The packaging action can't read a hyphenated version from the tarball's name, so the job gives it a name without the hyphen and renames the package back. A hyphenated version no longer fails the build if its Arch job fails; a plain version still does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Bumps the version to 0.40.0-rc.1 and folds the pending format changes into format 49. The default-layout header test now expects the room the version really takes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
06-threads/018-external-m10-both-hands makes 606 edges and 404 vertices (486 and 324 before),
with the same 204 faces, area and volume (to 1e-11), in two runs on the box; every other ladder
case is as the golden records it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Five tests fail at the new pin and are listed with their causes: the variable round along a box
edge (status 1001, twice), the shell of a fully rounded box past its rounds' radius
(SM_ERR_INVALID_INPUT), the chamfer that would grow the part (no face instead of the
too-large refusal) and the box-edge round's wire record. The tabbed plate's outer loop with a
partial selection passes and leaves the list; issue2422's vertical edge now fails as a smooth
edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright build (9524.3437, 10 faces,
solidcore#2431); 5158-fillet-round-just-past-a-10mm-face, the curvature pipe on a plate's
order-2 section, the concave-arc and front-top rounds (r5, r7 and default) and the peg's front
and concave rounds and chamfers build and pass their checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The rim alone was pinned to 7.958674274526857, the marched end rib's value; its closed form,
the spandrel (1 - pi/4) r^2 revolved about the disc's axis outside |x| < 4, is
7.958672911836132, which the rim's End (fillet_blend_corner) builds to 5e-8. With the corner
arc's Pappus volume the two take off 8.117808752; solidcore 8ddce9016 removes 8.117808800.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 (pinned) the r2, r2, r3 corner at (20, 0, 20) is one patch: 10 faces,
7928.743041456134 mm³, the r3 round and the patch the second fillet's. The test is pinned to
that and leaves the known-failing list. The fork's setback corner (15 faces, 7928.142563938)
waits for solidcore#2310; solidcore#2382, not merged, moves the case to 7927.724282512234.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
smlib's run() catches a solidcore panic and replaces the kernel (kept: the app does not die
natively), returning Error::Internal; the kernel turned it into KernelError::Failed and the
engine into Other, so hostile_params_never_panic and the fuzzer no longer saw kernel panics.
Now the kernel's wrapper errors go through KernelError::smlib, which keeps Internal; a body the
wrapper could not take because of a panic is Internal too. A feature whose evaluation hit it
records the result as internal (not cached: the kernel was replaced), and the command that
made it, or any command whose kernel call returns it, fails with EngineError::Internal under
its own id. Crash reports mark a panic inside a solidcore call recovered (kernel::guarded), and
the crash test's kernel mode panics inside a solidcore call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The kernel crash test's command must fail with EngineError::Internal naming
diagnostics.crash_test, as a panic in the command itself does: the panic detectors
(hostile_params_never_panic, the fuzzer) look for Internal. Today it is EngineError::Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
solidcore's algorithms recurse (subdivision, intersection, filleting) and its README asks for
8 MiB, a native main thread's stack; Rust starts other threads with 2 MiB, and only the web
build set more. kernel::KERNEL_STACK is 8 MiB and kernel::kernel_thread a thread builder with it.
The kernel's parallel map runs on a pool of its own with that stack (on a worker of a pool
already, as in map_with_local_pools, it stays on that pool as before), the one-thread mesh pools
and map_on_threads' helpers have it, and so do the engine's interference worker and the
evaluator's plan-mesh thread. A test recurses 5 MiB deep on each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
While a dump folder was set, every call serialised each input body before it ran, so the rig's
timings (taken with a folder set) measured the serialiser as much as the kernel. The callers now
hand run_on the bodies the call reads; they keep them until its result is known, and only a
failing call serialises them, into the folder as before. A test counts the serialisations: an
answered volume and union none, a failing call one per input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The check had become one-sided after the C++ kernel's removal: a case that started passing,
or a change in the count, went unnoticed. As on main, a case that now passes fails the test
until it is added to the list, one that no longer passes is a regression, and the count is 111.
At solidcore 8ddce9016 solidcore passes exactly the 111.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The workflow triggers on the root Cargo.toml and Cargo.lock, and the plan gets their diff
(--pin-diff): a changed line that names solidcore's repository (Cargo.toml's git rev, Cargo.lock's
source) selects every area and the ladder. A path filter cannot tell a pin from another
dependency's change, so the plan reads the lines; another dependency's change runs no area.
The fillet rig is not triggered: the kernel rig's fillets shard runs the same cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A solidcore bump changes only the root Cargo.toml and Cargo.lock, which neither PATHS-ALL nor
the workflow's trigger paths list, so it ran no rig. The tests want a change to the solidcore
lines of those files to run everything, another dependency's change in them to run nothing, and
the workflow to trigger on both files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A shell, offset or thicken solidcore's one construction refuses because a face's offset folds
(SolidError::ShellRefused, ShellRefusal::Fold) is Error::WallFolds with the largest wall it
names; the kernel says "the wall is thicker than a face curves, so the face's offset would
fold; the largest wall that works is 10 mm". A blend too large carries solidcore's NoRoomReason
as Error::TooLarge's RoomReason, worded in its message before the largest size that fits:
a collapsed offset (solidcore#2431) says the ball is as wide as the face it rolls on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A thicken of solidcore#2350's parabolic sheet past its apex's radius of curvature is refused
by solidcore's one construction (ShellRefused, Fold, naming 10); the wrapper passed it on as
"solidcore: ..." with no words of its own. A round at the radius of the round it rolls on
beside the 851 part's arc wall is refused as a collapsed offset (NoRoomReason::OffsetCollapses,
solidcore#2431); the message named the size but not why. Both fail until the reasons are
carried through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 three equal convex rounds at a vertex of three planes are the blend
corner's Ball (fillet_blend_corner). The wrapper set a setback on the corner after the corners
were made, so a set-back vertex was already a Ball (NByTwo) and its setback was refused
(CornerRefused): a_setback_corner_left_open_returns_its_hole (both) and setback_corner's
closed form. solidcore's AddSetBackVertex, called before the corners are made as the fork's capi
round_edges does, keeps a set-back vertex out of the Ball, and its corner is set back.
The corner a setback is set on may also be a blend corner whose event is the Setback, as the
capi takes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 a Ball corner is a BallPatch (fillet_blend_corner) and a round between
NURBS faces a ProceduralBlend (fillet_round_as_definition). The arrays' B-spline part of a face
had neither, so their export fell to the approximation and failed ("an approximated face surface
that is not a B-spline"): the rounded cube, the variable and curvature rounds and the
all-edges box in the smlib tests, and the Ball-corner and round cases of the rig.
Both are their nets, exactly. A ball patch also goes out as SURFACE_BALL_PATCH, its sphere's
centre and radius in FACE_DEFINITION_REALS, as the record's BallPatch reads it, and comes back
as solidcore's BallPatch on that net: the rounded cube's eight corners stay on their spheres
through the record and back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
solidcore main at 8ddce9016 adds cone_unbounded_parameterized_as_nurb,
ellipse_open_arc_keeps_end_angle (solidcore#2422), fillet_round_as_definition,
fillet_round_on_round_as_definition, fillet_overflow_crease_along_edge,
plane_first_torus_section_exact, keep_exact_pcurves and shell_one_construction
(solidcore#2367), and drops fillet_extended_rail_end_at_side_edge_crossing.
Every one is on. fillet_keep_features is no longer held back: solidcore#2374
fixes the round beside a boss it refused (solidcore#2370).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A block's front top edge rounded r 3 beside a boss joined on its top fails SM_ERR_INVALID_INPUT
with it on; off it builds the closed form, 6099.225530 mm³, as the C++ fork does. Found by
ui-egui's opening_a_large_design_never_stalls_the_window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
solidcore's fit is the largest size less a margin (34.99 where the L bracket's bend builds 35,
4.29 where #3435's ring builds 4.3), so the feature's search keeps naming the size, and solidcore's
is the answer only where the search finds none. The refusal keeps its words, "larger than the
faces beside its edges allow", with the edge after them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
solidcore sizes a blend it refuses as too large (the session's fit, SolidError::FilletRefused under
fillet_gn_section_generator). The smlib crate gives it as Error::TooLarge with the size, what it
sizes and a point halfway along its edge (an equal chamfer's ball radius turned back into its
distance); the kernel words it as the fillet feature's search does (largest_fit_note), and the
feature runs no search when the refusal names it. The 3x2 mixed corner whose rails cross, which
solidcore refuses (fillet_refuse_mixed_corner_crossing_rails), is not supported yet, citing
solidcore#2256.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
With it on, 11 rig cases that pass with it off are refused as breaking through the part, and
190-fillet-disc-rim-past-its-2mm-wall fails status 1001. A fix under the same flag is in progress
on solidcore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
Main took #11351 as one squashed commit (ea772a043). This merge records its history as 509
wave commits: a wave ends at every SMLib pin and holds at most 4 commits or about 800 changed
lines. Each wave lists the commits it holds; the originals stay reachable from tag
archive/merge-main-develop. Main's files are kept as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360).
- b2fd08e85 jyviko: Profiler: no smlib category left in its tests and help
- d49a7eac0 jyviko: Known-failing tests: the convex chamfer that would grow the part passes
- d55fedd56 jyviko: smlib export test: a rounded cube's corners checked on solidcore's spheres
- 017a2a607 jyviko: Known-failing tests: the fillet into an earlier round passes on solidcore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
39 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. These commits sit on several merged branches, so the wave holds their combined result.
- 1b17dd7f5 brett19: Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
- 8f2c11da2 brett19: Drawings hidden lines: read develop's B-rep records
- c30ca0216 brett19: Hidden-line fixtures: build develop's records from the fixtures' data
- 5dd2509ae brett19: Hidden lines: tests of the bounded edges, face charts and placed revolutions
- 1642df0ea brett19: drawing-hlr doc: what is drawn and refused on develop's records
- ddcb80c8e brett19: hlr tests: a placed revolution is refused when its placement is not rigid
- e4977721f brett19: Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
- b3ef6ae52 brett19: Hidden lines: kernel bodies through the production prepare against closed forms
- 4cd2ae062 brett19: Tests from main: the world state is a Result here
- 51d7ad09e brett19: A blend's pick measures close edges on their curves, not their polylines
- 11a89713c brett19: Merge fixes from the first SMLib test pass
- 48fcb7aac brett19: Merge fixes from the ui test pass and the gates
- abd739855 brett19: A silhouette takes its facing from the surface's normals
- 85114c5a2 brett19: Clippy and rustfmt on the merged tree
- 55a46569f brett19: Stepwise open checks every feature under the session's mode
- 4627402e4 brett19: Clippy without SMLib: the planar-sheet edge reader is built only with it
- 5fbece0ac brett19: STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
- eb78d20b0 brett19: Lid ring sketch test: find the ring under the pick, not by main's kernel's name
- 3048d8c49 brett19: Viewport culling test: each box's triangles from its mesh, not 12
- dc88b80e2 brett19: Timeline chip test: a fillet that really reduces
- 876203621 brett19: Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
- 900635710 brett19: rustfmt on the merged tree
- b7e83cd7c brett19: Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
- 63bde053a jyviko: Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
- 967a1caa6 brett19: Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
- 82c821d2a brett19: After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
- 5862ee223 brett19: After the merge: main's new tests on the SMLib kernel
- be78372b2 brett19: Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
- 312d14500 jyviko: After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- 6f7e51acb jyviko: After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
- 8f0c79b20 jyviko: After the merge: main's two new tests take world_state's Result, as the rest of their files do
- 5f4d70061 jyviko: After the merge with main: its new code on develop's exact bounds, types and thread fields
- 2b2ab6627 jyviko: Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
- e6a4b0a9a jyviko: Kernel rig: main's six new sketch-only commands are exempt from a kernel case
- 5acbd2e71 jyviko: Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- d2b202307 jyviko: Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
- 21db090ba jyviko: Kernel rig: construct.plane.axis_point gets construction cases
- c1f45cae2 jyviko: Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- 084695416 jyviko: Kernel rig: export and print face cases in the import area
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e01031bc jyviko: smlib export tests: rustfmt's line for the rounded cube's edge midpoints
- c29190ec3 jyviko: Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
- 62d372cc1 jyviko: Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
- 2bf58241f jyviko: Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- b8fa0d8aa brett19: Known failing on solidcore after the f916a8d sync; blend_fit in the entry-point guard
- 5a93e6c4d brett19: Make the C++ SMLib kernel opt-in at build time (feature smlib, off by default)
- 29a148abd brett19: CI: build without the C++ SMLib kernel except where a job needs it
- e30cfd2ac brett19: Tests and the rig for a default build without the C++ kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3902c954 jyviko: SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 4c1eed960 brett19: Tabbed plate: the rim and one corner arc round together (solidcore#2223)
- dd00ff989 brett19: Native wire fixture: a box edge round's cylinder keeps its own frame
- 584075662 brett19: Known failing on solidcore after the smlib merge: SMLib 5e8c9c1's new blend (solidcore#2273) and main's new tests
- 8af1fdf5a brett19: Known failing on SMLib (the .smlib list): as the smlib branch lists them at f916a8d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 597b23ba8 jyviko: Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
- 820b7b667 jyviko: Agents: AGENTS.md loses a stray merge-conflict marker line at its end
- 92734d7eb jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
- 653c16e6f jyviko: Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ad3ee0585 jyviko: Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
- 608d07eca jyviko: xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5136898b9 jyviko: Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
- e6db7be0a jyviko: Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
- 5d168a5e2 jyviko: Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
- 99953687c jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aed047703 jyviko: Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
- 17de3569f jyviko: SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- f9fc68167 brett19: solidcore: a curvature fillet is the equal-area Gⁿ section; mixed wedges refused
- d52cf6b14 brett19: Known failures at solidcore adf26ddbc: curvature and variable rounds built
- 5ec92b0ba brett19: Move the solidcore pin to 2dbd88b6e
- 92618ac4c brett19: Turn on solidcore's new fixes at 2dbd88b6e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- e30e983c3 brett19: Move the solidcore pin to 4d3ce6264
- c8351719e brett19: Move the solidcore pin to adf26ddbc
- d33b6eb30 brett19: Turn on fillet_gn_section_generator
- 3b4adeb73 brett19: solidcore: a variable round is built again, as the union of its balls
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a4d9c31c jyviko: Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
- 303111e4e jyviko: Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
- c5332faf4 jyviko: Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
- 970446dec jyviko: Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 72109054c jyviko: Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
- f87305648 jyviko: Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
- 75efb8f0c jyviko: Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
- 68c3ccb75 jyviko: Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5cd5f303 jyviko: Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
- ea49dff48 jyviko: Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
- 38385ab5d jyviko: Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
- 459937e52 jyviko: Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 9f64cce54 brett19: solidcore: a variable-radius fillet is refused until solidcore builds the union of its balls
- bd4dc081d brett19: Known failures on solidcore after the merge: the refused curvature and variable rounds, develop's new cases
- c6fa7e563 brett19: Move the solidcore pin to c9a06dc7c
- de9a654db brett19: Turn on solidcore's new fixes at c9a06dc7c
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce8b01fa3 jyviko: Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
- 78ed75162 jyviko: Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
- ee3ed66a4 jyviko: Kernel rig: two chains that now build graded by their exact volumes
- f2ff6f0d4 jyviko: Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf51e62f7 jyviko: Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
- cde8be4a1 jyviko: Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
- 155f1f470 jyviko: Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
- 21f00a917 jyviko: Kernel rig: every fillet and chamfer case rounds its tangent chain
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e8caa1e91 jyviko: Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
- 60393a718 jyviko: Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
- 6ba069d06 jyviko: Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
- e24eb7789 jyviko: SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 02de15f90 brett19: Move the solidcore pin to 9fb13f145
- 09b646005 brett19: Turn on solidcore's new fixes at 9fb13f145
- c494a18f9 brett19: Rig: the reimported peg's rounds fail as the peg's do
- e9ac0e606 brett19: solidcore: a curvature fillet is refused until solidcore has the equal-area Gⁿ section
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- a1b4119c3 brett19: Turn on geometric_g2_continuity: 2992's slowdown is gone
- f2ce343a0 brett19: Known failures after the new fixes: four tests and a rig case pass
- b57c24f7f brett19: Known-failing tests: the tabbed plate cites solidcore#2223
- 0aff35705 brett19: Merge fix: solidcore reads planar sheets without SMLib, so their edge reader is always built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- fb851d9c2 brett19: Known-failing tests: main's four tests that fail on solidcore as on C++
- 6de10a7fb brett19: Model cache test: say why it reaches the C++ kernel
- 84bca5969 brett19: Move the solidcore pin to c931c9641
- e1b76bdfc brett19: Turn on solidcore's new fixes at c931c9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 15c5cd5d5 brett19: Known-failing tests: cite the solidcore issues now filed
- 462738b6a brett19: Known failing after the smlib merge: the r5 test-peg corner on solidcore, main's C++ test lines
- 4a98a1f8a brett19: Model cache: a saved model is its kernel's
- 9c2388ef8 brett19: Geometry kernel strings in Vietnamese, now a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01e2e939e jyviko: Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
- 7bba3092c jyviko: Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
- 0b1cc8a8c jyviko: Kernel tests: a spline radius whose balls fold over one another at its peak is refused
- 1745e5c38 jyviko: Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- afb55d806 brett19: One kernel flag: solidcore, the default, or smlib; routed is gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 3908128a8 brett19: Known-failing tests: refreshed from the default run at solidcore de85a3e00
- cd94f78f3 brett19: Rig: --route is gone; a run has one kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cf5e0e3c1 jyviko: Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7577e032f jyviko: Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 922ee28f3 jyviko: Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
- 19455396b jyviko: Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
- 4df3adc5a jyviko: Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
- 539d12648 jyviko: Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aa41c0b5d jyviko: Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
- 05f5e8601 jyviko: Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
- 9d4f78001 jyviko: SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 75229f2b9 brett19: Offset tests: a sphere moved to its centre leaves nothing again (solidcore#2092 fixed by #2096)
- 6221b7f4b brett19: Rig: solidcore known-failing lists at pin de85a3e00
- b04e363e7 brett19: Rig: #316's renamed shell cases pass on solidcore, off its known-failing list
- c786db6bf brett19: A blend's pick measures close edges on their curves, not their polylines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 197cd4f43 brett19: Booleans: the copies no longer take an index
- 0f843c295 brett19: Pin solidcore at main de85a3e00 (#2080, #2081, #2086, #2095, #2096, #2097, #2102, #2103)
- 0b48548af brett19: Turn on solidcore's new fixes and take the rational-span flag off HELD_BACK
- d0c95f0dc brett19: Chamfer: second offsets through SetFilletParameters (solidcore#2095)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 1bf9c8665 brett19: HELD_BACK: geometric_g2_continuity is a fourfold slowdown on 2992, not a hang
- 126a281bb brett19: Pin solidcore at main c093bc5a3 (#2054, #2060, #2061, #2065, #2066, #2068, #2069, #2072, #2076)
- 5d59d42d8 brett19: Turn on gap_samples_non_bspline_v_stride, gap_array_append_updates_longest, imprint_skips_collapsed_definition
- 1c90e60aa brett19: Working copies by solidcore's brep_copy, not our own key domains (#2047 fixed by #2055)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 32b26888c brett19: Turn on offset_keep_cavity_regions and offset_four_face_vertex_split
- 38849d7b0 brett19: Hold geometric_g2_continuity: with the rational-span flag off, 2992 and 3368 don't end
- 5d7dca1a9 brett19: Offset tests: both kernels refuse a top moved -9; the sphere to its centre waits on solidcore
- da4db59a3 brett19: HELD_BACK: geometric_g2_continuity's reason is 2992 alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 19014f38a jyviko: Kernel rig: constant rounds of the exact classes, and a tee's round
- 73416a9bf jyviko: Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
- 60923d8cc jyviko: SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 2b1a63d3f brett19: Pin solidcore at main 2898e1197 (#2053)
- 9337aff4c brett19: Every solidcore fix on unless it appears broken (brett19's rule)
- 2cd566aae brett19: Hold bspline_trim_keeps_rational_end_spans: it fails 3078's check
- 9df34988c brett19: Pin solidcore at main bb6b65706 (#2049, #2051, #2055)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- eff6416d4 brett19: Pin solidcore at main f75e9d2e8 (#2023, #2024, #2034-#2040, #2043-#2045)
- 15e3a61da brett19: Pin 8: decide the new solidcore flags against the fork at 26cc451
- 6a0166853 brett19: A round mitred to one that overflows goes first with it (fork 9ba2b12); flags() and warnings
- d4eb66f25 brett19: Turn on offset_splits_corner_vertices (fork 2e1bb8c's behaviour)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 8ad306e69 brett19: boolean2d through boolean_2d, typed edge-vanishes, typed put-back refusal
- b6285e525 brett19: Overflowing rounds go first again (solidcore#1980)
- 2647b12e5 brett19: Hold back fillet_refuse_crossing_rails: not in the fork
- 0b627d637 brett19: Restore all_solid's loop: an unused index slipped in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a3165f62d jyviko: Rig: fillet corners graded curvature-continuous, the default to be
- be0b1b39b jyviko: Rig: the test-peg's front chamfer builds
- 6cd4003ad jyviko: Rig: the curvature-continuous corner cases pick the curvature fillet
- 4401ffb1f jyviko: Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 83487c4d9 brett19: Pin solidcore at main 9f2c980b3 (#2004, #2005, #2006, #2008)
- aca0b57ee brett19: Turn on plane_recognition_origin_after_axes
- 5c0279153 brett19: Pin solidcore at main c369f8801 (#1977, #1996, #2000, #2016, #2017, #2018, #2027 and more)
- 14b1d1956 brett19: Pin 7: decide the new solidcore flags against the fork
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- ec3a21778 Brett Lawson: smlib: a blend on solidcore has a history, as on the C++ kernel
- 03470c3df brett19: Pin solidcore at main 9dde25e97 (#1988, #1997, #1985, #1940, #1974, #1975, #1976)
- f01b87757 brett19: Audit the held flags against the fork's source; tabbed plate and mitred rounds parity
- 9b73dfe74 brett19: Offsets go through solidcore's simple calls; ignored tests cite solidcore issues
Co-authored-by: Brett Lawson <brett@Ubuntu-resolute-latest-amd64-base.zst>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 88e00486b jyviko: STEP import: a face bounded by a slit alone is the whole of its closed surface
- 3c16884f7 jyviko: Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57edcf61a jyviko: Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
- a250062c2 jyviko: Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
- b0d1ba345 jyviko: Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
- 77f127c61 jyviko: STEP import: a face bounded by seams alone runs its loop the other way, never turns over
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 889a2f866 jyviko: Kernel rig: the cut mirrored loft graded on the box its sections pin
- 37a4c5647 jyviko: Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
- 6c2a2f395 jyviko: Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
- cd56cd3ad jyviko: Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6847c97c jyviko: Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
- bfdb79418 jyviko: Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
- 130f2adaf jyviko: Kernel rig: the two G0 window patches graded on the box the part they close keeps
- 8e0f6403c jyviko: Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49c7b982e jyviko: Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
- 0bcc24ccd jyviko: Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
- 27b7e202a jyviko: Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
- 9b4162a33 jyviko: Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f2aba03f8 jyviko: Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
- 764719c53 jyviko: Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
- 4b512f69e jyviko: Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
- 63dd6ae6f jyviko: Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a53f1640e jyviko: Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
- be8e728cd jyviko: Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
- edb558bd1 jyviko: Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
- fd9d159f4 jyviko: Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c740e4de1 jyviko: Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
- ba75de350 jyviko: Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
- bdb321cdb jyviko: Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
- 1893a5016 jyviko: Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d54d3195f jyviko: Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
- c0c961326 jyviko: Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
- d77aac416 jyviko: Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
- e30459e52 jyviko: Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7fdbd5ab6 jyviko: Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
- 18c8add3f jyviko: Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
- 5fb3cfa8a jyviko: Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
- 34e404d38 jyviko: Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3c8c36ec jyviko: Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
- 9aa2651b1 jyviko: Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
- 391fc51b4 jyviko: Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
- 166d574cc jyviko: Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e348ae2a jyviko: Tests: rustfmt the board fixture example and the coplanar asserts
- 033d1a122 jyviko: Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
- 780a0652d jyviko: Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43551498d jyviko: STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
- 6704d3094 jyviko: Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
- 94acc0c43 jyviko: Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
- 88c7cb6a8 jyviko: Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f81c4b157 jyviko: Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
- 9c0d6bd1f jyviko: Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
- 648413556 jyviko: Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
- 35805f899 jyviko: Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 16bef1097 jyviko: Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
- 699ddb6b3 jyviko: SMLib history test: every operand's order is the identity on its record's faces and edges
- ec421252d jyviko: Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
- f87f22874 jyviko: Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94e67d4ca jyviko: Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
- 4c7d4f5c0 jyviko: Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
- 0d94d5f77 jyviko: Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
- c44cbe9ac jyviko: Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d7bbf09e0 jyviko: Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
- 0e51ffbff jyviko: Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
- e03c72a3e jyviko: Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
- 321e56724 jyviko: Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fe9df533 jyviko: Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
- 8ec40d25e jyviko: Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
- 697ea2ca8 jyviko: Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
- e60cde8dc jyviko: Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 25692b119 jyviko: Kernel rig: the ring cut frame and the up-down join shell
- 18f08bf83 jyviko: Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
- 78b765e83 jyviko: Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
- f7d4e5344 jyviko: SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 469a3b2f9 jyviko: Naming: a blend's seams split its edge's name at the | between its two faces
- 1d818a2d1 jyviko: Fillet rig: five refused blends build, off the known-failing list
- 8550ac7e4 jyviko: Kernel rig: the trough and the pocket whose floors fall to a drain build
- 5f826a1a6 jyviko: Kernel rig: the plate with a hole through its arc side shells open at its far end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b16e8a542 jyviko: Sketch: a control spline can carry its own knots and weights
- e6abea809 jyviko: Sketch projection: a free-form edge comes in as the one exact spline it is
- f61f25c7f jyviko: Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
- 09bc14dbd jyviko: Naming: test that a round of a round's end has no seam with that round's faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dd8867414 jyviko: kernel: Extend grows a surface of several faces face by face
- 48a757827 jyviko: kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
- 3421a8ef0 jyviko: Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
- 20d5d8b13 jyviko: kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5bb43bdb1 jyviko: CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
- d23c37027 jyviko: Tests: the known-failing list takes develop's 10 failing tests
- e18fb40d8 jyviko: Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
- 9b58a5170 jyviko: Sweep path: a curve of several pieces is turned round whole
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c19500fce jyviko: Fillet: the radius-too-large choice in plain nouns
- b75d17667 jyviko: kernel: a round that would cut through its wall into a hollow is refused
- 795394417 jyviko: Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
- a26d3ee41 jyviko: xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 62fe29dbd jyviko: Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
- 571d711c8 jyviko: kernel: the re-blend's removed picks formatted as rustfmt lays them out
- 2fab94991 jyviko: kernel: blend_smlib laid out by the 2024 edition's rustfmt
- 38fd4a4f6 jyviko: Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- b0568524b Brett Lawson: smlib: solidcore's four new fork-carried opt-ins are on; the trimmed face tight box waits
- a2d5971be Brett Lawson: smlib: the quarter-cylinder sheet offset and the half-disc extrude match the C++ kernel on solidcore
- 509209838 Brett Lawson: solidcore: move the pin to afcee131a (main, with solidcore#1594, #1674, #1595)
- c9fcf82a5 Brett Lawson: smlib: solidcore's four new fork-carried opt-ins are on; the fillet trim status waits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cdff4ac7c jyviko: engine tests: probes ask for the exact point class
- 7ca072ec6 jyviko: ui, cli tests: probes ask for the exact point class
- a85d22e60 jyviko: kernel: Body::contains, the mesh test, is gone
- baf51b271 jyviko: kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 9a901d136 Brett Lawson: smlib: tag history on solidcore is one application Tag per object, with the capi's handlers
- fecd4bee3 Brett Lawson: smlib: an extruded profile's arcs on one circle sweep one wall face on solidcore
- 5f7a21157 Brett Lawson: smlib: the half-disc extrude's C++ comparison cites solidcore#1477
- f64857f95 Brett Lawson: solidcore: move the pin to 15e72dff9 (main, with solidcore#1752, #1495, #1796)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 63864b298 Brett Lawson: smlib: solidcore's five new fork-carried opt-ins are on; the trim end-span opt-in waits
- 494a08de1 Brett Lawson: smlib: history on solidcore: a face whose edge is only cut by a vertex is Kept (fork 1c7accd)
- ccfa37a9b Brett Lawson: solidcore: move the pin to bba8d8798 (main, with solidcore#1747 application attribute handlers)
- 8d47118ff Brett Lawson: smlib: solidcore's three new fork-carried opt-ins are on; the blend-curve revolve opt-in waits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 20c0c2ffc jyviko: Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
- 56d39a576 jyviko: smlib: Brep::classify_point says exactly where a point lies against a body
