The packaging action can't read a hyphenated version from the tarball's name, so the job gives it a name without the hyphen and renames the package back. A hyphenated version no longer fails the build if its Arch job fails; a plain version still does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bumps the version to 0.40.0-rc.1 and folds the pending format changes into format 49. The default-layout header test now expects the room the version really takes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
06-threads/018-external-m10-both-hands makes 606 edges and 404 vertices (486 and 324 before),
with the same 204 faces, area and volume (to 1e-11), in two runs on the box; every other ladder
case is as the golden records it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Five tests fail at the new pin and are listed with their causes: the variable round along a box
edge (status 1001, twice), the shell of a fully rounded box past its rounds' radius
(SM_ERR_INVALID_INPUT), the chamfer that would grow the part (no face instead of the
too-large refusal) and the box-edge round's wire record. The tabbed plate's outer loop with a
partial selection passes and leaves the list; issue2422's vertical edge now fails as a smooth
edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright build (9524.3437, 10 faces,
solidcore#2431); 5158-fillet-round-just-past-a-10mm-face, the curvature pipe on a plate's
order-2 section, the concave-arc and front-top rounds (r5, r7 and default) and the peg's front
and concave rounds and chamfers build and pass their checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The rim alone was pinned to 7.958674274526857, the marched end rib's value; its closed form,
the spandrel (1 - pi/4) r^2 revolved about the disc's axis outside |x| < 4, is
7.958672911836132, which the rim's End (fillet_blend_corner) builds to 5e-8. With the corner
arc's Pappus volume the two take off 8.117808752; solidcore 8ddce9016 removes 8.117808800.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 (pinned) the r2, r2, r3 corner at (20, 0, 20) is one patch: 10 faces,
7928.743041456134 mm³, the r3 round and the patch the second fillet's. The test is pinned to
that and leaves the known-failing list. The fork's setback corner (15 faces, 7928.142563938)
waits for solidcore#2310; solidcore#2382, not merged, moves the case to 7927.724282512234.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
smlib's run() catches a solidcore panic and replaces the kernel (kept: the app does not die
natively), returning Error::Internal; the kernel turned it into KernelError::Failed and the
engine into Other, so hostile_params_never_panic and the fuzzer no longer saw kernel panics.
Now the kernel's wrapper errors go through KernelError::smlib, which keeps Internal; a body the
wrapper could not take because of a panic is Internal too. A feature whose evaluation hit it
records the result as internal (not cached: the kernel was replaced), and the command that
made it, or any command whose kernel call returns it, fails with EngineError::Internal under
its own id. Crash reports mark a panic inside a solidcore call recovered (kernel::guarded), and
the crash test's kernel mode panics inside a solidcore call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The kernel crash test's command must fail with EngineError::Internal naming
diagnostics.crash_test, as a panic in the command itself does: the panic detectors
(hostile_params_never_panic, the fuzzer) look for Internal. Today it is EngineError::Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
solidcore's algorithms recurse (subdivision, intersection, filleting) and its README asks for
8 MiB, a native main thread's stack; Rust starts other threads with 2 MiB, and only the web
build set more. kernel::KERNEL_STACK is 8 MiB and kernel::kernel_thread a thread builder with it.
The kernel's parallel map runs on a pool of its own with that stack (on a worker of a pool
already, as in map_with_local_pools, it stays on that pool as before), the one-thread mesh pools
and map_on_threads' helpers have it, and so do the engine's interference worker and the
evaluator's plan-mesh thread. A test recurses 5 MiB deep on each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
While a dump folder was set, every call serialised each input body before it ran, so the rig's
timings (taken with a folder set) measured the serialiser as much as the kernel. The callers now
hand run_on the bodies the call reads; they keep them until its result is known, and only a
failing call serialises them, into the folder as before. A test counts the serialisations: an
answered volume and union none, a failing call one per input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The check had become one-sided after the C++ kernel's removal: a case that started passing,
or a change in the count, went unnoticed. As on main, a case that now passes fails the test
until it is added to the list, one that no longer passes is a regression, and the count is 111.
At solidcore 8ddce9016 solidcore passes exactly the 111.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The workflow triggers on the root Cargo.toml and Cargo.lock, and the plan gets their diff
(--pin-diff): a changed line that names solidcore's repository (Cargo.toml's git rev, Cargo.lock's
source) selects every area and the ladder. A path filter cannot tell a pin from another
dependency's change, so the plan reads the lines; another dependency's change runs no area.
The fillet rig is not triggered: the kernel rig's fillets shard runs the same cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A solidcore bump changes only the root Cargo.toml and Cargo.lock, which neither PATHS-ALL nor
the workflow's trigger paths list, so it ran no rig. The tests want a change to the solidcore
lines of those files to run everything, another dependency's change in them to run nothing, and
the workflow to trigger on both files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A shell, offset or thicken solidcore's one construction refuses because a face's offset folds
(SolidError::ShellRefused, ShellRefusal::Fold) is Error::WallFolds with the largest wall it
names; the kernel says "the wall is thicker than a face curves, so the face's offset would
fold; the largest wall that works is 10 mm". A blend too large carries solidcore's NoRoomReason
as Error::TooLarge's RoomReason, worded in its message before the largest size that fits:
a collapsed offset (solidcore#2431) says the ball is as wide as the face it rolls on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A thicken of solidcore#2350's parabolic sheet past its apex's radius of curvature is refused
by solidcore's one construction (ShellRefused, Fold, naming 10); the wrapper passed it on as
"solidcore: ..." with no words of its own. A round at the radius of the round it rolls on
beside the 851 part's arc wall is refused as a collapsed offset (NoRoomReason::OffsetCollapses,
solidcore#2431); the message named the size but not why. Both fail until the reasons are
carried through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 three equal convex rounds at a vertex of three planes are the blend
corner's Ball (fillet_blend_corner). The wrapper set a setback on the corner after the corners
were made, so a set-back vertex was already a Ball (NByTwo) and its setback was refused
(CornerRefused): a_setback_corner_left_open_returns_its_hole (both) and setback_corner's
closed form. solidcore's AddSetBackVertex, called before the corners are made as the fork's capi
round_edges does, keeps a set-back vertex out of the Ball, and its corner is set back.
The corner a setback is set on may also be a blend corner whose event is the Setback, as the
capi takes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 a Ball corner is a BallPatch (fillet_blend_corner) and a round between
NURBS faces a ProceduralBlend (fillet_round_as_definition). The arrays' B-spline part of a face
had neither, so their export fell to the approximation and failed ("an approximated face surface
that is not a B-spline"): the rounded cube, the variable and curvature rounds and the
all-edges box in the smlib tests, and the Ball-corner and round cases of the rig.
Both are their nets, exactly. A ball patch also goes out as SURFACE_BALL_PATCH, its sphere's
centre and radius in FACE_DEFINITION_REALS, as the record's BallPatch reads it, and comes back
as solidcore's BallPatch on that net: the rounded cube's eight corners stay on their spheres
through the record and back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
solidcore main at 8ddce9016 adds cone_unbounded_parameterized_as_nurb,
ellipse_open_arc_keeps_end_angle (solidcore#2422), fillet_round_as_definition,
fillet_round_on_round_as_definition, fillet_overflow_crease_along_edge,
plane_first_torus_section_exact, keep_exact_pcurves and shell_one_construction
(solidcore#2367), and drops fillet_extended_rail_end_at_side_edge_crossing.
Every one is on. fillet_keep_features is no longer held back: solidcore#2374
fixes the round beside a boss it refused (solidcore#2370).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A block's front top edge rounded r 3 beside a boss joined on its top fails SM_ERR_INVALID_INPUT
with it on; off it builds the closed form, 6099.225530 mm³, as the C++ fork does. Found by
ui-egui's opening_a_large_design_never_stalls_the_window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
solidcore's fit is the largest size less a margin (34.99 where the L bracket's bend builds 35,
4.29 where #3435's ring builds 4.3), so the feature's search keeps naming the size, and solidcore's
is the answer only where the search finds none. The refusal keeps its words, "larger than the
faces beside its edges allow", with the edge after them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
solidcore sizes a blend it refuses as too large (the session's fit, SolidError::FilletRefused under
fillet_gn_section_generator). The smlib crate gives it as Error::TooLarge with the size, what it
sizes and a point halfway along its edge (an equal chamfer's ball radius turned back into its
distance); the kernel words it as the fillet feature's search does (largest_fit_note), and the
feature runs no search when the refusal names it. The 3x2 mixed corner whose rails cross, which
solidcore refuses (fillet_refuse_mixed_corner_crossing_rails), is not supported yet, citing
solidcore#2256.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
With it on, 11 rig cases that pass with it off are refused as breaking through the part, and
190-fillet-disc-rim-past-its-2mm-wall fails status 1001. A fix under the same flag is in progress
on solidcore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
Main took #11351 as one squashed commit (ea772a043). This merge records its history as 509
wave commits: a wave ends at every SMLib pin and holds at most 4 commits or about 800 changed
lines. Each wave lists the commits it holds; the originals stay reachable from tag
archive/merge-main-develop. Main's files are kept as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360).
- b2fd08e85 jyviko: Profiler: no smlib category left in its tests and help
- d49a7eac0 jyviko: Known-failing tests: the convex chamfer that would grow the part passes
- d55fedd56 jyviko: smlib export test: a rounded cube's corners checked on solidcore's spheres
- 017a2a607 jyviko: Known-failing tests: the fillet into an earlier round passes on solidcore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* UI: rim and wall picking tests for a circle of arcs that is one wall
A circle drawn as two half arcs now extrudes to one full-turn wall with its
seam edge, and each rim is one closed edge (tangency-labs/smlib#67). The tests
keep their intent on that body: a rim clicked once is one item, measured and
highlighted whole and picked from either side; a wall picked either side of
its seam is the same surface, lit whole, and toggles off from the other side;
every face is its own patch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillets: a later round at a corner where earlier rounds meet blends them again with it
The owner's ruling of 2026-10-30: a later fillet on an edge at a vertex where earlier
rounds already meet in a mitre makes the corner rounding all of them at once makes, one
smooth patch, the mitre gone. A body made by constant-radius rounds keeps what they were
made on and which edges they rounded at which radius; a later round reaching such a corner
blends the earlier rounds' edges (from the earliest of those meeting there on) with the new
edges in one SMLib blend of the body before them. The result's history is put over the body
the later round was given: an earlier round's face is that face trimmed anew (its name
kept), the corner patch and the new rounds are the later fillet's. A picked mitre seam has
no round of its own: it is refused unless a new edge of its radius meets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Two box edges rounded r2 in one fillet, then the upright edge at their mitre r3 in a second
fillet (tangent chain on, so the seam comes with it): 10 faces, 7928.743041 mm³ as
fillet_radii of the box gives, the r2 rounds' names kept, the r3 round and the corner patch
the second fillet's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: a body's record of rounds goes with its history, and can be read back
The rounds that made a body are over the body its history is over: a new history (an
operation carrying a step's result back to its own operands) leaves the record out, so a
later round never reads one history against another body. Body::rounds gives the record and
Body::with_rounds_of takes one back, checked (edges of the body before them, a fillet's
radii, the body's history over that body), for a saved model to keep it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure
with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574
against strips 7881.678). That body is the strips' outside the block its patch lies in: its
rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails
where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at
most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is
that block; the upper one, at most the strips' volume, stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one
without it is refused ("saved model: rounds"), as is a model without any of its other lists:
the states, the preview and the thinned model all came back empty. The io tests' saved_model
and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part
stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made
by rounds: the list is empty, and every expectation stays as it was.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70)
Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point
classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's
knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles.
Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one.
The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing
changed), so the binding expects 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a strip's tangent and curvature run-offs are the distance long across the surface
SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects
CreateExtendedSurface until the parameter line through the side's middle is that long), so each
run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for
both. The parabola-length formula (418.18) was truck's.
Ruling d2 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: one smooth angle, and a round too small to change the part is refused
The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value
for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about
r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which
answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds,
tolerance / (sec(d/2) - 1). d is the least turn along the edge
(tangent_edge::least_angle_along, at tangent_all_along's stations).
Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest
radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth
(SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
smlib_chamfer turns the distance into a ball radius d sqrt((1 - c)/(1 + c)), c the faces'
binormals' dot (capi chamfer_radius); at #851's cusp the binormals agree, the radius is 0 and
the call is SM_ERR_INVALID_INPUT before the fillet executive runs (gdb: chamfer_edges sees
radius 0; the dump's why is empty). SolidCraft hands every chamfer to SMLib, so the
ball-contact chord (the ball of radius d: 3.822 wide at d = 2, 159.2365 removed) is SMLib's to
build.
Ruling d4 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the
corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib
fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is
ignored until it builds. It replaces the refusal test that expected TooLarge.
Ruling d8 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20
(the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the
The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner
cases the same SMLib (replay/1.0.1 and those commits) builds come off too.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow
their faces first and then what is left of the others; smlib_blend_dropping says which picks'
edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel
returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at
(0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on
its bottom front edge with the front left upright: the block is R21's alone, in closed form).
Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer
ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form,
where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the
known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife edge's 0.5 chamfer builds
SMLib's trim took a fillet meeting its face at more than 78 degrees for one with no side
(smlib-batch-4-rulings 971e567); the chord of the knife edge's 0.5 chamfer meets the flat face at
81 degrees. The case comes off the known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its
loop's normal, summed from the cross products of its chords, pointed down;
fixed in SMLib). With the fix every letter grows, and the join builds at 3°
and 15° by the Round rule and by the default rule (tangent for spline
outlines), where before 15° was expected to be refused.
Exact where the outline derives it: a letter's section at height z is its
outline offset by e = z tan a, by the Round rule of area A + P e + C e² while
the offset trims nothing (Steiner; C half each loop's turning less
tan(t/2) - t/2 at each reflex corner), so the letter is
A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o
at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its
mass properties integrate to 1e-8). The concave joins of r, n, g and e are
tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the
formula), the t's by 15° (9.9e-5 over), and on the block the letters grow
into each other, so the whole word is checked for what holds exactly: one
closed body with the block, and half-way up every point of each straight
letter's outline inside the solid (the t drafted inward failed that).
With SMLib's fix (smlib-batch-4-text-loops 82133b2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges asked G1 at every blend seam. Its front wall
leans 19 over 20 and the others 10 over 20, so at each rim corner the two mitred rounds meet the
sloped corner edge at different heights (0.155625 and 0.276393 below the top): the deeper round
runs on past the corner edge and is cut by the plane of the other's wall, a crease by
construction, the gap below the shallower round filled on that plane. The check now measures
the rounds' contact seams, on the top and on each wall, where the rounds are tangent. The
volume is unchanged.
With SMLib smlib-batch-4-mitre (1c15364): the case passes (V 144530.427946 against
144530.427909, 15 faces, sound); before it, only the four corner creases failed the check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* smlib: Brep::classify_point says exactly where a point lies against a body
Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone
tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a
vertex. A box and a cylinder just off its curved wall in measure's tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::classify_point decides inside, outside or on the boundary exactly
SMLib's point classification at the body's own tolerance, on the exact faces and edges, in
place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point
within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh
body's triangles are its exact shape: on them within the record's tolerance, else by ray
crossings. The kernel's own probes move to it; Body::contains goes once its last callers have.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* doc: a hole decides whether it exits at its drill point's shoulder exactly
Material past the depth needs a body with the point inside, air before it needs every body to
have it outside; a point within a body's tolerance of the exit face is neither.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* engine tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* ui, cli tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::contains, the mesh test, is gone
Every caller asks Body::classify_point now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds
waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it,
SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64
Linux and are no longer ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
The gate on aarch64 Linux reports 16 fillet cases FIXED with the pinned SMLib: the sloped and
equal-slope basin rim chamfers and rounds past their rims (1080-*, 5835-*), the pocket rim
chamfer past the floor, and the three pocket rim rounds now mitred at the pocket's corners
(every-pocket-*). No other area's gate reports a case fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: the re-blend's removed picks formatted as rustfmt lays them out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: blend_smlib laid out by the 2024 edition's rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet: the radius-too-large choice in plain nouns
"If too large: Stop and say so / Largest that fits / Narrow where needed"
becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in
every language of the catalog, with the error and the tip that name them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: a round that would cut through its wall into a hollow is refused
The owner's rule of 2026-10-30: a round running past a rim of its faces
into open air builds; one whose section would remove material through to
a hollow behind its edge (a slit into the hollow, a cut through the part)
is refused as too large, so the fillet names the largest radius that fits.
Decided exactly in the section of a straight convex edge between planar
faces: the round's centre is at depth r below both planes, and it opens
where its arc uncovers a boundary point strictly inside the wedge with no
material beyond it toward the centre (the body's exact point
classification). Looked at: straight edges parallel to the round's (a
hollow's corner), cylinders about parallel axes (a rounded corner), and a
picked concave parallel edge's own round, which fills the corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
The round's centre (32 - r, 42 - r) leaves the hollow's corner (30, 40)
outside its circle, opening the wall, where sqrt2 (r - 2) = r: the case
expects the refusal naming 6.828. 2852's R30, refused naming 25.24, now
passes too: both come off the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
`cargo xtask known-failing --junit PATH` reads nextest's junit (a file, or every .xml under a
directory, so all of a run's junit artifacts at once) and fails on a test that failed and the
list does not name, and on a listed test that passed (FIXED: take its line off, as the kernel
rig's gate does). A listed test that did not run is neither, since a pull request tests only the
packages it touches. The list has the rig's KNOWN_FAILING format (`<test> <cause>`, sorted, the
rig's own parser), with `<test>` nextest's `<binary id>::<test name>`; `cargo xtask lists`
checks it is sorted. The list starts empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
Native Linux tests and the GPU path test shards no longer fail on any failed test: nextest's
"tests failed" exit (100) goes to `cargo xtask known-failing --junit`, which fails on a failure
the list does not name and on a listed test that passes. Any other nextest exit (a build error,
a bad filter) still fails the step at once. The tests skill says to list a failing test with its
cause, in place of ignoring it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the known-failing list takes develop's 10 failing tests
Develop 38fd4a4f6 (CI run 41157648345, after the SMLib eaa998a pin) fails 10 cargo tests; each
is listed with the cause its failure message gives. Seven are SMLib refusals or results off
their derived volumes (fillet, chamfer and shell), the cli action matrix and naming corpus
among them; the two corner_g2 tests are the fitted G2 corner patch bulging past the box, which
the explicit G2 corner fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
Develop 38fd4a4f6's Reference tests fail 34, 35, 77, 78 and 81 (STEP export finds fillet edges
4.6e-5 to 6.1e-5 off their surfaces against 2e-5), 37 (the apex blend 0.193 off), 80 (the
taper-to-fit area) and 83 (thicken status 1001). Each expected.json names its cause in
known_failure, which the oracle already reads: a known failure that passes fails the job.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sweep path: a curve of several pieces is turned round whole
The path chain oriented its first piece, not its first curve: a first curve
of several exact pieces (a fit spline, an ellipse, a projected free-form
edge) was never turned round, so a path whose next curve meets it at its
start was refused as "not connected end to end". The chain now orients
curve by curve: the first runs toward the second where they meet at one
end only (else from the end nearest the profile), each next one starts
where the previous ended, with one joint tolerance for both questions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 2fc375f (tangency-labs/smlib#71, #72, #73)
A sheet's side is extended exactly the distance asked, or the call says it cannot (#71);
NVIDIA's -Werror build passes again (#72); a body splits by a sheet of several faces as it
is, smlib_split_body_by_sheet (#73). The C API is ABI 6 (the new entry), so the binding
expects 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Extend grows a surface of several faces face by face
A surface body of more than one face (a fit-point spline's spans extruded, #3830) was refused.
Each face with a picked edge is now extended alone by SMLib's extension of its surface, and the
faces are sewn back together, each the face it was. A side that lengthens onto a face meeting it
tangent takes that face along, past its edge continuing the picked one; across a crease the
neighbour grows only when its edge is picked too, otherwise the extension is refused. Faces whose
lengthened sides no longer meet are refused. Up to a target keeps the pieces every grown face
lies in.
3830's extensions now build; its split still fails (the tool point picks one span, and a face
tool cuts with that face's surface alone), so it stays on the list with that reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
A face tool cut with that face's surface alone, so a face of a surface body made of spans joined
tangent (a fit-point spline extruded, #3830) cut nothing where its span ends inside the body.
Split Body by a face of a surface body now takes the faces joined to it tangentially (the exact
check Extend uses, within the one angle for smooth) and slices with them as they are, through
SMLib's slice by a sheet (smlib_split_body_by_sheet, tangency-labs/smlib 7a01f1b), its sides those
of the picked face. A sheet that only nicks the body cuts nothing, as before; a lone face, or a
face of a solid, still cuts with its surface extended.
3830 comes off the booleans list. Its answer counted the two halves of the cup and not the surface
that cut it, which stays as a body of its own (4879 removes its surface for that reason): three
bodies, the volume unchanged.
Needs SMLib 7a01f1b pinned (SMLIB_REV, prebuilt; its SMLIB_ABI_VERSION 6, which crates/smlib now expects) to link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
The tangent and curvature run-offs of the quarter cylinder r 10 strip, 5 across the surface,
are its section swept 20 along z: exactly 10 pi/2 20 + 5 x 20 = 414.159265. measure is SMLib's
integration on the exact surface (1e-8), not a mesh, so the run-off check is 1e-6 relative and
the 'measured on meshes' notes go. Red until SMLib's extension is solved to its distance
(smlib-extend-converges 590d8a1): eaa998a's curvature run-off is 4.986 long, area 413.882.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a control spline can carry its own knots and weights
A sketch spline over control points was always the clamped uniform B-spline
over them, so a free-form edge whose knots are not evenly spaced (or whose
weights are not 1) could only come into a sketch as one curve per Bezier
span. A control spline now may save `nurbs`: its clamped knots and its
weights. Its points, polyline, exact pieces (one a knot span; conics for a
rational quadratic), the solver's distance and curvature, links, parallel
re-projection and inspect.sketch all read them; a loaded design's are
checked. One pending format file (spline-knots).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch projection: a free-form edge comes in as the one exact spline it is
A projected spline edge of several Bezier spans came into the sketch as one
curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path
naming the corner named one span of it (#3604). The kernel now reads such an
edge (a spline, or an elliptical arc of several spans) as the one clamped
B-spline it is over the edge's interval, its knots and weights its own, and
the sketch takes it as one control spline whose ends sit on the edge's
vertices. Planar regions still read edges span by span. The 3604 case builds
with its original path and leaves KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
The owner's ruling: a round or chamfer that runs past an outer edge of its face into open air
builds, tangent where it has room and cut by the face beyond where it runs out. SMLib's branch
smlib-blends-past-rims builds them by the rig's analytic answers. Off the known-failing list:
the disc's rim past its 2 mm wall (190), the hole's top rim R12 past the plate's bottom, the
chamfer past the cylinder's bottom (2893), each closing on the wall continued as itself, and
926's chamfer ending on the boss's wall, which now builds to its answer too.
The sloped basins' R4 rim rounds (1080, mitred rounds built together where one overflows) build
to their analytic volumes (to 6e-9), and stay listed with that reason: their continuity check
(g1 at every blend seam) takes in the mitres' creases, G0 by the mitre ruling.
2893-chamfer-two-distances-elliptical-rim is graded as a solid (the owner: it builds) and stays
listed, waiting on the ruling on unequal chamfers along a rim whose angle varies.
5158-fillet-round-just-past-a-10mm-face stays listed with its cause found: the round passes
5e-6 under the box's top back edge, inside the body's tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: test that a round of a round's end has no seam with that round's faces
The r1 round of a block's top edge, chained onto the end curve of the r2
round of its arc at a cylinder (rig fillets/every-block-cylinder-crease-
top-edge-after-arc-round-r1), ends where it runs into the cylinder. That
edge is no seam of the r1 round: the cylinder is a face of the r2 round,
not of the r1. blend_seams takes it for one today (the r2 round's name
F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a
contact seam at 60 degrees.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: a blend's seams split its edge's name at the | between its two faces
A blend face's name holds the edge it replaced, <face>|<face>, and a side
of that edge can be a blend face whose own name holds a |. Whether a face
is a contact of the blend was read as the edge's name starting or ending
with the face's name next to a |, so the r2 round's own face F2:side read
as a contact of the r1 round F4:blend:F1:+y|F3:blend:F1:+z|F2:side. The
edge's name is now split into its two faces, a blend side read whole as
the two faces of its own edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: five refused blends build, off the known-failing list
926 (the chamfer ending on the boss's wall), the oblique cut's r0.1
round, the every-block r1 round (its seam with the cylinder is no
contact seam, after the blend_seams fix), the up-down squares' concave
chamfers and the shelled box's lip chamfer build with SMLib branch
smlib-blend-refusals (f8650b8 and later). 1207 r0.5 passes SMLib's check
on its rails now and stays listed for the next cause: its end rib on the
boss, which starts where the round and the boss are tangent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the trough and the pocket whose floors fall to a drain build
SMLib now offsets a vertex where four faces meet (two walls and two facets at the floor's
corners, four facets at the drain) to two vertices joined by a new edge (tangency-labs/smlib
branch smlib-shells). Both volumes match their closed forms. The pocket's lining, hanging from
the top's rim round the pocket, stands apart from the slab's outer walls with the cavity rising
between them to the open top: the case says two shells in the one body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the plate with a hole through its arc side shells open at its far end
SMLib's merge now intersects the offsets of an edge's faces where they could not be mated along
it (the hole's offset poking out through the half-round side's; tangency-labs/solidcore#1795):
one closed valid solid with the one face open, as the owner ruled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the ring cut frame and the up-down join shell
SMLib's inset now keeps only the regions that are cavity, not the one the offsets close where
they overlap (between the two faces of #545's 0.5 floor, round the up-down join's two empty
octants). The frame's core under the recess is hollowed to a sealed void, so the case says two
shells and its closed form, 21044 mm³.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
SMLib keeps the skirt top's offset where its loops wind the other way under the opening, the
cavity's floor (the owner's ruling of 2026-10-31: build it; a lip thinner than the wall is no
break-through).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
The ring cut frame's and the up-down join's shells build now, and so do the up-down join's and
modern-plastic's chamfers (SMLib smlib-blend-refusals). #616's lid in the corpus still fails
SMLib's loop check, the shelled box shelled again at an inner wall is unchanged, and the
oblique cut of a cylinder's fillet still fails SmSurfOfRevolution's Test #7: 3 actions of 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib history test: every operand's order is the identity on its record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: rustfmt the board fixture example and the coplanar asserts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: fillets keeps one case per regime; 17 replications of a case in the same regime go
The sloped-basin chamfers and rounds at 0.5 mm rims repeat the 1 mm rim's regimes; two of the
three knife-edge chamfer tips, the r1 and box r3 curvature corners, the r1 tangent corner, the
1 mm pocket-rim and hole-rim chamfers short of the floor and the r1 together-round each repeat a kept case's regime
and grades. #854 moves to 851-chamfer-arc-top-edge-9-5, and the cases that cited a dropped one
cite the kept one or state its formula.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: five cases outside fillets repeat a kept case's regime and go
A square cut is the slanted plane's ordinary crossing; the cam's half turn is the quarter turn's
contact at a symmetric angle; the r15 slab stands inside the same coincidence tolerance as the r10;
the 90 degree unfold and the 40 degree flange repeat the 72 degree and 20 degree cases' formulas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two G0 window patches graded on the box the part they close keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the cut mirrored loft graded on the box its sections pin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases
wait for the new algorithm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by seams alone runs its loop the other way, never turns over
A loop that uses each of its edges once each way (a whole torus within its tube and ring seams)
is the same set of uses run backwards, so it says nothing of the face's side. One written
clockwise in (u, v) turned the face over, against its same_sense: the torus came in inside out
with a warning. Such a loop is now reversed and the face keeps its side.
Test: seam_only_torus_imports_as_a_whole_ring, both orders of the two seams, volume 2π²Rr².
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by a slit alone is the whole of its closed surface
A loop that runs out along a chain of edges and straight back (a meridian from a sphere's pole
stopping short of the other, out and back) encloses no (u, v) area, yet on a closed surface it
bounds all of it less a cut of none. The reader only read such a face when the slit already ran
pole to pole (and moved the sphere's frame onto it only then), so the 2 mm ball whose meridian
stops at 2.5 rad was refused for its empty loop.
The slit is now made the face's seams, so its loop bounds the surface's whole domain: on a
sphere, a revolution whose profile ends on its axis, or a spline closed round u that collapses
at both ends, the slit's meridian is run on to both poles, out and back (a sphere's frame put
on the slit first, whichever two points it joins); on a torus, the circle the slit lies along is
closed and the other circle through its start is the second seam. The seams on a sphere are its
own meridians (angle 0 on the equator), so their pcurves are exact lines on its form.
Tests: non_antipodal_seam_sphere_imports_as_a_whole_ball passes (its known-failing line goes);
seam_only_torus_imports_as_a_whole_ring adds a torus bounded by a slit along its tube.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues:
the reported part's bar (with the sketch solver's residues) whose sides run tangent into the
cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face
bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight
box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch
stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg corner at r5 and r7
Two more fillet cases, the reported part's concave arc and front top edge rounded together at
r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's
tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the
bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: blends that end where their face runs tangent into another
Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far
end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent
into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top
tangentially there. Each blend ends on a face tangent to the one it rolls on.
- Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at
r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a
semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and
G1 seams, or the analytic volume where the blend has a closed section.
- Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along
x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after
the other (1 then 2).
- STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges
rounded together.
- A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator,
its front edge alone and both edges together.
The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic
cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not
along a seam, so it is not this ending.
On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status
1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5
out of the front face, and the rounds meeting with normals 180 degrees apart where their
contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted
peg (its corner refused as unsupported).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: fillet corners graded curvature-continuous, the default to be
Six fillet cases that pick their edges with no type, so they take the fillet's default, which the
owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as
an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body:
- an oblique convex corner (a block drafted 15 deg);
- a four-edge and a five-edge apex corner (pyramids lofted to a point);
- a pocket's concave corner;
- a mixed corner (a step: one concave edge, two convex);
- a corner beside a cylinder (the top corner of a half cylinder).
All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round,
whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two
rounds at 8.45 degrees (G0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's front chamfer builds
With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge
crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that
carries that fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the curvature-continuous corner cases pick the curvature fillet
The six corner cases added in 3a854104a took the fillet's default type, on the premise that the
default would become curvature-continuous. The default stays the circular round, so each case
now asks for the curvature fillet itself (type curvature: curvature-continuous sections and
corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one
valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*.
The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as
KNOWN_FAILING now says:
- the corner beside a cylinder: the curvature fillet builds its sections only between planar
faces;
- the four- and five-edge apex corners: refused because the default setback is shorter than
where the rounds' contact lines meet (3.90 and 3.51 mm from the apex);
- the mixed corner: SMLib sets back a corner only where its edges are all convex or all
concave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the
concave chamfer's rail on the cylinder ends where it crosses the seam along which the front
face runs tangent into the cylinder, continued past the vertex, and its end rib on the front
face is built from there. report-peg-concave-chamfer-d2 and
report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two
chamfers together still fail, now at the mixed-convexity corner where they meet: its line says
so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168,
kernel lib only its listed failures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: constant rounds of the exact classes, and a tee's round
A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a
cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines
are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2),
(2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on
its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that
SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
The rounds now come as the rational surfaces their classes give, closed ones as two faces split
at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees.
Their KNOWN_FAILING lines go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
Twelve listed cases build on the new blend's end event and exact classes, or were already
built on develop: they come off the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the
round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and
graded on the exact volumes, and come off the shell known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Drawings hidden lines: read develop's B-rep records
Edges come from the record's edge list, cut to their interval (C3::of_edge), and
faces from its face list; a cylinder, cone, sphere or torus chart takes its bounds
from where its NURBS form lies on its label (S3::of_face). A rigidly placed
revolution has main's revolution chart; other placements stay refused. Moving a body
to its centre goes through Brep::moved. Loops are read against the natural normal of
the face's parameters where a chart wraps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden-line fixtures: build develop's records from the fixtures' data
Fixtures keep their bounded curves and surfaces and their own edge numbers; a private
builder makes the canonical record, and the local prepare puts the edges back in the
fixture's numbering. Assertions are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: tests of the bounded edges, face charts and placed revolutions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* drawing-hlr doc: what is drawn and refused on develop's records
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* hlr tests: a placed revolution is refused when its placement is not rigid
The new model has one record for main's Revolution, which was drawn, and its
PlacedRevolution, which was refused. An identity placement is now the former, so
this test's fixture takes a non-rigid one. The refusal it asserts is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
A leader off either surface is refused like a curve with no spline to follow. Tests: a traced rim
drawn on the circle and plane within tolerance, the same leader 1 mm off refused, and kernel bodies
with arcs through the production prepare against closed forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: kernel bodies through the production prepare against closed forms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Tests from main: the world state is a Result here
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A blend's pick measures close edges on their curves, not their polylines
A polyline can be a chord off its edge, more than two edges are apart near a
tangent point. A pick exactly on a ball's rim took the straight edge the rim is
tangent to, and solidcore built a chamfer of that edge with a clean check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
(cherry picked from commit c786db6bf4)
* Merge fixes from the first SMLib test pass
Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step).
A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another
order, and the swap left the name on a piece of the wrong feature.
A replaced analysis keeps its status slot. A command with no world picks does not place the model
first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the
touching key the merge added; only the contracts that read it take it.
Two of main's tests listed as failing on SMLib, with why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Merge fixes from the ui test pass and the gates
Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the
messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's
comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its
tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay
pressed while on. Two of main's ui tests listed as failing on SMLib, with why.
Gates: fixed thread tables become slices, one collapsed if, rustfmt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A silhouette takes its facing from the surface's normals
A flat triangle beside the outline can tip the other way from the surface it approximates, and its
edges joined the outline. On SMLib's sphere that made 192 segments instead of the equator's 64, 100
curves and 95 profiles from the tight fit of #7989. Each corner's normal is used where it is close
to the triangle's own; a mesh without such normals (none, zero, not numbers, or averaged across
creases) keeps the triangle's normal, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Clippy and rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Stepwise open checks every feature under the session's mode
OpenSteps::start evaluated under the default check mode, and finish kept those results under the session's mode: an each_step or off session opened in steps recomputed nothing. start now takes the mode (the app passes its session's), and a mode that changed before finish evaluates the design again under the new one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Clippy without SMLib: the planar-sheet edge reader is built only with it
Its one caller is in the smlib-only sheets module, so without the feature it was dead code and
clippy -D warnings refused the kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
Eight fillet cases for the blend's cross-section by its order of contact with the faces, each
graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next):
- a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the
areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default
thumbweight's definition;
- a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of
the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each
section's added area by Green's theorem along the plate, the section and the pipe's arc; the
order-2 section is built from the faces' feet of the point at distance d from both, which on
the pipe are not linear in d;
- a boss root curvature-rounded 2, the square corner's section revolved (Pappus);
- a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone,
and the volume is the cone's sections integrated along the edge.
Three fail today and are listed: the two curvature rounds whose faces are not a square corner of
planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the
variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib
7ac037e.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two
planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment
about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases
built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket,
every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their
volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x
up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the
distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and
G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on
the plate pass on SMLib's section and leave the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a
square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests
and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate
from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed
until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4):
Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns
the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded
less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to
1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet
takes a turn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the
ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the
blend rework too) and the Y junction (refused for room at its triple points).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope
removes; the law with a corner is its own test, listed as failing until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
removed_by_balls integrates, in each plane square to a right-angled edge, the corner the union
of the balls leaves (by rays from the edge, the least entry over the balls), cut to the body's
section. The law with a corner through a middle point is its own test, listed as failing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: a spline radius whose balls fold over one another at its peak is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within
1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed
as failing passes on SMLib's step 3 and leaves the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
The new section builds their edges on the surfaces, so STEP export no longer finds them 4.6e-5
to 6.1e-5 off. develop's Reference tests (60393a718) report all three as passing while marked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
A sphere split into two halves along a circle about its axis, each half covering a pole with no
seam, gets a seam per half from the first vertex of its loop to the pole. The circles between the
halves group their frames so they turn together, and when the two seams are not a whole number of
quarters apart no one turn fits both: the group kept its frames, a half's form ran past one turn,
SMLib's trim (SMLib and solidcore alike) across the form's end crossed the face, and the mesh
folded over the ball (a rotor's ball showed torn; its half had 196 times its area in triangles).
When no one turn fits the group, each spilling face is now turned on its own to start on a quarter
line. On the rotor file this also clears three other faces that were filled leniently and a
0.076 mm edge gap; regression test in step_in/tests.rs with the area and volume of each half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
(cherry picked from commit b3188e005d427043b918267449c2336a1777e54f)
* SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
A variable round is the envelope of the balls rolled along the edge, which takes less than a
quarter round in each section. The expectations are now that union, the law continued past the
edge's ends along its end slopes, integrated by Gauss-Legendre panels in x and t; 2, 4 and 8
panels agree to 1e-9 of the body's values, and 77's removed volume matches a brute-force union of
balls to 2.5e-10. The nearest-ball search now scans the balls the ray meets around ball x
(|x - s| < r(s) sqrt(sin 2t)) on their own, which near the faces and where 78's radius closes to 0
are narrower than the global scan's step. Regenerating keeps each case's known_failure. 79, a
constant radius, is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
SMLib builds a variable round's law corners as its balls' union (the corner
ball's zone at a dip, the sides' crossing at a peak): the kernel's corner
through a middle point (39.5410) and the crate's 4 -> 2 -> 4 law (39.5421) pass.
Rig 1207 (the bar's top edge rounded after the boss's arc, r0.5) builds and
grades on the same SMLib; it failed on c820346.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: every fillet and chamfer case rounds its tangent chain
The owner's ruling of 2026-11-01: the rig and the ladder round with tangent_chain true, how a
user's default pick behaves. The 38 fillets-area recipes and the ladder's 07-fillets/016 and 018
that passed false now pass true. The shell recipes keep theirs: a shell's tangent_chain is its
open-face chain, a different feature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
Where a case's point is one edge of a tangent chain rounded alone, a copy keeps tangent_chain
false as its own case (SMLib rounds exactly the picked edges, ending at the smooth vertex); their
expectations stay as they were, to be re-derived:
- fillets/1207-fillet-box-end-edge-into-unblended-round-partial-chain;
- fillets/every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain;
- fillets/1207-fillet-bar-top-edge-after-boss-arc-round-partial-chain, renamed from
...-no-tangent-chain: with the chain on it is exactly 1207-fillet-bar-top-edge-after-boss-arc-round,
which the rig already has;
- ladder/07-fillets/020 and 021, the r5/r3/r7 and r5/r3/r2 corners (016 and 018) with the r3 on
its edge alone: with the chain on, the r3 runs on along the r5 round's end arc and down the
vertical edge the third round was to take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
fillets/every-block-cylinder-tangent-concave-arc-r2-partial-chain: the pick takes one piece of the
concave half circle, which SMLib splits; with the chain off its other pieces are left out, and the
blend is refused at the piece's end (the base gate's outcome). With the chain on the case rounds
the whole half circle. The copy keeps its expectation, to be re-derived.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two chains that now build graded by their exact volumes
With the tangent chain on, two cases round more than the edge they pick, and their old
expectations were the single edge's:
- 1207-fillet-box-end-edge-into-unblended-round: the r1 chain is the end face's top edge, the r3
round's end arc and the back upright; 34 A + (pi/2) A (3 - c) by Pappus on the arc:
V = 7953.139216 (it built 7953.139216, the old 7957.505 passed only inside 1e-3), 10 faces.
- 851-fillet-top-front-then-front-left-upright: the upright's chain runs up the first round's
end arc on x = 0 and along the left top edge, so the corner becomes the R2 ball's eighth:
V0 less the first round's spandrel to the wall (35.344727) less 27 (4 - pi) + 2 pi/3:
V = 9530.777979 (built 9530.777987), 10 faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
- every-fillet-after-fillet-curvature-front-then-side-r3: the side edge's chain runs round the
first curvature round's end curve, whose radius of curvature has a weighted mean of 3 (its
setback) and is unbounded at the ends, so somewhere below 3: the size-3 blend's contact line
folds back on itself. Refused, "larger than the faces beside its edges allow", as ladder
07-fillets/016's r7 on the r5 arc. (It was solid or refused for running on tangentially.)
- every-block-cylinder-tangent-concave-arc-r2-no-tangent-chain: the chain takes every piece of
the half circle and ends at the convex edges it runs on into; it builds the analytic 19091.9620,
so the outcome is solid (the refusal alternative was the chain-off one's).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright: with the tangent chain on,
each R2 chain runs along the end curve of an R2 round on a curved face (the arc round's end on the
front face; the first round's end on the wall), where the rolling ball sits on that round's own
centre line, so the piece is the ball about (39.2538, -19, 8): the three-edge rolling-ball corner.
SMLib fails with status 1001; the same piece on a plane end arc builds (front-left upright).
Expectations unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
With the tangent chain on, 016's and 018's r3 runs on along the r5 round's end arc and down the
vertical edge, so the third pick (60, 40, 8) is 3 from both of that round's contact lines and
names no edge: refused, asking for a point along one edge. The corners they were made for are
020 and 021 (the r3 alone), whose golden entries are 016's and 018's (021 measured on f12a101).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
SMLib's Ball corner is always the rational patch exactly on the sphere (owner ruling, blend
design §23), so the corner counts as an 'other' face beside the three cylinders and six planes.
The removed volume still checks the corner against r³ − πr³/6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
The round's cylinder keeps the frame it was made on when it is turned (SMLib's SwapUV no longer
re-derives it): its origin sits at x = −20 on the same axis line, (x, 2, 8) along x, radius 2.
Same cylinder; one number in the record moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
On the CI runners the boss root and the hole rim, both size-2/size-1 curvature rounds, build
correctly but take more than 180 s: the order-2 section's span certificate and the round's
definition are evaluated station by station. The per-case limit is the one the thread cases use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Lid ring sketch test: find the ring under the pick, not by main's kernel's name
On SMLib the lip join's exact history names the lid underside's ring a piece
of the lid's own start (F14:start#[...]), as the naming rule says for a face
that came from the feature's input; main's kernel named it after the case's
top it rests on (F2:top). The test looked the ring up by that name and so
stopped before the attachment it guards. It now takes the underside piece
under the pick point, which the cap certificate attaches on either kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Viewport culling test: each box's triangles from its mesh, not 12
SMLib meshes a 10 mm box in 108 triangles, so the hard-coded 12 a box stopped
the test before it reached the culling. The expected counts are now each
body's span in the scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Timeline chip test: a fillet that really reduces
The R20 fillet with fit reduce on one top edge of a 10 mm box builds on SMLib
without a reduced-radius warning, so the fixture had no warned feature. It
now rounds the four vertical edges at R6, reduced to the full round (5), as
the copy-warning test beside it does, and checks the warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
A seam's two sides are the same face, and edge names list each face an edge
bounds once, so SMLib's extruded circle names its side's seam F2:side:c1, with
no separator. The name grammar now says one face also means a seam. The #5858
test no longer counts one '|' an edge: every part of every edge name is a
whole face name of the edge, one per face it bounds, two for the rims and one
only for the side's seam (checked to run bottom to top on the circle).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
SMLib's setback corner takes a G1 fill only once certified convex, and refuses a setback too
short for that as SMLIB_ERR_NO_ROOM with SMLIB_FIT_SETBACK_AT_LEAST, the smallest setback that
builds. The kernel reads it (solidcraft-smlib binds smlib_blend_fit_size) and names it; the
Fillet dialog says it in plain words. Other room refusals keep their words. The r5 box corner
set back 5.5 is refused naming 5.962, which builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
Each round runs whole to its section square to its edge at its setback (the owner's rule, at
least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the
setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1.
Outside the box the sections span the body is the three strips', so its volume is theirs within
that box's. A later r3 round at the mitred corner makes the body all three at once make
(7928.142563938, 15 faces), as the engine and the model-cache tests have it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
A primitive cut skips the sheets kernel::apart (exact bounds grown by the record tolerance)
finds clear of its tool; the bend check leaves the clear case to kernel::boolean, which answers
it from the same exact boxes with no intersection work. The mesh-box helpers are gone, and their
four lines leave xtask/mesh-decisions.txt (172 sites left).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: AGENTS.md loses a stray merge-conflict marker line at its end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
Main made vi a complete catalog; develop's new message (ui.fillet_error_setback_short) had no vi
entry, so every_complete_catalog_carries_every_english_message failed on the merged tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
1213: the loft is a cubic skin through the five sections (ellipses between
them), not a torus; its volume 131601.597487935 by quadrature less the exact
rolling-ball removal 233.662461919 gives 131367.935026 (was a Pappus estimate
on a torus, 131360.148, at rel 5e-4).
4782: the section's area in closed form, 25 pi/3 - 5 sqrt(75) + 25, so
V = 630.2934873 (was a grid estimate, 630.293125).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
They take 37 s and 34 s alone on the box, but CI runs 8 cases at once on slower runners. Their
G2 certificate cost is the open item (tangency-labs/smlib#106, moved to solidcore#2344).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
Develop's list was taken on develop alone. Main's code (tap-marking reach, cut and hole box
checks, join pieces, print faces, placed measuring, selection items, imported mesh payloads) and
the branch's own exact_edges and named_vertex use meshes too; three listed functions were renamed
by main (face_outline and plate_recesses into FaceSlice, paste into build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* After the merge: main's new tests on the SMLib kernel
- Cut To the far side of a curved wall (#8634): the tool stops past the first crossing of the
face ahead of the profile; SMLib's whole bore is one face that a line crosses twice, so the
single-crossing rule found none and the cut took nothing.
- Clearing view analyses goes through refresh_display, as main's #10687 made the others, so an
open feature editor keeps OK and Cancel after Zebra.
- vi, a complete catalog on main, gets the setback-too-short message.
- fillets/KNOWN_FAILING: 4782's cause is now its continuity check (SMLib f916a8d builds the
expected volume).
- Known failing, as main's tests assume truck: the spline wall's spans as one mesh patch, a
hole touching an edge at a point leaving one body, and a copy of a copy's triangles matching
a fresh mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
A twist about a straight path maps a profile circle centred on the path's
line onto itself, so its swept wall is exactly the cylinder. The skin
through the stations stayed within 3.9e-9 of it (6.6e-9 on the outer wall),
and a boolean with another body on that cylinder failed with status 1001
(solidcore#2184; the kernel's handling of a B-spline face lying on a
cylinder stays open there).
sweep_controlled now builds those walls exactly when the path is lines
along the profile's normal and there is no end scale or rails: a profile
whose every loop is such a circle is swept untwisted, and such holes in
another outer loop are cut as exact cylinders from the skinned sweep of
the rest. Other loops, and an axis-centred arc inside a loop of other
curves, are skinned as before; a failed cut falls back to skinning all.
Regression test in smlib_sweeps_tests.rs: #2184's tubes joined at 10, 16,
18, 20 and 30 degrees give one closed body of 11.5625 pi with cylinder
walls; a twisted hexagon with the bore keeps a cylinder bore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU
* After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- `hole_misses` (main's #10701, through brett's branch) decided from the targets' mesh boxes. It now uses their exact boxes (`Body::exact_bounds`). An unknown box still leaves the hole not known to miss.
- With #10303's two shortcuts and `hole_misses` off the mesh, `body_box`, `mesh_box` and `padded_box` have no caller left, and are deleted.
- `project`'s intersection link passes its one face to `meeting_edges` as a one-element patch. This branch picks one face, not #9009's mesh patch.
- xtask/mesh-decisions.txt drops the six sites that no longer use a mesh here: `apply_traced_with`, `cut_end_past_face`, `beyond_cylinder_reach`, `hole_misses`, `body_box`/`mesh_box`/`padded_box`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
`frames::split_move` returns a Result on this branch: an unplaceable model is an error, not a silent no-split.
- Move/Copy of a component (main's #9914) propagates it, as its other calls do.
- `to_local` had the solid.move check twice after the merge (brett's Option one and ours). Ours stays, after the no-picks/not-placed return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: main's two new tests take world_state's Result, as the rest of their files do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it.
Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere:
- Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre.
- Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`.
- STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included.
- Iso curves and SSI of the label are refused; the face's form is what evaluates.
Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds.
Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Since f916a8d:
- #120: every target again, plus the warnings fix;
- #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit;
- #122: tests gated on counts;
- #123: the Mixed corner;
- #124: the End at a smooth vertex;
- #125: four or more rounds, and open setbacks;
- #126: the equal-area thumbweight guard;
- #127: the trunk merge.
The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* smlib export tests: rustfmt's line for the rounded cube's edge midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all.
New failures, recorded as they are, each with its reason. They passed on f916a8d.
- **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume.
- **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only.
- **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added.
Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input:
the union's post-process keeps pointers to edges it has deleted. A golden
entry's `unstable` reason makes the gate compare that case's status only
and name it in its output; recording keeps the reason, and only an edit of
the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge with main: its new code on develop's exact bounds, types and thread fields
- The sheet cut's cull (#10301) and the tapped wall's (#10227) use each
body's exact box (`exact_box`), not its display mesh.
- model.threads replies with develop's thread fields: form, hand (right,
left or both) and starts.
- surface.boundary's schema checks a network curve's continuity as the
handler does, and words a list entry's error as it does.
- Main's new tests take develop's Hole fields and world_state's Result.
- mesh-decisions: contact_sweep's triangle check is now `depth` (main
split `hits`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now
Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that
passed on f916a8d, and passes two listed ones. Each new line says what the
test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause.
shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and
oracle 37-pyramid-apex-blend pass and leave their lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's six new sketch-only commands are exempt from a kernel case
sketch.construction_line (and its horizontal and vertical forms) and
sketch.spline.insert_point, remove_point and reverse change only the 2D
sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- The per-target cut loop skips a body whose exact box lies clear of
every tool's, as main's version did with mesh boxes. The sheet culls
(#10226, #10301) and this one now leave the far sheets and bodies alone:
a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the
known-failing list.
- a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face:
a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is
far past the bodies' tolerances); touching and 0.1 mm in still cut.
- Known failing, with reasons: main's edge lookup by a stored point
(#11286, on the display mesh) is not taken; SMLib refuses the
wrong-way chamfer for its tangent chain first.
- EXEMPT: main's eight new sketch-only commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
62 of the commands main added change no geometry: the view and render
panes, rendering lights and results, appearance tools, settings profiles,
point clouds (drawn as points, never a body), the selection, two sketch
edits, component links and History bar visibility, edit.repeat,
timeline.play, inspect.compare_picture (a picture against the outline),
and component.paste_from_design, which pastes the app's cross-window
clipboard that no command fills. Each joins EXEMPT's first section under
its family's reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: construct.plane.axis_point gets construction cases
The plane through a box edge and its far corner, graded against its
closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal
of a point on the axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass
0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2
by the parallel-axis theorem.
- occurrence.align: a block's end face onto a base's top face: a quarter
turn about y, centre (70,20,20), box (65,15,10)-(75,25,30).
- joint.find_limits: a slider between two stops: min -20, max 10 mm.
- component.move_features, browser.reparent and
component.move_sketches.to_parts: items moved into a turned and moved
part keep their world place (volumes, centres and boxes by hand).
The mass case assigns a material it creates, so material.create and
material.assign leave EXEMPT. PATHS names the new command modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: export and print face cases in the import area
- file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box
written and read back (the meshes converted to a solid): V 6000,
A 2200, 6 faces, box (5,-10,0)-(35,10,10).
- file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints,
and the base's mesh, written in metres, reads back as the
1 x 0.5 x 0.2 box (V 0.1, A 1.6).
- body.print_face: a cylinder's flat end is accepted, its side refused.
PATHS adds the URDF writer and the print face modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: brett19 <brett19@gmail.com>
39 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. These commits sit on several merged branches, so the wave holds their combined result.
- 1b17dd7f5 brett19: Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
- 8f2c11da2 brett19: Drawings hidden lines: read develop's B-rep records
- c30ca0216 brett19: Hidden-line fixtures: build develop's records from the fixtures' data
- 5dd2509ae brett19: Hidden lines: tests of the bounded edges, face charts and placed revolutions
- 1642df0ea brett19: drawing-hlr doc: what is drawn and refused on develop's records
- ddcb80c8e brett19: hlr tests: a placed revolution is refused when its placement is not rigid
- e4977721f brett19: Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
- b3ef6ae52 brett19: Hidden lines: kernel bodies through the production prepare against closed forms
- 4cd2ae062 brett19: Tests from main: the world state is a Result here
- 51d7ad09e brett19: A blend's pick measures close edges on their curves, not their polylines
- 11a89713c brett19: Merge fixes from the first SMLib test pass
- 48fcb7aac brett19: Merge fixes from the ui test pass and the gates
- abd739855 brett19: A silhouette takes its facing from the surface's normals
- 85114c5a2 brett19: Clippy and rustfmt on the merged tree
- 55a46569f brett19: Stepwise open checks every feature under the session's mode
- 4627402e4 brett19: Clippy without SMLib: the planar-sheet edge reader is built only with it
- 5fbece0ac brett19: STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
- eb78d20b0 brett19: Lid ring sketch test: find the ring under the pick, not by main's kernel's name
- 3048d8c49 brett19: Viewport culling test: each box's triangles from its mesh, not 12
- dc88b80e2 brett19: Timeline chip test: a fillet that really reduces
- 876203621 brett19: Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
- 900635710 brett19: rustfmt on the merged tree
- b7e83cd7c brett19: Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
- 63bde053a jyviko: Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
- 967a1caa6 brett19: Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
- 82c821d2a brett19: After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
- 5862ee223 brett19: After the merge: main's new tests on the SMLib kernel
- be78372b2 brett19: Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
- 312d14500 jyviko: After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- 6f7e51acb jyviko: After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
- 8f0c79b20 jyviko: After the merge: main's two new tests take world_state's Result, as the rest of their files do
- 5f4d70061 jyviko: After the merge with main: its new code on develop's exact bounds, types and thread fields
- 2b2ab6627 jyviko: Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
- e6a4b0a9a jyviko: Kernel rig: main's six new sketch-only commands are exempt from a kernel case
- 5acbd2e71 jyviko: Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- d2b202307 jyviko: Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
- 21db090ba jyviko: Kernel rig: construct.plane.axis_point gets construction cases
- c1f45cae2 jyviko: Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- 084695416 jyviko: Kernel rig: export and print face cases in the import area
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e01031bc jyviko: smlib export tests: rustfmt's line for the rounded cube's edge midpoints
- c29190ec3 jyviko: Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
- 62d372cc1 jyviko: Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
- 2bf58241f jyviko: Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A join that reports no history names faces by comparing the meshes before and
after. When the join makes the body bigger, round walls are meshed differently
and miss their old mesh at the naming tolerance, so they were named as the new
feature's faces. A curved face with no match now looks again within the two
meshes' chord tolerances. An edge name saved while a wall had the wrong name
falls back to the edge at its stored point.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: instances stepped in from an arc stop where the arc runs out, not turn round
Each instance after the first takes its side from a point one more step
past the last one. Stepping toward an arc's centre past an arc smaller
than the distance, that point lands beyond the centre, and the side was
read by comparing the point with the two offsets at the full distance:
the one toward the centre doesn't exist there, so the other won and the
next instance went back out onto an earlier one. The side is now read a
hair from the curve, where both offsets exist, and the point stops
halfway to the centre. The arc then runs out of room and the command is
refused there, as for a ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offset side: read off the picked line or arc itself
A tiny step compared at large coordinates rounds away, and an arc left
smaller than that step by an earlier instance still has no offset toward
its centre: both turned the side round. A line's side is now its
half-plane and an arc's inside or outside its circle, as a circle's
already was; other curves compare both offsets' distance as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9687
* Joints: Edit Joint and Unsuppress meet a conflicting loop joint as Joint does (#9687)
joint.create (#10371) turns an angle a half turn when a new loop-closing joint
comes out as a conflict, so a second planar joint whose faces point the same way
meets. joint.edit never did, so a design saved before that (the report's rail on
two planar joints) kept the conflict however the joint was edited, and a joint
unsuppressed after its part was turned away stayed one too, though Move's hint
says to edit the conflicting joint.
An edit that places the joint again (type, offset, angle, flip, a side, or
unsuppressing it) now tries the same half turns. A rename alone moves nothing.
* Joints: a loop group over the solver's values still moves the loops that need to (#9687)
A frame held by many planar joints (the report's printer: six planar joints
between two profiles, and more) ties its loops into one group through the
shared values. Past MAX_LOOP_VALUES (64) such a group was only checked, so a
new joint closing a loop in it (Joint35, the rail on the 450 mm profile, which
took the group from 63 to 69 values) stayed a conflict, and nothing in the
group could be driven or dragged any more.
Such a group now moves the values of the loops that need to move, those open
at the start or reading a held value that moves, when they are few enough,
while every loop of the group stays a residual, so the others stay closed.
Groups within the cap solve as before.
* Joints: closed loops through a moving value follow on their own closing joint (#9687)
In a loop group over the solver's values, a closed loop that runs through a
value the open or driven loops move (a part slid on one planar joint and held
by a second) kept its closing joint's values, so its gap opened and the solve
failed. Those closing joints' values move too: they are on no tree path, so
freeing them pulls in no further loop.
* Joints: loops a motion link ties to a following closing joint follow too (#9687)
A followed closing joint whose value a motion link sets moves the value its
link chain starts from; closed loops through that value now follow on their own
closing joints as well, until no more do or the values pass the solver's cap.
* Joints: say what the narrowed loop solve does not find (#9687)
* Joints test: measure the peg's 30 degree turn from where the loop left P0 (#9687)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Arabic: one spelling of component in the Components from Bodies hint, history filters, delete prompt and appearance help
The catalog writes component as مكوّن (with shadda) in 68 places; five
messages used مكون. They now match.
* Arabic: included-settings label and computer term in the profile rows
* Arabic: tanween spelling in the components-start-open note
* Arabic: OK button name in the Find Limits hint
- Les motifs rectangulaire et circulaire prennent bodies et nomment leurs copies source (2), (3)…, en sautant les noms pris
- Motif de features : nouveau BodyN, comme le miroir ; noms lus dans created_bodies
- Miroir d'une copie : suffixe ajouté ; body.rename pour des noms stables ; renvoi à #8194
Co-authored-by: P'tite Tête <asso@ptitetete.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- b8fa0d8aa brett19: Known failing on solidcore after the f916a8d sync; blend_fit in the entry-point guard
- 5a93e6c4d brett19: Make the C++ SMLib kernel opt-in at build time (feature smlib, off by default)
- 29a148abd brett19: CI: build without the C++ SMLib kernel except where a job needs it
- e30cfd2ac brett19: Tests and the rig for a default build without the C++ kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Keys: a sketch and the model kept apart on Scope
`command_for` fell back to the first enabled command bound to a key, so a model key pressed in
a sketch (F, Fillet) still ran the model command. A key now runs only a command of the scope
the view is in, or one that works everywhere; otherwise nothing fires. Inspecting, views and
file commands (`inspect.*`, `view.*`, `file.*`) count as everywhere, so Measure's I still works
in a sketch. #4432's `sketch_and_model_keys_are_kept_apart` is ported to `Scope`.
Not ready: main's `the_extrude_key_in_a_sketch_finishes_the_sketch` (#2815) expects E in a
sketch to finish it and open Extrude, which this rule stops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keys: keep model keys out of sketches as an opt-in preference
The strict sketch/model split is now Preferences > Shortcuts > Keep model
keys out of sketches, off by default. Off, a key resolves exactly as on
main (a feature key such as E still finishes the sketch). On, a sketch
runs only sketch keys and keys that work everywhere (inspect, view, file).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Redesign Appearance preferences
* Reach the theme Import card by paging the carousel in the VFS import test
The redesigned Appearance page puts Import as the last theme carousel card,
so the test scrolled the page to a card that was not drawn. Page the carousel
until the card is on screen; both the in-scope and out-of-scope picks are
still checked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A hole in a design with sheet metal first tried to bore every sheet of its
component, building each panel and running a boolean on it, and then
checked every sheet again to see whether the drill met it at all. For a
sheet far from the hole both only found nothing: with 50 sheet parts that
was most of a hole's time. Now a sheet whose box lies clear of the
drill's box is left out of both, with the same grown boxes the other
sheet cuts use, so a drill into a sheet's rim still bores it. A drill a
sheet would refuse whatever it meets (an invalid one, or one more bore
than a sheet may hold) is still put to every sheet as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The countersink tool was a cone started at the run-on height above the
face, so above the face it was wider than the countersink and kept
widening: a wall or step just past the rim was notched. The tool is now
one revolved profile: the cone from just above the face down into the
hole, and above it a cylinder of the countersink's own diameter. The cone
is the profile's first segment, so its face keeps the name csink:side:0.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7410
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Break: break at a shared point separates the curves that meet there (#7410)
Two lines drawn as one chain share their corner point. There was no way to pull them apart:
Break there said "nothing to break at there", and deleting the point deleted both lines.
sketch.break aimed at a point where the picked curve ends and another curve also meets now
gives the picked curve its own end there (`<curve>.start` or `.end` when that id is free), at
the same place: both curves stay where they are and are no longer joined. The Break tool
snaps a click on the corner to that point, so clicking it works the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7584
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* macOS update: say to quit SolidCraft before replacing it (#7584)
After Download and open, the update window told people to drag SolidCraft
to Applications, replacing the old copy, then restart it. Finder refuses to
replace an app that is running ("the item “SolidCraft” is in use"), so the
message now says to quit SolidCraft first, then drag the new copy over and
open it again. "Quit" rather than "close": closing the window on macOS can
leave the app running.
The id update.dmg_opened is unchanged; every catalog that carries it is
updated, and the user guide's update tables get the same step.
Fixes#7584.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10909
* Crash report commands: input and output schemas (#10909)
diagnostics.crash_reports, diagnostics.crash_report,
diagnostics.crash_reports.clear and diagnostics.crash_test get typed
contracts and reply types in schema/diagnostics.rs and leave
unconverted.txt. Strict now refuses an `id` that isn't text on clear,
which the handler reads as no id and so deletes every report.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10898
* Standard views and Normal To: input and output schemas (#10898)
view.front, view.back, view.left, view.right, view.top, view.bottom,
view.isometric and view.normal_to get typed contracts (an optional
`camera`, read by the new shared CameraParam type with the commands' own
reader) and a CameraReply output, and leave unconverted.txt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
edit.undo, edit.redo, edit.checkpoint and edit.restore_checkpoint get
input and output schemas in schema/edit.rs: the first three take no
keys, the last takes `checkpoint` (with the handler's message for a bad
id) and `forget`. The handlers build their replies from the reply
types. Their lines leave unconverted.txt.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10938
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Library commands: input and output schemas (#10938)
library.inspect, library.export and library.apply get typed contracts
and reply types in schema/libraries.rs and leave unconverted.txt. The
handlers' own serde parameter types move there and become the
contracts, so the contract is exactly what each handler reads; the
catalog, provenance and apply result schemas are written by hand, since
solidcraft-io doesn't use schemars.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10942
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List Edges, List Faces and List Threads: input and output schemas (#10942)
model.edges and model.faces take a typed `body`; model.threads takes no
parameters. Their replies are built from ModelEdges, ModelFaces and
ModelThreads in schema/inspect.rs, with the same JSON as before, and the
three commands leave unconverted.txt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10949
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Curvature comb, minimum radius, isocurve, centre of mass: schemas (#10949)
The four analysis commands get typed contracts and reply types in
schema/sketch_inspect.rs and leave unconverted.txt. Each point list has
its own type with its handler's messages and reads only as many points
as the handler does; `count`, `density` and `scale` read numbers as
params::num does. The replies are built from the types, with the same
JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11059
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration table, rules, activate and preview: schemas (#11059)
config.table, config.rules, config.activate and config.preview get typed
contracts and reply types in schema/config.rs and leave unconverted.txt.
A new `table` builds the table from ConfigTable; show and the activation
build their replies from it, so the unconverted config commands still
return the same JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11083
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boundary Surface: input and output schemas (#11083)
surface.boundary gets a typed contract in schema/surface_boundary.rs and
the shared FeatureResult as its output, and leaves unconverted.txt. One
struct holds both forms; each key reads as the handler reads it, with
its messages, and `u` and `v` check their items where the handler does
without the design, index included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10959
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Loose Ends and Tie Loose Ends: input and output schemas (#10959)
sketch.loose_ends and sketch.loose_ends.tie get typed contracts and
reply types in schema/sketch_ends.rs and leave unconverted.txt.
SketchTarget reads `sketch` as sketch_store::target does and PointIds
reads `points` as the tie does, each with the handler's messages. The
replies are built from the types, with the same JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11075
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of Materials: input and output schemas (#11075)
assembly.bom gets a typed contract and reply types in schema/bom.rs and
leaves unconverted.txt. Each key reads as the handler reads it, with its
message; the reply is built from Bom, BomRow and BomChild, in the old
field order, so the reply and the files it writes are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #6843
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sheet metal: material joined in the plane of a panel is kept (#6843)
An extrude join through sheet metal went through the generic boolean:
the body grew, but the sheet model didn't, so the flat pattern, DXF and
bend table were refused, and the next sheet feature (a refold) dropped
the material ("what ... changed is not kept").
An untapered extrude join one sheet thick in the plane of a panel (the
base or a flange's panel, unfolded or folded) now joins the sheet model:
each region of its sketch becomes part of the one panel it is one piece
with, apart from every bend zone and the other panels, so the flat
pattern, its DXF and a refold keep it, and it follows its sketch's
parameters as a cut made there does. Cut-outs it covers are filled. A
join of another depth, out of every panel's plane, touching a bend zone
or another panel, or over a pocket, label, bore or perforation keeps the
generic path and its warning.
The extrude records its sketch plane and depth for a join too (its
profile grows into the material it joins, so it never counted as
untrimmed). The test that refused a joined tab beside a plain base now
refuses a block standing on the sheet instead; the tab is kept.
Fixes#6843.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On the Blacksmith CI runners two quick same-size writes can share a modification time, and a
stale review page once accepted changed art there
(test_changed_art_reopens_and_requires_deliberate_current_acceptance failed intermittently).
art_rev() now hashes every file by content on main (b622a466); this test keeps it that way by
giving an edited SVG its old timestamp back and checking that the stale page is refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5968
* Joint dialog: Find Limits fills the limits from where parts collide (#5968)
joint.find_limits sweeps each value of a joint both ways from where it is,
on a copy and with its own limits left out, and answers where the parts it
moves first touch another part, where a closed loop stops closing, or that
nothing is met within a turn (angles) or the parts' reach (distances).
Edit Joint's Limits section gets a Find Limits button that runs it on the
joint as the dialog has it, off the window thread, and fills the rows.
joint.sweep now tells touching bodies apart from the other bodies of the
same two parts: on the Hinge Assembly sample the pins touch where it starts,
and the plates used to pass through each other unnoticed.
* find_limits: read the session only
* find_limits: a joint with nothing to meet, edits during a search, tiny ranges
* find_limits: keep touching at the start per pair of parts
Per body, the Hinge Assembly sample's plates, which only come flush in
the end plane the two leaves share, stopped the search. The leaves never
pass into each other: the sample's answer is a whole turn.
* find_limits: touching boxes cost no collision work; stale results and rounding
* find_limits: each pair of bodies of resting parts held to its own depth; loops without bodies
* find_limits: a 32-bit budget it can pass, a repaint with the result, a bad form says so first
* find_limits: each pair of resting bodies gets its own margin
* find_limits: Arabic, Hebrew and Vietnamese strings (complete catalogs on main)
* find_limits: search the joint with Edit Joint's side picks
Edit Joint now keeps the joint's sides as picks in its inputs, and its OK
commands compare them with what it opened on. Built without them, the
commands Find Limits applies first asked for the sides again, so every
search failed.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
A tapped hole looked for the cylindrical wall its marking lies on in
every face of every body of the design, measuring each face over all of
its body's triangles. A body is now passed over when the drill line,
widened by the hole's radius and a margin, misses its box (from the
mesh it keeps, which the wall's triangles are part of): no face there
can be the wall, so the marking stays the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8151
* Opening: a design saved by 0.24 keeps the body a Join To Object runs to (#8151)
Since 0.24.1 a Join extrude To Object also joins the body it runs to
(#6424). Designs saved by 0.24.0 and earlier were built without that,
so on 0.25 the reported box swallowed its lid: the lid's sketch, the
holes, the cut and the moves after it failed.
An extent may now save `to_body_apart: true`, which leaves that body
apart. One pending format change sets it on every Join extrude To
Object of a design of format 39 or older as it opens; designs of
format 40 and later keep the join. Editing the extrude keeps the field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A pattern or mirror replays its source hole's definition, so a hole with
reference edges finds its centre again from them. That happens after the
hole is drilled: through the part, the centre is then in the opening, and
the check that the centre lies on the face refused every copy. The replay
now skips that check; placing the hole itself still makes it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Before a cut ran, every sheet metal body of its component went through a
boolean with the tool, to make sure the cut would not take material the
flat pattern cannot keep. For a sheet the tool does not reach, that check
only found nothing: in a design of 50 sheet parts it was about an eighth
of a hole's time. Now a sheet whose box lies clear of every tool's box is
left out of the check, with the same grown boxes the cut itself uses
(#10225), so a tool that touches or grazes a sheet is still checked.
Sheets shown in another frame and Intersect are checked as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9274
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: placements start closed (#9274)
A large assembly opened with every placement unfolded, so the browser was a
long list to scroll through. Placements now start closed; opening one shows
its own placements still closed, and closing and reopening it leaves them as
they were. Find in Browser, a pick in the view, Expand All and Collapse All
open and close them as before.
Preferences > Interface > Components start open (browser_components_open)
keeps every placement open from the start, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: scenarios and the icon audit open placements, which now start closed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: tests that read rows inside placements set the open-placements preference
Three tests added on main since this branch started (joint folders, Features
folder marks, group rename) look at rows inside placements, which now start
closed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* PR rules: a title has to make sense to someone who never saw the chat
Agents write PR titles from inside their own context, or copy the issue's title, so a maintainer reading the list can't tell what a PR does. AGENTS.md, the contributing skill, CONTRIBUTING.md and the PR template now say who a title is for and show an unclear and a clear one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K14jA88xLsBfMkWo4Da5uh
* PR rules: write PR text in plain, literal English, and use a clearer example title
The first example still said "that window", the kind of pointing word the rule bans. The new rule takes the useful parts of Simplified Technical English without its approved-word list, which doesn't fit CAD terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K14jA88xLsBfMkWo4Da5uh
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With a profile or face picked, clicking a face, vertex or parallel plane that is
not in the profile's plane now sets Extrude to To Object, not one more profile.
Clicking into the Profiles box first makes the next picks profiles again.
Preference extrude_auto_to_object (Tools) turns it off.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A pull request now starts by saying what it is in plain words, and shows
anything there is to look at in its description. A file in the diff
doesn't count. The new Picture check fails a PR that adds to the showcase
or docs/screenshots without showing a picture. It isn't a required check.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3902c954 jyviko: SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The editor reused the new-hole Face input, which is multi, so a second pick
appended and OK silently kept the first. Editing now makes that input single,
so a pick replaces the place.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
`sketch.rectangle.rounded` read `p0` and `p1` with `req_vec2`, so a corner typed as an
expression (`["W / 2", "H / 2"]`) was refused with "`p0` must be a point [x, y]", although the
2-point rectangle it hands the corners to already places expression corners and keeps them
following their parameters. The corners are now read with `corner_arg`, as the 2-point and
center rectangles read theirs; the worked-out values still check the radius against the sides.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A value typed before its target opened the box 18 px right and 10 px below the
pointer, so its frame covered the geometry a click was about to pick. Near the
viewport's right or bottom edge the clamp then slid the box back over the
pointer, losing the gap where it mattered most. It now keeps a 30 px gap, and at
an edge it opens on the pointer's other side instead of sliding back.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Convert to Sheet Metal refused a tray made with SolidCraft's own sheet metal, exported and
imported again: its walls run on past each bend's end (notch, tear and round corner reliefs), so
the edges beside the bend cylinder's edge never reach the other face's plane and the face could
not be trimmed ("a face beside a chamfer picked as a bend does not reach the face across it").
Where that edge is round or runs on along the bend's line, the face now keeps its corner and
steps down square to the other plane, a step the bend's setback takes up again; the inset drops
an edge the setback leaves shorter than the tolerance.
Test: trays_of_its_own_sheet_metal_convert_back (notch, tear and round, the walls made in one
flange feature, and notch and round with the short walls in a second one): the volume, the flat's
size and outline area and every bend's length are the source's.
Fixes#7529.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6452
* Engine: a pattern or mirror copy of a join keeps its ends as drawn (#6452)
The copy's tool is rebuilt against the current state, which already holds
the source feature's own material; the embedded-join-end trim (#2059)
read that material as the target already filling the copy's bottom band
and trimmed it away before the copy matrix was applied. Mirroring or
patterning a join on a hollow part silently lost the floor-level slice.
Copies now skip the trim: their ends are where the source drew them.
* chore: re-trigger duplicate PR check
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Breaking a dimensioned line left the length on the first piece, which the solver stretched
back to the whole length, skewing the line. A cut on (or a hair from) an end, as where a tangent
arc meets a line, made a zero-length piece with its coincident and collinear ties every time
Break was clicked there.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Redesign General preferences
* Update Preferences regression fixtures and gallery coverage
* Keep measured Preferences faces out of neutral exclusions
* Keep the profile name entry in Preferences search results
The redesigned Profiles section had no search-visible control, so a query
such as "profiles" dropped the whole section and the name field could not
be reached with a search active. Report the entry row as a hit so the
section stays on the results page, and point the typing-focus regression
test at the redesigned "Profile name" field and "Save as new" button. It
still checks that typed profile names stay out of the search box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The refusal of sketch.project ended in "face of " with nothing after the
"of" when the reference named no body: a picked face, edge or vertex is
found by its geometry, so the body it belongs to is not in the reference.
LinkSource::describe() now drops the "of <body>" when there is no body to
name and names the kind alone ("face", "edge", "vertex", "spun
profile", "isoparametric curve"). A source that names a body keeps its
name.
Only the text changes: the command refuses exactly what it refused before.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A hole placed on the side of a cone with no direction drilled along
the nearest display-mesh triangle's normal, up to 2.6° off the
surface's normal and sideways. Planes, cylinders and spheres already
gave their exact normal; cones and tori now do too, from the surface
the kernel reports for the face.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11080
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: the shader compiles in browsers again (#11080)
The ambient occlusion turn added in #9335 mixed `<<` and `|` without
parentheses. naga accepts that, so the desktop app ran, but browsers'
WGSL compiler refuses it: the sc_viewport module was invalid, every
pipeline built from it failed, and the web app drew nothing once a
design was open. The line gets its parentheses, and a test checks every
shader in the repository for the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Move to Component: a sketch on a face inside the moved part goes along (#11063)
A face attachment stores the placement path it was found through. Moving
the placement into another component changes that path, the stored one
no longer starts at the design, and the move was refused as breaking
the sketch. Face attachments of sketches and construction planes, and
an emboss's face, now follow the move as the session's paths already do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move to Component: attachments made through any placement of the old parent follow
A parent placed more than once is one definition: a face attachment made
through another placement of it than the one named also ran through the
moved placement and broke. Every stored path through the moved placement
now runs through its new place. A path that would grow past the 64
placements a design keeps is refused instead of saved unreadable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A flange picked on one segment of a stepped base outline ran the base
face's whole length: trimming the picked edge back to the bend line
merged it with the outline's own edge on that line beyond the step, and
the flange took the merged edge. It now stays off the base's edges that
already lay on the bend line, so it spans the segment picked, with no
relief there: the base is already back at the bend line. The same
outline made by cutting notches into a rectangle gave the right flange
already.
Assisted-by: LLM
* Sketch: a dog bone's outline outside it meets outside both notches (#10984)
Where two tangent arcs touch at a cusp, the copies of the two arcs cross
twice, both crossings as far from the cusp, and rounding chose one: on
one side of a dog bone the outline ran both copies on and drew a loop
into the bone. Such a tie now takes the crossing that cuts both copies
short.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dog bone test: the outline goes outside, away from the picked bottom line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Rename: a refused inline rename keeps the editor and says why (#10654)
commit_rename dropped the command's Result, so a refusal closed the editor
with no message and left the old name. It now returns the error, shows it in
the status line, and the inline editor stays open.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* Rename: keep the command's status line when the editor stays open (#10654)
The command completion already explains the refusal; do not overwrite it with
the raw engine error.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Extrude started with the sketch still open ends the sketch on its way. With
"If a sketch ends: Return to the previous view", that end starts a camera
animation, and turn_for_extrude read the camera through settled_cam() - the
target of that animation - so the view saved as "before Extrude" was where the
sketch end was already turning, not where the command was clicked. The view is
now taken before the sketch is finished.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
The check that lets a key go only over HTTPS or to this computer ended the host part at `/` or
`?`, while the HTTP client also ends it at `#`, so the two could disagree about the host. It now
ends where the client ends it, and over plain HTTP the host part must be exactly this computer's
name with at most a valid port: no user name, backslash or stray character.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 4c1eed960 brett19: Tabbed plate: the rim and one corner arc round together (solidcore#2223)
- dd00ff989 brett19: Native wire fixture: a box edge round's cylinder keeps its own frame
- 584075662 brett19: Known failing on solidcore after the smlib merge: SMLib 5e8c9c1's new blend (solidcore#2273) and main's new tests
- 8af1fdf5a brett19: Known failing on SMLib (the .smlib list): as the smlib branch lists them at f916a8d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 597b23ba8 jyviko: Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
- 820b7b667 jyviko: Agents: AGENTS.md loses a stray merge-conflict marker line at its end
- 92734d7eb jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
- 653c16e6f jyviko: Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9914
Co-Authored-By: Claude <noreply@anthropic.com>
* test: Move/Copy copy of a picked component (#9914)
Tests for a component picked in Move/Copy with Create Copy: it is copied as an
independent component placed with the move, the original stays, one undo removes
the copy; a body picked with Create Copy stays a body copy; a component picked
without Create Copy moves its bodies as before.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy copies a picked component as a component (#9914)
With Create Copy ticked and the component pick mode on (or a Browser component
row), a picked component is copied as an independent component (Paste New,
component.paste_new) and the copy moves by the move's transform (occurrence.move
in the world). Bodies picked still copy as bodies; without Create Copy a component
still moves its bodies. The copy and the bodies are one undo step.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: solid.move copies of components reply like a move and roll back (#9914)
A copying move with components replies as a solid.move does: the bodies' feature reply,
with the copies listed in occurrences. The bodies are mapped to their frame before any
copy is made. The solid.move help documents occurrences. A copy that fails part way
changes nothing and leaves no undo step.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy takes a picked component whether or not Create Copy is ticked (#9914)
A component picked in the component pick mode, or a Browser component row, goes into
the Move bodies input as a component, so Create Copy can be ticked after picking it.
Without Create Copy the component still moves its bodies. Not while editing an
existing move. The Browser model tests read the bodies the command would move.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy preview draws a copied component where the copy lands (#9914)
The fast preview took the component's bodies from the listed occurrences as well as the
bodies, drawn moved by the move, so a component copy previews at the moved place
instead of the scratch design's unplaced states. Test: a component-only copy and a
mixed copy preview where the copy lands.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: a copying move refuses bodies that are not a list (#9914)
With components, a bodies value that is not a list was ignored; without components it
is refused. It is refused now, before anything is copied.
Co-Authored-By: Claude <noreply@anthropic.com>
* test: an edited move never takes a component pick, through the click (#9914)
Clicks the component in component pick mode while an existing move is edited: the pick
stays a body. Fails when the editing condition is dropped.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy preview takes components only for a copy, and the mixed test can fail (#9914)
The engine refuses `occurrences` without `copy`, so the preview leaves
such params to the full preview too. The mixed-copy test now gives the
component a taller box, so its height shows the component was drawn.
Co-Authored-By: Claude <noreply@anthropic.com>
* docs: component_pick no longer needs Create Copy ticked (#9914)
Co-Authored-By: Claude <noreply@anthropic.com>
* test: a component picked with its parent is copied once (#9914)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9284
* Localization: Russian "Close draft" reads as a draft analysis (#9284)
The report form's "Close draft" button said «Закрыть анализ уклонов»
(close draft analysis). It closes the report draft: «Закрыть черновик»,
the word the Russian catalog already uses for this draft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ad3ee0585 jyviko: Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
- 608d07eca jyviko: xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Hole: a hole moved off the material says it removes no material (#10701)
A hole whose position, parameter or sketch point moves it off the part
cut nothing and said nothing: the feature had no warning, and a
parameter sweep listed the value as fine. A hole whose tool is clear of
every body it cuts now warns "the hole removes no material" ("1 of 2
holes remove no material" for several), as a pattern does of its
copies. The check compares boxes only, from the meshes the hole already
found its face on, so a large hole pattern costs no extra booleans.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: a hole wider than the part says it removes all of it (#10702)
A through hole wider than the part removed the whole body with no
message, also when a parameter widened it later. The hole now warns
"the hole removes all of Body1" when a body it cuts is gone after the
cut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The card's area is as tall as it was the frame before, and the first
frame laid the body out shorter than it ends up, so the scroll area
stayed short and the Hatch row (and Flip, for a tilted plane) was cut
off. The card may now grow to the height it is allowed.
