. Wijzig het type in Verbinding bewerken om ze te laten bewegen: Draaiend om te draaien, Schuivend om te schuiven, Cilindrisch voor beide.",
  "drive.stopped_by_contact": "Gestopt bij {value}: {a} zou door {b} heen gaan",
@@ -1623,7 +1625,7 @@
  "help.sketch.insert_svg": "Leest de paden van een SVG-tekening in een schets, geschaald, gedraaid en geplaatst waar je instelt. Gebruik dit om een logo of vectorcontour om te zetten in curven die je kunt extruderen.",
  "help.sketch.inspect": "Opent een rapport over de geopende schets: hoeveel vrijheidsgraden er nog over zijn en of hij volledig beperkt is. Gebruik dit om te zien wat nog beweegt voordat je de schets voltooit.",
  "help.sketch.intersect": "Voegt de curven of punten toe waar lichamen, vlakken, randen of andere schetsen het schetsvlak kruisen. Ze blijven gekoppeld en volgen het model wanneer dat verandert.",
-  "help.sketch.intersection_curve": "Maakt 3D-curven waar twee lichamen of vlakken samenkomen, eraan gekoppeld. Gebruik ze als paden of geleiders die het model volgen.",
+  "help.sketch.intersection_curve": "Maakt 3D-curven waar twee lichamen, vlakken of curven van andere schetsen samenkomen, eraan gekoppeld. Gebruik ze als paden of geleiders die het model volgen.",
  "help.sketch.isoparametric_curve": "Maakt een 3D-curve langs de U- of V-richting van een vlak door een punt dat je kiest, gekoppeld aan het vlak. Gebruik dit als pad of splitslijn die het oppervlak volgt.",
  "help.sketch.line": "Tekent verbonden lijnen punt voor punt, als open keten of gesloten contour. Het is het basisgereedschap voor de meeste profielen.",
  "help.sketch.line.midpoint": "Tekent een lijn vanuit zijn middelpunt naar één uiteinde, waarbij het andere uiteinde wordt gespiegeld. Gebruik dit voor lijnen die op een punt zijn gecentreerd, zoals een symmetrische rand.",
@@ -2194,6 +2196,13 @@
  "prefs.dialogs_edge": "Aan de rand van de weergave",
  "prefs.dialogs_left_column": "In de linkerkolom",
  "prefs.dialogs_note": "Waar opdrachtdialogen openen: vastgezet aan de rand van de weergave, of in de linkerkolom in plaats van de browser en de geschiedenis, die terugkomen zoals ze waren wanneer de dialoog sluit.",
+  "prefs.dimension_step_angle": "Wat de pijlen van het venster, Omhoog/Omlaag en het wieltje bij een hoek optellen",
+  "prefs.dimension_step_length": "Wat de pijlen van het venster, Omhoog/Omlaag en het wieltje bij een lengte optellen",
+  "prefs.dimension_steps": "Stappen in het venster",
+  "prefs.dimension_values": "Maatwaarden",
+  "prefs.dimension_values_note": "Waar de waarde van een maat wordt ingevoerd. Een venster heeft pijlen die de waarde laten verspringen; het maatgereedschap plaatst eerst de tekst.",
+  "prefs.dimension_values_view": "In de weergave",
+  "prefs.dimension_values_window": "In een venster",
  "prefs.display": "Weergave",
  "prefs.edges": "Randen en schaduwing",
  "prefs.extend": "Verlengen",
@@ -3809,6 +3818,8 @@
  "sample.plate.name": "Voorbeeldplaat",
  "sample.vents.about": "Sleuven in een rechthoekig patroon: rijen, kolommen en spoed zijn parameters",
  "sample.vents.name": "Ventilatieplaat",
+  "scale.per_axis": "Per as",
+  "scale.uniform": "Uniform",
  "search.command_keys": "Enter uitvoeren     Shift+Enter uitvoeren en open houden     Esc sluiten",
  "search.commands": "Opdrachten",
  "search.design": "In dit ontwerp",
@@ -934,8 +934,6 @@
  "cmd.inspect_accessibility": "Analiza dostępności",
  "cmd.inspect_center_of_mass": "Środek masy",
  "cmd.inspect_clearance": "Prześwit",
-  "cmd.inspect_colored_components": "Włącz kolory komponentów",
-  "cmd.inspect_colored_components_disable": "Wyłącz kolory komponentów",
  "cmd.inspect_compare": "Porównaj bryły",
  "cmd.inspect_continuity": "Analiza ciągłości",
  "cmd.inspect_curvature_comb": "Analiza grzebienia krzywizny",
@@ -1347,6 +1345,7 @@
  "document.read_only_save": "Ten projekt otwarto tylko do odczytu: zapisz go jako nowy plik",
  "document.save_changes": "Zapisać zmiany w {name}?",
  "document.save_copy": "Zapisz kopię…",
+  "document.tab_unsaved_changes": "Niezapisane zmiany",
  "document.unsaved_changes": "{name} ma niezapisane zmiany. Jeśli ich nie zapiszesz, zostaną utracone.",
  "drive.rigid": "{joint} to złącze sztywne: utrzymuje swoje części nieruchomo, więc nie ma czym sterować. Aby mogły się poruszać, zmień jego typ w Edytuj złącze: Obrotowe do obrotu, Przesuwne do przesuwu, Walcowe do obu.",
  "drive.stopped_by_contact": "Zatrzymano przy {value}: {a} przeszedłby przez {b}",
@@ -1985,6 +1984,8 @@
  "prefs.shortcuts": "Skróty",
  "prefs.single_surface_analysis": "Używaj jednej analizy powierzchni",
  "prefs.single_surface_analysis_help": "Gdy wyłączone, cieniowanie powierzchni i Ciągłość mogą być włączone jednocześnie. Włączenie zachowuje ostatnio uruchomioną lub zmienioną analizę.",
+  "prefs.sketch.ellipse_axes": "Rysuj elipsy z osiami",
+  "prefs.sketch.ellipse_axes_note": "Oś wielka i mała jako linie konstrukcyjne, aby można było wymiarować półosie i osie. Wyłączone: sama elipsa, a D na niej daje promień małej półosi, gdziekolwiek przeciągnąć wartość, rysowany i oznaczony R jak dotąd.",
  "prefs.sketch_align_points": "Wyrównuj do innych punktów szkicu podczas rysowania",
  "prefs.sketch_align_points_note": "Podczas rysowania punkt wyrównuje się jednocześnie poziomo z jednym punktem szkicu i pionowo z innym, z kropkowaną linią pomocniczą, a kliknięcie zachowuje oba wyrównania. Wyłączone: tylko z poprzednim punktem, po jednej osi.",
  "prefs.sketch_conflict_colour": "Geometria w konflikcie w kolorze konfliktu",
@@ -1408,6 +1408,8 @@
  "sample.plate.name": "Placa de exemplo",
  "sample.vents.about": "Rasgos em padrão retangular: linhas, colunas e passo são parâmetros",
  "sample.vents.name": "Placa de ventilação",
+  "scale.per_axis": "Por eixo",
+  "scale.uniform": "Uniforme",
  "search.command_keys": "Enter executar     Shift+Enter executar e manter aberto     Esc fechar",
  "search.commands": "Comandos",
  "search.design": "Neste projeto",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Analiza accesibilității",
  "cmd.inspect_center_of_mass": "Centru de masă",
  "cmd.inspect_clearance": "Joc",
-  "cmd.inspect_colored_components": "Activează culorile componentelor",
-  "cmd.inspect_colored_components_disable": "Dezactivează culorile componentelor",
  "cmd.inspect_compare": "Compară corpurile",
  "cmd.inspect_compare_picture": "Compară imaginea",
  "cmd.inspect_continuity": "Analiza continuității",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Citește traseele unui desen SVG într-o schiță, scalate, rotite și plasate așa cum stabiliți. Folosiți-o pentru a transforma un logo sau un contur vectorial în curbe pe care le puteți extruda.",
  "help.sketch.inspect": "Deschide un raport despre schița deschisă: câte grade de libertate au rămas și dacă este complet constrânsă. Folosiți-l pentru a afla ce se mai mișcă înainte de a finaliza schița.",
  "help.sketch.intersect": "Adaugă curbele sau punctele în care corpuri, fețe, muchii sau alte schițe taie planul schiței. Rămân legate și urmează modelul când acesta se schimbă.",
-  "help.sketch.intersection_curve": "Creează curbe 3D acolo unde se întâlnesc două corpuri sau fețe, legate de ele. Folosiți-le ca trasee sau ghidaje care urmează modelul.",
+  "help.sketch.intersection_curve": "Creează curbe 3D acolo unde se întâlnesc două corpuri, fețe sau curbe ale altor schițe, legate de ele. Folosiți-le ca trasee sau ghidaje care urmează modelul.",
  "help.sketch.isoparametric_curve": "Creează o curbă 3D pe direcția U sau V a unei fețe, printr-un punct ales de dumneavoastră, legată de față. Folosiți-o ca traseu sau linie de separare care urmează suprafața.",
  "help.sketch.line": "Desenează linii conectate punct cu punct, ca lanț deschis sau contur închis. Este instrumentul de bază pentru majoritatea profilurilor.",
  "help.sketch.line.midpoint": "Desenează o linie de la mijlocul ei spre un capăt, celălalt capăt fiind în oglindă. Folosiți-o pentru linii centrate pe un punct, de exemplu o muchie simetrică.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Placă exemplu",
  "sample.vents.about": "Canale într-o matrice dreptunghiulară: rândurile, coloanele și pasul sunt parametri",
  "sample.vents.name": "Placă de ventilație",
+  "scale.per_axis": "Pe axe",
+  "scale.uniform": "Uniform",
  "search.command_keys": "Enter execută     Shift+Enter execută și păstrează deschis     Esc închide",
  "search.commands": "Comenzi",
  "search.design": "În acest proiect",
@@ -182,6 +182,8 @@
  "Designs you open or save appear here.": "Здесь появляются открытые и сохранённые дизайны.",
  "Determined by To Object. Choose Angle to edit the angular extent.": "Определяется параметром «До объекта». Выберите «Угол», чтобы задать угловой предел.",
  "Diameter": "Диаметр",
+  "Did this assembly open the wrong way up?": "Эта сборка открылась не той стороной вверх?",
+  "Did this part open the wrong way up?": "Эта деталь открылась не той стороной вверх?",
  "Dimension new shapes": "Проставлять размеры новых фигур",
  "Direction": "Направление",
  "Discard": "Отменить",
@@ -606,6 +608,7 @@
  "Square": "Квадрат",
  "Stand it up": "Поставить вертикально",
  "Stand it up: a quarter turn about X, as one Move feature you can undo.": "Поставить вертикально: четверть оборота вокруг X одной операцией «Переместить», которую можно отменить.",
+  "Stand this assembly up?": "Поставить эту сборку вертикально?",
  "Stand this part up?": "Поставить эту деталь вертикально?",
  "Start angle": "Начальный угол",
  "Start bulge": "Выпуклость в начале",
@@ -644,6 +647,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Направление должно быть осью или прямолинейной кривой эскиза, лежащей в плоскости эскиза",
  "The mirror line cannot also be mirrored": "Линию зеркала нельзя одновременно отражать",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "Линия зеркала должна быть прямолинейной кривой этого эскиза, а не осью начала координат",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "Ось начала координат перпендикулярна плоскости эскиза, поэтому линии в этой плоскости нет",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "Сохранённое исходное вхождение отсутствует. Выберите корректное исходное положение перед перепривязкой.",
  "Then": "Затем",
  "These features will be deleted:": "Эти операции будут удалены:",
@@ -953,8 +957,6 @@
  "cmd.inspect_accessibility": "Анализ доступности",
  "cmd.inspect_center_of_mass": "Центр масс",
  "cmd.inspect_clearance": "Зазор",
-  "cmd.inspect_colored_components": "Включить цвета компонентов",
-  "cmd.inspect_colored_components_disable": "Отключить цвета компонентов",
  "cmd.inspect_compare": "Сравнить тела",
  "cmd.inspect_compare_picture": "Сравнить с изображением",
  "cmd.inspect_continuity": "Анализ непрерывности",
@@ -1356,6 +1358,7 @@
  "dialog.dimension_insert_hint": "Дважды щёлкните другой управляющий размер, чтобы вставить его имя",
  "dialog.dimension_name": "Размер: {name}",
  "dialog.edit_title": "ИЗМЕНИТЬ: {title}",
+  "dialog.no_shown_body": "Нет отображаемого тела для изменения: покажите тело или выберите «Новое тело»",
  "dialog.pattern_sketch_not_object": "Выберите тела или операции: эскиз — ни то, ни другое. Повторите его кривые собственным инструментом «Массив» или «Зеркало» в эскизе либо сначала выдавите его.",
  "dialog.select": "↖ Выбрать",
  "dialog.selected_count": "↖ Выбрано: {count}",
@@ -1608,7 +1611,7 @@
  "help.sketch.insert_svg": "Читает контуры рисунка SVG в эскиз, масштабируя, поворачивая и размещая их так, как вы зададите. Используйте, чтобы превратить логотип или векторный контур в кривые, которые можно выдавить.",
  "help.sketch.inspect": "Открывает отчёт об открытом эскизе: сколько осталось степеней свободы и определён ли он полностью. Используйте, чтобы выяснить, что ещё двигается, прежде чем завершить эскиз.",
  "help.sketch.intersect": "Добавляет кривые или точки, где тела, грани, рёбра или другие эскизы пересекают плоскость эскиза. Они остаются связанными и следуют за моделью при её изменении.",
-  "help.sketch.intersection_curve": "Создаёт 3D-кривые там, где встречаются два тела или две грани, связанные с ними. Используйте как траектории или направляющие, следующие за моделью.",
+  "help.sketch.intersection_curve": "Создаёт 3D-кривые там, где встречаются два тела, две грани или кривые других эскизов, связанные с ними. Используйте как траектории или направляющие, следующие за моделью.",
  "help.sketch.isoparametric_curve": "Создаёт 3D-кривую вдоль направления U или V грани через выбранную точку, связанную с гранью. Используйте как траекторию или линию разделения, следующую за поверхностью.",
  "help.sketch.line": "Рисует соединённые линии точка за точкой, как открытую цепочку или замкнутый контур. Это основной инструмент для большинства профилей.",
  "help.sketch.line.midpoint": "Рисует линию от её середины до одного конца, второй конец отражается зеркально. Используйте для линий с центром в точке, например симметричного ребра.",
@@ -1717,6 +1720,8 @@
  "help.view.spin": "Непрерывно вращает вид вокруг модели до следующего щелчка или нажатия клавиши. Используйте, чтобы показать модель со всех сторон.",
  "help.view.tool": "Закрепляет инструмент камеры (орбиту, панорамирование или масштаб), так что перетаскивание левой кнопкой мыши двигает вид, пока вы его не отключите. Используйте на трекпаде или без средней кнопки мыши.",
  "help.view.visual_style": "Переключает способ отрисовки модели: тонированная с рёбрами или без них, каркас или со скрытыми рёбрами. Используйте каркас, чтобы заглянуть внутрь, а тонированный вид — для чистого вида.",
+  "history.sketch_under_constrained": "Недоопределён (степеней свободы: {count})",
+  "history.sketch_under_constrained_one": "Недоопределён ({count} степень свободы)",
  "hole_presets.confirm_delete": "Подтвердить удаление",
  "hole_presets.delete": "Удалить",
  "hole_presets.delete_prompt": "Удалить этот личный пресет? Существующие отверстия не изменятся.",
@@ -2128,6 +2133,8 @@
  "prefs.anti_aliasing_note": "Сглаживает неровные края.",
  "prefs.applies_on_restart": "Применяется после перезапуска",
  "prefs.assistant": "Ассистент",
+  "prefs.auto_operation": "Выбирать операцию автоматически",
+  "prefs.auto_operation_note": "Выбор «Объединить», «Новое тело» или «Вырезать» по тому, чего касается материал.",
  "prefs.axes": "Оси",
  "prefs.axis": "Ось",
  "prefs.bodies_folders": "Папки тел",
@@ -2349,6 +2356,8 @@
  "prefs.sketch_selection": "Эскиз и выделение",
  "prefs.sketch_selection_heading": "Эскиз и выделение",
  "prefs.sketch_selection_note": "Как работает привязка в эскизах и как щелчки выделяют объекты.",
+  "prefs.sketch_state_icons": "Значки эскизов в цвете их состояния",
+  "prefs.sketch_state_icons_note": "В истории и браузере значок эскиза принимает цвет его состояния (недоопределён, полностью определён или с конфликтом), а подсказка называет это состояние. Выкл.: у всех эскизов одинаковый значок.",
  "prefs.sketch_tab_always": "Всегда показывать вкладку «Эскиз»",
  "prefs.sketch_tab_always_note": "Вкладка «Эскиз» остаётся на ленте сразу после «Модель», пока не открыт ни один эскиз. Её инструменты рисования создают эскиз на выбранной плоскости или грани либо на плоскости, которую вы выберете следом, и сразу включают нужный инструмент.",
  "prefs.sketch_tracking_guides": "Направляющие выравнивания по центру и середине",
@@ -2360,6 +2369,11 @@
  "prefs.source": "Источник",
  "prefs.speed": "Скорость",
  "prefs.stand_up_note": "После открытия файла STEP или IGES с осью Z вверх предлагать повернуть его на четверть оборота вокруг X.",
+  "prefs.stand_up_unknown": "Для файлов из неизвестных программ",
+  "prefs.stand_up_unknown.ask": "Спрашивать в диалоговом окне",
+  "prefs.stand_up_unknown.note": "Показывать уведомление",
+  "prefs.stand_up_unknown.off": "Не предлагать",
+  "prefs.stand_up_unknown_note": "Как делается предложение, когда в файле не указана известная программа.",
  "prefs.status_bar": "Строка состояния",
  "prefs.status_bar_note": "Тонкая полоса вдоль нижнего края окна показывает, что изменяется, состояние открытого эскиза его цветом и единицы дизайна; щелчок по единицам изменяет их. Состояние эскиза при этом больше не показывается в углу вида.",
  "prefs.status_done": "Готово",
@@ -3737,6 +3751,8 @@
  "sample.plate.name": "Образец пластины",
  "sample.vents.about": "Пазы в прямоугольном массиве: число рядов, столбцов и шаг заданы параметрами",
  "sample.vents.name": "Вентиляционная пластина",
+  "scale.per_axis": "По осям",
+  "scale.uniform": "Равномерно",
  "search.command_keys": "Enter выполнить     Shift+Enter выполнить и оставить открытым     Esc закрыть",
  "search.commands": "Команды",
  "search.design": "В этом дизайне",
@@ -3863,7 +3879,7 @@
  "status.navigation": "Назначение кнопок мыши: {mapping}",
  "status.navigation_tip": "Как мышь двигает вид. Щёлкните, чтобы выбрать другое назначение",
  "status.under_constrained": "Недоопределён (степеней свободы: {count})",
-  "status.under_constrained_one": "Недоопределён (степеней свободы: {count})",
+  "status.under_constrained_one": "Недоопределён ({count} степень свободы)",
  "status.units_tip": "Единицы дизайна. Щёлкните, чтобы изменить",
  "the angle must be a number": "угол должен быть числом",
  "the curves must be in one sketch": "кривые должны быть в одном эскизе",
@@ -3902,8 +3918,10 @@
  "timeline.move_to_group": "Переместить операции в папку",
  "timeline.rename_group": "Переименовать папку операций",
  "timeline.reorder_many": "Изменить порядок операций",
+  "timeline.suppress_features": "Подавить операции",
  "timeline.suppress_folders_tip": "Подавить или снять подавление со всех операций в папках и вложенных папках",
  "timeline.ungroup": "Убрать папки операций",
+  "timeline.unsuppress_features": "Снять подавление с операций",
  "to the face": "до грани",
  "to the next face": "до следующей грани",
  "toolbar.customize_note": "Вкладка {tab}. Отметьте команду, чтобы добавить её кнопку на панель инструментов. Можно также перетащить строку из выпадающего меню панели на панель инструментов, перетащить кнопку за пределы панели для удаления или использовать значок закрепления в строке выпадающего меню.",
@@ -4349,6 +4367,8 @@
  "ui.cancel": "Отмена",
  "ui.canvases": "Подложки",
  "ui.center": "Центр",
+  "ui.center_arc_follows_cursor": "Дуга из центра следует направлению курсора",
+  "ui.center_arc_follows_cursor_tip": "Дуга из центра идёт по часовой стрелке или против неё — в ту сторону, в которую курсор обходит её центр. Выкл.: всегда против часовой стрелки от начальной точки.",
  "ui.centerline": "Осевая линия",
  "ui.chain": "Цепочка",
  "ui.chamfer": "Фаска",
@@ -5160,11 +5180,13 @@
  "update.installed": "SolidCraft {version} установлен. Перезапустите, чтобы использовать его.",
  "update.installer_started": "Установщик запустится после закрытия SolidCraft.",
  "update.later": "Напомнить позже",
+  "update.managed": "Доступно обновление: обновите SolidCraft в {manager}",
  "update.no_notes": "У этого выпуска нет примечаний.",
  "update.package_hint": "Эта копия установлена из {kind}. Скачайте новый пакет, затем установите его командой:",
  "update.prefs_dev": "Это сборка для разработки ({version}): она не проверяет обновления.",
  "update.prefs_flatpak": "Эту копию ({version}) обновляет Flatpak: выполните {command} или воспользуйтесь центром приложений. SolidCraft не проверяет обновления.",
  "update.prefs_label": "Обновления",
+  "update.prefs_managed": "Это SolidCraft {version}, которым управляет {manager}. Проверка запрашивает у GitHub последний релиз и больше ничего не отправляет; обновляйте SolidCraft в {manager}.",
  "update.prefs_note": "Это SolidCraft {version} ({kind}). При проверке у GitHub запрашивается последний выпуск, больше ничего не отправляется.",
  "update.prefs_web": "Перезагрузите страницу, чтобы получить последнюю версию веб-приложения. Если сеть недоступна или обновление не успевает загрузиться, открывается сохранённая версия; незавершённая загрузка продолжится до следующей перезагрузки.",
  "update.refresh_checking": "Проверка наличия новейшего выпуска…",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Анализа доступности",
  "cmd.inspect_center_of_mass": "Центар масе",
  "cmd.inspect_clearance": "Провера зазора",
-  "cmd.inspect_colored_components": "Омогући боје компоненти",
-  "cmd.inspect_colored_components_disable": "Онемогући боје компоненти",
  "cmd.inspect_compare": "Упореди тела",
  "cmd.inspect_compare_picture": "Упореди слику",
  "cmd.inspect_continuity": "Анализа континуитета",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Учитава путање SVG цртежа у скицу, скалиране, окренуте и постављене како зададете. Користите га да логотип или векторски обрис претворите у криве које можете екструдирати.",
  "help.sketch.inspect": "Отвара извештај о отвореној скици: колико је степени слободе остало и да ли је потпуно ограничена. Користите га да сазнате шта се још помера пре него што завршите скицу.",
  "help.sketch.intersect": "Додаје криве или тачке у којима тела, лица, ивице или друге скице секу раван скице. Оне остају повезане и прате модел када се он промени.",
-  "help.sketch.intersection_curve": "Прави 3D криве тамо где се два тела или лица састају, повезане са њима. Користите их као путање или водилице које прате модел.",
+  "help.sketch.intersection_curve": "Прави 3D криве тамо где се два тела, лица или криве других скица састају, повезане са њима. Користите их као путање или водилице које прате модел.",
  "help.sketch.isoparametric_curve": "Прави 3D криву дуж U или V смера лица кроз тачку коју изаберете, повезану са лицем. Користите је као путању или линију поделе која прати површ.",
  "help.sketch.line": "Црта повезане линије тачку по тачку, као отворени ланац или затворени обрис. То је основни алат за већину профила.",
  "help.sketch.line.midpoint": "Црта линију од њене средишње тачке до једног краја, а други крај се пресликава. Користите је за линије центриране на тачки, на пример за симетричну ивицу.",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Tillgänglighetsanalys",
  "cmd.inspect_center_of_mass": "Masscentrum",
  "cmd.inspect_clearance": "Frigång",
-  "cmd.inspect_colored_components": "Aktivera komponentfärger",
-  "cmd.inspect_colored_components_disable": "Inaktivera komponentfärger",
  "cmd.inspect_compare": "Jämför kroppar",
  "cmd.inspect_compare_picture": "Jämför bild",
  "cmd.inspect_continuity": "Kontinuitetsanalys",
@@ -1392,6 +1390,7 @@
  "document.read_only_save": "Den här konstruktionen öppnades skrivskyddad: spara den som en ny fil",
  "document.save_changes": "Spara ändringar i {name}?",
  "document.save_copy": "Spara en kopia…",
+  "document.tab_unsaved_changes": "Osparade ändringar",
  "document.unsaved_changes": "{name} har osparade ändringar. Om du inte sparar går de förlorade.",
  "drive.rigid": "{joint} är ett stelt led: det håller sina delar stilla och har därför inget att driva. Om delarna ska kunna röra sig, ändra ledets typ i Redigera led: Roterande för att rotera, Glidande för att glida, Cylindrisk för båda.",
  "drive.stopped_by_contact": "Stoppade vid {value}: {a} skulle gå igenom {b}",
@@ -1623,7 +1622,7 @@
  "help.sketch.insert_svg": "Läser in banorna från en SVG-ritning i en skiss, skalade, vridna och placerade där du anger. Använd det för att göra en logotyp eller en vektorkontur till kurvor som du kan extrudera.",
  "help.sketch.inspect": "Öppnar en rapport om den öppna skissen: hur många frihetsgrader som återstår och om den är fullt definierad. Använd det för att ta reda på vad som fortfarande rör sig innan du avslutar skissen.",
  "help.sketch.intersect": "Lägger till de kurvor eller punkter där kroppar, ytor, kanter eller andra skisser korsar skissplanet. De förblir länkade och följer modellen när den ändras.",
-  "help.sketch.intersection_curve": "Skapar 3D-kurvor där två kroppar eller ytor möts, länkade till dem. Använd dem som banor eller styrkurvor som följer modellen.",
+  "help.sketch.intersection_curve": "Skapar 3D-kurvor där två kroppar, ytor eller kurvor från andra skisser möts, länkade till dem. Använd dem som banor eller styrkurvor som följer modellen.",
  "help.sketch.isoparametric_curve": "Skapar en 3D-kurva längs en ytas U- eller V-riktning genom en punkt som du väljer, länkad till ytan. Använd den som en bana eller delningslinje som följer ytan.",
  "help.sketch.line": "Ritar sammanhängande linjer punkt för punkt, som en öppen kedja eller en sluten kontur. Det är det grundläggande verktyget för de flesta profiler.",
  "help.sketch.line.midpoint": "Ritar en linje från dess mittpunkt ut till ena änden, med den andra änden speglad. Använd det för linjer centrerade på en punkt, till exempel en symmetrisk kant.",
@@ -3809,6 +3808,8 @@
  "sample.plate.name": "Exempelplatta",
  "sample.vents.about": "Spår i ett rektangulärt mönster: rader, kolumner och delning är parametrar",
  "sample.vents.name": "Ventilationsplatta",
+  "scale.per_axis": "Per axel",
+  "scale.uniform": "Likformig",
  "search.command_keys": "Enter kör     Shift+Enter kör och behåll öppen     Esc stäng",
  "search.commands": "Kommandon",
  "search.design": "I denna konstruktion",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "Erişilebilirlik analizi",
  "cmd.inspect_center_of_mass": "Kütle merkezi",
  "cmd.inspect_clearance": "Açıklık",
-  "cmd.inspect_colored_components": "Bileşen Renklerini Etkinleştir",
-  "cmd.inspect_colored_components_disable": "Bileşen Renklerini Devre Dışı Bırak",
  "cmd.inspect_compare": "Gövdeleri karşılaştır",
  "cmd.inspect_compare_picture": "Görüntüyle karşılaştır",
  "cmd.inspect_continuity": "Süreklilik kontrolü",
@@ -1623,7 +1621,7 @@
  "help.sketch.insert_svg": "Bir SVG çiziminin yollarını, belirlediğiniz ölçekte, açıda ve konumda bir eskize okur. Bir logoyu veya vektör dış hattını ekstrüzyon yapabileceğiniz eğrilere dönüştürmek için kullanın.",
  "help.sketch.inspect": "Açık eskiz için bir rapor açar: kaç serbestlik derecesi kaldığını ve tam kısıtlı olup olmadığını. Eskizi bitirmeden önce nelerin hâlâ hareket ettiğini öğrenmek için kullanın.",
  "help.sketch.intersect": "Gövdelerin, yüzlerin, kenarların veya diğer eskizlerin eskiz düzlemini kestiği eğrileri ya da noktaları ekler. Bağlı kalır ve model değiştiğinde onu izler.",
-  "help.sketch.intersection_curve": "İki gövdenin veya yüzün buluştuğu yerde, onlara bağlı 3B eğriler oluşturur. Bunları modeli izleyen yollar veya kılavuz raylar olarak kullanın.",
+  "help.sketch.intersection_curve": "İki gövdenin, yüzün veya diğer eskizlerin eğrilerinin buluştuğu yerde, onlara bağlı 3B eğriler oluşturur. Bunları modeli izleyen yollar veya kılavuz raylar olarak kullanın.",
  "help.sketch.isoparametric_curve": "Bir yüzün U veya V yönü boyunca, seçtiğiniz bir noktadan geçen ve yüze bağlı bir 3B eğri oluşturur. Yüzeyi izleyen bir yol veya bölme çizgisi olarak kullanın.",
  "help.sketch.line": "Bağlantılı çizgileri nokta nokta, açık bir zincir veya kapalı bir dış hat olarak çizer. Çoğu profil için temel araçtır.",
  "help.sketch.line.midpoint": "Bir çizgiyi orta noktasından bir uca doğru çizer; diğer uç yansıtılır. Bir nokta etrafında ortalanmış çizgiler, örneğin simetrik bir kenar için kullanın.",
@@ -3809,6 +3807,8 @@
  "sample.plate.name": "Örnek plaka",
  "sample.vents.about": "Dikdörtgen desende yuvalar: satırlar, sütunlar ve aralık parametredir",
  "sample.vents.name": "Havalandırma plakası",
+  "scale.per_axis": "Eksen başına",
+  "scale.uniform": "Tekdüze",
  "search.command_keys": "Enter çalıştır     Shift+Enter çalıştır ve açık tut     Esc kapat",
  "search.commands": "Komutlar",
  "search.design": "Bu tasarımda",
@@ -85,6 +85,7 @@
  "Bottom Right": "Dưới cùng bên phải",
  "Boundary": "Biên dạng bao",
  "Bounding box": "Hộp bao ngoài",
+  "Bridge": "Cầu nối",
  "CHECK": "KIỂM TRA",
  "COMPONENTS": "CHI TIẾT",
  "CONFIGURATIONS": "CẤU HÌNH",
@@ -628,6 +629,8 @@
  "Suppress Selected Folders": "Bỏ kích hoạt các thư mục đã chọn",
  "Suppressed": "Bị tạm nén",
  "Surface": "Bề mặt",
+  "Surface or face": "Bề mặt hoặc mặt",
+  "Surface or faces": "Bề mặt hoặc các mặt",
  "Surface, or faces to turn over": "Mặt cong, hoặc các mặt cần lật hướng",
  "Surfaces": "Các bề mặt",
  "Swap Ends": "Hoán đổi hai đầu",
@@ -641,6 +644,7 @@
  "Target": "Mục tiêu",
  "Target Body": "Khối mục tiêu",
  "Target Face (optional)": "Mặt đích (tùy chọn)",
+  "Target edges": "Các cạnh đích",
  "Tear": "Xé rách mép chấn",
  "Technical details": "Chi tiết kỹ thuật",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "Phác thảo nét đứt là đường dẫn mặt phẳng đã lưu. Hãy chọn một bề mặt mới để sửa lại liên kết.",
@@ -648,6 +652,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "Hướng phải là một trục hoặc một đường cong phác thảo thẳng nằm trong mặt phẳng phác thảo",
  "The mirror line cannot also be mirrored": "Đường đối xứng không thể đồng thời được lấy đối xứng",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "Đường đối xứng phải là một đường cong thẳng của phác thảo này, không phải trục gốc",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "Trục gốc vuông góc với mặt phẳng phác thảo nên không có đường thẳng trong mặt phẳng này",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "Bản thể tác giả đã lưu bị thiếu. Hãy chọn một vị trí tác giả hợp lệ trước khi gán lại.",
  "Then": "Thì",
  "These features will be deleted:": "Các tính năng sau sẽ bị xóa:",
@@ -739,6 +744,9 @@
  "a picked edge's body is gone": "thân của một cạnh đã chọn không còn nữa",
  "add a key for a joint first": "hãy thêm một khóa cho khớp trước",
  "ai.connected_toast": "SolidCraft hiện đã sẵn sàng trong {clients}. Khởi động lại ứng dụng để sử dụng (Cài đặt > Trợ lý ảo).",
+  "ai.http.allow": "Cho phép HTTP không bảo mật",
+  "ai.http.confirm": "Cho phép với điểm cuối này",
+  "ai.http.warning": "Khóa API và cuộc trò chuyện sẽ được gửi mà không mã hóa. Bất kỳ ai có quyền truy cập mạng đều có thể đọc hoặc thay đổi chúng. Chỉ sử dụng trên mạng mà bạn tin cậy.",
  "ai.prefs.allow_control": "Cho phép tác nhân AI kết nối",
  "ai.prefs.allow_control_note": "Kênh cục bộ (MCP). Không có gì rời khỏi máy tính này.\n\nMở kênh điều khiển chỉ trên máy tính này (127.0.0.1, cổng 27878 hoặc cổng trống tiếp theo). Chương trình kết nối phải xuất trình mã token bảo mật chỉ tài khoản người dùng của bạn đọc được, được tạo mới mỗi lần khởi động. Có hiệu lực vào lần khởi động tiếp theo của SolidCraft. Khi tắt: không lắng nghe trừ khi bạn bật.",
  "ai.prefs.availability": "Khả dụng",
@@ -750,6 +758,8 @@
  "ai.prefs.follow_camera": "Theo camera",
  "ai.prefs.follow_camera_off": "Tự động xoay camera theo phác thảo đang tắt.",
  "ai.prefs.follow_camera_on": "Camera sẽ tự động xoay vuông góc với phác thảo do agent tạo.",
+  "ai.prefs.instructions": "Hướng dẫn tùy chỉnh",
+  "ai.prefs.instructions_note": "Được gửi cho agent khi bắt đầu mỗi cuộc trò chuyện, sau hướng dẫn riêng của SolidCraft: cách bạn muốn làm việc, các quy tắc cần tuân theo. Thay đổi có hiệu lực từ cuộc trò chuyện tiếp theo (Kết nối hoặc Cuộc trò chuyện mới).",
  "ai.prefs.intro": "Tác nhân AI trong SolidCraft.",
  "ai.prefs.make_default": "Đặt làm mặc định",
  "ai.prefs.no_agents": "Chưa có agent nào. Thêm một agent hoặc làm mới để tìm các agent đã cài đặt.",
@@ -963,8 +973,7 @@
  "cmd.inspect_analysis": "Phân tích khung nhìn",
  "cmd.inspect_center_of_mass": "Trọng tâm",
  "cmd.inspect_clearance": "Khoảng cách an toàn",
-  "cmd.inspect_colored_components": "Bật màu cụm chi tiết",
-  "cmd.inspect_colored_components_disable": "Tắt màu cụm chi tiết",
+  "cmd.inspect_colored_components": "Màu cụm chi tiết",
  "cmd.inspect_compare": "So sánh các thân khối",
  "cmd.inspect_compare_picture": "So sánh với ảnh tham chiếu",
  "cmd.inspect_continuity": "Phân tích độ liên tục mặt",
@@ -1081,6 +1090,9 @@
