The site now serves the web app in three channels. /app/ is built from the latest release
instead of main, /app-rc/ from the newest release candidate and /app-edge/ from main. Each
pre-release channel keeps its designs, settings and recovery copies apart from the release's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Main took #11351 as one squashed commit (ea772a043). This merge records its history as 509
wave commits: a wave ends at every SMLib pin and holds at most 4 commits or about 800 changed
lines. Each wave lists the commits it holds; the originals stay reachable from tag
archive/merge-main-develop. Main's files are kept as they are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* UI: rim and wall picking tests for a circle of arcs that is one wall
A circle drawn as two half arcs now extrudes to one full-turn wall with its
seam edge, and each rim is one closed edge (tangency-labs/smlib#67). The tests
keep their intent on that body: a rim clicked once is one item, measured and
highlighted whole and picked from either side; a wall picked either side of
its seam is the same surface, lit whole, and toggles off from the other side;
every face is its own patch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillets: a later round at a corner where earlier rounds meet blends them again with it
The owner's ruling of 2026-10-30: a later fillet on an edge at a vertex where earlier
rounds already meet in a mitre makes the corner rounding all of them at once makes, one
smooth patch, the mitre gone. A body made by constant-radius rounds keeps what they were
made on and which edges they rounded at which radius; a later round reaching such a corner
blends the earlier rounds' edges (from the earliest of those meeting there on) with the new
edges in one SMLib blend of the body before them. The result's history is put over the body
the later round was given: an earlier round's face is that face trimmed anew (its name
kept), the corner patch and the new rounds are the later fillet's. A picked mitre seam has
no round of its own: it is refused unless a new edge of its radius meets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Two box edges rounded r2 in one fillet, then the upright edge at their mitre r3 in a second
fillet (tangent chain on, so the seam comes with it): 10 faces, 7928.743041 mm³ as
fillet_radii of the box gives, the r2 rounds' names kept, the r3 round and the corner patch
the second fillet's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: a body's record of rounds goes with its history, and can be read back
The rounds that made a body are over the body its history is over: a new history (an
operation carrying a step's result back to its own operands) leaves the record out, so a
later round never reads one history against another body. Body::rounds gives the record and
Body::with_rounds_of takes one back, checked (edges of the body before them, a fillet's
radii, the body's history over that body), for a saved model to keep it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
A design gave another body when opened from its model cache: the rounds a body was made of
lived only in memory, so a later round at their mitre was built sequentially (or refused, as
too large) after opening and blended with them when evaluated anew. The saved model now
records, per kernel body made by rounds, the body they were made on (a place in the bodies,
stored once though no state holds it) and the edges with their radii; reading it attaches
them back down each chain, and a thinned model keeps those bodies with the bodies made from
them. Model cache format 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
three_rounds_at_a_corner bounded the patch's extra cut at 3 mm³ beyond the strips, a figure
with no derivation; SMLib's all-at-once body at radii 2, 3, 4 takes 3.099 (V 7878.579574
against strips 7881.678). That body is the strips' outside the block its patch lies in: its
rounds are the strips' cylinders ending at a's section y = rc, b's x = 20 − rc and c's rails
where they meet a's and b's (the patch's four corners, now asserted), so the patch takes at
most what the strips leave in that block (11.86 at 2/2/3, 32.69 at 2/3/4). The lower bound is
that block; the upper one, at most the strips' volume, stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Model cache format 7 (f3cf0c4f3) records a `rounds` list in every saved model, and reading one
without it is refused ("saved model: rounds"), as is a model without any of its other lists:
the states, the preview and the thinned model all came back empty. The io tests' saved_model
and timeline_model wrote format-6 records, so six tests (the round trip, the repeated part
stored once, and the four too-big-for-the-file cases) read nothing. Their bodies are none made
by rounds: the list is empty, and every expectation stays as it was.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin eaa998a (tangency-labs/smlib#68, #69, #70)
Batch 4: drafts and loops, mitre corners, rim chamfers, rulings, tight box, stitch, point
classification, eased corners. Batch 5: a face's tight box divides its cells at the surface's
knots (thread boxes exact); a cylinder, cone, sphere or torus is extended along its own circles.
Batch 6: a revolution's extension closes its turn; a dropped point's foot is the converged one.
The C API is ABI 5 (smlib_blend_dropping and smlib_brep_classify_point are new; nothing existing
changed), so the binding expects 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a strip's tangent and curvature run-offs are the distance long across the surface
SMLib measures an extension's distance across the surface (smlib_extend_sheet corrects
CreateExtendedSurface until the parameter line through the side's middle is that long), so each
run-off of the cylinder strip, swept 20 along z, adds 5 x 20: 10 pi/2 20 + 100 = 414.159 for
both. The parabola-length formula (418.18) was truck's.
Ruling d2 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: one smooth angle, and a round too small to change the part is refused
The blend's tangent angle is the shaded view's half degree (smooth_edges::ANGLE), one value
for smooth. A constant round lies r (sec(d/2) - 1) inside the crease it replaces (about
r d^2/8); below the edge's tolerance it changes nothing and is refused before SMLib (which
answered SM_ERR_INVALID_INPUT), naming the smallest radius that rounds,
tolerance / (sec(d/2) - 1). d is the least turn along the edge
(tangent_edge::least_angle_along, at tangent_all_along's stations).
Ruling d3 (2026-10-30). The block's tolerance is 2e-5 mm, not 0.1 um: at 1 deg the smallest
radius is 0.526 mm, so R2 and R20 reach SMLib, which still calls an edge within 2 deg smooth
(SmEdge::GetBlendEdgeuse); that test is ignored until SMLib uses 0.5 deg.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
smlib_chamfer turns the distance into a ball radius d sqrt((1 - c)/(1 + c)), c the faces'
binormals' dot (capi chamfer_radius); at #851's cusp the binormals agree, the radius is 0 and
the call is SM_ERR_INVALID_INPUT before the fillet executive runs (gdb: chamfer_edges sees
radius 0; the dump's why is empty). SolidCraft hands every chamfer to SMLib, so the
ball-contact chord (the ball of radius d: 3.822 wide at d = 2, 159.2365 removed) is SMLib's to
build.
Ruling d4 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
R21 on a 20 mm cube's edge builds (6107.529370, closed form, to 2e-12). With R5 on the
corner's other edges the R21 takes the faces they lie on, so the body is R21's alone; SMLib
fails that blend (status 1001, fillet error 4, Unable to Trim Rail Curve) and the test is
ignored until it builds. It replaces the refusal test that expected TooLarge.
Ruling d8 (2026-10-30).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
With SMLib's smooth limit at half a degree (422e6f1) the 1 degree crease rounds R2 and R20
(the test is no longer ignored), and with a cusp's chamfer the ball of radius d (d231547) the
The 0.5 one stays, for its own cause (the chamfer face left apart from the body). Two corner
cases the same SMLib (replay/1.0.1 and those commits) builds come off too.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
SMLib (smlib-batch-4-rulings 0e83cca, SMLIB_ABI_VERSION 5) rounds the edges whose rounds overflow
their faces first and then what is left of the others; smlib_blend_dropping says which picks'
edges the overflow removed whole. The smlib crate binds it (Brep::blend_dropping), the kernel
returns those picks (fillet_removing), and a fillet notes them as its warning: "the edge at
(0, 0, 10) was removed by the larger round, so it is not rounded" (a 50 x 50 x 20 block, R21 on
its bottom front edge with the front left upright: the block is R21's alone, in closed form).
Ruling d8: [21, 5, 5] on a 20 cube builds as R21 alone (6107.529370); the test is no longer
ignored. R25 with R2 at a corner (blend_corner) builds the same way, R25's alone in closed form,
where it was refused. The rig's 1080 notched block outline at R8 builds now and comes off the
known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the knife edge's 0.5 chamfer builds
SMLib's trim took a fillet meeting its face at more than 78 degrees for one with no side
(smlib-batch-4-rulings 971e567); the chord of the knife edge's 0.5 chamfer meets the flat face at
81 degrees. The case comes off the known-failing list.
Needs SMLIB_REV at that SMLib once it is pushed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Owner ruling d6: the letter t of "tres long" was drafted inward by SMLib (its
loop's normal, summed from the cross products of its chords, pointed down;
fixed in SMLib). With the fix every letter grows, and the join builds at 3°
and 15° by the Round rule and by the default rule (tangent for spline
outlines), where before 15° was expected to be refused.
Exact where the outline derives it: a letter's section at height z is its
outline offset by e = z tan a, by the Round rule of area A + P e + C e² while
the offset trims nothing (Steiner; C half each loop's turning less
tan(t/2) - t/2 at each reflex corner), so the letter is
A h + P k h²/2 + C k² h³/3. Each extruded alone, the t at 3° and s, l and o
at 3° and 15° are checked to 1e-6 (SMLib measures them within 1.3e-9; its
mass properties integrate to 1e-8). The concave joins of r, n, g and e are
tighter than e already at 3° (their swallowtails trimmed: r 1.1e-3 under the
formula), the t's by 15° (9.9e-5 over), and on the block the letters grow
into each other, so the whole word is checked for what holds exactly: one
closed body with the block, and half-way up every point of each straight
letter's outline inside the solid (the t drafted inward failed that).
With SMLib's fix (smlib-batch-4-text-loops 82133b2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges asked G1 at every blend seam. Its front wall
leans 19 over 20 and the others 10 over 20, so at each rim corner the two mitred rounds meet the
sloped corner edge at different heights (0.155625 and 0.276393 below the top): the deeper round
runs on past the corner edge and is cut by the plane of the other's wall, a crease by
construction, the gap below the shallower round filled on that plane. The check now measures
the rounds' contact seams, on the top and on each wall, where the rounds are tangent. The
volume is unchanged.
With SMLib smlib-batch-4-mitre (1c15364): the case passes (V 144530.427946 against
144530.427909, 15 faces, sound); before it, only the four corner creases failed the check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* smlib: Brep::classify_point says exactly where a point lies against a body
Binds the fork's smlib_brep_classify_point (SmBrep::Point3DClassify at the body's own zone
tolerance): inside, outside, or on the boundary within that tolerance of a face, an edge or a
vertex. A box and a cylinder just off its curved wall in measure's tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::classify_point decides inside, outside or on the boundary exactly
SMLib's point classification at the body's own tolerance, on the exact faces and edges, in
place of a mesh at a chord of 2e-3 of the body's size (about 0.4 mm on a 200 mm part). A point
within the tolerance of a face, edge or vertex is OnBoundary, never decided by a ray. A mesh
body's triangles are its exact shape: on them within the record's tolerance, else by ray
crossings. The kernel's own probes move to it; Body::contains goes once its last callers have.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* doc: a hole decides whether it exits at its drill point's shoulder exactly
Material past the depth needs a body with the point inside, air before it needs every body to
have it outside; a point within a body's tolerance of the exit face is neither.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* engine tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* ui, cli tests: probes ask for the exact point class
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel: Body::contains, the mesh test, is gone
Every caller asks Body::classify_point now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKQ2rEZvcXNQnhE3Sgs
* kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
chamfer_wider_than_sloped_basin_rim_builds and a_rim_loop_chamfer_running_off_its_rim_builds
waited for SMLib to build the cliff overflow (CloseRemovalRegion refused it,
SM_FILERR_NO_ROOM). The pinned SMLib builds it (eddf0ede4, bba9914b6): both pass on aarch64
Linux and are no longer ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
The gate on aarch64 Linux reports 16 fillet cases FIXED with the pinned SMLib: the sloped and
equal-slope basin rim chamfers and rounds past their rims (1080-*, 5835-*), the pocket rim
chamfer past the floor, and the three pocket rim rounds now mitred at the pocket's corners
(every-pocket-*). No other area's gate reports a case fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: the re-blend's removed picks formatted as rustfmt lays them out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: blend_smlib laid out by the 2024 edition's rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet: the radius-too-large choice in plain nouns
"If too large: Stop and say so / Largest that fits / Narrow where needed"
becomes "Face limits: Exact radius / Largest radius / Narrowed radius", in
every language of the catalog, with the error and the tip that name them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: a round that would cut through its wall into a hollow is refused
The owner's rule of 2026-10-30: a round running past a rim of its faces
into open air builds; one whose section would remove material through to
a hollow behind its edge (a slit into the hollow, a cut through the part)
is refused as too large, so the fillet names the largest radius that fits.
Decided exactly in the section of a straight convex edge between planar
faces: the round's centre is at depth r below both planes, and it opens
where its arc uncovers a boundary point strictly inside the wedge with no
material beyond it toward the centre (the body's exact point
classification). Looked at: straight edges parallel to the round's (a
hollow's corner), cylinders about parallel axes (a rounded corner), and a
picked concave parallel edge's own round, which fills the corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
The round's centre (32 - r, 42 - r) leaves the hollow's corner (30, 40)
outside its circle, opening the wall, where sqrt2 (r - 2) = r: the case
expects the refusal naming 6.828. 2852's R30, refused naming 25.24, now
passes too: both come off the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
`cargo xtask known-failing --junit PATH` reads nextest's junit (a file, or every .xml under a
directory, so all of a run's junit artifacts at once) and fails on a test that failed and the
list does not name, and on a listed test that passed (FIXED: take its line off, as the kernel
rig's gate does). A listed test that did not run is neither, since a pull request tests only the
packages it touches. The list has the rig's KNOWN_FAILING format (`<test> <cause>`, sorted, the
rig's own parser), with `<test>` nextest's `<binary id>::<test name>`; `cargo xtask lists`
checks it is sorted. The list starts empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
Native Linux tests and the GPU path test shards no longer fail on any failed test: nextest's
"tests failed" exit (100) goes to `cargo xtask known-failing --junit`, which fails on a failure
the list does not name and on a listed test that passes. Any other nextest exit (a build error,
a bad filter) still fails the step at once. The tests skill says to list a failing test with its
cause, in place of ignoring it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the known-failing list takes develop's 10 failing tests
Develop 38fd4a4f6 (CI run 41157648345, after the SMLib eaa998a pin) fails 10 cargo tests; each
is listed with the cause its failure message gives. Seven are SMLib refusals or results off
their derived volumes (fillet, chamfer and shell), the cli action matrix and naming corpus
among them; the two corner_g2 tests are the fitted G2 corner patch bulging past the box, which
the explicit G2 corner fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
Develop 38fd4a4f6's Reference tests fail 34, 35, 77, 78 and 81 (STEP export finds fillet edges
4.6e-5 to 6.1e-5 off their surfaces against 2e-5), 37 (the apex blend 0.193 off), 80 (the
taper-to-fit area) and 83 (thicken status 1001). Each expected.json names its cause in
known_failure, which the oracle already reads: a known failure that passes fails the job.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sweep path: a curve of several pieces is turned round whole
The path chain oriented its first piece, not its first curve: a first curve
of several exact pieces (a fit spline, an ellipse, a projected free-form
edge) was never turned round, so a path whose next curve meets it at its
start was refused as "not connected end to end". The chain now orients
curve by curve: the first runs toward the second where they meet at one
end only (else from the end nearest the profile), each next one starts
where the previous ended, with one joint tolerance for both questions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 2fc375f (tangency-labs/smlib#71, #72, #73)
A sheet's side is extended exactly the distance asked, or the call says it cannot (#71);
NVIDIA's -Werror build passes again (#72); a body splits by a sheet of several faces as it
is, smlib_split_body_by_sheet (#73). The C API is ABI 6 (the new entry), so the binding
expects 6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Extend grows a surface of several faces face by face
A surface body of more than one face (a fit-point spline's spans extruded, #3830) was refused.
Each face with a picked edge is now extended alone by SMLib's extension of its surface, and the
faces are sewn back together, each the face it was. A side that lengthens onto a face meeting it
tangent takes that face along, past its edge continuing the picked one; across a crease the
neighbour grows only when its edge is picked too, otherwise the extension is refused. Faces whose
lengthened sides no longer meet are refused. Up to a target keeps the pieces every grown face
lies in.
3830's extensions now build; its split still fails (the tool point picks one span, and a face
tool cuts with that face's surface alone), so it stays on the list with that reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
A face tool cut with that face's surface alone, so a face of a surface body made of spans joined
tangent (a fit-point spline extruded, #3830) cut nothing where its span ends inside the body.
Split Body by a face of a surface body now takes the faces joined to it tangentially (the exact
check Extend uses, within the one angle for smooth) and slices with them as they are, through
SMLib's slice by a sheet (smlib_split_body_by_sheet, tangency-labs/smlib 7a01f1b), its sides those
of the picked face. A sheet that only nicks the body cuts nothing, as before; a lone face, or a
face of a solid, still cuts with its surface extended.
3830 comes off the booleans list. Its answer counted the two halves of the cup and not the surface
that cut it, which stays as a body of its own (4879 removes its surface for that reason): three
bodies, the volume unchanged.
Needs SMLib 7a01f1b pinned (SMLIB_REV, prebuilt; its SMLIB_ABI_VERSION 6, which crates/smlib now expects) to link.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
The tangent and curvature run-offs of the quarter cylinder r 10 strip, 5 across the surface,
are its section swept 20 along z: exactly 10 pi/2 20 + 5 x 20 = 414.159265. measure is SMLib's
integration on the exact surface (1e-8), not a mesh, so the run-off check is 1e-6 relative and
the 'measured on meshes' notes go. Red until SMLib's extension is solved to its distance
(smlib-extend-converges 590d8a1): eaa998a's curvature run-off is 4.986 long, area 413.882.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a control spline can carry its own knots and weights
A sketch spline over control points was always the clamped uniform B-spline
over them, so a free-form edge whose knots are not evenly spaced (or whose
weights are not 1) could only come into a sketch as one curve per Bezier
span. A control spline now may save `nurbs`: its clamped knots and its
weights. Its points, polyline, exact pieces (one a knot span; conics for a
rational quadratic), the solver's distance and curvature, links, parallel
re-projection and inspect.sketch all read them; a loaded design's are
checked. One pending format file (spline-knots).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch projection: a free-form edge comes in as the one exact spline it is
A projected spline edge of several Bezier spans came into the sketch as one
curve per span (#1508), so a G2 round's bottom edge was 16 curves and a path
naming the corner named one span of it (#3604). The kernel now reads such an
edge (a spline, or an elliptical arc of several spans) as the one clamped
B-spline it is over the edge's interval, its knots and weights its own, and
the sketch takes it as one control spline whose ends sit on the edge's
vertices. Planar regions still read edges span by span. The 3604 case builds
with its original path and leaves KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
The owner's ruling: a round or chamfer that runs past an outer edge of its face into open air
builds, tangent where it has room and cut by the face beyond where it runs out. SMLib's branch
smlib-blends-past-rims builds them by the rig's analytic answers. Off the known-failing list:
the disc's rim past its 2 mm wall (190), the hole's top rim R12 past the plate's bottom, the
chamfer past the cylinder's bottom (2893), each closing on the wall continued as itself, and
926's chamfer ending on the boss's wall, which now builds to its answer too.
The sloped basins' R4 rim rounds (1080, mitred rounds built together where one overflows) build
to their analytic volumes (to 6e-9), and stay listed with that reason: their continuity check
(g1 at every blend seam) takes in the mitres' creases, G0 by the mitre ruling.
2893-chamfer-two-distances-elliptical-rim is graded as a solid (the owner: it builds) and stays
listed, waiting on the ruling on unequal chamfers along a rim whose angle varies.
5158-fillet-round-just-past-a-10mm-face stays listed with its cause found: the round passes
5e-6 under the box's top back edge, inside the body's tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: test that a round of a round's end has no seam with that round's faces
The r1 round of a block's top edge, chained onto the end curve of the r2
round of its arc at a cylinder (rig fillets/every-block-cylinder-crease-
top-edge-after-arc-round-r1), ends where it runs into the cylinder. That
edge is no seam of the r1 round: the cylinder is a face of the r2 round,
not of the r1. blend_seams takes it for one today (the r2 round's name
F3:blend:F1:+z|F2:side holds a | of its own), and the rig reads it as a
contact seam at 60 degrees.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: a blend's seams split its edge's name at the | between its two faces
A blend face's name holds the edge it replaced, <face>|<face>, and a side
of that edge can be a blend face whose own name holds a |. Whether a face
is a contact of the blend was read as the edge's name starting or ending
with the face's name next to a |, so the r2 round's own face F2:side read
as a contact of the r1 round F4:blend:F1:+y|F3:blend:F1:+z|F2:side. The
edge's name is now split into its two faces, a blend side read whole as
the two faces of its own edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet rig: five refused blends build, off the known-failing list
926 (the chamfer ending on the boss's wall), the oblique cut's r0.1
round, the every-block r1 round (its seam with the cylinder is no
contact seam, after the blend_seams fix), the up-down squares' concave
chamfers and the shelled box's lip chamfer build with SMLib branch
smlib-blend-refusals (f8650b8 and later). 1207 r0.5 passes SMLib's check
on its rails now and stays listed for the next cause: its end rib on the
boss, which starts where the round and the boss are tangent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the trough and the pocket whose floors fall to a drain build
SMLib now offsets a vertex where four faces meet (two walls and two facets at the floor's
corners, four facets at the drain) to two vertices joined by a new edge (tangency-labs/smlib
branch smlib-shells). Both volumes match their closed forms. The pocket's lining, hanging from
the top's rim round the pocket, stands apart from the slab's outer walls with the cavity rising
between them to the open top: the case says two shells in the one body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the plate with a hole through its arc side shells open at its far end
SMLib's merge now intersects the offsets of an edge's faces where they could not be mated along
it (the hole's offset poking out through the half-round side's; tangency-labs/solidcore#1795):
one closed valid solid with the one face open, as the owner ruled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the ring cut frame and the up-down join shell
SMLib's inset now keeps only the regions that are cavity, not the one the offsets close where
they overlap (between the two faces of #545's 0.5 floor, round the up-down join's two empty
octants). The frame's core under the recess is hollowed to a sealed void, so the case says two
shells and its closed form, 21044 mm³.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
SMLib keeps the skirt top's offset where its loops wind the other way under the opening, the
cavity's floor (the owner's ruling of 2026-10-31: build it; a lip thinner than the wall is no
break-through).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
The ring cut frame's and the up-down join's shells build now, and so do the up-down join's and
modern-plastic's chamfers (SMLib smlib-blend-refusals). #616's lid in the corpus still fails
SMLib's loop check, the shelled box shelled again at an inner wall is unchanged, and the
oblique cut of a cylinder's fillet still fails SmSurfOfRevolution's Test #7: 3 actions of 7.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib history test: every operand's order is the identity on its record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: rustfmt the board fixture example and the coplanar asserts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: fillets keeps one case per regime; 17 replications of a case in the same regime go
The sloped-basin chamfers and rounds at 0.5 mm rims repeat the 1 mm rim's regimes; two of the
three knife-edge chamfer tips, the r1 and box r3 curvature corners, the r1 tangent corner, the
1 mm pocket-rim and hole-rim chamfers short of the floor and the r1 together-round each repeat a kept case's regime
and grades. #854 moves to 851-chamfer-arc-top-edge-9-5, and the cases that cited a dropped one
cite the kept one or state its formula.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: five cases outside fillets repeat a kept case's regime and go
A square cut is the slanted plane's ordinary crossing; the cam's half turn is the quarter turn's
contact at a symmetric angle; the r15 slab stands inside the same coincidence tolerance as the r10;
the 90 degree unfold and the 40 degree flange repeat the 72 degree and 20 degree cases' formulas.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the two G0 window patches graded on the box the part they close keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the cut mirrored loft graded on the box its sections pin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases
wait for the new algorithm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by seams alone runs its loop the other way, never turns over
A loop that uses each of its edges once each way (a whole torus within its tube and ring seams)
is the same set of uses run backwards, so it says nothing of the face's side. One written
clockwise in (u, v) turned the face over, against its same_sense: the torus came in inside out
with a warning. Such a loop is now reversed and the face keeps its side.
Test: seam_only_torus_imports_as_a_whole_ring, both orders of the two seams, volume 2π²Rr².
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a face bounded by a slit alone is the whole of its closed surface
A loop that runs out along a chain of edges and straight back (a meridian from a sphere's pole
stopping short of the other, out and back) encloses no (u, v) area, yet on a closed surface it
bounds all of it less a cut of none. The reader only read such a face when the slit already ran
pole to pole (and moved the sphere's frame onto it only then), so the 2 mm ball whose meridian
stops at 2.5 rad was refused for its empty loop.
The slit is now made the face's seams, so its loop bounds the surface's whole domain: on a
sphere, a revolution whose profile ends on its axis, or a spline closed round u that collapses
at both ends, the slit's meridian is run on to both poles, out and back (a sphere's frame put
on the slit first, whichever two points it joins); on a torus, the circle the slit lies along is
closed and the other circle through its start is the second seam. The seams on a sphere are its
own meridians (angle 0 on the equator), so their pcurves are exact lines on its form.
Tests: non_antipodal_seam_sphere_imports_as_a_whole_ball passes (its known-failing line goes);
seam_only_torus_imports_as_a_whole_ring adds a torus bounded by a slit along its tube.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues:
the reported part's bar (with the sketch solver's residues) whose sides run tangent into the
cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face
bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight
box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch
stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg corner at r5 and r7
Two more fillet cases, the reported part's concave arc and front top edge rounded together at
r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's
tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the
bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: blends that end where their face runs tangent into another
Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far
end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent
into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top
tangentially there. Each blend ends on a face tangent to the one it rolls on.
- Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at
r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a
semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and
G1 seams, or the analytic volume where the blend has a closed section.
- Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along
x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after
the other (1 then 2).
- STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges
rounded together.
- A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator,
its front edge alone and both edges together.
The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic
cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not
along a seam, so it is not this ending.
On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status
1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5
out of the front face, and the rounds meeting with normals 180 degrees apart where their
contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted
peg (its corner refused as unsupported).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: fillet corners graded curvature-continuous, the default to be
Six fillet cases that pick their edges with no type, so they take the fillet's default, which the
owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as
an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body:
- an oblique convex corner (a block drafted 15 deg);
- a four-edge and a five-edge apex corner (pyramids lofted to a point);
- a pocket's concave corner;
- a mixed corner (a step: one concave edge, two convex);
- a corner beside a cylinder (the top corner of a half cylinder).
All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round,
whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two
rounds at 8.45 degrees (G0).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's front chamfer builds
With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge
crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that
carries that fix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the curvature-continuous corner cases pick the curvature fillet
The six corner cases added in 3a854104a took the fillet's default type, on the premise that the
default would become curvature-continuous. The default stays the circular round, so each case
now asks for the curvature fillet itself (type curvature: curvature-continuous sections and
corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one
valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*.
The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as
KNOWN_FAILING now says:
- the corner beside a cylinder: the curvature fillet builds its sections only between planar
faces;
- the four- and five-edge apex corners: refused because the default setback is shorter than
where the rounds' contact lines meet (3.90 and 3.51 mm from the apex);
- the mixed corner: SMLib sets back a corner only where its edges are all convex or all
concave.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the
concave chamfer's rail on the cylinder ends where it crosses the seam along which the front
face runs tangent into the cylinder, continued past the vertex, and its end rib on the front
face is built from there. report-peg-concave-chamfer-d2 and
report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two
chamfers together still fail, now at the mixed-convexity corner where they meet: its line says
so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168,
kernel lib only its listed failures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: constant rounds of the exact classes, and a tee's round
A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a
cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines
are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2),
(2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on
its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that
SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
The rounds now come as the rational surfaces their classes give, closed ones as two faces split
at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees.
Their KNOWN_FAILING lines go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
Twelve listed cases build on the new blend's end event and exact classes, or were already
built on develop: they come off the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the
round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and
graded on the exact volumes, and come off the shell known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
world_state, view::bounds, home_camera and scene return Result on develop; new
main code takes that with ? or session_world. New fixtures carry the spline's
nurbs. ForeignCopy::of returns Result. occurrence_placement_with walks the path
with its moves, since the placement index holds pending_moves only.
The hlr port is separate and still to come: this commit does not compile as it
stands in crates/geom/src/hlr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Drawings hidden lines: read develop's B-rep records
Edges come from the record's edge list, cut to their interval (C3::of_edge), and
faces from its face list; a cylinder, cone, sphere or torus chart takes its bounds
from where its NURBS form lies on its label (S3::of_face). A rigidly placed
revolution has main's revolution chart; other placements stay refused. Moving a body
to its centre goes through Brep::moved. Loops are read against the natural normal of
the face's parameters where a chart wraps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden-line fixtures: build develop's records from the fixtures' data
Fixtures keep their bounded curves and surfaces and their own edge numbers; a private
builder makes the canonical record, and the local prepare puts the edges back in the
fixture's numbering. Assertions are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: tests of the bounded edges, face charts and placed revolutions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* drawing-hlr doc: what is drawn and refused on develop's records
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* hlr tests: a placed revolution is refused when its placement is not rigid
The new model has one record for main's Revolution, which was drawn, and its
PlacedRevolution, which was refused. An identity placement is now the former, so
this test's fixture takes a non-rigid one. The refusal it asserts is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
A leader off either surface is refused like a curve with no spline to follow. Tests: a traced rim
drawn on the circle and plane within tolerance, the same leader 1 mm off refused, and kernel bodies
with arcs through the production prepare against closed forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Hidden lines: kernel bodies through the production prepare against closed forms
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Tests from main: the world state is a Result here
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A blend's pick measures close edges on their curves, not their polylines
A polyline can be a chord off its edge, more than two edges are apart near a
tangent point. A pick exactly on a ball's rim took the straight edge the rim is
tangent to, and solidcore built a chamfer of that edge with a clean check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
(cherry picked from commit c786db6bf4)
* Merge fixes from the first SMLib test pass
Model cache key covers the crates develop's kernel adds under doc (profile, smlib, step).
A piece taking a name also takes the feature that made it: SMLib lists a cut's pieces in another
order, and the swap left the name on a piece of the wrong feature.
A replaced analysis keeps its status slot. A command with no world picks does not place the model
first, so assembly.mass_properties answers for a flattening placement. FeatureCommon loses the
touching key the merge added; only the contracts that read it take it.
Two of main's tests listed as failing on SMLib, with why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Merge fixes from the ui test pass and the gates
Main's thread.direction keys go with develop's thread hand, which replaced them. Vietnamese for the
messages develop added while main made vi a complete catalog. CGA and 1-bit themes set develop's
comb and section hatch colours. A ribbon button with a persistent effect is pressed only while its
tool runs, so persistent_ribbon_pressed alone decides how its effect is shown; other analyses stay
pressed while on. Two of main's ui tests listed as failing on SMLib, with why.
Gates: fixed thread tables become slices, one collapsed if, rustfmt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* A silhouette takes its facing from the surface's normals
A flat triangle beside the outline can tip the other way from the surface it approximates, and its
edges joined the outline. On SMLib's sphere that made 192 segments instead of the equator's 64, 100
curves and 95 profiles from the tight fit of #7989. Each corner's normal is used where it is close
to the triangle's own; a mesh without such normals (none, zero, not numbers, or averaged across
creases) keeps the triangle's normal, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Clippy and rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Stepwise open checks every feature under the session's mode
OpenSteps::start evaluated under the default check mode, and finish kept those results under the session's mode: an each_step or off session opened in steps recomputed nothing. start now takes the mode (the app passes its session's), and a mode that changed before finish evaluates the design again under the new one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Clippy without SMLib: the planar-sheet edge reader is built only with it
Its one caller is in the smlib-only sheets module, so without the feature it was dead code and
clippy -D warnings refused the kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
Eight fillet cases for the blend's cross-section by its order of contact with the faces, each
graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next):
- a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the
areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default
thumbweight's definition;
- a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of
the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each
section's added area by Green's theorem along the plate, the section and the pipe's arc; the
order-2 section is built from the faces' feet of the point at distance d from both, which on
the pipe are not linear in d;
- a boss root curvature-rounded 2, the square corner's section revolved (Pappus);
- a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone,
and the volume is the cone's sections integrated along the edge.
Three fail today and are listed: the two curvature rounds whose faces are not a square corner of
planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the
variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib
7ac037e.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two
planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment
about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases
built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket,
every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their
volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x
up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the
distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and
G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on
the plate pass on SMLib's section and leave the known-failing list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a
square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests
and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate
from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed
until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4):
Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns
the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded
less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to
1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet
takes a turn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the
ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the
blend rework too) and the Y junction (refused for room at its triple points).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope
removes; the law with a corner is its own test, listed as failing until the corner step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
removed_by_balls integrates, in each plane square to a right-angled edge, the corner the union
of the balls leaves (by rays from the edge, the least entry over the balls), cut to the body's
section. The law with a corner through a middle point is its own test, listed as failing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel tests: a spline radius whose balls fold over one another at its peak is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within
1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed
as failing passes on SMLib's step 3 and leaves the list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
The new section builds their edges on the surfaces, so STEP export no longer finds them 4.6e-5
to 6.1e-5 off. develop's Reference tests (60393a718) report all three as passing while marked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
A sphere split into two halves along a circle about its axis, each half covering a pole with no
seam, gets a seam per half from the first vertex of its loop to the pole. The circles between the
halves group their frames so they turn together, and when the two seams are not a whole number of
quarters apart no one turn fits both: the group kept its frames, a half's form ran past one turn,
SMLib's trim (SMLib and solidcore alike) across the form's end crossed the face, and the mesh
folded over the ball (a rotor's ball showed torn; its half had 196 times its area in triangles).
When no one turn fits the group, each spilling face is now turned on its own to start on a quarter
line. On the rotor file this also clears three other faces that were filled leniently and a
0.076 mm edge gap; regression test in step_in/tests.rs with the area and volume of each half.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
(cherry picked from commit b3188e005d427043b918267449c2336a1777e54f)
* SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
A variable round is the envelope of the balls rolled along the edge, which takes less than a
quarter round in each section. The expectations are now that union, the law continued past the
edge's ends along its end slopes, integrated by Gauss-Legendre panels in x and t; 2, 4 and 8
panels agree to 1e-9 of the body's values, and 77's removed volume matches a brute-force union of
balls to 2.5e-10. The nearest-ball search now scans the balls the ray meets around ball x
(|x - s| < r(s) sqrt(sin 2t)) on their own, which near the faces and where 78's radius closes to 0
are narrower than the global scan's step. Regenerating keeps each case's known_failure. 79, a
constant radius, is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
SMLib builds a variable round's law corners as its balls' union (the corner
ball's zone at a dip, the sides' crossing at a peak): the kernel's corner
through a middle point (39.5410) and the crate's 4 -> 2 -> 4 law (39.5421) pass.
Rig 1207 (the bar's top edge rounded after the boss's arc, r0.5) builds and
grades on the same SMLib; it failed on c820346.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel rig: every fillet and chamfer case rounds its tangent chain
The owner's ruling of 2026-11-01: the rig and the ladder round with tangent_chain true, how a
user's default pick behaves. The 38 fillets-area recipes and the ladder's 07-fillets/016 and 018
that passed false now pass true. The shell recipes keep theirs: a shell's tangent_chain is its
open-face chain, a different feature.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
Where a case's point is one edge of a tangent chain rounded alone, a copy keeps tangent_chain
false as its own case (SMLib rounds exactly the picked edges, ending at the smooth vertex); their
expectations stay as they were, to be re-derived:
- fillets/1207-fillet-box-end-edge-into-unblended-round-partial-chain;
- fillets/every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain;
- fillets/1207-fillet-bar-top-edge-after-boss-arc-round-partial-chain, renamed from
...-no-tangent-chain: with the chain on it is exactly 1207-fillet-bar-top-edge-after-boss-arc-round,
which the rig already has;
- ladder/07-fillets/020 and 021, the r5/r3/r7 and r5/r3/r2 corners (016 and 018) with the r3 on
its edge alone: with the chain on, the r3 runs on along the r5 round's end arc and down the
vertical edge the third round was to take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
fillets/every-block-cylinder-tangent-concave-arc-r2-partial-chain: the pick takes one piece of the
concave half circle, which SMLib splits; with the chain off its other pieces are left out, and the
blend is refused at the piece's end (the base gate's outcome). With the chain on the case rounds
the whole half circle. The copy keeps its expectation, to be re-derived.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two chains that now build graded by their exact volumes
With the tangent chain on, two cases round more than the edge they pick, and their old
expectations were the single edge's:
- 1207-fillet-box-end-edge-into-unblended-round: the r1 chain is the end face's top edge, the r3
round's end arc and the back upright; 34 A + (pi/2) A (3 - c) by Pappus on the arc:
V = 7953.139216 (it built 7953.139216, the old 7957.505 passed only inside 1e-3), 10 faces.
- 851-fillet-top-front-then-front-left-upright: the upright's chain runs up the first round's
end arc on x = 0 and along the left top edge, so the corner becomes the R2 ball's eighth:
V0 less the first round's spandrel to the wall (35.344727) less 27 (4 - pi) + 2 pi/3:
V = 9530.777979 (built 9530.777987), 10 faces.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
- every-fillet-after-fillet-curvature-front-then-side-r3: the side edge's chain runs round the
first curvature round's end curve, whose radius of curvature has a weighted mean of 3 (its
setback) and is unbounded at the ends, so somewhere below 3: the size-3 blend's contact line
folds back on itself. Refused, "larger than the faces beside its edges allow", as ladder
07-fillets/016's r7 on the r5 arc. (It was solid or refused for running on tangentially.)
- every-block-cylinder-tangent-concave-arc-r2-no-tangent-chain: the chain takes every piece of
the half circle and ends at the convex edges it runs on into; it builds the analytic 19091.9620,
so the outcome is solid (the refusal alternative was the chain-off one's).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
851-fillet-arc-then-top-front and 851-fillet-top-front-then-upright: with the tangent chain on,
each R2 chain runs along the end curve of an R2 round on a curved face (the arc round's end on the
front face; the first round's end on the wall), where the rolling ball sits on that round's own
centre line, so the piece is the ball about (39.2538, -19, 8): the three-edge rolling-ball corner.
SMLib fails with status 1001; the same piece on a plane end arc builds (front-left upright).
Expectations unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
With the tangent chain on, 016's and 018's r3 runs on along the r5 round's end arc and down the
vertical edge, so the third pick (60, 40, 8) is 3 from both of that round's contact lines and
names no edge: refused, asking for a point along one edge. The corners they were made for are
020 and 021 (the r3 alone), whose golden entries are 016's and 018's (021 measured on f12a101).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
SMLib's Ball corner is always the rational patch exactly on the sphere (owner ruling, blend
design §23), so the corner counts as an 'other' face beside the three cylinders and six planes.
The removed volume still checks the corner against r³ − πr³/6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
The round's cylinder keeps the frame it was made on when it is turned (SMLib's SwapUV no longer
re-derives it): its origin sits at x = −20 on the same axis line, (x, 2, 8) along x, radius 2.
Same cylinder; one number in the record moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
On the CI runners the boss root and the hole rim, both size-2/size-1 curvature rounds, build
correctly but take more than 180 s: the order-2 section's span certificate and the round's
definition are evaluated station by station. The per-case limit is the one the thread cases use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Lid ring sketch test: find the ring under the pick, not by main's kernel's name
On SMLib the lip join's exact history names the lid underside's ring a piece
of the lid's own start (F14:start#[...]), as the naming rule says for a face
that came from the feature's input; main's kernel named it after the case's
top it rests on (F2:top). The test looked the ring up by that name and so
stopped before the attachment it guards. It now takes the underside piece
under the pick point, which the cap certificate attaches on either kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Viewport culling test: each box's triangles from its mesh, not 12
SMLib meshes a 10 mm box in 108 triangles, so the hard-coded 12 a box stopped
the test before it reached the culling. The expected counts are now each
body's span in the scene.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Timeline chip test: a fillet that really reduces
The R20 fillet with fit reduce on one top edge of a 10 mm box builds on SMLib
without a reduced-radius warning, so the fixture had no warned feature. It
now rounds the four vertical edges at R6, reduced to the full round (5), as
the copy-warning test beside it does, and checks the warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
A seam's two sides are the same face, and edge names list each face an edge
bounds once, so SMLib's extruded circle names its side's seam F2:side:c1, with
no separator. The name grammar now says one face also means a seam. The #5858
test no longer counts one '|' an edge: every part of every edge name is a
whole face name of the edge, one per face it bounds, two for the rims and one
only for the side's seam (checked to run bottom to top on the circle).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* rustfmt on the merged tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
SMLib's setback corner takes a G1 fill only once certified convex, and refuses a setback too
short for that as SMLIB_ERR_NO_ROOM with SMLIB_FIT_SETBACK_AT_LEAST, the smallest setback that
builds. The kernel reads it (solidcraft-smlib binds smlib_blend_fit_size) and names it; the
Fillet dialog says it in plain words. Other room refusals keep their words. The r5 box corner
set back 5.5 is refused naming 5.962, which builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
Each round runs whole to its section square to its edge at its setback (the owner's rule, at
least 1.5 r, scaled to the least at which the G1 fill is certified convex), and the hole is the
setback split: one patch per round and the triangle in three quadrilaterals, 15 faces, G1.
Outside the box the sections span the body is the three strips', so its volume is theirs within
that box's. A later r3 round at the mitred corner makes the body all three at once make
(7928.142563938, 15 faces), as the engine and the model-cache tests have it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
A primitive cut skips the sheets kernel::apart (exact bounds grown by the record tolerance)
finds clear of its tool; the bend check leaves the clear case to kernel::boolean, which answers
it from the same exact boxes with no intersection work. The mesh-box helpers are gone, and their
four lines leave xtask/mesh-decisions.txt (172 sites left).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Agents: AGENTS.md loses a stray merge-conflict marker line at its end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
Main made vi a complete catalog; develop's new message (ui.fillet_error_setback_short) had no vi
entry, so every_complete_catalog_carries_every_english_message failed on the merged tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
1213: the loft is a cubic skin through the five sections (ellipses between
them), not a torus; its volume 131601.597487935 by quadrature less the exact
rolling-ball removal 233.662461919 gives 131367.935026 (was a Pappus estimate
on a torus, 131360.148, at rel 5e-4).
4782: the section's area in closed form, 25 pi/3 - 5 sqrt(75) + 25, so
V = 630.2934873 (was a grid estimate, 630.293125).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
They take 37 s and 34 s alone on the box, but CI runs 8 cases at once on slower runners. Their
G2 certificate cost is the open item (tangency-labs/smlib#106, moved to solidcore#2344).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
Develop's list was taken on develop alone. Main's code (tap-marking reach, cut and hole box
checks, join pieces, print faces, placed measuring, selection items, imported mesh payloads) and
the branch's own exact_edges and named_vertex use meshes too; three listed functions were renamed
by main (face_outline and plate_recesses into FaceSlice, paste into build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* After the merge: main's new tests on the SMLib kernel
- Cut To the far side of a curved wall (#8634): the tool stops past the first crossing of the
face ahead of the profile; SMLib's whole bore is one face that a line crosses twice, so the
single-crossing rule found none and the cut took nothing.
- Clearing view analyses goes through refresh_display, as main's #10687 made the others, so an
open feature editor keeps OK and Cancel after Zebra.
- vi, a complete catalog on main, gets the setback-too-short message.
- fillets/KNOWN_FAILING: 4782's cause is now its continuity check (SMLib f916a8d builds the
expected volume).
- Known failing, as main's tests assume truck: the spline wall's spans as one mesh patch, a
hole touching an edge at a point leaving one body, and a copy of a copy's triangles matching
a fresh mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
A twist about a straight path maps a profile circle centred on the path's
line onto itself, so its swept wall is exactly the cylinder. The skin
through the stations stayed within 3.9e-9 of it (6.6e-9 on the outer wall),
and a boolean with another body on that cylinder failed with status 1001
(solidcore#2184; the kernel's handling of a B-spline face lying on a
cylinder stays open there).
sweep_controlled now builds those walls exactly when the path is lines
along the profile's normal and there is no end scale or rails: a profile
whose every loop is such a circle is swept untwisted, and such holes in
another outer loop are cut as exact cylinders from the skinned sweep of
the rest. Other loops, and an axis-centred arc inside a loop of other
curves, are skinned as before; a failed cut falls back to skinning all.
Regression test in smlib_sweeps_tests.rs: #2184's tubes joined at 10, 16,
18, 20 and 30 degrees give one closed body of 11.5625 pi with cylinder
walls; a twisted hexagon with the bore keeps a cylinder bore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU
* After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- `hole_misses` (main's #10701, through brett's branch) decided from the targets' mesh boxes. It now uses their exact boxes (`Body::exact_bounds`). An unknown box still leaves the hole not known to miss.
- With #10303's two shortcuts and `hole_misses` off the mesh, `body_box`, `mesh_box` and `padded_box` have no caller left, and are deleted.
- `project`'s intersection link passes its one face to `meeting_edges` as a one-element patch. This branch picks one face, not #9009's mesh patch.
- xtask/mesh-decisions.txt drops the six sites that no longer use a mesh here: `apply_traced_with`, `cut_end_past_face`, `beyond_cylinder_reach`, `hole_misses`, `body_box`/`mesh_box`/`padded_box`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
`frames::split_move` returns a Result on this branch: an unplaceable model is an error, not a silent no-split.
- Move/Copy of a component (main's #9914) propagates it, as its other calls do.
- `to_local` had the solid.move check twice after the merge (brett's Option one and ours). Ours stays, after the no-picks/not-placed return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge: main's two new tests take world_state's Result, as the rest of their files do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it.
Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere:
- Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre.
- Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`.
- STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included.
- Iso curves and SSI of the label are refused; the face's form is what evaluates.
Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds.
Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Since f916a8d:
- #120: every target again, plus the warnings fix;
- #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit;
- #122: tests gated on counts;
- #123: the Mixed corner;
- #124: the End at a smooth vertex;
- #125: four or more rounds, and open setbacks;
- #126: the equal-area thumbweight guard;
- #127: the trunk merge.
The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* smlib export tests: rustfmt's line for the rounded cube's edge midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all.
New failures, recorded as they are, each with its reason. They passed on f916a8d.
- **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume.
- **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only.
- **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added.
Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input:
the union's post-process keeps pointers to edges it has deleted. A golden
entry's `unstable` reason makes the gate compare that case's status only
and name it in its output; recording keeps the reason, and only an edit of
the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* After the merge with main: its new code on develop's exact bounds, types and thread fields
- The sheet cut's cull (#10301) and the tapped wall's (#10227) use each
body's exact box (`exact_box`), not its display mesh.
- model.threads replies with develop's thread fields: form, hand (right,
left or both) and starts.
- surface.boundary's schema checks a network curve's continuity as the
handler does, and words a list entry's error as it does.
- Main's new tests take develop's Hole fields and world_state's Result.
- mesh-decisions: contact_sweep's triangle check is now `depth` (main
split `hits`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now
Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that
passed on f916a8d, and passes two listed ones. Each new line says what the
test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause.
shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and
oracle 37-pyramid-apex-blend pass and leave their lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's six new sketch-only commands are exempt from a kernel case
sketch.construction_line (and its horizontal and vertical forms) and
sketch.spline.insert_point, remove_point and reverse change only the 2D
sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- The per-target cut loop skips a body whose exact box lies clear of
every tool's, as main's version did with mesh boxes. The sheet culls
(#10226, #10301) and this one now leave the far sheets and bodies alone:
a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the
known-failing list.
- a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face:
a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is
far past the bodies' tolerances); touching and 0.1 mm in still cut.
- Known failing, with reasons: main's edge lookup by a stored point
(#11286, on the display mesh) is not taken; SMLib refuses the
wrong-way chamfer for its tangent chain first.
- EXEMPT: main's eight new sketch-only commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
62 of the commands main added change no geometry: the view and render
panes, rendering lights and results, appearance tools, settings profiles,
point clouds (drawn as points, never a body), the selection, two sketch
edits, component links and History bar visibility, edit.repeat,
timeline.play, inspect.compare_picture (a picture against the outline),
and component.paste_from_design, which pastes the app's cross-window
clipboard that no command fills. Each joins EXEMPT's first section under
its family's reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: construct.plane.axis_point gets construction cases
The plane through a box edge and its far corner, graded against its
closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal
of a point on the axis.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass
0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2
by the parallel-axis theorem.
- occurrence.align: a block's end face onto a base's top face: a quarter
turn about y, centre (70,20,20), box (65,15,10)-(75,25,30).
- joint.find_limits: a slider between two stops: min -20, max 10 mm.
- component.move_features, browser.reparent and
component.move_sketches.to_parts: items moved into a turned and moved
part keep their world place (volumes, centres and boxes by hand).
The mass case assigns a material it creates, so material.create and
material.assign leave EXEMPT. PATHS names the new command modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Kernel rig: export and print face cases in the import area
- file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box
written and read back (the meshes converted to a solid): V 6000,
A 2200, 6 faces, box (5,-10,0)-(35,10,10).
- file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints,
and the base's mesh, written in metres, reads back as the
1 x 0.5 x 0.2 box (V 0.1, A 1.6).
- body.print_face: a cylinder's flat end is accepted, its side refused.
PATHS adds the URDF writer and the print face modules.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: brett19 <brett19@gmail.com>
39 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. These commits sit on several merged branches, so the wave holds their combined result.
- 1b17dd7f5 brett19: Merge fixes: every crate and test target compiles on the merged tree, but for crates/geom's hlr
- 8f2c11da2 brett19: Drawings hidden lines: read develop's B-rep records
- c30ca0216 brett19: Hidden-line fixtures: build develop's records from the fixtures' data
- 5dd2509ae brett19: Hidden lines: tests of the bounded edges, face charts and placed revolutions
- 1642df0ea brett19: drawing-hlr doc: what is drawn and refused on develop's records
- ddcb80c8e brett19: hlr tests: a placed revolution is refused when its placement is not rigid
- e4977721f brett19: Hidden lines: a traced intersection is drawn only where its spline lies on both surfaces
- b3ef6ae52 brett19: Hidden lines: kernel bodies through the production prepare against closed forms
- 4cd2ae062 brett19: Tests from main: the world state is a Result here
- 51d7ad09e brett19: A blend's pick measures close edges on their curves, not their polylines
- 11a89713c brett19: Merge fixes from the first SMLib test pass
- 48fcb7aac brett19: Merge fixes from the ui test pass and the gates
- abd739855 brett19: A silhouette takes its facing from the surface's normals
- 85114c5a2 brett19: Clippy and rustfmt on the merged tree
- 55a46569f brett19: Stepwise open checks every feature under the session's mode
- 4627402e4 brett19: Clippy without SMLib: the planar-sheet edge reader is built only with it
- 5fbece0ac brett19: STEP import: a ball's halves whose seams are off each other's quarter lines each form within one turn
- eb78d20b0 brett19: Lid ring sketch test: find the ring under the pick, not by main's kernel's name
- 3048d8c49 brett19: Viewport culling test: each box's triangles from its mesh, not 12
- dc88b80e2 brett19: Timeline chip test: a fillet that really reduces
- 876203621 brett19: Edge names: a seam names its one face once; the curve-id test reads every edge kernel-neutrally
- 900635710 brett19: rustfmt on the merged tree
- b7e83cd7c brett19: Known failing on SMLib: two of main's new tests assume truck's box mesh and fillet torus
- 63bde053a jyviko: Locales: Vietnamese for the setback-too-short refusal, now that vi is a complete catalog
- 967a1caa6 brett19: Kernel rig: exact volumes for 1213's bent-tube round and 4782's bar round, rel 1e-6
- 82c821d2a brett19: After the merge: clippy's auto-deref, and the mesh-decisions list for the merged tree
- 5862ee223 brett19: After the merge: main's new tests on the SMLib kernel
- be78372b2 brett19: Twisted sweep: circles about a straight path are exact cylinders (solidcore#2184)
- 312d14500 jyviko: After the merge: a hole that misses is found by exact boxes; a face is a one-face patch; main's mesh-box helpers gone
- 6f7e51acb jyviko: After the merge: split_move's Result reaches its callers; to_local's duplicated move check goes
- 8f0c79b20 jyviko: After the merge: main's two new tests take world_state's Result, as the rest of their files do
- 5f4d70061 jyviko: After the merge with main: its new code on develop's exact bounds, types and thread fields
- 2b2ab6627 jyviko: Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
- e6a4b0a9a jyviko: Kernel rig: main's six new sketch-only commands are exempt from a kernel case
- 5acbd2e71 jyviko: Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- d2b202307 jyviko: Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
- 21db090ba jyviko: Kernel rig: construct.plane.axis_point gets construction cases
- c1f45cae2 jyviko: Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- 084695416 jyviko: Kernel rig: export and print face cases in the import area
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e01031bc jyviko: smlib export tests: rustfmt's line for the rounded cube's edge midpoints
- c29190ec3 jyviko: Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
- 62d372cc1 jyviko: Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
- 2bf58241f jyviko: Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A join that reports no history names faces by comparing the meshes before and
after. When the join makes the body bigger, round walls are meshed differently
and miss their old mesh at the naming tolerance, so they were named as the new
feature's faces. A curved face with no match now looks again within the two
meshes' chord tolerances. An edge name saved while a wall had the wrong name
falls back to the edge at its stored point.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: instances stepped in from an arc stop where the arc runs out, not turn round
Each instance after the first takes its side from a point one more step
past the last one. Stepping toward an arc's centre past an arc smaller
than the distance, that point lands beyond the centre, and the side was
read by comparing the point with the two offsets at the full distance:
the one toward the centre doesn't exist there, so the other won and the
next instance went back out onto an earlier one. The side is now read a
hair from the curve, where both offsets exist, and the point stops
halfway to the centre. The arc then runs out of room and the command is
refused there, as for a ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offset side: read off the picked line or arc itself
A tiny step compared at large coordinates rounds away, and an arc left
smaller than that step by an earlier instance still has no offset toward
its centre: both turned the side round. A line's side is now its
half-plane and an arc's inside or outside its circle, as a circle's
already was; other curves compare both offsets' distance as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9687
* Joints: Edit Joint and Unsuppress meet a conflicting loop joint as Joint does (#9687)
joint.create (#10371) turns an angle a half turn when a new loop-closing joint
comes out as a conflict, so a second planar joint whose faces point the same way
meets. joint.edit never did, so a design saved before that (the report's rail on
two planar joints) kept the conflict however the joint was edited, and a joint
unsuppressed after its part was turned away stayed one too, though Move's hint
says to edit the conflicting joint.
An edit that places the joint again (type, offset, angle, flip, a side, or
unsuppressing it) now tries the same half turns. A rename alone moves nothing.
* Joints: a loop group over the solver's values still moves the loops that need to (#9687)
A frame held by many planar joints (the report's printer: six planar joints
between two profiles, and more) ties its loops into one group through the
shared values. Past MAX_LOOP_VALUES (64) such a group was only checked, so a
new joint closing a loop in it (Joint35, the rail on the 450 mm profile, which
took the group from 63 to 69 values) stayed a conflict, and nothing in the
group could be driven or dragged any more.
Such a group now moves the values of the loops that need to move, those open
at the start or reading a held value that moves, when they are few enough,
while every loop of the group stays a residual, so the others stay closed.
Groups within the cap solve as before.
* Joints: closed loops through a moving value follow on their own closing joint (#9687)
In a loop group over the solver's values, a closed loop that runs through a
value the open or driven loops move (a part slid on one planar joint and held
by a second) kept its closing joint's values, so its gap opened and the solve
failed. Those closing joints' values move too: they are on no tree path, so
freeing them pulls in no further loop.
* Joints: loops a motion link ties to a following closing joint follow too (#9687)
A followed closing joint whose value a motion link sets moves the value its
link chain starts from; closed loops through that value now follow on their own
closing joints as well, until no more do or the values pass the solver's cap.
* Joints: say what the narrowed loop solve does not find (#9687)
* Joints test: measure the peg's 30 degree turn from where the loop left P0 (#9687)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* Arabic: one spelling of component in the Components from Bodies hint, history filters, delete prompt and appearance help
The catalog writes component as مكوّن (with shadda) in 68 places; five
messages used مكون. They now match.
* Arabic: included-settings label and computer term in the profile rows
* Arabic: tanween spelling in the components-start-open note
* Arabic: OK button name in the Find Limits hint
- Les motifs rectangulaire et circulaire prennent bodies et nomment leurs copies source (2), (3)…, en sautant les noms pris
- Motif de features : nouveau BodyN, comme le miroir ; noms lus dans created_bodies
- Miroir d'une copie : suffixe ajouté ; body.rename pour des noms stables ; renvoi à #8194
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* Keys: a sketch and the model kept apart on Scope
`command_for` fell back to the first enabled command bound to a key, so a model key pressed in
a sketch (F, Fillet) still ran the model command. A key now runs only a command of the scope
the view is in, or one that works everywhere; otherwise nothing fires. Inspecting, views and
file commands (`inspect.*`, `view.*`, `file.*`) count as everywhere, so Measure's I still works
in a sketch. #4432's `sketch_and_model_keys_are_kept_apart` is ported to `Scope`.
Not ready: main's `the_extrude_key_in_a_sketch_finishes_the_sketch` (#2815) expects E in a
sketch to finish it and open Extrude, which this rule stops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keys: keep model keys out of sketches as an opt-in preference
The strict sketch/model split is now Preferences > Shortcuts > Keep model
keys out of sketches, off by default. Off, a key resolves exactly as on
main (a feature key such as E still finishes the sketch). On, a sketch
runs only sketch keys and keys that work everywhere (inspect, view, file).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Redesign Appearance preferences
* Reach the theme Import card by paging the carousel in the VFS import test
The redesigned Appearance page puts Import as the last theme carousel card,
so the test scrolled the page to a card that was not drawn. Page the carousel
until the card is on screen; both the in-scope and out-of-scope picks are
still checked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A hole in a design with sheet metal first tried to bore every sheet of its
component, building each panel and running a boolean on it, and then
checked every sheet again to see whether the drill met it at all. For a
sheet far from the hole both only found nothing: with 50 sheet parts that
was most of a hole's time. Now a sheet whose box lies clear of the
drill's box is left out of both, with the same grown boxes the other
sheet cuts use, so a drill into a sheet's rim still bores it. A drill a
sheet would refuse whatever it meets (an invalid one, or one more bore
than a sheet may hold) is still put to every sheet as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The countersink tool was a cone started at the run-on height above the
face, so above the face it was wider than the countersink and kept
widening: a wall or step just past the rim was notched. The tool is now
one revolved profile: the cone from just above the face down into the
hole, and above it a cylinder of the countersink's own diameter. The cone
is the profile's first segment, so its face keeps the name csink:side:0.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7410
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Break: break at a shared point separates the curves that meet there (#7410)
Two lines drawn as one chain share their corner point. There was no way to pull them apart:
Break there said "nothing to break at there", and deleting the point deleted both lines.
sketch.break aimed at a point where the picked curve ends and another curve also meets now
gives the picked curve its own end there (`<curve>.start` or `.end` when that id is free), at
the same place: both curves stay where they are and are no longer joined. The Break tool
snaps a click on the corner to that point, so clicking it works the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7584
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* macOS update: say to quit SolidCraft before replacing it (#7584)
After Download and open, the update window told people to drag SolidCraft
to Applications, replacing the old copy, then restart it. Finder refuses to
replace an app that is running ("the item “SolidCraft” is in use"), so the
message now says to quit SolidCraft first, then drag the new copy over and
open it again. "Quit" rather than "close": closing the window on macOS can
leave the app running.
The id update.dmg_opened is unchanged; every catalog that carries it is
updated, and the user guide's update tables get the same step.
Fixes#7584.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10909
* Crash report commands: input and output schemas (#10909)
diagnostics.crash_reports, diagnostics.crash_report,
diagnostics.crash_reports.clear and diagnostics.crash_test get typed
contracts and reply types in schema/diagnostics.rs and leave
unconverted.txt. Strict now refuses an `id` that isn't text on clear,
which the handler reads as no id and so deletes every report.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10898
* Standard views and Normal To: input and output schemas (#10898)
view.front, view.back, view.left, view.right, view.top, view.bottom,
view.isometric and view.normal_to get typed contracts (an optional
`camera`, read by the new shared CameraParam type with the commands' own
reader) and a CameraReply output, and leave unconverted.txt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
edit.undo, edit.redo, edit.checkpoint and edit.restore_checkpoint get
input and output schemas in schema/edit.rs: the first three take no
keys, the last takes `checkpoint` (with the handler's message for a bad
id) and `forget`. The handlers build their replies from the reply
types. Their lines leave unconverted.txt.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10938
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Library commands: input and output schemas (#10938)
library.inspect, library.export and library.apply get typed contracts
and reply types in schema/libraries.rs and leave unconverted.txt. The
handlers' own serde parameter types move there and become the
contracts, so the contract is exactly what each handler reads; the
catalog, provenance and apply result schemas are written by hand, since
solidcraft-io doesn't use schemars.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10942
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List Edges, List Faces and List Threads: input and output schemas (#10942)
model.edges and model.faces take a typed `body`; model.threads takes no
parameters. Their replies are built from ModelEdges, ModelFaces and
ModelThreads in schema/inspect.rs, with the same JSON as before, and the
three commands leave unconverted.txt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10949
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Curvature comb, minimum radius, isocurve, centre of mass: schemas (#10949)
The four analysis commands get typed contracts and reply types in
schema/sketch_inspect.rs and leave unconverted.txt. Each point list has
its own type with its handler's messages and reads only as many points
as the handler does; `count`, `density` and `scale` read numbers as
params::num does. The replies are built from the types, with the same
JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11059
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration table, rules, activate and preview: schemas (#11059)
config.table, config.rules, config.activate and config.preview get typed
contracts and reply types in schema/config.rs and leave unconverted.txt.
A new `table` builds the table from ConfigTable; show and the activation
build their replies from it, so the unconverted config commands still
return the same JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11083
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Boundary Surface: input and output schemas (#11083)
surface.boundary gets a typed contract in schema/surface_boundary.rs and
the shared FeatureResult as its output, and leaves unconverted.txt. One
struct holds both forms; each key reads as the handler reads it, with
its messages, and `u` and `v` check their items where the handler does
without the design, index included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10959
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Loose Ends and Tie Loose Ends: input and output schemas (#10959)
sketch.loose_ends and sketch.loose_ends.tie get typed contracts and
reply types in schema/sketch_ends.rs and leave unconverted.txt.
SketchTarget reads `sketch` as sketch_store::target does and PointIds
reads `points` as the tie does, each with the handler's messages. The
replies are built from the types, with the same JSON as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #11075
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of Materials: input and output schemas (#11075)
assembly.bom gets a typed contract and reply types in schema/bom.rs and
leaves unconverted.txt. Each key reads as the handler reads it, with its
message; the reply is built from Bom, BomRow and BomChild, in the old
field order, so the reply and the files it writes are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #6843
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Sheet metal: material joined in the plane of a panel is kept (#6843)
An extrude join through sheet metal went through the generic boolean:
the body grew, but the sheet model didn't, so the flat pattern, DXF and
bend table were refused, and the next sheet feature (a refold) dropped
the material ("what ... changed is not kept").
An untapered extrude join one sheet thick in the plane of a panel (the
base or a flange's panel, unfolded or folded) now joins the sheet model:
each region of its sketch becomes part of the one panel it is one piece
with, apart from every bend zone and the other panels, so the flat
pattern, its DXF and a refold keep it, and it follows its sketch's
parameters as a cut made there does. Cut-outs it covers are filled. A
join of another depth, out of every panel's plane, touching a bend zone
or another panel, or over a pocket, label, bore or perforation keeps the
generic path and its warning.
The extrude records its sketch plane and depth for a join too (its
profile grows into the material it joins, so it never counted as
untrimmed). The test that refused a joined tab beside a plain base now
refuses a block standing on the sheet instead; the tab is kept.
Fixes#6843.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On the Blacksmith CI runners two quick same-size writes can share a modification time, and a
stale review page once accepted changed art there
(test_changed_art_reopens_and_requires_deliberate_current_acceptance failed intermittently).
art_rev() now hashes every file by content on main (b622a466); this test keeps it that way by
giving an edited SVG its old timestamp back and checking that the stale page is refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5968
* Joint dialog: Find Limits fills the limits from where parts collide (#5968)
joint.find_limits sweeps each value of a joint both ways from where it is,
on a copy and with its own limits left out, and answers where the parts it
moves first touch another part, where a closed loop stops closing, or that
nothing is met within a turn (angles) or the parts' reach (distances).
Edit Joint's Limits section gets a Find Limits button that runs it on the
joint as the dialog has it, off the window thread, and fills the rows.
joint.sweep now tells touching bodies apart from the other bodies of the
same two parts: on the Hinge Assembly sample the pins touch where it starts,
and the plates used to pass through each other unnoticed.
* find_limits: read the session only
* find_limits: a joint with nothing to meet, edits during a search, tiny ranges
* find_limits: keep touching at the start per pair of parts
Per body, the Hinge Assembly sample's plates, which only come flush in
the end plane the two leaves share, stopped the search. The leaves never
pass into each other: the sample's answer is a whole turn.
* find_limits: touching boxes cost no collision work; stale results and rounding
* find_limits: each pair of bodies of resting parts held to its own depth; loops without bodies
* find_limits: a 32-bit budget it can pass, a repaint with the result, a bad form says so first
* find_limits: each pair of resting bodies gets its own margin
* find_limits: Arabic, Hebrew and Vietnamese strings (complete catalogs on main)
* find_limits: search the joint with Edit Joint's side picks
Edit Joint now keeps the joint's sides as picks in its inputs, and its OK
commands compare them with what it opened on. Built without them, the
commands Find Limits applies first asked for the sides again, so every
search failed.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
A tapped hole looked for the cylindrical wall its marking lies on in
every face of every body of the design, measuring each face over all of
its body's triangles. A body is now passed over when the drill line,
widened by the hole's radius and a margin, misses its box (from the
mesh it keeps, which the wall's triangles are part of): no face there
can be the wall, so the marking stays the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8151
* Opening: a design saved by 0.24 keeps the body a Join To Object runs to (#8151)
Since 0.24.1 a Join extrude To Object also joins the body it runs to
(#6424). Designs saved by 0.24.0 and earlier were built without that,
so on 0.25 the reported box swallowed its lid: the lid's sketch, the
holes, the cut and the moves after it failed.
An extent may now save `to_body_apart: true`, which leaves that body
apart. One pending format change sets it on every Join extrude To
Object of a design of format 39 or older as it opens; designs of
format 40 and later keep the join. Editing the extrude keeps the field.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A pattern or mirror replays its source hole's definition, so a hole with
reference edges finds its centre again from them. That happens after the
hole is drilled: through the part, the centre is then in the opening, and
the check that the centre lies on the face refused every copy. The replay
now skips that check; placing the hole itself still makes it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Before a cut ran, every sheet metal body of its component went through a
boolean with the tool, to make sure the cut would not take material the
flat pattern cannot keep. For a sheet the tool does not reach, that check
only found nothing: in a design of 50 sheet parts it was about an eighth
of a hole's time. Now a sheet whose box lies clear of every tool's box is
left out of the check, with the same grown boxes the cut itself uses
(#10225), so a tool that touches or grazes a sheet is still checked.