The offset is shown to the design's length decimals and a tilted normal
to three places, as the pill shows them.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10127
* Assemblies: a construction axis follows its component when the component rotates (#10127)
A construction axis or point built on a body now goes with that body when
Move/Copy moves or turns it. Each construction records the bodies its picks
lie on; the Move feature (not a copy) carries along every construction whose
bodies it all moved, with the same transform in the construction's component
frame. One that also reads something fixed stays where it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
sheet.fold refused any fold whose bend zone wasn't a rectangle. It now
crosses the sheet's own outer edges, slanted or on any curve: the outline
is cut exactly across the zone, the panels keep their real outlines, and
flanges and other folds still go on them. The flat pattern's DXF keeps the
curve as drawn. A sharp corner in the zone stays refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A permission question counted as one of SolidCraft's own tools when its title merely contained
"solidcraft". Now the whole title must be a tool of the chat's own MCP server, named as
`mcp__solidcraft-app__<tool>`, and its kind must be `other` or not given. Anything else goes through
the user's mode and remembered answers, or is asked in the panel.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10704
* Section Analysis: view.pick skips edges and vertices in the removed half
near_edges now applies the same section `kept` predicate the mouse picker
uses (viewport::pick, since #6722), so an agent picking through view.pick /
ui.pick no longer gets edges and corners the user cannot see.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A client could connect and send nothing, or only blank lines, and hold one of the 16 connection
seats for as long as it liked. All reads before the token now share one five-second deadline; the
connection is then closed without a reply. An authenticated connection may idle as before.
`solidcraft-cli mcp --connect` used to open a connection at start and hold it until the first tool
call. It now only checks that the app is there, and the first call connects.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On Windows the token file is restricted with `icacls`, which may not finish in time (#6145). That
counted as success everywhere, and is safe in the default folder, the user's own local app data.
A folder picked with SOLIDCRAFT_CONTROL_DIR may be readable by others, so there a timeout now
removes the still empty file and returns an error. The default folder behaves as before. The
decision is a small function of its own, tested without running icacls.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A design's lock file went through the same writer as the design, which follows a symbolic link
so a linked design is saved where it lives. The lock now has a writer of its own that refuses
anything at its path but a regular file and replaces only that name. Reading a lock takes only a
regular file and no more than a lock's size. Saving a design through a link works as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5136898b9 jyviko: Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
- e6db7be0a jyviko: Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
- 5d168a5e2 jyviko: Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
- 99953687c jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Also points the links at tangency-labs/solidcraft. The old list asked for reports of file access outside the allowed folders, and for crashes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Selectable transcript labels do not request TextEdit focus, so the global
clipboard handler also copied, cut and pasted selected CAD geometry while
the user worked with chat text.
Keep keyboard ownership with the visible chat after a pointer press until
the next press outside it. Release it when the panel is hidden, and do not
use selections from other native viewports as a global CAD shortcut guard.
Cover real label selection, clipboard events, fallback key events, quick
select-all, hidden panels and deliberate return to the CAD viewport.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10689
Co-authored-by: Cursor <cursoragent@cursor.com>
* Edit Hole: seed the face where the hole is now (#10689)
Project the stored position onto the drilled face along the hole direction when opening the editor, matching evaluation, so OK works after a parameter moves the face.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aed047703 jyviko: Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
- 17de3569f jyviko: SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Holes and cuts: count the bodies a cut works on in the cost tests
A test helper, cut_work, adds a feature at the end of a design and reports
how many bodies its cut ran booleans on and which bodies it left exactly
as they were (same geometry, key and face names). A new test pins that a
cut still goes through the boolean where its tool touches a face, runs
along an edge, passes a hair beside a body or drills into a dome.
The sheet metal hole (#10226) and cosmetic thread (#10227) work reuse the
helper for their own shortcuts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Holes and cuts: leave bodies the tool cannot reach untouched without a full cut
A cut ran a whole boolean against every body of its component, and for a
body its tool does not reach that boolean only handed the body back: about
7 ms per body, so a hole in a design of 200 blocks took 1.3 s. Now a body
whose box lies clear of every tool's box is left as it is. Both boxes are
their meshes' grown past how far the exact faces can curve out from them,
the same test sheet metal cuts already use, so a tool that touches a body,
grazes it or drills into a dome still goes through the boolean. Bodies
shown in another frame, mesh bodies and Intersect (which removes the
bodies it misses) are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cosmetic tap markings: look for their cylinder only in nearby bodies
A tap marking (a Thread feature, or the marking of a tapped hole) looked
for the cylinder at its point in every body of the design, and each
search meshes the body afresh: with many bodies and many markings that
grew quadratically (200 markings on 200 cylinders: 33 s of a 33 s run).
A body is now passed over when its box, from the mesh it keeps and
grown past that mesh's deflection, lies farther from the point than the
search itself would look (a twentieth of the body's size, plus its own
mesh's deflection). The search finds no face there, so the marking and
everything else stay the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- f9fc68167 brett19: solidcore: a curvature fillet is the equal-area Gⁿ section; mixed wedges refused
- d52cf6b14 brett19: Known failures at solidcore adf26ddbc: curvature and variable rounds built
- 5ec92b0ba brett19: Move the solidcore pin to 2dbd88b6e
- 92618ac4c brett19: Turn on solidcore's new fixes at 2dbd88b6e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #5388
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: rebuilding a projection keeps the sketch's own curves on its points (#5388)
When a projected face changed shape, update_link rebuilt the link with
drop_link_entities, whose remove_points also deleted every curve using a
projected point: a circle the user drew on a projected hole's centre vanished,
and the extrude on it lost its profile. Before the projected points go, the
sketch's own curves on them move to a free point at the same place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Selecting a plane in the view now draws the grid on it, so the plane a
sketch would use shows before the button is clicked. Deselecting returns
the grid to the ground.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
A Cut To Object on a curved face ran the tool through the target and kept
the tool less the body, the piece at the start. From outside a curved wall
to its inside face that piece is the air before the wall: the cut took
nothing, or the tool lay in the curved face and the boolean failed on the
coincident faces.
Where the target's material ends at the picked face under the whole
profile (rays over the profile cross it once, material before, none
after), the tool now ends flat halfway across the gap beyond the face. It
takes what lies before the face and meets no face of the body. Otherwise
the trim is as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Save As: refuse a name that opens as another kind of file (#9745)
file.save and file.save_as wrote a design container under any name, so a
design saved as part.step was refused when opened again and part.stl opened
as a broken mesh. A name doc.open reads as a STEP/CAD exchange file, a mesh,
a 2D drawing, a point cloud or a SolidCraft drawing is now refused, pointing
to .sc and, for export formats, to file.export. Names that open again as the
design (.sc, legacy extensions, .json, anything else) save as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Save As: check the folder scope before the design name (#9745)
A path outside an agent's folders is refused for that first, whatever its
extension, as before; the design-name check runs after it in `write`. Fixes
solidcraft-mcp tests::tool_calls_stay_inside_the_agents_folders, which saves
`x.step` outside the agent's folders and expects the scope refusal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10673
Co-authored-by: Cursor <cursoragent@cursor.com>
* AppImage: point the taskbar at the installed icon PNG (#10673)
Install hicolor icons before writing the desktop entry, refresh the icon cache, and set Icon= to the absolute 256×256 path so Cinnamon and similar panels show the mark instead of a thin strip.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- e30e983c3 brett19: Move the solidcore pin to 4d3ce6264
- c8351719e brett19: Move the solidcore pin to adf26ddbc
- d33b6eb30 brett19: Turn on fillet_gn_section_generator
- 3b4adeb73 brett19: solidcore: a variable round is built again, as the union of its balls
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: 10331
* Assemblies: a second planar joint turns its part a half turn to meet (#10331)
A second planar joint between two boards that mates faces pointing the
same way needs the board turned a half turn on the first joint. The loop
solve starts exactly turned away, finds no way round, and left the new
joint as a conflict; Move then said the part has no movable joint axis.
A new loop-closing joint now tries its own angle, each angle on the
joint path between its two parts, or one of each, a half turn round, as
the first joint of a chain moves its part into place, and keeps the
first that closes the loop without a new conflict. Faces that can never
meet stay a conflict and nothing moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move test: give the blocked part faces that can never meet (#10331)
The blocked-Move test from #10509 used two boards whose second planar
joint mates two faces pointing the same way. That joint now closes its
loop with the board turned a half turn, so the scenario no longer
conflicts. Mate the yellow front against the red top instead, which no
turn on the first joint can bring together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10688
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Feature editor: Undo, Redo and the History bar cancel an open editor first (#10688)
Undo, Redo and History steps changed the design under an open feature
editor, whose OK and Cancel then refused it. They now cancel the editor
first, putting its marker back, as starting another tool already does.
While an editor is still opening they wait for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A relation given no values already started from where its parts sit
(relation_values), so the part moves no further than it must. A typed joint
(planar, revolute, cylindrical ...) added between parts another joint
already relates started its values at 0 instead, so the loop solver began
far from the current placement and could report a conflict for a joint that
agrees with how the parts are placed.
Seed every loop-closing joint, typed or relation, from the current
placement when no values are given. Joints in an open chain and joints with
explicit values keep their initial values as before.
* claim: #10316
* Insert Part: ASME/ANSI inch hex cap screws, hex nuts and SAE/USS washers (#10316)
Part of #10316. New standard-part families, tabled in inches as the
standards give them and built in millimetres: hex cap screw (ASME
B18.2.1) and hex nut (ASME B18.2.2), 1/4 to 1 in UNC and UNF from the
thread catalogue, and plain washers SAE and USS (ANSI B18.22.1 Type A).
Cap screws take the standard inch lengths, 1/2 to 8 in, defaulting to
the first at or above 2.5 d.
Lengths read as fractional inches in Insert Part, Change Part Size, part
names and part numbers. Insert Part gains a Unit system list (Metric,
Inch) above Type; it opens on Metric. parts.library reports each
family's system.
Inch parts get no cosmetic thread: solid.thread takes only metric
designations (#9571), and the old path would have made a wrong metric
mark. 9/16 waits for the thread catalogue; split lock washers and
carriage bolts follow in later PRs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The editor accepts revision changes that only changed what is shown,
counted by the display revision, but only hiding and showing counted
there. Section Analysis, the surface analyses, continuity, the
selection, the status pill catching up and view.render_select bumped
the revision alone, so turning a section off with an editor open made
OK refuse ("the design changed while the feature editor was open") and
Cancel leave the timeline rolled back. They now go through
refresh_display, as visibility changes do.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10852
* Circular pattern: the axis origin takes length expressions and follows them (#10852)
solid.pattern.circular with axis {origin, dir} kept its origin as plain
numbers, so a pattern about a parameter-driven point stayed where the
point was when the pattern was made: the seed moved with the parameter
and the copies did not. Expressions were refused (#248).
The pattern's origin is now a point of expressions, as a Mirror plane's
origin is: numbers or length expressions, evaluated on each rebuild, and
renamed with their parameters. Plain numbers are saved as numbers, as
before. timeline.edit sets pattern.origin as expressions, and editing the
pattern in its dialog keeps them. One pending format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9660
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Move bodies of differently turned components in the world together (#9660)
A Move feature moves each of its bodies in the body's own frame by one
vector and one turn. `solid.move` mapped the world vector and axis into
the frame of the first body listed only, so a body in a frame turned
otherwise (a part inserted with a non-default direction, moved together
with a block of the root) moved along its own axes.
When the bodies listed lie in frames that turn differently (or, for a
turn, also sit in different places), the move is now split into one
Move feature per frame, each with the vector and axis mapped into that
frame, in one undo step. Bodies sharing a frame still make one feature.
Fixes#9660
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
A surface extruded from a fit-point spline is one B-rep face per span,
joined by hidden seams; the viewport picks and highlights it as one face
(Mesh::surface_patch). sketch.intersection_curve turned a face pick into
the single nearest face, so the curve stopped at that span's ends.
project3d::mesh_of now returns the picked face's surface patch and
mesh_intersection keeps the triangles of every face in it. Body sources
and Project to Surface are unchanged.
* claim: #10306
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Language: a Chinese system tag goes by its script, then its region (#10306)
macOS lists its languages with a script (zh-Hant-TW), which no catalog
matches exactly, so the base zh (Simplified) was picked for a Traditional
Chinese system. Hong Kong and Macao tags got Simplified the same way.
A Chinese tag now picks zh-TW for the Hant script, zh for Hans, and
without a script zh-TW for the TW, HK and MO regions, zh otherwise.
Other languages keep the exact tag, then the base language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: sectiontilt
* Section Analysis: tilting the plane no longer rebuilds the outline index every frame (#10373)
The section outline cut through an index of slabs along one normal, rebuilt
whenever the normal changed: tilting a Section Analysis rebuilt it every
drag frame (about 0.15 s on a 2.5 million triangle part). The index is now a
grid of cells holding each triangle by where its box sits, with the box
around each cell's triangles, so it serves every normal. It finds the same
segments, in the same order and to the bit, as cutting every triangle.
The viewport keeps one index per shown body mesh, no longer per normal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`sheet.perforate` takes an optional `sketch` (and `profiles`): the field's
outline. Holes go only inside its closed profiles, out of their inner loops,
`margin` clear of its edges, on a grid from the outline's lower-left corner.
On a folded sheet the outline maps through each panel the sketch lies on and
is clipped to it, so it never reaches a flange in the flat; a sketch on no
face of the sheet is refused. A mirrored copy mirrors the outline, and an
edit that names no sketch (the Perforate dialog has no outline) keeps it.
Without a sketch the field covers the whole sheet as before.
The feature saves `sketch` and `profiles`, a sheet's perforation its outline
in flat coordinates: one pending format note, no migration.
Assisted-by: LLM
* claim: #8822
* Tangent Plane: line it up with a reference plane, at an angle (#8822)
`construct.plane.tangent` takes an optional `reference` (a plane or planar
face) and `angle`. On a cylinder, cone or torus the plane touches where the
face turns towards the reference, turned by the angle about the face's axis,
on the side of the pick; on a sphere it is parallel to the reference. The
plane follows the reference when it moves. The Tangent Plane dialog gets a
Reference plane input and, once one is picked, an Angle field; editing the
plane brings both back. Saved as a pending format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9074
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* OBJ export: welded as STL and 3MF are, so a curved body opens again closed (#9074)
The OBJ writer joined vertices only when their coordinates were equal bit
for bit, but each face of a curved body writes its edge points again a few
ulps apart, so neighbouring faces shared no vertices and the file reopened
as an open mesh with no volume.
It now welds each body as the STL and 3MF exports do (threemf::weld_tagged,
with the same tolerance), and every corner keeps its normal: the normal of
the original corner it came from, or for a point a side was split at, the
normal interpolated across the triangle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Ambient occlusion: the radius follows what the frame draws (#9327)
In an empty design the radius came from the model's box, which is empty, so a
preview got the smallest radius and the depth map's precision showed as specks.
It now comes from the box the depth range uses, and with nothing to draw there
is no occlusion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ambient occlusion: the term drawn once and blurred by depth (#9327)
The lit pass worked the term out for every fragment it shaded, under a pattern
that changed from pixel to pixel, which read as grain. The term now has its own
texture, drawn once for each pixel of the prepass, with a fixed 4 x 4 pattern, and
a 4 x 4 blur that keeps to each pixel's plane takes the pattern out without
crossing an edge. The lit pass reads the result. The prepass and the term share
their pipelines and draw walk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9373
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline folders: editing a feature in a folder leaves no stale id, and such designs open again (#9373)
timeline.redefine runs the edited feature's command on a scratch copy with the marker just after
the feature, and takes the new definition from the feature that run makes. Inside a timeline
folder that trial feature joined the folder too; it was removed from the feature list but not
from the folder, and its id, handed back, was the next feature's. Each edit left that id in the
folder (the same one, edit after edit), naming no feature or, once a later feature took it, a
feature twice, and the reader then refused the design: "damaged design: invalid feature in a
timeline folder". The trial feature now leaves the folders as it leaves the feature list.
The reader drops a folder entry naming a feature or joint the design doesn't have, or one a
folder already holds, and opens the design: folders only group the timeline, so nothing else is
lost. A folder damaged in itself is still refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Report focused keyboard ownership from the shared text editor, matching the other Preferences fields. Regress real Name-field typing, focus retention, unchanged search text, and saving the resulting profile.
A mirror of placed bodies follows its source, so each frame of a drag evaluated
it and made new copies with empty mesh cells. A reflection can't share its
source's triangles, so every copy was tessellated from nothing, and so was
anything an evaluated feature after the mirror made.
Keep the first copy of a body with its source: each later copy is a proper rigid
move of it, so a world state draws them from one set of triangles. The model
keeps each copy's own lazy mesh. A feature evaluated again that gives the same
solids (an import) keeps its meshes.
A mirror of placed bodies no longer searches its copies' revolved faces when no
later feature can build on bodies. That depends on the design alone and is part
of the mirror's placement digest.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Since #10183 the app follows the system's language, and the tests followed it too, so a test
naming an English word failed on a PC set to another language. CI's runners read as English
and never saw it. In tests the system's language is now English: `cfg!(test)` for this crate's
own tests, as the engine's folders do, and the harness for the tests outside it. The preference
stays `system`, and the app is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: 10368
* Web offline test: each copy of a real build gets a file of its own (#10368)
With --site, the six builds were copies of one real build that differed
only in index.html. The overlapping-downloads step holds back the files
the next build lacks, so nothing of v5 was held: its download finished
before v6 launched, v6's worker then retired and deleted it (correctly,
no page used it), and the step waited 240 s to see it complete.
Successive deployments differ in more file names than that (Trunk names
files after their contents). Each copy now gets own-<build>.txt, like
the stand-in's build-named script, so v5's own file is held as the step
intends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Typing a parameter's name now lists every parameter whose expression
uses it, and a value finds the parameter that holds it. The filter
still reads names, comments and groups, and a text parameter's text.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A straight line of another sketch, picked into the Project dialog, came
in as a named sketch curve, which the projection preselection did not
know: it refused with "select geometry or bodies that can be projected"
although the OK button was live. The same reference the external pick
stands for is now made for it, so the line projects (#10291).
Co-authored-by: vdirienzo <vdirienzo@users.noreply.github.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* wip: the diagnosis of #10181 (the bug reproduces on current main)
sketch.project has .enabled(in_sketch) (crates/engine/src/cmd/sketch_project.rs:24)
and in_sketch (crates/engine/src/cmd/mod.rs:285) answers 'no sketch is being edited'.
Pressing P outside a sketch goes keymap::press -> sketch_tool_for
(crates/ui-egui/src/keymap.rs:451-457) -> app.start("sketch.create") with
d.then_start = Some("sketch.project"): the sketch IS created, but the Project
dialog opens and the command is refused, so the dialog shows the red row and the
'Create Issue...' button, which opens the Report a bug form over the viewport.
The probe here reproduces the bug on the CURRENT main (two variants). It is a
diagnostic probe, not the regression test: it must be replaced before a PR.
* test: a context error offers no Create Issue button (#10181)
The Project panel showed the red row for a CONTEXT error ('sketch.project is not
available right now: no sketch is being edited') and offered the 'Create Issue...'
button, which opens the Report a bug form over the viewport. A context error is
not something to report, so the panel must not offer it.
RED: the test fails with the exact message of the issue.
* fix: a context error is not something to report (#10181)
The Project panel offered "Create Issue..." for the error the engine
raises when the command is not available in the current context
("`sketch.project` is not available right now: no sketch is being
edited (Create Sketch or Edit Sketch first)"). That refusal is guidance
about the context, not a failure of the design, so there is nothing to
report: ending the sketch under an open Project panel should not invite
the user to file a bug.
error_rows already spared the missing-pick errors ("select ...", "pick
...") the same way. It now spares the context refusals too, using the
engine's own kind rather than the message text: CommandSpec gains
disabled_refusal, which is the engine's own Disabled refusal for the
command in the current session, and the UI matches the dialog's error
against it. A real failure of the command (an invalid face, say) still
shows the red row with "Create Issue...".
* style: rustfmt the test of #10181
The formatter joins the two asserts of the test onto one line (the
repository sets max_width = 150 and use_small_heuristics = Max). The
tokens of the file are unchanged: the diff is the line breaks of the
asserts and nothing else.
* Angle fields: a decimal point typed into an angle stays (#10582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Angle fields: a decimal point typed into an angle stays (#10582)
Edit Canvas applies its Angle box at each keystroke and keeps the angle
in radians, so the box gets back a hair off the value it set; egui's
DragValue takes that for a change made elsewhere and rewrites the text
being typed, dropping a decimal point just typed (-3.7 became -37).
angle_field now hands the DragValue the value it set while the value it
is given is within 1e-9 of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a4d9c31c jyviko: Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
- 303111e4e jyviko: Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
- c5332faf4 jyviko: Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
- 970446dec jyviko: Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 72109054c jyviko: Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
- f87305648 jyviko: Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
- 75efb8f0c jyviko: Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
- 68c3ccb75 jyviko: Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653)
The Tangent Arc tool took any first click as its start; a click on a
line between its ends snaps to a place that is no point yet (on:l3:...,
mid:l1), and the second click then failed with "unknown sketch point"
naming that internal reference.
The tool now refuses such a first click at once, with its own hint as
the error, asking the command's rule (tangent_arc_starts_at, factored
out of arc_tangent: the picked point or one at the same place, and a
drawn curve leaving it). The command refuses a snapped start with its
existing message that start must be the end point of a line or arc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Tests: the autosave scenario crashes once its autosave has landed (#10690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the autosave scenario crashes once its autosave has landed (#10690)
s25_autosave_recovery 'crashed' right after the extrude; under load the
autosave of it, written on a worker thread, had not landed, so the next
launch recovered the earlier autosave without the body (step 16).
The harness's crash restart now runs frames, bounded, until the active
autosave has caught up (Autosaver::caught_up: no write running and the
last autosave holds the design as it is). The app's own ticks still do
the writing, so an autosave that stopped writing still fails the test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9087
* Control channel: report the dialog as data, the open windows, and what ui.start opened (#9087)
`ui.inspect.dialog` (and `ui.editFeature`'s reply) was the dialog's Rust Debug text, which
changed with every refactor and couldn't be parsed. It is now an object: the dialog's command,
title, the feature an edit rebuilds, its selection inputs, its error, and the commands OK runs
(or what it waits for). `hover` in `ui.inspect` and `ui.selection` is a selection-like item
instead of Debug text.
`ui.inspect` gains `windows`: the tool windows open beside the model (Parameters, Bill of
Materials, Design Properties, Sketch Report, material card review) by the command that opens
each, and the Help menu's (About, Updates, Shortcuts, Crash Reports, Report, Messages) by their
`ui.help` item. Before, an agent couldn't tell these windows were open.
`ui.start` and `ui.editFeature` reply with what they opened (tool, dialog, windows), the status
line, and `pending` when the start waits for the history and opens on a later frame.
Scenario `dialog` checks match words of the dialog's state from the app directly, so the
scenario files are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10675
* agent chat: Copy message on each sent prompt and assistant text block (#10675)
A visible Copy message button on each copyable transcript message and a
right-click menu with the same action. Assistant replies copy their
original Markdown, prompts copy the text as entered; picture-only prompts
and thoughts get no action. Hover-only message areas keep partial text
selection working.
* agent chat: complete Copy message locales and tests (#10675)
* agent chat: route the message copy menu through ui_kit::Container (ui-containers gate)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Sketch: Remove Spline Point takes one fit point out of a spline (#10783)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Remove Spline Point takes one point out of a spline (#10783)
sketch.spline.remove_point takes one fit or control point out of a
spline. The spline keeps its id and runs through its other points, which
stay where they are. The point goes with the constraints on it, unless
another curve uses it. A closed spline's closing point, an end joined to
other geometry, the last 2 points (3 when closed), and projected, offset
or patterned splines are refused with a message.
The right-click menu of a spline point, picked alone, offers it beside
Reverse Spline Direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10703
* Sketch: do not tie expression-placed points to the origin with an automatic Coincident
A point whose coordinates are parameter expressions follows those
expressions. When they came to 0 at draw time the point landed on the
origin and connect_points tied it there with a Coincident, exactly like
a snapped click; the next parameter change then conflicted with the tie.
connect_points now skips points that carry exprs; plain-number points
keep the snap.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Face names: one name on two bodies is no split face (#10699)
A hole placed on the top of one of two bodies an extrude made, or on a
piece of a split body, warned "face `F2:top` was split; using the piece
nearest the picked point": the face name is on both bodies, and any
name found more than once counted as split. A name on several bodies,
one face on each, now finds the face the point lies on without the
note; pieces on one body, or a point on none of them, still say split.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: look for a face name shared by two bodies on the body the point is on (#10699)
The lookup over every body counts a name on several bodies as split on
purpose (a copy's face is not a piece of the source's, see
`the_same_face_on_a_copy_is_not_a_piece_of_the_named_bodys_face`), so
the first change, which made it unique there, is undone. A hole whose
face name is found split while its point lies on one of those faces now
looks again on that body alone: one face of the name there is the face,
whole; pieces on that body still say split.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The residual of a length dimension is the magnitude of the distance between
the line's two ends. At zero the magnitude has no derivative, so the rank
analysis read the constraint as if it were not there and the sketch reported
a degree of freedom that was not there.
At zero the two ends of the line meet, so the residual says it with the
vector between them, the way a coincidence does. That is the treatment a
distance of zero already gets (upstream #4397); the length family was left
out of it.
Regression test: crates/sketch/src/tests.rs, zero_length_keeps_the_line_constrained.
Co-authored-by: Homero Thompson <homero@local>
* claim: #8266
* Computing toast: a Cancel that gives up on the move (#8266)
The Computing toast for a history command (marker move, undo, redo,
suppress, reorder) or a delete's check computing off the window thread now
has a Cancel button. It drops the job and the commands queued behind it;
the design stays as it was, since a deferred command only runs for real
once its evaluation is in. A feature edit applying keeps its dialog's own
Cancel, so its toast shows none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10620
* widen dialog form-card label columns to the measured label width (#10620)
* fix compile of the grow tests
* grow the card only past the label cap and tag the form scope in place (#10620)
* keep scope_grow crate-internal so the gallery scan stays element-only (#10620)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #10510
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Sketch: dragging a centre rectangle's constrained centre point keeps the rectangle's size
A centre rectangle's centre sits on the middle of its diagonal, and a
press there picked the diagonal's midpoint before the centre point. The
drag then took the diagonal by its middle: with the centre free the
rectangle moved along, but with the centre held (on the origin, on a
line) the diagonal turned and stretched about it, and the rectangle
grew or shrank with the pointer, many times its size.
A drag that starts on a line's middle where a point is held by a
Midpoint constraint now drags that point, as a drag that starts on the
point does. A centre held on the origin stays there and the rectangle
keeps its size; a centre on a line slides the whole rectangle along it;
a free centre still moves the rectangle. Clicking the middle still
selects the line's midpoint for constraints.
Fixes#10510
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
With a section on, Slice in the Sketch Palette lit up but the model was
still cut only by the section: the viewport took the sketch's plane only
when there was no section. Slice now takes it whenever it is on in the
sketch being edited; the section comes back when Slice is turned off or
the sketch closes. A slice is hatched as it is without a section.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5cd5f303 jyviko: Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
- ea49dff48 jyviko: Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
- 38385ab5d jyviko: Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
- 459937e52 jyviko: Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #10874
Co-authored-by: Cursor <cursoragent@cursor.com>
* Insert drawing: name the sketch size cap when a file is too dense (#10874)
A large SVG/DXF failed with opaque \"sketch is too large\". Say the 20000 point/curve limit and that scale alone does not reduce entity count, and refuse dense drawings before adding them.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
`face_of` called `Body::faces`, which tessellates the whole body, on every
solve. Face origins went through the cached `ModelBody::joint_faces`, at
the same tolerance, but edge origins never did, so one edge origin on a
large body cost a drag or a Drive Joints step far more than the solve.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9874
* Add shared Preferences cards, figure painters and gallery entries to ui_kit
* Preferences: Arabic, Hebrew and Vietnamese carousel labels
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Use the app's selection colours in the Preferences cards
* Measure Preferences figure inks and use shared palette metrics
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A corner dialog copied the preview's error into its own, where nothing
cleared it when the preview recovered. The dialog already shows the
preview's error, so the copy is gone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 9f64cce54 brett19: solidcore: a variable-radius fillet is refused until solidcore builds the union of its balls
- bd4dc081d brett19: Known failures on solidcore after the merge: the refused curvature and variable rounds, develop's new cases
- c6fa7e563 brett19: Move the solidcore pin to c9a06dc7c
- de9a654db brett19: Turn on solidcore's new fixes at c9a06dc7c
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Tests: io's byte mutator moves to a testkit crate, a dev-dependency only (no behaviour change)
`solidcraft-testkit` (the Testkit class xtask/src/layers.rs reserves) holds the mutator and the
no-panic check unchanged: the same seeds, mutations, budget and doc comment. io's reader fuzz
tests use it as a dev-dependency and give the same case counts; the mutator's own test moves
with it. The co-editing wire's decoders will fuzz with it too (#5184, CE6).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cargo.lock: testkit at the workspace version
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A pull request outside crates/kernel, crates/geom and vendor/truck* is no longer labelled for a
kernel word in its title. Issues and discussions keep the title check.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7481
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Coil: step arrows on the Revolutions field (#7481)
The Coil dialog drew Revolutions as a plain expression row, the one
count without the step arrows the pattern quantities have. It is now a
count row from 1 to 200 turns (the helix's limit); a fraction still
types in, and an arrow steps it to the next whole turn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A chamfer's warning quoted the full generated names of fourteen split edges,
122,701 characters (#8541). Names over about 80 characters are now quoted by
their first 48 and last 24 characters.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Offset Plane and a cosmetic Thread have no live preview, so their edits' OK ran on the window
thread and recomputed every later feature there. Any edit now goes through the off-thread
transaction. The editor's pinned original is used only while the dialog previews, as
open_feature_edit keeps it: a Thread switched from Modeled to cosmetic edits the design as it is,
so a body hidden meanwhile doesn't refuse it as a changed design.
* claim: #4986
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Press Pull on a chamfer's face changes the chamfer's distance (#4986)
A chamfer's face is flat, so solid.press_pull and the Press Pull start
path in the UI took it for a planar face and extruded it. Both now look
for a fillet's or chamfer's face before asking whether the face is
planar, so a chamfer's face reopens the chamfer and its distance grows
by the distance pulled, as a fillet's radius already does. A first pick
with Press Pull already open is routed the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Press Pull on a blend face puts the arrow on the edge clicked
A fillet or chamfer reopened by Press Pull from one of its faces drew
its radius or distance arrow on the feature's first stored edge, which
can be a corner the user did not click and cannot see (the Sample
Plate's fillet, from the far corner). The click's point now goes with
the reopened dialog as a hint that is never saved, and the arrow sits
on the feature's edge nearest it, at the point on that edge nearest the
click. Opened any other way (the history, Edit Feature) the arrow stays
on the first edge as before.
A click point that is not finite is not kept, and a point on a flat face next to a chamfer still extrudes that face (tested).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The live preview of extruding a picked face built its walls from the
face's display triangles and drew a line up the wall at every boundary
point, each wall piece shaded flat. A round face (the Bolted Flange's
flange) looked like a polygon while extruding. Lines now go up only
where an edge of the face ends and the outline turns there more than
its curves do, and a wall's normal turns with it between smooth pieces.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Colour popover: a held step button keeps stepping, and R, G and B have tooltips (#10201)
The step buttons beside each colour number sensed clicks only. egui
stops counting a press as a possible click once it outlasts its longest
click (0.8 s), so the held button stopped repeating after 8 steps. They
now sense drags too, which keeps a long press down on the button until
it is let go.
R, G and B now carry tooltips (Red, Green, Blue) as H, S and V already
did: a single letter doesn't name the colour in every language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Colour popover: the R, G and B tooltips in Vietnamese too, a complete catalog (#10201)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: reference Distance shows the document precision (#10693)
A measured reference distance showed the raw float (10.000000868569572 mm).
The field now reads at the document's length precision while Refs keeps the
measured value for the model, so OK still sends what was measured.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* Hole: restored literals use the document precision (#10693)
Round every literal reference distance on Edit Feature, including comma
decimals and exact whole values; expressions stay as written.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* ui_kit: search_picker, a filtered dropdown with a custom entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: endpoints list their models with names, say when listing fails, and OpenClaw and OpenRouter presets (#2582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: a typed model goes to endpoints and to agents that offer a model option
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the header's model pickers search and take a custom model
The popup can't grow once it is open, so search_picker now fixes the height of what changes below
its box when it opens: the custom row or a late list could otherwise end up out of reach.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AI preferences: pick an endpoint's model when adding it and on its card (#2582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: model picker rows read from the left, and a refused typed model says which
From running it: list_picker centres its text, which reads badly for a long list of ids, and an
agent's own refusal can say no more than "Internal error". The search box also asks for a repaint
while it waits for the focus, so an idle window does not stop short of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: docs for the model picker
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: an endpoint's answer that is no model list says so, an empty list too, and editing lists with the kept key
A 200 without a `data` array (a web page where the endpoint should be, as OpenClaw's gateway
serves until its chat endpoint is enabled) was cached as a successful, empty listing, so the
picker stayed blank with nothing to say and never asked again. Now it is an error with its own
note, an empty list says so, and both are asked for again the next time.
The Edit dialog lists its endpoint's models when it opens, with the kept key read from the
keychain on the listing's thread, as the card does; the key stays out of the field.
The method-not-found test expects the refusal notice that names the model, as every refused
model gets since this branch.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: models from several providers fold under their providers inside the picker
As Chemiseblanc does in #10187: with two or more groups, `search_picker` draws each group as a
header with a chevron, the name and how many of its choices are listed, and a click folds or opens
it. Before anything is typed only the current value's group (and the one the caller asks for) is
open; a group with a match opens once something is typed; a fold made by hand stays until the popup
closes. Enter takes the first row shown, so never one folded away. A lone group keeps its plain
heading.
The header's model picker feeds its providers in as groups, so the separate provider drop-down
goes; the control channel's `provider` now says which group opens first. A header click gives the
focus back to the search box, so typing goes on filtering.
The dialog's listing test checks what kind of listing it got rather than translated words, which
the listing thread may render in another language than the test's.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: rustfmt the provider groups
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: an endpoint's models named `Vendor: Model` fold under their vendors
OpenRouter lists `openai/gpt-6.1-terra` as "OpenAI: GPT-6.1 Terra". A listing whose ids read
`vendor/model` and whose names read `Vendor: Model` now names its providers, so the picker folds
it under its vendors like a multi-provider agent; the rows read the model's name, and the id stays
in the tooltip and in the search. An agent's own `Provider: …` word still comes first. One vendor
is one flat list, as before.
The Add dialog's picker has no current model to prefer, so with nothing to prefer every group
starts open; folding is a click away.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce8b01fa3 jyviko: Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
- 78ed75162 jyviko: Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
- ee3ed66a4 jyviko: Kernel rig: two chains that now build graded by their exact volumes
- f2ff6f0d4 jyviko: Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
- snap_tangent_arcs : chaque extrémité d'arc prend la ligne la plus proche
- une ligne ne prend qu'une extrémité d'un arc ; l'autre passe à sa ligne suivante
- une ligne plus loin sur le contour est ignorée quand l'extrémité touche déjà une autre pièce
- tests : 4 unitaires (project_order.rs) et the_silhouette_of_conic_rounds_closes
Co-authored-by: P'tite Tête <asso@ptitetete.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf51e62f7 jyviko: Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
- cde8be4a1 jyviko: Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
- 155f1f470 jyviko: Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
- 21f00a917 jyviko: Kernel rig: every fillet and chamfer case rounds its tangent chain
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e8caa1e91 jyviko: Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
- 60393a718 jyviko: Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
- 6ba069d06 jyviko: Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
- e24eb7789 jyviko: SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 02de15f90 brett19: Move the solidcore pin to 9fb13f145
- 09b646005 brett19: Turn on solidcore's new fixes at 9fb13f145
- c494a18f9 brett19: Rig: the reimported peg's rounds fail as the peg's do
- e9ac0e606 brett19: solidcore: a curvature fillet is refused until solidcore has the equal-area Gⁿ section
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #1486
* Compare picture: overlap and edge offsets of the model against a reference picture (#1486)
inspect.compare_picture lays the model's silhouette over the part found in a
PNG or JPEG and slides it to the best overlap: overlap (0..1), the model's
edges against the picture's in mm at nine stations, and an overlay PNG. The
MCP tool compare_picture runs it and hands the overlay back as an image block.
inspect.silhouette grows a reusable silhouette::outline for the model side.
* chore: re-trigger checks (defaults line already present in PR body)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: carry the Compare Picture label in Arabic, Hebrew and Vietnamese too
The complete-catalog guard (every_complete_catalog_carries_every_english_message)
failed because the pending file covered only en/ja/zh; ar, he and vi are
complete catalogs and need the key as well.
* Compare picture: one uniform scale, capped fit, sturdier part finding
Review on #6416: fit no longer stretches the axes apart (width is the default,
both scales uniformly by width and reports aspect_mismatch); the fitted model
takes the same MAX_GRID cap as the picture; the border flood seeds only from
border pixels near the border's main colour, reads alpha, retries at a
stricter step, and says which case failed; the slide searches the whole
placement range instead of a tenth around the centre; the model's holes get
the picture's fill rule; crop becomes crop_px / crop_fraction with explicit
units. Pins #1486's bracket (overlap 0.865, bottom -10 mm at the upright) and
adds a regression test per problem.
* Compare picture: alpha only for a see-through border, part_fills_crop, outline-only wording
Review re-test on #6416: one translucent backdrop pixel no longer switches the read to
alpha — alpha decides only when most of the border is see-through, and any ink is then
part, so a part drawn at alpha 100 survives; part_fills_crop: true takes the crop box as
the part itself, for one view cropped tight off a board where the part takes most of the
border and the flood would keep the backdrop strip instead; a third backdrop pass compares
each pixel to the border's main colour, so a white part on (245, 245, 245) JPEG at quality
75 separates; the command, tool and docs descriptions now say the compare is outline only:
holes are not compared. A banded light backdrop stays a follow-up. A test per case.
* MCP compare: format the picture tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Render results: keep up to eight completed renders and select or discard them
* Render results: Live and render compare with a divider, and render all shots
* fix: use comparison theme tint and reveal reset test targets
* fix: restore Unicode expectations in render workspace tests
* claim: #6528
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lost GPU: the per-frame probe opens a command list, as the upload would (#6528)
On a reset D3D12 device the empty submission before a frame's uploads
went through (it only signals a fence), and the first queue write then
panicked inside wgpu-core (PendingWrites::activate unwrapping Lost).
The probe now submits a command buffer with a debug marker: finishing it
makes the same begin_encoding call, through a path where wgpu loses the
device and runs its lost callback instead of panicking. The picture
capturer's probe does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7159
* Measure: a fillet's torus or a sphere reports its radius (#7159)
The face of a fillet round a circular edge is a torus and a ball's face a sphere, which
Measure listed by area only. Their face item now carries radius, diameter and surface
(and the ring radius of a torus); they stay out of Shape, so distances are unchanged.
Fixes#7159.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #9111
* Preview: new surface is tinted whatever its size, and the tints can be turned off (#9111)
A preview decided which faces of a changed body were new surface by asking
whether their triangle centroids lay on the old body, within a tolerance that
follows the part's size. A round or chamfer small beside the part never leaves
that tolerance, so it was drawn as if it had always been there, and sampling at
a fixed step told alike faces apart by nothing but how many triangles they had.
The kernel already records which faces an operation generated, so `build` takes
that record alongside the geometric test. The test stays because a body carries
the history of whatever last made it, which is not the previewed operation when
a parameter change re-evaluates the design: the record only ever adds faces to
the answer. The vote itself now asks about every centroid of a small face,
spreads a large face's samples without a resonant step, and calls a face new
above an eighth of its samples, which a blend tangent on both of its sides
reaches with the one row of facets in five that is clearly off the old surface.
Graphics gains two settings, both on as they come, so nothing changes out of
the box: Tint new surface in a preview draws a changed body as itself when it
is off, working out no face at all, and Show removed material in red leaves the
see-through cut and the ghost of the shape a feature replaces fully
transparent, drawing only their outlines.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* claim: #9084
* Edit Extrude: close on the first Escape (#9084)
An edit dialog whose value names a parameter (`T` in Edit Extrude) opened with
that field focused and its completion list showing the longer names (`tan(`),
unarmed. The list took the first Escape, so the dialog needed two.
An unarmed list now leaves Escape to the window until the box is typed in, as
it already leaves Enter and Tab; once typed in, Escape dismisses the list first
as before. Its hint drops "Esc dismiss" in that state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9827
* Sketch Offset: an Instances count stacks offsets one behind another (#9827)
Offset made one offset at a time, so a set of evenly spaced outlines meant
running it again on the curves it had just made, once per ring: a separate undo
step and a separate driving dimension each time.
`sketch.offset` now takes `instances`, a whole number or a unitless expression
from 1 to 100 (1, today's behaviour, by default). The per-group work the command
did inline becomes `offset_rung`, and `offset_ladder` runs it once per instance,
each rung offsetting the one before it the same distance again, so instance n
stands n distances from the curves picked. Every rung of a side is driven by
that side's own dimension, so editing it moves the whole set and keeps the
spacing even, and each side of a Two Sides or Symmetric offset grows its own
ladder. A rung the shape has no room for refuses the whole command and names
which instance it was.
A later rung reads its side from the geometry, through the rung's own
normal-distance annotation, rather than from the distance's sign: an output's
stored ends need not run the way the chain through them is walked, and a
reversed walk reads the same sign as the other side. A circle is the exception
and keeps the sign, because it offsets concentrically with no chain to walk, and
a step past a ring smaller than the distance lands beyond the centre, where the
circle's "outside the current radius" side test reads as the outward side: an
inward ladder turned round and grew again (1, 4, 1, 4 mm) instead of running out
of room.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Sketch Offset: the Instances row in the offset window (#9827)
The offset window gets an Instances row under Distance: a whole number with step
arrows, 1 by default, so the count can be walked up a ring at a time and the
preview follows each step. The count is not kept in the design, as Mirror's and
Scale's values are not, so the window sends the number it evaluates to rather
than the text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* UI kit: a count's step arrows are not text (#9827)
The arrows stand inside the editor, which asks for the text cursor across its
whole rect, so hovering one showed an I-beam and the arrows read as part of the
number. They take the ordinary cursor back after it, and the pointer is read
from the arrow's rect rather than from the hover the editor underneath competes
for, which keeps the hover highlight in step with it.
The pattern Quantity rows share this field and had the same thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Sketch Offset: Instances label in the complete catalogs and the other shipped languages
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Offset Instances: translations for the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9873
* Add the Preferences design reference: pages, figures, measurements, tokens
* Fix the selection look in the design reference to match the app
File › Export STEP…, STL…, 3MF…, OBJ… and URDF… were UI actions around
the shared file.export, so Keyboard Shortcuts had no row for them.
file.export_step, _stl, _3mf, _obj and _urdf now do what those items do
when started from a key, command search or the menu (a save picker; Save
As Mesh for STL and 3MF), and take a path when called with JSON. The File
menu shows their keys. Each has a contract and a reply type
(schema/file.rs).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- a1b4119c3 brett19: Turn on geometric_g2_continuity: 2992's slowdown is gone
- f2ce343a0 brett19: Known failures after the new fixes: four tests and a rig case pass
- b57c24f7f brett19: Known-failing tests: the tabbed plate cites solidcore#2223
- 0aff35705 brett19: Merge fix: solidcore reads planar sheets without SMLib, so their edge reader is always built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #10600
* Sketch: a value box must not swallow a click that lands on a sketch point (#10600)
The construction line tools' Length box waits beside the pointer. When the
pointer reaches the reference line's own endpoint it can land under that box
(the box is anchored to the tool hover, which freezes while the pointer rests
on the box), and the box's text edit takes the click, so the tool never sees
it. A release over the tool's own value box or construction/normal switch that
lands on a snapped sketch point now goes to the tool; a click on the box away
from any sketch point still edits the box.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: Assemblies: use lookup maps when building the world state
* Assemblies: use lookup maps when building the world state
world_state_reusing, made again after every geometry command in a design
with components, filtered all bodies for every placement, searched the
timeline for every sketch and construction of a placed part, and searched
all bodies twice per tap and placement. It now builds the feature to
component map, the bodies of each component (in body order) and each
tap's component and body offset once per call. The result and its order
are unchanged.
On a 100-part assembly placed 5 times (800 sketches, 200 taps) one world
state drops from 124 ms to 9.5 ms (release, median).
A test-only counter of searches through all features or all bodies
checks that the work no longer grows with the sketches and taps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A join, cut or intersect without explicit targets reads where every body
of its component is placed. Its placement digest searched the model for
each of those bodies by name, then the timeline for its component and the
placements for that component's frame: O(B^2 + B*F) per feature, on every
evaluation, also when every feature comes from the cache.
The bodies, their components (Document::model_body_components) and each
component's frame are now looked up once per digest. The bodies are still
hashed in name order with the same values, so every digest stays the same
bit for bit and saved caches stay valid.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10393
* Per-component History hiding: flag, commands, Browser menu, bar toggle (#10393)
* Carry the new History-hiding strings in the complete catalogs (#10393)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Sketch: a construction line with a length can be a normal line (#10258)
`construction: false` on a construction line command that has a
`length` makes the segment a normal sketch line, ready to close a
profile, instead of construction geometry. The default stays
construction, and an infinite line is always construction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a length box in the construction line tools (#10258)
The horizontal, vertical, parallel and perpendicular construction line
tools show a Length box beside the pointer from the start. It stays
empty (shown as infinite) and leaves the keyboard to the tool's
shortcuts until a digit is typed; then the box takes the keyboard.
Without a length the tools work as before: one click, an infinite line.
With a length the first click sets the start and a second click the side
the segment runs to, sent as the command's `length` and `near`, so the
segment gets its length dimension. The angle tool has a Length box
beside its Angle box. A typed length keeps the start's snap, and the
preview draws the segment the click will create.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a construction/normal switch in the construction line tools (#10258)
A Construction | Normal switch sits under the Length box of the
construction line tools. Normal sends `construction: false`, so a
segment with a length becomes a normal sketch line, ready to close a
profile, without converting it afterwards. The switch starts at
Construction with each start of a tool. An infinite line is always
construction, so without a length the switch is greyed out and its
tooltip says why. It belongs to the tool alone: the Sketch Palette's
drawing line type (X) is left as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- fb851d9c2 brett19: Known-failing tests: main's four tests that fail on solidcore as on C++
- 6de10a7fb brett19: Model cache test: say why it reaches the C++ kernel
- 84bca5969 brett19: Move the solidcore pin to c931c9641
- e1b76bdfc brett19: Turn on solidcore's new fixes at c931c9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: Sketch drag: drop the second document copy per frame
* Sketch drag: drop the second document copy per frame
edit_solved copied the document to edit it, then stored it with
`*s.doc_mut() = doc`. The command's undo snapshot still holds the old
document, so doc_mut copied the whole design a second time only to
overwrite it. Store the edited document with Session::set_doc instead,
which forgets the same caches and puts it in a new Arc. The design lands
at a new address as before and the command's end records it for the
crash journal (#7502).
A live drag frame on a design of 200 sketches (20k curves) drops from
19.2 ms to 9.4 ms; 50 sketches: 2.3 ms to 1.7 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Move: say a part's joint conflicts instead of 'no movable joint axis'
* Move: say a part's joint conflicts instead of 'no movable joint axis'
When a joint of the selected part conflicts with the others (the solver
can't close its loop), Move found no axis and said "This part has no
movable joint axis.", pointing at joint types and limits. It now names
the conflicting joint and suggests editing, suppressing or deleting it.
Parts with no free joint value and no conflict keep the old message.
Refs #10331
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10484
* Sketch: Intersect can pick sketch lines and model edges (#10484)
The Intersect dialog only took faces or whole bodies, so a click on a
line of another sketch (the sides of a rectangle crossed by a plane
through its middle) picked nothing, although sketch.intersect already
cuts edges and sketch curves with the sketch plane. The pick list now
takes faces, edges and other sketches' curves, and the selection filter
reads Geometry | Bodies like Project's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10471
* Show given names in bidi display order; find RTL prefs labels typed in reading order (#10471)
crate::bidi ran over catalog text only, so a multi-word Hebrew or Arabic
body name showed its words left to right in stored order, and Preferences
search compared display-order labels against reading-order queries.
given_name now returns right-to-left names in display order (browser rows,
tabs, status bar all draw names through it), and text_matches also scores
the query after the same bidi transform.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Configuration rules: Then says it lists only the table's columns, and how to add one (#10532)
A rule drives or restricts a column of the table only, so Then leaves out a
feature without a Suppress column or a parameter without a column, where
When lists them all. A note under the list now says so and points at Add
Column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration rules: the two notes in the complete catalogs (Arabic, Hebrew, Japanese, Vietnamese, Chinese)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: View: work out consumed sketches and hidden bodies once per revision
* View: work out the sketches features use once per design
Each sketch_shown call walked every feature of the design to tell whether
the sketch is used, and the viewport asks about every sketch several
times a frame. The used sketches are now gathered into a set once per
design (keyed on the design itself, so any edit reads them again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* View: look hidden bodies up in a set
body_visible walked the hidden-bodies list for every body asked about, and
the viewport asks about every body several times a frame. The hidden
bodies now join the hidden joints and folders in the view's visibility
index, built when the list changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: View: work out consumed sketches and hidden bodies once per revision
* View: work out the sketches features use once per design
Each sketch_shown call walked every feature of the design to tell whether
the sketch is used, and the viewport asks about every sketch several
times a frame. The used sketches are now gathered into a set once per
design (keyed on the design itself, so any edit reads them again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Canvas: store reference image data as shared text so edits stop copying it
* Canvas: store reference image data as shared text so edits stop copying it
Every edit clones the document, because the undo history still holds the
old one, and the canvas image was a plain String: each of the up to 200
undo states owned its own copy of the base64 text. Canvas::data is now
Arc<str>, like the shared STEP text, meshes and point clouds; serde's rc
feature writes it as the same JSON string, so design files stay byte for
byte the same.
A 4.2 MB image with 250 edits: peak memory 1.09 GiB -> 42 MB, run time
1.16 s -> 0.12 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: a folder that holds only a new group shows it (#10526)
New Group from the root's context menu made an empty group in the Bodies
folder, but the Browser draws no folder without items, so in a design
with no bodies yet nothing appeared. A folder that holds groups is now
drawn with them, even before anything is in it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: test that a new group in an empty folder shows and takes a dragged body (#10526)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Extrude dialog: work out the automatic operation once, not every frame
* Extrude dialog: work out the automatic operation once, not every frame
An open Extrude window with the automatic operation on asked the engine
for `auto_operation` every frame. That probes the bodies with
`Mesh::contains`, rays through every triangle, so a large part cost tens
of milliseconds per frame with nothing changing.
The window now keeps the answer with a key over what it depends on: the
extrude's parameters (participants included), the design's revision and
id, and the active component and occurrence path. The latch still runs
every frame as before.
Open Extrude over a 1M-triangle mesh body: 29.8 -> 0.87 ms per frame
(headless harness, median of 3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Extrude dialog: keep the taper limits while the profile is unchanged
* Extrude dialog: keep the taper limits while the profile is unchanged
The taper handle is drawn every frame while the extrude window is open,
and every frame it worked out the inradius of each picked profile and of
each of its holes: a grid search over every side, about 200 ms a frame
for a plate with 64 round holes. Only the height changes between frames.
The radii are now kept in the window's state with the profiles they were
worked out for, and worked out again only when the profiles differ. The
limits come from the same arithmetic, so they are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10016
* Sketch: a Line chain survives Undo (#10016)
Undo could take away the segment the chain was drawing on from, and every
further click was then refused with "unknown sketch point". The chain now
remembers where each segment started and goes back to the last one still there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Raytracer: map faces to looks once
* Raytracer: map faces to looks once per body
Preparing a body for the CPU raytracer walked the body's face look list
one entry per work step for every triangle, so a body cost T x (F + 1)
steps (each through the job host) instead of T. The face looks are now
sorted once per body, keeping the first entry per face as before, and
each triangle finds its look with one binary search. Pixels are
unchanged; with 10 000 faces and 50 to 500 face looks, preparation
drops by 40 to 88 %.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Opening: validate the document once when a model cache is present
* Opening: validate the document once when a model cache is present
Opening a design that keeps its model parsed and validated document.json
twice: reading the model cache checked it before decoding the cached
bodies, and read_document, which follows straight after, runs the same
migrations and validation and fails the open when they fail. The open
path now reads the model without that check; geometry(),
read_design_geometry and the preview keep it. A broken document fails the
open with the same error as before.
3,000-feature design with its model cache, bench-open parse step:
426 -> 293 ms (median of 8, heavy machine load). Saving the opened
design gives a byte-identical file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10483
* ViewCube: an option to invert the curved roll arrows (#10483)
A new Navigation preference, "Invert the curved roll arrows"
(invert_curved_roll_arrows, off by default): with it on, the two curved
arrows at the cube's corner roll the view the other way within the
screen plane - the clockwise arrow rolls counterclockwise and the
counterclockwise arrow rolls clockwise. The sibling of the cardinal-arrow
inversion from #10286, which left these arrows alone.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: Mesh imports: compare by pointer before comparing contents
* Mesh imports: compare by pointer before comparing contents
MeshData derived PartialEq, so the dirty check and the autosave check
walked every coordinate and index of a scanned mesh after each edit,
although the document and its saved copy share the same arrays. Compare
shared arrays by pointer first and value by value otherwise, as Points
and Colors already do. About 1.9 ms per comparison for a mesh of one
million triangles goes to nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch: use a lookup map for curves in pattern upkeep
* Sketch: use a lookup map for curves in pattern upkeep
Pattern upkeep runs before every solve, each drag frame included, and
looked up every copy curve and its arc points with a linear search over
all ids. Dragging another line in a sketch with a 500-copy slot pattern
spent about two thirds of each frame there. The ids now resolve through
maps built once per call; the result is the same to the bit.
The solve bench gains a circular slot pattern section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hash sets for the stale-pattern check before each solve
The check whether a pattern lost a seed, copy or relation built three
ordered sets of all ids before every solve. Only membership is asked, so
hash sets give the same answer; a drag frame in a sketch with a 500-copy
pattern takes another third less.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch: use a lookup map for curves in pattern upkeep
* Sketch: use a lookup map for curves in pattern upkeep
Pattern upkeep runs before every solve, each drag frame included, and
looked up every copy curve and its arc points with a linear search over
all ids. Dragging another line in a sketch with a 500-copy slot pattern
spent about two thirds of each frame there. The ids now resolve through
maps built once per call; the result is the same to the bit.
The solve bench gains a circular slot pattern section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 15c5cd5d5 brett19: Known-failing tests: cite the solidcore issues now filed
- 462738b6a brett19: Known failing after the smlib merge: the r5 test-peg corner on solidcore, main's C++ test lines
- 4a98a1f8a brett19: Model cache: a saved model is its kernel's
- 9c2388ef8 brett19: Geometry kernel strings in Vietnamese, now a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Projecting a whole body fitted its outline from mesh edges: a round wall seen
edge-on has triangles leaning a hair either way, so the outline zig-zagged
between both rims and broke into two-point pieces (lines), and seams where two
faces' triangles don't share vertices counted as open, outline edges. Faces
that face one way all over (planes, cylinders and cones about the sketch
normal) now decide for all their triangles, near vertices are welded, and a
seam between two faces facing the sketch is no outline. A STEP hook went from
159 lines to 10 lines and arcs.
A single rounded or chamfered rim of a cut curved face is a spline that only
follows its circle; read as Bezier pieces it came in as twenty splines. An
edge read as spline pieces that stays on a circle within 1e-5 of its radius,
in a plane parallel to the sketch, now comes in as that arc.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: datum planes, axes and points, at exact distances
The Measure tool took faces, edges, vertices and sketch geometry; a datum
plane or axis could not be picked into it, and a point set of an infinite
plane or axis would measure the wrong thing anyway.
Describe origin and construction planes, construction axes and construction
points as items, accept PLANES, AXES and CONSTRUCTION_POINTS (and the origin)
in the Measure dialog, and give the new shapes exact closest points:
- a point and a plane: the perpendicular distance;
- a point and a line: the perpendicular distance;
- two planes: parallel distance, or zero where they meet;
- a plane and a line: zero where they cross;
- two lines: the skew distance.
The panel and the quick readout show a plane's point and normal, and an
axis's point and direction.
Test: a point 10 above the XY plane, 5 from the Z axis, and a plane and an
axis that meet.
* Select: a straight sketch line is a curve in an input that takes curves
Adding axes to Measure's input made a straight sketch line match the "axis"
rule before the sketch-line rule, so a picked external sketch curve became a
SketchCurve instead of the ExternalSketchCurve Measure records. The axis rule
now applies only to inputs that take axes on their own (Move's direction and
the like), not to inputs that also take curves.
Test: measure_input_fits_external_sketch_geometry, and the Move axis picks.
* rustfmt: format the new selection filter and measure code
* Measure: drop an unused normalisation in the skew-line distance
---------
Co-authored-by: clarkliu <277482660@qq.com>
* Frames: test that a renamed cut-off piece keeps its name in a rebuild from the features alone (#10438)
solidcraft-cli eval rebuilds a saved design without its saved model; the
rename made after a cut then lands on the first line's member. The test
reproduces it on main; the fix follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: a renamed cut-off piece keeps its name when the design is rebuilt from its features (#10438)
Since #10132 a cut's pieces past the first belong to the cut and the piece
that keeps the body's name to the body's own feature. Ordering the pieces
by their faces then moved the names among them but left each body's
feature behind, so the cut-off piece said the frame member feature made
it. body.rename stored its new name there, in the first line's slot, and a
rebuild from the features alone (solidcraft-cli eval of the saved file)
named member A after it. A name now moves together with the feature it
belongs to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With several bodies to send (after Add all bodies, say), the Print face
input refused every face. It took a print face only when exactly one
body was sent; any other pick was cleared at once, with a note in the
status bar only. Each body's print face then had to be set with Ctrl+B,
or by sending that body alone.
The input now holds the print face of each body being sent. A face
picked in it becomes its body's print face, in place of the one it had.
A click on a body's print face takes it out and clears only that body's.
A face of a body that is not being sent is refused with a message
(`ui.print_face_body_not_sent`, in place of `ui.print_face_one_body`).
Each change is still one `body.print_face` command, so it undoes on its
own. Picks in this window are no longer widened to the other pieces of
the face's surface, so a click on a print face takes it out rather than
adding its neighbours.
The user guide (guide/files.md) says so. The new message is in
assets/locales/pending/print-face-each-body.json, in all 31 languages;
the old one is removed from the catalogs.
Test: dialogs_save_mesh::tests::the_print_face_input_takes_one_face_for_each_body_sent
(fails without the change: the second body's face is refused).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01e2e939e jyviko: Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
- 7bba3092c jyviko: Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
- 0b1cc8a8c jyviko: Kernel tests: a spline radius whose balls fold over one another at its peak is refused
- 1745e5c38 jyviko: Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- afb55d806 brett19: One kernel flag: solidcore, the default, or smlib; routed is gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 3908128a8 brett19: Known-failing tests: refreshed from the default run at solidcore de85a3e00
- cd94f78f3 brett19: Rig: --route is gone; a run has one kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch: Break Link in the context menu of projected geometry (#10417)
Projected curves and points (model edges and vertices, another sketch's
curves) could only be unlinked through command search, although Trim and
other refusals say "use Break Link on it". The sketch context menu now
offers Break Link when the selection holds projected geometry; text keeps
Explode Text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test Break Link in a projected edge's context menu (#10417)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Features folders scrolled out of view skip their mark
A folded Features folder shows the worst error or warning mark of the
features it holds. Working that out scans the design's whole history, and
from 16 features builds a table of all of them: per placement, on every
frame, whether the row is on screen or not. In a long tree of placements of
a part with a long history this was most of the window's frame while
orbiting.
A row scrolled out of view paints nothing (`tree_row` only takes its space),
so its mark is now worked out only when the row is on screen, as the
placement rows already do for their own state. The rows on screen show the
same marks.
Refs #6083
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scale tests: time each frame of an orbit around a large design
`scale_tests::orbit_frame_cost` (ignored, manual) turns the view with the
right button over a design (a STEP file inserted as the app opens one, a
design file, or the generated assembly) with the model scene built, as the
app builds it once a renderer is there. Per frame it times the window
thread's frame and its named steps (`frame_watch`), egui's tessellation,
and the renderer's prepare, draw recording and GPU work on an offscreen
device (`OffscreenFrames::frame_parts`); without an adapter it times the
window thread alone. `painted` fingerprints the tessellated picture once
the view rests, to compare two builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On XZ a sketch's y runs along world -Z, so a value written as a height lands
below the plane; only the modelling skill's reference said so. The command's
parameter text now gives the axes of all three origin planes (XY: +X, +Y;
XZ: +X, -Z; YZ: +Y, +Z), and a test pins them.
Assisted-by: LLM
`component.insert_design` links a design saved as a .sc container or as plain
JSON (`.json`), but `component.relink` refused every path that was not a
container ("choose a saved .sc design"), so a component linked to a JSON
design could not be pointed at another one. Relink now takes any design path
Insert Design takes (`is_design_path`: .sc, a legacy extension or .json); the
file is read by the same `design_bodies`, which already reads both. The Relink
Source file dialog opens on a filter that lists .json among the designs, too.
Assisted-by: LLM
* claim: #10258
* Sketch: construction lines with a length (#10258)
The horizontal, vertical, angle, parallel and perpendicular construction
line commands take an optional `length`: the line becomes a construction
segment from `at`, running towards `near`, held by a length dimension
that follows its expression. Without `length` the line stays infinite,
as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cf5e0e3c1 jyviko: Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
- In entry_row (crates/ui-egui/src/browser.rs), use live rather than cached for the property
- Ensures eye toggle dynamically fades or unfades rows for sketches and bodies without requiring a cache rebuild
- Add regression test in browser_card_tests
Fixes#9953
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7577e032f jyviko: Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 922ee28f3 jyviko: Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
- 19455396b jyviko: Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
- 4df3adc5a jyviko: Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
- 539d12648 jyviko: Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aa41c0b5d jyviko: Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
- 05f5e8601 jyviko: Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
- 9d4f78001 jyviko: SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Saving a design with its model cache asked, for every state, for each sheet-metal body it holds,
and built that sheet's JSON record each time only to find it written already. A design of 906
states with 300 sheets spent most of its save there. The sheet's text written straight from it
is the key now; its record is built only the first time. The records and the file are the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Find a saved model's sheets by their text, not a record built per state
Saving a design with its model cache asked, for every state, for each sheet-metal body it holds,
and built that sheet's JSON record each time only to find it written already. A design of 906
states with 300 sheets spent most of its save there. The sheet's text written straight from it
is the key now; its record is built only the first time. The records and the file are the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Write the model cache manifest without copying the model's records
The manifest was built as a JSON tree, which copied the whole model's records (13 to 33 MB of
records in large designs) before writing them, and a cache too big for the file wrote it again for
each try at fewer states. The manifest is now written from the records where they are, its fields
in the sorted order the tree wrote them, so the file is the same byte for byte.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10063
* docs: add a design approach and workflows chapter to the user guide (#10063)
Adds guide/design-approach.md after the window tour: the parametric idea, principles for designs that change well, the timeline and rollback marker, bodies vs components and occurrences, common workflows with links, a term map for users of other CAD software, and where to find help.
* docs: match the chapter to the app's labels and sketch colours (#10063)
Checked in the web app (0.29.0): the timeline strip is headed History, the toolbar shows New Sketch and Parameters for Create Sketch and Change Parameters, and fully constrained geometry turns white in the default dark theme rather than dark.
* docs: tighten the design approach chapter's wording (#10063)
The glossary covers most, not all, of the chapter's terms; Redo moves forward; the timeline is shown as the History strip; Report a bug drafts a report for the user to file and sends nothing itself.
A flat node's roundoff allowance took a hypot per control point. Twice
|x| + |y| bounds each hypot from above with room to spare for rounding,
and rounding keeps sums monotonic, so whenever the flatness test passes
with that larger allowance it passes with the exact one too. Only nodes
whose chord distance comes near the 0.5 px bound (or with a non-finite
term) now take the exact hypots, and they decide as before.
Same result for every node: the reference comparison test still matches
bit for bit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A caller that only needs the bodies' names (assembly occurrences included,
e.g. "Body2 (Part:2)") had to measure every body, or read document.inspect,
which lists definition bodies only. `inspect.measure {names_only: true}`
returns each world body's name and its definition's name, honouring the
`bodies` filter; an unknown name is refused before anything is measured.
The MCP `measure` tool passes it through, directly and as a batch step;
`summary` leaves such a list as it is, since there is nothing to narrow.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8876
* Add optional viewport-only Kawase blur and native UI composition
* Fix vendored panel hook imports and deprecated float constant import
* Drain texture updates in the full GPU blur fixture
* Hold the blur evidence fixture camera fixed across radii
* Address blur compositor lint checks
* Share animated Render preview background with blur source
* Use resolved Design background for blur source
* Exercise blur rendering independently of software adapter policy in CI
* Use stock egui hosts instead of vendoring the full crate
* Preserve feature-window open handling with stock egui hosts
* Target the native Window in close-handling regression fixture
Show F2 beside Rename on context menus where F2 already renames the
target (bodies, features and sketches, construction planes, components and
occurrences, browser groups, and canvases). Saved views and joints remain
without a shortcut label because F2 does not rename them without a menu.
When a context menu is open, pressing F2 routes through press_shortcut to
rename the menu's target (such as a clicked browser group or canvas) and
close the menu, rather than renaming the viewport selection.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Gemini 3.8 Flash <noreply@google.com>
Each node of the display curve sampler recomputed a control point's
seven clip distances for every clip plane it tested (up to 7 times for
the reject test, 3 more for the depth test, once more for the cut), and
projected each point to the screen twice. They are now worked out once
per node into arrays and read from there.
Most nodes are split rather than drawn. A node is flat only when every
control point lies within the pixel bound of its chord after adding a
roundoff allowance that is never negative, so a point already farther
than the bound decides "split" on its own; the allowance (four hypot
and divisions per point) is now left out for those nodes.
Same values in the same order: the reference comparison test from the
previous commit still matches bit for bit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The doc comment of the ground shadow had slid onto build_sketch_scene when
that function was added above ground_shadow. Give it back to ground_shadow
and describe what build_sketch_scene builds.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 75229f2b9 brett19: Offset tests: a sphere moved to its centre leaves nothing again (solidcore#2092 fixed by #2096)
- 6221b7f4b brett19: Rig: solidcore known-failing lists at pin de85a3e00
- b04e363e7 brett19: Rig: #316's renamed shell cases pass on solidcore, off its known-failing list
- c786db6bf brett19: A blend's pick measures close edges on their curves, not their polylines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch Coincident: a selected line midpoint is a point it takes (#10311)
A selected midpoint goes to the command as {midpoint: line}, as
Horizontal/Vertical's alignment takes it, but Coincident wanted a point
id and refused it with "b must be a point or curve". The command now
puts a point at the line's middle, tied there by a Midpoint constraint
(or uses the one already tied there), and makes that point coincident
or puts it on the other curve, in one undo step. The toolbar button and
the context menu send a selected midpoint that way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Coincident: test a line midpoint in the command, the toolbar and the context menu (#10311)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: open a design a feature at a time (#10198)
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: open a design a few features a frame, with progress and Cancel (#10198)
On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: design links and the files window open designs with progress and Cancel (#10198)
Design links (?open=URL, as embedded viewers use), the files window and
designs opened from the computer went through the one-shot open_path,
which froze the page on a large design. They now use the staged open; a
design link becomes an unsaved copy under the link's name once the open's
reply arrives (SolveApp::open_path_answered).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: open a design a feature at a time (#10198)
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: open a design a few features a frame, with progress and Cancel (#10198)
On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A sketch holding a text whose words come from a text parameter is left
unsolved after the words change and its links then move far, with the
warning "the sketch constraints conflict (k1, ..., k10)". The same two
changes the other way round solve.
Repro: a sketch with three projected points, a construction rectangle on
them and a centred text along its far side, the text's words given by a
text parameter. Change the parameter's words, then move the source
geometry about 280 mm. Without the word change it solves; with it, the
sketch warns of conflicting constraints.
Other words are other outlines: the text is built anew with new points
and curves. The solve that walks a sketch from its stored state to a far
link move (and the check for sides the jump turned over) refused the two
sketches as not the same entities, and the single jump left alone failed.
`Sketch::stored_with_rebuilt_texts` gives the stored sketch as this one
has its entities when they differ only by rebuilt texts: the texts'
entities as they are now, every other point, radius, arc turn and
constraint value as stored. `Document::solve_sketch` walks from that, so
the points pair up again. Sketches that differ in anything else are
refused as before.
Test: sketch_project::side_tests::a_label_follows_its_source_far_after_a_text_parameter_gave_it_other_words
(fails without the fix with the conflict warning above).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The pixel-bounded curve sampler that draws sketch curves and profile
outlines ran again on every camera move, and each subdivision step
allocated: every span's control points were a Vec, splitting one in
half built a Vec per de Casteljau level, each node's projection was
collected into a Vec, and every drawn part grew from two vertices.
The control points now live inline in a fixed array (`Hull`, at most a
degree-9 Bezier), the halves are worked out in place with the same
`mix` level by level, the projection goes into a reused array, and a
new part starts with room for eight vertices. The arithmetic and its
order are unchanged, so the points are the same bit for bit.
Tests: `samples_the_same_points_bit_for_bit_as_the_reference` keeps the
previous sampler as a reference and compares paths, quality and budget
use over every segment kind, slanted and far-off planes, orthographic
and perspective views from far out to far in, clipped and unclipped,
with ample and spent budgets. Ignored timings:
`sampler_cost_against_the_reference` (render) and
`sketch_scene_cost_while_the_camera_moves` (ui-egui).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The web build cannot start the open-meshing thread. Its fallback counted
every body done but listed none ready, so whatever the file load opened
on the web drew no bodies and kept "Loading parts n/n" up for good. The
fallback now lists every body ready and the viewport meshes as it draws,
as the fallback meant to. Found while opening a design through the file
load in the browser (#10198).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10218
* Assembly: move sketches to the part they're drawn on (#10218)
`component.move_sketches.to_parts` moves each given sketch, or every sketch in the design, whose
plane is an exactly attached face of a part's body into that part through
`component.move_sketches`, as one undo step. Sketches with no single part to go to stay where they
are, and the reply lists what moved and what stayed, with the reason. The Sketches folder's menu
offers it for the folder's sketches (or the selected ones), and a sketch's menu for that sketch or
the selected sketches; the status bar says how many moved and why the others stayed.
`component.move_sketches` now keeps a face-attached sketch where it is on its face: the sketch is
authored in the new component's placement (the face's own when the component owns the face), and
its picked point and repair plane are carried into it. Before, a face-attached sketch moved out of
the design was left without an author placement and failed to evaluate.
* Tests: the moved part is free to move; face anchor path
* Tests: move the to_parts test to the component command tests
* Shorter label: Move Sketches to Their Parts
* claim: #4581
* View angles card: per-axis zero buttons and locks (#4581)
The readout card under the orientation gizmo already showed and edited the
view's yaw, pitch and roll in degrees. Each axis row now also has a zero
button that turns that angle to 0 degrees at once, and a lock: a locked
angle stays put while orbiting, turning with the arrow keys or using a 3D
mouse, and its field and zero button go inert, so a symmetrical view can
hold its yaw and roll at 0 while only the pitch is adjusted.
* clippy: drop needless borrow in keep_locked call
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279)
The Ellipse tool showed no value boxes. After the centre it now shows
Major radius, after the end of the major axis Minor radius; a typed value
places the point at that size and becomes the ellipse's dimension, as for
a circle's Diameter. sketch.draw.dimensioned takes major_radius and
minor_radius for sketch.ellipse, so Dimension new shapes covers it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Ellipse: test the typed radii in the tool and in sketch.draw.dimensioned, and say so in the guide (#10279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Ellipse: rustfmt the new engine test (#10279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: faster highlight with many bodies selected
* Viewport: find selected bodies by name once per highlight build
With every body of a large assembly selected, each hover change built the
highlight again and looked every selected body up along the world's bodies
(`ModelState::body` scans them), which is quadratic: about 2.2 million name
comparisons on 2,116 bodies, some 3 ms of every hover change.
The selected bodies, faces and edges are now found in a map by name, made at
the first lookup. A name held by more than one body finds the first, as the
scan did, so the same bodies are lit in the same order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: measure hover changes with many bodies selected
An ignored scale test: every body of a design selected (a file named by
SOLIDCRAFT_SCALE_DESIGN, else a generated grid of 1,440 boxes), the pointer
moving from face to face, timing each hover change's highlight build headless
and as the app builds it on a GPU (bodies drawn from their plans, and from the
model scene's blocks). Run with `--ignored --nocapture`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fold the pending design format changes (align-axis-mask, equation-variable-unit, link-file-digests) into format 46.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 197cd4f43 brett19: Booleans: the copies no longer take an index
- 0f843c295 brett19: Pin solidcore at main de85a3e00 (#2080, #2081, #2086, #2095, #2096, #2097, #2102, #2103)
- 0b48548af brett19: Turn on solidcore's new fixes and take the rational-span flag off HELD_BACK
- d0c95f0dc brett19: Chamfer: second offsets through SetFilletParameters (solidcore#2095)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Keep full names in the tooltip only when the name cell clips them, and keep
the double-click rename hint without stacking a second popup. Cover short
and long names, favorites, and double-click input with a regression test.
Co-authored-by: Codex <noreply@openai.com>
* claim: #10254
* ViewCube: an option to invert the directional rotation arrows (#10254)
A new Navigation preference, "Invert the view cube rotation arrows"
(invert_navigator_arrows, off by default): with it on, an arrow around the
cube orbits the camera the way the arrow points, as in Fusion and Inventor,
instead of rotating the cube toward the side the arrow sits on. Left and
right, and up and down, trade places, and each tooltip names the action
actually performed. The curved roll arrows are not inverted: they name the
rotation they perform, not a direction.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: consolidate Gruvbox contrast variants
* Consolidate Gruvbox variants into light and dark contrast choices
* Check both original Gruvbox viewport gradient endpoints
* Reset Gruvbox scenario state before independent theme checks
* claim: #10215
* Sketch: an option to make the part active when sketching on its face (#10215)
Preferences › Sketch › "Sketching on a part's face makes that part active", off by default.
When it is on, a sketch started on a face of another component's body activates that component
at the picked placement first and is made there, as after an explicit activate. The part stays
active, so what is built from the sketch lands in the same part.
For scripts the same is `sketch.create` `activate_part: true`; the reply's `activated` names the
component and placement. On an error the active component goes back to what it was.
* Tests: a free part, no edge projection, the sketch on the face plane
* claim: #10151
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Sketch: clicking the running tool's button ends it, so clicks select again (#10151)
The lit ribbon button of the running sketch tool started the tool over
when clicked again, so it gave no way out: every click in the view kept
drawing or measuring, and Ctrl+click never reached selection. Esc and
right-click already end a tool, but the pressed button looks like the
natural switch.
A second click on the running tool's button (large ribbon buttons and
the constraint grid) now ends the tool. Persistent analysis toggles keep
their own on/off. The old behaviour stays behind the Sketch preference
"Clicking the running tool's button ends it" (ribbon_click_ends_tool).
Fixes#10151
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #10083
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* 3D mouse: turns a rolled or upside-down view the way the cap is pushed (#10083)
In the default upright (turntable) orbit the cap's Spin rolls the view,
but its Tilt and Turn went straight into yaw and pitch, which ignore the
roll. Rolled upside down, every push moved the model the opposite way on
screen; rolled on its side, tilt moved it sideways.
The device now takes Tilt and Turn back through the view's roll before
the orbit, for the cap and for a device app over the navigation bridge.
An unrolled view behaves exactly as before; Free orbit was already
view-relative and is unchanged.
Fixes#10083
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 1bf9c8665 brett19: HELD_BACK: geometric_g2_continuity is a fourfold slowdown on 2992, not a hang
- 126a281bb brett19: Pin solidcore at main c093bc5a3 (#2054, #2060, #2061, #2065, #2066, #2068, #2069, #2072, #2076)
- 5d59d42d8 brett19: Turn on gap_samples_non_bspline_v_stride, gap_array_append_updates_longest, imprint_skips_collapsed_definition
- 1c90e60aa brett19: Working copies by solidcore's brep_copy, not our own key domains (#2047 fixed by #2055)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #6606
* Sketch: held solves that cannot succeed give up sooner (#6606)
A status-only solve (the held solves of a drag) only asks whether it
succeeds. When LM sits in a least-squares valley of conflicting
constraints it crawled on to its 500-iteration limit, and a held solve
runs LM up to three times. Such a solve now leaves a component once the
iteration has stalled far from a solution: over the last 20 iterations
the sum of squared residuals fell by at most 1e-5 of itself while the
largest residual is still above 1e-4 mm.
Successful solves are unaffected: on about 62,000 LM runs that succeeded
(the sketch and engine tests and 120 generated sketch scripts with 2,900
drags) the slowest still fell by 1.4e-3 over any 20 iterations while
that far off. Solves with an analysis keep iterating (their report names
the violated constraints), and live frames are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- sketch.rectangle.center and two_point: a corner given with expressions is a fixed point that follows its parameters, as with sketch.line
- sketch.circle.center: a radius or diameter naming a parameter is a driving dimension; a string naming none is just the number; bare numbers read in the design unit
- A radius that is not a number is refused with its own message and no longer passed over for diameter
- sketch.circle.two_tangent: a string radius reads bare numbers in the design unit
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #10079
* Browser: a click just past a feature's name selects it instead of opening its sketch (#10079)
The Edit Profile Sketch button on a browser feature row began 2 points after
the name, so a click that landed just past the name, or a press on the name
that slipped a few points before its release, opened the profile sketch.
The button now starts 8 points after the name, wider than egui's 6-point
click slop; the gap selects the row like the name does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10138
* Follow the system language on a first start (#10138)
The language preference defaults to a new 'system' value: the OS locale
(sys-locale) is matched against the catalog list - exact tag, base
language, then English - and a System choice sits at the top of the
Preferences language list. A saved language still wins.
* Drop the explicit deref clippy flagged; regenerate THIRD-PARTY-LICENSES.txt for sys-locale
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
The three sketch chamfers take `points: [corners]` (a point reference or
{a, b} each), as sketch.fillet does: every corner is cut alike in one
edit, and a corner that can't be cut, or is named twice, refuses them all.
The Chamfer window sends every picked corner instead of refusing a second.
Claude-Session: https://claude.ai/code/session_01PVKpSVXR9iiwSM9B25kpvq
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 32b26888c brett19: Turn on offset_keep_cavity_regions and offset_four_face_vertex_split
- 38849d7b0 brett19: Hold geometric_g2_continuity: with the rational-span flag off, 2992 and 3368 don't end
- 5d7dca1a9 brett19: Offset tests: both kernels refuse a top moved -9; the sphere to its centre waits on solidcore
- da4db59a3 brett19: HELD_BACK: geometric_g2_continuity's reason is 2992 alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Navigation: an NX mouse mapping
NX's CAD1 scheme drags the middle button to rotate, middle + left to zoom and
middle + right to pan. The mouse mappings here hold one button at a time, so
the preset takes the middle drag with Shift (pan) and Ctrl (zoom) for those two
drags, leaves the right button to the context menu, and fits on a middle
double-click as NX does.
The help text says which NX drags the modifiers stand for.
* Navigation NX note: translations for the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation NX note: use the message id nav.nx.help in the pending file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: clarkliu <277482660@qq.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9570
* Cross-fade the viewport grid between levels while zooming (#9570)
grid_step switches the spacing in a step (1, 2, 5 times a power of ten), so
the whole grid swapped at once as the view zoomed through a switch and
popped over and over while scrolling. Near a switch the drawn grid now
draws the outgoing and incoming levels together, weighted by a smoothstep
over about 19% of zoom either side, each level's lines on their own places
on the plane so a fading level never shifts. A line both levels share is
drawn once; its colour and width blend between minor and major.
grid_step itself is unchanged, so sketch snapping, dash lengths and the
tools keep their spacing; the dominant drawn level is always grid_step's.
The viewport and the headless picture share grid_lines, so they still draw
the same grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fade out the fine grid before a non-nested coarser level appears (#9570)
The levels go 1, 2, 5 times a power of ten. From 1 to 2 and from 5 to 10
every coarser line is also a finer one, but 5 is not a multiple of 2, so
cross-fading the 2 and 5 levels drew lines at 0, 2, 4, 5, 6, 8, 10 mm at
once, which looked restless.
At that switch the finer level's own lines now fade out over the first
half of the cross-fade and the coarser level's own lines fade in over
the second, so the two are never drawn together. The lines both levels
share (every 10 mm, the finer level's major lines) stay at full strength
throughout, so the grid never goes blank. The cross-fade spans the same
zoom range as before, and the nested switches cross-fade as they did.
grid_levels keeps its shares (adding up to 1, grid_step's level the
stronger one); grid_lines draws a line only one level has as strongly
as that level's own lines. The headless and viewport tests now check
half strength at the nested 5 to 10 switch and no 2 or 5 mm line right
at the 2 to 5 switch; a new test zooms through 2 to 5 in four decades.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10091
* View cube and axis gizmo: a standard view centres and fits the model (#10091)
A new Navigation preference, "Fit the model after a navigator view change"
(`navigator_fit`, off by default): with it on, a face, corner or arrow of
the view cube and an axis tip of the gizmo look at the middle of the model
from the one distance that fits its bounding sphere, so Home, an opened
design and every view chosen on a navigator share one zoom and one centre
and only the direction changes. Off, both navigators turn in place as
before.
"Home and Fit size" (`home_fit_size`, 10–100 %, default 100 %) is how much
of the view between the panels and the controls the model fills when Home,
Fit, an opened design or a navigator view change frames it; 100 % is the
framing as before.