  "cmd.render.compare.divider": "Di chuyển vạch so sánh kết xuất",
  "cmd.render.result.discard": "Bỏ kết quả kết xuất",
  "cmd.render.result.select": "Chọn kết quả kết xuất",
+  "cmd.render.surface.import": "Nhập bản đồ bề mặt",
+  "cmd.render.texture.list": "Liệt kê ảnh bề mặt được nhúng",
+  "cmd.render.texture.remove": "Xóa ảnh bề mặt được nhúng",
  "cmd.render_aging_describe": "Lão hóa bề mặt phân lớp",
  "cmd.render_backends": "Kết xuất hình ảnh Sauends",
  "cmd.render_batch": "Kết xuất mọi cảnh chụp",
@@ -1296,6 +1308,7 @@
  "cmd.timeline_stop": "Dừng lịch sử",
  "cmd.timeline_suppress": "Tạm nén tính năng",
  "cmd.ui.assistant": "Bật/tắt trợ lý",
+  "cmd.view.navigator": "Khối điều hướng góc nhìn tùy chỉnh",
  "cmd.view.render_browser": "Trình duyệt kết xuất",
  "cmd.view.render_dock": "Di chuyển neo kết xuất",
  "cmd.view.render_focus": "Chế độ xem tập trung kết xuất",
@@ -1323,6 +1336,7 @@
  "cmd.view_previous_tab": "Thẻ trước",
  "cmd.view_rename": "Đổi tên góc nhìn đã lưu",
  "cmd.view_render_frame": "Đường dẫn khung kết xuất",
+  "cmd.view_ribbon_tabs_only": "Chỉ các thẻ ribbon",
  "cmd.view_right": "Góc nhìn bên phải",
  "cmd.view_save": "Tạo góc nhìn đã lưu mới",
  "cmd.view_shots_strip": "Dải cảnh chụp",
@@ -1394,15 +1408,22 @@
  "dialog.computing": "Đang tính toán… {seconds} s",
  "dialog.could_not_be_checked": "không thể kiểm tra",
  "dialog.custom_axis": "↖ Trục tùy chỉnh",
+  "dialog.cylinder_face_tip": "Bề mặt hoặc đỉnh của mô hình mà khối trụ đứng trên đó: nhấp vào đây, sau đó nhấp vào nó trong khung nhìn. Để trống thì X, Y và Z đặt vị trí.",
  "dialog.dimension_insert_hint": "Nhấp vào một kích thước điều khiển khác để chèn tên của nó",
  "dialog.dimension_name": "Kích thước: {name}",
+  "dialog.dimension_step_down": "Giảm {step}",
+  "dialog.dimension_step_expression": "Chỉ số mới thay đổi theo bước; biểu thức giữ nguyên như đã nhập",
+  "dialog.dimension_step_up": "Tăng {step}",
  "dialog.edit_title": "CHỈNH SỬA {title}",
  "dialog.no_shown_body": "Không có thân khối đang hiển thị để thay đổi: hãy hiển thị một thân khối, hoặc chọn “Tạo mới Thân khối”",
  "dialog.pattern_sketch_not_object": "Hãy chọn thân khối hoặc tính năng: bản phác thảo không phải là cả hai. Lặp lại các đường cong của nó bằng Mảng hoặc Lấy đối xứng trong chính bản phác thảo, hoặc đùn khối nó trước.",
+  "dialog.primitive_point_tip": "Một điểm điền vào X, Y và Z: nhấp vào đây, sau đó nhấp vào một đỉnh, cạnh hoặc bề mặt của mô hình, một điểm của bản phác thảo, hoặc gốc tọa độ.",
+  "dialog.reference_edge_tip": "Một cạnh thẳng của bề mặt đã chọn, từ đó đo khoảng cách bên dưới: nhấp vào đây, sau đó nhấp vào cạnh.",
  "dialog.select": "↖ Chọn",
  "dialog.selected_count": "↖ {count} đã chọn",
  "dialog.selection_constraint": "Ràng buộc {id}",
  "dialog.selection_external_curve": "{sketch} · đường cong {id}",
+  "dialog.selection_external_point": "{point} · {sketch}",
  "dialog.selection_guidance": "Chọn một mục đầu vào để thay đổi. Nhấp vào đối tượng đã chọn để bỏ chọn; Ctrl/Cmd-nhấp để bật/tắt chọn. Xem trước kết quả, sau đó nhấn OK.",
  "dialog.selection_midpoint": "Trung điểm · {id}",
  "dialog.selection_profile": "{sketch} · biên dạng {number}",
@@ -1420,6 +1441,7 @@
  "document.read_only_save": "Thiết kế này được mở ở chế độ chỉ đọc: hãy lưu thành tệp mới",
  "document.save_changes": "Lưu các thay đổi đối với {name}?",
  "document.save_copy": "Lưu bản sao…",
+  "document.tab_unsaved_changes": "Thay đổi chưa lưu",
  "document.unsaved_changes": "{name} có các thay đổi chưa lưu. Nếu không lưu, các thay đổi sẽ bị mất.",
  "drive.rigid": "{joint} là khớp nối cứng: nó giữ cố định các chi tiết, nên không có gì để dẫn động. Để các chi tiết chuyển động, hãy đổi loại khớp nối trong “Chỉnh sửa khớp nối”: Revolute để xoay, Slider để trượt, Cylindrical cho cả hai.",
  "drive.stopped_by_contact": "Đã dừng tại {value}: {a} sẽ xuyên qua {b}",
@@ -1440,10 +1462,16 @@
  "each rail's curves must be in one sketch": "các đường cong của mỗi đường dẫn hướng phải nằm trong cùng một phác thảo",
  "feature computation ended without a result": "việc tính toán đặc trưng kết thúc mà không có kết quả",
  "file.open.drawing_filter": "Thiết kế, tệp CAD, lưới đa giác và bản vẽ",
+  "file.open.portal_fallback.no_portal_service": "Bộ chọn tệp đã mở không phải của riêng desktop: dịch vụ chọn tệp của desktop không khả dụng.",
+  "file.open.portal_fallback.no_session_bus": "Bộ chọn tệp đã mở không phải của riêng desktop: không có bus phiên D-Bus.",
+  "file.open.portal_fallback.xwayland": "Bộ chọn tệp đã mở không phải của riêng desktop: dưới XWayland, portal từ chối cửa sổ cha.",
  "file_load.built": "Đã dựng được: {built} trên {total} tính năng.",
  "file_load.converting": "Đang chuyển đổi khối đặc {done} trên {total}",
+  "file_load.inserted": "Đã chèn {name}",
  "file_load.inserting": "Đang chèn hình học",
  "file_load.link_item": "{name} ({done} trên {total})",
+  "file_load.opened": "Đã mở {name}",
+  "file_load.opened_in_tab": "Đã mở {name} trong thẻ mới",
  "file_load.opening": "Đang mở thiết kế",
  "file_load.preparing_thumbnail": "Đang chuẩn bị ảnh thu nhỏ...",
  "file_load.preparing_view": "Đang chuẩn bị góc nhìn...",
@@ -1679,7 +1707,7 @@
  "help.sketch.insert_svg": "Đọc các đường dẫn của bản vẽ SVG vào phác thảo, theo tỉ lệ, góc xoay và vị trí bạn đặt. Dùng để biến logo hoặc đường bao véc tơ thành đường cong có thể đùn.",
  "help.sketch.inspect": "Mở báo cáo về bản phác thảo đang mở: còn bao nhiêu bậc tự do và đã ràng buộc hoàn toàn chưa. Dùng nó để biết phần nào vẫn còn di chuyển được trước khi hoàn tất bản phác thảo.",
  "help.sketch.intersect": "Thêm các đường cong hoặc điểm nơi khối, mặt, cạnh hoặc phác thảo khác cắt qua mặt phẳng phác thảo. Chúng vẫn được liên kết và thay đổi theo mô hình.",
-  "help.sketch.intersection_curve": "Tạo đường cong 3D tại nơi hai khối hoặc hai mặt gặp nhau, liên kết với chúng. Dùng làm đường dẫn hoặc ray dẫn hướng thay đổi theo mô hình.",
+  "help.sketch.intersection_curve": "Tạo đường cong 3D tại nơi hai khối, hai mặt hoặc đường cong của các phác thảo khác gặp nhau, liên kết với chúng. Dùng làm đường dẫn hoặc ray dẫn hướng thay đổi theo mô hình.",
  "help.sketch.isoparametric_curve": "Tạo đường cong 3D theo hướng U hoặc V của một mặt qua điểm bạn chọn, liên kết với mặt đó. Dùng làm đường dẫn hoặc đường tách thay đổi theo bề mặt.",
  "help.sketch.line": "Vẽ các đường thẳng nối liền từng điểm một, thành chuỗi hở hoặc đường bao khép kín. Đây là công cụ cơ bản cho hầu hết biên dạng.",
  "help.sketch.line.midpoint": "Vẽ đường thẳng từ trung điểm ra một đầu, đầu kia đối xứng qua trung điểm. Dùng cho đường thẳng có tâm tại một điểm, như cạnh đối xứng.",
@@ -1785,6 +1813,7 @@
  "help.view.navigate": "Xoay, dịch hoặc thu phóng khung nhìn theo từng bước, chẳng hạn xoay một phần tư vòng sang trái. Dùng để điều khiển camera chính xác thay vì kéo chuột.",
  "help.view.navigation_bar": "Hiện hoặc ẩn thanh điều hướng ở cuối khung nhìn. Ẩn đi để có thêm chỗ, hiện ra để dùng các công cụ xem bằng chuột.",
  "help.view.rename": "Đặt tên mới cho một góc nhìn đã lưu. Bản thân góc nhìn không đổi.",
+  "help.view.ribbon_tabs_only": "Thu gọn ribbon chỉ còn hàng thẻ, để khung nhìn có thêm chỗ mà các bảng từng chiếm. Bấm một thẻ để hiện các bảng của nó đè lên khung nhìn; chọn lại lệnh này để luôn hiện toàn bộ ribbon.",
  "help.view.save": "Lưu vị trí camera hiện tại thành một góc nhìn có tên trong thiết kế. Dùng để quay lại đúng góc đó sau này, chẳng hạn khi chụp ảnh màn hình.",
  "help.view.spin": "Quay khung nhìn quanh mô hình liên tục cho đến cú nhấp hoặc phím tiếp theo. Dùng để trình bày mô hình từ mọi phía.",
  "help.view.tool": "Giữ cố định một công cụ camera (xoay quanh, dịch hoặc thu phóng) để kéo bằng nút chuột trái sẽ di chuyển khung nhìn cho đến khi bạn tắt nó. Dùng trên bàn di chuột hoặc khi không có nút chuột giữa.",
@@ -1999,6 +2028,7 @@
  "material.selection.mixed": "Các vật liệu khác nhau",
  "measure.at": "Tại",
  "measure.item": "Mục {number}",
+  "measure.line_to_centre": "Từ đường đến tâm",
  "measure.quick_copied": "Đã sao chép số đo",
  "measure.quick_copy": "Nhấp để sao chép số đo",
  "measure.quick_edges": "{count} cạnh",
@@ -2029,6 +2059,8 @@
  "nav.blender.help": "Kéo chuột giữa để xoay, Shift+chuột giữa để trượt, Ctrl+chuột giữa để thu phóng; kéo chuột phải giữ nguyên camera",
  "nav.creo.help": "Kéo nút giữa để xoay, Shift+nút giữa để di chuyển, Ctrl+kéo nút giữa theo chiều dọc để thu phóng (kéo xuống để phóng to); lăn con lăn để thu phóng",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "Kéo bằng nút giữa hoặc nút phải sẽ tiếp tục xoay, di chuyển hoặc thu phóng như lúc bắt đầu cho đến khi nhả nút, dù trong lúc đó có nhấn hay nhả phím nào. Tắt: các phím đang giữ quyết định ở mọi thời điểm của thao tác kéo.",
+  "nav.drag_keeps_mode.label": "Thao tác kéo giữ nguyên kiểu điều hướng lúc bắt đầu",
  "nav.free_orbit.help": "Chuột và chuột 3D xoay tự do qua cả hai cực và giữ nguyên độ lăn nghiêng (Roll). Bắt dính trục bằng phím Shift sẽ bị tắt.",
  "nav.free_orbit.label": "Xoay góc nhìn tự do",
  "nav.free_orbit.snap_help": "Chuột và chuột 3D xoay qua cả hai cực và giữ nguyên góc nghiêng cuộn. Giữ Shift trong khi kéo xoay quỹ đạo để bắt dính hướng nhìn và góc nghiêng cuộn.",
@@ -2265,6 +2297,17 @@
  "prefs.auto_operation_note": "Nối, Vật thể mới hoặc Cắt, tùy vào phần vật liệu tiếp xúc.",
  "prefs.axes": "Các trục tọa độ",
  "prefs.axis": "Trục tọa độ",
+  "prefs.background_choose": "Chọn ảnh…",
+  "prefs.background_image": "Ảnh",
+  "prefs.background_unreadable": "Không đọc được ảnh nền",
+  "prefs.blur_cost": "Chi phí kết xuất tương đối. Nhiều thanh hơn thường có nghĩa là cần xử lý nhiều hơn.",
+  "prefs.blur_device": "Không khả dụng trên thiết bị đồ họa hoặc đường kết xuất này",
+  "prefs.blur_guard": "Chất lượng làm mờ đã giảm để duy trì độ phản hồi của khung hình. Bán kính không thay đổi.",
+  "prefs.blur_off": "Tắt",
+  "prefs.blur_reduce_transparency": "Bị tắt bởi cài đặt Giảm độ trong suốt của hệ thống",
+  "prefs.blur_software": "Không khả dụng với đồ họa phần mềm (gpu-software)",
+  "prefs.blur_source": "Không khả dụng trong chế độ xem không gian làm việc này",
+  "prefs.blur_web": "Không khả dụng trên đường kết xuất web này",
  "prefs.bodies_folders": "Thư mục thân khối",
  "prefs.bodies_folders_always": "Luôn luôn",
  "prefs.bodies_folders_never": "Không bao giờ",
@@ -2278,6 +2321,8 @@
  "prefs.browser_eye_left": "Biểu tượng mắt cạnh mũi tên thu gọn",
  "prefs.browser_eye_left_note": "Các hàng trong cây thư mục hiển thị biểu tượng mắt bật/tắt cạnh mũi tên thu gọn như trước đây, thay vì trong một cột ở đầu bên phải của các hàng.",
  "prefs.browser_reveal_on_hover": "Hiện khi di chuột",
+  "prefs.browser_rows_start_closed": "Các dòng trong cây thư mục đóng sẵn",
+  "prefs.browser_rows_start_closed_note": "Vị trí đặt và thư mục trong cây thư mục bắt đầu ở trạng thái đóng, nên thiết kế có nhiều thành phần chỉ hiện các dòng cấp trên cùng. Mỗi dòng mở bằng mũi tên của nó, “Mở rộng tất cả” hoặc “Tìm trong cây đối tượng”, lệnh này chỉ mở các dòng dẫn tới thân khối và đóng lại các dòng mà lần tìm trước đã mở. Chọn một thân khối trong khung nhìn 3D không làm thay đổi cây thư mục. Khi tắt, các thư mục mở sẵn, vị trí đặt theo tùy chọn “Thành phần mở sẵn”, và việc chọn trong khung nhìn 3D mở cây thư mục tới thân khối đó, như trước đây.",
  "prefs.browser_show_note": "Hiển thị giữ trình duyệt trên màn hình. Hiện khi di chuột ẩn nó cho đến khi con trỏ đến vị trí của nó hoặc thẻ mảnh ở cạnh trái, và nó vẫn mở khi con trỏ ở bên trong hoặc một menu của nó đang mở.",
  "prefs.browser_shown": "Hiển thị",
  "prefs.built_in": "Mặc định tích hợp",
@@ -2288,6 +2333,7 @@
  "prefs.carousel_previous": "Trước",
  "prefs.choose_font": "Chọn tệp phông chữ…",
  "prefs.click": "Nhấp chuột",
+  "prefs.command_dialog_values": "Hộp thoại lệnh",
  "prefs.contact_shading": "Đổ bóng tiếp xúc mềm",
  "prefs.contact_shading_note": "Tạo bóng đổ mềm tại những vị trí các chi tiết tiếp giáp gần nhau.",
  "prefs.context_menu": "Menu ngữ cảnh",
@@ -2323,6 +2369,13 @@
  "prefs.dialogs_edge": "Ở cạnh khung nhìn",
  "prefs.dialogs_left_column": "Trong cột bên trái",
  "prefs.dialogs_note": "Nơi hộp thoại lệnh mở ra: gắn ở cạnh khung nhìn, hoặc trong cột bên trái thay cho trình duyệt và Lịch sử, hai phần này trở lại như cũ khi hộp thoại đóng.",
+  "prefs.dimension_step_angle": "Lượng mà mũi tên của cửa sổ, Lên/Xuống và con lăn cộng vào một góc",
+  "prefs.dimension_step_length": "Lượng mà mũi tên của cửa sổ, Lên/Xuống và con lăn cộng vào một độ dài",
+  "prefs.dimension_steps": "Bước của cửa sổ",
+  "prefs.dimension_values": "Giá trị kích thước",
+  "prefs.dimension_values_note": "Nơi bạn nhập giá trị kích thước. Cửa sổ có mũi tên để thay đổi theo bước; công cụ Kích thước đặt văn bản trước.",
+  "prefs.dimension_values_view": "Trong khung nhìn",
+  "prefs.dimension_values_window": "Trong một cửa sổ",
  "prefs.display": "Hiển thị",
  "prefs.edges": "Cạnh và đổ bóng",
  "prefs.extend": "Kéo dài",
@@ -2376,6 +2429,8 @@
  "prefs.graphics_page.surfaces_edges": "Bề mặt và cạnh",
  "prefs.graphics_page.view_bar": "Cũng có trên thanh khung nhìn",
  "prefs.graphics_presets_note": "Các cấu hình định sẵn sẽ thiết lập đồng thời các tùy chọn bên dưới.",
+  "prefs.ground_shadow_follows_model": "Bóng trên mặt đất di chuyển theo mô hình",
+  "prefs.ground_shadow_follows_model_help": "Đặt bóng bên dưới khối hiển thị thấp nhất. Khi tắt, bóng của mô hình được nâng lên vẫn nằm trên mặt phẳng đất đi qua gốc tọa độ.",
  "prefs.hide_constraint_glyphs_zoomed_out": "Ẩn biểu tượng ràng buộc khi thu nhỏ",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "Biểu tượng ràng buộc biến mất khi bản phác được thu nhỏ đủ xa để không làm rối khung nhìn. Tắt: chúng giữ kích thước màn hình cố định ở mọi mức thu phóng.",
  "prefs.history": "Lịch sử",
@@ -2402,6 +2457,10 @@
  "prefs.invert_curved_roll_arrows_note": "Hai mũi tên cong ở góc khối cuộn khung nhìn trong mặt phẳng màn hình. Khi bật: mũi tên theo chiều kim đồng hồ cuộn ngược chiều kim đồng hồ và ngược lại. Khi tắt: mỗi mũi tên cuộn khung nhìn theo chiều cong của nó.",
  "prefs.invert_navigator_arrows": "Đảo ngược mũi tên xoay của khối điều hướng",
  "prefs.invert_navigator_arrows_note": "Các mũi tên quanh khối xoay camera theo hướng mũi tên chỉ, như trong Fusion và Inventor: mũi tên bên trái chỉ sang phải và đưa camera sang phải. Khi tắt: mũi tên xoay khối về phía cạnh chứa nó, nên mũi tên bên trái đưa camera sang trái. Hai mũi tên cuộn cong không bị ảnh hưởng.",
+  "prefs.keep_unsaved_also_asks": "Vẫn hỏi khi đóng thẻ",
+  "prefs.keep_unsaved_also_asks_tip": "Khi tắt, thẻ sẽ đóng mà không có hộp thoại của trình duyệt khi bản sao của mọi thiết kế chưa lưu đã được cập nhật.",
+  "prefs.keep_unsaved_in_browser": "Giữ công việc chưa lưu trong trình duyệt này",
+  "prefs.keep_unsaved_in_browser_tip": "Các thay đổi chưa lưu của mỗi thiết kế đang mở được cập nhật liên tục trong bộ nhớ riêng của trình duyệt này. Lần truy cập sau sẽ đề nghị khôi phục chúng.",
  "prefs.keep_work_on_tab_switch": "Giữ hộp thoại và công cụ mở khi chuyển giữa các thiết kế",
  "prefs.keep_work_on_tab_switch_note": "Mỗi thẻ thiết kế giữ hộp thoại hoặc công cụ đang mở, cùng những gì bạn đã chọn và nhập trong đó, và thẻ thanh công cụ của nó. Chúng vẫn còn đó khi bạn quay lại thiết kế. Tắt: chuyển thiết kế sẽ hủy chúng và hiển thị thẻ Mô hình.",
  "prefs.labels": "Nhãn chữ",
@@ -2413,6 +2472,8 @@
  "prefs.layout_page.card": "Thẻ",
  "prefs.layout_page.column": "Cột",
  "prefs.layout_page.hover": "Rê chuột",
+  "prefs.layout_page.hover_panel_menus": "Chuyển menu nhóm khi di chuột",
+  "prefs.layout_page.hover_panel_menus_help": "Nhấp vào tên nhóm trên dải công cụ để mở menu. Di chuột lên tên nhóm khác để chuyển menu. Di chuyển con trỏ ra ngoài dải công cụ và menu đang mở để đóng menu.",
  "prefs.layout_page.icons_labels": "Biểu tượng + nhãn",
  "prefs.layout_page.ok_cancel": "Đồng ý và Hủy bỏ",
  "prefs.layout_page.on_hover": "Khi rê chuột",
@@ -2515,6 +2576,8 @@
  "prefs.quality_smoother": "mượt mà hơn",
  "prefs.quick_measure": "Đo nhanh ở góc khung nhìn",
  "prefs.quick_measure_note": "Hiển thị kích thước của đối tượng được chọn ở góc dưới bên phải khung nhìn, phía trên Lịch sử: chiều dài của cạnh (hoặc Ø và R với cạnh tròn), diện tích của mặt, vị trí của điểm, khoảng cách và góc giữa hai đối tượng, tổng của nhiều cạnh hoặc mặt. Nhấp để sao chép.",
+  "prefs.remember_dialog_values": "Ghi nhớ giá trị hộp thoại lệnh",
+  "prefs.remember_dialog_values.help": "Tắt theo mặc định. Khi bật, sau khi lệnh thành công, các giá trị và tùy chọn an toàn của lệnh sẽ được dùng lại vào lần tiếp theo bạn mở cùng lệnh đó, cho đến khi SolidCraft đóng.",
  "prefs.render_previous_geometry_budget": "Dùng ngân sách hình học trước đây cho bản xem trước kết xuất",
  "prefs.render_previous_geometry_budget_help": "Khôi phục giới hạn hình học cố định trước đây (512 MiB trên máy tính 64 bit, 128 MiB trên các nền tảng khác) thay cho ngân sách dựa trên thiết bị.",
  "prefs.reports_saved": "Đã lưu {n}",
@@ -2523,6 +2586,8 @@
  "prefs.ribbon_click_ends_tool_note": "Nhấp vào nút ruy-băng đang sáng của công cụ phác thảo đang dùng sẽ kết thúc công cụ, để các cú nhấp trong khung nhìn lại chọn đối tượng. Tắt: cú nhấp khởi động lại công cụ.",
  "prefs.ribbon_reveal": "Hiện kết quả tìm kiếm trên ribbon",
  "prefs.ribbon_reveal_note": "Khi rê chuột lên một kết quả trong Tìm lệnh, ribbon cho biết lệnh nằm ở đâu: tab, nút hoặc dòng của nó trong menu thả xuống của một bảng. Lệnh bắt đầu từ tìm kiếm sẽ nhấp nháy ở đó, và lệnh đang chạy từ menu thả xuống sẽ đánh dấu bảng của nó.",
+  "prefs.ribbon_tabs_only": "Chỉ hiện các thẻ của ribbon",
+  "prefs.ribbon_tabs_only_note": "Ribbon thu gọn chỉ còn hàng thẻ. Bấm một thẻ sẽ hiện các bảng của nó đè lên khung nhìn cho đến khi một lệnh bắt đầu hoặc con trỏ rời khỏi chúng. Lệnh Chỉ các thẻ ribbon trong thẻ Xem, hoặc phím tắt của nó, bật tắt tùy chọn này.",
  "prefs.right_click": "Nhấp chuột phải",
  "prefs.saving": "Khởi động và lưu",
  "prefs.scale_note": "Cũng có thể dùng Ctrl + / Ctrl − trong cửa sổ. Các nút có kích thước 28 px ở mức 100%.",
@@ -2533,6 +2598,8 @@
  "prefs.section_hatch_by_part": "Theo chi tiết",
  "prefs.section_hatch_one": "Một kiểu",
  "prefs.select": "Chọn",
+  "prefs.select_hidden_edges": "Chọn cạnh bị che trong chế độ tô bóng có cạnh ẩn",
+  "prefs.select_hidden_edges_help": "Cho phép chọn cạnh xuyên qua bề mặt khi dùng chế độ tô bóng có cạnh ẩn, kể cả cho lệnh Fillet. Tắt để giữ cách chọn của v0.30.1. Các khối đã ẩn vẫn không thể chọn.",
  "prefs.select_one_item": "Chọn một mục",
  "prefs.select_other_hidden": "Chọn hình học ẩn bằng Chọn đối tượng khác",
  "prefs.select_other_hidden_help": "Bật: bao gồm các khối, bản phác thảo ẩn và cạnh bị che gần con trỏ. Tắt: dùng danh sách ban đầu chỉ gồm hình học đang hiển thị ngay dưới con trỏ.",
@@ -2557,6 +2624,8 @@
  "prefs.sketch.click_selects": "Nhấp để chọn",
  "prefs.sketch.conflict_colour": "Màu xung đột",
  "prefs.sketch.drawing": "Vẽ",
+  "prefs.sketch.ellipse_axes": "Vẽ hình elip kèm các trục",
+  "prefs.sketch.ellipse_axes_note": "Trục lớn và trục nhỏ dưới dạng đường gióng dựng hình, để có thể ghi kích thước bán trục và trục. Tắt: chỉ vẽ hình elip, và D trên nó cho bán kính nhỏ dù kéo giá trị đến đâu, được vẽ và ghi nhãn R như trước.",
  "prefs.sketch.exit_keep": "Giữ nguyên",
  "prefs.sketch.exit_previous": "Trở về góc nhìn trước đó",
  "prefs.sketch.exit_unless_rotated": "Trừ khi đã xoay",
@@ -2650,6 +2719,10 @@
  "prefs.theme_follow_off": "Tắt",
  "prefs.theme_follow_stop": "Dừng theo dõi",
  "prefs.theme_import_hint": "Nhấp để chọn tệp giao diện, thả tệp vào đây, hoặc nhấn Ctrl+V (Cmd+V trên Mac) khi đã sao chép một giao diện",
+  "prefs.theme_notice_dismiss": "Ẩn",
+  "prefs.theme_option_blur": "Làm mờ phía sau bảng",
+  "prefs.theme_option_blur_help": "Làm mờ phía sau các bảng bán trong suốt, tính bằng pixel vật lý. Giá trị 0 là tắt.",
+  "prefs.theme_option_invalid": "Giá trị đã lưu cho {option} không hợp lệ; đang dùng giá trị mặc định của giao diện. Giá trị đã lưu vẫn được giữ lại.",
  "prefs.theme_option_opacity": "Độ đục",
  "prefs.theme_option_opacity_help": "Điều chỉnh độ đục của các bảng nổi. Giới hạn độ đục tối thiểu giúp văn bản luôn dễ đọc trên nền màu của khung nhìn.",
  "prefs.theme_option_tab_colours": "Màu thẻ",
@@ -2658,6 +2731,7 @@
  "prefs.theme_option_tab_fade_ms_help": "Chuyển dần màu của bảng điều khiển và khung nhìn khi đổi thẻ. Đặt thành 0 để chuyển ngay lập tức.",
  "prefs.theme_options_badge": "Tùy chọn",
  "prefs.theme_options_more": "Thêm · {count}",
+  "prefs.theme_options_newer": "Giao diện này yêu cầu phiên bản SolidCraft mới hơn. Sau khi nâng cấp, hãy nhập lại giao diện gốc để khôi phục các định nghĩa tùy chọn.",
  "prefs.theme_options_reset": "Đặt lại",
  "prefs.theme_options_unavailable": "Không khả dụng trên thiết bị này",
  "prefs.theme_paste": "Dán giao diện",
@@ -2721,6 +2795,12 @@
  "recovery.just_now": "vừa xong",
  "recovery.min_ago": "{count} phút trước",
  "recovery.never_saved": "chưa từng lưu",
+  "recovery.open_saved": "Mở phiên bản đã lưu",
+  "recovery.restore": "Khôi phục",
+  "recovery.restore_intro": "Các thay đổi chưa được lưu khi trang này đóng lần trước được giữ trong trình duyệt này.",
+  "recovery.restore_row": "{name}, thay đổi {when}",
+  "recovery.restore_title": "Khôi phục các thiết kế chưa lưu?",
+  "recovery.restore_title_one": "Khôi phục thiết kế chưa lưu: {name}, thay đổi {when}?",
  "refused.change": "Không thể thay đổi {body}.",
  "refused.cut": "Không thể cắt {body}.",
  "refused.face_curved": "Một trong các mặt cong của nó không dùng được để mô hình hóa.",
@@ -3242,9 +3322,11 @@
  "render.frame_wide": "16:9 · Màn ảnh rộng",
  "render.gpu_depth": "Độ sâu đường truyền tia tối đa",
  "render.gpu_options_help": "Số mẫu, độ sâu, hạt giống và độ phơi sáng được lưu cùng thiết lập này. Chỉ lưu phương thức tạo ảnh đang hoạt động.",
+  "render.gpu_path_crashed": "Lần trước SolidCraft đã đóng khi đang thiết lập nó trên bộ điều hợp đồ họa này, nhiều khả năng là trong trình điều khiển đồ họa, nên nó sẽ không tự thiết lập lại. Hãy dùng dò tia trên CPU, hoặc thử lại (cập nhật trình điều khiển cũng sẽ thử lại).",
  "render.gpu_path_failed": "Bộ dò đường truyền tia GPU không khả dụng",
  "render.gpu_path_first_setup": "Lần thiết lập đầu tiên trên GPU này có thể mất vài phút; SolidCraft vẫn sử dụng được bình thường. Các lần khởi động sau sẽ tái sử dụng mã đổ bóng đã biên dịch nếu trình điều khiển lưu giữ chúng.",
  "render.gpu_path_preparing": "Bộ dò đường truyền tia GPU: đang biên dịch mã đổ bóng…",
+  "render.gpu_path_retry": "Thử lại",
  "render.gpu_seed": "Hạt giống ngẫu nhiên",
  "render.gpu_unavailable": "Dò đường truyền tia GPU chưa sẵn sàng trên thiết bị này.",
  "render.ground_apply": "Khớp và lưu mặt sàn",
@@ -3858,6 +3940,7 @@
  "render.stage_panels.extent": "Phạm vi",
  "render.stage_panels.fit_save": "Khớp và lưu",
  "render.stage_panels.gpu_required": "Cần dò đường đi của tia bằng GPU",
+  "render.stage_panels.grain_angle": "Góc vân gỗ",
  "render.stage_panels.keep": "Giữ lại",
  "render.stage_panels.kept": "Được giữ lại",
  "render.stage_panels.kept_fields": "Camera, lấy mẫu, kích thước, liên kết quang học, hình học CAD và đặc tính kỹ thuật.",
@@ -3976,6 +4059,19 @@
  "render.subsurface_enable": "Bước đi ngẫu nhiên tán xạ bên trong",
  "render.subsurface_help": "Chỉ dành cho chất điện môi kín. Hệ số tán xạ và hấp thụ RGB là các hệ số riêng biệt trên mỗi mm. Tia sáng tán xạ bên trong hình học thực tế, sau đó khúc xạ hoặc phản xạ tại ranh giới. Hãy tắt bóng đổ thẳng, khử nhiễu bề mặt và thể tích bên ngoài; dùng một phân tầng Fresnel. Đây không phải bộ đổ bóng khuếch tán, lưới mật độ hay vật liệu đo đạc. Môi trường đậm đặc có thể cần nhiều mẫu và độ sâu tia lớn hơn.",
  "render.subsurface_rate": "Tần suất va chạm tán xạ",
+  "render.surface_import.author": "Tác giả",
+  "render.surface_import.busy": "Đang nhập ảnh…",
+  "render.surface_import.complete": "Chọn ảnh rồi nhập tác giả, nguồn và giấy phép.",
+  "render.surface_import.embedded": "Ảnh đã nhập",
+  "render.surface_import.failed": "Quá trình nhập ảnh chưa hoàn tất.",
+  "render.surface_import.license": "Giấy phép / quyền sở hữu",
+  "render.surface_import.raytrace_required": "Ảnh cần dò tia trên CPU hoặc GPU. Hãy chọn trong phần Đầu ra.",
+  "render.surface_import.repeat_u": "Chu kỳ U",
+  "render.surface_import.repeat_v": "Chu kỳ V",
+  "render.surface_import.save": "Lưu ảnh trên khối",
+  "render.surface_import.saved_cpu": "Lưu bản đồ để dùng khi kết xuất bằng CPU.",
+  "render.surface_import.source": "Nguồn",
+  "render.surface_import.title": "Nhập ảnh",
  "render.tone_aces_fitted": "ACES khớp",
  "render.tone_reinhard": "Reinhard",
  "render.transmission_scope": "Thủy tinh GPU hỗ trợ các môi trường rời rạc đã xác thực. Không cung cấp môi trường lồng nhau không giới hạn hay ước tính truyền dẫn không nhiễu.",
@@ -4052,6 +4148,8 @@
  "sample.plate.name": "Tấm mẫu",
  "sample.vents.about": "Các rãnh then trong mảng chữ nhật: số hàng, số cột và bước rãnh là các tham số",
  "sample.vents.name": "Tấm khe thông gió",
+  "scale.per_axis": "Theo từng trục",
+  "scale.uniform": "Đồng đều",
  "search.command_keys": "Enter chạy     Shift+Enter chạy và giữ mở     Esc đóng",
  "search.commands": "Lệnh",
  "search.design": "Trong thiết kế này",
@@ -4142,6 +4240,32 @@
  "sketch.dof_left": "Còn {count} bậc tự do",
  "sketch.dof_left_one": "Còn {count} bậc tự do",
  "sketch.draw_curves": "Vẽ dưới dạng {linetype}",
+  "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+  "sketch.error.nothing_to_break": "nothing to break here",
+  "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+  "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+  "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+  "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+  "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+  "sketch.hint.break": "Break: click a curve where it should split",
+  "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+  "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+  "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+  "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+  "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+  "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+  "sketch.hint.fallback": "Click in the sketch",
+  "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+  "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+  "sketch.hint.open_done": "Open done",
+  "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+  "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+  "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+  "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+  "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+  "sketch.hint.slot": "Slot: click both ends, then the width",
+  "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+  "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
  "sketch.make_selection": "Chuyển đổi vùng chọn sang {linetype}",
  "sketch.open_ends": "Đầu hở: {count}",
  "sketch.status_conflict": "ràng buộc xung đột",
@@ -4363,6 +4487,7 @@
  "ui.3d_sketch": "3D Phác thảo",
  "ui.activate": "Kích hoạt",
  "ui.active_component": "Cụm chi tiết đang kích hoạt",
+  "ui.addToQuickAccess": "Thêm vào Truy cập nhanh",
  "ui.add_configuration": "Thêm cấu hình",
  "ui.add_parameter": "Thêm tham số",
  "ui.agent_chat": "Trò chuyện với AI Agent",
@@ -4697,6 +4822,7 @@
  "ui.click_selects_whole_bodies": "Nhấp chuột chọn toàn bộ thân khối",
  "ui.click_then_press_key": "Nhấp chuột, sau đó nhấn phím mới",
  "ui.close": "Đóng",
+  "ui.close_tab": "Đóng thẻ",
  "ui.coil": "Lò xo xoắn",
  "ui.coincident": "Trùng điểm",
  "ui.collapse": "Thu gọn",
@@ -4784,6 +4910,7 @@
  "ui.default_modelling_orientation": "Hướng mô hình hóa mặc định",
  "ui.delete": "Xóa",
  "ui.delete_select_first": "Hãy chọn trước những gì cần xóa: tính năng, khối, thành phần hoặc hình học phác thảo",
+  "ui.dependents_select_first": "Hãy chọn trước đối tượng để liệt kê các phần phụ thuộc của nó",
  "ui.depth": "Độ sâu",
  "ui.design": "Thiết kế",
  "ui.design_properties.author": "Tác giả",
@@ -4913,6 +5040,11 @@
  "ui.factor": "Hệ số",
  "ui.fade": "Thoát ren",
  "ui.fade_length": "Chiều dài thoát ren",
+  "ui.fair_iterations": "Số lần lặp",
+  "ui.fair_keep_edges": "Giữ các cạnh",
+  "ui.fair_strength": "Cường độ",
+  "ui.fair_surface_title": "LÀM MƯỢT BỀ MẶT",
+  "ui.fair_tolerance_default": "0,001 lần kích thước thân khối",
  "ui.feature_history": "Lịch sử tính năng",
  "ui.feature_options": "Tùy chọn tính năng",
  "ui.features": "Các tính năng",
@@ -4941,6 +5073,10 @@
  "ui.fillet_setback_least": "Lớn hơn {least}",
  "ui.fillet_setback_tip": "Nơi mảng góc trơn bắt đầu: khoảng cách dọc theo mỗi cạnh tính từ góc. Mặc định là {factor} × bán kính. Giá trị phải lớn hơn khoảng lùi nhỏ nhất, tại đó các đường bo gặp nhau mà không cần lùi: bằng bán kính khi các mặt vuông góc với nhau.",
  "ui.fillet_smooth_radius": "Thay đổi bán kính trơn",
+  "ui.fillet_turn": "Chỗ rẽ",
+  "ui.fillet_turn_mitre": "Vát góc",
+  "ui.fillet_turn_swept": "Quét vòng",
+  "ui.fillet_turn_tip": "Nơi hai góc lượn rẽ quanh một cạnh góc sắc nằm giữa chúng, ví dụ các góc lượn ở chân một khối lồi tại các cạnh đứng của nó.\nVát góc: các góc lượn kéo dài cho đến khi gặp nhau theo đường vát.\nQuét vòng: các góc lượn dừng ở cạnh góc và quay quanh nó, góc là một mặt xuyến tiếp xúc với cả hai. Chỉ cho các góc lượn cùng bán kính quanh một cạnh góc thẳng và lồi.",
  "ui.fillet_type_choices_tip": "Bán kính không đổi: một bán kính dọc suốt cạnh.\nĐộ dài dây cung: độ rộng ngang đường bo giữ nguyên, bất kể góc gặp nhau của các mặt.\nBán kính thay đổi: một bán kính ở mỗi đầu, và thêm dọc cạnh nếu bạn thêm vào.\nLiên tục độ cong: mặt cắt không làm gãy phản chiếu tại nơi gặp các mặt phẳng (G2).\nSpline: bán kính dọc cạnh theo các bán kính điều khiển bạn đặt.",
  "ui.fillet_type_curvature": "Liên tục độ cong",
  "ui.fillet_type_tip": "Mặt cắt ngang qua cạnh. Liên tục độ cong: mặt cắt liên tục độ cong (G2) giữa các mặt phẳng, nên phản chiếu đi từ các mặt vào đường bo mà không bị gãy.",
@@ -4986,6 +5122,7 @@
  "ui.heading_construct": "DỰNG HÌNH",
  "ui.heading_create": "TẠO MỚI",
  "ui.heading_create_sketch": "TẠO PHÁC THẢO",
+  "ui.heading_custom_view_navigator": "KHỐI ĐIỀU HƯỚNG GÓC NHÌN TÙY CHỈNH",
  "ui.heading_cylinder": "HÌNH TRỤ",
  "ui.heading_design": "THIẾT KẾ",
  "ui.heading_draft": "ĐỘ DỐC THOÁT KHUÔN",
@@ -5093,6 +5230,7 @@
  "ui.inspect": "Kiểm tra",
  "ui.instances": "Số bản",
  "ui.intersect": "Giao nhau",
+  "ui.intersection_curve_second_pick": "Đường cong giao tuyến: nhấp vào bề mặt hoặc đường cong thứ hai (nhấp chuột phải để bắt đầu lại)",
  "ui.iso_4753": "ISO 4753",
  "ui.isolate": "Cô lập đối tượng",
  "ui.join": "Nối liền",
@@ -5121,6 +5259,7 @@
  "ui.manipulator_free_alt": "Kéo tự do bộ thao tác cũng bằng Alt/Option",
  "ui.manipulator_free_alt_tip": "Bật: Alt/Option hoặc Ctrl/Cmd trên các mũi tên đùn / gizmo sẽ tắt bước nhảy giá trị. Tắt: chỉ Ctrl/Cmd.",
  "ui.manufacture": "Gia công chế tạo",
+  "ui.match_surface_title": "KHỚP BỀ MẶT",
  "ui.material_review.axes": "Các trục cục bộ của vật liệu; chưa gán hướng cho thân khối.",
  "ui.material_review.claims": "Nguồn gốc và giấy phép là thông tin chưa được kiểm chứng. Các giá trị thiếu vẫn ở dạng chưa biết.",
  "ui.material_review.compressive_strength": "Độ bền nén",
@@ -5143,6 +5282,9 @@
  "ui.material_review.title": "Xem xét dữ liệu thuộc tính vật liệu",
  "ui.material_review.unknown": "Chưa biết",
  "ui.material_review.yield_strength": "Giới hạn chảy",
+  "ui.mcp_agents": "Tác tử qua MCP",
+  "ui.mcp_compact": "Đầu ra gọn",
