* Paper scene: kinds of line and their widths by ISO 128-20 (#4890 D2a)
A line's kind (visible, hidden, centre, thin) and a line group give its width in one place:
the standard's series of widths, and a group's wide and narrow lines two steps apart. Nothing
reads it yet; the next commit draws every line on paper from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: every line on paper takes its width from its kind and line group (#4890 D2d)
A view's lines and a dimension's lines are drawn in a line group: a visible edge is its wide
line, a hidden edge, a reference part's edge and a dimension's lines its narrow one, and a
hidden line is dashed 12 line widths on and 3 off. The five width constants that waited for
this go. Every caller draws in the default 0.5 mm group, so today's sheets are unchanged; a
drawing, a sheet and a view choose their own group next.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#12170 added drawing.balloon.repair and drawing.dimension.repair without a
line in tests/kernel-cases/EXEMPT, so the kernel rig's coverage check now
fails on every drawings pull request that runs it ("NO CASE"). Like the
other drawing commands, both are tested in their area's test files
(drawing_balloon_tests.rs, drawing_dimension_tests.rs), so each gets the
same line, in sorted order.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A saved view now keeps the occurrences it draws and the ones it leaves out,
as the snapshot takes them. drawing.view.base, edit and inspect take them; each
follows the parent until a view sets its own, and a copy made alone keeps what
it showed. Boundaries, fitted scales and lines all read them through one rule.
A path whose occurrence was deleted never refuses the file: a hide path goes
quiet, and a view with nothing left is a placeholder that says why.
Replayed onto drawings fd4b7a7bc: the fit and the lines take reference_shown_percent
(the rename of reference_margin_mm in #7316) through shows(); the path limits now live in doc.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A dimension or balloon whose edge, corner or face is lost now lists up to 16 leads, offered and never taken: the
blend face named after a filleted edge, that face's edges, then the faces the same feature made. Lookup still never
writes the record, so undo brings a lost reference back.
drawing.dimension.repair {dimension, slot, pick} and drawing.balloon.repair {balloon, pick} point a lost or
ambiguous reference at a pick of the same kind, on the reference's own occurrence path: same id and paper place, one
undo step, through one shared helper. Only a reference that no longer finds the one thing it names is repaired, so a
dimension's other, still-found reference is kept, and silhouettes repaired onto one cylinder are refused as add
refuses them. A pick takes the forms add takes, so a lead of the slot's kind from inspect passes back as it stands.
The saved format is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The web covered Japanese only (F6): any other script on a drawing was
refused. Now each script the web covers has its own font, fetched once
from the web app's origin the first time a drawing's text needs it:
- kana and Japanese Han: BIZ UDPGothic, as before;
- Hangul and Korean Han: Noto Sans KR;
- simplified or traditional Chinese Han: Noto Sans SC or TC;
- Arabic: Noto Sans Arabic.
Han takes the font of whose Han the text wants (Han::of, the desktop's
rule), so a drawing in English with Han asks for the simplified Chinese
font, as a desktop does; F6 sent all Han to the Japanese font. A text in
two scripts waits for both fonts; one whose fetch failed is refused by
name, and the rest sets. Thai is still refused by name (Hebrew is in the
built-in font).
The four fonts and their licences are unmodified, in assets/fonts/<family>/
with ATTRIBUTION rows, and trunk copies each to fonts/<family>/. Four
files rather than one CJK collection: a session fetches only its own
language's font (4.6 to 8.3 MB), where the collection is one large file.
The folder the web app fetches fonts from is named once (FONTS), and a test
checks that index.html copies each font from its asset into that folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#12152 put an SVG's text back under `svg` in drawing.export's reply and
missed two readers: the delete test that selects a drawing's objects and the
pictures test that draws an image under the views.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
fit works inside the sheet's free space by the same rule as leaves (drawing_view::Room): it takes the
largest preset the border allows, then steps down until the view's box is off the block. A sheet with
no block fits as before; the snapshot, with no sheet, passes none. The default position stays the
sheet's middle.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#10681 renamed the reply's `svg` key to `text`, and that broke the commands'
existing readers: three tests on drawings read `svg` and failed. The SVG goes
back under `svg`; a PNG's base64 stays under `data`. The output schema and the
params doc follow, and #10681's own export tests read `svg` again.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
drawing.dimension.add, with no offset_mm, puts a linear, length or chain
dimension 10 mm on paper to the side of its line away from the material
beside it: it looks half a paper millimetre either way across the line, in
the view's plane, at the depth of what it measures, and asks each shown
body's B-rep exactly (Body::classify_point; inside or on its boundary is
material). With material on both sides or neither, it goes away from the
middle of the view's model box; on that middle, the fixed rule is above or
to the left (+10). Radial, angle, cylinder and silhouette dimensions keep
+10, and an offset given keeps its sign.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The rig's "Every command has a case" check failed on drawings for the ten
commands #11898 added. Each is tested in crates/engine/src/cmd/drawing*_tests.rs,
as the other drawing commands are, so they join them in EXEMPT.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing export: a sheet as PNG at a chosen dpi and colour, and one reply shape (#4890 EX1)
drawing.export {format: png, dpi?, colour?} writes the sheet's scene
through the sheet PNG writer: 25 to 2400 dpi (300 when not given), grey,
black and white, RGB or transparent (grey when not given). dpi and
colour are refused on an SVG. A path must end in the format's extension,
which ExportFormat::extension gives for every format.
One reply shape for every format: text (SVG) or data (base64 PNG) when
no path is given, in place of svg; report.pixels gives a PNG's size. A
PNG held for the reply stops at 64 MiB, as an SVG does, and the refusal
says to give a path; a file may be as large as the sheet needs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing export: a sheet on blue paper, in SVG and PNG (#10679)
One rule for the two papers and their ink, used by both writers. White stays the default, byte for byte. A blue paper's PNG is rgb; the other colours are refused by name. A picture keeps its own colours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A drawing view's setting for how it is drawn (visible lines, with hidden lines, shaded)
was display_style while the viewport calls the same idea its visual style. The field,
its command parameters, its schemas and its replies are now visual_style, on a view's
settings and on its own overrides. display_style is refused as an unknown field, as
drawings haven't shipped and no saved design holds it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A table's column can be left off paper (printed: false, saved only then): the
layout places the printed columns only, while filters and overrides still read
every column. No printed column may read the ballooned row field, and a table
prints at least one column.
A new parts list gets a seventh column, ballooned, not printed.
Drawing::balloons_by_list works out once which list each balloon reads, and
balloons_by_row counts one list's balloons row by row, every row listed, 0
included; drawing.inspect gives parts_lists with each
list's counts. Worked out on each read and never saved.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The view lines' errors were the view DXF's, remedies included, so a drawing
view could say "DXF export cancelled" or "increase tolerance". The module now
answers a Refused (cancelled, over the work or memory limit, across the eye
plane, invalid) that says only what happened. The view DXF adds what to do in
a DXF's terms (hide bodies or sketches, increase tolerance, zoom out), and a
drawing view in a drawing's (raise chord_mm, or choose a smaller scale).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates: the built-ins carry SolidCraft's title block again, so a new drawing starts with it (#3875)
Every built-in template, ISO A4 to A0, is one sheet with the ISO border and
the built-in title block, so drawing.create with no template (iso-a3)
gives a drawing with the block. #7208 made them the border only; the
decision since is that a drawing starts with SolidCraft's block, and a
user replaces or changes the default template.
- A drawing saved as a template is the user's own: a copy of the built-in
with a company's name in the block and its tolerances typed in starts
drawings that keep both (tested through drawing.template.save and
drawing.create).
- The built-in block by name stays, for a sheet without one.
- The general tolerances stay empty, and the five names (iso-a4 to
iso-a0) and the one drawing_template setting stay: the part and
assembly versions would be the same.
- The tests that gave a new drawing the block first no longer do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates by kind: a part starts on A3, an assembly on A2, each with its tolerances note (#3875)
Ten built-ins, iso-a4-part and iso-a4-assembly up to iso-a0-part and iso-a0-assembly, each with its kind's general
tolerances note typed over the title block cell. template::default_for(assembly) is the one rule for the default, and
template::is_assembly says a design that places components is an assembly. drawing.create with no template uses it,
and drawing.template.list marks the design's default and says whether each built-in is an assembly's. The older names
iso-a4 to iso-a0 still read as that size's part template.
Preferences gets one setting per kind in place of the one; a saved name of the other kind reads as the kind's default,
and the old drawing_template key is ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A saved view or a snapshot's scene in visible_hidden now draws its hidden lines,
0.25 mm wide in ISO 128's dashed line, under the visible ones; a reference part in
visible_hidden draws its hidden lines the same way. Paint order from the bottom:
hidden lines, reference parts' visible lines, the model's. The sheet no longer fails
for that style, so it exports; only shaded styles with lines still refuse.
The paper scene's output schema takes a stroke's dash pattern, so a reply
with hidden lines still matches it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom/hlr: per-curve work on worker threads, shared work limits
Silhouette tracing, screen sampling, shadow cuts, classification, coverage and
the crossing search (by grid rows) with crossing refinement run on worker
threads through one ordered map: results go back in item order, so drawings
are the same bit for bit on any number of threads. Options::threads picks the
workers (0 = one per core, small views stay on the calling thread); the
browser build stays serial. Placements sharing a body and a turn share one
silhouette tracing.
Cancellation is polled before every item and inside long ones from every
worker; the first error stops the others; a panicking worker becomes
HlrError::Internal instead of escaping. Ray, curve, crossing, shadow and
coverage budgets are totals over all threads (shared counters; crossing pairs
are counted before the search).
Limits: placements and the default max_tracks are hlr::MAX_ITEMS, which is
section::MAX_ITEMS (also the brep record limit); trim_samples must be 1..=4096.
* docs/drawing-hlr: link the parallel-work PR
* geom/hlr: clearer limits and parallel-work docs, faster thread tests
docs/drawing-hlr.md now separates input limits (with the error each returns:
body records fail with Invalid, not Budget) from the work budgets, names every
budget's error, and states how errors and panics behave on worker threads.
Code comments say the same in plainer terms. The budget and cancellation
tests drop the oblique torus, and the freeform pass of the identity test
compares one parallel run, which keeps the HLR suite under 4 s.
* geom/hlr: poll cancellation inside long items, find spline spans by bisection
Review found two items a worker could run for seconds without seeing a
cancellation: tracing a body with many curved surfaces, and sampling one long
spline (up to 4096 control points). Silhouette tracing now asks before each
surface, screen sampling at every refinement pass, the cuts at left-out faces
every 4096 chords and coverage every 65536 checks.
The long spline was slow because every point and every part hull scanned all
of its knot spans. de Boor evaluation now finds its span by bisection over the
ordered knots, and a part's hull starts at its first piece and stops after
its last: the same spans, so the same bits (checked on the fixture scenes),
and a 4096-point spline edge prepares in 0.9 s instead of 2.2 s and samples
in 0.23 s instead of 1.47 s.
* geom/hlr: poll cancellation while forming and trimming silhouette sets
Review found that forming a body's silhouette sets scanned each face's whole
surface group before the first poll, quadratic in the faces on one surface
(about 4e8 steps for 20 000 faces). The group scan now stops at its first
supported face (groups list faces in order, so that is the same face), the
loop polls every 256 faces, and trimming a traced curve asks before each
face. A cancellation seen while trimming drops the partial curves, even if
the callback answers false later. Output unchanged on the fixture scenes.
* geom/hlr: poll cancellation per boxes met when cutting at left-out faces
Review found that one chord crossing the screen boxes of very many left-out
faces bisects every side without a poll (polls came only every 4096 chords).
It now also polls every 1024 boxes met. The docs state the cancellation
contract precisely: polls are where listed, and the work between two polls is
bounded by the input limits rather than by a time.
* docs/drawing-hlr: say where coverage polls cancellation
* geom/hlr: body records have brep's own, larger limit now
Main raised brep::MAX_ITEMS to 1 000 000 (#3093, which stores whole evaluated
models), so it no longer equals section::MAX_ITEMS. hlr::MAX_ITEMS stays
section's 100 000 for placements and the default curve budget; the docs and
the limits test now say that a body's records are bounded separately, by
brep's limit.
* geom/hlr: a panicking worker stops the others; the ray budget is HLR's own
A worker that panics now sets the shared stop flag while it unwinds, so the
other workers end the phase early instead of finishing work the call throws
away. The docs no longer compare the ray budget with the occlusion work
budget of file.export_view_dxf: the two count different work.
* geom/hlr: an ignored timing test, prepare and drawing timed apart
hlr_timing prepares four bodies, then draws 100 differently turned placements
on one thread, two workers and one worker per core, printing the total, the
phase timings and the ray count. SOLIDCRAFT_BENCH_HLR sets the placement count.
* geom/hlr: timing scenes for sharing and crossings; placements keep their lines when permuted
hlr_timing now starts its prepare clock after the fixtures are built, adds the
same grid at one turn (shared definitions against one per placement) and
sixteen thin bars crossing 8x8 from above, rotates the thread order over three
rounds and checks the drawings match across thread counts outside the timed
part. A new test permutes three placements of one prepared box and removes one:
each line keeps its own placement index, and the boxes' lines stay exact.
* docs/drawing-hlr: the review's limits and fixtures in the parallel tables
* geom/hlr: follow the B-rep record into solidcore-record
The record, its version and its item limit now come from solidcore-record
(#11496): the new tests build their bodies at `solidcore_record::brep::VERSION`
and make a spline's curve with `C3::bounded`, as the other fixtures do, and
the limits table gives the record's own limit, 4 000 000 items, checked by
`brep::check::validate`.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Issue a revision: drawing.revise (#3874 R1)
drawing.revise appends a copy of a row to the issued history: an existing row as
it reads, or a new revision with the texts given, in one undo step. A row is
issued once. The copy keeps what it read through an edit, a hide or a delete, and
nothing is filled in: no date, checker or approval.
Issuing used to make a drawing unreadable, as a copy has its row's id and the
drawing's check refused any id seen twice. Each id now counts once, and issued
ids are unique among themselves.
model_version becomes {path, change}, on issued copies only. One function on the
session answers it, and answers nothing until version control exists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing revisions: numbered 1, 2, 3 (#3874)
A drawing's new revisions are numbered 1, 2, 3, never lettered
(@CamWight, 3 Nov). drawing.set's revision_numbering is {start: 0 or 1},
the first number. A revision typed by hand is kept as typed; the next one
follows the highest number, and drawing.inspect says where numbering
starts. A record in letters is refused (drawings haven't shipped).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Revision tags on a sheet: add, edit and delete (#3874 R3)
A tag gains the sheet it sits on and its place there. drawing.revision.tag.add,
.edit and .delete keep them, inspect and every revision reply list them with what
each shows, and a sheet's delete counts and takes the tags on it. A deleted row
still leaves its tags showing the revision they had. Tags draw on paper once scene
text lands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Saved tables on a sheet: drawing.table.add, .edit and .delete (#3874)
A drawing saves its parts lists and revision tables, each on a sheet with its
definition and place. Rows are never saved. A parts list starts at the top right
listing what its sheet documents, else the design; a revision table at the bottom
left; headings on top, QTY, rows of 7 mm.
Placing a list saves the numbers its view shows, once per view, so what is printed
doesn't move. Numbers are the design's: undoing the placing puts back only the
drawing, as every drawing step does, and the numbers stay. That one command changes
both, and the proof that nothing needs evaluating now allows it.
The tables are a ById list, as the balloons and images are, and keep its rules: at
most 1000, listed by id. Revision tags take their own id type.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A balloon reads its row in a parts list (#3874 L1)
A balloon can name the parts list it reads; else it reads its sheet's only list,
else the drawing's only one, else none, with the choices listed. Its row's item is
worked out on each read and never saved: drawing.balloon.inspect gives item and
row_status (ok, no_list, reference, no_row or not_found). A lost row never removes
the balloon. A list's delete reports the balloons that named it and clears their
links.
Bom::item_of cuts a path from the top of the design to start below the assembly
listed, and row_of is no longer test-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Notes on a drawing: the record and commands (W19e, #4896)
A note sits on a sheet, a view, or an edge or corner of a view's model, saved by
name as a dimension's is, with the title block's text and fields, its place and
its text height. drawing.note.add, .edit and .inspect, one undo step each, no
model evaluated. Its one leader is worked out, never saved: a lost reference keeps
the note and its text, with no leader. Anchor is one type so other symbols placed
on a sheet can use it.
A view's notes go with its copy and delete; a sheet's with the sheet. The plan left
delete for later, but selection.delete now handles a drawing's objects, so notes
join it. Balloons and notes share Lookup::middle. Drawing them waits for text in
the paper scene (slice 12).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Picker::placed, face_corners and BodyEdges::new decide with the display mesh.
They are listed on this branch only and must be cleared before drawings lands
on main, where the list takes no new lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The kernel rig's coverage check exempts the drawing and bill of materials
commands, each naming where it is tested. The mesh decisions check follows the
view line modules to mesh_lines/, and skips the two that only draw and count a
drawing's view lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: constraint icons stay while the sketch fills the view (#10518)
Constraint glyphs hid as soon as a millimetre of the sketch plane drew smaller than two pixels
(#8980), whatever the sketch's size, so a 500 mm sketch zoomed to fit lost every glyph although
it still filled the view. Below that scale the glyphs now hide only while their anchors span
less than twenty glyphs (300 px) on screen: a small sketch far away still loses them, a large
one that fills the view keeps them. The preference "Hide constraint glyphs when zoomed out" is
unchanged; off, glyphs stay at every zoom as before.
Test: constraint_glyphs_hide_when_zoomed_out adds a 500 mm sketch that keeps its glyphs zoomed
to fit and loses them far away; glyph_zoom_tests covers the span threshold.
* Sketch: glyph span measures only drawn glyphs and stops at the threshold (#10518)
The span check now walks the same constraints the glyph pass draws (one MidPoint glyph per shared midpoint, a pattern's constraints once) and returns as soon as the bounds reach MIN_GLYPH_SPAN_PX, so a large sketch zoomed out costs no more than before.
* Sketch: filter glyph constraints lazily, midpoints in a set (#10518)
* Sketch: measure the sketch, not its glyph anchors, before hiding glyphs (#10518)
* Sketch: collapse the midpoint check into one if (#10518)
* Labelled measurements on a view's snapshot (#5866)
measure: linear, aligned, angle from model points, radius from an edge, with
units and decimals for the labels. No new maths: drawing_measure's rules, and
a dimension's radial rule through one Lookup::whole_arc. Labels go through one
function, reading_label, which dimensions' text now uses too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pieces on one circle are that circle, and one piece is that edge (#4892)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A dimension between two flat faces (#4892)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A suppressed or failed feature's references say so, not lost (#4892)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Labelled measurements on a view's snapshot (#5866)
measure: linear, aligned, angle from model points, radius from an edge, with
units and decimals for the labels. No new maths: drawing_measure's rules, and
a dimension's radial rule through one Lookup::whole_arc. Labels go through one
function, reading_label, which dimensions' text now uses too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pieces on one circle are that circle, and one piece is that edge (#4892)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The raster walked a triangle's whole box, testing every sample, and the pixel budget counted that box.
A plain plate's few long triangles have boxes that are mostly misses, so a view at 2:1 counted 18 tests
a sample. Now each row of the box tests only the span the triangle can touch there, and the budget
counts those spans (an empty row costs one unit, as the walk does).
row_span works the span out from each edge's weight along the row, allowing for the test's own
tolerance and the rounding of its arithmetic, so it is never short; sample_weights is the raster's test
pulled out unchanged. Pictures are the same to the byte. A product image shares the raster and the
count, so its 128 M admits more; the tests built on its old count hold more triangles.
With the misses gone nearly every counted test paints, and a painted surface costs about 240 ns a
test on one thread, so a picture's limit falls from 400 M to 250 M to stay near a minute at worst.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each dimension of a view on the sheet is one group, ObjectKind::Dimension,
after the views: extension and dimension lines and filled arrowheads
(Terminator::place, #9466), laid out by dim_layout_sized in paper millimetres, so it is the same size at any
view scale. All seven kinds draw; a chain is one line of frames at one offset
with each extension line once, an angle sits where its lines meet on the view,
and a cylinder's line runs across its silhouettes at the end on its offset's
side.
drawing.scene and drawing.export list each dimension: its status, whether it
is drawn, and why not. A lost one, or one on a view that isn't drawn, has no
lines and leaves the sheet and the file written. The provider keeps each
dimension's group by its record, world state, view drawing and units: a moved
view moves them unread, and an edit reads that dimension alone, in one short
step after the views. Text joins with B1.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11303
* Keep Browser and History row interactions independent
* Browser tests: use solidcore_record::Vec3 after the layer split
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
rfd opens file dialogs through the XDG desktop portal and falls back to zenity
when there is none. The flake's package didn't bring zenity, so on a system
without a portal or zenity, Open and Save showed nothing. The wrapper now adds
nixpkgs' zenity at the end of PATH, after the system's own.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: show complete point coordinates (#11069)
Render measurement item details as wrapping text instead of fixed-height cells. Keep the existing values, units and precision. Add a regression test in the existing measurement UI test module.
Local validation: the regression test compiled, but the Windows GNU test binary crashes with 0xc0000005 even for --list, before tests run. Runtime verification and visual evidence remain pending; this contribution is a draft.
* Keep repository LF line endings in the coordinate fix
* claim: #10994
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare Bodies: input and output schemas (#10994)
inspect.compare gets a typed contract and reply types in
schema/compare.rs and leaves unconverted.txt. Each key reads as the
handler reads it, with its message; `color` checks each colour with the
handler's own color_param, now pub(crate) and re-exported from cmd. The
reply is built from Comparison and its parts, with the same JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare: drop the json import the typed reply no longer uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare schema: colour strings carry the hex pattern
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11362
* Settings profiles: export and import go through vfs, inside an agent's folders (#11362)
settings.profile.export and settings.profile.import read and wrote their
path with std::fs, so the folder scope an MCP request's allow_paths sets
up never saw it: an agent could write a profile anywhere, or probe any
path. Both now go through vfs (len, read_to_string, write), as file.export
and ui.screenshot do. requests_with_allow_paths_stay_inside_them covers
export and import inside and outside the agent's folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Edit reopens the dialog from the section's own geometry (Show viewport
section status, on by default): the plane is kept as numbers and nothing
is picked. The arrow was placed from the first pick only, so it was gone.
With nothing picked, it now stands on the kept plane, its tip at the cut.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11455
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render stage: input and output schemas for Ground, Backdrop and Clear (#11455)
The three handlers' strict parameter types move to schema/render_stage.rs as
GroundParams, BackdropParams and ClearParams, with descriptions and
JsonSchema, and become the contracts; the handlers read the same types. The
handlers build the shared StageSaved reply instead of json! literals, and the
saved setup is serialized with an error instead of json!'s panic path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7896
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Isolate a body: other components are hidden as components, in one step (#7896)
Isolating a body hid every other body one by one: browser.visibility with `items` writes only
hidden_bodies, so every other component's Browser row kept an open eye and normal text, and
its eye could not bring it back (the first click hid an already invisible component).
browser.visibility takes `isolate: true` with `items` (bodies), as it does with `paths`. The
picked bodies' own placements stay open, their other bodies (and the root's) are hidden one by
one, and every other placement is hidden as a placement. Isolate in the Browser and the view
runs that one command, so it is also one undo step instead of two.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Isolate a body: a hidden Bodies folder or group it is in shows again (#7896)
Isolating a body inside a hidden Bodies folder or group left that folder or
group hidden, so the picked body stayed hidden. Isolate now shows the
folders and groups (with the groups they are in) that hold the picked
bodies; their other bodies are hidden one by one as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Isolate a body: look for hidden folders only when some are hidden, and find body owners once (#7896)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Box, Sphere and Torus: a sketch point picks where they go (#9403)
The Point input of the Box, Sphere and Torus windows took a vertex, a point on an edge or face
and the origin, but not a sketch's points, so a sphere could not be centred on a point drawn in a
sketch. It now takes the points of every shown sketch (POINTS | EXTERNAL_POINTS, as Measure
does): a click fills X, Y and Z with where the sketch puts the point in the world, and a point
selected before the window opens places the primitive there, as a vertex does. The input's chip
names the point and its sketch as Select Other does ("Point 2 · Marks").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box, Sphere and Torus: the sketch point chip label for every complete locale
Main's i18n check wants each message in the complete catalogs (ar, he, ja,
vi, zh); the label has no words, so each carries the same "{point} · {sketch}".
With main's new selection kinds and this one, every Sel variant has its arm,
so the catch-all arm is unreachable (clippy) and goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Primitive at a sketch point: a point picked in the sketch being finished still places it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
document.metadata, document.metadata.set and document.metadata.remove
get input and output schemas: contracts in schema/metadata.rs, checked
in front of the unchanged handlers, and reply types the handlers now
build their replies from. Their lines leave unconverted.txt.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A Georgian catalog (assets/locales/ka.json) carrying every English message,
registered in crates/ui-egui/src/i18n.rs, with a row in the new-language test,
a pending attribution file and a terminology note in docs/localization.md.
The catalog is Mkhedruli only; egui's built-in Hack already draws it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11222
* Render: the progress row keeps Cancel whole (#11222)
The progress card is an egui area, laid out within last frame's size. When
the status grew (9 % to 10 %, a longer phase or name), the caption and the
Cancel button were truncated, down to "..." with a long shot name.
progress_action now takes the name and the status apart and gives each part
an explicit width from the room the caller offers (the canvas for the
floating card): Cancel and the status always show whole, a long name is cut
with an ellipsis (full name on hover), then the meter narrows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11527
* Agent chat: a text selection dragged past the edge scrolls the conversation (#11527)
Holding a text selection near or past the top or bottom of the conversation
scrolls it, faster the further out, so a long answer can be selected in one
drag. egui scrolls a label's selection only for the label under the cursor, and
not at all for a table, whose label sits in its own horizontal scroll area.
egui also leaves a label out of the text selection while it is scrolled out of
view: a selection whose start had scrolled away was dropped, and Copy missed
the hidden text. The conversation's labels now take part out of view too,
clipped to nothing, so they keep their end of the selection and give their
text to Copy without being drawn or moving the selection.
* Agent chat: only a drag towards the edge scrolls the conversation (#11527)
A press on a label creates an empty selection on the press frame, so a click,
a double click or a held press on the line by the edge scrolled the
conversation, and so did the start of a drag from there inwards. Scrolling now
waits until the pointer has moved more than 8 points towards that edge since
the press.
* Agent chat: approval titles and pending messages keep a selection scrolled away
They were plain selectable labels, so a selection that started in one was dropped
once its label scrolled out of view, as in the rest of #11527. They now use the
same off-screen-aware label as the conversation's text.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #11483
* Interference: intersect and mesh each overlap on a kernel worker (#11483)
Compute in Inspect > Interference intersected each overlapping pair and
meshed the shared volume on the window thread. Its stack is 1 MiB on
Windows, too small for the kernel's recursion, so the app could close
without a crash message. Each pair now runs through
kernel::map_with_local_pools, on a worker with the kernel's 8 MiB stack,
as inspect.interference and inspect.clearance already do.
* Interference: Compute checks off the window thread (#11483)
On 0.30.0 the report's two parts took the window thread 95 s (x64) to
154 s (x86) in the overlap boolean, and the window stopped responding
until the app was closed. Compute now runs inspect.clearance and the
shared volumes on a copy of the session, on a kernel thread, when the
app runs commands off the window thread (as Find Limits does). The
dialog shows the elapsed seconds with Cancel meanwhile, and drops the
reply of a design changed since.
* Interference: Cancel on its own row while Compute checks (#11483)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
A cut that leaves a body in pieces names them after their faces
(`order_lumps`): the piece whose least face name sorts first takes the
first name, and so on. It moved the names but left the pieces where the
kernel put them. The session then pinned the feature's body names in
that state order, and the next full evaluation (opening the design, or
editing a parameter upstream) handed them out again in a different
order: two pieces swapped names, and a later feature that named one met
the other. Found by a local model fuzzer.
The pieces now also take the family's places in name order, so the
names pinned are the order the next evaluation hands them out in. A
design saved before keeps the names a fresh evaluation gave it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A through-point 0.0000001 mm from the start made an infinite line whose
direction nothing held, and a Line that short had both ends connected to
the origin, a line of length zero. Both now refuse points closer than the
distance at which a new point is connected to an existing one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Design tabs: the tooltip says when a saved design has unsaved changes (#11408)
A tab marks unsaved changes with a bullet after the design's name, and a
long name cut short by the tab hides it. The tab's tooltip, which says
where the design is saved, now adds "Unsaved changes" below for a saved
design with changes not saved yet. A design never saved already says
"Not saved yet". The new string is in a pending locale file, with ten
translations taken from the same words elsewhere in the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Design tabs: the unsaved line in every complete catalog (#11408)
Arabic, Hebrew and Vietnamese are complete catalogs, which must carry
every English message: they get the words they already use for
"Unsaved changes" elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Recovery: the save test waits for the autosave worker before it checks
* Recovery: the save test waits for the autosave worker before it checks
saving_drops_the_entry_and_a_clean_close_leaves_nothing marked the
session saved right after the tick that started an autosave. Under load
the worker was still writing, so the next tick found the write running,
took nothing up and dropped nothing; the file landed afterwards and the
check that it is gone failed (seen in CI on #9021).
The test now ticks, bounded, until the autosave has caught up
(Autosaver::caught_up), as the app's own frames would, before it marks
the session saved. A small helper in the test module does this. The
app's behaviour is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7246
* feat(sketch): enter a dimension's value in a small window with step arrows (#7246)
* Dimension window: fit the layer split, and keep the wheel off the camera over the window
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11171
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test that a line starts on a snap point of an existing shape (#11171)
The Line tool's first click on a line's midpoint, a circle's centre or edge,
a rectangle's edge or a point part-way along a line starts the line there and
ties its start to that shape. In 0.30.0 and 0.30.1 the start was dropped on the
next hover (fixed by #11184); this covers each shape the reports name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic: viewport term in the Appearance section heading, desktop app badge, deeper-overlap note in Find Limits
* Arabic: drop the stray direction mark and match the Refresh wording in the old Node.js note
* Arabic: tanween in the thread fit hint, tap drill wording, crease term in continuity, spline label and setback wording in the fillet help
* Arabic: sweep and boolean terms in the body check note
* Arabic: badge term for the status chips note and summary wording for Fold items in Graphics preferences
* Arabic: tanween, catalog terms and clearer labels in the Assistant, Design and Tools preferences
* Arabic: tanween in the shortcut key prompt, Look At wording in the Assistant follow help
* Arabic: complete the Several choice for bodies folders and use a verb form for the dialogs Open row
* Arabic: orbit style term, Select Other and center-point arc names in Sketch preferences, place-from-origin wording, tanween in the radial menu help, tap makers in the tap drill notes
* Arabic: graphics device term in the blur notes, boss and turn wording in the fillet corner option
* claim: Properties: hold the measuring worker in tests until the card is checked
* Properties: hold the measuring worker in tests until the card is checked
open_object starts the measurement on a worker and looks for the reply
once without waiting. Under load the window side could be held up
between the two, the reply was already in, and two Properties tests saw
the card filled where it should still be measuring (about 0.3 % and 4 %
of runs with 18 tests at a time).
measure_beside now runs a hold before sending the reply. In tests it
waits on the app's existing apply_gate, which feature evaluation already
uses for the same purpose; outside tests it does nothing. Both tests set
the gate, check the card is measuring, then let the worker go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11726
* MCP list_commands: ask for commands by id prefix or panel, ids and labels only, or a page at a time (#11726)
list_commands answered with the whole catalog, every key of 575 commands
(about 350 KB), and could only narrow it by a substring. It now also takes
`prefix` (start of the id), `panel` (a whole panel or tab name), `compact`
(id and label), `fields` (the keys to keep) and `limit`/`offset` (pages, as
{commands, total, offset, next_offset}). With none of them the reply is the
same as before. A batch step naming list_commands narrows the same way, and
a bad argument is an error that names it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10437
Co-authored-by: Cursor <cursoragent@cursor.com>
* Lip: say Shell first when the face is not a rim (#10437)
A solid box top left OK disabled with a vague shelled-body hint. Name Shell and the rim-around-an-opening requirement in the refusal, the dialog tip, and the command help.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Lip: keep the dialog hint as it was, match the new refusal text in the test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10981
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Match Surface: input and output schemas (#10981)
surface.match gets a typed contract in schema/surface_match.rs and the
shared FeatureResult as its output, and leaves unconverted.txt. Each key
reads as the handler reads it, with its message; like solid.scale it
declares `name` and `participants` itself, since a match makes no body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Follow main's kernel merge: world_state and the shared continuity reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Surface match schema: Vec3 comes from solidcore_record now
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #11036
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Physical material property commands: input and output schemas (#11036)
material.properties.validate and material.properties.directional get
typed contracts and reply types in schema/material_properties.rs and
leave unconverted.txt. The card stays the handler's to check; the
direction has the handler's messages. The replies mirror the document's
Validation and DirectionalModulus, destructured in full.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Feature editor: a roll back's re-solved placements are not a changed design
Rolling the marker solves the joints again and stores where that puts each occurrence, so the
editor's pinned original differed from its source there and OK was refused with "the original
editor model does not match its source design". The check now takes the placements as the roll
leaves them.
* Feature editor: also accept the ratio and lift of coupled joints that rolling the marker works out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11051
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clearance: input and output schemas (#11051)
inspect.clearance gets a typed contract and reply types in
schema/clearance.rs and leaves unconverted.txt. Each key reads as the
handler reads it, with its message; MAX_CLEARANCE and MAX_NEAREST move
to the schema module so both read one limit. The reply is built from
Clearance and its item types, with the same JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #6173
* Inspect: center of mass reports the same volume as measure (#6173)
inspect.center_of_mass measured each body's display mesh, whose flat
facets cut curved faces short, so its volume and centre differed from
inspect.measure's (a sphere of radius 10: 4183.10 vs 4188.49 mm3). It now
takes both from the same cached kernel measurement Measure uses, and like
Measure it leaves out bodies that enclose no volume, counting them in
open_bodies_skipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Centre of mass tests: read the skipped list that main now returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* 15 languages: translate the 21 messages main gained after batch 4 (batch 5)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locales: drop the strings the catalogs already have
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Modeled threads: run down to a flat shoulder so a nut can bottom out
An external thread running the whole face stopped with its groove clear of
a shoulder, leaving up to a turn uncut above it. The groove now runs on past
the plane of the face's end and is trimmed there, so its root reaches the
shoulder at every angle and nothing past the plane is cut.
A shoulder rising back along the face keeps the square stop, as do internal
threads, tapers, runouts and lengths stopping short. Where the kernel refuses
the trimmed cut, the groove also keeps the square stop and the feature warns.
Closes#11610
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel ladder: record the thread cases that now reach their shoulder
Six cases gain the faces of the trimmed last turn; every other case is
unchanged apart from its timing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Thread at a shoulder: review fixes, and a test of the fallback
The shoulder check starts just off the face, as the free-end check does, so
a slope rising from the face counts. A groove the trim leaves nothing of now
falls back to the square stop too. A test forces the fallback and reads its
warning. The ladder's order and report go back to main's, changed only for
the cases this moved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Thread at a shoulder: check all the radii the groove cuts
The check for a shoulder rising along the face looked a fixed distance out,
which falls short of the groove on an undersized shaft. It now covers the
groove's reach. A test reads how each kind of shoulder is classified.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Thread at a shoulder: test the trim that leaves nothing of the groove
The test now reaches the path where the half-space keeps nothing, which is
the one that must fall back to the square stop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Thread at a shoulder: say so when the shoulder can't be checked
If the kernel can't make the rising-shoulder check, the groove keeps the square
stop as before, and the feature now warns that its last turn is left uncut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib wrapper: a swept or mitred turn for constant rounds (Turn)
Brep::blend_dropping takes a Turn: Mitre (the default, as before) or Swept,
which sets solidcore's FilletSession::set_swept_turns before the corners are
made. A swept turn solidcore refuses at CreateFilletCorners comes back as
Error::TurnRefused with its reason and place (NoRoom at a concave side edge,
else CornerUnsupported). Swept is for Blend::Round only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel: fillet rounds turn in a mitre or swept (FilletTurn)
fillet_removing, fillet_max, fillet_max_each and fillet_each take a
FilletTurn and hand it to SMLib, through the reblend of earlier rounds at a
later corner too. A swept corner solidcore does not build is refused as
invalid input with its reason and place: no smaller radius builds it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Design: a fillet saves its turn, mitre (default) or swept
FeatureKind::Fillet gets `turn` (FilletTurn: mitre, the default and not
saved, or swept), one pending format file. Evaluation hands it to the kernel,
pattern copies included, and refuses a swept turn with a style, fit, corner
or setbacks the kernel's swept corner does not take (SWEPT_TAKES).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* solid.fillet: the turn parameter, and the command's input and output schemas
`turn: mitre|swept` on solid.fillet, refused when unknown or with options a
swept corner does not take. solid.fillet now has its contract (FilletParams)
and reply type (FilletResult), registered with checked!, and leaves
schema/unconverted.txt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet dialog: a Turns choice, Mitre or Swept
A Constant radius fillet's Turns row sends `turn: swept`; choosing a narrowed
radius or a curvature corner puts it back to Mitre, and Swept puts those back.
Its tooltip says what each does where two rounds turn round a corner edge.
New strings in a pending locale file (en, de, ja, ko, zh); glossary entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet turn: the schema tests' fixes and the complete catalogs' strings
The no-contract example in the schema tests is solid.chamfer now that
solid.fillet has one; the reply test checks the mid-radii form against the
contract (solidcore refuses that law's corner yet, #430) instead of building
it; Arabic, Hebrew and Vietnamese, complete catalogs, get the new strings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet schema test: variable and spline forms checked against the contract
solidcore fails a variable round on a box edge at this pin (status 1001, as
variable_radius_on_a_box_edge), so the reply test checks those forms against
the contract instead of building them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet turn: the swept rig cases pass; the MCP no-contract example is solid.chamfer
cov-fillet-turn-swept-boss-base-r1 and
cov-fillet-turn-swept-pocket-sharp-corner-refused-r1 pass now that
solid.fillet takes `turn`: off the rig's known-failing list. The MCP bridge
test's example of a command without a contract was solid.fillet, which has
one now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3683
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Selection fields: remove one picked item from the dialog (#3683)
A dialog field that takes several picks (edges for Fillet, Chamfer or
Flange, faces, bodies) showed "N selected" with one x that cleared them
all. It now has the kit's disclosure arrow beside that x: open, it lists
the picked items by name, each with its own remove button (the rows
Sketch Modify dialogs already used), in a short scroll area. Removing an
item works like picking it again to toggle it off: the hand-picked edges
of a Fillet and the explicit profile choice of Extrude, Revolve and
Emboss follow. The x still clears everything and folds the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Selection fields: hovering a picked row lights its item; every multi field lists alike (#3683)
Review follow-up. Hovering a row of a dialog's picked-items list, or its
remove button, lights that item in the view with the normal hover shading
(and not as picked): faces, edges, vertices, profiles, planes, axes and
sketch geometry as the hover, bodies, components and features as their
Browser and timeline rows light them.
Every multi-pick field now has the same folded list: Sketch Modify fields
lose their always-open list for the shared toggle, and Shell with Tangent
Chain lists the faces its chip counts (removing a face its chain brought
takes out the pick that brought it). Removing a row works as picking the
item again: a rim or surface split into pieces is one row and goes whole.
Tests cover removing a row from Combine, Loft rails, Sweep path, Blend To
edges, Rigid Group components and pattern features: the preview's
commands follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Selection fields: build on main's fallible world state; Sketch Mirror's label test opens the list (#3683)
The world state is now a Result on main: the remove and hover paths treat a
failed one as nothing to remove or light. The Sketch Mirror label test from
#10770 opens the picked list first, as this field now lists its picks behind
the arrow like every other multi-pick field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selection fields: removing a Tangent Chain row takes out the pick that brought it (#3683)
With Tangent Chain on, a Fillet's list shows every edge of each picked
edge's chain. Removing one of those rows left the picked edge behind, so
ticking Tangent Chain off and on brought the chain back. The row now goes as
picking it again would: with the picks whose chain holds it and their whole
chains. A Shell row whose model can't be built goes on its own instead of
silently staying.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Planar sources: decide coplanar faces by support group, no budgets that drop sources
map_planar_sources kept two budgets, `metadata` (2 MB) and `identity_bytes`
(16 MB), charged by each face's source descriptor and by every extra
candidate on its plane. When one ran out, faces silently lost their source
and with it their persistent name: a 300-hole plate whose top a comb of
grooves cuts into 62 strips lost the cap source from strip ~47 on.
The budgets bounded the real cost: each result face looked at every
candidate on its plane, faces x candidates when many faces are coplanar.
The candidates are now grouped by support once (`same_support` against
each group's first plane, through the existing PlaneIndex), each group's
chosen source, ambiguity and inner flag decided once, and the faces
without a role together with the competing tool faces grouped the same
way. Each result face then looks up its plane's few groups. The decision
is the old one: blocked by an unknown or competing support, else the
first candidate on the plane unless another candidate there has a
different plane, source or role.
Work: grouping looks at each candidate's index window once per group
(each candidate is assigned on its group's first look), and each face
looks at the group representatives near its plane, so the planes looked
at grow with faces + candidates. A counter (`looked`) checks it: n
pieces of one cap and n faces on its plane take exactly 2n looks (n*n
before), 3n with n blocking supports.
Tests: the holed plate keeps the cap source on all 62 strips and the
bottom (fails on the old code: face 352 lost its source); the existing
planar source tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Extrude: an ellipse or a spline sketch curve sweeps one wall
An extruded ellipse had four side faces (`F2:side:e1#1` to `#4`), one
per conic quarter, and a spline one per span: the profile holds such a
curve as several exact segments and SMLib got each as its own curve.
The Extrude feature's builder (`extrude_whole_sides`) now takes a
`one_curve` test from the caller. Each run of free-form segments of one
degree that it says are one curve goes to SMLib as one B-spline: the
Béziers' control points in a row, knots repeated the degree times at
each joint, each span as long as keeps the speed through the joint the
same (so the curve is C1 there and SMLib makes one face over it, as it
would not over a C0 parametrisation), weights scaled to meet. Exact: the
same curve, reparametrised. A loop starts at a run's start, so no run
wraps round it. The wall's history lists every piece, and its
construction source is its first piece's (as joined collinear lines).
The document says which segments are one curve: ExactSketchCurves now
also holds each free-form sketch curve's exact segments
(`find_free_form`: a segment that is one of them, either way round), and
the profile roles use it, so the wall is named `side:<curve>` from its
history rather than by the curve nearest its mesh centre.
Saved designs rebuild with these walls renamed (`F2:side:e1#k` ->
`F2:side:e1`); accepted, no alias kept.
Tests: kernel `pieces_of_one_curve_extrude_into_one_wall` (an ellipse in
four conics is 3 faces, its volume pi a b h to 1e-6, the wall generated by
all four pieces; a 3-span spline closed by lines is one wall; the same
solid as a face per piece); doc
`an_extruded_ellipse_or_spline_is_one_wall_named_by_its_curve` (one
`F2:side:e1`, no piece names, the same names on a second build and after
reopening).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Tests: a tray's far rim name is checked on the exact B-rep face
The tray test took the point `sheet:...:rim.far` finds as right when it
lay within 1e-3 mm of the strip z = 30, 199 <= y <= 200: a slack sized to
the mesh. It now asserts on the face the name finds, on exact geometry:
the point's distance to that face's surface (FaceSurface::nearest) is
within rounding at the part's scale (1e-12 x its size), and the point is
inside the face's boundary, counted by crossings of its record edges
(each asserted to be a line, the rim being planar).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Tests: delete tests/naming/, the records no test reads since the naming corpus stopped comparing against them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Viewport test: smooth wall joins drawn from eight G2 spline walls
The PR extrudes each spline or ellipse sketch curve as one wall, so the
offset-ellipse ring the test built has no joins between faces any more.
The test now extrudes a circle drawn as eight cubic splines: eight walls
meeting with one curvature along eight upright edges (24 edges in all).
It still checks that those joins are left out of the shaded view, drawn
in the wireframe and selectable as edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: 009 and 012 record the one-wall extrude (an extruded spline or ellipse sweeps one wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Bumps the version to 0.40.0-rc.2 and folds the pending format changes into format 50. A published pre-release no longer reaches the Flatpak feed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`Seg2::mapped(f, arc)` is a segment under a map of the plane that keeps shapes. Points go
through `f` itself (an arc's centre, every control point). `ArcMap { angle, mirrored, scale }`
says how the map moves an arc: it turns it by `angle`, after a mirror across the x axis when
`mirrored` (start `angle - start`, sweep reversed), and scales its radius by `scale`.
`ArcMap::turn(angle, mirrored)` keeps lengths; `ArcMap::rigid(f)` measures a map of points that
keeps lengths, from where it puts the origin and the unit axes, with a scale of exactly 1.
`Seg2::similar` and the three arc maps written out by hand use it:
- a sheet-metal region onto a panel's flat (`region_to_flat`, which measured its map by hand and
now asks `ArcMap::rigid`);
- the mirrored flat (`flip_x_loop`);
- a sketch region mirrored in its x axis (`mirror_y`).
The points go through the same functions as before, so every result is the same, bit for bit.
This comes from the architecture review of the drawing work (2026-10-25): four places wrote the
arc rule out, each its own way, and one measured its map by hand.
`map_controls` is private to geom now: on its own it hands an arc back unmapped, which is what the
three hand-written arms were there to avoid.
Tests: every kind of segment under a mirrored map with a turn, a scale and a shift, point by point,
its length scaled and an arc's sweep reversed; the three old formulas, bit for bit (the sketch
mirror keeps a +0.0 start's -0.0); a rigid map's turn and mirror measured whatever its shift, and
the identity; the sheet-metal and mirror tests unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: a page that hands designs saved at the old address to app.solidcraft.io
The stable web app moved from docs.solidcraft.io/app/ to app.solidcraft.io, and a browser keeps
storage per address, so designs saved at the old one don't appear at the new one. The docs site
gets app-transfer.html: framed by the move page at app.solidcraft.io it answers that page's
requests, and opened on its own it offers each design as a file. It only reads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: name the browsers the one-step move was checked in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-smlib held one process-wide kernel lock for the whole of every
solidcore call, so a long call in one design (a modeled thread, a fillet)
held up every kernel call in every other design, even after its tab was
closed, and a call that never returned held them until restart.
Each call now takes a kernel from a pool and the lock is only held to take
or put one back. Calls one after another get the same kernel as before; one
that starts while another runs gets its own. Each kernel has its own range
of procedural blend serials, since a body keeps the serials of the kernel
that made it.
History commands and delete checks now belong to their design: they wait
with its tab, go when it closes, and can't land in another design. An
agent's command for a design that left the window is refused at once
instead of holding up the requests behind it.
Closes#11681
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch dimension: typing replaces the proposed value (#11204)
* Sketch dimensions: typing replaces the proposed value until you move the caret (#11204)
The value box selected the proposed value only on its first frame. A frame
in which the field misses the keyboard collapses egui's selection to its
caret, so typing 400 over a proposed 40 mm could give 40040 mm (seen in a
WebView2 host). Now every frame starts with the whole value selected, before
the field reads its state, until the person takes the value over: typing, a
completion or reference, a key in the box, or a press into the box after it
stayed in place. The click that placed or pinned the value does not count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: one heavier, evenly detailed icon set for the page tabs
* Build: import traced body records from their new owner
* Build: read exported kernel records from their new crate
A run's glyphs count once in a scene's records, for a writer that embeds its font, but the
walk onto a writer's grid copies every placed glyph's whole outline, so a sheet dense with
text could reach any size. The walk now counts the pieces it places and refuses a scene past
MAX_GRID_PIECES (1 << 22), saying to move some text to another sheet. place() is public so
a writer that draws text as outlines (PDF) counts with the same rule.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
document.units gets input and output schemas: `units` (mm, cm, m, in or
ft, with the handler's messages for a missing or unknown unit) and its
reply, `units` and `kept`, which the handler now builds from the reply
type. Its line leaves unconverted.txt.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Threads: a 12 mm hole takes M12, and a modelled thread narrows a bore that is too wide (#11609)
Automatic sizing of a hole now takes the size whose nominal diameter the hole has (a 12 mm hole
is M12, not M14, the size whose tap drill is 12 mm); a hole near no nominal diameter is still
matched by tap drill. A modelled internal thread in a hole as wide as the thread or wider no
longer refuses with "too wide": the bore is filled in to the thread's minor diameter over the
threaded length and the groove cut there, and the feature's warning says so. A size that does
not fit the hole names the size that does.
A saved thread with no designation keeps the old rule through a pending format step, so an
existing design rebuilds with the size it had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Threads: keep an old automatic size through edits; kernel-rig cases expect the narrowed bore (#11609)
Editing a saved automatic thread keeps `old_auto_size`, so it does not change size. The five
kernel-rig cases that expected a modelled thread in a hole as wide as the thread to be refused
now expect the narrowed bore, with the volume worked out analytically in each case. The thread
dialog's reopen pattern names the new field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Thread dialog test: a 5 mm hole is suggested M5, its nominal size (#11609)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Typed schemas for Appearance, Appearance Library and List Appearances (part of #2829)
appearance.assign, appearance.library and appearance.list get contracts
that read what their handlers read, with the handlers' messages, and
reply types the handlers build their replies from. Their lines leave
unconverted.txt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Appearance library: the opacity is already a number
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a copy of a title block on the drawing border, saved with the sheet (#3875)
`Sheet.title_block` holds a copy of its definition, as `border` does. Each sheet's check lays it
out on the drawing border, so a sheet without a border, a block wider or taller than the border,
or a change of paper that leaves no room is refused. `drawing.sheet.add` and `drawing.sheet.set`
take `title_block` (a definition, or null for none), a new sheet takes the block of the sheet it
follows, and `drawing.inspect` lists it. A sheet without a block saves no `title_block`, so an
older drawing reads as having none (pending format file `sheet-title-block.rs`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: the built-in title block, on every new drawing (#3875)
`title_block::default_block()` is the 180 x 54 mm block of twelve cells approved on #3875, with
the legal owner read from the drawing's `organization` and the general tolerances as text to
change. `drawing.create` starts its sheet with it. The geometry tests read the built-in block
instead of their own copy of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a title block's lines on paper, drawn after the views (#3875)
`TitleBlockLayout::paper` draws the outline, then every cell edge inside it, each once:
neighbours' shared edges, and edges that meet along one line, are one stroke. The sheet scene
paints the block after the views, and counts its records with the border's, so no view takes
its room. The view tests' drawing leaves the block off, so their scene is still the border and
the views.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: the title block's projection symbol, in the drawing's projection (#3875)
ISO 5456-2 (Annex A): a truncated cone and its end view, h across the cone's
small end from table A.1's sizes (3.5 to 20 mm), the largest that fits the
cell, lines h/10 wide. The end view is on the right in first angle and on
the left in third. The block only says a cell holds the symbol; the angle
comes from drawing.projection, and the sheet scene redraws when it changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a title block's fields, and text typed over its cells (#3875)
A title block cell reads its fields from the component the sheet documents (its
name, part properties, material and mass from the bill of materials), the
drawing, the sheet (number and count among the counted sheets) and the newest
revision row; a field with no value shows "-". A key its source doesn't have is
refused when a block is given or read. Sheets save text typed over their cells by
cell name; drawing.inspect lists each text cell with its value beside an override.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates as data: a drawing with no model, and ISO built-ins (#3875)
A template is a drawing with no sources, views, dimensions, balloons, revision
rows or documented components, so it is saved and read as a drawing is. A new
drawing is a copy with ids of its own. The built-ins, ISO A4 to A0 for parts and
for assemblies, are made in code when asked for and differ only in their general
tolerances.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates: drawing.create from a template, and the preferred ones (#3875)
drawing.create takes template? (default ISO A3, for a part or, for a design with
components, an assembly) and projection? over the template's. The new
drawing.template.list lists the built-ins and marks the one a new drawing starts
from. Preferences add a template for part drawings and one for assembly drawings;
the app fills in the preferred template and projection before drawing.create
runs, so a template named keeps its own projection, instead of changing the
projection after the drawing is made. A saved template this version doesn't know
reads as the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates: apply one to the drawing open, moving nothing (#3875)
drawing.template.apply {template, dry_run?} gives each sheet the paper, drawing
border and title block of the template's sheet in its place (its last for the
sheets past its own). Text typed over a cell stays while the new block has a
text cell of that name; the cells whose text is dropped are listed. Nothing
moves: the views a new paper leaves outside the drawing space are listed. A dry
run answers the same and changes nothing; applying is one undo step, none when
nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: views a title block covers are listed, never moved (#3875)
A view lying over its sheet's title block is listed with the ones the drawing
space leaves out, after a change of paper or block (drawing.sheet.set) and when
a template restyles a sheet. Where a block sits is one rule, the one a sheet is
checked by (Sheet::title_block_outline), and the overlap of two boxes is one
rule in Aabb2::overlaps, which the title block's own cell check now uses too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates: save one as a file, and start or restyle drawings from it (#3875)
drawing.template.save {path} writes the drawing open as a template: its format,
and nothing it draws or documents. drawing.create and drawing.template.apply take
a .json template file as well as a built-in's name. A file is read as a drawing
is, then held to the template rules; files are read and written through the same
file check and atomic write as the sheet export. A drawing made from a file keeps
its own copy, so a later save changes no drawing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: the built-in title block is 180 x 49 mm (#3875)
The top row is 15 mm, Sheet is 30 mm wide, lined up with Mass, and Date of
issue is 32 mm. The top row now holds one line of the legal owner, two of the
general tolerances and the 3.5 mm projection symbol.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: one operation sets a sheet's title block, and drawing.sheet.set names the typed text it drops (#3875)
A sheet's block was set in two places: drawing.sheet.set kept the typed
text of the text cells the new block still has, and drawing.template.apply
did the same and listed what it dropped. Sheet::set_title_block is now the
one rule both use. drawing.sheet.set's reply gains `lost`, the cells whose
typed text a new block drops, as drawing.template.apply's reply has it, and
its help says that a view over the title block is listed too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates: the built-ins and a new drawing start with the border only; the built-in title block is added by name (#3875)
A template now holds only the ISO border by default. A title block,
tables, references and text are added to a drawing, and a template saved
from it keeps them.
- The ten built-ins (iso-a4-part ... iso-a0-assembly) become five,
iso-a4 to iso-a0: one sheet with the ISO border. Without the block, the
part and assembly versions were the same.
- drawing.create with no template starts from iso-a3. The two
preferences for parts and assemblies become one, drawing_template,
"Template for new drawings".
- drawing.sheet.add and drawing.sheet.set take title_block: "built-in".
The built-in block's general tolerances are a part's or, for a design
with components, an assembly's, through Sheet::set_title_block.
- An old name such as iso-a3-part is refused with the list of names;
drawings haven't shipped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing title blocks: a drawing with no number of its own is numbered by the component its sheet documents (#3875)
The identification number cell read the drawing's part number property,
and showed "-" for a drawing that has none, which is every new one. Now
such a drawing shows the name of the component the sheet documents, so a
new drawing of a part is numbered by the part until it is given a number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing templates: a template saved from a drawing keeps typed text only over plain text cells (#3875)
A template saved from a drawing kept all the text typed over its title
block's cells, including text over a cell that shows a field, such as
the material or the title, which belongs to the design the drawing
documents. Now it keeps the text typed over cells of plain text, such as
the general tolerances, and leaves the rest behind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing title blocks and tables: a field without a value shows nothing (#3875)
A title block cell or a table row whose field has no value (a property
nobody gave, a row field its row doesn't have, an uncounted sheet's
number) now shows nothing instead of "-".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing title blocks: the built-in block's general tolerances start empty (#3875)
The general tolerances cell of the built-in title block now starts empty for
parts and assemblies alike, rather than ISO 2768-m in the block and a part's
or an assembly's text added by drawing.sheet.set. A shop types its own, or
its template carries them, and an empty cell shows nothing.
- template::PART_TOLERANCES, ASSEMBLY_TOLERANCES, for_assembly and
built_in_block go: "built-in" is title_block::default_block.
- drawing.template.list's help no longer speaks of part and assembly
built-ins.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Every point on a spline surface returned its basis tables by value, up to
272 bytes several times over. Filling them in place takes about a quarter off
meshing a round extrude's wall, with the same numbers.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6257
* Align: move bodies by frames that follow sketch and model geometry (#6257)
solid.align takes from_frame and to_frame: a joint origin on the model
(a face's or round end's centre, an edge's middle, a corner, found again
by name) or a sketch point or a sketch circle's, arc's or ellipse's
centre. Both are resolved on every evaluation, so the bodies follow
their target when it changes. An optional angle turns the bodies about
the target's direction after the move.
The Align dialog takes sketch points and curves as From and To, offers
the Joint Origin snap and an Angle row.