`view.navigate` takes an optional `fit: true` with a direction or a turn,
so programmatic callers get the same framing.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Assistant: the agent list and the boxes under the switcher keep the panel's margin (#10172)
The agent switcher above them sits in the panel's side margin, but what
the panel draws under it before a connection (the Agent row with Add
agent and Refresh, the agents found, what isn't installed, the New chat
confirmation and the sign-in box) started at the panel's very edge, and
Refresh was cut off at the right. They now keep the same side margin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: test that the agent list keeps the panel's side margin (#10172)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: the margin test passes the labels without a needless borrow (#10172)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4376
* Selection: a freehand lasso that takes what is wholly inside it (#4376)
The SELECT panel gets a Lasso checkbox (UiState::lasso_select, ui.set
lassoSelect). With it on, a primary drag from empty space draws a
freehand loop; the release selects through the same path as the window
box: items whose points are all inside the loop and no segment crosses
it, so a concave loop leaves out a curve that bulges out of it. Shift
and Ctrl add as with the box. ui.drag takes via waypoints (and scenario
drag steps take more than two points) so agents and tests can draw it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 19014f38a jyviko: Kernel rig: constant rounds of the exact classes, and a tee's round
- 73416a9bf jyviko: Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
- 60923d8cc jyviko: SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Arabic: isometric view wording in the Extrude view preference
* Arabic: equation curve range unit option and note read naturally
* Arabic: tanween spelling in the new bold-font and delete-first messages, menu and option names quoted in the graphics card note
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 2b1a63d3f brett19: Pin solidcore at main 2898e1197 (#2053)
- 9337aff4c brett19: Every solidcore fix on unless it appears broken (brett19's rule)
- 2cd566aae brett19: Hold bspline_trim_keeps_rational_end_spans: it fails 3078's check
- 9df34988c brett19: Pin solidcore at main bb6b65706 (#2049, #2051, #2055)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #5019
* sketch offset: chain lines whose corners are coincident, not only shared
Lines drawn one by one meet at their own points held by Coincident
constraints. The offset walked shared points only, so each such line was
offset on its own, to the left of the way it was drawn: a closed
rectangle came apart, both horizontals moving up. The same split shows
next to a fillet or chamfer, whose other corners stay Coincident pairs.
Chain ends held by a Coincident constraint as one joint, the way
Sketch::chain() and axis_implied already do, so a closed outline offsets
as one closed shape.
Fixes#5019.
* test(sketch): cover coincident offset loops after trim and blends
* refactor(sketch): share and cache coincident endpoint groups
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- eff6416d4 brett19: Pin solidcore at main f75e9d2e8 (#2023, #2024, #2034-#2040, #2043-#2045)
- 15e3a61da brett19: Pin 8: decide the new solidcore flags against the fork at 26cc451
- 6a0166853 brett19: A round mitred to one that overflows goes first with it (fork 9ba2b12); flags() and warnings
- d4eb66f25 brett19: Turn on offset_splits_corner_vertices (fork 2e1bb8c's behaviour)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #1936 (Fillet, Chamfer, Extrude, Shell and Draft edit dialogs)
* Fillet, Chamfer, Shell and Draft: a stored number edits with its unit (#1936)
Their edit dialogs showed a value stored as a bare number as it was, so a
fillet made with a radius of 2 opened as "2" and a chamfer angle of 30 as
"30", where the other dialogs, and since #2107 the Plastic ones, read
"2 mm" and "30 deg". The Fillet radius, the Chamfer distances and angle,
the Shell thickness and the Draft angle now go through shown_expr, as the
Plastic dialogs do.
Extrude is left as it is: its editor keeps an unchanged expression exactly
as stored (extrude_edit_tests), and writing the unit would change it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offset Face, Stock, Offset Plane, Plane at Angle, Pipe and Emboss too (#1936)
The rest of the dialog_descriptors! table's length and angle fields that
copied the stored text as it was now go through shown_expr as well: the
Offset Face distance, the Stock margin, the Offset Plane offset, the Plane
at Angle angle, the Pipe diameter and wall, and the Emboss depth. Scale's
factor has no unit and still shows as stored.
The test also edits an offset face, a stock and an offset plane.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Revolve, Thread, Rib and Web too (#1936)
The custom edit paths that copied a stored length or angle as it was now
go through shown_expr as well: the Revolve angle, the Thread length, and
the Rib and Web thickness and depth. The test also edits a revolve.
The Rectangular and Circular Patterns stay as they are, like Extrude:
their editors keep an unchanged definition exactly as stored
(preselect_tests::feature_mirror_and_patterns_reopen_as_feature_replays_even_for_body_creators).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9234
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Colour popover: step buttons, H/S/V fields and recent colours (#9234)
Every colour field of the app opens the same ui_kit popover. It gains:
- step buttons beside each number (R, G, B and the new H, S, V): a press
steps once, holding repeats, for live fine-tuning;
- H (degrees), S and V (percent) fields on the same gamma HSV as the square;
- a row of the last 12 colours picked in any colour field. A colour joins
when an edit is finished; fine-tuning in one opening replaces its entry.
The list is saved with the app's settings (`recent_colors`), hostile
saved entries dropped and the list capped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recent colours: keep the shared list outside ui_kit, crate-visible only (#9234)
The store and the per-frame sync with the saved settings move to
crate::recent_colors; the ui_kit colour popover only shows the list and
adds finished picks. No plain pub escape from the gallery's ui_kit rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch drag: a step that throws points far from the sketch counts as failed
A held step of a drag that moved a point more than 1000 times the sketch's
size plus the drag's way was taken as solved, so a drag could leave points
around 1.4e6 mm away while reporting it reached the cursor. Such a step now
fails like one the solver cannot solve, and the cursor correction refuses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch drag: a step that presses a line to no length counts as failed too
An end dragged past the point where its line would have to turn over (a
line held at its midpoint and by an angle, dragged past the midpoint; a
rectangle's corner dragged across the opposite side) pressed the line to no
length, where it has no direction left for its constraints. A step leaving a
line under 1/1000 of its length at the drag's start now fails like one that
throws points far away, so the drag stops just short of it (48 such drags in
4000 random sketches, none with this).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7854
* MCP batch: refuse a step with an unknown key (#7854)
A step's parameters under another key (`args`) were dropped and the
command ran without them. The batch is now refused before its first
step, naming the key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP batch: a step carrying `expect` is refused, saying it is the batch's argument
#9904 gave batch an `expect` argument and tested that a step carrying one runs with
nothing checked. That is the silent drop this branch refuses: the step is now refused
before it runs, and the error says `expect` belongs to the batch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Light a feature's faces after a later edit renamed them
Selecting a feature in the Browser or the timeline lights its geometry on the
model, by the face names the feature gave (`F<feature>:…`). A later edit that
moves or renames those faces (Offset Face, Replace Face, Delete Face) leaves
them named after whatever last touched them, so selecting the earlier feature
lit nothing.
When no face carries the feature's name, compare the model states either side
of it instead: a face whose name is new, or whose area, centroid or plane
moved, is a face the feature changed. Each is found on the body as it is now
by its name, or by a parallel plane and nearest centre, so a face a later
feature moved again is still lit.
The Browser row of the feature a picked face belongs to already lights; that
is unchanged (a body row lights too, as #3009 asks).
Test: a box raised twice with Offset Face; selecting the first raise lights
the face the second one renamed.
* Browser: light the feature of a picked face, not its whole body
Picking a face in the view lit the body's row as if the body were selected,
which in NX is not what a face pick shows: the Part Navigator marks the
feature the face belongs to. Faces, edges and vertices no longer light their
body row; the feature row of the picked face shows as selected instead
(`picked_feature`), while the session's selection stays the face or edge, so
Replace Face, sketches and the rest keep the pick they take.
The live face of the view still lights the face itself; the timeline already
marked the feature of a picked face and is unchanged.
Tests: the browser's 178 tests pass (selection arrays unchanged; only the
rows lit differ).
---------
Co-authored-by: clarkliu <277482660@qq.com>
The second fillet of a side whose radius is half its length needs all
that is left of the line, and was refused as too large. Such a fillet
now takes the whole line: the line goes, the arc ends where the line did
and is tangent to the curve that goes on from there. A 20 x 10 rectangle
filleted with r = 5 becomes a slot, a 10 x 10 square a circle. Several
corners in one call keep their arcs by id, as removing a line renumbers
the curves.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7507
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Fillet: a corner held by Coincident takes a fillet when a dimension measures to it (#7507)
Before rounding a corner whose two lines meet only through a
Coincident constraint, Fillet and Chamfer weld the two points into
one, but not when anything else referred to the second line's point,
such as a dimension measuring to the corner: the fillet was then
refused ("the lines must share a corner point"). The point is now
welded as well, and what referred to it refers to the corner, the
same place. A point that a constraint names together with the corner,
or a linked point, is still not welded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two selected lines that stop short of each other or cross were refused
with "the lines must share a corner point". Now each line's end on the
shorter side of their meeting point moves there first (extending a line
that stops short, cutting a line that runs past), and the corner is
rounded or cut as before. Parallel lines, ends held by other geometry
and lines whose length is held are refused and change nothing.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
An offset's ends follow its source curves on every solve, so a break's new
ends were pulled back: a broken offset arc came out in three pieces going
the long way round, and the solve moved curves the break never touched.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The offset sets an offset circle's radius from its source after the solve,
but the solve still counted that radius as a free unknown, so a
dimensioned circle and its offset reported 1 DOF instead of 0. Lines and
arcs were not affected: the offset already holds their end points. The
solve now holds an offset circle's radius too.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10057
* Pattern and Mirror dialogs: explain Object Type, and say why a sketch is not taken (#10057)
The Object Type row of the Rectangular, Circular and Path Pattern and Mirror
dialogs gets a tooltip saying what Bodies and Features are and that a sketch
is neither. A sketch clicked for their objects, in the view, the Browser or
the History, now shows a hint naming what to pick and what to do with a
sketch instead of being ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8706
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: measure faster, show progress, and stop when closed (#8706)
Properties on a large assembly measured every placed copy of every body
afresh (transform plus three fine tessellations each), so it took minutes.
#5203 (in #8103) already moved the measurement beside the window; this
builds on it.
- A rigid placement reuses the body's own cached measurement: volume, area
and counts unchanged, centre placed, box from the placed corners (quarter
turns) or from the body's shared mesh placed (other turns). Scaled or
mirrored placements are still measured as placed.
- Bodies are grouped by component once and the subtree traversal groups
occurrences by parent once (both were quadratic).
- The measurement beside the window is watched by a Progress: the card
says "Measuring... n of N bodies" with a bar, and closing it (or
switching designs) cancels the worker at its next body instead of
leaving it running.
- component.properties and occurrence.properties are answered on a copy for
control-channel requests too, as inspect.measure is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: count the measuring work instead of timing it in the reuse test (#8706)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A switch between design tabs cancels the open dialog and tool of the design
left and shows MODEL. With the new Interface preference "Keep dialogs and
tools open when switching designs" (keep_work_on_tab_switch, off by default)
each tab keeps its dialog (with its picks and values), its editing state, its
tool and its toolbar tab, and has them back when it is shown again. A feature
still computing after OK is cancelled as before. A feature edit's saved source
revision follows the view refresh of the switch, so its Cancel still restores
the history.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9743
* Update Links: linked designs that changed while the tab was away come back as one undo step (#9743)
Coming back to an assembly's tab read each changed link in an Update Links
run of its own, so each became its own undo step: one Undo took back one
component and left another copy of the same part at the new version.
component.update_links now takes `components`, a list, and goes on past a
design it cannot read: that link keeps its bodies, is named in `failed` and
gets a warning. The tab return sends one request with every changed link,
records as read only the ones that were, and says on the status line which
one could not be read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 8ad306e69 brett19: boolean2d through boolean_2d, typed edge-vanishes, typed put-back refusal
- b6285e525 brett19: Overflowing rounds go first again (solidcore#1980)
- 2647b12e5 brett19: Hold back fillet_refuse_crossing_rails: not in the fork
- 0b627d637 brett19: Restore all_solid's loop: an unused index slipped in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Delete: the delete runs with what its check computed ahead (#9917)
With the history rolled back, a delete builds the history after the
marker to see what it breaks, once in the check that runs off the window
thread (Session::ahead) and once more in the delete itself, on the window
thread. The check's results were lost on the way: the dry run's scratch
session and the whole-history copy dropped what the model keeps, and the
check's kept results never reached the delete. The scratch and the copy
now keep what their model keeps, and the delete (at once or after the
confirmation) runs with the check's kept results, so it finds the
history there instead of building it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: test that a confirmed delete runs with what its check kept (#9917)
With the history rolled back, deleting a side of the plate's outline is
checked off the window thread and confirmed first; the confirmation
carries the check's kept results, and the delete adds nothing to them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10050
* Hide the origin point behind bodies like the axes and planes
The origin point is a flat dot painted after the 3D scene, so it always sat
over bodies while the axes and planes respect the through-bodies rule
(#2697, #2618). Ask the meshes the same question the depth test asks the
axes: is a nearer kept face in front of the origin along the view ray.
Fixes#10050
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a3165f62d jyviko: Rig: fillet corners graded curvature-continuous, the default to be
- be0b1b39b jyviko: Rig: the test-peg's front chamfer builds
- 6cd4003ad jyviko: Rig: the curvature-continuous corner cases pick the curvature fillet
- 4401ffb1f jyviko: Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch: a centre rectangle's centre lines up with the axes when dragged (#10086)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a centre rectangle's centre lines up with the axes when dragged (#10086)
A centre rectangle's centre is held at the middle of a construction
diagonal (Midpoint), on none of its curves. Dragged by the centre, the
rectangle's own lines stayed snap targets and held the centre at their
middle, so it never lined up with the origin; dragged as a whole, the
centre wasn't a moving point, so only the corners lined up.
drag_snap::moving_points now takes all dragged entities at once and
treats a point held at a line's middle as going where the line's ends
go: it moves with a line whose two ends move, and when it is dragged
its line and the shape round it are no targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10066
* Keep one dialog field active at a time (#10066)
Pick fields drew their accent ring from the dialog's active-input index
while text editors drew theirs from egui keyboard focus, so a Circular
Pattern dialog could show Axis and Quantity active together. A pick
field now drops its ring while a text editor holds the keyboard, and
clicking a pick field (or its clear button) takes the keyboard back.
Selection routing (d.active) is unchanged.
* Format editor_has_focus onto one line
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Navigation: wheel and trackpad gestures go on under a value box (#10061)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation: wheel and trackpad gestures go on under a value box (#10061)
Any area above the model took navigation's wheel input, so a two-finger
pan, orbit or zoom stopped as the pointer crossed a floating value box
(Extrude's distance), and none could start over one. Model-anchored
canvas areas (Surface::Canvas: value boxes, a dimension's editor,
readouts) scroll nothing: navigation's wheel, trackpad pan and orbit and
pinch now go on under them. Their clicks stay theirs, and with value
stepping on the wheel stays with the value under the pointer.
Container::area records the canvas areas it builds; navigation asks
whether the top layer under the pointer is one (container::is_canvas).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 83487c4d9 brett19: Pin solidcore at main 9f2c980b3 (#2004, #2005, #2006, #2008)
- aca0b57ee brett19: Turn on plane_recognition_origin_after_axes
- 5c0279153 brett19: Pin solidcore at main c369f8801 (#1977, #1996, #2000, #2016, #2017, #2018, #2027 and more)
- 14b1d1956 brett19: Pin 7: decide the new solidcore flags against the fork
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Rename Body: a pasted placement's body renames by the name the browser shows (#10017)
The browser lists the bodies of a component's second placement by their
placed names (`KB (K:2)`) and the context menu's Rename sends that name,
but body.rename looked it up only among the model's own bodies and
refused it ("no body"). It now takes a placed copy's name as the body it
shows, as appearance.assign does (#9740): the body is renamed in its
component, so every placement shows the new name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename Body: test renaming a pasted placement's body by its placed name (#10017)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename Body: the test also hides the copy first and undoes the rename (#10017)
A copy hidden by its placed name stays hidden under its new name, and
one undo brings both names back (checks from the review on #10026).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9079
* Modify ▸ Delete with nothing selected asks for a pick instead of a parameter error (#9079)
Starting `timeline.delete` from the ribbon, the command palette or the
control channel ran it with no parameters, so the notice showed the
engine's check ("`features` must list features, or `groups` timeline
folders"). It now deletes what is selected, as the Delete key does, and
with nothing selected shows a hint saying what to pick, changing nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10005
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* F2 renames a group clicked in the Browser (#10005)
A group has no selection of its own: clicking its Browser row only
records it as the picked folder, which V uses. F2's rename_selection
looked only at the selection, picked components and canvases, so on a
group it did nothing, or renamed a body that was still selected.
F2 now takes a clicked group row first, as V does, and opens the same
Rename box as the group's context-menu Rename, which commits through
browser.rename_group. This works for groups inside components as well.
Fixes#10005
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #7974
* Viewport: dark parts keep their shape: linear-light shading and a sky fill (#7974)
Preferences > Graphics "Keep the shape of dark parts" (off by default)
shades the viewport in linear light: the key light and eye fill over a
sky fill that grows as a face turns up, plus the 4% of that sky every
dielectric reflects (a little more toward grazing), encoded to sRGB
once. Near-black faces keep a gradient; light and mid-grey faces stay
within a few levels of the sRGB shading. The world's up direction and
the switch ride in a new `sky` vec4 at the end of the viewport uniform,
and the frame key, so turning it on redraws. Off, the shader takes the
old path unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: a shortcut recorded from a search result takes the key (#10043)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: a shortcut recorded from a search result takes the key (#10043)
A Preferences search lists matching shortcuts with their key buttons,
but a recording started there only counted while the Shortcuts page
itself was open, and the page skipped its recorder during a search: the
key went into the search box and ran its command behind Preferences.
keymap::capturing now counts a recording while a search shows, and the
recorder runs for it; clicking back into the search field stops the
recording, so the search keeps its own typing. The recording's message,
a taken key's Use anyway / Cancel choice and the next-step hint show
above the search's shortcut matches too (outcome, shared with the page).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* fix(ui): disable bold in Edit Text when font has no bold face (#9940)
- Check whether font has bold face via font_data_styled() before enabling bold toggle
- Automatically uncheck bold and disable bold button with explanatory tooltip for built-in font
- Prevent sending bold: true in sketch.edit_text when font lacks bold face
- Add unit regression test in sketch_text::tests
Fixes#9940
* style: format choice.rs in ui_kit
* i18n: move sketch_text.no_bold to pending locale catalog with complete translations
* test(sketch_text): assert disabled bold on built-in font without error (#9940)
* claim: #9970
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Agent chat: no error when an agent does not serve session/set_model (#9970)
An ACP agent can list models in the unstable `models` field of its
session/new reply without serving `session/set_model`; it answers
JSON-RPC -32601 and the Assistant showed that as an error each time the
model was switched. Agents that offer the model as a configuration option
already go through session/set_config_option. A -32601 reply to
session/set_model is now logged at debug level instead of shown; every
other error still shows.
Fixes#9970
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Delete: the check in a rolled-back history builds the history once when nothing breaks (#9917)
With the history rolled back, the check before a delete (which features
the delete would break) built the whole history twice, before and after
the change, with the marker removed. On a large design each build ran
every boolean after the marker: deleting twelve splines took half a
minute on the window thread. Only a feature that fails after the change
can be newly broken, so the history after it is built first, and when
nothing fails there the history before it isn't built at all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: test that the check in a rolled-back history still reports what breaks (#9917)
Deleting a hole in the plate changes the plate and every cut after the
marker and breaks none of them: the check reports nothing. Deleting a
side of the outline breaks the plate, and the check still says so, with
a cache too small to keep a state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8341
Co-authored-by: Cursor <cursoragent@cursor.com>
* Graphics: keep a preferred card when surface marks it incompatible (#8341)
Prefer the saved adapter by exact then case-insensitive name, including when only listed as surface-incompatible, and explain in Preferences when another card is still in use.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Format and clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(engine,ui): allow restricting point-to-point align to chosen axes (#9946)
* style: apply cargo fmt across crates
* fix(clippy): use filter then map instead of bool::then in filter_map
* claim: History: build the row plan once per revision and draw only the visible rows
* History: build the row plan once per change and draw only the rows in view
The vertical History worked out its rows from the design on every frame: for each row it
searched every folder's last feature (cubic in features and folders), cloned every name, and
looked up each row's result, sketch and selection by a linear search. It also drew and
hit-tested every row, including the ones scrolled out of view.
- The row plan (features, folders' depth, extent, header places, contents and joints, the rows
with listed sketches, which sketches have patterns) is built once per design change, keyed
by session, revision, marker, counts and the "Sketches: under their feature" choice, and kept
in the egui context; the visible order is kept beside it until a folder or fold opens.
- A feature row outside the scroll area's clip takes its place and publishes its handles, but
is not drawn or made interactive; one being found, dragged or focused, or under an open
menu, is drawn as before.
- Selection and results are collected once per frame; folder rows read their contents from
the plan.
- The horizontal strip collects the picked features (selection and dialog items) once per
frame and writes a chip's tooltip only while it shows.
Tests compare the plan with the per-frame searches it replaced on tangled folders in every
fold state, the kept plan with a fresh one after each kind of change, and the History drawn
with every row against the culled one (same places, same text in view, fewer rows drawn).
An ignored test times the panel on a large design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop a needless borrow
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8749
Co-authored-by: Cursor <cursoragent@cursor.com>
* Recover egui chrome after a long pause between frames.
Sleep/wake can leave the window black while the GPU device stays up: re-upload
the font atlas, clear cached icon textures, and repaint when the frame clock
jumps so the ribbon and panels are not stuck blank (#8749).
Co-authored-by: Cursor <cursoragent@cursor.com>
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)
A dimension placed while a constraint fixed what it measures goes in
driven, and stayed driven once that constraint was deleted: a
double-click only said it has no value to edit. The double-click now
tries making it driving on a scratch copy; when nothing else fixes it,
the value box opens at the measured value, and Enter makes it driving
(sketch.toggle_driven) at the typed value (parameters.change) in one
undo step. A refused value goes back to a checkpoint, so it stays
driven. While something still fixes it, it stays read-only as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9945
* Sketch: Project gives its new curves the selected line type (#9945)
The sketch palette gives the drawing line type (construction, centerline, infinite) to the
curves a SKETCH › CREATE command reports under `curves`. Project reports what it made per link,
`links[].curves`, so its curves were never found and stayed normal lines whatever the palette
said. `apply_mode` now also reads the links' curves, so a projected line becomes construction,
centerline or infinite and a projected circle construction, in the projection's own undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9489
* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)
With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the cursor label names the command in words (#9489)
The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Show/Hide put every sketch it showed in `shown_sketches`, the list of
finished sketches kept shown although a feature uses them. Hiding and
showing a sketch nothing used yet put it on that list, so once an
Extrude used it, it stayed shown instead of hiding itself as a sketch
never hidden does. Show now marks only a sketch a feature already uses;
one nothing uses is shown anyway and leaves the list alone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: view corner Cancel cancels an unfinished tool first (#6709)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* View corner Cancel: cancel an unfinished tool before the sketch (#6709)
With OK and Cancel in the view's corner on, the cross took the whole sketch
even with a line half drawn. It now takes the steps one Esc takes first (a
drag, Select Other, the tool's points, then the tool) and cancels the sketch
only when nothing is unfinished. Esc and the cross share cancel_unfinished.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9333
* Equation curves: the variable can carry its range's unit (#9333)
A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Engine: lower the per-command cost of evaluating large designs
* Engine: lower the per-command cost of evaluating large designs
- The fingerprint texts of features are kept in one store shared by every
worker, not per worker: a command evaluated ahead runs on a new worker each
time, where the per-worker store was always empty and every feature was
written out again. Same texts, same hashes.
- Pinning body names after a command keeps, per feature, the names of the
bodies it made with the state they were read from, so it no longer searches
every result's bodies (features x bodies per command), and finds results by
their index before searching.
- Pinning fingerprints the timeline again only from the first renamed feature
(or a pattern or mirror of features replaying one) when the model proves its
fingerprints are the design's; the fingerprints are those of the full pass.
- The evaluation cache's byte count looks bodies and sketches up instead of
searching them per body (bodies squared per feature). Same counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9176
* Preferences: turn the view to isometric when Extrude opens, and back afterwards (#9176)
Two new preferences on the Design page, next to "Extrude to a picked target", both off by
default:
- `extrude_view_isometric`: each time Extrude opens, the view turns to the isometric view, so
the depth can be seen right after a sketch seen face-on.
- `extrude_view_return` (only with the first): when Extrude closes, by OK, Cancel or Esc, the
view goes back to where it was before it turned, keeping the projection as the end of a sketch
does (#7038). The check is per frame, so every way the dialog closes is covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- ec3a21778 Brett Lawson: smlib: a blend on solidcore has a history, as on the C++ kernel
- 03470c3df brett19: Pin solidcore at main 9dde25e97 (#1988, #1997, #1985, #1940, #1974, #1975, #1976)
- f01b87757 brett19: Audit the held flags against the fork's source; tabbed plate and mitred rounds parity
- 9b73dfe74 brett19: Offsets go through solidcore's simple calls; ignored tests cite solidcore issues
Co-authored-by: Brett Lawson <brett@Ubuntu-resolute-latest-amd64-base.zst>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* MCP: batch and execute take expect {volume, bodies, bbox} and flag a mismatch (refs #3380)
An optional `expect` argument on the `batch` and `execute` tools: the volume
(with a relative `tol`, default 0.002), body count and bounding box (0.05 mm)
the agent computed before building. Once the call has gone through the server
measures the design as the `measure` tool does and the reply gains
`expectation: {ok, measured, expected, mismatch}`. A mismatch flags the tool
result `isError` with the mismatch text first; the design is kept as built.
A malformed `expect` is refused before anything runs. Without `expect`
nothing changes, and a batch step carrying one is a step with a stray key.
In 29 logged agent sessions every agent computed these numbers beforehand
and then spent a `measure` call plus a comparison by hand after every stage;
one missed a 0.25 mm skin until it compared. Volume and body count are
kernel-independent checks.
Refs #3380
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP expect: filter then map for the bbox coordinates that are off (clippy)
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: expect's coordinate text helper no longer shares a name with the JSON reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* claim: Save: hard-link the backup copy and check for unsaved changes once per revision
* Save: keep the backup as a hard link and check for unsaved changes once per revision
The backup of a save is the old file under a second name (a hard link renamed over the
old .bak) instead of a copy written out again; where links are refused (FAT, shares,
cloud folders) or the old file cannot be flushed, it is copied as before. Every point a
save can stop at leaves the design file whole and the backup the version before it.
Session::is_dirty compared the whole document with the saved one each time it was asked,
which the window does every frame for every tab. The answer is kept per revision and pair
of documents; the cache holds both, so neither can change in place while it stands, and
doc_mut lets it go first so edits stay in place.
On the rover in two unsaved tabs an idle frame takes 15.0 ms instead of 19.3 ms; a save
with its backup of the 11.8 MB file writes in 9.6 ms instead of 18.9 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the system note reaches agents beyond the Claude adapter
The note only went out as `_meta.systemPrompt.append`, an extension of the
Claude adapter, so Codex and Antigravity never saw it. It now also goes in
the standard ACP `systemPrompt` field for agents that offer it, and in
`_meta.antigravity.systemPrompt.append` for Antigravity.
Fixes#9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- 247 help texts (help.*) and 95 UI messages: theme options, viewport status, quick measure, personal sheet-metal rules, analysis details, sketch report
- Terms aligned with fr.json; no-break space before : ; ? ! as in the catalog
- Pending file, folded on main after merge
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #9919
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: with every body hidden, a new extrude stays New Body instead of turning to Cut (#9919)
Smart Extrude passed the shown bodies as `participants` to keep hidden
ones out (#6901), but with none shown that list was empty, and the
engine reads an empty list as the whole scope: a profile on a hidden
body chose Cut, which has no shown body to change, so nothing was
previewed and OK did nothing. With no body shown it now chooses New
Body.
The operation it latches for a side is also decided again when a body
is shown or hidden while the window is open, as a new start already
does (#467): showing the body an extrude goes into turns it to Cut,
hiding it again back to New Body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9916
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: the window can be dragged by its title (#9916)
The window was pinned at the top middle of the screen (ui_kit::Window
anchor), over the model, in a sketch or not. It now starts there and can
be moved (`placed`), as the file-load card can.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
The `initialize` instructions were one paragraph of command shapes. Replace
them with version-neutral guidance: read `skill_reference solidcraft-modeling`
first, plan the numbers, build in a few `batch` calls, the primitive routes
and the fillet-shell-inside-holes order, what follows a parameter, `measure`
after each stage with a coalesced parameter check, and `timeline.edit` /
`parameters.change` / `edit.checkpoint` to fix instead of rebuilding. The
Assistant's system note gets the same pointer; docs/mcp.md says so.
`instructions_name_only_real_tools` now checks the command ids as well as the
tools, and `instructions_recipe_builds_a_parametric_shelled_box` builds a part
the way the instructions describe and checks its volume, axes and parameters.
Refs #3380
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: measure summary and body_topology faces: cylinders for small verification replies (refs #3380)
`measure {"summary": true}` replies one short object per body (name,
volume_mm3, bbox, faces, closed) with body_count and total.volume_mm3,
as a tool and as a batch step. `body_topology {"faces": "cylinders"}`
replies only the cylindrical faces, the kernel's split halves merged
by radius and axis line into {radius, origin, axis, extent, names},
and no edges. Both defaults are unchanged. The merge uses only what
model.faces and model.edges already reply.
Measured on a 13-feature enclosure, body_topology is 74 KB and measure
1.1 KB per body; agents filter them with scripts, and seven of 29
benchmark runs asked for exactly a cylinders-only listing.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: keep body_topology's cylinder merge next to check_parameters' without a name clash
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* Claim part of #9738
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: default names skip names in use (part of #9738)
Contact sets, motion studies and exploded views were named by how many
there were, and a component's placements by how many it had, so after a
delete the next default name repeated one still in use, and commands
given that name acted on the first. They now take the first number no
item has, as joints' and the app's dialogs' default names already do; a
placement keeps the next number when it is free.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9858
* 3-Point Circle keeps snapped clicks as coincident constraints (#9858)
The tool sent only the three clicked positions, so a click snapped to a
point or curve left no constraint and the circle was free once drawn.
Each click now goes as its snap, as the 3-Point Arc's do, and the engine
adds a PointOnCurve for each referenced point, as the centre circle's
through click does (#3099).
* Fix#9858 test: assert the clicked midpoint point, not the line end
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A new tool that checkpoints the design, sets every value in one
parameters.change, reports measure, errors and cylinder axes, and
restores the checkpoint, so the loop set_parameter / measure /
body_topology / set back costs one call and one rebuild.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Claim #9739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: one changed while the assembly was closed is read when it opens (#9739)
A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: read what changed last when a design opens in place of the blank one (#9739)
A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Adds the last 79 German translations for messages that exist in en.json
but are missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the agent chat tool summaries,
the history, sending to a slicer, Perforate, the window system and the
web app.
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the Render studio (lighting,
environment, sun, depth of field), bounded volume and interior scattering,
saved shots, the timeline messages, thread direction and the agent chat
and endpoint settings.
* claim: #9860
Co-Authored-By: Claude <noreply@anthropic.com>
* Sketch panel follows Dialog buttons at top (#9860)
The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.
Changes a default: no
Co-Authored-By: Claude <noreply@anthropic.com>
* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9742
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* joint.drive: a suppressed joint stores nothing; the reply says what was asked and why a value differs (#9742)
Driving a suppressed joint answered moved: false with "H is suppressed"
but wrote the values into the joint, with an undo step, so the part
jumped when the joint was unsuppressed. A suppressed joint outside any
motion link now stores nothing.
The reply gains `requested` (the values asked for, before limits and
links) and `held`: each driven value that ended up elsewhere, with why
(a motion link sets it, as a screw's travel follows its turn; a limit;
contact; a closed loop). A drive that moves nothing gives the first held
value's why as `reason`, so driving a screw's distance alone no longer
answers moved: false without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9735
* Sketch: conflict messages name real constraints, not the refused one's id or a false 'fully constrained' (#9735)
* fmt + clippy: contains over iter().any (#9735)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Add German translations, batch 7 (#7237)
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the parameter list setting and
the Render panel pages: GPU material overrides, nested dielectrics, saved
optics, output size, physical background, presentation filters, preview,
quality budget, regrade and the result area.
* German batch 7: render.result_sequence follows the catalog's Checkpoint term
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 88e00486b jyviko: STEP import: a face bounded by a slit alone is the whole of its closed surface
- 3c16884f7 jyviko: Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57edcf61a jyviko: Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
- a250062c2 jyviko: Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
- b0d1ba345 jyviko: Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
- 77f127c61 jyviko: STEP import: a face bounded by seams alone runs its loop the other way, never turns over
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 889a2f866 jyviko: Kernel rig: the cut mirrored loft graded on the box its sections pin
- 37a4c5647 jyviko: Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
- 6c2a2f395 jyviko: Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
- cd56cd3ad jyviko: Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6847c97c jyviko: Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
- bfdb79418 jyviko: Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
- 130f2adaf jyviko: Kernel rig: the two G0 window patches graded on the box the part they close keeps
- 8e0f6403c jyviko: Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49c7b982e jyviko: Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
- 0bcc24ccd jyviko: Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
- 27b7e202a jyviko: Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
- 9b4162a33 jyviko: Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f2aba03f8 jyviko: Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
- 764719c53 jyviko: Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
- 4b512f69e jyviko: Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
- 63dd6ae6f jyviko: Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a53f1640e jyviko: Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
- be8e728cd jyviko: Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
- edb558bd1 jyviko: Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
- fd9d159f4 jyviko: Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c740e4de1 jyviko: Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
- ba75de350 jyviko: Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
- bdb321cdb jyviko: Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
- 1893a5016 jyviko: Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d54d3195f jyviko: Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
- c0c961326 jyviko: Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
- d77aac416 jyviko: Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
- e30459e52 jyviko: Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7fdbd5ab6 jyviko: Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
- 18c8add3f jyviko: Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
- 5fb3cfa8a jyviko: Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
- 34e404d38 jyviko: Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3c8c36ec jyviko: Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
- 9aa2651b1 jyviko: Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
- 391fc51b4 jyviko: Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
- 166d574cc jyviko: Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e348ae2a jyviko: Tests: rustfmt the board fixture example and the coplanar asserts
- 033d1a122 jyviko: Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
- 780a0652d jyviko: Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43551498d jyviko: STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
- 6704d3094 jyviko: Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
- 94acc0c43 jyviko: Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
- 88c7cb6a8 jyviko: Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f81c4b157 jyviko: Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
- 9c0d6bd1f jyviko: Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
- 648413556 jyviko: Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
- 35805f899 jyviko: Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 16bef1097 jyviko: Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
- 699ddb6b3 jyviko: SMLib history test: every operand's order is the identity on its record's faces and edges
- ec421252d jyviko: Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
- f87f22874 jyviko: Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94e67d4ca jyviko: Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
- 4c7d4f5c0 jyviko: Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
- 0d94d5f77 jyviko: Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
- c44cbe9ac jyviko: Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d7bbf09e0 jyviko: Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
- 0e51ffbff jyviko: Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
- e03c72a3e jyviko: Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
- 321e56724 jyviko: Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fe9df533 jyviko: Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
- 8ec40d25e jyviko: Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
- 697ea2ca8 jyviko: Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
- e60cde8dc jyviko: Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 25692b119 jyviko: Kernel rig: the ring cut frame and the up-down join shell
- 18f08bf83 jyviko: Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
- 78b765e83 jyviko: Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
- f7d4e5344 jyviko: SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 469a3b2f9 jyviko: Naming: a blend's seams split its edge's name at the | between its two faces
- 1d818a2d1 jyviko: Fillet rig: five refused blends build, off the known-failing list
- 8550ac7e4 jyviko: Kernel rig: the trough and the pocket whose floors fall to a drain build
- 5f826a1a6 jyviko: Kernel rig: the plate with a hole through its arc side shells open at its far end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b16e8a542 jyviko: Sketch: a control spline can carry its own knots and weights
- e6abea809 jyviko: Sketch projection: a free-form edge comes in as the one exact spline it is
- f61f25c7f jyviko: Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
- 09bc14dbd jyviko: Naming: test that a round of a round's end has no seam with that round's faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9740
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Body names: inspect.interference refuses an unknown body; appearance reads take a placed copy's name (#9740)
inspect.interference dropped a name that is no body, so a misspelled or
wrongly cased name left that body unchecked and two overlapping cubes
answered count 0. It now refuses the name, as inspect.clearance does,
naming the closest body when one is near enough to be a typo or another
case (cmd::no_body, on the existing edit_distance).
appearance.chain, appearance.list and appearance.replace's scope take a
placed copy's name (KB (K:2)) and a placement's (K:2) for the body and
component they show, as appearance.assign already does, through two
Session helpers: own_body_name (on body_frames) and component_or_placement,
which appearance.assign now uses too. A name that is neither is still
refused. select.set already refuses an unknown body on main (#9737).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).
With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
* claim: #9715
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715)
assembly.mass_properties (and Session::mass_properties) gives, for every
occurrence and every rigidly-joined group, mass (kg), centre of mass (mm) and
the inertia tensor about it in world and frame axes (kg mm2), the input
the multibody dynamics work needs. Bodies are measured as Properties
measures them (kernel volume and centre, mesh gyration), once per body,
then moved by each placement and combined by the parallel-axis theorem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9619
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: edit an added AI agent (#9619)
Agents you added in Preferences > AI get an Edit button between Test and
Remove. It reopens the Add agent dialog filled with the agent's name and
command, or its protocol, preset, endpoint, model and request timeout, and
Save changes the entry in place: same id, permission override and
always-allowed tools. The stored key is never read back into the dialog;
an empty key field keeps it (still only sent to HTTPS or this computer),
a new key replaces it. The control channel gets `edit_dialog`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.
Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9258
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: paste sketch geometry copied in another design (#9258)
Sketch geometry copied or cut in a sketch (sketch.copy / sketch.cut) now pastes into a sketch of another open design with Ctrl+V or the context menu, at the cursor or at the copied coordinates, with the constraints and dimensions among it. A dimension whose expression names the copied design's parameters keeps its value, in its unit; a text keeps its numbers. SketchClip::for_another_design prepares the clipboard; the app keeps the last sketch copy beside the cross-design body/component copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9293
* Assistant: a sign-in confirmed in one tab holds in every tab (#9293)
The latest sign-in evidence per agent is window state: keep it across
tab switches, new tabs and replaced designs instead of resetting it with
the tab's conversation, so a new tab no longer marks the agent as signed
out when discovery's login probe is older than the chat's proof.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9060
* Ribbon tooltips: help for the Sketch tools (#9060)
84 sketch commands get the two-sentence help under their tooltip, in
English, German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and
leave the backlog: every Create tool (lines, rectangles, circles, arcs,
slots, polygons, splines, conic, ellipse, text, points, the 3D sketch
tools, Project, Intersect and the other reference tools), every Modify
tool (Trim, Extend, Break, Offset, Fillet, the chamfers, Move, Scale,
Transform, Blend Curve), the patterns and Mirror, every constraint,
AutoConstrain, Sketch Dimension, Create/Edit/Finish/Cancel Sketch and
copy, cut and paste. The help tests use inspect.zebra as the
undocumented example, since sketch.trim has help now.
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dd8867414 jyviko: kernel: Extend grows a surface of several faces face by face
- 48a757827 jyviko: kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
- 3421a8ef0 jyviko: Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
- 20d5d8b13 jyviko: kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.
edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The browser asks about every joint of the design on every frame, and
the answer walked the list of hidden joints: a nested STEP assembly
hides thousands of them, so a frame cost grew with the size of the
design.
Session keeps the hidden joints and folders as sets and answers from
them. The sets are built when the view changes and kept until it
changes again: the revision says the design changed, and the lists
say the view changed under it (the view is replaced outside the
engine too, without a revision of its own).
The behaviour is unchanged: the hidden joint stays hidden, the shown
one stays shown, and undo and redo keep the hiding right.
* claim: #9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: say why a drawing has nothing to import, and read UTF-16 files (#9641)
An SVG with nothing SolidCraft draws (only an embedded picture, shapes
pulled from another file with <use>, or not an SVG at all) was refused with
"invalid parameters for sketch.insert_svg: the drawing has no geometry
SolidCraft reads". It now names the file and says why, pointing pictures at
Insert Canvas and Canvas to Sketch. SVG files with a byte-order mark or in
UTF-16 now read, and a gzip-compressed (.svgz) file is refused clearly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: decode UTF-16 with as_chunks (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9041
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: start the GPU path tracer setup only when the GPU image method is chosen (#9041)
Entering the Render workspace started the GPU path tracer setup even with
the default Raster image method. The setup compiles the path shader, which
some Vulkan drivers (Mesa RADV/ANV, NVIDIA) take gigabytes over: the memory
climb reported while orbiting in Render. The setup now starts only while
Render is open with the GPU path method.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9730
* Preferences: unapplied changes no longer reach the settings file while the dialog is open (#9730)
* Preferences: hold unapplied changes out of the settings file while the dialog is open
While prefs_window.snapshot is set, SolveApp::prefs() writes the snapshot's
values - the ones Cancel restores - so the periodic autosave, quit, window
close, web save and control channel can no longer persist a change that was
never applied. Apply re-baselines the snapshot; settings the dialog cannot
change keep saving live. Adds regression tests and updates the tests that
pinned the old behavior.
Fixes#9730
* prefs: bind the snapshot's shadow outside json! so the ui-containers guard reads it
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9686
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: joint.edit takes the two sides
joint.edit accepts a and b in the form joint.create takes them (read by the same origin_param), so a joint can move its attachment without being deleted. A side left out keeps its place. The two sides must stay on different occurrences, checked as joint.create does. Limits, values, expressions and the name are kept; a relation's values start again where its parts are.
joint.edit gets an input contract and reply type (schema/joints.rs), and leaves schema/unconverted.txt.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint shows both sides and picks them again
The Edit Joint dialog now shows the two sides in the same selection inputs as Joint, each pre-filled with the face or edge of its own component under the origin. OK sends joint.edit a or b only for a side picked again, so an untouched side keeps its origin exactly.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side turns the part as joint.create would
joint.edit kept the joint's old angle when a side changed, so the part could turn by a half turn about its axis when the new origin's x lay the other way. When a side moves and no angle is given, the angle is worked out again as joint.create does (the least turn from where the part is now); a relation's angle is its tilt and stays.
The mechanisms reference says joint.edit takes a and b.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: pre-fill sides by name, send the angle only when changed
A side shows the face or edge its snap names, the piece nearest its stored pick when the name has several, else the one nearest that pick; it no longer searches outward from the frame origin, which could show the plate beside a hole for the hole's wall. A point or frame side shows nothing. OK sends the angle only when the user changed it, so a side moved without it turns the part as joint.create would.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side leaves an angle expression alone (#9686)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9465
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)
The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.
A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8510
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: drag the labels away from the part (#8510)
The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9105
* Sketch: alignment guides from any hovered point while drawing (#9105)
While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9130
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: a Joints folder under each placement lists the joints that attach it (#9130)
Each component placement in the Browser gets a Joints folder (closed at
first) listing the joints whose Component 1 or Component 2 is that
placement, each beside the placement it joins it to. The rows are the
root folder's joints: click picks, the eye hides the glyph, double-click
edits and the menu is the joint's menu. The root Joints folder is
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: written to disk in the frame they change, not only at a clean exit (#8275)
eframe saves app.ron every 30 s and when the window closes normally. A
change made since the last save was lost whenever the app didn't close
normally: ended from the Task Manager, stopped by a sign-out or shutdown,
or crashed or hung in the graphics driver on the way out. The next start
then showed the old settings (View navigator back to Axes, Display quality
back to Normal).
The desktop app now writes its settings and flushes them in the frame they
change (frames with input and the one after), as the web app already does
(#8644). Unchanged settings are not written again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: write at most once a second, and only after input that can change them (#8275)
Review: pointer motion came in every frame while the mouse moved, so the
settings were serialized every frame; and some settings change in every frame
(a panel's width while its edge is dragged), which would have flushed app.ron
on the UI thread each frame. Only clicks, keys, text, paste, wheel and pinch
count as input now, and the file is written at most once per second: a change
made in between waits, a repaint is asked for when its second is over, and it
is written then, so an idle app still writes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9062
* Sketch drag: a line is never shrunk to a point to follow the cursor (#9062)
A line's end on a horizontal construction line through the origin, dragged
up off it, made the construction line vanish. A horizontal row is
b.y - a.y, which a line a hair long meets at any tilt, so the drag's held
solves met the point-on-line by shrinking the construction line: to 1e-5 mm
on the first frame, 1e-7 mm by the tenth, and the end went up.
A drag step (held solve, the tangent-ends-held solve, and each cursor
correction pose) that shrinks a line or circle from over 1e-3 to under
1e-4 now counts as failed, as a step that wraps an arc does. The end then
stays on the construction line, which keeps its length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9034
* Assistant: say when an installed agent can't start, and how to reinstall it (#9034)
An agent whose program is found but fails its `--version` check without
printing a version (npm's opencode.exe left as a placeholder when the
package's setup script did not run, which Windows refuses with "not
compatible with the version of Windows you're running") was listed like
a working one, and connecting only said "The agent stopped." with the
system's message.
Discovery now keeps why the program did not start: the spawn error
(Windows' `%1` replaced with the program) or, through a `.cmd` shim, the
first stderr line or the exit status. A probe that times out still says
nothing. The picker shows "Installed, but it does not start: ...", and
connecting first explains it with the agent's install command and Refresh.
The control channel status carries `problem`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9696
* Show an edited Free Move its stored turn as the X/Y/Z angles that remake it (#9696)
* cargo fmt
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9142
* Exploded View: grey it out until the design has two components (#9142)
On a part made of plain bodies (the sample plate) Exploded View opened its
dialog and failed on OK with "an exploded view needs two or more
occurrences". The command is now disabled until the design has two or more
occurrences, and its tooltip says why and which commands make components.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9624
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Control channel: document.inspect reports undo, redo and path in the app (#9624)
The app answers document.inspect on a scratch copy of the session, which
has no undo or redo history and no file path, so the reply always said
undo 0, redo 0, path null. Take those three values from the live session
and put them into the reply.
Fixes#9624
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #1044
* Continuous orbit turns about the Orbit around point (#1044)
With Orbit around set to the point under the cursor (or the origin), Continuous
orbit still turned about the view's centre. Cursor orbits move that centre off
the model, so the model swung across and out of the view while it spun. The
spin now turns about the origin, or the model point in the middle of the view
(else the middle of the bodies in view), held from start to stop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9457
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Keep the sketch pane still at fractional display scaling (#9457)
Right-docked cards were placed by their right edge from last frame's
measured width, which flipped by one physical pixel each frame at
scales such as 125 % in the Docked layout. Place them by their left
edge from the width they are held to instead.
Fixes#9457
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #9731
* Sketch Extend: only an end on a circle counts as held (#9731)
grow_line's on-circle test was true for every point inside the circle; test distance to the circle instead. Also pin the new end point of a held-end extension onto the curve it stops on, as the free-end path does.
* Fix regression test harness usage and held-end setup (#9731)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
construction_visible checked the item's own hide and its folder, but not
the placement its component is drawn at, so hiding Part:1 left Part's
planes, axes and points on screen. It now asks feature_placement_visible,
the check sketches already made; the placement path is computed in one
place for both.
* Arabic: colour key wording in the viewport analysis status help
* Arabic: tanween and direction-neutral wording in the browser eye position note
* Arabic: outline wording and no direction mark in the print face highlight tip
* Arabic: sketch term in the constraint glyph note
* Arabic: checkbox wording and discard verb in the parameters apply-live option
* claim: #9680
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: drag over the eyes to show or hide many rows at once (#9680)
Press an eye and drag up or down over other eyes: each eye the pointer passes
takes the first eye's new state (shown or hidden), and the whole drag is one
undo step. A plain click is unchanged. Dragging near the list's top or bottom
edge scrolls it. A component's eye now goes through browser.visibility, so it
is undoable like a body's.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: fix the eye drag's undo merge and layering (#9680)
Merge the drag's steps from the undo depth noted at press, when the design
and visibility still match, instead of searching the history. Run the merge
every frame from logic(), so a release under an overlay is never missed. An
eye under a popup or tooltip no longer takes part in the drag. Adds a
regression test for a drag from the Origin's eye after a show.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: say when the eye drag's undo merge gives up (#9680)
Co-Authored-By: Claude <noreply@anthropic.com>
* Gallery test: the eye-drag state key is not a renderable element
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5bb43bdb1 jyviko: CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
- d23c37027 jyviko: Tests: the known-failing list takes develop's 10 failing tests
- e18fb40d8 jyviko: Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
- 9b58a5170 jyviko: Sweep path: a curve of several pieces is turned round whole
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9060
* Ribbon tooltips: help for the Assemble and Insert tools and the Create primitives (#9060)
56 commands get the two-sentence help under their tooltip, in English,
German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and leave the
backlog: every Assemble tool (components, joints, contact, motion,
position), every Insert tool (files, images, 2D, library, links) and the
Model > Create drop-down primitives (box, cylinder, sphere, torus, cone,
coil, pipe, thread, rib, web, emboss, boundary fill, bounding solid).
Their drop-down rows now show a tooltip as well. The help tests use
sketch.trim as the undocumented example, since solid.rib has help now.
* claim: #2153
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Zebra: flat faces keep one stripe colour while the view turns (#2153)
A face whose normal lies in the upright plane through the view (every
horizontal face) reflects straight ahead, where the zebra's sideways
coordinate is zero: exactly on the edge between a black and a white
stripe. Rounding then picked one or the other from frame to frame, so
the face flickered while the camera orbited. Straight ahead is now white.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c19500fce jyviko: Fillet: the radius-too-large choice in plain nouns
- b75d17667 jyviko: kernel: a round that would cut through its wall into a hollow is refused
- 795394417 jyviko: Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
- a26d3ee41 jyviko: xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 62fe29dbd jyviko: Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
- 571d711c8 jyviko: kernel: the re-blend's removed picks formatted as rustfmt lays them out
- 2fab94991 jyviko: kernel: blend_smlib laid out by the 2024 edition's rustfmt
- 38fd4a4f6 jyviko: Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- b0568524b Brett Lawson: smlib: solidcore's four new fork-carried opt-ins are on; the trimmed face tight box waits
- a2d5971be Brett Lawson: smlib: the quarter-cylinder sheet offset and the half-disc extrude match the C++ kernel on solidcore
- 509209838 Brett Lawson: solidcore: move the pin to afcee131a (main, with solidcore#1594, #1674, #1595)
- c9fcf82a5 Brett Lawson: smlib: solidcore's four new fork-carried opt-ins are on; the fillet trim status waits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cdff4ac7c jyviko: engine tests: probes ask for the exact point class
- 7ca072ec6 jyviko: ui, cli tests: probes ask for the exact point class
- a85d22e60 jyviko: kernel: Body::contains, the mesh test, is gone
- baf51b271 jyviko: kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 9a901d136 Brett Lawson: smlib: tag history on solidcore is one application Tag per object, with the capi's handlers
- fecd4bee3 Brett Lawson: smlib: an extruded profile's arcs on one circle sweep one wall face on solidcore
- 5f7a21157 Brett Lawson: smlib: the half-disc extrude's C++ comparison cites solidcore#1477
- f64857f95 Brett Lawson: solidcore: move the pin to 15e72dff9 (main, with solidcore#1752, #1495, #1796)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 63864b298 Brett Lawson: smlib: solidcore's five new fork-carried opt-ins are on; the trim end-span opt-in waits
- 494a08de1 Brett Lawson: smlib: history on solidcore: a face whose edge is only cut by a vertex is Kept (fork 1c7accd)
- ccfa37a9b Brett Lawson: solidcore: move the pin to bba8d8798 (main, with solidcore#1747 application attribute handlers)
- 8d47118ff Brett Lawson: smlib: solidcore's three new fork-carried opt-ins are on; the blend-curve revolve opt-in waits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 20c0c2ffc jyviko: Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
- 56d39a576 jyviko: smlib: Brep::classify_point says exactly where a point lies against a body
- 7b3e66cba jyviko: kernel: Body::classify_point decides inside, outside or on the boundary exactly
- 3b88f1acc jyviko: doc: a hole decides whether it exits at its drill point's shoulder exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- cf2a15ace Brett Lawson: smlib: solidcore's four fork-carried opt-ins are on; only the trim base v opt-in waits
- c3f5bb40b Brett Lawson: smlib: a draft on solidcore keeps the body's tags and face history
- cd25e9e8f Brett Lawson: smlib: a face section on solidcore cuts planes, cylinders, cones and spheres too (solidcore#1769)
- 9c1f8904e Brett Lawson: solidcore: move the pin to 43ed10e54 (main, with solidcore#1650, fixing #1631)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6f0bf0dea jyviko: Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
- 3772a6e97 jyviko: kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
- 9308224ef jyviko: Fillet rig: the knife edge's 0.5 chamfer builds
- 58e0d8346 jyviko: Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 04955683f jyviko: Tests: a strip's tangent and curvature run-offs are the distance long across the surface
- 4f64a035a jyviko: kernel: one smooth angle, and a round too small to change the part is refused
- c23ef9d93 jyviko: Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
- 6f7172dc8 jyviko: kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9760feed4 jyviko: Kernel: a body's record of rounds goes with its history, and can be read back
- f3cf0c4f3 jyviko: Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
- 134a34f89 jyviko: Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
- 456e5b7fa jyviko: Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8ed4663ae jyviko: Mesh convert: a reconstructed bore is one wall, so the bracket has 9 faces
- 6d8e002f8 jyviko: UI: rim and wall picking tests for a circle of arcs that is one wall
- 3e5b358af jyviko: Fillets: a later round at a corner where earlier rounds meet blends them again with it
- 5d1b18f40 jyviko: Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ae53d387 jyviko: Preferences: metric tapped holes drill only the tap maker's drill
- a71450aeb jyviko: Preferences: symmetric surface extrudes read only the total distance
- 26b42048c jyviko: Preferences: the Body check note says each option in one short line
- 2c1901371 jyviko: kernel: the record test takes the one wall a circle of arcs extrudes to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 709765fca jyviko: Model cache: a saved model records its body check mode and is adopted under it
- 393c83c2a jyviko: STEP import: a solid the kernel refuses, its faces too, is refused with the reason, never a mesh
- 6700e6ef1 jyviko: kernel: a body SMLib keeps in the record's order is mapped, whatever order its export lists
- 222211de4 jyviko: Model cache: a thinned model keeps the check mode only as the model records it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e43fe1ab0 jyviko: Kernel rig: diagnostics.validation is a setting, exempt from cases
- b24d90269 jyviko: doc, ui: a feature that lost a reference asks for it to be picked again
- d62d248b7 jyviko: doc: Untrim's face points pick faces of the body it untrims
- 1b08d4b8b jyviko: doc: a feature's face points are named on its own component's bodies first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5d80fc571 jyviko: Engine: diagnostics.validation reads and sets the mode
- 1a93a3977 jyviko: CLI: run and kernel-cases take the validation mode
- 50501fe14 jyviko: Preferences: Body check, once per feature by default
- 6a133042c jyviko: Preferences: the body check is the kernel's, not named after SMLib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 292ec65c8 jyviko: Fillet rig: the chamfer running into the openings is named for what it does
- 051a7b714 jyviko: Kernel tests: rustfmt
- 4030b795c jyviko: Kernel: a validation mode decides when sweeps, booleans and blends are checked
- 9acbcf924 jyviko: Evaluation: under each_feature a feature's kept bodies are checked once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b4af45dd0 jyviko: Kernel rig: the horn torus and the circle revolved touching its axis build
- f1199f89b jyviko: Joint drive: contact is decided on the exact bodies, not their display meshes
- 3a2fac31a jyviko: Kernel tests, fillet rig: a chamfer as wide as its rim builds
- 1878274cb jyviko: Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e46359ff0 jyviko: Kernel rig: the patch cases the fill now builds come off the known-failing lists
- 7c9e5ec69 jyviko: kernel: a seam held as two edges is one join, drawn whole in the shaded view
- 12496c2c1 jyviko: Tests: a round flange stays an exact circle through unfold, refold and DXF, with a cut near its rim
- 7fe880a7b jyviko: SMLib: pin f8fd83e (tangency-labs/smlib#66)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 5314031ba Brett Lawson: smlib: solidcore's tangent-face edge check and horn-torus revolve opt-ins are on
- 81088bf0c Brett Lawson: smlib: a sweep along a bent path is tested on solidcore (solidcore#1628 is fixed)
- a6b280467 Brett Lawson: solidcore: move the pin to 3569b5d73 (main, with solidcore#1665, #1681, #1614, #1677)
- 0bed45d82 Brett Lawson: smlib: solidcore's planar thicken side walls opt-in is on; four opt-ins wait for the fork
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5941c0d0 jyviko: geom: a general fill's crown fills out to the side its neighbours' normals face
- f7409dd59 jyviko: geom, kernel: a loop with fewer than three corners is filled by a ring of patches
- c088cf43e jyviko: geom: the patches about a centre are solved the same to the last bit on every run
- 25e275722 jyviko: Tests: a patch's continuity g3 is valid, g5 is the hostile word
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49377d318 jyviko: geom: patches about a fill's centre join G1 there, with the linear gluing function
- 55cb6b32b jyviko: geom, kernel: the patch fill's sides run from corner to corner, not edge to edge
- 62d41a0cf jyviko: Tests: the fill tests evaluate a face's (u, v) on its NURBS form
- 30b12cea8 jyviko: geom: a crowned height field rises by the whole crown at its box's middle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5732b62ec jyviko: Tapered extrude: the end check of a profile with holes takes the section a swallowed line leaves
- 738f336e1 jyviko: Raytrace: a closed box dielectric is certified from its mesh's geometry, in any tiling
- 9243b6550 jyviko: SMLib history: a split line between two pieces of one face comes from nothing
- 013978724 jyviko: geom: the patch fill's cross-boundary targets agree with its corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fb5ae6cdd jyviko: SMLib import: an extruded circle's circle comes from its widest span, not the face's range
- 17a466e6b jyviko: Ruled surface: a free strip on a straight edge gets a far curve that can bend
- f2982b47a jyviko: Sheet tests: the tiny cut inside the exact circle is above SMLib's modelling tolerance
- cf40a3e6c jyviko: Boolean regression test: the raked wedge's R4 rounds the four edges the issue picked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0b7468729 jyviko: Curvature comb: every comb shown at one scale, kept by the command
- 6ab96c658 jyviko: View analyses: one toggle group, its state in the session
- 9a45d4248 jyviko: Kernel rig: inspect.analysis is a display analysis switch, exempt like the others
- 8d590c198 jyviko: Kernel tests: the long-setback G2 patch's reach past the box from its exact surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfa84e84d jyviko: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly
- 6cc759750 jyviko: SMLib import: an extruded circle is a cylinder over the face's trimmed range
- 9b3572797 jyviko: Fillet rig: the known-failing list names the report- cases, not their old ids
- 9851718ea jyviko: Curvature comb: purple envelope and orange teeth from their own theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 2d84f8a17 Brett Lawson: smlib: solidcore's new opt-in fixes are on: sliver iso curves degenerate, Coons corner patches tangent to their sides, a fillet's own edge kept at a corner patch, the corner ball centred where the axes meet, one solution for a seam point, 2D boolean covers of far faces, area only between solid and void, a coincident definition split across the split point, the tight box from the interval's knots, overlapping bands refused, and the SSI tangent-curve tracer
- 0877278d6 Brett Lawson: solidcore: move the pin to 2b81c033 (main, with solidcore#1640, #1623, #1655, #1673, #1668, #1662)
- 97a475d8d Brett Lawson: smlib: solidcore's torus check and step-wall opt-ins are on: the torus check reads its V interval, a spindle torus through its apex is a self-intersection, and a local operation builds the step wall between tangent faces moved apart
- f4eec76b4 Brett Lawson: solidcore: move the pin to dca3135cc (main, with solidcore#1630, #1632, #1649, #1664)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c9bf97ce4 jyviko: Blends: an edge is smooth only where its faces are tangent all along it
- 1e6c91a10 jyviko: Fillet rig: the concave arc where a bar's top meets a cylinder its sides run tangent into
- de9c005f2 jyviko: Blends: a blend face is named by its picked edge, not an edge it took up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf85e0a6c jyviko: Fillet rig: the knife edge's R2 round builds on the new SMLib pin
- 739e47b9d jyviko: Kernel tests: the basin rim chamfers check the kernel's refusal kind, not the named size
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94938b3b5 jyviko: Kernel rig sources: the kinds of the four sources the new cases cite first
- 191fa9839 jyviko: Fillet rig: the R7 round past a thin wall's inside corner held to its exact volume
- ecbca1f74 jyviko: Fillet rig: grade the 851 rows' rounds G1 at their own tangent seams
- 30dce7fba jyviko: Fillet rig: the sloped basin's rim loops with their mitred corners' exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8b9e0e0c0 jyviko: Continuity rig: an opened tube end capped G1 and G2, as cases
- 24a58066c jyviko: Sweeps rig: a circle touching its axis revolved a quarter turn, as a case
- 51316b7ec jyviko: Import rig: the horn torus quarter written to STEP and read back, as a case
- 8524458ce jyviko: Tests skill: when a check is a unit test and when it is a rig case
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 368b34e3b jyviko: Tessellation: a curved face's grid reads the quarter turn from its surface, not its parameter
- 9da160892 jyviko: Tessellation: two corners of a face a hair apart, within their tolerance, are one point of it
- 7cbbe2bc2 jyviko: Tessellation: two curves that touch within the chord tolerance share nodes, so the face pinches there
- 95f1258b7 jyviko: Motion interference: a collision is deepest where the parts share the most volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c1328212d jyviko: Tests: curved bodies' contact stop is checked, not the sweep's internal step
- 172c64cef jyviko: Tests: the naming corpus checks that references resolve and builds agree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ea43b5c2 jyviko: Tests: a tray's sheet names are checked by where their points lie
- 978ae1d51 jyviko: Tests: a mirrored sheet's flat pattern is its source's mirrored, as the code makes it
- 2be7b1b6f jyviko: Tests: the extruded ellipse is checked by its area, not its face count
- 51855589d jyviko: Tests: Open in EasyPrint's STL is read back, not measured in bytes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4d7553dd8 jyviko: Kernel tests: a ruled strip's moved handles are checked on its far curve
- 21c1ed541 jyviko: Kernel tests: rim rounds meeting at a concave corner are mitred, not swept
- 03054211b jyviko: Tests: the arc-touching cut is checked by its volume and area, not its face count
- 5e7e1485c jyviko: Tests: the knife-edge R2 fillet is checked once, in closed form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5229bbedd jyviko: Kernel tests: a small bend's display mesh is graded on the display mesh alone
- 4ff38619c jyviko: Kernel tests: the rounded shell's planar roles are graded by name and exact volume
- a3848d1d0 jyviko: Kernel tests: modifier histories are graded by what each face is, not how many changed
- a45d56aa9 jyviko: Kernel tests: the slot plates' STEP files are graded by their bounds and volume, not surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a0c24b87c jyviko: Kernel tests: the back edge then the arc is one more pair of the rounds-in-sequence test
- c69dbc5d3 jyviko: Kernel tests: the collapsed taper's mesh is held to its B-rep, the taper to validity
- 87e9123d3 jyviko: Kernel tests: a crowned patch's hostile crowns are refused for their range
- 65718cd41 jyviko: Kernel tests: the five- and six-sided fills are graded by what they make, not their face counts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3569298a4 jyviko: Kernel tests: a chamfer whose leg runs off the thin rim is refused, naming the largest
- a8f393ca3 jyviko: Kernel tests: the tabbed plate's rim rounds take their exact volume
- 5af467aef jyviko: Kernel tests: the box rounded after separate bottom rounds takes its exact volume
- 659bd866b jyviko: Kernel tests: the #871 part's fitting rounds take their exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2f88ca2f6 jyviko: Kernel rig: everyday chamfers of box edges and pocket rims
- 51641123c jyviko: Kernel tests: drop the mixed arc-and-line mitre test, the rig's 485 grades it
- e9963439b jyviko: Kernel tests: the round into a hole moves to the rig, with the hole cut the test's way
- 65e46a962 jyviko: Kernel tests: a round as tall as its wall and more builds on the disc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01d0d6bb9 jyviko: SMLib bindings: a curve list holds up to 16384 curves, as the C API now takes
- 96b248d28 jyviko: Kernel tests: a slot narrower than the taper closes partway up and builds; a closing hole is refused
- 42d4d0ecd jyviko: Engine tests: rounding the long edge then the left upright matches the three edges their chains take
- b66821c82 jyviko: Kernel tests: the third round at a mitred corner takes its tangent chain, a sphere octant
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 785b78bea jyviko: Surface Fair test: fair the B-spline patch on a saddle rim, not an offset sphere
- 1817cffaf jyviko: Shell: a basin shelled past its 4 mm rim measures its exact sharp offset
- 2e123eb3d jyviko: Kernel tests: a swallowed tip's volume is the drafted wedge's, every wall at the taper
- 1661fe292 jyviko: SMLib: pin 985faae, the batch of 2026-10-30 evening (tangency-labs/smlib#63–#65)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 3346f4172 Brett Lawson: smlib: solidcore's new opt-in fixes are on: UV trim checks on the surface, loop orientation from the loop's box, cones extended as themselves, the local operation's box, joined drop pieces, exact edges on analytic faces after a shell, and the two SSI trace fixes
- 271f0a39e Brett Lawson: smlib: a face's planar section runs on solidcore, as the capi's smlib_face_section (solidcore#1534)
- 436fae56a Brett Lawson: smlib: drafting a cylinder's side runs on solidcore (solidcore#1606, fixed by #1611)
- 39adb66ad Brett Lawson: solidcore: move the pin to 55748ecf (main, with solidcore#1648, #1645, #1644, #1641, #1639, #1637, #1636, #1634, #1657, #1656, #1654, #1653, #1652, #1651, #1598, #1622, #1618, #1616, #1603, #1626, #1661, #1658, #1660, #1629, #1663: attributes through offsets, shells, booleans and copies (#1462 P2, P4), the tight box from the interval's knots (#1054), a merge's UV trims named after their edge use (#435), SM_API ordered-point surfaces, exact projection copies, and the fork's WR-562, WR-547, WR-546, WR-541, WR-537, WR-536, WR-535, WR-533, WR-542 and WR-75 opt-ins)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 97d79e3b8 Brett Lawson: smlib: the solidcore tag test names what still holds it back
- 6a3558a96 Brett Lawson: smlib: a sweep along lines and arcs goes piece by piece on solidcore, as the capi does
- 1feba5af9 Brett Lawson: smlib: the bent-path sweep's ignore cites solidcore#1628
- 9ceddd9d5 Brett Lawson: solidcore: move the pin to 937a6319 (main, with solidcore#1534, #1537, #1544, #1617, #1608, #1582, #1591, #1625, #1586, #1619, #1620, #1611, #1647, #1646, #1643, #1642, #1638, #1635, #1633: planar section curves, SM_API intersections, cut, HCR silhouettes on solids, UV trim checks on the surface and tiny loops oriented, projection, trimming, tessellated boundaries and knot removal, the fillet refusal that leaves the body unchanged, Cone::lean_cylinder as a cone, and the fork's WR-260, WR-550, WR-545, WR-543, WR-80, WR-534 and WR-532 opt-ins)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 73b053221 jyviko: Face capture test: extruding a split face in an uncaptured component is refused
- 918429c6d jyviko: Sheet machining: a trimmed To Object tool is measured as the prism its record proves
- f37b95498 jyviko: Native B-rep: a body is written as it serializes, not through a JSON value
- 298869f4d jyviko: Engine tests: the hostile-parameter test builds its starting model once per command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01477bb14 jyviko: Tests: the saved curved strip is the link a truck build saved
- 0c4f54edf jyviko: rustfmt
- 74001e532 jyviko: Tests: check what each operation is for, not how many faces it makes
- a84369fe7 jyviko: Sheet convert: a wall cut off at its strip keeps each corner with its own edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- c8adedaec Brett Lawson: smlib: solidcore's new fixes are on (taper tangent corner planes, holed revolve void, loose tangent edges refused, scaled extrusion origin zero, booleans skip faces apart)
- 744f7574d Brett Lawson: smlib: drafted extrudes keep their corners and curve sweeps keep the profile where it lies on solidcore (solidcore#1449, #1450)
- dafb25b4b Brett Lawson: smlib: the body check reads a Caller body's recorded keys on solidcore (solidcore#1584)
- 2ad118666 Brett Lawson: smlib: curvature-continuous rounds and corners left open on solidcore (solidcore#1438, #1439)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- a69016f21 Brett Lawson: solidcore: move the pin to e4379b45 (main, with solidcore#1573: the #1024 rail-through-boundary-vertex test, plus the CreateCurveApproxPoints and PolyBrepCopy ports)
- 2308fa5be Brett Lawson: solidcore: move the pin to ddfb3895 (main, with solidcore#1569 and #1533: the 3x2 mixed corner at a concave unfilleted edge, and SmSurface::ApproximateSurface)
- f23aa76d3 Brett Lawson: smlib: an offset or other non-NURBS face surface exports through ApproximateSurface on solidcore (solidcore#1441), and the new fixes are on
- d4cec2ca9 Brett Lawson: solidcore: move the pin to b2450cbf (main, with solidcore#1568, #1579, #1581, #1585, #1597, #1604, #1600: attributes through booleans, taper corner rules, the curve sweep, check_brep naming, fillet thirds and corner marks, WR-302)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf74dcbbe jyviko: Tests: a round wall is one face, its name without a piece number
- 8f914ddd2 jyviko: Tests: the saw cut's halves named after their faces, listed in the kernel's order
- 1a5a3b5eb jyviko: Tests: an extended cylinder strip stays one face in every mode
- a3f150257 jyviko: Tests: the tapered bosses' volume in closed form, not truck's measure
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ec4eebaa8 jyviko: sew: a folded pcurve has no piece shorter than it lifts onto its edge
- 1bc8b204f jyviko: Kernel tests: a circle is one closed arc, a round wall one face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 41206c065 jyviko: Sheet metal: a whole circle in the outline is sewn as its two exact halves
- 374d3b7e8 jyviko: Sheet machining: a depth an ulp off the sheet's face is on it
- 909f9a20e jyviko: Sheet face names: a triangle takes a flat face's name only where that face faces its way
- ff9ccaf1e jyviko: Sheet tests: the DXF outline and the folded volume as the exact flat pattern and measure give them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ae748417 jyviko: Robustness: seed 5's edge-only join keeps two bodies, as joins have since 94ee28d5c
- 48d72ba2b jyviko: Convert Mesh: a triangle of no area is dropped, not refused (#4561)
- a0a75dc78 jyviko: Kernel rig: import/4561 passes, off the known-failing list
- beaed5b35 jyviko: Kernel rig: threads/2369 names the tap maker's 6.8 mm drill for M8
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4ebc3d078 jyviko: UI tests: the thread catalogue's error and Press Pull's hole wall as they are now
- 2debdd87a jyviko: Pi case test: each standoff is four faces, its walls one face each
- db757efc7 jyviko: Tests: the pi case and the hole wall read as on green-truck-era-tests, so both branches agree
- 191c1b855 jyviko: Fair: a net of up to 128 x 128 control points, the band bounding the solver
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8b45f277 jyviko: STEP import: a void reads as a cavity whichever way its shell flag points, again
- 64188ce43 jyviko: Planar regions: a hole goes to the material that holds it, read closer than the hole lies
- 1a0289011 jyviko: Planar region tests: edges on one line are one edge of the result
- 514426e5d jyviko: STEP import: a closed spline a face lies across the start of starts clear of the face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c47c1d26a jyviko: Tests: the fit and taper tests use geometry that still doesn't fit
- 8c37bc756 jyviko: Fillet rig: R10 past the full round is refused naming 7.5 mm, as the case asks
- a100c7c06 jyviko: Loft rails: a station grows about its section's centroid by length, not the mean of its control points
- e5476706b jyviko: Issue 616 test: the lid's volume is its closed form, 6703.5344
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b779364 jyviko: Tests: a point path's sweep has a wall along each line; coplanar walls join at a corner
- d945cf53a jyviko: Fillet and chamfer: a refusal as too large names the largest size that fits
- 8bcd81244 jyviko: Tests: a blend refused as too large is SMLib's NO_ROOM, in its own words
- deaf8e679 jyviko: Tests: convex blends past a cliff are cut from the part, as the owner decided
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b9d0a3308 jyviko: Mesh memo test: SMLib's booleans mesh neither operand
- b6c3bf3c5 jyviko: Face capture test: an Offset Face's top is anchored by its exact history name
- 1ee5f1af3 jyviko: Kernel: a mitred sweep carries a slanted section all the way to each mitre
- 1e4b64402 jyviko: Provenance: a sweep's origins are the ones it recorded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 15c31a96f jyviko: Kernel: planar source lineage finds each face's support through an index, with no budgets
- 049b2bc40 jyviko: Lumps: a face-source table of another length is refused, never sliced
- f60bf96df jyviko: Planar sources test: two bodies side by side joined as the record requires
- e1b762c4b jyviko: Booleans and Shell keep the lines faces were split along on purpose
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ffb1e650d jyviko: Isocurve Analysis: count curves each way, evenly spaced across the face
- 177eb207f jyviko: Exploded views are shown only: the design's placements and Capture Position leave them out
- 8d72cfa59 jyviko: SMLib export: a face's outer area reads only its own loop's edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7e613b6f jyviko: Records: the item budget bounds input, not the kernel's own results (Refs #3992)
- cf2b3a62f jyviko: Fair Surface: a face of degree 1 one way fairs along its curved way, and a face with nothing free is left as it is
- 16d467e14 jyviko: Point and Plane Along Path: exact on the path's curves by arc length, and a t outside 0…1 is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97935eed8 jyviko: Inspect: the centre of mass from the exact faces, as Measure takes it
- d094d43f2 jyviko: Compare Bodies: each region measured exactly, on the cut of the two bodies
- 864bcbccb jyviko: Compare Bodies: a region the exact cut cannot measure has no volume and says why, never an estimate
- a1dbb7c08 jyviko: Kernel rig: the two G2 corner cases are graded clear of the vertices, as the ladder grades them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 80d08659f jyviko: Kernel rig: the booleans, import and threads lists name the 5 cases that fail on the pinned SMLib
- 5c45570c9 jyviko: Kernel rig: rustfmt; measured values in results are decimals, within tolerance; the ladder records 06/023 passing
- 393a9aab6 jyviko: CI: native and reference tests stay on pushes until develop is green
- 322ac2592 jyviko: CI: the release gate still calls ci.yml (workflow_call)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6af622978 jyviko: Threads: a taper thread's groove follows its crest cone across the section, so no sliver of the flanks is left
- 3f5efdf70 jyviko: Kernel rig: one results check, each {step, pointer?, json, rel?, abs_mm?}
- dc093b0cb jyviko: Kernel rig: a symmetric surface extrude with no convention is the total distance (#9091); the per-side reading is its own case
- 55338e139 jyviko: Kernel rig: each area's PATHS names only its own files, and EXEMPT lists only commands no case uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 0d3c46dad Brett Lawson: solidcore: move the pin to 6a068272 (main, with solidcore#1419 WP4: the level-2 AssertValid tests and SmSurfOfExtrusion::AssertValid, #1578)
- 41e902eaa Brett Lawson: solidcore: move the pin to 0ae36782 (main, with solidcore#1452: SolidError::sm_status and a port-invariant variant)
- c13d760fa Brett Lawson: smlib: a copy queried under the arena's identities is a port-side invariant (solidcore#1452)
- 76c755508 Brett Lawson: smlib: a call answers None exactly when solidcore's error stands for an SMLib status (SolidError::sm_status, solidcore#1452)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9fecf7709 jyviko: Kernel rig: interference and clearance between placed occurrences
- 22cd8e74f jyviko: Ladder generator: cases.py writes the values committed by hand for 05/007, 06/017, 07/016 and 11/003
- 487914427 jyviko: Ladder 05: UNC, UNF, Rc and NPT tapped holes, each drilled to its tap maker's drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3b7dabdb7 jyviko: Kernel rig: bodies moved, copied and extracted, designs inserted, occurrences copied, reparented, dragged and exploded land where worked out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7eb8a5d4 jyviko: Kernel rig: contact sets stop a drive at the block, touching faces don't, and edit, list, enable and disable do as coded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 489441907 jyviko: Kernel rig: motion studies play, plot and trace to known values; a crank-slider's slider follows r cos t + sqrt(l^2 - r^2 sin^2 t)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 236a5597e jyviko: Kernel rig: gears turn by their radii, a rack travels r per radian, a screw its lead per turn, a disc cam lifts 2e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0da95a8cc jyviko: Kernel rig: each joint type moves its part to the placement worked out by hand, limits clamp, as-built keeps it in place
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 445f6faa4 jyviko: Kernel rig: parameter cases, an expression in a sketch dimension and a cyclic one refused
- 2cd1a0335 jyviko: Kernel rig: an assemblies area, with the source files that rerun it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 305c36479 jyviko: Kernel rig: inspect cases, the gap between two spheres, their lens where they overlap, none past the clearance
- 4355e15df jyviko: Kernel rig: inspect cases, a box against a taller one and an identical one, and a tolerance out of range refused
- 7b1fbb57f jyviko: Kernel rig: inspect cases, the comb of a sketch circle and line and a cylinder edge, and nothing picked refused
- 5c80ef4ad jyviko: Kernel rig: inspect cases, three isocurves each way on a cube's top, and a count of 0 refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cacc394f9 jyviko: Kernel rig: inspect cases, the centre of mass and volume of a box, of a box and cylinder, and an unknown body refused
- f43a0c7ac jyviko: Kernel rig: inspect cases, the smallest radius of a fillet, an ellipse and a circular edge, and none on a box