- 7b3e66cba jyviko: kernel: Body::classify_point decides inside, outside or on the boundary exactly
- 3b88f1acc jyviko: doc: a hole decides whether it exits at its drill point's shoulder exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- cf2a15ace Brett Lawson: smlib: solidcore's four fork-carried opt-ins are on; only the trim base v opt-in waits
- c3f5bb40b Brett Lawson: smlib: a draft on solidcore keeps the body's tags and face history
- cd25e9e8f Brett Lawson: smlib: a face section on solidcore cuts planes, cylinders, cones and spheres too (solidcore#1769)
- 9c1f8904e Brett Lawson: solidcore: move the pin to 43ed10e54 (main, with solidcore#1650, fixing #1631)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6f0bf0dea jyviko: Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
- 3772a6e97 jyviko: kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
- 9308224ef jyviko: Fillet rig: the knife edge's 0.5 chamfer builds
- 58e0d8346 jyviko: Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 04955683f jyviko: Tests: a strip's tangent and curvature run-offs are the distance long across the surface
- 4f64a035a jyviko: kernel: one smooth angle, and a round too small to change the part is refused
- c23ef9d93 jyviko: Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
- 6f7172dc8 jyviko: kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9760feed4 jyviko: Kernel: a body's record of rounds goes with its history, and can be read back
- f3cf0c4f3 jyviko: Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
- 134a34f89 jyviko: Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
- 456e5b7fa jyviko: Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8ed4663ae jyviko: Mesh convert: a reconstructed bore is one wall, so the bracket has 9 faces
- 6d8e002f8 jyviko: UI: rim and wall picking tests for a circle of arcs that is one wall
- 3e5b358af jyviko: Fillets: a later round at a corner where earlier rounds meet blends them again with it
- 5d1b18f40 jyviko: Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ae53d387 jyviko: Preferences: metric tapped holes drill only the tap maker's drill
- a71450aeb jyviko: Preferences: symmetric surface extrudes read only the total distance
- 26b42048c jyviko: Preferences: the Body check note says each option in one short line
- 2c1901371 jyviko: kernel: the record test takes the one wall a circle of arcs extrudes to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 709765fca jyviko: Model cache: a saved model records its body check mode and is adopted under it
- 393c83c2a jyviko: STEP import: a solid the kernel refuses, its faces too, is refused with the reason, never a mesh
- 6700e6ef1 jyviko: kernel: a body SMLib keeps in the record's order is mapped, whatever order its export lists
- 222211de4 jyviko: Model cache: a thinned model keeps the check mode only as the model records it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e43fe1ab0 jyviko: Kernel rig: diagnostics.validation is a setting, exempt from cases
- b24d90269 jyviko: doc, ui: a feature that lost a reference asks for it to be picked again
- d62d248b7 jyviko: doc: Untrim's face points pick faces of the body it untrims
- 1b08d4b8b jyviko: doc: a feature's face points are named on its own component's bodies first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5d80fc571 jyviko: Engine: diagnostics.validation reads and sets the mode
- 1a93a3977 jyviko: CLI: run and kernel-cases take the validation mode
- 50501fe14 jyviko: Preferences: Body check, once per feature by default
- 6a133042c jyviko: Preferences: the body check is the kernel's, not named after SMLib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 292ec65c8 jyviko: Fillet rig: the chamfer running into the openings is named for what it does
- 051a7b714 jyviko: Kernel tests: rustfmt
- 4030b795c jyviko: Kernel: a validation mode decides when sweeps, booleans and blends are checked
- 9acbcf924 jyviko: Evaluation: under each_feature a feature's kept bodies are checked once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b4af45dd0 jyviko: Kernel rig: the horn torus and the circle revolved touching its axis build
- f1199f89b jyviko: Joint drive: contact is decided on the exact bodies, not their display meshes
- 3a2fac31a jyviko: Kernel tests, fillet rig: a chamfer as wide as its rim builds
- 1878274cb jyviko: Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e46359ff0 jyviko: Kernel rig: the patch cases the fill now builds come off the known-failing lists
- 7c9e5ec69 jyviko: kernel: a seam held as two edges is one join, drawn whole in the shaded view
- 12496c2c1 jyviko: Tests: a round flange stays an exact circle through unfold, refold and DXF, with a cut near its rim
- 7fe880a7b jyviko: SMLib: pin f8fd83e (tangency-labs/smlib#66)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 5314031ba Brett Lawson: smlib: solidcore's tangent-face edge check and horn-torus revolve opt-ins are on
- 81088bf0c Brett Lawson: smlib: a sweep along a bent path is tested on solidcore (solidcore#1628 is fixed)
- a6b280467 Brett Lawson: solidcore: move the pin to 3569b5d73 (main, with solidcore#1665, #1681, #1614, #1677)
- 0bed45d82 Brett Lawson: smlib: solidcore's planar thicken side walls opt-in is on; four opt-ins wait for the fork
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5941c0d0 jyviko: geom: a general fill's crown fills out to the side its neighbours' normals face
- f7409dd59 jyviko: geom, kernel: a loop with fewer than three corners is filled by a ring of patches
- c088cf43e jyviko: geom: the patches about a centre are solved the same to the last bit on every run
- 25e275722 jyviko: Tests: a patch's continuity g3 is valid, g5 is the hostile word
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49377d318 jyviko: geom: patches about a fill's centre join G1 there, with the linear gluing function
- 55cb6b32b jyviko: geom, kernel: the patch fill's sides run from corner to corner, not edge to edge
- 62d41a0cf jyviko: Tests: the fill tests evaluate a face's (u, v) on its NURBS form
- 30b12cea8 jyviko: geom: a crowned height field rises by the whole crown at its box's middle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5732b62ec jyviko: Tapered extrude: the end check of a profile with holes takes the section a swallowed line leaves
- 738f336e1 jyviko: Raytrace: a closed box dielectric is certified from its mesh's geometry, in any tiling
- 9243b6550 jyviko: SMLib history: a split line between two pieces of one face comes from nothing
- 013978724 jyviko: geom: the patch fill's cross-boundary targets agree with its corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fb5ae6cdd jyviko: SMLib import: an extruded circle's circle comes from its widest span, not the face's range
- 17a466e6b jyviko: Ruled surface: a free strip on a straight edge gets a far curve that can bend
- f2982b47a jyviko: Sheet tests: the tiny cut inside the exact circle is above SMLib's modelling tolerance
- cf40a3e6c jyviko: Boolean regression test: the raked wedge's R4 rounds the four edges the issue picked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0b7468729 jyviko: Curvature comb: every comb shown at one scale, kept by the command
- 6ab96c658 jyviko: View analyses: one toggle group, its state in the session
- 9a45d4248 jyviko: Kernel rig: inspect.analysis is a display analysis switch, exempt like the others
- 8d590c198 jyviko: Kernel tests: the long-setback G2 patch's reach past the box from its exact surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfa84e84d jyviko: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly
- 6cc759750 jyviko: SMLib import: an extruded circle is a cylinder over the face's trimmed range
- 9b3572797 jyviko: Fillet rig: the known-failing list names the report- cases, not their old ids
- 9851718ea jyviko: Curvature comb: purple envelope and orange teeth from their own theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 2d84f8a17 Brett Lawson: smlib: solidcore's new opt-in fixes are on: sliver iso curves degenerate, Coons corner patches tangent to their sides, a fillet's own edge kept at a corner patch, the corner ball centred where the axes meet, one solution for a seam point, 2D boolean covers of far faces, area only between solid and void, a coincident definition split across the split point, the tight box from the interval's knots, overlapping bands refused, and the SSI tangent-curve tracer
- 0877278d6 Brett Lawson: solidcore: move the pin to 2b81c033 (main, with solidcore#1640, #1623, #1655, #1673, #1668, #1662)
- 97a475d8d Brett Lawson: smlib: solidcore's torus check and step-wall opt-ins are on: the torus check reads its V interval, a spindle torus through its apex is a self-intersection, and a local operation builds the step wall between tangent faces moved apart
- f4eec76b4 Brett Lawson: solidcore: move the pin to dca3135cc (main, with solidcore#1630, #1632, #1649, #1664)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c9bf97ce4 jyviko: Blends: an edge is smooth only where its faces are tangent all along it
- 1e6c91a10 jyviko: Fillet rig: the concave arc where a bar's top meets a cylinder its sides run tangent into
- de9c005f2 jyviko: Blends: a blend face is named by its picked edge, not an edge it took up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf85e0a6c jyviko: Fillet rig: the knife edge's R2 round builds on the new SMLib pin
- 739e47b9d jyviko: Kernel tests: the basin rim chamfers check the kernel's refusal kind, not the named size
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94938b3b5 jyviko: Kernel rig sources: the kinds of the four sources the new cases cite first
- 191fa9839 jyviko: Fillet rig: the R7 round past a thin wall's inside corner held to its exact volume
- ecbca1f74 jyviko: Fillet rig: grade the 851 rows' rounds G1 at their own tangent seams
- 30dce7fba jyviko: Fillet rig: the sloped basin's rim loops with their mitred corners' exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8b9e0e0c0 jyviko: Continuity rig: an opened tube end capped G1 and G2, as cases
- 24a58066c jyviko: Sweeps rig: a circle touching its axis revolved a quarter turn, as a case
- 51316b7ec jyviko: Import rig: the horn torus quarter written to STEP and read back, as a case
- 8524458ce jyviko: Tests skill: when a check is a unit test and when it is a rig case
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 368b34e3b jyviko: Tessellation: a curved face's grid reads the quarter turn from its surface, not its parameter
- 9da160892 jyviko: Tessellation: two corners of a face a hair apart, within their tolerance, are one point of it
- 7cbbe2bc2 jyviko: Tessellation: two curves that touch within the chord tolerance share nodes, so the face pinches there
- 95f1258b7 jyviko: Motion interference: a collision is deepest where the parts share the most volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c1328212d jyviko: Tests: curved bodies' contact stop is checked, not the sweep's internal step
- 172c64cef jyviko: Tests: the naming corpus checks that references resolve and builds agree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ea43b5c2 jyviko: Tests: a tray's sheet names are checked by where their points lie
- 978ae1d51 jyviko: Tests: a mirrored sheet's flat pattern is its source's mirrored, as the code makes it
- 2be7b1b6f jyviko: Tests: the extruded ellipse is checked by its area, not its face count
- 51855589d jyviko: Tests: Open in EasyPrint's STL is read back, not measured in bytes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4d7553dd8 jyviko: Kernel tests: a ruled strip's moved handles are checked on its far curve
- 21c1ed541 jyviko: Kernel tests: rim rounds meeting at a concave corner are mitred, not swept
- 03054211b jyviko: Tests: the arc-touching cut is checked by its volume and area, not its face count
- 5e7e1485c jyviko: Tests: the knife-edge R2 fillet is checked once, in closed form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5229bbedd jyviko: Kernel tests: a small bend's display mesh is graded on the display mesh alone
- 4ff38619c jyviko: Kernel tests: the rounded shell's planar roles are graded by name and exact volume
- a3848d1d0 jyviko: Kernel tests: modifier histories are graded by what each face is, not how many changed
- a45d56aa9 jyviko: Kernel tests: the slot plates' STEP files are graded by their bounds and volume, not surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a0c24b87c jyviko: Kernel tests: the back edge then the arc is one more pair of the rounds-in-sequence test
- c69dbc5d3 jyviko: Kernel tests: the collapsed taper's mesh is held to its B-rep, the taper to validity
- 87e9123d3 jyviko: Kernel tests: a crowned patch's hostile crowns are refused for their range
- 65718cd41 jyviko: Kernel tests: the five- and six-sided fills are graded by what they make, not their face counts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3569298a4 jyviko: Kernel tests: a chamfer whose leg runs off the thin rim is refused, naming the largest
- a8f393ca3 jyviko: Kernel tests: the tabbed plate's rim rounds take their exact volume
- 5af467aef jyviko: Kernel tests: the box rounded after separate bottom rounds takes its exact volume
- 659bd866b jyviko: Kernel tests: the #871 part's fitting rounds take their exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2f88ca2f6 jyviko: Kernel rig: everyday chamfers of box edges and pocket rims
- 51641123c jyviko: Kernel tests: drop the mixed arc-and-line mitre test, the rig's 485 grades it
- e9963439b jyviko: Kernel tests: the round into a hole moves to the rig, with the hole cut the test's way
- 65e46a962 jyviko: Kernel tests: a round as tall as its wall and more builds on the disc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01d0d6bb9 jyviko: SMLib bindings: a curve list holds up to 16384 curves, as the C API now takes
- 96b248d28 jyviko: Kernel tests: a slot narrower than the taper closes partway up and builds; a closing hole is refused
- 42d4d0ecd jyviko: Engine tests: rounding the long edge then the left upright matches the three edges their chains take
- b66821c82 jyviko: Kernel tests: the third round at a mitred corner takes its tangent chain, a sphere octant
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 785b78bea jyviko: Surface Fair test: fair the B-spline patch on a saddle rim, not an offset sphere
- 1817cffaf jyviko: Shell: a basin shelled past its 4 mm rim measures its exact sharp offset
- 2e123eb3d jyviko: Kernel tests: a swallowed tip's volume is the drafted wedge's, every wall at the taper
- 1661fe292 jyviko: SMLib: pin 985faae, the batch of 2026-10-30 evening (tangency-labs/smlib#63–#65)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 3346f4172 Brett Lawson: smlib: solidcore's new opt-in fixes are on: UV trim checks on the surface, loop orientation from the loop's box, cones extended as themselves, the local operation's box, joined drop pieces, exact edges on analytic faces after a shell, and the two SSI trace fixes
- 271f0a39e Brett Lawson: smlib: a face's planar section runs on solidcore, as the capi's smlib_face_section (solidcore#1534)
- 436fae56a Brett Lawson: smlib: drafting a cylinder's side runs on solidcore (solidcore#1606, fixed by #1611)
- 39adb66ad Brett Lawson: solidcore: move the pin to 55748ecf (main, with solidcore#1648, #1645, #1644, #1641, #1639, #1637, #1636, #1634, #1657, #1656, #1654, #1653, #1652, #1651, #1598, #1622, #1618, #1616, #1603, #1626, #1661, #1658, #1660, #1629, #1663: attributes through offsets, shells, booleans and copies (#1462 P2, P4), the tight box from the interval's knots (#1054), a merge's UV trims named after their edge use (#435), SM_API ordered-point surfaces, exact projection copies, and the fork's WR-562, WR-547, WR-546, WR-541, WR-537, WR-536, WR-535, WR-533, WR-542 and WR-75 opt-ins)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 97d79e3b8 Brett Lawson: smlib: the solidcore tag test names what still holds it back
- 6a3558a96 Brett Lawson: smlib: a sweep along lines and arcs goes piece by piece on solidcore, as the capi does
- 1feba5af9 Brett Lawson: smlib: the bent-path sweep's ignore cites solidcore#1628
- 9ceddd9d5 Brett Lawson: solidcore: move the pin to 937a6319 (main, with solidcore#1534, #1537, #1544, #1617, #1608, #1582, #1591, #1625, #1586, #1619, #1620, #1611, #1647, #1646, #1643, #1642, #1638, #1635, #1633: planar section curves, SM_API intersections, cut, HCR silhouettes on solids, UV trim checks on the surface and tiny loops oriented, projection, trimming, tessellated boundaries and knot removal, the fillet refusal that leaves the body unchanged, Cone::lean_cylinder as a cone, and the fork's WR-260, WR-550, WR-545, WR-543, WR-80, WR-534 and WR-532 opt-ins)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 73b053221 jyviko: Face capture test: extruding a split face in an uncaptured component is refused
- 918429c6d jyviko: Sheet machining: a trimmed To Object tool is measured as the prism its record proves
- f37b95498 jyviko: Native B-rep: a body is written as it serializes, not through a JSON value
- 298869f4d jyviko: Engine tests: the hostile-parameter test builds its starting model once per command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01477bb14 jyviko: Tests: the saved curved strip is the link a truck build saved
- 0c4f54edf jyviko: rustfmt
- 74001e532 jyviko: Tests: check what each operation is for, not how many faces it makes
- a84369fe7 jyviko: Sheet convert: a wall cut off at its strip keeps each corner with its own edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- c8adedaec Brett Lawson: smlib: solidcore's new fixes are on (taper tangent corner planes, holed revolve void, loose tangent edges refused, scaled extrusion origin zero, booleans skip faces apart)
- 744f7574d Brett Lawson: smlib: drafted extrudes keep their corners and curve sweeps keep the profile where it lies on solidcore (solidcore#1449, #1450)
- dafb25b4b Brett Lawson: smlib: the body check reads a Caller body's recorded keys on solidcore (solidcore#1584)
- 2ad118666 Brett Lawson: smlib: curvature-continuous rounds and corners left open on solidcore (solidcore#1438, #1439)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- a69016f21 Brett Lawson: solidcore: move the pin to e4379b45 (main, with solidcore#1573: the #1024 rail-through-boundary-vertex test, plus the CreateCurveApproxPoints and PolyBrepCopy ports)
- 2308fa5be Brett Lawson: solidcore: move the pin to ddfb3895 (main, with solidcore#1569 and #1533: the 3x2 mixed corner at a concave unfilleted edge, and SmSurface::ApproximateSurface)
- f23aa76d3 Brett Lawson: smlib: an offset or other non-NURBS face surface exports through ApproximateSurface on solidcore (solidcore#1441), and the new fixes are on
- d4cec2ca9 Brett Lawson: solidcore: move the pin to b2450cbf (main, with solidcore#1568, #1579, #1581, #1585, #1597, #1604, #1600: attributes through booleans, taper corner rules, the curve sweep, check_brep naming, fillet thirds and corner marks, WR-302)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf74dcbbe jyviko: Tests: a round wall is one face, its name without a piece number
- 8f914ddd2 jyviko: Tests: the saw cut's halves named after their faces, listed in the kernel's order
- 1a5a3b5eb jyviko: Tests: an extended cylinder strip stays one face in every mode
- a3f150257 jyviko: Tests: the tapered bosses' volume in closed form, not truck's measure
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ec4eebaa8 jyviko: sew: a folded pcurve has no piece shorter than it lifts onto its edge
- 1bc8b204f jyviko: Kernel tests: a circle is one closed arc, a round wall one face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 41206c065 jyviko: Sheet metal: a whole circle in the outline is sewn as its two exact halves
- 374d3b7e8 jyviko: Sheet machining: a depth an ulp off the sheet's face is on it
- 909f9a20e jyviko: Sheet face names: a triangle takes a flat face's name only where that face faces its way
- ff9ccaf1e jyviko: Sheet tests: the DXF outline and the folded volume as the exact flat pattern and measure give them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ae748417 jyviko: Robustness: seed 5's edge-only join keeps two bodies, as joins have since 94ee28d5c
- 48d72ba2b jyviko: Convert Mesh: a triangle of no area is dropped, not refused (#4561)
- a0a75dc78 jyviko: Kernel rig: import/4561 passes, off the known-failing list
- beaed5b35 jyviko: Kernel rig: threads/2369 names the tap maker's 6.8 mm drill for M8
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4ebc3d078 jyviko: UI tests: the thread catalogue's error and Press Pull's hole wall as they are now
- 2debdd87a jyviko: Pi case test: each standoff is four faces, its walls one face each
- db757efc7 jyviko: Tests: the pi case and the hole wall read as on green-truck-era-tests, so both branches agree
- 191c1b855 jyviko: Fair: a net of up to 128 x 128 control points, the band bounding the solver
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8b45f277 jyviko: STEP import: a void reads as a cavity whichever way its shell flag points, again
- 64188ce43 jyviko: Planar regions: a hole goes to the material that holds it, read closer than the hole lies
- 1a0289011 jyviko: Planar region tests: edges on one line are one edge of the result
- 514426e5d jyviko: STEP import: a closed spline a face lies across the start of starts clear of the face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c47c1d26a jyviko: Tests: the fit and taper tests use geometry that still doesn't fit
- 8c37bc756 jyviko: Fillet rig: R10 past the full round is refused naming 7.5 mm, as the case asks
- a100c7c06 jyviko: Loft rails: a station grows about its section's centroid by length, not the mean of its control points
- e5476706b jyviko: Issue 616 test: the lid's volume is its closed form, 6703.5344
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b779364 jyviko: Tests: a point path's sweep has a wall along each line; coplanar walls join at a corner
- d945cf53a jyviko: Fillet and chamfer: a refusal as too large names the largest size that fits
- 8bcd81244 jyviko: Tests: a blend refused as too large is SMLib's NO_ROOM, in its own words
- deaf8e679 jyviko: Tests: convex blends past a cliff are cut from the part, as the owner decided
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b9d0a3308 jyviko: Mesh memo test: SMLib's booleans mesh neither operand
- b6c3bf3c5 jyviko: Face capture test: an Offset Face's top is anchored by its exact history name
- 1ee5f1af3 jyviko: Kernel: a mitred sweep carries a slanted section all the way to each mitre
- 1e4b64402 jyviko: Provenance: a sweep's origins are the ones it recorded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 15c31a96f jyviko: Kernel: planar source lineage finds each face's support through an index, with no budgets
- 049b2bc40 jyviko: Lumps: a face-source table of another length is refused, never sliced
- f60bf96df jyviko: Planar sources test: two bodies side by side joined as the record requires
- e1b762c4b jyviko: Booleans and Shell keep the lines faces were split along on purpose
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ffb1e650d jyviko: Isocurve Analysis: count curves each way, evenly spaced across the face
- 177eb207f jyviko: Exploded views are shown only: the design's placements and Capture Position leave them out
- 8d72cfa59 jyviko: SMLib export: a face's outer area reads only its own loop's edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7e613b6f jyviko: Records: the item budget bounds input, not the kernel's own results (Refs #3992)
- cf2b3a62f jyviko: Fair Surface: a face of degree 1 one way fairs along its curved way, and a face with nothing free is left as it is
- 16d467e14 jyviko: Point and Plane Along Path: exact on the path's curves by arc length, and a t outside 0…1 is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97935eed8 jyviko: Inspect: the centre of mass from the exact faces, as Measure takes it
- d094d43f2 jyviko: Compare Bodies: each region measured exactly, on the cut of the two bodies
- 864bcbccb jyviko: Compare Bodies: a region the exact cut cannot measure has no volume and says why, never an estimate
- a1dbb7c08 jyviko: Kernel rig: the two G2 corner cases are graded clear of the vertices, as the ladder grades them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 80d08659f jyviko: Kernel rig: the booleans, import and threads lists name the 5 cases that fail on the pinned SMLib
- 5c45570c9 jyviko: Kernel rig: rustfmt; measured values in results are decimals, within tolerance; the ladder records 06/023 passing
- 393a9aab6 jyviko: CI: native and reference tests stay on pushes until develop is green
- 322ac2592 jyviko: CI: the release gate still calls ci.yml (workflow_call)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6af622978 jyviko: Threads: a taper thread's groove follows its crest cone across the section, so no sliver of the flanks is left
- 3f5efdf70 jyviko: Kernel rig: one results check, each {step, pointer?, json, rel?, abs_mm?}
- dc093b0cb jyviko: Kernel rig: a symmetric surface extrude with no convention is the total distance (#9091); the per-side reading is its own case
- 55338e139 jyviko: Kernel rig: each area's PATHS names only its own files, and EXEMPT lists only commands no case uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 0d3c46dad Brett Lawson: solidcore: move the pin to 6a068272 (main, with solidcore#1419 WP4: the level-2 AssertValid tests and SmSurfOfExtrusion::AssertValid, #1578)
- 41e902eaa Brett Lawson: solidcore: move the pin to 0ae36782 (main, with solidcore#1452: SolidError::sm_status and a port-invariant variant)
- c13d760fa Brett Lawson: smlib: a copy queried under the arena's identities is a port-side invariant (solidcore#1452)
- 76c755508 Brett Lawson: smlib: a call answers None exactly when solidcore's error stands for an SMLib status (SolidError::sm_status, solidcore#1452)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9fecf7709 jyviko: Kernel rig: interference and clearance between placed occurrences
- 22cd8e74f jyviko: Ladder generator: cases.py writes the values committed by hand for 05/007, 06/017, 07/016 and 11/003
- 487914427 jyviko: Ladder 05: UNC, UNF, Rc and NPT tapped holes, each drilled to its tap maker's drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3b7dabdb7 jyviko: Kernel rig: bodies moved, copied and extracted, designs inserted, occurrences copied, reparented, dragged and exploded land where worked out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7eb8a5d4 jyviko: Kernel rig: contact sets stop a drive at the block, touching faces don't, and edit, list, enable and disable do as coded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 489441907 jyviko: Kernel rig: motion studies play, plot and trace to known values; a crank-slider's slider follows r cos t + sqrt(l^2 - r^2 sin^2 t)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 236a5597e jyviko: Kernel rig: gears turn by their radii, a rack travels r per radian, a screw its lead per turn, a disc cam lifts 2e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0da95a8cc jyviko: Kernel rig: each joint type moves its part to the placement worked out by hand, limits clamp, as-built keeps it in place
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 445f6faa4 jyviko: Kernel rig: parameter cases, an expression in a sketch dimension and a cyclic one refused
- 2cd1a0335 jyviko: Kernel rig: an assemblies area, with the source files that rerun it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 305c36479 jyviko: Kernel rig: inspect cases, the gap between two spheres, their lens where they overlap, none past the clearance
- 4355e15df jyviko: Kernel rig: inspect cases, a box against a taller one and an identical one, and a tolerance out of range refused
- 7b1fbb57f jyviko: Kernel rig: inspect cases, the comb of a sketch circle and line and a cylinder edge, and nothing picked refused
- 5c80ef4ad jyviko: Kernel rig: inspect cases, three isocurves each way on a cube's top, and a count of 0 refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cacc394f9 jyviko: Kernel rig: inspect cases, the centre of mass and volume of a box, of a box and cylinder, and an unknown body refused
- f43a0c7ac jyviko: Kernel rig: inspect cases, the smallest radius of a fillet, an ellipse and a circular edge, and none on a box
- 311b57bb7 jyviko: Kernel rig: inspect cases, a fillet's seams are G1 with a 1/r curvature jump, a box edge is sharp, too few stations refused
- 58b384d7d jyviko: Kernel rig: inspect cases, the overlap volume of two boxes, none where they only touch, a box inside a box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ac12ba72 jyviko: Kernel rig: construction cases, where three planes meet, and parallel planes or planes through one line refused
- f72108895 jyviko: Kernel rig: construction cases, where two edges meet or come closest, and parallel edges refused
- 1acbf1e9c jyviko: Kernel rig: construction cases, a point on a vertex or another construction point, and no body refused
- 33e3b6379 jyviko: Kernel rig: the inspect area, what reruns it, and the analyses that only draw
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02ee36ce9 jyviko: Kernel rig: construction cases, the plane through parallel and meeting edges, and skew edges refused
- fbe540b40 jyviko: Kernel rig: construction cases, a point along a sketch line and arc, and one past the end held at the end
- a0bd94f4d jyviko: Kernel rig: construction cases, the centre of a circular edge, sphere, torus and sketch arc, and a flat face refused
- 8a8960f13 jyviko: Kernel rig: construction cases, where an edge crosses a square and a slanted plane, and a parallel edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0e3798ae jyviko: Kernel rig: construction cases, the midplane of parallel faces, of a corner, and of a plane with itself
- 3ff1347d9 jyviko: Kernel rig: construction cases, a plane through an edge or axis square to a plane, and a line along the normal refused
- 6fed4f996 jyviko: Kernel rig: construction cases, the tangent plane to a cylinder and a sphere, and a point on the axis refused
- 8be5341c7 jyviko: Kernel rig: construction cases, the plane through three points or vertices, and collinear points refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 776d979ce jyviko: Kernel rig: construction cases, an axis square to a flat face and to a cylinder through a point, and a point on the axis refused
- 84a326f16 jyviko: Kernel rig: construction cases, the axis of a cylinder, a torus and a circular edge, and a flat face refused
- 17c0aee44 jyviko: Kernel rig: construction cases, the line where two planes meet, square and slanted, and parallel planes refused
- f9c53503b jyviko: Kernel rig: construction cases, a plane turned about an axis in it, off it and along its own normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b8c6bb921 jyviko: Kernel rig: thicken a sheet into a slab and a tube, trim by a plane and by a circle, and refuse a stray keep_with
- 70f695c6b jyviko: Kernel rig: grade construction geometry and the numbers a command replies with
- 5c0db8e82 jyviko: Kernel rig: the construction area, with what reruns it
- ffd3d5fb1 jyviko: Kernel rig: construction cases, an axis on a straight box edge, and a circular edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75353cb04 jyviko: Kernel rig: extend, extrude, loft, patch, revolve, stitch and sweep surfaces, a normal case and an edge case each, with their exact areas and surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f861f44e1 jyviko: Kernel rig: a matched sheet meets its target's edge at the order asked, flat where both are flat, and a solid is refused
- 3d080e96a jyviko: Kernel rig: fairing leaves a flat patch flat and a face with no free control rows as it was; zero strength is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 425c8ed42 jyviko: Kernel rig: a blend between coplanar sheets is flat, a step blend meets both sheets at the order asked, and unchained edges are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ac95e47e jyviko: Kernel rig: a reversed normal sends a later thicken to the other side, and a solid is refused
- 680f2ee5c jyviko: Kernel rig: boundary surfaces through a square, a triangle and a network of four lines have their exact areas; five curves are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a01d82f30 jyviko: Kernel rig: untrim removes holes from a sheet, a cylinder sheet and a solid's face, and refuses a face with none
- b2cc77094 jyviko: Kernel rig: unstitch takes a box and a cylinder apart into their faces, or one face out, and refuses a single face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bc3c9185c jyviko: Kernel rig: grade the kinds of a result's surfaces, its B-spline degrees and spans, and its free edges
- 657c5af57 jyviko: Kernel rig: surfaces area; an offset plane, cylinder and sphere land exactly where the distance puts them, and faces across a sharp edge part
- 476b04ed3 jyviko: Kernel rig: ruled strips along a normal, at 45 degrees and tangent are the exact plane, cone and flat ring, and a closed chain mitres into a frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ba60bd9d jyviko: Kernel rig: plastic cases, bosses, lips and grooves, rests, a snap fit edge case and the plastic rules, each with its answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 67dd8892f jyviko: Kernel rig: bend table cases, JSON and CSV rows with angles, radii and K-factor allowances, and an unknown format refused
- 235645db5 jyviko: Kernel rig: the ellipse length's Simpson weights as a named step
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fce8e4a26 jyviko: Kernel rig: perforation cases, square and staggered fields counted hole by hole, a field kept clear of a bend zone, and a pitch refused
- c114e6c35 jyviko: Kernel rig: flat DXF cases, outline, cut and bend line lengths, an ellipse exact and as arcs, and no sheet refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2edf64952 jyviko: Kernel rig: hem cases, closed on a top and a bottom edge, open and flipped, on a flange, and one too short
- c60bcb55e jyviko: Kernel rig: path flange cases, a Z section, one line at 45 degrees down, and a path straight on refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 815711421 jyviko: Kernel rig: second cases for draft (two adjacent faces), rib (in plane), press pull (an edge), split face (sketch and tool face) and sketch projection (a face loop and a silhouette)
- acd7bb066 jyviko: Kernel rig: the boundary-fill crescent ends at the cusps, x = 5
- 45c955326 jyviko: Kernel rig: a case can check the files it writes and the commands' answers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e7810659 jyviko: Kernel rig: frames area, frame member and inserted profile cases with their exact sections, placements and a too-thick wall refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a5513a4e1 jyviko: Kernel rig: boundary fill cases, the lens and the crescent of two cylinders, and a point outside every tool refused
- f0eac58a2 jyviko: Kernel rig: align cases, face onto face as a move, a side face turned onto a top face, and a face onto an offset plane along its normal
- 1e9cefe1e jyviko: Kernel rig: web cases, two gussets in a channel's corners and two walls grown along the sketch normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af8f28e34 jyviko: Kernel rig: scale cases, a cube doubled about its corner, a sphere scaled into an ellipsoid of the same volume, and a zero factor refused
- e1724be62 jyviko: Kernel rig: pattern on path cases, bosses along a line, bodies turning with an arc's tangent, and instances past the path's end refused
- cf58e3735 jyviko: Kernel rig: replace face cases, a top moved onto a plane and a lower step raised to the higher top (fails today: SMLib offset of faces refuses closing the step wall)
- be4f15db6 jyviko: Kernel rig: bounding solid cases, two boxes with a margin and a sphere's exact box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d671bbbc1 jyviko: Kernel rig: every registry command has a case or an exemption (kernel-cases --coverage)
- 6701b1c5e jyviko: Docs: how the kernel rig picks its areas, how a new area joins, and the coverage check
- 585789c60 jyviko: Kernel rig: cone cases, a frustum on X and a full cone of negative height with their exact volume, area and centroid, and a zero height refused; a new solids area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e71177769 jyviko: Docs: the kernel rig gate, updating a known-failing list, re-recording the ladder golden