* Align frames: box the joint origin (clippy large_enum_variant)
* Align frames: every moved body on the frame's component, placed once
* Align frames: a sketch id's length in characters
* Align frames: the dialog test's sketch curve hit carries its point
* Align frames: the dialog test takes Vec2 from solidcore-record
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* New kernel cases go to solidcore's corpus; tests/kernel-cases/ only shrinks
tests/kernel-cases/CASES lists every rig and ladder case there is today. `cargo xtask lists`
fails on a case directory it does not list, saying where a kernel case goes instead
(solidcore's crates/solidcore/tests/kernel_cases/, exported with `cargo xtask kernel-cases
--export` or written by hand), and on a listed case that is gone. AGENTS.md, CONTRIBUTING.md,
the tests skill, the rig README and EXEMPT say the same; a new command gets an EXEMPT line
naming where it is tested.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* CONTRIBUTING: the kernel-cases paragraph ends before the naming corpus one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A conic of weight other than 1 and a Bézier above degree 3 become cubic Béziers within
1e-4 mm of the curve (`paper::cubic_pieces`), so the walk takes them and every writer
draws them with the cubics it already writes. Each piece's cubic has the curve's ends
and end tangents; its distance is bounded from the Bernstein form, not sampled: for a
Bézier, by the control points of its difference with the cubic raised to its degree;
for a conic, by Q·D − N over the denominator's least value. A piece over the error is
halved exactly and tried again, up to 4096 a curve and 1,000,000 a scene; past that the
curve is refused, never drawn coarser. The walk counts the cubics it made. Circular arcs
are left to the shared `paper::cubics` helper.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* A drawing's list of one kind of record: ById, with balloons first (#5426)
Each kind on a sheet writes out the same add, find by halves, cap, order and check loop. ById holds
those, so a kind's own file holds only its own rules, and the file's bytes don't change: it saves as
the plain list. Views and dimensions stay on their own lists for now, since other work is on them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A drawing keeps an image's file once, however many places it sits (#5426 W38e-1)
images holds the files and sheet_images each place one sits, so a logo on every sheet costs what one
does. drawing.image.add reads the file (bytes and pixels checked from its header before anything
decodes it), reuses a file with the same bytes, and saves the bytes without the path. A file goes
with the last thing that uses it, which Drawing::images_in_use alone says, and reading a drawing
refuses a file nothing uses or a record its file disagrees with. A sheet's list and delete take the
placements on it. Deleting one placement waits for selection.delete to take a drawing's objects. Its
pixels on paper are W38e-2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet images: an image file's pixels on any paper grid (#5425, W38e-2)
A PNG or JPEG decoded once, then stretched over its paper rectangle onto the pixel grid a writer
asks for: a box filter in linear light with alpha premultiplied, so a shrunk logo keeps its edges
and gains no dark fringe. The size is read from the header and refused over 64 megapixels before
anything is decoded. An EXIF orientation is applied; colour profiles are not read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet images: a placement in the sheet's scene and its SVG (#5425, W38e-2)
Each image placed on a sheet is a group of the new kind `sheet_image`, between the drawing border
and the views, so a view's lines draw over a photo. `drawing_pictures` holds both that group and
the provider a writer asks for its pixels, so the two read the same placement.
The provider holds what one sheet uses, decodes a file when it is first asked, once however many
placements show it, and refuses a sheet whose files hold more than 64 million pixels, from their
headers, before anything decodes. `drawing.export` passes it to the SVG writer in place of
`NoPictures`, and a file that won't decode refuses its sheet by name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: pin the product image's output before it is drawn in tiles (#5624, W17b S1)
The decoded rows of five product renders (orthographic on a transparent background, perspective on a
solid one, a PBR surface, two glass layers sorted back to front, triangles crossing every edge of the
picture), taken on this tree. The next change reshapes ImageTask into a prepare stage, tiles and a PNG
sink; they must not move. The PNG bytes are not pinned: their compression depends on the deflate
backend the build unifies (flate2's zlib-rs when the UI crate is built alongside, miniz_oxide
without), not on this code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: pictures drawn tile by tile into any pixel window (#5624, W17b S1)
The CPU product renderer, reshaped so drawings can use it: one rasteriser (`Raster`) prepares a
scene once (appearances, projected triangles, glass sorted back to front), then draws each tile of
the picture on a canvas of its own. A sample's position comes from its whole-picture index, so tiles
put side by side are the picture drawn whole, to the byte.
- `ImageTask` (render.image) is that rasteriser over one whole-picture tile from the product camera,
then its PNG: the same output, pinned by the previous commit's rows.
- `PictureTask` draws a `PictureRequest`: a `Projection` (the product camera, or an `OrthoFrame`,
W17a's view frame as plain data: a `Plane` basis, a scale and a paper shift, on a
`geom::pixel_grid::PixelGrid`), any list of `PixelWindow` tiles, `Supersample::One` (pixel centres)
or `Two` (i + 1/4 and i + 3/4), a `BodyRole` per body (`DepthOnly` hides what lies behind it and
draws nothing itself) and an optional background (none: transparent). Each tile comes back as
straight-alpha sRGB RGBA rows, blended in linear light.
- The orthographic map is the frame's paper map, onto the grid, so lines drawn from the same frame
register with the pixels (to 1e-9 mm in the test).
- Limits: 65,536 px a side, no total cap; each tile under the resolver's `RenderLimits`, as the
product image is; at most 65,536 tiles; the prepared lists as a product image's; pixel tests up to
8 per sample of the picture (128 M for a product image, as before), counted at admission by the
one projection the raster uses, as main counts a product image's.
Not here: the drawing light, stored per-tile bins (S2, measured), the paper scene's picture item
(S3), 4x sampling, and `raster::render`, the snapshot rasteriser, which stays as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: time the tile renderer (#5624, W17b S2)
An ignored timing test, as `simplify_timing` is: a 65,548-triangle front view drawn as the
product image, as one 300 dpi picture, and in 64-row strips at 300 and 1200 dpi, each the median
of three runs. It is the measure S2's speed-ups are judged by.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: a tile passes over a triangle outside it before painting it (#5624, W17b S2)
Each tile placed and painted every triangle of the picture, then dropped those outside it: the
appearance lookup, the PBR normals and the colour decode ran for every triangle in every tile. A
triangle's work is now three steps, `corners`, `look` and `place`. Preparation runs them in
today's order, so its checks and errors are the same. A tile places a triangle first and paints
only those inside it. What is drawn doesn't change: the pin and the tile tests stay as they were.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: one light per picture (#5624, W17b S2)
`raster::shade` normalised its key light and highlight directions again for every sample,
although both depend only on the view. `raster::Light` works them out once per view and shades
with them. The tile renderer and the snapshot rasteriser (`raster::render`) both use it, so the
product light is written in one place. The arithmetic is the same, so every pixel is too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: sRGB codes from tables (#5624, W17b S2)
Each shaded sample was stored as sRGB through a power (three per sample), and each output pixel
was averaged from its samples through twelve more and written back through three: the powers
were most of a sample's arithmetic. Decoding is now a 256-entry table of `geom::srgb`'s own
values (#7162), which also ends this file's own copy of the formula. Encoding counts the code
starts (the linear values halfway, in sRGB, between two codes) at or below the value. Within a
billionth of a start, where the formula's rounding could fall either way, `srgb::encode8`
decides, so every code is the one it gives. A test checks both against `geom::srgb` at every
start, the numbers around it, the band's edges and a million values in and outside 0 to 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: a tile's passes run in loops (#5624, W17b S2)
The raster went back through its step loop for every sample: the cancel check, the stage match,
the tile's window and its canvas bounds, once per sample cleared, tested or averaged. Clearing,
the opaque and glass passes and the downsample now each loop on their own up to the step's budget,
counting a unit as before; preparation and the glass sort still take one unit a call. A step
still checks for cancellation before each stage's run and still does at most 16384 units, so the
host's slices and the progress counts are the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: tests for a picture's light, glass order and test budget (#5624, W17b S2)
Three planted faults went through the image tests; each now has one
that fails:
- an orthographic picture lit from another direction than its eye: a
face square-on to the view is the colour the product image gives it;
- glass placed by a triangle's first corner, not its middle: a tilted
square whose first corners lie in front of the near one, its middles
behind;
- a picture held to the product image's pixel-test budget: a face
across most of an A0 sheet at 1200 dpi is prepared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a shaded view's picture on paper (#5624, W17 V9b)
A saved view in a shaded style draws on its sheet and in drawing.export:
draw puts one picture per entry of the view's parts under its lines, and
ViewPictures renders each on the writer's grid through the frame that
placed the lines. SheetPictures answers for a sheet's images and views.
The styles with lines stay refused until W06's exact lines.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: a picture's count of its tiles and its fixed limit, as #6483 has them (#5624)
A triangle counts only where it meets the tiles asked for, and a picture has a fixed 400 M pixel tests,
as #6483 at bf93e890e. V9b's stack holds an older copy of that slice; this drops away when drawings
takes main. PictureTask says what admission counted, for the view's running sum.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a shaded view's pictures add up to one limit (#5624, W17 V9b)
A writer asks for a picture a band at a time, and each request is limited on its own, so ViewPictures
keeps what each view's requests have counted and refuses the next one past the limit, by name, before it
paints. That makes 400 M a bound on a whole view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Each path test opens its own device and compiles the path pipeline. On a
cold driver cache that takes minutes and gigabytes per compile, and libtest
ran one per CPU thread side by side: on NVIDIA the solidcraft-gpu tests ran
for hours and committed ~80 GB. Executor::new now holds a process-wide lock
while it compiles; the first compile fills the driver's cache and the
waiting ones get the pipeline from there.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The CLI's kernel_cases_export.rs still imported Brep from solidcraft_geom::brep after the layer split moved it to solidcore_record::brep. Changes this one import.
The second half of #11626: apps/solidcraft-cli/src/kernel_cases_export.rs (#11568) imported
solidcraft_engine::geom::brep::Brep, which #11496 moved to solidcore_record::brep::Brep.
cargo clippy --workspace --all-targets -D warnings is clean with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
#11568's trace (crates/smlib/src/trace.rs) named the record as solidcraft_geom::brep::Brep,
and #11496 moved that type to solidcore_record::brep. Each merged green on its own; together
main does not compile (error[E0425]: cannot find type Brep in module b).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel: the B-rep record and the native body file come from solidcore-record
SolidCraft's portable B-rep record (`solidcraft_geom::brep`: brep.rs, topology, history,
envelope, part, curve2) and the native body file (`solidcraft_kernel::native`: the tagged binary
codec and the container) move to solidcore's `solidcore-record` crate: geometry as data, with
structural validation and no maths (solidcore's docs/layers.md, stage 1). Every caller uses
`solidcore_record::brep` and `solidcore_record::native`; the old copies are deleted.
What computes from coordinates stays with the kernel, in geom's `brep`:
- `brep::check`: the record's geometric checks (orthonormal frames, non-degenerate planes,
unit revolution axes, non-singular placements). `check::validate` and
`check::validate_built` are the record's validation and these together, and every caller of
`Brep::validate` uses them, so what is accepted is unchanged;
- `brep::label`: a surface's natural ranges (a cone's apex), `curve_interval`,
`edge_curve_interval` and `form_turns`;
- `brep::pcurve::eval`: a pcurve's point;
- `geometry::check`, `placement::moved` and `split_edges` become functions on the record.
The kernel's native module keeps the conversion between a body and its saved record
(metadata.rs) and checks the decoded record's geometry. `native/analytic.rs`, which no module
declared, is deleted.
solidcore-record is pinned to its rev on solidcore's `layer-record` branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT
* Geometry: Vec2, Vec3, Plane and the profile types come from solidcore-record
The plain data of vectors and points, sketch planes and planar profiles (`Seg2`, `Loop2`,
`Region2`) moves to `solidcore-record`, with its constants and component-wise operators only
(owner decision, solidcore layer split). Their geometry stays in geom as traits:
`Vec2Geom`, `Vec3Geom`, `PlaneGeom`, `Seg2Geom`, `Loop2Geom`, `Region2Geom`, `Seg2ArcFit`,
`Loop2ArcFit` and `Region2ArcFit`, in scope with `use solidcraft_geom::prelude::*`. Every caller
names the types from `solidcore_record`; geom no longer defines or re-exports them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT
* Kernel: pin solidcore-record to solidcore main f5e8e9a29
solidcore-record is merged on solidcore main (tangency-labs/solidcore#2519); its crate there is
identical to the rev pinned before but for its clippy configuration. The lock is regenerated
against the merged rev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
It fails with status 1001 since #11360 moved SolidCraft onto solidcore alone, as the
kernel test variable_radius_on_a_box_edge already listed in tests/KNOWN_FAILING_TESTS.
The oracle keeps its own list, so main's Reference tests have been red since.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Paper scene: clips of lines and arcs, cut once before every writer (#4890 A8a)
Scene::prepare_clipped(clips) cuts each group of an object to that
object's Clip, a rectangle or a circle (a detail view's), and keeps what
lies inside; prepare() is prepare_clipped with none. Prepared holds a
Cow: a scene without clips is borrowed as it is, and Group and Scene are
unchanged, so today's scenes are the same bytes.
- Lines and arcs are cut where they cross the edge; a part is kept when
its middle is inside, the edge included. Parts no longer than EPS go.
- Kept parts that follow one another stay one open stroke. A stroke
wholly inside is kept whole, closed if it was; a closed one cut open
rejoins across its seam.
- A dashed stroke keeps its pattern: each part's phase is where it
starts along the stroke. Across a closed one's seam the pattern runs
on only when its length is whole patterns, so the parts rejoin only
then.
- Checked: one clip an object, a rectangle from its lower-left to its
upper-right corner or a circle with a radius above 0, within 1e5 mm;
a clipped object's items strokes of lines and arcs. What the cuts
made is validated again.
SVG and PNG draw the cut scene through Prepared as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: clips of every curve, and fills kept or dropped whole (#4890 A8b)
A clipped object's strokes may now hold any curve, not only lines and
arcs, and its fills are checked against the clip.
- A line or an arc is still cut where its equation says. Any other
curve is halved while its control points lie either side of the edge
(widened by EPS), until they span at most CUT_MM (1e-9 mm), and is cut
there. A curve that needs more than MAX_HALVINGS halvings (one that
runs this close along the edge) is refused as not supported yet.
Each part is the same kind of curve as the whole.
- Seg2::part gives the piece between two parameters, starting and
ending exactly where split_at puts those points; a conic's tail is
re-normalised, so its second parameter is carried into it.
Seg2::MIN_SPLIT names split_at's distance from the ends.
- A line or a circle within EPS of touching a circle only touches it:
one cut there, never a sliver of chord.
- A fill wholly inside its clip is kept and one wholly outside is
dropped. One that crosses the edge, or lies round the whole clip, is
refused as not supported yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures in a clipped object, cut by the SVG and sheet PNG writers (#4890 A8c)
A picture wholly outside its object's clip is dropped when the scene is prepared. One crossing the clip's edge reaches its writer with the clip, on the grid item, since pixels can't be cut as geometry: SVG cuts it with a clipPath, the sheet PNG by whether each pixel's middle is inside. Both draw only the pixels that meet the clip's box. Text in a clipped object stays refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The web app is now offered at /app/ (latest release), /app-rc/ (newest release candidate) and /app-edge/ (current main), each with its own browser storage. /app/ is built from the latest release's web zip instead of main.
A stroke can carry a pattern, `Dashes { lengths_mm, phase_mm }`: dash and
gap lengths in turn, in paper millimetres, and how far into the pattern
the stroke starts. Without one a stroke is solid, and a solid stroke
reads and writes as before.
- Checks: 2 to 12 lengths, an even count, each above 0 and at most
1000 mm; the phase from 0 up to the pattern's length; at most a
million dashes along the stroke, counted from its pieces' own lengths.
- The walk puts the pattern on the writer's grid: a dash or gap under
half a step is one step, counted, as widths are.
- SVG: stroke-dasharray, and stroke-dashoffset when the phase isn't 0.
- PNG: tiny-skia's dashing on the flattened line; its points count
against the sheet's, a line in a gap draws nothing, and one tiny-skia
won't cut is refused rather than drawn solid.
- The paper fuzz cases carry a dashed arc.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Picks run on a copy of the operand: a pick builds query caches on the body it
reads, so the traced body stays as an untraced run leaves it.
- An untrim and an extension record their picks with the pickers they run
(`face_at`, `nearest_edge`).
- A final body matches the newest export of its record that an operation made.
- A stopped run is the kernel's when the last failed operation is followed by
copies only.
- A re-export removes each case's old entry first; fixes.json is written whole.
- The manifest names no commit for a copy without git, never an empty one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
An entry keeps what each operand body is and names <case>.bodies.json.gz, which
holds the records (gzip with no timestamp, so the same records give the same
bytes); the entry itself is pretty JSON. The corpus of 1202 cases is 33 MB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
An entry's operation is expressible when the kernel accounts for its result; the
values only SolidCraft grades (continuity, meshes, files, command answers, merged
counts, SolidCraft's wording of a refusal) are listed under `ungraded` instead of
making the whole case inexpressible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
`cargo xtask kernel-cases [--ladder] --export DIR` runs the rig with the kernel's
operations traced (`smlib::trace`) and writes one entry per case: the operation, or
chain of operations, that made the bodies the case ends with; each operand that came
in as a record, as that record; the parameters, with every pick by points also given
as the topology index it picked; the fix set; the case's expected values and the
rig's result. A case no kernel operation alone accounts for is written too, marked
not expressible with its reasons. DIR/manifest.json counts them per area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
drawing.status says each view's status (current, out of date, placeholder or
failed, with why) from what the sheet page last drew, and each dimension's in the
words inspect uses, reading each body once for the call. Nothing is drawn.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The packaging action can't read a hyphenated version from the tarball's name, so the job gives it a name without the hyphen and renames the package back. A hyphenated version no longer fails the build if its Arch job fails; a plain version still does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The walk puts a text run on the grid as its glyphs' outlines, placed by the run
(`TextRun::outlines`), each loop walked as a fill's: `GridItem::Text`, with the run's
index among its group's items, so a writer that sets real text (PDF) finds it in paint
order. SVG writes one path a run, filled black with its default nonzero rule, so text
looks the same without the font and never reflows. The sheet PNG refuses text by name
until B2b, and its refusal test says so.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Bumps the version to 0.40.0-rc.1 and folds the pending format changes into format 49. The default-layout header test now expects the room the version really takes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Where a sheet's objects sit: bounds beside the scene (#4894 WE3)
The sheet scene now says where its border and each view sit on paper: the box
round what each draws, and a view's boundary, so one that can't be drawn can
still be picked. It is worked out once per assembly, beside the scene rather
than in it, so no writer sees it and the page needn't inspect each view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selected drawing objects: a view, dimension or balloon in the selection (#4894 WE4)
select.set takes {type: drawing, drawing, object} for the drawing open. It adds no
undo step and changes nothing saved, and a selected object leaves the selection
when an undo takes it or its drawing closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete on a sheet: views, dimensions and balloons in one step (#4894 WE5)
selection.delete now works with a drawing open: a view goes with its dimensions
and balloons as one undo step, and one with views projected from it is refused,
naming them, unless they are selected too or contents: delete takes them. A sheet's
delete and this one share the record's one removal rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a view's box holds what it draws, and what's chosen goes in any order (#4894 WE3, WE5)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Where a sheet's objects sit: bounds beside the scene (#4894 WE3)
The sheet scene now says where its border and each view sit on paper: the box
round what each draws, and a view's boundary, so one that can't be drawn can
still be picked. It is worked out once per assembly, beside the scene rather
than in it, so no writer sees it and the page needn't inspect each view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Selected drawing objects: a view, dimension or balloon in the selection (#4894 WE4)
select.set takes {type: drawing, drawing, object} for the drawing open. It adds no
undo step and changes nothing saved, and a selected object leaves the selection
when an undo takes it or its drawing closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete on a sheet: views, dimensions and balloons in one step (#4894 WE5)
selection.delete now works with a drawing open: a view goes with its dimensions
and balloons as one undo step, and one with views projected from it is refused,
naming them, unless they are selected too or contents: delete takes them. A sheet's
delete and this one share the record's one removal rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a view's box holds what it draws, and what's chosen goes in any order (#4894 WE3, WE5)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* What's on each sheet: drawing.inspect lists its views (#4894 WE1)
Each sheet in drawing.inspect now lists its views: each base view by id, followed
by those projected from it, with what it is called and its dimensions and balloons.
It is one pass over the record with no model read, so the Browser can read it once
per revision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
06-threads/018-external-m10-both-hands makes 606 edges and 404 vertices (486 and 324 before),
with the same 204 faces, area and volume (to 1e-11), in two runs on the box; every other ladder
case is as the golden records it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The browser has no font folders, so `font_dirs` is empty there. The first
kana or Han a text's font lacks asks for the font the web app already
fetches on demand (BIZ UDPGothic); no new file. The text is pending until
it comes, then sets whatever it has a glyph for. If the fetch fails, or
the font lacks a character, that character is refused by name, and the
refusal says the web covers Japanese for now.
The web app starts the fetch through its existing loader, once, when a
text waits for the font, and hands the font over when it arrives.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Five tests fail at the new pin and are listed with their causes: the variable round along a box
edge (status 1001, twice), the shell of a fully rounded box past its rounds' radius
(SM_ERR_INVALID_INPUT), the chamfer that would grow the part (no face instead of the
too-large refusal) and the box-edge round's wire record. The tabbed plate's outer loop with a
partial selection passes and leaves the list; issue2422's vertical edge now fails as a smooth
edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright build (9524.3437, 10 faces,
solidcore#2431); 5158-fillet-round-just-past-a-10mm-face, the curvature pipe on a plate's
order-2 section, the concave-arc and front-top rounds (r5, r7 and default) and the peg's front
and concave rounds and chamfers build and pass their checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
TableLayout::paper gives a placed table's lines as one paper group of
the kind it is (parts_list or revision_table), so both sheet tables reach
paper through one function:
- the outline as one closed stroke, outline_line_mm wide;
- a stroke cell_line_mm wide across the whole table at each row boundary
inside the outline, the heading's too, from the top whichever side the
heading is on;
- a stroke down the whole table at each column boundary inside it.
Each line is drawn once, centred on its edge, on the layout's own
corners. The cells' text follows once the paper scene has text (D3b,
after #4813); hatch clearance waits for hatching.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The rim alone was pinned to 7.958674274526857, the marched end rib's value; its closed form,
the spandrel (1 - pi/4) r^2 revolved about the disc's axis outside |x| < 4, is
7.958672911836132, which the rim's End (fillet_blend_corner) builds to 5e-8. With the corner
arc's Pappus volume the two take off 8.117808752; solidcore 8ddce9016 removes 8.117808800.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 (pinned) the r2, r2, r3 corner at (20, 0, 20) is one patch: 10 faces,
7928.743041456134 mm³, the r3 round and the patch the second fillet's. The test is pinned to
that and leaves the known-failing list. The fork's setback corner (15 faces, 7928.142563938)
waits for solidcore#2310; solidcore#2382, not merged, moves the case to 7927.724282512234.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
smlib's run() catches a solidcore panic and replaces the kernel (kept: the app does not die
natively), returning Error::Internal; the kernel turned it into KernelError::Failed and the
engine into Other, so hostile_params_never_panic and the fuzzer no longer saw kernel panics.
Now the kernel's wrapper errors go through KernelError::smlib, which keeps Internal; a body the
wrapper could not take because of a panic is Internal too. A feature whose evaluation hit it
records the result as internal (not cached: the kernel was replaced), and the command that
made it, or any command whose kernel call returns it, fails with EngineError::Internal under
its own id. Crash reports mark a panic inside a solidcore call recovered (kernel::guarded), and
the crash test's kernel mode panics inside a solidcore call.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The kernel crash test's command must fail with EngineError::Internal naming
diagnostics.crash_test, as a panic in the command itself does: the panic detectors
(hostile_params_never_panic, the fuzzer) look for Internal. Today it is EngineError::Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
solidcore's algorithms recurse (subdivision, intersection, filleting) and its README asks for
8 MiB, a native main thread's stack; Rust starts other threads with 2 MiB, and only the web
build set more. kernel::KERNEL_STACK is 8 MiB and kernel::kernel_thread a thread builder with it.
The kernel's parallel map runs on a pool of its own with that stack (on a worker of a pool
already, as in map_with_local_pools, it stays on that pool as before), the one-thread mesh pools
and map_on_threads' helpers have it, and so do the engine's interference worker and the
evaluator's plan-mesh thread. A test recurses 5 MiB deep on each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
While a dump folder was set, every call serialised each input body before it ran, so the rig's
timings (taken with a folder set) measured the serialiser as much as the kernel. The callers now
hand run_on the bodies the call reads; they keep them until its result is known, and only a
failing call serialises them, into the folder as before. A test counts the serialisations: an
answered volume and union none, a failing call one per input.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The check had become one-sided after the C++ kernel's removal: a case that started passing,
or a change in the count, went unnoticed. As on main, a case that now passes fails the test
until it is added to the list, one that no longer passes is a regression, and the count is 111.
At solidcore 8ddce9016 solidcore passes exactly the 111.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Drawings: the font a drawing's text is set in, by family (#4890 F1)
A drawing names the font family its text is set in (`font`, saved only when
set; a pending drawing-format file). `drawing.create` and `drawing.set` take
it, and `drawing.inspect` reports it, with `font_note` when this computer sets
the text in the built-in font instead ("Futura isn't on this computer: set in
Liberation Sans"). Drawings name fonts by family, so they travel: a font file
is refused.
Paper text finds the family among the installed fonts as sketch text does
(`paper_text_in` for given folders), admits each face once a process, and
sets a family that is missing or can't be set on paper in the built-in font.
Bold takes the family's bold face; the serif flag comes from the face's OS/2
family class. The fixed list of drawing fonts is gone.
New drawings made in the app take the interface font when it is a family.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper text: any face with outlines is set, and says how a PDF may carry it (#4890 F2)
A face is admitted for paper whatever its tables lack:
- a variable face is set at its default instance, which is what a PDF draws;
- its cap height is the one sketch text scales it by (OS/2, else the top of
its `H`, else 70 % of the em);
- its PostScript name is what a PDF name can hold of its own, else of its
family and style, else `Font-` and the start of its id;
- without a `post` table it has no italic angle, and a fixed pitch when every
glyph advances alike;
- its stem width is measured across its `l`, else taken from its weight.
A bitmap or colour-only face, with no outlines to fill, is refused by name.
`Font.embed` says how a PDF may carry the face, from its embedding permissions:
a subset, the whole face (no subsetting), or not at all (restricted, bitmap
embedding only, or CFF2 outlines), when the PDF draws the runs' outlines with
their text beside them. Which characters a PDF name may hold is now one rule,
`is_postscript_char`, that the record's check and sketch share.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper text: a font's family, for readers that pick fonts by family (#4890 F2)
`Font.family` is the face's own family name: its typographic family (name
ID 16), else its family (ID 1), read from the face itself (in a collection,
not the first face), without control characters and at most 255 characters;
empty when it has neither. A DXF text style picks a font by it; `Font.id`
stays the identity, so two faces of one family are still two fonts
(@0xlillith on #4890). The name lookup PostScript names use is one function
now, shared by both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fonts: one list of fallback fonts per script, in sketch (#4890 F3)
The interface's lists of fonts to try for a script move down to
`sketch::fonts::fallback`, so drawings can use the same ones. Each row is
a family and the files it's known to be in. The interface reads the files
in the order it always did, so what it finds is unchanged.
- `CRAFT_FONTS_DIR` joins `font_dirs`, as the interface already has it:
`SOLIDCRAFT_FONT_DIRS`, else the pack, then the system's folders.
- `font_files` sorts the files within each folder, so a search doesn't
depend on how the system lists a folder.
- The Windows folder search takes its names from the Japanese list
instead of its own copy of them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper text: a character its font lacks falls back to a font that has it (#4890 F4)
A text on paper was refused for any character its font lacks. Now each
such character falls back to an installed font that has it: the script's
list in `sketch::fonts::fallback` first, Han by the drawing's language,
then the first face in sorted order with outlines and the character.
- Runs split by direction, then by font. Every font takes the same em
size, on the line's baseline and pitch. A space, a digit or punctuation
stays with the run it follows when that font has it; a mark stays with
its letter. A font fallen back to is shaped, with the drawing's
language. Its nearest style is used: bold or italic isn't refused.
- A line its own font has all of is set as it was.
- A character no font has is still refused by name.
- The last-resort search reads each file's character map alone, stays
within `MAX_FONT_FILES`, and keeps its answers, misses too, for the
process.
- `paper_text_now` is for the window's thread: the search runs on a thread
of its own (`font-search`) and it refuses with `FontPending` until the
answers are in. `paper_text` searches where it's called.
- `paper_fallback_notes` names what fell back, for a drawing's status,
from the answers so far: it looks for no font.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The workflow triggers on the root Cargo.toml and Cargo.lock, and the plan gets their diff
(--pin-diff): a changed line that names solidcore's repository (Cargo.toml's git rev, Cargo.lock's
source) selects every area and the ladder. A path filter cannot tell a pin from another
dependency's change, so the plan reads the lines; another dependency's change runs no area.
The fillet rig is not triggered: the kernel rig's fillets shard runs the same cases.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A solidcore bump changes only the root Cargo.toml and Cargo.lock, which neither PATHS-ALL nor
the workflow's trigger paths list, so it ran no rig. The tests want a change to the solidcore
lines of those files to run everything, another dependency's change in them to run nothing, and
the workflow to trigger on both files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A shell, offset or thicken solidcore's one construction refuses because a face's offset folds
(SolidError::ShellRefused, ShellRefusal::Fold) is Error::WallFolds with the largest wall it
names; the kernel says "the wall is thicker than a face curves, so the face's offset would
fold; the largest wall that works is 10 mm". A blend too large carries solidcore's NoRoomReason
as Error::TooLarge's RoomReason, worded in its message before the largest size that fits:
a collapsed offset (solidcore#2431) says the ball is as wide as the face it rolls on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A thicken of solidcore#2350's parabolic sheet past its apex's radius of curvature is refused
by solidcore's one construction (ShellRefused, Fold, naming 10); the wrapper passed it on as
"solidcore: ..." with no words of its own. A round at the radius of the round it rolls on
beside the 851 part's arc wall is refused as a collapsed offset (NoRoomReason::OffsetCollapses,
solidcore#2431); the message named the size but not why. Both fail until the reasons are
carried through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 three equal convex rounds at a vertex of three planes are the blend
corner's Ball (fillet_blend_corner). The wrapper set a setback on the corner after the corners
were made, so a set-back vertex was already a Ball (NByTwo) and its setback was refused
(CornerRefused): a_setback_corner_left_open_returns_its_hole (both) and setback_corner's
closed form. solidcore's AddSetBackVertex, called before the corners are made as the fork's capi
round_edges does, keeps a set-back vertex out of the Ball, and its corner is set back.
The corner a setback is set on may also be a blend corner whose event is the Setback, as the
capi takes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
At solidcore 8ddce9016 a Ball corner is a BallPatch (fillet_blend_corner) and a round between
NURBS faces a ProceduralBlend (fillet_round_as_definition). The arrays' B-spline part of a face
had neither, so their export fell to the approximation and failed ("an approximated face surface
that is not a B-spline"): the rounded cube, the variable and curvature rounds and the
all-edges box in the smlib tests, and the Ball-corner and round cases of the rig.
Both are their nets, exactly. A ball patch also goes out as SURFACE_BALL_PATCH, its sphere's
centre and radius in FACE_DEFINITION_REALS, as the record's BallPatch reads it, and comes back
as solidcore's BallPatch on that net: the rounded cube's eight corners stay on their spheres
through the record and back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
solidcore main at 8ddce9016 adds cone_unbounded_parameterized_as_nurb,
ellipse_open_arc_keeps_end_angle (solidcore#2422), fillet_round_as_definition,
fillet_round_on_round_as_definition, fillet_overflow_crease_along_edge,
plane_first_torus_section_exact, keep_exact_pcurves and shell_one_construction
(solidcore#2367), and drops fillet_extended_rail_end_at_side_edge_crossing.
Every one is on. fillet_keep_features is no longer held back: solidcore#2374
fixes the round beside a boss it refused (solidcore#2370).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A block's front top edge rounded r 3 beside a boss joined on its top fails SM_ERR_INVALID_INPUT
with it on; off it builds the closed form, 6099.225530 mm³, as the C++ fork does. Found by
ui-egui's opening_a_large_design_never_stalls_the_window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
solidcore's fit is the largest size less a margin (34.99 where the L bracket's bend builds 35,
4.29 where #3435's ring builds 4.3), so the feature's search keeps naming the size, and solidcore's
is the answer only where the search finds none. The refusal keeps its words, "larger than the
faces beside its edges allow", with the edge after them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
solidcore sizes a blend it refuses as too large (the session's fit, SolidError::FilletRefused under
fillet_gn_section_generator). The smlib crate gives it as Error::TooLarge with the size, what it
sizes and a point halfway along its edge (an equal chamfer's ball radius turned back into its
distance); the kernel words it as the fillet feature's search does (largest_fit_note), and the
feature runs no search when the refusal names it. The 3x2 mixed corner whose rails cross, which
solidcore refuses (fillet_refuse_mixed_corner_crossing_rails), is not supported yet, citing
solidcore#2256.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
With it on, 11 rig cases that pass with it off are refused as breaking through the part, and
190-fillet-disc-rim-past-its-2mm-wall fails status 1001. A fix under the same flag is in progress
on solidcore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
Main took #11351 as one squashed commit (ea772a043). This merge records its history as 509
wave commits: a wave ends at every SMLib pin and holds at most 4 commits or about 800 changed
lines. Each wave lists the commits it holds; the originals stay reachable from tag
archive/merge-main-develop. Main's files are kept as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360).
- b2fd08e85 jyviko: Profiler: no smlib category left in its tests and help
- d49a7eac0 jyviko: Known-failing tests: the convex chamfer that would grow the part passes
- d55fedd56 jyviko: smlib export test: a rounded cube's corners checked on solidcore's spheres
- 017a2a607 jyviko: Known-failing tests: the fillet into an earlier round passes on solidcore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* UI: rim and wall picking tests for a circle of arcs that is one wall
A circle drawn as two half arcs now extrudes to one full-turn wall with its
seam edge, and each rim is one closed edge (tangency-labs/smlib#67). The tests
keep their intent on that body: a rim clicked once is one item, measured and
highlighted whole and picked from either side; a wall picked either side of
its seam is the same surface, lit whole, and toggles off from the other side;
every face is its own patch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillets: a later round at a corner where earlier rounds meet blends them again with it
The owner's ruling of 2026-10-30: a later fillet on an edge at a vertex where earlier
rounds already meet in a mitre makes the corner rounding all of them at once makes, one
smooth patch, the mitre gone. A body made by constant-radius rounds keeps what they were
made on and which edges they rounded at which radius; a later round reaching such a corner
blends the earlier rounds' edges (from the earliest of those meeting there on) with the new
edges in one SMLib blend of the body before them. The result's history is put over the body
the later round was given: an earlier round's face is that face trimmed anew (its name
kept), the corner patch and the new rounds are the later fillet's. A picked mitre seam has
no round of its own: it is refused unless a new edge of its radius meets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Two box edges rounded r2 in one fillet, then the upright edge at their mitre r3 in a second
fillet (tangent chain on, so the seam comes with it): 10 faces, 7928.743041 mm³ as
fillet_radii of the box gives, the r2 rounds' names kept, the r3 round and the corner patch
the second fillet's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: a body's record of rounds goes with its history, and can be read back
The rounds that made a body are over the body its history is over: a new history (an
operation carrying a step's result back to its own operands) leaves the record out, so a
later round never reads one history against another body. Body::rounds gives the record and
Body::with_rounds_of takes one back, checked (edges of the body before them, a fillet's
radii, the body's history over that body), for a saved model to keep it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure
with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574
against strips 7881.678). That body is the strips' outside the block its patch lies in: its
rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails
where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at
most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is
that block; the upper one, at most the strips' volume, stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one
without it is refused ("saved model: rounds"), as is a model without any of its other lists:
the states, the preview and the thinned model all came back empty. The io tests' saved_model
and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part
stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made
by rounds: the list is empty, and every expectation stays as it was.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70)
Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point
classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's
knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles.
Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one.
The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing
changed), so the binding expects 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a strip's tangent and curvature run-offs are the distance long across the surface
SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects
CreateExtendedSurface until the parameter line through the side's middle is that long), so each
run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for
both. The parabola-length formula (418.18) was truck's.
Ruling d2 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: one smooth angle, and a round too small to change the part is refused
The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value
for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about
r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which
answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds,
tolerance / (sec(d/2) - 1). d is the least turn along the edge
(tangent_edge::least_angle_along, at tangent_all_along's stations).
Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest
radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth
(SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
smlib_chamfer turns the distance into a ball radius d sqrt((1 - c)/(1 + c)), c the faces'
binormals' dot (capi chamfer_radius); at #851's cusp the binormals agree, the radius is 0 and
the call is SM_ERR_INVALID_INPUT before the fillet executive runs (gdb: chamfer_edges sees
radius 0; the dump's why is empty). SolidCraft hands every chamfer to SMLib, so the
ball-contact chord (the ball of radius d: 3.822 wide at d = 2, 159.2365 removed) is SMLib's to
build.
Ruling d4 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the
corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib
fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is
ignored until it builds. It replaces the refusal test that expected TooLarge.
Ruling d8 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20
(the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the
The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner
cases the same SMLib (replay/1.0.1 and those commits) builds come off too.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow
their faces first and then what is left of the others; smlib_blend_dropping says which picks'
edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel
returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at
(0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on
its bottom front edge with the front left upright: the block is R21's alone, in closed form).
Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer
ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form,
where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the
known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife edge's 0.5 chamfer builds
SMLib's trim took a fillet meeting its face at more than 78 degrees for one with no side
(smlib-batch-4-rulings 971e567); the chord of the knife edge's 0.5 chamfer meets the flat face at
81 degrees. The case comes off the known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its
loop's normal, summed from the cross products of its chords, pointed down;
fixed in SMLib). With the fix every letter grows, and the join builds at 3°
and 15° by the Round rule and by the default rule (tangent for spline
outlines), where before 15° was expected to be refused.
Exact where the outline derives it: a letter's section at height z is its
outline offset by e = z tan a, by the Round rule of area A + P e + C e² while
the offset trims nothing (Steiner; C half each loop's turning less
tan(t/2) - t/2 at each reflex corner), so the letter is
A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o
at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its
mass properties integrate to 1e-8). The concave joins of r, n, g and e are
tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the
formula), the t's by 15° (9.9e-5 over), and on the block the letters grow
into each other, so the whole word is checked for what holds exactly: one
closed body with the block, and half-way up every point of each straight
letter's outline inside the solid (the t drafted inward failed that).
With SMLib's fix (smlib-batch-4-text-loops 82133b2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges asked G1 at every blend seam. Its front wall
leans 19 over 20 and the others 10 over 20, so at each rim corner the two mitred rounds meet the
sloped corner edge at different heights (0.155625 and 0.276393 below the top): the deeper round
runs on past the corner edge and is cut by the plane of the other's wall, a crease by
construction, the gap below the shallower round filled on that plane. The check now measures
the rounds' contact seams, on the top and on each wall, where the rounds are tangent. The
volume is unchanged.
With SMLib smlib-batch-4-mitre (1c15364): the case passes (V 144530.427946 against
144530.427909, 15 faces, sound); before it, only the four corner creases failed the check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* smlib: Brep::classify_point says exactly where a point lies against a body
Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone
tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a
vertex. A box and a cylinder just off its curved wall in measure's tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::classify_point decides inside, outside or on the boundary exactly
SMLib's point classification at the body's own tolerance, on the exact faces and edges, in
place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point
within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh
body's triangles are its exact shape: on them within the record's tolerance, else by ray
crossings. The kernel's own probes move to it; Body::contains goes once its last callers have.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* doc: a hole decides whether it exits at its drill point's shoulder exactly
Material past the depth needs a body with the point inside, air before it needs every body to
have it outside; a point within a body's tolerance of the exit face is neither.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* engine tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* ui, cli tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::contains, the mesh test, is gone
Every caller asks Body::classify_point now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds
waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it,
SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64
Linux and are no longer ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
The gate on aarch64 Linux reports 16 fillet cases FIXED with the pinned SMLib: the sloped and
equal-slope basin rim chamfers and rounds past their rims (1080-*, 5835-*), the pocket rim
chamfer past the floor, and the three pocket rim rounds now mitred at the pocket's corners
(every-pocket-*). No other area's gate reports a case fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: the re-blend's removed picks formatted as rustfmt lays them out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: blend_smlib laid out by the 2024 edition's rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet: the radius-too-large choice in plain nouns
"If too large: Stop and say so / Largest that fits / Narrow where needed"
becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in
every language of the catalog, with the error and the tip that name them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: a round that would cut through its wall into a hollow is refused
The owner's rule of 2026-10-30: a round running past a rim of its faces
into open air builds; one whose section would remove material through to
a hollow behind its edge (a slit into the hollow, a cut through the part)
is refused as too large, so the fillet names the largest radius that fits.
Decided exactly in the section of a straight convex edge between planar
faces: the round's centre is at depth r below both planes, and it opens
where its arc uncovers a boundary point strictly inside the wedge with no
material beyond it toward the centre (the body's exact point
classification). Looked at: straight edges parallel to the round's (a
hollow's corner), cylinders about parallel axes (a rounded corner), and a
picked concave parallel edge's own round, which fills the corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
The round's centre (32 - r, 42 - r) leaves the hollow's corner (30, 40)
outside its circle, opening the wall, where sqrt2 (r - 2) = r: the case
expects the refusal naming 6.828. 2852's R30, refused naming 25.24, now
passes too: both come off the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
`cargo xtask known-failing --junit PATH` reads nextest's junit (a file, or every .xml under a
directory, so all of a run's junit artifacts at once) and fails on a test that failed and the
list does not name, and on a listed test that passed (FIXED: take its line off, as the kernel
rig's gate does). A listed test that did not run is neither, since a pull request tests only the
packages it touches. The list has the rig's KNOWN_FAILING format (`<test> <cause>`, sorted, the
rig's own parser), with `<test>` nextest's `<binary id>::<test name>`; `cargo xtask lists`
checks it is sorted. The list starts empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
Native Linux tests and the GPU path test shards no longer fail on any failed test: nextest's
"tests failed" exit (100) goes to `cargo xtask known-failing --junit`, which fails on a failure
the list does not name and on a listed test that passes. Any other nextest exit (a build error,
a bad filter) still fails the step at once. The tests skill says to list a failing test with its
cause, in place of ignoring it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the known-failing list takes develop's 10 failing tests
Develop 38fd4a4f6 (CI run 41157648345, after the SMLib eaa998a pin) fails 10 cargo tests; each
is listed with the cause its failure message gives. Seven are SMLib refusals or results off
their derived volumes (fillet, chamfer and shell), the cli action matrix and naming corpus
among them; the two corner_g2 tests are the fitted G2 corner patch bulging past the box, which
the explicit G2 corner fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
Develop 38fd4a4f6's Reference tests fail 34, 35, 77, 78 and 81 (STEP export finds fillet edges
4.6e-5 to 6.1e-5 off their surfaces against 2e-5), 37 (the apex blend 0.193 off), 80 (the
taper-to-fit area) and 83 (thicken status 1001). Each expected.json names its cause in
known_failure, which the oracle already reads: a known failure that passes fails the job.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sweep path: a curve of several pieces is turned round whole
The path chain oriented its first piece, not its first curve: a first curve
of several exact pieces (a fit spline, an ellipse, a projected free-form
edge) was never turned round, so a path whose next curve meets it at its
start was refused as "not connected end to end". The chain now orients
curve by curve: the first runs toward the second where they meet at one
end only (else from the end nearest the profile), each next one starts
where the previous ended, with one joint tolerance for both questions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 2fc375f (tangency-labs/smlib#71, #72, #73)
A sheet's side is extended exactly the distance asked, or the call says it cannot (#71);
NVIDIA's -Werror build passes again (#72); a body splits by a sheet of several faces as it
is, smlib_split_body_by_sheet (#73). The C API is ABI 6 (the new entry), so the binding
expects 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Extend grows a surface of several faces face by face
A surface body of more than one face (a fit-point spline's spans extruded, #3830) was refused.
Each face with a picked edge is now extended alone by SMLib's extension of its surface, and the
faces are sewn back together, each the face it was. A side that lengthens onto a face meeting it
tangent takes that face along, past its edge continuing the picked one; across a crease the
neighbour grows only when its edge is picked too, otherwise the extension is refused. Faces whose
lengthened sides no longer meet are refused. Up to a target keeps the pieces every grown face
lies in.
3830's extensions now build; its split still fails (the tool point picks one span, and a face
tool cuts with that face's surface alone), so it stays on the list with that reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
A face tool cut with that face's surface alone, so a face of a surface body made of spans joined
tangent (a fit-point spline extruded, #3830) cut nothing where its span ends inside the body.
Split Body by a face of a surface body now takes the faces joined to it tangentially (the exact
check Extend uses, within the one angle for smooth) and slices with them as they are, through
SMLib's slice by a sheet (smlib_split_body_by_sheet, tangency-labs/smlib 7a01f1b), its sides those
of the picked face. A sheet that only nicks the body cuts nothing, as before; a lone face, or a
face of a solid, still cuts with its surface extended.
3830 comes off the booleans list. Its answer counted the two halves of the cup and not the surface
that cut it, which stays as a body of its own (4879 removes its surface for that reason): three
bodies, the volume unchanged.
Needs SMLib 7a01f1b pinned (SMLIB_REV, prebuilt; its SMLIB_ABI_VERSION 6, which crates/smlib now expects) to link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
The tangent and curvature run-offs of the quarter cylinder r 10 strip, 5 across the surface,
are its section swept 20 along z: exactly 10 pi/2 20 + 5 x 20 = 414.159265. measure is SMLib's
integration on the exact surface (1e-8), not a mesh, so the run-off check is 1e-6 relative and
the 'measured on meshes' notes go. Red until SMLib's extension is solved to its distance
(smlib-extend-converges 590d8a1): eaa998a's curvature run-off is 4.986 long, area 413.882.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a control spline can carry its own knots and weights
A sketch spline over control points was always the clamped uniform B-spline
over them, so a free-form edge whose knots are not evenly spaced (or whose
weights are not 1) could only come into a sketch as one curve per Bezier
span. A control spline now may save `nurbs`: its clamped knots and its
weights. Its points, polyline, exact pieces (one a knot span; conics for a
rational quadratic), the solver's distance and curvature, links, parallel
re-projection and inspect.sketch all read them; a loaded design's are
checked. One pending format file (spline-knots).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch projection: a free-form edge comes in as the one exact spline it is
A projected spline edge of several Bezier spans came into the sketch as one
curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path
naming the corner named one span of it (#3604). The kernel now reads such an
edge (a spline, or an elliptical arc of several spans) as the one clamped
B-spline it is over the edge's interval, its knots and weights its own, and
the sketch takes it as one control spline whose ends sit on the edge's
vertices. Planar regions still read edges span by span. The 3604 case builds
with its original path and leaves KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
The owner's ruling: a round or chamfer that runs past an outer edge of its face into open air
builds, tangent where it has room and cut by the face beyond where it runs out. SMLib's branch
smlib-blends-past-rims builds them by the rig's analytic answers. Off the known-failing list:
the disc's rim past its 2 mm wall (190), the hole's top rim R12 past the plate's bottom, the
chamfer past the cylinder's bottom (2893), each closing on the wall continued as itself, and
926's chamfer ending on the boss's wall, which now builds to its answer too.
The sloped basins' R4 rim rounds (1080, mitred rounds built together where one overflows) build
to their analytic volumes (to 6e-9), and stay listed with that reason: their continuity check
(g1 at every blend seam) takes in the mitres' creases, G0 by the mitre ruling.
2893-chamfer-two-distances-elliptical-rim is graded as a solid (the owner: it builds) and stays
listed, waiting on the ruling on unequal chamfers along a rim whose angle varies.
5158-fillet-round-just-past-a-10mm-face stays listed with its cause found: the round passes
5e-6 under the box's top back edge, inside the body's tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: test that a round of a round's end has no seam with that round's faces
The r1 round of a block's top edge, chained onto the end curve of the r2
round of its arc at a cylinder (rig fillets/every-block-cylinder-crease-
top-edge-after-arc-round-r1), ends where it runs into the cylinder. That
edge is no seam of the r1 round: the cylinder is a face of the r2 round,
not of the r1. blend_seams takes it for one today (the r2 round's name
F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a
contact seam at 60 degrees.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: a blend's seams split its edge's name at the | between its two faces
A blend face's name holds the edge it replaced, <face>|<face>, and a side
of that edge can be a blend face whose own name holds a |. Whether a face
is a contact of the blend was read as the edge's name starting or ending
with the face's name next to a |, so the r2 round's own face F2:side read
as a contact of the r1 round F4:blend:F1:+y|F3:blend:F1:+z|F2:side. The
edge's name is now split into its two faces, a blend side read whole as
the two faces of its own edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: five refused blends build, off the known-failing list
926 (the chamfer ending on the boss's wall), the oblique cut's r0.1
round, the every-block r1 round (its seam with the cylinder is no
contact seam, after the blend_seams fix), the up-down squares' concave
chamfers and the shelled box's lip chamfer build with SMLib branch
smlib-blend-refusals (f8650b8 and later). 1207 r0.5 passes SMLib's check
on its rails now and stays listed for the next cause: its end rib on the
boss, which starts where the round and the boss are tangent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the trough and the pocket whose floors fall to a drain build
SMLib now offsets a vertex where four faces meet (two walls and two facets at the floor's
corners, four facets at the drain) to two vertices joined by a new edge (tangency-labs/smlib
branch smlib-shells). Both volumes match their closed forms. The pocket's lining, hanging from
the top's rim round the pocket, stands apart from the slab's outer walls with the cavity rising
between them to the open top: the case says two shells in the one body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the plate with a hole through its arc side shells open at its far end
SMLib's merge now intersects the offsets of an edge's faces where they could not be mated along
it (the hole's offset poking out through the half-round side's; tangency-labs/solidcore#1795):
one closed valid solid with the one face open, as the owner ruled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the ring cut frame and the up-down join shell
SMLib's inset now keeps only the regions that are cavity, not the one the offsets close where
they overlap (between the two faces of #545's 0.5 floor, round the up-down join's two empty
octants). The frame's core under the recess is hollowed to a sealed void, so the case says two
shells and its closed form, 21044 mm³.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
SMLib keeps the skirt top's offset where its loops wind the other way under the opening, the
cavity's floor (the owner's ruling of 2026-10-31: build it; a lip thinner than the wall is no
break-through).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
The ring cut frame's and the up-down join's shells build now, and so do the up-down join's and
modern-plastic's chamfers (SMLib smlib-blend-refusals). #616's lid in the corpus still fails
SMLib's loop check, the shelled box shelled again at an inner wall is unchanged, and the
oblique cut of a cylinder's fillet still fails SmSurfOfRevolution's Test #7: 3 actions of 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib history test: every operand's order is the identity on its record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: rustfmt the board fixture example and the coplanar asserts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: fillets keeps one case per regime; 17 replications of a case in the same regime go
The sloped-basin chamfers and rounds at 0.5 mm rims repeat the 1 mm rim's regimes; two of the
three knife-edge chamfer tips, the r1 and box r3 curvature corners, the r1 tangent corner, the
1 mm pocket-rim and hole-rim chamfers short of the floor and the r1 together-round each repeat a kept case's regime
and grades. #854 moves to 851-chamfer-arc-top-edge-9-5, and the cases that cited a dropped one
cite the kept one or state its formula.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: five cases outside fillets repeat a kept case's regime and go
A square cut is the slanted plane's ordinary crossing; the cam's half turn is the quarter turn's
contact at a symmetric angle; the r15 slab stands inside the same coincidence tolerance as the r10;
the 90 degree unfold and the 40 degree flange repeat the 72 degree and 20 degree cases' formulas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two G0 window patches graded on the box the part they close keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the cut mirrored loft graded on the box its sections pin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases
wait for the new algorithm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by seams alone runs its loop the other way, never turns over
A loop that uses each of its edges once each way (a whole torus within its tube and ring seams)
is the same set of uses run backwards, so it says nothing of the face's side. One written
clockwise in (u, v) turned the face over, against its same_sense: the torus came in inside out
with a warning. Such a loop is now reversed and the face keeps its side.
Test: seam_only_torus_imports_as_a_whole_ring, both orders of the two seams, volume 2π²Rr².
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by a slit alone is the whole of its closed surface
A loop that runs out along a chain of edges and straight back (a meridian from a sphere's pole
stopping short of the other, out and back) encloses no (u, v) area, yet on a closed surface it
bounds all of it less a cut of none. The reader only read such a face when the slit already ran
pole to pole (and moved the sphere's frame onto it only then), so the 2 mm ball whose meridian
stops at 2.5 rad was refused for its empty loop.
The slit is now made the face's seams, so its loop bounds the surface's whole domain: on a
sphere, a revolution whose profile ends on its axis, or a spline closed round u that collapses
at both ends, the slit's meridian is run on to both poles, out and back (a sphere's frame put
on the slit first, whichever two points it joins); on a torus, the circle the slit lies along is
closed and the other circle through its start is the second seam. The seams on a sphere are its
own meridians (angle 0 on the equator), so their pcurves are exact lines on its form.
Tests: non_antipodal_seam_sphere_imports_as_a_whole_ball passes (its known-failing line goes);
seam_only_torus_imports_as_a_whole_ring adds a torus bounded by a slit along its tube.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues:
the reported part's bar (with the sketch solver's residues) whose sides run tangent into the
cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face
bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight
box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch
stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg corner at r5 and r7
Two more fillet cases, the reported part's concave arc and front top edge rounded together at
r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's
tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the
bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: blends that end where their face runs tangent into another
Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far
end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent
into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top
tangentially there. Each blend ends on a face tangent to the one it rolls on.
- Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at
r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a
semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and
G1 seams, or the analytic volume where the blend has a closed section.
- Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along
x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after
the other (1 then 2).
- STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges
rounded together.
- A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator,
its front edge alone and both edges together.
The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic
cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not
along a seam, so it is not this ending.
On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status
1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5
out of the front face, and the rounds meeting with normals 180 degrees apart where their
contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted
peg (its corner refused as unsupported).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: fillet corners graded curvature-continuous, the default to be
Six fillet cases that pick their edges with no type, so they take the fillet's default, which the
owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as
an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body:
- an oblique convex corner (a block drafted 15 deg);
- a four-edge and a five-edge apex corner (pyramids lofted to a point);
- a pocket's concave corner;
- a mixed corner (a step: one concave edge, two convex);
- a corner beside a cylinder (the top corner of a half cylinder).
All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round,
whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two
rounds at 8.45 degrees (G0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's front chamfer builds
With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge
crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that
carries that fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the curvature-continuous corner cases pick the curvature fillet
The six corner cases added in 3a854104a took the fillet's default type, on the premise that the
default would become curvature-continuous. The default stays the circular round, so each case
now asks for the curvature fillet itself (type curvature: curvature-continuous sections and
corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one
valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*.
The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as
KNOWN_FAILING now says:
- the corner beside a cylinder: the curvature fillet builds its sections only between planar
faces;
- the four- and five-edge apex corners: refused because the default setback is shorter than
where the rounds' contact lines meet (3.90 and 3.51 mm from the apex);
- the mixed corner: SMLib sets back a corner only where its edges are all convex or all
concave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the
concave chamfer's rail on the cylinder ends where it crosses the seam along which the front
face runs tangent into the cylinder, continued past the vertex, and its end rib on the front
face is built from there. report-peg-concave-chamfer-d2 and
report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two
chamfers together still fail, now at the mixed-convexity corner where they meet: its line says
so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168,
kernel lib only its listed failures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: constant rounds of the exact classes, and a tee's round
A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a
cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines
are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2),
(2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on
its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that
SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
The rounds now come as the rational surfaces their classes give, closed ones as two faces split
at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees.
Their KNOWN_FAILING lines go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
Twelve listed cases build on the new blend's end event and exact classes, or were already
built on develop: they come off the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the
round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and
graded on the exact volumes, and come off the shell known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Drawings hidden lines: read develop's B-rep records
Edges come from the record's edge list, cut to their interval (C3::of_edge), and
faces from its face list; a cylinder, cone, sphere or torus chart takes its bounds
from where its NURBS form lies on its label (S3::of_face). A rigidly placed
revolution has main's revolution chart; other placements stay refused. Moving a body
to its centre goes through Brep::moved. Loops are read against the natural normal of
the face's parameters where a chart wraps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden-line fixtures: build develop's records from the fixtures' data
Fixtures keep their bounded curves and surfaces and their own edge numbers; a private
builder makes the canonical record, and the local prepare puts the edges back in the
fixture's numbering. Assertions are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: tests of the bounded edges, face charts and placed revolutions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* drawing-hlr doc: what is drawn and refused on develop's records
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* hlr tests: a placed revolution is refused when its placement is not rigid
The new model has one record for main's Revolution, which was drawn, and its
PlacedRevolution, which was refused. An identity placement is now the former, so
this test's fixture takes a non-rigid one. The refusal it asserts is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
A leader off either surface is refused like a curve with no spline to follow. Tests: a traced rim
drawn on the circle and plane within tolerance, the same leader 1 mm off refused, and kernel bodies
with arcs through the production prepare against closed forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: kernel bodies through the production prepare against closed forms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Tests from main: the world state is a Result here
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A blend's pick measures close edges on their curves, not their polylines
A polyline can be a chord off its edge, more than two edges are apart near a
tangent point. A pick exactly on a ball's rim took the straight edge the rim is
tangent to, and solidcore built a chamfer of that edge with a clean check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
(cherry picked from commit c786db6bf4)
* Merge fixes from the first SMLib test pass
Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step).
A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another
order, and the swap left the name on a piece of the wrong feature.
A replaced analysis keeps its status slot. A command with no world picks does not place the model
first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the
touching key the merge added; only the contracts that read it take it.
Two of main's tests listed as failing on SMLib, with why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Merge fixes from the ui test pass and the gates
Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the
messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's
comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its
tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay
pressed while on. Two of main's ui tests listed as failing on SMLib, with why.
Gates: fixed thread tables become slices, one collapsed if, rustfmt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A silhouette takes its facing from the surface's normals
A flat triangle beside the outline can tip the other way from the surface it approximates, and its
edges joined the outline. On SMLib's sphere that made 192 segments instead of the equator's 64, 100
curves and 95 profiles from the tight fit of #7989. Each corner's normal is used where it is close
to the triangle's own; a mesh without such normals (none, zero, not numbers, or averaged across
creases) keeps the triangle's normal, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Clippy and rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Stepwise open checks every feature under the session's mode
OpenSteps::start evaluated under the default check mode, and finish kept those results under the session's mode: an each_step or off session opened in steps recomputed nothing. start now takes the mode (the app passes its session's), and a mode that changed before finish evaluates the design again under the new one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Clippy without SMLib: the planar-sheet edge reader is built only with it
Its one caller is in the smlib-only sheets module, so without the feature it was dead code and
clippy -D warnings refused the kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
Eight fillet cases for the blend's cross-section by its order of contact with the faces, each
graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next):
- a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the
areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default
thumbweight's definition;
- a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of
the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each
section's added area by Green's theorem along the plate, the section and the pipe's arc; the
order-2 section is built from the faces' feet of the point at distance d from both, which on
the pipe are not linear in d;
- a boss root curvature-rounded 2, the square corner's section revolved (Pappus);
- a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone,
and the volume is the cone's sections integrated along the edge.