- 311b57bb7 jyviko: Kernel rig: inspect cases, a fillet's seams are G1 with a 1/r curvature jump, a box edge is sharp, too few stations refused
- 58b384d7d jyviko: Kernel rig: inspect cases, the overlap volume of two boxes, none where they only touch, a box inside a box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ac12ba72 jyviko: Kernel rig: construction cases, where three planes meet, and parallel planes or planes through one line refused
- f72108895 jyviko: Kernel rig: construction cases, where two edges meet or come closest, and parallel edges refused
- 1acbf1e9c jyviko: Kernel rig: construction cases, a point on a vertex or another construction point, and no body refused
- 33e3b6379 jyviko: Kernel rig: the inspect area, what reruns it, and the analyses that only draw
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02ee36ce9 jyviko: Kernel rig: construction cases, the plane through parallel and meeting edges, and skew edges refused
- fbe540b40 jyviko: Kernel rig: construction cases, a point along a sketch line and arc, and one past the end held at the end
- a0bd94f4d jyviko: Kernel rig: construction cases, the centre of a circular edge, sphere, torus and sketch arc, and a flat face refused
- 8a8960f13 jyviko: Kernel rig: construction cases, where an edge crosses a square and a slanted plane, and a parallel edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0e3798ae jyviko: Kernel rig: construction cases, the midplane of parallel faces, of a corner, and of a plane with itself
- 3ff1347d9 jyviko: Kernel rig: construction cases, a plane through an edge or axis square to a plane, and a line along the normal refused
- 6fed4f996 jyviko: Kernel rig: construction cases, the tangent plane to a cylinder and a sphere, and a point on the axis refused
- 8be5341c7 jyviko: Kernel rig: construction cases, the plane through three points or vertices, and collinear points refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 776d979ce jyviko: Kernel rig: construction cases, an axis square to a flat face and to a cylinder through a point, and a point on the axis refused
- 84a326f16 jyviko: Kernel rig: construction cases, the axis of a cylinder, a torus and a circular edge, and a flat face refused
- 17c0aee44 jyviko: Kernel rig: construction cases, the line where two planes meet, square and slanted, and parallel planes refused
- f9c53503b jyviko: Kernel rig: construction cases, a plane turned about an axis in it, off it and along its own normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b8c6bb921 jyviko: Kernel rig: thicken a sheet into a slab and a tube, trim by a plane and by a circle, and refuse a stray keep_with
- 70f695c6b jyviko: Kernel rig: grade construction geometry and the numbers a command replies with
- 5c0db8e82 jyviko: Kernel rig: the construction area, with what reruns it
- ffd3d5fb1 jyviko: Kernel rig: construction cases, an axis on a straight box edge, and a circular edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75353cb04 jyviko: Kernel rig: extend, extrude, loft, patch, revolve, stitch and sweep surfaces, a normal case and an edge case each, with their exact areas and surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f861f44e1 jyviko: Kernel rig: a matched sheet meets its target's edge at the order asked, flat where both are flat, and a solid is refused
- 3d080e96a jyviko: Kernel rig: fairing leaves a flat patch flat and a face with no free control rows as it was; zero strength is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 425c8ed42 jyviko: Kernel rig: a blend between coplanar sheets is flat, a step blend meets both sheets at the order asked, and unchained edges are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ac95e47e jyviko: Kernel rig: a reversed normal sends a later thicken to the other side, and a solid is refused
- 680f2ee5c jyviko: Kernel rig: boundary surfaces through a square, a triangle and a network of four lines have their exact areas; five curves are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a01d82f30 jyviko: Kernel rig: untrim removes holes from a sheet, a cylinder sheet and a solid's face, and refuses a face with none
- b2cc77094 jyviko: Kernel rig: unstitch takes a box and a cylinder apart into their faces, or one face out, and refuses a single face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bc3c9185c jyviko: Kernel rig: grade the kinds of a result's surfaces, its B-spline degrees and spans, and its free edges
- 657c5af57 jyviko: Kernel rig: surfaces area; an offset plane, cylinder and sphere land exactly where the distance puts them, and faces across a sharp edge part
- 476b04ed3 jyviko: Kernel rig: ruled strips along a normal, at 45 degrees and tangent are the exact plane, cone and flat ring, and a closed chain mitres into a frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ba60bd9d jyviko: Kernel rig: plastic cases, bosses, lips and grooves, rests, a snap fit edge case and the plastic rules, each with its answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 67dd8892f jyviko: Kernel rig: bend table cases, JSON and CSV rows with angles, radii and K-factor allowances, and an unknown format refused
- 235645db5 jyviko: Kernel rig: the ellipse length's Simpson weights as a named step
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fce8e4a26 jyviko: Kernel rig: perforation cases, square and staggered fields counted hole by hole, a field kept clear of a bend zone, and a pitch refused
- c114e6c35 jyviko: Kernel rig: flat DXF cases, outline, cut and bend line lengths, an ellipse exact and as arcs, and no sheet refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2edf64952 jyviko: Kernel rig: hem cases, closed on a top and a bottom edge, open and flipped, on a flange, and one too short
- c60bcb55e jyviko: Kernel rig: path flange cases, a Z section, one line at 45 degrees down, and a path straight on refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 815711421 jyviko: Kernel rig: second cases for draft (two adjacent faces), rib (in plane), press pull (an edge), split face (sketch and tool face) and sketch projection (a face loop and a silhouette)
- acd7bb066 jyviko: Kernel rig: the boundary-fill crescent ends at the cusps, x = 5
- 45c955326 jyviko: Kernel rig: a case can check the files it writes and the commands' answers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e7810659 jyviko: Kernel rig: frames area, frame member and inserted profile cases with their exact sections, placements and a too-thick wall refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a5513a4e1 jyviko: Kernel rig: boundary fill cases, the lens and the crescent of two cylinders, and a point outside every tool refused
- f0eac58a2 jyviko: Kernel rig: align cases, face onto face as a move, a side face turned onto a top face, and a face onto an offset plane along its normal
- 1e9cefe1e jyviko: Kernel rig: web cases, two gussets in a channel's corners and two walls grown along the sketch normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af8f28e34 jyviko: Kernel rig: scale cases, a cube doubled about its corner, a sphere scaled into an ellipsoid of the same volume, and a zero factor refused
- e1724be62 jyviko: Kernel rig: pattern on path cases, bosses along a line, bodies turning with an arc's tangent, and instances past the path's end refused
- cf58e3735 jyviko: Kernel rig: replace face cases, a top moved onto a plane and a lower step raised to the higher top (fails today: SMLib offset of faces refuses closing the step wall)
- be4f15db6 jyviko: Kernel rig: bounding solid cases, two boxes with a margin and a sphere's exact box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d671bbbc1 jyviko: Kernel rig: every registry command has a case or an exemption (kernel-cases --coverage)
- 6701b1c5e jyviko: Docs: how the kernel rig picks its areas, how a new area joins, and the coverage check
- 585789c60 jyviko: Kernel rig: cone cases, a frustum on X and a full cone of negative height with their exact volume, area and centroid, and a zero height refused; a new solids area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e71177769 jyviko: Docs: the kernel rig gate, updating a known-failing list, re-recording the ladder golden
- d84d00bb4 jyviko: Release gate: the packages' dry run is unsigned and skips the release job
- 02e1f1841 jyviko: Kernel rig: each area runs only when the files its PATHS lists change, every area on the shared core
- b67e93211 jyviko: Kernel rig: an area's PATHS names only its own files, never the shared core
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 376bba92c Brett Lawson: solidcore: move the pin to 3c17ddb1 (main, with solidcore#1480: an intersection edge's end goes to its own vertex, and #1419 WP1's whole-body AssertValid walk)
- c191634b5 Brett Lawson: solidcore: move the pin to 7ca6ce7a (main, with solidcore PR #1427 SmBrep::LocalOperation, #1474 Nx1 corner, and fixes since 3c17ddb1)
- 9c7c139bd Brett Lawson: solidcore: move the pin to b19dbcb5 (main, with solidcore#1476: a shell's implicit offsets take every base upstream casts to a B-spline, and the offset sample bound scales with the input)
- 22a1c20b1 Brett Lawson: solidcore: move the pin to b3baca8e (main, with solidcore#1490 and #1491: a revolve's torus is never inside out and keeps the flag, and a one-circle full turn puts its seam at the profile)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6c5537df6 jyviko: Kernel ladder: a gate run fails on any case whose status or counts differ from the golden
- ee2a1ea06 jyviko: CI: maintainers' pull requests run the tests, and the reference tests run on pull requests
- b4fcd5910 jyviko: Kernel rig: every area and the ladder as a parallel gate on pull requests that touch the kernel
- 18d2dddac jyviko: Release gate: every check in full and in parallel before a branch replaces main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 53da86734 Brett Lawson: solidcore: move the pin to 2a47645e (main, with solidcore#1435: precise properties split at the surface's knots)
- cb79c32ee Brett Lawson: smlib: the curved primitives' measures, round trips and two sweep volumes run on solidcore (solidcore#1435 landed)
- 6e5722af9 Brett Lawson: solidcore: move the pin to fa3caa94 (main, with solidcore#1463: a revolve's cylinder is never inside out, and an inside-out NURB cylinder keeps its frame)
- 9c7e54be4 Brett Lawson: solidcore: move the pin to 43ca3745 (main, with solidcore#1473: SmShell::IsInnerShellOf, and #1419's level-0 helpers)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9008d13f3 jyviko: Surface Extrude: a symmetric distance is the total, as for a solid extrude
- de5c338e7 jyviko: Preferences: keep the older per-side reading of a symmetric surface extrude
- ac70662d6 jyviko: Sweeps: a path through a drawn 3D arc follows the arc, not a spline through its three points
- 7664925fb jyviko: Sketch: Project onto Surface keeps the side the projection meets first, in one curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bb4299e56 jyviko: Tests: a drafted cube side leaves the bottom and the opposite side Kept, the rest Modified
- 29adfd0d7 jyviko: Kernel tests: the barrel's side is the exact surface of revolution of its arc
- 5ada4fc8a jyviko: SMLib: pin 90aabff, a shelled round stays a cylinder and a step wall is ruled as its plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f3b77d71b jyviko: Tests: expectations for the SMLib fixes of 2026-10-29
- 567b764b9 jyviko: Viewport tests: the offset ellipse ring's 512 wall joins are all smooth
- 9d0fb564e jyviko: SMLib: pinned at 60b1c6a: the 43 fixes of 2026-10-29 (tangency-labs/smlib#14–#56)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c93b3ad5a jyviko: Engine tests: SMLib's builds where truck refused or approximated
- b6b59e7b3 jyviko: Naming tests: pieces of one name on a grooved disc, the merged boss wall by its point
- ac52443df jyviko: Ring tests: a cut's volume is the piece it took, not the difference of the ring's volumes
- de606715b jyviko: Placement tests: a body mirrored in SMLib reads back from its record valid
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- d35dcf022 Brett Lawson: solidcore: move the pin to 19d87ca7 (main, with solidcore#1442: walls that meet are refused as WALLS_TOUCH)
- 8493abc90 Brett Lawson: smlib: shell_walls_touch runs on solidcore (solidcore#1442 landed)
- 30d6331a5 Brett Lawson: solidcore: move the pin to 19587445 (main, with solidcore#1453: an offset edge between two analytic faces is their exact line or conic)
- f44e08128 Brett Lawson: smlib: shell_cylinder_open_top runs on solidcore (solidcore#1453 landed)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- f62d6ee6d Brett Lawson: solidcore: move the pin to 4cd55082 (main, with Ellipse::is_nurb_curve_circle, solidcore#1432)
- c11640214 Brett Lawson: solidcore: move the pin to f020a066 (main, with IsNurbSurfaceCylinder / IsNurbSurfaceTorus, solidcore#1433)
- c9b2c18eb Brett Lawson: smlib: circle, cylinder and torus NURBS forms come into solidcore (solidcore#1432, #1433)
- 04c2af035 Brett Lawson: solidcore: move the pin to 3546c9bc (main, with solidcore#1437 and #1445)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ee9fc3793 jyviko: Tests: a torus patch to thicken is cut from SMLib's one-face torus
- ca53656a2 jyviko: Schema tests: an empty face list is checked on the draft, which refuses it
- ab68a3d0f jyviko: View tests: the section cap test draws the cap in the cap colour
- 24bcaca03 jyviko: Engine tests: SMLib's faces, not truck's pieces, in the face counts and measures
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c341006a jyviko: Tests: a cylinder's side and a sphere are one face each, as SMLib builds them
- 6c9c679dc jyviko: Tests: a revolved sheet over one radian is one face, untrimmed over its whole span
- 8075b8f70 jyviko: Tests: a swept point path is its lines, and rails must turn with a cornered path
- b9d65e6bc jyviko: Tests: thicken across a sharp edge extends the offsets until they meet
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3c680d21a jyviko: Geometry: the closest point on a full circle just before its start is found before its end
- 30ceb44e6 jyviko: Tests: SMLib's faces, one per swept segment, closed along a seam, replace truck's halves
- 908bc756c jyviko: Tests: the matchsurf and mixed-fillet helpers read an edge on the curve its interval is on
- 98284eb1e jyviko: Tests: a box thinner than a body's tolerance may be refused instead of getting no certificate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 93bbde86e jyviko: Tests: a script keeps a fillet a parameter makes impossible, a radius below zero
- 913a61329 jyviko: Tests: a tilted cylinder's Intersect cut is checked on the cylinder, not by its mesh's count
- da4f122f4 jyviko: Tests: a face picked by point is found on a block of 256 drilled holes, as on #6720's thread
- d0daee90f jyviko: Tests: a cam's edge is picked on its rim, off the vertex where its circle's seam meets it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ff0dda537 jyviko: UI tests: picks that name one thing, and a thread that names its start
- 2523d13cf jyviko: UI tests: SMLib's cylinder has one wall and one edge per rim; split rims come from two arcs
- b71e5ae6f jyviko: Tests: edges are read on their NURBS forms, a chamfer's chain is its caller's, the cap test's hatch
- 138acad01 jyviko: UI tests: a frame member's volume is compared to the accuracy SMLib measures at
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 319e6b8b3 jyviko: Kernel tests: the chamfer on a tangent wall junction is measured on meshes fine enough
- 68a217d98 jyviko: Reference tests: the loft case is analytic, SolidCraft's correspondence with its closed form
- 73b028b5b jyviko: Kernel: a drafted extrusion of a profile with holes, every wall leaning on the material's side
- b2c5b1f5e jyviko: Designs before format 14: a split's pieces take the names its later features use them by
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a0c13910 jyviko: UI kit: a field's scenario handle is where the field shows
- 271f0c5de jyviko: STEP import: a face's loop through a pole closes its turn, so a dimple keeps its area
- 983b1ca8f jyviko: Sketch projection: a projected face's curves meet at the face's vertices
- 426a505a8 jyviko: Display meshes: tests count the planner's grids; a mesh's outline is one line per straight edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43c1b7b88 jyviko: UI tests: Isocurve Analysis's engine colour is drawn from the theme's accent
- 7bb5bb3d5 jyviko: Locales: Arabic and Hebrew for the version and section hatch labels
- e657e4086 jyviko: UI kit gallery: entries for the controls added without one
- 6a6cd8f56 jyviko: Sketch: a sketch's bounds reach its circles' and arcs' extremes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 23bfa1cf7 jyviko: Tests: the saved fitted-letters design measures its closed form, its letter as conics
- 0e3f01ec0 jyviko: Tests: a loft cut whose top is the basin's whole outline leaves the walls above as their own body
- b3dfcf1ff jyviko: Tests: an engraved face's letters project as conics, their exact quadratic Béziers
- 367beae69 jyviko: Viewport: the analysis legend stays above the floating History card again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a94a025c jyviko: Tests: freezing rebuilt arc borders gets its rebuild from a notch across the arc
- 5cbfbe35d jyviko: Tests: interference lists the pair of a solid and an imported mesh as not checked
- 5489599c0 jyviko: Tests: a face with no attachment is a rib's wall, whose feature reports no roles
- f5dfb78ee jyviko: kernel: a cut's tool face blocks a planar role only where it enters the result
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a31272194 jyviko: Sketch: an included 3D edge keeps its exact curve from the moment it is linked
- 1fb5e94da jyviko: Tests: Intersect's box outline is compared as lines, and a tilted cylinder's whole rim projects to its ellipse
- 9be29894e jyviko: kernel: a cut by a tool apart from the body is the body itself
- 2b0357a22 jyviko: kernel: two planar supports are one when SMLib would call them coincident
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fcd5f7997 jyviko: Tessellation: a node lying on another chord is untangled like a crossing
- 43ad9d0b0 jyviko: Tessellation: a slit (a side the loops run along both ways) bounds the face on neither side
- 534dffa96 jyviko: Tessellation: the band beside a slit and the sag refinement keep the face on both sides of it
- 7b984936a jyviko: kernel: an emboss's arcs run on their wall's own frame, and its seam is read from the circle's angles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f9347aca7 jyviko: Tests: the mirrored union's volume held to the two integrals' 1e-8 accuracy
- bb0b146a9 jyviko: Tests: #1510's parts are weighed by their exact volumes, not 1e-3 mm meshes
- d5bd1ebfd jyviko: Bridge: a support surface's shape read about a station in its middle has the right signs
- a6054603d jyviko: Tests: fillet removals from exact volumes; SMLib's rounds match Pappus and the quadrature
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a780de5f jyviko: Tests: the helical groove's removed volume from the cut's exact volume, not a 0.01 mm mesh's
- 80b7ce28e jyviko: Tests: volume checks held to what their measures can tell, not tighter
- a3e42e548 jyviko: Tests: the cap whose loops prism_measure compares is found by its plane, not as the last face
- fad9c44da jyviko: kernel: measure integrates to SMLib's finest accuracy, 1e-8, not 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 666ccd85d jyviko: Tessellation: sag refinement splits a flat triangle's long side and never across an obtuse one's short side
- 2b22b2cbe jyviko: Tessellation: a face's sides are flipped where the triangles lie closer along the surface the other way
- e0d5ee496 jyviko: Tests: thicken and raised-band histories checked as SMLib reports them, Meet edges and seams included
- 39e1dcea0 jyviko: Faceted boolean: a body's own mesh is closed once its faces' shared corners are one vertex
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ec4b7212 jyviko: Tests: a face's flat area may differ from its surface's by the sails its boundary chords bridge
- 4626f83e5 jyviko: Tests: a sketch curve splits a cylinder's one side face in two, not a half side
- 9e97bc470 jyviko: Tests: a split face without its record exports as the body has it, and the next operation joins it
- 47b1d716d jyviko: Tessellation: a whole sphere's loop starts off its poles when its seam has two segments
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8eb77affb jyviko: Kernel: a body's size counts its edges, so a sphere, cylinder or torus is its own size
- 6a06226ad jyviko: UI tests: the split face's isocurve pieces are each wider than the lines' spacing
- eb40e161d jyviko: Tests: the thread whose display is checked is made as the thread feature makes one, with exact helices
- 71ea626d0 jyviko: Tests: a quarter disc tapered outward builds, and its volume is the exact integral of its sections
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d91d3f2a6 jyviko: Kernel: a body moved by a non-rigid matrix keeps each face's source and paint on that face
- c1ead0fef jyviko: Kernel: a sweep along a smooth path names every wall, and a closed one has no caps
- 6387be309 jyviko: Tests: the high-degree line prism_curve certifies is written at the record's highest degree
- 55f48e4e5 jyviko: Tests: the sample-aliasing trap aliases by its knots, within the degree a record holds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5547cd98a jyviko: Blends: a picked edge is named as the blend takes it, the rim and not the seam
- 1cb713c96 jyviko: Kernel: an extrusion's wall seed marks only the edges nearest it
- db9cf693a jyviko: Kernel: an extrusion's cap is in its own plane however thin the extrusion
- de16a6b99 jyviko: Kernel: a half turn's caps keep their roles when its end plane is its start plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8c2fba07 jyviko: STEP import: FILE_DESCRIPTION and the preprocessor name a Y-up exporter again
- 5cc0d5e9c jyviko: Threads: a metric size without a coarse pitch suggests its fine pitches again
- e0545b2bd jyviko: Measure: an arc edge's angle is its span on the circle, not its NURBS parameter
- ae5dc2416 jyviko: Split Body: a face tool runs over its own surface's parameters
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a8753443 jyviko: Fill: the height-field fill tries grids up to 64 spans
- dc3d504ba jyviko: geom: a fill patch folds where its normal reverses between neighbours, not where it turns past the middle's
- bac6674ab jyviko: geom: patches about a fill's centre run in the spaces of their own sides, not one space of every edge's breaks
- ea6500559 jyviko: geom: patches about a fill's centre are solved by blocks, their banded interiors eliminated onto what they share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b389601b0 jyviko: Ruled surface: a strip on a cone is SMLib's revolve of its ruling, a cone face
- 1e7713d1e jyviko: Fill: a patch's edges and vertices hold its fit's gap in SMLib's tolerance model
- 4faee7dd8 jyviko: Fill: the general fill takes a loop of one or two edges in exact pieces of their curves
- c5b038548 jyviko: Fill: its tolerances follow a size that does not depend on where the body is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9095fce42 jyviko: SMLib export: a NURBS edge's interval a rounding past its knots is the NURBS's own
- b68f71a2d jyviko: Fill: a patch's edges are the body's own edges again, circles and ellipses included
- b540faaf5 jyviko: Thicken: a surface turned to its back grows the other way again
- ebb1d843a jyviko: Sweep: a parallel sweep whose path runs along the profile's plane is refused again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60f33f6fc jyviko: Feature walks: Repair Part has its fixture, its gap an input and its body renamed with the rest
- 075f307bf jyviko: UI tests: a shown dimension that breaks a later feature does it with a shell left no room
- 242bbc89f jyviko: Fillet rig: the known-failing list follows the SMLib 7e917f0 pin
- 8515dc1a3 jyviko: Blend tests: a vertical round run on up a top round's end arc (ladder 07-fillets/018) is SMLib's to end, and builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 229739a70 jyviko: Blends: a smooth edge and an unfinished tangent chain are refused saying why; SMLib's unsupported corner is named
- 0ec97c570 jyviko: Blends: tangent propagation off blends the picked edges alone; a refusal says how to change it
- 94d763c83 jyviko: Tests: a round run on through an earlier one by tangent propagation is matched by the same edges together
- a0eaceab5 jyviko: SMLib tests: a round larger than the cube is cut as if its faces went on, at its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d00ad78c jyviko: kernel: a patch builds G0 to G4, and Continuity Analysis reads each seam's middle at the order asked
- 102cde292 jyviko: Kernel rig: patched holes graded by their continuity, at clashing corners and in one sheet
- 7c9a9051d jyviko: Patch: the continuity choice's hover text says the corners stay tangent where the faces round them clash
- ef93b18ed jyviko: SMLib: pinned at 7e917f0: a corner patch tangent to its sides, an unsupported corner named, a torus from a NURBS a whole turn round its tube
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- d6b3bf27b Brett Lawson: Shell walls-touch case waits on solidcore#1442 (port fork a759622)
- 29a1ac5a6 Brett Lawson: Sweep cases name their solidcore issues (#1449 draft corners, #1450 curve-sweep placement, #1451 planar sections)
- 4f1ad5cc6 Brett Lawson: Cylinder shell case waits on solidcore#1453 (port fork fddc366 + 98ab1b0)
- c9aa5116d Brett Lawson: solidcore: move the pin to 9b76ac13 (main, with SmApiBrepMaterialCensus, solidcore#1436)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 86e4226ae Brett Lawson: solidcore backend: every UpstreamFixes flag on, and the ignored cases name their solidcore issues
- ce5de8bcf Brett Lawson: Sphere measurement cases wait on solidcore#1437 (trim_boundary_seam_wrap at the poles)
- 5140556c7 Brett Lawson: Blend refusals name their solidcore issues (#960, #1438, #1439, #430)
- 263f34850 Brett Lawson: Offset cases name their solidcore issues (#1440 face picks, #1441 ApproximateSurface, #1060, #1019, PR #1427)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 21eba6a38 Brett Lawson: claim: solidcore backend for develop
- 8c12073be Brett Lawson: Kernel: a solidcore backend behind crates/smlib, routed per operation
- 12ace4973 Brett Lawson: diagnostics.kernel: read and set which kernel answers, and see the routing table
- 976acfd76 Brett Lawson: Conversion tests: each ignored case names its solidcore issue (#1431, #1432, #1433)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9c84bdb jyviko: geom: the patch fill is tangent continuous across its own C0 knot lines, and tapers what its corners do not allow
- 2397a691c jyviko: geom: the patch fill is faired at the order it is asked for
- 0631d2d3a jyviko: kernel: a three-round corner patched G2 and G3, read off the faces at each seam
- 11af682c0 jyviko: examples: cleaning up rounds by patching their messy faces, G2 and G3
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f11c0c571 jyviko: Bodies: an operation's result is its record, not the SMLib body it was exported from
- b121d8d00 jyviko: frames tests: the moved combine tool's part is made ungrounded
- e0c7867b9 jyviko: run_strict: the box's volume to 1e-9, as SMLib integrates it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 00faac965 jyviko: kernel: a planar sheet's loop splits where it passes one vertex twice
- 5d25684a1 jyviko: sheet tests: the flat pattern as SMLib's exact 2D boolean makes it
- 52343ba23 jyviko: Robustness tests: a round's tangent chain and the lid's closed-form volume
- bc6d31e60 jyviko: GPU tests build their designs with SMLib, and the GPU jobs fetch it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ab3ba1af4 jyviko: Mesh: a ray through an edge two triangles share crosses one of them
- ccff7224c jyviko: Shell: its planar walls carry their shell roles again
- 068c6a6dc jyviko: Shell certificate tests: the saved strips are saved data, not rebuilt pieces
- b9d4ad74f jyviko: kernel: a planar region inside another's hole keeps its material
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17465a63b jyviko: Tests: the kernel-cases ladder is the reference for what the kernel builds; the seeded robustness goldens go
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 517fc01dc jyviko: Fillet rig: a regression gate on every pull request that touches fillet code
- b91ad9de2 jyviko: Splines: every degree a B-rep record holds is evaluated, so a G4 blend of degree 9 gets its pcurves
- 175b4f2ac jyviko: GPU tessellation: the shader's basis slots follow the CPU evaluator's highest degree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 39bf63b16 jyviko: Kernel rig: designed continuity cases, G0 to G4, that prove the measurement
- 52339b7ec jyviko: Kernel rig: fillet cases for the open fillet issues, each with its exact answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b859fe6 jyviko: STEP import: a whole sphere bounded by one seam has its frame on that seam
- ce71791ec jyviko: Spline surfaces: a closed spline whose outermost knots appear once is periodic
- c7373279d jyviko: Viewport: hidden edges are drawn before the visible ones, so a visible edge is never covered by a light hidden copy
- b3cb826ed jyviko: Engine: an optional check before every command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6055ce6fd jyviko: step_in tests: knot multiplicities refused per knot, then by their sum
- ae393fd9c jyviko: step_in tests: a face with too many bounds is refused by the reader's own limit
- fc3a13f17 jyviko: step_in tests: the import's repair notes for added seams and turned faces
- 4688c0f20 jyviko: STEP import: a whole round face whose seam is off its frame's quarter lines is turned onto one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d2858cb3d jyviko: STEP import: a circle edge between two vertices is the arc between them, however short
- 8b4b4a9d6 jyviko: SMLib pcurves: an end SMLib moves within the tolerance it held the edge at is mapped
- 6c355fdf7 jyviko: step_in tests: the cube fixture's edge directions clear of the assembly fixtures' ids
- efdc245d1 jyviko: step_in tests: a face the reader refuses leaves the rest of the solid as surfaces, named
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cfaf4ab55 jyviko: Kernel rig: the reason each refused sheet-metal, sweep, crash and ladder case must be refused for
- 30dc4c860 jyviko: Section hatch by part: touching cut parts never look alike
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2dd505d83 jyviko: kernel tests: rustfmt
- ee4d4b5a5 jyviko: STEP import: a round face off its frame's quarter lines is formed within one turn
- 97a31c0c0 jyviko: SMLib: the prebuilt where a union that seals a void keeps its enclosing shell first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 025344dee jyviko: A refused face is tinted as well as ringed
- 25642b6d2 jyviko: STEP import: a part's later instances in a window wait for its first, not end the window
- c1713994f jyviko: Body::unmeshed_faces counts on the coarse plan, without making the mesh
- d0081b235 jyviko: kernel: a placed copy is planned as its original, moved, as its mesh already is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 188011736 jyviko: A part the modelling kernel refuses is named, with what is wrong and what to do
- d3b8c3dc5 jyviko: Browser: Repair Part is planned under #8371
- c15c39443 jyviko: Open and import card: the step marks share one box, size and stroke
- 090fcec6c jyviko: A refused face is ringed in the error colour while the window points at it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 06fbcdfec jyviko: Fillet dialog: Setback shows its default as a length and flags one too small before OK
- baa44fc64 jyviko: Fillet dialog: a setback the field flags is not refused again under the dialog
- b7d813bd6 jyviko: Open and import card: three plain steps instead of a status line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 33acb6dc3 jyviko: Section cap by crossing count: a body touching the cut body no longer shows through
- c33bae870 jyviko: Section cap: only closed bodies take part in the crossing count
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97721ad05 jyviko: Fillet setbacks not past where the rounds meet are refused naming the least; the rig grades a refusal by its reason
- 3fd5e138c jyviko: kernel: rustfmt
- 61a1f8bf2 jyviko: STEP import: a face's NURBS form ends where its boundary does, within its tolerance
- cd4f72572 jyviko: STEP import: a surface model's closed shell beside a sheet is a solid of its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 912bccef6 jyviko: Isocurve Analysis: faces on one surface share their lines
- 29744b811 jyviko: Preview: the ghost leaves out the surface the changed body keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739153d3d jyviko: Fillet dialog: one option model, plain labels, refusals in plain words
- e4844753c jyviko: SMLib: the prebuilt with a torus or sphere keeping its NURBS form, and the concave mixed fillet corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd5319a0e jyviko: docs: the kernel's move from truck to SMLib, as written up on #4012
- 4cb0d6ee9 jyviko: STEP import: a refused solid comes in as a surface body of its exact faces
- e19785620 jyviko: STEP import: a refused solid's surface body faces as the file has it
- 529fb7cf3 jyviko: Release: macOS builds on macos-15 (GitHub retires macos-14 on 2026-11-02)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a596dd95 jyviko: STEP import: a patch side collapsed within its vertex's tolerance is a pole of the loop
- cfee4a720 jyviko: STEP import: a solid no B-rep can be made of is shown as a mesh of the faces that read
- 5bfecd8a0 jyviko: Tessellation: a loop corner on a side collapsed within its vertex's tolerance is a pole; a face no method plans is left out, named
- 0102f95dc jyviko: Tessellation tests: rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0bee8c2ed jyviko: solidcraft-smlib: Brep::edge_face_distance, SMLib's own edge/face gap
- 5d6810128 jyviko: STEP and SMLib: no edge or vertex tolerance past the 1 mm SMLib takes
- 005b1e6ea jyviko: SMLib pcurves: an edge past its face's patch gets a tolerance that covers it
- f327cdb3d jyviko: solidcraft-smlib test: an edge 2.5 um past its patch keeps its interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd34314d5 jyviko: UI: one continuity control for every continuity choice
- fab8948b3 jyviko: Clippy: assign operators and is_multiple_of in the continuity code
- 1260353f4 jyviko: Fillet Corners: the shared continuity control says what each corner builds
- bf16a76a4 jyviko: SMLib: the prebuilt with eased setbacks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f042d2073 jyviko: Isocurve test: the spline face's hole is an inner loop of one face (Refs #770)
- cb8712aa0 jyviko: Continuity: one table of orders G0-G4, and one check of what each construction builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0694fd4e8 jyviko: STEP import: an edge through a face's pole is split there
- 1d70ac267 jyviko: tess: a face whose boundary still crosses itself after untangling is filled leniently, not the whole body refused
- 77bd85cab jyviko: cli: snapshot --quality coarse|normal|fine|ultra meshes the bodies at that display quality
- 1404bc1f5 jyviko: STEP import: a spline face's edges are measured on their pcurves only, not by nearest point first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e2c0c0a20 jyviko: pcurve: the lift check samples its interval's end exactly
- 293d19f65 jyviko: STEP import: a vertex's tolerance covers its edges', and edge samples end exactly
- 19c4a1502 jyviko: SMLib pcurves: an end SMLib sets within the edge's tolerance is mapped onto our interval
- fc08b5f99 jyviko: bspline: a parameter a rounding past the domain's end is that end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfcdefa92 jyviko: STEP import: a loop jumps at a pole to within the tolerance, as its pcurves closed it
- 7ba82d729 jyviko: STEP import: spindle and horn tori, and a negative major radius
- 3a7b51f72 jyviko: STEP import: an edge's distance from an analytic face is measured before its closed-form pcurve
- fcb162448 jyviko: brep: the geometry check reads a pcurve at its edge's parameter within the interval's rounding
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 07cb8c7cc jyviko: STEP import: an edge off its face's surface carries its gap as its tolerance
- 21c64fb24 jyviko: tess: an edge loop of fewer than three segments is split until it encloses an area
- 9da3174bb jyviko: solidcraft-smlib: a revolution goes to SMLib as its NURBS form alone
- 31b9410f5 jyviko: solidcraft-smlib: a horn torus to rounding is no ring torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 05f1c6b9a jyviko: Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
- 87e7fe472 jyviko: Tapped holes: a preference keeps metric's major-less-pitch drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9717fab2f jyviko: Tapped holes: Rc and NPT, and a modelled thread with the thread's End
- 72e0e0094 jyviko: Ladder 06/017: the golden entry from a run of the case
- 376a91ad7 jyviko: Hole presets: a modelled tapped thread and its End, and every catalogued size
- b6c3b32a9 jyviko: Tapped holes: an Rc or NPT hole takes the stocked drill under its standard minor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 361b35afe jyviko: Thread: a shoulder thinner than the overrun's reach is still a shoulder
- 5fe141c0f jyviko: Thread: the start never fades; ease_in is gone
- 386598282 jyviko: Thread dialog: the Ends section is Start (None, Chamfer) and End (Square, Fade)
- 80e47130b jyviko: Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c4212c04 jyviko: Thread: the chamfered tip at the start or at both ends
- 75deb73aa jyviko: Thread: ISO 228-1, ISO 7-1 and NPT pipe threads, taper threads by a radial law
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4f6f254d0 jyviko: smlib: a setback left open is a profiler span like every other SMLib call
- 676919d4d jyviko: tess: a face no method plans is filled leniently in (u, v), and named in the stats
- 1acbe2806 jyviko: Fillet dialog: plain words for continuity, Corners with Setback out of Advanced
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b2fc5e1fb jyviko: smlib, kernel: a refused setback corner is named by its point and why
- 855575473 jyviko: SMLib: the prebuilt with setback-open corners and the refused-corner index
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d8282b336 jyviko: doc, engine: corner: g2 sets each corner back for its G2 patch
- 8fbb575a5 jyviko: kernel-cases: a continuity check, and ladder 07/015 graded by it
- 808913777 jyviko: kernel: G2 corners at concave corners, mixed ones refused
- ba38fbd2a jyviko: kernel-cases: ladder 07/019, a concave corner's G2 patch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6263db8d6 jyviko: smlib: Brep::blend_setback_open, set-back corners left open with their holes
- d63a50c47 jyviko: kernel: seam diagnostics give every station's values
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- faffa6664 jyviko: Profiler: the diagnostics.profile test holds while other tests record
- 7fde0bdff jyviko: Profiler: docs/perf.md says how to switch it on and read it
- 29225d2c8 jyviko: geom: fill_matched, a height field G1/G2 to the faces beside its loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 10ea00e74 jyviko: Profiler: every SMLib C API call is a span, timed by the C API itself
- 319c0bc9f jyviko: Profiler: kernel operations and STEP/IGES import stages are spans
- 9cd655259 jyviko: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile
- fafd977b0 jyviko: Profiler: the Profile operations preference switches recording at run time
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6645e2c6 jyviko: Threads: a modelled thread's tangent flank joins are not drawn
- 970c29745 jyviko: Smooth edges: a measured crease is kept apart from a tangent display join
- 541b94a60 jyviko: Smooth edges: hide only joins inside one smooth surface (G2); draw tangent joins
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57d48aa9f jyviko: Clippy: the kernel's and engine's warnings on develop
- b52a01e29 jyviko: Attribution: the hand-written box STL of kernel case 4561
- 15caa50d2 jyviko: CI affected crates: no truck crates are vendored any more
- c95580d04 jyviko: Smooth edges: one G1 rule on exact surfaces and pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d13300b0a jyviko: cargo fmt: the format-40 change and the rebase's export list
- 873124c49 jyviko: CI: develop runs like main; SMLib is fetched after the Rust cache is restored
- 6517d1ee6 jyviko: Arabic and Hebrew catalogs: #4414's thread direction labels out, as in every other catalog
- fddb57c0d jyviko: Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e26dc640 jyviko: The command line and the web app link SMLib by default too
- 826f36a79 jyviko: CI and releases fetch SMLib before building
- 8aea8e5a8 jyviko: Format 40: a thread's hand on tapped holes too; v0.24.0's handedness opens as hand
- 652d3a2cb jyviko: ui: main's browser picks (#4774) read the placed model through session_world
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a57ce13e7 jyviko: thread: a shaft thicker than a modelled thread is refused, never turned down
- 6b9f5e0e4 jyviko: thread: main's screw direction (#4414) out; the thread's hand is the one direction
- 5fc160732 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3e9c70e26 jyviko: Cargo.lock: resolved for the merged manifests
- 6e15b9676 jyviko: engine, kernel-cases: tangent joins out of the corner-pick count; 3383 and 5024 recipes to main's rules
- 46294c7c2 jyviko: kernel: STEP placements by a transformation operator keep its axes and scales
- 3d0f6aa3f jyviko: kernel: IGES trim pieces closed onto their meeting points in main's assembly reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b310512e9 jyviko: kernel-ladder: tier 11 threaded parts grade their geometry
- f6b42d416 jyviko: kernel-ladder: 07/016 is a refusal; 07/018 the same corner with r2; cases.py makes 013
- fb384be9c jyviko: smlib: build against SMLib a15b5a2 (replay of usd-brep 1.0.1 with the fork's fixes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3f771998 jyviko: kernel-ladder: tier 07 corner cases grade their geometry
- 0d7acb0ce jyviko: kernel-ladder: 08/007 grades the rounds run into the chamfer
- c9dcc42a1 jyviko: kernel-ladder: tier 09 shells grade their geometry
- 05e0dc17b jyviko: kernel-ladder: 10/008 grades the vents as four times one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 191b2f4c4 jyviko: kernel-ladder: cases.py makes every committed case again
- 977230b7c jyviko: kernel-ladder: tier 04 cases grade their geometry
- 84473f61f jyviko: kernel-ladder: tier 06 grades the threaded boss; both hands and Tr40x14(P7) added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8edf5b873 jyviko: kernel-cases: the ladder's golden recorded after the thread rework
- 2e1c1097a jyviko: geom: a degenerate point's normal steps into the parameter interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3287bcba9 jyviko: Threads with several starts
- 7bfc184e8 jyviko: A modelled thread's chamfered tip (ISO 4753)
- d433ce2c9 jyviko: Thread runouts: the groove fades out instead of stopping square
- fdede5a0a jyviko: Thread work in rustfmt's layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 610173e1f jyviko: combine: move each tool into its target's frame
- 3fb263d00 jyviko: hole: keep a countersink's tool within its rim above the face
- 1171c4c2a jyviko: A sheet metal body mirrored or patterned into new bodies is sheet metal (#3353)
- 5a9bf4742 jyviko: A converted sheet takes its rule's values at its own thickness (#4328)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 48abbbcc1 jyviko: kernel: a vertex a face's loops pass twice is one point of its (u, v)
- 1df330c79 jyviko: engine: a shell that opens no face makes a closed hollow body
- 5aeff43f8 jyviko: smlib: a horn or spindle torus face comes out as its NURBS form
- bd4e1926a jyviko: kernel-cases: 2928's base extrudes the ring it describes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 903e371fa jyviko: geom: a face's box reaches its boundary's extremes, not its samples'
- cfe1b8b92 jyviko: step: a loop through its surface's pole has its seam
- 0bea4631b jyviko: kernel: IGES trim pieces that miss their meeting point are closed onto it
- 0e6681a2d jyviko: kernel: the largest fitting fillet shrinks only on a refusal as too large
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 237f0ae74 jyviko: kernel, kernel-cases: a convex blend overflowing a cliff is built, with its analytic answer
- 7d300984b jyviko: kernel, kernel-cases: a shell whose walls would meet is refused, saying so
- 3be6ad433 jyviko: kernel: a tangent chain stops where the edges' convexity flips
- 098fac037 jyviko: geom: a face's loops lie in one turn of its periodic surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 773e627b4 jyviko: tess: no edge segment spans more than a quarter turn; loops touching at a vertex close
- 806268714 jyviko: tess: a face's sampled boundary never crosses itself
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 42e50a87c jyviko: smooth edges: tangent joins of planes, cylinders and cones, along straight splines too
- 89e23d1eb jyviko: record: a body built from a sketch has new edges, with no origins
- 8eb93ff06 jyviko: step_in tests: the cube fixture's edges lie on their lines
- 4b418c0d2 jyviko: kernel: how a body's material regions meet, read from the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667ee5665 jyviko: kernel tests: a blend meant to run along a tangent chain asks for it
- 74d02d2a0 jyviko: smlib: the fork with NVIDIA usd-brep 1.0.1 merged (f7f012b)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 306c7b75b jyviko: pcurve: a rim at a steady pace on a spline face, read from the edge itself
- 28e0eea80 jyviko: pcurve: each use's closed form or none, and a kernel's trims for the rest
- 1bf206259 jyviko: STEP and IGES import: SMLib makes the pcurves that have no closed form
- 879958721 jyviko: pcurves: a flat patch's are a plane's; SMLib's sheet loops read either way round
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2883981a0 jyviko: brep: meridians, revolutions and whole turns exact on their forms
- 6c385c843 jyviko: sew, step: face forms from the boundary's extent; trimmed profiles exact
- fd71e6a95 jyviko: kernel: assembled faces and edges on their NURBS forms
- f6f8b28c0 jyviko: Records require NURBS forms on circles, ellipses and curved analytic faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd873bb83 jyviko: sew: an edge folded across a bend gets a Hermite pcurve on the bend's form
- c376e8403 jyviko: step: imported faces and edges on their NURBS forms
- 69702833f jyviko: solidcraft-smlib: ellipse edges on their NURBS form, as circles are (fork 0c5868e)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c5dbf879a jyviko: brep: exact pcurves of forms: cut on planes, along the parameters of spline faces
- a4180ab42 jyviko: sew: faces and edges on their NURBS forms, their pcurves exact
- 57080f88c jyviko: fixup! sew: faces and edges on their NURBS forms, their pcurves exact
- 76a254137 jyviko: sew: a circle on a revolved face is labelled on that face's frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f070eee2b jyviko: brep, kernel: a face's side is read on its NURBS form (#4149)
- 58f60adbf jyviko: kernel: an assembled face keeps its NURBS form
- 807010c49 jyviko: brep: the NURBS forms of lines, circles, ellipses, cylinders, cones, spheres and tori
- f370d1e42 jyviko: brep: forms on their frame's quarter grid, across the seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6892ceac7 jyviko: brep, kernel: code that reads an edge's angles takes them from the circle, code that evaluates takes the NURBS form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b1326e48d jyviko: brep: an edge on a line, circle or ellipse carries the NURBS form SMLib holds it as
- 6adba90e2 jyviko: solidcraft-smlib: circle edges on their NURBS form, SMLib's trims kept on them (fork deec9cb)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e6f993fff jyviko: Revert "kernel: merged topology counts no seam edge (a face on both sides of it)"
- 4ea29e307 jyviko: kernel-cases: 818 counts its two cylinders' seams, as every case counts edges
- de0e5bf52 jyviko: kernel: a tangent chain stops at a smooth edge
- 369c897d8 jyviko: kernel, cli: clippy and the cli tests build again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 84bd2daad jyviko: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default
- d0ff1dcfa jyviko: doc: an extrude's taper without a corner rule picks one per profile
- 5e7aba8df jyviko: loft sections matched to their neighbours
- 2752eee61 jyviko: kernel: merged topology counts no seam edge (a face on both sides of it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b6a3b31ff jyviko: brep: a face on a cylinder, cone, sphere or torus carries the NURBS form SMLib holds it as
- 2e26e0567 jyviko: solidcraft-smlib: the export reads FACE_NURBS_FORM
- 03db54a23 jyviko: solidcraft-smlib: SMLib at the merged fixes: slice, seam check, analytic revolve, draft corners, blend refusal, union of many, NURBS forms (fork 03c14ca)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bcbb99005 jyviko: kernel, smlib: a blend larger than its faces is SMLib's refusal; blends take exactly the given edges
- 13e49e069 jyviko: engine: solid.fillet and solid.chamfer say they blend exactly the edges given
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ffbbc74d jyviko: step: a cone within the file's uncertainty of its limit plane over the face is read as that plane
- 0185ccc1e jyviko: solidcraft-smlib: Brep::union_all, the union of many bodies in one SMLib call
- 0213c3dfa jyviko: kernel: union_all, one SMLib union of many bodies checked once, history over every operand
- 83d965f30 jyviko: doc: a join into one target and an intersection's tools are one union_all call
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 045961445 jyviko: doc: an extrude's taper saves how it closes the profile's corners
- 1b5ca02b8 jyviko: solidcraft-smlib: SMLib's tangent draft corner meets lines at an edge (fork ccc56fd and docs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 09c979a4b jyviko: brep: a full circle in a profile is one closed arc
- 8e6c24aeb jyviko: kernel: a raised band reads its arcs' circles from the record
- d10041743 jyviko: kernel: emboss reads a wall's span from its arc's interval
- 0414f5a7a jyviko: kernel: assemble's unused CurveEval import goes with edge_point
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 99024b368 jyviko: solidcraft-smlib: SMLib at the candidate: solver statuses, range-end refinement, arc sweeps as cylinders (fork 1c8e415)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44744d3aa jyviko: kernel: a face's boundary runs along a pole as its pcurves say
- 01845c189 jyviko: kernel: planar sheets are built one simple loop at a time
- 529c2cf04 jyviko: solidcraft-smlib: SMLib's area counts the faces between solid and void only (fork 8400690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 78937d1db jyviko: brep: one basis-derivative routine, bspline::basis_derivatives
- afce22bb6 jyviko: solidcraft-smlib: mass properties of any body, by its material regions (fork 311946c)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 81cef1c60 jyviko: kernel: a free ruled strip is the exact ruled surface to a far curve of its own
- 9e2c1c57c jyviko: kernel: ruled surface docs and test for the free strip's far curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2a09b9943 jyviko: kernel: the test target compiles: the last tests on the record and SMLib
- 2f83aaa5d jyviko: kernel: clippy's own fixes across the kernel (needless borrows, assign ops, contains)
- f6afec8ea jyviko: kernel: dead code left by the port deleted; clippy -D warnings clean on all targets
- a0e17daa5 jyviko: kernel: cargo fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1b7fda4d3 jyviko: kernel: surfaces and SMLib blends without the smlib feature gate
- e1b9ea10c jyviko: kernel: placement, history, mesh-memo, display and issue tests read the record
- 8237cc927 jyviko: kernel: mesh, lump, loft-rail, untouched-face and intersection-curve tests read the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7646e8ff6 jyviko: kernel: compiles on the record — trim reads the tool's side near its body; mesh memo typed
- 748e796b2 jyviko: kernel: sweep histories attach with no edge origins given
- a5f5809ba jyviko: kernel: a ruled strip's side builder needs no mutable binding
- ee79235f5 jyviko: kernel: surfaces, bridge and loft rails clippy-clean; picked_loop gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9eb68e4 jyviko: solidcraft-step: a record's layout (solids, voids, sheets) and outer loops for every writer
- ed43871f7 jyviko: kernel: IGES export from the record
- 1d4811201 jyviko: kernel: STEP import tests and docs without the deleted face splitting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30ddda306 jyviko: solidcraft-step: write a schema 4 record as ISO 10303-42 topology
- d59bb0084 jyviko: solidcraft-step: revolutions under axis-keeping placements; void shells as the record has them; Reader::frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a8ca6d0f jyviko: kernel: Assembly::finish ends in Brep::canonical
- bd1095fff jyviko: kernel: the general fill's tests read the record; five- and six-sided fills are patches about a centre
- 5aaf405d8 jyviko: kernel: the second-derivative tests check the record's SurfaceEval::second
- 4897ce17b jyviko: kernel: loft rails tests measure against the record's surfaces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 849bb1f24 jyviko: kernel: face sections along a direction as SMLib's exact curves
- 876333480 jyviko: doc: an iso link along a direction on a solid is SMLib's exact section
- d9274aaf1 jyviko: kernel: the point-path sweep test expects the polyline's walls
- 13e9aca7e jyviko: kernel: exact projection, section and iso curves exported; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7b5d732e3 jyviko: kernel: project_onto_face, sketch curves projected onto a face as SMLib's curves
- 0ef5b910f jyviko: doc: a curve projected onto a solid's face is SMLib's projection of the curve
- 95e9a80fa jyviko: kernel: iso_curves, a face's isoparametric curve exactly, trimmed by its loops
- 814475f4f jyviko: doc: an iso curve of a solid's face along u or v is the surface's own curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6d0993817 jyviko: kernel: a ruled strip whose rulings turn along a free-form edge is refused, not fitted
- a6b41dd82 jyviko: solidcraft-smlib: Brep::project_curves, curves projected onto a face as SMLib's B-splines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1708fe0e0 jyviko: brep: Brep::canonical, any record in canonical order
- 98548fe16 jyviko: kernel: one canonicaliser; one tensor sheet
- f8e175273 jyviko: brep: Brep::split_edges, a record's edges split exactly at parameters inside them
- 65e141ac4 jyviko: kernel: stitch splits an edge at another sheet's vertex lying on it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30b02cdfa jyviko: kernel: the solid loft's rails anchored by loft_rails::railed; path curves shared
- 0d611ed84 jyviko: kernel: surface sweeps mitre at corners, as the solid sweep does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c7afe5eb4 jyviko: doc: a lip is SMLib's raised band and a groove its exact rim band, nothing else
- 89423b88e jyviko: doc: a sheet bore is cut once, with the drill clipped to its panel
- f4fa8a407 jyviko: kernel: the touching-face checks, extrusion batching and clearance probe are gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7c0d9b5e8 jyviko: kernel: the general fill on loops of five or more edges, its patches about a centre
- 87907628e jyviko: kernel: surface match on the record, through bridge's record API
- 22fde06a3 jyviko: kernel: loft blend on the record, through bridge's record API
- 7e7193b33 jyviko: doc: the faceted thread groove is gone; the groove is SMLib's exact screw sweep
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- beebf2203 jyviko: kernel-cases: --dumps=DIR leaves each failing SMLib call's inputs for replay
- 83c0f4e2c jyviko: AGENTS.md: SMLib is the kernel; no switch, no other kernel
- 1b27c134d jyviko: kernel: an intersection curve is where SMLib's imprint cuts, exactly
- 9398b2586 jyviko: kernel: intersection edges exported from the crate root
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e00645ca5 jyviko: kernel: crate root follows the split, surfaces and SSI ports
- 252b2947a jyviko: kernel: mesh bodies built by Body::of_mesh; fuzz booleans have no fallback counts
- 0013249c4 jyviko: kernel: Patch of a body's edges is fill's patch with no crown
- 08f061b02 jyviko: kernel: boundary surfaces on the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9b5e0a8b4 jyviko: kernel: T-spline sheets as record faces; NURBS faces on the record
- 5c1b335e1 jyviko: kernel: bridges read their support faces on the record
- b5a7d52b7 jyviko: kernel: bridges and surfaces read the body's own record
- c83bd8f94 jyviko: kernel: T-spline and offset tests read the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6fb1af00 jyviko: kernel: an arc's knots built without a borrowed temporary
- d3ca6e089 jyviko: kernel: loft rails on exact NURBS sections, the last section met where the rail ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0cbd9e19d jyviko: kernel: profile segments as exact schema 4 edge curves and pcurves
- e1326f37f jyviko: solidcraft-smlib: Brep::stitch and Brep::offset_sheet, and the fork pinned at e3d478d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 585334a29 jyviko: kernel: planar source lineage on the record, coplanar faces joined by SMLib
- 5c16e8dd1 jyviko: kernel: coplanar faces joined by SMLib's merge_faces, the record read from the body
- c802458ef jyviko: solidcraft-smlib: Brep::face_points, a point inside each face (smlib_face_points)
- 453a4dec7 jyviko: kernel: a trimmed piece's side is read at a point inside it, exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e520c9d42 jyviko: kernel: a body's record may be a surface body of open shells
- befcfecb7 jyviko: solidcraft-smlib: Brep::split_faces and Brep::split_body on the fork's split shims
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5d783066 jyviko: kernel: outline_union deleted, a retry of the old boolean with no caller left
- 25b128698 jyviko: kernel: crate root follows the query-module port; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- abf46cc21 jyviko: kernel: clearance reads each face's surface from the schema 4 record
- f53405d6b jyviko: kernel: plane_fit fits and certifies planes on the schema 4 record
- bd956b88a jyviko: kernel: spline_conv makes record curves, surfaces and tensor sheets
- abb7c37d8 jyviko: kernel: face_params deleted; a face's boundary in its parameters is the record's pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e463eabb6 jyviko: kernel: topo reads each face's surface from the schema 4 record
- 80e34cc8c jyviko: kernel: surface_kind reads faces and edges off the schema 4 record
- b0ad6f62b jyviko: kernel: body distance projects onto the schema 4 record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3ef93b363 jyviko: kernel: the general fill is the iso-parametric patch on three or four edges
- cfb5dc3ba jyviko: solidcraft-smlib: Brep::planar_faces and Brep::boolean2d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fa086dd5 jyviko: kernel: record.rs records history on the schema 4 record, by index
- c5c411de5 jyviko: kernel: an assembled record is the body; its history through record::attach
- 796d3e7d2 jyviko: kernel: boolean_record composes histories; healing is heal's
- f56a94eac jyviko: kernel: exact path helpers exported; SMLib pinned at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 166bfbacd jyviko: brep: records of bodies apart from each other join into one; islands stay inside their voids
- 065e61ec7 jyviko: kernel: Body is its schema 4 record, with its SMLib body made once
- 22734a55f jyviko: kernel: trim on the record: split, side by the tool's field, pieces removed
- 7bbdd3713 jyviko: kernel: untrim on SMLib (smlib_untrim_face), its history from SMLib's tags
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1d289dfd6 jyviko: kernel: fairing works on record curves and surfaces; fair_faces rebuilds through SMLib
- f9f59d826 jyviko: brep: SurfaceEval::second, a record surface's exact second partial derivatives
- 748d9f25e jyviko: brep: CurveEval::derivs, a record curve's point and first derivative
- e01018839 jyviko: kernel: seam continuity measures the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9f71e93e2 jyviko: kernel: Delete Face with healing on the schema 4 record
- 3bd1cc534 jyviko: solidcraft-smlib: Brep::merge_faces, SMLib's removal of topological edges and vertices
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cbf28a4fd jyviko: kernel: the prism boolean modules are gone from the crate root
- 9268a1e88 jyviko: solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b11433bc5 jyviko: kernel: smooth display edges classified on the schema 4 record
- 3ca3638c5 jyviko: kernel: the curve, loop and vertex blend modules are gone from the crate root
- b0cc84b28 jyviko: brep: a record moved rigidly, exactly
- fa3d914af jyviko: kernel: SMLib measures mass properties at its documented 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6e17d26dd jyviko: brep: a spline's closedness is worked out once, not on every evaluation
- 51d7fc413 jyviko: kernel: IGES trimmed surfaces close their loops and split into separate bodies
- f71cb3d99 jyviko: engine: revolve about a construction axis given by name
- 85da7d6c2 jyviko: engine: count a face pick's work as it is done
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d61efb306 jyviko: kernel: a face's boundary takes its (u, v) from the record's exact pcurves
- 4b8edef06 jyviko: kernel: the tessellator's tests plan the body's schema 4 record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667cd3356 jyviko: solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
- e57f2f2a5 jyviko: brep: a face's points search one grid of its surface, made once
- 1bc0df6d0 jyviko: doc: a join of many tools into one target unions them in a balanced tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69a7a85cb jyviko: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cac7d6eff jyviko: kernel-cases: the hollow ball of case 450 has two shells
- faae48d6e jyviko: solidcraft-smlib: Brep::loft_to_point, and the fork pinned at 0294982
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 520d934fe jyviko: kernel: SMLib sweeps that twist, scale or follow rails, railed lofts, and paths of points
- f870ecb87 jyviko: solidcraft-smlib: pin the fork at ffaf4e8, offset merge and intersection-edge ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e1a257169 jyviko: kernel-cases: SOLIDCRAFT_KERNEL=truck grades as the default kernel
- 1336352a4 jyviko: solidcraft-smlib: pin the fork at 2d7c7ed, the second round of SMLib C++ fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a630daee jyviko: tess: a hole in a closed face lies in its outer loop's period
- 693cba4e2 jyviko: kernel: a curved strip straight across and narrower than a side is its boundary nodes alone
- 20d4b1f4e jyviko: kernel: a spline wall winding round an axis sends its body to the display plan for meshing
- 5ed1e95a4 jyviko: kernel: a cut grid past the grid cap thins its lines instead of giving the face to Delaunay
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69ad1ae45 jyviko: solidcraft-smlib: the curve list carries nothing in a build without SMLib
- 1a5e60349 jyviko: brep: a point's parameters on a spline winding several turns are found on its own turn
- e1c631dd3 jyviko: brep: a pcurve keeps its tangent where its curve is smooth through a full knot
- 829d161f6 jyviko: brep: the projection runs Newton from up to 32 starts, nearest first, until one lands
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02bfd6e10 bherbruck: kernel: draft through SMLib
- d20e91f8c jyviko: doc: re-anchor a stored face pick strictly inside its named face
- 36b7aa267 jyviko: solidcraft-smlib: a build without SMLib keeps the sweeps' curve lists without a dead-code error
- d22e89bcc jyviko: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 714475b84 bherbruck: kernel: measure through SMLib's exact mass properties, checked against the mesh
- 07c36cfd0 bherbruck: solidcraft-smlib: Brep::chamfer_sides, and Error::Unsupported for a radius law with a corner
- ae1d746ae bherbruck: kernel: chamfers with two setbacks through SMLib
- a043e4ae2 bherbruck: kernel: an SMLib blend's corner patch comes from the edges meeting there
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8fde178fe Brennen Herbruck: kernel: any schema 4 record into SMLib with its order, healed where refused
- 5014c4f17 Brennen Herbruck: kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies
- 8ad09ec64 bherbruck: smlib export: a face's loop crosses its poles where the face's parameter box says
- f4da25243 bherbruck: solidcraft-smlib: the fork at bf7c272, whose operation results hold their own gaps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 96bdbbf3b bherbruck: docs: SMLib vs truck triage of the sweeps, threads and shell cases
- 82fe0e59e Brennen Herbruck: solidcraft-smlib: Brep::imprint
- 7e208529c Brennen Herbruck: solidcraft-step: each record face names its face in the file
- 863afb5e3 Brennen Herbruck: solidcraft-smlib: an arc past a full turn goes to SMLib a turn back
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- baae4ee19 jyviko: kernel: fillets and chamfers through SMLib when SOLIDCRAFT_KERNEL=smlib
- f73d40383 jyviko: kernel: an SMLib blend pick at a seam's end takes the sharp edge there
- 1d8299aed jyviko: kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 29d307bdc jyviko: doc: a modelled thread through SMLib cuts the exact groove
- 5dd3acdec Brennen Herbruck: kernel-cases: on the kernel branch a thread off its hole or shaft size is refused
- b900d6d46 jyviko: kernel: solids an SMLib boolean leaves touching come back as separate solids
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0f3d6f177 jyviko: kernel: shell, offset faces and thicken through SMLib, with SMLib's history
- 82865e283 jyviko: kernel: a body SMLib walks some loops of the other way keeps its order
- 6bfbe1041 jyviko: kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d672cfa01 jyviko: kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation
- f35f06d98 jyviko: kernel: a revolution that is no analytic surface goes into SMLib as its B-spline
- a6ca4e0dd jyviko: AGENTS.md: one switch, SOLIDCRAFT_KERNEL, in place of the booleans-only note
- 51211ad1f jyviko: solidcraft-smlib: offset faces, thicken, and NoRoom for walls with no room
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e35b4d744 jyviko: kernel: revolutions of a line square to the axis go into SMLib as planes
- 00e43aacc jyviko: kernel: an operand SMLib's check refuses goes through SMLib's healer
- 94c159825 jyviko: kernel: SMLib's round faces decode as truck's own revolutions are laid out
- ff0f7ccfa jyviko: kernel: a body's record for SMLib takes a larger tolerance where an edge needs it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b27751d43 jyviko: kernel: planes go into SMLib as its planes; analytic angles start at zero
- 640d3d9ea jyviko: kernel: truck's extruded circles go into SMLib as its cylinders
- 1980f9743 jyviko: kernel: SMLib's export keeps every face of a void's shell
- c344801cc jyviko: kernel: note that the engine's and CLI's `smlib` features reach SOLIDCRAFT_BOOLEANS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5238840bc jyviko: kernel: booleans through SMLib behind SOLIDCRAFT_BOOLEANS, with SMLib's history
- d271add1a jyviko: kernel: revolutions go into SMLib as its cylinders, cones, spheres and tori
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c992630e1 bherbruck: ATTRIBUTION.md: rows for the kernel rig's STEP import fixtures
- b90a5851c jyviko: kernel: open a half sphere's loop at its pole, so its seam closes
- 54542890d jyviko: kernel: hold every display-plan triangle to the chord tolerance
- f7336497f jyviko: AGENTS.md: the kernel does geometry, sugar lives above it
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 201ca9a81 Brennen Herbruck: smlib tests: score SMLib's GlobalSurfaceIntersect on the SSI corpus
- f8b48d0e4 Brennen Herbruck: smlib: pin the fork at 70e1bf5 (capi: surface/surface intersection)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17eafa2d4 Brennen Herbruck: solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
- 1edeb2a6f Brennen Herbruck: tests: SSI corpus fixtures (119 cases with exact truth)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 58ce14f45 bherbruck: kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
- e809edd33 Brennen Herbruck: kernel-cases: thread cases that are slow by nature get 600 s
- 8cb976b9b bherbruck: kernel-cases: watertight checks the display mesh, welding vertices by distance
- 3feb9ba2c Brennen Herbruck: kernel-cases: tessellation cases from mesh-hole reports grade watertightness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 35ebc816b jyviko: kernel-cases: a missing capability's message is the case's own text
- 248fee75b jyviko: ladder: every ladder run measures one case at a time
- e1575385b Brennen Herbruck: kernel-cases: a thread off its hole or shaft size is refused
- d7381a1fa bherbruck: kernel-cases: threads fit a hole or shaft off the thread's size again
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75aa8acb6 Brennen Herbruck: kernel-cases: sweeps skipped sources (72)
- 678a70da2 bherbruck: kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- c24b066d2 bherbruck: kernel-cases: an outcome for geometry with no single manifold answer
- 8764a76ff Brennen Herbruck: kernel-cases: threads cases from #1995 and #3368 (finely faceted booleans), skipped #987#3130#3824
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a9002968f Brennen Herbruck: kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e71db662 Brennen Herbruck: kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739524a17 Brennen Herbruck: kernel-cases: sweeps lofts from #271-#3412 (zig-zag pairing, ring sections, flush joins and cuts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce201eea1 jyviko: kernel: SMLib spheres cut by a boolean decode oriented and meshed
- 62142ef38 jyviko: brep: a revolution of a closed profile is periodic along it
- 62124a711 jyviko: kernel: spline edges on part of their curve load as that piece
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a7c0109ea Brennen Herbruck: kernel: boolean runner grades the seeds against a reference volume
- 7bb74d1c6 bherbruck: kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ac6ddbdbe jyviko: kernel: boolean runner times both kernels and runs the cut sequence
- 79ae117dd jyviko: kernel: boolean runner measures SMLib's results again on truck
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 27e996c44 jyviko: brep: splines closed on themselves are periodic for pcurves and tessellation
- 204b650d9 jyviko: brep: check_geometry refuses loops that enclose no area or turn the wrong way
- 19cf3d94a jyviko: brep: orientation, not position, tells a face's outer loop
- 2196129f1 jyviko: kernel: side-by-side boolean runner calls SMLib's boolean
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5b8d89abd Brennen Herbruck: kernel: schema 4 STEP records of revolved and conic-bounded parts against closed-form volumes
- c35fd77f6 jyviko: solidcraft-smlib: rebuild SMLib when its own sources change
- 734883bdb jyviko: solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d41ae8512 Brennen Herbruck: solidcraft-step: surfaces of revolution and extrusion, offset surfaces, hyperbola and parabola edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0bad4161 bherbruck: solidcraft-smlib: check test on every primitive
- 7050e9cfc bherbruck: solidcraft-smlib: mass properties of every primitive against closed forms
- 4983b8872 Brennen Herbruck: kernel: the boolean runner builds every SMLib operand
- acff340a0 Brennen Herbruck: solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 161832976 jyviko: AGENTS.md: unsafe in the SMLib FFI module and its child modules
- 25d2056a2 jyviko: brep: a seam from pole to pole gets pcurves a period apart
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b85b51e81 Brennen Herbruck: solidcraft-smlib: blend faces come from the edge they replace
- 4a6494b48 jyviko: brep: check_geometry, the geometric agreement of a record
- 570028f31 jyviko: brep: the truck adapter checks a record's geometry before decoding it
- 30f5e617c jyviko: brep: document check_geometry in the validation section
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd80377dd Brennen Herbruck: solidcraft-smlib: face and edge history out of SMLib operations
- 4a4e11ef7 Brennen Herbruck: kernel: a side-by-side runner for truck and SMLib booleans
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60aa5e697 jyviko: solidcraft-smlib: build every C API source file
- 3c0b53935 jyviko: solidcraft-smlib: read SMLib's log lines inside the FFI module
- 858f2c3bd jyviko: solidcraft-smlib: the C types are imported only when SMLib is built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 692fba51a jyviko: naming: say how to re-record the corpus names
- a8c8f8832 jyviko: naming: list removed lines before added ones in the corpus diff
- 1d4916008 jyviko: brep: a surface point's parameters move to geom
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 099026d94 jyviko: kernel: fitted pcurves on curved surfaces, unwrapped and closed per wire
- c7088fac9 jyviko: kernel: pcurve tests for seams, poles and loop orientation, and pictures
- 0d026e975 jyviko: kernel: pcurve fits start from four samples per span
- 4afbe3b90 jyviko: kernel: pcurve test for a face round its surface without a seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7024ceec8 jyviko: CI: no runs for pull requests into kernel-smlib for now
- 92d433ca9 jyviko: AGENTS.md: the kernel-smlib branch's rules (ADR 0002)
- ee5deffaa jyviko: brep: Curve2 pcurve type and the truck pcurve entry point
- 26ab8981d jyviko: kernel: exact pcurves of lines and splines on planes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-20 22:53:02 -04:00
4228 changed files with 386410 additions and 108040 deletions
<!-- Title: which part of the app changes and what a user now sees or can do, clear to someone who hasn't seen your chat, the issue or the code. -->
## Change
Describe the problem and resulting behavior. Link the issue when applicable.
Start with what this is, in plain words someone new to the project would understand: what it does and who it's for. Don't assume anyone knows the name of your tool, project or feature. Then describe the problem and resulting behavior. Link the issue when applicable.
Changes a default: no
@@ -14,6 +16,8 @@ What did you run, and what were the results? Include expected and measured value
## Screenshots of the behavior (when observable)
Put the picture or video here in the description. A file in the diff doesn't count: a maintainer has to be able to see what this is without opening the changed files.
For observable CAD, UI or model behavior, include actual descriptive screenshots or a short recording from a small reproduction. This includes kernel, geometry, assembly and backend effects that can be shown in the app. Coding agents should run the app and capture the evidence themselves, rather than asking a human for evidence they can produce. Show the actual failure/result, preferably before and after, with brief steps, expected/actual behavior and annotations where helpful.
Flowcharts and Mermaid diagrams cannot substitute for evidence of visible behavior. Use diagrams for architectural reasoning when actual screenshots cannot illustrate the point. Changes with no useful observable behavior may omit screenshot/video evidence. Exclude private designs and sensitive details; attach media or link to an accessible recording rather than committing generated review artifacts.
# `ci` job still runs and reports the commit's real result (see the `ci` job): the merge queue
# reads `ci` from the newest run of a commit, so a run without it would block a PR that passed.
# Cross-compilation is opt-in through Run workflow; release builds remain in release.yml.
# The release gate (release-gate.yml) calls this workflow (workflow_call) as a Run workflow with
# cross-compilation on.
# Every Linux job runs on Blacksmith's Ubuntu 24.04 runners (blacksmith-<N>vcpu-ubuntu-2404), sized
# per job: 32 vCPU for the tests, 16 for Clippy, the GPU path tests, the archive build (nightly) and the merge queue's, 8 for compiles, doc and reference tests, 4 for the light checks, 2 for Select checks and ci.
# The Windows shader job runs on Blacksmith's Windows Server 2025 runners (blacksmith-8vcpu-windows-2025);
@@ -50,10 +52,14 @@ on:
# only (other labels are skipped, see the top of this file).
# Pull requests test the affected packages (scripts/ci/affected.py).
scope=(--workspace)
if [ "$FULL" != true ]; then scope=(); for p in $PACKAGES; do scope+=(-p "$p"); done; fi
status=0
# The GPU path tracer's tests run in their own job (GPU path tests): one at a time, they
# took about 36 of this job's 45 minutes.
# A failed test does not fail the step by itself: the tests known to fail today
# (tests/KNOWN_FAILING_TESTS) may fail, any other fails it, and so does a listed test
# that passes. nextest's exit code 100 is "tests failed"; any other is its own error
# (a build error, a bad filter) and fails the step at once.
status=0
cargo nextest run "${scope[@]}" --cargo-profile ci --locked --profile ci --no-tests=pass \
--ignore-default-filter -E "($base) & not (package(=solidcraft-gpu) & test(/^path::/))" || status=1
if [ "$status" != 0 ]; then
# A failed golden gets the hint to re-record it (junit.xml lists the failures).
if [ -f "$junit" ] && tr '\n' ' ' < "$junit" | grep -q '<testcase name="tests::robustness_goldens::[^"]*"[^>]*>[[:space:]]*<failure'; then
echo "::error::A robustness golden changed. If the new result is intended, re-record it in this pull request and say why:"
echo "::error::ROBUSTNESS_GOLDENS_BLESS=\"why it changed\" cargo test --profile ci -p solidcraft-engine --lib robustness_goldens:: (see docs/robustness.md)"
fi
exit 1
fi
--ignore-default-filter -E "($base) & not (package(=solidcraft-gpu) & test(/^path::/))" || status=$?
if [ "$status" -ne 0 ] && [ "$status" -ne 100 ]; then exit "$status"; fi
@@ -10,6 +10,7 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
- No GPL/LGPL/AGPL code, not even reading it (OpenCASCADE, FreeCAD, SolveSpace, CadQuery, LibreCAD, QCAD): `cargo xtask licences --check`.
- Every asset is original or openly licensed with a row in ATTRIBUTION.md; read `assets/AGENTS.md` before icon work: `cargo xtask assets`, `cargo xtask icons`.
- Never crash: no unwrap/expect/panic/unsafe in non-test code (unsafe allowlist in crash-safety), errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
- Model decisions (what an operation does, which bodies it touches, which face or edge a point or name means, depths, nearness) use exact geometry; a mesh is for display, export, previews and mesh bodies (`xtask/mesh-decisions.txt` only shrinks): `cargo xtask mesh-decisions`.
- Everything is a command and programmatic calls never open dialogs: `skills/solidcraft-commands/SKILL.md`.
- One outer UI container, one camera path (`navigation::handle`), colours from theme tokens: `cargo xtask ui-containers`.
@@ -22,6 +23,7 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
- A changed default keeps the old behaviour behind a preference and fills the PR's `Changes a default:` line, and no second PR for an issue a lower-numbered one closes: `pr-checks.yml`.
- A regression test goes in the area's existing test file, never a per-bug file (#3226).
- Look at open PRs first, claim with a draft PR (lowest number wins), one topic per PR, never force-push `main`, no pushes just to catch up with `main`: `skills/solidcraft-contributing/SKILL.md`.
- A PR's title and first sentence make sense to someone who never saw your chat or the issue: `skills/solidcraft-contributing/SKILL.md`.
- Show observable changes with real screenshots or a recording, captured yourself.
- Run `cargo xtask ci` before every commit, without switching branches while it runs. `cargo xtask skills` keeps this file and `skills/` honest.
@@ -103,6 +103,22 @@ Editable drawing code, native projects and shipped exports are collected under `
| tests/step-conformance/tiny_pin.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/torus_ring_nurbs.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/washer.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/kernel-cases/import/1721-closed-bspline-tube-face/input.step | step-conformance contributors | copy of tests/step-conformance/cylinder_nurbs.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#1721 | CC0-1.0 |
| tests/kernel-cases/import/2043-outer-bound-opposing-surface-sense/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#2043 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/258-cone-point-vertex/input.step | step-conformance contributors | copy of tests/step-conformance/cone_point_vertex.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/258-cone-to-point/input.step | step-conformance contributors | copy of tests/step-conformance/cone_point.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/258-tiny-pin/input.step | step-conformance contributors | copy of tests/step-conformance/tiny_pin.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/3098-bspline-edges-over-tiny-knot-span/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3098 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3208-extruded-ellipse-face-over-parameter-seam/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3208 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3352-vertex-off-its-edge-curve/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3352 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3730-void-oriented-shell-false/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3730 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3880-cylinder-seam-edge/input.step | step-conformance contributors | copy of tests/step-conformance/cylinder_seam.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#3880 | CC0-1.0 |
| tests/kernel-cases/import/3880-nurbs-hemisphere-dome/input.step | step-conformance contributors | copy of tests/step-conformance/dome_nurbs.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#3880 | CC0-1.0 |
| tests/kernel-cases/import/3963-closed-spline-edge-vertex-past-start/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3963 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4005-cylinder-written-as-near-zero-cone/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#4005 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4006-plane-written-as-cone-of-nearly-right-angle/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#4006 | MIT OR Apache-2.0 |
| tests/ssi-corpus/cases/*.json.gz, tests/ssi-corpus/LICENSE-MIT, tests/ssi-corpus/LICENSE-APACHE | ssi-corpus contributors (jyviko) | 119 surface/surface intersection cases with exact ground truth from https://github.com/jyviko/ssi-corpus (cases/data, b04c8a6), gzip-compressed, unchanged; SSI scorer fixtures (tests/ssi-corpus/README.md) | MIT OR Apache-2.0 |
| tests/ssi-corpus/cases/y23_*.json.gz | Yang, Jia and Yan (paper authors: published surfaces, figures and topology); ssi-corpus contributors (reconstructions and truth) | 25 cases built from Yang, Jia & Yan 2023, "Topology Guaranteed B-Spline Surface/Surface Intersection", ACM Transactions on Graphics 42(6), Article 211; each cites the paper in its `source` field | CC-BY 4.0 (paper); MIT OR Apache-2.0 (case files) |
| tests/step-regressions/rod_doubled_edge.step | SolidCraft contributors | written by SolidCraft from the commands of #4598 (a bored rod moved 100 mm and exported); import regression fixture | MIT OR Apache-2.0 |
| tests/oracle/17-loft/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/17-loft/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
| tests/oracle/23-bracket-multifeature/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/23-bracket-multifeature/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
@@ -189,11 +205,7 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/shaders/viewport.wgsl | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
| assets/styles/ui/palettes.rs | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-dark.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-dark-hard.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-dark-soft.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-light.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-light-hard.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-light-soft.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/solidcraft-95.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
| assets/styles/ui/themes/platinum-9.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
| assets/styles/ui/themes/cupertino.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
@@ -634,6 +646,132 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| docs/book/src/generated/equation-wave.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-wave.json`; gitignored) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/print_face.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/locales/fi.json | SolidCraft contributors | Original Finnish translation of SolidCraft's English catalog, AI-assisted (Claude Code) clean-room from the English and not yet reviewed line by line by a native speaker; no commercial CAD text used | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/plane_axis_point.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-2x.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-2x.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-4x.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-4x.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-8x.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-8x.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-off.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-off.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/agent-pointer-speed.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/agent-pointer-speed.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/ao-on.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/ao-on.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/assembly-move.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/assembly-move.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-card.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-card.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-column.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-column.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-axes.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-axes.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-bends.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-bends.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-draft.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-draft.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-failed.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-failed.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-fixed.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-fixed.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-projected.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-projected.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/direct-interaction.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/direct-interaction.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/frame-rate.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/frame-rate.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-bottom.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-bottom.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-in-browser.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-in-browser.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-left.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-left.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-under-browser.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-under-browser.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/layout-schematic.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/layout-schematic.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/measure-axis-distances.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/measure-axis-distances.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/mouse-mapping.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/mouse-mapping.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-axes.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-axes.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-cube.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-cube.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-centre.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-centre.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-cursor.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-cursor.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-origin.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-origin.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-y-up.dark.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-y-up.light.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-z-up.dark.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-z-up.light.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/quick-measure.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/quick-measure.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-bodies.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-bodies.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-faces-edges.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-faces-edges.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-conflict.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-conflict.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-keep.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-keep.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-previous.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-previous.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-unless-turned.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-unless-turned.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-guides.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-guides.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-hide-glyphs.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-hide-glyphs.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-state-icons.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-state-icons.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/style-shaded-edges.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/style-shaded-edges.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-coarse.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-coarse.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-fine.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-fine.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-normal.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-normal.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-ultra.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-ultra.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-dark.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-dark.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-gruvbox.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-gruvbox.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-imported.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-imported.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-light.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-light.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-dark-half.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-dark-half.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-light-half.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-light-half.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-cursor.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-cursor.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-extrude.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-extrude.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-hole.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-hole.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-placement.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-placement.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/vertex-markers.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/vertex-markers.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-angles.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-angles.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-grid.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-grid.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-perspective.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-perspective.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-shadow.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-shadow.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| `assets/locales/pending/sketch-offset-instances.json` | SolidCraft contributors | Original offset instance-count label and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/settings_profile.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original analytic head and shoulder geometry for settings profiles | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4561-convert-box-mesh-with-a-zero-area-triangle/box-degenerate.stl | SolidCraft contributors | synthetic ASCII STL written by hand: a box with one zero-area triangle, for the kernel regression case of tangency-labs/solidcraft#4561 | MIT OR Apache-2.0 |
## Code adapted from sibling projects
@@ -673,6 +811,15 @@ in THIRD-PARTY-LICENSES.txt; no images or artwork from that project are copied.
The glTF test files are built by the tests themselves (crates/io/src/gltf_in_tests.rs,
crates/engine/src/tests/gltf_import.rs); no third-party models are committed.
## Geometry kernel crates
| Crate | Used for | Licence |
|---|---|---|
| solidcore (https://github.com/tangency-labs/solidcore, pinned by rev in Cargo.toml) | the Rust port of NVIDIA's SMLib: the B-rep kernel behind crates/smlib | Apache-2.0 (its NOTICE credits NVIDIA's USD BRep) |
Linked as a crate; no code from it is copied into SolidCraft. Its licence text and NOTICE go
into THIRD-PARTY-LICENSES.txt when `main` regenerates it.
## FreeCAD and Rhino import library
FreeCAD `.FCStd` and Rhino `.3dm` files are read with [cadmpeg](https://github.com/cadmpeg/cadmpeg)
@@ -688,17 +835,13 @@ copied into SolidCraft.
| SolidCraft file | Original contribution | Licence |
|---|---|---|
| crates/ui-egui/src/viewport.rs (`nearest_quarter_turn`, `axis_view_orbit`) | N3MI-DG's [PR #101](https://github.com/bherbruck/solidcraft/pull/101): [minimal TOP/BOTTOM turns](https://github.com/bherbruck/solidcraft/commit/c28e780f52490784ef5886f094b9d3f6d10c3e3f) and [drag-to-orbit](https://github.com/bherbruck/solidcraft/commit/f30b30be6ecc4e2e6544a851243137c01a354934), adapted to the axis gizmo | MIT OR Apache-2.0 |
| crates/smlib/src/core/offset.rs (`draft`: the tilted planes and `SmBrep::LocalOperation`, the tail of the capi's `draft_faces`) | ablasik's `draft` in `crates/smlib/src/ffi/rs_ops2.rs` on [ablasik/solidcraft `app/solidcore-backend-on-develop`](https://github.com/ablasik/solidcraft/blob/9c7e8e31565e1823f0591b58e2967351c32af13f/crates/smlib/src/ffi/rs_ops2.rs), adapted to `core::offset`'s errors and checks | MIT OR Apache-2.0 |
## Vendored third-party code
| Directory | Source | Licence | Changes |
|---|---|---|---|
| vendor/accesskit_macos | accesskit_macos 0.26.3, https://github.com/AccessKit/accesskit (The AccessKit contributors) | MIT OR Apache-2.0 | the subclassing adapter and its tests from 0.27.2: dropping the adapter keeps AppKit's key-value observers (vendor/README.md) |
| vendor/truck-shapeops | truck-shapeops 0.4.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | robust meshing and nearest-parameter fallback in booleans; degenerate intersection-curve rejection; face and edge history of booleans; trace macro; corner choice at vertices several intersection curves end on; reuse of an operand's meshes (vendor/README.md) |
| vendor/truck-geometry | truck-geometry 0.5.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | intersection curves divided from their neighbours' surface parameters; surface second derivatives (vendor/README.md) |
The naming corpus checks persistent names: every name a corpus design stores still finds a face or
an edge, and two builds name its faces and edges alike
(`cargo test --profile ci -p solidcraft-cli --test naming_corpus`).
[docs/mutation-testing.md](docs/mutation-testing.md) shows how to find kernel behaviour these
black-box suites miss.
@@ -221,8 +224,7 @@ Pull requests skip a few heavy tests (one to twelve minutes each), which run in
Check that validation after merging. They are listed in
`.config/nextest.toml` and the [testing page](docs/book/src/dev/testing.md):
- `solidcraft-engine`: `tests::hostile_params_never_panic`, everything in `tests::robustness` and
the seeds of `tests::robustness_goldens` (`seed_00` … `seed_95`; pull requests that change the kernel, truck or the goldens run all but the slowest, `SLOW_SEEDS` in `ci.yml`),
- `solidcraft-engine`: `tests::hostile_params_never_panic`, everything in `tests::robustness`,
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n";
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--profile-out trace.json] [--json-out FILE] [--allow-errors] [--validation each_step|each_feature|off]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--validation: when SMLib's full check runs on the features computed (diagnostics.validation), default each_feature)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n (--profile also records where the time goes, SMLib's calls, kernel operations, features, commands and import stages,\n and prints the table to stderr: count, total, self time and longest per span; --profile-out FILE writes the spans\n as a Chrome trace for chrome://tracing or ui.perfetto.dev; SOLIDCRAFT_PROFILE=1 does the same for any command)\n";
/// `eval`'s lines in the usage.