+  "ui.mcp_compact_note": "Dành cho các tác tử kết nối qua máy chủ MCP (solidcraft-cli mcp): inspect_design tóm tắt các bản phác thảo và kết quả công cụ không được định dạng đẹp, nên tốn ít token hơn. Áp dụng cho các phiên tác tử bắt đầu sau khi thay đổi; --compact hoặc SOLIDCRAFT_MCP_COMPACT=1 cũng bật nó.",
  "ui.measure": "Đo lường",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "3MF kèm thẻ bề mặt",
@@ -5184,6 +5326,7 @@
  "ui.options": "Tùy chọn",
  "ui.orbit": "Xoay quanh tâm (Orbit)",
  "ui.orbit_around": "Xoay quanh",
+  "ui.organize": "Sắp xếp",
  "ui.orientation": "Định hướng",
  "ui.origin": "Gốc tọa độ",
  "ui.palette_construction_mode": "Chế độ đường dựng (X)",
@@ -5228,6 +5371,7 @@
  "ui.point_cloud_add_filter": "Thêm bộ lọc…",
  "ui.point_cloud_auto_range": "Phạm vi tự động",
  "ui.point_cloud_color_by": "Tô màu theo",
+  "ui.point_cloud_dots": "Điểm đơn lẻ",
  "ui.point_cloud_file_colors": "Màu trong tệp",
  "ui.point_cloud_filter_by": "Lọc theo",
  "ui.point_cloud_height_high": "Cao nhất",
@@ -5272,6 +5416,7 @@
  "ui.quality": "Chất lượng",
  "ui.quantity": "Số lượng",
  "ui.quantity_2": "Số lượng 2",
+  "ui.quick_access_full": "Thanh truy cập nhanh chứa tối đa {count} lệnh; hãy gỡ một lệnh để thêm lệnh khác",
  "ui.quit": "Thoát ứng dụng",
  "ui.radial_context_menu": "Menu ngữ cảnh dạng vòng (Radial)",
  "ui.radius": "Bán kính",
@@ -5289,6 +5434,7 @@
  "ui.relink_not_linked": "Chi tiết này chưa được liên kết với thiết kế nguồn nào.",
  "ui.relink_select_one": "Hãy chọn trước một chi tiết được liên kết hoặc một thể hiện của nó.",
  "ui.relink_source_all": "Liên kết lại nguồn (tất cả thể hiện)…",
+  "ui.removeFromQuickAccess": "Gỡ khỏi Truy cập nhanh",
  "ui.removeFromToolbar": "Xóa khỏi thanh công cụ",
  "ui.removeSection": "Xóa mặt cắt",
  "ui.render": "Kết xuất hình ảnh",
@@ -5297,6 +5443,8 @@
  "ui.repeat_nothing": "Chưa có gì để lặp lại: hãy bắt đầu một công cụ hoặc hộp thoại trước.",
  "ui.replace_with_link_done": "Các bản sao hiện đã trở thành các vị trí đặt của thiết kế liên kết.",
  "ui.report_a_bug": "Báo cáo lỗi",
+  "ui.report_characters_left_one": "Còn {count} ký tự",
+  "ui.report_characters_left_other": "Còn {count} ký tự",
  "ui.reset": "Đặt lại",
  "ui.reset_all": "Đặt lại tất cả",
  "ui.reset_the_settings_on_this_page": "Đặt lại các cài đặt trên trang này",
@@ -5581,6 +5729,14 @@
  "values must be numbers or expressions": "các giá trị phải là số hoặc biểu thức",
  "view.auto_ortho_faces": "Phối cảnh khi xoay quỹ đạo, trực giao khi nhìn trực diện mặt",
  "view.render_inspector": "Bảng thuộc tính kết xuất",
+  "view_gizmo.arrows": "Mũi tên xoay",
+  "view_gizmo.home": "Nút góc nhìn mặc định (Home)",
+  "view_gizmo.no_such_body": "Thiết kế này không có thân khối nào mang tên đó.",
+  "view_gizmo.note": "Chọn một thân khối trong khung nhìn. Thân khối được lưu cùng tùy chọn và hồ sơ cài đặt của bạn, và hiển thị trong mọi thiết kế. Nhấp vào một mặt của nó để nhìn thẳng vào mặt đó.",
+  "view_gizmo.texture": "Kết cấu",
+  "view_gizmo.themed": "Theo chủ đề",
+  "view_gizmo.too_detailed": "Quá chi tiết cho khối điều hướng góc nhìn (hơn 10.000 tam giác)",
+  "view_gizmo.too_thin": "Quá dài và mảnh cho khối điều hướng góc nhìn: cạnh mỏng nhất phải ít nhất bằng một phần năm cạnh dài nhất",
  "web.files.insert_drawings_hint": "Tệp CAD, lưới đa giác, DXF hoặc SVG vào thiết kế đang mở",
  "web.files.insert_stored_drawings_hint": "Vào thiết kế đang mở (tệp CAD, lưới đa giác, DXF, SVG)",
  "web.open_full": "Mở trong SolidCraft",
@@ -957,8 +957,6 @@
  "cmd.inspect_accessibility": "可達性分析",
  "cmd.inspect_center_of_mass": "質心",
  "cmd.inspect_clearance": "間隙",
-  "cmd.inspect_colored_components": "啟用元件顏色",
-  "cmd.inspect_colored_components_disable": "停用元件顏色",
  "cmd.inspect_compare": "比較實體",
  "cmd.inspect_compare_picture": "與圖片比較",
  "cmd.inspect_continuity": "連續性分析",
@@ -1366,11 +1364,14 @@
  "dialog.computing": "正在計算… {seconds} 秒",
  "dialog.could_not_be_checked": "無法檢查",
  "dialog.custom_axis": "↖ 自訂軸",
+  "dialog.cylinder_face_tip": "圓柱體所立的模型面或頂點：先點擊此處，再在視圖中點擊它。留空時由 X、Y、Z 放置。",
  "dialog.dimension_insert_hint": "點擊其他驅動尺寸以插入其名稱",
  "dialog.dimension_name": "尺寸：{name}",
  "dialog.edit_title": "編輯 {title}",
  "dialog.no_shown_body": "沒有可變更的已顯示實體：請顯示一個，或選擇「新建實體」",
  "dialog.pattern_sketch_not_object": "請選取實體或特徵：草圖兩者皆非。請用草圖自己的「陣列」或「鏡射」重複其曲線，或先將它擠出。",
+  "dialog.primitive_point_tip": "填入 X、Y、Z 的點：先點擊此處，再點擊模型的頂點、邊或面、草圖中的點，或原點。",
+  "dialog.reference_edge_tip": "所選面上的一條直邊，下方的距離從它量起：先點擊此處，再點擊該邊。",
  "dialog.select": "↖ 選擇",
  "dialog.selected_count": "↖ 已選擇 {count} 個",
  "dialog.selection_constraint": "拘束 {id}",
@@ -1623,7 +1624,7 @@
  "help.sketch.insert_svg": "將 SVG 圖形的路徑讀入草圖，並依您的設定縮放、旋轉和放置。用於把標誌或向量輪廓轉成可擠出的曲線。",
  "help.sketch.inspect": "開啟目前草圖的報告：還剩多少個自由度，以及是否已完全拘束。用於在完成草圖之前找出哪些部分仍會移動。",
  "help.sketch.intersect": "加入實體、面、邊或其他草圖與草圖平面相交的曲線或點。它們保持連結，並在模型變更時跟隨。",
-  "help.sketch.intersection_curve": "在兩個實體或面相接處建立 3D 曲線，並與它們連結。用作跟隨模型的路徑或導軌。",
+  "help.sketch.intersection_curve": "在兩個實體、面或其他草圖的曲線相接處建立 3D 曲線，並與它們連結。用作跟隨模型的路徑或導軌。",
  "help.sketch.isoparametric_curve": "通過您選取的點，沿面的 U 或 V 方向建立 3D 曲線，並與該面連結。用作跟隨曲面的路徑或分割線。",
  "help.sketch.line": "逐點畫出相連的直線，可為開放的鏈或封閉的輪廓。這是大多數輪廓的基本工具。",
  "help.sketch.line.midpoint": "從中點向一端畫直線，另一端對稱映射。用於以一點為中心的直線，例如對稱的邊。",
@@ -3812,6 +3813,8 @@
  "sample.plate.name": "範例板",
  "sample.vents.about": "依矩形陣列排列的槽：列數、欄數和間距均為參數",
  "sample.vents.name": "通風板",
+  "scale.per_axis": "依軸",
+  "scale.uniform": "等比",
  "search.command_keys": "Enter 執行     Shift+Enter 執行並保持開啟     Esc 關閉",
  "search.commands": "命令",
  "search.design": "此設計中",
@@ -4442,6 +4445,7 @@
  "ui.click_selects_whole_bodies": "點擊選擇整個實體",
  "ui.click_then_press_key": "點擊，然後按新按鍵",
  "ui.close": "關閉",
+  "ui.close_tab": "關閉分頁",
  "ui.coil": "線圈",
  "ui.coincident": "重合",
  "ui.collapse": "摺疊",
@@ -85,6 +85,7 @@
  "Bottom Right": "右下",
  "Boundary": "边界",
  "Bounding box": "边界框",
+  "Bridge": "桥接",
  "CHECK": "检查",
  "COMPONENTS": "组件",
  "CONFIGURATIONS": "配置",
@@ -628,6 +629,8 @@
  "Suppress Selected Folders": "抑制所选文件夹",
  "Suppressed": "已抑制",
  "Surface": "曲面",
+  "Surface or face": "曲面或面",
+  "Surface or faces": "曲面或面",
  "Surface, or faces to turn over": "曲面，或要翻转的面",
  "Surfaces": "曲面",
  "Swap Ends": "交换端点",
@@ -641,6 +644,7 @@
  "Target": "目标",
  "Target Body": "目标实体",
  "Target Face (optional)": "目标面（可选）",
+  "Target edges": "目标边",
  "Tear": "撕裂",
  "Technical details": "技术详情",
  "The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "虚线草图是已保存的平面引导。选择一个新面以修复附着。",
@@ -648,6 +652,7 @@
  "The direction must be an axis or a straight sketch curve that lies in the sketch plane": "方向必须是轴，或位于草图平面内的直线草图曲线",
  "The mirror line cannot also be mirrored": "镜像线本身不能再被镜像",
  "The mirror line must be a straight curve of this sketch, not an origin axis": "镜像线必须是此草图中的直线曲线，不能是原点轴",
+  "The origin axis is perpendicular to the sketch plane, so it has no line in the plane": "原点轴垂直于草图平面，因此在该平面内没有直线",
  "The saved author occurrence is missing. Select a valid author placement before rebinding.": "保存的作者实例缺失。重新绑定前请选择有效的作者放置。",
  "Then": "操作",
  "These features will be deleted:": "以下特征将被删除：",
@@ -739,6 +744,9 @@
  "a picked edge's body is gone": "所选边所属的实体已不存在",
  "add a key for a joint first": "请先为接头添加关键帧",
  "ai.connected_toast": "SolidCraft 现已可在 {clients} 中使用。请重启它们（设置 > 助手）。",
+  "ai.http.allow": "允许不安全的 HTTP",
+  "ai.http.confirm": "允许此端点",
+  "ai.http.warning": "API 密钥和对话将以未加密的方式发送。任何能够访问该网络的人都可能读取或篡改它们。请仅在可信网络上使用。",
  "ai.prefs.allow_control": "允许AI代理连接",
  "ai.prefs.allow_control_note": "本地通道（MCP）。任何内容都不会离开此计算机。\n\n仅在本机开放控制通道（127.0.0.1，端口 27878 或下一个空闲端口）。连接的程序还必须出示一个每次启动时新生成、只有你的用户账户能读取的秘密令牌。下次启动 SolidCraft 时生效。关闭：除非用 --control 启动，否则不监听任何端口。",
  "ai.prefs.availability": "可用性",
@@ -750,6 +758,8 @@
  "ai.prefs.follow_camera": "跟随相机",
  "ai.prefs.follow_camera_off": "相机自动跟随已关闭。",
  "ai.prefs.follow_camera_on": "相机将转向代理创建的草图。",
+  "ai.prefs.instructions": "自定义指令",
+  "ai.prefs.instructions_note": "在每次对话开始时发送给代理，位于 SolidCraft 自身的指令之后：你喜欢的工作方式、需要遵守的规则。更改从下一次对话（连接或新对话）起生效。",
  "ai.prefs.intro": "SolidCraft中的AI代理。",
  "ai.prefs.make_default": "设为默认",
  "ai.prefs.no_agents": "尚无代理。添加代理或刷新以查找已安装的代理。",
@@ -963,8 +973,7 @@
  "cmd.inspect_analysis": "视图分析",
  "cmd.inspect_center_of_mass": "质心",
  "cmd.inspect_clearance": "间隙",
-  "cmd.inspect_colored_components": "启用组件颜色",
-  "cmd.inspect_colored_components_disable": "禁用组件颜色",
+  "cmd.inspect_colored_components": "组件颜色",
  "cmd.inspect_compare": "比较实体",
  "cmd.inspect_compare_picture": "比较参考图",
  "cmd.inspect_continuity": "连续性分析",
@@ -1081,6 +1090,9 @@
  "cmd.render.compare.divider": "移动渲染比较分隔线",
  "cmd.render.result.discard": "丢弃渲染结果",
  "cmd.render.result.select": "选择渲染结果",
+  "cmd.render.surface.import": "导入表面贴图",
+  "cmd.render.texture.list": "列出嵌入的表面图像",
+  "cmd.render.texture.remove": "移除嵌入的表面图像",
  "cmd.render_aging_describe": "分层表面老化",
  "cmd.render_backends": "渲染后端",
  "cmd.render_batch": "渲染所有镜头",
@@ -1296,6 +1308,7 @@
  "cmd.timeline_stop": "停止历史播放",
  "cmd.timeline_suppress": "抑制特征",
  "cmd.ui.assistant": "切换助手显示",
+  "cmd.view.navigator": "自定义视图导航器",
  "cmd.view.render_browser": "渲染浏览器",
  "cmd.view.render_dock": "移动渲染停靠面板",
  "cmd.view.render_focus": "渲染专注视图",
@@ -1323,6 +1336,7 @@
  "cmd.view_previous_tab": "上一个标签页",
  "cmd.view_rename": "重命名命名视图",
  "cmd.view_render_frame": "渲染构图辅助线",
+  "cmd.view_ribbon_tabs_only": "仅功能区选项卡",
  "cmd.view_right": "右视图",
  "cmd.view_save": "新建命名视图",
  "cmd.view_shots_strip": "镜头条",
@@ -1394,15 +1408,22 @@
  "dialog.computing": "正在计算… {seconds} 秒",
  "dialog.could_not_be_checked": "无法检查",
  "dialog.custom_axis": "↖ 自定义轴",
+  "dialog.cylinder_face_tip": "圆柱体所立的模型面或顶点：先单击此处，再在视图中单击它。留空时由 X、Y、Z 放置。",
  "dialog.dimension_insert_hint": "单击其他驱动尺寸以插入其名称",
  "dialog.dimension_name": "尺寸：{name}",
+  "dialog.dimension_step_down": "减少 {step}",
+  "dialog.dimension_step_expression": "只有数字可以增减；表达式保持不变",
+  "dialog.dimension_step_up": "增加 {step}",
  "dialog.edit_title": "编辑 {title}",
  "dialog.no_shown_body": "没有可更改的显示实体：请显示一个实体，或选择新建实体",
  "dialog.pattern_sketch_not_object": "请选择实体或特征：草图两者都不是。请用草图自身的阵列或镜像重复其曲线，或先将其拉伸。",
+  "dialog.primitive_point_tip": "填入 X、Y、Z 的点：先单击此处，再单击模型的顶点、边或面、草图中的点，或原点。",
+  "dialog.reference_edge_tip": "所选面上的一条直边，下方的距离从它量起：先单击此处，再单击该边。",
  "dialog.select": "↖ 选择",
  "dialog.selected_count": "↖ 已选择 {count} 个",
  "dialog.selection_constraint": "约束 {id}",
  "dialog.selection_external_curve": "{sketch} · 曲线 {id}",
+  "dialog.selection_external_point": "{point} · {sketch}",
  "dialog.selection_guidance": "选择输入项进行修改。点击已选对象可取消选择；按住 Ctrl/Cmd 点击也可切换选择。检查预览后，再按“确定”。",
  "dialog.selection_midpoint": "中点 · {id}",
  "dialog.selection_profile": "{sketch} · 轮廓 {number}",
@@ -1420,6 +1441,7 @@
  "document.read_only_save": "此设计以只读方式打开：请另存为新文件",
  "document.save_changes": "保存对 {name} 的更改？",
  "document.save_copy": "保存副本…",
+  "document.tab_unsaved_changes": "未保存的更改",
  "document.unsaved_changes": "{name} 有未保存的更改。如果不保存，将丢失这些更改。",
  "drive.rigid": "{joint} 是刚性接头：它把零件固定在原位，因此没有可驱动的运动。要让零件运动，请在“编辑接头”中更改其类型：旋转用 Revolute，滑动用 Slider，两者兼有用 Cylindrical。",
  "drive.stopped_by_contact": "停在 {value}：{a} 会穿过 {b}",
@@ -1440,10 +1462,16 @@
  "each rail's curves must be in one sketch": "每条导轨的曲线必须位于同一个草图中",
  "feature computation ended without a result": "特征计算结束时没有返回结果",
  "file.open.drawing_filter": "设计、CAD 文件、网格和图纸",
+  "file.open.portal_fallback.no_portal_service": "打开的文件选择器并非桌面自带：桌面的文件选择服务不可用。",
+  "file.open.portal_fallback.no_session_bus": "打开的文件选择器并非桌面自带：没有 D-Bus 会话总线。",
+  "file.open.portal_fallback.xwayland": "打开的文件选择器并非桌面自带：在 XWayland 下，门户会拒绝父窗口。",
  "file_load.built": "已构建：{built}/{total} 个特征。",
  "file_load.converting": "正在转换实体 {done}/{total}",
+  "file_load.inserted": "已插入 {name}",
  "file_load.inserting": "正在插入几何体",
  "file_load.link_item": "{name} ({done}/{total})",
+  "file_load.opened": "已打开 {name}",
+  "file_load.opened_in_tab": "已在新标签页中打开 {name}",
  "file_load.opening": "正在打开设计",
  "file_load.preparing_thumbnail": "正在准备缩略图...",
  "file_load.preparing_view": "正在准备视图...",
@@ -1679,7 +1707,7 @@
  "help.sketch.insert_svg": "将 SVG 图形中的路径读入草图，并按设定进行缩放、旋转和放置。用于把标志或矢量轮廓变成可拉伸的曲线。",
  "help.sketch.inspect": "打开当前草图的报告：显示剩余的自由度以及是否已完全约束。在完成草图之前，用它找出仍然可以移动的部分。",
  "help.sketch.intersect": "添加实体、面、边或其他草图与草图平面相交处的曲线或点。它们保持关联，并随模型变化。",
-  "help.sketch.intersection_curve": "在两个实体或面相交处创建与它们关联的三维曲线。用作跟随模型的路径或导轨。",
+  "help.sketch.intersection_curve": "在两个实体、面或其他草图的曲线相交处创建与它们关联的三维曲线。用作跟随模型的路径或导轨。",
  "help.sketch.isoparametric_curve": "通过你选取的点，沿面的 U 或 V 方向创建与该面关联的三维曲线。用作跟随曲面的路径或分割线。",
  "help.sketch.line": "逐点绘制相连的直线，可以是开放链或封闭轮廓。这是绘制大多数轮廓的基本工具。",
  "help.sketch.line.midpoint": "从中点向一端绘制直线，另一端随之对称生成。用于以某点为中心的直线，例如对称的边。",
@@ -1785,6 +1813,7 @@
  "help.view.navigate": "按步骤旋转、平移或缩放视图，例如向左转四分之一圈。用于精确移动相机，而不是靠拖动。",
  "help.view.navigation_bar": "显示或隐藏视口底部的导航栏。隐藏可腾出空间，显示便于用鼠标使用视图工具。",
  "help.view.rename": "为已保存的命名视图改名。视图本身保持不变。",
+  "help.view.ribbon_tabs_only": "将功能区折叠为选项卡行，让视图得到面板原先占用的空间。单击选项卡可在视图上方显示其面板；再次选择此命令则始终显示完整的功能区。",
  "help.view.save": "将当前相机位置作为命名视图保存到设计中。用于以后回到同一角度，例如截图。",
  "help.view.spin": "让视图持续绕模型环绕，直到下一次点击或按键。用于从各个方向展示模型。",
  "help.view.tool": "锁定一个相机工具（环绕、平移或缩放），之后用鼠标左键拖动即可移动视图，直到关闭。用于触控板或没有鼠标中键时。",
@@ -1999,6 +2028,7 @@
  "material.selection.mixed": "不同材料",
  "measure.at": "位置",
  "measure.item": "项目 {number}",
+  "measure.line_to_centre": "线到圆心",
  "measure.quick_copied": "已复制测量值",
  "measure.quick_copy": "点击复制测量值",
  "measure.quick_edges": "{count} 条边",
@@ -2029,6 +2059,8 @@
  "nav.blender.help": "中键拖动旋转，Shift+中键拖动平移，Ctrl+中键拖动缩放；右键拖动不会移动相机",
  "nav.creo.help": "中键拖动旋转，Shift+中键平移，Ctrl+中键上下拖动缩放（向下放大）；滚动滚轮也可缩放",
  "nav.creo.label": "Creo",
+  "nav.drag_keeps_mode.help": "中键或右键拖动会保持开始时的旋转、平移或缩放，直到松开按键，期间按下或松开任何键都不会改变。关闭后：拖动的每一刻都由当时按住的键决定。",
+  "nav.drag_keeps_mode.label": "拖动保持开始时的导航方式",
  "nav.free_orbit.help": "鼠标和3D鼠标可保持滚转并越过两个极点旋转。Shift轴吸附将被禁用。",
  "nav.free_orbit.label": "自由旋转",
  "nav.free_orbit.snap_help": "鼠标和3D鼠标可越过两极旋转，并保留画面旋转角度。在拖动环绕时按住Shift，可吸附视图方向和画面旋转角度。",
@@ -2265,6 +2297,17 @@
  "prefs.auto_operation_note": "根据材料接触的对象选择合并、新建实体或切割。",
  "prefs.axes": "坐标轴",
  "prefs.axis": "轴",
+  "prefs.background_choose": "选择图片…",
+  "prefs.background_image": "图片",
+  "prefs.background_unreadable": "无法读取背景图片",
+  "prefs.blur_cost": "相对渲染开销。条形越多，通常意味着处理工作越多。",
+  "prefs.blur_device": "此图形设备或渲染路径不支持此功能",
+  "prefs.blur_guard": "已降低模糊质量，以保持画面响应。模糊半径未改变。",
+  "prefs.blur_off": "关闭",
+  "prefs.blur_reduce_transparency": "已被系统的降低透明度设置禁用",
+  "prefs.blur_software": "软件图形渲染不支持此功能 (gpu-software)",
+  "prefs.blur_source": "此工作区视图不支持此功能",
+  "prefs.blur_web": "此网页渲染路径不支持此功能",
  "prefs.bodies_folders": "实体文件夹",
  "prefs.bodies_folders_always": "始终显示",
  "prefs.bodies_folders_never": "不显示",
@@ -2278,6 +2321,8 @@
  "prefs.browser_eye_left": "折叠箭头旁的眼睛图标",
  "prefs.browser_eye_left_note": "浏览器各行的显示切换像以前一样位于折叠箭头旁，而不是在行右端的一列中。",
  "prefs.browser_reveal_on_hover": "悬停时显示",
+  "prefs.browser_rows_start_closed": "浏览器中的行默认折叠",
+  "prefs.browser_rows_start_closed_note": "浏览器中的放置和文件夹默认折叠，因此包含大量组件的设计只显示顶层行。每一行可通过其箭头、“全部展开”或“在浏览器中查找”打开；“在浏览器中查找”只展开通往该实体的行，并重新折叠上次查找展开的行。在 3D 视图中选取实体不会改变浏览器。关闭时文件夹默认展开，放置按“组件初始展开”的设置显示，在 3D 视图中选取会使浏览器展开到该实体，与以前相同。",
  "prefs.browser_show_note": "“显示”让浏览器始终留在屏幕上。“悬停时显示”会将其隐藏，直到指针移到它的位置或其左边缘的细标签上；指针在其中或其菜单打开时，它保持打开。",
  "prefs.browser_shown": "显示",
  "prefs.built_in": "内置",
@@ -2288,6 +2333,7 @@
  "prefs.carousel_previous": "上一个",
  "prefs.choose_font": "选择字体文件…",
  "prefs.click": "单击",
+  "prefs.command_dialog_values": "命令对话框",
  "prefs.contact_shading": "柔和接触阴影",
  "prefs.contact_shading_note": "在零件相近处添加柔和阴影。",
  "prefs.context_menu": "上下文菜单",
@@ -2323,6 +2369,13 @@
  "prefs.dialogs_edge": "视图边缘",
  "prefs.dialogs_left_column": "左侧栏",
  "prefs.dialogs_note": "命令对话框的打开位置：停靠在视图边缘，或在左侧栏中替代浏览器和历史；关闭对话框后，浏览器和历史恢复原样。",
+  "prefs.dimension_step_angle": "窗口的箭头、上下方向键和滚轮给角度增减的量",
+  "prefs.dimension_step_length": "窗口的箭头、上下方向键和滚轮给长度增减的量",
+  "prefs.dimension_steps": "窗口步长",
+  "prefs.dimension_values": "尺寸值",
+  "prefs.dimension_values_note": "输入尺寸值的位置。窗口带有可增减数值的箭头；尺寸工具会先放置文字。",
+  "prefs.dimension_values_view": "在视图中",
+  "prefs.dimension_values_window": "在窗口中",
  "prefs.display": "显示",
  "prefs.edges": "边缘与着色",
  "prefs.extend": "扩展",
@@ -2376,6 +2429,8 @@
  "prefs.graphics_page.surfaces_edges": "曲面与边",
  "prefs.graphics_page.view_bar": "也可在视图栏中设置",
  "prefs.graphics_presets_note": "预设会同时设置以下选项。",
+  "prefs.ground_shadow_follows_model": "地面阴影跟随模型",
+  "prefs.ground_shadow_follows_model_help": "将阴影放在可见实体的最低点下方。关闭时，抬高模型的阴影仍位于经过原点的地面上。",
  "prefs.hide_constraint_glyphs_zoomed_out": "缩小时隐藏约束符号",
  "prefs.hide_constraint_glyphs_zoomed_out_note": "草图缩小到一定程度时隐藏约束符号，以免遮挡草图。关闭：任意缩放比例下符号仍保持固定屏幕大小。",
  "prefs.history": "历史",
@@ -2402,6 +2457,10 @@
  "prefs.invert_curved_roll_arrows_note": "立方体角落的两个弯曲箭头在屏幕平面内翻滚视图。开启：顺时针箭头逆时针翻滚，逆时针箭头顺时针翻滚。关闭：每个箭头按其弯曲方向翻滚视图。",
  "prefs.invert_navigator_arrows": "反转视图立方体的旋转箭头",
  "prefs.invert_navigator_arrows_note": "立方体周围的箭头按箭头所指的方向转动相机，与 Fusion 和 Inventor 相同：左侧箭头指向右，相机向右转动。关闭：箭头把立方体转向它所在的那一面，因此左侧箭头使相机向左转动。弯曲的翻滚箭头不受影响。",
+  "prefs.keep_unsaved_also_asks": "关闭标签页时仍然询问",
+  "prefs.keep_unsaved_also_asks_tip": "关闭此项后，只要每个未保存设计的副本都是最新的，标签页就会直接关闭，不显示浏览器的提示框。",
+  "prefs.keep_unsaved_in_browser": "在此浏览器中保留未保存的工作",
+  "prefs.keep_unsaved_in_browser_tip": "每个打开的设计的未保存更改都会在此浏览器的私有存储中保持最新。下次访问时会提示恢复。",
  "prefs.keep_work_on_tab_switch": "切换设计时保持对话框和工具打开",
  "prefs.keep_work_on_tab_switch_note": "每个设计标签页保留其打开的对话框或工具（包括其中已选择和输入的内容）以及工具栏选项卡。回到该设计时它们仍在原处。关闭时：切换设计会取消它们并显示“模型”选项卡。",
  "prefs.labels": "标签",
@@ -2413,6 +2472,8 @@
  "prefs.layout_page.card": "卡片",
  "prefs.layout_page.column": "列",
  "prefs.layout_page.hover": "悬停",
+  "prefs.layout_page.hover_panel_menus": "悬停切换面板菜单",
+  "prefs.layout_page.hover_panel_menus_help": "点击功能区的面板名称打开菜单。将指针悬停在另一面板名称上即可切换菜单。将指针移到功能区和已打开菜单之外即可关闭菜单。",
  "prefs.layout_page.icons_labels": "图标＋标签",
  "prefs.layout_page.ok_cancel": "确定和取消",
  "prefs.layout_page.on_hover": "悬停时",
@@ -2515,6 +2576,8 @@
  "prefs.quality_smoother": "更平滑",
  "prefs.quick_measure": "在视图角落显示快速测量",
  "prefs.quick_measure_note": "在视图右下角、历史记录上方显示所选对象的尺寸：边的长度（圆形边显示 Ø 和 R）、面的面积、点的位置、两个对象之间的距离和角度、多条边或多个面的总和。点击即可复制。",
+  "prefs.remember_dialog_values": "记住命令对话框的值",
+  "prefs.remember_dialog_values.help": "默认关闭。开启后，命令成功执行后，在关闭 SolidCraft 前，下次打开同一命令时会重用其安全的值和选项。",
  "prefs.render_previous_geometry_budget": "使用先前的渲染预览几何内存预算",
  "prefs.render_previous_geometry_budget_help": "恢复先前的固定几何内存上限（64位桌面为512 MiB，其他平台为128 MiB），替代基于设备的预算。",
  "prefs.reports_saved": "已保存 {n} 份",
@@ -2523,6 +2586,8 @@
  "prefs.ribbon_click_ends_tool_note": "单击正在使用的草图工具的高亮功能区按钮会结束该工具，在视图中单击即可再次选择。关闭：单击会重新启动该工具。",
  "prefs.ribbon_reveal": "在功能区中显示搜索结果",
  "prefs.ribbon_reveal_note": "将指针悬停在“搜索命令”的结果上时，会显示该命令在功能区中的位置：其选项卡、按钮或面板下拉菜单中的行。从搜索启动的命令会在那里闪烁，从下拉菜单运行的命令会标记其面板。",
+  "prefs.ribbon_tabs_only": "仅显示功能区的选项卡",
+  "prefs.ribbon_tabs_only_note": "功能区折叠为选项卡行。单击选项卡会在视图上方显示其面板，直到命令开始或指针离开面板。“视图”选项卡中的“仅功能区选项卡”或其快捷键可切换此项。",
  "prefs.right_click": "右键单击",
  "prefs.saving": "启动和保存",
  "prefs.scale_note": "也可在窗口中使用 Ctrl + / Ctrl −。100% 时按钮高度为 28 像素。",
@@ -2533,6 +2598,8 @@
  "prefs.section_hatch_by_part": "按零件",
  "prefs.section_hatch_one": "单一样式",
  "prefs.select": "选择",
+  "prefs.select_hidden_edges": "在带隐藏边线的着色视图中选择隐藏边",
+  "prefs.select_hidden_edges_help": "在带隐藏边线的着色视图中，可穿过面选择边并用于圆角。关闭时保留v0.30.1的选择行为。隐藏的实体仍不可选择。",
  "prefs.select_one_item": "选择一个项目",
  "prefs.select_other_hidden": "使用“选择其他”选择隐藏几何体",
  "prefs.select_other_hidden_help": "开启：包括指针附近的隐藏实体、草图和被遮挡的边。关闭：恢复原来的列表，仅包含指针正下方的可见几何体。",
@@ -2557,6 +2624,8 @@
  "prefs.sketch.click_selects": "单击选择",
  "prefs.sketch.conflict_colour": "冲突颜色",
  "prefs.sketch.drawing": "绘制",
+  "prefs.sketch.ellipse_axes": "绘制椭圆时带上轴线",
+  "prefs.sketch.ellipse_axes_note": "将长轴和短轴绘制为构造线，以便标注半轴和轴。关闭：仅绘制椭圆，对其按 D 得到短半径，无论将数值拖到何处，都像以前一样绘制并标注 R。",
  "prefs.sketch.exit_keep": "保持",
  "prefs.sketch.exit_previous": "返回之前的视图",
  "prefs.sketch.exit_unless_rotated": "除非已旋转",
@@ -2650,6 +2719,10 @@
  "prefs.theme_follow_off": "关闭",
  "prefs.theme_follow_stop": "停止跟随",
  "prefs.theme_import_hint": "单击选择主题文件，拖放到此处，或复制主题后按 Ctrl+V（Mac 上为 Cmd+V）",
+  "prefs.theme_notice_dismiss": "忽略",
+  "prefs.theme_option_blur": "面板背后模糊",
+  "prefs.theme_option_blur_help": "半透明面板背后的模糊程度，以物理像素为单位。0 表示关闭。",
+  "prefs.theme_option_invalid": "{option} 的已保存值无效；正在使用主题默认值。已保存值将予以保留。",
  "prefs.theme_option_opacity": "不透明度",
  "prefs.theme_option_opacity_help": "调整浮动面板的不透明度。最低不透明度限制可确保文字在视口颜色上清晰可读。",
  "prefs.theme_option_tab_colours": "选项卡颜色",
@@ -2658,6 +2731,7 @@
  "prefs.theme_option_tab_fade_ms_help": "切换选项卡时渐变面板和视口颜色。设为零可立即切换。",
  "prefs.theme_options_badge": "选项",
  "prefs.theme_options_more": "更多 · {count}",
+  "prefs.theme_options_newer": "此主题需要更新版本的 SolidCraft。升级后，请重新导入原始主题以恢复其选项定义。",
  "prefs.theme_options_reset": "重置",
  "prefs.theme_options_unavailable": "此设备不支持",
  "prefs.theme_paste": "粘贴主题",
@@ -2721,6 +2795,12 @@
  "recovery.just_now": "刚刚",
  "recovery.min_ago": "{count} 分钟前",
  "recovery.never_saved": "从未保存",
+  "recovery.open_saved": "打开已保存的版本",
+  "recovery.restore": "恢复",
+  "recovery.restore_intro": "此页面上次关闭时未保存的更改保留在此浏览器中。",
+  "recovery.restore_row": "{name}，更改于{when}",
+  "recovery.restore_title": "恢复未保存的设计？",
+  "recovery.restore_title_one": "恢复未保存的设计：{name}，更改于{when}？",
  "refused.change": "无法更改 {body}。",
  "refused.cut": "无法切割 {body}。",
  "refused.face_curved": "它的一个曲面无法用于建模。",
@@ -3242,9 +3322,11 @@
  "render.frame_wide": "16:9 · 宽屏",
  "render.gpu_depth": "最大路径深度",
  "render.gpu_options_help": "采样数、深度、种子和曝光会随此配置保存。仅保存当前图像方法。",
+  "render.gpu_path_crashed": "上次在此图形适配器上设置时 SolidCraft 关闭了，很可能是在图形驱动程序内部，因此不会再自动设置。请改用 CPU 光线追踪，或重试（更新驱动程序后也会重试）。",
  "render.gpu_path_failed": "GPU 路径追踪器不可用",
  "render.gpu_path_first_setup": "首次在此 GPU 上设置可能需要几分钟，期间 SolidCraft 仍可正常使用。之后启动时，如果驱动程序保留了已编译的着色器，将直接复用。",
  "render.gpu_path_preparing": "GPU 路径追踪器：正在编译着色器…",
+  "render.gpu_path_retry": "重试",
  "render.gpu_seed": "随机种子",
  "render.gpu_unavailable": "此设备上的 GPU 路径追踪尚未就绪。",
  "render.ground_apply": "适配并保存地面",
@@ -3858,6 +3940,7 @@
  "render.stage_panels.extent": "范围",
  "render.stage_panels.fit_save": "适配并保存",
  "render.stage_panels.gpu_required": "需要 GPU 路径追踪",
+  "render.stage_panels.grain_angle": "木纹角度",
  "render.stage_panels.keep": "保留",
  "render.stage_panels.kept": "保留",
  "render.stage_panels.kept_fields": "相机、采样、图像尺寸、光学绑定、CAD 几何体和工程属性。",
@@ -3976,6 +4059,19 @@
  "render.subsurface_enable": "内部散射随机游走",
  "render.subsurface_help": "仅适用于封闭介质。散射和RGB吸收使用独立的每毫米系数。路径在实际几何内部散射，并在边界折射或反射。关闭直线透射阴影、表面降噪和外部体积；使用一个菲涅耳分层。这不是扩散着色器、密度网格或实测材料。高密度可能需要更多样本和路径深度。",
  "render.subsurface_rate": "散射碰撞率",
+  "render.surface_import.author": "作者",
+  "render.surface_import.busy": "正在导入图像…",
+  "render.surface_import.complete": "请选择图像并填写作者、来源和许可。",
+  "render.surface_import.embedded": "导入的图像",
+  "render.surface_import.failed": "图像导入未完成。",
+  "render.surface_import.license": "许可 / 所有权",
+  "render.surface_import.raytrace_required": "图像需要 CPU 或 GPU 光线追踪。请在输出中选择。",
+  "render.surface_import.repeat_u": "U 方向重复",
+  "render.surface_import.repeat_v": "V 方向重复",
+  "render.surface_import.save": "将图像保存到实体",
+  "render.surface_import.saved_cpu": "保存贴图以用于 CPU 渲染。",
+  "render.surface_import.source": "来源",
+  "render.surface_import.title": "导入图像",
  "render.tone_aces_fitted": "ACES 拟合",
  "render.tone_reinhard": "Reinhard",
  "render.transmission_scope": "GPU 玻璃支持经过验证且互不相交的介质；不支持任意嵌套介质，也不提供无噪声透射估计器。",
@@ -4052,6 +4148,8 @@
  "sample.plate.name": "示例板",
  "sample.vents.about": "按矩形阵列排列的槽：行数、列数和间距均为参数",
  "sample.vents.name": "通风板",
+  "scale.per_axis": "按轴",
+  "scale.uniform": "等比",
  "search.command_keys": "Enter 运行     Shift+Enter 运行并保持打开     Esc 关闭",
  "search.commands": "命令",
  "search.design": "此设计中",
@@ -4142,6 +4240,32 @@
  "sketch.dof_left": "剩余 {count} 个自由度",
  "sketch.dof_left_one": "剩余 {count} 个自由度",
  "sketch.draw_curves": "绘制为 {linetype}",
+  "sketch.error.closed_curve_two_crossings": "a closed curve needs two crossings to trim",
+  "sketch.error.nothing_to_break": "nothing to break here",
+  "sketch.error.offset_fillet_chamfer": "`{id}` is an offset, and its corners follow its source curves: round or cut the source corners before offsetting, or break the offset association first",
+  "sketch.error.offset_trim": "`{id}` is an offset, and its ends follow its source curves: edit the source curves instead, or break the offset association first",
+  "sketch.hint.arc.center_point": "Arc: click center and start, go round either way and click the end, or type a signed sweep",
+  "sketch.hint.arc.three_point": "Arc: click start, end, then a point on the arc",
+  "sketch.hint.arc3d": "3D Arc: click start, end, then a point on the arc (points may leave the sketch plane)",
+  "sketch.hint.break": "Break: click a curve where it should split",
+  "sketch.hint.circle.center": "Circle: click the center, then a point on the circle",
+  "sketch.hint.constraint.generic": "Constraint: pick the sketch entities",
+  "sketch.hint.constraint.horizontal_vertical": "Horizontal/Vertical: pick a line, two points, or a point and a line; hold Shift to pick a line midpoint",
+  "sketch.hint.constraint.midpoint": "MidPoint: pick a point and a line, or two lines to center the second on the first",
+  "sketch.hint.dimension": "Dimension: pick one or two entities and type the value (or click to place it first); click a dimension to edit it; Enter applies",
+  "sketch.hint.extend": "Extend: click a curve near the end to extend (Shift: click two curves to extend both to where they meet)",
+  "sketch.hint.fallback": "Click in the sketch",
+  "sketch.hint.line": "Line: click points; right-click or Esc to finish",
+  "sketch.hint.line3d": "3D Line: click world points; right-click or Esc to finish (points may leave the sketch plane)",
+  "sketch.hint.open_done": "Open done",
+  "sketch.hint.point3d": "3D Point: click where a 3D point goes",
+  "sketch.hint.rectangle.center": "Center rectangle: click the center, then a corner",
+  "sketch.hint.rectangle.rounded": "Rounded rectangle: click two opposite corners (Tab to the radius box to type the corner radius)",
+  "sketch.hint.rectangle.three_point": "3-point rectangle: click two points of one edge, then the width",
+  "sketch.hint.rectangle.two_point": "Rectangle: click two opposite corners",
+  "sketch.hint.slot": "Slot: click both ends, then the width",
+  "sketch.hint.spline3d": "3D Spline: click fit points in 3D; right-click or Esc to finish",
+  "sketch.hint.trim": "Trim: click the piece of a curve to remove, or drag across the pieces to remove",
  "sketch.make_selection": "将选择转换为 {linetype}",
  "sketch.open_ends": "开放 {count}",
  "sketch.status_conflict": "约束冲突",
@@ -4363,6 +4487,7 @@
  "ui.3d_sketch": "3D 草图",
  "ui.activate": "激活",
  "ui.active_component": "活动组件",
+  "ui.addToQuickAccess": "添加到快速访问",
  "ui.add_configuration": "添加配置",
  "ui.add_parameter": "添加参数",
  "ui.agent_chat": "智能体聊天",
@@ -4697,6 +4822,7 @@
  "ui.click_selects_whole_bodies": "单击选择整个实体",
  "ui.click_then_press_key": "单击，然后按新按键",
  "ui.close": "关闭",
+  "ui.close_tab": "关闭标签页",
  "ui.coil": "螺旋",
  "ui.coincident": "重合",
  "ui.collapse": "折叠",
@@ -4784,6 +4910,7 @@
  "ui.default_modelling_orientation": "默认建模方向",
  "ui.delete": "删除",
  "ui.delete_select_first": "请先选择要删除的内容：特征、实体、组件或草图几何",
+  "ui.dependents_select_first": "请先选择要列出其依赖项的对象",
  "ui.depth": "深度",
  "ui.design": "设计",
  "ui.design_properties.author": "作者",
@@ -4913,6 +5040,11 @@
  "ui.factor": "系数",
  "ui.fade": "收尾",
  "ui.fade_length": "收尾长度",
+  "ui.fair_iterations": "迭代次数",
+  "ui.fair_keep_edges": "保持边",
+  "ui.fair_strength": "强度",
+  "ui.fair_surface_title": "曲面光顺",
+  "ui.fair_tolerance_default": "实体尺寸的 0.001 倍",
  "ui.feature_history": "特征历史",
  "ui.feature_options": "特征选项",
  "ui.features": "特征",
@@ -4941,6 +5073,10 @@
  "ui.fillet_setback_least": "须大于 {least}",
  "ui.fillet_setback_tip": "平滑角点曲面片开始的位置：从角点沿每条边的距离。默认值为半径的 {factor} 倍。必须大于最小后退距离（不后退时圆角相交之处；面相互垂直时即半径）。",
  "ui.fillet_smooth_radius": "半径平滑变化",
+  "ui.fillet_turn": "转角",
+  "ui.fillet_turn_mitre": "斜接",
+  "ui.fillet_turn_swept": "旋转",
+  "ui.fillet_turn_tip": "两个圆角绕过它们之间尖锐的角边处，例如凸台根部的圆角绕过其竖直边。\n斜接：圆角继续延伸，直到以斜接相遇。\n旋转：圆角止于角边并绕它旋转，转角是与两者相切的圆环面。仅用于同一半径的圆角绕过笔直的凸角边时。",
  "ui.fillet_type_choices_tip": "恒定半径：整条边一个半径。\n弦长：无论面以什么角度相交，圆角宽度都相同。\n可变半径：两端各一个半径，添加后沿边还有更多。\n曲率连续：与平面相接处反射没有折痕的截面 (G2)。\n样条：沿边的半径跟随您设置的控制半径。",
  "ui.fillet_type_curvature": "曲率连续",
  "ui.fillet_type_tip": "横跨边的截面。曲率连续：平面之间的曲率连续 (G2) 截面，反射从面平滑过渡到圆角，没有折痕。",
@@ -4986,6 +5122,7 @@
  "ui.heading_construct": "构造",
  "ui.heading_create": "创建",
  "ui.heading_create_sketch": "创建草图",
+  "ui.heading_custom_view_navigator": "自定义视图导航器",
  "ui.heading_cylinder": "圆柱体",
  "ui.heading_design": "设计",
  "ui.heading_draft": "拔模",
@@ -5093,6 +5230,7 @@
  "ui.inspect": "检查",
  "ui.instances": "实例数",
  "ui.intersect": "相交",
+  "ui.intersection_curve_second_pick": "相交曲线：单击第二个面或曲线（右键单击重新开始）",
  "ui.iso_4753": "ISO 4753",
  "ui.isolate": "隔离",
  "ui.join": "连接",
@@ -5121,6 +5259,7 @@
  "ui.manipulator_free_alt": "操纵器自由拖动也适用于 Alt/Option",
  "ui.manipulator_free_alt_tip": "开：在拉伸/小控件箭头上按 Alt/Option 或 Ctrl/Cmd 可关闭数值捕捉。关：仅 Ctrl/Cmd。",
  "ui.manufacture": "制造",
+  "ui.match_surface_title": "曲面匹配",
  "ui.material_review.axes": "材料局部坐标轴；不指定实体方向。",
  "ui.material_review.claims": "来源和许可证声明未经核实。缺失值保持未知。",
  "ui.material_review.compressive_strength": "抗压强度",
@@ -5143,6 +5282,9 @@
  "ui.material_review.title": "检查物理材料数据",
  "ui.material_review.unknown": "未知",
  "ui.material_review.yield_strength": "屈服强度",
+  "ui.mcp_agents": "通过 MCP 连接的代理",
+  "ui.mcp_compact": "紧凑输出",
+  "ui.mcp_compact_note": "适用于通过 MCP 服务器 (solidcraft-cli mcp) 连接的代理：inspect_design 汇总草图，工具结果不做美化排版，从而占用更少的 token。更改后新开始的代理会话生效；--compact 或 SOLIDCRAFT_MCP_COMPACT=1 也会开启它。",
  "ui.measure": "测量",
  "ui.mesh_format_3mf": "3MF",
  "ui.mesh_format_3mf_tagged": "带面标签的 3MF",
@@ -5184,6 +5326,7 @@
  "ui.options": "选项",
  "ui.orbit": "环绕",
  "ui.orbit_around": "环绕",
+  "ui.organize": "整理",
  "ui.orientation": "定向",
  "ui.origin": "原点",
  "ui.palette_construction_mode": "构造模式 (X)",
@@ -5228,6 +5371,7 @@
  "ui.point_cloud_add_filter": "添加筛选…",
  "ui.point_cloud_auto_range": "自动范围",
  "ui.point_cloud_color_by": "着色方式",
+  "ui.point_cloud_dots": "独立点",
  "ui.point_cloud_file_colors": "文件颜色",
  "ui.point_cloud_filter_by": "筛选依据",
  "ui.point_cloud_height_high": "最高高度",
@@ -5272,6 +5416,7 @@
  "ui.quality": "质量",
  "ui.quantity": "数量",
  "ui.quantity_2": "数量 2",
+  "ui.quick_access_full": "快速访问栏最多容纳 {count} 个命令；请先移除一个再添加",
  "ui.quit": "退出",
  "ui.radial_context_menu": "环形上下文菜单",
  "ui.radius": "半径",
@@ -5289,6 +5434,7 @@
  "ui.relink_not_linked": "此组件未链接到源设计。",
  "ui.relink_select_one": "请先选择一个链接组件或其实例。",
  "ui.relink_source_all": "重新链接源文件（所有实例）…",
+  "ui.removeFromQuickAccess": "从快速访问中移除",
  "ui.removeFromToolbar": "从工具栏移除",
  "ui.removeSection": "移除剖面",
  "ui.render": "渲染",
@@ -5297,6 +5443,8 @@
  "ui.repeat_nothing": "还没有可重复的操作：请先启动一个工具或对话框。",
  "ui.replace_with_link_done": "这些副本现在是链接设计的放置。",
  "ui.report_a_bug": "报告缺陷",
+  "ui.report_characters_left_one": "剩余 {count} 个字符",
+  "ui.report_characters_left_other": "剩余 {count} 个字符",
  "ui.reset": "重置",
  "ui.reset_all": "全部重置",
  "ui.reset_the_settings_on_this_page": "重置此页面上的设置",
@@ -5581,6 +5729,14 @@
  "values must be numbers or expressions": "值必须是数字或表达式",
  "view.auto_ortho_faces": "旋转时透视，正对表面时正交",
  "view.render_inspector": "渲染检查器",
+  "view_gizmo.arrows": "旋转箭头",
+  "view_gizmo.home": "主页按钮",
+  "view_gizmo.no_such_body": "此设计中没有该名称的实体。",
+  "view_gizmo.note": "在视图中选择一个实体。它随首选项和设置配置文件保存，并在每个设计中显示。单击它的一个面即可正视该面。",
+  "view_gizmo.texture": "纹理",
+  "view_gizmo.themed": "主题",
+  "view_gizmo.too_detailed": "对视图导航器而言过于精细（超过 10,000 个三角形）",
+  "view_gizmo.too_thin": "对视图导航器而言过于细长：最薄的一边至少要有最长一边的五分之一",
  "web.files.insert_drawings_hint": "将 CAD 文件、网格、DXF 或 SVG 插入当前设计",
  "web.files.insert_stored_drawings_hint": "插入当前设计（CAD 文件、网格、DXF、SVG）",
  "web.open_full": "在 SolidCraft 中打开",
@@ -366,6 +366,13 @@ fn fs_ao_depth(i: TOut, @builtin(front_facing) front: bool) -> AoDepth {
    return opaque_depth(i, front);
 }