- d84d00bb4 jyviko: Release gate: the packages' dry run is unsigned and skips the release job
- 02e1f1841 jyviko: Kernel rig: each area runs only when the files its PATHS lists change, every area on the shared core
- b67e93211 jyviko: Kernel rig: an area's PATHS names only its own files, never the shared core
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 376bba92c Brett Lawson: solidcore: move the pin to 3c17ddb1 (main, with solidcore#1480: an intersection edge's end goes to its own vertex, and #1419 WP1's whole-body AssertValid walk)
- c191634b5 Brett Lawson: solidcore: move the pin to 7ca6ce7a (main, with solidcore PR #1427 SmBrep::LocalOperation, #1474 Nx1 corner, and fixes since 3c17ddb1)
- 9c7c139bd Brett Lawson: solidcore: move the pin to b19dbcb5 (main, with solidcore#1476: a shell's implicit offsets take every base upstream casts to a B-spline, and the offset sample bound scales with the input)
- 22a1c20b1 Brett Lawson: solidcore: move the pin to b3baca8e (main, with solidcore#1490 and #1491: a revolve's torus is never inside out and keeps the flag, and a one-circle full turn puts its seam at the profile)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6c5537df6 jyviko: Kernel ladder: a gate run fails on any case whose status or counts differ from the golden
- ee2a1ea06 jyviko: CI: maintainers' pull requests run the tests, and the reference tests run on pull requests
- b4fcd5910 jyviko: Kernel rig: every area and the ladder as a parallel gate on pull requests that touch the kernel
- 18d2dddac jyviko: Release gate: every check in full and in parallel before a branch replaces main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 53da86734 Brett Lawson: solidcore: move the pin to 2a47645e (main, with solidcore#1435: precise properties split at the surface's knots)
- cb79c32ee Brett Lawson: smlib: the curved primitives' measures, round trips and two sweep volumes run on solidcore (solidcore#1435 landed)
- 6e5722af9 Brett Lawson: solidcore: move the pin to fa3caa94 (main, with solidcore#1463: a revolve's cylinder is never inside out, and an inside-out NURB cylinder keeps its frame)
- 9c7e54be4 Brett Lawson: solidcore: move the pin to 43ca3745 (main, with solidcore#1473: SmShell::IsInnerShellOf, and #1419's level-0 helpers)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9008d13f3 jyviko: Surface Extrude: a symmetric distance is the total, as for a solid extrude
- de5c338e7 jyviko: Preferences: keep the older per-side reading of a symmetric surface extrude
- ac70662d6 jyviko: Sweeps: a path through a drawn 3D arc follows the arc, not a spline through its three points
- 7664925fb jyviko: Sketch: Project onto Surface keeps the side the projection meets first, in one curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bb4299e56 jyviko: Tests: a drafted cube side leaves the bottom and the opposite side Kept, the rest Modified
- 29adfd0d7 jyviko: Kernel tests: the barrel's side is the exact surface of revolution of its arc
- 5ada4fc8a jyviko: SMLib: pin 90aabff, a shelled round stays a cylinder and a step wall is ruled as its plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f3b77d71b jyviko: Tests: expectations for the SMLib fixes of 2026-10-29
- 567b764b9 jyviko: Viewport tests: the offset ellipse ring's 512 wall joins are all smooth
- 9d0fb564e jyviko: SMLib: pinned at 60b1c6a: the 43 fixes of 2026-10-29 (tangency-labs/smlib#14–#56)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c93b3ad5a jyviko: Engine tests: SMLib's builds where truck refused or approximated
- b6b59e7b3 jyviko: Naming tests: pieces of one name on a grooved disc, the merged boss wall by its point
- ac52443df jyviko: Ring tests: a cut's volume is the piece it took, not the difference of the ring's volumes
- de606715b jyviko: Placement tests: a body mirrored in SMLib reads back from its record valid
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- d35dcf022 Brett Lawson: solidcore: move the pin to 19d87ca7 (main, with solidcore#1442: walls that meet are refused as WALLS_TOUCH)
- 8493abc90 Brett Lawson: smlib: shell_walls_touch runs on solidcore (solidcore#1442 landed)
- 30d6331a5 Brett Lawson: solidcore: move the pin to 19587445 (main, with solidcore#1453: an offset edge between two analytic faces is their exact line or conic)
- f44e08128 Brett Lawson: smlib: shell_cylinder_open_top runs on solidcore (solidcore#1453 landed)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- f62d6ee6d Brett Lawson: solidcore: move the pin to 4cd55082 (main, with Ellipse::is_nurb_curve_circle, solidcore#1432)
- c11640214 Brett Lawson: solidcore: move the pin to f020a066 (main, with IsNurbSurfaceCylinder / IsNurbSurfaceTorus, solidcore#1433)
- c9b2c18eb Brett Lawson: smlib: circle, cylinder and torus NURBS forms come into solidcore (solidcore#1432, #1433)
- 04c2af035 Brett Lawson: solidcore: move the pin to 3546c9bc (main, with solidcore#1437 and #1445)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ee9fc3793 jyviko: Tests: a torus patch to thicken is cut from SMLib's one-face torus
- ca53656a2 jyviko: Schema tests: an empty face list is checked on the draft, which refuses it
- ab68a3d0f jyviko: View tests: the section cap test draws the cap in the cap colour
- 24bcaca03 jyviko: Engine tests: SMLib's faces, not truck's pieces, in the face counts and measures
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c341006a jyviko: Tests: a cylinder's side and a sphere are one face each, as SMLib builds them
- 6c9c679dc jyviko: Tests: a revolved sheet over one radian is one face, untrimmed over its whole span
- 8075b8f70 jyviko: Tests: a swept point path is its lines, and rails must turn with a cornered path
- b9d65e6bc jyviko: Tests: thicken across a sharp edge extends the offsets until they meet
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3c680d21a jyviko: Geometry: the closest point on a full circle just before its start is found before its end
- 30ceb44e6 jyviko: Tests: SMLib's faces, one per swept segment, closed along a seam, replace truck's halves
- 908bc756c jyviko: Tests: the matchsurf and mixed-fillet helpers read an edge on the curve its interval is on
- 98284eb1e jyviko: Tests: a box thinner than a body's tolerance may be refused instead of getting no certificate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 93bbde86e jyviko: Tests: a script keeps a fillet a parameter makes impossible, a radius below zero
- 913a61329 jyviko: Tests: a tilted cylinder's Intersect cut is checked on the cylinder, not by its mesh's count
- da4f122f4 jyviko: Tests: a face picked by point is found on a block of 256 drilled holes, as on #6720's thread
- d0daee90f jyviko: Tests: a cam's edge is picked on its rim, off the vertex where its circle's seam meets it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ff0dda537 jyviko: UI tests: picks that name one thing, and a thread that names its start
- 2523d13cf jyviko: UI tests: SMLib's cylinder has one wall and one edge per rim; split rims come from two arcs
- b71e5ae6f jyviko: Tests: edges are read on their NURBS forms, a chamfer's chain is its caller's, the cap test's hatch
- 138acad01 jyviko: UI tests: a frame member's volume is compared to the accuracy SMLib measures at
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 319e6b8b3 jyviko: Kernel tests: the chamfer on a tangent wall junction is measured on meshes fine enough
- 68a217d98 jyviko: Reference tests: the loft case is analytic, SolidCraft's correspondence with its closed form
- 73b028b5b jyviko: Kernel: a drafted extrusion of a profile with holes, every wall leaning on the material's side
- b2c5b1f5e jyviko: Designs before format 14: a split's pieces take the names its later features use them by
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a0c13910 jyviko: UI kit: a field's scenario handle is where the field shows
- 271f0c5de jyviko: STEP import: a face's loop through a pole closes its turn, so a dimple keeps its area
- 983b1ca8f jyviko: Sketch projection: a projected face's curves meet at the face's vertices
- 426a505a8 jyviko: Display meshes: tests count the planner's grids; a mesh's outline is one line per straight edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43c1b7b88 jyviko: UI tests: Isocurve Analysis's engine colour is drawn from the theme's accent
- 7bb5bb3d5 jyviko: Locales: Arabic and Hebrew for the version and section hatch labels
- e657e4086 jyviko: UI kit gallery: entries for the controls added without one
- 6a6cd8f56 jyviko: Sketch: a sketch's bounds reach its circles' and arcs' extremes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 23bfa1cf7 jyviko: Tests: the saved fitted-letters design measures its closed form, its letter as conics
- 0e3f01ec0 jyviko: Tests: a loft cut whose top is the basin's whole outline leaves the walls above as their own body
- b3dfcf1ff jyviko: Tests: an engraved face's letters project as conics, their exact quadratic Béziers
- 367beae69 jyviko: Viewport: the analysis legend stays above the floating History card again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a94a025c jyviko: Tests: freezing rebuilt arc borders gets its rebuild from a notch across the arc
- 5cbfbe35d jyviko: Tests: interference lists the pair of a solid and an imported mesh as not checked
- 5489599c0 jyviko: Tests: a face with no attachment is a rib's wall, whose feature reports no roles
- f5dfb78ee jyviko: kernel: a cut's tool face blocks a planar role only where it enters the result
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a31272194 jyviko: Sketch: an included 3D edge keeps its exact curve from the moment it is linked
- 1fb5e94da jyviko: Tests: Intersect's box outline is compared as lines, and a tilted cylinder's whole rim projects to its ellipse
- 9be29894e jyviko: kernel: a cut by a tool apart from the body is the body itself
- 2b0357a22 jyviko: kernel: two planar supports are one when SMLib would call them coincident
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fcd5f7997 jyviko: Tessellation: a node lying on another chord is untangled like a crossing
- 43ad9d0b0 jyviko: Tessellation: a slit (a side the loops run along both ways) bounds the face on neither side
- 534dffa96 jyviko: Tessellation: the band beside a slit and the sag refinement keep the face on both sides of it
- 7b984936a jyviko: kernel: an emboss's arcs run on their wall's own frame, and its seam is read from the circle's angles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f9347aca7 jyviko: Tests: the mirrored union's volume held to the two integrals' 1e-8 accuracy
- bb0b146a9 jyviko: Tests: #1510's parts are weighed by their exact volumes, not 1e-3 mm meshes
- d5bd1ebfd jyviko: Bridge: a support surface's shape read about a station in its middle has the right signs
- a6054603d jyviko: Tests: fillet removals from exact volumes; SMLib's rounds match Pappus and the quadrature
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a780de5f jyviko: Tests: the helical groove's removed volume from the cut's exact volume, not a 0.01 mm mesh's
- 80b7ce28e jyviko: Tests: volume checks held to what their measures can tell, not tighter
- a3e42e548 jyviko: Tests: the cap whose loops prism_measure compares is found by its plane, not as the last face
- fad9c44da jyviko: kernel: measure integrates to SMLib's finest accuracy, 1e-8, not 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 666ccd85d jyviko: Tessellation: sag refinement splits a flat triangle's long side and never across an obtuse one's short side
- 2b22b2cbe jyviko: Tessellation: a face's sides are flipped where the triangles lie closer along the surface the other way
- e0d5ee496 jyviko: Tests: thicken and raised-band histories checked as SMLib reports them, Meet edges and seams included
- 39e1dcea0 jyviko: Faceted boolean: a body's own mesh is closed once its faces' shared corners are one vertex
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ec4b7212 jyviko: Tests: a face's flat area may differ from its surface's by the sails its boundary chords bridge
- 4626f83e5 jyviko: Tests: a sketch curve splits a cylinder's one side face in two, not a half side
- 9e97bc470 jyviko: Tests: a split face without its record exports as the body has it, and the next operation joins it
- 47b1d716d jyviko: Tessellation: a whole sphere's loop starts off its poles when its seam has two segments
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8eb77affb jyviko: Kernel: a body's size counts its edges, so a sphere, cylinder or torus is its own size
- 6a06226ad jyviko: UI tests: the split face's isocurve pieces are each wider than the lines' spacing
- eb40e161d jyviko: Tests: the thread whose display is checked is made as the thread feature makes one, with exact helices
- 71ea626d0 jyviko: Tests: a quarter disc tapered outward builds, and its volume is the exact integral of its sections
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d91d3f2a6 jyviko: Kernel: a body moved by a non-rigid matrix keeps each face's source and paint on that face
- c1ead0fef jyviko: Kernel: a sweep along a smooth path names every wall, and a closed one has no caps
- 6387be309 jyviko: Tests: the high-degree line prism_curve certifies is written at the record's highest degree
- 55f48e4e5 jyviko: Tests: the sample-aliasing trap aliases by its knots, within the degree a record holds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5547cd98a jyviko: Blends: a picked edge is named as the blend takes it, the rim and not the seam
- 1cb713c96 jyviko: Kernel: an extrusion's wall seed marks only the edges nearest it
- db9cf693a jyviko: Kernel: an extrusion's cap is in its own plane however thin the extrusion
- de16a6b99 jyviko: Kernel: a half turn's caps keep their roles when its end plane is its start plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8c2fba07 jyviko: STEP import: FILE_DESCRIPTION and the preprocessor name a Y-up exporter again
- 5cc0d5e9c jyviko: Threads: a metric size without a coarse pitch suggests its fine pitches again
- e0545b2bd jyviko: Measure: an arc edge's angle is its span on the circle, not its NURBS parameter
- ae5dc2416 jyviko: Split Body: a face tool runs over its own surface's parameters
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a8753443 jyviko: Fill: the height-field fill tries grids up to 64 spans
- dc3d504ba jyviko: geom: a fill patch folds where its normal reverses between neighbours, not where it turns past the middle's
- bac6674ab jyviko: geom: patches about a fill's centre run in the spaces of their own sides, not one space of every edge's breaks
- ea6500559 jyviko: geom: patches about a fill's centre are solved by blocks, their banded interiors eliminated onto what they share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b389601b0 jyviko: Ruled surface: a strip on a cone is SMLib's revolve of its ruling, a cone face
- 1e7713d1e jyviko: Fill: a patch's edges and vertices hold its fit's gap in SMLib's tolerance model
- 4faee7dd8 jyviko: Fill: the general fill takes a loop of one or two edges in exact pieces of their curves
- c5b038548 jyviko: Fill: its tolerances follow a size that does not depend on where the body is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9095fce42 jyviko: SMLib export: a NURBS edge's interval a rounding past its knots is the NURBS's own
- b68f71a2d jyviko: Fill: a patch's edges are the body's own edges again, circles and ellipses included
- b540faaf5 jyviko: Thicken: a surface turned to its back grows the other way again
- ebb1d843a jyviko: Sweep: a parallel sweep whose path runs along the profile's plane is refused again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60f33f6fc jyviko: Feature walks: Repair Part has its fixture, its gap an input and its body renamed with the rest
- 075f307bf jyviko: UI tests: a shown dimension that breaks a later feature does it with a shell left no room
- 242bbc89f jyviko: Fillet rig: the known-failing list follows the SMLib 7e917f0 pin
- 8515dc1a3 jyviko: Blend tests: a vertical round run on up a top round's end arc (ladder 07-fillets/018) is SMLib's to end, and builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 229739a70 jyviko: Blends: a smooth edge and an unfinished tangent chain are refused saying why; SMLib's unsupported corner is named
- 0ec97c570 jyviko: Blends: tangent propagation off blends the picked edges alone; a refusal says how to change it
- 94d763c83 jyviko: Tests: a round run on through an earlier one by tangent propagation is matched by the same edges together
- a0eaceab5 jyviko: SMLib tests: a round larger than the cube is cut as if its faces went on, at its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d00ad78c jyviko: kernel: a patch builds G0 to G4, and Continuity Analysis reads each seam's middle at the order asked
- 102cde292 jyviko: Kernel rig: patched holes graded by their continuity, at clashing corners and in one sheet
- 7c9a9051d jyviko: Patch: the continuity choice's hover text says the corners stay tangent where the faces round them clash
- ef93b18ed jyviko: SMLib: pinned at 7e917f0: a corner patch tangent to its sides, an unsupported corner named, a torus from a NURBS a whole turn round its tube
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- d6b3bf27b Brett Lawson: Shell walls-touch case waits on solidcore#1442 (port fork a759622)
- 29a1ac5a6 Brett Lawson: Sweep cases name their solidcore issues (#1449 draft corners, #1450 curve-sweep placement, #1451 planar sections)
- 4f1ad5cc6 Brett Lawson: Cylinder shell case waits on solidcore#1453 (port fork fddc366 + 98ab1b0)
- c9aa5116d Brett Lawson: solidcore: move the pin to 9b76ac13 (main, with SmApiBrepMaterialCensus, solidcore#1436)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 86e4226ae Brett Lawson: solidcore backend: every UpstreamFixes flag on, and the ignored cases name their solidcore issues
- ce5de8bcf Brett Lawson: Sphere measurement cases wait on solidcore#1437 (trim_boundary_seam_wrap at the poles)
- 5140556c7 Brett Lawson: Blend refusals name their solidcore issues (#960, #1438, #1439, #430)
- 263f34850 Brett Lawson: Offset cases name their solidcore issues (#1440 face picks, #1441 ApproximateSurface, #1060, #1019, PR #1427)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 21eba6a38 Brett Lawson: claim: solidcore backend for develop
- 8c12073be Brett Lawson: Kernel: a solidcore backend behind crates/smlib, routed per operation
- 12ace4973 Brett Lawson: diagnostics.kernel: read and set which kernel answers, and see the routing table
- 976acfd76 Brett Lawson: Conversion tests: each ignored case names its solidcore issue (#1431, #1432, #1433)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9c84bdb jyviko: geom: the patch fill is tangent continuous across its own C0 knot lines, and tapers what its corners do not allow
- 2397a691c jyviko: geom: the patch fill is faired at the order it is asked for
- 0631d2d3a jyviko: kernel: a three-round corner patched G2 and G3, read off the faces at each seam
- 11af682c0 jyviko: examples: cleaning up rounds by patching their messy faces, G2 and G3
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f11c0c571 jyviko: Bodies: an operation's result is its record, not the SMLib body it was exported from
- b121d8d00 jyviko: frames tests: the moved combine tool's part is made ungrounded
- e0c7867b9 jyviko: run_strict: the box's volume to 1e-9, as SMLib integrates it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 00faac965 jyviko: kernel: a planar sheet's loop splits where it passes one vertex twice
- 5d25684a1 jyviko: sheet tests: the flat pattern as SMLib's exact 2D boolean makes it
- 52343ba23 jyviko: Robustness tests: a round's tangent chain and the lid's closed-form volume
- bc6d31e60 jyviko: GPU tests build their designs with SMLib, and the GPU jobs fetch it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ab3ba1af4 jyviko: Mesh: a ray through an edge two triangles share crosses one of them
- ccff7224c jyviko: Shell: its planar walls carry their shell roles again
- 068c6a6dc jyviko: Shell certificate tests: the saved strips are saved data, not rebuilt pieces
- b9d4ad74f jyviko: kernel: a planar region inside another's hole keeps its material
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17465a63b jyviko: Tests: the kernel-cases ladder is the reference for what the kernel builds; the seeded robustness goldens go
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 517fc01dc jyviko: Fillet rig: a regression gate on every pull request that touches fillet code
- b91ad9de2 jyviko: Splines: every degree a B-rep record holds is evaluated, so a G4 blend of degree 9 gets its pcurves
- 175b4f2ac jyviko: GPU tessellation: the shader's basis slots follow the CPU evaluator's highest degree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 39bf63b16 jyviko: Kernel rig: designed continuity cases, G0 to G4, that prove the measurement
- 52339b7ec jyviko: Kernel rig: fillet cases for the open fillet issues, each with its exact answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b859fe6 jyviko: STEP import: a whole sphere bounded by one seam has its frame on that seam
- ce71791ec jyviko: Spline surfaces: a closed spline whose outermost knots appear once is periodic
- c7373279d jyviko: Viewport: hidden edges are drawn before the visible ones, so a visible edge is never covered by a light hidden copy
- b3cb826ed jyviko: Engine: an optional check before every command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6055ce6fd jyviko: step_in tests: knot multiplicities refused per knot, then by their sum
- ae393fd9c jyviko: step_in tests: a face with too many bounds is refused by the reader's own limit
- fc3a13f17 jyviko: step_in tests: the import's repair notes for added seams and turned faces
- 4688c0f20 jyviko: STEP import: a whole round face whose seam is off its frame's quarter lines is turned onto one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d2858cb3d jyviko: STEP import: a circle edge between two vertices is the arc between them, however short
- 8b4b4a9d6 jyviko: SMLib pcurves: an end SMLib moves within the tolerance it held the edge at is mapped
- 6c355fdf7 jyviko: step_in tests: the cube fixture's edge directions clear of the assembly fixtures' ids
- efdc245d1 jyviko: step_in tests: a face the reader refuses leaves the rest of the solid as surfaces, named
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cfaf4ab55 jyviko: Kernel rig: the reason each refused sheet-metal, sweep, crash and ladder case must be refused for
- 30dc4c860 jyviko: Section hatch by part: touching cut parts never look alike
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2dd505d83 jyviko: kernel tests: rustfmt
- ee4d4b5a5 jyviko: STEP import: a round face off its frame's quarter lines is formed within one turn
- 97a31c0c0 jyviko: SMLib: the prebuilt where a union that seals a void keeps its enclosing shell first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 025344dee jyviko: A refused face is tinted as well as ringed
- 25642b6d2 jyviko: STEP import: a part's later instances in a window wait for its first, not end the window
- c1713994f jyviko: Body::unmeshed_faces counts on the coarse plan, without making the mesh
- d0081b235 jyviko: kernel: a placed copy is planned as its original, moved, as its mesh already is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 188011736 jyviko: A part the modelling kernel refuses is named, with what is wrong and what to do
- d3b8c3dc5 jyviko: Browser: Repair Part is planned under #8371
- c15c39443 jyviko: Open and import card: the step marks share one box, size and stroke
- 090fcec6c jyviko: A refused face is ringed in the error colour while the window points at it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 06fbcdfec jyviko: Fillet dialog: Setback shows its default as a length and flags one too small before OK
- baa44fc64 jyviko: Fillet dialog: a setback the field flags is not refused again under the dialog
- b7d813bd6 jyviko: Open and import card: three plain steps instead of a status line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 33acb6dc3 jyviko: Section cap by crossing count: a body touching the cut body no longer shows through
- c33bae870 jyviko: Section cap: only closed bodies take part in the crossing count
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97721ad05 jyviko: Fillet setbacks not past where the rounds meet are refused naming the least; the rig grades a refusal by its reason
- 3fd5e138c jyviko: kernel: rustfmt
- 61a1f8bf2 jyviko: STEP import: a face's NURBS form ends where its boundary does, within its tolerance
- cd4f72572 jyviko: STEP import: a surface model's closed shell beside a sheet is a solid of its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 912bccef6 jyviko: Isocurve Analysis: faces on one surface share their lines
- 29744b811 jyviko: Preview: the ghost leaves out the surface the changed body keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739153d3d jyviko: Fillet dialog: one option model, plain labels, refusals in plain words
- e4844753c jyviko: SMLib: the prebuilt with a torus or sphere keeping its NURBS form, and the concave mixed fillet corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd5319a0e jyviko: docs: the kernel's move from truck to SMLib, as written up on #4012
- 4cb0d6ee9 jyviko: STEP import: a refused solid comes in as a surface body of its exact faces
- e19785620 jyviko: STEP import: a refused solid's surface body faces as the file has it
- 529fb7cf3 jyviko: Release: macOS builds on macos-15 (GitHub retires macos-14 on 2026-11-02)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a596dd95 jyviko: STEP import: a patch side collapsed within its vertex's tolerance is a pole of the loop
- cfee4a720 jyviko: STEP import: a solid no B-rep can be made of is shown as a mesh of the faces that read
- 5bfecd8a0 jyviko: Tessellation: a loop corner on a side collapsed within its vertex's tolerance is a pole; a face no method plans is left out, named
- 0102f95dc jyviko: Tessellation tests: rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0bee8c2ed jyviko: solidcraft-smlib: Brep::edge_face_distance, SMLib's own edge/face gap
- 5d6810128 jyviko: STEP and SMLib: no edge or vertex tolerance past the 1 mm SMLib takes
- 005b1e6ea jyviko: SMLib pcurves: an edge past its face's patch gets a tolerance that covers it
- f327cdb3d jyviko: solidcraft-smlib test: an edge 2.5 um past its patch keeps its interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd34314d5 jyviko: UI: one continuity control for every continuity choice
- fab8948b3 jyviko: Clippy: assign operators and is_multiple_of in the continuity code
- 1260353f4 jyviko: Fillet Corners: the shared continuity control says what each corner builds
- bf16a76a4 jyviko: SMLib: the prebuilt with eased setbacks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f042d2073 jyviko: Isocurve test: the spline face's hole is an inner loop of one face (Refs #770)
- cb8712aa0 jyviko: Continuity: one table of orders G0-G4, and one check of what each construction builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0694fd4e8 jyviko: STEP import: an edge through a face's pole is split there
- 1d70ac267 jyviko: tess: a face whose boundary still crosses itself after untangling is filled leniently, not the whole body refused
- 77bd85cab jyviko: cli: snapshot --quality coarse|normal|fine|ultra meshes the bodies at that display quality
- 1404bc1f5 jyviko: STEP import: a spline face's edges are measured on their pcurves only, not by nearest point first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e2c0c0a20 jyviko: pcurve: the lift check samples its interval's end exactly
- 293d19f65 jyviko: STEP import: a vertex's tolerance covers its edges', and edge samples end exactly
- 19c4a1502 jyviko: SMLib pcurves: an end SMLib sets within the edge's tolerance is mapped onto our interval
- fc08b5f99 jyviko: bspline: a parameter a rounding past the domain's end is that end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfcdefa92 jyviko: STEP import: a loop jumps at a pole to within the tolerance, as its pcurves closed it
- 7ba82d729 jyviko: STEP import: spindle and horn tori, and a negative major radius
- 3a7b51f72 jyviko: STEP import: an edge's distance from an analytic face is measured before its closed-form pcurve
- fcb162448 jyviko: brep: the geometry check reads a pcurve at its edge's parameter within the interval's rounding
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 07cb8c7cc jyviko: STEP import: an edge off its face's surface carries its gap as its tolerance
- 21c64fb24 jyviko: tess: an edge loop of fewer than three segments is split until it encloses an area
- 9da3174bb jyviko: solidcraft-smlib: a revolution goes to SMLib as its NURBS form alone
- 31b9410f5 jyviko: solidcraft-smlib: a horn torus to rounding is no ring torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 05f1c6b9a jyviko: Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
- 87e7fe472 jyviko: Tapped holes: a preference keeps metric's major-less-pitch drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9717fab2f jyviko: Tapped holes: Rc and NPT, and a modelled thread with the thread's End
- 72e0e0094 jyviko: Ladder 06/017: the golden entry from a run of the case
- 376a91ad7 jyviko: Hole presets: a modelled tapped thread and its End, and every catalogued size
- b6c3b32a9 jyviko: Tapped holes: an Rc or NPT hole takes the stocked drill under its standard minor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 361b35afe jyviko: Thread: a shoulder thinner than the overrun's reach is still a shoulder
- 5fe141c0f jyviko: Thread: the start never fades; ease_in is gone
- 386598282 jyviko: Thread dialog: the Ends section is Start (None, Chamfer) and End (Square, Fade)
- 80e47130b jyviko: Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c4212c04 jyviko: Thread: the chamfered tip at the start or at both ends
- 75deb73aa jyviko: Thread: ISO 228-1, ISO 7-1 and NPT pipe threads, taper threads by a radial law
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4f6f254d0 jyviko: smlib: a setback left open is a profiler span like every other SMLib call
- 676919d4d jyviko: tess: a face no method plans is filled leniently in (u, v), and named in the stats
- 1acbe2806 jyviko: Fillet dialog: plain words for continuity, Corners with Setback out of Advanced
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b2fc5e1fb jyviko: smlib, kernel: a refused setback corner is named by its point and why
- 855575473 jyviko: SMLib: the prebuilt with setback-open corners and the refused-corner index
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d8282b336 jyviko: doc, engine: corner: g2 sets each corner back for its G2 patch
- 8fbb575a5 jyviko: kernel-cases: a continuity check, and ladder 07/015 graded by it
- 808913777 jyviko: kernel: G2 corners at concave corners, mixed ones refused
- ba38fbd2a jyviko: kernel-cases: ladder 07/019, a concave corner's G2 patch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6263db8d6 jyviko: smlib: Brep::blend_setback_open, set-back corners left open with their holes
- d63a50c47 jyviko: kernel: seam diagnostics give every station's values
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- faffa6664 jyviko: Profiler: the diagnostics.profile test holds while other tests record
- 7fde0bdff jyviko: Profiler: docs/perf.md says how to switch it on and read it
- 29225d2c8 jyviko: geom: fill_matched, a height field G1/G2 to the faces beside its loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 10ea00e74 jyviko: Profiler: every SMLib C API call is a span, timed by the C API itself
- 319c0bc9f jyviko: Profiler: kernel operations and STEP/IGES import stages are spans
- 9cd655259 jyviko: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile
- fafd977b0 jyviko: Profiler: the Profile operations preference switches recording at run time
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6645e2c6 jyviko: Threads: a modelled thread's tangent flank joins are not drawn
- 970c29745 jyviko: Smooth edges: a measured crease is kept apart from a tangent display join
- 541b94a60 jyviko: Smooth edges: hide only joins inside one smooth surface (G2); draw tangent joins
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57d48aa9f jyviko: Clippy: the kernel's and engine's warnings on develop
- b52a01e29 jyviko: Attribution: the hand-written box STL of kernel case 4561
- 15caa50d2 jyviko: CI affected crates: no truck crates are vendored any more
- c95580d04 jyviko: Smooth edges: one G1 rule on exact surfaces and pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d13300b0a jyviko: cargo fmt: the format-40 change and the rebase's export list
- 873124c49 jyviko: CI: develop runs like main; SMLib is fetched after the Rust cache is restored
- 6517d1ee6 jyviko: Arabic and Hebrew catalogs: #4414's thread direction labels out, as in every other catalog
- fddb57c0d jyviko: Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e26dc640 jyviko: The command line and the web app link SMLib by default too
- 826f36a79 jyviko: CI and releases fetch SMLib before building
- 8aea8e5a8 jyviko: Format 40: a thread's hand on tapped holes too; v0.24.0's handedness opens as hand
- 652d3a2cb jyviko: ui: main's browser picks (#4774) read the placed model through session_world
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a57ce13e7 jyviko: thread: a shaft thicker than a modelled thread is refused, never turned down
- 6b9f5e0e4 jyviko: thread: main's screw direction (#4414) out; the thread's hand is the one direction
- 5fc160732 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3e9c70e26 jyviko: Cargo.lock: resolved for the merged manifests
- 6e15b9676 jyviko: engine, kernel-cases: tangent joins out of the corner-pick count; 3383 and 5024 recipes to main's rules
- 46294c7c2 jyviko: kernel: STEP placements by a transformation operator keep its axes and scales
- 3d0f6aa3f jyviko: kernel: IGES trim pieces closed onto their meeting points in main's assembly reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b310512e9 jyviko: kernel-ladder: tier 11 threaded parts grade their geometry
- f6b42d416 jyviko: kernel-ladder: 07/016 is a refusal; 07/018 the same corner with r2; cases.py makes 013
- fb384be9c jyviko: smlib: build against SMLib a15b5a2 (replay of usd-brep 1.0.1 with the fork's fixes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3f771998 jyviko: kernel-ladder: tier 07 corner cases grade their geometry
- 0d7acb0ce jyviko: kernel-ladder: 08/007 grades the rounds run into the chamfer
- c9dcc42a1 jyviko: kernel-ladder: tier 09 shells grade their geometry
- 05e0dc17b jyviko: kernel-ladder: 10/008 grades the vents as four times one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 191b2f4c4 jyviko: kernel-ladder: cases.py makes every committed case again
- 977230b7c jyviko: kernel-ladder: tier 04 cases grade their geometry
- 84473f61f jyviko: kernel-ladder: tier 06 grades the threaded boss; both hands and Tr40x14(P7) added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8edf5b873 jyviko: kernel-cases: the ladder's golden recorded after the thread rework
- 2e1c1097a jyviko: geom: a degenerate point's normal steps into the parameter interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3287bcba9 jyviko: Threads with several starts
- 7bfc184e8 jyviko: A modelled thread's chamfered tip (ISO 4753)
- d433ce2c9 jyviko: Thread runouts: the groove fades out instead of stopping square
- fdede5a0a jyviko: Thread work in rustfmt's layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 610173e1f jyviko: combine: move each tool into its target's frame
- 3fb263d00 jyviko: hole: keep a countersink's tool within its rim above the face
- 1171c4c2a jyviko: A sheet metal body mirrored or patterned into new bodies is sheet metal (#3353)
- 5a9bf4742 jyviko: A converted sheet takes its rule's values at its own thickness (#4328)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 48abbbcc1 jyviko: kernel: a vertex a face's loops pass twice is one point of its (u, v)
- 1df330c79 jyviko: engine: a shell that opens no face makes a closed hollow body
- 5aeff43f8 jyviko: smlib: a horn or spindle torus face comes out as its NURBS form
- bd4e1926a jyviko: kernel-cases: 2928's base extrudes the ring it describes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 903e371fa jyviko: geom: a face's box reaches its boundary's extremes, not its samples'
- cfe1b8b92 jyviko: step: a loop through its surface's pole has its seam
- 0bea4631b jyviko: kernel: IGES trim pieces that miss their meeting point are closed onto it