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n";
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] [--profile] [--profile-out trace.json] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n (--profile and --profile-out as for run)\n";
/// `script`'s lines in the usage.
constUSAGE_SCRIPT: &str=" solidcraft-cli script <design.sc|script.json> [--out script.json]\n (the design's history as a command script that eval and run replay)\n";
/// `bench-open`'s lines in the usage.
constUSAGE_BENCH_OPEN: &str=" solidcraft-cli bench-open <design.sc | part.step> [--parse-only] [--save OUT.sc] [--display LEVEL [--edit NAME EXPR]] [--ops script.json]\n (--ops: after opening, run each command of the script and undo it, timing the command, the\n evaluations it caused and the view it leaves: placing and meshing what changed)\n";
constUSAGE_BENCH_OPEN: &str=" solidcraft-cli bench-open <design.sc | part.step> [--parse-only] [--save OUT.sc] [--display LEVEL [--edit NAME EXPR]] [--ops script.json] [--profile] [--profile-out trace.json]\n (--profile and --profile-out as for run)\n (--ops: after opening, run each command of the script and undo it, timing the command, the\n evaluations it caused and the view it leaves: placing and meshing what changed)\n";
constUSAGE_SNAPSHOT: &str=" solidcraft-cli snapshot <script|design> [--in design.sc|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27]\n solidcraft-cli snapshot --in <design.sc|part.step> --out shot.png ...\n (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n it shows) and color #rrggbb, either or both, once per body;\n --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n is visible inside the material it meets; a later --body overrides it;\n --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON)\n";
constUSAGE_SNAPSHOT: &str=" solidcraft-cli snapshot <script|design> [--in design.sc|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27] [--quality coarse|normal|fine|ultra]\n solidcraft-cli snapshot --in <design.sc|part.step> --out shot.png ...\n (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n it shows) and color #rrggbb, either or both, once per body;\n --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n is visible inside the material it meets; a later --body overrides it;\n --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON;\n --quality: the display quality the bodies are meshed at, as the app's setting (default normal))\n";
constUSAGE_KERNEL_CASES: &str=" solidcraft-cli kernel-cases <case-dir>... [--json] [--dumps=DIR] [--validation=each_step|each_feature|off]\n (the kernel regression rig, tests/kernel-cases, on SMLib; --dumps: each case's\n failing SMLib calls leave their inputs for replay in DIR/<area>-<case>; --validation: when SMLib's\n full check runs (diagnostics.validation), default each_feature)\n";
out.push(format!("{n} at {x:?}, then {m} at {y:?}"));
}
}
for((r,_),(q,_))ina.refs.iter().zip(&b.refs){
ifr!=q{
out.push(format!("{r}, then {q}"));
}
}
ifa.refs.len()!=b.refs.len(){
out.push(format!("{} stored names, then {}",a.refs.len(),b.refs.len()));
}
out.truncate(cap);
out
}
/// Designs whose names differ from one build to the next today: (design, why). Their
/// differences are printed, not failed on, until the cause is fixed; a stored name that finds
/// nothing still fails.
constUNSTABLE: [(&str,&str);1]=[(
"regressions/closed_sweep_torus_cut",
"the halves of each swept wall lie level along every axis, so which is `#1` and which `#2` follows the order the kernel gives the faces in, which changes from one build to the next",
"Back to the original order":"Nazad na izvorni redoslijed",
"Ball":"Kuglasti",
"Bar":"Šipka",
"Base Center":"Centar osnove",
@@ -595,6 +596,8 @@
"Snap to face and edge centres":"Privlači na centre lica i ivica",
"SolidCraft cannot submit reports directly. Submit on GitHub; no token is needed in the app.":"SolidCraft ne može slati izvještaje direktno. Pošaljite ih na GitHubu; u aplikaciji nije potreban token.",
"SolidCraft closed before these designs were saved. Their last autosave can be opened.":"SolidCraft se zatvorio prije nego što su ovi dizajni sačuvani. Može se otvoriti njihovo posljednje automatsko čuvanje.",
"Sort A to Z":"Sortiraj od A do Ž",
"Sort Z to A":"Sortiraj od Ž do A",
"Spacing 2 must be a non-zero number":"Razmak 2 mora biti broj različit od nule",
"Spacing must be a non-zero number":"Razmak mora biti broj različit od nule",
"dialog.no_shown_body":"Nema prikazanog tijela za izmjenu: prikažite jedno ili izaberite Novo tijelo",
"dialog.pattern_sketch_not_object":"Izaberite tijela ili operacije: skica nije ni jedno ni drugo. Ponovite njene krive pomoću alata Niz ili Preslikaj u samoj skici ili je prvo ekstrudirajte.",
"dialog.select":"↖ Izaberi",
"dialog.selected_count":"↖ Izabrano: {count}",
"dialog.selection_guidance":"Izaberite ulaz da ga promijenite. Kliknite izabrane objekte da ih uklonite; Ctrl/Cmd-klik ih također uključuje i isključuje. Pogledajte pregled, a zatim pritisnite U redu.",
@@ -1387,21 +1408,168 @@
"from the rule":"iz pravila",
"help.apache":"Apache licenca 2.0",
"help.appearance.assign":"Daje izabranim tijelima, licima ili komponentama boju ili izgled materijala, bez promjene njihove težine. Koristite ga da razlikujete dijelove ili pregledate završnu obradu.",
"help.assembly.bom":"Navodi dijelove dizajna ili komponente s njihovim količinama, po broju dijela, a popis može sačuvati kao CSV ili JSON. Koristite je kao popis dijelova za naručivanje i montažu.",
"help.canvas.decal":"Postavlja sliku na ravno lice modela, poput naljepnice. Koristite je da prikažete etiketu, logotip ili štampani uzorak na dijelu.",
"help.canvas.edit":"Mijenja platno: njegov položaj, veličinu, ugao, neprozirnost, preslikavanje, vidljivost ili naziv. Koristite ga da poravnate referentnu sliku sa skicom kojom je precrtavate.",
"help.canvas.insert":"Postavlja PNG ili JPEG sliku na ravan ili lice kao prozirnu referencu. Koristite je da u skici precrtate fotografiju ili crtež, uz sliku skaliranu na poznatu veličinu.",
"help.component.break_link":"Odvaja povezanu komponentu od njene datoteke dizajna, a njena tijela ostavlja kakva jesu. Koristite ga kada dio više ne treba pratiti izmjene izvorne datoteke.",
"help.component.capture_position":"Zadržava položaje dijelova koje ste ručno pomjerili, tako da to postaju njihovi stvarni položaji. Koristite ga nakon što ručno namjestite dijelove koje nijedan spoj ne drži.",
"help.component.create":"Dodaje novu, praznu komponentu u dizajn, unutar aktivne komponente osim ako izaberete drugog roditelja. Koristite je da novi dio sklopa dobije vlastito mjesto za tijela i skice.",
"help.component.finish_edit":"Čuva dio koji uređujete na mjestu, vraća se u njegov sklop i ažurira sklop prema njemu. Upotrijebite kada završite izmjene povezanog dijela.",
"help.component.from_bodies":"Pretvara svako izabrano tijelo u zasebnu komponentu, nazvanu po tijelu. Koristite ga kada dizajn izgrađen od odvojenih tijela treba postati sklop čiji se dijelovi mogu spajati i pomjerati.",
"help.component.insert_design":"Umeće drugi sačuvani dizajn kao komponentu povezanu s njegovom datotekom, s njegovim punim tijelima postavljenim onako kako su tamo. Koristite ga da ponovo upotrijebite dio u sklopu i kasnije izmjene preuzmete pomoću Ažuriraj veze.",
"help.component.properties":"Prikazuje zapreminu, masu, centar mase i momente inercije komponente, prema materijalima njenih tijela. Koristite ga da provjerite težinu i uravnoteženost sklopa.",
"help.component.revert_position":"Vraća dijelove koje ste ručno pomjerili tamo gdje su bili, odbacujući pomjeranja koja nisu zadržana. Koristite ga da poništite probna pomjeranja u sklopu.",
"help.component.update_links":"Ponovo čita povezane datoteke dizajna i zamjenjuje tijela tamo gdje su se promijenila. Koristite ga nakon uređivanja dijela koji ovaj sklop koristi.",
"help.config.configure":"Dodaje parametre, operacije, materijale ili izglede kao kolone tabele konfiguracija. Koristite ga da napravite varijante jednog dizajna, npr. veličine nekog dijela.",
"help.config.preview":"Provjerava može li se red tabele konfiguracija ponovo izgraditi, bez promjene dizajna ili njegove vremenske trake. Koristite ga prije prelaska na varijantu u koju niste sigurni.",
"help.config.rules":"Prikazuje pravila tabele konfiguracija, njene redove i koji je red aktivan. Koristite ga da vidite kako su postavljene varijante dizajna.",
"help.config.table":"Prikazuje tabelu konfiguracija: jedan red po varijanti, jednu kolonu po parametru ili operaciji i da li dizajn još odgovara aktivnom redu. Koristite je da pregledate varijante dizajna.",
"help.connect_note":"Ponovo pokrenite svaki asistent da učita SolidCraft server. Svaka datoteka je sigurnosno kopirana kao .bak prije promjene.",
"help.connect_title":"Poveži AI asistente",
"help.construct.axis.edge":"Pravi pomoćnu osu duž ravne ivice ili linije skice. Koristite je kao osu za rotaciju, kružni niz ili spoj.",
"help.construct.axis.normal_to_face":"Pravi pomoćnu osu kroz tačku, okomitu na lice. Koristite je kao osu koja stoji pravo iz površine.",
"help.construct.axis.through_cylinder":"Pravi pomoćnu osu kroz centar cilindričnog, konusnog ili torusnog lica, ili kružne ivice. Koristite je da operacije okrećete ili ih postavljate u niz oko okruglog dijela.",
"help.construct.axis.two_planes":"Pravi pomoćnu osu gdje se sastaju dvije ravni ili ravna lica. Koristite je kada je osa koja vam treba linija između dva lica.",
"help.construct.axis.two_points":"Pravi pomoćnu osu kroz dvije tačke, vrhove ili tačke skice. Koristite je za osu koja prolazi između dva poznata položaja.",
"help.construct.plane.along_path":"Pravi pomoćnu ravan okomitu na ivicu ili krivu, na nekom položaju duž nje. Koristite je da skicirate profil za povlačenje ili presjek putanje.",
"help.construct.plane.at_angle":"Pravi pomoćnu ravan zakrenutu za ugao u odnosu na ravan ili lice, oko ose ili ivice. Koristite je za nagnute skice, npr. kutni nosač.",
"help.construct.plane.midplane":"Pravi pomoćnu ravan na pola puta između dvije ravni ili ravna lica, ili koja ih raspolavlja tamo gdje se sastaju pod uglom. Koristite je kao ravan simetrije za preslikavanje.",
"help.construct.plane.offset":"Pravi pomoćnu ravan paralelnu s ravni ili ravnim licem, na određenoj udaljenosti ili kroz tačku. Koristite je da skicirate na zadatoj visini iznad lica.",
"help.construct.plane.perpendicular":"Pravi pomoćnu ravan koja sadrži liniju ili ivicu i okomita je na ravan ili lice. Koristite je da skicirate uspravno na modelu duž ivice.",
"help.construct.plane.tangent":"Pravi pomoćnu ravan koja u jednoj tački dodiruje cilindar, konus, sferu ili torus. Koristite je da skicirate na boku okruglog dijela.",
"help.construct.plane.three_points":"Pravi pomoćnu ravan kroz tri tačke. Koristite je za ravan određenu položajima na modelu, npr. s tri ugla.",
"help.construct.plane.two_edges":"Pravi pomoćnu ravan kroz dvije ravne ivice ili linije koje leže u jednoj ravni. Koristite je za ravan kroz dio, npr. kroz dvije suprotne ivice.",
"help.construct.point.along_path":"Pravi pomoćnu tačku na nekom položaju duž ivice ili krive. Koristite je kao referencu negdje duž putanje.",
"help.construct.point.center":"Pravi pomoćnu tačku u centru kružne ivice, kruga ili luka skice, sfere ili torusa. Koristite je kao referencu za rupe, ose i spojeve.",
"help.construct.point.edge_plane":"Pravi pomoćnu tačku gdje ivica ili linija prolazi kroz ravan ili ravno lice. Koristite je da označite gdje putanja siječe ravan.",
"help.construct.point.three_planes":"Pravi pomoćnu tačku gdje se sastaju tri ravni ili ravna lica. Koristite je kao referencu ugla, čak i tamo gdje model nema vrh.",
"help.construct.point.two_edges":"Pravi pomoćnu tačku gdje se dvije ivice ili linije sastaju ili su najbliže. Koristite je kao referencu u virtualnom uglu.",
"help.construct.point.vertex":"Pravi pomoćnu tačku na vrhu ili tački skice. Koristite je kao referencu koja ostaje kada se skica ili tijelo oko nje sakrije.",
"help.contact.check":"Navodi parove dijelova u skupovima kontakata koji se u trenutnom položaju međusobno presijecaju. Koristite ga da pronađete sudare prije nego što pokrenete spojeve ili studiju kretanja.",
"help.contact.create":"Grupiše dva ili više dijelova u skup kontakata čija se tijela sprečavaju da prolaze jedno kroz drugo dok se spojevi kreću. Koristite ga za dijelove koji treba da se zaustave kad se dodirnu, npr. poluga uz svoj graničnik.",
"help.contact.disable_all":"Isključuje kontakt, pa se pokretani spojevi i studije kretanja više ne zaustavljaju tamo gdje se dijelovi dodiruju. Koristite ga da ponovo slobodno pomjerate dijelove ili da veliki sklop ostane brz u radu.",
"help.contact.edit":"Mijenja skup kontakata: dijelove koje sadrži, njegov naziv ili da li je potisnut; može i izbrisati skup. Koristite ga da podesite koji dijelovi ne smiju prolaziti jedan kroz drugi.",
"help.contact.enable_all":"Stavlja svaki dio sklopa u jedan skup kontakata, pa nijedna dva dijela ne mogu prolaziti jedan kroz drugi dok se spojevi kreću. Koristite ga za brzu provjeru cijelog mehanizma.",
"help.contact.enable_sets":"Uključuje kontakt za skupove kontakata koje ste definisali, pa se pokretani spojevi i studije kretanja zaustavljaju tamo gdje bi njihovi dijelovi prošli jedan kroz drugi. Koristite ga da vratite svoje skupove nakon isključivanja kontakta.",
"help.contact.list":"Navodi skupove kontakata dizajna, dijelove u svakom od njih i da li je kontakt uključen. Koristite ga da provjerite kako je kontakt postavljen prije nego što pokrenete sklop.",
"help.document.inspect":"Prikazuje pregled dizajna: njegove komponente, tijela, skice, operacije i parametre. Koristite ga da se snađete u dizajnu koji niste sami napravili.",
"help.document.units":"Mijenja jedinice u kojima dizajn prikazuje dužine, npr. mm ili inče. Geometrija zadržava veličinu; mijenjaju se samo prikaz i brojevi bez jedinice.",
"help.edit.checkpoint":"Pamti dizajn, aktivnu skicu i historiju poništavanja onakve kakvi su sada. Koristite ga prije nego što isprobate nešto rizično od čega ćete se možda htjeti vratiti.",
"help.edit.restore_checkpoint":"Vraća se na kontrolnu tačku, uključujući historiju poništavanja. Koristite ga da jednim korakom odbacite sve urađeno od kontrolne tačke.",
"help.explode.create":"Pravi rastavljeni prikaz koji odguruje dijelove od centra sklopa ili prema pomjeranjima koja zadate. Koristite ga da pokažete kako se sklop sastavlja, za uputstva ili prezentacije.",
"help.face.delete":"Uklanja izabrana lica i pušta da susjedna lica zatvore otvor, ili ostavlja otvor otvorenim kao površ. Koristite ga da uklonite zaobljenu ivicu, rupu ili ispupčenje koje smeta.",
"help.file.insert_mesh":"Dodaje 3MF, STL, OBJ, PLY ili glTF datoteku u dizajn kao mrežna tijela u novoj komponenti. Koristite ga da pored svog dizajna kao referencu postavite preuzeti ili skenirani model.",
"help.file.insert_step":"Dodaje STEP, IGES, FreeCAD ili Rhino datoteku u dizajn kao puna tijela u novoj komponenti; dijelovi sklopa postaju ugniježđene komponente. Koristite ga da uvezete modele od dobavljača ili iz drugih CAD programa.",
"help.file.save_mesh":"Čuva tijela kao STL, 3MF ili OBJ mrežu, s glatkoćom zakrivljenih lica koju izaberete. Koristite ga da pripremite dijelove za 3D štampu ili za programe koji čitaju mreže.",
"help.file.send_to_slicer":"Čuva izabrana tijela kao 3MF datoteku i otvara je u slajseru koji izaberete. Koristite ga da od modela do štampe dođete jednim korakom.",
"help.font_details":"Interfejs koristi ugrađene fontove biblioteke egui (Ubuntu Light i Hack, pod licencama Ubuntu Font Licence i MIT/Bitstream Vera; Noto Emoji i font emoji ikona, pod licencama OFL i MIT). Tekst skice koristi Liberation Sans (SIL OFL 1.1). Neobavezni paket fontova Crafting Apps, craft-fonts (BIZ UDPGothic, Shippori Mincho, BIZ UDMincho, Noto Sans CJK SC, Noto Sans Arabic; SIL OFL 1.1), nije uključen u izdanja SolidCrafta.",
"help.fonts":"Fontovi",
"help.frame.member":"Postavlja profil, npr. cijev ili aluminijski ekstruzioni profil, duž linija skice konstrukcije, po jedan konstrukcioni profil na liniju. Koristite ga za izradu okvira, regala i zavarenih konstrukcija.",
"help.inspect.accessibility":"Boji lica do kojih alat može doći iz jednog smjera i ona do kojih ne može. Koristite ga da provjerite dio za obradu ili izradu u kalupu s te strane.",
"help.inspect.center_of_mass":"Prikazuje centar mase tijela, svakog posebno i svih zajedno, uz ujednačenu gustoću. Koristite ga da provjerite ravnotežu i na koju stranu će se dio prevrnuti.",
"help.inspect.colored_components":"Daje svakoj komponenti vlastitu privremenu boju, bez promjene izgleda. Koristite ga da na prvi pogled razlikujete dijelove sklopa.",
"help.inspect.compare":"Upoređuje dva tijela i pokazuje gdje jedno ima materijala kojeg drugo nema, uz zapreminu i odstupanje. Koristite ga da provjerite izmijenjen ili uvezen dio u odnosu na original.",
"help.inspect.continuity":"Provjerava koliko glatko se lica sastaju duž svojih ivica: otvorene krajeve, pregibe ili skokove zakrivljenosti, i boji spojeve. Koristite ga da pronađete gdje se površi ne spajaju čisto.",
"help.inspect.curvature_comb":"Crta češljeve duž kriva, ivica ili lica čiji zupci pokazuju koliko se jako savijaju. Koristite ga da uočite ravna mjesta, pregibe i neujednačenu zakrivljenost.",
"help.inspect.curvature_map":"Boji lica prema tome koliko su zakrivljena, crveno gdje je poluprečnik mali. Koristite ga da pronađete mjesta oštre zakrivljenosti i procijenite koliko je površ glatka.",
"help.inspect.draft":"Boji lica prema uglu nagiba u odnosu na smjer vađenja iz kalupa i označava ona s premalim nagibom. Koristite ga da provjerite dio prije brizganja ili livenja.",
"help.inspect.environment_map":"Prikazuje model sa sjajnom završnom obradom koja reflektuje poput ogledala. Koristite ga da procijenite tok površi prema načinu na koji se refleksije protežu preko njih.",
"help.inspect.interference":"Pronalazi tijela koja se preklapaju i prikazuje svako preklapanje s njegovom zapreminom. Koristite ga da u sklopu provjerite ima li dijelova koji se sudaraju.",
"help.inspect.isocurve":"Crta izokrive lica (izoparametarske krive), mrežu na kojoj je površ izgrađena. Koristite ga da vidite kako površ teče i gdje se zgušnjava.",
"help.inspect.measure":"Mjeri dužine, udaljenosti, uglove, površine i poluprečnike između onoga što izaberete, ili zapreminu i masu tijela. Koristite ga da provjerite veličine i zazore.",
"help.inspect.minimum_radius":"Pronalazi najmanji poluprečnik zakrivljenosti kriva, ivica ili lica i gdje se nalazi. Koristite ga da provjerite može li alat ili mlaznica pratiti oblik.",
"help.inspect.section":"Otvara prikaz presjekom duž ravni i šrafira presječena lica, bez promjene modela. Koristite ga da pogledate unutrašnjost dijelova i sklopova.",
"help.inspect.zebra":"Prikazuje crno-bijele pruge reflektovane na licima modela. Koristite ga da procijenite glatkoću: pruge koje se prekidaju ili lome na ivici pokazuju loš prelaz.",
"help.joint.as_built":"Spaja dva dijela tamo gdje već jesu, bez pomjeranja ijednog od njih, i određuje kako se još smiju kretati. Koristite ga za dijelove koje ste već postavili u konačni položaj.",
"help.joint.cam":"Povezuje brijeg koji se okreće s pratiocem, pa pratilac klizi ili se ljulja dok obris brijega prolazi ispod njega. Koristite ga za brijegove, ekscentre i pogone ventila.",
"help.joint.create":"Spaja dva dijela u ishodištima spoja koja izaberete i pomjera drugi dio na mjesto; vrsta spoja određuje kako se još smiju kretati. Koristite ga da napravite sklop čiji se dijelovi kreću kao pravi mehanizam.",
"help.joint.drive":"Zadaje ugao ili udaljenost spoja i s njim pomjera dijelove, u okviru njegovih granica; povezani spojevi i zatvorene petlje ga prate. Koristite ga da provjerite kreće li se mehanizam kako je zamišljeno.",
"help.joint.gear":"Povezuje dva rotaciona spoja prijenosnim omjerom, pa pokretanje jednog okreće drugi. Koristite ga za čeone i prstenaste zupčanike, s omjerom iz podionih poluprečnika ili broja zubaca.",
"help.joint.limits":"Zadaje koliko daleko se spoj smije okrenuti ili pomjeriti, kao minimum i maksimum, ili uklanja te granice. Koristite ga da šarku, klizač ili polugu zadržite unutar njihovog stvarnog raspona kretanja.",
"help.joint.motion_link":"Veže dva spoja omjerom i pomakom, pa pokretanje jednog pomjera drugi. Koristite ga za čvrst odnos između spojeva koji Zupčanik, Zupčasta letva i zupčanik ili Vijak ne pokrivaju.",
"help.joint.origin":"Postavlja imenovano ishodište spoja na dio: u centar lica ili okruglog kraja, sredinu ivice, ugao ili tačku. Koristite ga da pripremite gdje se spojevi vezuju; ishodište izabrano na licu prati ga kada dio promijeni veličinu.",
"help.joint.rack_pinion":"Povezuje mali zupčanik koji se okreće sa zupčastom letvom koja klizi, pa se letva pomjera za dužinu podione kružnice koju mali zupčanik prevali. Koristite ga za pogone sa zupčastom letvom, upravljanje i linearne stolove.",
"help.joint.reach":"Pomjera tačku na dijelu prema cilju mijenjajući spojeve u njegovom lancu, u okviru njihovih granica. Koristite ga da namjestite mehanizam prema tome gdje treba biti njegov kraj, npr. vrh robotske ruke.",
"help.joint.rigid_group":"Zaključava izabrane dijelove zajedno onakve kakvi jesu, pa se kreću kao jedan. Koristite ga za dijelove koji zajedno pripadaju i između kojih nema kretanja.",
"help.joint.screw":"Povezuje okretanje i klizanje korakom, pa se svakim okretajem napreduje za tu udaljenost. Koristite ga za navojna vretena, vijke i navojne osovine.",
"help.library.apply":"Primjenjuje materijal ili izgled iz lokalne datoteke biblioteke na tijela, lica ili komponente. Koristite ga da ponovo upotrijebite materijale koje ste sačuvali iz drugog dizajna.",
"help.library.export":"Čuva materijale i izglede dizajna u datoteku biblioteke. Koristite ga da ih dijelite ili ponovo koristite u drugim dizajnima.",
"help.library.inspect":"Provjerava datoteku biblioteke i navodi njene materijale i izglede, bez promjene dizajna. Koristite ga da vidite šta biblioteka sadrži prije nego što je primijenite.",
"help.licences":"Licence",
"help.material.assign":"Određuje od čega su izabrana tijela napravljena, npr. čelik, aluminij ili ABS. Koristite ga da masa i težina odgovaraju stvarnom dijelu.",
"help.material.properties.validate":"Provjerava karticu podataka materijala na usklađenost brojeva i vrijednosti koje nedostaju. Koristite ga prije nego što se oslonite na podatke za masu ili krutost.",
"help.mesh.convert":"Ponovo gradi mrežno tijelo, npr. STL, kao uredivo puno tijelo s ravnim i cilindričnim licima. Koristite ga da izmijenite uvezene mehaničke dijelove kao modelirano tijelo.",
"help.mit":"MIT licenca",
"help.motion.study":"Zadaje vrijednosti spojeva u koracima na vremenskoj traci i reprodukuje ih kao animaciju. Koristite ga da posmatrate kako se mehanizam kreće kroz niz pokreta i usput provjerite zazore.",
"help.motion.trace":"Prati putanju kojom ide tačka na dijelu dok se reprodukuje studija kretanja ili se pokreće spoj i, kada potvrdite, zadržava je kao krivu 3D skice. Koristite ga da vidite dokle mehanizam dosiže ili da nastavite graditi na njegovoj putanji.",
"help.notice":"NOTICE",
"help.occurrence.ground":"Učvršćuje dio na mjestu, ili ga ponovo oslobađa, tako da spojevi pomjeraju ostale dijelove oko njega. Koristite ga za okvir ili osnovu na kojoj je izgrađen ostatak sklopa.",
"help.occurrence.move":"Pomjera dio sklopa samo duž stepeni slobode koje dozvoljavaju njegovi spojevi. Izaberite lice dijela, a zatim prevucite dostupnu strelicu ili luk.",
"help.parameters.change":"Otvara tabelu imenovanih vrijednosti i izraza koji upravljaju kotama dizajna. Koristite je da promijenite mjeru na jednom mjestu, a sve operacije koje je koriste je slijede.",
"help.parameters.export":"Čuva parametre dizajna kao CSV ili JSON. Koristite ga da ih uredite u proračunskoj tabeli ili prenesete u drugi dizajn.",
"help.parameters.graph":"Prikazuje koji parametri i operacije koriste koje druge, te sve petlje ili greške među njima. Koristite ga da vidite šta sve zahvata promjena nekog parametra.",
"help.parameters.import":"Učitava parametre iz CSV ili JSON u dizajn, sve ili nijedan. Koristite ga da unesete vrijednosti iz proračunske tabele ili drugog dizajna.",
"help.parameters.move":"Pomjera korisnički parametar ispred ili iza drugog na popisu. Koristite ga da povezane parametre držite zajedno.",
"help.parts.fastener":"Dodaje standardni vijak, zavrtanj, maticu, podlošku, zatik ili ležaj u izabranoj veličini. Postavljen na rupu, naliježe u rupu pomoću spoja, pa spojne elemente ne morate sami modelirati.",
"help.parts.insert":"Umeće standardni dio u porodici, veličini i dužini koje izaberete. Postavljen na rub ili zid rupe, naliježe na rupu krutim spojem.",
"help.parts.library":"Otvara standardne dijelove: vijke, zavrtnjeve, matice, podloške, bezglave vijke, cilindrične zatike i ležajeve u standardnim veličinama. Koristite ga da dodate standardni dio umjesto da ga sami modelirate.",
"help.parts.resize":"Mijenja veličinu ili dužinu umetnutog standardnog dijela i ponovo ga gradi; njegovi spojevi ga drže na mjestu. Koristite ga kada se vijak pokaže predugim ili rupa traži drugu veličinu.",
"help.plastic.assign_rule":"Dodjeljuje pravilo za plastiku tijelima, pa njihove plastične operacije preuzimaju njegov nagib i zazor kao podrazumijevane vrijednosti. Koristite ga da jednom podesite brizgani dio za sve njegove operacije.",
"help.plastic.boss":"Dodaje ispust za vijak na licu: stub s neobaveznom rupom, nagibom, zaobljenjem u korijenu i potpornim rebrima. Koristite ga za tačke za vijke u brizganim ili štampanim kućištima.",
"help.plastic.lip":"Dodaje usnu ili odgovarajući utor duž ruba izdubljenog tijela. Koristite ga da se dvije polovine kućišta međusobno pozicioniraju i čvrsto zatvore.",
"help.plastic.manage_rules":"Pravi i uređuje pravila za plastiku: materijal, debljinu zida, poluprečnike, zazor i nagib. Koristite ih da operacije brizganog dijela ostanu usklađene.",
"help.plastic.rest":"Dodaje oslonac na licu: okruglu ili pravougaonu podlogu, punu ili šuplju, s nagibom. Koristite ga kao potporu ili odstojnik u brizganom kućištu.",
"help.plastic.snap_fit":"Dodaje kuku škljocajućeg spoja na licu, s njenom dužinom, debljinom i zapinjačem. Koristite ga da dijelove spojite zaklapanjem bez vijaka.",
"help.pointcloud.insert":"Umetnite PLY, XYZ ili PTS skeniranje kao oblak tačaka uz model. Koristite ga kao referencu pri izradi modela iz izmjerenih podataka.",
"help.sheet.convert":"Pretvara ploču ili izdubljeno tijelo ujednačene debljine u tijelo od lima, sa savijanjima na ivicama koje izaberete. Koristite ga da postojeći dio učinite razvijivim.",
"help.sheet.export_bend_table":"Čuva tabelu savijanja tijela od lima kao CSV ili JSON: uglove, poluprečnike i položaje savijanja u razvijenom obliku. Koristite ga za presu za savijanje ili radionicu.",
"help.sheet.export_dxf":"Čuva razvijeni oblik kao DXF, s obrisima, linijama savijanja i neobaveznim napomenama o savijanju. Koristite ga za rezanje laserom, plazmom ili vodenim mlazom.",
"help.sheet.flange":"Dodaje prirubnicu: osnovnu ploču iz skice, zid duž otvorene konture skice ili savijeni zid na ivicama lima. Koristite je za izgradnju dijelova od lima.",
"help.sheet.flat_pattern":"Pravi razvijeni oblik tijela od lima, s njegovom veličinom, izrezima i linijama savijanja. Koristite ga da provjerite pripremak prije rezanja.",
"help.sheet.fold":"Savija lim duž linije skice za zadati ugao i poluprečnik. Koristite ga da presavijete ravan lim nakon što u njemu izrežete operacije.",
"help.sheet.hem":"Presavija ivicu lima natrag preko sebe. Koristite ga za sigurne, krute ivice bez oštrih srha.",
"help.sheet.manage_rules":"Pravi i uređuje pravila za lim: debljinu, poluprečnik savijanja, K-faktor, rasterećenja i razmake. Koristite ih da se uskladite s materijalom i alatima svoje radionice.",
"help.sheet.path_flange":"Dodaje lanac prirubnica duž ivice lima, prateći otvoreni lanac linija skice. Koristite ga za profile poput U ili Z oblika u jednom koraku.",
"help.sheet.perforate":"Dodaje polje rupa preko cijelog ravnog lima, u izmaknutom ili kvadratnom rasporedu. Koristite ga za otvore za ventilaciju, rešetke i lakše ploče.",
"help.sheet.refold":"Ponovo presavija razvijeno tijelo od lima. Koristite ga nakon dodavanja operacija na ravan lim.",
"help.sheet.unfold":"Razvija sva savijanja tijela od lima. Koristite ga da dodate rupe ili rezove koji moraju prelaziti preko savijanja, a zatim ga ponovo presavijte.",
"help.sketch.arc.center_point":"Crta kružni luk oko tačke centra, od početne do završne tačke. Koristite ga kada je centar luka poznat, npr. poluprečnik oko rupe ili osovine.",
"help.sketch.arc.tangent":"Crta luk koji počinje na kraju linije ili luka i nastavlja se tangentno na njega. Koristite ga da lanac nastavite glatkim prelazom umjesto ugla.",
"help.sketch.arc.three_point":"Crta luk od početne do završne tačke kroz treću tačku. Koristite ga kada luk mora proći kroz zadate tačke, a ne oko poznatog centra.",
"help.sketch.arc3d":"Crta tačan kružni luk u prostoru kroz tri tačke, uz uključenu 3D skicu. Koristite ga za zavoje putanja i vodilica koji izlaze iz ravni skice.",
"help.sketch.auto_constrain":"Dodaje ograničenja koja skica već gotovo ima, npr. horizontalno, paralelno ili podudarno, a zatim je kotira dok ne bude potpuno definisana. Koristite ga da grubo nacrtanu skicu zaključate u jednom koraku.",
"help.sketch.auto_constrain_from_datum":"Radi kao Automatska ograničenja, ali položaje mjeri od referentne tačke koju izaberete umjesto od ishodišta. Koristite ga kada je dio raspoređen od jedne referentne tačke, npr. ugla ili rupe.",
"help.sketch.blend_curve":"Spaja krajeve dviju kriva glatkim splajnom koji je tangentan na obje, ili i kontinuiran po zakrivljenosti ako tako izaberete. Koristite ga da premostite razmak između kriva bez pregiba.",
"help.sketch.break":"Dijeli krivu na dijelove tamo gdje je presijecaju druge krive, ili na tačkama koje postavite na nju. Koristite ga kada dio krive treba vlastito ograničenje ili ga treba zasebno izbrisati.",
"help.sketch.cancel":"Napušta skicu i odbacuje sve što je promijenjeno otkako je napravljena ili otvorena za uređivanje. Pomoću Poništi možete vratiti promjene.",
"help.sketch.centerline":"Prebacuje linije između običnih linija i središnjih linija, osa koje profili izostavljaju. Središnju liniju koristite kao osu za rotaciju, preslikavanje ili ograničenje simetrije.",
"help.sketch.chamfer.distance_angle":"Skošava ugao između dvije linije, zadat udaljenošću duž prve linije i uglom. Koristite ga kada crtež daje skošenje kao dužinu i ugao, npr. 2 mm × 30°.",
"help.sketch.chamfer.equal_distance":"Skošava ugao između dvije linije za istu udaljenost unazad duž obje. Koristite ga za uobičajeno skošenje od 45° na obrisu.",
"help.sketch.chamfer.two_distance":"Skošava ugao između dvije linije, zadat posebnom udaljenošću duž svake linije. Koristite ga za skošenja koja nisu 45°, zadana kao dvije dužine.",
"help.sketch.circle.center":"Crta krug iz njegovog centra i prečnika. Koristite ga za rupe, ispuste i druge okrugle oblike čiji je centar poznat.",
"help.sketch.circle.three_point":"Crta krug kroz tri tačke. Koristite ga kada krug mora proći kroz zadate tačke, npr. postojeće geometrije.",
"help.sketch.circle.three_tangent":"Crta krug koji dodiruje tri elementa: linije, krugove ili lukove. Koristite ga da krug uklopite u prostor između triju kriva, npr. upisani krug trougla.",
"help.sketch.circle.two_point":"Crta krug iz dva kraja njegovog prečnika. Koristite ga kada su poznate tačke na rubu kruga, a ne njegov centar.",
"help.sketch.circle.two_tangent":"Crta krug zadate veličine koji dodiruje dva elementa: linije, krugove ili lukove. Koristite ga za zaobljenje stalnog poluprečnika između dvije krive.",
"help.sketch.conic":"Crta konusnu krivu između dvije krajnje tačke, oblikovanu tjemenom tačkom i vrijednošću rho. Koristite je za glatke prelaze čiju punoću želite podesiti, od ravnog do gotovo oštrog ugla.",
"help.sketch.constrainer":"Primjenjuje ograničenje koje jedna ili dvije izabrane krive već gotovo imaju, npr. horizontalno, paralelno, tangentno ili jednako. Koristite ga da uredite ručno nacrtanu skicu, jedan odnos po jedan.",
"help.sketch.constraint.coincident":"Čini da tačka leži na drugoj tački, krivoj ili osi skice. Koristite ga da zatvorite otvore u profilu ili da tačku postavite na liniju.",
"help.sketch.constraint.collinear":"Čini da dvije linije leže na jednoj pravoj. Koristite ga da poravnate prekinute ivice, npr. obje strane zareza.",
"help.sketch.constraint.concentric":"Daje dva kruga ili luka isti centar. Koristite ga za prstenove, cilindrična upuštenja i osovine s ramenima.",
"help.sketch.constraint.curvature":"Čini da dvije krive koje se sastaju u krajnjoj tački nastave istom zakrivljenošću (G2). Koristite ga tamo gdje tangentni spoj nije dovoljno gladak, npr. na vidljivim površima.",
"help.sketch.constraint.equal":"Izjednačava dužine linija, ili poluprečnike krugova i lukova. Koristite ga da jedna kota upravlja s više istovjetnih oblika.",
"help.sketch.constraint.fix":"Fiksira tačke ili krive tamo gdje jesu, ili ih ponovo oslobađa. Koristite ga za geometriju koja se ne smije pomjerati kada povlačite ili rješavate skicu.",
"help.sketch.constraint.horizontal_vertical":"Čini liniju, ili liniju između dvije tačke, horizontalnom ili vertikalnom, zavisno od toga što je bliže. Koristite ga da obris poravnate s osama skice.",
"help.sketch.constraint.midpoint":"Postavlja tačku na sredinu linije, ili spaja središnje tačke dviju linija. Koristite ga da geometriju centrirate na ivici.",
"help.sketch.constraint.parallel":"Čini dvije linije paralelnima. Koristite ga za stranice koje moraju ostati paralelne kada se promijene druge kote.",
"help.sketch.constraint.perpendicular":"Čini da se dvije linije sastaju pod pravim uglom. Koristite ga za prave uglove između linija koje nisu na osama skice.",
"help.sketch.constraint.polygon":"Čini zatvoreni lanac linija pravilnim poligonom: jednake stranice, a svaki ugao na jednom krugu. Koristite ga da ručno nacrtan poligon učinite pravilnim i takvim ga zadržite.",
"help.sketch.constraint.symmetry":"Čini da dvije tačke ili krive budu međusobno preslikane preko linije ili oko tačke. Koristite ga da profil ostane simetričan kada promijenite jednu stranu.",
"help.sketch.constraint.tangent":"Čini da se dvije krive dodiruju tangentno, npr. linija i luk. Koristite ga za glatke spojeve bez pregiba.",
"help.sketch.construction":"Prebacuje krive između obične geometrije i pomoćne geometrije, koju profili izostavljaju. Pomoćne krive koristite kao pomagala za raspored, reference i kote.",
"help.sketch.construction_line":"Napravite beskonačnu pomoćnu pravu kroz dvije tačke. Koristite je da rasporedite skicu bez razdvajanja profila.",
"help.sketch.construction_line.angle":"Napravite beskonačnu pomoćnu pravu pod uglom od ose X skice. Izaberite tačku i upišite ugao ili izaberite smjer.",
"help.sketch.construction_line.bisector":"Izaberite dvije prave linije skice koje se sijeku, pa jednu od dvije simetrale ugla. Rezultat prati izvorne linije.",
@@ -1412,11 +1580,71 @@
"help.sketch.construction_line.tangent_external":"Izaberite krug ili kružni luk, pa vanjsku tačku i rješenje tangente. Pregledi prikazuju samo dodirne tačke na nacrtanom luku.",
"help.sketch.construction_line.tangent_two":"Izaberite dva kruga ili kružna luka, pa u pregledu izaberite zajedničku tangentu. Dodirne tačke moraju ležati na nacrtanim krivama.",
"help.sketch.construction_line.vertical":"Napravite beskonačnu vertikalnu pomoćnu pravu kroz tačku. Njeno ograničenje vertikalnosti ostaje na snazi pri kasnijim izmjenama.",
"help.sketch.copy":"Kopira izabrane krive i tačke skice, zajedno s ograničenjima i kotama među njima. Zalijepite ih u ovu skicu ili u drugu.",
"help.sketch.create":"Počinje novu 2D skicu na ravni ili na ravnom licu modela. Svako ekstrudiranje, rotiranje i povlačenje počinje skicom.",
"help.sketch.cut":"Kopira izabranu geometriju skice i briše je iz skice, u jednom koraku poništavanja. Zalijepite je drugdje u ovoj skici ili u drugoj.",
"help.sketch.dimension":"Dodaje pogonsku kotu: dužinu, udaljenost, ugao, poluprečnik ili prečnik, zavisno od onoga što izaberete. Upišite vrijednost ili naziv parametra, a skica ih prati.",
"help.sketch.edit":"Otvara postojeću skicu za uređivanje. Operacije izgrađene na njoj se ažuriraju kada završite skicu.",
"help.sketch.ellipse":"Crta elipsu iz njenog centra, kraja velike ose i tačke na maloj strani. Koristite je za ovalne otvore, brijegove i druge izdužene okrugle oblike.",
"help.sketch.equation_curve":"Crta krivu iz formula: x(t) i y(t) ili y = f(x), u zadanom rasponu. Formule mogu koristiti parametre i kriva ih prati: koristite je za sinusoidu, spiralu ili evolventu zupca zupčanika.",
"help.sketch.extend":"Produžava liniju ili luk do najbliže krive na putu, ili izdužuje dvije krive dok se ne sastanu. Koristite ga da zatvorite otvore u profilu nakon odsijecanja ili uređivanja.",
"help.sketch.fillet":"Zaobljuje ugao gdje se dvije linije ili lukovi sastaju lukom zadatog poluprečnika. Više uglova zaobljenih zajedno dijeli jedan poluprečnik.",
"help.sketch.finish":"Napušta skicu i vraća se na model. Njeni zatvoreni profili tada su spremni za Ekstrudiraj, Rotiraj i druge operacije.",
"help.sketch.finish_auto_constrain":"Pokreće Automatska ograničenja na skici, a zatim je završava. Koristite ga da skicu ostavite potpuno definisanu u jednom koraku.",
"help.sketch.fit_curves_to_section":"Siječe mrežno ili puno tijelo ravni skice i uklapa linije i lukove u presjek. Koristite ga da skenirani ili uvezeni dio ponovo izgradite kao uredivu skicu.",
"help.sketch.include_3d":"Unosi ivice modela, vrhove i krive drugih skica u ovu skicu kao povezane reference, spljoštavajući one izvan njene ravni na nju. Koristite ga da gradite na geometriji koja ne leži u ravni skice.",
"help.sketch.infinite":"Prebacuje linije između običnih linija i beskonačnih pomoćnih pravih koje se protežu preko cijelog prikaza. Koristite ih kao reference za raspored koje nikada ne završe prekratko.",
"help.sketch.insert_dxf":"Učitava krive DXF crteža u skicu, skalirane, zakrenute i postavljene gdje zadate. Koristite ga da gradite na 2D crtežu iz drugog programa, npr. na obrisu za rezanje laserom.",
"help.sketch.insert_svg":"Učitava putanje SVG crteža u skicu, skalirane, zakrenute i postavljene gdje zadate. Koristite ga da logotip ili vektorski obris pretvorite u krive koje možete ekstrudirati.",
"help.sketch.inspect":"Otvara izvještaj o otvorenoj skici: koliko je stepeni slobode preostalo i je li potpuno ograničena. Koristite ga da saznate šta se još pomjera prije nego što završite skicu.",
"help.sketch.intersect":"Dodaje krive ili tačke gdje tijela, lica, ivice ili druge skice sijeku ravan skice. Ostaju povezane i prate model kada se promijeni.",
"help.sketch.intersection_curve":"Pravi 3D krive tamo gdje se dva tijela ili lica sastaju, povezane s njima. Koristite ih kao putanje ili vodilice koje prate model.",
"help.sketch.isoparametric_curve":"Pravi 3D krivu u smjeru U ili V lica kroz tačku koju izaberete, povezanu s licem. Koristite je kao putanju ili liniju razdvajanja koja prati površ.",
"help.sketch.line":"Crta povezane linije tačku po tačku, kao otvoreni lanac ili zatvoren obris. To je osnovni alat za većinu profila.",
"help.sketch.line.midpoint":"Crta liniju od njene središnje tačke do jednog kraja, a drugi kraj se preslikava. Koristite je za linije centrirane na tački, npr. simetričnu ivicu.",
"help.sketch.line3d":"Crta povezane prave linije između tačaka u prostoru, uz uključenu 3D skicu. Koristite ga za putanje i okvire koji izlaze iz ravni skice.",
"help.sketch.mirror":"Preslikava krive i tačke skice preko linije ili ose i dodaje ograničenja simetrije. Koristite ga da nacrtate pola simetričnog profila i dovršite ga.",
"help.sketch.move":"Pomjera ili rotira krive i tačke skice, ili njihovu kopiju. Koristite ga da promijenite položaj geometrije uz zadržavanje njenog oblika i ograničenja.",
"help.sketch.offset":"Pravi kopiju lanca kriva na zadatoj udaljenosti, s jedne strane ili s obje. Koristite ga za zidove, obrise i zazore; udaljenost ostaje kota koju možete uređivati.",
"help.sketch.paste":"Lijepi geometriju skice koju ste kopirali ili izrezali u aktivnu skicu. Postavite je na tačku ili je pomjerite za odmak.",
"help.sketch.pattern.circular":"Kopira geometriju skice oko tačke centra, preko punog kruga ili zadatog ugla. Koristite ga za kružne rasporede vijaka, paoke i zupce.",
"help.sketch.pattern.rectangular":"Kopira geometriju skice u redovima i kolonama na zadatim razmacima. Koristite ga za mreže rupa, žlijebova ili otvora za ventilaciju.",
"help.sketch.point":"Postavlja tačku skice. Koristite je kao referencu za kote, ograničenja, centre rupa ili kasnije operacije.",
"help.sketch.point3d":"Postavlja tačku u prostoru, uz uključenu 3D skicu. Koristite je kao referencu za 3D krive i putanje.",
"help.sketch.polygon.circumscribed":"Crta pravilan poligon oko kruga, zadat od centra do sredine stranice. Koristite ga kada je poznata širina ključa, npr. za šestougaonu maticu.",
"help.sketch.polygon.edge":"Crta pravilan poligon iz dva kraja jedne stranice. Koristite ga kada su poznate dužina i položaj stranice.",
"help.sketch.polygon.inscribed":"Crta pravilan poligon unutar kruga, zadat od centra do ugla. Koristite ga kada je poznata mjera preko uglova.",
"help.sketch.project":"Unosi ivice modela, lica, vrhove i krive drugih skica u ovu skicu, projektovane na njenu ravan. Ostaju povezani i prate model kada se promijeni.",
"help.sketch.project_to_surface":"Projektuje krive drugih skica duž normale ove skice na lice, kao povezane 3D krive. Koristite ga da logotip, liniju razdvajanja ili putanju postavite na zakrivljenu površ.",
"help.sketch.rectangle.center":"Crta pravougaonik iz njegovog centra i jednog ugla. Koristite ga za obrise centrirane na tački, npr. na ishodištu.",
"help.sketch.rectangle.rounded":"Crta pravougaonik sa sva četiri ugla zaobljena istim poluprečnikom. Koristite ga za ploče, poklopce i otvore sa zaobljenim uglovima.",
"help.sketch.rectangle.three_point":"Crta pravougaonik iz jedne ivice i tačke na suprotnoj strani. Koristite ga za pravougaonike pod uglom u odnosu na ose skice.",
"help.sketch.rectangle.two_point":"Crta pravougaonik iz dva suprotna ugla. Koristite ga za obrise ploča, blokova i džepova.",
"help.sketch.scale":"Skalira krive i tačke skice faktorom oko bazne tačke. Koristite ga da promijenite veličinu dijela skice bez ponovnog crtanja.",
"help.sketch.slot.arc_center":"Crta lučni žlijeb zadate širine duž luka određenog centrom, početkom i krajem. Koristite ga za žlijebove za podešavanje oko osovine.",
"help.sketch.slot.arc_three_point":"Crta lučni žlijeb zadate širine duž luka kroz tri tačke. Koristite ga kada putanja žlijeba mora proći kroz zadate tačke.",
"help.sketch.slot.center_point":"Crta ravni žlijeb zadate širine od njegovog centra do centra jednog krajnjeg luka. Koristite ga za žlijebove centrirane na tački.",
"help.sketch.slot.center_to_center":"Crta ravni žlijeb zadate širine između centara njegova dva krajnja luka. Koristite ga za žlijebove kotirane od centra do centra, npr. žlijebove za podešavanje vijaka.",
"help.sketch.slot.overall":"Crta ravni žlijeb zadate širine od jednog vanjskog kraja do drugog. Koristite ga kada je bitna ukupna dužina žlijeba.",
"help.sketch.spline.control_point":"Crta kubni splajn oblikovan kontrolnim tačkama kroz koje ne prolazi. Koristite ga za glatke, tečne krive koje oblikujete pomjeranjem tačaka.",
"help.sketch.spline.control_point_5":"Crta splajn petog stepena oblikovan kontrolnim tačkama. Koristite ga tamo gdje se krive moraju spajati glađom zakrivljenošću, npr. na vidljivim dizajnerskim površima.",
"help.sketch.spline.fit_point":"Crta glatki splajn koji prolazi kroz svaku tačku koju postavite, otvoren ili zatvoren. Koristite ga da oblik provučete kroz poznate tačke.",
"help.sketch.spline3d":"Crta glatku krivu u prostoru kroz tačke, uz uključenu 3D skicu. Koristite ga za putanje povlačenja i vođenje kablova koji izlaze iz ravni skice.",
"help.sketch.spun_profile":"Pravi u ravni skice obris koji tijelo opisuje kada se okreće oko ose. Koristite ga da dobijete siluetu tokarenog dijela za rotiranje ili crtež.",
"help.sketch.text":"Upisuje tekst u skicu izabranim fontom, visinom i uglom; njegove riječi mogu pratiti parametre. Ekstrudirajte ga ili ga napravite reljefom za etikete i natpise.",
"help.sketch.transform":"Skalira, okreće i pomjera geometriju skice oko tačke centra u jednom koraku. Koristite ga da istovremeno promijenite položaj i veličinu izbora.",
"help.sketch.trim":"Uklanja dio krive između najbližih presjeka oko mjesta na koje kliknete. Koristite ga da preklapajuće linije očistite u zatvoren profil.",
"help.solid.align":"Pomjera izabrana tijela tako da se tačka, lice ili ravan na njima poklopi s tačkom, licem ili ravni negdje drugdje. Koristite ga da postavite dio uz drugi bez mjerenja odmaka.",
"help.solid.boundary_fill":"Pravi puna tijela od područja zatvorenih preklapajućim alatnim tijelima, popunjavajući samo područja koja izaberete. Koristite ga da oblik izgradite iz prostora koji nekoliko tijela zajedno ograničava.",
"help.solid.bounding_solid":"Pravi kutiju koja obuhvata izabrana tijela, s neobaveznom marginom. Koristite ga da vidite ukupnu veličinu dijela ili kao pripremak iz kojeg se dio obrađuje.",
"help.solid.box":"Pravi kutiju iz dužine, širine i visine, iz tačke ugla ili centriranu na tački. Koristite je za brz blok, privremeni oblik ili tijelo u koje se urezuju operacije.",
"help.solid.chamfer":"Odsijeca izabrane ivice ravnim skošenjem zadate udaljenosti. Koristite ga da ublažite oštre ivice ili olakšate uvođenje zatika ili vijka.",
"help.solid.coil":"Pravi zavojno tijelo, npr. oprugu, iz prečnika, broja zavoja, visine ili koraka i okruglog ili kvadratnog presjeka. Koristite je za opruge, zavojnice i zavojne grebene.",
"help.solid.combine":"Spaja tijela, oduzima ih od ciljnog tijela ili zadržava samo zajedničku zapreminu, a može zadržati i alatna tijela. Koristite ga da spojite dijelove, da jednim oblikom odsiječete drugi ili da pronađete gdje se dva tijela preklapaju.",
"help.solid.cone":"Pravi konus iz kruga osnove i visine, ili zarubljeni konus kada i vrh ima poluprečnik. Koristite ga za suženja, lijevke, konusna upuštenja i šiljke.",
"help.solid.cylinder":"Pravi cilindar iz poluprečnika ili prečnika i visine, postavljen na tačku duž ose. Koristite ga za osovine, zatike, ispuste i okrugle pripremke.",
"help.solid.draft":"Naginje izabrana lica za ugao koji zadate, mjereno od neutralne ravni. Koristite ga na livenim ili brizganim dijelovima kako bi izašli iz kalupa.",
"help.solid.emboss":"Izdiže profile skice, npr. tekst ili logotip, iz lica, ili ih udubljuje u njega. Koristite ga za natpise, etikete i oznake na ravnim ili okruglim licima.",
"help.solid.extrude":"Izvlači profil skice u 3D duž zadate udaljenosti, dodajući ili uklanjajući materijal. Koristite ga da ravni obris pretvorite u blok, ispust ili džep.",
"help.solid.fillet":"Zaobljuje izabrane ivice glatkim kružnim prelazom zadatog poluprečnika. Koristite ga da omekšate oštre ivice radi čvrstoće, udobnosti ili izgleda.",
"help.solid.hole":"Buši okruglu rupu zadatog prečnika na izabranoj tački lica. Koristite je za prolaze vijaka, zatike i druge jednostavne okrugle otvore.",
@@ -1425,20 +1653,60 @@
"help.solid.move":"Pomjera ili rotira izabrana tijela, ili njihovu kopiju, za udaljenost i ugao koje zadate. Koristite ga da premjestite tijelo ili napravite drugo na drugom mjestu.",
"help.solid.offset_face":"Gura izabrana lica unutra ili van za udaljenost koju zadate, a okolna lica ih prate. Koristite ga da podebljate zid, produbite džep ili povisite ispupčenje bez uređivanja skice.",
"help.solid.pattern.circular":"Ponavlja izabrane objekte oko ose, za zadati broj i ukupni ugao. Koristite ga za krugove vijaka, žbice, rebra hladnjaka i zupce.",
"help.solid.pattern.path":"Kopira operacije ili tijela duž putanje skice, prema broju i razmaku. Koristite ga za rupe duž zakrivljene ivice ili dijelove duž vodilice.",
"help.solid.pattern.rectangular":"Ponavlja izabrane objekte u jednom ili dva smjera sa zadatim brojem i razmakom. Koristite ga za redove i mreže rupa, rebara, zatika ili nožica.",
"help.solid.pipe":"Pravi okruglu cijev duž putanje od kriva skice, punu ili šuplju sa zadatom debljinom zida. Koristite je za cijevi, žice, kablove i šine.",
"help.solid.press_pull":"Dodaje ili uklanja materijal dok povlačite lice, ili zaobljava ivice dok ih povlačite. Koristite ga za brze izmjene direktno na modelu.",
"help.solid.remove":"Uklanja izabrana tijela iz dizajna od ove tačke vremenske trake nadalje; raniji koraci ih zadržavaju. Koristite ga da odbacite pomoćno tijelo, npr. alat za rezanje koji vam više ne treba.",
"help.solid.replace_face":"Premješta izabrana ravna lica na ravan ili na paralelno lice, a tijelo raste ili se smanjuje da ga dosegne. Koristite ga da poravnate lice s drugim dijelom ili pomoćnom ravni.",
"help.solid.revolve":"Okreće profil skice oko ose i pravi okruglo tijelo. Koristite ga za vratila, dugmad, posude i svaki dio koji je okrugao oko središnje linije.",
"help.solid.rib":"Dodaje tanak zid duž otvorene krive skice, popunjen do sljedećih lica tijela. Koristite ga da ojačate zidove i uglove, npr. u brizganim ili štampanim dijelovima.",
"help.solid.scale":"Povećava ili smanjuje izabrana tijela za faktor, jednako u svim smjerovima ili posebno po osi. Koristite ga da promijenite veličinu uvezenog oblika ili uračunate skupljanje.",
"help.solid.shell":"Izdubljuje tijelo i ostavlja zidove zadate debljine, a može otvoriti lica koja izaberete. Koristite ga za kutije, poklopce i druge tankozidne dijelove.",
"help.solid.sphere":"Pravi sferu iz poluprečnika ili prečnika oko tačke centra. Koristite je za kugle, ručke i zaobljene krajeve.",
"help.solid.split_body":"Reže tijelo na zasebna tijela ravni, licem drugog tijela ili linijom skice. Koristite ga za dijelove koji se zasebno štampaju, obrađuju ili boje.",
"help.solid.split_face":"Dijeli izabrana lica po ravni, licu drugog tijela ili krivama skice, bez rezanja tijela. Koristite ga da dijelu lica date vlastiti nagib, boju ili odmak.",
"help.solid.sweep":"Povlači profil skice duž putanje i pravi tijelo. Koristite ga za cijevi, šine, ručke i svaki dio konstantnog presjeka koji prati krivu.",
"help.solid.thread":"Dodaje ISO metrički navoj na cilindrično lice, kao kozmetički navoj ili urezan u tijelo. Koristite ga za vijke, navojne rupe i štampane dijelove s navojem.",
"help.solid.torus":"Pravi prsten iz velikog poluprečnika oko njegove ose i malog poluprečnika za okrugli presjek. Koristite ga za O-prstenove, ručke i okrugle perle.",
"help.solid.web":"Dodaje tanak zid duž svake otvorene krive skice, svaki popunjen do sljedećih lica tijela. Koristite ga za mrežu potpornih zidova unutar kućišta i posuda.",
"help.surface.blend":"Pravi površ koja premošćuje ivice dvaju tijela, tangentnu ili kontinuiranu po zakrivljenosti s oba. Koristite je da dvije površi glatko spojite preko razmaka.",
"help.surface.boundary":"Pravi površ koja ispunjava petlju od dvije do četiri krive skice, ili mrežu kriva. Koristite je za slobodne panele određene svojim ivicama.",
"help.surface.extend":"Produžava površ preko njenih ivica, za neku udaljenost ili do ravni ili lica. Koristite ga da se površi preklope prije nego što ih odsiječete ili sašijete.",
"help.surface.extrude":"Izvlači krive ili profile skice na zadatu udaljenost u površ, samo zidove, bez poklopaca. Koristite ga za tanke zidove i za alate za rezanje ili razdvajanje.",
"help.surface.fair":"Izglađuje unutrašnjost slobodnih lica dok njihove ivice ostaju na mjestu. Koristite ga da izravnate izbočine i valovite refleksije u površi.",
"help.surface.loft":"Pravi površ koja redom prolazi kroz dva ili više presjeka, bez poklopaca. Koristite je za ljuske i prelaze između različitih oblika.",
"help.surface.match":"Ponovo gradi ivicu površi tako da se sastaje s ivicom drugog tijela, uz podudarnu tangentu ili zakrivljenost. Koristite ga da glatko zatvorite šav između dvije površi.",
"help.surface.offset":"Pravi kopiju lica na udaljenosti duž njihovih normala, kao novo tijelo površi. Koristite ga za omotače, zazore ili drugu stranu zida.",
"help.surface.patch":"Ispunjava područje skice ili zatvorenu petlju ivica licem, ravnim ili glatko zakrivljenim. Koristite ga da zatvorite rupe u tijelu površi.",
"help.surface.reverse_normal":"Okreće lica tijela površi, pa njihova vanjska strana gleda na drugu stranu. Koristite ga prije podebljanja ili šivenja kada lica gledaju prema unutra.",
"help.surface.revolve":"Okreće krive ili profile skice oko ose u površ, bez poklopaca. Koristite ga za okrugle ljuske poput abažura, zdjela i mlaznica.",
"help.surface.ruled":"Pravi traku pravih linija iz lanca ivica, duž normale lica, tangente ili pod uglom. Koristite ga za zidove s nagibom, odvodne površi i površi razdvajanja.",
"help.surface.stitch":"Šije tijela površi zajedno duž njihovih zajedničkih ivica, u puno tijelo kada se zatvore. Koristite ga da skup površi pretvorite u jedno tijelo.",
"help.surface.sweep":"Pomjera krive ili profile skice duž putanje u površ, bez poklopaca. Koristite ga za žljebove, lajsne i druge tanke oblike koji prate putanju.",
"help.surface.thicken":"Daje tijelu površi debljinu i pretvara ga u puno tijelo. Koristite ga da od površi napravite dijelove pogodne za štampu ili obradu.",
"help.surface.trim":"Siječe površ ravni, drugom površi ili krivama skice i zadržava stranu koju izaberete. Koristite ga da površi oblikujete prije šivenja.",
"help.surface.unstitch":"Razdvaja lica tijela u zasebna tijela površi; puno tijelo se raspada na površi. Koristite ga da preradite pojedinačna lica tijela.",
"help.surface.untrim":"Uklanja rupe iz lica, ili vraća njegovu vanjsku granicu na prirodne granice površi. Koristite ga da nakon odsijecanja vratite cijelu površ.",
"help.third_party":"Licence trećih strana",
"help.timeline.compute_all":"Ponovo gradi svaku operaciju na vremenskoj traci od početka. Koristite ga da osvježite model i vidite koje operacije ne uspijevaju.",
"help.timeline.delete":"Briše izabrane operacije s vremenske trake; brisanje skice briše i operacije napravljene iz nje. Koristite ga da uklonite korak koji više ne želite.",
"help.timeline.dependents":"Navodi operacije koje bi bile izbrisane zajedno s nekom operacijom i one koje bi bez nje otkazale. Koristite ga prije brisanja ili mijenjanja operacije.",
"help.timeline.play":"Reprodukuje preostale operacije jednu po jednu, s pauzom od pola sekunde nakon svake ponovne izgradnje. Pokrenite ovu komandu ponovo ili pritisnite Escape da zaustavite; Idi na kraj skače odmah.",
"help.view.apply":"Okreće prikaz u standardni smjer, npr. sprijeda, odozgo ili izometrijski, ili u sačuvani imenovani prikaz. Koristite ga da model posmatrate iz utvrđenog ugla.",
"help.view.delete":"Briše sačuvani imenovani prikaz. Model se ne mijenja.",
"help.view.fit":"Zumira i pomjera prikaz tako da cijeli model, ili izbor, ispuni prikaz. Koristite ga kada model nestane iz vidokruga.",
"help.view.grid":"Prikazuje ili sakriva mrežu u prozoru prikaza. Koristite je kao vodič za veličinu i orijentaciju tokom modeliranja.",
"help.view.ground_shadow":"Prikazuje ili sakriva sjenu modela na podlozi. Koristite je da lakše procijenite visinu i položaj.",
"help.view.home":"Vraća prikaz na početni smjer i uklapa model. Koristite ga da se brzo vratite na poznat prikaz.",
"help.view.list":"Navodi imenovane prikaze sačuvane u dizajnu. Koristite ga da pronađete prikaz koji ste ranije sačuvali.",
"help.view.navigate":"Okreće, pomjera ili zumira prikaz u koracima, npr. četvrtinu okreta ulijevo. Koristite ga da kameru pomjerate precizno umjesto povlačenjem.",
"help.view.navigation_bar":"Prikazuje ili sakriva navigacijsku traku na dnu prozora prikaza. Sakrijte je za više prostora, prikažite je da alatima prikaza pristupate mišem.",
"help.view.rename":"Daje sačuvanom imenovanom prikazu novi naziv. Sam prikaz ostaje isti.",
"help.view.save":"Čuva trenutni položaj kamere kao imenovani prikaz u dizajnu. Koristite ga da se kasnije vratite na isti ugao, npr. za snimke ekrana.",
"help.view.spin":"Neprekidno orbitira prikaz oko modela do sljedećeg klika ili tipke. Koristite ga da model predstavite sa svih strana.",
"help.view.tool":"Zaključava alat kamere, orbitiranje, pomjeranje ili zumiranje, tako da povlačenje lijevim dugmetom miša pomjera prikaz dok ga ne isključite. Koristite ga na touchpadu ili bez srednjeg dugmeta miša.",
"help.view.visual_style":"Mijenja način crtanja modela: osjenčeno sa ili bez ivica, žičani model ili sa skrivenim ivicama. Koristite žičani model da vidite unutra, a osjenčeno za čist izgled.",
"nav.maya.help":"Alt+lijevo povlačenje orbitira, Alt+srednje pomjera, Alt+desno zumira; srednje povlačenje također pomjera",
"nav.nx.help":"Povlačenje srednjim dugmetom orbitira, Shift+srednje pomjera (u NX-u srednje + desno), Ctrl+srednje zumira (u NX-u srednje + lijevo); povlačenje desnim dugmetom ne dira kameru",
"nav.openscad.help":"Povlačenje lijevim dugmetom po praznom prostoru orbitira, Shift+povlačenje lijevim bira okvirom, povlačenje geometrije skice je uređuje; povlačenje desnim ili srednjim dugmetom pomjera, Shift+desno ili Shift+srednje zumira",
"nav.perspective.sketch":"Uređivanje skice koristi ortografski prikaz. Završite skicu da prebacite na perspektivu.",
"nav.right_drag_orbits.help":"Isključeno: povlačenje desnim dugmetom ne dira kameru, a desno dugme samo otvara kontekstni meni. Izbor mapiranja miša SolidWorks to isključuje.",
@@ -1767,6 +2040,11 @@
"not a move":"nije pomjeranje",
"not a number":"nije broj",
"open a sketch first":"prvo otvorite skicu",
"parameters.apply_live":"Primijeni svaku promjenu kad napustite njeno polje",
"parameters.apply_live_tip":"Isključeno: promjene čekaju na Primijeni ili U redu, a zatim se dizajn jednom ponovo gradi za sve njih. Otkaži ili Escape ih odbacuje.",
"parameters.held":"Promjene na čekanju za Primijeni: {count}",
"parameters.held_hint":"Uređujte izraze i jedinice. Promjene čekaju na Primijeni ili U redu.",
"parameters.held_one":"1 promjena na čekanju za Primijeni",
"parts.automatic_name":"automatski",
"parts.dimension.across_flats":"Širina ključa",
"parts.dimension.bore":"Provrt",
@@ -1789,6 +2067,8 @@
"parts.family.set_screw":"Bezglavi vijak s imbusom, ravni vrh",
"parts.family.socket_head_cap_screw":"Vijak s cilindričnom glavom i imbusom",
"parts.family.washer":"Obična podloška",
"parts.holes":"Rupe (neobavezno)",
"parts.placement_hint":"izaberite jednu ili više rupa da u svaku postavite dio, ili ga U redu postavlja u ishodište",
"pattern.alignment_2":"Poravnanje 2",
"pattern.alignment_hint":"Broj uključuje original. Centar ravnomjerno raspoređuje kopije; Obrni bira dodatnu stranu za parne ukupne brojeve.",
"pattern.direction_1":"Smjer 1",
@@ -1862,6 +2142,8 @@
"prefs.ctrl_cmd":"Ctrl / Cmd",
"prefs.curved_surfaces":"Zakrivljene površi",
"prefs.curves":"Zakrivljene površi",
"prefs.dark_parts_shading":"Zadrži oblik tamnih dijelova",
"prefs.dark_parts_shading_help":"Sjenči prikaz u linearnom svjetlu s mekim dopunskim svjetlom neba, tako da tamna lica zadrže gradijent umjesto da pocrne",
"prefs.dead_zone_note":"Šrafirana traka je mrtva zona: kretanje unutar nje se zanemaruje.",
"prefs.extra_navigation":"Ctrl + povlačenje lijevim dugmetom po praznom prostoru orbitira; držite razmaknicu za pomjeranje.",
"prefs.extrude_view_isometric":"Okreni prikaz u izometrijski kada se otvori Ekstrudiraj",
"prefs.extrude_view_return":"Vrati se na prethodni prikaz kada se Ekstrudiraj zatvori",
"prefs.follows_os":"Prati operativni sistem",
"prefs.font":"Font",
"prefs.font_fallback":"Znakovi koji nedostaju izabranom fontu prikazuju se ugrađenim fontom, tako da nijedna oznaka ne prikazuje prazan kvadrat.",
@@ -1891,6 +2175,7 @@
"prefs.graphics_card_auto":"Automatski",
"prefs.graphics_card_missing":"Sačuvana grafička kartica nije dostupna; koristi se Automatski.",
"prefs.graphics_card_restart":"Stupa na snagu nakon ponovnog pokretanja SolidCrafta. WGPU_ADAPTER_NAME ima prednost nad ovim izborom.",
"prefs.graphics_card_unused":"Sačuvana grafička kartica nije korištena za ovaj prozor; kartica koja se koristi prikazana je u Pomoć › O programu i u statusnoj traci. Pokušajte s opcijom Automatski ili postavite WGPU_ADAPTER_NAME na jedinstveni dio naziva kartice.",
"prefs.graphics_note":"Žrtvujte brzinu za glatkoću. Svaki izbor pokazuje svoj učinak na primjeru.",
"prefs.graphics_presets_note":"Unaprijed postavljene vrijednosti podešavaju sve izbore ispod odjednom.",
"prefs.hide_constraint_glyphs_zoomed_out":"Sakrij simbole ograničenja kada je prikaz umanjen",
@@ -1905,6 +2190,8 @@
"prefs.history_sketches_note":"Kada je Skice postavljeno na Ispod svoje operacije, vremenska traka lijevo prikazuje svaku skicu jedan nivo uvučeno, ispod prve operacije napravljene iz nje, kad god je dovoljno široka za nazive. Vremenska traka na dnu uvijek zadržava redoslijed nastanka.",
"prefs.history_sketches_under_feature":"Ispod svoje operacije",
"prefs.hold_stop_snapping":"Držite da isključite privlačenje",
"prefs.home_fit_size":"Veličina za Početni prikaz i Uklopi",
"prefs.home_fit_size_note":"Koliki dio prikaza model ispunjava kada ga uokviri Početni prikaz, Uklopi, otvaranje dizajna ili promjena prikaza u navigatoru, bez obzira na to je li postavka ispod uključena. 100 %: ispunjava prikaz između panela, kompasa i navigacijske trake.",
"prefs.icons_only":"Samo ikone",
"prefs.imported_file":"Uvezena datoteka",
"prefs.in_browser":"U stablu modela",
@@ -1913,13 +2200,20 @@
"prefs.interface_language":"Jezik interfejsa",
"prefs.interface_note":"Kako SolidCraft izgleda i gdje su njegovi dijelovi.",
"prefs.interval_minutes":"{n} min",
"prefs.invert_navigator_arrows":"Obrni strelice za rotaciju kocke prikaza",
"prefs.invert_navigator_arrows_note":"Strelice oko kocke orbitiraju kameru u smjeru u kojem pokazuju, kao u programima Fusion i Inventor: strelica s lijeve strane pokazuje udesno i zakreće kameru udesno. Isključeno: strelica okreće kocku prema strani na kojoj se nalazi, pa lijeva strelica zakreće kameru ulijevo. Postavka ne utiče na zakrivljene strelice za valjanje.",
"prefs.keep_work_on_tab_switch":"Zadrži dijaloge i alate otvorenima pri prebacivanju između dizajna",
"prefs.keep_work_on_tab_switch_note":"Svaka kartica dizajna zadržava svoj otvoreni dijalog ili alat, s onim što ste u njemu izabrali i upisali, te svoju karticu trake s alatima. Kada se vratite na dizajn, ponovo su tu. Isključeno: prebacivanje između dizajna otkazuje ih i prikazuje karticu Model.",
"prefs.labels":"Oznake",
"prefs.language_system":"Sistem",
"prefs.layout":"Raspored",
"prefs.layout_note":"Kompaktno pričvršćuje panele uz ivice prozora. Prozirnost stabla modela dostupna je u opciji Plutajuće. Stranu Asistenta promijenite na stranici Asistent.",
"prefs.left":"Lijevo",
"prefs.left_click":"Lijevi klik",
"prefs.line_drag_draws_one":"Pritisak i povlačenje crta jednu liniju",
"prefs.line_drag_draws_one_note":"U alatu Linija pritisak, povlačenje i puštanje crta jednu liniju od mjesta pritiska do mjesta puštanja i tu se završava. Klikovi i dalje crtaju lanac. Isključeno: povlačenje postavlja tačku tamo gdje se pusti, kao i klik.",
"prefs.line_hover_tangent_arc":"Zadržite pokazivač na posljednjoj tački linije da pređete na tangentni luk",
"prefs.line_hover_tangent_arc_note":"U alatu Linija, nakon što je nacrtan segment, odmaknite pokazivač od posljednje tačke lanca, vratite ga na nju i držite ga mirno: sljedeći klik završava tangentni luk, a isti pokret vraća na linije. Isključeno: zadržavanje na toj tački ne radi ništa.",
"prefs.linked_designs":"Povezani dizajni",
"prefs.live_input":"Ulaz uživo",
"prefs.live_preview":"Pregled uživo",
@@ -1943,6 +2237,8 @@
"prefs.mouse_mapping":"Mapiranje miša",
"prefs.navigation":"Navigacija",
"prefs.navigation_note":"Kako miš, trackpad i 3D miš pomjeraju prikaz.",
"prefs.navigator_fit":"Uklopi model nakon promjene prikaza u navigatoru",
"prefs.navigator_fit_note":"Lice, ugao ili strelica kocke prikaza, odnosno osa alata za orijentaciju, također usmjerava pogled na sredinu modela s jedne udaljenosti na kojoj se uklapa iz svakog smjera (njegova granična sfera). Početni prikaz koristi isti zum i centar dok je ova opcija uključena, pa se prikazi koje izaberete poslije njega samo okreću. Isključeno: prikaz se okreće na mjestu i zadržava svoj cilj i zum.",
"prefs.network_host_remove":"Ukloni",
"prefs.network_locations":"Dozvoli mrežne lokacije u dizajnima",
"prefs.network_locations_note":"Isključeno: povezane datoteke dizajna na drugom računaru (\\\\server\\share) otvaraju se samo sa servera navedenih ovdje ili nakon što ga dozvolite kada se to zatraži.",
"prefs.origin_plane_names_note":"Nazivi prikazani u stablu modela, dijalozima i listama. {top} je XY, {front} je XZ, a {right} je YZ, sa Z prema gore. Komande, skripte i sačuvani dizajni zadržavaju XY, XZ i YZ.",
"prefs.parameter_list_rows_tip":"Strelica prema dolje u praznom polju vrijednosti navodi parametre, favorite prvo, do ovog broja. Manji broj održava popis laganim u velikom dizajnu.",
"prefs.persistent_ribbon_pressed":"Istakni aktivne komande na traci",
"prefs.persistent_ribbon_pressed_help":"Ističe komande na traci dok su njihovi efekti uključeni. Isključite da biste zadržali prethodni neutralni izgled i pomoć za komande.",
"prefs.perspective_fov":"Vidno polje",
@@ -1984,9 +2282,13 @@
"prefs.quality_fastest":"najbrže",
"prefs.quality_slowest":"najsporije",
"prefs.quality_smoother":"glađe",
"prefs.quick_measure":"Brzo mjerenje u uglu prikaza",
"prefs.quick_measure_note":"Veličina izbora u donjem desnom uglu prikaza: dužina ivice, ili Ø i R za okruglu, površina lica, položaj tačke, udaljenost i ugao dviju stavki, ukupna vrijednost više ivica ili lica. Klik je kopira.",
"prefs.render_previous_geometry_budget":"Koristi prethodni budžet geometrije za pregled renderovanja",
"prefs.render_previous_geometry_budget_help":"Vraća prethodno fiksno ograničenje geometrije (512 MiB na 64-bitnim desktop računarima, 128 MiB drugdje) umjesto budžeta prema uređaju.",
"prefs.reports_saved":"Sačuvano: {n}",
"prefs.ribbon_click_ends_tool":"Klik na dugme aktivnog alata završava ga",
"prefs.ribbon_click_ends_tool_note":"Klik na istaknuto dugme na traci alata za skiciranje koji je u upotrebi završava taj alat, pa klikovi u prikazu ponovo služe za biranje. Isključeno: klik ponovo pokreće alat.",
"prefs.ribbon_reveal":"Prikaži rezultate pretrage na traci",
"prefs.ribbon_reveal_note":"Zadržavanje pokazivača iznad rezultata u Pretraži komande pokazuje gdje se komanda nalazi na traci: njenu karticu, njeno dugme ili njen red u padajućem meniju panela. Komanda pokrenuta iz pretrage tamo trepće, a pokrenuta komanda iz padajućeg menija označava svoj panel.",
"prefs.right_click":"Desni klik",
@@ -2016,6 +2318,8 @@
"prefs.sketch_exit_view.previous":"Vrati se na prethodni prikaz",
"prefs.sketch_exit_view.unless_rotated":"Vrati se osim ako je rotirano",
"prefs.sketch_exit_view_note":"Kuda prikaz ide nakon Završi skicu, Otkaži ili dvostrukog Esc.",
"prefs.sketch_face_activates_part":"Skiciranje na licu dijela čini taj dio aktivnim",
"prefs.sketch_face_activates_part_note":"Skica započeta na licu tijela druge komponente prvo aktivira tu komponentu, pa skica pripada njoj i u stablu modela ostaje uz taj dio. Taj dio nakon toga ostaje aktivan. Isključeno: skica pripada aktivnoj komponenti.",
"prefs.sketch_open_look_at":"Okreni kameru prema skici kad se otvori",
"prefs.sketch_open_look_at_note":"Isključeno: kad napravite ili uredite skicu, prikaz ostaje onakav kakav jest. Pogledaj okreće prikaz prema skici kad to želite.",
"prefs.sketch_recent_snap":"Automatski privlači na nedavne centre i središnje tačke",
@@ -2029,6 +2333,8 @@
"prefs.sketch_tab_always_note":"Kartica Skica ostaje na traci, odmah iza Modela, dok nijedna skica nije otvorena. Njeni alati za crtanje tada pokreću skicu na izabranoj ravni ili licu, ili na ravni koju sljedeću izaberete, s alatom spremnim u njoj.",
"prefs.sketch_tracking_guides":"Pomoćne linije poravnanja centra i središnje tačke",
"prefs.sketch_tracking_guides_note":"Zadržite pokazivač iznad centra kruga ili središnje tačke prave ivice, pa se pomjerite vodoravno ili okomito da se prikaže privremena tačkasta pomoćna linija.",
"prefs.sketch_tracking_points":"Pomoćne linije poravnanja iz krajnjih tačaka i uglova tokom crtanja",
"prefs.sketch_tracking_points_note":"Dok alat za crtanje čeka tačku, prelazak mišem preko kraja linije ili luka, ugla pravougaonika ili slobodne tačke prikazuje istu privremenu tačkastu pomoćnu liniju kao centar ili središnja tačka. Isključeno: samo centri i središnje tačke.",
"prefs.sketching":"Skiciranje",
"prefs.snap_drawing_note":"Tokom crtanja ili povlačenja tačke skice.",
"prefs.source":"Izvor",
@@ -2045,6 +2351,24 @@
"prefs.status_error":"Greška",
"prefs.status_selected":"Izabrano",
"prefs.status_warning":"Upozorenje",
"prefs.structure.appearance":"Izgled",
"prefs.structure.appearance_note":"Boje, tekst i pristupačnost.",
"prefs.structure.in_profile":"U profilu",
"prefs.structure.layout":"Raspored",
"prefs.structure.layout_note":"Gdje se nalaze dijelovi prozora.",
"prefs.structure.look":"Vizuelno",
"prefs.structure.measure_pointer":"Mjerenje i pokazivač",
"prefs.structure.mouse3d":"3D miš",
"prefs.structure.mouse3d_note":"SpaceMouse i SpaceNavigator.",
"prefs.structure.navigation_note":"Miš i trackpad. 3D miš ima vlastitu stranicu.",
"prefs.structure.profile":"Profil",
"prefs.structure.profile_edited":"Promijenjeno otkako je sačuvano",
"prefs.structure.profile_hover":"Sačuvano u profilima postavki",
"prefs.structure.scale_percent":"{percent}%",
"prefs.structure.sketch":"Skica",
"prefs.structure.tools":"Alati",
"prefs.structure.tools_note":"Kako se ponašaju alati za modeliranje.",
"prefs.structure.work":"Rad",
"prefs.supersampling_brief":"Iscrtava prikaz većim i smanjuje ga filtriranjem: vrlo oštro i zahtjevnije.",
"prefs.tab_accent_note":"Naglasna boja prati aktivnu karticu",
"prefs.theme_file":"datoteka teme",
@@ -2056,6 +2380,16 @@
"prefs.theme_follow_off":"Isključeno",
"prefs.theme_follow_stop":"Prestani pratiti",
"prefs.theme_import_hint":"Kliknite da izaberete datoteku teme, ispustite je ovdje ili pritisnite Ctrl+V (Cmd+V na Macu) kada je tema kopirana",
"prefs.theme_option_opacity":"Neprozirnost",
"prefs.theme_option_opacity_help":"Podesite neprozirnost plutajućih panela. Donja granica čitljivosti štiti tekst preko boja prozora prikaza.",
"prefs.theme_option_tab_colours":"Boje kartica",
"prefs.theme_option_tab_colours_help":"Koristi boje panela i prozora prikaza ove teme za svaku karticu trake.",
"prefs.theme_option_tab_fade_ms_help":"Boje panela i prozora prikaza postepeno se mijenjaju pri prelasku na drugu karticu. Nula mijenja odmah.",
"prefs.theme_options_badge":"Opcije",
"prefs.theme_options_more":"Više · {count}",
"prefs.theme_options_reset":"Resetuj",
"prefs.theme_options_unavailable":"Nedostupno na ovom uređaju",
"prefs.theme_paste":"Zalijepi temu",
"prefs.theme_paste_none":"Međuspremnik ne sadrži SolidCraft temu",