+// The virtual ground preserves the viewport background; only contact occlusion is blended.
+@fragment
+fn fs_ground_ao(i: TOut) -> @location(0) vec4<f32> {
+    if (clipped(i.wp)) { discard; }
+    return vec4<f32>(0.0, 0.0, 0.0, 1.0 - occlusion(i));
+}
+
 /// The AO prepass's depth of an opaque surface's fragment.
 fn opaque_depth(i: TOut, front: bool) -> AoDepth {
    if (clipped(i.wp) || length(i.n) < 0.5) { discard; }
@@ -802,7 +809,9 @@ fn vs_line(@builtin(vertex_index) vi: u32, @location(0) a: vec3<f32>, @location(
    let sb = cb.xy / max(cb.w, 1e-6) * half;
    var dir = sb - sa;
    let len = length(dir);
-    if (len < 1e-6) { dir = vec2<f32>(1.0, 0.0); } else { dir = dir / len; }
+    // Intel OpenGL can miscompile vector/scalar division here (#8053). Scalar
+    // quotients keep the same direction and the fallback for a point.
+    if (len < 1e-6) { dir = vec2<f32>(1.0, 0.0); } else { dir = vec2<f32>(dir.x / len, dir.y / len); }
    let nrm = vec2<f32>(-dir.y, dir.x);
    // Two triangles: corners (t, side).
    var ts = array<f32, 6>(0.0, 1.0, 1.0, 0.0, 1.0, 0.0);
@@ -874,10 +883,10 @@ fn fs_line_all(i: LOut) -> @location(0) vec4<f32> {
    return out_color(i.c);
 }