- 0e6681a2d jyviko: kernel: the largest fitting fillet shrinks only on a refusal as too large
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 237f0ae74 jyviko: kernel, kernel-cases: a convex blend overflowing a cliff is built, with its analytic answer
- 7d300984b jyviko: kernel, kernel-cases: a shell whose walls would meet is refused, saying so
- 3be6ad433 jyviko: kernel: a tangent chain stops where the edges' convexity flips
- 098fac037 jyviko: geom: a face's loops lie in one turn of its periodic surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 773e627b4 jyviko: tess: no edge segment spans more than a quarter turn; loops touching at a vertex close
- 806268714 jyviko: tess: a face's sampled boundary never crosses itself
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 42e50a87c jyviko: smooth edges: tangent joins of planes, cylinders and cones, along straight splines too
- 89e23d1eb jyviko: record: a body built from a sketch has new edges, with no origins
- 8eb93ff06 jyviko: step_in tests: the cube fixture's edges lie on their lines
- 4b418c0d2 jyviko: kernel: how a body's material regions meet, read from the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667ee5665 jyviko: kernel tests: a blend meant to run along a tangent chain asks for it
- 74d02d2a0 jyviko: smlib: the fork with NVIDIA usd-brep 1.0.1 merged (f7f012b)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 306c7b75b jyviko: pcurve: a rim at a steady pace on a spline face, read from the edge itself
- 28e0eea80 jyviko: pcurve: each use's closed form or none, and a kernel's trims for the rest
- 1bf206259 jyviko: STEP and IGES import: SMLib makes the pcurves that have no closed form
- 879958721 jyviko: pcurves: a flat patch's are a plane's; SMLib's sheet loops read either way round
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2883981a0 jyviko: brep: meridians, revolutions and whole turns exact on their forms
- 6c385c843 jyviko: sew, step: face forms from the boundary's extent; trimmed profiles exact
- fd71e6a95 jyviko: kernel: assembled faces and edges on their NURBS forms
- f6f8b28c0 jyviko: Records require NURBS forms on circles, ellipses and curved analytic faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd873bb83 jyviko: sew: an edge folded across a bend gets a Hermite pcurve on the bend's form
- c376e8403 jyviko: step: imported faces and edges on their NURBS forms
- 69702833f jyviko: solidcraft-smlib: ellipse edges on their NURBS form, as circles are (fork 0c5868e)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c5dbf879a jyviko: brep: exact pcurves of forms: cut on planes, along the parameters of spline faces
- a4180ab42 jyviko: sew: faces and edges on their NURBS forms, their pcurves exact
- 57080f88c jyviko: fixup! sew: faces and edges on their NURBS forms, their pcurves exact
- 76a254137 jyviko: sew: a circle on a revolved face is labelled on that face's frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f070eee2b jyviko: brep, kernel: a face's side is read on its NURBS form (#4149)
- 58f60adbf jyviko: kernel: an assembled face keeps its NURBS form
- 807010c49 jyviko: brep: the NURBS forms of lines, circles, ellipses, cylinders, cones, spheres and tori
- f370d1e42 jyviko: brep: forms on their frame's quarter grid, across the seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6892ceac7 jyviko: brep, kernel: code that reads an edge's angles takes them from the circle, code that evaluates takes the NURBS form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b1326e48d jyviko: brep: an edge on a line, circle or ellipse carries the NURBS form SMLib holds it as
- 6adba90e2 jyviko: solidcraft-smlib: circle edges on their NURBS form, SMLib's trims kept on them (fork deec9cb)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e6f993fff jyviko: Revert "kernel: merged topology counts no seam edge (a face on both sides of it)"
- 4ea29e307 jyviko: kernel-cases: 818 counts its two cylinders' seams, as every case counts edges
- de0e5bf52 jyviko: kernel: a tangent chain stops at a smooth edge
- 369c897d8 jyviko: kernel, cli: clippy and the cli tests build again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 84bd2daad jyviko: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default
- d0ff1dcfa jyviko: doc: an extrude's taper without a corner rule picks one per profile
- 5e7aba8df jyviko: loft sections matched to their neighbours
- 2752eee61 jyviko: kernel: merged topology counts no seam edge (a face on both sides of it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b6a3b31ff jyviko: brep: a face on a cylinder, cone, sphere or torus carries the NURBS form SMLib holds it as
- 2e26e0567 jyviko: solidcraft-smlib: the export reads FACE_NURBS_FORM
- 03db54a23 jyviko: solidcraft-smlib: SMLib at the merged fixes: slice, seam check, analytic revolve, draft corners, blend refusal, union of many, NURBS forms (fork 03c14ca)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bcbb99005 jyviko: kernel, smlib: a blend larger than its faces is SMLib's refusal; blends take exactly the given edges
- 13e49e069 jyviko: engine: solid.fillet and solid.chamfer say they blend exactly the edges given
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ffbbc74d jyviko: step: a cone within the file's uncertainty of its limit plane over the face is read as that plane
- 0185ccc1e jyviko: solidcraft-smlib: Brep::union_all, the union of many bodies in one SMLib call
- 0213c3dfa jyviko: kernel: union_all, one SMLib union of many bodies checked once, history over every operand
- 83d965f30 jyviko: doc: a join into one target and an intersection's tools are one union_all call
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 045961445 jyviko: doc: an extrude's taper saves how it closes the profile's corners
- 1b5ca02b8 jyviko: solidcraft-smlib: SMLib's tangent draft corner meets lines at an edge (fork ccc56fd and docs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 09c979a4b jyviko: brep: a full circle in a profile is one closed arc
- 8e6c24aeb jyviko: kernel: a raised band reads its arcs' circles from the record
- d10041743 jyviko: kernel: emboss reads a wall's span from its arc's interval
- 0414f5a7a jyviko: kernel: assemble's unused CurveEval import goes with edge_point
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 99024b368 jyviko: solidcraft-smlib: SMLib at the candidate: solver statuses, range-end refinement, arc sweeps as cylinders (fork 1c8e415)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44744d3aa jyviko: kernel: a face's boundary runs along a pole as its pcurves say
- 01845c189 jyviko: kernel: planar sheets are built one simple loop at a time
- 529c2cf04 jyviko: solidcraft-smlib: SMLib's area counts the faces between solid and void only (fork 8400690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 78937d1db jyviko: brep: one basis-derivative routine, bspline::basis_derivatives
- afce22bb6 jyviko: solidcraft-smlib: mass properties of any body, by its material regions (fork 311946c)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 81cef1c60 jyviko: kernel: a free ruled strip is the exact ruled surface to a far curve of its own
- 9e2c1c57c jyviko: kernel: ruled surface docs and test for the free strip's far curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2a09b9943 jyviko: kernel: the test target compiles: the last tests on the record and SMLib
- 2f83aaa5d jyviko: kernel: clippy's own fixes across the kernel (needless borrows, assign ops, contains)
- f6afec8ea jyviko: kernel: dead code left by the port deleted; clippy -D warnings clean on all targets
- a0e17daa5 jyviko: kernel: cargo fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1b7fda4d3 jyviko: kernel: surfaces and SMLib blends without the smlib feature gate
- e1b9ea10c jyviko: kernel: placement, history, mesh-memo, display and issue tests read the record
- 8237cc927 jyviko: kernel: mesh, lump, loft-rail, untouched-face and intersection-curve tests read the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7646e8ff6 jyviko: kernel: compiles on the record — trim reads the tool's side near its body; mesh memo typed
- 748e796b2 jyviko: kernel: sweep histories attach with no edge origins given
- a5f5809ba jyviko: kernel: a ruled strip's side builder needs no mutable binding
- ee79235f5 jyviko: kernel: surfaces, bridge and loft rails clippy-clean; picked_loop gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9eb68e4 jyviko: solidcraft-step: a record's layout (solids, voids, sheets) and outer loops for every writer
- ed43871f7 jyviko: kernel: IGES export from the record
- 1d4811201 jyviko: kernel: STEP import tests and docs without the deleted face splitting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30ddda306 jyviko: solidcraft-step: write a schema 4 record as ISO 10303-42 topology
- d59bb0084 jyviko: solidcraft-step: revolutions under axis-keeping placements; void shells as the record has them; Reader::frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a8ca6d0f jyviko: kernel: Assembly::finish ends in Brep::canonical
- bd1095fff jyviko: kernel: the general fill's tests read the record; five- and six-sided fills are patches about a centre
- 5aaf405d8 jyviko: kernel: the second-derivative tests check the record's SurfaceEval::second
- 4897ce17b jyviko: kernel: loft rails tests measure against the record's surfaces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 849bb1f24 jyviko: kernel: face sections along a direction as SMLib's exact curves
- 876333480 jyviko: doc: an iso link along a direction on a solid is SMLib's exact section
- d9274aaf1 jyviko: kernel: the point-path sweep test expects the polyline's walls
- 13e9aca7e jyviko: kernel: exact projection, section and iso curves exported; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7b5d732e3 jyviko: kernel: project_onto_face, sketch curves projected onto a face as SMLib's curves
- 0ef5b910f jyviko: doc: a curve projected onto a solid's face is SMLib's projection of the curve
- 95e9a80fa jyviko: kernel: iso_curves, a face's isoparametric curve exactly, trimmed by its loops
- 814475f4f jyviko: doc: an iso curve of a solid's face along u or v is the surface's own curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6d0993817 jyviko: kernel: a ruled strip whose rulings turn along a free-form edge is refused, not fitted
- a6b41dd82 jyviko: solidcraft-smlib: Brep::project_curves, curves projected onto a face as SMLib's B-splines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1708fe0e0 jyviko: brep: Brep::canonical, any record in canonical order
- 98548fe16 jyviko: kernel: one canonicaliser; one tensor sheet
- f8e175273 jyviko: brep: Brep::split_edges, a record's edges split exactly at parameters inside them
- 65e141ac4 jyviko: kernel: stitch splits an edge at another sheet's vertex lying on it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30b02cdfa jyviko: kernel: the solid loft's rails anchored by loft_rails::railed; path curves shared
- 0d611ed84 jyviko: kernel: surface sweeps mitre at corners, as the solid sweep does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c7afe5eb4 jyviko: doc: a lip is SMLib's raised band and a groove its exact rim band, nothing else
- 89423b88e jyviko: doc: a sheet bore is cut once, with the drill clipped to its panel
- f4fa8a407 jyviko: kernel: the touching-face checks, extrusion batching and clearance probe are gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7c0d9b5e8 jyviko: kernel: the general fill on loops of five or more edges, its patches about a centre
- 87907628e jyviko: kernel: surface match on the record, through bridge's record API
- 22fde06a3 jyviko: kernel: loft blend on the record, through bridge's record API
- 7e7193b33 jyviko: doc: the faceted thread groove is gone; the groove is SMLib's exact screw sweep
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- beebf2203 jyviko: kernel-cases: --dumps=DIR leaves each failing SMLib call's inputs for replay
- 83c0f4e2c jyviko: AGENTS.md: SMLib is the kernel; no switch, no other kernel
- 1b27c134d jyviko: kernel: an intersection curve is where SMLib's imprint cuts, exactly
- 9398b2586 jyviko: kernel: intersection edges exported from the crate root
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e00645ca5 jyviko: kernel: crate root follows the split, surfaces and SSI ports
- 252b2947a jyviko: kernel: mesh bodies built by Body::of_mesh; fuzz booleans have no fallback counts
- 0013249c4 jyviko: kernel: Patch of a body's edges is fill's patch with no crown
- 08f061b02 jyviko: kernel: boundary surfaces on the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9b5e0a8b4 jyviko: kernel: T-spline sheets as record faces; NURBS faces on the record
- 5c1b335e1 jyviko: kernel: bridges read their support faces on the record
- b5a7d52b7 jyviko: kernel: bridges and surfaces read the body's own record
- c83bd8f94 jyviko: kernel: T-spline and offset tests read the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6fb1af00 jyviko: kernel: an arc's knots built without a borrowed temporary
- d3ca6e089 jyviko: kernel: loft rails on exact NURBS sections, the last section met where the rail ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0cbd9e19d jyviko: kernel: profile segments as exact schema 4 edge curves and pcurves
- e1326f37f jyviko: solidcraft-smlib: Brep::stitch and Brep::offset_sheet, and the fork pinned at e3d478d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 585334a29 jyviko: kernel: planar source lineage on the record, coplanar faces joined by SMLib
- 5c16e8dd1 jyviko: kernel: coplanar faces joined by SMLib's merge_faces, the record read from the body
- c802458ef jyviko: solidcraft-smlib: Brep::face_points, a point inside each face (smlib_face_points)
- 453a4dec7 jyviko: kernel: a trimmed piece's side is read at a point inside it, exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e520c9d42 jyviko: kernel: a body's record may be a surface body of open shells
- befcfecb7 jyviko: solidcraft-smlib: Brep::split_faces and Brep::split_body on the fork's split shims
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5d783066 jyviko: kernel: outline_union deleted, a retry of the old boolean with no caller left
- 25b128698 jyviko: kernel: crate root follows the query-module port; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- abf46cc21 jyviko: kernel: clearance reads each face's surface from the schema 4 record
- f53405d6b jyviko: kernel: plane_fit fits and certifies planes on the schema 4 record
- bd956b88a jyviko: kernel: spline_conv makes record curves, surfaces and tensor sheets
- abb7c37d8 jyviko: kernel: face_params deleted; a face's boundary in its parameters is the record's pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e463eabb6 jyviko: kernel: topo reads each face's surface from the schema 4 record
- 80e34cc8c jyviko: kernel: surface_kind reads faces and edges off the schema 4 record
- b0ad6f62b jyviko: kernel: body distance projects onto the schema 4 record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3ef93b363 jyviko: kernel: the general fill is the iso-parametric patch on three or four edges
- cfb5dc3ba jyviko: solidcraft-smlib: Brep::planar_faces and Brep::boolean2d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fa086dd5 jyviko: kernel: record.rs records history on the schema 4 record, by index
- c5c411de5 jyviko: kernel: an assembled record is the body; its history through record::attach
- 796d3e7d2 jyviko: kernel: boolean_record composes histories; healing is heal's
- f56a94eac jyviko: kernel: exact path helpers exported; SMLib pinned at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 166bfbacd jyviko: brep: records of bodies apart from each other join into one; islands stay inside their voids
- 065e61ec7 jyviko: kernel: Body is its schema 4 record, with its SMLib body made once
- 22734a55f jyviko: kernel: trim on the record: split, side by the tool's field, pieces removed
- 7bbdd3713 jyviko: kernel: untrim on SMLib (smlib_untrim_face), its history from SMLib's tags
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1d289dfd6 jyviko: kernel: fairing works on record curves and surfaces; fair_faces rebuilds through SMLib
- f9f59d826 jyviko: brep: SurfaceEval::second, a record surface's exact second partial derivatives
- 748d9f25e jyviko: brep: CurveEval::derivs, a record curve's point and first derivative
- e01018839 jyviko: kernel: seam continuity measures the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9f71e93e2 jyviko: kernel: Delete Face with healing on the schema 4 record
- 3bd1cc534 jyviko: solidcraft-smlib: Brep::merge_faces, SMLib's removal of topological edges and vertices
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cbf28a4fd jyviko: kernel: the prism boolean modules are gone from the crate root
- 9268a1e88 jyviko: solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b11433bc5 jyviko: kernel: smooth display edges classified on the schema 4 record
- 3ca3638c5 jyviko: kernel: the curve, loop and vertex blend modules are gone from the crate root
- b0cc84b28 jyviko: brep: a record moved rigidly, exactly
- fa3d914af jyviko: kernel: SMLib measures mass properties at its documented 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6e17d26dd jyviko: brep: a spline's closedness is worked out once, not on every evaluation
- 51d7fc413 jyviko: kernel: IGES trimmed surfaces close their loops and split into separate bodies
- f71cb3d99 jyviko: engine: revolve about a construction axis given by name
- 85da7d6c2 jyviko: engine: count a face pick's work as it is done
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d61efb306 jyviko: kernel: a face's boundary takes its (u, v) from the record's exact pcurves
- 4b8edef06 jyviko: kernel: the tessellator's tests plan the body's schema 4 record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667cd3356 jyviko: solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
- e57f2f2a5 jyviko: brep: a face's points search one grid of its surface, made once
- 1bc0df6d0 jyviko: doc: a join of many tools into one target unions them in a balanced tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69a7a85cb jyviko: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cac7d6eff jyviko: kernel-cases: the hollow ball of case 450 has two shells
- faae48d6e jyviko: solidcraft-smlib: Brep::loft_to_point, and the fork pinned at 0294982
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 520d934fe jyviko: kernel: SMLib sweeps that twist, scale or follow rails, railed lofts, and paths of points
- f870ecb87 jyviko: solidcraft-smlib: pin the fork at ffaf4e8, offset merge and intersection-edge ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e1a257169 jyviko: kernel-cases: SOLIDCRAFT_KERNEL=truck grades as the default kernel
- 1336352a4 jyviko: solidcraft-smlib: pin the fork at 2d7c7ed, the second round of SMLib C++ fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a630daee jyviko: tess: a hole in a closed face lies in its outer loop's period
- 693cba4e2 jyviko: kernel: a curved strip straight across and narrower than a side is its boundary nodes alone
- 20d4b1f4e jyviko: kernel: a spline wall winding round an axis sends its body to the display plan for meshing
- 5ed1e95a4 jyviko: kernel: a cut grid past the grid cap thins its lines instead of giving the face to Delaunay
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69ad1ae45 jyviko: solidcraft-smlib: the curve list carries nothing in a build without SMLib
- 1a5e60349 jyviko: brep: a point's parameters on a spline winding several turns are found on its own turn
- e1c631dd3 jyviko: brep: a pcurve keeps its tangent where its curve is smooth through a full knot
- 829d161f6 jyviko: brep: the projection runs Newton from up to 32 starts, nearest first, until one lands
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02bfd6e10 bherbruck: kernel: draft through SMLib
- d20e91f8c jyviko: doc: re-anchor a stored face pick strictly inside its named face
- 36b7aa267 jyviko: solidcraft-smlib: a build without SMLib keeps the sweeps' curve lists without a dead-code error
- d22e89bcc jyviko: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 714475b84 bherbruck: kernel: measure through SMLib's exact mass properties, checked against the mesh
- 07c36cfd0 bherbruck: solidcraft-smlib: Brep::chamfer_sides, and Error::Unsupported for a radius law with a corner
- ae1d746ae bherbruck: kernel: chamfers with two setbacks through SMLib
- a043e4ae2 bherbruck: kernel: an SMLib blend's corner patch comes from the edges meeting there
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8fde178fe Brennen Herbruck: kernel: any schema 4 record into SMLib with its order, healed where refused
- 5014c4f17 Brennen Herbruck: kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies
- 8ad09ec64 bherbruck: smlib export: a face's loop crosses its poles where the face's parameter box says
- f4da25243 bherbruck: solidcraft-smlib: the fork at bf7c272, whose operation results hold their own gaps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 96bdbbf3b bherbruck: docs: SMLib vs truck triage of the sweeps, threads and shell cases
- 82fe0e59e Brennen Herbruck: solidcraft-smlib: Brep::imprint
- 7e208529c Brennen Herbruck: solidcraft-step: each record face names its face in the file
- 863afb5e3 Brennen Herbruck: solidcraft-smlib: an arc past a full turn goes to SMLib a turn back
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- baae4ee19 jyviko: kernel: fillets and chamfers through SMLib when SOLIDCRAFT_KERNEL=smlib
- f73d40383 jyviko: kernel: an SMLib blend pick at a seam's end takes the sharp edge there
- 1d8299aed jyviko: kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 29d307bdc jyviko: doc: a modelled thread through SMLib cuts the exact groove
- 5dd3acdec Brennen Herbruck: kernel-cases: on the kernel branch a thread off its hole or shaft size is refused
- b900d6d46 jyviko: kernel: solids an SMLib boolean leaves touching come back as separate solids
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0f3d6f177 jyviko: kernel: shell, offset faces and thicken through SMLib, with SMLib's history
- 82865e283 jyviko: kernel: a body SMLib walks some loops of the other way keeps its order
- 6bfbe1041 jyviko: kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d672cfa01 jyviko: kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation
- f35f06d98 jyviko: kernel: a revolution that is no analytic surface goes into SMLib as its B-spline
- a6ca4e0dd jyviko: AGENTS.md: one switch, SOLIDCRAFT_KERNEL, in place of the booleans-only note
- 51211ad1f jyviko: solidcraft-smlib: offset faces, thicken, and NoRoom for walls with no room
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e35b4d744 jyviko: kernel: revolutions of a line square to the axis go into SMLib as planes
- 00e43aacc jyviko: kernel: an operand SMLib's check refuses goes through SMLib's healer
- 94c159825 jyviko: kernel: SMLib's round faces decode as truck's own revolutions are laid out
- ff0f7ccfa jyviko: kernel: a body's record for SMLib takes a larger tolerance where an edge needs it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b27751d43 jyviko: kernel: planes go into SMLib as its planes; analytic angles start at zero
- 640d3d9ea jyviko: kernel: truck's extruded circles go into SMLib as its cylinders
- 1980f9743 jyviko: kernel: SMLib's export keeps every face of a void's shell
- c344801cc jyviko: kernel: note that the engine's and CLI's `smlib` features reach SOLIDCRAFT_BOOLEANS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5238840bc jyviko: kernel: booleans through SMLib behind SOLIDCRAFT_BOOLEANS, with SMLib's history
- d271add1a jyviko: kernel: revolutions go into SMLib as its cylinders, cones, spheres and tori
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c992630e1 bherbruck: ATTRIBUTION.md: rows for the kernel rig's STEP import fixtures
- b90a5851c jyviko: kernel: open a half sphere's loop at its pole, so its seam closes
- 54542890d jyviko: kernel: hold every display-plan triangle to the chord tolerance
- f7336497f jyviko: AGENTS.md: the kernel does geometry, sugar lives above it
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 201ca9a81 Brennen Herbruck: smlib tests: score SMLib's GlobalSurfaceIntersect on the SSI corpus
- f8b48d0e4 Brennen Herbruck: smlib: pin the fork at 70e1bf5 (capi: surface/surface intersection)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17eafa2d4 Brennen Herbruck: solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
- 1edeb2a6f Brennen Herbruck: tests: SSI corpus fixtures (119 cases with exact truth)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 58ce14f45 bherbruck: kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
- e809edd33 Brennen Herbruck: kernel-cases: thread cases that are slow by nature get 600 s
- 8cb976b9b bherbruck: kernel-cases: watertight checks the display mesh, welding vertices by distance
- 3feb9ba2c Brennen Herbruck: kernel-cases: tessellation cases from mesh-hole reports grade watertightness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 35ebc816b jyviko: kernel-cases: a missing capability's message is the case's own text
- 248fee75b jyviko: ladder: every ladder run measures one case at a time
- e1575385b Brennen Herbruck: kernel-cases: a thread off its hole or shaft size is refused
- d7381a1fa bherbruck: kernel-cases: threads fit a hole or shaft off the thread's size again
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75aa8acb6 Brennen Herbruck: kernel-cases: sweeps skipped sources (72)
- 678a70da2 bherbruck: kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- c24b066d2 bherbruck: kernel-cases: an outcome for geometry with no single manifold answer
- 8764a76ff Brennen Herbruck: kernel-cases: threads cases from #1995 and #3368 (finely faceted booleans), skipped #987#3130#3824
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a9002968f Brennen Herbruck: kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e71db662 Brennen Herbruck: kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739524a17 Brennen Herbruck: kernel-cases: sweeps lofts from #271-#3412 (zig-zag pairing, ring sections, flush joins and cuts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce201eea1 jyviko: kernel: SMLib spheres cut by a boolean decode oriented and meshed
- 62142ef38 jyviko: brep: a revolution of a closed profile is periodic along it
- 62124a711 jyviko: kernel: spline edges on part of their curve load as that piece
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a7c0109ea Brennen Herbruck: kernel: boolean runner grades the seeds against a reference volume
- 7bb74d1c6 bherbruck: kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ac6ddbdbe jyviko: kernel: boolean runner times both kernels and runs the cut sequence
- 79ae117dd jyviko: kernel: boolean runner measures SMLib's results again on truck
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 27e996c44 jyviko: brep: splines closed on themselves are periodic for pcurves and tessellation
- 204b650d9 jyviko: brep: check_geometry refuses loops that enclose no area or turn the wrong way
- 19cf3d94a jyviko: brep: orientation, not position, tells a face's outer loop
- 2196129f1 jyviko: kernel: side-by-side boolean runner calls SMLib's boolean
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5b8d89abd Brennen Herbruck: kernel: schema 4 STEP records of revolved and conic-bounded parts against closed-form volumes
- c35fd77f6 jyviko: solidcraft-smlib: rebuild SMLib when its own sources change
- 734883bdb jyviko: solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d41ae8512 Brennen Herbruck: solidcraft-step: surfaces of revolution and extrusion, offset surfaces, hyperbola and parabola edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0bad4161 bherbruck: solidcraft-smlib: check test on every primitive
- 7050e9cfc bherbruck: solidcraft-smlib: mass properties of every primitive against closed forms
- 4983b8872 Brennen Herbruck: kernel: the boolean runner builds every SMLib operand
- acff340a0 Brennen Herbruck: solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 161832976 jyviko: AGENTS.md: unsafe in the SMLib FFI module and its child modules
- 25d2056a2 jyviko: brep: a seam from pole to pole gets pcurves a period apart
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b85b51e81 Brennen Herbruck: solidcraft-smlib: blend faces come from the edge they replace
- 4a6494b48 jyviko: brep: check_geometry, the geometric agreement of a record
- 570028f31 jyviko: brep: the truck adapter checks a record's geometry before decoding it
- 30f5e617c jyviko: brep: document check_geometry in the validation section
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd80377dd Brennen Herbruck: solidcraft-smlib: face and edge history out of SMLib operations
- 4a4e11ef7 Brennen Herbruck: kernel: a side-by-side runner for truck and SMLib booleans
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60aa5e697 jyviko: solidcraft-smlib: build every C API source file
- 3c0b53935 jyviko: solidcraft-smlib: read SMLib's log lines inside the FFI module
- 858f2c3bd jyviko: solidcraft-smlib: the C types are imported only when SMLib is built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 692fba51a jyviko: naming: say how to re-record the corpus names
- a8c8f8832 jyviko: naming: list removed lines before added ones in the corpus diff
- 1d4916008 jyviko: brep: a surface point's parameters move to geom
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 099026d94 jyviko: kernel: fitted pcurves on curved surfaces, unwrapped and closed per wire
- c7088fac9 jyviko: kernel: pcurve tests for seams, poles and loop orientation, and pictures
- 0d026e975 jyviko: kernel: pcurve fits start from four samples per span
- 4afbe3b90 jyviko: kernel: pcurve test for a face round its surface without a seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7024ceec8 jyviko: CI: no runs for pull requests into kernel-smlib for now
- 92d433ca9 jyviko: AGENTS.md: the kernel-smlib branch's rules (ADR 0002)
- ee5deffaa jyviko: brep: Curve2 pcurve type and the truck pcurve entry point
- 26ab8981d jyviko: kernel: exact pcurves of lines and splines on planes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Orbiting about the point under the cursor (or the origin) turned the camera
about its target and then panned to put the pivot back. The pan works at the
target's depth with the parallel-view scale, so in a perspective view the
pivot slid off its pixel and the model swung about the camera.
The camera now turns rigidly about the pivot: Camera::orbit_about keeps the
pivot's coordinates in the camera's frame and rebuilds the target from the
new orientation, so the pivot stays exactly on its pixel in both projections.
The Shift snap spring and view.navigate's pivot orbit use the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit e88779218)
#2142 made orbiting about the point under the cursor turn the camera in place instead of turning the part about that point. Restore the 0.15.0 behaviour.
This reverts commit cac4bccea8.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
npm puts a Unix shell script with the bare name (codex-acp,
claude-code-acp, gemini) beside the .cmd shim. The lookup tried the bare
name first, so every npm-installed agent failed with "not a valid Win32
application (os error 193)". Windows now only considers .exe/.cmd/.bat,
and a command saved with the bare path runs the shim beside it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 60ea8c69d2)
On 32-bit Windows SetWindowLongPtrW is SetWindowLongW, which takes and
returns i32, so the window-procedure hook didn't compile for i686.
The macOS app bundle now signs the bundled solidcraft-cli before the
bundle itself; codesign refuses a bundle with an unsigned helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 94e76cd97e)
* Windows: start Direct3D 12 first, and Vulkan only without a D3D12 GPU
wgpu started Vulkan, D3D12 and OpenGL together and preferred Vulkan, so
every Windows start loaded all installed Vulkan drivers. An old Intel
Vulkan driver (igvk64.dll) crashed 0.10.1 at startup inside the driver.
The app now probes D3D12, then Vulkan, then OpenGL, one backend at a
time, and starts only the first with a hardware adapter (WARP when none
has one). WGPU_BACKEND still wins; graphics.json's "backend" sets the
order by hand; the software renderer (safe mode, the retry) uses D3D12
alone. A new Windows CI job starts the real app under several settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: a test filter YAML parses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the startup smoke test writes graphics.json where the app reads it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: run the WARP shader tests one at a time
WARP's shader JIT (d3d10warp.dll) crashed twice in 124 runs of the gpu
tests with four test threads, with a null read inside its own optimizer
while several devices compiled compute pipelines at once. Serial runs
did not crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 95ea05e7c8)
* GPU tessellation: a pipeline the device cannot build falls back to CPU meshing instead of crashing (#1098)
Build the tessellation compute pipeline inside error scopes; TessGpu::new returns an error,
and the viewport logs it and meshes bodies on the CPU. A Windows CI job builds the pipeline
with D3D12's FXC on the WARP adapter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation shader: basis functions in one-dimensional local arrays, so D3D12's FXC compiles it (#1098)
FXC has to unroll loops that write an array inside a struct (Basis.n0/n1) or a 2-D array
(ndu) by a counter, and cannot with run-time trip counts (X3511). A2.2 basis functions in a
local 1-D array returned whole; derivatives from the degree p-1 functions; the pole step
offsets computed rather than indexed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Since the model's mesh went back to the reference mesher (#940), the GPU viewport drew
opaque bodies from their display plans while hover and selection lit faces with the
reference mesh's triangles. Two triangulations of the same face at equal depth fought, so
a hovered face shimmered in wedges instead of lighting whole.
Faces lit over a body drawn from its plan now use the plan's own triangles
(ModelBody::plan_mesh, evaluated once on the CPU), and the highlight pass gets a small
depth bias toward the eye so f32 rounding between the GPU and CPU evaluations of the same
triangles cannot speckle it either.
Test: every face of a box with a pocket and a round boss, hovered and rendered offscreen
through the viewport's real pipelines on the GPU path, lights the same pixels as on the
CPU path (skipped without a GPU adapter).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 12:56:47 +00:00
244 changed files with 18276 additions and 8610 deletions
@@ -771,6 +771,7 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| docs/design/preferences/figures/view-shadow.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| `assets/locales/pending/sketch-offset-instances.json` | SolidCraft contributors | Original offset instance-count label and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/settings_profile.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original analytic head and shoulder geometry for settings profiles | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4561-convert-box-mesh-with-a-zero-area-triangle/box-degenerate.stl | SolidCraft contributors | synthetic ASCII STL written by hand: a box with one zero-area triangle, for the kernel regression case of tangency-labs/solidcraft#4561 | MIT OR Apache-2.0 |
## Code adapted from sibling projects
@@ -810,6 +811,15 @@ in THIRD-PARTY-LICENSES.txt; no images or artwork from that project are copied.
The glTF test files are built by the tests themselves (crates/io/src/gltf_in_tests.rs,
crates/engine/src/tests/gltf_import.rs); no third-party models are committed.
## Geometry kernel crates
| Crate | Used for | Licence |
|---|---|---|
| solidcore (https://github.com/tangency-labs/solidcore, pinned by rev in Cargo.toml) | the Rust port of NVIDIA's SMLib: the B-rep kernel behind crates/smlib | Apache-2.0 (its NOTICE credits NVIDIA's USD BRep) |
Linked as a crate; no code from it is copied into SolidCraft. Its licence text and NOTICE go
into THIRD-PARTY-LICENSES.txt when `main` regenerates it.
## FreeCAD and Rhino import library
FreeCAD `.FCStd` and Rhino `.3dm` files are read with [cadmpeg](https://github.com/cadmpeg/cadmpeg)
@@ -825,6 +835,7 @@ copied into SolidCraft.