"prefs.timeline_half_hour":"−30 min",
@@ -2077,6 +2411,8 @@
"prefs.under_cursor":"Ispod pokazivača",
"prefs.units_precision":"Jedinice i preciznost",
"prefs.updates":"Ažuriranja",
"prefs.value_boxes_in_view":"Prikaži vrijednosti pored njihovih ručica u prikazu",
"prefs.value_boxes_in_view_tip":"Vrijednost komande (Udaljenost, Poluprečnik…) u polju pored njene ručice, preko modela. Isključeno: upisujete je u prozoru komande, koji preuzima tastaturu nakon izbora, i ništa ne prekriva model.",
"prefs.view":"Ponašanje prikaza",
"prefs.view_confirm_corner":"U redu i Otkaži u uglu prikaza",
"prefs.view_confirm_corner_note":"Dok je otvoren dijalog ili skica, kvačica i krstić gore desno u prikazu rade isto što i dugmad U redu i Otkaži u dijalogu, odnosno završavaju i otkazuju skicu. Navigator prikaza pomjera se ispod njih.",
"prefs.viewport_section_status":"Prikaži status presjeka u prozoru prikaza",
"prefs.viewport_section_status_help":"Prikazuje postavku presjeka u prozoru prikaza. Escape i aktivno dugme na traci je isključuju. Isključite da zadržite prethodne kontrole presjeka.",
"prefs.viewport_status_details_help":"Uređujte postavke aktivne analize i presjeka u standardnim karticama s detaljima. Isključite da vratite legende analize samo za čitanje i dijalog Presjek.",
"prefs.viewport_status_summary_help":"Sažima tri ili više stavki statusa prozora prikaza u jednu sažetu oznaku. Isključite da svaka stavka ostane u punom redu.",
"prefs.wheel":"Točkić",
"prefs.wheel_trackpad":"Točkić i trackpad",
"prefs.workspace":"Radni prostor",
@@ -2964,7 +3306,9 @@
"render.output_ready":"Spremno za renderovanje",
"render.output_run_check":"Pokreni provjeru",
"render.output_size_limit":"{method}: do {dimension} px po strani i {pixels} piksela. Najveća veličina koja staje: {width} × {height}.",
"render.output_size_method_profile":"Za renderovanje {width} × {height} izaberite {method} s CPU profilom resursa {profile} ili manju veličinu.",
"render.output_size_ok":"Veličina u redu · {width} × {height} px",
"render.output_size_profile":"Za renderovanje {width} × {height} izaberite CPU profil resursa {profile} ili manju veličinu.",
"render.output_swap_orientation":"Zamijeni širinu i visinu",
"render.output_tools_inspector":"Veličinu i format uredite u inspektoru Izlaz.",
"render.size_presets_pending":"Stiže s uređivačem izlaza",
"render.size_preview":"Pregled",
@@ -3464,6 +3809,24 @@
"sheet.flange_type_contour":"Kontura",
"sheet.flange_type_edge":"Ivica",
"sheet.no_body":"nema limenog tijela: napravite ga pomoću Prirubnica > Osnova ili pretvorite ploču u lim pomoću Pretvori u lim (izaberite njeno veliko ravno lice)",
"sheet.personal_rules.delete_prompt":"Izbrisati ovo lično pravilo? Pravila već u dizajnima ostaju nepromijenjena.",
"sheet.personal_rules.full":"Lična biblioteka već sadrži 64 pravila.",
"sheet.personal_rules.invalid_name":"Unesite kratak naziv bez prijeloma reda ili kontrolnih znakova.",
"sheet.personal_rules.invalid_values":"Dopunite vrijednosti pravila: svaka se mora izračunati u ovom dizajnu, s pozitivnom debljinom i K-faktorom od 0 do 1.",
"sheet.personal_rules.missing":"Izabrano lično pravilo više nije dostupno.",
"sheet.personal_rules.name":"Naziv pravila",
"sheet.personal_rules.name_exists":"Lično pravilo s ovim nazivom već postoji. Koristite drugi naziv.",
"sketch_text.no_bold":"Ugrađeni font nema podebljanu varijantu: izaberite instalirani font",
"sketch_text.on_path":"Tekst prati svoju putanju: kriva ga postavlja",
"sketch_text.path_clear":"Skini tekst s njegove krive",
"sketch_text.path_hint":"Kriva skice koju tekst prati: kliknite ovdje, a zatim krivu",
@@ -3533,10 +3898,7 @@
"the two origins are on the same component":"oba ishodišta su na istoj komponenti",
"thread.automatic_size":"Automatska veličina",
"thread.designation":"Oznaka",
"thread.direction":"Smjer navoja",
"thread.iso_metric":"ISO metrički",
"thread.left_hand":"Lijevi",
"thread.right_hand":"Desni",
"thread.select_size":"Izaberite veličinu",
"timeline.delete_after_marker_one":"Izbriši 1 operaciju nakon oznake vraćanja",
"timeline.delete_after_marker_other":"Izbriši operacije nakon oznake vraćanja: {count}",
@@ -3640,6 +4002,8 @@
"ui.3d_mouse_section":"3D miš",
"ui.3d_mouse_show_in_view":"Prikaži 3D miš u 3D prikazu",
"ui.3d_mouse_show_in_view_tip":"Slika vašeg 3D miša u donjem lijevom uglu, koja se kreće dok ga pomjerate.",
"ui.3d_mouse_sketch_orbit":"Okreći skice 3D mišem",
"ui.3d_mouse_sketch_orbit_tip":"3D miš okreće prikaz i dok je skica otvorena i gledana pod pravim uglom, kao što to može i miš. Isključeno: pomjera i zumira skicu dok ne nagnete prikaz.",
"ui.3d_mouse_skip":"Moj uređaj ovo ne može",
"ui.3d_mouse_skip_tip":"Preskače ovo kretanje u oba smjera, a kalibracija ga izostavlja.",
"ui.3d_mouse_speed":"Brzina 3D miša",
@@ -3708,6 +4072,7 @@
"ui.agent_chat_auth_terminal":"Pokrenite ovo u terminalu, a zatim pritisnite Poveži ponovo:",
"ui.agent_chat_auth_title":"Prijavi se kod agenta",
"ui.agent_chat_cancel":"Otkaži",
"ui.agent_chat_cannot_start":"Instalirano, ali se ne pokreće: {error}",
"ui.agent_chat_changes":"Promjene: {n}, jedan korak poništavanja",
"ui.agent_chat_queued_stopped":"U redu čekanja (zaustavljeno, nije poslano)",
"ui.agent_chat_refresh":"Osvježi",
"ui.agent_chat_refused":"Nije dozvoljeno agentu: {reason}",
"ui.agent_chat_reinstall":"{agent} je instaliran ({program}), ali se nije pokrenuo kada ga je SolidCraft provjerio: {error}\nNjegova instalacija možda nije potpuna ili je napravljena za drugu vrstu računara. Instalirajte ga ponovo naredbom `{install}`, provjerite da li u terminalu ispisuje svoju verziju, a zatim pritisnite Osvježi.",
"ui.agent_chat_remove":"Ukloni iz reda",
"ui.agent_chat_remove_file":"Skini s ove poruke",
"ui.agent_chat_remove_imported":"Skini s ove poruke; dio ostaje u dizajnu (Poništi ga uklanja)",
"ui.agent_chat_reply_cut_off":"Odgovor je dostigao ograničenje dužine prije nego što je završen, pa može biti nepotpun. Zamolite agenta da nastavi ili da da kraći odgovor.",
"ui.agent_chat_reply_declined":"Model je odbio odgovoriti na ovu poruku.",
"ui.agent_chat_retry":"Pokušaj ponovo",
"ui.agent_chat_right":"Desno",
"ui.agent_chat_save":"Sačuvaj",
@@ -3861,12 +4229,17 @@
"ui.ai_copy_suffix":"kopiraj",
"ui.ai_custom_url":"Prilagođeni URL",
"ui.ai_default":"Podrazumijevano",
"ui.ai_edit":"Uredi",
"ui.ai_edit_agent_title":"Uredi agenta",
"ui.ai_edit_gone":"Ovaj agent je uklonjen, pa nema šta da se sačuva.",
"ui.ai_edit_tip":"Promijenite naziv, komandu ili krajnju tačku ovog agenta. Sačuvani ključ ostaje skriven.",
"ui.ai_http_busy":"krajnja tačka je zauzeta ili je preko ograničenja; pokušajte ponovo kasnije",
"ui.ai_http_key":"krajnja tačka je odbila ključ: provjerite ga u Postavke > AI",
"ui.ai_http_not_found":"nema takve krajnje tačke ili modela: provjerite osnovni URL i naziv modela",
"ui.ai_http_too_large":"razgovor je prevelik za ovu krajnju tačku; započnite novi razgovor",
"ui.ai_key":"API ključ",
"ui.ai_key_hint":"neobavezno; čuva se u sistemskom privjesku ključeva",
"ui.ai_key_keep_hint":"ostavite prazno da zadržite sačuvani ključ",
"ui.ai_key_needs_https":"Ključ se šalje samo preko HTTPS-a ili na ovaj računar.",
"ui.ai_key_note":"Čuva se u sistemskom privjesku ključeva, nikad u postavkama SolidCrafta. Za lokalni server ostavite prazno.",
"ui.ai_keychain_error":"Sistemski privjesak ključeva je odbio: {error}",
@@ -3893,11 +4266,15 @@
"ui.ai_permissions":"Dozvole",
"ui.ai_preset":"Unaprijed postavljeno",
"ui.ai_protocol":"Protokol",
"ui.ai_reasoning_effort":"Nivo zaključivanja",
"ui.ai_reasoning_effort_field_hint":"prazno = podrazumijevana vrijednost pružaoca",
"ui.ai_reasoning_effort_hint":"Neobavezno. Šalje se krajnjoj tački kao `reasoning_effort`; prihvaćene vrijednosti razlikuju se od pružaoca do pružaoca (na primjer `low`, `high` ili `max`). SolidCraft nikad ne mijenja vrijednost koju ovdje postavite. Ostavite prazno da se ništa ne šalje i da se zadrži podrazumijevana vrijednost pružaoca.",
"ui.ai_remove":"Ukloni",
"ui.ai_request_timed_out":"Model je trajao duže od {seconds} s. Vremensko ograničenje zahtjeva za ovu krajnju tačku možete povećati u Postavke › Asistent.",
"ui.ai_request_timeout_hint":"Koliko dugo jedan zahtjev modelu na ovoj krajnjoj tački smije trajati, od 30 s do jednog sata. Povećajte za spori lokalni model.",
"ui.ai_reset":"Resetuj",
"ui.ai_save":"Sačuvaj",
"ui.ai_settings":"AI postavke…",
"ui.ai_show_features":"Prikaži AI funkcije",
"ui.ai_show_features_note":"Razgovor s agentom: panel u kojem agent za kodiranje koji već koristite ili krajnja tačka modela koju izaberete radi na otvorenom dizajnu. Isključeno: nema AI dugmeta, prečice, stavke menija ni panela, i ništa se ne traži niti pokreće.",
"ui.edit_sketch_empty":"Nema skica za uređivanje",
"ui.ellipse":"Elipsa",
"ui.emboss_wrap_note":"Ortogonalni linijski profili koji tangiraju jedan podržani cilindar obavijaju se automatski. Izaberite zid da izaberete cilj.",
"ui.end_radius":"Krajnji poluprečnik",
@@ -4125,12 +4538,15 @@
"ui.equation_explicit":"Eksplicitno",
"ui.equation_form":"Oblik",
"ui.equation_note":"Varijabla je običan broj: sin(t) je uzima u radijanima. Rezultat bez jedinice je u jedinici dizajna.",
"ui.equation_note_range":"Varijabla je dužina, kao i njen raspon: kombinujte je s parametrima dužine, a za sin() je podijelite dužinom. Rezultat bez jedinice je u jedinici dizajna.",
"ui.equation_parametric":"Parametarski",
"ui.equation_variable_unit":"Varijabla ima jedinicu raspona",
"ui.explode_needs_two_components":"Rastavljeni prikaz razdvaja komponente, pa dizajn treba imati dvije ili više njih (Nova komponenta, Umetni dizajn ili Napravi komponente iz tijela)",
"ui.exportDxf":"Izvezi DXF…",
"ui.export_ellipsis_keymap":"Izvezi…",
"ui.export_keymap_tip":"Tipke, favoriti okvira S i traka s alatima, kao datoteka",
@@ -4291,6 +4707,7 @@
"ui.insert_design.saved_file":"{name} ima nesačuvane promjene, pa je umetnuta njegova sačuvana datoteka. Sačuvajte ga, a zatim pokrenite Ažuriraj veze da unesete promjene.",
"ui.insert_design.unsaved":"Nesačuvane promjene",
"ui.inspect":"Pregledaj",
"ui.instances":"Instance",
"ui.intersect":"Presjek",
"ui.isolate":"Izoluj",
"ui.join":"Spoji",
@@ -4299,12 +4716,14 @@
"ui.joints":"Spojevi",
"ui.keyboard_shortcuts":"Prečice na tastaturi",
"ui.language":"Jezik",
"ui.lasso_select":"Laso (povucite petlju slobodnom rukom: uzima sve što je u cijelosti unutra)",
"ui.layout_compact":"Kompaktno",
"ui.layout_floating":"Plutajuće",
"ui.length":"Dužina",
"ui.length_decimals":"Decimale dužine",
"ui.light":"Svijetla",
"ui.line":"Linija",
"ui.line_arc_hint":"Tangentni luk: kliknite kraj luka. Ponovo se zadržite na posljednjoj tački za linije; desni klik ili Esc za završetak",
"ui.link_copies":"Poveži identične kopije",
"ui.link_copies_keep":"Zadrži",
"ui.link_copies_link":"Poveži",
@@ -4393,6 +4812,7 @@
"ui.part_size_shared":"Ponovo gradi dio, zamjenjujući sve dodane operacije. Svi primjerci ove komponente se ažuriraju.",
"ui.paste":"Zalijepi",
"ui.path":"Putanja",
"ui.pattern_object_type_tip":"Tijela: puni oblici, biraju se u prikazu ili u stablu modela; svako se kopira u cijelosti.\nOperacije: koraci vremenske trake, poput ekstruzije ili rupe, biraju se na vremenskoj traci ili na licu koje su napravili; korak se ponavlja.\nSkica nije ni jedno ni drugo: ponovite njene krive pomoću alata Niz ili Preslikaj u samoj skici ili je prvo ekstrudirajte.",
"ui.pattern_on_path":"Niz duž putanje",
"ui.perforate_margin_default":"iz prečnika",
"ui.perforate_pitch":"Korak",
@@ -4419,12 +4839,17 @@
"ui.plugins_skipped":"Foldere nije bilo moguće pročitati: {count}.",
"ui.plugins_version":"{version}",
"ui.point":"Tačka",
"ui.point_cloud_add_filter":"Dodaj filter…",
"ui.point_cloud_auto_range":"Automatski opseg",
"ui.point_cloud_color_by":"Boja prema",
"ui.point_cloud_file_colors":"Boje iz datoteke",
"ui.point_cloud_filter_by":"Filtriraj prema",
"ui.point_cloud_height_high":"Najviše",
"ui.point_cloud_height_low":"Najniže",
"ui.point_cloud_legend_filter":"Prikazano i skriveno u legendi iznad",
"ui.point_cloud_no_file_colors":"Datoteka nema boje",
"ui.point_cloud_pause":"Pauziraj",
"ui.point_cloud_play":"Reprodukuj",
"ui.point_cloud_single_color":"Jedna boja",
"ui.point_cloud_size":"Veličina tačke",
"ui.point_cloud_units":"Jedinice datoteke",
@@ -4433,9 +4858,9 @@
"ui.polygon":"Poligon",
"ui.preferences":"Postavke",
"ui.press_a_key":"pritisnite tipku…",
"ui.print_face_body_not_sent":"Tijelo te površine se ne šalje: prvo ga dodajte u Tijela",
"ui.print_face_cleared":"{body}: površina za štampu uklonjena",
"ui.print_face_input":"Površina za štampu",
"ui.print_face_one_body":"Površina za štampu pripada jednom tijelu: pošaljite to tijelo samo da biste je promijenili",
"ui.print_face_pick":"Odaberite ravnu površinu punog tijela da postane površina za štampu",
"ui.print_face_set":"{body}: površina za štampu postavljena; Pošalji u slajser polaže tijelo na nju",
"ui.profile":"Profil",
@@ -4453,6 +4878,7 @@
"ui.properties.inertia_y":"Iyx, Iyy, Iyz",
"ui.properties.inertia_z":"Izx, Izy, Izz",
"ui.properties.measuring":"Mjerenje…",
"ui.properties.measuring_bodies":"Mjerenje… {done} od {total} tijela",
"ui.properties.measuring_failed":"Mjerenje je zaustavljeno prije završetka.",
"ui.properties.principal_axis":"Glavna osa {number}",
"ui.sketch_report.all_constrained":"Sve je potpuno ograničeno.",
"ui.sketch_report.dof":"Stepeni slobode",
"ui.sketch_report.loose":"Nije potpuno ograničeno",
"ui.sketch_report.status":"Status",
"ui.sketch_report.title":"Izvještaj o skici",
"ui.sketch_scale":"Skaliranje skice",
"ui.sketches":"Skice",
"ui.slice":"Presijeci",
@@ -4656,12 +5088,15 @@
"ui.view_angles":"Uglovi prikaza",
"ui.view_angles_convention":"Stepeni oko ose prema gore. Skretanje 0° je pogled sprijeda, 90° slijeva, −90° zdesna, 180° straga; nagib 90° je pogled odozgo; pozitivno valjanje okreće model u smjeru kazaljke na satu.",
"ui.view_angles_help":"Prikazuje nagib, skretanje i valjanje prikaza u stepenima i njegovu projekciju ispod alata za orijentaciju. Kliknite očitanje da upišete tačne uglove.",
"prefs.max_file_size_flag":"This run started with --max-file-size {size}, which applies until SolidCraft closes. These settings apply when it starts without it.",
"prefs.max_file_size_note":"Defaults: 512 MB and 256 MB; at most 16 GB. Opening a file takes several times its size in memory. A design that keeps a large import may need a higher design file limit to save and reopen.",
"prefs.max_file_size_step":"STEP and import files",
"prefs.max_file_size_web":"The web app opens STEP and import files up to 512 MB and designs up to 256 MB: a browser tab can't hold larger files. The desktop app can raise these limits.",
"prefs.megabytes":"MB",
"prefs.network_locations_note":"For organisations that keep designs on file servers. Off: only servers you allow.",
"prefs.sketch_conflict_colour":"Conflicting geometry in the conflict colour",
"prefs.sketch_conflict_colour_note":"While a sketch's constraints conflict, the curves and points a failing constraint holds are drawn in the conflict colour too, not only its glyph or dimension. Off: they keep their usual colours.",
"prefs.sketch_construction_lines":"Extended construction line tools",
@@ -86,12 +93,18 @@
"prefs.sketch_tracking_guides":"Centre and midpoint alignment guides",
"prefs.sketch_tracking_guides_note":"Hover over a circle centre or straight-edge midpoint, then move horizontally or vertically to show a temporary dotted guide.",
"prefs.status_bar_note":"A thin bar along the window's bottom edge shows what is being edited, the open sketch's state in its colour and the design's units; a click on the units changes them. The sketch's state then no longer shows in the view's corner.",
"prefs.structure.appearance_note":"Colours, text and accessibility.",
"parts.family.set_screw":"Prisionero con hexágono interior, punta plana",
"parts.family.socket_head_cap_screw":"Tornillo cilíndrico con hexágono interior",
"parts.family.washer":"Arandela plana",
"parts.family.washer_sae":"Arandela plana, SAE (estrecha)",
"parts.family.washer_uss":"Arandela plana, USS (ancha)",
"parts.holes":"Agujeros (opcional)",
"parts.placement_hint":"elige uno o más agujeros para colocar una pieza en cada uno, o Aceptar la coloca en el origen",
"parts.system":"Sistema de unidades",
"parts.system.inch":"Pulgadas",
"parts.system.metric":"Métrico",
"pattern.alignment_2":"Alineación 2",
"pattern.alignment_hint":"Los recuentos incluyen el original. Centrar equilibra las copias; Invertir elige el lado adicional cuando el total es par.",
"pattern.direction_1":"Dirección 1",
@@ -1851,6 +1871,8 @@
"prefs.bottom_centre":"Centro abajo",
"prefs.bottom_right":"Derecha abajo",
"prefs.browser":"Explorador",
"prefs.browser_components_open":"Componentes abiertos al inicio",
"prefs.browser_components_open_note":"Cada componente del explorador empieza abierto, como antes, en lugar de cerrado hasta que lo abras.",
"prefs.browser_eye_left":"Ojo junto a la flecha de plegado",
"prefs.browser_eye_left_note":"Las filas del explorador muestran su ojo de mostrar/ocultar junto a la flecha de plegado, como antes, en lugar de",
"prefs.browser_reveal_on_hover":"Mostrar al pasar el puntero",
@@ -1965,6 +1987,8 @@
"prefs.origin_plane_names":"Nombres de los planos de origen",
"prefs.origin_plane_names_note":"Nombres que se muestran en el explorador, diálogos y listas. {top} es XY, {front} es XZ y {right} es YZ",
"prefs.overall_speed":"Velocidad general",
"prefs.parameter_list_rows":"Filas de la lista de parámetros",
"prefs.parameter_list_rows_tip":"Número de filas visibles en la lista de parámetros",
"prefs.persistent_ribbon_pressed":"Resaltar comandos activos de la cinta",
"prefs.persistent_ribbon_pressed_help":"Resaltar comandos de la cinta mientras sus efectos están activos. Desactivar para mantener el comportamiento anterior.",
"prefs.perspective_fov":"Campo de visión",
@@ -2041,6 +2065,8 @@
"prefs.sketch_tab_always_note":"La pestaña Boceto permanece en la cinta, tras Modelo, mientras no haya ningún boceto abierto. Sus herramientas de dibujo inician un boceto en el plano o cara seleccionados, o en el que elijas a continuación, con la herramienta lista.",
"prefs.sketch_tracking_guides":"Guías de alineación a centro y punto medio",
"prefs.sketch_tracking_guides_note":"Al pasar el ratón por el centro de un círculo o el punto medio de un borde recto, muévete horizontal o verticalmente para mostrar una guía punteada temporal.",
"prefs.sketch_tracking_points":"Guías de alineación desde extremos y esquinas al dibujar",
"prefs.sketch_tracking_points_note":"Mientras una herramienta de dibujo espera un punto, al pasar el ratón por el extremo de una línea o un arco, la esquina de un rectángulo o un punto libre se muestra la misma guía punteada temporal que en un centro o punto medio. Desactivado: solo centros y puntos medios.",
"prefs.sketching":"Bocetos",
"prefs.snap_drawing_note":"Mientras dibujas o arrastras un punto del boceto.",
"prefs.source":"Origen",
@@ -2089,6 +2115,8 @@
"prefs.under_cursor":"Bajo el cursor",
"prefs.units_precision":"Unidades y precisión",
"prefs.updates":"Actualizaciones",
"prefs.value_boxes_in_view":"Cuadros de valor en la vista",
"prefs.value_boxes_in_view_tip":"Muestra los cuadros de valor de los parámetros en la vista 3D",
"prefs.view":"Comportamiento de la vista",
"prefs.view_confirm_corner":"Aceptar y Cancelar en la esquina de la vista",
"prefs.view_confirm_corner_note":"Mientras un diálogo o un boceto está abierto, una marca y una equis en la esquina superior derecha de la vista hacen lo que el Aceptar y el Cancelar del diálogo, o terminan y cancelan el boceto. El navegador de vistas se mueve debajo.",
@@ -2098,6 +2126,10 @@
"prefs.viewport_background":"Fondo",
"prefs.viewport_background_colour":"Color",
"prefs.viewport_background_theme":"Degradado del tema",
"prefs.viewport_section_status":"Estado de la sección del visor",
"prefs.viewport_section_status_help":"Muestra el estado de la sección activa en la barra de estado",
"prefs.viewport_status_summary":"Resumen del estado del visor",
"prefs.viewport_status_summary_help":"Muestra un resumen del estado en la barra de estado del visor",
"render.output_swap_orientation":"Intercambiar ancho y alto",
"render.output_tools_inspector":"Edita el tamaño y el formato en el inspector de Salida.",
"render.output_view_image":"Ver imagen",
@@ -3189,6 +3223,7 @@
"render.size_custom":"Personalizado…",
"render.size_full_hd":"Full HD",
"render.size_hd":"HD",
"render.size_needs_profile":"El tamaño {size} necesita el perfil {profile}",
"render.size_presets":"Preestablecidos de tamaño",
"render.size_presets_pending":"Llega con el editor de Salida",
"render.size_preview":"Previsualización",
@@ -3476,6 +3511,24 @@
"sheet.flange_type_contour":"Contorno",
"sheet.flange_type_edge":"Arista",
"sheet.no_body":"no hay ningún cuerpo de chapa: crea uno con Pestaña > Base o convierte una placa en chapa con Convertir a chapa (elige su cara plana grande)",
"sketch_text.on_path":"El texto sigue su trayectoria: la curva determina su posición",
@@ -3545,10 +3599,7 @@
"the two origins are on the same component":"los dos orígenes están en el mismo componente",
"thread.automatic_size":"Tamaño automático",
"thread.designation":"Designación",
"thread.direction":"Dirección de la rosca",
"thread.iso_metric":"Métrica ISO",
"thread.left_hand":"Zurda",
"thread.right_hand":"Diestra",
"thread.select_size":"Seleccionar tamaño",
"timeline.delete_after_marker_one":"Eliminar 1 operación después del marcador de la línea de tiempo",
"timeline.delete_after_marker_other":"Eliminar {count} operaciones después del marcador de la línea de tiempo",
@@ -3652,6 +3703,8 @@
"ui.3d_mouse_section":"Ratón 3D",
"ui.3d_mouse_show_in_view":"Mostrar el ratón 3D en la vista 3D",
"ui.3d_mouse_show_in_view_tip":"Una imagen de tu ratón 3D en la esquina inferior izquierda que se mueve cuando lo mueves.",
"ui.3d_mouse_sketch_orbit":"Órbita de boceto con ratón 3D",
"ui.3d_mouse_sketch_orbit_tip":"Usa el ratón 3D para orbitar en el boceto",
"ui.3d_mouse_skip":"Mi dispositivo no puede hacer esto",
"ui.3d_mouse_skip_tip":"Omite este movimiento en ambos sentidos; la calibración lo deja fuera.",
"ui.3d_mouse_speed":"Velocidad del ratón 3D",
@@ -3815,6 +3868,8 @@
"ui.agent_chat_remove":"Quitar de la cola",
"ui.agent_chat_remove_file":"Quitar de este mensaje",
"ui.agent_chat_remove_imported":"Quitar de este mensaje; la pieza permanece en el diseño (Deshacer la elimina)",
"ui.agent_chat_reply_cut_off":"Respuesta del agente cortada",
"ui.agent_chat_reply_declined":"Respuesta del agente rechazada",
"ui.agent_chat_retry":"Reintentar",
"ui.agent_chat_right":"Derecha",
"ui.agent_chat_save":"Guardar",
@@ -3873,12 +3928,17 @@
"ui.ai_copy_suffix":"copia",
"ui.ai_custom_url":"URL personalizada",
"ui.ai_default":"Predeterminado",
"ui.ai_edit":"Editar",
"ui.ai_edit_agent_title":"Editar agente",
"ui.ai_edit_gone":"Este agente se eliminó, así que no hay nada que guardar.",
"ui.ai_edit_tip":"Cambia el nombre, el comando o el endpoint de este agente. La clave guardada sigue oculta.",
"ui.ai_http_busy":"el servicio está ocupado o ha superado su límite; inténtalo más tarde",
"ui.ai_http_key":"el servicio ha rechazado la clave: compruébala en Preferencias > IA",
"ui.ai_http_not_found":"no existe ese servicio o modelo: comprueba la URL base y el nombre del modelo",
"ui.ai_http_too_large":"la conversación es demasiado grande para este endpoint; empieza un chat nuevo",
"ui.ai_key":"Clave de API",
"ui.ai_key_hint":"opcional; se guarda en el llavero del sistema",
"ui.ai_key_keep_hint":"déjalo vacío para conservar la clave guardada",
"ui.ai_key_needs_https":"La clave solo se envía mediante HTTPS o a este ordenador.",
"ui.ai_key_note":"Se guarda en el llavero del sistema, nunca en los ajustes de SolidCraft. Déjalo vacío para un servidor local.",
"ui.ai_keychain_error":"El llavero del sistema ha rechazado la operación: {error}",
@@ -3910,6 +3970,7 @@
"ui.ai_request_timeout":"Tiempo de espera de las peticiones",
"ui.ai_request_timeout_hint":"Cuánto puede tardar una petición al modelo en esta API: de 30 s a una hora. Auméntalo para un modelo local lento.",
"ui.ai_reset":"Restablecer",
"ui.ai_save":"Guardar",
"ui.ai_settings":"Ajustes de IA…",
"ui.ai_show_features":"Mostrar funciones de IA",
"ui.ai_show_features_note":"Chat del agente: panel en el que un agente de programación que ya utilices, o un servicio de modelos que elijas, trabaja sobre el diseño abierto. Desactivado: no hay botón, atajo, entrada de menú ni panel de IA, y no se busca ni inicia nada.",
@@ -4043,10 +4104,15 @@
"ui.construction.reference_hint":"Línea de construcción: elige una línea recta, luego un punto; clic derecho para cambiar la",
"ui.construction.ribbon_label":"X-Líneas",
"ui.context_menu":"Menú contextual",
"ui.continuity_crease":"Arista",
"ui.continuity_curvature":"Curvatura",
"ui.continuity_curvature_change":"Cambio de curvatura",
"ui.continuity_g0":"G0 arista",
"ui.continuity_g1":"G1 tangencia",
"ui.continuity_g2":"G2 curvatura",
"ui.continuity_gap":"Separación",
"ui.continuity_position":"Posición",
"ui.continuity_tangent":"Tangente",
"ui.copy":"Copiar",
"ui.corner":"Esquina",
"ui.corners":"Esquinas",
@@ -4303,6 +4369,7 @@
"ui.insert_design.saved_file":"{name} tiene cambios sin guardar, así que se insertó su archivo guardado. Guárdalo y luego Actualizar vínculos para traer los cambios.",
"ui.insert_design.unsaved":"Cambios sin guardar",
"ui.inspect":"Inspeccionar",
"ui.instances":"Instancias",
"ui.intersect":"Intersecar",
"ui.isolate":"Aislar",
"ui.join":"Unir",
@@ -4450,9 +4517,9 @@
"ui.polygon":"Polígono",
"ui.preferences":"Preferencias",
"ui.press_a_key":"pulsa una tecla…",
"ui.print_face_body_not_sent":"El cuerpo de esa cara no se envía: añádelo primero a Cuerpos",
"ui.print_face_cleared":"{body}: cara de impresión limpiada",
"ui.print_face_input":"Cara de impresión",
"ui.print_face_one_body":"Se ha elegido una cara de impresión para un cuerpo: envía ese cuerpo solo para cambiarla",
"ui.print_face_pick":"Selecciona una cara plana de un cuerpo sólido para hacerla la cara de impresión",
"ui.print_face_set":"{body}: cara de impresión establecida; Enviar a Laminador coloca el cuerpo sobre ella",
"ui.profile":"Perfil",
@@ -4470,6 +4537,7 @@
"ui.properties.inertia_y":"Iyx, Iyy, Iyz",
"ui.properties.inertia_z":"Izx, Izy, Izz",
"ui.properties.measuring":"Midiendo…",
"ui.properties.measuring_bodies":"Midiendo… {done} de {total} cuerpos",
"ui.properties.measuring_failed":"La medición se detuvo antes de terminar.",
"ui.properties.principal_axis":"Eje principal {number}",
"ui.viewport_status_summary_heading":"Encabezado del resumen",
"ui.viewport_status_summary_label":"Etiqueta del resumen: {name} ({count})",
"ui.viewport_status_summary_more":"Más del resumen ({count})",
"ui.viewport_theme_follow":"Seguir tema",
"ui.visual_shaded_hidden_edges":"Sombreado con aristas ocultas",
"ui.visual_shaded_with_edges":"Sombreado con aristas",
@@ -4734,7 +4810,7 @@
"update.check_unavailable":"Las comprobaciones de actualización no están disponibles para esta instalación.",
"update.checking":"Comprobando…",
"update.copy":"Copiar",
"update.dmg_opened":"La imagen de disco está abierta y verificada: arrastra SolidCraft a Aplicaciones, sustituye la copia anterior y reinicia SolidCraft.",
"update.dmg_opened":"La imagen de disco está abierta y verificada: sal de SolidCraft, arrastra el nuevo SolidCraft a Aplicaciones, sustituye la copia anterior y vuelve a abrir SolidCraft.",
"update.download":"Descargar",
"update.download_open":"Descargar y abrir",
"update.downloading":"Descargando y verificando… {done} de {total} MB",
"ui.insert_design.saved_file":"Mallissa {name} on tallentamattomia muutoksia, joten sen tallennettu tiedosto lisättiin. Tallenna se ja tuo muutokset valitsemalla Päivitä linkit.",
"dialog.no_shown_body":"Aucun corps affiché à modifier: affichez-en un ou choisissez Nouveau corps",
"dialog.pattern_sketch_not_object":"Choisissez des corps ou des fonctions : une esquisse n'est ni l'un ni l'autre. Répétez ses courbes avec la Répétition ou la Symétrie de l'esquisse, ou extrudez-la d'abord.",
"dialog.selection_guidance":"Sélectionner une entrée pour la modifier. Cliquer sur un objet sélectionné pour le retirer; Ctrl/Cmd-clic le bascule aussi. Vérifier l'aperçu, puis appuyer sur OK.",
@@ -1390,21 +1400,168 @@
"from the rule":"selon la règle",
"help.apache":"Licence Apache 2.0",
"help.appearance.assign":"Donne aux corps, faces ou composants sélectionnés une couleur ou l'apparence d'un matériau, sans changer leur poids. À utiliser pour distinguer des pièces ou prévisualiser une finition.",
"help.assembly.bom":"Liste les pièces de la conception ou d'un composant avec leurs quantités, par référence, et peut enregistrer la liste en CSV ou JSON. À utiliser comme nomenclature pour la commande et l'assemblage.",
"help.build":"Version {version} · commit {commit} · compilée le {date}",
"help.canvas.decal":"Place une image sur une face plane du modèle, comme un autocollant. À utiliser pour afficher une étiquette, un logo ou un motif imprimé sur une pièce.",
"help.canvas.edit":"Modifie un canevas: sa position, sa taille, son angle, son opacité, sa symétrie, sa visibilité ou son nom. À utiliser pour aligner une image de référence sur l'esquisse que vous décalquez.",
"help.canvas.insert":"Place une image PNG ou JPEG sur un plan ou une face comme référence translucide. À utiliser pour décalquer une photo ou un dessin dans une esquisse, l'image étant mise à une échelle connue.",
"help.component.break_link":"Détache un composant lié de son fichier de conception en conservant ses corps tels quels. À utiliser lorsque la pièce ne doit plus suivre les modifications du fichier d'origine.",
"help.component.capture_position":"Conserve les positions des pièces que vous avez déplacées à la main, qui deviennent leur nouvelle position. À utiliser après avoir fait glisser en place des pièces qu'aucune liaison ne maintient.",
"help.component.create":"Ajoute un composant vide à la conception, dans le composant actif sauf si vous choisissez un autre parent. À utiliser pour donner à une nouvelle pièce d'un assemblage son propre espace pour les corps et les esquisses.",
"help.component.finish_edit":"Enregistre la pièce que vous modifiez sur place, revient à son assemblage et met à jour l'assemblage à partir d'elle. À utiliser lorsque vos modifications de la pièce liée sont terminées.",
"help.component.from_bodies":"Transforme chaque corps sélectionné en composant à part entière, portant le nom du corps. À utiliser lorsqu'une conception faite de corps isolés doit devenir un assemblage dont les pièces peuvent être reliées et déplacées.",
"help.component.insert_design":"Insère une autre conception enregistrée comme composant lié à son fichier, avec ses corps solides placés comme dans ce fichier. À utiliser pour réutiliser une pièce dans un assemblage et récupérer les modifications ultérieures avec Mettre à jour les liens.",
"help.component.properties":"Affiche le volume, la masse, le centre de gravité et les moments d'inertie d'un composant, d'après les matériaux de ses corps. À utiliser pour vérifier le poids et l'équilibre d'un assemblage.",
"help.component.revert_position":"Remet à leur place les pièces que vous avez déplacées à la main, en abandonnant les déplacements non capturés. À utiliser pour annuler des essais de déplacement dans un assemblage.",
"help.component.update_links":"Relit les fichiers de conception liés et remplace les corps qui ont changé. À utiliser après avoir modifié une pièce utilisée par cet assemblage.",
"help.config.configure":"Ajoute des paramètres, des fonctions, des matériaux ou des apparences comme colonnes de la table des configurations. À utiliser pour créer des variantes d'une conception, par exemple les tailles d'une pièce.",
"help.config.preview":"Vérifie qu'une ligne de la table des configurations se reconstruit, sans modifier la conception ni son historique. À utiliser avant de basculer vers une variante incertaine.",
"help.config.rules":"Affiche les règles de la table des configurations, ses lignes et la ligne active. À utiliser pour voir comment les variantes d'une conception sont définies.",
"help.config.table":"Affiche la table des configurations: une ligne par variante, une colonne par paramètre ou fonction, et si la conception correspond toujours à la ligne active. À utiliser pour passer en revue les variantes d'une conception.",
"help.connect_note":"Redémarrez chaque assistant pour charger le serveur SolidCraft. Chaque fichier a été sauvegardé en .bak avant d'être modifié.",
"help.connect_title":"Connecter les assistants IA",
"help.construct.axis.edge":"Crée un axe de construction le long d'une arête droite ou d'une ligne d'esquisse. À utiliser comme axe pour une révolution, une répétition circulaire ou une liaison.",
"help.construct.axis.normal_to_face":"Crée un axe de construction passant par un point, perpendiculaire à une face. À utiliser comme axe qui sort droit d'une surface.",
"help.construct.axis.through_cylinder":"Crée un axe de construction passant par le centre d'une face cylindrique, conique ou torique, ou d'une arête circulaire. À utiliser pour faire tourner ou répéter des fonctions autour d'une pièce ronde.",
"help.construct.axis.two_planes":"Crée un axe de construction là où deux plans ou faces planes se rencontrent. À utiliser lorsque l'axe voulu est la droite entre deux faces.",
"help.construct.axis.two_points":"Crée un axe de construction passant par deux points, sommets ou points d'esquisse. À utiliser pour un axe qui relie deux positions connues.",
"help.construct.plane.along_path":"Crée un plan de construction perpendiculaire à une arête ou une courbe, à une position choisie le long de celle-ci. À utiliser pour esquisser le profil d'un balayage ou une coupe d'une trajectoire.",
"help.construct.plane.at_angle":"Crée un plan de construction tourné d'un angle par rapport à un plan ou une face, autour d'un axe ou d'une arête. À utiliser pour des esquisses inclinées, par exemple une équerre à angle.",
"help.construct.plane.midplane":"Crée un plan de construction à mi-distance entre deux plans ou faces planes, ou bissecteur lorsqu'ils se rencontrent en formant un angle. À utiliser comme plan de symétrie.",
"help.construct.plane.offset":"Crée un plan de construction parallèle à un plan ou une face plane, à une distance donnée ou passant par un point. À utiliser pour esquisser à une hauteur précise au-dessus d'une face.",
"help.construct.plane.perpendicular":"Crée un plan de construction qui contient une droite ou une arête et qui est perpendiculaire à un plan ou une face. À utiliser pour esquisser à la verticale sur un modèle, le long d'une arête.",
"help.construct.plane.tangent":"Crée un plan de construction qui touche un cylindre, un cône, une sphère ou un tore en un point. À utiliser pour esquisser sur le flanc d'une pièce ronde.",
"help.construct.plane.three_points":"Crée un plan de construction passant par trois points. À utiliser pour un plan défini par des positions du modèle, comme trois coins.",
"help.construct.plane.two_edges":"Crée un plan de construction passant par deux arêtes droites ou lignes situées dans un même plan. À utiliser pour un plan à travers une pièce, par exemple par deux arêtes opposées.",
"help.construct.point.along_path":"Crée un point de construction à une position donnée le long d'une arête ou d'une courbe. À utiliser comme référence à mi-chemin sur une trajectoire.",
"help.construct.point.center":"Crée un point de construction au centre d'une arête circulaire, d'un cercle ou arc d'esquisse, d'une sphère ou d'un tore. À utiliser comme référence pour des perçages, des axes et des liaisons.",
"help.construct.point.edge_plane":"Crée un point de construction là où une arête ou une ligne traverse un plan ou une face plane. À utiliser pour repérer où une trajectoire coupe un plan.",
"help.construct.point.three_planes":"Crée un point de construction là où trois plans ou faces planes se rencontrent. À utiliser comme référence de coin, même lorsque le modèle n'a pas de sommet à cet endroit.",
"help.construct.point.two_edges":"Crée un point de construction là où deux arêtes ou lignes se rencontrent, ou se rapprochent le plus. À utiliser comme référence à un coin virtuel.",
"help.construct.point.vertex":"Crée un point de construction sur un sommet ou un point d'esquisse. À utiliser comme référence qui subsiste lorsque l'esquisse ou le corps qui l'entoure est masqué.",
"help.contact.check":"Liste les paires de pièces des jeux de contact qui se traversent dans leur position actuelle. À utiliser pour trouver les collisions avant de piloter les liaisons ou de lancer une étude de mouvement.",
"help.contact.create":"Regroupe deux pièces ou plus dans un jeu de contact, dont les corps ne peuvent pas se traverser pendant le mouvement des liaisons. À utiliser pour des pièces qui doivent s'arrêter au contact, comme un levier contre sa butée.",
"help.contact.disable_all":"Désactive le contact: les liaisons pilotées et les études de mouvement ne s'arrêtent plus là où les pièces se touchent. À utiliser pour déplacer à nouveau les pièces librement, ou pour garder un grand assemblage réactif.",
"help.contact.edit":"Modifie un jeu de contact: les pièces qu'il contient, son nom, ou s'il est désactivé ; peut aussi supprimer le jeu. À utiliser pour ajuster les pièces qui ne doivent pas se traverser.",
"help.contact.enable_all":"Place toutes les pièces de l'assemblage dans un seul jeu de contact, de sorte qu'aucune paire de pièces ne puisse se traverser pendant le mouvement des liaisons. À utiliser pour une vérification rapide d'un mécanisme entier.",
"help.contact.enable_sets":"Active le contact pour les jeux de contact que vous avez définis, de sorte que les liaisons pilotées et les études de mouvement s'arrêtent là où leurs pièces se traverseraient. À utiliser pour retrouver vos jeux après avoir désactivé le contact.",
"help.contact.list":"Liste les jeux de contact de la conception, les pièces de chacun et si le contact est activé. À utiliser pour vérifier la configuration du contact avant de piloter l'assemblage.",
"help.document.inspect":"Affiche une vue d'ensemble de la conception: ses composants, corps, esquisses, fonctions et paramètres. À utiliser pour se repérer dans une conception que vous n'avez pas créée vous-même.",
"help.document.units":"Change les unités dans lesquelles la conception affiche les longueurs, par exemple mm ou pouces. La géométrie garde sa taille; seuls l'affichage et les nombres bruts suivent.",
"help.edit.checkpoint":"Mémorise la conception, l'esquisse active et l'historique d'annulation dans leur état actuel. À utiliser avant un essai risqué dont vous voudrez peut-être revenir.",
"help.edit.restore_checkpoint":"Revient à un point de restauration, historique d'annulation compris. À utiliser pour abandonner en une seule étape tout ce qui a été fait depuis ce point.",
"help.explode.create":"Crée une vue éclatée qui écarte les pièces du centre de l'assemblage, ou selon les déplacements que vous définissez. À utiliser pour montrer comment un assemblage se monte, pour des notices ou des présentations.",
"help.face.delete":"Supprime les faces sélectionnées et laisse les faces voisines refermer le vide, ou laisse le trou ouvert. À utiliser pour retirer un arrondi, un trou ou un bossage qui gêne.",
"help.file.insert_mesh":"Ajoute un fichier 3MF, STL, OBJ, PLY ou glTF à la conception sous forme de corps maillés dans un nouveau composant. À utiliser pour placer à côté de votre conception un modèle téléchargé ou numérisé comme référence.",
"help.file.insert_step":"Ajoute un fichier STEP, IGES, FreeCAD ou Rhino à la conception sous forme de corps solides dans un nouveau composant; les pièces d'un assemblage deviennent des composants imbriqués. À utiliser pour importer des modèles de fournisseurs ou d'autres logiciels de CAO.",
"help.file.save_mesh":"Enregistre des corps en maillage STL, 3MF ou OBJ, avec la finesse des faces courbes que vous choisissez. À utiliser pour préparer des pièces à l'impression 3D ou pour des logiciels qui lisent des maillages.",
"help.file.send_to_slicer":"Enregistre les corps sélectionnés en fichier 3MF et l'ouvre dans le slicer de votre choix. À utiliser pour passer du modèle à l'impression en une seule étape.",
"help.font_details":"L’interface utilise les polices intégrées d’egui (Ubuntu Light et Hack, sous les licences Ubuntu Font Licence et MIT/Bitstream Vera ; Noto Emoji et la police d’icônes emoji, sous OFL et MIT). Le texte des esquisses utilise Liberation Sans (SIL OFL 1.1). Le pack de polices facultatif de The Crafting Apps, craft-fonts (BIZ UDPGothic, Shippori Mincho, BIZ UDMincho, Noto Sans CJK SC, Noto Sans Arabic ; SIL OFL 1.1), n’est pas inclus dans les versions de SolidCraft.",
"help.fonts":"Polices",
"help.frame.member":"Place un profilé, tel qu'un tube ou un profilé d'aluminium, le long des lignes d'une esquisse de structure, un élément par ligne. À utiliser pour construire des châssis, des racks et des structures soudées.",
"help.inspect.accessibility":"Colore les faces qu'un outil peut atteindre depuis une direction, et celles qu'il ne peut pas atteindre. À utiliser pour vérifier l'usinabilité ou le moulage d'une pièce depuis ce côté.",
"help.inspect.center_of_mass":"Affiche le centre de gravité des corps, de chacun séparément et de l'ensemble, à densité uniforme. À utiliser pour vérifier l'équilibre et l'endroit où une pièce basculera.",
"help.inspect.colored_components":"Donne à chaque composant sa propre couleur temporaire, sans modifier les apparences. À utiliser pour distinguer d'un coup d'œil les pièces d'un assemblage.",
"help.inspect.compare":"Compare deux corps et montre où l'un a de la matière que l'autre n'a pas, avec le volume et l'écart. À utiliser pour comparer une pièce modifiée ou importée à l'original.",
"help.inspect.continuity":"Vérifie la douceur de raccord des faces le long de leurs arêtes: jeux, cassures ou sauts de courbure, et colore les raccords. À utiliser pour trouver où des surfaces ne se raccordent pas proprement.",
"help.inspect.curvature_comb":"Trace des peignes le long de courbes, d'arêtes ou de faces, dont les dents montrent l'intensité de la courbure. À utiliser pour repérer les méplats, les cassures et les courbures irrégulières.",
"help.inspect.curvature_map":"Colore les faces selon l'intensité de leur courbure, en rouge là où le rayon est petit. À utiliser pour trouver les zones serrées et juger la douceur d'une surface.",
"help.inspect.draft":"Colore les faces selon leur angle de dépouille par rapport à une direction de démoulage, et signale celles qui en manquent. À utiliser pour vérifier une pièce avant moulage ou coulée.",
"help.inspect.environment_map":"Affiche le modèle avec une finition réfléchissante, de type miroir. À utiliser pour juger la fluidité des surfaces d'après la façon dont les reflets les parcourent.",
"help.inspect.interference":"Trouve les corps qui se chevauchent et montre chaque chevauchement avec son volume. À utiliser pour vérifier qu'aucune pièce d'un assemblage n'entre en collision.",
"help.inspect.isocurve":"Trace les courbes isoparamétriques des faces, c'est-à-dire la grille sur laquelle la surface est construite. À utiliser pour voir comment une surface s'écoule et où elle se resserre.",
"help.inspect.measure":"Mesure des longueurs, distances, angles, aires et rayons entre les éléments choisis, ou le volume et la masse de corps. À utiliser pour vérifier des dimensions et des jeux.",
"help.inspect.minimum_radius":"Trouve le plus petit rayon de courbure de courbes, d'arêtes ou de faces, et son emplacement. À utiliser pour vérifier qu'un outil ou une buse peut suivre la forme.",
"help.inspect.section":"Ouvre la vue selon un plan de coupe et hachure les faces coupées, sans modifier le modèle. À utiliser pour regarder à l'intérieur des pièces et des assemblages.",
"help.inspect.zebra":"Affiche des bandes noires et blanches réfléchies sur les faces du modèle. À utiliser pour juger la douceur: des bandes qui se cassent ou se brisent sur une arête révèlent une mauvaise transition.",
"help.joint.as_built":"Relie deux pièces là où elles se trouvent déjà, sans déplacer aucune des deux, et définit comment elles peuvent encore bouger. À utiliser pour des pièces déjà placées dans leur position finale.",
"help.joint.cam":"Relie une came tournante à un suiveur, qui glisse ou pivote lorsque le contour de la came passe dessous. À utiliser pour des cames, des excentriques et des commandes de soupapes.",
"help.joint.create":"Relie deux pièces aux origines de liaison que vous choisissez et déplace la seconde pièce en place; le type de liaison définit comment elles peuvent encore bouger. À utiliser pour construire un assemblage dont les pièces se déplacent comme le vrai mécanisme.",
"help.joint.drive":"Définit l'angle ou la distance d'une liaison et déplace les pièces en conséquence, dans ses limites; les liaisons couplées et les boucles fermées suivent. À utiliser pour vérifier qu'un mécanisme se déplace comme prévu.",
"help.joint.gear":"Couple deux liaisons rotatives avec un rapport d'engrenage, de sorte que piloter l'une fait tourner l'autre. À utiliser pour des engrenages droits et des couronnes, avec le rapport tiré des rayons primitifs ou des nombres de dents.",
"help.joint.limits":"Définit jusqu'où une liaison peut tourner ou coulisser, par un minimum et un maximum, ou supprime ces limites. À utiliser pour garder une charnière, une glissière ou un levier dans sa course réelle.",
"help.joint.motion_link":"Couple deux liaisons avec un rapport et un décalage, de sorte que piloter l'une déplace l'autre. À utiliser pour une relation fixe entre liaisons que Engrenage, Pignon et crémaillère ou Vis ne couvrent pas.",
"help.joint.origin":"Place sur une pièce une origine de liaison nommée: au centre d'une face ou d'une extrémité ronde, au milieu d'une arête, à un coin ou en un point. À utiliser pour préparer l'emplacement des liaisons; une origine choisie sur une face la suit lorsque la pièce change de taille.",
"help.joint.rack_pinion":"Relie un pignon tournant à une crémaillère coulissante, de sorte que la crémaillère avance de la longueur de cercle primitif que le pignon parcourt en roulant. À utiliser pour des commandes à crémaillère, des directions et des axes linéaires.",
"help.joint.reach":"Déplace un point d'une pièce vers une cible en modifiant les liaisons de sa chaîne, dans leurs limites. À utiliser pour positionner un mécanisme selon l'endroit où doit se trouver son extrémité, comme le bout d'un bras de robot.",
"help.joint.rigid_group":"Verrouille ensemble les pièces sélectionnées telles qu'elles sont, pour qu'elles se déplacent d'un seul bloc. À utiliser pour des pièces qui vont ensemble et qui n'ont aucun mouvement entre elles.",
"help.joint.screw":"Couple rotation et translation par un pas, de sorte que chaque tour avance de cette distance. À utiliser pour des vis mères, des boulons et des broches filetées.",
"help.library.apply":"Applique un matériau ou une apparence d'un fichier de bibliothèque local à des corps, des faces ou des composants. À utiliser pour réutiliser des matériaux enregistrés depuis une autre conception.",
"help.library.export":"Enregistre les matériaux et apparences de la conception dans un fichier de bibliothèque. À utiliser pour les partager ou les réutiliser dans d'autres conceptions.",
"help.library.inspect":"Vérifie un fichier de bibliothèque et liste ses matériaux et apparences, sans modifier la conception. À utiliser pour voir ce que contient une bibliothèque avant de l'appliquer.",
"help.licences":"Licences",
"help.material.assign":"Applique le matériau choisi aux corps sélectionnés, par exemple acier, aluminium ou ABS. À utiliser pour que la masse et le poids correspondent à la pièce réelle.",
"help.material.properties.validate":"Vérifie qu'une fiche de données de matériau a des valeurs cohérentes et qu'aucune n'est manquante. À utiliser avant de se fier aux données pour la masse ou la rigidité.",
"help.mesh.convert":"Reconstruit un corps maillé, tel qu'un STL, en solide modifiable avec des faces planes et cylindriques. À utiliser pour modifier une pièce mécanique importée comme un corps modélisé.",
"help.mit":"Licence MIT",
"help.motion.study":"Définit des valeurs de liaison à des étapes le long d'une chronologie et les rejoue sous forme d'animation. À utiliser pour voir un mécanisme se déplacer selon une séquence et vérifier les jeux en chemin.",
"help.motion.trace":"Trace le chemin que suit un point d'une pièce pendant la lecture d'une étude de mouvement ou le pilotage d'une liaison, et le conserve comme courbe d'esquisse 3D lorsque vous confirmez. À utiliser pour voir où arrive un mécanisme, ou pour construire à partir de sa trajectoire.",
"help.notice":"NOTICE",
"help.occurrence.ground":"Fixe une pièce en place, ou la libère, de sorte que les liaisons déplacent les autres pièces autour d'elle. À utiliser pour le châssis ou la base sur laquelle le reste de l'assemblage est construit.",
"help.occurrence.move":"Déplace une pièce d’assemblage selon les seules libertés permises par ses liaisons. Sélectionnez une face de la pièce, puis faites glisser une flèche ou un arc disponible.",
"help.parameters.change":"Ouvre le tableau des valeurs nommées et des expressions qui pilotent les cotes de la conception. À utiliser pour changer une dimension à un seul endroit et faire suivre toutes les fonctions qui l'utilisent.",
"help.parameters.export":"Enregistre les paramètres de la conception en CSV ou JSON. À utiliser pour les modifier dans un tableur ou les transférer vers une autre conception.",
"help.parameters.graph":"Montre quels paramètres et fonctions en utilisent quels autres, ainsi que les boucles ou erreurs entre eux. À utiliser pour voir ce que la modification d'un paramètre va affecter.",
"help.parameters.import":"Lit des paramètres depuis un CSV ou un JSON dans la conception, tous ou aucun. À utiliser pour importer des valeurs d'un tableur ou d'une autre conception.",
"help.parameters.move":"Déplace un paramètre utilisateur avant ou après un autre dans la liste. À utiliser pour garder ensemble les paramètres liés.",
"help.parts.fastener":"Ajoute une vis, un boulon, un écrou, une rondelle, une goupille ou un roulement standard à la taille choisie. Placé sur un perçage, il s'y loge avec une liaison, ce qui évite de modéliser soi-même les fixations.",
"help.parts.insert":"Insère une pièce standard de la famille, de la taille et de la longueur choisies. Placée sur le bord ou la paroi d'un perçage, elle s'y loge avec une liaison rigide.",
"help.parts.library":"Ouvre les pièces standard: vis, boulons, écrous, rondelles, vis sans tête, goupilles cylindriques et roulements en tailles normalisées. À utiliser pour ajouter une pièce standard plutôt que de la modéliser soi-même.",
"help.parts.resize":"Change la taille ou la longueur d'une pièce standard insérée et la reconstruit; ses liaisons la maintiennent en place. À utiliser lorsqu'une vis se révèle trop longue ou qu'un perçage demande une autre taille.",
"help.plastic.assign_rule":"Affecte une règle plastique à des corps, de sorte que leurs fonctions plastique prennent sa dépouille et son jeu par défaut. À utiliser pour configurer une pièce moulée une fois pour toutes ses fonctions.",
"help.plastic.boss":"Ajoute un bossage de vis sur une face: un plot avec perçage, dépouille, congé de pied et nervures de soutien facultatifs. À utiliser pour les points de vissage des boîtiers moulés ou imprimés.",
"help.plastic.lip":"Ajoute une lèvre ou une rainure correspondante le long du bord d'un corps évidé. À utiliser pour que deux moitiés de boîtier se positionnent l'une sur l'autre et se ferment hermétiquement.",
"help.plastic.manage_rules":"Crée et modifie des règles plastique: matériau, épaisseur de paroi, rayons, jeu et dépouille. À utiliser pour garder cohérentes les fonctions d'une pièce moulée.",
"help.plastic.rest":"Ajoute un appui sur une face: un plot rond ou rectangulaire, plein ou creux, avec dépouille. À utiliser comme support ou entretoise dans un boîtier moulé.",
"help.plastic.snap_fit":"Ajoute un crochet de clip sur une face, avec sa longueur, son épaisseur et son ergot. À utiliser pour assembler des pièces par encliquetage sans vis.",
"help.pointcloud.insert":"Insère un scan PLY, XYZ ou PTS sous forme de nuage de points à côté du modèle. Utilisez-le comme référence pour construire un modèle à partir de données mesurées.",
"help.sheet.convert":"Transforme une plaque ou un corps évidé d'épaisseur uniforme en corps de tôlerie, avec des plis aux arêtes choisies. À utiliser pour rendre une pièce existante dépliable.",
"help.sheet.export_bend_table":"Enregistre la table des plis d'un corps de tôlerie en CSV ou JSON: angles, rayons et positions des plis à plat. À utiliser pour la plieuse ou l'atelier.",
"help.sheet.export_dxf":"Enregistre la mise à plat en DXF, avec contours, lignes de pli et annotations de pli facultatives. À utiliser pour la découpe laser, plasma ou jet d'eau.",
"help.sheet.flange":"Ajoute un bord tombé : une plaque de base à partir d'une esquisse, une paroi le long d'un contour d'esquisse ouvert, ou une paroi pliée sur des arêtes de tôle. À utiliser pour construire des pièces de tôlerie.",
"help.sheet.flat_pattern":"Crée la mise à plat d'un corps de tôlerie, avec sa taille, ses découpes et ses lignes de pli. À utiliser pour vérifier le flan avant de le découper.",
"help.sheet.fold":"Plie une tôle le long d'une ligne d'esquisse selon un angle et un rayon. À utiliser pour plier une tôle plate après y avoir découpé des fonctions.",
"help.sheet.hem":"Replie un bord de tôle sur lui-même. À utiliser pour obtenir des bords sûrs et rigides, sans bavures coupantes.",
"help.sheet.manage_rules":"Crée et modifie des règles de tôlerie: épaisseur, rayon de pli, facteur K, dégagements et jeux. À utiliser pour s'adapter au matériau et aux outils de votre atelier.",
"help.sheet.path_flange":"Ajoute une chaîne de bords tombés le long d'une arête de tôle, en suivant une chaîne ouverte de lignes d'esquisse. À utiliser pour des profils en U ou en Z en une seule étape.",
"help.sheet.perforate":"Ajoute un champ de trous sur toute la tôle à plat, en motif décalé ou carré. À utiliser pour des aérations, des grilles et des panneaux allégés.",
"help.sheet.refold":"Replie un corps de tôlerie déplié. À utiliser après avoir ajouté des fonctions à la tôle à plat.",
"help.sheet.unfold":"Déplie tous les plis d'un corps de tôlerie. À utiliser pour ajouter des trous ou des découpes qui doivent traverser un pli, puis replier.",
"help.sketch.arc.center_point":"Dessine un arc de cercle autour d'un centre, d'un point de départ à un point d'arrivée. À utiliser lorsque le centre de l'arc est connu, comme un rayon autour d'un perçage ou d'un pivot.",
"help.sketch.arc.tangent":"Dessine un arc qui part de l'extrémité d'une ligne ou d'un arc et continue en tangence avec lui. À utiliser pour poursuivre une chaîne avec une courbe douce plutôt qu'un angle.",
"help.sketch.arc.three_point":"Dessine un arc d'un point de départ à un point d'arrivée en passant par un troisième point. À utiliser lorsque l'arc doit passer par des points donnés plutôt qu'autour d'un centre connu.",
"help.sketch.arc3d":"Dessine un arc de cercle exact dans l'espace par trois points, avec Esquisse 3D activée. À utiliser pour des courbes de trajectoires et de rails guides qui sortent du plan d'esquisse.",
"help.sketch.auto_constrain":"Ajoute les contraintes que l'esquisse a presque déjà, comme horizontale, parallèle ou coïncidente, puis la cote jusqu'à ce qu'elle soit entièrement définie. À utiliser pour verrouiller en une étape une esquisse dessinée approximativement.",
"help.sketch.auto_constrain_from_datum":"Fonctionne comme Contraintes automatiques, mais mesure les positions depuis un point de référence que vous choisissez plutôt que depuis l'origine. À utiliser lorsque la pièce est tracée à partir d'un point de référence, comme un coin ou un perçage.",
"help.sketch.blend_curve":"Relie les extrémités de deux courbes par une spline douce, tangente aux deux, ou aussi continue en courbure si vous le choisissez. À utiliser pour combler un écart entre des courbes sans cassure.",
"help.sketch.break":"Scinde une courbe en morceaux là où d'autres courbes la croisent, ou en des points que vous placez dessus. À utiliser lorsqu'une partie d'une courbe a besoin de sa propre contrainte ou doit être supprimée seule.",
"help.sketch.cancel":"Quitte l'esquisse et abandonne tout ce qui a été modifié depuis sa création ou son ouverture pour modification. Annuler rétablit les modifications.",
"help.sketch.centerline":"Bascule des lignes entre lignes normales et lignes d'axe, des axes que les profils ignorent. Utilisez une ligne d'axe comme axe pour une révolution, une symétrie ou une contrainte de symétrie.",
"help.sketch.chamfer.distance_angle":"Biseaute le coin entre deux lignes, défini par une distance le long de la première ligne et un angle. À utiliser lorsqu'un dessin donne le chanfrein sous forme de longueur et d'angle, comme 2 mm × 30°.",
"help.sketch.chamfer.equal_distance":"Biseaute le coin entre deux lignes sur la même distance le long des deux. À utiliser pour le chanfrein habituel à 45° sur un contour.",
"help.sketch.chamfer.two_distance":"Biseaute le coin entre deux lignes, défini par une distance distincte le long de chaque ligne. À utiliser pour des chanfreins qui ne sont pas à 45°, donnés sous forme de deux longueurs.",
"help.sketch.circle.center":"Dessine un cercle à partir de son centre et de son diamètre. À utiliser pour des perçages, des bossages et d'autres formes rondes dont le centre est connu.",
"help.sketch.circle.three_point":"Dessine un cercle passant par trois points. À utiliser lorsque le cercle doit passer par des points donnés, par exemple de la géométrie existante.",
"help.sketch.circle.three_tangent":"Dessine un cercle qui touche trois lignes, cercles ou arcs. À utiliser pour inscrire un cercle dans l'espace entre trois courbes, comme le cercle inscrit d'un triangle.",
"help.sketch.circle.two_point":"Dessine un cercle à partir des deux extrémités de son diamètre. À utiliser lorsque les points du bord du cercle sont connus plutôt que son centre.",
"help.sketch.circle.two_tangent":"Dessine un cercle de taille donnée qui touche deux lignes, cercles ou arcs. À utiliser pour un arrondi de rayon fixe entre deux courbes.",
"help.sketch.conic":"Dessine une courbe conique entre deux extrémités, façonnée par un point sommet et une valeur rho. À utiliser pour des transitions douces dont vous voulez ajuster la tension, de presque plate à presque anguleuse.",
"help.sketch.constrainer":"Applique la contrainte qu'une ou deux courbes choisies ont presque déjà, comme horizontale, parallèle, tangente ou égale. À utiliser pour mettre au propre une esquisse à main levée, une relation à la fois.",
"help.sketch.constraint.coincident":"Place un point sur un autre point, une courbe ou un axe d'esquisse. À utiliser pour fermer les écarts d'un profil ou pour poser un point sur une ligne.",
"help.sketch.constraint.collinear":"Place deux lignes sur une même droite. À utiliser pour aligner des arêtes interrompues, comme les deux côtés d'une encoche.",
"help.sketch.constraint.concentric":"Donne le même centre à deux cercles ou arcs. À utiliser pour des bagues, des lamages et des arbres à épaulements.",
"help.sketch.constraint.curvature":"Fait que deux courbes qui se rejoignent en une extrémité continuent avec la même courbure (G2). À utiliser lorsqu'un raccord tangent n'est pas assez doux, par exemple sur des surfaces visibles.",
"help.sketch.constraint.equal":"Donne la même longueur à des lignes, ou le même rayon à des cercles et arcs. À utiliser pour qu'une seule cote pilote plusieurs formes identiques.",
"help.sketch.constraint.fix":"Fixe des points ou des courbes là où ils sont, ou les libère. À utiliser pour la géométrie qui ne doit pas bouger lorsque vous faites glisser ou résolvez l'esquisse.",
"help.sketch.constraint.horizontal_vertical":"Rend une ligne, ou la ligne entre deux points, horizontale ou verticale, selon la plus proche. À utiliser pour redresser un contour sur les axes de l'esquisse.",
"help.sketch.constraint.midpoint":"Place un point au milieu d'une ligne, ou fait coïncider les milieux de deux lignes. À utiliser pour centrer de la géométrie sur une arête.",
"help.sketch.constraint.parallel":"Rend deux lignes parallèles. À utiliser pour des côtés qui doivent rester parallèles lorsque d'autres cotes changent.",
"help.sketch.constraint.perpendicular":"Fait se rencontrer deux lignes à angle droit. À utiliser pour des coins d'équerre entre des lignes qui ne sont pas sur les axes de l'esquisse.",
"help.sketch.constraint.polygon":"Transforme une chaîne fermée de lignes en polygone régulier: côtés égaux, avec tous les coins sur un même cercle. À utiliser pour rendre régulier un polygone dessiné à main levée et le garder ainsi.",
"help.sketch.constraint.symmetry":"Fait que deux points ou courbes sont symétriques par rapport à une ligne ou à un point. À utiliser pour garder un profil symétrique lorsque vous modifiez un côté.",
"help.sketch.constraint.tangent":"Fait que deux courbes se touchent en tangence, comme une ligne et un arc. À utiliser pour des raccords doux sans cassure.",
"help.sketch.construction":"Bascule des courbes entre géométrie normale et géométrie de construction, que les profils ignorent. Utilisez les courbes de construction comme aides pour l'implantation, les références et les cotes.",
"help.sketch.construction_line":"Crée une droite de construction infinie passant par deux points. À utiliser pour structurer une esquisse sans diviser les profils.",
"help.sketch.construction_line.angle":"Crée une droite de construction infinie inclinée d'un angle par rapport à l'axe X de l'esquisse. Choisissez le point puis saisissez l'angle, ou choisissez sa direction.",
"help.sketch.construction_line.bisector":"Sélectionnez deux lignes droites sécantes de l'esquisse, puis choisissez l'une des deux bissectrices. Le résultat suit les lignes dont il provient.",
@@ -1415,11 +1572,71 @@
"help.sketch.construction_line.tangent_external":"Sélectionnez un cercle ou un arc de cercle, puis un point extérieur et une solution de tangente. Les aperçus n'affichent que les points de contact situés sur l'arc dessiné.",
"help.sketch.construction_line.tangent_two":"Sélectionnez deux cercles ou arcs de cercle, puis choisissez une tangente commune dans l'aperçu. Les points de contact doivent se trouver sur les courbes dessinées.",
"help.sketch.construction_line.vertical":"Crée une droite de construction verticale infinie passant par un point. Sa contrainte verticale est conservée lors des modifications ultérieures.",
"help.sketch.copy":"Copie les courbes et points d'esquisse sélectionnés, avec les contraintes et cotes qui les relient. Collez-les dans cette esquisse ou dans une autre.",
"help.sketch.create":"Démarre une nouvelle esquisse 2D sur un plan ou sur une face plane du modèle. Toute extrusion, révolution et balayage commence par une esquisse.",
"help.sketch.cut":"Copie la géométrie d'esquisse sélectionnée et la supprime de l'esquisse, en une seule étape d'annulation. Collez-la ailleurs dans cette esquisse ou dans une autre.",
"help.sketch.dimension":"Ajoute une cote pilotante: une longueur, une distance, un angle, un rayon ou un diamètre, selon ce que vous choisissez. Saisissez une valeur ou un nom de paramètre, et l'esquisse la suit.",
"help.sketch.edit":"Ouvre une esquisse existante pour la modifier. Les fonctions construites dessus se mettent à jour lorsque vous terminez l'esquisse.",
"help.sketch.ellipse":"Dessine une ellipse à partir de son centre, de l'extrémité de son grand axe et d'un point côté petit axe. À utiliser pour des ouvertures ovales, des cames et d'autres formes rondes allongées.",
"help.sketch.equation_curve":"Dessine une courbe à partir de formules: x(t) et y(t), ou y = f(x), sur un intervalle. Les formules peuvent utiliser des paramètres et la courbe les suit: à utiliser pour une sinusoïde, une spirale ou la développante d'une dent d'engrenage.",
"help.sketch.extend":"Prolonge une ligne ou un arc jusqu'à la courbe la plus proche sur son chemin, ou fait croître deux courbes jusqu'à ce qu'elles se rejoignent. À utiliser pour fermer des jeux dans un profil après ajustement ou modification.",
"help.sketch.fillet":"Arrondit le coin où deux lignes ou arcs se rejoignent par un arc de rayon donné. Plusieurs coins arrondis ensemble partagent un même rayon.",
"help.sketch.finish":"Quitte l'esquisse et revient au modèle. Ses profils fermés sont alors prêts pour Extrusion, Révolution et d'autres fonctions.",
"help.sketch.finish_auto_constrain":"Lance Contraintes automatiques sur l'esquisse, puis la termine. À utiliser pour laisser une esquisse entièrement définie en une seule étape.",
"help.sketch.fit_curves_to_section":"Coupe un corps maillé ou solide avec le plan d'esquisse et ajuste des lignes et des arcs à la section. À utiliser pour reconstruire une pièce numérisée ou importée sous forme d'esquisse modifiable.",
"help.sketch.include_3d":"Amène des arêtes du modèle, des sommets et des courbes d'autres esquisses dans cette esquisse comme références liées, en aplatissant sur son plan celles qui en sont hors. À utiliser pour construire à partir d'une géométrie qui n'est pas dans le plan d'esquisse.",
"help.sketch.infinite":"Bascule des lignes entre lignes normales et lignes de construction infinies qui traversent toute la vue. À utiliser comme références d'implantation qui ne s'arrêtent jamais trop court.",
"help.sketch.insert_dxf":"Lit les courbes d'un dessin DXF dans une esquisse, mises à l'échelle, tournées et placées comme vous le définissez. À utiliser pour construire à partir d'un dessin 2D d'un autre logiciel, comme un contour de découpe laser.",
"help.sketch.insert_svg":"Lit les tracés d'un dessin SVG dans une esquisse, mis à l'échelle, tournés et placés comme vous le définissez. À utiliser pour transformer un logo ou un contour vectoriel en courbes que vous pouvez extruder.",
"help.sketch.inspect":"Ouvre un rapport sur l'esquisse ouverte: combien de degrés de liberté il reste et si elle est entièrement contrainte. À utiliser pour savoir ce qui bouge encore avant de terminer l'esquisse.",
"help.sketch.intersect":"Ajoute les courbes ou points où des corps, faces, arêtes ou d'autres esquisses traversent le plan d'esquisse. Ils restent liés et suivent le modèle lorsqu'il change.",
"help.sketch.intersection_curve":"Crée des courbes 3D là où deux corps ou faces se rencontrent, liées à eux. À utiliser comme trajectoires ou rails guides qui suivent le modèle.",
"help.sketch.isoparametric_curve":"Crée une courbe 3D le long de la direction U ou V d'une face, par un point que vous choisissez, liée à la face. À utiliser comme trajectoire ou ligne de partage qui suit la surface.",
"help.sketch.line":"Dessine des lignes connectées point par point, en chaîne ouverte ou en contour fermé. C'est l'outil de base de la plupart des profils.",
"help.sketch.line.midpoint":"Dessine une ligne de son milieu vers une extrémité, l'autre extrémité étant son symétrique. À utiliser pour des lignes centrées sur un point, comme une arête symétrique.",
"help.sketch.line3d":"Dessine des lignes droites connectées entre des points de l'espace, avec Esquisse 3D activée. À utiliser pour des trajectoires et des structures qui sortent du plan d'esquisse.",
"help.sketch.mirror":"Symétrise des courbes et points d'esquisse par rapport à une ligne ou un axe et ajoute des contraintes de symétrie. À utiliser pour dessiner la moitié d'un profil symétrique et le compléter.",
"help.sketch.move":"Déplace ou fait tourner des courbes et points d'esquisse, ou une copie. À utiliser pour repositionner de la géométrie en gardant sa forme et ses contraintes.",
"help.sketch.offset":"Crée une copie d'une chaîne de courbes à une distance donnée, d'un côté ou des deux. À utiliser pour des parois, des contours et des jeux; la distance reste une cote modifiable.",
"help.sketch.paste":"Colle dans l'esquisse active la géométrie d'esquisse copiée ou coupée. Placez-la en un point ou décalez-la d'une valeur.",
"help.sketch.pattern.circular":"Copie la géométrie d'esquisse autour d'un centre, sur un cercle complet ou un angle donné. À utiliser pour des cercles de perçages, des rayons et des dents.",
"help.sketch.pattern.rectangular":"Copie la géométrie d'esquisse en lignes et colonnes à des espacements donnés. À utiliser pour des grilles de trous, de rainures ou d'aérations.",
"help.sketch.point":"Place un point d'esquisse. À utiliser comme référence pour des cotes, des contraintes, des centres de perçage ou des fonctions ultérieures.",
"help.sketch.point3d":"Place un point dans l'espace, avec Esquisse 3D activée. À utiliser comme référence pour des courbes et trajectoires 3D.",
"help.sketch.polygon.circumscribed":"Dessine un polygone régulier autour d'un cercle, dimensionné du centre au milieu d'un côté. À utiliser lorsque la largeur sur plats est connue, comme pour un écrou hexagonal.",
"help.sketch.polygon.edge":"Dessine un polygone régulier à partir des deux extrémités d'un côté. À utiliser lorsque la longueur et la position d'un côté sont connues.",
"help.sketch.polygon.inscribed":"Dessine un polygone régulier à l'intérieur d'un cercle, dimensionné du centre à un coin. À utiliser lorsque la dimension sur coins est connue.",
"help.sketch.project":"Amène des arêtes du modèle, des faces, des sommets et des courbes d'autres esquisses dans cette esquisse, projetés sur son plan. Ils restent liés et suivent le modèle lorsqu'il change.",
"help.sketch.project_to_surface":"Projette des courbes d'autres esquisses selon la normale de cette esquisse sur une face, sous forme de courbes 3D liées. À utiliser pour poser un logo, une ligne de partage ou une trajectoire sur une surface courbe.",
"help.sketch.rectangle.center":"Dessine un rectangle à partir de son centre et d'un coin. À utiliser pour des contours centrés sur un point, comme l'origine.",
"help.sketch.rectangle.rounded":"Dessine un rectangle dont les quatre coins sont arrondis au même rayon. À utiliser pour des plaques, des couvercles et des ouvertures à coins arrondis.",
"help.sketch.rectangle.three_point":"Dessine un rectangle à partir d'un côté et d'un point du côté opposé. À utiliser pour des rectangles inclinés par rapport aux axes de l'esquisse.",
"help.sketch.rectangle.two_point":"Dessine un rectangle à partir de deux coins opposés. À utiliser pour les contours de plaques, de blocs et de poches.",
"help.sketch.scale":"Met à l'échelle des courbes et points d'esquisse selon un facteur autour d'un point de base. À utiliser pour redimensionner une partie d'une esquisse sans la redessiner.",
"help.sketch.slot.arc_center":"Dessine une rainure courbe de largeur donnée le long d'un arc défini par son centre, son début et sa fin. À utiliser pour des rainures de réglage autour d'un pivot.",
"help.sketch.slot.arc_three_point":"Dessine une rainure courbe de largeur donnée le long d'un arc passant par trois points. À utiliser lorsque le tracé de la rainure doit passer par des points donnés.",