-// Point clouds (`view/clouds.rs`): each point is a round dot a few pixels across, facing the
-// screen, depth-tested and written like the model's faces, so the model hides the points behind
-// it and they hide it. The cloud's style colours them by their own colour, a ramp or a palette,
-// and shows only those whose filtered values lie in its ranges or sets.
+// Point clouds and their cells (`view/clouds.rs`): dots, segments as beads (or lines when they
+// have no size) and triangles, from one record per element. The cloud's style colours them by
+// their own colour, a ramp or a palette, and shows only those whose filtered values lie in its
+// ranges or sets; values vary across an element, so a range cuts it where its value crosses an end.

 struct Cloud {
    style: vec4<f32>,               // x: colour (0 own, 1 ramp, 2 palette), y: dot size (px), z, w: ramp range
@@ -886,43 +895,88 @@ struct Cloud {
@group(1) @binding(3) var<uniform> cloud: Cloud;

 struct CIn {
-    @location(0) p: vec3<f32>,
-    @location(1) v: f32,
-    @location(2) f: vec4<f32>,
-    @location(3) rgb: vec4<f32>,
+    @location(0) a: vec3<f32>,
+    @location(1) b: vec3<f32>,
+    @location(2) c: vec3<f32>,
+    @location(8) before: vec3<f32>,
+    @location(9) after: vec3<f32>,
+    @location(3) v: vec3<f32>,
+    @location(4) f0: vec3<f32>,
+    @location(5) f1: vec3<f32>,
+    @location(10) f2: vec3<f32>,
+    @location(11) f3: vec3<f32>,
+    @location(6) size: vec2<f32>,
+    @location(7) rgb: vec4<f32>,
 };

 struct COut {
    @builtin(position) pos: vec4<f32>,
    @location(0) wp: vec3<f32>,
-    @location(1) v: f32,
-    @location(2) f: vec4<f32>,
-    @location(3) rgb: vec3<f32>,
-    @location(4) at: vec2<f32>,    // the place on its disc
-    @location(5) @interpolate(flat) has: u32,
+    @location(1) n: vec3<f32>,     // zero: not lit
+    @location(2) v: f32,
+    @location(3) f: vec4<f32>,
+    @location(4) rgb: vec3<f32>,
+    @location(5) at: vec2<f32>,    // a dot's place on its disc
+    @location(6) @interpolate(flat) has: u32,
 };

+fn cloud_out(i: CIn, w: vec3<f32>, wp: vec3<f32>, pos: vec4<f32>, n: vec3<f32>) -> COut {
+    var o: COut;
+    o.pos = pos;
+    o.wp = wp;
+    o.n = n;
+    o.v = dot(w, i.v);
+    o.f = vec4<f32>(dot(w, i.f0), dot(w, i.f1), dot(w, i.f2), dot(w, i.f3));
+    o.rgb = i.rgb.rgb;
+    o.at = vec2<f32>(0.0);
+    o.has = u32(round(i.rgb.a * 255.0));
+    return o;
+}
+
+fn behind(c: vec4<f32>) -> bool {
+    return near_z(c) < 0.0;
+}
+
@vertex
 fn vs_cloud_dot(@builtin(vertex_index) vi: u32, i: CIn) -> COut {
    var xs = array<f32, 6>(-1.0, 1.0, 1.0, -1.0, 1.0, -1.0);
    var ys = array<f32, 6>(-1.0, -1.0, 1.0, -1.0, 1.0, 1.0);
    let at = vec2<f32>(xs[vi], ys[vi]);
    let size = max(cloud.style.y, 1.0);
-    let centre = u.vp * vec4<f32>(i.p, 1.0);
-    var o: COut;
-    o.pos = vec4<f32>(centre.xy + at * size / u.screen.xy * centre.w, centre.z, centre.w);
-    // Behind the eye: nothing.
-    if (near_z(centre) < 0.0) { o.pos = vec4<f32>(0.0, 0.0, 0.0, -1.0); }
-    o.wp = i.p;
-    o.v = i.v;
-    o.f = i.f;
-    o.rgb = i.rgb.rgb;
-    o.has = u32(round(i.rgb.a * 255.0));
+    let centre = u.vp * vec4<f32>(i.a, 1.0);
+    var pos = vec4<f32>(centre.xy + at * size / u.screen.xy * centre.w, centre.z, centre.w);
+    if (behind(centre)) { pos = vec4<f32>(0.0, 0.0, 0.0, -1.0); }
+    var o = cloud_out(i, vec3<f32>(1.0, 0.0, 0.0), i.a, pos, vec3<f32>(0.0));
    // Dots under two pixels are squares: a disc that small loses its centre pixel.
    o.at = at * select(1.0, 0.0, size < 2.0);
    return o;
 }

+/// The least half-width of a segment on screen, in pixels.
+const MIN_HALF_PX: f32 = 0.75;
+
+/// The frame of a bead along `d`: along it, across it level, and up, its height axis.
+fn bead_frame(d: vec3<f32>) -> mat3x3<f32> {
+    var t = vec3<f32>(1.0, 0.0, 0.0);
+    if (length(d) > 1e-9) { t = d / length(d); }
+    var side = cross(vec3<f32>(0.0, 0.0, 1.0), t);
+    if (length(side) < 1e-6) { side = vec3<f32>(1.0, 0.0, 0.0); }
+    side = normalize(side);
+    return mat3x3<f32>(t, side, cross(t, side));
+}
+
+/// Corner `j` (0…9) of a bead's cross-section, a stadium: its place across and up, and its
+/// normal. Corners 0…4 go up the right half-disc, 5…9 down the left one, so 4–5 is the flat top
+/// and 9–0 the flat bottom.
+fn stadium(j: u32, size: vec2<f32>) -> vec4<f32> {
+    let k = j % 10u;
+    let right = k < 5u;
+    let a = -1.5707963 + 0.7853982 * f32(k % 5u) + select(3.1415927, 0.0, right);
+    let r = 0.5 * size.y;
+    let flat_half = 0.5 * max(size.x - size.y, 0.0);
+    return vec4<f32>(select(-flat_half, flat_half, right) + r * cos(a), r * sin(a), cos(a), sin(a));
+}
+
 /// Whether filter `f` keeps the value `v`.
 fn cloud_keeps(f: vec4<f32>, v: f32) -> bool {
    if (f.x < 0.5) { return true; }
@@ -931,6 +985,101 @@ fn cloud_keeps(f: vec4<f32>, v: f32) -> bool {
    return k >= 0 && k < 32 && ((bitcast<u32>(f.w) >> u32(k)) & 1u) != 0u;
 }

+/// Whether filter `f` leaves out a whole element with values `v` at its corners: all on one
+/// side of a range, or one value at every corner, not kept. A set of values with corners that
+/// differ may keep part of the element: its fragments decide.
+fn cloud_drops(f: vec4<f32>, v: vec3<f32>) -> bool {
+    if (f.x > 1.5) { return all(v == vec3<f32>(v.x)) && !cloud_keeps(f, v.x); }
+    return f.x > 0.5 && (all(v < vec3<f32>(f.y)) || all(v > vec3<f32>(f.z)));
+}
+
+/// Whether a filter leaves out the whole element.
+fn filtered_out(i: CIn) -> bool {
+    let has = u32(round(i.rgb.a * 255.0));
+    let values = array<vec3<f32>, 4>(i.f0, i.f1, i.f2, i.f3);
+    for (var k = 0u; k < 4u; k++) {
+        if (((has >> k) & 1u) != 0u && cloud_drops(cloud.filters[k], values[k])) { return true; }
+    }
+    return false;
+}
+
+/// The part in front of the near plane of the segment between clip-space `a` and `b`, as
+/// fractions of it from `a`; empty (first above second) when all of it is behind. Clip-space
+/// coordinates are affine along a line, so the crossing is exact.
+fn in_front(a: vec4<f32>, b: vec4<f32>) -> vec2<f32> {
+    let za = near_z(a);
+    let zb = near_z(b);
+    if (za < 0.0 && zb < 0.0) { return vec2<f32>(1.0, 0.0); }
+    let t = za / (za - zb);
+    return vec2<f32>(select(0.0, t, za < 0.0), select(1.0, t, zb < 0.0));
+}
+
+@vertex
+fn vs_cloud_segment(@builtin(vertex_index) vi: u32, i: CIn) -> COut {
+    // Corner `vi % 10` of the cross-section at the start (`vi < 10`) or the end; the index
+    // buffer joins them into the bead's sides.
+    let pa = u.vp * vec4<f32>(i.a, 1.0);
+    let pb = u.vp * vec4<f32>(i.b, 1.0);
+    let part = in_front(pa, pb);
+    if (filtered_out(i) || part.x > part.y) {
+        return cloud_out(i, vec3<f32>(1.0, 0.0, 0.0), i.a, vec4<f32>(0.0, 0.0, 0.0, -1.0), vec3<f32>(0.0));
+    }
+    // Where the near plane cuts it, the bead ends there, square; its numbers are exact at `e`.
+    let at_end = vi >= 10u;
+    let e = select(part.x, part.y, at_end);
+    let cut = e != select(0.0, 1.0, at_end);
+    let f = bead_frame(i.b - i.a);
+    let c = stadium(vi % 10u, i.size);
+    let axis = mix(i.a, i.b, e);
+    // Where it meets the next or the previous bead, the cross-section lies in the plane halfway
+    // between their directions, stretched across to keep its width: both beads end on the same
+    // section. A turn sharper than 120° ends square instead.
+    let other = select(i.a - i.before, i.after - i.b, at_end);
+    var across_dir = f[1];
+    var stretch = 1.0;
+    if (!cut && length(other) > 1e-9) {
+        let g = bead_frame(other);
+        let mid = f[1] + g[1];
+        if (length(mid) > 1e-6 && dot(normalize(mid), f[1]) > 0.5) {
+            across_dir = normalize(mid);
+            stretch = 1.0 / dot(across_dir, f[1]);
+        }
+    }
+    let wp = axis + across_dir * (c.x * stretch) + f[2] * c.y;
+    let ca = u.vp * vec4<f32>(axis, 1.0);
+    let cw = u.vp * vec4<f32>(wp, 1.0);
+    let half = u.screen.xy * 0.5;
+    var pos = cw;
+    // At least a pixel and a half across: a bead seen from afar, or a line without size. A corner
+    // behind the eye has no place on the screen and needs no widening: the rasteriser clips it.
+    if (cw.w > 0.0) {
+        let c0 = mix(pa, pb, part.x);
+        let c1 = mix(pa, pb, part.y);
+        let along = (c1.xy / c1.w - c0.xy / c0.w) * half;
+        var across = vec2<f32>(-along.y, along.x);
+        if (length(across) < 1e-6) { across = vec2<f32>(1.0, 0.0); }
+        across = normalize(across);
+        var px = (cw.xy / cw.w - ca.xy / ca.w) * half;
+        if (length(px) < MIN_HALF_PX * abs(c.z)) {
+            px = across * c.z * MIN_HALF_PX;
+            pos = vec4<f32>((ca.xy / ca.w + px / half) * cw.w, cw.z, cw.w);
+        }
+    }
+    let n = select(f[1] * c.z + f[2] * c.w, vec3<f32>(0.0), i.size.y <= 0.0);
+    return cloud_out(i, vec3<f32>(1.0 - e, e, 0.0), wp, pos, n);
+}
+
+@vertex
+fn vs_cloud_triangle(@builtin(vertex_index) vi: u32, i: CIn) -> COut {
+    // Not `w[vi] = 1.0`: the Windows D3D12 shader compiler cannot write through a dynamic vector index.
+    let w = vec3<f32>(f32(vi == 0u), f32(vi == 1u), f32(vi == 2u));
+    let wp = i.a * w.x + i.b * w.y + i.c * w.z;
+    var n = cross(i.b - i.a, i.c - i.a);
+    if (length(n) > 0.0) { n = normalize(n); }
+    // The true clip-space corner, even behind the eye: the rasteriser clips a triangle exactly.
+    return cloud_out(i, w, wp, u.vp * vec4<f32>(wp, 1.0), n);
+}
+
 fn cloud_ramp(t: f32) -> vec3<f32> {
    var stops = array<vec3<f32>, 5>(
        vec3<f32>(40.0, 70.0, 200.0), vec3<f32>(30.0, 170.0, 230.0), vec3<f32>(60.0, 200.0, 90.0),
@@ -965,5 +1114,8 @@ fn fs_cloud(o: COut) -> @location(0) vec4<f32> {
    } else if ((o.has & 16u) != 0u && mode > 0.5) {
        c = cloud_ramp((o.v - cloud.style.z) / max(cloud.style.w - cloud.style.z, 1e-12));
    }
+    if (length(o.n) > 0.5) {
+        c = c * (0.45 + 0.55 * abs(dot(normalize(o.n), normalize(u.back.xyz))));
+    }
    return out_color(vec4<f32>(c, 1.0));
 }
@@ -0,0 +1,667 @@
+{
+  "order": 260,
+  "provenance": "Original SolidCraft stone-grey palette and semantic icon-role mapping",
+  "format": "solidcraft-theme/1",
+  "name": "Onyx",
+  "base": "dark",
+  "colors": {
+    "accent": "#9eafbd",
+    "accent_soft": "#3b4852",
+    "agent_busy": "#9eafbd",
+    "agent_ok": "#a5b9a5",
+    "app_bar": "#1c1e20",
+    "app_bar_hover": "#dededc16",
+    "app_bar_hover_button": "#dededc1c",
+    "app_bar_hover_strong": "#dededc28",
+    "app_bar_hover_subtle": "#dededc0c",
+    "app_bar_separator": "#383c3f",
+    "app_bar_tab_active": "#303235",
+    "app_bar_text": "#dededc",
+    "axis_x": "#d7938f",
+    "axis_y": "#a5b9a5",
+    "axis_z": "#98b2c8",
+    "bend_down": "#b8a7c3",
+    "bend_up": "#a5b9a5",
+    "body": "#93989c",
+    "body_edge": "#60666b",
+    "body_selected": "#3b4852",
+    "border": "#3d4145",
+    "box_window": "#9eafbd",
+    "chip": "#758b9b",
+    "construction_geom": "#b9a78e",
+    "construction_plane": "#b9a78e24",
+    "continuity": [
+      "#a5b9a5",
+      "#98b2c8",
+      "#c7b28b",
+      "#b8a7c3"
+    ],
+    "control_border": "#4a4f54",
+    "control_fill": "#303235",
+    "cube_border": "#50565b",
+    "cube_face": "#34373a",
+    "cube_hover": "#53616c",
+    "cube_text": "#dededc",
+    "dialog_bg": "#2b2d2f",
+    "dialog_body": "#2b2d2f",
+    "dialog_border": "#3d4145",
+    "dialog_footer": "#27292b",
+    "dialog_label": "#dededc",
+    "dialog_rule": "#383c3f",
+    "dimension": "#c7b28b",
+    "dimension_driven": "#a59474",
+    "error": "#d7938f",
+    "field": "#1c1e20",
+    "form_accent": "#9d8faa",
+    "form_dim": "#c6c8c9",
+    "form_error": "#d7938f",
+    "form_error_fill": "#493334",
+    "form_fill": "#b9abc5",
+    "form_ink": "#dededc",
+    "form_primary": "#9eafbd",
+    "form_primary_fill": "#9eafbd",
+    "form_soft": "#343039",
+    "form_success": "#a5b9a5",
+    "form_success_fill": "#344139",
+    "form_tab_ink": "#b9abc5",
+    "glyph_bg": "#34373a",
+    "glyph_edge": "#d7938f",
+    "glyph_text": "#d7938f",
+    "grid": "#252729",
+    "grid_major": "#2e3235",
+    "hover": "#3b4852",
+    "hover_edge": "#b1c1ce",
+    "hover_edge_halo": "#181a1c",
+    "hover_profile": "#9eafbd30",
+    "hover_profile_edge": "#b1c1ce",
+    "icon": "#dededc",
+    "icons.agent": "#b8a7c3",
+    "icons.highlight": "#dededc",
+    "icons.marker_halo": "#1c1e20cc",
+    "interference": "#d7938f",
+    "joint_axis": "#98b2c8",
+    "joint_manipulator": "#9eafbd",
+    "logo": [
+      "#c9d4dc",
+      "#9eafbd",
+      "#647986"
+    ],
+    "manipulator": "#9eafbd",
+    "mesh_accent": "#a29772",
+    "mesh_fill": "#beb48d",
+    "mesh_ink": "#beb48d",
+    "mesh_soft": "#34332b",
+    "nav_dim": "#b5b7b8",
+    "nav_field": "#1c1e20",
+    "nav_hover": "#43494f",
+    "nav_press": "#59636c",
+    "nav_tip": "#2b2d2f",
+    "nav_tip_ink": "#dededc",
+    "nav_tip_key_border": "#3b3e41",
+    "nav_viewport": "#27292b",
+    "on_accent": "#17191b",
+    "origin_plane": "#b9a78e2c",
+    "origin_plane_edge": "#b9a78e94",
+    "origin_plane_hover": "#9eafbd60",
+    "origin_point": "#b5b7b8",
+    "overlay": "#2b2d2f",
+    "panel": "#2b2d2f",
+    "panel_header": "#303235",
+    "preview_add": "#9eafbd",
+    "preview_cut": "#d7938f68",
+    "preview_new": "#c7b28b",
+    "preview_sketch": "#a5b9a5",
+    "profile_fill": "#9eafbd28",
+    "render_accent": "#a88e88",
+    "render_fill": "#c1a49e",
+    "render_ink": "#c1a49e",
+    "render_soft": "#38302f",
+    "rubber_band": "#9eafbd",
+    "section_cap": "#c7b28b",
+    "sel_edge": "#b1c1ce",
+    "sel_edge_rim": "#d0d9df",
+    "sel_face": "#3b4852",
+    "sel_profile": "#3b4852",
+    "sel_profile_edge": "#b1c1ce",
+    "sel_vertex": "#9eafbd",
+    "selected_bg": "#3b4852",
+    "selected_ink": "#dededc",
+    "sheet_fill": "#9eb9bd",
+    "sheet_ink": "#9eb9bd",
+    "sheet_soft": "#29363a",
+    "sketch": "#9eafbd",
+    "sketch_accent": "#b2b995",
+    "sketch_centerline": "#b5b7b8",
+    "sketch_conflict": "#d7938f",
+    "sketch_construction": "#b5b7b8",
+    "sketch_fixed": "#dededc",
+    "sketch_halo": "#181a1c",
+    "sketch_ink": "#b2b995",
+    "sketch_locked": "#a5b9a5",
+    "sketch_lost": "#d7938f",
+    "sketch_point": "#dededc",
+    "sketch_point_free": "#9eafbd",
+    "sketch_projected": "#b8a7c3",
+    "sketch_soft": "#32352c",
+    "surface_accent": "#a6947d",
+    "surface_fill": "#c0ae96",
+    "surface_ink": "#c0ae96",
+    "surface_soft": "#35322e",
+    "tab_on_fill_dark": "#17191b",
+    "text": "#dededc",
+    "text_dim": "#c6c8c9",
+    "timeline": "#2b2d2f",
+    "timeline_item": "#303235",
+    "timeline_item_error": "#493334",
+    "timeline_marker": "#b5b7b8",
+    "toolbar": "#2b2d2f",
+    "viewport_bottom": "#1b1d1f",
+    "viewport_top": "#222426",
+    "warning": "#c7b28b"
+  },
+  "radii": {
+    "radius_sm": 3,
+    "radius_md": 6,
+    "radius_lg": 8,
+    "radius_xl": 10,
+    "control_radius": 4,
+    "sketch_mode_radius": 6
+  },
+  "icon_palette": {
+    "ink": "#1b1d1f",
+    "line": "#d7d9d8",
+    "passive-1": "#b9bdc0",
+    "passive-2": "#8d9398",
+    "passive-3": "#646c72",
+    "guide": "#a2a8ac",
+    "solid": [
+      "#c9d4dc",
+      "#b2c1cc",
+      "#9eafbd"
+    ],
+    "surface": [
+      "#d6cab8",
+      "#c0ae96",
+      "#a6947d"
+    ],
+    "mesh": [
+      "#d4ccad",
+      "#beb48d",
+      "#a29772"
+    ],
+    "form": [
+      "#d0c5d9",
+      "#b9abc5",
+      "#9d8faa"
+    ],
+    "sketch": [
+      "#c9cfb3",
+      "#b2b995",
+      "#979f78"
+    ],
+    "constraint": [
+      "#e1b7b2",
+      "#d7938f",
+      "#b77875"
+    ],
+    "construction": [
+      "#d2c6b4",
+      "#b9a78e",
+      "#9f8c73"
+    ]
+  },
+  "options": [
+    {
+      "id": "opacity",
+      "type": "range",
+      "default": 80,
+      "min": 60,
+      "max": 100
+    },
+    {
+      "id": "blur",
+      "type": "range",
+      "default": 60,
+      "max": 60
+    },
+    {
+      "id": "tab_colours",
+      "type": "bool",
+      "default": false
+    },
+    {
+      "id": "tab_fade_ms",
+      "type": "range",
+      "default": 240
+    },
+    {
+      "id": "accent",
+      "type": "choice",
+      "default": "slate",
+      "label": {
+        "en": "Accent",
+        "de": "Akzent",
+        "ja": "アクセント",
+        "ko": "강조색",
+        "zh": "强调色"
+      },
+      "help": {
+        "en": "Selection, highlights and Model controls; workspace and status colours keep their meaning.",
+        "de": "Auswahl, Hervorhebungen und Modell-Steuerung; Arbeitsbereichs- und Statusfarben behalten ihre Bedeutung.",
+        "ja": "選択・強調・モデルの操作色。ワークスペースや状態の色の意味は変えません。",
+        "ko": "선택, 강조 및 모델 조작의 색상입니다. 작업 공간과 상태 색상의 의미는 유지됩니다.",
+        "zh": "更改选择、高亮与模型控件的色调；工作空间和状态色保持原有含义。"
+      },
+      "values": [
+        {
+          "id": "slate",
+          "label": {
+            "en": "Slate blue",
+            "de": "Schieferblau",
+            "ja": "石板の青",
+            "ko": "슬레이트 블루",
+            "zh": "岩蓝"
+          }
+        },
+        {
+          "id": "silver",
+          "label": {
+            "en": "Silver",
+            "de": "Silber",
+            "ja": "シルバー",
+            "ko": "은색",
+            "zh": "银灰"
+          }
+        },
+        {
+          "id": "sage",
+          "label": {
+            "en": "Sage",
+            "de": "Salbei",
+            "ja": "セージ",
+            "ko": "세이지",
+            "zh": "鼠尾草绿"
+          }
+        }
+      ]
+    },
+    {
+      "id": "contrast",
+      "type": "choice",
+      "default": "soft",
+      "label": {
+        "en": "Contrast",
+        "de": "Kontrast",
+        "ja": "コントラスト",
+        "ko": "대비",
+        "zh": "对比度"
+      },
+      "help": {
+        "en": "Soft stone layers or stronger separation between panels and fields.",
+        "de": "Weiche Steinschichten oder stärkere Trennung von Flächen und Feldern.",
+        "ja": "柔らかな石の階調か、パネルと入力欄を明確に分ける階調を選びます。",
+        "ko": "부드러운 석재 톤 또는 패널과 입력란을 더 뚜렷하게 구분합니다.",
+        "zh": "选择柔和的石色层次，或增强面板与输入框的区分。"
+      },
+      "values": [
+        {
+          "id": "soft",
+          "label": {
+            "en": "Soft",
+            "de": "Weich",
+            "ja": "ソフト",
+            "ko": "부드럽게",
+            "zh": "柔和"
+          }
+        },
+        {
+          "id": "defined",
+          "label": {
+            "en": "Defined",
+            "de": "Deutlich",
+            "ja": "くっきり",
+            "ko": "뚜렷하게",
+            "zh": "分明"
+          }
+        }
+      ]
+    },
+    {
+      "id": "brightness",
+      "type": "range",
+      "effect": "surface_brightness",
+      "default": 100,
+      "min": 60,
+      "max": 120,
+      "step": 1,
+      "unit": "%",
+      "label": {
+        "en": "Brightness",
+        "de": "Helligkeit",
+        "ja": "明るさ",
+        "ko": "밝기",
+        "zh": "亮度"
+      },
+      "help": {
+        "en": "Adjust stone surfaces, viewport backgrounds and grid brightness. 100% keeps the authored tones; text and semantic colours stay unchanged.",
+        "de": "Helligkeit von Steinflächen, Ansichtsflächen und Raster. 100% erhält die ursprünglichen Töne; Text und Bedeutungsfarben bleiben unverändert.",
+        "ja": "石調の面・ビューポート背景・グリッドの明るさを調整します。100%は元の階調です。文字と意味のある色は変えません。",
+        "ko": "석재 표면·뷰포트 배경·격자의 밝기를 조절합니다. 100%는 원래 톤을 유지하며 글자와 의미 색상은 바꾸지 않습니다.",
+        "zh": "调整石色表面、视口背景和网格的亮度。100%保留原有色调；文字和语义颜色保持不变。"
+      }
+    },
+    {
+      "id": "foreground_colours",
+      "type": "choice",
+      "default": "vibrant",
+      "label": {
+        "en": "Foreground colours",
+        "de": "Vordergrundfarben",
+        "ja": "前景の色",
+        "ko": "전경 색상",
+        "zh": "前景颜色"
+      },
+      "help": {
+        "en": "Vibrant strengthens axes, icons and guides. Muted keeps the original quiet palette. Accent controls selection.",
+        "de": "Leuchtend verstärkt Achsen, Symbole und Hilfen. Gedämpft behält die ruhige ursprüngliche Palette. Akzent steuert die Auswahl.",
+        "ja": "鮮やかは軸・アイコン・作図ガイドを強調します。落ち着いた配色は元の控えめな色を保ちます。選択の色はアクセントで設定します。",
+        "ko": "선명함은 축·아이콘·가이드를 강조합니다. 차분함은 기존의 은은한 팔레트를 유지합니다. 선택 색상은 강조색 설정을 따릅니다.",
+        "zh": "鲜艳增强轴、图标和辅助线的色彩。柔和保留原有的沉静配色。选择颜色仍由强调色控制。"
+      },
+      "values": [
+        {
+          "id": "muted",
+          "label": {
+            "en": "Muted",
+            "de": "Gedämpft",
+            "ja": "落ち着いた",
+            "ko": "차분함",
+            "zh": "柔和"
+          }
+        },
+        {
+          "id": "vibrant",
+          "label": {
+            "en": "Vibrant",
+            "de": "Leuchtend",
+            "ja": "鮮やか",
+            "ko": "선명함",
+            "zh": "鲜艳"
+          }
+        }
+      ]
+    }
+  ],
+  "overlays": [
+    {
+      "when": {
+        "opt": "contrast",
+        "eq": "defined"
+      },
+      "colors": {
+        "app_bar": "#151719",
+        "panel": "#25282a",
+        "dialog_bg": "#25282a",
+        "dialog_body": "#25282a",
+        "dialog_footer": "#202325",
+        "panel_header": "#373b3e",
+        "field": "#171a1c",
+        "control_fill": "#383d41",
+        "border": "#4e555b",
+        "dialog_border": "#4e555b",
+        "dialog_rule": "#444b51",
+        "control_border": "#626c73",
+        "text": "#eeeeec",
+        "text_dim": "#ced1d2",
+        "form_ink": "#eeeeec",
+        "form_dim": "#ced1d2",
+        "dialog_label": "#eeeeec",
+        "toolbar": "#25282a",
+        "timeline": "#25282a"
+      }
+    },
+    {
+      "when": {
+        "opt": "accent",
+        "eq": "silver"
+      },
+      "colors": {
+        "accent": "#b7bdc2",
+        "manipulator": "#b7bdc2",
+        "joint_manipulator": "#b7bdc2",
+        "preview_add": "#b7bdc2",
+        "rubber_band": "#b7bdc2",
+        "box_window": "#b7bdc2",
+        "form_primary": "#b7bdc2",
+        "form_primary_fill": "#b7bdc2",
+        "sketch": "#b7bdc2",
+        "sketch_point_free": "#b7bdc2",
+        "sel_vertex": "#b7bdc2",
+        "accent_soft": "#454b50",
+        "hover": "#454b50",
+        "selected_bg": "#454b50",
+        "sel_face": "#454b50",
+        "sel_profile": "#454b50",
+        "body_selected": "#454b50",
+        "sel_edge": "#d5dadf",
+        "sel_profile_edge": "#d5dadf",
+        "hover_edge": "#d5dadf",
+        "hover_profile_edge": "#d5dadf",
+        "sel_edge_rim": "#dde0e3",
+        "hover_profile": "#b7bdc230",
+        "origin_plane_hover": "#b7bdc260",
+        "profile_fill": "#b7bdc228",
+        "cube_hover": "#454b50",
+        "chip": "#b7bdc2",
+        "logo": [
+          "#dde0e3",
+          "#c9cfd4",
+          "#b7bdc2"
+        ]
+      },
+      "icon_palette": {
+        "solid": [
+          "#dde0e3",
+          "#c9cfd4",
+          "#b7bdc2"
+        ]
+      }
+    },
+    {
+      "when": {
+        "opt": "accent",
+        "eq": "sage"
+      },
+      "colors": {
+        "accent": "#aabcae",
+        "manipulator": "#aabcae",
+        "joint_manipulator": "#aabcae",
+        "preview_add": "#aabcae",
+        "rubber_band": "#aabcae",
+        "box_window": "#aabcae",
+        "form_primary": "#aabcae",
+        "form_primary_fill": "#aabcae",
+        "sketch": "#aabcae",
+        "sketch_point_free": "#aabcae",
+        "sel_vertex": "#aabcae",
+        "accent_soft": "#414d45",
+        "hover": "#414d45",
+        "selected_bg": "#414d45",
+        "sel_face": "#414d45",
+        "sel_profile": "#414d45",
+        "body_selected": "#414d45",
+        "sel_edge": "#c2d2c5",
+        "sel_profile_edge": "#c2d2c5",
+        "hover_edge": "#c2d2c5",
+        "hover_profile_edge": "#c2d2c5",
+        "sel_edge_rim": "#d1ddd4",
+        "hover_profile": "#aabcae30",
+        "origin_plane_hover": "#aabcae60",
+        "profile_fill": "#aabcae28",
+        "cube_hover": "#414d45",
+        "chip": "#aabcae",
+        "logo": [
+          "#d1ddd4",
+          "#becec2",
+          "#aabcae"
+        ]
+      },
+      "icon_palette": {
+        "solid": [
+          "#d1ddd4",
+          "#becec2",
+          "#aabcae"
+        ]
+      }
+    },
+    {
+      "when": {
+        "opt": "foreground_colours",
+        "eq": "vibrant"
+      },
+      "colors": {
+        "axis_x": "#ff6d79",
+        "axis_y": "#4fd681",
+        "axis_z": "#4da7ff",
+        "agent_busy": "#4da7ff",
+        "agent_ok": "#4fd681",
+        "warning": "#ffd166",
+        "error": "#ff6d79",
+        "form_error": "#ff6d79",
+        "form_success": "#4fd681",
+        "glyph_edge": "#ff6d79",
+        "glyph_text": "#ff6d79",
+        "interference": "#ff6d79",
+        "sketch_conflict": "#ff6d79",
+        "sketch_lost": "#ff6d79",
+        "sketch_locked": "#4fd681",
+        "sketch_projected": "#c78bff",
+        "dimension": "#ffd166",
+        "dimension_driven": "#ffb166",
+        "construction_geom": "#ffb166",
+        "sketch_centerline": "#b5b7b8",
+        "sketch_construction": "#b5b7b8",
+        "joint_axis": "#42d9dd",
+        "bend_down": "#c78bff",
+        "bend_up": "#4fd681",
+        "preview_cut": "#ff6d7968",
+        "preview_new": "#ffd166",
+        "preview_sketch": "#4fd681",
+        "section_cap": "#ffd166",
+        "sketch_accent": "#4fd681",
+        "sketch_ink": "#4fd681",
+        "surface_accent": "#ffb166",
+        "surface_fill": "#ffb166",
+        "surface_ink": "#ffb166",
+        "mesh_accent": "#ffd166",
+        "mesh_fill": "#ffd166",
+        "mesh_ink": "#ffd166",
+        "form_accent": "#c78bff",
+        "form_fill": "#c78bff",
+        "form_tab_ink": "#c78bff",
+        "sheet_fill": "#63cbd5",
+        "sheet_ink": "#63cbd5",
+        "render_accent": "#ff6d79",
+        "render_fill": "#ff6d79",
+        "render_ink": "#ff6d79",
+        "icons.agent": "#c78bff",
+        "continuity": [
+          "#4fd681",
+          "#4da7ff",
+          "#ffd166",
+          "#c78bff"
+        ],
+        "origin_plane_edge": "#ffb16694",
+        "sheet_soft": "#283a3e"
+      },
+      "icon_palette": {
+        "ink": "#1b1d1f",
+        "line": "#d7d9d8",
+        "passive-1": "#d3d8dc",
+        "passive-2": "#b2bbc2",
+        "passive-3": "#929fa9",
+        "guide": "#b4c8d6",
+        "solid": [
+          "#82c1ff",
+          "#62b2ff",
+          "#4da7ff"
+        ],
+        "surface": [
+          "#ffc894",
+          "#ffba78",
+          "#ffb166"
+        ],
+        "mesh": [
+          "#ffdf94",
+          "#ffd778",
+          "#ffd166"
+        ],
+        "form": [
+          "#d8aeff",
+          "#ce99ff",
+          "#c78bff"
+        ],
+        "sketch": [
+          "#84e2a7",
+          "#64db90",
+          "#4fd681"
+        ],
+        "constraint": [
+          "#ff99a1",
+          "#ff7f89",
+          "#ff6d79"
+        ],
+        "construction": [
+          "#ffc894",
+          "#ffba78",
+          "#ffb166"
+        ]
+      }
+    }
+  ],
+  "tabs": {
+    "MODEL": {
+      "viewport_top": "#24292d",
+      "viewport_bottom": "#1b2023",
+      "panel": "#303438"
+    },
+    "SURFACE": {
+      "viewport_top": "#292622",
+      "viewport_bottom": "#211e1b",
+      "panel": "#36332f"
+    },
+    "MESH": {
+      "viewport_top": "#282820",
+      "viewport_bottom": "#202019",
+      "panel": "#35352e"
+    },
+    "FORM": {
+      "viewport_top": "#26232b",
+      "viewport_bottom": "#1e1b22",
+      "panel": "#343137"
+    },
+    "SHEET METAL": {
+      "viewport_top": "#22282a",
+      "viewport_bottom": "#1b2022",
+      "panel": "#303638"
+    },
+    "RENDER": {
+      "viewport_top": "#2b2423",
+      "viewport_bottom": "#221c1b",
+      "panel": "#373130"
+    },
+    "SKETCH": {
+      "viewport_top": "#252921",
+      "viewport_bottom": "#1d211a",
+      "panel": "#33362f"
+    }
+  },
+  "borders": {
+    "primary_inset": {
+      "width": 0.5,
+      "gap": 1,
+      "color": "#dce2e70e"
+    }
+  },
+  "requires": 2
+}
@@ -2,6 +2,46 @@
 use crate::{DocError, Document, Mat, ModelBody, ModelState, Result};
 use std::collections::BTreeSet;