| SolidCraft file | Original contribution | Licence |
|---|---|---|
| crates/ui-egui/src/viewport.rs (`nearest_quarter_turn`, `axis_view_orbit`) | N3MI-DG's [PR #101](https://github.com/bherbruck/solidcraft/pull/101): [minimal TOP/BOTTOM turns](https://github.com/bherbruck/solidcraft/commit/c28e780f52490784ef5886f094b9d3f6d10c3e3f) and [drag-to-orbit](https://github.com/bherbruck/solidcraft/commit/f30b30be6ecc4e2e6544a851243137c01a354934), adapted to the axis gizmo | MIT OR Apache-2.0 |
| crates/smlib/src/core/offset.rs (`draft`: the tilted planes and `SmBrep::LocalOperation`, the tail of the capi's `draft_faces`) | ablasik's `draft` in `crates/smlib/src/ffi/rs_ops2.rs` on [ablasik/solidcraft `app/solidcore-backend-on-develop`](https://github.com/ablasik/solidcraft/blob/9c7e8e31565e1823f0591b58e2967351c32af13f/crates/smlib/src/ffi/rs_ops2.rs), adapted to `core::offset`'s errors and checks | MIT OR Apache-2.0 |
"crash.unclean_explanation":"اكتُشف عند تشغيل لاحق، ولم يُسجَّل وقت الخروج بدقة. قد يسبب إيقاف تشغيل النظام أو الإيقاف القسري خروجًا غير سليم أيضًا.",
"delete.and_more":"… و{count} غيرها",
"diagnostic.empty_boolean_component":"لا يوجد جسم للقص أو التقاطع في المكوّن '{component}'؛ قد تتداخل الأداة مع '{body}' في المكوّن '{other}' — نشّط ذلك المكوّن أو اختر الجسم هدفًا",
"diagnostic.reselect_reference":"{feature}: المرجع `{reference}` لم يعد موجودًا كما اختير؛ أعد اختياره",
"dialog.bodies_count":"{count} أجسام",
"dialog.clearance_invalid":"يجب أن يكون الخلوص طولًا قيمته 0 أو أكثر",
"file_load.stopping":"انتظار توقف العملية السابقة...",
"file_load.updating_links":"تحديث الروابط",
"file_load.waiting":"انتظار عملية الملف",
@@ -1719,6 +1734,7 @@
"help.timeline.delete":"يحذف الميزات المحددة من السجل، وحذف رسمٍ يحذف معه الميزات المبنية عليه. استخدمه لإزالة خطوة لم تعد مطلوبة.",
"help.timeline.dependents":"يسرد الميزات التي ستُحذف مع ميزة ما، وتلك التي ستفشل بدونها. استخدمه قبل حذف ميزة أو تغييرها.",
"help.timeline.play":"أعد تشغيل الميزات المتبقية واحدة تلو الأخرى، مع توقف لمدة نصف ثانية بعد كل إعادة بناء. شغّل هذا الأمر مرة أخرى أو اضغط Escape للإيقاف؛ ينتقل «الذهاب إلى النهاية» فورًا إلى النهاية.",
"help.version":"الإصدار {version}",
"help.view.apply":"يدير العرض إلى اتجاه قياسي مثل الأمامي أو العلوي أو الأيزومتري، أو إلى عرض مسمّى محفوظ. استخدمه للنظر إلى النموذج من زاوية ثابتة.",
"help.view.delete":"يحذف عرضًا مسمّى محفوظًا. لا يتغير النموذج.",
"help.view.fit":"يضبط التكبير ويُزيح العرض حتى يملأ النموذج كله أو التحديد منطقة العرض. استخدمه حين يخرج النموذج من مجال الرؤية.",
@@ -1806,6 +1822,27 @@
"home.start_hint":"أنشئ تصميمًا، أو افتح ملفًا حديثًا، أو استكشف مثالًا.",
"home.whats_new":"ما الجديد",
"home.yesterday":"أمس",
"import_report.details":"التفاصيل:",
"import_report.file_one":"كانت هناك مشكلة أخرى واحدة في الملف.",
"import_report.file_other":"كانت هناك {count} مشكلات أخرى في الملف.",
"import_report.hint":"قد يحل ذلك تصدير هذه الأجزاء مرة أخرى من البرنامج الذي أنشأها. يحتوي «نسخ رسالة التحذير» على التفاصيل.",
"import_report.left_out_one":"تعذّر إصلاح وجه واحد وهو مفقود.",
"import_report.left_out_other":"تعذّر إصلاح {count} أوجه وهي مفقودة.",
"import_report.needs_repair_one":"يحتاج جزء واحد إلى إصلاح قبل النمذجة عليه.",
"import_report.needs_repair_other":"تحتاج {count} أجزاء إلى إصلاح قبل النمذجة عليها.",
"import_report.not_imported_one":"تعذّر استيراد جزء واحد.",
"prefs.profile_name_hint":"اسم ملف التعريف، مثل: حاسوب محمول",
"prefs.profile_operations":"تحليل زمن العمليات",
"prefs.profile_operations_note":"يسجّل المدة التي تستغرقها استدعاءات SMLib وعمليات النواة والميزات والأوامر وعمليات الاستيراد. يقرؤه الوكلاء عبر diagnostics.profile.",
"prefs.profile_rename":"إعادة تسمية",
"prefs.profile_renamed":"تمت إعادة تسمية ملف التعريف.",
"prefs.profile_save":"حفظ",
@@ -2380,6 +2419,9 @@
"prefs.scale_text":"الحجم والنص",
"prefs.search":"البحث في الإعدادات",
"prefs.search_empty":"لا توجد إعدادات مطابقة",
"prefs.section_hatch":"تهشير المقطع",
"prefs.section_hatch_by_part":"حسب الجزء",
"prefs.section_hatch_one":"نمط واحد",
"prefs.select":"تحديد",
"prefs.select_one_item":"تحديد عنصر واحد",
"prefs.select_other_hidden":"تحديد العناصر الهندسية المخفية باستخدام «تحديد عنصر آخر»",
@@ -2494,6 +2536,12 @@
"prefs.under_cursor":"تحت المؤشر",
"prefs.units_precision":"الوحدات والدقة",
"prefs.updates":"التحديثات",
"prefs.validation":"التحقق من الأجسام",
"prefs.validation.each_feature":"مرة لكل ميزة",
"prefs.validation.each_step":"بعد كل خطوة",
"prefs.validation.label":"فحص النواة الكامل",
"prefs.validation.off":"متوقف (تجريبي)",
"prefs.validation_note":"بعد كل خطوة: يفحص كل عملية سحب ودمج وتقويس.\nمرة لكل ميزة: يفحص ناتج كل ميزة مرة واحدة.\nمتوقف (تجريبي): لا فحص.",
"prefs.value_boxes_in_view":"إظهار القيم بجانب مقابضها في العرض",
"prefs.value_boxes_in_view_tip":"قيمة الأمر (المسافة، نصف القطر…) في مربع بجانب مقبضه، فوق النموذج. عند الإيقاف: تكتبها في نافذة الأمر، التي تتلقى لوحة المفاتيح بعد التحديد، ولا شيء يغطي النموذج.",
"prefs.view":"سلوك العرض",
@@ -2528,6 +2576,17 @@
"recovery.just_now":"الآن",
"recovery.min_ago":"قبل {count} دقيقة",
"recovery.never_saved":"لم يُحفظ قط",
"refused.change":"تعذّر تغيير {body}.",
"refused.cut":"تعذّر قطع {body}.",
"refused.face_curved":"أحد أوجهه المنحنية لا يمكن استخدامه في النمذجة.",
"refused.face_flat":"أحد أوجهه المستوية لا يمكن استخدامه في النمذجة.",
"refused.face_freeform":"أحد أوجهه الحرة لا يمكن استخدامه في النمذجة.",
"refused.face_rounded":"أحد أوجهه المستديرة لا يمكن استخدامه في النمذجة.",
"refused.faces_apart":"أوجهه لا تلتقي بدقة كافية لاستخدامها في النمذجة.",
"render.adaptive_enable":"توزيع العيّنات باستخدام عيّنات استكشافية مستقلة",
@@ -3995,7 +4054,19 @@
"the section's profiles must be in one sketch":"يجب أن تكون مقاطع المقطع العرضي في رسم واحد",
"the two origins are on the same component":"يقع الأصلان على المكوّن نفسه",
"thread.automatic_size":"حجم تلقائي",
"thread.chamfer_depth_needed":"مطلوب لهذا الشكل",
"thread.designation":"التسمية",
"thread.drill_range":"مثقاب صانع اللقمة {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.drill_range_custom":"المثقاب هو القطر الأكبر ناقص الخطوة، {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.drill_range_taper":"مثقاب صانع اللقمة {drill} مم. القطر الأصغر القياسي عند نهاية السن {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"ui.export_keymap_tip":"المفاتيح ومفضلات مربع S وشريط الأدوات، كملف",
"ui.extend":"تمديد",
"ui.extent":"الامتداد",
"ui.extent_type":"نوع الامتداد",
"ui.extract_component":"استخراج إلى ملف…",
"ui.extract_design_changed":"تغيّر التصميم أثناء اختيار الملف. ابدأ الاستخراج إلى ملف من جديد.",
@@ -4673,11 +4766,39 @@
"ui.extrude_auto_to_object":"البثق إلى هدف مختار",
"ui.extrude_auto_to_object_tip":"في البثق، مع اختيار مقطع، يؤدي اختيار وجه أو رأس أو مستوى موازٍ خارج مستواه إلى تبديل الامتداد إلى «إلى كائن»",
"ui.factor":"المعامل",
"ui.fade":"تلاشٍ",
"ui.fade_length":"طول التلاشي",
"ui.feature_history":"سجل الميزات",
"ui.feature_options":"خيارات الميزة",
"ui.features":"الميزات",
"ui.file":"ملف",
"ui.fillet":"تقويس",
"ui.fillet_corner_ball":"كرة",
"ui.fillet_corner_ball_tip":"جزء من سطح الكرة المتدحرجة، مماسّ (G1) لكل تقويس.",
"ui.fillet_corner_curvature_tip":"الانحناء (G2): رقعة ناعمة. تُرجَع الزاوية على طول كل حافة بمقدار الإرجاع ({factor} ضعف نصف القطر ما لم تكتب قيمة) وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار.",
"ui.fillet_corner_needs_constant":"زوايا الرقعة الناعمة (G2) تتطلب نصف قطر ثابتًا وملاءمة دقيقة لنصف القطر.",
"ui.fillet_corner_patch":"رقعة ناعمة",
"ui.fillet_corner_patch_tip":"متصل الانحناء (G2): تُرجَع الزاوية على طول كل حافة وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار.",
"ui.fillet_corner_tangent_tip":"مماس (G1): زاوية بالكرة المتدحرجة، جزء من سطح الكرة المتدحرجة مماسّ لكل تقويس.",
"ui.fillet_error_corner":"تعذّر بناء الزاوية الناعمة هنا. جرّب مسافة إرجاع أخرى، أو زوايا مماسّة.",
"ui.fillet_error_failed":"تعذّر بناء هذا التقويس على هذه الحواف. جرّب نصف قطر آخر، أو قوّس حوافّ أقل في المرة الواحدة.",
"ui.fillet_error_setback_short":"مسافة الإرجاع قصيرة جدًا على رقعة هذه الزاوية: تُبنى ابتداءً من {least}. جرّب مسافة إرجاع أطول.",
"ui.fillet_error_too_large":"نصف القطر كبير جدًا على الوجوه المجاورة لهذه الحواف. جرّب نصف قطر أصغر، أو اختر في «حدود الوجوه» الخيار «أكبر نصف قطر».",
"ui.fillet_fit":"حدود الوجوه",
"ui.fillet_fit_exact":"نصف قطر دقيق",
"ui.fillet_fit_needs_constant":"ملاءمة نصف القطر تتطلب نصف قطر ثابتًا.",
"ui.fillet_fit_reduce":"أكبر نصف قطر",
"ui.fillet_fit_taper":"نصف قطر مُضيَّق",
"ui.fillet_fit_tip":"عندما يكون نصف القطر أكبر مما تسمح به الوجوه المجاورة للحافة.\nنصف قطر دقيق: نصف القطر كما هو، أو لا تقويس ورسالة توضّح السبب.\nأكبر نصف قطر: تُقوَّس كل حافة بأكبر نصف قطر يتّسع.\nنصف قطر مُضيَّق: يبقى نصف القطر، ويُضيَّق التقويس فقط حيث تنتهي الوجوه.",
"ui.fillet_options_tip":"سلسلة مماسّة: قوّس أيضًا الحواف التي تتصل بسلاسة بالحواف المختارة.\nمعاينة: اعرض النتيجة في العرض أثناء التحرير.",
"ui.fillet_setback":"مسافة الإرجاع",
"ui.fillet_setback_hint":"{factor} × نصف القطر",
"ui.fillet_setback_least":"أكثر من {least}",
"ui.fillet_setback_tip":"حيث تبدأ رقعة الزاوية الناعمة: المسافة على طول كل حافة من الزاوية. الافتراضي {factor} ضعف نصف القطر. يجب أن تكون أكبر من أقل مسافة إرجاع، حيث تلتقي الاستدارات بدونها: نصف القطر حيث تكون الأوجه متعامدة.",
"ui.fillet_type_choices_tip":"نصف قطر ثابت: نصف قطر واحد على طول الحافة.\nطول الوتر: يبقى عرض التقويس نفسه مهما كانت الزاوية بين الوجوه.\nنصف قطر متغيّر: نصف قطر عند كل طرف، ومزيد على طول الحافة إن أضفته.\nمتصل الانحناء: مقطع بلا انكسار في الانعكاسات حيث يلتقي بالوجوه المستوية (G2).\nمنحنى: يتبع نصف القطر على طول الحافة أنصاف أقطار تحكّم تحدّدها.",
"ui.fillet_type_curvature":"متصل الانحناء",
"ui.fillet_type_tip":"المقطع عبر الحافة. متصل الانحناء: مقطع متصل الانحناء (G2) بين وجوه مستوية، فتمر الانعكاسات من الوجوه إلى التقويس دون انكسار.",
"ui.filter_commands_or_keys":"تصفية الأوامر أو المفاتيح",
"ui.findInTimeline":"البحث في الخط الزمني",
"ui.findInWindow":"البحث في النافذة",
@@ -4827,6 +4948,7 @@
"ui.inspect":"فحص",
"ui.instances":"النسخ",
"ui.intersect":"تقاطع",
"ui.iso_4753":"ISO 4753",
"ui.isolate":"عزل",
"ui.join":"ضم",
"ui.joint_play":"▶ تشغيل",
@@ -4929,6 +5051,7 @@
"ui.part_size_needs_a_part":"حدد قطعة قياسية مُدرجة (برغي أو صامولة أو حلقة مسطحة أو مسمار) لتغيير مقاسها. لتكبير جسم أو تصغيره، استخدم «تحجيم».",
"ui.part_size_shared":"يعيد بناء القطعة مستبدلًا أي ميزات مضافة. تتحدث كل نسخ هذا المكوّن.",
"ui.paste":"لصق",
"ui.patch_continuity_corner_tip":"تلتقي الرقعة بالأوجه المحيطة بها بالاستمرارية المختارة على طول كل جانب. وعند زاوية تلتقي فيها تلك الأوجه بعضها ببعض بانحناءات مختلفة، تبقى مماسّة (G1) هناك.",
"ui.path":"المسار",
"ui.pattern_object_type_tip":"الأجسام: أشكال مصمتة تُختار في العرض أو في المستعرض؛ يُنسخ كل منها كاملًا.\nالميزات: خطوات في السجل، مثل بثق أو ثقب، تُختار في السجل أو على وجه صنعته؛ تتكرر الخطوة.\nالرسم ليس أيًّا منهما: كرّر منحنياته بأداة النمط أو المرآة داخل الرسم، أو ابثقه أولًا.",
"Report a bug — review a screenshot and open a GitHub draft":"Fehler melden — Screenshot prüfen und einen GitHub-Entwurf öffnen",
"Report copied. Keep this text to submit on GitHub when you are online.":"Bericht kopiert. Bewahren Sie diesen Text auf, um ihn auf GitHub einzureichen, sobald Sie online sind.",
"crash.unclean_explanation":"Beim späteren Start erkannt; der genaue Zeitpunkt des Beendens wurde nicht aufgezeichnet. Auch ein Herunterfahren des Systems oder ein erzwungener Stopp kann ein unsauberes Beenden verursachen.",
"delete.and_more":"… und {count} weitere",
"diagnostic.empty_boolean_component":"In Komponente '{component}' gibt es keinen Körper zum Abziehen oder für eine Schnittmenge; das Werkzeug überschneidet sich eventuell mit '{body}' in Komponente '{other}' – aktivieren Sie diese Komponente oder wählen Sie den Körper als Ziel",
"diagnostic.reselect_reference":"{feature}: Die Referenz `{reference}` existiert nicht mehr so, wie sie ausgewählt wurde; wählen Sie sie erneut aus",
"dialog.bodies_count":"{count} Körper",
"dialog.clearance_invalid":"der Abstand muss eine Länge von 0 oder mehr sein",
"dialog.compute":"Berechnen",
@@ -1421,6 +1427,14 @@
"file_load.reading_percent":"Datei wird gelesen... {percent} %",
"file_load.rebuilding":"Merkmal {done} von {total} wird neu aufgebaut",
"file_load.recovering":"Design wird wiederhergestellt",
"file_load.step_build":"Modell wird aufgebaut",
"file_load.step_feature":"Merkmal {done} von {total}",
"file_load.step_part":"Teil {done} von {total}",
"file_load.step_percent":"{percent} %",
"file_load.step_read":"Datei wird gelesen",
"file_load.step_rebuild":"Merkmale werden neu aufgebaut",
"file_load.step_repair":"Teile werden geprüft und repariert",
"file_load.step_show":"Ansicht wird vorbereitet",
"file_load.stopping":"Warten, bis der vorherige Vorgang beendet ist...",
"file_load.updating_links":"Verknüpfungen werden aktualisiert",
"file_load.waiting":"Warten auf Dateivorgang",
@@ -1802,6 +1816,27 @@
"home.start_hint":"Erstellen Sie einen Entwurf, öffnen Sie eine zuletzt verwendete Datei oder erkunden Sie ein Beispiel.",
"home.whats_new":"Neuigkeiten",
"home.yesterday":"Gestern",
"import_report.details":"Details:",
"import_report.file_one":"Die Datei hatte 1 weiteres Problem.",
"import_report.file_other":"Die Datei hatte {count} weitere Probleme.",
"import_report.hint":"Die Teile erneut aus dem Programm zu exportieren, mit dem sie erstellt wurden, kann das beheben. „Warnmeldung kopieren“ enthält die Details.",
"import_report.left_out_one":"1 Fläche konnte nicht repariert werden und fehlt.",
"import_report.left_out_other":"{count} Flächen konnten nicht repariert werden und fehlen.",
"import_report.needs_repair_one":"1 Teil muss repariert werden, bevor daran modelliert werden kann.",
"import_report.needs_repair_other":"{count} Teile müssen repariert werden, bevor daran modelliert werden kann.",
"import_report.not_imported_one":"1 Teil konnte nicht importiert werden.",
"import_report.not_imported_other":"{count} Teile konnten nicht importiert werden.",
"import_report.not_shown_one":"1 Fläche konnte nicht gezeichnet werden und ist ausgeblendet.",
"import_report.not_shown_other":"{count} Flächen konnten nicht gezeichnet werden und sind ausgeblendet.",
"import_report.open_one":"1 Teil hat Lücken zwischen seinen Flächen und kam als offener Körper herein.",
"import_report.open_other":"{count} Teile haben Lücken zwischen ihren Flächen und kamen als offene Körper herein.",
"import_report.refused_one":"1 Teil konnte nicht zu einem Volumenkörper werden und wurde nicht importiert.",
"import_report.refused_other":"{count} Teile konnten nicht zu Volumenkörpern werden und wurden nicht importiert.",
"import_report.repaired_one":"Kleine Fehler wurden an 1 Teil repariert.",
"import_report.repaired_other":"Kleine Fehler wurden an {count} Teilen repariert.",
"import_report.solids":"{solids} von {parts} Teilen als Volumenkörper importiert.",
"import_report.surfaces_one":"1 Teil konnte nicht zu einem Volumenkörper werden und kam als Flächen herein.",
"import_report.surfaces_other":"{count} Teile konnten nicht zu Volumenkörpern werden und kamen als Flächen herein.",
"install.button_tip":"SolidCraft als App installieren: eigenes Fenster, funktioniert auch offline",
"install.dock_1":"Wählen Sie Ablage › Zum Dock hinzufügen.",
"install.dock_2":"Klicken Sie auf „Hinzufügen“.",
@@ -2334,6 +2369,8 @@
"prefs.profile_exported":"Profil exportiert.",
"prefs.profile_imported":"Profil importiert.",
"prefs.profile_name_hint":"Profilname, z. B. Laptop",
"prefs.profile_operations_note":"Zeichnet auf, wie lange SMLib-Aufrufe, Kernel-Vorgänge, Features, Befehle und Importe dauern. Agenten lesen es mit diagnostics.profile.",
"prefs.profile_rename":"Umbenennen",
"prefs.profile_renamed":"Profil umbenannt.",
"prefs.profile_save":"Speichern",
@@ -2477,6 +2514,12 @@
"prefs.under_cursor":"Unter dem Cursor",
"prefs.units_precision":"Einheiten und Genauigkeit",
"prefs.updates":"Updates",
"prefs.validation":"Körperprüfung",
"prefs.validation.each_feature":"Einmal je Feature",
"prefs.validation_note":"Nach jedem Schritt: prüft jeden Sweep, jede Boolesche Operation und jede Rundung.\nEinmal je Feature: prüft das Ergebnis jedes Features einmal.\nAus (experimentell): keine Prüfung.",
"prefs.value_boxes_in_view":"Werte in der Ansicht neben ihren Griffen zeigen",
"prefs.value_boxes_in_view_tip":"Der Wert eines Befehls (Abstand, Radius …) in einem Feld neben seinem Griff, über dem Modell. Aus: Sie geben ihn im Befehlsfenster ein, das nach einer Auswahl die Tastatur erhält, und nichts verdeckt das Modell.",
"prefs.view":"Ansichtsverhalten",
@@ -2511,6 +2554,17 @@
"recovery.just_now":"gerade eben",
"recovery.min_ago":"vor {count} Min.",
"recovery.never_saved":"nie gespeichert",
"refused.change":"{body} konnte nicht geändert werden.",
"refused.cut":"{body} konnte nicht geschnitten werden.",
"refused.face_curved":"Eine seiner gekrümmten Flächen kann nicht zum Modellieren verwendet werden.",
"refused.face_flat":"Eine seiner ebenen Flächen kann nicht zum Modellieren verwendet werden.",
"refused.face_freeform":"Eine seiner Freiformflächen kann nicht zum Modellieren verwendet werden.",
"refused.face_rounded":"Eine seiner gerundeten Flächen kann nicht zum Modellieren verwendet werden.",
"refused.faces_apart":"Seine Flächen treffen nicht genau genug aufeinander, um damit zu modellieren.",
"refused.intersect":"Schnittmenge mit {body} nicht möglich.",
"refused.join":"Konnte nicht mit {body} vereinigt werden.",
"the section's profiles must be in one sketch":"die Profile des Querschnitts müssen in einer Skizze liegen",
"the two origins are on the same component":"die beiden Ursprünge liegen auf derselben Komponente",
"thread.automatic_size":"Automatische Größe",
"thread.chamfer_depth_needed":"für diese Form erforderlich",
"thread.designation":"Bezeichnung",
"thread.drill_range":"Der Bohrer des Gewindebohrerherstellers ist {drill} mm. Der genormte Kerndurchmesser des Innengewindes ist {minor} mm. Ein Bohrer von {low} bis {high} mm wird angenommen.",
"thread.drill_range_custom":"Der Bohrer ist der Nenndurchmesser minus Steigung, {drill} mm. Der genormte Kerndurchmesser des Innengewindes ist {minor} mm. Ein Bohrer von {low} bis {high} mm wird angenommen.",
"thread.drill_range_taper":"Der Bohrer des Gewindebohrerherstellers ist {drill} mm. Der genormte Kerndurchmesser am Gewindeende ist {minor} mm. Ein Bohrer von {low} bis {high} mm wird angenommen.",
"thread.end_square":"Rechtwinklig",
"thread.fade_short":"1,25 P (ISO 3508)",
"thread.fade_standard":"2,5 P (ISO 3508)",
"thread.form_bspp":"Rohrgewinde G (ISO 228-1)",
"thread.form_bspt":"Kegeliges Rohrgewinde R, Rc (ISO 7-1)",
"thread.form_rp":"Zylindrisches Innenrohrgewinde Rp (ISO 7-1)",
"thread.iso_metric":"ISO metrisch",
"thread.select_size":"Größe wählen",
"timeline.delete_after_marker_one":"1 Merkmal nach der Verlaufsmarkierung löschen",
@@ -4481,6 +4546,10 @@
"ui.colour_vision_sample":"Beispiel",
"ui.colour_vision_tritan":"Tritan",
"ui.colour_vision_tritan_tip":"Bei schwachem oder fehlendem Blausinn",
"ui.comb_length":"Kammlänge",
"ui.comb_length_tip":"Wie lang die Zähne sind: ein Vielfaches der automatischen Länge, bei der der längste Zahn ein Fünftel der Größe der gezeigten Kurven ist.",
"ui.comb_teeth":"Zähne",
"ui.comb_teeth_tip":"Wie viele Zähne jeder Kamm hat, gleichmäßig entlang der Kurve verteilt. Mehr Zähne zeigen genauer, wie sich die Krümmung ändert.",
"ui.combine":"Kombinieren",
"ui.coming_later":"bald verfügbar",
"ui.command_done":"{command} fertig",
@@ -4505,11 +4574,24 @@
"ui.construction.ribbon_label":"Hilfslinien",
"ui.construction.side_hint":"Konstruktionslinie: die Seite anklicken, zu der die Linie läuft; Rechtsklick beginnt neu",
"ui.continuity_smooth_curvature_change_tip":"Glatte Krümmungsänderung (G4): Selbst die Art, wie sich die Krümmung ändert, läuft an der Naht glatt weiter.",
"ui.continuity_tangent":"Tangential",
"ui.continuity_tangent_tip":"Tangential (G1): kein Knick, aber die Krümmung springt an der Naht.",
"ui.copy":"Kopieren",
"ui.copy_details":"Details kopieren",
"ui.copy_details_tip":"Die vollständige Meldung kopieren, um sie nachzuschlagen oder zu melden.",
"ui.edit_sketch_empty":"Keine Skizzen zum Bearbeiten",
"ui.ellipse":"Ellipse",
"ui.emboss_wrap_note":"Senkrechte Linienprofile, die einen unterstützten Zylinder berühren, werden automatisch aufgewickelt. Eine Wand auswählen, um ein Ziel festzulegen.",
"ui.end":"Ende",
"ui.end_radius":"Endradius",
"ui.end_scale":"Endskalierung",
"ui.entities":"Elemente",
@@ -4656,11 +4739,39 @@
"ui.extrude_auto_to_object":"Bis zu einem gewählten Ziel extrudieren",
"ui.extrude_auto_to_object_tip":"Wenn in „Extrudieren“ ein Profil gewählt ist, schaltet das Wählen einer Fläche, eines Eckpunkts oder einer parallelen Ebene außerhalb der Profilebene die Ausdehnung auf „Bis Objekt“ um",
"ui.factor":"Faktor",
"ui.fade":"Auslauf",
"ui.fade_length":"Auslauflänge",
"ui.feature_history":"Feature-Verlauf",
"ui.feature_options":"Funktionsoptionen",
"ui.features":"Funktionen",
"ui.file":"Datei",
"ui.fillet":"Vollrundung",
"ui.fillet_corner_ball":"Kugel",
"ui.fillet_corner_ball_tip":"Ein Stück der Kugel des rollenden Balls, tangential (G1) zu jeder Rundung.",
"ui.fillet_corner_curvature_tip":"Krümmung (G2): ein glattes Flächenstück. Die Ecke wird entlang jeder Kante um den Rücksprung zurückgesetzt ({factor} × der Radius, sofern Sie keinen eingeben) und mit einem Flächenstück gefüllt, sodass Spiegelungen ohne Knick hindurchlaufen.",
"ui.fillet_corner_needs_constant":"Ecken mit glattem Flächenstück (G2) brauchen einen konstanten Radius und exakte Radiusanpassung.",
"ui.fillet_corner_patch":"Glattes Flächenstück",
"ui.fillet_corner_patch_tip":"Krümmungsstetig (G2): Die Ecke wird entlang jeder Kante zurückgesetzt und mit einem Flächenstück gefüllt, sodass Spiegelungen ohne Knick hindurchlaufen.",
"ui.fillet_corner_tangent_tip":"Tangential (G1): eine Kugelecke, ein Stück der Kugel des rollenden Balls, tangential zu jeder Rundung.",
"ui.fillet_error_corner":"Die glatte Ecke ließ sich hier nicht bauen. Versuchen Sie einen anderen Rücksprung oder tangentiale Ecken.",
"ui.fillet_error_failed":"Diese Rundung ließ sich an diesen Kanten nicht bauen. Versuchen Sie einen anderen Radius oder runden Sie weniger Kanten auf einmal.",
"ui.fillet_error_setback_short":"Der Rücksprung ist für das Eckstück zu kurz: Es lässt sich ab {least} bauen. Versuchen Sie einen längeren Rücksprung.",
"ui.fillet_error_too_large":"Der Radius ist zu groß für die Flächen neben diesen Kanten. Versuchen Sie einen kleineren Radius oder stellen Sie „Flächengrenzen“ auf „Größter Radius“.",
"ui.fillet_fit":"Flächengrenzen",
"ui.fillet_fit_exact":"Exakter Radius",
"ui.fillet_fit_needs_constant":"Radiusanpassung braucht einen konstanten Radius.",
"ui.fillet_fit_reduce":"Größter Radius",
"ui.fillet_fit_taper":"Verjüngter Radius",
"ui.fillet_fit_tip":"Wenn der Radius größer ist, als die Flächen neben einer Kante zulassen.\nExakter Radius: der angegebene Radius, oder keine Rundung und eine Meldung mit dem Grund.\nGrößter Radius: jede Kante mit dem größten passenden Radius gerundet.\nVerjüngter Radius: der Radius bleibt, die Rundung wird nur dort verjüngt, wo die Flächen enden.",
"ui.fillet_options_tip":"Tangentenkette: auch die Kanten runden, die glatt an die gewählten anschließen.\nVorschau: das Ergebnis beim Bearbeiten in der Ansicht zeigen.",
"ui.fillet_setback":"Rücksprung",
"ui.fillet_setback_hint":"{factor} × Radius",
"ui.fillet_setback_least":"Mehr als {least}",
"ui.fillet_setback_tip":"Wo das glatte Eckflächenstück beginnt: wie weit von der Ecke entlang jeder Kante. Standard ist {factor} × der Radius. Er muss größer sein als der kleinste Rücksprung, wo sich die Rundungen ohne ihn treffen: der Radius, wo die Flächen rechtwinklig zueinander stehen.",
"ui.fillet_smooth_radius":"Radius glatt ändern",
"ui.fillet_type_choices_tip":"Konstanter Radius: ein Radius entlang der ganzen Kante.\nSehnenlänge: die Breite der Rundung bleibt gleich, in welchem Winkel die Flächen auch aufeinandertreffen.\nVariabler Radius: ein Radius an jedem Ende und weitere entlang der Kante, wenn Sie sie hinzufügen.\nKrümmungsstetig: ein Querschnitt ohne Knick in den Spiegelungen, wo er auf ebene Flächen trifft (G2).\nSpline: der Radius entlang der Kante folgt Steuerradien, die Sie festlegen.",
"ui.fillet_type_curvature":"Krümmungsstetig",
"ui.fillet_type_tip":"Der Querschnitt über die Kante. Krümmungsstetig: ein krümmungsstetiger Querschnitt (G2) zwischen ebenen Flächen, sodass Spiegelungen ohne Knick von den Flächen in die Rundung laufen.",
"ui.filter_commands_or_keys":"Befehle oder Tasten filtern",
"ui.findInTimeline":"In der Zeitleiste suchen",
"ui.findInWindow":"Im Fenster suchen",
@@ -4909,6 +5020,7 @@
"ui.part_size_needs_a_part":"Wählen Sie ein eingefügtes Standardbauteil (Schraube, Mutter, Scheibe oder Stift) aus, um seine Größe zu ändern. Einen Körper vergrößern oder verkleinern Sie mit Skalieren.",
"ui.part_size_shared":"Baut das Teil neu auf und ersetzt alle hinzugefügten Merkmale. Alle Vorkommen dieser Komponente werden aktualisiert.",
"ui.paste":"Einfügen",
"ui.patch_continuity_corner_tip":"Der Patch schließt entlang jeder Seite mit der gewählten Stetigkeit an die umgebenden Flächen an. An einer Ecke, an der diese Flächen mit unterschiedlicher Krümmung aufeinandertreffen, bleibt er dort tangential (G1).",
"ui.path":"Pfad",
"ui.pattern_object_type_tip":"Körper: feste Formen, in der Ansicht oder im Browser gewählt; jeder wird ganz kopiert.\nFunktionen: Schritte im Verlauf, etwa eine Extrusion oder eine Bohrung, im Verlauf oder auf einer von ihnen erzeugten Fläche gewählt; der Schritt wird wiederholt.\nEine Skizze ist keines von beiden: Ihre Kurven mit Muster oder Spiegeln in der Skizze wiederholen oder sie zuerst extrudieren.",
"crash.unclean_explanation":"Detected on a later launch; the exact exit time was not recorded. A system shutdown or forced stop can also cause an unclean exit.",
"delete.and_more":"… and {count} more",
"diagnostic.empty_boolean_component":"there is no body to cut or intersect in component '{component}'; the tool may overlap '{body}' in component '{other}' — activate that component or pick the body as a target",
"diagnostic.reselect_reference":"{feature}: the reference `{reference}` no longer exists as it was picked; reselect it",
"dialog.bodies_count":"{count} bodies",
"dialog.clearance_invalid":"the clearance must be a length of 0 or more",
"dialog.compute":"Compute",
@@ -1425,6 +1432,14 @@
"file_load.reading_percent":"Reading the file... {percent}%",
"file_load.rebuilding":"Rebuilding feature {done} of {total}",
"file_load.recovering":"Recovering design",
"file_load.step_build":"Building the model",
"file_load.step_feature":"Feature {done} of {total}",
"file_load.step_part":"Part {done} of {total}",
"file_load.step_percent":"{percent}%",
"file_load.step_read":"Reading the file",
"file_load.step_rebuild":"Rebuilding the features",
"file_load.step_repair":"Checking and repairing the parts",
"file_load.step_show":"Preparing the view",
"file_load.stopping":"Waiting for the previous operation to stop...",
"file_load.updating_links":"Updating links",
"file_load.waiting":"Waiting for file operation",
@@ -1719,6 +1734,7 @@
"help.timeline.delete":"Deletes the selected features from the timeline; deleting a sketch also deletes the features built from it. Use it to remove a step that is no longer wanted.",
"help.timeline.dependents":"Lists the features that would be deleted with a feature, and those that would fail without it. Use it before deleting or changing a feature.",
"help.timeline.play":"Replay the remaining features one at a time, with a half-second pause after each rebuild. Run this command again or press Escape to stop; Go to end jumps immediately.",
"help.version":"Version {version}",
"help.view.apply":"Turns the view to a standard direction such as front, top or iso, or to a saved named view. Use it to look at the model from a fixed angle.",
"help.view.delete":"Deletes a saved named view. The model is not changed.",
"help.view.fit":"Zooms and pans so the whole model, or the selection, fills the view. Use it when the model has gone out of sight.",
@@ -1806,6 +1822,27 @@
"home.start_hint":"Create a design, open a recent file, or explore a sample.",
"home.whats_new":"What's new",
"home.yesterday":"Yesterday",
"import_report.details":"Details:",
"import_report.file_one":"There was 1 other problem with the file.",
"import_report.file_other":"There were {count} other problems with the file.",
"import_report.hint":"Exporting these parts again from the program that made them may fix this. Copy Warning Message has the details.",
"import_report.left_out_one":"1 face couldn't be repaired and is missing.",
"import_report.left_out_other":"{count} faces couldn't be repaired and are missing.",
"import_report.needs_repair_one":"1 part needs repair before it can be modelled on.",
"import_report.needs_repair_other":"{count} parts need repair before they can be modelled on.",