Three fail today and are listed: the two curvature rounds whose faces are not a square corner of
planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the
variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib
7ac037e.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two
planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment
about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases
built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket,
every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their
volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x
up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the
distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and
G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on
the plate pass on SMLib's section and leave the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a
square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests
and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate
from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed
until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4):
Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns
the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded
less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to
1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet
takes a turn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the
ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the
blend rework too) and the Y junction (refused for room at its triple points).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope
removes; the law with a corner is its own test, listed as failing until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
removed_by_balls integrates, in each plane square to a right-angled edge, the corner the union
of the balls leaves (by rays from the edge, the least entry over the balls), cut to the body's
section. The law with a corner through a middle point is its own test, listed as failing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: a spline radius whose balls fold over one another at its peak is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within
1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed
as failing passes on SMLib's step 3 and leaves the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
The new section builds their edges on the surfaces, so STEP export no longer finds them 4.6e-5
to 6.1e-5 off. develop's Reference tests (60393a718) report all three as passing while marked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
A sphere split into two halves along a circle about its axis, each half covering a pole with no
seam, gets a seam per half from the first vertex of its loop to the pole. The circles between the
halves group their frames so they turn together, and when the two seams are not a whole number of
quarters apart no one turn fits both: the group kept its frames, a half's form ran past one turn,
SMLib's trim (SMLib and solidcore alike) across the form's end crossed the face, and the mesh
folded over the ball (a rotor's ball showed torn; its half had 196 times its area in triangles).
When no one turn fits the group, each spilling face is now turned on its own to start on a quarter
line. On the rotor file this also clears three other faces that were filled leniently and a
0.076 mm edge gap; regression test in step_in/tests.rs with the area and volume of each half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
(cherry picked from commit b3188e005d427043b918267449c2336a1777e54f)
* SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
A variable round is the envelope of the balls rolled along the edge, which takes less than a
quarter round in each section. The expectations are now that union, the law continued past the
edge's ends along its end slopes, integrated by Gauss-Legendre panels in x and t; 2, 4 and 8
panels agree to 1e-9 of the body's values, and 77's removed volume matches a brute-force union of
balls to 2.5e-10. The nearest-ball search now scans the balls the ray meets around ball x
(|x - s| < r(s) sqrt(sin 2t)) on their own, which near the faces and where 78's radius closes to 0
are narrower than the global scan's step. Regenerating keeps each case's known_failure. 79, a
constant radius, is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
SMLib builds a variable round's law corners as its balls' union (the corner
ball's zone at a dip, the sides' crossing at a peak): the kernel's corner
through a middle point (39.5410) and the crate's 4 -> 2 -> 4 law (39.5421) pass.
Rig 1207 (the bar's top edge rounded after the boss's arc, r0.5) builds and
grades on the same SMLib; it failed on c820346.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: every fillet and chamfer case rounds its tangent chain
The owner's ruling of 2026-11-01: the rig and the ladder round with tangent_chain true, how a
user's default pick behaves. The 38 fillets-area recipes and the ladder's 07-fillets/016 and 018
that passed false now pass true. The shell recipes keep theirs: a shell's tangent_chain is its
open-face chain, a different feature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
Where a case's point is one edge of a tangent chain rounded alone, a copy keeps tangent_chain
false as its own case (SMLib rounds exactly the picked edges, ending at the smooth vertex); their
expectations stay as they were, to be re-derived:
- fillets/1207-fillet-box-end-edge-into-unblended-round-partial-chain;
- fillets/every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain;
- fillets/1207-fillet-bar-top-edge-after-boss-arc-round-partial-chain, renamed from
...-no-tangent-chain: with the chain on it is exactly 1207-fillet-bar-top-edge-after-boss-arc-round,
which the rig already has;
- ladder/07-fillets/020 and 021, the r5/r3/r7 and r5/r3/r2 corners (016 and 018) with the r3 on
its edge alone: with the chain on, the r3 runs on along the r5 round's end arc and down the
vertical edge the third round was to take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
fillets/every-block-cylinder-tangent-concave-arc-r2-partial-chain: the pick takes one piece of the
concave half circle, which SMLib splits; with the chain off its other pieces are left out, and the
blend is refused at the piece's end (the base gate's outcome). With the chain on the case rounds
the whole half circle. The copy keeps its expectation, to be re-derived.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two chains that now build graded by their exact volumes
With the tangent chain on, two cases round more than the edge they pick, and their old
expectations were the single edge's:
- 1207-fillet-box-end-edge-into-unblended-round: the r1 chain is the end face's top edge, the r3
round's end arc and the back upright; 34 A + (pi/2) A (3 - c) by Pappus on the arc:
V = 7953.139216 (it built 7953.139216, the old 7957.505 passed only inside 1e-3), 10 faces.
- 851-fillet-top-front-then-front-left-upright: the upright's chain runs up the first round's
end arc on x = 0 and along the left top edge, so the corner becomes the R2 ball's eighth:
V0 less the first round's spandrel to the wall (35.344727) less 27 (4 - pi) + 2 pi/3:
V = 9530.777979 (built 9530.777987), 10 faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
- every-fillet-after-fillet-curvature-front-then-side-r3: the side edge's chain runs round the
first curvature round's end curve, whose radius of curvature has a weighted mean of 3 (its
setback) and is unbounded at the ends, so somewhere below 3: the size-3 blend's contact line
folds back on itself. Refused, "larger than the faces beside its edges allow", as ladder
07-fillets/016's r7 on the r5 arc. (It was solid or refused for running on tangentially.)
- every-block-cylinder-tangent-concave-arc-r2-no-tangent-chain: the chain takes every piece of
the half circle and ends at the convex edges it runs on into; it builds the analytic 19091.9620,
so the outcome is solid (the refusal alternative was the chain-off one's).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright: with the tangent chain on,
each R2 chain runs along the end curve of an R2 round on a curved face (the arc round's end on the
front face; the first round's end on the wall), where the rolling ball sits on that round's own
centre line, so the piece is the ball about (39.2538, -19, 8): the three-edge rolling-ball corner.
SMLib fails with status 1001; the same piece on a plane end arc builds (front-left upright).
Expectations unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
With the tangent chain on, 016's and 018's r3 runs on along the r5 round's end arc and down the
vertical edge, so the third pick (60, 40, 8) is 3 from both of that round's contact lines and
names no edge: refused, asking for a point along one edge. The corners they were made for are
020 and 021 (the r3 alone), whose golden entries are 016's and 018's (021 measured on f12a101).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
SMLib's Ball corner is always the rational patch exactly on the sphere (owner ruling, blend
design §23), so the corner counts as an 'other' face beside the three cylinders and six planes.
The removed volume still checks the corner against r³ − πr³/6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
The round's cylinder keeps the frame it was made on when it is turned (SMLib's SwapUV no longer
re-derives it): its origin sits at x = −20 on the same axis line, (x, 2, 8) along x, radius 2.
Same cylinder; one number in the record moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
On the CI runners the boss root and the hole rim, both size-2/size-1 curvature rounds, build
correctly but take more than 180 s: the order-2 section's span certificate and the round's
definition are evaluated station by station. The per-case limit is the one the thread cases use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Lid ring sketch test: find the ring under the pick, not by main's kernel's name
On SMLib the lip join's exact history names the lid underside's ring a piece
of the lid's own start (F14:start#[...]), as the naming rule says for a face
that came from the feature's input; main's kernel named it after the case's
top it rests on (F2:top). The test looked the ring up by that name and so
stopped before the attachment it guards. It now takes the underside piece
under the pick point, which the cap certificate attaches on either kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Viewport culling test: each box's triangles from its mesh, not 12
SMLib meshes a 10 mm box in 108 triangles, so the hard-coded 12 a box stopped
the test before it reached the culling. The expected counts are now each
body's span in the scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Timeline chip test: a fillet that really reduces
The R20 fillet with fit reduce on one top edge of a 10 mm box builds on SMLib
without a reduced-radius warning, so the fixture had no warned feature. It
now rounds the four vertical edges at R6, reduced to the full round (5), as
the copy-warning test beside it does, and checks the warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
A seam's two sides are the same face, and edge names list each face an edge
bounds once, so SMLib's extruded circle names its side's seam F2:side:c1, with
no separator. The name grammar now says one face also means a seam. The #5858
test no longer counts one '|' an edge: every part of every edge name is a
whole face name of the edge, one per face it bounds, two for the rims and one
only for the side's seam (checked to run bottom to top on the circle).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
SMLib's setback corner takes a G1 fill only once certified convex, and refuses a setback too
short for that as SMLIB_ERR_NO_ROOM with SMLIB_FIT_SETBACK_AT_LEAST, the smallest setback that
builds. The kernel reads it (solidcraft-smlib binds smlib_blend_fit_size) and names it; the
Fillet dialog says it in plain words. Other room refusals keep their words. The r5 box corner
set back 5.5 is refused naming 5.962, which builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
Each round runs whole to its section square to its edge at its setback (the owner's rule, at
least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the
setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1.
Outside the box the sections span the body is the three strips', so its volume is theirs within
that box's. A later r3 round at the mitred corner makes the body all three at once make
(7928.142563938, 15 faces), as the engine and the model-cache tests have it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
A primitive cut skips the sheets kernel::apart (exact bounds grown by the record tolerance)
finds clear of its tool; the bend check leaves the clear case to kernel::boolean, which answers
it from the same exact boxes with no intersection work. The mesh-box helpers are gone, and their
four lines leave xtask/mesh-decisions.txt (172 sites left).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: AGENTS.md loses a stray merge-conflict marker line at its end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
Main made vi a complete catalog; develop's new message (ui.fillet_error_setback_short) had no vi
entry, so every_complete_catalog_carries_every_english_message failed on the merged tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
1213: the loft is a cubic skin through the five sections (ellipses between
them), not a torus; its volume 131601.597487935 by quadrature less the exact
rolling-ball removal 233.662461919 gives 131367.935026 (was a Pappus estimate
on a torus, 131360.148, at rel 5e-4).
4782: the section's area in closed form, 25 pi/3 - 5 sqrt(75) + 25, so
V = 630.2934873 (was a grid estimate, 630.293125).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
They take 37 s and 34 s alone on the box, but CI runs 8 cases at once on slower runners. Their
G2 certificate cost is the open item (tangency-labs/smlib#106, moved to solidcore#2344).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
Develop's list was taken on develop alone. Main's code (tap-marking reach, cut and hole box
checks, join pieces, print faces, placed measuring, selection items, imported mesh payloads) and
the branch's own exact_edges and named_vertex use meshes too; three listed functions were renamed
by main (face_outline and plate_recesses into FaceSlice, paste into build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* After the merge: main's new tests on the SMLib kernel
- Cut To the far side of a curved wall (#8634): the tool stops past the first crossing of the
face ahead of the profile; SMLib's whole bore is one face that a line crosses twice, so the
single-crossing rule found none and the cut took nothing.
- Clearing view analyses goes through refresh_display, as main's #10687 made the others, so an
open feature editor keeps OK and Cancel after Zebra.
- vi, a complete catalog on main, gets the setback-too-short message.
- fillets/KNOWN_FAILING: 4782's cause is now its continuity check (SMLib f916a8d builds the
expected volume).
- Known failing, as main's tests assume truck: the spline wall's spans as one mesh patch, a
hole touching an edge at a point leaving one body, and a copy of a copy's triangles matching
a fresh mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
A twist about a straight path maps a profile circle centred on the path's
line onto itself, so its swept wall is exactly the cylinder. The skin
through the stations stayed within 3.9e-9 of it (6.6e-9 on the outer wall),
and a boolean with another body on that cylinder failed with status 1001
(solidcore#2184; the kernel's handling of a B-spline face lying on a
cylinder stays open there).
sweep_controlled now builds those walls exactly when the path is lines
along the profile's normal and there is no end scale or rails: a profile
whose every loop is such a circle is swept untwisted, and such holes in
another outer loop are cut as exact cylinders from the skinned sweep of
the rest. Other loops, and an axis-centred arc inside a loop of other
curves, are skinned as before; a failed cut falls back to skinning all.
Regression test in smlib_sweeps_tests.rs: #2184's tubes joined at 10, 16,
18, 20 and 30 degrees give one closed body of 11.5625 pi with cylinder
walls; a twisted hexagon with the bore keeps a cylinder bore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU
* After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- `hole_misses` (main's #10701, through brett's branch) decided from the targets' mesh boxes. It now uses their exact boxes (`Body::exact_bounds`). An unknown box still leaves the hole not known to miss.
- With #10303's two shortcuts and `hole_misses` off the mesh, `body_box`, `mesh_box` and `padded_box` have no caller left, and are deleted.
- `project`'s intersection link passes its one face to `meeting_edges` as a one-element patch. This branch picks one face, not #9009's mesh patch.
- xtask/mesh-decisions.txt drops the six sites that no longer use a mesh here: `apply_traced_with`, `cut_end_past_face`, `beyond_cylinder_reach`, `hole_misses`, `body_box`/`mesh_box`/`padded_box`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
`frames::split_move` returns a Result on this branch: an unplaceable model is an error, not a silent no-split.
- Move/Copy of a component (main's #9914) propagates it, as its other calls do.
- `to_local` had the solid.move check twice after the merge (brett's Option one and ours). Ours stays, after the no-picks/not-placed return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: main's two new tests take world_state's Result, as the rest of their files do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it.
Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere:
- Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre.
- Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`.
- STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included.
- Iso curves and SSI of the label are refused; the face's form is what evaluates.
Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds.
Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Since f916a8d:
- #120: every target again, plus the warnings fix;
- #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit;
- #122: tests gated on counts;
- #123: the Mixed corner;
- #124: the End at a smooth vertex;
- #125: four or more rounds, and open setbacks;
- #126: the equal-area thumbweight guard;
- #127: the trunk merge.
The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* smlib export tests: rustfmt's line for the rounded cube's edge midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all.
New failures, recorded as they are, each with its reason. They passed on f916a8d.
- **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume.
- **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only.
- **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added.
Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input:
the union's post-process keeps pointers to edges it has deleted. A golden
entry's `unstable` reason makes the gate compare that case's status only
and name it in its output; recording keeps the reason, and only an edit of
the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge with main: its new code on develop's exact bounds, types and thread fields
- The sheet cut's cull (#10301) and the tapped wall's (#10227) use each
body's exact box (`exact_box`), not its display mesh.
- model.threads replies with develop's thread fields: form, hand (right,
left or both) and starts.
- surface.boundary's schema checks a network curve's continuity as the
handler does, and words a list entry's error as it does.
- Main's new tests take develop's Hole fields and world_state's Result.
- mesh-decisions: contact_sweep's triangle check is now `depth` (main
split `hits`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now
Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that
passed on f916a8d, and passes two listed ones. Each new line says what the
test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause.
shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and
oracle 37-pyramid-apex-blend pass and leave their lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's six new sketch-only commands are exempt from a kernel case
sketch.construction_line (and its horizontal and vertical forms) and
sketch.spline.insert_point, remove_point and reverse change only the 2D
sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- The per-target cut loop skips a body whose exact box lies clear of
every tool's, as main's version did with mesh boxes. The sheet culls
(#10226, #10301) and this one now leave the far sheets and bodies alone:
a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the
known-failing list.
- a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face:
a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is
far past the bodies' tolerances); touching and 0.1 mm in still cut.
- Known failing, with reasons: main's edge lookup by a stored point
(#11286, on the display mesh) is not taken; SMLib refuses the
wrong-way chamfer for its tangent chain first.
- EXEMPT: main's eight new sketch-only commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
62 of the commands main added change no geometry: the view and render
panes, rendering lights and results, appearance tools, settings profiles,
point clouds (drawn as points, never a body), the selection, two sketch
edits, component links and History bar visibility, edit.repeat,
timeline.play, inspect.compare_picture (a picture against the outline),
and component.paste_from_design, which pastes the app's cross-window
clipboard that no command fills. Each joins EXEMPT's first section under
its family's reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: construct.plane.axis_point gets construction cases
The plane through a box edge and its far corner, graded against its
closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal
of a point on the axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass
0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2
by the parallel-axis theorem.
- occurrence.align: a block's end face onto a base's top face: a quarter
turn about y, centre (70,20,20), box (65,15,10)-(75,25,30).
- joint.find_limits: a slider between two stops: min -20, max 10 mm.
- component.move_features, browser.reparent and
component.move_sketches.to_parts: items moved into a turned and moved
part keep their world place (volumes, centres and boxes by hand).
The mass case assigns a material it creates, so material.create and
material.assign leave EXEMPT. PATHS names the new command modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: export and print face cases in the import area
- file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box
written and read back (the meshes converted to a solid): V 6000,
A 2200, 6 faces, box (5,-10,0)-(35,10,10).
- file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints,
and the base's mesh, written in metres, reads back as the
1 x 0.5 x 0.2 box (V 0.1, A 1.6).
- body.print_face: a cylinder's flat end is accepted, its side refused.
PATHS adds the URDF writer and the print face modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: brett19 <brett19@gmail.com>
39 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. These commits sit on several merged branches, so the wave holds their combined result.
- 1b17dd7f5 brett19: Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
- 8f2c11da2 brett19: Drawings hidden lines: read develop's B-rep records
- c30ca0216 brett19: Hidden-line fixtures: build develop's records from the fixtures' data
- 5dd2509ae brett19: Hidden lines: tests of the bounded edges, face charts and placed revolutions
- 1642df0ea brett19: drawing-hlr doc: what is drawn and refused on develop's records
- ddcb80c8e brett19: hlr tests: a placed revolution is refused when its placement is not rigid
- e4977721f brett19: Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
- b3ef6ae52 brett19: Hidden lines: kernel bodies through the production prepare against closed forms
- 4cd2ae062 brett19: Tests from main: the world state is a Result here
- 51d7ad09e brett19: A blend's pick measures close edges on their curves, not their polylines
- 11a89713c brett19: Merge fixes from the first SMLib test pass
- 48fcb7aac brett19: Merge fixes from the ui test pass and the gates
- abd739855 brett19: A silhouette takes its facing from the surface's normals
- 85114c5a2 brett19: Clippy and rustfmt on the merged tree
- 55a46569f brett19: Stepwise open checks every feature under the session's mode
- 4627402e4 brett19: Clippy without SMLib: the planar-sheet edge reader is built only with it
- 5fbece0ac brett19: STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
- eb78d20b0 brett19: Lid ring sketch test: find the ring under the pick, not by main's kernel's name
- 3048d8c49 brett19: Viewport culling test: each box's triangles from its mesh, not 12
- dc88b80e2 brett19: Timeline chip test: a fillet that really reduces
- 876203621 brett19: Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
- 900635710 brett19: rustfmt on the merged tree
- b7e83cd7c brett19: Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
- 63bde053a jyviko: Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
- 967a1caa6 brett19: Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
- 82c821d2a brett19: After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
- 5862ee223 brett19: After the merge: main's new tests on the SMLib kernel
- be78372b2 brett19: Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
- 312d14500 jyviko: After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- 6f7e51acb jyviko: After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
- 8f0c79b20 jyviko: After the merge: main's two new tests take world_state's Result, as the rest of their files do
- 5f4d70061 jyviko: After the merge with main: its new code on develop's exact bounds, types and thread fields
- 2b2ab6627 jyviko: Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
- e6a4b0a9a jyviko: Kernel rig: main's six new sketch-only commands are exempt from a kernel case
- 5acbd2e71 jyviko: Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- d2b202307 jyviko: Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
- 21db090ba jyviko: Kernel rig: construct.plane.axis_point gets construction cases
- c1f45cae2 jyviko: Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- 084695416 jyviko: Kernel rig: export and print face cases in the import area
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e01031bc jyviko: smlib export tests: rustfmt's line for the rounded cube's edge midpoints
- c29190ec3 jyviko: Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
- 62d372cc1 jyviko: Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
- 2bf58241f jyviko: Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- b8fa0d8aa brett19: Known failing on solidcore after the f916a8d sync; blend_fit in the entry-point guard
- 5a93e6c4d brett19: Make the C++ SMLib kernel opt-in at build time (feature smlib, off by default)
- 29a148abd brett19: CI: build without the C++ SMLib kernel except where a job needs it
- e30cfd2ac brett19: Tests and the rig for a default build without the C++ kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3902c954 jyviko: SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 4c1eed960 brett19: Tabbed plate: the rim and one corner arc round together (solidcore#2223)
- dd00ff989 brett19: Native wire fixture: a box edge round's cylinder keeps its own frame
- 584075662 brett19: Known failing on solidcore after the smlib merge: SMLib 5e8c9c1's new blend (solidcore#2273) and main's new tests
- 8af1fdf5a brett19: Known failing on SMLib (the .smlib list): as the smlib branch lists them at f916a8d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 597b23ba8 jyviko: Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
- 820b7b667 jyviko: Agents: AGENTS.md loses a stray merge-conflict marker line at its end
- 92734d7eb jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
- 653c16e6f jyviko: Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ad3ee0585 jyviko: Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
- 608d07eca jyviko: xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5136898b9 jyviko: Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
- e6db7be0a jyviko: Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
- 5d168a5e2 jyviko: Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
- 99953687c jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* docs: plan drawing workspace UI implementation
* assets: add drawing icon drafts for owner review
* feat(ui): add drawing workspace scaffold with shared ribbon and docked settings
Expose planned Drawing tools without introducing drawing documents, paper rendering or CAD behavior. Reuse existing source BOM, properties and flat-pattern services; retain placeholders for unapproved icon drafts.
Validation: full UI, kernel, icon, clippy, wasm and layout checks passed. Full cargo xtask ci reports three geometry failures that also reproduce on unchanged drawings base 3b982ca: counterbored chamfered-disc ring cut, robustness seed 36 and seed 71. No geometry source or golden fixtures changed.
* Preserve default icon palette in Drawing scaffold tests
* Preserve Drawing providers and complete scaffold translations
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aed047703 jyviko: Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
- 17de3569f jyviko: SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- f9fc68167 brett19: solidcore: a curvature fillet is the equal-area Gⁿ section; mixed wedges refused
- d52cf6b14 brett19: Known failures at solidcore adf26ddbc: curvature and variable rounds built
- 5ec92b0ba brett19: Move the solidcore pin to 2dbd88b6e
- 92618ac4c brett19: Turn on solidcore's new fixes at 2dbd88b6e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- e30e983c3 brett19: Move the solidcore pin to 4d3ce6264
- c8351719e brett19: Move the solidcore pin to adf26ddbc
- d33b6eb30 brett19: Turn on fillet_gn_section_generator
- 3b4adeb73 brett19: solidcore: a variable round is built again, as the union of its balls
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a4d9c31c jyviko: Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
- 303111e4e jyviko: Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
- c5332faf4 jyviko: Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
- 970446dec jyviko: Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 72109054c jyviko: Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
- f87305648 jyviko: Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
- 75efb8f0c jyviko: Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
- 68c3ccb75 jyviko: Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5cd5f303 jyviko: Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
- ea49dff48 jyviko: Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
- 38385ab5d jyviko: Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
- 459937e52 jyviko: Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
reference_margin_mm becomes reference_shown_percent, 0 to 100. At 0 the
boundary is the model's box, as before, and no reference part is measured.
At 100 it holds the model and all the view's reference parts. Between, each
side moves on its own, so a part on one side grows only that side.
The model's middle now places a view, not the middle of what it shows, so a
view stays lined up with its projected views as its box grows. With nothing
grown the two are the same point and the picture is the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views made by command: drawing.view.base and drawing.view.projected (#4816)
drawing.view.base {sheet, view?, scale?, position_mm?, the view settings?} adds a base view of the
drawing's design to a sheet. Without a scale it takes the largest ISO 5455 preset at which it lies
inside the sheet's drawing space, centred where it goes, its margin included, as the snapshot fits
it; that scale is saved as the view's own (1:1 with nothing to measure).
drawing.view.projected {parent, side, place?} adds a view projected from a saved view, on its
parent's sheet, following its parent's scale and display settings. Without a place it is lined up
with its parent, its boundary 20 mm past the parent's (DEFAULT_GAP_MM, until a drawing style
gives it).
Each is one undo step through edit_drawing, refused with nothing changed when the record's rules
refuse it; the reply gives the view, its sheet, its scale, its boundary and, when it leaves the
sheet's drawing space, itself as outside (it isn't moved back in). Unknown fields are refused.
One rule, one place: whether a view leaves its drawing space is drawing_view::leaves, and the sheet
of an id is drawing_view::sheet, used by outside() and both commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views made by command: a build fix, and each view one undo step, tested (#4816)
From the review of the view create commands:
- drawing.view.base measures the shown bodies (`measure` takes them, not the session), so it builds.
- The nothing-to-measure case is a design with one sketch and no bodies, as the other view tests
make it: drawing.create refuses an empty design.
- The schema test gives drawing.view.base its own key list (it takes no snapshot-only keys).
- Every view a test makes is checked to be one undo step, not only the first: a second step made
under the first (a nested edit) still let one undo take the view away.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 9f64cce54 brett19: solidcore: a variable-radius fillet is refused until solidcore builds the union of its balls
- bd4dc081d brett19: Known failures on solidcore after the merge: the refused curvature and variable rounds, develop's new cases
- c6fa7e563 brett19: Move the solidcore pin to c9a06dc7c
- de9a654db brett19: Turn on solidcore's new fixes at c9a06dc7c
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce8b01fa3 jyviko: Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
- 78ed75162 jyviko: Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
- ee3ed66a4 jyviko: Kernel rig: two chains that now build graded by their exact volumes
- f2ff6f0d4 jyviko: Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Paper scene: one walk onto a writer's number grid, for every writer (#4890, C4)
The SVG writer kept its own number grid: each coordinate whole nanometres, every joint written once,
a closed path ending exactly on its first point, slivers merged into the next piece and a path's
last piece kept. PDF, PNG and the Drawing workspace's canvas need the same rules, so they move into
`geom::paper::grid`, and the SVG writer only formats what the walk gives it.
- `Grid`: `per_mm` steps a millimetre. `Grid::NANOMETRE` (six decimals of a millimetre) is SVG's.
`Grid::new` takes 1 to 1e9; a power of two keeps every number exact as a binary float, which a
writer of 32-bit numbers such as PDF can use.
- `Prepared::on_grid(grid) -> OnGrid`: each group's items as paths of `Piece`s (lines, arcs of at
most a quarter turn, cubics, parabolas), y up as in the scene, a closed path's closing line left
to the writer's close, and a report of widths snapped and pieces merged. Slivers are measured in
the grid's own steps, so a coarser grid merges more.
- The SVG writer flips y on the whole numbers it's given and writes the same bytes as before.
`SvgReport` is the grid's report.
- Ellipses, hyperbolas and Béziers above degree 3 are still refused (A3b), now by the walk.
DXF stays on its own number rule for now: it writes exact entities (ELLIPSE, SPLINE) and is being
reworked under #5318 to #5321; whether its polylines take a grid is decided there.
Tests: every SVG test unchanged, bytes included; the grid's rounding and its bounds; the A3 border
on the grid (y up, closing line left out, fill loops closed); slivers in the grid's own steps, with
the merge boundary both ways (10 and 11 steps, a 6-8 and a 7-8 step); an arc's quarters with their
radius and turn in steps; a width under half a step made one step; an ellipse refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: a sheet PNG at a chosen dpi and colour (#4890 A4)
A new writer, io::paper::paper_png, that reads the shared walk on the
nanometre grid, the one the SVG writer uses, so a PNG draws the same joints,
closures and merges. Neither the walk nor the SVG writer changes.
- Curves are flattened within 1/8 px by geom::paper::flatten, which turns
each walked piece back into its Seg2 (an arc's centre from its ends, radius
and direction) and takes Seg2::chords' steps. chords is the bound
Seg2::polyline already used (the chord's bulge for arcs, Wang's bound for
the rest), moved out of polyline unchanged so both read one rule.
polyline itself doesn't fit: it floors an arc's tolerance at a millionth of
its radius and caps a piece at 4096 steps, coarser than asked without a
word (0.1 mm, 9 px, on a 100 m arc at 2400 dpi). Over 2^20 points a path,
or 2^24 a sheet, is refused instead. tiny-skia only gets lines: its own
flattening stops at 64 lines a curve, more than a pixel off on a large arc
at a high dpi.
- 25 to 2400 dpi (300 by default). 8-bit greyscale (the default), 1-bit
black and white (no anti-aliasing, every line at least a pixel wide), 24-bit
colour, or 32-bit colour with transparent paper.
- The file records its dpi (pHYs) and sRGB, so it prints at the sheet's size.
- Each line is stroked once, then the sheet is drawn in bands of 16 MiB of
pixels streamed into the file, so memory doesn't grow with the sheet. Each
band also draws a row above and below that isn't written: tiny-skia starts
an edge a little differently where a clip cuts it (one subsample, 16
levels, in a few pixels), so no written row sits on a cut and the bytes are
the same whatever the band.
- A line under a pixel wide (in greyscale and colour) is drawn as tiny-skia's
hairline, its coverage scaled by its width: its stroked outline would fall
between the rows the rasteriser samples and vanish.
Tests: the pixel size and pHYs of A4 at 300 and 25 dpi; a line's and a fill's
pixels at 254 dpi (butt ends, the fill's hole); each colour's PNG type, ink
and paper; a hairline between two rows' centres that is light grey in
greyscale and stays one pixel in black and white, and a bar a fifth of a pixel
wide that black and white inks by its centre; a closed outline joined at its
start; a 40 mm circle round to the pixel at 600 dpi; the same bytes drawn 1, 3
or 7 rows at a time or all at once, and again; the refusals; the flattener's
bounds and counts, and its point cap at the exact boundary; the scene-JSON
fuzz through the PNG writer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Geom: the pixel grid of a paper rectangle (#5624, W17b S1)
One rule for where a picture's pixels lie on paper, shared by the picture renderer and the writers
that place it: anchored at the rectangle's lower-left corner, rounded outward (W = ceil(w / p - 1e-9)
with p = 25.4 / dpi), so the overhang is at the top and the right; rows run top-down. At most
65,536 px a side; nothing caps the total, as pictures are drawn in tiles and strips.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures, and a sheet's pixel grid and windows (#5624, W17b S3; #4890 A9)
A picture on a sheet is `Item::Picture`: the rectangle it sits in, the name of its pixels
(`source`, opaque as a group's object id is) and its opacity. The pixels stay out of the scene: a
writer asks a `Pictures` provider for them on the grid it draws on. A PNG at 1200 dpi then gets a
shaded view drawn at 1200 dpi, not one stretched, and a scene stays small, plain data.
The pixel grid gains the two rules a sheet needs, beside the rectangle's own grid:
- `PixelGrid::sheet`: the whole sheet's grid, anchored at its top-left corner, as an image of
the sheet is drawn.
- `PixelGrid::window`: the columns and rows a rectangle meets; a side on a pixel edge takes no
sliver beyond it. A picture drawn into its window of the sheet grid is placed by copying whole
pixels.
`Picture::grid` is a picture's own grid at a dpi, for SVG and PDF to embed. `Scene::validate`
counts a picture as one record. It refuses a rectangle outside the coordinate bound or without
area, and an opacity that isn't above 0 and at most 1. `Aabb2` is read and written as
`{min, max}`.
On the walk (C4), which S3 follows here: `GridItem::Picture` passes a picture through with its rectangle in
millimetres, since the pixel grid places its pixels, and the SVG and PNG writers refuse it ("not supported yet:
pictures (A9)") until their own slices. `GridItem`, `GridGroup` and `OnGrid` are `PartialEq` only, as a
picture holds numbers that aren't `Eq`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures in a sheet PNG (#5624, W17b S5)
The sheet PNG writer draws the scene's pictures (S3's Item::Picture) where
the scene orders them, between its lines and fills, from a Pictures provider.
- The PNG is now the sheet's pixel grid (PixelGrid::sheet, S1): anchored at
the sheet's top-left corner and rounded outward, so nothing is clipped.
210 mm at 300 dpi is 2481 px (it was 2480, rounded to the nearest). A side
over 65,536 px is refused and the refusal names the limit ("a sheet PNG
side of ... px at ... dpi is over the limit of 65536 px"); an A0 sheet
fits up to about 1400 dpi.
- A picture fills exactly its window of that grid, so it registers with the
lines drawn over the same rectangle. Each band asks the provider for just
its own rows, as straight-alpha sRGB RGBA, and the bytes are checked: too
few or too many, or the provider's error, refuse the PNG with the picture's
source named. paper::NoPictures refuses every picture.
- Pictures are asked for at most MAX_PICTURE_DPI (1200): above it, on the
grid k = ceil(dpi / 1200) times coarser, whose pixels each fill exactly
k x k of the sheet's (both grids share the top-left anchor), so a 2400 dpi
export doesn't ask a renderer for four times the pixels.
- Source-over in sRGB, the picture's alpha times its opacity; transparent
paper keeps the alpha. In black and white each picture pixel is dithered
with an 8 x 8 ordered (Bayer) matrix at its place on the sheet, so bands
don't show; lines stay solid. PngReport says whether anything was
dithered.
- In the writer a picture is one more shape a band draws, beside A4's
outlines, fills and hairlines; the walk's picture arm passes pictures
through, and the SVG writer still refuses them (A9).
Tests: a picture's exact window and its register with a fill over the same
rectangle, also on a sheet 100.8 px high (the grid anchored at its top);
pictures keep their place in the paint order; opacity scales the alpha (on
white and transparent paper, and the picture's own half alpha); above 1200
dpi a coarser picture's pixels are each copied 2 x 2; black and white
dithers half of mid grey and keeps a line over it solid, whatever the band;
a provider's short rows, its error and no provider are refused, and a
picture off the sheet asks for nothing; the bands test draws three pictures
1, 3 or 7 rows at a time, the same bytes and each picture row asked for
once; the sheet sizes on the outward grid and the 65,536 px refusal; the PNG
fuzz with a picture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures in a sheet SVG (#5624, W17b S5)
A picture is an <image> holding a PNG as a data URI, on the picture's own
pixel grid (Picture::grid) at the picture resolution the caller gives,
25 to 1200 dpi: paper_svg(scene, pictures, picture_dpi), the same shape as
paper_png. Only its window over the sheet is embedded and asked for, so it
never costs more pixels than the sheet holds; one off the sheet is left out.
Its x, y, width and height are the grid's own pixel edges put on the
nanometre grid every line is on, so a line on its edge has its number.
Opacity below 1 is written, in millionths as lengths are.
The PNG writer gives the embed its encoder settings (sRGB, the dpi
recorded) and its provider check, now one function each, and streams the
picture a band of rows at a time, refused once it passes the room left
under the file's 64 MiB.
Tests: the 1182 x 591 px grid at 300 dpi and its edges, a line on the
edge, paint order and opacity, the crop and the picture off the sheet, the
bands, and each refusal; the SVG fuzz case gains a picture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: one walk onto a writer's number grid, for every writer (#4890, C4)
The SVG writer kept its own number grid: each coordinate whole nanometres, every joint written once,
a closed path ending exactly on its first point, slivers merged into the next piece and a path's
last piece kept. PDF, PNG and the Drawing workspace's canvas need the same rules, so they move into
`geom::paper::grid`, and the SVG writer only formats what the walk gives it.
- `Grid`: `per_mm` steps a millimetre. `Grid::NANOMETRE` (six decimals of a millimetre) is SVG's.
`Grid::new` takes 1 to 1e9; a power of two keeps every number exact as a binary float, which a
writer of 32-bit numbers such as PDF can use.
- `Prepared::on_grid(grid) -> OnGrid`: each group's items as paths of `Piece`s (lines, arcs of at
most a quarter turn, cubics, parabolas), y up as in the scene, a closed path's closing line left
to the writer's close, and a report of widths snapped and pieces merged. Slivers are measured in
the grid's own steps, so a coarser grid merges more.
- The SVG writer flips y on the whole numbers it's given and writes the same bytes as before.
`SvgReport` is the grid's report.
- Ellipses, hyperbolas and Béziers above degree 3 are still refused (A3b), now by the walk.
DXF stays on its own number rule for now: it writes exact entities (ELLIPSE, SPLINE) and is being
reworked under #5318 to #5321; whether its polylines take a grid is decided there.
Tests: every SVG test unchanged, bytes included; the grid's rounding and its bounds; the A3 border
on the grid (y up, closing line left out, fill loops closed); slivers in the grid's own steps, with
the merge boundary both ways (10 and 11 steps, a 6-8 and a 7-8 step); an arc's quarters with their
radius and turn in steps; a width under half a step made one step; an ellipse refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: a sheet PNG at a chosen dpi and colour (#4890 A4)
A new writer, io::paper::paper_png, that reads the shared walk on the
nanometre grid, the one the SVG writer uses, so a PNG draws the same joints,
closures and merges. Neither the walk nor the SVG writer changes.
- Curves are flattened within 1/8 px by geom::paper::flatten, which turns
each walked piece back into its Seg2 (an arc's centre from its ends, radius
and direction) and takes Seg2::chords' steps. chords is the bound
Seg2::polyline already used (the chord's bulge for arcs, Wang's bound for
the rest), moved out of polyline unchanged so both read one rule.
polyline itself doesn't fit: it floors an arc's tolerance at a millionth of
its radius and caps a piece at 4096 steps, coarser than asked without a
word (0.1 mm, 9 px, on a 100 m arc at 2400 dpi). Over 2^20 points a path,
or 2^24 a sheet, is refused instead. tiny-skia only gets lines: its own
flattening stops at 64 lines a curve, more than a pixel off on a large arc
at a high dpi.
- 25 to 2400 dpi (300 by default). 8-bit greyscale (the default), 1-bit
black and white (no anti-aliasing, every line at least a pixel wide), 24-bit
colour, or 32-bit colour with transparent paper.
- The file records its dpi (pHYs) and sRGB, so it prints at the sheet's size.
- Each line is stroked once, then the sheet is drawn in bands of 16 MiB of
pixels streamed into the file, so memory doesn't grow with the sheet. Each
band also draws a row above and below that isn't written: tiny-skia starts
an edge a little differently where a clip cuts it (one subsample, 16
levels, in a few pixels), so no written row sits on a cut and the bytes are
the same whatever the band.
- A line under a pixel wide (in greyscale and colour) is drawn as tiny-skia's
hairline, its coverage scaled by its width: its stroked outline would fall
between the rows the rasteriser samples and vanish.
Tests: the pixel size and pHYs of A4 at 300 and 25 dpi; a line's and a fill's
pixels at 254 dpi (butt ends, the fill's hole); each colour's PNG type, ink
and paper; a hairline between two rows' centres that is light grey in
greyscale and stays one pixel in black and white, and a bar a fifth of a pixel
wide that black and white inks by its centre; a closed outline joined at its
start; a 40 mm circle round to the pixel at 600 dpi; the same bytes drawn 1, 3
or 7 rows at a time or all at once, and again; the refusals; the flattener's
bounds and counts, and its point cap at the exact boundary; the scene-JSON
fuzz through the PNG writer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Geom: the pixel grid of a paper rectangle (#5624, W17b S1)
One rule for where a picture's pixels lie on paper, shared by the picture renderer and the writers
that place it: anchored at the rectangle's lower-left corner, rounded outward (W = ceil(w / p - 1e-9)
with p = 25.4 / dpi), so the overhang is at the top and the right; rows run top-down. At most
65,536 px a side; nothing caps the total, as pictures are drawn in tiles and strips.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures, and a sheet's pixel grid and windows (#5624, W17b S3; #4890 A9)
A picture on a sheet is `Item::Picture`: the rectangle it sits in, the name of its pixels
(`source`, opaque as a group's object id is) and its opacity. The pixels stay out of the scene: a
writer asks a `Pictures` provider for them on the grid it draws on. A PNG at 1200 dpi then gets a
shaded view drawn at 1200 dpi, not one stretched, and a scene stays small, plain data.
The pixel grid gains the two rules a sheet needs, beside the rectangle's own grid:
- `PixelGrid::sheet`: the whole sheet's grid, anchored at its top-left corner, as an image of
the sheet is drawn.
- `PixelGrid::window`: the columns and rows a rectangle meets; a side on a pixel edge takes no
sliver beyond it. A picture drawn into its window of the sheet grid is placed by copying whole
pixels.
`Picture::grid` is a picture's own grid at a dpi, for SVG and PDF to embed. `Scene::validate`
counts a picture as one record. It refuses a rectangle outside the coordinate bound or without
area, and an opacity that isn't above 0 and at most 1. `Aabb2` is read and written as
`{min, max}`.
On the walk (C4), which S3 follows here: `GridItem::Picture` passes a picture through with its rectangle in
millimetres, since the pixel grid places its pixels, and the SVG and PNG writers refuse it ("not supported yet:
pictures (A9)") until their own slices. `GridItem`, `GridGroup` and `OnGrid` are `PartialEq` only, as a
picture holds numbers that aren't `Eq`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures in a sheet PNG (#5624, W17b S5)
The sheet PNG writer draws the scene's pictures (S3's Item::Picture) where
the scene orders them, between its lines and fills, from a Pictures provider.
- The PNG is now the sheet's pixel grid (PixelGrid::sheet, S1): anchored at
the sheet's top-left corner and rounded outward, so nothing is clipped.
210 mm at 300 dpi is 2481 px (it was 2480, rounded to the nearest). A side
over 65,536 px is refused and the refusal names the limit ("a sheet PNG
side of ... px at ... dpi is over the limit of 65536 px"); an A0 sheet
fits up to about 1400 dpi.
- A picture fills exactly its window of that grid, so it registers with the
lines drawn over the same rectangle. Each band asks the provider for just
its own rows, as straight-alpha sRGB RGBA, and the bytes are checked: too
few or too many, or the provider's error, refuse the PNG with the picture's
source named. paper::NoPictures refuses every picture.
- Pictures are asked for at most MAX_PICTURE_DPI (1200): above it, on the
grid k = ceil(dpi / 1200) times coarser, whose pixels each fill exactly
k x k of the sheet's (both grids share the top-left anchor), so a 2400 dpi
export doesn't ask a renderer for four times the pixels.
- Source-over in sRGB, the picture's alpha times its opacity; transparent
paper keeps the alpha. In black and white each picture pixel is dithered
with an 8 x 8 ordered (Bayer) matrix at its place on the sheet, so bands
don't show; lines stay solid. PngReport says whether anything was
dithered.
- In the writer a picture is one more shape a band draws, beside A4's
outlines, fills and hairlines; the walk's picture arm passes pictures
through, and the SVG writer still refuses them (A9).
Tests: a picture's exact window and its register with a fill over the same
rectangle, also on a sheet 100.8 px high (the grid anchored at its top);
pictures keep their place in the paint order; opacity scales the alpha (on
white and transparent paper, and the picture's own half alpha); above 1200
dpi a coarser picture's pixels are each copied 2 x 2; black and white
dithers half of mid grey and keeps a line over it solid, whatever the band;
a provider's short rows, its error and no provider are refused, and a
picture off the sheet asks for nothing; the bands test draws three pictures
1, 3 or 7 rows at a time, the same bytes and each picture row asked for
once; the sheet sizes on the outward grid and the 65,536 px refusal; the PNG
fuzz with a picture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: pictures in a sheet SVG (#5624, W17b S5)
A picture is an <image> holding a PNG as a data URI, on the picture's own
pixel grid (Picture::grid) at the picture resolution the caller gives,
25 to 1200 dpi: paper_svg(scene, pictures, picture_dpi), the same shape as
paper_png. Only its window over the sheet is embedded and asked for, so it
never costs more pixels than the sheet holds; one off the sheet is left out.
Its x, y, width and height are the grid's own pixel edges put on the
nanometre grid every line is on, so a line on its edge has its number.
Opacity below 1 is written, in millionths as lengths are.
The PNG writer gives the embed its encoder settings (sRGB, the dpi
recorded) and its provider check, now one function each, and streams the
picture a band of rows at a time, refused once it passes the room left
under the file's 64 MiB.
Tests: the 1182 x 591 px grid at 300 dpi and its edges, a line on the
edge, paint order and opacity, the crop and the picture off the sheet, the
bands, and each refusal; the SVG fuzz case gains a picture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: shaded snapshots and their pictures' parts (#5624, W17b S4)
drawing.view.snapshot takes `shaded` as a display or reference style and,
when a picture is drawn, says which: picture {pixels, dpi, rect_mm}, the
boundary's pixel grid at the sheet's dpi or 1200, the lower, since lines
may export finer. It renders nothing. A shaded part's own lines are left
out of the reply, as its picture draws it; it still hides what lies behind
it. shaded_visible and shaded_visible_hidden stay refused until the view's
exact lines (W06), and shaded with `scene` (and on a sheet) until the
paper scene draws pictures.
- engine::drawing_picture: the pictures a view draws, bottom first, and how
each body takes part in each (painted, depth only, left out). The model
always hides reference parts behind it; reference parts hide the model
only when reference_hides_model is on; shaded reference parts that don't
get a picture of their own under the model's, so they never cover it.
- product_scene::extract_where: the scene for the bodies a caller picks;
extract keeps the browser's eye, a drawing draws every body.
Tests: every style and hide case, reference parts through a subassembly
and a part, the picture's size at 300, 1200 and 2400 dpi, a view with
nothing shaded, the hidden body in the filtered scene, and which lines a
shaded model or shaded reference parts leave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf51e62f7 jyviko: Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
- cde8be4a1 jyviko: Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
- 155f1f470 jyviko: Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
- 21f00a917 jyviko: Kernel rig: every fillet and chamfer case rounds its tangent chain
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e8caa1e91 jyviko: Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
- 60393a718 jyviko: Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
- 6ba069d06 jyviko: Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
- e24eb7789 jyviko: SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 02de15f90 brett19: Move the solidcore pin to 9fb13f145
- 09b646005 brett19: Turn on solidcore's new fixes at 9fb13f145
- c494a18f9 brett19: Rig: the reimported peg's rounds fail as the peg's do
- e9ac0e606 brett19: solidcore: a curvature fillet is refused until solidcore has the equal-area Gⁿ section
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
`Item::Text` is a run of placed glyphs in one font, with its logical text and the clusters that
tie the two together, and `Scene.fonts` the table of the fonts the runs use (as posted on #4890,
with each glyph's `hmtx` advance). `Scene::validate` holds them to the posted rules. Writers never
parse a font.
- A run names its font by the font's id (a hash of its face's bytes and index), so groups laid
out apart name a font alike whichever machine's font it is; `Scene::add_fonts` joins their
tables at assembly, kept in order of id, so the same input gives the same bytes.
- A font's bytes never go through serde: a scene read from JSON is refused until they come from
the font of the id it names.
- `TextRun::outlines` places the glyph outlines on the sheet, for the writers to fill nonzero.
The SVG writer refuses text by name until B2. `Scene::new` builds a scene without text, so the
next field doesn't touch every caller again.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: text runs and their fonts, as records with their rules (#4890 B1a)
`Item::Text` is a run of placed glyphs in one font, with its logical text and the clusters that
tie the two together, and `Scene.fonts` the table of the fonts the runs use (as posted on #4890,
with each glyph's `hmtx` advance). `Scene::validate` holds them to the posted rules. Writers never
parse a font.
- A run names its font by the font's id (a hash of its face's bytes and index), so groups laid
out apart name a font alike whichever machine's font it is; `Scene::add_fonts` joins their
tables at assembly, kept in order of id, so the same input gives the same bytes.
- A font's bytes never go through serde: a scene read from JSON is refused until they come from
the font of the id it names.
- `TextRun::outlines` places the glyph outlines on the sheet, for the writers to fill nonzero.
The SVG writer refuses text by name until B2. `Scene::new` builds a scene without text, so the
next field doesn't touch every caller again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper text: a text laid out by sketch's rule, as the scene's runs and their drawing font (#4890 B1b)
`paper_text` lays a text out with `TextMetrics`, the rule sketch text draws and measures with, and
returns the paper scene's runs of placed glyphs (B1a) with the font they are set in, holding the
glyphs they place: each one's `hmtx` advance and its outline in font units.
- Drawings are set in bundled fonts only (`DRAWING_FONTS`: Liberation Sans for now). A font is
admitted once: a static face with a PostScript name, a cap height and a `post` table, its stem
width measured across its `l`, and its id hashed then. A run names its font by that id.
- A character the font has no glyph for is refused by name; bold is refused; an italic leans as
sketch text's made-up italic does; text on paper follows no path.
- Lines break a pitch apart and align as sketch text's do. A line with right-to-left characters
is a run per direction, shaped, with clusters from the shaper; any other is one run, a
character to a glyph.
`TextMetrics` keeps one layout: it now reports each glyph's cluster and the line's runs, and the
glyph outline walk gives loops of `Seg2`, which sketch text turns into the geometry it drew before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paper text: the fonts a text uses, each once (#4890 F0)
`paper_text` returns its runs with the list of fonts they use, each once in order of id (so the
same text gives the same list) and each holding exactly the glyphs its runs place, where it
returned one font. Still one drawing font today; the list is the shape a text set in several
fonts (a Latin, Arabic or CJK line) needs, and `Scene::add_fonts` already takes it as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Reference parts in a drawing view's lines (V5a, #5866)
A body placed through an occurrence that counts as reference is a reference
part: one rule, Document::reference_occurrences. Its lines say so in replies.
With reference_hides_model off (the default) the model's lines skip reference
parts at the one occlusion test, and reference lines test against everything.
The two roles merge apart, so a reference line never takes a model line's
place on one stretch. Extents come from the model parts when there are any. A
sketch curve is the model's: a reference part hides it only as it hides the model.
One thing the plan didn't name: reference lines stop at the view's boundary
(extents and reference margin) when model parts are there too, which is what
the margin is for; a part much bigger than the model would otherwise run off
the sheet.
Hidden reference lines in a scene are refused until dashed lines (V7b), as the
model's are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference parts on paper: thin, under the model's lines (V5b, #5866)
Saved views and the snapshot's scene alike, 0.25 mm until the drawing styles
slice sets widths by kind of line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference parts: tests the planted faults asked for (#5866 V5)
A reference line against a model line on one stretch, and against another reference part; one part
placed through a reference assembly and on its own; a dimension on a reference part's edge; undoing
and redoing a change of type, set on the occurrence or its component; and a saved view's setting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A test reads any other paper item as no stroke (#5866 V5)
Naming Fill alone would stop compiling when #7590 adds a kind of item, with
no conflict for git to show.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- a1b4119c3 brett19: Turn on geometric_g2_continuity: 2992's slowdown is gone
- f2ce343a0 brett19: Known failures after the new fixes: four tests and a rig case pass
- b57c24f7f brett19: Known-failing tests: the tabbed plate cites solidcore#2223
- 0aff35705 brett19: Merge fix: solidcore reads planar sheets without SMLib, so their edge reader is always built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- fb851d9c2 brett19: Known-failing tests: main's four tests that fail on solidcore as on C++
- 6de10a7fb brett19: Model cache test: say why it reaches the C++ kernel
- 84bca5969 brett19: Move the solidcore pin to c931c9641
- e1b76bdfc brett19: Turn on solidcore's new fixes at c931c9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 15c5cd5d5 brett19: Known-failing tests: cite the solidcore issues now filed
- 462738b6a brett19: Known failing after the smlib merge: the r5 test-peg corner on solidcore, main's C++ test lines
- 4a98a1f8a brett19: Model cache: a saved model is its kernel's
- 9c2388ef8 brett19: Geometry kernel strings in Vietnamese, now a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01e2e939e jyviko: Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
- 7bba3092c jyviko: Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
- 0b1cc8a8c jyviko: Kernel tests: a spline radius whose balls fold over one another at its peak is refused
- 1745e5c38 jyviko: Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- afb55d806 brett19: One kernel flag: solidcore, the default, or smlib; routed is gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 3908128a8 brett19: Known-failing tests: refreshed from the default run at solidcore de85a3e00
- cd94f78f3 brett19: Rig: --route is gone; a run has one kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cf5e0e3c1 jyviko: Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7577e032f jyviko: Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 922ee28f3 jyviko: Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
- 19455396b jyviko: Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
- 4df3adc5a jyviko: Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
- 539d12648 jyviko: Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aa41c0b5d jyviko: Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
- 05f5e8601 jyviko: Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
- 9d4f78001 jyviko: SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 75229f2b9 brett19: Offset tests: a sphere moved to its centre leaves nothing again (solidcore#2092 fixed by #2096)
- 6221b7f4b brett19: Rig: solidcore known-failing lists at pin de85a3e00
- b04e363e7 brett19: Rig: #316's renamed shell cases pass on solidcore, off its known-failing list
- c786db6bf brett19: A blend's pick measures close edges on their curves, not their polylines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 197cd4f43 brett19: Booleans: the copies no longer take an index
- 0f843c295 brett19: Pin solidcore at main de85a3e00 (#2080, #2081, #2086, #2095, #2096, #2097, #2102, #2103)
- 0b48548af brett19: Turn on solidcore's new fixes and take the rational-span flag off HELD_BACK
- d0c95f0dc brett19: Chamfer: second offsets through SetFilletParameters (solidcore#2095)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 1bf9c8665 brett19: HELD_BACK: geometric_g2_continuity is a fourfold slowdown on 2992, not a hang
- 126a281bb brett19: Pin solidcore at main c093bc5a3 (#2054, #2060, #2061, #2065, #2066, #2068, #2069, #2072, #2076)
- 5d59d42d8 brett19: Turn on gap_samples_non_bspline_v_stride, gap_array_append_updates_longest, imprint_skips_collapsed_definition
- 1c90e60aa brett19: Working copies by solidcore's brep_copy, not our own key domains (#2047 fixed by #2055)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 32b26888c brett19: Turn on offset_keep_cavity_regions and offset_four_face_vertex_split
- 38849d7b0 brett19: Hold geometric_g2_continuity: with the rational-span flag off, 2992 and 3368 don't end
- 5d7dca1a9 brett19: Offset tests: both kernels refuse a top moved -9; the sphere to its centre waits on solidcore
- da4db59a3 brett19: HELD_BACK: geometric_g2_continuity's reason is 2992 alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 19014f38a jyviko: Kernel rig: constant rounds of the exact classes, and a tee's round
- 73416a9bf jyviko: Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
- 60923d8cc jyviko: SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 2b1a63d3f brett19: Pin solidcore at main 2898e1197 (#2053)
- 9337aff4c brett19: Every solidcore fix on unless it appears broken (brett19's rule)
- 2cd566aae brett19: Hold bspline_trim_keeps_rational_end_spans: it fails 3078's check
- 9df34988c brett19: Pin solidcore at main bb6b65706 (#2049, #2051, #2055)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- eff6416d4 brett19: Pin solidcore at main f75e9d2e8 (#2023, #2024, #2034-#2040, #2043-#2045)
- 15e3a61da brett19: Pin 8: decide the new solidcore flags against the fork at 26cc451
- 6a0166853 brett19: A round mitred to one that overflows goes first with it (fork 9ba2b12); flags() and warnings
- d4eb66f25 brett19: Turn on offset_splits_corner_vertices (fork 2e1bb8c's behaviour)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 8ad306e69 brett19: boolean2d through boolean_2d, typed edge-vanishes, typed put-back refusal
- b6285e525 brett19: Overflowing rounds go first again (solidcore#1980)
- 2647b12e5 brett19: Hold back fillet_refuse_crossing_rails: not in the fork
- 0b627d637 brett19: Restore all_solid's loop: an unused index slipped in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a3165f62d jyviko: Rig: fillet corners graded curvature-continuous, the default to be
- be0b1b39b jyviko: Rig: the test-peg's front chamfer builds
- 6cd4003ad jyviko: Rig: the curvature-continuous corner cases pick the curvature fillet
- 4401ffb1f jyviko: Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 83487c4d9 brett19: Pin solidcore at main 9f2c980b3 (#2004, #2005, #2006, #2008)
- aca0b57ee brett19: Turn on plane_recognition_origin_after_axes
- 5c0279153 brett19: Pin solidcore at main c369f8801 (#1977, #1996, #2000, #2016, #2017, #2018, #2027 and more)
- 14b1d1956 brett19: Pin 7: decide the new solidcore flags against the fork
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- ec3a21778 Brett Lawson: smlib: a blend on solidcore has a history, as on the C++ kernel
- 03470c3df brett19: Pin solidcore at main 9dde25e97 (#1988, #1997, #1985, #1940, #1974, #1975, #1976)
- f01b87757 brett19: Audit the held flags against the fork's source; tabbed plate and mitred rounds parity
- 9b73dfe74 brett19: Offsets go through solidcore's simple calls; ignored tests cite solidcore issues
Co-authored-by: Brett Lawson <brett@Ubuntu-resolute-latest-amd64-base.zst>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A drawing's fixed unit may be any length unit of the expression unit
table (expr::UNITS: um, inch, yd, mil and the rest besides a design's
five), but the display functions knew only the five and showed the
others' measurements as millimetres. unit_scale now reads the same
table, so the two can't drift apart again; the five keep exactly the
scales they had (1 over 10, 1000, 25.4 and 304.8). The inch rule (a
fourth digit when it means something) follows an inch's size, so
`inch` reads as `in` does.
A design's own units are only the five, so nothing it shows changes.
The test that pinned `inch` to millimetres becomes one that checks
every length unit of the table shows its own numbers; angle names
(`deg`, `rad`) and other text keep the millimetre fallback.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: a hole's or an arc's centre as a point to measure from (#4896, W20c)
A linear dimension's point can be the centre of a circle or an arc, saved as its one edge's name
with `centre`. It is found again as construction geometry finds a round edge's centre
(`construct::as_circle`), in 3D, so any view can measure it; a split edge is ambiguous, and an edge
that is no longer round can't be measured. `drawing.dimension.add` takes `{centre: edge}` wherever
a corner goes, and refuses a straight edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: a chain of distances along one line (#4896, W20c)
A chain dimension runs through 3 to 64 points in order (corners or hole centres) and reads the
distance from each to the next along one line as the view shows it: horizontal, vertical, along a
direction, or aligned from the first point to the last. The line runs the way the first point to
the last goes, and a point out of order is refused, never moved, so the members add up to the
overall from the first point to the last (`drawing_measure::chain`). It reads projected only (true
lengths of points off one line don't add up) and shows its members' numbers, never a text instead.