+/// A profile moved into the component receiving its own body is read through the recorded
+/// transfer frame. Reading its live placement would move the source geometry when that
+/// component moves, then move the transferred body a second time. All outputs of a constructor
+/// must reach the sketch's component through the same frame; independent cross-component
+/// references retain their ordinary live placement.
+pub(crate) fn profile_frame(doc: &Document, feature: &crate::Feature, sketch: u64) -> Option<Mat> {
+    if !matches!(
+        feature.kind,
+        crate::FeatureKind::Extrude { operation: crate::Operation::NewBody, .. }
+            | crate::FeatureKind::Revolve { operation: crate::Operation::NewBody, .. }
+    ) || feature.body_names.is_empty()
+    {
+        return None;
+    }
+    let owner = doc.feature(sketch)?.component;
+    if owner == feature.component {
+        return None;
+    }
+    let mut frames: std::collections::BTreeMap<&str, (u64, Mat)> =
+        feature.body_names.iter().map(|name| (name.as_str(), (feature.component, crate::IDENTITY))).collect();
+    let start = doc.feature_index(feature.id)?.saturating_add(1);
+    for step in doc.features.iter().take(doc.marker.unwrap_or(usize::MAX)).skip(start).filter(|step| !step.suppressed) {
+        let crate::FeatureKind::BodyTransfer { bodies, from, to, transform } = &step.kind else { continue };
+        for name in bodies {
+            if let Some((component, frame)) = frames.get_mut(name.as_ref()) {
+                if *component != *from || !valid_transfer_matrix(transform) {
+                    return None;
+                }
+                *component = *to;
+                *frame = crate::mat_mul(transform, frame);
+            }
+        }
+        if frames.values().all(|(component, _)| *component == owner) {
+            let (_, first) = frames.values().next()?;
+            return frames.values().all(|(_, frame)| frame == first).then(|| crate::mat_inverse(first)).flatten();
+        }
+    }
+    None
+}
+
 pub fn valid_transfer_matrix(m: &Mat) -> bool {
    crate::is_placement(m)
 }
@@ -89,20 +89,45 @@ pub fn format_value(value: f64, kind: expr::Kind, unit: &str, decimals: u8, f: &
    if unit_kind != kind {
        return Err(DocError::Invalid("number display unit has a different kind".into()));
    }
-    format_display(value / scale, scale, decimals, f)
+    format_display(value / scale, scale, decimals, f, None)
 }

 /// Format a unit-less number with the same validation and decimal rounding policy.
 pub fn format_number(x: f64, decimals: u8, f: &NumberFormat) -> Result<Shown> {
-    format_display(x, 1.0, decimals, f)
+    format_display(x, 1.0, decimals, f, None)
 }

-fn format_display(x: f64, scale: f64, decimals: u8, f: &NumberFormat) -> Result<Shown> {
+/// Format an internal value with a rounding step in the selected display unit.
+/// The step is a shortest round-trip decimal, finite, positive and at most 1e6.
+/// Input decimal preparation precedes step rounding; requested decimal precision follows it.
+/// Both rounding operations use `f.ties`. The original value is never changed.
+/// The exact snapped display magnitude must be at most 1e12. An out-of-range snap
+/// returns [`DocError::Invalid`] before final decimal-place rounding, even if that
+/// final rounding would bring the displayed value back into range.
+pub fn format_value_with_step(value: f64, kind: expr::Kind, unit: &str, decimals: u8, step: f64, f: &NumberFormat) -> Result<Shown> {
+    let (unit_kind, scale) = expr::unit_info(unit).ok_or_else(|| DocError::Invalid("unknown number display unit".into()))?;
+    if unit_kind != kind {
+        return Err(DocError::Invalid("number display unit has a different kind".into()));
+    }
+    format_display(value / scale, scale, decimals, f, Some(step))
+}
+
+/// Format a unit-less number with the step policy of [`format_value_with_step`].
+/// Decimal precision can round a step multiple again; `Shown.value` always matches the text.
+/// Out-of-range snapped magnitudes are rejected before final decimal-place rounding.
+pub fn format_number_with_step(x: f64, decimals: u8, step: f64, f: &NumberFormat) -> Result<Shown> {
+    format_display(x, 1.0, decimals, f, Some(step))
+}
+
+fn format_display(x: f64, scale: f64, decimals: u8, f: &NumberFormat, step: Option<f64>) -> Result<Shown> {
    // The unit table supplies a positive finite scale. Its decimal step must be at most
    // 1e-9 internal units; the precision floor can make the effective tie window narrower.
    let unit_resolution = (scale.log10() + 9.0).ceil().max(0.0) as usize;
    let resolution = unit_resolution.max(usize::from(decimals) + 3);
-    let (rounded, value) = round_decimal(x, decimals, resolution, f.ties)?;
+    let (rounded, value) = match step {
+        Some(step) => round_decimal_step(x, step, decimals, resolution, f.ties)?,
+        None => round_decimal(x, decimals, resolution, f.ties)?,
+    };
    let (integer, fraction) = rounded.split_once('.').unwrap_or((&rounded, ""));
    let fraction = if f.trailing_zeros { fraction } else { fraction.trim_end_matches('0') };
    let integer = if !f.leading_zero && integer == "0" && !fraction.is_empty() { "" } else { integer };
@@ -121,16 +146,25 @@ fn format_display(x: f64, scale: f64, decimals: u8, f: &NumberFormat) -> Result<
    Ok(Shown { text, value })
 }

-/// Prepare a bounded magnitude, then round decimal digits, never a binary tie comparison.
-fn round_decimal(x: f64, decimals: u8, resolution: usize, ties: Ties) -> Result<(String, f64)> {
+/// Validate and prepare the magnitude once, identically for both rounding paths.
+fn prepare_decimal(x: f64, decimals: u8, resolution: usize) -> Result<String> {
    if decimals > 8 {
        return Err(DocError::Invalid("number precision must be at most 8 decimal places".into()));
    }
    if !x.is_finite() || x.abs() > 1e12 {
        return Err(DocError::Invalid("display value must be finite with magnitude at most 1e12".into()));
    }
-    let prepared = format!("{:.*}", resolution, x.abs());
-    let (integer, fraction) = prepared.split_once('.').unwrap_or((&prepared, ""));
+    Ok(format!("{:.*}", resolution, x.abs()))
+}
+
+/// Prepare a bounded magnitude, then round decimal digits, never a binary tie comparison.
+fn round_decimal(x: f64, decimals: u8, resolution: usize, ties: Ties) -> Result<(String, f64)> {
+    let prepared = prepare_decimal(x, decimals, resolution)?;
+    round_prepared(&prepared, x.is_sign_negative(), decimals, ties)
+}
+
+fn round_prepared(prepared: &str, negative: bool, decimals: u8, ties: Ties) -> Result<(String, f64)> {
+    let (integer, fraction) = prepared.split_once('.').unwrap_or((prepared, ""));
    let places = usize::from(decimals);
    let mut digits: Vec<u8> = integer.bytes().chain(fraction.bytes().take(places)).collect();
    let discarded = fraction.as_bytes().get(places..).unwrap_or_default();
@@ -166,10 +200,81 @@ fn round_decimal(x: f64, decimals: u8, resolution: usize, ties: Ties) -> Result<
    }
    let rounded = String::from_utf8(digits).map_err(|_| DocError::Invalid("invalid prepared digits".into()))?;
    let magnitude = rounded.parse::<f64>().map_err(|_| DocError::Invalid("invalid rounded number".into()))?;
-    let negative = x.is_sign_negative() && magnitude != 0.0;
+    let negative = negative && magnitude != 0.0;
    Ok((rounded, if negative { -magnitude } else { magnitude }))
 }

+/// Divide decimal digits by a small decimal coefficient, retaining the full quotient.
+/// A shortest f64 coefficient has at most 17 significant digits. With the unit table's
+/// resolution <= 15, a scaled divisor is <= 1e21, so remainder * 10 fits u128.
+/// At most 324 appended zeros are needed, even for the smallest positive subnormal.
+fn round_decimal_step(x: f64, step: f64, decimals: u8, resolution: usize, ties: Ties) -> Result<(String, f64)> {
+    if !step.is_finite() || step <= 0.0 || step > 1e6 {
+        return Err(DocError::Invalid("number rounding step must be finite, positive and at most 1e6".into()));
+    }
+    let prepared = prepare_decimal(x, decimals, resolution)?;
+    let scientific = format!("{step:e}");
+    let (mantissa, exponent) = scientific.split_once('e').ok_or_else(|| DocError::Invalid("invalid decimal step".into()))?;
+    let fraction = mantissa.split_once('.').map_or(0, |(_, f)| f.len());
+    let coefficient = mantissa.replace('.', "").parse::<u128>().map_err(|_| DocError::Invalid("invalid step coefficient".into()))?;
+    let exponent = exponent.parse::<i32>().map_err(|_| DocError::Invalid("invalid step exponent".into()))? - fraction as i32;
+    let shift = exponent + resolution as i32;
+    let divisor = if shift > 0 { 10_u128.checked_pow(shift as u32).and_then(|n| coefficient.checked_mul(n)) } else { Some(coefficient) }
+        .ok_or_else(|| DocError::Invalid("rounding step scale overflow".into()))?;
+    let mut remainder = 0_u128;
+    let mut quotient = Vec::new();
+    for digit in prepared.bytes().filter(|d| *d != b'.').chain(std::iter::repeat_n(b'0', (-shift).max(0) as usize)) {
+        remainder = remainder * 10 + u128::from(digit - b'0');
+        quotient.push((remainder / divisor) as u8);
+        remainder %= divisor;
+    }
+    let up = remainder * 2 > divisor
+        || (remainder * 2 == divisor && (ties == Ties::HalfAwayFromZero || quotient.last().is_some_and(|d| !d.is_multiple_of(2))));
+    // Exact quotient * coefficient, with the rounding increment folded into the carry.
+    let mut carry = if up { coefficient } else { 0 };
+    let mut product = Vec::new();
+    for digit in quotient.iter().rev() {
+        let n = u128::from(*digit) * coefficient + carry;
+        product.push(b'0' + (n % 10) as u8);
+        carry = n / 10;
+    }
+    while carry > 0 {
+        product.push(b'0' + (carry % 10) as u8);
+        carry /= 10;
+    }
+    product.reverse();
+    let product = String::from_utf8(product).map_err(|_| DocError::Invalid("invalid step digits".into()))?;
+    let mut magnitude = product.trim_start_matches('0').to_string();
+    if magnitude.is_empty() {
+        magnitude.push('0');
+    }
+    if exponent >= 0 {
+        if magnitude != "0" {
+            magnitude.extend(std::iter::repeat_n('0', exponent as usize));
+        }
+    } else {
+        let places = (-exponent) as usize;
+        if magnitude.len() <= places {
+            magnitude = format!("{}{}", "0".repeat(places + 1 - magnitude.len()), magnitude);
+        }
+        magnitude.insert(magnitude.len() - places, '.');
+    }
+    let (integer, fraction) = magnitude.split_once('.').unwrap_or((&magnitude, ""));
+    let whole = integer.parse::<u64>().map_err(|_| DocError::Invalid("rounded display magnitude overflow".into()))?;
+    if whole > 1_000_000_000_000 || (whole == 1_000_000_000_000 && fraction.bytes().any(|d| d != b'0')) {
+        return Err(DocError::Invalid("rounded display magnitude must be at most 1e12".into()));
+    }
+    // round_prepared needs at least the requested fraction digits, including for integer steps.
+    let missing = usize::from(decimals).saturating_sub(fraction.len());
+    if missing > 0 {
+        if !magnitude.contains('.') {
+            magnitude.push('.');
+        }
+        magnitude.extend(std::iter::repeat_n('0', missing));
+    }
+    round_prepared(&magnitude, x.is_sign_negative(), decimals, ties)
+}
+
 fn grouped_digits(text: &mut String, digits: &str, integer: bool, groups: bool) {
    for (i, digit) in digits.chars().enumerate() {
        if groups && digits.len() >= 5 && i > 0 && if integer { (digits.len() - i).is_multiple_of(3) } else { i.is_multiple_of(3) } {
@@ -471,6 +576,214 @@ mod number_tests {
        }
    }

+    #[test]
+    fn step_ties_and_decimal_fractions() {
+        for (x, step, dp, even, away) in [
+            (1.25, 0.5, 1, "1.0", "1.5"),
+            (1.75, 0.5, 1, "2.0", "2.0"),
+            (12.5, 5.0, 0, "10", "15"),
+            (25.0, 10.0, 0, "20", "30"),
+            (0.125, 0.05, 2, "0.10", "0.15"),
+            (0.375, 0.25, 2, "0.50", "0.50"),
+            (0.15, 0.1, 1, "0.2", "0.2"),
+            (0.25, 0.1, 1, "0.2", "0.3"),
+            (1.25, 0.5, 0, "1", "2"),
+        ] {
+            for (ties, expected) in [(Ties::HalfEven, even), (Ties::HalfAwayFromZero, away)] {
+                let f = NumberFormat { ties, ..NumberFormat::default() };
+                for sign in [1.0, -1.0] {
+                    let shown = format_number_with_step(sign * x, dp, step, &f).unwrap();
+                    assert_eq!(shown.text, if sign < 0.0 { format!("−{expected}") } else { expected.into() });
+                    assert_eq!(shown.value, sign * expected.parse::<f64>().unwrap());
+                }
+            }
+        }
+    }
+
+    #[test]
+    fn step_prepares_display_before_division_and_keeps_boundary_neighbors() {
+        for ties in [Ties::HalfEven, Ties::HalfAwayFromZero] {
+            let f = NumberFormat { ties, ..NumberFormat::default() };
+            for x in [1.75_f64.next_down(), 1.75, 1.75_f64.next_up(), 1.7499999996] {
+                assert_eq!(format_number_with_step(x, 1, 0.5, &f).unwrap().text, "2.0");
+            }
+            for x in [1.25_f64.next_down(), 1.25, 1.25_f64.next_up()] {
+                let expected = if ties == Ties::HalfEven { "1.0" } else { "1.5" };
+                assert_eq!(format_number_with_step(x, 1, 0.5, &f).unwrap().text, expected);
+                assert_eq!(format_number_with_step(-x, 1, 0.5, &f).unwrap().text, format!("−{expected}"));
+            }
+            assert_eq!(format_number_with_step(1.7499999994, 1, 0.5, &f).unwrap().text, "1.5");
+            assert_eq!(format_number_with_step(1.7500000006, 1, 0.5, &f).unwrap().text, "2.0");
+        }
+        let f = NumberFormat::default();
+        // The precision floor narrows the preparation window at eight decimals.
+        assert_eq!(format_number_with_step(1.7499999996, 8, 0.5, &f).unwrap().text, "1.50000000");
+    }
+
+    #[test]
+    fn step_tiny_values_large_magnitudes_and_exact_final_digits() {
+        let f = NumberFormat::default();
+        for step in [f64::from_bits(1), f64::MIN_POSITIVE, 1e-200, 1e-20, 1e-8] {
+            for x in [0.0, -0.0, f64::from_bits(1), -1e11, 1e11, 34947628153.461784] {
+                let shown = format_number_with_step(x, 5, step, &f).unwrap();
+                assert!(shown.value.is_finite());
+                assert_eq!(shown.value, shown.text.replace('−', "-").parse::<f64>().unwrap());
+            }
+        }
+        assert_eq!(format_number_with_step(1e12, 8, f64::from_bits(1), &f).unwrap().text, "1000000000000.00000000");
+        assert_eq!(format_number_with_step(34947628153.461784, 5, 1e-8, &f).unwrap().text, "34947628153.46178");
+        // A tiny step can move an exact decimal tie by less than any f64 ULP.
+        // Keep those digits through the second rounding rather than parsing the snap to f64.
+        assert_eq!(format_number_with_step(1.25, 1, 3e-323, &f).unwrap().text, "1.3");
+        assert_eq!(format_number_with_step(-1.25, 1, 3e-323, &f).unwrap().text, "−1.3");
+        for step in [0.5, 10.0, 1e6] {
+            for x in [-0.0, -0.1] {
+                let shown = format_number_with_step(x, 2, step, &f).unwrap();
+                assert_eq!(shown.text, "0.00");
+                assert_eq!(shown.value.to_bits(), 0.0_f64.to_bits());
+            }
+        }
+    }
+
+    #[test]
+    fn step_extreme_coefficients_have_independent_expected_digits() {
+        // Shortest decimals: largest subnormal = 2225073858507201 * 10^-323,
+        // smallest normal = 22250738585072014 * 10^-324. For x=1.25, integer
+        // division leaves remainders 2221948386734081 and 354296156594724.
+        // Twice the first is above its divisor, twice the second below: the
+        // snap is just above/below 1.25, so final rounding gives 1.3/1.2 in BOTH modes.
+        // Other expected digits were calculated with independent rational arithmetic.
+        for (step, quarter) in [(f64::MIN_POSITIVE.next_down(), "1.3"), (f64::MIN_POSITIVE, "1.2")] {
+            for ties in [Ties::HalfEven, Ties::HalfAwayFromZero] {
+                let f = NumberFormat { ties, ..NumberFormat::default() };
+                for (x, dp, expected) in [
+                    (1.25, 1, quarter),
+                    (99999999999.75, 0, "100000000000"),
+                    (99999999999.75, 1, "99999999999.7"),
+                    (99999999999.75, 2, "99999999999.75"),
+                    (34947628153.461784, 2, "34947628153.46"),
+                    (34947628153.461784, 5, "34947628153.46178"),
+                ] {
+                    for sign in [1.0, -1.0] {
+                        let shown = format_number_with_step(sign * x, dp, step, &f).unwrap();
+                        let text = if sign < 0.0 { format!("−{expected}") } else { expected.into() };
+                        assert_eq!(shown.text, text, "x={x:?}, step={step:e}, dp={dp}, ties={ties:?}");
+                        assert_eq!(shown.value, sign * expected.parse::<f64>().unwrap());
+                    }
+                }
+            }
+        }
+    }
+
+    #[test]
+    fn step_and_final_decimal_rounding_carry_independently() {
+        // 9.975 / .05 = 199.5: both modes increment the step index to 200.
+        // 9.96 / .03 = 332 exactly: only the final rounding carries to 10.0.
+        // 1.26 / .1 = 12.6: the snap is 1.3, then zero decimals give 1 (not 1.26).
+        // 1.49 / .5 = 2.98: the snap is 1.5, then zero decimals give 2 (not 1).
+        for (x, step, dp, even, away) in [
+            (9.975, 0.05, 2, "10.00", "10.00"),
+            (9.96, 0.03, 1, "10.0", "10.0"),
+            (1.26, 0.1, 0, "1", "1"),
+            (1.49, 0.5, 0, "2", "2"),
+            (100000000000.25, 0.1, 0, "100000000000", "100000000000"),
+            (100000000000.25, 0.1, 1, "100000000000.2", "100000000000.3"),
+            (100000000000.25, 0.1, 2, "100000000000.20", "100000000000.30"),
+            (999999999999.75, 0.25, 0, "1000000000000", "1000000000000"),
+        ] {
+            for (ties, expected) in [(Ties::HalfEven, even), (Ties::HalfAwayFromZero, away)] {
+                let f = NumberFormat { ties, ..NumberFormat::default() };
+                for sign in [1.0, -1.0] {
+                    let shown = format_number_with_step(sign * x, dp, step, &f).unwrap();
+                    assert_eq!(shown.text, if sign < 0.0 { format!("−{expected}") } else { expected.into() });
+                    assert_eq!(shown.value, sign * expected.parse::<f64>().unwrap());
+                }
+            }
+        }
+    }
+
+    #[test]
+    fn step_rejects_invalid_inputs_and_out_of_range_snap() {
+        let f = NumberFormat::default();
+        for step in [0.0, -0.0, -0.5, f64::NAN, f64::INFINITY, f64::NEG_INFINITY, 1e6_f64.next_up()] {
+            assert!(matches!(format_number_with_step(1.0, 2, step, &f), Err(DocError::Invalid(_))));
+            assert!(matches!(format_value_with_step(1.0, Length, "mm", 2, step, &f), Err(DocError::Invalid(_))));
+        }
+        for x in [f64::NAN, f64::INFINITY, f64::NEG_INFINITY, 1e12_f64.next_up(), -1e12_f64.next_up()] {
+            assert!(matches!(format_number_with_step(x, 2, 0.5, &f), Err(DocError::Invalid(_))));
+        }
+        for dp in [9, 255] {
+            assert!(matches!(format_number_with_step(1.0, dp, 0.5, &f), Err(DocError::Invalid(_))));
+        }
+        for x in [1e12, -1e12] {
+            for ties in [Ties::HalfEven, Ties::HalfAwayFromZero] {
+                let f = NumberFormat { ties, ..f };
+                for step in [600_000.0, 0.6] {
+                    // The .6 snap has magnitude 1e12 + .2: reject it even though
+                    // zero decimal places would otherwise bring it back to 1e12.
+                    assert!(matches!(format_number_with_step(x, 0, step, &f), Err(DocError::Invalid(_))));
+                }
+            }
+            assert_eq!(format_number_with_step(x, 0, 1e6, &f).unwrap().value, x);
+        }
+        for (kind, unit) in [(Length, "deg"), (Angle, "mm"), (Length, "unknown")] {
+            assert!(matches!(format_value_with_step(1.0, kind, unit, 2, 0.5, &f), Err(DocError::Invalid(_))));
+        }
+    }
+
+    #[test]
+    fn step_units_options_and_input_preservation() {
+        let f = NumberFormat::default();
+        let input: f64 = 25.4 * 1.25;
+        let bits = input.to_bits();
+        assert_eq!(format_value_with_step(input, Length, "in", 1, 0.5, &f).unwrap().text, "1.0");
+        assert_eq!(input.to_bits(), bits);
+        assert_eq!(format_value_with_step(std::f64::consts::PI / 6.0, Angle, "deg", 1, 5.0, &f).unwrap().text, "30.0");
+        assert_eq!(format_value_with_step(1e15, Length, "m", 1, 10.0, &f).unwrap().value, 1e12);
+        let styled = NumberFormat { marker: DecimalMarker::Comma, groups: true, ..f };
+        assert_eq!(format_number_with_step(-12345.25, 2, 0.5, &styled).unwrap().text, "−12\u{202f}345,00");
+        let trim = NumberFormat { leading_zero: false, trailing_zeros: false, ..styled };
+        assert_eq!(format_number_with_step(-0.6, 3, 0.5, &trim).unwrap().text, "−,5");
+        assert_eq!(format_number_with_step(1.23456789, 8, 1e-8, &styled).unwrap().text, "1,234\u{202f}567\u{202f}89");
+        for (distance, expected) in [(0.4, "1.0"), (0.6, "0.5")] {
+            assert_eq!(format_value_with_step((0.75 - distance * 1e-4) * 1e-6, Length, "nm", 1, 0.5, &f).unwrap().text, expected);
+        }
+        for step in [1e6_f64.next_down(), 0.12345678901234567, 2.2250738585072014e-308] {
+            let shown = format_number_with_step(12345.6789, 8, step, &f).unwrap();
+            assert_eq!(shown.value, shown.text.parse::<f64>().unwrap());
+        }
+        // Explicitly keep both historical policies, including their different decimal ties.
+        assert_eq!(format_number(2.665, 2, &f).unwrap().text, "2.66");
+        assert_eq!(length_number(2.665, "mm", 2), "2.67");
+    }
+
+    #[test]
+    fn step_seeded_integer_reference_and_hostile_domain() {
+        let mut seed = 0x4896_1138_0abc_def1;
+        for _ in 0..20_000 {
+            // Independent bounded integer oracle: x and step are thousandths; dp=3.
+            let n = random(&mut seed) % 1_000_000;
+            let s = random(&mut seed) % 100_000 + 1;
+            for ties in [Ties::HalfEven, Ties::HalfAwayFromZero] {
+                let f = NumberFormat { ties, ..NumberFormat::default() };
+                let q = n / s;
+                let r = n % s;
+                let up = 2 * r > s || (2 * r == s && (ties == Ties::HalfAwayFromZero || q % 2 == 1));
+                let expected = (q + u64::from(up)) * s;
+                let text = format!("{}.{:03}", expected / 1000, expected % 1000);
+                let shown = format_number_with_step(n as f64 / 1000.0, 3, s as f64 / 1000.0, &f).unwrap();
+                assert_eq!(shown.text, text);
+                // Exercise arbitrary positive subnormals and normal steps without quotient overflow.
+                let step = f64::from_bits(random(&mut seed));
+                if step.is_finite() && step > 0.0 && step <= 1e6 {
+                    let shown = format_number_with_step(n as f64, 3, step, &f).unwrap();
+                    assert!(shown.value.is_finite() && shown.value >= 0.0);
+                    assert_eq!(shown.value, shown.text.parse::<f64>().unwrap());
+                }
+            }
+        }
+    }
+
    fn random(state: &mut u64) -> u64 {
        *state ^= *state << 13;
        *state ^= *state >> 7;
@@ -452,8 +452,14 @@ pub enum AxisRef {
    SketchAxis { axis: String },
    /// World X / Y / Z axis through the origin.
    World { axis: String },
-    /// Any line in the sketch plane, in world coordinates.
-    Line { origin: Position, dir: Dir },
+    /// Any line in the sketch plane, in world coordinates. The origin's coordinates are length
+    /// expressions, so the axis follows parameter changes.
+    Line {
+        #[serde(with = "point_expr")]
+        #[walk(placement)]
+        origin: PointExpr,
+        dir: Dir,
+    },
    /// An edge or round face of the model (a straight or circular edge, a cylinder, cone or
    /// torus face), found again on each evaluation: [`crate::construct::model_axis`].
    Model { geo: GeoRef },
@@ -734,6 +740,10 @@ pub enum FeatureKind {
        /// from the vertex instead of where the rounds meet (a constant-radius fillet only).
        #[serde(default, skip_serializing_if = "Vec::is_empty")]
        setbacks: Vec<CornerSetback>,
+        /// How two rounds turn where they meet at a sharp side edge: in a mitre (the default) or
+        /// swept round it (a constant-radius, exact, rolling-corner fillet without setbacks only).
+        #[serde(default, skip_serializing_if = "FilletTurn::is_mitre")]
+        turn: FilletTurn,
        /// Round each picked edge's tangent chain with it (the default: edges continuing it
        /// smoothly at its ends, as far as they go), or only the picked edges.
        #[serde(default = "yes", skip_serializing_if = "is_yes")]
@@ -1040,6 +1050,8 @@ pub enum FeatureKind {
    Split {
        body: BodyName,
        plane: PlaneRef,
+        // The tool face is picked (and named), so the split follows it (#11674).
+        #[walk(picks_faces)]
        #[serde(default, skip_serializing_if = "Option::is_none")]
        tool: Option<FaceAt>,
        /// A straight line of this sketch as the tool (#1552): the plane through it along the
@@ -1475,7 +1487,7 @@ pub enum FeatureKind {
    },
    /// Plastic lip (raised band) or groove (recess) along the rim face picked at `face`.
    Lip {
-        face: Position,
+        face: FacePick,
        #[walk(length = "Width")]
        width: Expr,
        #[walk(length = "Height")]
@@ -1971,6 +1983,38 @@ impl FilletCorner {
    }
 }