"import_report.not_imported_one":"1 part couldn't be imported.",
"import_report.not_imported_other":"{count} parts couldn't be imported.",
"import_report.not_shown_one":"1 face couldn't be drawn and is hidden.",
"import_report.not_shown_other":"{count} faces couldn't be drawn and are hidden.",
"import_report.open_one":"1 part has gaps between its faces and came in as an open body.",
"import_report.open_other":"{count} parts have gaps between their faces and came in as open bodies.",
"import_report.refused_one":"1 part couldn't be made into a solid and was not imported.",
"import_report.refused_other":"{count} parts couldn't be made into solids and were not imported.",
"import_report.repaired_one":"Small flaws were repaired in 1 part.",
"import_report.repaired_other":"Small flaws were repaired in {count} parts.",
"import_report.solids":"Imported {solids} of {parts} parts as solids.",
"import_report.surfaces_one":"1 part couldn't be made into a solid and came in as surfaces.",
"import_report.surfaces_other":"{count} parts couldn't be made into solids and came in as surfaces.",
"install.button_tip":"Install SolidCraft as an app: it opens in its own window and works offline",
"install.dock_1":"Choose File › Add to Dock.",
"install.dock_2":"Click Add.",
@@ -2351,6 +2388,8 @@
"prefs.profile_exported":"Profile exported.",
"prefs.profile_imported":"Profile imported.",
"prefs.profile_name_hint":"Profile name, e.g. Laptop",
"prefs.profile_operations":"Profile operations",
"prefs.profile_operations_note":"Records how long SMLib calls, kernel operations, features, commands and imports take. Agents read it with diagnostics.profile.",
"prefs.profile_rename":"Rename",
"prefs.profile_renamed":"Profile renamed.",
"prefs.profile_save":"Save",
@@ -2380,6 +2419,9 @@
"prefs.scale_text":"Scale and text",
"prefs.search":"Search preferences",
"prefs.search_empty":"No matching preferences",
"prefs.section_hatch":"Section hatch",
"prefs.section_hatch_by_part":"By part",
"prefs.section_hatch_one":"One style",
"prefs.select":"Select",
"prefs.select_one_item":"Select one item",
"prefs.select_other_hidden":"Select hidden geometry with Select Other",
@@ -2494,6 +2536,12 @@
"prefs.under_cursor":"Under cursor",
"prefs.units_precision":"Units and precision",
"prefs.updates":"Updates",
"prefs.validation":"Body check",
"prefs.validation.each_feature":"Once per feature",
"prefs.validation.each_step":"After every step",
"prefs.validation.label":"Full kernel check",
"prefs.validation.off":"Off (experimental)",
"prefs.validation_note":"After every step: checks each sweep, boolean and blend.\nOnce per feature: checks each feature's result once.\nOff (experimental): no check.",
"prefs.value_boxes_in_view":"Show values beside their handles in the view",
"prefs.value_boxes_in_view_tip":"A command's value (Distance, Radius…) in a box next to its handle, over the model. Off: you type it in the command window, which takes the keyboard after a pick, and nothing covers the model.",
"prefs.view":"View behavior",
@@ -2528,6 +2576,17 @@
"recovery.just_now":"just now",
"recovery.min_ago":"{count} min ago",
"recovery.never_saved":"never saved",
"refused.change":"Couldn't change {body}.",
"refused.cut":"Couldn't cut {body}.",
"refused.face_curved":"One of its curved faces can't be used for modelling.",
"refused.face_flat":"One of its flat faces can't be used for modelling.",
"refused.face_freeform":"One of its freeform faces can't be used for modelling.",
"refused.face_rounded":"One of its rounded faces can't be used for modelling.",
"refused.faces_apart":"Its faces don't meet closely enough to be used for modelling.",
"refused.intersect":"Couldn't intersect with {body}.",
"render.adaptive_enable":"Allocate samples with independent pilots",
@@ -3995,7 +4054,19 @@
"the section's profiles must be in one sketch":"the section's profiles must be in one sketch",
"the two origins are on the same component":"the two origins are on the same component",
"thread.automatic_size":"Automatic size",
"thread.chamfer_depth_needed":"required for this form",
"thread.designation":"Designation",
"thread.drill_range":"The tap maker's drill is {drill} mm. The internal thread's standard minor diameter is {minor} mm. A drill from {low} to {high} mm is accepted.",
"thread.drill_range_custom":"The drill is the major diameter less the pitch, {drill} mm. The internal thread's standard minor diameter is {minor} mm. A drill from {low} to {high} mm is accepted.",
"thread.drill_range_taper":"The tap maker's drill is {drill} mm. The standard's minor diameter where the thread ends is {minor} mm. A drill from {low} to {high} mm is accepted.",
"thread.end_square":"Square",
"thread.fade_short":"1.25 P (ISO 3508)",
"thread.fade_standard":"2.5 P (ISO 3508)",
"thread.fits_the_face":"fits the face, e.g. {example}",
"timeline.delete_after_marker_one":"Delete 1 Feature After History Marker",
@@ -4468,6 +4539,8 @@
"ui.centerline":"Centerline",
"ui.chain":"Chain",
"ui.chamfer":"Chamfer",
"ui.chamfer_angle":"Chamfer Angle",
"ui.chamfer_depth":"Chamfer Depth",
"ui.chamfer_type":"Chamfer Type",
"ui.change_workspace":"Change workspace",
"ui.circle":"Circle",
@@ -4498,6 +4571,10 @@
"ui.colour_vision_sample":"Sample",
"ui.colour_vision_tritan":"Tritan",
"ui.colour_vision_tritan_tip":"For a weak or missing blue sense",
"ui.comb_length":"Comb length",
"ui.comb_length_tip":"How long the teeth are: a multiple of the automatic length, which makes the longest tooth a fifth of the size of the curves shown.",
"ui.comb_teeth":"Teeth",
"ui.comb_teeth_tip":"How many teeth each comb has, evenly spaced along the curve. More teeth show more detail of how the curvature changes.",
"ui.combine":"Combine",
"ui.coming_later":"coming later",
"ui.command_done":"{command} done",
@@ -4522,11 +4599,24 @@
"ui.construction.ribbon_label":"X-Lines",
"ui.construction.side_hint":"Construction line: click the side the line runs towards; right-click to restart",
"ui.emboss_wrap_note":"Orthogonal line profiles tangent to one supported cylinder wrap automatically. Pick a wall to choose a target.",
"ui.end":"End",
"ui.end_radius":"End Radius",
"ui.end_scale":"End Scale",
"ui.ends":"Ends",
"ui.entities":"Entities",
"ui.equal":"Equal",
"ui.equation_end":"End",
@@ -4665,6 +4757,7 @@
"ui.export_ellipsis_keymap":"Export…",
"ui.export_keymap_tip":"Keys, S box favorites and the toolbar, as a file",
"ui.extend":"Extend",
"ui.extent":"Extent",
"ui.extent_type":"Extent Type",
"ui.extract_component":"Extract to File…",
"ui.extract_design_changed":"The design changed while choosing a file. Start Extract to File again.",
@@ -4673,11 +4766,39 @@
"ui.extrude_auto_to_object":"Extrude to a picked target",
"ui.extrude_auto_to_object_tip":"In Extrude, with a profile picked, picking a face, vertex or parallel plane off its plane switches the extent to To Object",
"ui.factor":"Factor",
"ui.fade":"Fade",
"ui.fade_length":"Fade Length",
"ui.feature_history":"Feature history",
"ui.feature_options":"Feature Options",
"ui.features":"Features",
"ui.file":"File",
"ui.fillet":"Fillet",
"ui.fillet_corner_ball":"Ball",
"ui.fillet_corner_ball_tip":"A piece of the rolling ball's sphere, tangent (G1) to each round.",
"ui.fillet_corner_curvature_tip":"Curvature (G2): a smooth patch. The corner is set back along each edge by the Setback ({factor} × the radius unless you type one) and filled with a patch, so reflections run through it without a kink.",
"ui.fillet_corner_needs_constant":"Smooth patch corners (G2) need Constant radius and Exact fit.",
"ui.fillet_corner_patch":"Smooth patch",
"ui.fillet_corner_patch_tip":"Curvature-continuous (G2): the corner is set back along each edge and filled with a patch, so reflections run through it without a kink.",
"ui.fillet_corner_tangent_tip":"Tangent (G1): a rolling-ball corner, a piece of the rolling ball's sphere tangent to each round.",
"ui.fillet_error_corner":"The smooth corner could not be built here. Try another Setback, or Tangent corners.",
"ui.fillet_error_failed":"This fillet could not be built on these edges. Try another radius, or round fewer edges at once.",
"ui.fillet_error_setback_short":"The setback is too short for this corner's patch: it builds from {least} on. Try a longer Setback.",
"ui.fillet_error_too_large":"The radius is too large for the faces beside these edges. Try a smaller radius, or set Face limits to Largest radius.",
"ui.fillet_fit":"Face limits",
"ui.fillet_fit_exact":"Exact radius",
"ui.fillet_fit_needs_constant":"Radius fit needs Constant radius.",
"ui.fillet_fit_reduce":"Largest radius",
"ui.fillet_fit_taper":"Narrowed radius",
"ui.fillet_fit_tip":"When the radius is larger than the faces beside an edge allow.\nExact radius: the radius as given, or nothing rounded and a message saying why.\nLargest radius: every edge rounded with the largest radius that fits.\nNarrowed radius: the radius kept, the round narrowed only where the faces run out.",
"ui.fillet_options_tip":"Tangent chain: also round the edges that continue smoothly from the picked ones.\nPreview: show the result in the view while you edit.",
"ui.fillet_setback":"Setback",
"ui.fillet_setback_hint":"{factor} × radius",
"ui.fillet_setback_least":"More than {least}",
"ui.fillet_setback_tip":"Where the smooth corner patch starts: how far along each edge from the corner. The default is {factor} × the radius. It must be more than the least setback, where the rounds meet without one: the radius where the faces are square to each other.",
"ui.fillet_smooth_radius":"Smooth radius change",
"ui.fillet_type_choices_tip":"Constant radius: one radius all along the edge.\nChord length: the width across the round stays the same, whatever angle the faces meet at.\nVariable radius: a radius at each end, and more along the edge if you add them.\nCurvature continuous: a section without a kink in reflections where it meets flat faces (G2).\nSpline: the radius along the edge follows control radii you set.",
"ui.fillet_type_tip":"The section across the edge. Curvature continuous: a curvature-continuous (G2) section between planar faces, so reflections run from the faces into the round without a kink.",
"ui.filter_commands_or_keys":"Filter commands or keys",
"ui.findInTimeline":"Find in Timeline",
"ui.findInWindow":"Find in Window",
@@ -4827,6 +4948,7 @@
"ui.inspect":"Inspect",
"ui.instances":"Instances",
"ui.intersect":"Intersect",
"ui.iso_4753":"ISO 4753",
"ui.isolate":"Isolate",
"ui.join":"Join",
"ui.joint_play":"▶ Play",
@@ -4929,6 +5051,7 @@
"ui.part_size_needs_a_part":"Select an inserted standard part (a screw, nut, washer or pin) to change its size. To make a body larger or smaller, use Scale.",
"ui.part_size_shared":"Rebuilds the part, replacing any added features. All occurrences of this component update.",
"ui.paste":"Paste",
"ui.patch_continuity_corner_tip":"The patch meets the faces round it at the chosen continuity along each side. At a corner where those faces meet each other with different curvatures, it stays tangent (G1) there.",
"ui.path":"Path",
"ui.pattern_object_type_tip":"Bodies: solid shapes, picked in the view or the Browser; each is copied whole.\nFeatures: steps of the History, such as an extrude or a hole, picked in the History or on a face they made; the step is repeated.\nA sketch is neither: repeat its curves with the sketch's own Pattern or Mirror, or extrude it first.",
"Reopen the designs that were open when SolidCraft was last closed":"פתיחה מחדש של התכנונים שהיו פתוחים בפעם הקודמת",
"Repair Part":"תיקון חלק",
"Replace existing library file":"החלפת קובץ הספרייה הקיים",
"Report a bug — review a screenshot and open a GitHub draft":"דיווח על באג — בדיקת צילום מסך ופתיחת טיוטה ב־GitHub",
"Report copied. Keep this text to submit on GitHub when you are online.":"הדיווח הועתק. יש לשמור את הטקסט כדי לשלוח אותו ב-GitHub כשהחיבור לאינטרנט יהיה זמין.",
"crash.unclean_explanation":"זוהה בהפעלה מאוחרת יותר; זמן היציאה המדויק לא נרשם. גם כיבוי של המערכת או עצירה בכפייה עלולים לגרום ליציאה לא תקינה.",
"delete.and_more":"… ועוד {count}",
"diagnostic.empty_boolean_component":"אין גוף להסרה או לחיתוך משותף ברכיב '{component}'; ייתכן שהכלי חופף ל־'{body}' ברכיב '{other}' — יש להפעיל את הרכיב הזה או לבחור את הגוף כיעד",
"diagnostic.reselect_reference":"{feature}: ההפניה `{reference}` כבר אינה קיימת כפי שנבחרה; יש לבחור אותה מחדש",
"dialog.bodies_count":"{count} גופים",
"dialog.clearance_invalid":"המרווח חייב להיות אורך של 0 ומעלה",
"dialog.compute":"חישוב",
@@ -1425,6 +1432,14 @@
"file_load.reading_percent":"קורא את הקובץ... {percent}%",
"file_load.rebuilding":"בונה מחדש פיצ'ר {done} מתוך {total}",
"file_load.recovering":"משחזר את התכן",
"file_load.step_build":"בונה את המודל",
"file_load.step_feature":"תכונה {done} מתוך {total}",
"file_load.step_part":"חלק {done} מתוך {total}",
"file_load.step_percent":"{percent}%",
"file_load.step_read":"קורא את הקובץ",
"file_load.step_rebuild":"בונה מחדש את התכונות",
"file_load.step_repair":"בודק ומתקן את החלקים",
"file_load.step_show":"מכין את התצוגה",
"file_load.stopping":"ממתין לעצירת הפעולה הקודמת...",
"file_load.updating_links":"עדכון קישורים",
"file_load.waiting":"ממתין לפעולת קובץ",
@@ -1719,6 +1734,7 @@
"help.timeline.delete":"מחיקת הפיצ'רים שנבחרו מציר הזמן; מחיקת סקיצה מוחקת גם את הפיצ'רים שנבנו ממנה. מתאים להסרת שלב שכבר אין בו צורך.",
"help.timeline.dependents":"הצגת הפיצ'רים שיימחקו יחד עם פיצ'ר, ואלה שייכשלו בלעדיו. מתאים לפני מחיקה או שינוי של פיצ'ר.",
"help.timeline.play":"הפעלה מחדש של הפיצ'רים שנותרו, אחד בכל פעם, עם השהיה של חצי שנייה לאחר כל בנייה מחדש. להפסקה יש להפעיל שוב את הפקודה או ללחוץ על Escape; מעבר לסוף מתבצע מיד.",
"help.version":"גרסה {version}",
"help.view.apply":"סיבוב התצוגה לכיוון סטנדרטי כמו חזית, מבט עליון או איזומטרי, או לתצוגה שמורה בשם. מתאים להתבוננות במודל מזווית קבועה.",
"help.view.delete":"מחיקת תצוגה שמורה. המודל אינו משתנה.",
"help.view.fit":"זום והזזה כך שכל המודל, או הבחירה, ימלאו את התצוגה. מתאים כשהמודל יצא מהטווח הנראה.",
@@ -1806,6 +1822,27 @@
"home.start_hint":"אפשר ליצור תכן, לפתוח קובץ אחרון או לעיין בדוגמה.",
"home.whats_new":"מה חדש",
"home.yesterday":"אתמול",
"import_report.details":"פרטים:",
"import_report.file_one":"הייתה בעיה נוספת אחת בקובץ.",
"import_report.file_other":"היו {count} בעיות נוספות בקובץ.",
"import_report.hint":"ייצוא מחדש של החלקים האלה מהתוכנה שיצרה אותם עשוי לפתור זאת. ב„העתקת הודעת האזהרה” יש את הפרטים.",
"import_report.left_out_one":"לא ניתן היה לתקן פאה אחת והיא חסרה.",
"import_report.left_out_other":"לא ניתן היה לתקן {count} פאות והן חסרות.",
"import_report.needs_repair_one":"חלק אחד דורש תיקון לפני שאפשר למדל עליו.",
"import_report.needs_repair_other":"{count} חלקים דורשים תיקון לפני שאפשר למדל עליהם.",
"import_report.not_imported_one":"לא ניתן היה לייבא חלק אחד.",
"import_report.not_imported_other":"לא ניתן היה לייבא {count} חלקים.",
"import_report.not_shown_one":"לא ניתן היה לצייר פאה אחת והיא מוסתרת.",
"import_report.not_shown_other":"לא ניתן היה לצייר {count} פאות והן מוסתרות.",
"import_report.open_one":"בחלק אחד יש רווחים בין הפאות והוא יובא כגוף פתוח.",
"import_report.open_other":"ב-{count} חלקים יש רווחים בין הפאות והם יובאו כגופים פתוחים.",
"import_report.refused_one":"לא ניתן היה להפוך חלק אחד לגוף מוצק והוא לא יובא.",
"import_report.refused_other":"לא ניתן היה להפוך {count} חלקים לגופים מוצקים והם לא יובאו.",
"import_report.repaired_one":"תוקנו פגמים קטנים בחלק אחד.",
"import_report.repaired_other":"תוקנו פגמים קטנים ב-{count} חלקים.",
"import_report.solids":"{solids} מתוך {parts} חלקים יובאו כגופים מוצקים.",
"import_report.surfaces_one":"לא ניתן היה להפוך חלק אחד לגוף מוצק והוא יובא כמשטחים.",
"import_report.surfaces_other":"לא ניתן היה להפוך {count} חלקים לגופים מוצקים והם יובאו כמשטחים.",
"install.button_tip":"התקנת SolidCraft כיישום: נפתח בחלון משלו ועובד גם ללא חיבור לרשת",
"install.dock_1":"יש לבחור קובץ › הוספה ל־Dock.",
"install.dock_2":"יש ללחוץ על הוספה.",
@@ -2351,6 +2388,8 @@
"prefs.profile_exported":"הפרופיל יוצא.",
"prefs.profile_imported":"הפרופיל יובא.",
"prefs.profile_name_hint":"שם הפרופיל, למשל מחשב נייד",
"prefs.profile_operations":"מדידת זמני פעולות",
"prefs.profile_operations_note":"מתעד כמה זמן לוקחות קריאות SMLib, פעולות ליבה, תכונות, פקודות וייבוא. סוכנים קוראים זאת עם diagnostics.profile.",
"prefs.profile_rename":"שינוי שם",
"prefs.profile_renamed":"שם הפרופיל שונה.",
"prefs.profile_save":"שמירה",
@@ -2380,6 +2419,9 @@
"prefs.scale_text":"קנה מידה וטקסט",
"prefs.search":"חיפוש הגדרות",
"prefs.search_empty":"אין הגדרות תואמות",
"prefs.section_hatch":"קווקוו חתך",
"prefs.section_hatch_by_part":"לפי חלק",
"prefs.section_hatch_one":"סגנון אחד",
"prefs.select":"בחירה",
"prefs.select_one_item":"בחירת פריט אחד",
"prefs.select_other_hidden":"בחירת גאומטריה מוסתרת באמצעות בחירה אחרת",
@@ -2494,6 +2536,12 @@
"prefs.under_cursor":"מתחת לסמן",
"prefs.units_precision":"יחידות ודיוק",
"prefs.updates":"עדכונים",
"prefs.validation":"בדיקת גופים",
"prefs.validation.each_feature":"פעם אחת לכל תכונה",
"prefs.validation.each_step":"אחרי כל שלב",
"prefs.validation.label":"הבדיקה המלאה של הקרנל",
"prefs.validation.off":"כבוי (ניסיוני)",
"prefs.validation_note":"אחרי כל שלב: בודק כל סחיפה, פעולה בוליאנית ועיגול.\nפעם אחת לכל תכונה: בודק את התוצאה של כל תכונה פעם אחת.\nכבוי (ניסיוני): אין בדיקה.",
"prefs.value_boxes_in_view":"הצגת ערכים ליד הידיות שלהם בתצוגה",
"prefs.value_boxes_in_view_tip":"ערך הפקודה (מרחק, רדיוס…) בתיבה ליד הידית שלו, מעל המודל. כבוי: מקלידים אותו בחלון הפקודה, שמקבל את המקלדת אחרי בחירה, ושום דבר לא מסתיר את המודל.",
"prefs.view":"התנהגות המבט",
@@ -2528,6 +2576,17 @@
"recovery.just_now":"זה עתה",
"recovery.min_ago":"לפני {count} דק'",
"recovery.never_saved":"לא נשמר מעולם",
"refused.change":"לא ניתן היה לשנות את {body}.",
"refused.cut":"לא ניתן היה לחתוך את {body}.",
"refused.face_curved":"אחת הפאות המעוקלות שלו אינה ניתנת לשימוש במידול.",
"refused.face_flat":"אחת הפאות השטוחות שלו אינה ניתנת לשימוש במידול.",
"refused.face_freeform":"אחת הפאות החופשיות שלו אינה ניתנת לשימוש במידול.",
"refused.face_rounded":"אחת הפאות המעוגלות שלו אינה ניתנת לשימוש במידול.",
"refused.faces_apart":"הפאות שלו אינן נפגשות בצמידות מספקת לשימוש במידול.",
"refused.intersect":"לא ניתן היה לחתוך עם {body}.",
"render.adaptive_enable":"הקצאת דגימות באמצעות דגימות גישוש עצמאיות",
@@ -3995,7 +4054,19 @@
"the section's profiles must be in one sketch":"הפרופילים של החתך חייבים להיות בסקיצה אחת",
"the two origins are on the same component":"שתי הראשיות נמצאות על אותו רכיב",
"thread.automatic_size":"גודל אוטומטי",
"thread.chamfer_depth_needed":"נדרש לצורה זו",
"thread.designation":"סימון",
"thread.drill_range":"מקדח יצרן המברז הוא {drill} מ\"מ. הקוטר הקטן התקני של התבריג הפנימי הוא {minor} מ\"מ. מתקבל מקדח מ-{low} עד {high} מ\"מ.",
"thread.drill_range_custom":"המקדח הוא הקוטר הגדול פחות הפסיעה, {drill} מ\"מ. הקוטר הקטן התקני של התבריג הפנימי הוא {minor} מ\"מ. מתקבל מקדח מ-{low} עד {high} מ\"מ.",
"thread.drill_range_taper":"מקדח יצרן המברז הוא {drill} מ\"מ. הקוטר הקטן התקני בסוף התבריג הוא {minor} מ\"מ. מתקבל מקדח מ-{low} עד {high} מ\"מ.",
"thread.end_square":"ישר",
"thread.fade_short":"1.25 P (ISO 3508)",
"thread.fade_standard":"2.5 P (ISO 3508)",
"thread.fits_the_face":"מתאים לפאה, למשל {example}",
"thread.form_bspp":"תבריג צנרת G (ISO 228-1)",
"thread.form_bspt":"תבריג צנרת קוני R, Rc (ISO 7-1)",
"ui.emboss_wrap_note":"פרופילי קווים ניצבים המשיקים לגליל נתמך נכרכים אוטומטית. יש לבחור דופן כדי לקבוע יעד.",
"ui.end":"סוף",
"ui.end_radius":"רדיוס סיום",
"ui.end_scale":"קנה מידה בסיום",
"ui.ends":"קצוות",
"ui.entities":"ישויות",
"ui.equal":"שווה",
"ui.equation_end":"סוף",
@@ -4665,6 +4757,7 @@
"ui.export_ellipsis_keymap":"ייצוא…",
"ui.export_keymap_tip":"מקשים, מועדפי תיבת S וסרגל הכלים, כקובץ",
"ui.extend":"הארכה",
"ui.extent":"גבול",
"ui.extent_type":"סוג גבול",
"ui.extract_component":"חילוץ לקובץ…",
"ui.extract_design_changed":"התכן השתנה בזמן בחירת הקובץ. יש להפעיל שוב את חילוץ לקובץ.",
@@ -4673,11 +4766,39 @@
"ui.extrude_auto_to_object":"שליפה עד יעד שנבחר",
"ui.extrude_auto_to_object_tip":"בשליפה, כשנבחר פרופיל, בחירת פאה, קודקוד או מישור מקביל מחוץ למישור שלו מעבירה את התחום ל\"עד אובייקט\"",
"ui.factor":"מקדם",
"ui.fade":"דעיכה",
"ui.fade_length":"אורך דעיכה",
"ui.feature_history":"ציר הזמן",
"ui.feature_options":"אפשרויות פיצ'ר",
"ui.features":"פיצ'רים",
"ui.file":"קובץ",
"ui.fillet":"עיגול פינה",
"ui.fillet_corner_ball":"כדור",
"ui.fillet_corner_ball_tip":"חלק מספירת הכדור המתגלגל, משיק (G1) לכל עיגול.",
"ui.fillet_corner_curvature_tip":"עקמומיות (G2): טלאי חלק. הפינה נסוגה לאורך כל קצה במרחק הנסיגה (פי {factor} מהרדיוס אלא אם תקלידו ערך) ומתמלאת בטלאי, כך שההשתקפויות עוברות בה בלי שבר.",
"ui.fillet_corner_needs_constant":"פינות עם טלאי חלק (G2) דורשות רדיוס קבוע והתאמת רדיוס מדויקת.",
"ui.fillet_corner_patch":"טלאי חלק",
"ui.fillet_corner_patch_tip":"רציף בעקמומיות (G2): הפינה נסוגה לאורך כל קצה ומתמלאת בטלאי, כך שההשתקפויות עוברות בה בלי שבר.",
"ui.fillet_corner_tangent_tip":"משיק (G1): פינת כדור מתגלגל, חלק מספירת הכדור המתגלגל, משיק לכל עיגול.",
"ui.fillet_error_corner":"לא ניתן היה לבנות כאן את הפינה החלקה. נסו נסיגה אחרת, או פינות משיקות.",
"ui.fillet_error_failed":"לא ניתן היה לבנות את העיגול הזה על הקצוות האלה. נסו רדיוס אחר, או עגלו פחות קצוות בבת אחת.",
"ui.fillet_error_setback_short":"הנסיגה קצרה מדי עבור הטלאי של פינה זו: הוא נבנה החל מ-{least}. נסו נסיגה ארוכה יותר.",
"ui.fillet_error_too_large":"הרדיוס גדול מדי עבור הפאות שליד הקצוות האלה. נסו רדיוס קטן יותר, או בחרו ב„גבולות הפאות” את „הרדיוס הגדול ביותר”.",
"ui.fillet_fit_tip":"כשהרדיוס גדול ממה שהפאות שליד הקצה מאפשרות.\nרדיוס מדויק: הרדיוס כפי שניתן, או ללא עיגול והודעה שמסבירה למה.\nהרדיוס הגדול ביותר: כל קצה מעוגל ברדיוס הגדול ביותר שנכנס.\nרדיוס מוצר: הרדיוס נשמר, והעיגול מוצר רק היכן שהפאות נגמרות.",
"ui.fillet_options_tip":"שרשרת משיקה: לעגל גם את הקצוות שממשיכים בחלקות מהקצוות שנבחרו.\nתצוגה מקדימה: להציג את התוצאה בתצוגה בזמן העריכה.",
"ui.fillet_setback":"נסיגה",
"ui.fillet_setback_hint":"{factor} × רדיוס",
"ui.fillet_setback_least":"יותר מ-{least}",
"ui.fillet_setback_tip":"היכן מתחיל טלאי הפינה החלק: המרחק לאורך כל קצה מהפינה. ברירת המחדל היא פי {factor} מהרדיוס. עליה להיות גדולה מהנסיגה המזערית, שבה העיגולים נפגשים בלעדיה: הרדיוס כשהפאות ניצבות זו לזו.",
"ui.fillet_smooth_radius":"שינוי רדיוס חלק",
"ui.fillet_type_choices_tip":"רדיוס קבוע: רדיוס אחד לכל אורך הקצה.\nאורך מיתר: רוחב העיגול נשאר זהה, בכל זווית שבה הפאות נפגשות.\nרדיוס משתנה: רדיוס בכל קצה, ועוד לאורך הקצה אם מוסיפים.\nרציף בעקמומיות: חתך בלי שבר בהשתקפויות היכן שהוא פוגש פאות מישוריות (G2).\nספליין: הרדיוס לאורך הקצה עוקב אחרי רדיוסי בקרה שאתם קובעים.",
"ui.fillet_type_curvature":"רציף בעקמומיות",
"ui.fillet_type_tip":"החתך לרוחב הקצה. רציף בעקמומיות: חתך רציף בעקמומיות (G2) בין פאות מישוריות, כך שההשתקפויות עוברות מהפאות אל העיגול בלי שבר.",
"ui.filter_commands_or_keys":"סינון פקודות או מקשים",
"ui.findInTimeline":"איתור בציר הזמן",
"ui.findInWindow":"איתור בחלון",
@@ -4827,6 +4948,7 @@
"ui.inspect":"בדיקה",
"ui.instances":"מופעים",
"ui.intersect":"חיתוך משותף",
"ui.iso_4753":"ISO 4753",
"ui.isolate":"בידוד",
"ui.join":"איחוד",
"ui.joint_play":"▶ הפעלה",
@@ -4929,6 +5051,7 @@
"ui.part_size_needs_a_part":"בחרו חלק סטנדרטי שהוכנס (בורג, אום, דסקית או פין) כדי לשנות את גודלו. כדי להגדיל או להקטין גוף, השתמשו בשינוי קנה מידה.",
"ui.part_size_shared":"בונה מחדש את החלק ומחליף פיצ'רים שנוספו. כל המופעים של רכיב זה מתעדכנים.",
"ui.paste":"הדבקה",
"ui.patch_continuity_corner_tip":"הטלאי פוגש את הפאות שסביבו ברציפות שנבחרה לאורך כל צלע. בפינה שבה הפאות האלה נפגשות זו עם זו בעקמומיות שונה, הוא נשאר משיק (G1) שם.",
"ui.path":"מסלול",
"ui.pattern_object_type_tip":"גופים: צורות מלאות, נבחרות בתצוגה או בעץ התכן; כל אחד מועתק בשלמותו.\nפיצ'רים: שלבים בציר הזמן, כמו שליפה או חור, נבחרים בציר הזמן או על פאה שהם יצרו; השלב חוזר על עצמו.\nסקיצה אינה אף אחד מהם: חזרו על העקומות שלה בעזרת המערך או השיקוף של הסקיצה עצמה, או בצעו לה שליפה קודם.",
"ui.continuity_smooth_curvature_change_tip":"부드러운 곡률 변화(G4): 이음매에서 곡률이 변하는 방식까지 부드럽게 이어집니다.",
"ui.continuity_tangent":"접선",
"ui.continuity_tangent_tip":"접선(G1): 꺾임은 없지만, 이음매에서 곡률이 급변합니다.",
"ui.copy":"복사",
"ui.copy_details":"세부 정보 복사",
"ui.copy_details_tip":"찾아보거나 보고할 수 있도록 전체 메시지를 복사합니다.",
"ui.corner":"코너",
"ui.corners":"코너",
"ui.counterbore":"카운터보어",
@@ -3409,6 +3491,7 @@
"ui.edit_sketch_empty":"편집할 스케치가 없습니다",
"ui.ellipse":"타원",
"ui.emboss_wrap_note":"지원되는 원통에 접하는 직교 선 프로파일은 자동으로 감깁니다. 대상을 고르려면 벽을 선택하세요.",
"ui.end":"끝",
"ui.end_radius":"끝 반지름",
"ui.end_scale":"끝 배율",
"ui.entities":"요소",
@@ -3433,11 +3516,39 @@
"ui.extent_type":"범위 유형",
"ui.extrude":"돌출",
"ui.factor":"배율",
"ui.fade":"페이드",
"ui.fade_length":"페이드 길이",
"ui.feature_history":"피처 기록",
"ui.feature_options":"피처 옵션",
"ui.features":"피처",
"ui.file":"파일",
"ui.fillet":"필렛",
"ui.fillet_corner_ball":"볼",
"ui.fillet_corner_ball_tip":"굴러가는 볼의 구면 일부로, 각 라운드에 접합니다(G1).",
"ui.fillet_corner_curvature_tip":"곡률(G2): 부드러운 패치. 코너를 각 모서리를 따라 셋백만큼(입력하지 않으면 반지름의 {factor}배) 물려 패치로 채우므로, 반사가 꺾임 없이 지나갑니다.",
"ui.fillet_corner_needs_constant":"부드러운 패치 코너(G2)에는 일정한 반지름과 정확한 반지름 맞춤이 필요합니다.",
"ui.fillet_corner_patch":"부드러운 패치",
"ui.fillet_corner_patch_tip":"곡률 연속(G2): 코너를 각 모서리를 따라 물려 패치로 채우므로, 반사가 꺾임 없이 지나갑니다.",
"ui.fillet_corner_tangent_tip":"접선(G1): 굴러가는 볼 코너. 굴러가는 볼의 구면 일부로, 각 라운드에 접합니다.",
"ui.fillet_error_corner":"여기에서는 부드러운 코너를 만들 수 없었습니다. 다른 셋백이나 접선 코너를 시도해 보세요.",
"ui.fillet_error_failed":"이 모서리들에 이 필렛을 만들 수 없었습니다. 다른 반지름을 시도하거나 한 번에 둥글게 하는 모서리 수를 줄여 보세요.",
"ui.fillet_error_setback_short":"이 코너의 패치에 비해 셋백이 너무 짧습니다. {least}부터 만들 수 있습니다. 더 긴 셋백을 시도해 보세요.",
"ui.fillet_error_too_large":"이 모서리 옆의 면에 비해 반지름이 너무 큽니다. 더 작은 반지름을 시도하거나 '면 경계'를 '최대 반지름'으로 설정하세요.",
"ui.fillet_fit":"면 경계",
"ui.fillet_fit_exact":"정확한 반지름",
"ui.fillet_fit_needs_constant":"반지름 맞춤에는 일정한 반지름이 필요합니다.",
"ui.fillet_fit_reduce":"최대 반지름",
"ui.fillet_fit_taper":"좁힌 반지름",
"ui.fillet_fit_tip":"반지름이 모서리 옆 면이 허용하는 것보다 클 때.\n정확한 반지름: 지정한 반지름 그대로, 또는 둥글게 하지 않고 이유를 알리는 메시지.\n최대 반지름: 모든 모서리를 들어가는 가장 큰 반지름으로 둥글게 합니다.\n좁힌 반지름: 반지름을 유지하고 면이 모자란 곳에서만 라운드를 좁힙니다.",
"ui.fillet_options_tip":"접선 체인: 선택한 모서리에서 부드럽게 이어지는 모서리도 둥글게 합니다.\n미리 보기: 편집하는 동안 결과를 뷰에 표시합니다.",
"ui.fillet_setback":"셋백",
"ui.fillet_setback_hint":"{factor} × 반지름",
"ui.fillet_setback_least":"{least}보다 크게",
"ui.fillet_setback_tip":"부드러운 코너 패치가 시작되는 위치: 코너에서 각 모서리를 따른 거리. 기본값은 반지름의 {factor}배. 최소 셋백(셋백 없이 라운드가 만나는 곳, 면이 서로 직각이면 반지름)보다 커야 합니다.",
"ui.fillet_smooth_radius":"반지름 부드럽게 변화",
"ui.fillet_type_choices_tip":"일정한 반지름: 모서리 전체에 하나의 반지름.\n현 길이: 면이 어떤 각도로 만나든 라운드의 폭이 같습니다.\n가변 반지름: 양 끝의 반지름과, 추가하면 모서리를 따라 더.\n곡률 연속: 평면과 만나는 곳에서 반사가 꺾이지 않는 단면(G2).\n스플라인: 모서리를 따라 반지름이 설정한 제어 반지름을 따릅니다.",
"ui.fillet_type_curvature":"곡률 연속",
"ui.fillet_type_tip":"모서리를 가로지르는 단면. 곡률 연속: 평면 사이의 곡률 연속(G2) 단면으로, 반사가 면에서 라운드로 꺾임 없이 이어집니다.",
"ui.filter_commands_or_keys":"명령 또는 키 필터",
"ui.findInTimeline":"타임라인에서 찾기",
"ui.findInWindow":"창에서 찾기",
@@ -3670,6 +3781,7 @@
"ui.part_size_needs_a_part":"크기를 바꿀 삽입된 표준 부품(나사, 너트, 와셔 또는 핀)을 선택하십시오. 바디를 키우거나 줄이려면 축척을 사용하십시오.",
"ui.part_size_shared":"부품을 다시 빌드하며 추가된 피처는 모두 대체됩니다. 이 구성요소의 모든 인스턴스가 업데이트됩니다.",
"ui.paste":"붙여넣기",
"ui.patch_continuity_corner_tip":"패치는 각 변을 따라 주변 면과 선택한 연속성으로 이어집니다. 주변 면끼리 서로 다른 곡률로 만나는 모서리에서는 그곳에서 접선(G1)으로 유지됩니다.",
"ui.path":"경로",
"ui.pattern_object_type_tip":"바디: 뷰나 브라우저에서 선택하는 솔리드 형상이며, 각각 통째로 복사됩니다.\n피처: 돌출이나 구멍 같은 기록의 단계이며, 기록에서 또는 그 단계가 만든 면에서 선택합니다. 그 단계가 반복됩니다.\n스케치는 둘 다 아닙니다. 곡선은 스케치 안의 패턴이나 대칭 복사로 반복하거나, 먼저 돌출하세요.",
"ui.continuity_smooth_curvature_change_tip":"Smooth curvature change (G4): even the way the curvature changes runs on smoothly across the seam.",
"ui.fillet_corner_tangent_tip":"Tangent (G1): a rolling-ball corner, a piece of the rolling ball's sphere tangent to each round.",
"ui.fillet_corner_curvature_tip":"Curvature (G2): a smooth patch. The corner is set back along each edge by the Setback ({factor} × the radius unless you type one) and filled with a patch, so reflections run through it without a kink."
"ui.continuity_smooth_curvature_change_tip":"تغيّر انحناء سلس (G4): حتى طريقة تغيّر الانحناء تستمر بسلاسة عبر خط الالتقاء.",
"ui.fillet_corner_tangent_tip":"مماس (G1): زاوية بالكرة المتدحرجة، جزء من سطح الكرة المتدحرجة مماسّ لكل تقويس.",
"ui.fillet_corner_curvature_tip":"الانحناء (G2): رقعة ناعمة. تُرجَع الزاوية على طول كل حافة بمقدار الإرجاع ({factor} ضعف نصف القطر ما لم تكتب قيمة) وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار."
"ui.continuity_smooth_curvature_change_tip":"Glatte Krümmungsänderung (G4): Selbst die Art, wie sich die Krümmung ändert, läuft an der Naht glatt weiter.",
"ui.fillet_corner_tangent_tip":"Tangential (G1): eine Kugelecke, ein Stück der Kugel des rollenden Balls, tangential zu jeder Rundung.",
"ui.fillet_corner_curvature_tip":"Krümmung (G2): ein glattes Flächenstück. Die Ecke wird entlang jeder Kante um den Rücksprung zurückgesetzt ({factor} × der Radius, sofern Sie keinen eingeben) und mit einem Flächenstück gefüllt, sodass Spiegelungen ohne Knick hindurchlaufen."