"help.sketch.slot.center_point":"Dessine une rainure droite de largeur donnée de son centre au centre d'un arc d'extrémité. À utiliser pour des rainures centrées sur un point.",
"help.sketch.slot.center_to_center":"Dessine une rainure droite de largeur donnée entre les centres de ses deux arcs d'extrémité. À utiliser pour des rainures cotées de centre à centre, comme les rainures de réglage de vis.",
"help.sketch.slot.overall":"Dessine une rainure droite de largeur donnée d'une extrémité extérieure à l'autre. À utiliser lorsque c'est la longueur hors tout de la rainure qui compte.",
"help.sketch.spline.control_point":"Dessine une spline cubique façonnée par des points de contrôle qu'elle ne traverse pas. À utiliser pour des courbes douces et fluides que vous façonnez en déplaçant les points.",
"help.sketch.spline.control_point_5":"Dessine une spline de degré 5 façonnée par des points de contrôle. À utiliser lorsque des courbes doivent se raccorder avec une courbure plus douce, par exemple sur des surfaces de style visibles.",
"help.sketch.spline.fit_point":"Dessine une spline douce qui passe par chaque point que vous placez, ouverte ou fermée. À utiliser pour décalquer une forme à travers des points connus.",
"help.sketch.spline3d":"Dessine une courbe douce dans l'espace par des points, avec Esquisse 3D activée. À utiliser pour des trajectoires de balayage et des cheminements de câbles qui sortent du plan d'esquisse.",
"help.sketch.spun_profile":"Crée dans le plan d'esquisse le contour qu'un corps balaie en tournant autour d'un axe. À utiliser pour obtenir la silhouette d'une pièce tournée pour une révolution ou un dessin.",
"help.sketch.text":"Écrit du texte dans l'esquisse avec une police, une hauteur et un angle au choix; ses mots peuvent suivre des paramètres. À extruder ou embosser pour des étiquettes et des lettrages.",
"help.sketch.transform":"Met à l'échelle, fait tourner et déplace de la géométrie d'esquisse autour d'un centre en une seule étape. À utiliser pour repositionner et redimensionner une sélection d'un coup.",
"help.sketch.trim":"Supprime le morceau d'une courbe entre les croisements les plus proches autour de l'endroit où vous cliquez. À utiliser pour nettoyer des lignes qui se chevauchent et obtenir un profil fermé.",
"help.solid.align":"Déplace les corps sélectionnés pour qu'un de leurs points, faces ou plans rejoigne un point, une face ou un plan ailleurs. À utiliser pour poser une pièce contre une autre sans mesurer le décalage.",
"help.solid.boundary_fill":"Crée des solides à partir des régions délimitées par des corps outils qui se chevauchent, en ne remplissant que les régions que vous choisissez. À utiliser pour construire une forme à partir de l'espace que plusieurs corps délimitent ensemble.",
"help.solid.bounding_solid":"Crée un parallélépipède qui englobe les corps sélectionnés, avec une marge facultative. À utiliser pour voir l'encombrement d'une pièce, ou comme brut dans lequel elle est usinée.",
"help.solid.box":"Crée un parallélépipède à partir d'une longueur, d'une largeur et d'une hauteur, depuis un coin ou centré sur un point. À utiliser pour un bloc rapide, un volume provisoire ou un corps dans lequel tailler des fonctions.",
"help.solid.chamfer":"Coupe les arêtes sélectionnées par un biseau plat de la distance indiquée. À utiliser pour casser des arêtes vives ou faciliter l'entrée d'une goupille ou d'une vis.",
"help.solid.coil":"Crée un corps hélicoïdal, comme un ressort, à partir d'un diamètre, d'un nombre de tours, d'une hauteur ou d'un pas et d'une section ronde ou carrée. À utiliser pour des ressorts, des spires et des nervures hélicoïdales.",
"help.solid.combine":"Joint des corps, les retire d'un corps cible ou ne garde que le volume qu'ils ont en commun, et peut conserver les corps outils. À utiliser pour fusionner des pièces, tailler une forme avec une autre ou repérer où deux corps se recouvrent.",
"help.solid.cone":"Crée un cône à partir d'un cercle de base et d'une hauteur, ou un tronc de cône lorsque le sommet a aussi un rayon. À utiliser pour des conicités, des entonnoirs, des fraisages et des pointes.",
"help.solid.cylinder":"Crée un cylindre à partir d'un rayon ou d'un diamètre et d'une hauteur, posé sur un point selon un axe. À utiliser pour des arbres, des goupilles, des bossages et des bruts ronds.",
"help.solid.draft":"Incline les faces sélectionnées de l'angle indiqué, mesuré depuis un plan neutre. À utiliser sur les pièces moulées ou coulées pour qu'elles sortent du moule.",
"help.solid.emboss":"Fait saillir des profils d'esquisse, comme du texte ou un logo, hors d'une face, ou les enfonce dedans. À utiliser pour des lettrages, des étiquettes et des marquages sur des faces planes ou rondes.",
"help.solid.extrude":"Pousse le profil d'une esquisse en 3D sur une distance, en ajoutant ou en retirant de la matière. À utiliser pour transformer un contour plat en bloc, en bossage ou en poche.",
"help.solid.fillet":"Arrondit les arêtes sélectionnées par un raccord circulaire lisse du rayon indiqué. À utiliser pour adoucir des arêtes vives par souci de solidité, de confort ou d'aspect.",
"help.solid.hole":"Perce un trou rond du diamètre indiqué en un point choisi d'une face. À utiliser pour les passages de vis, les goupilles et autres ouvertures rondes simples.",
@@ -1428,20 +1645,60 @@
"help.solid.move":"Déplace ou fait tourner les corps sélectionnés, ou une copie, selon la distance et l'angle indiqués. À utiliser pour repositionner un corps ou en créer un second ailleurs.",
"help.solid.offset_face":"Pousse les faces sélectionnées vers l'intérieur ou l'extérieur de la distance indiquée, et les faces voisines suivent. À utiliser pour épaissir une paroi, creuser une poche ou rehausser un bossage sans modifier l'esquisse.",
"help.solid.pattern.circular":"Répète les objets sélectionnés autour d'un axe, selon le nombre et l'angle total indiqués. À utiliser pour les cercles de perçages, rayons, ailettes et dents.",
"help.solid.pattern.path":"Copie des fonctions ou des corps le long d'une trajectoire d'esquisse, selon un nombre et un espacement. À utiliser pour des trous le long d'une arête courbe ou des pièces le long d'un rail.",
"help.solid.pattern.rectangular":"Répète les objets sélectionnés dans une ou deux directions, selon le nombre et l'espacement indiqués. À utiliser pour les rangées et grilles de trous, nervures, goupilles ou pieds.",
"help.solid.pipe":"Crée un tube rond le long d'une trajectoire de courbes d'esquisse, plein ou creux avec une épaisseur de paroi. À utiliser pour des tubes, des fils, des câbles et des rails.",
"help.solid.press_pull":"Ajoute ou retire de la matière quand on fait glisser une face, ou arrondit des arêtes quand on les fait glisser. À utiliser pour des modifications rapides directement sur le modèle.",
"help.solid.remove":"Retire les corps sélectionnés de la conception à partir de ce point de la chronologie ; les étapes précédentes les gardent. À utiliser pour écarter un corps d'aide, comme un outil de découpe devenu inutile.",
"help.solid.replace_face":"Amène les faces planes sélectionnées sur un plan ou une face parallèle, et le corps s'allonge ou se raccourcit pour la rejoindre. À utiliser pour mettre une face au ras d'une autre pièce ou d'un plan de construction.",
"help.solid.revolve":"Fait tourner le profil d'une esquisse autour d'un axe pour obtenir un solide de révolution. À utiliser pour les arbres, boutons, bols et toute pièce ronde autour d'une ligne centrale.",
"help.solid.rib":"Ajoute une paroi mince le long d'une courbe d'esquisse ouverte, prolongée jusqu'aux faces suivantes du corps. À utiliser pour rigidifier des parois et des coins, par exemple dans des pièces moulées ou imprimées.",
"help.solid.scale":"Agrandit ou réduit les corps sélectionnés d'un facteur, identique dans toutes les directions ou propre à chaque axe. À utiliser pour redimensionner une forme importée ou compenser un retrait.",
"help.solid.shell":"Évide un solide en laissant des parois de l'épaisseur indiquée, et peut ouvrir les faces choisies. À utiliser pour les boîtes, couvercles et autres pièces à parois minces.",
"help.solid.sphere":"Crée une sphère à partir d'un rayon ou d'un diamètre autour d'un centre. À utiliser pour des billes, des boutons et des extrémités arrondies.",
"help.solid.split_body":"Scinde un corps en corps séparés avec un plan, la face d'un autre corps ou une ligne d'esquisse. À utiliser pour obtenir des pièces imprimées, usinées ou colorées séparément.",
"help.solid.split_face":"Scinde les faces sélectionnées le long d'un plan, de la face d'un autre corps ou de courbes d'esquisse, sans scinder le corps. À utiliser pour donner à une partie de face sa propre dépouille, couleur ou décalage.",
"help.solid.sweep":"Entraîne le profil d'une esquisse le long d'une trajectoire pour obtenir un solide. À utiliser pour les tuyaux, rails, poignées et toute pièce de section constante qui suit une courbe.",
"help.solid.thread":"Ajoute un filetage métrique ISO sur une face cylindrique, soit sous forme de filetage cosmétique, soit taillé dans le corps. À utiliser pour des boulons, des trous taraudés et des pièces vissées imprimées.",
"help.solid.torus":"Crée un anneau à partir d'un grand rayon autour de son axe et d'un petit rayon pour sa section ronde. À utiliser pour des joints toriques, des poignées et des perles rondes.",
"help.solid.web":"Ajoute une paroi mince le long de chaque courbe d'esquisse ouverte, chacune prolongée jusqu'aux faces suivantes du corps. À utiliser pour une grille de parois de soutien à l'intérieur de boîtiers et de plateaux.",
"help.surface.blend":"Crée une surface qui relie les arêtes de deux corps, en tangence ou en continuité de courbure avec les deux. À utiliser pour joindre en douceur deux surfaces à travers un écart.",
"help.surface.boundary":"Crée une surface remplissant une boucle de deux à quatre courbes d'esquisse, ou un réseau de courbes. À utiliser pour des panneaux de forme libre définis par leurs bords.",
"help.surface.extend":"Prolonge une surface au-delà de ses bords, d'une distance ou jusqu'à un plan ou une face. À utiliser pour que des surfaces se chevauchent avant de les ajuster ou de les coudre.",
"help.surface.extrude":"Pousse des courbes ou profils d'esquisse sur une distance pour former une surface, parois seulement, sans fonds. À utiliser pour des parois minces et pour des outils de coupe ou de partage.",
"help.surface.fair":"Lisse l'intérieur de faces de forme libre tandis que leurs bords restent en place. À utiliser pour atténuer les bosses et les reflets ondulés d'une surface.",
"help.surface.loft":"Crée une surface qui passe par deux sections ou plus dans l'ordre, sans fonds. À utiliser pour des coques et des transitions entre des formes différentes.",
"help.surface.match":"Reconstruit le bord d'une surface pour qu'il rejoigne le bord d'un autre corps, avec une tangence ou une courbure concordante. À utiliser pour fermer en douceur un raccord entre deux surfaces.",
"help.surface.offset":"Crée une copie de faces à une distance le long de leurs normales, sous forme de nouveau corps surfacique. À utiliser pour des peaux, des jeux ou l'autre côté d'une paroi.",
"help.surface.patch":"Remplit une région d'esquisse ou une boucle fermée d'arêtes par une face, plane ou courbe et douce. À utiliser pour boucher des trous dans un corps surfacique.",
"help.surface.reverse_normal":"Retourne des faces d'un corps surfacique, de sorte que leur côté extérieur soit orienté dans l'autre sens. À utiliser avant d'épaissir ou de coudre lorsque les faces pointent vers l'intérieur.",
"help.surface.revolve":"Fait tourner des courbes ou profils d'esquisse autour d'un axe pour former une surface, sans fonds. À utiliser pour des coques rondes comme des abat-jour, des bols et des buses.",
"help.surface.ruled":"Crée une bande de droites à partir d'une chaîne d'arêtes, selon la normale de la face, la tangente ou un angle. À utiliser pour des parois de dépouille, des dégagements et des surfaces de joint.",
"help.surface.stitch":"Coud des corps surfaciques le long de leurs arêtes communes, en un solide lorsqu'ils se referment. À utiliser pour transformer un ensemble de surfaces en un seul corps.",
"help.surface.sweep":"Déplace des courbes ou profils d'esquisse le long d'une trajectoire pour former une surface, sans fonds. À utiliser pour des gouttières, des moulures et d'autres formes minces qui suivent une trajectoire.",
"help.surface.thicken":"Donne une épaisseur à un corps surfacique et le transforme en solide. À utiliser pour fabriquer des pièces imprimables ou usinables à partir de surfaces.",
"help.surface.trim":"Coupe une surface avec un plan, une autre surface ou des courbes d'esquisse, et garde le côté que vous choisissez. À utiliser pour ajuster des surfaces à leur forme avant de les coudre.",
"help.surface.unstitch":"Sépare des faces d'un corps en corps surfaciques distincts; un solide se décompose en surfaces. À utiliser pour retravailler des faces isolées d'un corps.",
"help.surface.untrim":"Supprime des trous d'une face, ou rétablit son contour extérieur aux limites naturelles de la surface. À utiliser pour retrouver la surface complète après un ajustement.",
"help.third_party":"Licences tierces",
"help.timeline.compute_all":"Recalcule toutes les fonctions de la chronologie depuis le début. À utiliser pour rafraîchir le modèle et voir quelles fonctions échouent.",
"help.timeline.delete":"Supprime les fonctions sélectionnées de la chronologie ; supprimer une esquisse supprime aussi les fonctions construites à partir d'elle. À utiliser pour retirer une étape devenue inutile.",
"help.timeline.dependents":"Liste les fonctions qui seraient supprimées avec une fonction, et celles qui échoueraient sans elle. À utiliser avant de supprimer ou de modifier une fonction.",
"help.timeline.play":"Rejoue les fonctions restantes une par une, avec une pause d'une demi-seconde après chaque reconstruction. Relancez cette commande ou appuyez sur Échap pour arrêter; Aller à la fin saute immédiatement.",
"help.view.apply":"Oriente la vue selon une direction standard comme face, dessus ou iso, ou selon une vue nommée enregistrée. À utiliser pour regarder le modèle sous un angle fixe.",
"help.view.delete":"Supprime une vue nommée enregistrée. Le modèle n'est pas modifié.",
"help.view.fit":"Zoome et déplace la vue pour que tout le modèle, ou la sélection, remplisse la vue. À utiliser lorsque le modèle est sorti du champ.",
"help.view.grid":"Affiche ou masque la grille dans la vue 3D. À utiliser comme repère de taille et d'orientation pendant la modélisation.",
"help.view.ground_shadow":"Affiche ou masque l'ombre du modèle sur le sol. À utiliser pour juger plus facilement la hauteur et la position.",
"help.view.home":"Remet la vue dans la direction d'accueil et ajuste le modèle. À utiliser pour revenir rapidement à une vue connue.",
"help.view.list":"Liste les vues nommées enregistrées dans la conception. À utiliser pour retrouver une vue enregistrée plus tôt.",
"help.view.navigate":"Fait tourner, déplace ou zoome la vue par étapes, comme un quart de tour à gauche. À utiliser pour déplacer la caméra avec précision plutôt qu'en faisant glisser.",
"help.view.navigation_bar":"Affiche ou masque la barre de navigation en bas de la vue 3D. Masquez-la pour gagner de la place, affichez-la pour accéder aux outils de vue à la souris.",
"help.view.rename":"Donne un nouveau nom à une vue nommée enregistrée. La vue elle-même reste inchangée.",
"help.view.save":"Enregistre la position actuelle de la caméra comme vue nommée dans la conception. À utiliser pour revenir plus tard au même angle, par exemple pour des captures d'écran.",
"help.view.spin":"Fait orbiter la vue autour du modèle en continu jusqu'au prochain clic ou à la prochaine touche. À utiliser pour présenter un modèle sous tous les angles.",
"help.view.tool":"Verrouille un outil de caméra, orbite, déplacement ou zoom, de sorte que faire glisser avec le bouton gauche de la souris déplace la vue jusqu'à ce que vous le désactiviez. À utiliser sur un trackpad ou sans bouton central de souris.",
"help.view.visual_style":"Change le mode d'affichage du modèle: ombré avec ou sans arêtes, filaire, ou avec arêtes cachées. Utilisez le filaire pour voir à l'intérieur, l'ombré pour un rendu net.",
"history.sketch_under_constrained":"Sous-contraint ({count} degrés de liberté)",
"history.sketch_under_constrained_one":"Sous-contraint ({count} degré de liberté)",
"hole_presets.confirm_delete":"Confirmer la suppression",
"parts.family.washer_uss":"Rondelle plate, USS (large)",
"parts.holes":"Trous (facultatif)",
"parts.placement_hint":"choisissez un ou plusieurs trous pour y loger une pièce chacun, ou OK la place à l'origine",
"parts.system":"Système d'unités",
"parts.system.inch":"Pouces",
"parts.system.metric":"Métrique",
"pattern.alignment_2":"Alignement 2",
"pattern.alignment_hint":"La quantité inclut l’original. Le centrage répartit les copies de chaque côté ; si la quantité est paire, l’inversion choisit le côté qui reçoit la copie supplémentaire.",
"pattern.direction_1":"Direction 1",
@@ -1851,6 +2119,8 @@
"prefs.bottom_centre":"Bas centre",
"prefs.bottom_right":"Bas droite",
"prefs.browser":"Navigateur",
"prefs.browser_components_open":"Composants dépliés au départ",
"prefs.browser_components_open_note":"Chaque composant du navigateur commence déplié, comme avant, au lieu de rester replié jusqu'à ce que vous le dépliiez.",
"prefs.browser_eye_left":"Œil à côté de la flèche de dépliage",
"prefs.browser_eye_left_note":"Les lignes du navigateur affichent leur œil d'affichage et de masquage à côté de la flèche de dépliage, comme avant, au lieu d'une colonne à l'extrémité droite des lignes.",
"prefs.browser_reveal_on_hover":"Révéler au survol",
@@ -1923,6 +2193,8 @@
"prefs.interface_language":"Langue de l'interface",
"prefs.interface_note":"L'apparence de SolidCraft et la place de ses éléments.",
"prefs.interval_minutes":"{n} min",
"prefs.keep_work_on_tab_switch":"Garder dialogues et outils ouverts en changeant de conception",
"prefs.keep_work_on_tab_switch_note":"Chaque onglet de conception garde son dialogue ou son outil ouvert, avec ce que vous y avez sélectionné et saisi, ainsi que son onglet de barre d'outils. Vous les retrouvez en revenant à la conception. Désactivé : changer de conception les annule et affiche l'onglet Modèle.",
"prefs.labels":"Libellés",
"prefs.layout":"Disposition",
"prefs.layout_note":"Compacte: ancre les panneaux aux bords de la fenêtre. La transparence du navigateur est disponible en mode Flottante. Changez le côté de l'assistant dans la page Assistant.",
@@ -1996,6 +2268,8 @@
"prefs.quality_fastest":"le plus rapide",
"prefs.quality_slowest":"le plus lent",
"prefs.quality_smoother":"plus fluide",
"prefs.quick_measure":"Mesure rapide dans le coin de la vue",
"prefs.quick_measure_note":"La taille de la sélection, dans le coin inférieur droit de la vue: la longueur d'une arête, ou Ø et R pour une arête ronde, l'aire d'une face, la position d'un point, la distance et l'angle entre deux éléments, le total de plusieurs arêtes ou faces. Un clic la copie.",
"prefs.render_previous_geometry_budget":"Utiliser l'ancien budget de géométrie de l'aperçu Rendu",
"prefs.render_previous_geometry_budget_help":"Rétablir l'ancienne limite fixe de géométrie (512 Mio sur un ordinateur 64 bits, 128 Mio ailleurs) au lieu du budget basé sur l'appareil.",
"prefs.reports_saved":"Enregistrés: {n}",
@@ -2041,6 +2315,8 @@
"prefs.sketch_tab_always_note":"L'onglet Esquisse reste dans le ruban, juste après Modèle, tant qu'aucune esquisse n'est ouverte. Ses outils de dessin démarrent alors une esquisse sur le plan ou la face sélectionnés, ou sur le plan que vous choisissez ensuite, avec l'outil prêt à l'emploi.",
"prefs.sketch_tracking_guides":"Guides d'alignement sur le centre et le point milieu",
"prefs.sketch_tracking_guides_note":"Survolez le centre d'un cercle ou le point milieu d'un segment droit, puis déplacez le pointeur horizontalement ou verticalement pour afficher un guide pointillé temporaire.",
"prefs.sketch_tracking_points":"Guides d'alignement depuis les extrémités et les coins pendant le dessin",
"prefs.sketch_tracking_points_note":"Quand un outil de dessin attend un point, survoler l'extrémité d'une ligne ou d'un arc, le coin d'un rectangle ou un point libre affiche le même guide pointillé temporaire qu'un centre ou un point milieu. Désactivé : seulement les centres et les points milieux.",
"prefs.sketching":"Esquisse",
"prefs.snap_drawing_note":"Pendant le dessin ou le déplacement d'un point d'esquisse.",
"prefs.source":"Source",
@@ -2057,6 +2333,7 @@
"prefs.status_error":"Erreur",
"prefs.status_selected":"Sélectionné",
"prefs.status_warning":"Avertissement",
"prefs.structure.scale_percent":"{percent} %",
"prefs.supersampling_brief":"Dessine la vue en plus grand puis la réduit par filtrage: très net, mais plus lourd.",
"prefs.theme_import_hint":"Cliquez pour choisir un fichier de thème, déposez-en un ici, ou appuyez sur Ctrl+V (Cmd+V sur Mac) avec un thème copié",
"prefs.theme_option_opacity":"Opacité",
"prefs.theme_option_opacity_help":"Règle l'opacité des panneaux flottants. Un seuil de lisibilité protège le texte placé sur les couleurs de la vue 3D.",
"prefs.theme_option_tab_colours":"Couleurs des onglets",
"prefs.theme_option_tab_colours_help":"Utilise les couleurs de panneau et de vue 3D de ce thème pour chaque onglet du ruban.",
"prefs.theme_option_tab_fade_ms":"Transition des onglets",
"prefs.theme_option_tab_fade_ms_help":"Fait passer progressivement les couleurs du panneau et de la vue 3D au changement d'onglet. Zéro bascule instantanément.",
"prefs.theme_options_badge":"Options",
"prefs.theme_options_more":"Plus · {count}",
"prefs.theme_options_reset":"Réinitialiser",
"prefs.theme_options_unavailable":"Indisponible sur cet appareil",
"prefs.theme_paste":"Coller le thème",
"prefs.theme_paste_none":"Le presse-papiers ne contient aucun thème SolidCraft",
"prefs.timeline_half_hour":"−30 min",
@@ -2089,6 +2376,8 @@
"prefs.under_cursor":"Sous le curseur",
"prefs.units_precision":"Unités et précision",
"prefs.updates":"Mises à jour",
"prefs.value_boxes_in_view":"Afficher les valeurs à côté de leurs poignées dans la vue",
"prefs.value_boxes_in_view_tip":"La valeur d'une commande (distance, rayon…) dans une case à côté de sa poignée, par-dessus le modèle. Désactivé : vous la saisissez dans la fenêtre de la commande, qui prend le clavier après une sélection, et rien ne masque le modèle.",
"prefs.view":"Comportement de la vue",
"prefs.view_confirm_corner":"OK et Annuler dans le coin de la vue",
"prefs.view_confirm_corner_note":"Lorsqu'une boîte de dialogue ou une esquisse est ouverte, une coche et une croix en haut à droite de la vue font la même chose que OK et Annuler, ou terminent et annulent l'esquisse. Le repère de navigation se place en dessous.",
@@ -2098,6 +2387,12 @@
"prefs.viewport_background":"Fond",
"prefs.viewport_background_colour":"Couleur",
"prefs.viewport_background_theme":"Dégradé du thème",
"prefs.viewport_section_status":"Afficher l'état de la coupe dans la vue 3D",
"prefs.viewport_section_status_help":"Affiche le réglage de coupe dans la vue 3D. Échap et le bouton actif du ruban le désactivent. Désactivez cette option pour conserver les contrôles de coupe précédents.",
"prefs.viewport_status_details":"Détails de la vue 3D modifiables",
"prefs.viewport_status_details_help":"Modifie les réglages de l'analyse et de la coupe actives dans des fiches de détails standard. Désactivez cette option pour retrouver les légendes d'analyse en lecture seule et la boîte de dialogue Coupe.",
"prefs.viewport_status_summary":"Regrouper les éléments d'état de la vue 3D",
"prefs.viewport_status_summary_help":"Regroupe trois éléments d'état de la vue 3D ou plus dans un seul badge de synthèse. Désactivez cette option pour garder tous les éléments sur la ligne complète.",
"prefs.wheel":"Molette",
"prefs.wheel_trackpad":"Molette et pavé tactile",
"prefs.workspace":"Espace de travail",
@@ -2976,7 +3271,9 @@
"render.output_ready":"Prêt à lancer le rendu",
"render.output_run_check":"Lancer la vérification",
"render.output_size_limit":"{method}: jusqu'à {dimension} px par côté et {pixels} pixels. Plus grande taille possible: {width} × {height}.",
"render.output_size_method_profile":"Pour un rendu en {width} × {height}, choisissez {method} avec le profil de ressources CPU {profile}, ou une taille plus petite.",
"render.size_presets_pending":"Arrive avec l'éditeur Sortie",
"render.size_preview":"Aperçu",
@@ -3476,6 +3774,24 @@
"sheet.flange_type_contour":"Contour",
"sheet.flange_type_edge":"Arête",
"sheet.no_body":"il n'y a pas de corps de tôlerie: commencez-en un avec Bord tombé > Base, ou transformez une plaque en tôlerie avec Convertir en tôlerie (choisissez sa grande face plane)",
"sheet.personal_rules.confirm_delete":"Confirmer la suppression",
"sheet.personal_rules.delete":"Supprimer",
"sheet.personal_rules.delete_prompt":"Supprimer cette règle personnelle? Les règles déjà présentes dans les conceptions ne changent pas.",
"sheet.personal_rules.full":"La bibliothèque personnelle contient déjà 64 règles.",
"sheet.personal_rules.invalid_name":"Saisissez un nom court, sans saut de ligne ni caractère de contrôle.",
"sheet.personal_rules.invalid_values":"Complétez les valeurs de la règle: chacune doit pouvoir être calculée dans cette conception, avec une épaisseur positive et un facteur K compris entre 0 et 1.",
"sheet.personal_rules.missing":"La règle personnelle sélectionnée n'est plus disponible.",
"sheet.personal_rules.name":"Nom de la règle",
"sheet.personal_rules.name_exists":"Une règle personnelle porte déjà ce nom. Choisissez-en un autre.",
"sheet.personal_rules.name_hint":"Un nom unique",
"sheet.personal_rules.overwrite":"Enregistrer les modifications de la règle personnelle sélectionnée",
"sheet.personal_rules.rename":"Renommer",
"sheet.personal_rules.rule":"Règle personnelle",
"sheet.personal_rules.save":"Enregistrer comme nouvelle",
"sheet.personal_rules.scope":"Enregistrée dans votre profil, pour toutes les conceptions.",
"sheet.personal_rules.select":"Choisir une règle",
"ui.agent_chat_queued_stopped":"En file d'attente (arrêté, non envoyé)",
"ui.agent_chat_refresh":"Actualiser",
"ui.agent_chat_refused":"Interdit à l'agent: {reason}",
"ui.agent_chat_reinstall":"{agent} est installé ({program}), mais n'a pas démarré quand SolidCraft l'a vérifié : {error}\nSon installation est peut-être incomplète, ou prévue pour un autre type d'ordinateur. Réinstallez-le avec `{install}`, vérifiez qu'il affiche sa version dans un terminal, puis cliquez sur Actualiser.",
"ui.agent_chat_remove":"Retirer de la file d'attente",
"ui.agent_chat_remove_file":"Retirer de ce message",
"ui.agent_chat_remove_imported":"Retirer de ce message; la pièce reste dans la conception (Annuler la retire)",
"ui.agent_chat_reply_cut_off":"La réponse a atteint sa longueur maximale avant la fin: elle est peut-être incomplète. Demandez à l'agent de continuer, ou une réponse plus courte.",
"ui.agent_chat_reply_declined":"Le modèle a refusé de répondre à ce message.",
"ui.agent_chat_retry":"Réessayer",
"ui.agent_chat_right":"Droite",
"ui.agent_chat_save":"Enregistrer",
@@ -3876,12 +4193,17 @@
"ui.ai_copy_suffix":"copie",
"ui.ai_custom_url":"URL personnalisée",
"ui.ai_default":"Par défaut",
"ui.ai_edit":"Modifier",
"ui.ai_edit_agent_title":"Modifier l'agent",
"ui.ai_edit_gone":"Cet agent a été retiré : il n'y a rien à enregistrer.",
"ui.ai_edit_tip":"Modifier le nom, la commande ou le point d'accès de cet agent. La clé enregistrée reste masquée.",
"ui.ai_http_busy":"le point d'accès est occupé ou a dépassé sa limite; réessayez plus tard",
"ui.ai_http_key":"le point d'accès a refusé la clé : vérifiez-la dans Préférences › IA",
"ui.ai_http_not_found":"point d'accès ou modèle introuvable: vérifiez l'URL de base et le nom du modèle",
"ui.ai_http_too_large":"la conversation est trop volumineuse pour ce point d'accès ; commencez une nouvelle discussion",
"ui.ai_key":"Clé d'API",
"ui.ai_key_hint":"facultative; conservée dans le trousseau de clés du système",
"ui.ai_key_keep_hint":"laisser vide pour garder la clé enregistrée",
"ui.ai_key_needs_https":"Une clé n'est envoyée qu'en HTTPS, ou vers cet ordinateur.",
"ui.ai_key_note":"Stockée dans le trousseau de clés du système, jamais dans les réglages de SolidCraft. Laisser vide pour un serveur local.",
"ui.ai_keychain_error":"Le trousseau de clés du système a refusé : {error}",
@@ -3913,6 +4235,7 @@
"ui.ai_request_timeout":"Délai d'expiration des requêtes",
"ui.ai_request_timeout_hint":"Durée maximale d'une requête au modèle de ce point d'accès, de 30 s à une heure. Augmentez-la pour un modèle local lent.",
"ui.ai_reset":"Réinitialiser",
"ui.ai_save":"Enregistrer",
"ui.ai_settings":"Réglages IA…",
"ui.ai_show_features":"Afficher les fonctionnalités IA",
"ui.ai_show_features_note":"Le chat de l'agent: un panneau où un agent de programmation que vous utilisez déjà, ou un point d'accès de modèle de votre choix, travaille sur la conception ouverte. Désactivé : ni bouton IA, ni raccourci, ni entrée de menu, ni panneau, et rien n'est recherché ni lancé.",
@@ -4046,10 +4369,15 @@
"ui.construction.reference_hint":"Droite de construction: sélectionnez une ligne droite, puis un point; clic droit pour changer la référence",
"ui.construction.ribbon_label":"Lignes aux.",
"ui.context_menu":"Menu contextuel",
"ui.continuity_crease":"Angle vif",
"ui.continuity_curvature":"Courbure",
"ui.continuity_curvature_change":"Variation de courbure",
"ui.continuity_g0":"G0 angle vif",
"ui.continuity_g1":"G1 tangence",
"ui.continuity_g2":"G2 courbure",
"ui.continuity_gap":"Écart",
"ui.continuity_position":"Position",
"ui.continuity_tangent":"Tangence",
"ui.copy":"Copier",
"ui.corner":"Angle",
"ui.corners":"Angles",
@@ -4086,6 +4414,40 @@
"ui.design_properties.project":"Projet",
"ui.design_properties.revision":"Indice",
"ui.design_saved":"Enregistré dans {path}",
"ui.details_access_caption":"Les faces indiquent si un outil peut les atteindre depuis la direction choisie.",
"ui.details_angle":"Angle",
"ui.details_continuity_caption":"Modifie la jonction sélectionnée. Les autres jonctions gardent leurs propres réglages.",
"ui.details_continuity_stale":"Géométrie antérieure: relancez l'analyse pour modifier ou cadrer cette jonction.",
"ui.details_copy_list":"Copier la liste",
"ui.details_curvature":"Tolérance de courbure",
"ui.details_curvature_caption":"Les faces sont colorées selon leur rayon de courbure local.",
"ui.details_direction":"Direction de l'outil",
"ui.details_draft_caption":"Les faces sont colorées selon leur angle avec la direction de démoulage.",
"ui.details_edit_seam":"Modifier la jonction",
"ui.details_fixture":"Spécimen de composant — données d'exemple uniquement",
"ui.details_fixture_caption":"Spécimen de composant avec des valeurs d'illustration; ce n'est pas un résultat du modèle.",
"ui.details_fixture_problem":"Exemple de constat signalant un problème",
"ui.details_fixture_readout":"Exemple de valeur mesurée",
"ui.details_flip":"Inverser",
"ui.details_gap":"Écart",
"ui.details_hatch":"Hachurer les faces coupées",
"ui.details_jump":"Saut de courbure",
"ui.details_key":"Légende",
"ui.details_offset":"Décalage",
"ui.details_plane":"Plan",
"ui.details_pull":"Direction de démoulage",
"ui.details_radius":"Rayon",
"ui.details_readout":"Valeur affichée",
"ui.details_samples":"Échantillons",
"ui.details_seam":"{body} · Arête {edge}",
"ui.details_settings":"Réglages",
"ui.details_sharp_gap":"Vive ou ouverte",
"ui.details_show_all":"Tout afficher ({count})",
"ui.details_smooth":"Lisse",
"ui.details_stripes":"Bandes",
"ui.details_target":"Cadrer la géométrie",
"ui.details_worst_seams":"Pires jonctions",
"ui.details_zebra_caption":"Les bandes réfléchies montrent la régularité du raccord entre les faces.",
"ui.diameter":"Diamètre",
"ui.dimension":"Cote",
"ui.direct_interaction":"Interaction directe",
@@ -4146,6 +4508,7 @@
"ui.equation_y_of_x":"y(x)",
"ui.equivalent_radius":"Rayon équivalent",
"ui.expand":"Développer",
"ui.explode_needs_two_components":"La vue éclatée écarte les composants les uns des autres : la conception doit en contenir au moins deux (Nouveau composant, Insérer une conception ou Créer des composants à partir des corps)",
"ui.exportDxf":"Exporter en DXF…",
"ui.export_ellipsis_keymap":"Exporter…",
"ui.export_keymap_tip":"Raccourcis, favoris de la boîte S et barre d'outils, dans un fichier",
@@ -4306,6 +4669,7 @@
"ui.insert_design.saved_file":"{name} contient des modifications non enregistrées; c'est donc son fichier enregistré qui a été inséré. Enregistrez-le, puis utilisez Mettre à jour les liens pour intégrer les modifications.",
"ui.insert_design.unsaved":"Modifications non enregistrées",
"ui.inspect":"Inspecter",
"ui.instances":"Instances",
"ui.intersect":"Intersection",
"ui.isolate":"Isoler",
"ui.join":"Joindre",
@@ -4408,6 +4772,7 @@
"ui.part_size_shared":"Reconstruit la pièce en remplaçant les entités ajoutées. Toutes les occurrences de ce composant sont mises à jour.",
"ui.paste":"Coller",
"ui.path":"Trajectoire",
"ui.pattern_object_type_tip":"Corps : formes pleines, choisies dans la vue ou le Navigateur ; chacun est copié en entier.\nFonctions : étapes de l'Historique, comme une extrusion ou un perçage, choisies dans l'Historique ou sur une face qu'elles ont créée ; l'étape est répétée.\nUne esquisse n'est ni l'un ni l'autre : répétez ses courbes avec la Répétition ou la Symétrie de l'esquisse, ou extrudez-la d'abord.",
"ui.pattern_on_path":"Répétition sur trajectoire",
"ui.perforate_margin_default":"depuis le diamètre",
"ui.perforate_pitch":"Pas",
@@ -4453,9 +4818,9 @@
"ui.polygon":"Polygone",
"ui.preferences":"Préférences",
"ui.press_a_key":"appuyez sur une touche…",
"ui.print_face_body_not_sent":"Le corps de cette face n’est pas envoyé : ajoutez-le d’abord à Corps",
"ui.print_face_cleared":"{body} : face d’impression effacée",
"ui.print_face_input":"Face d’impression",
"ui.print_face_one_body":"Une face d’impression appartient à un seul corps : envoyez ce corps seul pour la modifier",
"ui.print_face_pick":"Sélectionnez une face plane d’un corps solide pour en faire la face d’impression",
"ui.print_face_set":"{body} : face d’impression définie ; Envoyer au slicer pose le corps sur cette face",
"ui.profile":"Profil",
@@ -4473,6 +4838,7 @@
"ui.properties.inertia_y":"Iyx, Iyy, Iyz",
"ui.properties.inertia_z":"Izx, Izy, Izz",
"ui.properties.measuring":"Mesure en cours…",
"ui.properties.measuring_bodies":"Mesure en cours… {done} corps sur {total}",
"ui.properties.measuring_failed":"La mesure s'est arrêtée avant la fin.",
"ui.properties.principal_axis":"Axe principal {number}",
"ui.viewport_status_summary_heading":"Dans cette vue",
"ui.viewport_status_summary_label":"{name} et {count} autres éléments",
"ui.viewport_status_summary_more":"+{count}",
"ui.viewport_theme_follow":"Suivre le thème",
"ui.visual_shaded_hidden_edges":"Ombré avec arêtes cachées",
"ui.visual_shaded_with_edges":"Ombré avec arêtes",
@@ -4732,7 +5111,7 @@
"update.check_unavailable":"La recherche de mises à jour n’est pas disponible pour cette installation.",
"update.checking":"Vérification…",
"update.copy":"Copier",
"update.dmg_opened":"L'image disque est ouverte et vérifiée: faites glisser SolidCraft dans Applications en remplaçant l'ancienne copie, puis redémarrez SolidCraft.",
"update.dmg_opened":"L'image disque est ouverte et vérifiée: quittez SolidCraft, faites glisser le nouveau SolidCraft dans Applications en remplaçant l'ancienne copie, puis rouvrez SolidCraft.",
"update.download":"Télécharger",
"update.download_open":"Télécharger et ouvrir",
"update.downloading":"Téléchargement et vérification… {done} sur {total} Mo",
"Reopen the designs that were open when SolidCraft was last closed":"지난번에 열려 있던 디자인 다시 열기",
"Repair Part":"부품 복구",
"Replace existing library file":"기존 라이브러리 파일 바꾸기",
"Report a bug — review a screenshot and open a GitHub draft":"버그 신고 — 스크린샷을 검토하고 GitHub 초안 열기",
"Report text copied. Paste it into GitHub and submit your report there.":"보고서 텍스트를 복사했습니다. GitHub에 붙여넣고 그곳에서 보고서를 제출하세요.",
@@ -476,6 +479,7 @@
"Second point":"두 번째 점",
"Section":"단면",
"Section position":"단면 위치",
"Sections":"단면",
"Sections (one sketch each)":"단면 (각각 스케치 하나)",
"Select Other":"다른 항목 선택",
"Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).":"다른 항목 선택: 모델 위에서 왼쪽 버튼을 가만히 누르고 있거나(또는 오른쪽 클릭 › 다른 항목 선택…) 커서 아래의 모든 항목을 나열합니다. 같은 위치를 다시 클릭하면 다음 항목이 선택됩니다. 가운데 버튼을 더블 클릭하면 홈으로 이동합니다(환경설정 › 탐색).",
"help.component.finish_edit":"제자리에서 편집 중인 부품을 저장하고 어셈블리로 돌아가 그 부품으로 어셈블리를 업데이트합니다. 연결된 부품의 변경을 마쳤을 때 사용하세요.",
"help.construct.plane.axis_point":"축과 축 위에 있지 않은 점을 포함하는 구성 평면을 만듭니다. 원점 축, 구성 축, 직선 모서리 또는 스케치 직선을 선택한 다음 꼭짓점, 스케치 점 또는 구성점을 선택합니다. 축 위의 점으로는 평면을 하나로 결정할 수 없습니다.",
"help.font_details":"인터페이스는 egui의 내장 글꼴을 사용합니다(Ubuntu Font Licence 및 MIT/Bitstream Vera 라이선스의 Ubuntu Light와 Hack, OFL 및 MIT의 Noto Emoji와 이모지 아이콘 글꼴). 스케치 텍스트는 Liberation Sans(SIL OFL 1.1)를 사용합니다. The Crafting Apps의 선택적 글꼴 팩 craft-fonts(BIZ UDPGothic, Shippori Mincho, BIZ UDMincho, Noto Sans CJK SC, Noto Sans Arabic; SIL OFL 1.1)는 SolidCraft 빌드에 포함되지 않습니다.",
"help.fonts":"글꼴",
"help.licences":"라이선스",
@@ -1282,6 +1315,27 @@
"home.start_hint":"설계를 만들거나, 최근 파일을 열거나, 예제를 살펴보세요.",
"home.whats_new":"새로운 기능",
"home.yesterday":"어제",
"import_report.details":"세부 정보:",
"import_report.file_one":"파일에 다른 문제가 1개 있었습니다.",
"import_report.file_other":"파일에 다른 문제가 {count}개 있었습니다.",
"import_report.hint":"이 부품을 만든 프로그램에서 다시 내보내면 해결될 수 있습니다. 세부 정보는 경고 메시지 복사에 있습니다.",
"import_report.left_out_one":"면 1개를 복구하지 못해 빠져 있습니다.",
"import_report.left_out_other":"면 {count}개를 복구하지 못해 빠져 있습니다.",
"import_report.needs_repair_one":"부품 1개는 모델링하기 전에 복구해야 합니다.",
"import_report.needs_repair_other":"부품 {count}개는 모델링하기 전에 복구해야 합니다.",
"prefs.browser_components_open":"구성요소를 펼친 상태로 시작",
"prefs.browser_components_open_note":"브라우저의 모든 구성요소가 이전처럼 펼쳐진 상태로 시작합니다. 끄면 직접 펼칠 때까지 접혀 있습니다.",
"prefs.browser_eye_left":"표시 아이콘을 접기 화살표 옆에 표시",
"prefs.browser_eye_left_note":"브라우저 행의 표시 아이콘을 행 오른쪽 끝의 열이 아니라 이전처럼 접기 화살표 옆에 표시합니다.",
"prefs.built_in":"기본 제공",
"prefs.button_left":"왼쪽 드래그",
"prefs.button_middle":"가운데 드래그",
"prefs.button_right":"오른쪽 드래그",
"prefs.carousel_next":"다음",
"prefs.carousel_previous":"이전",
"prefs.choose_font":"글꼴 파일 선택…",
"prefs.click":"클릭",
"prefs.contact_shading":"부드러운 접촉 음영",
@@ -1544,6 +1618,10 @@
"prefs.ctrl_cmd":"Ctrl / Cmd",
"prefs.curved_surfaces":"곡면",
"prefs.curves":"곡면",
"prefs.cut_preview_tint":"제거되는 재료를 빨간색으로 표시",
"prefs.cut_preview_tint_help":"미리 보기는 피처가 제거하는 재료와 대체되는 형상을 빨간색 반투명 고스트로 채웁니다. 끄면 이 채움이 완전히 투명해지고 윤곽선만 그려집니다.",
"prefs.dark_parts_shading":"어두운 부품의 형태 유지",
"prefs.dark_parts_shading_help":"선형 조명과 부드러운 하늘광으로 뷰를 음영 처리하여 어두운 면이 검게 뭉개지지 않고 그라데이션을 유지합니다",
"prefs.dead_zone_note":"빗금 친 영역이 데드존입니다. 그 안의 움직임은 무시됩니다.",
"prefs.default":"기본값",
"prefs.design":"설계 기본값",
@@ -1564,7 +1642,19 @@
"prefs.font_sample":"The quick brown fox · Ø12.50 mm · 45.0° · 0123456789",
"prefs.font_unreadable":"선택한 글꼴을 읽을 수 없습니다.",
"prefs.general":"일반",
"prefs.general_note":"언어, 저장 및 업데이트.",
"prefs.general.active":"사용 중",
"prefs.general.crash_reports":"충돌 보고서",
"prefs.general.edited":"수정됨",
"prefs.general.held":"포함 항목",
"prefs.general.import":"가져오기...",
"prefs.general.last_check":"마지막 확인: {time}",
"prefs.general.minutes":"분",
"prefs.general.name_setup":"이 설정의 이름",
"prefs.general.profile_name":"프로필 이름",
"prefs.general.save_new":"새로 저장",
"prefs.general.step_import":"STEP 및 가져오기",
"prefs.general.this_computer":"이 컴퓨터",
"prefs.general_note":"프로필, 언어, 파일 및 업데이트.",
"prefs.gesture_orbit":"회전",
"prefs.gesture_pan":"이동",
"prefs.gesture_zoom":"확대/축소",
@@ -1579,6 +1669,8 @@
"prefs.history_play_button":"기록 컨트롤에 기록 재생 버튼 표시",
"prefs.history_play_button_note":"기록 컨트롤의 한 단계 뒤로와 한 단계 앞으로 사이에 기록 재생을 추가합니다. 컨트롤을 마우스 오른쪽 버튼으로 클릭해 표시하거나 숨길 수도 있습니다.",
"prefs.hold_stop_snapping":"누르고 있으면 스냅 중지",
"prefs.home_fit_size":"홈·맞춤 크기",
"prefs.home_fit_size_note":"홈, 맞춤, 연 디자인 또는 뷰 탐색기의 뷰 변경으로 모델을 화면에 맞출 때 모델이 뷰에서 차지하는 비율. 아래 설정과 관계없이 적용됩니다. 100 %: 패널, 나침반, 내비게이션 바 사이의 뷰를 가득 채웁니다.",
"prefs.icons_only":"아이콘만",
"prefs.imported_file":"가져온 파일",
"prefs.input":"입력",
@@ -1587,19 +1679,22 @@
"prefs.interface_note":"SolidCraft의 모양과 각 부분의 위치입니다.",
"prefs.interval_minutes":"{n}분",
"prefs.labels":"레이블",
"prefs.language_system":"시스템",
"prefs.layout":"레이아웃",
"prefs.layout_note":"컴팩트는 패널을 창 가장자리에 고정합니다. 브라우저 반투명은 플로팅에서 사용할 수 있습니다. 어시스턴트 위치는 어시스턴트 페이지에서 바꿀 수 있습니다.",
"prefs.left":"왼쪽",
"prefs.left_click":"왼쪽 클릭",
"prefs.line_drag_draws_one":"누른 채 드래그하면 선 하나 그리기",
"prefs.line_drag_draws_one_note":"선 도구에서 누르고 드래그한 뒤 놓으면 누른 곳에서 놓은 곳까지 선 하나를 그리고 거기서 끝납니다. 클릭하면 이전처럼 이어지는 선을 그립니다. 끄면: 드래그는 클릭처럼 놓은 곳에 점을 둡니다.",
"prefs.line_hover_tangent_arc":"선의 마지막 점에 머무르면 접선 호로 전환",
"prefs.line_hover_tangent_arc_note":"선 도구에서 선분을 그린 뒤 체인의 마지막 점에서 벗어났다가 돌아와 포인터를 그 위에 멈추면, 다음 클릭으로 접선 호의 끝점을 지정합니다. 같은 동작으로 선으로 돌아갑니다. 끔: 머물러도 아무 일도 일어나지 않습니다.",
"prefs.live_input":"실시간 입력",
"prefs.live_preview":"실시간 미리보기",
"prefs.max_file_size":"열 수 있는 최대 파일 크기",
"prefs.max_file_size_design":"디자인 파일",
"prefs.max_file_size_design":"열 파일의 최대 크기: 디자인",
"prefs.max_file_size_flag":"이번 실행은 --max-file-size {size}로 시작했으며 SolidCraft를 닫을 때까지 적용됩니다. 이 설정은 해당 옵션 없이 시작할 때 적용됩니다.",
"prefs.max_file_size_note":"기본값: 512 MB 및 256 MB, 최대 16 GB. 파일을 열려면 파일 크기의 몇 배에 달하는 메모리가 필요합니다. 큰 가져오기 데이터를 보관하는 디자인은 저장하고 다시 열기 위해 디자인 파일 한도를 높여야 할 수 있습니다.",
"prefs.max_file_size_step":"STEP 및 가져오기 파일",
"prefs.max_file_size_step":"열 파일의 최대 크기: STEP 및 가져오기",
"prefs.max_file_size_web":"웹 앱은 STEP 및 가져오기 파일을 512 MB까지, 디자인을 256 MB까지 엽니다. 브라우저 탭은 더 큰 파일을 담을 수 없습니다. 데스크톱 앱에서는 이 한도를 높일 수 있습니다.",
"prefs.megabytes":"MB",
"prefs.minutes":"분",
@@ -1609,6 +1704,9 @@
"prefs.mouse_mapping":"마우스 매핑",
"prefs.navigation":"탐색",
"prefs.navigation_note":"마우스, 트랙패드, 3D 마우스로 뷰를 움직이는 방식입니다.",
"prefs.navigator_fit":"뷰 탐색기로 뷰를 바꾼 뒤 모델 맞춤",
"prefs.navigator_fit_note":"큐브의 면, 모서리, 화살표나 기즈모의 축을 클릭하면 어느 방향에서든 전체가 들어가는 한 거리(경계 구)에서 모델의 중심을 바라봅니다. 켜져 있는 동안 홈 뷰도 같은 확대/축소와 중심을 쓰므로 그 뒤에 고른 뷰는 방향만 바뀝니다. 끄면 뷰가 제자리에서 회전하며 대상과 확대/축소를 유지합니다.",
"prefs.network_locations_note":"파일 서버에 디자인을 보관하는 조직용입니다. 끄면 허용한 서버만 사용합니다.",
"prefs.not_on_gpu":"이 GPU에서는 사용할 수 없음",
"prefs.on":"켜짐",
"prefs.opaque":"불투명",
@@ -1621,8 +1719,14 @@
"prefs.persistent_ribbon_pressed_help":"효과가 켜져 있는 동안 리본 명령을 강조 표시합니다. 끄면 이전의 중립적인 모양과 명령 도움말을 유지합니다.",
"prefs.perspective_fov":"시야각",
"prefs.preview_choices":"선택 항목 미리보기",
"prefs.preview_tint_new_faces":"미리 보기에서 새 면에 색 입히기",
"prefs.preview_tint_new_faces_help":"바디를 변경하는 피처의 미리 보기에서 추가되는 면을 미리 보기 색으로 그릴 수 있습니다. 끄면 바디가 원래 색으로 그려집니다.",
"prefs.print_face_highlight":"출력 바닥면 강조",
"prefs.print_face_highlight_tip":"뷰에서 바디의 출력 바닥면을 색칠하고 윤곽을 그리는 강도입니다. 0 %이면 강조하지 않습니다.",
"prefs.profile_export":"내보내기",
"prefs.profile_imported":"프로필을 가져왔습니다.",
"prefs.profile_operations":"작업 프로파일링",
"prefs.profile_operations_note":"SMLib 호출, 커널 작업, 피처, 명령, 가져오기에 걸리는 시간을 기록합니다. 에이전트는 diagnostics.profile로 읽습니다.",
"prefs.project_options_dialog":"Project 옵션 대화상자",
"prefs.project_options_dialog_note":"켜기: 투영 전에 지오메트리 또는 바디와 투영 링크를 선택합니다. 끄기: 기존 직접 선택 작업 흐름을 유지합니다.",
"prefs.quality_default":"기본값",
@@ -1630,8 +1734,11 @@
"prefs.quality_slowest":"가장 느림",
"prefs.quality_smoother":"더 부드럽게",
"prefs.reports_saved":"{n}개 저장됨",
"prefs.restore_page_defaults":"페이지 기본값 복원",
"prefs.ribbon_click_ends_tool":"실행 중인 도구의 버튼을 클릭하면 도구 종료",
"prefs.ribbon_click_ends_tool_note":"사용 중인 스케치 도구의 강조된 리본 버튼을 클릭하면 도구가 종료되어 뷰에서 클릭하면 다시 선택됩니다. 끄기: 클릭하면 도구가 다시 시작됩니다.",
"prefs.sketch_tab_always_note":"스케치가 열려 있지 않을 때도 스케치 탭이 리본에서 모델 바로 다음에 남아 있습니다. 그 그리기 도구는 선택한 평면이나 면, 또는 다음에 고르는 평면에서 스케치를 시작하고 그 안에서 도구를 바로 쓸 수 있게 합니다.",
"prefs.sketch_tracking_guides":"중심 및 중점 정렬 안내선",
"prefs.sketch_tracking_guides_note":"원 중심이나 직선 모서리의 중점에 마우스를 올린 다음 수평 또는 수직으로 이동하면 임시 점선 안내선이 표시됩니다.",
"prefs.sketch_tracking_points":"그리는 동안 끝점과 모서리에서도 정렬 안내선",
"prefs.sketch_tracking_points_note":"그리기 도구가 점을 기다리는 동안 선이나 호의 끝점, 직사각형 모서리, 자유 점에 마우스를 올리면 중심이나 중점과 같은 임시 점선 안내선이 표시됩니다. 끄면: 중심과 중점만.",
"prefs.sketching":"스케치",
"prefs.snap_drawing_note":"스케치 점을 그리거나 드래그하는 동안.",
"prefs.source":"소스",
@@ -1676,6 +1785,24 @@
"prefs.status_error":"오류",
"prefs.status_selected":"선택됨",
"prefs.status_warning":"경고",
"prefs.structure.appearance":"모양",
"prefs.structure.appearance_note":"색상, 텍스트 및 접근성.",
"prefs.structure.in_profile":"프로필에 포함",
"prefs.structure.layout":"레이아웃",
"prefs.structure.layout_note":"창 구성 요소의 위치.",
"prefs.structure.look":"보기",
"prefs.structure.measure_pointer":"측정 및 포인터",
"prefs.structure.mouse3d":"3D 마우스",
"prefs.structure.mouse3d_note":"SpaceMouse 및 SpaceNavigator.",
"prefs.structure.navigation_note":"마우스와 트랙패드. 3D 마우스는 별도 페이지에 있습니다.",
"prefs.structure.profile":"프로필",
"prefs.structure.profile_edited":"저장 후 변경됨",
"prefs.structure.profile_hover":"설정 프로필에 저장됨",
"prefs.structure.scale_percent":"{percent}%",
"prefs.structure.sketch":"스케치",
"prefs.structure.tools":"도구",
"prefs.structure.tools_note":"모델링 도구의 동작.",
"prefs.structure.work":"작업",
"prefs.supersampling_brief":"뷰를 더 크게 그린 뒤 줄여서 필터링합니다. 매우 선명하지만 더 무겁습니다.",
"prefs.tab_accent_note":"강조 색상이 활성 탭을 따라갑니다",
"prefs.theme_file":"테마 파일",
@@ -1685,6 +1812,16 @@
"prefs.theme_follow_note":"다른 도구가 파일을 다시 쓸 때마다 다시 불러옵니다. 테마를 선택하면 따르기를 중지합니다.",
"prefs.theme_follow_off":"끄기",
"prefs.theme_follow_stop":"따르기 중지",
"prefs.theme_option_opacity":"불투명도",
"prefs.theme_option_opacity_help":"플로팅 패널의 불투명도를 조정합니다. 뷰포트 색상 위에서도 텍스트를 읽을 수 있도록 최솟값이 적용됩니다.",
"prefs.theme_option_tab_colours":"탭 색상",
"prefs.theme_option_tab_colours_help":"각 리본 탭에 이 테마의 패널 및 뷰포트 색상을 사용합니다.",
"prefs.theme_option_tab_fade_ms":"탭 전환",
"prefs.theme_option_tab_fade_ms_help":"탭을 전환할 때 패널 및 뷰포트 색상을 서서히 변경합니다. 0이면 즉시 전환합니다.",
"prefs.theme_options_badge":"옵션",
"prefs.theme_options_more":"더 보기 · {count}",
"prefs.theme_options_reset":"초기화",
"prefs.theme_options_unavailable":"이 기기에서는 사용할 수 없음",
"prefs.timeline_half_hour":"−30분",
"prefs.timeline_now":"지금",
"prefs.timeline_quarter_hour":"−15",
@@ -1704,6 +1841,12 @@
"prefs.under_cursor":"커서 아래",
"prefs.units_precision":"단위 및 정밀도",
"prefs.updates":"업데이트",
"prefs.validation":"바디 검사",
"prefs.validation.each_feature":"피처마다 한 번",
"prefs.validation.each_step":"모든 단계 후",
"prefs.validation.label":"커널 전체 검사",
"prefs.validation.off":"끄기 (실험적)",
"prefs.validation_note":"모든 단계 후: 스윕, 불리언, 블렌드마다 검사합니다.\n피처마다 한 번: 각 피처의 결과를 한 번 검사합니다.\n끄기 (실험적): 검사하지 않습니다.",
"prefs.value_boxes_in_view":"뷰에서 핸들 옆에 값 표시",
"prefs.value_boxes_in_view_tip":"명령의 값(거리, 반경 등)을 모델 위 핸들 옆 상자에 표시합니다. 끄면 값은 명령 창에 입력하며, 선택 후 키보드 입력이 그 창으로 가고 모델을 가리는 것이 없습니다.",
"prefs.view":"뷰 동작",
@@ -1714,6 +1857,8 @@
"prefs.viewport_analysis_status_help":"활성 해석을 뷰포트 위에 표시하고 각 항목에서 범례를 엽니다. Esc로 최신 해석을 끕니다. 끄면 모서리 범례와 이전 Esc 동작으로 돌아갑니다.",
"prefs.viewport_section_status":"뷰포트 단면 상태 표시",
"prefs.viewport_section_status_help":"뷰포트에 단면 설정을 표시합니다. Escape 키와 활성 리본 버튼으로 단면을 끕니다. 비활성화하면 이전 단면 조작을 유지합니다.",
"prefs.viewport_status_details":"뷰포트 실시간 상세 정보",
"prefs.viewport_status_details_help":"표준 상세 카드에서 활성 분석 및 단면 설정을 편집합니다. 끄면 읽기 전용 분석 범례와 단면 대화상자로 돌아갑니다.",
"prefs.viewport_status_summary":"뷰포트 상태 항목 요약",
"prefs.viewport_status_summary_help":"상태 항목이 3개 이상이면 하나의 요약 배지로 표시합니다. 비활성화하면 모든 항목을 기존 행에 표시합니다.",
"prefs.wheel":"휠",
@@ -1733,6 +1878,17 @@
"recovery.just_now":"방금",
"recovery.min_ago":"{count}분 전",
"recovery.never_saved":"저장된 적 없음",
"refused.change":"{body}을(를) 변경하지 못했습니다.",
"refused.cut":"{body}을(를) 자르지 못했습니다.",
"refused.face_curved":"곡면 중 하나를 모델링에 사용할 수 없습니다.",
"refused.face_flat":"평면 중 하나를 모델링에 사용할 수 없습니다.",
"refused.face_freeform":"자유 곡면 중 하나를 모델링에 사용할 수 없습니다.",
"refused.face_rounded":"둥근 면 중 하나를 모델링에 사용할 수 없습니다.",
"refused.faces_apart":"면들이 충분히 맞물리지 않아 모델링에 사용할 수 없습니다.",
"refused.intersect":"{body}과(와) 교차하지 못했습니다.",
"refused.join":"{body}에 결합하지 못했습니다.",
"refused.repair":"부품 복구",
"refused.show_face":"면 보기",
"render.add_ground":"Add fitted ground to setup",
"render.all_shots_label":"모든 샷",
"render.appearance_editor.absorption":"흡수",
@@ -1777,6 +1933,10 @@
"render.appearances":"외관",
"render.assign_help":"클릭하여 선택 항목에 적용하거나 드래그하여 미리 보고 놓으세요. 선택이 없으면 칠하기를 시작합니다.",
"render.background":"장면 배경",
"render.batch_all_shots":"모든 샷 ({count})",
"render.batch_empty":"모든 샷을 렌더링하기 전에 샷을 저장하세요.",
"render.batch_limit":"한 번에 최대 32개의 샷을 렌더링할 수 있습니다.",
"render.batch_status":"{running}개 실행 중 · {waiting}개 대기 중",
"render.bloom_enable":"표시 블룸",
"render.bloom_help":"양의 선형 하이라이트를 세 번의 정규화 필터로 확산하는 출력 전용 효과입니다. 반경은 출력 픽셀 단위이며 sRGB 전에 더합니다. 렌즈·볼륨·수렴 개선이 아니며 원본 EXR은 변하지 않습니다.",
"render.bloom_opaque":"블룸에는 불투명 출력이 필요합니다. 투명 PNG를 몰래 합성하지 않고 거부합니다.",
"ui.agent_chat_reinstall":"{agent}이(가) 설치되어 있지만({program}) SolidCraft가 확인할 때 시작되지 않았습니다: {error}\n설치가 완료되지 않았거나 다른 종류의 컴퓨터용일 수 있습니다. `{install}`(으)로 다시 설치하고, 터미널에서 버전이 출력되는지 확인한 뒤 새로 고침을 누르세요.",
"ui.continuity_smooth_curvature_change_tip":"부드러운 곡률 변화(G4): 이음매에서 곡률이 변하는 방식까지 부드럽게 이어집니다.",
"ui.continuity_tangent":"접선",
"ui.continuity_tangent_tip":"접선(G1): 꺾임은 없지만, 이음매에서 곡률이 급변합니다.",
"ui.copy":"복사",
"ui.copy_details":"세부 정보 복사",
"ui.copy_details_tip":"찾아보거나 보고할 수 있도록 전체 메시지를 복사합니다.",
"ui.corner":"코너",
"ui.corners":"코너",
"ui.counterbore":"카운터보어",
@@ -3174,6 +3396,7 @@
"ui.dark":"어둡게",
"ui.default_modelling_orientation":"기본 모델링 방향",
"ui.delete":"삭제",
"ui.delete_select_first":"먼저 삭제할 항목을 선택하세요: 피처, 바디, 컴포넌트 또는 스케치 형상",
"ui.depth":"깊이",
"ui.design":"디자인",
"ui.design_properties.author":"작성자",
@@ -3187,6 +3410,40 @@
"ui.design_properties.part_number":"부품 번호",
"ui.design_properties.project":"프로젝트",
"ui.design_properties.revision":"리비전",
"ui.details_access_caption":"선택한 방향에서 공구가 각 면에 도달할 수 있는지 표시합니다.",
"ui.details_angle":"각도",
"ui.details_continuity_caption":"선택한 이음부를 편집합니다. 다른 이음부는 각자의 설정을 유지합니다.",
"ui.details_continuity_stale":"이전 형상입니다. 이 이음부를 편집하거나 화면에 맞추려면 분석을 다시 실행하세요.",
"ui.details_copy_list":"목록 복사",
"ui.details_curvature":"곡률 공차",
"ui.details_curvature_caption":"각 면의 국소 곡률 반지름에 따라 색상이 표시됩니다.",
"ui.details_direction":"공구 방향",
"ui.details_draft_caption":"금형 분리 방향에 대한 각 면의 각도에 따라 색상이 표시됩니다.",
"ui.details_edit_seam":"이음부 편집",
"ui.details_fixture":"UI 구성 요소 예시 — 샘플 데이터만 표시",
"ui.details_fixture_caption":"설명용 값을 사용하는 UI 구성 요소 예시입니다. 모델의 분석 결과가 아닙니다.",
"ui.details_fixture_problem":"문제가 있는 결과 예시",
"ui.details_fixture_readout":"측정값 예시",
"ui.details_flip":"뒤집기",
"ui.details_gap":"간격",
"ui.details_hatch":"절단면 해칭",
"ui.details_jump":"곡률 불연속",
"ui.details_key":"범례",
"ui.details_offset":"오프셋",
"ui.details_plane":"평면",
"ui.details_pull":"금형 분리 방향",
"ui.details_radius":"반지름",
"ui.details_readout":"측정값",
"ui.details_samples":"샘플 수",
"ui.details_seam":"{body} · 모서리 {edge}",
"ui.details_settings":"설정",
"ui.details_sharp_gap":"날카로운 이음 또는 간격",
"ui.details_show_all":"전체 {count}개 표시",
"ui.details_smooth":"매끄러움",
"ui.details_stripes":"줄무늬",
"ui.details_target":"형상에 맞게 보기 조정",
"ui.details_worst_seams":"연속성이 가장 나쁜 이음부",
"ui.details_zebra_caption":"반사된 줄무늬는 면이 얼마나 매끄럽게 이어지는지 보여 줍니다.",
"ui.diameter":"지름",
"ui.dimension":"치수",
"ui.direct_interaction":"직접 조작",
@@ -3231,8 +3488,10 @@
"ui.edit_in_place_saved_elsewhere":"부품이 다른 파일에 저장되었습니다. 어셈블리는 여전히 {name}에 연결되어 있습니다",
"ui.edit_in_place_wait":"디자인에서 실행 중인 작업이 끝날 때까지 기다리세요",
"ui.edit_section_analysis":"단면 분석 편집",
"ui.edit_sketch_empty":"편집할 스케치가 없습니다",
"ui.ellipse":"타원",
"ui.emboss_wrap_note":"지원되는 원통에 접하는 직교 선 프로파일은 자동으로 감깁니다. 대상을 고르려면 벽을 선택하세요.",
"ui.end":"끝",
"ui.end_radius":"끝 반지름",
"ui.end_scale":"끝 배율",
"ui.entities":"요소",
@@ -3241,12 +3500,15 @@
"ui.equation_explicit":"명시적",
"ui.equation_form":"형식",
"ui.equation_note":"변수는 단위가 없는 수입니다. sin(t)는 라디안으로 읽습니다. 단위가 없는 결과는 디자인 단위입니다.",
"ui.equation_note_range":"변수는 범위와 같이 길이입니다. 길이 매개변수와 함께 쓸 수 있으며, sin()에는 길이로 나누어 넣습니다. 단위가 없는 결과는 디자인 단위로 읽습니다.",
"ui.equation_parametric":"매개변수식",
"ui.equation_variable_unit":"변수에 범위의 단위 사용",
"ui.equation_x_of_t":"x(t)",
"ui.equation_y_of_t":"y(t)",
"ui.equation_y_of_x":"y(x)",
"ui.equivalent_radius":"등가 반지름",
"ui.expand":"펼치기",
"ui.explode_needs_two_components":"분해 보기는 구성 요소를 서로 떼어 놓으므로 설계에 구성 요소가 두 개 이상 있어야 합니다(새 구성 요소, 설계 삽입 또는 바디로 구성 요소 만들기)",
"ui.exportDxf":"DXF 내보내기…",
"ui.export_ellipsis_keymap":"내보내기…",
"ui.export_keymap_tip":"키, S 상자 즐겨찾기, 도구 모음을 파일로 내보내기",
@@ -3254,11 +3516,39 @@
"ui.extent_type":"범위 유형",
"ui.extrude":"돌출",
"ui.factor":"배율",
"ui.fade":"페이드",
"ui.fade_length":"페이드 길이",
"ui.feature_history":"피처 기록",
"ui.feature_options":"피처 옵션",
"ui.features":"피처",
"ui.file":"파일",
"ui.fillet":"필렛",
"ui.fillet_corner_ball":"볼",
"ui.fillet_corner_ball_tip":"굴러가는 볼의 구면 일부로, 각 라운드에 접합니다(G1).",
"ui.fillet_corner_curvature_tip":"곡률(G2): 부드러운 패치. 코너를 각 모서리를 따라 셋백만큼(입력하지 않으면 반지름의 {factor}배) 물려 패치로 채우므로, 반사가 꺾임 없이 지나갑니다.",
"ui.fillet_corner_needs_constant":"부드러운 패치 코너(G2)에는 일정한 반지름과 정확한 반지름 맞춤이 필요합니다.",
"ui.fillet_corner_patch":"부드러운 패치",
"ui.fillet_corner_patch_tip":"곡률 연속(G2): 코너를 각 모서리를 따라 물려 패치로 채우므로, 반사가 꺾임 없이 지나갑니다.",
"ui.fillet_corner_tangent_tip":"접선(G1): 굴러가는 볼 코너. 굴러가는 볼의 구면 일부로, 각 라운드에 접합니다.",
"ui.fillet_error_corner":"여기에서는 부드러운 코너를 만들 수 없었습니다. 다른 셋백이나 접선 코너를 시도해 보세요.",
"ui.fillet_error_failed":"이 모서리들에 이 필렛을 만들 수 없었습니다. 다른 반지름을 시도하거나 한 번에 둥글게 하는 모서리 수를 줄여 보세요.",
"ui.fillet_error_setback_short":"이 코너의 패치에 비해 셋백이 너무 짧습니다. {least}부터 만들 수 있습니다. 더 긴 셋백을 시도해 보세요.",
"ui.fillet_error_too_large":"이 모서리 옆의 면에 비해 반지름이 너무 큽니다. 더 작은 반지름을 시도하거나 '면 경계'를 '최대 반지름'으로 설정하세요.",
"ui.fillet_fit":"면 경계",
"ui.fillet_fit_exact":"정확한 반지름",
"ui.fillet_fit_needs_constant":"반지름 맞춤에는 일정한 반지름이 필요합니다.",
"ui.fillet_fit_reduce":"최대 반지름",
"ui.fillet_fit_taper":"좁힌 반지름",
"ui.fillet_fit_tip":"반지름이 모서리 옆 면이 허용하는 것보다 클 때.\n정확한 반지름: 지정한 반지름 그대로, 또는 둥글게 하지 않고 이유를 알리는 메시지.\n최대 반지름: 모든 모서리를 들어가는 가장 큰 반지름으로 둥글게 합니다.\n좁힌 반지름: 반지름을 유지하고 면이 모자란 곳에서만 라운드를 좁힙니다.",
"ui.fillet_options_tip":"접선 체인: 선택한 모서리에서 부드럽게 이어지는 모서리도 둥글게 합니다.\n미리 보기: 편집하는 동안 결과를 뷰에 표시합니다.",
"ui.fillet_setback":"셋백",
"ui.fillet_setback_hint":"{factor} × 반지름",
"ui.fillet_setback_least":"{least}보다 크게",
"ui.fillet_setback_tip":"부드러운 코너 패치가 시작되는 위치: 코너에서 각 모서리를 따른 거리. 기본값은 반지름의 {factor}배. 최소 셋백(셋백 없이 라운드가 만나는 곳, 면이 서로 직각이면 반지름)보다 커야 합니다.",
"ui.fillet_smooth_radius":"반지름 부드럽게 변화",
"ui.fillet_type_choices_tip":"일정한 반지름: 모서리 전체에 하나의 반지름.\n현 길이: 면이 어떤 각도로 만나든 라운드의 폭이 같습니다.\n가변 반지름: 양 끝의 반지름과, 추가하면 모서리를 따라 더.\n곡률 연속: 평면과 만나는 곳에서 반사가 꺾이지 않는 단면(G2).\n스플라인: 모서리를 따라 반지름이 설정한 제어 반지름을 따릅니다.",
"ui.fillet_type_curvature":"곡률 연속",
"ui.fillet_type_tip":"모서리를 가로지르는 단면. 곡률 연속: 평면 사이의 곡률 연속(G2) 단면으로, 반사가 면에서 라운드로 꺾임 없이 이어집니다.",
"ui.filter_commands_or_keys":"명령 또는 키 필터",
"ui.findInTimeline":"타임라인에서 찾기",
"ui.findInWindow":"창에서 찾기",
@@ -3396,6 +3686,7 @@
"ui.insert_design.saved_file":"{name}에 저장되지 않은 변경 사항이 있어 저장된 파일을 삽입했습니다. 저장한 다음 링크 업데이트로 변경 사항을 가져오세요.",
"ui.insert_design.unsaved":"저장되지 않은 변경 사항",
"ui.inspect":"검사",
"ui.instances":"인스턴스",
"ui.intersect":"교차",
"ui.isolate":"분리 표시",
"ui.join":"접합",
@@ -3404,12 +3695,14 @@
"ui.joints":"조인트",
"ui.keyboard_shortcuts":"키보드 단축키",
"ui.language":"언어",
"ui.lasso_select":"올가미(자유롭게 둘러 그리기: 완전히 안쪽에 있는 것을 선택)",
"ui.layout_compact":"컴팩트",
"ui.layout_floating":"플로팅",
"ui.length":"길이",
"ui.length_decimals":"길이 소수점 자릿수",
"ui.light":"밝게",
"ui.line":"선",
"ui.line_arc_hint":"접선 호: 호의 끝점을 클릭합니다. 선으로 돌아가려면 마지막 점에 다시 머무르고, 끝내려면 오른쪽 클릭 또는 Esc를 누릅니다",
"ui.lock":"잠금",
"ui.loft":"로프트",
"ui.look_at":"바라보기",
@@ -3488,7 +3781,9 @@
"ui.part_size_needs_a_part":"크기를 바꿀 삽입된 표준 부품(나사, 너트, 와셔 또는 핀)을 선택하십시오. 바디를 키우거나 줄이려면 축척을 사용하십시오.",
"ui.part_size_shared":"부품을 다시 빌드하며 추가된 피처는 모두 대체됩니다. 이 구성요소의 모든 인스턴스가 업데이트됩니다.",
"ui.paste":"붙여넣기",
"ui.patch_continuity_corner_tip":"패치는 각 변을 따라 주변 면과 선택한 연속성으로 이어집니다. 주변 면끼리 서로 다른 곡률로 만나는 모서리에서는 그곳에서 접선(G1)으로 유지됩니다.",
"ui.path":"경로",
"ui.pattern_object_type_tip":"바디: 뷰나 브라우저에서 선택하는 솔리드 형상이며, 각각 통째로 복사됩니다.\n피처: 돌출이나 구멍 같은 기록의 단계이며, 기록에서 또는 그 단계가 만든 면에서 선택합니다. 그 단계가 반복됩니다.\n스케치는 둘 다 아닙니다. 곡선은 스케치 안의 패턴이나 대칭 복사로 반복하거나, 먼저 돌출하세요.",
"ui.pattern_on_path":"경로 패턴",
"ui.perpendicular":"수직",
"ui.perspective_view":"원근 투영 뷰",
@@ -3520,9 +3815,9 @@
"ui.polygon":"다각형",
"ui.preferences":"환경 설정",
"ui.press_a_key":"키를 누르세요…",
"ui.print_face_body_not_sent":"이 면의 바디는 보내지지 않습니다. 먼저 바디에 추가하십시오",
"ui.print_face_cleared":"{body}: 출력 바닥면을 해제했습니다",
"ui.print_face_input":"출력 바닥면",
"ui.print_face_one_body":"출력 바닥면은 바디마다 하나입니다. 변경하려면 그 바디만 보내십시오",
"ui.print_face_pick":"솔리드 바디의 평면 하나를 선택하면 출력 바닥면이 됩니다",
"ui.print_face_set":"{body}: 출력 바닥면을 설정했습니다. 슬라이서로 보내면 이 면이 아래로 놓입니다",
"ui.profile":"프로파일",
@@ -3540,6 +3835,7 @@
"ui.properties.inertia_y":"Iyx, Iyy, Iyz",
"ui.properties.inertia_z":"Izx, Izy, Izz",
"ui.properties.measuring":"측정 중…",
"ui.properties.measuring_bodies":"측정 중… 바디 {total}개 중 {done}개",
"ui.properties.measuring_failed":"측정이 끝나기 전에 중단되었습니다.",
"ui.insert_design.saved_file":"{name} ma niezapisane zmiany, więc wstawiono jego zapisany plik. Zapisz go, a potem użyj Aktualizuj łącza, aby wprowadzić zmiany.",
"ui.insert_design.unsaved":"Niezapisane zmiany",
"ui.inspect":"Sprawdź",
"ui.instances":"Wystąpienia",
"ui.intersect":"Przytnij",
"ui.isolate":"Izoluj",
"ui.join":"Połącz",
@@ -3139,9 +3144,9 @@
"ui.polygon":"Wielokąt",
"ui.preferences":"Preferencje",
"ui.press_a_key":"naciśnij klawisz…",
"ui.print_face_body_not_sent":"Bryła tej powierzchni nie jest wysyłana: najpierw dodaj ją do Bryły",
"ui.print_face_cleared":"{body}: usunięto powierzchnię druku",
"ui.print_face_input":"Powierzchnia druku",
"ui.print_face_one_body":"Powierzchnia druku należy do jednej bryły: wyślij tę bryłę osobno, aby ją zmienić",
"ui.print_face_pick":"Wybierz płaską powierzchnię bryły, aby ustawić ją jako powierzchnię druku",
"ui.print_face_set":"{body}: ustawiono powierzchnię druku; Wyślij do slicera kładzie bryłę na niej",
"ui.profile":"Profil",
@@ -3415,7 +3420,7 @@
"update.check_unavailable":"Sprawdzanie aktualizacji nie jest dostępne dla tej instalacji.",
"update.checking":"Sprawdzanie…",
"update.copy":"Kopiuj",
"update.dmg_opened":"Obraz dysku jest otwarty i zweryfikowany: przeciągnij SolidCraft do folderu Aplikacje, zastępując starą kopię, a następnie uruchom SolidCraft ponownie.",
"update.dmg_opened":"Obraz dysku jest otwarty i zweryfikowany: zakończ SolidCraft, przeciągnij nowy SolidCraft do folderu Aplikacje, zastępując starą kopię, a następnie ponownie otwórz SolidCraft.",
"update.download":"Pobierz",
"update.download_open":"Pobierz i otwórz",
"update.downloading":"Pobieranie i weryfikacja… {done} z {total} MB",
"prefs.browser_components_open_note":"Cada componente no navegador começa aberto, como antes, em vez de fechado até que você o abra.",
"prefs.built_in":"Integrado",
"prefs.button_left":"Arrastar com o esquerdo",
"prefs.button_middle":"Arrastar com o meio",
@@ -1882,10 +1885,15 @@
"ui.construction":"Construção",
"ui.construction.ribbon_label":"Linhas aux.",
"ui.context_menu":"Menu de contexto",
"ui.continuity_crease":"Vinco",
"ui.continuity_curvature":"Curvatura",
"ui.continuity_curvature_change":"Variação de curvatura",
"ui.continuity_g0":"G0 vinco",
"ui.continuity_g1":"G1 tangente",
"ui.continuity_g2":"G2 curvatura",
"ui.continuity_gap":"Folga",
"ui.continuity_position":"Posição",
"ui.continuity_tangent":"Tangente",
"ui.copy":"Copiar",
"ui.corner":"Canto",
"ui.corners":"Cantos",
@@ -2091,6 +2099,7 @@
"ui.infinite":"Infinita",
"ui.insert":"Inserir",
"ui.inspect":"Inspecionar",
"ui.instances":"Instâncias",
"ui.intersect":"Interseção",
"ui.isolate":"Isolar",
"ui.join":"Unir",
@@ -2204,9 +2213,9 @@
"ui.polygon":"Polígono",
"ui.preferences":"Preferências",
"ui.press_a_key":"pressione uma tecla…",
"ui.print_face_body_not_sent":"O corpo dessa face não está sendo enviado: adicione-o primeiro a Corpos",
"ui.print_face_cleared":"{body}: face de impressão removida",
"ui.print_face_input":"Face de impressão",
"ui.print_face_one_body":"Uma face de impressão pertence a um único corpo: envie esse corpo sozinho para alterá-la",
"ui.print_face_pick":"Selecione uma face plana de um corpo sólido para torná-la a face de impressão",
"ui.print_face_set":"{body}: face de impressão definida; Enviar ao fatiador apoia o corpo sobre ela",
"ui.profile":"Perfil",
@@ -2404,7 +2413,7 @@
"update.check_unavailable":"A verificação de atualizações não está disponível para esta instalação.",
"update.checking":"Verificando…",
"update.copy":"Copiar",
"update.dmg_opened":"A imagem de disco está aberta e verificada: arraste o SolidCraft para Aplicativos, substituindo a cópia antiga, e reinicie o SolidCraft.",
"update.dmg_opened":"A imagem de disco está aberta e verificada: encerre o SolidCraft, arraste o novo SolidCraft para Aplicativos, substituindo a cópia antiga, e abra o SolidCraft novamente.",
"update.download":"Baixar",
"update.download_open":"Baixar e abrir",
"update.downloading":"Baixando e verificando… {done} de {total} MB",
"Back to the original order":"Повернути початковий порядок",
"Ball":"Кульове",
"Bar":"Смуга",
"Base Center":"Центр основи",
@@ -595,6 +596,8 @@
"Snap to face and edge centres":"Прив'язка до центрів граней і ребер",
"SolidCraft cannot submit reports directly. Submit on GitHub; no token is needed in the app.":"SolidCraft не може надсилати звіти напряму. Надішліть їх на GitHub; токен у застосунку не потрібен.",
"SolidCraft closed before these designs were saved. Their last autosave can be opened.":"SolidCraft закрився до того, як ці проєкти було збережено. Можна відкрити їхнє останнє автозбереження.",
"Sort A to Z":"Сортувати від А до Я",
"Sort Z to A":"Сортувати від Я до А",
"Spacing 2 must be a non-zero number":"Крок 2 має бути ненульовим числом",
"Spacing must be a non-zero number":"Крок має бути ненульовим числом",
"dialog.no_shown_body":"Немає видимих тіл для виконання операції",
"dialog.pattern_sketch_not_object":"Виберіть тіла або операції: ескіз не є ні тим, ні іншим. Повторіть його криві власним інструментом «Масив» чи «Дзеркало» в ескізі або спершу видавіть його.",
"dialog.select":"↖ Вибрати",
"dialog.selected_count":"↖ Вибрано: {count}",
"dialog.selection_guidance":"Виберіть вхідні дані, щоб змінити їх. Клацніть вибрані об'єкти, щоб прибрати їх; натискання з Ctrl/Cmd також перемикає їх. Перегляньте попередній перегляд, а потім натисніть OK.",
@@ -1387,21 +1408,168 @@
"from the rule":"з правила",
"help.apache":"Ліцензія Apache 2.0",
"help.appearance.assign":"Надає вибраним тілам, граням або компонентам колір чи вигляд матеріалу, не змінюючи їхньої ваги. Використовуйте, щоб розрізнити деталі або переглянути оздоблення.",
"help.assembly.bom":"Перелічує деталі проєкту або компонента з їхньою кількістю за номером деталі й може зберегти перелік як CSV або JSON. Використовуйте як список деталей для замовлення та складання.",
"help.attributions":"Відомості про авторство (ATTRIBUTION.md)",
"help.canvas.decal":"Розміщує зображення на плоскій грані моделі, наче наклейку. Використовуйте, щоб показати етикетку, логотип чи надрукований візерунок на деталі.",
"help.canvas.edit":"Змінює полотно: його положення, розмір, кут, непрозорість, віддзеркалення, видимість або назву. Використовуйте, щоб сумістити опорне зображення з ескізом, який ви обводите по ньому.",
"help.canvas.insert":"Розміщує зображення PNG або JPEG на площині чи грані як прозорий орієнтир. Використовуйте, щоб обвести фото чи креслення в ескізі, задавши зображенню відомий розмір.",
"help.component.break_link":"Відокремлює пов'язаний компонент від файлу його проєкту, залишаючи його тіла без змін. Використовуйте, коли деталь більше не має слідувати за змінами в початковому файлі.",
"help.component.capture_position":"Фіксує положення деталей, які ви пересунули вручну, і вони стають їхнім новим положенням. Використовуйте після перетягування на місце деталей, яких не утримує жодне з'єднання.",
"help.component.create":"Додає до проєкту новий порожній компонент усередині активного компонента, якщо ви не вибрали іншого батьківського. Використовуйте, щоб дати новій частині збірки власне місце для тіл і ескізів.",
"help.component.finish_edit":"Зберігає деталь, яку ви редагуєте на місці, повертається до її збірки й оновлює збірку за цією деталлю. Використовуйте, коли зміни в пов'язаній деталі завершено.",
"help.component.from_bodies":"Перетворює кожне вибране тіло на окремий компонент із назвою цього тіла. Використовуйте, коли проєкт, збудований із окремих тіл, має стати збіркою, деталі якої можна з'єднувати й переміщувати.",
"help.component.insert_design":"Вставляє інший збережений проєкт як компонент, пов'язаний зі своїм файлом, із суцільними тілами в тому вигляді, як вони є там. Використовуйте, щоб повторно застосувати деталь у збірці й підхопити пізніші зміни через «Оновити зв'язки».",
"help.component.properties":"Показує об'єм, масу, центр мас і моменти інерції компонента за матеріалами його тіл. Використовуйте, щоб перевірити вагу й баланс збірки.",
"help.component.revert_position":"Повертає деталі, які ви пересунули вручну, на попередні місця, відкидаючи переміщення, що не були зафіксовані. Використовуйте, щоб скасувати пробні переміщення в збірці.",
"help.component.update_links":"Знову зчитує пов'язані файли проєктів і замінює тіла там, де вони змінилися. Використовуйте після редагування деталі, яку використовує ця збірка.",
"help.config.configure":"Додає параметри, операції, матеріали чи вигляди як стовпці таблиці конфігурацій. Використовуйте, щоб створити варіанти одного проєкту, наприклад розміри деталі.",
"help.config.preview":"Перевіряє, чи перебудовується рядок таблиці конфігурацій, не змінюючи проєкт чи його історію. Використовуйте перед перемиканням на варіант, у якому ви не впевнені.",
"help.config.rules":"Показує правила таблиці конфігурацій, її рядки та активний рядок. Використовуйте, щоб побачити, як налаштовано варіанти проєкту.",
"help.config.table":"Показує таблицю конфігурацій: по одному рядку на варіант, по одному стовпцю на параметр чи операцію, а також чи проєкт досі відповідає активному рядку. Використовуйте, щоб переглянути варіанти проєкту.",
"help.connect_note":"Перезапустіть кожного асистента, щоб завантажити сервер SolidCraft. Перед зміною кожен файл збережено як резервну копію .bak.",
"help.connect_title":"Підключення ШІ-асистентів",
"help.construct.axis.edge":"Створює допоміжну вісь уздовж прямого ребра або прямої ескізу. Використовуйте як вісь для обертання, кругового масиву чи з'єднання.",
"help.construct.axis.normal_to_face":"Створює допоміжну вісь через точку, перпендикулярну до грані. Використовуйте як вісь, що виходить прямо з поверхні.",
"help.construct.axis.through_cylinder":"Створює допоміжну вісь через центр грані циліндра, конуса чи тора або кругового ребра. Використовуйте, щоб обертати чи розмножувати операції навколо круглої деталі.",
"help.construct.axis.two_planes":"Створює допоміжну вісь там, де сходяться дві площини або плоскі грані. Використовуйте, коли потрібна вісь — лінія між двома гранями.",
"help.construct.axis.two_points":"Створює допоміжну вісь через дві точки, вершини або точки ескізу. Використовуйте для осі, що проходить між двома відомими положеннями.",
"help.construct.plane.along_path":"Створює допоміжну площину, перпендикулярну до ребра чи кривої, у вибраному місці вздовж неї. Використовуйте, щоб накреслити профіль для протягування або переріз траєкторії.",
"help.construct.plane.at_angle":"Створює допоміжну площину, повернуту на кут від площини чи грані навколо осі або ребра. Використовуйте для похилих ескізів, наприклад косого кронштейна.",
"help.construct.plane.midplane":"Створює допоміжну площину посередині між двома площинами чи плоскими гранями або таку, що ділить навпіл кут між ними. Використовуйте як площину симетрії для дзеркального відображення.",
"help.construct.plane.offset":"Створює допоміжну площину, паралельну площині чи плоскій грані, на відстані або через точку. Використовуйте, щоб креслити на заданій висоті над гранню.",
"help.construct.plane.perpendicular":"Створює допоміжну площину, що містить пряму чи ребро й стоїть перпендикулярно до площини або грані. Використовуйте, щоб креслити на моделі вздовж ребра в прямовисній площині.",
"help.construct.plane.tangent":"Створює допоміжну площину, що дотикається до циліндра, конуса, кулі чи тора в точці. Використовуйте, щоб креслити на боці круглої деталі.",
"help.construct.plane.three_points":"Створює допоміжну площину через три точки. Використовуйте для площини, заданої положеннями на моделі, наприклад трьома кутами.",
"help.construct.plane.two_edges":"Створює допоміжну площину через два прямі ребра чи прямі, що лежать в одній площині. Використовуйте для площини через деталь, наприклад через два протилежні ребра.",
"help.construct.point.along_path":"Створює допоміжну точку в певному місці вздовж ребра чи кривої. Використовуйте як орієнтир на півшляху вздовж траєкторії.",
"help.construct.point.center":"Створює допоміжну точку в центрі кругового ребра, кола чи дуги ескізу, кулі або тора. Використовуйте як орієнтир для отворів, осей і з'єднань.",
"help.construct.point.edge_plane":"Створює допоміжну точку там, де ребро чи пряма проходить крізь площину або плоску грань. Використовуйте, щоб позначити, де траєкторія перетинає площину.",
"help.construct.point.three_planes":"Створює допоміжну точку там, де сходяться три площини чи плоскі грані. Використовуйте як орієнтир кута, навіть якщо в моделі немає вершини.",
"help.construct.point.two_edges":"Створює допоміжну точку там, де два ребра чи прямі сходяться або підходять найближче одне до одного. Використовуйте як орієнтир у віртуальному куті.",
"help.construct.point.vertex":"Створює допоміжну точку на вершині або точці ескізу. Використовуйте як орієнтир, що залишається, коли навколишній ескіз чи тіло приховано.",
"help.contact.check":"Перелічує пари деталей у наборах контактів, що проходять одна крізь одну в поточному положенні. Використовуйте, щоб знайти зіткнення перед керуванням з'єднаннями чи запуском дослідження руху.",
"help.contact.create":"Об'єднує дві чи більше деталей у набір контактів, тіла якого не можуть проходити одне крізь одне, поки рухаються з'єднання. Використовуйте для деталей, що мають зупинятися при дотику, наприклад важеля біля свого упору.",
"help.contact.disable_all":"Вимикає контакт, тож керовані з'єднання та дослідження руху більше не зупиняються там, де деталі торкаються. Використовуйте, щоб знову вільно рухати деталі або щоб велика збірка швидко реагувала.",
"help.contact.edit":"Змінює набір контактів: деталі в ньому, його назву або те, чи його придушено; також може видалити набір. Використовуйте, щоб налаштувати, які деталі не можуть проходити одна крізь одну.",
"help.contact.enable_all":"Поміщає кожну деталь збірки в один набір контактів, тож жодні дві деталі не можуть проходити одна крізь одну, поки рухаються з'єднання. Використовуйте для швидкої перевірки всього механізму.",
"help.contact.enable_sets":"Вмикає контакт для заданих вами наборів контактів, тож керовані з'єднання та дослідження руху зупиняються там, де їхні деталі проходили б одна крізь одну. Використовуйте, щоб повернути ваші набори після вимкнення контакту.",
"help.contact.list":"Перелічує набори контактів проєкту, деталі в кожному з них і чи ввімкнено контакт. Використовуйте, щоб перевірити налаштування контакту перед керуванням збіркою.",
"help.document.inspect":"Показує огляд проєкту: його компоненти, тіла, ескізи, операції та параметри. Використовуйте, щоб зорієнтуватися в проєкті, який ви створювали не самі.",
"help.document.units":"Змінює одиниці, в яких проєкт показує довжини, наприклад mm або дюйми. Геометрія зберігає розмір; змінюються лише відображення й прості числа.",
"help.edit.checkpoint":"Запам'ятовує проєкт, активний ескіз і історію скасувань у поточному стані. Використовуйте перед ризикованою спробою, від якої, можливо, захочете повернутися.",