Sheets shown in another frame and Intersect are checked as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9274
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: placements start closed (#9274)
A large assembly opened with every placement unfolded, so the browser was a
long list to scroll through. Placements now start closed; opening one shows
its own placements still closed, and closing and reopening it leaves them as
they were. Find in Browser, a pick in the view, Expand All and Collapse All
open and close them as before.
Preferences > Interface > Components start open (browser_components_open)
keeps every placement open from the start, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: scenarios and the icon audit open placements, which now start closed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: tests that read rows inside placements set the open-placements preference
Three tests added on main since this branch started (joint folders, Features
folder marks, group rename) look at rows inside placements, which now start
closed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* PR rules: a title has to make sense to someone who never saw the chat
Agents write PR titles from inside their own context, or copy the issue's title, so a maintainer reading the list can't tell what a PR does. AGENTS.md, the contributing skill, CONTRIBUTING.md and the PR template now say who a title is for and show an unclear and a clear one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K14jA88xLsBfMkWo4Da5uh
* PR rules: write PR text in plain, literal English, and use a clearer example title
The first example still said "that window", the kind of pointing word the rule bans. The new rule takes the useful parts of Simplified Technical English without its approved-word list, which doesn't fit CAD terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01K14jA88xLsBfMkWo4Da5uh
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With a profile or face picked, clicking a face, vertex or parallel plane that is
not in the profile's plane now sets Extrude to To Object, not one more profile.
Clicking into the Profiles box first makes the next picks profiles again.
Preference extrude_auto_to_object (Tools) turns it off.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A pull request now starts by saying what it is in plain words, and shows
anything there is to look at in its description. A file in the diff
doesn't count. The new Picture check fails a PR that adds to the showcase
or docs/screenshots without showing a picture. It isn't a required check.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3902c954 jyviko: SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The editor reused the new-hole Face input, which is multi, so a second pick
appended and OK silently kept the first. Editing now makes that input single,
so a pick replaces the place.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
`sketch.rectangle.rounded` read `p0` and `p1` with `req_vec2`, so a corner typed as an
expression (`["W / 2", "H / 2"]`) was refused with "`p0` must be a point [x, y]", although the
2-point rectangle it hands the corners to already places expression corners and keeps them
following their parameters. The corners are now read with `corner_arg`, as the 2-point and
center rectangles read theirs; the worked-out values still check the radius against the sides.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A value typed before its target opened the box 18 px right and 10 px below the
pointer, so its frame covered the geometry a click was about to pick. Near the
viewport's right or bottom edge the clamp then slid the box back over the
pointer, losing the gap where it mattered most. It now keeps a 30 px gap, and at
an edge it opens on the pointer's other side instead of sliding back.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Convert to Sheet Metal refused a tray made with SolidCraft's own sheet metal, exported and
imported again: its walls run on past each bend's end (notch, tear and round corner reliefs), so
the edges beside the bend cylinder's edge never reach the other face's plane and the face could
not be trimmed ("a face beside a chamfer picked as a bend does not reach the face across it").
Where that edge is round or runs on along the bend's line, the face now keeps its corner and
steps down square to the other plane, a step the bend's setback takes up again; the inset drops
an edge the setback leaves shorter than the tolerance.
Test: trays_of_its_own_sheet_metal_convert_back (notch, tear and round, the walls made in one
flange feature, and notch and round with the short walls in a second one): the volume, the flat's
size and outline area and every bend's length are the source's.
Fixes#7529.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6452
* Engine: a pattern or mirror copy of a join keeps its ends as drawn (#6452)
The copy's tool is rebuilt against the current state, which already holds
the source feature's own material; the embedded-join-end trim (#2059)
read that material as the target already filling the copy's bottom band
and trimmed it away before the copy matrix was applied. Mirroring or
patterning a join on a hollow part silently lost the floor-level slice.
Copies now skip the trim: their ends are where the source drew them.
* chore: re-trigger duplicate PR check
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Breaking a dimensioned line left the length on the first piece, which the solver stretched
back to the whole length, skewing the line. A cut on (or a hair from) an end, as where a tangent
arc meets a line, made a zero-length piece with its coincident and collinear ties every time
Break was clicked there.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Redesign General preferences
* Update Preferences regression fixtures and gallery coverage
* Keep measured Preferences faces out of neutral exclusions
* Keep the profile name entry in Preferences search results
The redesigned Profiles section had no search-visible control, so a query
such as "profiles" dropped the whole section and the name field could not
be reached with a search active. Report the entry row as a hit so the
section stays on the results page, and point the typing-focus regression
test at the redesigned "Profile name" field and "Save as new" button. It
still checks that typed profile names stay out of the search box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The refusal of sketch.project ended in "face of " with nothing after the
"of" when the reference named no body: a picked face, edge or vertex is
found by its geometry, so the body it belongs to is not in the reference.
LinkSource::describe() now drops the "of <body>" when there is no body to
name and names the kind alone ("face", "edge", "vertex", "spun
profile", "isoparametric curve"). A source that names a body keeps its
name.
Only the text changes: the command refuses exactly what it refused before.
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A hole placed on the side of a cone with no direction drilled along
the nearest display-mesh triangle's normal, up to 2.6° off the
surface's normal and sideways. Planes, cylinders and spheres already
gave their exact normal; cones and tori now do too, from the surface
the kernel reports for the face.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #11080
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: the shader compiles in browsers again (#11080)
The ambient occlusion turn added in #9335 mixed `<<` and `|` without
parentheses. naga accepts that, so the desktop app ran, but browsers'
WGSL compiler refuses it: the sc_viewport module was invalid, every
pipeline built from it failed, and the web app drew nothing once a
design was open. The line gets its parentheses, and a test checks every
shader in the repository for the rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Move to Component: a sketch on a face inside the moved part goes along (#11063)
A face attachment stores the placement path it was found through. Moving
the placement into another component changes that path, the stored one
no longer starts at the design, and the move was refused as breaking
the sketch. Face attachments of sketches and construction planes, and
an emboss's face, now follow the move as the session's paths already do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move to Component: attachments made through any placement of the old parent follow
A parent placed more than once is one definition: a face attachment made
through another placement of it than the one named also ran through the
moved placement and broke. Every stored path through the moved placement
now runs through its new place. A path that would grow past the 64
placements a design keeps is refused instead of saved unreadable.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A flange picked on one segment of a stepped base outline ran the base
face's whole length: trimming the picked edge back to the bend line
merged it with the outline's own edge on that line beyond the step, and
the flange took the merged edge. It now stays off the base's edges that
already lay on the bend line, so it spans the segment picked, with no
relief there: the base is already back at the bend line. The same
outline made by cutting notches into a rectangle gave the right flange
already.
Assisted-by: LLM
* Sketch: a dog bone's outline outside it meets outside both notches (#10984)
Where two tangent arcs touch at a cusp, the copies of the two arcs cross
twice, both crossings as far from the cusp, and rounding chose one: on
one side of a dog bone the outline ran both copies on and drew a loop
into the bone. Such a tie now takes the crossing that cuts both copies
short.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dog bone test: the outline goes outside, away from the picked bottom line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Rename: a refused inline rename keeps the editor and says why (#10654)
commit_rename dropped the command's Result, so a refusal closed the editor
with no message and left the old name. It now returns the error, shows it in
the status line, and the inline editor stays open.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* Rename: keep the command's status line when the editor stays open (#10654)
The command completion already explains the refusal; do not overwrite it with
the raw engine error.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Extrude started with the sketch still open ends the sketch on its way. With
"If a sketch ends: Return to the previous view", that end starts a camera
animation, and turn_for_extrude read the camera through settled_cam() - the
target of that animation - so the view saved as "before Extrude" was where the
sketch end was already turning, not where the command was clicked. The view is
now taken before the sketch is finished.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
The check that lets a key go only over HTTPS or to this computer ended the host part at `/` or
`?`, while the HTTP client also ends it at `#`, so the two could disagree about the host. It now
ends where the client ends it, and over plain HTTP the host part must be exactly this computer's
name with at most a valid port: no user name, backslash or stray character.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 597b23ba8 jyviko: Sheet metal: cuts and holes pass over sheets and bends by their exact boxes, never a mesh's
- 820b7b667 jyviko: Agents: AGENTS.md loses a stray merge-conflict marker line at its end
- 92734d7eb jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take 600 s again: under CI's parallel load they pass the 180 s default (develop 820b7b6)
- 653c16e6f jyviko: Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9914
Co-Authored-By: Claude <noreply@anthropic.com>
* test: Move/Copy copy of a picked component (#9914)
Tests for a component picked in Move/Copy with Create Copy: it is copied as an
independent component placed with the move, the original stays, one undo removes
the copy; a body picked with Create Copy stays a body copy; a component picked
without Create Copy moves its bodies as before.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy copies a picked component as a component (#9914)
With Create Copy ticked and the component pick mode on (or a Browser component
row), a picked component is copied as an independent component (Paste New,
component.paste_new) and the copy moves by the move's transform (occurrence.move
in the world). Bodies picked still copy as bodies; without Create Copy a component
still moves its bodies. The copy and the bodies are one undo step.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: solid.move copies of components reply like a move and roll back (#9914)
A copying move with components replies as a solid.move does: the bodies' feature reply,
with the copies listed in occurrences. The bodies are mapped to their frame before any
copy is made. The solid.move help documents occurrences. A copy that fails part way
changes nothing and leaves no undo step.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy takes a picked component whether or not Create Copy is ticked (#9914)
A component picked in the component pick mode, or a Browser component row, goes into
the Move bodies input as a component, so Create Copy can be ticked after picking it.
Without Create Copy the component still moves its bodies. Not while editing an
existing move. The Browser model tests read the bodies the command would move.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy preview draws a copied component where the copy lands (#9914)
The fast preview took the component's bodies from the listed occurrences as well as the
bodies, drawn moved by the move, so a component copy previews at the moved place
instead of the scratch design's unplaced states. Test: a component-only copy and a
mixed copy preview where the copy lands.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: a copying move refuses bodies that are not a list (#9914)
With components, a bodies value that is not a list was ignored; without components it
is refused. It is refused now, before anything is copied.
Co-Authored-By: Claude <noreply@anthropic.com>
* test: an edited move never takes a component pick, through the click (#9914)
Clicks the component in component pick mode while an existing move is edited: the pick
stays a body. Fails when the editing condition is dropped.
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: Move/Copy preview takes components only for a copy, and the mixed test can fail (#9914)
The engine refuses `occurrences` without `copy`, so the preview leaves
such params to the full preview too. The mixed-copy test now gives the
component a taller box, so its height shows the component was drawn.
Co-Authored-By: Claude <noreply@anthropic.com>
* docs: component_pick no longer needs Create Copy ticked (#9914)
Co-Authored-By: Claude <noreply@anthropic.com>
* test: a component picked with its parent is copied once (#9914)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9284
* Localization: Russian "Close draft" reads as a draft analysis (#9284)
The report form's "Close draft" button said «Закрыть анализ уклонов»
(close draft analysis). It closes the report draft: «Закрыть черновик»,
the word the Russian catalog already uses for this draft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ad3ee0585 jyviko: Agents: model decisions use exact geometry; a mesh is for display, export, previews and mesh bodies
- 608d07eca jyviko: xtask: mesh-decisions, model decisions use exact geometry; today's 176 mesh decision sites are listed and the list only shrinks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Hole: a hole moved off the material says it removes no material (#10701)
A hole whose position, parameter or sketch point moves it off the part
cut nothing and said nothing: the feature had no warning, and a
parameter sweep listed the value as fine. A hole whose tool is clear of
every body it cuts now warns "the hole removes no material" ("1 of 2
holes remove no material" for several), as a pattern does of its
copies. The check compares boxes only, from the meshes the hole already
found its face on, so a large hole pattern costs no extra booleans.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: a hole wider than the part says it removes all of it (#10702)
A through hole wider than the part removed the whole body with no
message, also when a parameter widened it later. The hole now warns
"the hole removes all of Body1" when a body it cuts is gone after the
cut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The card's area is as tall as it was the frame before, and the first
frame laid the body out shorter than it ends up, so the scroll area
stayed short and the Hatch row (and Flip, for a tilted plane) was cut
off. The card may now grow to the height it is allowed.
The offset is shown to the design's length decimals and a tilted normal
to three places, as the pill shows them.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10127
* Assemblies: a construction axis follows its component when the component rotates (#10127)
A construction axis or point built on a body now goes with that body when
Move/Copy moves or turns it. Each construction records the bodies its picks
lie on; the Move feature (not a copy) carries along every construction whose
bodies it all moved, with the same transform in the construction's component
frame. One that also reads something fixed stays where it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
sheet.fold refused any fold whose bend zone wasn't a rectangle. It now
crosses the sheet's own outer edges, slanted or on any curve: the outline
is cut exactly across the zone, the panels keep their real outlines, and
flanges and other folds still go on them. The flat pattern's DXF keeps the
curve as drawn. A sharp corner in the zone stays refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A permission question counted as one of SolidCraft's own tools when its title merely contained
"solidcraft". Now the whole title must be a tool of the chat's own MCP server, named as
`mcp__solidcraft-app__<tool>`, and its kind must be `other` or not given. Anything else goes through
the user's mode and remembered answers, or is asked in the panel.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10704
* Section Analysis: view.pick skips edges and vertices in the removed half
near_edges now applies the same section `kept` predicate the mouse picker
uses (viewport::pick, since #6722), so an agent picking through view.pick /
ui.pick no longer gets edges and corners the user cannot see.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A client could connect and send nothing, or only blank lines, and hold one of the 16 connection
seats for as long as it liked. All reads before the token now share one five-second deadline; the
connection is then closed without a reply. An authenticated connection may idle as before.
`solidcraft-cli mcp --connect` used to open a connection at start and hold it until the first tool
call. It now only checks that the app is there, and the first call connects.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On Windows the token file is restricted with `icacls`, which may not finish in time (#6145). That
counted as success everywhere, and is safe in the default folder, the user's own local app data.
A folder picked with SOLIDCRAFT_CONTROL_DIR may be readable by others, so there a timeout now
removes the still empty file and returns an error. The default folder behaves as before. The
decision is a small function of its own, tested without running icacls.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A design's lock file went through the same writer as the design, which follows a symbolic link
so a linked design is saved where it lives. The lock now has a writer of its own that refuses
anything at its path but a regular file and replaces only that name. Reading a lock takes only a
regular file and no more than a lock's size. Saving a design through a link works as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5136898b9 jyviko: Fillet: a setback too short for its corner is refused naming the least that builds (smlib_blend_fit_size)
- e6db7be0a jyviko: Kernel tests: three rounds of different radii at a corner meet in SMLib's setback corner
- 5d168a5e2 jyviko: Kernel tests: SMLib's own corner between curvature rounds is curvature continuous, as the G2 patch is
- 99953687c jyviko: Kernel rig: the boss root's and the hole rim's curvature rounds take the default timeout again (37 s and 34 s on the box under the rig's parallel load, tangency-labs/smlib#96)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Also points the links at tangency-labs/solidcraft. The old list asked for reports of file access outside the allowed folders, and for crashes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Selectable transcript labels do not request TextEdit focus, so the global
clipboard handler also copied, cut and pasted selected CAD geometry while
the user worked with chat text.
Keep keyboard ownership with the visible chat after a pointer press until
the next press outside it. Release it when the panel is hidden, and do not
use selections from other native viewports as a global CAD shortcut guard.
Cover real label selection, clipboard events, fallback key events, quick
select-all, hidden panels and deliberate return to the CAD viewport.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10689
Co-authored-by: Cursor <cursoragent@cursor.com>
* Edit Hole: seed the face where the hole is now (#10689)
Project the stored position onto the drilled face along the hole direction when opening the editor, matching evaluation, so OK works after a parameter moves the face.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aed047703 jyviko: Kernel rig: the pipe on a plate's curvature round meets the plate G2 and the pipe G3, 40307.8856312 (option B's order-2 jets, tangency-labs/solidcraft#10845)
- 17de3569f jyviko: SMLib: pin f916a8d (a round on a definition face is its definition; the G1 setback fill certified convex, setbacks too short refused naming the least; the G2 certificate halves a span no level can certify at once)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Holes and cuts: count the bodies a cut works on in the cost tests
A test helper, cut_work, adds a feature at the end of a design and reports
how many bodies its cut ran booleans on and which bodies it left exactly
as they were (same geometry, key and face names). A new test pins that a
cut still goes through the boolean where its tool touches a face, runs
along an edge, passes a hair beside a body or drills into a dome.
The sheet metal hole (#10226) and cosmetic thread (#10227) work reuse the
helper for their own shortcuts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Holes and cuts: leave bodies the tool cannot reach untouched without a full cut
A cut ran a whole boolean against every body of its component, and for a
body its tool does not reach that boolean only handed the body back: about
7 ms per body, so a hole in a design of 200 blocks took 1.3 s. Now a body
whose box lies clear of every tool's box is left as it is. Both boxes are
their meshes' grown past how far the exact faces can curve out from them,
the same test sheet metal cuts already use, so a tool that touches a body,
grazes it or drills into a dome still goes through the boolean. Bodies
shown in another frame, mesh bodies and Intersect (which removes the
bodies it misses) are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cosmetic tap markings: look for their cylinder only in nearby bodies
A tap marking (a Thread feature, or the marking of a tapped hole) looked
for the cylinder at its point in every body of the design, and each
search meshes the body afresh: with many bodies and many markings that
grew quadratically (200 markings on 200 cylinders: 33 s of a 33 s run).
A body is now passed over when its box, from the mesh it keeps and
grown past that mesh's deflection, lies farther from the point than the
search itself would look (a twentieth of the body's size, plus its own
mesh's deflection). The search finds no face there, so the marking and
everything else stay the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5388
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: rebuilding a projection keeps the sketch's own curves on its points (#5388)
When a projected face changed shape, update_link rebuilt the link with
drop_link_entities, whose remove_points also deleted every curve using a
projected point: a circle the user drew on a projected hole's centre vanished,
and the extrude on it lost its profile. Before the projected points go, the
sketch's own curves on them move to a free point at the same place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Selecting a plane in the view now draws the grid on it, so the plane a
sketch would use shows before the button is clicked. Deselecting returns
the grid to the ground.
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
A Cut To Object on a curved face ran the tool through the target and kept
the tool less the body, the piece at the start. From outside a curved wall
to its inside face that piece is the air before the wall: the cut took
nothing, or the tool lay in the curved face and the boolean failed on the
coincident faces.
Where the target's material ends at the picked face under the whole
profile (rays over the profile cross it once, material before, none
after), the tool now ends flat halfway across the gap beyond the face. It
takes what lies before the face and meets no face of the body. Otherwise
the trim is as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Save As: refuse a name that opens as another kind of file (#9745)
file.save and file.save_as wrote a design container under any name, so a
design saved as part.step was refused when opened again and part.stl opened
as a broken mesh. A name doc.open reads as a STEP/CAD exchange file, a mesh,
a 2D drawing, a point cloud or a SolidCraft drawing is now refused, pointing
to .sc and, for export formats, to file.export. Names that open again as the
design (.sc, legacy extensions, .json, anything else) save as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Save As: check the folder scope before the design name (#9745)
A path outside an agent's folders is refused for that first, whatever its
extension, as before; the design-name check runs after it in `write`. Fixes
solidcraft-mcp tests::tool_calls_stay_inside_the_agents_folders, which saves
`x.step` outside the agent's folders and expects the scope refusal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10673
Co-authored-by: Cursor <cursoragent@cursor.com>
* AppImage: point the taskbar at the installed icon PNG (#10673)
Install hicolor icons before writing the desktop entry, refresh the icon cache, and set Icon= to the absolute 256×256 path so Cinnamon and similar panels show the mark instead of a thin strip.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: 10331
* Assemblies: a second planar joint turns its part a half turn to meet (#10331)
A second planar joint between two boards that mates faces pointing the
same way needs the board turned a half turn on the first joint. The loop
solve starts exactly turned away, finds no way round, and left the new
joint as a conflict; Move then said the part has no movable joint axis.
A new loop-closing joint now tries its own angle, each angle on the
joint path between its two parts, or one of each, a half turn round, as
the first joint of a chain moves its part into place, and keeps the
first that closes the loop without a new conflict. Faces that can never
meet stay a conflict and nothing moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move test: give the blocked part faces that can never meet (#10331)
The blocked-Move test from #10509 used two boards whose second planar
joint mates two faces pointing the same way. That joint now closes its
loop with the board turned a half turn, so the scenario no longer
conflicts. Mate the yellow front against the red top instead, which no
turn on the first joint can bring together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10688
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Feature editor: Undo, Redo and the History bar cancel an open editor first (#10688)
Undo, Redo and History steps changed the design under an open feature
editor, whose OK and Cancel then refused it. They now cancel the editor
first, putting its marker back, as starting another tool already does.
While an editor is still opening they wait for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A relation given no values already started from where its parts sit
(relation_values), so the part moves no further than it must. A typed joint
(planar, revolute, cylindrical ...) added between parts another joint
already relates started its values at 0 instead, so the loop solver began
far from the current placement and could report a conflict for a joint that
agrees with how the parts are placed.
Seed every loop-closing joint, typed or relation, from the current
placement when no values are given. Joints in an open chain and joints with
explicit values keep their initial values as before.
* claim: #10316
* Insert Part: ASME/ANSI inch hex cap screws, hex nuts and SAE/USS washers (#10316)
Part of #10316. New standard-part families, tabled in inches as the
standards give them and built in millimetres: hex cap screw (ASME
B18.2.1) and hex nut (ASME B18.2.2), 1/4 to 1 in UNC and UNF from the
thread catalogue, and plain washers SAE and USS (ANSI B18.22.1 Type A).
Cap screws take the standard inch lengths, 1/2 to 8 in, defaulting to
the first at or above 2.5 d.
Lengths read as fractional inches in Insert Part, Change Part Size, part
names and part numbers. Insert Part gains a Unit system list (Metric,
Inch) above Type; it opens on Metric. parts.library reports each
family's system.
Inch parts get no cosmetic thread: solid.thread takes only metric
designations (#9571), and the old path would have made a wrong metric
mark. 9/16 waits for the thread catalogue; split lock washers and
carriage bolts follow in later PRs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The editor accepts revision changes that only changed what is shown,
counted by the display revision, but only hiding and showing counted
there. Section Analysis, the surface analyses, continuity, the
selection, the status pill catching up and view.render_select bumped
the revision alone, so turning a section off with an editor open made
OK refuse ("the design changed while the feature editor was open") and
Cancel leave the timeline rolled back. They now go through
refresh_display, as visibility changes do.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10852
* Circular pattern: the axis origin takes length expressions and follows them (#10852)
solid.pattern.circular with axis {origin, dir} kept its origin as plain
numbers, so a pattern about a parameter-driven point stayed where the
point was when the pattern was made: the seed moved with the parameter
and the copies did not. Expressions were refused (#248).
The pattern's origin is now a point of expressions, as a Mirror plane's
origin is: numbers or length expressions, evaluated on each rebuild, and
renamed with their parameters. Plain numbers are saved as numbers, as
before. timeline.edit sets pattern.origin as expressions, and editing the
pattern in its dialog keeps them. One pending format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9660
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Move bodies of differently turned components in the world together (#9660)
A Move feature moves each of its bodies in the body's own frame by one
vector and one turn. `solid.move` mapped the world vector and axis into
the frame of the first body listed only, so a body in a frame turned
otherwise (a part inserted with a non-default direction, moved together
with a block of the root) moved along its own axes.
When the bodies listed lie in frames that turn differently (or, for a
turn, also sit in different places), the move is now split into one
Move feature per frame, each with the vector and axis mapped into that
frame, in one undo step. Bodies sharing a frame still make one feature.
Fixes#9660
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
A surface extruded from a fit-point spline is one B-rep face per span,
joined by hidden seams; the viewport picks and highlights it as one face
(Mesh::surface_patch). sketch.intersection_curve turned a face pick into
the single nearest face, so the curve stopped at that span's ends.
project3d::mesh_of now returns the picked face's surface patch and
mesh_intersection keeps the triangles of every face in it. Body sources
and Project to Surface are unchanged.
* claim: #10306
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Language: a Chinese system tag goes by its script, then its region (#10306)
macOS lists its languages with a script (zh-Hant-TW), which no catalog
matches exactly, so the base zh (Simplified) was picked for a Traditional
Chinese system. Hong Kong and Macao tags got Simplified the same way.
A Chinese tag now picks zh-TW for the Hant script, zh for Hans, and
without a script zh-TW for the TW, HK and MO regions, zh otherwise.
Other languages keep the exact tag, then the base language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: sectiontilt
* Section Analysis: tilting the plane no longer rebuilds the outline index every frame (#10373)
The section outline cut through an index of slabs along one normal, rebuilt
whenever the normal changed: tilting a Section Analysis rebuilt it every
drag frame (about 0.15 s on a 2.5 million triangle part). The index is now a
grid of cells holding each triangle by where its box sits, with the box
around each cell's triangles, so it serves every normal. It finds the same
segments, in the same order and to the bit, as cutting every triangle.
The viewport keeps one index per shown body mesh, no longer per normal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`sheet.perforate` takes an optional `sketch` (and `profiles`): the field's
outline. Holes go only inside its closed profiles, out of their inner loops,
`margin` clear of its edges, on a grid from the outline's lower-left corner.
On a folded sheet the outline maps through each panel the sketch lies on and
is clipped to it, so it never reaches a flange in the flat; a sketch on no
face of the sheet is refused. A mirrored copy mirrors the outline, and an
edit that names no sketch (the Perforate dialog has no outline) keeps it.
Without a sketch the field covers the whole sheet as before.
The feature saves `sketch` and `profiles`, a sheet's perforation its outline
in flat coordinates: one pending format note, no migration.
Assisted-by: LLM
* claim: #8822
* Tangent Plane: line it up with a reference plane, at an angle (#8822)
`construct.plane.tangent` takes an optional `reference` (a plane or planar
face) and `angle`. On a cylinder, cone or torus the plane touches where the
face turns towards the reference, turned by the angle about the face's axis,
on the side of the pick; on a sphere it is parallel to the reference. The
plane follows the reference when it moves. The Tangent Plane dialog gets a
Reference plane input and, once one is picked, an Angle field; editing the
plane brings both back. Saved as a pending format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9074
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* OBJ export: welded as STL and 3MF are, so a curved body opens again closed (#9074)
The OBJ writer joined vertices only when their coordinates were equal bit
for bit, but each face of a curved body writes its edge points again a few
ulps apart, so neighbouring faces shared no vertices and the file reopened
as an open mesh with no volume.
It now welds each body as the STL and 3MF exports do (threemf::weld_tagged,
with the same tolerance), and every corner keeps its normal: the normal of
the original corner it came from, or for a point a side was split at, the
normal interpolated across the triangle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Ambient occlusion: the radius follows what the frame draws (#9327)
In an empty design the radius came from the model's box, which is empty, so a
preview got the smallest radius and the depth map's precision showed as specks.
It now comes from the box the depth range uses, and with nothing to draw there
is no occlusion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ambient occlusion: the term drawn once and blurred by depth (#9327)
The lit pass worked the term out for every fragment it shaded, under a pattern
that changed from pixel to pixel, which read as grain. The term now has its own
texture, drawn once for each pixel of the prepass, with a fixed 4 x 4 pattern, and
a 4 x 4 blur that keeps to each pixel's plane takes the pattern out without
crossing an edge. The lit pass reads the result. The prepass and the term share
their pipelines and draw walk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9373
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline folders: editing a feature in a folder leaves no stale id, and such designs open again (#9373)
timeline.redefine runs the edited feature's command on a scratch copy with the marker just after
the feature, and takes the new definition from the feature that run makes. Inside a timeline
folder that trial feature joined the folder too; it was removed from the feature list but not
from the folder, and its id, handed back, was the next feature's. Each edit left that id in the
folder (the same one, edit after edit), naming no feature or, once a later feature took it, a
feature twice, and the reader then refused the design: "damaged design: invalid feature in a
timeline folder". The trial feature now leaves the folders as it leaves the feature list.
The reader drops a folder entry naming a feature or joint the design doesn't have, or one a
folder already holds, and opens the design: folders only group the timeline, so nothing else is
lost. A folder damaged in itself is still refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Report focused keyboard ownership from the shared text editor, matching the other Preferences fields. Regress real Name-field typing, focus retention, unchanged search text, and saving the resulting profile.
A mirror of placed bodies follows its source, so each frame of a drag evaluated
it and made new copies with empty mesh cells. A reflection can't share its
source's triangles, so every copy was tessellated from nothing, and so was
anything an evaluated feature after the mirror made.
Keep the first copy of a body with its source: each later copy is a proper rigid
move of it, so a world state draws them from one set of triangles. The model
keeps each copy's own lazy mesh. A feature evaluated again that gives the same
solids (an import) keeps its meshes.
A mirror of placed bodies no longer searches its copies' revolved faces when no
later feature can build on bodies. That depends on the design alone and is part
of the mirror's placement digest.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Since #10183 the app follows the system's language, and the tests followed it too, so a test
naming an English word failed on a PC set to another language. CI's runners read as English
and never saw it. In tests the system's language is now English: `cfg!(test)` for this crate's
own tests, as the engine's folders do, and the harness for the tests outside it. The preference
stays `system`, and the app is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: 10368
* Web offline test: each copy of a real build gets a file of its own (#10368)
With --site, the six builds were copies of one real build that differed
only in index.html. The overlapping-downloads step holds back the files
the next build lacks, so nothing of v5 was held: its download finished
before v6 launched, v6's worker then retired and deleted it (correctly,
no page used it), and the step waited 240 s to see it complete.
Successive deployments differ in more file names than that (Trunk names
files after their contents). Each copy now gets own-<build>.txt, like
the stand-in's build-named script, so v5's own file is held as the step
intends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Typing a parameter's name now lists every parameter whose expression
uses it, and a value finds the parameter that holds it. The filter
still reads names, comments and groups, and a text parameter's text.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A straight line of another sketch, picked into the Project dialog, came
in as a named sketch curve, which the projection preselection did not
know: it refused with "select geometry or bodies that can be projected"
although the OK button was live. The same reference the external pick
stands for is now made for it, so the line projects (#10291).
Co-authored-by: vdirienzo <vdirienzo@users.noreply.github.com>
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* wip: the diagnosis of #10181 (the bug reproduces on current main)
sketch.project has .enabled(in_sketch) (crates/engine/src/cmd/sketch_project.rs:24)
and in_sketch (crates/engine/src/cmd/mod.rs:285) answers 'no sketch is being edited'.
Pressing P outside a sketch goes keymap::press -> sketch_tool_for
(crates/ui-egui/src/keymap.rs:451-457) -> app.start("sketch.create") with
d.then_start = Some("sketch.project"): the sketch IS created, but the Project
dialog opens and the command is refused, so the dialog shows the red row and the
'Create Issue...' button, which opens the Report a bug form over the viewport.
The probe here reproduces the bug on the CURRENT main (two variants). It is a
diagnostic probe, not the regression test: it must be replaced before a PR.
* test: a context error offers no Create Issue button (#10181)
The Project panel showed the red row for a CONTEXT error ('sketch.project is not
available right now: no sketch is being edited') and offered the 'Create Issue...'
button, which opens the Report a bug form over the viewport. A context error is
not something to report, so the panel must not offer it.
RED: the test fails with the exact message of the issue.
* fix: a context error is not something to report (#10181)
The Project panel offered "Create Issue..." for the error the engine
raises when the command is not available in the current context
("`sketch.project` is not available right now: no sketch is being
edited (Create Sketch or Edit Sketch first)"). That refusal is guidance
about the context, not a failure of the design, so there is nothing to
report: ending the sketch under an open Project panel should not invite
the user to file a bug.
error_rows already spared the missing-pick errors ("select ...", "pick
...") the same way. It now spares the context refusals too, using the
engine's own kind rather than the message text: CommandSpec gains
disabled_refusal, which is the engine's own Disabled refusal for the
command in the current session, and the UI matches the dialog's error
against it. A real failure of the command (an invalid face, say) still
shows the red row with "Create Issue...".
* style: rustfmt the test of #10181
The formatter joins the two asserts of the test onto one line (the
repository sets max_width = 150 and use_small_heuristics = Max). The
tokens of the file are unchanged: the diff is the line breaks of the
asserts and nothing else.
* Angle fields: a decimal point typed into an angle stays (#10582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Angle fields: a decimal point typed into an angle stays (#10582)
Edit Canvas applies its Angle box at each keystroke and keeps the angle
in radians, so the box gets back a hair off the value it set; egui's
DragValue takes that for a change made elsewhere and rewrites the text
being typed, dropping a decimal point just typed (-3.7 became -37).
angle_field now hands the DragValue the value it set while the value it
is given is within 1e-9 of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a4d9c31c jyviko: Known-failing: the shell of a fully rounded box opened at one face fails on SMLib 5e8c9c1 (tangency-labs/smlib#102)
- 303111e4e jyviko: Known-failing: the action matrix's oblique cylinder cut fillet passes on SMLib 5e8c9c1; two shells still fail
- c5332faf4 jyviko: Kernel rig: the boss root's curvature round gets the rig's 1800 s cap: on the CI runners, 8 cases at a time, its G2 certification passed 600 s (tangency-labs/smlib#96)
- 970446dec jyviko: Kernel rig: a case's continuity can ask for an order per seam (seams: [{order, edges, exact}])
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 72109054c jyviko: Kernel tests: the box-and-fillet wire fixture records the round's cylinder frame as SMLib now keeps it
- f87305648 jyviko: Known failing: two kernel tests' reasons as they fail on SMLib 5e8c9c1 (a partial selection running into an unblended tangent edge)
- 75efb8f0c jyviko: Kernel rig: two curvature rounds get 600 s, past the 180 s default, while G2 certification is slow (tangency-labs/smlib#96)
- 68c3ccb75 jyviko: Oracle: 34-chamfer-then-fillet and 35-fillet-curved-curved pass on SMLib 5e8c9c1 (their STEP edges are on their surfaces)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tangent Arc: a first click off a curve's end is refused at once, saying where to click (#10653)
The Tangent Arc tool took any first click as its start; a click on a
line between its ends snaps to a place that is no point yet (on:l3:...,
mid:l1), and the second click then failed with "unknown sketch point"
naming that internal reference.
The tool now refuses such a first click at once, with its own hint as
the error, asking the command's rule (tangent_arc_starts_at, factored
out of arc_tangent: the picked point or one at the same place, and a
drawn curve leaving it). The command refuses a snapped start with its
existing message that start must be the end point of a line or arc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Tests: the autosave scenario crashes once its autosave has landed (#10690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the autosave scenario crashes once its autosave has landed (#10690)
s25_autosave_recovery 'crashed' right after the extrude; under load the
autosave of it, written on a worker thread, had not landed, so the next
launch recovered the earlier autosave without the body (step 16).
The harness's crash restart now runs frames, bounded, until the active
autosave has caught up (Autosaver::caught_up: no write running and the
last autosave holds the design as it is). The app's own ticks still do
the writing, so an autosave that stopped writing still fails the test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9087
* Control channel: report the dialog as data, the open windows, and what ui.start opened (#9087)
`ui.inspect.dialog` (and `ui.editFeature`'s reply) was the dialog's Rust Debug text, which
changed with every refactor and couldn't be parsed. It is now an object: the dialog's command,
title, the feature an edit rebuilds, its selection inputs, its error, and the commands OK runs
(or what it waits for). `hover` in `ui.inspect` and `ui.selection` is a selection-like item
instead of Debug text.
`ui.inspect` gains `windows`: the tool windows open beside the model (Parameters, Bill of
Materials, Design Properties, Sketch Report, material card review) by the command that opens
each, and the Help menu's (About, Updates, Shortcuts, Crash Reports, Report, Messages) by their
`ui.help` item. Before, an agent couldn't tell these windows were open.
`ui.start` and `ui.editFeature` reply with what they opened (tool, dialog, windows), the status
line, and `pending` when the start waits for the history and opens on a later frame.
Scenario `dialog` checks match words of the dialog's state from the app directly, so the
scenario files are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10675
* agent chat: Copy message on each sent prompt and assistant text block (#10675)
A visible Copy message button on each copyable transcript message and a
right-click menu with the same action. Assistant replies copy their
original Markdown, prompts copy the text as entered; picture-only prompts
and thoughts get no action. Hover-only message areas keep partial text
selection working.
* agent chat: complete Copy message locales and tests (#10675)
* agent chat: route the message copy menu through ui_kit::Container (ui-containers gate)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Sketch: Remove Spline Point takes one fit point out of a spline (#10783)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Remove Spline Point takes one point out of a spline (#10783)
sketch.spline.remove_point takes one fit or control point out of a
spline. The spline keeps its id and runs through its other points, which
stay where they are. The point goes with the constraints on it, unless
another curve uses it. A closed spline's closing point, an end joined to
other geometry, the last 2 points (3 when closed), and projected, offset
or patterned splines are refused with a message.
The right-click menu of a spline point, picked alone, offers it beside
Reverse Spline Direction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10703
* Sketch: do not tie expression-placed points to the origin with an automatic Coincident
A point whose coordinates are parameter expressions follows those
expressions. When they came to 0 at draw time the point landed on the
origin and connect_points tied it there with a Coincident, exactly like
a snapped click; the next parameter change then conflicted with the tie.
connect_points now skips points that carry exprs; plain-number points
keep the snap.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Face names: one name on two bodies is no split face (#10699)
A hole placed on the top of one of two bodies an extrude made, or on a
piece of a split body, warned "face `F2:top` was split; using the piece
nearest the picked point": the face name is on both bodies, and any
name found more than once counted as split. A name on several bodies,
one face on each, now finds the face the point lies on without the
note; pieces on one body, or a point on none of them, still say split.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: look for a face name shared by two bodies on the body the point is on (#10699)
The lookup over every body counts a name on several bodies as split on
purpose (a copy's face is not a piece of the source's, see
`the_same_face_on_a_copy_is_not_a_piece_of_the_named_bodys_face`), so
the first change, which made it unique there, is undone. A hole whose
face name is found split while its point lies on one of those faces now
looks again on that body alone: one face of the name there is the face,
whole; pieces on that body still say split.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The residual of a length dimension is the magnitude of the distance between
the line's two ends. At zero the magnitude has no derivative, so the rank
analysis read the constraint as if it were not there and the sketch reported
a degree of freedom that was not there.
At zero the two ends of the line meet, so the residual says it with the
vector between them, the way a coincidence does. That is the treatment a
distance of zero already gets (upstream #4397); the length family was left
out of it.
Regression test: crates/sketch/src/tests.rs, zero_length_keeps_the_line_constrained.
Co-authored-by: Homero Thompson <homero@local>
* claim: #8266
* Computing toast: a Cancel that gives up on the move (#8266)
The Computing toast for a history command (marker move, undo, redo,
suppress, reorder) or a delete's check computing off the window thread now
has a Cancel button. It drops the job and the commands queued behind it;
the design stays as it was, since a deferred command only runs for real
once its evaluation is in. A feature edit applying keeps its dialog's own
Cancel, so its toast shows none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10620
* widen dialog form-card label columns to the measured label width (#10620)
* fix compile of the grow tests
* grow the card only past the label cap and tag the form scope in place (#10620)
* keep scope_grow crate-internal so the gallery scan stays element-only (#10620)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #10510
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Sketch: dragging a centre rectangle's constrained centre point keeps the rectangle's size
A centre rectangle's centre sits on the middle of its diagonal, and a
press there picked the diagonal's midpoint before the centre point. The
drag then took the diagonal by its middle: with the centre free the
rectangle moved along, but with the centre held (on the origin, on a
line) the diagonal turned and stretched about it, and the rectangle
grew or shrank with the pointer, many times its size.
A drag that starts on a line's middle where a point is held by a
Midpoint constraint now drags that point, as a drag that starts on the
point does. A centre held on the origin stays there and the rectangle
keeps its size; a centre on a line slides the whole rectangle along it;
a free centre still moves the rectangle. Clicking the middle still
selects the line's midpoint for constraints.
Fixes#10510
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
With a section on, Slice in the Sketch Palette lit up but the model was
still cut only by the section: the viewport took the sketch's plane only
when there was no section. Slice now takes it whenever it is on in the
sketch being edited; the section comes back when Slice is turned off or
the sketch closes. A slice is hatched as it is without a section.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5cd5f303 jyviko: Known failing: two 851 chains whose corner piece is a ball of tube-centre radius 0
- ea49dff48 jyviko: Ladder: 016 and 018 refused, their r3 chain takes the vertical edge; 020 and 021 recorded
- 38385ab5d jyviko: Kernel tests: three rounds at a box corner end on one rational patch on the ball's sphere, not an analytic sphere
- 459937e52 jyviko: Kernel rig: the curvature round on a pipe on a plate is listed: a seam grades G3 where exactly G2 is wanted
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #10874
Co-authored-by: Cursor <cursoragent@cursor.com>
* Insert drawing: name the sketch size cap when a file is too dense (#10874)
A large SVG/DXF failed with opaque \"sketch is too large\". Say the 20000 point/curve limit and that scale alone does not reduce entity count, and refuse dense drawings before adding them.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
`face_of` called `Body::faces`, which tessellates the whole body, on every
solve. Face origins went through the cached `ModelBody::joint_faces`, at
the same tolerance, but edge origins never did, so one edge origin on a
large body cost a drag or a Drive Joints step far more than the solve.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9874
* Add shared Preferences cards, figure painters and gallery entries to ui_kit
* Preferences: Arabic, Hebrew and Vietnamese carousel labels
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Use the app's selection colours in the Preferences cards
* Measure Preferences figure inks and use shared palette metrics
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A corner dialog copied the preview's error into its own, where nothing
cleared it when the preview recovered. The dialog already shows the
preview's error, so the copy is gone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: io's byte mutator moves to a testkit crate, a dev-dependency only (no behaviour change)
`solidcraft-testkit` (the Testkit class xtask/src/layers.rs reserves) holds the mutator and the
no-panic check unchanged: the same seeds, mutations, budget and doc comment. io's reader fuzz
tests use it as a dev-dependency and give the same case counts; the mutator's own test moves
with it. The co-editing wire's decoders will fuzz with it too (#5184, CE6).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cargo.lock: testkit at the workspace version
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A pull request outside crates/kernel, crates/geom and vendor/truck* is no longer labelled for a
kernel word in its title. Issues and discussions keep the title check.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7481
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Coil: step arrows on the Revolutions field (#7481)
The Coil dialog drew Revolutions as a plain expression row, the one
count without the step arrows the pattern quantities have. It is now a
count row from 1 to 200 turns (the helix's limit); a fraction still
types in, and an arrow steps it to the next whole turn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A chamfer's warning quoted the full generated names of fourteen split edges,
122,701 characters (#8541). Names over about 80 characters are now quoted by
their first 48 and last 24 characters.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Offset Plane and a cosmetic Thread have no live preview, so their edits' OK ran on the window
thread and recomputed every later feature there. Any edit now goes through the off-thread
transaction. The editor's pinned original is used only while the dialog previews, as
open_feature_edit keeps it: a Thread switched from Modeled to cosmetic edits the design as it is,
so a body hidden meanwhile doesn't refuse it as a changed design.
* claim: #4986
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Press Pull on a chamfer's face changes the chamfer's distance (#4986)
A chamfer's face is flat, so solid.press_pull and the Press Pull start
path in the UI took it for a planar face and extruded it. Both now look
for a fillet's or chamfer's face before asking whether the face is
planar, so a chamfer's face reopens the chamfer and its distance grows
by the distance pulled, as a fillet's radius already does. A first pick
with Press Pull already open is routed the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Press Pull on a blend face puts the arrow on the edge clicked
A fillet or chamfer reopened by Press Pull from one of its faces drew
its radius or distance arrow on the feature's first stored edge, which
can be a corner the user did not click and cannot see (the Sample
Plate's fillet, from the far corner). The click's point now goes with
the reopened dialog as a hint that is never saved, and the arrow sits
on the feature's edge nearest it, at the point on that edge nearest the
click. Opened any other way (the history, Edit Feature) the arrow stays
on the first edge as before.
A click point that is not finite is not kept, and a point on a flat face next to a chamfer still extrudes that face (tested).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The live preview of extruding a picked face built its walls from the
face's display triangles and drew a line up the wall at every boundary
point, each wall piece shaded flat. A round face (the Bolted Flange's
flange) looked like a polygon while extruding. Lines now go up only
where an edge of the face ends and the outline turns there more than
its curves do, and a wall's normal turns with it between smooth pieces.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Colour popover: a held step button keeps stepping, and R, G and B have tooltips (#10201)
The step buttons beside each colour number sensed clicks only. egui
stops counting a press as a possible click once it outlasts its longest
click (0.8 s), so the held button stopped repeating after 8 steps. They
now sense drags too, which keeps a long press down on the button until
it is let go.
R, G and B now carry tooltips (Red, Green, Blue) as H, S and V already
did: a single letter doesn't name the colour in every language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Colour popover: the R, G and B tooltips in Vietnamese too, a complete catalog (#10201)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: reference Distance shows the document precision (#10693)
A measured reference distance showed the raw float (10.000000868569572 mm).
The field now reads at the document's length precision while Refs keeps the
measured value for the model, so OK still sends what was measured.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* Hole: restored literals use the document precision (#10693)
Round every literal reference distance on Edit Feature, including comma
decimals and exact whole values; expressions stay as written.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* ui_kit: search_picker, a filtered dropdown with a custom entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: endpoints list their models with names, say when listing fails, and OpenClaw and OpenRouter presets (#2582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: a typed model goes to endpoints and to agents that offer a model option
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the header's model pickers search and take a custom model
The popup can't grow once it is open, so search_picker now fixes the height of what changes below
its box when it opens: the custom row or a late list could otherwise end up out of reach.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* AI preferences: pick an endpoint's model when adding it and on its card (#2582)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: model picker rows read from the left, and a refused typed model says which
From running it: list_picker centres its text, which reads badly for a long list of ids, and an
agent's own refusal can say no more than "Internal error". The search box also asks for a repaint
while it waits for the focus, so an idle window does not stop short of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: docs for the model picker
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: an endpoint's answer that is no model list says so, an empty list too, and editing lists with the kept key
A 200 without a `data` array (a web page where the endpoint should be, as OpenClaw's gateway
serves until its chat endpoint is enabled) was cached as a successful, empty listing, so the
picker stayed blank with nothing to say and never asked again. Now it is an error with its own
note, an empty list says so, and both are asked for again the next time.
The Edit dialog lists its endpoint's models when it opens, with the kept key read from the
keychain on the listing's thread, as the card does; the key stays out of the field.
The method-not-found test expects the refusal notice that names the model, as every refused
model gets since this branch.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: models from several providers fold under their providers inside the picker
As Chemiseblanc does in #10187: with two or more groups, `search_picker` draws each group as a
header with a chevron, the name and how many of its choices are listed, and a click folds or opens
it. Before anything is typed only the current value's group (and the one the caller asks for) is
open; a group with a match opens once something is typed; a fold made by hand stays until the popup
closes. Enter takes the first row shown, so never one folded away. A lone group keeps its plain
heading.
The header's model picker feeds its providers in as groups, so the separate provider drop-down
goes; the control channel's `provider` now says which group opens first. A header click gives the
focus back to the search box, so typing goes on filtering.
The dialog's listing test checks what kind of listing it got rather than translated words, which
the listing thread may render in another language than the test's.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: rustfmt the provider groups
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Agent chat: an endpoint's models named `Vendor: Model` fold under their vendors
OpenRouter lists `openai/gpt-6.1-terra` as "OpenAI: GPT-6.1 Terra". A listing whose ids read
`vendor/model` and whose names read `Vendor: Model` now names its providers, so the picker folds
it under its vendors like a multi-provider agent; the rows read the model's name, and the id stays
in the tooltip and in the search. An agent's own `Provider: …` word still comes first. One vendor
is one flat list, as before.
The Add dialog's picker has no current model to prefer, so with nothing to prefer every group
starts open; folding is a click away.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce8b01fa3 jyviko: Kernel rig: the partial-selection cases kept as -partial-chain copies, tangent chain off
- 78ed75162 jyviko: Kernel rig: the concave arc between the block's tangent sides kept with tangent chain off
- ee3ed66a4 jyviko: Kernel rig: two chains that now build graded by their exact volumes
- f2ff6f0d4 jyviko: Kernel rig: a curvature chain round a round's end refused for its size; the concave half circle builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
- snap_tangent_arcs : chaque extrémité d'arc prend la ligne la plus proche
- une ligne ne prend qu'une extrémité d'un arc ; l'autre passe à sa ligne suivante
- une ligne plus loin sur le contour est ignorée quand l'extrémité touche déjà une autre pièce
- tests : 4 unitaires (project_order.rs) et the_silhouette_of_conic_rounds_closes
Co-authored-by: P'tite Tête <asso@ptitetete.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf51e62f7 jyviko: Kernel tests: a law's dip shows its corner ball's sphere, a peak's two rounds cross (the reasons had them swapped)
- cde8be4a1 jyviko: Reference tests: the variable rounds 77, 78, 80 and 81 expect the union of their balls
- 155f1f470 jyviko: Known failing: the law corners' kernel and crate tests and rig 1207 pass on SMLib 48ea616
- 21f00a917 jyviko: Kernel rig: every fillet and chamfer case rounds its tangent chain
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e8caa1e91 jyviko: Tests: three rounds of different radii at a corner listed: the corner's transition kinks with the balls' touch circles
- 60393a718 jyviko: Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
- 6ba069d06 jyviko: Reference tests: the variable rounds 77, 78 and 81 pass on SMLib d01d7b0; their known-failure marks come off
- e24eb7789 jyviko: SMLib: pin 5e8c9c1 (the new blend's corners: Ball and End/Join; exact fold and room checks with fit sizes; overflow in place; the round as its definition)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #1486
* Compare picture: overlap and edge offsets of the model against a reference picture (#1486)
inspect.compare_picture lays the model's silhouette over the part found in a
PNG or JPEG and slides it to the best overlap: overlap (0..1), the model's
edges against the picture's in mm at nine stations, and an overlay PNG. The
MCP tool compare_picture runs it and hands the overlay back as an image block.
inspect.silhouette grows a reusable silhouette::outline for the model side.
* chore: re-trigger checks (defaults line already present in PR body)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: carry the Compare Picture label in Arabic, Hebrew and Vietnamese too
The complete-catalog guard (every_complete_catalog_carries_every_english_message)
failed because the pending file covered only en/ja/zh; ar, he and vi are
complete catalogs and need the key as well.
* Compare picture: one uniform scale, capped fit, sturdier part finding
Review on #6416: fit no longer stretches the axes apart (width is the default,
both scales uniformly by width and reports aspect_mismatch); the fitted model
takes the same MAX_GRID cap as the picture; the border flood seeds only from
border pixels near the border's main colour, reads alpha, retries at a
stricter step, and says which case failed; the slide searches the whole
placement range instead of a tenth around the centre; the model's holes get
the picture's fill rule; crop becomes crop_px / crop_fraction with explicit
units. Pins #1486's bracket (overlap 0.865, bottom -10 mm at the upright) and
adds a regression test per problem.
* Compare picture: alpha only for a see-through border, part_fills_crop, outline-only wording
Review re-test on #6416: one translucent backdrop pixel no longer switches the read to
alpha — alpha decides only when most of the border is see-through, and any ink is then
part, so a part drawn at alpha 100 survives; part_fills_crop: true takes the crop box as
the part itself, for one view cropped tight off a board where the part takes most of the
border and the flood would keep the backdrop strip instead; a third backdrop pass compares
each pixel to the border's main colour, so a white part on (245, 245, 245) JPEG at quality
75 separates; the command, tool and docs descriptions now say the compare is outline only:
holes are not compared. A banded light backdrop stays a follow-up. A test per case.
* MCP compare: format the picture tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Render results: keep up to eight completed renders and select or discard them
* Render results: Live and render compare with a divider, and render all shots
* fix: use comparison theme tint and reveal reset test targets
* fix: restore Unicode expectations in render workspace tests
* claim: #6528
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lost GPU: the per-frame probe opens a command list, as the upload would (#6528)
On a reset D3D12 device the empty submission before a frame's uploads
went through (it only signals a fence), and the first queue write then
panicked inside wgpu-core (PendingWrites::activate unwrapping Lost).
The probe now submits a command buffer with a debug marker: finishing it
makes the same begin_encoding call, through a path where wgpu loses the
device and runs its lost callback instead of panicking. The picture
capturer's probe does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7159
* Measure: a fillet's torus or a sphere reports its radius (#7159)
The face of a fillet round a circular edge is a torus and a ball's face a sphere, which
Measure listed by area only. Their face item now carries radius, diameter and surface
(and the ring radius of a torus); they stay out of Shape, so distances are unchanged.
Fixes#7159.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #9111
* Preview: new surface is tinted whatever its size, and the tints can be turned off (#9111)
A preview decided which faces of a changed body were new surface by asking
whether their triangle centroids lay on the old body, within a tolerance that
follows the part's size. A round or chamfer small beside the part never leaves
that tolerance, so it was drawn as if it had always been there, and sampling at
a fixed step told alike faces apart by nothing but how many triangles they had.
The kernel already records which faces an operation generated, so `build` takes
that record alongside the geometric test. The test stays because a body carries
the history of whatever last made it, which is not the previewed operation when
a parameter change re-evaluates the design: the record only ever adds faces to
the answer. The vote itself now asks about every centroid of a small face,
spreads a large face's samples without a resonant step, and calls a face new
above an eighth of its samples, which a blend tangent on both of its sides
reaches with the one row of facets in five that is clearly off the old surface.
Graphics gains two settings, both on as they come, so nothing changes out of
the box: Tint new surface in a preview draws a changed body as itself when it
is off, working out no face at all, and Show removed material in red leaves the
see-through cut and the ghost of the shape a feature replaces fully
transparent, drawing only their outlines.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* claim: #9084
* Edit Extrude: close on the first Escape (#9084)
An edit dialog whose value names a parameter (`T` in Edit Extrude) opened with
that field focused and its completion list showing the longer names (`tan(`),
unarmed. The list took the first Escape, so the dialog needed two.
An unarmed list now leaves Escape to the window until the box is typed in, as
it already leaves Enter and Tab; once typed in, Escape dismisses the list first
as before. Its hint drops "Esc dismiss" in that state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9827
* Sketch Offset: an Instances count stacks offsets one behind another (#9827)
Offset made one offset at a time, so a set of evenly spaced outlines meant
running it again on the curves it had just made, once per ring: a separate undo
step and a separate driving dimension each time.
`sketch.offset` now takes `instances`, a whole number or a unitless expression
from 1 to 100 (1, today's behaviour, by default). The per-group work the command
did inline becomes `offset_rung`, and `offset_ladder` runs it once per instance,
each rung offsetting the one before it the same distance again, so instance n
stands n distances from the curves picked. Every rung of a side is driven by
that side's own dimension, so editing it moves the whole set and keeps the
spacing even, and each side of a Two Sides or Symmetric offset grows its own
ladder. A rung the shape has no room for refuses the whole command and names
which instance it was.
A later rung reads its side from the geometry, through the rung's own
normal-distance annotation, rather than from the distance's sign: an output's
stored ends need not run the way the chain through them is walked, and a
reversed walk reads the same sign as the other side. A circle is the exception
and keeps the sign, because it offsets concentrically with no chain to walk, and
a step past a ring smaller than the distance lands beyond the centre, where the
circle's "outside the current radius" side test reads as the outward side: an
inward ladder turned round and grew again (1, 4, 1, 4 mm) instead of running out
of room.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Sketch Offset: the Instances row in the offset window (#9827)
The offset window gets an Instances row under Distance: a whole number with step
arrows, 1 by default, so the count can be walked up a ring at a time and the
preview follows each step. The count is not kept in the design, as Mirror's and
Scale's values are not, so the window sends the number it evaluates to rather
than the text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* UI kit: a count's step arrows are not text (#9827)
The arrows stand inside the editor, which asks for the text cursor across its
whole rect, so hovering one showed an I-beam and the arrows read as part of the
number. They take the ordinary cursor back after it, and the pointer is read
from the arrow's rect rather than from the hover the editor underneath competes
for, which keeps the hover highlight in step with it.
The pattern Quantity rows share this field and had the same thing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Sketch Offset: Instances label in the complete catalogs and the other shipped languages
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Offset Instances: translations for the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9873
* Add the Preferences design reference: pages, figures, measurements, tokens
* Fix the selection look in the design reference to match the app
File › Export STEP…, STL…, 3MF…, OBJ… and URDF… were UI actions around
the shared file.export, so Keyboard Shortcuts had no row for them.
file.export_step, _stl, _3mf, _obj and _urdf now do what those items do
when started from a key, command search or the menu (a save picker; Save
As Mesh for STL and 3MF), and take a path when called with JSON. The File
menu shows their keys. Each has a contract and a reply type
(schema/file.rs).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10600
* Sketch: a value box must not swallow a click that lands on a sketch point (#10600)
The construction line tools' Length box waits beside the pointer. When the
pointer reaches the reference line's own endpoint it can land under that box
(the box is anchored to the tool hover, which freezes while the pointer rests
on the box), and the box's text edit takes the click, so the tool never sees
it. A release over the tool's own value box or construction/normal switch that
lands on a snapped sketch point now goes to the tool; a click on the box away
from any sketch point still edits the box.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: Assemblies: use lookup maps when building the world state
* Assemblies: use lookup maps when building the world state
world_state_reusing, made again after every geometry command in a design
with components, filtered all bodies for every placement, searched the
timeline for every sketch and construction of a placed part, and searched
all bodies twice per tap and placement. It now builds the feature to
component map, the bodies of each component (in body order) and each
tap's component and body offset once per call. The result and its order
are unchanged.
On a 100-part assembly placed 5 times (800 sketches, 200 taps) one world
state drops from 124 ms to 9.5 ms (release, median).
A test-only counter of searches through all features or all bodies
checks that the work no longer grows with the sketches and taps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A join, cut or intersect without explicit targets reads where every body
of its component is placed. Its placement digest searched the model for
each of those bodies by name, then the timeline for its component and the
placements for that component's frame: O(B^2 + B*F) per feature, on every
evaluation, also when every feature comes from the cache.
The bodies, their components (Document::model_body_components) and each
component's frame are now looked up once per digest. The bodies are still
hashed in name order with the same values, so every digest stays the same
bit for bit and saved caches stay valid.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10393
* Per-component History hiding: flag, commands, Browser menu, bar toggle (#10393)
* Carry the new History-hiding strings in the complete catalogs (#10393)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Sketch: a construction line with a length can be a normal line (#10258)
`construction: false` on a construction line command that has a
`length` makes the segment a normal sketch line, ready to close a
profile, instead of construction geometry. The default stays
construction, and an infinite line is always construction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a length box in the construction line tools (#10258)
The horizontal, vertical, parallel and perpendicular construction line
tools show a Length box beside the pointer from the start. It stays
empty (shown as infinite) and leaves the keyboard to the tool's
shortcuts until a digit is typed; then the box takes the keyboard.
Without a length the tools work as before: one click, an infinite line.
With a length the first click sets the start and a second click the side
the segment runs to, sent as the command's `length` and `near`, so the
segment gets its length dimension. The angle tool has a Length box
beside its Angle box. A typed length keeps the start's snap, and the
preview draws the segment the click will create.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a construction/normal switch in the construction line tools (#10258)
A Construction | Normal switch sits under the Length box of the
construction line tools. Normal sends `construction: false`, so a
segment with a length becomes a normal sketch line, ready to close a
profile, without converting it afterwards. The switch starts at
Construction with each start of a tool. An infinite line is always
construction, so without a length the switch is greyed out and its
tooltip says why. It belongs to the tool alone: the Sketch Palette's
drawing line type (X) is left as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch drag: drop the second document copy per frame
* Sketch drag: drop the second document copy per frame
edit_solved copied the document to edit it, then stored it with
`*s.doc_mut() = doc`. The command's undo snapshot still holds the old
document, so doc_mut copied the whole design a second time only to
overwrite it. Store the edited document with Session::set_doc instead,
which forgets the same caches and puts it in a new Arc. The design lands
at a new address as before and the command's end records it for the
crash journal (#7502).
A live drag frame on a design of 200 sketches (20k curves) drops from
19.2 ms to 9.4 ms; 50 sketches: 2.3 ms to 1.7 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Move: say a part's joint conflicts instead of 'no movable joint axis'
* Move: say a part's joint conflicts instead of 'no movable joint axis'
When a joint of the selected part conflicts with the others (the solver
can't close its loop), Move found no axis and said "This part has no
movable joint axis.", pointing at joint types and limits. It now names
the conflicting joint and suggests editing, suppressing or deleting it.
Parts with no free joint value and no conflict keep the old message.
Refs #10331
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10484
* Sketch: Intersect can pick sketch lines and model edges (#10484)
The Intersect dialog only took faces or whole bodies, so a click on a
line of another sketch (the sides of a rectangle crossed by a plane
through its middle) picked nothing, although sketch.intersect already
cuts edges and sketch curves with the sketch plane. The pick list now
takes faces, edges and other sketches' curves, and the selection filter
reads Geometry | Bodies like Project's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10471
* Show given names in bidi display order; find RTL prefs labels typed in reading order (#10471)
crate::bidi ran over catalog text only, so a multi-word Hebrew or Arabic
body name showed its words left to right in stored order, and Preferences
search compared display-order labels against reading-order queries.
given_name now returns right-to-left names in display order (browser rows,
tabs, status bar all draw names through it), and text_matches also scores
the query after the same bidi transform.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Configuration rules: Then says it lists only the table's columns, and how to add one (#10532)
A rule drives or restricts a column of the table only, so Then leaves out a
feature without a Suppress column or a parameter without a column, where
When lists them all. A note under the list now says so and points at Add
Column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration rules: the two notes in the complete catalogs (Arabic, Hebrew, Japanese, Vietnamese, Chinese)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: View: work out consumed sketches and hidden bodies once per revision
* View: work out the sketches features use once per design
Each sketch_shown call walked every feature of the design to tell whether
the sketch is used, and the viewport asks about every sketch several
times a frame. The used sketches are now gathered into a set once per
design (keyed on the design itself, so any edit reads them again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* View: look hidden bodies up in a set
body_visible walked the hidden-bodies list for every body asked about, and
the viewport asks about every body several times a frame. The hidden
bodies now join the hidden joints and folders in the view's visibility
index, built when the list changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: View: work out consumed sketches and hidden bodies once per revision
* View: work out the sketches features use once per design
Each sketch_shown call walked every feature of the design to tell whether
the sketch is used, and the viewport asks about every sketch several
times a frame. The used sketches are now gathered into a set once per
design (keyed on the design itself, so any edit reads them again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Canvas: store reference image data as shared text so edits stop copying it
* Canvas: store reference image data as shared text so edits stop copying it
Every edit clones the document, because the undo history still holds the
old one, and the canvas image was a plain String: each of the up to 200
undo states owned its own copy of the base64 text. Canvas::data is now
Arc<str>, like the shared STEP text, meshes and point clouds; serde's rc
feature writes it as the same JSON string, so design files stay byte for
byte the same.
A 4.2 MB image with 250 edits: peak memory 1.09 GiB -> 42 MB, run time
1.16 s -> 0.12 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: a folder that holds only a new group shows it (#10526)
New Group from the root's context menu made an empty group in the Bodies
folder, but the Browser draws no folder without items, so in a design
with no bodies yet nothing appeared. A folder that holds groups is now
drawn with them, even before anything is in it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: test that a new group in an empty folder shows and takes a dragged body (#10526)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Extrude dialog: work out the automatic operation once, not every frame
* Extrude dialog: work out the automatic operation once, not every frame
An open Extrude window with the automatic operation on asked the engine
for `auto_operation` every frame. That probes the bodies with
`Mesh::contains`, rays through every triangle, so a large part cost tens
of milliseconds per frame with nothing changing.
The window now keeps the answer with a key over what it depends on: the
extrude's parameters (participants included), the design's revision and
id, and the active component and occurrence path. The latch still runs
every frame as before.
Open Extrude over a 1M-triangle mesh body: 29.8 -> 0.87 ms per frame
(headless harness, median of 3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Extrude dialog: keep the taper limits while the profile is unchanged
* Extrude dialog: keep the taper limits while the profile is unchanged
The taper handle is drawn every frame while the extrude window is open,
and every frame it worked out the inradius of each picked profile and of
each of its holes: a grid search over every side, about 200 ms a frame
for a plate with 64 round holes. Only the height changes between frames.
The radii are now kept in the window's state with the profiles they were
worked out for, and worked out again only when the profiles differ. The
limits come from the same arithmetic, so they are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10016
* Sketch: a Line chain survives Undo (#10016)
Undo could take away the segment the chain was drawing on from, and every
further click was then refused with "unknown sketch point". The chain now
remembers where each segment started and goes back to the last one still there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Raytracer: map faces to looks once
* Raytracer: map faces to looks once per body
Preparing a body for the CPU raytracer walked the body's face look list
one entry per work step for every triangle, so a body cost T x (F + 1)
steps (each through the job host) instead of T. The face looks are now
sorted once per body, keeping the first entry per face as before, and
each triangle finds its look with one binary search. Pixels are
unchanged; with 10 000 faces and 50 to 500 face looks, preparation
drops by 40 to 88 %.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Opening: validate the document once when a model cache is present
* Opening: validate the document once when a model cache is present
Opening a design that keeps its model parsed and validated document.json
twice: reading the model cache checked it before decoding the cached
bodies, and read_document, which follows straight after, runs the same
migrations and validation and fails the open when they fail. The open
path now reads the model without that check; geometry(),
read_design_geometry and the preview keep it. A broken document fails the
open with the same error as before.
3,000-feature design with its model cache, bench-open parse step:
426 -> 293 ms (median of 8, heavy machine load). Saving the opened
design gives a byte-identical file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10483
* ViewCube: an option to invert the curved roll arrows (#10483)
A new Navigation preference, "Invert the curved roll arrows"
(invert_curved_roll_arrows, off by default): with it on, the two curved
arrows at the cube's corner roll the view the other way within the
screen plane - the clockwise arrow rolls counterclockwise and the
counterclockwise arrow rolls clockwise. The sibling of the cardinal-arrow
inversion from #10286, which left these arrows alone.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: Mesh imports: compare by pointer before comparing contents
* Mesh imports: compare by pointer before comparing contents
MeshData derived PartialEq, so the dirty check and the autosave check
walked every coordinate and index of a scanned mesh after each edit,
although the document and its saved copy share the same arrays. Compare
shared arrays by pointer first and value by value otherwise, as Points
and Colors already do. About 1.9 ms per comparison for a mesh of one
million triangles goes to nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch: use a lookup map for curves in pattern upkeep
* Sketch: use a lookup map for curves in pattern upkeep
Pattern upkeep runs before every solve, each drag frame included, and
looked up every copy curve and its arc points with a linear search over
all ids. Dragging another line in a sketch with a 500-copy slot pattern
spent about two thirds of each frame there. The ids now resolve through
maps built once per call; the result is the same to the bit.