`drawing.dimension.add` takes `{chain: {points, direction?}}` and counts the points before looking
any up; `drawing.dimension.edit` changes its direction; inspect lists its members, its value being
the overall.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: a whole cylinder's diameter between its silhouettes (#4896, W20b)
A cylinder dimension saves a face by name (ModelFace, as ModelEdge names an edge) and reads Ø
between the cylinder's two silhouettes, which any view but one along its axis shows 2r apart
(`drawing_measure::silhouette_side`). The face, or the pieces it was cut into, must lie on one
cylinder (the kernel's own condition for faces on a common cylinder); every face of the body on
it counts, since the kernel builds a whole cylinder as two half faces; and both silhouettes must
lie on those faces, so a fillet's quarter round is refused. `Document::face_reference` picks a
face by a point on it or by its index; `drawing.dimension.add` takes `{cylinder: {face}}`, edit
refuses its settings, and inspect can list face candidates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: between two cylinders' silhouettes (#4896, W20b)
A dimension between a silhouette of one cylinder and a silhouette of another, as the view shows
them. Each is named by a face of its cylinder and by its side: the one nearer the other cylinder
on the view, or the one farther (SilhouetteSide). So it keeps to them whichever way round the
view shows the cylinders.
- geom: drawing_measure::between_silhouettes takes the two cylinders (Cylinder, now geom's: the
type doc kept privately), their sides and a direction as a linear dimension takes it (aligned:
square to the silhouettes). The silhouettes must be parallel on the view and the axes apart
there. Foreshortened when the axes aren't parallel in the model, or the silhouettes lie at
different depths.
- doc: DimensionKind::Silhouettes { a, b: Silhouette { face, side }, direction }, read as the
view shows it. Each silhouette must lie on its cylinder's faces (Lookup::on_cylinder, now shared
with the cylinder kind). Document::silhouettes_kind makes two silhouettes of one cylinder of
one body that cylinder's diameter (which takes no direction), else the distance between them.
- engine: drawing.dimension.add takes {silhouettes: {a, b: {face, side}, direction?}};
drawing.dimension.edit changes its direction only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 88e00486b jyviko: STEP import: a face bounded by a slit alone is the whole of its closed surface
- 3c16884f7 jyviko: Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57edcf61a jyviko: Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
- a250062c2 jyviko: Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
- b0d1ba345 jyviko: Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
- 77f127c61 jyviko: STEP import: a face bounded by seams alone runs its loop the other way, never turns over
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 889a2f866 jyviko: Kernel rig: the cut mirrored loft graded on the box its sections pin
- 37a4c5647 jyviko: Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
- 6c2a2f395 jyviko: Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
- cd56cd3ad jyviko: Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6847c97c jyviko: Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
- bfdb79418 jyviko: Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
- 130f2adaf jyviko: Kernel rig: the two G0 window patches graded on the box the part they close keeps
- 8e0f6403c jyviko: Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49c7b982e jyviko: Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
- 0bcc24ccd jyviko: Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
- 27b7e202a jyviko: Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
- 9b4162a33 jyviko: Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f2aba03f8 jyviko: Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
- 764719c53 jyviko: Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
- 4b512f69e jyviko: Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
- 63dd6ae6f jyviko: Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a53f1640e jyviko: Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
- be8e728cd jyviko: Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
- edb558bd1 jyviko: Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
- fd9d159f4 jyviko: Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c740e4de1 jyviko: Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
- ba75de350 jyviko: Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
- bdb321cdb jyviko: Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
- 1893a5016 jyviko: Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d54d3195f jyviko: Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
- c0c961326 jyviko: Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
- d77aac416 jyviko: Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
- e30459e52 jyviko: Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7fdbd5ab6 jyviko: Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
- 18c8add3f jyviko: Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
- 5fb3cfa8a jyviko: Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
- 34e404d38 jyviko: Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3c8c36ec jyviko: Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
- 9aa2651b1 jyviko: Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
- 391fc51b4 jyviko: Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
- 166d574cc jyviko: Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e348ae2a jyviko: Tests: rustfmt the board fixture example and the coplanar asserts
- 033d1a122 jyviko: Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
- 780a0652d jyviko: Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43551498d jyviko: STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
- 6704d3094 jyviko: Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
- 94acc0c43 jyviko: Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
- 88c7cb6a8 jyviko: Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f81c4b157 jyviko: Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
- 9c0d6bd1f jyviko: Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
- 648413556 jyviko: Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
- 35805f899 jyviko: Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 16bef1097 jyviko: Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
- 699ddb6b3 jyviko: SMLib history test: every operand's order is the identity on its record's faces and edges
- ec421252d jyviko: Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
- f87f22874 jyviko: Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94e67d4ca jyviko: Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
- 4c7d4f5c0 jyviko: Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
- 0d94d5f77 jyviko: Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
- c44cbe9ac jyviko: Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d7bbf09e0 jyviko: Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
- 0e51ffbff jyviko: Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
- e03c72a3e jyviko: Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
- 321e56724 jyviko: Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fe9df533 jyviko: Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
- 8ec40d25e jyviko: Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
- 697ea2ca8 jyviko: Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
- e60cde8dc jyviko: Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 25692b119 jyviko: Kernel rig: the ring cut frame and the up-down join shell
- 18f08bf83 jyviko: Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
- 78b765e83 jyviko: Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
- f7d4e5344 jyviko: SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 469a3b2f9 jyviko: Naming: a blend's seams split its edge's name at the | between its two faces
- 1d818a2d1 jyviko: Fillet rig: five refused blends build, off the known-failing list
- 8550ac7e4 jyviko: Kernel rig: the trough and the pocket whose floors fall to a drain build
- 5f826a1a6 jyviko: Kernel rig: the plate with a hole through its arc side shells open at its far end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b16e8a542 jyviko: Sketch: a control spline can carry its own knots and weights
- e6abea809 jyviko: Sketch projection: a free-form edge comes in as the one exact spline it is
- f61f25c7f jyviko: Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
- 09bc14dbd jyviko: Naming: test that a round of a round's end has no seam with that round's faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Recovery: a change to a drawing alone is autosaved and recovered (#3890, K9')
A design's drawings are part of its document (K3b), so the autosave already sees a drawing's
change as unsaved work and writes it with the design, and recovery reads it back. This test
holds that: with the model saved, a change to a drawing's properties alone is autosaved, and the
recovered design has the drawing as changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recovery: a drawing that breaks a rule is left out of the autosave and the crash copy, named (#3890)
Reading a design refuses it whole for one drawing that breaks a rule of the record, so an autosave
or a crash report's design holding one never opened again: all the unsaved work was lost. Both
copies now keep the rest of the design (drawing::openable) and name each drawing left out and the
rule: the autosave as its error, the crash report in its notes. A design's save error names the
drawing it couldn't save too (Drawing::label).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recovery: a copy that must open keeps a design's drawing rules too (#3890)
drawing::openable now leaves out what a read refuses at the design's level as well: the later of
two drawings with one id, and the drawings past MAX_DRAWINGS, each named with its rule. So an
autosave never keeps a stale copy over a drawing problem. The id rule is take_id, which
check_in_design uses too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recovery: a drawing too large to save is left out too, and the status line names it (#3890)
The autosave and the crash copy already leave out a drawing that breaks a rule of the record.
A drawing too large to save failed the whole autosave instead; `openable` now leaves it out the
same way, before its id, so the rest of the design is kept. Nothing is skipped silently: the
autosave's error names each drawing left out, and the status line shows it.
Tests: a drawing left out takes no id from a later one; an autosave leaves out one too large to
save; an autosave keeps what is hidden; the status line names a drawing the autosave left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dd8867414 jyviko: kernel: Extend grows a surface of several faces face by face
- 48a757827 jyviko: kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
- 3421a8ef0 jyviko: Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
- 20d5d8b13 jyviko: kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5bb43bdb1 jyviko: CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
- d23c37027 jyviko: Tests: the known-failing list takes develop's 10 failing tests
- e18fb40d8 jyviko: Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
- 9b58a5170 jyviko: Sweep path: a curve of several pieces is turned round whole
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c19500fce jyviko: Fillet: the radius-too-large choice in plain nouns
- b75d17667 jyviko: kernel: a round that would cut through its wall into a hollow is refused
- 795394417 jyviko: Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
- a26d3ee41 jyviko: xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 62fe29dbd jyviko: Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
- 571d711c8 jyviko: kernel: the re-blend's removed picks formatted as rustfmt lays them out
- 2fab94991 jyviko: kernel: blend_smlib laid out by the 2024 edition's rustfmt
- 38fd4a4f6 jyviko: Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- b0568524b Brett Lawson: smlib: solidcore's four new fork-carried opt-ins are on; the trimmed face tight box waits
- a2d5971be Brett Lawson: smlib: the quarter-cylinder sheet offset and the half-disc extrude match the C++ kernel on solidcore
- 509209838 Brett Lawson: solidcore: move the pin to afcee131a (main, with solidcore#1594, #1674, #1595)
- c9fcf82a5 Brett Lawson: smlib: solidcore's four new fork-carried opt-ins are on; the fillet trim status waits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Dimension::last_good saves the value the session last read, written only when
there is one, and a save takes it from the session's reads as it takes what is
hidden: no read touches the document, makes an undo step or asks to be saved.
drawing.dimension.inspect answers this session's read first, else the file's.
resolve_dimensions never sees it, so a lost dimension stays lost. A value past
the drawing format's limit is left out of the save, not written into a file that
then can't open.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
An edge given as a point looked along the edge's mesh lines, within a point's tolerance, so a point on a
circle or an arc that fell between two chords found no edge: a radial dimension on most points of a rim
said "no edge at". A point off every chord now takes the edge whose chords are within what its body was
meshed to, and only when no edge passes through the point itself, so a point on a straight edge beside
a curve is still that edge.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cdff4ac7c jyviko: engine tests: probes ask for the exact point class
- 7ca072ec6 jyviko: ui, cli tests: probes ask for the exact point class
- a85d22e60 jyviko: kernel: Body::contains, the mesh test, is gone
- baf51b271 jyviko: kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 9a901d136 Brett Lawson: smlib: tag history on solidcore is one application Tag per object, with the capi's handlers
- fecd4bee3 Brett Lawson: smlib: an extruded profile's arcs on one circle sweep one wall face on solidcore
- 5f7a21157 Brett Lawson: smlib: the half-disc extrude's C++ comparison cites solidcore#1477
- f64857f95 Brett Lawson: solidcore: move the pin to 15e72dff9 (main, with solidcore#1752, #1495, #1796)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 63864b298 Brett Lawson: smlib: solidcore's five new fork-carried opt-ins are on; the trim end-span opt-in waits
- 494a08de1 Brett Lawson: smlib: history on solidcore: a face whose edge is only cut by a vertex is Kept (fork 1c7accd)
- ccfa37a9b Brett Lawson: solidcore: move the pin to bba8d8798 (main, with solidcore#1747 application attribute handlers)
- 8d47118ff Brett Lawson: smlib: solidcore's three new fork-carried opt-ins are on; the blend-curve revolve opt-in waits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Dimension layout: sizes for paper, and text above the line (#4896, W19c)
A dimension's sizes become a parameter, so a drawing can lay its
dimensions out in paper millimetres with the same code as a sketch:
DimSizes { arrow, gap, overshoot, offset, above } and
dim_layout_sized. dim_layout and dim_layout_reaching keep their
signatures and use DimSizes::screen(px), today's 9, 3, 4 and 22 px;
the other default text places stay the same fractions of the offset
(18, 48 and 20 to 22), and default_text takes its 22 from the same
place. A size that isn't a finite number above 0 (or is beyond MAX_COORD,
the largest length a sketch takes) falls back to its 1 px value, as a
bad px does today.
`above` puts a linear dimension's text above an unbroken dimension
line (ISO 129-1), running along the line and reading from the bottom
or the right; DimLayout::text_dir gives its direction (level for text
in the line). The arrows go inside or out by the same test, with the
text's length along the line; a leader to text outside runs on under
it.
On main, #7056 moved the four default places into
default_text_offset(frame, px). This leaves those lines as they are,
so when main next comes into drawings the layout's arms call it with
this px (the offset's 22nd), and lib.rs's export line takes both lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format the dimension layout's re-exports (#4896, W19c)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 20c0c2ffc jyviko: Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
- 56d39a576 jyviko: smlib: Brep::classify_point says exactly where a point lies against a body
- 7b3e66cba jyviko: kernel: Body::classify_point decides inside, outside or on the boundary exactly
- 3b88f1acc jyviko: doc: a hole decides whether it exits at its drill point's shoulder exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- cf2a15ace Brett Lawson: smlib: solidcore's four fork-carried opt-ins are on; only the trim base v opt-in waits
- c3f5bb40b Brett Lawson: smlib: a draft on solidcore keeps the body's tags and face history
- cd25e9e8f Brett Lawson: smlib: a face section on solidcore cuts planes, cylinders, cones and spheres too (solidcore#1769)
- 9c1f8904e Brett Lawson: solidcore: move the pin to 43ed10e54 (main, with solidcore#1650, fixing #1631)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6f0bf0dea jyviko: Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
- 3772a6e97 jyviko: kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
- 9308224ef jyviko: Fillet rig: the knife edge's 0.5 chamfer builds
- 58e0d8346 jyviko: Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 04955683f jyviko: Tests: a strip's tangent and curvature run-offs are the distance long across the surface
- 4f64a035a jyviko: kernel: one smooth angle, and a round too small to change the part is refused
- c23ef9d93 jyviko: Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
- 6f7172dc8 jyviko: kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9760feed4 jyviko: Kernel: a body's record of rounds goes with its history, and can be read back
- f3cf0c4f3 jyviko: Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
- 134a34f89 jyviko: Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
- 456e5b7fa jyviko: Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8ed4663ae jyviko: Mesh convert: a reconstructed bore is one wall, so the bracket has 9 faces
- 6d8e002f8 jyviko: UI: rim and wall picking tests for a circle of arcs that is one wall
- 3e5b358af jyviko: Fillets: a later round at a corner where earlier rounds meet blends them again with it
- 5d1b18f40 jyviko: Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ae53d387 jyviko: Preferences: metric tapped holes drill only the tap maker's drill
- a71450aeb jyviko: Preferences: symmetric surface extrudes read only the total distance
- 26b42048c jyviko: Preferences: the Body check note says each option in one short line
- 2c1901371 jyviko: kernel: the record test takes the one wall a circle of arcs extrudes to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 709765fca jyviko: Model cache: a saved model records its body check mode and is adopted under it
- 393c83c2a jyviko: STEP import: a solid the kernel refuses, its faces too, is refused with the reason, never a mesh
- 6700e6ef1 jyviko: kernel: a body SMLib keeps in the record's order is mapped, whatever order its export lists
- 222211de4 jyviko: Model cache: a thinned model keeps the check mode only as the model records it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e43fe1ab0 jyviko: Kernel rig: diagnostics.validation is a setting, exempt from cases
- b24d90269 jyviko: doc, ui: a feature that lost a reference asks for it to be picked again
- d62d248b7 jyviko: doc: Untrim's face points pick faces of the body it untrims
- 1b08d4b8b jyviko: doc: a feature's face points are named on its own component's bodies first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5d80fc571 jyviko: Engine: diagnostics.validation reads and sets the mode
- 1a93a3977 jyviko: CLI: run and kernel-cases take the validation mode
- 50501fe14 jyviko: Preferences: Body check, once per feature by default
- 6a133042c jyviko: Preferences: the body check is the kernel's, not named after SMLib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
`paper::annotate` places the marks that point at things on a sheet as plain
strokes and fills in sheet millimetres: open, closed and filled arrowheads,
the oblique stroke and the dot, and leaders (points, a landing line in the
reading direction, a terminator at the first point). Every size is the
caller's; ISO 128-2's dot and landing ratios and ISO 129-1's 15° to 90°
arrowhead angle are constants beside them. A closed or filled arrowhead stops
its line at the base. Dimension layout stays W19c's (#4896) and the datum
triangle the datum symbol's (#7257).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Brings the 1,270 commits on main since the drawings branch last met it,
including the first drawings landing (#8249), into drawings.
Merged with the drawings snapshot that #8249 landed (ebafe0748) as the
merge base, so only the drawings work after that landing is replayed on
top of main. Main's structure wins; drawings' additions are kept and
adapted to main's APIs (metadata Owner/KEYS table, checked! without a
contract argument, Snapshot visibility, crash journal outcome, the
part-properties normalisation, model_body_components, io helpers).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 292ec65c8 jyviko: Fillet rig: the chamfer running into the openings is named for what it does
- 051a7b714 jyviko: Kernel tests: rustfmt
- 4030b795c jyviko: Kernel: a validation mode decides when sweeps, booleans and blends are checked
- 9acbcf924 jyviko: Evaluation: under each_feature a feature's kept bodies are checked once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b4af45dd0 jyviko: Kernel rig: the horn torus and the circle revolved touching its axis build
- f1199f89b jyviko: Joint drive: contact is decided on the exact bodies, not their display meshes
- 3a2fac31a jyviko: Kernel tests, fillet rig: a chamfer as wide as its rim builds
- 1878274cb jyviko: Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e46359ff0 jyviko: Kernel rig: the patch cases the fill now builds come off the known-failing lists
- 7c9e5ec69 jyviko: kernel: a seam held as two edges is one join, drawn whole in the shaded view
- 12496c2c1 jyviko: Tests: a round flange stays an exact circle through unfold, refold and DXF, with a cut near its rim
- 7fe880a7b jyviko: SMLib: pin f8fd83e (tangency-labs/smlib#66)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 5314031ba Brett Lawson: smlib: solidcore's tangent-face edge check and horn-torus revolve opt-ins are on
- 81088bf0c Brett Lawson: smlib: a sweep along a bent path is tested on solidcore (solidcore#1628 is fixed)
- a6b280467 Brett Lawson: solidcore: move the pin to 3569b5d73 (main, with solidcore#1665, #1681, #1614, #1677)
- 0bed45d82 Brett Lawson: smlib: solidcore's planar thicken side walls opt-in is on; four opt-ins wait for the fork
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5941c0d0 jyviko: geom: a general fill's crown fills out to the side its neighbours' normals face
- f7409dd59 jyviko: geom, kernel: a loop with fewer than three corners is filled by a ring of patches
- c088cf43e jyviko: geom: the patches about a centre are solved the same to the last bit on every run
- 25e275722 jyviko: Tests: a patch's continuity g3 is valid, g5 is the hostile word
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49377d318 jyviko: geom: patches about a fill's centre join G1 there, with the linear gluing function
- 55cb6b32b jyviko: geom, kernel: the patch fill's sides run from corner to corner, not edge to edge
- 62d41a0cf jyviko: Tests: the fill tests evaluate a face's (u, v) on its NURBS form
- 30b12cea8 jyviko: geom: a crowned height field rises by the whole crown at its box's middle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5732b62ec jyviko: Tapered extrude: the end check of a profile with holes takes the section a swallowed line leaves
- 738f336e1 jyviko: Raytrace: a closed box dielectric is certified from its mesh's geometry, in any tiling
- 9243b6550 jyviko: SMLib history: a split line between two pieces of one face comes from nothing
- 013978724 jyviko: geom: the patch fill's cross-boundary targets agree with its corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fb5ae6cdd jyviko: SMLib import: an extruded circle's circle comes from its widest span, not the face's range
- 17a466e6b jyviko: Ruled surface: a free strip on a straight edge gets a far curve that can bend
- f2982b47a jyviko: Sheet tests: the tiny cut inside the exact circle is above SMLib's modelling tolerance
- cf40a3e6c jyviko: Boolean regression test: the raked wedge's R4 rounds the four edges the issue picked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0b7468729 jyviko: Curvature comb: every comb shown at one scale, kept by the command
- 6ab96c658 jyviko: View analyses: one toggle group, its state in the session
- 9a45d4248 jyviko: Kernel rig: inspect.analysis is a display analysis switch, exempt like the others
- 8d590c198 jyviko: Kernel tests: the long-setback G2 patch's reach past the box from its exact surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfa84e84d jyviko: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly
- 6cc759750 jyviko: SMLib import: an extruded circle is a cylinder over the face's trimmed range
- 9b3572797 jyviko: Fillet rig: the known-failing list names the report- cases, not their old ids
- 9851718ea jyviko: Curvature comb: purple envelope and orange teeth from their own theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 2d84f8a17 Brett Lawson: smlib: solidcore's new opt-in fixes are on: sliver iso curves degenerate, Coons corner patches tangent to their sides, a fillet's own edge kept at a corner patch, the corner ball centred where the axes meet, one solution for a seam point, 2D boolean covers of far faces, area only between solid and void, a coincident definition split across the split point, the tight box from the interval's knots, overlapping bands refused, and the SSI tangent-curve tracer
- 0877278d6 Brett Lawson: solidcore: move the pin to 2b81c033 (main, with solidcore#1640, #1623, #1655, #1673, #1668, #1662)
- 97a475d8d Brett Lawson: smlib: solidcore's torus check and step-wall opt-ins are on: the torus check reads its V interval, a spindle torus through its apex is a self-intersection, and a local operation builds the step wall between tangent faces moved apart
- f4eec76b4 Brett Lawson: solidcore: move the pin to dca3135cc (main, with solidcore#1630, #1632, #1649, #1664)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c9bf97ce4 jyviko: Blends: an edge is smooth only where its faces are tangent all along it
- 1e6c91a10 jyviko: Fillet rig: the concave arc where a bar's top meets a cylinder its sides run tangent into
- de9c005f2 jyviko: Blends: a blend face is named by its picked edge, not an edge it took up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf85e0a6c jyviko: Fillet rig: the knife edge's R2 round builds on the new SMLib pin
- 739e47b9d jyviko: Kernel tests: the basin rim chamfers check the kernel's refusal kind, not the named size
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94938b3b5 jyviko: Kernel rig sources: the kinds of the four sources the new cases cite first
- 191fa9839 jyviko: Fillet rig: the R7 round past a thin wall's inside corner held to its exact volume
- ecbca1f74 jyviko: Fillet rig: grade the 851 rows' rounds G1 at their own tangent seams
- 30dce7fba jyviko: Fillet rig: the sloped basin's rim loops with their mitred corners' exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8b9e0e0c0 jyviko: Continuity rig: an opened tube end capped G1 and G2, as cases
- 24a58066c jyviko: Sweeps rig: a circle touching its axis revolved a quarter turn, as a case
- 51316b7ec jyviko: Import rig: the horn torus quarter written to STEP and read back, as a case
- 8524458ce jyviko: Tests skill: when a check is a unit test and when it is a rig case
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 368b34e3b jyviko: Tessellation: a curved face's grid reads the quarter turn from its surface, not its parameter
- 9da160892 jyviko: Tessellation: two corners of a face a hair apart, within their tolerance, are one point of it
- 7cbbe2bc2 jyviko: Tessellation: two curves that touch within the chord tolerance share nodes, so the face pinches there
- 95f1258b7 jyviko: Motion interference: a collision is deepest where the parts share the most volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c1328212d jyviko: Tests: curved bodies' contact stop is checked, not the sweep's internal step
- 172c64cef jyviko: Tests: the naming corpus checks that references resolve and builds agree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ea43b5c2 jyviko: Tests: a tray's sheet names are checked by where their points lie
- 978ae1d51 jyviko: Tests: a mirrored sheet's flat pattern is its source's mirrored, as the code makes it
- 2be7b1b6f jyviko: Tests: the extruded ellipse is checked by its area, not its face count
- 51855589d jyviko: Tests: Open in EasyPrint's STL is read back, not measured in bytes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4d7553dd8 jyviko: Kernel tests: a ruled strip's moved handles are checked on its far curve
- 21c1ed541 jyviko: Kernel tests: rim rounds meeting at a concave corner are mitred, not swept
- 03054211b jyviko: Tests: the arc-touching cut is checked by its volume and area, not its face count
- 5e7e1485c jyviko: Tests: the knife-edge R2 fillet is checked once, in closed form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5229bbedd jyviko: Kernel tests: a small bend's display mesh is graded on the display mesh alone
- 4ff38619c jyviko: Kernel tests: the rounded shell's planar roles are graded by name and exact volume
- a3848d1d0 jyviko: Kernel tests: modifier histories are graded by what each face is, not how many changed
- a45d56aa9 jyviko: Kernel tests: the slot plates' STEP files are graded by their bounds and volume, not surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a0c24b87c jyviko: Kernel tests: the back edge then the arc is one more pair of the rounds-in-sequence test
- c69dbc5d3 jyviko: Kernel tests: the collapsed taper's mesh is held to its B-rep, the taper to validity
- 87e9123d3 jyviko: Kernel tests: a crowned patch's hostile crowns are refused for their range
- 65718cd41 jyviko: Kernel tests: the five- and six-sided fills are graded by what they make, not their face counts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3569298a4 jyviko: Kernel tests: a chamfer whose leg runs off the thin rim is refused, naming the largest
- a8f393ca3 jyviko: Kernel tests: the tabbed plate's rim rounds take their exact volume
- 5af467aef jyviko: Kernel tests: the box rounded after separate bottom rounds takes its exact volume
- 659bd866b jyviko: Kernel tests: the #871 part's fitting rounds take their exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2f88ca2f6 jyviko: Kernel rig: everyday chamfers of box edges and pocket rims
- 51641123c jyviko: Kernel tests: drop the mixed arc-and-line mitre test, the rig's 485 grades it
- e9963439b jyviko: Kernel tests: the round into a hole moves to the rig, with the hole cut the test's way
- 65e46a962 jyviko: Kernel tests: a round as tall as its wall and more builds on the disc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01d0d6bb9 jyviko: SMLib bindings: a curve list holds up to 16384 curves, as the C API now takes
- 96b248d28 jyviko: Kernel tests: a slot narrower than the taper closes partway up and builds; a closing hole is refused
- 42d4d0ecd jyviko: Engine tests: rounding the long edge then the left upright matches the three edges their chains take
- b66821c82 jyviko: Kernel tests: the third round at a mitred corner takes its tangent chain, a sphere octant
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 785b78bea jyviko: Surface Fair test: fair the B-spline patch on a saddle rim, not an offset sphere
- 1817cffaf jyviko: Shell: a basin shelled past its 4 mm rim measures its exact sharp offset
- 2e123eb3d jyviko: Kernel tests: a swallowed tip's volume is the drafted wedge's, every wall at the taper
- 1661fe292 jyviko: SMLib: pin 985faae, the batch of 2026-10-30 evening (tangency-labs/smlib#63–#65)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 3346f4172 Brett Lawson: smlib: solidcore's new opt-in fixes are on: UV trim checks on the surface, loop orientation from the loop's box, cones extended as themselves, the local operation's box, joined drop pieces, exact edges on analytic faces after a shell, and the two SSI trace fixes
- 271f0a39e Brett Lawson: smlib: a face's planar section runs on solidcore, as the capi's smlib_face_section (solidcore#1534)
- 436fae56a Brett Lawson: smlib: drafting a cylinder's side runs on solidcore (solidcore#1606, fixed by #1611)
- 39adb66ad Brett Lawson: solidcore: move the pin to 55748ecf (main, with solidcore#1648, #1645, #1644, #1641, #1639, #1637, #1636, #1634, #1657, #1656, #1654, #1653, #1652, #1651, #1598, #1622, #1618, #1616, #1603, #1626, #1661, #1658, #1660, #1629, #1663: attributes through offsets, shells, booleans and copies (#1462 P2, P4), the tight box from the interval's knots (#1054), a merge's UV trims named after their edge use (#435), SM_API ordered-point surfaces, exact projection copies, and the fork's WR-562, WR-547, WR-546, WR-541, WR-537, WR-536, WR-535, WR-533, WR-542 and WR-75 opt-ins)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 97d79e3b8 Brett Lawson: smlib: the solidcore tag test names what still holds it back
- 6a3558a96 Brett Lawson: smlib: a sweep along lines and arcs goes piece by piece on solidcore, as the capi does
- 1feba5af9 Brett Lawson: smlib: the bent-path sweep's ignore cites solidcore#1628
- 9ceddd9d5 Brett Lawson: solidcore: move the pin to 937a6319 (main, with solidcore#1534, #1537, #1544, #1617, #1608, #1582, #1591, #1625, #1586, #1619, #1620, #1611, #1647, #1646, #1643, #1642, #1638, #1635, #1633: planar section curves, SM_API intersections, cut, HCR silhouettes on solids, UV trim checks on the surface and tiny loops oriented, projection, trimming, tessellated boundaries and knot removal, the fillet refusal that leaves the body unchanged, Cone::lean_cylinder as a cone, and the fork's WR-260, WR-550, WR-545, WR-543, WR-80, WR-534 and WR-532 opt-ins)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 73b053221 jyviko: Face capture test: extruding a split face in an uncaptured component is refused
- 918429c6d jyviko: Sheet machining: a trimmed To Object tool is measured as the prism its record proves
- f37b95498 jyviko: Native B-rep: a body is written as it serializes, not through a JSON value
- 298869f4d jyviko: Engine tests: the hostile-parameter test builds its starting model once per command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Drawing sheets on paper: the drawing border, grid and marks (#4890 A6, #3875)
SheetLayout::paper gives what a sheet's drawing border draws as paper
groups of kind drawing_border, in order, each left out when empty:
- the drawing border, one closed stroke drawing_border_line_mm wide
(0.7 mm in the built-in profile, ISO 5457);
- the grid: the grid reference border, closed, and a mark at each edge
between two fields from the drawing border out to it, on all four
sides, GRID_LINE_MM (0.35 mm, ISO 5457's grid line width as the
drawings study's section 11.3 gives it) wide; none without fields or
with the grid reference border on the drawing border;
- the centring marks, as the layout places them, in the drawing
border's width, as the profile says;
- the trimming marks, each rectangle filled.
The grid's labels are text and come once the paper scene has text
(#4813). Only the function, its constant and its tests are added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets on paper: one sheet's scene, its border then its views by id (#4890 W10, #3890 W15)
`drawing_scene::build` draws one sheet of a drawing as one paper scene, the
one the sheet page and every export will draw, and `drawing.scene {sheet}`
answers it (in_drawing, noundo, doc_only, typed contract and output schema).
In paint order: the sheet's drawing border groups as `SheetLayout::paper`
gives them (object: the sheet), then each view on the sheet by id (object:
the view), its visible lines as `paper_group` makes them.
- A view's lines are worked out centred on the view and then moved to its
centre, exactly (each point plus the centre), so the same lines on the same
centre are the same bytes. They match the snapshot's within rounding.
- The shown set is worked out once per sheet. No model is evaluated.
- A view with nothing to measure is a placeholder, and one that can't be
drawn yet (shaded, or hidden lines) fails with the snapshot's reason. Each
draws nothing, and the sheet's other views are still drawn.
- A view is placed only while the sheet stays within the paper scene's
100,000 records. One that would pass the limit fails and says so, and later
views that fit are still drawn. Each view's lines are placed as they are
drawn, so at most one view's lines are held beside the scene.
- A view above 100:1 takes a coarser chord rather than asking the mesh for
chords below its floor. A saved view has no chord setting to give.
One rule, one place:
- the snapshot's two style refusals are `drawing_view::not_drawable`;
- a group's record count is `paper::Group::records`, which `Scene::validate`
now counts with;
- the stats reply is `From<Stats>`;
- both paper scene schemas come from `paper_scene_schema`.
Tests: the border then the views by id, byte for byte against the layout,
with hand-worked outlines and lengths; the command's reply and its schema; the
SVG's group order; each view against the snapshot, and one of many lines (a
block with eight holes, from above); an empty sheet; a failed and a
placeholder view; no evaluation; refusals; the record limit at exactly 100,000
and one past it; a 200:1 view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets on paper: the provider the sheet page draws through (#4890 W10, #3890 W15)
The sheet page asks for a sheet every frame, so it draws through a provider
that keeps each view's lines between frames, instead of through `build`.
- `drawing_scene::extract(session, sheet)` returns the last scene at once,
with each view as it was last drawn and the ones out of date. Nothing is
drawn there. When the drawing, the world state and the views drawn are all
as they were, it returns the same answer without looking at the sheet.
- `drawing_scene::step(session)` draws the first out-of-date view of the
sheet last extracted and says whether more wait: a short piece of work for
the UI's tick, one view's projection.
- `generation` comes from one counter for every session. It goes up only
when a sheet's scene is assembled again, so a page never sees one number for
two scenes, even across closing and opening its drawing.
The cache is the session's view state, beside the record: never saved, never
an undo step. `Session::execute` drops it when a command closes the drawing or
opens another. One entry per view, keyed by the world state it was drawn from
(held in the entry and compared with `Arc::ptr_eq`) and the view as it resolves.
A drawing-only edit keeps the world state, so a move, and its undo, project
nothing: the same centred lines are moved to the new centre. The shown set is
worked out once per world state. Views no longer in the drawing are forgotten
when a scene is assembled again.
Tests:
- a new cache gives the border with both views out of date;
- each step draws one view, in id order, until the scene is `build`'s, byte for
byte;
- the generation stays put while nothing changes;
- a move and its undo project nothing, and the views move by exactly the move;
- after a model change (a checkpoint restored) the last scene shows, and a view
listed as up to date always draws as `build` does;
- closing drops the cache, and the scene after reopening has a new generation;
- seeded mixes of moves, setting edits, undos, redos, extracts and steps
always end at `build`'s scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing export: a sheet of the open drawing as SVG, from its scene (#4890 A7)
drawing.export {sheet, format?, path?} writes one sheet of the open
drawing from drawing_scene::build's scene, the scene the sheet page
draws, so a file shows what the page does: its drawing border, then
each view's visible lines, through the SVG writer. With a path (a .svg
file, checked by vfs::check before and again just before writing, as
the view DXF is) the file is written atomically; without one the reply
holds the SVG. The reply gives its size, what the writer snapped or
merged, and each view's status as drawing.scene reports it.
A sheet with a view that failed isn't written: the refusal names each
such view with why. A placeholder view (nothing to measure) draws
nothing and is exported all the same. PNG and DXF are "not supported
yet": they come with the sheet PNG writer (#4890 A4) and the shared DXF
writer (#5319). No undo step; no model is evaluated.
One rule, one place: the scene's sheet look-up is
drawing_scene::sheet_id, and a view's reply entry is
From<ViewState> for SheetSceneView, both used by drawing.scene and
drawing.export. The scene tests' drawing fixture is open to the crate's
tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`bom_quantity` is a part property of any component: what one placement of it means, an expression
evaluated with the design's parameters (pieces without a unit, else a length). A row's `quantity`
is what its placements add up to, with `quantity_unit`; pieces beside a length, or a quantity that
no longer evaluates, give none and say why. A quantity is a parameter user: a rename follows it, and
a parameter it uses can't be deleted. The CSV gains a `quantity` column at the end.
`virtual` marks a component with no geometry (grease, paint, a label): listed with its quantity,
weighing nothing. It can't be the active component, and one check after each undoable outermost
command refuses any change that puts a body, a sketch or a placed component into one, whichever
command made it. A file a damaged virtual component already fills opens, and other changes go on.
Mass, volume and area quantities wait for the expression units of #4811.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01477bb14 jyviko: Tests: the saved curved strip is the link a truck build saved
- 0c4f54edf jyviko: rustfmt
- 74001e532 jyviko: Tests: check what each operation is for, not how many faces it makes
- a84369fe7 jyviko: Sheet convert: a wall cut off at its strip keeps each corner with its own edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Bill of materials types on one occurrence (#3874)
An occurrence can count in the bill of materials as another type than its
component, for that occurrence only: `bom_type` on the occurrence, set with
occurrence.bom_type (one undo step; it changes no geometry, so nothing is
evaluated). An occurrence without it counts as its component, so older
designs need no step; the format change is one pending file
(occurrence-bom-type.rs).
assembly.bom counts each placement by its own type: a purchased placement of
a kit part is one row without the kit's contents, a phantom placement lists
what it holds where it sits, and one component placed as two types gives a
row for each. Paste New keeps the types; Paste Instance counts as the
component. The compact list and the locales (en, de, ja, ko, zh) carry it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials rows: material, and mass when asked (#3874)
Every row of assembly.bom (and every part folded into a row) names the
physical materials of its definitions' own bodies, each once, with "; "
between several. An unassigned body's is Default. A subassembly or an
empty component has none of its own.
With mass: true each row also carries mass_g, what one of its parts
weighs as the row stands for it, so the rows of any list add up to the
assembly once:
- at the top level, all it holds;
- in parts only, its own bodies, because what it holds is listed beside
it; but a folded part's row is the kit (all it holds), a purchased part
is all it holds, and an inseparable one all but its purchased parts;
- a reference placement adds nothing, nor does anything inside it.
It is null when nothing in the part has a body, a body can't be
measured or measures a negative volume (inside out, such as an open mesh
facing the origin), or the definitions sharing the row's part number
weigh differently.
Measuring runs the kernel, so it is asked for: the Bill of Materials
window re-runs assembly.bom after every change and doesn't ask (0.2 ms
without mass, 135 ms with it on a bolted bracket). Placements are rigid,
so each definition is weighed once however often it is placed, and each
body is measured once with measure_mass (the same volume as measure,
without the topology counts' tessellation).
A body's material and its density now follow one rule:
Document::body_material (new, beside Document::density) is the material
its mass is worked out with, named as the library or the design spells
it: the assigned one when it is known and has a usable density, else
DEFAULT_MATERIAL (new, beside DEFAULT_DENSITY). Document::density is
that material's density, with the same values as before. So a damaged
file's unknown or broken material reads as Default, as it weighs, and a
hand-edited "steel" reads as Steel. The bill of materials uses both; the
other places that read a body's material or spell "Default"
(component.properties, inspect and others) move to them in a separate
cleanup PR for #4783, which brings the same two functions to main.
Document::body_owners returns each body's owner in order, so the rows
find their bodies in one pass. It no longer repeats the owner rule:
model_body_component, legacy_body_component and body_owners go through
the rule written once, given how to find a feature's component (the
timeline for one body; body_owners still builds its map once). The CSV
columns are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Physical properties: a reference placement adds nothing (#3874)
component.properties and occurrence.properties now leave out a placement
that counts as a reference in the bill of materials (its occurrence's
bom_type, else its component's: a fixture shown for context), and
everything inside it: no body entry, mass, volume, area, centre of mass
or bounding box, and it isn't in placement_count. That is the bill of
materials' rule, so a reference part is in neither the parts list nor
the assembly's mass, and every bill of materials list still adds up to
the assembly's Properties. The placement asked for counts whatever its
type: a reference fixture's own Properties still measure it and what it
holds, as a component's own bill of materials lists what it holds.
Only the totals change. The placements walk that face picking, sketches
on placed faces and the occurrence path lookup use stays complete, so a
reference fixture's faces can still be picked.
The type an occurrence counts as is now written once:
Document::occurrence_bom_types (new, beside BomType) gives each
occurrence's type in their order, looking each component up once. The
bill of materials, occurrence.bom_type's reply and the physical
properties use it, in place of the two copies in the bill of materials.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: one module of typed rows in doc (#3874)
The bill of materials now lives in solidcraft_doc::bom as the typed rows
of a bill of materials view. assembly.bom's JSON and CSV and the Bill of
Materials window present those rows; parts lists, item numbers and
balloons are to read them too.
- list(tree, request) walks the placements below the assembly once. One
rule (classify) decides for each placement whether it is counted in a
row, how what it holds is walked and what its row stands for when
weighed, from the type it counts as, the view and the component's
shape. "An inseparable part's purchased parts are listed beside it" is
written there once, and the mass walk reads it.
- A row carries its identity (RowKey: the rows it is listed under and
its lowest member, a component and the type it counts as), its item,
count, each, the placements it counts by occurrence path, what it
stands for (Holds), its part properties, materials, mass and children.
- Mass is a Mass: not asked, grams, or unknown with the reason (nothing
to weigh, unmeasurable, the definitions differ). Each definition is
weighed once for each kind of row and kept in the Tree. The assembly's
total is weighed from the design the same way, not added up from rows,
so it is known even when a row's definitions weigh differently.
- Bom::row_of(tree, path) finds the row a placement is counted in (a nut
inside a purchased bolt is in the bolt's), or says why there is none:
no such placement, a reference, or no row of its own.
- rows_deep() lists each row followed by its children (1, 1.1, 1.2, 2);
Request::default() is assembly.bom {}; View and Group carry the
commands' words.
What changes, beside that the output is otherwise the same:
- One placement budget (100,000) and one depth limit (64 levels) cover
the whole list. A folded part's contents used to be walked under a
budget of their own, so a design past the limit was listed with
group_children; it is refused now, as it already was without it.
- Kits are compared by what they hold (part, type and count), not as
text: a part without a part number whose id is 12 no longer reads as a
part numbered "#12", nor a part numbered "P×1\nQ" as a P and a Q. Kits
holding the same parts through different definitions (two bolt
definitions, each with its own nut definition of one part number) are
one row, and its children count every bolt's placements, where they
showed the first bolt's definitions only.
- A folded part's row always stands for all it holds. It used to stand
for its own bodies when nothing inside it was listed, which differs
only for a phantom with bodies of its own inside it.
- An inseparable part's row in parts only names the material of what it
stands for (its steel blocks read Steel) where it was blank, and a
subassembly whose parts share one material names it at the top level.
- A damaged file's component placed inside itself is refused at the first
level too, since naming a row's material walks inside it, as weighing
it already did.
- A row's body count saturates, so a compact assembly with more placed
bodies than a count holds (a block placed 2^64 times) is weighed
instead of overflowing.
Materials follow Cameron's rule for a row that stands for an assembly
(C3, 2026-10-23): a part's row lists its own bodies' materials, as before;
a row that weighs what is placed inside it (a subassembly at the top level,
a purchased or inseparable part with parts inside it, a folded part) names
a material only when everything it stands for shares it, else none. A frame
of steel and aluminium parts reads blank, and a bought bearing of steel
parts reads steel. One walk (adding) decides what is placed inside a row's
part for both its mass and its materials, and each definition's materials
are read once.
Components are looked up by id once per list; they were searched for
each row and each kit. The window reads the rows directly instead of
running assembly.bom after every change, so it no longer adds an entry
to the crash journal each time it refreshes. The engine keeps the
command, its parameters and the files.
Tests check rows. The module's own: an empty assembly, one part, a row
named by its lowest member through part-number edits, one part number
of two types, a phantom in a phantom, a reference at the root and its
own list, the 64-level limit, the budget hit exactly with and without
folding, kits told apart by what they hold and the types they hold it as, a folded part's contents not
folded again, row_of for every type, every placement in one row or
none, a damaged file's missing component and cycle, the mass agreement
rule (moved from the engine with row_mass) and what adds to a row. In
the engine: the material rule for every kind of row, the JSON against the
rows for every option, why a mass is
unknown, the total against component.properties in every view, what a
row stands for and its placements, and the overflow. The assembly.bom
tests from #1888 on pass unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: structured, all levels (#3874)
P4: `assembly.bom {levels: "all"}` lists the assembly's direct contents, each subassembly a row with
its own rows listed under it, to any depth (items 1, 1.1, 1.1.1), each child counted `each` per one
of its parent and `count` in all.
- `doc::bom::View::AllLevels` goes through the one rule (`classify`) the other views use: a
normal subassembly is a row holding what it holds, listed under it as all levels again; a
phantom has no row and what it holds joins the level it sits in, merged with the same parts
there; a purchased part is a row with nothing under it unless `show_purchased_contents`
(Request::purchased_contents) asks for its contents; an inseparable part is a row with nothing
under it; a reference counts nowhere.
- The rows under a row are the folded-part rows already built (kits), so subassemblies with one
part number and different contents are different rows, and no second nested builder is written.
All levels gathers every level as it gathers the first; a folded part's contents are still
gathered by part number in the other views.
- The JSON and CSV already nest to any depth; `show_purchased_contents` is echoed with the other
options. Each row's mass still adds up to the assembly at the top.
Tests, worked by hand: four bolts and a two-bolt subassembly placed twice (8 bolts in parts only;
in all levels the subassembly twice with 2 bolts each, 4 in all, beside the top's 4); three levels
deep (2 x 3 x 2: counts 2, 6, 12, items 1, 1.1, 1.1.1, the CSV in that order); each type (a
phantom's bolt merged into its subassembly's, purchased with and without its contents,
inseparable, reference); two subassemblies of one part number with different contents as two
rows; `levels: "deep"`, a flag that isn't one, and an assembly over 100,000 placements refused.
D's test that a folded part's contents are listed as parts only lists them now names the two views
it holds for, and checks all levels' nested rows (the subassembly inside the folded part a row with
its own rows).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: parts with one part number are one row only when they hold the same to any depth (#3874)
The kit compare looked one level down: two parts with one part number whose contents differed two
levels below merged into one row, and the children that only one of them held came out at each 0.
Each placement now has a kit, a number interned from what it holds (each child's part, type and
own kit), built in one pass from the last entry back: an entry's children come after it in the
walk, so their kits are known first. Rows are told apart by that number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: a phantom's own bodies are a row of their own (#3874)
A phantom had no row, and its own bodies were weighed in the assembly's total but in no row, so
the rows didn't add up. Its own bodies, when it has any, are now a row of the phantom's type that
stands for them alone, as a subassembly's own bodies are in parts only; what it holds still counts
where it is placed. Inside an inseparable part in parts only, nothing changes: the part's row
weighs them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: the assembly's total mass in assembly.bom (#3874)
`list` weighed the assembly as a whole (from the design, not added up from rows) and the command
dropped it. `assembly.bom` now gives it as `total_mass_g`, and so does a JSON file it writes, only
when `mass: true` (null when it isn't known).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: all levels as JSON lists its rows one after another (#3874)
All levels nested each level's rows in the row above it: two JSON containers a level, so the
64 levels a list may hold came to 129, past the 128 that serde_json (and so the MCP server and
the control channel) reads. In all levels `assembly.bom` now gives the rows one after another,
each followed by the rows under it (items 1, 1.1, 1.1.1), as its CSV does; a row listed under
another still reads its item as text and gives `each`. A folded part's contents, one level, stay
inside its row as `children`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: a row whose definitions weigh something and nothing differs (#3874)
A row gathering a definition with bodies and one with none (one part number on a steel block and
on an empty assembly) said there was nothing to weigh. Their masses differ, so it says so; only a
row where none of them has a body has nothing to weigh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: definitions agree on a mass within the measurement accuracy (#3874)
A row's definitions had to weigh the same to 1e-9, but the kernel measures a volume from
tessellations, and one part modelled another way is tessellated differently: a pin made as a
cylinder and as a revolved rectangle measured 1.05e-5 apart, so it read as two masses. The bill of
materials now has its own `bom::MEASURE_ACCURACY` (1e-4: ten times that gap, with its doc on what
it follows: the kernel's `measure` gives one solid's volume to about that, relative, however the
solid was modelled), and a row's definitions agree within it. A pin 0.1% wider (0.2% heavier) still
differs. The kernel is unchanged: its work is paused while it is being replaced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials guide: all levels, purchased contents and this round's changes (#3874)
The guide had no `levels: "all"` or `show_purchased_contents`. It now has both, with how all
levels tells subassemblies apart and lists its rows as JSON, a phantom's own bodies as a row, the
assembly's `total_mass_g`, and definitions that agree on a mass within the measurement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: materials are bodies', as the code says (#3874)
The rule stays as built (a row that stands for an assembly names a material only when everything
in it shares one), but its comment and the guide said a material set on a component is set on
all its bodies. `material.assign` takes bodies only: a component has no material of its own yet.
The module notes now say so, and where component materials will join the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: a body's volume measured once with the evaluated model (#3874)
`assembly.bom` measured each definition's bodies anew for every list, and `component.properties`
measured each placed body again. A body's measure depends on nothing but the body, so the evaluated
model keeps its volume (`ModelBody::volume`, shared by clones, as its outline box is), and both
commands weigh that one measurement: the same grams to the bit. A body offset scales it by the size
of its determinant (`mat_volume_scale`) instead of copying the B-rep to measure it. The physical
properties still measure the placed body for its area, centre, box and counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: row keys, what rows stand for, members and row_of stay in doc (#3874)
Nothing outside `doc` reads them yet: `RowKey`, `Unlisted`, `Holds`, a row's `key`, `stands_for`
and `members`, and `Bom::row_of` are crate-private until item numbers and balloons need them, so
they can still change without breaking another crate. The engine test that read them is covered
by doc's own (`row_of_finds_the_row_a_placement_is_counted_in`, `every_placement_is_in_one_row_or_none`).
`Unknown` stays public: `Mass::Unknown` carries it, and a public enum can't carry a private type.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: one fallible placement walk for totals that cover the whole assembly (#3874)
The physical properties walked the placements twice in their own code, with the 64 levels and
100,000 placements written as literals, and the bill of materials gave the same refusal in words
of its own. `Document::placements_below` is that walk once, from any placement, refusing what is
past `MAX_PLACEMENT_DEPTH` or `MAX_PLACEMENTS` (never walking it in part), and both use its
refusal: "the assembly is deeper than 64 levels or has more than 100000 placements". The physical
properties now allow 100,000 placements below the start, as the bill of materials does (they
stopped at 99,999).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: the same rows for less work (#3874)
- Part numbers are borrowed from their definitions (`Part<'a>::Number(&'a str)`) instead of copied
for every placement grouped and every kit.
- A row's members, the placements' paths, are built only when the list is asked for them
(`list_with`, for item numbers, balloons and `row_of`): the walk then keeps paths and moves each
into its one row instead of copying it. A list made for its rows alone builds no paths at all.
- `row_of` reads an index of member paths, built once with the list, instead of scanning every
row's members for each placement asked about.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* occurrence.bom_type: input and output schemas (#3874, #4035)
`OccurrenceBomTypeParams` takes the occurrence (an id or a name), its path when given and the
type (one of the five, `same_as_component` or null), each read by the handler's own reader: the
path through `cmd::path_ids`, split out of `occurrence_path`, the type through
`cmd::occurrence_bom_type`, split out of the handler. The handler builds its reply from
`OccurrenceBomTypeResult` ({occurrence, bom_type, effective, changed}).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials tests: all levels presented at every depth, and its caps (#3874)
- `assembly_bom_presents_the_typed_rows` now covers all levels (with mass, purchased contents and
by definition) and the total mass, on a three-level design with a purchased gearbox holding a
gear, comparing every field of every row down to 1.1.1.1.
- All levels lists 100,000 placements and 64 levels, and refuses 100,001 and 65.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: static materials, typed in for a component (#3874)
A value the bill of materials works out can now be typed in by hand for a component (a static
value, Cameron's choice of word). Material comes first:
`component.metadata.set {component, material}` takes any text up to MAX_TEXT_BYTES, and
`component.metadata` reads it back as `material`. It is shown wherever the component is listed,
at every level and in every view, over the materials worked out from its own bodies or an
assembly's blank, and the row carries `static: ["material"]`. Clearing it (empty text or null)
brings the worked-out material back.
It is kept the way `bom_type` is: a part property in the component's metadata (`material`), so
there is no format change and older releases keep it. `PART_ONLY` names both keys in one place:
Design Properties doesn't list them and `document.metadata.set` refuses them. Another tool's
non-text value is kept and reads as no static material.
The bill of materials says one thing about the part everywhere: a static material also stands for
the part in the one material an assembly around it shares (two parts typed in as S355 make their
frame read S355; S355 beside plain steel reads blank). A phantom's row is its own bodies, so its
static material names those only, and what it holds keeps its own. A row gathering several
definitions takes the first one's that has a static material, as its description does. It only
names: mass still comes from the bodies.
The CSV gets a `material` column at the end, so the other columns keep their places: what the row
shows, the static material or the worked-out ones joined with "; ".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: stable item numbers, saved with the design (#3874, P5a)
A numbered parts list keeps each row's item number under the row's key in
`assembly.item_numbers`, so a row keeps its number when others are added,
removed or reordered. New rows take the next number after the highest at
their level; Renumber restarts a view in list or item order and leaves
locked rows alone; duplicates are marked; numbers change no geometry and
are part properties in the undo history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* View DXF: its lines come from one module both view commands share (#5866, W07 V1)
The view DXF (file.export_view_dxf) finds its lines in four files private to the command: the
export meshes, the projection, the hidden-line scene and the progress stages. Drawing views
(W07's drawing.view) need the same lines, so the four move to engine/src/mesh_lines, with
three changes that let a caller other than the DXF use them:
- prepare takes the bodies to draw from its caller (the DXF passes the shown ones), and
names the caller's command in its errors;
- the lines are seen from a View (an origin, a right/up/back basis and, for perspective, the
eye's distance) instead of a viewport Camera; the DXF builds one from its camera, with the
same arithmetic as before;
- a sketch's polyline (Part) belongs to the module, so the sketch code no longer defines what
the scene draws.
The DXF writing stays in cmd/view_dxf.rs, with connect (the dashed-line joining), and the stage
names and cancellation text stay the DXF's. Nothing else changes: the module is the DXF's own
code, moved, and the DXF writes the same bytes as before for every case checked (see the PR).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* View DXF: the sketch runs go once the lines are made, and a box's outline pinned (#5866, review)
From the review of #6482:
- The sketch runs (up to 4,000,000 points) are dropped once the lines are made, as they were
before the move, instead of living through the DXF writing.
- `mesh_lines::prepare`'s doc says which errors name the command: those about the placements.
A body with no exportable surface, the memory budget and cancellation come back as the meshing
stage's own.
- A new test pins the lines themselves by hand: a plain 40 x 30 x 10 box seen from the front is
its 40 x 10 outline. Every line lies along a side, they add up to the 100 mm perimeter, and
nothing is hidden.
- The shared-geometry test hides the definition's first placement: the other two are still
drawn from the one shared mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: the bodies a view shows, worked out once per request (#5866, W07 V3)
A view's extents and, next, its lines read one list: each body the design places, with the
occurrences that place it and its definition's body name, in the world state's order. Choosing
occurrences and hiding parts (V4) and the reference split (V5) become filters on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a view's lines from the mesh projection, each named by what drew it (#5866, W07 V3)
drawing.view.snapshot now returns its lines: every shown body's edges and silhouettes from the
view DXF's mesh projection, seen orthographically on the view's basis, in pieces of one visibility
on the sheet. Each line names its occurrence path, its body and its source (an edge, as model.edges
numbers it, with whether it is a tangent edge, or a silhouette across a face). They are marked
approximate and sampled (Cameron's choice, 2026-10-27): the exact lines (W06) take over per body
after the kernel swap (V8).
- display_style visible or visible_hidden; tangent_edges hide or show; chord_mm, the paper chord
the meshes are asked for (0.001 to 1, 0.01 by default). The model chord is chord_mm over the
scale: the view DXF's 1 mm cap doesn't apply, so a view below 1:100 keeps its chord on paper;
its 0.0001 mm floor does, and a chord under it is refused with the chord_mm that would do.
- max_error_mm is a check, never a setting (the accuracy rule on #5866): refused while any piece
is sampled, with the count of pieces short of it.
- The three view DXF changes moved here from V1: each segment keeps its owner (its placement and
its edge or silhouette face); a stretch two sources share belongs to the nearest visible one,
else the nearest hidden one (level ones in owner order), ends where that changes, and counts as
covered; the triangles keep their faces for that. The view DXF asks for neither, so it merges and
writes as before. (Nearest, not first: a hole seen end on has its bottom rim under its top one,
and by owner order the bottom rim took the stretches it shows through, cutting the top rim up.)
- A mesh side between two faces every edge between which is drawn is no silhouette: it lies on one
of those edges, already drawn from its own curve. (Seen end on, a hole's wall faces neither way,
and the side it shares with the top face drew stray chords just inside the rim.) The triangles
keep their faces for it in both commands (4 bytes each, in the memory budget); without them the
view DXF drew a hole's rim twice, and a view DXF test now finds every line drawn once.
- A triangle seen edge on, its normal at most 1e-3 (cosine) toward the view, faces away whatever
sign the mesh's own error gives it, so no silhouette lies between two of them. (Seen end on, a
bend's surface drew its rows as chords beside its arcs: a 60° bend's outer arc 1.76 times over.
A view DXF test now finds each of its arcs drawn once.)
- Mesh positions within the tolerance weld: a position takes the key of the first one within it,
in its own rounding cell or a neighbouring one. (The faces round a hole's rim are meshed apart,
their copies of a rim vertex up to about 1e-7 mm apart, and copies either side of a cell
boundary never met: each copy's side was a boundary, drawn as a silhouette.) The view DXF takes
these three rules too; they change its lines only where a side lies along a drawn edge, a
triangle is seen edge on or a weld was missed. The sample designs' view DXFs lose lines, and
each line they gain lies within 0.0011 mm of an old one.
- One source's stretches join into runs within twice the tolerance the lines were merged at: the
merge drops spans up to that long, so a stretch can stop that short of a corner on either side.
- The tangent test is a stadium of cubic segments: the kernel marks a join smooth only between
faces swept from cubic segments, and one between two pieces of one surface is a seam, never
drawn; a fillet's round keeps its edges, as the viewport draws them.
compile fix by the personal PC
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a circle facing the view is drawn as its exact arc (#5866, W07 V3)
An edge that is a circle, or part of one, in a plane parallel to the view
is drawn as its exact arc from Body::planar_edges instead of the mesh's
chords. Where the mesh projection says its visibility changes, the arc is
cut there: a piece that runs along all of the edge is analytic, a cut
piece keeps the mesh's sampled accuracy; its ends may stop within the
stretches' join tolerance of the edge's own, as the merge leaves them.
planar_edges is asked once per shared mesh and placement turn, for the
curved edges only; a part placed again the same way takes the arcs
shifted on the view's plane.
compile fix by the personal PC
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a view's visible lines as a paper scene group (#5866, W07 V7a)
The paper scene gains a kind for views (ObjectKind::View, layer VIEW).
drawing_view::paper_group turns a view's lines into its group: each
visible piece one stroke, 0.5 mm wide until D2 sets widths by kind of
line, closed when it ends where it starts; a line with no length is left
out and an arc too short to sweep is its chord. W14 calls it for saved
views.
drawing.view.snapshot takes scene: true and replies with the lines as a
paper scene of its sheet, checked by Scene::validate before it is
returned. Hidden lines need dashed strokes (A5, #7430), so scene with
visible_hidden is refused until V7b.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a view draws the occurrences its source names and hide leaves out (#5866, W07 V4)
drawing.view.snapshot takes source: {occurrences: [[ids]]}, the occurrence
subtrees it draws ([] the design's own bodies; every body when not given),
and hide: [[ids]], subtrees left out. A body is drawn when its path is under
a source path and under no hide path, so a hidden path wins over a source
path above it. The rule is one filter on the shown set (ShownSet::keep), so
the extents, the lines and the paper scene follow it; each body costs one
look-up per head of its path, at most 64.