+/// How two constant rounds of one radius turn round a sharp, straight, convex side edge square to
+/// both on a plane, such as the rounds along a boss's base at its upright edges.
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
+#[serde(rename_all = "snake_case")]
+pub enum FilletTurn {
+    /// The rounds run on to where they cross and meet in a mitre.
+    #[default]
+    Mitre,
+    /// The rounds end at the side edge and the corner is their section revolved about it, a
+    /// torus tangent to both (`solidcraft_kernel::FilletTurn::Swept`).
+    Swept,
+}
+
+/// Why a swept turn is refused with a fillet's other options: the kernel sweeps the turn of two
+/// constant rounds of one radius, at its own corners only.
+pub const SWEPT_TAKES: &str = "a swept corner turns two constant rounds of one radius: `turn: swept` takes `type: constant`, \
+`corner: rolling`, no `setbacks` and `fit: exact` or `reduce`";
+
+impl FilletTurn {
+    pub fn is_mitre(&self) -> bool {
+        *self == FilletTurn::Mitre
+    }
+
+    /// The kernel's turn.
+    pub fn kernel(self) -> solidcraft_kernel::FilletTurn {
+        match self {
+            FilletTurn::Mitre => solidcraft_kernel::FilletTurn::Mitre,
+            FilletTurn::Swept => solidcraft_kernel::FilletTurn::Swept,
+        }
+    }
+}
+
 /// How Extend continues a surface past its edges.
 #[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
 #[serde(rename_all = "snake_case")]
@@ -2374,6 +2418,12 @@ pub enum HoleKind {
        #[serde(default, skip_serializing_if = "Option::is_none")]
        #[walk(angle = "Tip angle")]
        tip_angle: Option<Expr>,
+        /// Printing aid: two bridge layers this thick below the counterbore's floor (a slot along
+        /// X, then a square), so a printer bridges the step instead of sagging into it. Absent:
+        /// a plain counterbore.
+        #[serde(default, skip_serializing_if = "Option::is_none")]
+        #[walk(length = "Bridge layer")]
+        bridge: Option<Expr>,
    },
    Countersink {
        #[walk(length = "Countersink diameter")]
@@ -3860,6 +3910,7 @@ impl Document {
    /// Read a design file's JSON (any format this build knows; older ones are upgraded).
    pub fn from_json(s: &str) -> Result<Document> {
        crate::render_resources::check_json_budget(s)?;
+        crate::render_texture_resources::check_json_budget(s)?;
        let mut d = crate::format::read(s)?;
        if d.features.len() > MAX_FEATURES || d.params.len() > MAX_PARAMS {
            return Err(DocError::Invalid("document too large".into()));
@@ -16,14 +16,17 @@ use solidcraft_sketch::Sketch;
 use crate::eval::{PlacementReads, body_world, hash_placement, placement_digest};
 use crate::*;

-/// Work counted on this thread: bodies moved, STEP texts digested, joint faces and bodies
+/// Work counted on this thread: bodies moved, STEP/mesh contents digested, joint faces and bodies
 /// measured, bodies searched for by name, features searched for by id, bodies a cut (or
-/// intersect) ran its booleans on, bodies searched for the cylinder a tap marking lies on, and
-/// bodies whose faces a tapped hole read for its wall.
+/// intersect) ran its booleans on, bodies searched for the cylinder a tap marking lies on,
+/// bodies whose faces a tapped hole read for its wall, intersects run to find a pattern's copies
+/// that cut nothing, and the tools a cut of many tools is made with (one when they are cut in one
+/// go).
 #[derive(Clone, Copy, Debug, Default, PartialEq)]
 pub(super) struct Counts {
    pub moved: usize,
    pub digested: usize,
+    pub mesh_digested: usize,
    pub joint_faces: usize,
    pub measures: usize,
    pub body_searches: usize,
@@ -31,6 +34,8 @@ pub(super) struct Counts {
    pub cut: usize,
    pub cylinder_search: usize,
    pub tapped_wall: usize,
+    pub miss_intersects: usize,
+    pub cut_tools: usize,
 }

 thread_local! {
@@ -38,6 +43,7 @@ thread_local! {
        Cell::new(Counts {
            moved: 0,
            digested: 0,
+            mesh_digested: 0,
            joint_faces: 0,
            measures: 0,
            body_searches: 0,
@@ -45,6 +51,8 @@ thread_local! {
            cut: 0,
            cylinder_search: 0,
            tapped_wall: 0,
+            miss_intersects: 0,
+            cut_tools: 0,
        })
    };
 }
@@ -1484,3 +1492,297 @@ fn a_hole_into_a_rim_still_bores_its_sheet_beside_far_ones() {
    let bore = std::f64::consts::PI * (d / 2.0).powi(2) * 60.0;
    assert!((removed - bore).abs() < 0.02 * bore, "removed {removed} of {bore}");
 }
+
+/// A 1.5 mm disc of 50 mm radius with a 3.5 mm through hole at `radius` on X, patterned `count`
+/// times around Z (#9007). The pattern's id.
+fn disc_with_hole_pattern(doc: &mut Document, radius: f64, count: usize) -> u64 {
+    let disc = FeatureKind::Cylinder {
+        base: point_expr(Vec3::ZERO),
+        axis: Dir(Vec3::Z),
+        radius: "50".into(),
+        height: "1.5".into(),
+        operation: Operation::NewBody,
+        references: Vec::new(),
+    };
+    doc.add_feature(disc, Some("Disc")).unwrap();
+    let hole: FeatureKind = serde_json::from_value(serde_json::json!({
+        "type": "hole", "position": [radius, 0, 1.5], "direction": [0, 0, -1], "diameter": "3.5",
+    }))
+    .unwrap();
+    let hole = doc.add_feature(hole, Some("Hole")).unwrap();
+    hole_pattern(doc, hole, count)
+}
+
+fn hole_pattern(doc: &mut Document, hole: u64, count: usize) -> u64 {
+    let pattern: FeatureKind = serde_json::from_value(serde_json::json!({
+        "type": "pattern", "features": [hole],
+        "pattern": {"type": "circular", "origin": [0, 0, 0], "axis": [0, 0, 1], "count": count.to_string(), "angle": "360 deg"},
+    }))
+    .unwrap();
+    doc.add_feature(pattern, None).unwrap()
+}
+
+fn disc_volume(model: &Model) -> f64 {
+    let st = model.state();
+    assert_eq!(st.bodies.len(), 1);
+    kernel::measure(&st.bodies[0].body).unwrap().volume
+}
+
+#[test]
+fn a_circular_pattern_of_a_through_hole_cuts_its_copies_at_once() {
+    // The copies' tools run twice the disc's size along Z, so the kernel's box test, which
+    // grows each box by a share of the tool's size, finds them meeting (#9007); they are still
+    // 4.3 mm apart, centre to centre, and are cut in one go. No copy is intersected with the
+    // disc to see whether it takes material: each passes through the disc's material.
+    let mut doc = Document::new("sieve");
+    let pattern = disc_with_hole_pattern(&mut doc, 20.0, 29);
+    let mut model = Model::new();
+    let work = counted(|| model.evaluate(&doc));
+    assert!(model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{:?}", model.results);
+    assert_eq!((work.cut_tools, work.miss_intersects), (1, 0), "{work:?}");
+    let hole = std::f64::consts::PI * 1.75 * 1.75 * 1.5;
+    let disc = std::f64::consts::PI * 2500.0 * 1.5;
+    let v = disc_volume(&model);
+    assert!((v - (disc - 29.0 * hole)).abs() < 1e-3 * hole, "{v}");
+    // The same copies again, landing in the holes cut already: each is intersected, and each
+    // still counts as a copy that removes no material.
+    let hole_id = doc.features.iter().find(|f| f.name == "Hole").unwrap().id;
+    hole_pattern(&mut doc, hole_id, 29);
+    let work = counted(|| model.evaluate(&doc));
+    let again = model.results.last().unwrap();
+    assert!(again.error.is_none(), "{again:?}");
+    // (The kernel may add a note on a retry of a boolean on faces that lie on each other.)
+    assert!(again.warning.as_deref().is_some_and(|w| w.starts_with("28 of 28 cut copies remove no material")), "{again:?}");
+    assert_eq!(work.miss_intersects, 28, "{work:?}");
+    assert!((disc_volume(&model) - v).abs() < 1e-3 * hole);
+    assert!(model.results.iter().any(|r| r.id == pattern && r.warning.is_none()));
+}
+
+#[test]
+fn copies_of_a_hole_that_come_close_are_cut_one_by_one() {
+    // At 8.5 mm radius, 16 copies of a 3.5 mm hole overlap their neighbours: they are not apart,
+    // and each is cut on its own, as before.
+    let mut doc = Document::new("crowded");
+    disc_with_hole_pattern(&mut doc, 8.5, 16);
+    let mut model = Model::new();
+    let work = counted(|| model.evaluate(&doc));
+    assert!(model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{:?}", model.results);
+    assert_eq!((work.cut_tools, work.miss_intersects), (15, 0), "{work:?}");
+    // At 9 mm they come within 0.012 mm of each other without touching: their exact shapes are
+    // apart, so they are cut in one go, and all 16 holes are cut.
+    let mut doc = Document::new("close");
+    disc_with_hole_pattern(&mut doc, 9.0, 16);
+    let mut model = Model::new();
+    let work = counted(|| model.evaluate(&doc));
+    assert!(model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{:?}", model.results);
+    assert_eq!((work.cut_tools, work.miss_intersects), (1, 0), "{work:?}");
+    let hole = std::f64::consts::PI * 1.75 * 1.75 * 1.5;
+    let disc = std::f64::consts::PI * 2500.0 * 1.5;
+    let v = disc_volume(&model);
+    assert!((v - (disc - 16.0 * hole)).abs() < 1e-3 * hole, "{v}");
+}
+
+/// A ring (25 mm outside, 16 mm bore, 55 mm high) with a blind groove, 8 mm wide and 30 mm deep,
+/// cut into its bore from below, in a circular pattern of ten about Z: their boxes, grown as the
+/// kernel grows them, meet, their exact shapes are 1.9 mm apart. The ring's faces counted as its
+/// surfaces are, and the work.
+fn grooved_ring_faces() -> (usize, Counts) {
+    let mut doc = Document::new("grooves");
+    let cylinder = |base: Vec3, radius: &str, height: &str, operation: Operation| FeatureKind::Cylinder {
+        base: point_expr(base),
+        axis: Dir(Vec3::Z),
+        radius: radius.into(),
+        height: height.into(),
+        operation,
+        references: Vec::new(),
+    };
+    doc.add_feature(cylinder(Vec3::ZERO, "25", "55", Operation::NewBody), Some("Ring")).unwrap();
+    doc.add_feature(cylinder(Vec3::new(0.0, 0.0, -1.0), "16", "57", Operation::Cut), Some("Bore")).unwrap();
+    let groove = doc.add_feature(cylinder(Vec3::new(16.0, 0.0, -1.0), "4", "31", Operation::Cut), Some("Groove")).unwrap();
+    hole_pattern(&mut doc, groove, 10);
+    let mut model = Model::new();
+    let work = counted(|| model.evaluate(&doc));
+    assert!(model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{:?}", model.results);
+    let st = model.state();
+    assert_eq!(st.bodies.len(), 1);
+    (kernel::measure(&st.bodies[0].body).unwrap().merged.faces, work)
+}
+
+#[test]
+fn copies_that_notch_the_same_round_face_cut_at_once_leave_the_faces_of_one_by_one() {
+    // The ten grooves notch the same round bore. Cut all in one go, they leave it in as many
+    // faces as cutting them one after another does (#9007).
+    let (patterned, work) = grooved_ring_faces();
+    let cut = |a: kernel::Body, b: &kernel::Body| kernel::boolean(&a, b, kernel::BoolOp::Cut).unwrap().unwrap();
+    let ring =
+        cut(kernel::cylinder(Vec3::ZERO, Vec3::Z, 25.0, 55.0).unwrap(), &kernel::cylinder(Vec3::new(0.0, 0.0, -1.0), Vec3::Z, 16.0, 57.0).unwrap());
+    let groove = kernel::cylinder(Vec3::new(16.0, 0.0, -1.0), Vec3::Z, 4.0, 31.0).unwrap();
+    let one_by_one = (0..10).fold(ring, |ring, k| {
+        let copy = kernel::transform(&groove, Vec3::ZERO, Vec3::ZERO, Vec3::Z, (36.0 * k as f64).to_radians()).unwrap();
+        cut(ring, &copy)
+    });
+    assert_eq!(patterned, kernel::measure(&one_by_one).unwrap().merged.faces);
+    assert_eq!(work.cut_tools, 1, "{work:?}");
+}
+
+#[test]
+fn tools_are_apart_only_when_they_neither_meet_nor_nest() {
+    let rod = |x: f64, y: f64, r: f64| kernel::cylinder(Vec3::new(x, y, -100.0), Vec3::Z, r, 200.0).unwrap();
+    // Long rods whose boxes, grown as the kernel grows them, meet: 0.5 mm apart.
+    assert!(super::tools_clearly_apart(&[rod(0.0, 0.0, 1.0), rod(2.5, 0.0, 1.0)]));
+    // Touching, crossing and nested rods are not apart.
+    assert!(!super::tools_clearly_apart(&[rod(0.0, 0.0, 1.0), rod(2.0, 0.0, 1.0)]));
+    assert!(!super::tools_clearly_apart(&[rod(0.0, 0.0, 1.0), rod(1.5, 0.0, 1.0)]));
+    assert!(!super::tools_clearly_apart(&[rod(0.0, 0.0, 3.0), rod(0.5, 0.0, 1.0)]));
+    let tube = kernel::boolean(&rod(0.0, 0.0, 5.0), &rod(0.0, 0.0, 4.0), kernel::BoolOp::Cut).unwrap().unwrap();
+    assert!(!super::tools_clearly_apart(&[tube.clone(), rod(0.0, 0.0, 4.5)]));
+    // A rod in the tube's bore, clear of its wall, is apart from it.
+    assert!(super::tools_clearly_apart(&[tube, rod(0.0, 0.0, 3.0)]));
+}
+
+fn imported_meshes() -> Document {
+    let mut doc = Document::new("reference meshes");
+    let comp = doc.add_component(Some("Part"), 0).unwrap();
+    let meshes = (0..2)
+        .map(|i| MeshData {
+            name: format!("Mesh{i}"),
+            positions: [0.0, 0.0, 0.0, 2.0, 0.0, 0.0, 0.0, 3.0, 0.0, 0.0, 0.0, 4.0].into(),
+            triangles: [0, 2, 1, 0, 1, 3, 0, 3, 2, 1, 2, 3].into(),
+            color: Some([0.2, 0.4, 0.6]),
+        })
+        .collect();
+    let id = doc.add_feature(FeatureKind::MeshImport { file: "tetrahedra.stl".into(), meshes }, Some("Meshes")).unwrap();
+    doc.feature_mut(id).unwrap().component = comp;
+    doc
+}
+
+fn meshes_mut(doc: &mut Document) -> &mut Vec<MeshData> {
+    let FeatureKind::MeshImport { meshes, .. } = &mut doc.features[0].kind else { panic!("mesh fixture") };
+    meshes
+}
+
+fn same_as_fresh(doc: &Document, model: &Model) {
+    let mut fresh = Model::new();
+    fresh.no_cache = true;
+    fresh.evaluate(doc);
+    assert_eq!(model.results.iter().map(|r| r.fingerprint).collect::<Vec<_>>(), fresh.results.iter().map(|r| r.fingerprint).collect::<Vec<_>>());
+    let (actual, expected) = (model.state(), fresh.state());
+    assert_eq!(actual.bodies.len(), expected.bodies.len());
+    for (a, b) in actual.bodies.iter().zip(&expected.bodies) {
+        assert_eq!(a.name, b.name);
+        assert_eq!(a.mesh().positions, b.mesh().positions);
+        assert_eq!(a.mesh().triangles, b.mesh().triangles);
+        assert_eq!(a.body.color(), b.body.color());
+    }
+    assert!(model.results.iter().all(|r| r.error.is_none()));
+}
+
+#[test]
+fn unchanged_mesh_payloads_are_not_read_again_for_rigid_motion() {
+    let mut doc = imported_meshes();
+    let mut model = Model::new();
+    assert_eq!(counted(|| model.evaluate(&doc)).mesh_digested, 2);
+    for k in 1..5 {
+        doc = doc.clone(); // Undo/preview copies share the arrays, not the document itself.
+        doc.occurrences[0].transform = rigid(Vec3::new(f64::from(k), 2.0, 3.0), Vec3::ZERO, Vec3::Z, 0.1 * f64::from(k));
+        assert_eq!(
+            counted(|| {
+                model.evaluate(&doc);
+                assert!(model.is_current(&doc));
+            })
+            .mesh_digested,
+            0
+        );
+        assert_eq!(model.last_recomputed, 0);
+        same_as_fresh(&doc, &model);
+    }
+    let saved = serde_json::to_string(&doc).unwrap();
+    let reopened: Document = serde_json::from_str(&saved).unwrap();
+    assert_eq!(counted(|| model.evaluate(&reopened)).mesh_digested, 2, "new array identities must be checked");
+    assert_eq!(model.last_recomputed, 0, "equal content has equal fingerprints");
+    same_as_fresh(&reopened, &model);
+}
+
+#[test]
+fn mesh_payload_edits_invalidate_the_cache_and_undo_restores_the_geometry() {
+    let mut doc = imported_meshes();
+    let original = doc.clone();
+    let mut model = Model::new();
+    model.evaluate(&doc);
+    let fingerprint = model.results[0].fingerprint;
+    Arc::make_mut(&mut meshes_mut(&mut doc)[0].positions)[3] = 5.0;
+    assert!(!model.is_current(&doc));
+    assert_eq!(counted(|| model.evaluate(&doc)).mesh_digested, 1);
+    assert_ne!(model.results[0].fingerprint, fingerprint);
+    same_as_fresh(&doc, &model);
+    let edited = doc.clone();
+    Arc::make_mut(&mut meshes_mut(&mut doc)[0].triangles).swap(0, 1);
+    assert_eq!(counted(|| model.evaluate(&doc)).mesh_digested, 1);
+    same_as_fresh(&doc, &model);
+    for restored in [&original, &edited, &original] {
+        model.evaluate(restored);
+        same_as_fresh(restored, &model);
+    }
+    assert_eq!(model.results[0].fingerprint, fingerprint);
+}
+
+#[test]
+fn mesh_metadata_and_order_remain_part_of_the_fingerprint() {
+    let mut doc = imported_meshes();
+    let mut model = Model::new();
+    model.evaluate(&doc);
+    for edit in 0..7 {
+        let before = model.results[0].fingerprint;
+        match edit {
+            0 => meshes_mut(&mut doc)[0].name = "Renamed".into(),
+            1 => meshes_mut(&mut doc)[0].color = Some([0.8, 0.1, 0.3]),
+            2 => doc.features[0].name = "Renamed feature".into(),
+            3 => meshes_mut(&mut doc).swap(0, 1),
+            4 => {
+                meshes_mut(&mut doc).pop();
+            }
+            5 => {
+                let mesh = meshes_mut(&mut doc)[0].clone();
+                meshes_mut(&mut doc).push(MeshData { name: "Added".into(), ..mesh });
+            }
+            _ => {
+                let FeatureKind::MeshImport { file, .. } = &mut doc.features[0].kind else { panic!("mesh fixture") };
+                *file = "renamed.stl".into();
+            }
+        }
+        assert!(!model.is_current(&doc));
+        let work = counted(|| model.evaluate(&doc));
+        if edit < 3 || edit == 6 {
+            assert_eq!(work.mesh_digested, 0, "metadata alone: {edit}");
+        }
+        assert_ne!(model.results[0].fingerprint, before, "edit {edit}");
+        same_as_fresh(&doc, &model);
+    }
+}
+
+#[test]
+fn an_added_and_deleted_sketch_entity_keeps_its_fingerprint() {
+    let mut doc = Document::new("sketch fingerprint");
+    let id = doc.add_feature(line_sketch(PlaneRef::Origin { name: "XY".into() }, Vec2::new(10.0, 0.0)), None).unwrap();
+    let mut model = Model::new();
+    model.evaluate(&doc);
+    let key = model.state().sketch_keys.get(&id).copied();
+    let json = super::feature_json(doc.feature(id).unwrap(), &super::ImportDigests::default());
+
+    // Make and delete an id: the counters advance, but the geometry is the same.
+    {
+        let sk = doc.sketch_mut(id).unwrap();
+        let a = sk.add_point(Vec2::new(2.0, 2.0), None).unwrap();
+        let b = sk.add_point(Vec2::new(3.0, 2.0), None).unwrap();
+        let line = sk.add_line_pts(a, b, None).unwrap();
+        sk.remove_curves(&[line]);
+        sk.remove_points(&[b]);
+        sk.remove_points(&[a]);
+    }
+
+    let json_after = super::feature_json(doc.feature(id).unwrap(), &super::ImportDigests::default());
+    assert_eq!(json, json_after, "deleted ids are not geometry");
+    model.evaluate(&doc);
+    assert_eq!(model.state().sketch_keys.get(&id).copied(), key);
+    assert_eq!((model.last_recomputed, model.last_restored), (0, 0));
+}
@@ -8,7 +8,7 @@ use crate::sheet;
 use solidcore_record::{Loop2, Seg2};
 use solidcraft_geom::{Aabb3, Ring};

-pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature, st: &mut ModelState) -> Result<()> {
+pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature, st: &mut ModelState, warning: &mut Option<String>) -> Result<()> {
    match &f.kind {
        FeatureKind::Emboss { sketch, profiles, depth, deboss, targets, face } => {
            let ss = st.sketch(sketch.0).ok_or_else(|| DocError::Unknown(format!("sketch {sketch}")))?;
@@ -59,7 +59,20 @@ pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature,
            if st.bodies.is_empty() {
                return Err(DocError::Invalid("there is no body to emboss".into()));
            }
-            apply_op(doc, st, f, tools, if *deboss { Operation::Cut } else { Operation::Join }, &crate::plain(targets))
+            // #10940: an emboss or deboss whose tool lies clear of the body (a sketch on the far
+            // side of the material, a depth that stops short) used to report success and change
+            // nothing. Say so: the body is compared before and after, as the command's reply does.
+            let before: Vec<Body> = st.bodies.iter().map(|b| b.body.clone()).collect();
+            apply_op(doc, st, f, tools, if *deboss { Operation::Cut } else { Operation::Join }, &crate::plain(targets))?;
+            let unchanged = st.bodies.len() == before.len() && st.bodies.iter().zip(&before).all(|(b, old)| old.same(&b.body));
+            if unchanged {
+                let what = if *deboss { "deboss" } else { "emboss" };
+                append_warning(
+                    warning,
+                    format!("the {what} changed nothing; check where its profile lies, which side of the face the sketch is on, and the depth"),
+                );
+            }
+            Ok(())
        }
        FeatureKind::Rib { .. } => {
            let tools = rib_tools(vals, st, f, None)?;
@@ -2318,11 +2331,16 @@ pub(super) fn plastic_eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &F
                _ => false,
            };
            let (Some(_), Some(_), false) = (outer, openings.first(), alike) else {
+                // A solid box top has no opening: Shell that face first, then pick the rim
+                // around the cavity (#10437).
                let what = match (loops.len(), openings.len()) {
-                    (0 | 1, _) => "pick the rim face of a shelled body (a face with an inner and an outer edge)".to_string(),
-                    (_, 0) => "pick the rim face of a shelled body: this face's inner edges are where other features stand on it, not an opening"
+                    (0 | 1, _) => "Lip needs the rim of a shelled body: Shell a face open first, then pick the rim around that opening (a face with an outer edge and an inner hole)"
                        .to_string(),
-                    (_, k) => format!("pick the rim face of a shelled body (round one opening): this face has {k} openings alike in size"),
+                    (_, 0) => "Lip needs a rim around an opening: this face's inner edges are where other features stand on it, not a shell cavity. Shell a face open, then pick that rim"
+                        .to_string(),
+                    (_, k) => format!(
+                        "Lip needs one clear opening as the rim: this face has {k} openings alike in size (for example a plate of holes). Shell one cavity, or pick a rim that rings a single opening"
+                    ),
                };
                return Err(DocError::Invalid(what));
            };
@@ -63,13 +63,16 @@ pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature,
            let t = val(vals, thickness, Kind::Length)?;
            let mut tools = Vec::new();
            for n in bodies {
-                let b = st.body(n).ok_or_else(|| DocError::Unknown(format!("body `{n}`")))?;
-                tools.push(kernel::thicken(&b.body, t, *symmetric)?);
+                let b = st.body(n).cloned().ok_or_else(|| DocError::Unknown(format!("body `{n}`")))?;
+                // Kept face, offset and edge walls. Carry that history so a sketch can attach
+                // to the solid's faces and follow the thickness (#7641).
+                let thickened = kernel::thicken(&b.body, t, *symmetric)?;
+                tools.push(Traced::step(thickened, &[&b.traced()]));
            }
            if tools.is_empty() {
                return Err(DocError::Invalid("pick the surfaces to thicken".into()));
            }
-            apply_op(doc, st, f, tools, *operation, &crate::plain(targets))
+            apply_traced(doc, st, f, tools, *operation, &crate::plain(targets))
        }
        FeatureKind::SurfaceTrim { body, plane, tool, keep, keep_more, curves, with, keep_with, stitch, extend } => {
            let i = st.bodies.iter().position(|b| &b.name == body).ok_or_else(|| DocError::Unknown(format!("body `{body}`")))?;
@@ -308,7 +311,7 @@ pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature,
                st.sketch(sketch.0).ok_or_else(|| DocError::Unknown(format!("sketch {sketch} (it must come earlier in the timeline)")))?,
                f.component,
            )?;
-            let (o, d) = revolve_axis(&ss, axis, &*super::axis_state(doc, st, f.component, axis)?, &|name| {
+            let (o, d) = revolve_axis(vals, &ss, axis, &*super::axis_state(doc, st, f.component, axis)?, &|name| {
                construction_axis_in(Some(doc), st, name, f.component)
            })?;
            let a = val(vals, angle, Kind::Angle)?;
@@ -103,6 +103,11 @@ enum End {
    /// At (or within half a pitch of) an end of the face where material goes on past it, a
    /// shoulder, a head, a blind hole's bottom: the groove stops short, clear of it.
    Closed,
+    /// At an end of an external thread's face where a shoulder starts and stays beyond the face's
+    /// end: the groove runs on through the plane of that end and is trimmed there, so the root
+    /// reaches the shoulder at every angle, a nut bottoms out on it, and nothing past the plane
+    /// is cut.
+    Shoulder,
    /// Inside the face: the groove stops square there.
    Inside,
 }
@@ -121,6 +126,9 @@ pub(super) struct ThreadOn {
    /// A modelled internal thread in a hole wider than it needs: the radius the bore is narrowed
    /// to (the thread's minor radius) before the groove is cut, with the hole's own radius.
    narrow: Option<f64>,
+    /// A shoulder keeps the square stop because the kernel couldn't check whether it stays beyond
+    /// the face's end.
+    shoulder_unchecked: bool,
 }

 /// The free-end test of a face's two ends (`side` 0 at its start, 1 at its end), each made
@@ -160,6 +168,22 @@ impl FaceEnds<'_> {
        }
        Ok(free)
    }
+
+    /// Does the shoulder at this closed end stay beyond the plane of the face's end? Not where it
+    /// rises back along the face (a slanted plate, a boss on a round body), which a groove
+    /// running to that plane would cut into: there is material outside the face just inside it.
+    /// The caller keeps the square stop, and says so, when the kernel can't make the check.
+    fn clear_of_end_plane(&self, side: usize) -> Result<bool> {
+        #[cfg(test)]
+        if tests::FAIL_CLEARANCE.get() {
+            return Err(kernel::KernelError::Failed("clearance refused for the test".into()).into());
+        }
+        let (p, e) = (self.pitch, self.pitch * 1e-3);
+        let inside = if side == 0 { (self.cyl.start + e, self.cyl.start + p) } else { (self.cyl.end - p, self.cyl.end - e) };
+        // All the radii the groove cuts beyond the face; only touching their rims is not in its
+        // way, as in `free`.
+        kernel::material_in_ring(self.body, self.cyl, self.beyond.0 + e, self.beyond.1 - e, inside).map(|hit| !hit).map_err(DocError::from)
+    }
 }

 /// A thread on the cylindrical face at `p`: its size, and the part of the face it runs over.
@@ -333,11 +357,23 @@ pub(super) fn thread_on(st: &ModelState, feature: u64, p: Vec3, ask: &ThreadAsk)
    // How each end of the thread meets the face: at a face end, or within half a pitch (and its
    // runout) of one, where the groove would reach past it, that end's free-end test decides.
    let near = |at: f64, side: usize| if side == 0 { at - lo } else { hi - at } < pitch / 2.0 + ease.get(side).copied().unwrap_or(0.0);
+    // A shoulder whose check the kernel couldn't make keeps the square stop, and the feature says so.
+    let mut unchecked = false;
    let mut kind = |at: f64, side: usize| -> Result<End> {
        Ok(if !ask.modeled || !near(at, side) {
            End::Inside
        } else if !ends.free(side)? {
-            End::Closed
+            let at_end = (if side == 0 { at - lo } else { hi - at }) < pitch * 1e-3;
+            let square = ease.get(side).copied().unwrap_or(0.0) == 0.0;
+            let clear = at_end && square && !cyl.internal && !form.is_taper() && {
+                let check = ends.clear_of_end_plane(side);
+                unchecked |= matches!(check, Err(DocError::Kernel(_)));
+                match check {
+                    Err(DocError::Kernel(_)) => false,
+                    other => other?,
+                }
+            };
+            if clear { End::Shoulder } else { End::Closed }
        } else if (if side == 0 { at - lo } else { hi - at }) < pitch * 1e-3 {
            End::Free
        } else {
@@ -373,7 +409,7 @@ pub(super) fn thread_on(st: &ModelState, feature: u64, p: Vec3, ask: &ThreadAsk)
        .then(|| form.groove(major, pitch, true))
        .filter(|g| !(g.root_r - cyl.radius >= g.basic_depth / 4.0))
        .map(|g| g.crest_r);
-    Ok(ThreadOn { info, cyl, ends, steep: ask.steep, ease, from: side, narrow })
+    Ok(ThreadOn { info, cyl, ends, steep: ask.steep, ease, from: side, narrow, shoulder_unchecked: unchecked })
 }