The solve bench gains a circular slot pattern section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hash sets for the stale-pattern check before each solve
The check whether a pattern lost a seed, copy or relation built three
ordered sets of all ids before every solve. Only membership is asked, so
hash sets give the same answer; a drag frame in a sketch with a 500-copy
pattern takes another third less.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Sketch: use a lookup map for curves in pattern upkeep
* Sketch: use a lookup map for curves in pattern upkeep
Pattern upkeep runs before every solve, each drag frame included, and
looked up every copy curve and its arc points with a linear search over
all ids. Dragging another line in a sketch with a 500-copy slot pattern
spent about two thirds of each frame there. The ids now resolve through
maps built once per call; the result is the same to the bit.
The solve bench gains a circular slot pattern section.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Projecting a whole body fitted its outline from mesh edges: a round wall seen
edge-on has triangles leaning a hair either way, so the outline zig-zagged
between both rims and broke into two-point pieces (lines), and seams where two
faces' triangles don't share vertices counted as open, outline edges. Faces
that face one way all over (planes, cylinders and cones about the sketch
normal) now decide for all their triangles, near vertices are welded, and a
seam between two faces facing the sketch is no outline. A STEP hook went from
159 lines to 10 lines and arcs.
A single rounded or chamfered rim of a cut curved face is a spline that only
follows its circle; read as Bezier pieces it came in as twenty splines. An
edge read as spline pieces that stays on a circle within 1e-5 of its radius,
in a plane parallel to the sketch, now comes in as that arc.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: datum planes, axes and points, at exact distances
The Measure tool took faces, edges, vertices and sketch geometry; a datum
plane or axis could not be picked into it, and a point set of an infinite
plane or axis would measure the wrong thing anyway.
Describe origin and construction planes, construction axes and construction
points as items, accept PLANES, AXES and CONSTRUCTION_POINTS (and the origin)
in the Measure dialog, and give the new shapes exact closest points:
- a point and a plane: the perpendicular distance;
- a point and a line: the perpendicular distance;
- two planes: parallel distance, or zero where they meet;
- a plane and a line: zero where they cross;
- two lines: the skew distance.
The panel and the quick readout show a plane's point and normal, and an
axis's point and direction.
Test: a point 10 above the XY plane, 5 from the Z axis, and a plane and an
axis that meet.
* Select: a straight sketch line is a curve in an input that takes curves
Adding axes to Measure's input made a straight sketch line match the "axis"
rule before the sketch-line rule, so a picked external sketch curve became a
SketchCurve instead of the ExternalSketchCurve Measure records. The axis rule
now applies only to inputs that take axes on their own (Move's direction and
the like), not to inputs that also take curves.
Test: measure_input_fits_external_sketch_geometry, and the Move axis picks.
* rustfmt: format the new selection filter and measure code
* Measure: drop an unused normalisation in the skew-line distance
---------
Co-authored-by: clarkliu <277482660@qq.com>
* Frames: test that a renamed cut-off piece keeps its name in a rebuild from the features alone (#10438)
solidcraft-cli eval rebuilds a saved design without its saved model; the
rename made after a cut then lands on the first line's member. The test
reproduces it on main; the fix follows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: a renamed cut-off piece keeps its name when the design is rebuilt from its features (#10438)
Since #10132 a cut's pieces past the first belong to the cut and the piece
that keeps the body's name to the body's own feature. Ordering the pieces
by their faces then moved the names among them but left each body's
feature behind, so the cut-off piece said the frame member feature made
it. body.rename stored its new name there, in the first line's slot, and a
rebuild from the features alone (solidcraft-cli eval of the saved file)
named member A after it. A name now moves together with the feature it
belongs to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With several bodies to send (after Add all bodies, say), the Print face
input refused every face. It took a print face only when exactly one
body was sent; any other pick was cleared at once, with a note in the
status bar only. Each body's print face then had to be set with Ctrl+B,
or by sending that body alone.
The input now holds the print face of each body being sent. A face
picked in it becomes its body's print face, in place of the one it had.
A click on a body's print face takes it out and clears only that body's.
A face of a body that is not being sent is refused with a message
(`ui.print_face_body_not_sent`, in place of `ui.print_face_one_body`).
Each change is still one `body.print_face` command, so it undoes on its
own. Picks in this window are no longer widened to the other pieces of
the face's surface, so a click on a print face takes it out rather than
adding its neighbours.
The user guide (guide/files.md) says so. The new message is in
assets/locales/pending/print-face-each-body.json, in all 31 languages;
the old one is removed from the catalogs.
Test: dialogs_save_mesh::tests::the_print_face_input_takes_one_face_for_each_body_sent
(fails without the change: the second body's face is refused).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01e2e939e jyviko: Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
- 7bba3092c jyviko: Kernel tests: variable rounds graded by the union of their balls, the removed volume to 1e-4 of itself
- 0b1cc8a8c jyviko: Kernel tests: a spline radius whose balls fold over one another at its peak is refused
- 1745e5c38 jyviko: Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch: Break Link in the context menu of projected geometry (#10417)
Projected curves and points (model edges and vertices, another sketch's
curves) could only be unlinked through command search, although Trim and
other refusals say "use Break Link on it". The sketch context menu now
offers Break Link when the selection holds projected geometry; text keeps
Explode Text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: test Break Link in a projected edge's context menu (#10417)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: Features folders scrolled out of view skip their mark
A folded Features folder shows the worst error or warning mark of the
features it holds. Working that out scans the design's whole history, and
from 16 features builds a table of all of them: per placement, on every
frame, whether the row is on screen or not. In a long tree of placements of
a part with a long history this was most of the window's frame while
orbiting.
A row scrolled out of view paints nothing (`tree_row` only takes its space),
so its mark is now worked out only when the row is on screen, as the
placement rows already do for their own state. The rows on screen show the
same marks.
Refs #6083
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scale tests: time each frame of an orbit around a large design
`scale_tests::orbit_frame_cost` (ignored, manual) turns the view with the
right button over a design (a STEP file inserted as the app opens one, a
design file, or the generated assembly) with the model scene built, as the
app builds it once a renderer is there. Per frame it times the window
thread's frame and its named steps (`frame_watch`), egui's tessellation,
and the renderer's prepare, draw recording and GPU work on an offscreen
device (`OffscreenFrames::frame_parts`); without an adapter it times the
window thread alone. `painted` fingerprints the tessellated picture once
the view rests, to compare two builds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On XZ a sketch's y runs along world -Z, so a value written as a height lands
below the plane; only the modelling skill's reference said so. The command's
parameter text now gives the axes of all three origin planes (XY: +X, +Y;
XZ: +X, -Z; YZ: +Y, +Z), and a test pins them.
Assisted-by: LLM
`component.insert_design` links a design saved as a .sc container or as plain
JSON (`.json`), but `component.relink` refused every path that was not a
container ("choose a saved .sc design"), so a component linked to a JSON
design could not be pointed at another one. Relink now takes any design path
Insert Design takes (`is_design_path`: .sc, a legacy extension or .json); the
file is read by the same `design_bodies`, which already reads both. The Relink
Source file dialog opens on a filter that lists .json among the designs, too.
Assisted-by: LLM
* claim: #10258
* Sketch: construction lines with a length (#10258)
The horizontal, vertical, angle, parallel and perpendicular construction
line commands take an optional `length`: the line becomes a construction
segment from `at`, running towards `near`, held by a length dimension
that follows its expression. Without `length` the line stays infinite,
as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cf5e0e3c1 jyviko: Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
- In entry_row (crates/ui-egui/src/browser.rs), use live rather than cached for the property
- Ensures eye toggle dynamically fades or unfades rows for sketches and bodies without requiring a cache rebuild
- Add regression test in browser_card_tests
Fixes#9953
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7577e032f jyviko: Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 922ee28f3 jyviko: Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
- 19455396b jyviko: Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
- 4df3adc5a jyviko: Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
- 539d12648 jyviko: Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- aa41c0b5d jyviko: Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
- 05f5e8601 jyviko: Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
- 9d4f78001 jyviko: SMLib: pin d01d7b0 (the new blend's one Gⁿ section generator: the chord, circle and curvature sections, and the variable rounds as the union of their balls)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Saving a design with its model cache asked, for every state, for each sheet-metal body it holds,
and built that sheet's JSON record each time only to find it written already. A design of 906
states with 300 sheets spent most of its save there. The sheet's text written straight from it
is the key now; its record is built only the first time. The records and the file are the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Find a saved model's sheets by their text, not a record built per state
Saving a design with its model cache asked, for every state, for each sheet-metal body it holds,
and built that sheet's JSON record each time only to find it written already. A design of 906
states with 300 sheets spent most of its save there. The sheet's text written straight from it
is the key now; its record is built only the first time. The records and the file are the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Write the model cache manifest without copying the model's records
The manifest was built as a JSON tree, which copied the whole model's records (13 to 33 MB of
records in large designs) before writing them, and a cache too big for the file wrote it again for
each try at fewer states. The manifest is now written from the records where they are, its fields
in the sorted order the tree wrote them, so the file is the same byte for byte.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10063
* docs: add a design approach and workflows chapter to the user guide (#10063)
Adds guide/design-approach.md after the window tour: the parametric idea, principles for designs that change well, the timeline and rollback marker, bodies vs components and occurrences, common workflows with links, a term map for users of other CAD software, and where to find help.
* docs: match the chapter to the app's labels and sketch colours (#10063)
Checked in the web app (0.29.0): the timeline strip is headed History, the toolbar shows New Sketch and Parameters for Create Sketch and Change Parameters, and fully constrained geometry turns white in the default dark theme rather than dark.
* docs: tighten the design approach chapter's wording (#10063)
The glossary covers most, not all, of the chapter's terms; Redo moves forward; the timeline is shown as the History strip; Report a bug drafts a report for the user to file and sends nothing itself.
A flat node's roundoff allowance took a hypot per control point. Twice
|x| + |y| bounds each hypot from above with room to spare for rounding,
and rounding keeps sums monotonic, so whenever the flatness test passes
with that larger allowance it passes with the exact one too. Only nodes
whose chord distance comes near the 0.5 px bound (or with a non-finite
term) now take the exact hypots, and they decide as before.
Same result for every node: the reference comparison test still matches
bit for bit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A caller that only needs the bodies' names (assembly occurrences included,
e.g. "Body2 (Part:2)") had to measure every body, or read document.inspect,
which lists definition bodies only. `inspect.measure {names_only: true}`
returns each world body's name and its definition's name, honouring the
`bodies` filter; an unknown name is refused before anything is measured.
The MCP `measure` tool passes it through, directly and as a batch step;
`summary` leaves such a list as it is, since there is nothing to narrow.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8876
* Add optional viewport-only Kawase blur and native UI composition
* Fix vendored panel hook imports and deprecated float constant import
* Drain texture updates in the full GPU blur fixture
* Hold the blur evidence fixture camera fixed across radii
* Address blur compositor lint checks
* Share animated Render preview background with blur source
* Use resolved Design background for blur source
* Exercise blur rendering independently of software adapter policy in CI
* Use stock egui hosts instead of vendoring the full crate
* Preserve feature-window open handling with stock egui hosts
* Target the native Window in close-handling regression fixture
Show F2 beside Rename on context menus where F2 already renames the
target (bodies, features and sketches, construction planes, components and
occurrences, browser groups, and canvases). Saved views and joints remain
without a shortcut label because F2 does not rename them without a menu.
When a context menu is open, pressing F2 routes through press_shortcut to
rename the menu's target (such as a clicked browser group or canvas) and
close the menu, rather than renaming the viewport selection.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Gemini 3.8 Flash <noreply@google.com>
Each node of the display curve sampler recomputed a control point's
seven clip distances for every clip plane it tested (up to 7 times for
the reject test, 3 more for the depth test, once more for the cut), and
projected each point to the screen twice. They are now worked out once
per node into arrays and read from there.
Most nodes are split rather than drawn. A node is flat only when every
control point lies within the pixel bound of its chord after adding a
roundoff allowance that is never negative, so a point already farther
than the bound decides "split" on its own; the allowance (four hypot
and divisions per point) is now left out for those nodes.
Same values in the same order: the reference comparison test from the
previous commit still matches bit for bit.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The doc comment of the ground shadow had slid onto build_sketch_scene when
that function was added above ground_shadow. Give it back to ground_shadow
and describe what build_sketch_scene builds.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Coincident: a selected line midpoint is a point it takes (#10311)
A selected midpoint goes to the command as {midpoint: line}, as
Horizontal/Vertical's alignment takes it, but Coincident wanted a point
id and refused it with "b must be a point or curve". The command now
puts a point at the line's middle, tied there by a Midpoint constraint
(or uses the one already tied there), and makes that point coincident
or puts it on the other curve, in one undo step. The toolbar button and
the context menu send a selected midpoint that way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Coincident: test a line midpoint in the command, the toolbar and the context menu (#10311)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: open a design a feature at a time (#10198)
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: open a design a few features a frame, with progress and Cancel (#10198)
On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: design links and the files window open designs with progress and Cancel (#10198)
Design links (?open=URL, as embedded viewers use), the files window and
designs opened from the computer went through the one-shot open_path,
which froze the page on a large design. They now use the staged open; a
design link becomes an unsaved copy under the link's name once the open's
reply arrives (SolveApp::open_path_answered).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: open a design a feature at a time (#10198)
OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: open a design a few features a frame, with progress and Cancel (#10198)
On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A sketch holding a text whose words come from a text parameter is left
unsolved after the words change and its links then move far, with the
warning "the sketch constraints conflict (k1, ..., k10)". The same two
changes the other way round solve.
Repro: a sketch with three projected points, a construction rectangle on
them and a centred text along its far side, the text's words given by a
text parameter. Change the parameter's words, then move the source
geometry about 280 mm. Without the word change it solves; with it, the
sketch warns of conflicting constraints.
Other words are other outlines: the text is built anew with new points
and curves. The solve that walks a sketch from its stored state to a far
link move (and the check for sides the jump turned over) refused the two
sketches as not the same entities, and the single jump left alone failed.
`Sketch::stored_with_rebuilt_texts` gives the stored sketch as this one
has its entities when they differ only by rebuilt texts: the texts'
entities as they are now, every other point, radius, arc turn and
constraint value as stored. `Document::solve_sketch` walks from that, so
the points pair up again. Sketches that differ in anything else are
refused as before.
Test: sketch_project::side_tests::a_label_follows_its_source_far_after_a_text_parameter_gave_it_other_words
(fails without the fix with the conflict warning above).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The pixel-bounded curve sampler that draws sketch curves and profile
outlines ran again on every camera move, and each subdivision step
allocated: every span's control points were a Vec, splitting one in
half built a Vec per de Casteljau level, each node's projection was
collected into a Vec, and every drawn part grew from two vertices.
The control points now live inline in a fixed array (`Hull`, at most a
degree-9 Bezier), the halves are worked out in place with the same
`mix` level by level, the projection goes into a reused array, and a
new part starts with room for eight vertices. The arithmetic and its
order are unchanged, so the points are the same bit for bit.
Tests: `samples_the_same_points_bit_for_bit_as_the_reference` keeps the
previous sampler as a reference and compares paths, quality and budget
use over every segment kind, slanted and far-off planes, orthographic
and perspective views from far out to far in, clipped and unclipped,
with ample and spent budgets. Ignored timings:
`sampler_cost_against_the_reference` (render) and
`sketch_scene_cost_while_the_camera_moves` (ui-egui).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The web build cannot start the open-meshing thread. Its fallback counted
every body done but listed none ready, so whatever the file load opened
on the web drew no bodies and kept "Loading parts n/n" up for good. The
fallback now lists every body ready and the viewport meshes as it draws,
as the fallback meant to. Found while opening a design through the file
load in the browser (#10198).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10218
* Assembly: move sketches to the part they're drawn on (#10218)
`component.move_sketches.to_parts` moves each given sketch, or every sketch in the design, whose
plane is an exactly attached face of a part's body into that part through
`component.move_sketches`, as one undo step. Sketches with no single part to go to stay where they
are, and the reply lists what moved and what stayed, with the reason. The Sketches folder's menu
offers it for the folder's sketches (or the selected ones), and a sketch's menu for that sketch or
the selected sketches; the status bar says how many moved and why the others stayed.
`component.move_sketches` now keeps a face-attached sketch where it is on its face: the sketch is
authored in the new component's placement (the face's own when the component owns the face), and
its picked point and repair plane are carried into it. Before, a face-attached sketch moved out of
the design was left without an author placement and failed to evaluate.
* Tests: the moved part is free to move; face anchor path
* Tests: move the to_parts test to the component command tests
* Shorter label: Move Sketches to Their Parts
* claim: #4581
* View angles card: per-axis zero buttons and locks (#4581)
The readout card under the orientation gizmo already showed and edited the
view's yaw, pitch and roll in degrees. Each axis row now also has a zero
button that turns that angle to 0 degrees at once, and a lock: a locked
angle stays put while orbiting, turning with the arrow keys or using a 3D
mouse, and its field and zero button go inert, so a symmetrical view can
hold its yaw and roll at 0 while only the pitch is adjusted.
* clippy: drop needless borrow in keep_locked call
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279)
The Ellipse tool showed no value boxes. After the centre it now shows
Major radius, after the end of the major axis Minor radius; a typed value
places the point at that size and becomes the ellipse's dimension, as for
a circle's Diameter. sketch.draw.dimensioned takes major_radius and
minor_radius for sketch.ellipse, so Dimension new shapes covers it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Ellipse: test the typed radii in the tool and in sketch.draw.dimensioned, and say so in the guide (#10279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Ellipse: rustfmt the new engine test (#10279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: faster highlight with many bodies selected
* Viewport: find selected bodies by name once per highlight build
With every body of a large assembly selected, each hover change built the
highlight again and looked every selected body up along the world's bodies
(`ModelState::body` scans them), which is quadratic: about 2.2 million name
comparisons on 2,116 bodies, some 3 ms of every hover change.
The selected bodies, faces and edges are now found in a map by name, made at
the first lookup. A name held by more than one body finds the first, as the
scan did, so the same bodies are lit in the same order.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: measure hover changes with many bodies selected
An ignored scale test: every body of a design selected (a file named by
SOLIDCRAFT_SCALE_DESIGN, else a generated grid of 1,440 boxes), the pointer
moving from face to face, timing each hover change's highlight build headless
and as the app builds it on a GPU (bodies drawn from their plans, and from the
model scene's blocks). Run with `--ignored --nocapture`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fold the pending design format changes (align-axis-mask, equation-variable-unit, link-file-digests) into format 46.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Keep full names in the tooltip only when the name cell clips them, and keep
the double-click rename hint without stacking a second popup. Cover short
and long names, favorites, and double-click input with a regression test.
Co-authored-by: Codex <noreply@openai.com>
* claim: #10254
* ViewCube: an option to invert the directional rotation arrows (#10254)
A new Navigation preference, "Invert the view cube rotation arrows"
(invert_navigator_arrows, off by default): with it on, an arrow around the
cube orbits the camera the way the arrow points, as in Fusion and Inventor,
instead of rotating the cube toward the side the arrow sits on. Left and
right, and up and down, trade places, and each tooltip names the action
actually performed. The curved roll arrows are not inverted: they name the
rotation they perform, not a direction.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: consolidate Gruvbox contrast variants
* Consolidate Gruvbox variants into light and dark contrast choices
* Check both original Gruvbox viewport gradient endpoints
* Reset Gruvbox scenario state before independent theme checks
* claim: #10215
* Sketch: an option to make the part active when sketching on its face (#10215)
Preferences › Sketch › "Sketching on a part's face makes that part active", off by default.
When it is on, a sketch started on a face of another component's body activates that component
at the picked placement first and is made there, as after an explicit activate. The part stays
active, so what is built from the sketch lands in the same part.
For scripts the same is `sketch.create` `activate_part: true`; the reply's `activated` names the
component and placement. On an error the active component goes back to what it was.
* Tests: a free part, no edge projection, the sketch on the face plane
* claim: #10151
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Sketch: clicking the running tool's button ends it, so clicks select again (#10151)
The lit ribbon button of the running sketch tool started the tool over
when clicked again, so it gave no way out: every click in the view kept
drawing or measuring, and Ctrl+click never reached selection. Esc and
right-click already end a tool, but the pressed button looks like the
natural switch.
A second click on the running tool's button (large ribbon buttons and
the constraint grid) now ends the tool. Persistent analysis toggles keep
their own on/off. The old behaviour stays behind the Sketch preference
"Clicking the running tool's button ends it" (ribbon_click_ends_tool).
Fixes#10151
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #10083
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* 3D mouse: turns a rolled or upside-down view the way the cap is pushed (#10083)
In the default upright (turntable) orbit the cap's Spin rolls the view,
but its Tilt and Turn went straight into yaw and pitch, which ignore the
roll. Rolled upside down, every push moved the model the opposite way on
screen; rolled on its side, tilt moved it sideways.
The device now takes Tilt and Turn back through the view's roll before
the orbit, for the cap and for a device app over the navigation bridge.
An unrolled view behaves exactly as before; Free orbit was already
view-relative and is unchanged.
Fixes#10083
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #6606
* Sketch: held solves that cannot succeed give up sooner (#6606)
A status-only solve (the held solves of a drag) only asks whether it
succeeds. When LM sits in a least-squares valley of conflicting
constraints it crawled on to its 500-iteration limit, and a held solve
runs LM up to three times. Such a solve now leaves a component once the
iteration has stalled far from a solution: over the last 20 iterations
the sum of squared residuals fell by at most 1e-5 of itself while the
largest residual is still above 1e-4 mm.
Successful solves are unaffected: on about 62,000 LM runs that succeeded
(the sketch and engine tests and 120 generated sketch scripts with 2,900
drags) the slowest still fell by 1.4e-3 over any 20 iterations while
that far off. Solves with an analysis keep iterating (their report names
the violated constraints), and live frames are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- sketch.rectangle.center and two_point: a corner given with expressions is a fixed point that follows its parameters, as with sketch.line
- sketch.circle.center: a radius or diameter naming a parameter is a driving dimension; a string naming none is just the number; bare numbers read in the design unit
- A radius that is not a number is refused with its own message and no longer passed over for diameter
- sketch.circle.two_tangent: a string radius reads bare numbers in the design unit
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #10079
* Browser: a click just past a feature's name selects it instead of opening its sketch (#10079)
The Edit Profile Sketch button on a browser feature row began 2 points after
the name, so a click that landed just past the name, or a press on the name
that slipped a few points before its release, opened the profile sketch.
The button now starts 8 points after the name, wider than egui's 6-point
click slop; the gap selects the row like the name does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10138
* Follow the system language on a first start (#10138)
The language preference defaults to a new 'system' value: the OS locale
(sys-locale) is matched against the catalog list - exact tag, base
language, then English - and a System choice sits at the top of the
Preferences language list. A saved language still wins.
* Drop the explicit deref clippy flagged; regenerate THIRD-PARTY-LICENSES.txt for sys-locale
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
The three sketch chamfers take `points: [corners]` (a point reference or
{a, b} each), as sketch.fillet does: every corner is cut alike in one
edit, and a corner that can't be cut, or is named twice, refuses them all.
The Chamfer window sends every picked corner instead of refusing a second.
Claude-Session: https://claude.ai/code/session_01PVKpSVXR9iiwSM9B25kpvq
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation: an NX mouse mapping
NX's CAD1 scheme drags the middle button to rotate, middle + left to zoom and
middle + right to pan. The mouse mappings here hold one button at a time, so
the preset takes the middle drag with Shift (pan) and Ctrl (zoom) for those two
drags, leaves the right button to the context menu, and fits on a middle
double-click as NX does.
The help text says which NX drags the modifiers stand for.
* Navigation NX note: translations for the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation NX note: use the message id nav.nx.help in the pending file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: clarkliu <277482660@qq.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9570
* Cross-fade the viewport grid between levels while zooming (#9570)
grid_step switches the spacing in a step (1, 2, 5 times a power of ten), so
the whole grid swapped at once as the view zoomed through a switch and
popped over and over while scrolling. Near a switch the drawn grid now
draws the outgoing and incoming levels together, weighted by a smoothstep
over about 19% of zoom either side, each level's lines on their own places
on the plane so a fading level never shifts. A line both levels share is
drawn once; its colour and width blend between minor and major.
grid_step itself is unchanged, so sketch snapping, dash lengths and the
tools keep their spacing; the dominant drawn level is always grid_step's.
The viewport and the headless picture share grid_lines, so they still draw
the same grid.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fade out the fine grid before a non-nested coarser level appears (#9570)
The levels go 1, 2, 5 times a power of ten. From 1 to 2 and from 5 to 10
every coarser line is also a finer one, but 5 is not a multiple of 2, so
cross-fading the 2 and 5 levels drew lines at 0, 2, 4, 5, 6, 8, 10 mm at
once, which looked restless.
At that switch the finer level's own lines now fade out over the first
half of the cross-fade and the coarser level's own lines fade in over
the second, so the two are never drawn together. The lines both levels
share (every 10 mm, the finer level's major lines) stay at full strength
throughout, so the grid never goes blank. The cross-fade spans the same
zoom range as before, and the nested switches cross-fade as they did.
grid_levels keeps its shares (adding up to 1, grid_step's level the
stronger one); grid_lines draws a line only one level has as strongly
as that level's own lines. The headless and viewport tests now check
half strength at the nested 5 to 10 switch and no 2 or 5 mm line right
at the 2 to 5 switch; a new test zooms through 2 to 5 in four decades.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10091
* View cube and axis gizmo: a standard view centres and fits the model (#10091)
A new Navigation preference, "Fit the model after a navigator view change"
(`navigator_fit`, off by default): with it on, a face, corner or arrow of
the view cube and an axis tip of the gizmo look at the middle of the model
from the one distance that fits its bounding sphere, so Home, an opened
design and every view chosen on a navigator share one zoom and one centre
and only the direction changes. Off, both navigators turn in place as
before.
"Home and Fit size" (`home_fit_size`, 10–100 %, default 100 %) is how much
of the view between the panels and the controls the model fills when Home,
Fit, an opened design or a navigator view change frames it; 100 % is the
framing as before.
`view.navigate` takes an optional `fit: true` with a direction or a turn,
so programmatic callers get the same framing.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Assistant: the agent list and the boxes under the switcher keep the panel's margin (#10172)
The agent switcher above them sits in the panel's side margin, but what
the panel draws under it before a connection (the Agent row with Add
agent and Refresh, the agents found, what isn't installed, the New chat
confirmation and the sign-in box) started at the panel's very edge, and
Refresh was cut off at the right. They now keep the same side margin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: test that the agent list keeps the panel's side margin (#10172)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: the margin test passes the labels without a needless borrow (#10172)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4376
* Selection: a freehand lasso that takes what is wholly inside it (#4376)
The SELECT panel gets a Lasso checkbox (UiState::lasso_select, ui.set
lassoSelect). With it on, a primary drag from empty space draws a
freehand loop; the release selects through the same path as the window
box: items whose points are all inside the loop and no segment crosses
it, so a concave loop leaves out a curve that bulges out of it. Shift
and Ctrl add as with the box. ui.drag takes via waypoints (and scenario
drag steps take more than two points) so agents and tests can draw it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 19014f38a jyviko: Kernel rig: constant rounds of the exact classes, and a tee's round
- 73416a9bf jyviko: Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
- 60923d8cc jyviko: SMLib: pin 7ac037e (the new blend's tangent-end event, zero-speed G2 ends, and its exact-class rounds)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Arabic: isometric view wording in the Extrude view preference
* Arabic: equation curve range unit option and note read naturally
* Arabic: tanween spelling in the new bold-font and delete-first messages, menu and option names quoted in the graphics card note
* claim: #5019
* sketch offset: chain lines whose corners are coincident, not only shared
Lines drawn one by one meet at their own points held by Coincident
constraints. The offset walked shared points only, so each such line was
offset on its own, to the left of the way it was drawn: a closed
rectangle came apart, both horizontals moving up. The same split shows
next to a fillet or chamfer, whose other corners stay Coincident pairs.
Chain ends held by a Coincident constraint as one joint, the way
Sketch::chain() and axis_implied already do, so a closed outline offsets
as one closed shape.
Fixes#5019.
* test(sketch): cover coincident offset loops after trim and blends
* refactor(sketch): share and cache coincident endpoint groups
* claim: #1936 (Fillet, Chamfer, Extrude, Shell and Draft edit dialogs)
* Fillet, Chamfer, Shell and Draft: a stored number edits with its unit (#1936)
Their edit dialogs showed a value stored as a bare number as it was, so a
fillet made with a radius of 2 opened as "2" and a chamfer angle of 30 as
"30", where the other dialogs, and since #2107 the Plastic ones, read
"2 mm" and "30 deg". The Fillet radius, the Chamfer distances and angle,
the Shell thickness and the Draft angle now go through shown_expr, as the
Plastic dialogs do.
Extrude is left as it is: its editor keeps an unchanged expression exactly
as stored (extrude_edit_tests), and writing the unit would change it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offset Face, Stock, Offset Plane, Plane at Angle, Pipe and Emboss too (#1936)
The rest of the dialog_descriptors! table's length and angle fields that
copied the stored text as it was now go through shown_expr as well: the
Offset Face distance, the Stock margin, the Offset Plane offset, the Plane
at Angle angle, the Pipe diameter and wall, and the Emboss depth. Scale's
factor has no unit and still shows as stored.
The test also edits an offset face, a stock and an offset plane.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Revolve, Thread, Rib and Web too (#1936)
The custom edit paths that copied a stored length or angle as it was now
go through shown_expr as well: the Revolve angle, the Thread length, and
the Rib and Web thickness and depth. The test also edits a revolve.
The Rectangular and Circular Patterns stay as they are, like Extrude:
their editors keep an unchanged definition exactly as stored
(preselect_tests::feature_mirror_and_patterns_reopen_as_feature_replays_even_for_body_creators).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9234
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Colour popover: step buttons, H/S/V fields and recent colours (#9234)
Every colour field of the app opens the same ui_kit popover. It gains:
- step buttons beside each number (R, G, B and the new H, S, V): a press
steps once, holding repeats, for live fine-tuning;
- H (degrees), S and V (percent) fields on the same gamma HSV as the square;
- a row of the last 12 colours picked in any colour field. A colour joins
when an edit is finished; fine-tuning in one opening replaces its entry.
The list is saved with the app's settings (`recent_colors`), hostile
saved entries dropped and the list capped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recent colours: keep the shared list outside ui_kit, crate-visible only (#9234)
The store and the per-frame sync with the saved settings move to
crate::recent_colors; the ui_kit colour popover only shows the list and
adds finished picks. No plain pub escape from the gallery's ui_kit rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch drag: a step that throws points far from the sketch counts as failed
A held step of a drag that moved a point more than 1000 times the sketch's
size plus the drag's way was taken as solved, so a drag could leave points
around 1.4e6 mm away while reporting it reached the cursor. Such a step now
fails like one the solver cannot solve, and the cursor correction refuses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch drag: a step that presses a line to no length counts as failed too
An end dragged past the point where its line would have to turn over (a
line held at its midpoint and by an angle, dragged past the midpoint; a
rectangle's corner dragged across the opposite side) pressed the line to no
length, where it has no direction left for its constraints. A step leaving a
line under 1/1000 of its length at the drag's start now fails like one that
throws points far away, so the drag stops just short of it (48 such drags in
4000 random sketches, none with this).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7854
* MCP batch: refuse a step with an unknown key (#7854)
A step's parameters under another key (`args`) were dropped and the
command ran without them. The batch is now refused before its first
step, naming the key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* MCP batch: a step carrying `expect` is refused, saying it is the batch's argument
#9904 gave batch an `expect` argument and tested that a step carrying one runs with
nothing checked. That is the silent drop this branch refuses: the step is now refused
before it runs, and the error says `expect` belongs to the batch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Light a feature's faces after a later edit renamed them
Selecting a feature in the Browser or the timeline lights its geometry on the
model, by the face names the feature gave (`F<feature>:…`). A later edit that
moves or renames those faces (Offset Face, Replace Face, Delete Face) leaves
them named after whatever last touched them, so selecting the earlier feature
lit nothing.
When no face carries the feature's name, compare the model states either side
of it instead: a face whose name is new, or whose area, centroid or plane
moved, is a face the feature changed. Each is found on the body as it is now
by its name, or by a parallel plane and nearest centre, so a face a later
feature moved again is still lit.
The Browser row of the feature a picked face belongs to already lights; that
is unchanged (a body row lights too, as #3009 asks).
Test: a box raised twice with Offset Face; selecting the first raise lights
the face the second one renamed.
* Browser: light the feature of a picked face, not its whole body
Picking a face in the view lit the body's row as if the body were selected,
which in NX is not what a face pick shows: the Part Navigator marks the
feature the face belongs to. Faces, edges and vertices no longer light their
body row; the feature row of the picked face shows as selected instead
(`picked_feature`), while the session's selection stays the face or edge, so
Replace Face, sketches and the rest keep the pick they take.
The live face of the view still lights the face itself; the timeline already
marked the feature of a picked face and is unchanged.
Tests: the browser's 178 tests pass (selection arrays unchanged; only the
rows lit differ).
---------
Co-authored-by: clarkliu <277482660@qq.com>
The second fillet of a side whose radius is half its length needs all
that is left of the line, and was refused as too large. Such a fillet
now takes the whole line: the line goes, the arc ends where the line did
and is tangent to the curve that goes on from there. A 20 x 10 rectangle
filleted with r = 5 becomes a slot, a 10 x 10 square a circle. Several
corners in one call keep their arcs by id, as removing a line renumbers
the curves.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7507
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Fillet: a corner held by Coincident takes a fillet when a dimension measures to it (#7507)
Before rounding a corner whose two lines meet only through a
Coincident constraint, Fillet and Chamfer weld the two points into
one, but not when anything else referred to the second line's point,
such as a dimension measuring to the corner: the fillet was then
refused ("the lines must share a corner point"). The point is now
welded as well, and what referred to it refers to the corner, the
same place. A point that a constraint names together with the corner,
or a linked point, is still not welded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two selected lines that stop short of each other or cross were refused
with "the lines must share a corner point". Now each line's end on the
shorter side of their meeting point moves there first (extending a line
that stops short, cutting a line that runs past), and the corner is
rounded or cut as before. Parallel lines, ends held by other geometry
and lines whose length is held are refused and change nothing.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
An offset's ends follow its source curves on every solve, so a break's new
ends were pulled back: a broken offset arc came out in three pieces going
the long way round, and the solve moved curves the break never touched.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The offset sets an offset circle's radius from its source after the solve,
but the solve still counted that radius as a free unknown, so a
dimensioned circle and its offset reported 1 DOF instead of 0. Lines and
arcs were not affected: the offset already holds their end points. The
solve now holds an offset circle's radius too.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10057
* Pattern and Mirror dialogs: explain Object Type, and say why a sketch is not taken (#10057)
The Object Type row of the Rectangular, Circular and Path Pattern and Mirror
dialogs gets a tooltip saying what Bodies and Features are and that a sketch
is neither. A sketch clicked for their objects, in the view, the Browser or
the History, now shows a hint naming what to pick and what to do with a
sketch instead of being ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8706
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: measure faster, show progress, and stop when closed (#8706)
Properties on a large assembly measured every placed copy of every body
afresh (transform plus three fine tessellations each), so it took minutes.
#5203 (in #8103) already moved the measurement beside the window; this
builds on it.
- A rigid placement reuses the body's own cached measurement: volume, area
and counts unchanged, centre placed, box from the placed corners (quarter
turns) or from the body's shared mesh placed (other turns). Scaled or
mirrored placements are still measured as placed.
- Bodies are grouped by component once and the subtree traversal groups
occurrences by parent once (both were quadratic).
- The measurement beside the window is watched by a Progress: the card
says "Measuring... n of N bodies" with a bar, and closing it (or
switching designs) cancels the worker at its next body instead of
leaving it running.
- component.properties and occurrence.properties are answered on a copy for
control-channel requests too, as inspect.measure is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: count the measuring work instead of timing it in the reuse test (#8706)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A switch between design tabs cancels the open dialog and tool of the design
left and shows MODEL. With the new Interface preference "Keep dialogs and
tools open when switching designs" (keep_work_on_tab_switch, off by default)
each tab keeps its dialog (with its picks and values), its editing state, its
tool and its toolbar tab, and has them back when it is shown again. A feature
still computing after OK is cancelled as before. A feature edit's saved source
revision follows the view refresh of the switch, so its Cancel still restores
the history.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9743
* Update Links: linked designs that changed while the tab was away come back as one undo step (#9743)
Coming back to an assembly's tab read each changed link in an Update Links
run of its own, so each became its own undo step: one Undo took back one
component and left another copy of the same part at the new version.
component.update_links now takes `components`, a list, and goes on past a
design it cannot read: that link keeps its bodies, is named in `failed` and
gets a warning. The tab return sends one request with every changed link,
records as read only the ones that were, and says on the status line which
one could not be read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: the delete runs with what its check computed ahead (#9917)
With the history rolled back, a delete builds the history after the
marker to see what it breaks, once in the check that runs off the window
thread (Session::ahead) and once more in the delete itself, on the window
thread. The check's results were lost on the way: the dry run's scratch
session and the whole-history copy dropped what the model keeps, and the
check's kept results never reached the delete. The scratch and the copy
now keep what their model keeps, and the delete (at once or after the
confirmation) runs with the check's kept results, so it finds the
history there instead of building it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: test that a confirmed delete runs with what its check kept (#9917)
With the history rolled back, deleting a side of the plate's outline is
checked off the window thread and confirmed first; the confirmation
carries the check's kept results, and the delete adds nothing to them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10050
* Hide the origin point behind bodies like the axes and planes
The origin point is a flat dot painted after the 3D scene, so it always sat
over bodies while the axes and planes respect the through-bodies rule
(#2697, #2618). Ask the meshes the same question the depth test asks the
axes: is a nearer kept face in front of the origin along the view ray.
Fixes#10050
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a3165f62d jyviko: Rig: fillet corners graded curvature-continuous, the default to be
- be0b1b39b jyviko: Rig: the test-peg's front chamfer builds
- 6cd4003ad jyviko: Rig: the curvature-continuous corner cases pick the curvature fillet
- 4401ffb1f jyviko: Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch: a centre rectangle's centre lines up with the axes when dragged (#10086)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a centre rectangle's centre lines up with the axes when dragged (#10086)
A centre rectangle's centre is held at the middle of a construction
diagonal (Midpoint), on none of its curves. Dragged by the centre, the
rectangle's own lines stayed snap targets and held the centre at their
middle, so it never lined up with the origin; dragged as a whole, the
centre wasn't a moving point, so only the corners lined up.
drag_snap::moving_points now takes all dragged entities at once and
treats a point held at a line's middle as going where the line's ends
go: it moves with a line whose two ends move, and when it is dragged
its line and the shape round it are no targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #10066
* Keep one dialog field active at a time (#10066)
Pick fields drew their accent ring from the dialog's active-input index
while text editors drew theirs from egui keyboard focus, so a Circular
Pattern dialog could show Axis and Quantity active together. A pick
field now drops its ring while a text editor holds the keyboard, and
clicking a pick field (or its clear button) takes the keyboard back.
Selection routing (d.active) is unchanged.
* Format editor_has_focus onto one line
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Navigation: wheel and trackpad gestures go on under a value box (#10061)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation: wheel and trackpad gestures go on under a value box (#10061)
Any area above the model took navigation's wheel input, so a two-finger
pan, orbit or zoom stopped as the pointer crossed a floating value box
(Extrude's distance), and none could start over one. Model-anchored
canvas areas (Surface::Canvas: value boxes, a dimension's editor,
readouts) scroll nothing: navigation's wheel, trackpad pan and orbit and
pinch now go on under them. Their clicks stay theirs, and with value
stepping on the wheel stays with the value under the pointer.
Container::area records the canvas areas it builds; navigation asks
whether the top layer under the pointer is one (container::is_canvas).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Rename Body: a pasted placement's body renames by the name the browser shows (#10017)
The browser lists the bodies of a component's second placement by their
placed names (`KB (K:2)`) and the context menu's Rename sends that name,
but body.rename looked it up only among the model's own bodies and
refused it ("no body"). It now takes a placed copy's name as the body it
shows, as appearance.assign does (#9740): the body is renamed in its
component, so every placement shows the new name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename Body: test renaming a pasted placement's body by its placed name (#10017)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename Body: the test also hides the copy first and undoes the rename (#10017)
A copy hidden by its placed name stays hidden under its new name, and
one undo brings both names back (checks from the review on #10026).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9079
* Modify ▸ Delete with nothing selected asks for a pick instead of a parameter error (#9079)
Starting `timeline.delete` from the ribbon, the command palette or the
control channel ran it with no parameters, so the notice showed the
engine's check ("`features` must list features, or `groups` timeline
folders"). It now deletes what is selected, as the Delete key does, and
with nothing selected shows a hint saying what to pick, changing nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10005
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* F2 renames a group clicked in the Browser (#10005)
A group has no selection of its own: clicking its Browser row only
records it as the picked folder, which V uses. F2's rename_selection
looked only at the selection, picked components and canvases, so on a
group it did nothing, or renamed a body that was still selected.
F2 now takes a clicked group row first, as V does, and opens the same
Rename box as the group's context-menu Rename, which commits through
browser.rename_group. This works for groups inside components as well.
Fixes#10005
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #7974
* Viewport: dark parts keep their shape: linear-light shading and a sky fill (#7974)
Preferences > Graphics "Keep the shape of dark parts" (off by default)
shades the viewport in linear light: the key light and eye fill over a
sky fill that grows as a face turns up, plus the 4% of that sky every
dielectric reflects (a little more toward grazing), encoded to sRGB
once. Near-black faces keep a gradient; light and mid-grey faces stay
within a few levels of the sRGB shading. The world's up direction and
the switch ride in a new `sky` vec4 at the end of the viewport uniform,
and the frame key, so turning it on redraws. Off, the shader takes the
old path unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: a shortcut recorded from a search result takes the key (#10043)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: a shortcut recorded from a search result takes the key (#10043)
A Preferences search lists matching shortcuts with their key buttons,
but a recording started there only counted while the Shortcuts page
itself was open, and the page skipped its recorder during a search: the
key went into the search box and ran its command behind Preferences.
keymap::capturing now counts a recording while a search shows, and the
recorder runs for it; clicking back into the search field stops the
recording, so the search keeps its own typing. The recording's message,
a taken key's Use anyway / Cancel choice and the next-step hint show
above the search's shortcut matches too (outcome, shared with the page).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* fix(ui): disable bold in Edit Text when font has no bold face (#9940)
- Check whether font has bold face via font_data_styled() before enabling bold toggle
- Automatically uncheck bold and disable bold button with explanatory tooltip for built-in font
- Prevent sending bold: true in sketch.edit_text when font lacks bold face
- Add unit regression test in sketch_text::tests
Fixes#9940
* style: format choice.rs in ui_kit
* i18n: move sketch_text.no_bold to pending locale catalog with complete translations
* test(sketch_text): assert disabled bold on built-in font without error (#9940)
* claim: #9970
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Agent chat: no error when an agent does not serve session/set_model (#9970)
An ACP agent can list models in the unstable `models` field of its
session/new reply without serving `session/set_model`; it answers
JSON-RPC -32601 and the Assistant showed that as an error each time the
model was switched. Agents that offer the model as a configuration option
already go through session/set_config_option. A -32601 reply to
session/set_model is now logged at debug level instead of shown; every
other error still shows.
Fixes#9970
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Delete: the check in a rolled-back history builds the history once when nothing breaks (#9917)
With the history rolled back, the check before a delete (which features
the delete would break) built the whole history twice, before and after
the change, with the marker removed. On a large design each build ran
every boolean after the marker: deleting twelve splines took half a
minute on the window thread. Only a feature that fails after the change
can be newly broken, so the history after it is built first, and when
nothing fails there the history before it isn't built at all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: test that the check in a rolled-back history still reports what breaks (#9917)
Deleting a hole in the plate changes the plate and every cut after the
marker and breaks none of them: the check reports nothing. Deleting a
side of the outline breaks the plate, and the check still says so, with
a cache too small to keep a state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8341
Co-authored-by: Cursor <cursoragent@cursor.com>
* Graphics: keep a preferred card when surface marks it incompatible (#8341)
Prefer the saved adapter by exact then case-insensitive name, including when only listed as surface-incompatible, and explain in Preferences when another card is still in use.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Format and clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(engine,ui): allow restricting point-to-point align to chosen axes (#9946)
* style: apply cargo fmt across crates
* fix(clippy): use filter then map instead of bool::then in filter_map
* claim: History: build the row plan once per revision and draw only the visible rows
* History: build the row plan once per change and draw only the rows in view
The vertical History worked out its rows from the design on every frame: for each row it
searched every folder's last feature (cubic in features and folders), cloned every name, and
looked up each row's result, sketch and selection by a linear search. It also drew and
hit-tested every row, including the ones scrolled out of view.
- The row plan (features, folders' depth, extent, header places, contents and joints, the rows
with listed sketches, which sketches have patterns) is built once per design change, keyed
by session, revision, marker, counts and the "Sketches: under their feature" choice, and kept
in the egui context; the visible order is kept beside it until a folder or fold opens.
- A feature row outside the scroll area's clip takes its place and publishes its handles, but
is not drawn or made interactive; one being found, dragged or focused, or under an open
menu, is drawn as before.
- Selection and results are collected once per frame; folder rows read their contents from
the plan.
- The horizontal strip collects the picked features (selection and dialog items) once per
frame and writes a chip's tooltip only while it shows.
Tests compare the plan with the per-frame searches it replaced on tangled folders in every
fold state, the kept plan with a fresh one after each kind of change, and the History drawn
with every row against the culled one (same places, same text in view, fewer rows drawn).
An ignored test times the panel on a large design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop a needless borrow
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8749
Co-authored-by: Cursor <cursoragent@cursor.com>
* Recover egui chrome after a long pause between frames.
Sleep/wake can leave the window black while the GPU device stays up: re-upload
the font atlas, clear cached icon textures, and repaint when the frame clock
jumps so the ribbon and panels are not stuck blank (#8749).
Co-authored-by: Cursor <cursoragent@cursor.com>
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)
A dimension placed while a constraint fixed what it measures goes in
driven, and stayed driven once that constraint was deleted: a
double-click only said it has no value to edit. The double-click now
tries making it driving on a scratch copy; when nothing else fixes it,
the value box opens at the measured value, and Enter makes it driving
(sketch.toggle_driven) at the typed value (parameters.change) in one
undo step. A refused value goes back to a checkpoint, so it stays
driven. While something still fixes it, it stays read-only as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9945
* Sketch: Project gives its new curves the selected line type (#9945)
The sketch palette gives the drawing line type (construction, centerline, infinite) to the
curves a SKETCH › CREATE command reports under `curves`. Project reports what it made per link,
`links[].curves`, so its curves were never found and stayed normal lines whatever the palette
said. `apply_mode` now also reads the links' curves, so a projected line becomes construction,
centerline or infinite and a projected circle construction, in the projection's own undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9489
* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)
With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the cursor label names the command in words (#9489)
The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Show/Hide put every sketch it showed in `shown_sketches`, the list of
finished sketches kept shown although a feature uses them. Hiding and
showing a sketch nothing used yet put it on that list, so once an
Extrude used it, it stayed shown instead of hiding itself as a sketch
never hidden does. Show now marks only a sketch a feature already uses;
one nothing uses is shown anyway and leaves the list alone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: view corner Cancel cancels an unfinished tool first (#6709)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* View corner Cancel: cancel an unfinished tool before the sketch (#6709)
With OK and Cancel in the view's corner on, the cross took the whole sketch
even with a line half drawn. It now takes the steps one Esc takes first (a
drag, Select Other, the tool's points, then the tool) and cancels the sketch
only when nothing is unfinished. Esc and the cross share cancel_unfinished.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9333
* Equation curves: the variable can carry its range's unit (#9333)
A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Engine: lower the per-command cost of evaluating large designs
* Engine: lower the per-command cost of evaluating large designs
- The fingerprint texts of features are kept in one store shared by every
worker, not per worker: a command evaluated ahead runs on a new worker each
time, where the per-worker store was always empty and every feature was
written out again. Same texts, same hashes.
- Pinning body names after a command keeps, per feature, the names of the
bodies it made with the state they were read from, so it no longer searches
every result's bodies (features x bodies per command), and finds results by
their index before searching.
- Pinning fingerprints the timeline again only from the first renamed feature
(or a pattern or mirror of features replaying one) when the model proves its
fingerprints are the design's; the fingerprints are those of the full pass.
- The evaluation cache's byte count looks bodies and sketches up instead of
searching them per body (bodies squared per feature). Same counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9176
* Preferences: turn the view to isometric when Extrude opens, and back afterwards (#9176)
Two new preferences on the Design page, next to "Extrude to a picked target", both off by
default:
- `extrude_view_isometric`: each time Extrude opens, the view turns to the isometric view, so
the depth can be seen right after a sketch seen face-on.
- `extrude_view_return` (only with the first): when Extrude closes, by OK, Cancel or Esc, the
view goes back to where it was before it turned, keeping the projection as the end of a sketch
does (#7038). The check is per frame, so every way the dialog closes is covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* MCP: batch and execute take expect {volume, bodies, bbox} and flag a mismatch (refs #3380)
An optional `expect` argument on the `batch` and `execute` tools: the volume
(with a relative `tol`, default 0.002), body count and bounding box (0.05 mm)
the agent computed before building. Once the call has gone through the server
measures the design as the `measure` tool does and the reply gains
`expectation: {ok, measured, expected, mismatch}`. A mismatch flags the tool
result `isError` with the mismatch text first; the design is kept as built.
A malformed `expect` is refused before anything runs. Without `expect`
nothing changes, and a batch step carrying one is a step with a stray key.
In 29 logged agent sessions every agent computed these numbers beforehand
and then spent a `measure` call plus a comparison by hand after every stage;
one missed a 0.25 mm skin until it compared. Volume and body count are
kernel-independent checks.
Refs #3380
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP expect: filter then map for the bbox coordinates that are off (clippy)
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: expect's coordinate text helper no longer shares a name with the JSON reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* claim: Save: hard-link the backup copy and check for unsaved changes once per revision
* Save: keep the backup as a hard link and check for unsaved changes once per revision
The backup of a save is the old file under a second name (a hard link renamed over the
old .bak) instead of a copy written out again; where links are refused (FAT, shares,
cloud folders) or the old file cannot be flushed, it is copied as before. Every point a
save can stop at leaves the design file whole and the backup the version before it.
Session::is_dirty compared the whole document with the saved one each time it was asked,
which the window does every frame for every tab. The answer is kept per revision and pair
of documents; the cache holds both, so neither can change in place while it stands, and
doc_mut lets it go first so edits stay in place.
On the rover in two unsaved tabs an idle frame takes 15.0 ms instead of 19.3 ms; a save
with its backup of the 11.8 MB file writes in 9.6 ms instead of 18.9 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the system note reaches agents beyond the Claude adapter
The note only went out as `_meta.systemPrompt.append`, an extension of the
Claude adapter, so Codex and Antigravity never saw it. It now also goes in
the standard ACP `systemPrompt` field for agents that offer it, and in
`_meta.antigravity.systemPrompt.append` for Antigravity.
Fixes#9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- 247 help texts (help.*) and 95 UI messages: theme options, viewport status, quick measure, personal sheet-metal rules, analysis details, sketch report
- Terms aligned with fr.json; no-break space before : ; ? ! as in the catalog
- Pending file, folded on main after merge
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #9919
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: with every body hidden, a new extrude stays New Body instead of turning to Cut (#9919)
Smart Extrude passed the shown bodies as `participants` to keep hidden
ones out (#6901), but with none shown that list was empty, and the
engine reads an empty list as the whole scope: a profile on a hidden
body chose Cut, which has no shown body to change, so nothing was
previewed and OK did nothing. With no body shown it now chooses New
Body.
The operation it latches for a side is also decided again when a body
is shown or hidden while the window is open, as a new start already
does (#467): showing the body an extrude goes into turns it to Cut,
hiding it again back to New Body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9916
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: the window can be dragged by its title (#9916)
The window was pinned at the top middle of the screen (ui_kit::Window
anchor), over the model, in a sketch or not. It now starts there and can
be moved (`placed`), as the file-load card can.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
The `initialize` instructions were one paragraph of command shapes. Replace
them with version-neutral guidance: read `skill_reference solidcraft-modeling`
first, plan the numbers, build in a few `batch` calls, the primitive routes
and the fillet-shell-inside-holes order, what follows a parameter, `measure`
after each stage with a coalesced parameter check, and `timeline.edit` /
`parameters.change` / `edit.checkpoint` to fix instead of rebuilding. The
Assistant's system note gets the same pointer; docs/mcp.md says so.
`instructions_name_only_real_tools` now checks the command ids as well as the
tools, and `instructions_recipe_builds_a_parametric_shelled_box` builds a part
the way the instructions describe and checks its volume, axes and parameters.
Refs #3380
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: measure summary and body_topology faces: cylinders for small verification replies (refs #3380)
`measure {"summary": true}` replies one short object per body (name,
volume_mm3, bbox, faces, closed) with body_count and total.volume_mm3,
as a tool and as a batch step. `body_topology {"faces": "cylinders"}`
replies only the cylindrical faces, the kernel's split halves merged
by radius and axis line into {radius, origin, axis, extent, names},
and no edges. Both defaults are unchanged. The merge uses only what
model.faces and model.edges already reply.
Measured on a 13-feature enclosure, body_topology is 74 KB and measure
1.1 KB per body; agents filter them with scripts, and seven of 29
benchmark runs asked for exactly a cylinders-only listing.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: keep body_topology's cylinder merge next to check_parameters' without a name clash
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* Claim part of #9738
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: default names skip names in use (part of #9738)
Contact sets, motion studies and exploded views were named by how many
there were, and a component's placements by how many it had, so after a
delete the next default name repeated one still in use, and commands
given that name acted on the first. They now take the first number no
item has, as joints' and the app's dialogs' default names already do; a
placement keeps the next number when it is free.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9858
* 3-Point Circle keeps snapped clicks as coincident constraints (#9858)
The tool sent only the three clicked positions, so a click snapped to a
point or curve left no constraint and the circle was free once drawn.
Each click now goes as its snap, as the 3-Point Arc's do, and the engine
adds a PointOnCurve for each referenced point, as the centre circle's
through click does (#3099).
* Fix#9858 test: assert the clicked midpoint point, not the line end
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A new tool that checkpoints the design, sets every value in one
parameters.change, reports measure, errors and cylinder axes, and
restores the checkpoint, so the loop set_parameter / measure /
body_topology / set back costs one call and one rebuild.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Claim #9739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: one changed while the assembly was closed is read when it opens (#9739)
A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: read what changed last when a design opens in place of the blank one (#9739)
A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Adds the last 79 German translations for messages that exist in en.json
but are missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the agent chat tool summaries,
the history, sending to a slicer, Perforate, the window system and the
web app.
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the Render studio (lighting,
environment, sun, depth of field), bounded volume and interior scattering,
saved shots, the timeline messages, thread direction and the agent chat
and endpoint settings.
* claim: #9860
Co-Authored-By: Claude <noreply@anthropic.com>
* Sketch panel follows Dialog buttons at top (#9860)
The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.
Changes a default: no
Co-Authored-By: Claude <noreply@anthropic.com>
* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9742
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* joint.drive: a suppressed joint stores nothing; the reply says what was asked and why a value differs (#9742)
Driving a suppressed joint answered moved: false with "H is suppressed"
but wrote the values into the joint, with an undo step, so the part
jumped when the joint was unsuppressed. A suppressed joint outside any
motion link now stores nothing.
The reply gains `requested` (the values asked for, before limits and
links) and `held`: each driven value that ended up elsewhere, with why
(a motion link sets it, as a screw's travel follows its turn; a limit;
contact; a closed loop). A drive that moves nothing gives the first held
value's why as `reason`, so driving a screw's distance alone no longer
answers moved: false without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9735
* Sketch: conflict messages name real constraints, not the refused one's id or a false 'fully constrained' (#9735)
* fmt + clippy: contains over iter().any (#9735)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* Add German translations, batch 7 (#7237)
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the parameter list setting and
the Render panel pages: GPU material overrides, nested dielectrics, saved
optics, output size, physical background, presentation filters, preview,
quality budget, regrade and the result area.
* German batch 7: render.result_sequence follows the catalog's Checkpoint term
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 88e00486b jyviko: STEP import: a face bounded by a slit alone is the whole of its closed surface
- 3c16884f7 jyviko: Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57edcf61a jyviko: Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
- a250062c2 jyviko: Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
- b0d1ba345 jyviko: Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
- 77f127c61 jyviko: STEP import: a face bounded by seams alone runs its loop the other way, never turns over
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 889a2f866 jyviko: Kernel rig: the cut mirrored loft graded on the box its sections pin
- 37a4c5647 jyviko: Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
- 6c2a2f395 jyviko: Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
- cd56cd3ad jyviko: Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6847c97c jyviko: Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
- bfdb79418 jyviko: Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
- 130f2adaf jyviko: Kernel rig: the two G0 window patches graded on the box the part they close keeps
- 8e0f6403c jyviko: Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49c7b982e jyviko: Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
- 0bcc24ccd jyviko: Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
- 27b7e202a jyviko: Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
- 9b4162a33 jyviko: Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f2aba03f8 jyviko: Kernel rig: 616 graded on its volume (the lid less its 0.5 mm-offset cavity, sharp to rounded concave edges) and box
- 764719c53 jyviko: Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
- 4b512f69e jyviko: Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
- 63dd6ae6f jyviko: Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a53f1640e jyviko: Kernel rig: the up-down squares shell graded on its volume (the columns less the 0.346 mm-offset cavity, sharp to rounded concave edges) and box
- be8e728cd jyviko: Kernel rig: 545 graded on its volume (the frame less its 0.5 mm-offset cavity, sharp to rounded concave edges), its sealed pillar void and box
- edb558bd1 jyviko: Kernel rig: the shell-again case graded on its volume (the shelled box less the 0.5 mm-offset cavity in its walls) and box
- fd9d159f4 jyviko: Kernel rig: the arc-sided plate shell graded on its volume (sharp to rounded at the hole's bottom), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c740e4de1 jyviko: Kernel rig: 1494 graded on its volume (box and cylinder less the 1 mm-offset cavity, sharp to rounded concave edges) and box
- ba75de350 jyviko: Kernel rig: 4492 graded on its box and a volume range (the face's 19 mm sweep added, within the block's sides)
- bdb321cdb jyviko: Kernel rig: 745 graded on its volume (the end moved 1 mm plus the spline boss's exact area), faces and box
- 1893a5016 jyviko: Kernel rig: 4567 graded on its volume (the revolved spline less its revolved 2 mm offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d54d3195f jyviko: Kernel rig: 4542 fluted wall joined on a revolved base graded on its volume and box (the base by Pappus plus the fit-spline ring)
- c0c961326 jyviko: Kernel rig: 1985 and 2243 STEP-export enclosures graded on their volume and box (the outline less the cavity, plus gusset and standoffs)
- d77aac416 jyviko: Kernel rig: both 4092 loft, ribs and pad unions graded on their volume and box
- e30459e52 jyviko: Kernel rig: 1525 graded on its volume (the convex body's exact 2 mm inward offset), faces and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7fdbd5ab6 jyviko: Kernel rig: 4879 window cut through a thickened spline revolve graded on a volume range and its faces
- 18c8add3f jyviko: Kernel rig: 4623 join of crossing pleated loft skins graded on its volume and box (both skins less their overlap)
- 5fb3cfa8a jyviko: Kernel rig: 831 tapered glyph extrude graded on a volume range and box (the font's S drafted in by 10 deg)
- 34e404d38 jyviko: Kernel rig: 2357 ring of 90 cylinder segments graded on its volume and box (the segments less their 90 joint overlaps)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3c8c36ec jyviko: Kernel rig: 3243 rim and tooth join graded on its volume (rim plus the trimmed tooth less their 0.01 mm overlap)
- 9aa2651b1 jyviko: Kernel rig: 3782 emboss on a cylinder graded on its volume, area, faces and box (the wrapped 4 x 5 badge raised 1 mm)
- 391fc51b4 jyviko: Kernel rig: 3604 G2 swept-tool cut graded on a volume range (filleted box minus the swept corner section)
- 166d574cc jyviko: Kernel rig: 4505 coil joined through a cylinder wall graded on its volume, area and box (cylinder plus the wire's screw-swept segment outside r 76)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e348ae2a jyviko: Tests: rustfmt the board fixture example and the coplanar asserts
- 033d1a122 jyviko: Kernel rig: the two 3871 cone cases were byte-for-byte the 258 cases; the 258 cases carry their sources
- 780a0652d jyviko: Kernel rig: a volume or area can be graded as a hand-derived range where analysis only bounds it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43551498d jyviko: STEP import test: a seam sphere whose meridian stops short of the pole imports as the whole 2 mm ball
- 6704d3094 jyviko: Material tests: the nine copies in material_properties go; the persistence file checks the library copy's card and formats 20 and 21 in one loop
- 94acc0c43 jyviko: Sample test: one loop checks every sample builds cleanly and without a panic; the robustness copy goes
- 88c7cb6a8 jyviko: Known failing: the non-antipodal seam sphere import, refused for a loop of no (u, v) area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f81c4b157 jyviko: Chamfer history test: the chamfer after each box cut is exactly one face on the painted block too
- 9c0d6bd1f jyviko: Grid test: a pole side's face is the five triangles fanned from its one grid node, none degenerate
- 648413556 jyviko: Kernel tests: the twelve ignored print-only debug tests and surveys go; coplanar_curved_booleans checks the flush-capped cylinder cuts and unions they printed
- 35805f899 jyviko: Kernel: the #883 board fixture generator is an example, not an ignored test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 16bef1097 jyviko: Shell regression: the saddle-corner shell opened on the top box's side has its exact volume
- 699ddb6b3 jyviko: SMLib history test: every operand's order is the identity on its record's faces and edges
- ec421252d jyviko: Boolean history tests: the SMLib module's box-minus-sphere, box-minus-cylinder and box-union-box copies go; the top-level ones check more
- f87f22874 jyviko: Modify history tests: shell, offset and thicken are one test each through the public API, with the volumes, refusals and history the SMLib copies checked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94e67d4ca jyviko: Kernel loft test: the square-to-circle loft has the oracle's exact ruled volume, without printing
- 4c7d4f5c0 jyviko: Tessellation lens test: the lens's triangles fill exactly the rhombus through its arcs' midpoints
- 0d94d5f77 jyviko: Pattern test: six chamfered holes take exactly five more holes' bore and chamfer rings
- c44cbe9ac jyviko: Kernel pocket floor fillet test: the corner rounds and the floor loop round add their exact volumes, by Pappus at the corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d7bbf09e0 jyviko: Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
- 0e51ffbff jyviko: Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
- e03c72a3e jyviko: Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
- 321e56724 jyviko: Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fe9df533 jyviko: Known failing tests: the shell after a cut whose end touches an arc side builds on SMLib batch 7
- 8ec40d25e jyviko: Surface fair test: the energy falls strictly, the face moves, and the edges are read after the fair
- 697ea2ca8 jyviko: Sketch scaling test: the first dimension sets l1 to 40 and scales both joined rectangles about the origin
- e60cde8dc jyviko: Frames tests: a pick on a moved component or an instance removes the exact round and bore volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 25692b119 jyviko: Kernel rig: the ring cut frame and the up-down join shell
- 18f08bf83 jyviko: Kernel rig: #616's lid shells open at a rib's side, with the 0.15 lip
- 78b765e83 jyviko: Known failing tests: the action matrix's shells and chamfers as they fail with SMLib batch 7
- f7d4e5344 jyviko: SMLib: pin 26cc451 (batch 7: rounds past a rim, blend refusals that build, shells)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 469a3b2f9 jyviko: Naming: a blend's seams split its edge's name at the | between its two faces
- 1d818a2d1 jyviko: Fillet rig: five refused blends build, off the known-failing list
- 8550ac7e4 jyviko: Kernel rig: the trough and the pocket whose floors fall to a drain build
- 5f826a1a6 jyviko: Kernel rig: the plate with a hole through its arc side shells open at its far end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b16e8a542 jyviko: Sketch: a control spline can carry its own knots and weights
- e6abea809 jyviko: Sketch projection: a free-form edge comes in as the one exact spline it is
- f61f25c7f jyviko: Fillet rig: blends past an outer rim of their faces build, on SMLib smlib-blends-past-rims
- 09bc14dbd jyviko: Naming: test that a round of a round's end has no seam with that round's faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9740
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Body names: inspect.interference refuses an unknown body; appearance reads take a placed copy's name (#9740)
inspect.interference dropped a name that is no body, so a misspelled or
wrongly cased name left that body unchecked and two overlapping cubes
answered count 0. It now refuses the name, as inspect.clearance does,
naming the closest body when one is near enough to be a typo or another
case (cmd::no_body, on the existing edit_distance).
appearance.chain, appearance.list and appearance.replace's scope take a
placed copy's name (KB (K:2)) and a placement's (K:2) for the body and
component they show, as appearance.assign already does, through two
Session helpers: own_body_name (on body_frames) and component_or_placement,
which appearance.assign now uses too. A name that is neither is still
refused. select.set already refuses an unknown body on main (#9737).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).
With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
* claim: #9715
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715)
assembly.mass_properties (and Session::mass_properties) gives, for every
occurrence and every rigidly-joined group, mass (kg), centre of mass (mm) and
the inertia tensor about it in world and frame axes (kg mm2), the input
the multibody dynamics work needs. Bodies are measured as Properties
measures them (kernel volume and centre, mesh gyration), once per body,
then moved by each placement and combined by the parallel-axis theorem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9619
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: edit an added AI agent (#9619)
Agents you added in Preferences > AI get an Edit button between Test and
Remove. It reopens the Add agent dialog filled with the agent's name and
command, or its protocol, preset, endpoint, model and request timeout, and
Save changes the entry in place: same id, permission override and
always-allowed tools. The stored key is never read back into the dialog;
an empty key field keeps it (still only sent to HTTPS or this computer),
a new key replaces it. The control channel gets `edit_dialog`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.
Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9258
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: paste sketch geometry copied in another design (#9258)
Sketch geometry copied or cut in a sketch (sketch.copy / sketch.cut) now pastes into a sketch of another open design with Ctrl+V or the context menu, at the cursor or at the copied coordinates, with the constraints and dimensions among it. A dimension whose expression names the copied design's parameters keeps its value, in its unit; a text keeps its numbers. SketchClip::for_another_design prepares the clipboard; the app keeps the last sketch copy beside the cross-design body/component copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9293
* Assistant: a sign-in confirmed in one tab holds in every tab (#9293)
The latest sign-in evidence per agent is window state: keep it across
tab switches, new tabs and replaced designs instead of resetting it with
the tab's conversation, so a new tab no longer marks the agent as signed
out when discovery's login probe is older than the chat's proof.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9060
* Ribbon tooltips: help for the Sketch tools (#9060)
84 sketch commands get the two-sentence help under their tooltip, in
English, German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and
leave the backlog: every Create tool (lines, rectangles, circles, arcs,
slots, polygons, splines, conic, ellipse, text, points, the 3D sketch
tools, Project, Intersect and the other reference tools), every Modify
tool (Trim, Extend, Break, Offset, Fillet, the chamfers, Move, Scale,
Transform, Blend Curve), the patterns and Mirror, every constraint,
AutoConstrain, Sketch Dimension, Create/Edit/Finish/Cancel Sketch and
copy, cut and paste. The help tests use inspect.zebra as the
undocumented example, since sketch.trim has help now.
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dd8867414 jyviko: kernel: Extend grows a surface of several faces face by face
- 48a757827 jyviko: kernel: Split Body by a face of a smooth sheet cuts with the whole sheet
- 3421a8ef0 jyviko: Tests: a cylinder strip's run-offs are 100 pi + 100 to 1e-6, SMLib's exact area
- 20d5d8b13 jyviko: kernel: an extension SMLib cannot make exact says so, naming the length asked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.
edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The browser asks about every joint of the design on every frame, and
the answer walked the list of hidden joints: a nested STEP assembly
hides thousands of them, so a frame cost grew with the size of the
design.
Session keeps the hidden joints and folders as sets and answers from
them. The sets are built when the view changes and kept until it
changes again: the revision says the design changed, and the lists
say the view changed under it (the view is replaced outside the
engine too, without a revision of its own).
The behaviour is unchanged: the hidden joint stays hidden, the shown
one stays shown, and undo and redo keep the hiding right.
* claim: #9641
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: say why a drawing has nothing to import, and read UTF-16 files (#9641)
An SVG with nothing SolidCraft draws (only an embedded picture, shapes
pulled from another file with <use>, or not an SVG at all) was refused with
"invalid parameters for sketch.insert_svg: the drawing has no geometry
SolidCraft reads". It now names the file and says why, pointing pictures at
Insert Canvas and Canvas to Sketch. SVG files with a byte-order mark or in
UTF-16 now read, and a gzip-compressed (.svgz) file is refused clearly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert SVG: decode UTF-16 with as_chunks (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9041
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render: start the GPU path tracer setup only when the GPU image method is chosen (#9041)
Entering the Render workspace started the GPU path tracer setup even with
the default Raster image method. The setup compiles the path shader, which
some Vulkan drivers (Mesa RADV/ANV, NVIDIA) take gigabytes over: the memory
climb reported while orbiting in Render. The setup now starts only while
Render is open with the GPU path method.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9730
* Preferences: unapplied changes no longer reach the settings file while the dialog is open (#9730)
* Preferences: hold unapplied changes out of the settings file while the dialog is open
While prefs_window.snapshot is set, SolveApp::prefs() writes the snapshot's
values - the ones Cancel restores - so the periodic autosave, quit, window
close, web save and control channel can no longer persist a change that was
never applied. Apply re-baselines the snapshot; settings the dialog cannot
change keep saving live. Adds regression tests and updates the tests that
pinned the old behavior.
Fixes#9730
* prefs: bind the snapshot's shadow outside json! so the ui-containers guard reads it
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9686
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: joint.edit takes the two sides
joint.edit accepts a and b in the form joint.create takes them (read by the same origin_param), so a joint can move its attachment without being deleted. A side left out keeps its place. The two sides must stay on different occurrences, checked as joint.create does. Limits, values, expressions and the name are kept; a relation's values start again where its parts are.
joint.edit gets an input contract and reply type (schema/joints.rs), and leaves schema/unconverted.txt.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint shows both sides and picks them again
The Edit Joint dialog now shows the two sides in the same selection inputs as Joint, each pre-filled with the face or edge of its own component under the origin. OK sends joint.edit a or b only for a side picked again, so an untouched side keeps its origin exactly.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side turns the part as joint.create would
joint.edit kept the joint's old angle when a side changed, so the part could turn by a half turn about its axis when the new origin's x lay the other way. When a side moves and no angle is given, the angle is worked out again as joint.create does (the least turn from where the part is now); a relation's angle is its tilt and stays.
The mechanisms reference says joint.edit takes a and b.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: pre-fill sides by name, send the angle only when changed
A side shows the face or edge its snap names, the piece nearest its stored pick when the name has several, else the one nearest that pick; it no longer searches outward from the frame origin, which could show the plate beside a hole for the hole's wall. A point or frame side shows nothing. OK sends the angle only when the user changed it, so a side moved without it turns the part as joint.create would.
Co-Authored-By: Claude <noreply@anthropic.com>
* Edit Joint: a moved side leaves an angle expression alone (#9686)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9465
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)
The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.
A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8510
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: drag the labels away from the part (#8510)
The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9105
* Sketch: alignment guides from any hovered point while drawing (#9105)
While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9130
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: a Joints folder under each placement lists the joints that attach it (#9130)
Each component placement in the Browser gets a Joints folder (closed at
first) listing the joints whose Component 1 or Component 2 is that
placement, each beside the placement it joins it to. The rows are the
root folder's joints: click picks, the eye hides the glyph, double-click
edits and the menu is the joint's menu. The root Joints folder is
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: written to disk in the frame they change, not only at a clean exit (#8275)
eframe saves app.ron every 30 s and when the window closes normally. A
change made since the last save was lost whenever the app didn't close
normally: ended from the Task Manager, stopped by a sign-out or shutdown,
or crashed or hung in the graphics driver on the way out. The next start
then showed the old settings (View navigator back to Axes, Display quality
back to Normal).
The desktop app now writes its settings and flushes them in the frame they
change (frames with input and the one after), as the web app already does
(#8644). Unchanged settings are not written again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: write at most once a second, and only after input that can change them (#8275)
Review: pointer motion came in every frame while the mouse moved, so the
settings were serialized every frame; and some settings change in every frame
(a panel's width while its edge is dragged), which would have flushed app.ron
on the UI thread each frame. Only clicks, keys, text, paste, wheel and pinch
count as input now, and the file is written at most once per second: a change
made in between waits, a repaint is asked for when its second is over, and it
is written then, so an idle app still writes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9062
* Sketch drag: a line is never shrunk to a point to follow the cursor (#9062)
A line's end on a horizontal construction line through the origin, dragged
up off it, made the construction line vanish. A horizontal row is
b.y - a.y, which a line a hair long meets at any tilt, so the drag's held
solves met the point-on-line by shrinking the construction line: to 1e-5 mm
on the first frame, 1e-7 mm by the tenth, and the end went up.
A drag step (held solve, the tangent-ends-held solve, and each cursor
correction pose) that shrinks a line or circle from over 1e-3 to under
1e-4 now counts as failed, as a step that wraps an arc does. The end then
stays on the construction line, which keeps its length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9034
* Assistant: say when an installed agent can't start, and how to reinstall it (#9034)
An agent whose program is found but fails its `--version` check without
printing a version (npm's opencode.exe left as a placeholder when the
package's setup script did not run, which Windows refuses with "not
compatible with the version of Windows you're running") was listed like
a working one, and connecting only said "The agent stopped." with the
system's message.
Discovery now keeps why the program did not start: the spawn error
(Windows' `%1` replaced with the program) or, through a `.cmd` shim, the
first stderr line or the exit status. A probe that times out still says
nothing. The picker shows "Installed, but it does not start: ...", and
connecting first explains it with the agent's install command and Refresh.
The control channel status carries `problem`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9696
* Show an edited Free Move its stored turn as the X/Y/Z angles that remake it (#9696)
* cargo fmt
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9142
* Exploded View: grey it out until the design has two components (#9142)
On a part made of plain bodies (the sample plate) Exploded View opened its
dialog and failed on OK with "an exploded view needs two or more
occurrences". The command is now disabled until the design has two or more
occurrences, and its tooltip says why and which commands make components.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9624
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Control channel: document.inspect reports undo, redo and path in the app (#9624)
The app answers document.inspect on a scratch copy of the session, which
has no undo or redo history and no file path, so the reply always said
undo 0, redo 0, path null. Take those three values from the live session
and put them into the reply.
Fixes#9624
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #1044
* Continuous orbit turns about the Orbit around point (#1044)
With Orbit around set to the point under the cursor (or the origin), Continuous
orbit still turned about the view's centre. Cursor orbits move that centre off
the model, so the model swung across and out of the view while it spun. The
spin now turns about the origin, or the model point in the middle of the view
(else the middle of the bodies in view), held from start to stop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9457
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Keep the sketch pane still at fractional display scaling (#9457)
Right-docked cards were placed by their right edge from last frame's
measured width, which flipped by one physical pixel each frame at
scales such as 125 % in the Docked layout. Place them by their left
edge from the width they are held to instead.
Fixes#9457
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #9731
* Sketch Extend: only an end on a circle counts as held (#9731)
grow_line's on-circle test was true for every point inside the circle; test distance to the circle instead. Also pin the new end point of a held-end extension onto the curve it stops on, as the free-end path does.
* Fix regression test harness usage and held-end setup (#9731)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
construction_visible checked the item's own hide and its folder, but not
the placement its component is drawn at, so hiding Part:1 left Part's
planes, axes and points on screen. It now asks feature_placement_visible,
the check sketches already made; the placement path is computed in one
place for both.
* Arabic: colour key wording in the viewport analysis status help
* Arabic: tanween and direction-neutral wording in the browser eye position note
* Arabic: outline wording and no direction mark in the print face highlight tip
* Arabic: sketch term in the constraint glyph note
* Arabic: checkbox wording and discard verb in the parameters apply-live option
* claim: #9680
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: drag over the eyes to show or hide many rows at once (#9680)
Press an eye and drag up or down over other eyes: each eye the pointer passes
takes the first eye's new state (shown or hidden), and the whole drag is one
undo step. A plain click is unchanged. Dragging near the list's top or bottom
edge scrolls it. A component's eye now goes through browser.visibility, so it
is undoable like a body's.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: fix the eye drag's undo merge and layering (#9680)
Merge the drag's steps from the undo depth noted at press, when the design
and visibility still match, instead of searching the history. Run the merge
every frame from logic(), so a release under an overlay is never missed. An
eye under a popup or tooltip no longer takes part in the drag. Adds a
regression test for a drag from the Origin's eye after a show.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: say when the eye drag's undo merge gives up (#9680)
Co-Authored-By: Claude <noreply@anthropic.com>
* Gallery test: the eye-drag state key is not a renderable element
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5bb43bdb1 jyviko: CI: the test jobs grade their junit against tests/KNOWN_FAILING_TESTS
- d23c37027 jyviko: Tests: the known-failing list takes develop's 10 failing tests
- e18fb40d8 jyviko: Reference tests: the eight cases that fail on SMLib eaa998a name their cause as known failures
- 9b58a5170 jyviko: Sweep path: a curve of several pieces is turned round whole
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9060
* Ribbon tooltips: help for the Assemble and Insert tools and the Create primitives (#9060)
56 commands get the two-sentence help under their tooltip, in English,
German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and leave the
backlog: every Assemble tool (components, joints, contact, motion,
position), every Insert tool (files, images, 2D, library, links) and the
Model > Create drop-down primitives (box, cylinder, sphere, torus, cone,
coil, pipe, thread, rib, web, emboss, boundary fill, bounding solid).
Their drop-down rows now show a tooltip as well. The help tests use
sketch.trim as the undocumented example, since solid.rib has help now.
* claim: #2153
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Zebra: flat faces keep one stripe colour while the view turns (#2153)
A face whose normal lies in the upright plane through the view (every
horizontal face) reflects straight ahead, where the zebra's sideways
coordinate is zero: exactly on the edge between a black and a white
stripe. Rounding then picked one or the other from frame to frame, so
the face flickered while the camera orbited. Straight ahead is now white.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c19500fce jyviko: Fillet: the radius-too-large choice in plain nouns
- b75d17667 jyviko: kernel: a round that would cut through its wall into a hollow is refused
- 795394417 jyviko: Fillet rig: 1668's R7 past the inside corner is refused at 4 + 2 sqrt2
- a26d3ee41 jyviko: xtask: known-failing grades a nextest junit report against tests/KNOWN_FAILING_TESTS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 62fe29dbd jyviko: Fillet rig: the cases SMLib 737c392 builds come off the known-failing list
- 571d711c8 jyviko: kernel: the re-blend's removed picks formatted as rustfmt lays them out
- 2fab94991 jyviko: kernel: blend_smlib laid out by the 2024 edition's rustfmt
- 38fd4a4f6 jyviko: Skills: the tests skill's unit-test example stays under the 3600-character limit
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
Fold the pending design format changes (browser-nested-groups, point-cloud-properties, print-faces) into format 45.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9741
* motion.list gives study keys in motion.study units
Angle keys came back in radians while motion.study takes degrees, so an
agent that listed a study and wrote it back changed every angle by a
factor of 57.3, silently. Convert key values on the way out like
joint.list does (degrees for angles, mm for distances), give each key a
unit and its joint's name, and add a round-trip regression test.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9407
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section caps: a body touching another along a curved face keeps its own cap (#9407)
Seen through a cut, a far wall and another body's face lying on it (a shaft
in its bore, a ring in its housing) are the same surface faceted two ways, so
the marking pass let the other body's face win in streaks. The section's
passes now first count the faces behind the cut in the stencil (back +1,
front -1): where the count says the cut runs through a body but a front face
won, the back faces are drawn again pulled toward the eye by a few pixels and
take the cap back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9279
* Parameters: an option to hold edits until Apply or OK (#9279)
"Apply each change as you leave its field" (on by default, remembered in
the preferences as parameters_apply_live). Off: an expression edit is
checked when its field is left but waits, without a preview; Apply or OK
sets every held edit in one parameters.change {changes}, so the design
rebuilds once and one undo takes them back. Cancel, the close button and
Escape drop them. Turning the option back on applies what waits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the parameters_apply_live preference in ui.prefs (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the hint says edits wait for Apply or OK when they do (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the remaining CPU lighting and
reflection controls, render diagnostics, lens and film effects, GPU path
tracer options, HDR source details, the resource library and the raw
linear EXR options.
* claim: #9144
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DXF export: the full release 2000 file structure strict readers need (#9144)
The view and flat pattern DXF left out parts of the AC1015 file that a
strict reader expects: the CLASSES section, the VPORT, VIEW, UCS, APPID
and DIMSTYLE tables (with *Active, ACAD and Standard) and the ACAD_GROUP
dictionary under the root dictionary. They are written now, along with
$DWGCODEPAGE; the active viewport looks at the whole drawing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8776
* Crash reports: a window opened after startup no longer labels the run "during startup" (#8776)
egui-wgpu reports "window surface" and "surface configure" for every native
window, also the ones opened after startup, such as the agent chat in its own
window. Each one overwrote the journal's "running" phase, so a later unclean
exit was reported as "during startup (surface configure, N s after launch)".
crash::startup_step records a startup step only until the app runs, and the
app's egui-wgpu hook calls it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Browser: the recover-unsaved-work card always shows Recover and Discard
A window's scrolling body was only offered the height the card had the
frame before. A card first laid out while the page was still tiny (a
browser canvas not sized yet) kept a body of no height for good, so only
its title showed and the required choice could not be made. The body is
now offered the room the screen leaves and shrinks to its content, which
also covers the desktop recovery card and every other system window.
Fixes#9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the quick measurement, a few
Preferences labels and a large part of the Render panel (adaptive
sampling, surface aging, camera background, CPU lighting and environment).
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cdff4ac7c jyviko: engine tests: probes ask for the exact point class
- 7ca072ec6 jyviko: ui, cli tests: probes ask for the exact point class
- a85d22e60 jyviko: kernel: Body::contains, the mesh test, is gone
- baf51b271 jyviko: kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* feat(browser): reorder features by dragging rows of the History in the browser
Let users drag features in the History shown in the browser to move them, with the same drop bar and checks as the History at the left, while the rollback marker still drags on its own.
refs: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Add Finnish (fi) UI localization (#9626)
A fi catalog ("Suomi") translated from en.json, all 4801 messages,
registered in LOCALES between es and fr, with
finnish_catalog_is_registered_and_translates_keys, the language listed
in docs/localization.md (registered and partial) with its terms, and a
pending attribution row.
Fixes#9626
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Finnish: the 3D mouse Restore defaults button gets its own label
It shared its text with Restore defaults elsewhere on the page, so the layout test found
the wrong button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Janiz-zzz <267742026+Janiz-zzz@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9492
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* fix(viewport): keep running when the view area comes out inside out
Make the layout beside the docked Assistant give way instead of closing the app when a window reconfigure leaves the view area inverted.
refs: #9492
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #3305
* fix(agent-chat): support ACP configuration options (#3305)
Handle current select options for model, thinking effort and mode, with confirmed snapshots and legacy compatibility. Full quality gate attempted; draft delivery authorized with unrelated geometry/property/timing failures documented in PR #3867.
* fix(agent-chat): keep configuration selectors inline (#3305)
Use compact value pickers and bounded wrapping to preserve conversation space; verified at normal and narrow widths with the installed OpenCode V2 server.
* style(agent-chat): format tool events
* claim: #9358
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the expression field opens wide while you edit it (#9358)
A parameter's expression that is too long for its cell opens over the
cells to its right while it has focus, wraps instead of scrolling, and
shows the live value or error under it. Enter still applies it and the
field returns to its column; a short expression stays in its cell. The
add row's expression field does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On a loaded runner the hover alone has taken 70 ms against a 190 ms index, which failed
unrelated pull requests. Waiting for the index would still cost all of it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6106
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Extrude: a sketch picked in the Browser or History takes all its profiles (#6106)
With Extrude, Revolve or Emboss open, a plain click on a sketch row in the
Browser or on a sketch in the History now fills Profiles with every profile of
that sketch (the island inside another profile's hole is left out). Before, the
click only changed the selection, which the dialog never reads.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #2227
* 3D mouse: optional orbit while a sketch is open (#2227)
A new Navigation preference, "Turn sketches with the 3D mouse"
(space_mouse_sketch_orbit, off by default), lets the cap and a device
app turn the view while a sketch is open and seen square on, as the
mouse already can. Off keeps today's behaviour: pan and zoom until the
view is tilted away from the sketch (#6687). Restore defaults on the
3D mouse section resets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: keep the settings list in order after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9495
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: say when a reply hit its length limit or was declined, not that the model lacks tools (#9495)
The API client never read why an answer stopped, so a Claude reply cut
off at max_tokens while thinking (its thinking text is empty by default),
or a refusal, ended the turn as normal with nothing said. The chat then
blamed tool support: "The model didn't use SolidCraft's tools".
Reply now carries the stop reason: Anthropic stop_reason max_tokens and
refusal, or OpenAI finish_reason length and content_filter and a message
refusal. Any other value is a normal end. The turn ends with that reason,
which already keeps the tool-calling notice away, and the chat shows
what happened in place of the raw "(max_tokens)", for ACP agents too. A
tool call cut off at the length limit has incomplete input, so it is
neither run nor kept in the history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: each dropdown option shows the hole it makes while hovered
Extents, Hole Type, Hole Tap Type and Drill Point list names only, so seeing
what an option makes meant picking it. Hovering an option now shows a small
section of that hole beside the list, drawn by the dialog's own section
painter from a copy of the form with the option applied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhpMr6L9PR8SJXjM6MbQrD
* Hole: give the dropdown previews a gallery entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: danieldimitrov86 <danieldimitrovdev@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
While Frame shows the picture's frame, the preview projects into that frame
rather than the viewport, but Fit Product and the fit on entering Render
framed the product for the viewport's free area, so a picture taller than
wide cut the product at its sides. The fit now uses the viewport layout
seen from the frame (the frame as the viewport, the free area inside it
with the usual 16-point margin).
Entering Render fitted before the saved setup replaced the draft, so a cold
workspace with a portrait setup fitted for the old draft's aspect; the fit
now runs once the setup in effect is loaded.
render.camera.fit takes the picture's aspect (0.000001 to 1000000) through
Camera::fit_aspect, which publishes only a valid fitted camera: an aspect
that would divide the distance into infinity is refused and the previous
camera, document and undo stay as they were.
* Claim #9479
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: an option to keep value boxes out of the view (#9479)
Design > "Show values beside their handles in the view", on by default.
Off, a command's value box (Extrude's Distance, Fillet's Radius, a hole's
reference distances...) isn't drawn over the model; the command window's
value field takes the keyboard that opening the window or a pick gives the
box, its text selected, so a number typed after a pick still sets it. The
handles stay and still drag the value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: the value box option in Arabic, Hebrew and Vietnamese too (#9479)
The complete catalogs must carry every English message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8941
* Render: a size the CPU methods refuse names the profile that renders it (#8941)
The Shots strip offers 4K UHD whatever the method. Under the default CPU
raster, and under CPU ray tracing's default Compact profile, Render was then
refused with English engine text that didn't say how to render that size.
The refusal is now translated and names the smallest CPU resource profile that
admits the size (with CPU ray tracing, for raster, which has no profiles). The
size lists mark such presets. Nothing is switched: method, profile and
resolution still change only when chosen, and GPU path tracing is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8563
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: sort each section by name (#8563)
The Name heading of every Parameters table steps through A to Z, Z to A and the
listed order. Each section sorts on its own: Favorites, User Parameters and each
model group (the groups keep the design's order). Names compare in natural order
(d2 before d10, letters ignoring case). The choice is kept in egui's persisted
memory like a section's open state. While sorted, a user parameter's move arrows
are disabled. The sortable heading and natural_cmp live in ui_kit::table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters sort: gallery entry for the sortable heading, natural_cmp private
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: nest groups and reorder components
Groups can hold other groups (up to 8 levels) and be reordered with the
items around them. Sub-components can be reordered too, through a new
`components` list in `browser_order` that is not drawn as a folder.
Document: `BrowserGroup` gains `parent`; group items and `browser_order`
lists hold `BrowserEntry` values (a number is a group, a string an item).
One pending format file; older designs read unchanged. Loading and
refreshing drop what the lists name that is gone, and cut cycles and
over-deep nesting to the top level.
Engine: `browser.group` takes `parent`; `browser.move`, `browser.order`
and `browser.ungroup` handle groups. A change to only the browser's
groups and order no longer re-evaluates the model.
UI: nested rows, dragging a group row (top of a row: before it, the rest:
into it), New Group inside a group, and dropping a placement on the top
of a sibling to reorder it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fixed formatting
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fixed unintended side effect in render scene browser test
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Preserve group order in render workspace
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Increased test coverage
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Updated clipboard test from upstream main for group item type
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 20c0c2ffc jyviko: Kernel rig: a sloped basin's mitred rim rounds are checked tangent along their contact lines
- 56d39a576 jyviko: smlib: Brep::classify_point says exactly where a point lies against a body
- 7b3e66cba jyviko: kernel: Body::classify_point decides inside, outside or on the boundary exactly
- 3b88f1acc jyviko: doc: a hole decides whether it exits at its drill point's shoulder exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9281
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: a number parameter in the words shows its value (#9281)
A text's words expression can now name a number parameter: `'W' + Width`
reads "W85 mm" (lengths in the design's units, angles in degrees, up to
three decimals). `number(Width)` drops the unit and `number(Width, 2)`
fixes the decimals. The words and the cut follow a parameter edit in the
same rebuild, a rename reaches inside number(), and deleting the parameter
is refused while a text shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: a Text starting with = builds its words from parameters (#9281)
In Edit Text, a Text that starts with = is the words' expression
(='W' + number(Width)): OK keeps it, the dialog shows it again with its =,
and an untouched OK no longer turns it into typed words. Typed words still
replace it, and a saved text that happens to start with = stays typed
until it is edited. The field's tooltip says how.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: the formula hint in every complete catalog (#9281)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9246
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Down arrow in an empty field lists every named parameter (#9246)
In an empty expression field, Down opens the completion list with every
named parameter (not just the first eight), armed on the first one; Up and
Down walk it, the list scrolls to keep the chosen row in view, and Enter
inserts it. A field that already holds text keeps Down for itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Preferences caps the Down-arrow parameter list (#9246)
Down arrow in an empty field lists the parameters up to "Parameters
listed by Down arrow" in Preferences > Design (default 50, 5 to 200),
favourites and the design's own parameters first, so a large design
does not build a list of hundreds of rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: a label that fits for the parameter list cap (#9246)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: the parameter list cap in every complete catalog (#9246)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
After a lost device the next start began from on_exit, while eframe was
still writing app.ron, and the old process then hung in
vkDestroySwapchainKHR on NVIDIA. Start it from Drop for App instead, after
eframe has joined the settings save and before it drops the window's GPU
surface, and end the process there after a loss. The update restart moves
there too. The loss reason is passed to the next start and shown in its
note.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The test asserted the readout was still empty right after the first poll, but the measuring thread can finish first, so it failed now and then in merge groups and on unrelated pull requests. It now asserts only that the measurement arrives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Everything en.json gained since the last catch-up except the render.*
messages: Preferences, navigation bar, assistant settings, materials,
hole presets, joint move, edit in place, point clouds, view angles,
tool help texts and error hints. Added as one pending locale file.
* Sketch: the coordinate readout starts right of the pointer arrow (#9480)
The readout of a sketch tool's point (2D and 3D sketches) started 10
points below and right of the snapped point, under the system arrow,
which hangs about 12 points wide below the hot spot and covered the
first value. It now starts 18 points right and 10 below the pointer
(the point snaps away from it), from the snapped point only when there
is no pointer over the view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the readout clears the next larger pointer too (#9480)
The reporter uses the system's pointer size 2, whose arrow is about
18 × 28 points: start the readout 26 points right of the hot spot
instead of 18, and test against that arrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The clamp that crashed #9492 (f32::clamp between a view's edges, which
panics once the view comes out inside out) also sits in the room tool
windows get beside the docked Assistant, the Render selection bar's
anchor and a left-anchored panel's anchor. Use shell::within there,
the clamp that gives the lower edge for an empty range (#9271).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6f0bf0dea jyviko: Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
- 3772a6e97 jyviko: kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
- 9308224ef jyviko: Fillet rig: the knife edge's 0.5 chamfer builds
- 58e0d8346 jyviko: Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 04955683f jyviko: Tests: a strip's tangent and curvature run-offs are the distance long across the surface
- 4f64a035a jyviko: kernel: one smooth angle, and a round too small to change the part is refused
- c23ef9d93 jyviko: Fillet rig: the knife-edge chamfers name SMLib's cause, a cusp's ball radius of 0
- 6f7172dc8 jyviko: kernel tests: a corner round wider than its faces overflows and takes the corner's other edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9760feed4 jyviko: Kernel: a body's record of rounds goes with its history, and can be read back
- f3cf0c4f3 jyviko: Model cache: a body made by rounds keeps them, so a later round blends them the same after opening
- 134a34f89 jyviko: Tests: a corner patch of rounds 2/3/4 takes no more than the strips leave in its block
- 456e5b7fa jyviko: Tests: the io crate's hand-built saved models list their rounds, as format 7 records do
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8ed4663ae jyviko: Mesh convert: a reconstructed bore is one wall, so the bracket has 9 faces
- 6d8e002f8 jyviko: UI: rim and wall picking tests for a circle of arcs that is one wall
- 3e5b358af jyviko: Fillets: a later round at a corner where earlier rounds meet blends them again with it
- 5d1b18f40 jyviko: Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ae53d387 jyviko: Preferences: metric tapped holes drill only the tap maker's drill
- a71450aeb jyviko: Preferences: symmetric surface extrudes read only the total distance
- 26b42048c jyviko: Preferences: the Body check note says each option in one short line
- 2c1901371 jyviko: kernel: the record test takes the one wall a circle of arcs extrudes to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 709765fca jyviko: Model cache: a saved model records its body check mode and is adopted under it
- 393c83c2a jyviko: STEP import: a solid the kernel refuses, its faces too, is refused with the reason, never a mesh
- 6700e6ef1 jyviko: kernel: a body SMLib keeps in the record's order is mapped, whatever order its export lists
- 222211de4 jyviko: Model cache: a thinned model keeps the check mode only as the model records it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9081
Co-authored-by: Cursor <cursoragent@cursor.com>
* Tell same-named recent designs apart (#9081)
Show the file name with extension, ellipsize long paths in the middle so the end stays visible, and label imports by kind (STEP, STL, …) instead of always Design.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Start: Recent paths take their ink from the theme, and the middle-ellipsis helper is exported for tests only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9170
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Model cache: a design with mesh bodies keeps its saved model (#9170)
One mesh body (an inserted STL or 3MF, or a STEP part shown as a mesh of
its faces) left the model cache out for the whole design, so opening it
evaluated every feature again. The doc records refused mesh bodies, and
the native B-rep codec the io cache stores bodies with refuses them too.
Kernel work is paused, so the kernel is left alone: the io cache stores a
mesh body as its own slice kind (SCMESH01, a JSON header with the counts,
colour and paint, then the vertices as f64 and triangles as u32), read
back through mesh_body, with_color and with_paint. A mesh body is kept
only when its slice reads back as the same vertices bit for bit, the same
triangles, colour and paint. The decoder checks the counts against the
bytes before allocating. The picture shown while opening draws a mesh
body with its own triangles (native_preview_mesh refuses mesh bodies).
Cache version 4 -> 5; docs/design-container.md describes the mesh slice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Model cache: decode mesh slices with as_chunks, as clippy asks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9417
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: drop earlier thinking blocks when history is trimmed (#9417)
Claude signs each thinking block against the conversation before it. Once
drop_old_views swaps an older view for a note, or trim_history drops the
oldest messages, every later block stops matching and the API refuses the
request with HTTP 400 "Invalid signature in thinking block". For the
Anthropic protocol, a trim now also removes the thinking and
redacted_thinking blocks from earlier replies, which the API allows. A
reply that was only thinking keeps a short note. Requests where nothing
was trimmed are sent unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e43fe1ab0 jyviko: Kernel rig: diagnostics.validation is a setting, exempt from cases
- b24d90269 jyviko: doc, ui: a feature that lost a reference asks for it to be picked again
- d62d248b7 jyviko: doc: Untrim's face points pick faces of the body it untrims
- 1b08d4b8b jyviko: doc: a feature's face points are named on its own component's bodies first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9324
* Sketch: Project takes a construction axis, not only X, Y and Z (#9324)
sketch.project with {"axis": "Axis1"} upper-cased the name, and the axis link knew only the
origin axes, so a construction axis failed with "unknown axis `AXIS1`". X, Y and Z (any case)
are still the origin axes; any other name must be a construction axis, kept as its feature names
it. The link finds the axis where the timeline before the sketch puts it (construction_axis_in,
as Revolve does) and projects it as an origin axis: its line in the sketch plane, or a point
when the axis stands square to it. Renaming the axis renames the link, as for a construction
plane's projection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8398
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Closing: stop the Home picture builds instead of waiting for them (#8398)
Dropping SolveApp waited up to 10 s for the Home picture threads to end
(#6063). The thumbnails thread imports and rebuilds every cold recent
file (STEP and mesh imports, designs without a stored picture) one after
another, and its channel only closes once all are done, so closing the
window froze until every cold recent was built or the 10 s ran out.
The picture threads now build under a shared progress watch that
finish_pictures cancels first: the design being built stops at its next
feature (a STEP import at its next step), the remaining cold files are
skipped, and a build stopped part way draws and caches no picture.
Pictures already on the GPU are still waited for, so the driver crash
#6063 fixed stays fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Quick measurement: the selection's length, area or distance in the view's corner (#7000)
With edges, faces, sketch curves or points selected, the view's bottom right corner above History
shows what they measure, as the Measure tool lists it: an edge's length (Ø and R for a round
one), a face's area, a point's position; two items' distance and angle; several edges' or faces'
count and total. It is computed off the window thread from a copy of the session whenever the
selection or the design changes, and a click copies it. Preferences > Interface turns it off. The
Measure dialog's rows come from the same function.
* Quick measurement: off by default, turned on under Preferences > Interface (#7000)
The quick_measure preference now defaults to false, so nothing changes until it is turned on.
Its tests turn it on, and a new test checks that nothing shows until it is.
* claim: #8315
* fix(control-server): release the watch seat deterministically (#8315)
The seat a subscribed connection holds on the DesignWatch lived in the
events thread alone, so it left the watch only when that thread ended:
on the first write a closed client refuses, which needs the design to
move, or when the thread noticed the end of the stream, which waits for
the connection's own thread to come out of its blocking read. A closed
connection could therefore keep counting on the watch for a second or
more, and the test that asks for the count to be gone could lose its
race with the ten seconds it waits.
The seat is now shared: it leaves the watch once, whichever thread sees
the connection's end first, the connection's own thread at the end of
the stream or the events thread at the first refused write. The count
of subscribed connections is right as soon as the connection is gone,
and the events a subscribed connection is told of do not change.
* claim: #6262
* Inspect Sketch: the ribbon button opens a Sketch report window (#6262)
sketch.inspect gets a place on the Sketch tab (Inspect panel). ui.start opens a
read-only Sketch report: solver status, degrees of freedom left, counts of
curves, points, constraints and profiles, the curves and points that are not
fully constrained, and Copy JSON. engine.execute still only returns the JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Inspect Sketch: a Sketch Report button on the Sketch tab while a sketch is open (#6262)
SKETCH/INSPECT placed it in the Inspect tab's Surface Quality drop-down, which
is hidden while a sketch is edited. It now has its own Inspect panel on the
Sketch tab, labelled Sketch Report; the test clicks the ribbon button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Report: strings in a pending locale file, help for sketch.inspect (#6262)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Report: the Sketch tab fits at 1366 px; the width test closes the report (#6262)
The panels left of the Finish group keep the gap before it when they are fitted,
so they collapse before they reach it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Frank <plexi32@gmail.com>
Opening a DWG stopped with "design file is not UTF-8 JSON". It is told
apart by its signature, whatever the file is called, and the error points
to STEP or DXF.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9001
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a projected face follows a resize that moves its corners far (#9001)
A sketch on the face of an angle kept its projected face boundary (and
reported "projected face boundary identity is ambiguous") when the wall
thickness changed: the inner corner moved by more than a tenth of the face,
past the nearest-point match, and the same-order fallback refused faces.
Accept the same-order layout when, for every point, the point read in that
order is also clearly the nearest one on the same loop with lines the same
way. Rims and holes, and rotated readings of a rectangle, stay refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5d80fc571 jyviko: Engine: diagnostics.validation reads and sets the mode
- 1a93a3977 jyviko: CLI: run and kernel-cases take the validation mode
- 50501fe14 jyviko: Preferences: Body check, once per feature by default
- 6a133042c jyviko: Preferences: the body check is the kernel's, not named after SMLib
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9341
* Insert Part: seat a fastener in several holes at once (#9341)
parts.insert / parts.fastener take `at` as one pick or a list of picks.
The part is built once as one component; each hole gets its own
placement and rigid seat joint. All placements are made before any is
seated, since joint.create takes the part's seating point where the
placement is. The insert now runs on a scratch session like
parts.resize, so it is one undo step, and a pick off every body fails
it before anything is made.
The Insert Part dialog's hole input is multi-select ("Holes
(optional)") and OK passes every pick.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: picks on one hole's rim seat one part (#9341)
A hole's rim is drawn as two half-circle edges, and one click on it
picks both, so four clicks gave eight picks and two screws per hole.
Picks whose wall point lies level on the same hole axis, on the same
body placement, are one hole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9297
* Assistant on Windows: find Node in its install folder when the launcher's PATH lacks it (#9297)
An npm-installed agent starts on Windows through its .cmd shim, which runs `node`, with the PATH
search_dirs makes: SolidCraft's own PATH, then npm's and other installers' folders. Node's own
install folder was not among them, so started from a launcher that leaves it off the PATH (the
ArtCraft launcher), the agent stopped with "'node' is not recognized". The search now also takes
%ProgramFiles%\nodejs, %ProgramFiles(x86)%\nodejs and nvm-windows' %NVM_SYMLINK%, after
everything it took before. search_dirs reads its variables through search_dirs_in, so a test can
give it a launcher's environment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)
A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.
In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.
pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)
A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7971
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: a close (×) with a countdown ring instead of a Close button (#7971)
Every toast the user may close (the status, the 3D mouse offer and the
stand-up note) has a close (×) at its top right, handle toast:<name>:close,
in place of a Close button; it does what the button did, is a kit-drawn
button with an accessible name and hover text, reachable by Tab, and dead
behind an issue report. Toasts that go by themselves draw a thin ring
around it that shrinks over their time; pointing at the offer or the note
starts their time again, as before, so their ring is full while pointed at.
The 3D mouse offer keeps three buttons, Calibrate…, Use Direct Driver (the
detail in its tooltip) and Never show again, on one row: the corner
toasts are 400 points wide, as the row's estimated widths need 356.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: lay buttons out at their drawn widths; corner toasts 360 wide (#7971)
The toast's button rows used an estimate of each button's width that ran
about 40 points over the kit button as drawn, which wrapped the 3D mouse
offer's three buttons and left the main action short of the right edge.
Each button's drawn width is now remembered and the rows laid out with it
(the estimate stands in for the one frame before a button was first
drawn), so the main action is flush right; the corner width is the
smallest round one that fits the offer's three buttons in a row: 360.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: keep the analysis status test whole after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
On Macs patched with OpenCore Legacy Patcher the OS reports a newer
macOS version than the GPU's Metal compiler supports, so wgpu picks a
shader standard the compiler refuses (`invalid value 'metal3.2'`) and
the window never draws.
The variable has to be set before the process starts, and Rust 2024
makes `set_var` unsafe (this crate denies unsafe code), so main()
now re-launches the binary with SYSTEM_VERSION_COMPAT=1 when the OCLP
NVRAM key (OCLP-Version) is present, and exits with the child's status.
A process that already has the variable set never re-launches, so
there is no loop and a user's own value is respected. If the check or
the spawn fails, startup continues normally.
Tested on an OCLP Mac: one re-launch message, graphics render
correctly; with SYSTEM_VERSION_COMPAT=1 set beforehand it does not
re-launch.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Help: add manual update checks and status window
* Test manual update checks and localized results
* Add update check to the native Help menu
* Localize Help update checks in all app languages
* Document manual update checks from Help
* Document ui.help updates control action
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 292ec65c8 jyviko: Fillet rig: the chamfer running into the openings is named for what it does
- 051a7b714 jyviko: Kernel tests: rustfmt
- 4030b795c jyviko: Kernel: a validation mode decides when sweeps, booleans and blends are checked
- 9acbcf924 jyviko: Evaluation: under each_feature a feature's kept bodies are checked once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b4af45dd0 jyviko: Kernel rig: the horn torus and the circle revolved touching its axis build
- f1199f89b jyviko: Joint drive: contact is decided on the exact bodies, not their display meshes
- 3a2fac31a jyviko: Kernel tests, fillet rig: a chamfer as wide as its rim builds
- 1878274cb jyviko: Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e46359ff0 jyviko: Kernel rig: the patch cases the fill now builds come off the known-failing lists
- 7c9e5ec69 jyviko: kernel: a seam held as two edges is one join, drawn whole in the shaded view
- 12496c2c1 jyviko: Tests: a round flange stays an exact circle through unfold, refold and DXF, with a cut near its rim
- 7fe880a7b jyviko: SMLib: pin f8fd83e (tangency-labs/smlib#66)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #7535
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vendor accesskit_macos 0.26.3 as published (#7535)
The published package, unchanged, so the next commit shows the fix as a diff.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* macOS: quitting on a Mac with a Touch Bar no longer crashes (#7535)
eframe's accessibility adapter (accesskit_macos 0.26.3) swaps the window's
view to a subclass of its own. When AppKit's Touch Bar observes the first
responder (nextResponder), key-value observing subclasses the view again.
Dropping the adapter on quit reset the view's class, which threw away KVO's
subclass, so AppKit's removal of its observer raised NSRangeException ("not
registered as an observer") and the app ended with EXC_BREAKPOINT.
accesskit_macos 0.27.2 fixes this (AccessKit/accesskit#835), but egui 0.36
is on accesskit 0.24, so vendor 0.26.3 with 0.27.2's src/subclass.rs and its
tests: the adapter leaves the class alone when KVO subclassed the view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8894
Co-authored-by: Cursor <cursoragent@cursor.com>
* Web: load Simplified/Traditional Chinese fonts for zh and zh-TW (#8894)
BIZ UDPGothic only covers Japanese, so Chinese UI showed tofu. Ship locale-glyph Craft UI SC/TC subsets and fetch the matching face on demand.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #8980
Hide constraint glyphs when zoomed out (claim).
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Sketch: hide constraint glyphs when zoomed out (#8980)
Fixed-size constraint glyphs stayed visible at every zoom and cluttered the
view when far out. Hide them below a sketch-plane scale threshold, with the
old always-on behaviour behind hide_constraint_glyphs_zoomed_out.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* i18n: complete-catalog strings for zoom-hide preference (#8980)
Add ar/he/vi translations for prefs.hide_constraint_glyphs_zoomed_out
(and its note) so cargo xtask i18n --check no longer reports 6 gaps in
complete catalogs.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
Native compilers inline every call, and `main` inlined 33 BVH walks: three
sample_path calls, and a shadow walk per light source family. NVIDIA's
compiler (driver 610.88) crashed in nvgpucomp64.dll or ran out of memory.
- main settles the adaptive budget first, then samples at one call site.
- direct_light takes over direct_studio, visible and the fixed-light loop:
one loop over the sources with one shadow-ray call site, drawing random
numbers in the same order.
- next_vertex (a select) replaces (a+1u)%3u: after a BVH walk that index
crashed NVIDIA's compiler within seconds.
main now inlines 5 BVH walks; main_inlines_few_bvh_walks counts them with
naga, so the limit holds without an NVIDIA GPU.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Problem: every state of a saved model wrote the evaluation key of each sketch before it, so a
design of many sketches and many features after them repeated the same map over and over. In
the SELENE rover (5,484 features, 2,116 bodies) that was 27 of the 33.5 MB manifest: the
manifest hit its 32 MiB limit, the save thinned the cache (#3220) to 2,140 of 5,484 states, and
every open evaluated the 3,344 left-out features again. Reading the kept states one after
another took a few seconds more.
Solution: as for sheet bodies (#6152), the records keep a list of sketch-key sets, each distinct
set written once, as the keys it sets and drops relative to the set written before it; a state
names its set by place. A thinned model keeps the whole list and counts it once against its
budget. The reader counts every set's keys, and each state's, towards MAX_HELD before it copies
them (a short record can stand for a large set), then builds the states on threads
(kernel::map_on_threads) once the shared records are read. The cache format is now /5: an older
cache is a miss and the design is evaluated.
SELENE's manifest is 15.9 MB with every state kept; opening it evaluates nothing. Parse and
evaluate on opening, release build, median of 5 on a shared machine: 7.36 s -> 1.14 s. The
evaluated bodies are identical (inspect.measure of all 2,116 bodies).
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
* claim: #5574
* Pick hidden geometry near long clicks in a five-row list (#5574)
* fix: make Select Other configurable and fit its list to the window
---------
Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
* claim: #7168
* Saved model cache: keep fast opening after an update (#7168)
The model cache was read only by the exact build that wrote it (same app
version and commit), so every update evaluated every design again on its
first open. It is now keyed by the evaluation source instead: a digest of
the committed source the model is computed from (doc and the workspace
crates it is built from, the patched truck crates, locked external
dependencies, workspace build settings without the version, and the
cache reader), with the platform. An update that changed none of that
opens designs from their cache; one that changed any of it evaluates
them again, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7944
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Theme: System follows the desktop's dark/light setting on Linux (#7944)
On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8429
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: Send to Slicer lays a body on its marked face (#8429)
A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)
Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: a light tint in the viewport and its strength in Preferences (#8429)
Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9118
* Agent chat window: an off-screen chat window no longer stalls the main window (#9118)
The chat popped out into its own window is an immediate viewport: eframe draws
and presents it inside the main window's frame. Both surfaces waited for vsync,
and a Wayland compositor sends no frame callbacks to a window it isn't showing,
so the main window stalled behind the chat window's present.
A surface other than the main window's is now configured with Mailbox, else
Immediate, when the configured mode waits for vsync and the surface offers one
(viewport_present_mode in the vendored egui-wgpu). The main window keeps vsync
and still paces both.
* claim: #8718
* Browser: the eye sits in a column at each row's right end (#8718)
Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.
* Docs: the browser's eye column and browser_eye_left (#8718)
* Browser: the eye's tip shows by the eye at the row's end (#8718)
* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)
The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.
* Tests: browser depth checks run on the default layout, by indent handles (#8718)
* claim: #8993
* Reverse zoom direction no longer flips 3D mouse zoom (#8993)
The checkbox sits under Wheel and trackpad and now reverses the wheel
(and the navigation bridge's wheel-style steps) only. The 3D mouse cap
zooms by its own per-axis invert switch alone: device_camera no longer
takes a reverse_zoom argument, nor does the test model in Preferences.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8390
* Sketch modify: pick a whole profile or chain for the shared Entities input (#8390)
- Click inside a closed profile selects its whole boundary (and its holes);
double-click a curve selects its whole chain, for Mirror, Move/Copy, Scale
and the patterns. Single curves and points keep working as before.
- The mirror line may itself be among the entities: the command leaves the
line in place and mirrors the rest, instead of rejecting it.
* Mirror: the shared line case is valid, not an error (#8390)
Update the half-filled-window test: a mirror line that is also among the
entities is now accepted (the command leaves it in place and mirrors the
rest), matching the engine.
---------
Co-authored-by: Dane Doubell <2853036+danedoubell@users.noreply.github.com>
* claim: #8908
Co-authored-by: Cursor <cursoragent@cursor.com>
* Update Cancel clears the UI and stops before checksum downloads.
Drop the install job as soon as Cancel is pressed so Downloading ends
immediately, and check the cancel flag around feed refresh and
checksum GETs so a stall before the package body no longer ignores it.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* Assistant composer: the input box fills its area, and the hint stays on one line
The composer footer inset the box by its own margin on top of the box's text
padding. The footer now has no margin, so the box spans it on all four sides and
only the text padding remains. The hint is painted on a single row, cut with an
ellipsis when the panel is narrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant composer: the hint takes its colour from the theme, not a literal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5941c0d0 jyviko: geom: a general fill's crown fills out to the side its neighbours' normals face
- f7409dd59 jyviko: geom, kernel: a loop with fewer than three corners is filled by a ring of patches
- c088cf43e jyviko: geom: the patches about a centre are solved the same to the last bit on every run
- 25e275722 jyviko: Tests: a patch's continuity g3 is valid, g5 is the hostile word
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 49377d318 jyviko: geom: patches about a fill's centre join G1 there, with the linear gluing function
- 55cb6b32b jyviko: geom, kernel: the patch fill's sides run from corner to corner, not edge to edge
- 62d41a0cf jyviko: Tests: the fill tests evaluate a face's (u, v) on its NURBS form
- 30b12cea8 jyviko: geom: a crowned height field rises by the whole crown at its box's middle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Ribbon drop-downs as a grid of large icons, as an option (#4739)
Preferences > Interface gets two settings, both off by default:
- Menus: List | Large icons. With Large icons a panel's drop-down shows its
commands as rows of up to five icons at 32 px (twice the list's), keeping
the list's group headings and order. The name, shortcut and help are in
the tooltip, as on a ribbon button. Arrow keys move across and between
rows; a click starts the command; right-click and drag pin it as before.
Resting on an icon for two seconds arms a pin in its corner; a quicker
click anywhere starts the command, so nothing is pinned by accident. A
pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
grid) leaves out the commands the ribbon shows as buttons; a panel too
narrow for its buttons lists them again, and a menu is never left empty.
No icon artwork or colours change. Sketch > Create keeps its family list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch > Create in the large-icon grid: every variant under its family (#4739)
With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: groups side by side, no footer (#4739)
A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: a separator line between groups side by side (#4739)
As between the ribbon's sections: a 1 px line in the theme's border colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: at most three rows, growing to the right (#4739)
A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: group headings centred over their icons (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)
Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)
With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5732b62ec jyviko: Tapered extrude: the end check of a profile with holes takes the section a swallowed line leaves
- 738f336e1 jyviko: Raytrace: a closed box dielectric is certified from its mesh's geometry, in any tiling
- 9243b6550 jyviko: SMLib history: a split line between two pieces of one face comes from nothing
- 013978724 jyviko: geom: the patch fill's cross-boundary targets agree with its corners
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fb5ae6cdd jyviko: SMLib import: an extruded circle's circle comes from its widest span, not the face's range
- 17a466e6b jyviko: Ruled surface: a free strip on a straight edge gets a far curve that can bend
- f2982b47a jyviko: Sheet tests: the tiny cut inside the exact circle is above SMLib's modelling tolerance
- cf40a3e6c jyviko: Boolean regression test: the raked wedge's R4 rounds the four edges the issue picked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0b7468729 jyviko: Curvature comb: every comb shown at one scale, kept by the command
- 6ab96c658 jyviko: View analyses: one toggle group, its state in the session
- 9a45d4248 jyviko: Kernel rig: inspect.analysis is a display analysis switch, exempt like the others
- 8d590c198 jyviko: Kernel tests: the long-setback G2 patch's reach past the box from its exact surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9332
* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)
`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6896
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
* Sketch: find profiles island by island and say when the search is cut short (#6896)
Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.
Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.
The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfa84e84d jyviko: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly
- 6cc759750 jyviko: SMLib import: an extruded circle is a cylinder over the face's trimmed range
- 9b3572797 jyviko: Fillet rig: the known-failing list names the report- cases, not their old ids
- 9851718ea jyviko: Curvature comb: purple envelope and orange teeth from their own theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
`schema::issues(id, params)` looks up the command's typed contract and
lists what is wrong with the parameters (none without a contract or for
an unknown id). The batch preflight, the MCP bridge's pre-send check and
the app's check of a design-switching command each did that lookup
themselves; they now call it. No behaviour change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c9bf97ce4 jyviko: Blends: an edge is smooth only where its faces are tangent all along it
- 1e6c91a10 jyviko: Fillet rig: the concave arc where a bar's top meets a cylinder its sides run tangent into
- de9c005f2 jyviko: Blends: a blend face is named by its picked edge, not an edge it took up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf85e0a6c jyviko: Fillet rig: the knife edge's R2 round builds on the new SMLib pin
- 739e47b9d jyviko: Kernel tests: the basin rim chamfers check the kernel's refusal kind, not the named size
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94938b3b5 jyviko: Kernel rig sources: the kinds of the four sources the new cases cite first
- 191fa9839 jyviko: Fillet rig: the R7 round past a thin wall's inside corner held to its exact volume
- ecbca1f74 jyviko: Fillet rig: grade the 851 rows' rounds G1 at their own tangent seams
- 30dce7fba jyviko: Fillet rig: the sloped basin's rim loops with their mitred corners' exact volumes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8b9e0e0c0 jyviko: Continuity rig: an opened tube end capped G1 and G2, as cases
- 24a58066c jyviko: Sweeps rig: a circle touching its axis revolved a quarter turn, as a case
- 51316b7ec jyviko: Import rig: the horn torus quarter written to STEP and read back, as a case
- 8524458ce jyviko: Tests skill: when a check is a unit test and when it is a rig case
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 368b34e3b jyviko: Tessellation: a curved face's grid reads the quarter turn from its surface, not its parameter
- 9da160892 jyviko: Tessellation: two corners of a face a hair apart, within their tolerance, are one point of it
- 7cbbe2bc2 jyviko: Tessellation: two curves that touch within the chord tolerance share nodes, so the face pinches there
- 95f1258b7 jyviko: Motion interference: a collision is deepest where the parts share the most volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c1328212d jyviko: Tests: curved bodies' contact stop is checked, not the sweep's internal step
- 172c64cef jyviko: Tests: the naming corpus checks that references resolve and builds agree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ea43b5c2 jyviko: Tests: a tray's sheet names are checked by where their points lie
- 978ae1d51 jyviko: Tests: a mirrored sheet's flat pattern is its source's mirrored, as the code makes it
- 2be7b1b6f jyviko: Tests: the extruded ellipse is checked by its area, not its face count
- 51855589d jyviko: Tests: Open in EasyPrint's STL is read back, not measured in bytes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4d7553dd8 jyviko: Kernel tests: a ruled strip's moved handles are checked on its far curve
- 21c1ed541 jyviko: Kernel tests: rim rounds meeting at a concave corner are mitred, not swept
- 03054211b jyviko: Tests: the arc-touching cut is checked by its volume and area, not its face count
- 5e7e1485c jyviko: Tests: the knife-edge R2 fillet is checked once, in closed form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5229bbedd jyviko: Kernel tests: a small bend's display mesh is graded on the display mesh alone
- 4ff38619c jyviko: Kernel tests: the rounded shell's planar roles are graded by name and exact volume
- a3848d1d0 jyviko: Kernel tests: modifier histories are graded by what each face is, not how many changed
- a45d56aa9 jyviko: Kernel tests: the slot plates' STEP files are graded by their bounds and volume, not surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a0c24b87c jyviko: Kernel tests: the back edge then the arc is one more pair of the rounds-in-sequence test
- c69dbc5d3 jyviko: Kernel tests: the collapsed taper's mesh is held to its B-rep, the taper to validity
- 87e9123d3 jyviko: Kernel tests: a crowned patch's hostile crowns are refused for their range
- 65718cd41 jyviko: Kernel tests: the five- and six-sided fills are graded by what they make, not their face counts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3569298a4 jyviko: Kernel tests: a chamfer whose leg runs off the thin rim is refused, naming the largest
- a8f393ca3 jyviko: Kernel tests: the tabbed plate's rim rounds take their exact volume
- 5af467aef jyviko: Kernel tests: the box rounded after separate bottom rounds takes its exact volume
- 659bd866b jyviko: Kernel tests: the #871 part's fitting rounds take their exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2f88ca2f6 jyviko: Kernel rig: everyday chamfers of box edges and pocket rims
- 51641123c jyviko: Kernel tests: drop the mixed arc-and-line mitre test, the rig's 485 grades it
- e9963439b jyviko: Kernel tests: the round into a hole moves to the rig, with the hole cut the test's way
- 65e46a962 jyviko: Kernel tests: a round as tall as its wall and more builds on the disc
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01d0d6bb9 jyviko: SMLib bindings: a curve list holds up to 16384 curves, as the C API now takes
- 96b248d28 jyviko: Kernel tests: a slot narrower than the taper closes partway up and builds; a closing hole is refused
- 42d4d0ecd jyviko: Engine tests: rounding the long edge then the left upright matches the three edges their chains take
- b66821c82 jyviko: Kernel tests: the third round at a mitred corner takes its tangent chain, a sphere octant
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 785b78bea jyviko: Surface Fair test: fair the B-spline patch on a saddle rim, not an offset sphere
- 1817cffaf jyviko: Shell: a basin shelled past its 4 mm rim measures its exact sharp offset
- 2e123eb3d jyviko: Kernel tests: a swallowed tip's volume is the drafted wedge's, every wall at the taper
- 1661fe292 jyviko: SMLib: pin 985faae, the batch of 2026-10-30 evening (tangency-labs/smlib#63–#65)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
sketch_consumed knew Extrude, Revolve and the sheet metal flanges but not
a Hole drilled at a sketch's points, so that sketch stayed drawn inside the
holes. A Multiple hole now counts as using its sketch; Edit Feature shows
its points while the dialog is open. Single holes keep their sketch shown,
since a hidden sketch offers no points to snap to.
* claim: #9299
* Recover unsaved design?: Discard all, with a confirmation (#9299)
A Discard all button at the left of the window's footer, away from Later.
It asks first ("Discard 7 autosaves? This cannot be undone.", Discard all /
Cancel), then discards every listed autosave the way its own Discard button
does (doc.recovery_discard on each id). Cancel goes back to the list
unchanged. The button publishes the handle recovery:discard_all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9265
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Preferences: a setting in a row with no label is found by the words it shows (#9265)
A search hid a row by its label before its controls were drawn. Seven checkbox rows and two segmented rows on the Interface page have no label, so "status bar", "search results" and "reveal on hover" found nothing. A hidden row with no label now keeps the words of its controls, as a dropdown keeps its value, and is drawn when they match. Each such row has a key of its own, so its neighbours are not drawn with it.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #9195
* Viewport: an opened design is framed at the home view, in the middle of the view (#9195)
A fit the viewport cannot frame yet is kept and asked again on the next frame instead
of being consumed and lost, so a design opened from the Home screen or by launching on
a file no longer comes up at the default camera, wherever its own coordinates put it.
Framing then centres the model on the view rather than on the free rectangle between
the floating controls: `Layout` carries `middle`, the view without the panels, computed
before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The
model is still sized to `drawable`, so it stays clear of every control, but only a panel
moves it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Viewport: keep the centred fit clear of the controls, and frame --sample (#9195)
The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is
not inside `drawable`, so the model could sit under the compass, the navigation bar or the
render product frame. The model is now sized to `drawable` as before, and only the room left
over in it moves the model towards the middle of the view.
`s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the
Move dialog that docks on the right afterwards covered the ring's old grab point.
A launch with `--sample` builds the design straight into the session and never asked for a
fit; it now comes up at the home view, framed, like an opened design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195)
With the model now centred on the view, one of the test's perspective drag points lands within
the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few
pixels from the cursor. The orbit keeps that point still, as it should; the test compared it
with the cursor instead of with where it started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Both commands need a choice, but start_with_variant_memory only special-
cased the parameterless display toggles, so a click on the ribbon (or
command search, a shortcut, ui.start) ran them with {} and showed only
the engine's "style must be ..." / "tool must be ..." error.
They now open a short menu, the way Units does: under the ribbon row
that started it (a second click closes it), or in the middle of the view.
Visual style lists the four styles with the current one checked; the
Navigation tool lists Orbit, Pan and Zoom, and picking the latched one
releases it, as its navigation-bar button does. The four styles come
from one list shared with the navigation bar's menu.
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
A page window (Preferences) filled its frame with
dialog_body.gamma_multiply(0.97), which also scales the alpha, so the
ribbon's labels showed through its title bar, search field and heading.
It now uses the opaque dialog_body, as every other window does; the
navigation bar keeps its own translucent resting fill.
* i18n(uk): add pending translations for missing strings
* i18n(uk): add pending translations for new strings from upstream
* i18n(uk): improve pending translations
* i18n(uk): professional translation of all pending strings
* i18n(uk): finish the pending translations for 29 October
Every value in uk-sync-29oct.json is now Ukrainian except the seven symbols
and formulas that must stay unchanged: the modifier keys, HDR and the three
inertia tensors.
Terminology follows uk.json: spot light is "прожектор", directional light is
"спрямоване", body is "тіло", render is "рендеринг". Camera orientation keeps
тангаж, рискання and крен.
Removes history-origin-bodies.json, which was empty after its content moved
into this file.
- worst_status searched the history and the results for each feature of a folded folder, the square of the history's length every frame
- A folder of 16 features or more now finds places and results in tables built once, first of an id winning as feature_index and Model::result do
- Frame on a 4,880-body design: 20.4 ms -> 7.9 ms (M4 Max, release, headless)
- Test a_folders_mark_is_the_worst_of_its_features_own
Co-authored-by: P'tite Tête <asso@ptitetete.com>
A new user guide page, Equation curves, under Sketching: the first curve step by step, Explicit and
Parametric explained with tables of rules to type (a line, a parabola, a wave, a circle, a spiral),
radians, parameters with the involute of a base circle, building a part (a closed flower curve
extruded), editing, and common mistakes. The technical details stay in a short section for scripts
and agents.
Seven pictures, rendered by `cargo xtask book` from new scripts in docs/book/scripts/equation-*.json
(gitignored output, attributed in attribution/pending/docs-equation-curves.md). The Sketching page
keeps a short summary and links to the new page.
* claim: #9184
* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)
`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.
`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".
The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Control channel: a design-switching command is checked at the request's level
Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch corners: a round that would use up a whole arc is refused
A quarter arc of radius 5 running into a line along it, rounded with
radius 5, put the round's tangent point at the arc's other end and left
an arc of no length. round_corner now skips a round whose tangent point
falls on either curve's other end; with none left it says that radius
does not fit, as for two lines (found by a local trim fuzzer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch corners: a round where the curves meet smoothly is refused
A line running on from an arc's end along its tangent (off only by rounding)
has no corner, but the round's tangent points landed within 1e-7 mm of it and
the round came out as an arc of no length (found by a local trim fuzzer). The
corner test's line met its arc this way too and was checking that output; it
now meets the arc at a corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9179
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* sketch.inspect: each profile loop names a curve once, not once per segment (#9179)
A profile records one curve id per piece its loop walks, and a conic or
spline is walked as many short pieces, so sketch.inspect listed a single
Bezier curve 50 times in a profile's `curves` and as often in a hole loop.
The reply now names each curve of a loop once, in the order the loop walks
them (solidcraft_sketch::distinct_curves, as delete and profile references
already do). The solved profiles keep their per-piece lists.
The lists are now a profile pick as they stand: a whole_boundaries pick
refuses a curve named twice, and the regression test extrudes the wall
from the reply's lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
An SVG import leaves a sketch with regions and no body. The marquee (box select) took only the bodies, so the imported geometry was unreachable with the selection tools: a marquee over it selected nothing, and a click on a region did not take it either.
The marquee now takes the regions of the shown sketches when the design has no body. A design that already has a body keeps the old exclusive behaviour: the marquee takes the bodies alone, not the regions of the sketches that are shown. A dialog that asks for edges or faces (the Patch dialog) never takes the regions: they are neither.
* claim: #2829 (construct.* contracts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contracts for the construction axes, points and planes
The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 73b053221 jyviko: Face capture test: extruding a split face in an uncaptured component is refused
- 918429c6d jyviko: Sheet machining: a trimmed To Object tool is measured as the prism its record proves
- f37b95498 jyviko: Native B-rep: a body is written as it serializes, not through a JSON value
- 298869f4d jyviko: Engine tests: the hostile-parameter test builds its starting model once per command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9188
* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)
Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.
Changes a default: no
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9087
* fix(#9087): ui.home refuses a sample index that names no sample
The control channel passed the sample index straight to open_sample, which drops an index that names no sample and says nothing. The request then replied ok, so an agent could not tell a typo from a sample that had opened.
The index is checked before it reaches open_sample: an index that names no sample is refused with the valid range in the error. A sample that exists still opens, as before.
* claim: #9086 (edge lengths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: an exact circle's or arc's length agrees with its circumference (#9086)
Measure gave a circle's or an arc's length_mm as the length of the
polyline drawn for it, which runs inside the curve, while the same reply
gave its circumference or arc_length from the exact circle. When the edge
is known exactly (the kernel's circle, or a sketch's own circle or arc),
length_mm is now its radius times its angle. A circle fitted to a mesh
body's polyline keeps the polyline's length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 01477bb14 jyviko: Tests: the saved curved strip is the link a truck build saved
- 0c4f54edf jyviko: rustfmt
- 74001e532 jyviko: Tests: check what each operation is for, not how many faces it makes
- a84369fe7 jyviko: Sheet convert: a wall cut off at its strip keeps each corner with its own edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9029
Co-authored-by: Cursor <cursoragent@cursor.com>
* Square sketch axes when looking at a turned plane (#9029)
Look At only yaw-aligned sketches facing world up/down, so a sketch on a rotated component stayed tilted on screen. Roll (or yaw at the poles) so the sketch's x runs right and y is upright.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #9108
Co-authored-by: Cursor <cursoragent@cursor.com>
* Canvas calibrate: pick Point A and B with viewport clicks (#9108).
The Calibrate card only had typed coordinates, so users could not mark the image. Clicks on the canvas now fill A then B, with on-image markers and a short hint.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Calibrate canvas: ja/zh/ar/he/vi strings for the click hints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming: a proposal from a second implementation
A design proposal for the persistent-naming failures still open (#4341,
#5198, #5308, #5857, #5858, #5860, #5861), from building persistent naming
in Form Studio: fall back by lineage, never by geometry alone; a suppressed
maker is not a lost reference; names saved as structured one-level values;
ordinals from the feature, not the kernel's face order; split picks resolve
to all pieces; body identity apart from the display name. Documentation
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming proposal: body identity follows the #5308 plan
Change 6 now agrees with bluecmd's plan on #5308: an id minted from
next_id and stored per feature slot, better than the derived identity
the first version proposed. It adds that a stored id is only as stable
as the slot assignment, which today follows each lump's least face
name, and gives the lineage signature from the #5308 discussion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4515
Co-authored-by: Cursor <cursoragent@cursor.com>
* Inspect: keep analysis legends clear of a left History (#4515).
Draft, Accessibility and Curvature legends were painted at the viewport's left edge under a left History sidebar. Place them in the free workspace content instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
offscreen_device() asked wgpu for its default adapter and ignored the
SOLIDCRAFT_GPU policy that headless pictures follow, so with
SOLIDCRAFT_GPU=software the ui-egui offscreen tests still opened the
hardware GPU. Under hardware or software the adapter now comes from
solidcraft_gpu::select (new pick_among, which pick uses too); under cpu
there is none; unset (auto) keeps wgpu's default adapter as before.
Part of #9040.
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9147
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the Sketch Grid box in the Sketch panel turns the sketch's grid off (#9147)
The box sets the open sketch's hide_grid, but the viewport drew the grid
whenever a sketch was open, so hide_grid only reached the ground grid and
the box did nothing. An open sketch now shows its grid whatever the Grid
switch says, unless its own Sketch Grid option is off; the window guides
that renders and the control channel use follow the same rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7521
* fix: headless pictures return their draw counts with the picture
`the_renderer_counts_what_it_draws` drew with `Capturer::rgba` and then
read `Capturer::last_stats()`. The capturer is shared with the binary's
other tests, which draw on it from parallel threads, so another picture
could land between the two calls and the test read its counts (e.g. 10224
triangles for the empty design).
`Capturer::rgba_with_stats` returns the picture and its counts, read while
the call still holds the device. `last_stats()` is removed; this test was
its only caller (the performance overlay reads the viewport renderer's own
stats handle).
New test `pictures_drawn_at_once_each_count_their_own` draws empty and box
designs from eight threads on the shared capturer. Against the old pair it
failed 25 of 40 full runs of the `capture` binary; it passes with the new
call.
* fix: a headless picture waits for its read-back's answer
A picture maps its read-back buffer, waits for its submission with
`device.poll(PollType::Wait)`, and then checked once with `try_recv`
whether the map callback had run. wgpu calls a finished mapping's
callback from whichever thread next maintains the device, in a poll or
in any `queue.submit`, after it lets go of the device. When another
thread got there first, the wait returned with the mapping done but its
callback not yet called, and the picture failed with "not supported yet:
reading a picture back without waiting for the browser", the error meant
for a browser.
On the shared capturer, the other thread is another picture's device
check (`probe_lost` submits nothing before it takes the capturer's lock),
so the `capture` tests failed now and then: `bad_picture_sizes_are_errors`
(its last 8 x 8 picture), `pictures_show_a_plain_cut_without_the_hatch`,
`pictures_blend_a_line_that_is_not_opaque`. In the app, the window's
frames are submitted on the device its thumbnails and `ui.render`
pictures are drawn on.