Each path is checked by Session::occurrence_placement as it is (each id in
its parent, no id twice, 1 to 64 ids), with at most 1000 paths in each list
and 4096 ids in all. [] in hide and a choice that leaves nothing are
refused. M2's occurrence tree will make the check one step per id later,
inside occurrence_placement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a bend seen end on draws its arcs once at any angle (#5866, W07 V4b)
A triangle whose surface is seen edge on at each of its corners (the mesh's own normals, at most
1e-3 toward the view) now faces away, whatever lean its facet has. A thin triangle's facet leans by
the mesh's chord error over its own width, which can be far past the 1e-3 a facet may lean and
still count as edge on. Seen end on, a 90° bend's surface is meshed with its edges' samples at its
ends and its rows at even angles inside, 1.667 mm in; the triangles that join the two lean 1.1e-3
to 5.8e-3, so each one facing the view among its neighbours facing away drew silhouettes along its
sides: chords beside the arcs, 1.14 times the inner arc and 1.69 times the outer. The view DXF
takes the rule too.
The export meshes keep their normals for it: 24 bytes a vertex, a position's size again, counted
in the export's 512 MB mesh budget, so the largest view that budget takes is about 30%
smaller. A mesh without normals keeps its facets' facing.
Tests: the bend test takes a 90° bend beside the 60° one; each bend circle's lines add up to its
arc, less only what sampling takes off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* cell: rules both kinds of table share (#3874)
Sheet tables (parts lists first) use the title blocks' cell content, so
the rules both read live in cell.rs:
- Source::Row: the row of a sheet table a cell is on. A title block has
no rows, so its validation refuses a cell that reads one.
- Warning::Width: a word wider than its value box, shown whole, never
cut: the width warning that measured text brings.
- is_snake_case moves here from title_block.rs: table columns are named
by the same rule as cells. check_text is shared the same way.
Tests: a title block cell reading a row is refused, beside other parts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 640cc3e0f5)
* Sheet tables: the parts-list table model and layout (#3874, P7a)
A Table is a sheet table's definition: its columns, the side its heading
is on (top, or at the bottom with the first row just above it, ISO
7573), its row height (7 mm by default), text height, line widths, a
filter and overrides. A column's cells are the title blocks' cell
content read against each row: row fields and text. Rows are input, in
their listed order, with their values worked out and formatted, so a
filter (parts, assemblies, purchased, text per column ignoring case)
hides rows and never changes a count or a quantity.
Table::layout places it with a text measurer, from the right end of the
heading's outer edge:
- a column without a set width is as wide as its widest line, padding and
line insets added; a set width is kept;
- every cell in a set-width column breaks between words to fit, and its
row grows to hold its lines, 10/7 cap heights apart (ISO 3098-0); a
word wider than its column is shown whole with Warning::Width;
- a row field the row doesn't have shows "-"; an override shows its text
and keeps the value it replaces, an empty one is a blank cell, and one
for a row that has gone is kept;
- cells sit inside their lines as a title block's do.
Limits, refused and never truncated: 10,000 rows and overrides, 64
columns, 1 MiB of text in all (each cell's text counted before it is
built), 256-byte keys, a measured width that isn't finite and at least
0, a table off the paper's coordinates.
Nothing is saved or drawn yet: the real measurer, DXF and CSV output and
the command come with P7b.
Tests: hand-worked cell corners and text anchors with a fixed-width
measurer, the heading at the top and at the bottom; wrapping and the
row it grows; a word too wide; overrides, blanks, "-"; each filter
leaving every shown value as given; JSON round trip, defaults and
unknown fields; every limit and one past it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 0c5180267d)
* Revision record and table (#3874, W31, P14a)
A drawing's revisions as data (geom::revision): one RevisionRecord for
the whole drawing, or per sheet with each sheet numbered apart.
- A row holds what people type: revision, description, designer,
checker and date. Adding a row fills in only the next revision;
nothing fills in a date, a checker or an approval.
- Numbers run from 1, or 0; letters run A to Y without I, O, Q, S, X
and Z, then AA, AB. The next revision follows the highest in its scope
among the rows and the issued history, so an issued revision is never
given out again. A typed revision is kept as typed; in letters one
with a skipped letter is accepted with a SkippedLetter warning.
- Rows are added, hidden and deleted; issue() appends a copy of a row to
the issued history, which nothing removes or changes (private, read
through issued()). Row and tag ids come from the caller (the
design's random ids), never from a counter, so two people adding rows
never take the same id; an id in use is refused.
- Triangular tags bind to a row id and show its revision or their own
text; deleting a row reports its tags, which keep the revision they
showed, marked lost.
- The revision table is the sheet table (table()): Revision,
Description, Designer, Checker, Date, heading at the top; hidden rows
are left out. The table's rows and a title block's revision fields
(newest(), hidden rows included) read RevisionRow::field, one path.
This is the drawing's revision only: the model's revision and the
export time are kept apart. Release, approval and frozen snapshots
(G16/G22) are not in this slice. Nothing is placed or saved on a sheet
yet (W12, W15).
Tests: numbering both ways with the skips and past Y and YY, typed
revisions and the warning, the next after issued and deleted rows, per
sheet; add fills in nothing else; history kept through hide and
delete; tags reported and lost; the title block's fields and the table
rows from one function, laid out by the sheet table; JSON round trip,
unknown fields and damaged records refused; the caps; an id in use refused.
- An issued copy keeps the model version it was issued against
(model_version, given to issue(); none until version control gives
versions, #2869), so the release step has its field here. It is read
by the label rule, like the revision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit fa7849ada7)
* Drawing revisions: rows added, edited, deleted and listed by command (#3874, W31)
A drawing saves one revision record for all its sheets (Drawing::revisions, behind an Arc as the
sheets are, so an undo step shares it; validated with the drawing; its ids among the drawing's ids
in use), in the order its rows were added, the newest last. Pending drawing format: revisions.
- drawing.revision.add {set?}: a row with the next revision, after the highest the drawing has
given, and any texts given: one undo step.
- drawing.revision.edit {row, set: {revision?, description?, designer?, checker?, date?,
hidden?}}: the texts as typed (a revision is one line) and what changed; a revision in letters
with a letter the lettering skips is kept and warned about.
- drawing.revision.delete {row}: the row, and the tags it leaves showing the revision they had.
- drawing.revision.list: every row, the oldest first, and the revision a new row gets.
An id's text form (13 characters of lowercase Crockford base32) moves down to solidcraft_geom::ids,
with an option helper, so the revision record (geom) writes its row and tag ids as every drawing id
is written; solidcraft_doc::ids gives them on, beside IdSource.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing revisions: listed by drawing.inspect, a table row keyed by its id's text, and a record per sheet tested (#3874, W31)
The rows show in drawing.inspect beside the sheets, as `revisions: {rows, next}`, from the same
function the revision commands answer with; drawing.revision.list goes, so a drawing's rows have one
place to be read. A revision table's row is keyed by its id as a file writes it, the one spelling
every drawing id has (a table's cell overrides name a row by its key). A record kept per sheet whose
rows keep its own rules is refused by the drawing, so that rule has a test of its own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing balloons: the record, its rules and the sheet hooks (#3874)
A balloon points at a part placed in its view's model by an edge of it, saved
by name as a dimension's edge is (ModelEdge), with the occurrence path as the
part it numbers, and sits at a place on paper from its view's centre. The
dimension module's reference checks and strict lookup are shared, not copied.
Balloons go with their sheet, list in on_sheet and take ids from the drawing.
One pending drawing format file; a drawing without balloons saves as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing balloons: add, edit and inspect, with their schemas (#3874)
drawing.balloon.add puts a balloon on a saved view, pointing at a placed part
by an edge picked as a dimension's is and saved by name; edit moves it on
paper; inspect says where it stands with the model now, with the arrow's
point on its edge's middle. Add and edit are one undo step each, and none of
them evaluates the model. The status words come from one function shared with
the dimension commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing balloons: a copied view takes its balloons, and views and sheets list them (#3874)
A view's balloons are part of what it shows, so copying a view copies them,
with ids of their own, as its dimensions are copied. drawing.view.inspect
lists a view's balloons, and deleting a sheet names the balloons on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- c8adedaec Brett Lawson: smlib: solidcore's new fixes are on (taper tangent corner planes, holed revolve void, loose tangent edges refused, scaled extrusion origin zero, booleans skip faces apart)
- 744f7574d Brett Lawson: smlib: drafted extrudes keep their corners and curve sweeps keep the profile where it lies on solidcore (solidcore#1449, #1450)
- dafb25b4b Brett Lawson: smlib: the body check reads a Caller body's recorded keys on solidcore (solidcore#1584)
- 2ad118666 Brett Lawson: smlib: curvature-continuous rounds and corners left open on solidcore (solidcore#1438, #1439)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- a69016f21 Brett Lawson: solidcore: move the pin to e4379b45 (main, with solidcore#1573: the #1024 rail-through-boundary-vertex test, plus the CreateCurveApproxPoints and PolyBrepCopy ports)
- 2308fa5be Brett Lawson: solidcore: move the pin to ddfb3895 (main, with solidcore#1569 and #1533: the 3x2 mixed corner at a concave unfilleted edge, and SmSurface::ApproximateSurface)
- f23aa76d3 Brett Lawson: smlib: an offset or other non-NURBS face surface exports through ApproximateSurface on solidcore (solidcore#1441), and the new fixes are on
- d4cec2ca9 Brett Lawson: solidcore: move the pin to b2450cbf (main, with solidcore#1568, #1579, #1581, #1585, #1597, #1604, #1600: attributes through booleans, taper corner rules, the curve sweep, check_brep naming, fillet thirds and corner marks, WR-302)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Drawings saved inside the design's file, in both forms (#3890)
K3b of the drawing storage plan, after #7098: a drawing lives in the file of the design it draws
(bherbruck's proposal, Cameron's choice), so the separate drawing file goes.
- `Document.drawings`: the design's drawings, each its own record of the drawing family
(`solidcraft-drawing/N`), each behind its own `Arc`. Every reader and writer of a design now
carries them: save, Save As, autosave and recovery, crash copies, the CLI.
- A design container keeps each drawing in its own entry, `drawings/<id>.json` (Deflate), beside
`document.json`, which holds nothing of them: its bytes, and the model cache keyed to them, are
the same with drawings or without. A plain JSON design keeps them inline under `drawings`.
- Each drawing is read by its own family's rules, taken out of the design's JSON before the design's
own checks. One a build can't read (a newer number, a change it doesn't know, damage) refuses the
whole design, never dropped. So does an entry under `drawings/` that isn't a drawing's, one whose
record has another id, drawings inline in a container's `document.json`, two drawings with one
id, or more than 1,000 (counted before any is read). A design is never saved with two drawings of
one id.
- Drawings are listed by name, then id: no stored order, nothing to merge when two people add
drawings.
- A drawing has an `id`, unique among its design's drawings (`Drawing::new` takes the ids already
taken). Its source is the design it is in: at most one, an id and no path.
- One pending design change, `drawings`: the last release refuses a design saved with it, so it
never opens one and saves it without its drawings. One pending drawing change, `in-design`, for
the record's new shape.
- Gone: `read_drawing`, `read_drawing_file`, `write_drawing_container`, `file_kind`, `FileKind`,
`DRAWING_EXT` and `is_drawing_path`. `read_document`, `read_design` and the container writer are
as they were before #7098, with the drawings added.
Tests: a design's drawings round-trip through both forms byte for byte, with `document.json` and
`container.json` the same with drawings or without; their order; every refusal above; a drawing's
properties kept as other tools wrote them while a sheet's number out of range is refused; the
drawing's id among its objects', a new drawing's id none of the design's; a design with two
drawings of one id not saved; mutation fuzz of a design with drawings in both forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing commands on the design's own drawings, each drawing its own undo (#3890)
K4' of the drawing storage plan, on K3b (a drawing lives in its design's file): make, list, open,
close and delete a design's drawings, and read and change the open one's settings and properties.
It replaces #3891's drawing sessions, which held a drawing as a file of its own.
- `drawing.create {name?, language?, units?}` adds a drawing of the design (one ISO A3 landscape
sheet with the ISO border, the design its one source) and opens it; refused on an empty design.
`drawing.list`, `drawing.open {drawing}`, `drawing.close`, `drawing.delete {drawing}`.
`drawing.inspect`, `drawing.set`, `drawing.properties`, `.properties.set`, `.properties.remove`
work on the open drawing. Labels in en, ja and zh.
- The open drawing is the session's (`Session::open_drawing`, kept in checkpoints), and the part
gate keeps the parts apart: a command says the part it works on, the model unless it says
otherwise (`.in_drawing()`, `.any_part()`). While a drawing is open the model's commands wait
("a drawing is open: close it to change the model"); the drawing's run only while one is.
Files, recovery, undo and redo, checkpoints, selection, diagnostics, the command list and
choosing a drawing work either way. `CommandSpec::allowed` is the one check running a command,
running it inside another and listing it make.
- `Session::drawing` and `Session::edit_drawing` are the open drawing's one way in: an edit is kept
when it changed something and still keeps the record's rules, in a new design whose other
drawings are shared.
- A change that only touches drawings evaluates nothing: `Document::differs_only_in_drawings`
joins the render-only path, as render settings and part properties do. A model edit shares
every drawing, so it pays nothing for the check.
- Undo per part: a step records the part it changed (`Snapshot::part`: a drawing, or the model
and its list of drawings). Undo and redo go through the open part's steps only. A drawing's
step puts back only that drawing; the model's step puts back the design as it was, keeping each
drawing it had as it is now. Making and deleting a drawing are the model's steps. A new step
ends what could be redone in its own part only. `Snapshot::of` is the one place a step is
taken.
- An agent's message that changed several parts keeps their steps apart, rather than merging them
into one step that would undo only one part.
- `cmd::metadata`'s rules for reading, setting and removing properties are written once
(`reading`, `setting`, `removing`) and used by the design's and the drawing's commands.
- `drawing::sort` is the one place the drawings' order (by name, then id) is kept;
`Document::put_drawing` adds or replaces one in that order.
Tests: making, listing, opening, closing and deleting; what making one refuses, at the cap too; the
gate both ways, inside another command and in the command list; drawing edits as undo steps that
evaluate nothing over 100 rounds; undo and redo per part with model and drawing steps interleaved;
redo ended per part; the order by name, then id, after renames; delete and its undo; refused
changes; checkpoints; save and open in both forms; properties; hostile values for every command
that runs with a drawing open, from the registry; a fuzz of the steps in any order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Unknown-command tests: the closest id first (#3890)
drawing.open now joins doc.open in the suggestion for `file.open`, as the rule says: both end in
the same word. The engine's and the CLI's tests check that doc.open comes first and let other
close ids follow, as the `solid.extrud` line beside them already does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model bodies: their extents seen on a plane, for a drawing view's size (#5866)
ModelBody::mesh_bounds_in(plane) is the box of a body's mesh in a plane's own coordinates
(Plane::to_local), beside mesh_bounds and in the same way: a body meshed already is measured from
its own mesh, and a placement of a part from its definition's shared mesh, with the placement
folded into the plane's two axes once (two dot products a point), so no moved copy is made. W07's drawing.view measures a view's extents with it.
Tests: a 100 x 50 x 20 block seen on the three principal pairs of axes and from an isometric
corner (150/sqrt(2) by 190/sqrt(6), worked by hand), a plane away from the origin, and every
placement in the shared-mesh test against its moved mesh, still without a moved copy, and the
same again from its own mesh once it is meshed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: projected views in first or third angle, lined up with their parent (#4816, W17a)
W17a's second slice: the principal views derived from a base view.
- `ProjectedSide` (left, right, above, below): the side of its parent a
projected view sits on.
- `projected_basis(parent, side, projection)`: in third angle a view shows
the side of the model it sits on (one to the right looks from the right), in
first angle the side away from it (ISO 5456-2). It's the parent's basis
turned a quarter turn about one of its paper axes, through its origin, with
no -0. From the front view it gives exactly the named views: right, left, top
and bottom in third angle; left, right, bottom and top in first.
- `ViewFrame::aligned(side, projection, centre, position_mm)`: a projected
view at its parent's scale, lined up with it, so it moves only along the free
axis.
- The projection is S2's `cell::Projection`, the value the title block's
symbol reads, so a drawing has one first-or-third setting.
Tests: the front view's projections are the named views in both angles, with
no -0; from every named view and a leaning one, a projected view looks from
its side and keeps the parent's other axis and origin, four turns or a turn
and its opposite bring the parent back; a box's corners line up across
aligned views in both angles; hostile parents, centres and positions refused.
Corner (isometric) projected views wait for one convention check on first
angle. The derivation graph (projected from, aligned to, cycles refused) moves
to the view record in the drawing file, where the view ids live.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: measurement on view frames (#4896, W19a)
`geom::drawing_measure` is what a dimension on a view reads, in model mm or radians, from model
points and edges and the view's basis: one rule for every dimension. The view's scale and place
on the sheet never enter.
- `linear`: horizontal and vertical along the view's paper x and y, aligned as the view shows
the segment, or along a direction picked on the view; a true reading is the segment's own
length (aligned only).
- `angle`: from the view's horizontal or vertical, a model axis as the view shows it, or
another edge, from 0 to π as each line is oriented; a true reading is between model lines.
- `foreshortened` says a measured line isn't parallel to the view's plane.
- Refused with a reason: points that aren't finite or are past 1e12 mm, an invalid basis, a
zero-length segment, a line seen end-on, a zero direction, a zero reading, parallel lines,
and a true reading where there is none. `drawing_view`'s `PARALLEL` and `require` are shared.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* drawing.view.snapshot: a view's scale, place and boundary on its sheet (#5866, W07 V2)
The first slice of W07: one orthographic view of the design, worked out and returned as data,
before any line is drawn, so scripts can lay views out by their boundaries.
- `drawing.view.snapshot` takes the view's settings, the sheet it goes on (A3 landscape at
300 dpi when not given) and where its centre goes (the sheet's centre when not given). With no
scale it takes the largest ISO 5455 scale at which the view, centred there, lies inside the
sheet's drawing border. It returns the resolved view, the scale (and whether it was fitted),
the extents on the view's plane, the boundary on the sheet and what it was drawn from.
Read-only and not undoable; it opens nothing and saves nothing.
- Every body the design places is in the view, wherever its occurrences place it; the browser's
eye counts for nothing (`engine::drawing_view::extents`, from P2's `mesh_bounds_in`). A design
whose assembly walk stops at its limits (deeper than 64 levels, or past 100,000 placements) is
refused rather than drawn with parts left out: `Document::placements_complete`, beside the walk,
says whether every placement it holds had its occurrences walked.
- `doc::drawing_view::ViewSettings` is the view's one parameter set: the view (named, or a
direction and an up), the scale, the two visual styles, the reference settings and tangent
edges. A saved view (W12) keeps the same fields; no scale is written as none, not null, so
what it writes reads back as the snapshot's parameters.
- `render::VisualStyle` names the five styles: visible, visible_hidden, shaded, shaded_visible
and shaded_visible_hidden. The shaded ones are refused as not supported yet until the drawing
renderer (#5624).
- The command has a typed contract (input and output schemas). Its handler reads the contract's
own type through `schema::read`, in the contract check's own words, so the check's levels give
one message for one mistake and an unknown field is refused by name. The reply includes the
sheet, its defaults filled in.
Tests: the 100 x 50 x 20 block's boundary in the front, top, right and isometric views at 1:2,
worked by hand; the fitted scale on A3 and A4 and near the border; scale, position and margin;
the browser's eye ignored; the design untouched; each hostile setting refused; the walk's
depth limit one level either side; the contract's keys the same as the settings' own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views in the drawing record: base and projected views, and the projection (#4816)
E4 of the view-boundary plan, with #4816's derivation graph (plan on #4816).
A drawing now saves its views, as one pending drawing-format change
(`drawing/format/pending/sheet-views.rs`):
- `Drawing.views`: each view an object of the drawing, on one of its sheets.
A base view draws a source from a direction (`ViewDirection`, as
`drawing.view.snapshot` takes it); a projected view sits on one side of its
parent. Its place is a point of the sheet, or, lined up with its parent, only
how far along the free axis, as the other comes from the parent. A projected
view's source and basis come from its chain, so neither is saved.
- `ViewOverrides` beside V2's settings: what a view sets itself, each setting
on its own (scale, display style, reference style, reference parts hide the
model, tangent edges); none is written when left out. Each view has its own
reference margin.
- `Drawing.projection`: first or third angle (S2's `cell::Projection`). Third
angle is the type's own default (Cameron, 2026-10-26), for a drawing that
doesn't say and for a new one until a template or a preference chooses.
- The rules, checked on reading and after every edit: a view is on one of the
drawing's sheets; a base view draws one of its sources, has a scale and a
direction that makes a view; every parent is a view, no chain of parents
loops, and a chain is at most 32 views; a lined-up view is on its parent's
sheet; a place is on paper; at most 4,096 views. A view's id is the
drawing's, never another object's.
- `Drawing::resolve_view`: one rule for every reader. It turns the base view's
basis down the chain (`projected_basis`, in the drawing's projection) and
takes each setting from the nearest view that sets it, then the default,
saying who gave it.
- geom's `is_paper_coordinate`: the one rule for a view's place on paper, now
used by `ViewFrame::new` and the record.
The record tests' seed drawing has views, so its round trip and mutation tests
cover them; their unknown-field examples no longer use `views`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: one temporary folder helper and the schema check for every test module (#4816)
The view tests use the drawing tests' temporary folder and the schema tests' `conforms`, which were
private to their modules. `Folder` moves to the engine's test module and `conforms` is open to the
crate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: inspect and edit a saved view (#4816, W17c)
E5 of the view-boundary plan (plan on #4816): what the view's window reads and
writes, for the views of a drawing (E4). Both are drawing commands with
input and output schemas, and neither evaluates a model.
- `drawing.view.inspect {view}`: its kind (base or projected), sheet, source,
parent and side, its direction as resolved (named only when it is exactly a
named view), its place, and each setting as {value, from, parent?, set}:
where the value comes from (the view, a parent by id, the default) and what
the view saves itself. A projected view says whether its display settings
follow its parent (`linked`: true, false or "partly"). `choices` gives the
display styles and the preset scales, so a window keeps no list of its own.
- `drawing.view.edit {view, set}`: one undo step. Each setting takes a value,
or null to follow the parent (a base view keeps a scale); the margin, a base
view's direction and the place change too. `linked: false` saves the display
settings at the values they have, `linked: true` clears them so they follow.
The reply names the fields changed and the views projected from it whose
settings changed with it. The record's rules hold after every edit; an edit
that changes nothing is no step.
The contract test keeps the edit's fields and the record's (ViewOverrides) one
list. The view's boundary comes with the next slice, which works out where each
saved view sits on its sheet from its design's extents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: where a saved view sits on its sheet (#4816)
`Drawing::view_centre` gives a view's centre on its sheet: its point, or, lined up with its
parent, its own place along the free axis and the parent's centre across it. The free axis is
one rule on `ProjectedSide` (`along`, `on_free_axis`), which `ViewFrame::aligned` uses too.
`engine::drawing_view::on_sheet` puts a saved view on its sheet: its design's extents on its
plane, grown by its reference margin, at its scale, round its centre. The snapshot and saved
views share `measure` (refusing an assembly past the walk's limit or one with no bodies) and
`boundary`. With nothing to measure (the design has no bodies or places more than a view walks) a
view gets a 20 x 20 mm placeholder round its centre. A view's source is the design the drawing
is in, so the session's own model is what it measures.
`drawing.view.inspect` adds `boundary_mm` and `extents` (status `placeholder` and why, when there
is nothing to measure). It still evaluates no model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Projection of new drawings: a preference, and drawing.set takes the projection (#4816)
A drawing's views follow its projection, first or third angle (third when nothing chooses).
`drawing.inspect` now shows it and `drawing.set {projection}` changes it as one undo step.
Preferences > Design gets a Drawings section with "Projection of new drawings"
(First angle / Third angle). A new drawing takes it as a new design takes "Units of new
designs": the app sets it after `drawing.create`, with no undo step of its own. A saved
value this version doesn't know reads as third angle; asked for over the control channel,
it is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: one edit, one lookup, a border that lays out, and schemas (#3875)
The sheet commands change the drawing through `Session::edit_drawing`, so the same settings or
order again leave no undo step, and answer from one reply type. A sheet is looked up by id or
name on `Drawing` (`sheet_index`), where later commands that name sheets find it too.
A sheet's border must lay out on it: the record's check runs the border's own layout, the one
rule drawing uses, so a 15 x 15 mm sheet with the ISO border is refused when it is made, not
when it is drawn. `excluded` must be an object of `count` and `print`: a mistyped key changed
nothing unseen. A new sheet documents nothing and leaves nothing out unless told, and the add's
parameter documentation says it takes `documents` and `excluded` too.
The drawing's properties sit behind an `Arc`, as its sheets do, so an undo step shares them.
Each sheet command has an input and an output schema (#4035). A flattened part of a contract
reports its keys as the parent's own (`schema::flattened`, which `FeatureCommon` now uses).
The tests add the missing cases: 1000 sheets and the 1001st, `after` by id and unknown, the
resolution's bounds, a name two sheets share, the same order and settings again, an undone
delete in place, and the add's reset of what it documents and leaves out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing ids: one id source per session, its seed kept for replays (#3890)
The drawing commands drew ids from a fresh random source each time, so a crash replay of a drawing
could never find what an earlier command made by its id. A session now has one id source
(`Session::ids`), kept across a file change, from which `drawing.create` draws its drawing's,
sheet's and source's ids: seeded alike and run alike, a session gives the same ids, and a failed
command draws none, so a replay of what succeeded draws the same. The crash journal keeps the seed
at each base and `replay.json` carries it, which `solidcraft-cli crashes replay` seeds the replay
with (`Session::seed_ids`).
Tests: two sessions seeded alike make a drawing with the same ids, another seed other ids.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: add, change, reorder and delete a drawing's sheets (#3875)
W18 S4: the sheets of a drawing, on the drawing session K4 made (#3890). Each command is one undo
step of the drawing and names a sheet by its id or, when only one has it, its name.
- `drawing.sheet.add {after?, name?, size?, orientation?, dpi?}`: a new sheet after the one named
(the last when not), taking that sheet's paper, border and resolution, with a name of its own
("Sheet 2") and nothing documented yet.
- `drawing.sheet.set {sheet, name?, size?, orientation?, dpi?, documents?, excluded?}`: one
setting at a time, the rest kept; `documents: null` clears what it documents, and `excluded`
changes only the flags it gives.
- `drawing.sheet.reorder {sheets}`: every sheet's id once, in the new order.
- `drawing.sheet.delete {sheet}`: a drawing keeps at least one sheet.
- Every change goes through the drawing's own rules (`Drawing::validate`), so what a saved file
would refuse is refused here. Changing a sheet's paper changes only the paper: regrowing its
border and moving what is on it is S5's. Labels in en, ja and zh.
Tests: a new sheet copying the paper it follows, after a named sheet too, and undone; each setting
changed with the others kept; nine refusals (resolution, sizes, orientation, name, an unknown
source, a flag, an unknown sheet, no sheet named) with the drawing unchanged; reordering, and four
orders that aren't every id once; a name two sheets share refused in favour of the id; the last
sheet kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a new sheet's id from the session's id source (#3875)
`drawing.sheet.add` draws its id from `Session::ids` (#3890's one id source per session), so a
crash replay of "add a sheet, then change it by id" finds the sheet: seeded alike and run alike, a
session adds sheets with the same ids, and a failed add draws none.
Tests: two sessions seeded alike add the same sheet ids, another seed others, a failed add none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: move or copy a view to a sheet (#4816)
`drawing.view.move_to_sheet {view, sheet, position_mm?, break_alignment?}` puts a saved view on
another sheet as one undo step, keeping its id, direction, source and settings. The views lined
up with it go with it and keep their places beside it; a view placed apart stays. Without a
position it keeps its place. A view lined up with its parent moves only with `break_alignment`,
and is then placed apart: at the position, else the sheet's centre. Its own sheet changes
nothing.
`drawing.view.copy_to_sheet {view, sheet, position_mm?, with_linked?}` makes new views, each
following none of the views it was copied from (Cameron's rule). A view with views lined up
with it needs `with_linked`: true copies them too, lined up with the copy; false copies it
alone. A projected view copied alone becomes a base view, looking the way it did (by name when
it is exactly a named view) with the settings it had as its own. The copy goes to the position,
else the sheet's centre.
A lined-up view's centre comes from the places alone: its place along the free axis, and its
parent's centre across it. So the views that travel with a view are shifted along their free
axis, and nothing needs the design's extents. `descendants` takes which views it follows, so the
edit's followers and the views lined up with a view are one walk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: move and copy take a view's centre from the record (#4816)
Moving or copying a view to a sheet worked out a view's centre with its own copy of the
lined-up rule. It now uses `Drawing::view_centre`, and a lined-up view's place moves along
its free axis by `ProjectedSide::along`, so the rule is written once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a change of paper lists the views it leaves outside, and moves none (#3875)
W18 S5, its first part. `Sheet::drawing_space` is where a sheet's drawing goes: inside its
drawing border, or the whole paper with none. Nothing on a sheet is saved against the border,
so a change of paper regrows the border and its zones by itself.
`engine::drawing_view::outside` lists the views whose boundary (`on_sheet`) leaves their sheet's
drawing space, sides included. `drawing.sheet.set` lists them after a change of paper (size or
orientation; nothing else moves the space, so nothing else is measured), and moving or copying a
view to a sheet lists those it puts outside there. None is moved: where a view goes stays the
author's choice. A view with nothing to measure is listed by its placeholder, with why.
Tests: the drawing space with the ISO border, a filing margin and no border, and margins that
leave none; A3 to A4 either way up listing the right and top views with their boundaries and
moving nothing; a border through a view's edge leaving it inside, 0.1 mm less paper putting it
outside; a change of name checking nothing; undo; a move to a smaller sheet listed and a copy
that fits not; a placeholder listed as `past_walk_limit`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing ids and the sheet border: the tests the slices left out (#3890, #4816, #3875)
What the slices' planted faults found untested, now each caught by a test:
- a file change keeps the session's id source: a drawing made after `file.new` draws the same ids
in two sessions seeded alike;
- a copied view's ids come from the session's id source, seeded alike giving the same copies;
- a crash report's replay carries the session's id seed, from a caught panic (the seed when the
command started) and from the journal of an unclean exit (the seed at its base);
- a view short of the sheet's border by less than a rounding is still inside it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: listed by id, whatever order they were added in (#4816)
The record's rule says a drawing saves its later records by id, never in
the order they were added in. Views were kept, and saved, in the order they
were added, so the same views added in another order saved as other bytes.
- `Drawing::add_views` adds views where their ids put them. It is the one way
views are added: `drawing.view.copy` uses it, and so do the test fixtures.
- `Drawing::validate` checks the order, so every edit keeps it.
- Reading puts a file's views in id order before it checks the record. The
order means nothing, so a file in another order (saved before views went by
id, or edited by hand) isn't damaged: it opens, and saves by id.
- What a command lists in the drawing's order (the views a change of paper
leaves outside, an edit's followers) now comes by id.
No format change: no release has saved a view (the views change is still
pending).
Tests:
- views added out of id order are listed and saved by id;
- the same views added the other way round make the same drawing and the same
bytes, which read back as saved;
- a file that lists them the other way round reads by id, as the same
drawing, and saves as those bytes;
- an edit that leaves them in another order breaks the record's rule;
- the existing tests now index the file by id order, and the engine's lists
are by id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: the dimension record, saved by name on a view (#4896, W19b)
A drawing saves its dimensions: each on one of its views, measuring named
corners or edges of the view's model (a linear distance between two corners,
a straight edge's length, or the angle between two edges), with the direction
and reading W19a measures with, how far its line sits from what it measures,
where its text sits on paper, its decimals and any text shown instead of the
number. A reference names its body, the feature that made the body and its
occurrence path, never a picked point. Nothing worked out is saved.
- Dimensions are listed by id, read in that order whatever order a file has,
as views are: one helper pair (add_by_id, in_id_order) now keeps both lists.
- One cap for the names a saved model reference keeps
(MAX_REFERENCE_NAME_BYTES, used where 512 was written three times), and the
corner's edge cap shared with construct's vertex references.
- LinearDirection and Reading save as snake_case words; a direction along a
line saves as its two coordinates.
- A direction along a line is at most 1e9 each way (format::MAX_REAL, the
limit the file's number check holds every real number to): a whole number
past it passes that check, reads as a real, and would save as one the next
read refuses (found by the mutation test).
- One pending drawing-format file (dimensions.rs).
Tests: what each dimension saves and reads back as the same bytes, a file in
another order reads by id, an older drawing has none; every rule on both sides
of its cap, unknown fields at every level, the id rule, and the count cap; the
plate fixture carries one dimension of each kind, so the existing round-trip
and mutation tests cover them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edges and corners by name: the matching step and the shared ends, each in one place (#4896, W19b)
A dimension finds an edge by name the way a fillet does, but never takes
the piece nearest an old pick, and finds a corner where its named edges
meet, refusing to choose between two. Both steps are split out of the code
that already does them, so there is one rule each:
- BodyEdges: a body's edge and face names, worked out once for every name
looked up on it, and `matching(name)`: the edge with that name, else the
one edge between the faces it names, else the pieces of it. locate_edge
now calls it and then takes the piece nearest the pick, as before.
- construct::shared_ends: the ends every named edge has, each once.
named_vertex keeps the one nearest its point, as before.
No behaviour change: every caller of locate_edge, find_edge and the vertex
references gets the same results. The existing naming, joint and
construction tests cover both paths; three new ones pin what they left
open: a vertex only where every named edge ends, the piece of a split
edge nearest the pick, and a lone match through the stem of a face taken
as a piece, with the warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A body's frame through an occurrence path, in one place (#4896, W19b)
Document::body_frame_at(body, path): the placement the path leads to,
then the body's offset, without expanding every assembly instance. It is
what EmbossFace::body_frame composed for its saved path; that now calls
it, and drawing dimensions use it for the occurrence path they save. No
behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions found again in the model, strictly (#4896, W19b)
Document::resolve_dimensions(model, drawing, ids) works out each dimension
as the model has it now:
- An edge by its name, or the one edge between the faces it names
(BodyEdges::matching), never the piece nearest an old pick. A corner is
the one end all its named edges, or their pieces, share; two shared ends
are ambiguous, never "the nearer one".
- The body by its name and the feature that made it, placed through the
saved occurrence path (Document::body_frame_at). A same-named body made
by another feature isn't it.
- Status: ok; overridden (the text given is shown, the value still worked
out); ambiguous (the candidates, at most 16, none chosen); suppressed (its
feature is suppressed or rolled back, read from the evaluation's own
skipped mark); lost (why); unmeasurable (found, but the view can't
measure it so, in W19a's words, such as a line seen end-on).
- The value comes from W19a on the view's basis. An angle is the smaller one
between the two lines, or pi minus it on its other side, whichever way the
kernel runs the edges; a split edge's pieces on one line are still that
line. A split edge's length is ambiguous.
- The text: the override, else length_number in the drawing's unit (or the
design's) with the dimension's decimals, or degrees for an angle.
- The cost: each body named is looked up once per call, and its edge names
worked out once, however many dimensions name it. A body none names isn't
touched.
Not saved: nothing here changes the drawing. The last good value of a lost
dimension needs the session, so it comes with the commands (W19d).
Tests (engine, an 80 x 40 x 30 box, values by hand): front and right view
values, foreshortening and text, the drawing's own unit, several at once
and an unknown id; a change and its undo; a chamfer's 45 and 135 degrees,
and end-on in the front view; lost after a fillet and back on undo,
suppressed and back, a path to no occurrence, a new box with the same body
name; a notched edge's length ambiguous with both pieces while its end
corners still read 80 and its angle to the left edge 90 degrees, neither
exact; an angle on a piece of an edge whose slot is then suppressed still
reads 90 degrees, found through the stem of the face it was cut from, so
not exact; one edge named twice gives two corner candidates;
an override shown while the value follows the model.
Not covered by a test here: a part placed twice through real occurrences
(only a path to no occurrence is); the once-per-body cost (not measured).
A drawing unit outside display_units' five (um, yd, km, mil, nm, inch, µm)
shows millimetre numbers, the formatter's existing fallback; named as its
own follow-up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a sheet with anything on it goes only with it, when asked (#3875)
drawing.sheet.delete refuses a sheet with anything on it, and its
error names what is there: its views and the dimensions in them, the
first few ids of each. With `contents: "delete"` the sheet goes with
everything on it as one undo step, which an undo brings back whole.
What is on a sheet is said once, in the record (Drawing::on_sheet),
and Drawing::remove_sheet takes the sheet out with exactly that; each
later kind of record on a sheet (a sheet's own sketches) adds itself
there, so delete covers it with no change here. drawing.sheet.set's
list of a sheet's views uses the same function.
Nothing on another sheet goes with it: a view there projected from one
of the sheet's views would lose its parent, so the delete is refused
naming those views, to be moved or deleted first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a view found by id by halves, in one place (#4816)
The views are listed by id, so Drawing::view and Drawing::view_index
find one by halves instead of walking the list. Every lookup by id
uses them: a view's chain of parents (so resolving a view no longer
walks the list once for each parent), the views' rules (which no
longer build a map of every view to check each chain), a dimension's
view, and the engine's view commands and outside check.
The rules check the id order before anything looks a view up, so a
file with its views out of order is still refused as before.
Measured on a drawing of 4096 views (1024 chains of a base view and
three views projected one from another), median of 30 runs: 4096
lookups by id took 6.85 ms by a linear find and take 105 us by
halves; the rules' check took 1.77 ms and takes 1.45 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a damaged chain names the view whose parent is missing (#4816)
A view whose chain of parents breaks further up was refused with "its
parent X isn't one of the drawing's views", naming a view that isn't
its parent. Further up the chain, the refusal now names the view whose
parent is missing: "its chain of parents reaches view Y, whose parent
X isn't one of the drawing's views". A missing parent of the view
itself reads as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: add one to a view, and read it back (#4896, W19d)
drawing.dimension.add puts a dimension on a saved view of the open
drawing; drawing.dimension.inspect reads one back with what it
measures now. Adding is one undo step of the drawing; neither
evaluates the model.
What a dimension measures is picked and saved by name, never by the
point picked. Document::edge_reference and corner_reference turn a
pick into the record's names: an edge is a point on it in the design's
frame or {body, index} (its index among the body's edges as the model
lists them, as an ambiguous dimension's candidates are given), and a
corner is a point or the edges that meet there, each with the
occurrence path its body is placed through. A pick that doesn't name
one thing is refused, saying what it found: no edge, a point on
several edges, a corner of more than one body, edges that don't meet.
Each body's edges are placed in the design's frame once per pick, and
only the body picked has its edge names worked out.
The kind is given as the record saves it ({linear: {a, b, direction?,
reading?}}, {length: …}, {angle: …}), read by the record's own types,
so a command and a file read the same words. A new dimension's line is
10 mm from what it measures (until a dimension style gives it), shows
2 decimals, and its text is centred on its line; the text's default
place at its centred point (Q58) comes with the layout on paper.
The inspect reply has the record, the status (ok, overridden,
ambiguous, suppressed, lost or unmeasurable, with why), the value
(model mm, or degrees for an angle), whether it is foreshortened, the
text, whether every name was found by exact history, and an ambiguous
dimension's candidates.
One rule, one place: the corner rule's point tolerance is
construct::point_tolerance, shared by the picks; a dimension by id is
Drawing::dimension, which the resolver uses too.
Not here yet: edit, the view's list of its dimensions, the layout on
paper and the last good value (the next slices); delete waits with
view delete for the drawing UI's choice of one delete command or one
for each kind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: change a dimension's settings (#4896, W19d)
drawing.dimension.edit {dimension, set} changes what a dimension
shows and where, as drawing.view.edit changes a view: the offset of
its line, its text's place, its decimals, the text shown instead of
its number (null shows the number again), and its kind's direction,
reading or other side. The reply names the fields that changed. The
same values again change nothing and add no undo step (the drawing is
put back only when it differs). What a dimension measures isn't a
setting: to measure something else, add a new one.
A setting its kind hasn't got is refused (an angle has no direction,
only an angle has an other side); every changed record passes the
check a file read runs, so an edit can't save what opening the file
would refuse. A dimension's place in the list is
Drawing::dimension_index, which Drawing::dimension now uses too, as a
view's is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: inspect lists a view's dimensions (#4896, W19d)
drawing.view.inspect answers `dimensions`: the ids of the view's
dimensions, in id order, so a caller can find them and read each with
drawing.dimension.inspect.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: a copied view takes copies of its dimensions (#4896, W19d)
drawing.view.copy_to_sheet copies each copied view's dimensions with
it, each with an id of its own on the copy, in the same undo step:
they are part of what the view shows (the W19d plan's question 1, its
recommended answer). A dimension's text placed `at` a point is from its
view's centre, so it keeps its place on the copy. A moved view keeps
its own dimensions as they are: they name the view by id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: the last good value, in memory (#4896, W19d)
A dimension that can't be measured now (its edge filleted away, its
corner gone) gives `last_good`: the value it last read this session,
as `value` gives it (model mm, or degrees for an angle). Each value a
dimension reads is kept by drawing and dimension in the session, and a
scratch copy keeps the session's. It is never saved (the W19b plan's
question 3), so a design's drawings don't change with every model
edit, and after reopening a lost dimension shows no number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: hostile values anywhere in the commands' params (#4896, W19d)
A hostile value in each place of drawing.dimension.add, .edit and
.inspect's parameters, at every depth (the kind, its picks and paths, a
corner's edges, the edit's settings), with 1 000-item lists, the
largest index and 600-byte text besides the engine's shared hostile
values: no panic, and the drawing keeps its rules. The engine's own
hostile test sends only its list of key names, none of which these
commands read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: a new dimension's defaults, tested (#4896, W19d)
The offset (10 mm), the text's place (centred) and the decimals (2) a
dimension is added with when not told.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A plane carried by a transform, in one place
`assembly::map_plane` is public and gives `None` for a transform that flattens the plane; its two
copies (the occurrence mapping, which keeps the plane as it was, and the face anchor's, which
refuses) now call it and keep their own fallback. W20a's radial dimensions use it to carry a
view's plane into a body's frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing dimensions: a circle's or an arc's radius and diameter (#4896, W20a)
A radial dimension saves its edge by name and whether it shows the diameter. It reads the edge's
exact circle in the view's plane through the edge (`Body::planar_edges`, as the view draws it), so
a view that doesn't see the circle face on can't measure it; its text is R or Ø before the number.