 /// The end of the face (0: its start, 1: its end) a thread of limited length starts at: the end
@@ -536,7 +572,9 @@ fn thread_grooves(
    // Past a free end of the face the groove runs out into the air, a pitch beyond it. Before
    // a closed one it stops with its section clear of the face's end (its centre as far inside
    // as the section reaches that way), so it never cuts into the shoulder there; inside the
-    // face it stops square at the threaded length's end.
+    // face it stops square at the threaded length's end. At a shoulder it can be trimmed against
+    // ([`End::Shoulder`]) its whole section runs past the plane of the face's end, so every angle
+    // of the last turn is cut down to that plane ([`trim_at_shoulders`] takes off the rest).
    //
    // A runout `e` at an end (ISO 3508) fades the groove out over `e`: its section moves out of
    // the material (an external thread's away from the axis, past the surface; an internal
@@ -548,12 +586,14 @@ fn thread_grooves(
        (End::Free, false) => t.start - p,
        (End::Free, true) => t.start,
        (End::Closed, _) => (t.start - ease[0]).max(face.0 + w_lo),
+        (End::Shoulder, _) => face.0 - w_hi - 0.1 * p,
        (End::Inside, _) => t.start - ease[0],
    };
    let s1 = match (ends[1], ease[1] > 0.0) {
        (End::Free, false) => t.end + p,
        (End::Free, true) => t.end,
        (End::Closed, _) => (t.end + ease[1]).min(face.1 - w_hi),
+        (End::Shoulder, _) => face.1 + w_lo + 0.1 * p,
        (End::Inside, _) => t.end + ease[1],
    };
    if !(s1 - s0 > p * 1e-3) {
@@ -698,6 +738,24 @@ fn taper_envelope(t: &ThreadInfo, radius: f64, ends: [End; 2], (d0, from): (f64,
    Ok(ring.pop())
 }

+/// The groove with what runs past a shoulder's plane taken off ([`End::Shoulder`]), so cutting it
+/// leaves the shoulder whole.
+fn trim_at_shoulders(mut tool: Body, axis: Vec3, ends: [End; 2], face: (f64, f64), k: UnitVec3) -> Result<Body> {
+    for (end, at, keep_positive) in [(ends[0], face.0, true), (ends[1], face.1, false)] {
+        if end != End::Shoulder {
+            continue;
+        }
+        let plane = Plane::from_normal(axis + k * at, *k).ok_or_else(|| DocError::Invalid("thread axis".into()))?;
+        // An error of the cut, like the kernel's own: `cut` then falls back to the square stop.
+        let missed = || kernel::KernelError::Failed("the thread's groove misses its face".into());
+        let kept = kernel::half_space(&tool, &plane, keep_positive)?.0;
+        #[cfg(test)]
+        let kept = kept.filter(|_| !tests::EMPTY_TRIM.get());
+        tool = kept.ok_or_else(missed)?;
+    }
+    Ok(tool)
+}
+
 /// Evaluate a thread feature: a cosmetic thread is listed in the model's threads, a modelled
 /// one cut into its body.
 pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature, st: &mut ModelState, warning: &mut Option<String>) -> Result<()> {
@@ -768,7 +826,13 @@ pub(super) fn eval(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature,
            None => note,
        });
    }
-    cut(st, on, (*tip, angle, depth))
+    if let Some(note) = cut(st, on, (*tip, angle, depth))? {
+        *warning = Some(match warning.take() {
+            Some(w) => format!("{w}; {note}"),
+            None => note,
+        });
+    }
+    Ok(())
 }

 /// A runout as (mm, pitches): ISO 3508's standard 2.5 P and short 1.25 P, or a length.
@@ -783,9 +847,10 @@ pub(super) fn runout(vals: &BTreeMap<String, Value>, e: &Option<crate::ThreadRun

 /// Cut a modelled thread resolved on its face into its body: the grooves (SMLib's exact screw
 /// sweeps, a taper's crests by its envelope) by one B-rep boolean, then the chamfered tip
-/// (`tip`, with its angle and depth when given).
-pub(super) fn cut(st: &mut ModelState, on: ThreadOn, (tip, angle, depth): (ThreadTip, Option<f64>, Option<f64>)) -> Result<()> {
-    let ThreadOn { info: t, cyl, ends, steep, ease, from: from_side, narrow } = on;
+/// (`tip`, with its angle and depth when given). What the user should be told about the result, if
+/// anything, is returned.
+pub(super) fn cut(st: &mut ModelState, on: ThreadOn, (tip, angle, depth): (ThreadTip, Option<f64>, Option<f64>)) -> Result<Option<String>> {
+    let ThreadOn { info: t, cyl, ends, steep, ease, from: from_side, narrow, shoulder_unchecked } = on;
    let i = st.bodies.iter().position(|b| b.name == t.body).ok_or_else(|| DocError::Invalid("threaded body".into()))?;
    let Some(mb) = st.bodies.get(i).cloned() else { return Err(DocError::Invalid("body".into())) };
    let (mut input, radius) = (mb.traced(), cyl.radius);
@@ -822,21 +887,46 @@ pub(super) fn cut(st: &mut ModelState, on: ThreadOn, (tip, angle, depth): (Threa
        }
        false => None,
    };
-    let mut grooves = Vec::new();
-    for g in thread_grooves(&t, groove_radius, (cyl.start, cyl.end), ends, steep, ease, taper)? {
-        let section = Region2 { outer: solidcore_record::Loop2::polygon(&g.section), holes: Vec::new() };
-        grooves.push(kernel::sweep_helix_radial(&g.plane, &section, g.base, g.axis, g.pitch, g.turns, &g.law)?);
-    }
-    if let Some(taper) = taper
-        && let Some(envelope) = taper_envelope(&t, radius, ends, taper)?
-    {
-        grooves.push(envelope);
-    }
-    let tool = match grooves.as_slice() {
-        [one] => one.clone(),
-        many => kernel::union_all(&many.iter().collect::<Vec<_>>())?,
+    let cut_grooves = |ends: [End; 2]| -> Result<(Option<Body>, usize)> {
+        let mut grooves = Vec::new();
+        for g in thread_grooves(&t, groove_radius, (cyl.start, cyl.end), ends, steep, ease, taper)? {
+            let section = Region2 { outer: solidcore_record::Loop2::polygon(&g.section), holes: Vec::new() };
+            grooves.push(kernel::sweep_helix_radial(&g.plane, &section, g.base, g.axis, g.pitch, g.turns, &g.law)?);
+        }
+        if let Some(taper) = taper
+            && let Some(envelope) = taper_envelope(&t, radius, ends, taper)?
+        {
+            grooves.push(envelope);
+        }
+        let tool = match grooves.as_slice() {
+            [one] => one.clone(),
+            many => kernel::union_all(&many.iter().collect::<Vec<_>>())?,
+        };
+        let tool = trim_at_shoulders(tool, t.axis_point, ends, (cyl.start, cyl.end), t.axis)?;
+        let cut = kernel::boolean(&input.body, &tool, BoolOp::Cut)?;
+        // Now rather than at the feature's end, where it could only fail the feature.
+        if ends.contains(&End::Shoulder)
+            && let Some(body) = &cut
+        {
+            kernel::check_kept(body)?;
+        }
+        Ok((cut, tool.face_count()))
    };
-    let (nb, groove_faces) = (kernel::boolean(&input.body, &tool, BoolOp::Cut)?, tool.face_count());
+    // A design that built with the square stop keeps building: where the kernel can't make the
+    // trimmed cut, the groove stops clear of the shoulder as it did, and the feature says so.
+    let mut made = cut_grooves(ends);
+    let mut square_stop = shoulder_unchecked;
+    if matches!(made, Err(DocError::Kernel(_))) && ends.contains(&End::Shoulder) {
+        made = cut_grooves(ends.map(|e| if e == End::Shoulder { End::Closed } else { e }));
+        square_stop = true;
+    }
+    let note = (square_stop && made.is_ok()).then(|| {
+        format!(
+            "the {} thread's groove could not be run down to the shoulder here, so it stops clear of it and its last turn is left uncut",
+            t.designation
+        )
+    });
+    let (nb, groove_faces) = made?;
    let nb = nb.ok_or_else(|| DocError::Invalid("the thread removed everything".into()))?;
    // The groove's faces have no role to name them by.
    let groove = crate::lineage::Lineage::unnamed_faces(groove_faces);
@@ -854,7 +944,7 @@ pub(super) fn cut(st: &mut ModelState, on: ThreadOn, (tip, angle, depth): (Threa
    if let Some(slot) = st.bodies.get_mut(i) {
        *slot = ModelBody::traced_new(mb.name, nb, mb.feature);
    }
-    Ok(())
+    Ok(note)
 }

 /// The chamfered tip of an external thread (ISO 4753, chamfered end CH) at the free ends `tip`
@@ -937,3 +1027,99 @@ fn tip_cones(
    }
    Ok(out)
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use std::cell::Cell;
+
+    thread_local! {
+        /// Make [`trim_at_shoulders`] find nothing of the groove left.
+        pub(super) static EMPTY_TRIM: Cell<bool> = const { Cell::new(false) };
+        /// Make the rising-shoulder check fail as the kernel would.
+        pub(super) static FAIL_CLEARANCE: Cell<bool> = const { Cell::new(false) };
+    }
+
+    fn ask() -> ThreadAsk<'static> {
+        ThreadAsk {
+            form: None,
+            designation: Some("M10"),
+            hand: ThreadHand::Right,
+            starts: 1,
+            steep: SteepFlank::default(),
+            extent: Extent::Full,
+            from: None,
+            modeled: true,
+            ease_out: (0.0, 0.0),
+            tapped: false,
+            old_auto_size: false,
+        }
+    }
+
+    /// How a thread's ends meet the face at (5, 0, z) of `body`.
+    fn ends_of(body: Body, z: f64) -> [End; 2] {
+        let mut st = ModelState::default();
+        st.bodies.push(ModelBody::new("Part".into(), body, 1));
+        thread_on(&st, 1, Vec3::new(5.0, 0.0, z), &ask()).unwrap().ends
+    }
+
+    /// A shoulder that stays beyond the face's end takes the trim. One rising back along the face
+    /// (a slanted plate, a boss on a round body) keeps the square stop.
+    #[test]
+    fn only_a_shoulder_that_stays_beyond_the_faces_end_takes_the_trim() {
+        let z = Vec3::new(0.0, 0.0, 1.0);
+        let join = |a: &Body, b: &Body| kernel::boolean(a, b, BoolOp::Union).unwrap().unwrap();
+        let boss = kernel::cylinder(Vec3::new(0.0, 0.0, 2.0), z, 5.0, 26.0).unwrap();
+        let plate = kernel::box_solid(Vec3::new(-20.0, -20.0, -6.0), Vec3::new(20.0, 20.0, 2.0)).unwrap();
+        let flat = ends_of(join(&plate, &boss), 20.0);
+        assert!(flat.contains(&End::Shoulder), "{flat:?}");
+        let tilted = kernel::cylinder(Vec3::new(0.0, 0.0, 0.0), Vec3::new(0.2, 0.0, 1.0), 20.0, 6.0).unwrap();
+        let slanted = ends_of(join(&tilted, &boss), 20.0);
+        assert!(slanted.contains(&End::Closed) && !slanted.contains(&End::Shoulder), "{slanted:?}");
+        let round = kernel::cylinder(Vec3::new(0.0, -20.0, 0.0), Vec3::new(0.0, 1.0, 0.0), 10.0, 40.0).unwrap();
+        let on_round = ends_of(join(&round, &boss), 20.0);
+        assert!(on_round.contains(&End::Closed) && !on_round.contains(&End::Shoulder), "{on_round:?}");
+    }
+
+    /// Where the kernel can't check the shoulder, the thread still builds with the square stop, and
+    /// the feature says its last turn is left uncut.
+    #[test]
+    fn a_shoulder_the_kernel_cannot_check_keeps_the_square_stop_and_says_so() {
+        let plate = kernel::box_solid(Vec3::new(-20.0, -20.0, 0.0), Vec3::new(20.0, 20.0, 6.0)).unwrap();
+        let boss = kernel::cylinder(Vec3::new(0.0, 0.0, 6.0), Vec3::new(0.0, 0.0, 1.0), 5.0, 16.0).unwrap();
+        let body = kernel::boolean(&plate, &boss, BoolOp::Union).unwrap().unwrap();
+        let mut st = ModelState::default();
+        st.bodies.push(ModelBody::new("Part".into(), body, 1));
+        FAIL_CLEARANCE.set(true);
+        let on = thread_on(&st, 1, Vec3::new(5.0, 0.0, 14.0), &ask());
+        FAIL_CLEARANCE.set(false);
+        let on = on.unwrap();
+        assert!(on.ends.contains(&End::Closed) && !on.ends.contains(&End::Shoulder), "{:?}", on.ends);
+        let note = cut(&mut st, on, (ThreadTip::None, None, None)).unwrap();
+        assert!(note.is_some_and(|n| n.contains("M10") && n.contains("left uncut")));
+    }
+
+    /// Where the trim leaves nothing of the groove, a thread at a shoulder that built with the
+    /// square stop still builds with it, and the feature says its last turn is left uncut.
+    #[test]
+    fn a_shoulder_cut_the_kernel_refuses_falls_back_to_the_square_stop_and_says_so() {
+        let plate = kernel::box_solid(Vec3::new(-20.0, -20.0, 0.0), Vec3::new(20.0, 20.0, 6.0)).unwrap();
+        let boss = kernel::cylinder(Vec3::new(0.0, 0.0, 6.0), Vec3::new(0.0, 0.0, 1.0), 5.0, 16.0).unwrap();
+        let body = kernel::boolean(&plate, &boss, BoolOp::Union).unwrap().unwrap();
+        let build = |fail: bool| {
+            let mut st = ModelState::default();
+            st.bodies.push(ModelBody::new("Part".into(), body.clone(), 1));
+            let on = thread_on(&st, 1, Vec3::new(5.0, 0.0, 14.0), &ask()).unwrap();
+            EMPTY_TRIM.set(fail);
+            let note = cut(&mut st, on, (ThreadTip::None, None, None));
+            EMPTY_TRIM.set(false);
+            (note.unwrap(), kernel::measure(&st.bodies[0].body).unwrap().volume)
+        };
+        let (none, trimmed) = build(false);
+        assert_eq!(none, None);
+        let (note, square) = build(true);
+        assert!(note.is_some_and(|n| n.contains("M10") && n.contains("left uncut")));
+        // The square stop leaves about half a pitch's worth of groove uncut: well over a mm³.
+        assert!(square > trimmed + 1.0, "{square} vs {trimmed}");
+    }
+}
@@ -55,7 +55,8 @@ impl FeatureKind {

    /// The body a feature that works on one body's faces names (shell, draft, split, offset,
    /// delete and replace face, surface offset, the placed plastic features, sheet metal
-    /// conversion, ruled surface, untrim): its face points pick faces of that body.
+    /// conversion, ruled surface, untrim, Split Body's tool face): its face points pick faces of
+    /// that body.
    pub fn face_body(&self) -> Option<&str> {
        match self {
            FeatureKind::Shell { body, .. }
@@ -66,10 +67,11 @@ impl FeatureKind {
            | FeatureKind::ReplaceFace { body, .. }
            | FeatureKind::SurfaceOffset { body, .. }
            | FeatureKind::Boss { body, .. }
+            | FeatureKind::Lip { body, .. }
            | FeatureKind::SnapFit { body, .. }
            | FeatureKind::Rest { body, .. } => body.as_deref(),
            FeatureKind::SheetConvert { body, .. } | FeatureKind::SurfaceRuled { body, .. } => Some(body.as_ref()),
-            FeatureKind::SurfaceUntrim { face, .. } => Some(face.body.as_ref()),
+            FeatureKind::SurfaceUntrim { face, .. } | FeatureKind::Split { tool: Some(face), .. } => Some(face.body.as_ref()),
            _ => None,
        }
    }
@@ -12,6 +12,7 @@ revolve
  moves: axis.dir[0], axis.dir[1], axis.dir[2], axis.origin[0], axis.origin[1], axis.origin[2], to[0], to[1], to[2]
  face points: [3, 3.5, 3.25]
  profiles: 1 all
+  placement: 9, 9.5, 9.25
 fillet_constant
  moves: edges[0][0], edges[0][1], edges[0][2]
 fillet_chord
@@ -86,6 +87,7 @@ construction_plane
  moves: plane.axis_dir[0], plane.axis_dir[1], plane.axis_origin[0], plane.axis_origin[1], plane.axis_origin[2]
 split
  moves: plane.axis_dir[0], plane.axis_dir[1], plane.axis_origin[0], plane.axis_origin[1], plane.axis_origin[2], tool.point[0], tool.point[1], tool.point[2]
+  face points: [0, 0, 0]
 split_line
  moves: plane.axis_dir[0], plane.axis_dir[1], plane.axis_origin[0], plane.axis_origin[1], plane.axis_origin[2]
 construction_axis
@@ -148,6 +150,7 @@ boss
  face points: [0, 0, 0]
 lip
  moves: face[0], face[1], face[2]
+  face points: [0, 0, 0]
 snap_fit
  moves: direction[0], direction[2], hook[0], hook[1], position[0], position[1], position[2]
  face points: [0, 0, 0]
@@ -166,6 +169,7 @@ surface_extrude
  face points: [1, 1.5, 1.25], [2, 2.5, 2.25]
 surface_revolve
  moves: axis.dir[0], axis.dir[1], axis.dir[2], axis.origin[0], axis.origin[1], axis.origin[2]
+  placement: 9, 9.5, 9.25
 surface_sweep
 surface_sweep_options
 surface_loft
@@ -0,0 +1,4 @@
+//! A counterbore hole may save a `bridge` length: two printing layers that thick below the
+//! counterbore's floor (a slot as wide as the hole along X, then a square) so a 3D printer bridges
+//! the step. An older design has none and keeps a plain counterbore. The last release refuses a
+//! design that has it (it asks for an update) instead of opening it without the bridge layers.
@@ -0,0 +1,3 @@
+//! Saves exact encoded texture bytes, inert provenance and explicit saved surface roles.
+//! Older designs have no embedded textures and retain their built-in surface bindings.
+//! The last release asks for an update instead of silently dropping the new resources.
@@ -0,0 +1,5 @@
+//! A fillet saves `turn: "swept"` when two of its rounds that turn round a sharp side edge (the
+//! rounds along a boss's base, at its upright edges) are swept round that edge, their corner an
+//! exact torus; absent, the default `mitre`, they meet in a mitre, as designs before this change were
+//! built. An older design has none and keeps its mitres. The last release refuses a design with
+//! this change (the newer format number).
@@ -0,0 +1,12 @@
+//! Nothing new is saved for holes, but a hole placed on a face that names the bodies it drills
+//! (`participants`: its `targets`, or the body of another component it was picked on) now finds
+//! the face it starts on among those bodies' faces, where one of them passes through its position
+//! (#12066). Where another body touched that face at the hole, older designs could save a
+//! `direction` taken from the other body's face, pointing out of the drilled body; such a hole cut
+//! only a shallow pocket. It is now mirrored into the drilled body's face when the design is
+//! evaluated, as format 18 does for a direction taken from the far side of a thin plate, and
+//! drills through. Holes whose direction enters one of their own bodies' faces there, holes whose
+//! own bodies have no face at their position (placed on another body's face to drill through it),
+//! holes that name no bodies, and holes at several sketch points (already limited to their bodies,
+//! #2882) build as before. No rewrite is needed. The last release refuses a design with this
+//! change (the newer format number) instead of building the pocket again.
@@ -0,0 +1,5 @@
+//! A sketch's intersection link can save a curve of another sketch as either side (`a` or `b`,
+//! `{"type": "sketch_curve", sketch, curve}`), standing in for that curve's extrusion along its
+//! sketch's normal (#11048). An older design has only bodies and faces there, and opens as before.
+//! The last release refuses a design that has one (it asks for an update) instead of opening the
+//! link as lost.
@@ -0,0 +1,6 @@
+//! A point cloud keeps the segments and triangles its file draws over its points (#8817):
+//! `segments` and `triangles` in its `complex`, the indices of their points, and a column of named
+//! numbers may lie on them (`on`: `segment` or `triangle`; a column that does not say is on the
+//! points, as every design saved before this has it). Older designs need no transformation: their
+//! clouds are points alone. The last release refuses a design saved with this (the newer format
+//! number) instead of opening its clouds as loose points without their edges and faces.
@@ -0,0 +1,5 @@
+//! A revolve's explicit axis `{origin, dir}` can save its origin's coordinates as length
+//! expressions (`["W / 2", 0, "groove_floor"]`) so the axis follows the parameters; a plain number
+//! stays a number. An older design has numbers only and reads as before. The last release refuses
+//! a design with this change and asks for an update, instead of opening it and reading an
+//! expression as the origin.
@@ -0,0 +1,6 @@
+//! A new-body extrusion or revolve whose outputs transfer into its source sketch's component
+//! reads the profile through the recorded transfer frame. Capturing that component's position
+//! therefore moves the body once, as the pending preview does. Existing designs use their
+//! saved transfer transforms without rewriting fields; independent cross-component references
+//! keep their live placement. The last release refuses the newer design-format number rather
+//! than reopening the design with the former double-placement behavior.
@@ -77,6 +77,7 @@ pub mod render_optics;
 pub mod render_resources;
 pub mod render_settings;
 pub mod render_surface;
+pub mod render_texture_resources;
 pub mod sheet;
 pub mod sketch_equation;
 pub mod text_params;
@@ -92,8 +93,8 @@ pub use eval::{
    blend_target, curve_pick_error, draft_corner_options, edge_names_for, edge_refs, face_point_names, face_point_state, hole_direction_at,
    hole_on_surface, import_body_names, join_pieces_added, map_wire, metric_thread_sizes, object_height, parse_metric_thread, pattern_matrices,
    revolve_extent, revolve_extent_for_handle, revolve_extent_with_convention, select_profiles, sketch_hole_direction, sketch_line_plane,
-    state_in_frame, state_in_frame_at, suggested_thread, suggested_thread_in, tangent_face_chain, through_all_distance, world_state,
-    world_state_reusing,
+    state_in_frame, state_in_frame_at, suggested_thread, suggested_thread_in, tangent_face_chain, through_all_distance, with_placed_copies,
+    world_state, world_state_reusing,
 };
 pub use eval::{EvalCache, KeptResults};
 pub use expr::Expr;
@@ -757,10 +757,19 @@ pub(crate) fn order_lumps(bodies: &mut [crate::ModelBody], origin: &Arc<crate::n
        // cut body's own feature's and the rest are the cut's, and `body.rename` stores a name in
        // the `body_names` of the feature a body says made it (#10438).
        let names: Vec<(String, u64)> = members.iter().filter_map(|i| bodies.get(*i).map(|b| (b.name.clone(), b.feature))).collect();
-        for ((name, feature), (_, i)) in names.into_iter().zip(keys) {
-            if let Some(b) = bodies.get_mut(i) {
-                b.name = name;
-                b.feature = feature;
+        // The pieces take the family's places in that order too, so the state lists them as
+        // their names run. The session pins a feature's body names in state order, and the next
+        // evaluation hands them out in this order: listed in the kernel's order, the pieces
+        // swapped names once the design was evaluated again from its pinned names (opened).
+        let moved: Vec<crate::ModelBody> = keys.iter().filter_map(|(_, i)| bodies.get(*i).cloned()).collect();
+        if moved.len() != members.len() || names.len() != members.len() {
+            continue;
+        }
+        for ((mut b, (name, feature)), place) in moved.into_iter().zip(names).zip(&members) {
+            b.name = name;
+            b.feature = feature;
+            if let Some(slot) = bodies.get_mut(*place) {
+                *slot = b;
            }
        }
    }
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				<svg xmlns="http://www.w3.org/2000/svg" viewBox="116.406 53.364 2748.71 904.436" width="2749" height="904" role="img"><title>SolidCraft</title><defs><linearGradient id="sc1" x1="619.14" y1="179.734" x2="694.687" y2="396.761" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#1d63c6"/><stop offset="1" stop-color="#15499e"/></linearGradient><linearGradient id="sc2" x1="619.14" y1="413.244" x2="790.839" y2="605.547" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#459fff"/><stop offset="1" stop-color="#2379e7"/></linearGradient><linearGradient id="sc3" x1="632.876" y1="399.508" x2="783.971" y2="968.175" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#1b66cf"/><stop offset="1" stop-color="#124596"/></linearGradient><linearGradient id="sc4" x1="207.063" y1="303.357" x2="426.837" y2="968.175" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#258df5"/><stop offset="1" stop-color="#1461da"/></linearGradient><linearGradient id="sc5" x1="385.63" y1="53.364" x2="522.989" y2="510.769" gradientUnits="userSpaceOnUse"><stop offset="0" stop-color="#51adff"/><stop offset="1" stop-color="#2b83f1"/></linearGradient></defs><g><path d="M547.883 282.66 L709.797 188.211 L709.797 375.985 Z" fill="url(#sc1)"/><path d="M727.797 593.626 L727.797 407.136 L889.571 500.381 Z" fill="url(#sc2)"/><path d="M530 521.17 L691.797 427.912 L691.797 655.928 L907.594 531.545 L907.594 740.159 L530 957.8 Z" fill="url(#sc3)"/><path d="M116.406 510.769 L116.406 303.529 L494 521.17 L494 957.8 L314.203 854.167 L314.203 624.777 Z" fill="url(#sc4)"/><path d="M134.374 272.334 L512 53.364 L691.828 157.015 L476.117 282.846 L673.752 396.761 L512 489.993 Z" fill="url(#sc5)"/></g><path fill="#15499e" transform="translate(1092.78 632.20) scale(0.36281)" d="M303 12Q212 12 147.5 -20Q83 -52 38 -101L138 -202Q173 -162 217.5 -142Q262 -122 313 -122Q369 -122 396 -145Q423 -168 423 -206Q423 -225 416.5 -240.5Q410 -256 392.5 -266.5Q375 -277 342 -281L273 -290Q200 -300 152.5 -326.5Q105 -353 82 -396.5Q59 -440 59 -498Q59 -561 90.5 -608.5Q122 -656 180.5 -683Q239 -710 321 -710Q400 -710 460 -684.5Q520 -659 563 -612L462 -510Q437 -539 401.5 -557.5Q366 -576 312 -576Q261 -576 236 -558Q211 -540 211 -508Q211 -484 219.5 -469Q228 -454 246.5 -446Q265 -438 294 -433L363 -422Q435 -411 482 -385Q529 -359 552 -317Q575 -275 575 -215Q575 -148 543.5 -97Q512 -46 451 -17Q390 12 303 12ZM926 12Q849 12 794 -21.5Q739 -55 709.5 -117Q680 -179 680 -263Q680 -348 709.5 -409Q739 -470 794 -503.5Q849 -537 926 -537Q1003 -537 1058 -503.5Q1113 -470 1142.5 -409Q1172 -348 1172 -263Q1172 -179 1142.5 -117Q1113 -55 1058 -21.5Q1003 12 926 12ZM926 -105Q970 -105 994 -132.5Q1018 -160 1018 -209V-316Q1018 -366 994 -393Q970 -420 926 -420Q883 -420 858.5 -393Q834 -366 834 -316V-209Q834 -160 858.5 -132.5Q883 -105 926 -105ZM1511 0H1444Q1368 0 1332.5 -37Q1297 -74 1297 -144V-740H1445V-115H1511ZM1694 -581Q1649 -581 1628.5 -602Q1608 -623 1608 -654V-676Q1608 -708 1628.5 -728.5Q1649 -749 1694 -749Q1739 -749 1759.5 -728.5Q1780 -708 1780 -676V-654Q1780 -623 1759.5 -602Q1739 -581 1694 -581ZM1620 0V-525H1768V0ZM2248 0V-88H2243Q2232 -45 2192.5 -16.5Q2153 12 2102 12Q2036 12 1991 -19.5Q1946 -51 1923 -112.5Q1900 -174 1900 -263Q1900 -352 1923 -413Q1946 -474 1991 -505.5Q2036 -537 2102 -537Q2153 -537 2192.5 -509Q2232 -481 2243 -437H2248V-740H2396V0ZM2151 -108Q2179 -108 2201 -117Q2223 -126 2235.5 -143.5Q2248 -161 2248 -185V-340Q2248 -364 2235.5 -381.5Q2223 -399 2201 -408Q2179 -417 2151 -417Q2109 -417 2081.5 -387.5Q2054 -358 2054 -308V-217Q2054 -168 2081.5 -138Q2109 -108 2151 -108ZM2844 12Q2750 12 2680.5 -28Q2611 -68 2573 -147Q2535 -226 2535 -344Q2535 -462 2573 -543.5Q2611 -625 2680.5 -667.5Q2750 -710 2844 -710Q2940 -710 3003.5 -670Q3067 -630 3105 -546L2974 -478Q2961 -522 2930.5 -548.5Q2900 -575 2844 -575Q2777 -575 2736.5 -531.5Q2696 -488 2696 -405V-293Q2696 -211 2736.5 -167Q2777 -123 2844 -123Q2900 -123 2933.5 -153.5Q2967 -184 2983 -227L3107 -155Q3068 -76 3004 -32Q2940 12 2844 12ZM3373 0H3225V-525H3373V-411H3378Q3384 -440 3400 -466Q3416 -492 3443.5 -508.5Q3471 -525 3512 -525H3538V-387H3501Q3458 -387 3429.5 -379.5Q3401 -372 3387 -355Q3373 -338 3373 -307ZM4105 0H4023Q3996 0 3972.5 -13.5Q3949 -27 3935 -53.5Q3921 -80 3921 -117V-130L3953 -92H3917Q3905 -41 3864 -14.5Q3823 12 3763 12Q3684 12 3642 -30.5Q3600 -73 3600 -141Q3600 -197 3627.5 -233Q3655 -269 3705.5 -287Q3756 -305 3825 -305H3908V-338Q3908 -376 3888 -398.5Q3868 -421 3821 -421Q3777 -421 3751 -402Q3725 -383 3708 -359L3620 -437Q3652 -484 3701 -510.5Q3750 -537 3832 -537Q3943 -537 3999.5 -487.5Q4056 -438 4056 -345V-115H4105ZM3908 -221H3836Q3793 -221 3771 -206Q3749 -191 3749 -162V-147Q3749 -119 3767 -105Q3785 -91 3818 -91Q3843 -91 3863 -98Q3883 -105 3895.5 -120Q3908 -135 3908 -159ZM4250 0V-410H4176V-525H4250V-587Q4250 -663 4290.5 -701.5Q4331 -740 4407 -740H4503V-625H4398V-525H4503V-410H4398V0ZM4877 0H4789Q4713 0 4673 -39Q4633 -78 4633 -153V-410H4559V-525H4596Q4626 -525 4637 -539.5Q4648 -554 4648 -581V-667H4781V-525H4885V-410H4781V-115H4877Z"/></svg>