A native picture now waits for the answer, up to the picture timeout; a
browser still answers later, on its own.
New test `pictures_read_back_while_another_thread_uses_the_device`: 2,000
small pictures while another thread polls their device. Without the fix
it failed 19 of 20 runs (1 to 7 pictures each); with it, 150 of 150 runs
pass. `bad_picture_sizes_are_errors` now prints the error it gets.
* Release 0.27.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render job test: wait for the cancelled job's reservation to be released
The worker drops a job's reservation just after the job turns terminal, so
checking admitted bytes right after wait_timeout raced (10 of 40 local runs
failed). Poll with a deadline, as dielectric_tests does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bf74dcbbe jyviko: Tests: a round wall is one face, its name without a piece number
- 8f914ddd2 jyviko: Tests: the saw cut's halves named after their faces, listed in the kernel's order
- 1a5a3b5eb jyviko: Tests: an extended cylinder strip stays one face in every mode
- a3f150257 jyviko: Tests: the tapered bosses' volume in closed form, not truck's measure
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ec4eebaa8 jyviko: sew: a folded pcurve has no piece shorter than it lifts onto its edge
- 1bc8b204f jyviko: Kernel tests: a circle is one closed arc, a round wall one face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 41206c065 jyviko: Sheet metal: a whole circle in the outline is sewn as its two exact halves
- 374d3b7e8 jyviko: Sheet machining: a depth an ulp off the sheet's face is on it
- 909f9a20e jyviko: Sheet face names: a triangle takes a flat face's name only where that face faces its way
- ff9ccaf1e jyviko: Sheet tests: the DXF outline and the folded volume as the exact flat pattern and measure give them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ae748417 jyviko: Robustness: seed 5's edge-only join keeps two bodies, as joins have since 94ee28d5c
- 48d72ba2b jyviko: Convert Mesh: a triangle of no area is dropped, not refused (#4561)
- a0a75dc78 jyviko: Kernel rig: import/4561 passes, off the known-failing list
- beaed5b35 jyviko: Kernel rig: threads/2369 names the tap maker's 6.8 mm drill for M8
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4ebc3d078 jyviko: UI tests: the thread catalogue's error and Press Pull's hole wall as they are now
- 2debdd87a jyviko: Pi case test: each standoff is four faces, its walls one face each
- db757efc7 jyviko: Tests: the pi case and the hole wall read as on green-truck-era-tests, so both branches agree
- 191c1b855 jyviko: Fair: a net of up to 128 x 128 control points, the band bounding the solver
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8b45f277 jyviko: STEP import: a void reads as a cavity whichever way its shell flag points, again
- 64188ce43 jyviko: Planar regions: a hole goes to the material that holds it, read closer than the hole lies
- 1a0289011 jyviko: Planar region tests: edges on one line are one edge of the result
- 514426e5d jyviko: STEP import: a closed spline a face lies across the start of starts clear of the face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c47c1d26a jyviko: Tests: the fit and taper tests use geometry that still doesn't fit
- 8c37bc756 jyviko: Fillet rig: R10 past the full round is refused naming 7.5 mm, as the case asks
- a100c7c06 jyviko: Loft rails: a station grows about its section's centroid by length, not the mean of its control points
- e5476706b jyviko: Issue 616 test: the lid's volume is its closed form, 6703.5344
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b779364 jyviko: Tests: a point path's sweep has a wall along each line; coplanar walls join at a corner
- d945cf53a jyviko: Fillet and chamfer: a refusal as too large names the largest size that fits
- 8bcd81244 jyviko: Tests: a blend refused as too large is SMLib's NO_ROOM, in its own words
- deaf8e679 jyviko: Tests: convex blends past a cliff are cut from the part, as the owner decided
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b9d0a3308 jyviko: Mesh memo test: SMLib's booleans mesh neither operand
- b6c3bf3c5 jyviko: Face capture test: an Offset Face's top is anchored by its exact history name
- 1ee5f1af3 jyviko: Kernel: a mitred sweep carries a slanted section all the way to each mitre
- 1e4b64402 jyviko: Provenance: a sweep's origins are the ones it recorded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 15c31a96f jyviko: Kernel: planar source lineage finds each face's support through an index, with no budgets
- 049b2bc40 jyviko: Lumps: a face-source table of another length is refused, never sliced
- f60bf96df jyviko: Planar sources test: two bodies side by side joined as the record requires
- e1b762c4b jyviko: Booleans and Shell keep the lines faces were split along on purpose
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ffb1e650d jyviko: Isocurve Analysis: count curves each way, evenly spaced across the face
- 177eb207f jyviko: Exploded views are shown only: the design's placements and Capture Position leave them out
- 8d72cfa59 jyviko: SMLib export: a face's outer area reads only its own loop's edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7e613b6f jyviko: Records: the item budget bounds input, not the kernel's own results (Refs #3992)
- cf2b3a62f jyviko: Fair Surface: a face of degree 1 one way fairs along its curved way, and a face with nothing free is left as it is
- 16d467e14 jyviko: Point and Plane Along Path: exact on the path's curves by arc length, and a t outside 0…1 is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch: snap where two recent centre and midpoint guides meet (#8694)
The alignment guide remembered one reference and did not move the cursor. Keep the previous centre or midpoint as well, and snap a drawing point to where their guides cross.
* Sketch: keep the recent-guide crossing snap off until asked (#8694)
The crossing snap was on whenever alignment guides were. Give it its own Sketch preference, off by default, so the guides stay visual until someone turns the snap on.
* Sketch recent snap: ar/he/vi strings and clippy borrow fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9072
* MCP: --param-check checks calls to the running app (#9072)
`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97935eed8 jyviko: Inspect: the centre of mass from the exact faces, as Measure takes it
- d094d43f2 jyviko: Compare Bodies: each region measured exactly, on the cut of the two bodies
- 864bcbccb jyviko: Compare Bodies: a region the exact cut cannot measure has no volume and says why, never an estimate
- a1dbb7c08 jyviko: Kernel rig: the two G2 corner cases are graded clear of the vertices, as the ladder grades them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 80d08659f jyviko: Kernel rig: the booleans, import and threads lists name the 5 cases that fail on the pinned SMLib
- 5c45570c9 jyviko: Kernel rig: rustfmt; measured values in results are decimals, within tolerance; the ladder records 06/023 passing
- 393a9aab6 jyviko: CI: native and reference tests stay on pushes until develop is green
- 322ac2592 jyviko: CI: the release gate still calls ci.yml (workflow_call)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
theme::apply always sets egui's theme to light or dark, and egui's own window
sync then told the native window to be light or dark. A macOS window told so
keeps that appearance and no longer reports the system appearance changing,
so with Theme set to System the app stayed light after macOS turned dark. The
app now syncs the window itself: the system's appearance while the theme
follows it, the theme's own otherwise (for the title bar).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9025
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sketch: an old edge-on projection keeps its line when it is re-resolved (#9025)
A face seen edge-on was saved as two lines on the same two points, one each way, and is one line now. Re-resolving the link dropped both lines and built a new one under a new id, so an offset that names the first line as its source failed with "an offset source vanished or changed shape". Keep the first line and drop only the second.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
Fold the pending design format changes (sketch-equation-curves, timeline-joint-folders) into format 44.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6af622978 jyviko: Threads: a taper thread's groove follows its crest cone across the section, so no sliver of the flanks is left
- 3f5efdf70 jyviko: Kernel rig: one results check, each {step, pointer?, json, rel?, abs_mm?}
- dc093b0cb jyviko: Kernel rig: a symmetric surface extrude with no convention is the total distance (#9091); the per-side reading is its own case
- 55338e139 jyviko: Kernel rig: each area's PATHS names only its own files, and EXEMPT lists only commands no case uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
The check for a constraint that shrinks a curve to a point took under 1e-6
for a point. One solve could squeeze a 49 mm side to about 1.2e-6 mm and
the next take it the rest of the way, so neither solve tripped it (two
rectangles' corners made coincident, found by a local sketch fuzzer). Under
1e-5 now counts: in 4000 random sketches the constraints that still
collapsed a line went from 9 to 0, and every refusal rate stayed the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9015
Co-authored-by: Cursor <cursoragent@cursor.com>
* Evaluate bare length offsets in the design's units (#9015)
Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9fecf7709 jyviko: Kernel rig: interference and clearance between placed occurrences
- 22cd8e74f jyviko: Ladder generator: cases.py writes the values committed by hand for 05/007, 06/017, 07/016 and 11/003
- 487914427 jyviko: Ladder 05: UNC, UNF, Rc and NPT tapped holes, each drilled to its tap maker's drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #6921
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run refuses unknown options and takes --param-check (#6921)
`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run's option check takes --param-check; warn on timed runs as steps complete
`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8644
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web: open tabs share settings changes, so one tab no longer undoes another's (#8644)
Every open tab of the web app saved its whole copy of the settings to the
same browser storage, every 30 s and on focus loss, so a tab still holding
old settings put them back over a toolbar change made in another tab.
A tab now writes its settings in the frame they change, and the other open
tabs load them from the browser's storage event, so their own saves keep
them. Settings loaded that way aren't written back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3b7dabdb7 jyviko: Kernel rig: bodies moved, copied and extracted, designs inserted, occurrences copied, reparented, dragged and exploded land where worked out
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e7eb8a5d4 jyviko: Kernel rig: contact sets stop a drive at the block, touching faces don't, and edit, list, enable and disable do as coded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 489441907 jyviko: Kernel rig: motion studies play, plot and trace to known values; a crank-slider's slider follows r cos t + sqrt(l^2 - r^2 sin^2 t)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 236a5597e jyviko: Kernel rig: gears turn by their radii, a rack travels r per radian, a screw its lead per turn, a disc cam lifts 2e
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0da95a8cc jyviko: Kernel rig: each joint type moves its part to the placement worked out by hand, limits clamp, as-built keeps it in place
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 445f6faa4 jyviko: Kernel rig: parameter cases, an expression in a sketch dimension and a cyclic one refused
- 2cd1a0335 jyviko: Kernel rig: an assemblies area, with the source files that rerun it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 305c36479 jyviko: Kernel rig: inspect cases, the gap between two spheres, their lens where they overlap, none past the clearance
- 4355e15df jyviko: Kernel rig: inspect cases, a box against a taller one and an identical one, and a tolerance out of range refused
- 7b1fbb57f jyviko: Kernel rig: inspect cases, the comb of a sketch circle and line and a cylinder edge, and nothing picked refused
- 5c80ef4ad jyviko: Kernel rig: inspect cases, three isocurves each way on a cube's top, and a count of 0 refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cacc394f9 jyviko: Kernel rig: inspect cases, the centre of mass and volume of a box, of a box and cylinder, and an unknown body refused
- f43a0c7ac jyviko: Kernel rig: inspect cases, the smallest radius of a fillet, an ellipse and a circular edge, and none on a box
- 311b57bb7 jyviko: Kernel rig: inspect cases, a fillet's seams are G1 with a 1/r curvature jump, a box edge is sharp, too few stations refused
- 58b384d7d jyviko: Kernel rig: inspect cases, the overlap volume of two boxes, none where they only touch, a box inside a box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1ac12ba72 jyviko: Kernel rig: construction cases, where three planes meet, and parallel planes or planes through one line refused
- f72108895 jyviko: Kernel rig: construction cases, where two edges meet or come closest, and parallel edges refused
- 1acbf1e9c jyviko: Kernel rig: construction cases, a point on a vertex or another construction point, and no body refused
- 33e3b6379 jyviko: Kernel rig: the inspect area, what reruns it, and the analyses that only draw
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02ee36ce9 jyviko: Kernel rig: construction cases, the plane through parallel and meeting edges, and skew edges refused
- fbe540b40 jyviko: Kernel rig: construction cases, a point along a sketch line and arc, and one past the end held at the end
- a0bd94f4d jyviko: Kernel rig: construction cases, the centre of a circular edge, sphere, torus and sketch arc, and a flat face refused
- 8a8960f13 jyviko: Kernel rig: construction cases, where an edge crosses a square and a slanted plane, and a parallel edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0e3798ae jyviko: Kernel rig: construction cases, the midplane of parallel faces, of a corner, and of a plane with itself
- 3ff1347d9 jyviko: Kernel rig: construction cases, a plane through an edge or axis square to a plane, and a line along the normal refused
- 6fed4f996 jyviko: Kernel rig: construction cases, the tangent plane to a cylinder and a sphere, and a point on the axis refused
- 8be5341c7 jyviko: Kernel rig: construction cases, the plane through three points or vertices, and collinear points refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 776d979ce jyviko: Kernel rig: construction cases, an axis square to a flat face and to a cylinder through a point, and a point on the axis refused
- 84a326f16 jyviko: Kernel rig: construction cases, the axis of a cylinder, a torus and a circular edge, and a flat face refused
- 17c0aee44 jyviko: Kernel rig: construction cases, the line where two planes meet, square and slanted, and parallel planes refused
- f9c53503b jyviko: Kernel rig: construction cases, a plane turned about an axis in it, off it and along its own normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b8c6bb921 jyviko: Kernel rig: thicken a sheet into a slab and a tube, trim by a plane and by a circle, and refuse a stray keep_with
- 70f695c6b jyviko: Kernel rig: grade construction geometry and the numbers a command replies with
- 5c0db8e82 jyviko: Kernel rig: the construction area, with what reruns it
- ffd3d5fb1 jyviko: Kernel rig: construction cases, an axis on a straight box edge, and a circular edge refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #9016
Co-authored-by: Cursor <cursoragent@cursor.com>
* UI: keep Distance entry under Preferences and Report a bug (#9016)
Canvas value boxes used Foreground order, so they covered system windows. Draw them as Background chrome instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75353cb04 jyviko: Kernel rig: extend, extrude, loft, patch, revolve, stitch and sweep surfaces, a normal case and an edge case each, with their exact areas and surface kinds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f861f44e1 jyviko: Kernel rig: a matched sheet meets its target's edge at the order asked, flat where both are flat, and a solid is refused
- 3d080e96a jyviko: Kernel rig: fairing leaves a flat patch flat and a face with no free control rows as it was; zero strength is refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 425c8ed42 jyviko: Kernel rig: a blend between coplanar sheets is flat, a step blend meets both sheets at the order asked, and unchained edges are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ac95e47e jyviko: Kernel rig: a reversed normal sends a later thicken to the other side, and a solid is refused
- 680f2ee5c jyviko: Kernel rig: boundary surfaces through a square, a triangle and a network of four lines have their exact areas; five curves are refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a01d82f30 jyviko: Kernel rig: untrim removes holes from a sheet, a cylinder sheet and a solid's face, and refuses a face with none
- b2cc77094 jyviko: Kernel rig: unstitch takes a box and a cylinder apart into their faces, or one face out, and refuses a single face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bc3c9185c jyviko: Kernel rig: grade the kinds of a result's surfaces, its B-spline degrees and spans, and its free edges
- 657c5af57 jyviko: Kernel rig: surfaces area; an offset plane, cylinder and sphere land exactly where the distance puts them, and faces across a sharp edge part
- 476b04ed3 jyviko: Kernel rig: ruled strips along a normal, at 45 degrees and tangent are the exact plane, cone and flat ring, and a closed chain mitres into a frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5ba60bd9d jyviko: Kernel rig: plastic cases, bosses, lips and grooves, rests, a snap fit edge case and the plastic rules, each with its answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 67dd8892f jyviko: Kernel rig: bend table cases, JSON and CSV rows with angles, radii and K-factor allowances, and an unknown format refused
- 235645db5 jyviko: Kernel rig: the ellipse length's Simpson weights as a named step
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fce8e4a26 jyviko: Kernel rig: perforation cases, square and staggered fields counted hole by hole, a field kept clear of a bend zone, and a pitch refused
- c114e6c35 jyviko: Kernel rig: flat DXF cases, outline, cut and bend line lengths, an ellipse exact and as arcs, and no sheet refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2edf64952 jyviko: Kernel rig: hem cases, closed on a top and a bottom edge, open and flipped, on a flange, and one too short
- c60bcb55e jyviko: Kernel rig: path flange cases, a Z section, one line at 45 degrees down, and a path straight on refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 815711421 jyviko: Kernel rig: second cases for draft (two adjacent faces), rib (in plane), press pull (an edge), split face (sketch and tool face) and sketch projection (a face loop and a silhouette)
- acd7bb066 jyviko: Kernel rig: the boundary-fill crescent ends at the cusps, x = 5
- 45c955326 jyviko: Kernel rig: a case can check the files it writes and the commands' answers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e7810659 jyviko: Kernel rig: frames area, frame member and inserted profile cases with their exact sections, placements and a too-thick wall refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a5513a4e1 jyviko: Kernel rig: boundary fill cases, the lens and the crescent of two cylinders, and a point outside every tool refused
- f0eac58a2 jyviko: Kernel rig: align cases, face onto face as a move, a side face turned onto a top face, and a face onto an offset plane along its normal
- 1e9cefe1e jyviko: Kernel rig: web cases, two gussets in a channel's corners and two walls grown along the sketch normal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af8f28e34 jyviko: Kernel rig: scale cases, a cube doubled about its corner, a sphere scaled into an ellipsoid of the same volume, and a zero factor refused
- e1724be62 jyviko: Kernel rig: pattern on path cases, bosses along a line, bodies turning with an arc's tangent, and instances past the path's end refused
- cf58e3735 jyviko: Kernel rig: replace face cases, a top moved onto a plane and a lower step raised to the higher top (fails today: SMLib offset of faces refuses closing the step wall)
- be4f15db6 jyviko: Kernel rig: bounding solid cases, two boxes with a margin and a sphere's exact box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d671bbbc1 jyviko: Kernel rig: every registry command has a case or an exemption (kernel-cases --coverage)
- 6701b1c5e jyviko: Docs: how the kernel rig picks its areas, how a new area joins, and the coverage check
- 585789c60 jyviko: Kernel rig: cone cases, a frustum on X and a full cone of negative height with their exact volume, area and centroid, and a zero height refused; a new solids area
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e71177769 jyviko: Docs: the kernel rig gate, updating a known-failing list, re-recording the ladder golden
- d84d00bb4 jyviko: Release gate: the packages' dry run is unsigned and skips the release job
- 02e1f1841 jyviko: Kernel rig: each area runs only when the files its PATHS lists change, every area on the shared core
- b67e93211 jyviko: Kernel rig: an area's PATHS names only its own files, never the shared core
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Sketch Trim: a cut at a curve's own end leaves no piece of no length
A curve that ends where another one ends crosses it there only within the
intersection's tolerance (1e-6), but bracket dropped cuts at the curve's
ends only within 1e-9 of its parameter range. A line ending on an arc's end,
trimmed from its other end, was cut a hair inside its own end and kept a
piece about 1e-7 mm long (found by a local trim fuzzer: 78 such trims in
4000 sketches, and 8 breaks). bracket now also drops a cut within that
tolerance of the curve's ends, as add_cut merges cuts that close together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Extend: a touch at an arc's growing end is that end, not a stop
An arc whose end is where a line ends that touches the arc's circle there
found the touch a hair beyond the end (within the intersection's tolerance),
stopped on it, and added an arc from that point to itself. A hit within that
tolerance of the growing end (1e-6, as for the far end) is now the end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A constraint whose only solution squeezes curves to a point (a rectangle's
corner made the midpoint of its opposite side, or two opposite corners made
coincident) collapsed the whole rectangle while the sketch said solved. A
solve that shrinks a line or circle from over 1e-3 to under 1e-6 now counts
as one that fails, as one that throws points far away does: a strict edit is
refused, another keeps the sketch from before its solve, and the free solve
after the held ones in apply_in_order refuses the constraint.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Skip drawing and interaction for history chips outside the strip's visible part, after their slot is recorded
- Keep a dragged or focused chip, and every chip while a popup is open
- Frame on a 4,880-body design: 20.3 ms -> 14.6 ms (M4 Max, release, headless)
- Test a_long_timeline_paints_only_the_chips_in_view
Co-authored-by: P'tite Tête <asso@ptitetete.com>
On a Windows account whose %TEMP% is a short (8.3) path, such as
C:\Users\MATHEU~1\AppData\Local\Temp, three tests failed because they built
their folders from std::env::temp_dir(), and the agent file scope refuses short
names ("not allowed for this agent: short (8.3) names such as `PROGRA~1`"):
- engine: cmd::render::settings_tests::embedded_hdr_capture_rejects_parameters_scope_and_cpu_primaries_without_mutation
- ui-egui: agent_chat::tests::file_actions_wait_for_the_user
- ui-egui: agent_chat::tests::permission_modes_decide_what_asks
They now use vfs::temp_dir(), which spells the folder with long names, as
libraries_tests and motion_tests already do (#1385, #1211).
Checked on Windows 11 x64 with the 8.3 TEMP: the agent_chat and
render::settings tests (113) pass, and clippy -D warnings is clean for both
crates.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7287
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: show a command's place in the ribbon, also inside section menus (#7287)
Hovering a command result in Search commands switches the ribbon to the command's
tab and marks its button with its tooltip; a command that has no button there
opens its section's drop-down on its row instead. Leaving the results (or closing
the box) goes back to the tab the user was on, so pressing S, typing and Enter
works as before.
Starting a command from the box makes its button or section label blink twice,
and a command started from a section drop-down marks that section's label while
it runs, like a pressed button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: the ribbon reveal is a preference, off by default (#7287)
Preferences › Interface › Show search results in the ribbon (`ribbon_reveal`) turns on the hover
preview, the blink after a start and the running mark on a drop-down's panel label. Off, the
ribbon behaves as on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the ribbon reveal setting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7912
* Sketch: dimension a sketch entity against a model edge
A dimension took sketch entities only, so measuring a sheet-metal body's edge
was refused with "cannot dimension that combination of entities". The
entities now take a model reference too, an {edge: [x,y,z], body?} or a
{vertex: [x,y,z], body?}, which is projected into the sketch first, as the
constraint commands' operands are since #6348, and measured there.
The Dimension tool picks a body's edge or vertex when the sketch has nothing
under the cursor, and reads the pick back into the reference the command
takes.
* style: rustfmt the sketch dimension command
* Cap the entities one call may project
A dimension projects the model references among its entities into the
sketch, one link and one resolve each, and the loop had no cap: a single
request could make the engine resolve thousands of model edges before
the dimension refused the list. The count is now refused before anything
is projected, and the projection loop stops at the same limit the
Project command uses.
* Sketch dimension on a model edge: use the sketch store after the store refactor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The cursor correction tries the constraints' free directions a whole step at
a time and took a step as soon as the cursor's distance fell, by any amount.
Along freedom that can't reach the cursor (the far end of a line held only
by its direction), retracting onto the constraints still moves the cursor by
rounding, so such steps were taken: the end walked away a step at a time, and
a line measured by an angle could shrink to nothing, as in #7635. A step now
has to move the cursor itself by more than the solve's tolerance.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6237
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: save, switch, export and import input and interface settings (#6237)
A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).
- Preferences > General > Settings profiles: choose the active profile to
apply it, Save, Rename, Delete, Export... and Import...; a note shows when
the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
the control channel, palette and scripts; the engine checks the parameters,
the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
unknown keys and unreadable values, caps sizes, never switches, and never
panics. Each preference is applied through prefs::set, so a value this
computer refuses keeps its current one and is reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)
New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences snapshot: compare the toolbar, favourites and profile too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: keep a command's several keys (#6237)
Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8927
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: a pre-selected sketch line lying on a body edge goes in as that edge (#8927)
With a finished sketch shown, a click on a body edge that one of its lines
lies on picks the sketch line. Fillet and Chamfer take edges and no sketch
curves, so the pre-selection found no input to fill: the tool opened with
Edges empty and the selection was dropped, and only a second click with the
tool open (which picks the edge) made it work.
When nothing in the dialog takes a pre-selected sketch curve but an input
takes edges, look for the body edge the curve lies on from end to end
(display polylines, with room for a curved edge's chord sag) and take that
edge instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Preferences > Graphics > Viewport gets a Field of view row under Perspective view: the UI kit's
slider in degrees, 15 to 90, dragged or typed and kept to whole degrees, enabled only while
Perspective view is on. The preference is perspective_fov, in radians (default 0.6, about 34°,
so the default view draws exactly as before), and Restore Defaults puts it back.
One place decides the angle the view is drawn with: SolveApp::view_fov(), the preference with
Perspective view on and 0 with it off or while a sketch is open. A saved value outside 15°-90°
reads as the default. projection and fit_bounds read it (fit_bounds' second hard-coded copy of
the 0.6, tan(0.3), now goes through Camera::half_height), and so does the headless fit.
perspective_view() stays, as view_fov() > 0, so #4291 needs no change.
When the angle changes from one perspective angle to another, the camera's distance scales by
tan(old/2) / tan(new/2), with a running view animation's ends, so the target keeps its size and
the slider changes the depth, not the zoom. prefs::follow_view_fov does it once per frame and
after ui.prefs, Cancel and Restore Defaults; a parallel view keeps the last perspective angle,
and while Render is open the camera is Render's own, so the change waits for the design view.
The Render workspace's Perspective check box turns perspective on at the preference's angle,
not π/4; a saved render setup keeps its own. ui.prefs takes perspective_fov and refuses values
outside the range; ui.camera reports the angle the window draws with, and checks a replayed
camera against it, so its reply still replays. Field of view is in en, ar, de, he, ja, ko, vi and zh;
the ui.prefs settings list in docs/control-protocol.md and the guide's tour describe it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8865
* parameters.add: a parameter with no unit takes the design's units (#8865)
A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.
A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8912
Co-authored-by: Cursor <cursoragent@cursor.com>
* View cube: rapid clicks add full turns from the in-flight target.
Match arrow-key retargeting so a second cube click turns from the glide destination instead of the mid-animation camera (#8912).
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Problem: a design saved before body names were pinned (#6403) is pinned by its first command
that changes it, as part of that command. Undoing that command went back to the unpinned design,
whose fingerprints no evaluated result matched any more, so the first undo after opening
evaluated the whole timeline again: 63-72 s in the SELENE rover (5,484 features) when opened
from the command line or headless (`Session::opened_at`), 0.08 s with this change. `doc.open`
pinned at the end of the command instead, which kept undo fast but left the design with unsaved
changes on opening.
Solution: `Session::opened_at` pins the names as it opens the design, with the names the file's
bodies have (no result changes, so nothing is evaluated), and takes the pinned design as the
saved one: opening is no change.
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Favorites, User and Model sections stay lined up when only some lists hold a long name (follow-up to #8551).
Co-authored-by: Cursor <cursoragent@cursor.com>
home.settings and ai.connected_toast follow the English change from Settings to Preferences (التفضيلات, as ui.preferences). Hover is no longer rendered as scrolling in the browser and navigation bar options, the Project options dialog label is fully in Arabic, and the trackpad zoom key help says to hold the key.
* claim: #8875
* Text fields: a right-click menu with Cut, Copy, Paste and Select All (#8875)
Every kit text field (dialog and sketch value fields, the sketch dimension
box, canvas value boxes, names, text areas, passwords, read-only text) now
calls one shared ui_kit::text_menu::menu after drawing its editor. Rows are
disabled when nothing is selected, the text is read-only or a password, or
the clipboard holds no text. The edit marks the response changed and gives
the focus back, so owners that commit on lost focus keep the field; a right
press inside the selection keeps it; Esc closes only the menu; expression
suggestions wait while it is open. New message ui.select_all in a pending
locale file; Cut, Copy and Paste reuse ui.cut, ui.copy and ui.paste.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8860
* Timeline: delete after the marker counts and deletes the shown features (#8860)
With the bottom timeline filtered to one component, "Delete N Features After
History Marker" took the marker as a position among the shown features but
sliced the design's feature list with it. N counted features of other
components, and confirming deleted them too, including features before the
marker.
The entry now gets the feature's design position, the design's marker and
the shown positions, and deletes the shown features after the marker; the
label counts the same set. The history beside the browser shows every
feature and passes no filter, so it behaves as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline: look up shown positions by binary search, test the entry before the marker (#8860)
The shown positions are ascending, so a binary search finds each one without
walking the list for every feature after the marker. The test now also checks
that a shown feature before the marker does not offer the entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A segmented control measured its options translated but painted them as
the caller passed them, so the many callers that pass English labels
(the Coil's Circular | Square and Inside | Center | Outside, Revolve's
One Side | Two Sides | Symmetric, Shell's direction, ...) showed English
in every language. Only where the row was too narrow and the control
fell back to its dropdown, which translates, did they read right.
Segments now paint, size, describe and tip their options translated;
the handles keep the option as passed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7435
* Viewport: the 3D mouse, the bridge and drag-zoom stop at the model, like the wheel (#7435)
The wheel and pinch hold the model point under the cursor, so the view
comes up to the surface and stops there. Every other zoom path passed no
anchor, so the 3D mouse cap, the navigation bridge and drag-zoom zoomed
straight through the surface into the body.
A device has no pointer, so the cap and the bridge now hold the model
point in the middle of the view; drag-zoom holds the point under the
pointer, like the wheel. With "Zoom to the cursor" off the old
zoom-through-the-model behaviour stays, as it does for the wheel.
The orbit half of the issue is a design decision and is untouched.
* Viewport: drag-zoom holds the point where the drag started (#7435)
The zoom anchor followed the moving pointer, so the zoom slid away from
what was pressed on as the drag went on. It now holds the press point,
the way the wheel holds the point under the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: turn around the model in the middle of the view (#7435)
The cap and the navigation bridge turned the view around the view's
centre, which after a pan or from far away sits behind the face, so the
part swung away while it turned. They now turn around the model point in
the middle of the view (the middle of the bodies in view over empty
space), and keep it still on screen. Preferences > Navigation > "Turn
around the model in the middle of the view" switches back to the old
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: keep the turning point until the cap is back at rest (#7435)
The point the cap turns around was picked again every frame, so it slid
to whatever came into the middle as the view moved. It's now chosen when
the cap leaves rest and kept until the cap comes back, the way a mouse
orbit keeps the point it started on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: show the point the view turns around (#7435)
While the cap turns the view, a faint ball in the accent colour marks the
model point it turns around, so it's clear what the turn holds still. The
point is now picked when the cap starts turning, not when it only pans or
zooms, so a pan shows no ball.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: orbit is a choice of Traced or Classic (#7435)
The checkbox becomes a two-way choice on the 3D mouse section's form:
Traced turns around the model in the middle of the view when the turn
begins and marks it with a faint ball; Classic turns around the view's
centre as before. Traced stays the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the 3D mouse's Traced and Classic orbit (#7435)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Make model zoom and traced orbit opt-in (#7435)
---------
Co-authored-by: nomadsgalaxy <16734355+nomadsgalaxy@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8899
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Sketch: keep Diameter box when placing a second concentric circle (#8899)
A centre-point circle's press starts drag-to-draw; releasing on the same
centre (or close to the press) must keep the stage-1 Diameter field instead
of resetting it and risking a second on-click that finishes the shape.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* claim: #8352
* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)
sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.
* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)
The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.
* Equation curve: one if for closing the sampled points (clippy collapsible_if)
A held solve applying a constraint, or the edit's own solve, could find a far
solution of the constraints and move points millions of millimetres while
the sketch said solved. Such a result now counts as a failed one: the next
held solve is tried, or the edit is refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7828
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828)
While drawing, the pointer lines up horizontally with the nearest sketch
point level with it and vertically with the nearest one plumb with it, at
the same time, as a dragged point already does; holding H/V with the
previous point still lines up across with another point. Dotted guides run
from the points lined up with (H, V or H+V), and the click adds a
Horizontal or Vertical constraint with each, in the shape's undo step,
unless the sketch already has it.
A click takes the tool out of the app while it runs, so refine_snap
treated every tool as the Line tool then: a rectangle's click could take a
line-extension inference its hover never showed. The tool's points and
kind are kept from the last hover, as the previous point was.
Preferences > Sketch > "Line up with other sketch points while drawing"
(sketch_align_points) turns it off for the old behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: lining up with other points is off unless turned on
Review on #8474: sketch_align_points defaults to off, so nothing changes for anyone who
doesn't turn it on. With it off, a click also treats the tool as before (the Line tool's
inferences), instead of keeping the tool's kind from the hover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8570
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design: pick one of the other open designs, or browse for a file (#8570)
With other designs open in tabs, Insert Design first lists them under the
button: one click inserts a saved one as a linked component; one with
unsaved changes inserts its saved file and the status line says so; one
never saved is greyed out, as there is no file to link. Browse... opens
the file picker, as the button did before, and it still goes straight
there with no other design open.
Preferences > Design > Linked designs > "Insert Design lists the designs
open in other tabs first" (insert_lists_open_designs) turns the list off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design list: sit with the other menus' items, so run_item keeps its doc comment
Review on #8571: insert_design_items had landed between run_item and its comment. The
rebased menu-walk list keeps main's Target::HistoryControls beside Target::InsertDesign.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8100
* History: say why an edited feature behind the marker changes nothing (#8100)
Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).
- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
carries the feature's `warning` (for a rolled-back feature, the one its
constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
the history marker and not built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8639
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch profiles: close the joints near-coincident curves leave open (#8639)
Two free-form curves that lie on each other along a stretch (a DXF that
carries an outline twice, with the same straight sides and different
corners) are cut into sampled pieces whose ends the graph joins into one
node within 1e-4 mm, but the pieces keep their own ends, a few millionths
apart. Only analytic edges were closed at those joints, so the sliver
loops between the two curves stayed open by up to 1e-5 mm, more than the
1e-6 a solid needs. The region around them took those loops as holes:
extruding it failed with "profile loop is not closed" and it drew no
fill when picked, so it looked unselectable.
Close a line's joint in each finished loop: line to line at their middle,
a line onto any other segment's end. On the reporter's DXF the band
between the outer two rings now extrudes (110.5 mm2 by 2 mm = 220.9 mm3),
and the zero-area slivers no longer form profiles (221 -> 216).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8863
* Sketch: the status line after a dimension is in the interface language (#8863)
The Dimension tool built its "Dimension applied" status sentences (new
parameter, renamed parameter, plain value) and the driven-dimension note
with English format! strings, so they stayed English under a translated UI.
They now come from the catalog (one pending locale file: en, ar, de, he,
ja, ko, pl, vi, zh), with the typed parameter name passed in as is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8861
* History: Delete on a selected feature deletes the selection in both timelines (#8861)
With several features selected, Delete in a selected feature's menu deleted
the whole selection in the bottom timeline and only that feature in the
history beside the browser, which offered the selection as a separate
Delete Selected Features… entry.
Both menus now use one Delete entry: the selected features when the
right-clicked one is among them, labelled "Delete N Selected Features",
else that feature alone. The history beside the browser no longer adds its
own Delete Selected Features… to a selected feature's menu, since the entry
above covers it; folder menus keep it. The single-feature delete helper had
no callers left and is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: a feature's menu leaves out Delete Selected Features… by a flag (#8861)
A right-click on a feature outside the selection selects that feature
first, so in a feature's menu the clicked feature is always selected. A
flag that says the menu is a feature's says the same without the lookup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8006
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts library: button head cap screws, ISO 7380-1 (#8006)
Insert Part offered the socket head cap screw but no button head, so a
design using button heads had to stand in a cap screw and accept the
wrong head. A button_head_cap_screw family now sits beside it, taking
the same parameters from the ISO 7380-1 table over M3 to M16.
The head is a new Head::Dome: the shank and the head revolve as one
outline, with the rim at dk, a short cylindrical flank, the arc of the
crown, and a flat top around the socket, so the hex socket stays a plain
cut on a plane. The standard draws the flank and the flat but dimensions
neither; they are 0.15 k and 0.7 s, and the comment on those constants
records what that costs against the standard's crown radius r1 and why
neither other fractions nor r1 taken as given does better. dk, k, s and
t are exact, each checked against three reproductions of the table.
Insert Part, Change Part Size and the bill of materials need no change:
they read the families and their table rows from parts.library.
The wider fastener request is issue 7692; this is only the one family
from it, and leaves the rest of that list open.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts: format after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: the Button head cap screw family name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Components: copy and paste bodies and components between designs and components (#3390)
Squashed for the rebase onto main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3511
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paste New: copy from a design other than the one pasted into
`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.
From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.
Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: paste bodies and components copied in another design
`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
appearances, materials, joints and motion inside them; joints to the outside stay behind.
Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: copy in one design, paste in another
Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.
The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.
Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: what is selected wins over a design row picked earlier
Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put the Paste from Another Design label in the pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: unground the placement before moving it (a design's first part is grounded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop locale keys main already folded into en.json
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Paste from Another Design in the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7409
* Keyboard Shortcuts: the read-only list says so and leads to the editable page (#7409)
Home › Keyboard shortcuts and Help › Keyboard Shortcuts open the
Shortcuts page read-only, in the Preferences window with its sidebar and
Cancel/Apply/OK, so it looked exactly like Settings › Shortcuts with
Import…, Reset All and recording missing. The read-only page now says
"Read-only list: shortcuts can't be changed here." and has an "Edit
shortcuts" button that turns the same page into the editable one.
Strings in assets/locales/pending/shortcuts-read-only-note.json (en, ja,
zh). Harness test opens it both ways, checks the note, clicks Edit
shortcuts, and finds Import…, Reset All and a recordable binding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew and Vietnamese for the read-only shortcuts note
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8864
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: with Orbit, Pan or Zoom lit, a press held still keeps the highlight under it (#8864)
A mode lit in the navigation bar, or a held Space, owns drags, not a still
press (#8438), but the hover pick counted any left press under such a mode
as navigation and dropped the highlight, so the line under a Select Other
hold went dark until the list opened. Only a preset's left-button binding
or Ctrl+left orbit navigates from the press on now; a lit mode's drag
still drops the highlight once it starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)
Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Select Other: label curves from Intersect as intersected (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #8692
* Browser: remember the folded card across runs, optional reveal on hover (#8692)
The browser card's fold (the chevron in its header) is now a preference,
saved with the other layout state, so the next run starts the way the user
left it. Preferences > Interface > Layout adds Shown / Reveal on hover: the
browser then stays out of sight until the pointer comes over its place or
the thin tab at its left edge, fading in like the navigation bar's Hide
until hovered, and stays while the pointer is inside or a menu, drag or text
edit started from it is open. It never folds in that mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: move the reveal-on-hover messages to a pending locale file (#8692)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8306
* Timeline: joints in feature folders (#8306)
timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
* claim: #8862
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Enter after `pi mm` keeps the unit, not a longer name (#8862)
A unit after a name or constant multiplies it, as after a number (`pi mm`
is pi millimetres), so it is a complete word there: the longer names are
listed unarmed and Enter submits what was typed. A unit at the start, or
after an operator or bracket, stays a prefix as #3664 chose.
Whether Enter completes is now worked out again every frame, unless a key
armed the list. It was kept from when the list first appeared for a word
and caret position, so it went stale when the text before the word was
replaced, or when the box took the focus before the names were gathered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7023
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status bar: switch the mouse mapping from a menu (#7023)
The status bar gets a mouse-mapping button beside the units. It shows the
current mapping, and a click opens a menu of the mappings above the bar.
Picking one sets what Preferences > Navigation sets for it (bindings, wheel
direction, middle double-click, right drag orbits) through
choose_nav_preset. Nothing changes while the status bar is off (the
default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4176
* Preferences: mouse-wheel zoom speed (#4176)
A 0.25x to 4x multiplier for each wheel zoom step, applied in
navigation::handle so every canvas uses it. The 3D mouse keeps its own
speed. Values outside the range are refused when set and reset to 1x when
loaded.
* Control protocol: wheel_zoom_speed in the sorted ui.prefs list (#4176)
* Wheel zoom speed: its label in the complete catalogs (#4176)
* Arabic: fix the Resize Part hint (tanween style, part list, command name)
* Arabic: navigation bar Edge reads as position, tanween spelling in the geometry budget help
* claim: #8040
* wip: 3D line/spline/point tools (#8040)
* Take sketch.move3d off the toolbar help backlog now that it is agent-only (#8040)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #8794
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Control token: a closing window removes only its own token and discovery files (#8794)
Under Flatpak each instance has its own loopback, so a second window
binds the same port number as the first and writes the same
<port>.token, <port>.pid and current.port in the shared data folder.
At exit the first window deleted them all, unconditionally, leaving the
second window running with no token file a client could read.
remove_token_file now takes this launch's token and removes the token
and process files only while the file still holds it; the process id
can't tell instances apart, as every Flatpak instance has the same one.
remove_current_port also takes the token and keeps the discovery file
while another launch's token file holds that port, and removes
current.pid with current.port (it was left behind).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8835
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a selected text moves when dragged from anywhere inside its frame (#8835)
A drag had to start on one of the text's letters to move it. From the
space between letters, or inside a letter's outline, it found no geometry
and drew a selection box instead.
Off the sketch's own geometry, a drag from inside the selected text's
frame now grabs the text, as one from a letter does. Handles, dimensions
and geometry under the pointer still come first, and outside the frame a
drag from empty space still draws a selection box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Trackpad: zoom with two-finger scroll while holding a key, chosen in Preferences (#8322)
Holding the zoom key turns a vertical two-finger scroll (or a wheel) into zoom at
the pointer, with the wheel zoom's speed, direction and anchor, so a laptop user
zooms without pinching. Preferences > Navigation > "Zoom with two-finger scroll
while holding": Cmd on macOS and Ctrl elsewhere (default), Option/Alt, Ctrl, or
Off. That key with the scroll did nothing before, so no default changes; Off
keeps it that way. Shift keeps its orbit.
* Trackpad zoom modifier: off by default (#8322)
Scroll keeps its usual meaning until a key is chosen in Navigation.
* Trackpad zoom modifier tests: Off is the default; tests that zoom choose Cmd (#8322)
* Trackpad zoom modifier: zoom once alongside the Ctrl+wheel pinch from #8539 (#8322)
A wheel the chosen key claims is no longer also read as a pinch, and a key that is not
chosen keeps main's pinch handling unchanged.
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.
- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
does) but the dialog warns, and the reply lists it under shared.
corner_free looked only in a fixed column at the view's right edge and took
the largest free rect there by area. Next to a tall dialog docked at the
right edge, or the Assistant in the Floating layout, the narrow strip beside
the pane won: the toasts were squeezed into it, their text broke inside
words, and with a wider pane they were not shown at all.
It now tries that column first and then columns ending at each obstacle's
left edge, nearest the corner first, and takes the first free rect that is
TOAST_WIDTH wide and tall enough for a toast, as the frame-rate readout
moves beside a right pane (#6755); failing that, a rect tall enough beats a
wider one too short to show any toast. Without a pane the stack stays
exactly where it was.
* claim: #7688
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Graphics: a background colour of your choice for the 3D view (#7688)
Preferences › Interface › Theme gets a Background row: the theme's
gradient (the default, unchanged) or one colour for the whole application,
filling the view in either theme. The window keeps its own colours, a
picture of the view (`ui.render`) takes the colour too, and `ui.prefs`
sets it as `viewport_background` ([r, g, b] or null).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: add joint-aware assembly Move handles and live motion readouts
* test: improve render job failure diagnostics
* fix: preserve assembly Move compatibility and viewport theme colors
* ci: skip default label sync for fork PRs
* fix: keep Windows CI checks portable after main rebase
* test: cover RTL assembly strings and stable refraction job
* i18n: cover assembly Move in Vietnamese
* i18n: cover assembly Move in French
* fix: complete CGA palette for assembly motion handles
* fix: complete Assembly Move palettes and Turkish strings
* fix: retain assembly move cache answers and toolbar help
* style: format merged assembly Move navigation guard
* fix: align Assembly Move preferences and tests with main
* Fix offline update fixture synchronization and clipped prism intersections
Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
* claim: #8592
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: error and warning marks in the browser and on folded folders (#8592)
In the History "In browser" layout, a feature whose build failed gets the
error icon at the end of its row, one that built with a warning the
warning icon, with the message in the tooltip: the marks and text of the
History on the left. A folded History or Features folder carries the
worst mark of what it holds, and so does a folded folder in the History
on the left. Suppressed and rolled-back features are not built and get
none.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- active_body: take every body's owner in one pass (model_body_components) instead of searching the timeline body by body
- Timeline strip: find each chip's result in a table built once per frame (result_index) instead of a linear search per chip
- 4,880-body design: UI frame 31-32 ms -> 7 ms of CPU; tests pin the active body and the result lookup
Co-authored-by: P'tite Tête <asso@ptitetete.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6c5537df6 jyviko: Kernel ladder: a gate run fails on any case whose status or counts differ from the golden
- ee2a1ea06 jyviko: CI: maintainers' pull requests run the tests, and the reference tests run on pull requests
- b4fcd5910 jyviko: Kernel rig: every area and the ladder as a parallel gate on pull requests that touch the kernel
- 18d2dddac jyviko: Release gate: every check in full and in parallel before a branch replaces main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #8095
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)
component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.
The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)
Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)
Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The wasm compile ran only by hand, so #8227 (a native-only DroppedFile::bytes() call in
crates/ui-egui) passed PR CI and the merge queue and broke the web build on main (#8534).
A merge group that touches the crates below the apps, the web app, the vendored crates, the
manifests, the toolchain or this workflow now runs `cargo xtask wasm`, and `ci` requires it.
Dependency advisories ran only nightly. A pull request or merge group that changes Cargo.lock
or a Cargo.toml now runs `cargo deny --locked check --warn unmaintained advisories`, and `ci`
requires it then. The nightly keeps the full advisories, bans and sources scan.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4127
* Render preview: geometry budget from the device, readable refusals (#4127)
The Render preview refused every scene over a fixed 128 MiB of geometry. On
desktop the budget now follows the device's buffer limit (eight of its
largest buffers, at most 2 GiB; 2 GiB with the usual 256 MiB buffers). The
web keeps 128 MiB.
The product upload runs under its own GPU error scopes: an allocation the
device refuses is reported in the preview instead of reaching the device's
uncaptured-error handler, and the half-uploaded batches are dropped. Buffer
uploads map the buffer themselves so a refused buffer fails the upload
rather than panicking in create_buffer_init.
Refusals name the geometry size and the limit and say how to get under it,
on a theme panel card that stays readable on any preview background.
* Render preview: keep the previous geometry budget behind a preference (#4127)
* Render preview: adapt the device budget to main's GPU upload errors (#4127)
* claim: #5717
* ui(feat): let users choose visible toolbar tabs
Keep Sheet Metal and Weldments visible by default while adding persisted tab visibility controls and restoring specialty tabs for designs that use them.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* ui(fix): respect hidden toolbar tabs in every design
Remove feature-based visibility overrides for Sheet Metal and Weldments. Keep all tabs visible by default and preserve the user choice across feature creation, opening designs, selection and undo.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
The nightly failed every day from 2026-10-16 to 2026-10-28 without anyone noticing. A new
nightly-alert job (scheduled runs only, the only job with issues: write) opens or comments on
one issue, "Nightly CI is failing" (label ci), when a nightly job fails, and closes it when a
nightly passes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7724
* Update now installs the newest release, checked when pressed (#7724)
* Update: close the unmanaged-install test after the rebase (#7724)
* Update: the refresh messages in Arabic, Hebrew and Vietnamese too (#7724)
* claim: #8533
Co-authored-by: Cursor <cursoragent@cursor.com>
* Parameters: show full names in the table and formula popup.
Hover tips carry the full identifier when Name cells or completion rows clip, and the completion list widens for long suggestions (#8533).
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
A new arch job repackages each release tarball as
solidcraft-<version>-linux-<arch>.pkg.tar.zst with makepkg, through the Craft apps' shared
action (storytold/craft-common-actions/actions/arch-package, pinned by commit). The package
is io.tangencylabs.solidcraft, named after the tarball's .desktop file, provides solidcraft
and conflicts with solidcraft-bin/-git. Each package also gets a version-less copy, and
docs/downloads.md links them.
* claim: #8183
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: can sit at the top of the view (#8183)
Preferences > Navigation bar gets an Edge choice, Bottom (default) or Top.
On top the bar sits under the ribbon, its menus open downwards and its
tooltips show below it; the OK/Cancel pair and the axis view move down
below it when they would overlap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: the edge's labels in the complete catalogs (#8183)
ar, he, ja, vi and zh carry every English message; the Edge row's three
labels were missing from them, so `xtask i18n --check` and
`every_complete_catalog_carries_every_english_message` failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
body_appearance_key hashed only the name of a body's assigned material, so
after material.edit changed that material's colour (or an undo or redo
changed it back) the key stayed the same and the viewport kept the cached
old look. The key now also hashes the material's resolved look; with an
unchanged material the cache is reused as before.
* Keyboard shortcuts: a command can have several keys
Click a key on the Keyboard Shortcuts page to replace it, or the + after it
to add another; every key runs the command and menus show the first. One
key is still saved as a string, several as a list. Taking a key over from
another command leaves that command its other keys. ui.shortcut takes a
slot and reports every key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keyboard shortcuts: follow main's search layout; fix prefs test for key lists
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Chamfer at a corner of two lines lying on each other cut both back and
added a line of no length between their ends; lines in line with each
other have no corner either. chamfer now refuses a corner angle of 0 or
180 degrees with Fillet's message, "the lines are parallel" (found by a
local trim fuzzer).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Resize Part: say what it works on instead of a parameter error; Parts opens the library (#8735)
Resize Part (parts.resize) started with no standard part selected, as the
ribbon starts it, ran the command with no parameters and showed
"`component` must be an id or a name". It now says to select an inserted
standard part, and that Scale resizes a body. Parts (parts.library) only
listed the library, so its button did nothing: it opens the Insert Part
dialog. The German and Dutch button labels said "scale" ("Teil skalieren",
"Onderdeel schalen"), like the Scale command: they now say change size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Resize Part: the German label matches the command, and the test checks that nothing ran (#8735)
The German ribbon label reads "Bauteilgröße ändern", the name the command,
its dialog and its messages already use. The hint for a missing standard
part is now one function shared by the ribbon start and the Browser's
Change Part Size. The regression test also checks that the design and its
history stay as they were and no message carries the command's own error,
that a scripted parts.library still only lists the library, and that with a
standard part picked Change Part Size opens on it.
---------
Co-authored-by: semmelrinde <124386289+semmelrinde@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A placement row's menu starts from its component's menu, which takes
Turn Up Axis's enabled state from the component's first placement.
Move/Copy was already set again for the placement right-clicked; Turn Up
Axis and its two turns now are too, so a free second placement can turn
while the first is grounded, and a grounded one can't.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A trimmed circle ended on a line exactly where an arc started on that
line, held there by a point-on-curve tie. Trimming the line away dropped
the tie and left the two ends on one spot, untied. remove_curves now ties
each point held on a removed curve at one of its ends to that end before
the curve goes (found by a local trim fuzzer, 15 -> 12 cases in 2000
seeds).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8480
* Pinch to zoom on touchpad: native Ctrl+wheel pinch zooms the view (#8480)
The viewport's pinch path read only `egui::Event::Zoom`; `immediate_wheel` leaves
wheel events carrying the zoom modifier to egui. Native Linux and Windows
touchpads report a pinch as Ctrl+wheel in points, so the gesture reached neither
path and the view did not move. `pinch_factor` now reads those wheels too, in
every wheel unit and scaled as egui scales them, and `ui.scroll` can send the
same gesture (`ctrl: true`) so scripts and scenarios can replay a pinch.
* fix: finish Ctrl+wheel pinch handling and replay validation (#8480)
* claim: #8561
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: disable Apply until something changed (#8561)
The dialog footer gets a disabled state for Apply (Footer::nothing_to_apply,
Window::apply_enabled): drawn with the theme's dim ink, not clickable, not
reached by Tab and reported disabled to accessibility. Preferences enables
Apply only while something differs from its snapshot (what Cancel would put
back), so it is disabled when the dialog opens and again after Apply.
ui.prefs replies with apply_enabled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8746
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move/Copy: changing Move Type keeps the move made so far, and picks follow the moved body (#8746)
Switching the Move Type reset the values, so the move made under the
earlier type was lost. The dialog now keeps it (`chain`) and the new type
moves the bodies on from there; params() composes the two into one
solid.move (one turn about the origin and a translation, as before).
While the new type's picks are missing, the kept move alone is made.
The new type measures from where the bodies now stand (Free Move's pivot,
Rotate's ring, round-edge centres and axes on a moved body). The picker,
the edge/face highlights, the centre marker and Rotate's axis line follow
the moving body, mid-drag too; a pick on it is taken back by the current
type's own move so it doesn't move with the move it sets. While the
triad is dragged the moved bodies' highlights are hidden and rebuilt once
on release.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8382
* Browser: Show/Hide context menu on origin axis rows (#8382)
Right-clicking an origin axis row (X, Y, Z) now opens its own menu with
Show/Hide (V), through ui.originPart and browser.visibility like the
origin planes' entry. An axis takes no sketch, so Create Sketch is not
offered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Display menu's "Perspective while orbiting, ortho on faces" ran past
the menu's edge: a menu row painted its label at full length. It is now
cut before the row's detail and check, and shown whole on hover, as a
long name in a list is.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): keep selected sketch points highlighted
Add persistent point selection rings while retaining constraint-state markers, with regressions for pointer selection, dialog inputs, aliases and visibility. Fixes#1069.
* Move the sketch point selection tests into the viewport overlay tests (#1069)
Run them through a frame that clears its texture uploads, as the current egui
requires, next to the other overlay tests.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Victor Santos Oliveira <56417388+Vittuu@users.noreply.github.com>
Co-authored-by: Colin Faulkingham <colinfaulkingham@Colins-Mac-mini.local>
Co-authored-by: Cursor <cursoragent@cursor.com>
* Render lights: uniform light list, solo and mute, and the Light editor
* Render lights: Lighting and Light editors to the approved design
* Render lights: the scale-test frame carries the product light list
* Restore the stable Render light mute target on the shared eye control
* fix: validate the viewport BRDF probe with current shader dependencies
* fix: compile legacy lighting controls only for tests
* fix: scope the legacy lighting preset import to tests
* fix: reuse the merged Add Light label and translations
* test: enable the implemented Add Light radial action
* fix: restrict the legacy CPU vector editor to tests
* test: reveal Output before checking Lights browser focus
* test: use the published Browser card rectangle for Output scrolling
* test: reveal Output children before exercising editor navigation
* claim: #8267
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Create menu: family flyouts open beside their row, on hover (#8267)
A family row (Line, Rectangle, Arc, ...) opened its variants as a dropdown
below the row, covering the rows under it. The flyout now opens to the
right of its row, level with it, and on the left only when the right has
no room. Hovering a row opens it, as the context menu's Appearance
flyout does; resting on another row closes it after the shared delay.
The context menu and the Create menu share the flyout timing
(SUBMENU_CLOSE_DELAY, flyout_hover, flyout_leaving) and placement
(flyout_at) in ui_kit::menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
menu_tests::linked_component_opens_its_part_in_a_tab_and_reports_a_missing_source
gave the background open of the linked part 600 frames. Headless frames
are quick, so on a loaded machine (the whole ui-egui suite at once) the
read can take longer, and the test then found the assembly still shown.
It now waits until the part is open, up to 120 s as Harness::settle and
the edit-in-place tests wait for a load.
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #4160
* Sketch Fillet: 3D sketch lines are not offered, and say they can't be filleted (#4160)
The Fillet tool offered 3D sketch lines as picks, and sketch.fillet then
refused them with "`a` must be a line". The tool no longer offers them, and
the command refuses them with "not supported yet: filleting 3D sketch lines".
* Sketch Fillet and Chamfer: refuse all spatial sketch curves (#4160)
* Sketch corner test: give the picked curve its point (#4160)
main added a point to sketch-curve hits after this branch was written.
* Render shot editor: camera and frame controls, aspect presets, guides and the frame overlay
* Render shot: Shot editor and Scene overview to the approved design
* Distinguish Render stage variants from native window frames
* fix: restore library inspection after clearing shot selection
* test: follow the merged Output Check navigation
* test: inspect Check without requiring a preflight result
* test: cancel Shot removal through its shared dialog action
* fix: remove obsolete Inspector stage form after editor integration
* fix: preserve Appearance Advanced when clearing Wear focus
* test: expect the dedicated Check editor from Scene overview
Saving gave no sign that it worked, while an export names the file it wrote.
After Save or Save As, the status line now reads "Saved <path>".
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The dense solve updated each matrix element through bounds-checked get/add;
on slow scripted drags it was most of the time. The same operations in the
same order on row slices give bit-identical solutions, about twice as fast.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4359
* Canvas and Decal say where to click after the image is chosen (#4359)
After picking an image the placement tool started silently, so it looked
as if nothing had happened. Show the tool's placement hint as a toast while
it waits for the click (translated), and end it once the image is placed.
* Canvas: include placement hint in viewport obstacles (#4359)
* claim: #8662
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: typing in a number field edits it instead of searching (#8662)
Type-to-search takes printable keys unless the focused field notes the key
sink. number_field (Autosave every, the Largest file to open limits) never
did, so its digits went into the search.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4193
* Sketch Mirror: an origin axis can be the mirror line (#4193)
Mirror accepted only a straight curve of the sketch. It now also takes an
origin axis that lies in the sketch plane ({axis: X|Y|Z}), projected into
the sketch as a fixed linked line, so the copies stay symmetric to it and
follow the source when it moves.
* Sketch Mirror: use current sketch store (#4193)
In Preferences, letters typed in a drop-down list's own Search box (the
Font list, a 3D mouse's button assignments) went to the Preferences search
instead, which then filtered the page, usually to "No matching
preferences", and closed the list. The Preferences search takes typing only
when no text field held the keyboard on the previous frame, and the
drop-down's Search box never said it did. On the full Interface page the
number fields' focus check covered for it; once a search hid them, as when
the Font row is found by searching for "font", nothing did.
The Search box in searchable_dropdown_with now reports that it has the
keyboard, as the Preferences search box does.
Co-authored-by: Claude <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9008d13f3 jyviko: Surface Extrude: a symmetric distance is the total, as for a solid extrude
- de5c338e7 jyviko: Preferences: keep the older per-side reading of a symmetric surface extrude
- ac70662d6 jyviko: Sweeps: a path through a drawn 3D arc follows the arc, not a spline through its three points
- 7664925fb jyviko: Sketch: Project onto Surface keeps the side the projection meets first, in one curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bb4299e56 jyviko: Tests: a drafted cube side leaves the bottom and the opposite side Kept, the rest Modified
- 29adfd0d7 jyviko: Kernel tests: the barrel's side is the exact surface of revolution of its arc
- 5ada4fc8a jyviko: SMLib: pin 90aabff, a shelled round stays a cylinder and a step wall is ruled as its plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f3b77d71b jyviko: Tests: expectations for the SMLib fixes of 2026-10-29
- 567b764b9 jyviko: Viewport tests: the offset ellipse ring's 512 wall joins are all smooth
- 9d0fb564e jyviko: SMLib: pinned at 60b1c6a: the 43 fixes of 2026-10-29 (tangency-labs/smlib#14–#56)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c93b3ad5a jyviko: Engine tests: SMLib's builds where truck refused or approximated
- b6b59e7b3 jyviko: Naming tests: pieces of one name on a grooved disc, the merged boss wall by its point
- ac52443df jyviko: Ring tests: a cut's volume is the piece it took, not the difference of the ring's volumes
- de606715b jyviko: Placement tests: a body mirrored in SMLib reads back from its record valid
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Render output: Effects and Check sections, Size presets panel and the Check tool chip
* Render output: Sampling, Effects and Check editors as child rows under Output
* fix: restrict legacy Output controls to test builds
* fix: cover status controls and reveal Effects test targets
* fix: include shared quality reviews in copied check reports
* fix: remove the obsolete Effects GPU guard after Wear integration
* Render appearance: click, drag and paint to assign, Pick Up, copy and paste, and Remove
* Exclude the workspace Shots strip from dialog width checks
* Exclude the collapsed Shots control from dialog width checks
* Retain assembly cache listings and measure actual dialog bounds
* fix: handle toast button rectangles in assignment status
* fix: restrict gallery note measurement helper to tests
* test: measure assignment help at the catalogue footer
* fix: share the command revision snapshot after restacking
* claim: #7445
* Color picker: add shared Hex input mode (#7445)
Accept strict RGB/RGBA Hex input while preserving exact opacity,
opaque/PBR restrictions, invalid drafts and existing U8/F behavior.
Keep explicit English fallback entries for the three new Hex messages
in Arabic and Hebrew, which final integration main now requires as
complete catalogs. No Arabic or Hebrew translations are claimed.
The user authorized this feature-only commit after full cargo xtask ci
stopped at the pre-existing geometry nonminimal_bool lint. The same
failure was reproduced without this patch at the published claim and
main. No unrelated lint fix or suppression is included.
* i18n: cover complete catalogs for Hex picker (#7445)
Add the three Hex message keys to Vietnamese in the feature's pending
locale file. Keep the unchanged English source values as explicit
fallbacks; no Vietnamese translations are claimed.
Audit the complete-catalog set (ar, he, ja, vi, zh) rather than only
the first catalog reported by CI. Preserve the existing completeness
test and all picker/Appearance code.
The completeness regression changes from red to green. Full local CI
and wasm checks remain blocked by failures independently reproduced
in clean upstream main; no unrelated fixes or suppressions are added.
* Appearance: use the shared opacity-aware color picker in Render (#7445)
Route the merged Render Appearance editor through the UI-kit picker,
passing exact opacity only for non-PBR looks. Keep a non-editable mixed
label and treat explicitly accepting the first color as a mixed edit.
Remove the external Hex field and duplicate parser, replace its gallery
entry with the shared mixed-aware picker, and update the control contract.
Preserve existing regression assertions and add actual Render UI tests
for alpha edits, precision, invalid drafts, PBR rejection and mixed edits.
Full local CI and wasm were run before this commit and remain blocked
by the separately reproduced unchanged upstream geometry lints and
prefs.bytes wasm error. No unrelated fixes or suppressions are included.
---------
Co-authored-by: mynoc <298906611+mynoc-96@users.noreply.github.com>
* claim: #8086
* Configuration table: a filter in the Add Column menu (#8086)
The + menu listed every parameter, feature suppression and body
material/appearance with no way to narrow it. A filter field now sits at
the top, takes focus when the menu opens, narrows the entries and the Face
Appearance submenu as typed, picks a lone match on Enter and clears when
the menu closes. A click into the field keeps the menu open (plus_header
closes on outside clicks; entries close it themselves), and the list keeps
its full height after the filter has emptied it once.
New kit element ui_kit::menu_filter (glyph, frameless editor, rule) so the
field does not read as an entry; gallery, i18n guard and docs/ui-kit.md
updated. Regression test in manage_dialogs_tests.
* claim: #6756
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756)
wgpu's Dx12Compiler::Auto loads dxcompiler.dll by name, so Windows takes the
first one on PATH. SolidCraft ships none, and DXC 1.8.2505 from other programs'
folders (Obsidian, NVIDIA SDK Manager) crashed every start with
EXCEPTION_ILLEGAL_INSTRUCTION during the viewport shader compile.
solidcraft_gpu::dx12_compiler() now chooses: WGPU_DX12_COMPILER as wgpu reads
it when it names a compiler; otherwise DXC from the dxcompiler.dll beside the
program, by its full path, else FXC. The window, the headless/CLI instance and
the test helpers start with it, and dx12_compiles_with_fxc follows it.
WGPU_DX12_COMPILER=dxc keeps the old lookup.
Fixes#6756
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: points tied only through a removed curve's end stay tied
Removing a curve removed its orphaned end points with their constraints, so
two points made coincident with such an end lost their tie although they
still met: two rectangles' corners on one arc end came apart when the arc
was trimmed. They are now tied to each other before the point goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: keep the tie test with the other trim tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Naming a face swept from a sketch flattened every curve of the sketch to
a polyline and measured its distance to each, for every face. On a sketch
with thousands of curves (a sheet with many cut-outs) that grew with
curves times faces. The curves are now flattened once per feature, each
with its box, and a curve whose box is farther than the best distance so
far is not measured.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Spanish (es-ES): catch up with en.json
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation preferences: name the Shift key through the catalog
Spanish now translates the key name, so the page painted it in English.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7356
* Orbit about the cursor: on an edge or sketch line, turn about the point under the cursor (#7356)
With Orbit around: point under the cursor, a drag that starts on a body
edge turned about the edge's middle, which on a long edge is far from
the cursor, and one that starts on a sketch curve turned about the
centre of the bodies in view. Edge and sketch curve hits now carry the
point under the cursor, which the pick already measured, and
pivot_under uses it. An edge hit's `mid` is unchanged, so selections
still record the edge's middle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8139
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* 3MF export: a component's bodies as one object with parts (#8139)
file.export and file.save_mesh wrote every body as its own 3MF object and
build item, so a slicer loaded a multi-body part as separate objects and
could arrange them apart on the bed. With objects: "component", each placed
component that holds two or more bodies is written as one object whose
<components> are its bodies' meshes, built once, so PrusaSlicer, OrcaSlicer,
Bambu Studio and Cura load it as one object with a part per body, each of
which can take its own filament. The design's own bodies, and a component
with a single body, stay objects of their own. The default (objects: "body")
writes the same file as before.
- io: model_xml_parts and write_3mf_parts write the parts; export_with_parts
maps body names to them. model_xml_with and export_with_quality give the
same output as before.
- engine: mesh_parts reads `objects` (component is refused for formats
other than 3MF); component_parts groups the placed bodies by placement,
each part named after its occurrence (Bracket:1, Bracket:2).
- file.save_mesh passes the parts on when it also sends the file to a slicer;
file.send_to_slicer's own folder export is unchanged.
Fixes#8139.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Render wear: a Wear row and editor for the aging layers
* test: read Wear header text from accessibility label values
* test: restore body picks for Wear header recovery assertions
* Render environment editor: rotation, intensity, backdrop colour and ground through render.environment.set
* Render environment editor: rotation ring in the view with one undo step per drag
* Render environment: Source, orientation, backdrop, ground and atmosphere sections
* Keep segmented controls inside their allocated rows
* fix: compile legacy environment controls only for tests
Where several curves cut at one place, trim pinned the new end onto the
first of them. At the touch point of two circles that was a rectangle side
passing through, and once a later trim removed the side the arc ends were
loose: a trimmed dog bone kept two untied ends.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Coincident: refuse a line's two ends
Making a line's two ends coincident shrinks it to a point; a Parallel or
Perpendicular on it afterwards has no direction to hold and a later solve
could throw points far away while reporting solved, as with a line's own end
as its midpoint (#8562).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Coincident: keep the own-ends test with the other Coincident tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3693
* Fix timeline playback to show each rebuilt feature
* Move History playback into the Inspect ribbon
* Refuse Play History up front when playback couldn't run
Starting Play and the per-frame check that stops it were looking at
different app state, so Play could be accepted during an apply, a delete
check or queued history work and then stop silently on the next frame.
Both now use one playback_blocked check.