`drawing.dimension.add` takes `{radial: {edge, diameter?}}`, a diameter by default for a whole
circle or half a turn or more (a hole's rim is two halves), and refuses a dimension of any kind its
view can't measure; `drawing.dimension.edit` switches `diameter`, keeping the id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf74dcbbe jyviko: Tests: a round wall is one face, its name without a piece number
- 8f914ddd2 jyviko: Tests: the saw cut's halves named after their faces, listed in the kernel's order
- 1a5a3b5eb jyviko: Tests: an extended cylinder strip stays one face in every mode
- a3f150257 jyviko: Tests: the tapered bosses' volume in closed form, not truck's measure
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ec4eebaa8 jyviko: sew: a folded pcurve has no piece shorter than it lifts onto its edge
- 1bc8b204f jyviko: Kernel tests: a circle is one closed arc, a round wall one face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 41206c065 jyviko: Sheet metal: a whole circle in the outline is sewn as its two exact halves
- 374d3b7e8 jyviko: Sheet machining: a depth an ulp off the sheet's face is on it
- 909f9a20e jyviko: Sheet face names: a triangle takes a flat face's name only where that face faces its way
- ff9ccaf1e jyviko: Sheet tests: the DXF outline and the folded volume as the exact flat pattern and measure give them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ae748417 jyviko: Robustness: seed 5's edge-only join keeps two bodies, as joins have since 94ee28d5c
- 48d72ba2b jyviko: Convert Mesh: a triangle of no area is dropped, not refused (#4561)
- a0a75dc78 jyviko: Kernel rig: import/4561 passes, off the known-failing list
- beaed5b35 jyviko: Kernel rig: threads/2369 names the tap maker's 6.8 mm drill for M8
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4ebc3d078 jyviko: UI tests: the thread catalogue's error and Press Pull's hole wall as they are now
- 2debdd87a jyviko: Pi case test: each standoff is four faces, its walls one face each
- db757efc7 jyviko: Tests: the pi case and the hole wall read as on green-truck-era-tests, so both branches agree
- 191c1b855 jyviko: Fair: a net of up to 128 x 128 control points, the band bounding the solver
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8b45f277 jyviko: STEP import: a void reads as a cavity whichever way its shell flag points, again
- 64188ce43 jyviko: Planar regions: a hole goes to the material that holds it, read closer than the hole lies
- 1a0289011 jyviko: Planar region tests: edges on one line are one edge of the result
- 514426e5d jyviko: STEP import: a closed spline a face lies across the start of starts clear of the face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c47c1d26a jyviko: Tests: the fit and taper tests use geometry that still doesn't fit
- 8c37bc756 jyviko: Fillet rig: R10 past the full round is refused naming 7.5 mm, as the case asks
- a100c7c06 jyviko: Loft rails: a station grows about its section's centroid by length, not the mean of its control points
- e5476706b jyviko: Issue 616 test: the lid's volume is its closed form, 6703.5344
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b779364 jyviko: Tests: a point path's sweep has a wall along each line; coplanar walls join at a corner
- d945cf53a jyviko: Fillet and chamfer: a refusal as too large names the largest size that fits
- 8bcd81244 jyviko: Tests: a blend refused as too large is SMLib's NO_ROOM, in its own words
- deaf8e679 jyviko: Tests: convex blends past a cliff are cut from the part, as the owner decided
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b9d0a3308 jyviko: Mesh memo test: SMLib's booleans mesh neither operand
- b6c3bf3c5 jyviko: Face capture test: an Offset Face's top is anchored by its exact history name
- 1ee5f1af3 jyviko: Kernel: a mitred sweep carries a slanted section all the way to each mitre
- 1e4b64402 jyviko: Provenance: a sweep's origins are the ones it recorded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 15c31a96f jyviko: Kernel: planar source lineage finds each face's support through an index, with no budgets
- 049b2bc40 jyviko: Lumps: a face-source table of another length is refused, never sliced
- f60bf96df jyviko: Planar sources test: two bodies side by side joined as the record requires
- e1b762c4b jyviko: Booleans and Shell keep the lines faces were split along on purpose
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ffb1e650d jyviko: Isocurve Analysis: count curves each way, evenly spaced across the face
- 177eb207f jyviko: Exploded views are shown only: the design's placements and Capture Position leave them out
- 8d72cfa59 jyviko: SMLib export: a face's outer area reads only its own loop's edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7e613b6f jyviko: Records: the item budget bounds input, not the kernel's own results (Refs #3992)
- cf2b3a62f jyviko: Fair Surface: a face of degree 1 one way fairs along its curved way, and a face with nothing free is left as it is
- 16d467e14 jyviko: Point and Plane Along Path: exact on the path's curves by arc length, and a t outside 0…1 is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97935eed8 jyviko: Inspect: the centre of mass from the exact faces, as Measure takes it
- d094d43f2 jyviko: Compare Bodies: each region measured exactly, on the cut of the two bodies
- 864bcbccb jyviko: Compare Bodies: a region the exact cut cannot measure has no volume and says why, never an estimate
- a1dbb7c08 jyviko: Kernel rig: the two G2 corner cases are graded clear of the vertices, as the ladder grades them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 80d08659f jyviko: Kernel rig: the booleans, import and threads lists name the 5 cases that fail on the pinned SMLib
- 5c45570c9 jyviko: Kernel rig: rustfmt; measured values in results are decimals, within tolerance; the ladder records 06/023 passing
- 393a9aab6 jyviko: CI: native and reference tests stay on pushes until develop is green
- 322ac2592 jyviko: CI: the release gate still calls ci.yml (workflow_call)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6af622978 jyviko: Threads: a taper thread's groove follows its crest cone across the section, so no sliver of the flanks is left
- 3f5efdf70 jyviko: Kernel rig: one results check, each {step, pointer?, json, rel?, abs_mm?}
- dc093b0cb jyviko: Kernel rig: a symmetric surface extrude with no convention is the total distance (#9091); the per-side reading is its own case
- 55338e139 jyviko: Kernel rig: each area's PATHS names only its own files, and EXEMPT lists only commands no case uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 0d3c46dad Brett Lawson: solidcore: move the pin to 6a068272 (main, with solidcore#1419 WP4: the level-2 AssertValid tests and SmSurfOfExtrusion::AssertValid, #1578)
- 41e902eaa Brett Lawson: solidcore: move the pin to 0ae36782 (main, with solidcore#1452: SolidError::sm_status and a port-invariant variant)
- c13d760fa Brett Lawson: smlib: a copy queried under the arena's identities is a port-side invariant (solidcore#1452)
- 76c755508 Brett Lawson: smlib: a call answers None exactly when solidcore's error stands for an SMLib status (SolidError::sm_status, solidcore#1452)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9fecf7709 jyviko: Kernel rig: interference and clearance between placed occurrences
- 22cd8e74f jyviko: Ladder generator: cases.py writes the values committed by hand for 05/007, 06/017, 07/016 and 11/003
- 487914427 jyviko: Ladder 05: UNC, UNF, Rc and NPT tapped holes, each drilled to its tap maker's drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3b7dabdb7 jyviko: Kernel rig: bodies moved, copied and extracted, designs inserted, occurrences copied, reparented, dragged and exploded land where worked out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7eb8a5d4 jyviko: Kernel rig: contact sets stop a drive at the block, touching faces don't, and edit, list, enable and disable do as coded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 489441907 jyviko: Kernel rig: motion studies play, plot and trace to known values; a crank-slider's slider follows r cos t + sqrt(l^2 - r^2 sin^2 t)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 236a5597e jyviko: Kernel rig: gears turn by their radii, a rack travels r per radian, a screw its lead per turn, a disc cam lifts 2e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0da95a8cc jyviko: Kernel rig: each joint type moves its part to the placement worked out by hand, limits clamp, as-built keeps it in place
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 445f6faa4 jyviko: Kernel rig: parameter cases, an expression in a sketch dimension and a cyclic one refused
- 2cd1a0335 jyviko: Kernel rig: an assemblies area, with the source files that rerun it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 305c36479 jyviko: Kernel rig: inspect cases, the gap between two spheres, their lens where they overlap, none past the clearance
- 4355e15df jyviko: Kernel rig: inspect cases, a box against a taller one and an identical one, and a tolerance out of range refused
- 7b1fbb57f jyviko: Kernel rig: inspect cases, the comb of a sketch circle and line and a cylinder edge, and nothing picked refused
- 5c80ef4ad jyviko: Kernel rig: inspect cases, three isocurves each way on a cube's top, and a count of 0 refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cacc394f9 jyviko: Kernel rig: inspect cases, the centre of mass and volume of a box, of a box and cylinder, and an unknown body refused
- f43a0c7ac jyviko: Kernel rig: inspect cases, the smallest radius of a fillet, an ellipse and a circular edge, and none on a box
- 311b57bb7 jyviko: Kernel rig: inspect cases, a fillet's seams are G1 with a 1/r curvature jump, a box edge is sharp, too few stations refused
- 58b384d7d jyviko: Kernel rig: inspect cases, the overlap volume of two boxes, none where they only touch, a box inside a box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ac12ba72 jyviko: Kernel rig: construction cases, where three planes meet, and parallel planes or planes through one line refused
- f72108895 jyviko: Kernel rig: construction cases, where two edges meet or come closest, and parallel edges refused
- 1acbf1e9c jyviko: Kernel rig: construction cases, a point on a vertex or another construction point, and no body refused
- 33e3b6379 jyviko: Kernel rig: the inspect area, what reruns it, and the analyses that only draw
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02ee36ce9 jyviko: Kernel rig: construction cases, the plane through parallel and meeting edges, and skew edges refused
- fbe540b40 jyviko: Kernel rig: construction cases, a point along a sketch line and arc, and one past the end held at the end
- a0bd94f4d jyviko: Kernel rig: construction cases, the centre of a circular edge, sphere, torus and sketch arc, and a flat face refused
- 8a8960f13 jyviko: Kernel rig: construction cases, where an edge crosses a square and a slanted plane, and a parallel edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0e3798ae jyviko: Kernel rig: construction cases, the midplane of parallel faces, of a corner, and of a plane with itself
- 3ff1347d9 jyviko: Kernel rig: construction cases, a plane through an edge or axis square to a plane, and a line along the normal refused
- 6fed4f996 jyviko: Kernel rig: construction cases, the tangent plane to a cylinder and a sphere, and a point on the axis refused
- 8be5341c7 jyviko: Kernel rig: construction cases, the plane through three points or vertices, and collinear points refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 776d979ce jyviko: Kernel rig: construction cases, an axis square to a flat face and to a cylinder through a point, and a point on the axis refused
- 84a326f16 jyviko: Kernel rig: construction cases, the axis of a cylinder, a torus and a circular edge, and a flat face refused
- 17c0aee44 jyviko: Kernel rig: construction cases, the line where two planes meet, square and slanted, and parallel planes refused
- f9c53503b jyviko: Kernel rig: construction cases, a plane turned about an axis in it, off it and along its own normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b8c6bb921 jyviko: Kernel rig: thicken a sheet into a slab and a tube, trim by a plane and by a circle, and refuse a stray keep_with
- 70f695c6b jyviko: Kernel rig: grade construction geometry and the numbers a command replies with
- 5c0db8e82 jyviko: Kernel rig: the construction area, with what reruns it
- ffd3d5fb1 jyviko: Kernel rig: construction cases, an axis on a straight box edge, and a circular edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75353cb04 jyviko: Kernel rig: extend, extrude, loft, patch, revolve, stitch and sweep surfaces, a normal case and an edge case each, with their exact areas and surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f861f44e1 jyviko: Kernel rig: a matched sheet meets its target's edge at the order asked, flat where both are flat, and a solid is refused
- 3d080e96a jyviko: Kernel rig: fairing leaves a flat patch flat and a face with no free control rows as it was; zero strength is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 425c8ed42 jyviko: Kernel rig: a blend between coplanar sheets is flat, a step blend meets both sheets at the order asked, and unchained edges are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ac95e47e jyviko: Kernel rig: a reversed normal sends a later thicken to the other side, and a solid is refused
- 680f2ee5c jyviko: Kernel rig: boundary surfaces through a square, a triangle and a network of four lines have their exact areas; five curves are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a01d82f30 jyviko: Kernel rig: untrim removes holes from a sheet, a cylinder sheet and a solid's face, and refuses a face with none
- b2cc77094 jyviko: Kernel rig: unstitch takes a box and a cylinder apart into their faces, or one face out, and refuses a single face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bc3c9185c jyviko: Kernel rig: grade the kinds of a result's surfaces, its B-spline degrees and spans, and its free edges
- 657c5af57 jyviko: Kernel rig: surfaces area; an offset plane, cylinder and sphere land exactly where the distance puts them, and faces across a sharp edge part
- 476b04ed3 jyviko: Kernel rig: ruled strips along a normal, at 45 degrees and tangent are the exact plane, cone and flat ring, and a closed chain mitres into a frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ba60bd9d jyviko: Kernel rig: plastic cases, bosses, lips and grooves, rests, a snap fit edge case and the plastic rules, each with its answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 67dd8892f jyviko: Kernel rig: bend table cases, JSON and CSV rows with angles, radii and K-factor allowances, and an unknown format refused
- 235645db5 jyviko: Kernel rig: the ellipse length's Simpson weights as a named step
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fce8e4a26 jyviko: Kernel rig: perforation cases, square and staggered fields counted hole by hole, a field kept clear of a bend zone, and a pitch refused
- c114e6c35 jyviko: Kernel rig: flat DXF cases, outline, cut and bend line lengths, an ellipse exact and as arcs, and no sheet refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2edf64952 jyviko: Kernel rig: hem cases, closed on a top and a bottom edge, open and flipped, on a flange, and one too short
- c60bcb55e jyviko: Kernel rig: path flange cases, a Z section, one line at 45 degrees down, and a path straight on refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 815711421 jyviko: Kernel rig: second cases for draft (two adjacent faces), rib (in plane), press pull (an edge), split face (sketch and tool face) and sketch projection (a face loop and a silhouette)
- acd7bb066 jyviko: Kernel rig: the boundary-fill crescent ends at the cusps, x = 5
- 45c955326 jyviko: Kernel rig: a case can check the files it writes and the commands' answers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e7810659 jyviko: Kernel rig: frames area, frame member and inserted profile cases with their exact sections, placements and a too-thick wall refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a5513a4e1 jyviko: Kernel rig: boundary fill cases, the lens and the crescent of two cylinders, and a point outside every tool refused
- f0eac58a2 jyviko: Kernel rig: align cases, face onto face as a move, a side face turned onto a top face, and a face onto an offset plane along its normal
- 1e9cefe1e jyviko: Kernel rig: web cases, two gussets in a channel's corners and two walls grown along the sketch normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af8f28e34 jyviko: Kernel rig: scale cases, a cube doubled about its corner, a sphere scaled into an ellipsoid of the same volume, and a zero factor refused
- e1724be62 jyviko: Kernel rig: pattern on path cases, bosses along a line, bodies turning with an arc's tangent, and instances past the path's end refused
- cf58e3735 jyviko: Kernel rig: replace face cases, a top moved onto a plane and a lower step raised to the higher top (fails today: SMLib offset of faces refuses closing the step wall)
- be4f15db6 jyviko: Kernel rig: bounding solid cases, two boxes with a margin and a sphere's exact box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d671bbbc1 jyviko: Kernel rig: every registry command has a case or an exemption (kernel-cases --coverage)
- 6701b1c5e jyviko: Docs: how the kernel rig picks its areas, how a new area joins, and the coverage check
- 585789c60 jyviko: Kernel rig: cone cases, a frustum on X and a full cone of negative height with their exact volume, area and centroid, and a zero height refused; a new solids area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e71177769 jyviko: Docs: the kernel rig gate, updating a known-failing list, re-recording the ladder golden
- d84d00bb4 jyviko: Release gate: the packages' dry run is unsigned and skips the release job
- 02e1f1841 jyviko: Kernel rig: each area runs only when the files its PATHS lists change, every area on the shared core
- b67e93211 jyviko: Kernel rig: an area's PATHS names only its own files, never the shared core
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 376bba92c Brett Lawson: solidcore: move the pin to 3c17ddb1 (main, with solidcore#1480: an intersection edge's end goes to its own vertex, and #1419 WP1's whole-body AssertValid walk)
- c191634b5 Brett Lawson: solidcore: move the pin to 7ca6ce7a (main, with solidcore PR #1427 SmBrep::LocalOperation, #1474 Nx1 corner, and fixes since 3c17ddb1)
- 9c7c139bd Brett Lawson: solidcore: move the pin to b19dbcb5 (main, with solidcore#1476: a shell's implicit offsets take every base upstream casts to a B-spline, and the offset sample bound scales with the input)
- 22a1c20b1 Brett Lawson: solidcore: move the pin to b3baca8e (main, with solidcore#1490 and #1491: a revolve's torus is never inside out and keeps the flag, and a one-circle full turn puts its seam at the profile)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6c5537df6 jyviko: Kernel ladder: a gate run fails on any case whose status or counts differ from the golden
- ee2a1ea06 jyviko: CI: maintainers' pull requests run the tests, and the reference tests run on pull requests
- b4fcd5910 jyviko: Kernel rig: every area and the ladder as a parallel gate on pull requests that touch the kernel
- 18d2dddac jyviko: Release gate: every check in full and in parallel before a branch replaces main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 53da86734 Brett Lawson: solidcore: move the pin to 2a47645e (main, with solidcore#1435: precise properties split at the surface's knots)
- cb79c32ee Brett Lawson: smlib: the curved primitives' measures, round trips and two sweep volumes run on solidcore (solidcore#1435 landed)
- 6e5722af9 Brett Lawson: solidcore: move the pin to fa3caa94 (main, with solidcore#1463: a revolve's cylinder is never inside out, and an inside-out NURB cylinder keeps its frame)
- 9c7e54be4 Brett Lawson: solidcore: move the pin to 43ca3745 (main, with solidcore#1473: SmShell::IsInnerShellOf, and #1419's level-0 helpers)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9008d13f3 jyviko: Surface Extrude: a symmetric distance is the total, as for a solid extrude
- de5c338e7 jyviko: Preferences: keep the older per-side reading of a symmetric surface extrude
- ac70662d6 jyviko: Sweeps: a path through a drawn 3D arc follows the arc, not a spline through its three points
- 7664925fb jyviko: Sketch: Project onto Surface keeps the side the projection meets first, in one curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bb4299e56 jyviko: Tests: a drafted cube side leaves the bottom and the opposite side Kept, the rest Modified
- 29adfd0d7 jyviko: Kernel tests: the barrel's side is the exact surface of revolution of its arc
- 5ada4fc8a jyviko: SMLib: pin 90aabff, a shelled round stays a cylinder and a step wall is ruled as its plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f3b77d71b jyviko: Tests: expectations for the SMLib fixes of 2026-10-29
- 567b764b9 jyviko: Viewport tests: the offset ellipse ring's 512 wall joins are all smooth
- 9d0fb564e jyviko: SMLib: pinned at 60b1c6a: the 43 fixes of 2026-10-29 (tangency-labs/smlib#14–#56)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c93b3ad5a jyviko: Engine tests: SMLib's builds where truck refused or approximated
- b6b59e7b3 jyviko: Naming tests: pieces of one name on a grooved disc, the merged boss wall by its point
- ac52443df jyviko: Ring tests: a cut's volume is the piece it took, not the difference of the ring's volumes
- de606715b jyviko: Placement tests: a body mirrored in SMLib reads back from its record valid
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- d35dcf022 Brett Lawson: solidcore: move the pin to 19d87ca7 (main, with solidcore#1442: walls that meet are refused as WALLS_TOUCH)
- 8493abc90 Brett Lawson: smlib: shell_walls_touch runs on solidcore (solidcore#1442 landed)
- 30d6331a5 Brett Lawson: solidcore: move the pin to 19587445 (main, with solidcore#1453: an offset edge between two analytic faces is their exact line or conic)
- f44e08128 Brett Lawson: smlib: shell_cylinder_open_top runs on solidcore (solidcore#1453 landed)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- f62d6ee6d Brett Lawson: solidcore: move the pin to 4cd55082 (main, with Ellipse::is_nurb_curve_circle, solidcore#1432)
- c11640214 Brett Lawson: solidcore: move the pin to f020a066 (main, with IsNurbSurfaceCylinder / IsNurbSurfaceTorus, solidcore#1433)
- c9b2c18eb Brett Lawson: smlib: circle, cylinder and torus NURBS forms come into solidcore (solidcore#1432, #1433)
- 04c2af035 Brett Lawson: solidcore: move the pin to 3546c9bc (main, with solidcore#1437 and #1445)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ee9fc3793 jyviko: Tests: a torus patch to thicken is cut from SMLib's one-face torus
- ca53656a2 jyviko: Schema tests: an empty face list is checked on the draft, which refuses it
- ab68a3d0f jyviko: View tests: the section cap test draws the cap in the cap colour
- 24bcaca03 jyviko: Engine tests: SMLib's faces, not truck's pieces, in the face counts and measures
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c341006a jyviko: Tests: a cylinder's side and a sphere are one face each, as SMLib builds them
- 6c9c679dc jyviko: Tests: a revolved sheet over one radian is one face, untrimmed over its whole span
- 8075b8f70 jyviko: Tests: a swept point path is its lines, and rails must turn with a cornered path
- b9d65e6bc jyviko: Tests: thicken across a sharp edge extends the offsets until they meet
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3c680d21a jyviko: Geometry: the closest point on a full circle just before its start is found before its end
- 30ceb44e6 jyviko: Tests: SMLib's faces, one per swept segment, closed along a seam, replace truck's halves
- 908bc756c jyviko: Tests: the matchsurf and mixed-fillet helpers read an edge on the curve its interval is on
- 98284eb1e jyviko: Tests: a box thinner than a body's tolerance may be refused instead of getting no certificate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 93bbde86e jyviko: Tests: a script keeps a fillet a parameter makes impossible, a radius below zero
- 913a61329 jyviko: Tests: a tilted cylinder's Intersect cut is checked on the cylinder, not by its mesh's count
- da4f122f4 jyviko: Tests: a face picked by point is found on a block of 256 drilled holes, as on #6720's thread
- d0daee90f jyviko: Tests: a cam's edge is picked on its rim, off the vertex where its circle's seam meets it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ff0dda537 jyviko: UI tests: picks that name one thing, and a thread that names its start
- 2523d13cf jyviko: UI tests: SMLib's cylinder has one wall and one edge per rim; split rims come from two arcs
- b71e5ae6f jyviko: Tests: edges are read on their NURBS forms, a chamfer's chain is its caller's, the cap test's hatch
- 138acad01 jyviko: UI tests: a frame member's volume is compared to the accuracy SMLib measures at
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 319e6b8b3 jyviko: Kernel tests: the chamfer on a tangent wall junction is measured on meshes fine enough
- 68a217d98 jyviko: Reference tests: the loft case is analytic, SolidCraft's correspondence with its closed form
- 73b028b5b jyviko: Kernel: a drafted extrusion of a profile with holes, every wall leaning on the material's side
- b2c5b1f5e jyviko: Designs before format 14: a split's pieces take the names its later features use them by
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a0c13910 jyviko: UI kit: a field's scenario handle is where the field shows
- 271f0c5de jyviko: STEP import: a face's loop through a pole closes its turn, so a dimple keeps its area
- 983b1ca8f jyviko: Sketch projection: a projected face's curves meet at the face's vertices
- 426a505a8 jyviko: Display meshes: tests count the planner's grids; a mesh's outline is one line per straight edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43c1b7b88 jyviko: UI tests: Isocurve Analysis's engine colour is drawn from the theme's accent
- 7bb5bb3d5 jyviko: Locales: Arabic and Hebrew for the version and section hatch labels
- e657e4086 jyviko: UI kit gallery: entries for the controls added without one
- 6a6cd8f56 jyviko: Sketch: a sketch's bounds reach its circles' and arcs' extremes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 23bfa1cf7 jyviko: Tests: the saved fitted-letters design measures its closed form, its letter as conics
- 0e3f01ec0 jyviko: Tests: a loft cut whose top is the basin's whole outline leaves the walls above as their own body
- b3dfcf1ff jyviko: Tests: an engraved face's letters project as conics, their exact quadratic Béziers
- 367beae69 jyviko: Viewport: the analysis legend stays above the floating History card again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a94a025c jyviko: Tests: freezing rebuilt arc borders gets its rebuild from a notch across the arc
- 5cbfbe35d jyviko: Tests: interference lists the pair of a solid and an imported mesh as not checked
- 5489599c0 jyviko: Tests: a face with no attachment is a rib's wall, whose feature reports no roles
- f5dfb78ee jyviko: kernel: a cut's tool face blocks a planar role only where it enters the result
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a31272194 jyviko: Sketch: an included 3D edge keeps its exact curve from the moment it is linked
- 1fb5e94da jyviko: Tests: Intersect's box outline is compared as lines, and a tilted cylinder's whole rim projects to its ellipse
- 9be29894e jyviko: kernel: a cut by a tool apart from the body is the body itself
- 2b0357a22 jyviko: kernel: two planar supports are one when SMLib would call them coincident
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fcd5f7997 jyviko: Tessellation: a node lying on another chord is untangled like a crossing
- 43ad9d0b0 jyviko: Tessellation: a slit (a side the loops run along both ways) bounds the face on neither side
- 534dffa96 jyviko: Tessellation: the band beside a slit and the sag refinement keep the face on both sides of it
- 7b984936a jyviko: kernel: an emboss's arcs run on their wall's own frame, and its seam is read from the circle's angles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f9347aca7 jyviko: Tests: the mirrored union's volume held to the two integrals' 1e-8 accuracy
- bb0b146a9 jyviko: Tests: #1510's parts are weighed by their exact volumes, not 1e-3 mm meshes
- d5bd1ebfd jyviko: Bridge: a support surface's shape read about a station in its middle has the right signs
- a6054603d jyviko: Tests: fillet removals from exact volumes; SMLib's rounds match Pappus and the quadrature
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a780de5f jyviko: Tests: the helical groove's removed volume from the cut's exact volume, not a 0.01 mm mesh's
- 80b7ce28e jyviko: Tests: volume checks held to what their measures can tell, not tighter
- a3e42e548 jyviko: Tests: the cap whose loops prism_measure compares is found by its plane, not as the last face
- fad9c44da jyviko: kernel: measure integrates to SMLib's finest accuracy, 1e-8, not 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 666ccd85d jyviko: Tessellation: sag refinement splits a flat triangle's long side and never across an obtuse one's short side
- 2b22b2cbe jyviko: Tessellation: a face's sides are flipped where the triangles lie closer along the surface the other way
- e0d5ee496 jyviko: Tests: thicken and raised-band histories checked as SMLib reports them, Meet edges and seams included
- 39e1dcea0 jyviko: Faceted boolean: a body's own mesh is closed once its faces' shared corners are one vertex
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ec4b7212 jyviko: Tests: a face's flat area may differ from its surface's by the sails its boundary chords bridge
- 4626f83e5 jyviko: Tests: a sketch curve splits a cylinder's one side face in two, not a half side
- 9e97bc470 jyviko: Tests: a split face without its record exports as the body has it, and the next operation joins it
- 47b1d716d jyviko: Tessellation: a whole sphere's loop starts off its poles when its seam has two segments
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8eb77affb jyviko: Kernel: a body's size counts its edges, so a sphere, cylinder or torus is its own size
- 6a06226ad jyviko: UI tests: the split face's isocurve pieces are each wider than the lines' spacing
- eb40e161d jyviko: Tests: the thread whose display is checked is made as the thread feature makes one, with exact helices
- 71ea626d0 jyviko: Tests: a quarter disc tapered outward builds, and its volume is the exact integral of its sections
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d91d3f2a6 jyviko: Kernel: a body moved by a non-rigid matrix keeps each face's source and paint on that face
- c1ead0fef jyviko: Kernel: a sweep along a smooth path names every wall, and a closed one has no caps
- 6387be309 jyviko: Tests: the high-degree line prism_curve certifies is written at the record's highest degree
- 55f48e4e5 jyviko: Tests: the sample-aliasing trap aliases by its knots, within the degree a record holds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5547cd98a jyviko: Blends: a picked edge is named as the blend takes it, the rim and not the seam
- 1cb713c96 jyviko: Kernel: an extrusion's wall seed marks only the edges nearest it
- db9cf693a jyviko: Kernel: an extrusion's cap is in its own plane however thin the extrusion
- de16a6b99 jyviko: Kernel: a half turn's caps keep their roles when its end plane is its start plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8c2fba07 jyviko: STEP import: FILE_DESCRIPTION and the preprocessor name a Y-up exporter again
- 5cc0d5e9c jyviko: Threads: a metric size without a coarse pitch suggests its fine pitches again
- e0545b2bd jyviko: Measure: an arc edge's angle is its span on the circle, not its NURBS parameter
- ae5dc2416 jyviko: Split Body: a face tool runs over its own surface's parameters
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a8753443 jyviko: Fill: the height-field fill tries grids up to 64 spans
- dc3d504ba jyviko: geom: a fill patch folds where its normal reverses between neighbours, not where it turns past the middle's
- bac6674ab jyviko: geom: patches about a fill's centre run in the spaces of their own sides, not one space of every edge's breaks
- ea6500559 jyviko: geom: patches about a fill's centre are solved by blocks, their banded interiors eliminated onto what they share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b389601b0 jyviko: Ruled surface: a strip on a cone is SMLib's revolve of its ruling, a cone face
- 1e7713d1e jyviko: Fill: a patch's edges and vertices hold its fit's gap in SMLib's tolerance model
- 4faee7dd8 jyviko: Fill: the general fill takes a loop of one or two edges in exact pieces of their curves
- c5b038548 jyviko: Fill: its tolerances follow a size that does not depend on where the body is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9095fce42 jyviko: SMLib export: a NURBS edge's interval a rounding past its knots is the NURBS's own
- b68f71a2d jyviko: Fill: a patch's edges are the body's own edges again, circles and ellipses included
- b540faaf5 jyviko: Thicken: a surface turned to its back grows the other way again
- ebb1d843a jyviko: Sweep: a parallel sweep whose path runs along the profile's plane is refused again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60f33f6fc jyviko: Feature walks: Repair Part has its fixture, its gap an input and its body renamed with the rest
- 075f307bf jyviko: UI tests: a shown dimension that breaks a later feature does it with a shell left no room
- 242bbc89f jyviko: Fillet rig: the known-failing list follows the SMLib 7e917f0 pin
- 8515dc1a3 jyviko: Blend tests: a vertical round run on up a top round's end arc (ladder 07-fillets/018) is SMLib's to end, and builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 229739a70 jyviko: Blends: a smooth edge and an unfinished tangent chain are refused saying why; SMLib's unsupported corner is named
- 0ec97c570 jyviko: Blends: tangent propagation off blends the picked edges alone; a refusal says how to change it
- 94d763c83 jyviko: Tests: a round run on through an earlier one by tangent propagation is matched by the same edges together
- a0eaceab5 jyviko: SMLib tests: a round larger than the cube is cut as if its faces went on, at its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d00ad78c jyviko: kernel: a patch builds G0 to G4, and Continuity Analysis reads each seam's middle at the order asked
- 102cde292 jyviko: Kernel rig: patched holes graded by their continuity, at clashing corners and in one sheet
- 7c9a9051d jyviko: Patch: the continuity choice's hover text says the corners stay tangent where the faces round them clash
- ef93b18ed jyviko: SMLib: pinned at 7e917f0: a corner patch tangent to its sides, an unsupported corner named, a torus from a NURBS a whole turn round its tube
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- d6b3bf27b Brett Lawson: Shell walls-touch case waits on solidcore#1442 (port fork a759622)
- 29a1ac5a6 Brett Lawson: Sweep cases name their solidcore issues (#1449 draft corners, #1450 curve-sweep placement, #1451 planar sections)
- 4f1ad5cc6 Brett Lawson: Cylinder shell case waits on solidcore#1453 (port fork fddc366 + 98ab1b0)
- c9aa5116d Brett Lawson: solidcore: move the pin to 9b76ac13 (main, with SmApiBrepMaterialCensus, solidcore#1436)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 86e4226ae Brett Lawson: solidcore backend: every UpstreamFixes flag on, and the ignored cases name their solidcore issues
- ce5de8bcf Brett Lawson: Sphere measurement cases wait on solidcore#1437 (trim_boundary_seam_wrap at the poles)
- 5140556c7 Brett Lawson: Blend refusals name their solidcore issues (#960, #1438, #1439, #430)
- 263f34850 Brett Lawson: Offset cases name their solidcore issues (#1440 face picks, #1441 ApproximateSurface, #1060, #1019, PR #1427)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from branch jyviko/merge-main-develop-solidcore (#11360). Its changes conflict with main as it is, so this wave keeps the previous files; the next wave that merges cleanly holds them.
- 21eba6a38 Brett Lawson: claim: solidcore backend for develop
- 8c12073be Brett Lawson: Kernel: a solidcore backend behind crates/smlib, routed per operation
- 12ace4973 Brett Lawson: diagnostics.kernel: read and set which kernel answers, and see the routing table
- 976acfd76 Brett Lawson: Conversion tests: each ignored case names its solidcore issue (#1431, #1432, #1433)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9c84bdb jyviko: geom: the patch fill is tangent continuous across its own C0 knot lines, and tapers what its corners do not allow
- 2397a691c jyviko: geom: the patch fill is faired at the order it is asked for
- 0631d2d3a jyviko: kernel: a three-round corner patched G2 and G3, read off the faces at each seam
- 11af682c0 jyviko: examples: cleaning up rounds by patching their messy faces, G2 and G3
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f11c0c571 jyviko: Bodies: an operation's result is its record, not the SMLib body it was exported from
- b121d8d00 jyviko: frames tests: the moved combine tool's part is made ungrounded
- e0c7867b9 jyviko: run_strict: the box's volume to 1e-9, as SMLib integrates it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 00faac965 jyviko: kernel: a planar sheet's loop splits where it passes one vertex twice
- 5d25684a1 jyviko: sheet tests: the flat pattern as SMLib's exact 2D boolean makes it
- 52343ba23 jyviko: Robustness tests: a round's tangent chain and the lid's closed-form volume
- bc6d31e60 jyviko: GPU tests build their designs with SMLib, and the GPU jobs fetch it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ab3ba1af4 jyviko: Mesh: a ray through an edge two triangles share crosses one of them
- ccff7224c jyviko: Shell: its planar walls carry their shell roles again
- 068c6a6dc jyviko: Shell certificate tests: the saved strips are saved data, not rebuilt pieces
- b9d4ad74f jyviko: kernel: a planar region inside another's hole keeps its material
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17465a63b jyviko: Tests: the kernel-cases ladder is the reference for what the kernel builds; the seeded robustness goldens go
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 517fc01dc jyviko: Fillet rig: a regression gate on every pull request that touches fillet code
- b91ad9de2 jyviko: Splines: every degree a B-rep record holds is evaluated, so a G4 blend of degree 9 gets its pcurves
- 175b4f2ac jyviko: GPU tessellation: the shader's basis slots follow the CPU evaluator's highest degree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 39bf63b16 jyviko: Kernel rig: designed continuity cases, G0 to G4, that prove the measurement
- 52339b7ec jyviko: Kernel rig: fillet cases for the open fillet issues, each with its exact answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455)
crates/geom/src/hlr (L0): prepare once per body, then hidden_lines for a
scene of placed bodies. Edges and face silhouettes are projected from their
exact curves, split where projections cross, and each piece is classified by
rays toward the viewer against the trimmed faces: visible, hidden or
explicitly uncertain, never guessed. Planes, cylinders, cones, spheres and
tori are supported whether stored as analytic records, revolutions or spline
patches; freeform faces are reported and make what they could hide
uncertain. Screen geometry is Seg2 with the W01a accuracy vocabulary: exact
lines and conic arcs where the projection is exact, bounded chords
otherwise. docs/drawing-hlr.md holds the contract and its limits.
* geom/hlr: handle the brep records main gained in #3093
Main's exact model storage (#3093) added Curve::SurfaceIntersection,
Surface::PlaneThrough and Surface::PlacedRevolution, and the HLR matches on
the records no longer compiled. A plane through three points is a plane: it
is trimmed and intersected as one, and a box stored that way draws the same
bits as one with axis-stored planes. The procedural intersection curve and
the placed revolution (whose affine placement may scale it unevenly) are
refused by prepare as not supported yet, until the kernel adapter handles
them. The records' positions move with the body's centre like the others.
* geom/hlr: pad plane faces' boxes, so a plane record off by rounding still hides
Plane faces took the box of their boundary chords unpadded, flat along the
normal. When the plane record and its edges disagree by rounding (a unit cube's
top plane one ulp above its edges, a 100 mm cube's 1e-11), the ray toward the
viewer reached the plane just outside that box, the slab test culled the hit,
and the back edges came out Visible with no doubt. Every face's box is now
padded by 1e-6 of its size, as curved faces' boxes already were. Reported by
DevonHope on #2457.
* geom/hlr: limits from review: trim samples, scene extent, crossing pairs, surface groups
From DevonHope's review of #2457:
- Options::trim_samples must be 1 to MAX_TRIM_SAMPLES (4096).
- Placed bodies must stay within MAX_COORDINATE (1e12 mm, as section and brep
bound stored numbers). Placements 1e200 apart made the scene's size infinite
and every tolerance taken from it with it, so everything came out Visible.
- The crossing search counts its candidate pairs before it starts and meets
each pair only in the first grid cell the two segments share, instead of
keeping a set of the pairs met, which could outgrow wasm's 4 GB before the
500 million pair budget tripped. The same pairs in the same order.
- prepare groups faces on one quadric or torus by comparing each face with
the faces of its kind whose size agrees to the tolerance (sorted), not with
every face; at most 50 million comparisons. prepare_cancellable polls a
cancel callback between edges, faces and comparisons.
* geom/hlr: boundary chords on a grid, and no fine pass over coincident curved chords
The cost items of DevonHope's review of #2457:
- Every ray hit asked how far it lies from its face's boundary by scanning all
of the face's chords (4096 per circle; a plate's face with 256 holes has
about a million). The chords are now bucketed on a uniform grid over the
boundary's box, cells at least as long as the longest chord, and the test
looks only at the cells around the point. It finds exactly the chords the
scan finds.
- Chords of two curved curves that lie on each other end to end (aligned holes
seen along their axes) were cut into 16 by 16 pieces and intersected, to
find crossings that are only noise within the curves' tolerance. They are
now skipped; visibility changes where a coincident run starts or ends, and
chords that only partly overlap still find those.
- Fixtures: a plate with holes, coaxial cylinders seen along their axis, and
300 placements.
* geom/hlr: pad boxes by the body's coordinates too; coincident chords only to rounding
Review of the previous commits found two holes:
- The padding grew with the face's size, but rounding grows with where the body
was modelled: a 0.001 mm cube 1e7 mm out, its top plane one step (1.9e-9 mm)
above its edges, still had its hit culled. The pad now adds 1e-12 of the
body's offset.
- Two chords were taken for coincident when their ends lay within each other's
sag, which in a coarse scene can hide real crossings: an arc can bulge across
a line 1 mm off its chord twice. Only chords that coincide to rounding are
skipped now; identical projections, the costly case, still are.
* geom/hlr: coincident curves meeting at shared sample points do not cross
Timing the review's scenes showed that skipping coincident chords was not
enough: chords of two coincident curves also touch end to end at every sample
point they share, and each touch was a crossing to refine and split at. 64
coaxial cylinders seen along their axis gave 8.3 million crossings (19 s), 64
cylinders one behind another along the line of sight 4.2 million (214 s;
before these commits the crossing budget refused it). A touch at a shared
sample point is now dropped when the two curves also coincide, to rounding, on
both sides of it. Where a coincident run starts or ends one side differs, and
the touch is kept.
* geom/hlr: the own-face margin allows for rounding where a body was modelled
The far 0.001 mm cube of the previous commit showed a second effect of records
rounded at large coordinates: its top plane, one ulp (1.9e-9 mm) above its
edges, hid the top edges themselves, because a ray leaving an edge met its own
face 3.2e-9 mm along, past the own-face margin of 1e-6 of the face (1.4e-9).
The margin now also covers 1e-14 of the body's offset (about 45 ulps of its
coordinates), which only matters for parts far smaller than their distance
from the origin.
* geom/hlr: no parity test for a hit on the boundary, where it is uncertain anyway
* docs/drawing-hlr: the fixtures of the review's second round
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Title blocks: what a cell shows and where its text goes (#3875)
geom::cell holds a title-block cell's content: parts of text and fields
(component, drawing, sheet, revision or prompt, by key, with an optional
unit and decimals kept as written for the resolver to check), at most 64
parts and 4096 bytes of text, with no control character but a line break.
Beside it are a resolved value (live, overridden and drifted, or missing,
with "-" for each part that couldn't be read and why), an override with
the value it replaced, and the projection a drawing's views use (first or
third angle), which the title block's symbol will read.
A fit warns and never cuts: a count of characters, not bytes, with its own
count for text in Chinese, Japanese, Korean or Yi characters.
The cell text rule places a label and a value: the label's baseline 1 mm
plus its cap height below the cell's top, the value box under it inset by
1 mm, one line centred in the box, and wrapped or several lines down from
its top at the font's pitch, with a warning when the last falls below the
box. Wrapping by width, width warnings and glyphs a font lacks need the
text measured, so they wait for the paper scene's text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Title blocks: definitions and their place on a sheet (#3875)
geom::title_block holds a title block's definition: its size (1 to 1000
mm a side), its outline and cell line widths, and up to 64 cells. Each cell
has a snake-case name of its own, a rectangle measured from the block's
lower-right corner, an optional one-line label with its cap height, and a
value: text from cell content, with its cap height, alignment and fit, or
the projection symbol, which reads the drawing's projection and is never
fixed in the block.
validate() checks a definition on its own, as when one is read: cells
inside the block and not overlapping (touching is fine), label and value
cap heights that fit, and the content's own limits. layout() puts the
block on the drawing border's lower-right corner of a sheet, refusing one
that doesn't fit, and gives each cell's rectangle, its label's place and
its value box by the cell text rule. On A3 landscape a 180 x 54 mm block
runs from (230, 10) to (410, 64); it fits A5 landscape and every larger
sheet, but not A5 upright.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cell text: a value box lies within the paper's coordinates (#3875)
place_lines took any finite, ordered value box, but centring one far out (min x 1e308, max x
1.1e308) overflows: the anchor came back infinite, with no warning. 0xlillith found it in review
of #3877.
The paper scene already bounds every coordinate it holds by MAX_COORDINATE_MM (twenty times
the longest sheet side). That limit is now public, and place_lines keeps its box inside it, so
its anchor is always finite: one rule for what a paper coordinate may be.
Tests: the hostile-box test refuses both overflow cases from the review and a box just past the
limit on each side, and places lines in a box the size of the whole paper limit. The fuzz test's
numbers now include values past the limit (1.1e5, ±1e308).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Title blocks: padding from the lines' inner edges, one label rule, nothing unread (#3875)
A cell's text is padded from the inner edge of its lines: each side of a cell moves in by half
the line drawn on it (the outline's on the block's edges, a cell line's inside), so a wide
outline never covers the text. Before, the padding ran from the line's centre.
The label's one-line rule lives with the cell text rules (`cell::check_label`), where parts
lists will find it. The cell types nothing read yet (`Override`, `Resolved`, `State`,
`Problem`, `Reason` and `MISSING`) wait for the resolver that will read them.
The tests check the exact thresholds inside the lines (a label that leaves no room, a value
that just fits), pick each of the lines, alignment and wrapping on their own so every
combination comes up, and lay fuzzed blocks out on every standard sheet, either way, with and
without the filing margin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Title blocks: the drawing border's line, descenders, room where the block sits (#3875)
From DevonHope's review of #3877:
- Each cell's lines are clamped to the inner edge of the drawing border's line. That line runs
along the block's right and bottom edges, and along any other edge it reaches, as when the
block fills the border. Aabb2::intersection, the 2D twin of Aabb3's, does the clamping.
- layout checks each cell's room again where the block sits (place_cells, which validate runs
at the origin), so rounding at the real corner can't turn a cell inside out.
- The cell text rule counts descenders, at 3/10 of the cap height (ISO 3098's lettering B).
They may reach into the padding under a value box, never past it to a line. place_lines
warns Height when they would, and validate asks it whether one line fits.
- The module doc no longer links to a private function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4816
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views as data: named views, scales and the map onto paper (#4816, W17a P1)
What a drawing view is, before anything draws it (geom::drawing_view):
- NamedView: the six principal views and the isometric views from the four upper corners, each
an exact basis (a Plane whose normal points back at the viewer), never taken from a camera,
whose pitch clamp would tilt a top view, with no -0 to write out; `iso` reads as the
front-right one.
- basis_looking: any other view from its direction, an up and an origin (paper x = direction x up,
paper y = x x direction), refusing a zero direction, an up along it, or an origin that isn't
finite or within 1e12 mm. W07's
{direction, up, origin} view reads through it.
- Scale: paper : model as two positive numbers, read and written as "1:2", from 1:100000 to
1000:1; Scale::fit picks the largest ISO 5455 preset (50:1 to 1:10000) at which a view fits a
space (W07's "fits the page" default), compared as size x paper <= room x model so an exact
fit at a reduction isn't lost to rounding.
- ViewFrame: a view's basis, scale and place on paper, the point of its plane at `centre`
landing at `position_mm`. Its paper map moves the view's curves and their accuracy onto
paper (paper error = scale x model error); `boundary` maps a box of its plane onto paper from
its four corners.
In geom, where Seg2 lives:
- Similarity2 and Seg2::similar (new): scale, turn and shift a segment exactly, an arc staying an
arc. Similarity2::new refuses a scale that isn't above 0 and works the turn out once, not per
point;
- Seg2::map_controls: a segment's control points mapped by any function. It was doc's
sheet::map_controls; its four callers in doc use the method now, unchanged.
CurveAccuracy::scaled gives a curve's accuracy at another scale.
Tests: each named view's basis and viewer side, and the same bases from a direction and up; a 50 mm cube in every principal view at 1:1 and
1:2, and in isometric (edges 50 x sqrt(2/3), outline 50 x sqrt(2)); the view's centre on its
position (W07's 100 x 20 front view on A3 at 2:1); scales read, written and refused; the fitted
scale, an exact fit at 1:5 and ISO's smallest; no -0 in any named view's axes; an origin refused by
its own message; hostile bases, centres and positions; every segment kind moved by a similarity,
and the similarities refused; scaled accuracy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: the bottom view pinned, square near parallel, bounded scales and boxes (#4816)
From DevonHope's review of #4817:
- The tests pin all six principal views exactly. The direction-and-up test uses literal ups,
so a bottom view turned half round now fails it.
- basis_looking squares x to the direction before normalising. Near the 1e-9 threshold the
normal was up to 8.8e-9 rad off; now it is about 1e-16.
- Scale::fit fits nothing for a size or room that is negative or not finite. A size of 0 still
sets no limit that way.
- Each side of a scale is 1e-6 to 1e6, so a scale writes at most 49 characters.
- ViewFrame::boundary returns a Result. It refuses a box that is inside out or not finite on
paper, instead of dropping a corner.
- paper_map, boundary and seg_to_paper say which coordinates they take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The first export of a paper scene, as SVG first (jyviko and 0xlillith on #4890), from the research
in the plan's §16. A3b adds ellipses, hyperbolas and Béziers above degree 3, which this refuses as
"not supported yet".
- `geom::paper::Prepared`: writers read a scene through `Scene::prepare`, which checks it first, so
none reads one unchecked. Clipping goes there too, once (A8).
- `geom::paper::arc_pieces`: an arc's ends in pieces of at most a quarter turn, the last its own end.
A half turn drawn from its ends is ill-conditioned: rounded to the nanometre (six decimals of a millimetre) its
centre moves up to 1e-2 mm, where a quarter turn's stays under 1e-6 mm.
- `io::paper::paper_svg`: one user unit a millimetre, the size in mm on the root; y flipped by
writing the height less y, so the file's numbers are page coordinates and an anticlockwise arc
has sweep flag 0; lines `L`, arcs `A` (never large-arc), cubics `C`, parabolas `Q`; fills
black and even-odd; one path per item; groups as `data-object` and `data-kind` (object ids can't
be XML ids). No background, so cutters see only the marks.
- Numbers are whole nanometres (six decimals of a millimetre): no exponent, no "-0", the same bytes every time. They are the
writer's own state too, so a joint is written once and a closed path ends exactly on its first
point. Numbers are written straight onto the document, with no text made per number. A width
under half a nanometre is written as one, and a piece too short for the grid is merged into the
next, both counted in the report; a path's last piece has no next, so it is kept however short
(unless it has no length). Output over 64 MiB is refused.
Tests: the A3 drawing border's whole document; quarter, 270°, clockwise and whole-turn arcs, and a
circle of two halves giving the same four quarters; the quarter-turn boundary both sides; cubics and
parabolas, and the conics refused; the number format; a closed path whose start and end round
apart; a sliver merged; an open path's short last line and arc kept, and one of no length dropped; read back through our own SVG reader (lines exactly, the arc as an arc);
the scene's JSON mutated into the writer (never a panic).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* File format families: drawings share the design format's versioning (#3890)
The format code works for a family of files: its own tag, its own numbers and
its own folder of change files, with one reading of a file's format, one
refusal of a file a newer build saved and one upgrade for every family. Designs
(solidcraft/N) are one family and keep everything they had: FORMAT and FORMATS
are as they were, and pending_names, format_string, version_of and read mean
what they did. Drawings (solidcraft-drawing/N) are the other, with format 1 as
their first record and each later change one file in
crates/doc/src/drawing/format/pending/, as design changes are. Nothing saved
changes.
A design tag never reads as a drawing's or the other way round, and a file that
names no format is a design from before format strings, never a drawing. Every
refusal names its family; a design's read word for word as before. A design
listing a pending change this build doesn't have is now refused as a newer
build's before its content is checked, as a newer number already was, so a
newer build's fields never read as damage. The list reader is
take_names(v, key, noun), the shape #4811 uses for its own list.
For the maintainer, the release step changes: scripts/fold-format-pending.sh
now folds every family that crates/doc/build.rs lists (FAMILIES), each into
its own next number: designs into crates/doc/src/format/v<N>/ as before,
drawings into crates/doc/src/drawing/format/v<N>/ from 2. With nothing pending
in a family it says so and moves nothing. Its test folds a drawing change into
v2 beside the design changes. docs/releasing.md, CONTRIBUTING.md and AGENTS.md say so.
build.rs lists each family's changes from its own folder, each folder's
versions contiguous from its own base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing record: format 1 of the drawing family (#3890)
A drawing is now a record of its own (crates/doc/src/drawing.rs): its name,
the designs it draws (sources: an id and the design file's path, relative to
the drawing's folder as a linked design's is), its properties under the design
metadata's rules, its units (each design's own, or one length unit of the
expression unit table), its content language (a BCP 47 tag) and its sheets.
A sheet holds its paper, a copy of its drawing border's profile, the
resolution its pictures are rendered at (300 dpi unless it says, 25 to 2400),
the component it documents and whether it is left out of the sheet count or
of printing. This is format 1 of the drawing family; each later kind of
record adds one file in crates/doc/src/drawing/format/pending/.
The rules: one id counter for every object, raised above the largest id when
a file is read and never rewound; every reference is an id that must resolve,
or the file is damaged and refused, never patched; 1 to 1,000 sheets, at most
64 sources, names of 1 to 256 bytes, paths of 1 to 4,096 bytes without NUL.
The same drawing always saves as the same bytes.
Drawing::from_json reads at most 16 MiB of text, then runs the family's format
check, the number check, the upgrade, the typed record (unknown fields refused
everywhere) and Drawing::validate. The number check is now one function every
family calls, Family::check_numbers, told which field holds other tools' data;
a design's refusals read as before.
Nothing saves or opens a drawing yet: the container is the next step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing ids: random and collision-free from format 1 (#3890)
A drawing's objects now take random ids, the form jyviko chose on #3890 from
#1017: no counter, so objects added on two branches never share an id and
never edit one line. The allocator is one module for drawings now and designs
later (#626 Phase 3), crates/doc/src/ids.rs: an IdSource gives nonzero u64s by
splitmix64 from a seed, each checked against the ids in use and drawn again
when it is one, or when it is 0. A run never draws a number twice, so at most
one draw per id in use comes before a free one, and a seeded run over a file
the same seed made still gets a new id. IdSource::seeded gives the same ids
for tests and replays; IdSource::from_entropy seeds a session from the
standard library's hash keys, the time and a count, with no new dependency.
In a file an id is 13 characters of Crockford base32, lowercase
(0000000000001 to fzzzzzzzzzzzz): ids::encode writes it and ids::decode reads
only that spelling, case-sensitive, so an id has one form to search for.
Anything else, 0 included, makes the drawing damaged. The drawing loses
next_id (a file that holds one is refused), and Drawing::new and allocate_id
take the IdSource. Messages name ids as the file writes them. The component a
sheet documents stays its design's own number until designs move over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing record: a drawing too large to reopen isn't saved (#3890)
from_json reads at most MAX_DRAWING_BYTES (16 MiB), but to_json had no limit. Other tools'
properties are kept as they came, and indenting them can grow a drawing read in at about 4 MB
past 16 MiB (two million zeros in one array), so the next read refused what the save had just
written. 0xlillith found it in review of #3891.
to_json now returns a Result and refuses JSON longer than a read takes ("drawing too large to
save (at most 16 MiB)"), so every drawing saved opens again. Nothing writes drawing files yet, so
the error reaches the future file writer before it publishes anything.
Test: that case is refused, and a smaller compact drawing saves and reopens unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890)
K3 of the drawing storage plan (W11.2): the file a drawing is saved in. Nothing writes one from a
command yet; opening and saving come with K5.
- A drawing container is a design container holding `drawing.json` (Deflate, as `document.json`)
in place of `document.json`, and `container.json` says so:
{"content": "drawing", "format": "solidcraft-container/1"}. A design's `container.json` is as it
was, with no `content`. The plain JSON form is the drawing's own text. Both give the same bytes
every save, so a drawing can live in version control as text.
- `io::file_kind` tells a design from a drawing by `container.json` or by the JSON's format. The
design reader refuses a drawing ("this file is a SolidCraft drawing, not a design: open it as a
drawing") and the drawing reader a design; plain JSON only asks when it isn't a design, so
reading a design costs nothing more. A container's content this build doesn't know, or a drawing
container that also holds a design's `document.json`, is refused.
- `read_drawing` (bytes, either form), `read_drawing_file` (one seekable handle, the design
reader's checks) and `write_drawing_container`; `DRAWING_EXT` (`scdwg`) and
`is_drawing_path` beside the design's.
- The container writer's set-up and finish, the file opening and the container sniffing move into
one function each, which designs and drawings both use. The container's own checks (budgets,
entries, the ZIP directory) are the design container's, word for word.
Tests: a drawing round-trips through both forms byte for byte, and the container holds exactly
`container.json` and `drawing.json`; `file_kind` on both forms of both kinds; each reader refuses
the other's file; unknown content, a stray `document.json`, a missing drawing, an unknown
container version and a damaged drawing refused; both forms from disk, and a directory refused;
mutation fuzz of both forms (an error or a drawing, never a panic).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b859fe6 jyviko: STEP import: a whole sphere bounded by one seam has its frame on that seam
- ce71791ec jyviko: Spline surfaces: a closed spline whose outermost knots appear once is periodic
- c7373279d jyviko: Viewport: hidden edges are drawn before the visible ones, so a visible edge is never covered by a light hidden copy
- b3cb826ed jyviko: Engine: an optional check before every command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6055ce6fd jyviko: step_in tests: knot multiplicities refused per knot, then by their sum
- ae393fd9c jyviko: step_in tests: a face with too many bounds is refused by the reader's own limit
- fc3a13f17 jyviko: step_in tests: the import's repair notes for added seams and turned faces
- 4688c0f20 jyviko: STEP import: a whole round face whose seam is off its frame's quarter lines is turned onto one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d2858cb3d jyviko: STEP import: a circle edge between two vertices is the arc between them, however short
- 8b4b4a9d6 jyviko: SMLib pcurves: an end SMLib moves within the tolerance it held the edge at is mapped
- 6c355fdf7 jyviko: step_in tests: the cube fixture's edge directions clear of the assembly fixtures' ids
- efdc245d1 jyviko: step_in tests: a face the reader refuses leaves the rest of the solid as surfaces, named
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cfaf4ab55 jyviko: Kernel rig: the reason each refused sheet-metal, sweep, crash and ladder case must be refused for
- 30dc4c860 jyviko: Section hatch by part: touching cut parts never look alike
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2dd505d83 jyviko: kernel tests: rustfmt
- ee4d4b5a5 jyviko: STEP import: a round face off its frame's quarter lines is formed within one turn
- 97a31c0c0 jyviko: SMLib: the prebuilt where a union that seals a void keeps its enclosing shell first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 025344dee jyviko: A refused face is tinted as well as ringed
- 25642b6d2 jyviko: STEP import: a part's later instances in a window wait for its first, not end the window
- c1713994f jyviko: Body::unmeshed_faces counts on the coarse plan, without making the mesh
- d0081b235 jyviko: kernel: a placed copy is planned as its original, moved, as its mesh already is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 188011736 jyviko: A part the modelling kernel refuses is named, with what is wrong and what to do
- d3b8c3dc5 jyviko: Browser: Repair Part is planned under #8371
- c15c39443 jyviko: Open and import card: the step marks share one box, size and stroke
- 090fcec6c jyviko: A refused face is ringed in the error colour while the window points at it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 06fbcdfec jyviko: Fillet dialog: Setback shows its default as a length and flags one too small before OK
- baa44fc64 jyviko: Fillet dialog: a setback the field flags is not refused again under the dialog
- b7d813bd6 jyviko: Open and import card: three plain steps instead of a status line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 33acb6dc3 jyviko: Section cap by crossing count: a body touching the cut body no longer shows through
- c33bae870 jyviko: Section cap: only closed bodies take part in the crossing count
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97721ad05 jyviko: Fillet setbacks not past where the rounds meet are refused naming the least; the rig grades a refusal by its reason
- 3fd5e138c jyviko: kernel: rustfmt
- 61a1f8bf2 jyviko: STEP import: a face's NURBS form ends where its boundary does, within its tolerance
- cd4f72572 jyviko: STEP import: a surface model's closed shell beside a sheet is a solid of its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 912bccef6 jyviko: Isocurve Analysis: faces on one surface share their lines
- 29744b811 jyviko: Preview: the ghost leaves out the surface the changed body keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739153d3d jyviko: Fillet dialog: one option model, plain labels, refusals in plain words
- e4844753c jyviko: SMLib: the prebuilt with a torus or sphere keeping its NURBS form, and the concave mixed fillet corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd5319a0e jyviko: docs: the kernel's move from truck to SMLib, as written up on #4012
- 4cb0d6ee9 jyviko: STEP import: a refused solid comes in as a surface body of its exact faces
- e19785620 jyviko: STEP import: a refused solid's surface body faces as the file has it
- 529fb7cf3 jyviko: Release: macOS builds on macos-15 (GitHub retires macos-14 on 2026-11-02)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a596dd95 jyviko: STEP import: a patch side collapsed within its vertex's tolerance is a pole of the loop
- cfee4a720 jyviko: STEP import: a solid no B-rep can be made of is shown as a mesh of the faces that read
- 5bfecd8a0 jyviko: Tessellation: a loop corner on a side collapsed within its vertex's tolerance is a pole; a face no method plans is left out, named
- 0102f95dc jyviko: Tessellation tests: rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0bee8c2ed jyviko: solidcraft-smlib: Brep::edge_face_distance, SMLib's own edge/face gap
- 5d6810128 jyviko: STEP and SMLib: no edge or vertex tolerance past the 1 mm SMLib takes
- 005b1e6ea jyviko: SMLib pcurves: an edge past its face's patch gets a tolerance that covers it
- f327cdb3d jyviko: solidcraft-smlib test: an edge 2.5 um past its patch keeps its interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd34314d5 jyviko: UI: one continuity control for every continuity choice
- fab8948b3 jyviko: Clippy: assign operators and is_multiple_of in the continuity code
- 1260353f4 jyviko: Fillet Corners: the shared continuity control says what each corner builds
- bf16a76a4 jyviko: SMLib: the prebuilt with eased setbacks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f042d2073 jyviko: Isocurve test: the spline face's hole is an inner loop of one face (Refs #770)
- cb8712aa0 jyviko: Continuity: one table of orders G0-G4, and one check of what each construction builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0694fd4e8 jyviko: STEP import: an edge through a face's pole is split there
- 1d70ac267 jyviko: tess: a face whose boundary still crosses itself after untangling is filled leniently, not the whole body refused
- 77bd85cab jyviko: cli: snapshot --quality coarse|normal|fine|ultra meshes the bodies at that display quality
- 1404bc1f5 jyviko: STEP import: a spline face's edges are measured on their pcurves only, not by nearest point first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e2c0c0a20 jyviko: pcurve: the lift check samples its interval's end exactly
- 293d19f65 jyviko: STEP import: a vertex's tolerance covers its edges', and edge samples end exactly
- 19c4a1502 jyviko: SMLib pcurves: an end SMLib sets within the edge's tolerance is mapped onto our interval
- fc08b5f99 jyviko: bspline: a parameter a rounding past the domain's end is that end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfcdefa92 jyviko: STEP import: a loop jumps at a pole to within the tolerance, as its pcurves closed it
- 7ba82d729 jyviko: STEP import: spindle and horn tori, and a negative major radius
- 3a7b51f72 jyviko: STEP import: an edge's distance from an analytic face is measured before its closed-form pcurve
- fcb162448 jyviko: brep: the geometry check reads a pcurve at its edge's parameter within the interval's rounding
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 07cb8c7cc jyviko: STEP import: an edge off its face's surface carries its gap as its tolerance
- 21c64fb24 jyviko: tess: an edge loop of fewer than three segments is split until it encloses an area
- 9da3174bb jyviko: solidcraft-smlib: a revolution goes to SMLib as its NURBS form alone
- 31b9410f5 jyviko: solidcraft-smlib: a horn torus to rounding is no ring torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 05f1c6b9a jyviko: Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
- 87e7fe472 jyviko: Tapped holes: a preference keeps metric's major-less-pitch drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9717fab2f jyviko: Tapped holes: Rc and NPT, and a modelled thread with the thread's End
- 72e0e0094 jyviko: Ladder 06/017: the golden entry from a run of the case
- 376a91ad7 jyviko: Hole presets: a modelled tapped thread and its End, and every catalogued size
- b6c3b32a9 jyviko: Tapped holes: an Rc or NPT hole takes the stocked drill under its standard minor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 361b35afe jyviko: Thread: a shoulder thinner than the overrun's reach is still a shoulder
- 5fe141c0f jyviko: Thread: the start never fades; ease_in is gone
- 386598282 jyviko: Thread dialog: the Ends section is Start (None, Chamfer) and End (Square, Fade)
- 80e47130b jyviko: Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c4212c04 jyviko: Thread: the chamfered tip at the start or at both ends
- 75deb73aa jyviko: Thread: ISO 228-1, ISO 7-1 and NPT pipe threads, taper threads by a radial law
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4f6f254d0 jyviko: smlib: a setback left open is a profiler span like every other SMLib call
- 676919d4d jyviko: tess: a face no method plans is filled leniently in (u, v), and named in the stats
- 1acbe2806 jyviko: Fillet dialog: plain words for continuity, Corners with Setback out of Advanced
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b2fc5e1fb jyviko: smlib, kernel: a refused setback corner is named by its point and why
- 855575473 jyviko: SMLib: the prebuilt with setback-open corners and the refused-corner index
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d8282b336 jyviko: doc, engine: corner: g2 sets each corner back for its G2 patch
- 8fbb575a5 jyviko: kernel-cases: a continuity check, and ladder 07/015 graded by it
- 808913777 jyviko: kernel: G2 corners at concave corners, mixed ones refused
- ba38fbd2a jyviko: kernel-cases: ladder 07/019, a concave corner's G2 patch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6263db8d6 jyviko: smlib: Brep::blend_setback_open, set-back corners left open with their holes
- d63a50c47 jyviko: kernel: seam diagnostics give every station's values
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- faffa6664 jyviko: Profiler: the diagnostics.profile test holds while other tests record
- 7fde0bdff jyviko: Profiler: docs/perf.md says how to switch it on and read it
- 29225d2c8 jyviko: geom: fill_matched, a height field G1/G2 to the faces beside its loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 10ea00e74 jyviko: Profiler: every SMLib C API call is a span, timed by the C API itself
- 319c0bc9f jyviko: Profiler: kernel operations and STEP/IGES import stages are spans
- 9cd655259 jyviko: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile
- fafd977b0 jyviko: Profiler: the Profile operations preference switches recording at run time
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6645e2c6 jyviko: Threads: a modelled thread's tangent flank joins are not drawn
- 970c29745 jyviko: Smooth edges: a measured crease is kept apart from a tangent display join
- 541b94a60 jyviko: Smooth edges: hide only joins inside one smooth surface (G2); draw tangent joins
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57d48aa9f jyviko: Clippy: the kernel's and engine's warnings on develop
- b52a01e29 jyviko: Attribution: the hand-written box STL of kernel case 4561
- 15caa50d2 jyviko: CI affected crates: no truck crates are vendored any more
- c95580d04 jyviko: Smooth edges: one G1 rule on exact surfaces and pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d13300b0a jyviko: cargo fmt: the format-40 change and the rebase's export list
- 873124c49 jyviko: CI: develop runs like main; SMLib is fetched after the Rust cache is restored
- 6517d1ee6 jyviko: Arabic and Hebrew catalogs: #4414's thread direction labels out, as in every other catalog
- fddb57c0d jyviko: Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e26dc640 jyviko: The command line and the web app link SMLib by default too
- 826f36a79 jyviko: CI and releases fetch SMLib before building
- 8aea8e5a8 jyviko: Format 40: a thread's hand on tapped holes too; v0.24.0's handedness opens as hand
- 652d3a2cb jyviko: ui: main's browser picks (#4774) read the placed model through session_world
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a57ce13e7 jyviko: thread: a shaft thicker than a modelled thread is refused, never turned down
- 6b9f5e0e4 jyviko: thread: main's screw direction (#4414) out; the thread's hand is the one direction
- 5fc160732 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3e9c70e26 jyviko: Cargo.lock: resolved for the merged manifests
- 6e15b9676 jyviko: engine, kernel-cases: tangent joins out of the corner-pick count; 3383 and 5024 recipes to main's rules
- 46294c7c2 jyviko: kernel: STEP placements by a transformation operator keep its axes and scales
- 3d0f6aa3f jyviko: kernel: IGES trim pieces closed onto their meeting points in main's assembly reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b310512e9 jyviko: kernel-ladder: tier 11 threaded parts grade their geometry
- f6b42d416 jyviko: kernel-ladder: 07/016 is a refusal; 07/018 the same corner with r2; cases.py makes 013
- fb384be9c jyviko: smlib: build against SMLib a15b5a2 (replay of usd-brep 1.0.1 with the fork's fixes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3f771998 jyviko: kernel-ladder: tier 07 corner cases grade their geometry
- 0d7acb0ce jyviko: kernel-ladder: 08/007 grades the rounds run into the chamfer
- c9dcc42a1 jyviko: kernel-ladder: tier 09 shells grade their geometry
- 05e0dc17b jyviko: kernel-ladder: 10/008 grades the vents as four times one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 191b2f4c4 jyviko: kernel-ladder: cases.py makes every committed case again
- 977230b7c jyviko: kernel-ladder: tier 04 cases grade their geometry
- 84473f61f jyviko: kernel-ladder: tier 06 grades the threaded boss; both hands and Tr40x14(P7) added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8edf5b873 jyviko: kernel-cases: the ladder's golden recorded after the thread rework
- 2e1c1097a jyviko: geom: a degenerate point's normal steps into the parameter interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3287bcba9 jyviko: Threads with several starts
- 7bfc184e8 jyviko: A modelled thread's chamfered tip (ISO 4753)
- d433ce2c9 jyviko: Thread runouts: the groove fades out instead of stopping square
- fdede5a0a jyviko: Thread work in rustfmt's layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 610173e1f jyviko: combine: move each tool into its target's frame
- 3fb263d00 jyviko: hole: keep a countersink's tool within its rim above the face
- 1171c4c2a jyviko: A sheet metal body mirrored or patterned into new bodies is sheet metal (#3353)
- 5a9bf4742 jyviko: A converted sheet takes its rule's values at its own thickness (#4328)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 48abbbcc1 jyviko: kernel: a vertex a face's loops pass twice is one point of its (u, v)
- 1df330c79 jyviko: engine: a shell that opens no face makes a closed hollow body
- 5aeff43f8 jyviko: smlib: a horn or spindle torus face comes out as its NURBS form
- bd4e1926a jyviko: kernel-cases: 2928's base extrudes the ring it describes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 903e371fa jyviko: geom: a face's box reaches its boundary's extremes, not its samples'
- cfe1b8b92 jyviko: step: a loop through its surface's pole has its seam
- 0bea4631b jyviko: kernel: IGES trim pieces that miss their meeting point are closed onto it
- 0e6681a2d jyviko: kernel: the largest fitting fillet shrinks only on a refusal as too large
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 237f0ae74 jyviko: kernel, kernel-cases: a convex blend overflowing a cliff is built, with its analytic answer
- 7d300984b jyviko: kernel, kernel-cases: a shell whose walls would meet is refused, saying so
- 3be6ad433 jyviko: kernel: a tangent chain stops where the edges' convexity flips
- 098fac037 jyviko: geom: a face's loops lie in one turn of its periodic surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Bill of materials types: phantom, reference, purchased and inseparable (#3874)
A component's bill of materials type is a part property (`bom_type` in its metadata, set with
component.metadata.set and read by component.metadata, as part_number is), so older releases
keep it and no format change is needed. It isn't a design property: the Design Properties
dialog doesn't list it and document.metadata.set refuses it. A word this build doesn't know
reads as normal and is kept.
assembly.bom counts by type: a phantom has no row and what it holds counts where it is placed,
in the same rows as the same parts there; a reference counts nowhere, and nothing inside it
does; purchased and inseparable components are one row, and in parts only an inseparable
component's purchased parts are listed too. Rows of one part number but different types are
different rows. Rows and children carry bom_type. With no types set the rows are as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: bill of materials and bill of materials type (#3874)
The bill of materials types are a new idea, so the glossary gets their
term, with the five types, and "normal" gets its fourth meaning in the
table of words with more than one meaning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials types: a plain line for each (#3874)
The guide's table and the glossary entry say what each type is for in
plain words: something you make, something just to group, something to
use as a reference, something you buy, something made as one piece.
The names stay the five standard ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: kits fold together only when their contents' types match (#3874)
With group_children, two kits with one part number share a row when what they hold reads the
same. That reading (kit_key) compared each child by part number and count, but not by its bill
of materials type, though rows themselves are told apart by type. So a kit holding a made bolt
and a kit holding a bought one, both KIT, folded into one KIT x2 row listing the first kit's
bolt twice: the other type was lost, and which one depended on creation order. 0xlillith found
it in review of #5107.
kit_key now includes each child's type. Equal part number, type and contents still fold.
Test: two KIT kits each holding a BOLT fold into one row of two; once one bolt is purchased they
are two rows, each listing its own bolt. Planted fault (the type left out of the key): caught.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 773e627b4 jyviko: tess: no edge segment spans more than a quarter turn; loops touching at a vertex close
- 806268714 jyviko: tess: a face's sampled boundary never crosses itself
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A border profile capped every length at 5000 mm (the largest sheet's side) but two: a
centring mark's reach inside the drawing border and a trimming mark's length. A file could
give either a huge whole number, such as 18446744073709551615. The read's number check passes
whole numbers, so the profile took it as 1.8e19 mm, and saving wrote it as a decimal the next
read refused: a drawing that saved but didn't open again. K2's fuzz test of drawing files
(#3890) found it.
Both now take the cap the margins have, `MAX_SIDE_MM`, in `validate`, so the file is refused
when it's read. Layout's own checks against the sheet are unchanged, so a 5000 mm mark still
validates and is refused only on a sheet too small for it.
Tests: the hostile-profile test refuses 5000.000001 mm and 1.8e19 mm for each mark, and takes
5000 mm on its own; 4 planted faults (each cap removed or made one short) are all caught.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The built-in sheet's centring marks now run from the trimmed sheet's edge to the drawing border.
From the grid reference border, as before, a mark was the same length as a grid field mark, and on
A3 it sat on one (the sheet's centre falls on a field edge), so it no longer read as a mark once the
grid reference border's outline is left out (Cameron, after the prototype on #3875).
- DrawingBorderProfile.centring_mark_start: sheet_edge (the built-in's, and when not given) or
grid_border (ISO 5457's figure 5); ISO's full border in the tests asks for grid_border.
- A mark still needs a length: one that stops on the drawing border needs room outside it on the
side it starts from, every margin for sheet_edge, the grid reference border for grid_border.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
geom::paper holds what a sheet shows as plain data: groups of strokes and fills, each group tagged
with the object that drew it (an opaque id) and its kind, with one validation pass over a bounded
record count. Seg2's checks and the coordinate rule move into profile.rs so section and paper share
them, and drawing_sheet takes its side and line limits from paper, so each limit is written once.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* test(oracle): reviewer-aligned parameterized workshop plate fixtures (#4950)
Independent analytic W23 expected values and seven verified models,
including four R10 corners and the 2 mm tangent top chamfer.