"ui.continuity_smooth_curvature_change_tip":"שינוי עקמומיות חלק (G4): גם האופן שבו העקמומיות משתנה ממשיך בצורה חלקה לאורך התפר.",
"ui.fillet_corner_tangent_tip":"משיק (G1): פינת כדור מתגלגל, חלק מספירת הכדור המתגלגל, משיק לכל עיגול.",
"ui.fillet_corner_curvature_tip":"עקמומיות (G2): טלאי חלק. הפינה נסוגה לאורך כל קצה במרחק הנסיגה (פי {factor} מהרדיוס אלא אם תקלידו ערך) ומתמלאת בטלאי, כך שההשתקפויות עוברות בה בלי שבר."
"ui.comb_length_tip":"How long the teeth are: a multiple of the automatic length, which makes the longest tooth a fifth of the size of the curves shown.",
"ui.comb_teeth":"Teeth",
"ui.comb_teeth_tip":"How many teeth each comb has, evenly spaced along the curve. More teeth show more detail of how the curvature changes."
},
"ar":{
"ui.comb_length":"طول المشط",
"ui.comb_length_tip":"طول الأسنان: مضاعف للطول التلقائي الذي يجعل أطول سنّ خُمس حجم المنحنيات المعروضة.",
"ui.comb_teeth":"الأسنان",
"ui.comb_teeth_tip":"عدد أسنان كل مشط، موزّعة بالتساوي على طول المنحنى. كلما زادت الأسنان ظهرت تفاصيل أكثر عن تغيّر الانحناء."
},
"de":{
"ui.comb_length":"Kammlänge",
"ui.comb_length_tip":"Wie lang die Zähne sind: ein Vielfaches der automatischen Länge, bei der der längste Zahn ein Fünftel der Größe der gezeigten Kurven ist.",
"ui.comb_teeth":"Zähne",
"ui.comb_teeth_tip":"Wie viele Zähne jeder Kamm hat, gleichmäßig entlang der Kurve verteilt. Mehr Zähne zeigen genauer, wie sich die Krümmung ändert."
},
"he":{
"ui.comb_length":"אורך המסרק",
"ui.comb_length_tip":"אורך השיניים: כפולה של האורך האוטומטי, שבו השן הארוכה ביותר היא חמישית מגודל העקומות המוצגות.",
"ui.comb_teeth":"שיניים",
"ui.comb_teeth_tip":"כמה שיניים יש לכל מסרק, במרווחים שווים לאורך העקומה. יותר שיניים מראות בפירוט רב יותר איך העקמומיות משתנה."
"ui.fillet_corner_ball_tip":"A piece of the rolling ball's sphere, tangent (G1) to each round.",
"ui.fillet_corner_needs_constant":"Smooth patch corners (G2) need Constant radius and Exact fit.",
"ui.fillet_corner_patch":"Smooth patch",
"ui.fillet_corner_patch_tip":"Curvature-continuous (G2): the corner is set back along each edge and filled with a patch, so reflections run through it without a kink.",
"ui.fillet_fit_needs_constant":"Radius fit needs Constant radius.",
"ui.fillet_setback":"Setback",
"ui.fillet_setback_hint":"{factor} × radius",
"ui.fillet_setback_tip":"Where the smooth corner patch starts: how far along each edge from the corner. The default is {factor} × the radius. It must be more than the least setback, where the rounds meet without one: the radius where the faces are square to each other.",
"ui.fillet_type_tip":"The section across the edge. Curvature continuous: a curvature-continuous (G2) section between planar faces, so reflections run from the faces into the round without a kink."
},
"ar":{
"ui.fillet_corner_ball":"كرة",
"ui.fillet_corner_ball_tip":"جزء من سطح الكرة المتدحرجة، مماسّ (G1) لكل تقويس.",
"ui.fillet_corner_needs_constant":"زوايا الرقعة الناعمة (G2) تتطلب نصف قطر ثابتًا وملاءمة دقيقة لنصف القطر.",
"ui.fillet_corner_patch":"رقعة ناعمة",
"ui.fillet_corner_patch_tip":"متصل الانحناء (G2): تُرجَع الزاوية على طول كل حافة وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار.",
"ui.fillet_fit_needs_constant":"ملاءمة نصف القطر تتطلب نصف قطر ثابتًا.",
"ui.fillet_setback":"مسافة الإرجاع",
"ui.fillet_setback_hint":"{factor} × نصف القطر",
"ui.fillet_setback_tip":"حيث تبدأ رقعة الزاوية الناعمة: المسافة على طول كل حافة من الزاوية. الافتراضي {factor} ضعف نصف القطر. يجب أن تكون أكبر من أقل مسافة إرجاع، حيث تلتقي الاستدارات بدونها: نصف القطر حيث تكون الأوجه متعامدة.",
"ui.fillet_type_tip":"المقطع عبر الحافة. متصل الانحناء: مقطع متصل الانحناء (G2) بين وجوه مستوية، فتمر الانعكاسات من الوجوه إلى التقويس دون انكسار."
},
"de":{
"ui.fillet_corner_ball":"Kugel",
"ui.fillet_corner_ball_tip":"Ein Stück der Kugel des rollenden Balls, tangential (G1) zu jeder Rundung.",
"ui.fillet_corner_needs_constant":"Ecken mit glattem Flächenstück (G2) brauchen einen konstanten Radius und exakte Radiusanpassung.",
"ui.fillet_corner_patch":"Glattes Flächenstück",
"ui.fillet_corner_patch_tip":"Krümmungsstetig (G2): Die Ecke wird entlang jeder Kante zurückgesetzt und mit einem Flächenstück gefüllt, sodass Spiegelungen ohne Knick hindurchlaufen.",
"ui.fillet_fit_needs_constant":"Radiusanpassung braucht einen konstanten Radius.",
"ui.fillet_setback":"Rücksprung",
"ui.fillet_setback_hint":"{factor} × Radius",
"ui.fillet_setback_tip":"Wo das glatte Eckflächenstück beginnt: wie weit von der Ecke entlang jeder Kante. Standard ist {factor} × der Radius. Er muss größer sein als der kleinste Rücksprung, wo sich die Rundungen ohne ihn treffen: der Radius, wo die Flächen rechtwinklig zueinander stehen.",
"ui.fillet_smooth_radius":"Radius glatt ändern",
"ui.fillet_type_curvature":"Krümmungsstetig",
"ui.fillet_type_tip":"Der Querschnitt über die Kante. Krümmungsstetig: ein krümmungsstetiger Querschnitt (G2) zwischen ebenen Flächen, sodass Spiegelungen ohne Knick von den Flächen in die Rundung laufen."
},
"he":{
"ui.fillet_corner_ball":"כדור",
"ui.fillet_corner_ball_tip":"חלק מספירת הכדור המתגלגל, משיק (G1) לכל עיגול.",
"ui.fillet_corner_needs_constant":"פינות עם טלאי חלק (G2) דורשות רדיוס קבוע והתאמת רדיוס מדויקת.",
"ui.fillet_corner_patch":"טלאי חלק",
"ui.fillet_corner_patch_tip":"רציף בעקמומיות (G2): הפינה נסוגה לאורך כל קצה ומתמלאת בטלאי, כך שההשתקפויות עוברות בה בלי שבר.",
"ui.fillet_setback_tip":"היכן מתחיל טלאי הפינה החלק: המרחק לאורך כל קצה מהפינה. ברירת המחדל היא פי {factor} מהרדיוס. עליה להיות גדולה מהנסיגה המזערית, שבה העיגולים נפגשים בלעדיה: הרדיוס כשהפאות ניצבות זו לזו.",
"ui.fillet_smooth_radius":"שינוי רדיוס חלק",
"ui.fillet_type_curvature":"רציף בעקמומיות",
"ui.fillet_type_tip":"החתך לרוחב הקצה. רציף בעקמומיות: חתך רציף בעקמומיות (G2) בין פאות מישוריות, כך שההשתקפויות עוברות מהפאות אל העיגול בלי שבר."
"ui.copy_details_tip":"Copy the full message, to look it up or to report it.",
"ui.fillet_error_corner":"The smooth corner could not be built here. Try another Setback, or Tangent corners.",
"ui.fillet_error_failed":"This fillet could not be built on these edges. Try another radius, or round fewer edges at once.",
"ui.fillet_error_too_large":"The radius is too large for the faces beside these edges. Try a smaller radius, or set Face limits to Largest radius.",
"ui.fillet_fit":"Face limits",
"ui.fillet_fit_exact":"Exact radius",
"ui.fillet_fit_reduce":"Largest radius",
"ui.fillet_fit_taper":"Narrowed radius",
"ui.fillet_fit_tip":"When the radius is larger than the faces beside an edge allow.\nExact radius: the radius as given, or nothing rounded and a message saying why.\nLargest radius: every edge rounded with the largest radius that fits.\nNarrowed radius: the radius kept, the round narrowed only where the faces run out.",
"ui.fillet_options_tip":"Tangent chain: also round the edges that continue smoothly from the picked ones.\nPreview: show the result in the view while you edit.",
"ui.fillet_type_choices_tip":"Constant radius: one radius all along the edge.\nChord length: the width across the round stays the same, whatever angle the faces meet at.\nVariable radius: a radius at each end, and more along the edge if you add them.\nCurvature continuous: a section without a kink in reflections where it meets flat faces (G2).\nSpline: the radius along the edge follows control radii you set."
},
"ar":{
"ui.copy_details":"نسخ التفاصيل",
"ui.copy_details_tip":"انسخ الرسالة كاملة للبحث عنها أو للإبلاغ عنها.",
"ui.fillet_error_corner":"تعذّر بناء الزاوية الناعمة هنا. جرّب مسافة إرجاع أخرى، أو زوايا مماسّة.",
"ui.fillet_error_failed":"تعذّر بناء هذا التقويس على هذه الحواف. جرّب نصف قطر آخر، أو قوّس حوافّ أقل في المرة الواحدة.",
"ui.fillet_error_too_large":"نصف القطر كبير جدًا على الوجوه المجاورة لهذه الحواف. جرّب نصف قطر أصغر، أو اختر في «حدود الوجوه» الخيار «أكبر نصف قطر».",
"ui.fillet_fit":"حدود الوجوه",
"ui.fillet_fit_exact":"نصف قطر دقيق",
"ui.fillet_fit_reduce":"أكبر نصف قطر",
"ui.fillet_fit_taper":"نصف قطر مُضيَّق",
"ui.fillet_fit_tip":"عندما يكون نصف القطر أكبر مما تسمح به الوجوه المجاورة للحافة.\nنصف قطر دقيق: نصف القطر كما هو، أو لا تقويس ورسالة توضّح السبب.\nأكبر نصف قطر: تُقوَّس كل حافة بأكبر نصف قطر يتّسع.\nنصف قطر مُضيَّق: يبقى نصف القطر، ويُضيَّق التقويس فقط حيث تنتهي الوجوه.",
"ui.fillet_options_tip":"سلسلة مماسّة: قوّس أيضًا الحواف التي تتصل بسلاسة بالحواف المختارة.\nمعاينة: اعرض النتيجة في العرض أثناء التحرير.",
"ui.fillet_type_choices_tip":"نصف قطر ثابت: نصف قطر واحد على طول الحافة.\nطول الوتر: يبقى عرض التقويس نفسه مهما كانت الزاوية بين الوجوه.\nنصف قطر متغيّر: نصف قطر عند كل طرف، ومزيد على طول الحافة إن أضفته.\nمتصل الانحناء: مقطع بلا انكسار في الانعكاسات حيث يلتقي بالوجوه المستوية (G2).\nمنحنى: يتبع نصف القطر على طول الحافة أنصاف أقطار تحكّم تحدّدها."
},
"de":{
"ui.copy_details":"Details kopieren",
"ui.copy_details_tip":"Die vollständige Meldung kopieren, um sie nachzuschlagen oder zu melden.",
"ui.fillet_error_corner":"Die glatte Ecke ließ sich hier nicht bauen. Versuchen Sie einen anderen Rücksprung oder tangentiale Ecken.",
"ui.fillet_error_failed":"Diese Rundung ließ sich an diesen Kanten nicht bauen. Versuchen Sie einen anderen Radius oder runden Sie weniger Kanten auf einmal.",
"ui.fillet_error_too_large":"Der Radius ist zu groß für die Flächen neben diesen Kanten. Versuchen Sie einen kleineren Radius oder stellen Sie „Flächengrenzen“ auf „Größter Radius“.",
"ui.fillet_fit":"Flächengrenzen",
"ui.fillet_fit_exact":"Exakter Radius",
"ui.fillet_fit_reduce":"Größter Radius",
"ui.fillet_fit_taper":"Verjüngter Radius",
"ui.fillet_fit_tip":"Wenn der Radius größer ist, als die Flächen neben einer Kante zulassen.\nExakter Radius: der angegebene Radius, oder keine Rundung und eine Meldung mit dem Grund.\nGrößter Radius: jede Kante mit dem größten passenden Radius gerundet.\nVerjüngter Radius: der Radius bleibt, die Rundung wird nur dort verjüngt, wo die Flächen enden.",
"ui.fillet_options_tip":"Tangentenkette: auch die Kanten runden, die glatt an die gewählten anschließen.\nVorschau: das Ergebnis beim Bearbeiten in der Ansicht zeigen.",
"ui.fillet_type_choices_tip":"Konstanter Radius: ein Radius entlang der ganzen Kante.\nSehnenlänge: die Breite der Rundung bleibt gleich, in welchem Winkel die Flächen auch aufeinandertreffen.\nVariabler Radius: ein Radius an jedem Ende und weitere entlang der Kante, wenn Sie sie hinzufügen.\nKrümmungsstetig: ein Querschnitt ohne Knick in den Spiegelungen, wo er auf ebene Flächen trifft (G2).\nSpline: der Radius entlang der Kante folgt Steuerradien, die Sie festlegen."
},
"he":{
"ui.copy_details":"העתקת פרטים",
"ui.copy_details_tip":"העתקת ההודעה המלאה, כדי לחפש אותה או לדווח עליה.",
"ui.fillet_error_corner":"לא ניתן היה לבנות כאן את הפינה החלקה. נסו נסיגה אחרת, או פינות משיקות.",
"ui.fillet_error_failed":"לא ניתן היה לבנות את העיגול הזה על הקצוות האלה. נסו רדיוס אחר, או עגלו פחות קצוות בבת אחת.",
"ui.fillet_error_too_large":"הרדיוס גדול מדי עבור הפאות שליד הקצוות האלה. נסו רדיוס קטן יותר, או בחרו ב„גבולות הפאות” את „הרדיוס הגדול ביותר”.",
"ui.fillet_fit":"גבולות הפאות",
"ui.fillet_fit_exact":"רדיוס מדויק",
"ui.fillet_fit_reduce":"הרדיוס הגדול ביותר",
"ui.fillet_fit_taper":"רדיוס מוצר",
"ui.fillet_fit_tip":"כשהרדיוס גדול ממה שהפאות שליד הקצה מאפשרות.\nרדיוס מדויק: הרדיוס כפי שניתן, או ללא עיגול והודעה שמסבירה למה.\nהרדיוס הגדול ביותר: כל קצה מעוגל ברדיוס הגדול ביותר שנכנס.\nרדיוס מוצר: הרדיוס נשמר, והעיגול מוצר רק היכן שהפאות נגמרות.",
"ui.fillet_options_tip":"שרשרת משיקה: לעגל גם את הקצוות שממשיכים בחלקות מהקצוות שנבחרו.\nתצוגה מקדימה: להציג את התוצאה בתצוגה בזמן העריכה.",
"ui.fillet_type_choices_tip":"רדיוס קבוע: רדיוס אחד לכל אורך הקצה.\nאורך מיתר: רוחב העיגול נשאר זהה, בכל זווית שבה הפאות נפגשות.\nרדיוס משתנה: רדיוס בכל קצה, ועוד לאורך הקצה אם מוסיפים.\nרציף בעקמומיות: חתך בלי שבר בהשתקפויות היכן שהוא פוגש פאות מישוריות (G2).\nספליין: הרדיוס לאורך הקצה עוקב אחרי רדיוסי בקרה שאתם קובעים."
"ui.copy_details_tip":"찾아보거나 보고할 수 있도록 전체 메시지를 복사합니다.",
"ui.fillet_error_corner":"여기에서는 부드러운 코너를 만들 수 없었습니다. 다른 셋백이나 접선 코너를 시도해 보세요.",
"ui.fillet_error_failed":"이 모서리들에 이 필렛을 만들 수 없었습니다. 다른 반지름을 시도하거나 한 번에 둥글게 하는 모서리 수를 줄여 보세요.",
"ui.fillet_error_too_large":"이 모서리 옆의 면에 비해 반지름이 너무 큽니다. 더 작은 반지름을 시도하거나 '면 경계'를 '최대 반지름'으로 설정하세요.",
"ui.fillet_fit":"면 경계",
"ui.fillet_fit_exact":"정확한 반지름",
"ui.fillet_fit_reduce":"최대 반지름",
"ui.fillet_fit_taper":"좁힌 반지름",
"ui.fillet_fit_tip":"반지름이 모서리 옆 면이 허용하는 것보다 클 때.\n정확한 반지름: 지정한 반지름 그대로, 또는 둥글게 하지 않고 이유를 알리는 메시지.\n최대 반지름: 모든 모서리를 들어가는 가장 큰 반지름으로 둥글게 합니다.\n좁힌 반지름: 반지름을 유지하고 면이 모자란 곳에서만 라운드를 좁힙니다.",
"ui.fillet_options_tip":"접선 체인: 선택한 모서리에서 부드럽게 이어지는 모서리도 둥글게 합니다.\n미리 보기: 편집하는 동안 결과를 뷰에 표시합니다.",
"ui.fillet_type_choices_tip":"일정한 반지름: 모서리 전체에 하나의 반지름.\n현 길이: 면이 어떤 각도로 만나든 라운드의 폭이 같습니다.\n가변 반지름: 양 끝의 반지름과, 추가하면 모서리를 따라 더.\n곡률 연속: 평면과 만나는 곳에서 반사가 꺾이지 않는 단면(G2).\n스플라인: 모서리를 따라 반지름이 설정한 제어 반지름을 따릅니다."
"ui.fillet_error_setback_short":"The setback is too short for this corner's patch: it builds from {least} on. Try a longer Setback."
},
"ar":{
"ui.fillet_error_setback_short":"مسافة الإرجاع قصيرة جدًا على رقعة هذه الزاوية: تُبنى ابتداءً من {least}. جرّب مسافة إرجاع أطول."
},
"de":{
"ui.fillet_error_setback_short":"Der Rücksprung ist für das Eckstück zu kurz: Es lässt sich ab {least} bauen. Versuchen Sie einen längeren Rücksprung."
},
"he":{
"ui.fillet_error_setback_short":"הנסיגה קצרה מדי עבור הטלאי של פינה זו: הוא נבנה החל מ-{least}. נסו נסיגה ארוכה יותר."
"import_report.not_shown_one":"تعذّر رسم وجه واحد وهو مخفي.",
"import_report.not_shown_other":"تعذّر رسم {count} أوجه وهي مخفية.",
"import_report.open_one":"في جزء واحد فجوات بين أوجهه، فاستُورد كجسم مفتوح.",
"import_report.open_other":"في {count} أجزاء فجوات بين أوجهها، فاستُوردت كأجسام مفتوحة.",
"import_report.repaired_one":"أُصلحت عيوب صغيرة في جزء واحد.",
"import_report.repaired_other":"أُصلحت عيوب صغيرة في {count} أجزاء.",
"import_report.solids":"استُورد {solids} من {parts} أجزاء كمجسمات.",
"import_report.surfaces_one":"تعذّر تحويل جزء واحد إلى مجسم، فاستُورد كأسطح.",
"import_report.surfaces_other":"تعذّر تحويل {count} أجزاء إلى مجسمات، فاستُوردت كأسطح."
},
"de":{
"import_report.details":"Details:",
"import_report.file_one":"Die Datei hatte 1 weiteres Problem.",
"import_report.file_other":"Die Datei hatte {count} weitere Probleme.",
"import_report.hint":"Die Teile erneut aus dem Programm zu exportieren, mit dem sie erstellt wurden, kann das beheben. „Warnmeldung kopieren“ enthält die Details.",
"import_report.left_out_one":"1 Fläche konnte nicht repariert werden und fehlt.",
"import_report.left_out_other":"{count} Flächen konnten nicht repariert werden und fehlen.",
"import_report.not_imported_one":"1 Teil konnte nicht importiert werden.",
"import_report.not_imported_other":"{count} Teile konnten nicht importiert werden.",
"import_report.not_shown_one":"1 Fläche konnte nicht gezeichnet werden und ist ausgeblendet.",
"import_report.not_shown_other":"{count} Flächen konnten nicht gezeichnet werden und sind ausgeblendet.",
"import_report.open_one":"1 Teil hat Lücken zwischen seinen Flächen und kam als offener Körper herein.",
"import_report.open_other":"{count} Teile haben Lücken zwischen ihren Flächen und kamen als offene Körper herein.",
"import_report.repaired_one":"Kleine Fehler wurden an 1 Teil repariert.",
"import_report.repaired_other":"Kleine Fehler wurden an {count} Teilen repariert.",
"import_report.solids":"{solids} von {parts} Teilen als Volumenkörper importiert.",
"import_report.surfaces_one":"1 Teil konnte nicht zu einem Volumenkörper werden und kam als Flächen herein.",
"import_report.surfaces_other":"{count} Teile konnten nicht zu Volumenkörpern werden und kamen als Flächen herein."
},
"he":{
"import_report.details":"פרטים:",
"import_report.file_one":"הייתה בעיה נוספת אחת בקובץ.",
"import_report.file_other":"היו {count} בעיות נוספות בקובץ.",
"import_report.hint":"ייצוא מחדש של החלקים האלה מהתוכנה שיצרה אותם עשוי לפתור זאת. ב„העתקת הודעת האזהרה” יש את הפרטים.",
"import_report.left_out_one":"לא ניתן היה לתקן פאה אחת והיא חסרה.",
"import_report.left_out_other":"לא ניתן היה לתקן {count} פאות והן חסרות.",
"import_report.not_imported_one":"לא ניתן היה לייבא חלק אחד.",
"import_report.not_imported_other":"לא ניתן היה לייבא {count} חלקים.",
"import_report.not_shown_one":"לא ניתן היה לצייר פאה אחת והיא מוסתרת.",
"import_report.not_shown_other":"לא ניתן היה לצייר {count} פאות והן מוסתרות.",
"import_report.open_one":"בחלק אחד יש רווחים בין הפאות והוא יובא כגוף פתוח.",
"import_report.open_other":"ב-{count} חלקים יש רווחים בין הפאות והם יובאו כגופים פתוחים.",
"import_report.repaired_one":"תוקנו פגמים קטנים בחלק אחד.",
"import_report.repaired_other":"תוקנו פגמים קטנים ב-{count} חלקים.",
"import_report.solids":"{solids} מתוך {parts} חלקים יובאו כגופים מוצקים.",
"import_report.surfaces_one":"לא ניתן היה להפוך חלק אחד לגוף מוצק והוא יובא כמשטחים.",
"import_report.surfaces_other":"לא ניתן היה להפוך {count} חלקים לגופים מוצקים והם יובאו כמשטחים."
"ui.patch_continuity_corner_tip":"The patch meets the faces round it at the chosen continuity along each side. At a corner where those faces meet each other with different curvatures, it stays tangent (G1) there."
},
"ar":{
"ui.patch_continuity_corner_tip":"تلتقي الرقعة بالأوجه المحيطة بها بالاستمرارية المختارة على طول كل جانب. وعند زاوية تلتقي فيها تلك الأوجه بعضها ببعض بانحناءات مختلفة، تبقى مماسّة (G1) هناك."
},
"de":{
"ui.patch_continuity_corner_tip":"Der Patch schließt entlang jeder Seite mit der gewählten Stetigkeit an die umgebenden Flächen an. An einer Ecke, an der diese Flächen mit unterschiedlicher Krümmung aufeinandertreffen, bleibt er dort tangential (G1)."
},
"he":{
"ui.patch_continuity_corner_tip":"הטלאי פוגש את הפאות שסביבו ברציפות שנבחרה לאורך כל צלע. בפינה שבה הפאות האלה נפגשות זו עם זו בעקמומיות שונה, הוא נשאר משיק (G1) שם."
"prefs.profile_operations_note":"Records how long SMLib calls, kernel operations, features, commands and imports take. Agents read it with diagnostics.profile."
},
"ar":{
"cmd.diagnostics_profile":"التحليل الزمني",
"prefs.profile_operations":"تحليل زمن العمليات",
"prefs.profile_operations_note":"يسجّل المدة التي تستغرقها استدعاءات SMLib وعمليات النواة والميزات والأوامر وعمليات الاستيراد. يقرؤه الوكلاء عبر diagnostics.profile."
"prefs.profile_operations_note":"Zeichnet auf, wie lange SMLib-Aufrufe, Kernel-Vorgänge, Features, Befehle und Importe dauern. Agenten lesen es mit diagnostics.profile."
},
"he":{
"cmd.diagnostics_profile":"פרופיל ביצועים",
"prefs.profile_operations":"מדידת זמני פעולות",
"prefs.profile_operations_note":"מתעד כמה זמן לוקחות קריאות SMLib, פעולות ליבה, תכונות, פקודות וייבוא. סוכנים קוראים זאת עם diagnostics.profile."
"thread.drill_range":"The tap maker's drill is {drill} mm. The internal thread's standard minor diameter is {minor} mm. A drill from {low} to {high} mm is accepted.",
"thread.drill_range_custom":"The drill is the major diameter less the pitch, {drill} mm. The internal thread's standard minor diameter is {minor} mm. A drill from {low} to {high} mm is accepted.",
"thread.drill_range_taper":"The tap maker's drill is {drill} mm. The standard's minor diameter where the thread ends is {minor} mm. A drill from {low} to {high} mm is accepted."
},
"ar":{
"thread.drill_range":"مثقاب صانع اللقمة {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.drill_range_custom":"المثقاب هو القطر الأكبر ناقص الخطوة، {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.drill_range_taper":"مثقاب صانع اللقمة {drill} مم. القطر الأصغر القياسي عند نهاية السن {minor} مم. يُقبل مثقاب من {low} إلى {high} مم."
},
"he":{
"thread.drill_range":"מקדח יצרן המברז הוא {drill} מ\"מ. הקוטר הקטן התקני של התבריג הפנימי הוא {minor} מ\"מ. מתקבל מקדח מ-{low} עד {high} מ\"מ.",
"thread.drill_range_custom":"המקדח הוא הקוטר הגדול פחות הפסיעה, {drill} מ\"מ. הקוטר הקטן התקני של התבריג הפנימי הוא {minor} מ\"מ. מתקבל מקדח מ-{low} עד {high} מ\"מ.",
"thread.drill_range_taper":"מקדח יצרן המברז הוא {drill} מ\"מ. הקוטר הקטן התקני בסוף התבריג הוא {minor} מ\"מ. מתקבל מקדח מ-{low} עד {high} מ\"מ."
},
"ja":{
"thread.drill_range":"タップメーカーの下穴ドリルは {drill} mm です。めねじの規格の内径は {minor} mm です。{low}～{high} mm のドリルを使用できます。",
"thread.drill_range_custom":"下穴ドリルは外径からピッチを引いた {drill} mm です。めねじの規格の内径は {minor} mm です。{low}～{high} mm のドリルを使用できます。",
"thread.drill_range_taper":"タップメーカーの下穴ドリルは {drill} mm です。ねじ終端での規格の内径は {minor} mm です。{low}～{high} mm のドリルを使用できます。"
},
"zh":{
"thread.drill_range":"丝锥制造商的钻头为 {drill} mm。内螺纹的标准小径为 {minor} mm。可使用 {low} 至 {high} mm 的钻头。",
"thread.drill_range_custom":"钻头为大径减螺距，{drill} mm。内螺纹的标准小径为 {minor} mm。可使用 {low} 至 {high} mm 的钻头。",
"thread.drill_range_taper":"丝锥制造商的钻头为 {drill} mm。螺纹终端处的标准小径为 {minor} mm。可使用 {low} 至 {high} mm 的钻头。"
},
"de":{
"thread.drill_range":"Der Bohrer des Gewindebohrerherstellers ist {drill} mm. Der genormte Kerndurchmesser des Innengewindes ist {minor} mm. Ein Bohrer von {low} bis {high} mm wird angenommen.",
"thread.drill_range_custom":"Der Bohrer ist der Nenndurchmesser minus Steigung, {drill} mm. Der genormte Kerndurchmesser des Innengewindes ist {minor} mm. Ein Bohrer von {low} bis {high} mm wird angenommen.",
"thread.drill_range_taper":"Der Bohrer des Gewindebohrerherstellers ist {drill} mm. Der genormte Kerndurchmesser am Gewindeende ist {minor} mm. Ein Bohrer von {low} bis {high} mm wird angenommen."
},
"ko":{
"thread.drill_range":"탭 제조사의 드릴은 {drill} mm입니다. 암나사의 규격 골지름은 {minor} mm입니다. {low}~{high} mm 드릴을 사용할 수 있습니다.",
"thread.drill_range_custom":"드릴은 바깥지름에서 피치를 뺀 {drill} mm입니다. 암나사의 규격 골지름은 {minor} mm입니다. {low}~{high} mm 드릴을 사용할 수 있습니다.",
"thread.drill_range_taper":"탭 제조사의 드릴은 {drill} mm입니다. 나사 끝에서의 규격 골지름은 {minor} mm입니다. {low}~{high} mm 드릴을 사용할 수 있습니다."
"prefs.validation_note":"Nach jedem Schritt: prüft jeden Sweep, jede Boolesche Operation und jede Rundung.\nEinmal je Feature: prüft das Ergebnis jedes Features einmal.\nAus (experimentell): keine Prüfung."
},
"en":{
"cmd.diagnostics_validation":"Validation",
"prefs.validation":"Body check",
"prefs.validation.each_feature":"Once per feature",
"prefs.validation.each_step":"After every step",
"prefs.validation.label":"Full kernel check",
"prefs.validation.off":"Off (experimental)",
"prefs.validation_note":"After every step: checks each sweep, boolean and blend.\nOnce per feature: checks each feature's result once.\nOff (experimental): no check."
},
"he":{
"cmd.diagnostics_validation":"אימות",
"prefs.validation":"בדיקת גופים",
"prefs.validation.each_feature":"פעם אחת לכל תכונה",
"prefs.validation.each_step":"אחרי כל שלב",
"prefs.validation.label":"הבדיקה המלאה של הקרנל",
"prefs.validation.off":"כבוי (ניסיוני)",
"prefs.validation_note":"אחרי כל שלב: בודק כל סחיפה, פעולה בוליאנית ועיגול.\nפעם אחת לכל תכונה: בודק את התוצאה של כל תכונה פעם אחת.\nכבוי (ניסיוני): אין בדיקה."