The UI also reads the engine's PlaybackAction as the typed enum instead of
matching strings, so a bad reply is an error rather than a quiet toggle.
* Put Play History in the History controls
History now shows five controls in transport order: start, previous,
play, next, end. Play runs timeline.play, so it turns into Stop while
playback runs, same as the ribbon button and the shortcut.
It's on by default (#3688, #3740, #4216). Anyone who wants the old four
controls back can right-click them and pick Hide Play Button, or clear
history_play_button under Preferences > Interface. In a named vertical
History too narrow for five buttons beside its grip, Play is left to the
ribbon rather than overlapping the grip.
* Draw the History Play button as a plain play/pause glyph
The Play button in the History controls now uses the same drawn glyphs as
its neighbours: a filled triangle, and two bars while History plays. The
triangle is bigger than the step arrows so it doesn't read as Forward.
The ribbon command keeps its timeline_play and timeline_stop icons.
* Keep the playback changes clear of PRs queued ahead
Several PRs in the merge queue touch the same lines, so this moves ours
aside without changing behaviour:
- history_play_button and its reset-test row sit with the other History
preferences, not beside view_confirm_corner (#7248 adds status_bar there).
- History keeps main's history_transport_width() for four controls (#6430
and #7459 call it); the Play button's count uses history_controls_width.
- A new or opened document stops playback after dim_view::cancel(), clear
of the line #7819 adds after reset_chat.
- The Play/Stop label swap moves from interactive_command_info, which #7906
rewrites, into the ribbon's command_info.
* Stop playback after the command completes, clear of #6433#6433 rewrites the session.execute line in execute_command, and our playback check sat right under it, so the queue couldn't merge the two. Checking the revision after command_completed does the same job a couple of lines later.
---------
Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ee9fc3793 jyviko: Tests: a torus patch to thicken is cut from SMLib's one-face torus
- ca53656a2 jyviko: Schema tests: an empty face list is checked on the draft, which refuses it
- ab68a3d0f jyviko: View tests: the section cap test draws the cap in the cap colour
- 24bcaca03 jyviko: Engine tests: SMLib's faces, not truck's pieces, in the face counts and measures
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c341006a jyviko: Tests: a cylinder's side and a sphere are one face each, as SMLib builds them
- 6c9c679dc jyviko: Tests: a revolved sheet over one radian is one face, untrimmed over its whole span
- 8075b8f70 jyviko: Tests: a swept point path is its lines, and rails must turn with a cornered path
- b9d65e6bc jyviko: Tests: thicken across a sharp edge extends the offsets until they meet
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3c680d21a jyviko: Geometry: the closest point on a full circle just before its start is found before its end
- 30ceb44e6 jyviko: Tests: SMLib's faces, one per swept segment, closed along a seam, replace truck's halves
- 908bc756c jyviko: Tests: the matchsurf and mixed-fillet helpers read an edge on the curve its interval is on
- 98284eb1e jyviko: Tests: a box thinner than a body's tolerance may be refused instead of getting no certificate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 93bbde86e jyviko: Tests: a script keeps a fillet a parameter makes impossible, a radius below zero
- 913a61329 jyviko: Tests: a tilted cylinder's Intersect cut is checked on the cylinder, not by its mesh's count
- da4f122f4 jyviko: Tests: a face picked by point is found on a block of 256 drilled holes, as on #6720's thread
- d0daee90f jyviko: Tests: a cam's edge is picked on its rim, off the vertex where its circle's seam meets it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ff0dda537 jyviko: UI tests: picks that name one thing, and a thread that names its start
- 2523d13cf jyviko: UI tests: SMLib's cylinder has one wall and one edge per rim; split rims come from two arcs
- b71e5ae6f jyviko: Tests: edges are read on their NURBS forms, a chamfer's chain is its caller's, the cap test's hatch
- 138acad01 jyviko: UI tests: a frame member's volume is compared to the accuracy SMLib measures at
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 319e6b8b3 jyviko: Kernel tests: the chamfer on a tangent wall junction is measured on meshes fine enough
- 68a217d98 jyviko: Reference tests: the loft case is analytic, SolidCraft's correspondence with its closed form
- 73b028b5b jyviko: Kernel: a drafted extrusion of a profile with holes, every wall leaning on the material's side
- b2c5b1f5e jyviko: Designs before format 14: a split's pieces take the names its later features use them by
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a0c13910 jyviko: UI kit: a field's scenario handle is where the field shows
- 271f0c5de jyviko: STEP import: a face's loop through a pole closes its turn, so a dimple keeps its area
- 983b1ca8f jyviko: Sketch projection: a projected face's curves meet at the face's vertices
- 426a505a8 jyviko: Display meshes: tests count the planner's grids; a mesh's outline is one line per straight edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 43c1b7b88 jyviko: UI tests: Isocurve Analysis's engine colour is drawn from the theme's accent
- 7bb5bb3d5 jyviko: Locales: Arabic and Hebrew for the version and section hatch labels
- e657e4086 jyviko: UI kit gallery: entries for the controls added without one
- 6a6cd8f56 jyviko: Sketch: a sketch's bounds reach its circles' and arcs' extremes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 23bfa1cf7 jyviko: Tests: the saved fitted-letters design measures its closed form, its letter as conics
- 0e3f01ec0 jyviko: Tests: a loft cut whose top is the basin's whole outline leaves the walls above as their own body
- b3dfcf1ff jyviko: Tests: an engraved face's letters project as conics, their exact quadratic Béziers
- 367beae69 jyviko: Viewport: the analysis legend stays above the floating History card again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a94a025c jyviko: Tests: freezing rebuilt arc borders gets its rebuild from a notch across the arc
- 5cbfbe35d jyviko: Tests: interference lists the pair of a solid and an imported mesh as not checked
- 5489599c0 jyviko: Tests: a face with no attachment is a rib's wall, whose feature reports no roles
- f5dfb78ee jyviko: kernel: a cut's tool face blocks a planar role only where it enters the result
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a31272194 jyviko: Sketch: an included 3D edge keeps its exact curve from the moment it is linked
- 1fb5e94da jyviko: Tests: Intersect's box outline is compared as lines, and a tilted cylinder's whole rim projects to its ellipse
- 9be29894e jyviko: kernel: a cut by a tool apart from the body is the body itself
- 2b0357a22 jyviko: kernel: two planar supports are one when SMLib would call them coincident
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fcd5f7997 jyviko: Tessellation: a node lying on another chord is untangled like a crossing
- 43ad9d0b0 jyviko: Tessellation: a slit (a side the loops run along both ways) bounds the face on neither side
- 534dffa96 jyviko: Tessellation: the band beside a slit and the sag refinement keep the face on both sides of it
- 7b984936a jyviko: kernel: an emboss's arcs run on their wall's own frame, and its seam is read from the circle's angles
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f9347aca7 jyviko: Tests: the mirrored union's volume held to the two integrals' 1e-8 accuracy
- bb0b146a9 jyviko: Tests: #1510's parts are weighed by their exact volumes, not 1e-3 mm meshes
- d5bd1ebfd jyviko: Bridge: a support surface's shape read about a station in its middle has the right signs
- a6054603d jyviko: Tests: fillet removals from exact volumes; SMLib's rounds match Pappus and the quadrature
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a780de5f jyviko: Tests: the helical groove's removed volume from the cut's exact volume, not a 0.01 mm mesh's
- 80b7ce28e jyviko: Tests: volume checks held to what their measures can tell, not tighter
- a3e42e548 jyviko: Tests: the cap whose loops prism_measure compares is found by its plane, not as the last face
- fad9c44da jyviko: kernel: measure integrates to SMLib's finest accuracy, 1e-8, not 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 666ccd85d jyviko: Tessellation: sag refinement splits a flat triangle's long side and never across an obtuse one's short side
- 2b22b2cbe jyviko: Tessellation: a face's sides are flipped where the triangles lie closer along the surface the other way
- e0d5ee496 jyviko: Tests: thicken and raised-band histories checked as SMLib reports them, Meet edges and seams included
- 39e1dcea0 jyviko: Faceted boolean: a body's own mesh is closed once its faces' shared corners are one vertex
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7ec4b7212 jyviko: Tests: a face's flat area may differ from its surface's by the sails its boundary chords bridge
- 4626f83e5 jyviko: Tests: a sketch curve splits a cylinder's one side face in two, not a half side
- 9e97bc470 jyviko: Tests: a split face without its record exports as the body has it, and the next operation joins it
- 47b1d716d jyviko: Tessellation: a whole sphere's loop starts off its poles when its seam has two segments
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8eb77affb jyviko: Kernel: a body's size counts its edges, so a sphere, cylinder or torus is its own size
- 6a06226ad jyviko: UI tests: the split face's isocurve pieces are each wider than the lines' spacing
- eb40e161d jyviko: Tests: the thread whose display is checked is made as the thread feature makes one, with exact helices
- 71ea626d0 jyviko: Tests: a quarter disc tapered outward builds, and its volume is the exact integral of its sections
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d91d3f2a6 jyviko: Kernel: a body moved by a non-rigid matrix keeps each face's source and paint on that face
- c1ead0fef jyviko: Kernel: a sweep along a smooth path names every wall, and a closed one has no caps
- 6387be309 jyviko: Tests: the high-degree line prism_curve certifies is written at the record's highest degree
- 55f48e4e5 jyviko: Tests: the sample-aliasing trap aliases by its knots, within the degree a record holds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5547cd98a jyviko: Blends: a picked edge is named as the blend takes it, the rim and not the seam
- 1cb713c96 jyviko: Kernel: an extrusion's wall seed marks only the edges nearest it
- db9cf693a jyviko: Kernel: an extrusion's cap is in its own plane however thin the extrusion
- de16a6b99 jyviko: Kernel: a half turn's caps keep their roles when its end plane is its start plane
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f8c2fba07 jyviko: STEP import: FILE_DESCRIPTION and the preprocessor name a Y-up exporter again
- 5cc0d5e9c jyviko: Threads: a metric size without a coarse pitch suggests its fine pitches again
- e0545b2bd jyviko: Measure: an arc edge's angle is its span on the circle, not its NURBS parameter
- ae5dc2416 jyviko: Split Body: a face tool runs over its own surface's parameters
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6a8753443 jyviko: Fill: the height-field fill tries grids up to 64 spans
- dc3d504ba jyviko: geom: a fill patch folds where its normal reverses between neighbours, not where it turns past the middle's
- bac6674ab jyviko: geom: patches about a fill's centre run in the spaces of their own sides, not one space of every edge's breaks
- ea6500559 jyviko: geom: patches about a fill's centre are solved by blocks, their banded interiors eliminated onto what they share
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b389601b0 jyviko: Ruled surface: a strip on a cone is SMLib's revolve of its ruling, a cone face
- 1e7713d1e jyviko: Fill: a patch's edges and vertices hold its fit's gap in SMLib's tolerance model
- 4faee7dd8 jyviko: Fill: the general fill takes a loop of one or two edges in exact pieces of their curves
- c5b038548 jyviko: Fill: its tolerances follow a size that does not depend on where the body is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9095fce42 jyviko: SMLib export: a NURBS edge's interval a rounding past its knots is the NURBS's own
- b68f71a2d jyviko: Fill: a patch's edges are the body's own edges again, circles and ellipses included
- b540faaf5 jyviko: Thicken: a surface turned to its back grows the other way again
- ebb1d843a jyviko: Sweep: a parallel sweep whose path runs along the profile's plane is refused again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60f33f6fc jyviko: Feature walks: Repair Part has its fixture, its gap an input and its body renamed with the rest
- 075f307bf jyviko: UI tests: a shown dimension that breaks a later feature does it with a shell left no room
- 242bbc89f jyviko: Fillet rig: the known-failing list follows the SMLib 7e917f0 pin
- 8515dc1a3 jyviko: Blend tests: a vertical round run on up a top round's end arc (ladder 07-fillets/018) is SMLib's to end, and builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 229739a70 jyviko: Blends: a smooth edge and an unfinished tangent chain are refused saying why; SMLib's unsupported corner is named
- 0ec97c570 jyviko: Blends: tangent propagation off blends the picked edges alone; a refusal says how to change it
- 94d763c83 jyviko: Tests: a round run on through an earlier one by tangent propagation is matched by the same edges together
- a0eaceab5 jyviko: SMLib tests: a round larger than the cube is cut as if its faces went on, at its exact volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d00ad78c jyviko: kernel: a patch builds G0 to G4, and Continuity Analysis reads each seam's middle at the order asked
- 102cde292 jyviko: Kernel rig: patched holes graded by their continuity, at clashing corners and in one sheet
- 7c9a9051d jyviko: Patch: the continuity choice's hover text says the corners stay tangent where the faces round them clash
- ef93b18ed jyviko: SMLib: pinned at 7e917f0: a corner patch tangent to its sides, an unsupported corner named, a torus from a NURBS a whole turn round its tube
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* claim: #7834
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: vertex markers where edges are drawn (#7834)
Each body's vertices (the ends of its pickable edges, once each) show as
small screen-space squares in the edge colour in the styles that draw
edges: shaded with edges, wireframe, and shaded with hidden edges, where
hidden vertices show faintly like hidden edges. Plain shaded draws none.
A marker is a lifted line from the vertex to itself in the body's block,
so it is instanced with the edges, cached with them, and depth-tested
like a highlight band. The existing vertex hover ring stays on top.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport tests: count edge segments apart from vertex markers (#7834)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vertex markers: an option, off by default (#7834)
Adds the Vertex markers preference (Preferences > Graphics, off by default) and draws the dots only when it is on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Open refused a saved model whose text records (a feature's warning, a body or
sketch name) held more than 65,536 bytes, although Save writes them, so such a
design was evaluated again on every open.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: cut dashed lines to the view, so a huge distance can't fill the memory
epaint makes one shape per dash and steps along a line in f32. The
viewport's dashed lines (the Extrude taper handle, Measure's legs, the
fillet radius guide, the inference and snap guides, a sketch text's
frame) were dashed over their whole projected length. With an Extrude
distance of 1e9 mm the taper line was billions of points long: the
frame never finished and filled the memory within a second.
`viewport::dashed_line` dashes a line that lies in view exactly as
before, and cuts one that reaches far off screen to the view (grown by
two dash periods) first, keeping its dashes in phase with its start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: compute a cut dashed line's ends in f64
A line a trillion points long lost its cut ends in f32: they collapsed to one point, and the part in view drew nothing. The new test caught it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two new commands, view.next_tab and view.previous_tab, with Ctrl+Tab and
Ctrl+Shift+Tab as their default keys: they appear on the Keyboard Shortcuts
page and can be rebound or cleared like any other. The window steps along the
tab strip and goes round at either end; one design alone stays as it is, and
a "save changes?" prompt keeps its tab shown. The engine only echoes the
step (no design edit, no undo step); engine.batch refuses them like the
other steps that go to another design.
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5066
* Pattern counts: name a length-unit parameter, refuse fractional counts (#5066)
A count parameter created with a length or angle unit now gets an error
that names it and says to set its Unit to none. A count that evaluates to
a fraction is refused instead of being rounded silently.
A mesh body's row (an imported STL, 3MF, OBJ, ...) now shows a new
mesh_body icon, a triangulated cube in the mesh accent, instead of the
solid body's grey cube. Hovering a body row says Mesh body, Surface body
or Solid body. Body::is_mesh() decides; nothing new is saved.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7744
* Vendor winit 0.30.13 with Wayland touchpad pinch and rotation gestures
The 0.30 Wayland backend never binds zwp_pointer_gestures_v1, and
WindowEvent::PinchGesture / WindowEvent::RotationGesture only come from the
macOS and iOS backends, so a trackpad pinch produces no input at all on
Linux and Wayland (two-finger scroll still works, since X11/XWayland
reports it as a wheel). egui-winit already maps the events to
egui::Event::Zoom and navigation::handle already zooms the camera from
that, so the Wayland backend was the only missing piece.
Upstream the gesture support is part of winit 0.31 (rust-windowing/winit#4338),
which eframe 0.36 cannot use while it still requires winit 0.30, and the
0.30 backport rust-windowing/winit#4778 was closed unmerged. So ship the
same fix locally, upstream-style-applied and stripped of example and test
targets, with its unit tests for the gesture state machine kept under
cargo test -p winit --lib -- pointer_gesture:
- src/platform_impl/linux/wayland/seat/pointer/pointer_gesture.rs: bind
the global (versions 1..=3), one pinch gesture object per pointer,
destroyed before the pointer is released; begin/update/end become the
two events for the window the gesture began over. Two fingers only;
the protocol's scale is relative to the gesture's beginning, so the
event carries the change since the previous update; rotation is
negated to winit's counterclockwise degrees; a non-finite scale is
dropped, and so are updates of a gesture whose begin we never saw.
- seat state wiring: bind the global, track and drop the gesture object.
- wayland-protocols' unstable feature, platform notes on both events,
changelog, patch-section entry in Cargo.toml, vendor/README, and
Linux/Wayland notes in the troubleshooting guide and the UI tour.
Retire this vendoring once an eframe release consumes winit 0.31 or
later; the cleaned branch is kept as
https://github.com/purp0w/winit/tree/wayland-pinch-gestures.
* ci: retrigger after flaky occurrence-cache test
---------
Co-authored-by: Francisco das Chagas Danta Filho <dev@dantas-filho.me>
Parallel, collinear, equal or concentric of a curve with itself was added
as a constraint that always holds; perpendicular or tangent to itself was
refused as geometry that can't move. These six now refuse one curve
picked twice, as Coincident already does for a point, and leave the
sketch as it was. Constraints already in a design are untouched.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7919
* Pick by the body's own size, not the camera's distance (#7919)
The occlusion test that decides whether an edge or vertex is hidden by the
face in front allowed a slack of `scene_radius(app) * 0.02`, and
`scene_radius` ends with `.max(app.cam.half_height() * 2.0)`: in an
orthographic view that is `0.016 x camera distance`. Zooming out grew the
slack without bound until a whole body fitted inside it and every edge behind
the front face counted as visible, and edges and vertices are offered before
faces, so they won the pick. Cutting the slack from the scene also gave a
small part in a large assembly a tolerance many times its own size.
`pick_slack` now takes a size and returns the mesh's own chord tolerance with
room to spare, `DisplayQuality::Coarse.chord(size) * 4.0`: a facet sits at
most a chord tolerance inside its surface, and that tolerance is already a
fraction of the body's size, so the slack no longer moves when the camera
does. Each body is tested with its own bounding box, which the loop already
holds. `view.pick` does the same, so an agent's pick still matches a click on
the same pixel. Sketch profiles and origin planes belong to no body and keep
a scene-level value, `scene_pick_slack`.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
A line's own end held at its middle shrinks the line to a point. The
solve accepted that, and a later angle, tangent or parallel on the line
had no direction to hold: its points went millions of millimetres away
while the sketch still reported solved. MidPoint now refuses the pick,
saying why, and leaves the sketch as it was. Constraints already in a
design are untouched (only the command refuses).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4750
Co-Authored-By: Claude <noreply@anthropic.com>
* Extend: pick two curves to extend both to where they meet (#4750)
`sketch.extend` gains a second form: `curves: [a, b]` names two lines or
arcs, with an optional `at: [[x,y],[x,y]]` naming the end of each to grow
(default: the end nearest the meeting point). Both grow along their own
line or circle to where they cross and the two ends are joined with one
Coincident, in one undo step. `moved` is the joined end's id.
- Where two crossings are possible (line and arc, two arcs) the one with
the least total growth is used; a tie is refused.
- A curve that already reaches the point does not grow. An end held by
other geometry or a constraint stays and gets a new line or arc.
- Parallel or collinear lines, curves that never meet, a point behind the
chosen end, the same curve twice, splines, ellipses, infinite lines,
offset geometry and malformed `curves`/`at` are refused with no change.
- The single-curve form is unchanged; its code is shared through
`grow_line` / `grow_arc`.
Canvas: in the Extend tool, Shift-click two curves. Shift goes through
the tool modifier registry as the new `extend_pair` action, and Extend
turns off Shift's midpoint snap. Escape drops a pending first pick. The
sketching guide describes the gesture.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7893
* Toasts: one stack in the view's bottom-right corner, one width, buttons as in dialogs (#7893)
* Control protocol: toast_place in the sorted ui.prefs list (#7893)
* Toasts: a sketch test clears the status notice before clicking the view's corner (#7893)
The test's line end lands in the bottom-right corner, where notices now stack
and take clicks as they did at the bottom centre; the test is about the circle.
* Toasts: the pattern scenario's circle sits clear of the view's corner (#7893)
After the refit, a circle at y 0 landed in the bottom-right corner, where the
tool's prompt now stacks and takes clicks. The circle moves 40 mm up; the
pattern it checks is the same.
* claim: #8358
* Components: a component named like the design is reachable by name (#8358)
Document::find_component resolved the design's own name to the root component (id 0) before
searching the component list, so a component that shares the design's name was unreachable by
name: appearance.assign reported `no component `CurtainRailPlug`` (the same lookup serves every
command that takes a component by name).
An exact component name (or component id) match now wins over the design-name fallback; "0" and
"root" still always mean the design.
Regression test: a_component_named_like_the_design_takes_its_appearance_by_name (fails on main
with the reported error, passes with the fix).
* claim: #8521
* feat: give History feature folders their own symbol
A folder of features in the History on the left drew the same folder icon
as the Browser's folders. It now draws feature_group, a pile of history
chips with the front one in blue, and so do Add to New Folder and Remove
from Folder in the History's menu. Other uses of folder keep it.
* claim: sheet.* typed parameter schemas
* Sheet metal feature commands: typed parameter contracts
sheet.flange, sheet.perforate, sheet.hem, sheet.fold, sheet.unfold, sheet.refold and
sheet.convert read their parameters by hand, so a misspelt key or a value of the wrong
shape was ignored or failed late, and describe_command had only prose for them.
Each now has a contract in schema/sheet.rs, checked in front of the unchanged handler,
and returns FeatureResult. The values no shared type fits (sheet-edge points, an edge
flange's edges, a fold's line and fixed point, the flange type, the positions, the
relief shape and the perforation pattern) get types that call the handlers' own
readers, split out of cmd/sheet.rs, and give their messages. The rule's values
(thickness, K-factor, bend radius, reliefs) stay out of the contracts: the handlers
refuse them, and strict refuses them as unknown keys.
A test passed a nested `base` object whose `sketch` the flange never reads; it now
names the sketch at the top level.
Part of #2829 (#6581).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal contracts: a further bend's angle stays as lenient as before
The flange handler reads a `then` bend's `angle` that is no expression
(`true`, a list) as left out and bends it 90 degrees. The rebased
contract had moved that check into the shared reader, so the handler
refused such a call even with the check off.
The reader is back to the handler's behaviour, and `ThenSteps` is the
stricter one, as the schema guide asks: warn reports such an angle and
strict refuses it. Tests cover the reader's leniency, the type's
refusal and the three check levels on one flange.
Part of #2829 (#6581).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: the history in the browser, as a History layout (compact mode)
Settings > Interface > History gains "In browser" (view.history_layout dock: browser):
neither timeline is shown, and each component's History folder lists its sketches and
features in history order with the marker. Dragging the marker rolls the history back
through timeline.roll_to; Find in Timeline reveals the feature in the browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser history: sketches listed under their feature as in the vertical History
With Sketches: Under their feature, the history in the browser (compact mode) lists each
sketch under the first feature built from it, through the shared history_rows (#6494)
without reference rows: same rule, same fold key, so switching the History layout keeps
what is open. A drop above a row rolls back its listed sketches with it. Selecting a feature
lights the rows of its sketches, and selecting a sketch lights the features built from it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: with the history in the browser, the Sketches folder starts closed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser history: sketch rows have the eye of their Sketches folder row
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History in the browser: Arabic, Hebrew and Vietnamese for the layout's name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: scroll a long refusal into view with its Create Issue (#8454)
A dialog's refusal comes last in its fields. When the fields fill the
dialog, the refusal sits under the fold: an Extrude Cut that the kernel
refused showed only its first line, "boolean Cut: the operation failed: no",
and no Create Issue. The dialog now scrolls a new refusal into view once:
a refusal on OK at once, a preview's once no field is being typed in, so a
field never moves away while it is typed in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: decide the reveal in one function and test it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Lists many PRs add to: no written lengths, one file per theme (#7747)
* xtask lists: the fixed-table allowlist in order, each with its own reason
* Lists: the wide-character blocks and the drawing scale presets as slices too (#7747)
* Lists: the drawing units test reads UNITS as a slice (#7747)
A copied body transfer was pasted like any feature and given the target
component as its owner. A transfer belongs to the component it moves bodies
to, so the saved design was refused on open ("body transfer owner must match
its destination"), and a pasted transfer had nothing to move anyway: the
copies go into the component they are pasted into. Paste now leaves body
transfers out and says so in its notices; a clipboard of only transfers is
refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8410
* Preferences: reverse trackpad orbit direction (#8410)
Add "Reverse trackpad orbit direction" under the pan settings in
Preferences > Navigation. orbit_reverse defaults off, so older settings
files load unchanged, and turns the Shift + two-finger orbit the other
way on both axes, as natural scrolling flips both. Pan, zoom and mouse
orbiting are untouched. Labels in en, ar, de, he, ja, ko, vi and zh as
a pending locale file; orbit_reverse in the control protocol's sorted
settings list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8542
* CI: report missing translations for complete catalogs before review (#8542)
`cargo xtask i18n --check` already reads the pending locale files and fails
when a complete catalog lacks an English message, but no workflow ran it, so
the gap surfaced only in the full test run after approved-for-ci. It now runs
in Format and repository checks, and CONTRIBUTING names the complete catalogs.
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)
A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.
- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
type, optional colours, other elements skipped; counts checked against the
file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
colours, units, rigid placement, size and colour), stored as a binary
container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
viewport fallback; messages in en, en-GB, ja, zh, de and ko.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: colour by the file, one colour or height, from the UI (#5151)
The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.
Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: integrate format registration and viewport caches (#5151)
* Point clouds: satisfy current UI audits and document comparisons (#5151)
Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.
* Point clouds: isolate translations for current main (#5151)
Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.
* Point clouds: fit the rebased code to main's GpuTarget and Frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare point clouds when reusing placement-independent results
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: complete command help and required translations (#5151)
* Point clouds: size the save cap from the raised limit after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Engine: one sketch store for the sketch commands (W38.0, #5425, no behaviour change)
The sketch commands found and kept the sketch they work on in about forty places, each its own
way. They now go through one module, cmd::sketch_store, so a drawing session (W38a/b) can put
sheet and view sketches behind the same calls without the commands changing again.
- target: the command's `sketch` param or the sketch being edited (target_sketch, moved).
- active: the sketch being edited, if any. The thirteen commands that need one keep their own
refusal text; unifying the three texts is a separate, visible change.
- read and write: the only calls from the sketch commands to Document::sketch and sketch_mut.
- update: change a sketch on a copy of the document and keep both, the edit the text and link
commands made by hand (sketch.text, sketch.edit_text, the projection, intersection and
include links, sketch.fit_curves_to_section, sketch.break_link). As before, those paths
neither solve the sketch nor run its checks.
- checked: the checks an edited sketch passes (the periodic splines), shared by edit_solved and
sketch.offset.break.
edit and edit_solved stay in sketch.rs and load and keep their sketch through read and write.
Imported text, snap points and the face projections keep their own shape (a text that can't be
linked is skipped, snap points copy the document only when one is needed) through read and
write. The reads and writes that are about the design's own sketches stay as they are, each on
a line marked `// design-only:` (Redefine Sketch Plane, a joint's curve, a motion trace's wire,
and the session's live drag, parameter edits and `created` diff).
A source scan, each_sketch_command_goes_through_the_store, fails when a command reads or writes
a sketch, or asks for the active one, anywhere but the store or a marked design-only line in the
files that work on the design's sketches. Every existing sketch test is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: the sketch store's scan also catches the active sketch taken as a value (#5425, review of #6336)
The scan only caught `active_sketch.ok_or`, so main's `let Some(id) = s.active_sketch else …`
could have come back unseen (0xlillith's review). It now also flags the value-read forms:
`) = s.active_sketch` (let-else and if let), `=> s.active_sketch` (a match arm),
`s.active_sketch.and_then(` and `s.active_sketch.map(`. State checks (`is_some`, `is_none`,
`== Some(`), assignments and snapshot copies stay allowed.
The wider scan found five commands that hand-rolled the store's `target` rule (a `sketch` param or
the sketch being edited). They now call `sketch_store::target`: sketch.inspect, sketch.glyphs,
sketch.export_dxf, inspect.curvature_comb and inspect.minimum_radius (their `curves` form).
Their refusals become target's:
- no `sketch` and none being edited: "no sketch is being edited" (was "no such sketch (and none
is active)", or "no such sketch" for sketch.glyphs);
- an unknown name or id: "no sketch `X`" (an unknown id used to reach "that sketch is not
evaluated");
- a feature that is not a sketch: "`X` is not a sketch";
- a `sketch` that is neither an id nor a name (true, a list, an object): refused,
where it used to fall back to the sketch being edited. A null `sketch` still means none given
(the scenario harness sends one): target now reads it that way for every sketch command
(target_reads_a_null_sketch_as_none_given).
No test, doc or schema text named the old wording; the params docs ("sketch?: id|name (default
active)") still hold.
The two remaining value reads, the default sketch for a feature (features.rs) and the sketch a
measurement prefers (measure_sel.rs), go through `sketch_store::active`, with no change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: a number in `sketch` is an exact sketch id, never a name (#5425, review of #6336)
`sketch_store::target` turned a JSON number into text and looked it up with
`Document::find_feature`, which falls back to a name when no feature has that id. So
`{"sketch": 999999}` could pick a sketch named "999999" whose id is something else, and export
or inspect it. sketch.export_dxf, sketch.glyphs and the two curvature inspects read an exact id
before they moved onto the store; the other sketch commands (the old `target_sketch`) and
sketch.inspect read a number as text.
One rule now, for every command that takes `sketch`: a number is an exact id (`as_u64`, then
the feature with that id); text is an id written out or a name, as before. A number that isn't
a whole number of 0 or more (negative, fractional) is refused with "`sketch` must be an id or a
name"; an id no feature has gives "no sketch `N`", as before. Nothing in the tests, docs,
scenarios or examples names a sketch with digits, so nothing relied on the old fallback.
Test (sketch_store): a sketch named "999999" with another id. sketch.export_dxf, sketch.glyphs
(with another sketch being edited, for its enabled check), inspect.curvature_comb and
inspect.minimum_radius (with a real curve id) refuse `{"sketch": 999999}`, find the sketch as
`"999999"` and by its own id, and refuse -1 and 1.5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: MidPoint finds its sketch through the store too (#5425, after #5011)
#5011 added a caller of the old `target_sketch` (MidPoint's `line_stays`, which swaps a point
picked after its line) after this branch's base. It now reads the sketch through
`sketch_store::target` and `sketch_store::read`, as the other sketch commands do, so a number
there is an exact id too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: standard parts fix their sketch's entities through the store (#5425, after #6376)
#6376 (a standard part's sketches are fully defined) reads the sketch being drawn straight from
the document's features, after this branch's base. `fix_all` now takes it from
`sketch_store::active` and `sketch_store::read`, as the store's scan requires, with the same
result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: Toggle Diameter and Delete on a profile find their sketch through the store (#5425)
Two sketch commands landed on main after the store: sketch.toggle_diameter (#7729) still
called the removed sketch::target_sketch, and Delete on a picked profile (#7107) read the
sketch straight from the document. Both now go through sketch_store (target and read), and
the store's source scan passes again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch dimensioned: use the sketch store's target after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch dimensioned: read the sketch through the store
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Render output: size presets, Check list, Copy, progress pill, R and Esc, and the result viewer
* Complete Output GPU help translations and format choices
* Remove Output size labels already present in catalogs
* fix: compile the legacy finishing controls only for tests
A pattern of bodies copies them about an axis in its component's frame,
so its copies of a root body depend on where that component is placed.
placement_digest never counted a pattern's bodies, so moving the
component kept the cached copies. Read each body through placed_body,
as Combine does.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8237
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch text: right-to-left lines are ordered and shaped (#8237)
A line with Arabic or Hebrew letters is split into display-order runs by the
Unicode bidirectional algorithm (unicode-bidi) and each run is shaped with the
font's own rules (harfrust), so letters join and marks sit where the font puts
them. Lines without right-to-left characters keep the glyph-by-glyph layout.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch text: a line break inside a right-to-left line keeps the text after it (#8237)
The bidirectional algorithm ends a paragraph at a line break; every
paragraph is shaped now, not only the first, so measuring such a line
counts all of it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #7295
* Sketch Dimension: choose horizontal or vertical from the two points' box (#7295)
Two points or a slanted line got the aligned distance whenever the text
was between the perpendiculars through them, so straight above the middle
of nearly level points was aligned and horizontal needed a thin wedge.
Now the text position relative to the box the two span picks the type:
inside it or in its outer corners aligned, above or below horizontal,
beside it vertical. This is the rule midpoint pairs already used, so both
share auto_orientation().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Dimension: aligned across the line, horizontal or vertical by the pull past an end
Review on #7355: the aligned length must stay the default, and the box
rule shrank its zone to a thin strip on a shallow line. Now `auto` is
the distance between the two points everywhere across from them
(between the perpendiculars through them, and a tenth of their distance
past), and only a clear pull past an end changes it: up or down from
that end gives the horizontal distance, sideways the vertical one. The
two meet on the diagonals through the end, so both zones stay wide on a
shallow or steep line. Midpoint pairs keep main's box rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
DroppedFile::bytes exists only on native; the web build stopped at
take_theme_drops. Native keeps reading the file there. On the web, the
shell already reads every drop asynchronously before the app sees it: a
drop over Preferences' Import tile now arrives as a theme and goes to
prefs::import_theme_bytes, instead of being opened as a design.
Ctrl+W (Cmd+W) closes the active design, asking first when it is
unsaved; closing the last one shows the start page. In the web app a
capture-phase keydown listener keeps the browser from closing the tab
while a design is shown; on the start page the browser closes the tab.
Ctrl+W joins the keys the app reserves, and the tab menu's Close shows it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4071
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Define a named parameter inline from any value input (#4071)
Any value input, typed or sent as a command's expression parameter, takes
`name = expression` (or `#name = expression`): the design gets the user
parameter `name` with that expression, and the input stores `name`, in the
command's one undo step.
- doc: the lexer skips a definition's `name =`, so until the design stores
it the text evaluates as its expression and commands read and check it
like any value. `Document::define_inline` then turns every stored
definition (feature inputs and placements, dimension parameters, sketch
pattern and text values, joint and coupling values, sheet metal and
plastic rules, canvas planes) into a user parameter, the unit following
how the input reads a bare number. A taken, reserved or empty name, two
different values for one name, and a definition in a parameter's own
expression or a configuration cell are refused; all or nothing.
- engine: `Session::execute` runs it after any command whose parameters
hold definition-shaped text; the reply has `defined` (the first name,
as `sketch.dimension` already gives) and `definitions`. A refusal fails
the command, which leaves the design as it was.
- `parameters.change` with `new = expression` renames the parameter it
changes (a dimension's or feature input's own, references following)
and sets it; when the value is just `new`, it sets `new`. `changes`
refuses definitions. `expr.evaluate` reports `defines`.
- UI: lengths keep the name when the design unit is applied; sketch text
sends a definition as typed and previews only its value; the box corner
and offset Distance 2 use the value; fields whose command keeps no
expression (sketch scale, move, chamfer) refuse a definition with the
way to name it. The dimension editor says which parameter it named.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The hint "at the face" had no catalog message, so it stayed English in
every language. Add it in English and the 26 other catalogs, and check
that every plastic dialog hint has a message.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Select Other: a still hold opens the list while Orbit, Pan or Zoom is lit
With a mode lit in the navigation bar (or Space held), holding the left button still on overlapping geometry opened nothing, and the release then selected the top item as a click. The viewport treats such a mode as owning left drags: a plain click still selects, and every other check on the mode sits on a drag. The hold was the one place a press that had not moved counted as navigation.
The hold is now cancelled only by a navigation that has started (the drag past the click distance), so it behaves as it does with no mode lit. The hint and the user guide already describe the hold without that condition. A preset's modifier binding (Maya Alt, Alias Shift+Alt, HFSS Alt) and Ctrl+left orbit still cancel it at the press, as before: holding such a chord is a gesture to navigate.
Tests: holding still with each mode lit opens the list, picks from it and a click still selects; a drag under each mode still moves the view and opens nothing; Maya's Alt chord held still does not open the list (it fails without the preset check).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Select Other: the press that opened the list does not move the view
egui calls a press a drag once it has lasted 0.8 s. With Orbit, Pan or Zoom lit, the press that opened Select Other at 0.5 s then became an orbit, pan or zoom, and moving the pointer to a row turned the view under the open list. While the list is open, a primary press no longer takes the lit mode.
Test: a press held past 0.8 s that then moves keeps the list open and the view still, for each mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8318
* Preferences: the File view entry and the search field carry the window's name (#8318)
The File view's entry that opens Preferences said "Settings", and the window's
search field said "Search settings" / "No matching settings", while the window
title, the File menu and the help texts around the app say "Preferences". The
strings that name the window or point to it now use "Preferences"; ids unchanged.
Translations of these ids followed the English source and keep their wording
until the language teams catch up.
Tests: home::tests::the_entry_that_opens_preferences_carries_the_windows_name
and prefs_search::tests::the_search_field_names_the_window_it_searches fail on
main ("Settings" vs "Preferences") and pass here; the prefs_search:: and home::
suites pass, and the full solidcraft-ui-egui lib suite passed in `cargo xtask ci`.
* claim: #6901
* Feature windows choose Join, New Body or Cut from what the material touches (#6901)
Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join
Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preference: Choose the operation automatically (on by default)
Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference
Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Operation check: a closed window's check stops; the icon audit doesn't choose
A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Box placement test: the window keeps its New Body
The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Join pieces: read the target lists leniently after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7717
* Stand-up offer: a note only when the part seems to lie on its back (#7717)
* Stand-up note: an unclear shape still gets the note
* Stand-up note: a Don't ask again button, as the dialog has
* Control protocol: the stand-up settings in the sorted ui.prefs list (#7717)
* Stand-up note: the control import test asks as before (#7717)
The test checks the caller's `up`, so it sets the setting to Ask and every
file from another program still gets the offer.
* claim: #6645
* Sketch: Center Point Arc follows the cursor clockwise or counter-clockwise (#6645)
The centre-point arc always ran counter-clockwise from its start; a
clockwise arc needed a typed negative sweep. The tool now tracks the
signed turn the cursor makes round the centre after the start is placed,
and its sign sets the direction of the preview, the live Sweep box and
the created arc.
sketch.arc.center_point takes `clockwise` with a clicked end: the arc is
stored counter-clockwise from the end and reversed, as a negative sweep
is, so the start keeps its radius and `<id>.start`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: keep the old counter-clockwise centre-point arc behind a preference (#6645)
Preferences > Sketch gets "Center point arc follows the cursor's
direction" (center_arc_follows_cursor, on). Off, the arc runs
counter-clockwise from the start whichever way the cursor went, as it
always did. Its strings are a pending locale file (en, de).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: Japanese and Chinese strings for the centre-point arc preference (#6645)
ja and zh are complete catalogs, so the new preference's label and tip
need them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sketch: Arabic, Hebrew and Vietnamese strings for the centre-point arc preference (#6645)
Arabic, Hebrew and Vietnamese became complete catalogs on main, so the new
preference needs them too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Russian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Russian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8284
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch on a face: a round's edges that end a hair apart still close (#8284)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch on a face: test both ends of a rounded loft end to end (#8284)
A square lofted to a circle with its side edges rounded, as in the
report: a sketch on either end face takes the whole face. Without the
fix the circular end fails with "face projection has a branched
boundary". Also drops a redundant term from the join tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #8301
* Timeline: the feature menu's suppress item follows the reader's language (#8301)
Suppress Features / Unsuppress Features were raw literals. Menu::label()
translates a label only when a catalog entry carries it, and none did, so the
item stayed English in every language, the Japanese UI included.
The two labels are now the messages timeline.suppress_features and
timeline.unsuppress_features in a new assets/locales/pending file: the English
wording is unchanged, and the complete catalogs (ar, he, ja, vi, zh) plus de and
ko carry the translations.
cargo test --profile ci -p solidcraft-ui-egui --lib -- timeline::tests::the_feature_menu_suppress_item_follows_the_language
fails on the claim commit (the Japanese menu paints the English literal) and
passes with the change.
The Appearances panel's 27 messages for Dutch, Hungarian, Galician,
Malay and Norwegian Bokmål, which their merged Render batches missed,
and the shots strip's 7 newer messages for those and ten more.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
In the Sketch > Create drop-down a plain row such as Point was drawn
200 pt wide, the minimum width its labels fit in, while a family row such
as Slot filled the menu. The menu was as wide as the one-line pin hint in
its footer, so the plain rows' hover background and pin stopped short of
the right edge.
The Create menu now sets its width from its rows before drawing them, as
the other panel drop-downs do, and passes that width to the plain rows
instead of recomputing it over a subset. Family rows fill the same width
and the footer hint wraps inside it. The overflow menu's plain rows take
the width of all its commands in the same way. A family's submenu still
sizes its variants to their own labels.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Most browser menus show V beside Show/Hide, but the V key always ran
toggle_visibility, which acts on the selection. A right-click on a body or
sketch row also selects it, so the two agreed there; a right-click on the
Bodies, Sketches or Origin folder, a group, the component or an origin plane
does not, so V did nothing, or flipped a body selected earlier, and left the
menu open.
With a menu open, V now runs that menu's row whose shortcut is V, through
run_item as a click does, and closes the menu (context_menu::press_shortcut).
A disabled row takes the key and does nothing. With no menu open, or a menu
without such a row, V still acts on the selection (#4128, #4409: V stays
selection-based).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8329
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Save As offers the open file's own name (#8329)
Save As, Save As JSON and Save a Copy proposed the design's name, the one
stored inside the file. Copies of a file under other names keep the
stored name, so "Sample Plate-bug.solidcraft" was offered
"Sample Plate.sc", the same as its sibling, and one replaced the other.
Session::save_as_name() offers the stem of the open file unless the
design was renamed since it was opened or last saved, and the design's
name otherwise (a new design, or one renamed in the Browser).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
Each cap is tangent to both concentric sides, so its radius is already
half the gap between them and the two caps are equal. The Equal the arc
slot added between them was always redundant; it is no longer added.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A button is 60 points tall and its label starts 32 points down, so two
lines of the label font (31 points) ran 3 points past it. Two-line
labels now take the font size plus 2 points per line and start higher
when they would still run past the button, leaving 2 points below.
One-line labels are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8020
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Insert Part: the Length list opens on the default length (#8020)
The list carried an item called "Default" above the standard lengths. It
never said which length it stood for, and one of the lengths below it
always was that length, so the list offered the same length twice under
two names. Change Part Size has always listed concrete lengths.
The item is gone and the list opens on the length the part would be given
anyway. The default cannot be worked out in the dialog, because it is not
one rule: a cap screw or bolt takes the first standard length at or above
2.5 d, a set screw the first at or above d, a dowel pin the first at or
above 4 d. parts.library now reports default_length beside each size's
table values, taken from the shape the engine would build, and the dialog
selects it; the test checks that report against what an insert without a
length is actually built to, for every size of every family.
Leaving the length alone behaves as "Default" did: a new size resolves
the list again, so M6 to M12 moves the selection from 20 to 30. A length
chosen by hand stays until the size changes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Insert Part: the labels test skips default_length too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5638
* Sphere, Torus and Cone dialogs: place them by their centre or base (#5638)
The Box and Cylinder dialogs already had typed X, Y and Z placement
fields; the Sphere, Torus and Cone dialogs now do too. Sphere and Torus
show Placement: Center and take a picked point like the Box; Cone shows
Placement: Base Center like the Cylinder. The fields take expressions,
and Edit Feature shows and keeps the stored centre or base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With the dialog buttons at the bottom, the spinner shown while the preview
computes or OK applies was painted on its own after the footer: at the
card's left edge and one control height up from its bottom. The footer
insets its row by 12 pt at the sides and 10 pt above and below and centres
the buttons, so the spinner sat outside that inset and about 10 pt below
the buttons' centre line.
Panel::feature now draws the spinner through the footer's left slot, so it
shares the row's inset and vertical centre, in the space the footer already
leaves for it before the status text. The rect is published as
dialog:footer:spinner, and a panel test checks it lies in the footer row,
at its left inset and on the OK button's centre line. The spinner in the
title row (buttons at the top) is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: translate the 132 messages main gained since batch 1 (batch 3)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: the Appearances panel's 27 Render messages
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: translate the 199 messages main gained since batch 1 (batch 3)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: Spoed for a thread's pitch, as the catalog's Pitch (review)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Render inspector: selection-following appearance panel with the look chain, Applies to and edit controls
* Render appearance: Glass, Clear coat, Maps, Saved optics and Reflections sections
* Update Render navigation tests for dedicated editors
* Exercise Focus keyboard protection through the Library search field
* French: translate the 205 messages the catalog was missing
The French catalog lacked 205 of the English messages, so parts of
Preferences, the hole presets, the slicer messages, the Render
workspace and the Assistant showed in English. They are translated in
one pending file, with the catalog's terms (Esquisse, Fonction,
Bossage, Appui, Clip, Prise de vue) and its non-breaking space before
: ; ? and !.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate the 90 messages main added since (the navigation bar's)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A variable font (one file for every weight, as most web fonts ship) has no face marked bold,
so Bold failed with "has no bold face". Without a bold face, a face whose wght axis reaches past
semibold is now set to weight 700. ttf-parser gets its variable-fonts feature for that.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8155
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* DXF import: an elliptical arc comes in as exact conic arcs (#8155)
A partial ELLIPSE (how Fusion, and SolidCraft's own DXF export, write an
elliptical arc) was read as a degree-3 spline fitted through 16 samples,
which strays from the ellipse between them: 0.84 mm on a 300-degree arc
of a 200 x 40 mm ellipse. It is now read as exact rational-quadratic
conic pieces of at most a quarter turn each, which the sketch keeps as
conics. A conic arc written by SolidCraft's DXF export now reads back as
the same conic.
The arc's sweep is taken with rem_euclid instead of a loop that added a
turn at a time, which ran for billions of turns on a start angle of 1e11.
sketch.drawing_bounds and the width/height sizing of sketch.insert_dxf
measure a conic by points along it, not by its apex, which can lie
outside the curve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8265
* Move/Copy: a triad drag ends where the button was released (#8265)
A frame carries all the input queued since the last one, so the release
that ends a drag and further pointer movement — the hand keeps moving as
the button goes up, or input is queued during a busy frame — arrive
together, and the frame's latest pointer position is already past the
release. The drag's final change was read from it, so the value, the
preview and the command both jumped to wherever the mouse had got to;
pressing Enter right after the release closed the window first, which is
why that worked around it. Rotate and occurrence moves share the triad.
The final change now comes from the release event's own position, which
the raw input carries (egui's processed pointer events drop it). The
regression test sends a release at 20 mm and a move to 30 mm in one frame:
30 mm before, 20 mm after.
Fixes#8265.
* claim: #4086
* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)
* Translate the file size limit strings
* Size limits: design files are .sc now, .solidcraft still read
* Romanian: translate the Render workspace's 733 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Romanian: the Render tree's switch hint is a verb
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6651
* test(#6651): a list parameter of the wrong type is refused
A list parameter such as a cut's `targets` or an export's `bodies` loses entries without an error: a value of the wrong type reads as an empty list, which most commands take to mean "every body". The regression test drives the engine the way a user does: two bodies, a box cut that crosses both and is meant for one of them, and a `targets` of the wrong type. The command must refuse it and leave the design as it was.
* fix(#6651): a list parameter refuses a wrong type instead of losing entries
A list parameter of the wrong type was read as an empty list, and an empty
list means "every body" to most commands: a cut meant for one body cut every
body it touched and the command reported success.
A wrong type is now an error that names the parameter, the offending entry
index and the value it got. A list longer than 10000 entries is an error
instead of being cut short. `null` stays absent, as the schema contract says,
and a plain string is still a list of one. The 80 call sites now propagate the
error instead of losing entries; the commands that take feature keys, which
may be named or numbered, read them with their own reader.
* claim: #7861
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch dimensions in a colour of their own in every theme (#7861)
Dimension lines, arrows and values were drawn in the same near-black or
near-white as fully constrained sketch curves, so they were hard to tell
apart in a busy sketch. Every theme now sets its own dimension colours:
plum on Light, orchid on Dark, and a hue from each built-in theme's own
palette. Colour vision tests measure them against the curves, the
construction lines and the conflict red, and a new test holds every
shipped theme to readable, distinct dimension colours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Closing from the background: the window comes forward to ask about unsaved changes
Right-click › Close on the taskbar while another app had the focus showed the
"save changes?" prompt in a window that stayed behind, so the close seemed to do
nothing. When the close stops at the prompt, the window now asks for the focus
(unminimizing it first) and for the user's attention, which is what native
Wayland offers (xdg-activation) and marks the taskbar entry where the system
refuses the focus. A window already in focus is left alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* X11: ask the window manager to raise the window as a user action
winit's Focus asks as an application, which KWin's focus-stealing prevention
refuses for a window last used before the switch away: it raised nothing and,
since the attention request was then skipped, did not even mark the taskbar.
On X11 send _NET_ACTIVE_WINDOW with source 2 (a direct user action) through
x11rb, which restores a minimized window too; native Wayland keeps the
attention request. Moves the logic into come_forward.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Come forward once the taskbar menu is gone, without flicker
KWin raised the window, then the taskbar's closing context menu handed the
focus back to the previous app 2 to 11 ms later, so the window only came
forward some of the time; asking again made it flicker. Ask 120 ms after the
close instead, and again only when the focus is taken back within 50 ms of a
request (a slow menu) or never came. A later switch away is the user's own and
the window stays behind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: show center and midpoint alignment guides
Add transient per-viewport horizontal and vertical guides with a sketch preference. Related tests, native UI, WASM and supplementary Linux checks pass. Full CI remains blocked by unchanged Windows engine dead-code Clippy errors.
* Sketch: complete alignment-guide translations
* Tests: compile chosen-program mutex only on Unix
* claim: #6020
* Measure: number the two picks in the view (#6020)
"1" and "2" beside the measured line's ends, as the panel lists the
picks, each just past its end so it stays off the line and its length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #6975
* Create Sketch: the grid previews the plane under the pointer (#6975)
While Create Sketch waits for its plane, the grid now lies on the origin or
construction plane under the pointer, so the sketch's plane shows before
the click. A plane's browser row under the pointer lights that plane in the
view, and previews it the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Create Sketch: the planes at the top of the History preview too (#6975)
main now draws the Origin rows at the top of the vertical History as well
(history_rows). Hovering a plane there lights it like its row in the browser:
the plane is handed over the same way the hovered bodies are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Links: update linked designs that changed while the assembly's tab was away
A design coming back to its tab compares the modification time and size of its linked
design files with what they were when it went to the background, and runs Update Links
on the worker thread for those that changed: saved in another tab, another window or by
a checkout. Preference update_changed_links (Design, Linked designs) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the assembly guide says linked designs update when their tab returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: Vietnamese strings, now that vi is a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: remember what each design last read, so an update that fails is tried again
A design's linked files are now recorded as the design last read them: when Update Links reads a
link without an error, or when the link is first seen. Coming back to the tab reads again what
differs, one link per run, so a file that cannot be read holds up no other and is tried again
the next time, and a part changed while the assembly was shown is taken up on its next return.
Closing several tabs together reads nothing on the way, and the web build, which keeps no file
times, looks at nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: no read during a save-changes prompt, records for adopted designs and missing files
A tab shown to answer "save changes?" reads no link before its save, and Cancel there or on a
batch lets the tab left in front read what it skipped. A design opened in place of the blank one
records its links at once, a link whose file is missing is recorded as missing so it is read when
the file comes back, and a read queued for a design that is no longer shown by the time it starts
is dropped. More changed links than can wait at once are read on the next return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: edit a linked component in place, with the assembly around it
Activating a linked component opens the design it comes from in a tab of its own, with the
rest of the assembly drawn faded around it where the component sits, so the part's own history,
browser and commands are at hand. Finish Editing in the browser saves the part, goes back to the
assembly and closes the part's tab when the edit opened it; coming back to the assembly updates
the changed link (or Finish Editing runs Update Links when that is turned off). Update Links in
the part also reads the assembly's links again, off the window thread, and redraws the assembly
around the part; a result for an assembly changed meanwhile is dropped with a message.
The part is an ordinary tab, so saving, autosave, recovery, closing and quitting treat it as any
other design. The model scene's ghost triangles are now drawn (only the preview's were).
Preference edit_linked_in_place turns it off. Builds on the update of changed links when an
assembly's tab returns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a double-click opens it, Activate only activates
A double-click on a linked component edits it in place, in the browser as on a face in the
view (around the placement clicked), and the component's menu gets Edit in Place. Activate and
the browser's radio button make it the active component as they always did, so a linked
component can still be activated without opening its design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Double-click on a component's face: edit a linked one in place, activate any other
A double-click on a face in the view activates the component the body belongs to, at that
placement, as a double-click on its row does; a linked one is edited in place. Bodies of the
design itself or of the active component are left alone, and so is a double-click with a
modifier. One preference, double_click_components, covers both gestures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from review
An edit whose part never opens is forgotten instead of starting on a later open of the same
file, and the web build starts the edit after its synchronous open. Finish Editing goes on only
for a save into the linked file and in the part's own tab, waits for a "changed on disk"
answer, and says so when the part was saved elsewhere. Showing the assembly no longer drops a
refresh, which now records the links it read so coming back reads nothing twice. The faded
assembly is worked out once per picture, a bad mesh index skips its whole triangle, and the
last two status texts come from the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Finish Editing on the MODEL tab and the mouse's back button
Finish Editing is a command now, component.finish_edit, with its schemas: the app window
answers it, anywhere else nothing changes, as with view.fit. While a linked design is edited in
place the MODEL tab ends with a FINISH EDITING panel, pinned at the right as FINISH SKETCH is,
with a new left-arrow icon; the browser keeps only the line naming the assembly. The mouse's
back button, or a keyboard's Back key, finishes too unless a dialog, tool or sketch is open.
The assembly guide describes editing in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second review
Saving the assembly waits while it reads its links for the part
Finish Editing waits for dialogs, tools, sketches and prompts open in the part, also when run as a command
The assembly reads the edited part explicitly when it does not check its links on its own
The FINISH EDITING panel cannot be customized
A tab opened by an edit stays that edit's to close when the part is entered again
The mouse's back button finishes editing; the keyboard's only while no text field has focus
Refreshing the assembly keeps its selection and active component
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third review
component.finish_edit run as a command opens nothing and answers with an error when it cannot finish; engine.batch and engine.script refuse it
A double-click or Edit in Place while a dialog, tool or sketch is open in the assembly keeps it open
What changes in the assembly while it reads its links without changing its document stays: picks, activation, components dragged but not captured
Showing the assembly while it reads its links starts no second read
A new or opened design in the part's tab ends the edit
Finish Editing keeps the part's tab open while its agent chat runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Update Links run as a command in the part refreshes the assembly too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the ribbon button reads Finish Edit, as Finish Sketch does
A bare "Finish" took the catalogs' surface-finish translation (German "Oberfläche").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the fourth review
Finish Edit waits while the part's agent is in the middle of its turn, instead of keeping the tab of any chat open
A part saved while its assembly refreshes is read again when the edit finishes: the refresh records the files as it found them
A double-click on a linked component while something is open in the assembly says so instead of activating it
Commands are recognised in any spelling the engine takes, so engine.batch and engine.script cannot slip Finish Edit through
Update Links run as a command refreshes the assembly from the control channel only, not for the app's own reads
Moves of components the refresh removed are not carried over, and a refusal is one message
The command description and the guide say that the command does not save the part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the command is Finish Edit, as Finish Sketch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a command to start it, and fixes from the full review
Added component.edit_in_place {component, path?}: the double-click and Edit in Place in the menu run it, and as a command it asks nothing, so a network location not allowed yet or a design open elsewhere makes it fail instead
Finish Edit asked by the part's own agent finishes once that agent's turn ends; the button still waits for the turn
The parameters and design properties panels, with text typed and not applied yet, hold up entering and finishing an edit
A refresh is not taken up under an undo, a queued command or a feature still being computed in the assembly
Refusals say what holds them up (a refresh, a file being read or written) instead of nothing
The browser strip names the assembly that is refreshing, not any assembly
The schema description says the command does not save the part
Korean strings for every new message
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second full review
The MCP batch tool refuses component.edit_in_place and component.finish_edit as steps instead of sending them one by one
Edit in Place asked while the assembly's agent is in its turn opens the part once the turn ends; a double-click then is refused rather than stopping the agent
Both commands answer queued: true when they wait for the agent's turn, and stopping the agent forgets what it queued
An undo, a queued command or a delete check running in the design holds up entering and finishing an edit
A refresh redraws every edit of the assembly, the parts in other tabs too
In an assembly never saved, a double-click activates the linked component as before
The control and MCP docs list the new batch and script refusals, and the commands list every way they fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third full review
The MCP batch tool refuses the two commands however a step names them, an execute step too
A queued Edit in Place is checked fully when asked for, a second one is refused, and both queued requests wait for what runs in the design instead of being dropped
Disconnecting the agent forgets what it queued, as stopping it does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: help text for the Finish Edit button
main now requires help for every toolbar command (#7134), and Finish Edit
is one. Written in every language the branch's catalog carries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Add unit tests for fill.rs's two ray-casting predicates, which
fill_general.rs relies on to decide which parts of a surface a loop
covers: a point inside/outside a square and an L-shaped (non-convex)
loop, documenting how inside_loop resolves points on an edge or
vertex; and segments that cross, stay apart, touch at an endpoint,
or are collinear with and without overlap for segments_meet.
Closes#38
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* Render: one sRGB transfer function, geom::srgb, for the hand-written copies (#7161)
Twelve places wrote the sRGB encode or decode formula out by hand (doc's glass
recipe, engine's render library, glTF import, the PNG film, photographic and
presentation output, the ray tracer's image, the stage, the surface decoder,
texture normalisation and the theme's contrast check). They now call
solidcraft_geom::srgb: encode/decode on 0..1 values, encode8/decode8 for 8-bit
codes. render::surface::srgb8_to_linear stays as a re-export, so its callers
are unchanged.
Same results: the module's tests compare it bit for bit with the formula as the
callers wrote it, over all 256 codes and a dense sweep of linear values plus
the knees, out-of-range values, infinities and NaN, for each way the callers
clamped (after encoding, before it, or not at all), and decoded values either
side of the decode knee, where no 8-bit code falls.
One change: glTF import encoded in f32. Over every f32 in 0..1, 218 of
1,065,353,217 values sit on a rounding tie that f32 got wrong and now give the
neighbouring code (f64 gives the nearer one).
Left as they are: render/job/image.rs (replaced by exact tables in its own
change), the tests and the starter-pack validator that keep their own copy as
an independent reference, and the WGSL shaders (they can't call Rust).
Fixes#7161
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the sRGB codes of five callers that had no test of their output (#7161)
The glass swatch, a library surface applied as a plain appearance, glTF's
fallback for a colour channel that isn't a number, a stage panel and an empty
pixel in presentation output each get an assertion with their sRGB codes worked
out by hand. A planted wrong conversion at each is now caught by that test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Editing a body Mirror from the history showed Object Type Features (the dialog starts from
the timeline selection, the Mirror itself, which turns pattern objects into features) and
dropped its saved Join. The editor now sets the objects back to Bodies for a body Mirror or
Pattern and restores the Mirror's combine.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8226
* Theme: paste a theme into the Import tile (#8226)
Ctrl/Cmd+V on Preferences > Interface imports a copied theme file, the tile's
menu offers Paste theme, and a theme file dropped on the tile imports instead
of opening as a design. Pasted text that is not a theme keeps its usual
meaning. The tile reads "file or paste".
* Theme paste: the new strings in Arabic, Hebrew and Vietnamese too (#8226)
* Dutch: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hungarian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hungarian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Galician: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Galician: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: Fewer ambient occlusion samples while the view moves (#7165)
- Draw AO with 8 samples while the view moves, 32 once it has held still for 0.25 s
- Share the settle tracking with adaptive supersampling and repaint when it settles
- ui.screenshot waits for the full-quality frame (at most half a second)
- Test the sample choice, the uniform slot, and ghosting at both counts
* fix: Set the AO sample count in the scale test frame
- scale_tests.rs, new on main, builds a gpu::Frame without ao_samples
- Use AO_SAMPLES, as the other still-frame builders do
---------
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* Logo: an option to draw it in the theme's accent
Preferences > Interface > Logo: Theme's colours (the default, as before) or
Accent, three shades of the theme's accent. ui.prefs logo_accent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Logo: US spelling for the option's label, as upstream's English catalog uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translations for the new options in the five complete catalogs (ar, he, ja, vi, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6032
* View angles: an optional readout under the orientation gizmo and a command to set them (#6032)
View > View angles (also Preferences > Graphics, or view.angle_readout) shows the
view's pitch, yaw and roll in degrees and Ortho/Persp under the axis view or cube,
updated live; off by default. Clicking the readout opens a small card to type
exact angles, which runs view.apply.
The angles are the camera's own (Camera::view_angles / with_view_angles), about
the up axis: yaw is the heading of the line of sight (Front 0, Left 90, Right -90,
Back 180), pitch the eye's elevation (Top 90, Bottom -90), and a positive roll
turns the model clockwise. view.apply documents this convention and now refuses a
pitch past +/-pi/2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4451
* fix(#4451): the body colours travel with the OBJ file
An OBJ export left the colours of the design behind: the mesh file named no
material, so every body arrived in the reader's default grey. The export now
writes a material library (.mtl) next to the mesh file, with a material per
body, and the mesh file names that library with mtllib and picks the material
of each body with usemtl. Every path is checked before anything is written,
the library goes first and the mesh file last, so a mesh file never names a
library that is not there. Only the colour of the body travels: the colours of
single faces and the transparency of a body stay out, as a face colour needs
material groups inside one object. The export that writes one file stays
material-free, so it never names a library it does not write.
A mirror's or pattern's copy of a face carries its seed's construction certificate, and on a
combined body that certificate finds the seed's face. Capturing an attachment never checked
that the certificate finds the picked face, so a sketch on the mirrored half sat on the
original. The capture now falls back to the face's exact history name when the certificate
names another face, as docs/face-attachments.md describes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7587
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Naming: name a long history of one body from the oldest up (#7587)
A body's face names are worked out from the names of the body it was made
from, recursively. After a few hundred features in a row whose names
nothing asked for, reordering or moving an earlier feature re-evaluated
them all and the first name lookup (a fillet at the end) recursed once per
feature, overflowing the 1 MB window-thread stack on Windows. Name every
16th earlier version oldest first so no lookup recurses through more than
16 of them; the names are the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The version right of Report a bug had a fixed 60 points, enough for v0.25.1 but not for a
release candidate such as v0.21.0-rc.1, whose text was painted over the button. The bar now
measures the version and reserves its width plus a gap, never less than before. The extra
width comes only from the document tabs' spare room: where they would keep less than one tab,
the version is hidden, as on a narrow bar.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8104
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows: an export over a file another program holds briefly waits for it, up to 2 s (#8104)
write_atomic replaces the target with one rename. Windows refuses that rename
(os error 5 or 32) while another program, such as an antivirus or indexer
scanning a file written a moment earlier, has the file open without delete
sharing. The retry gave up after 127 ms of waiting, which a scan under load
outlasts, so render.export and library.export over an existing file failed
with "Access is denied".
The retry now keeps doubling its wait up to 250 ms, about 2 s in all. If the
file is still held after that, the error says the file is in use by another
program, followed by the system's own message. The old file stays whole
throughout, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Saving over a read-only file fails at once, and says why Windows refused
Access denied (os error 5) is also what Windows gives for a read-only or
ACL-denied target, which waiting does not fix. A read-only target is now
refused without the 2 s wait, with "the file is read-only". Any other refusal
that outlasts the wait says another program may have the file open or it is
read-only, followed by the system's own message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch dimension: a slot's two caps measure the overall length (#7464)
* Sketch dimension: slot caps need tangent sides, not just shared lines (#7464)
* Sketch dimension: slot caps measure the centre-to-centre distance (#7464)
---------
Co-authored-by: Dane Doubell <2853036+danedoubell@users.noreply.github.com>
* claim: #8097
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert design: file names get the width the size and actions leave (#8097)
The web app's "Files in this browser" window listed stored files in an egui
Grid sized from cell content: the wide action buttons took most of the fixed
window width, the name and size columns were cut, and the rest was empty.
Add ui_kit::name_list on the kit's table grid: the name column takes the
width the other columns leave, the other columns are as wide as their widest
cell (measured as drawn, a changed measurement discards the frame), and a
name is cut with an ellipsis and its full text on hover only when it does
not fit. The window is a little wider (still capped at the browser width).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5694
* Redefine: the reply reports the features it rebuilt (#5694)
timeline.redefine builds the edited feature and the features after it in its trial session;
the session's own evaluation then only takes those results from what the trial kept, so the
reply reported that second evaluation and read as "nothing was rebuilt" although the geometry
changed. Report the trial's rebuild, plus anything the session still had to compute itself, as
timeline.edit reports the same change; `restored` keeps counting only genuine reuse of earlier
results.
Tests: redefining_reports_the_features_it_rebuilt fails before the change with
{"feature": 2, "recomputed": 0, "restored": 2} and passes after it;
redefining_computes_the_later_features_once still guards the single computation (the reply
doubles if the kept results are lost).
* claim: #5240
* Preferences: reverse vertical pan direction (#5240)
Add "Reverse vertical pan direction" beside the horizontal setting in
Preferences > Navigation. pan_reverse_y defaults off, so older settings
files load unchanged, and flips the vertical part of two-finger pan on
every canvas through navigation::handle, independent of the horizontal
setting. Labels in en, ja, zh, de, and ko.
* Reverse vertical pan: strings as a pending locale file, with Arabic, Hebrew and Vietnamese
* Control protocol: pan_reverse_y in the sorted ui.prefs list (#5240)
* Italian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: sizes, the ISO 5457 border and its marks (#3875) (#5108)
* Drawing sheets: sizes and the ISO 5457 border (#3875)
A sheet is a paper size and an orientation: ISO A0 to A5, Letter, Legal,
ANSI A to F, architectural A to E1, or a custom size (finite, above 0 and
at most 5,000 mm a side), landscape by default and either way for every
size.
A border profile is the rule for its border, and layout() works it out
for a sheet: the frame inside the margins, and the reference fields with
their labels. The ISO profile has a 20 mm filing margin on the left and
10 mm elsewhere, a 0.7 mm frame, fields of 50 mm out from the centre
lines with the corner fields taking what's left, rows lettered from the
top without I and O (AA, AB and on past Z), columns numbered from the
left, and an A4 sheet labelled on its top and right only. A profile can
divide the frame equally instead, or have no grid.