Document accepted Drawing states and commit regenerated docs/oracle.md
from successful workflow run #29 (90/90 pass).
* fix(oracle): correct W23 chamfer centroid and clarify drawing session ownership
* Drawing sheets: sizes and the ISO 5457 border (#3875)
A sheet is a paper size and an orientation: ISO A0 to A5, Letter, Legal,
ANSI A to F, architectural A to E1, or a custom size (finite, above 0 and
at most 5,000 mm a side), landscape by default and either way for every
size.
A border profile is the rule for its border, and layout() works it out
for a sheet: the frame inside the margins, and the reference fields with
their labels. The ISO profile has a 20 mm filing margin on the left and
10 mm elsewhere, a 0.7 mm frame, fields of 50 mm out from the centre
lines with the corner fields taking what's left, rows lettered from the
top without I and O (AA, AB and on past Z), columns numbered from the
left, and an A4 sheet labelled on its top and right only. A profile can
divide the frame equally instead, or have no grid.
The records sit in geom, next to the section records, so saving,
rendering and export can all use them. Nothing is saved or drawn yet:
there is no command and no format change. Margins that leave no drawing
space, values that aren't finite, fields outside 1 to 1000 mm, more than
200 equal fields and unknown JSON fields are refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: ISO 5457's centring and trimming marks (#3875)
A drawing border profile now also holds the grid reference border and the
centring and trimming marks, either of which can be left out. The ISO
profile follows ISO 5457:1999 (read in its identical adoption,
IS 10711:2001):
- the grid reference border 5 mm outside the drawing border on every
side, with the field labels between the two;
- four centring marks on the sheet's centre lines, from the grid
reference border to 10 mm inside the drawing border;
- at each corner a trimming mark of two overlapping 10 x 5 mm
rectangles, in the margin outside the grid reference border.
The labelled sides are now a rule worked out for each sheet: ISO 5457's
(the top and right of A4, all four sides of the others) or fixed sides.
So one profile labels every size correctly. validate() checks what
doesn't depend on the sheet, for when a profile is read; layout() calls
it, then checks the rest against the sheet.
Refused:
- a grid reference border that isn't finite, is negative or is wider
than a margin;
- a centring mark that isn't above 0, would reach past the sheet's
centre lines, or is on a drawing border those lines miss;
- a trimming mark that isn't above 0, is wider than it is long, is
wider than the margin left outside the grid reference border, or is
longer than half the sheet's shorter side.
The grid rule's JSON is now externally tagged ("none",
{"from_centre": {"field_mm": 50}}), as the sheet size is, so an unknown
field is refused in every form; the internally tagged "none" ignored
one. Nothing is saved yet, so the shape change costs nothing.
The names follow the glossary, and ISO 5457's "drawing sheets": the
module is drawing_sheet (was sheet, which means sheet metal elsewhere
here), DrawingBorderProfile and SheetLayout (were BorderProfile and
BorderLayout), sheet_border and drawing_border (were paper and frame),
and Sheet::size_mm (was paper_mm). The first part of S1 is still a draft,
so the renames are made here rather than in a commit of their own.
The extra centring marks ISO 5457 asks for on sheets larger than A0
aren't here yet. Still nothing is saved or drawn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a lighter built-in border, the filing margin a choice (#3875)
Cameron's decisions after seeing the sheet in the app, 2026-10-23:
- No trimming marks in the built-in profile: the filled corner blocks
take a lot of ink. trimming_mark_mm stays, so a profile can still ask
for them.
- Centring marks stop at the drawing border: from the grid reference
border to the drawing border, never into the drawing area (on A4 they
crossed the tables). centring_mark_mm keeps its meaning, how far a
mark reaches inside the drawing border, and now takes 0, the built-in
value, as grid_border_mm already takes 0 for "on the drawing border".
A mark of no length (a reach of 0 with no grid reference border) is
refused.
- Margins of 10 mm all round. ISO 5457's 20 mm filing margin on the
left, for drawings that get bound, is a named choice: filing_margin,
off when not given. On, it stands in for margins.left_mm, which is
kept, and still checked, for when it's off again. The 20 mm is
FILING_MARGIN_MM, and validate() and layout() both take the margins
from one helper, laid_out_margins().
A3 landscape is now 400 x 277 at (10, 10), with eight 50 mm columns.
With the filing margin it is 390 x 277 at (20, 10) again, the same as a
20 mm left margin set by hand. A profile with all three choices on
(ISO 5457's full border) lays out exactly as the built-in profile did
before, and the tests keep the old hand values for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 42e50a87c jyviko: smooth edges: tangent joins of planes, cylinders and cones, along straight splines too
- 89e23d1eb jyviko: record: a body built from a sketch has new edges, with no origins
- 8eb93ff06 jyviko: step_in tests: the cube fixture's edges lie on their lines
- 4b418c0d2 jyviko: kernel: how a body's material regions meet, read from the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667ee5665 jyviko: kernel tests: a blend meant to run along a tangent chain asks for it
- 74d02d2a0 jyviko: smlib: the fork with NVIDIA usd-brep 1.0.1 merged (f7f012b)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 306c7b75b jyviko: pcurve: a rim at a steady pace on a spline face, read from the edge itself
- 28e0eea80 jyviko: pcurve: each use's closed form or none, and a kernel's trims for the rest
- 1bf206259 jyviko: STEP and IGES import: SMLib makes the pcurves that have no closed form
- 879958721 jyviko: pcurves: a flat patch's are a plane's; SMLib's sheet loops read either way round
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2883981a0 jyviko: brep: meridians, revolutions and whole turns exact on their forms
- 6c385c843 jyviko: sew, step: face forms from the boundary's extent; trimmed profiles exact
- fd71e6a95 jyviko: kernel: assembled faces and edges on their NURBS forms
- f6f8b28c0 jyviko: Records require NURBS forms on circles, ellipses and curved analytic faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd873bb83 jyviko: sew: an edge folded across a bend gets a Hermite pcurve on the bend's form
- c376e8403 jyviko: step: imported faces and edges on their NURBS forms
- 69702833f jyviko: solidcraft-smlib: ellipse edges on their NURBS form, as circles are (fork 0c5868e)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c5dbf879a jyviko: brep: exact pcurves of forms: cut on planes, along the parameters of spline faces
- a4180ab42 jyviko: sew: faces and edges on their NURBS forms, their pcurves exact
- 57080f88c jyviko: fixup! sew: faces and edges on their NURBS forms, their pcurves exact
- 76a254137 jyviko: sew: a circle on a revolved face is labelled on that face's frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f070eee2b jyviko: brep, kernel: a face's side is read on its NURBS form (#4149)
- 58f60adbf jyviko: kernel: an assembled face keeps its NURBS form
- 807010c49 jyviko: brep: the NURBS forms of lines, circles, ellipses, cylinders, cones, spheres and tori
- f370d1e42 jyviko: brep: forms on their frame's quarter grid, across the seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6892ceac7 jyviko: brep, kernel: code that reads an edge's angles takes them from the circle, code that evaluates takes the NURBS form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b1326e48d jyviko: brep: an edge on a line, circle or ellipse carries the NURBS form SMLib holds it as
- 6adba90e2 jyviko: solidcraft-smlib: circle edges on their NURBS form, SMLib's trims kept on them (fork deec9cb)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e6f993fff jyviko: Revert "kernel: merged topology counts no seam edge (a face on both sides of it)"
- 4ea29e307 jyviko: kernel-cases: 818 counts its two cylinders' seams, as every case counts edges
- de0e5bf52 jyviko: kernel: a tangent chain stops at a smooth edge
- 369c897d8 jyviko: kernel, cli: clippy and the cli tests build again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 84bd2daad jyviko: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default
- d0ff1dcfa jyviko: doc: an extrude's taper without a corner rule picks one per profile
- 5e7aba8df jyviko: loft sections matched to their neighbours
- 2752eee61 jyviko: kernel: merged topology counts no seam edge (a face on both sides of it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b6a3b31ff jyviko: brep: a face on a cylinder, cone, sphere or torus carries the NURBS form SMLib holds it as
- 2e26e0567 jyviko: solidcraft-smlib: the export reads FACE_NURBS_FORM
- 03db54a23 jyviko: solidcraft-smlib: SMLib at the merged fixes: slice, seam check, analytic revolve, draft corners, blend refusal, union of many, NURBS forms (fork 03c14ca)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bcbb99005 jyviko: kernel, smlib: a blend larger than its faces is SMLib's refusal; blends take exactly the given edges
- 13e49e069 jyviko: engine: solid.fillet and solid.chamfer say they blend exactly the edges given
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ffbbc74d jyviko: step: a cone within the file's uncertainty of its limit plane over the face is read as that plane
- 0185ccc1e jyviko: solidcraft-smlib: Brep::union_all, the union of many bodies in one SMLib call
- 0213c3dfa jyviko: kernel: union_all, one SMLib union of many bodies checked once, history over every operand
- 83d965f30 jyviko: doc: a join into one target and an intersection's tools are one union_all call
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 045961445 jyviko: doc: an extrude's taper saves how it closes the profile's corners
- 1b5ca02b8 jyviko: solidcraft-smlib: SMLib's tangent draft corner meets lines at an edge (fork ccc56fd and docs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 09c979a4b jyviko: brep: a full circle in a profile is one closed arc
- 8e6c24aeb jyviko: kernel: a raised band reads its arcs' circles from the record
- d10041743 jyviko: kernel: emboss reads a wall's span from its arc's interval
- 0414f5a7a jyviko: kernel: assemble's unused CurveEval import goes with edge_point
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 99024b368 jyviko: solidcraft-smlib: SMLib at the candidate: solver statuses, range-end refinement, arc sweeps as cylinders (fork 1c8e415)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44744d3aa jyviko: kernel: a face's boundary runs along a pole as its pcurves say
- 01845c189 jyviko: kernel: planar sheets are built one simple loop at a time
- 529c2cf04 jyviko: solidcraft-smlib: SMLib's area counts the faces between solid and void only (fork 8400690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 78937d1db jyviko: brep: one basis-derivative routine, bspline::basis_derivatives
- afce22bb6 jyviko: solidcraft-smlib: mass properties of any body, by its material regions (fork 311946c)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 81cef1c60 jyviko: kernel: a free ruled strip is the exact ruled surface to a far curve of its own
- 9e2c1c57c jyviko: kernel: ruled surface docs and test for the free strip's far curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2a09b9943 jyviko: kernel: the test target compiles: the last tests on the record and SMLib
- 2f83aaa5d jyviko: kernel: clippy's own fixes across the kernel (needless borrows, assign ops, contains)
- f6afec8ea jyviko: kernel: dead code left by the port deleted; clippy -D warnings clean on all targets
- a0e17daa5 jyviko: kernel: cargo fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1b7fda4d3 jyviko: kernel: surfaces and SMLib blends without the smlib feature gate
- e1b9ea10c jyviko: kernel: placement, history, mesh-memo, display and issue tests read the record
- 8237cc927 jyviko: kernel: mesh, lump, loft-rail, untouched-face and intersection-curve tests read the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7646e8ff6 jyviko: kernel: compiles on the record — trim reads the tool's side near its body; mesh memo typed
- 748e796b2 jyviko: kernel: sweep histories attach with no edge origins given
- a5f5809ba jyviko: kernel: a ruled strip's side builder needs no mutable binding
- ee79235f5 jyviko: kernel: surfaces, bridge and loft rails clippy-clean; picked_loop gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9eb68e4 jyviko: solidcraft-step: a record's layout (solids, voids, sheets) and outer loops for every writer
- ed43871f7 jyviko: kernel: IGES export from the record
- 1d4811201 jyviko: kernel: STEP import tests and docs without the deleted face splitting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30ddda306 jyviko: solidcraft-step: write a schema 4 record as ISO 10303-42 topology
- d59bb0084 jyviko: solidcraft-step: revolutions under axis-keeping placements; void shells as the record has them; Reader::frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a8ca6d0f jyviko: kernel: Assembly::finish ends in Brep::canonical
- bd1095fff jyviko: kernel: the general fill's tests read the record; five- and six-sided fills are patches about a centre
- 5aaf405d8 jyviko: kernel: the second-derivative tests check the record's SurfaceEval::second
- 4897ce17b jyviko: kernel: loft rails tests measure against the record's surfaces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 849bb1f24 jyviko: kernel: face sections along a direction as SMLib's exact curves
- 876333480 jyviko: doc: an iso link along a direction on a solid is SMLib's exact section
- d9274aaf1 jyviko: kernel: the point-path sweep test expects the polyline's walls
- 13e9aca7e jyviko: kernel: exact projection, section and iso curves exported; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7b5d732e3 jyviko: kernel: project_onto_face, sketch curves projected onto a face as SMLib's curves
- 0ef5b910f jyviko: doc: a curve projected onto a solid's face is SMLib's projection of the curve
- 95e9a80fa jyviko: kernel: iso_curves, a face's isoparametric curve exactly, trimmed by its loops
- 814475f4f jyviko: doc: an iso curve of a solid's face along u or v is the surface's own curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6d0993817 jyviko: kernel: a ruled strip whose rulings turn along a free-form edge is refused, not fitted
- a6b41dd82 jyviko: solidcraft-smlib: Brep::project_curves, curves projected onto a face as SMLib's B-splines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1708fe0e0 jyviko: brep: Brep::canonical, any record in canonical order
- 98548fe16 jyviko: kernel: one canonicaliser; one tensor sheet
- f8e175273 jyviko: brep: Brep::split_edges, a record's edges split exactly at parameters inside them
- 65e141ac4 jyviko: kernel: stitch splits an edge at another sheet's vertex lying on it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30b02cdfa jyviko: kernel: the solid loft's rails anchored by loft_rails::railed; path curves shared
- 0d611ed84 jyviko: kernel: surface sweeps mitre at corners, as the solid sweep does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c7afe5eb4 jyviko: doc: a lip is SMLib's raised band and a groove its exact rim band, nothing else
- 89423b88e jyviko: doc: a sheet bore is cut once, with the drill clipped to its panel
- f4fa8a407 jyviko: kernel: the touching-face checks, extrusion batching and clearance probe are gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7c0d9b5e8 jyviko: kernel: the general fill on loops of five or more edges, its patches about a centre
- 87907628e jyviko: kernel: surface match on the record, through bridge's record API
- 22fde06a3 jyviko: kernel: loft blend on the record, through bridge's record API
- 7e7193b33 jyviko: doc: the faceted thread groove is gone; the groove is SMLib's exact screw sweep
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- beebf2203 jyviko: kernel-cases: --dumps=DIR leaves each failing SMLib call's inputs for replay
- 83c0f4e2c jyviko: AGENTS.md: SMLib is the kernel; no switch, no other kernel
- 1b27c134d jyviko: kernel: an intersection curve is where SMLib's imprint cuts, exactly
- 9398b2586 jyviko: kernel: intersection edges exported from the crate root
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e00645ca5 jyviko: kernel: crate root follows the split, surfaces and SSI ports
- 252b2947a jyviko: kernel: mesh bodies built by Body::of_mesh; fuzz booleans have no fallback counts
- 0013249c4 jyviko: kernel: Patch of a body's edges is fill's patch with no crown
- 08f061b02 jyviko: kernel: boundary surfaces on the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9b5e0a8b4 jyviko: kernel: T-spline sheets as record faces; NURBS faces on the record
- 5c1b335e1 jyviko: kernel: bridges read their support faces on the record
- b5a7d52b7 jyviko: kernel: bridges and surfaces read the body's own record
- c83bd8f94 jyviko: kernel: T-spline and offset tests read the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6fb1af00 jyviko: kernel: an arc's knots built without a borrowed temporary
- d3ca6e089 jyviko: kernel: loft rails on exact NURBS sections, the last section met where the rail ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0cbd9e19d jyviko: kernel: profile segments as exact schema 4 edge curves and pcurves
- e1326f37f jyviko: solidcraft-smlib: Brep::stitch and Brep::offset_sheet, and the fork pinned at e3d478d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 585334a29 jyviko: kernel: planar source lineage on the record, coplanar faces joined by SMLib
- 5c16e8dd1 jyviko: kernel: coplanar faces joined by SMLib's merge_faces, the record read from the body
- c802458ef jyviko: solidcraft-smlib: Brep::face_points, a point inside each face (smlib_face_points)
- 453a4dec7 jyviko: kernel: a trimmed piece's side is read at a point inside it, exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e520c9d42 jyviko: kernel: a body's record may be a surface body of open shells
- befcfecb7 jyviko: solidcraft-smlib: Brep::split_faces and Brep::split_body on the fork's split shims
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5d783066 jyviko: kernel: outline_union deleted, a retry of the old boolean with no caller left
- 25b128698 jyviko: kernel: crate root follows the query-module port; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- abf46cc21 jyviko: kernel: clearance reads each face's surface from the schema 4 record
- f53405d6b jyviko: kernel: plane_fit fits and certifies planes on the schema 4 record
- bd956b88a jyviko: kernel: spline_conv makes record curves, surfaces and tensor sheets
- abb7c37d8 jyviko: kernel: face_params deleted; a face's boundary in its parameters is the record's pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e463eabb6 jyviko: kernel: topo reads each face's surface from the schema 4 record
- 80e34cc8c jyviko: kernel: surface_kind reads faces and edges off the schema 4 record
- b0ad6f62b jyviko: kernel: body distance projects onto the schema 4 record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3ef93b363 jyviko: kernel: the general fill is the iso-parametric patch on three or four edges
- cfb5dc3ba jyviko: solidcraft-smlib: Brep::planar_faces and Brep::boolean2d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fa086dd5 jyviko: kernel: record.rs records history on the schema 4 record, by index
- c5c411de5 jyviko: kernel: an assembled record is the body; its history through record::attach
- 796d3e7d2 jyviko: kernel: boolean_record composes histories; healing is heal's
- f56a94eac jyviko: kernel: exact path helpers exported; SMLib pinned at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 166bfbacd jyviko: brep: records of bodies apart from each other join into one; islands stay inside their voids
- 065e61ec7 jyviko: kernel: Body is its schema 4 record, with its SMLib body made once
- 22734a55f jyviko: kernel: trim on the record: split, side by the tool's field, pieces removed
- 7bbdd3713 jyviko: kernel: untrim on SMLib (smlib_untrim_face), its history from SMLib's tags
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1d289dfd6 jyviko: kernel: fairing works on record curves and surfaces; fair_faces rebuilds through SMLib
- f9f59d826 jyviko: brep: SurfaceEval::second, a record surface's exact second partial derivatives
- 748d9f25e jyviko: brep: CurveEval::derivs, a record curve's point and first derivative
- e01018839 jyviko: kernel: seam continuity measures the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9f71e93e2 jyviko: kernel: Delete Face with healing on the schema 4 record
- 3bd1cc534 jyviko: solidcraft-smlib: Brep::merge_faces, SMLib's removal of topological edges and vertices
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cbf28a4fd jyviko: kernel: the prism boolean modules are gone from the crate root
- 9268a1e88 jyviko: solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b11433bc5 jyviko: kernel: smooth display edges classified on the schema 4 record
- 3ca3638c5 jyviko: kernel: the curve, loop and vertex blend modules are gone from the crate root
- b0cc84b28 jyviko: brep: a record moved rigidly, exactly
- fa3d914af jyviko: kernel: SMLib measures mass properties at its documented 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6e17d26dd jyviko: brep: a spline's closedness is worked out once, not on every evaluation
- 51d7fc413 jyviko: kernel: IGES trimmed surfaces close their loops and split into separate bodies
- f71cb3d99 jyviko: engine: revolve about a construction axis given by name
- 85da7d6c2 jyviko: engine: count a face pick's work as it is done
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d61efb306 jyviko: kernel: a face's boundary takes its (u, v) from the record's exact pcurves
- 4b8edef06 jyviko: kernel: the tessellator's tests plan the body's schema 4 record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667cd3356 jyviko: solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
- e57f2f2a5 jyviko: brep: a face's points search one grid of its surface, made once
- 1bc0df6d0 jyviko: doc: a join of many tools into one target unions them in a balanced tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69a7a85cb jyviko: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cac7d6eff jyviko: kernel-cases: the hollow ball of case 450 has two shells
- faae48d6e jyviko: solidcraft-smlib: Brep::loft_to_point, and the fork pinned at 0294982
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 520d934fe jyviko: kernel: SMLib sweeps that twist, scale or follow rails, railed lofts, and paths of points
- f870ecb87 jyviko: solidcraft-smlib: pin the fork at ffaf4e8, offset merge and intersection-edge ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e1a257169 jyviko: kernel-cases: SOLIDCRAFT_KERNEL=truck grades as the default kernel
- 1336352a4 jyviko: solidcraft-smlib: pin the fork at 2d7c7ed, the second round of SMLib C++ fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a630daee jyviko: tess: a hole in a closed face lies in its outer loop's period
- 693cba4e2 jyviko: kernel: a curved strip straight across and narrower than a side is its boundary nodes alone
- 20d4b1f4e jyviko: kernel: a spline wall winding round an axis sends its body to the display plan for meshing
- 5ed1e95a4 jyviko: kernel: a cut grid past the grid cap thins its lines instead of giving the face to Delaunay
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69ad1ae45 jyviko: solidcraft-smlib: the curve list carries nothing in a build without SMLib
- 1a5e60349 jyviko: brep: a point's parameters on a spline winding several turns are found on its own turn
- e1c631dd3 jyviko: brep: a pcurve keeps its tangent where its curve is smooth through a full knot
- 829d161f6 jyviko: brep: the projection runs Newton from up to 32 starts, nearest first, until one lands
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02bfd6e10 bherbruck: kernel: draft through SMLib
- d20e91f8c jyviko: doc: re-anchor a stored face pick strictly inside its named face
- 36b7aa267 jyviko: solidcraft-smlib: a build without SMLib keeps the sweeps' curve lists without a dead-code error
- d22e89bcc jyviko: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 714475b84 bherbruck: kernel: measure through SMLib's exact mass properties, checked against the mesh
- 07c36cfd0 bherbruck: solidcraft-smlib: Brep::chamfer_sides, and Error::Unsupported for a radius law with a corner
- ae1d746ae bherbruck: kernel: chamfers with two setbacks through SMLib
- a043e4ae2 bherbruck: kernel: an SMLib blend's corner patch comes from the edges meeting there
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8fde178fe Brennen Herbruck: kernel: any schema 4 record into SMLib with its order, healed where refused
- 5014c4f17 Brennen Herbruck: kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies
- 8ad09ec64 bherbruck: smlib export: a face's loop crosses its poles where the face's parameter box says
- f4da25243 bherbruck: solidcraft-smlib: the fork at bf7c272, whose operation results hold their own gaps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 96bdbbf3b bherbruck: docs: SMLib vs truck triage of the sweeps, threads and shell cases
- 82fe0e59e Brennen Herbruck: solidcraft-smlib: Brep::imprint
- 7e208529c Brennen Herbruck: solidcraft-step: each record face names its face in the file
- 863afb5e3 Brennen Herbruck: solidcraft-smlib: an arc past a full turn goes to SMLib a turn back
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- baae4ee19 jyviko: kernel: fillets and chamfers through SMLib when SOLIDCRAFT_KERNEL=smlib
- f73d40383 jyviko: kernel: an SMLib blend pick at a seam's end takes the sharp edge there
- 1d8299aed jyviko: kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 29d307bdc jyviko: doc: a modelled thread through SMLib cuts the exact groove
- 5dd3acdec Brennen Herbruck: kernel-cases: on the kernel branch a thread off its hole or shaft size is refused
- b900d6d46 jyviko: kernel: solids an SMLib boolean leaves touching come back as separate solids
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0f3d6f177 jyviko: kernel: shell, offset faces and thicken through SMLib, with SMLib's history
- 82865e283 jyviko: kernel: a body SMLib walks some loops of the other way keeps its order
- 6bfbe1041 jyviko: kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d672cfa01 jyviko: kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation
- f35f06d98 jyviko: kernel: a revolution that is no analytic surface goes into SMLib as its B-spline
- a6ca4e0dd jyviko: AGENTS.md: one switch, SOLIDCRAFT_KERNEL, in place of the booleans-only note
- 51211ad1f jyviko: solidcraft-smlib: offset faces, thicken, and NoRoom for walls with no room
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e35b4d744 jyviko: kernel: revolutions of a line square to the axis go into SMLib as planes
- 00e43aacc jyviko: kernel: an operand SMLib's check refuses goes through SMLib's healer
- 94c159825 jyviko: kernel: SMLib's round faces decode as truck's own revolutions are laid out
- ff0f7ccfa jyviko: kernel: a body's record for SMLib takes a larger tolerance where an edge needs it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b27751d43 jyviko: kernel: planes go into SMLib as its planes; analytic angles start at zero
- 640d3d9ea jyviko: kernel: truck's extruded circles go into SMLib as its cylinders
- 1980f9743 jyviko: kernel: SMLib's export keeps every face of a void's shell
- c344801cc jyviko: kernel: note that the engine's and CLI's `smlib` features reach SOLIDCRAFT_BOOLEANS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5238840bc jyviko: kernel: booleans through SMLib behind SOLIDCRAFT_BOOLEANS, with SMLib's history
- d271add1a jyviko: kernel: revolutions go into SMLib as its cylinders, cones, spheres and tori
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c992630e1 bherbruck: ATTRIBUTION.md: rows for the kernel rig's STEP import fixtures
- b90a5851c jyviko: kernel: open a half sphere's loop at its pole, so its seam closes
- 54542890d jyviko: kernel: hold every display-plan triangle to the chord tolerance
- f7336497f jyviko: AGENTS.md: the kernel does geometry, sugar lives above it
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 201ca9a81 Brennen Herbruck: smlib tests: score SMLib's GlobalSurfaceIntersect on the SSI corpus
- f8b48d0e4 Brennen Herbruck: smlib: pin the fork at 70e1bf5 (capi: surface/surface intersection)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17eafa2d4 Brennen Herbruck: solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
- 1edeb2a6f Brennen Herbruck: tests: SSI corpus fixtures (119 cases with exact truth)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 58ce14f45 bherbruck: kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
- e809edd33 Brennen Herbruck: kernel-cases: thread cases that are slow by nature get 600 s
- 8cb976b9b bherbruck: kernel-cases: watertight checks the display mesh, welding vertices by distance
- 3feb9ba2c Brennen Herbruck: kernel-cases: tessellation cases from mesh-hole reports grade watertightness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 35ebc816b jyviko: kernel-cases: a missing capability's message is the case's own text
- 248fee75b jyviko: ladder: every ladder run measures one case at a time
- e1575385b Brennen Herbruck: kernel-cases: a thread off its hole or shaft size is refused
- d7381a1fa bherbruck: kernel-cases: threads fit a hole or shaft off the thread's size again
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75aa8acb6 Brennen Herbruck: kernel-cases: sweeps skipped sources (72)
- 678a70da2 bherbruck: kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- c24b066d2 bherbruck: kernel-cases: an outcome for geometry with no single manifold answer
- 8764a76ff Brennen Herbruck: kernel-cases: threads cases from #1995 and #3368 (finely faceted booleans), skipped #987#3130#3824
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a9002968f Brennen Herbruck: kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e71db662 Brennen Herbruck: kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739524a17 Brennen Herbruck: kernel-cases: sweeps lofts from #271-#3412 (zig-zag pairing, ring sections, flush joins and cuts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce201eea1 jyviko: kernel: SMLib spheres cut by a boolean decode oriented and meshed
- 62142ef38 jyviko: brep: a revolution of a closed profile is periodic along it
- 62124a711 jyviko: kernel: spline edges on part of their curve load as that piece
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a7c0109ea Brennen Herbruck: kernel: boolean runner grades the seeds against a reference volume
- 7bb74d1c6 bherbruck: kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ac6ddbdbe jyviko: kernel: boolean runner times both kernels and runs the cut sequence
- 79ae117dd jyviko: kernel: boolean runner measures SMLib's results again on truck
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 27e996c44 jyviko: brep: splines closed on themselves are periodic for pcurves and tessellation
- 204b650d9 jyviko: brep: check_geometry refuses loops that enclose no area or turn the wrong way
- 19cf3d94a jyviko: brep: orientation, not position, tells a face's outer loop
- 2196129f1 jyviko: kernel: side-by-side boolean runner calls SMLib's boolean
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5b8d89abd Brennen Herbruck: kernel: schema 4 STEP records of revolved and conic-bounded parts against closed-form volumes
- c35fd77f6 jyviko: solidcraft-smlib: rebuild SMLib when its own sources change
- 734883bdb jyviko: solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d41ae8512 Brennen Herbruck: solidcraft-step: surfaces of revolution and extrusion, offset surfaces, hyperbola and parabola edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0bad4161 bherbruck: solidcraft-smlib: check test on every primitive
- 7050e9cfc bherbruck: solidcraft-smlib: mass properties of every primitive against closed forms
- 4983b8872 Brennen Herbruck: kernel: the boolean runner builds every SMLib operand
- acff340a0 Brennen Herbruck: solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 161832976 jyviko: AGENTS.md: unsafe in the SMLib FFI module and its child modules
- 25d2056a2 jyviko: brep: a seam from pole to pole gets pcurves a period apart
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b85b51e81 Brennen Herbruck: solidcraft-smlib: blend faces come from the edge they replace
- 4a6494b48 jyviko: brep: check_geometry, the geometric agreement of a record
- 570028f31 jyviko: brep: the truck adapter checks a record's geometry before decoding it
- 30f5e617c jyviko: brep: document check_geometry in the validation section
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd80377dd Brennen Herbruck: solidcraft-smlib: face and edge history out of SMLib operations
- 4a4e11ef7 Brennen Herbruck: kernel: a side-by-side runner for truck and SMLib booleans
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60aa5e697 jyviko: solidcraft-smlib: build every C API source file
- 3c0b53935 jyviko: solidcraft-smlib: read SMLib's log lines inside the FFI module
- 858f2c3bd jyviko: solidcraft-smlib: the C types are imported only when SMLib is built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 692fba51a jyviko: naming: say how to re-record the corpus names
- a8c8f8832 jyviko: naming: list removed lines before added ones in the corpus diff
- 1d4916008 jyviko: brep: a surface point's parameters move to geom
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 099026d94 jyviko: kernel: fitted pcurves on curved surfaces, unwrapped and closed per wire
- c7088fac9 jyviko: kernel: pcurve tests for seams, poles and loop orientation, and pictures
- 0d026e975 jyviko: kernel: pcurve fits start from four samples per span
- 4afbe3b90 jyviko: kernel: pcurve test for a face round its surface without a seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7024ceec8 jyviko: CI: no runs for pull requests into kernel-smlib for now
- 92d433ca9 jyviko: AGENTS.md: the kernel-smlib branch's rules (ADR 0002)
- ee5deffaa jyviko: brep: Curve2 pcurve type and the truck pcurve entry point
- 26ab8981d jyviko: kernel: exact pcurves of lines and splines on planes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-20 22:53:02 -04:00
4304 changed files with 378869 additions and 110779 deletions
# Dependabot bumps are checked by CI; skip CodeRabbit reviews on them.
ignore_usernames:
- "dependabot[bot]"
path_instructions:
- path:"**"
instructions:|
Project rule: don't change anyone's existing defaults unless the change is purely additive and belongs in the application.
Flag any change to something a user already relies on: a default setting or preference value, what a command or tool does when used the usual way, the UI's default layout or behaviour, a keyboard or mouse shortcut, or the result an existing saved design rebuilds to.
Don't flag purely additive changes: a new command, a new setting whose default keeps today's behaviour, or a new option that appears only when someone chooses it. Don't flag bug fixes that only turn a crash or an error into the result the feature always promised.
When you flag one, start the comment with "Changes a default:", say what a user sees before and after, whether a setting keeps the old behaviour, and whether the PR description's `Changes a default:` line says so.
pre_merge_checks:
custom_checks:
- name:"Existing defaults unchanged"
mode:"warning"
instructions:|
Pass if the pull request changes no default a user already relies on (default setting or preference values, what a command or tool does when used the usual way, the UI's default layout or behaviour, shortcuts, or the result an existing saved design rebuilds to), or if its changes are purely additive.
Fail otherwise, naming each changed default and what a user sees before and after. Also fail if the description says `Changes a default: no` while the code changes one.
# `ci` job still runs and reports the commit's real result (see the `ci` job): the merge queue
# reads `ci` from the newest run of a commit, so a run without it would block a PR that passed.
# Cross-compilation is opt-in through Run workflow; release builds remain in release.yml.
# The release gate (release-gate.yml) calls this workflow (workflow_call) as a Run workflow with
# cross-compilation on.
# Every Linux job runs on Blacksmith's Ubuntu 24.04 runners (blacksmith-<N>vcpu-ubuntu-2404), sized
# per job: 32 vCPU for the tests, 16 for Clippy, the GPU path tests, the archive build (nightly) and the merge queue's, 8 for compiles, doc and reference tests, 4 for the light checks, 2 for Select checks and ci.
# The Windows shader job runs on Blacksmith's Windows Server 2025 runners (blacksmith-8vcpu-windows-2025);
@@ -50,10 +52,14 @@ on:
# only (other labels are skipped, see the top of this file).
# Pull requests test the affected packages (scripts/ci/affected.py).
scope=(--workspace)
if [ "$FULL" != true ]; then scope=(); for p in $PACKAGES; do scope+=(-p "$p"); done; fi
status=0
# The GPU path tracer's tests run in their own job (GPU path tests): one at a time, they
# took about 36 of this job's 45 minutes.
# A failed test does not fail the step by itself: the tests known to fail today
# (tests/KNOWN_FAILING_TESTS) may fail, any other fails it, and so does a listed test
# that passes. nextest's exit code 100 is "tests failed"; any other is its own error
# (a build error, a bad filter) and fails the step at once.
status=0
cargo nextest run "${scope[@]}" --cargo-profile ci --locked --profile ci --no-tests=pass \
--ignore-default-filter -E "($base) & not (package(=solidcraft-gpu) & test(/^path::/))" || status=1
if [ "$status" != 0 ]; then
# A failed golden gets the hint to re-record it (junit.xml lists the failures).
if [ -f "$junit" ] && tr '\n' ' ' < "$junit" | grep -q '<testcase name="tests::robustness_goldens::[^"]*"[^>]*>[[:space:]]*<failure'; then
echo "::error::A robustness golden changed. If the new result is intended, re-record it in this pull request and say why:"
echo "::error::ROBUSTNESS_GOLDENS_BLESS=\"why it changed\" cargo test --profile ci -p solidcraft-engine --lib robustness_goldens:: (see docs/robustness.md)"
fi
exit 1
fi
--ignore-default-filter -E "($base) & not (package(=solidcraft-gpu) & test(/^path::/))" || status=$?
if [ "$status" -ne 0 ] && [ "$status" -ne 100 ]; then exit "$status"; fi
@@ -10,6 +10,8 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
- No GPL/LGPL/AGPL code, not even reading it (OpenCASCADE, FreeCAD, SolveSpace, CadQuery, LibreCAD, QCAD): `cargo xtask licences --check`.
- Every asset is original or openly licensed with a row in ATTRIBUTION.md; read `assets/AGENTS.md` before icon work: `cargo xtask assets`, `cargo xtask icons`.
- Never crash: no unwrap/expect/panic/unsafe in non-test code (unsafe allowlist in crash-safety), errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
- Model decisions (what an operation does, which bodies it touches, which face or edge a point or name means, depths, nearness) use exact geometry; a mesh is for display, export, previews and mesh bodies (`xtask/mesh-decisions.txt` only shrinks): `cargo xtask mesh-decisions`.
- New kernel cases go to solidcore: `cargo xtask lists`.
- Everything is a command and programmatic calls never open dialogs: `skills/solidcraft-commands/SKILL.md`.
@@ -103,6 +103,22 @@ Editable drawing code, native projects and shipped exports are collected under `
| tests/step-conformance/tiny_pin.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/torus_ring_nurbs.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/washer.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/kernel-cases/import/1721-closed-bspline-tube-face/input.step | step-conformance contributors | copy of tests/step-conformance/cylinder_nurbs.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#1721 | CC0-1.0 |
| tests/kernel-cases/import/2043-outer-bound-opposing-surface-sense/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#2043 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/258-cone-point-vertex/input.step | step-conformance contributors | copy of tests/step-conformance/cone_point_vertex.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/258-cone-to-point/input.step | step-conformance contributors | copy of tests/step-conformance/cone_point.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/258-tiny-pin/input.step | step-conformance contributors | copy of tests/step-conformance/tiny_pin.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/3098-bspline-edges-over-tiny-knot-span/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3098 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3208-extruded-ellipse-face-over-parameter-seam/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3208 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3352-vertex-off-its-edge-curve/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3352 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3730-void-oriented-shell-false/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3730 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3880-cylinder-seam-edge/input.step | step-conformance contributors | copy of tests/step-conformance/cylinder_seam.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#3880 | CC0-1.0 |
| tests/kernel-cases/import/3880-nurbs-hemisphere-dome/input.step | step-conformance contributors | copy of tests/step-conformance/dome_nurbs.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#3880 | CC0-1.0 |
| tests/kernel-cases/import/3963-closed-spline-edge-vertex-past-start/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3963 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4005-cylinder-written-as-near-zero-cone/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#4005 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4006-plane-written-as-cone-of-nearly-right-angle/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#4006 | MIT OR Apache-2.0 |
| tests/ssi-corpus/cases/*.json.gz, tests/ssi-corpus/LICENSE-MIT, tests/ssi-corpus/LICENSE-APACHE | ssi-corpus contributors (jyviko) | 119 surface/surface intersection cases with exact ground truth from https://github.com/jyviko/ssi-corpus (cases/data, b04c8a6), gzip-compressed, unchanged; SSI scorer fixtures (tests/ssi-corpus/README.md) | MIT OR Apache-2.0 |
| tests/ssi-corpus/cases/y23_*.json.gz | Yang, Jia and Yan (paper authors: published surfaces, figures and topology); ssi-corpus contributors (reconstructions and truth) | 25 cases built from Yang, Jia & Yan 2023, "Topology Guaranteed B-Spline Surface/Surface Intersection", ACM Transactions on Graphics 42(6), Article 211; each cites the paper in its `source` field | CC-BY 4.0 (paper); MIT OR Apache-2.0 (case files) |
| tests/step-regressions/rod_doubled_edge.step | SolidCraft contributors | written by SolidCraft from the commands of #4598 (a bored rod moved 100 mm and exported); import regression fixture | MIT OR Apache-2.0 |
| tests/oracle/17-loft/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/17-loft/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
| tests/oracle/23-bracket-multifeature/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/23-bracket-multifeature/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
@@ -229,6 +245,18 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/icons/ui/design/svg/flat/plus.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/pan.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/perspective.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_appearance.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_assistant.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_design.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_general.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_graphics.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_layout.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_mouse3d.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_navigation.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_plugins.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_shortcuts.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_sketch.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/prefs_tools.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/redo.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/save.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/settings.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
@@ -755,6 +783,10 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| docs/design/preferences/figures/view-shadow.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| `assets/locales/pending/sketch-offset-instances.json` | SolidCraft contributors | Original offset instance-count label and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/settings_profile.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original analytic head and shoulder geometry for settings profiles | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4561-convert-box-mesh-with-a-zero-area-triangle/box-degenerate.stl | SolidCraft contributors | synthetic ASCII STL written by hand: a box with one zero-area triangle, for the kernel regression case of tangency-labs/solidcraft#4561 | MIT OR Apache-2.0 |
| assets/locales/pending/theme-blur-ui.json | SolidCraft contributors | Original blur controls, notices and translations | MIT OR Apache-2.0 |
| crates/ui-egui/tests/fixtures/theme-blur.json | SolidCraft contributors | Original theme for blur option scenarios and manager review | MIT OR Apache-2.0 |
| assets/locales/ka.json | David Machakhelidze (devius) | Original Georgian translation of SolidCraft's English catalog, written with Claude Code from the meaning of each English string; terminology and doubtful strings decided by a native Georgian speaker; no commercial CAD text used | MIT OR Apache-2.0 |
## Code adapted from sibling projects
@@ -794,6 +826,15 @@ in THIRD-PARTY-LICENSES.txt; no images or artwork from that project are copied.
The glTF test files are built by the tests themselves (crates/io/src/gltf_in_tests.rs,
crates/engine/src/tests/gltf_import.rs); no third-party models are committed.
## Geometry kernel crates
| Crate | Used for | Licence |
|---|---|---|
| solidcore (https://github.com/tangency-labs/solidcore, pinned by rev in Cargo.toml) | the Rust port of NVIDIA's SMLib: the B-rep kernel behind crates/smlib | Apache-2.0 (its NOTICE credits NVIDIA's USD BRep) |
Linked as a crate; no code from it is copied into SolidCraft. Its licence text and NOTICE go
into THIRD-PARTY-LICENSES.txt when `main` regenerates it.
## FreeCAD and Rhino import library
FreeCAD `.FCStd` and Rhino `.3dm` files are read with [cadmpeg](https://github.com/cadmpeg/cadmpeg)
@@ -809,17 +850,13 @@ copied into SolidCraft.
| SolidCraft file | Original contribution | Licence |
|---|---|---|
| crates/ui-egui/src/viewport.rs (`nearest_quarter_turn`, `axis_view_orbit`) | N3MI-DG's [PR #101](https://github.com/bherbruck/solidcraft/pull/101): [minimal TOP/BOTTOM turns](https://github.com/bherbruck/solidcraft/commit/c28e780f52490784ef5886f094b9d3f6d10c3e3f) and [drag-to-orbit](https://github.com/bherbruck/solidcraft/commit/f30b30be6ecc4e2e6544a851243137c01a354934), adapted to the axis gizmo | MIT OR Apache-2.0 |
| crates/smlib/src/core/offset.rs (`draft`: the tilted planes and `SmBrep::LocalOperation`, the tail of the capi's `draft_faces`) | ablasik's `draft` in `crates/smlib/src/ffi/rs_ops2.rs` on [ablasik/solidcraft `app/solidcore-backend-on-develop`](https://github.com/ablasik/solidcraft/blob/9c7e8e31565e1823f0591b58e2967351c32af13f/crates/smlib/src/ffi/rs_ops2.rs), adapted to `core::offset`'s errors and checks | MIT OR Apache-2.0 |
## Vendored third-party code
| Directory | Source | Licence | Changes |
|---|---|---|---|
| vendor/accesskit_macos | accesskit_macos 0.26.3, https://github.com/AccessKit/accesskit (The AccessKit contributors) | MIT OR Apache-2.0 | the subclassing adapter and its tests from 0.27.2: dropping the adapter keeps AppKit's key-value observers (vendor/README.md) |
| vendor/truck-shapeops | truck-shapeops 0.4.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | robust meshing and nearest-parameter fallback in booleans; degenerate intersection-curve rejection; face and edge history of booleans; trace macro; corner choice at vertices several intersection curves end on; reuse of an operand's meshes (vendor/README.md) |
| vendor/truck-geometry | truck-geometry 0.5.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | intersection curves divided from their neighbours' surface parameters; surface second derivatives (vendor/README.md) |
**Kernel cases go to solidcore.** A case that checks a kernel operation (a boolean, a blend, a
shell, a sweep, an import's geometry) is a new entry in solidcore's corpus,
`crates/solidcore/tests/kernel_cases/<area>/` in
[tangency-labs/solidcore](https://github.com/tangency-labs/solidcore), with an answer in closed
form or exact. Draft it as a rig case here, export it with
`cargo xtask kernel-cases --area <area> --export DIR`, add `DIR/<area>/<case>.json` and its
`.bodies.json.gz` there, and delete the draft; or write the entry by hand as that folder's README
describes. `tests/kernel-cases/` takes no new cases: its `CASES` list only shrinks
(`cargo xtask lists`). App-level cases (what a command does, the UI, product rules) stay in
SolidCraft, as tests in their area's existing test file or UI scenarios.
The naming corpus checks persistent names: every name a corpus design stores still finds a face or
an edge, and two builds name its faces and edges alike
(`cargo test --profile ci -p solidcraft-cli --test naming_corpus`).
[docs/mutation-testing.md](docs/mutation-testing.md) shows how to find kernel behaviour these
black-box suites miss.
@@ -222,8 +236,7 @@ Pull requests skip a few heavy tests (one to twelve minutes each), which run in
Check that validation after merging. They are listed in
`.config/nextest.toml` and the [testing page](docs/book/src/dev/testing.md):
- `solidcraft-engine`: `tests::hostile_params_never_panic`, everything in `tests::robustness` and
the seeds of `tests::robustness_goldens` (`seed_00` … `seed_95`; pull requests that change the kernel, truck or the goldens run all but the slowest, `SLOW_SEEDS` in `ci.yml`),
- `solidcraft-engine`: `tests::hostile_params_never_panic`, everything in `tests::robustness`,
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n";
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--profile-out trace.json] [--json-out FILE] [--allow-errors] [--validation each_step|each_feature|off]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--validation: when SMLib's full check runs on the features computed (diagnostics.validation), default each_feature)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n (--profile also records where the time goes, SMLib's calls, kernel operations, features, commands and import stages,\n and prints the table to stderr: count, total, self time and longest per span; --profile-out FILE writes the spans\n as a Chrome trace for chrome://tracing or ui.perfetto.dev; SOLIDCRAFT_PROFILE=1 does the same for any command)\n";
/// `eval`'s lines in the usage.
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n";
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] [--profile] [--profile-out trace.json] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n (--profile and --profile-out as for run)\n";
/// `script`'s lines in the usage.
constUSAGE_SCRIPT: &str=" solidcraft-cli script <design.sc|script.json> [--out script.json]\n (the design's history as a command script that eval and run replay)\n";
/// `bench-open`'s lines in the usage.
constUSAGE_BENCH_OPEN: &str=" solidcraft-cli bench-open <design.sc | part.step> [--parse-only] [--save OUT.sc] [--display LEVEL [--edit NAME EXPR]] [--ops script.json]\n (--ops: after opening, run each command of the script and undo it, timing the command, the\n evaluations it caused and the view it leaves: placing and meshing what changed)\n";
constUSAGE_BENCH_OPEN: &str=" solidcraft-cli bench-open <design.sc | part.step> [--parse-only] [--save OUT.sc] [--display LEVEL [--edit NAME EXPR]] [--ops script.json] [--profile] [--profile-out trace.json]\n (--profile and --profile-out as for run)\n (--ops: after opening, run each command of the script and undo it, timing the command, the\n evaluations it caused and the view it leaves: placing and meshing what changed)\n";
constUSAGE_SNAPSHOT: &str=" solidcraft-cli snapshot <script|design> [--in design.sc|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27]\n solidcraft-cli snapshot --in <design.sc|part.step> --out shot.png ...\n (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n it shows) and color #rrggbb, either or both, once per body;\n --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n is visible inside the material it meets; a later --body overrides it;\n --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON)\n";
constUSAGE_SNAPSHOT: &str=" solidcraft-cli snapshot <script|design> [--in design.sc|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27] [--quality coarse|normal|fine|ultra]\n solidcraft-cli snapshot --in <design.sc|part.step> --out shot.png ...\n (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n it shows) and color #rrggbb, either or both, once per body;\n --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n is visible inside the material it meets; a later --body overrides it;\n --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON;\n --quality: the display quality the bodies are meshed at, as the app's setting (default normal))\n";
constUSAGE_KERNEL_CASES: &str=" solidcraft-cli kernel-cases <case-dir>... [--json] [--dumps=DIR] [--export=DIR] [--validation=each_step|each_feature|off]\n (the kernel regression rig, tests/kernel-cases, on SMLib; --dumps: each case's\n failing SMLib calls leave their inputs for replay in DIR/<area>-<case>; --export: each case's\n kernel operations, input records and expected values for solidcore's rig, in DIR/<area>/<case>.json; --validation: when SMLib's\n full check runs (diagnostics.validation), default each_feature)\n";
out.push(format!("{n} at {x:?}, then {m} at {y:?}"));
}
}
for((r,_),(q,_))ina.refs.iter().zip(&b.refs){
ifr!=q{
out.push(format!("{r}, then {q}"));
}
}
ifa.refs.len()!=b.refs.len(){
out.push(format!("{} stored names, then {}",a.refs.len(),b.refs.len()));
}
out.truncate(cap);
out
}
/// Designs whose names differ from one build to the next today: (design, why). Their
/// differences are printed, not failed on, until the cause is fixed; a stored name that finds
/// nothing still fails.