"ui.continuity_smooth_curvature_change":"Thay đổi độ cong trơn",
"ui.continuity_smooth_curvature_change_tip":"Thay đổi độ cong trơn (G4): ngay cả cách độ cong thay đổi cũng liền mạch qua đường nối.",
"ui.fillet_corner_tangent_tip":"Tiếp tuyến (G1): góc bi lăn, một phần mặt cầu của bi lăn tiếp tuyến với từng đường bo.",
"ui.fillet_corner_curvature_tip":"Độ cong (G2): một mảng trơn. Góc được lùi dọc theo mỗi cạnh một khoảng Lùi ({factor} × bán kính nếu bạn không nhập) rồi được lấp bằng một mảng, nên phản chiếu đi qua mà không bị gãy.",
"ui.continuity_curvature_change_tip":"Thay đổi độ cong (G3): độ cong cũng thay đổi trơn qua đường nối.",
"ui.continuity_curvature_tip":"Liên tục độ cong (G2): phản chiếu đi qua mà không bị gãy.",
"ui.continuity_position_tip":"Vị trí (G0): các bề mặt gặp nhau, tạo nếp gấp tại nơi đó.",
"ui.continuity_tangent_tip":"Tiếp tuyến (G1): không có nếp gấp, nhưng độ cong nhảy qua đường nối.",
"ui.comb_length":"Độ dài lược",
"ui.comb_length_tip":"Độ dài của các răng: bội số của độ dài tự động, độ dài này làm răng dài nhất bằng một phần năm kích thước các đường cong được hiển thị.",
"ui.comb_teeth":"Răng",
"ui.comb_teeth_tip":"Số răng của mỗi lược, cách đều dọc theo đường cong. Càng nhiều răng càng thấy rõ độ cong thay đổi thế nào.",
"ui.fillet_corner_ball":"Bi lăn",
"ui.fillet_corner_ball_tip":"Một phần mặt cầu của bi lăn, tiếp tuyến (G1) với từng đường bo.",
"ui.fillet_corner_needs_constant":"Góc mảng trơn (G2) cần Bán kính không đổi và Khớp chính xác.",
"ui.fillet_corner_patch":"Mảng trơn",
"ui.fillet_corner_patch_tip":"Liên tục độ cong (G2): góc được lùi dọc theo mỗi cạnh và được lấp bằng một mảng, nên phản chiếu đi qua mà không bị gãy.",
"ui.fillet_fit_needs_constant":"Khớp bán kính cần Bán kính không đổi.",
"ui.fillet_setback":"Lùi",
"ui.fillet_setback_hint":"{factor} × bán kính",
"ui.fillet_setback_tip":"Nơi mảng góc trơn bắt đầu: khoảng cách dọc theo mỗi cạnh tính từ góc. Mặc định là {factor} × bán kính. Giá trị phải lớn hơn khoảng lùi nhỏ nhất, tại đó các đường bo gặp nhau mà không cần lùi: bằng bán kính khi các mặt vuông góc với nhau.",
"ui.fillet_smooth_radius":"Thay đổi bán kính trơn",
"ui.fillet_type_curvature":"Liên tục độ cong",
"ui.fillet_type_tip":"Mặt cắt ngang qua cạnh. Liên tục độ cong: mặt cắt liên tục độ cong (G2) giữa các mặt phẳng, nên phản chiếu đi từ các mặt vào đường bo mà không bị gãy.",
"ui.copy_details":"Sao chép chi tiết",
"ui.copy_details_tip":"Sao chép toàn bộ thông báo để tra cứu hoặc báo cáo.",
"ui.fillet_error_corner":"Không thể tạo góc trơn tại đây. Hãy thử khoảng Lùi khác hoặc góc Tiếp tuyến.",
"ui.fillet_error_failed":"Không thể tạo đường bo này trên các cạnh này. Hãy thử bán kính khác hoặc bo ít cạnh hơn một lần.",
"ui.fillet_error_too_large":"Bán kính quá lớn so với các mặt bên cạnh những cạnh này. Hãy thử bán kính nhỏ hơn hoặc đặt Giới hạn mặt thành Bán kính lớn nhất.",
"ui.fillet_fit":"Giới hạn mặt",
"ui.fillet_fit_exact":"Bán kính chính xác",
"ui.fillet_fit_reduce":"Bán kính lớn nhất",
"ui.fillet_fit_taper":"Bán kính thu hẹp",
"ui.fillet_fit_tip":"Khi bán kính lớn hơn mức các mặt bên cạnh một cạnh cho phép.\nBán kính chính xác: đúng bán kính đã nhập, hoặc không bo gì và có thông báo lý do.\nBán kính lớn nhất: mọi cạnh được bo với bán kính lớn nhất vừa khớp.\nBán kính thu hẹp: giữ bán kính, đường bo chỉ thu hẹp ở nơi các mặt hết chỗ.",
"ui.fillet_options_tip":"Chuỗi tiếp tuyến: bo cả các cạnh nối tiếp trơn từ những cạnh đã chọn.\nXem trước: hiển thị kết quả trong khung nhìn khi bạn chỉnh sửa.",
"ui.fillet_type_choices_tip":"Bán kính không đổi: một bán kính dọc suốt cạnh.\nĐộ dài dây cung: độ rộng ngang đường bo giữ nguyên, bất kể góc gặp nhau của các mặt.\nBán kính thay đổi: một bán kính ở mỗi đầu, và thêm dọc cạnh nếu bạn thêm vào.\nLiên tục độ cong: mặt cắt không làm gãy phản chiếu tại nơi gặp các mặt phẳng (G2).\nSpline: bán kính dọc cạnh theo các bán kính điều khiển bạn đặt.",
"ui.fillet_setback_least":"Lớn hơn {least}",
"help.version":"Phiên bản {version}",
"import_report.refused_one":"1 chi tiết không thể tạo thành khối đặc và không được nhập.",
"import_report.refused_other":"{count} chi tiết không thể tạo thành khối đặc và không được nhập.",
"import_report.details":"Chi tiết:",
"import_report.file_one":"Có 1 vấn đề khác với tệp.",
"import_report.file_other":"Có {count} vấn đề khác với tệp.",
"import_report.hint":"Xuất lại các chi tiết này từ chương trình đã tạo ra chúng có thể khắc phục được. Sao chép thông báo cảnh báo có đầy đủ chi tiết.",
"import_report.left_out_one":"1 mặt không thể sửa và bị thiếu.",
"import_report.left_out_other":"{count} mặt không thể sửa và bị thiếu.",
"import_report.not_imported_one":"1 chi tiết không thể nhập.",
"import_report.not_imported_other":"{count} chi tiết không thể nhập.",
"import_report.not_shown_one":"1 mặt không thể vẽ và bị ẩn.",
"import_report.not_shown_other":"{count} mặt không thể vẽ và bị ẩn.",
"import_report.open_one":"1 chi tiết có khe hở giữa các mặt và được nhập thành thân hở.",
"import_report.open_other":"{count} chi tiết có khe hở giữa các mặt và được nhập thành thân hở.",
"import_report.repaired_one":"Đã sửa các lỗi nhỏ trong 1 chi tiết.",
"import_report.repaired_other":"Đã sửa các lỗi nhỏ trong {count} chi tiết.",
"import_report.solids":"Đã nhập {solids} trong {parts} chi tiết thành khối đặc.",
"import_report.surfaces_one":"1 chi tiết không thể tạo thành khối đặc và được nhập thành bề mặt.",
"import_report.surfaces_other":"{count} chi tiết không thể tạo thành khối đặc và được nhập thành bề mặt.",
"file_load.step_build":"Đang dựng mô hình",
"file_load.step_feature":"Đặc trưng {done} trong {total}",
"file_load.step_part":"Chi tiết {done} trong {total}",
"file_load.step_percent":"{percent}%",
"file_load.step_read":"Đang đọc tệp",
"file_load.step_rebuild":"Đang dựng lại các đặc trưng",
"file_load.step_repair":"Đang kiểm tra và sửa các chi tiết",
"file_load.step_show":"Đang chuẩn bị khung nhìn",
"ui.patch_continuity_corner_tip":"Mảng gặp các mặt xung quanh với độ liên tục đã chọn dọc theo mỗi cạnh. Tại góc nơi các mặt đó gặp nhau với độ cong khác nhau, mảng giữ tiếp tuyến (G1) ở đó.",
"thread.form_bspp":"Ống G (ISO 228-1)",
"thread.form_bspt":"Ống côn R, Rc (ISO 7-1)",
"thread.form_npt":"Ống côn NPT (ASME B1.20.1)",
"thread.form_rp":"Ống Rp (ISO 7-1)",
"cmd.diagnostics_profile":"Hồ sơ đo",
"prefs.profile_operations":"Đo thời gian thao tác",
"prefs.profile_operations_note":"Ghi lại thời gian các lệnh gọi SMLib, thao tác kernel, đặc trưng, lệnh và lần nhập. Tác tử đọc bằng diagnostics.profile.",
"diagnostic.reselect_reference":"{feature}: tham chiếu `{reference}` không còn tồn tại như khi được chọn; hãy chọn lại",
"Repair Part":"Sửa chi tiết",
"browser.needs_repair":"{name}: cần sửa",
"cmd.body_repair":"Sửa chi tiết",
"import_report.needs_repair_one":"1 chi tiết cần sửa trước khi có thể mô hình hóa tiếp.",
"import_report.needs_repair_other":"{count} chi tiết cần sửa trước khi có thể mô hình hóa tiếp.",
"refused.change":"Không thể thay đổi {body}.",
"refused.cut":"Không thể cắt {body}.",
"refused.face_curved":"Một trong các mặt cong của nó không dùng được để mô hình hóa.",
"refused.face_flat":"Một trong các mặt phẳng của nó không dùng được để mô hình hóa.",
"refused.face_freeform":"Một trong các mặt tự do của nó không dùng được để mô hình hóa.",
"refused.face_rounded":"Một trong các mặt bo tròn của nó không dùng được để mô hình hóa.",
"refused.faces_apart":"Các mặt của nó không gặp nhau đủ khít để dùng cho mô hình hóa.",
"refused.intersect":"Không thể giao với {body}.",
"refused.join":"Không thể nối vào {body}.",
"refused.repair":"Sửa chi tiết",
"refused.show_face":"Hiện mặt",
"prefs.section_hatch":"Gạch mặt cắt",
"prefs.section_hatch_by_part":"Theo chi tiết",
"prefs.section_hatch_one":"Một kiểu",
"thread.drill_range":"Mũi khoan của nhà sản xuất taro là {drill} mm. Đường kính trong tiêu chuẩn của ren trong là {minor} mm. Chấp nhận mũi khoan từ {low} đến {high} mm.",
"thread.drill_range_custom":"Mũi khoan bằng đường kính ngoài trừ bước ren, {drill} mm. Đường kính trong tiêu chuẩn của ren trong là {minor} mm. Chấp nhận mũi khoan từ {low} đến {high} mm.",
"thread.drill_range_taper":"Mũi khoan của nhà sản xuất taro là {drill} mm. Đường kính trong theo tiêu chuẩn tại nơi ren kết thúc là {minor} mm. Chấp nhận mũi khoan từ {low} đến {high} mm.",
"thread.fits_the_face":"vừa với mặt, ví dụ {example}",
"ui.chamfer_angle":"Góc vát",
"ui.chamfer_depth":"Chiều sâu vát",
"ui.ends":"Các đầu",
"ui.extent":"Phạm vi",
"ui.iso_4753":"ISO 4753",
"thread.chamfer_depth_needed":"bắt buộc với dạng này",
"thread.end_square":"Vuông",
"thread.fade_short":"1,25 P (ISO 3508)",
"thread.fade_standard":"2,5 P (ISO 3508)",
"ui.end":"Đầu",
"ui.fade":"Thoát ren",
"ui.fade_length":"Chiều dài thoát ren",
"cmd.diagnostics_validation":"Kiểm tra",
"prefs.validation":"Kiểm tra thân",
"prefs.validation.each_feature":"Một lần mỗi đặc trưng",
"prefs.validation.each_step":"Sau mỗi bước",
"prefs.validation.label":"Kiểm tra kernel đầy đủ",
"prefs.validation.off":"Tắt (thử nghiệm)",
"prefs.validation_note":"Sau mỗi bước: kiểm tra từng lần quét, phép boolean và đường bo.\nMột lần mỗi đặc trưng: kiểm tra kết quả của từng đặc trưng một lần.\nTắt (thử nghiệm): không kiểm tra.",
"Reopen the designs that were open when SolidCraft was last closed":"Mở lại các thiết kế đã mở lần trước",
"Repair Part":"Sửa chi tiết",
"Replace existing library file":"Thay thế tệp thư viện hiện có",
"Report a bug — review a screenshot and open a GitHub draft":"Báo cáo sự cố — xem lại ảnh chụp màn hình và mở bản nháp trên GitHub",
"Report copied. Keep this text to submit on GitHub when you are online.":"Đã sao chép báo cáo. Hãy giữ lại nội dung này để gửi lên GitHub khi có kết nối mạng.",
"browser.sketch_attachment_lost":"{name} (mất liên kết)",
@@ -834,6 +836,7 @@
"cmd.assembly_mass_properties":"Thuộc tính khối lượng",
"cmd.body.print_face":"Mặt in",
"cmd.body_rename":"Đổi tên thân khối",
"cmd.body_repair":"Sửa chi tiết",
"cmd.browser_collapse_all":"Thu gọn tất cả",
"cmd.browser_expand_all":"Mở rộng tất cả",
"cmd.browser_group":"Tạo nhóm mới",
@@ -918,6 +921,8 @@
"cmd.diagnostics_crash_reports":"Danh sách báo cáo sự cố",
"cmd.diagnostics_crash_reports_clear":"Xóa báo cáo sự cố ứng dụng",
"cmd.diagnostics_crash_test":"Kiểm tra cơ chế sập ứng dụng",
"cmd.diagnostics_profile":"Hồ sơ đo",
"cmd.diagnostics_validation":"Kiểm tra",
"cmd.doc_recover":"Khôi phục thiết kế",
"cmd.doc_recovery_discard":"Hủy thiết kế khôi phục",
"cmd.doc_recovery_list":"Danh sách thiết kế có thể khôi phục",
@@ -955,6 +960,7 @@
"cmd.frame_profile_list":"Thư viện tiết diện",
"cmd.frame_profile_properties":"Thuộc tính tiết diện",
"cmd.inspect_accessibility":"Phân tích khả năng gia công tiếp cận",
"cmd.inspect_analysis":"Phân tích khung nhìn",
"cmd.inspect_center_of_mass":"Trọng tâm",
"cmd.inspect_clearance":"Khoảng cách an toàn",
"cmd.inspect_colored_components":"Bật màu cụm chi tiết",
@@ -1360,6 +1366,7 @@
"crash.unclean_explanation":"Được phát hiện ở lần khởi chạy sau; thời điểm thoát chính xác không được ghi lại. Việc tắt máy hoặc buộc dừng cũng có thể gây ra thoát bất thường.",
"delete.and_more":"… và {count} mục khác",
"diagnostic.empty_boolean_component":"không có thân khối nào để cắt hoặc giao trong cụm chi tiết '{component}'; công cụ có thể giao nhau với '{body}' trong cụm chi tiết '{other}' — hãy kích hoạt cụm chi tiết đó hoặc chọn thân khối làm đối tượng đích",
"diagnostic.reselect_reference":"{feature}: tham chiếu `{reference}` không còn tồn tại như khi được chọn; hãy chọn lại",
"dialog.bodies_count":"{count} thân khối",
"dialog.clearance_invalid":"khoảng cách an toàn phải có chiều dài từ 0 trở lên",
"file_load.rebuilding":"Đang dựng lại tính năng {done} trên {total}",
"file_load.recovering":"Đang khôi phục thiết kế",
"file_load.step_build":"Đang dựng mô hình",
"file_load.step_feature":"Đặc trưng {done} trong {total}",
"file_load.step_part":"Chi tiết {done} trong {total}",
"file_load.step_percent":"{percent}%",
"file_load.step_read":"Đang đọc tệp",
"file_load.step_rebuild":"Đang dựng lại các đặc trưng",
"file_load.step_repair":"Đang kiểm tra và sửa các chi tiết",
"file_load.step_show":"Đang chuẩn bị khung nhìn",
"file_load.stopping":"Đang chờ thao tác trước đó dừng lại...",
"file_load.updating_links":"Đang cập nhật liên kết",
"file_load.waiting":"Đang chờ thao tác tệp",
@@ -1719,6 +1734,7 @@
"help.timeline.delete":"Xóa các tính năng đã chọn khỏi lịch sử; xóa một bản phác thảo cũng xóa các tính năng dựng từ nó. Dùng để bỏ một bước không còn cần.",
"help.timeline.dependents":"Liệt kê các tính năng sẽ bị xóa cùng một tính năng, và những tính năng sẽ lỗi nếu thiếu nó. Dùng trước khi xóa hoặc thay đổi một tính năng.",
"help.timeline.play":"Phát lại lần lượt các tính năng còn lại, tạm dừng nửa giây sau mỗi lần dựng lại. Chạy lại lệnh này hoặc nhấn Escape để dừng; Đến cuối sẽ chuyển ngay đến cuối lịch sử.",
"help.version":"Phiên bản {version}",
"help.view.apply":"Xoay khung nhìn về hướng chuẩn như trước, trên hoặc iso, hoặc về một góc nhìn đã lưu. Dùng để xem mô hình từ một góc cố định.",
"help.view.delete":"Xóa một góc nhìn đã lưu. Mô hình không bị thay đổi.",
"help.view.fit":"Phóng to và dịch khung nhìn để toàn bộ mô hình, hoặc phần đang chọn, lấp đầy khung nhìn. Dùng khi mô hình đã trôi ra khỏi tầm mắt.",
@@ -1806,6 +1822,27 @@
"home.start_hint":"Tạo thiết kế, mở tệp gần đây hoặc khám phá mẫu.",
"home.whats_new":"Có gì mới",
"home.yesterday":"Hôm qua",
"import_report.details":"Chi tiết:",
"import_report.file_one":"Có 1 vấn đề khác với tệp.",
"import_report.file_other":"Có {count} vấn đề khác với tệp.",
"import_report.hint":"Xuất lại các chi tiết này từ chương trình đã tạo ra chúng có thể khắc phục được. Sao chép thông báo cảnh báo có đầy đủ chi tiết.",
"import_report.left_out_one":"1 mặt không thể sửa và bị thiếu.",
"import_report.left_out_other":"{count} mặt không thể sửa và bị thiếu.",
"import_report.needs_repair_one":"1 chi tiết cần sửa trước khi có thể mô hình hóa tiếp.",
"import_report.needs_repair_other":"{count} chi tiết cần sửa trước khi có thể mô hình hóa tiếp.",
"import_report.not_imported_one":"1 chi tiết không thể nhập.",
"import_report.not_imported_other":"{count} chi tiết không thể nhập.",
"import_report.not_shown_one":"1 mặt không thể vẽ và bị ẩn.",
"import_report.not_shown_other":"{count} mặt không thể vẽ và bị ẩn.",
"import_report.open_one":"1 chi tiết có khe hở giữa các mặt và được nhập thành thân hở.",
"import_report.open_other":"{count} chi tiết có khe hở giữa các mặt và được nhập thành thân hở.",
"import_report.refused_one":"1 chi tiết không thể tạo thành khối đặc và không được nhập.",
"import_report.refused_other":"{count} chi tiết không thể tạo thành khối đặc và không được nhập.",
"import_report.repaired_one":"Đã sửa các lỗi nhỏ trong 1 chi tiết.",
"import_report.repaired_other":"Đã sửa các lỗi nhỏ trong {count} chi tiết.",
"import_report.solids":"Đã nhập {solids} trong {parts} chi tiết thành khối đặc.",
"import_report.surfaces_one":"1 chi tiết không thể tạo thành khối đặc và được nhập thành bề mặt.",
"import_report.surfaces_other":"{count} chi tiết không thể tạo thành khối đặc và được nhập thành bề mặt.",
"install.button_tip":"Cài đặt SolidCraft dưới dạng ứng dụng: mở trong cửa sổ riêng và hoạt động ngoại tuyến",
"prefs.profile_operations":"Đo thời gian thao tác",
"prefs.profile_operations_note":"Ghi lại thời gian các lệnh gọi SMLib, thao tác kernel, đặc trưng, lệnh và lần nhập. Tác tử đọc bằng diagnostics.profile.",
"prefs.profile_rename":"Đổi tên",
"prefs.profile_renamed":"Đã đổi tên hồ sơ.",
"prefs.profile_save":"Lưu",
@@ -2380,6 +2419,9 @@
"prefs.scale_text":"Tỉ lệ và văn bản",
"prefs.search":"Tìm kiếm cài đặt",
"prefs.search_empty":"Không có cài đặt nào khớp",
"prefs.section_hatch":"Gạch mặt cắt",
"prefs.section_hatch_by_part":"Theo chi tiết",
"prefs.section_hatch_one":"Một kiểu",
"prefs.select":"Chọn",
"prefs.select_one_item":"Chọn một mục",
"prefs.select_other_hidden":"Chọn hình học ẩn bằng Chọn đối tượng khác",
@@ -2494,6 +2536,12 @@
"prefs.under_cursor":"Dưới con trỏ chuột",
"prefs.units_precision":"Đơn vị và độ chính xác",
"prefs.updates":"Cập nhật ứng dụng",
"prefs.validation":"Kiểm tra thân",
"prefs.validation.each_feature":"Một lần mỗi đặc trưng",
"prefs.validation.each_step":"Sau mỗi bước",
"prefs.validation.label":"Kiểm tra kernel đầy đủ",
"prefs.validation.off":"Tắt (thử nghiệm)",
"prefs.validation_note":"Sau mỗi bước: kiểm tra từng lần quét, phép boolean và đường bo.\nMột lần mỗi đặc trưng: kiểm tra kết quả của từng đặc trưng một lần.\nTắt (thử nghiệm): không kiểm tra.",
"prefs.value_boxes_in_view":"Hiện giá trị cạnh tay nắm trong khung nhìn",
"prefs.value_boxes_in_view_tip":"Giá trị của lệnh (Khoảng cách, Bán kính…) trong một ô cạnh tay nắm, phía trên mô hình. Tắt: bạn nhập giá trị trong cửa sổ lệnh, cửa sổ này nhận bàn phím sau khi chọn, và không có gì che mô hình.",
"prefs.view":"Hành vi góc nhìn",
@@ -2528,6 +2576,17 @@
"recovery.just_now":"vừa xong",
"recovery.min_ago":"{count} phút trước",
"recovery.never_saved":"chưa từng lưu",
"refused.change":"Không thể thay đổi {body}.",
"refused.cut":"Không thể cắt {body}.",
"refused.face_curved":"Một trong các mặt cong của nó không dùng được để mô hình hóa.",
"refused.face_flat":"Một trong các mặt phẳng của nó không dùng được để mô hình hóa.",
"refused.face_freeform":"Một trong các mặt tự do của nó không dùng được để mô hình hóa.",
"refused.face_rounded":"Một trong các mặt bo tròn của nó không dùng được để mô hình hóa.",
"refused.faces_apart":"Các mặt của nó không gặp nhau đủ khít để dùng cho mô hình hóa.",
"render.adaptive_coverage":"Mục tiêu lỗi độ phủ (Coverage error)",
"render.adaptive_enable":"Phân bổ mẫu bằng các mẫu thử độc lập",
@@ -3995,7 +4054,19 @@
"the section's profiles must be in one sketch":"các biên dạng của mặt cắt phải nằm trong cùng một phác thảo",
"the two origins are on the same component":"hai gốc tọa độ nằm trên cùng một thành phần",
"thread.automatic_size":"Kích thước tự động",
"thread.chamfer_depth_needed":"bắt buộc với dạng này",
"thread.designation":"Ký hiệu ren",
"thread.drill_range":"Mũi khoan của nhà sản xuất taro là {drill} mm. Đường kính trong tiêu chuẩn của ren trong là {minor} mm. Chấp nhận mũi khoan từ {low} đến {high} mm.",
"thread.drill_range_custom":"Mũi khoan bằng đường kính ngoài trừ bước ren, {drill} mm. Đường kính trong tiêu chuẩn của ren trong là {minor} mm. Chấp nhận mũi khoan từ {low} đến {high} mm.",
"thread.drill_range_taper":"Mũi khoan của nhà sản xuất taro là {drill} mm. Đường kính trong theo tiêu chuẩn tại nơi ren kết thúc là {minor} mm. Chấp nhận mũi khoan từ {low} đến {high} mm.",
"thread.end_square":"Vuông",
"thread.fade_short":"1,25 P (ISO 3508)",
"thread.fade_standard":"2,5 P (ISO 3508)",
"thread.fits_the_face":"vừa với mặt, ví dụ {example}",
"thread.form_bspp":"Ống G (ISO 228-1)",
"thread.form_bspt":"Ống côn R, Rc (ISO 7-1)",
"thread.form_npt":"Ống côn NPT (ASME B1.20.1)",
"thread.form_rp":"Ống Rp (ISO 7-1)",
"thread.iso_metric":"Hệ mét ISO",
"thread.select_size":"Chọn kích thước",
"timeline.delete_after_marker_one":"Xóa 1 tính năng sau điểm đánh dấu lịch sử",
"ui.colour_vision_tritan_tip":"Dành cho người cảm nhận màu xanh dương yếu hoặc mất hẳn",
"ui.comb_length":"Độ dài lược",
"ui.comb_length_tip":"Độ dài của các răng: bội số của độ dài tự động, độ dài này làm răng dài nhất bằng một phần năm kích thước các đường cong được hiển thị.",
"ui.comb_teeth":"Răng",
"ui.comb_teeth_tip":"Số răng của mỗi lược, cách đều dọc theo đường cong. Càng nhiều răng càng thấy rõ độ cong thay đổi thế nào.",
"ui.combine":"Hợp nhất / Cắt khối",
"ui.coming_later":"sắp ra mắt",
"ui.command_done":"Hoàn tất lệnh {command}",
@@ -4522,11 +4599,24 @@
"ui.construction.ribbon_label":"Đường phụ",
"ui.construction.side_hint":"Đường dựng hình: nhấp phía mà đường kéo dài tới; nhấp chuột phải để bắt đầu lại",
"ui.context_menu":"Menu ngữ cảnh",
"ui.continuity_crease":"Nếp gập",
"ui.continuity_curvature":"Độ cong",
"ui.continuity_curvature_change":"Thay đổi độ cong",
"ui.continuity_curvature_change_tip":"Thay đổi độ cong (G3): độ cong cũng thay đổi trơn qua đường nối.",
"ui.continuity_curvature_tip":"Liên tục độ cong (G2): phản chiếu đi qua mà không bị gãy.",
"ui.continuity_g0":"Nếp gập G0",
"ui.continuity_g1":"G1 tiếp tuyến",
"ui.continuity_g2":"G2 độ cong",
"ui.continuity_gap":"Khe hở",
"ui.continuity_position":"Vị trí liên tục",
"ui.continuity_position_tip":"Vị trí (G0): các bề mặt gặp nhau, tạo nếp gấp tại nơi đó.",
"ui.continuity_smooth_curvature_change":"Thay đổi độ cong trơn",
"ui.continuity_smooth_curvature_change_tip":"Thay đổi độ cong trơn (G4): ngay cả cách độ cong thay đổi cũng liền mạch qua đường nối.",
"ui.continuity_tangent":"Tiếp tuyến",
"ui.continuity_tangent_tip":"Tiếp tuyến (G1): không có nếp gấp, nhưng độ cong nhảy qua đường nối.",
"ui.copy":"Sao chép",
"ui.copy_details":"Sao chép chi tiết",
"ui.copy_details_tip":"Sao chép toàn bộ thông báo để tra cứu hoặc báo cáo.",
"ui.corner":"Góc",
"ui.corners":"Các góc",
"ui.cosmetic_thread_markings":"Ký hiệu ren quy ước",
@@ -4644,8 +4734,10 @@
"ui.edit_sketch_empty":"Không có phác thảo để chỉnh sửa",
"ui.ellipse":"Hình elip",
"ui.emboss_wrap_note":"Các biên dạng đường trực giao tiếp xúc với một hình trụ được hỗ trợ sẽ tự động quấn. Chọn một thành để chọn mục tiêu.",
"ui.end":"Đầu",
"ui.end_radius":"Bán kính kết thúc",
"ui.end_scale":"Tỷ lệ đầu cuối",
"ui.ends":"Các đầu",
"ui.entities":"Các thực thể",
"ui.equal":"Bằng nhau",
"ui.equation_end":"Kết thúc",
@@ -4665,6 +4757,7 @@
"ui.export_ellipsis_keymap":"Xuất tệp…",
"ui.export_keymap_tip":"Xuất phím tắt, danh sách S box yêu thích và thanh công cụ ra tệp",
"ui.extend":"Kéo dài đường",
"ui.extent":"Phạm vi",
"ui.extent_type":"Kiểu giới hạn kéo dài",
"ui.extract_component":"Trích xuất ra tệp riêng…",
"ui.extract_design_changed":"Thiết kế đã thay đổi trong khi đang chọn tệp. Vui lòng thực hiện lại lệnh Trích xuất ra tệp.",
@@ -4673,11 +4766,39 @@
"ui.extrude_auto_to_object":"Đùn khối đến đối tượng được chọn",
"ui.extrude_auto_to_object_tip":"Trong lệnh Đùn, khi đã chọn biên dạng, nhấp chọn một mặt, đỉnh hoặc mặt phẳng song song ngoài mặt phẳng của nó sẽ tự động chuyển phạm vi đùn thành 'Đến đối tượng' (To Object)",
"ui.factor":"Hệ số",
"ui.fade":"Thoát ren",
"ui.fade_length":"Chiều dài thoát ren",
"ui.feature_history":"Lịch sử tính năng",
"ui.feature_options":"Tùy chọn tính năng",
"ui.features":"Các tính năng",
"ui.file":"Tệp",
"ui.fillet":"Bo tròn mép",
"ui.fillet_corner_ball":"Bi lăn",
"ui.fillet_corner_ball_tip":"Một phần mặt cầu của bi lăn, tiếp tuyến (G1) với từng đường bo.",
"ui.fillet_corner_curvature_tip":"Độ cong (G2): một mảng trơn. Góc được lùi dọc theo mỗi cạnh một khoảng Lùi ({factor} × bán kính nếu bạn không nhập) rồi được lấp bằng một mảng, nên phản chiếu đi qua mà không bị gãy.",
"ui.fillet_corner_needs_constant":"Góc mảng trơn (G2) cần Bán kính không đổi và Khớp chính xác.",
"ui.fillet_corner_patch":"Mảng trơn",
"ui.fillet_corner_patch_tip":"Liên tục độ cong (G2): góc được lùi dọc theo mỗi cạnh và được lấp bằng một mảng, nên phản chiếu đi qua mà không bị gãy.",
"ui.fillet_corner_tangent_tip":"Tiếp tuyến (G1): góc bi lăn, một phần mặt cầu của bi lăn tiếp tuyến với từng đường bo.",
"ui.fillet_error_corner":"Không thể tạo góc trơn tại đây. Hãy thử khoảng Lùi khác hoặc góc Tiếp tuyến.",
"ui.fillet_error_failed":"Không thể tạo đường bo này trên các cạnh này. Hãy thử bán kính khác hoặc bo ít cạnh hơn một lần.",
"ui.fillet_error_setback_short":"Khoảng lùi quá ngắn cho mảng ở góc này: góc dựng được từ {least} trở lên. Hãy thử một khoảng Lùi dài hơn.",
"ui.fillet_error_too_large":"Bán kính quá lớn so với các mặt bên cạnh những cạnh này. Hãy thử bán kính nhỏ hơn hoặc đặt Giới hạn mặt thành Bán kính lớn nhất.",
"ui.fillet_fit":"Giới hạn mặt",
"ui.fillet_fit_exact":"Bán kính chính xác",
"ui.fillet_fit_needs_constant":"Khớp bán kính cần Bán kính không đổi.",
"ui.fillet_fit_reduce":"Bán kính lớn nhất",
"ui.fillet_fit_taper":"Bán kính thu hẹp",
"ui.fillet_fit_tip":"Khi bán kính lớn hơn mức các mặt bên cạnh một cạnh cho phép.\nBán kính chính xác: đúng bán kính đã nhập, hoặc không bo gì và có thông báo lý do.\nBán kính lớn nhất: mọi cạnh được bo với bán kính lớn nhất vừa khớp.\nBán kính thu hẹp: giữ bán kính, đường bo chỉ thu hẹp ở nơi các mặt hết chỗ.",
"ui.fillet_options_tip":"Chuỗi tiếp tuyến: bo cả các cạnh nối tiếp trơn từ những cạnh đã chọn.\nXem trước: hiển thị kết quả trong khung nhìn khi bạn chỉnh sửa.",
"ui.fillet_setback":"Lùi",
"ui.fillet_setback_hint":"{factor} × bán kính",
"ui.fillet_setback_least":"Lớn hơn {least}",
"ui.fillet_setback_tip":"Nơi mảng góc trơn bắt đầu: khoảng cách dọc theo mỗi cạnh tính từ góc. Mặc định là {factor} × bán kính. Giá trị phải lớn hơn khoảng lùi nhỏ nhất, tại đó các đường bo gặp nhau mà không cần lùi: bằng bán kính khi các mặt vuông góc với nhau.",
"ui.fillet_smooth_radius":"Thay đổi bán kính trơn",
"ui.fillet_type_choices_tip":"Bán kính không đổi: một bán kính dọc suốt cạnh.\nĐộ dài dây cung: độ rộng ngang đường bo giữ nguyên, bất kể góc gặp nhau của các mặt.\nBán kính thay đổi: một bán kính ở mỗi đầu, và thêm dọc cạnh nếu bạn thêm vào.\nLiên tục độ cong: mặt cắt không làm gãy phản chiếu tại nơi gặp các mặt phẳng (G2).\nSpline: bán kính dọc cạnh theo các bán kính điều khiển bạn đặt.",
"ui.fillet_type_curvature":"Liên tục độ cong",
"ui.fillet_type_tip":"Mặt cắt ngang qua cạnh. Liên tục độ cong: mặt cắt liên tục độ cong (G2) giữa các mặt phẳng, nên phản chiếu đi từ các mặt vào đường bo mà không bị gãy.",
"ui.filter_commands_or_keys":"Lọc lệnh hoặc phím tắt",
"ui.findInTimeline":"Tìm trong lịch sử thiết kế",
"ui.findInWindow":"Tìm trong cửa sổ",
@@ -4827,6 +4948,7 @@
"ui.inspect":"Kiểm tra",
"ui.instances":"Số bản",
"ui.intersect":"Giao nhau",
"ui.iso_4753":"ISO 4753",
"ui.isolate":"Cô lập đối tượng",
"ui.join":"Nối liền",
"ui.joint_play":"▶ Phát",
@@ -4929,6 +5051,7 @@
"ui.part_size_needs_a_part":"Hãy chọn một chi tiết tiêu chuẩn đã chèn (vít, đai ốc, vòng đệm hoặc chốt) để đổi kích thước. Để phóng to hoặc thu nhỏ một thân khối, hãy dùng Thay đổi tỷ lệ.",
"ui.part_size_shared":"Dựng lại chi tiết, thay thế mọi tính năng đã thêm. Tất cả các lần xuất hiện của chi tiết này đều được cập nhật.",
"ui.paste":"Dán",
"ui.patch_continuity_corner_tip":"Mảng gặp các mặt xung quanh với độ liên tục đã chọn dọc theo mỗi cạnh. Tại góc nơi các mặt đó gặp nhau với độ cong khác nhau, mảng giữ tiếp tuyến (G1) ở đó.",
"ui.path":"Đường dẫn",
"ui.pattern_object_type_tip":"Thân khối: các hình đặc, chọn trong khung nhìn hoặc Trình duyệt; mỗi thân được sao chép nguyên vẹn.\nTính năng: các bước trong Lịch sử, như một lần đùn khối hay một lỗ, chọn trong Lịch sử hoặc trên một mặt do chúng tạo ra; bước đó được lặp lại.\nBản phác thảo không phải là cả hai: lặp lại các đường cong của nó bằng Mảng hoặc Lấy đối xứng trong chính bản phác thảo, hoặc đùn khối nó trước.",
| tests/kernel-cases/import/4561-convert-box-mesh-with-a-zero-area-triangle/box-degenerate.stl | SolidCraft contributors | synthetic ASCII STL written by hand: a box with one zero-area triangle, for the kernel regression case of tangency-labs/solidcraft#4561 | MIT OR Apache-2.0 |
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
bherbruck