The records sit in geom, next to the section records, so saving,
rendering and export can all use them. Nothing is saved or drawn yet:
there is no command and no format change. Margins that leave no drawing
space, values that aren't finite, fields outside 1 to 1000 mm, more than
200 equal fields and unknown JSON fields are refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: ISO 5457's centring and trimming marks (#3875)
A drawing border profile now also holds the grid reference border and the
centring and trimming marks, either of which can be left out. The ISO
profile follows ISO 5457:1999 (read in its identical adoption,
IS 10711:2001):
- the grid reference border 5 mm outside the drawing border on every
side, with the field labels between the two;
- four centring marks on the sheet's centre lines, from the grid
reference border to 10 mm inside the drawing border;
- at each corner a trimming mark of two overlapping 10 x 5 mm
rectangles, in the margin outside the grid reference border.
The labelled sides are now a rule worked out for each sheet: ISO 5457's
(the top and right of A4, all four sides of the others) or fixed sides.
So one profile labels every size correctly. validate() checks what
doesn't depend on the sheet, for when a profile is read; layout() calls
it, then checks the rest against the sheet.
Refused:
- a grid reference border that isn't finite, is negative or is wider
than a margin;
- a centring mark that isn't above 0, would reach past the sheet's
centre lines, or is on a drawing border those lines miss;
- a trimming mark that isn't above 0, is wider than it is long, is
wider than the margin left outside the grid reference border, or is
longer than half the sheet's shorter side.
The grid rule's JSON is now externally tagged ("none",
{"from_centre": {"field_mm": 50}}), as the sheet size is, so an unknown
field is refused in every form; the internally tagged "none" ignored
one. Nothing is saved yet, so the shape change costs nothing.
The names follow the glossary, and ISO 5457's "drawing sheets": the
module is drawing_sheet (was sheet, which means sheet metal elsewhere
here), DrawingBorderProfile and SheetLayout (were BorderProfile and
BorderLayout), sheet_border and drawing_border (were paper and frame),
and Sheet::size_mm (was paper_mm). The first part of S1 is still a draft,
so the renames are made here rather than in a commit of their own.
The extra centring marks ISO 5457 asks for on sheets larger than A0
aren't here yet. Still nothing is saved or drawn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: a lighter built-in border, the filing margin a choice (#3875)
Cameron's decisions after seeing the sheet in the app, 2026-10-23:
- No trimming marks in the built-in profile: the filled corner blocks
take a lot of ink. trimming_mark_mm stays, so a profile can still ask
for them.
- Centring marks stop at the drawing border: from the grid reference
border to the drawing border, never into the drawing area (on A4 they
crossed the tables). centring_mark_mm keeps its meaning, how far a
mark reaches inside the drawing border, and now takes 0, the built-in
value, as grid_border_mm already takes 0 for "on the drawing border".
A mark of no length (a reach of 0 with no grid reference border) is
refused.
- Margins of 10 mm all round. ISO 5457's 20 mm filing margin on the
left, for drawings that get bound, is a named choice: filing_margin,
off when not given. On, it stands in for margins.left_mm, which is
kept, and still checked, for when it's off again. The 20 mm is
FILING_MARGIN_MM, and validate() and layout() both take the margins
from one helper, laid_out_margins().
A3 landscape is now 400 x 277 at (10, 10), with eight 50 mm columns.
With the filing margin it is 390 x 277 at (20, 10) again, the same as a
20 mm left margin set by hand. A profile with all three choices on
(ISO 5457's full border) lays out exactly as the built-in profile did
before, and the tests keep the old hand values for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing W23a workshop plate oracle fixtures (#4950) (#4962)
* test(oracle): reviewer-aligned parameterized workshop plate fixtures (#4950)
Independent analytic W23 expected values and seven verified models,
including four R10 corners and the 2 mm tangent top chamfer.
Document accepted Drawing states and commit regenerated docs/oracle.md
from successful workflow run #29 (90/90 pass).
* fix(oracle): correct W23 chamfer centroid and clarify drawing session ownership
* Paper scene: plain records of what is drawn on a sheet (#4890 A1) (#5513)
geom::paper holds what a sheet shows as plain data: groups of strokes and fills, each group tagged
with the object that drew it (an opaque id) and its kind, with one validation pass over a bounded
record count. Seg2's checks and the coordinate rule move into profile.rs so section and paper share
them, and drawing_sheet takes its side and line limits from paper, so each limit is written once.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: centring marks across the whole margin (#3875) (#5554)
The built-in sheet's centring marks now run from the trimmed sheet's edge to the drawing border.
From the grid reference border, as before, a mark was the same length as a grid field mark, and on
A3 it sat on one (the sheet's centre falls on a field edge), so it no longer read as a mark once the
grid reference border's outline is left out (Cameron, after the prototype on #3875).
- DrawingBorderProfile.centring_mark_start: sheet_edge (the built-in's, and when not given) or
grid_border (ISO 5457's figure 5); ISO's full border in the tests asks for grid_border.
- A mark still needs a length: one that stops on the drawing border needs room outside it on the
side it starts from, every margin for sheet_edge, the grid reference border for grid_border.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing sheets: no centring or trimming mark longer than the largest sheet's side (#3875) (#6410)
A border profile capped every length at 5000 mm (the largest sheet's side) but two: a
centring mark's reach inside the drawing border and a trimming mark's length. A file could
give either a huge whole number, such as 18446744073709551615. The read's number check passes
whole numbers, so the profile took it as 1.8e19 mm, and saving wrote it as a decimal the next
read refused: a drawing that saved but didn't open again. K2's fuzz test of drawing files
(#3890) found it.
Both now take the cap the margins have, `MAX_SIDE_MM`, in `validate`, so the file is refused
when it's read. Layout's own checks against the sheet are unchanged, so a 5000 mm mark still
validates and is refused only on a sheet too small for it.
Tests: the hostile-profile test refuses 5000.000001 mm and 1.8e19 mm for each mark, and takes
5000 mm on its own; 4 planted faults (each cap removed or made one short) are all caught.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials types: phantom, reference, purchased and inseparable (#3874) (#5107)
* Bill of materials types: phantom, reference, purchased and inseparable (#3874)
A component's bill of materials type is a part property (`bom_type` in its metadata, set with
component.metadata.set and read by component.metadata, as part_number is), so older releases
keep it and no format change is needed. It isn't a design property: the Design Properties
dialog doesn't list it and document.metadata.set refuses it. A word this build doesn't know
reads as normal and is kept.
assembly.bom counts by type: a phantom has no row and what it holds counts where it is placed,
in the same rows as the same parts there; a reference counts nowhere, and nothing inside it
does; purchased and inseparable components are one row, and in parts only an inseparable
component's purchased parts are listed too. Rows of one part number but different types are
different rows. Rows and children carry bom_type. With no types set the rows are as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: bill of materials and bill of materials type (#3874)
The bill of materials types are a new idea, so the glossary gets their
term, with the five types, and "normal" gets its fourth meaning in the
table of words with more than one meaning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials types: a plain line for each (#3874)
The guide's table and the glossary entry say what each type is for in
plain words: something you make, something just to group, something to
use as a reference, something you buy, something made as one piece.
The names stay the five standard ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bill of materials: kits fold together only when their contents' types match (#3874)
With group_children, two kits with one part number share a row when what they hold reads the
same. That reading (kit_key) compared each child by part number and count, but not by its bill
of materials type, though rows themselves are told apart by type. So a kit holding a made bolt
and a kit holding a bought one, both KIT, folded into one KIT x2 row listing the first kit's
bolt twice: the other type was lost, and which one depended on creation order. 0xlillith found
it in review of #5107.
kit_key now includes each child's type. Equal part number, type and contents still fold.
Test: two KIT kits each holding a BOLT fold into one row of two; once one bolt is purchased they
are two rows, each listing its own bolt. Planted fault (the type left out of the key): caught.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890) (#7098)
* File format families: drawings share the design format's versioning (#3890)
The format code works for a family of files: its own tag, its own numbers and
its own folder of change files, with one reading of a file's format, one
refusal of a file a newer build saved and one upgrade for every family. Designs
(solidcraft/N) are one family and keep everything they had: FORMAT and FORMATS
are as they were, and pending_names, format_string, version_of and read mean
what they did. Drawings (solidcraft-drawing/N) are the other, with format 1 as
their first record and each later change one file in
crates/doc/src/drawing/format/pending/, as design changes are. Nothing saved
changes.
A design tag never reads as a drawing's or the other way round, and a file that
names no format is a design from before format strings, never a drawing. Every
refusal names its family; a design's read word for word as before. A design
listing a pending change this build doesn't have is now refused as a newer
build's before its content is checked, as a newer number already was, so a
newer build's fields never read as damage. The list reader is
take_names(v, key, noun), the shape #4811 uses for its own list.
For the maintainer, the release step changes: scripts/fold-format-pending.sh
now folds every family that crates/doc/build.rs lists (FAMILIES), each into
its own next number: designs into crates/doc/src/format/v<N>/ as before,
drawings into crates/doc/src/drawing/format/v<N>/ from 2. With nothing pending
in a family it says so and moves nothing. Its test folds a drawing change into
v2 beside the design changes. docs/releasing.md, CONTRIBUTING.md and AGENTS.md say so.
build.rs lists each family's changes from its own folder, each folder's
versions contiguous from its own base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing record: format 1 of the drawing family (#3890)
A drawing is now a record of its own (crates/doc/src/drawing.rs): its name,
the designs it draws (sources: an id and the design file's path, relative to
the drawing's folder as a linked design's is), its properties under the design
metadata's rules, its units (each design's own, or one length unit of the
expression unit table), its content language (a BCP 47 tag) and its sheets.
A sheet holds its paper, a copy of its drawing border's profile, the
resolution its pictures are rendered at (300 dpi unless it says, 25 to 2400),
the component it documents and whether it is left out of the sheet count or
of printing. This is format 1 of the drawing family; each later kind of
record adds one file in crates/doc/src/drawing/format/pending/.
The rules: one id counter for every object, raised above the largest id when
a file is read and never rewound; every reference is an id that must resolve,
or the file is damaged and refused, never patched; 1 to 1,000 sheets, at most
64 sources, names of 1 to 256 bytes, paths of 1 to 4,096 bytes without NUL.
The same drawing always saves as the same bytes.
Drawing::from_json reads at most 16 MiB of text, then runs the family's format
check, the number check, the upgrade, the typed record (unknown fields refused
everywhere) and Drawing::validate. The number check is now one function every
family calls, Family::check_numbers, told which field holds other tools' data;
a design's refusals read as before.
Nothing saves or opens a drawing yet: the container is the next step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing ids: random and collision-free from format 1 (#3890)
A drawing's objects now take random ids, the form jyviko chose on #3890 from
#1017: no counter, so objects added on two branches never share an id and
never edit one line. The allocator is one module for drawings now and designs
later (#626 Phase 3), crates/doc/src/ids.rs: an IdSource gives nonzero u64s by
splitmix64 from a seed, each checked against the ids in use and drawn again
when it is one, or when it is 0. A run never draws a number twice, so at most
one draw per id in use comes before a free one, and a seeded run over a file
the same seed made still gets a new id. IdSource::seeded gives the same ids
for tests and replays; IdSource::from_entropy seeds a session from the
standard library's hash keys, the time and a count, with no new dependency.
In a file an id is 13 characters of Crockford base32, lowercase
(0000000000001 to fzzzzzzzzzzzz): ids::encode writes it and ids::decode reads
only that spelling, case-sensitive, so an id has one form to search for.
Anything else, 0 included, makes the drawing damaged. The drawing loses
next_id (a file that holds one is refused), and Drawing::new and allocate_id
take the IdSource. Messages name ids as the file writes them. The component a
sheet documents stays its design's own number until designs move over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing record: a drawing too large to reopen isn't saved (#3890)
from_json reads at most MAX_DRAWING_BYTES (16 MiB), but to_json had no limit. Other tools'
properties are kept as they came, and indenting them can grow a drawing read in at about 4 MB
past 16 MiB (two million zeros in one array), so the next read refused what the save had just
written. 0xlillith found it in review of #3891.
to_json now returns a Result and refuses JSON longer than a read takes ("drawing too large to
save (at most 16 MiB)"), so every drawing saved opens again. Nothing writes drawing files yet, so
the error reaches the future file writer before it publishes anything.
Test: that case is refused, and a smaller compact drawing saves and reopens unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890)
K3 of the drawing storage plan (W11.2): the file a drawing is saved in. Nothing writes one from a
command yet; opening and saving come with K5.
- A drawing container is a design container holding `drawing.json` (Deflate, as `document.json`)
in place of `document.json`, and `container.json` says so:
{"content": "drawing", "format": "solidcraft-container/1"}. A design's `container.json` is as it
was, with no `content`. The plain JSON form is the drawing's own text. Both give the same bytes
every save, so a drawing can live in version control as text.
- `io::file_kind` tells a design from a drawing by `container.json` or by the JSON's format. The
design reader refuses a drawing ("this file is a SolidCraft drawing, not a design: open it as a
drawing") and the drawing reader a design; plain JSON only asks when it isn't a design, so
reading a design costs nothing more. A container's content this build doesn't know, or a drawing
container that also holds a design's `document.json`, is refused.
- `read_drawing` (bytes, either form), `read_drawing_file` (one seekable handle, the design
reader's checks) and `write_drawing_container`; `DRAWING_EXT` (`scdwg`) and
`is_drawing_path` beside the design's.
- The container writer's set-up and finish, the file opening and the container sniffing move into
one function each, which designs and drawings both use. The container's own checks (budgets,
entries, the ZIP directory) are the design container's, word for word.
Tests: a drawing round-trips through both forms byte for byte, and the container holds exactly
`container.json` and `drawing.json`; `file_kind` on both forms of both kinds; each reader refuses
the other's file; unknown content, a stray `document.json`, a missing drawing, an unknown
container version and a damaged drawing refused; both forms from disk, and a directory refused;
mutation fuzz of both forms (an error or a drawing, never a panic).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Paper scene: SVG of a sheet, its lines, arcs, cubics and fills (#4890 A3a) (#7032)
The first export of a paper scene, as SVG first (jyviko and 0xlillith on #4890), from the research
in the plan's §16. A3b adds ellipses, hyperbolas and Béziers above degree 3, which this refuses as
"not supported yet".
- `geom::paper::Prepared`: writers read a scene through `Scene::prepare`, which checks it first, so
none reads one unchecked. Clipping goes there too, once (A8).
- `geom::paper::arc_pieces`: an arc's ends in pieces of at most a quarter turn, the last its own end.
A half turn drawn from its ends is ill-conditioned: rounded to the nanometre (six decimals of a millimetre) its
centre moves up to 1e-2 mm, where a quarter turn's stays under 1e-6 mm.
- `io::paper::paper_svg`: one user unit a millimetre, the size in mm on the root; y flipped by
writing the height less y, so the file's numbers are page coordinates and an anticlockwise arc
has sweep flag 0; lines `L`, arcs `A` (never large-arc), cubics `C`, parabolas `Q`; fills
black and even-odd; one path per item; groups as `data-object` and `data-kind` (object ids can't
be XML ids). No background, so cutters see only the marks.
- Numbers are whole nanometres (six decimals of a millimetre): no exponent, no "-0", the same bytes every time. They are the
writer's own state too, so a joint is written once and a closed path ends exactly on its first
point. Numbers are written straight onto the document, with no text made per number. A width
under half a nanometre is written as one, and a piece too short for the grid is merged into the
next, both counted in the report; a path's last piece has no next, so it is kept however short
(unless it has no length). Output over 64 MiB is refused.
Tests: the A3 drawing border's whole document; quarter, 270°, clockwise and whole-turn arcs, and a
circle of two halves giving the same four quarters; the quarter-turn boundary both sides; cubics and
parabolas, and the conics refused; the number format; a closed path whose start and end round
apart; a sliver merged; an open path's short last line and arc kept, and one of no length dropped; read back through our own SVG reader (lines exactly, the arc as an arc);
the scene's JSON mutated into the writer (never a panic).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing W17a: view definitions as data (#4816) (#4817)
* claim: #4816
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views as data: named views, scales and the map onto paper (#4816, W17a P1)
What a drawing view is, before anything draws it (geom::drawing_view):
- NamedView: the six principal views and the isometric views from the four upper corners, each
an exact basis (a Plane whose normal points back at the viewer), never taken from a camera,
whose pitch clamp would tilt a top view, with no -0 to write out; `iso` reads as the
front-right one.
- basis_looking: any other view from its direction, an up and an origin (paper x = direction x up,
paper y = x x direction), refusing a zero direction, an up along it, or an origin that isn't
finite or within 1e12 mm. W07's
{direction, up, origin} view reads through it.
- Scale: paper : model as two positive numbers, read and written as "1:2", from 1:100000 to
1000:1; Scale::fit picks the largest ISO 5455 preset (50:1 to 1:10000) at which a view fits a
space (W07's "fits the page" default), compared as size x paper <= room x model so an exact
fit at a reduction isn't lost to rounding.
- ViewFrame: a view's basis, scale and place on paper, the point of its plane at `centre`
landing at `position_mm`. Its paper map moves the view's curves and their accuracy onto
paper (paper error = scale x model error); `boundary` maps a box of its plane onto paper from
its four corners.
In geom, where Seg2 lives:
- Similarity2 and Seg2::similar (new): scale, turn and shift a segment exactly, an arc staying an
arc. Similarity2::new refuses a scale that isn't above 0 and works the turn out once, not per
point;
- Seg2::map_controls: a segment's control points mapped by any function. It was doc's
sheet::map_controls; its four callers in doc use the method now, unchanged.
CurveAccuracy::scaled gives a curve's accuracy at another scale.
Tests: each named view's basis and viewer side, and the same bases from a direction and up; a 50 mm cube in every principal view at 1:1 and
1:2, and in isometric (edges 50 x sqrt(2/3), outline 50 x sqrt(2)); the view's centre on its
position (W07's 100 x 20 front view on A3 at 2:1); scales read, written and refused; the fitted
scale, an exact fit at 1:5 and ISO's smallest; no -0 in any named view's axes; an origin refused by
its own message; hostile bases, centres and positions; every segment kind moved by a similarity,
and the similarities refused; scaled accuracy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing views: the bottom view pinned, square near parallel, bounded scales and boxes (#4816)
From DevonHope's review of #4817:
- The tests pin all six principal views exactly. The direction-and-up test uses literal ups,
so a bottom view turned half round now fails it.
- basis_looking squares x to the direction before normalising. Near the 1e-9 threshold the
normal was up to 8.8e-9 rad off; now it is about 1e-16.
- Scale::fit fits nothing for a size or room that is negative or not finite. A size of 0 still
sets no limit that way.
- Each side of a scale is 1e-6 to 1e6, so a scale writes at most 49 characters.
- ViewFrame::boundary returns a Result. It refuses a box that is inside out or not finite on
paper, instead of dropping a corner.
- paper_map, boundary and seg_to_paper say which coordinates they take.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing W18 S2: title blocks as data (#3875) (#3877)
* Title blocks: what a cell shows and where its text goes (#3875)
geom::cell holds a title-block cell's content: parts of text and fields
(component, drawing, sheet, revision or prompt, by key, with an optional
unit and decimals kept as written for the resolver to check), at most 64
parts and 4096 bytes of text, with no control character but a line break.
Beside it are a resolved value (live, overridden and drifted, or missing,
with "-" for each part that couldn't be read and why), an override with
the value it replaced, and the projection a drawing's views use (first or
third angle), which the title block's symbol will read.
A fit warns and never cuts: a count of characters, not bytes, with its own
count for text in Chinese, Japanese, Korean or Yi characters.
The cell text rule places a label and a value: the label's baseline 1 mm
plus its cap height below the cell's top, the value box under it inset by
1 mm, one line centred in the box, and wrapped or several lines down from
its top at the font's pitch, with a warning when the last falls below the
box. Wrapping by width, width warnings and glyphs a font lacks need the
text measured, so they wait for the paper scene's text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Title blocks: definitions and their place on a sheet (#3875)
geom::title_block holds a title block's definition: its size (1 to 1000
mm a side), its outline and cell line widths, and up to 64 cells. Each cell
has a snake-case name of its own, a rectangle measured from the block's
lower-right corner, an optional one-line label with its cap height, and a
value: text from cell content, with its cap height, alignment and fit, or
the projection symbol, which reads the drawing's projection and is never
fixed in the block.
validate() checks a definition on its own, as when one is read: cells
inside the block and not overlapping (touching is fine), label and value
cap heights that fit, and the content's own limits. layout() puts the
block on the drawing border's lower-right corner of a sheet, refusing one
that doesn't fit, and gives each cell's rectangle, its label's place and
its value box by the cell text rule. On A3 landscape a 180 x 54 mm block
runs from (230, 10) to (410, 64); it fits A5 landscape and every larger
sheet, but not A5 upright.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cell text: a value box lies within the paper's coordinates (#3875)
place_lines took any finite, ordered value box, but centring one far out (min x 1e308, max x
1.1e308) overflows: the anchor came back infinite, with no warning. 0xlillith found it in review
of #3877.
The paper scene already bounds every coordinate it holds by MAX_COORDINATE_MM (twenty times
the longest sheet side). That limit is now public, and place_lines keeps its box inside it, so
its anchor is always finite: one rule for what a paper coordinate may be.
Tests: the hostile-box test refuses both overflow cases from the review and a box just past the
limit on each side, and places lines in a box the size of the whole paper limit. The fuzz test's
numbers now include values past the limit (1.1e5, ±1e308).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Title blocks: padding from the lines' inner edges, one label rule, nothing unread (#3875)
A cell's text is padded from the inner edge of its lines: each side of a cell moves in by half
the line drawn on it (the outline's on the block's edges, a cell line's inside), so a wide
outline never covers the text. Before, the padding ran from the line's centre.
The label's one-line rule lives with the cell text rules (`cell::check_label`), where parts
lists will find it. The cell types nothing read yet (`Override`, `Resolved`, `State`,
`Problem`, `Reason` and `MISSING`) wait for the resolver that will read them.
The tests check the exact thresholds inside the lines (a label that leaves no room, a value
that just fits), pick each of the lines, alignment and wrapping on their own so every
combination comes up, and lay fuzzed blocks out on every standard sheet, either way, with and
without the filing margin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Title blocks: the drawing border's line, descenders, room where the block sits (#3875)
From DevonHope's review of #3877:
- Each cell's lines are clamped to the inner edge of the drawing border's line. That line runs
along the block's right and bottom edges, and along any other edge it reaches, as when the
block fills the border. Aabb2::intersection, the 2D twin of Aabb3's, does the clamping.
- layout checks each cell's room again where the block sits (place_cells, which validate runs
at the origin), so rounding at the real corner can't turn a cell inside out.
- The cell text rule counts descenders, at 3/10 of the cap height (ISO 3098's lettering B).
They may reach into the padding under a value box, never past it to a line. place_lines
warns Height when they would, and validate asks it whether one line fits.
- The module doc no longer links to a private function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455) (#2457)
* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455)
crates/geom/src/hlr (L0): prepare once per body, then hidden_lines for a
scene of placed bodies. Edges and face silhouettes are projected from their
exact curves, split where projections cross, and each piece is classified by
rays toward the viewer against the trimmed faces: visible, hidden or
explicitly uncertain, never guessed. Planes, cylinders, cones, spheres and
tori are supported whether stored as analytic records, revolutions or spline
patches; freeform faces are reported and make what they could hide
uncertain. Screen geometry is Seg2 with the W01a accuracy vocabulary: exact
lines and conic arcs where the projection is exact, bounded chords
otherwise. docs/drawing-hlr.md holds the contract and its limits.
* geom/hlr: handle the brep records main gained in #3093
Main's exact model storage (#3093) added Curve::SurfaceIntersection,
Surface::PlaneThrough and Surface::PlacedRevolution, and the HLR matches on
the records no longer compiled. A plane through three points is a plane: it
is trimmed and intersected as one, and a box stored that way draws the same
bits as one with axis-stored planes. The procedural intersection curve and
the placed revolution (whose affine placement may scale it unevenly) are
refused by prepare as not supported yet, until the kernel adapter handles
them. The records' positions move with the body's centre like the others.
* geom/hlr: pad plane faces' boxes, so a plane record off by rounding still hides
Plane faces took the box of their boundary chords unpadded, flat along the
normal. When the plane record and its edges disagree by rounding (a unit cube's
top plane one ulp above its edges, a 100 mm cube's 1e-11), the ray toward the
viewer reached the plane just outside that box, the slab test culled the hit,
and the back edges came out Visible with no doubt. Every face's box is now
padded by 1e-6 of its size, as curved faces' boxes already were. Reported by
DevonHope on #2457.
* geom/hlr: limits from review: trim samples, scene extent, crossing pairs, surface groups
From DevonHope's review of #2457:
- Options::trim_samples must be 1 to MAX_TRIM_SAMPLES (4096).
- Placed bodies must stay within MAX_COORDINATE (1e12 mm, as section and brep
bound stored numbers). Placements 1e200 apart made the scene's size infinite
and every tolerance taken from it with it, so everything came out Visible.
- The crossing search counts its candidate pairs before it starts and meets
each pair only in the first grid cell the two segments share, instead of
keeping a set of the pairs met, which could outgrow wasm's 4 GB before the
500 million pair budget tripped. The same pairs in the same order.
- prepare groups faces on one quadric or torus by comparing each face with
the faces of its kind whose size agrees to the tolerance (sorted), not with
every face; at most 50 million comparisons. prepare_cancellable polls a
cancel callback between edges, faces and comparisons.
* geom/hlr: boundary chords on a grid, and no fine pass over coincident curved chords
The cost items of DevonHope's review of #2457:
- Every ray hit asked how far it lies from its face's boundary by scanning all
of the face's chords (4096 per circle; a plate's face with 256 holes has
about a million). The chords are now bucketed on a uniform grid over the
boundary's box, cells at least as long as the longest chord, and the test
looks only at the cells around the point. It finds exactly the chords the
scan finds.
- Chords of two curved curves that lie on each other end to end (aligned holes
seen along their axes) were cut into 16 by 16 pieces and intersected, to
find crossings that are only noise within the curves' tolerance. They are
now skipped; visibility changes where a coincident run starts or ends, and
chords that only partly overlap still find those.
- Fixtures: a plate with holes, coaxial cylinders seen along their axis, and
300 placements.
* geom/hlr: pad boxes by the body's coordinates too; coincident chords only to rounding
Review of the previous commits found two holes:
- The padding grew with the face's size, but rounding grows with where the body
was modelled: a 0.001 mm cube 1e7 mm out, its top plane one step (1.9e-9 mm)
above its edges, still had its hit culled. The pad now adds 1e-12 of the
body's offset.
- Two chords were taken for coincident when their ends lay within each other's
sag, which in a coarse scene can hide real crossings: an arc can bulge across
a line 1 mm off its chord twice. Only chords that coincide to rounding are
skipped now; identical projections, the costly case, still are.
* geom/hlr: coincident curves meeting at shared sample points do not cross
Timing the review's scenes showed that skipping coincident chords was not
enough: chords of two coincident curves also touch end to end at every sample
point they share, and each touch was a crossing to refine and split at. 64
coaxial cylinders seen along their axis gave 8.3 million crossings (19 s), 64
cylinders one behind another along the line of sight 4.2 million (214 s;
before these commits the crossing budget refused it). A touch at a shared
sample point is now dropped when the two curves also coincide, to rounding, on
both sides of it. Where a coincident run starts or ends one side differs, and
the touch is kept.
* geom/hlr: the own-face margin allows for rounding where a body was modelled
The far 0.001 mm cube of the previous commit showed a second effect of records
rounded at large coordinates: its top plane, one ulp (1.9e-9 mm) above its
edges, hid the top edges themselves, because a ray leaving an edge met its own
face 3.2e-9 mm along, past the own-face margin of 1e-6 of the face (1.4e-9).
The margin now also covers 1e-14 of the body's offset (about 45 ulps of its
coordinates), which only matters for parts far smaller than their distance
from the origin.
* geom/hlr: no parity test for a hit on the boundary, where it is uncertain anyway
* docs/drawing-hlr: the fixtures of the review's second round
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
---------
Co-authored-by: CamWight <91156642+CamWight@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Benny1496 <163034806+Benny1496@users.noreply.github.com>
Co-authored-by: Mateusz Sych <151755914+SychPL@users.noreply.github.com>
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #7495
* Flat Pattern: show the whole flat size (#7495)
Each side of the flat size and the thickness get their own row (Flat size X, Flat size Y,
Thickness), so the panel's width no longer cuts the value off after its first side.
* Flat Pattern: the flat size labels in Arabic, Hebrew and Vietnamese (#7495)
* Reject newly collapsed angular reference lines (#8148)
Reject angular solutions that collapse a reference relative to its input length. Cover constrained drags and already-short references. Engine replay and full CI validation remain in progress.
* Cover live and non-live angular drags (#8148)
Adds a replay of #8148 for live and non-live drags. The integration test compiles locally, but the Windows GNU test executable exits with STATUS_ACCESS_VIOLATION before running tests, including with --list/--help. Kept in the draft PR pending validation on a working native runner.
* i18n: add Bosnian (bs), Croatian (hr) and Serbian (sr) catalogs
Full translations of all English messages, the pending ones included,
kept in step with one shared terminology:
- Bosnian (Bosanski): ijekavian, Latin script.
- Croatian (Hrvatski): ijekavian, Latin script, Croatian standard terms
(točka, kut, brid, ploha, značajka, spremi, izbornik, sučelje).
- Serbian (Српски): ekavian, Cyrillic script; brand and file names,
acronyms, units, key names and placeholders stay in Latin.
The Browser panel is "Stablo modela" so it is never confused with a web
browser, and the History panel is the timeline ("Vremenska traka"), not
the undo history, per the glossary.
Registers the three catalogs, adds them to the new-language test, a
pending attribution file, and a terminology note in docs/localization.md.
* i18n(bs, hr, sr): translate the 195 messages added on main since the catalogs were made
Covers the navigation bar customisation, the render stage, the new
command help texts and the Assistant start-up preferences, so the three
catalogs again carry every English message.
* claim: #7181
* MCP save: a folder the agent opened or saved a design in stays in scope (#7181)
The agent's default folders held the open design's folder only while that
design stayed open there, so after a new design, an opened STEP file or a
save-as elsewhere a save beside the earlier design was refused, while the
same save through the control port worked.
The MCP server now keeps, for the rest of its run, the folder of every
design file a call opened or saved (open, save, and doc.open, file.save,
file.save_as through execute or batch, path given in full) and, headless,
of every design open in its session. Such a call only succeeded because the
folder was already in scope, so naming a path adds nothing. The folders get
the open design folder's terms (inside home or temp, not hidden, hidden
entries unreachable), at most 16. Bridged, they go to the app as
design_folders, which it judges the same way.
The save tool description and docs/mcp.md say how to add a folder with
--allow-path.
* MCP scope: a design's folder is the folder its file resolves to (#7181)
A link in another folder to a design inside the agent's folders passes the
scope check, which follows it, but its own folder was what got remembered
(and, for the open design, what counted while it was open). Take the folder
of the file as the check resolves it.
* Control test: a hidden file the export format accepts (#7181)
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #7635
* Keep the drag cursor on the manifold of an ill-conditioned sketch (#7635)
A construction line collapsed to zero length makes its angle row's entries
on that line ~1e7 while the same row's entries on the measured line are ~1.
Dragging an endpoint of the midpoint-pinned line then failed two ways: the
null-space rank analysis, which scaled rows only, hid the small (physically
meaningful) entries below its pivot tolerance and let the measured line
rotate freely; and the cursor's refinement, which demanded a TOL-tight
correction the ill-conditioned system cannot deliver, gave up entirely and
let the drag leave an unsolvable step placed - breaking the perpendicular
and angle constraints.
Equilibrate the null-space Jacobian on both sides (columns by their largest
entry, then rows) so one row's entries share a scale, and let the cursor
keep working from a pose the solver itself calls solved (residual below
ACCEPT) when refinement stalls above TOL, accepting corrected trials at the
same tolerance the final validation uses.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* agent chat: OpenCode Go preset with per-model endpoints
One preset (https://opencode.ai/zen/go/v1) covers every Go model: each
model is routed to its endpoint family (chat completions, responses,
messages, Gemini), always with the x-opencode-session header Go
requires. Unknown models fall through protocols when Go names the
mismatch; the conversation and tools translate per protocol.
* agent chat: keep Go reasoning metadata, route all listed models (#5656)
* fix agent chat Go endpoints to documented inference routes
* style: collapse long assert in Go routing test (cargo fmt)
* refactor: share Go tool/args helpers, table-driven protocol routing (no behavior change)
* refactor: share GoCallAccum across Go reply parsers (no behavior change)
* refactor: share part/call extractors across Go history converters (no behavior change)
* refactor: share post_to envelope between post and go_post (no behavior change)
* refactor: pass system note into go_responses_input, drop history clone (no behavior change)
* refactor: lazy Gemini name map, shared go_tools, named tool-call cap (no behavior change)
* refactor: share shaped-tool wrapper across Go tool converters (no behavior change)
* fix: set request_timeout_s in Go test setups for rebased main (no behavior change)
* fix: expect ToolsAvailable first in tool-loop tests (matches new event order)
* simplify: reuse tool_arguments, drop restater comments (no behavior change)
---------
Co-authored-by: Julius <julius@localhost>
Co-authored-by: Jom_g <jom_g@users.noreply.github.com>
Co-authored-by: HoloPort <holoport@localhost>
* claim: #8065
* Context menu: only the row under the pointer stays highlighted while a flyout closes (#8065)
A row that owns a flyout kept its highlight for the whole of the flyout's
closing delay, so the row the pointer had settled on lit up alongside it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9c84bdb jyviko: geom: the patch fill is tangent continuous across its own C0 knot lines, and tapers what its corners do not allow
- 2397a691c jyviko: geom: the patch fill is faired at the order it is asked for
- 0631d2d3a jyviko: kernel: a three-round corner patched G2 and G3, read off the faces at each seam
- 11af682c0 jyviko: examples: cleaning up rounds by patching their messy faces, G2 and G3
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f11c0c571 jyviko: Bodies: an operation's result is its record, not the SMLib body it was exported from
- b121d8d00 jyviko: frames tests: the moved combine tool's part is made ungrounded
- e0c7867b9 jyviko: run_strict: the box's volume to 1e-9, as SMLib integrates it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 00faac965 jyviko: kernel: a planar sheet's loop splits where it passes one vertex twice
- 5d25684a1 jyviko: sheet tests: the flat pattern as SMLib's exact 2D boolean makes it
- 52343ba23 jyviko: Robustness tests: a round's tangent chain and the lid's closed-form volume
- bc6d31e60 jyviko: GPU tests build their designs with SMLib, and the GPU jobs fetch it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ab3ba1af4 jyviko: Mesh: a ray through an edge two triangles share crosses one of them
- ccff7224c jyviko: Shell: its planar walls carry their shell roles again
- 068c6a6dc jyviko: Shell certificate tests: the saved strips are saved data, not rebuilt pieces
- b9d4ad74f jyviko: kernel: a planar region inside another's hole keeps its material
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17465a63b jyviko: Tests: the kernel-cases ladder is the reference for what the kernel builds; the seeded robustness goldens go
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 517fc01dc jyviko: Fillet rig: a regression gate on every pull request that touches fillet code
- b91ad9de2 jyviko: Splines: every degree a B-rep record holds is evaluated, so a G4 blend of degree 9 gets its pcurves
- 175b4f2ac jyviko: GPU tessellation: the shader's basis slots follow the CPU evaluator's highest degree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 39bf63b16 jyviko: Kernel rig: designed continuity cases, G0 to G4, that prove the measurement
- 52339b7ec jyviko: Kernel rig: fillet cases for the open fillet issues, each with its exact answer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b859fe6 jyviko: STEP import: a whole sphere bounded by one seam has its frame on that seam
- ce71791ec jyviko: Spline surfaces: a closed spline whose outermost knots appear once is periodic
- c7373279d jyviko: Viewport: hidden edges are drawn before the visible ones, so a visible edge is never covered by a light hidden copy
- b3cb826ed jyviko: Engine: an optional check before every command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6055ce6fd jyviko: step_in tests: knot multiplicities refused per knot, then by their sum
- ae393fd9c jyviko: step_in tests: a face with too many bounds is refused by the reader's own limit
- fc3a13f17 jyviko: step_in tests: the import's repair notes for added seams and turned faces
- 4688c0f20 jyviko: STEP import: a whole round face whose seam is off its frame's quarter lines is turned onto one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d2858cb3d jyviko: STEP import: a circle edge between two vertices is the arc between them, however short
- 8b4b4a9d6 jyviko: SMLib pcurves: an end SMLib moves within the tolerance it held the edge at is mapped
- 6c355fdf7 jyviko: step_in tests: the cube fixture's edge directions clear of the assembly fixtures' ids
- efdc245d1 jyviko: step_in tests: a face the reader refuses leaves the rest of the solid as surfaces, named
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cfaf4ab55 jyviko: Kernel rig: the reason each refused sheet-metal, sweep, crash and ladder case must be refused for
- 30dc4c860 jyviko: Section hatch by part: touching cut parts never look alike
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2dd505d83 jyviko: kernel tests: rustfmt
- ee4d4b5a5 jyviko: STEP import: a round face off its frame's quarter lines is formed within one turn
- 97a31c0c0 jyviko: SMLib: the prebuilt where a union that seals a void keeps its enclosing shell first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 025344dee jyviko: A refused face is tinted as well as ringed
- 25642b6d2 jyviko: STEP import: a part's later instances in a window wait for its first, not end the window
- c1713994f jyviko: Body::unmeshed_faces counts on the coarse plan, without making the mesh
- d0081b235 jyviko: kernel: a placed copy is planned as its original, moved, as its mesh already is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 188011736 jyviko: A part the modelling kernel refuses is named, with what is wrong and what to do
- d3b8c3dc5 jyviko: Browser: Repair Part is planned under #8371
- c15c39443 jyviko: Open and import card: the step marks share one box, size and stroke
- 090fcec6c jyviko: A refused face is ringed in the error colour while the window points at it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 06fbcdfec jyviko: Fillet dialog: Setback shows its default as a length and flags one too small before OK
- baa44fc64 jyviko: Fillet dialog: a setback the field flags is not refused again under the dialog
- b7d813bd6 jyviko: Open and import card: three plain steps instead of a status line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 33acb6dc3 jyviko: Section cap by crossing count: a body touching the cut body no longer shows through
- c33bae870 jyviko: Section cap: only closed bodies take part in the crossing count
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 97721ad05 jyviko: Fillet setbacks not past where the rounds meet are refused naming the least; the rig grades a refusal by its reason
- 3fd5e138c jyviko: kernel: rustfmt
- 61a1f8bf2 jyviko: STEP import: a face's NURBS form ends where its boundary does, within its tolerance
- cd4f72572 jyviko: STEP import: a surface model's closed shell beside a sheet is a solid of its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 912bccef6 jyviko: Isocurve Analysis: faces on one surface share their lines
- 29744b811 jyviko: Preview: the ghost leaves out the surface the changed body keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739153d3d jyviko: Fillet dialog: one option model, plain labels, refusals in plain words
- e4844753c jyviko: SMLib: the prebuilt with a torus or sphere keeping its NURBS form, and the concave mixed fillet corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd5319a0e jyviko: docs: the kernel's move from truck to SMLib, as written up on #4012
- 4cb0d6ee9 jyviko: STEP import: a refused solid comes in as a surface body of its exact faces
- e19785620 jyviko: STEP import: a refused solid's surface body faces as the file has it
- 529fb7cf3 jyviko: Release: macOS builds on macos-15 (GitHub retires macos-14 on 2026-11-02)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a596dd95 jyviko: STEP import: a patch side collapsed within its vertex's tolerance is a pole of the loop
- cfee4a720 jyviko: STEP import: a solid no B-rep can be made of is shown as a mesh of the faces that read
- 5bfecd8a0 jyviko: Tessellation: a loop corner on a side collapsed within its vertex's tolerance is a pole; a face no method plans is left out, named
- 0102f95dc jyviko: Tessellation tests: rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0bee8c2ed jyviko: solidcraft-smlib: Brep::edge_face_distance, SMLib's own edge/face gap
- 5d6810128 jyviko: STEP and SMLib: no edge or vertex tolerance past the 1 mm SMLib takes
- 005b1e6ea jyviko: SMLib pcurves: an edge past its face's patch gets a tolerance that covers it
- f327cdb3d jyviko: solidcraft-smlib test: an edge 2.5 um past its patch keeps its interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd34314d5 jyviko: UI: one continuity control for every continuity choice
- fab8948b3 jyviko: Clippy: assign operators and is_multiple_of in the continuity code
- 1260353f4 jyviko: Fillet Corners: the shared continuity control says what each corner builds
- bf16a76a4 jyviko: SMLib: the prebuilt with eased setbacks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f042d2073 jyviko: Isocurve test: the spline face's hole is an inner loop of one face (Refs #770)
- cb8712aa0 jyviko: Continuity: one table of orders G0-G4, and one check of what each construction builds
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0694fd4e8 jyviko: STEP import: an edge through a face's pole is split there
- 1d70ac267 jyviko: tess: a face whose boundary still crosses itself after untangling is filled leniently, not the whole body refused
- 77bd85cab jyviko: cli: snapshot --quality coarse|normal|fine|ultra meshes the bodies at that display quality
- 1404bc1f5 jyviko: STEP import: a spline face's edges are measured on their pcurves only, not by nearest point first
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e2c0c0a20 jyviko: pcurve: the lift check samples its interval's end exactly
- 293d19f65 jyviko: STEP import: a vertex's tolerance covers its edges', and edge samples end exactly
- 19c4a1502 jyviko: SMLib pcurves: an end SMLib sets within the edge's tolerance is mapped onto our interval
- fc08b5f99 jyviko: bspline: a parameter a rounding past the domain's end is that end
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfcdefa92 jyviko: STEP import: a loop jumps at a pole to within the tolerance, as its pcurves closed it
- 7ba82d729 jyviko: STEP import: spindle and horn tori, and a negative major radius
- 3a7b51f72 jyviko: STEP import: an edge's distance from an analytic face is measured before its closed-form pcurve
- fcb162448 jyviko: brep: the geometry check reads a pcurve at its edge's parameter within the interval's rounding
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 07cb8c7cc jyviko: STEP import: an edge off its face's surface carries its gap as its tolerance
- 21c64fb24 jyviko: tess: an edge loop of fewer than three segments is split until it encloses an area
- 9da3174bb jyviko: solidcraft-smlib: a revolution goes to SMLib as its NURBS form alone
- 31b9410f5 jyviko: solidcraft-smlib: a horn torus to rounding is no ring torus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 05f1c6b9a jyviko: Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
- 87e7fe472 jyviko: Tapped holes: a preference keeps metric's major-less-pitch drill
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9717fab2f jyviko: Tapped holes: Rc and NPT, and a modelled thread with the thread's End
- 72e0e0094 jyviko: Ladder 06/017: the golden entry from a run of the case
- 376a91ad7 jyviko: Hole presets: a modelled tapped thread and its End, and every catalogued size
- b6c3b32a9 jyviko: Tapped holes: an Rc or NPT hole takes the stocked drill under its standard minor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 361b35afe jyviko: Thread: a shoulder thinner than the overrun's reach is still a shoulder
- 5fe141c0f jyviko: Thread: the start never fades; ease_in is gone
- 386598282 jyviko: Thread dialog: the Ends section is Start (None, Chamfer) and End (Square, Fade)
- 80e47130b jyviko: Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2c4212c04 jyviko: Thread: the chamfered tip at the start or at both ends
- 75deb73aa jyviko: Thread: ISO 228-1, ISO 7-1 and NPT pipe threads, taper threads by a radial law
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 28e3b8a19 jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes
- 81ecc872f jyviko: Guide: the Fillet dialog's Type and Corners in their new words
- d1a8f0417 jyviko: Thread: a boss thread keeps clear of the plate below
- a30a85698 jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4f6f254d0 jyviko: smlib: a setback left open is a profiler span like every other SMLib call
- 676919d4d jyviko: tess: a face no method plans is filled leniently in (u, v), and named in the stats
- 1acbe2806 jyviko: Fillet dialog: plain words for continuity, Corners with Setback out of Advanced
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b2fc5e1fb jyviko: smlib, kernel: a refused setback corner is named by its point and why
- 855575473 jyviko: SMLib: the prebuilt with setback-open corners and the refused-corner index
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d8282b336 jyviko: doc, engine: corner: g2 sets each corner back for its G2 patch
- 8fbb575a5 jyviko: kernel-cases: a continuity check, and ladder 07/015 graded by it
- 808913777 jyviko: kernel: G2 corners at concave corners, mixed ones refused
- ba38fbd2a jyviko: kernel-cases: ladder 07/019, a concave corner's G2 patch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6263db8d6 jyviko: smlib: Brep::blend_setback_open, set-back corners left open with their holes
- d63a50c47 jyviko: kernel: seam diagnostics give every station's values
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- faffa6664 jyviko: Profiler: the diagnostics.profile test holds while other tests record
- 7fde0bdff jyviko: Profiler: docs/perf.md says how to switch it on and read it
- 29225d2c8 jyviko: geom: fill_matched, a height field G1/G2 to the faces beside its loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 10ea00e74 jyviko: Profiler: every SMLib C API call is a span, timed by the C API itself
- 319c0bc9f jyviko: Profiler: kernel operations and STEP/IGES import stages are spans
- 9cd655259 jyviko: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile
- fafd977b0 jyviko: Profiler: the Profile operations preference switches recording at run time
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6645e2c6 jyviko: Threads: a modelled thread's tangent flank joins are not drawn
- 970c29745 jyviko: Smooth edges: a measured crease is kept apart from a tangent display join
- 541b94a60 jyviko: Smooth edges: hide only joins inside one smooth surface (G2); draw tangent joins
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 57d48aa9f jyviko: Clippy: the kernel's and engine's warnings on develop
- b52a01e29 jyviko: Attribution: the hand-written box STL of kernel case 4561
- 15caa50d2 jyviko: CI affected crates: no truck crates are vendored any more
- c95580d04 jyviko: Smooth edges: one G1 rule on exact surfaces and pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d13300b0a jyviko: cargo fmt: the format-40 change and the rebase's export list
- 873124c49 jyviko: CI: develop runs like main; SMLib is fetched after the Rust cache is restored
- 6517d1ee6 jyviko: Arabic and Hebrew catalogs: #4414's thread direction labels out, as in every other catalog
- fddb57c0d jyviko: Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4e26dc640 jyviko: The command line and the web app link SMLib by default too
- 826f36a79 jyviko: CI and releases fetch SMLib before building
- 8aea8e5a8 jyviko: Format 40: a thread's hand on tapped holes too; v0.24.0's handedness opens as hand
- 652d3a2cb jyviko: ui: main's browser picks (#4774) read the placed model through session_world
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a57ce13e7 jyviko: thread: a shaft thicker than a modelled thread is refused, never turned down
- 6b9f5e0e4 jyviko: thread: main's screw direction (#4414) out; the thread's hand is the one direction
- 5fc160732 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3e9c70e26 jyviko: Cargo.lock: resolved for the merged manifests
- 6e15b9676 jyviko: engine, kernel-cases: tangent joins out of the corner-pick count; 3383 and 5024 recipes to main's rules
- 46294c7c2 jyviko: kernel: STEP placements by a transformation operator keep its axes and scales
- 3d0f6aa3f jyviko: kernel: IGES trim pieces closed onto their meeting points in main's assembly reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b310512e9 jyviko: kernel-ladder: tier 11 threaded parts grade their geometry
- f6b42d416 jyviko: kernel-ladder: 07/016 is a refusal; 07/018 the same corner with r2; cases.py makes 013
- fb384be9c jyviko: smlib: build against SMLib a15b5a2 (replay of usd-brep 1.0.1 with the fork's fixes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d3f771998 jyviko: kernel-ladder: tier 07 corner cases grade their geometry
- 0d7acb0ce jyviko: kernel-ladder: 08/007 grades the rounds run into the chamfer
- c9dcc42a1 jyviko: kernel-ladder: tier 09 shells grade their geometry
- 05e0dc17b jyviko: kernel-ladder: 10/008 grades the vents as four times one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 191b2f4c4 jyviko: kernel-ladder: cases.py makes every committed case again
- 977230b7c jyviko: kernel-ladder: tier 04 cases grade their geometry
- 84473f61f jyviko: kernel-ladder: tier 06 grades the threaded boss; both hands and Tr40x14(P7) added
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8edf5b873 jyviko: kernel-cases: the ladder's golden recorded after the thread rework
- 2e1c1097a jyviko: geom: a degenerate point's normal steps into the parameter interval
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3287bcba9 jyviko: Threads with several starts
- 7bfc184e8 jyviko: A modelled thread's chamfered tip (ISO 4753)
- d433ce2c9 jyviko: Thread runouts: the groove fades out instead of stopping square
- fdede5a0a jyviko: Thread work in rustfmt's layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 610173e1f jyviko: combine: move each tool into its target's frame
- 3fb263d00 jyviko: hole: keep a countersink's tool within its rim above the face
- 1171c4c2a jyviko: A sheet metal body mirrored or patterned into new bodies is sheet metal (#3353)
- 5a9bf4742 jyviko: A converted sheet takes its rule's values at its own thickness (#4328)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 48abbbcc1 jyviko: kernel: a vertex a face's loops pass twice is one point of its (u, v)
- 1df330c79 jyviko: engine: a shell that opens no face makes a closed hollow body
- 5aeff43f8 jyviko: smlib: a horn or spindle torus face comes out as its NURBS form
- bd4e1926a jyviko: kernel-cases: 2928's base extrudes the ring it describes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 903e371fa jyviko: geom: a face's box reaches its boundary's extremes, not its samples'
- cfe1b8b92 jyviko: step: a loop through its surface's pole has its seam
- 0bea4631b jyviko: kernel: IGES trim pieces that miss their meeting point are closed onto it
- 0e6681a2d jyviko: kernel: the largest fitting fillet shrinks only on a refusal as too large
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 237f0ae74 jyviko: kernel, kernel-cases: a convex blend overflowing a cliff is built, with its analytic answer
- 7d300984b jyviko: kernel, kernel-cases: a shell whose walls would meet is refused, saying so
- 3be6ad433 jyviko: kernel: a tangent chain stops where the edges' convexity flips
- 098fac037 jyviko: geom: a face's loops lie in one turn of its periodic surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 773e627b4 jyviko: tess: no edge segment spans more than a quarter turn; loops touching at a vertex close
- 806268714 jyviko: tess: a face's sampled boundary never crosses itself
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 42e50a87c jyviko: smooth edges: tangent joins of planes, cylinders and cones, along straight splines too
- 89e23d1eb jyviko: record: a body built from a sketch has new edges, with no origins
- 8eb93ff06 jyviko: step_in tests: the cube fixture's edges lie on their lines
- 4b418c0d2 jyviko: kernel: how a body's material regions meet, read from the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667ee5665 jyviko: kernel tests: a blend meant to run along a tangent chain asks for it
- 74d02d2a0 jyviko: smlib: the fork with NVIDIA usd-brep 1.0.1 merged (f7f012b)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 306c7b75b jyviko: pcurve: a rim at a steady pace on a spline face, read from the edge itself
- 28e0eea80 jyviko: pcurve: each use's closed form or none, and a kernel's trims for the rest
- 1bf206259 jyviko: STEP and IGES import: SMLib makes the pcurves that have no closed form
- 879958721 jyviko: pcurves: a flat patch's are a plane's; SMLib's sheet loops read either way round
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2883981a0 jyviko: brep: meridians, revolutions and whole turns exact on their forms
- 6c385c843 jyviko: sew, step: face forms from the boundary's extent; trimmed profiles exact
- fd71e6a95 jyviko: kernel: assembled faces and edges on their NURBS forms
- f6f8b28c0 jyviko: Records require NURBS forms on circles, ellipses and curved analytic faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd873bb83 jyviko: sew: an edge folded across a bend gets a Hermite pcurve on the bend's form
- c376e8403 jyviko: step: imported faces and edges on their NURBS forms
- 69702833f jyviko: solidcraft-smlib: ellipse edges on their NURBS form, as circles are (fork 0c5868e)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c5dbf879a jyviko: brep: exact pcurves of forms: cut on planes, along the parameters of spline faces
- a4180ab42 jyviko: sew: faces and edges on their NURBS forms, their pcurves exact
- 57080f88c jyviko: fixup! sew: faces and edges on their NURBS forms, their pcurves exact
- 76a254137 jyviko: sew: a circle on a revolved face is labelled on that face's frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f070eee2b jyviko: brep, kernel: a face's side is read on its NURBS form (#4149)
- 58f60adbf jyviko: kernel: an assembled face keeps its NURBS form
- 807010c49 jyviko: brep: the NURBS forms of lines, circles, ellipses, cylinders, cones, spheres and tori
- f370d1e42 jyviko: brep: forms on their frame's quarter grid, across the seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6892ceac7 jyviko: brep, kernel: code that reads an edge's angles takes them from the circle, code that evaluates takes the NURBS form
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b1326e48d jyviko: brep: an edge on a line, circle or ellipse carries the NURBS form SMLib holds it as
- 6adba90e2 jyviko: solidcraft-smlib: circle edges on their NURBS form, SMLib's trims kept on them (fork deec9cb)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e6f993fff jyviko: Revert "kernel: merged topology counts no seam edge (a face on both sides of it)"
- 4ea29e307 jyviko: kernel-cases: 818 counts its two cylinders' seams, as every case counts edges
- de0e5bf52 jyviko: kernel: a tangent chain stops at a smooth edge
- 369c897d8 jyviko: kernel, cli: clippy and the cli tests build again
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 84bd2daad jyviko: doc, engine, kernel: solid.fillet and solid.chamfer round each picked edge's tangent chain by default
- d0ff1dcfa jyviko: doc: an extrude's taper without a corner rule picks one per profile
- 5e7aba8df jyviko: loft sections matched to their neighbours
- 2752eee61 jyviko: kernel: merged topology counts no seam edge (a face on both sides of it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b6a3b31ff jyviko: brep: a face on a cylinder, cone, sphere or torus carries the NURBS form SMLib holds it as
- 2e26e0567 jyviko: solidcraft-smlib: the export reads FACE_NURBS_FORM
- 03db54a23 jyviko: solidcraft-smlib: SMLib at the merged fixes: slice, seam check, analytic revolve, draft corners, blend refusal, union of many, NURBS forms (fork 03c14ca)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- bcbb99005 jyviko: kernel, smlib: a blend larger than its faces is SMLib's refusal; blends take exactly the given edges
- 13e49e069 jyviko: engine: solid.fillet and solid.chamfer say they blend exactly the edges given
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2ffbbc74d jyviko: step: a cone within the file's uncertainty of its limit plane over the face is read as that plane
- 0185ccc1e jyviko: solidcraft-smlib: Brep::union_all, the union of many bodies in one SMLib call
- 0213c3dfa jyviko: kernel: union_all, one SMLib union of many bodies checked once, history over every operand
- 83d965f30 jyviko: doc: a join into one target and an intersection's tools are one union_all call
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 045961445 jyviko: doc: an extrude's taper saves how it closes the profile's corners
- 1b5ca02b8 jyviko: solidcraft-smlib: SMLib's tangent draft corner meets lines at an edge (fork ccc56fd and docs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 09c979a4b jyviko: brep: a full circle in a profile is one closed arc
- 8e6c24aeb jyviko: kernel: a raised band reads its arcs' circles from the record
- d10041743 jyviko: kernel: emboss reads a wall's span from its arc's interval
- 0414f5a7a jyviko: kernel: assemble's unused CurveEval import goes with edge_point
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 99024b368 jyviko: solidcraft-smlib: SMLib at the candidate: solver statuses, range-end refinement, arc sweeps as cylinders (fork 1c8e415)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44744d3aa jyviko: kernel: a face's boundary runs along a pole as its pcurves say
- 01845c189 jyviko: kernel: planar sheets are built one simple loop at a time
- 529c2cf04 jyviko: solidcraft-smlib: SMLib's area counts the faces between solid and void only (fork 8400690)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 78937d1db jyviko: brep: one basis-derivative routine, bspline::basis_derivatives
- afce22bb6 jyviko: solidcraft-smlib: mass properties of any body, by its material regions (fork 311946c)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 81cef1c60 jyviko: kernel: a free ruled strip is the exact ruled surface to a far curve of its own
- 9e2c1c57c jyviko: kernel: ruled surface docs and test for the free strip's far curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 2a09b9943 jyviko: kernel: the test target compiles: the last tests on the record and SMLib
- 2f83aaa5d jyviko: kernel: clippy's own fixes across the kernel (needless borrows, assign ops, contains)
- f6afec8ea jyviko: kernel: dead code left by the port deleted; clippy -D warnings clean on all targets
- a0e17daa5 jyviko: kernel: cargo fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1b7fda4d3 jyviko: kernel: surfaces and SMLib blends without the smlib feature gate
- e1b9ea10c jyviko: kernel: placement, history, mesh-memo, display and issue tests read the record
- 8237cc927 jyviko: kernel: mesh, lump, loft-rail, untouched-face and intersection-curve tests read the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- af4e97b64 jyviko: cli: the rig and the oracle reach MeshTolerance through the engine
- f7daf6124 jyviko: doc, engine: the unused revolve targets and the formatting of the exact tools
- caa5ed0e6 jyviko: kernel: twisted and scaled sweeps round corners by the plain sweep's corner model
- dead22ba7 jyviko: kernel: corner rules for direction, rails and closed paths; no feature gate on SMLib sweeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7646e8ff6 jyviko: kernel: compiles on the record — trim reads the tool's side near its body; mesh memo typed
- 748e796b2 jyviko: kernel: sweep histories attach with no edge origins given
- a5f5809ba jyviko: kernel: a ruled strip's side builder needs no mutable binding
- ee79235f5 jyviko: kernel: surfaces, bridge and loft rails clippy-clean; picked_loop gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7d9eb68e4 jyviko: solidcraft-step: a record's layout (solids, voids, sheets) and outer loops for every writer
- ed43871f7 jyviko: kernel: IGES export from the record
- 1d4811201 jyviko: kernel: STEP import tests and docs without the deleted face splitting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30ddda306 jyviko: solidcraft-step: write a schema 4 record as ISO 10303-42 topology
- d59bb0084 jyviko: solidcraft-step: revolutions under axis-keeping placements; void shells as the record has them; Reader::frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 4a8ca6d0f jyviko: kernel: Assembly::finish ends in Brep::canonical
- bd1095fff jyviko: kernel: the general fill's tests read the record; five- and six-sided fills are patches about a centre
- 5aaf405d8 jyviko: kernel: the second-derivative tests check the record's SurfaceEval::second
- 4897ce17b jyviko: kernel: loft rails tests measure against the record's surfaces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 849bb1f24 jyviko: kernel: face sections along a direction as SMLib's exact curves
- 876333480 jyviko: doc: an iso link along a direction on a solid is SMLib's exact section
- d9274aaf1 jyviko: kernel: the point-path sweep test expects the polyline's walls
- 13e9aca7e jyviko: kernel: exact projection, section and iso curves exported; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7b5d732e3 jyviko: kernel: project_onto_face, sketch curves projected onto a face as SMLib's curves
- 0ef5b910f jyviko: doc: a curve projected onto a solid's face is SMLib's projection of the curve
- 95e9a80fa jyviko: kernel: iso_curves, a face's isoparametric curve exactly, trimmed by its loops
- 814475f4f jyviko: doc: an iso curve of a solid's face along u or v is the surface's own curve
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6d0993817 jyviko: kernel: a ruled strip whose rulings turn along a free-form edge is refused, not fitted
- a6b41dd82 jyviko: solidcraft-smlib: Brep::project_curves, curves projected onto a face as SMLib's B-splines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1708fe0e0 jyviko: brep: Brep::canonical, any record in canonical order
- 98548fe16 jyviko: kernel: one canonicaliser; one tensor sheet
- f8e175273 jyviko: brep: Brep::split_edges, a record's edges split exactly at parameters inside them
- 65e141ac4 jyviko: kernel: stitch splits an edge at another sheet's vertex lying on it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 30b02cdfa jyviko: kernel: the solid loft's rails anchored by loft_rails::railed; path curves shared
- 0d611ed84 jyviko: kernel: surface sweeps mitre at corners, as the solid sweep does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c7afe5eb4 jyviko: doc: a lip is SMLib's raised band and a groove its exact rim band, nothing else
- 89423b88e jyviko: doc: a sheet bore is cut once, with the drill clipped to its panel
- f4fa8a407 jyviko: kernel: the touching-face checks, extrusion batching and clearance probe are gone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7c0d9b5e8 jyviko: kernel: the general fill on loops of five or more edges, its patches about a centre
- 87907628e jyviko: kernel: surface match on the record, through bridge's record API
- 22fde06a3 jyviko: kernel: loft blend on the record, through bridge's record API
- 7e7193b33 jyviko: doc: the faceted thread groove is gone; the groove is SMLib's exact screw sweep
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- beebf2203 jyviko: kernel-cases: --dumps=DIR leaves each failing SMLib call's inputs for replay
- 83c0f4e2c jyviko: AGENTS.md: SMLib is the kernel; no switch, no other kernel
- 1b27c134d jyviko: kernel: an intersection curve is where SMLib's imprint cuts, exactly
- 9398b2586 jyviko: kernel: intersection edges exported from the crate root
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e00645ca5 jyviko: kernel: crate root follows the split, surfaces and SSI ports
- 252b2947a jyviko: kernel: mesh bodies built by Body::of_mesh; fuzz booleans have no fallback counts
- 0013249c4 jyviko: kernel: Patch of a body's edges is fill's patch with no crown
- 08f061b02 jyviko: kernel: boundary surfaces on the record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9b5e0a8b4 jyviko: kernel: T-spline sheets as record faces; NURBS faces on the record
- 5c1b335e1 jyviko: kernel: bridges read their support faces on the record
- b5a7d52b7 jyviko: kernel: bridges and surfaces read the body's own record
- c83bd8f94 jyviko: kernel: T-spline and offset tests read the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- f6fb1af00 jyviko: kernel: an arc's knots built without a borrowed temporary
- d3ca6e089 jyviko: kernel: loft rails on exact NURBS sections, the last section met where the rail ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0cbd9e19d jyviko: kernel: profile segments as exact schema 4 edge curves and pcurves
- e1326f37f jyviko: solidcraft-smlib: Brep::stitch and Brep::offset_sheet, and the fork pinned at e3d478d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 585334a29 jyviko: kernel: planar source lineage on the record, coplanar faces joined by SMLib
- 5c16e8dd1 jyviko: kernel: coplanar faces joined by SMLib's merge_faces, the record read from the body
- c802458ef jyviko: solidcraft-smlib: Brep::face_points, a point inside each face (smlib_face_points)
- 453a4dec7 jyviko: kernel: a trimmed piece's side is read at a point inside it, exactly
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e520c9d42 jyviko: kernel: a body's record may be a surface body of open shells
- befcfecb7 jyviko: solidcraft-smlib: Brep::split_faces and Brep::split_body on the fork's split shims
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d5d783066 jyviko: kernel: outline_union deleted, a retry of the old boolean with no caller left
- 25b128698 jyviko: kernel: crate root follows the query-module port; SMLib at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- abf46cc21 jyviko: kernel: clearance reads each face's surface from the schema 4 record
- f53405d6b jyviko: kernel: plane_fit fits and certifies planes on the schema 4 record
- bd956b88a jyviko: kernel: spline_conv makes record curves, surfaces and tensor sheets
- abb7c37d8 jyviko: kernel: face_params deleted; a face's boundary in its parameters is the record's pcurves
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e463eabb6 jyviko: kernel: topo reads each face's surface from the schema 4 record
- 80e34cc8c jyviko: kernel: surface_kind reads faces and edges off the schema 4 record
- b0ad6f62b jyviko: kernel: body distance projects onto the schema 4 record's faces and edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 3ef93b363 jyviko: kernel: the general fill is the iso-parametric patch on three or four edges
- cfb5dc3ba jyviko: solidcraft-smlib: Brep::planar_faces and Brep::boolean2d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5fa086dd5 jyviko: kernel: record.rs records history on the schema 4 record, by index
- c5c411de5 jyviko: kernel: an assembled record is the body; its history through record::attach
- 796d3e7d2 jyviko: kernel: boolean_record composes histories; healing is heal's
- f56a94eac jyviko: kernel: exact path helpers exported; SMLib pinned at the fork's integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7952516eb jyviko: doc: sweeps along linked and planar curves follow the exact curves
- 43e8b0349 jyviko: kernel: a point path's polyline is swept as the lines it is, however smooth
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 166bfbacd jyviko: brep: records of bodies apart from each other join into one; islands stay inside their voids
- 065e61ec7 jyviko: kernel: Body is its schema 4 record, with its SMLib body made once
- 22734a55f jyviko: kernel: trim on the record: split, side by the tool's field, pieces removed
- 7bbdd3713 jyviko: kernel: untrim on SMLib (smlib_untrim_face), its history from SMLib's tags
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 1d289dfd6 jyviko: kernel: fairing works on record curves and surfaces; fair_faces rebuilds through SMLib
- f9f59d826 jyviko: brep: SurfaceEval::second, a record surface's exact second partial derivatives
- 748d9f25e jyviko: brep: CurveEval::derivs, a record curve's point and first derivative
- e01018839 jyviko: kernel: seam continuity measures the body's record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 9f71e93e2 jyviko: kernel: Delete Face with healing on the schema 4 record
- 3bd1cc534 jyviko: solidcraft-smlib: Brep::merge_faces, SMLib's removal of topological edges and vertices
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cbf28a4fd jyviko: kernel: the prism boolean modules are gone from the crate root
- 9268a1e88 jyviko: solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b11433bc5 jyviko: kernel: smooth display edges classified on the schema 4 record
- 3ca3638c5 jyviko: kernel: the curve, loop and vertex blend modules are gone from the crate root
- b0cc84b28 jyviko: brep: a record moved rigidly, exactly
- fa3d914af jyviko: kernel: SMLib measures mass properties at its documented 1e-4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6e17d26dd jyviko: brep: a spline's closedness is worked out once, not on every evaluation
- 51d7fc413 jyviko: kernel: IGES trimmed surfaces close their loops and split into separate bodies
- f71cb3d99 jyviko: engine: revolve about a construction axis given by name
- 85da7d6c2 jyviko: engine: count a face pick's work as it is done
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d61efb306 jyviko: kernel: a face's boundary takes its (u, v) from the record's exact pcurves
- 4b8edef06 jyviko: kernel: the tessellator's tests plan the body's schema 4 record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 667cd3356 jyviko: solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
- e57f2f2a5 jyviko: brep: a face's points search one grid of its surface, made once
- 1bc0df6d0 jyviko: doc: a join of many tools into one target unions them in a balanced tree
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69a7a85cb jyviko: kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cac7d6eff jyviko: kernel-cases: the hollow ball of case 450 has two shells
- faae48d6e jyviko: solidcraft-smlib: Brep::loft_to_point, and the fork pinned at 0294982
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 520d934fe jyviko: kernel: SMLib sweeps that twist, scale or follow rails, railed lofts, and paths of points
- f870ecb87 jyviko: solidcraft-smlib: pin the fork at ffaf4e8, offset merge and intersection-edge ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e1a257169 jyviko: kernel-cases: SOLIDCRAFT_KERNEL=truck grades as the default kernel
- 1336352a4 jyviko: solidcraft-smlib: pin the fork at 2d7c7ed, the second round of SMLib C++ fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5a630daee jyviko: tess: a hole in a closed face lies in its outer loop's period
- 693cba4e2 jyviko: kernel: a curved strip straight across and narrower than a side is its boundary nodes alone
- 20d4b1f4e jyviko: kernel: a spline wall winding round an axis sends its body to the display plan for meshing
- 5ed1e95a4 jyviko: kernel: a cut grid past the grid cap thins its lines instead of giving the face to Delaunay
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 69ad1ae45 jyviko: solidcraft-smlib: the curve list carries nothing in a build without SMLib
- 1a5e60349 jyviko: brep: a point's parameters on a spline winding several turns are found on its own turn
- e1c631dd3 jyviko: brep: a pcurve keeps its tangent where its curve is smooth through a full knot
- 829d161f6 jyviko: brep: the projection runs Newton from up to 32 starts, nearest first, until one lands
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 02bfd6e10 bherbruck: kernel: draft through SMLib
- d20e91f8c jyviko: doc: re-anchor a stored face pick strictly inside its named face
- 36b7aa267 jyviko: solidcraft-smlib: a build without SMLib keeps the sweeps' curve lists without a dead-code error
- d22e89bcc jyviko: solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 714475b84 bherbruck: kernel: measure through SMLib's exact mass properties, checked against the mesh
- 07c36cfd0 bherbruck: solidcraft-smlib: Brep::chamfer_sides, and Error::Unsupported for a radius law with a corner
- ae1d746ae bherbruck: kernel: chamfers with two setbacks through SMLib
- a043e4ae2 bherbruck: kernel: an SMLib blend's corner patch comes from the edges meeting there
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8fde178fe Brennen Herbruck: kernel: any schema 4 record into SMLib with its order, healed where refused
- 5014c4f17 Brennen Herbruck: kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies
- 8ad09ec64 bherbruck: smlib export: a face's loop crosses its poles where the face's parameter box says
- f4da25243 bherbruck: solidcraft-smlib: the fork at bf7c272, whose operation results hold their own gaps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 96bdbbf3b bherbruck: docs: SMLib vs truck triage of the sweeps, threads and shell cases
- 82fe0e59e Brennen Herbruck: solidcraft-smlib: Brep::imprint
- 7e208529c Brennen Herbruck: solidcraft-step: each record face names its face in the file
- 863afb5e3 Brennen Herbruck: solidcraft-smlib: an arc past a full turn goes to SMLib a turn back
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- baae4ee19 jyviko: kernel: fillets and chamfers through SMLib when SOLIDCRAFT_KERNEL=smlib
- f73d40383 jyviko: kernel: an SMLib blend pick at a seam's end takes the sharp edge there
- 1d8299aed jyviko: kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 29d307bdc jyviko: doc: a modelled thread through SMLib cuts the exact groove
- 5dd3acdec Brennen Herbruck: kernel-cases: on the kernel branch a thread off its hole or shaft size is refused
- b900d6d46 jyviko: kernel: solids an SMLib boolean leaves touching come back as separate solids
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 0f3d6f177 jyviko: kernel: shell, offset faces and thicken through SMLib, with SMLib's history
- 82865e283 jyviko: kernel: a body SMLib walks some loops of the other way keeps its order
- 6bfbe1041 jyviko: kernel: an SMLib shell opens a round wall whole; split pieces press on either kernel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d672cfa01 jyviko: kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation
- f35f06d98 jyviko: kernel: a revolution that is no analytic surface goes into SMLib as its B-spline
- a6ca4e0dd jyviko: AGENTS.md: one switch, SOLIDCRAFT_KERNEL, in place of the booleans-only note
- 51211ad1f jyviko: solidcraft-smlib: offset faces, thicken, and NoRoom for walls with no room
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e35b4d744 jyviko: kernel: revolutions of a line square to the axis go into SMLib as planes
- 00e43aacc jyviko: kernel: an operand SMLib's check refuses goes through SMLib's healer
- 94c159825 jyviko: kernel: SMLib's round faces decode as truck's own revolutions are laid out
- ff0f7ccfa jyviko: kernel: a body's record for SMLib takes a larger tolerance where an edge needs it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b27751d43 jyviko: kernel: planes go into SMLib as its planes; analytic angles start at zero
- 640d3d9ea jyviko: kernel: truck's extruded circles go into SMLib as its cylinders
- 1980f9743 jyviko: kernel: SMLib's export keeps every face of a void's shell
- c344801cc jyviko: kernel: note that the engine's and CLI's `smlib` features reach SOLIDCRAFT_BOOLEANS
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5238840bc jyviko: kernel: booleans through SMLib behind SOLIDCRAFT_BOOLEANS, with SMLib's history
- d271add1a jyviko: kernel: revolutions go into SMLib as its cylinders, cones, spheres and tori
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c992630e1 bherbruck: ATTRIBUTION.md: rows for the kernel rig's STEP import fixtures
- b90a5851c jyviko: kernel: open a half sphere's loop at its pole, so its seam closes
- 54542890d jyviko: kernel: hold every display-plan triangle to the chord tolerance
- f7336497f jyviko: AGENTS.md: the kernel does geometry, sugar lives above it
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 201ca9a81 Brennen Herbruck: smlib tests: score SMLib's GlobalSurfaceIntersect on the SSI corpus
- f8b48d0e4 Brennen Herbruck: smlib: pin the fork at 70e1bf5 (capi: surface/surface intersection)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17eafa2d4 Brennen Herbruck: solidcraft-smlib: revolved surfaces into SMLib as exact rational B-splines
- 1edeb2a6f Brennen Herbruck: tests: SSI corpus fixtures (119 cases with exact truth)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 58ce14f45 bherbruck: kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
- e809edd33 Brennen Herbruck: kernel-cases: thread cases that are slow by nature get 600 s
- 8cb976b9b bherbruck: kernel-cases: watertight checks the display mesh, welding vertices by distance
- 3feb9ba2c Brennen Herbruck: kernel-cases: tessellation cases from mesh-hole reports grade watertightness
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 35ebc816b jyviko: kernel-cases: a missing capability's message is the case's own text
- 248fee75b jyviko: ladder: every ladder run measures one case at a time
- e1575385b Brennen Herbruck: kernel-cases: a thread off its hole or shaft size is refused
- d7381a1fa bherbruck: kernel-cases: threads fit a hole or shaft off the thread's size again
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 75aa8acb6 Brennen Herbruck: kernel-cases: sweeps skipped sources (72)
- 678a70da2 bherbruck: kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- c24b066d2 bherbruck: kernel-cases: an outcome for geometry with no single manifold answer
- 8764a76ff Brennen Herbruck: kernel-cases: threads cases from #1995 and #3368 (finely faceted booleans), skipped #987#3130#3824
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a9002968f Brennen Herbruck: kernel-cases: sweeps sweep and pipe cases from #96-#3505 (end scale, rails, corners, closed paths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5e71db662 Brennen Herbruck: kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 739524a17 Brennen Herbruck: kernel-cases: sweeps lofts from #271-#3412 (zig-zag pairing, ring sections, flush joins and cuts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ce201eea1 jyviko: kernel: SMLib spheres cut by a boolean decode oriented and meshed
- 62142ef38 jyviko: brep: a revolution of a closed profile is periodic along it
- 62124a711 jyviko: kernel: spline edges on part of their curve load as that piece
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a7c0109ea Brennen Herbruck: kernel: boolean runner grades the seeds against a reference volume
- 7bb74d1c6 bherbruck: kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ac6ddbdbe jyviko: kernel: boolean runner times both kernels and runs the cut sequence
- 79ae117dd jyviko: kernel: boolean runner measures SMLib's results again on truck
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 27e996c44 jyviko: brep: splines closed on themselves are periodic for pcurves and tessellation
- 204b650d9 jyviko: brep: check_geometry refuses loops that enclose no area or turn the wrong way
- 19cf3d94a jyviko: brep: orientation, not position, tells a face's outer loop
- 2196129f1 jyviko: kernel: side-by-side boolean runner calls SMLib's boolean
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 5b8d89abd Brennen Herbruck: kernel: schema 4 STEP records of revolved and conic-bounded parts against closed-form volumes
- c35fd77f6 jyviko: solidcraft-smlib: rebuild SMLib when its own sources change
- 734883bdb jyviko: solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d41ae8512 Brennen Herbruck: solidcraft-step: surfaces of revolution and extrusion, offset surfaces, hyperbola and parabola edges
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- e0bad4161 bherbruck: solidcraft-smlib: check test on every primitive
- 7050e9cfc bherbruck: solidcraft-smlib: mass properties of every primitive against closed forms
- 4983b8872 Brennen Herbruck: kernel: the boolean runner builds every SMLib operand
- acff340a0 Brennen Herbruck: solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 161832976 jyviko: AGENTS.md: unsafe in the SMLib FFI module and its child modules
- 25d2056a2 jyviko: brep: a seam from pole to pole gets pcurves a period apart
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- b85b51e81 Brennen Herbruck: solidcraft-smlib: blend faces come from the edge they replace
- 4a6494b48 jyviko: brep: check_geometry, the geometric agreement of a record
- 570028f31 jyviko: brep: the truck adapter checks a record's geometry before decoding it
- 30f5e617c jyviko: brep: document check_geometry in the validation section
Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- fd80377dd Brennen Herbruck: solidcraft-smlib: face and edge history out of SMLib operations
- 4a4e11ef7 Brennen Herbruck: kernel: a side-by-side runner for truck and SMLib booleans
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 60aa5e697 jyviko: solidcraft-smlib: build every C API source file
- 3c0b53935 jyviko: solidcraft-smlib: read SMLib's log lines inside the FFI module
- 858f2c3bd jyviko: solidcraft-smlib: the C types are imported only when SMLib is built
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 692fba51a jyviko: naming: say how to re-record the corpus names
- a8c8f8832 jyviko: naming: list removed lines before added ones in the corpus diff
- 1d4916008 jyviko: brep: a surface point's parameters move to geom
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 099026d94 jyviko: kernel: fitted pcurves on curved surfaces, unwrapped and closed per wire
- c7088fac9 jyviko: kernel: pcurve tests for seams, poles and loop orientation, and pictures
- 0d026e975 jyviko: kernel: pcurve fits start from four samples per span
- 4afbe3b90 jyviko: kernel: pcurve test for a face round its surface without a seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 7024ceec8 jyviko: CI: no runs for pull requests into kernel-smlib for now
- 92d433ca9 jyviko: AGENTS.md: the kernel-smlib branch's rules (ADR 0002)
- ee5deffaa jyviko: brep: Curve2 pcurve type and the truck pcurve entry point
- 26ab8981d jyviko: kernel: exact pcurves of lines and splines on planes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-20 22:53:02 -04:00
4764 changed files with 602674 additions and 114506 deletions
<!-- Title: which part of the app changes and what a user now sees or can do, clear to someone who hasn't seen your chat, the issue or the code. -->
## Change
Describe the problem and resulting behavior. Link the issue when applicable.