"help.edit.restore_checkpoint":"Повертається до контрольної точки разом з історією скасувань. Використовуйте, щоб відкинути все зроблене після контрольної точки одним кроком.",
"help.explode.create":"Створює рознесений вид, що розсовує деталі від центра збірки або на задані вами переміщення. Використовуйте, щоб показати, як збірку складають, для інструкцій чи презентацій.",
"help.face.delete":"Видаляє вибрані грані, а сусідні грані закривають проміжок, або залишає його відкритим як поверхню. Використовуйте, щоб прибрати заокруглене ребро, отвір чи бобишку, що заважають.",
"help.file.insert_mesh":"Додає файл 3MF, STL, OBJ, PLY або glTF до проєкту як тіла сітки в новому компоненті. Використовуйте, щоб розмістити завантажену чи відскановану модель поруч із проєктом як орієнтир.",
"help.file.insert_step":"Додає файл STEP, IGES, FreeCAD або Rhino до проєкту як суцільні тіла в новому компоненті; деталі збірки стають вкладеними компонентами. Використовуйте, щоб імпортувати моделі від постачальників чи з інших CAD-програм.",
"help.file.save_mesh":"Зберігає тіла як сітку STL, 3MF або OBJ із вибраною вами гладкістю криволінійних граней. Використовуйте, щоб підготувати деталі до 3D-друку або для програм, які читають сітки.",
"help.file.send_to_slicer":"Зберігає вибрані тіла як файл 3MF і відкриває його у вибраному вами слайсері. Використовуйте, щоб перейти від моделі до друку одним кроком.",
"help.font_details":"Інтерфейс використовує вбудовані шрифти egui (Ubuntu Light і Hack під ліцензіями Ubuntu Font Licence та MIT/Bitstream Vera; Noto Emoji та шрифт піктограм емодзі під ліцензіями OFL і MIT). Для тексту ескізів використовується Liberation Sans (SIL OFL 1.1). Необов’язковий пакет шрифтів The Crafting Apps, craft-fonts (BIZ UDPGothic, Shippori Mincho, BIZ UDMincho, Noto Sans CJK SC, Noto Sans Arabic; SIL OFL 1.1), не входить до збірок SolidCraft.",
"help.fonts":"Шрифти",
"help.frame.member":"Розміщує профіль, наприклад трубу чи алюмінієвий профіль, уздовж прямих ескізу рами, по одному елементу на пряму. Використовуйте, щоб будувати рами, стелажі та зварні конструкції.",
"help.inspect.accessibility":"Фарбує грані, до яких інструмент може дістатися з одного напрямку, і ті, до яких не може. Використовуйте, щоб перевірити деталь на можливість обробки чи формування з цього боку.",
"help.inspect.center_of_mass":"Показує центр мас тіл — кожного окремо й усіх разом — за однорідної густини. Використовуйте, щоб перевірити баланс і те, куди деталь перекинеться.",
"help.inspect.colored_components":"Надає кожному компоненту власний тимчасовий колір, не змінюючи вигляди. Використовуйте, щоб одразу розрізняти деталі збірки.",
"help.inspect.compare":"Порівнює два тіла й показує, де в одного є матеріал, якого немає в іншого, з об'ємом і відхиленням. Використовуйте, щоб порівняти змінену чи імпортовану деталь з оригіналом.",
"help.inspect.continuity":"Перевіряє, наскільки гладко грані сходяться вздовж ребер: проміжки, злами чи стрибки кривизни, і розфарбовує шви. Використовуйте, щоб знайти місця, де поверхні сполучаються нечисто.",
"help.inspect.curvature_comb":"Малює гребені вздовж кривих, ребер чи граней, зубці яких показують, наскільки сильно вони згинаються. Використовуйте, щоб помітити плоскі ділянки, злами та нерівномірну кривизну.",
"help.inspect.curvature_map":"Розфарбовує грані за силою їхньої кривизни: червоним там, де радіус малий. Використовуйте, щоб знайти тісні місця й оцінити, наскільки гладка поверхня.",
"help.inspect.draft":"Розфарбовує грані за кутом ухилу відносно напрямку витягування, позначаючи ті, де його замало. Використовуйте, щоб перевірити деталь перед формуванням чи литтям.",
"help.inspect.environment_map":"Показує модель із відбивним, дзеркальним оздобленням. Використовуйте, щоб оцінити перебіг поверхонь за тим, як по них біжать відбиття.",
"help.inspect.interference":"Знаходить тіла, що перетинаються, і показує кожен перетин з його об'ємом. Використовуйте, щоб перевірити збірку на деталі, які зіштовхуються.",
"help.inspect.isocurve":"Малює ізопараметричні криві граней — сітку, на якій побудована поверхня. Використовуйте, щоб побачити, як тече поверхня і де вона згущується.",
"help.inspect.measure":"Вимірює довжини, відстані, кути, площі та радіуси між вибраними об'єктами або об'єм і масу тіл. Використовуйте, щоб перевірити розміри й зазори.",
"help.inspect.minimum_radius":"Знаходить найменший радіус кривизни кривих, ребер чи граней і те, де він розташований. Використовуйте, щоб перевірити, чи може інструмент або сопло пройти за формою.",
"help.inspect.section":"Розрізає вид уздовж площини та штрихує перерізані грані, не змінюючи модель. Використовуйте, щоб зазирнути всередину деталей і збірок.",
"help.inspect.zebra":"Показує чорно-білі смуги, що відбиваються на гранях моделі. Використовуйте, щоб оцінити гладкість: смуги, які обриваються чи ламаються на ребрі, вказують на поганий перехід.",
"help.joint.as_built":"З'єднує дві деталі там, де вони вже є, не переміщуючи жодну з них, і задає, як вони ще можуть рухатися. Використовуйте для деталей, які ви вже поставили в остаточне положення.",
"help.joint.cam":"Зв'язує кулачок, що обертається, зі штовхачем, тож штовхач ковзає чи гойдається, коли контур кулачка проходить під ним. Використовуйте для кулачків, ексцентриків і приводів клапанів.",
"help.joint.create":"З'єднує дві деталі у вибраних початках з'єднання й переміщує другу деталь на місце; тип з'єднання задає, як вони ще можуть рухатися. Використовуйте, щоб створити збірку, деталі якої рухаються як справжній механізм.",
"help.joint.drive":"Задає кут чи відстань з'єднання й переміщує разом з ним деталі в межах його обмежень; пов'язані з'єднання та замкнені контури слідують за ним. Використовуйте, щоб перевірити, що механізм рухається як задумано.",
"help.joint.gear":"Зв'язує два обертові з'єднання передавальним числом, тож рух одного обертає інше. Використовуйте для прямозубих коліс і зубчастих вінців, із передавальним числом за радіусами ділильних кіл або кількістю зубів.",
"help.joint.limits":"Задає, наскільки далеко з'єднання може повернутися чи зсунутися, мінімумом і максимумом, або скасовує ці межі. Використовуйте, щоб утримати шарнір, повзун чи важіль у межах його справжнього ходу.",
"help.joint.motion_link":"Пов'язує два з'єднання співвідношенням і зсувом, тож рух одного рухає інше. Використовуйте для сталого зв'язку між з'єднаннями, якого не охоплюють «Зубчаста передача», «Рейкова передача» чи «Гвинт».",
"help.joint.origin":"Розміщує іменований початок з'єднання на деталі: у центрі грані чи круглого торця, на середині ребра, у куті або в точці. Використовуйте, щоб підготувати місця кріплення з'єднань; початок, вибраний на грані, слідує за нею, коли деталь змінює розмір.",
"help.joint.rack_pinion":"Зв'язує шестірню, що обертається, з рейкою, що ковзає, тож рейка переміщується на довжину ділильного кола, яку прокочує шестірня. Використовуйте для рейкових приводів, рульового керування й лінійних столиків.",
"help.joint.reach":"Переміщує точку на деталі до цілі, змінюючи з'єднання на її ланцюзі в межах їхніх обмежень. Використовуйте, щоб поставити механізм у позу за тим, де має бути його кінець, наприклад кінчик руки робота.",
"help.joint.rigid_group":"Скріплює вибрані деталі як є, тож вони рухаються як одне ціле. Використовуйте для деталей, що належать одна до одної й не мають руху між собою.",
"help.joint.screw":"Зв'язує обертання й ковзання кроком, тож кожен оберт зсуває на цю відстань. Використовуйте для ходових гвинтів, болтів і різьбових шпинделів.",
"help.library.apply":"Застосовує матеріал чи вигляд із файлу локальної бібліотеки до тіл, граней або компонентів. Використовуйте, щоб повторно застосувати матеріали, збережені з іншого проєкту.",
"help.library.export":"Зберігає матеріали та вигляди проєкту у файл бібліотеки. Використовуйте, щоб ділитися ними або повторно застосовувати в інших проєктах.",
"help.library.inspect":"Перевіряє файл бібліотеки та перелічує його матеріали й вигляди, не змінюючи проєкт. Використовуйте, щоб побачити, що містить бібліотека, перш ніж її застосовувати.",
"help.licences":"Ліцензії",
"help.material.assign":"Задає, з чого зроблено вибрані тіла, наприклад зі сталі, алюмінію чи ABS. Використовуйте, щоб маса й вага відповідали справжній деталі.",
"help.material.properties.validate":"Перевіряє картку даних матеріалу на узгодженість чисел і пропущені значення. Використовуйте перед тим, як покладатися на ці дані для маси чи жорсткості.",
"help.mesh.convert":"Перебудовує тіло сітки, наприклад STL, у суцільне тіло з плоскими й циліндричними гранями, яке можна редагувати. Використовуйте, щоб змінювати імпортовані механічні деталі як змодельоване тіло.",
"help.mit":"Ліцензія MIT",
"help.motion.study":"Задає значення з'єднань на кроках уздовж часової шкали й відтворює їх як анімацію. Використовуйте, щоб спостерігати рух механізму за послідовністю й перевіряти зазори по дорозі.",
"help.motion.trace":"Відстежує траєкторію, якою рухається точка деталі під час дослідження руху чи керування з'єднанням, і після підтвердження зберігає її як криву 3D-ескізу. Використовуйте, щоб побачити, куди сягає механізм, або щоб будувати на його траєкторії.",
"help.notice":"NOTICE",
"help.occurrence.ground":"Закріплює деталь на місці або знову звільняє її, тож з'єднання переміщують інші деталі навколо неї. Використовуйте для рами чи основи, на якій будується решта збірки.",
"help.occurrence.move":"Переміщує екземпляр компонента в збірці",
"help.parameters.change":"Відкриває таблицю іменованих значень і виразів, що керують розмірами проєкту. Використовуйте, щоб змінити розмір в одному місці, а всі операції, які його використовують, підлаштувалися.",
"help.parameters.export":"Зберігає параметри проєкту як CSV або JSON. Використовуйте, щоб редагувати їх у таблиці або перенести до іншого проєкту.",
"help.parameters.graph":"Показує, які параметри й операції використовують які інші, а також цикли чи помилки між ними. Використовуйте, щоб побачити, на що вплине зміна параметра.",
"help.parameters.import":"Зчитує параметри з CSV або JSON у проєкт: усі або жодного. Використовуйте, щоб імпортувати значення з таблиці чи іншого проєкту.",
"help.parameters.move":"Переміщує параметр користувача перед іншим або після нього в списку. Використовуйте, щоб тримати пов'язані параметри разом.",
"help.parts.fastener":"Додає стандартний гвинт, болт, гайку, шайбу, штифт чи підшипник вибраного розміру. Розміщений на отворі, він сідає в отвір із з'єднанням, тож вам не потрібно моделювати кріплення самостійно.",
"help.parts.insert":"Вставляє стандартну деталь вибраного сімейства, розміру й довжини. Розміщена на краю чи стінці отвору, вона сідає на отвір із жорстким з'єднанням.",
"help.parts.library":"Відкриває стандартні деталі: гвинти, болти, гайки, шайби, установчі гвинти, штифти та підшипники стандартних розмірів. Використовуйте, щоб додати стандартну деталь замість того, щоб моделювати її самостійно.",
"help.parts.resize":"Змінює розмір чи довжину вставленої стандартної деталі та перебудовує її; її з'єднання тримають її на місці. Використовуйте, коли гвинт виявився задовгим або отвору потрібен інший розмір.",
"help.plastic.assign_rule":"Призначає тілам правило пластику, тож їхні пластикові операції беруть з нього ухил і зазор за замовчуванням. Використовуйте, щоб один раз налаштувати формовану деталь для всіх її операцій.",
"help.plastic.boss":"Додає бобишку під гвинт на грані: стовпчик із необов'язковими отвором, ухилом, заокругленням біля основи та ребрами жорсткості. Використовуйте для точок кріплення гвинтів у формованих чи надрукованих корпусах.",
"help.plastic.lip":"Додає губку або відповідний паз уздовж краю порожнистого тіла. Використовуйте, щоб дві половини корпусу центрувалися одна на одній і щільно закривалися.",
"help.plastic.manage_rules":"Створює й редагує правила пластику: матеріал, товщину стінки, радіуси, зазор і ухил. Використовуйте їх, щоб операції формованої деталі були узгодженими.",
"help.plastic.rest":"Додає упор на грані: круглий чи прямокутний майданчик, суцільний або порожнистий, з ухилом. Використовуйте як опору чи стійку у формованому корпусі.",
"help.plastic.snap_fit":"Додає клацковий гачок на грані із заданими довжиною, товщиною та зачепом. Використовуйте, щоб скріпити деталі защіпкою без гвинтів.",
"help.pointcloud.insert":"Вставте скан у форматі PLY, XYZ або PTS як хмару точок поряд із моделлю. Використовуйте її як довідку під час побудови моделі за виміряними даними.",
"help.sheet.convert":"Перетворює пластину або порожнисте тіло рівномірної товщини на тіло листового металу зі згинами на вибраних ребрах. Використовуйте, щоб зробити наявну деталь придатною до розгортання.",
"help.sheet.export_bend_table":"Зберігає таблицю згинів тіла листового металу як CSV або JSON: кути, радіуси та положення згинів на розгортці. Використовуйте для листогибочного преса або цеху.",
"help.sheet.export_dxf":"Зберігає розгортку як DXF із контурами, лініями згинів і за бажанням примітками до згинів. Використовуйте для лазерного, плазмового чи гідроабразивного різання.",
"help.sheet.flange":"Додає фланець: основну пластину з ескізу, стінку вздовж розімкненого контуру ескізу або зігнуту стінку на краях листа. Використовуйте, щоб будувати деталі з листового металу.",
"help.sheet.flat_pattern":"Створює розгортку тіла листового металу з її розміром, вирізами та лініями згинів. Використовуйте, щоб перевірити заготовку перед різанням.",
"help.sheet.fold":"Згинає лист уздовж прямої ескізу на заданий кут і радіус. Використовуйте, щоб зігнути плоский лист після вирізання в ньому елементів.",
"help.sheet.hem":"Загинає край листа назад на себе. Використовуйте для безпечних, жорстких країв без гострих задирок.",
"help.sheet.manage_rules":"Створює й редагує правила листового металу: товщину, радіус згину, коефіцієнт K, полегшення та проміжки. Використовуйте їх, щоб узгодити матеріал та інструменти вашої майстерні.",
"help.sheet.path_flange":"Додає ланцюг фланців уздовж краю листа за розімкненим ланцюгом прямих ескізу. Використовуйте для профілів, таких як U- чи Z-подібний, одним кроком.",
"help.sheet.perforate":"Додає поле отворів по всьому плоскому листу в шаховому чи квадратному розташуванні. Використовуйте для вентиляційних отворів, решіток і полегшених панелей.",
"help.sheet.refold":"Знову згинає розгорнуте тіло листового металу. Використовуйте після додавання елементів до плоского листа.",
"help.sheet.unfold":"Розгортає всі згини тіла листового металу. Використовуйте, щоб додати отвори чи вирізи, які мають перетинати згин, а потім знову зігнути.",
"help.sketch.arc.center_point":"Малює кругову дугу навколо центральної точки від початкової до кінцевої точки. Використовуйте, коли відомий центр дуги, наприклад радіус навколо отвору чи осі повороту.",
"help.sketch.arc.tangent":"Малює дугу, що починається в кінці прямої чи дуги й продовжує її по дотичній. Використовуйте, щоб продовжити ланцюг плавним згином замість кута.",
"help.sketch.arc.three_point":"Малює дугу від початкової до кінцевої точки через третю точку. Використовуйте, коли дуга має проходити через задані точки, а не навколо відомого центра.",
"help.sketch.arc3d":"Малює точну кругову дугу в просторі через три точки за ввімкненого 3D-ескізу. Використовуйте для згинів траєкторій і напрямних, що виходять із площини ескізу.",
"help.sketch.auto_constrain":"Додає обмеження, які ескіз майже вже має, як-от горизонтальність, паралельність чи співпадання, а потім проставляє розміри, доки він не стане повністю визначеним. Використовуйте, щоб зафіксувати приблизно накреслений ескіз одним кроком.",
"help.sketch.auto_constrain_from_datum":"Працює як «Автообмеження», але вимірює положення від вибраної вами базової точки замість початку координат. Використовуйте, коли деталь розмічено від однієї опорної точки, наприклад кута чи отвору.",
"help.sketch.blend_curve":"З'єднує кінці двох кривих плавним сплайном, дотичним до обох, або також неперервним за кривизною, якщо ви так виберете. Використовуйте, щоб перекрити проміжок між кривими без зламу.",
"help.sketch.break":"Розбиває криву на частини там, де її перетинають інші криві, або в точках, які ви на ній розмістите. Використовуйте, коли частина кривої потребує власного обмеження або її слід видалити окремо.",
"help.sketch.cancel":"Виходить з ескізу й відкидає все, що змінено відтоді, як його створено чи відкрито для редагування. Скасування дії повертає зміни.",
"help.sketch.centerline":"Перемикає прямі між звичайними та осьовими лініями — осями, які профілі не враховують. Використовуйте осьову лінію як вісь для обертання, дзеркала чи обмеження симетрії.",
"help.sketch.chamfer.distance_angle":"Скошує кут між двома прямими, заданий відстанню вздовж першої прямої та кутом. Використовуйте, коли на кресленні фаску задано довжиною й кутом, наприклад 2 mm × 30°.",
"help.sketch.chamfer.equal_distance":"Скошує кут між двома прямими на однакову відстань уздовж обох. Використовуйте для звичайної фаски 45° на контурі.",
"help.sketch.chamfer.two_distance":"Скошує кут між двома прямими, заданий окремою відстанню вздовж кожної прямої. Використовуйте для фасок, що не є 45°, заданих двома довжинами.",
"help.sketch.circle.center":"Малює коло за центром і діаметром. Використовуйте для отворів, бобишок та інших круглих елементів, центр яких відомий.",
"help.sketch.circle.three_point":"Малює коло через три точки. Використовуйте, коли коло має проходити через задані точки, наприклад наявної геометрії.",
"help.sketch.circle.three_tangent":"Малює коло, що дотикається до трьох прямих, кіл або дуг. Використовуйте, щоб вписати коло в простір між трьома кривими, наприклад вписане коло трикутника.",
"help.sketch.circle.two_point":"Малює коло за двома кінцями його діаметра. Використовуйте, коли відомі точки на краю кола, а не його центр.",
"help.sketch.circle.two_tangent":"Малює коло заданого розміру, що дотикається до двох прямих, кіл або дуг. Використовуйте для заокруглення сталого радіуса між двома кривими.",
"help.sketch.conic":"Малює конічну криву між двома кінцевими точками, форма якої задається вершинною точкою та значенням rho. Використовуйте для плавних переходів, повноту яких потрібно налаштувати, — від плоскої до майже гострого кута.",
"help.sketch.constrainer":"Застосовує обмеження, яке вибрані одна чи дві криві майже вже мають, як-от горизонтальність, паралельність, дотичність чи рівність. Використовуйте, щоб упорядкувати накреслений від руки ескіз по одному зв'язку за раз.",
"help.sketch.constraint.coincident":"Розміщує точку на іншій точці, кривій чи осі ескізу. Використовуйте, щоб закрити проміжки в профілі або розмістити точку на прямій.",
"help.sketch.constraint.collinear":"Розміщує дві прямі на одній прямій. Використовуйте, щоб вирівняти перервані краї, наприклад обидві сторони виїмки.",
"help.sketch.constraint.concentric":"Надає двом колам чи дугам спільний центр. Використовуйте для кілець, цековок і валів з уступами.",
"help.sketch.constraint.curvature":"Змушує дві криві, що сходяться в кінцевій точці, продовжуватися з однаковою кривизною (G2). Використовуйте там, де дотичного сполучення замало для плавності, наприклад на видимих поверхнях.",
"help.sketch.constraint.equal":"Робить прямі однакової довжини, а кола й дуги — однакового радіуса. Використовуйте, щоб один розмір керував кількома однаковими елементами.",
"help.sketch.constraint.fix":"Закріплює точки чи криві там, де вони є, або знову звільняє їх. Використовуйте для геометрії, що не повинна зміщуватися під час перетягування чи розв'язування ескізу.",
"help.sketch.constraint.horizontal_vertical":"Робить пряму або лінію між двома точками горизонтальною чи вертикальною — залежно від того, що ближче. Використовуйте, щоб вирівняти контур за осями ескізу.",
"help.sketch.constraint.midpoint":"Ставить точку на середину прямої або поєднує середини двох прямих. Використовуйте, щоб відцентрувати геометрію відносно ребра.",
"help.sketch.constraint.parallel":"Робить дві прямі паралельними. Використовуйте для сторін, які мають залишатися паралельними, коли змінюються інші розміри.",
"help.sketch.constraint.perpendicular":"Змушує дві прямі сходитися під прямим кутом. Використовуйте для прямих кутів між прямими, що не лежать на осях ескізу.",
"help.sketch.constraint.polygon":"Робить замкнений ланцюг прямих правильним багатокутником: рівні сторони, а кожен кут лежить на одному колі. Використовуйте, щоб зробити накреслений від руки багатокутник правильним і зберегти це.",
"help.sketch.constraint.symmetry":"Робить дві точки чи криві дзеркальним відображенням одна одної відносно прямої або точки. Використовуйте, щоб профіль залишався симетричним, коли ви змінюєте одну зі сторін.",
"help.sketch.constraint.tangent":"Змушує дві криві дотикатися по дотичній, наприклад пряму й дугу. Використовуйте для плавних сполучень без зламу.",
"help.sketch.construction":"Перемикає криві між звичайною та конструкційною геометрією, яку профілі не враховують. Використовуйте конструкційні криві як допоміжні для розмітки, орієнтирів і розмірів.",
"help.sketch.construction_line":"Створює нескінченну допоміжну пряму через дві точки. Використовуйте її для розмітки ескізу без розбиття профілів.",
"help.sketch.construction_line.angle":"Створює нескінченну допоміжну пряму під кутом до осі X ескізу. Виберіть точку й введіть кут або виберіть її напрямок.",
"help.sketch.construction_line.bisector":"Виберіть дві прямі ескізу, що перетинаються, а потім одну з двох бісектрис. Результат змінюється разом із вихідними прямими.",
@@ -1412,12 +1580,71 @@
"help.sketch.construction_line.tangent_external":"Виберіть коло або кругову дугу, потім зовнішню точку й варіант дотичної. У попередніх переглядах показано лише точки дотику на намальованій дузі.",
"help.sketch.construction_line.tangent_two":"Виберіть два кола або кругові дуги, потім виберіть спільну дотичну в попередньому перегляді. Точки дотику мають лежати на намальованих кривих.",
"help.sketch.construction_line.vertical":"Створює нескінченну вертикальну допоміжну пряму через точку. Її вертикальне обмеження зберігається під час подальших змін.",
"help.sketch.copy":"Копіює вибрані криві й точки ескізу разом з обмеженнями та розмірами між ними. Вставте їх у цей ескіз або в інший.",
"help.sketch.create":"Починає новий 2D-ескіз на площині або на плоскій грані моделі. Кожне видавлювання, обертання й протягування починається з ескізу.",
"help.sketch.cut":"Копіює вибрану геометрію ескізу й видаляє її з ескізу одним кроком скасування. Вставте її в іншому місці цього ескізу або в інший.",
"help.sketch.dimension":"Додає керівний розмір: довжину, відстань, кут, радіус чи діаметр залежно від вибраного. Введіть значення або назву параметра, і ескіз підлаштується.",
"help.sketch.edit":"Відкриває наявний ескіз для редагування. Операції, побудовані на ньому, оновлюються, коли ви завершуєте ескіз.",
"help.sketch.ellipse":"Малює еліпс за його центром, кінцем великої осі та точкою на малій стороні. Використовуйте для овальних отворів, кулачків та інших видовжених округлих форм.",
"help.sketch.equation_curve":"Створює криву за параметричними рівняннями X(t), Y(t) у площині ескізу.",
"help.sketch.extend":"Подовжує пряму чи дугу до найближчої кривої на її шляху або нарощує дві криві, доки вони не зустрінуться. Використовуйте, щоб закрити проміжки в профілі після обрізання чи редагування.",
"help.sketch.fillet":"Заокруглює кут, де сходяться дві прямі чи дуги, дугою заданого радіуса. Кілька кутів, заокруглених разом, мають один радіус.",
"help.sketch.finish":"Виходить з ескізу й повертається до моделі. Його замкнені профілі стають готовими до «Видавлювання», «Обертання» й інших операцій.",
"help.sketch.finish_auto_constrain":"Виконує «Автообмеження» для ескізу, а потім завершує його. Використовуйте, щоб залишити ескіз повністю визначеним одним кроком.",
"help.sketch.fit_curves_to_section":"Розрізає тіло сітки чи суцільне тіло площиною ескізу й підганяє прямі та дуги до перерізу. Використовуйте, щоб відновити відскановану чи імпортовану деталь як ескіз, який можна редагувати.",
"help.sketch.include_3d":"Переносить ребра, вершини моделі й криві інших ескізів до цього ескізу як пов'язані посилання, сплющуючи ті, що поза його площиною, на неї. Використовуйте, щоб будувати на геометрії, яка не лежить у площині ескізу.",
"help.sketch.infinite":"Перемикає прямі між звичайними та нескінченними допоміжними прямими, що проходять через увесь вид. Використовуйте їх як орієнтири розмітки, які ніколи не виявляться закороткими.",
"help.sketch.insert_dxf":"Зчитує криві креслення DXF в ескіз, масштабовані, повернуті й розміщені так, як ви задасте. Використовуйте, щоб будувати на 2D-кресленні з іншої програми, наприклад на контурі для лазерного різання.",
"help.sketch.insert_svg":"Зчитує контури малюнка SVG в ескіз, масштабовані, повернуті й розміщені так, як ви задасте. Використовуйте, щоб перетворити логотип або векторний контур на криві, які можна видавити.",
"help.sketch.inspect":"Відкриває звіт про відкритий ескіз: скільки ступенів вільності залишилося і чи він повністю обмежений. Використовуйте його, щоб дізнатися, що ще рухається, перш ніж завершити ескіз.",
"help.sketch.intersect":"Додає криві чи точки, де тіла, грані, ребра або інші ескізи перетинають площину ескізу. Вони залишаються пов'язаними й слідують за моделлю, коли вона змінюється.",
"help.sketch.intersection_curve":"Створює 3D-криві там, де сходяться два тіла чи грані, пов'язані з ними. Використовуйте їх як траєкторії або напрямні, що слідують за моделлю.",
"help.sketch.isoparametric_curve":"Створює 3D-криву, пов'язану з гранню, вздовж напрямку U або V грані через вибрану вами точку. Використовуйте як траєкторію або лінію розділення, що слідує за поверхнею.",
"help.sketch.line":"Малює з'єднані прямі точка за точкою — як розімкнений ланцюг або замкнений контур. Це основний інструмент для більшості профілів.",
"help.sketch.line.midpoint":"Малює пряму від її середини до одного кінця, а другий кінець відображається дзеркально. Використовуйте для прямих, центрованих на точці, наприклад симетричного краю.",
"help.sketch.line3d":"Малює з'єднані прямі між точками в просторі за ввімкненого 3D-ескізу. Використовуйте для траєкторій і рам, що виходять із площини ескізу.",
"help.sketch.mirror":"Віддзеркалює криві й точки ескізу відносно прямої або осі та додає обмеження симетрії. Використовуйте, щоб накреслити половину симетричного профілю й доповнити його.",
"help.sketch.move":"Переміщує або повертає криві й точки ескізу чи їхню копію. Використовуйте, щоб змінити положення геометрії, зберігши її форму й обмеження.",
"help.sketch.offset":"Створює копію ланцюга кривих на заданій відстані з одного чи обох боків. Використовуйте для стінок, контурів і зазорів; відстань залишається розміром, який можна редагувати.",
"help.sketch.paste":"Вставляє в активний ескіз геометрію ескізу, яку ви скопіювали чи вирізали. Розмістіть її в точці або зсуньте на відстань.",
"help.sketch.pattern.circular":"Копіює геометрію ескізу навколо центральної точки по повному колу або на заданий кут. Використовуйте для кіл розташування болтів, спиць і зубів.",
"help.sketch.pattern.rectangular":"Копіює геометрію ескізу рядками й стовпцями із заданими проміжками. Використовуйте для сіток отворів, пазів чи вентиляційних прорізів.",
"help.sketch.point":"Ставить точку ескізу. Використовуйте як орієнтир для розмірів, обмежень, центрів отворів або пізніших операцій.",
"help.sketch.point3d":"Ставить точку в просторі за ввімкненого 3D-ескізу. Використовуйте як орієнтир для 3D-кривих і траєкторій.",
"help.sketch.polygon.circumscribed":"Малює правильний багатокутник навколо кола, розмір якого задано від центра до середини сторони. Використовуйте, коли відомий розмір під ключ, як для шестигранної гайки.",
"help.sketch.polygon.edge":"Малює правильний багатокутник за двома кінцями однієї сторони. Використовуйте, коли відомі довжина й положення сторони.",
"help.sketch.polygon.inscribed":"Малює правильний багатокутник усередині кола, розмір якого задано від центра до кута. Використовуйте, коли відомий розмір між протилежними кутами.",
"help.sketch.project":"Переносить ребра, грані, вершини моделі та криві інших ескізів до цього ескізу, спроєктовані на його площину. Вони залишаються пов'язаними й слідують за моделлю, коли вона змінюється.",
"help.sketch.project_to_surface":"Проєктує криві інших ескізів уздовж нормалі цього ескізу на грань як пов'язані 3D-криві. Використовуйте, щоб нанести логотип, лінію розділення чи траєкторію на криву поверхню.",
"help.sketch.rectangle.center":"Малює прямокутник за центром і одним кутом. Використовуйте для контурів, центрованих на точці, наприклад на початку координат.",
"help.sketch.rectangle.rounded":"Малює прямокутник із чотирма кутами, заокругленими одним радіусом. Використовуйте для пластин, кришок і отворів із заокругленими кутами.",
"help.sketch.rectangle.three_point":"Малює прямокутник за одним краєм і точкою на протилежній стороні. Використовуйте для прямокутників, повернутих під кутом до осей ескізу.",
"help.sketch.rectangle.two_point":"Малює прямокутник за двома протилежними кутами. Використовуйте для контурів пластин, блоків і кишень.",
"help.sketch.scale":"Масштабує криві й точки ескізу на коефіцієнт відносно базової точки. Використовуйте, щоб змінити розмір частини ескізу, не креслячи її знову.",
"help.sketch.slot.arc_center":"Малює дуговий паз заданої ширини вздовж дуги, заданої центром, початком і кінцем. Використовуйте для регулювальних пазів навколо осі повороту.",
"help.sketch.slot.arc_three_point":"Малює дуговий паз заданої ширини вздовж дуги через три точки. Використовуйте, коли траєкторія паза має проходити через задані точки.",
"help.sketch.slot.center_point":"Малює прямий паз заданої ширини від його центра до центра однієї кінцевої дуги. Використовуйте для пазів, центрованих на точці.",
"help.sketch.slot.center_to_center":"Малює прямий паз заданої ширини між центрами двох його кінцевих дуг. Використовуйте для пазів, розмір яких задано від центру до центру, наприклад регулювальних пазів для гвинтів.",
"help.sketch.slot.overall":"Малює прямий паз заданої ширини від одного зовнішнього кінця до іншого. Використовуйте, коли важлива загальна довжина паза.",
"help.sketch.spline.control_point":"Малює кубічний сплайн, форма якого задається контрольними точками, крізь які він не проходить. Використовуйте для плавних, текучих кривих, які ви формуєте переміщенням точок.",
"help.sketch.spline.control_point_5":"Малює сплайн 5-го степеня, форма якого задається контрольними точками. Використовуйте там, де криві мають сполучатися з плавнішою кривизною, наприклад на видимих дизайнерських поверхнях.",
"help.sketch.spline.fit_point":"Малює плавний сплайн, що проходить через кожну розміщену вами точку, розімкнений чи замкнений. Використовуйте, щоб обвести форму через відомі точки.",
"help.sketch.spline3d":"Малює плавну криву в просторі через точки за ввімкненого 3D-ескізу. Використовуйте для траєкторій протягування та прокладання кабелів, що виходять із площини ескізу.",
"help.sketch.spun_profile":"Створює в площині ескізу контур, який тіло описує, обертаючись навколо осі. Використовуйте, щоб отримати силует точеної деталі для обертання чи креслення.",
"help.sketch.text":"Пише текст в ескізі вибраним шрифтом, висотою та під вибраним кутом; його слова можуть залежати від параметрів. Видавіть його або витисніть для написів і підписів.",
"help.sketch.transform":"Масштабує, повертає й переміщує геометрію ескізу відносно центральної точки одним кроком. Використовуйте, щоб одразу змінити положення й розмір виділеного.",
"help.sketch.trim":"Видаляє частину кривої між найближчими перетинами навколо місця, де ви клацнули. Використовуйте, щоб очистити лінії, що накладаються, до замкненого профілю.",
"help.solid.align":"Переміщує вибрані тіла так, щоб точка, грань чи площина на них зійшлася з точкою, гранню чи площиною деінде. Використовуйте, щоб притиснути деталь до іншої, не вимірюючи зсуву.",
"help.solid.boundary_fill":"Створює суцільні тіла з областей, обмежених тілами-інструментами, що перекриваються, заповнюючи лише вибрані області. Використовуйте, щоб побудувати форму з простору, який разом обмежують кілька тіл.",
"help.solid.bounding_solid":"Створює прямокутний паралелепіпед, що охоплює вибрані тіла, за потреби із запасом. Використовуйте, щоб побачити габарити деталі або як заготовку, з якої її обробляють.",
"help.solid.box":"Створює куб (паралелепіпед) за довжиною, шириною й висотою від кутової точки або з центром у точці. Використовуйте для швидкого блока, заготовки-заповнювача чи тіла, у якому вирізають елементи.",
"help.solid.chamfer":"Зрізає вибрані ребра плоским скосом на заданій відстані. Використовуйте, щоб притупити гострі ребра або полегшити вставляння штифта чи гвинта.",
"help.solid.coil":"Створює гвинтове тіло, наприклад пружину, за діаметром, кількістю витків, висотою чи кроком і круглим або квадратним перерізом. Використовуйте для пружин, спіралей і гвинтових гребенів.",
"help.solid.combine":"Об'єднує тіла, вирізає їх із цільового тіла або залишає лише спільний для них об'єм, і може зберегти тіла-інструменти. Використовуйте, щоб з'єднати деталі, вирізати одну форму іншою або знайти, де два тіла перекриваються.",
"help.solid.cone":"Створює конус за колом основи та висотою або усічений конус, коли верх теж має радіус. Використовуйте для конічних звужень, лійок, зенківок і вістер.",
"help.solid.cylinder":"Створює циліндр за радіусом чи діаметром і висотою, що стоїть на точці вздовж осі. Використовуйте для валів, штифтів, бобишок і круглих заготовок.",
"help.solid.draft":"Нахиляє вибрані грані на заданий кут відносно нейтральної площини. Використовуйте для литих чи формованих деталей, щоб вони виймалися з форми.",
"help.solid.emboss":"Піднімає профілі ескізу, наприклад текст чи логотип, над гранню або заглиблює їх у неї. Використовуйте для написів, етикеток і маркування на плоских чи округлих гранях.",
"help.solid.extrude":"Витягує профіль ескізу в 3D на задану відстань, додаючи або видаляючи матеріал. Використовуйте, щоб перетворити плоский контур на брусок, бобишку або кишеню.",
"help.solid.fillet":"Закруглює вибрані ребра плавним круговим переходом заданого радіуса. Використовуйте, щоб пом'якшити гострі ребра для міцності, зручності чи вигляду.",
"help.solid.hole":"Просвердлює круглий отвір заданого діаметра в обраній точці на грані. Використовуйте для отворів під гвинти, штифтів та інших простих круглих отворів.",
@@ -1426,20 +1653,60 @@
"help.solid.move":"Переміщує або обертає вибрані тіла (чи їхню копію) на задану відстань і кут. Використовуйте, щоб змінити положення тіла або створити друге в іншому місці.",
"help.solid.offset_face":"Виштовхує або втягує вибрані грані на задану відстань, а навколишні грані слідують за ними. Використовуйте, щоб зробити стінку товщою, кишеню глибшою, а бобишку вищою без редагування ескізу.",
"help.solid.pattern.circular":"Повторює вибрані об'єкти навколо осі задану кількість разів на заданий повний кут. Використовуйте для кіл розташування болтів, спиць, оребрення та зубців.",
"help.solid.pattern.path":"Копіює операції чи тіла вздовж траєкторії ескізу за кількістю та кроком. Використовуйте для отворів уздовж криволінійного ребра чи деталей уздовж напрямної.",
"help.solid.pattern.rectangular":"Повторює вибрані об'єкти в одному або двох напрямках із заданими кількістю та кроком. Використовуйте для рядів і сіток отворів, ребер жорсткості, штифтів або ніжок.",
"help.solid.pipe":"Створює круглу трубу вздовж траєкторії з кривих ескізу, суцільну чи порожнисту із заданою товщиною стінки. Використовуйте для труб, дротів, кабелів і напрямних.",
"help.solid.press_pull":"Додає або видаляє матеріал, коли ви тягнете грань, або заокруглює ребра, коли тягнете їх. Використовуйте для швидких змін просто на моделі.",
"help.solid.remove":"Забирає вибрані тіла з проєкту, починаючи з цієї точки часового ланцюжка; попередні кроки їх зберігають. Використовуйте, щоб відкинути допоміжне тіло, наприклад інструмент різання, який уже не потрібен.",
"help.solid.replace_face":"Переносить вибрані плоскі грані на площину або на паралельну грань, і тіло зростає чи зменшується до неї. Використовуйте, щоб вирівняти грань урівень з іншою деталлю або допоміжною площиною.",
"help.solid.revolve":"Обертає профіль ескізу навколо осі, утворюючи кругле тіло. Використовуйте для валів, ручок, чаш та будь-яких деталей, круглих навколо осьової лінії.",
"help.solid.rib":"Додає тонку стінку вздовж розімкненої кривої ескізу, що сягає до найближчих граней тіла. Використовуйте, щоб зміцнити стінки й кути, наприклад у формованих чи надрукованих деталях.",
"help.solid.scale":"Збільшує або зменшує вибрані тіла на коефіцієнт: однаковий у всіх напрямках або окремий для кожної осі. Використовуйте, щоб змінити розмір імпортованої форми або врахувати усадку.",
"help.solid.shell":"Робить тіло порожнистим, залишаючи стінки заданої товщини, і може відкривати вибрані грані. Використовуйте для коробок, кришок та інших тонкостінних деталей.",
"help.solid.sphere":"Створює кулю за радіусом чи діаметром навколо центральної точки. Використовуйте для куль, ручок і заокруглених кінців.",
"help.solid.split_body":"Розрізає тіло на окремі тіла площиною, гранню іншого тіла або лінією ескізу. Використовуйте, щоб отримати деталі, які друкуються, обробляються чи фарбуються окремо.",
"help.solid.split_face":"Ділить вибрані грані за площиною, гранню іншого тіла або кривими ескізу, не розрізаючи тіла. Використовуйте, щоб надати частині грані власний ухил, колір чи зсув.",
"help.solid.sweep":"Протягує профіль ескізу вздовж траєкторії, утворюючи суцільне тіло. Використовуйте для труб, напрямних, ручок і будь-якої деталі зі сталим перерізом, що йде за кривою.",
"help.solid.thread":"Додає метричну різьбу ISO на циліндричну грань — або косметичну, або вирізану в тілі. Використовуйте для болтів, різьбових отворів і надрукованих гвинтових деталей.",
"help.solid.torus":"Створює кільце за великим радіусом навколо його осі та малим радіусом його круглого перерізу. Використовуйте для O-подібних кілець, ручок і круглих намистин.",
"help.solid.web":"Додає тонку стінку вздовж кожної розімкненої кривої ескізу, кожна з яких сягає до найближчих граней тіла. Використовуйте для сітки опорних стінок усередині корпусів і лотків.",
"help.surface.blend":"Створює поверхню, що з'єднує ребра двох тіл, дотичну або неперервну за кривизною до обох. Використовуйте, щоб плавно з'єднати дві поверхні через проміжок.",
"help.surface.boundary":"Створює поверхню, що заповнює контур із двох-чотирьох кривих ескізу або сітку кривих. Використовуйте для вільних панелей, заданих своїми краями.",
"help.surface.extend":"Подовжує поверхню за її краї на відстань або до площини чи грані. Використовуйте, щоб поверхні перекривалися перед обрізанням чи зшиванням.",
"help.surface.extrude":"Видавлює криві чи профілі ескізу на відстань у поверхню — лише стінки, без торців. Використовуйте для тонких стінок і для інструментів різання чи розділення.",
"help.surface.fair":"Згладжує внутрішню частину вільних граней, залишаючи їхні краї на місці. Використовуйте, щоб вирівняти горби й хвилясті відбиття на поверхні.",
"help.surface.loft":"Створює поверхню, що послідовно проходить через два чи більше перерізів, без торців. Використовуйте для оболонок і переходів між різними формами.",
"help.surface.match":"Перебудовує край поверхні так, щоб він сходився з краєм іншого тіла з відповідною дотичністю чи кривизною. Використовуйте, щоб плавно закрити шов між двома поверхнями.",
"help.surface.offset":"Створює копію граней на відстані вздовж їхніх нормалей як нове поверхневе тіло. Використовуйте для оболонок-шкірок, зазорів або іншого боку стінки.",
"help.surface.patch":"Заповнює область ескізу чи замкнений контур ребер гранню, плоскою або плавно вигнутою. Використовуйте, щоб закрити отвори в поверхневому тілі.",
"help.surface.reverse_normal":"Перевертає грані поверхневого тіла, тож їхній зовнішній бік дивиться в інший бік. Використовуйте перед потовщенням чи зшиванням, коли грані спрямовані всередину.",
"help.surface.revolve":"Обертає криві чи профілі ескізу навколо осі в поверхню, без торців. Використовуйте для круглих оболонок, як-от абажури, чаші й сопла.",
"help.surface.ruled":"Створює смугу з прямих ліній від ланцюга ребер уздовж нормалі грані, дотичної або під кутом. Використовуйте для стінок з ухилом, виходів і поверхонь рознімання.",
"help.surface.stitch":"Зшиває поверхневі тіла разом уздовж спільних ребер, утворюючи суцільне тіло, коли вони замикаються. Використовуйте, щоб перетворити набір поверхонь на одне тіло.",
"help.surface.sweep":"Переміщує криві чи профілі ескізу вздовж траєкторії в поверхню, без торців. Використовуйте для ринв, обкладок та інших тонких форм, що йдуть уздовж траєкторії.",
"help.surface.thicken":"Надає поверхневому тілу товщину, перетворюючи його на суцільне. Використовуйте, щоб створювати з поверхонь деталі для друку чи механічної обробки.",
"help.surface.trim":"Розрізає поверхню площиною, іншою поверхнею чи кривими ескізу й залишає вибраний бік. Використовуйте, щоб надати поверхням форми перед зшиванням.",
"help.surface.unstitch":"Розділяє грані тіла на окремі поверхневі тіла; суцільне тіло розпадається на поверхні. Використовуйте, щоб переробляти окремі грані тіла.",
"help.surface.untrim":"Прибирає отвори з грані або повертає її зовнішню межу до природних меж поверхні. Використовуйте, щоб повернути повну поверхню після обрізання.",
"help.timeline.compute_all":"Перебудовує кожну операцію часового ланцюжка з початку. Використовуйте, щоб оновити модель і побачити, які операції завершуються помилкою.",
"help.timeline.delete":"Видаляє вибрані операції з часового ланцюжка; видалення ескізу видаляє й операції, побудовані на ньому. Використовуйте, щоб прибрати крок, який більше не потрібен.",
"help.timeline.dependents":"Перелічує операції, які буде видалено разом з операцією, і ті, що перестануть працювати без неї. Використовуйте перед видаленням чи зміною операції.",
"help.timeline.play":"Відтворює решту операцій по одній, із паузою в півсекунди після кожного перебудування. Виконайте цю команду ще раз або натисніть Esc, щоб зупинити; «Перейти в кінець» переходить одразу.",
"help.view.apply":"Повертає вид до стандартного напрямку, як-от спереду, зверху чи ізометрія, або до збереженого іменованого виду. Використовуйте, щоб дивитися на модель із фіксованого кута.",
"help.view.delete":"Видаляє збережений іменований вид. Модель не змінюється.",
"help.view.fit":"Масштабує й зсуває вид так, щоб уся модель або виділене заповнювала його. Використовуйте, коли модель зникла з поля зору.",
"help.view.grid":"Показує чи ховає сітку у вікні перегляду. Використовуйте як орієнтир розмірів і напрямків під час моделювання.",
"help.view.ground_shadow":"Показує чи ховає тінь моделі на землі. Використовуйте, щоб легше оцінювати висоту й положення.",
"help.view.home":"Повертає вид до головного напрямку й вміщує модель. Використовуйте, щоб швидко повернутися до відомого виду.",
"help.view.list":"Перелічує іменовані види, збережені в проєкті. Використовуйте, щоб знайти вид, який ви зберегли раніше.",
"help.view.navigate":"Повертає, панорамує чи масштабує вид кроками, наприклад на чверть оберту ліворуч. Використовуйте, щоб точно переміщувати камеру замість перетягування.",
"help.view.navigation_bar":"Показує чи ховає панель навігації внизу вікна перегляду. Сховайте її, щоб звільнити місце, або покажіть, щоб мати доступ до інструментів виду мишею.",
"help.view.rename":"Дає збереженому іменованому виду нову назву. Сам вид не змінюється.",
"help.view.save":"Зберігає поточне положення камери як іменований вид у проєкті. Використовуйте, щоб пізніше повернутися до того самого кута, наприклад для знімків екрана.",
"help.view.spin":"Безперервно обертає вид навколо моделі до наступного клацання чи натискання клавіші. Використовуйте, щоб показати модель з усіх боків.",
"help.view.tool":"Фіксує інструмент камери — обертання, панорамування чи масштаб, — тож перетягування лівою кнопкою миші рухає вид, доки ви його не вимкнете. Використовуйте на трекпаді або без середньої кнопки миші.",
"help.view.visual_style":"Перемикає спосіб відображення моделі: затінена з ребрами чи без них, каркас або з прихованими ребрами. Використовуйте каркас, щоб зазирнути всередину, а затінення — для чистого вигляду.",
"history.sketch_under_constrained":"Ескіз має {count} ступенів вільності",
"history.sketch_under_constrained_one":"Ескіз має {count} ступінь вільності",
"nav.hfss.help":"Alt+ліва панорамує, Shift+Alt+ліва масштабує, Ctrl+ліва з порожнього місця обертає",
"nav.inventor.help":"Середня панорамує, Shift+середня обертає, Ctrl+середня масштабує, права обертає",
"nav.maya.help":"Alt+ліва обертає, Alt+середня панорамує, Alt+права масштабує; середня також панорамує",
"nav.nx.help":"Середня обертає, Shift+середня панорамує (у NX — середня + права), Ctrl+середня масштабує (у NX — середня + ліва); права не рухає камеру",
"nav.openscad.help":"Ліва обертає по порожньому місцю, Shift+ліва виділяє рамкою, геометрію ескізу перетягують для редагування; права або середня панорамує, Shift+права або Shift+середня масштабує",
"nav.perspective.sketch":"Редагування ескізу використовує ортографічний вид. Завершіть ескіз, щоб увімкнути перспективу.",
"parameters.apply_live":"Застосовувати кожну зміну, коли ви залишаєте її поле",
"parameters.apply_live_tip":"Вимкнено: зміни чекають на «Застосувати» або OK, після чого проєкт один раз перебудовується для всіх. «Скасувати» чи Esc відкидає їх.",
"parameters.held":"Змін, що чекають на «Застосувати»: {count}",
"parameters.held_hint":"Змінюйте вирази та одиниці. Зміни чекають на «Застосувати» або OK.",
"parameters.held_one":"1 зміна чекає на «Застосувати»",
"parts.automatic_name":"автоматично",
"parts.dimension.across_flats":"Розмір під ключ",
"parts.dimension.bore":"Діаметр отвору",
@@ -1848,6 +2121,8 @@
"prefs.bottom_centre":"Внизу по центру",
"prefs.bottom_right":"Внизу праворуч",
"prefs.browser":"Браузер",
"prefs.browser_components_open":"Компоненти розгорнуті з початку",
"prefs.browser_components_open_note":"Кожен компонент у браузері одразу розгорнутий, як раніше, а не згорнутий, доки ви його не розгорнете.",
"prefs.browser_eye_left":"Око поруч зі стрілкою згортання",
"prefs.browser_eye_left_note":"Рядки браузера показують око «показати/приховати» поруч зі стрілкою згортання, як і раніше, а не в стовпці на правому краї рядків.",
"prefs.browser_reveal_on_hover":"Показувати в браузері при наведенні",
@@ -1869,6 +2144,8 @@
"prefs.ctrl_cmd":"Ctrl / Cmd",
"prefs.curved_surfaces":"Криві поверхні",
"prefs.curves":"Криві поверхні",
"prefs.dark_parts_shading":"Зберігати форму темних деталей",
"prefs.dark_parts_shading_help":"Затінювати вид у лінійному світлі з м'яким заповнювальним світлом неба, щоб темні грані зберігали градієнт, а не ставали чорними",
"prefs.dead_zone_note":"Заштрихована смуга — це мертва зона: рух у її межах ігнорується.",
"prefs.default":"типово",
"prefs.design":"Типові параметри проєкту",
@@ -1883,6 +2160,8 @@
"prefs.edges":"Ребра та затінення",
"prefs.extend":"Розширення",
"prefs.extra_navigation":"Ctrl+перетягування лівою на порожньому місці обертає; утримуйте Space, щоб панорамувати.",
"prefs.extrude_view_isometric":"Повертати вид до ізометрії під час відкриття «Видавлювання»",
"prefs.extrude_view_return":"Повертати попередній вид під час закриття «Видавлювання»",
"prefs.follows_os":"Як у системі",
"prefs.font":"Шрифт",
"prefs.font_fallback":"Символи, яких немає у вибраному шрифті, беруться з вбудованого, тож жоден напис не показує порожній квадрат.",
@@ -1898,6 +2177,7 @@
"prefs.graphics_card_auto":"Автоматично",
"prefs.graphics_card_missing":"Збережена відеокарта недоступна; використовується режим «Автоматично».",
"prefs.graphics_card_restart":"Набуває чинності після перезапуску SolidCraft. Змінна WGPU_ADAPTER_NAME перевизначає цей вибір.",
"prefs.graphics_card_unused":"Збережену відеокарту для цього вікна не використано; використану відеокарту показано в меню Довідка › Про SolidCraft і в рядку стану. Спробуйте «Автоматично» або вкажіть для WGPU_ADAPTER_NAME унікальну частину назви відеокарти.",
"prefs.graphics_note":"Обміняйте швидкість на плавність. Кожен варіант показує свій ефект на зразку.",
"prefs.graphics_presets_note":"Набори задають наведені нижче параметри разом.",
"prefs.hide_constraint_glyphs_zoomed_out":"Ховати позначки обмежень на віддаленому виді",
@@ -1912,6 +2192,8 @@
"prefs.history_sketches_note":"Якщо для «Ескізи» вибрано «Під своєю операцією», Історія ліворуч показує кожен ескіз на один рівень глибше, під першою операцією, побудованою з нього, коли панель достатньо широка для назв. Часовий ланцюжок знизу завжди зберігає порядок створення.",
"prefs.history_sketches_under_feature":"Під своєю операцією",
"prefs.hold_stop_snapping":"Утримуйте, щоб вимкнути прив'язування",
"prefs.home_fit_size":"Розмір для «Головний вид» і «Вмістити»",
"prefs.home_fit_size_note":"Яку частину виду займає модель, коли її кадрують «Головний вид», «Вмістити», відкритий проєкт або зміна виду в навігаторі, незалежно від того, чи ввімкнено параметр нижче. 100 %: заповнює вид між панелями, компасом і панеллю навігації.",
"prefs.icons_only":"Лише піктограми",
"prefs.imported_file":"Імпортований файл",
"prefs.in_browser":"У браузері",
@@ -1920,13 +2202,20 @@
"prefs.interface_language":"Мова інтерфейсу",
"prefs.interface_note":"Як виглядає SolidCraft і де розташовані його частини.",
"prefs.interval_minutes":"{n} хв",
"prefs.invert_navigator_arrows":"Інвертувати стрілки обертання куба виду",
"prefs.invert_navigator_arrows_note":"Стрілки навколо куба обертають камеру в той бік, куди вказують, як у Fusion та Inventor: стрілка ліворуч вказує праворуч і повертає камеру праворуч. Вимк.: стрілка обертає куб у той бік, де вона розташована, тож ліва стрілка повертає камеру ліворуч. Вигнуті стрілки крену не змінюються.",
"prefs.keep_work_on_tab_switch":"Зберігати відкриті діалоги та інструменти під час перемикання між проєктами",
"prefs.keep_work_on_tab_switch_note":"Кожна вкладка проєкту зберігає свій відкритий діалог чи інструмент разом із тим, що ви в ньому вибрали й ввели, а також свою вкладку панелі інструментів. Вони знову на місці, коли ви повертаєтеся до проєкту. Вимк.: перемикання проєктів скасовує їх і показує вкладку «Модель».",
"prefs.labels":"Підписи",
"prefs.language_system":"Системна",
"prefs.layout":"Компонування",
"prefs.layout_note":"«Компактне» прикріплює панелі до країв вікна. Прозорість браузера доступна в режимі «Плаваюче». Сторону Асистента можна змінити на сторінці «Асистент».",
"prefs.left":"Ліворуч",
"prefs.left_click":"Клацання лівою",
"prefs.line_drag_draws_one":"Перетягування відрізка малює один елемент",
"prefs.line_drag_draws_one_note":"Замість безперервного малювання при перетягуванні",
"prefs.line_hover_tangent_arc":"Затриматися на останній точці прямої, щоб перейти до дотичної дуги",
"prefs.line_hover_tangent_arc_note":"В інструменті «Пряма» після того, як сегмент накреслено, відведіть вказівник від останньої точки ланцюжка, поверніться й утримуйте його на ній нерухомо: наступне клацання завершить дотичну дугу, а той самий жест поверне до прямих. Вимк.: затримка там нічого не робить.",
"prefs.linked_designs":"Пов'язані проєкти",
"prefs.live_input":"Поточне введення",
"prefs.live_preview":"Попередній перегляд у реальному часі",
@@ -1950,6 +2239,8 @@
"prefs.mouse_mapping":"Призначення кнопок миші",
"prefs.navigation":"Навігація",
"prefs.navigation_note":"Як миша, трекпад і 3D-миша рухають вид.",
"prefs.navigator_fit":"Вміщувати модель після зміни виду в навігаторі",
"prefs.navigator_fit_note":"Грань, кут або стрілка куба виду чи вісь гізмо також дивляться на середину моделі з єдиної відстані, з якої її видно цілком з усіх боків (її обмежувальна сфера). «Головний вид» за ввімкненого параметра використовує той самий масштаб і центр, тож види, вибрані після нього, лише повертаються. Вимк.: вид повертається на місці, зберігаючи свою ціль і масштаб.",
"prefs.network_host_remove":"Вилучити",
"prefs.network_locations":"Дозволяти мережеві розташування в проєктах",
"prefs.network_locations_note":"Вимкнено: пов'язані файли проєкту на іншому комп'ютері (\\\\server\\share) відкриваються лише з перелічених тут серверів або після того, як ви дозволите один, коли запитають.",
@@ -1962,6 +2253,8 @@
"prefs.origin_plane_names":"Назви площин початку координат",
"prefs.origin_plane_names_note":"Назви, що показуються в браузері, діалогах і списках. {top} — це XY, {front} — XZ, {right} — YZ, а Z спрямована вгору. Команди, скрипти й збережені проєкти зберігають XY, XZ і YZ.",
"prefs.overall_speed":"Загальна швидкість",
"prefs.parameter_list_rows":"Рядків у списку параметрів",
"prefs.parameter_list_rows_tip":"Стрілка вниз у порожньому полі значення показує список параметрів, спершу обрані, до цієї кількості. Менше число робить список легшим у великому проєкті.",
"prefs.persistent_ribbon_pressed":"Підсвічувати активні команди стрічки",
"prefs.persistent_ribbon_pressed_help":"Підсвічувати команди стрічки, поки їхні ефекти ввімкнені. Вимкніть, щоб зберегти попередній нейтральний вигляд і довідку команд.",
"prefs.perspective_fov":"Кут огляду перспективи",
@@ -1996,6 +2289,8 @@
"prefs.render_previous_geometry_budget":"Бюджет попередньої геометрії для візуалізації",
"prefs.render_previous_geometry_budget_help":"Максимальний обсяг пам'яті для кешу геометрії попереднього стану",
"prefs.ribbon_click_ends_tool_note":"Клацання підсвіченої кнопки використовуваного інструмента ескізу на стрічці завершує інструмент, тож клацання на виді знову виділяють об'єкти. Вимк.: клацання знову запускає інструмент.",
"prefs.ribbon_reveal":"Показувати результати пошуку на стрічці",
"prefs.ribbon_reveal_note":"Наведення курсора на результат у «Пошуку команд» показує, де команда розташована на стрічці: її вкладку, кнопку або рядок у випадному меню панелі. Команда, запущена з пошуку, блимає там, а запущена команда з випадного меню позначає свою панель.",
"prefs.right_click":"Клацання правою",
@@ -2025,6 +2320,8 @@
"prefs.sketch_exit_view.previous":"Повернутися до попереднього виду",
"prefs.sketch_exit_view.unless_rotated":"Повернутися, якщо вид не оберталося",
"prefs.sketch_exit_view_note":"Куди переходить вид після «Завершити ескіз», «Скасувати» або подвійного Esc.",
"prefs.sketch_face_activates_part":"Ескіз на грані деталі робить цю деталь активною",
"prefs.sketch_face_activates_part_note":"Ескіз, розпочатий на грані тіла іншого компонента, спершу активує цей компонент, тож ескіз належить йому й у браузері залишається з цією деталлю. Після цього деталь залишається активною. Вимк.: ескіз належить активному компоненту.",
"prefs.sketch_open_look_at":"Повертати вид до ескізу під час його відкриття",
"prefs.sketch_open_look_at_note":"Вимкнено: створення чи редагування ескізу не змінює вид. «Наведення» повертає вид до ескізу, коли ви цього захочете.",
"prefs.sketch_recent_snap":"Автоприв'язка до нещодавніх центрів і середніх точок",
@@ -2038,6 +2335,8 @@
"prefs.sketch_tab_always_note":"Вкладка «Ескіз» залишається на стрічці одразу після вкладки «Модель», поки жоден ескіз не відкрито. Її інструменти креслення тоді запускають ескіз на вибраній площині чи грані або на площині, яку ви виберете далі, з уже готовим інструментом.",
"prefs.sketch_tracking_guides":"Допоміжні лінії вирівнювання за центром і середньою точкою",
"prefs.sketch_tracking_guides_note":"Наведіть курсор на центр кола або середню точку прямого відрізка, потім рухайте курсор горизонтально чи вертикально, щоб показати тимчасову пунктирну допоміжну лінію.",
"prefs.sketch_tracking_points":"Допоміжні лінії вирівнювання від кінцевих точок і кутів під час креслення",
"prefs.sketch_tracking_points_note":"Поки інструмент креслення очікує точку, наведення курсора на кінець прямої чи дуги, кут прямокутника або вільну точку показує таку саму тимчасову пунктирну допоміжну лінію, як і для центра чи середньої точки. Вимкнено: лише центри та середні точки.",
"prefs.sketching":"Ескізування",
"prefs.snap_drawing_note":"Під час малювання або перетягування точки ескізу.",
"prefs.source":"Джерело",
@@ -2054,6 +2353,24 @@
"prefs.status_error":"Помилка",
"prefs.status_selected":"Вибрано",
"prefs.status_warning":"Попередження",
"prefs.structure.appearance":"Вигляд",
"prefs.structure.appearance_note":"Кольори, текст і спеціальні можливості.",
"prefs.structure.in_profile":"У профілі",
"prefs.structure.layout":"Компонування",
"prefs.structure.layout_note":"Де розташовані частини вікна.",
"prefs.structure.look":"Оформлення",
"prefs.structure.measure_pointer":"Вимірювання та вказівник",
"prefs.structure.mouse3d":"3D-миша",
"prefs.structure.mouse3d_note":"SpaceMouse і SpaceNavigator.",
"prefs.structure.navigation_note":"Миша й трекпад. У 3D-миші є власна сторінка.",
"prefs.structure.profile":"Профіль",
"prefs.structure.profile_edited":"Змінено після збереження",
"prefs.structure.profile_hover":"Збережено в профілях налаштувань",
"prefs.theme_option_tab_colours_help":"Використовувати кольори панелей і вікна перегляду цієї теми для кожної вкладки стрічки.",
"prefs.theme_option_tab_fade_ms":"Перехід між вкладками",
"prefs.theme_option_tab_fade_ms_help":"Плавно змінювати кольори панелей і вікна перегляду під час перемикання вкладок. Нуль перемикає миттєво.",
"prefs.theme_options_badge":"Параметри",
"prefs.theme_options_more":"Ще · {count}",
"prefs.theme_options_reset":"Скинути",
"prefs.theme_options_unavailable":"Недоступно на цьому пристрої",
"prefs.theme_paste":"Вставити тему",
"prefs.theme_paste_none":"У буфері обміну немає теми SolidCraft",
"prefs.timeline_half_hour":"−30 хв",
@@ -2086,6 +2413,8 @@
"prefs.under_cursor":"Під курсором",
"prefs.units_precision":"Одиниці й точність",
"prefs.updates":"Оновлення",
"prefs.value_boxes_in_view":"Показувати значення біля їхніх маркерів на виді",
"prefs.value_boxes_in_view_tip":"Значення команди (Відстань, Радіус…) у полі біля її маркера, поверх моделі. Вимкнено: ви вводите його у вікні команди, яке після вибору отримує клавіатуру, і ніщо не закриває модель.",
"prefs.view":"Поведінка виду",
"prefs.view_confirm_corner":"OK і Скасувати в куті виду",
"prefs.view_confirm_corner_note":"Поки відкрито діалог або ескіз, галочка й хрестик у правому верхньому куті виду роблять те саме, що OK і Скасувати в діалозі, або завершують і скасовують ескіз. Навігатор виду зсувається нижче.",
"prefs.viewport_section_status":"Показувати стан перерізу у вікні перегляду",
"prefs.viewport_section_status_help":"Показувати налаштування перерізу у вікні перегляду. Escape і активна кнопка стрічки вимикають його. Вимкніть, щоб зберегти попередні елементи керування перерізом.",
"prefs.viewport_status_details_help":"Редагуйте налаштування активного аналізу та перерізу в стандартних картках подробиць. Вимкніть, щоб повернути легенди аналізу лише для читання та діалог «Переріз».",
"prefs.viewport_status_summary":"Згортати елементи рядка стану",
"prefs.viewport_status_summary_help":"Згортати три й більше елементів рядка стану в один зведений значок. Вимкніть, щоб залишити всі елементи в повному рядку.",
"prefs.wheel":"Колесо",
"prefs.wheel_trackpad":"Колесо й трекпад",
"prefs.workspace":"Робоча область",
@@ -2975,7 +3308,9 @@
"render.output_ready":"Готово до рендерингу",
"render.output_run_check":"Запустити перевірку",
"render.output_size_limit":"{method}: до {dimension} px на сторону та {pixels} пікселів. Найбільший придатний розмір: {width} × {height}.",
"render.output_size_method_profile":"Щоб візуалізувати {width} × {height}, виберіть {method} із профілем ресурсів CPU {profile} або менший розмір.",
"render.size_presets_pending":"З'явиться разом із редактором виведення",
"render.size_preview":"Попередній перегляд",
@@ -3475,6 +3811,24 @@
"sheet.flange_type_contour":"Контур",
"sheet.flange_type_edge":"Ребро",
"sheet.no_body":"немає листового тіла: створіть його через Фланець > Основа або перетворіть пластину на листовий метал командою «Перетворити на листовий метал» (виберіть її велику плоску грань)",
"sheet.personal_rules.delete_prompt":"Видалити це особисте правило? Правила, що вже є в проєктах, не зміняться.",
"sheet.personal_rules.full":"Особиста бібліотека вже містить 64 правила.",
"sheet.personal_rules.invalid_name":"Введіть коротку назву без розривів рядка та керівних символів.",
"sheet.personal_rules.invalid_values":"Заповніть значення правила: кожне має обчислюватися в цьому проєкті, з додатною товщиною та коефіцієнтом K від 0 до 1.",
"sheet.personal_rules.missing":"Вибране особисте правило більше недоступне.",
"sheet.personal_rules.name":"Назва правила",
"sheet.personal_rules.name_exists":"Особисте правило з такою назвою вже існує. Використайте іншу назву.",
"ui.3d_mouse_sketch_orbit_tip":"3D-миша також повертає вид, поки ескіз відкрито й ви дивитеся на нього прямо, так само, як і звичайна миша. Вимкнено: вона панорамує та масштабує ескіз, доки ви не нахилите вид.",
"ui.3d_mouse_skip":"Мій пристрій так не вміє",
"ui.3d_mouse_skip_tip":"Пропускає цей рух в обидва боки; калібрування його не враховує.",
"ui.3d_mouse_speed":"Швидкість 3D-миші",
@@ -3719,6 +4074,7 @@
"ui.agent_chat_auth_terminal":"Виконайте це в терміналі, а потім знову натисніть «Під'єднатися»:",
"ui.agent_chat_auth_title":"Вхід до агента",
"ui.agent_chat_cancel":"Скасувати",
"ui.agent_chat_cannot_start":"Встановлено, але не запускається: {error}",
"ui.agent_chat_changes":"Зміни: {n}, один крок скасування",
"ui.agent_chat_changes_n":"Змін: {n}",
"ui.agent_chat_changes_of":"{n}/{limit} змін",
@@ -3811,9 +4167,12 @@
"ui.agent_chat_queued_stopped":"У черзі (зупинено, не надіслано)",
"ui.agent_chat_refresh":"Оновити",
"ui.agent_chat_refused":"Не дозволено для агента: {reason}",
"ui.agent_chat_reinstall":"{agent} встановлено ({program}), але він не запустився, коли SolidCraft його перевіряв: {error}\nЙого встановлення могло бути неповним або зробленим для іншого типу комп'ютера. Встановіть його знову командою `{install}`, перевірте в терміналі, що він виводить свою версію, а потім натисніть «Оновити».",
"ui.agent_chat_remove":"Прибрати з черги",
"ui.agent_chat_remove_file":"Прибрати з цього повідомлення",
"ui.agent_chat_remove_imported":"Прибрати з цього повідомлення; деталь залишається в проєкті (скасування її прибирає)",
"ui.agent_chat_reply_cut_off":"Відповідь досягла обмеження довжини, не закінчившись, тож вона може бути неповною. Попросіть агента продовжити або дати коротшу відповідь.",
"ui.agent_chat_reply_declined":"Модель відмовилася відповідати на це повідомлення.",
"ui.agent_chat_retry":"Повторити",
"ui.agent_chat_right":"Праворуч",
"ui.agent_chat_save":"Зберегти",
@@ -3872,12 +4231,17 @@
"ui.ai_copy_suffix":"копія",
"ui.ai_custom_url":"Власна URL-адреса",
"ui.ai_default":"Типовий",
"ui.ai_edit":"Редагувати",
"ui.ai_edit_agent_title":"Редагувати агента",
"ui.ai_edit_gone":"Цього агента видалено, тож зберігати нічого.",
"ui.ai_edit_tip":"Змініть назву, команду або кінцеву точку цього агента. Збережений ключ залишається прихованим.",
"ui.ai_http_busy":"кінцева точка зайнята або перевищила ліміт; спробуйте пізніше",
"ui.ai_http_key":"кінцева точка відхилила ключ: перевірте його в Налаштування > ШІ",
"ui.ai_http_not_found":"немає такої кінцевої точки чи моделі: перевірте базову URL-адресу й назву моделі",
"ui.ai_http_too_large":"розмова завелика для цієї кінцевої точки; почніть новий чат",
"ui.ai_key":"Ключ API",
"ui.ai_key_hint":"необов'язково; зберігається в системному сховищі ключів",
"ui.ai_key_keep_hint":"залиште порожнім, щоб зберегти наявний ключ",
"ui.ai_key_needs_https":"Ключ надсилається лише через HTTPS або на цей комп'ютер.",
"ui.ai_key_note":"Зберігається в системному сховищі ключів, ніколи в налаштуваннях SolidCraft. Залиште порожнім для локального сервера.",
"ui.ai_reasoning_effort_field_hint":"порожньо = типове значення постачальника",
"ui.ai_reasoning_effort_hint":"Необов'язково. Надсилається на кінцеву точку як `reasoning_effort`; допустимі значення залежать від постачальника (наприклад, `low`, `high` або `max`). Значення, яке ви тут задали, SolidCraft ніколи не замінює. Залиште поле порожнім, щоб нічого не надсилати й зберегти типове значення постачальника.",
"ui.ai_remove":"Видалити",
"ui.ai_request_timed_out":"Модель відповідала довше за {seconds} с. Тайм-аут запиту для цієї кінцевої точки можна збільшити в Налаштування › Асистент.",
"ui.ai_request_timeout":"Тайм-аут запиту",
"ui.ai_request_timeout_hint":"Скільки може тривати один запит до моделі через цю кінцеву точку: від 30 с до години. Збільште для повільної локальної моделі.",
"ui.ai_reset":"Скинути",
"ui.ai_save":"Зберегти",
"ui.ai_settings":"Налаштування ШІ…",
"ui.ai_show_features":"Показувати функції ШІ",
"ui.ai_show_features_note":"Чат з агентом: панель, де агент для програмування, яким ви вже користуєтеся, або обрана вами модельна кінцева точка працює з відкритим проєктом. Вимкнено: немає кнопки ШІ, комбінації клавіш, пункту меню чи панелі, і нічого не шукається та не запускається.",
@@ -4042,10 +4410,15 @@
"ui.construction.reference_hint":"Допоміжна пряма: виберіть пряму, потім точку; клацніть правою кнопкою, щоб змінити опорний об'єкт",
"ui.details_zebra_caption":"Відбиті смуги показують, наскільки гладко сполучаються грані.",
"ui.diameter":"Діаметр",
"ui.dimension":"Розмір",
"ui.direct_interaction":"Пряма взаємодія",
@@ -4126,6 +4534,7 @@
"ui.edit_in_place_saved_elsewhere":"Деталь збережено в інший файл; збірка досі пов'язана з {name}",
"ui.edit_in_place_wait":"Зачекайте, поки завершиться те, що виконується в проєкті",
"ui.edit_section_analysis":"Редагувати аналіз перерізу",
"ui.edit_sketch_empty":"Немає ескізів для редагування",
"ui.ellipse":"Еліпс",
"ui.emboss_wrap_note":"Ортогональні профілі з ліній, дотичні до одного підтримуваного циліндра, обгортаються автоматично. Виберіть стінку, щоб задати ціль.",
"ui.end_radius":"Кінцевий радіус",
@@ -4136,12 +4545,15 @@
"ui.equation_explicit":"Явна",
"ui.equation_form":"Форма",
"ui.equation_note":"Змінна — звичайне число: sin(t) сприймає радіани. Результат без одиниць виміру береться в одиницях проєкту.",
"ui.equation_note_range":"Змінна — довжина, як і її діапазон: поєднуйте її з параметрами довжини, а для sin() діліть її на довжину. Результат без одиниць виміру береться в одиницях проєкту.",
"ui.equation_parametric":"Параметрична",
"ui.equation_variable_unit":"Змінна має одиниці виміру діапазону",
"ui.equation_x_of_t":"X(t)",
"ui.equation_y_of_t":"Y(t)",
"ui.equation_y_of_x":"Y(x)",
"ui.equivalent_radius":"Еквівалентний радіус",
"ui.expand":"Розгорнути",
"ui.explode_needs_two_components":"«Рознесений вид» розсовує компоненти, тож у проєкті має бути два чи більше з них («Новий компонент», «Вставити проєкт» або «Створити компоненти з тіл»)",
"ui.exportDxf":"Експорт DXF…",
"ui.export_ellipsis_keymap":"Експорт…",
"ui.export_keymap_tip":"Клавіші, обрані в полі S і панель інструментів як файл",
@@ -4302,6 +4714,7 @@
"ui.insert_design.saved_file":"{name} має незбережені зміни, тому вставлено його збережений файл. Збережіть його, потім оновіть зв'язки, щоб перенести зміни.",
"ui.insert_design.unsaved":"Незбережені зміни",
"ui.inspect":"Перевірити",
"ui.instances":"Екземпляри",
"ui.intersect":"Перетин",
"ui.isolate":"Ізолювати",
"ui.join":"З'єднати",
@@ -4310,12 +4723,14 @@
"ui.joints":"З'єднання",
"ui.keyboard_shortcuts":"Комбінації клавіш",
"ui.language":"Мова",
"ui.lasso_select":"Ласо (перетягніть довільний контур: виділяє все, що повністю всередині)",
"ui.layout_compact":"Компактне",
"ui.layout_floating":"Плаваюче",
"ui.length":"Довжина",
"ui.length_decimals":"Знаки після коми для довжин",
"ui.light":"Світла",
"ui.line":"Пряма",
"ui.line_arc_hint":"Дотична дуга: клацніть у кінці дуги. Знову затримайтеся на останній точці, щоб повернутися до прямих; клацніть правою кнопкою або натисніть Esc, щоб завершити",
"ui.link_copies":"Пов'язати однакові копії",
"ui.link_copies_keep":"Залишити",
"ui.link_copies_link":"Пов'язати",
@@ -4404,6 +4819,7 @@
"ui.part_size_shared":"Перебудовує деталь, замінюючи всі додані елементи. Усі входження цього компонента оновлюються.",
"ui.paste":"Вставити",
"ui.path":"Траєкторія",
"ui.pattern_object_type_tip":"Тіла: суцільні форми, які вибирають на виді або в браузері; кожне копіюється цілком.\nОперації: кроки Історії, як-от видавлювання чи отвір, які вибирають в Історії або на грані, створеній ними; крок повторюється.\nЕскіз не є ні тим, ні іншим: повторіть його криві власним інструментом «Масив» чи «Дзеркало» в ескізі або спершу видавіть його.",
"ui.pattern_on_path":"Масив на траєкторії",
"ui.perforate_margin_default":"від діаметра",
"ui.perforate_pitch":"Крок",
@@ -4449,9 +4865,9 @@
"ui.polygon":"Багатокутник",
"ui.preferences":"Налаштування",
"ui.press_a_key":"натисніть клавішу…",
"ui.print_face_body_not_sent":"Тіло цієї грані не надсилається: спершу додайте його до Тіла",
"ui.print_face_cleared":"{body}: грань друку скинуто",
"ui.print_face_input":"Грань друку",
"ui.print_face_one_body":"Грань друку належить одному тілу: надішліть це тіло окремо, щоб змінити її",
"ui.print_face_pick":"Виберіть плоску грань твердого тіла, щоб зробити її гранню друку",
"ui.print_face_set":"{body}: грань друку задано; «Надіслати в слайсер» кладе тіло на неї",
"ui.profile":"Профіль",
@@ -4469,6 +4885,7 @@
"ui.properties.inertia_y":"Iyx, Iyy, Iyz",
"ui.properties.inertia_z":"Izx, Izy, Izz",
"ui.properties.measuring":"Вимірювання…",
"ui.properties.measuring_bodies":"Вимірювання… {done} з {total} тіл",
"ui.properties.measuring_failed":"Вимірювання перервано до завершення.",
"ui.select_components_by_face":"Вибрати компоненти (грань вибирає свій компонент)",
"ui.selection":"Виділення",
"ui.selection_modifiers":"Модифікатори вибору",
"ui.selection_shift_add_only":"Shift+клацання додає без вилучення",
@@ -4677,12 +5095,15 @@
"ui.view_angles":"Кути виду",
"ui.view_angles_convention":"Градуси навколо вертикальної осі. Рискання 0° — вид спереду, 90° — зліва, −90° — справа, 180° — ззаду; тангаж 90° — вид зверху; додатний крен повертає модель за годинниковою стрілкою.",
"ui.view_angles_help":"Показує тангаж, рискання та крен виду в градусах, а також його проєкцію під елементом орієнтації. Клацніть показник, щоб ввести точні кути.",
"ui.viewport_status_summary_heading":"На цьому виді",
"ui.viewport_status_summary_label":"{name} і ще елементів: {count}",
"ui.viewport_status_summary_more":"+{count}",
"ui.viewport_theme_follow":"За темою",
"ui.visual_shaded_hidden_edges":"Затінений із прихованими ребрами",
"ui.visual_shaded_with_edges":"Затінений із ребрами",
@@ -4736,7 +5161,7 @@
"update.check_unavailable":"Перевірка оновлень недоступна для цього встановлення.",
"update.checking":"Перевірка…",
"update.copy":"Копіювати",
"update.dmg_opened":"Образ диска відкрито й перевірено: перетягніть SolidCraft до Applications, замінивши стару копію, а потім перезапустіть SolidCraft.",
"update.dmg_opened":"Образ диска відкрито й перевірено: завершіть SolidCraft, перетягніть новий SolidCraft до Applications, замінивши стару копію, а потім знову відкрийте SolidCraft.",
"update.download":"Завантажити",
"update.download_open":"Завантажити й відкрити",
"update.downloading":"Завантаження та перевірка… {done} з {total} МБ",
/// The image file, base64. Shared rather than owned: every edit clones the document (the undo
/// history keeps the old one), and an image of up to 16 MiB copied into each of the 200 undo
/// states would hold gigabytes. Serialized as the same JSON string as before.
pubdata: std::sync::Arc<str>,
/// Pixel size of the image.
pubpixels: [u32;2],
pubplane: PlaneRef,
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
bherbruck