constUNSTABLE: [(&str,&str);1]=[(
"regressions/closed_sweep_torus_cut",
"the halves of each swept wall lie level along every axis, so which is `#1` and which `#2` follows the order the kernel gives the faces in, which changes from one build to the next",
| AppImage | Uses the Linux 256 px image and `.DirIcon` alias |
| FreeBSD | Shares Linux hicolor images and freedesktop metadata |
| Web | HTML/Trunk and `manifest.webmanifest` stay in `apps/solidcraft-web/`; copies Japanese font/licence to `fonts/`, uses the collected CSS, and copies the Linux 32/256/512 px images to `icons/` for the favicon and installed app |
| Web | HTML/Trunk and `manifest.webmanifest` stay in `apps/solidcraft-web/`; copies the Japanese font/licence to `fonts/` and the Noto Sans Arabic, KR, SC and TC fonts with their licences to `fonts/<family>/` (fetched when a drawing's text needs them), uses the collected CSS, and copies the Linux 32/256/512 px images to `icons/` for the favicon and installed app |
| Docs and link previews | `xtask book` copies the shared card to the existing `/solidcraft/og.png` public path |
"Move holes by clicking or dragging":"تحريك الثقوب بالنقر أو السحب",
"Move holes by clicking or dragging":"التحريك بالنقر أو السحب",
"Move later":"نقل إلى الأحدث",
"Move up":"نقل للأعلى",
"Name":"الاسم",
@@ -496,6 +496,7 @@
"Render Stage":"مرحلة التصيير",
"Reopen designs":"إعادة فتح التصاميم",
"Reopen the designs that were open when SolidCraft was last closed":"إعادة فتح التصاميم التي كانت مفتوحة آخر مرة",
"Repair Part":"إصلاح الجزء",
"Replace existing library file":"استبدال ملف المكتبة الموجود",
"Report a bug — review a screenshot and open a GitHub draft":"الإبلاغ عن خطأ — راجع لقطة الشاشة وافتح مسودة GitHub",
"Report copied. Keep this text to submit on GitHub when you are online.":"تم نسخ التقرير. احتفظ بهذا النص لإرساله على GitHub عند الاتصال بالإنترنت.",
@@ -584,7 +585,7 @@
"Show ghost":"إظهار الطيف",
"Show in folder":"إظهار في المجلد",
"Show the pointer an AI agent moves (#35)":"إظهار المؤشر الذي يحرّكه وكيل الذكاء الاصطناعي (#35)",
"Show tool at cursor":"إظهار الأداة عند المؤشر",
"Show tool at cursor":"الأداة عند المؤشر",
"Signed axes":"محاور بإشارة",
"Size":"الحجم",
"Sketch constraints":"قيود الرسم",
@@ -595,7 +596,7 @@
"Sketch points":"نقاط الرسم",
"Slider":"منزلق",
"Slot width":"عرض الشق",
"Snap to face and edge centres":"الالتقاط إلى مراكز الأوجه والحواف",
"Snap to face and edge centres":"الالتقاط إلى المراكز",
"SolidCraft cannot submit reports directly. Submit on GitHub; no token is needed in the app.":"لا يستطيع SolidCraft إرسال التقارير مباشرةً. أرسلها على GitHub؛ لا حاجة إلى رمز وصول في التطبيق.",
"SolidCraft closed before these designs were saved. Their last autosave can be opened.":"أُغلق SolidCraft قبل حفظ هذه التصاميم. يمكن فتح آخر حفظ تلقائي لها.",
"Sort A to Z":"فرز تصاعدي",
@@ -738,34 +739,34 @@
"a picked edge's body is gone":"جسم الحافة المحددة لم يعد موجودًا",
"add a key for a joint first":"أضف أولًا مفتاحًا لمفصل",
"ai.prefs.allow_control":"السماح لوكلاء الذكاء الاصطناعي بالاتصال (قناة التحكم / MCP)",
"ai.prefs.allow_control_note":"يفتح قناة تحكم على هذا الحاسوب فقط (127.0.0.1، المنفذ 27878 أو أول منفذ متاح بعده). على البرنامج الذي يتصل أن يقدّم أيضًا رمزًا سريًا لا يقرؤه إلا حساب المستخدم الخاص بك، ويُنشأ من جديد عند كل تشغيل. يُطبّق في المرة القادمة التي يبدأ فيها SolidCraft. عند الإيقاف: لا شيء يستمع ما لم تشغّل SolidCraft مع --control.",
"ai.prefs.availability":"عناصر تحكم المساعد",
"ai.prefs.background_commands":"تشغيل أوامر الوكيل في الخلفية",
"ai.prefs.connect_apps":"إتاحة SolidCraft لتطبيقات الذكاء الاصطناعي على هذا الحاسوب",
"ai.prefs.connect_apps_note":"عند بدء تشغيل SolidCraft، يُضاف كخادم MCP إلى تطبيقات الذكاء الاصطناعي الموجودة على هذا الحاسوب (OpenCode وClaude Desktop وClaude Code وCursor وCodex وGemini CLI وCopilot CLI وWindsurf وZed وVS Code)، ليتمكن الوكيل من استخدامه دون أي إعداد. لا يُضاف إلا مُدخل solidcraft أو يُحدَّث مساره؛ ويُترك المُدخل الذي غيّرته كما هو، ويُنسخ الملف احتياطيًا أولًا. عند الإيقاف تُزال المُدخلات التي أضافها. الأمر «المساعدة > ربط مساعدي الذكاء الاصطناعي…» يفعل ذلك يدويًا.",
"ai.prefs.connect_at_start":"الاتصال بآخر وكيل مستخدم عند بدء SolidCraft",
"ai.prefs.allow_control_note":"قناة محلية (MCP). لا شيء يغادر هذا الحاسوب.\n\nيفتح قناة تحكم على هذا الحاسوب فقط (127.0.0.1، المنفذ 27878 أو أول منفذ متاح بعده). على البرنامج الذي يتصل أن يقدّم أيضًا رمزًا سريًا لا يقرؤه إلا حساب المستخدم الخاص بك، ويُنشأ من جديد عند كل تشغيل. يُطبّق في المرة القادمة التي يبدأ فيها SolidCraft. عند الإيقاف: لا شيء يستمع ما لم تشغّل SolidCraft مع --control.",
"ai.prefs.availability":"التوفر",
"ai.prefs.background_commands":"تشغيل الأوامر البطيئة في الخلفية",
"ai.prefs.connect_apps":"إضافة SolidCraft إلى تطبيقات الذكاء الاصطناعي",
"ai.prefs.connect_apps_note":"إيقافه يزيل الإدخالات مجددًا.\n\nعند بدء تشغيل SolidCraft، يُضاف كخادم MCP إلى تطبيقات الذكاء الاصطناعي الموجودة على هذا الحاسوب (OpenCode وClaude Desktop وClaude Code وCursor وCodex وGemini CLI وCopilot CLI وWindsurf وZed وVS Code)، ليتمكن الوكيل من استخدامه دون أي إعداد. لا يُضاف إلا مُدخل solidcraft أو يُحدَّث مساره؛ ويُترك المُدخل الذي غيّرته كما هو، ويُنسخ الملف احتياطيًا أولًا. عند الإيقاف تُزال المُدخلات التي أضافها. الأمر «المساعدة > ربط مساعدي الذكاء الاصطناعي…» يفعل ذلك يدويًا.",
"ai.prefs.connect_at_start":"توصيل آخر وكيل عند البدء",
"ai.prefs.connect_at_start_note":"يبدأ في الخلفية الوكيل الذي اتصلت به آخر مرة (أو الوكيل الافتراضي) في كل مرة يبدأ فيها SolidCraft، ليكون جاهزًا للمحادثة. لا يحدث ذلك عند بدء SolidCraft مع --control. إذا تعذّر الاتصال، يعرض المساعد «فشل الاتصال» وزر «إعادة المحاولة».",
"ai.prefs.follow_camera":"توجيه الكاميرا نحو الرسومات",
"cmd.panel.native_close":"إعادة إرساء قسم اللوحة من نافذته المستقلة",
"cmd.panel.open":"فتح اللوحة",
"cmd.panel.peek":"عرض اللوحة المطوية مؤقتًا",
"cmd.panel.popout":"نقل اللوحة إلى نافذة مستقلة",
"cmd.panel.reset_pair":"إعادة ضبط فاصل اللوحة",
"cmd.panel.resize":"تغيير حجم قسم اللوحة",
"cmd.panel.resize_pair":"تحريك فاصل اللوحة",
"cmd.parameters_add":"إضافة معامل مستخدم",
"cmd.parameters_change":"تغيير المعاملات",
"cmd.parameters_comment":"التعليق على المعامل",
@@ -1360,6 +1386,7 @@
"crash.unclean_explanation":"اكتُشف عند تشغيل لاحق، ولم يُسجَّل وقت الخروج بدقة. قد يسبب إيقاف تشغيل النظام أو الإيقاف القسري خروجًا غير سليم أيضًا.",
"delete.and_more":"… و{count} غيرها",
"diagnostic.empty_boolean_component":"لا يوجد جسم للقص أو التقاطع في المكوّن '{component}'؛ قد تتداخل الأداة مع '{body}' في المكوّن '{other}' — نشّط ذلك المكوّن أو اختر الجسم هدفًا",
"diagnostic.reselect_reference":"{feature}: المرجع `{reference}` لم يعد موجودًا كما اختير؛ أعد اختياره",
"dialog.bodies_count":"{count} أجسام",
"dialog.clearance_invalid":"يجب أن يكون الخلوص طولًا قيمته 0 أو أكثر",
"dialog.compute":"احسب",
@@ -1369,6 +1396,9 @@
"dialog.custom_axis":"↖ محور مخصص",
"dialog.dimension_insert_hint":"انقر على بُعد قائد آخر لإدراج اسمه",
"dialog.selection_guidance":"حدد مُدخلًا لتغييره. انقر على العناصر المحددة لإزالتها؛ Ctrl/Cmd مع النقر يبدّل تحديدها أيضًا. راجع المعاينة ثم اضغط موافق.",
"document.read_only_save":"فُتح هذا التصميم للقراءة فقط: احفظه كملف جديد",
"document.save_changes":"حفظ التغييرات على {name}؟",
"document.save_copy":"حفظ نسخة…",
"document.tab_unsaved_changes":"تغييرات غير محفوظة",
"document.unsaved_changes":"في {name} تغييرات غير محفوظة. إن لم تحفظها فستضيع.",
"drive.rigid":"{joint} مفصل صلب: يثبّت أجزاءه في مكانها، لذا لا يوجد ما يمكن تحريكه. لتتحرك الأجزاء، غيّر نوعه في «تعديل المفصل»: «دوراني» للدوران، «منزلق» للانزلاق، «أسطواني» لكليهما.",
"drive.stopped_by_contact":"توقف عند {value}: سيخترق {a} الجسم {b}",
"file_load.stopping":"انتظار توقف العملية السابقة...",
"file_load.updating_links":"تحديث الروابط",
"file_load.waiting":"انتظار عملية الملف",
@@ -1521,6 +1561,11 @@
"help.joint.reach":"يحرّك نقطة على قطعة نحو هدف بتغيير مفاصل سلسلتها ضمن حدودها. استخدمه لضبط وضعية آلية حسب الموضع المطلوب لنهايتها، مثل طرف ذراع روبوت.",
"help.joint.rigid_group":"يثبّت القطع المحددة معًا كما هي لتتحرك كقطعة واحدة. استخدمه للقطع التي تنتمي إلى وحدة واحدة ولا تتحرك بالنسبة إلى بعضها.",
"help.joint.screw":"يربط الدوران والانزلاق بخطوة لولبية، بحيث تتقدم القطعة بمقدار تلك المسافة في كل دورة. استخدمه للوالب القيادة والبراغي والمحاور الملولبة.",
"help.layout.apply":"تطبيق تخطيط محفوظ على مساحة العمل الحالية. تحتفظ أدوات التحرير القائمة بمسوداتها.",
"help.layout.get":"قراءة التخطيط المعتمد وعرض مساحات العمل المسجلة.",
"help.layout.reset":"استعادة التخطيط الافتراضي المسجل لمساحة العمل الحالية. تبقى إعدادات المستخدم المسبقة متاحة.",
"help.layout.save":"حفظ التخطيط الكامل باسم محدد. يتطلب استبدال إعداد مسبق للمستخدم إذنًا صريحًا بالكتابة فوقه.",
"help.layout.workspace.select":"اختيار مساحة عمل تخطيط مسجلة وتذكر التخطيط السابق.",
"help.library.apply":"يطبّق مادة أو مظهرًا من ملف مكتبة محلي على أجسام أو أوجه أو مكوّنات. استخدمه لإعادة استخدام مواد حفظتها من تصميم آخر.",
"help.library.export":"يحفظ مواد التصميم ومظاهره في ملف مكتبة. استخدمه لمشاركتها أو إعادة استخدامها في تصميمات أخرى.",
"help.library.inspect":"يفحص ملف مكتبة ويسرد موادّه ومظاهره دون تغيير التصميم. استخدمه لمعرفة ما تحويه المكتبة قبل تطبيقها.",
@@ -1534,6 +1579,21 @@
"help.notice":"NOTICE",
"help.occurrence.ground":"يثبّت قطعة في موضعها أو يحررها مجددًا، بحيث تحرّك المفاصل القطع الأخرى حولها. استخدمه للإطار أو القاعدة التي يُبنى عليها باقي التجميع.",
"help.occurrence.move":"يحرّك جزءًا في التجميع فقط ضمن درجات الحرية التي تسمح بها مفاصله. حدد وجهًا للجزء، ثم اسحب سهمًا أو قوسًا متاحًا.",
"help.panel.activate":"اختيار علامة تبويب لوحة مفتوحة دون طلب تركيز لوحة المفاتيح.",
"help.panel.close":"إغلاق اللوحة بعد التحقق من دورة حياة محتواها. يُحفظ موضعها.",
"help.panel.collapse":"طي قسم اللوحة أو توسيعه مع الاحتفاظ بأبعاده المطلوبة.",
"help.panel.dismiss":"إغلاق العرض المؤقت للوحة مطوية.",
"help.panel.float":"نقل لوحة إلى قسم عائم ذي موضع محدد صراحةً.",
"help.panel.focus":"تركيز لوحة وإعادة فتح حالتها المحفوظة وتوسيع قسمها عند الحاجة.",
"help.panel.move":"نقل لوحة إلى قسم جديد أو ضمها إلى مجموعة علامات تبويب موجودة.",
"help.panel.native_close":"إعادة قسم لوحة من نافذته المستقلة إلى موضع الإرساء المحفوظ دون إلغاء محتواه.",
"help.panel.open":"فتح نوع لوحة بمعرّف مثيل صريح. يتطلب المثيل الجديد تحديد موضعه.",
"help.panel.peek":"إظهار لوحة مطوية مؤقتًا دون تغيير حجمها المحفوظ أو حالة طيها.",
"help.panel.popout":"نقل لوحة إلى نافذة مستقلة عند دعم ذلك. يستخدم مضيف المتصفح قسمًا عائمًا.",
"help.panel.reset_pair":"استعادة نسبة الحجم الافتراضية لقسمي إرساء متجاورين ضمن حدودهما المشتركة.",
"help.panel.resize":"تعيين العرض والارتفاع الخارجيين لقسم اللوحة ضمن حدود جميع علامات التبويب.",
"help.panel.resize_pair":"تغيير حجم قسمي إرساء متجاورين معًا مع الحفاظ على امتدادهما الكلي المشترك.",
"help.parameters.change":"يفتح جدول القيم المسماة والتعبيرات التي تتحكم في أبعاد التصميم. استخدمه لتغيير مقاس في مكان واحد فتتبعه كل الميزات التي تستخدمه.",
"help.parameters.export":"يحفظ معاملات التصميم بصيغة CSV أو JSON. استخدمه لتعديلها في جدول بيانات أو نقلها إلى تصميم آخر.",
"help.parameters.graph":"يبيّن أي المعاملات والميزات تستخدم أيًّا من غيرها، وأي حلقات أو أخطاء بينها. استخدمه لمعرفة ما سيتأثر بتغيير معامل.",
@@ -1719,6 +1779,7 @@
"help.timeline.delete":"يحذف الميزات المحددة من السجل، وحذف رسمٍ يحذف معه الميزات المبنية عليه. استخدمه لإزالة خطوة لم تعد مطلوبة.",
"help.timeline.dependents":"يسرد الميزات التي ستُحذف مع ميزة ما، وتلك التي ستفشل بدونها. استخدمه قبل حذف ميزة أو تغييرها.",
"help.timeline.play":"أعد تشغيل الميزات المتبقية واحدة تلو الأخرى، مع توقف لمدة نصف ثانية بعد كل إعادة بناء. شغّل هذا الأمر مرة أخرى أو اضغط Escape للإيقاف؛ ينتقل «الذهاب إلى النهاية» فورًا إلى النهاية.",
"help.version":"الإصدار {version}",
"help.view.apply":"يدير العرض إلى اتجاه قياسي مثل الأمامي أو العلوي أو الأيزومتري، أو إلى عرض مسمّى محفوظ. استخدمه للنظر إلى النموذج من زاوية ثابتة.",
"help.view.delete":"يحذف عرضًا مسمّى محفوظًا. لا يتغير النموذج.",
"help.view.fit":"يضبط التكبير ويُزيح العرض حتى يملأ النموذج كله أو التحديد منطقة العرض. استخدمه حين يخرج النموذج من مجال الرؤية.",
@@ -1806,6 +1867,27 @@
"home.start_hint":"أنشئ تصميمًا، أو افتح ملفًا حديثًا، أو استكشف مثالًا.",
"home.whats_new":"ما الجديد",
"home.yesterday":"أمس",
"import_report.details":"التفاصيل:",
"import_report.file_one":"كانت هناك مشكلة أخرى واحدة في الملف.",
"import_report.file_other":"كانت هناك {count} مشكلات أخرى في الملف.",
"import_report.hint":"قد يحل ذلك تصدير هذه الأجزاء مرة أخرى من البرنامج الذي أنشأها. يحتوي «نسخ رسالة التحذير» على التفاصيل.",
"import_report.left_out_one":"تعذّر إصلاح وجه واحد وهو مفقود.",
"import_report.left_out_other":"تعذّر إصلاح {count} أوجه وهي مفقودة.",
"import_report.needs_repair_one":"يحتاج جزء واحد إلى إصلاح قبل النمذجة عليه.",
"import_report.needs_repair_other":"تحتاج {count} أجزاء إلى إصلاح قبل النمذجة عليها.",
"import_report.not_imported_one":"تعذّر استيراد جزء واحد.",
"navbar.custom.available":"{available} · اسحبها إلى الشريط، أو اضغط إضافة",
"navbar.custom.buttons":"الأزرار",
"navbar.custom.compact":"مضغوط",
@@ -2016,6 +2105,7 @@
"navbar.custom.reset_default":"إعادة الضبط إلى الافتراضي",
"navbar.custom.right":"نقل إلى اليمين",
"navbar.custom.select":"لم يتم تحديد أي خانة. حدّد خانة على الشريط لنقلها أو إزالتها أو تغيير مظهرها.",
"navbar.custom.separator_hint":"فاصل بين مجموعات الأزرار. اسحبه إلى الشريط، أو اضغط على إضافة؛ يمكنك استخدام أي عدد من الفواصل.",
"navbar.custom.separators_full":"يحتوي الشريط بالفعل على أربعة فواصل.",
"navbar.custom.show":"إظهار شريط التنقل",
"navbar.custom.shows":"يعرض",
@@ -2156,7 +2246,7 @@
"prefs.anti_aliasing_amd_dx12":"يستخدم تنعيم الحواف 1× لأن فحص بدء التشغيل لم يرسم شيئًا مع أخذ العينات المتعددة ونجح عند 1×. يمكنك اختيار إعداد آخر أعلاه؛ أعد التشغيل لتطبيقه إن نجح الفحص.",
"prefs.appearance.viewport_colours":"ألوان العرض ثلاثي الأبعاد",
"prefs.appearance.viewport_logo":"منفذ العرض والشعار",
"prefs.appearance.viewport_logo":"منطقة العرض والشعار",
"prefs.applies_on_restart":"يُطبَّق عند إعادة التشغيل",
"prefs.assistant":"المساعد",
"prefs.assistant_connecting":"الاتصال",
"prefs.assistant_follow_help":"النظر إلى الرسومات يحرّك العرض مع المؤشر.",
"prefs.assistant_limit":"الحد",
"prefs.assistant_limited":"محدود",
"prefs.assistant_pointer_speed":"سرعة المؤشر",
"prefs.assistant_seconds":"ثوانٍ",
"prefs.assistant_seconds_aria":"الثواني",
"prefs.assistant_use_care":"استخدم بحذر",
"prefs.auto_operation":"اختيار العملية تلقائيًا",
"prefs.auto_operation_note":"تختار نوافذ الميزات «ضم» أو «جسم جديد» أو «قص» بحسب ما تلامسه المادة الجديدة، إلى أن تختار عملية بنفسك. عند الإيقاف: تحتفظ بالعملية التي تُفتح بها.",
"prefs.auto_operation_note":"ضم أو جسم جديد أو قص، حسب ما تلامسه المادة.",
"prefs.axes":"المحاور",
"prefs.axis":"المحور",
"prefs.blur_cost":"تكلفة العرض النسبية. زيادة الأشرطة تعني عادةً مزيدًا من العمل.",
"prefs.blur_device":"غير متاح على جهاز الرسوميات أو مسار العرض هذا",
"prefs.blur_guard":"خُفّضت جودة التمويه للحفاظ على استجابة الإطارات. لم يتغير نصف القطر.",
"prefs.blur_off":"إيقاف",
"prefs.blur_reduce_transparency":"معطّل بسبب إعداد تقليل الشفافية في النظام",
"prefs.blur_software":"غير متاح مع الرسوميات البرمجية (gpu-software)",
"prefs.blur_source":"غير متاح في عرض مساحة العمل هذا",
"prefs.blur_web":"غير متاح في مسار عرض الويب هذا",
"prefs.dialogs_note":"مكان فتح حوارات الأوامر: مثبتة عند حافة العرض، أو في العمود الأيسر مكان المستعرض والسجل، اللذين يعودان كما كانا عند إغلاق الحوار.",
"prefs.dimension_step_angle":"ما تضيفه أسهم النافذة وأعلى/أسفل والعجلة إلى الزاوية",
"prefs.dimension_step_length":"ما تضيفه أسهم النافذة وأعلى/أسفل والعجلة إلى الطول",
"prefs.dimension_steps":"خطوات النافذة",
"prefs.dimension_values":"قيم الأبعاد",
"prefs.dimension_values_note":"مكان كتابة قيمة البعد. للنافذة أسهم تغيّرها بخطوات؛ تضع أداة البعد النص أولًا.",
"prefs.dimension_values_view":"في العرض",
"prefs.dimension_values_window":"في نافذة",
"prefs.display":"العرض",
"prefs.edges":"الحواف والتظليل",
"prefs.extend":"توسيع",
@@ -2255,6 +2379,23 @@
"prefs.graphics_card_restart":"يُطبَّق بعد إعادة تشغيل SolidCraft. يتجاوز WGPU_ADAPTER_NAME هذا الاختيار.",
"prefs.graphics_card_unused":"لم تُستخدم بطاقة الرسوميات المحفوظة لهذه النافذة؛ البطاقة المستخدمة تظهر في «المساعدة › حول» وفي شريط الحالة. جرّب «تلقائي»، أو عيّن WGPU_ADAPTER_NAME إلى جزء فريد من اسم البطاقة.",
"prefs.graphics_note":"وازن بين السرعة والنعومة. كل خيار يعرض أثره على عيّنة.",
"prefs.hide_constraint_glyphs_zoomed_out":"إخفاء رموز القيود عند التصغير",
"prefs.hide_constraint_glyphs_zoomed_out_note":"تختفي رموز القيود من العرض عندما يُصغَّر الرسم بقدر يجعلها تزحمه. معطّل: تبقى بحجم ثابت على الشاشة عند أي مستوى تكبير.",
@@ -2263,7 +2404,7 @@
"prefs.history_origin_bodies_note":"يبدأ السجل على اليسار أو تحت المستعرض بمجلد الأجسام للمكوّن النشط وبالأصل، مع أيقونات الإظهار والقوائم كما في المستعرض. لا يتغير السجل في الأسفل.",
"prefs.history_play_button":"زر تشغيل السجل في عناصر تحكم السجل",
"prefs.history_play_button_note":"يضيف تشغيل السجل بين الرجوع خطوة والتقدم خطوة في عناصر تحكم السجل. يمكنك أيضًا النقر بزر الماوس الأيمن على عناصر التحكم لإظهاره أو إخفائه.",
"prefs.history_sketches":"الرسومات",
"prefs.history_sketches":"الرسومات في السجل",
"prefs.history_sketches_in_order":"بالترتيب",
"prefs.history_sketches_note":"عند ضبط الرسومات على «تحت ميزتها»، يعرض السجل على اليسار كل رسم بمستوى واحد للداخل، تحت أول ميزة بُنيت منه، متى كان عريضًا بما يكفي لإظهار الأسماء. أما الخط الزمني في الأسفل فيحتفظ دائمًا بترتيب الإنشاء.",
"prefs.navigator_fit":"ملاءمة النموذج بعد تغيير العرض من متصفح العرض",
"prefs.navigator_fit_note":"النقر على وجه أو ركن أو سهم في المكعب، أو على محور في أداة المحاور، يوجّه العرض أيضًا نحو منتصف النموذج من المسافة الواحدة التي تُظهره كاملًا من كل جهة (كرته المحيطة). يستخدم العرض الرئيسي التكبير والمركز ذاتهما ما دام هذا مفعّلًا، فلا تغيّر العروض المختارة بعده سوى الاتجاه. عند الإيقاف: يدور العرض في مكانه محتفظًا بالهدف والتكبير.",
@@ -2332,11 +2496,15 @@
"prefs.origin_plane_names_note":"الأسماء المعروضة في المستعرض والحوارات والقوائم. {top} هو XY و{front} هو XZ و{right} هو YZ، والمحور Z للأعلى. تحتفظ الأوامر والسكربتات والتصاميم المحفوظة بـ XY وXZ وYZ.",
"prefs.overall_speed":"السرعة العامة",
"prefs.parameter_list_rows":"صفوف قائمة المعاملات",
"prefs.parameter_list_rows_tip":"يعرض السهم لأسفل في حقل قيمة فارغ المعاملات، المفضلة أولًا، حتى هذا العدد. العدد الأقل يبقي القائمة خفيفة في التصميم الكبير.",
"prefs.parameter_list_rows_tip":"الحد الأقصى للمعاملات التي يسردها السهم لأسفل في مربع تعبير فارغ.",
"prefs.single_surface_analysis":"استخدام تحليل سطح واحد",
"prefs.single_surface_analysis_help":"عند إيقاف هذا الخيار، يمكن إبقاء تظليل السطح وتحليل الاستمرارية مفعّلين معًا. عند تشغيله، يبقى آخر تحليل تم بدؤه أو تغييره فقط.",
"prefs.sketch.align_points":"المحاذاة مع نقاط الرسم الأخرى",
"prefs.sketch.align_points_note":"تتحاذى الخطوط أثناء الرسم مع النقاط على المحورين معًا.",
"prefs.sketch.auto_dimensions":"إضافة كل الأبعاد للأشكال الجديدة",
"prefs.sketch.auto_dimensions_note":"القيم المدخلة وكل بُعد يثبّت الشكل.",
"prefs.sketch.auto_locate":"تحديد الموضع من أصل الرسم",
"prefs.sketch.auto_locate_note":"مع إضافة كل الأبعاد.",
"prefs.sketch.center_arc":"القوس بنقطة مركز يتبع المؤشر",
"prefs.sketch.click_selects":"النقر يحدد",
"prefs.sketch.conflict_colour":"لون التعارض",
"prefs.sketch.drawing":"الرسم",
"prefs.sketch.exit_keep":"إبقاء",
"prefs.sketch.exit_previous":"العودة إلى العرض السابق",
"prefs.sketch.exit_unless_rotated":"إلا إذا تم التدوير",
"prefs.sketch.faces_edges":"الأوجه والحواف",
"prefs.sketch.hide_glyphs":"إخفاء الرموز عند التصغير",
"prefs.sketch.marks":"العلامات في الرسم",
"prefs.sketch.note":"الرسم والالتقاط والتحديد.",
"prefs.sketch.opening_closing":"الفتح والإغلاق",
"prefs.sketch.prefer_free_points":"تفضيل النقاط القابلة للتحريك عند تداخلها",
"prefs.sketch.project_options":"السؤال عن خيارات الإسقاط أولًا",
"prefs.sketch.recent_snap":"الالتقاط عند تقاطع دليلين",
"prefs.sketch.select_other_hidden":"تحديد آخر يشمل الهندسة المخفية",
"prefs.sketch.tracking_guides":"أدلة المراكز ونقاط المنتصف",
"prefs.sketch.tracking_guides_note":"أدلة أفقية وعمودية مؤقتة من المراكز ونقاط منتصف الحواف عند التحويم.",
"prefs.sketch.tracking_points":"أدلة من نقاط الرسم أيضًا",
"prefs.sketch.unless_turned_note":"العودة إذا لم يتم التدوير",
"prefs.sketch.whole_bodies":"الأجسام كاملة",
"prefs.sketch_align_points":"المحاذاة مع نقاط الرسم الأخرى أثناء الرسم",
"prefs.sketch_align_points_note":"أثناء الرسم، تتحاذى النقطة أفقيًا مع نقطة رسم وعموديًا مع نقطة أخرى في الوقت نفسه، مع خط إرشادي منقط، وتحتفظ النقرة بالمحاذاتين. عند الإيقاف: مع النقطة السابقة فقط، محور واحد في كل مرة.",
"prefs.stand_up_note":"بعد فتح ملف STEP أو IGES ومحوره Z للأعلى، يُعرض تدويره ربع دورة حول X.",
"prefs.stand_up_unknown":"للملفات من برامج غير معروفة",
"prefs.stand_up_unknown":"ملفات من برامج غير معروفة",
"prefs.stand_up_unknown.ask":"السؤال في مربع حوار",
"prefs.stand_up_unknown.note":"عرض ملاحظة",
"prefs.stand_up_unknown.off":"عدم العرض",
"prefs.stand_up_unknown_note":"طريقة العرض عندما لا يذكر رأس الملف برنامجًا معروفًا بحفظ المحور Y للأعلى. تظهر الملاحظة فقط عندما يبدو أن الملف ملقى على ظهره؛ أما «السؤال في مربع حوار» فيسأل عن كل ملف كهذا، كما كان سابقًا.",
"prefs.stand_up_unknown_note":"كيفية عرض الاقتراح عندما لا يذكر الملف برنامجًا معروفًا.",
"prefs.status_bar":"شريط الحالة",
"prefs.status_bar_note":"شريط رفيع على الحافة السفلية للنافذة يعرض ما يجري تحريره، وحالة الرسم المفتوح بلونها، ووحدات التصميم؛ النقر على الوحدات يغيّرها. عندها لا تظهر حالة الرسم في زاوية العرض.",
"prefs.status_done":"تم",
@@ -2463,6 +2671,10 @@
"prefs.theme_follow_off":"إيقاف",
"prefs.theme_follow_stop":"إيقاف الاتباع",
"prefs.theme_import_hint":"انقر لاختيار ملف سمة، أو أفلت ملفًا هنا، أو اضغط Ctrl+V (Cmd+V على Mac) بعد نسخ سمة",
"prefs.theme_notice_dismiss":"إخفاء",
"prefs.theme_option_blur":"تمويه خلف اللوحات",
"prefs.theme_option_blur_help":"تمويه خلف اللوحات شبه الشفافة، بالبكسل الفعلي. الصفر يوقف التمويه.",
"prefs.theme_option_invalid":"القيمة المحفوظة للخيار {option} غير صالحة؛ تُستخدم القيمة الافتراضية للسمة. تبقى القيمة المحفوظة كما هي.",
"prefs.theme_option_opacity":"العتامة",
"prefs.theme_option_opacity_help":"اضبط عتامة اللوحات العائمة. يُطبّق حد أدنى للعتامة للحفاظ على وضوح النص فوق ألوان منطقة العرض.",
"prefs.theme_option_tab_fade_ms_help":"تتغيّر ألوان اللوحات ومنطقة العرض تدريجيًا عند تبديل علامات التبويب. القيمة صفر تبدّلها فورًا.",
"prefs.theme_options_badge":"الخيارات",
"prefs.theme_options_more":"المزيد · {count}",
"prefs.theme_options_newer":"تتطلب هذه السمة إصدارًا أحدث من SolidCraft. بعد الترقية، أعد استيراد السمة الأصلية لاستعادة تعريفات خياراتها.",
"prefs.theme_options_reset":"إعادة تعيين",
"prefs.theme_options_unavailable":"غير متاح على هذا الجهاز",
"prefs.theme_paste":"لصق السمة",
@@ -2494,8 +2707,14 @@
"prefs.under_cursor":"تحت المؤشر",
"prefs.units_precision":"الوحدات والدقة",
"prefs.updates":"التحديثات",
"prefs.value_boxes_in_view":"إظهار القيم بجانب مقابضها في العرض",
"prefs.value_boxes_in_view_tip":"قيمة الأمر (المسافة، نصف القطر…) في مربع بجانب مقبضه، فوق النموذج. عند الإيقاف: تكتبها في نافذة الأمر، التي تتلقى لوحة المفاتيح بعد التحديد، ولا شيء يغطي النموذج.",
"prefs.validation":"التحقق من الأجسام",
"prefs.validation.each_feature":"مرة لكل ميزة",
"prefs.validation.each_step":"بعد كل خطوة",
"prefs.validation.label":"فحص النواة الكامل",
"prefs.validation.off":"متوقف (تجريبي)",
"prefs.validation_note":"بعد كل خطوة: يفحص كل عملية كنس وعملية منطقية وتقويس.\nمرة لكل ميزة: يفحص ناتج كل ميزة مرة واحدة.\nمتوقف (تجريبي): لا فحص.",
"prefs.value_boxes_in_view":"إظهار القيم بجانب مقابضها",
"prefs.value_boxes_in_view_tip":"مسافة البثق ونصف قطر التدوير... في مربع داخل العرض.",
"prefs.view":"سلوك العرض",
"prefs.view_confirm_corner":"موافق وإلغاء في زاوية العرض",
"prefs.view_confirm_corner_note":"أثناء فتح مربع حوار أو رسم، تؤدي علامة الصح وعلامة الإكس أعلى يمين العرض ما يؤديه زرّا موافق وإلغاء في مربع الحوار، أو تنهي الرسم وتلغيه. وينتقل متصفح العرض إلى أسفلهما.",
@@ -2528,6 +2747,17 @@
"recovery.just_now":"الآن",
"recovery.min_ago":"قبل {count} دقيقة",
"recovery.never_saved":"لم يُحفظ قط",
"refused.change":"تعذّر تغيير {body}.",
"refused.cut":"تعذّر قطع {body}.",
"refused.face_curved":"أحد أوجهه المنحنية لا يمكن استخدامه في النمذجة.",
"refused.face_flat":"أحد أوجهه المستوية لا يمكن استخدامه في النمذجة.",
"refused.face_freeform":"أحد أوجهه الحرة لا يمكن استخدامه في النمذجة.",
"refused.face_rounded":"أحد أوجهه المستديرة لا يمكن استخدامه في النمذجة.",
"refused.faces_apart":"أوجهه لا تلتقي بدقة كافية لاستخدامها في النمذجة.",
"render.adaptive_enable":"توزيع العيّنات باستخدام عيّنات استكشافية مستقلة",
@@ -3885,11 +4115,11 @@
"select two components":"حدد مكوّنين اثنين",
"set by the sketch's lines":"تحدده خطوط الرسم",
"settings.display_quality_note":"المستويات الأدق ترسم الأوجه والحواف المنحنية بنعومة أكبر وتستغرق وقتًا أطول لإنشاء الشبكة. يتغير العرض فقط، لا التصميم ولا الملفات المصدّرة.",
"settings.double_click_components":"انقر نقرًا مزدوجًا على مكوّن لتنشيطه، أو لتحرير مكوّن مرتبط في مكانه",
"settings.double_click_components":"النقر المزدوج على مكوّن لتنشيطه",
"settings.frame_rate_details_note":"يضيف رسمًا لأزمنة الإطارات الأخيرة مع المثلثات المرسومة فوقه، ومدرّجًا تكراريًا لأزمنة الإطارات، وما رسمته وحدة GPU. انقر معدل الإطارات في العرض لإظهارها أو إخفائها.",
"settings.frame_rate_note":"يعرض الإطارات في الثانية في الزاوية اليمنى السفلية من العرض. أثناء تفعيله يُعاد رسم العرض باستمرار.",
"settings.insert_lists_open_designs":"يعرض إدراج تصميم أولًا التصاميم المفتوحة في علامات التبويب الأخرى",
"settings.measure_axis_distances":"إظهار المسافات على X/Y/Z",
"settings.insert_lists_open_designs":"إدراج تصميم يسرد التصاميم المفتوحة أولًا",
"settings.measure_axis_distances":"مسافات المحاور في القياس",
"settings.measure_axis_distances_help":"إظهار مركّبات الأبعاد على محاور العالم بجانب المسافة الكلية أثناء فتح أداة القياس.",
"settings.msaa_applies_on_restart":"يُطبّق تنعيم الحواف في المرة القادمة التي يبدأ فيها SolidCraft",
"settings.msaa_reset":"{setting}: القيمة {requested}× غير مدعومة في جهاز الرسوميات هذا؛ أصبحت الآن {reset}× (المدعوم: {supported}).",
@@ -3899,7 +4129,7 @@
"settings.reset_intro":"هذه الإعدادات لا تعمل على هذا الحاسوب وكانت ستمنع SolidCraft من البدء، لذا غُيّرت:",
"settings.reset_title":"تم تغيير الإعدادات",
"settings.supersampling_note":"يرسم العرض بدقة أعلى ثم يصفّيه: حواف وخطوط وشبكة أنعم على الشاشات الأقل من 4K. يكلّف وقتًا من معالج الرسوميات: نحو 2.25× من البكسلات عند 1.5× و4× عند 2×.",
"settings.update_changed_links":"تحديث التصاميم المرتبطة التي تغيّرت عند العودة إلى علامة التبويب",
"settings.update_changed_links":"تحديث الروابط المتغيرة عند العودة إلى علامة تبويب",
"settings.window_system_details":"التفاصيل",
"settings.window_system_note_now":"يُطبَّق بعد إعادة التشغيل. الحالي: {now}.",
"settings.window_system_wayland_limited":"بعض الميزات محدودة على Wayland الأصلي.",
@@ -3995,11 +4225,20 @@
"the section's profiles must be in one sketch":"يجب أن تكون مقاطع المقطع العرضي في رسم واحد",
"the two origins are on the same component":"يقع الأصلان على المكوّن نفسه",
"thread.automatic_size":"حجم تلقائي",
"thread.chamfer_depth_needed":"مطلوب لهذا الشكل",
"thread.designation":"التسمية",
"thread.direction":"اتجاه السن اللولبي",
"thread.drill_range":"مثقاب التسنين الذي يوصي به صانعو ذكور التسنين {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.drill_range_custom":"المثقاب هو القطر الأكبر ناقص الخطوة، {drill} مم. القطر الأصغر القياسي للسن الداخلي {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.drill_range_taper":"مثقاب التسنين الذي يوصي به صانعو ذكور التسنين {drill} مم. القطر الأصغر القياسي عند نهاية السن {minor} مم. يُقبل مثقاب من {low} إلى {high} مم.",
"thread.form_rp":"سن أنابيب داخلي متوازٍ Rp (ISO 7-1)",
"thread.iso_metric":"متري ISO",
"thread.left_hand":"يساري",
"thread.right_hand":"يميني",
"thread.select_size":"اختر الحجم",
"timeline.delete_after_marker_one":"حذف ميزة واحدة بعد مؤشر السجل",
"timeline.delete_after_marker_other":"حذف {count} ميزات بعد مؤشر السجل",
@@ -4251,6 +4490,7 @@
"ui.agent_chat_no_images":"هذا الوكيل لا يقبل الصور",
"ui.agent_chat_no_picture":"لا توجد صورة في الحافظة",
"ui.agent_chat_no_tool_call":"لم يستخدم النموذج أدوات SolidCraft، لذا لم يتغيّر التصميم. اختر نموذجًا يدعم استدعاء الأدوات؛ راجع «النماذج المحلية» في دليل محادثة الوكيل.",
"ui.agent_chat_node_too_old":"إصدار Node.js {version} قديم جدًا لهذا الوكيل. ثبّت Node.js 20.10 أو أحدث، ثم اضغط تحديث.",
"ui.agent_chat_none_found":"لم يُعثر على وكيل برمجي. ثبّت أحد هذه ثم اضغط تحديث:",
"ui.agent_chat_none_found_short":"لم يُعثر على وكيل",
"ui.agent_chat_not_installed":"غير مثبت",
@@ -4291,7 +4531,7 @@
"ui.agent_chat_send_now_tip":"إيقاف خطوة الوكيل الحالية وإرسال هذه بعدها (Ctrl+Enter)",
"ui.agent_chat_setup_body":"يتواصل SolidCraft مع وكيل برمجة مثبّت على هذا الحاسوب. اختر واحدًا من التفضيلات › الوكيل.",
"ui.agent_chat_setup_title":"إعداد مساعد",
"ui.agent_chat_side":"جانب محادثة الوكيل",
"ui.agent_chat_side":"تثبيت المحادثة",
"ui.agent_chat_signed_in":"سجّل الدخول",
"ui.agent_chat_state_auth":"يلزم تسجيل الدخول",
"ui.agent_chat_state_busy":"جارٍ العمل…",
@@ -4356,14 +4596,14 @@
"ui.ai_key_note":"يُخزّن في سلسلة مفاتيح النظام، وليس في إعدادات SolidCraft أبدًا. اتركه فارغًا لخادم محلي.",
"ui.ai_keychain_error":"رفضت سلسلة مفاتيح النظام: {error}",
"ui.ai_kind":"النوع",
"ui.ai_mode_all":"السماح بكل شيء",
"ui.ai_mode_all":"تنفيذ كل شيء",
"ui.ai_mode_all_note":"لا شيء يسأل أولًا. تبقى تقارير الأعطال محظورة وتظل حدود المجلدات سارية.",
"ui.ai_mode_all_warning":"يمكن للوكيل حفظ تصميمك والكتابة فوقه وتصديره واستبداله دون سؤال. استخدم هذا فقط مع وكيل تثق به، وعلى تصاميم حفظتها.",
"ui.ai_mode_ask":"السؤال في كل مرة",
"ui.ai_mode_ask":"السؤال أولًا",
"ui.ai_mode_ask_note":"كل تغيير في التصميم وكل إجراء على الملفات ينتظر سماحك.",
"ui.ai_mode_edits_note":"أوامر النمذجة تعمل دون سؤال؛ أما الحفظ والفتح والتصدير وإجراءات الملفات أو الإجراءات الهدّامة الأخرى فتسأل.",
"ui.ai_mode_global":"كما هو مضبوط أعلاه",
"ui.ai_mode_global":"كما في الأعلى",
"ui.ai_model":"النموذج",
"ui.ai_model_hint":"qwen3:14b",
"ui.ai_modes_scope":"هذه الإعدادات تغطي أدوات SolidCraft. أدوات الوكيل الخاصة (الصدفة وتعديل الملفات) تتبع وضع الوكيل الخاص، الذي تختاره في رأس لوحة المحادثة عندما تكون للوكيل أوضاع.",
"ui.ai_show_features_note":"محادثة الوكيل: لوحة يعمل فيها وكيل برمجي تستخدمه أصلًا، أو نقطة نهاية نموذج تختارها، على التصميم المفتوح. عند الإيقاف: لا زر ولا اختصار ولا عنصر قائمة ولا لوحة للذكاء الاصطناعي، ولا يُبحث عن شيء أو يُشغّل.",
"ui.ai_show_features_note":"إيقافه يخفي المساعد في كل مكان ولا يبدأ أي شيء. تصبح كل الخيارات أدناه باهتة.\n\nمحادثة الوكيل: لوحة يعمل فيها وكيل برمجي تستخدمه أصلًا، أو نقطة نهاية نموذج تختارها، على التصميم المفتوح. عند الإيقاف: لا زر ولا اختصار ولا عنصر قائمة ولا لوحة للذكاء الاصطناعي، ولا يُبحث عن شيء أو يُشغّل.",
"ui.ai_switch_tip":"تغيير الوكيل لهذه المحادثة",
"ui.ai_test":"اختبار",
"ui.ai_test_acp_ok":"يجيب: {agent}",
@@ -4423,7 +4663,7 @@
"ui.ai_tool_sum_then":"{first}، ثم {next}",
"ui.ai_tool_unfold":"انقر لعرض ما أعاده",
"ui.ai_tool_waiting":"بالانتظار",
"ui.ai_toolbar_button":"إظهار الزر في شريط الأدوات",
"ui.ai_toolbar_button":"زر المساعد في شريط التطبيق",
"ui.ai_toolbar_button_note":"زر الذكاء الاصطناعي في الطرف الأيمن من شريط الأدوات. يظل Ctrl+Shift+A وقائمة العرض يفتحان اللوحة.",
"ui.ai_undo_tip":"التراجع عن كل ما غيّره الوكيل لهذه الرسالة، بخطوة واحدة",
"ui.ai_url_hint":"https://example.com/v1",
@@ -4470,6 +4710,8 @@
"ui.centerline":"خط المركز",
"ui.chain":"سلسلة",
"ui.chamfer":"شطف",
"ui.chamfer_angle":"زاوية الشطف",
"ui.chamfer_depth":"عمق الشطف",
"ui.chamfer_type":"نوع الشطف",
"ui.change_workspace":"تغيير مساحة العمل",
"ui.circle":"دائرة",
@@ -4500,6 +4742,10 @@
"ui.colour_vision_sample":"عيّنة",
"ui.colour_vision_tritan":"ضعف الأزرق",
"ui.colour_vision_tritan_tip":"لضعف أو غياب الإحساس باللون الأزرق",
"ui.comb_length":"طول المشط",
"ui.comb_length_tip":"طول الأسنان: مضاعف للطول التلقائي الذي يجعل أطول سنّ خُمس حجم المنحنيات المعروضة.",
"ui.comb_teeth":"الأسنان",
"ui.comb_teeth_tip":"عدد أسنان كل مشط، موزّعة بالتساوي على طول المنحنى. كلما زادت الأسنان ظهرت تفاصيل أكثر عن تغيّر الانحناء.",
"ui.combine":"دمج",
"ui.coming_later":"قريبًا",
"ui.command_done":"تم {command}",
@@ -4524,11 +4770,24 @@
"ui.construction.ribbon_label":"خطوط مساعدة",
"ui.construction.side_hint":"خط إنشائي: انقر الجهة التي يمتد نحوها الخط؛ انقر بزر الفأرة الأيمن للبدء من جديد",
"ui.extrude_auto_to_object":"البثق إلى هدف مختار",
"ui.extrude_auto_to_object_tip":"في البثق، مع اختيار مقطع، يؤدي اختيار وجه أو رأس أو مستوى موازٍ خارج مستواه إلى تبديل الامتداد إلى «إلى كائن»",
"ui.extrude_auto_to_object_tip":"وجه أو رأس أو مستوى موازٍ يغيّر الامتداد إلى «إلى كائن».",
"ui.factor":"المعامل",
"ui.fade":"تلاشٍ",
"ui.fade_length":"طول التلاشي",
"ui.feature_history":"سجل الميزات",
"ui.feature_options":"خيارات الميزة",
"ui.features":"الميزات",
"ui.file":"ملف",
"ui.fillet":"تقويس",
"ui.fillet_corner_ball":"كرة",
"ui.fillet_corner_ball_tip":"جزء من سطح الكرة المتدحرجة، مماسّ (G1) لكل تقويس.",
"ui.fillet_corner_curvature_tip":"الانحناء (G2): رقعة ناعمة. تُرجَع الزاوية على طول كل حافة بمقدار الإرجاع ({factor} ضعف نصف القطر ما لم تكتب قيمة) وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار.",
"ui.fillet_corner_needs_constant":"زوايا الرقعة الناعمة (G2) تتطلب نصف قطر ثابتًا وملاءمة دقيقة لنصف القطر.",
"ui.fillet_corner_patch":"رقعة ناعمة",
"ui.fillet_corner_patch_tip":"متصل الانحناء (G2): تُرجَع الزاوية على طول كل حافة وتُملأ برقعة، فتمر الانعكاسات عبرها دون انكسار.",
"ui.fillet_corner_tangent_tip":"مماس (G1): زاوية بالكرة المتدحرجة، جزء من سطح الكرة المتدحرجة مماسّ لكل تقويس.",
"ui.fillet_error_corner":"تعذّر بناء الزاوية الناعمة هنا. جرّب مسافة إرجاع أخرى، أو زوايا مماسّة.",
"ui.fillet_error_failed":"تعذّر بناء هذا التقويس على هذه الحواف. جرّب نصف قطر آخر، أو قوّس حوافّ أقل في المرة الواحدة.",
"ui.fillet_error_setback_short":"مسافة الإرجاع قصيرة جدًا على رقعة هذه الزاوية: تُبنى ابتداءً من {least}. جرّب مسافة إرجاع أطول.",
"ui.fillet_error_too_large":"نصف القطر كبير جدًا على الوجوه المجاورة لهذه الحواف. جرّب نصف قطر أصغر، أو اختر في «حدود الوجوه» الخيار «أكبر نصف قطر».",
"ui.fillet_fit":"حدود الوجوه",
"ui.fillet_fit_exact":"نصف قطر دقيق",
"ui.fillet_fit_needs_constant":"ملاءمة نصف القطر تتطلب نصف قطر ثابتًا.",
"ui.fillet_fit_reduce":"أكبر نصف قطر",
"ui.fillet_fit_taper":"نصف قطر مُضيَّق",
"ui.fillet_fit_tip":"عندما يكون نصف القطر أكبر مما تسمح به الوجوه المجاورة للحافة.\nنصف قطر دقيق: نصف القطر كما هو، أو لا تقويس ورسالة توضّح السبب.\nأكبر نصف قطر: تُقوَّس كل حافة بأكبر نصف قطر يتّسع.\nنصف قطر مُضيَّق: يبقى نصف القطر، ويُضيَّق التقويس فقط حيث تنتهي الوجوه.",
"ui.fillet_options_tip":"سلسلة مماسّة: قوّس أيضًا الحواف التي تتصل بسلاسة بالحواف المختارة.\nمعاينة: اعرض النتيجة في العرض أثناء التحرير.",
"ui.fillet_setback":"مسافة الإرجاع",
"ui.fillet_setback_hint":"{factor} × نصف القطر",
"ui.fillet_setback_least":"أكثر من {least}",
"ui.fillet_setback_tip":"حيث تبدأ رقعة الزاوية الناعمة: المسافة على طول كل حافة من الزاوية. الافتراضي {factor} ضعف نصف القطر. يجب أن تكون أكبر من أقل مسافة إرجاع، وهي التي تلتقي عندها التقويسات دون إرجاع: نصف القطر حين تكون الأوجه متعامدة.",
"ui.fillet_turn_tip":"حيث يلتف تقويسان حول حافة ركن حادة بينهما، مثل التقويسات على قاعدة نتوء عند حوافه القائمة.\nوصلة مائلة: يمتد التقويسان حتى يلتقيا في وصلة مائلة.\nملتف: يتوقف التقويسان عند حافة الركن ويلتفان حولها، والركن طارة مماسة لكليهما. فقط لتقويسين بنصف قطر واحد حول حافة ركن مستقيمة ومحدبة.",
"ui.fillet_type_choices_tip":"نصف قطر ثابت: نصف قطر واحد على طول الحافة.\nطول الوتر: يبقى عرض التقويس نفسه مهما كانت الزاوية بين الوجوه.\nنصف قطر متغيّر: نصف قطر عند كل طرف، ومزيد على طول الحافة إن أضفته.\nمتصل الانحناء: مقطع بلا انكسار في الانعكاسات حيث يلتقي بالوجوه المستوية (G2).\nمنحنى شريحي: يتبع نصف القطر على طول الحافة أنصاف أقطار تحكّم تحدّدها.",
"ui.fillet_type_curvature":"متصل الانحناء",
"ui.fillet_type_tip":"المقطع عبر الحافة. متصل الانحناء: مقطع متصل الانحناء (G2) بين وجوه مستوية، فتمر الانعكاسات من الوجوه إلى التقويس دون انكسار.",
"ui.filter_commands_or_keys":"تصفية الأوامر أو المفاتيح",
"ui.findInTimeline":"البحث في الخط الزمني",
"ui.findInWindow":"البحث في النافذة",
@@ -4789,7 +5084,7 @@
"ui.hidePlanes":"إخفاء المستويات",
"ui.hideProfile":"إخفاء المقطع",
"ui.hide_component_history":"إخفاء سجله",
"ui.hide_origin_by_default":"إخفاء نقطة الأصل افتراضيًا",
"ui.hide_origin_by_default":"إخفاء مجلد نقطة الأصل في التصاميم الجديدة",
"ui.hide_origin_note":"تبدأ التصاميم الجديدة ومجلد نقطة الأصل مخفي. يحتفظ كل تصميم بإعداد نقطة الأصل الخاص به بمجرد إظهارها أو إخفائها.",
"ui.history_back":"الرجوع خطوة",
"ui.history_below_browser":"أسفل المستعرض",
@@ -4829,6 +5124,7 @@
"ui.inspect":"فحص",
"ui.instances":"النسخ",
"ui.intersect":"تقاطع",
"ui.iso_4753":"ISO 4753",
"ui.isolate":"عزل",
"ui.join":"ضم",
"ui.joint_play":"▶ تشغيل",
@@ -4931,6 +5227,7 @@
"ui.part_size_needs_a_part":"حدد قطعة قياسية مُدرجة (برغي أو صامولة أو حلقة مسطحة أو مسمار) لتغيير مقاسها. لتكبير جسم أو تصغيره، استخدم «تحجيم».",
"ui.part_size_shared":"يعيد بناء القطعة مستبدلًا أي ميزات مضافة. تتحدث كل نسخ هذا المكوّن.",
"ui.paste":"لصق",
"ui.patch_continuity_corner_tip":"تلتقي الرقعة بالأوجه المحيطة بها بالاستمرارية المختارة على طول كل جانب. وعند زاوية تلتقي فيها تلك الأوجه بعضها ببعض بانحناءات مختلفة، تبقى مماسّة (G1) هناك.",
"ui.path":"المسار",
"ui.pattern_object_type_tip":"الأجسام: أشكال مصمتة تُختار في العرض أو في المستعرض؛ يُنسخ كل منها كاملًا.\nالميزات: خطوات في السجل، مثل بثق أو ثقب، تُختار في السجل أو على وجه صنعته؛ تتكرر الخطوة.\nالرسم ليس أيًّا منهما: كرّر منحنياته بأداة النمط أو المرآة داخل الرسم، أو ابثقه أولًا.",
"ui.pattern_on_path":"نمط على مسار",
@@ -4947,7 +5244,7 @@
"ui.pitch":"الخطوة",
"ui.placement":"الموضع",
"ui.placement_handles":"مقابض الموضع",
"ui.placement_handles_tip":"مقابض على معاينة المسند أو النتوء أو وصلة الكبس: اسحب العلامة لتحريكها على النموذج، وأدِرها من حلقتها",
"ui.placement_handles_tip":"علامة لسحب الميزة عبر النموذج وحلقة لتدويرها.",
"ui.step_values_tip":"في حقل قيمة تكتب فيه، يغيّر السهمان لأعلى ولأسفل الرقم العادي بمقدار 1 (Shift: 10، Alt: 0.1)، وكذلك عجلة الفأرة فوق الحقل. أما التعابير فتبقى كما كُتبت.",
"ui.step_values":"تغيير القيم بالأسهم والعجلة",
"ui.step_values_tip":"يغيّر السهمان لأعلى ولأسفل والعجلة فوق حقل قيمة الرقم فيه.",
"Sections (one sketch each)":"Presjeci (po jedna skica)",
"Select Other":"Izaberi drugo",
"Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).":"Izaberi drugo: držite lijevo dugme mirno na modelu (ili desni klik › Izaberi drugo…) da prikažete sve ispod pokazivača; ponovo kliknite na isto mjesto da izaberete sljedeći element. Dvaput kliknite srednjim dugmetom za Početni prikaz (Postavke › Navigacija).",
@@ -859,6 +861,7 @@
"cmd.component_extract":"Izdvoji u datoteku",
"cmd.component_finish_edit":"Završi uređivanje",
"cmd.component_from_bodies":"Napravi komponente iz tijela",
"cmd.component_hide_history":"Sakrij vremensku traku komponente",
"config.rule_parameter_columns":"Prikazani su samo parametri koji imaju kolonu u tabeli. Dodajte kolonu pomoću Dodaj kolonu (+) da biste parametar koristili ovdje.",
"config.rule_suppression_columns":"Prikazane su samo operacije koje imaju kolonu Potisni u tabeli. Dodajte kolonu pomoću Dodaj kolonu (+) da biste ovdje mogli upravljati operacijom.",
"contact.components_count":"Komponente: {count}",
"contact.enabled_label":"omogućeno",
"coupling.gear_1":"Zupčanik 1",
@@ -1353,7 +1373,11 @@
"dialog.pattern_sketch_not_object":"Izaberite tijela ili operacije: skica nije ni jedno ni drugo. Ponovite njene krive pomoću alata Niz ili Preslikaj u samoj skici ili je prvo ekstrudirajte.",
"dialog.selection_guidance":"Izaberite ulaz da ga promijenite. Kliknite izabrane objekte da ih uklonite; Ctrl/Cmd-klik ih također uključuje i isključuje. Pogledajte pregled, a zatim pritisnite U redu.",
"dialog.selection_midpoint":"Središnja tačka · {id}",
"dialog.selection_step":"{step} od {total}: Izaberite {input}",
"dialog.step":"Korak",
"document.changed_on_disk":"{name} je promijenjen na disku",
@@ -1436,6 +1460,7 @@
"help.construct.axis.two_points":"Pravi pomoćnu osu kroz dvije tačke, vrhove ili tačke skice. Koristite je za osu koja prolazi između dva poznata položaja.",
"help.construct.plane.along_path":"Pravi pomoćnu ravan okomitu na ivicu ili krivu, na nekom položaju duž nje. Koristite je da skicirate profil za povlačenje ili presjek putanje.",
"help.construct.plane.at_angle":"Pravi pomoćnu ravan zakrenutu za ugao u odnosu na ravan ili lice, oko ose ili ivice. Koristite je za nagnute skice, npr. kutni nosač.",
"help.construct.plane.axis_point":"Pravi pomoćnu ravan koja sadrži osu i tačku izvan te ose. Izaberite osu ishodišta ili pomoćnu osu, ravnu ivicu ili liniju skice, pa vrh, tačku skice ili pomoćnu tačku. Tačka na osi ne može odrediti jedinstvenu ravan.",
"help.construct.plane.midplane":"Pravi pomoćnu ravan na pola puta između dvije ravni ili ravna lica, ili koja ih raspolavlja tamo gdje se sastaju pod uglom. Koristite je kao ravan simetrije za preslikavanje.",
"help.construct.plane.offset":"Pravi pomoćnu ravan paralelnu s ravni ili ravnim licem, na određenoj udaljenosti ili kroz tačku. Koristite je da skicirate na zadatoj visini iznad lica.",
"help.construct.plane.perpendicular":"Pravi pomoćnu ravan koja sadrži liniju ili ivicu i okomita je na ravan ili lice. Koristite je da skicirate uspravno na modelu duž ivice.",
@@ -1812,6 +1837,8 @@
"joint_move.blocked_hint":"Provjerite vrstu spoja (npr. Kruti), učvršćenje, granice spoja i vrijednosti koje pokreću parametri.",
"joint_move.blocked_title":"Ovaj dio se ne može pomjeriti",
"joint_move.coarse":"Korak rotacije blizu ose (°)",
"joint_move.conflict":"Jedan spoj ovog dijela je u sukobu s ostalima: {joint}.",
"joint_move.conflict_hint":"Uredite, potisnite ili izbrišite spoj koji je u sukobu da bi ostali spojevi mogli postaviti dio.",
"joint_move.distance":"Udaljenost od početka",
"joint_move.done":"Gotovo",
"joint_move.fine":"Korak rotacije dalje od ose (°)",
@@ -1911,6 +1938,8 @@
"motion.track_name":"Staza {number}",
"nav.alias.help":"Shift+Alt+povlačenje lijevim dugmetom orbitira, Shift+Alt+srednjim pomjera, Shift+Alt+desnim zumira; povlačenje srednjim dugmetom također pomjera, a desnim orbitira",
"nav.blender.help":"Povlačenje srednjim dugmetom orbitira, Shift+srednje pomjera, Ctrl+srednje zumira; povlačenje desnim dugmetom ne dira kameru",
"nav.creo.help":"Povlačenje srednjim dugmetom orbitira, Shift+srednje pomjera, Ctrl+srednje uz vertikalno povlačenje zumira (prema dolje za približavanje); točkić također zumira",
"nav.creo.label":"Creo",
"nav.free_orbit.help":"Miš i 3D miš rotiraju kroz oba pola i čuvaju nagib. Privlačenje osa tipkom Shift je isključeno.",
"nav.free_orbit.label":"Slobodno orbitiranje",
"nav.free_orbit.snap_help":"Miš i 3D miš rotiraju kroz oba pola i čuvaju nagib. Držite Shift tokom povlačenja za orbitiranje da privučete smjer pogleda i nagib.",
@@ -2063,12 +2092,19 @@
"parts.family.button_head_cap_screw":"Vijak s poluokruglom glavom i imbusom",
"parts.family.dowel_pin":"Cilindrični zatik",
"parts.family.hex_bolt":"Vijak sa šestougaonom glavom",
"parts.family.hex_cap_screw_inch":"Vijak sa šestougaonom glavom (inč)",
"prefs.cut_preview_tint":"Prikaži uklonjeni materijal u crvenoj boji",
"prefs.cut_preview_tint_help":"Pregled ispunjava materijal koji operacija uklanja i oblik koji zamjenjuje crvenom prozirnom sjenom. Kada je isključeno, te ispune su potpuno prozirne i crtaju se samo njihovi obrisi.",
"prefs.dark_parts_shading":"Zadrži oblik tamnih dijelova",
"prefs.dark_parts_shading_help":"Sjenči prikaz u linearnom svjetlu s mekim dopunskim svjetlom neba, tako da tamna lica zadrže gradijent umjesto da pocrne",
"prefs.dead_zone_note":"Šrafirana traka je mrtva zona: kretanje unutar nje se zanemaruje.",
@@ -2200,6 +2240,8 @@
"prefs.interface_language":"Jezik interfejsa",
"prefs.interface_note":"Kako SolidCraft izgleda i gdje su njegovi dijelovi.",
"prefs.interval_minutes":"{n} min",
"prefs.invert_curved_roll_arrows":"Obrni zakrivljene strelice za valjanje",
"prefs.invert_curved_roll_arrows_note":"Dvije zakrivljene strelice u uglu kocke valjaju prikaz unutar ravni ekrana. Uključeno: strelica u smjeru kazaljke na satu valja prikaz suprotno od smjera kazaljke na satu, a strelica suprotno od smjera kazaljke na satu valja ga u smjeru kazaljke na satu. Isključeno: svaka strelica valja prikaz onako kako je zakrivljena.",
"prefs.invert_navigator_arrows":"Obrni strelice za rotaciju kocke prikaza",
"prefs.invert_navigator_arrows_note":"Strelice oko kocke orbitiraju kameru u smjeru u kojem pokazuju, kao u programima Fusion i Inventor: strelica s lijeve strane pokazuje udesno i zakreće kameru udesno. Isključeno: strelica okreće kocku prema strani na kojoj se nalazi, pa lijeva strelica zakreće kameru ulijevo. Postavka ne utiče na zakrivljene strelice za valjanje.",
"prefs.keep_work_on_tab_switch":"Zadrži dijaloge i alate otvorenima pri prebacivanju između dizajna",
@@ -2259,6 +2301,8 @@
"prefs.placement":"Postavljanje",
"prefs.prefer_free_sketch_points":"Daj prednost pokretnim tačkama skice kada se tačke preklapaju",
"prefs.preview_choices":"Pregled vaših izbora",
"prefs.preview_tint_new_faces":"Oboji novu površ u pregledu",
"prefs.preview_tint_new_faces_help":"Pregled operacije koja mijenja tijelo može nacrtati površ koju dodaje u boji pregleda. Kada je isključeno, tijelo se crta kakvo jest.",
"prefs.print_face_highlight":"Isticanje površine za štampu",
"prefs.print_face_highlight_tip":"Koliko se jako površina za štampu tijela boji i obrubljuje u prikazu. 0 % ne prikazuje isticanje.",
"prefs.profile_active":"Aktivni profil",
@@ -2556,6 +2600,10 @@
"render.base_color":"Osnovna boja · sRGB",
"render.base_metallic":"Metalni udio",
"render.base_opaque_only":"Ovaj uređivač čuva semantiku neprozirnih tijela. Za optičko propuštanje koristite izričite kontrole stakla.",
"render.batch_all_shots":"Svi kadrovi ({count})",
"render.batch_empty":"Sačuvajte kadar prije renderovanja svih kadrova.",
"render.batch_limit":"Renderovanje svih kadrova ograničeno je na 32 kadra.",
"render.batch_status":"U toku: {running} · Na čekanju: {waiting}",
"render.bloom_enable":"Sjaj prikaza",
"render.bloom_help":"Kreativni sjaj samo na izlazu iz pozitivnih linearnih svijetlih dijelova, raširen kroz tri normalizovana prolaza kutijastog filtera. Poluprečnik je u pikselima izlaza. Dodaje se u linearnoj svjetlosti prikaza prije sRGB-a; nije objektiv, volumetrijski efekat niti poboljšanje konvergencije. Sirovi EXR ostaje nepromijenjen.",
"render.bloom_opaque":"Sjaj zahtijeva neprozirni izlaz. Prozirni PNG se odbija, a ne spljoštava tiho.",
@@ -2666,6 +2714,13 @@
"render.choose_look":"Prvo izaberite izgled u Izgledima",
"ui.hide_origin_note":"Novi dizajni počinju sa skrivenim folderom Ishodište. Dizajn zadržava vlastitu postavku Ishodišta kada ga prikažete ili sakrijete.",
"the two origins are on the same component":"de to nulpunkter er på samme komponent",
"thread.automatic_size":"Automatisk størrelse",
"thread.designation":"Betegnelse",
"thread.direction":"Gevindretning",
"thread.iso_metric":"ISO-metrisk",
"thread.left_hand":"Venstregænget",
"thread.right_hand":"Højregænget",
"thread.select_size":"Vælg størrelse",
"timeline.delete_after_marker_one":"Slet 1 feature efter historikmarkøren",
"timeline.delete_after_marker_other":"Slet {count} features efter historikmarkøren",
@@ -4483,10 +4480,15 @@
"ui.construction.ribbon_label":"Hjælpelinjer",
"ui.construction.side_hint":"Hjælpelinje: Klik på den side, linjen går mod; højreklik for at starte forfra",
"ui.context_menu":"Genvejsmenu",
"ui.continuity_crease":"Knæk",
"ui.continuity_curvature":"Krumning",
"ui.continuity_curvature_change":"Ændring i krumning",
"ui.continuity_g0":"G0-knæk",
"ui.continuity_g1":"G1-tangentkontinuitet",
"ui.continuity_g2":"G2-krumningskontinuitet",
"ui.continuity_gap":"Åbning mellem flader",
"ui.continuity_position":"Positionskontinuitet",
"ui.continuity_tangent":"Tangentkontinuitet",
"ui.copy":"Kopiér",
"ui.corner":"Hjørne",
"ui.corners":"Hjørner",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
CamWight