Start with what this is, in plain words someone new to the project would understand: what it does and who it's for. Don't assume anyone knows the name of your tool, project or feature. Then describe the problem and resulting behavior. Link the issue when applicable.
Changes a default: no
@@ -14,6 +16,8 @@ What did you run, and what were the results? Include expected and measured value
## Screenshots of the behavior (when observable)
Put the picture or video here in the description. A file in the diff doesn't count: a maintainer has to be able to see what this is without opening the changed files.
For observable CAD, UI or model behavior, include actual descriptive screenshots or a short recording from a small reproduction. This includes kernel, geometry, assembly and backend effects that can be shown in the app. Coding agents should run the app and capture the evidence themselves, rather than asking a human for evidence they can produce. Show the actual failure/result, preferably before and after, with brief steps, expected/actual behavior and annotations where helpful.
Flowcharts and Mermaid diagrams cannot substitute for evidence of visible behavior. Use diagrams for architectural reasoning when actual screenshots cannot illustrate the point. Changes with no useful observable behavior may omit screenshot/video evidence. Exclude private designs and sensitive details; attach media or link to an accessible recording rather than committing generated review artifacts.
# nightly. The reference tests and the doc tests run in the merge queue, on main and nightly, not
# on pull requests (the fast lane, in Select checks); a break there is fixed forward on main. The
# Windows jobs (D3D12 shaders and app startup) run nightly, and in the merge queue only for a group
# that changes what they exercise. Only main saves the build caches; pull requests restore them.
# that changes what they exercise. The wasm compile check runs in the merge queue for a group that
# touches the crates below the apps, the web app or the manifests. Dependency advisories run nightly
# and on any pull request or merge group that changes Cargo.lock or a Cargo.toml. Only main saves the build caches; pull requests restore them.
# sccache is on a Blacksmith sticky disk that only main commits.
# A push to main runs only the repository checks when a passing merge-queue run tested that very
# commit, or when nothing a build reads changed since the last push to main whose run passed.
@@ -31,6 +33,8 @@
# `ci` job still runs and reports the commit's real result (see the `ci` job): the merge queue
# reads `ci` from the newest run of a commit, so a run without it would block a PR that passed.
# Cross-compilation is opt-in through Run workflow; release builds remain in release.yml.
# The release gate (release-gate.yml) calls this workflow (workflow_call) as a Run workflow with
# cross-compilation on.
# Every Linux job runs on Blacksmith's Ubuntu 24.04 runners (blacksmith-<N>vcpu-ubuntu-2404), sized
# per job: 32 vCPU for the tests, 16 for Clippy, the GPU path tests, the archive build (nightly) and the merge queue's, 8 for compiles, doc and reference tests, 4 for the light checks, 2 for Select checks and ci.
# The Windows shader job runs on Blacksmith's Windows Server 2025 runners (blacksmith-8vcpu-windows-2025);
@@ -48,10 +52,14 @@ on:
# only (other labels are skipped, see the top of this file).
# Pull requests test the affected packages (scripts/ci/affected.py).
scope=(--workspace)
if [ "$FULL" != true ]; then scope=(); for p in $PACKAGES; do scope+=(-p "$p"); done; fi
status=0
# The GPU path tracer's tests run in their own job (GPU path tests): one at a time, they
# took about 36 of this job's 45 minutes.
# A failed test does not fail the step by itself: the tests known to fail today
# (tests/KNOWN_FAILING_TESTS) may fail, any other fails it, and so does a listed test
# that passes. nextest's exit code 100 is "tests failed"; any other is its own error
# (a build error, a bad filter) and fails the step at once.
status=0
cargo nextest run "${scope[@]}" --cargo-profile ci --locked --profile ci --no-tests=pass \
--ignore-default-filter -E "($base) & not (package(=solidcraft-gpu) & test(/^path::/))" || status=1
if [ "$status" != 0 ]; then
# A failed golden gets the hint to re-record it (junit.xml lists the failures).
if [ -f "$junit" ] && tr '\n' ' ' < "$junit" | grep -q '<testcase name="tests::robustness_goldens::[^"]*"[^>]*>[[:space:]]*<failure'; then
echo "::error::A robustness golden changed. If the new result is intended, re-record it in this pull request and say why:"
echo "::error::ROBUSTNESS_GOLDENS_BLESS=\"why it changed\" cargo test --profile ci -p solidcraft-engine --lib robustness_goldens:: (see docs/robustness.md)"
fi
exit 1
fi
--ignore-default-filter -E "($base) & not (package(=solidcraft-gpu) & test(/^path::/))" || status=$?
if [ "$status" -ne 0 ] && [ "$status" -ne 100 ]; then exit "$status"; fi
# Cargo.lock or a Cargo.toml changed on a pull request or in a merge group.
if [ "$DEPS_RUN" = true ]; then
test "$ADVISORIES" = success
fi
# A merge group that reaches the wasm build.
if [ "$WASM_RUN" = true ]; then
test "$WASM" = success
fi
- name:Note a carried result
if:needs.changes.outputs.carried != ''
env:
@@ -1033,9 +1114,13 @@ jobs:
run:|
echo "This push only merges main into a change that already passed; the heavy checks were not repeated. Passing run: $CARRIED" >> "$GITHUB_STEP_SUMMARY"
# Every crate below the apps and the web app must build for the browser (`cargo xtask wasm`, a
# cargo check, no tests). In the merge queue for a group that reaches the wasm build (Select
# checks' `wasm`), where `ci` requires it; by hand with cross_compile.
@@ -10,6 +10,7 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
- No GPL/LGPL/AGPL code, not even reading it (OpenCASCADE, FreeCAD, SolveSpace, CadQuery, LibreCAD, QCAD): `cargo xtask licences --check`.
- Every asset is original or openly licensed with a row in ATTRIBUTION.md; read `assets/AGENTS.md` before icon work: `cargo xtask assets`, `cargo xtask icons`.
- Never crash: no unwrap/expect/panic/unsafe in non-test code (unsafe allowlist in crash-safety), errors are `Result`, input is hostile: clippy `-D warnings`, `hostile_params_never_panic`.
- Model decisions (what an operation does, which bodies it touches, which face or edge a point or name means, depths, nearness) use exact geometry; a mesh is for display, export, previews and mesh bodies (`xtask/mesh-decisions.txt` only shrinks): `cargo xtask mesh-decisions`.
- Everything is a command and programmatic calls never open dialogs: `skills/solidcraft-commands/SKILL.md`.
- One outer UI container, one camera path (`navigation::handle`), colours from theme tokens: `cargo xtask ui-containers`.
@@ -22,6 +23,7 @@ Work: ROADMAP.md, "Where help is wanted most" in CONTRIBUTING.md, issues labelle
- A changed default keeps the old behaviour behind a preference and fills the PR's `Changes a default:` line, and no second PR for an issue a lower-numbered one closes: `pr-checks.yml`.
- A regression test goes in the area's existing test file, never a per-bug file (#3226).
- Look at open PRs first, claim with a draft PR (lowest number wins), one topic per PR, never force-push `main`, no pushes just to catch up with `main`: `skills/solidcraft-contributing/SKILL.md`.
- A PR's title and first sentence make sense to someone who never saw your chat or the issue: `skills/solidcraft-contributing/SKILL.md`.
- Show observable changes with real screenshots or a recording, captured yourself.
- Run `cargo xtask ci` before every commit, without switching branches while it runs. `cargo xtask skills` keeps this file and `skills/` honest.
@@ -84,6 +84,8 @@ Editable drawing code, native projects and shipped exports are collected under `
| docs/book/src/generated/tool-preview.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/tool-preview.json`; gitignored) | MIT OR Apache-2.0 |
| assets/fonts/liberation-sans/LiberationSans-Regular.ttf | Red Hat, Inc. (Liberation Fonts 2.x; digitized data Google) | https://github.com/liberationfonts (Debian fonts-liberation), unmodified; licence text in assets/fonts/liberation-sans/OFL.txt; used for sketch Text outlines | SIL OFL 1.1 |
| assets/fonts/biz-udp-gothic/BIZUDPGothic-Regular.ttf | The BIZ UDGothic Project Authors | https://github.com/googlefonts/morisawa-biz-ud-gothic (Google Fonts), unmodified; licence text in assets/fonts/biz-udp-gothic/OFL.txt; used for web UI Japanese font | SIL OFL 1.1 |
| assets/fonts/craft-ui-sc/CraftUI-SC.otf | Adobe / Google Inc. (Noto Sans SC); SolidCraft subset | https://github.com/notofonts/noto-cjk Sans/SubsetOTF/SC Regular, glyph-subset for assets/locales/zh.json and renamed Craft UI SC (OFL reserved-name); licence text in assets/fonts/craft-ui-sc/OFL.txt; web UI Simplified Chinese | SIL OFL 1.1 |
| assets/fonts/craft-ui-tc/CraftUI-TC.otf | Adobe / Google Inc. (Noto Sans TC); SolidCraft subset | https://github.com/notofonts/noto-cjk Sans/SubsetOTF/TC Regular, glyph-subset for assets/locales/zh-TW.json and renamed Craft UI TC (OFL reserved-name); licence text in assets/fonts/craft-ui-tc/OFL.txt; web UI Traditional Chinese | SIL OFL 1.1 |
| tests/step-conformance/cone_point.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/cone_point_vertex.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/cylinder.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
@@ -101,6 +103,22 @@ Editable drawing code, native projects and shipped exports are collected under `
| tests/step-conformance/tiny_pin.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/torus_ring_nurbs.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/washer.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/kernel-cases/import/1721-closed-bspline-tube-face/input.step | step-conformance contributors | copy of tests/step-conformance/cylinder_nurbs.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#1721 | CC0-1.0 |
| tests/kernel-cases/import/2043-outer-bound-opposing-surface-sense/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#2043 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/258-cone-point-vertex/input.step | step-conformance contributors | copy of tests/step-conformance/cone_point_vertex.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/258-cone-to-point/input.step | step-conformance contributors | copy of tests/step-conformance/cone_point.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/258-tiny-pin/input.step | step-conformance contributors | copy of tests/step-conformance/tiny_pin.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#258 | CC0-1.0 |
| tests/kernel-cases/import/3098-bspline-edges-over-tiny-knot-span/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3098 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3208-extruded-ellipse-face-over-parameter-seam/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3208 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3352-vertex-off-its-edge-curve/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3352 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3730-void-oriented-shell-false/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3730 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/3880-cylinder-seam-edge/input.step | step-conformance contributors | copy of tests/step-conformance/cylinder_seam.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#3880 | CC0-1.0 |
| tests/kernel-cases/import/3880-nurbs-hemisphere-dome/input.step | step-conformance contributors | copy of tests/step-conformance/dome_nurbs.step (generated from formulas by https://github.com/dan335/step-conformance, corpus/generated, 96f30bb); kernel regression case for tangency-labs/solidcraft#3880 | CC0-1.0 |
| tests/kernel-cases/import/3963-closed-spline-edge-vertex-past-start/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#3963 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4005-cylinder-written-as-near-zero-cone/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#4005 | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4006-plane-written-as-cone-of-nearly-right-angle/input.step | SolidCraft contributors | synthetic STEP file written by hand from ISO 10303-21 for the kernel regression case of tangency-labs/solidcraft#4006 | MIT OR Apache-2.0 |
| tests/ssi-corpus/cases/*.json.gz, tests/ssi-corpus/LICENSE-MIT, tests/ssi-corpus/LICENSE-APACHE | ssi-corpus contributors (jyviko) | 119 surface/surface intersection cases with exact ground truth from https://github.com/jyviko/ssi-corpus (cases/data, b04c8a6), gzip-compressed, unchanged; SSI scorer fixtures (tests/ssi-corpus/README.md) | MIT OR Apache-2.0 |
| tests/ssi-corpus/cases/y23_*.json.gz | Yang, Jia and Yan (paper authors: published surfaces, figures and topology); ssi-corpus contributors (reconstructions and truth) | 25 cases built from Yang, Jia & Yan 2023, "Topology Guaranteed B-Spline Surface/Surface Intersection", ACM Transactions on Graphics 42(6), Article 211; each cites the paper in its `source` field | CC-BY 4.0 (paper); MIT OR Apache-2.0 (case files) |
| tests/step-regressions/rod_doubled_edge.step | SolidCraft contributors | written by SolidCraft from the commands of #4598 (a bored rod moved 100 mm and exported); import regression fixture | MIT OR Apache-2.0 |
| tests/oracle/17-loft/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/17-loft/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
| tests/oracle/23-bracket-multifeature/reference.stl | SolidCraft contributors | triangulation of our own recipe (tests/oracle/23-bracket-multifeature/recipe.json) built with FreeCAD as an external tool by tools/freecad-oracle | MIT OR Apache-2.0 |
@@ -125,6 +143,8 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/appearances/library.rs | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
| assets/appearances/opaque_finishes.rs | SolidCraft contributors | original illustrative opaque finish values; no external dataset, textures or measured engineering data | MIT OR Apache-2.0 |
| assets/fonts/biz-udp-gothic/OFL.txt | The BIZ UDGothic Project Authors | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/craft-ui-sc/OFL.txt | Adobe / Google Inc. (Noto CJK); SolidCraft header | Accompanying OFL for CraftUI-SC.otf | SIL OFL 1.1 |
| assets/fonts/craft-ui-tc/OFL.txt | Adobe / Google Inc. (Noto CJK); SolidCraft header | Accompanying OFL for CraftUI-TC.otf | SIL OFL 1.1 |
| assets/fonts/ibm-plex-mono/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/ibm-plex-sans/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/liberation-sans/OFL.txt | Red Hat, Inc.; Liberation Fonts contributors | Unmodified accompanying font licence | SIL OFL 1.1 |
@@ -185,11 +205,7 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/shaders/viewport.wgsl | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
| assets/styles/ui/palettes.rs | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-dark.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-dark-hard.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-dark-soft.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-light.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-light-hard.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/gruvbox-light-soft.json | SolidCraft contributors | original SolidCraft theme file mapping SolidCraft's UI colours to the Gruvbox palette's colour values (Gruvbox by Pavel Pertsev, https://github.com/morhetz/gruvbox, MIT) | MIT OR Apache-2.0 |
| assets/styles/ui/themes/solidcraft-95.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
| assets/styles/ui/themes/platinum-9.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
| assets/styles/ui/themes/cupertino.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
@@ -597,6 +613,165 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| assets/styles/ui/themes/1-bit-dark.json | SolidCraft contributors | original SolidCraft theme file | MIT OR Apache-2.0 |
| `assets/locales/pending/navbar-customisation.json` | SolidCraft contributors | Original navigation bar editor translations | MIT OR Apache-2.0 |
| `assets/locales/pending/navbar-slots.json` | SolidCraft contributors | Original navigation slot translations | MIT OR Apache-2.0 |
| assets/locales/bs.json | Tarik Sijercic (tsijercic1) | Original Bosnian translation of SolidCraft's English catalog; no commercial CAD text used | MIT OR Apache-2.0 |
| assets/locales/hr.json | Tarik Sijercic (tsijercic1) | Original Croatian translation of SolidCraft's English catalog; no commercial CAD text used | MIT OR Apache-2.0 |
| assets/locales/sr.json | Tarik Sijercic (tsijercic1) | Original Serbian (ekavian, Cyrillic) translation of SolidCraft's English catalog; no commercial CAD text used | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/finish_edit.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| `assets/locales/pending/sketch-tracking-guides.json` | SolidCraft contributors | Original alignment-guide preference labels and help text | MIT OR Apache-2.0 |
| assets/locales/pending/point-clouds.json | SolidCraft contributors | Original point-cloud UI strings and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/feature_group.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/mesh_body.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/timeline_play.svg | SolidCraft contributors | Original history playback icon; canonical grey_cube base and original action cue | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/timeline_stop.svg | SolidCraft contributors | Original history playback icon; canonical grey_cube base and original action cue | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/status_pin.svg | SolidCraft contributors | Original analytic pin icon for persistent viewport results | MIT OR Apache-2.0 |
| assets/locales/pending/render-wear.json | SolidCraft contributors | Original UI labels and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/equation_curve.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/locales/pending/sketch-recent-snap.json | SolidCraft contributors | Original preference messages for the recent centre and midpoint snap | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_horizontal.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_vertical.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_angle.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_parallel.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_perpendicular.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_tangent_external.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_tangent_at.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_tangent_two.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_bisector.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-circle.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-circle.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-flower.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-flower.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-involute.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-involute.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-line.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-line.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-parabola.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-parabola.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-spiral.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-spiral.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-wave.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-wave.json`; gitignored) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/print_face.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/locales/fi.json | SolidCraft contributors | Original Finnish translation of SolidCraft's English catalog, AI-assisted (Claude Code) clean-room from the English and not yet reviewed line by line by a native speaker; no commercial CAD text used | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/plane_axis_point.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-2x.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-2x.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-4x.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-4x.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-8x.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-8x.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-off.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/aa-off.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/agent-pointer-speed.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/agent-pointer-speed.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/ao-on.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/ao-on.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/assembly-move.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/assembly-move.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-card.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-card.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-column.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/browser-column.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-axes.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-axes.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-bends.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-bends.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-draft.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-draft.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-failed.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-failed.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-fixed.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-fixed.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-projected.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/colour-vision-projected.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/direct-interaction.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/direct-interaction.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/frame-rate.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/frame-rate.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-bottom.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-bottom.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-in-browser.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-in-browser.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-left.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-left.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-under-browser.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/history-under-browser.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/layout-schematic.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/layout-schematic.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/measure-axis-distances.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/measure-axis-distances.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/mouse-mapping.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/mouse-mapping.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-axes.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-axes.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-cube.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/navigator-cube.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-centre.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-centre.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-cursor.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-cursor.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-origin.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orbit-origin.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-y-up.dark.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-y-up.light.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-z-up.dark.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/orientation-z-up.light.svg | SolidCraft contributors | original SolidCraft artwork: the Orientation figure copied from the app and extracted from the Preferences redesign board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/quick-measure.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/quick-measure.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-bodies.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-bodies.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-faces-edges.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/select-faces-edges.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-conflict.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-conflict.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-keep.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-keep.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-previous.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-previous.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-unless-turned.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-exit-unless-turned.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-guides.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-guides.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-hide-glyphs.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-hide-glyphs.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-state-icons.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/sketch-state-icons.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/style-shaded-edges.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/style-shaded-edges.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-coarse.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-coarse.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-fine.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-fine.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-normal.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-normal.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-ultra.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tess-ultra.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-dark.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-dark.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-gruvbox.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-gruvbox.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-imported.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-imported.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-light.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-light.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-dark-half.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-dark-half.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-light-half.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/theme-system-light-half.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-cursor.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-cursor.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-extrude.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-extrude.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-hole.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-hole.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-placement.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/tool-placement.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/vertex-markers.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/vertex-markers.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-angles.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-angles.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-grid.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-grid.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-perspective.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-perspective.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-shadow.dark.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| docs/design/preferences/figures/view-shadow.light.svg | SolidCraft contributors | original SolidCraft artwork drawn for the Preferences redesign (tracker #9863), extracted from the design board as a standalone SVG | MIT OR Apache-2.0 |
| `assets/locales/pending/sketch-offset-instances.json` | SolidCraft contributors | Original offset instance-count label and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/settings_profile.svg | SolidCraft contributors | single-colour application/navigation icon master (64 grid), original analytic head and shoulder geometry for settings profiles | MIT OR Apache-2.0 |
| tests/kernel-cases/import/4561-convert-box-mesh-with-a-zero-area-triangle/box-degenerate.stl | SolidCraft contributors | synthetic ASCII STL written by hand: a box with one zero-area triangle, for the kernel regression case of tangency-labs/solidcraft#4561 | MIT OR Apache-2.0 |
| vendor/truck-shapeops | truck-shapeops 0.4.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | robust meshing and nearest-parameter fallback in booleans; degenerate intersection-curve rejection; face and edge history of booleans; trace macro; corner choice at vertices several intersection curves end on; reuse of an operand's meshes (vendor/README.md) |
| vendor/truck-geometry | truck-geometry 0.5.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | intersection curves divided from their neighbours' surface parameters; surface second derivatives (vendor/README.md) |
| vendor/accesskit_macos | accesskit_macos 0.26.3, https://github.com/AccessKit/accesskit (The AccessKit contributors) | MIT OR Apache-2.0 | the subclassing adapter and its tests from 0.27.2: dropping the adapter keeps AppKit's key-value observers (vendor/README.md) |
The naming corpus checks persistent names: every name a corpus design stores still finds a face or
an edge, and two builds name its faces and edges alike
(`cargo test --profile ci -p solidcraft-cli --test naming_corpus`).
[docs/mutation-testing.md](docs/mutation-testing.md) shows how to find kernel behaviour these
black-box suites miss.
@@ -220,8 +224,7 @@ Pull requests skip a few heavy tests (one to twelve minutes each), which run in
Check that validation after merging. They are listed in
`.config/nextest.toml` and the [testing page](docs/book/src/dev/testing.md):
- `solidcraft-engine`: `tests::hostile_params_never_panic`, everything in `tests::robustness` and
the seeds of `tests::robustness_goldens` (`seed_00` … `seed_95`; pull requests that change the kernel, truck or the goldens run all but the slowest, `SLOW_SEEDS` in `ci.yml`),
- `solidcraft-engine`: `tests::hostile_params_never_panic`, everything in `tests::robustness`,
@@ -58,9 +58,9 @@
- **Web:** [try it in your browser][web-app], no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the
[downloads page](docs/downloads.md). The downloads aren't signed yet: on Windows choose
**More info**, then **Run anyway** in SmartScreen; on macOS right-click SolidCraft and choose **Open**
the first time. On SolidCraft 0.11 to 0.14, download once by hand; see
[downloads page](docs/downloads.md). The macOS app is signed with a Developer ID and notarized by
Apple. The Windows downloads aren't signed yet: choose **More info**, then **Run anyway** in
SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see
Status as of **2026-10-14**. SolidCraft supports parametric modelling (sketch →
features → parametric timeline) as an open, pure-Rust, agent-drivable application.
## At a glance
| Question | Answer |
|---|---|
| Where are we? | **M0 and M13 done; M1, M2, M5–M7, M9, M10, M14 in progress.** Sketch with solver and the full SKETCH create/modify set; extrude, revolve (two sides, symmetric, to object), fillet/chamfer (variable radius, chord length, a radius per edge, corner patches), holes, threads (cosmetic and modelled), patterns, mirror, shell (inside/outside/both), draft, loft, sweep, coil, split body and split face, delete face, construction planes, axes and points; persistent naming of faces and edges; parameters and configurations; components, joints, motion studies, exploded views; sheet metal and a plastic enclosure subset; STEP/IGES/3MF/STL/OBJ/DXF; FreeCAD/Rhino import; autosave and crash recovery; desktop and browser (wasm) app, CLI, MCP server. |
| Features | Every registered command by area — [docs/features.md](docs/features.md) (`cargo xtask features`); registry breadth does not establish workflow or geometric depth |
| Reference tests | [Current case count and results](docs/oracle.md): public cases in `tests/oracle/` with analytic or FreeCAD-computed expected values, checked by the reference-test job in [CI](.github/workflows/ci.yml). |
| Tests | Solver, profiles, kernel booleans/blends/measures, expressions, timeline, persistent naming, file formats and migrations, assemblies, sheet metal, engine end-to-end, hostile-input fuzz over every command and headless UI scenarios. `cargo xtask ci` reports the current passing counts. |
| Time to a useful alpha (M0–M6) | ≈ **82 agent hours** remain (sum of the M1–M6 estimates below) |
Optional GPU viewport ambient occlusion is available in View settings and Graphics preferences,
with persistent settings, Performance/Quality graphics presets (Quality combines AO, Fine tessellation and adaptive 2× supersampling; manual combinations show Custom), and the
`view.ambient_occlusion` and `view.graphics_preset` commands. See [display settings](docs/ambient-occlusion.md).
## Scope (owner decision, 2026-10-07)
The issue batch adds preservation of blind pockets in through cuts, associative projected
offsets and plastic face placements, XZ (+Y normal) with a v6 migration preserving older
| M1 | Sketch depth: command coverage implemented — projection/intersect/include as linked geometry (auto-project on faces, lost-reference warnings, break link), full SKETCH create/modify set (slots, polygons, tangent arcs/circles, ellipse, fit/control splines, conic, text, trim/extend/break, fillet/chamfer, offset, mirror, patterns, move/scale, blend curve, centerline), constraints incl. curvature and polygon with over-constraint refusal, Shift-picked line midpoints in Horizontal/Vertical using persisted points and ordinary constraints (#2087), driven/arc-length/linear-diameter dimensions, AutoConstrain, DXF/SVG insert, 3D sketch curves (Project To Surface, Intersection Curve, Isoparametric Curve, Spun Profile), exact free-form profiles (B-spline/NURBS edges, any spline degree, curves cut by crossings), sweeps and pipes along 3D sketch curves, canvases and decals, curvature combs. Exact free-form Extend and certified associative offsets now preserve geometry and IDs through edits, deletion and reopen. Occurrence-frame 3D wires now store explicit coordinate spaces and retain points and analytic fits through moves, refresh, undo and reopen. Constructive sketch solving (Owen 1991, Fudos & Hoffmann 1997) ahead of the numerical solver: points and rigid clusters are placed on the branch the sketch had, so dimension edits and drags keep their solution; edits that would turn a sketch over are refused; drags re-solve only the sketch per frame. Remaining workflow repairs: mixed offset junctions, legacy natural-spline seams, and damaged legacy wire links lacking frame provenance | in progress | 4 |
| M2 | Robust modelling: coplanar booleans in the kernel, holes (placed on faces, at distances from reference edges, and on sketch points), threads (cosmetic, then modelled), patterns, mirror, shell, draft, split, construction geometry | in progress | 16 |
| M1 | Sketch depth: command coverage implemented — projection/intersect/include as linked geometry (auto-project on faces, lost-reference warnings, break link), full SKETCH create/modify set (slots, polygons, tangent arcs/circles, ellipse, fit/control splines, conic, text, trim/extend/break, fillet/chamfer, offset, mirror, patterns, move/scale, blend curve, centerline), constraints incl. curvature and polygon with over-constraint refusal, Shift-picked line midpoints in Horizontal/Vertical using persisted points and ordinary constraints (#2087), drawing snaps to where two lines, circles or arcs cross (#4967), driven/arc-length/linear-diameter dimensions, AutoConstrain, DXF/SVG insert, 3D sketch curves (Project To Surface, Intersection Curve, Isoparametric Curve, Spun Profile), exact free-form profiles (B-spline/NURBS edges, any spline degree, curves cut by crossings), sweeps and pipes along 3D sketch curves, canvases and decals, curvature combs. Exact free-form Extend and certified associative offsets now preserve geometry and IDs through edits, deletion and reopen. Occurrence-frame 3D wires now store explicit coordinate spaces and retain points and analytic fits through moves, refresh, undo and reopen. Constructive sketch solving (Owen 1991, Fudos & Hoffmann 1997) ahead of the numerical solver: points and rigid clusters are placed on the branch the sketch had, so dimension edits and drags keep their solution; edits that would turn a sketch over are refused; drags re-solve only the sketch per frame. Remaining workflow repairs: mixed offset junctions, legacy natural-spline seams, and damaged legacy wire links lacking frame provenance | in progress | 4 |
| M2 | Robust modelling: coplanar booleans in the kernel, holes (placed on faces and on sketch points), threads (cosmetic, then modelled), patterns, mirror, shell, draft, split, construction geometry | in progress | 16 |
| M3 | General fillets and chamfers (curved edges, chains, vertex blends); saddle rolling-ball surfaces now use continuous seam sections and arc-length fitting with shared contact boundaries and bounded accuracy checks; tiny rim edges remain selected instead of nearby wall seams when filleting (#2498) | in progress | 30 |
| M4 | Files: STEP import (done — [docs/step-import.md](docs/step-import.md)), FreeCAD/Rhino solids through cadmpeg (done, desktop, browser and CLI), 3MF export and 3MF/STL import as mesh bodies (done), 3MF with B-rep face tags ([docs/formats/3mf-face-tags.md](docs/formats/3mf-face-tags.md), done), constant-section parametric mesh reconstruction, DXF sketches, OBJ import, PLY/XYZ point clouds as a modelling reference and PLY meshes (done — [docs/point-clouds.md](docs/point-clouds.md), #5151) | in progress | 6 |
| M5 | Persistent naming of faces and edges (docs/book/src/dev/naming.md): faces named from their exact kernel-reported history (sketch curve sides, caps, revolve sections, primitive sides, blends, shell inner walls, pattern/mirror copies; split pieces told apart by the faces around them, lumps of a cut body named after their faces), edges by their faces; fillets/chamfers, sketches on faces, shell/draft/offset/replace faces, hole placements, joint origins and face appearances resolve by name first and warn when the entity split or vanished: done. sheet metal edges by base sketch line and flange side, shell inner faces, sweep and loft roles: done. kernel-reported face history: done (merged faces answer to every name; operations without history yet fall back to geometric names, flagged unverified; format 14 keeps older designs' geometric names). Left: history through sheet metal, plastic, surface and emboss features; FaceSource certificates through history | in progress | 20 |
| M6 | UI depth: selection feedback and origin (done), timeline editing (done: hover and selection highlight modifier faces, including fillets and chamfers; edit feature, history marker drag, dependency-checked single and multi-item reorder, suppress, rename, delete with dependents, re-resolved references; redefining selections refreshes persistent edge/face references while retaining feature identity and dimension names; responsive feature history with width-driven icons/names/title, snapping width resize, bottom/left/browser-stack docking, shared-column collapse, rollback bar, multi-selection and persistent folders), right-docked dialogs (done), live previews for every feature dialog (done), keyboard-first commands with on-canvas value boxes and sketch inline dimensions (done), drag manipulators with automatic join/cut (done: extrude incl. two sides, fillet, shell, hole depth, move, pattern spacing, revolve rotator, extrude taper), dark theme (done), right-click menu with Repeat (done), measure tool (done), section analysis (done), selection filter (done), drag-solve of sketch points (done); appearance controls now preserve body/face/component targeting, named transparent looks, reuse/search and override removal; Browser Expand All / Collapse All (`browser.expand_all`, `browser.collapse_all`) on the design and component menus; preferences | in progress | 6 |
| M7 | Thin extrude (walls along open or closed curves: centre, inside, outside or two sides; mitred corners, crossing walls joined; #721), sweep, loft (incl. to a point), rib and web (to next / depth), emboss (planar faces and exact radial emboss/deboss of bounded orthogonal profiles on complete exterior cylinders/sleeves), thread (cosmetic, and modelled M3–M20 outside and inside: the ISO profile screwed in as a faceted cut), coil (smooth B-spline helical walls), pipe, pattern on path, patterns of bodies and components, replace face (parallel), align, remove, feature copy/paste: done. Unique eligible cylindrical targets are inferred for new Emboss features. Left: general curved-face emboss and exact (unfaceted) modelled threads | in progress | 12 |
| M8 | Surface workspace (#772). Done: Patch (sketch regions; edge loops filled G0, plus `crown`), Stitch, Thicken (planes and cylinders), Extend (straight edges of planar surfaces), Trim (by a plane, a face or sketch curves swept onto the surface, keeping a side or the picked regions; mutual trim of two surfaces, extended to meet and stitched, #767), Delete Face (healing), Boundary Fill, zebra/draft/curvature-map analysis, Surface Extrude/Revolve/Sweep/Loft from open and closed curves, Offset, Unstitch and Reverse Normal; the continuity-driven core (`kernel/src/bridge.rs`, G0–G3 Hermite rows) with **Blend** (`surface.blend`, #764: edge chains along one or several faces, closed rims paired seam to seam or from picked seams, a dialog), **Match** (`surface.match`), **Boundary** (`surface.boundary`, #763 — two sketch curves exact with G0–G3, three or four as the flat patch of their loop, and curve networks: Coons and Gordon surfaces through sketch, 3D-sketch or edge curves, a point for a three-sided side, G1/G2 against the faces along one direction's edges, joined into their body on request; G1/G2 on two sides that meet at a corner waits for the Gregory-type corner), **Fair** (`surface.fair`, CV fairing), **continuity analysis** (`inspect.continuity`, #770; a toolbar tool with edge markers and a legend, and curvature combs along face isocurves) and a multi-section **loft** with per-end continuity and crown, and guide rails on solid and surface lofts (one or two, scaling or stretching the sections between; #201). Also in the Class-A pass: G1…G4 blend curves in the sketch, chord and variable-radius fillets on curved edges (with honest refusals where the fit cannot hold), and a G2 corner patch where filleted edges meet (kernel; the command refuses until the patch's sections can be sewn to the blends' contacts). Left: bias/form-factor fillet sections (design recorded), a Gregory-type corner, surface Fillet between separate surface bodies (#769), Ruled (#762), Untrim (#761), curved-face Extend (#760), and every remaining #757–#772 item | deferred | — |
| M9 | Components and assemblies: New Component / Create Components from Bodies, active component, per-component origin/bodies/sketches/timeline entries, occurrences with transforms, Copy/Paste vs Paste New, nested Browser tree with visibility and isolate; Ground, Move/Copy of occurrences, joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) by joint origins with limits and Drive Joints, closed kinematic loops (four-bar, slider-crank: the loop's other joints follow the driven one on its branch, and driving stops where a loop can no longer close), cams (`joint.cam`: a revolute cam drives a slider or revolute follower along a closed sketch profile or the cam's edges, knife, roller or flat followers, worked out again when the profile changes; drives, studies, closed loops, contact sets), As-built Joint, Rigid Group, Contact Sets (driving and motion studies stop where bodies in a set would pass through each other), Motion Study (joint values keyed along a timeline, playback, export of occurrence positions as JSON/CSV), motion analysis (joint values and a point's path charted over a study as value, velocity and acceleration; the parts that collide along a study, with the steps where they do), Exploded views (automatic or by hand, shown without changing placements, and exported as an animation coming apart and back together); interference, per-component physical properties; STEP with assembly structure; URDF export for robot simulators (links with meshes, mass and inertia; joint chains whose values match Drive Joints; docs/urdf.md). Physical properties now measure material-aware component/occurrence placements, descendants and repeated instances, including pending moves and body reassignment offsets; contact geometry and automatic exploded centres respect those offsets. Groundwork done: component tree, occurrences with transforms (instances, Paste New), world placement, active component as authoring frame, ground, Capture/Revert Position, moving bodies and sketches. UI: ASSEMBLE panel dialogs for New Component, Joint (snaps on faces, edges, circles and vertices; animated motion preview; offsets, flip, limits), As-built Joint, Joint Origin, Rigid Group, Drive Joints (live slider), Motion Link, Cam and Interference (overlaps shown red); joints in the timeline and the Browser | in progress | 32 |
| M10 | Sheet metal: flange (base, edge, contour), hem, unfold/refold, convert, flat pattern + DXF, rules: done. PLASTIC enclosure subset: Boss, Rib, Web, Lip/Groove, Snap Fit, Rest, Plastic Rules (library, edit, assign; rule draft and clearance as feature defaults): done, tested against hand-computed geometry. UI: SHEET METAL and PLASTIC tabs with dialogs (live preview, Edit Feature, pre-selection) for Flange, Hem, Unfold/Refold, Convert, Sheet Metal Rules, Create Flat Pattern (flat view with bend lines, bend table CSV/JSON and DXF export with exact circle/arc/line cutouts), Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Fold (bend along a sketch line); flanges meeting at a corner closed at any angle with the rule's gap; edge flanges with their own angle and height per edge in one feature; corner reliefs (notch, round, rectangular, tear) chosen by the rule; Convert to Sheet Metal from a solid or shelled body by its bend edges (flat faces, sharp bends) | in progress | 36 |
| M11 | 2D drawings | deferred | — |
| M12 | Release: cross-platform packages, verification and deliberate publication implemented; original current-UI demo refreshed. Trusted distribution signing and broader performance work remain | in progress | 16 |
| M14 | Configurations: a table of rows (parameter expressions and feature suppressions per row) switched with config.activate (undoable, all or nothing), kept through parameter renames and feature deletes (config.configure, config.table, config.column/row/activate). Per-row body materials and appearances (library looks, custom colour/opacity and clearing overrides), undoable activation and save/reopen: done. Ordered typed configuration rules, atomic validation and structured rule editing: done. Component appearance and certified semantic face style columns, atomic preview/apply and independent-copy remapping: done. Exact constructed sketch-side and immutable imported-face lineage now preserve legacy names and reject retargeting. Left: ambiguous shifted/two-sided caps | in progress | 4 |
| M13 | Never lose work: atomic saves (temporary file, flush, rename; a crash at any moment leaves the old file or the new one) with the replaced version kept as `<file>.bak`; autosave of unsaved changes to the recovery folder every 5 minutes (preference) and after big operations, only when something changed; "Recover unsaved design?" on the next launch (`doc.recovery_list`, `doc.recover`, `doc.recovery_discard`); a kill-mid-save test (process killed while saving a 0.5 MB design 25 times). File format: `"format": "solidcraft/12"`, older formats upgraded step by step (`doc::format`), newer ones refused with a message, out-of-range numbers and broken placements refused; a corpus of designs saved by M0, components-era, joints-era and current builds (apps/solidcraft-cli/tests/corpus) that must open and evaluate as saved; damaged and hostile variants (truncation, bit flips, hostile values, removed keys, repeated features, deep nesting) never panic | done | 6 |
| M15 | Frames and weldments (#4003): structural members along 2D and 3D sketch lines, butt and mitre corners, trim to faces and bodies, end caps, gussets, cosmetic welds and a cut list. Done: the profile library (`frame.profile.list`, `frame.profile.properties`, `frame.profile.insert`): bar, round bar, rectangular and round tube, angle, channel and I-beam, each SolidCraft's own parametric definition with exact fillet arcs and exact section properties (area, centroid, second moments), tested against hand-computed values; members (`frame.member`): one body per straight line of a 2D or 3D frame sketch, following parameter edits, with a built-in profile (its dimensions parameter expressions) or a profile sketch (its drawn material by alternating nested loops), anchor, angle and mirror; each member's name kept with its line. Left: corners, trims, end caps, gussets, welds, cut list, FRAME tab and dialogs | in progress | 60 |
M6 navigation preferences include **Touchpad**: Shift + pointer movement pans, Alt/Option +
pointer movement orbits without a mouse button, and vertical scrolling zooms. Other presets
retain their saved two-finger scroll preference; camera motion is available through
`view.navigate` and modifier-aware `ui.move` automation.
With the **Fusion** preset and two-finger pan enabled, two fingers pan and Shift + two fingers
orbit freely, with pinch zoom and mouse bindings unchanged. The shared navigation handler
applies the same gestures to model and Render views and blocks orbit on flat pages.
editable, and Automatic size returns to the face's suggestion. Cosmetic/modelled and
full/partial-length options remain available. This does not add tolerance classes or
left-hand threads.
- New Body extrusion and face-offset previews show completed intermediate geometry while a
drag continues, then catch up to the exact final value. Changes to the selected geometry,
operation or feature still discard obsolete results. Distance arrows and their value boxes
follow the current frame's input.
- Large fine modelled threads use pitch-based helix resolution and tighter faceted
reconstruction fallbacks, preserving thin crests and closed shells on large shafts.
## Physical material data
- Physical material card validation (#923/#922) provides typed SI mechanical and
thermal data, per-property sources/conditions and isotropic/orthotropic stability
checks through read-only `material.properties.validate`. It does not assign or
persist properties, provide a solver or enable rendering; see
[the contract and staged follow-ups](docs/physical-material-cards.md).
- Directional elasticity (#994) queries the validated card in material-local axes
through read-only `material.properties.directional`, with source/condition review.
It does not assign body frames, predict structural behavior or enable a solver.
## Library foundations (#785, #786, #787)
- Local scalar libraries (#846) inspect/export bounded portable catalogs and copy exact
selected appearance/material revisions into existing design definitions in one undo step.
Appearance offers local loading/search/export; physical materials use existing commands.
This slice is independent of the render stack and does not change the document format.
See [the contract and limits](docs/book/src/dev/local-libraries.md).
- Proposed phases cover offline bundled/project/user packs, physical materials and
appearances, editable wood mapping, and parameterized component/assembly families.
Stable identity/revision, copied design definitions, provenance and resource limits
apply from the first implementation. Existing material, appearance and standard-part
commands remain the application paths. See [the proposal](docs/book/src/dev/libraries.md)
for source/license review and acceptance gates. This is planning only: pack loading,
texture rendering and expanded component families are not implemented by this entry.
## Render foundation
- Original starter appearances (#1722): 34 opaque recipes through existing commands, with six explicitly unavailable glass recipes and preserved legacy looks; see [the contract](docs/render-starter-appearances.md).
- Bounded linear film accumulation (#1696) supplies caller-admitted mean/variance storage and complete-pass views; actual progressive consumers remain separate. See [the film contract](docs/render-film.md).
- Definition-local visual mapping (#1214) supplies a bounded numerical frame, physical repeat coordinates and a deterministic one-time grain-axis suggestion. It adds no saved record or texture consumer; see [the mapping contract](docs/render-visual-mapping.md).
- Explicit texture normalization (#1218) produces completed float RGBA with
role-aware linear color/data semantics, bounded matrix/TRC ICC conversion and
opt-in EXIF orientation. It retains high-precision raw samples and records lossy
gamut clipping only when explicitly requested. It is not a renderer/resource
consumer; see [the supported policy and limits](docs/render-texture-normalization.md).
- Opt-in opaque PBR (#1046) connects persisted surface parameters to the integrated
product viewport and CPU PNG, using a fixed direct-light studio. Geometry and mass
stay unchanged. HDRI, transmission and textures remain separate gates.
See [the consumer and limitations](docs/render-opaque-pbr.md).
- Combined integration is tracked in #842, with independent scalar libraries in
#863 and richer PBR/material-card transport in #1086. See [phase boundaries and validation gates](docs/render-integration.md).
Render/library consumers use the merged asynchronous picker (#1127). Material-card
UI (#1094), texture mapping and HDRI lighting remain explicit follow-ups.
- R4a adds bounded CPU product-image jobs, cancellation and atomic PNG export through
engine commands, the Render panel, CLI and persistent MCP. Immutable captures and
results stay outside persistence/undo; native workers and cooperative browser tasks
share the same work protocol. See [jobs, limits and export](docs/render-jobs.md).
- R3 adds an overlay-free product scene and the integrated Render workspace, with
runtime GPU host capabilities, per-document drafts and named camera/background
controls. Design keeps its camera and drawing policy. Raster transparency remains
approximate; PBR and environments are later slices. See
[workspace and scene contracts](docs/render-workspace.md).
- R2 adds bounded named render setups in document format 21 and the read/save
and selected occurrence frames; cancel and successful edits preserve one-step undo history.
Placed feature edits preview through the edited timeline entry, and cylindrical Emboss guides
use the sketch's actual target, author or uniquely placed third-component frame.
Revolve rotators follow the actual signed axis and support symmetric and two-sided extents;
dragging a To Object extent converts its derived value to an explicit angle. Legacy reversed-axis
symmetric geometry is preserved through format 11's explicit legacy convention. New revolves
use the sketch-normal direction for each selected profile, including To Object and curved
target trimming, independently of the selected axis sign.
- Cylindrical emboss/deboss wraps bounded orthogonal line profiles, including holes, concave
outlines and nested islands, onto complete exterior cylinders or coaxial sleeves with exact
radial walls. New features infer a unique eligible cylinder when the face field is empty;
ambiguous targets require an explicit face. Saved target
and author occurrence paths retain the chosen placements; missing/split faces refuse rather
than retarget. General free-form profiles, seams, stepped cylinders and other curved surfaces
remain unsupported. STEP round-trip and independent radial/volume checks cover this subset.
- Shell and offset faces work on bodies of planes, cylinders, cones, spheres and tori (convex or not:
filleted boxes, bosses, domes, countersinks; corners where four or more planes meet, such as a
floor falling to a drain, as long as the corner's edges are all convex or all concave); draft on convex planar bodies and on walls (planes, cylinders → cones) between caps; lofts through three or more sections are smooth (B-spline sides through every section), two
sections ruled. Circular-meridian barrels retain curved inner walls through either axial
opening (#2421). Solid lofts preserve holes through sections with matching hole counts
(#2435), including inner walls and caps with openings; a hole cannot appear or disappear
between sections, and sections with holes cannot collapse to a point.
- Sketch corner tools: fillet and all three chamfer modes pick a connected corner even when
its endpoint overlaps the fixed origin or a loose point. Ordinary drawing still snaps to
the origin; clicked UI regressions verify geometry, closed profiles and undo.
islands share the same boundaries in flat preview, DXF and unfolded solids. Detached material
pieces survive unfold/refold as one logical sheet group, including split flanged sheets.
Cut-outs made in the flat pattern cross bends at any angle or curved: their edges fold to
helices and curves on the bend, their walls square to the sheet. Free-form bases use bounded
sampling. A fold crosses the sheet's own outer edges the same way, slanted or on any curve,
with the outline exact in the flat pattern and its DXF, and flanges and other folds still go
on the panels.
Parallel prismatic partial-depth cuts retain pocket side and depth through transfer and
unfold/refold, with separate pocket contours in preview and DXF. Planar Intersect preserves
exact holes and retained islands, including the union of multiple selected profiles, and
records complementary depth layers as pockets while retaining the stock gauge. Unsupported
tapered or bend-crossing machining refuses atomically instead of restoring material later.
Sketches attach to a sheet's flat faces (base and flanges, either side) by panel, in the
flat pattern's coordinates, and follow it through rebuilds and unfold/refold.
A flange on another flange's far edge (a return) follows that flange's closed end and keeps
clear of the flange beside it, and the returns of one feature are mitred toward each other
with the rule's gap where their flanges meet at a corner; returns of separate features, and
flanges on returns, are not closed toward each other.
- Rolling-ball fillet accuracy: independent offset-cylinder tee references check surface
distance, actual trimmed tessellation, supporting-cylinder contacts and tangency at two
scales. The measured trimmed-part error is below 0.0001 mm; this is an analytic geometry
check. Under-resolved fits return an error.
- Contact driving checks the trajectory between clear endpoints, including linked joints,
playback and sparse motion exports. Checks use bounded tessellation samples, not exact
continuous collision detection; local thin walls and small details remain limitations.
See [contact-set limits and recovery](docs/contact-sets.md).
## Assembly dragging
The design's first part is grounded when it is made, and a left-button drag repositions a free part (`occurrence.drag`: one undo step, exact occurrence paths including repeated jointed definitions, any floating-chain member carries the chain, grounded parts and joints hold where present, Escape cancels).
## 3D sketch bridges
3D sketch drawing snaps to points on other visible sketch planes without flattening them onto
the active plane. Bridge endpoints capture their source positions; associative endpoint links,
construction-plane selection of 3D wires and loft guide rails remain separate work.
Feature dialog header chevrons collapse and restore the form without discarding selections
or edited values, including the Appearance panel.
## Construction on 3D paths
Plane Along Path has a viewport path selector, fractional position, live preview and timeline
editing. Construction planes and points resolve drawn 3D wires without applying their sketch
plane a second time. Curved paths use sampled segments; multi-curve chains, absolute distance
and reference-object placement remain separate work, as do loft rails and centerlines.
## Design properties (#1015)
- Designs carry project, part number, revision, author, organization, description and licence
in an optional `metadata` object (File → Design Properties…, `document.metadata.*`,
`inspect_design`). STEP and IGES headers and 3MF model metadata take the fields their format
has a place for. Other tools keep their own data under a reverse-DNS key, kept as it is
through open, edit and save and never exported. See [design properties](docs/book/src/guide/files.md#design-properties).
Per-component properties (a part number per component) can follow with the same type.
## Document-opening performance
- Desktop STEP import prepares consecutive independent solids in bounded batches with up
to eight workers, retaining serial traversal, result order and persistent source identities.
The web path remains serial. Original multi-solid fixtures show 64–81% lower complete
import times; single-solid assembly parts are not scheduled across nodes. See
[measurements and limits](docs/perf.md#parallel-step-body-preparation-2026-10-12).
- Design containers (#303, phase one) separate and deduplicate STEP, raw images and
lossless binary mesh arrays while keeping plain JSON as a supported Save As/export
format. Generated-mesh storage measurements reduce serialization and decoding work;
a seekable reader defers original blobs until after provisional display.
See [container format](docs/design-container.md) and [performance measurements](docs/perf.md).
- Warm saves with explicit `cache: true` can include a versioned native B-rep cache through SolidCraft-owned topology
and geometry records, with a separate truck adapter and bounded binary reader. Exact
face-source certificates and operation history survive codec round trips. A provisional
picture can be generated before original blobs are read; editing and measurement wait
for authoritative reconstruction. Cached metadata binds preview and reconstruction to
the same document despite concurrent file writes. Default saves omit this cache and never force cold
evaluation or meshing; explicit `preview: true` remains a separate warm-mesh option.
Keys, resource budgets and document/revision guards reject incompatible, hostile or
stale results. A second modelling kernel still requires its own tested adapter.
- Warm saves with explicit `cache: true` can also carry a bounded PNG thumbnail from already cached meshes.
Home reads it without rebuilding the design when its local picture is missing;
mismatched or malformed thumbnails fall back to normal generation. The image is
kernel-independent and saving never forces cold meshing to produce it.
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n";
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--profile-out trace.json] [--json-out FILE] [--allow-errors] [--validation each_step|each_feature|off]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--validation: when SMLib's full check runs on the features computed (diagnostics.validation), default each_feature)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n (--profile also records where the time goes, SMLib's calls, kernel operations, features, commands and import stages,\n and prints the table to stderr: count, total, self time and longest per span; --profile-out FILE writes the spans\n as a Chrome trace for chrome://tracing or ui.perfetto.dev; SOLIDCRAFT_PROFILE=1 does the same for any command)\n";
/// `eval`'s lines in the usage.
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n";
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] [--profile] [--profile-out trace.json] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n (--profile and --profile-out as for run)\n";
/// `script`'s lines in the usage.
constUSAGE_SCRIPT: &str=" solidcraft-cli script <design.sc|script.json> [--out script.json]\n (the design's history as a command script that eval and run replay)\n";
/// `bench-open`'s lines in the usage.
constUSAGE_BENCH_OPEN: &str=" solidcraft-cli bench-open <design.sc | part.step> [--parse-only] [--save OUT.sc] [--display LEVEL [--edit NAME EXPR]] [--ops script.json]\n (--ops: after opening, run each command of the script and undo it, timing the command, the\n evaluations it caused and the view it leaves: placing and meshing what changed)\n";
constUSAGE_BENCH_OPEN: &str=" solidcraft-cli bench-open <design.sc | part.step> [--parse-only] [--save OUT.sc] [--display LEVEL [--edit NAME EXPR]] [--ops script.json] [--profile] [--profile-out trace.json]\n (--profile and --profile-out as for run)\n (--ops: after opening, run each command of the script and undo it, timing the command, the\n evaluations it caused and the view it leaves: placing and meshing what changed)\n";
constUSAGE_SNAPSHOT: &str=" solidcraft-cli snapshot <script|design> [--in design.sc|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27]\n solidcraft-cli snapshot --in <design.sc|part.step> --out shot.png ...\n (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n it shows) and color #rrggbb, either or both, once per body;\n --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n is visible inside the material it meets; a later --body overrides it;\n --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON)\n";
constUSAGE_SNAPSHOT: &str=" solidcraft-cli snapshot <script|design> [--in design.sc|part.step] --out shot.png [--width W] [--height H] [--view NAME | --camera JSON] [--no-grid] [--no-axes]\n [--body NAME:opacity=0.3,color=#rrggbb]... [--tool NAME]... [--section z=27] [--quality coarse|normal|fine|ultra]\n solidcraft-cli snapshot --in <design.sc|part.step> --out shot.png ...\n (as with run, --in starts from a design and the script runs on top of it; an option snapshot doesn't take is an error;\n --view: iso, front, back, top, bottom, left, right, or the name of a view saved in the design with view.save;\n --camera: {target: [x,y,z], yaw, pitch, distance, fov?} in mm and radians, as the MCP screenshot takes it (docs/mcp.md);\n --no-grid and --no-axes leave the ground grid (on Z 0) and the origin's axes out of the picture;\n --body: how one body is drawn, as appearance.assign takes it: opacity 0-1 (below 1 is see-through, so what is inside\n it shows) and color #rrggbb, either or both, once per body;\n --tool: draw this body solid in the tool colour and every other body see-through, so a cut's or a join's tool body\n is visible inside the material it meets; a later --body overrides it;\n --section: cut the model as inspect.section does, so the inside shows: z=27 (the plane through that world\n coordinate, keeping the smaller side), add ,flip to keep the other side, or XY, XZ, YZ, or its own JSON;\n --quality: the display quality the bodies are meshed at, as the app's setting (default normal))\n";
constUSAGE_KERNEL_CASES: &str=" solidcraft-cli kernel-cases <case-dir>... [--json] [--dumps=DIR] [--validation=each_step|each_feature|off]\n (the kernel regression rig, tests/kernel-cases, on SMLib; --dumps: each case's\n failing SMLib calls leave their inputs for replay in DIR/<area>-<case>; --validation: when SMLib's\n full check runs (diagnostics.validation), default each_feature)\n";
/// The flags every command takes, at the end of the top-level usage.
constUSAGE_DEBUG: &str=" --debug, with any command: what SolidCraft logs (why a body has no display plan, why a save left its\n model cache out), on stderr; RUST_LOG=error|warn|info|debug|trace sets one level for every crate\n";
constUSAGE_DEBUG: &str=" --debug, with any command: what SolidCraft logs (why a body has no display plan, why a save left its\n model cache out), on stderr; RUST_LOG=error|warn|info|debug|trace sets one level for every crate\n --max-file-size SIZE, with any command: read STEP and import files and design files up to SIZE for this run\n (for example 2GB or 1500MB; at most 16GB; the defaults are 512 MB and 256 MB, and a smaller SIZE keeps them)\n";
/// The commands the CLI takes, in the order the top-level usage lists them.
out.push(format!("{n} at {x:?}, then {m} at {y:?}"));
}
}
for((r,_),(q,_))ina.refs.iter().zip(&b.refs){
ifr!=q{
out.push(format!("{r}, then {q}"));
}
}
ifa.refs.len()!=b.refs.len(){
out.push(format!("{} stored names, then {}",a.refs.len(),b.refs.len()));
}
out.truncate(cap);
out
}
/// Designs whose names differ from one build to the next today: (design, why). Their
/// differences are printed, not failed on, until the cause is fixed; a stored name that finds
/// nothing still fails.
constUNSTABLE: [(&str,&str);1]=[(
"regressions/closed_sweep_torus_cut",
"the halves of each swept wall lie level along every axis, so which is `#1` and which `#2` follows the order the kernel gives the faces in, which changes from one build to the next",
"The graphics device was reset (the graphics driver stopped responding), so SolidCraft closed and started again. Unsaved changes were kept for recovery.",
);
ifsoftware{
note.push_str(" This start uses software rendering, which doesn't depend on the graphics driver.");
}
ifletSome(reason)=self::reason(reason){
note.push_str(&format!(" The graphics driver reported: {reason}"));
}
note
}
/// Start SolidCraft again with the same arguments, the loss stamped at `lost_at`, on the software
/// renderer when `software`.
pubfnrestart(software: bool,lost_at: u64){
letOk(exe)=std::env::current_exe()else{return};
/// The command that starts `exe` again with `args`, the loss stamped at `lost_at` and its
/// `reason`, on the software renderer when `software`.
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
bherbruck
